# Makefile.in generated automatically by automake 1.4 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.


SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@

top_builddir = .

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_alias = @build_alias@
build_triplet = @build@
host_alias = @host_alias@
host_triplet = @host@
target_alias = @target_alias@
target_triplet = @target@
AR = @AR@
AS = @AS@
BUILD_DLLTOOL = @BUILD_DLLTOOL@
BUILD_DLLWRAP = @BUILD_DLLWRAP@
BUILD_MISC = @BUILD_MISC@
BUILD_NLMCONV = @BUILD_NLMCONV@
BUILD_SRCONV = @BUILD_SRCONV@
BUILD_WINDRES = @BUILD_WINDRES@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
DATADIRNAME = @DATADIRNAME@
DLLTOOL = @DLLTOOL@
DLLTOOL_DEFS = @DLLTOOL_DEFS@
EXEEXT = @EXEEXT@
GMOFILES = @GMOFILES@
GMSGFMT = @GMSGFMT@
GT_NO = @GT_NO@
GT_YES = @GT_YES@
HDEFINES = @HDEFINES@
INCLUDE_LOCALE_H = @INCLUDE_LOCALE_H@
INSTOBJEXT = @INSTOBJEXT@
INTLDEPS = @INTLDEPS@
INTLOBJS = @INTLOBJS@
LD = @LD@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
NLMCONV_DEFS = @NLMCONV_DEFS@
NM = @NM@
PACKAGE = @PACKAGE@
POFILES = @POFILES@
POSUB = @POSUB@
RANLIB = @RANLIB@
UNDERSCORE = @UNDERSCORE@
USE_INCLUDED_LIBINTL = @USE_INCLUDED_LIBINTL@
USE_NLS = @USE_NLS@
USE_SYMBOL_UNDERSCORE = @USE_SYMBOL_UNDERSCORE@
VERSION = @VERSION@
l = @l@

INTLLIBS = @INTLLIBS@

AUTOMAKE_OPTIONS = cygnus dejagnu

SUBDIRS = po

tooldir = $(exec_prefix)/$(target_alias)

CC_FOR_BUILD = @CC_FOR_BUILD@
EXEEXT_FOR_BUILD = @EXEEXT_FOR_BUILD@

YACC = `if [ -f ../bison/bison ] ; then echo ../bison/bison -y -L$(srcdir)/../bison/ ; else echo bison -y ; fi`
YFLAGS = -d
LEX = `if [ -f ../flex/flex ] ; then echo ../flex/flex ; else echo flex ; fi`

# these two are almost the same program
AR_PROG = ar
RANLIB_PROG = ranlib

# objcopy and strip should be the same program
OBJCOPY_PROG = objcopy
STRIP_PROG = strip-new

STRINGS_PROG = strings

READELF_PROG = readelf

# These should all be the same program too.
SIZE_PROG = size
NM_PROG = nm-new
OBJDUMP_PROG = objdump

# This is the demangler, as a standalone program.
# Note: This one is used as the installed name too, unlike the above.
DEMANGLER_PROG = c++filt

ADDR2LINE_PROG = addr2line

NLMCONV_PROG = nlmconv
DLLTOOL_PROG = dlltool
WINDRES_PROG = windres
DLLWRAP_PROG = dllwrap

SRCONV_PROG = srconv$(EXEEXT) sysdump$(EXEEXT) coffdump$(EXEEXT) 

man_MANS = ar.1 nm.1 objdump.1 ranlib.1 size.1 strings.1 strip.1 objcopy.1 \
	addr2line.1 nlmconv.1 $(DEMANGLER_PROG).1


PROGS = $(SIZE_PROG) $(OBJDUMP_PROG) $(NM_PROG) $(AR_PROG) $(STRINGS_PROG) $(STRIP_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ $(ADDR2LINE_PROG) $(READELF_PROG) @BUILD_DLLWRAP@ @BUILD_MISC@

bin_PROGRAMS = $(SIZE_PROG) $(OBJDUMP_PROG) $(AR_PROG) $(STRINGS_PROG) $(RANLIB_PROG) $(DEMANGLER_PROG) $(OBJCOPY_PROG) @BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ $(ADDR2LINE_PROG) $(READELF_PROG) @BUILD_DLLWRAP@ @BUILD_MISC@

noinst_PROGRAMS = $(NM_PROG) $(STRIP_PROG)

EXTRA_PROGRAMS = $(NLMCONV_PROG) srconv sysdump coffdump $(DLLTOOL_PROG) $(WINDRES_PROG) $(DLLWRAP_PROG)

# Stuff that goes in tooldir/ if appropriate
TOOL_PROGS = nm-new strip-new ar ranlib dlltool

BASEDIR = $(srcdir)/..
BFDDIR = $(BASEDIR)/bfd
INCDIR = $(BASEDIR)/include

DEP = mkdep

INCLUDES = -D_GNU_SOURCE -I. -I$(srcdir) -I../bfd -I$(BFDDIR) -I$(INCDIR) @HDEFINES@ -I$(srcdir)/../intl -I../intl -DLOCALEDIR="\"$(prefix)/share/locale\""

HFILES = arsup.h bucomm.h budbg.h coffgrok.h debug.h nlmconv.h dlltool.h \
	windres.h winduni.h dyn-string.h


GENERATED_HFILES = arparse.h sysroff.h sysinfo.h defparse.h

CFILES = addr2line.c ar.c arsup.c bucomm.c coffdump.c coffgrok.c debug.c \
	dlltool.c filemode.c ieee.c is-ranlib.c is-strip.c maybe-ranlib.c \
	maybe-strip.c nlmconv.c nm.c not-ranlib.c not-strip.c \
	objcopy.c objdump.c prdbg.c rdcoff.c rddbg.c size.c srconv.c \
	stabs.c strings.c sysdump.c version.c wrstabs.c \
	windres.c resrc.c rescoff.c resbin.c winduni.c readelf.c \
	resres.c dyn-string.c dllwrap.c rename.c


