Makefile.in

# Makefile.in generated by automake 1.15.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2017 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# Copyright (C) 1992-2019, 2020, 2022 Free Software Foundation, Inc.
#
# This file is part of DejaGnu.
#
# DejaGnu is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
#
# DejaGnu is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with DejaGnu; if not, write to the Free Software Foundation,
# Inc., 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA.

# Process this file with automake to generate Makefile.in



VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
check_PROGRAMS = testsuite/libdejagnu/unit-c$(EXEEXT) \
	testsuite/libdejagnu/unit-cxx$(EXEEXT) \
	testsuite/libdejagnu/unit-ccxxmix$(EXEEXT)
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(srcdir)/doc/version.texi \
	$(srcdir)/doc/stamp-vti $(include_HEADERS) $(am__DIST_COMMON)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__dirstamp = $(am__leading_dot)dirstamp
am_testsuite_libdejagnu_unit_c_OBJECTS =  \
	testsuite/libdejagnu/unit-c.$(OBJEXT)
testsuite_libdejagnu_unit_c_OBJECTS =  \
	$(am_testsuite_libdejagnu_unit_c_OBJECTS)
testsuite_libdejagnu_unit_c_LDADD = $(LDADD)
am_testsuite_libdejagnu_unit_ccxxmix_OBJECTS =  \
	testsuite/libdejagnu/unit-ccxxmix.$(OBJEXT)
testsuite_libdejagnu_unit_ccxxmix_OBJECTS =  \
	$(am_testsuite_libdejagnu_unit_ccxxmix_OBJECTS)
testsuite_libdejagnu_unit_ccxxmix_LDADD = $(LDADD)
am_testsuite_libdejagnu_unit_cxx_OBJECTS =  \
	testsuite/libdejagnu/unit-cxx.$(OBJEXT)
testsuite_libdejagnu_unit_cxx_OBJECTS =  \
	$(am_testsuite_libdejagnu_unit_cxx_OBJECTS)
testsuite_libdejagnu_unit_cxx_LDADD = $(LDADD)
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(djlibexecdir)" \
	"$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" \
	"$(DESTDIR)$(baseboarddir)" "$(DESTDIR)$(commandsdir)" \
	"$(DESTDIR)$(configdir)" "$(DESTDIR)$(pkgdatadir)" \
	"$(DESTDIR)$(includedir)"
SCRIPTS = $(bin_SCRIPTS) $(djlibexec_SCRIPTS)
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo "  CC      " $@;
am__v_CC_1 = 
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo "  CCLD    " $@;
am__v_CCLD_1 = 
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
AM_V_CXX = $(am__v_CXX_@AM_V@)
am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
am__v_CXX_0 = @echo "  CXX     " $@;
am__v_CXX_1 = 
CXXLD = $(CXX)
CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
	-o $@
AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
am__v_CXXLD_0 = @echo "  CXXLD   " $@;
am__v_CXXLD_1 = 
SOURCES = $(testsuite_libdejagnu_unit_c_SOURCES) \
	$(testsuite_libdejagnu_unit_ccxxmix_SOURCES) \
	$(testsuite_libdejagnu_unit_cxx_SOURCES)
DIST_SOURCES = $(testsuite_libdejagnu_unit_c_SOURCES) \
	$(testsuite_libdejagnu_unit_ccxxmix_SOURCES) \
	$(testsuite_libdejagnu_unit_cxx_SOURCES)
AM_V_DVIPS = $(am__v_DVIPS_@AM_V@)
am__v_DVIPS_ = $(am__v_DVIPS_@AM_DEFAULT_V@)
am__v_DVIPS_0 = @echo "  DVIPS   " $@;
am__v_DVIPS_1 = 
AM_V_MAKEINFO = $(am__v_MAKEINFO_@AM_V@)
am__v_MAKEINFO_ = $(am__v_MAKEINFO_@AM_DEFAULT_V@)
am__v_MAKEINFO_0 = @echo "  MAKEINFO" $@;
am__v_MAKEINFO_1 = 
AM_V_INFOHTML = $(am__v_INFOHTML_@AM_V@)
am__v_INFOHTML_ = $(am__v_INFOHTML_@AM_DEFAULT_V@)
am__v_INFOHTML_0 = @echo "  INFOHTML" $@;
am__v_INFOHTML_1 = 
AM_V_TEXI2DVI = $(am__v_TEXI2DVI_@AM_V@)
am__v_TEXI2DVI_ = $(am__v_TEXI2DVI_@AM_DEFAULT_V@)
am__v_TEXI2DVI_0 = @echo "  TEXI2DVI" $@;
am__v_TEXI2DVI_1 = 
AM_V_TEXI2PDF = $(am__v_TEXI2PDF_@AM_V@)
am__v_TEXI2PDF_ = $(am__v_TEXI2PDF_@AM_DEFAULT_V@)
am__v_TEXI2PDF_0 = @echo "  TEXI2PDF" $@;
am__v_TEXI2PDF_1 = 
AM_V_texinfo = $(am__v_texinfo_@AM_V@)
am__v_texinfo_ = $(am__v_texinfo_@AM_DEFAULT_V@)
am__v_texinfo_0 = -q
am__v_texinfo_1 = 
AM_V_texidevnull = $(am__v_texidevnull_@AM_V@)
am__v_texidevnull_ = $(am__v_texidevnull_@AM_DEFAULT_V@)
am__v_texidevnull_0 = > /dev/null
am__v_texidevnull_1 = 
INFO_DEPS = $(srcdir)/doc/dejagnu.info
am__TEXINFO_TEX_DIR = $(srcdir)/doc
DVIS = doc/dejagnu.dvi
PDFS = doc/dejagnu.pdf
PSS = doc/dejagnu.ps
HTMLS = doc/dejagnu.html
TEXINFOS = doc/dejagnu.texi
TEXI2DVI = texi2dvi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(dist_man_MANS)
DATA = $(baseboard_DATA) $(commands_DATA) $(config_DATA) \
	$(pkgdata_DATA)
HEADERS = $(include_HEADERS)
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
CSCOPE = cscope
AM_RECURSIVE_TARGETS = cscope
RUNTESTDEFAULTFLAGS = --tool $$tool --srcdir $$srcdir
EXPECT = expect
am__DIST_COMMON = $(dist_man_MANS) $(doc_dejagnu_TEXINFOS) \
	$(srcdir)/Makefile.in AUTHORS COPYING ChangeLog INSTALL NEWS \
	README TODO compile config.guess config.sub depcomp install-sh \
	mdate-sh missing
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  if test -d "$(distdir)"; then \
    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
      && rm -rf "$(distdir)" \
      || { sleep 5 && rm -rf "$(distdir)"; }; \
  else :; fi
am__post_remove_distdir = $(am__remove_distdir)
DIST_ARCHIVES = $(distdir).tar.gz
GZIP_ENV = --best
DIST_TARGETS = dist-gzip
distuninstallcheck_listfiles = find . -type f -print
am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
CXX = @CXX@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEJAGNU = @DEJAGNU@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EXEEXT = @EXEEXT@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build_alias = @build_alias@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host_alias = @host_alias@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = dejagnu

