blob: 51c6cbd29371ea316e8ee4ba54ee93660899c7ca [file] [log] [blame]
2007-12-31 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (unpack_nibble): Use fromhex.
* symtab.c (find_line_common): Always set exact_match.
2007-12-31 Daniel Jacobowitz <dan@codesourcery.com>
* hppa-linux-nat.c: Use hppa-linux-offsets.h.
* hppa-linux-offsets.h: New file.
2007-12-30 Pedro Alves <pedro_alves@portugalmail.pt>
* configure.tgt (*-*-mingw32ce*): Set gdb_osabi to
GDB_OSABI_WINCE.
(*-*-mingw* | *-*-cygwin*): Set gdb_osabi to GDB_OSABI_CYGWIN.
2007-12-29 Nick Hudson <nick.hudson@dsl.pipex.com>
* i386nbsd-tdep.c: Include "trad-frame.h" and "tramp-frame.h"
(sigtramp_retcode, i386nbsd_sigtramp_offset, i386nbsd_sigtramp_p):
Remove
(i386nbsd_mc_reg_offset): New array.
(i386nbsd_sigtramp_cache_init): New function.
(i386nbsd_sigtramp_sc16, i386nbsd_sigtramp_sc2, i386nbsd_sigtramp_si2)
(i386nbsd_sigtramp_si31, i386nbsd_sigtramp_si4): New signal trampoline
frame descriptions.
(i386nbsd_init_abi): Override ABI sigcontext defaults and register
new signal frame unwinders
* Makefile.in (i386nbsd-tdep.o): Update dependencies.
* tramp-frame.h (struct tramp_frame): Allow for 48 instructions
2007-12-29 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (_initialize_ada_language): Attach executable_changed
observer.
2007-12-28 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_evaluate_subexp): Break two large expressions
using temporary variables.
2007-12-27 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_value_cast): New function, extracted out from
the code in ada_evaluate_subexp, case UNOP_CAST. The code handling
the obscure case has been removed as we think that it is actually
unnecessary.
(ada_evaluate_subexp): Add type case when evaluating an OP_DOUBLE
or an OP_LONG with a non-null expect_type. Replace extracted-out
code with call to new ada_value_cast function.
2007-12-27 Paul Hilfinger <hilfinger@adacore.com>
* ada-lang.c (ada_evaluate_subexp): Add cases for BINOP_LOGICAL_AND,
BINOP_LOGICAL_OR, UNOP_LOGICAL_NOT, BINOP_BITWISE_IOR,
BINOP_BITWISE_XOR, BINOP_BITWISE_AND.
* language.c (lang_bool_type): Add Ada case.
2007-12-26 Joel Brobecker <brobecker@adacore.com>
* dwarf2read.c (read_base_type): Fix obvious &&/|| confusion.
2007-12-26 Luis Machado <luisgpm@br.ibm.com>
* dwarf2-frame.c (execute_cfa_program): Call dwarf2_restore_rule
function to handle required actions for the DW_CFA_restore and
DW_CFA_restore_extended instructions.
(dwarf2_restore_rule): New function.
2007-12-24 Joel Brobecker <brobecker@adacore.com>
* ada-lang.c (ada_is_character_type): Add recognition of type
"Wide_Wide_Character".
2007-12-24 Joel Brobecker <brobecker@adacore.com>
* dwarf2read.c (read_base_type): Set code to TYPE_CODE_CHAR
for char and unsigned char types of Ada compilation units.
* ada-lang.c (ada_is_character_type): Always return true if
the type code is TYPE_CODE_CHAR.
2007-12-23 Joel Brobecker <brobecker@adacore.com>
* infrun.c (handle_inferior_event): Remove code that made us
stop when stepping into the last line of the current function.
2007-12-22 Pierre Muller <muller@ics.u-strasbg.fr>
* win32-nat.c: Fix PR gdb/2388.
(do_win32_fetch_inferior_registers): Do not overwrite debug register
array dr if debug_registers_changed variable is set.
2007-12-22 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (scan_partial_symbols partial_die_parent_scope)
(add_partial_symbol, pdi_needs_namespace, process_die)
(is_type_tag_for_partial, load_partial_dies, new_symbol)
(read_type_die, determine_prefix): Extend the current code of
`DW_TAG_class_type' also for `DW_TAG_interface_type'.
2007-12-21 Paul N. Hilfinger <hilfinger@adacore.com>
* ada-lang.h (ada_renaming_category): New enumerated type.
(ada_lookup_encoded_symbol): Declare.
(ada_parse_renaming): Declare.
(ada_renaming_type,ada_is_object_renaming)
(ada_simple_renamed_entity): Delete declarations.
* ada-lang.c (ada_parse_renaming): New function to concentrate
extraction of information from renaming symbols.
(parse_old_style_renaming): New function to concentrate
extraction of old-style (purely type-based) renaming information.
(renaming_is_visible): Rename to...
(old_renaming_is_invisible): Rename and change sense of
renaming_is_visible.
(remove_out_of_scope_renamings): Rename to...
(remove_irrelevant_renamings): Renames remove_out_of_scope_renamings
and augments with additional logic to handle cases where the same
object renaming is encoded both as a reference variable and an
encoded renaming.
(ada_renaming_type,ada_is_object_renaming)
(ada_simple_renamed_entity): Delete definitions.
(ada_lookup_encoded_symbol): New function factored out of
ada_lookup_symbol.
(ada_lookup_symbol): Reimplement to call ada_lookup_encoded_symbol.
(wild_match): Don't reject perfect match of prefix.
(ada_find_renaming_symbol): Factor old-style renaming logic into
find_old_style_renaming_symbol.
(find_old_style_renaming_symbol): New name for content of old
ada_find_renaming_symbol.
(ada_prefer_type): Reimplement not to use ada_renaming_type.
* ada-exp.y (write_object_renaming): Change interface. Reimplement
to use new arguments and ada_parse_renaming.
Correct blocks used to find array index.
(write_var_or_type): Reimplement to use ada_parse_renaming.
2007-12-21 Denis Pilat <denis.pilat@st.com>
* tui/tui-data.h (MAX_LOCATOR_ELEMENT_LEN): Defined to a bigger
value or to PATH_MAX when possible.
2007-12-20 Joel Brobecker <brobecker@adacore.com>
* rs6000-tdep.h: Remove defs.h #include.
* Makefile.in (rs6000_tdep_h): Update dependencies.
2007-12-20 Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdbtypes.c (gdbtypes_post_init): Change names of decimal float types
to conform to C extension for decimal float.
* c-lang.c (enum c_primitive_types): Add entries for Decimal Floating
Point types.
(enum cplus_primitive_types): Likewise.
(c_language_arch_info): Add Decimal Floating Point builtin types to
the primitive_type_vector.
(cplus_language_arch_info): Likewise.
2007-12-20 David Ung <davidu@mips.com>
Maciej W. Rozycki <macro@mips.com>
* mips-tdep.c (mips_n32n64_push_dummy_call): Sign-extend
integers and 32-bit pointers as required by the ABI.
2007-12-20 Joel Brobecker <brobecker@adacore.com>
* symtab.h: Remove "defs.h" #include.
* Makefile.in (symtab_h): Update dependencies.
2007-12-19 Joel Brobecker <brobecker@adacore.com>
* symtab.h: #include "defs.h".
(enum language): Remove opaque declaration.
* Makefile.in (symtab_h): Update dependencies.
2007-12-19 Joel Brobecker <brobecker@adacore.com>
* language.h (enum exp_opcode): Remove commented out forward
declaration.
(op_error): Delete declaration.
2007-12-19 Joel Brobecker <brobecker@adacore.com>
* infrun.c (handle_inferior_event): Fix spelling in comment.
2007-12-18 Daniel Jacobowitz <dan@codesourcery.com>
* minsyms.c (lookup_minimal_symbol): Also check the separate
debug objfile.
(lookup_minimal_symbol_text): Likewise.
(lookup_minimal_symbol_solib_trampoline): Likewise.
* symtab.c (lookup_global_symbol_from_objfile): Likewise.
2007-12-18 Vladimir Prus <vladimir@codesourcery.com>
* mi/mi-main.c (mi_cmd_list_features): Announce
the 'pending-breakpoints' feature.
2007-12-17 Jim Blandy <jimb@codesourcery.com>
* dwarf2read.c (dwarf2_add_field): Correctly scale all byte
offsets obtained from DW_AT_data_member_location before recording
them in FIELD_BITPOS (*fp).
* dwarf2read.c (attr_form_is_section_offset): Doc fixes.
2007-12-17 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* utils.c (string_to_core_addr): If the executable format
indicates that addresses should be sign-extended and there are
only 8 hex digits in the address, then do so.
* Makefile.in (utils.o): Depend on $(gdbcore_h).
2007-12-17 Chris Dearman <chris@mips.com>
* symfile.c (init_filename_language_table): Recognise .sx as
an assembler file.
2007-12-17 Joel Brobecker <brobecker@adacore.com>
* language.h (enum exp_opcode): Comment out this declaration,
undoing the previous change.
2007-12-17 Luis Machado <luisgpm@br.ibm.com>
* breakpoint.c: (watch_command_1): Parse additional optional
"thread" parameter to the watchpoint command and set the
"thread" member of the breakpoint struct.
2007-12-17 Luis Machado <luisgpm@br.ibm.com>
* breakpoint.c (bpstat_stop_status): Check an additional
condition before evaluating an expression value.
2007-12-17 Joel Brobecker <brobecker@adacore.com>
* language.h (enum exp_opcode): Add forward declaration.
(language_string_char_type, language_lookup_primitive_type_by_name):
Move declaration past declaration of language_defn.
2007-12-16 Daniel Jacobowitz <dan@codesourcery.com>
Joseph Myers <joseph@codesourcery.com>
* configure.ac: Check for *-*-solaris2.1[[0-9]]* instead of
*-*-solaris2.1[[0-9]].
* configure: Regenerate.
* procfs.c (proc_set_current_signal): If redelivering a signal,
reuse the current siginfo if possible.
2007-12-16 Francois-Xavier Coudert <fxcoudert@gcc.gnu.org>
* f-typeprint.c (print_equivalent_f77_float_type): Remove function.
(f_type_print_base): Output the type names directly for real and
complex types.
2007-12-16 Vladimir Prus <vladimir@codesourcery.com>
* breakpoint.c (bpstat_have_active_hw_watchpoints):
Remove
(bpstat_stop_status): Remove unused variable
real_breakpoint.
* breakpoint.h (bpstat_have_active_hw_watchpoints):
Remove prototype.
2007-12-16 Vladimir Prus <vladimir@codesourcery.com>
* target.h (target_pid_or_tid_to_str): Remove.
* infrun.c (handle_inferior_event):
Use target_pid_to_str instead of
target_pid_or_tid_to_str.
(normal_stop): Likewise.
2007-12-16 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (dwarf_attr_name): Rename `DW_AT_stride_size' to its
DWARF3 equivalent `DW_AT_bit_stride'.
Rename `DW_AT_stride' to its DWARF3 equivalent `DW_AT_byte_stride'.
2007-12-16 Joel Brobecker <brobecker@adacore.com>
* mi/mi-main.c: Remove code that was commented out in 1999.
2007-12-16 Joel Brobecker <brobecker@adacore.com>
* expression.h (parse_expression_in_context): Delete prototype.
* parse.c (parse_expression_in_context): Delete.
2007-12-14 Vladimir Prus <vladimir@codesourcery.com>
Add support for pending breakpoints in MI.
* gdb.h (gdb_breakpoint): Add parameter pending.
* breakpoint.c (gdb_breakpoint): Add parameter pending.
* mi/mi-cmd-break.c (mi_break_insert): Change
comment to refer to manual. Add support for
the -f flag, for pending breakpoint.
2007-12-14 Vladimir Prus <vladimir@codesourcery.com>
* breakpoint.c (break_command_really): New, copied
from break_command_1. New parameters COND_STRING, THREAD
PARSE_CONDITITION_AND_THREAD and PENDING_BREAK_SUPPORT.
The previous FLAG parameter split into TEMPFLAG and
HARDWAREFLAG.
When PARSE_CONDITION_AND_THREAD is not set, duplicate
the passed condition string.
(struct captured_breakpoint_args): Remove
(do_captured_breakpoint): Remove.
(break_command_1): Relay to break_command_really.
(gdb_breakpoint): Relay to break_command_really.
2007-12-13 Michael Snyder <msnyder@specifix.com>
* mips-linux-tdep.c (mips64_fill_gregset): Remove unused variable.
2007-12-13 Jim Blandy <jimb@codesourcery.com>
* dwarf2read.c (attr_form_is_constant): New function.
(dwarf2_add_field): Use it and attr_form_is_section_offset to
recognize DW_AT_data_member_location attributes. Use
dwarf2_get_attr_constant_value when the attribute is a constant.
* dwarf2read.c (attr_form_is_section_offset): New function.
(dwarf_add_member_fn, read_common_block, read_partial_die)
(dwarf2_symbol_mark_computed): Use it, instead of writing it out.
2007-12-12 Jim Blandy <jimb@codesourcery.com>
Remove unused support for target-based exception catching.
* target.h (struct target_ops): Delete
to_enable_exception_callback and to_get_current_exception_event
members.
(target_enable_exception_callback)
(target_get_current_exception_event): Delete macros.
* target.c (update_current_target): Remove code to inherit and
default those members.
(debug_to_enable_exception_callback)
(debug_to_get_current_exception_event): Delete functions.
(setup_target_debug): Don't install those methods.
* inf-child.c (inf_child_enable_exception_callback)
(inf_child_get_current_exception_event): Delete dummy functions.
(inf_child_target): Don't install them in the target vector.
* breakpoint.h (enum bptype): Delete bp_catch_catch,
bp_catch_throw.
* breakpoint.c (cover_target_enable_exception_callback)
(ep_is_exception_catchpoint, create_exception_catchpoint): Delete
functions.
(insert_bp_location, update_breakpoints_after_exec)
(remove_breakpoint, ep_is_catchpoint, print_it_typical)
(bpstat_stop_status, bpstat_what)
(bpstat_get_triggered_catchpoints, print_one_breakpoint_location)
(user_settable_breakpoint, allocate_bp_location)
(disable_watchpoints_before_interactive_call_start)
(enable_watchpoints_after_interactive_call_stop, mention)
(delete_breakpoint, breakpoint_re_set_one, disable_command)
(enable_command): Remove exception catchpoint cases.
(catch_exception_command_1): Don't try target-based exception
handling.
* stack.c (catch_info): Call print_frame_label_vars
unconditionally.
2007-12-12 Nigel Stephens <nigel@mips.com>
Maciej W. Rozycki <macro@mips.com>
* remote-mips.c (mips_load): Use regcache_set_valid_p() instead
of setting deprecated_register_valid array directly.
2007-12-07 Maciej W. Rozycki <macro@mips.com>
* mips-tdep.c (extended_offset): Fix a comment.
2007-12-07 Maciej W. Rozycki <macro@mips.com>
* target.c (update_current_target): Inherit to_log_command.
* target.h (struct target_ops). Add to_log_command.
(target_log_command): New macro.
* top.c (execute_command): Call target_log_command() rather than
serial_log_command().
* monitor.c (init_base_monitor_ops): Initialize to_log_command.
* remote-m32r-sdi.c (init_m32r_ops): Likewise.
* remote-mips.c (_initialize_remote_mips): Likewise.
* remote.c (init_remote_ops): Likewise.
2007-12-06 Daniel Jacobowitz <dan@codesourcery.com>
* infrun.c (init_wait_for_inferior): Reset target_last_wait_ptid.
(handle_inferior_event): Clear stop_stack_dummy earlier.
2007-12-06 Jim Blandy <jimb@codesourcery.com>
* addrmap.c (addrmap_splay_tree_remove): New function.
(addrmap_mutable_set_empty): Use it.
* addrmap.c, addrmap.h: Update to GPLv3.
* addrmap.c (struct addrmap): Make the referenced function table
const.
(addrmap_fixed_funcs, addrmap_mutable_funcs): Declare const.
Don't use designated initializers.
* addrmap.c (addrmap_fixed_create_fixed, addrmap_mutable_find)
(addrmap_mutable_relocate): Use internal_error, not abort.
* NEWS: Mention support for non-contiguous lexical blocks and
function bodies.
2007-12-06 Markus Deuling <deuling@de.ibm.com>
* gdbarch.sh (stab_reg_to_regnum, dwarf_reg_to_regnum)
( dwarf2_reg_to_regnum, sdb_reg_to_regnum, ecoff_reg_to_regnum): Add
gdbarch as parameter.
* gdbarch.{c,h}: Regenerate.
* xtensa-tdep.c (xtensa_reg_to_regnum): Add gdbarch as parameter.
Replace current_gdbarch by gdbarch.
* s390-tdep.c (s390_dwarf_reg_to_regnum): Likewise.
* rs6000-tdep.c (rs6000_stab_reg_to_regnum)
(rs6000_dwarf2_reg_to_regnum): Likewise.
* mips-tdep.c (mips_stab_reg_to_regnum)
(mips_dwarf_dwarf2_ecoff_reg_to_regnum): Likewise.
* mep-tdep.c (mep_debug_reg_to_regnum): Likewise.
* m32c-tdep.c (m32c_debug_info_reg_to_regnum): Likewise.
* i386-tdep.c (i386_dbx_reg_to_regnum)
(i386_svr4_reg_to_regnum): Likewise
* h8300-tdep.c (h8300s_dbg_reg_to_regnum)
(h8300_dbg_reg_to_regnum): Likewise.
* amd64-tdep.c (amd64_dwarf_reg_to_regnum): Likewise.
* arch-utils.c (no_op_reg_to_regnum): Likewise.
* arch-utils.h (no_op_reg_to_regnum): Likewise.
* arm-tdep.c (arm_dwarf_reg_to_regnum): Likewise.
* cris-tdep.c (cris_dwarf2_reg_to_regnum): Likewise.
* hppa-tdep.c (hppa64_dwarf_reg_to_regnum): Likewise.
* ia64-tdep.c (ia64_dwarf_reg_to_regnum): Likewise.
* m68k-tdep.c (m68k_dwarf_reg_to_regnum): Likewise.
2007-12-06 Vladimir Prus <vladimir@codesourcery.com>
Localize infrun use of remove_breakpoints.
* infrun.c (handle_inferior_event): Remove
calls to remove_breakpoints, except where needed to
communicate change of breakpoint locations to inferior.
(keep_going): If steppping over breakpoint, remove
breakpoints.
2007-12-06 Vladimir Prus <vladimir@codesourcery.com>
Clarify infrun variable naming.
* infrun.c (trap_expected): Rename
to stepping_over_breakpoint. Document.
(stepping_past_breakpoint): Remove.
(stepping_past_breakpoint_ptdi): Renamed
to deferred_step_ptid.
(struct execution_control_state): Rename
the another_trap field to stepping_over_breakpoint.
(struct inferior_status): Rename the trap_expected
field to stepping_over_breakpoint.
(clear_proceed_status, proceed)
(init_execution_control_state, context_switch)
(handle_inferior_event, currently_stepping)
(keep_going, save_inferior_status)
(restore_inferior_status, prepare_to_proceed): Adjust.
* gdbthread.h (struct thread_info): Rename the
trap_expected field to stepping_over_breakpoint.
* thread.c (load_infrun_state, save_infrun_state):
Adjust.
2007-12-06 Pierre Muller <muller@ics.u-strasbg.fr>
* win32-nat.c: Allow compilation if CORE_ADDR is 8 byte long.
Add "gdb_stdint.h" dependency required for uintptr_t type use.
(handle_output_debug_string): Use uintptr_t typecast.
(handle_exception): Ditto.
(win32_xfer_memory): Ditto.
* Makefile.in (win32-nat.o): Add dependency to gdb_stdint header.
2007-12-04 Jim Blandy <jimb@codesourcery.com>
Support lexical blocks and function bodies that occupy
non-contiguous address ranges.
* addrmap.c, addrmap.h: New files.
* block.h (struct addrmap): New forward declaration.
(struct blockvector): New member, 'map'.
(BLOCKVECTOR_MAP): New accessor macro.
* block.c: #include "addrmap.h"
(blockvector_for_pc_sect): If the blockvector we've found has
an address map, use it instead of searching the blocks.
* buildsym.c: #include "addrmap.h"
(pending_addrmap_obstack, pending_addrmap_interesting): New static
variables.
(really_free_pendings): If we have a pending addrmap, free it too.
(record_block_range): New function.
(make_blockvector): If we have an interesting pending addrmap,
record it in the new blockvector.
(start_symtab, buildsym_init): Assert that there is no pending
addrmap now; we should have cleaned up any addrmaps we'd built
previously.
(end_symtab): If there is a pending addrmap left over that didn't
get included in the blockvector, free it.