GENERATED_CFILES = \
	underscore.c arparse.c arlex.c sysroff.c sysinfo.c syslex.c \
	defparse.c deflex.c nlmheader.c rcparse.c rclex.c


DEBUG_SRCS = rddbg.c debug.c stabs.c ieee.c rdcoff.c
WRITE_DEBUG_SRCS = $(DEBUG_SRCS) wrstabs.c

# Code shared by all the binutils.
BULIBS = bucomm.c version.c filemode.c

BFDLIB = ../bfd/libbfd.la

OPCODES = ../opcodes/libopcodes.la

LIBIBERTY = ../libiberty/libiberty.a

POTFILES = $(CFILES) $(DEBUG_SRCS) $(HFILES)

EXPECT = `if [ -f $$r/../expect/expect ] ; then \
          echo $$r/../expect/expect ; \
          else echo expect ; fi`

RUNTEST = `if [ -f ${srcdir}/../dejagnu/runtest ] ; then \
           echo ${srcdir}/../dejagnu/runtest ; \
           else echo runtest ;  fi`


CC_FOR_TARGET = ` \
  if [ -f $$r/../gcc/xgcc ] ; then \
    if [ -f $$r/../newlib/Makefile ] ; then \
      echo $$r/../gcc/xgcc -B$$r/../gcc/ -idirafter $$r/../newlib/targ-include -idirafter $${srcroot}/../newlib/libc/include -nostdinc; \
    else \
      echo $$r/../gcc/xgcc -B$$r/../gcc/; \
    fi; \
  else \
    if [ "@host@" = "@target@" ] ; then \
      echo $(CC); \
    else \
      echo gcc | sed '$(transform)'; \
    fi; \
  fi`


info_TEXINFOS = binutils.texi

LDADD = $(BFDLIB) $(LIBIBERTY) $(INTLLIBS)

size_SOURCES = size.c $(BULIBS)

objcopy_SOURCES = objcopy.c not-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)

strings_SOURCES = strings.c $(BULIBS)

readelf_SOURCES = readelf.c version.c
readelf_LDADD = $(INTLLIBS) $(LIBIBERTY)

strip_new_SOURCES = objcopy.c is-strip.c rename.c $(WRITE_DEBUG_SRCS) $(BULIBS)

nm_new_SOURCES = nm.c $(BULIBS)

objdump_SOURCES = objdump.c prdbg.c $(DEBUG_SRCS) $(BULIBS)
objdump_LDADD = $(OPCODES) $(BFDLIB) $(LIBIBERTY) $(INTLLIBS)

c__filt_SOURCES = 
c__filt_LDADD = cplus-dem.o underscore.o $(LIBIBERTY) $(INTLLIBS)

ar_SOURCES = arparse.y arlex.l ar.c not-ranlib.c arsup.c rename.c $(BULIBS)
ar_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(INTLLIBS)

ranlib_SOURCES = ar.c is-ranlib.c arparse.y arlex.l arsup.c rename.c $(BULIBS)
ranlib_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(INTLLIBS)

addr2line_SOURCES = addr2line.c $(BULIBS)

srconv_SOURCES = srconv.c coffgrok.c $(BULIBS)

dlltool_SOURCES = dlltool.c defparse.y deflex.l $(BULIBS)
dlltool_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(INTLLIBS)

coffdump_SOURCES = coffdump.c coffgrok.c $(BULIBS)

sysdump_SOURCES = sysdump.c $(BULIBS)

nlmconv_SOURCES = nlmconv.c nlmheader.y $(BULIBS)

windres_SOURCES = windres.c resrc.c rescoff.c resbin.c rcparse.y rclex.l \
	winduni.c resres.c $(BULIBS)

windres_LDADD = $(BFDLIB) $(LIBIBERTY) @LEXLIB@ $(INTLLIBS)

dllwrap_SOURCES = dllwrap.c dyn-string.c 
dllwrap_LDADD = $(LIBIBERTY)

DISTSTUFF = arparse.c arparse.h arlex.c nlmheader.c sysinfo.c sysinfo.h \
	syslex.c deflex.c defparse.h defparse.c rclex.c rcparse.h rcparse.c


DISTCLEANFILES = stamp-under sysinfo underscore.c sysroff.c sysroff.h \
	site.exp site.bak


MAINTAINERCLEANFILES = config.texi

MOSTLYCLEANFILES = sysinfo $(DEMANGLER_PROG).1 binutils.log binutils.sum \
	abcdefgh*


CLEANFILES = dep.sed .dep .dep1
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = 
bin_PROGRAMS =  size$(EXEEXT) objdump$(EXEEXT) ar$(EXEEXT) \
strings$(EXEEXT) ranlib$(EXEEXT) c++filt$(EXEEXT) objcopy$(EXEEXT) \
@BUILD_NLMCONV@ @BUILD_SRCONV@ @BUILD_DLLTOOL@ @BUILD_WINDRES@ \
addr2line$(EXEEXT) readelf$(EXEEXT) @BUILD_DLLWRAP@ @BUILD_MISC@
noinst_PROGRAMS =  nm-new$(EXEEXT) strip-new$(EXEEXT)
PROGRAMS =  $(bin_PROGRAMS) $(noinst_PROGRAMS)


DEFS = @DEFS@ -I. -I$(srcdir) -I.
CPPFLAGS = @CPPFLAGS@
LDFLAGS = @LDFLAGS@
LIBS = @LIBS@
nlmconv_OBJECTS =  nlmconv.o nlmheader.o bucomm.o version.o filemode.o
nlmconv_LDADD = $(LDADD)
nlmconv_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
nlmconv_LDFLAGS = 
srconv_OBJECTS =  srconv.o coffgrok.o bucomm.o version.o filemode.o
srconv_LDADD = $(LDADD)
srconv_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
srconv_LDFLAGS = 
sysdump_OBJECTS =  sysdump.o bucomm.o version.o filemode.o
sysdump_LDADD = $(LDADD)
sysdump_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
sysdump_LDFLAGS = 
coffdump_OBJECTS =  coffdump.o coffgrok.o bucomm.o version.o filemode.o
coffdump_LDADD = $(LDADD)
coffdump_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
coffdump_LDFLAGS = 
dlltool_OBJECTS =  dlltool.o defparse.o deflex.o bucomm.o version.o \
filemode.o
dlltool_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
dlltool_LDFLAGS = 
windres_OBJECTS =  windres.o resrc.o rescoff.o resbin.o rcparse.o \
rclex.o winduni.o resres.o bucomm.o version.o filemode.o
windres_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
windres_LDFLAGS = 
dllwrap_OBJECTS =  dllwrap.o dyn-string.o
dllwrap_DEPENDENCIES =  ../libiberty/libiberty.a
dllwrap_LDFLAGS = 
size_OBJECTS =  size.o bucomm.o version.o filemode.o
size_LDADD = $(LDADD)
size_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
size_LDFLAGS = 
objdump_OBJECTS =  objdump.o prdbg.o rddbg.o debug.o stabs.o ieee.o \
rdcoff.o bucomm.o version.o filemode.o
objdump_DEPENDENCIES =  ../opcodes/libopcodes.la ../bfd/libbfd.la \
../libiberty/libiberty.a
objdump_LDFLAGS = 
ar_OBJECTS =  arparse.o arlex.o ar.o not-ranlib.o arsup.o rename.o \
bucomm.o version.o filemode.o
ar_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
ar_LDFLAGS = 
strings_OBJECTS =  strings.o bucomm.o version.o filemode.o
strings_LDADD = $(LDADD)
strings_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
strings_LDFLAGS = 
ranlib_OBJECTS =  ar.o is-ranlib.o arparse.o arlex.o arsup.o rename.o \
bucomm.o version.o filemode.o
ranlib_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
ranlib_LDFLAGS = 
c__filt_OBJECTS = 
c__filt_DEPENDENCIES =  cplus-dem.o underscore.o \
../libiberty/libiberty.a
c__filt_LDFLAGS = 
objcopy_OBJECTS =  objcopy.o not-strip.o rename.o rddbg.o debug.o \
stabs.o ieee.o rdcoff.o wrstabs.o bucomm.o version.o filemode.o
objcopy_LDADD = $(LDADD)
objcopy_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
objcopy_LDFLAGS = 
addr2line_OBJECTS =  addr2line.o bucomm.o version.o filemode.o
addr2line_LDADD = $(LDADD)
addr2line_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
addr2line_LDFLAGS = 
readelf_OBJECTS =  readelf.o version.o
readelf_DEPENDENCIES =  ../libiberty/libiberty.a
readelf_LDFLAGS = 
nm_new_OBJECTS =  nm.o bucomm.o version.o filemode.o
nm_new_LDADD = $(LDADD)
nm_new_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
nm_new_LDFLAGS = 
strip_new_OBJECTS =  objcopy.o is-strip.o rename.o rddbg.o debug.o \
stabs.o ieee.o rdcoff.o wrstabs.o bucomm.o version.o filemode.o
strip_new_LDADD = $(LDADD)
strip_new_DEPENDENCIES =  ../bfd/libbfd.la ../libiberty/libiberty.a
strip_new_LDFLAGS = 
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LEXLIB = @LEXLIB@
YLWRAP = $(top_srcdir)/../ylwrap
CFLAGS = @CFLAGS@
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
TEXI2DVI = `if test -f $(top_srcdir)/../texinfo/util/texi2dvi; then echo $(top_srcdir)/../texinfo/util/texi2dvi; else echo texi2dvi; fi`
TEXINFO_TEX = $(top_srcdir)/../texinfo/texinfo.tex
INFO_DEPS = binutils.info
DVIS = binutils.dvi
TEXINFOS = binutils.texi
man1dir = $(mandir)/man1
MANS = $(man_MANS)

NROFF = nroff
DIST_COMMON =  README ./stamp-h.in ChangeLog Makefile.am Makefile.in \
NEWS acinclude.m4 aclocal.m4 arlex.c arparse.c config.in configure \
configure.in deflex.c defparse.c nlmheader.c rclex.c rcparse.c


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = tar
GZIP_ENV = --best
SOURCES = $(nlmconv_SOURCES) $(srconv_SOURCES) $(sysdump_SOURCES) $(coffdump_SOURCES) $(dlltool_SOURCES) $(windres_SOURCES) $(dllwrap_SOURCES) $(size_SOURCES) $(objdump_SOURCES) $(ar_SOURCES) $(strings_SOURCES) $(ranlib_SOURCES) $(c__filt_SOURCES) $(objcopy_SOURCES) $(addr2line_SOURCES) $(readelf_SOURCES) $(nm_new_SOURCES) $(strip_new_SOURCES)
OBJECTS = $(nlmconv_OBJECTS) $(srconv_OBJECTS) $(sysdump_OBJECTS) $(coffdump_OBJECTS) $(dlltool_OBJECTS) $(windres_OBJECTS) $(dllwrap_OBJECTS) $(size_OBJECTS) $(objdump_OBJECTS) $(ar_OBJECTS) $(strings_OBJECTS) $(ranlib_OBJECTS) $(c__filt_OBJECTS) $(objcopy_OBJECTS) $(addr2line_OBJECTS) $(readelf_OBJECTS) $(nm_new_OBJECTS) $(strip_new_OBJECTS)

all: all-redirect
.SUFFIXES:
.SUFFIXES: .S .c .dvi .info .l .lo .o .ps .s .texi .texinfo .txi .y
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in  acinclude.m4
	cd $(srcdir) && $(ACLOCAL)

config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck
$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
	cd $(srcdir) && $(AUTOCONF)

config.h: stamp-h
	@if test ! -f $@; then \
		rm -f stamp-h; \
		$(MAKE) stamp-h; \
	else :; fi
stamp-h: $(srcdir)/config.in $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES= CONFIG_HEADERS=config.h:config.in \
	     $(SHELL) ./config.status
	@echo timestamp > stamp-h 2> /dev/null
$(srcdir)/config.in: @MAINTAINER_MODE_TRUE@$(srcdir)/stamp-h.in
	@if test ! -f $@; then \
		rm -f $(srcdir)/stamp-h.in; \
		$(MAKE) $(srcdir)/stamp-h.in; \
	else :; fi
$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOHEADER)
	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null

mostlyclean-hdr:

clean-hdr:

distclean-hdr:
	-rm -f config.h

maintainer-clean-hdr:

mostlyclean-binPROGRAMS:

clean-binPROGRAMS:
	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)

distclean-binPROGRAMS:

maintainer-clean-binPROGRAMS:

install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(bindir)
	@list='$(bin_PROGRAMS)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
	    $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	  else :; fi; \
	done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	list='$(bin_PROGRAMS)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(bindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	done

mostlyclean-noinstPROGRAMS:

clean-noinstPROGRAMS:
	-test -z "$(noinst_PROGRAMS)" || rm -f $(noinst_PROGRAMS)

distclean-noinstPROGRAMS:

maintainer-clean-noinstPROGRAMS:

.c.o:
	$(COMPILE) -c $<

.s.o:
	$(COMPILE) -c $<

.S.o:
	$(COMPILE) -c $<

mostlyclean-compile:
	-rm -f *.o core *.core

clean-compile:

distclean-compile:
	-rm -f *.tab.c

maintainer-clean-compile:

.c.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.s.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.S.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:

maintainer-clean-libtool:

nlmconv$(EXEEXT): $(nlmconv_OBJECTS) $(nlmconv_DEPENDENCIES)
	@rm -f nlmconv$(EXEEXT)
	$(LINK) $(nlmconv_LDFLAGS) $(nlmconv_OBJECTS) $(nlmconv_LDADD) $(LIBS)

srconv$(EXEEXT): $(srconv_OBJECTS) $(srconv_DEPENDENCIES)
	@rm -f srconv$(EXEEXT)
	$(LINK) $(srconv_LDFLAGS) $(srconv_OBJECTS) $(srconv_LDADD) $(LIBS)

sysdump$(EXEEXT): $(sysdump_OBJECTS) $(sysdump_DEPENDENCIES)
	@rm -f sysdump$(EXEEXT)
	$(LINK) $(sysdump_LDFLAGS) $(sysdump_OBJECTS) $(sysdump_LDADD) $(LIBS)

coffdump$(EXEEXT): $(coffdump_OBJECTS) $(coffdump_DEPENDENCIES)
	@rm -f coffdump$(EXEEXT)
	$(LINK) $(coffdump_LDFLAGS) $(coffdump_OBJECTS) $(coffdump_LDADD) $(LIBS)

dlltool$(EXEEXT): $(dlltool_OBJECTS) $(dlltool_DEPENDENCIES)
	@rm -f dlltool$(EXEEXT)
	$(LINK) $(dlltool_LDFLAGS) $(dlltool_OBJECTS) $(dlltool_LDADD) $(LIBS)

windres$(EXEEXT): $(windres_OBJECTS) $(windres_DEPENDENCIES)
	@rm -f windres$(EXEEXT)
	$(LINK) $(windres_LDFLAGS) $(windres_OBJECTS) $(windres_LDADD) $(LIBS)

dllwrap$(EXEEXT): $(dllwrap_OBJECTS) $(dllwrap_DEPENDENCIES)
	@rm -f dllwrap$(EXEEXT)
	$(LINK) $(dllwrap_LDFLAGS) $(dllwrap_OBJECTS) $(dllwrap_LDADD) $(LIBS)

size$(EXEEXT): $(size_OBJECTS) $(size_DEPENDENCIES)
	@rm -f size$(EXEEXT)
	$(LINK) $(size_LDFLAGS) $(size_OBJECTS) $(size_LDADD) $(LIBS)

objdump$(EXEEXT): $(objdump_OBJECTS) $(objdump_DEPENDENCIES)
	@rm -f objdump$(EXEEXT)
	$(LINK) $(objdump_LDFLAGS) $(objdump_OBJECTS) $(objdump_LDADD) $(LIBS)

ar$(EXEEXT): $(ar_OBJECTS) $(ar_DEPENDENCIES)
	@rm -f ar$(EXEEXT)
	$(LINK) $(ar_LDFLAGS) $(ar_OBJECTS) $(ar_LDADD) $(LIBS)

strings$(EXEEXT): $(strings_OBJECTS) $(strings_DEPENDENCIES)
	@rm -f strings$(EXEEXT)
	$(LINK) $(strings_LDFLAGS) $(strings_OBJECTS) $(strings_LDADD) $(LIBS)

ranlib$(EXEEXT): $(ranlib_OBJECTS) $(ranlib_DEPENDENCIES)
	@rm -f ranlib$(EXEEXT)
	$(LINK) $(ranlib_LDFLAGS) $(ranlib_OBJECTS) $(ranlib_LDADD) $(LIBS)

c++filt$(EXEEXT): $(c__filt_OBJECTS) $(c__filt_DEPENDENCIES)
	@rm -f c++filt$(EXEEXT)
	$(LINK) $(c__filt_LDFLAGS) $(c__filt_OBJECTS) $(c__filt_LDADD) $(LIBS)

objcopy$(EXEEXT): $(objcopy_OBJECTS) $(objcopy_DEPENDENCIES)
	@rm -f objcopy$(EXEEXT)
	$(LINK) $(objcopy_LDFLAGS) $(objcopy_OBJECTS) $(objcopy_LDADD) $(LIBS)

addr2line$(EXEEXT): $(addr2line_OBJECTS) $(addr2line_DEPENDENCIES)
	@rm -f addr2line$(EXEEXT)
	$(LINK) $(addr2line_LDFLAGS) $(addr2line_OBJECTS) $(addr2line_LDADD) $(LIBS)

readelf$(EXEEXT): $(readelf_OBJECTS) $(readelf_DEPENDENCIES)
	@rm -f readelf$(EXEEXT)
	$(LINK) $(readelf_LDFLAGS) $(readelf_OBJECTS) $(readelf_LDADD) $(LIBS)

nm-new$(EXEEXT): $(nm_new_OBJECTS) $(nm_new_DEPENDENCIES)
	@rm -f nm-new$(EXEEXT)
	$(LINK) $(nm_new_LDFLAGS) $(nm_new_OBJECTS) $(nm_new_LDADD) $(LIBS)

strip-new$(EXEEXT): $(strip_new_OBJECTS) $(strip_new_DEPENDENCIES)
	@rm -f strip-new$(EXEEXT)
	$(LINK) $(strip_new_LDFLAGS) $(strip_new_OBJECTS) $(strip_new_LDADD) $(LIBS)
.l.c:
	$(SHELL) $(YLWRAP) "$(LEX)" $< $(LEX_OUTPUT_ROOT).c $@ -- $(AM_LFLAGS) $(LFLAGS)
.y.c:
	$(SHELL) $(YLWRAP) "$(YACC)" $< y.tab.c $*.c y.tab.h $*.h -- $(AM_YFLAGS) $(YFLAGS)
arparse.h: arparse.c
defparse.h: defparse.c
nlmheader.h: nlmheader.c
rcparse.h: rcparse.c


binutils.info: binutils.texi
binutils.dvi: binutils.texi


DVIPS = dvips

.texi.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texi.dvi:
	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.texi:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texinfo.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texinfo:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.texinfo.dvi:
	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.txi.info:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<

.txi.dvi:
	TEXINPUTS=$(top_srcdir)/../texinfo/texinfo.tex:$$TEXINPUTS \
	  MAKEINFO='$(MAKEINFO) -I $(srcdir)' $(TEXI2DVI) $<

.txi:
	@rm -f $@ $@-[0-9] $@-[0-9][0-9]
	$(MAKEINFO) -I $(srcdir) $<
.dvi.ps:
	$(DVIPS) $< -o $@

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(infodir)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  for ifile in `cd $$d && echo $$file $$file-[0-9] $$file-[0-9][0-9]`; do \
	    if test -f $$d/$$ifile; then \
	      echo " $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile"; \
	      $(INSTALL_DATA) $$d/$$ifile $(DESTDIR)$(infodir)/$$ifile; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    echo " install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file";\
	    install-info --info-dir=$(DESTDIR)$(infodir) $(DESTDIR)$(infodir)/$$file || :;\
	  done; \
	else : ; fi

uninstall-info:
	$(PRE_UNINSTALL)
	@if $(SHELL) -c 'install-info --version | sed 1q | fgrep -s -v -i debian' >/dev/null 2>&1; then \
	  ii=yes; \
	else ii=; fi; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  test -z "$ii" \
	    || install-info --info-dir=$(DESTDIR)$(infodir) --remove $$file; \
	done
	@$(NORMAL_UNINSTALL)
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  (cd $(DESTDIR)$(infodir) && rm -f $$file $$file-[0-9] $$file-[0-9][0-9]); \
	done

dist-info: $(INFO_DEPS)
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  for file in `cd $$d && eval echo $$base*`; do \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -f binutils.aux binutils.cp binutils.cps binutils.dvi binutils.fn \
	  binutils.fns binutils.ky binutils.kys binutils.ps \
	  binutils.log binutils.pg binutils.toc binutils.tp \
	  binutils.tps binutils.vr binutils.vrs binutils.op binutils.tr \
	  binutils.cv binutils.cn

clean-aminfo:

distclean-aminfo:

maintainer-clean-aminfo:
	for i in $(INFO_DEPS); do \
	  rm -f $$i; \
	  if test "`echo $$i-[0-9]*`" != "$$i-[0-9]*"; then \
	    rm -f $$i-[0-9]*; \
	  fi; \
	done
clean-info: mostlyclean-aminfo

install-man1:
	$(mkinstalldirs) $(DESTDIR)$(man1dir)
	@list='$(man1_MANS)'; \
	l2='$(man_MANS)'; for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst"; \
	  $(INSTALL_DATA) $$file $(DESTDIR)$(man1dir)/$$inst; \
	done

uninstall-man1:
	@list='$(man1_MANS)'; \
	l2='$(man_MANS)'; for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f $(DESTDIR)$(man1dir)/$$inst"; \
	  rm -f $(DESTDIR)$(man1dir)/$$inst; \
	done
install-man: $(MANS)
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) install-man1
uninstall-man:
	@$(NORMAL_UNINSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-man1

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" = "." && dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.in $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)config.in$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.in $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    cp -pr $$/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-info

RUNTESTFLAGS =

DEJATOOL = $(PACKAGE)

RUNTESTDEFAULTFLAGS = --tool $(DEJATOOL) --srcdir $$srcdir
site.exp: Makefile
	@echo 'Making a new site.exp file...'
	@test ! -f site.bak || rm -f site.bak
	@echo '## these variables are automatically generated by make ##' > $@-t
	@echo '# Do not edit here.  If you wish to override these values' >> $@-t
	@echo '# edit the last section' >> $@-t
	@echo 'set tool $(DEJATOOL)' >> $@-t
	@echo 'set srcdir $(srcdir)' >> $@-t
	@echo 'set objdir' `pwd` >> $@-t
	@echo 'set host_alias $(host_alias)' >> $@-t
	@echo 'set host_triplet $(host_triplet)' >> $@-t
	@echo 'set target_alias $(target_alias)' >> $@-t
	@echo 'set target_triplet $(target_triplet)' >> $@-t
	@echo 'set build_alias $(build_alias)' >> $@-t
	@echo 'set build_triplet $(build_triplet)' >> $@-t
	@echo '## All variables above are generated by configure. Do Not Edit ##' >> $@-t
	@test ! -f site.exp || sed '1,/^## All variables above are.*##/ d' site.exp >> $@-t
	@test ! -f site.exp || mv site.exp site.bak
	@mv $@-t site.exp
info-am: $(INFO_DEPS)
info: info-recursive
dvi-am: $(DVIS)
dvi: dvi-recursive
check-am:
	$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-info-am: 
install-info: install-info-recursive
all-recursive-am: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

install-exec-am: install-binPROGRAMS install-exec-local
install-exec: install-exec-recursive

install-data-am: install-man
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-binPROGRAMS uninstall-man
uninstall: uninstall-recursive
all-am: Makefile $(PROGRAMS) $(MANS) config.h
all-redirect: all-recursive-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(bindir) $(DESTDIR)$(mandir)/man1


mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	-test -z "arlexldeflexlrclexlarparseharparsecdefparsehdefparsecnlmheaderhnlmheadercrcparsehrcparsec$(MAINTAINERCLEANFILES)" || rm -f arlexl deflexl rclexl arparseh arparsec defparseh defparsec nlmheaderh nlmheaderc rcparseh rcparsec $(MAINTAINERCLEANFILES)
mostlyclean-am:  mostlyclean-hdr mostlyclean-binPROGRAMS \
		mostlyclean-noinstPROGRAMS mostlyclean-compile \
		mostlyclean-libtool mostlyclean-aminfo mostlyclean-tags \
		mostlyclean-generic mostlyclean-local

mostlyclean: mostlyclean-recursive

clean-am:  clean-hdr clean-binPROGRAMS clean-noinstPROGRAMS \
		clean-compile clean-libtool clean-aminfo clean-tags \
		clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-hdr distclean-binPROGRAMS \
		distclean-noinstPROGRAMS distclean-compile \
		distclean-libtool distclean-aminfo distclean-tags \
		distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-binPROGRAMS \
		maintainer-clean-noinstPROGRAMS \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-aminfo maintainer-clean-tags \
		maintainer-clean-generic distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
mostlyclean-noinstPROGRAMS distclean-noinstPROGRAMS \
clean-noinstPROGRAMS maintainer-clean-noinstPROGRAMS \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
clean-libtool maintainer-clean-libtool install-info-am uninstall-info \
mostlyclean-aminfo distclean-aminfo clean-aminfo \
maintainer-clean-aminfo install-man1 uninstall-man1 install-man \
uninstall-man install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir check-DEJAGNU \
info-am info dvi-am dvi check check-am installcheck-am installcheck \
install-info-am install-info all-recursive-am install-exec-local \
install-exec-am install-exec install-data-am install-data install-am \
install uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean

po/POTFILES.in: @MAINT@ Makefile
	for file in $(POTFILES); do echo $$file; done | sort > tmp \
	  && mv tmp $(srcdir)/po/POTFILES.in

check-DEJAGNU: site.exp
	srcdir=`cd $(srcdir) && pwd`; export srcdir; \
	r=`pwd`; export r; \
	EXPECT=$(EXPECT); export EXPECT; \
	if [ -f $(top_builddir)/../expect/expect ]; then \
	  TCL_LIBRARY=`cd $(top_srcdir)/../tcl/library && pwd`; \
	  export TCL_LIBRARY; \
	fi; \
	runtest=$(RUNTEST); \
	if $(SHELL) -c "$$runtest --version" > /dev/null 2>&1; then \
	  $$runtest --tool $(DEJATOOL) --srcdir $${srcdir}/testsuite \
		CC_FOR_TARGET="$(CC_FOR_TARGET)" \
		CFLAGS_FOR_TARGET="$(CFLAGS)" $(RUNTESTFLAGS); \
	else echo "WARNING: could not find \`runtest'" 1>&2; :;\
	fi

installcheck:
	/bin/sh $(srcdir)/sanity.sh $(bindir)

underscore.c: stamp-under ; @true

stamp-under: Makefile
	echo '/*WARNING: This file is automatically generated!*/' >underscore.t
	echo "int prepends_underscore = @UNDERSCORE@;" >>underscore.t
	$(SHELL) $(srcdir)/../move-if-change underscore.t underscore.c
	touch stamp-under

cplus-dem.o: $(BASEDIR)/libiberty/cplus-dem.c $(INCDIR)/getopt.h
	$(COMPILE) -c -DMAIN -DVERSION='"$(VERSION)"' $(BASEDIR)/libiberty/cplus-dem.c

# The following is commented out for the convertion to automake.
# This rule creates a single binary that switches between ar and ranlib
# by looking at argv[0].  Use this kludge to save some disk space.
# However, you have to install things by hand.
# (That is after 'make install', replace the installed ranlib by a link to ar.)
# Alternatively, you can install ranlib.sh as ranlib.
# ar_with_ranlib: $(ADDL_DEPS) ar.o maybe-ranlib.o
#	$(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(AR_PROG) ar.o maybe-ranlib.o $(ADDL_LIBS) $(EXTRALIBS)
#	-rm -f $(RANLIB_PROG)
#	-ln $(AR_PROG) $(RANLIB_PROG)
#
# objcopy and strip in one binary that uses argv[0] to decide its action.
#
#objcopy_with_strip: $(ADDL_DEPS) objcopy.o maybe-strip.o
#	$(HLDENV) $(CC) $(HLDFLAGS) $(CFLAGS) $(LDFLAGS) -o $(OBJCOPY_PROG) objcopy.o maybe-strip.o $(ADDL_LIBS) $(EXTRALIBS)
#	-rm -f $(STRIP_PROG)
#	-ln $(OBJCOPY_PROG) $(STRIP_PROG)

sysroff.c: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info 
	./sysinfo$(EXEEXT_FOR_BUILD) -c <$(srcdir)/sysroff.info >sysroff.c
	./sysinfo$(EXEEXT_FOR_BUILD) -i <$(srcdir)/sysroff.info >>sysroff.c
	./sysinfo$(EXEEXT_FOR_BUILD) -g <$(srcdir)/sysroff.info >>sysroff.c

sysroff.h: sysinfo$(EXEEXT_FOR_BUILD) sysroff.info
	./sysinfo$(EXEEXT_FOR_BUILD) -d <$(srcdir)/sysroff.info >sysroff.h

sysinfo$(EXEEXT_FOR_BUILD): sysinfo.o syslex.o
	$(CC_FOR_BUILD) $(CFLAGS) $(LDFLAGS) -o $@ sysinfo.o syslex.o 

