#   Copyright 1998, 2007, 2008 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.

# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu

# This file was written by Michael Snyder (msnyder@cygnus.com)

load_lib "trace-support.exp";

if $tracelevel then {
    strace $tracelevel
}

set prms_id 0
set bug_id 0

gdb_exit
gdb_start

if [istarget "m68k-*-elf"] then {
    load_lib "emc-support.exp";
    set srcfile gdb_c_test.c
    set binfile [board_info target d490_binfile];
    gdb_test "set remotetimeout 6" "" ""
    set timeout 500
    gdb_target_monitor "$binfile"
    # Give a TSTOP and ignore errors, to make sure any previous trace is off
    gdb_test "tstop" "" ""
    gdb_test "tfind none"  "" ""
    send_gdb "compare-sections CS\n"
    gdb_expect {
	-re "MIS-MATCHED.*$gdb_prompt $" {
	    untested backtrace.exp
	    return -1
	    all tests in this module will fail.";
	}
	-re ".*$gdb_prompt $" { }
    }
} else {
    set testfile "actions"
    set srcfile ${testfile}.c
    set binfile $objdir/$subdir/$testfile
    if { [gdb_compile "$srcdir/$subdir/$srcfile" $binfile \
	    executable {debug nowarnings}] != "" } {
	untested backtrace.exp
	return -1
    }
    gdb_load $binfile
    gdb_test "tstop"       "" ""
    gdb_test "tfind none"  "" ""
    runto_main
}
gdb_reinitialize_dir $srcdir/$subdir

# We generously give ourselves one "pass" if we successfully 
# detect that this test cannot be run on this target!
if { ![gdb_target_supports_trace] } then {
    pass "Current target does not support trace"
    return 1;

}

#
# test backtraces in trace frames
#

set testline1 0
set testline2 0
set testline3 0
set testline4 0
set testline5 0
set testline6 0

set arg1 1
set arg2 2
set arg3 3
set arg4 4
set arg5 5
set arg6 6

set baseline [gdb_find_recursion_test_baseline $srcfile];
if { $baseline == -1 } {
    fail "Could not find gdb_recursion_test function"
    return;
}

send_gdb "list $baseline, +12\n"
gdb_expect {
    -re "\[\r\n\](\[0-9\]+).*gdbtestline 1 " {
	set testline1 $expect_out(1,string)
	exp_continue
    }
    -re "\[\r\n\](\[0-9\]+).*gdbtestline 2 " {
	set testline2 $expect_out(1,string)
	exp_continue
    }
    -re "\[\r\n\](\[0-9\]+).*gdbtestline 3 " {
	set testline3 $expect_out(1,string)
	exp_continue
    }
    -re "\[\r\n\](\[0-9\]+).*gdbtestline 4 " {
	set testline4 $expect_out(1,string)
	exp_continue
    }
    -re "\[\r\n\](\[0-9\]+).*gdbtestline 5 " {
	set testline5 $expect_out(1,string)
	exp_continue
    }
    -re "\[\r\n\](\[0-9\]+).*gdbtestline 6 " {
	set testline6 $expect_out(1,string)
	exp_continue
    }
    -re ".*$gdb_prompt $" {
	if { ($testline1 == 0) || ($testline2 == 0) || ($testline3 == 0) || ($testline4 == 0) || ($testline5 == 0) || ($testline6 == 0) } {
	    untested backtrace.exp
	    return -1
all tests in this module will fail."
	}
    }
    default {
	    untested backtrace.exp
	    return -1
all tests in this module will fail."
    } 
}

#
# Setup backtrace experiment.  This will involve:
#   1) a tracepoint where nothing is collected
#   2) a tracepoint where only regs are collected
#   3) a tracepoint where regs, locals and args are collected
#   4) a tracepoint where regs plus some amount of stack are collected.
#

gdb_delete_tracepoints
set tdp2 [gdb_gettpnum $testline2]
set tdp3 [gdb_gettpnum $testline3]
set tdp4 [gdb_gettpnum $testline4]
set tdp5 [gdb_gettpnum $testline5]
set tdp6 [gdb_gettpnum $testline6]
if {    $tdp2 <= 0 || $tdp3 <= 0 || \
	$tdp4 <= 0 || $tdp5 <= 0 || $tdp6 <= 0 } then {
    fail "setting tracepoints failed"
    return;
}

#gdb_trace_setactions "setup TP to collect FP" \
#	"$tdp2" \
#	"collect \$fp" ""
#

gdb_trace_setactions "8.6: setup TP to collect regs" \
	"$tdp3" \
	"collect \$regs" "^$"

gdb_trace_setactions "8.6: setup TP to collect regs, args, and locals" \
	"$tdp4" \
	"collect \$regs, \$args, \$locs" "^$"

gdb_trace_setactions "8.6: setup TP to collect stack mem cast expr" \
	"$tdp6" \
	"collect \$fp, \(\*\(void \*\*\) \(\$sp\)\) @ 64" "^$"

gdb_test "tstart" "" ""

if [istarget "m68k-*-elf"] then {
    gdb_emclaptop_command "85,$arg1,$arg2,$arg3,$arg4,$arg5,$arg6"
    sleep 5
} else {
    gdb_test "break end" "" ""
    gdb_test "continue" \
	    "Continuing.*Breakpoint $decimal, end.*" \
	    "run trace experiment"
}

gdb_test "tstop" "" ""

proc gdb_backtrace_tdp_1 { msg } {
    global gdb_prompt
    
    # We are in a trace frame at which we didn't collect anything
    # except $PC.  Therefore we expect to be able to identify stack
    # frame #0, but that's about all.  In particular we do not expect
    # to be able to display the function's arguments or locals, and we
    # do not expect to be able to identify the caller of this function.
    
    send_gdb "backtrace\n"
    gdb_expect {
	-re "#0\[\t \]+gdb_recursion_test.*depth=.*$gdb_prompt $" {
	    pass "$msg"
	}
	-re ".*$gdb_prompt $" {
	    fail "$msg"
	}
	timeout { fail "$msg (timeout)" }
    }
}

proc gdb_backtrace_tdp_2 { msg } {
    global gdb_prompt

    # We are in a trace frame at which we collected only the registers
    # Therefore we expect to be able to identify stack frame #0, but
    # we don't expect to be able to display its args unles they are
    # passed in registers (which isn't the case for m68k), and we
    # don't expect to be able to identify the caller's stack frame.

    send_gdb "backtrace\n"
    gdb_expect {
	-re "#0\[\t \]+gdb_recursion_test.*depth=.*$gdb_prompt $" {
	    pass "$msg"
	}
	-re ".*$gdb_prompt $" {
	    fail "$msg"
	}
	timeout { fail "$msg (timeout)" }
    }
}

proc gdb_backtrace_tdp_3 { msg } {
    global gdb_prompt

    # We are in a trace frame at which we collected all registers, all
    # arguments and all locals.  This means that the display of
    # stack frame #0 should be complete (including argument values).

    send_gdb "backtrace\n"
    gdb_expect {
	-re "#0\[\t \]+gdb_recursion_test.*depth=\[0-9\]+.*q1=\[0-9\]+.*q2=\[0-9\]+.*q3=\[0-9\]+.*q4=\[0-9\]+.*q5=\[0-9\]+.*q6=\[0-9\]+.*$gdb_prompt $" {
	    pass "$msg"
	}
	-re "#0\[\t \]+gdb_recursion_test.*depth=Cannot access.*$gdb_prompt $" {
	    fail "$msg (failed to collect arguments)"
	}
	-re ".*$gdb_prompt $" {
	    fail "$msg"
	}
	timeout { fail "$msg (timeout)" }
    }
}

proc gdb_backtrace_tdp_4 { msg depth } {
    global gdb_prompt

    # We are in a trace frame at which we collected all registers,
    # plus a sizeable hunk of stack memory.  This should enable us to
    # display at least several stack frames worth of backtrace.  We'll
    # assume that if we can't display at least "depth" levels (with
    # args), it counts as an error.

    send_gdb "backtrace\n"
    gdb_expect {
	-re "#$depth\[\t \].*gdb_recursion_test.*depth=\[0-9\]+.*q1=\[0-9\]+.*q2=\[0-9\]+.*q3=\[0-9\]+.*q4=\[0-9\]+.*q5=\[0-9\]+.*q6=\[0-9\]+.*$gdb_prompt $" {
	    pass "$msg"
	}
	-re "#$depth\[\t \].*gdb_recursion_test.*depth=.*$gdb_prompt $" {
	    fail "$msg (args missing from #$depth stack frame)"
	}
	-re "#\[0-9\]+\[\t \].*gdb_recursion_test.*depth=.*$gdb_prompt $" {
	    fail "$msg (fewer than $depth stack frames found)"
	}
	-re ".*$gdb_prompt $" {
	    fail "$msg"
	}
	timeout { fail "$msg (timeout)" }
    }
}

#
# begin backtrace test
#

set timeout 60

gdb_tfind_test "init: make sure not debugging any trace frame" "none" "-1"

gdb_tfind_test "8.6: find start frame" "start" "0"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp2:" ""
gdb_backtrace_tdp_1 "8.6: Backtrace, depth == 1, collect nothing"

gdb_tfind_test "8.6: find frame 1"     "1" "1"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp3:" ""
gdb_backtrace_tdp_2 "8.6: Backtrace, depth == 1, collect regs"

gdb_tfind_test "8.6: find frame 2"     "2" "2"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp4:" ""
gdb_backtrace_tdp_3 "8.6: Backtrace, depth == 1, collect args and locals"


gdb_tfind_test "8.6: find frame 4"     "4" "4"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp6:" ""
gdb_backtrace_tdp_4 "8.6: Backtrace, depth == 1, collect stack mem expr" "0"

gdb_tfind_test "8.6: find frame 5"     "5" "5"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp2:" ""
gdb_backtrace_tdp_1 "8.6: Backtrace, depth == 2, collect nothing"

gdb_tfind_test "8.6: find frame 6"     "6" "6"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp3:" ""
gdb_backtrace_tdp_2 "8.6: Backtrace, depth == 2, collect regs"

gdb_tfind_test "8.6: find frame 7"     "7" "7"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp4:" ""
gdb_backtrace_tdp_3 "8.6: Backtrace, depth == 2, collect args and locals"


gdb_tfind_test "8.6: find frame 9"     "9" "9"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp6:" ""
gdb_backtrace_tdp_4 "8.6: Backtrace, depth == 1, collect stack mem expr" "0"

gdb_tfind_test "8.6: find frame 10"    "10" "10"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp2:" ""
gdb_backtrace_tdp_1 "8.6: Backtrace, depth == 3, collect nothing"

gdb_tfind_test "8.6: find frame 11"    "11" "11"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp3:" ""
gdb_backtrace_tdp_2 "8.6: Backtrace, depth == 3, collect regs"

gdb_tfind_test "8.6: find frame 12"    "12" "12"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp4:" ""
gdb_backtrace_tdp_3 "8.6: Backtrace, depth == 3, collect args and locals"


gdb_tfind_test "8.6: find frame 14"    "14" "14"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp6:" ""
gdb_backtrace_tdp_4 "8.6: Backtrace, depth == 1, collect stack mem expr" "0"

gdb_tfind_test "8.6: find frame 15"    "15" "15"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp2:" ""
gdb_backtrace_tdp_1 "8.6: Backtrace, depth == 4, collect nothing"

gdb_tfind_test "8.6: find frame 16"    "16" "16"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp3:" ""
gdb_backtrace_tdp_2 "8.6: Backtrace, depth == 4, collect regs"

gdb_tfind_test "8.6: find frame 17"    "17" "17"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp4:" ""
gdb_backtrace_tdp_3 "8.6: Backtrace, depth == 4, collect args and locals"


gdb_tfind_test "8.6: find frame 19"    "19" "19"
gdb_test "printf \"TDP \%d:\\n\", \$tracepoint" \
	"TDP $tdp6:" ""
gdb_backtrace_tdp_4 "8.6: Backtrace, depth == 1, collect stack mem expr" "0"

gdb_test "printf \"x \%d x\\n\", depth == 3" \
	"x 0 x" \
	"1.13: trace in recursion: depth not equal to 3"

# Finished!
gdb_test "tfind none" "" ""