# record all files in the distribution tarball as owned by root
TAR_OPTIONS = --format=v7 --owner=0 --group=0
EXTRA_DIST = ChangeLog-1992 MAINTAINERS dejagnu runtest \
	$(pkgdata_DATA) $(config_DATA) $(baseboard_DATA) \
	$(commands_DATA) $(TESTSUITE_FILES) $(TEXINFO_TEX)\
	$(CONTRIB)

CLEANFILES = dbg.log nested-init.exp pr48155-init.exp
bin_SCRIPTS = dejagnu runtest
include_HEADERS = dejagnu.h
pkgdata_DATA = \
  stub-loader.c \
  testglue.c \
  runtest.exp \
  lib/debugger.exp \
  lib/dejagnu.exp \
  lib/dg.exp \
  lib/dmucs.exp \
  lib/framework.exp \
  lib/ftp.exp \
  lib/kermit.exp \
  lib/libgloss.exp \
  lib/remote.exp \
  lib/rlogin.exp \
  lib/rsh.exp \
  lib/ssh.exp \
  lib/standard.exp \
  lib/target.exp \
  lib/targetdb.exp \
  lib/telnet.exp \
  lib/tip.exp \
  lib/utils.exp

commandsdir = $(pkgdatadir)/commands
commands_DATA = \
	commands/help.sh \
	commands/report-card.awk

configdir = $(pkgdatadir)/config
config_DATA = \
	config/README \
	config/adb.exp \
	config/aarch64-fv8.exp \
	config/default.exp \
	config/gdb-comm.exp \
	config/gdb_stub.exp \
	config/sid.exp \
	config/sim.exp \
	config/unix.exp \
	config/vxworks.exp

