| 2009-07-25 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * configure.in: Handle bfd_l1om_arch. |
| * disassemble.c (disassembler): Likewise. |
| |
| * configure: Regenerated. |
| |
| * i386-dis.c (print_insn): Handle bfd_mach_l1om and |
| bfd_mach_l1om_intel_syntax. Use 8 bytes per line for Intel L1OM. |
| |
| * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~CpuL1OM. |
| Add CPU_L1OM_FLAGS. |
| (cpu_flags): Add CpuL1OM. |
| (set_bitfield): Take an argument to set the value field. |
| (process_i386_cpu_flag): Support ~CpuXXX and ~(CpuXXX|CpuYYY). |
| (process_i386_opcode_modifier): Updated. |
| (process_i386_operand_type): Likewise. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| * i386-opc.h (CpuL1OM): New. |
| (CpuXsave): Updated. |
| (i386_cpu_flags): Add cpul1om. |
| |
| 2009-07-24 Jan Beulich <jbeulich@novell.com> |
| |
| * i386-dis.c (fgrps): Correct annotation for feni/fdisi. Add |
| frstpm. |
| * i386-gen.c (cpu_flag_init): Add FP enabling flags where needed. |
| (cpu_flags): Add Cpu8087, Cpu287, Cpu387, Cpu687, and CpuFISTTP. |
| (set_bitfield): Expand CpuFP to Cpu8087|Cpu287|Cpu387. |
| * i386-opc.h (Cpu8087, Cpu287, Cpu387, Cpu687, CpuFISTTP): |
| Define. |
| (union i386_cpu_flags): Add cpu8087, cpu287, cpu387, cpu687, |
| and cpufisttp. |
| * i386-opc.tbl: Qualify floating point instructions by their |
| respective CpuXXX flag. Fix fucom{,p,pp}, fprem1, fsin, fcos, |
| and fsincos to be avilable only on 387. Fix fstsw ax to be |
| available only on 287+. Add f{,n}eni, f{,n}disi, f{,n}setpm, |
| and frstpm. |
| * i386-init.h, i386-tbl.h: Regenerate. |
| |
| 2009-07-20 Nick Clifton <nickc@redhat.com> |
| |
| PR 10288 |
| * arm-dis.c (arm_opcodes): Catch non-zero bits 8-11 in register |
| offset or indexed based addressing mode 3. |
| |
| 2009-07-14 Nick Clifton <nickc@redhat.com> |
| |
| PR 10288 |
| * arm-dis.c (arm_opcodes): Catch illegal Addressing Mode 1 |
| patterns. |
| (arm_decode_shift): Catch illegal register based shifts. |
| (print_insn_arm): Properly handle negative register r0 |
| post-indexed addressing. |
| |
| 2009-07-10 Doug Kwan <dougkwan@google.com> |
| |
| * arm-disc.c (print_insn_coprocessor, print_insn_arm): Print only |
| lower 32 bits of long types to make hexadecimal output consistent |
| on both 32-bit and 64-bit hosts. |
| |
| 2009-07-10 Alan Modra <amodra@bigpond.net.au> |
| |
| * fr30-desc.c, * fr30-desc.h, * fr30-opc.c, * fr30-opc.h, |
| * frv-desc.c, * frv-desc.h, * frv-opc.c, * frv-opc.h, |
| * ip2k-desc.c, * ip2k-desc.h, * ip2k-opc.c, * ip2k-opc.h, |
| * iq2000-desc.c, * iq2000-desc.h, * iq2000-opc.c, * iq2000-opc.h, |
| * lm32-desc.c, * lm32-desc.h, * lm32-opc.c, * lm32-opc.h, |
| * lm32-opinst.c, * m32c-desc.c, * m32c-desc.h, * m32c-opc.c, |
| * m32c-opc.h, * m32r-desc.c, * m32r-desc.h, * m32r-opc.c, |
| * m32r-opc.h, * m32r-opinst.c, * mt-desc.c, * mt-desc.h, |
| * mt-opc.c, * mt-opc.h, * openrisc-desc.c, * openrisc-desc.h, |
| * openrisc-opc.c, * openrisc-opc.h, * xc16x-desc.c, * xc16x-desc.h, |
| * xc16x-opc.c, * xc16x-opc.h, * xstormy16-desc.c, * xstormy16-desc.h, |
| * xstormy16-opc.c, * xstormy16-opc.h: Regenerate. |
| |
| 2009-07-07 Chung-Lin Tang <cltang@pllab.cs.nthu.edu.tw> |
| |
| * arm-dis.c (coprocessor_opcodes): Fix mask for waddbhus. |
| |
| 2009-07-07 Nick Clifton <nickc@redhat.com> |
| |
| PR 10288 |
| * arm-dis.c (arm_opcodes): Be more strict about decoding scaled |
| addressing modes. |
| |
| 2009-07-06 DJ Delorie <dj@redhat.com> |
| |
| * mep-desc.c: Regenerate. |
| * mep-desc.h: Regenerate. |
| * mep-opc.c: Regenerate. |
| * mep-opc.h: Regenerate. |
| |
| 2009-07-06 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> |
| |
| * i386-opc.h (CpuFMA4): Add CpuFMA4. |
| (i386_cpu_flags): New. |
| * i386-gen.c: Add CPU_FMA4_FLAGS. |
| * i386-opc.tbl: Add FMA4 instructions. |
| * i386-tbl.h: Regenerate. |
| * i386-init.h: Regenerate. |
| * i386-dis.c (OP_VEX_FMA): New. Handle FMA4. |
| (OP_XMM_VexW): Ditto. |
| (OP_EX_VexW): Ditto. |
| (VEXI4_Fixup): Ditto. |
| (VexI4, VexFMA, Vex128FMA, EXVexW, EXdVexW, XMVexW): New Macros. |
| (PREFIX_VEX_3A5C, PREFIX_VEX_3A5D, PREFIX_VEX_3A5E): New. |
| (PREFIX_VEX_3A5F, PREFIX_VEX_3A60): New. |
| (PREFIX_VEX_3A68, PREFIX_VEX_3A69, PREFIX_VEX_3A6A): New. |
| (PREFIX_VEX_3A6B, PREFIX_VEX_3A6C, PREFIX_VEX_3A6D): New. |
| (PREFIX_VEX_3A6E, PREFIX_VEX_3A6F, PREFIX_VEX_3A7A): New. |
| (PREFIX_VEX_3A7B, PREFIX_VEX_3A7C, PREFIX_VEX_3A7D): New. |
| (PREFIX_VEX_3A7E, PREFIX_VEX_3A7F): New. |
| (VEX_LEN_3A6A_P_2,VEX_LEN_3A6B_P_2, VEX_LEN_3A6E_P_2): New. |
| (VEX_LEN_3A6F_P_2,VEX_LEN_3A7A_P_2, VEX_LEN_3A7B_P_2): New. |
| (VEX_LEN_3A7E_P_2,VEX_LEN_3A7F_P_2): New. |
| (get_vex_imm8): New. handle FMA4. |
| (OP_EX_VexReg): Ditto. |
| |
| 2009-06-30 Nick Clifton <nickc@redhat.com> |
| |
| PR 10288 |
| * arm-dis.c (coprocessor): Print the LDC and STC versions of the |
| LFM and SFM instructions as comments,. |
| Improve consistency of formatting for instructions displayed as |
| comments and decimal values displayed with their hexadecimal |
| equivalents. |
| Formatting tidy ups. |
| |
| 2009-06-29 Nick Clifton <nickc@redhat.com> |
| |
| PR 10288 |
| * arm-dis.c (enum opcode_sentinels): New: Used to mark the |
| boundary between variaant and generic coprocessor instuctions. |
| (coprocessor): Use it. |
| Fix architecture version of MCRR and MRRC instructions. |
| (arm_opcdes): Fix patterns for STRB and STRH instructions. |
| (print_insn_coprocessor): Check architecture and extension masks. |
| Print a hexadecimal version of any decimal constant that is |
| outside of the range of -16 to +32. |
| (print_arm_address): Add a return value of the offset used in the |
| adress, if it is worth printing a hexadecimal version of it. |
| (print_insn_neon): Print a hexadecimal version of any decimal |
| constant that is outside of the range of -16 to +32. |
| (print_insn_arm): Likewise. |
| (print_insn_thumb16): Likewise. |
| (print_insn_thumb32): Likewise. |
| |
| PR 10297 |
| * arm-dis.c (UNDEFINED_INSTRUCTION): New macro for a description |
| of an undefined instruction. |
| (arm_opcodes): Use it. |
| (thumb_opcod): Use it. |
| (thumb32_opc): Use it. |
| |
| 2009-06-23 DJ Delorie <dj@redhat.com> |
| |
| * mep-desc.c: Regenerate. |
| * mep-desc.h: Regenerate. |
| * mep-dis.c: Regenerate. |
| * mep-ibld.c: Regenerate. |
| * mep-opc.c: Regenerate. |
| |
| * mep-asm.c: Regenerate. |
| * mep-opc.c: Regenerate. |
| * mep-opc.h: Regenerate. |
| |
| 2009-06-22 Nick Clifton <nickc@redhat.com> |
| |
| * po/fi.po: Updated Finish translation. |
| |
| 2009-06-22 Alan Modra <amodra@bigpond.net.au> |
| |
| * m32c-asm.c: Regenerate. |
| |
| 2009-06-22 Alan Modra <amodra@bigpond.net.au> |
| |
| * score-dis.c (print_insn_score48, print_insn_score32): Move default |
| case label to proper lexical block. |
| * score7-dis.c (print_insn_score32): Likewise. |
| |
| 2009-06-19 Martin Schwidefsky <sschwidefsky@de.ibm.com> |
| |
| * s390-opc.c (INSTR_RR_0R_OPT, INSTR_RX_0RRD_OPT, MASK_RR_0R_OPT, |
| MASK_RX_0RRD_OPT): New instruction formats with optional arguments. |
| * s390-opc.txt (nopr, nop): Use new instruction format. |
| |
| 2009-06-18 Nick Clifton <nickc@redhat.com> |
| |
| PR 10288 |
| * arm-dis.c (print_insn_coprocessor): Check that a user specified |
| ARM architecture supports the matched instruction. |
| (print_insn_arm): Likewise. |
| (select_arm_features): New function. Fills in the fields of an |
| arm_feature_set structure based on a given arm machine number. |
| (print_insn): Initialise an arm_feature_set structure. |
| |
| 2009-06-16 Maciej W. Rozycki <macro@linux-mips.org> |
| |
| * vax-dis.c (is_function_entry): Return success for synthetic |
| symbols too. |
| (is_plt_tail): New function. |
| (print_insn_vax): Decode PLT entry offset longword. |
| |
| 2009-06-15 Nick Clifton <nickc@redhat.com> |
| |
| PR 10186 |
| * arm-dis.c (thumb32_opcodes): Fix binary value of SEV.W |
| instruction. |
| |
| PR 10173 |
| * cr16-dis.c (print_arg): Avoid printing the 0x prefix twice. |
| |
| 2009-06-15 Nick Clifton <nickc@redhat.com> |
| |
| PR 10263 |
| * arm-dis.c (print_insn): Ignore is_data if the user has requested |
| the disassembly of data as well as instructions. |
| |
| 2009-06-11 Doug Evans <dje@sebabeach.org> |
| |
| * cgen.sh: Handle multiple simultaneous runs for parallel makes. |
| |
| 2009-06-11 Anthony Green <green@moxielogic.com> |
| |
| * moxie-opc.c (moxie_form1_opc_info): Remove branch instructions. |
| (moxie_form3_opc_info): Add branch instructions. |
| * moxie-dis.c (print_insn_moxie): Disassemble MOXIE_F3_PCREL |
| encoded instructions. |
| |
| 2009-06-06 Anthony Green <green@moxielogic.com> |
| |
| * moxie-opc.c: Recode some MOXIE_F1_4 opcodes as MOXIE_F1_M. |
| * moxie-dis.c (print_insn_moxie): Handle MOXIE_F1_M case. |
| |
| 2009-06-04 Alan Modra <amodra@bigpond.net.au> |
| |
| * dep-in.sed: Don't use \n in replacement part of s command. |
| * Makefile.am (DEP1): LC_ALL for uniq. |
| * Makefile.in: Regenerate. |
| |
| 2009-06-02 Nick Clifton <nickc@redhat.com> |
| |
| * po/nl.po: Updated Dutch translation. |
| |
| 2009-06-02 Tristan Gingold <gingold@adacore.com> |
| |
| * ia64-gen.c (parse_resource_users, print_dependency_table, |
| add_dis_table_ent, finish_distable, insert_bit_table_ent, |
| add_dis_entry, compact_distree, gen_dis_table, completer_entries_eq, |
| get_prefix_len, compute_completer_bits, insert_opcode_dependencies, |
| insert_completer_entry, print_completer_entry, print_completer_table, |
| opcodes_eq, add_opcode_entry, shrink): Use ISO C syntax for functions. |
| |
| 2009-05-28 DJ Delorie <dj@redhat.com> |
| |
| * mep-asm.c: Regenerate. |
| * mep-desc.c: Regenerate. |
| |
| 2009-05-26 DJ Delorie <dj@redhat.com> |
| |
| * mep-asm.c: Regenerate. |
| * mep-desc.c: Regenerate. |
| * mep-desc.h: Regenerate. |
| * mep-dis.c: Regenerate. |
| * mep-ibld.c: Regenerate. |
| * mep-opc.c: Regenerate. |
| * mep-opc.h: Regenerate. |
| |
| 2009-05-26 Nick Clifton <nickc@redhat.com> |
| |
| * po/id.po: Updated Indonesian translation. |
| * po/opcodes.pot: Updated template file. |
| |
| 2009-05-26 Alan Modra <amodra@bigpond.net.au> |
| |
| * dep-in.sed: Don't modify .o to .lo here. Output one filename |
| per line with all lines having continuation backslash. Prefix |
| first line with "A", following lines with "B". |
| * Makefile.am (DEP): Don't use dep.sed here. |
| (DEP1): Run $MKDEP on single files, modify .o to .lo here. Use |
| dep.sed here on dependencies, sort and uniq. |
| * Makefile.in: Regenerate. |
| |
| 2009-05-25 Tristan Gingold <gingold@adacore.com> |
| |
| * makefile.vms (OPT): New variable. |
| (CFLAGS): Update compilation flags. |
| |
| 2009-05-22 DJ Delorie <dj@redhat.com> |
| |
| * mep-asm.c: Regenerate. |
| * mep-desc.c: Regenerate. |
| * mep-desc.h: Regenerate. |
| * mep-dis.c: Regenerate. |
| * mep-ibld.c: Regenerate. |
| * mep-opc.c: Regenerate. |
| * mep-opc.h: Regenerate. |
| |
| 2009-05-22 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> |
| |
| * i386-opc.h (Cpusse5): Delete. |
| (i386_cpu_flags): Delete. |
| * i386-gen.c: Remove CpuSSE5, Drex, Drexv and Drexc. |
| * i386-opc.tbl: Remove SSE5 instructions. |
| * i386-tbl.h: Regenerate. |
| * i386-init.h: Regenerate. |
| * i386-dis.c (OP_E_memeory, OP_E_extended): Remove drex handling. |
| (print_drex_arg): Delete. |
| (OP_DREX4): Delete. |
| (OP_DREX3): Delete. |
| (OP_DREX_ICMP): Delete. |
| (OP_DREX_FCMP): Delete. |
| (DREX_*): Delete. |
| (THREE_BYTE_0F24, THREE_BYTE_0F25, THREE_BYTE_0f7B): Delete. |
| |
| 2009-05-22 Alan Modra <amodra@bigpond.net.au> |
| |
| * Makefile.am: Run "make dep-am". |
| * Makefile.in: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2009-05-19 DJ Delorie <dj@redhat.com> |
| |
| * mep-asm.c: Regenerate. |
| * mep-opc.c: Regenerate. |
| |
| 2009-04-30 DJ Delorie <dj@redhat.com> |
| |
| * mep-asm.c: Regenerate. |
| * mep-desc.c: Regenerate. |
| * mep-desc.h: Regenerate. |
| * mep-dis.c: Regenerate. |
| * mep-ibld.c: Regenerate. |
| * mep-opc.c: Regenerate. |
| * mep-opc.h: Regenerate. |
| |
| 2009-04-17 DJ Delorie <dj@redhat.com |
| |
| * mep-desc.c: Regenerate. |
| * mep-ibld.c: Regenerate. |
| * mep-opc.c: Regenerate. |
| * mep-opc.h: Regenerate. |
| |
| 2009-04-15 Anthony Green <green@moxielogic.com> |
| |
| * moxie-opc.c, moxie-dis.c: Created. |
| * Makefile.am: Build the moxie source files. |
| * configure.in: Add moxie support. |
| * Makefile.in, configure: Rebuilt. |
| * disassemble.c (disassembler): Add moxie support. |
| (ARCH_moxie): Define. |
| |
| 2009-04-15 Jan Beulich <jbeulich@novell.com> |
| |
| * i386-opc.tbl (protb, protw, protd, protq): Set opcode |
| extension to None. |
| (pshab, pshaw, pshad, pshaq): Likewise. |
| * i386-tbl.h: Re-generate. |
| |
| 2009-04-08 DJ Delorie <dj@redhat.com |
| |
| * mep-asm.c: Regenerate. |
| * mep-desc.c: Regenerate. |
| * mep-desc.h: Regenerate. |
| * mep-dis.c: Regenerate. |
| * mep-ibld.c: Regenerate. |
| * mep-opc.c: Regenerate. |
| * mep-opc.h: Regenerate. |
| |
| 2009-04-07 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * ppc-opc.c (powerpc_opcodes) <"tlbilxlpid", "tlbilxpid", "tlbilxva", |
| "tlbilx">: Use secondary opcode "18" as per the ISA 2.06 documentation. |
| Reorder entries so the extended mnemonics are listed before tlbilx. |
| |
| 2009-04-02 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * ppc-dis.c (powerpc_init_dialect): Do not choose a default dialect |
| due to -many/-Many. |
| (print_insn_powerpc): Make sure we only deprecate instructions using |
| the original dialect and not a modified dialect due to -Many handling. |
| Move the handling of the condition register and default operands to |
| the end of the if/else if/else chain. |
| * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that |
| instructions from newer processors are listed before older ones. |
| <"icblce", "sync", "eieio", "tlbld">: Deprecate for processors |
| that have instructions with conflicting opcodes. |
| |
| 2009-04-01 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * ppc-opc.c (powerpc_opcodes) <"dcbzl">: Merge the POWER4 and |
| E500MC entries. |
| |
| 2009-04-01 Christophe Lyon <christophe.lyon@st.com> |
| |
| * arm-dis.c (print_insn): Print BE8 opcodes in little endianness. |
| |
| 2009-03-30 Joseph Myers <joseph@codesourcery.com> |
| |
| * arm-dis.c (print_insn): Also check section matches in backwards |
| search for mapping symbol. |
| |
| 2009-03-26 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (get_valid_dis386): Abort on unhandled table. |
| |
| 2009-03-18 Alan Modra <amodra@bigpond.net.au> |
| |
| * cgen-opc.c: Include alloca-conf.h rather than alloca.h. |
| * Makefile.am: Run "make dep-am". |
| * Makefile.in: Regenerate. |
| * openrisc-opc.c: Regenerate. |
| |
| 2009-03-10 Nick Clifton <nickc@redhat.com> |
| |
| * po/id.po: Updated Indonesian translation. |
| |
| 2009-03-10 Alan Modra <amodra@bigpond.net.au> |
| |
| * ppc-dis.c: Include "opintl.h". |
| (struct ppc_mopt, ppc_opts): New. |
| (ppc_parse_cpu): New function. |
| (powerpc_init_dialect): Use it. |
| (print_ppc_disassembler_options): Dump options from ppc_opts. |
| Internationalize message. |
| |
| 2009-03-06 Nick Clifton <nickc@redhat.com> |
| |
| * po/es.po: Updated Spanish translation. |
| |
| 2009-03-04 Alan Modra <amodra@bigpond.net.au> |
| |
| PR 6768 |
| * configure.in: Test for ld --as-needed support. Link shared |
| libopcodes against libm. |
| * configure: Regenerate. |
| |
| 2009-03-03 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * ppc-opc.c (powerpc_opcodes): Reorder the opcode table so that |
| instructions from newer processors are listed before older ones. |
| |
| 2009-03-03 Alan Modra <amodra@bigpond.net.au> |
| |
| * Makefile.am: Run "make dep-am". |
| (HFILES): Move lm32-desc.h and lm32-opc.h from.. |
| (CFILES): ..here. |
| * Makefile.in: Regenerate. |
| |
| 2009-03-02 Qinwei <qinwei@sunnorth.com.cn> |
| |
| * score7-dis.c: New file. |
| * Makefile.am: Add dependencies for score7-dis.c. |
| * Makefile.in: Regenerate. |
| * configure.in: Add score7-dis to score files. |
| * configure: Regenerate. |
| * score-dis.c: Add support for score7 architecture. |
| * score-opc.h: Likewise. |
| |
| 2009-03-01 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * configure: Regenerate. |
| |
| 2009-02-27 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (OP_EX): Call OP_E_memory instead of OP_E. |
| |
| 2009-02-26 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * ppc-dis.c (powerpc_init_dialect): Extend -Mpower7 to disassemble |
| the power7 and the isel instructions. |
| * ppc-opc.c (insert_xc6, extract_xc6): New static functions. |
| (insert_dm, extract_dm): Likewise. |
| (XB6): Update comment to include XX2 form. |
| (WC, XC6, SHW, DMEX, UIM, XX2, XX3RC, XX4, XX2_MASK, XX2UIM_MASK, |
| XX2BF_MASK, XX3BF_MASK, XX3SHW_MASK, XX4_MASK, XWC_MASK, POWER7): New. |
| (RemoveXX3DM): Delete. |
| (powerpc_opcodes): <"lfdp", "lfdpx", "mcrxr", "mftb", "mffgpr", |
| "mftgpr">: Deprecate for POWER7. |
| <"fres", "fres.", "frsqrtes", "frsqrtes.", "fre", "fre.", "frsqrte", |
| "frsqrte.">: Deprecate the three operand form and enable the two |
| operand form for POWER7 and later. |
| <"wait">: Extend to accept optional parameter. Enable for POWER7. |
| <"waitsrv", "waitimpl">: Add extended opcodes. |
| <"ldbrx", "stdbrx">: Enable for POWER7. |
| <"cdtbcd", "cbcdtd", "addg6s">: Add POWER6 opcodes. |
| <"bpermd", "dcbtstt", "dcbtt", "dcffix.", "dcffix", "divde.", "divde", |
| "divdeo.", "divdeo", "divdeu.", "divdeu", "divdeuo.", "divdeuo", |
| "divwe.", "divwe", "divweo.", "divweo", "divweu.", "divweu", "divweuo.", |
| "divweuo", "fcfids.", "fcfids", "fcfidu.", "fcfidu", "fcfidus.", |
| "fcfidus", "fctidu.", "fctidu", "fctiduz.", "fctiduz", "fctiwu.", |
| "fctiwu", "fctiwuz.", "fctiwuz", "ftdiv", "ftsqrt", "lbarx", "lfiwzx", |
| "lharx", "popcntd", "popcntw", "stbcx.", "sthcx.">: Add POWER7 opcodes. |
| <"lxsdux", "lxsdx", "lxvdsx", "lxvw4ux", "lxvw4x", "stxsdux", "stxsdx", |
| "stxvw4ux", "stxvw4x", "xsabsdp", "xsadddp", "xscmpodp", "xscmpudp", |
| "xscpsgndp", "xscvdpsp", "xscvdpsxds", "xscvdpsxws", "xscvdpuxds", |
| "xscvdpuxws", "xscvspdp", "xscvsxddp", "xscvuxddp", "xsdivdp", |
| "xsmaddadp", "xsmaddmdp", "xsmaxdp", "xsmindp", "xsmsubadp", |
| "xsmsubmdp", "xsmuldp", "xsnabsdp", "xsnegdp", "xsnmaddadp", |
| "xsnmaddmdp", "xsnmsubadp", "xsnmsubmdp", "xsrdpi", "xsrdpic", |
| "xsrdpim", "xsrdpip", "xsrdpiz", "xsredp", "xsrsqrtedp", "xssqrtdp", |
| "xssubdp", "xstdivdp", "xstsqrtdp", "xvabsdp", "xvabssp", "xvadddp", |
| "xvaddsp", "xvcmpeqdp.", "xvcmpeqdp", "xvcmpeqsp.", "xvcmpeqsp", |
| "xvcmpgedp.", "xvcmpgedp", "xvcmpgesp.", "xvcmpgesp", "xvcmpgtdp.", |
| "xvcmpgtdp", "xvcmpgtsp.", "xvcmpgtsp", "xvcpsgnsp", "xvcvdpsp", |
| "xvcvdpsxds", "xvcvdpsxws", "xvcvdpuxds", "xvcvdpuxws", "xvcvspdp", |
| "xvcvspsxds", "xvcvspsxws", "xvcvspuxds", "xvcvspuxws", "xvcvsxddp", |
| "xvcvsxdsp", "xvcvsxwdp", "xvcvsxwsp", "xvcvuxddp", "xvcvuxdsp", |
| "xvcvuxwdp", "xvcvuxwsp", "xvdivdp", "xvdivsp", "xvmaddadp", |
| "xvmaddasp", "xvmaddmdp", "xvmaddmsp", "xvmaxdp", "xvmaxsp", |
| "xvmindp", "xvminsp", "xvmovsp", "xvmsubadp", "xvmsubasp", "xvmsubmdp", |
| "xvmsubmsp", "xvmuldp", "xvmulsp", "xvnabsdp", "xvnabssp", "xvnegdp", |
| "xvnegsp", "xvnmaddadp", "xvnmaddasp", "xvnmaddmdp", "xvnmaddmsp", |
| "xvnmsubadp", "xvnmsubasp", "xvnmsubmdp", "xvnmsubmsp", "xvrdpi", |
| "xvrdpic", "xvrdpim", "xvrdpip", "xvrdpiz", "xvredp", "xvresp", |
| "xvrspi", "xvrspic", "xvrspim", "xvrspip", "xvrspiz", "xvrsqrtedp", |
| "xvrsqrtesp", "xvsqrtdp", "xvsqrtsp", "xvsubdp", "xvsubsp", "xvtdivdp", |
| "xvtdivsp", "xvtsqrtdp", "xvtsqrtsp", "xxland", "xxlandc", "xxlnor", |
| "xxlor", "xxlxor", "xxmrghw", "xxmrglw", "xxsel", "xxsldwi", "xxspltd", |
| "xxspltw", "xxswapd">: Add VSX opcodes. |
| |
| 2009-02-23 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (operand_type_init): Remove OPERAND_TYPE_VEX_IMM4. |
| (operand_types): Remove Vex_Imm4. |
| |
| * i386-opc.h (Vex_Imm4): Removed. |
| (OTMax): Updated. |
| (i386_operand_type): Remove vex_imm4. |
| |
| * i386-opc.tbl: Remove Vex_Imm4 comments. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2009-02-23 Richard Earnshaw <rearnsha@arm.com> |
| |
| * arm-dis.c (neon_opcodes): Correct bit-mask and patterns for |
| vq{r}shr{u}n.s64 insnstructions. |
| |
| 2009-02-19 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * ppc-opc.c (powerpc_opcodes) <"lfdepx", "stfdepx">: Fix the first |
| operand to be a float point register (FRT/FRS). |
| |
| 2009-02-18 Adam Nemet <anemet@caviumnetworks.com> |
| |
| * mips-opc.c (mips_builtin_opcodes): Move the Octeon-specific |
| dmfc2 and dmtc2 before the architecture-level variants. |
| |
| 2009-02-18 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * fr30-opc.c: Regenerate. |
| * frv-opc.c: Regenerate. |
| * ip2k-opc.c: Regenerate. |
| * iq2000-opc.c: Regenerate. |
| * lm32-opc.c: Regenerate. |
| * m32c-opc.c: Regenerate. |
| * m32r-opc.c: Regenerate. |
| * mep-opc.c: Regenerate. |
| * mt-opc.c: Regenerate. |
| * xc16x-opc.c: Regenerate. |
| * xstormy16-opc.c: Regenerate. |
| * tic54x-dis.c (print_instruction): Avoid compiler warning on |
| sprintf call. |
| |
| 2009-02-12 Nathan Sidwell <nathan@codesourcery.com> |
| |
| * m68k-opc.c (m68k_opcodes): Add stldsr instruction. |
| |
| 2009-02-05 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * ppc-opc.c: Update copyright year. |
| (powerpc_opcodes) <"dcbt", "dcbtst">: Deprecate the Embedded operand |
| ordering for POWER4 and later and use the correct Server ordering. |
| |
| 2009-02-04 H.J. Lu <hongjiu.lu@intel.com> |
| |
| AVX Programming Reference (January, 2009) |
| * i386-dis.c (PREFIX_VEX_3A44): New. |
| (VEX_LEN_3A44_P_2): Likewise. |
| (PREFIX_VEX_3A48): Updated. |
| (VEX_LEN_3A4C_P_2): Likewise. |
| (prefix_table): Add PREFIX_VEX_3A44. |
| (vex_table): Likewise. |
| (vex_len_table): Add VEX_LEN_3A44_P_2. |
| |
| * i386-opc.tbl: Add PCLMUL + AVX instructions. |
| * i386-tbl.h: Regenerated. |
| |
| 2009-02-03 Sandip Matte <sandip@rmicorp.com> |
| |
| * mips-dis.c (mips_cp0_names_xlr, mips_cp0sel_names_xlr): Define. |
| (mips_arch_choices): Add XLR entry. |
| * mips-opc.c (XLR): Define. |
| (mips_builtin_opcodes): Add XLR instructions. |
| |
| 2009-02-03 Carlos O'Donell <carlos@codesourcery.com> |
| |
| * Makefile.am: Add install-pdf target. |
| * po/Make-in: Add install-pdf target. |
| * Makefile.in: Regenerate. |
| |
| 2009-02-02 DJ Delorie <dj@redhat.com> |
| |
| * mep-asm.c: Regenerate. |
| * mep-desc.c: Regenerate. |
| * mep-desc.h: Regenerate. |
| * mep-dis.c: Regenerate. |
| * mep-ibld.c: Regenerate. |
| * mep-opc.c: Regenerate. |
| * mep-opc.h: Regenerate. |
| |
| 2009-01-29 Mark Mitchell <mark@codesourcery.com> |
| |
| * arm-dis.c (thumb32_opcodes): Correct decoding for qadd, qdadd, |
| qsub, and qdsub. |
| |
| 2009-01-28 Chao-ying Fu <fu@mips.com> |
| |
| * mips-opc.c (suxc1): Add the flag of FP_D. |
| |
| 2009-01-20 Alan Modra <amodra@bigpond.net.au> |
| |
| * fr30-asm.c, fr30-dis.c, fr30-ibld.c, frv-asm.c, frv-dis.c, |
| * frv-ibld.c, ip2k-asm.c, ip2k-dis.c, ip2k-ibld.c, |
| * iq2000-asm.c, iq2000-dis.c, iq2000-ibld.c, m32c-asm.c, |
| * m32c-dis.c, m32c-ibld.c, m32r-asm.c, m32r-dis.c, |
| * m32r-ibld.c, mep-asm.c, mep-dis.c, mep-ibld.c, mt-asm.c, |
| * mt-dis.c, mt-ibld.c, openrisc-asm.c, openrisc-dis.c, |
| * openrisc-ibld.c, xc16x-asm.c, xc16x-dis.c, xc16x-ibld.c, |
| * xstormy16-asm.c, xstormy16-dis.c, xstormy16-ibld.c: Regenerate. |
| |
| 2009-01-16 Alan Modra <amodra@bigpond.net.au> |
| |
| * configure.in (commonbfdlib): Delete. |
| (SHARED_LIBADD): Add pic libiberty if such is available. |
| * configure: Regenerate. |
| * po/POTFILES.in: Regenerate. |
| |
| 2009-01-14 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * ppc-dis.c (print_insn_powerpc): Skip insn if it is deprecated. |
| * ppc-opc.c (powerpc_opcodes) <mtfsf, mtfsf.>: Deprecate the two |
| operand form and enable the four operand form for POWER6 and later. |
| <mtfsfi, mtfsfi.>: Deprecate the two operand form and enable the |
| three operand form for POWER6 and later. |
| |
| 2009-01-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-dis.c (OUTS): Use "%s" as format string. |
| |
| 2009-01-13 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (cpu_flag_init): Remove a white space. |
| (operand_type_init): Likewise. |
| |
| 2009-01-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-opc.tbl: Add NoAVX to movnti, lfence and mfence. |
| * i386-tbl.h: Regenerated. |
| |
| 2009-01-12 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-dis.c (dis386): Use EbS on addB, orB, adcB, sbbB, andB, |
| subB, xorB and cmpB. Use EvS on addS, orS, adcS, sbbS, andS, |
| subS, xorS and cmpS. |
| |
| 2009-01-10 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (cpu_flag_init): Replace CpuP4 and CpuK6 with |
| CpuClflush and CpuSYSCALL, respectively. Remove CpuK8. Add |
| CPU_COREI7_FLAGS, CPU_CLFLUSH_FLAGS and CPU_SYSCALL_FLAGS. |
| (cpu_flags): Remove CpuP4, CpuK6 and CpuK8. Add CpuClflush |
| and CpuSYSCALL. |
| (lineno): Removed. |
| (set_bitfield): Take an argument, lineno. Don't report lineno |
| on error if it is -1. |
| (process_i386_cpu_flag): Take an argument, lineno. |
| (process_i386_opcode_modifier): Likewise. |
| (process_i386_operand_type): Likewise. |
| (output_i386_opcode): Likewise. |
| (opcode_hash_entry): Add lineno. |
| (process_i386_opcodes): Updated. |
| (process_i386_registers): Likewise. |
| (process_i386_initializers): Likewise. |
| |
| * i386-opc.h (CpuP4): Removed. |
| (CpuK6): Likewise. |
| (CpuK8): Likewise. |
| (CpuClflush): New. |
| (CpuSYSCALL): Likewise. |
| (CpuMMX): Updated. |
| (i386_cpu_flags): Remove cpup4, cpuk6 and cpuk8. Add |
| cpuclflush and cpusyscall. |
| |
| * i386-opc.tbl: Update movnti, clflush, lfence, mfence, pause, |
| syscall and sysret. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2009-01-09 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (cpu_flag_init): Add CpuRdtscp to CPU_K8_FLAGS |
| and CPU_AMDFAM10_FLAGS. Add CPU_RDTSCP_FLAGS. |
| (cpu_flags): Add CpuRdtscp. |
| (set_bitfield): Remove CpuSledgehammer check. |
| |
| * i386-opc.h (CpuRdtscp): New. |
| (CpuLM): Updated. |
| (i386_cpu_flags): Add cpurdtscp. |
| |
| * i386-opc.tbl: Replace CpuSledgehammer with CpuRdtscp. |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2009-01-09 Peter Bergner <bergner@vnet.ibm.com> |
| |
| * ppc-opc.c (PPCNONE): Define. |
| (NOPOWER4): Delete. |
| (powerpc_opcodes): Initialize the new "deprecated" field. |
| |
| 2009-01-06 H.J. Lu <hongjiu.lu@intel.com> |
| |
| AVX Programming Reference (December, 2008) |
| * i386-dis.c (VEX_LEN_2B_M_0): Removed. |
| (VEX_LEN_E7_P_2_M_0): Likewise. |
| (VEX_LEN_2C_P_1): Updated. |
| (VEX_LEN_E8_P_2): Likewise. |
| (vex_len_table): Remove VEX_LEN_2B_M_0 and VEX_LEN_E7_P_2_M_0. |
| (mod_table): Likewise. |
| |
| * i386-opc.tbl: Add 256bit vmovntdq, vmovntpd and vmovntps. |
| * i386-tbl.h: Regenerated. |
| |
| 2009-01-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| * i386-gen.c (process_copyright): Update for 2009. |
| |
| * i386-init.h: Regenerated. |
| * i386-tbl.h: Likewise. |
| |
| 2009-01-05 H.J. Lu <hongjiu.lu@intel.com> |
| |
| AVX Programming Reference (December, 2008) |
| * i386-dis.c (OP_VEX_FMA): Removed. |
| (OP_EX_VexW): Likewise. |
| (OP_EX_VexImmW): Likewise. |
| (OP_XMM_VexW): Likewise. |
| (VEXI4_Fixup): Likewise. |
| (VPERMIL2_Fixup): Likewise. |
| (VexI4): Likewise. |
| (VexFMA): Likewise. |
| (Vex128FMA): Likewise. |
| (EXVexW): Likewise. |
| (EXdVexW): Likewise. |
| (EXqVexW): Likewise. |
| (EXVexImmW): Likewise. |
| (XMVexW): Likewise. |
| (VPERMIL2): Likewise. |
| (PREFIX_VEX_3A48...PREFIX_VEX_3A4A): Likewise. |
| (PREFIX_VEX_3A5C...PREFIX_VEX_3A5F): Likewise. |
| (PREFIX_VEX_3A68...PREFIX_VEX_3A6F): Likewise. |
| (PREFIX_VEX_3A78...PREFIX_VEX_3A7F): Likewise. |
| (VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2): Likewise. |
| (VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2): Likewise. |
| (get_vex_imm8): Likewise. |
| (OP_EX_VexReg): Likewise. |
| vpermil2_op): Likewise. |
| (EXVexWdq): New. |
| (vex_w_dq_mode): Likewise. |
| (PREFIX_VEX_3896...PREFIX_VEX_389F): Likewise. |
| (PREFIX_VEX_38A6...PREFIX_VEX_38AF): Likewise. |
| (PREFIX_VEX_38B6...PREFIX_VEX_38BF): Likewise. |
| (es_reg): Updated. |
| (PREFIX_VEX_38DB): Likewise. |
| (PREFIX_VEX_3A4A): Likewise. |
| (PREFIX_VEX_3A60): Likewise. |
| (PREFIX_VEX_3ADF): Likewise. |
| (VEX_LEN_3ADF_P_2): Likewise. |
| (prefix_table): Remove PREFIX_VEX_3A48...PREFIX_VEX_3A4A, |
| PREFIX_VEX_3A5C...PREFIX_VEX_3A5F, |
| PREFIX_VEX_3A68...PREFIX_VEX_3A6F and |
| PREFIX_VEX_3A78...PREFIX_VEX_3A7F. Add |
| PREFIX_VEX_3896...PREFIX_VEX_389F, |
| PREFIX_VEX_38A6...PREFIX_VEX_38AF and |
| PREFIX_VEX_38B6...PREFIX_VEX_38BF. |
| (vex_table): Likewise. |
| (vex_len_table): Remove VEX_LEN_3A6A_P_2...VEX_LEN_3A6F_P_2 |
| and VEX_LEN_3A7A_P_2...VEX_LEN_3A7F_P_2. |
| (putop): Support "%XW". |
| (intel_operand_size): Handle vex_w_dq_mode. |
| |
| * i386-opc.h (VexNDS): Add a comment for VEX NDS and VEX DDS. |
| |
| * i386-opc.tbl: Remove vpermil2pd/vpermil2ps and old FMA |
| instructions. Add new FMA instructions. |
| * i386-tbl.h: Regenerated. |
| |
| 2009-01-02 Matthias Klose <doko@ubuntu.com> |
| |
| * or32-opc.c (or32_print_register, or32_print_immediate, |
| disassemble_insn): Don't rely on undefined sprintf behaviour. |
| |
| For older changes see ChangeLog-2008 |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| End: |
