| # Copyright (C) 1995, 1997 Free Software Foundation, Inc. |
| |
| # This program is free software; you can redistribute it and/or modify |
| # it under the terms of the GNU General Public License as published by |
| # the Free Software Foundation; either version 2 of the License, or |
| # (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| |
| # Please email any bugs, comments, and/or additions to this file to: |
| # bug-gdb@prep.ai.mit.edu |
| |
| # This file tests various Chill values, expressions, and types. |
| |
| if $tracelevel then { |
| strace $tracelevel |
| } |
| |
| if [skip_chill_tests] then { continue } |
| |
| set testfile "tests1" |
| set srcfile ${srcdir}/$subdir/${testfile}.ch |
| set binfile ${objdir}/${subdir}/${testfile}.exe |
| if { [compile "${srcfile} -g -w -o ${binfile} ${CHILL_RT0} ${CHILL_LIB}"] != "" } { |
| perror "Couldn't compile ${srcfile}" |
| return -1 |
| } |
| |
| # Set the current language to chill. This counts as a test. If it |
| # fails, then we skip the other tests. |
| |
| proc set_lang_chill {} { |
| global gdb_prompt |
| global binfile objdir subdir |
| |
| verbose "loading file '$binfile'" |
| gdb_load $binfile |
| send_gdb "set language chill\n" |
| gdb_expect { |
| -re ".*$gdb_prompt $" {} |
| timeout { fail "set language chill (timeout)" ; return 0 } |
| } |
| |
| send_gdb "show language\n" |
| gdb_expect { |
| -re ".* source language is \"chill\".*$gdb_prompt $" { |
| pass "set language to \"chill\"" |
| send_gdb "break dummyfunc\n" |
| gdb_expect { |
| -re ".*$gdb_prompt $" { |
| send_gdb "run\n" |
| gdb_expect -re ".*$gdb_prompt $" {} |
| return 1 |
| } |
| timeout { |
| fail "can't set breakpoint (timeout)" |
| return 0 |
| } |
| } |
| } |
| -re ".*$gdb_prompt $" { |
| fail "setting language to \"chill\"" |
| return 0 |
| } |
| timeout { |
| fail "can't show language (timeout)" |
| return 0 |
| } |
| } |
| } |
| |
| # Testing printing of a specific value. Increment passcount for |
| # success or issue fail message for failure. In both cases, return |
| # a 1 to indicate that more tests can proceed. However a timeout |
| # is a serious error, generates a special fail message, and causes |
| # a 0 to be returned to indicate that more tests are likely to fail |
| # as well. |
| # |
| # Args are: |
| # |
| # First one is string to send_gdb to gdb |
| # Second one is string to match gdb result to |
| # Third one is an optional message to be printed |
| |
| proc test_print_accept { args } { |
| global gdb_prompt |
| global passcount |
| global verbose |
| |
| if [llength $args]==3 then { |
| set message [lindex $args 2] |
| } else { |
| set message [lindex $args 0] |
| } |
| set sendthis [lindex $args 0] |
| set expectthis [lindex $args 1] |
| set result [gdb_test $sendthis ".* = ${expectthis}" $message] |
| if $result==0 {incr passcount} |
| return $result |
| } |
| |
| # Testing printing of a specific value. Increment passcount for |
| # success or issue fail message for failure. In both cases, return |
| # a 1 to indicate that more tests can proceed. However a timeout |
| # is a serious error, generates a special fail message, and causes |
| # a 0 to be returned to indicate that more tests are likely to fail |
| # as well. |
| |
| # various tests if modes are treated correctly |
| # using ptype |
| proc test_modes {} { |
| global passcount |
| |
| verbose "testing chill modes" |
| set passcount 0 |
| |
| # discrete modes |
| test_print_accept "ptype BYTE" "byte" |
| test_print_accept "ptype UBYTE" "ubyte" |
| test_print_accept "ptype INT" "int" |
| test_print_accept "ptype UINT" "uint" |
| test_print_accept "ptype LONG" "long" |
| test_print_accept "ptype ULONG" "ulong" |
| test_print_accept "ptype BOOL" "bool" |
| test_print_accept "ptype CHAR" "char" |
| |
| test_print_accept "ptype set1" "SET \[(\]aaa, bbb, ccc\[)\]" \ |
| "print unnumbered set mode" |
| test_print_accept "ptype nset1" "SET \[(\]na = 1, nb = 34, nc = 20\[)\]" \ |
| "print numbered set mode" |
| |
| # mp: |
| # display maybe in hex values ? |
| # |
| test_print_accept "ptype r11" "ubyte \\(0:255\\)" \ |
| "print ubyte range mode" |
| test_print_accept "ptype r12" "uint \\(0:65535\\)" \ |
| "print uint range mode" |
| # test_print_accept "ptype r13" "ulong \\(0:4294967295\\)" \ |
| # "print ulong range mode" |
| test_print_accept "ptype r14" "byte \\(-128:127\\)" \ |
| "print byte range mode" |
| test_print_accept "ptype r15" "int \\(-32768:32767\\)" \ |
| "print int range mode" |
| test_print_accept "ptype r16" "long \\(-2147483648:2147483647\\)" \ |
| "print long range mode" |
| |
| test_print_accept "ptype r2" "set1 \\(bbb:ccc\\)" \ |
| "print unnumbered set range mode" |
| test_print_accept "ptype r3" "nset1 \\(na:na\\)" \ |
| "print numbered set range mode" |
| # really this order ? |
| # I'm not sure what should happen for the next two tests. |
| setup_xfail "*-*-*" |
| test_print_accept "ptype r4" "nset1 \\(nb = 34:nc = 20\\)" \ |
| "print numbered set range mode" |
| setup_xfail "*-*-*" |
| test_print_accept "ptype r5" "nset1 \\(na = 1, nb = 34, nc = 20\\)" \ |
| "print numbered set range mode" |
| |
| # powerset modes |
| test_print_accept "ptype pm1" \ |
| "POWERSET SET \[(\]p1, p2, p3, p4, p5, p6, p7, p8, p9, p10\[)\]" \ |
| "print powerset mode 1" |
| test_print_accept "ptype pm2" "POWERSET byte \\(1:8\\)" \ |
| "print powerset mode 2" |
| test_print_accept "ptype pm3" "POWERSET int \\(-32768:32767\\)" \ |
| "print powerset mode 3" |
| test_print_accept "ptype pm4" "POWERSET long \\(-32768:32768\\)" \ |
| "print powerset mode 4" |
| test_print_accept "ptype pm5" \ |
| "POWERSET long \\(-2147483648:2147483647\\)" \ |
| "print powerset mode 5" |
| |
| # reference modes |
| test_print_accept "ptype ref1" "REF pm1" \ |
| "print reference to powerset mode" |
| test_print_accept "ptype ref2" "REF byte" \ |
| "print reference to byte" |
| test_print_accept "ptype ref3" "PTR" \ |
| "print free reference type" |
| |
| # procedure modes |
| # FIXME: we have to talk about this ... |
| test_print_accept "ptype prm1" \ |
| "REF PROC \[(\]\[)\]" \ |
| "print procedure mode 1" |
| setup_xfail "*-*-*" |
| test_print_accept "ptype prm2" \ |
| "REF PROC \[(\]bool in, int out long inout\[)\] RETURNS \[(\]char\[)\]" \ |
| "print procedure mode 2" |
| setup_xfail "*-*-*" |
| test_print_accept "ptype prm3" \ |
| "REF PROC \[(\]pm1, ref loc\[)\] RETURNS \[(\]ref3\[)\]" \ |
| "print procedure mode 3" |
| setup_xfail "*-*-*" |
| test_print_accept "ptype prm4" \ |
| "\[(\] \[)\] EXCEPTIONS \[(\]ex1, ex2, ex3\[)\]" \ |
| "print procedure mode 4" |
| setup_xfail "*-*-*" |
| test_print_accept "ptype prm5" \ |
| "REF PROC \[(\]r11, r16 inout, r5 out\[)\] RETURNS \[(\]r2\[)\] EXCEPTIONS \[(\]ex1\[)\]" \ |
| "print procedure mode 5" |
| |
| # synchronization modes |
| # FIXME: since gdb doesn't process events & buffers so far, this has be |
| # filled later... |
| xfail "synchronization mode handling" |
| |
| # timing modes |
| test_print_accept "ptype DURATION" "duration" |
| test_print_accept "ptype TIME" "time" |
| |
| # string modes |
| # some tests are done in chillvars.exp |
| test_print_accept "ptype strm1" "CHARS \\(5\\)" "print char string mode" |
| test_print_accept "ptype strm2" "CHARS \[(\]7\[)\] VARYING" \ |
| "print varying char string mode" |
