| # Copyright 1998-2020 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 3 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program. If not, see <http://www.gnu.org/licenses/>. */ |
| |
| |
| standard_testfile average.c sum.c |
| |
| if {[build_executable $testfile.exp $testfile \ |
| [list $srcfile $srcfile2] debug] == -1} { |
| untested "failed to compile" |
| return -1 |
| } |
| |
| # |
| # start gdb -- start gdb running, default procedure |
| # |
| proc dbx_gdb_start { } { |
| global verbose |
| global GDB |
| global INTERNAL_GDBFLAGS GDBFLAGS |
| global prompt |
| global spawn_id |
| global timeout |
| verbose "Spawning $GDB -dbx $INTERNAL_GDBFLAGS $GDBFLAGS" |
| |
| if { [which $GDB] == 0 } then { |
| perror "$GDB does not exist." |
| exit 1 |
| } |
| |
| set oldtimeout $timeout |
| set timeout [expr "$timeout + 60"] |
| eval "spawn $GDB -dbx $INTERNAL_GDBFLAGS $GDBFLAGS" |
| gdb_expect { |
| -re ".*\r\n$gdb_prompt $" { |
| verbose "GDB initialized." |
| } |
| -re "$prompt $" { |
| perror "GDB never initialized." |
| return -1 |
| } |
| timeout { |
| perror "(timeout) GDB never initialized." |
| return -1 |
| } |
| } |
| set timeout $oldtimeout |
| # force the height to "unlimited", so no pagers get used |
| send_gdb "set height 0\n" |
| gdb_expect { |
| -re ".*$prompt $" { |
| verbose "Setting height to 0." 2 |
| } |
| timeout { |
| warning "Couldn't set the height to 0." |
| } |
| } |
| # force the width to "unlimited", so no wraparound occurs |
| send_gdb "set width 0\n" |
| gdb_expect { |
| -re ".*$prompt $" { |
| verbose "Setting width to 0." 2 |
| } |
| timeout { |
| warning "Couldn't set the width to 0." |
| } |
| } |
| } |
| |
| |
| proc dbx_reinitialize_dir { subdir } { |
| global gdb_prompt |
| |
| send_gdb "use\n" |
| gdb_expect { |
| -re "Reinitialize source path to empty.*y or n. " { |
| send_gdb "y\n" |
| gdb_expect { |
| -re "Source directories searched.*$gdb_prompt $" { |
| send_gdb "use $subdir\n" |
| gdb_expect { |
| -re "Source directories searched.*$gdb_prompt $" { |
| verbose "Dir set to $subdir" |
| } |
| -re ".*$gdb_prompt $" { |
| perror "Dir \"$subdir\" failed." |
| } |
| } |
| } |
| -re ".*$gdb_prompt $" { |
| perror "Dir \"$subdir\" failed." |
| } |
| } |
| } |
| -re ".*$gdb_prompt $" { |
| perror "Dir \"$subdir\" failed." |
| } |
| } |
| } |
| |
| # In "testsuite/config/unix-gdb.exp", the routine "gdb_load" |
| # is defined as "gdb_file_cmd". The binding of "gdb_file_cmd" |
| # is done at invocation time. Before this file is processed, |
| # it binds to the definition in "testsuite/lib/gdb.exp"; after |
| # this file is processed, it binds to this definition. |
| # TCL lets us overrides a previous routine definition without a |
| # warning (isn't that special?). |
| # |
| # This means that tests before use "file" to load a target, and |
| # tests afterwards use the pair "symbol-file" "exec-file". |
| # |
| # I'm leaving it as it is for now because at the moment it |
| # is the only test we have of the use of the combination of |
| # "symbol-file" and "exec-file" to load a debugging target (the |
| # other definition uses "file". |
| # |
| # Symbol-file and exec-file should be tested explicitly, not |
| # as a side effect of running a particular test (in this case, |
| # "testsuite/gdb.compat/dbx.exp"). |
| # |
| # CM: Renamed the procedure so it does not override the orginal file name. |
| # Having the test suite change behavior depending on the tests run makes |
| # it extremely difficult to reproduce errors. I've also added a |
| # "dbx_gdb_load" procedure. This and only this test will call these |
| # procedures now. I also added an "expect" to the "send exec-file" line. |
| # The "expect" waits for a prompt to appear. Otherwise, if the tests run |
| # too quickly, the caller could send another command before the prompt |
| # of this command returns, causing the test to get out of sync and fail |
| # seemingly randomly or only on a loaded system. |
| # |
| # Problem is, though, that the testsuite config files can override the definition of |
| # gdb_load (without notice, as was mentioned above). Unfortunately, the gdb_load proc |
| # that was copied into this test was a copy of the unix native version. |
| # |
| # The real problem that we're attempting to solve is how to load an exec and symbol |
| # file into gdb for a dbx session. So why not just override gdb_file_cmd with the |
| # right sequence of events, allowing gdb_load to do its normal thing? This way |
| # remotes and simulators will work, too. |
| # |
| # [drow 2002-03-30]: We can restore the old gdb_file_cmd afterwards, though. |
| set old_gdb_file_cmd_args [info args gdb_file_cmd] |
| set old_gdb_file_cmd_body [info body gdb_file_cmd] |
| |
| proc gdb_file_cmd {arg} { |
| global verbose |
| global loadpath |
| global loadfile |
| global GDB |
| global gdb_prompt |
| global spawn_id |
| upvar timeout timeout |
| global last_loaded_file |
| |
| set last_loaded_file $arg |
| |
| if [is_remote host] { |
| set arg [remote_download host $arg] |
| if { $arg == "" } { |
| error "download failed" |
| return -1 |
| } |
| } |
| |
| send_gdb "symbol-file $arg\n" |
| gdb_expect { |
| -re "Reading symbols from.*$gdb_prompt $" { |
| verbose "\t\tLoaded $arg into the $GDB" |
| send_gdb "exec-file $arg\n" |
| gdb_expect { |
| -re "A program is being debugged already.*Kill it.*y or n. $" { |
| send_gdb "y\n" |
| verbose "\t\tKilling previous program being debugged" |
| exp_continue |
| } |
| -re ".*$gdb_prompt $" { |
| verbose "\t\tLoaded $arg with new symbol table into $GDB" |
| return 0 |
| } |
| timeout { |
| perror "(timeout) Couldn't load $arg" |
| return -1 |
| } |
| } |
| return 0 |
| } |
| -re "has no symbol-table.*$gdb_prompt $" { |
| perror "$arg wasn't compiled with \"-g\"" |
| return -1 |
| } |
| -re "Load new symbol table from \".*\".*y or n. $" { |
| send_gdb "y\n" |
| exp_continue |
| } |
| -re ".*No such file or directory.*$gdb_prompt $" { |
| perror "($arg) No such file or directory\n" |
| return -1 |
| } |
| -re "$gdb_prompt $" { |
| perror "couldn't load $arg into $GDB." |
| return -1 |
| } |
| timeout { |
| perror "couldn't load $arg into $GDB (timed out)." |
| return -1 |
| } |
| eof { |
| # This is an attempt to detect a core dump, but seems not to |
| # work. Perhaps we need to match .* followed by eof, in which |
| # expect does not seem to have a way to do that. |
| perror "couldn't load $arg into $GDB (end of file)." |
| return -1 |
| } |
| } |
| } |
| |
| # |
| #test_breakpoints |
| # |
| proc test_breakpoints { } { |
| set stop_line [gdb_get_line_number "stop-in-main"] |
| gdb_test "stop in main" "Breakpoint.*at.*: file.*average\.c, line $stop_line\." |
| gdb_test "status" "Num.*Type.*Disp.*Enb.*Address.*What\r\n1\[ \r\]+breakpoint\[ \r\]+keep y.*in main at.*average\.c:$stop_line.*" |
| set stop_line [gdb_get_line_number "stop-at-call"] |
| gdb_test "stop at average.c:$stop_line" "Breakpoint.*at.*: file.*average\.c, line $stop_line.*" |
| gdb_test "stop in average.c:$stop_line" "Usage: stop in <function . address>" |
| gdb_test "stop at main" "Usage: stop at LINE" |
| } |
| |
| # |
| #test_assign |
| # |
| proc test_assign { } { |
| global decimal |
| global gdb_prompt |
| |
| gdb_run_cmd |
| set test "running to main" |
| gdb_test_multiple "" $test { |
| -re "Break.* at .*:$decimal.*$gdb_prompt $" { |
| pass $test |
| } |
| -re "Breakpoint \[0-9\]*, \[0-9xa-f\]* in .*$gdb_prompt $" { |
| pass $test |
| } |
| } |
| send_gdb "assign first=1\n" |
| gdb_expect { |
| -re "No symbol \"first\" in current context.*$" { fail "assign first" } |
| -re "$gdb_prompt $" { pass "assign first" } |
| timeout { fail "assign first (timeout)" } |
| } |
| gdb_test "print first" ".1 = 1" |
| } |
| |
| # |
| #test_whereis |
| # |
| proc test_whereis { } { |
| gdb_test "whereis my_list" "All variables matching regular expression \"my_list\":\r\n\r\nFile.*average\.c:\r\n.*\tstatic int my_list\\\[10\\\];" |
| } |
| |
| # |
| #test_func |
| # |
| proc test_func { } { |
| global decimal |
| global srcfile2 |
| gdb_test "cont" ".*" "cont 1" |
| gdb_test "step" ".*" |
| gdb_test "func sum" "'sum' not within current stack frame\." |
| set stop_line [gdb_get_line_number "stop-in-sum" $srcfile2] |
| gdb_test "stop in sum" "Breakpoint.*at.*: file.*sum\.c, line $stop_line\." |
| gdb_test "cont" ".*" "cont 2" |
| gdb_test "func print_average" ".*in print_average.*\\(list=.*, low=0, high=6\\).*at.*average\.c:${decimal}\r\n${decimal}\[ \t\]+total = sum\\(list, low, high\\);" |
| } |
| |
| # Start with a fresh gdb. |
| |
| gdb_exit |
| global GDBFLAGS |
| set saved_gdbflags $GDBFLAGS |
| |
| set GDBFLAGS "$GDBFLAGS --dbx" |
| gdb_start |
| dbx_reinitialize_dir $srcdir/$subdir |
| gdb_load ${binfile} |
| |
| test_breakpoints |
| test_assign |
| test_whereis |
| gdb_test "file average.c:1" "1\[ \t\]+/. This is a sample program.*" |
| test_func |
| |
| #exit and cleanup |
| gdb_exit |
| |
| set GDBFLAGS $saved_gdbflags |
| eval proc gdb_file_cmd {$old_gdb_file_cmd_args} {$old_gdb_file_cmd_body} |
| |
| return 0 |