* buildsym.h (struct addrmap): New forward declaration.
(record_block_range): New prototype.
* objfiles.c: #include "addrmap.h".
(objfile_relocate): Relocate the blockvector's address map, if
present.
* dwarf2read.c (dwarf2_record_block_ranges): New function.
(read_func_scope, read_lexical_block_scope): Call it.
* Makefile.in (SFILES): Add addrmap.c.
(addrmap_h): New header dependency variable.
(COMMON_OBS): Add addrmap.o.
(addrmap.o): New rule.l
(block.o, objfiles.o, buildsym.o): Depend on $(addrmap_h).
* block.c (blockvector_for_pc, blockvector_for_pc_sect): Return a
pointer to the block, not its index in the blockvector.
(block_for_pc_sect): Use the returned block, instead of looking it
up ourselves.
* block.h (blockvector_for_pc, blockvector_for_pc_sect): Update
declarations.
* breakpoint.c (resolve_sal_pc): Use returned block, instead of
looking it up ourselves.
* stack.c (print_frame_label_vars): Disable function, which
depends on the block's index.
* buildsym.c (finish_block): Return the block we've built.
* buildsym.h (finish_block): Update prototype.
* defs.h (CORE_ADDR_MAX): New constant.
2007-12-04 Ulrich Weigand <uweigand@de.ibm.com>
* coffread.c (decode_type): Use builtin_type_int32 instead
of FT_INTEGER fundamental type for array range index type.
(decode_base_type): Use builtin types of current_gdbarch
instead of fundamental types.
* dwarf2read.c (struct dwarf2_cu): Remove ftypes member.
(read_file_scope): Do not initialize ftypes member.
(dwarf_base_type, dwarf2_fundamental_types): Remove functions.
(read_array_type): Use builtin_type_int32 instead of FT_INTEGER
fundamental type for array range index type.
(read_tag_string_type): Likewise for string range index type.
Also, do not overwrite FT_CHAR type with new string type.
(read_base_type): If DW_AT_name is missing, create unnamed type
with given properties instead of looking for a fundamental type.
Create new types as TYPE_TARGET_TYPE for DW_ATE_address and
DW_ATE_complex_float types.
(read_subrange_type): Create new type to represent missing
DW_AT_type instead of looking for a fundamental type.
(die_type): Use builtin type to represent "void" instead of
looking for a fundamental type.
* stabsread.c (define_symbol): Use builtin types to represent
'r' and 'i' floating-point and integer constants.
* gdbtypes.c (lookup_fundamental_type): Remove.
* gdbtypes.h (lookup_fundamental_type): Remove prototype.
(FT_VOID, FT_BOOLEAN, FT_CHAR, FT_SIGNED_CHAR, FT_UNSIGNED_CHAR,
FT_SHORT, FT_SIGNED_SHORT, FT_UNSIGNED_SHORT, FT_INTEGER,
FT_SIGNED_INTEGER, FT_UNSIGNED_INTEGER, FT_LONG, FT_SIGNED_LONG,
FT_UNSIGNED_LONG, FT_LONG_LONG, FT_SIGNED_LONG_LONG,
FT_UNSIGNED_LONG_LONG, FT_FLOAT, FT_DBL_PREC_FLOAT, FT_EXT_PREC_FLOAT,
FT_COMPLEX, FT_DBL_PREC_COMPLEX, FT_EXT_PREC_COMPLEX, FT_STRING,
FT_FIXED_DECIMAL, FT_FLOAT_DECIMAL, FT_BYTE, FT_UNSIGNED_BYTE,
FT_TEMPLATE_ARG, FT_DECFLOAT, FT_DBL_PREC_DECFLOAT,
FT_EXT_PREC_DECFLOAT, FT_NUM_MEMBERS): Remove macros.
* objfiles.c (struct objfile): Remove fundamental_types member.
* symfile.c (reread_symbols): Do not clear fundamental_types.
* language.h (struct language_defn): Remove la_fund_type member.
(create_fundamental_type): Remove.
* language.c (unk_lang_create_fundamental_type): Remove.
(unknown_language_defn, auto_language_defn,
local_language_defn): Adapt initializer.
* ada-lang.c (ada_create_fundamental_type): Remove.
(ada_language_defn): Adapt initializer.
* c-lang.h (c_create_fundamental_type): Remove prototype.
* c-lang.c (c_create_fundamental_type): Remove.
(c_language_defn, cplus_language_defn, asm_language_defn,
minimal_language_defn): Adapt initializer.
* f-lang.c (f_create_fundamental_type): Remove.
(f_language_defn): Adapt initializer.
* jv-lang.c (java_create_fundamental_type): Remove.
(java_language_defn): Adapt initializer.
* m2-lang.c (m2_create_fundamental_type): Remove.
(m2_language_defn): Adapt initializer.
* objc-lang.c (objc_create_fundamental_type): Remove.
(objc_language_defn): Adapt initializer.
* p-lang.h (pascal_create_fundamental_type): Remove prototype.
* p-lang.c (pascal_create_fundamental_type): Remove.
(pascal_language_defn): Adapt initializer.
* scm-lang.c (scm_language_defn): Adapt initializer.
2007-12-04 Maciej W. Rozycki <macro@mips.com>
* features/mips-cpu.xml: Specify "regnum" for "r0" explicitly.
* features/mips64-cpu.xml: Likewise.
* features/mips-fpu.xml: Specify "regnum" for "f0" explicitly.
* features/mips64-fpu.xml: Likewise.
* features/mips-linux.c: Regenerate.
* features/mips64-linux.c: Regenerate.
2007-12-04 Maciej W. Rozycki <macro@mips.com>
* target.h (target_find_new_threads): Fix definition.
2007-12-02 Pierre Muller <muller@ics.u-strasbg.fr>
* win32-nat.c (win32_resume): Set the trace bit
in the thread identified by inferior_ptid.
2007-12-02 Pierre Muller <muller@ics.u-strasbg.fr>
* win32-nat.c (open_process_used): New static variable.
(win32_init_thread_list): Remove call to CloseHandle for thread.
(win32_delete_thread): Ditto.
(fake_create_process): Set open_process_used if OpenProcess call is
successful.
(get_win32_debug_event): Do not close process handle.
(do_initial_win32_stuff): Set open_process_used to zero.
(win32_mourn_inferior): Call CloseHandle for current_process_handle if
open_process_used is set.
(win32_kill_inferior): Do not close process and main_thread handles.
2007-11-30 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (remote_cmdlist): New variable.
(PACKET_vFile_open, PACKET_vFile_pread, PACKET_vFile_pwrite)
(PACKET_vFile_close, PACKET_vFile_unlink): New constants.
(remote_buffer_add_string, remote_buffer_add_bytes)
(remote_buffer_add_int, remote_hostio_parse_result)
(remote_hostio_send_command, remote_hostio_open, remote_hostio_pwrite)
(remote_hostio_pread, remote_hostio_close, remote_hostio_unlink)
(remote_fileio_errno_to_host, remote_hostio_error, fclose_cleanup)
(remote_hostio_close_cleanup, remote_file_put, remote_file_get)
(remote_file_delete, remote_put_command, remote_get_command)
(remote_delete_command, remote_command): New functions.
(_initialize_remote): Register new packets and commands.
* Makefile.in (gdb_fileio_h): New variable.
(remote.o): Update.
(SUBDIR_MI_OBS): Add mi-cmd-target.o.
(SUBDIR_MI_SRCS): Add mi/mi-cmd-target.c.
(mi-cmd-target.o): New rule.
* mi/mi-cmd-target.c: New file.
* mi/mi-cmds.c (mi_cmds): Add target-file-delete, target-file-get,
and target-file-put.
* mi/mi-cmds.h (mi_cmd_target_file_get, mi_cmd_target_file_put)
(mi_cmd_target_file_delete): Declare.
* remote.h (remote_file_put, remote_file_get, remote_file_delete):
Declare.
* NEWS: Describe new file transfer support.
2007-11-30 Vladimir Prus <vladimir@codesourcery.com>
* infrun.c (handle_inferior_event): Don't
ignore beakpoints if trap_expected is set.
2007-11-30 Vladimir Prus <vladimir@codesourcery.com>
Make insert_breakpoints return void.
* breakpoint.h (insert_breakpoints): Change
return type to void.
* breakpoint.c (insert_breakpoints): Change
return type to void. Rename local return_val
variable to error.
* infrun.c (keep_going): Instead of checking
return value from insert_breakpoints, catch exception.
2007-11-29 Vladimir Prus <vladimir@codesourcery.com>
Stop infrun from tracking breakpoint insertion status.
The checks of breakpoints_inserted before calling
remove_breakpoints are removed, as remove_breakpoint
won't touch uninserted breakpoints. In a number of places,
we're interested if a breakpoint is inserted at particular
PC, and we now use breakpoint_inserted_here_p. In a few
places, insert_breakpoints can be called unconditionally,
since it won't try to insert already inserted breakpoint.
* breakpoint.h (regular_breakpoint_inserted_here_p): New
declaration.
* breakpoint.c (regular_breakpoint_inserted_here_p): New.
(breakpoint_inserted_here_p): Use
regular_breakpoint_inserted_here_p.
* infrun.c (breakpoints_inserted): Remove.
(resume): Don't check for breakpoints_inserted before
remove_hw_watchpoints. Use breakpoint_inserted_here_p.
(proceed, init_wait_for_inferior): Don't set breakpoints_inserted.
(handle_inferior_event): Don't use breakpoints_inserted.
Use breakpoints_meant_to_be_inserted and
breakpoints_inserted_here_p.
(insert_step_resume_breakpoint_at_sal, keep_going): Use
breakpoints_meant_to_be_inserted. Don't set breakpoints_inserted.
(normal_stop): Don't check for breakpoints_inserted. Don't
set breakpoints_inserted.
(keep_going): Don't check for breakpoints_inserted.
(insert_step_resume_breakpoint_at_sal): Don't insert
breakpoints
2007-11-28 Jim Blandy <jimb@codesourcery.com>
* breakpoint.c (watch_command_1): When the watchpoint isn't local
to any frame, initialize watchpoint_frame using null_frame_id, not
a memset.
2007-11-28 Vladimir Prus <vladimir@codesourcery.com>
* infrun.c (resume): Set right thread even if
stepping over breakpoint using software single step.
2007-11-28 Nick Roberts <nickrob@snap.net.nz>
* mi/mi-cmd-var.c (print_varobj): Revert change from 2007-08-31.
(mi_print_value_p): Guard against type = NULL.
2007-11-27 Thiago Jung Bauermann <bauerman@br.ibm.com>
* dfp.c (decimal_from_string): Remove superfluous newline from
error string.
(decimal_to_string): Likewise.
* printcmd.c (printf_command): Change string buffer to use
MAX_DECIMAL_STRING constant.
* value.c (value_from_decfloat): Likewise.
2007-11-27 Ulrich Weigand <uweigand@de.ibm.com>
* Makefile.in (ALL_TARGET_OBS): Remove object files that require
64-bit CORE_ADDR and BFD support, move them to ...
(ALL_64_TARGET_OBS): ... this new variable.
* configure.ac: Check for --enable-64-bit-bfd option. Only add
64-bit targets with --enable-targets=all if BFD supports 64-bit.
* configure: Regenerate.
* i386-cygwin-tdep.c (i386_cygwin_osabi_sniffer): Do not claim
all elf32-i386 executables, only cygwin core files.
2007-11-25 Jan Kratochvil <jan.kratochvil@redhat.com>
* dwarf2read.c (dwarf2_get_pc_bounds): Moved the `DW_AT_ranges' parsing
code with its variables OBJFILE, CU_HEADER and OBFD into ...
(dwarf2_ranges_read): ... a new function.
(read_partial_die): Implemented the parsing of `DW_AT_ranges'.
2007-11-24 Pedro Alves <pedro_alves@portugalmail.pt>
* win32-nat.c (DR6_CLEAR_VALUE): New define.
(thread_info_struct): Rename suspend_count to suspended, to be
used as a flag.
(thread_rec): Only suspend the thread if it wasn't suspended by
gdb before. Warn if suspending failed.
(win32_add_thread): Set Dr6 to DR6_CLEAR_VALUE.
(win32_continue): Set Dr6 to DR6_CLEAR_VALUE. Update usage of the
`suspended' flag. Do ContinueDebugEvent after resuming the
suspended threads, not before. Set threads' contexts before
resuming them, not after.
(win32_resume): Set Dr6 to DR6_CLEAR_VALUE.
2007-11-23 Vladimir Prus <vladimir@codesourcery.com>
* breakpoint.c (insert_breakpoints)
(insert_bp_location): Remove stale comments.
2007-11-23 Maciej W. Rozycki <macro@mips.com>
* mips-linux-tdep.h: Fix some formatting.
2007-11-21 Markus Deuling <deuling@de.ibm.com>
* stack.c (print_args_stub): Use get_frame_arch to get at the current
architecture and replace current_gdbarch.
(frame_info): Likewise.
2007-11-21 Nick Roberts <nickrob@snap.net.nz>
* varobj.c (c_variable_editable, cplus_variable_editable)
(java_variable_editable, variable_editable): Delete.
(varobj_editable_p): Replace above functions with one language
independent function. Check for an lvalue.
(varobj_get_attributes, varobj_set_value): Use varobj_editable_p.
(struct language_specific): Delete variable_editable field.
* mi-cmd-var.c (mi_cmd_var_assign): Simplify.
* varobj.h: Add extern for varobj_editable_p.
2007-11-20 Vladimir Prus <vladimir@codesourcery.com>
Remove unused breakpoint fields.
* breakpoint.h (struct breakpoint): Remove
from_tty and flag fields.
* breakpoint.c (break_command_1): Don't set
from_tty and flag field set of breakpoint.
(create_ada_exception_breakpoint): Don't set
the from_tty field.
2007-11-20 David Ung <davidu@mips.com>
Maciej W. Rozycki <macro@mips.com>
* mips-tdep.c (mips16_scan_prologue): Handle the MIPS16e SAVE
instruction.
2007-11-20 Vladimir Prus <vladimir@codesourcery.com>
* infrun.c (resume): Clarify logic that
decides if a single thread must be resumed. Add
comments.
2007-11-20 Vladimir Prus <vladimir@codesourcery.com>
* breakpoint.c (disable_breakpoints_in_unloaded_shlib):
Make static.
2007-11-19 Markus Deuling <deuling@de.ibm.com>
* gdbarch.sh (register_sim_regno): Add gdbarch as parameter.
* gdbarch.{c,h}: Regenerate.
* arch-utils.h (legacy_register_sim_regno): Add gdbarch as parameter.
* score-tdep.c (score_register_sim_regno): Likewise.
* sim-regno.h (one2one_register_sim_regno): Likewise.
* arch-utils.c (legacy_register_sim_regno): Add gdbarch as parameter.
Replace current_gdbarch by gdbarch.
* sh-tdep.c (sh_sh2a_register_sim_regno)
(sh_dsp_register_sim_regno): Likewise.
* rs6000-tdep.c (rs6000_register_sim_regno): Likewise.
* mips-tdep.c (mips_register_sim_regno): Likewise.
* m32c-tdep.c (m32c_register_sim_regno): Likewise.
* frv-tdep.c (frv_register_sim_regno): Likewise.
* arm-tdep.c (arm_register_sim_regno): Likewise.
* remote-sim.c (one2one_register_sim_regno): Likewise.
2007-11-16 Ulrich Weigand <uweigand@de.ibm.com>
* configure.ac (--enable-targets): New configure option.
Collect gdb_target_obs of multiple targets into TARGET_OBS.
Call configure.tgt multiple times, using $targ as operand.
* configure.tgt: Operate on $targ instead of $target.
* configure: Regenerate.
* Makefile.in (ALL_TARGET_OBS): Define.
* NEWS: Mention --enable-targets option.
2007-11-16 Ulrich Weigand <uweigand@de.ibm.com>
* mips-tdep.c (show_mipsfpu_command): Do not crash if called when
current architecture is not MIPS.
2007-11-16 Ulrich Weigand <uweigand@de.ibm.com>
* cli/cli-setshow.c (do_setshow_command): Use dynamically sized buffer
to construct error message if no argument was supplied.
2007-11-16 Ulrich Weigand <uweigand@de.ibm.com>
* i386nbsd-tdep.c (i386nbsd_aout_supply_regset): Remove.
(i386nbsd_aout_regset_from_core_section): Likewise.
(i386nbsd_aout_init_abi): Likewise.
(_initialize_i386nbsd_tdep): Do not register i386nbsd_aout_init_abi.
* vaxnbsd-tdep.c (vaxnbsd_aout_init_abi): Remove.
(_initialize_vaxnbsd_tdep): Do not register vaxnbsd_aout_init_abi.
2007-11-16 Ulrich Weigand <uweigand@de.ibm.com>
* amd64fsdb-tdep.c (amd64fbsd_sigtramp_start_addr): Use ULL suffix.
(amd64fbsd_sigtramp_end_addr): Likewise.
* iq2000-tdep.c (iq2000_pointer_to_address): Fix argument type.
(iq2000_address_to_pointer): Likewise.
(iq2000_frame_prev_register): Likewise.
(iq2000_extract_return_value): Use regcache_cooked_read_unsigned
instead of regcache_cooked_read into CORE_ADDR variable.
(iq2000_return_value): Fix argument types.
* m32r-rom.c (m32r_load_section): Fix printf argument type.
(m32r_load): Likewise.
* m68kbsd-tdep.c: Include "gdbtypes.h".
* Makefile.in: Update dependencies.
* mn10300-tdep.c (mn10300_frame_unwind_cache): Fix aliasing violation.
* nto-tdep.c (LM_ADDR): Do not refer to no-longer-existing
lmo->l_addr_size element.
* remote-m32r-sdi.c (m32r_xfer_memory): Use paddr to print address.
(m32r_insert_breakpoint): Likewise.
(m32r_remove_breakpoint): Likewise.
(m32r_insert_watchpoint): Likewise.
(m32r_remove_watchpoint): Likewise.
(m32r_load): Fix printf argument type.
* xtensa-tdep.c (xtensa_regset_from_core_section): Fix printf
argument type.
(xtensa_frame_this_id): Do not cast pointers to "int" for output.
(xtensa_frame_prev_register): Likewise.
(xtensa_push_dummy_call): Likewise.
2007-11-16 Ulrich Weigand <uweigand@de.ibm.com>
* config/alpha/alpha-linux.mt: Remove file.
* config/alpha/alpha.mt: Remove file.
* config/alpha/alpha-osf1.mt: Remove file.
* config/alpha/fbsd.mt: Remove file.
* config/alpha/nbsd.mt: Remove file.
* config/alpha/obsd.mt: Remove file.
* config/arm/embed.mt: Remove file.
* config/arm/linux.mt: Remove file.
* config/arm/nbsd.mt: Remove file.
* config/arm/obsd.mt: Remove file.
* config/arm/wince.mt: Remove file.
* config/avr/avr.mt: Remove file.
* config/cris/cris.mt: Remove file.
* config/frv/frv.mt: Remove file.
* config/h8300/h8300.mt: Remove file.
* config/i386/cygwin.mt: Remove file.
* config/i386/fbsd64.mt: Remove file.
* config/i386/fbsd.mt: Remove file.
* config/i386/i386gnu.mt: Remove file.
* config/i386/i386.mt: Remove file.
* config/i386/i386sol2.mt: Remove file.
* config/i386/linux64.mt: Remove file.
* config/i386/linux.mt: Remove file.
* config/i386/mingw.mt: Remove file.
* config/i386/nbsd64.mt: Remove file.
* config/i386/nbsd.mt: Remove file.
* config/i386/nto.mt: Remove file.
* config/i386/obsd64.mt: Remove file.
* config/i386/obsd.mt: Remove file.
* config/i386/sol2-64.mt: Remove file.
* config/ia64/ia64.mt: Remove file.
* config/ia64/linux.mt: Remove file.
* config/iq2000/iq2000.mt: Remove file.
* config/m32c/m32c.mt: Remove file.
* config/m32r/linux.mt: Remove file.
* config/m32r/m32r.mt: Remove file.
* config/m68hc11/m68hc11.mt: Remove file.
* config/m68k/linux.mt: Remove file.
* config/m68k/monitor.mt: Remove file.
* config/m68k/nbsd.mt: Remove file.
* config/m68k/obsd.mt: Remove file.
* config/m88k/obsd.mt: Remove file.
* config/mep/mep.mt: Remove file.
* config/mips/embed.mt: Remove file.
* config/mips/irix5.mt: Remove file.
* config/mips/irix6.mt: Remove file.
* config/mips/linux.mt: Remove file.
* config/mips/nbsd.mt: Remove file.
* config/mips/obsd64.mt: Remove file.
* config/mn10300/linux.mt: Remove file.
* config/mn10300/mn10300.mt: Remove file.
* config/mt/mt.mt: Remove file.
* config/pa/hppahpux.mt: Remove file.
* config/pa/hppa.mt: Remove file.
* config/pa/linux.mt: Remove file.
* config/pa/obsd.mt: Remove file.
* config/powerpc/aix.mt: Remove file.
* config/powerpc/linux.mt: Remove file.
* config/powerpc/nbsd.mt: Remove file.
* config/powerpc/obsd.mt: Remove file.
* config/powerpc/ppc-eabi.mt: Remove file.
* config/s390/s390.mt: Remove file.
* config/score/embed.mt: Remove file.
* config/sh/embed.mt: Remove file.
* config/sh/linux.mt: Remove file.
* config/sh/nbsd.mt: Remove file.
* config/sh/obsd.mt: Remove file.
* config/sh/sh64.mt: Remove file.
* config/sparc/embed.mt: Remove file.
* config/sparc/fbsd.mt: Remove file.
* config/sparc/linux64.mt: Remove file.
* config/sparc/linux.mt: Remove file.
* config/sparc/nbsd64.mt: Remove file.
* config/sparc/nbsd.mt: Remove file.
* config/sparc/obsd64.mt: Remove file.
* config/sparc/obsd.mt: Remove file.
* config/sparc/sol2-64.mt: Remove file.
* config/sparc/sol2.mt: Remove file.
* config/sparc/sparc64.mt: Remove file.
* config/sparc/sparc.mt: Remove file.
* config/spu/spu.mt: Remove file.
* config/v850/v850.mt: Remove file.
* config/vax/nbsd.mt: Remove file.
* config/vax/obsd.mt: Remove file.
* config/vax/vax.mt: Remove file.
* config/xstormy16/xstormy16.mt: Remove file.
* config/xtensa/xtensa.mt: Remove file.
* configure.tgt (gdb_target_cpu): Remove. Do not set anywhere.
(gdb_target): Likewise.
(gdb_target_obs): Document. Set for every target to contents
of TDEPFILES in former .mt makefile fragment.
* configure.ac (TARGET_OBS): Define.
(target_makefile_frag, gdb_target_cpu): Do not define.
* configure: Regenerate.
* Makefile.in (MT_FLAGS): Remove.
(GLOBAL_CFLAGS): Update.
(TARGET_OBS): Substitute from configure.
(DEPFILES): Remove TDEPFILES, add TARGET_OBS.
(@target_makefile_frag@): Remove.
2007-11-16 Ulrich Weigand <uweigand@de.ibm.com>
* config/arm/embed.mt (SIM_OBS, SIM): Remove.
* config/avr/avr.mt (SIM_OBS, SIM): Remove.
* config/frv/frv.mt (SIM_OBS, SIM): Remove.
* config/h8300/h8300.mt (SIM_OBS, SIM): Remove.
* config/iq2000/iq2000.mt (SIM_OBS, SIM): Remove.
* config/m32c/m32c.mt (SIM_OBS, SIM): Remove.
* config/m32r/linux.mt (SIM_OBS, SIM): Remove.
* config/m32r/m32r.mt (SIM_OBS, SIM): Remove.
* config/m68hc11/m68hc11.mt (SIM_OBS, SIM): Remove.
* config/mips/embed.mt (SIM_OBS, SIM): Remove.
* config/mips/linux.mt (SIM_OBS, SIM): Remove.
* config/mips/nbsd.mt (SIM_OBS, SIM): Remove.
* config/mn10300/mn10300.mt (SIM_OBS, SIM): Remove.
* config/powerpc/linux.mt (SIM_OBS, SIM): Remove.
* config/powerpc/nbsd.mt (SIM_OBS, SIM): Remove.
* config/powerpc/ppc-sim.mt: Remove file.
* config/sh/embed.mt (SIM_OBS, SIM): Remove.
* config/sh/linux.mt (SIM_OBS, SIM): Remove.
* config/sh/nbsd.mt (SIM_OBS, SIM): Remove.
* config/sh/sh64.mt (SIM_OBS, SIM): Remove.
* config/sparc/embed.mt (SIM_OBS, SIM): Remove.
* config/v850/v850.mt (SIM_OBS, SIM): Remove.
* config/xstormy16/xstormy16.mt (SIM_OBS, SIM): Remove.
* configure.tgt (gdb_sim): Document variable.
(arm*-*-* | thumb*-*-* | strongarm*-*-* | xscale-*-*): Set it.
(avr-*-*): Likewise.
(frv-*-*): Likewise.
(h8300-*-*): Likewise.
(iq2000-*-*): Likewise.
(m32c-*-*): Likewise.
(m32r*-*-linux*): Likewise.
(m32r*-*-*): Likewise.
(m68hc11*-*-*|m6811*-*-*): Likewise.
(mips*-*-*): Likewise.
(mips*-*-linux*): Likewise.
(mips*-*-netbsd* | mips*-*-knetbsd*-gnu): Likewise.
(mn10300-*-*): Likewise.
(powerpc-*-linux* | powerpc64-*-linux*): Likewise.
(powerpc-*-netbsd* | powerpc-*-knetbsd*-gnu): Likewise.
(powerpc*-*-*): Use ppc-eabi target. Conditionally set gdb_sim.
(sh*): Set gdb_sim.
(sh-*-linux*): Likewise.
(sh*-*-netbsdelf* | sh*-*-knetbsd*-gnu): Likewise.
(sh64-*-elf*): Likewise.
(sparc-*-rtems*): Likewise.
(v850*-*-elf): Likewise.
(xstormy16-*-*): Likewise.
* configure.ac (IGNORE_SIM, IGNORE_SIM_OBS): Do not set.
(SIM, SIM_OBS): Set depending on ${ignore_sim} and ${gdb_sim}.
* configure: Regenerate.
* Makefile.in (SIM, SIM_OBS): Substitute from configure.
(@IGNORE_SIM@, @IGNORE_SIM_OBS@): Remove.
2007-11-16 Ulrich Weigand <uweigand@de.ibm.com>
* configure.tgt (gdb_osabi, build_gdbserver): Comment variables.
(arm*-*-*): Do not set obsolete build_rdi_share variable.
(*-*-freebsd* | *-*-kfreebsd*-gnu): Remove generic case, replace by ...
(alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
(i[34567]86-*-freebsd* | i[34567]86-*-kfreebsd*-gnu)
(sparc*-*-freebsd* | sparc*-*-kfreebsd*-gnu): ... specific cases.
(x86_64-*-freebsd* | x86_64-*-kfreebsd*-gnu): Re-sort.
(xscale-*-*): Merge into arm*-*-* case.
(fido-*-elf*): Merge into m68*-*-elf* case.
(m68*-*-aout*, m68*-*-coff*, m68*-*-elf*, m68*-*-rtems*,
m68*-*-uclinux*): Merge cases.
(powerpc-*-linux*, powerpc64-*-linux*): Merge cases.
(sh-*-coff*, sh-*-elf*): Merge into sh* case.
2007-11-16 Ulrich Weigand <uweigand@de.ibm.com>
* configure.tgt: Reformat main case statement.
2007-11-16 Ulrich Weigand <uweigand@de.ibm.com>
* configure.ac (hostfile, targetfile): Remove.
(GDB_XM_FILE, GDB_TM_FILE): Do not define.
(xm_h, tm_h): Likewise.
(DEPRECATED_TM_FILE, XM_FILE): Do not substitute into Makefile.
* configure, config.in: Regenerate.
* Makefile.in (xm_h, tm_h): Remove. Update dependencies.
(TAGS): Do not consider DEPRECATED_TM_FILE or XM_FILE.
(clean, local-maintainer-clean): Do not remove xm.h or tm.h.
* defs.h: Do not include "xm.h" or "tm.h".
* gdbarch.sh (verify_gdbarch): Do not dump GDB_XM_FILE or GDB_TM_FILE.
* gdbarch.c: Regenerate.
* config/score/embed.mt: Remove obsolete comment.
2007-11-16 Markus Deuling <deuling@de.ibm.com>
* gdbarch.sh (cannot_fetch_register, cannot_store_register): Add gdbarch
as parameter.
* gdbarch.{c,h}: Regenerate.
* alpha-tdep.c (alpha_cannot_fetch_register)
(alpha_cannot_store_register): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch.
* cris-tdep.c (cris_cannot_fetch_register, cris_cannot_store_register)
(crisv32_cannot_fetch_register)
(crisv32_cannot_store_register): Likewise.
* arch-utils.c (cannot_register_not): Likewise.
* arch-utils.h (cannot_register_not): Likewise.
* hppa-tdep.c (hppa32_cannot_store_register)
(hppa32_cannot_store_register, hppa64_cannot_store_register)
(hppa64_cannot_fetch_register): Likewise.
* mipsnbsd-tdep.c (mipsnbsd_cannot_fetch_register)
(mipsnbsd_cannot_store_register): Likewise.
2007-11-16 Markus Deuling <deuling@de.ibm.com>
* m32r-rom.c (m32r_supply_register): Use get_regcache_arch to get at
the current architecture by regcache.
* ppcnbsd-nat.c (ppcnbsd_supply_pcb): Likewise.
* ppc-linux-nat.c (fetch_altivec_register, fetch_spe_register)
(fetch_register, supply_vrregset, fetch_ppc_registers)
(store_altivec_register, store_spe_register, store_register)
(fill_vrregset, store_ppc_registers): Likewise.
* ppcobsd-nat.c (ppcobsd_supply_pcb): Likewise.
* win32-nat.c (do_win32_fetch_inferior_registers)
(do_win32_store_inferior_registers): Likewise.
* procfs.c (procfs_fetch_registers, procfs_store_registers): Likewise.
* remote-m32r-sdi.c (m32r_fetch_registers)
(m32r_store_registers): Likewise.
* remote-sim.c (gdbsim_fetch_register, gdbsim_store_register): Likewise.
* trad-frame.c (trad_frame_alloc_saved_regs): Replace current_gdbarch by
gdbarch.
* user-regs.c (user_reg_map_name_to_regnum): Likewise.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call)
(do_ppc_sysv_return_value, ppc64_sysv_abi_push_dummy_call)
(ppc64_sysv_abi_return_value): Likewise.
* m32c-tdep.c (m32c_register_reggroup_p): Likewise.
* m2-lang.c (build_m2_types): Likewise.
* ppc-linux-tdep.c (ppc_linux_sigtramp_cache
* ppcnbsd-tdep.c (ppcnbsd_sigtramp_cache_init): Likewise.
* ppcobsd-tdep.c (ppcobsd_sigtramp_frame_cache): Likewise.
* rs6000-tdep.c (ppc_dwarf2_frame_init_reg): Likewise.
* m68hc11-tdep.c (m68hc11_frame_unwind_cache): Use get_frame_arch to
get at the current architecture by frame_info.
* gcore.c (derive_stack_segment): Likewise.
* shnbsd-nat.c (GETREGS_SUPPLIES): Add gdbarch parameter.
(shnbsd_fetch_inferior_registers, shnbsd_store_inferior_registers): Add
gdbarch to GETREGS_SUPPLIES call.
2007-11-16 Ulrich Weigand <uweigand@de.ibm.com>
* elfread.c (ST_REGULAR, ST_DYNAMIC, ST_SYNTHETIC): New defines.
(elf_symtab_read): Rename DYNAMIC argument to TYPE. Do not access
ELF-private symbol data when processing synthetic symbols. Use
udata.p to get at size of ppc64 synthetic 'dot' symbols.
(elf_symfile_read): Pass TYPE argument to elf_symtab_read.
2007-11-15 Doug Evans <dje@google.com>
* buildsym.h (subfiles): Move ...
* buildsym.c (subfiles): ... to here and make static.
* symmisc.c (maintenance_info_symtabs): Print linetable info.
2007-11-15 Markus Deuling <deuling@de.ibm.com>
* mipsnbsd-tdep.h (SIZEOF_STRUCT_REG, SIZEOF_STRUCT_FPREG): Remove
2007-11-15 Markus Deuling <deuling@de.ibm.com>
* arm-tdep.c (arm_prologue_this_id): Replace LOWEST_PC by its
expression and use get_frame_arch to replace current_gdbarch by frame's
architecture.
* arm-tdep.h (LOWEST_PC): Remove
2007-11-15 Vladimir Prus <vladimir@codesourcery.com>
Apply const qualifier to some users of bp_location.
* breakpoint.h (struct bpstats): Make
the breakpoint_at field point at const bp_location.
* breakpoint.c (bpstat_alloc): Accept const
bp_location.
(breakpoint_here_p, breakpoint_inserted_here_p)
(software_breakpoint_inserted_here_p)
(breakpoint_thread_match, bpstat_stop_status)
(read_memory_nobpt, bpstat_have_active_hw_watchpoints): Use
const bp_location for iteration.
(print_it_typical, print_bp_stop_message): Use
const bp_location variable.
2007-11-15 Vladimir Prus <vladimir@codesourcery.com>
Make mark_breakpoints_out static.
* breakpoint.h (mark_breakpoints_out): Remove
declaration.
* breakpoint.c (mark_breakpoints_out): Make static.
2007-11-15 Vladimir Prus <vladimir@codesourcery.com>
Prevent clear_command from directly modifying breakpoint list.
* Makefile.in (breakpoint_h): Update dependency.
* breakpoint.c (clear_command): Do not remove
breakpoints from breakpoint_chain. Collect breakpoints
to delete in a vector.
* breakpoint.h (breakpoint_p): New typedef for pointer to
breakpoint. Register vector of breakpoint_p.
2007-11-15 Vladimir Prus <vladimir@codesourcery.com>
Remove 'run_cleanup'.
* defs.h (do_run_cleanups, make_run_cleanup): Remove
declarations.
* infcmd.c (run_command_1): Call clear_solib instead
of do_run_cleanups.
* jv-lang.c (java_rerun_cleanup): Remove, for lack of
any use.
* solib.c (solib_cleanup_queued, do_clear_solib): Remove.
(update_solib_lib): Don't setup run cleanup.
(no_shared_libraries): Call clear_solib, not do_clear_solib.
* utils.c (run_cleanup_chain, make_run_cleanup)
(do_run_cleanups): Remove.
2007-11-15 Vladimir Prus <vladimir@codesourcery.com>
Remove CLEAR_SOLIB use.
* corelow.c (core_close): Don't check for CLEAR_SOLIB.
* infcmd.c (attach_command): Likewise.
2007-11-14 Doug Evans <dje@google.com>
* buildsym.c (start_subfile,start_symtab): Doc fixes.
2007-11-13 Thiago Jung Bauermann <bauerman@br.ibm.com>
* tui/tui-data.c (tui_prev_win): Guard against NULL.
2007-11-12 Markus Deuling <deuling@de.ibm.com>
* gdbarch.sh (gdbarch_alloc): Replace current_gdbarch by gdbarch. Remove
obsolete comment.
(verify_gdbarch, gdbarch_dump): Likewise.
(do_read): Update comment.
(addr_bit, bfd_arch_info, target_desc, long_long_bit, floatformat)
(ptr_bit, name_of_malloc): Replace current_gdbarch by gdbarch.
* gdbarch.{c,h}: Regenerate.
2007-11-12 Markus Deuling <deuling@de.ibm.com>
* xtensa-tdep.c (ARG_1ST): Replace ARGS_FIRST_REG by its expression.
(ARGS_FIRST_REG): Remove.
(areg_numer): New function.
(xtensa_pseudo_register_read, xtensa_frame_prev_register)
(xtensa_extract_return_value, xtensa_store_return_value)
(xtensa_frame_cache): Replace AREG_NUMBER by areg_number.
(AREG_NUMBER): Remove.
(XTENSA_IS_ENTRY, ARG_NOF, ARG_1ST): Add gdbarch as parameter.
(xtensa_frame_cache): Update use of XTENSA_IS_ENTRY.
(xtensa_push_dummy_call): Update use of ARG_NOF.
(extract_call_winsize): Add gdbarch as parameter. Replace
current_gdbarch by gdbarch.
(xtensa_extract_return_value, xtensa_store_return_value): Update call
of extract_call_winsize.
2007-11-10 Joel Brobecker <brobecker@adacore.com>
* NEWS: Add entry for new set/show print frame-args command.
2007-11-09 Kevin Buettner <kevinb@redhat.com>
* mn10300-tdep.c (mn10300_dwarf2_reg_to_regnum): Add missing
register number to map. Adjust warning check and error/warning
return value code to match expectations of this function's callers.
2007-11-09 Joel Brobecker <brobecker@adacore.com>
* stack.c (print_this_frame_argument_p): Handle arguments passed
by reference properly.
2007-11-09 Joel Brobecker <brobecker@adacore.com>
* stack.c (print_frame_arguments_choices): New static global.
(print_frame_arguments): Likewise.
(print_this_frame_argument_p): New function.
(print_frame_args): Print the argument value only when appropriate.
(_initialize_task): Add new "set/show print frame-arguments" command.
2007-11-09 Luis Machado <luisgpm@br.ibm.com>
* ppc-linux-nat.c (ppc_linux_insert_watchpoint): Move
saved_dabr_value assignment to the correct position.
2007-11-09 Markus Deuling <deuling@de.ibm.com>
* arch-utils.c (generic_convert_register_p): Add gdbarch as parameter.
* arch-utils.h (generic_convert_register_p): Likewise.
2007-11-09 Markus Deuling <deuling@de.ibm.com>
* gdbarch.sh (convert_register_p): Add gdbarch as parameter.
* ia64-tdep.c (ia64_convert_register_p): Likewise.
* i387-tdep.c (i387_convert_register_p): Likewise.
* i387-tdep.h (i387_convert_register_p): Likewise.
* alpha-tdep.c (alpha_convert_register_p): Likewise.
* gdbarch.{c,h}: Regenerate.
* rs6000-tdep.c (rs6000_convert_register_p): Add gdbarch as parameter.
Replace current_gdbarch by gdbarch.
* mips-tdep.c (mips_convert_register_p): Likewise.
* m68k-tdep.c (m68k_convert_register_p): Likewise.
* i386-tdep.c (i386_convert_register_p): Likewise.
2007-11-08 Aleksandar Ristovski <aristovski@qnx.com>
* gdb_string.h: Include <strings.h>.
2007-11-08 Vladimir Prus <vladimir@codesourcery.com>
* breakpoint.c (break_command_1): Remove
pending_bp parameter.
(create_breakpoint): Likewise.
(create_breakpoints): Likewise. Adjust call to
create_breakpoint.
(break_command_1): Likewise. Adjust call to
create_breakpoints.
(do_captured_breakpoint): Adjust call to
create_breakpoints.
(break_command, tbreak_command, hbreak_command)
(stopin_command, stopat_command): Adjust call
to break_command_1.
2007-11-07 Joseph Myers <joseph@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
* ppc-sysv-tdep.c (ppc64_sysv_abi_push_dummy_call): Right-align
struct values smaller than one doubleword; left-align those
larger. Pass structs containing a single floating-point value in
registers.
2007-11-07 Joseph Myers <joseph@codesourcery.com>
Daniel Jacobowitz <dan@codesourcery.com>
* gdbtypes.c (floatformats_ibm_long_double): New.
* gdbtypes.h (floatformats_ibm_long_double): Declare.
* ia64-tdep.c (floatformat_ia64_ext): Update for addition of
split_half field.
* mips-tdep.c (n32n64_floatformat_always_valid,
floatformat_n32n64_long_double_big, floatformats_n32n64_long):
Remove.
(mips_gdbarch_init): Use floatformats_ibm_long_double instead of
floatformats_n32n64_long.
* ppc-linux-tdep.c (ppc_linux_init_abi): Use 128-bit IBM long
double.
* doublest.c (convert_floatformat_to_doublest,
convert_doublest_to_floatformat): Handle split floating-point
formats.
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Handle IBM long
double arguments.
(ppc64_sysv_abi_push_dummy_call): Likewise.
(do_ppc_sysv_return_value): Handle IBM long double return.
2007-11-07 Vladimir Prus <vladimir@codesourcery.com>
Fix crash when a variable object being deleted
has any of its children deleted previously.
* varobj.c (delete_variable_1): Don't recurse
into deleted children.
2007-11-07 Markus Deuling <deuling@de.ibm.com>
* gdbarch.sh (legacy_virtual_frame_pointer): Add gdbarch parameter.
* gdbarch.{c,h}: Regenerate.
* arch-utils.c (legacy_virtual_frame_pointer): Add gdbarch parameter.
Replace current_gdbarch by gdbarch.
* m32c-tdep.c (m32c_virtual_frame_pointer): Likewise.
* mips-tdep.c (mips_virtual_frame_pointer): Likewise.
* spu-tdep.c (spu_virtual_frame_pointer): Likewise.
2007-11-07 Markus Deuling <deuling@de.ibm.com>
* shnbsd-tdep.c (shnbsd_supply_gregset, shnbsd_collect_gregset): Use
get_regcache_arch to get at the current architecture by regcache.
* xstormy16-tdep.c (xstormy16_frame_prev_register): Use get_frame_arch
to get at the current architecture by frame_info.
* fbsd-nat.c (fbsd_make_corefile_notes): Use get_regcache_arch to get
at the current architecture by regcache.
* gnu-v3-abi.c (gnuv3_skip_trampoline): Use get_frame_arch to get at
the current architecture by frame_info.
(build_gdb_vtable_type): Replace current_gdbarch by gdbarch.
* aix-thread.c (special_register_p): Add gdbarch as parameter.
(fetch_regs_kernel_thread, store_regs_kernel_thread): Add gdbarch to
caller of special_register_p.
2007-11-07 Markus Deuling <deuling@de.ibm.com>
* infcall.c (call_function_by_hand): Use get_frame_arch to get at the
current architecture by frame_info.
2007-11-07 Markus Deuling <deuling@de.ibm.com>
* xtensa-tdep.h (SIZEOF_GREGSET, XTENSA_ELF_NGREG) Remove.
2007-11-07 Markus Deuling <deuling@de.ibm.com>
* s390-nat.c (supply_gregset, fill_gregset): Use get_regcache_arch to
get at the current architecture by regcache.
(SUBOFF): Add gdbarch to macro definition.
2007-11-07 Markus Deuling <deuling@de.ibm.com>
* gdbarch.sh (breakpoint_from_pc): Add gdbarch parameter.
* gdbarch.{c,h}: Regenerate.
* xtensa-tdep.c (xtensa_breakpoint_from_pc): Add gdbarch parameter.
Replace current_gdbarch by gdbarch.
* sh-tdep.c (sh_breakpoint_from_pc): Likewise.
* sh64-tdep.c (sh64_breakpoint_from_pc): Likewise.
* score-tdep.c (score_breakpoint_from_pc): Likewise.
* mips-tdep.c (mips_breakpoint_from_pc): Likewise.
* m32r-tdep.c (m32r_breakpoint_from_pc): Likewise.
* iq2000-tdep.c (iq2000_breakpoint_from_pc): Likewise.
* arm-tdep.c (arm_breakpoint_from_pc): Likewise.
* xstormy16-tdep.c (xstormy16_breakpoint_from_pc): Add gdbarch
parameter.
* vax-tdep.c (vax_breakpoint_from_pc): Likewise.
* v850-tdep.c (v850_breakpoint_from_pc): Likewise.
* spu-tdep.c (spu_breakpoint_from_pc): Likewise.
* sparc-tdep.c (sparc_breakpoint_from_pc): Likewise.
* s390-tdep.c (s390_breakpoint_from_pc): Likewise.
* mn10300-tdep.c (mn10300_breakpoint_from_pc): Likewise.
* mt-tdep.c (mt_breakpoint_from_pc): Likewise.
* mep-tdep.c (mep_breakpoint_from_pc): Likewise.
* m88k-tdep.c (m88k_breakpoint_from_pc): Likewise.
* m68hc11-tdep.c (m68hc11_breakpoint_from_pc): Likewise.
* m32c-tdep.c (m32c_breakpoint_from_pc): Likewise.
* ia64-tdep.c (ia64_breakpoint_from_pc): Likewise.
* i386-tdep.c (i386_breakpoint_from_pc): Likewise.
* hppa-tdep.c (hppa_breakpoint_from_pc): Likewise.
* h8300-tdep.c (h8300_breakpoint_from_pc): Likewise.
* frv-tdep.c (frv_breakpoint_from_pc): Likewise.
* cris-tdep.c (cris_breakpoint_from_pc): Likewise.
* avr-tdep.c (avr_breakpoint_from_pc): Likewise.
* alpha-tdep.c (alpha_breakpoint_from_pc): Likewise.
* m68k-tdep.c (m68k_local_breakpoint_from_pc): Likewise.
* rs6000-tdep.c (rs6000_breakpoint_from_pc): Add gdbarch parameter.
Replace current_gdbarch by gdbarch.
(rs6000_software_single_step): Use get_frame_arch to get at the
current architecture by frame_info. Add gdbarch to
rs6000_breakpoint_from_pc call.
2007-11-07 Markus Deuling <deuling@de.ibm.com>
* frv-tdep.c (frv_register_name, frv_check_watch_resources): Replace
macro CURRENT_VARIANT by its expression.
(CURRENT_VARIANT): Remove.
(frv_check_watch_resources): Add gdbarch parameter.
2007-11-07 Markus Deuling <deuling@de.ibm.com>
* MAINTAINERS (Write After Approval): Add self.
2007-11-05 Ulrich Weigand <uweigand@de.ibm.com>
* features/rs6000/power-core.xml: Use uint32 as register type.
* features/rs6000/power64-core.xml: Use uint64/uint32 as register type.
* features/rs6000/powerpc-32.c: Regenerate.
* features/rs6000/powerpc-403.c: Regenerate.
* features/rs6000/powerpc-403gc.c: Regenerate.
* features/rs6000/powerpc-505.c: Regenerate.
* features/rs6000/powerpc-602.c: Regenerate.
* features/rs6000/powerpc-603.c: Regenerate.
* features/rs6000/powerpc-604.c: Regenerate.
* features/rs6000/powerpc-64.c: Regenerate.
* features/rs6000/powerpc-7400.c: Regenerate.
* features/rs6000/powerpc-750.c: Regenerate.
* features/rs6000/powerpc-860.c: Regenerate.
* features/rs6000/powerpc-e500.c: Regenerate.
2007-11-05 Joel Brobecker <brobecker@adacore.com>
* breakpoint.c (set_raw_breakpoint_without_location): Make static.
2007-11-05 Joel Brobecker <brobecker@adacore.com>
* breakpoint.h (create_solib_load_event_breakpoint)
(create_solib_unload_event_breakpoint)
(create_fork_event_catchpoint, create_vfork_event_catchpoint)
(create_exec_event_catchpoint): Delete declaration.
* breakpoint.c (create_solib_load_event_breakpoint)
(solib_load_unload_1, create_solib_unload_event_breakpoint): Delete.
(create_fork_event_catchpoint, create_vfork_event_catchpoint)
(create_exec_event_catchpoint): Make static.
2007-11-05 Joel Brobecker <brobecker@adacore.com>
* breakpoint.h (set_breakpoint_sal): Remove declaration.
* breakpoint.c (set_breakpoint_sal): Delete.
2007-11-05 Joel Brobecker <brobecker@adacore.com>
* buildsym.c (finish_block): Remove "#if 1"/"#endif" brackets.
(make_blockvector): Likewise. Remove FIXME comment.
2007-11-05 Luis Machado <luisgpm@br.ibm.com>
* printcmd.c: (printf_command): Add support for new DFP
modifiers %H, %D and %DD.
* configure.ac: Add check for DECFLOAT printf support.
* configure: Regenerated.
2007-11-02 Ulrich Weigand <uweigand@de.ibm.com>
* gdbtypes.h (struct cplus_struct_type): Remove runtime_ptr member.
(TYPE_RUNTIME_PTR, TYPE_VTABLE, TYPE_HAS_VTABLE,
TYPE_PRIMARY_BASE, TYPE_VIRTUAL_BASE_LIST): Remove macros.
(HP_ACC_VFUNC_START, HP_ACC_VBASE_START, HP_ACC_TYPEINFO_OFFSET,
HP_ACC_TOP_OFFSET_OFFSET): Likewise.
(has_vtable, primary_base_class, virtual_base_list_length,
virtual_base_list_length_skip_primaries, virtual_base_index,
virtual_base_index_skip_primaries, class_index_in_primary_list,
count_virtual_fns): Remove prototypes.
* gdbtypes.c (has_vtable, primary_base_class, current_vbase_list,
virtual_base_list_aux, virtual_base_list, virtual_base_list_length,
virtual_base_list_length_skip_primaries, virtual_base_index,
virtual_base_index_skip_primaries, class_index_in_primary_list,
count_virtual_fns): Remove.
* cp-valprint.c (cp_print_hpacc_virtual_table_entries): Remove.
(hpacc_vtbl_ptr_name, hpacc_vtbl_ptr_type_name): Remove.
(cp_print_value_fields): Remove support for HP aCC vtables.
(cp_print_value): Likewise.
* c-typeprint.c (c_type_print_base): Likewise.
* value.h (find_rt_vbase_offset): Remove prototype.
* valops.c (find_rt_vbase_offset): Remove.
(search_struct_method): Remove support for HP aCC vtables.
(find_method_list): Likewise.
2007-11-02 Ulrich Weigand <uweigand@de.ibm.com>
* language.h (struct language_defn): Remove la_builtin_type_vector
and string_char_type members.
* language.c (language_string_char_type): No longer consult
la->string_char_type.
(language_lookup_primitive_type_by_name): No longer consult
current_language->la_builtin_type_vector.
* language.c (unknown_language_defn, auto_language_defn,
local_language_defn): Adapt initializer.
* ada-lang.c (ada_language_defn): Likewise.
* c-lang.c (c_language_defn, cplus_language_defn, asm_language_defn,
minimal_language_defn): Likewise.
* f-lang.c (f_language_defn): Likewise.
* jv-lang.c (java_language_defn): Likewise.
* m2-lang.c (m2_language_defn): Likewise.
* objc-lang.c (objc_language_defn): Likewise.
* p-lang.c (pascal_language_defn): Likewise.
* scm-lang.c (scm_language_defn): Likewise.
2007-11-02 Markus Deuling <deuling@de.ibm.com>
* frame.c (frame_id_inner): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
(frame_find_by_id, get_prev_frame_1): Use get_frame_arch to get at the
current architecture by frame_info.
* frame.h (frame_id_inner): Add gdbarch parameter.
* stack.c (return_command): Use get_frame_arch to get at the current
architecture by frame_info. Update call of frame_id_inner.
* infrun.c (handle_inferior_event): Likewise.
* dummy-frame.c (dummy_frame_push): Use get_regcache_arch to get at the
current architecture by regcache. Update call of frame_id_inner.
2007-11-02 Markus Deuling <deuling@de.ibm.com>
* gdbarch.sh (register_name): Add gdbarch parameter.
* gdbarch.{c,h}: Regenerate.
* target-descriptions.c (tdesc_register_name): Add gdbarch parameter.
(tdesc_register_name): Replace current_gdbarch by gdbarch.
* target-descriptions.h (tdesc_register_name): Add gdbarch parameter.
* xstormy16-tdep.c (xstormy16_register_name): Add gdbarch parameter.
* vax-tdep.c (vax_register_name): Add gdbarch parameter.
* spu-tdep.c (spu_register_name): Add gdbarch parameter.
* s390-tdep.c (s390_register_name): Add gdbarch parameter.
* mt-tdep.c (mt_register_name): Add gdbarch parameter.
(mt_registers_info): Replace current_gdbarch by gdbarch.
(mt_register_reggroup_p): Add gdbarch to mt_register_name call.
* mips-tdep.c (mips_register_name): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
(mips_register_name): Add gdbarch to tdesc_register_name call.
* mep-tdep.c (mep_register_name): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
(mep_register_reggroup_p): Add gdbarch to mep_register_name call.
* m32c-tdep.c (m32c_register_name): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
* m88k-tdep.c (m88k_register_name): Add gdbarch parameter.
* m68k-tdep.c (m68k_register_name): Add gdbarch parameter.
* m32r-tdep.c (m32r_register_name): Add gdbarch parameter.
(m32r_frame_unwind_cache): Use get_frame_arch to get at the current
architecture by frame_info.
* iq2000-tdep.c (iq2000_register_name): Add gdbarch parameter.
* ia64-tdep.c (ia64_register_name): Add gdbarch parameter.
* hppa-tdep.c (hppa32_register_name, hppa64_register_name): Add gdbarch
parameter.
* h8300-tdep.c (h8300_register_name, h8300s_register_name)
(h8300sx_register_name): Add gdbarch parameter.
* cris-tdep.c (cris_register_name, crisv32_register_name): Add
gdbarch parameter. Replace current_gdbarch by gdbarch.
(cris_gdbarch_init): Replace current_gdbarch by gdbarch (comment).
* avr-tdep.c (avr_register_name): Add gdbarch parameter.
* arm-tdep.c (arm_register_name): Add gdbarch paramete
* amd64-tdep.c (amd64_register_name): Add gdbarch parameter. Update
caller.
* amd64-tdep.h (amd64_register_name): Add gdbarch parameter.
* amd64-linux-tdep.c (amd64_linux_register_name): Add gdbarch parameter.
* alpha-tdep.c (alpha_register_name): Add gdbarch parameter.
(alpha_cannot_fetch_register, alpha_cannot_store_register): Update call
of alpha_register_name.
* frv-tdep.c (frv_register_name): Add gdbarch parameter.
* i386-tdep.c (i386_register_name): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
(i386_register_type): Replace ?current_gdbarch by gdbarch.
* i386-tdep.h (i386_register_name): Add gdbarch parameter.
* i386-linux-tdep.c (i386_linux_register_name): Add gdbarch parameter.
* m68hc11-tdep.c (m68hc11_register_name): Add gdbarch parameter.
(m68hc11_register_reggroup_p): Add gdbarch to call of
m68hc11_register_name.
* mn10300-tdep.c (mn10300_generic_register_name, am33_register_name)
(am33_2_register_name): Add gdbarch parameter.
(mn10300_frame_unwind_cache): Use get_frame_arch to get at the current
architecture by frame_info.
(mn10300_dump_tdep): Replace current_gdbarch by gdbarch.
* rs6000-tdep.c (rs6000_register_name): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
* score-tdep.c (score_register_name): Add gdbarch parameter.
(score_return_value, score_push_dummy_call): Replace current_gdbarch
by gdbarch.
* sh64-tdep.c (sh64_register_name): Add gdbarch parameter.
(sh64_compact_reg_base_num, sh64_register_convert_to_virtual)
(sh64_register_convert_to_raw, sh64_fv_reg_base_num)
(sh64_dr_reg_base_num, sh64_fpp_reg_base_num): Add gdbarch parameter
and update caller. Replace current_gdbarch by gdbarch.
(sh64_extract_return_value, sh64_store_return_value): Use
get_regcache_arch to get at the current architecture by regcache.
* sh-tdep.c (sh_sh_register_name, sh_sh3_register_name)
(sh_sh3e_register_name, sh_sh2e_register_name, sh_sh2a_register_name)
(sh_sh2a_nofpu_register_name, sh_sh_dsp_register_name)
(sh_sh3_dsp_register_name, sh_sh4_register_name)
(sh_sh4_nofpu_register_name, sh_sh4al_dsp_register_name): Add gdbarch
parameter.
(fv_reg_base_num, dr_reg_base_num, sh_justify_value_in_reg)
(sh_next_flt_argreg): Add gdbarch parameter and update caller. Replace
current_gdbarch by gdbarch.
(sh_extract_return_value_fpu, sh_store_return_value_fpu): Use
get_regcache_arch to get at the current architecture by regcache.
* sparc-tdep.c (sparc32_register_name): Add gdbarch parameter.
* sparc64-tdep.c (sparc64_register_name): Add gdbarch parameter.
* v850-tdep.c (v850_register_name, v850e_register_name): Add gdbarch
parameter.
(v850_unwind_sp, v850_unwind_pc): Replace current_gdbarch by gdbarch.
* xtensa-tdep.c (xtensa_register_name): Add gdbarch parameter. Replace
current_gdbarch by gdbarch.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write)
(xtensa_frame_prev_register): Add gdbarch parameter to
xtensa_register_name call.
2007-10-31 Ulrich Weigand <uweigand@de.ibm.com>
* ppc-linux-tdep.c (ppc_linux_skip_trampoline_code): Fall back to
find_solib_trampoline_target if PC is not in .plt section.
2007-10-31 Ulrich Weigand <uweigand@de.ibm.com>
* elfread.c (elf_symtab_read): When constructing a solib trampoline
minimal symbol from an undefined dynamic symbol, use proper section.
2007-10-31 Markus Deuling <deuling@de.ibm.com>
* arm-linux-nat.c (fetch_register, fetch_regs): Use get_regcache_arch
to get at the current architecture by regcache.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* libunwind-frame.c (libunwind_frame_sniffer)
libunwind_frame_prev_register, libunwind_sigtramp_frame_sniffer)
(libunwind_frame_cache): Use get_frame_arch to get at the current
architecture by frame_info.
(libunwind_get_reg_special): Replace current_gdbarch by gdbarch.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* iq2000-tdep.c (iq2000_frame_prev_register): Use get_frame_arch to get
at the current architecture by frame_info.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* inf-child.c (inf_child_fetch_inferior_registers): Use
get_regcache_arch to get at the current architecture by regcache.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* inf-ptrace.c (inf_ptrace_fetch_registers)
(inf_ptrace_fetch_register, inf_ptrace_store_register)
(inf_ptrace_store_registers): Use get_regcache_arch to get at the
current architecture by regcache.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* hpux-thread.c (hpux_thread_fetch_registers)
(hpux_thread_store_registers): Use get_regcache_arch to get at the
current architecture by regcache.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* hppa-tdep.c (hppa_frame_cache): Use get_frame_arch to get at the
current architecture by frame_info.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* go32-nat.c (fetch_register, go32_fetch_registers, store_register)
(go32_store_registers): Use get_regcache_arch to get at the current
architecture by regcache.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* gdbtypes.c (gdbtypes_post_init): Replace current_gdbarch by gdbarch.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* frv-linux-tdep.c (frv_linux_sigtramp_frame_cache): Use get_frame_arch
to get at the current architecture by frame_info.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* f-lang.c (build_fortran_types): Replace current_gdbarch by gdbarch.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* core-regset.c (fetch_core_registers): Use get_regcache_arch to get at
the current architecture by regcache.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* corelow.c (get_core_registers): Use get_regcache_arch to get at the
current architecture by regcache.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* bsd-uthread.c (bsd_uthread_fetch_registers)
(bsd_uthread_store_registers): Use get_regcache_arch to get at the
current architecture by regcache.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* avr-tdep.c (avr_frame_unwind_cache, avr_frame_prev_register): Use
get_frame_arch to get at the current architecture by frame_info.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* arm-tdep.c (arm_get_next_pc): Replace current_gdbarch by gdbarch.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* armnbsd-nat.c (arm_supply_gregset, fetch_register, store_register)
(store_regs): Use get_regcache_arch to get at the current architecture
by regcache.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* arm-linux-tdep.c (arm_linux_supply_gregset): Use get_regcache_arch
to get at the current architecture by regcache.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* alphabsd-nat.c (alphabsd_fetch_inferior_registers)
(alphabsd_store_inferior_registers): Use get_regcache_arch to get at
the current architecture by regcache.
2007-10-30 Markus Deuling <deuling@de.ibm.com>
* ada-lang.c (ada_language_arch_info): Replace current_gdbarch by
gdbarch.
2007-10-30 Daniel Jacobowitz <dan@codesourcery.com>
* ppc-sysv-tdep.c (ppc_sysv_abi_push_dummy_call): Check the selected
soft float and vector ABIs. Support the generic vector ABI for
AltiVec types.
(do_ppc_sysv_return_value): Likewise. Correct argument types and
casts.
(ppc64_sysv_abi_push_dummy_call): Assert that floating point is
supported.
* ppc-tdep.h (enum powerpc_vector_abi): New.
(struct gdbarch_tdep): Add soft_float and vector_abi.
* rs6000-tdep.c (setpowerpccmdlist, showpowerpccmdlist)
(powerpc_soft_float_global, powerpc_vector_strings)
(powerpc_vector_abi_global, powerpc_vector_abi_string): New.
(rs6000_gdbarch_init): Check for soft-float and vector ABI markings.
(set_powerpc_command, show_powerpc_command, powerpc_set_soft_float)
(powerpc_set_vector_abi): New.
(_initialize_rs6000_tdep): Register "set powerpc" and "show powerpc"
commands.
* Makefile.in (elf_ppc_h): New.
(rs6000-tdep.o): Update.
2007-10-29 Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
* ppc-linux-tdep.c (ppc32_linux_reg_offsets): Corrected
swapped offsets and VRSAVE offset.
(ppc64_linux_reg_offsets): Corrected swapped offsets.
(ppc32_linux_vrregset): Added.
(ppc_linux_regset_from_core_section): Added support for
.reg-ppc-vmx section.
* ppc-tdep.h (ppc_altivec_support_p): Declare.
(ppc_supply_vrregset): Declare.
(ppc_collect_vrregset): Declare.
* rs6000-tdep.c (ppc_altivec_support_p): Added.
(ppc_supply_vrregset): Added.
(ppc_collect_vrregset): Added.
* corelow.c (get_core_registers): Added support for
.reg-ppc-vmx section.
2007-10-29 Joel Brobecker <brobecker@adacore.com>
GDB 6.7.1 released.
2007-10-26 Jim Blandy <jimb@codesourcery.com>
* ax-gdb.h (expr_to_address_and_size): Delete declaration for
deleted function.
* tracepoint.c (tracepoint_operation): Report the deletion event
after we have unlinked the tracepoint from the list, and use the
proper tracepoint number.
* ax-gdb.c (expr_to_agent): Delete unused function.
(expr_to_address_and_size): Delete #if 0'd function.
* ax-gdb.h (expr_to_agent): Delete declaration.
* ax-gdb.c (gen_cast): Remove redundant assignment to
value->type. Doc fix.
* ax-general.c (gen_traced_pop, gen_int_literal)
(gen_usual_arithmetic): Check for typedefs.
2007-10-26 Joel Brobecker <brobecker@adacore.com>
* parse.c (prefixify_expression): Minor reformatting.
2007-10-25 Daniel Jacobowitz <dan@codesourcery.com>
* version.in: Use dot instead of dash.
2007-10-25 Daniel Jacobowitz <dan@codesourcery.com>
* linux-thread-db.c (check_for_thread_db): Only print if info_verbose.
2007-10-25 Pedro Alves <pedro_alves@portugalmail.pt>
* memory-map.c (parse_memory_map): Don't use an empty struct
initializer.
2007-10-25 Pedro Alves <pedro_alves@portugalmail.pt>
* signals/signals.c (signals): Update pointer to enum
target_signal declaration.
2007-10-25 Wu Zhou <woodzltc@cn.ibm.com>
Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
Jim Blandy <jimb@codesourcery.com>
* dwarf2read.c (read_partial_die): check the value
of DW_AT_calling_convention in Fortran programs.
2007-10-25 Wu Zhou <woodzltc@cn.ibm.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* c-exp.y (YYSTYPE): Add typed_val_decfloat for decimal
floating point in YYSTYPE union.
(DECFLOAT) Add token and expression element handling code.
(parse_number): Parse DFP constants, which end with suffix 'df',
'dd' or 'dl'. Return DECFLOAT.
* eval.c (evaluate_subexp_standard): Call value_from_decfloat to
handle OP_DECFLOAT.
* expression.h (enum exp_opcode): Add an opcode (OP_DECFLOAT)
for DFP constants.
(union exp_element): Add decfloatconst to represent DFP
elements, which is 16 bytes by default.
* parse.c (write_exp_elt_decfloatcst): New function to write a
decimal float const into the expression.
(operator_length_standard): Set operator length for OP_DECFLOAT
to 4.
* parser-defs.h (write_exp_elt_decfloatcst): Prototype.
* valarith.c (value_neg): Add code to handle the negation
operation of DFP values.
* value.c (value_from_decfloat): New function to get the value
from a decimal floating point.
* value.h (value_from_decfloat): Prototype.
2007-10-25 Wu Zhou <woodzltc@cn.ibm.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* c-lang.c (c_create_fundamental_type): Create fundamental
types for DFP.
* c-typeprint.c (c_type_print_varspec_prefix): Add
TYPE_CODE_DECFLOAT to no prefix needed case.
(c_type_print_varspec_suffix): Add TYPE_CODE_DECFLOAT to no
suffix needed case.
* c-valprint.c (c_val_print): Call print_decimal_floating to
print DFP values.
* dwarf2read.c (read_base_type): Read DW_ATE_decimal_float
attribute code and return TYPE_CODE_DECFLOAT.
(dwarf_base_type): Set dwarf2_fundamental_type for DFP values.
* gdbtypes.c (gdbtypes_post_init): Initialize builtin_decfloat,
builtin_decdouble and builtin_declong.
* gdbtypes.h (enum type_code): Add TYPE_CODE_DECFLOAT as a
type code for DFP.
(FT_DECFLOAT, FT_DBL_PREC_DECFLOAT, FT_EXT_PREC_DECFLOAT): New
types, for decimal floating point.
(FT_NUM_MEMBERS): Increment, new types added.
(struct builtin_type): Add builtin_decfloat, builtin_decdouble
and builtin_declong.
* valprint.c (print_decimal_floating): New function to print DFP
values.
* value.h (print_decimal_floating): Prototype.
2007-10-25 Wu Zhou <woodzltc@cn.ibm.com>
Thiago Jung Bauermann <bauerman@br.ibm.com>
* Makefile.in (LIBDECNUMBER_DIR, LIBDECNUMBER, LIBDECNUMBER_SRC
LIBDECNUMBER_CFLAGS): New macros for libdecnumber.
(INTERNAL_CFLAGS_BASE): Add LIBDECNUMBER_CFLAGS in.
(INSTALLED_LIBS): Add -ldecnumber in.
(CLIBS): Add LIBDECNUMBER in.
(decimal128_h, decimal64_h, decimal32_h): New macros for decimal
headers.
(dfp_h): New macros for decimal floating point.
(dfp.o): New target.
(COMMON_OBS): Add dfp.o in.
(c-exp.o): Add dfp_h as dependency.
(valprint.o): Add dfp_h as dependency.
(value.o): Add dfp_h as dependency.
* dfp.h: New header file for decimal floating point support in
GDB.
* dfp.c: New source file for decimal floating point support in
GDB. Implement decimal_from_string and decimal_to_string based
on libdecnumber API.
* configure.ac: Add AC_C_BIGENDIAN test.
* config.in, configure: Regenerate.
2007-10-25 David Ung <davidu@mips.com>
Maciej W. Rozycki <macro@mips.com>
PR exp/1926
* infcmd.c (registers_info): Check for a user register before
calling target's gdbarch_print_registers_info(). If found to be
so, extract the implicit value of user register and call
print_scalar_formatted().
* Makefile.in: (infcmd.o): Add $(user_regs_h).
2007-10-25 Joel Brobecker <brobecker@adacore.com>
* NEWS: Document status of hppa64-hpux support.
2007-10-24 Ulrich Weigand <uweigand@de.ibm.com>
* solib-svr4.c (set_solib_svr4_fetch_link_map_offsets): Call
set_solib_ops to install SVR4 operations.
(_initialize_svr4_solib): Do not set current_target_so_ops.
* config/i386/i386gnu.mh (NATDEPFILES): Move solib.o, solib-svr4.o ...
* config/i386/i386gnu.mt (TDEPFILES): ... to here.
2007-10-24 Ulrich Weigand <uweigand@de.ibm.com>
* solib-svr4.c (legacy_svr4_fetch_link_map_offsets_hook): Remove.
(solib_svr4_init): Initialize fetch_link_map_offsets to NULL.
* solib-svr4.h (legacy_svr4_fetch_link_map_offsets_hook): Remove.
* solib-legacy.c: Remove file.
* config/alpha/alpha-linux.mt (TDEPFILES): Remove solib-legacy.o.
* config/arm/linux.mt (TDEPFILES): Likewise.
* config/i386/i386gnu.mh (NATDEPFILES): Likewise.
* config/ia64/linux.mt (TDEPFILES): Likewise.
* config/m32r/linux.mt (TDEPFILES): Likewise.
* config/powerpc/linux.mt (TDEPFILES): Likewise.
* config/s390/s390.mt (TDEPFILES): Likewise.
* alpha-linux-tdep.c (alpha_linux_init_abi): Call
set_solib_svr4_fetch_link_map_offsets.
* i386gnu-tdep.c (i386gnu_init_abi): Likewise.
* ia64-linux-tdep.c (ia64_linux_init_abi): Likewise.
* i386gnu-tdep.c: Include "solib-svr4.h".
* Makefile.in: Update dependencies.
2007-10-24 Ulrich Weigand <uweigand@de.ibm.com>
* i386-nto-tdep.c: Include "solib.h".
(i386nto_init_abi): Use set_solib_ops instead of overwriting
current_target_so_ops members.
* solist.h (TARGET_SO_RELOCATE_SECTION_ADDRESSES): Remove.
(TARGET_SO_FIND_AND_OPEN_SOLIB): Remove.
(TARGET_SO_IN_DYNSYM_RESOLVE_CODE): Remove.
* Makefile.in: Update dependencies.
2007-10-24 Ulrich Weigand <uweigand@de.ibm.com>
* arm-wince-tdep.c: Include "solib.h" and "solib-target.h".
(arm_wince_init_abi): Call set_solib_ops.
* i386-cygwin-tdep.c: Include "solib.h" and "solib-target.h".
(i386_cygwin_init_abi): Call set_solib_ops.
* solib-target.c: Include "solib-target.h".
(solib_target_so_ops): Make global.
(_initialize_solib_target): Do not set current_target_so_ops.
* solib-target.h: New file.
* Makefile.in: Update dependencies.
2007-10-24 Ulrich Weigand <uweigand@de.ibm.com>
* mips-irix-tdep.c: Include "gdb_string.h", "solib.h", "solib-irix.h".
(mips_irix_init_abi): Call set_solib_ops.
* solib-irix.c: Include "solib.h" and "solib-irix.h".
(irix_so_ops): Make global.
(_initialize_irix_solib): Do not set current_target_so_ops.
* solib-irix.h: New file.
* Makefile.in: Update dependencies.
2007-10-24 Ulrich Weigand <uweigand@de.ibm.com>
* configure.tgt: Remove hppa*64*-*-hpux11* special case.
* config/pa/hppa64.mt: Delete file.
* config/pa/hppahpux.mt (MT_CFLAGS): Remove.
(TDEPFILES): Move somread.o to ...
* config/pa/hpux.mh (NATDEPFILES): ... here.
* configure.ac: Add check for elf_hp.h header.
Search libdl and libxpdl for dlgetmodinfo.
* config.in, configure: Regenerate.
* solib-pa64.c: Conditionalize compilation on #ifdef HAVE_ELF_HP_H
instead of #ifndef PA_SOM_ONLY. Include "solib.h".
(pa64_solib_select): Take gdbarch instead of tdep argument. Call
set_solib_ops instead of modifying current_target_so_ops.
* solib-pa64.h (pa64_solib_select): Update prototype.
* solib-som.c: Remove include of "som.h". Include "solib.h".
(som_solib_select): Take gdbarch instead of tdep argument. Call
set_solib_ops instead of modifying current_target_so_ops.
* solib-som.h (som_solib_select): Update prototype.
* hppa-hpux-tdep.c (hppa_hpux_som_init_abi): Pass gdbarch instead
of tdep to som_solib_select call.
(hppa_hpux_elf_init_abi): Pass gdbarch instead of tdep to
pa64_solib_select call.
* Makefile.in: Update dependencies.
2007-10-24 Ulrich Weigand <uweigand@de.ibm.com>
* frv-tdep.c: Include "solib.h".
(frv_gdbarch_init): Call set_solib_ops.
* frv-tdep.h (struct target_so_ops): Add forward reference.
(frv_so_ops): Add extern declaration.
* solib-frv.c (frv_so_ops): Make global.
(_initialize_frv_solib): Do not set current_target_so_ops.
* Makefile.in: Update dependencies.
2007-10-24 Ulrich Weigand <uweigand@de.ibm.com>
* solib.c (solib_global_lookup): Use solib_ops instead of global
current_target_so_ops.
2007-10-24 Ulrich Weigand <uweigand@de.ibm.com>
* config/frv/frv.mt (DEPRECATED_TM_FILE): Remove.
* config/frv-tm-frv.h: Delete file.
2007-10-24 Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention gdbserver support for non-libthread_db operation.
2007-10-24 Daniel Jacobowitz <dan@codesourcery.com>
* amd64-tdep.c (amd64_convert_register_p): Delete.
(amd64_init_abi): Use i387_convert_register_p.
* alpha-tdep.c (alpha_convert_register_p): Return zero for
eight byte types.
(alpha_register_to_value, alpha_value_to_register): Do not handle
eight byte types.
* i386-tdep.c (i386_convert_register_p): Use i387_convert_register_p.
* i387-tdep.c (i387_convert_register_p): New.
(i387_register_to_value, i387_value_to_register): Update comments.
* i387-tdep.h (i387_convert_register_p): Declare.
* ia64-tdep.c (ia64_convert_register_p): Return zero for
builtin_type_ia64_ext.
(ia64_gdbarch_init): Do not initialize builtin_type_ia64_ext here.
(_initialize_ia64_tdep): Initialize builtin_type_ia64_ext here.
* m68k-tdep.c (m68k_convert_register_p): Return zero for
builtin_type_m68881_ext.
(m68k_register_to_value, m68k_value_to_register): Update comments.
2007-10-24 Nathan Sidwell <nathan@codesourcery.com>
* target-memory.c (claim_memory): Propagate baton for split memory
requests.
2007-10-24 Pedro Alves <pedro_alves@portugalmail.pt>
PR gdb/2341
* sol-thread.c (sol_thread_fetch_registers): Work around gcc 3.4
alias warning bug.
2007-10-24 Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
* symtab.c (find_line_symtab): scan through psymtabs
when exact_match is zero.
2007-10-23 Atsushi Nemoto <anemo@mba.ocn.ne.jp>
* mips-tdep.c (LL_OPCODE, LLD_OPCODE, SC_OPCODE, SCD_OPCODE): Define.
(deal_with_atomic_sequence): New.
(mips_software_single_step): Use it.
2007-10-23 Daniel Jacobowitz <dan@codesourcery.com>
PR gdb/2336
* configure.ac: Modify $LIBINTL before the BFD check.
* configure: Regenerated.
2007-10-23 Joel Brobecker <brobecker@adacore.com>
* buildsym.c (free_pending_blocks): Remove commented-out code.
(make_blockvector): Likewise. Re-use free_pending_blocks.
(end_symtab): Remove commented-out code.
2007-10-22 Daniel Jacobowitz <dan@codesourcery.com>
* top.c (command_loop): Fix output for shrinkage.
2007-10-22 Daniel Jacobowitz <dan@codesourcery.com>
* cp-name-parser.y (exp1): Add & ( var ) as a reference expression.
(exp): Remove and document function-like casts.
2007-10-22 Daniel Jacobowitz <dan@codesourcery.com>
* cp-support.c: Include "safe-ctype.h".
(cp_already_canonical): New function.
(cp_canonicalize_string): Use it. Return NULL for already canonical
strings.
(mangled_name_to_comp): Update call to cp_demangled_name_to_comp.
(cp_func_name, remove_params): Likewise.
(cp_find_first_component_aux): Use ISSPACE.
* cp-support.h (cp_demangled_name_to_comp): Correct comment. Remove
MEMORY_P argument.
* cp-name-parser.y (ALLOC_CHUNK): Define.
(struct demangle_info): Add PREV and NEXT. Increase the size of
COMPS.
(d_grab): Convert to a function.
(allocate_info): Rewrite.
(cp_demangled_name_to_comp): Remove MEMORY argument. Do not use
strlen. Update call to allocate_info. Do not free it on failure.
(main): Update calls to cp_demangled_name_to_comp.
* Makefile.in (cp-support.o): Update.
2007-10-22 Markus Deuling <deuling@de.ibm.com>
* std-regs.c (value_of_builtin_frame_fp_reg)
value_of_builtin_frame_pc_reg, value_of_builtin_frame_sp_reg)
value_of_builtin_frame_ps_reg): Use get_frame_arch to get at the
current architecture by frame_info.
2007-10-22 Markus Deuling <deuling@de.ibm.com>
* reggroups.c (default_register_reggroup_p): Replace current_gdbarch
by gdbarch.
2007-10-22 Markus Deuling <deuling@de.ibm.com>
* infcmd.c (default_print_registers_info, print_return_value)
(print_vector_info, print_float_info): Replace current_gdbarch by
gdbarch.
(registers_info): Use get_frame_arch to get at the current
architecture by frame_info.
2007-10-22 Markus Deuling <deuling@de.ibm.com>
* i387-tdep.c (i387_collect_fsave, i387_collect_fxsave): Use
get_regcache_arch to get at the current architecture by regcache.
2007-10-22 Markus Deuling <deuling@de.ibm.com>
* target.c (debug_print_register): Use get_regcache_arch to get at the
current architecture by regcache.
2007-10-21 Daniel Jacobowitz <dan@codesourcery.com>
* dwarf2read.c (read_file_scope): Add a comment.
(dwarf2_add_field, dwarf2_add_member_fn, read_structure_type)
(read_enumeration_type, process_enumeration_scope, read_array_type)
(read_typedef, read_base_type, read_subrange_type)
(read_unspecified_type): Use dwarf2_name.
2007-10-21 Daniel Jacobowitz <dan@codesourcery.com>
* coffread.c (coff_symfile_finish): Call dwarf2_free_objfile.
* dwarf2read.c (dwarf2_free_objfile): New.
* elfread.c (elf_symfile_finish): Call dwarf2_free_objfile.
* symfile.h (dwarf2_free_objfile): Declare.
2007-10-21 Joel Brobecker <brobecker@adacore.com>
* hppa-hpux-nat.c (hppa_hpux_store_register): Add missing semi-colon.
2007-10-21 Luis Machado <luisgpm@br.ibm.com>
* rs6000-tdep.c (ppc_dwarf2_frame_init_reg): New function.
* (rs6000_gdbarch_init): Install ppc_dwarf2_frame_init_reg as
default dwarf2_frame_set_init_reg function.
2007-10-21 Pedro Alves <pedro_alves@portugalmail.pt>
* NEWS: Mention native MinGW configuration.
2007-10-19 Ulrich Weigand <uweigand@de.ibm.com>
* gdbarch.sh: Remove "macro" column of input table. Remove handling
of "macro" column throughout the file. Remove (empty) "macro" entry
of all gdbarch functions.
2007-10-19 Ulrich Weigand <uweigand@de.ibm.com>
* gdbarch.sh (sofun_address_maybe_missing): New gdbarch variable.
* gdbarch.c, gdbarch.h: Regenerate.
* dbxread.c (find_stab_function_addr): Define unconditionally.
(read_dbx_symtab): Use gdbarch_sofun_address_maybe_missing
instead of SOFUN_ADDRESS_MAYBE_MISSING.
(end_psymtab): Likewise.
(process_one_symbol): Likewise.
* mdebugread.c (parse_partial_symbols): Likewise.
* symtab.h (struct minimal_symbol): Always define "filename" member.
* elfread.c (elf_symtab_read): Use msym->filename unconditionally.
* minsyms.c (lookup_minimal_symbol): Likewise.
* symmisc.c (dump_msymbols): Likewise.
* config/i386/i386sol2.mt (DEPRECATED_TM_FILE): Remove.
* config/i386/linux.mt (DEPRECATED_TM_FILE): Remove.
* config/i386/tm-i386sol2.h: Remove file.
* config/i386/tm-linux.h: Remove file.
* i386-linux-tdep.c (i386_linux_init_abi): Add call to
set_gdbarch_sofun_address_maybe_missing.
* i386-sol2-tdep.c (i386_sol2_init_abi): Likewise.
* config/powerpc/linux.mt (DEPRECATED_TM_FILE): Remove.
* config/powerpc/nbsd.mt (DEPRECATED_TM_FILE): Remove.
* config/powerpc/obsd.mt (DEPRECATED_TM_FILE): Remove.
* config/powerpc/ppc-eabi.mt (DEPRECATED_TM_FILE): Remove.
* config/powerpc/ppc-sim.mt (DEPRECATED_TM_FILE): Remove.
* config/powerpc/tm-ppc-eabi.h: Remove file.
* rs6000-tdep.c (rs6000_gdbarch_init): Add call to
set_gdbarch_sofun_address_maybe_missing.
* config/sparc/sol2-64.mt (DEPRECATED_TM_FILE): Remove.
* config/sparc/sol2.mt (DEPRECATED_TM_FILE): Remove.
* config/sparc/tm-sol2.h: Remove file.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Add call to
set_gdbarch_sofun_address_maybe_missing.
* sparc-sol2-tdep.c (sparc32_sol2_init_abi): Likewise.
2007-10-19 Ulrich Weigand <uweigand@de.ibm.com>
* gdbarch.sh (static_transform_name): New gdbarch callback.
* gdbarch.c, gdbarch.h: Regenerate.
* dbxread.c (read_dbx_symtab): Use gdbarch_static_transform_name
instead of STATIC_TRANSFORM_NAME.
* mdebugread.c (parse_partial_symbols): Likewise.
* stabsread.c (define_symbol): Likewise.
* xcoffread.c (scan_xcoff_symtab): Likewise.
* config/i368/tm-i386sol2.h (STATIC_TRANSFORM_NAME): Remove.
(IS_STATIC_TRANSFORM_NAME): Remove.
* i386-tdep.c (sunpro_static_transform_name): Remove, move to ...
* i386-sol2-tdep.c (i386_sol2_static_transform_name): ... here.
(i386_sol2_init_abi): Install it.
* config/sparc/tm-sol2.h (STATIC_TRANSFORM_NAME): Remove.
(IS_STATIC_TRANSFORM_NAME): Remove.
* sparc-tdep.c (sparc_stabs_unglobalize_name): Remove, move to ...
* sparc-sol2-tdep.c (sparc_sol2_static_transform_name): ... here.
(sparc32_sol2_init_abi): Install it.
* sparc64-sol2-tdep.c (sparc64_sol2_init_abi): Likewise.
* sparc-tdep.h (sparc_sol2_static_transform_name): Add prototype.
2007-10-18 Daniel Jacobowitz <dan@codesourcery.com>
* mips-tdep.c (mips_xfer_register): Take a gdbarch argument.
(mips_n32n64_return_value, mips_o32_return_value)
(mips_o64_return_value): Update calls to mips_xfer_register.
2007-10-17 Daniel Jacobowitz <dan@codesourcery.com>
* frame.c (frame_unwind_unsigned_register): Delete.
(frame_sp_unwind): Use frame_unwind_register_unsigned instead.
* frame.h (frame_unwind_unsigned_register): Delete prototype.
* alpha-linux-tdep.c, alpha-mdebug-tdep.c, alpha-tdep.c,
avr-tdep.c, cris-tdep.c, frv-tdep.c, m68hc11-tdep.c, mn10300-tdep.c,
mt-tdep.c: Replace frame_unwind_unsigned_register with
frame_unwind_register_unsigned.
2007-10-16 Pedro Alves <pedro_alves@portugalmail.pt>
* config/i386/mingw.mh, config/i386/mingw.mt: New files.
* configure.tgt (i[34567]86-*-mingw32*): Set gdb_target = mingw.
* win32-nat.c: Only include cygwin.h on Cygwin host. Don't
include procfs.h.
(cygwin_load_start, cygwin_load_end, cygwin_exceptions): Disable
if not building on Cygwin.
(win32_make_so, handle_output_debug_string, handle_exception)
(do_initial_win32_stuff): Wrap Cygwin specific code in __CYGWIN__.
(win32_attach): Only fallback to Cygwin pids if building on
Cygwin.
(win32_pid_to_exec_file): Disable Cygwin specific code, if not
building on Cygwin.
(win32_create_inferior): Disable starting the inferior through a
shell, environment var processing and tty handling if not building
on Cygwin.
(cygwin_pid_to_str): Rename to ...
(win32_pid_to_str): ... this.
(init_win32_ops): Update use of win32_pid_to_str. Disable "shell"
and "cygwin-exceptions" commands if not building on Cygwin.
2007-10-16 Gaius Mulley <gaius@glam.ac.uk>
* m2-valprint.c (m2_print_array_contents): New function.
(m2_print_unbounded_array): New function.
(m2_print_array_contents): New function.
* m2-typeprint.c (m2_unbounded_array): New function.
(m2_is_unbounded_array): New function.
(m2_print_type): Test for unbounded array when walking
across structs.
* m2-lang.h: Added extern m2_is_unbounded_array.
* m2-lang.c (evaluate_subexp_modula2): New function.
(exp_descriptor_modula2): New structure.
(m2_language_defn): Use exp_descriptor_modula2.
* m2-exp.y: Added TSIZE and binary subscript.
2007-10-16 Daniel Jacobowitz <dan@codesourcery.com>
* mi/mi-main.c (captured_mi_execute_command): Clear mi_error_message
after freeing it.
2007-10-16 Kevin Buettner <kevinb@redhat.com>
* m32r-tdep.c (decode_prologue): Sign extend offset for
"addi sp, xx" case.
(m32r_frame_unwind_cache): Likewise.
2007-10-15 Thiago Jung Bauermann <bauerman@br.ibm.com>
* rs6000-tdep.c (skip_prologue): Restore comment with
function description to its proper place.
2007-10-15 Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Mention gdbserver PowerPC improvements.
2007-10-15 Daniel Jacobowitz <dan@codesourcery.com>
* features/Makefile (WHICH): Add PowerPC register definitions.
(rs6000/powerpc-32-expedite, rs6000/powerpc-e500-expedite)
(rs6000/powerpc-64-expedite): New macros.
($(outdir)/%.dat): Handle subdirectories.
* regformats/rs6000/powerpc-32.dat, regformats/rs6000/powerpc-64.dat,
regformats/rs6000/powerpc-e500.dat: New generated files.
2007-10-15 Daniel Jacobowitz <dan@codesourcery.com>
* ppc-linux-nat.c (ppc_linux_read_description): New.
(_initialize_ppc_linux_nat): Set to_read_description.
* ppc-tdep.h (tdesc_powerpc_e500): Declare.
2007-10-15 Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Document target described register support for PowerPC.
* ppc-tdep.h: Remove ppc_spr constants.
(struct gdbarch_tdep): Remove regs, ppc_sr0_regnum, and
ppc_builtin_type_vec128 members.
(PPC_R0_REGNUM, PPC_F0_REGNUM, PPC_PC_REGNUM, PPC_MSR_REGNUM)
(PPC_CR_REGNUM, PPC_LR_REGNUM, PPC_CTR_REGNUM, PPC_XER_REGNUM)
(PPC_FPSCR_REGNUM, PPC_MQ_REGNUM, PPC_SPE_UPPER_GP0_REGNUM)
(PPC_SPE_ACC_REGNUM, PPC_SPE_FSCR_REGNUM, PPC_VR0_REGNUM)
(PPC_VSCR_REGNUM, PPC_VRSAVE_REGNUM, PPC_NUM_REGS): New constants.
* rs6000-tdep.c: Include preparsed descriptions.
(init_sim_regno_table): Do not iterate over pseudo registers.
Look up segment registers by name. Use sim_spr_register_name
for SPRs.
(rs6000_register_sim_regno): Call init_sim_regno_table here.
(rs6000_builtin_type_vec128): Delete.
(rs6000_register_name): Only handle SPE pseudo registers and upper
halves. Call tdesc_register_name for everything else.
(rs6000_register_type): Delete. Replace with...
(rs6000_pseudo_register_type): ...this new function. Only handle
SPE pseudo registers.
(rs6000_register_reggroup_p): Delete. Replace with...
(rs6000_pseudo_register_reggroup_p): ...this new function. Only
handle SPE pseudo registers.
(rs6000_convert_register_p): Use ppc_fp0_regnum instead of
"struct reg".
(rs6000_register_to_value, rs6000_value_to_register): Remove check
of reg->fpr.
(e500_register_reggroup_p): Delete.
(STR, R, R4, R8, R16, F, P8, R32, R64, R0, A4, S, S4, SN4, S64)
(COMMON_UISA_REGS, PPC_UISA_SPRS, PPC_UISA_NOFP_SPRS)
(PPC_SEGMENT_REGS, PPC_OEA_SPRS, PPC_ALTIVEC_REGS, PPC_SPE_GP_REGS)
(PPC_SPE_UPPER_GP_REGS, PPC_EV_PSEUDO_REGS): Delete macros.
(registers_powerpc, registers_403, registers_403GC, registers_505)
(registers_860, registers_601, registers_602, registers_603)
(registers_604, registers_750, registers_7400, registers_e500): Delete
variables.
(struct variant): Delete nregs, npregs, num_tot_regs, and regs. Add
tdesc.
(tot_num_registers, num_registers, num_pseudo_registers): Delete.
(variants): Delete outdated comment. Use standard target descriptions
instead of "struct reg" arrays.
(init_variants): Delete.
(rs6000_gdbarch_init): Do not guess word size from the BFD
architecture if we have a target description. Select a variant
before creating a new architecture. Use the variant's target
description if the target did not define a register layout.
Validate target-supplied registers. Reject mismatches. Use
fixed register numbers and new constants instead of magic
numbers. Call set_gdbarch_ps_regnum. Call tdesc_use_registers.
(_initialize_rs6000_tdep): Initialize the preparsed target
descriptions.
* target-descriptions.c (tdesc_predefined_types): Add int128 and
uint128.
(tdesc_find_register_early): New function.
(tdesc_numbered_register): Use it.
(tdesc_register_size): New function.
(tdesc_use_registers): Take a target_desc argument. Do not use
gdbarch_target_desc.
* target-descriptions.h (tdesc_use_registers): Update prototype
and comment.
(tdesc_register_size): New prototype.
* Makefile.in (powerpc_32_c, powerpc_403_c, powerpc_403gc_c)
(powerpc_505_c, powerpc_601_c, powerpc_602_c, powerpc_603_c)
(powerpc_604_c, powerpc_64_c, powerpc_7400_c, powerpc_750_c)
(powerpc_860_c, powerpc_e500_c, rs6000_c): New macros.
(rs6000-tdep.o): Update.
* arm-tdep.c (arm_gdbarch_init): Update call to tdesc_use_registers.
* m68k-tdep.c (m68k_gdbarch_init): Likewise.
* mips-tdep.c (mips_gdbarch_init): Likewise.
2007-10-15 Daniel Jacobowitz <dan@codesourcery.com>
* features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c: New
generated files.
2007-10-15 Daniel Jacobowitz <dan@codesourcery.com>
* features/rs6000/power-altivec.xml, features/rs6000/power-core.xml,
features/rs6000/power-fpu.xml, features/rs6000/power-oea.xml,
features/rs6000/power-spe.xml, features/rs6000/power64-core.xml: New
feature descriptions for standard PowerPC register sets.
* features/rs6000/powerpc-32.xml, features/rs6000/powerpc-403.xml,
features/rs6000/powerpc-403gc.xml, features/rs6000/powerpc-505.xml,
features/rs6000/powerpc-601.xml, features/rs6000/powerpc-602.xml,
features/rs6000/powerpc-603.xml, features/rs6000/powerpc-604.xml,
features/rs6000/powerpc-64.xml, features/rs6000/powerpc-7400.xml,
features/rs6000/powerpc-750.xml, features/rs6000/powerpc-860.xml,
features/rs6000/powerpc-e500.xml, features/rs6000/rs6000.xml: New
target descriptions for PowerPC processors.
2007-10-15 Daniel Jacobowitz <dan@codesourcery.com>
* target-descriptions.c (tdesc_predefined_types): New.
(tdesc_named_type): Use it.
(tdesc_type_id, maint_print_c_tdesc_cmd): New functions.
(_intialize_target_descriptions): Register "maint print c-tdesc".
* features/Makefile (XMLTOC, CFILES, GDB): New macros.
(cfiles, %.c): New rules.
* features/arm-with-iwmmxt.c, features/mips-linux.c,
features/mips64-linux.c: New generated files.
* arm-linux-nat.c: Include preparsed description instead of
"xml-support.h".
(super_xfer_partial, arm_linux_xfer_partial): Remove.
(arm_linux_read_description): New function.
(_initialize_arm_linux_nat): Set to_read_description instead of
to_xfer_partial. Initialize preparsed description.
* config/arm/linux.mh (TDEP_XML): Delete.
* mips-linux-nat.c: Include preparsed descriptions instead of
"xml-support.h".
(super_xfer_partial, mips_linux_xfer_partial): Remove.
(mips_linux_read_description): New function.
(_initialize_mips_linux_nat): Set to_read_description instead of
to_xfer_partial. Initialize preparsed description.
* config/mips/linux.mh (TDEP_XML): Delete.
* Makefile.in (XMLFILES): Remove $(TDEP_XML).
(features_headers, arm_with_iwmmxt_c, mips_linux_c)
(mips64_linux_c): New macros.
(arm-linux-nat.o, mips-linux-nat.o): Update.
2007-10-15 Pierre Muller <muller@ics.u-strasbg.fr>
* cp-abi.c (set_cp_abi_as_auto_default): ARI fix:
Replace xasprintf by xstrprintf.
symfile-mem.c (add_vsyscall_page): Ditto.
2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
* ia64-linux-nat.c (ia64_register_addr): Add gdbarch parameter,
replacing use of global current_gdbarch.
(ia64_cannot_fetch_register, ia64_cannot_store_register): Likewise.
(ia64_linux_fetch_register, ia64_linux_store_register): Update callers.
* ia64-tdep.c (SIGCONTEXT_REGISTER_ADDRESS): Remove macro.
(ia64_sigtramp_frame_init_saved_regs): Add next_frame parameter,
replace uses of SIGCONTEXT_REGISTER_ADDRESS.
(ia64_sigtramp_frame_cache): Update caller.
2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
* gdbarch.sh (deprecated_use_struct_convention): Remove.
(extract_return_value, store_return_value): Remove.
(return_value): Remove default implementation.
* gdbarch.c, gdbarch.h: Regenerate.
* stack.c (return_command): Remove compatibility hack.
* arch-utils.c (legacy_return_value): Remove.
* arch-utils.h (legacy_return_value): Likewise.
* arch-utils.c (always_use_struct_convention): Remove.
* arch-utils.h (always_use_struct_convention): Likewise.
* value.c (generic_use_struct_convention): Remove.
* defs.h (generic_use_struct_convention): Likewise.
2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
* avr-tdep.c (avr_return_value): New function.
(avr_gdbarch_init): Call set_gdbarch_return_value instead of
set_gdbarch_extract_return_value.
* fvr-tdep.c (frv_return_value): New function.
(frv_gdbarch_init): Call set_gdbarch_return_value instead of
set_gdbarch_extract_return_value, set_gdbarch_store_return_value,
and set_gdbarch_deprecated_use_struct_convention.
* ia64-tdep.c (ia64_use_struct_convention): Make static.
Add check for structure, union, or array types.
(ia64_extract_return_value): Make static.
(ia64_store_return_value): Make static. Support multi-word values.
(ia64_return_value): New function.
(ia64_gdbarch_init): Call set_gdbarch_return_value instead of
set_gdbarch_extract_return_value, set_gdbarch_store_return_value,
and set_gdbarch_deprecated_use_struct_convention.
2007-10-12 Joel Brobecker <brobecker@adacore.com>
* solib-target.c (solib_target_parse_libraries)
[HAVEHAVE_LIBEXPAT not defined]: Fix thinko in return type.
2007-10-12 Jim Blandy <jimb@codesourcery.com>
* serial.h (struct serial_ops): Document read_prim to return zero
at EOF.
* ser-base.c (do_ser_base_readchar): Return SERIAL_EOF when
read_prim returns zero, not SERIAL_TIMEOUT.
2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
* alpha-mdebug-tdep.c: Include "gdb_string.h".
(find_proc_desc): Add fix-up code for setjmp procedure descriptor.
* mdebugread.c (parse_procedure): Remove setjmp fix-up code.
* Makefile.in (alpha-mdebug-tdep.o): Update dependencies.
* config/alpha/alpha.mt (DEPRECATED_TM_FILE): Remove.
* config/alpha/alpha-linux.mt (DEPRECATED_TM_FILE): Remove.
* config/alpha/alpha-osf1.mt (DEPRECATED_TM_FILE): Remove.
* config/alpha/fbsd.mt (DEPRECATED_TM_FILE): Remove.
* config/alpha/tm-alpha.h: Remove file.
2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
* breakpoint.c (breakpoint_sals_to_pc): Do not check for
DEPRECATED_PC_REQUIRES_RUN_BEFORE_USE.
* config/pa/tm-hppa.h: Delete file.
* config/pa/hppa64.mt: Do not set DEPRECATED_TM_FILE.
* config/pa/hppahpux.mt: Likewise.
* config/pa/hppa.mt: Likewise.
* config/pa/linux.mt: Likewise.
* hppa-tdep.c (hppa_pc_requires_run_before_use): Delete.
2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
* config/arm/nm-nbsdaout.h: Remove file.
* config/nm-nbsdaout.h: Likewise.
* config/nm-nbsd.h: Likewise.
2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
* block.h (struct block): Remove "gcc_compile_flag" member.
(BLOCK_GCC_COMPILED): Remove.
* block.c (allocate_block): Do not clear BLOCK_GCC_COMPILED.
* buildsym.c (finish_block): Do not set it.
* symmisc.c (dump_symtab_1): Do not dump it.
* value.h (using_struct_return): Remove "gcc_p" argument.
* value.c (using_struct_return): Likewise.
* eval.c (evaluate_subexp_standard): Adapt callers.
* infcall.c (call_function_by_hand): Likewise.
* stack.c (return_command): Likewise.
* sparc-tdep.c (sparc32_push_dummy_code): Likewise.
* gdbarch.sh (push_dummy_code): Remove "using_gcc" parameter.
* gdbarch.c, gdbarch.h: Regenerate.
* cris-tdep.c (cris_push_dummy_code): Adapt prototype.
* hppa-hpux-tdep.c (hppa_hpux_push_dummy_code): Likewise.
* sparc-tdep.c (sparc32_push_dummy_code): Likewise.
* infcall.c (generic_push_dummy_code, push_dummy_code): Likewise.
(push_dummy_code, call_function_by_hand): Adapt callers.
2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
* infcmd.c (print_return_value): Remove STRUCT_RETURN argument.
(finish_command_continuation, finish_command): Adapt callers.
2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
* infcall.c (call_function_by_hand): Remove special handling
for HP aCC compiled code.
2007-10-12 Ulrich Weigand <uweigand@de.ibm.com>
* cris-tdep.c (cris_push_dummy_call): Support arguments passed by
reference. Fix endianness bugs.
(cris_reg_struct_has_address): Remove.
(cris_gdbarch_init): Remove set_gdbarch_deprecated_reg_struct_has_addr
and set_gdbarch_deprecated_use_struct_convention calls.
* gdbarch.sh (deprecated_reg_struct_has_addr): Remove.
* gdbarch.c, gdbarch.h: Regenerate.
* infcall.c (call_function_by_hand): Remove handling of
deprecated_reg_struct_has_addr.
2007-10-11 Daniel Jacobowitz <dan@codesourcery.com>
Kazu Hirata <kazu@codesourcery.com>
* breakpoint.c (do_enable_breakpoint): Delay enabling until after
checking watchpoint resources.
2007-10-11 Kazu Hirata <kazu@codesourcery.com>
* memattr.c (inaccessible_by_default): Change the initial
value to 1.
2007-10-11 Daniel Jacobowitz <dan@codesourcery.com>
PR gdb/2280
* coffread.c (read_one_sym): Check for read errors.
2007-10-11 Ulrich Weigand <uweigand@de.ibm.com>
* linux-nat.c (lin_lwp_attach_lwp): Use "Linux kernel 2.6.19"
instead of "Linux 2.6.19" in comment.
(linux_xfer_partial): Use "GNU/Linux target" instead of
"Linux target" in comment.
* m68klinux-tdep.c (m68k_linux_inferior_created): Likewise.
(m68k_linux_get_sigtramp_info): Likewise.
2007-10-11 Daniel Jacobowitz <dan@codesourcery.com>
* MAINTAINERS (language support): List Joel and Paul as
Ada maintainers.
2007-10-11 Daniel Jacobowitz <dan@codesourcery.com>
* dbxread.c (process_one_symbol): Remove VARIABLES_INSIDE_BLOCK
checks.
* config/arm/embed.mt, config/arm/linux.mt, config/arm/wince.mt: Do
not set DEPRECATED_TM_FILE.
* config/arm/tm-arm.h: Delete file.
2007-10-11 Luis Machado <luisgpm@br.ibm.com>
* MAINTAINERS (Write After Approval): Add self.
2007-10-11 Daniel Jacobowitz <dan@codesourcery.com>
* buildsym.c (record_line): Remove empty lines followed by
end-of-sequence markers.
2007-10-11 Kazu Hirata <kazu@codesourcery.com>
* configure.tgt: Recognize fido-*-elf.
2007-10-10 Joel Brobecker <brobecker@adacore.com>
GDB 6.7 released.
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* stack.c (print_frame_args, frame_info, return_command): Use
get_regcache_arch or get_frame_arch to get at the current architecture
by regcache or by frame, respectively.
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* rs6000-nat.c (fetch_register, store_register)
(rs6000_fetch_inferior_registers, rs6000_store_inferior_registers): Use
get_regcache_arch to get at the current architecture by regcache.
* rs6000-tdep.c (rs6000_push_dummy_call, rs6000_return_value)
(rs6000_register_reggroup_p, e500_move_ev_registe, rs6000_unwind_pc)
(rs6000_unwind_dummy_id, rs6000_frame_cache, rs6000_dump_tdep): Replace
current_gdbarch by gdbarch.
(rs6000_skip_trampoline_code, rs6000_register_to_value)
(rs6000_value_to_register): Use get_frame_arch to get at the current
architecture by frame_info.
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* sparc-tdep.c (sparc_supply_rwindow, sparc_collect_rwindow): Use
get_regcache_arch to get at the current architecture by regcache.
* sparc64-tdep.c (sparc64_supply_gregset, sparc64_collect_gregset)
(sparc64_supply_fpregset, sparc64_collect_fpregset): Use
get_regcache_arch to get at the current architecture by regcache.
* sparc64nbsd-nat. (sparc64nbsd_supply_gregset)
(sparc64nbsd_collect_gregset, sparc64nbsd_supply_fpregset)
(sparc64nbsd_collect_fpregset): Use get_regcache_arch to get at the
current architecture by regcache.
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* remote-mips.c (mips_wait, mips_fetch_registers)
(mips_store_registers): Use get_regcache_arch to get at the
current architecture by regcache.
* mipsnbsd-tdep.c (mipsnbsd_supply_reg, mipsnbsd_fill_reg)
(mipsnbsd_supply_fpreg, mipsnbsd_fill_fpreg): Use get_regcache_arch to
get at the current architecture by regcache.
(mipsnbsd_sigtramp_offset): Use get_frame_arch to get at the current
architecture by frame_info.
* mipsnbsd-nat.c (mipsnbsd_fetch_inferior_registers)
(mipsnbsd_store_inferior_registers): Use get_regcache_arch to get at
the current architecture by regcache.
* mips-linux-tdep.c (mips_linux_get_longjmp_target)
(mips64_linux_get_longjmp_target, mips_linux_o32_sigframe_init)
(mips_linux_n32n64_sigframe_init): Use get_frame_arch to get at the
current architecture by frame_info.
(supply_32bit_reg, mips_supply_gregset, mips_fill_gregset)
(mips_supply_fpregset, mips_fill_fpregset, supply_64bit_reg)
(mips64_supply_gregset, mips64_fill_gregset, mips64_supply_fpregset)
(mips64_fill_fpregset, mips_linux_write_pc): Use get_regcache_arch to
get at the current architecture by regcache.
* mips-linux-nat.c (mips_linux_register_addr)
(mips64_linux_register_addr): Replace current_gdbarch by gdbarch.
(supply_gregset, fill_gregset, supply_fpregset, fill_fpregset)
(mips64_linux_regsets_fetch_registers)
(mips64_linux_regsets_store_registers): Use get_regcache_arch to get at
the current architecture by regcache.
* mips64obsd-tdep.c (mips64obsd_sigframe_init): Use get_frame_arch to
get at the current architecture by frame_info.
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* mips-tdep.c (mips_xfer_register): Use get_regcache_arch to get at the
current architecture by regcache.
(mips2_fp_compat, mips32_next_pc, mips16_scan_prologue)
(mips_insn16_frame_cache, mips32_scan_prologue, mips_insn32_frame_cache)
(mips_stub_frame_cache, mips_read_fp_register_single)
(mips_read_fp_register_double, mips_print_fp_register)
(mips_print_register, print_gp_register_row): Use get_frame_arch to get
at the current architecture by frame_info.
(mips_register_reggroup_p, mips_pseudo_register_read, mips_unwind_sp)
(mips_pseudo_register_write, mips_register_type, mips_unwind_pc)
(mips_unwind_dummy_id, mips_eabi_push_dummy_call)
(mips_n32n64_push_dummy_call, mips_n32n64_return_value)
(mips_o32_push_dummy_call, mips_o32_return_value)
(mips_o64_push_dummy_call, mips_o64_return_value)
(mips_print_registers_info, mips_dump_tdep): Replace current_gdbarch by
gdbarch.
2007-10-10 Markus Deuling <deuling@de.ibm.com>
* xtensa-tdep.c (xtensa_register_type, xtensa_pseudo_register_read)
(xtensa_pseudo_register_write, xtensa_register_reggroup_p)
(xtensa_unwind_pc, xtensa_unwind_dummy_id, xtensa_push_dummy_call)
(xtensa_dump_tdep): Replace current_gdbarch by gdbarch.
(xtensa_register_write_masked, xtensa_register_read_masked)
(xtensa_supply_gregset, xtensa_store_return_value)
(xtensa_extract_return_value): Use get_regcache_arch to get at the
current architecture by regcache.
(xtensa_frame_cache, call0_frame_get_reg_at_entry, call0_frame_cache)
(xtensa_frame_prev_register): Use get_frame_arch to get at the current
architecture by frame_info.
2007-10-10 Daniel Jacobowitz <dan@codesourcery.com>
* arm-tdep.c (struct arm_prologue_cache): Remove frameoffset.
(thumb_analyze_prologue): Move pv_area_store_would_trash call
out of loop. Do not set cache->frameoffset.
(arm_scan_prologue): Use prologue-value mechanism. Do not set
frameoffset. Simplify framesize.
(arm_make_prologue_cache, arm_normal_frame_base): Do not use
frameoffset.
* arm-tdep.h (enum gdb_regnum): Add ARM_IP_REGNUM.
2007-10-10 Daniel Jacobowitz <dan@codesourcery.com>
* target.c (update_current_target): Call setup_target_debug.
(push_target): Do not call it here.
2007-10-09 Michael Snyder <msnyder@specifix.com>
* MAINTAINERS: Update my email address.
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* xtensa-tdep.c: Replace following current-gdbarch based macros by
their expression:
(xtensa_pseudo_register_read)
(xtensa_pseudo_register_write): XTENSA_TARGET_FLAGS.
(ARG_NOF, ARG_1ST, xtensa_extract_return_value)
(xtensa_store_return_value, xtensa_push_dummy_call): CALL_ABI.
(xtensa_pseudo_register_read)
(xtensa_pseudo_register_write): ISA_USE_WINDOWED_REGISTERS.
(xtensa_breakpoint_from_pc): ISA_USE_DENSITY_INSTRUCTIONS.
(xtensa_register_type, xtensa_supply_gregset, xtensa_frame_cache)
(xtensa_frame_prev_register): NUM_AREGS.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write,
(xtensa_supply_gregset, xtensa_frame_cache, xtensa_frame_prev_register,
(xtensa_extract_return_value, xtensa_store_return_value): WB_REGNUM.
(xtensa_supply_gregset, xtensa_frame_cache)
(xtensa_frame_prev_register): WS_REGNUM.
(xtensa_supply_gregset): LBEG_REGNUM, LEND_REGNUM, LCOUNT_REGNUM,
SAR_REGNUM, EXCCAUSE_REGNUM, EXCVADDR_REGNUM
(xtensa_register_name, xtensa_register_type, xtensa_reg_to_regnum)
(xtensa_pseudo_register_read, xtensa_pseudo_register_write)
(xtensa_register_reggroup_p): REGMAP.
(call0_track_op): LITBASE_REGNUM.
(xtensa_register_type, xtensa_reg_to_regnum, call0_frame_cache):A0_BASE
(xtensa_supply_gregset, call0_frame_get_reg_at_entry)
(xtensa_frame_prev_register, AREG_NUMBER)
(xtensa_register_type): AR_BASE.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write): FP_ALIAS.
(AREG_NUMBER): AREGS_MASK, WB_MASK, A0_REGNUM.
(ARG_1ST, xtensa_pseudo_register_read, xtensa_pseudo_register_write)
(xtensa_frame_cache, xtensa_frame_prev_register)
(xtensa_extract_return_value, xtensa_store_return_value)
(xtensa_push_dummy_call, call0_frame_cache): A0_REGNUM.
(xtensa_register_type, xtensa_pseudo_register_read, xtensa_frame_cache)
(xtensa_pseudo_register_write, xtensa_unwind_dummy_id)
(xtensa_frame_prev_register, xtensa_push_dummy_call)
(call0_frame_cache): A1_REGNUM.
(xtensa_extract_return_value, xtensa_store_return_value): A2_REGNUM.
(xtensa_push_dummy_call): A4_REGNUM.
(ARGS_FIRST_REG): A6_REGNUM.
(xtensa_pseudo_register_read, xtensa_pseudo_register_write)
(xtensa_frame_prev_register): A15_REGNUM.
* xtensa-tdep.h: Delete current_gdbarch based macros after replacing
them in the appropriate source file:
XTENSA_TARGET_FLAGS, SPILL_LOCATION, SPILL_SIZE, CALL_ABI, NUM_AREGS,
ISA_USE_WINDOWED_REGISTERS, ISA_USE_DENSITY_INSTRUCTIONS, WB_REGNUM,
ISA_USE_EXCEPTIONS, ISA_USE_EXT_L32R, DEBUG_DATA_VADDR_TRAP_COUNT,
DEBUG_INST_VADDR_TRAP_COUNT, ISA_MAX_INSN_SIZE, DEBUG_NUM_IBREAKS,
DEBUG_NUM_DBREAKS, WS_REGNUM, LBEG_REGNUM, LEND_REGNUM, SAR_REGNUM,
REGMAP, LITBASE_REGNUM, DEBUGCAUSE_REGNUM, EXCCAUSE_REGNUM, AR_BASE,
EXCVADDR_REGNUM, NUM_IBREAKS, REGMAP_BYTES, NUM_CONTEXTS, FP_ALIAS,
FP_LAYOUT, FP_LAYOUT_BYTES, GREGMAP, AREGS_MASK, WB_MASK, A0_REGNUM,
A1_REGNUM, A2_REGNUM, A3_REGNUM, A4_REGNUM, A5_REGNUM, A6_REGNUM,
A7_REGNUM, A8_REGNUM, A9_REGNUM, A10_REGNUM, A11_REGNUM, A12_REGNUM,
A13_REGNUM, A14_REGNUM, A15_REGNUM.
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* h8300-tdep.c (h8300_frame_cache): Use get_frame_arch to get at
the current architecture by frame_info.
(h8300_frame_prev_register
(h8300_print_register): Replace current_gdbarch by gdbarch.
(h8300_print_registers_info, h8300_register_type)
(h8300_register_type): Likewise.
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* i386-linux-nat.c (fetch_register): Use get_regcache_arch to get at
the current architecture by regcache.
(store_register, supply_gregset, fill_gregset, i386_linux_resume)
(i386_linux_fetch_inferior_registers)
(i386_linux_store_inferior_registers): Likewise.
* i386gnu-nat.c (gnu_fetch_registers, gnu_store_registers): Likewise.
* i386-nto-tdep.c (i386nto_supply_gregset): Likewise.
* i386v4-nat.c (supply_fpregset, fill_fpregset): Likewise.
* i386-tdep.c (i386_unwind_pc): Replace current_gdbarch by gdbarch.
(i386_extract_return_value, i386_store_return_value): Likewise.
* i386-tdep.c (i386_frame_prev_register): Use get_frame_arch to get at
the current architecture by frame_info.
(i386_sigtramp_frame_cache, i386_get_longjmp_target)
(i386_register_to_value, i386_value_to_register): Likewise.
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* monitor.c (monitor_supply_register): Use get_regcache_arch to get at
the current architecture by regcache.
(monitor_store_register, monitor_store_registers): Likewise.
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* dbug-rom.c (dbug_supply_register): Use get_regcache_arch to get at
the current architecture by regcache.
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* arch-utils.c (legacy_return_value): Replace current_gdbarch by
gdbarch.
2007-10-09 Markus Deuling <deuling@de.ibm.com>
* frame.c (frame_pc_unwind): Use get_frame_arch to get at the current
architecture by frame.
(frame_save_as_regcache, frame_register_unwind, get_prev_frame_1)
(inside_main_func, frame_sp_unwind): Likewise.
2007-10-09 Daniel Jacobowitz <dan@codesourcery.com>
* solib-svr4.c (enable_break): Add the dynamic linker also if
auxv succeeds.
2007-10-09 Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
* MAINTAINERS (Write After Approval): Add self.
2007-10-09 Pedro Alves <pedro_alves@portugalmail.pt>
* stabsread.c (read_huge_number): Initialize local variable to 0.
2007-10-09 Pierre Muller <muller@ics.u-strasbg.fr>
* p-lang.h (pascal_main_name): Add declaration.
* p-lang.c (GPC_P_INITIALIZE, GPC_MAIN_PROGRAM_NAME_1)
(GPC_MAIN_PROGRAM_NAME_2): New constants.
(pascal_main_name): New function.
* symtab.c: Include p-lang.h.
(find_main_name): Add call to pascal_main_name.
* Makefile.in (symtab.o): Add dependency on p-lang.h.
2007-10-09 Pedro Alves <pedro_alves@portugalmail.pt>
* stabsread.c (read_huge_number): Fix handling of octal
representation when the bit width is known.
(read_range_type): Record unsigned integral types with their size,
when the type size is known.
2007-10-08 Thiago Jung Bauermann <bauerman@br.ibm.com>
* MAINTAINERS (Write After Approval): Add self.
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
* breakpoint.c (print_one_breakpoint_location): ARI fix:
Replace asprintf by xstrprintf.
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
* linux-fork.c: ARI fix: include "gdb_dirent.h" instead of <dirent.h>.
Makefile.in (linux-fork.o): Add gdb_dirent.h dependency.
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
* linux-fork.c: Move "gdb_wait.h" include back to the position of
<sys/wait.h> include before last commit.
2007-10-08 Maciej W. Rozycki <macro@mips.com>
* mips-tdep.c (mips32_next_pc): Fix a typo in BGTZL.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* aix-thread.c (supply_gprs64, supply_fprs, supply_sprs64)
(supply_sprs32, fetch_regs_user_thread, fetch_regs_kernel_thread)
(fill_gprs64, fill_gprs32, fill_fprs, fill_sprs64, fill_sprs32)
(store_regs_user_thread, store_regs_kernel_thread): Use
get_regcache_arch or get_frame_arch to get at the current architecture
by regcache or by frame, respectively.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* sh64-tdep.c (sh64_push_dummy_call, sh64_register_type)
(sh64_pseudo_register_read, sh64_pseudo_register_write)
(sh64_do_fp_register, sh64_do_pseudo_register, sh64_do_register)
(sh64_print_register, sh64_media_print_registers_info)
(sh64_compact_print_registers_info, sh64_unwind_sp)
(sh64_unwind_pc): Replace current_gdbarch by gdbarch.
(sh64_show_media_regs, sh64_show_compact_regs, sh64_frame_cache)
(sh64_frame_prev_register): Use FRAME to recognize current
architecture.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* sh-tdep.c (sh_push_dummy_call_fpu, sh_push_dummy_call_nofpu)
(sh_sh2a_register_type, sh_sh3e_register_type, sh_sh4_register_type)
(sh_register_reggroup_p, sh_dwarf2_frame_init_reg): Replace
current_gdbarch by gdbarch.
(sh_generic_show_regs, sh3_show_reg, sh2e_show_regs, sh2a_show_regs)
(sh2a_nofpu_show_regs, sh3e_show_regs, sh3_dsp_show_regs)
(sh4_show_regs, sh4_nofpu_show_regs, sh_dsp_show_regs, sh_frame_cache)
(sh_frame_prev_register, sh_unwind_sp, sh_unwind_pc): Use FRAME to
recognize current architecture.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* remote.c (init_remote_state, fetch_register_using_p)
(process_g_packet, remote_fetch_registers, remote_prepare_to_store)
(store_register_using_P, store_registers_using_G)
(remote_store_registers): Use get_regcache_arch or get_frame_arch to
get at the current architecture by regcache or by frame, respectively.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* m68k-tdep.c (m68k_register_to_value, m68k_value_to_register)
(m68k_svr4_extract_return_value, m68k_svr4_store_return_value)
(m68k_frame_prev_register, m68k_get_longjmp_target): Use
get_regcache_arch or get_frame_arch to get at the current architecture
by regcache or by frame, respectively.
* m68klinux-tdep.c (m68k_linux_sigtramp_frame_cache): Likewise.
* m68klinux-nat.c (fetch_register, old_fetch_inferior_registers)
(store_register, old_store_inferior_registers, supply_gregset)
(supply_fpregset, fill_fpregset): Likewise.
* m68k-tdep.c (m68k_register_type, m68k_unwind_pc, m68k_dump_tdep):
Replace current_gdbarch by gdbarch.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* irix5-nat.c (supply_gregset, fill_gregset, supply_fpregset)
(fill_fpregset, fetch_core_registers): Use get_regcache_arch or
get_frame_arch to get at the current architecture by regcache or by
frame, respectively.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* ia64-tdep.c (ia64_pseudo_register_read, ia64_pseudo_register_write):
Replace current_gdbarch by gdbarch.
* ia64-tdep.c (ia64_frame_prev_register
(ia64_sigtramp_frame_prev_register)
(ia64_libunwind_frame_prev_register): Use get_regcache_arch or
get_frame_arch to get at the current architecture by regcache or by
frame, respectively.
* ia64-linux-nat.c (ia64_linux_fetch_register)
(ia64_linux_fetch_registers, ia64_linux_store_register)
(ia64_linux_store_registers): Likewise.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* hppa-tdep.c (hppa_stub_unwind_sniffer, hppa_dump_tdep): Replace
current_gdbarch by gdbarch.
* hppa-linux-nat.c (fetch_register, store_register)
(hppa_linux_fetch_inferior_registers)
(hppa_linux_store_inferior_registers): Use get_regcache_arch or
get_frame_arch to get at the current architecture by regcache or by
frame, respectively.
* hppa-hpux-tdep.c (hppa_hpux_skip_trampoline_code
(hppa_hpux_unwind_adjust_stub): Likewise.
* hppa-hpux-nat.c (hppa_hpux_fetch_register, hppa_hpux_store_register)
(hppa_hpux_fetch_inferior_registers)
(hppa_hpux_store_inferior_registers): Likewise.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* cris-tdep.c (cris_sigcontext_addr, cris_sigtramp_frame_unwind_cache)
(cris_scan_prologue, crisv32_scan_prologue, find_step_target)
(cris_software_single_step, cris_supply_gregset): Use get_regcache_arch
or get_frame_arch to get at the current architecture by regcache or by
frame, respectively.
* cris-tdep.c (crisv32_single_step_through_delay, cris_push_dummy_call)
(cris_unwind_pc, cris_unwind_sp, cris_register_type, cris_dump_tdep)
(crisv32_register_type, cris_dwarf2_frame_init_reg): Replace
current_gdbarch by gdbarch.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* arm-tdep.c (arm_scan_prologue, arm_make_prologue_cache)
(thumb_get_next_pc, arm_get_next_pc, arm_extract_return_value)
(arm_store_return_value): Use get_regcache_arch or get_frame_arch to
get at the current architecture by regcache or by·frame, respectively.
(arm_push_dummy_call, arm_dump_tdep): Replace current_gdbarch by
gdbarch.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* amd64-tdep.c (amd64_frame_prev_register, amd64_sigtramp_frame_cache):
Use get_regcache_arch or get_frame_arch to get at the current
architecture by regcache or by frame, respectively.
* amd64-linux-tdep.c (amd64_linux_sigcontext_addr): Likewise.
* amd64-nat.c (amd64_supply_native_gregset)
(amd64_collect_native_gregset): Replace current_gdbarch by gdbarch.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* alpha-tdep.c (alpha_register_reggroup_p): Replace current_gdbarch by
gdbarch.
* alpha-linux-nat.c (alpha_linux_register_u_offset): Likewise.
(alpha_sigtramp_frame_unwind_cache, alpha_sigtramp_frame_this_id)
(alpha_sigtramp_frame_sniffer, alpha_next_pc): Use get_regcache_arch or
get_frame_arch to get at the current architecture by regcache or by
frame, respectively.
* alpha-nat.c (fetch_osf_core_registers): Likewise.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* dwarf2-frame.c (read_reg, execute_cfa_program, dwarf2_frame_cache)
(dwarf2_frame_default_init_reg, dwarf2_frame_prev_register): Replace
current_gdbarch by gdbarch.
* dwarf2loc.c (dwarf2_evaluate_loc_desc): Likewise.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* regcache.c (init_regcache_descr, register_type, read_pc_pid)
(write_pc_pid, regcache_dump): Replace current_gdbarch by gdbarch.
* regcache.c (regcache_raw_write): Use get_regcache_arch or
get_frame_arch to get at the current architecture by regcache or by
frame, respectively.
2007-10-08 Markus Deuling <deuling@de.ibm.com>
* findvar.c (value_of_register, locate_var_value): Use
get_regcache_arch or get_frame_arch to get at the current architecture
by regcache or by frame, respectively.
* findvar.c (default_value_from_register, value_from_register): Replace
current_gdbarch by gdbarch.
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
* config/i386/nm-i386.h (CHILD_POST_STARTUP_INFERIOR): ARI fix: Remove.
2007-10-08 Pierre Muller <muller@ics.u-strasbg.fr>
* linux-fork.c: ARI fix: include "gdb_wait.h" instead of <sys/wait.h>.
Makefile.in (linux-fork.o): Add gdb_wait.h dependency.
2007-10-05 Daniel Jacobowitz <dan@codesourcery.com>
* remote.c (get_offsets): Only call free_symfile_segment_data if
data was allocated.
2007-10-03 Pierre Muller <muller@ics.u-strasbg.fr>
* objc-exp.y: ARI fix: remove 4 PARAMS.
2007-10-03 Daniel Jacobowitz <dan@codesourcery.com>
* NEWS: Use uniform spacing. Correct version number for GDB 6.7
news. Mention XML support for M68K in GDB 6.7.
2007-10-03 Daniel Jacobowitz <dan@codesourcery.com>
* gdbtypes.c (create_range_type): Do not set TYPE_FIELD_TYPE for the
bounds.
(init_vector_type): Use builtin_type_int32.
2007-10-02 Ulrich Weigand <uweigand@de.ibm.com>
* s390-tdep.c (s390_regset_from_core_section): Allow excess section
size to enable bi-arch generate-core-file support.
2007-10-02 Markus Deuling <deuling@de.ibm.com>
* spu-tdep.c (info_spu_signal_command): Fix output for SPU signal.
2007-10-02 Carlos Eduardo Seo <cseo@linux.vnet.ibm.com>
* tui/tui-interp.c (tui_init): Initialize tui's SIGWINCH
signal handler.
* tui/tui-win.c (tui_initialize_win): New function for
initializing tui's SIGWINCH signal handler.
* tui/tui-win.h (tui_initialize_win): Declare.
2007-10-02 Ulrich Weigand <uweigand@de.ibm.com>
* ppc-linux-nat.c (ppc_linux_stopped_data_address): Cast
pointer to uintptr_t before casting to CORE_ADDR.
2007-10-02 Markus Deuling <deuling@de.ibm.com>
* linux-nat.c (PTRACE_GETSIGINFO): Add define.
2007-10-02 Mark Mitchell <mark@codesourcery.com>
* mingw-hdep.c (gdb_select): Stop helper threads before returning.
* ser-mingw.c (enum select_thread_state): New type.
(struct ser_console_state): Add have_started and thread_state.
(select_thread_wait): New function.
(thread_fn_type): New type.
(create_select_thread): New function.
(destroy_select_thread): Likewise.
(start_select_thread): Likewise.
(stop_select_thread): Likewise.
(console_select_thread): Use new functions.
(pipe_select_thread): Likewise.
(file_select_thread): Likewise.
(ser_console_wait_handle): Likewise.
(ser_console_done_wait_handle): Likewise.
(ser_console_close): Likewise.
(free_pipe_state): Likewise.
(pipe_wait_handle): Likewise.
(pipe_done_wait_handle): Likewise.
(struct net_windows_state): Derive from ser_console_state.
(net_windows_select_thread): Use new functions.
(net_windows_wait_handle): Likewise.
(net_windows_done_wait_handle): Likewise.
(net_windows_close): Likewise.
2007-10-02 Daniel Jacobowitz <dan@codesourcery.com>
* inflow.c (terminal_ours_1): Remove useless line.
2007-10-02 Daniel Jacobowitz <dan@codesourcery.com>
* mips-tdep.c (mips_read_fp_register_double): Correct check for
odd FP registers.
(mips_print_fp_register): Correct check for even FP registers.
(mips_virtual_frame_pointer): New function.
(mips_gdbarch_init): Call set_gdbarch_virtual_frame_pointer.
2007-09-30 Mike Frysinger <vapier@gentoo.org>
* value.h (lookup_only_internalvar): New prototype.
(create_internalvar): Likewise.
* value.c (lookup_only_internalvar): New function.
(create_internalvar): Likewise.
(lookup_internalvar): Use new lookup_only_internalvar and
create_internalvar functions.
* parse.c (write_dollar_variable): Look up $ symbols in internal
table first rather than last.
2007-09-30 Daniel Jacobowitz <dan@codesourcery.com>
* linux-nat.c (linux_nat_new_thread): New variable.
(linux_child_follow_fork): Set inferior_ptid to include LWP ID. Use
linux_nat_switch_fork.
(lwp_list): Make public.
(add_lwp): Call linux_nat_new_thread.
(lin_lwp_attach_lwp, linux_nat_attach): Call add_lwp after stopping
the new thread.
(resume_callback): Clear lp->siginfo. Remove unused variable.
(linux_nat_resume): Assert that the LWP list is already initialized.
Clear lp->siginfo.
(save_siginfo): New.
(stop_wait_callback, linux_nat_wait): Call it.
(linux_nat_set_new_thread, linux_nat_get_siginfo): New.
* linux-nat.h (struct lwp_info): Add siginfo.
(lwp_list, linux_nat_set_new_thread, linux_nat_get_siginfo): Declare.
(ALL_LWPS): Define.
* amd64-linux-nat.c (amd64_linux_dr): New.
(amd64_linux_dr_get): Take a PTID argument. Correct typo.
(amd64_linux_dr_set): Take a PTID argument.
(amd64_linux_dr_set_control, amd64_linux_dr_set_addr): Use ALL_LWPS.
(amd64_linux_dr_reset_addr): Use amd64_linux_dr_set_addr.
(amd64_linux_dr_get_status): Pass inferior_ptid to amd64_linux_dr_get.
(amd64_linux_new_thread): New.
(_initialize_amd64_linux_nat): Call linux_nat_set_new_thread.
* i386-linux-nat.c (i386_linux_dr): New.
(i386_linux_dr_get, i386_linux_dr_set): Take a PTID argument.
(i386_linux_dr_set_control, i386_linux_dr_set_addr): Use ALL_LWPS.
(i386_linux_dr_reset_addr): Use i386_linux_dr_set_addr.
(i386_linux_dr_get_status): Pass inferior_ptid to i386_linux_dr_get.
(i386_linux_new_thread): New.
(i386_linux_resume): Remove unnecessary PID check.
(_initialize_i386_linux_nat): Call linux_nat_set_new_thread.
* ia64-linux-nat.c (enable_watchpoints_in_psr): Take PTID argument.
(fetch_debug_register, fetch_debug_register_pair): Delete.
(debug_registers): New.
(ia64_linux_insert_watchpoint, ia64_linux_remove_watchpoint): Use
ALL_LWPS and debug_registers.
(ia64_linux_new_thread): New.
(ia64_linux_stopped_data_address): Use linux_nat_get_siginfo.
(_initialize_ia64_linux_nat): Call linux_nat_set_new_thread.
* ppc-linux-nat.c (last_stopped_data_address): Delete.
(saved_dabr_value): New.
(ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use
ALL_LWPS.
(ppc_linux_new_thread): New.
(ppc_linux_stopped_data_address): Use linux_nat_get_siginfo.
(ppc_linux_stopped_by_watchpoint): Call ppc_linux_stopped_data_address.
(_initialize_ppc_linux_nat): Call linux_nat_set_new_thread.
* s390-nat.c (s390_stopped_by_watchpoint): Clear the watchpoint status
after reading it.
(s390_fix_watch_points): Take a PTID argument.
(s390_insert_watchpoint, s390_remove_watchpoint): Use ALL_LWPS.
(_initialize_s390_nat): Call linux_nat_set_new_thread.
2007-09-30 Daniel Jacobowitz <dan@codesourcery.com>
Jeff Johnston <jjohnstn@redhat.com>
* breakpoint.c (watchpoints_triggered): New.
(bpstat_stop_status): Remove STOPPED_BY_WATCHPOINT argument.
Check watchpoint_triggered instead. Combine handling for software
and hardware watchpoints. Do not use target_stopped_data_address
here. Always check a watchpoint if its scope breakpoint triggers.
Do not stop for thread or overlay events. Improve check for
triggered watchpoints without a value change.
(watch_command_1): Insert the scope breakpoint first. Link the
scope breakpoint to the watchpoint.
* breakpoint.h (enum watchpoint_triggered): New.
(struct breakpoint): Add watchpoint_triggered.
(bpstat_stop_status): Update prototype.
(watchpoints_triggered): Declare.
* infrun.c (enum infwait_status): Add infwait_step_watch_state.
(stepped_after_stopped_by_watchpoint): Delete.
(handle_inferior_event): Make stepped_after_stopped_by_watchpoint
local. Handle infwait_step_watch_state. Update calls to
bpstat_stop_status. Use watchpoints_triggered to check
watchpoints.
* remote.c (stepped_after_stopped_by_watchpoint): Remove extern.
(remote_stopped_data_address): Do not check it.
2007-09-29 Daniel Jacobowitz <dan@codesourcery.com>
* configure.ac: Add $LIBINTL when testing libbfd.
* configure: Regenerated.
2007-09-28 Vladimir Prus <vladimir@codesourcery.com>
* NEW: Mention pending breakpoint changes and
support for breakpoints at multiple locations.
2007-09-27 Daniel Jacobowitz <dan@codesourcery.com>
* arm-linux-tdep.c (arm_linux_software_single_step): New.
(arm_linux_init_abi): Use it.
* arm-tdep.c (arm_get_next_pc): Make global. Handle all-ones
condition correctly.
* arm-tdep.h (arm_get_next_pc): Declare.
* Makefile.in (arm-linux-tdep.o): Update.
2007-09-26 Vladimir Prus <vladimir@codesourcery.com>
* varobj.c (install_new_value): Don't
call value_get_print_value when a value is
lazy. Update the print_value member in a
single place.
2007-09-26 Vladimir Prus <vladimir@codesourcery.com>
* breakpoint.c (create_breakpoint): Set
condition on each location, not on the first
location of breakpoint.
2007-09-26 Jim Blandy <jimb@codesourcery.com>
* remote.c (getpkt_sane): Fix error message. No animals were
harmed in the making of this debugger.
2007-09-26 Pierre Muller <muller@ics.u-strasbg.fr>
* p-typeprint.c: Fix 11 ARI reported problems.
(pascal_print_type): Fix 4 operator at end of line.
(pascal_type_print_method_args) : Replace 2 DEPRECATED_STREQN macros
using strncmp function.
(pascal_type_print_base): Fix 2 operator at end of line.
(pascal_type_print_base) : Replace 3 DEPRECATED_STREQN macros
using strncmp function.
2007-09-26 Pierre Muller <muller@ics.u-strasbg.fr>
* Fix PR pascal/2231
dwarf2read.c (read_subroutine_type):
All pascal functions are prototyped.
2007-09-26 Pierre Muller <muller@ics.u-strasbg.fr>
* Fix PR pascal/2283
p-valprint.c (pascal_val_print): correct current language check.
Also print array of char as strings.
2007-09-26 David Ung <davidu@mips.com>
Maciej W. Rozycki <macro@mips.com>
* mips-tdep.c (mips_n32n64_return_value): Fix a comment.
2007-09-25 Pierre Muller <muller@ics.u-strasbg.fr>
* p-exp.y: Fix 12 ARI reported problems.
(name_not_typename): Fix 2 operator at end of line issues.
(yylex): Fix 3 operator at end of line issues.
Replace 7 DEPRECATED_STREQ macros using strcmp function.
2007-09-25 David Ung <davidu@mips.com>
Maciej W. Rozycki <macro@mips.com>
* mips-tdep.c (mips_n32n64_return_value): Per N32/N64 ABI
rules return composite types in registers as appropriate.
2007-09-24 Jim Blandy <jimb@codesourcery.com>
* symfile.h (struct symfile_segment_data): Doc fixes.
* symfile.c (symfile_map_offsets_to_segments): Doc fixes.
Assert that we were passed some loaded segment addresses,
and that sections' segment numbers are valid.
Simplify offset calculation.
* remote.c (get_offsets): Clarify selection of relocate-by-segment
strategy, and set num_segments correctly. Delete redundant
assignments to do_sections.
2007-09-24 Daniel Jacobowitz <dan@codesourcery.com>
* frame.c (get_prev_frame_1): Also check for PC in the same register.
2007-09-24 Vladimir Prus <vladimir@codesourcery.com>
* breakpoint.c (remove_sal): New.
(expand_line_sal_maybe): New.
(create_breakpoints): Call expand_line_sal_maybe.
(clear_command): Add comment.
(breakpoint_re_set_one): Call expand_line_sal_maybe.
* linespec.c (decode_indirect): Set explicit_pc to 1.
(decode_all_digits): Set explicit_line to 1.
(append_expanded_sal): New.
(expand_line_sal): New.
* linespec.h (expand_line_sal): Declare.
* symtab.c (init_sal): Initialize explicit_pc
and explicit_line.
* symtab.h (struct symtab_and_line): New fields
explicit_pc and explicit_line.
2007-09-23 Daniel Jacobowitz <dan@codesourcery.com>
* infcall.c (call_function_by_hand): Handle language-specific
pass and return by reference.
* cp-abi.c (cp_pass_by_reference): New.
* cp-abi.h (cp_pass_by_reference): Declare.
(struct cp_abi_ops): Add pass_by_reference.
* gnu-v3-abi.c (gnuv3_pass_by_reference): New.
(init_gnuv3_ops): Set pass_by_reference.
* language.c (language_pass_by_reference): New.
(default_pass_by_reference): New.
(unknown_language_defn, auto_language_defn, local_language_defn): Add
default_pass_by_reference.
* langauge.h (struct language_defn): Add la_pass_by_reference.
(language_pass_by_reference, default_pass_by_reference): Declare.
* ada-lang.c (ada_language_defn): Add default_pass_by_reference.
* c-lang.c (c_language_defn, asm_language_defn)
(minimal_language_defn): Likewise.
(cplus_language_defn): Add cp_pass_by_reference.
* f-lang.c (f_language_defn): Add default_pass_by_reference.
* jv-lang.c (java_language_defn): Likewise.
* m2-lang.c (m2_language_defn): Likewise.
* objc-lang.c (objc_language_defn): Likewise.
* p-lang.c (pascal_language_defn): Likewise.
* scm-lang.c (scm_language_defn): Likewise
2007-09-23 Vladimir Prus <vladimir@codesourcery.com>
Allow a code breakpoint to have several locations
associated with it.
* breakpoint.h (enum enable_state): Remove the
bp_shlib_disabled enumerator.
(struct bp_location): New members shlib_disabled,
global_next, enabled and function_name.
Rename pending to condition_not_parsed.
* breakpoint.c (ALL_BP_LOCATIONS): Iterate over global_next.
(ALL_BP_LOCATIONS_SAFE): Likewise.
(breakpoint_enabled): Don't check for pending.
(condition_command): Free and update all locations of
a breakpoint.
(insert_bp_location): Adjust.
(software_breakpoint_inserted_here_p): Don't care
if breakpoint is enabled, as soon as it's inserted.
(print_it_typical): Print bpstat's location, not
bpstat's breakpoint's location.
(bpstat_stop_status): Iterate over all locations, not
all breakpoints.
(print_breakpoint_location): New.
(print_one_breakpoint): Renamed to
(print_one_breakpoint_location): ...this. Take
parameters to describe which location is being
printed. Modify code to properly print header
for several locations and individual locations.
(print_one_breakpoint): Print all locations.
(breakpoint_has_pc): New.
(describe_other_breakpoints): Use the above.
(check_duplicates): Renamed to...
(check_duplicates_for): .. this.
(check_duplicates): Use check_duplicates_for.
(allocate_bp_location): Adjust.
(set_raw_breakpoint_without_location): New,
extracted from set_raw_breakpoint.
(set_breakpoint_location_function): New.
(set_raw_breakpoint): Use
set_raw_breakpoint_without_location.
(make_breakpoint_permanent): Mark all locations
as inserted.
(disable_breakpoints_in_shlibs): Iterate over
locations.
(disable_breakpoints_in_unloaded_shlib): Likewise.
(re_enable_breakpoints_in_shlibs): Likewise.
(mention): Say "pending" when breakpoint has
zero locations. If breakpoint has more than one
location, say so.
(add_location_to_breakpoint): New.
(create_breakpoint): Accept symtabs_and_lines, not
symtab_and_line. Pass extra sals to
add_location_to_breakpoint.
(create_breakpoints): Pass symtabs_and_lines to
create_breakpoints.
(break_command_1): Make pending breakpoints
have zero locations.
(do_captured_breakpoint): Remove wrong allocation.
(clear_command): Iterate over all locations.
(unlink_locations_from_global_list): Renamed
from unlink_location_from_global_list. Remove
all locations.
(delete_breakpoint): Remove all locations.
Iterate over all locations when deciding which
other location to re-enable.
(all_locations_are_pending): New.
(update_breakpoint_locations): Renamed from
update_breakpoint_location. Try to match old
and new locations using names of containing
functions.
(breakpoint_re_set_one): Adjust.
(find_location_by_number): New.
(disable_command): Allow disabling individual location.
(enable_command): Allow enabling individual location.
* breakpoint.c: Adjust all uses of breakpoint's
enable state to for bp_shlib_disabled change.
2007-09-22 Vladimir Prus <vladimir@codesourcery.com>
* breakpoint.c (do_restore_lang_radix_cleanup): Remove.
(resolve_pending_breakpoint): Remove.
(re_enable_breakpoints_in_shlibs): Remove.
(unlink_locations_from_global_list): New.
(update_breakpoint_locations): New.
(breakpoint_re_set_one): Don't bail out on pending breakpoints.
Use parse_condition and update_breakpoint_location to
reset breakpoint. Ignore 'symbol not found' error from
decode_line_1.
(breakpoint_re_set): Don't emit newline before the
reason why breakpoint is not reset.
(do_enable_breakpoint): Don't specially process pending
breakpoints.
(free_bp_location): New.
(break_command_1): For pending breakpoints, initialize
all fields of a sal with zeroes.
* breakpoint.h (re_enable_breakpoints_in_shlibs): Remove.
* infcmd.c (post_create_inferior): Don't call
re_enable_breakpoints_in_shlibs.
* infrun.c (handle_inferior_event): Likewise.
* solib-irix.c (irix_solib_create_inferior_hook): Likewise.
* solib-osf.c (osf_solib_create_inferior_hook): Likewise.
* win32-nat.c (get_win32_debug_event): Likewise.
2007-09-22 Vladimir Prus <vladimir@codesourcery.com>
* breakpoint.c (create_breakpoint): Split from
create_breakpoints, implementing most of its logic.
Take just a single sal, single address string and
single condition. Do not take parsed condition at
all.
(create_breakpoints): Just call create_breakpoint
for each sal.
(find_condition_and_thread): New.
(break_command_1): Use find_condition_and_thread.
Do not keep parsed conditions.
(do_captured_breakpoint): Don't convert
condition string to struct expression.
2007-09-22 Vladimir Prus <vladimir@codesourcery.com>
* breakpoint.h (struct breakpoint): Move the cond
field to...
(struct bp_location): Here.
* breakpoint.c (condition_command, bpstat_stop_status)
(print_one_breakpoint, allocate_bp_location)
(solib_load_unload_1, create_fork_vfork_event_catchpoint)
(create_exec_event_catchpoint, create_breakpoints)
(break_command_1, watch_command_1, handle_gnu_v3_exceptions)
(create_ada_exception_breakpoint, set_breakpoint_sal)
(delete_breakpoint, breakpoint_re_set_one): Adjust.
* tui/tui-winsource.c (tui_update_breakpoint_info): Adjust.
2007-09-22 Vladimir Prus <vladimir@codesourcery.com>
Associate bp_stat with bp_location, not breakpoint.
* breakpoint.h (breakpoint_at): Change type
to bp_location*.
* breakpoint.c (bpstat_alloc): Take bp_location,
not breakpoint.
(bpstat_find_breakpoint): Look at bpstat's location's
owner, not at bpstat->breakpoint_at.
(bpstat_find_step_resume_breakpoint): Likewise.
(bpstat_num): Likewise.
(print_it_typical): Likewise.
(print_bp_stop_message): Likewise.
(watchpoint_check): Likewise.
(bpstat_what): Likewise.
(bpstat_get_triggered_catchpoints): Likewise.
(breakpoint_auto_delete): Likewise.
(delete_breakpoint): Likewise.
(bpstat_stop_status): Pass location, not breakpoint,
to bpstat_alloc. Look at bpstat's location's
owner, not at bpstat->breakpoint_at.
2007-09-21 Jim Blandy <jimb@codesourcery.com>
* macrotab.h (new_macro_table): Document that removing information
from an obstack/bcache-managed macro table leaks memory.
* macrotab.c (macro_free, macro_bcache_free): Instead of asserting
that data is never freed in obstack/bcache-managed macro tables,
just leak the storage.
(macro_undef): If we're undefining a macro at exactly the same
source location that we defined it, simply remove the definition
altogether.
2007-09-21 Joel Brobecker <brobecker@adacore.com>
* symfile.h (struct sym_fns): Add new field sym_read_linetable.
* coffread.c, dbxread.c, elfread.c, mipsread.c somread.c:
Adjust the struct sym_fns object accordingly by setting
the new field to NULL.
* xcoffread.c (aix_process_linenos): Make static.