baseboarddir = $(pkgdatadir)/baseboards
baseboard_DATA = \
	baseboards/README \
	baseboards/aarch64-sim.exp \
	baseboards/am33_2.0-libremote.exp \
	baseboards/androideabi.exp \
	baseboards/arm-ice.exp \
	baseboards/arm-sid.exp \
	baseboards/arm-sim.exp \
	baseboards/basic-sid.exp \
	baseboards/basic-sim.exp \
	baseboards/cris-sim.exp \
	baseboards/d30v-sim.exp \
	baseboards/fr30-sim.exp \
	baseboards/frv-sim.exp \
	baseboards/gdbserver-sample.exp \
	baseboards/generic-sim.exp \
	baseboards/i386-sid.exp \
	baseboards/iq2000-sim.exp \
	baseboards/jmr3904-sim.exp \
	baseboards/linux-gdbserver.exp \
	baseboards/linux-libremote.exp \
	baseboards/m68k-sid.exp \
	baseboards/mcore-moto-sim.exp \
	baseboards/mcore-sim.exp \
	baseboards/mips-lnews-sim.exp \
	baseboards/mips-lsi-sim.exp \
	baseboards/mips-sim-idt32.exp \
	baseboards/mips-sim-idt64.exp \
	baseboards/mips-sim-mti32.exp \
	baseboards/mips-sim-mti64.exp \
	baseboards/mips-sim-mti64_64.exp \
	baseboards/mips-sim-mti64_n32.exp \
	baseboards/mips-sim-sde32.exp \
	baseboards/mips-sim-sde64.exp \
	baseboards/mips-sim.exp \
	baseboards/mmixware-sim.exp \
	baseboards/mn10200-sim.exp \
	baseboards/mn10300-sim.exp \
	baseboards/moxie-sim.exp \
	baseboards/msp430-sim.exp \
	baseboards/mt-sid.exp \
	baseboards/multi-sim.exp \
	baseboards/pi.exp \
	baseboards/powerpc-sim.exp \
	baseboards/powerpcle-sim.exp \
	baseboards/pru-sim.exp \
	baseboards/qemu.exp \
	baseboards/riscv-sim.exp \
	baseboards/rx-sim.exp \
	baseboards/sh-sid.exp \
	baseboards/sh-sim.exp \
	baseboards/sparc-sim.exp \
	baseboards/sparc64-sim.exp \
	baseboards/sparclite-sim-le.exp \
	baseboards/sparclite-sim.exp \
	baseboards/tx39-sim.exp \
	baseboards/unix.exp \
	baseboards/v850-sim.exp \
	baseboards/visium-sim.exp \
	baseboards/vr4100-sim.exp \
	baseboards/vr4111-sim.exp \
	baseboards/vr4300-sim.exp \
	baseboards/xtensa-sim.exp

djlibexecdir = $(pkgdatadir)/libexec
djlibexec_SCRIPTS = config.guess

# Contributed scripts, etc.
CONTRIB = contrib/sum2junit.sh \
	contrib/mysql/create-db.sql contrib/mysql/importxml.sh \
	contrib/mysql/make-datafile.sh contrib/mysql/plot.sh \
	contrib/mysql/README contrib/mysql/sum2xml.sh \
	contrib/dejagnu.py


# Testsuite.
TESTSUITE_FILES = \
	testsuite/launcher.all/command.exp \
	testsuite/launcher.all/command/commands/bar-baz.awk \
	testsuite/launcher.all/command/commands/bar.awk \
	testsuite/launcher.all/command/commands/bar.sh \
	testsuite/launcher.all/command/commands/baz-quux.gawk \
	testsuite/launcher.all/command/commands/foo.sh \
	testsuite/launcher.all/command/commands/foo.tcl \
	testsuite/launcher.all/help.exp \
	testsuite/launcher.all/interp.exp \
	testsuite/launcher.all/verbose.exp \
	testsuite/report-card.all/onetest.exp \
	testsuite/report-card.all/passes.exp \
	testsuite/runtest.libs/topdir/subdir1/subsubdir1/subsubfile1 \
	testsuite/runtest.libs/topdir/subdir1/subfile1 \
	testsuite/runtest.libs/topdir/subdir1/subfile2 \
	testsuite/runtest.libs/topdir/subdir2/subfile2 \
	testsuite/runtest.libs/libs.exp \
	testsuite/runtest.libs/default_procs.tcl \
	testsuite/runtest.libs/mockutil.tcl \
	testsuite/runtest.libs/clone_output.test \
	testsuite/runtest.libs/config.test \
	testsuite/runtest.libs/remote.test \
	testsuite/runtest.libs/target.test \
	testsuite/runtest.libs/testcase_group.test \
	testsuite/runtest.libs/testsuite_can.test \
	testsuite/runtest.libs/testsuite_file.test \
	testsuite/runtest.libs/utils.test \
	testsuite/runtest.main/error.exp \
	testsuite/runtest.main/nested/testsuite/error.test/error-al-dbz.exp \
	testsuite/runtest.main/nested/testsuite/error.test/error-dbz.exp \
	testsuite/runtest.main/nested/testsuite/error.test/error-undef.exp \
	testsuite/runtest.main/nested/testsuite/error.test/simple.exp \
	testsuite/runtest.main/options.exp \
	testsuite/runtest.main/nested/testsuite/null.test/null.exp \
	testsuite/runtest.main/stats.exp \
	testsuite/runtest.main/nested/testsuite/stat.test/stats-sub.exp \
	testsuite/runtest.main/nested/testsuite/stat.test/unit-sub.awk \
	testsuite/runtest.main/nested/testsuite/stat.test/unit-sub.exp \
	testsuite/runtest.main/pr42399.exp \
	testsuite/runtest.main/nested/testsuite/bug.test/pr42399.awk \
	testsuite/runtest.main/nested/testsuite/bug.test/pr42399-sub.exp \
	testsuite/runtest.main/pr48155-csh.sh \
	testsuite/runtest.main/pr48155.exp \
	testsuite/runtest.main/pr53427.exp \
	testsuite/runtest.main/nested/testsuite/pr53427.test/a.exp \
	testsuite/runtest.main/nested/testsuite/pr53427.test/b.exp \
	testsuite/lib/bohman_ssd.exp \
	testsuite/lib/launcher.exp \
	testsuite/lib/libdejagnu.exp \
	testsuite/lib/libsup.exp \
	testsuite/lib/report-card.exp \
	testsuite/lib/runtest.exp \
	testsuite/lib/util-defs.exp \
	testsuite/libdejagnu/unit.exp \
	testsuite/libdejagnu/tunit.exp

DEJATOOL = launcher libdejagnu report-card runtest

# We override runtest so that the testsuite is run with this version
# of DejaGnu instead of an installed version.
RUNTEST = ${top_srcdir}/runtest
AM_CPPFLAGS = -I$(top_srcdir)
testsuite_libdejagnu_unit_c_SOURCES = testsuite/libdejagnu/unit-c.c
testsuite_libdejagnu_unit_cxx_SOURCES = testsuite/libdejagnu/unit-cxx.cxx
testsuite_libdejagnu_unit_ccxxmix_SOURCES = testsuite/libdejagnu/unit-ccxxmix.cxx

# Documentation.
TEXINFO_TEX = doc/texinfo.tex
dist_man_MANS = doc/dejagnu.1 \
	doc/dejagnu-help.1 \
	doc/dejagnu-report-card.1 \
	doc/runtest.1

info_TEXINFOS = doc/dejagnu.texi
doc_dejagnu_TEXINFOS = doc/fdl.texi
all: all-am

.SUFFIXES:
.SUFFIXES: .c .cxx .dvi .o .obj .ps
am--refresh: Makefile
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

clean-checkPROGRAMS:
	-test -z "$(check_PROGRAMS)" || rm -f $(check_PROGRAMS)
testsuite/libdejagnu/$(am__dirstamp):
	@$(MKDIR_P) testsuite/libdejagnu
	@: > testsuite/libdejagnu/$(am__dirstamp)
testsuite/libdejagnu/$(DEPDIR)/$(am__dirstamp):
	@$(MKDIR_P) testsuite/libdejagnu/$(DEPDIR)
	@: > testsuite/libdejagnu/$(DEPDIR)/$(am__dirstamp)
testsuite/libdejagnu/unit-c.$(OBJEXT):  \
	testsuite/libdejagnu/$(am__dirstamp) \
	testsuite/libdejagnu/$(DEPDIR)/$(am__dirstamp)

testsuite/libdejagnu/unit-c$(EXEEXT): $(testsuite_libdejagnu_unit_c_OBJECTS) $(testsuite_libdejagnu_unit_c_DEPENDENCIES) $(EXTRA_testsuite_libdejagnu_unit_c_DEPENDENCIES) testsuite/libdejagnu/$(am__dirstamp)
	@rm -f testsuite/libdejagnu/unit-c$(EXEEXT)
	$(AM_V_CCLD)$(LINK) $(testsuite_libdejagnu_unit_c_OBJECTS) $(testsuite_libdejagnu_unit_c_LDADD) $(LIBS)
testsuite/libdejagnu/unit-ccxxmix.$(OBJEXT):  \
	testsuite/libdejagnu/$(am__dirstamp) \
	testsuite/libdejagnu/$(DEPDIR)/$(am__dirstamp)

testsuite/libdejagnu/unit-ccxxmix$(EXEEXT): $(testsuite_libdejagnu_unit_ccxxmix_OBJECTS) $(testsuite_libdejagnu_unit_ccxxmix_DEPENDENCIES) $(EXTRA_testsuite_libdejagnu_unit_ccxxmix_DEPENDENCIES) testsuite/libdejagnu/$(am__dirstamp)
	@rm -f testsuite/libdejagnu/unit-ccxxmix$(EXEEXT)
	$(AM_V_CXXLD)$(CXXLINK) $(testsuite_libdejagnu_unit_ccxxmix_OBJECTS) $(testsuite_libdejagnu_unit_ccxxmix_LDADD) $(LIBS)
testsuite/libdejagnu/unit-cxx.$(OBJEXT):  \
	testsuite/libdejagnu/$(am__dirstamp) \
	testsuite/libdejagnu/$(DEPDIR)/$(am__dirstamp)

testsuite/libdejagnu/unit-cxx$(EXEEXT): $(testsuite_libdejagnu_unit_cxx_OBJECTS) $(testsuite_libdejagnu_unit_cxx_DEPENDENCIES) $(EXTRA_testsuite_libdejagnu_unit_cxx_DEPENDENCIES) testsuite/libdejagnu/$(am__dirstamp)
	@rm -f testsuite/libdejagnu/unit-cxx$(EXEEXT)
	$(AM_V_CXXLD)$(CXXLINK) $(testsuite_libdejagnu_unit_cxx_OBJECTS) $(testsuite_libdejagnu_unit_cxx_LDADD) $(LIBS)
install-binSCRIPTS: $(bin_SCRIPTS)
	@$(NORMAL_INSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-binSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	dir='$(DESTDIR)$(bindir)'; $(am__uninstall_files_from_dir)
install-djlibexecSCRIPTS: $(djlibexec_SCRIPTS)
	@$(NORMAL_INSTALL)
	@list='$(djlibexec_SCRIPTS)'; test -n "$(djlibexecdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(djlibexecdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(djlibexecdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(djlibexecdir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(djlibexecdir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-djlibexecSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(djlibexec_SCRIPTS)'; test -n "$(djlibexecdir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	dir='$(DESTDIR)$(djlibexecdir)'; $(am__uninstall_files_from_dir)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)
	-rm -f testsuite/libdejagnu/*.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@testsuite/libdejagnu/$(DEPDIR)/unit-c.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/libdejagnu/$(DEPDIR)/unit-ccxxmix.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@testsuite/libdejagnu/$(DEPDIR)/unit-cxx.Po@am__quote@

.c.o:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<

.c.obj:
@am__fastdepCC_TRUE@	$(AM_V_CC)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCC_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.cxx.o:
@am__fastdepCXX_TRUE@	$(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCXX_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<

.cxx.obj:
@am__fastdepCXX_TRUE@	$(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCXX_TRUE@	$(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	$(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@	$(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
doc/$(am__dirstamp):
	@$(MKDIR_P) doc
	@: > doc/$(am__dirstamp)

$(srcdir)/doc/dejagnu.info: doc/dejagnu.texi $(srcdir)/doc/version.texi $(doc_dejagnu_TEXINFOS)
	$(AM_V_MAKEINFO)restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	am__cwd=`pwd` && $(am__cd) $(srcdir) && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	cd "$$am__cwd"; \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
	 -o $@ $(srcdir)/doc/dejagnu.texi; \
	then \
	  rc=0; \
	  $(am__cd) $(srcdir); \
	else \
	  rc=$$?; \
	  $(am__cd) $(srcdir) && \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

doc/dejagnu.dvi: doc/dejagnu.texi $(srcdir)/doc/version.texi $(doc_dejagnu_TEXINFOS) doc/$(am__dirstamp)
	$(AM_V_TEXI2DVI)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
	$(TEXI2DVI) $(AM_V_texinfo) --build-dir=$(@:.dvi=.t2d) -o $@ $(AM_V_texidevnull) \
	`test -f 'doc/dejagnu.texi' || echo '$(srcdir)/'`doc/dejagnu.texi

doc/dejagnu.pdf: doc/dejagnu.texi $(srcdir)/doc/version.texi $(doc_dejagnu_TEXINFOS) doc/$(am__dirstamp)
	$(AM_V_TEXI2PDF)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc' \
	$(TEXI2PDF) $(AM_V_texinfo) --build-dir=$(@:.pdf=.t2p) -o $@ $(AM_V_texidevnull) \
	`test -f 'doc/dejagnu.texi' || echo '$(srcdir)/'`doc/dejagnu.texi

doc/dejagnu.html: doc/dejagnu.texi $(srcdir)/doc/version.texi $(doc_dejagnu_TEXINFOS) doc/$(am__dirstamp)
	$(AM_V_MAKEINFO)rm -rf $(@:.html=.htp)
	$(AM_V_at)if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I doc -I $(srcdir)/doc \
	 -o $(@:.html=.htp) `test -f 'doc/dejagnu.texi' || echo '$(srcdir)/'`doc/dejagnu.texi; \
	then \
	  rm -rf $@ && mv $(@:.html=.htp) $@; \
	else \
	  rm -rf $(@:.html=.htp); exit 1; \
	fi
$(srcdir)/doc/version.texi: @MAINTAINER_MODE_TRUE@ $(srcdir)/doc/stamp-vti
$(srcdir)/doc/stamp-vti: doc/dejagnu.texi $(top_srcdir)/configure
	@test -f doc/$(am__dirstamp) || $(MAKE) $(AM_MAKEFLAGS) doc/$(am__dirstamp)
	@(dir=.; test -f ./doc/dejagnu.texi || dir=$(srcdir); \
	set `$(SHELL) $(srcdir)/mdate-sh $$dir/doc/dejagnu.texi`; \
	echo "@set UPDATED $$1 $$2 $$3"; \
	echo "@set UPDATED-MONTH $$2 $$3"; \
	echo "@set EDITION $(VERSION)"; \
	echo "@set VERSION $(VERSION)") > vti.tmp$$$$ && \
	(cmp -s vti.tmp$$$$ $(srcdir)/doc/version.texi \
	  || (echo "Updating $(srcdir)/doc/version.texi" && \
	      cp vti.tmp$$$$ $(srcdir)/doc/version.texi.tmp$$$$ && \
	      mv $(srcdir)/doc/version.texi.tmp$$$$ $(srcdir)/doc/version.texi)) && \
	rm -f vti.tmp$$$$ $(srcdir)/doc/version.texi.$$$$
	@cp $(srcdir)/doc/version.texi $@

mostlyclean-vti:
	-rm -f vti.tmp* $(srcdir)/doc/version.texi.tmp*

maintainer-clean-vti:
@MAINTAINER_MODE_TRUE@	-rm -f $(srcdir)/doc/stamp-vti $(srcdir)/doc/version.texi
.dvi.ps:
	$(AM_V_DVIPS)TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) $(AM_V_texinfo) -o $@ $<

uninstall-dvi-am:
	@$(NORMAL_UNINSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
	done

uninstall-html-am:
	@$(NORMAL_UNINSTALL)
	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if test -d '$(DESTDIR)$(infodir)' && $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
	    if test -f $$file; then \
	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	      test -f "$(distdir)/$$relfile" || \
		cp -p $$file "$(distdir)/$$relfile"; \
	    else :; fi; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf doc/dejagnu.t2d doc/dejagnu.t2p

clean-aminfo:
	-test -z "doc/dejagnu.dvi doc/dejagnu.pdf doc/dejagnu.ps doc/dejagnu.html" \
	|| rm -rf doc/dejagnu.dvi doc/dejagnu.pdf doc/dejagnu.ps doc/dejagnu.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-man1: $(dist_man_MANS)
	@$(NORMAL_INSTALL)
	@list1=''; \
	list2='$(dist_man_MANS)'; \
	test -n "$(man1dir)" \
	  && test -n "`echo $$list1$$list2`" \
	  || exit 0; \
	echo " $(MKDIR_P) '$(DESTDIR)$(man1dir)'"; \
	$(MKDIR_P) "$(DESTDIR)$(man1dir)" || exit 1; \
	{ for i in $$list1; do echo "$$i"; done;  \
	if test -n "$$list2"; then \
	  for i in $$list2; do echo "$$i"; done \
	    | sed -n '/\.1[a-z]*$$/p'; \
	fi; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(dist_man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
install-baseboardDATA: $(baseboard_DATA)
	@$(NORMAL_INSTALL)
	@list='$(baseboard_DATA)'; test -n "$(baseboarddir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(baseboarddir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(baseboarddir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(baseboarddir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(baseboarddir)" || exit $$?; \
	done

uninstall-baseboardDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(baseboard_DATA)'; test -n "$(baseboarddir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(baseboarddir)'; $(am__uninstall_files_from_dir)
install-commandsDATA: $(commands_DATA)
	@$(NORMAL_INSTALL)
	@list='$(commands_DATA)'; test -n "$(commandsdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(commandsdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(commandsdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(commandsdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(commandsdir)" || exit $$?; \
	done

uninstall-commandsDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(commands_DATA)'; test -n "$(commandsdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(commandsdir)'; $(am__uninstall_files_from_dir)
install-configDATA: $(config_DATA)
	@$(NORMAL_INSTALL)
	@list='$(config_DATA)'; test -n "$(configdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(configdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(configdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(configdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(configdir)" || exit $$?; \
	done

uninstall-configDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(config_DATA)'; test -n "$(configdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(configdir)'; $(am__uninstall_files_from_dir)
install-pkgdataDATA: $(pkgdata_DATA)
	@$(NORMAL_INSTALL)
	@list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgdatadir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgdatadir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgdatadir)" || exit $$?; \
	done

uninstall-pkgdataDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(pkgdata_DATA)'; test -n "$(pkgdatadir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(pkgdatadir)'; $(am__uninstall_files_from_dir)
install-includeHEADERS: $(include_HEADERS)
	@$(NORMAL_INSTALL)
	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(includedir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(includedir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
	done

uninstall-includeHEADERS:
	@$(NORMAL_UNINSTALL)
	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(includedir)'; $(am__uninstall_files_from_dir)

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-am

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscope: cscope.files
	test ! -s cscope.files \
	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
clean-cscope:
	-rm -f cscope.files
cscope.files: clean-cscope cscopelist
cscopelist: cscopelist-am

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files

check-DEJAGNU: site.exp
	srcdir='$(srcdir)'; export srcdir; \
	EXPECT=$(EXPECT); export EXPECT; \
	if $(SHELL) -c "$(RUNTEST) --version" > /dev/null 2>&1; then \
	  exit_status=0; l='$(DEJATOOL)'; for tool in $$l; do \
	    if $(RUNTEST) $(AM_RUNTESTFLAGS) $(RUNTESTDEFAULTFLAGS) $(RUNTESTFLAGS); \
	    then :; else exit_status=1; fi; \
	  done; \
	else echo "WARNING: could not find '$(RUNTEST)'" 1>&2; :;\
	fi; \
	exit $$exit_status
site.exp: Makefile $(EXTRA_DEJAGNU_SITE_CONFIG)
	@echo 'Making a new site.exp file ...'
	@echo '## these variables are automatically generated by make ##' >site.tmp
	@echo '# Do not edit here.  If you wish to override these values' >>site.tmp
	@echo '# edit the last section' >>site.tmp
	@echo 'set srcdir "$(srcdir)"' >>site.tmp
	@echo "set objdir `pwd`" >>site.tmp
	@list='$(EXTRA_DEJAGNU_SITE_CONFIG)'; for f in $$list; do \
	  echo "## Begin content included from file $$f.  Do not modify. ##" \
	   && cat `test -f "$$f" || echo '$(srcdir)/'`$$f \
	   && echo "## End content included from file $$f. ##" \
	   || exit 1; \
	 done >> site.tmp
	@echo "## End of auto-generated content; you can edit from here. ##" >> site.tmp
	@if test -f site.exp; then \
	   sed -e '1,/^## End of auto-generated content.*##/d' site.exp >> site.tmp; \
	 fi
	@-rm -f site.bak
	@test ! -f site.exp || mv site.exp site.bak
	@mv site.tmp site.exp

distclean-DEJAGNU:
	-rm -f site.exp site.bak
	-l='$(DEJATOOL)'; for tool in $$l; do \
	  rm -f $$tool.sum $$tool.log; \
	done

distdir: $(DISTFILES)
	$(am__remove_distdir)
	test -d "$(distdir)" || mkdir "$(distdir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
	-test -n "$(am__skip_mode_fix)" \
	|| find "$(distdir)" -type d ! -perm -755 \
		-exec chmod u+rwx,go+rx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r "$(distdir)"
	@if test -z "$(am__skip_length_check)" && find "$(distdir)" -type f -print | \
	  grep '^...................................................................................................' 1>&2; then \
	  echo 'error: the above filenames are too long' 1>&2; \
	  exit 1; \
	else :; fi
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz
	$(am__post_remove_distdir)

dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
	$(am__post_remove_distdir)

dist-lzip: distdir
	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
	$(am__post_remove_distdir)

dist-xz: distdir
	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
	$(am__post_remove_distdir)

dist-tarZ: distdir
	@echo WARNING: "Support for distribution archives compressed with" \
		       "legacy program 'compress' is deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__post_remove_distdir)

dist-shar: distdir
	@echo WARNING: "Support for shar distribution archives is" \
	               "deprecated." >&2
	@echo WARNING: "It will be removed altogether in Automake 2.0" >&2
	shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz
	$(am__post_remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__post_remove_distdir)

dist dist-all:
	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
	$(am__post_remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.lz*) \
	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
	*.tar.xz*) \
	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir)
	chmod u+w $(distdir)
	mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
	chmod a-w $(distdir)
	test -d $(distdir)/_build || exit 0; \
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && am__cwd=`pwd` \
	  && $(am__cd) $(distdir)/_build/sub \
	  && ../../configure \
	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	    --srcdir=../.. --prefix="$$dc_install_base" \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
	  && cd "$$am__cwd" \
	  || exit 1
	$(am__post_remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
distuninstallcheck:
	@test -n '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: trying to run $@ with an empty' \
	       '$$(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	$(am__cd) '$(distuninstallcheck_dir)' || { \
	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
	  exit 1; \
	}; \
	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_PROGRAMS)
	$(MAKE) $(AM_MAKEFLAGS) check-DEJAGNU
check: check-am
all-am: Makefile $(INFO_DEPS) $(SCRIPTS) $(MANS) $(DATA) $(HEADERS) \
		all-local
installdirs:
	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(djlibexecdir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(baseboarddir)" "$(DESTDIR)$(commandsdir)" "$(DESTDIR)$(configdir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(includedir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-rm -f doc/$(am__dirstamp)
	-rm -f testsuite/libdejagnu/$(DEPDIR)/$(am__dirstamp)
	-rm -f testsuite/libdejagnu/$(am__dirstamp)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-aminfo clean-checkPROGRAMS clean-generic clean-local \
	mostlyclean-am

distclean: distclean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf testsuite/libdejagnu/$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-DEJAGNU distclean-compile \
	distclean-generic distclean-tags

dvi: dvi-am

dvi-am: $(DVIS)

html: html-am

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-baseboardDATA install-commandsDATA \
	install-configDATA install-includeHEADERS install-info-am \
	install-man install-pkgdataDATA

install-dvi: install-dvi-am

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(dvidir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(dvidir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
	done
install-exec-am: install-binSCRIPTS install-djlibexecSCRIPTS

install-html: install-html-am

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(htmldir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  $(am__strip_dir) \
	  d2=$$d$$p; \
	  if test -d "$$d2"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d2'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d2"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
	  else \
	    list2="$$list2 $$d2"; \
	  fi; \
	done; \
	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done; }
install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(infodir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(infodir)" || exit 1; \
	fi; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      echo "$$ifile"; \
	    else : ; fi; \
	  done; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
	@$(POST_INSTALL)
	@if $(am__can_run_installinfo); then \
	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man: install-man1

install-pdf: install-pdf-am

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(pdfdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(pdfdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-am

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(psdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(psdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -rf testsuite/libdejagnu/$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
	mostlyclean-generic mostlyclean-vti

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-baseboardDATA uninstall-binSCRIPTS \
	uninstall-commandsDATA uninstall-configDATA \
	uninstall-djlibexecSCRIPTS uninstall-dvi-am uninstall-html-am \
	uninstall-includeHEADERS uninstall-info-am uninstall-man \
	uninstall-pdf-am uninstall-pkgdataDATA uninstall-ps-am

uninstall-man: uninstall-man1

.MAKE: check-am install-am install-strip

.PHONY: CTAGS GTAGS TAGS all all-am all-local am--refresh check \
	check-DEJAGNU check-am clean clean-aminfo clean-checkPROGRAMS \
	clean-cscope clean-generic clean-local cscope cscopelist-am \
	ctags ctags-am dist dist-all dist-bzip2 dist-gzip dist-info \
	dist-lzip dist-shar dist-tarZ dist-xz dist-zip distcheck \
	distclean distclean-DEJAGNU distclean-compile \
	distclean-generic distclean-tags distcleancheck distdir \
	distuninstallcheck dvi dvi-am html html-am info info-am \
	install install-am install-baseboardDATA install-binSCRIPTS \
	install-commandsDATA install-configDATA install-data \
	install-data-am install-djlibexecSCRIPTS install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-includeHEADERS install-info \
	install-info-am install-man install-man1 install-pdf \
	install-pdf-am install-pkgdataDATA install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti mostlyclean \
	mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
	mostlyclean-vti pdf pdf-am ps ps-am tags tags-am uninstall \
	uninstall-am uninstall-baseboardDATA uninstall-binSCRIPTS \
	uninstall-commandsDATA uninstall-configDATA \
	uninstall-djlibexecSCRIPTS uninstall-dvi-am uninstall-html-am \
	uninstall-includeHEADERS uninstall-info-am uninstall-man \
	uninstall-man1 uninstall-pdf-am uninstall-pkgdataDATA \
	uninstall-ps-am

.PRECIOUS: Makefile

export DEJAGNU
export TAR_OPTIONS

clean-local: clean-local-check
.PHONY: clean-local-check
clean-local-check:
	-rm -rf testsuite/launcher.all/command/bin
	-rm -rf testsuite/launcher.all/command/share
	-rm -rf testsuite/report-card.all/onetest
	-rm -rf testsuite/report-card.all/passes

# Give a reassuring message so that users know the "build" worked.
all-local:
	@echo "Done. Now run 'make install'."

pip-install:
	pip3 install --upgrade -e $(top_srcdir)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: