| 2021-06-22 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Removed. |
| * aclocal.m4: Removed. |
| * configure: Removed. |
| |
| 2021-06-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| |
| 2021-06-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-06-20 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_COMMON): Delete. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-06-20 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| |
| 2021-06-19 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: Regenerate. |
| * configure: Regenerate. |
| |
| 2021-06-19 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-06-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-06-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-06-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Delete SIM_AC_OPTION_ENDIAN call. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-06-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-06-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| * config.in: Removed. |
| |
| 2021-06-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2021-06-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Delete call to SIM_AC_OPTION_WARNINGS. |
| * configure: Regenerate. |
| |
| 2021-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Delete call to SIM_AC_OPTION_ALIGNMENT. |
| * wrapper.c (sim_open): Set current_alignment. |
| |
| 2021-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, config.in, configure: Regenerate. |
| |
| 2021-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2021-05-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Delete. |
| |
| 2021-05-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (SIM_HAVE_COMMON_SIM_STATE): Define. |
| (struct sim_state): Delete. |
| |
| 2021-05-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * armcopro.c, armemu.c, arminit.c, armsupp.c, armvirt.c, iwmmxt.c, |
| maverick.c, thumbemu.c: Include defs.h. |
| * armos.c, wrapper.c: Replace config.h include with defs.h. |
| * armdefs.h: Delete config.h include. |
| |
| 2021-05-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2021-05-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * armos.c (ARMul_OSHandleSWI): Delete 2nd arg to time callback. |
| |
| 2021-05-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * armos.c: Update include path. |
| * wrapper.c: Likewise. |
| |
| 2021-05-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-05-03 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * armdefs.h (ARMul_ConsolePrint): Use format attribute. |
| * wrapper.c (op_printf): Likewise. |
| |
| 2021-05-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2021-05-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Change armemu26.o to armemu.o. |
| (armemu26.o, armemu32.o): Delete targets. |
| * armemu32.c: New file. |
| |
| 2021-04-26 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, config.in, configure: Regenerate. |
| |
| 2021-04-26 Nick Clifton <nickc@redhat.com> |
| |
| PR 22790 |
| * armemu.c (Handle_Store_Double): Allow 4 byte alignment when |
| running in v6 mode. |
| |
| 2021-04-22 Tom Tromey <tom@tromey.com> |
| |
| * configure, config.in: Rebuild. |
| |
| 2021-04-22 Tom Tromey <tom@tromey.com> |
| |
| * Makefile.in (armemu26.o, armemu32.o): Use COMPILE and |
| POSTCOMPILE. |
| |
| 2021-04-22 Tom Tromey <tom@tromey.com> |
| |
| * configure: Rebuild. |
| |
| 2021-04-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: Regenerate. |
| |
| 2021-04-21 Simon Marchi <simon.marchi@polymtl.ca> |
| |
| * configure: Regenerate. |
| |
| 2021-04-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-04-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * wrapper.c (sim_open): Delete 3rd arg to sim_cpu_alloc_all. |
| |
| 2021-04-02 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-02-28 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-02-21 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (AC_CONFIG_MACRO_DIRS): Replace common with m4. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-02-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Replace sinclude with AC_CONFIG_MACRO_DIRS. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2021-02-06 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-01-11 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2021-01-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-01-08 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2021-01-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * wrapper.c: Include stdlib.h. |
| |
| 2021-01-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * iwmmxt.c: Include stdlib.h. |
| |
| 2021-01-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2020-12-15 Nick Clifton <nickc@redhat.com> |
| |
| * wrapper.c (sim_create_inferior): Accept some more ARM machine numbers. |
| |
| 2020-12-15 Jens Bauer <jens@plustv.dk> |
| |
| * armemu.c (handle_v6_insn): Add support for SDIV and UDIV. |
| * thumbemu.c (handle_T2_insn): Likewise. |
| |
| 2020-10-20 Dr. David Alan Gilbert <dgilbert@redhat.com> |
| |
| * armos.c (SWIread): Fix printf format. |
| |
| 2020-08-13 Luis Machado <luis.machado@linaro.org> |
| |
| PR sim/26365 |
| |
| * wrapper.c (sim_target_parse_command_line): Free discarded argv |
| entries. |
| (sim_open): Use a duplicate of argv instead of the original argv. |
| |
| 2020-01-17 Christian Biesinger <cbiesinger@google.com> |
| |
| * iwmmxt.c: Fix spelling error (seperate). |
| |
| 2019-12-06 Luis Machado <luis.machado@linaro.org> |
| |
| * armemu.c (isize): Move this declaration ... |
| * arminit.c (isize): ... here. |
| * maverick.h: New file. |
| * wrapper.c: Include "maverick.h". |
| (<struct maverick_regs>, <union maverick_acc_regs>): Remove and update |
| comment. |
| (sim_create_inferior): Cast variables to proper type. |
| * maverick.c: Include "maverick.h". |
| (<struct maverick_regs>, <union maverick_acc_regs>): Move |
| declarations to maverick.h and update comment. |
| (DSPsc, DSPacc, DSPregs): Adjust comment. |
| |
| 2018-01-02 Nick Clifton <nickc@redhat.com> |
| |
| PR 22663 |
| * maverick.c (DSPCDP4): Add missing parameter to debug print |
| statement. |
| |
| 2017-09-21 Yao Qi <yao.qi@linaro.org> |
| |
| * wrapper.c (print_insn): Use disassembler instead of |
| print_insn_little_arm. |
| |
| 2017-09-06 John Baldwin <jhb@FreeBSD.org> |
| |
| * configure: Regenerate. |
| |
| 2017-02-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * armos.c: Include libiberty.h. |
| (SWIopen): Use ARRAY_SIZE. |
| * armsupp.c: Include libiberty.h. |
| (ModeToBank): Use ARRAY_SIZE. |
| * wrapper.c (sim_target_parse_command_line): Likewise. |
| |
| 2016-07-14 Nick Clifton <nickc@redhat.com> |
| |
| * armemu.c (Multiply64): Only issue error messages about invalid |
| arguments if debugging is enabled. |
| * armos.c (ARMul_OSHandleSWI): Ignore invalid flags. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_ENVIRONMENT): Delete call. |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_INLINE): Delete call. |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-09 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2016-01-06 Mike Frysinger <vapier@gentoo.org> |
| |
| * wrapper.c (sim_create_inferior): Mark argv and env const. |
| (sim_open): Mark argv const. |
| |
| 2016-01-04 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * wrapper.c (sim_open): Update sim_parse_args comment. |
| |
| 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * wrapper.c (sim_target_parse_arg_array): Replace for loop with |
| a call to countargv. |
| |
| 2016-01-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (SIM_AC_OPTION_HOSTENDIAN): Delete. |
| * configure: Regenerate. |
| |
| 2016-01-02 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| * wrapper.c (init): Change BIG_ENDIAN to BFD_ENDIAN_BIG. |
| |
| 2015-12-30 Mike Frysinger <vapier@gentoo.org> |
| |
| * wrapper.c (sim_store_register): Rename to ... |
| (arm_reg_store): ... this. |
| (sim_fetch_register): Rename to ... |
| (arm_reg_fetch): ... this. |
| (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE. |
| |
| 2015-12-27 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Delete sim-hload.o. |
| |