| test_print_accept "ptype bstr1" "BOOLS \\(20\\)" "print bit string mode" |
| |
| test_print_accept "ptype B'000'" "BOOLS \\(3\\)" "bit string literal" |
| test_print_accept "ptype B'11110000'" "BOOLS \\(8\\)" "bit string literal" |
| # FIXME: adjust error message |
| gdb_test "ptype B'00110211'" {.*Too-large digit.*[.]} \ |
| "reject invalid bitstring" |
| |
| # array modes |
| # some tests are done in chillvars.exp |
| test_print_accept "ptype arr1m" "ARRAY \\(1:100\\) set1" \ |
| "print array mode 1" |
| test_print_accept "ptype arr2m" "ARRAY \\(1:100\\) ARRAY \\(1:100\\) set1"\ |
| "print array mode 2" |
| test_print_accept "ptype arr3m" "ARRAY \\(0:255\\) ARRAY \\(0:65535\\) ARRAY \\(-128:127\\) set1" \ |
| "print array mode 3" |
| setup_xfail "*-*-*" |
| test_print_accept "ptype arr4m" "ARRAY \\(b:c\\) ARRAY \\(na = 1:na = 1\\) ARRAY \\(nc:nb\\) ARRAY \\(na = 1:nc = 20\\) POWERSET SET \[(\]p1, p2, p3, p4, p5, p6, p7, p8, p9, p10\[)\]" \ |
| "print array mode 4" |
| |
| # structure modes |
| # some checks are in chillvars.exp |
| # setup_xfail "*-*-*" |
| test_print_accept "ptype stru1m" "STRUCT \\(.*a long,.*b long,.*CASE OF.*:.*ch1 CHARS \\(20\\).*:.*ch2 CHARS \\(10\\).*ELSE.*ch3 CHARS \\(1\\).*ESAC.*\\)" \ |
| "print structure mode 1" |
| #setup_xfail "*-*-*" |
| test_print_accept "ptype stru2m" "STRUCT \\(.*f set1,.*CASE OF.*:.*ch1 CHARS \\(20\\).*:.*ch2 CHARS \\(10\\) VARYING.*ELSE.*ch3 CHARS \\(0\\) VARYING.*ESAC.*\\)" \ |
| "print structure mode 2" |
| #setup_xfail "*-*-*" |
| test_print_accept "ptype stru3m" "STRUCT \\(.*f r3,.*CASE OF.*:.*ch1 CHARS \\(20\\).*ESAC.*\\)" \ |
| "print structure mode 3" |
| # setup_xfail "*-*-*" |
| test_print_accept "ptype stru4m" "STRUCT \\(.*i long,.*CASE OF.*:.*i1 int,.*i11 int,.*b1 bool,.*c1 char.*:.*i2 long,.*i22 long,.*bs2 BOOLS \\(10\\).*:.*s3 STRUCT \\(.*i3 int,.*CASE OF.*:.*foo long.*ELSE.*bar char.*ESAC.*\\).*ELSE.*x stru2m.*ESAC,.*y stru3m.*\\)" \ |
| "print structure mode 4" |
| |
| |
| if $passcount then { |
| pass "$passcount correct modes printed" |
| } |
| } |
| |
| # various tests if locations are treated correctly |
| # read access using ptype, print, whatis |
| proc test_locations {} { |
| global passcount |
| |
| set passcount 0 |
| verbose "testing read access to locations" |
| # various location tests can be found in chillvars.exp |
| |
| # set locations |
| test_print_accept "ptype s1l" "SET \\(aaa, bbb, ccc\\)" \ |
| "print mode of set location" |
| test_print_accept "whatis s1l" "set1" \ |
| "print modename of set location" |
| test_print_accept "print s1l" "ccc" "print set location" |
| test_print_accept "ptype s2l" "SET \\(na = 1, nb = 34, nc = 20\\)" \ |
| "print mode of numbered set location" |
| test_print_accept "whatis s2l" "nset1" \ |
| "print mode name of numbered set location" |
| test_print_accept "print s2l" "nb" "print numberes set location" |
| |
| # range modes |
| test_print_accept "ptype rl1" "ubyte \\(0:255\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl1" "r11" \ |
| "print mode name of range location" |
| test_print_accept "print rl1" "3" \ |
| "print range location" |
| |
| test_print_accept "ptype rl2" "ubyte \\(0:255\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl2" "r11" \ |
| "print mode name of range location" |
| test_print_accept "print rl2" "0" \ |
| "print range location" |
| |
| test_print_accept "ptype rl3" "ubyte \\(0:255\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl3" "r11" \ |
| "print mode name of range location" |
| test_print_accept "print rl3" "255" \ |
| "print range location" |
| |
| test_print_accept "ptype rl5" "uint \\(0:65535\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl5" "r12" \ |
| "print mode name of range location" |
| test_print_accept "print rl5" "65530" \ |
| "print range location" |
| |
| test_print_accept "ptype rl6" "uint \\(0:65535\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl6" "r12" \ |
| "print mode name of range location" |
| test_print_accept "print rl6" "0" \ |
| "print range location" |
| |
| test_print_accept "ptype rl7" "uint \\(0:65535\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl7" "r12" \ |
| "print mode name of range location" |
| test_print_accept "print rl7" "65535" \ |
| "print range location" |
| |
| # test_print_accept "ptype rl9" "ulong \\(0:4294967295\\)" \ |
| # "print mode of range location" |
| # test_print_accept "whatis rl9" "r13" \ |
| # "print mode name of range location" |
| # test_print_accept "print rl9" "128" \ |
| # "print range location" |
| |
| # test_print_accept "ptype rl10" "ulong \\(0:4294967295\\)" \ |
| # "print mode of range location" |
| # test_print_accept "whatis rl10" "r13" \ |
| # "print mode name of range location" |
| # test_print_accept "print rl10" "0" \ |
| # "print range location" |
| |
| # test_print_accept "ptype rl11" "ulong \\(0:4294967295\\)" \ |
| # "print mode of range location" |
| # test_print_accept "whatis rl11" "r13" \ |
| # "print mode name of range location" |
| # test_print_accept "print rl11" "4294967295" \ |
| # "print range location" |
| |
| test_print_accept "ptype rl13" "byte \\(-128:127\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl13" "r14" \ |
| "print mode name of range location" |
| test_print_accept "print rl13" "-121" \ |
| "print range location" |
| |
| test_print_accept "ptype rl14" "byte \\(-128:127\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl14" "r14" \ |
| "print mode name of range location" |
| test_print_accept "print rl14" "-128" \ |
| "print range location" |
| |
| test_print_accept "ptype rl15" "byte \\(-128:127\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl15" "r14" \ |
| "print mode name of range location" |
| test_print_accept "print rl15" "127" \ |
| "print range location" |
| |
| test_print_accept "ptype rl17" "int \\(-32768:32767\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl17" "r15" \ |
| "print mode name of range location" |
| test_print_accept "print rl17" "-32720" \ |
| "print range location" |
| |
| test_print_accept "ptype rl18" "int \\(-32768:32767\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl18" "r15" \ |
| "print mode name of range location" |
| test_print_accept "print rl18" "-32768" \ |
| "print range location" |
| |
| test_print_accept "ptype rl19" "int \\(-32768:32767\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl19" "r15" \ |
| "print mode name of range location" |
| test_print_accept "print rl19" "32767" \ |
| "print range location" |
| |
| test_print_accept "ptype rl21" "long \\(-2147483648:2147483647\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl21" "r16" \ |
| "print mode name of range location" |
| test_print_accept "print rl21" "2147483643" \ |
| "print range location" |
| |
| test_print_accept "ptype rl22" "long \\(-2147483648:2147483647\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl22" "r16" \ |
| "print mode name of range location" |
| test_print_accept "print rl22" "-2147483648" \ |
| "print range location" |
| |
| test_print_accept "ptype rl23" "long \\(-2147483648:2147483647\\)" \ |
| "print mode of range location" |
| test_print_accept "whatis rl23" "r16" \ |
| "print mode name of range location" |
| test_print_accept "print rl23" "2147483647" \ |
| "print range location" |
| |
| # powerset locations |
| test_print_accept "ptype pl1" \ |
| "POWERSET SET \\(p1, p2, p3, p4, p5, p6, p7, p8, p9, p10\\)" \ |
| "print mode of powerset location 1" |
| test_print_accept "whatis pl1" "pm1" \ |
| "print mode mode name of powerset location" |
| test_print_accept "print pl1" \ |
| "\[\[\]p1:p10\[\]\]" \ |
| "print powerset location 1" |
| test_print_accept "print pl2" {\[\]} \ |
| "print powerset location 2" |
| test_print_accept "print pl3" "\[\[\]p1, p10\[\]\]" \ |
| "print powerset location 3" |
| test_print_accept "print pl4" {\[p1:p2, p4:p6, p8:p10\]} \ |
| "print powerset location 4" |
| test_print_accept "print pl5" {\[p1:p4, p6, p8:p10\]} \ |
| "print powerset location 5" |
| test_print_accept "print pl6" {\[p1, p3:p8, p10\]} \ |
| "print powerset location 6" |
| |
| test_print_accept "ptype pl7" \ |
| "POWERSET byte \\(1:8\\)" \ |
| "print mode of byte powerset location" |
| test_print_accept "whatis pl7" "pm2" \ |
| "print modename of byte powerset location" |
| test_print_accept "print pl7" {\[1:8\]} \ |
| "print powerset location 7" |
| |
| test_print_accept "ptype pl8" \ |
| "POWERSET int \\(-32768:32767\\)" \ |
| "print mode of int powerset location" |
| test_print_accept "whatis pl8" "pm3" \ |
| "print modename of int powerset location" |
| test_print_accept "print pl8" {\[-32768:32767\]} \ |
| "print powerset location 8" |
| |
| # test_print_accept "ptype pl9" \ |
| # "POWERSET long \\(-2147483648:2147483647\\)" \ |
| # "print mode of long powerset location" |
| # test_print_accept "whatis pl9" "pm5" \ |
| # "print modename of long powerset location" |
| # test_print_accept "print pl9" {\[-2147483648:2147483647\]} \ |
| # "print powerset location 9" |
| |
| # reference modes |
| test_print_accept "ptype ref3l" "PTR" "print mode of reference location" |
| # setup_xfail "*-*-*" |
| test_print_accept "whatis ref3l" "ref3" \ |
| "print modename of reference location" |
| # setup_xfail "*-*-*" |
| test_print_accept "print ref3l" "ref3\\(H'.*\\)" \ |
| "print reference location" |
| test_print_accept "ptype ref4l" "PTR" "print mode of reference location" |
| # setup_xfail "*-*-*" |
| test_print_accept "whatis ref4l" "ref4" \ |
| "print modename of reference location" |
| # setup_xfail "*-*-*" |
| test_print_accept "print ref4l" "ref4\\(H'.*\\)" \ |
| "print reference location" |
| test_print_accept "ptype ref5l" "PTR" "print mode of reference location" |
| test_print_accept "whatis ref5l" "PTR" \ |
| "print modename of reference location" |
| test_print_accept "print ref5l" "PTR\\(H'.*\\)" \ |
| "print reference location" |
| |
| # dereference a little bit.. |
| test_print_accept "print ref6l->syn_int" "42" \ |
| "dereference reference to synmode location" |
| test_print_accept "print ref7l->int" "-42" \ |
| "dereference reference to predefined mode location" |
| test_print_accept "print ref8l->pm1" \ |
| "\[\[\]p1:p10\[\]\]" \ |
| "dereference reference to newmode location" |
| |
| # synchronization mode locations |
| # FIXME: synchronization modes are not supported so far... |
| xfail "no synchronization mode location support, not implemented yet" |
| |
| # timing mode locations |
| # FIXME: callbacks to abstime, inttime not implemented |
| xfail "timing modes not implemented properly yet" |
| |
| # char string locations |
| # some tests are don in chillvars.exp |
| test_print_accept "ptype strl1" \ |
| "CHARS \\(7\\) VARYING" \ |
| "print varying string location" |
| test_print_accept "whatis strl1" "strm2" \ |
| "print string locationa mode name" |
| test_print_accept "print strl1" \ |
| {\"hansi\^\(0\)\"} \ |
| "print string location" |
| # string elements |
| test_print_accept "print strl1(0)" "\'h\'" \ |
| "print string element 1" |
| test_print_accept "print strl1(5)" {'\^[(]0[)]'} \ |
| "print string element 2" |
| test_print_accept "print strl1(3)" "\'s\'" \ |
| "print string element 3" |
| test_print_accept "ptype strl1(0)" "char" \ |
| "print mode of string element" |
| # slices |
| test_print_accept "print strl1(3:4)" "\"si\"" \ |
| "print string slice 1" |
| test_print_accept "print strl1(0:5)" \ |
| {\"hansi\^\(0\)\"} \ |
| "print string slice 2" |
| test_print_accept "print strl1(0:0)" "\"h\"" \ |
| "print string slice 3" |
| test_print_accept "print strl1(0 up 6)" \ |
| {\"hansi\^\(0\)\"} \ |
| "print string slice 4" |
| # FIXME: adjust error message, when implented |
| gdb_test "print strl1(6 up 1)" \ |
| ".*slice.*out of range.*" \ |
| "print invalid string slice length" |
| gdb_test "print strl1(-1 up 5)" \ |
| ".*slice.*out of range.*" \ |
| "print invalid string slice length" |
| gdb_test "print strl1(-1:5)" \ |
| ".*slice.*out of range.*" \ |
| "print invalid string slice" |
| gdb_test "print strl1(-1:7)" \ |
| ".*slice.*out of range.*" \ |
| "print invalid string slice" |
| gdb_test "print strl1(0 up -1)" \ |
| ".*slice.*out of range.*" \ |
| "print invalid string slice length" |
| gdb_test "print strl1(0 up 0)" {""} |
| |
| # bitstring locations |
| test_print_accept "ptype bstr1" \ |
| "BOOLS \\(20\\)" \ |
| "print mode of bitstring location" |
| test_print_accept "whatis bstrl1" "bstr1" \ |
| "print mode name of bitstring location" |
| test_print_accept "print bstrl1" \ |
| "B'10101010101010101010'" \ |
| "print bitstring location" |
| |
| test_print_accept "ptype bstrl1(0)" "bool|BOOL" \ |
| "print mode of bitstring element" |
| test_print_accept "print bstrl1(0)" "TRUE" \ |
| "print bitstring element 1" |
| test_print_accept "print bstrl1(19)" "FALSE" \ |
| "print bitstring element 2" |
| test_print_accept "print bstrl1(10)" "TRUE" \ |
| "print bitstring element 3" |
| |
| test_print_accept "print bstrl1(0:19)" \ |
| "B'10101010101010101010'" \ |
| "print bitstring location slice 1" |
| test_print_accept "print bstrl1(0:0)" \ |
| "B'1'" \ |
| "print bitstring location slice 2" |
| test_print_accept "print bstrl1(3:9)" \ |
| "B'0101010'" \ |
| "print bitstring location slice 3" |
| test_print_accept "print bstrl1(0 up 20)" \ |
| "B'10101010101010101010'" \ |
| "print bitstring location slice 4" |
| test_print_accept "print bstrl1(19 up 1)" \ |
| "B'0'" \ |
| "print bitstring location slice 5" |
| gdb_test "print bstrl1(20 up 1)" \ |
| ".*slice out of range.*" \ |
| "print invalid bitstring slice (20 up 1)" |
| gdb_test "print bstrl1(-4:5)" \ |
| ".*slice out of range.*" \ |
| "print invalid bitstring slice (-4:5)" |
| gdb_test "print bstrl1(-1:up 1)" \ |
| ".*invalid expression syntax.*" \ |
| "print invalid bitstring slice (-1:ip 1)" |
| gdb_test "print bstrl1(-1:20)" \ |
| ".*slice out of range.*" \ |
| "print invalid bitstring slice (-1:20)" |
| gdb_test "print bstrl1(0 up -1)" \ |
| ".*slice out of range.*" \ |
| "print invalid bitstring slice (0 up -1)" |
| test_print_accept "print bstrl1(4 up 0)" "B''" |
| |
| # array mode locations |
| gdb_test_exact "ptype arrl1" \ |
| "ARRAY (1:100) set1" \ |
| "print mode of array location" |
| gdb_test "whatis arrl1" "arr1m" \ |
| "print mode name of array location" |
| gdb_test_exact "print arrl1" {[(1:100): aaa]} \ |
| "print array location" |
| test_print_accept "ptype arrl1(1)" \ |
| "SET \\(aaa, bbb, ccc\\)" \ |
| "print mode of array element" |
| gdb_test_exact "print arrl3" \ |
| {[(1:5): [(1:3): [(1:2): -2147483648]]]} \ |
| "print array location 2" |
| gdb_test_exact "print arrl3(1)" \ |
| {[(1:3): [(1:2): -2147483648]]} \ |
| "print array location 3" |
| gdb_test_exact "ptype arrl3(1)" \ |
| {ARRAY (1:3) ARRAY (1:2) long} \ |
| "print mode of array element" |
| test_print_accept "print arrl3(5)" \ |
| {\[\(1:3\): \[\(1:2\): -2147483648\]\]} \ |
| "print array location 4" |
| test_print_accept "print arrl3(1,1)" \ |
| {\[\(1:2\): -2147483648\]} \ |
| "print array location 5" |
| test_print_accept "ptype arrl3(1,1)" \ |
| {ARRAY \(1:2\) long} \ |
| "print mode of array element" |
| test_print_accept "print arrl3(5,3)" \ |
| {\[\(1:2\): -2147483648\]} \ |
| "print array location 6" |
| test_print_accept "print arrl3(1,1,1)" \ |
| "-2147483648" \ |
| "print array location 7" |
| test_print_accept "print arrl3(5,3,2)" \ |
| "-2147483648" \ |
| "print array location 8" |
| test_print_accept "print arrl3(1)(3)(2)" \ |
| "-2147483648" \ |
| "print array location 9" |
| |
| # reject the following range fails |
| # FIXME: adjust error messages |
| gdb_test "print arrl3(-1)" \ |
| ".*out of range.*" \ |
| "check invalid array indices 1" |
| gdb_test "print arrl3(6)" \ |
| ".*out of range.*" \ |
| "check invalid array indices 2" |
| gdb_test "print arrl3(0,0)" \ |
| ".*out of range.*" \ |
| "check invalid array indices 3" |
| gdb_test "print arrl3(1,0)" \ |
| ".*out of range.*" \ |
| "check invalid array indices 4" |
| gdb_test "print arrl3(1,4)" \ |
| ".*out of range.*" \ |
| "check invalid array indices 5" |
| gdb_test "print arrl3(6,4)" \ |
| ".*out of range.*" \ |
| "check invalid array indices 6" |
| gdb_test "print arrl3(1,1,0)" \ |
| ".*out of range.*" \ |
| "check invalid array indices 7" |
| gdb_test "print arrl3(6,4,0)" \ |
| ".*out of range.*" \ |
| "check invalid array indices 8" |
| gdb_test "print arrl3(1,1,3)" \ |
| ".*out of range.*" \ |
| "check invalid array indices 9" |
| |
| gdb_test "print arrl3(0)(0)" \ |
| ".* array or string index out of range.*" \ |
| "check invalid array indices 10" |
| gdb_test "print arrl3(1)(0)" \ |
| ".* array or string index out of range.*" \ |
| "check invalid array indices 11" |
| gdb_test "print arrl3(1)(4)" \ |
| ".* array or string index out of range.*" \ |
| "check invalid array indices 12" |
| gdb_test "print arrl3(6)(4)" \ |
| ".* array or string index out of range.*" \ |
| "check invalid array indices 13" |
| gdb_test "print arrl3(1)(1)(0)" \ |
| ".* array or string index out of range.*" \ |
| "check invalid array indices 14" |
| gdb_test "print arrl3(6)(4)(0)" \ |
| ".* array or string index out of range.*" \ |
| "check invalid array indices 15" |
| gdb_test "print arrl3(1)(1)(3)" \ |
| ".* array or string index out of range.*" \ |
| "check invalid array indices 16" |
| |
| # slices |
| test_print_accept "print arrl4(1:3)" \ |
| {\[\(1:2\): \[\(1:3\): \[\(1:2\): -2147483648\]\], \(3\): \[\(1:3\): \[\(1:2\): 100\]\]\]} \ |
| "print array slice 1" |
| test_print_accept "ptype arrl4(1:3)" \ |
| {ARRAY \(1:3\) ARRAY \(1:3\) ARRAY \(1:2\) long} \ |
| "print mode of array slice" |
| # The next one is bogus: |
| # test_print_accept "print arrl4(5, 2:3, 1)" \ |
| # # FIXME: maybe the '(1): ' in the inner tupel should be omitted ? \ |
| # {\[(2): \[\(1\): 100\], \(3\):\[\(1\): 100\]\]} \ |
| # "print array slice 2" |
| test_print_accept "print arrl4(1 up 4)" \ |
| {\[\(1:2\): \[\(1:3\): \[\(1:2\): -2147483648\]\], \(3\): \[\(1:3\): \[\(1:2\): 100\]\], \(4\): \[\(1:3\): \[\(1:2\): -2147483648\]\]\]} \ |
| "print array slice 3" |
| # The next two are bogus: |
| # test_print_accept "print arrl4(3, 2 up 1)" \ |
| # {\[\(2:3\): \[\(1:2\): 100\]\]} \ |
| # "print array slice 4" |
| # test_print_accept "print arrl4(1:2, 1 up 1, 2)" \ |
| # {\[\(1\): \[\(1\): \[\(2\): -2147483648\], \(2\): \[\(2\): -2147483648\]\], \(2\): \[\(1\): \[\(2\): -2147483648\], \(2\): \[\(2\): -2147483648\]\]\]} \ |
| # "print array slice 4" |
| # reject invalid slices |
| # FIXME: adjust error messages |
| gdb_test "print arrl4(5:6)" \ |
| ".*slice out of range.*" \ |
| "check invalid range 1" |
| gdb_test "print arrl4(0:1)" \ |
| ".*slice out of range.*" \ |
| "check invalid range 2" |
| gdb_test "print arrl4(0:6)" \ |
| ".*slice out of range.*" \ |
| "check invalid range 3" |
| gdb_test "print arrl4(3:2)" \ |
| ".*slice out of range.*" \ |
| "check invalid range 4" |
| gdb_test "print arrl4(1,3:4)" \ |
| ".*syntax error.*" \ |
| "check invalid range 5" |
| gdb_test "print arrl4(1,0:1)" \ |
| ".*syntax error.*" \ |
| "check invalid range 6" |
| gdb_test "print arrl4(1,0:4)" \ |
| ".*syntax error.*" \ |
| "check invalid range 7" |
| gdb_test "print arrl4(1,3:2)" \ |
| ".*syntax error.*" \ |
| "check invalid range 8" |
| gdb_test "print arrl4(5 up 2)" \ |
| ".*slice out of range.*" \ |
| "check invalid range 9" |
| gdb_test "print arrl4(-1 up 1)" \ |
| ".*slice out of range.*" \ |
| "check invalid range 10" |
| gdb_test "print arrl4(-1 up 7)" \ |
| ".*slice out of range.*" \ |
| "check invalid range 11" |
| gdb_test "print arrl4(1 up 0)" \ |
| ".*slice out of range.*" \ |
| "check invalid range 12" |
| gdb_test "print arrl4(1,3 up 1)" \ |
| ".*syntax error.*" \ |
| "check invalid range 13" |
| gdb_test "print arrl4(1,-1 up 1)" \ |
| ".*syntax error.*" \ |
| "check invalid range 14" |
| gdb_test "print arrl4(1,-1 up 5)" \ |
| ".*syntax error.*" \ |
| "check invalid range 15" |
| gdb_test "print arrl4(1,2 up 0)" \ |
| ".*syntax error.*" \ |
| "check invalid range 16" |
| |
| # structure modes |
| # some tests are in chillvars.exp |
| # FIXME: no tag processing implemented do maybe adjust these tests |
| setup_xfail "*-*-*" |
| test_print_accept "ptype stru1m" \ |
| "STRUCT \\(.*a long,.*b long,.*CASE b OF.*\\(42\\):.*ch1 CHARS\\(20\\),.*\\(52\\):.*ch2 CHARS\\(10\\).*ELSE.*ch3 CHARS\\(1\\).*ESAC.*\\)" \ |
| "print mode of structure location 1" |
| test_print_accept "whatis strul1" "stru1m" \ |
| "print mode name of structure location 1" |
| setup_xfail "*-*-*" |
| test_print_accept "print strul1" \ |
| {\[\.a: -2147483648, \.b: 42, \.\(b\): \{\(42\) = \[\.ch1: \"12345678900987654321\"\], \(52\) = \[\.ch2: \"1234567890\"\], (else) = \[\.ch3: \"1\"\]\}\]} \ |
| "print structure location 1" |
| test_print_accept "print strul1.a" \ |
| "-2147483648" \ |
| "print field of structure location 1" |
| test_print_accept "print strul1.b" "42" \ |
| "print field of structure location 1" |
| test_print_accept "print strul1.ch1" \ |
| "\"12345678900987654321\"" \ |
| "print field of structure location 1" |
| # setup_xfail "*-*-*" |
| test_print_accept "print strul1.ch2" \ |
| "\"1234567890\"" \ |
| "print field of structure location 1" |
| # setup_xfail "*-*-*" |
| test_print_accept "print strul1.ch3" \ |
| "\"1\"" \ |
| "print field of structure location 1" |
| |
| if $passcount then { |
| pass "$passcount correct locations printed" |
| } |
| } |
| |
| # This is chill/9434 |
| |
| proc test_9434 {} { |
| global passcount |
| |
| verbose "testing pr-9434" |
| |
| test_print_accept "ptype m_xyzmode" "STRUCT \\(.*next REF m_xyzmode,.*i long.*\\)" |
| } |
| |
| # Start with a fresh gdb. |
| |
| gdb_exit |
| gdb_start |
| gdb_reinitialize_dir $srcdir/$subdir |
| |
| gdb_test "set print sevenbit-strings" ".*" |
| |
| if [set_lang_chill] then { |
| test_modes |
| test_locations |
| test_9434 |
| } else { |
| warning "$test_name tests suppressed." |
| } |