syslex.o: syslex.c sysinfo.h
	if [ -r syslex.c ]; then \
	  $(CC_FOR_BUILD) -c -I. $(CFLAGS)  syslex.c  ; \
	else \
	  $(CC_FOR_BUILD) -c -I. -I$(srcdir) $(CFLAGS) $(srcdir)/syslex.c ;\
	fi

sysinfo.o: sysinfo.c
	if [ -r sysinfo.c ]; then \
	  $(CC_FOR_BUILD) -c -I. $(CFLAGS)  sysinfo.c  ; \
	else \
	  $(CC_FOR_BUILD) -c -I. $(CFLAGS) $(srcdir)/sysinfo.c ; \
	fi

dlltool.o:dlltool.c
	$(COMPILE) -c $(DLLTOOL_DEFS) $(srcdir)/dlltool.c

# coff/sym.h and coff/ecoff.h won't be found by the automatic dependency
# scripts, since they are only included conditionally.
nlmconv.o: nlmconv.c $(INCDIR)/coff/sym.h $(INCDIR)/coff/ecoff.h
	ldname=`echo ld | sed '$(transform)'`; \
	$(COMPILE) -c -DLD_NAME="\"$${ldname}\"" @NLMCONV_DEFS@ $(srcdir)/nlmconv.c


diststuff: $(DISTSTUFF) info

# Targets to rebuild dependencies in this Makefile.
# Have to get rid of .dep1 here so that "$?" later includes all of $(CFILES).
.dep: dep.sed $(CFILES) $(HFILES) $(GENERATED_CFILES) $(GENERATED_HFILES) config.h
	rm -f .dep1
	$(MAKE) DEP=$(DEP) .dep1
	sed -f dep.sed <.dep1 >.dep

# This rule really wants a mkdep that runs "gcc -MM".
.dep1: $(CFILES) $(GENERATED_CFILES)
	rm -f .dep2
	echo '# DO NOT DELETE THIS LINE -- mkdep uses it.' > .dep2
	$(DEP) -f .dep2 $(INCLUDES) $?
	$(SHELL) $(srcdir)/../move-if-change .dep2 .dep1

dep.sed: dep-in.sed config.status
	objdir=`pwd`; \
	sed <$(srcdir)/dep-in.sed >dep.sed	\
		-e 's!@INCDIR@!$(INCDIR)!'	\
		-e 's!@BFDDIR@!$(BFDDIR)!'	\
		-e 's!@SRCDIR@!$(srcdir)!'	\
		-e "s!@OBJDIR@!$${objdir}!"

dep: .dep
	sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < Makefile > tmp-Makefile
	cat .dep >> tmp-Makefile
	$(SHELL) $(srcdir)/../move-if-change tmp-Makefile Makefile

dep-in: .dep
	sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.in > tmp-Makefile.in
	cat .dep >> tmp-Makefile.in
	$(SHELL) $(srcdir)/../move-if-change tmp-Makefile.in $(srcdir)/Makefile.in

dep-am: .dep
	sed -e '/^..DO NOT DELETE THIS LINE/,$$d' < $(srcdir)/Makefile.am > tmp-Makefile.am
	cat .dep >> tmp-Makefile.am
	$(SHELL) $(srcdir)/../move-if-change tmp-Makefile.am $(srcdir)/Makefile.am

.PHONY: dep dep-in dep-am

###
# DOCUMENTATION TARGETS
config.texi: Makefile
	rm -f config.texi
	echo '@set VERSION $(VERSION)' > config.texi

binutils.dvi: $(srcdir)/binutils.texi config.texi

binutils.info: $(srcdir)/binutils.texi config.texi

$(DEMANGLER_PROG).1: cxxfilt.man Makefile
	sed -e 's/@PROGRAM@/$(DEMANGLER_PROG)/' < $(srcdir)/cxxfilt.man \
		> $(DEMANGLER_PROG).1
mostlyclean-local:
	-rm -rf tmpdir

.PHONY: install-exec-local

install-exec-local: $(bin_PROGRAMS) $(noinst_PROGRAMS)
	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
	  if test -f $$p; then \
	    echo " $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed -e 's/$(EXEEXT)$$//' -e 's/-new//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \
	    $(LIBTOOL)  --mode=install $(INSTALL_PROGRAM) $$p $(bindir)/`echo $$p|sed -e 's/$(EXEEXT)$$//' -e 's/-new//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \
	  else :; fi; \
	done
	$(mkinstalldirs) $(tooldir)/bin
	for i in $(TOOL_PROGS); do \
	  if [ -f $$i$(EXEEXT) ]; then \
	    j=`echo $$i | sed -e 's/-new//'`; \
	    k=`echo $$j | sed '$(transform)'`; \
	    if [ "$(bindir)/$$k$(EXEEXT)" != "$(tooldir)/bin/$$j$(EXEEXT)" ]; then \
	      rm -f $(tooldir)/bin/$$j$(EXEEXT); \
	      ln $(bindir)/$$k$(EXEEXT) $(tooldir)/bin/$$j$(EXEEXT) >/dev/null 2>/dev/null \
		|| $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$i$(EXEEXT) $(tooldir)/bin/$$j$(EXEEXT); \
	    fi; \
	  else true; \
	  fi; \
	done

# What appears below is generated by a hacked mkdep using gcc -MM.

# DO NOT DELETE THIS LINE -- mkdep uses it.
# DO NOT PUT ANYTHING AFTER THIS LINE, IT WILL GO AWAY.

addr2line.o: addr2line.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  $(INCDIR)/getopt.h $(INCDIR)/libiberty.h $(INCDIR)/demangle.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h
ar.o: ar.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/libiberty.h \
  $(INCDIR)/progress.h bucomm.h config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/aout/ar.h $(BFDDIR)/libbfd.h arsup.h
arsup.o: arsup.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  arsup.h $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/fopen-same.h
bucomm.o: bucomm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/fopen-same.h
coffdump.o: coffdump.c coffgrok.h bucomm.h config.h \
  $(INCDIR)/fopen-same.h
coffgrok.o: coffgrok.c bucomm.h config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/coff/internal.h $(BFDDIR)/libcoff.h $(INCDIR)/bfdlink.h \
  coffgrok.h
debug.o: debug.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  debug.h
dlltool.o: dlltool.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/getopt.h $(INCDIR)/demangle.h dlltool.h
filemode.o: filemode.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h
ieee.o: ieee.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/ieee.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  debug.h budbg.h
is-ranlib.o: is-ranlib.c
is-strip.o: is-strip.c
maybe-ranlib.o: maybe-ranlib.c
maybe-strip.o: maybe-strip.c
nlmconv.o: nlmconv.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/fopen-same.h \
  $(BFDDIR)/libnlm.h $(INCDIR)/nlm/common.h $(INCDIR)/nlm/internal.h \
  $(INCDIR)/nlm/external.h nlmconv.h
nm.o: nm.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/progress.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/getopt.h \
  $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def $(INCDIR)/aout/ranlib.h \
  $(INCDIR)/demangle.h $(INCDIR)/libiberty.h
not-ranlib.o: not-ranlib.c
not-strip.o: not-strip.c
objcopy.o: objcopy.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  $(INCDIR)/progress.h bucomm.h config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/getopt.h $(INCDIR)/libiberty.h budbg.h
objdump.o: objdump.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  $(INCDIR)/getopt.h $(INCDIR)/progress.h bucomm.h config.h \
  $(INCDIR)/fopen-same.h $(INCDIR)/dis-asm.h $(INCDIR)/libiberty.h \
  $(INCDIR)/demangle.h debug.h budbg.h $(INCDIR)/aout/aout64.h
prdbg.o: prdbg.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  debug.h budbg.h
rdcoff.o: rdcoff.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  $(INCDIR)/coff/internal.h bucomm.h config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/libiberty.h $(INCDIR)/demangle.h debug.h \
  budbg.h $(BFDDIR)/libcoff.h $(INCDIR)/bfdlink.h
rddbg.o: rddbg.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  debug.h budbg.h
size.o: size.c ../bfd/bfd.h $(INCDIR)/ansidecl.h $(INCDIR)/getopt.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h
srconv.o: srconv.c bucomm.h config.h $(INCDIR)/fopen-same.h \
  sysroff.h coffgrok.h $(INCDIR)/coff/internal.h $(BFDDIR)/libcoff.h \
  $(INCDIR)/bfdlink.h sysroff.c
stabs.o: stabs.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  $(INCDIR)/demangle.h debug.h budbg.h $(INCDIR)/aout/aout64.h \
  $(INCDIR)/aout/stab_gnu.h $(INCDIR)/aout/stab.def
strings.o: strings.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h
sysdump.o: sysdump.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h sysroff.h \
  sysroff.c
version.o: version.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h
wrstabs.o: wrstabs.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  debug.h budbg.h $(INCDIR)/aout/aout64.h $(INCDIR)/aout/stab_gnu.h \
  $(INCDIR)/aout/stab.def
windres.o: windres.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  $(INCDIR)/getopt.h bucomm.h config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/libiberty.h $(INCDIR)/obstack.h windres.h \
  winduni.h
resrc.o: resrc.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  windres.h winduni.h
rescoff.o: rescoff.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  windres.h winduni.h $(INCDIR)/coff/internal.h $(BFDDIR)/libcoff.h \
  $(INCDIR)/bfdlink.h
resbin.o: resbin.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  windres.h winduni.h
winduni.o: winduni.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h winduni.h
readelf.o: readelf.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  $(INCDIR)/elf/common.h $(INCDIR)/elf/external.h $(INCDIR)/elf/internal.h \
  $(INCDIR)/elf/dwarf2.h $(INCDIR)/elf/i386.h $(INCDIR)/elf/reloc-macros.h \
  $(INCDIR)/elf/v850.h $(INCDIR)/elf/ppc.h $(INCDIR)/elf/mips.h \
  $(INCDIR)/elf/alpha.h $(INCDIR)/elf/arm.h $(INCDIR)/elf/m68k.h \
  $(INCDIR)/elf/sparc.h $(INCDIR)/elf/m32r.h $(INCDIR)/elf/d10v.h \
  $(INCDIR)/elf/d30v.h $(INCDIR)/elf/sh.h $(INCDIR)/elf/mn10200.h \
  $(INCDIR)/elf/mn10300.h $(INCDIR)/elf/hppa.h $(INCDIR)/elf/arc.h \
  $(INCDIR)/elf/fr30.h bucomm.h config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/getopt.h
resres.o: resres.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  windres.h winduni.h
dyn-string.o: dyn-string.c config.h $(INCDIR)/ansidecl.h \
  dyn-string.h
dllwrap.o: dllwrap.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  $(INCDIR)/libiberty.h bucomm.h config.h $(INCDIR)/fopen-same.h \
  $(INCDIR)/getopt.h dyn-string.h
rename.o: rename.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h
underscore.o: underscore.c
arparse.o: arparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h arsup.h
arlex.o: arlex.c $(INCDIR)/libiberty.h arparse.h
sysroff.o: sysroff.c
sysinfo.o: sysinfo.c
syslex.o: syslex.c sysinfo.h
defparse.o: defparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h dlltool.h
deflex.o: deflex.c $(INCDIR)/libiberty.h $(INCDIR)/ansidecl.h \
  defparse.h dlltool.h
nlmheader.o: nlmheader.c ../bfd/bfd.h bucomm.h config.h \
  $(INCDIR)/fopen-same.h $(INCDIR)/nlm/common.h $(INCDIR)/nlm/internal.h \
  nlmconv.h
rcparse.o: rcparse.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  windres.h winduni.h
rclex.o: rclex.c ../bfd/bfd.h $(INCDIR)/ansidecl.h \
  bucomm.h config.h $(INCDIR)/fopen-same.h $(INCDIR)/libiberty.h \
  windres.h winduni.h rcparse.h

# IF YOU PUT ANYTHING HERE IT WILL GO AWAY

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: