| 2011-01-31 Joel Brobecker <brobecker@adacore.com> |
| |
| * configure.ac: Add handling of Python distribution on Windows. |
| * python-config.py: If the LIBS, SYSLIBS, LIBPL and/or LINKFORSHARED |
| sysconfig variables are not defined, then do not use them. |
| On Windows, if LIBPL is not defined, then use prefix + '/libs' |
| instead. On Windows, return all paths using forward-slashes |
| rather than backslashes. |
| |
| 2011-01-31 Joel Brobecker <brobecker@adacore.com> |
| |
| * configure.ac: Remove fallback behavior for building |
| against Python. Remove tweaking of Python include path. |
| Add PYTHON_CPPFLAGS and PYTHON_LIBS substitution. |
| (AC_TRY_LIBPYTHON): Adjust program used in linking test. |
| If link is successful, set PYTHON_CPPFLAGS and PYTHON_LIBS. |
| Always restore CPPFLAGS and LIBS after linking test. |
| * configure: Regenerated. |
| * Makefile.in (INTERNAL_CPPFLAGS): Add @PYTHON_CPPFLAGS@. |
| (INSTALLED_LIBS, CLIBS): Add @PYTHON_LIBS@. |
| * python/python-internal.h: Adjust includes of Python .h files. |
| |
| 2011-01-31 Joel Brobecker <brobecker@adacore.com> |
| |
| * tracepoint.c (traceframe_walk_blocks): Add missing i18n markup |
| in error message. |
| |
| 2011-01-31 Joel Brobecker <brobecker@adacore.com> |
| |
| * inflow.c (gdb_has_a_terminal): Fix typo in interactive_mode |
| value test. |
| |
| 2011-01-31 Yao Qi <yao@codesourcery.com> |
| |
| * arm-linux-nat.c: Update calls to regcache_register_status |
| instead of regcache_valid_p. |
| * aix-thread.c: Likewise. |
| * i386gnu-nat.c: Likewise. |
| |
| 2011-01-29 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Fix crash. |
| * valops.c (compare_parameters): Verify TYPE_NFIELDS before |
| touching TYPE_FIELD_ARTIFICIAL. |
| |
| 2011-01-28 Richard Earnshaw <rearnsha@arm.com> |
| |
| * MAINTAINERS: Move myself from Responsible Maintainers to Authorized |
| Committers. |
| |
| 2011-01-28 Pedro Alves <pedro@codesourcery.com> |
| |
| * tracepoint.c (tfile_xfer_partial): If there's no traceframe |
| selected, don't try iterating over the traceframe's blocks. |
| (tfile_has_stack): If there's no traceframe selected, then there's |
| no stack. |
| (tfile_has_registers): If there's no traceframe selected, then |
| there's no registers. |
| |
| 2011-01-28 Pedro Alves <pedro@codesourcery.com> |
| |
| * target.c (memory_xfer_partial): No need to restore shadows if we |
| haven't read anything. |
| |
| 2011-01-28 Pedro Alves <pedro@codesourcery.com> |
| |
| * mips-tdep.c (mips_print_register): Use get_frame_register_value |
| and val_print_scalar_formatted. |
| |
| 2011-01-27 Pedro Alves <pedro@codesourcery.com> |
| |
| * tracepoint.c (tfile_read): New. |
| (tfile_open): Use it. |
| (tfile_get_traceframe_address): Use it. |
| (tfile_trace_find): Use it. |
| (walk_blocks_callback_func): New typedef. |
| (match_blocktype): New function. |
| (traceframe_walk_blocks): New function. |
| (traceframe_find_block_type): New function. |
| (tfile_fetch_registers, tfile_xfer_partial) |
| (tfile_get_trace_state_variable_value): Use |
| traceframe_find_block_type and tfile_read. |
| |
| 2011-01-26 Kevin Buettner <kevinb@redhat.com> |
| |
| * remote-mips.c: Add internationalization mark ups. Remove |
| trailing \n from already marked up strings. |
| |
| 2011-01-26 Tom Tromey <tromey@redhat.com> |
| |
| * python/py-prettyprint.c (print_string_repr): Clear |
| 'addressprint' option when calling val_print_string. |
| (print_children): Handle Val_pretty_default. Clear 'addressprint' |
| option when calling val_print_string. |
| |
| 2011-01-26 Tom Tromey <tromey@redhat.com> |
| |
| * python/python.c (gdbpy_solib_name): Use gdb_py_longest and |
| GDB_PY_LL_ARG. |
| * python/python-internal.h (GDB_PY_LL_ARG, GDB_PY_LLU_ARG): New |
| macros. |
| (gdb_py_longest, gdb_py_ulongest): New typedefs. |
| (gdb_py_long_from_longest, gdb_py_long_from_ulongest) |
| (gdb_py_long_as_ulongest): New defines. |
| (gdb_py_object_from_longest, gdb_py_object_from_ulongest) |
| (gdb_py_int_as_long): Declare. |
| * python/py-value.c (valpy_lazy_string): Use gdb_py_longest, |
| GDB_PY_LL_ARG, gdb_py_object_from_longest. |
| (valpy_long): Add comment. |
| * python/py-utils.c (get_addr_from_python): Use |
| gdb_py_long_as_ulongest. Handle overflow properly. |
| (gdb_py_object_from_longest): New function. |
| (gdb_py_object_from_ulongest): Likewise. |
| (gdb_py_int_as_long): Likewise. |
| * python/py-type.c (typy_array): Use gdb_py_int_as_long. |
| * python/py-symtab.c (salpy_get_pc): Use |
| gdb_py_long_from_ulongest. |
| (salpy_get_line): Use PyInt_FromLong. |
| * python/py-param.c (set_parameter_value): Use |
| gdb_py_int_as_long. |
| * python/py-lazy-string.c (stpy_get_address): Use |
| gdb_py_long_from_ulongest. |
| * python/py-frame.c (frapy_pc): Use gdb_py_long_from_ulongest. |
| * python/py-cmd.c (cmdpy_completer): Use gdb_py_int_as_long. |
| * python/py-breakpoint.c (bppy_set_thread): Use |
| gdb_py_int_as_long. |
| (bppy_set_task): Likewise. |
| (bppy_set_ignore_count): Likewise. |
| (bppy_set_hit_count): Likewise. |
| * python/py-block.c (blpy_get_start): Use |
| gdb_py_object_from_ulongest. |
| (blpy_get_end): Likewise. |
| (gdbpy_block_for_pc): Use gdb_py_ulongest and GDB_PY_LLU_ARG. |
| |
| 2011-01-25 Mathieu Lacage <mathieu.lacage@inria.fr> |
| |
| PR/symtab 11766: |
| * gdb/objfiles.h (struct objfile) <addr_low>: New field. |
| * gdb/solib.c (solib_read_symbols): Check for addr_low in |
| equality test for objfile, initialize addr_low if needed. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * tui/tui-regs.c (tui_register_format): Remove dead code. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * printcmd.c (print_formatted): Use val_print_scalar_formatted |
| instead of print_scalar_formatted. |
| (print_scalar_formatted): Don't handle 's' format strings here, |
| and add an assertion that we never see such format here. |
| * valprint.h (val_print_scalar_formatted): Declare. |
| * valprint.c (val_print_scalar_formatted): New. |
| * c-valprint.c (c_val_print): Use val_print_scalar_formatted |
| instead of print_scalar_formatted. |
| * jv-valprint.c (java_val_print): Ditto. |
| * p-valprint.c (pascal_val_print): Ditto. |
| * ada-valprint.c (ada_val_print_1): Ditto. |
| * f-valprint.c (f_val_print): Ditto. |
| * infcmd.c (registers_info): Ditto. |
| * m2-valprint.c (m2_val_print): Ditto. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * m2-valprint.c (print_unbounded_array): Pass |
| value_contents_for_printing rather than value_contents, to |
| m2_print_array_contents. Also pass in the value. |
| |
| 2011-01-25 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * dwarf2read.c (dwarf2_read_index, write_psymtabs_to_index) |
| (save_gdb_index_command): Switch to .gdb_index version 4. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * mi/mi-main.c (get_register): Use get_frame_register_value rather |
| than frame_register, and always pass a valid value to val_print. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| Centralize printing "<optimized out>". |
| |
| * valprint.h (val_print_optimized_out): Declare. |
| * cp-valprint.c (cp_print_value_fields): Use |
| val_print_optimized_out. |
| * jv-valprint.c (java_print_value_fields): Ditto. |
| * p-valprint.c (pascal_object_print_value_fields): Ditto. |
| * printcmd.c (print_formatted): Ditto. |
| * valprint.c (valprint_check_validity): Ditto. |
| (value_check_printable): Ditto. |
| (val_print_optimized_out): New. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * infcmd.c (default_print_registers_info): Allocate values so to |
| never pass a NULL value to val_print. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * cp-valprint.c (cp_print_value): Treat the 'skip' local as |
| boolean. Make sure to always pass a value that matches the |
| contents buffer to callees. Preserve `address' for following |
| iterations. |
| * value.c (value_contents_for_printing_const): New. |
| (value_address): Constify value argument. |
| * value.h (value_contents_for_printing_const): Declare. |
| (value_address): Constify value argument. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * regcache.c (struct regcache_descr): Rename |
| sizeof_raw_register_valid_p field to sizeof_raw_register_status, |
| and sizeof_cooked_register_valid_p to |
| sizeof_cooked_register_status. |
| (init_regcache_descr): Adjust. |
| (struct regcache): Rename register_valid_p field to |
| register_status. |
| (regcache_xmalloc_1, regcache_xfree, regcache_save) |
| (do_cooked_read): Adjust. |
| (regcache_valid_p): Rename to ... |
| (regcache_register_status): ... this. Adjust. |
| (regcache_invalidate): Adjust. |
| (regcache_raw_read, regcache_cooked_read, regcache_raw_write): |
| Adjust. |
| (regcache_raw_supply): Adjust. If buf i NULL, mark the register |
| as unavailable, not valid. |
| (regcache_dump): Adjust. |
| * regcache.h (enum register_status): New. |
| (regcache_register_status): Declare. |
| (regcache_invalidate): Delete declaration. |
| * corelow.c (get_core_registers): Adjust. |
| * tracepoint.c (tfile_fetch_registers): Adjust. |
| * trad-frame.c (REG_VALUE): Rename to ... |
| (TF_REG_VALUE): ... this. |
| (REG_UNKNOWN): Rename to ... |
| (TF_REG_UNKNOWN): ... this. |
| (trad_frame_set_value, trad_frame_set_unknown): Adjust. |
| * mi/mi-main.c (register_changed_p): Adjust. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| * regcache.c (struct regcache_descr): Remove outdated comment. |
| (init_regcache_descr): Remove sizeof_raw_register_valid_p |
| overallocate hack. |
| (regcache_xmalloc): Rename to ... |
| (regcache_xmalloc_1): ... this. Add `readonly_p' parameter. |
| Allocate the regcache type accordingly. |
| (regcache_xmalloc): New as wrapper around regcache_xmalloc_1. |
| (regcache_xfree): Asser the source is also readonly. Copy sizeof |
| cooked registers, not raw. |
| (regcache_dup_no_passthrough): Delete. |
| (get_thread_arch_regcache): Use regcache_xmalloc_1. |
| * h8300-tdep.c (h8300_push_dummy_call): Tweak comment to not |
| mention obsolete write_register_bytes. |
| * regcache.h (regcache_dup_no_passthrough): Delete declaration. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| Stop remote_read_bytes from handling partial reads itself. |
| |
| * remote-fileio.c: Include target.h. |
| (remote_fileio_write_bytes): Delete. |
| (remote_fileio_func_open, remote_fileio_func_write) |
| (remote_fileio_func_rename, remote_fileio_func_unlink): Use |
| target_read_memory. |
| (remote_fileio_func_stat): Use target_read_memory and |
| target_write_memory. |
| (remote_fileio_func_gettimeofday): Use target_write_memory. |
| (remote_fileio_func_system): Use target_read_memory. |
| * remote.c (remote_write_bytes): Make it static. |
| (remote_read_bytes): Don't handle partial reads here. |
| * remote.h (remote_read_bytes): Delete declaration. |
| |
| 2011-01-25 Pedro Alves <pedro@codesourcery.com> |
| |
| Simplify XML parsing a bit. |
| |
| * xml-support.h (gdb_xml_parse_quick): Declare. |
| * xml-support.c (gdb_xml_create_parser_and_cleanup_1): Renamed |
| from gdb_xml_create_parser_and_cleanup, and added `old_chain' |
| parameter. |
| (gdb_xml_create_parser_and_cleanup): Reimplement on top of |
| gdb_xml_create_parser_and_cleanup_1. |
| (gdb_xml_parse_quick): New. |
| * memory-map.c (parse_memory_map): Use gdb_xml_parse_quick. |
| * osdata.c (osdata_parse): Ditto. |
| * remote.c (remote_threads_info): Ditto. |
| * solib-target.c (solib_target_parse_libraries): Ditto. |
| * xml-syscall.c (syscall_parse_xml): Ditto. |
| * xml-tdesc.c (tdesc_parse_xml): Ditto. |
| |
| 2011-01-24 Kevin Buettner <kevinb@redhat.com> |
| |
| * configure.tgt (mips*-*-elf): New; just like mips*-*-*, but |
| with remote-mips.o added to gdb_target_obs. |
| * Makefile.in (ALL_TARGET_OBS): Add remote-mips.o. |
| |
| 2011-01-24 Pedro Alves <pedro@codesourcery.com> |
| |
| * ada-valprint.c (val_print_packed_array_elements): Pass the |
| correct struct value to val_print. |
| (ada_val_print_1): Ditto. |
| |
| 2011-01-24 Pedro Alves <pedro@codesourcery.com> |
| |
| Don't lose embedded_offset in printing routines throughout. |
| |
| * valprint.h (val_print_array_elements): Change prototype. |
| * valprint.c (val_print_array_elements): Add `embedded_offset' |
| parameter, and adjust to pass it down to val_print, while passing |
| `valaddr' or `address' unmodified. Take embedded_offset into |
| account when checking repetitions. |
| * c-valprint.c (c_val_print): Pass embedded_offset to |
| val_print_array_elements instead of adjusting `valaddr' and |
| `address'. |
| * m2-valprint.c (m2_print_array_contents, m2_val_print): Pass |
| embedded_offset to val_print_array_elements instead of adjusting |
| `valaddr'. |
| * p-lang.h (pascal_object_print_value_fields): Adjust prototype. |
| * p-valprint.c (pascal_val_print): Pass embedded_offset to |
| val_print_array_elements and pascal_object_print_value_fields |
| instead of adjusting `valaddr'. |
| (pascal_object_print_value_fields): Add `offset' parameter, and |
| adjust to use it. |
| (pascal_object_print_value): Add `offset' parameter, and adjust to |
| use it. |
| (pascal_object_print_static_field): Use |
| value_contents_for_printing/value_embedded_offset, rather than |
| value_contents. |
| * ada-valprint.c (val_print_packed_array_elements): Add `offset' |
| parameter, and adjust to use it. Use |
| value_contents_for_printing/value_embedded_offset, rather than |
| value_contents. |
| (ada_val_print): Rename `valaddr0' parameter to `valaddr'. |
| (ada_val_print_array): Add `offset' parameter, and adjust to use |
| it. |
| (ada_val_print_1): Rename `valaddr0' parameter to `valaddr', and |
| `embedded_offset' to `offset'. Don't re-adjust `valaddr'. |
| Instead work with offsets. Use |
| value_contents_for_printing/value_embedded_offset, rather than |
| value_contents. Change `defer_val_int' local type to CORE_ADDR, |
| and use value_from_pointer to extract a target pointer, rather |
| than value_from_longest. |
| (print_variant_part): Add `offset' parameter. Replace |
| `outer_valaddr' parameter by a new `outer_offset' parameter. |
| Don't re-adjust `valaddr'. Instead pass down adjusted offsets. |
| (ada_value_print): Use |
| value_contents_for_printing/value_embedded_offset, rather than |
| value_contents. |
| (print_record): Add `offset' parameter, and adjust to pass it |
| down. |
| (print_field_values): Add `offset' parameter. Replace |
| `outer_valaddr' parameter by a new `outer_offset' parameter. |
| Don't re-adjust `valaddr'. Instead pass down adjusted offsets. |
| Use value_contents_for_printing/value_embedded_offset, rather than |
| value_contents. |
| * d-valprint.c (dynamic_array_type): Use |
| value_contents_for_printing/value_embedded_offset, rather than |
| value_contents. |
| * jv-valprint.c (java_print_value_fields): Add `offset' parameter. |
| Don't re-adjust `valaddr'. Instead pass down adjusted offsets. |
| (java_print_value_fields): Take `offset' into account. Don't |
| re-adjust `valaddr'. Instead pass down adjusted offsets. |
| (java_val_print): Take `embedded_offset' into account. Pass it to |
| java_print_value_fields. |
| * f-valprint.c (f77_print_array_1): Add `embedded_offset' |
| parameter. Don't re-adjust `valaddr' or `address'. Instead pass |
| down adjusted offsets. |
| (f77_print_array): Add `embedded_offset' parameter. Pass it down. |
| (f_val_print): Take `embedded_offset' into account. |
| |
| 2011-01-21 Joel Brobecker <brobecker@adacore.com> |
| |
| * inflow.c: Include "gdbcmd.h". |
| (interactive_mode): New static global, moved here from top.c. |
| (show_interactive_mode): New function, moved here from top.c. |
| use gdb_has_a_terminal instead of input_from_terminal_p to |
| determine the current mode. |
| (gdb_has_a_terminal): Add handling of the "iteractive-mode" |
| setting. |
| (_initialize_inflow): Add the "set/show interactive-mode" |
| commands. Moved here from top.c, after having adjusted slightly |
| the help text. |
| * top.c (interactive_mode, show_interactive_mode): Delete, moved |
| to inflow.c. |
| (input_from_terminal_p): Remove handling of "interactive-mode" |
| setting, moved to infow.c. |
| (init_main): Remove creation of the "set/show interactive-mode" |
| commands, moved to inflow.c. |
| |
| 2011-01-19 Joel Brobecker <brobecker@adacore.com> |
| |
| * NEWS: Add entry for native ia64-hpux support. |
| |
| 2011-01-19 Tom Tromey <tromey@redhat.com> |
| |
| PR mi/8618: |
| * thread.c (free_thread): Free 'name'. |
| (print_thread_info): Emit thread name. Change CLI output. |
| (thread_name_command): New function. |
| (do_captured_thread_select): Emit newline. |
| (_initialize_thread): Register 'thread name' command. |
| * target.h (struct target_ops) <to_thread_name>: New field. |
| (target_thread_name): New macro. |
| * target.c (update_current_target): Handle to_thread_name. |
| * python/py-infthread.c (thpy_get_name): New function. |
| (thpy_set_name): Likewise. |
| (thread_object_getset): Add "name". |
| * linux-nat.c (linux_nat_thread_name): New function. |
| (linux_nat_add_target): Set to_thread_name. |
| * gdbthread.h (struct thread_info) <name>: New field. |
| |
| 2011-01-18 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-valprint.c (ada_print_scalar): Remove unsigned char downcast. |
| (ada_val_print_1): Likewise. |
| |
| 2011-01-18 Joel Brobecker <brobecker@adacore.com> |
| |
| * rs6000-tdep.c (rs6000_skip_prologue): Make sure that the prologue |
| upper limit address is not greater than the function end address |
| when the upper limit could not be computed using the debugging |
| info. |
| |
| 2011-01-17 Tom Tromey <tromey@redhat.com> |
| |
| * cli/cli-cmds.c (apropos_command): Free the compiled regex. Use |
| get_regcomp_error. |
| * utils.c: Include gdb_regex.h. |
| (do_regfree_cleanup): New function. |
| (make_regfree_cleanup): Likewise. |
| (get_regcomp_error): Likewise. |
| * gdb_regex.h (make_regfree_cleanup, get_regcomp_error): Declare. |
| |
| 2011-01-17 Tom Tromey <tromey@redhat.com> |
| |
| * cli/cli-cmds.c (apropos_command): Fix formatting. Don't call |
| re_compile_fastmap. |
| |
| 2011-01-17 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * p-exp.y (intvar): New static variable, used to set CURRENT_TYPE |
| for internal variables. |
| (last_was_structop): New static variable. |
| (COMPLETE): New token. |
| (field_exp): New rule to group all '.' suffix handling. |
| Add mark_struct_expression calls when approriate to be able |
| to correctly find fields for completion. |
| (yylex): Adapt to handle field completion and set INTVAR when |
| required. |
| |
| 2011-01-14 Yao Qi <yao@codesourcery.com> |
| |
| * arm-tdep.c (arm_register_reggroup_p): FPS register is in |
| save_reggroup, restore_reggroup and all_reggroup. |
| |
| 2011-01-14 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-valprint. (ada_printchar): Use the correct type length |
| in call to ada_emit_char. |
| * c-valprint.c (c_val_print): Remove cast in call to LA_PRINT_CHAR. |
| |
| 2011-01-14 Pierre Muller <muller@ics.u-strasbg.fr> |
| |
| * solib-som.h (hpux_major_release): Declare variable here. |
| * solib-som.c: Remove <sys/utsname.h> header. |
| (DEFAULT_HPUX_MAJOR_RELEASE): New macro. |
| (hpux_major_release): Make global, change default value to |
| DEFAULT_HPUX_MAJOR_RELEASE. |
| (get_hpux_major_release): Simply return HPUX_MAJOR_RELEASE. |
| * hppa-hpux-nat.c: Add <sys/utsname.h> include. |
| Add "solib-som.h" header. |
| (set_hpux_major_release): New function. |
| (_initialize_hppa_hpux_nat): Call set_hpux_major_release. |
| |
| 2011-01-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.tgt (*-*-uclinux*): Match more Linux os targets |
| |
| 2011-01-14 Joel Brobecker <brobecker@adacore.com> |
| |
| * ia64-hpux-nat.c (ia64_hpux_fetch_register): Remove trailing |
| new-line at end of warning message. |
| (ia64_hpux_store_register): Remove trailing new-line at end of |
| error message. |
| * ia64-hpux-tdep.c: Rephrase comment. |
| * solib-ia64-hpux.c (struct dld_info): Change type of field |
| dld_flags from "long long" to ULONGEST. |
| |
| 2011-01-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * target.h (deprecated_child_ops): Delete declaration. |
| * target.c (deprecated_child_ops): Delete definition. |
| |
| 2011-01-14 Pedro Alves <pedro@codesourcery.com> |
| |
| * Makefile.in (hpux-thread.o): Delete rule. |
| * configure.ac: Don't check for HPUX DCE threads support. |
| * configure, config.in: Regenerate. |
| * hppa-hpux-nat.c (child_suppress_run): Delete. |
| (hppa_hpux_child_can_run): Delete. |
| (_initialize_hppa_hpux_nat): Don't override to_can_run. |
| * hpux-thread.c: Delete. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * hpux-thread.c (hpux_pid_to_str): Delete. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-valprint.c (ada_emit_char): Remove strange code. |
| Check that c is <= UCHAR_MAX before passing it to isascii. |
| (char_at): Do not assume that TYPE_LEN is either 1 or 2. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * top.c (input_from_terminal_p): Restrict the use of interactive_mode |
| to the case where instream is stdin. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * ia64-tdep.h (struct regcache): Forward declare. |
| (struct ia64_infcall_ops): New struct type. |
| (struct gdbarch_tdep): New fields "find_global_pointer_from_solib" |
| and "infcall_ops". |
| * ia64-tdep.c (ia64_find_global_pointer_from_dynamic_section): |
| Renames ia64_find_global_pointer. |
| (ia64_find_global_pointer, ia64_allocate_new_rse_frame) |
| (ia64_store_argument_in_slot, ia64_set_function_addr: New function. |
| (ia64_push_dummy_call): Adjust to use the new tdep ia64_infocall_ops |
| methods. |
| (ia64_infcall_ops): New static global constant. |
| (ia64_gdbarch_init): Set tdep->infcall_ops. |
| * ia64-hpux-nat.c (ia64_hpux_xfer_solib_got): New function. |
| (ia64_hpux_xfer_partial): Add TARGET_OBJECT_HPUX_SOLIB_GOT handing. |
| * ia64-hpux-tdep.c: Include "regcache.h", "gdbcore.h" and "inferior.h". |
| (ia64_hpux_dummy_code): New static global constant. |
| (ia64_hpux_push_dummy_code, ia64_hpux_allocate_new_rse_frame) |
| (ia64_hpux_store_argument_in_slot, ia64_hpux_set_function_addr) |
| (ia64_hpux_dummy_id, ia64_hpux_find_global_pointer_from_solib): |
| New function. |
| (ia64_hpux_infcall_ops): New static global constant. |
| (ia64_hpux_init_abi): Install gdbarch and tdep methods needed |
| for inferior function calls to work properly on ia64-hpux. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * target.h (enum target_object): Add TARGET_OBJECT_HPUX_UREGS. |
| * ia64-tdep.h (struct frame_info): forward declaration. |
| (struct gdbarch_tdep): Add field size_of_register_frame. |
| * ia64-tdep.c (ia64_access_reg): Use tdep->size_of_register_frame |
| to determine the size of the register frame. |
| (ia64_size_of_register_frame): New function. |
| (ia64_gdbarch_init): Set tdep->size_of_register_frame. |
| * ia64-hpux-tdep.c: Include "target.h" and "frame.h". |
| (IA64_HPUX_UREG_REASON): New macro. |
| (ia64_hpux_stopped_in_syscall, ia64_hpux_size_of_register_frame): |
| New functions. |
| (ia64_hpux_init_abi): Set tdep->size_of_register_frame. |
| * ia64-hpux-nat.c (ia64_hpux_xfer_uregs): New function. |
| (ia64_hpux_xfer_partial): Add handling of TARGET_OBJECT_HPUX_UREGS |
| objects. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| Add support for ia64-hpux. |
| * config/ia64/hpux.mh, ia64-hpux-nat.c, ia64-hpux-tdep.c, |
| ia64-hpux-tdep.h, solib-ia64-hpux.c, solib-ia64-hpux.h: New files. |
| |
| * configure.host: Add handling for ia64-hpux hosts. Add associated |
| floatformats. |
| * configure.tgt: Add handling for ia64-hpux targets. |
| * Makefile.in (ALL_64_TARGET_OBS): Add ia64-hpux-tdep.o. |
| (HFILES_NO_SRCDIR): Add ia64-hpux-tdep.h. |
| (ALLDEPFILES): Add ia64-hpux-nat.c ia64-hpux-tdep.c. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| [ttrace] Compute thread list immediately after attach. |
| * inf_ttrace_attach (inf_ttrace_create_threads_after_attach): |
| New subprogram. |
| (inf_ttrace_attach): Use it. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * libunwind-frame.c (libunwind_frame_cache): Do not return NULL |
| if we could not determine the frame's function address. Instead, |
| use the frame's PC, and then continue. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * libunwind-frame.c (__LITTLE_ENDIAN, __BIG_ENDIAN): Define if |
| not already defined. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * ia64-tdep.c (ia64_struct_type_p): New function. |
| (ia64_extract_return_value): Handle integral values that are |
| less than 8 bytes long. |
| (ia64_push_dummy_call): Likewise. |
| |
| 2011-01-13 Joel Brobecker <brobecker@adacore.com> |
| |
| * ia64-tdep.c (floatformat_ia64_ext_little): Renames |
| floatformat_ia64_ext. |
| (floatformat_ia64_ext_big): New static const. |
| (floatformats_ia64_ext): Set first entry to &floatformat_ia64_ext_big. |
| |
| 2011-01-12 Tom Tromey <tromey@redhat.com> |
| |
| * mi/mi-symbol-cmds.c (mi_cmd_symbol_list_lines): Fix error |
| messages. |
| * mi/mi-main.c (mi_cmd_thread_select): Fix error messages. |
| (mi_cmd_thread_list_ids): Likewise. |
| (mi_cmd_data_list_changed_registers): Likewise. |
| (mi_cmd_data_list_register_values): Likewise. |
| (mi_cmd_data_write_register_values): Likewise. |
| (mi_cmd_data_evaluate_expression): Likewise. |
| (mi_cmd_data_read_memory): Likewise. |
| (mi_cmd_data_read_memory_bytes): Likewise. |
| (mi_cmd_data_write_memory): Likewise. |
| (mi_cmd_enable_timings): Likewise. |
| * mi/mi-interp.c (mi_cmd_interpreter_exec): Fix error messages. |
| * mi/mi-cmd-var.c (mi_cmd_var_create): Fix error messages. |
| (mi_cmd_var_delete): Likewise. |
| (mi_cmd_var_set_format): Likewise. |
| (mi_cmd_var_show_format): Likewise. |
| (mi_cmd_var_info_num_children): Likewise. |
| (mi_cmd_var_list_children): Likewise. |
| (mi_cmd_var_info_type): Likewise. |
| (mi_cmd_var_info_expression): Likewise. |
| (mi_cmd_var_show_attributes): Likewise. |
| (mi_cmd_var_assign): Likewise. |
| (mi_cmd_var_update): Likewise. |
| (mi_cmd_enable_pretty_printing): Likewise. |
| (mi_cmd_var_set_update_range): Likewise. |
| * mi/mi-cmd-target.c (mi_cmd_target_file_get): Fix error |
| messages. |
| (mi_cmd_target_file_put): Likewise. |
| (mi_cmd_target_file_delete): Likewise. |
| * mi/mi-cmd-stack.c (mi_cmd_stack_list_frames): Fix error |
| messages. |
| (mi_cmd_stack_info_depth): Likewise. |
| (mi_cmd_stack_list_locals): Likewise. |
| (mi_cmd_stack_list_args): Likewise. |
| (mi_cmd_stack_select_frame): Likewise. |
| (mi_cmd_stack_select_frame): Likewise. |
| (mi_cmd_stack_info_frame): Likewise. |
| * mi/mi-cmd-file.c (mi_cmd_file_list_exec_source_file): Fix error |
| messages. |
| (mi_cmd_file_list_exec_source_files): Likewise. |
| * mi/mi-cmd-env.c (mi_cmd_env_pwd): Fix error messages. |
| (mi_cmd_env_cd): Likewise. |
| (mi_cmd_env_path): Likewise. |
| (mi_cmd_env_dir): Likewise. |
| (mi_cmd_inferior_tty_show): Likewise. |
| * mi/mi-cmd-disas.c (mi_cmd_disassemble): Fix error messages. |
| * mi/mi-cmd-break.c (mi_cmd_break_insert): Fix error messages. |
| (mi_cmd_break_watch): Likewise. |
| |
| 2011-01-12 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * ppc-linux-nat.c (booke_cmp_hw_point): Fix whitespace. |
| (ppc_linux_insert_hw_breakpoint): Likewise. |
| (ppc_linux_remove_hw_breakpoint): Likewise. |
| (ppc_linux_insert_watchpoint): Likewise. |
| |
| 2011-01-12 Andrew Burgess <aburgess@broadcom.com> |
| Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| PR fortran/11104 and DWARF unbound arrays detection. |
| * dwarf2read.c (read_subrange_type): Set zero length on unspecified |
| upper bound. Set TYPE_HIGH_BOUND_UNDEFINED if not language_ada on |
| unspecified upper bound. |
| * eval.c (evaluate_subexp_standard) <multi_f77_subscript>: Remove |
| variables array_size_array, tmp_type and offset_item. New variable |
| array. Remove call to f77_get_upperbound. New variables array_type |
| and index. Call value_subscripted_rvalue for each dimenasion. Remove |
| the final call to deprecated_set_value_type. |
| |
| 2011-01-12 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| Make value allocations more lazy. |
| * ada-lang.c (coerce_unspec_val_to_type): Use allocate_value_lazy |
| instead of allocate_value and set_value_lazy when possible. |
| * dwarf2loc.c (dwarf2_evaluate_loc_desc_full): Use allocate_value_lazy |
| instead of allocate_value and set_value_lazy. |
| * findvar.c (value_of_register_lazy): Likewise. |
| (read_var_value): Remove V preallocation, call just check_typedef in |
| advance. Move allocate_value to LOC_CONST, LOC_LABEL, |
| LOC_CONST_BYTES. Use allocate_value_lazy in LOC_STATIC, LOC_ARG, |
| LOC_REF_ARG, LOC_LOCAL, LOC_BLOCK. Set ADDR instead of |
| set_value_address and break in LOC_BLOCK. Use allocate_value_lazy and |
| remove lval_memory set in LOC_REGPARM_ADDR. Use allocate_value_lazy |
| in LOC_UNRESOLVED and LOC_OPTIMIZED_OUT. Add setting lval_memory at |
| the end, remove set_value_lazy there. |
| * valarith.c (value_subscripted_rvalue): Use allocate_value_lazy |
| instead of allocate_value and set_value_lazy when possible. |
| * valops.c (value_fetch_lazy): Do nop for value_optimized_out VAL. |
| * value.c (allocate_computed_value): Use allocate_value_lazy instead |
| of allocate_value and set_value_lazy. |
| (value_from_contents_and_address): Use allocate_value_lazy instead of |
| allocate_value and set_value_lazy when possible. |
| |
| 2011-01-12 Andrew Burgess <aburgess@broadcom.com> |
| |
| * disasm.c (dump_insns): Support dumping opcodes for MI. |
| * mi/mi-cmd-disas.c (mi_cmd_disassemble): Allow mode to control |
| dumping of instruction opcodes. |
| |
| 2011-01-09 Robert Millan <rmh@gnu.org> (tiny patch) |
| |
| * configure.tgt: Detect GNU/kFreeBSD and set `gdb_osabi' |
| appropiately. |
| |
| 2011-01-11 Tom Tromey <tromey@redhat.com> |
| |
| * thread.c (do_captured_thread_select): Emit newline before |
| printing frame. |
| |
| 2011-01-11 Michael Snyder <msnyder@vmware.com> |
| |
| * s390-tdep.c: Comment cleanup, mostly periods and spaces. |
| * score-tdep.c: Ditto. |
| * score-tdep.h: Ditto. |
| * ser-base.c: Ditto. |
| * ser-go32.c: Ditto. |
| * serial.c: Ditto. |
| * serial.h: Ditto. |
| * ser-mingw.c: Ditto. |
| * ser-pipe.c: Ditto. |
| * ser-tcp.c: Ditto. |
| * ser-unix.c: Ditto. |
| * sh64-tdep.c: Ditto. |
| * shnbsd-nat.c: Ditto. |
| * sh-tdep.c: Ditto. |
| * sh-tdep.h: Ditto. |
| * solib.c: Ditto. |
| * solib-darwin.c: Ditto. |
| * solib-frv.c: Ditto. |
| * solib.h: Ditto. |
| * solib-irix.c: Ditto. |
| * solib-osf.c: Ditto. |
| * solib-pa64.c: Ditto. |
| * solib-som.c: Ditto. |
| * solib-spu.c: Ditto. |
| * solib-sunos.c: Ditto. |
| * solib-svr4.c: Ditto. |
| * solist.h: Ditto. |
| * sol-thread.c: Ditto. |
| * somread.c: Ditto. |
| * source.c: Ditto. |
| * source.h: Ditto. |
| * sparc64-linux-tdep.c: Ditto. |
| * sparc64-tdep.c: Ditto. |
| * sparc-linux-nat.c: Ditto. |
| * sparc-linux-tdep.c: Ditto. |
| * sparc-sol2-nat.c: Ditto. |
| * sparc-sol2-tdep.c: Ditto. |
| * sparc-tdep.c: Ditto. |
| * sparc-tdep.h: Ditto. |
| * spu-tdep.c: Ditto. |
| * stabsread.c: Ditto. |
| * stabsread.h: Ditto. |
| * stack.c: Ditto. |
| * symfile.c: Ditto. |
| * symfile.h: Ditto. |
| * symmisc.c: Ditto. |
| * symtab.c: Ditto. |
| * symtab.h: Ditto. |
| * target.c: Ditto. |
| * target-descriptions.c: Ditto. |
| * target-descriptions.h: Ditto. |
| * target.h: Ditto. |
| * target-memory.c: Ditto. |
| * terminal.h: Ditto. |
| * thread.c: Ditto. |
| * top.c: Ditto. |
| * tracepoint.c: Ditto. |
| * tracepoint.h: Ditto. |
| * trad-frame.h: Ditto. |
| * typeprint.c: Ditto. |
| |
| 2011-01-11 Michael Snyder <msnyder@vmware.com> |
| |
| * ui-file.c: Comment cleanup, mostly periods and spaces. |
| * ui-file.h: Ditto. |
| * ui-out.c: Ditto. |
| * ui-out.h: Ditto. |
| * utils.c: Ditto. |
| * v850-tdep.c: Ditto. |
| * valarith.c: Ditto. |
| * valops.c: Ditto. |
| * valprint.c: Ditto. |
| * valprint.h: Ditto. |
| * value.c: Ditto. |
| * value.h: Ditto. |
| * varobj.c: Ditto. |
| * varobj.h: Ditto. |
| * vax-tdep.c: Ditto. |
| * vec.c: Ditto. |
| * vec.h: Ditto. |
| * version.h: Ditto. |
| * windows-nat.c: Ditto. |
| * windows-tdep.c: Ditto. |
| * xcoffread.c: Ditto. |
| * xcoffsolib.c: Ditto. |
| * xml-support.c: Ditto. |
| * xstormy16-tdep.c: Ditto. |
| * xtensa-tdep.c: Ditto. |
| * xtensa-tdep.h: Ditto. |
| |
| 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * breakpoint.c (resources_needed_watchpoint): Fix indentation. |
| * gdbtypes.c (is_scalar_type_recursive): Fix formatting. |
| |
| 2011-01-11 Sergio Durigan Junior <sergiodj@linux.vnet.ibm.com> |
| Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| Implement support for PowerPC BookE ranged watchpoints. |
| * breakpoint.h |
| (struct breakpoint_ops) <resources_needed>: New method. |
| Initialize to NULL in all existing breakpoint_ops instances. |
| (struct breakpoint) <exact>: New field. |
| (target_exact_watchpoints): Declare external global. |
| * breakpoint.c (target_exact_watchpoints): New global flag. |
| (update_watchpoint): Set b->type to bp_hardware_watchpoint and |
| b->enable_state to bp_enabled before calling |
| hw_watchpoint_used_count. |
| (hw_watchpoint_used_count): Iterate over all bp_locations in a |
| watchpoint. Call breakpoint's breakpoint_ops.resources_needed |
| if available. |
| (insert_watchpoint, remove_watchpoint): Use fixed length of 1 byte |
| if the watchpoint is exact. |
| (resources_needed_watchpoint): New function. |
| (watchpoint_breakpoint_ops): Add resources_needed_watchpoint. |
| (watch_command_1): Set b->exact if the user asked for an exact |
| watchpoint and one can be set. |
| (can_use_hardware_watchpoint): Add exact_watchpoints argument. |
| Pass fixed length of 1 to target_region_ok_for_hw_watchpoint if |
| the user asks for an exact watchpoint and one can be set. Return |
| number of needed debug registers to watch the expression. |
| * gdbtypes.c (is_scalar_type): New function, based on |
| valprint.c:scalar_type_p. |
| (is_scalar_type_recursive): New function. |
| * gdbtypes.h (is_scalar_type_recursive): Declare. |
| * ppc-linux-nat.c (ppc_linux_region_ok_for_hw_watchpoint): Always |
| handle regions when ranged watchpoints are available. |
| (create_watchpoint_request): New function. |
| (ppc_linux_insert_watchpoint, ppc_linux_remove_watchpoint): Use |
| create_watchpoint_request. |
| * rs6000-tdep.c (show_powerpc_exact_watchpoints): New function. |
| (_initialize_rs6000_tdep): Add `exact-watchpoints' boolean to the |
| `set powerpc' and `show powerpc' commands. |
| * target.h (struct target_ops) <to_region_ok_for_hw_watchpoint>: |
| Mention documentation comment in the target macro. |
| (target_region_ok_for_hw_watchpoint): Document return value. |
| |
| 2011-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| * breakpoint.c (update_watchpoint): Decide on using a software or |
| hardware watchpoint after the bp_locations are created. |
| |
| 2010-01-11 Thiago Jung Bauermann <bauerman@br.ibm.com> |
| |
| Convert hardware watchpoints to use breakpoint_ops. |
| * breakpoint.h (breakpoint_ops) <insert>: Rename to... |
| <insert_location>: ... this. Return int instead of void. |
| Accept pointer to struct bp_location instead of pointer to |
| struct breakpoint. Adapt all implementations. |
| (breakpoint_ops) <remove>: Rename to... |
| <remove_location>: ... this. Accept pointer to struct bp_location |
| instead of pointer to struct breakpoint. Adapt all implementations. |
| * breakpoint.c (insert_catchpoint): Delete function. |
| (insert_bp_location): Call the watchpoint or catchpoint's |
| breakpoint_ops.insert method. |
| (remove_breakpoint_1): Call the watchpoint or catchpoint's |
| breakpoint_ops.remove method. |
| (insert_watchpoint, remove_watchpoint): New functions. |
| (watchpoint_breakpoint_ops): New structure. |
| (watch_command_1): Initialize the OPS field. |
| * inf-child.c (inf_child_insert_fork_catchpoint) |
| (inf_child_remove_fork_catchpoint, inf_child_insert_vfork_catchpoint) |
| (inf_child_remove_vfork_catchpoint, inf_child_insert_exec_catchpoint) |
| (inf_child_remove_exec_catchpoint, inf_child_set_syscall_catchpoint): |
| Delete functions. |
| (inf_child_target): Remove initialization of to_insert_fork_catchpoint, |
| to_remove_fork_catchpoint, to_insert_vfork_catchpoint, |
| to_remove_vfork_catchpoint, to_insert_exec_catchpoint, |
| to_remove_exec_catchpoint and to_set_syscall_catchpoint. |
| * target.c (update_current_target): Change default implementation of |
| to_insert_fork_catchpoint, to_remove_fork_catchpoint, |
| to_insert_vfork_catchpoint, to_remove_vfork_catchpoint, |
| to_insert_exec_catchpoint, to_remove_exec_catchpoint and |
| to_set_syscall_catchpoint to return_one. |
| (debug_to_insert_fork_catchpoint, debug_to_insert_vfork_catchpoint) |
| (debug_to_insert_exec_catchpoint): Report return value. |
| * target.h (to_insert_fork_catchpoint, to_insert_vfork_catchpoint) |
| (to_insert_exec_catchpoint): Change declaration to return int instead |
| of void. |
| |
| 2011-01-11 Michael Snyder <msnyder@vmware.com> |
| |
| * arm-tdep.c: Internationalization. |
| * c-lang.c: Ditto. |
| * charset.c: Ditto. |
| * fork-child.c: Ditto. |
| * nto-procfs.c: Ditto. |
| * ppc-sysv-tdep.c: Ditto. |
| * procfs.c: Ditto. |
| * remote-mips.c: Ditto. |
| * remote.c: Ditto. |
| * rs6000-nat.c: Ditto. |
| * rs6000-tdep.c: Ditto. |
| * target.c: Ditto. |
| * valops.c: Ditto. |
| * value.c: Ditto. |
| * xml-support.c: Ditto. |
| * mi/mi-cmd-break.c: Ditto. |
| * mi/mi-cmd-var.c: Ditto. |
| * mi/mi-interp.c: Ditto. |
| * mi/mi-main.c: Ditto. |
| |
| 2011-01-11 Andrew Burgess <aburgess@broadcom.com> |
| |
| * remote-sim.c (gdbsim_store_register): Update API to |
| sim_store_register to check more error conditions. |
| |
| 2011-01-10 Michael Snyder <msnyder@vmware.com> |
| |
| * nto-procfs.c: Comment cleanup, mostly periods and spaces. |
| * nto-tdep.c: Ditto. |
| * nto-tdep.h: Ditto. |
| * objc-exp.y: Ditto. |
| * objc-lang.c: Ditto. |
| * objfiles.c: Ditto. |
| * objfiles.h: Ditto. |
| * observer.c: Ditto. |
| * opencl-lang.c: Ditto. |
| * osabi.c: Ditto. |
| * parse.c: Ditto. |
| * parser-defs.h: Ditto. |
| * p-exp.y: Ditto. |
| * p-lang.c: Ditto. |
| * posix-hdep.c: Ditto. |
| * ppcbug-rom.c: Ditto. |
| * ppc-linux-nat.c: Ditto. |
| * ppc-linux-tdep.c: Ditto. |
| * ppc-linux-tdep.h: Ditto. |
| * ppcnbsd-tdep.c: Ditto. |
| * ppcobsd-tdep.c: Ditto. |
| * ppcobsd-tdep.h: Ditto. |
| * ppc-sysv-tdep.c: Ditto. |
| * ppc-tdep.h: Ditto. |
| * printcmd.c: Ditto. |
| * proc-abi.c: Ditto. |
| * proc-flags.c: Ditto. |
| * procfs.c: Ditto. |
| * proc-utils.h: Ditto. |
| * progspace.h: Ditto. |
| * prologue-value.c: Ditto. |
| * prologue-value.h: Ditto. |
| * psympriv.h: Ditto. |
| * psymtab.c: Ditto. |
| * p-typeprint.c: Ditto. |
| * p-valprint.c: Ditto. |
| * ravenscar-sparc-thread.c: Ditto. |
| * ravenscar-thread.c: Ditto. |
| * ravenscar-thread.h: Ditto. |
| * record.c: Ditto. |
| * regcache.c: Ditto. |
| * regcache.h: Ditto. |
| * remote.c: Ditto. |
| * remote-fileio.c: Ditto. |
| * remote-fileio.h: Ditto. |
| * remote.h: Ditto. |
| * remote-m32r-sdi.c: Ditto. |
| * remote-mips.c: Ditto. |
| * remote-sim.c: Ditto. |
| * rs6000-aix-tdep.c: Ditto. |
| * rs6000-nat.c: Ditto. |
| * rs6000-tdep.c: Ditto. |
| |
| 2011-01-10 Michael Snyder <msnyder@vmware.com> |
| |
| * charset.c (validate): Internationalization. |
| * coffread.c (read_one_sym): Ditto. |
| * dwarf2read.c (dwarf2_attach_fields_to_type): Ditto. |
| * h8300-tdep.c (H8300_extract_return_value): Ditto. |
| * inflow.c (new_tty): Ditto. |
| * iq2000-tdep.c (iq2000_breakpoint_from_pc): Ditto. |
| * m32c-tdep.c (m32c_return_value): Ditto. |
| * mep-tdep.c (mep_store_return_value): Ditto. |
| * score-tdep.c (score7_fetch_insn): Ditto. |
| * ser-mingw.c (pipe_windows_open): Ditto. |
| * sh64-tdep.c (sh64_extract_return_value): Ditto. |
| * spu-tdep.c (spu_register_type): Ditto. |
| * tracepoint.c (trace_find_command): Ditto. |
| * valarith.c (value_pos): Ditto. |
| |
| 2011-01-10 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-valprint.c (printstr): Minor comment reformatting. |
| |
| 2011-01-08 Michael Snyder <msnyder@vmware.com> |
| |
| * m32r-rom.c (m32r_upload_command): Fix up ARI warnings for _ |
| markup. |
| |
| 2011-01-08 Michael Snyder <msnyder@vmware.com> |
| |
| * h8300-tdep.c: Comment cleanup, mostly periods and spaces. |
| * hppa-hpux-tdep.c: Ditto. |
| * hppa-linux-nat.c: Ditto. |
| * hppa-linux-tdep.c: Ditto. |
| * hppanbsd-tdep.c: Ditto. |
| * hppa-tdep.c: Ditto. |
| * hppa-tdep.h: Ditto. |
| * hpux-thread.c: Ditto. |
| * i386-cygwin-tdep.c: Ditto. |
| * i386-darwin-nat.c: Ditto. |
| * i386gnu-nat.c: Ditto. |
| * i386-linux-nat.c: Ditto. |
| * i386-linux-tdep.c: Ditto. |
| * i386-nat.c: Ditto. |
| * i386-nat.h: Ditto. |
| * i386nbsd-tdep.c: Ditto. |
| * i386-sol2-nat.c: Ditto. |
| * i386-stub.c: Ditto. |
| * i386-tdep.c: Ditto. |
| * i386-tdep.h: Ditto. |
| * i387-tdep.c: Ditto. |
| * ia64-linux-nat.c: Ditto. |
| * ia64-linux-tdep.c: Ditto. |
| * ia64-tdep.c: Ditto. |
| * infcall.c: Ditto. |
| * infcall.h: Ditto. |
| * infcmd.c: Ditto. |
| * inferior.c: Ditto. |
| * inferior.h: Ditto. |
| * infloop.c: Ditto. |
| * inflow.c: Ditto. |
| * infrun.c: Ditto. |
| * interps.c: Ditto. |
| * interps.h: Ditto. |
| * iq2000-tdep.c: Ditto. |
| * irix5-nat.c: Ditto. |
| * jit.c: Ditto. |
| * jit.h: Ditto. |
| * jv-exp.y: Ditto. |
| * jv-lang.c: Ditto. |
| * jv-lang.h: Ditto. |
| * jv-typeprint.c: Ditto. |
| * jv-valprint.c: Ditto. |
| * language.c: Ditto. |
| * language.h: Ditto. |
| * linespec.c: Ditto. |
| * linux-fork.c: Ditto. |
| * linux-nat.c: Ditto. |
| * linux-thread-db.c: Ditto. |
| * lm32-tdep.c: Ditto. |
| |
| 2011-01-08 Michael Snyder <msnyder@vmware.com> |
| |
| * m2-exp.y: Comment cleanup, mostly periods and spaces. |
| * m2-lang.c: Ditto. |
| * m2-typeprint.c: Ditto. |
| * m2-valprint.c: Ditto. |
| * m32c-tdep.c: Ditto. |
| * m32r-linux-nat.c: Ditto. |
| * m32r-rom.c: Ditto. |
| * m32r-tdep.c: Ditto. |
| * m32r-tdep.h: Ditto. |
| * m68hc11-tdep.c: Ditto. |
| * m58klinux-nat.c: Ditto. |
| * m68k-tdep.c: Ditto. |
| * m88k-tdep.c: Ditto. |
| * m88k-tdep.h: Ditto. |
| * machoread.c: Ditto. |
| * macrocmd.c: Ditto. |
| * macroexp.c: Ditto. |
| * macrotab.c: Ditto. |
| * main.c: Ditto. |
| * maint.c: Ditto. |
| * mdebugread.c: Ditto. |
| * mdebugread.h: Ditto. |
| * memattr.c: Ditto. |
| * memattr.h: Ditto. |
| * memory-map.h: Ditto. |
| * mep-tdep.c: Ditto. |
| * microblaze-rom.c: Ditto. |
| * microblaze-tdep.c: Ditto. |
| * minsyms.c: Ditto. |
| * mips-irix-tdep.c: Ditto. |
| * mips-linux-nat.c: Ditto. |
| * mips-linux-tdep.c: Ditto. |
| * mips-linux-tdep.h: Ditto. |
| * mipsnbsd-nat.c: Ditto. |
| * mipsnbsd-tdep.c: Ditto. |
| * mipsread.c: Ditto. |
| * mips-tdep.c: Ditto. |
| * mips-tdep.h: Ditto. |
| * mn10300-linux-tdep.c: Ditto. |
| * mn10300-tdep.c: Ditto. |
| * mn10300-tdep.h: Ditto. |
| * monitor.c: Ditto. |
| * monitor.h: Ditto. |
| * moxie-tdep.c: Ditto. |
| * moxie-tdep.h: Ditto. |
| * mt-tdep.c: Ditto. |
| |
| 2011-01-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * bfin-tdep.h (BFIN_A0_DOT_W_REGNUM): Fix typo in name. |
| |
| 2011-01-08 Robert Millan <rmh@gnu.org> |
| |
| * fbsd-nat.c (fbsd_find_memory_regions): Fix typo. |
| |
| 2011-01-07 Michael Snyder <msnyder@vmware.com> |
| |
| * charset.c (_initialize_charset): Fix typo in string. |
| |
| 2011-01-07 Michael Snyder <msnyder@vmware.com> |
| |
| * mi/mi-cmd-disas.c (mi_cmd_disassemble): Mark up error message |
| for i18n. |
| * tui/tui-layout.c (tui_set_layout_for_display_command): |
| Split line so that operator goes to beginning of line. |
| * tui/tui-winsource.c (tui_horizontal_source_scroll): Move |
| assignment out of if statement. |
| |
| 2011-01-07 Michael Snyder <msnyder@vmware.com> |
| |
| * ada-lang.c: Comment cleanup, mostly periods and spaces. |
| * ada-lang.h: Ditto. |
| * ada-tasks.c: Ditto. |
| * ada-valprint.c: Ditto. |
| * aix-threads.c: Ditto. |
| * alpha-linux-nat.c: Ditto. |
| * alpha-linux-tdep.c: Ditto. |
| * alpha-mdebug-tdep.c: Ditto. |
| * alpha-nat.c: Ditto. |
| * alpha-osf1-tdep.c: Ditto. |
| * alpha-tdep.c: Ditto. |
| * alphabsd-nat.c: Ditto. |
| * alphabsd-tdep.c: Ditto. |
| * amd64-darwin-tdep.c: Ditto. |
| * amd64-linux-nat.c: Ditto. |
| * amd64-linux-tdep.c: Ditto. |
| * amd64-sol2-tdep.c: Ditto. |
| * amd64-tdep.c: Ditto. |
| * amd64-fbsd-tdep.c: Ditto. |
| * amd64-nbsd-tdep.c: Ditto. |
| * amd64-obsd-tdep.c: Ditto. |
| * amd64-linux-nat.c: Ditto. |
| * amd64-linux-tdep.c: Ditto. |
| * arm-tdep.c: Ditto. |
| * arm-tdep.h: Ditto. |
| * armnbsd-nat.c: Ditto. |
| * avr-tdep.c: Ditto. |
| * bfin-tdep.c: Ditto. |
| * bsd-kvm.c: Ditto. |
| * c-typeprintc: Ditto. |
| * c-valprint.c: Ditto. |
| * coff-pe-read.h: Ditto. |
| * coffreead.c: Ditto. |
| * cris-tdep.c: Ditto. |
| * d-lang.c: Ditto. |
| * darwin-nat-info.c: Ditto. |
| * darwin-nat.c: Ditto. |
| * dbug-rom.c: Ditto. |
| * dbxread.c: Ditto. |
| * dcache.c: Ditto. |
| * dcache.h: Ditto. |
| * dec-thread.c: Ditto. |
| * defs.h: Ditto. |
| * demangle.c: Ditto. |
| * dicos-tdep.c: Ditto. |
| * dictionary.c: Ditto. |
| * dictionary.h: Ditto. |
| * dink32-rom.c: Ditto. |
| * disasm.c: Ditto. |
| * doublest.c: Ditto. |
| * dsrec.c: Ditto. |
| * dummy-frame.c: Ditto. |
| * dwarf2-frame.c: Ditto. |
| * dwarf2expr.c: Ditto. |
| * dwarf2loc.c: Ditto. |
| * dwarf2read.c: Ditto. |
| * elfread.c: Ditto. |
| * environ.c: Ditto. |
| * eval.c: Ditto. |
| * event-top.h: Ditto. |
| * exceptions.c: Ditto. |
| * exceptions.h: Ditto. |
| * exec.c: Ditto. |
| * expprint.c: Ditto. |
| * expression.h: Ditto. |
| * f-exp.y: Ditto. |
| * f-lang.c: Ditto. |
| * f-lang.h: Ditto. |
| * f-typeprint.c: Ditto. |
| * f-valprint.c: Ditto. |
| * fbsd-nat.c: Ditto. |
| * findvar.c: Ditto. |
| * fork-child.c: Ditto. |
| * frame.c: Ditto. |
| * frame.h: Ditto. |
| * frv-linux-tdep.c: Ditto. |
| * frv-tdep.c: Ditto. |
| * gcore.c: Ditto. |
| * gdb-stabs.h: Ditto. |
| * gdb_assert.h: Ditto. |
| * gdb_string.h: Ditto. |
| * gdb_thread_db.h: Ditto. |
| * gdb_wait.h: Ditto. |
| * gdbarch.sh: Ditto. |
| * gdbcore.h: Ditto. |
| * gdbthread.h: Ditto. |
| * gdbtypes.c: Ditto. |
| * gdbtypes.h: Ditto. |
| * gnu-nat.c: Ditto. |
| * gnu-nat.h: Ditto. |
| * gnu-v2-abi.c: Ditto. |
| * gnu-v3-abi.c: Ditto. |
| * go32-nat.c: Ditto. |
| * gdbarch.c: Regenerate. |
| * gdbarch.h: Regenerate. |
| |
| 2011-01-07 Michael Snyder <msnyder@vmware.com> |
| |
| * ax-gdb.c: Adjust some long output strings. |
| * breakpoint.c: Ditto. |
| * charset.c: Ditto. |
| * cp-abi.c: Ditto. |
| * infcall.c: Ditto. |
| * infrun.c: Ditto. |
| * linux-nat.c: Ditto. |
| * solib-pa64.c: Ditto. |
| * solib-som.c: Ditto. |
| |
| 2011-01-06 Tom Tromey <tromey@redhat.com> |
| |
| PR python/12367: |
| * NEWS: Add item. |
| * python/python.c (GdbMethods): Add "newest_frame" method. |
| * python/python-internal.h (gdbpy_newest_frame): Declare. |
| * python/py-frame.c (gdbpy_newest_frame): New function. |
| |
| 2010-01-06 Paul Pluzhnikov <ppluzhnikov@google.com> |
| |
| * jit.h (struct jit_code_entry): use ULONGEST for symfile_size. |
| * jit.c (jit_debug): New variable. |
| (show_jit_debug): New function. |
| (struct target_buffer): Use ULONGEST. |
| (bfd_open_from_target_memory): Likewise. |
| (jit_register_code, jit_inferior_init): Add debug output. |
| (_initialize_jit): Register "debug jit" command. |
| |
| 2011-01-06 Tom Tromey <tromey@redhat.com> |
| |
| * frame.h (enum frame_type) <INLINE_FRAME>: Fix comment. |
| * python/py-frame.c (gdbpy_initialize_frames): Add INLINE_FRAME |
| and ARCH_FRAME. |
| |
| 2011-01-06 Tom Tromey <tromey@redhat.com> |
| |
| * python/py-frame.c (frapy_block): Use get_frame_block. |
| |
| 2011-01-06 Joel Brobecker <brobecker@adacore.com> |
| |
| Do not stop on SIGPRIO signals by default |
| * infrun.c (_initialize_infrun): Unset signal_stop and |
| signal_print for TARGET_SIGNAL_PRIO. |
| |
| 2011-01-06 Joel Brobecker <brobecker@adacore.com> |
| |
| * ada-tasks.c: Fix style violation in comment. |
| |
| 2011-01-06 Joel Brobecker <brobecker@adacore.com> |
| |
| * linespec.c (decode_compound, find_method): Remove trailing \n |
| at end of error string. |
| * solib-irix.c (irix_current_sos): Likewise. |
| * varobj.c (uninstall_variable): Likewise. |
| |
| 2011-01-06 Joel Brobecker <brobecker@adacore.com> |
| |
| * copyright.py: New script. |
| * copyright.sh (byhand): Add *.ads, *.adb, *.gpr and *.inc. |
| Launch emacs without exec'ing. Call copyright.py afterwards. |
| |
| 2011-01-05 Michael Snyder <msnyder@vmware.com> |
| |
| * addrmap.c: Shorten lines of >= 80 columns. |
| * arch-utils.c: Ditto. |
| * arch-utils.h: Ditto. |
| * ax-gdb.c: Ditto. |
| * ax-general.c: Ditto. |
| * bcache.c: Ditto. |
| * blockframe.c: Ditto. |
| * breakpoint.c: Ditto. |
| * buildsym.c: Ditto. |
| * c-lang.c: Ditto. |
| * c-typeprint.c: Ditto. |
| * charset.c: Ditto. |
| * coffread.c: Ditto. |
| * command.h: Ditto. |
| * corelow.c: Ditto. |
| * cp-abi.c: Ditto. |
| * cp-namespace.c: Ditto. |
| * cp-support.c: Ditto. |
| * dbug-rom.c: Ditto. |
| * dbxread.c: Ditto. |
| * defs.h: Ditto. |
| * dfp.c: Ditto. |
| * dfp.h: Ditto. |
| * dictionary.c: Ditto. |
| * disasm.c: Ditto. |
| * doublest.c: Ditto. |
| * dwarf2-frame.c: Ditto. |
| * dwarf2expr.c: Ditto. |
| * dwarf2loc.c: Ditto. |
| * dwarf2read.c: Ditto. |
| * elfread.c: Ditto. |
| * eval.c: Ditto. |
| * event-loop.c: Ditto. |
| * event-loop.h: Ditto. |
| * exceptions.h: Ditto. |
| * exec.c: Ditto. |
| * expprint.c: Ditto. |
| * expression.h: Ditto. |
| * f-lang.c: Ditto. |
| * f-valprint.c: Ditto. |
| * findcmd.c: Ditto. |
| * frame-base.c: Ditto. |
| * frame-unwind.c: Ditto. |
| * frame-unwind.h: Ditto. |
| * frame.c: Ditto. |
| * frame.h: Ditto. |
| * gcore.c: Ditto. |
| * gdb-stabs.h: Ditto. |
| * gdb_assert.h: Ditto. |
| * gdb_dirent.h: Ditto. |
| * gdb_obstack.h: Ditto. |
| * gdbcore.h: Ditto. |
| * gdbtypes.c: Ditto. |
| * gdbtypes.h: Ditto. |
| * inf-ttrace.c: Ditto. |
| * infcall.c: Ditto. |
| * infcmd.c: Ditto. |
| * inflow.c: Ditto. |
| * infrun.c: Ditto. |
| * inline-frame.h: Ditto. |
| * language.c: Ditto. |
| * language.h: Ditto. |
| * libunwind-frame.c: Ditto. |
| * libunwind-frame.h: Ditto. |
| * linespec.c: Ditto. |
| * linux-nat.c: Ditto. |
| * linux-nat.h: Ditto. |
| * linux-thread-db.c: Ditto. |
| * machoread.c: Ditto. |
| * macroexp.c: Ditto. |
| * macrotab.c: Ditto. |
| * main.c: Ditto. |
| * maint.c: Ditto. |
| * mdebugread.c: Ditto. |
| * memattr.c: Ditto. |
| * minsyms.c: Ditto. |
| * monitor.c: Ditto. |
| * monitor.h: Ditto. |
| * objfiles.c: Ditto. |
| * objfiles.h: Ditto. |
| * osabi.c: Ditto. |
| * p-typeprint.c: Ditto. |
| * p-valprint.c: Ditto. |
| * parse.c: Ditto. |
| * printcmd.c: Ditto. |
| * proc-events.c: Ditto. |
| * procfs.c: Ditto. |
| * progspace.c: Ditto. |
| * progspace.h: Ditto. |
| * psympriv.h: Ditto. |
| * psymtab.c: Ditto. |
| * record.c: Ditto. |
| * regcache.c: Ditto. |
| * regcache.h: Ditto. |
| * remote-fileio.c: Ditto. |
| * remote.c: Ditto. |
| * ser-mingw.c: Ditto. |
| * ser-tcp.c: Ditto. |
| * ser-unix.c: Ditto. |
| * serial.c: Ditto. |
| * serial.h: Ditto. |
| * solib-frv.c: Ditto. |
| * solib-irix.c: Ditto. |
| * solib-osf.c: Ditto. |
| * solib-pa64.c: Ditto. |
| * solib-som.c: Ditto. |
| * solib-sunos.c: Ditto. |
| * solib-svr4.c: Ditto. |
| * solib-target.c: Ditto. |
| * solib.c: Ditto. |
| * somread.c: Ditto. |
| * source.c: Ditto. |
| * stabsread.c: Ditto. |
| * stabsread.c: Ditto. |
| * stack.c: Ditto. |
| * stack.h: Ditto. |
| * symfile-mem.c: Ditto. |
| * symfile.c: Ditto. |
| * symfile.h: Ditto. |
| * symmisc.c: Ditto. |
| * symtab.c: Ditto. |
| * symtab.h: Ditto. |
| * target-descriptions.c: Ditto. |
| * target-memory.c: Ditto. |
| * target.c: Ditto. |
| * target.h: Ditto. |
| * terminal.h: Ditto. |
| * thread.c: Ditto. |
| * top.c: Ditto. |
| * tracepoint.c: Ditto. |
| * tracepoint.h: Ditto. |
| * ui-file.c: Ditto. |
| * ui-file.h: Ditto. |
| * ui-out.h: Ditto. |
| * user-regs.c: Ditto. |
| * user-regs.h: Ditto. |
| * utils.c: Ditto. |
| * valarith.c: Ditto. |
| * valops.c: Ditto. |
| * valprint.c: Ditto. |
| * valprint.h: Ditto. |
| * value.c: Ditto. |
| * varobj.c: Ditto. |
| * varobj.h: Ditto. |
| * vec.h: Ditto. |
| * xcoffread.c: Ditto. |
| * xcoffsolib.c: Ditto. |
| * xcoffsolib.h: Ditto. |
| * xml-syscall.c: Ditto. |
| * xml-tdesc.c: Ditto. |
| |
| 2011-01-05 Michael Snyder <msnyder@vmware.com> |
| |
| * cli/cli-cmds.c: Shorten lines of >= 80 columns. |
| * cli/cli-decode.c: Ditto. |
| * cli/cli-dump.c: Ditto. |
| * cli/cli-logging.c: Ditto. |
| * cli/cli-script.c: Ditto. |
| * cli/cli-setshow.c: Ditto. |
| * common/signals.c: Ditto. |
| * mi/mi-cmd-break.c: Ditto. |
| * mi/mi-cmd-disas.c: Ditto. |
| * mi/mi-cmd-stack.c: Ditto. |
| * mi/mi-cmd-var.c: Ditto. |
| * mi/mi-cmds.c: Ditto. |
| * mi/mi-common.h: Ditto. |
| * mi/mi-console.c: Ditto. |
| * mi/mi-interp.c: Ditto. |
| * mi/mi-main.c: Ditto. |
| * osf-share/cma_attr.c: Ditto. |
| * osf-share/cma_deb_core.h: Ditto. |
| * osf-share/cma_debug_client.h: Ditto. |
| * osf-share/cma_handle.h: Ditto. |
| * osf-share/cma_mutex.h: Ditto. |
| * osf-share/cma_stack_int.h: Ditto. |
| * osf-share/cma_tcb_defs.h: Ditto. |
| * python/py-auto-load.c: Ditto. |
| * python/py-breakpoint.c: Ditto. |
| * python/py-cmd.c: Ditto. |
| * python/py-frame.c: Ditto. |
| * python/py-objfile.c: Ditto. |
| * python/py-param.c: Ditto. |
| * python/py-progspace.c: Ditto. |
| * python/py-symbol.c: Ditto. |
| * python/py-value.c: Ditto. |
| * python/python-internal.h: Ditto. |
| * python/python.c: Ditto. |
| * tui/tui-data.c: Ditto. |
| * tui/tui-disasm.c: Ditto. |
| * tui/tui-hooks.c: Ditto. |
| * tui/tui-io.c: Ditto. |
| * tui/tui-layout.c: Ditto. |
| * tui/tui-regs.c: Ditto. |
| * tui/tui-source.c: Ditto. |
| * tui/tui-stack.c: Ditto. |
| * tui/tui-win.c: Ditto. |
| * tui/tui-windata.c: Ditto. |
| * tui/tui-winsource.c: Ditto. |
| |
| 2011-01-05 Joel Brobecker <brobecker@adacore.com> |
| |
| * configure.ac, gdb.1: Copyright year update. |
| |
| 2011-01-03 Jan Kratochvil <jan.kratochvil@redhat.com> |
| |
| * frame.c (get_prev_frame_1) <UNWIND_INNER_ID>: New variables |
| this_pc_in_block, morestack_msym and morestack_name. Check for |
| "__morestack" minimal symbol there. |
| |
| 2011-01-03 Joel Brobecker <brobecker@adacore.com> |
| |
| * symfile.c (find_sym_fns): Add call to dont_repeat. |
| |
| 2011-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| Copyright year update in most files (performed by copyright.sh). |
| |
| 2011-01-01 Joel Brobecker <brobecker@adacore.com> |
| |
| * top.c (print_gdb_version): Update copyright year in version output. |
| |
| For older changes see ChangeLog-2010. |
| |
| Local Variables: |
| mode: change-log |
| left-margin: 8 |
| fill-column: 74 |
| version-control: never |
| coding: utf-8 |
| End: |
