gdb/gdbserver/linux-arm-low.c

/* GNU/Linux/ARM specific low level interface, for the remote server for GDB.
   Copyright (C) 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
   2006, 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.

   This file is part of GDB.

   This program is free software; you can redistribute it and/or modify
   it under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3 of the License, or
   (at your option) any later version.

   This program is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
   GNU General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */

#include "server.h"
#include "linux-low.h"

/* Don't include elf.h if linux/elf.h got included by gdb_proc_service.h.
   On Bionic elf.h and linux/elf.h have conflicting definitions.  */
#ifndef ELFMAG0
#include <elf.h>
#endif
#include <sys/ptrace.h>
#include <signal.h>

/* Defined in auto-generated files.  */
void init_registers_arm (void);
void init_registers_arm_with_iwmmxt (void);
void init_registers_arm_with_vfpv2 (void);
void init_registers_arm_with_vfpv3 (void);
void init_registers_arm_with_neon (void);

#ifndef PTRACE_GET_THREAD_AREA
#define PTRACE_GET_THREAD_AREA 22
#endif

#ifndef PTRACE_GETWMMXREGS
# define PTRACE_GETWMMXREGS 18
# define PTRACE_SETWMMXREGS 19
#endif

#ifndef PTRACE_GETVFPREGS
# define PTRACE_GETVFPREGS 27
# define PTRACE_SETVFPREGS 28
#endif

#ifndef PTRACE_GETHBPREGS
#define PTRACE_GETHBPREGS 29
#define PTRACE_SETHBPREGS 30
#endif

/* Information describing the hardware breakpoint capabilities.  */
static struct
{
  unsigned char arch;
  unsigned char max_wp_length;
  unsigned char wp_count;
  unsigned char bp_count;
} arm_linux_hwbp_cap;

/* Enum describing the different types of ARM hardware break-/watch-points.  */
typedef enum
{
  arm_hwbp_break = 0,
  arm_hwbp_load = 1,
  arm_hwbp_store = 2,
  arm_hwbp_access = 3
} arm_hwbp_type;

/* Type describing an ARM Hardware Breakpoint Control register value.  */
typedef unsigned int arm_hwbp_control_t;

/* Structure used to keep track of hardware break-/watch-points.  */
struct arm_linux_hw_breakpoint
{
  /* Address to break on, or being watched.  */
  unsigned int address;
  /* Control register for break-/watch- point.  */
  arm_hwbp_control_t control;
};

/* Since we cannot dynamically allocate subfields of arch_process_info,
   assume a maximum number of supported break-/watchpoints.  */
#define MAX_BPTS 32
#define MAX_WPTS 32

/* Per-process arch-specific data we want to keep.  */
struct arch_process_info
{
  /* Hardware breakpoints for this process.  */
  struct arm_linux_hw_breakpoint bpts[MAX_BPTS];
  /* Hardware watchpoints for this process.  */
  struct arm_linux_hw_breakpoint wpts[MAX_WPTS];
};

/* Per-thread arch-specific data we want to keep.  */
struct arch_lwp_info
{
  /* Non-zero if our copy differs from what's recorded in the thread.  */
  char bpts_changed[MAX_BPTS];
  char wpts_changed[MAX_WPTS];
  /* Cached stopped data address.  */
  CORE_ADDR stopped_data_address;
};

static unsigned long arm_hwcap;

/* These are in <asm/elf.h> in current kernels.  */
#define HWCAP_VFP       64
#define HWCAP_IWMMXT    512
#define HWCAP_NEON      4096
#define HWCAP_VFPv3     8192
#define HWCAP_VFPv3D16  16384

#ifdef HAVE_SYS_REG_H
#include <sys/reg.h>
#endif

#define arm_num_regs 26

static int arm_regmap[] = {
  0, 4, 8, 12, 16, 20, 24, 28,
  32, 36, 40, 44, 48, 52, 56, 60,
  -1, -1, -1, -1, -1, -1, -1, -1, -1,
  64
};

static int
arm_cannot_store_register (int regno)
{
  return (regno >= arm_num_regs);
}

static int
arm_cannot_fetch_register (int regno)
{
  return (regno >= arm_num_regs);
}

static void
arm_fill_gregset (struct regcache *regcache, void *buf)
{
  int i;

  for (i = 0; i < arm_num_regs; i++)
    if (arm_regmap[i] != -1)
      collect_register (regcache, i, ((char *) buf) + arm_regmap[i]);
}

static void
arm_store_gregset (struct regcache *regcache, const void *buf)
{
  int i;
  char zerobuf[8];

  memset (zerobuf, 0, 8);
  for (i = 0; i < arm_num_regs; i++)
    if (arm_regmap[i] != -1)
      supply_register (regcache, i, ((char *) buf) + arm_regmap[i]);
    else
      supply_register (regcache, i, zerobuf);
}

static void
arm_fill_wmmxregset (struct regcache *regcache, void *buf)
{
  int i;

  if (!(arm_hwcap & HWCAP_IWMMXT))
    return;

  for (i = 0; i < 16; i++)
    collect_register (regcache, arm_num_regs + i, (char *) buf + i * 8);

  /* We only have access to wcssf, wcasf, and wcgr0-wcgr3.  */
  for (i = 0; i < 6; i++)
    collect_register (regcache, arm_num_regs + i + 16,
		      (char *) buf + 16 * 8 + i * 4);
}

static void
arm_store_wmmxregset (struct regcache *regcache, const void *buf)
{
  int i;

  if (!(arm_hwcap & HWCAP_IWMMXT))
    return;

  for (i = 0; i < 16; i++)
    supply_register (regcache, arm_num_regs + i, (char *) buf + i * 8);

  /* We only have access to wcssf, wcasf, and wcgr0-wcgr3.  */
  for (i = 0; i < 6; i++)
    supply_register (regcache, arm_num_regs + i + 16,
		     (char *) buf + 16 * 8 + i * 4);
}

static void
arm_fill_vfpregset (struct regcache *regcache, void *buf)
{
  int i, num, base;

  if (!(arm_hwcap & HWCAP_VFP))
    return;

  if ((arm_hwcap & (HWCAP_VFPv3 | HWCAP_VFPv3D16)) == HWCAP_VFPv3)
    num = 32;
  else
    num = 16;

  base = find_regno ("d0");
  for (i = 0; i < num; i++)
    collect_register (regcache, base + i, (char *) buf + i * 8);

  collect_register_by_name (regcache, "fpscr", (char *) buf + 32 * 8);
}

static void
arm_store_vfpregset (struct regcache *regcache, const void *buf)
{
  int i, num, base;

  if (!(arm_hwcap & HWCAP_VFP))
    return;

  if ((arm_hwcap & (HWCAP_VFPv3 | HWCAP_VFPv3D16)) == HWCAP_VFPv3)
    num = 32;
  else
    num = 16;

  base = find_regno ("d0");
  for (i = 0; i < num; i++)
    supply_register (regcache, base + i, (char *) buf + i * 8);

  supply_register_by_name (regcache, "fpscr", (char *) buf + 32 * 8);
}

extern int debug_threads;

static CORE_ADDR
arm_get_pc (struct regcache *regcache)
{
  unsigned long pc;
  collect_register_by_name (regcache, "pc", &pc);
  if (debug_threads)
    fprintf (stderr, "stop pc is %08lx\n", pc);
  return pc;
}

static void
arm_set_pc (struct regcache *regcache, CORE_ADDR pc)
{
  unsigned long newpc = pc;
  supply_register_by_name (regcache, "pc", &newpc);
}

/* Correct in either endianness.  */
static const unsigned long arm_breakpoint = 0xef9f0001;
#define arm_breakpoint_len 4
static const unsigned short thumb_breakpoint = 0xde01;
static const unsigned short thumb2_breakpoint[] = { 0xf7f0, 0xa000 };

/* For new EABI binaries.  We recognize it regardless of which ABI
   is used for gdbserver, so single threaded debugging should work
   OK, but for multi-threaded debugging we only insert the current
   ABI's breakpoint instruction.  For now at least.  */
static const unsigned long arm_eabi_breakpoint = 0xe7f001f0;

static int
arm_breakpoint_at (CORE_ADDR where)
{
  struct regcache *regcache = get_thread_regcache (current_inferior, 1);
  unsigned long cpsr;

  collect_register_by_name (regcache, "cpsr", &cpsr);

  if (cpsr & 0x20)
    {
      /* Thumb mode.  */
      unsigned short insn;

      (*the_target->read_memory) (where, (unsigned char *) &insn, 2);
      if (insn == thumb_breakpoint)
	return 1;

      if (insn == thumb2_breakpoint[0])
	{
	  (*the_target->read_memory) (where + 2, (unsigned char *) &insn, 2);
	  if (insn == thumb2_breakpoint[1])
	    return 1;
	}
    }
  else
    {
      /* ARM mode.  */
      unsigned long insn;

      (*the_target->read_memory) (where, (unsigned char *) &insn, 4);
      if (insn == arm_breakpoint)
	return 1;

      if (insn == arm_eabi_breakpoint)
	return 1;
    }

  return 0;
}

/* We only place breakpoints in empty marker functions, and thread locking
   is outside of the function.  So rather than importing software single-step,
   we can just run until exit.  */
static CORE_ADDR
arm_reinsert_addr (void)
{
  struct regcache *regcache = get_thread_regcache (current_inferior, 1);
  unsigned long pc;
  collect_register_by_name (regcache, "lr", &pc);
  return pc;
}

/* Fetch the thread-local storage pointer for libthread_db.  */

ps_err_e
ps_get_thread_area (const struct ps_prochandle *ph,
		    lwpid_t lwpid, int idx, void **base)
{
  if (ptrace (PTRACE_GET_THREAD_AREA, lwpid, NULL, base) != 0)
    return PS_ERR;

  /* IDX is the bias from the thread pointer to the beginning of the
     thread descriptor.  It has to be subtracted due to implementation
     quirks in libthread_db.  */
  *base = (void *) ((char *)*base - idx);

  return PS_OK;
}


/* Query Hardware Breakpoint information for the target we are attached to
   (using PID as ptrace argument) and set up arm_linux_hwbp_cap.  */
static void
arm_linux_init_hwbp_cap (int pid)
{
  unsigned int val;

  if (ptrace (PTRACE_GETHBPREGS, pid, 0, &val) < 0)
    return;

  arm_linux_hwbp_cap.arch = (unsigned char)((val >> 24) & 0xff);
  if (arm_linux_hwbp_cap.arch == 0)
    return;

  arm_linux_hwbp_cap.max_wp_length = (unsigned char)((val >> 16) & 0xff);
  arm_linux_hwbp_cap.wp_count = (unsigned char)((val >> 8) & 0xff);
  arm_linux_hwbp_cap.bp_count = (unsigned char)(val & 0xff);

  if (arm_linux_hwbp_cap.wp_count > MAX_WPTS)
    internal_error (__FILE__, __LINE__, "Unsupported number of watchpoints");
  if (arm_linux_hwbp_cap.bp_count > MAX_BPTS)
    internal_error (__FILE__, __LINE__, "Unsupported number of breakpoints");
}

/* How many hardware breakpoints are available?  */
static int
arm_linux_get_hw_breakpoint_count (void)
{
  return arm_linux_hwbp_cap.bp_count;
}

/* How many hardware watchpoints are available?  */
static int
arm_linux_get_hw_watchpoint_count (void)
{
  return arm_linux_hwbp_cap.wp_count;
}

/* Maximum length of area watched by hardware watchpoint.  */
static int
arm_linux_get_hw_watchpoint_max_length (void)
{
  return arm_linux_hwbp_cap.max_wp_length;
}

/* Initialize an ARM hardware break-/watch-point control register value.
   BYTE_ADDRESS_SELECT is the mask of bytes to trigger on; HWBP_TYPE is the
   type of break-/watch-point; ENABLE indicates whether the point is enabled.
   */
static arm_hwbp_control_t
arm_hwbp_control_initialize (unsigned byte_address_select,
			     arm_hwbp_type hwbp_type,
			     int enable)
{
  gdb_assert ((byte_address_select & ~0xffU) == 0);
  gdb_assert (hwbp_type != arm_hwbp_break
	      || ((byte_address_select & 0xfU) != 0));

  return (byte_address_select << 5) | (hwbp_type << 3) | (3 << 1) | enable;
}

/* Does the breakpoint control value CONTROL have the enable bit set?  */
static int
arm_hwbp_control_is_enabled (arm_hwbp_control_t control)
{
  return control & 0x1;
}

/* Is the breakpoint control value CONTROL initialized?  */
static int
arm_hwbp_control_is_initialized (arm_hwbp_control_t control)
{
  return control != 0;
}

/* Change a breakpoint control word so that it is in the disabled state.  */
static arm_hwbp_control_t
arm_hwbp_control_disable (arm_hwbp_control_t control)
{
  return control & ~0x1;
}

/* Are two break-/watch-points equal?  */
static int
arm_linux_hw_breakpoint_equal (const struct arm_linux_hw_breakpoint *p1,
			       const struct arm_linux_hw_breakpoint *p2)
{
  return p1->address == p2->address && p1->control == p2->control;
}

/* Initialize the hardware breakpoint structure P for a breakpoint or
   watchpoint at ADDR to LEN.  The type of watchpoint is given in TYPE.
   Returns -1 if TYPE is unsupported, 0 if TYPE represents a breakpoint,
   and 1 if type represents a watchpoint.  */
static int
arm_linux_hw_point_initialize (char type, CORE_ADDR addr, int len,
			       struct arm_linux_hw_breakpoint *p)
{
  arm_hwbp_type hwbp_type;
  unsigned mask;

  /* Breakpoint/watchpoint types (GDB terminology):
     0 = memory breakpoint for instructions
     (not supported; done via memory write instead)
     1 = hardware breakpoint for instructions (supported)
     2 = write watchpoint (supported)
     3 = read watchpoint (supported)
     4 = access watchpoint (supported).  */
  switch (type)
    {
    case '1':
      hwbp_type = arm_hwbp_break;
      break;
    case '2':
      hwbp_type = arm_hwbp_store;
      break;
    case '3':
      hwbp_type = arm_hwbp_load;
      break;
    case '4':
      hwbp_type = arm_hwbp_access;
      break;
    default:
      /* Unsupported.  */
      return -1;
    }

  if (hwbp_type == arm_hwbp_break)
    {
      /* For breakpoints, the length field encodes the mode.  */
      switch (len)
	{
	case 2:	 /* 16-bit Thumb mode breakpoint */
	case 3:  /* 32-bit Thumb mode breakpoint */
	  mask = 0x3 << (addr & 2);
	  break;
	case 4:  /* 32-bit ARM mode breakpoint */
	  mask = 0xf;
	  break;
	default:
	  /* Unsupported. */
	  return -1;
	}

      addr &= ~3;
    }
  else
    {
      CORE_ADDR max_wp_length = arm_linux_get_hw_watchpoint_max_length ();
      CORE_ADDR aligned_addr;

      /* Can not set watchpoints for zero or negative lengths.  */
      if (len <= 0)
	return -1;
      /* The current ptrace interface can only handle watchpoints that are a
	 power of 2.  */
      if ((len & (len - 1)) != 0)
	return -1;

      /* Test that the range [ADDR, ADDR + LEN) fits into the largest address
	 range covered by a watchpoint.  */
      aligned_addr = addr & ~(max_wp_length - 1);
      if (aligned_addr + max_wp_length < addr + len)
	return -1;

      mask = (1 << len) - 1;
    }

  p->address = (unsigned int) addr;
  p->control = arm_hwbp_control_initialize (mask, hwbp_type, 1);

  return hwbp_type != arm_hwbp_break;
}

/* Callback to mark a watch-/breakpoint to be updated in all threads of
   the current process.  */

struct update_registers_data
{
  int watch;
  int i;
};

static int
update_registers_callback (struct inferior_list_entry *entry, void *arg)
{
  struct lwp_info *lwp = (struct lwp_info *) entry;
  struct update_registers_data *data = (struct update_registers_data *) arg;

  /* Only update the threads of the current process.  */
  if (pid_of (lwp) == pid_of (get_thread_lwp (current_inferior)))
    {
      /* The actual update is done later just before resuming the lwp,
         we just mark that the registers need updating.  */
      if (data->watch)
	lwp->arch_private->wpts_changed[data->i] = 1;
      else
	lwp->arch_private->bpts_changed[data->i] = 1;

      /* If the lwp isn't stopped, force it to momentarily pause, so
         we can update its breakpoint registers.  */
      if (!lwp->stopped)
        linux_stop_lwp (lwp);
    }

  return 0;
}

/* Insert hardware break-/watchpoint.  */
static int
arm_insert_point (char type, CORE_ADDR addr, int len)
{
  struct process_info *proc = current_process ();
  struct arm_linux_hw_breakpoint p, *pts;
  int watch, i, count;

  watch = arm_linux_hw_point_initialize (type, addr, len, &p);
  if (watch < 0)
    {
      /* Unsupported.  */
      return 1;
    }

  if (watch)
    {
      count = arm_linux_get_hw_watchpoint_count ();
      pts = proc->private->arch_private->wpts;
    }
  else
    {
      count = arm_linux_get_hw_breakpoint_count ();
      pts = proc->private->arch_private->bpts;
    }

  for (i = 0; i < count; i++)
    if (!arm_hwbp_control_is_enabled (pts[i].control))
      {
	struct update_registers_data data = { watch, i };
	pts[i] = p;
	find_inferior (&all_lwps, update_registers_callback, &data);
	return 0;
      }

  /* We're out of watchpoints.  */
  return -1;
}

/* Remove hardware break-/watchpoint.  */
static int
arm_remove_point (char type, CORE_ADDR addr, int len)
{
  struct process_info *proc = current_process ();
  struct arm_linux_hw_breakpoint p, *pts;
  int watch, i, count;

  watch = arm_linux_hw_point_initialize (type, addr, len, &p);
  if (watch < 0)
    {
      /* Unsupported.  */
      return -1;
    }

  if (watch)
    {
      count = arm_linux_get_hw_watchpoint_count ();
      pts = proc->private->arch_private->wpts;
    }
  else
    {
      count = arm_linux_get_hw_breakpoint_count ();
      pts = proc->private->arch_private->bpts;
    }

  for (i = 0; i < count; i++)
    if (arm_linux_hw_breakpoint_equal (&p, pts + i))
      {
	struct update_registers_data data = { watch, i };
	pts[i].control = arm_hwbp_control_disable (pts[i].control);
	find_inferior (&all_lwps, update_registers_callback, &data);
	return 0;
      }

  /* No watchpoint matched.  */
  return -1;
}

/* Return whether current thread is stopped due to a watchpoint.  */
static int
arm_stopped_by_watchpoint (void)
{
  struct lwp_info *lwp = get_thread_lwp (current_inferior);
  struct siginfo siginfo;

  /* We must be able to set hardware watchpoints.  */
  if (arm_linux_get_hw_watchpoint_count () == 0)
    return 0;

  /* Retrieve siginfo.  */
  errno = 0;
  ptrace (PTRACE_GETSIGINFO, lwpid_of (lwp), 0, &siginfo);
  if (errno != 0)
    return 0;

  /* This must be a hardware breakpoint.  */
  if (siginfo.si_signo != SIGTRAP
      || (siginfo.si_code & 0xffff) != 0x0004 /* TRAP_HWBKPT */)
    return 0;

  /* If we are in a positive slot then we're looking at a breakpoint and not
     a watchpoint.  */
  if (siginfo.si_errno >= 0)
    return 0;

  /* Cache stopped data address for use by arm_stopped_data_address.  */
  lwp->arch_private->stopped_data_address
    = (CORE_ADDR) (uintptr_t) siginfo.si_addr;

  return 1;
}

/* Return data address that triggered watchpoint.  Called only if
   arm_stopped_by_watchpoint returned true.  */
static CORE_ADDR
arm_stopped_data_address (void)
{
  struct lwp_info *lwp = get_thread_lwp (current_inferior);
  return lwp->arch_private->stopped_data_address;
}

/* Called when a new process is created.  */
static struct arch_process_info *
arm_new_process (void)
{
  struct arch_process_info *info = xcalloc (1, sizeof (*info));
  return info;
}

/* Called when a new thread is detected.  */
static struct arch_lwp_info *
arm_new_thread (void)
{
  struct arch_lwp_info *info = xcalloc (1, sizeof (*info));
  int i;

  for (i = 0; i < MAX_BPTS; i++)
    info->bpts_changed[i] = 1;
  for (i = 0; i < MAX_WPTS; i++)
    info->wpts_changed[i] = 1;

  return info;
}

/* Called when resuming a thread.
   If the debug regs have changed, update the thread's copies.  */
static void
arm_prepare_to_resume (struct lwp_info *lwp)
{
  int pid = lwpid_of (lwp);
  struct process_info *proc = find_process_pid (pid_of (lwp));
  struct arch_process_info *proc_info = proc->private->arch_private;
  struct arch_lwp_info *lwp_info = lwp->arch_private;
  int i;

  for (i = 0; i < arm_linux_get_hw_breakpoint_count (); i++)
    if (lwp_info->bpts_changed[i])
      {
	errno = 0;

	if (arm_hwbp_control_is_enabled (proc_info->bpts[i].control))
	  if (ptrace (PTRACE_SETHBPREGS, pid, ((i << 1) + 1),
	      &proc_info->bpts[i].address) < 0)
	    perror_with_name ("Unexpected error setting breakpoint address");

	if (arm_hwbp_control_is_initialized (proc_info->bpts[i].control))
	  if (ptrace (PTRACE_SETHBPREGS, pid, ((i << 1) + 2),
	      &proc_info->bpts[i].control) < 0)
	    perror_with_name ("Unexpected error setting breakpoint");

	lwp_info->bpts_changed[i] = 0;
      }

  for (i = 0; i < arm_linux_get_hw_watchpoint_count (); i++)
    if (lwp_info->wpts_changed[i])
      {
	errno = 0;

	if (arm_hwbp_control_is_enabled (proc_info->wpts[i].control))
	  if (ptrace (PTRACE_SETHBPREGS, pid, -((i << 1) + 1),
	      &proc_info->wpts[i].address) < 0)
	    perror_with_name ("Unexpected error setting watchpoint address");

	if (arm_hwbp_control_is_initialized (proc_info->wpts[i].control))
	  if (ptrace (PTRACE_SETHBPREGS, pid, -((i << 1) + 2),
	      &proc_info->wpts[i].control) < 0)
	    perror_with_name ("Unexpected error setting watchpoint");

	lwp_info->wpts_changed[i] = 0;
      }
}


static int
arm_get_hwcap (unsigned long *valp)
{
  unsigned char *data = alloca (8);
  int offset = 0;

  while ((*the_target->read_auxv) (offset, data, 8) == 8)
    {
      unsigned int *data_p = (unsigned int *)data;
      if (data_p[0] == AT_HWCAP)
	{
	  *valp = data_p[1];
	  return 1;
	}

      offset += 8;
    }

  *valp = 0;
  return 0;
}

static void
arm_arch_setup (void)
{
  int pid = lwpid_of (get_thread_lwp (current_inferior));

  /* Query hardware watchpoint/breakpoint capabilities.  */
  arm_linux_init_hwbp_cap (pid);

  arm_hwcap = 0;
  if (arm_get_hwcap (&arm_hwcap) == 0)
    {
      init_registers_arm ();
      return;
    }

  if (arm_hwcap & HWCAP_IWMMXT)
    {
      init_registers_arm_with_iwmmxt ();
      return;
    }

  if (arm_hwcap & HWCAP_VFP)
    {
      char *buf;

      /* NEON implies either no VFP, or VFPv3-D32.  We only support
	 it with VFP.  */
      if (arm_hwcap & HWCAP_NEON)
	init_registers_arm_with_neon ();
      else if ((arm_hwcap & (HWCAP_VFPv3 | HWCAP_VFPv3D16)) == HWCAP_VFPv3)
	init_registers_arm_with_vfpv3 ();
      else
	init_registers_arm_with_vfpv2 ();

      /* Now make sure that the kernel supports reading these
	 registers.  Support was added in 2.6.30.  */
      errno = 0;
      buf = xmalloc (32 * 8 + 4);
      if (ptrace (PTRACE_GETVFPREGS, pid, 0, buf) < 0
	  && errno == EIO)
	{
	  arm_hwcap = 0;
	  init_registers_arm ();
	}
      free (buf);

      return;
    }

  /* The default configuration uses legacy FPA registers, probably
     simulated.  */
  init_registers_arm ();
}

struct regset_info target_regsets[] = {
  { PTRACE_GETREGS, PTRACE_SETREGS, 0, 18 * 4,
    GENERAL_REGS,
    arm_fill_gregset, arm_store_gregset },
  { PTRACE_GETWMMXREGS, PTRACE_SETWMMXREGS, 0, 16 * 8 + 6 * 4,
    EXTENDED_REGS,
    arm_fill_wmmxregset, arm_store_wmmxregset },
  { PTRACE_GETVFPREGS, PTRACE_SETVFPREGS, 0, 32 * 8 + 4,
    EXTENDED_REGS,
    arm_fill_vfpregset, arm_store_vfpregset },
  { 0, 0, 0, -1, -1, NULL, NULL }
};

struct linux_target_ops the_low_target = {
  arm_arch_setup,
  arm_num_regs,
  arm_regmap,
  arm_cannot_fetch_register,
  arm_cannot_store_register,
  arm_get_pc,
  arm_set_pc,

  /* Define an ARM-mode breakpoint; we only set breakpoints in the C
     library, which is most likely to be ARM.  If the kernel supports
     clone events, we will never insert a breakpoint, so even a Thumb
     C library will work; so will mixing EABI/non-EABI gdbserver and
     application.  */
#ifndef __ARM_EABI__
  (const unsigned char *) &arm_breakpoint,
#else
  (const unsigned char *) &arm_eabi_breakpoint,
#endif
  arm_breakpoint_len,
  arm_reinsert_addr,
  0,
  arm_breakpoint_at,
  arm_insert_point,
  arm_remove_point,
  arm_stopped_by_watchpoint,
  arm_stopped_data_address,
  NULL, /* collect_ptrace_register */
  NULL, /* supply_ptrace_register */
  NULL, /* siginfo_fixup */
  arm_new_process,
  arm_new_thread,
  arm_prepare_to_resume,
};