| 2015-12-26 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2015-12-25 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Delete bag.o. |
| * armdefs.h (struct ARMul_State): Delete ErrorCode. |
| (ResetPin, FIQPin, IRQPin, AbortPin, TransPin, BigEndPin, Prog32Pin, |
| Data32Pin, LateAbortPin, ARMul_OSExit, ARMul_OSLastErrorP, |
| ARMul_Debug, ARMul_OSException,rdi_log, SpinCursor, HOURGLASS, |
| HOURGLASS_RATE): Delete. |
| * armemu.c (ARMul_Emulate26): Delete ARMul_Debug call. |
| * arminit.c (ARMul_Reset): Do not set state->ErrorCode. |
| (ARMul_Abort): Delete ARMul_OSException call. |
| * armopts.h: Delete file. |
| * armos.c (isatty_, ARMul_OSExit, ARMul_OSException, |
| ARMul_OSLastErrorP, ARMul_Debug, BUFFERSIZE, UNIQUETEMPS, NOOP, |
| BINARY, READOP, WRITEOP, FIXCRLF): Delete. |
| (struct OSblock): Delete Time0, ErrorP, FileTable, FileFlags, and |
| tempnames. |
| (ARMul_OSInit): Do not set OSptr->ErrorP, OSptr->FileTable, or |
| OSptr->tempnames. |
| * armrdi.c: Delete file. |
| * armvirt.c: Delete armopts.h include. |
| (ARMul_LoadInstrS): Delete HOURGLASS logic. |
| * bag.c, bag.h, communicate.c, communicate.h, dbg_conf.h, dbg_cp.h, |
| dbg_hif.h: Delete files. |
| * dbg_rdi.h (RDP_*, RDI*): Delete defines. |
| (PointHandle, ThreadHandle, Dbg_ConfigBlock, Dbg_HostosInterface, |
| Dbg_MCState, getbufferproc): Delete. |
| (rdi_*): Delete Functions. |
| (RDI_ConfigAspect, RDI_ConfigMatchType, RDI_NameList): Delete |
| (struct RDIProcVec): Delete. |
| * gdbhost.c, gdbhost.h, kid.c, main.c, parent.c: Delete files. |
| * wrapper.c (ARMul_Debug): Delete. |
| |
| 2015-12-15 Dominik Vogt <vogt@linux.vnet.ibm.com> |
| |
| * thumbemu.c (handle_T2_insn): Fix left shift of negative value. |
| * armemu.c (handle_v6_insn): Likewise. |
| |
| 2015-11-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * wrapper.c (sim_close): Delete. |
| |
| 2015-07-14 Nick Clifton <nickc@redhat.com> |
| |
| * armcopro.c: Remove extraneous whitespace. |
| * armdefs.h: Likewise. |
| * armfpe.h: Likewise. |
| * arminit.c: Likewise. |
| * armopts.h: Likewise. |
| * armos.c: Likewise. |
| * armos.h: Likewise. |
| * armrdi.c: Likewise. |
| * armsupp.c: Likewise. |
| * armvirt.c: Likewise. |
| * bag.c: Likewise. |
| * bag.h: Likewise. |
| * communicate.c: Likewise. |
| * communicate.h: Likewise. |
| * dbg_conf.h: Likewise. |
| * dbg_cp.h: Likewise. |
| * dbg_hif.h: Likewise. |
| * dbg_rdi.h: Likewise. |
| * gdbhost.c: Likewise. |
| * gdbhost.h: Likewise. |
| * iwmmxt.c: Likewise. |
| * iwmmxt.h: Likewise. |
| * kid.c: Likewise. |
| * main.c: Likewise. |
| * maverick.c: Likewise. |
| * parent.c: Likewise. |
| * thumbemu.c: Likewise. |
| * wrapper.c: Likewise. |
| |
| 2015-07-02 Nick Clifton <nickc@redhat.com> |
| |
| * Makefile.in (SIM_EXTRA_CFLAGS): Revert previous delta. |
| (SIM_EXTRA_LIBS): Add -lm. |
| |
| 2015-06-28 Nick Clifton <nickc@redhat.com> |
| |
| * Makefile.in (SIM_EXTRA_CFLAGS): Add -lm. |
| * armdefs.h (ARMdval, ARMfval): New types. |
| (ARM_VFP_reg): New union. |
| (struct ARMul_State): Add VFP_Reg and FPSCR fields. |
| (VFP_fval, VFP_uword, VFP_sword, VFP_dval, VFP_dword): Accessor |
| macros for the new VFP_Reg field. |
| * armemu.c (handle_v6_insn): Add code to handle MOVW, MOVT, |
| QADD16, QASX, QSAX, QSUB16, QADD8, QSUB8, UADD16, USUB16, UADD8, |
| USUB8, SEL, REV, REV16, RBIT, BFC, BFI, SBFX and UBFX |
| instructions. |
| (handle_VFP_move): New function. |
| (ARMul_Emulate16): Add checks for newly supported v6 |
| instructions. Add support for VMRS, VMOV and MRC instructions. |
| (Multiply64): Allow nRdHi == nRm and/or nRdLo == nRm when |
| operating in v6 mode. |
| * armemu.h (t_resolved): Define. |
| * armsupp.c: Include math.h. |
| (handle_VFP_xfer): New function. Handles VMOV, VSTM, VSTR, VPUSH, |
| VSTM, VLDM and VPOP instructions. |
| (ARMul_LDC): Test for co-processor 10 or 11 and pass call to the |
| new handle_VFP_xfer function. |
| (ARMul_STC): Likewise. |
| (handle_VFP_op): New function. Handles VMLA, VMLS, VNMLA, VNMLS, |
| VNMUL, VMUL, VADD, VSUB, VDIV, VMOV, VABS, VNEG, VSQRT, VCMP, |
| VCMPE and VCVT instructions. |
| (ARMul_CDP): Test for co-processor 10 or 11 and pass call to the |
| new handle_VFP_op function. |
| * thumbemu.c (tBIT, tBITS, ntBIT, ntBITS): New macros. |
| (test_cond): New function. Tests a condition and returns non-zero |
| if the condition has been met. |
| (handle_IT_block): New function. |
| (in_IT_block): New function. |
| (IT_block_allow): New function. |
| (ThumbExpandImm): New function. |
| (handle_T2_insn): New function. Handles T2 thumb instructions. |
| (handle_v6_thumb_insn): Add next_instr and pc parameters. |
| (ARMul_ThumbDecode): Add support for IT blocks. Add support for |
| v6 instructions. |
| * wrapper.c (sim_create_inferior): Detect a thumb address and call |
| SETT appropriately. |
| |
| 2015-06-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-06-23 Mike Frysinger <vapier@gentoo.org> |
| |
| * armdefs.h: Always include stdint.h. |
| [!__STDC__]: Delete. |
| [!HAVE_STDINT_H]: Delete. |
| * dbg_hif.h [!__STDC__]: Delete. |
| |
| 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-06-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-04-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (SIM_CPU): Delete. |
| |
| 2015-04-18 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (sim_cia): Delete. |
| |
| 2015-04-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * sim-main.h (CIA_GET, CIA_SET): Delete. |
| |
| 2015-04-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * wrapper.c (arm_pc_get, arm_pc_set): New functions. |
| (sim_open): Declare new local var i. Call CPU_PC_FETCH & |
| CPU_PC_STORE for all cpus. |
| |
| 2015-04-15 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Delete sim-cpu.o. |
| * sim-main.h (STATE_CPU): Delete. |
| |
| 2015-04-13 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure: Regenerate. |
| |
| 2015-04-12 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Move wrapper.o to the start of the list. |
| |
| 2015-04-06 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_OBJS): Delete sim-engine.o. |
| |
| 2015-04-01 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (armos.o, armcopro.o, maverick.o, iwmmxt.o, arminit.o, |
| armrdi.o, armsupp.o, thumbemu.o, bag.o, wrapper.o): Delete rules. |
| * tconfig.h: Delete file. |
| |
| 2015-03-31 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| |
| 2015-03-30 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_RUN_OBJS): Delete. |
| (SIM_EXTRA_CFLAGS): Delete -DSIM_TARGET_SWITCHES and |
| -DSIM_USE_DEPRECATED_RUN_FRONTEND. |
| (SIM_OBJS): Change to $(SIM_NEW_COMMON_OBJS). |
| * sim-main.h: New file. |
| * wrapper.c: Delete armdefs.h, sim-utils.h, and run-sim.h includes. |
| Add sim-main.h and sim-options.h includes. |
| (sim_callback, mem_size, trace): Add TODO comments. |
| (state): Delete static and add TODO comment. |
| (sim_kind, myname, big_endian): Delete. |
| (init): Change big_endian to CURRENT_TARGET_BYTE_ORDER check. |
| (sim_size, sim_trace, sim_info, sim_target_display_usage, sim_load, |
| sim_do_command, sim_set_callbacks, sim_complete_command): Delete. |
| (sim_target_parse_command_line): Mark static. |
| (free_state): New function. |
| (sim_open): Rewrite to use new common logic. |
| (sim_close): Delete body. |
| |
| 2015-03-30 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_EXTRA_CFLAGS): Delete -DNEED_UI_LOOP_HOOK. |
| * interp.c [NEED_UI_LOOP_HOOK] (UI_LOOP_POLL_INTERVAL, |
| ui_loop_hook_counter, deprecated_ui_loop_hook): Delete. |
| (sim_resume) [NEED_UI_LOOP_HOOK]: Delete ui code. |
| |
| 2015-03-30 Mike Frysinger <vapier@gentoo.org> |
| |
| * armemu.c [MODE32] (handle_v6_insn): Move definition. |
| (ARMul_Emulate26): Initialize do_int after label target. |
| * armemu.h (UNDEF_Test, UNDEF_Shift, UNDEF_MSRPC, UNDEF_MRSPC, |
| UNDEF_MULPCDest, UNDEF_MULDestEQOp1, UNDEF_LSRBPC, |
| UNDEF_LSRBaseEQOffWb, UNDEF_LSRBaseEQDestWb, UNDEF_LSRPCBaseWb, |
| UNDEF_LSRPCOffWb, UNDEF_LSMNoRegs, UNDEF_LSMPCBase, |
| UNDEF_LSMUserBankWb, UNDEF_LSMBaseInListWb, UNDEF_SWPPC, |
| UNDEF_CoProHS, UNDEF_MCRPC, UNDEF_LSCPCBaseWb, |
| UNDEF_UndefNotBounced, UNDEF_ShortInt, UNDEF_IllegalMode, |
| UNDEF_Prog32SigChange, UNDEF_Data32SigChange): Define to while(0). |
| * armsupp.c (ARMul_Align): Convert old style prototype. |
| * bag.c (addtolist, killwholelist): Mark static. |
| (BAG_newbag): Convert old style prototype. |
| * maverick.c (mv_compute_host_endianness): Delete. |
| * wrapper.c (verbosity, sim_set_verbose): Delete. |
| (init): Set state->verbose to 0. |
| |
| 2015-03-30 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Call SIM_AC_OPTION_ENDIAN, SIM_AC_OPTION_ALIGNMENT, |
| SIM_AC_OPTION_HOSTENDIAN, SIM_AC_OPTION_ENVIRONMENT, |
| SIM_AC_OPTION_INLINE, and SIM_AC_OPTION_WARNINGS. |
| * config.in, configure: Regenerate. |
| |
| 2015-03-30 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (COPRO): Delete. |
| (SIM_OBJS): Expand COPRO. |
| * configure.ac: Deletd stdint.h check. |
| (COPRO): Delete. |
| * configure: Regenerate. |
| |
| 2015-03-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * config.in, configure: Regenerate. |
| * tconfig.in: Rename file ... |
| * tconfig.h: ... here. |
| |
| 2015-03-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * Makefile.in (SIM_EXTRA_CFLAGS): Add |
| -DSIM_USE_DEPRECATED_RUN_FRONTEND. |
| (SIM_RUN_OBJS): Set to run.o. |
| |
| 2015-03-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac (AC_CHECK_HEADERS): Delete unistd.h. |
| * aclocal.m4, configure: Regenerate. |
| |
| 2014-08-19 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2014-08-15 Roland McGrath <mcgrathr@google.com> |
| |
| * configure: Regenerate. |
| * config.in: Regenerate. |
| |
| 2014-03-18 Nick Clifton <nickc@redhat.com> |
| |
| * wrapper.c: Convert function declarations to ISO C format. |
| (sim_open): Delete code for handling t,d and z command line |
| options. |
| |
| 2014-03-14 Nick Clifton <nickc@redhat.com> |
| |
| * wrapper.c (op_print): New function. |
| (sim_dis_read): New function. |
| (print_insn): New function - disassembles the given instruction. |
| (sim_trace): Note that tracing is now allowed. |
| (sim_create_inferior): Default to emulating v6. |
| Initialise the disassembler machinery. |
| (sim_target_parse_command_line): Add support for -t -d and -z |
| options. |
| (sim_target_display_usage): Note existence of -d and -z options. |
| (sim_open): Parse -t -d and -z options. |
| * armemu.h: Add exports of trace, disas and trace_funcs. |
| Add prototype for print_insn. |
| * armemu.c (ARMul_Emulate26): Add tracing code. |
| Delete unused variables. |
| * thumbemu (handle_v6_thumb_insn): Delete unused variable Rd. |
| Move Rm variable into switch cases. |
| Add tracing code. |
| |
| * armcopro.c (XScale_cp15_init): Add a return value. |
| (XScale_cp13_init): Likewise. |
| (XScale_cp14_init): Likewise. |
| (XScale_cp15_LDC): Delete unused function. |
| (XScale_cp15_STC): Likewise. |
| * maverick.c: Delete comment inside comment. |
| (DSPInit): Delete unused function. |
| (DSPMCR4): Fix compile time warning about missing parenthesis. |
| (DSPMCR5): Likewise. |
| (DSPCDP6): Delete unused variable opcode2. |
| |
| 2014-03-14 David McQuillan <dmcq@tao-group.com> |
| |
| PR sim/8388 |
| * armemu.c (WriteR15Load): New function. Determines if the state |
| can be changed upon a write to R15. |
| (LoadMult): Use WriteR15Load. |
| * armemu.h (WRITEDESTB): Use WriteR15Load. |
| |
| 2014-03-10 Mike Frysinger <vapier@gentoo.org> |
| |
| * wrapper.c (sim_do_command): Add const to cmd. |
| |
| 2014-03-05 Mike Frysinger <vapier@gentoo.org> |
| |
| * wrapper.c (sim_load): Add const to prog. |
| |
| 2013-09-23 Alan Modra <amodra@gmail.com> |
| |
| * configure: Regenerate. |
| |
| 2013-06-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, configure: Regenerate. |
| |
| 2013-05-07 Jayant Sonar <jayant.sonar@kpitcummins.com> |
| Kaushik Phatak <Kaushik.Phatak@kpitcummins.com> |
| |
| * armemu.c (ARMul_Emulate32): Emulate instructions MOVW and MOVT. |
| |
| 2012-12-19 Joel Brobecker <brobecker@adacore.com> |
| |
| * COPYING: Update to GPL version 3. |
| |
| 2012-09-03 Nick Clifton <nickc@redhat.com> |
| |
| PR sim/14540 |
| * armsupp.c (ARMul_MRC): Return 0 if access to the MRC instruction |
| is denied. |
| |
| 2012-08-01 Kevin Buettner <kevinb@redhat.com> |
| |
| * wrapper.c (libiberty.h): Include. |
| (sim_store_register, sim_fetch_register): On success, return |
| length, instead of -1. |
| |
| 2012-06-15 Joel Brobecker <brobecker@adacore.com> |
| |
| * config.in, configure: Regenerate. |
| |
| 2012-06-13 Nick Clifton <nickc@redhat.com> |
| |
| * wrapper.c (sim_create_inferior): Treat WMMX2 binaries as iWMMXt |
| binaries (for now). |
| |
| 2012-05-24 Pedro Alves <palves@redhat.com> |
| |
| PR gdb/7205 |
| |
| Replace TARGET_SIGNAL_ with GDB_SIGNAL_ throughout. |
| |
| 2012-05-18 Nick Clifton <nickc@redhat.com> |
| |
| PR 14072 |
| * wrapper.c: Include config.h before system header files. |
| |
| 2012-03-24 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4, config.in, configure: Regenerate. |
| |
| 2011-12-03 Mike Frysinger <vapier@gentoo.org> |
| |
| * aclocal.m4: New file. |
| * configure: Regenerate. |
| |
| 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Change include to common/acinclude.m4. |
| |
| 2011-10-17 Mike Frysinger <vapier@gentoo.org> |
| |
| * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER |
| call. Replace common.m4 include with SIM_AC_COMMON. |
| * configure: Regenerate. |
| |
| 2011-07-01 Nick Clifton <nickc@redhat.com> |
| |
| PR sim/12737 |
| * iwmmxt.c (WCMPGT): Sign extend 32-bit values before performing a |
| signed compare. |
| (WMAC): Extend computed result before adding to result register. |
| (WRSA): Sign extend 32-bit values before shifting. |
| |
| 2011-04-16 Mike Frysinger <vapier@gentoo.org> |
| |
| * wrapper.c (sim_complete_command): New stub function. |
| |
| 2010-05-26 Ozkan Sezer <sezeroz@gmail.com> |
| |
| * communicate.c (MYread_char): Check error return from accept() call |
| by its equality to -1 not by it being negative. |
| (MYread_charwait): Likewise. |
| * main.c (main): Likewise for both socket() and accept() calls. |
| |
| 2010-04-14 Mike Frysinger <vapier@gentoo.org> |
| |
| * wrapper.c (sim_write): Add const to buffer arg. |
| |
| 2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * configure: Regenerate. |
| |
| 2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de> |
| |
| * config.in: Regenerate. |
| * configure: Likewise. |
| |
| * configure: Regenerate. |
| |
| 2008-11-24 Joel Sherrill <joel.sherrill@oarcorp.com> |
| |
| * arminit.c, iwmmxt.c: Include <string.h> to |
| eliminate warning. |
| 2008-07-11 Hans-Peter Nilsson <hp@axis.com> |
| |
| * configure: Regenerate to track ../common/common.m4 changes. |
| * config.in: Ditto. |
| |
| 2008-06-06 Vladimir Prus <vladimir@codesourcery.com> |
| Daniel Jacobowitz <dan@codesourcery.com> |
| Joseph Myers <joseph@codesourcery.com> |
| |
| * configure: Regenerate. |
| * wrapper.c (sim_target_display_usage): Add help parameter. |
| |
| 2007-02-27 Mark Mitchell <mark@codesourcery.com> |
| |
| * armos.c (SWIflen): Do not treate file descriptor zero as |
| special. |
| |
| 2007-02-15 Nick Clifton <nickc@redhat.com> |
| |
| * armemu.c (handle_v6_insn): Fix typo in sign extension test of |
| the sext and sxtah instructions. |
| |
| 2007-02-08 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| Reported by timeless@gmail.com: |
| * wrapper.c (sim_target_parse_arg_array): Do not return void value. |
| |
| 2006-12-21 Hans-Peter Nilsson <hp@axis.com> |
| |
| * acconfig.h: Remove. |
| * config.in: Regenerate. |
| |
| 2006-06-13 Richard Earnshaw <rearnsha@arm.com> |
| |
| * configure: Regenerated. |
| |
| 2006-06-05 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * configure: Regenerated. |
| |
| 2006-05-31 Daniel Jacobowitz <dan@codesourcery.com> |
| |
| * configure: Regenerated. |
| |
| 2006-03-07 Paul Brook <paul@codesourcery.com> |
| |
| * elfos.c (ARMul_OSHandleSWI): Call correct function for IsTTY. |
| |
| 2006-02-01 Shaun Jackman <sjackman@gmail.com> |
| |
| * armos.c (ARMul_OSHandleSWI): Handle the RedBoot system |
| call meminfo. Return ENOSYS for unhandled RedBoot syscalls. |
| |
| 2005-11-23 Mark Mitchell <mark@codesourcery.com> |
| |
| * wrapper.c (gdb/signals.h): Include it. |
| (SIGTRAP): Don't define. |
| (SIGBUS): Likewise. |
| (sim_stop_reason): Use TARGET_SIGNAL_* instead of SIG*. |
| |
| 2005-11-16 Shaun Jackman <sjackman@gmail.com> |
| |
| * armos.c: Include limits.h |
| (unlink): Remove this macro. It is unused in this file and |
| conflicts with sim_callback->unlink. |
| (PATH_MAX): Define as 1024 if not already defined. |
| (ReadFileName): New function. |
| (SWIopen): Fix a potential buffer overflow. |
| (SWIremove): New function. |
| (SWIrename): Ditto. |
| (ARMul_OSHandleSWI): Handle the RDP calls SWI_IsTTY, |
| SWI_Remove, and SWI_Rename, as well as the RDI calls |
| AngelSWI_Reason_IsTTY, AngelSWI_Reason_Remove, and |
| AngelSWI_Reason_Rename. |
| |
| 2005-09-19 Paul Brook <paul@codesourcery.com> |
| |
| * armdefs.h: Define ARMsword and ARMsdword. Use stdint.h when |
| available. |
| * armemu.c: Use them. |
| * armvirt.c (ARMul_MemoryInit): Use correct type for size. |
| * configure.ac: Check for stdint.h. |
| * config.in: Regenerate. |
| * configure: Regenerate. |
| |
| 2005-05-24 Nick Clifton <nickc@redhat.com> |
| |
| * thumbemu.c (handle_v6_thumb_insn): New function. |
| (ARMul_ThumbDecode): Call handle_v6_thumb_insn() when an undefined |
| instruction binary is encountered. |
| |
| 2005-05-12 Nick Clifton <nickc@redhat.com> |
| |
| * Update the address and phone number of the FSF organization in |
| the GPL notices in the following files: |
| COPYING, Makefile.in, armcopro.c, armdefs.h, armemu.c, |
| armemu.h, armfpe.h, arminit.c, armopts.h, armos.c, armos.h, |
| armrdi.c, armsupp.c, armvirt.c, bag.c, bag.h, communicate.c, |
| communicate.h, dbg_conf.h, dbg_cp.h, dbg_hif.h, dbg_rdi.h, |
| gdbhost.c, gdbhost.h, iwmmxt.c, iwmmxt.h, kid.c, main.c, |
| maverick.c, parent.c, thumbemu.c, wrapper.c |
| |
| 2005-04-20 Nick Clifton <nickc@redhat.com> |
| |
| * armemu.c (handle_v6_insn): New function - emulate a few of the |
| v6 instructions - the ones now generated by GCC. |
| (ARMulEmulate32): Call handle_v6_insn when a possible v6 insn is |
| found. |
| * armdefs.h (struct ARMul_State): Add new field: is_v6. |
| (ARM_v6_Prop): Define. |
| * arminit.c (ARMul_NewState): Initialise the v6 flag. |
| (ARMul_SelectProcessor): Determine if the v6 flag should be |
| set. |
| * wrapper.c (sim_create_inferior): For unknown architectures, |
| default to allowing the v6 instructions. |
| |
| 2005-04-18 Nick Clifton <nickc@redhat.com> |
| |
| * iwmmxt.c (WMAC, WMADD): Move casts from the LHS of an assignment |
| operator to the RHS. |
| (WSLL, WSRA, WSRL, WUNPCKEH, WUNPACKEL): Use ULL suffix to |
| indicate an unsigned long long constant. |
| |
| 2005-03-23 Mark Kettenis <kettenis@gnu.org> |
| |
| * configure: Regenerate. |
| |
| 2005-01-14 Andrew Cagney <cagney@gnu.org> |
| |
| * configure.ac: Sinclude aclocal.m4 before common.m4. Add |
| explicit call to AC_CONFIG_HEADER. |
| * configure: Regenerate. |
| |
| 2005-01-12 Andrew Cagney <cagney@gnu.org> |
| |
| * configure.ac: Update to use ../common/common.m4. |
| * configure: Re-generate. |
| |
| 2005-01-11 Andrew Cagney <cagney@localhost.localdomain> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| 2005-01-07 Andrew Cagney <cagney@gnu.org> |
| |
| * configure.ac: Rename configure.in, require autoconf 2.59. |
| * configure: Re-generate. |
| |
| 2004-12-08 Hans-Peter Nilsson <hp@axis.com> |
| |
| * configure: Regenerate for ../common/aclocal.m4 update. |
| |
| 2004-06-28 Andrew Cagney <cagney@gnu.org> |
| |
| * armemu.c: Rename ui_loop_hook to deprecated_ui_loop_hook. |
| |
| 2003-12-29 Mark Mitchell <mark@codesourcery.com> |
| |
| * armos.c (fcntl.h): Do not include it. |
| (O_RDONLY): Do not define. |
| (O_WRONLY): Likewise. |
| (O_RDWR): Likewise. |
| (targ-vals.h): Include it. |
| (translate_open_mode): Use TARGET_O_* instead of O_*. |
| (SWIopen): Likewise. |
| * Makefile.in (armos.o): Depend on targ-vals.h. |
| |
| 2003-04-13 Nick Clifton <nickc@redhat.com> |
| |
| * armvirt.c (GetWord): Only call XScale_check_memacc if in XScale |
| mode. |
| (PutWord): Likewise. |
| |
| 2003-03-30 Nick Clifton <nickc@redhat.com> |
| |
| * configure.in (CON_FLAGS): Remove. |
| (COPRO): Unconditionally include iwmmxt.o. |
| * configure: Regenerate. |
| * Makefile.in (CON_FLAGS): Remove. |
| * armcopro.c: Remove use of __IWMMXT__ flag. |
| * wrapper.c: Likewise. |
| * armemu.c: Likewise. |
| Add explanatory comment for suppressed code. |
| |
| 2003-03-27 Nick Clifton <nickc@redhat.com> |
| |
| * armos.c (ARMul_OsHandleSWI): Catch SWIs for unhandled vectors. |
| |
| 2003-03-27 Nick Clifton <nickc@redhat.com> |
| |
| * configure.in: (CON_FLAGS): Define and intialise. |
| (COPRO): Add iwmmxt.o if configuring for XScale. |
| * configure: Regenerate. |
| * Makefile.in (iwmmxt.o): Add rule to build. |
| (COM_FLAGS): Define. |
| (ALL_FLAGS): Add CON_FLAGS. |
| * armcopro.c (ARMul_CoProInit): Initialise iWMMXt coprocessors. |
| * armdefs.h (struct ARMul_State): Add 'is_iWMMXt' field. |
| (ARM_iWMMXt_Prop): Define. |
| * armemu.c (ARMul_Emulate16): Intercept iWMMXt instructions and |
| pass to coprocessor. |
| * arminit.c (ARMul_NewState): Initialise 'is_iWMMXt'. |
| (ARMul_Abort): Catch branches through uninitialised vectors. |
| * armos.c (softevtorcode): Update comment. |
| (ARMul_OsInit): Use ARMUndefinedInstrV. |
| * wrapper.c (sim_create_inferior): Handle iWMMXt processor type. |
| (sim_store_register): Handle iWMMXt registers. |
| (sim_fetch_register): Handle iWMMXt registers. |
| * iwmmxt.h: New file. Exported iWMMXt coprocessor emulator |
| functions. |
| * iwmmxt.c: New file: iWMMXt emulator. |
| |
| 2003-03-20 Nick Clifton <nickc@redhat.com> |
| |
| * Contribute support for Cirrus Maverick ARM co-processor, |
| written by Aldy Hernandez <aldyh@redhat.com> and |
| Andrew Cagney <cagney@redhat.com>: |
| |
| * maverick.c: New file: Support for Maverick floating point |
| co-processor. |
| * Makefile.in: Add maverick.o target. |
| * configure.in (COPRO): Add maverick.o. |
| * configure: Regenerate. |
| * armcopro.c (ARMul_CoProInit): Only initialise co-processors |
| available on target processor. Add code to initialse Maverick |
| co-processor support code. |
| * armdefs.h (ARMul_state): Add is_ep9312 field. |
| (ARM_ep9312_Prop): Define. |
| * armemu.h: Add prototypes for Maverick co-processor |
| functions. |
| * arminit.c (ARMul_SelectProcessor): Initialise the |
| co-processor support once the chip has been selected. |
| * wrapper.c: Add support for Maverick co-processor. |
| (init): Do not call ARMul_CoProInit. Delays this until the |
| chip has been selected. |
| |
| 2003-03-02 Nick Clifton <nickc@redhat.com> |
| |
| * armos.c (SWIWrite0): Catch big-endian bug when printing |
| characters. |
| |
| 2003-02-27 Andrew Cagney <cagney@redhat.com> |
| |
| * wrapper.c (sim_create_inferior, sim_open): Rename _bfd to bfd. |
| |
| 2003-01-10 Ben Elliston <bje@redhat.com> |
| |
| * README.Cygnus: Rename from this .. |
| * README: .. to this. |
| |
| 2002-09-27 Andrew Cagney <ac131313@redhat.com> |
| |
| * wrapper.c (sim_open): Add support for -m<mem-size>. |
| (mem_size): Reduce to 2MB. |
| Fix PR gdb/433. |
| |
| 2002-08-15 Nick Clifton <nickc@redhat.com> |
| |
| * armos.c (ARMul_OSHandleSWI): Catch and ignore SWIs of -1, they |
| can be caused by an interrupted system call being resumed by GDB. |
| |
| 2002-07-05 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * armemu.c (ARMul_Emulate32): Add more tests for valid MIA, MIAPH |
| and MIAxy instructions. |
| |
| 2002-06-21 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * armos.h (ADP_Stopped_RunTimeError): Set correct value. |
| |
| 2002-06-16 Andrew Cagney <ac131313@redhat.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| 2002-06-12 Andrew Cagney <ac131313@redhat.com> |
| |
| * Makefile.in: Update copyright. |
| (wrapper.o): Specify dependencies. |
| * wrapper.c: Include "gdb/sim-arm.h". |
| (sim_store_register, sim_fetch_register): Rewrite using `enum |
| arm_sim_regs' and a switch. |
| |
| 2002-06-09 Andrew Cagney <cagney@redhat.com> |
| |
| * wrapper.c: Include "gdb/callback.h" and "gdb/remote-sim.h". |
| * armos.c: Include "gdb/callback.h". |
| |
| 2002-05-29 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * armcopro.c (XScale_check_memacc): Set the FSR and FAR registers |
| if a Data Abort is detected. |
| |
| 2002-05-27 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * armvirt.c (GetWord): Only perform access checks if 'check' |
| is set. |
| (PutWord): Likewise. |
| * wrapper.c (sim_create_inferior): Report unknown machine |
| numbers. |
| * thumbemu.c (ARMul_ThumbDecode, Case 31): Do not set LR to pc + |
| 2, it has already been advanced. |
| |
| 2002-05-23 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * thumbemu.c (ARMul_ThumbDecode): When decoding a BLX(1) |
| instruction do not add in the second bit of the base address - |
| this has already been accounted for. |
| |
| 2002-05-21 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * armcopro.c (check_cp13_access): Allow access to register 1 when |
| CRm is 1. |
| (write_cp13_reg): Allow bit 0 of reg 1 of CRm 1 to be written to. |
| |
| 2002-05-17 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * Makefile.in (SIM_TARGET_SWITCHES): Define. |
| * armos.c (swi_mask): Define. Initialise to supporting all |
| SWI emulations. |
| (ARMul_OSInit): For XScale targets, only support the ANGEL |
| SWI interface. (This is at the request if Intel). |
| (ARMul_OSHandleSWI): Examine swi_mask to see if a particular |
| SWI call should be emulated. |
| Do not fall through from AngelSWI_Reason_WriteC. |
| Propagate exit code from RedBoot Exit SWI. |
| * rdi-dgb.h (swi_mask): Prototype. |
| (SWI_MASK_DEMON, SWI_MASK_ANGEL, SWI_MASK_REDBOOT): Define. |
| * wrapper.c (sim_target_parse_command_line): New function. |
| Look for and handle --swi-support switch. |
| (sim_target_parse_arg_array): New function. Process an argv |
| array for parsing by sim_target_parse_command_line. |
| (sim_target_display_usage): New function. Describe syntax of |
| --swi-suppoort switch. |
| (sim_open): Add call to sim_target_parse_arg_array). |
| |
| 2002-05-09 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * armos.c (ARMul_OSHandleSWI): Support the RedBoot SWI in ARM |
| mode and some of its system calls. |
| |
| 2002-03-17 Anthony Green <green@redhat.com> |
| |
| * wrapper.c (mem_size): Increase the default target memory to 8MB. |
| |
| 2002-02-21 Keith Seitz <keiths@redhat.com> |
| |
| * armos.c (SWIWrite0): Use generic host_callback mechanism |
| for supported OS functions "open", "close", "write", etc. |
| (SWIopen): Likewise. |
| (SWIread): Likewise. |
| (SWIwrite): Likewise. |
| (SWIflen): Likewise. |
| (ARMul_OSHandleSWI): Likewise. |
| |
| 2002-02-05 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * wrapper.c (sim_create_inferior): Modify previous patch so that |
| it is only triggered for COFF format executables. |
| |
| 2002-02-04 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * wrapper.c (sin_create_inferior): If a v5 architecture is |
| detected, assume it might be an XScale binary, since there is no |
| way to distinguish between the two in the COFF file format. |
| |
| 2002-01-10 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * arminit.c (ARMul_Abort): Fix parameters passed to CPRead[13]. |
| * armemu.c (ARMul_Emulate32): Fix parameters passed to CPRead[13] |
| and CPRead[14]. |
| Fix formatting. Improve layout. |
| * armemu.h: Fix formatting. Improve layout. |
| |
| 2002-01-09 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * wrapper.c (sim_fetch_register): If fetching more than 4 bytes |
| return zeroes in the other words. |
| General formatting tidy ups. |
| |
| 2001-11-16 Ben Harris <bjh21@netbsd.org> |
| |
| * Makefile.in (armemu32.o): Replace $< with autoconf recommended |
| $(srcdir)/.... |
| (armemu26.o): Ditto. |
| |
| 2001-10-18 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * armemu.h (CP_ACCESS_ALLOWED): New macro. |
| Fix formatting. |
| * armcopro.c (read_cp14_reg): Make static. |
| (write_cp14_reg): Make static. |
| (check_cp13_access): Use CP_ACCESS_ALLOWED macro. |
| Fix formatting. |
| * armsupp.c (ARMul_LDC): Check CP_ACCESS_ALLOWED. |
| (ARMul_STC): Check CP_ACCESS_ALLOWED. |
| (ARMul_MCR): Check CP_ACCESS_ALLOWED. |
| (ARMul_MRC): Check CP_ACCESS_ALLOWED. |
| (ARMul_CDP): Check CP_ACCESS_ALLOWED. |
| Fix formatting. |
| * armemu.c (MCRR): Check CP_ACCESS_ALLOWED. Test Rd and Rn not |
| equal to 15. |
| (MRRC): Check CP_ACCESS_ALLOWED. Test Rd and Rn not equal to 15. |
| Fix formatting. |
| |
| 2001-05-11 Nick Clifton <nickc@cambridge.redhat.com> |
| |
| * armemu.c (ARMul_Emulate32): Fix handling of XScale LDRD and STRD |
| instructions with post indexed addressing modes. |
| |
| 2001-05-08 Jens-Christian Lache <lache@tu-harburg.de> |
| |
| * armsupp.c (ARMul_FixCPSR): Check Mode not Bank in order to |
| determine rocesor mode. |
| |
| 2001-04-18 matthew green <mrg@redhat.com> |
| |
| * armcopro.c (write_cp15_reg): Set CHANGEMODE if endianness changes. |
| (read_cp15_reg): Make non-static. |
| (XScale_cp15_LDC): Update for write_cp15_reg() change. |
| (XScale_cp15_MCR): Likewise. |
| (XScale_cp15_write_reg): Likewise. |
| (XScale_check_memacc): New function. Check for breakpoints being |
| activated by memory accesses. Does not support the Branch Target |
| Buffer. |
| (XScale_set_fsr_far): New function. Set FSR and FAR for XScale. |
| (XScale_debug_moe): New function. Set the debug Method Of Entry, |
| if configured. |
| (write_cp14_reg): Reset count counter if requested. |
| * armdefs.h (struct ARMul_State): New members `LastTime' and |
| `CP14R0_CCD' used for the timer/counters. |
| (ARMul_CP13_R0_FIQ, ARMul_CP13_R0_IRQ, ARMul_CP13_R8_PMUS, |
| ARMul_CP14_R0_ENABLE, ARMul_CP14_R0_CLKRST, ARMul_CP14_R0_CCD, |
| ARMul_CP14_R0_INTEN0, ARMul_CP14_R0_INTEN1, ARMul_CP14_R0_INTEN2, |
| ARMul_CP14_R0_FLAG0, ARMul_CP14_R0_FLAG1, ARMul_CP14_R0_FLAG2, |
| ARMul_CP14_R10_MOE_IB, ARMul_CP14_R10_MOE_DB, ARMul_CP14_R10_MOE_BT, |
| ARMul_CP15_R1_ENDIAN, ARMul_CP15_R1_ALIGN, ARMul_CP15_R5_X, |
| ARMul_CP15_R5_ST_ALIGN, ARMul_CP15_R5_IMPRE, ARMul_CP15_R5_MMU_EXCPT, |
| ARMul_CP15_DBCON_M, ARMul_CP15_DBCON_E1, ARMul_CP15_DBCON_E0): New |
| defines for XScale registers. |
| (XScale_check_memacc, XScale_set_fsr_far, XScale_debug_moe): Prototype. |
| (ARMul_Emulate32, ARMul_Emulate26): Clean up function definition. |
| (ARMul_Emulate32): Handle the clock counter and hardware instruction |
| breakpoints. Call XScale_set_fsr_far() for software breakpoints and |
| software interrupts. |
| (LoadMult): Call XScale_set_fsr_far() for data aborts. |
| (LoadSMult): Likewise. |
| (StoreMult): Likewise. |
| (StoreSMult): Likewise. |
| * armemu.h (write_cp15_reg): Update prototype. |
| * arminit.c (ARMul_NewState): Initialise CP14R0_CCD and LastTime. |
| (ARMul_Abort): If XScale, check for FIQ and IRQ being enabled in CP13 |
| register 0. |
| * armvirt.c (GetWord): Call XScale_check_memacc(). |
| (PutWord): Likewise. |
| |
| 2001-03-20 Nick Clifton <nickc@redhat.com> |
| |
| * armvirt.c (ARMul_ReLoadInstr): Do not enable alignment checking |
| when loading unaligned thumb instructions. |
| |
| 2001-03-06 Nick Clifton <nickc@redhat.com> |
| |
| * thumbemu.c (ARMul_ThumbDecode): Delete label bo_blx2. |
| Compute destination address of BLX(1) instruction by |
| taking bit 1 from PC and not from bit 0 of the offset. |
| |
| 2001-02-27 Nick Clifton <nickc@redhat.com> |
| |
| * armvirt.c (GetWord): Add new parameter - check - to enable or |
| disable the alignment checking. |
| (PutWord): Add new parameter - check - to enable or disable the |
| alignment checking. |
| (ARMul_ReLoadInstr): Pass extra parameter to GetWord. |
| (ARMul_ReadWord): Pass extra parameter to GetWord. |
| (ARMul_WriteWord): Pass extra parameter to PutWord. |
| (ARMul_StoreHalfWord): Pass extra parameter to PutWord. |
| (ARMul_WriteByte): Pass extra parameter to GetWord. |
| (ARMul_SwapWord): Pass extra parameter to PutWord. |
| (ARMul_SafeReadByte): New Function: Read a byte but do not abort. |
| (ARMul_SafeWriteByte): New Function: Write a byte but do not abort. |
| |
| * armdefs.h: Add prototypes for ARMul_SafeReadByte and |
| ARMul_SafeWriteByte. |
| |
| * wrapper.c (sim_write): Use ARMul_SafeWriteByte. |
| (sim_read): Use ARMul_SafeReadByte. |
| |
| * armos.c (in_SWI_handler): Remove. |
| (SWIWrite0): Use ARMul_SafeReadByte. |
| (WriteCommandLineTo): Use ARMul_SafeWriteByte. |
| (SWIopen): Use ARMul_SafeReadByte. |
| (SWIread): Use ARMul_SafeWriteByte. |
| (SWIwrite): Use ARMul_SafeReadByte. |
| (ARMul_OSHandleSWI): Remove use of is_SWI_handler. |
| (ARMul_OSException): Remove use of is_SWI_handler. |
| |
| 2001-02-16 Nick Clifton <nickc@redhat.com> |
| |
| * armemu.c: Remove Prefetch abort for breakpoints. Instead set |
| the state to RESUME. |
| |
| 2001-02-14 Nick Clifton <nickc@redhat.com> |
| |
| * armemu.c: Add code to preserve processor mode when a prefetch |
| abort is signalled after processing a breakpoint. |
| |
| * wrapper.c (sim_create_inferior): Reset processor into ARM mode |
| for any machine type except the early ARMs. |
| |
| 2001-02-13 Nick Clifton <nickc@redhat.com> |
| |
| * armos.c (in_SWI_handler): New static variable. |
| (ARMul_OSHandleSWI): Set in_SWI_handler whilst emulating a SWI. |
| (ARMul_OSException): Ignore exceptions generated whilst emulating |
| a SWI. |
| |
| 2001-02-12 Nick Clifton <nickc@redhat.com> |
| |
| * armemu.h (NEGBRANCH): Fix defintion. |
| |
| 2001-02-01 Nick Clifton <nickc@redhat.com> |
| |
| * armemu.c (LoadSMult): Update base address register after |
| restoring register bank. |
| (StoreMult): Update base address register after restoring register |
| bank. |
| |
| 2001-01-31 Nick Clifton <nickc@redhat.com> |
| |
| * armvirt.c (PutWord): Detect installation of SWI vector. |
| (SWI_vector_installed): Define. |
| * armos.c (ARMul_OsInit): Reset SWI_vector_installed. |
| * armos.h (SWI_vector_installed): Declare. |
| * wrapper.c (SWI_vector_installed): Remove definition. |
| (sim_write): Remove check of SWI vector installation |
| |
| 2000-12-18 Nick Clifton <nickc@redhat.com> |
| |
| * armemu.c (ARMul_Emulate26): Fix test for StoreDouble |
| instruction. |
| |
| 2000-12-10 Nick Clifton <nickc@redhat.com> |
| |
| * armos.c (ARMul_OSHandleSWI): Add 0x91 as an FPE SWI. |
| |
| 2000-12-07 Nick Clifton <nickc@redhat.com> |
| |
| * armemu.c (ARMul_Emulate26): Detect double word load and |
| store instructions and call emulation routines. |
| (Handle_Load_Double): Emulate a double word load instruction. |
| (Handle_Store_Double): Emulate a double word store |
| instruction. |
| |
| 2000-12-03 Nick Clifton <nickc@redhat.com> |
| |
| * armos.c: Fix formatting. |
| (ARMul_OSHandleSWI): Suppress support of DEMON SWIs when in xscale |
| mode. |
| |
| 2000-11-29 Nick Clifton <nickc@redhat.com> |
| |
| * armdefs.h (State): Add 'v5e' and 'xscale' fields. |
| (ARM_v5e_Prop): Define. |
| (ARM_XScale_Prop): Define. |
| |
| * wrapper.c (sim_create_inferior): Select processor based on |
| machine number. |
| (SWI_vector_installed): New boolean. Set to true if the SWI |
| vector address is written to by the executable. |
| |
| * arminit.c (ARMul_NewState): Switch default to 32 bit mode. |
| (ARMul_SelectProcessor): Initialise v5e and xscale signals. |
| (ARMul_Abort): Fix calculation of LR address. |
| |
| * armos.c (ARMul_OSHandleSWI): If a SWI vector has been installed |
| and a SWI is not handled by the simulator, pass the SWI off to the |
| vector, otherwise issue a warning message and continue. |
| |
| * armsupp.c (ARMul_CPSRAltered): Set S bit aswell. |
| |
| * thumbemu.c: Add v5 instruction simulation. |
| * armemu.c: Add v5, XScale and El Segundo instruction simulation. |
| |
| * armcopro.c: Add XScale co-processor emulation. |
| * armemu.h: Add exported XScale co-processor functions. |
| |
| 2000-09-15 Nick Clifton <nickc@redhat.com> |
| |
| * armdefs.h: Rename StrongARM property to v4_ARM and add v5 ARM |
| property. Delete unnecessary processor names. |
| (ARM_Strong_Prop): Delete. |
| (STRONGARM): Delete. |
| (ARM_v4_Prop): Add. |
| (ARM_v5_Prop): Add |
| (State): Delete is_StrongARM boolean. Add is_v4 and is_v5 |
| booleans. |
| |
| * armemu.h (BUSUSEDINCPCS): Use is_v4 boolean. |
| (BUSUSEDINCPCN): Use is_v4 boolean. |
| |
| * arminit.c (ARMul_NewState): Initialise is_v4 and is_v5 fields. |
| (ARMul_SelectProcessor): Change second parameter from 'processor' |
| to 'properties'. Set is_v4 and is_v5 booleans in State. |
| |
| * armrdi.c: Remove use of ARM processor names. Replace with ARM |
| processor properties. |
| |
| * wrapper.c (sim_create_inferior): Choose properties passed to |
| ARMul_SelectProcessor based on machine number. |
| |
| 2000-08-14 Nick Clifton <nickc@redhat.com> |
| |
| * armemu.c (LHPOSTDOWN): Compute write back value before |
| performing load in case the offset register is overwritten. |
| (LHPOSTUP): Ditto. |
| |
| 2000-07-14 Fernando Nasser <fnasser@cygnus.com> |
| |
| * wrapper.c (sim_create_inferior): Fix typo in the previous patch. |
| |
| 2000-07-14 Fernando Nasser <fnasser@cygnus.com> |
| |
| * wrapper.c (sim_create_inferior): Reset mode to ARM when creating a |
| new inferior. |
| |
| 2000-07-04 Alexandre Oliva <aoliva@redhat.com> |
| |
| * armvirt.c (ABORTS): Do not define. |
| |
| * armdefs.h (struct ARMul_State): Add is_StrongARM. |
| (ARM_Strong_Prop, STRONGARM): Define. |
| * arminit.c (ARMul_NewState): Reset is_StrongARM. |
| (ARMul_SelectProcessor): Set is_StrongARM. |
| * wrapper.c (sim_create_inferior): Use bfd machine type to |
| determine processor type to emulate. |
| * armemu.h (BUSUSEDINCPCS, BUSUSEDINCPCN): Don't increment PC |
| when emulating StrongARM. |
| |
| * armemu.c (ARMul_Emulate, t_undefined): Proceed to next insn. |
| |
| * armemu.h (INSN_SIZE): New macro. |
| (SET_ABORT): Save CPSR in SPSR and set LR. |
| * armemu.c (ARMul_Emulate, isize): Set to INSN_SIZE. |
| (WriteR15, WriteSR15): Do not discard bit 1 in Thumb mode. |
| * arminit.c (ARMul_Abort): Use new SETABORT and INSN_SIZE. |
| |
| * armemu.c (LoadSMult): Use WriteR15() to discard the least |
| significant bits of PC. |
| |
| * armemu.h (WRITEDESTB): New macro. |
| * armemu.c (ARMul_Emulate26, bl): Use WriteR15Branch() to |
| modify PC. Moved the existing logic... |
| (WriteR15Branch): ... here. New function. |
| (WriteR15, WriteSR15): Drop the two least significant bits. |
| (LoadSMult): Use WriteR15Branch() to modify PC. |
| (LoadMult): Use WRITEDESTB() instead of WRITEDEST(). |
| |
| * armemu.h (GETSPSR): Call ARMul_GetSPSR(). |
| * armsupp.c (ARMul_CPSRAltered): Zero out bits as they're |
| extracted from state->Cpsr, but preserve the unused bits. |
| (ARMul_GetCPSR): Get bits preserved in state->Cpsr. |
| (ARMul_GetSPSR, ARMul_FixCPSR): Use ARMul_GetCPSR() to |
| get the full CPSR word. |
| |
| * armemu.h (PSR_FBITS, PSR_SBITS, PSR_XBITS, PSR_CBITS): New. |
| (SETPSR_F, SETPSR_S, SETPSR_X, SETPSR_C): New macros. |
| (SETPSR, SET_INTMODE, SETCC): Removed. |
| * armsupp.c (ARMul_FixCPSR, ARMul_FixSPSR): Do not test bit |
| mask. Use SETPSR_* to modify PSR. |
| (ARMul_SetCPSR): Load all bits from value. |
| * armemu.c (ARMul_Emulate, msr): Do not test bit mask. |
| |
| * armemu.c (ARMul_Emulate): Compute writeback value before |
| loading, since the offset register may be the destination |
| register. |
| |
| * armdefs.h (SYSTEMBANK): Define as USERBANK. |
| * armsupp.c (ARMul_SwitchMode): Remove SYSTEMBANK cases. |
| |
| 2000-06-22 Alexandre Oliva <aoliva@cygnus.com> |
| |
| * armemu.c (Multiply64): Fix computation of flag N. |
| |
| * armemu.c (MultiplyAdd64): Fix computation of flag N. |
| |
| 2000-06-20 Alexandre Oliva <aoliva@cygnus.com> |
| |
| * armemu.h (NEGBRANCH): Do not overwrite the two most significant |
| bits of the offset. |
| |
| 2000-05-25 Nick Clifton <nickc@cygnus.com> |
| |
| * armcopro.c (MMUMCR): Only indicate mode change if a singal has |
| really changed. |
| (MMUWrite): Only indicate mode change if a singal has really |
| changed. |
| |
| * armdefs.h (SYSTEMMODE): Define. |
| (BANK_CAN_ACEESS_SPSR): Define. |
| |
| * armemu.c (ARM_Emulate26): If the mode has changed allow the PC |
| to advance before stopping the emulation. |
| |
| * arminit.c (ARMul_Reset): Ensure Mode field of State is set |
| correctly. |
| |
| * armos.c (ARMul_OSInit): Create a initial stack pointer for |
| System mode. |
| |
| * armsupp.c (ModeToBank): Remove unused first parameter. |
| Add support for System Mode. |
| (ARMul_GetSPSR): Use BANK_CAN_ACCESS_SPSR macro. |
| (ARMul_SetSPSR): Use BANK_CAN_ACCESS_SPSR macro. |
| (ARMul_FixSPSR): Use BANK_CAN_ACCESS_SPSR macro. |
| (ARMulSwitchMode): Add support for System Mode. |
| |
| Wed May 24 14:40:34 2000 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| 2000-05-23 Nick Clifton <nickc@cygnus.com> |
| |
| * wrapper.c (sim_store_register): Special handling for CPSR |
| register. |
| |
| 2000-03-11 Philip Blundell <philb@gnu.org> |
| |
| * armemu.c (LoadSMult, LoadMult): Correct handling of aborts. |
| Patch from Allan Skillman <Allan.Skillman@arm.com>. |
| |
| Wed Mar 22 15:24:21 2000 glen mccready <gkm@pobox.com> |
| |
| * wrapper.c (sim_open,sim_close): Copy into myname, free myname. |
| |
| 2000-02-08 Nick Clifton <nickc@cygnus.com> |
| |
| * wrapper.c: Fix compile time warning messages. |
| * armcopro.c: Fix compile time warning messages. |
| * armdefs.h: Fix compile time warning messages. |
| * armemu.c: Fix compile time warning messages. |
| * armemu.h: Fix compile time warning messages. |
| * armos.c: Fix compile time warning messages. |
| * armsupp.c: Fix compile time warning messages. |
| * armvirt.c: Fix compile time warning messages. |
| * bag.c: Fix compile time warning messages. |
| |
| 2000-02-02 Bernd Schmidt <bernds@cygnus.co.uk> |
| |
| * *.[ch]: Use indent to make readable. |
| |
| 1999-11-22 Nick Clifton <nickc@cygnus.com> |
| |
| * armos.c (SWIread): Generate an error message if a huge read is |
| performed. |
| (SWIwrite): Generate an error message if a huge write is |
| performed. |
| |
| 1999-10-27 Nick Clifton <nickc@cygnus.com> |
| |
| * thumbemu.c (ARMul_ThumbDecode): Accept 0xbebe as a thumb |
| breakpoint. |
| |
| 1999-10-08 Ulrich Drepper <drepper@cygnus.com> |
| |
| * armos.c (SWIopen): Always pass third parameter with 0666 since |
| otherwise uninitialized memory gets access if the O_CREAT bit is |
| set and so we possibly cannot access the file afterwards. |
| |
| 1999-09-29 Doug Evans <devans@casey.cygnus.com> |
| |
| * armos.c (SWIWrite0): Send output to stdout instead of stderr. |
| (ARMul_OSHandleSWI, case SWI_WriteC,AngelSWI_Reason_WriteC): Ditto. |
| |
| Thu Sep 2 18:15:53 1999 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| 1999-05-08 Felix Lee <flee@cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| 1999-04-06 Keith Seitz <keiths@cygnus.com> |
| |
| * wrapper.c (stop_simulator): New global. |
| (sim_stop): Set sim state to STOP and set |
| stop_simulator. |
| (sim_resume): Reset stop_simulator. |
| (sim_stop_reason): If stop_simulator is set, tell gdb |
| that the we took SIGINT. |
| * armemu.c (ARMul_Emulate26): Don't loop forever. Stop if |
| stop_simulator is set. |
| |
| 1999-04-02 Keith Seitz <keiths@cygnus.com> |
| |
| * armemu.c (ARMul_Emulate26): If NEED_UI_LOOP_HOOK, call ui_loop_hook |
| whenever the counter expires. |
| * Makefile.in (SIM_EXTRA_CFLAGS): Include define NEED_UI_LOOP_HOOK. |
| |
| 1999-03-24 Nick Clifton <nickc@cygnus.com> |
| |
| * armemu.c (ARMul_Emulate26): Handle new breakpoint value. |
| * thumbemu.c (ARMul_ThumbDecode): Handle new breakpoint value. |
| |
| Mon Sep 14 09:00:05 1998 Nick Clifton <nickc@cygnus.com> |
| |
| * wrapper.c (sim_open): Set endianness according to BFD or command |
| line switch. |
| |
| * tconfig.in: Define SIM_HAVE_BIENDIAN. |
| |
| Thu Aug 27 11:00:05 1998 Nick Clifton <nickc@cygnus.com> |
| |
| * armemu.c (Multiply64): Test for Rm (rather than Rs) not being |
| the same as either RdHi or RdLo. |
| |
| Thu Jul 2 10:24:35 1998 Nick Clifton <nickc@cygnus.com> |
| |
| * armos.c (ARMul_OSHandleSWI: AngelSWI_Reason_ReportException): |
| Set Reg[0] based on reason for for the exception. |
| |
| Thu Jun 4 15:22:03 1998 Jason Molenda (crash@bugshack.cygnus.com) |
| |
| * armos.c (SWIwrite0): New function. |
| (WriteCommandLineTo): New function. |
| (SWIopen): New function. |
| (SWIread): New function. |
| (SWIwrite): New function. |
| (SWIflen): New function. |
| (ARMul_OSHandleSWI): Call new functions instead of handling |
| these here. |
| (ARMul_OSHandleSWI): Handle Angel SWIs correctly. |
| (*): Reformat spacing to be a bit more GNUly. |
| Most code taken from a patch by Anthony Thompson |
| (athompso@cambridge.arm.com) |
| |
| Tue Jun 2 15:22:22 1998 Nick Clifton <nickc@cygnus.com> |
| |
| * armos.h: Add Angel SWI and its reason codes. |
| * armos.c (ARMul_OSHandleSWI): Ignore Angel SWIs (for now). |
| |
| Mon Jun 1 17:14:19 1998 Anthony Thompson (athompso@cambridge.arm.com) |
| |
| * armos.c (ARMul_OSHandleSWI::SWI_Open): Handle special case |
| of ":tt" to catch stdin in addition to stdout. |
| (ARMul_OSHandleSWI::SWI_Seek): Return 0 or 1 to indicate failure |
| or success of lseek(). |
| |
| Wed May 20 17:36:25 1998 Nick Clifton <nickc@cygnus.com> |
| |
| * armos.c (ARMul_OSHandleSWI): Special case code to catch attempts |
| to open stdout. |
| |
| Wed Apr 29 15:29:55 1998 Jeff Johnston <jjohnstn@cygnus.com> |
| |
| * armos.c (ARMul_OSHandleSWI): Added code for SWI_Clock, |
| SWI_Flen, and SWI_Time. Also fixed SWI_Seek code to only |
| seek from offset 0 and not to use R2 for whence since it is |
| not passed as part of the SWI call. |
| |
| Tue Apr 28 18:33:31 1998 Geoffrey Noer <noer@cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Sun Apr 26 15:31:55 1998 Tom Tromey <tromey@creche> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Sun Apr 26 15:20:26 1998 Tom Tromey <tromey@cygnus.com> |
| |
| * acconfig.h: New file. |
| * configure.in: Reverted change of Apr 24; use sinclude again. |
| |
| Fri Apr 24 14:16:40 1998 Tom Tromey <tromey@creche> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Fri Apr 24 11:20:19 1998 Tom Tromey <tromey@cygnus.com> |
| |
| * configure.in: Don't call sinclude. |
| |
| Sat Apr 4 20:36:25 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Fri Mar 27 16:15:52 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Mar 25 12:35:29 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Mar 18 12:38:12 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Tue Mar 10 09:26:38 1998 Nick Clifton <nickc@cygnus.com> |
| |
| * armopts.h: Remove definition of LITTLEND - it is not used. |
| |
| Tue Feb 17 12:35:54 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * wrapper.c (sim_store_register, sim_fetch_register): Pass in |
| length parameter. Return -1. |
| |
| Sun Feb 1 16:47:51 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Sat Jan 31 18:15:41 1998 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Jan 19 22:26:29 1998 Doug Evans <devans@seba> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Dec 15 23:17:11 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Tue Dec 9 11:30:48 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * Makefile.in: Updated with changes from branch. |
| * armdefs.h: ditto |
| * armemu.c: ditto these changes |
| * armemu.h: ditto add support for |
| * armos.c: ditto the Thumb instruction |
| * armsupp.c: ditto set and the new v4 |
| * armvirt.c: ditto architecture. |
| * wrapper.c: ditto |
| * thumbemu.c: New file from branch. |
| |
| |
| Thu Dec 4 09:21:05 1997 Doug Evans <devans@canuck.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Thu Oct 30 13:54:06 1997 Nick Clifton <nickc@cygnus.com> |
| |
| * armos.c (ARMul_OSHandleSWI): Add support for GetEnv SWI. Patch |
| from Tony Thompson at ARM: athompso@arm.com |
| |
| * wrapper.c (sim_create_inferior): Add code to create an execution |
| environment. Patch from Tony Thompson at ARM: athompso@arm.com |
| |
| Wed Oct 22 14:43:00 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * wrapper.c (sim_load): Pass lma_p and sim_write args to |
| sim_load_file. |
| |
| Fri Oct 3 09:28:00 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Sep 24 17:38:57 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Tue Sep 23 11:04:38 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Sep 22 11:46:20 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Fri Sep 19 17:45:25 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Sep 15 17:36:15 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Thu Sep 4 17:21:23 1997 Doug Evans <dje@seba> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Aug 27 18:13:22 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Tue Aug 26 10:37:27 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * wrapper.c (sim_kill): Delete. |
| (sim_create_inferior): Add ABFD argument. |
| (sim_load): Move setting of PC from here. |
| (sim_create_inferior): To here. |
| |
| Mon Aug 25 17:50:22 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Mon Aug 25 15:35:45 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * wrapper.c (sim_open): Add ABFD argument. |
| |
| Tue May 20 10:13:26 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * wrapper.c (sim_open): Add callback argument. |
| (sim_set_callbacks): Drop SIM_DESC argument. |
| |
| Thu Apr 24 00:39:51 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Fri Apr 18 13:32:23 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * wrapper.c (sim_stop): Stub sim_stop function. |
| |
| Thu Apr 17 18:33:01 1997 Fred Fish <fnf@cygnus.com> |
| |
| * arminit.c (ARMul_NewState): Preinitialize the state to |
| all zero/NULL. |
| |
| Thu Apr 17 02:39:02 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * Makefile.in (SIM_OBJS): Add sim-load.o. |
| * wrapper.c (sim_kind,myname): New static locals. |
| (sim_open): Set sim_kind, myname. |
| (sim_load): Call sim_load_file to do work. Set start address from bfd. |
| (sim_create_inferior): Return SIM_RC. Delete start_address arg. |
| |
| Thu Apr 17 11:48:25 1997 Andrew Cagney <cagney@b1.cygnus.com> |
| |
| * wrapper.c (sim_trace): Update so that it matches prototype. |
| |
| Mon Apr 7 15:45:02 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| * config.in: Ditto. |
| |
| Mon Apr 7 12:01:17 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * Makefile.in (armemu32.o): Replace $< with autoconf recommended |
| $(srcdir)/.... |
| (armemu26.o): Ditto. |
| |
| Wed Apr 2 15:06:28 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * wrapper.c (sim_open): New arg `kind'. |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Apr 2 14:50:44 1997 Ian Lance Taylor <ian@cygnus.com> |
| |
| * COPYING: Update FSF address. |
| |
| Wed Apr 2 14:34:19 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Wed Mar 19 01:14:00 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure: Regenerated to track ../common/aclocal.m4 changes. |
| |
| Mon Mar 17 15:10:07 1997 Andrew Cagney <cagney@kremvax.cygnus.com> |
| |
| * configure: Re-generate. |
| |
| Fri Mar 14 10:34:11 1997 Michael Meissner <meissner@cygnus.com> |
| |
| * configure: Regenerate to track ../common/aclocal.m4 changes. |
| |
| Thu Mar 13 12:38:56 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * wrapper.c (sim_open): Has result now. |
| (sim_*): New SIM_DESC argument. |
| |
| Tue Feb 4 13:22:21 1997 Doug Evans <dje@canuck.cygnus.com> |
| |
| * Makefile.in (@COMMON_MAKEFILE_FRAG@): Use |
| COMMON_{PRE,POST}_CONFIG_FRAG instead. |
| * configure.in: sinclude ../common/aclocal.m4. |
| * configure: Regenerated. |
| |
| Thu Jan 23 11:46:23 1997 Stu Grossman (grossman@critters.cygnus.com) |
| |
| * configure configure.in Makefile.in: Update to new configure |
| scheme which is more compatible with WinGDB builds. |
| * configure.in: Improve comment on how to run autoconf. |
| * configure: Re-run autoconf to get new ../common/aclocal.m4. |
| * Makefile.in: Use autoconf substitution to install common |
| makefile fragment. |
| |
| Wed Nov 20 01:05:10 1996 Doug Evans <dje@canuck.cygnus.com> |
| |
| * run.c: Deleted, use one in ../common now. |
| * Makefile.in: Delete everything that's been moved to |
| ../common/Make-common.in. |
| (SIM_OBJS): Define. |
| * configure.in: Simplify using macros in ../common/aclocal.m4. |
| * configure: Regenerated. |
| * config.in: New file. |
| * armos.c: #include config.h. |
| * wrapper.c (mem_size): Value is in bytes now. |
| (sim_callback): New global. |
| (arm_sim_set_profile{,_size}): Delete. |
| (arm_sim_set_mem_size): Rename to sim_size. |
| (sim_do_command): Call printf_filtered via callback. |
| (sim_set_callbacks): Record callback. |
| |
| Thu Oct 3 16:10:27 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) |
| |
| * Makefile.in (mostlyclean): Remove config.log. |
| |
| Wed Jun 26 12:17:24 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) |
| |
| * Makefile.in (bindir, libdir, datadir, mandir, infodir, includedir, |
| INSTALL_PROGRAM, INSTALL_DATA): Use autoconf-set values. |
| (docdir): Removed. |
| * configure.in (AC_PREREQ): autoconf 2.5 or higher. |
| (AC_PROG_INSTALL): Added. |
| * configure: Rebuilt. |
| |
| Wed Feb 21 12:14:31 1996 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure: Regenerate with autoconf 2.7. |
| |
| Fri Dec 15 16:27:30 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * run.c (main): Use new bfd_big_endian macro. |
| |
| Mon Nov 20 17:40:38 1995 Doug Evans <dje@canuck.cygnus.com> |
| |
| * run.c: Include "getopt.h". |
| (verbose): Delete. |
| (usage): Make static. |
| (main): Call arm_sim_set_verbosity. |
| Only load sections marked SEC_LOAD. |
| * wrapper.c (mem_size, verbosity): New static global. |
| (arm_sim_set_mem_size): Renamed from sim_size. Callers updated. |
| (arm_sim_set_profile{,_size}): Renamed from sim_foo. Callers updated. |
| |
| Fri Nov 17 19:35:11 1995 Doug Evans <dje@canuck.cygnus.com> |
| |
| * armdefs.h (ARMul_State): New member `verbose'. |
| * armrdi.c (ARMul_ConsolePrint): Add missing va_end. |
| * run.c (verbose): Make global. |
| * wrapper.c (init): Set state->verbose. |
| (ARMul_ConsolePrint): Don't print anything if !verbose. |
| |
| Fri Oct 13 15:30:30 1995 Doug Evans <dje@canuck.cygnus.com> |
| |
| * armos.c: #include dbg_rdi.h. |
| (ARMul_OSHandleSWI): Handle SWI_Breakpoint. |
| * armos.h (SWI_Breakpoint): Define. |
| * wrapper.c: #include armemu.h, dbg_rdi.h. |
| (rc): Delete. |
| (sim_resume): Use state->EndCondition to record stop state. |
| Call FLUSHPIPE before returning. |
| (sim_stop_reason): Determine reason from state->EndCondition. |
| |
| Fri Oct 13 15:04:05 1995 steve chamberlain <sac@slash.cygnus.com> |
| |
| * wrapper.c (sim_set_callbacks): New. |
| |
| Thu Sep 28 19:45:56 1995 Doug Evans <dje@deneb.cygnus.com> |
| |
| * armos.c (ARMul_OSHandleSWI): Result of read/write calls is |
| number of bytes not read/written (or -1). |
| |
| Wed Sep 20 13:35:54 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * Makefile.in (maintainer-clean): New synonym for realclean. |
| |
| Fri Sep 8 14:27:20 1995 Ian Lance Taylor <ian@cygnus.com> |
| |
| * configure.in: Remove AC_PROG_INSTALL. |
| * configure: Rebuild. |
| * Makefile.in (INSTALL): Revert to using install.sh. |
| (INSTALL_PROGRAM, INSTALL_DATA): Set to $(INSTALL). |
| (INSTALL_XFORM, INSTALL_XFORM1): Restore. |
| (mostlyclean): Make the same as clean, not distclean. |
| (clean): Remove config.log. |
| (install): Don't install in $(tooldir). |
| |
| Thu Sep 7 12:00:17 1995 Doug Evans <dje@canuck.cygnus.com> |
| |
| (Try to) Update to new bfd autoconf scheme. |
| * run.c: Don't include sysdep.h. |
| * Makefile.in (INSTALL{,_PROGRAM,_DATA}): Use autoconf computed value. |
| (CC, CFLAGS, AR, RANLIB): Likewise. |
| (HDEFINES, TDEFINES): Define. |
| (CC_FOR_BUILD): Delete. |
| (host_makefile_frag): Delete. |
| (Makefile): Don't depend on frags. |
| * configure.in (sysdep.h): Don't create symlink. |
| (host_makefile_frag, frags): Deleted. |
| (CC, CFLAGS, AR, RANLIB, INSTALL): Compute values. |
| * configure: Regenerated. |
| |
| Thu Aug 3 10:45:37 1995 Fred Fish <fnf@cygnus.com> |
| |
| * Update all FSF addresses except those in COPYING* files. |
| |
| Wed Jul 5 16:15:54 1995 J.T. Conklin <jtc@rtl.cygnus.com> |
| |
| * Makefile.in (clean): Remove run, libsim.a. |
| |
| * Makefile.in, configure.in: converted to autoconf. |
| * configure: New file, generated with autconf 2.4. |
| |
| * arm.mt: Removed. |
| |
| Fri Jun 30 16:49:47 1995 Stan Shebs <shebs@andros.cygnus.com> |
| |
| * wrapper.c (sim_do_command): New function. |
| |
| Tue Jun 13 10:57:32 1995 Steve Chamberlain <sac@slash.cygnus.com> |
| |
| * armos.c (ARMul_OSHandleSWI): New version to work with |
| newlib simply. |
| |
| Thu Jun 8 14:37:14 1995 Steve Chamberlain <sac@slash.cygnus.com> |
| |
| * run.c (main): Grab return value from right register. |
| |
| Wed May 24 14:37:31 1995 Steve Chamberlain <sac@slash.cygnus.com> |
| |
| * New. |
