2020-12-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vectorizable_condition): Only nullify cond_expr
	if we've created a new condition.  Don't nullify it if we've decided
	to keep it and then invert the result.

2020-12-31  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop-manip.c (create_lcssa_for_virtual_phi): Return
	the incoming virtual operand definition.
	(vect_do_peeling): When vectorizing an epilogue loop, handle the
	case in which the main loop has a virtual phi and the epilogue
	and scalar loops don't.  Restore an earlier comment about the
	update_ssa call.

2019-12-30  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks/stdint.h: New file.  Include _yvals.h
	then stdint-gcc.h.
	* config/t-vxworks: Arrange to install the stdint.h wrapper.
	* config.gcc (*-*-vxworks*): Add stdint-gcc.h to $extra_headers
	so it gets copied.  Set use_gcc_stdint to request _not_ crafting
	stdint.h through the common Makefile rules.

2019-12-30  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks/_yvals.h: New file.
	* config/vxworks/_yvals-wrapper.h: New file.
	* gcc/config/vxworks/math.h: Use it to wrap the VxWorks
	math.h header.
	* gcc/config/vxworks/complex.h: Likewise.
	* gcc/config/vxworks/setjmp.h: Likewise.
	* gcc/config/vxworks/inttypes.h: Likewise.
	* config.gcc (*-*-vxworks*): Add system header wrappers
	to extra_headers.
	(powerpc-*-vxworks*): Reuse the common extra_headers.

2019-12-30  Olivier Hainque  <hainque@adacore.com>

	* config/vxworks/_vxworks-versions.h: New file.
	* config.gcc (*-*-vxworks*): Add it to extra_headers.

2019-12-30  Olivier Hainque  <hainque@adacore.com>

	* config/t-vxworks: Rework the vxworks.o compilation
	rules to use $(COMPILE).

2019-12-30  Joel Brobecker  <brobecker@adacore.com>

	* config.gcc <*-*-vxworks*>: Add vxworks-c.o to c_target_objs
	and cxx_target_objs. Set target_has_targetcm to "yes". Add
	vxworks-predef.h to extra_headers.
	* config/t-vxworks (vxworks-c.o): New target.
	* config/vxworks-c.c: New file.
	* config/vxworks/vxworks-predef.h: New file.

2019-12-30  Alexandre Oliva  <oliva@adacore.com>
            Olivier Hainque  <hainque@adacore.com>

	* config/vx-common.h (WCHAR_TYPE_SIZE): 32 on VxWorks 7.
	(WCHAR_TYPE): Pick accordingly.
	(WINT_TYPE_SIZE): Define in terms of WCHAR_TYPE_SIZE.
	(WINT_TYPE): Define in terms of WCHAR_TYPE.

2019-12-30  Olivier Hainque  <hainque@adacore.com>

	* config/vx-common.h: Minor reorganization and add
	sectioning comments.

2019-12-30  Doug Rupp  <rupp@adacore.com>

	* config/rs6000/vxworks.h (STARTFILE_PREFIX_SPEC): Define.

2019-12-30  Olivier Hainque  <hainque@adacore.com>
            Jerome Lambourg  <labourg@adacore.com>

	* config/t-vxworks: Arrange to alter/restore glimits.h
	before/after stmp-int-hdrs, so it uses a different macro
	name to protect itself against recursive inclusions.

2019-12-30  Peter Bergner <bergner@linux.ibm.com>

	PR target/92923
	* config/rs6000/rs6000-builtin.def (VAND, VANDC, VNOR, VOR, VXOR):
	Delete.
	(EQV_V16QI_UNS, EQV_V8HI_UNS, EQV_V4SI_UNS, EQV_V2DI_UNS, EQV_V1TI_UNS,
	NAND_V16QI_UNS, NAND_V8HI_UNS, NAND_V4SI_UNS, NAND_V2DI_UNS,
	NAND_V1TI_UNS, ORC_V16QI_UNS, ORC_V8HI_UNS, ORC_V4SI_UNS, ORC_V2DI_UNS,
	ORC_V1TI_UNS, VAND_V16QI_UNS, VAND_V16QI, VAND_V8HI_UNS, VAND_V8HI,
	VAND_V4SI_UNS, VAND_V4SI, VAND_V2DI_UNS, VAND_V2DI, VAND_V4SF,
	VAND_V2DF, VANDC_V16QI_UNS, VANDC_V16QI, VANDC_V8HI_UNS, VANDC_V8HI,
	VANDC_V4SI_UNS, VANDC_V4SI, VANDC_V2DI_UNS, VANDC_V2DI, VANDC_V4SF,
	VANDC_V2DF, VNOR_V16QI_UNS, VNOR_V16QI, VNOR_V8HI_UNS, VNOR_V8HI,
	VNOR_V4SI_UNS, VNOR_V4SI, VNOR_V2DI_UNS, VNOR_V2DI, VNOR_V4SF,
	VNOR_V2DF, VOR_V16QI_UNS, VOR_V16QI, VOR_V8HI_UNS, VOR_V8HI,
	VOR_V4SI_UNS, VOR_V4SI, VOR_V2DI_UNS, VOR_V2DI, VOR_V4SF, VOR_V2DF,
	VXOR_V16QI_UNS, VXOR_V16QI, VXOR_V8HI_UNS, VXOR_V8HI,
	VXOR_V4SI_UNS, VXOR_V4SI, VXOR_V2DI_UNS, VXOR_V2DI, VXOR_V4SF,
	VXOR_V2DF): Add definitions.
	* config/rs6000/rs6000-call.c (altivec_overloaded_builtins)
	<ALTIVEC_BUILTIN_VAND, ALTIVEC_BUILTIN_VANDC, ALTIVEC_BUILTIN_VNOR,
	ALTIVEC_BUILTIN_VOR, ALTIVEC_BUILTIN_VXOR>: Remove.
	<ALTIVEC_BUILTIN_VAND_V4SF, ALTIVEC_BUILTIN_VAND_V2DF,
	ALTIVEC_BUILTIN_VAND_V2DI, ALTIVEC_BUILTIN_VAND_V2DI_UNS,
	ALTIVEC_BUILTIN_VAND_V4SI_UNS, ALTIVEC_BUILTIN_VAND_V4SI,
	ALTIVEC_BUILTIN_VAND_V8HI_UNS, ALTIVEC_BUILTIN_VAND_V8HI,
	ALTIVEC_BUILTIN_VAND_V16QI, ALTIVEC_BUILTIN_VAND_V16QI_UNS,
	ALTIVEC_BUILTIN_VANDC_V4SF, ALTIVEC_BUILTIN_VANDC_V2DF,
	ALTIVEC_BUILTIN_VANDC_V2DI, ALTIVEC_BUILTIN_VANDC_V2DI_UNS,
	ALTIVEC_BUILTIN_VANDC_V4SI_UNS, ALTIVEC_BUILTIN_VANDC_V4SI,
	ALTIVEC_BUILTIN_VANDC_V8HI_UNS, ALTIVEC_BUILTIN_VANDC_V8HI,
	ALTIVEC_BUILTIN_VANDC_V16QI, ALTIVEC_BUILTIN_VANDC_V16QI_UNS,
	ALTIVEC_BUILTIN_VNOR_V4SF, ALTIVEC_BUILTIN_VNOR_V2DF,
	ALTIVEC_BUILTIN_VNOR_V2DI, ALTIVEC_BUILTIN_VNOR_V2DI_UNS,
	ALTIVEC_BUILTIN_VNOR_V4SI, ALTIVEC_BUILTIN_VNOR_V4SI_UNS,
	ALTIVEC_BUILTIN_VNOR_V8HI, ALTIVEC_BUILTIN_VNOR_V8HI_UNS,
	ALTIVEC_BUILTIN_VNOR_V16QI, ALTIVEC_BUILTIN_VNOR_V16QI_UNS,
	ALTIVEC_BUILTIN_VOR_V4SF, ALTIVEC_BUILTIN_VOR_V2DF,
	ALTIVEC_BUILTIN_VOR_V2DI, ALTIVEC_BUILTIN_VOR_V2DI_UNS,
	ALTIVEC_BUILTIN_VOR_V4SI_UNS, ALTIVEC_BUILTIN_VOR_V4SI,
	ALTIVEC_BUILTIN_VOR_V8HI_UNS, ALTIVEC_BUILTIN_VOR_V8HI,
	ALTIVEC_BUILTIN_VOR_V16QI, ALTIVEC_BUILTIN_VOR_V16QI_UNS,
	ALTIVEC_BUILTIN_VXOR_V4SF, ALTIVEC_BUILTIN_VXOR_V2DF,
	ALTIVEC_BUILTIN_VXOR_V2DI, ALTIVEC_BUILTIN_VXOR_V2DI_UNS,
	ALTIVEC_BUILTIN_VXOR_V4SI_UNS, ALTIVEC_BUILTIN_VXOR_V4SI,
	ALTIVEC_BUILTIN_VXOR_V8HI, ALTIVEC_BUILTIN_VXOR_V8HI_UNS,
	ALTIVEC_BUILTIN_VXOR_V16QI, ALTIVEC_BUILTIN_VXOR_V16QI_UNS>: Add
	definitions.
	<P8V_BUILTIN_EQV_V16QI, P8V_BUILTIN_EQV_V8HI, P8V_BUILTIN_EQV_V4SI,
	P8V_BUILTIN_EQV_V2DI, P8V_BUILTIN_NAND_V16QI, P8V_BUILTIN_NAND_V8HI,
	P8V_BUILTIN_NAND_V4SI, P8V_BUILTIN_NAND_V2DI, P8V_BUILTIN_ORC_V16QI,
	P8V_BUILTIN_ORC_V8HI, P8V_BUILTIN_ORC_V4SI,
	P8V_BUILTIN_ORC_V2DI>: Change unsigned usages to use the new *_UNS
	definition names.
	(rs6000_gimple_fold_builtin) <ALTIVEC_BUILTIN_VAND_V16QI_UNS,
	ALTIVEC_BUILTIN_VAND_V16QI, ALTIVEC_BUILTIN_VAND_V8HI_UNS,
	ALTIVEC_BUILTIN_VAND_V8HI, ALTIVEC_BUILTIN_VAND_V4SI_UNS,
	ALTIVEC_BUILTIN_VAND_V4SI, ALTIVEC_BUILTIN_VAND_V2DI_UNS,
	ALTIVEC_BUILTIN_VAND_V2DI, ALTIVEC_BUILTIN_VAND_V4SF,
	ALTIVEC_BUILTIN_VAND_V2DF, ALTIVEC_BUILTIN_VANDC_V16QI_UNS,
	ALTIVEC_BUILTIN_VANDC_V16QI, ALTIVEC_BUILTIN_VANDC_V8HI_UNS,
	ALTIVEC_BUILTIN_VANDC_V8HI, ALTIVEC_BUILTIN_VANDC_V4SI_UNS,
	ALTIVEC_BUILTIN_VANDC_V4SI, ALTIVEC_BUILTIN_VANDC_V2DI_UNS,
	ALTIVEC_BUILTIN_VANDC_V2DI, ALTIVEC_BUILTIN_VANDC_V4SF,
	ALTIVEC_BUILTIN_VANDC_V2DF, P8V_BUILTIN_NAND_V16QI_UNS,
	P8V_BUILTIN_NAND_V8HI_UNS, P8V_BUILTIN_NAND_V4SI_UNS,
	P8V_BUILTIN_NAND_V2DI_UNS, P8V_BUILTIN_NAND_V2DI,
	ALTIVEC_BUILTIN_VOR_V16QI_UNS, ALTIVEC_BUILTIN_VOR_V16QI,
	ALTIVEC_BUILTIN_VOR_V8HI_UNS, ALTIVEC_BUILTIN_VOR_V8HI,
	ALTIVEC_BUILTIN_VOR_V4SI_UNS, ALTIVEC_BUILTIN_VOR_V4SI,
	ALTIVEC_BUILTIN_VOR_V2DI_UNS, ALTIVEC_BUILTIN_VOR_V2DI,
	ALTIVEC_BUILTIN_VOR_V4SF, ALTIVEC_BUILTIN_VOR_V2DF,
	P8V_BUILTIN_ORC_V16QI_UNS, P8V_BUILTIN_ORC_V8HI_UNS,
	P8V_BUILTIN_ORC_V4SI_UNS, P8V_BUILTIN_ORC_V2DI_UNS,
	P8V_BUILTIN_ORC_V2DI, ALTIVEC_BUILTIN_VXOR_V16QI_UNS,
	ALTIVEC_BUILTIN_VXOR_V16QI, ALTIVEC_BUILTIN_VXOR_V8HI_UNS,
	ALTIVEC_BUILTIN_VXOR_V8HI, ALTIVEC_BUILTIN_VXOR_V4SI_UNS,
	ALTIVEC_BUILTIN_VXOR_V4SI, ALTIVEC_BUILTIN_VXOR_V2DI_UNS,
	ALTIVEC_BUILTIN_VXOR_V2DI, ALTIVEC_BUILTIN_VXOR_V4SF,
	ALTIVEC_BUILTIN_VXOR_V2DF, ALTIVEC_BUILTIN_VNOR_V16QI_UNS,
	ALTIVEC_BUILTIN_VNOR_V16QI, ALTIVEC_BUILTIN_VNOR_V8HI_UNS,
	ALTIVEC_BUILTIN_VNOR_V8HI, ALTIVEC_BUILTIN_VNOR_V4SI_UNS,
	ALTIVEC_BUILTIN_VNOR_V4SI, ALTIVEC_BUILTIN_VNOR_V2DI_UNS,
	ALTIVEC_BUILTIN_VNOR_V2DI, ALTIVEC_BUILTIN_VNOR_V4SF,
	ALTIVEC_BUILTIN_VNOR_V2DF>: Use new definition names.
	(builtin_function_type) <ALTIVEC_BUILTIN_VAND_V16QI_UNS,
	ALTIVEC_BUILTIN_VAND_V8HI_UNS, ALTIVEC_BUILTIN_VAND_V4SI_UNS,
	ALTIVEC_BUILTIN_VAND_V2DI_UNS, ALTIVEC_BUILTIN_VANDC_V16QI_UNS,
	ALTIVEC_BUILTIN_VANDC_V8HI_UNS, ALTIVEC_BUILTIN_VANDC_V4SI_UNS,
	ALTIVEC_BUILTIN_VANDC_V2DI_UNS, ALTIVEC_BUILTIN_VNOR_V16QI_UNS,
	ALTIVEC_BUILTIN_VNOR_V8HI_UNS, ALTIVEC_BUILTIN_VNOR_V4SI_UNS,
	ALTIVEC_BUILTIN_VNOR_V2DI_UNS, ALTIVEC_BUILTIN_VOR_V16QI_UNS,
	ALTIVEC_BUILTIN_VOR_V8HI_UNS, ALTIVEC_BUILTIN_VOR_V4SI_UNS,
	ALTIVEC_BUILTIN_VOR_V2DI_UNS, ALTIVEC_BUILTIN_VXOR_V16QI_UNS,
	ALTIVEC_BUILTIN_VXOR_V8HI_UNS, ALTIVEC_BUILTIN_VXOR_V4SI_UNS,
	ALTIVEC_BUILTIN_VXOR_V2DI_UNS, P8V_BUILTIN_EQV_V16QI_UNS,
	P8V_BUILTIN_EQV_V8HI_UNS, P8V_BUILTIN_EQV_V4SI_UNS,
	P8V_BUILTIN_EQV_V2DI_UNS, P8V_BUILTIN_EQV_V1TI_UNS,
	P8V_BUILTIN_NAND_V16QI_UNS, P8V_BUILTIN_NAND_V8HI_UNS,
	P8V_BUILTIN_NAND_V4SI_UNS, P8V_BUILTIN_NAND_V2DI_UNS,
	P8V_BUILTIN_NAND_V1TI_UNS, P8V_BUILTIN_ORC_V16QI_UNS,
	P8V_BUILTIN_ORC_V8HI_UNS, P8V_BUILTIN_ORC_V4SI_UNS,
	P8V_BUILTIN_ORC_V2DI_UNS, P8V_BUILTIN_ORC_V1TI_UNS>: Handle unsigned
	builtins.

2019-12-29  Jakub Jelinek  <jakub@redhat.com>

	PR target/93078
	* config/i386/i386-builtins.c (ix86_builtin_vectorized_function):
	Remove CASE_CFN_RINT handling.
	* config/i386/i386-builtin.def (IX86_BUILTIN_RINTPD,
	IX86_BUILTIN_RINTPS, IX86_BUILTIN_RINTPD256, IX86_BUILTIN_RINTPS256):
	Remove.
	* config/i386/sse.md (nearbyint<mode>2, rint<mode>2): New expanders
	with VF iterator.

2019-12-29  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vect_get_strided_load_store_ops): Copy
	DR_STEP before gimplifying it.

2019-12-29  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vectorizable_condition): For extract-last
	reductions, check that the target supports the required comparison
	operation.

2019-12-27  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (V_INT_CONTAINER): Fix VNx2SF entry.

2019-12-27  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vectorizable_reduction): Check whether the
	target supports the required VEC_COND_EXPR operation before
	allowing the fallback handling of masked fold-left reductions.

2019-12-24  Jiufu Guo  <guojiufu@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal): Enable
	-fweb and -frename-registers with -funroll-loops

2019-12-22  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/invoke.texi (-flto): Use "compile time" as a noun.

2019-12-21  Martin Jambor  <mjambor@suse.cz>

	PR ipa/93015
	* ipa-cp.c (ipcp_store_vr_results): Check that info exists

2019-12-20   Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (cint34_operand): Use
	SIGNED_INTEGER_34BIT_P macro.
	* config/rs6000/rs6000.c (num_insns_constant_gpr): Use the
	SIGNED_INTEGER_16BIT_P and SIGNED_INTEGER_34BIT_P macros.
	(address_to_insn_form): Use the SIGNED_INTEGER_16BIT_P and
	SIGNED_INTEGER_34BIT_P macros.
	* config/rs6000/rs6000.h (SIGNED_INTEGER_NBIT_P): New macro.
	(SIGNED_INTEGER_16BIT_P): Rename SIGNED_16BIT_OFFSET_P to be
	SIGNED_INTEGER_34BIT_P.
	(SIGNED_INTEGER_34BIT_P): Rename SIGNED_34BIT_OFFSET_P to be
	SIGNED_INTEGER_34BIT_P.

2019-12-20  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* doc/sourcebuild.texi
	(arm_v8_2a_bf16_neon_ok): Document new target supports option.
	(arm_v8_2a_i8mm_ok): Likewise.

2019-12-20  Jakub Jelinek  <jakub@redhat.com>

	PR target/92841
	* config/i386/i386.md (*stack_protect_set_3): For pic_32bit_operand
	always use lea{q}, no matter what value which_alternative has.

	PR target/93002
	* config/i386/i386.md (dec reg; cmp $-1, reg; jne lab): New
	define_peephole2.

2019-12-19  Julian Brown  <julian@codesourcery.com>

	* gimplify.c (gimplify_omp_var_data): Add GOVD_MAP_HAS_ATTACHMENTS.
	(insert_struct_comp_map): Support derived-type member mappings
	for arrays with descriptors which use GOMP_MAP_TO_PSET.  Support
	GOMP_MAP_ATTACH_DETACH.
	(gimplify_scan_omp_clauses): Tidy up OACC_ENTER_DATA/OACC_EXIT_DATA
	mappings.  Handle attach/detach clauses and component references.
	(gimplify_adjust_omp_clauses_1): Skip adjustments for explicit
	attach/detach clauses.
	(gimplify_omp_target_update): Handle struct mappings and finalize for
	detach operations.
	* omp-low.c (lower_omp_target): Support GOMP_MAP_ATTACH,
	GOMP_MAP_DETACH, GOMP_MAP_FORCE_DETACH.
	* tree-pretty-print.c (dump_omp_clause): Likewise, plus
	GOMP_MAP_ATTACH_DETACH.

2019-12-19  Julian Brown  <julian@codesourcery.com>

	* gimplify.c (insert_struct_comp_map, extract_base_bit_offset): New.
	(gimplify_scan_omp_clauses): Outline duplicated code into calls to
	above two functions.

2019-12-19  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/92905
	* lra-constraints.c (process_alt_operands): Check offmemok when
	processing preferred_reload_class.

2019-12-19  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md
	(<convop><VEC_ALL1REG_INT_ALT:mode><VEC_ALL1REG_INT_MODE:mode>2<exec>):
	Change input predcate to gcn_alu_operand.
	(extend<VEC_ALL1REG_INT_ALT:mode><VEC_ALL1REG_INT_MODE:mode>2<exec>):
	Likewise.
	(truncv64di<mode>2): Likewise.
	(truncv64di<mode>2_exec): Likewise.
	(<convop><mode>v64di2): Likewise.
	(<convop><mode>v64di2_exec): Likewise.

2019-12-19  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (*plus_carry_dpp_shr_<mode>): Rename to ...
	(*plus_carry_dpp_shr_v64si): ... this, and replace all
	VEC_1REG_INT_MODE with V64SI.

2019-12-19  David Malcolm  <dmalcolm@redhat.com>

	* hash-map-tests.c (selftest::test_map_of_int_to_strings): New
	selftest.
	(selftest::hash_map_tests_c_tests): Call it.

2019-12-19  David Malcolm  <dmalcolm@redhat.com>

	* gimple-predict.h (gimple_predict_predictor): Make "gs" param
	const.
	(gimple_predict_outcome): Likewise.
	* gimple-pretty-print.c (do_niy): Likewise.
	(dump_unary_rhs): Likewise.
	(dump_binary_rhs): Likewise.
	(dump_ternary_rhs): Likewise.
	(dump_gimple_assign): Likewise.
	(dump_gimple_return): Likewise.
	(dump_gimple_call_args): Likewise.
	(pp_points_to_solution): Make "pt" param const.
	(dump_gimple_call): Make "gs" param const.
	(dump_gimple_switch): Likewise.
	(dump_gimple_cond): Likewise.
	(dump_gimple_label): Likewise.
	(dump_gimple_goto): Likewise.
	(dump_gimple_bind): Likewise.
	(dump_gimple_try): Likewise.
	(dump_gimple_catch): Likewise.
	(dump_gimple_eh_filter): Likewise.
	(dump_gimple_eh_must_not_throw): Likewise.
	(dump_gimple_eh_else): Likewise.
	(dump_gimple_resx): Likewise.
	(dump_gimple_eh_dispatch): Likewise.
	(dump_gimple_debug): Likewise.
	(dump_gimple_omp_for): Likewise.
	(dump_gimple_omp_continue): Likewise.
	(dump_gimple_omp_single): Likewise.
	(dump_gimple_omp_taskgroup): Likewise.
	(dump_gimple_omp_target): Likewise.
	(dump_gimple_omp_teams): Likewise.
	(dump_gimple_omp_sections): Likewise.
	(dump_gimple_omp_block): Likewise.
	(dump_gimple_omp_critical): Likewise.
	(dump_gimple_omp_ordered): Likewise.
	(dump_gimple_omp_scan): Likewise.
	(dump_gimple_omp_return): Likewise.
	(dump_gimple_transaction): Likewise.
	(dump_gimple_asm): Likewise.
	(dump_gimple_phi): Make "phi" param const.
	(dump_gimple_omp_parallel): Make "gs" param const.
	(dump_gimple_omp_task): Likewise.
	(dump_gimple_omp_atomic_load): Likewise.
	(dump_gimple_omp_atomic_store): Likewise.
	(dump_gimple_mem_ops): Likewise.
	(pp_gimple_stmt_1): Likewise.  Add "const" to the various as_a <>
	casts throughout.
	* gimple-pretty-print.h (gimple_stmt_1): Make gimple * param const.
	* gimple.h (is_a_helper <const gdebug *>::test): New.
	(is_a_helper <const ggoto *>::test): New.
	(is_a_helper <const glabel *>::test): New.
	(is_a_helper <const geh_else *>::test): New.
	(is_a_helper <const geh_mnt *>::test): New.
	(is_a_helper <const gswitch *>::test): New.
	(is_a_helper <const gtry *>::test): New.
	(is_a_helper <const greturn *>::test): New.
	(gimple_call_tail_p): Make param const.
	(gimple_call_return_slot_opt_p): Likewise.
	(gimple_call_va_arg_pack_p): Likewise.
	(gimple_call_use_set): Add const overload.
	(gimple_call_clobber_set): Likewise.
	(gimple_has_lhs): Make param const.
	(gimple_bind_body): Likewise.
	(gimple_catch_handler): Likewise.
	(gimple_eh_filter_failure): Likewise.
	(gimple_eh_must_not_throw_fndecl): Likewise.
	(gimple_eh_else_n_body): Likewise.
	(gimple_eh_else_e_body): Likewise.
	(gimple_try_eval): Likewise.
	(gimple_try_cleanup): Likewise.
	(gimple_phi_arg): Add const overload.
	(gimple_phi_arg_def): Make param const.
	(gimple_phi_arg_edge): Likewise.
	(gimple_phi_arg_location): Likewise.
	(gimple_phi_arg_has_location): Likewise.
	(gimple_debug_bind_get_var): Likewise.
	(gimple_debug_bind_get_value): Likewise.
	(gimple_debug_source_bind_get_var): Likewise.
	(gimple_debug_source_bind_get_value): Likewise.
	(gimple_omp_body): Likewise.
	(gimple_omp_for_collapse): Likewise.
	(gimple_omp_for_pre_body): Likewise.
	(gimple_transaction_body): Likewise.
	* tree-eh.c (lookup_stmt_eh_lp_fn): Make param "t" const.
	(lookup_stmt_eh_lp): Likewise.
	* tree-eh.h (lookup_stmt_eh_lp_fn): Make param const.
	(lookup_stmt_eh_lp): Likewise.
	* tree-ssa-alias.h (pt_solution_empty_p): Make param const.
	* tree-ssa-structalias.c (pt_solution_empty_p): Likewise.

2019-12-19  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_simd_valid_immediate): When
	handling partial SVE vectors, use the container mode rather than
	the element mode if the constant isn't a single-element duplicate.
	* config/aarch64/aarch64-sve.md (@aarch64_sve_reinterpret<mode>):
	Check targetm.can_change_mode_class instead of BYTES_BIG_ENDIAN.

2019-12-19  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (addv64si3<exec_clobber>): Rename to ...
	(add<mode>3<exec_clobber>): ... this, and use VEC_ALL1REG_INT_MODE.
	(addv64si3_dup<exec_clobber>): Rename to ...
	(add<mode>3_dup<exec_clobber>): ... this, and use VEC_ALL1REG_INT_MODE.
	(subv64si3<exec_clobber>): Rename to ...
	(sub<mode>3<exec_clobber>): ... this, and use VEC_ALL1REG_INT_MODE.

2019-12-19  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_can_change_mode_class):
	Don't allow changes between partial SVE modes and other kinds
	of mode.  Don't allow changes between two partial SVE modes
	if they have different container or element sizes.

2019-12-19  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_function_value_1): New function,
	split out from...
	(aarch64_function_value): ...here.  Handle partial SVE modes by
	pretending that they have the associated/traditional integer mode,
	then wrap the result in the real mode.
	(aarch64_layout_arg): Take an orig_mode argument and pass it to
	aarch64_function_arg_alignment.  Handle partial SVE modes analogously
	to aarch64_function_value.
	(aarch64_function_arg): Update call accordingly.
	(aarch64_function_arg_advance): Likewise.

2019-12-19  Jan Hubicka  <hubicka@ucw.cz>
	    Xi Ruoyao  <xry111@mengyan1223.wang>

	* cgraph.c (cgraph_node_cannot_be_local_p_1): Prevent targets of
	symver attributes to be localized.
	* ipa-visibility.c (cgraph_externally_visible_p,
	varpool_node::externally_visible_p): Likewise.
	* symtab.c (symtab_node::verify_base): Check visibility of symbol
	versions.

2019-12-19  Jan Hubicka  <hubicka@ucw.cz>
	    Luo Xiong Hu  <luoxhu@linux.ibm.com

	* ipa-fnsummary.h (ipa_size_summary): Remove copy consturctor.
	(ipa_size_summary_t): Add duplicate method; move to heap.
	* ipa-fnsumary.c (ipa_fn_summary_alloc): Fix allocation.

2019-12-19  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/92794
	* ipa-cp.c (self_recursive_agg_pass_through_p): New function.
	(intersect_with_plats): Use error_mark_node as place holder
	when aggregate jump function is simple pass-through for
	self-recursive call.
	(intersect_with_agg_replacements): Likewise.
	(intersect_aggregates_with_edge): Likewise.
	(find_aggregate_values_for_callers_subset): Likewise.

2019-12-18  David Malcolm  <dmalcolm@redhat.com>

	* common.opt (fdiagnostics-show-cwe): Add.
	* diagnostic-core.h (class diagnostic_metadata): New forward decl.
	(warning_at): Add overload taking a const diagnostic_metadata &.
	(emit_diagnostic_valist): Add overload taking a
	const diagnostic_metadata *.
	* diagnostic-format-json.cc: Include "diagnostic-metadata.h".
	(json_from_metadata): New function.
	(json_end_diagnostic): Call it to add "metadata" child for
	diagnostics with metadata.
	(diagnostic_output_format_init): Clear context->show_cwe.
	* diagnostic-metadata.h: New file.
	* diagnostic.c: Include "diagnostic-metadata.h".
	(diagnostic_impl): Add const diagnostic_metadata * param.
	(diagnostic_n_impl): Likewise.
	(diagnostic_initialize): Initialize context->show_cwe.
	(diagnostic_set_info_translated): Initialize diagnostic->metadata.
	(get_cwe_url): New function.
	(print_any_cwe): New function.
	(diagnostic_report_diagnostic): Call print_any_cwe if the
	diagnostic has non-NULL metadata.
	(emit_diagnostic): Pass NULL as the metadata in the call to
	diagnostic_impl.
	(emit_diagnostic_valist): Likewise.
	(emit_diagnostic_valist): New overload taking a
	const diagnostic_metadata *.
	(inform): Pass NULL as the metadata in the call to
	diagnostic_impl.
	(inform_n): Likewise for diagnostic_n_impl.
	(warning): Likewise.
	(warning_at): Likewise.  Add overload that takes a
	const diagnostic_metadata &.
	(warning_n): Pass NULL as the metadata in the call to
	diagnostic_n_impl.
	(pedwarn): Likewise for diagnostic_impl.
	(permerror): Likewise.
	(error): Likewise.
	(error_n): Likewise.
	(error_at): Likewise.
	(sorry): Likewise.
	(sorry_at): Likewise.
	(fatal_error): Likewise.
	(internal_error): Likewise.
	(internal_error_no_backtrace): Likewise.
	* diagnostic.h (diagnostic_info::metadata): New field.
	(diagnostic_context::show_cwe): New field.
	* doc/invoke.texi (-fno-diagnostics-show-cwe): New option.
	* opts.c (common_handle_option): Handle OPT_fdiagnostics_show_cwe.
	* toplev.c (general_init): Initialize global_dc->show_cwe.

2019-12-19  Julian Brown  <julian@codesourcery.com>
	    Maciej W. Rozycki  <macro@codesourcery.com>
	    Tobias Burnus  <tobias@codesourcery.com>
	    Thomas Schwinge  <thomas@codesourcery.com>

	* omp-low.c (lower_omp_target): Support GOMP_MAP_NO_ALLOC.
	* tree-pretty-print.c (dump_omp_clause): Likewise.

2019-12-18  Eric Botcazou  <ebotcazou@adacore.com>

	* ira.c (ira): Use simple LRA algorithm when not optimizing.

2019-12-18  Thomas Schwinge  <thomas@codesourcery.com>

	* gimplify.c (gimplify_omp_target_update): Elaborate 'exit data'
	'finalize' handling.

2019-12-18  Tobias Burnus  <tobias@codesourcery.com>

	PR middle-end/86416
	*  Makefile.in (CFLAGS-lto-streamer-in.o): Pass target_noncanonical on.
	* lto-streamer-in.c (lto_input_mode_table): Improve unsupported-mode
	diagnostic.

2019-12-18  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64-cores.def: 
	("cortex-a76ae"): Use neoversen1 tuning.
	("cortex-a77"): Likewise.
	("cortex-a65"): Use cortexa53 scheduler.
	("cortex-a65ae"): Likewise.
	("neoverse-e1"): Use cortexa73 tuning.

2019-12-18  Martin Jambor  <mjambor@suse.cz>

	PR ipa/92971
	* ipa-cp.c (cgraph_edge_brings_all_agg_vals_for_node): Fix
	definition of values, release memory on exit.

2019-12-17  Jan Hubicka  <hubicka@ucw.cz>
	    Martin Jambor  <mjambor@suse.cz>

	* ipa-param-manipulation.h (get_original_index): Declare.
	* ipa-param-manipulation.c (ipa_param_adjustments::get_original_index):
	New member function.
	* ipa-prop.c (ipcp_get_parm_bits): New function.
	* ipa-prop.h (ipcp_get_parm_bits): Declare.
	* tree-ssa-ccp.c: Include cgraph.h, alloc-pool.h, symbol-summary.h,
	ipa-utils.h and ipa-prop.h
	(get_default_value): Use ipcp_get_parm_bits.

2019-12-18  Jakub Jelinek  <jakub@redhat.com>

	PR lto/92972
	* lto-wrapper.c (merge_and_complain): Use just "-fno-pie" instead of
	big ? "-fno-pie" : "-fno-pie".  Formatting fixes.  Fix comment typo.

2019-12-17  Martin Sebor  <msebor@redhat.com>

	PR c++/61339
	* doc/invoke.texi (-Wmismatched-tags, -Wredundant-tags): Document
	new C++ options.

2019-12-17  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (num_insns_constant_gpr): Return 1 if the
	constant can be loaded with PLI if -mcpu=future.
	* config/rs6000/rs6000.md (add<mode>3): Add alternative to
	generate PADDI for 34-bit constants if -mcpu=future.
	(movdi_internal64): Add alternative to use PLI to load up 34-bit
	constants if -mcpu=future.
	(movsi_internal1): Add alternative to use PLI to load up 32-bit
	constants if -mcpu=future.
	* config/rs6000/predicates.md (add_operand): Allow eI constants.

2019-12-17  Jakub Jelinek  <jakub@redhat.com>

	PR target/92841
	* config/i386/i386.md (@stack_protect_set_1_<mode>,
	@stack_protect_test_1_<mode>): Use output_asm_insn.
	(*stack_protect_set_2_<mode>, *stack_protect_set_3): New define_insns
	and corresponding define_peephole2s.

2019-12-17  Jan Hubicka  <hubicka@ucw.cz>

	* symtab.c (symtab_node::get_partitioning_class): Aliases of external
	symbols are external.

2019-12-17  Christophe Lyon  <christophe.lyon@linaro.org>

	* config/arm/arm-protos.h (thumb1_gen_const_int): Add new prototype.
	* config/arm/arm.c (arm_option_check_internal): Remove restriction
	on MOVT for -mpure-code.
	(thumb1_gen_const_int): New function.
	(thumb1_legitimate_address_p): Support -mpure-code.
	(thumb1_rtx_costs): Likewise.
	(thumb1_size_rtx_costs): Likewise.
	(arm_thumb1_mi_thunk): Likewise.
	* config/arm/arm.h (CASE_VECTOR_PC_RELATIVE): Likewise.
	* config/arm/thumb1.md (thumb1_movsi_symbol_ref): New.
	(*thumb1_movhf): Support -mpure-code.
	* doc/invoke.texi (-mpure-code): Remove restriction on MOVT.

2019-12-17  Andrew Stubbs  <ams@codesourcery.com>

	* tree-vect-loop.c (vect_create_epilog_for_reduction): Mention pr92772
	in the comments.

2019-12-17  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (extract_last_<mode>): New expander.
	(fold_extract_last_<mode>): New expander.

2019-12-17  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.h (CLZ_DEFINED_VALUE_AT_ZERO): Define.
	(CTZ_DEFINED_VALUE_AT_ZERO): Define.
	* config/gcn/gcn.md (s_mnemonic): Add clz and ctz.
	(expander): Likewise.
	(countzeros): New code iterator.
	(<expander>si2): New insn pattern.
	(<expander>di2): New insn pattern.

2019-12-17  Jakub Jelinek  <jakub@redhat.com>

	PR target/92962
	* common/config/i386/i386-common.c (processor_alias_table): Formatting
	fixes.
	* doc/invoke.texi (bdver3, bdver4, znver1): Add missing closing paren.
	(znver2): Likewise.  Add RDPID and WBNOINVD, remove spurious comma
	before CLWB.

2019-12-17  Hongyu Wang  <hongyu.wang@intel.com>

	PR target/92651
	* config/i386/i386.h (TARGET_EXPAND_ABS): New macro.
	* config/i386/x86-tune.def (X86_TUNE_EXPAND_ABS): New.
	* config/i386/i386.md (abs<SWI48x>2): New define_expand.

2019-12-17  H.J. Lu  <hjl.tools@gmail.com>

	PR target/92807
	* config/i386/i386.c (ix86_lea_outperforms): Check !TARGET_BONNELL.
	(ix86_avoid_lea_for_addr): When not optimizing for Bonnell, use add
	for a = a + b and a = b + a.

2019-12-16  Martin Sebor  <msebor@redhat.com>

	PR middle-end/92952
	* builtins.c (compute_objsize): Adjust offset by the array low bound.

2019-12-16  David Malcolm  <dmalcolm@redhat.com>

	* pretty-print.c (pp_write_text_as_html_like_dot_to_stream): New
	function.
	* pretty-print.h (pp_write_text_as_html_like_dot_to_stream): New decl.

2019-12-16  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (movsi_to_cr_one): Use CR0_REGNO instead of
	hardcoding the (old, expired) register number.
	(*mtcrfsi): Ditto.

2019-12-16  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config.gcc: s/msp430*-*-*/msp430-*-*.
	Handle msp430-*-elfbare.
	* config/msp430/msp430-devices.c (TARGET_SUBDIR): Define.
	(_MSPMKSTR): Define.
	(__MSPMKSTR): Define.
	(rest_of_devices_path): Use TARGET_SUBDIR value in string.
	* config/msp430/msp430.c (msp430_option_override): Error if
	-fuse-cxa-atexit is used when it has been disabled at configure time.
	* config/msp430/t-msp430: Define TARGET_SUBDIR when building
	msp430-devices.o.
	* doc/install.texi: Document msp430-*-elf and msp430-*-elfbare.
	* doc/invoke.texi: Update documentation about which path devices.csv is
	searched for.

2019-12-16  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/92950
	* config/s390/vector.md ("mov<mode>" for V_8): Replace lh, lhy,
	and lhrl with llc.

2019-12-14  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (attribute access): Correct typos.

2019-12-14  Jakub Jelinek  <jakub@redhat.com>

	PR ipa/92357
	* ipa-fnsummary.c (ipa_fn_summary_write): Use
	lto_symtab_encoder_iterator with lsei_start_function_in_partition and
	lsei_next_function_in_partition instead of walking all cgraph nodes
	in encoder.

	PR tree-optimization/92930
	* ipa-pure-const.c (special_builtin_state): Don't handle
	BUILT_IN_APPLY.  Formatting fixes.
	(check_call): Formatting fixes.

2019-12-14  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h (DARWIN_EXTRA_SPECS): Add new
	bundle spec. (DARWIN_BUNDLE1_SPEC): New.
	(STARTFILE_SPEC): Use darwin bundle spec.
	* config/rs6000/darwin.h (DARWIN_BUNDLE1_SPEC): New.
	(DARWIN_DYLIB1_SPEC): Delete duplicate.

2019-12-13  Martin Sebor  <msebor@redhat.com>

	PR middle-end/91582
	PR middle-end/92868
	* builtins.c (addr_decl_size): New function.
	(gimple_call_alloc_size): Add arguments.
	(compute_objsize): Add an argument.  Set *PDECL even for allocated
	objects.
	Correct checking for negative wide_int.
	Correct handling of negative outer offsets into unknown regions
	or with unknown inner offsets.
	Extend offsets to at most sizetype precision.
	Only handle constant subobject sizes.
	* builtins.h (gimple_call_alloc_size): Add arguments.
	* tree.c (component_ref_size): Always return sizetype.
	* tree-ssa-strlen.c (strinfo::alloc): New member.
	(get_addr_stridx): Add argument.
	(get_stridx): Use ptrdiff_t.  Add argument.
	(new_strinfo): Set new member.
	(get_string_length): Handle alloca and VLA.
	(dump_strlen_info): Dump more state.
	(maybe_invalidate): Print more info.  Decrease indentation.
	(unshare_strinfo): Set new member.
	(valid_builtin_call): Handle alloca and VLA.
	(maybe_warn_overflow): Check and set no-warning bit.  Improve
	handling of offsets.  Print allocated objects.
	(handle_builtin_strlen): Handle strinfo records with null lengths.
	(handle_builtin_strcpy): Add argument.  Call maybe_warn_overflow.
	(is_strlen_related_p): Handle dynamically allocated objects.
	(get_range): Add argument.
	(handle_builtin_malloc): Rename...
	(handle_alloc): ...to this and handle all allocation functions.
	(handle_builtin_memset): Call maybe_warn_overflow.
	(count_nonzero_bytes): Handle more MEM_REF forms.
	(strlen_check_and_optimize_call): Call handle_alloc_call.  Pass
	arguments to more callees.
	(handle_integral_assign): Add argument.  Create strinfo entries
	for MEM_REF assignments.
	(check_and_optimize_stmt): Handle more MEM_REF forms.

2019-12-13  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.h (DARWIN_DYLIB1_SPEC): New.

2019-12-13  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-in.c (input_function): Add node parameter.
	(lto_read_body_or_constructor): Use it.

2019-12-13  Roman Zhuykov  <zhroma@ispras.ru>

	PR rtl-optimization/92591
	* modulo-sched.c (ps_add_node_check_conflicts): Improve checking
	for history > 0 case.

2019-12-13  Roman Zhuykov  <zhroma@ispras.ru>

	* modulo-sched.c (sms_schedule): Use param_sms_max_ii_factor
	value instead of macro.  Adjust comment.
	(sms_schedule_by_order): Use parameter value without macro.
	* params.opt: Add ranges for modulo scheduler parameters,
	set param_sms_max_ii_factor = 2 by default.

2019-12-13  Roman Zhuykov  <zhroma@ispras.ru>

	PR rtl-optimization/90001
	* ddg.c (create_ddg): Init max_dist array for each node.
	(free_ddg): Free max_dist array.
	(create_ddg_edge): Use bool field instead of aux union.
	(set_recurrence_length): Use prepared max_dist information instead
	of calling longest_simple_path.
	(create_scc): Remove graph argument, fill node's aux.count with
	SCC id, and move set_recurrence_length call to...
	(create_ddg_all_sccs): ...here, after filling all max_dist arrays
	using Floyd–Warshall-like algorithm.
	(update_dist_to_successors): Remove the whole function.
	(longest_simple_path): Likewise.
	* ddg.h (struct ddg_node): Add max_dist pointer.
	(struct ddg_edge): Use bool field instead of unused aux union.

2019-12-13  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (mulv64si3<exec>): Rename to ...
	(mul<mode>3<exec>): ... this, and implement sub-dword patterns.
	(mulv64si3_dup<exec>): Rename to ...
	(mul<mode>3_dup<exec>): ... this, and implement sub-dword patterns.

2019-12-13  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-utils.c (ipa_merge_profiles): Improve dumping; merge common
	targets.

2019-12-13  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (sdwa): New mode attribute.
	(VCVT_FROM_MODE): Rename to ...
	(VCVT_MODE): ... this.
	(VCVT_TO_MODE): Delete mode iterator.
	(VCVT_FMODE): New mode iterator.
	(VCVT_IMODE): Likewise.
	(<cvt_name><VCVT_FROM_MODE:mode><VCVT_TO_MODE:mode>2<exec>): Change ...
	(<cvt_name><VCVT_MODE:mode><VCVT_FMODE:mode>2<exec>): ... to this.
	(<cvt_name><VCVT_FMODE:mode><VCVT_IMODE:mode>2<exec>): New.
	(zero_convert): New code iterator.
	(convop): New code attribute.
	(<convop><VEC_ALL1REG_INT_ALT:mode><VEC_ALL1REG_INT_MODE:mode>2<exec>)
	: New.
	(extend<VEC_ALL1REG_INT_ALT:mode><VEC_ALL1REG_INT_MODE:mode>2<exec>)
	: New.
	(vec_truncatev64div64si): Rename to ...
	(truncv64di<mode>2): ... this and implement sub-dword patterns.
	(vec_truncatev64div64si_exec): Rename to ...
	(truncv64di<mode>2_exec): ... this and implement sub-dword patterns.
	(<convop><mode>v64di2): New insn_and_split.
	(<convop><mode>v64di2_exec): Likewise.
	(mask_gather_load<mode>): Update truncate names.
	(mask_scatter_store<mode>): Likewise.
	* config/gcn/gcn.c (gcn_expand_scaled_offsets): Update truncate names.

2019-12-13  Dennis Zhang  <dennis.zhang@arm.com>

	* config/aarch64/aarch64-arches.def (armv8.6-a): New.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Define
	__ARM_FEATURE_MATMUL_INT8, __ARM_FEATURE_BF16_VECTOR_ARITHMETIC and
	__ARM_FEATURE_BF16_SCALAR_ARITHMETIC when enabled.
	* config/aarch64/aarch64-option-extensions.def (i8mm, bf16): New.
	(fp): Disabling fp also disables i8mm and bf16.
	(simd): Disabling simd also disables i8mm.
	* config/aarch64/aarch64.h (AARCH64_FL_V8_6): New macro.
	(AARCH64_FL_I8MM, AARCH64_FL_BF16, AARCH64_FL_FOR_ARCH8_6): Likewise.
	(AARCH64_ISA_V8_6, AARCH64_ISA_I8MM, AARCH64_ISA_BF16): Likewise.
	(TARGET_I8MM, TARGET_BF16_FP, TARGET_BF16_SIMD): Likewise.
	* doc/invoke.texi (armv8.6-a, i8mm, bf16): Document new options
	and add a new table to list permissible values for ARCH.

2019-12-13  Jakub Jelinek  <jakub@redhat.com>

	PR target/92908
	* simplify-rtx.c (simplify_relational_operation): Punt for vector
	cmp_mode and scalar mode, if simplify_relational_operation returned
	const_true_rtx.
	(simplify_const_relational_operation): Change VOID_mode in function
	comment to VOIDmode.

2019-12-13  Kewen Lin  <linkw@gcc.gnu.org>

	* config/rs6000/rs6000.c (adjust_vectorization_cost): New function.
	(rs6000_add_stmt_cost): Call adjust_vectorization_cost and update
	stmt_cost.

2019-12-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/92904
	* config/i386/i386.c (ix86_gimplify_va_arg): If need_intregs and
	not need_temp, decrease alignment of the read because the GPR save
	area only guarantees 8-byte alignment.

2019-12-12  Georg-Johann Lay  <avr@gjlay.de>

	Add support for some more AVR devices from avrxmega3 family.

	* config/avr/avr-mcus.def (attiny1604, attiny1606, attiny1607)
	(attiny402, attiny404, attiny406)
	(attiny804, attiny806, attiny807)
	(attiny202, attiny204): Add AVR_MCU lines to support them.
	* doc/avr-mmcu.texi: Regenerate.

2019-12-12  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-prop.c (read_ipcp_transformation_info): Fix undefined ordering
	of execution of function call parameters.

2019-12-12  Vineet Gupta  <vgupta@synopsys.com>

	* config/arc/arc-modes.def (CC_FPUE): New Mode CC_FPUE which
	helps codegen generate exceptions even for quiet NaN.
	* config/arc/arc.c (arc_init_reg_tables): Handle New CC_FPUE mode.
	(get_arc_condition_code): Likewise.
	(arc_select_cc_mode): LT, LE, GT, GE to use the New CC_FPUE mode.
	* config/arc/arc.h (REVERSE_CONDITION): Handle New CC_FPUE mode.
	* config/arc/predicates.md (proper_comparison_operator): Likewise.
	* config/arc/fpu.md (cmpsf_fpu_trap): New Pattern for CC_FPUE.
	(cmpdf_fpu_trap): Likewise.

2019-12-12  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (iterator SDF): Check TARGET_FP_DP_BASE.
	(cstoredi4): Use TARGET_HARD_FLOAT.

2019-12-11  Jakub Jelinek  <jakub@redhat.com>

	* opts.c (default_options_table): Move -ftree-loop-distribute-patterns
	entry from -O3 or later section to -O2 or later section.
	* doc/invoke.texi (-ftree-loop-distribute-patterns): Mention the
	option is enabled by default at -O2+ rather than just at -O3.

	PR target/92723
	* tree-vect-patterns.c (vect_recog_rotate_pattern): If dt is not
	vect_internal_def, use oprnd1 as is, without trying to cast it.
	Formatting fix.

2019-12-11  Martin Sebor  <msebor@redhat.com>

	* builtins.c (compute_objsize): Add an argument and set it to offset
	into destination.
	* builtins.h (compute_objsize): Add an argument.
	* tree-object-size.c (addr_object_size): Add an argument and set it
	to offset into destination.
	(compute_builtin_object_size): Same.
	* tree-object-size.h (compute_builtin_object_size): Add an argument.
	* tree-ssa-strlen.c (get_addr_stridx): Add an argument and set it
	to offset into destination.
	(maybe_warn_overflow): New function.
	(handle_store): Call maybe_warn_overflow to issue warnings.

2019-12-11  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.h (STARTFILE_SPEC) [!fexceptions]: Use
	crtbegin_no_eh.o if building for the C language.
	[fno-exceptions]: Use crtbegin_no_eh.o if building for any language
	except C.
	(ENDFILE_SPEC) [!fexceptions]: Use crtend_no_eh.o if building for 
	the C language.
	[fno-exceptions]: Use crtend_no_eh.o if building for any language
	except C.
	* config/msp430/t-msp430: Add -fno-exceptions multilib.
	* doc/install.texi: Document --disable-no-exceptions multilib configure
	option.
	* doc/sourcebuild.texi: Document exceptions_enabled effective target.

2019-12-11  David Malcolm  <dmalcolm@redhat.com>

	* pretty-print.c (pretty_printer::pretty_printer): New copy-ctor.
	(pretty_printer::clone): New vfunc implementation.
	* pretty-print.h (format_postprocessor::clone): New pure vfunc
	decl.
	(pretty_printer::pretty_printer): New copy-ctor decl.
	(pretty_printer::clone): New vfunc decl.

2019-12-11  David Malcolm  <dmalcolm@redhat.com>

	* function-tests.c (selftest::make_fndecl): Make non-static.
	* selftest.h (selftest::make_fndecl): New decl.

2019-12-11  Lewis Hyatt  <lhyatt@gmail.com>

	PR 91853
	* pretty-print.c (pp_quoted_string): Avoid hex-escaping valid
	multibyte input.  Fix off-by-one-bug printing the last byte before a
	hex-escaped output.
	(pp_character): Don't apply line wrapping in the middle of multibyte
	characters.
	(test_utf8): New test.
	(pretty_print_c_tests): Call the new test.

2019-12-11  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm-cpus.in (ALL_SIMD_EXTERNAL): New fgroup.
	(ALL_SIMD): Use it.
	(ALL_FPU_EXTERNAL): New fgroup.
	(ALL_FP): Use it.
	(cortex-a55, cortex-a75, cortex-a76, cortex-a76ae): Remove redundant
	+simd from architecture specification.
	(cortex-a77, neoverse-n1, cortex-a75.cortex-a55): Likewise.
	* config/arm/arm.c (isa_all_fpubits, fpu_bitlist): Rename to ...
	(isa_all_fpubits_internal, fpu_bitlist_internal): ... these.
	(isa_all_fpbits): New bitmap.
	(arm_option_override): Initialize it.
	(arm_configure_build_target): If the target isa does not have any
	FP enabled, do not warn about mismatches in FP-related feature bits.

2019-12-11  Stam Markianos-Wright  <stam.markianos-wright@arm.com>

	* real.c (struct arm_bfloat_half_format,
	encode_arm_bfloat_half, decode_arm_bfloat_half): New.
	* real.h (arm_bfloat_half_format): New.

2019-12-11  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/92865
	* config/i386/i386-expand.c (ix86_valid_mask_cmp_mode): Enable
	integer mask cmov when available even with TARGET_XOP.

2019-12-10  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/92891
	* builtins.c (gimple_call_alloc_size): Convert size to sizetype
	before returning it.

2019-12-10  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/92796
	* lra-int.h (lra_risky_transformations_p): Rename to
	check_and_force_assignment_correctness_p.
	* lra-assigns.c: Ditto.
	(lra_assign): Reset check_and_force_assignment_correctness_p.
	* lra-constraints.c (lra_risky_transformations_p): Rename to
	check_and_force_assignment_correctness_p.
	(lra_constraints): Set up check_and_force_assignment_correctness_p
	only for the 1st sub-pass.
	* lra-eliminations.c (process_insn_for_elimination): Set up
	check_and_force_assignment_correctness_p if the insn chnaged its
	code.

2019-12-10  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/92882
	* regstat.c (regstat_bb_compute_calls_crossed): Don't check
	INSN_UID against DF_INSN_SIZE or use DF_INSN_INFO_GET unless
	NONDEBUG_INSN_P.

	PR ipa/92883
	* ipa-cp.c (propagate_vr_across_jump_function): Pass jvr rather
	than *jfunc->m_vr to intersect.  Formatting fix.

	PR middle-end/92825
	* cfgexpand.c (add_stack_protection_conflicts): Change return type
	from void to bool, return true if at least one stack_vars[i].decl
	is addressable.
	(record_or_union_type_has_array_p, stack_protect_decl_p): Remove.
	(expand_used_vars): Don't call stack_protect_decl_p, instead for
	-fstack-protector-strong set gen_stack_protect_signal to true
	if add_stack_protection_conflicts returned true.  Formatting fixes.
	* doc/invoke.texi (-fstack-protector-strong): Clarify that optimized
	out variables or variables not living on the stack don't count.
	(-fstack-protector): Likewise.  Clarify it affects >= 8 byte arrays
	rather than > 8 byte.

	* ipa-param-manipulation.c
	(ipa_param_body_adjustments::register_replacement): Fix comment typo
	- accross -> across.
	* ipa-sra.c (propagate_used_across_scc_edge, ipa_sra_analysis):
	Likewise.
	(param_splitting_across_edge): Fix typo in dump message - accross
	-> across.

2019-12-10  Jan Hubicka  <hubicka@ucw.cz>

	* cgraph.c (cgraph_node::verify_node): Verify tp_first_run.
	* cgraph.h (cgrpah_node): Turn tp_first_run back to int.
	* cgraphunit.c (tp_first_run_node_cmp): Do not watch for overflows.
	(expand_all_functions): First expand ordered section and then
	unordered.
	* profile.c (compute_value_histograms): Error on out of range
	tp_first_runs.

2019-12-10  Jan Hubicka  <hubicka@ucw.cz>

	* predict.c (compute_function_frequency): Check for presence of IPA
	profile.

2019-12-10  Jan Hubicka  <hubicka@ucw.cz>

	* varasm.c (default_function_section): Fix confused tests for
	tp_first_run reordering.

2019-12-10  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_hard_regno_mode_ok): Don't
	allow SVE modes in GPRs.

2019-12-10  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (vccore): New iterator.
	* config/aarch64/aarch64-sve.md (vec_series<mode>): Use it instead
	of vwcore.
	(*vec_series<mode>_plus): Likewise.

2019-12-10  Frederik Harwath  <frederik@codesourcery.com>

	* omp-low.c (scan_omp_for): Use clause location in warning.

2019-12-10  Richard Sandiford  <richard.sandiford@arm.com>

	* dwarf2out.c (loc_descriptor): Punt for MODE_VECTOR_BOOL.
	(add_const_value_attribute): Likewise.

2019-12-10  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_create_epilog_for_reduction): When
	handling direct_slp_reduc, allow the PHI arguments to have
	a different type from the vector elements.

2019-12-10  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vectorizable_condition): Record the loop
	masks required for extract-last reductions.

2019-12-10  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vect_finish_replace_stmt): Always use the
	original scalar statement rather than a pattern statement.
	(vectorizable_condition): Likewise, in the handling of extract-last
	reductions.

2019-12-10  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vectorizable_reduction): Don't use
	EXTRACT_LAST_REDUCTION for chained reductions.

2019-12-10  Richard Sandiford  <richard.sandiford@arm.com>

	* ipa-utils.h (get_odr_name_for_type): Check for a TYPE_DECL.
	* ipa-devirt.c (warn_types_mismatch): Don't call xstrdup for the
	second demangled name.

2019-12-10  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/i386.c (IX86_LEA_PRIORITY): Fix comment typos.

2019-12-10  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/92862
	* predict.c (predict_paths_leading_to_edge): Fix typo from e to e2.
	* tree-ssa-loop-niter.c (loop_only_exit_p): Return false
	instead of true;

2019-12-09  David Malcolm  <dmalcolm@redhat.com>

	* gcc-rich-location.c
	(maybe_range_label_for_tree_type_mismatch::get_text): Replace
	label_text ctor call with label_text::borrow.
	* gcc-rich-location.h (text_range_label::get_text): Replace
	label_text ctor called with false with label_text::borrow.

2019-12-09  David Malcolm  <dmalcolm@redhat.com>

	* diagnostic-show-locus.c (diagnostic_show_locus): Remove initial
	newline.
	(selftest::test_diagnostic_show_locus_unknown_location): Remove
	initial newline from expected outputs.
	(selftest::test_one_liner_simple_caret): Likewise.
	(selftest::test_one_liner_caret_and_range): Likewise.
	(selftest::test_one_liner_multiple_carets_and_ranges): Likewise.
	(selftest::test_one_liner_fixit_insert_before): Likewise.
	(selftest::test_one_liner_fixit_insert_after): Likewise.
	(selftest::test_one_liner_fixit_remove): Likewise.
	(selftest::test_one_liner_fixit_replace): Likewise.
	(selftest::test_one_liner_fixit_replace_non_equal_range):
	Likewise.
	(selftest::test_one_liner_fixit_replace_equal_secondary_range):
	Likewise.
	(selftest::test_one_liner_fixit_validation_adhoc_locations):
	Likewise.
	(selftest::test_one_liner_many_fixits_1): Likewise.
	(selftest::test_one_liner_many_fixits_2): Likewise.
	(selftest::test_one_liner_labels): Likewise.
	(selftest::test_one_liner_simple_caret_utf8): Likewise.
	(selftest::test_one_liner_caret_and_range_utf8): Likewise.
	(selftest::test_one_liner_multiple_carets_and_ranges_utf8):
	Likewise.
	(selftest::test_one_liner_fixit_insert_before_utf8): Likewise.
	(selftest::test_one_liner_fixit_insert_after_utf8): Likewise.
	(selftest::test_one_liner_fixit_remove_utf8): Likewise.
	(selftest::test_one_liner_fixit_replace_utf8): Likewise.
	(selftest::test_one_liner_fixit_replace_non_equal_range_utf8):
	Likewise.
	(selftest::test_one_liner_fixit_replace_equal_secondary_range_utf8):
	Likewise.
	(selftest::test_one_liner_fixit_validation_adhoc_locations_utf8):
	Likewise.
	(selftest::test_one_liner_many_fixits_1_utf8): Likewise.
	(selftest::test_one_liner_many_fixits_2_utf8): Likewise.
	(selftest::test_one_liner_labels_utf8): Likewise.
	(selftest::test_add_location_if_nearby): Likewise.
	(selftest::test_diagnostic_show_locus_fixit_lines): Likewise.
	(selftest::test_overlapped_fixit_printing): Likewise.
	(selftest::test_overlapped_fixit_printing_utf8): Likewise.
	(selftest::test_overlapped_fixit_printing_2): Likewise.
	(selftest::test_fixit_insert_containing_newline): Likewise.
	(selftest::test_fixit_insert_containing_newline_2): Likewise.
	(selftest::test_fixit_replace_containing_newline): Likewise.
	(selftest::test_fixit_deletion_affecting_newline): Likewise.
	(selftest::test_line_numbers_multiline_range): Likewise.
	* diagnostic.c (default_diagnostic_finalizer): Add pp_newline call
	before call to diagnostic_show_locus.
	(diagnostic_append_note): Likewise.

2019-12-09  Martin Sebor  <msebor@redhat.com>

	PR middle-end/92761
	PR middle-end/92762
	* hash-map-tests.c (test_map_of_type_with_ctor_and_dtor): Tighten
	up tests.
	* hash-table.h (hash_table::expand): Use placement new to copy
	construct objects in uninitialized storage.
	(hash_table::empty_slow): Avoid invoking copy assignment on
	uninitialized objects.

2019-12-09  Lewis Hyatt  <lhyatt@gmail.com>

	PR preprocessor/49973
	* input.c (location_compute_display_column): New function to help with
	multibyte awareness in diagnostics.
	(test_cpp_utf8): New self-test.
	(input_c_tests): Call the new test.
	* input.h (location_compute_display_column): Declare.
	* diagnostic-show-locus.c: Pervasive changes to add multibyte awareness
	to all classes and functions.
	(enum column_unit): New enum.
	(class exploc_with_display_col): New class.
	(class layout_point): Convert m_column member to array m_columns[2].
	(layout_range::contains_point): Add col_unit argument.
	(test_layout_range_for_single_point): Pass new argument.
	(test_layout_range_for_single_line): Likewise.
	(test_layout_range_for_multiple_lines): Likewise.
	(line_bounds::convert_to_display_cols): New function.
	(layout::get_state_at_point): Add col_unit argument.
	(make_range): Use empty filename rather than dummy filename.
	(get_line_width_without_trailing_whitespace): Rename to...
	(get_line_bytes_without_trailing_whitespace): ...this.
	(test_get_line_width_without_trailing_whitespace): Rename to...
	(test_get_line_bytes_without_trailing_whitespace): ...this.
	(class layout): m_exploc changed to exploc_with_display_col from
	plain expanded_location.
	(layout::get_linenum_width): New accessor member function.
	(layout::get_x_offset_display): Likewise.
	(layout::calculate_linenum_width): New subroutine for the constuctor.
	(layout::calculate_x_offset_display): Likewise.
	(layout::layout): Use the new subroutines. Add multibyte awareness.
	(layout::print_source_line): Add multibyte awareness.
	(layout::print_line): Likewise.
	(layout::print_annotation_line): Likewise.
	(line_label::line_label): Likewise.
	(layout::print_any_labels): Likewise.
	(layout::annotation_line_showed_range_p): Likewise.
	(get_printed_columns): Likewise.
	(class line_label): Rename m_length to m_display_width.
	(get_affected_columns): Rename to...
	(get_affected_range): ...this; add col_unit argument and multibyte
	awareness.
	(class correction): Add m_affected_bytes and m_display_cols
	members.  Rename m_len to m_byte_length for clarity.  Add multibyte
	awareness throughout.
	(correction::insertion_p): Add multibyte awareness.
	(correction::compute_display_cols): New function.
	(correction::ensure_terminated): Use new member name m_byte_length.
	(line_corrections::add_hint): Add multibyte awareness.
	(layout::print_trailing_fixits): Likewise.
	(layout::get_x_bound_for_row): Likewise.
	(test_one_liner_simple_caret_utf8): New self-test analogous to the one
	with _utf8 suffix removed, testing multibyte awareness.
	(test_one_liner_caret_and_range_utf8): Likewise.
	(test_one_liner_multiple_carets_and_ranges_utf8): Likewise.
	(test_one_liner_fixit_insert_before_utf8): Likewise.
	(test_one_liner_fixit_insert_after_utf8): Likewise.
	(test_one_liner_fixit_remove_utf8): Likewise.
	(test_one_liner_fixit_replace_utf8): Likewise.
	(test_one_liner_fixit_replace_non_equal_range_utf8): Likewise.
	(test_one_liner_fixit_replace_equal_secondary_range_utf8): Likewise.
	(test_one_liner_fixit_validation_adhoc_locations_utf8): Likewise.
	(test_one_liner_many_fixits_1_utf8): Likewise.
	(test_one_liner_many_fixits_2_utf8): Likewise.
	(test_one_liner_labels_utf8): Likewise.
	(test_diagnostic_show_locus_one_liner_utf8): Likewise.
	(test_overlapped_fixit_printing_utf8): Likewise.
	(test_overlapped_fixit_printing): Adapt for changes to
	get_affected_columns, get_printed_columns and class corrections.
	(test_overlapped_fixit_printing_2): Likewise.
	(test_linenum_sep): New constant.
	(test_left_margin): Likewise.
	(test_offset_impl): Helper function for new test.
	(test_layout_x_offset_display_utf8): New test.
	(diagnostic_show_locus_c_tests): Call new tests.

2019-12-09  Eric Botcazou  <ebotcazou@adacore.com>

	* tree.c (build_array_type_1): Add SET_CANONICAL parameter and compute
	TYPE_CANONICAL from the element type only if it is true.  Remove a few
	obsolete lines and adjust recursive call.
	(fld_process_array_type): Adjust call to build_array_type_1.
	(build_array_type): Likewise.
	(build_nonshared_array_type): Likewise.

2019-12-09  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (gather<mode>_insn_1offset<exec>): Change
	%s to %o in asm output.
	(gather<mode>_insn_2offsets<exec>): Likewise.

2019-12-09  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/t-multilib: Use arm->thumb multilib reuse rules
	on a-profile.

2019-12-09  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (unnamed mfcr define_insn): Name this
	set<mode>_cc.
	(unnamed define_insn_and_split): Delete.
	(unnamed define_insn): Delete.
	(unnamed define_insn): Delete.
	(unnamed define_split): Delete.

2019-12-09  Matthew Malcomson  <matthew.malcomson@arm.com>

	* regstat.c (regstat_bb_compute_calls_crossed): Add a cast to
	avoid a warning.

2019-12-09  Matthew Malcomson  <matthew.malcomson@arm.com>

	PR middle-end/92410
	* bb-reorder.c (pass_reorder_blocks::execute): Recompute
	dataflow luids once basic blocks have been reordered.
	* haifa-sched.c (reemit_notes): Create df insn record for each
	new note.
	* regstat.c (regstat_bb_compute_calls_crossed): Assert every
	insn has an insn record before trying to use it.

2019-12-09  Hongtao Liu  <hongtao.liu@intel.com>

	* common/config/i386/i386-common.c
	(OPTION_MASK_ISA_AVX5124FMAPS_SET): Rename to
	OPTION_MASK_ISA2_AVX5124FMAPS_SET.
	(OPTION_MASK_ISA_AVX5124VNNIW_SET, OPTION_MASK_ISA_AVX512BF16_SET,
	OPTION_MASK_ISA_AVX512VP2INTERSECT_SET,
	OPTION_MASK_ISA_PCONFIG_SET, OPTION_MASK_ISA_WBNOINVD_SET,
	OPTION_MASK_ISA_SGX_SET, OPTION_MASK_ISA_CX16_SET,
	OPTION_MASK_ISA_MOVBE_SET, OPTION_MASK_ISA_PTWRITE_SET,
	OPTION_MASK_ISA_MWAITX_SET, OPTION_MASK_ISA_CLZERO_SET,
	OPTION_MASK_ISA_RDPID_SET, OPTION_MASK_ISA_VAES_SET,
	OPTION_MASK_ISA_MOVDIR64B_SET, OPTION_MASK_ISA_WAITPKG_SET,
	OPTION_MASK_ISA_CLDEMOTE_SET, OPTION_MASK_ISA_ENQCMD_SET,
	OPTION_MASK_ISA_AVX5124FMAPS_UNSET,
	OPTION_MASK_ISA_AVX5124VNNIW_UNSET,
	OPTION_MASK_ISA_AVX512BF16_UNSET,
	OPTION_MASK_ISA_AVX512VP2INTERSECT_UNSET,
	OPTION_MASK_ISA_PCONFIG_UNSET, OPTION_MASK_ISA_WBNOINVD_UNSET,
	OPTION_MASK_ISA_SGX_UNSET, OPTION_MASK_ISA_CX16_UNSET,
	OPTION_MASK_ISA_MOVBE_UNSET, OPTION_MASK_ISA_PTWRITE_UNSET,
	OPTION_MASK_ISA_MWAITX_UNSET, OPTION_MASK_ISA_CLZERO_UNSET,
	OPTION_MASK_ISA_RDPID_UNSET, OPTION_MASK_ISA_VAES_UNSET,
	OPTION_MASK_ISA_MOVDIR64B_UNSET, OPTION_MASK_ISA_WAITPKG_UNSET,
	OPTION_MASK_ISA_CLDEMOTE_UNSET, OPTION_MASK_ISA_ENQCMD_UNSET,
	OPTION_MASK_ISA_AVX5124FMAPS, OPTION_MASK_ISA_AVX5124VNNIW,
	OPTION_MASK_ISA_AVX512BF16, OPTION_MASK_ISA_AVX512VP2INTERSECT,
	OPTION_MASK_ISA_PCONFIG, OPTION_MASK_ISA_WBNOINVD,
	OPTION_MASK_ISA_SGX, OPTION_MASK_ISA_CX16, OPTION_MASK_ISA_MOVBE,
	OPTION_MASK_ISA_PTWRITE, OPTION_MASK_ISA_MWAITX,
	OPTION_MASK_ISA_CLZERO, OPTION_MASK_ISA_RDPID,
	OPTION_MASK_ISA_VAES, OPTION_MASK_ISA_MOVDIR64B,
	OPTION_MASK_ISA_WAITPKG, OPTION_MASK_ISA_CLDEMOTE,
	OPTION_MASK_ISA_ENQCMD): Ditto.
	* config/i386/i386-builtin.def
	(OPTION_MASK_ISA_AVX5124FMAPS, OPTION_MASK_ISA_AVX5124VNNIW,
	OPTION_MASK_ISA_AVX512BF16, OPTION_MASK_ISA_AVX512VP2INTERSECT,
	OPTION_MASK_ISA_WBNOINVD, OPTION_MASK_ISA_PTWRITE,
	OPTION_MASK_ISA_RDPID, OPTION_MASK_ISA_VAES,
	OPTION_MASK_ISA_MOVDIR64B, OPTION_MASK_ISA_ENQCMD): Ditto.
	* config/i386/i386-builtins.c (OPTION_MASK_ISA_MWAITX,
	OPTION_MASK_ISA_CLZERO, OPTION_MASK_ISA_WAITPKG,
	OPTION_MASK_ISA_CLDEMOTE, OPTION_MASK_ISA_WBNOINVD): Ditto.
	* config/i386/i386-c.c
	(OPTION_MASK_ISA_AVX5124FMAPS, OPTION_MASK_ISA_AVX5124VNNIW,
	OPTION_MASK_ISA_AVX512BF16, OPTION_MASK_ISA_AVX512VP2INTERSECT,
	OPTION_MASK_ISA_PCONFIG, OPTION_MASK_ISA_WBNOINVD,
	OPTION_MASK_ISA_SGX, OPTION_MASK_ISA_CX16, OPTION_MASK_ISA_MOVBE,
	OPTION_MASK_ISA_PTWRITE, OPTION_MASK_ISA_MWAITX,
	OPTION_MASK_ISA_CLZERO, OPTION_MASK_ISA_RDPID,
	OPTION_MASK_ISA_VAES, OPTION_MASK_ISA_MOVDIR64B,
	OPTION_MASK_ISA_WAITPKG, OPTION_MASK_ISA_CLDEMOTE,
	OPTION_MASK_ISA_ENQCMD): Ditto.
	* config/i386/i386-option.c: Ditto
	* config/i386/i386.opt: Ditto..
	* config/i386/i386.h: (TARGET_ISA_AVX5124FMAPS,
	TARGET_ISA_AVX5124VNNIW,  TARGET_ISA_AVX512BF16,
	TARGET_ISA_AVX512VP2INTERSECT, TARGET_ISA_PCONFIG,
	TARGET_ISA_WBNOINVD, TARGET_ISA_SGX, TARGET_ISA_CX16,
	TARGET_ISA_MOVBE, TARGET_ISA_PTWRITE, TARGET_ISA_MWAITX,
	TARGET_ISA_CLZERO, TARGET_ISA_RDPID, TARGET_ISA_VAES,
	TARGET_ISA_MOVDIR64B, TARGET_ISA_WAITPKG, TARGET_ISA_CLDEMOTE)
	TARGET_ISA_ENQCMD): Ditto.

2019-12-09  Sudakshina Das  <sudi.das@arm.com>
	    Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmt.c (vectorizable_shift): Condition ndts for
	vect_model_simple_cost call on scalar_shift_arg.

2019-12-09  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/92834
	* match.pd (A - ((A - B) & -(C cmp D)) -> (C cmp D) ? B : A,
	A + ((B - A) & -(C cmp D)) -> (C cmp D) ? B : A): New simplifications.

2019-12-09  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/89007
	* tree-vect-patterns.c (vect_recog_average_pattern): If there is no
	target support available, generate code to distribute rshift over plus
	and add a carry.

2019-12-09  Martin Liska  <mliska@suse.cz>

	PR ipa/92737
	* cgraph.c (symbol_table_test::symbol_table_test): Fix
	coding style.
	* cgraph.h (symtab_node::symtab_node): New constructor.
	(cgraph_node::cgraph_node): Likewise.
	(varpool_node::varpool_node): Likewise.
	(symbol_table::allocate_cgraph_symbol): Use newly
	created constructor.
	(symbol_table::allocate_cgraph_symbol): Remove.
	* cgraphunit.c (symtab_terminator): Likewise.
	* varpool.c (varpool_node::create_empty): Use newly
	created constructor.

2019-12-09  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/92686
	* config/i386/sse.md
	(*<avx512>_cmp<mode>3<mask_scalar_merge_name><round_saeonly_name>,
	*<avx512>_cmp<mode>3<mask_scalar_merge_name>,
	*<avx512>_ucmp<mode>3<mask_scalar_merge_name>,
	*<avx512>_ucmp<mode>3<mask_scalar_merge_name>): New.
	* config/i386/i386.c (ix86_print_operand): New operand substitution.
	* config/i386/i386-expand.c (ix86_valid_mask_cmp_mode):
	New function.
	(ix86_expand_sse_cmp): Relax condition for integer mask from
	512-bit vector to all 128/256/512-bit vector. Delete code gen
	for avx512f compare patterns since we have generic pattern now.
	(ix86_expand_sse_movcc): Adjust condition and codegen for
	maskcmp.
	(ix86_expand_int_sse_cmp): Don't canonicalize the comparison
	when corresponding vector compare is available.

2019-12-08  Sandra Loosemore  <sandra@codesourcery.com>

	Revert:
	2019-12-05  Sandra Loosemore  <sandra@codesourcery.com>

	* config/nios2/linux.h (LINK_EH_SPEC): Define.

2019-12-07  Jan Hubicka  <hubicka@ucw.cz>

	* cgraph.c (cgraph_node::dump): Make tp_first_run 64bit.
	* cgraph.h (cgrpah_node): Likewise.
	(tp_first_run_node_cmp): Deeclare.
	* cgraphunit.c (node_cmp): Rename to ...
	(tp_first_run_node_cmp): ... this; export; watch for 64bit overflows;
	clear tp_first_run for no_reorder and !flag_profile_reorder_functions.
	(expand_all_functions): Collect tp_first_run and normal functions to
	two vectors so the other functions remain sorted. Do not check for
	flag_profile_reorder_functions it is function local flag.
	* profile.c (compute_value_histograms): Update tp_first_run printing.

2019-12-07  Jan Hubicka  <hubicka@ucw.cz>

	* opts.c (common_handle_option): Do not clear ipa_reference for
	-fprofile-use.

2019-12-07  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-split.c (split_function): Preserve 0 tp_first_run.

2019-12-07  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline-analysis.c (do_estimate_edge_time): Silence overactive
	sanity check.

2019-12-07  Jan Hubicka  <hubicka@ucw.cz>

	PR tree-optimization/92860
	* common.opt (fprofile-reorder-functions, ftoplevel-reorder): Add
	Optimization flag.

2019-12-07  Marek Polacek  <polacek@redhat.com>

	PR c++/91678 - wrong error with decltype and location wrapper.
	* fold-const.c (maybe_lvalue_p): Handle VIEW_CONVERT_EXPR.

2019-12-07  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/90840
	* expr.c (expand_assignment): In the case of a CONCAT on the LHS, make
	sure to pass a valid inner mode in calls to simplify_gen_subreg.

2019-12-07  Tobias Burnus  <tobias@codesourcery.com>
	    David Malcolm  <dmalcolm@redhat.com>
	    Jakub Jelinek  <jakub@redhat.com>

	PR c/87488
	* pretty-print.c (pp_begin_url, pp_end_url, test_urls): Use BEL
	instead of ST sequence to terminate OSC 8 strings.

2019-12-06  Andreas Krebbel  <krebbel@linux.ibm.com>
	    Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/92176
	* lra.c (simplify_subreg_regno): Don't permit unconditional
	changing mode for LRA too.

2019-12-06  Richard Sandiford  <richard.sandiford@arm.com>

	* target.h (TCTX_ALLOCATION, TCTX_DEALLOCATION, TCTX_EXCEPTIONS)
	(TCTX_CAPTURE_BY_COPY): New type_context_kinds.
	* config/aarch64/aarch64-sve-builtins.cc (verify_type_context):
	Handle them.

2019-12-06  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (gather<mode>_insn_1offset<exec>): Use %o
	in the asm output.

2019-12-06  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md (VEC_1REG_MODE): Remove V64QI and V64HI.
	(VEC_1REG_ALT): Likewise.
	(VEC_ALL1REG_MODE): New mode iterator.
	(VEC_1REG_INT_MODE): Remove V64QI and V64HI.
	(VEC_1REG_INT_ALT): Likewise.
	(VEC_ALL1REG_INT_MODE): New mode interator.
	(VEC_ALL1REG_INT_ALT): Likewise.
	(VEC_REG_MODE): Remove V64QI and V64HI.
	(VEC_ALLREG_MODE): New mode interator.
	(vec_merge): Change to VEC_ALLREG_MODE.
	(vec_merge_with_clobber): Likewise.
	(vec_merge_with_vcc): Likewise.
	(mov<mode>): Likewise.
	(mov<mode>_unspec): Likewise.
	(*mov<mode>): Change to VEC_ALL1REG_MODE.
	(mov<mode>_exec): Likewise.
	(*mov<mode>_exec_match): Likewise.
	(mov<mode>_sgprbase): Likewise.
	(reload_in<mode>): Change to VEC_ALLREG_MODE.
	(reload_out<mode>): Likewise.
	(scalar address splits): Likewise.
	(*vec_set<mode>): Change to VEC_ALL1REG_MODE.
	(vec_set<mode>): Change to VEC_ALLREG_MODE.
	(*vec_set<mode>_1): Change to VEC_ALL1REG_MODE.
	(vec_duplicate<mode><exec>): Likewise.
	(vec_extract<mode><scalar_mode>): Likewise.
	(vec_init<mode><scalar_mode>): Change to VEC_ALLREG_MODE.
	(gather_load<mode>): Likewise.
	(gather<mode>_exec): Likewise.
	(gather<mode>_expr<exec>): Likewise.
	(gather<mode>_insn_1offset<exec>): Likewise.
	(gather<mode>_insn_1offset_ds<exec>): Likewise.
	(gather<mode>_insn_2offsets<exec>): Likewise.
	(ds_bpermute<mode>): Change to VEC_ALL1REG_MODE.
	(VEC_INT_MODE): Remove V64QI and V64HI.
	(vcond_mask_<mode>di): Change to VEC_ALLREG_MODE.
	(vcond<VEC_1REG_MODE:mode><VEC_1REG_ALT:mode>): Change to
	VEC_ALL1REG_MODE.
	(vcond<VEC_1REG_MODE:mode><VEC_1REG_ALT:mode>_exec): Likewise.
	(vcondu<VEC_1REG_MODE:mode><VEC_1REG_INT_ALT:mode>): Likewise.
	(vcondu<VEC_1REG_MODE:mode><VEC_1REG_INT_ALT:mode>_exec): Likewise.
	(maskload<mode>di): Change to VEC_ALL1REG_MODE.
	(maskstore<mode>di): Likewise.
	(mask_gather_load<mode>): Likewise.
	(mov_from_lane63_<mode>): Likewise.
	* config/gcn/gcn.c (gcn_vector_mode_supported_p): Renable V64QImode
	and V64HImode vectorization.
	(gcn_related_vector_mode): New function.
	(TARGET_VECTORIZE_RELATED_MODE): New define.

2019-12-06  Tobias Burnus  <tobias@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>

	* omp-low.c (lower_omp_target): For optional arguments, deref once
	more to obtain the type.

2019-12-06  Richard Biener  <rguenther@suse.de>

	* match.pd (nop_convert): Remove empty match.  Use nop_convert?
	everywhere.

2019-12-06  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-data-ref.c (prune_runtime_alias_test_list): Exit early
	for empty vectors.  Avoid using ordered_remove and instead
	shuffle the vector as we go.

2019-12-06  Richard Biener  <rguenther@suse.de>

	* genmatch.c (enum tree_code): Remove CONVERT{0,1,2} and
	VIEW_CONVERT{0,1,2}.
	(expr::opt_grp): Add and initialize.
	(lower_opt_convert): Rename to ...
	(lower_opt): ... and work on opt_grp, simply switching operations
	from being optional to being present or not.
	(has_opt_convert): Rename to ...
	(has_opt): ... and adjust.
	(parser::parse_operation): Return the optional opt_grp,
	remove special-casing of conditional operations and more generally
	parse [digit]'?'.
	(parser::parse_expr): Stick on the parsed opt_grp and perform
	rough verification.
	(parser::parse_for): Remove now unnecessary code.
	(main): Likewise.
	* doc/match-and-simplify.texi: Mention ? now works on all
	unary operations and also match predicates.

2019-12-06  Jan Hubicka  <hubicka@ucw.cz>

	* cgraphclones.c (cgraph_node::create_clone): Only localize toplevel
	functions, not inline clones.

2019-12-06  Jan Hubicka  <hubicka@ucw.cz>

	* cfgexpand.c (expand_debug_expr): Do not ICE on SAD_EXPR.

2019-12-06  Richard Biener  <rguenther@suse.de>

	* genmatch.c (c_expr::gen_transform): Emit newlines from line
	number changes rather than after every semicolon.

2019-12-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92819
	* match.pd (VEC_PERM_EXPR -> BIT_INSERT_EXPR): Handle inserts
	into the last lane.  For two-element vectors try inserting
	into the last lane when inserting into the first fails.

2019-12-06  Jakub Jelinek  <jakub@redhat.com>

	* common.opt (fprofile-partial-training): Terminate description with
	full stop.

2019-12-05  Martin Sebor  <msebor@redhat.com>

	PR middle-end/92622
	* tree-vrp.c (vrp_prop::check_array_ref): Avoid using a variable
	left uninitialized by get_addr_base_and_unit_offset on failure.

2019-12-05  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-prop.c (ipa_set_jf_unknown): Do not clear bits and m_vr.
	(detect_type_change_from_memory_writes): Remoe parameter JFUNC.
	(detect_type_change): Likewise.
	(detect_type_change_ssa): Likewise.
	(ipa_analyze_virtual_call_uses): Update.

2019-12-05  Sandra Loosemore  <sandra@codesourcery.com>

	* config/nios2/linux.h (LINK_EH_SPEC): Define.

2019-12-05  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline-transform.c (inline_call): Fix maintenatnce of comdat_local

2019-12-05  Jan Hubicka  <hubicka@ucw.cz>

	* cgraphclones.c (localize_profile): New function.
	(cgraph_node::create_clone): Use it for partial profiles.
	* common.opt (fprofile-partial-training): New flag.
	* doc/invoke.texi (-fprofile-partial-training): Document.
	* ipa-cp.c (update_profiling_info): For partial profiles do not
	set function profile to zero.
	* profile.c (compute_branch_probabilities): With partial profile
	watch if edge count is zero and turn all probabilities to guessed.
	(compute_branch_probabilities): For partial profiles do not apply
	profile when entry count is zero.
	* tree-profile.c (tree_profiling): Only do value_profile_transformations
	when profile is read.

2019-12-05  Sudakshina Das  <sudi.das@arm.com>

	* tree-vect-loop.c (vect_model_reduction_cost): Remove reduction_type
	check from if condition.

2019-12-05  Tobias Burnus  <tobias@codesourcery.com>

	* omp-low.c (lower_omp_target): For use_device_ptr/use_derice_addr
	and Fortran's optional arguments, unconditionally add the is-present
	condition before the libgomp call.

2019-12-05  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/92768
	* tree-core.h (OEP_BITWISE): New flag.
	* fold-const.c (operand_compare::operand_equal_p): Handle it.
	* tree-vector-builder.h (tree_vector_builder::equal_p): Pass it.

2019-12-05  Richard Biener  <rguenther@suse.de>

	PR middle-end/92818
	* tree-ssa-forwprop.c (simplify_vector_constructor): Improve
	heuristics on what don't care element to choose.
	* match.pd (VEC_PERM_EXPR -> BIT_INSERT_EXPR): Fix typo.

2019-12-05  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/92817
	* coverage.c (build_gcov_exit_decl): Remove superfluous
	void_type_node.

2019-12-05  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.md (cbranch<mode>4): Use
	msp430_general_dst_nonv_operand instead of nonimmediate_operand for
	dest operand of CMP instruction.
	(cbranchpsi4_real): Likewise.
	(cbranchqi4_real): Likewise.
	(cbranchhi4_real): Likewise.
	(cbranchpsi4_reversed): Likewise.
	(cbranchqi4_reversed): Likewise.
	(cbranchhi4_reversed): Likewise.

2019-12-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92803
	* tree-ssa-forwprop.c (simplify_vector_constructor): Fix
	invariant vector construction.

2019-12-05  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/91971
	* coverage.c (coverage_init): Mangle full path
	only when -fprofile-dir is used.

2019-12-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/92791
	* config/i386/i386.md (movstrict<mode>): Move test for
	TARGET_PARTIAL_REG_STALL and not optimizing for size from
	expander's condition to the body - FAIL; in that case.

2019-12-03  Martin Sebor  <msebor@redhat.com>

	PR middle-end/91582
	* builtins.c (gimple_call_alloc_size): New function.
	(compute_objsize): Add argument.  Call gimple_call_alloc_size.
	Handle variable offsets and indices.
	* builtins.h (gimple_call_alloc_size): Declare.
	(compute_objsize): Add argument.
	* gimple-ssa-warn-restrict.c: Remove assertions.
	* tree-ssa-strlen.c (handle_store): Handle calls to allocated objects.

2019-12-04  Julian Brown  <julian@codesourcery.com>

	* config/gcn/gcn.h (FIXED_REGISTERS): Make s6/s7 fixed registers.

2019-12-04  Peter Bergner <bergner@linux.ibm.com>

	PR bootstrap/92661
	* config/rs6000/rs6000-c.c (struct altivec_builtin_types): Move to
	rs6000.h.
	(altivec_overloaded_builtins): Move to rs6000-call.c.
	* config/rs6000/rs6000.h (struct altivec_builtin_types): Moved from
	rs6000-c.c.
	* config/rs6000/rs6000-call.c (rs6000_builtin_info): Make static.
	(altivec_overloaded_builtins): Moved from rs6000-c.c.
	(rs6000_common_init_builtins): Do no define builtins that overload
	builtins that have been disabled.

2019-12-04  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/arm.c (arm_option_override_internal):
	Use max_cond_insns from CPU tuning unless -mrestrict-it is used.

2019-12-04  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c
	(thunderxt88_tunings): Use AARCH64_FUSE_ALU_BRANCH.
	(thunderx_tunings): Likewise.
	(tsv110_tunings): Use AARCH64_FUSE_ALU_BRANCH and AARCH64_FUSE_ALU_CBZ.
	(thunderx2t99_tunings): Likewise.
	(aarch_macro_fusion_pair_p): Add support for AARCH64_FUSE_CMP_BRANCH.
	* config/aarch64/aarch64-fusion-pairs.def: Add ALU_CBZ fusion.

2019-12-04  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_reference_lookup_3): Properly guard
	empty CTOR and memset partial-def registering.  Take advantage
	of fancy offset analysis in memset handling.

2019-12-04  Richard Sandiford  <richard.sandiford@arm.com>

	* fold-const.c (native_encode_vector_part): Handle
	VECTOR_BOOLEAN_TYPE_Ps that have subbyte precision.
	(native_decode_vector_tree): Delete, moving the bulk of the code to...
	(native_interpret_vector_part): ...this new function.  Use a pointer
	and length instead of a vec<> and start index.
	(native_interpret_vector): Use native_interpret_vector_part.
	(fold_view_convert_vector_encoding): Likewise.

2019-12-04  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Handle
	non-constant defs in the most trivial way.
	(vn_reference_lookup_3): Also push down SSA partial defs.

2019-12-04  Martin Liska  <mliska@suse.cz>

	* tree-switch-conversion.c (switch_decision_tree::try_switch_expansion):
	Initialize count of newly created BB.

2019-12-04  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/92734
	* match.pd ((A +- B) - A -> +- B, (A +- B) -+ B -> A,
	A - (A +- B) -> -+ B, A +- (B -+ A) -> +- B): Handle nop_convert.

2019-12-04  Kewen Lin  <linkw@gcc.gnu.org>

	PR target/92760
	* config/rs6000/rs6000.c (rs6000_preferred_simd_mode): Use
	VECTOR_MEM_NONE_P instead of VECTOR_UNIT_NONE_P.

2019-12-03  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c: Include tree-into-ssa.h.
	(compute_fn_summary): Call update_ssa.

2019-12-03  Jan Hubicka  <hubicka@ucw.cz>

	* cgraph.c (cgraph_node::verify_node): Check that calls_comdat_local
	is set only for symbol in comdat group.
	* symtab.c (symtab_node::dissolve_same_comdat_group_1): Clear it.

2019-12-03  Jan Hubicka  <hubicka@ucw.cz>

	* cgraph.c: Include tree-into-ssa.h
	(cgraph_node::get_body): Call update_ssa.
	* cgraphunit.c (cgraph_node::expand): Likewise.
	* lto-streamer-in.c (input_function): Do not call update_ssa.

2019-12-03  Richard Sandiford  <richard.sandiford@arm.com>

	* gimplify.c (gimplify_compound_lval): Don't gimplify and install
	an array element size if array_element_size is already an invariant.
	Similarly don't gimplify and install a field offset if
	component_ref_field_offset is already an invariant.

2019-12-03  Richard Sandiford  <richard.sandiford@arm.com>

	* cfgexpand.c (discover_nonconstant_array_refs_r): If an access
	with POLY_INT_CST size is made to a fixed-size object, force the
	object to live in memory.

2019-12-03  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md: Change "vcondu" patterns to use VEC_1REG_MODE
	for the data mode.

2019-12-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92758
	* tree-ssa-forwprop.c (simplify_vector_constructor): Restore
	operation on uniform vectors.

2019-12-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92645
	* gimple-fold.c (gimple_fold_builtin_memory_op): Fold memcpy
	from or to a properly aligned register variable.

2019-12-03  Matthias Klose  <doko@ubuntu.com>

	* Makefile.in (SOURCES): Add doc/lto-dump.1.
	(install-man): Add $(LTO_DUMP_INSTALL_NAME)$(man1ext).
	($(LTO_DUMP_INSTALL_NAME)$(man1ext): New.

2019-12-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92751
	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Fail
	when a clobber ends up in the partial-def vector.
	(vn_reference_lookup_3): Let clobbers be handled by the
	assignment from CTOR handling.

2019-12-03  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/92734
	* match.pd ((CST1 - A) +- CST2 -> CST3 - A,
	CST1 - (CST2 - A) -> CST3 + A): Handle nop casts around
	inner subtraction.

2019-12-03  Uroš Bizjak  <ubizjak@gmail.com>
	    Jakub Jelinek  <jakub@redhat.com>

	PR target/92744
	* config/i386/i386.md (peephole2 for *swap<mode>): Use
	general_reg_operand predicates instead of register_operand.

2019-12-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92645
	* tree-ssa.c (execute_update_addresses_taken): Avoid representing
	a full def of a vector via a BIT_INSERT_EXPR.

2019-12-02  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000-call.c (rs6000_invalid_builtin): Make
	static.
	* config/rs6000/rs6000-internal.h (rs6000_invalid_builtin): Remove
	decl.

2019-12-02  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/92741
	* fold-const.c (fold_convertible_p): Check vector types more
	thoroughly.

2019-12-02  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_report_sve_required): New function.
	(aarch64_expand_mov_immediate): Use it when attempting to measure
	the length of an SVE vector.
	(aarch64_mov_operand_p): Only allow SVE CNT immediates when
	SVE is enabled.

2019-12-02  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins.h
	(gimple_folder::force_vector): Declare.
	* config/aarch64/aarch64-sve-builtins.cc
	(gimple_folder::force_vector): New function.
	* config/aarch64/aarch64-sve-builtins-base.cc
	(svcmp_impl::fold): Likewise.
	(svdup_impl::fold): Handle svdup_z too.

2019-12-02  Martin Liska  <mliska@suse.cz>

	* ipa-devirt.c (warn_types_mismatch): Use get_odr_name_for_type
	function.
	(debug_tree_odr_name): New.
	* ipa-utils.h (get_odr_name_for_type): New.

2019-12-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92742
	* tree-vect-loop.c (vect_fixup_reduc_chain): Do not
	touch the def-type but verify it is consistent with the
	original stmts.

2019-12-02  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/92712
	* match.pd ((A * B) +- A -> (B +- 1) * A,
	A +- (A * B) -> (1 +- B) * A): Allow optimizing signed integers
	even when we don't know anything about range of A, but do know
	something about range of B and the simplification won't introduce
	new UB.

2019-12-02  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/92133
	* doc/invoke.texi (ipa-cp-max-recursive-depth): Document new option.
	(ipa-cp-min-recursive-probability): Likewise.
	* params.opt (ipa-cp-max-recursive-depth): New.
	(ipa-cp-min-recursive-probability): Likewise.
	* ipa-cp.c (ipcp_lattice<valtype>::add_value): Add two new parameters
	val_p and unlimited.
	(self_recursively_generated_p): New function.
	(get_val_across_arith_op): Likewise.
	(propagate_vals_across_arith_jfunc): Add constant propagation for
	self-recursive function.
	(incorporate_penalties): Do not penalize pure self-recursive function.
	(good_cloning_opportunity_p): Dump node_is_self_scc flag.
	(propagate_constants_topo): Set node_is_self_scc flag for cgraph node.
	(get_info_about_necessary_edges): Relax hotness check for edge to
	self-recursive function.
	* ipa-prop.h (ipa_node_params): Add new field node_is_self_scc.

2019-12-01  Sandra Loosemore  <sandra@codesourcery.com>

	PR target/92499

	* config/nios2/nios2.c (nios2_in_small_data_p): Do not consider
	objects of flexible types to be small if they have internal linkage
	or are declared extern.
	* config/nios2/nios2.h (ASM_OUTPUT_ALIGNED_LOCAL): Replace with...
	(ASM_OUTPUT_ALIGNED_DECL_LOCAL): ...this.  Use targetm.in_small_data_p
	instead of the size of the object initializer.
	* tree.c (flexible_array_type_p): Move from C front end, and
	generalize to handle fields in non-C structures.
	* tree.h (flexible_array_type_p): Declare.

2019-11-30  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.h (profile_count::operator<): Use IPA value for
	comparsion.
	(profile_count::operator>): Likewise.
	(profile_count::operator<=): Likewise.
	(profile_count::operator>=): Likewise.
	* predict.c (maybe_hot_count_p): Do not convert to gcov_type.

2019-11-30  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline.c (compute_max_insns): Return int64_t.
	(inline_small_functions): Simplify.

2019-11-30  Jan Hubicka  <hubicka@ucw.cz>

	* tree-cfg.c (execute_fixup_cfg): Update also max_bb_count when
	scaling happen.

2019-11-30  Jan Hubicka  <hubicka@ucw.cz>

	* cgraph.h (symtab_node): Add symver flag.
	* cgraphunit.c (process_symver_attribute): New.
	(process_common_attributes): Use process_symver_attribute.
	* lto-cgraph.c (lto_output_node): Stream symver.
	(lto_output_varpool_node): Stream symver.
	(input_overwrite_node): Stream symver.
	(input_varpool_node): Stream symver.
	* output.h (do_assemble_symver): Decalre.
	* symtab.c (symtab_node::dump_base): Dump symver.
	(symtab_node::verify_base): Verify symver.
	(symtab_node::resolve_alias): Handle symver.
	* varasm.c (do_assemble_symver): New function.
	* varpool.c (varpool_node::assemble_aliases): Use it.
	* doc/extend.texi: (symver attribute): Document.
	* config/elfos.h (ASM_OUTPUT_SYMVER_DIRECTIVE): New.

2019-11-30  Richard Sandiford  <richard.sandiford@arm.com>

	* target.h (type_context_kind): New enum.
	(verify_type_context): Declare.
	* target.def (verify_type_context): New target hook.
	* doc/tm.texi.in (TARGET_VERIFY_TYPE_CONTEXT): Likewise.
	* doc/tm.texi: Regenerate.
	* tree.c (verify_type_context): New function.
	* config/aarch64/aarch64-protos.h (aarch64_sve::verify_type_context):
	Declare.
	* config/aarch64/aarch64-sve-builtins.cc (verify_type_context):
	New function.
	* config/aarch64/aarch64.c (aarch64_verify_type_context): Likewise.
	(TARGET_VERIFY_TYPE_CONTEXT): Define.

2019-11-30  Jan Hubicka  <hubicka@ucw.cz>

	* cgraph.c (cgraph_node::dump): Dump unit_id and merged_extern_inline.
	* cgraph.h (cgraph_node): Add unit_id and
	merged_extern_inline.
	(symbol_table): Add max_unit.
	(symbol_table::symbol_table): Initialize it.
	* cgraphclones.c (duplicate_thunk_for_node): Copy unit_id.
	merged_comdat, merged_extern_inline.
	(cgraph_node::create_clone): Likewise.
	(cgraph_node::create_version_clone): Likewise.
	* ipa-fnsummary.c (dump_ipa_call_summary): Dump info about cross module
	calls.
	* ipa-fnsummary.h (cross_module_call_p): New inline function.
	* ipa-inline-analyssi.c (simple_edge_hints): Use it.
	* ipa-inline.c (inline_small_functions): Likewise.
	* lto-symtab.c (lto_cgraph_replace_node): Record merged_extern_inline;
	copy merged_comdat and merged_extern_inline.
	* lto-cgraph.c (lto_output_node): Stream out merged_comdat,
	merged_extern_inline and unit_id.
	(input_overwrite_node): Stream in these.
	(input_cgraph_1): Set unit_base.
	* lto-streamer.h (lto_file_decl_data): Add unit_base.
	* symtab.c (symtab_node::make_decl_local): Record former_comdat.

2019-11-30  Maciej W. Rozycki  <macro@wdc.com>

	* gcc.c (process_command): Only warn about an ineffective `-x'
	option if any input files have actually been supplied.

2019-11-30  Maciej W. Rozycki  <macro@wdc.com>

	* doc/install.texi (Options specification): Remove the list of
	target library subdirectories supporting
	`--enable-version-specific-runtime-libs'.  Document defaults for
	the option.

2019-11-29  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/92283
	* lra.c (lra): Update reg notes after inheritance sub-pass and
	before constraint sub-pass.

2019-11-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91003
	* tree-vect-slp.c (vect_mask_constant_operand_p): Pass in the
	operand number, avoid handling the non-condition operands of
	COND_EXPRs as comparisons.
	(vect_get_constant_vectors): Pass down the operand number.
	(vect_get_slp_defs): Likewise.

2019-11-29  Frederik Harwath  <frederik@codesourcery.com>

	* gimple-match-head.c (maybe_resimplify_conditional_op): Use
  	generic_expr_could_trap_p to check if the condition of COND_EXPR or
  	VEC_COND_EXPR can trap.

2019-11-29  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/92677
	* tree-vect-loop.c (vect_dissolve_slp_only_groups): Set the gap
	to zero when dissolving a group of strided accesses.

2019-11-29  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/92596
	* tree-vect-stmts.c (vectorizable_call): Punt on hybrid mask/nonmask
	operations.
	(vectorizable_operation): Likewise, instead of relying on
	vect_get_mask_type_for_stmt to do this.
	(vect_get_vector_types_for_stmt): Always return a vector type
	immediately, rather than deferring the choice for boolean results.
	Use a vector mask type instead of a normal vector if
	vect_use_mask_type_p.
	(vect_get_mask_type_for_stmt): Delete.
	* tree-vect-loop.c (vect_determine_vf_for_stmt_1): Remove
	mask_producers argument and special boolean_type_node handling.
	(vect_determine_vf_for_stmt): Remove mask_producers argument and
	update calls to vect_determine_vf_for_stmt_1.  Remove doubled call.
	(vect_determine_vectorization_factor): Update call accordingly.
	* tree-vect-slp.c (vect_build_slp_tree_1): Remove special
	boolean_type_node handling.
	(vect_slp_analyze_node_operations_1): Likewise.

2019-11-29  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (stmt_vec_info::mask_precision): New field.
	(vect_use_mask_type_p): New function.
	* tree-vect-patterns.c (vect_init_pattern_stmt): Copy the
	mask precision to the pattern statement.
	(append_pattern_def_seq): Add a scalar_type_for_mask parameter
	and use it to initialize the new stmt's mask precision.
	(search_type_for_mask_1): Delete.
	(search_type_for_mask): Replace with...
	(integer_type_for_mask): ...this new function.  Use the information
	cached in the stmt_vec_info.
	(vect_recog_bool_pattern): Update accordingly.
	(build_mask_conversion): Pass the scalar type associated with the
	mask type to append_pattern_def_seq.
	(vect_recog_mask_conversion_pattern): Likewise.  Call
	integer_type_for_mask instead of search_type_for_mask.
	(vect_convert_mask_for_vectype): Call integer_type_for_mask instead
	of search_type_for_mask.
	(possible_vector_mask_operation_p): New function.
	(vect_determine_mask_precision): Likewise.
	(vect_determine_stmt_precisions): Call it.

2019-11-29  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (get_mask_type_for_scalar_type): Replace
	the slp_tree parameter with a group size parameter.
	(vect_get_mask_type_for_stmt): Likewise.
	* tree-vect-stmts.c (get_mask_type_for_scalar_type): Likewise.
	(vect_get_mask_type_for_stmt): Likewise.
	* tree-vect-slp.c (vect_slp_analyze_node_operations_1): Update
	call accordingly.

2019-11-29  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vectorizable_operation): Punt early
	on codes that are handled elsewhere.

2019-11-29  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/sourcebuild.texi (vect_bool_cmp): Document.
	* tree-vect-patterns.c (search_type_for_mask_1): If neither
	operand to a boolean comparison is a natural vector mask,
	handle both operands like normal integers instead.

2019-11-29  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Bail
	out early for too large objects.

2019-11-29  Martin Jambor  <mjambor@suse.cz>

	PR ipa/92476
	* ipa-cp.c (set_single_call_flag): Set node_calling_single_call in
	the summary only if the summary exists.
	(find_more_scalar_values_for_callers_subset): Check node_dead in
	the summary only if the summary exists.
	(ipcp_store_bits_results): Ignore nodes without lattices.
	(ipcp_store_vr_results): Likewise.
	* cgraphclones.c: Include ipa-fnsummary.h and ipa-prop.h and the
	header files required by them.
	(cgraph_node::expand_all_artificial_thunks): Analyze expanded thunks.

2019-11-29  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/92710
	* tree-vect-stmts.c (vectorizable_simd_clone_call): Reject
	vector mask arguments.

2019-11-29  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.c (profile_count::to_cgraph_frequency,
	profile_count::to_sreal_scale): Check for compaibility of counts.
	* profile-count.h (compatible_p): Make public; add checking for
	global0 versus global types.
	* cgraph.c (cgraph_node::verify_node): Verify count compatibility.

2019-11-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92715
	* tree-ssa-forwprop.c (simplify_vector_constructor): Bail
	out for uniform vectors and source vectors with less elements
	than the destination.

2019-11-29  Martin Liska  <mliska@suse.cz>

	PR lto/91574
	* ipa-devirt.c (types_same_for_odr): Check for existence
	of TYPE_NAMEs first.

2019-11-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92704
	* tree-if-conv.c (combine_blocks): Deal with virtual PHIs
	in loops performing only loads.

2019-11-29  Julian Brown  <julian@codesourcery.com>

	* builtin-types.def (BT_DFLOAT32_PTR, BT_DFLOAT64_PTR,
	BT_DFLOAT128_PTR) Remove.
	* tree-core.h (TI_DFLOAT32_PTR_TYPE, TI_DFLOAT64_PTR_TYPE,
	TI_DFLOAT128_PTR_TYPE): Remove.
	* tree.c (build_common_type_nodes): Remove dfloat32_ptr_type_node,
	dfloat64_ptr_type_node and dfloat128_ptr_type_node initialisation.
	* tree.h (dfloat32_ptr_type_node, dfloat64_ptr_type_node,
	dfloat128_ptr_type_node): Remove macros.

2019-11-28  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (*movsi_internal1): Fix formatting.  Improve
	formatting.
	(*movdi_internal64): Ditto.

2019-11-28  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/92602
	* config/rs6000/rs6000.md (bswap<mode>2_load for HSI): Change the
	indexed_or_indirect_operand to be memory_operand.
	(bswap<mode>2_store for HSI): Ditto.
	(bswapdi2_load): Ditto.
	(bswapdi2_store): Ditto.

2019-11-28  Martin Liska  <mliska@suse.cz>

	PR debug/46558
	* dbgcnt.c (dbg_cnt_list_all_counters): Mark table
	headers for translation.

2019-11-28  Martin Liska  <mliska@suse.cz>

	PR lto/92609
	* ipa-devirt.c (warn_types_mismatch): Use TYPE_MAIN_VARIANT
	consistently.

2019-11-28  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline.c (want_early_inline_function_p): Remove leftover optimize
	checks.

2019-11-28  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.c (profile_count::combine_with_ipa_count): Return
	uninitialized count if called on ininitialized count.

2019-11-28  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline-transform.c (inline_transform): Scale profile before
	redirecting.

2019-11-28  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.h (profile_count::max): Work on profiles of different
	type.
	(profile_count::apply_scale): Be sure that ret is not local or global0
	type if num is global.

2019-11-28  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.h (profile_count::max): Work on profiles of different
	type.
	(profile_count::apply_scale): Be sure that ret is not local or global0
	type if num is global.

2019-11-28  Martin Jambor  <mjambor@suse.cz>

	PR ipa/92697
	* cgraph.c (cgraph_node_cannot_be_local_p_1): Return true for
	ifunc_resolvers.
	* symtab.c (symtab_node::dump_base): Dump ifunc_resolver flag.
	Removed trailig whitespace.

2019-11-28  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.h (profile_count::combine_with_ipa_count_within):
	Declare.
	* profile-count.c (profile_count::combine_with_ipa_count_within):
	New.
	* cgraphclones.c (cgraph_edge::clone, cgraph_node::create_clone): Use
	it.

2019-11-28  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-utils.c (ipa_merge_profiles): Be sure that all type transtions
	of counters are done same way.

2019-11-28  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-cp.c (update_profiling_info): Fix scaling.

2019-11-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92645
	* tree-inline.c (remap_gimple_stmt): When the return value
	is not wanted, elide GIMPLE_RETURN.

2019-11-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92645
	* tree-ssa-forwprop.c (get_bit_field_ref_def): Also handle
	conversions inside a mode class.  Remove restriction on
	preserving the element size.
	(simplify_vector_constructor): Deal with the above and for
	identity permutes also try using VEC_UNPACK_[FLOAT_]LO_EXPR
	and VEC_PACK_TRUNC_EXPR.

2019-11-28  Georg-Johann Lay  <avr@gjlay.de>

	Must use push insn to pass varargs arguments of DFmode because
	otherwise the middle-end generates wrong code.

	PR target/92055
	* config/avr/avr.md (MPUSH) [DF, DC]: Add modes to mode iterator.

2019-11-28  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/92691
	* tree-ssa-strlen.c (handle_store): Clarify return value meaning
	in function comment.
	(strlen_check_and_optimize_call): Likewise.  For handle_printf_call
	calls, return !handle_printf_call rather than always returning true.
	(check_and_optimize_stmt): Describe return value meaning in function
	comment.  Formatting fix.

2019-11-28  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.c (profile_count::to_sreal_scale): Handle correctly
	combination of globa0 and global counters..

2019-11-28  Kewen Lin  <linkw@gcc.gnu.org>

	PR target/92566
	* config/rs6000/rs6000.c (rs6000_preferred_simd_mode): Check
	by VECTOR_UNIT_NONE_P instead.

2019-11-28  Hongtao Liu  <hongtao.liu@inte.com>

	* config/i386/sse.md (avx512f_maskcmp<mode>3):
	Refine VF to VF_AVX512VL.

2019-11-27  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.md (movsi_internal): Reformat.
	(movdi_internal64): Reformat.

2019-11-27  Peter Bergner <bergner@linux.ibm.com>

	PR bootstrap/92661
	* config/rs6000/rs6000-call.c: (def_builtin): Do not define the
	builtin if we don't have an actual type.
	(builtin_function_type): If the builtin function uses a DFP type
	and decimal float has been disabled, then return NULL_TREE.

2019-11-27  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/92510
	* combine.c (gen_lowpart_for_combine): Only transform lowpart subreg
	of comparison into a comparison with different mode if both imode and
	omode are scalar integral modes.

2019-11-27  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/90007
	* recog.c (constrain_operands): Permit hard registers too for
	memory when LRA is used.

2019-11-27  Bernd Schmidt  <bernds_cb1@t-online.de>

	* config/m68k/m68k.c (m68k_output_compare_fp): Restore differences
	between Coldfire and regular m68k.
	* config/m68k/m68k.md (cmp1_cf_constraints): Disallow constants.

2019-11-27  Richard Biener  <rguenther@suse.de>

	* target.def (TARGET_VECTORIZE_BUILTIN_CONVERSION): Remove.
	* targhooks.c (default_builtin_vectorized_conversion): Likewise.
	* targhooks.h (default_builtin_vectorized_conversion): Likewise.
	* optabs-tree.c (supportable_convert_operation): Do not call
	targetm.vectorize.builtin_conversion.  Remove unused decl parameter.
	* optabs-tree.h (supportable_convert_operation): Adjust.
	* doc/tm.texi.in (TARGET_VECTORIZE_BUILTIN_CONVERSION): Remove.
	* doc/tm.texi: Regenerate.
	* tree-ssa-forwprop.c (simplify_vector_constructor): Adjust.
	* tree-vect-generic.c (expand_vector_conversion): Likewise.
	* tree-vect-stmts.c (vect_gen_widened_results_half): Remove
	unused decl parameter and adjust.
	(vect_create_vectorized_promotion_stmts): Likewise.
	(vectorizable_conversion): Adjust.

2019-11-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92690
	* tree-ssa-forwprop.c (simplify_vector_constructor): Avoid
	converting elements not originally converted.

2019-11-27  Tobias Burnus  <tobias@codesourcery.com>

	PR middle-end/92463
	* builtins.c (do_mpfr_ckconv, do_mpc_ckconv, do_mpfr_remquo,
	do_mpfr_lgamma_r, do_mpc_arg2): Use MPFR_RNDx instead of GMP_RNDx,
	mpfr_rnd_t instead of mp_rnd_t.
	* fold-const-call.c (do_mpfr_ckconv, do_mpfr_arg1, do_mpfr_sincos,
	do_mpfr_arg2, do_mpfr_arg3, do_mpc_arg1, do_mpc_arg2): Likewise.
	* gimple-ssa-sprintf.c (format_floating_max, format_floating):
	Use mpfr_exp_t instead of mp_exp_t.
	* real.c (real_from_string, dconst_e_ptr, dconst_sqrt2_ptr): Use
	MPFR_RNDx instead of GMP_RNDx.
	* realmpfr.c (real_from_mpfr, mpfr_from_real): Use mpfr_rnd_t and
	mpfr_exp_t instead mp_rnd_t and mp_exp_t, respectively.
	* realmpfr.h (real_from_mpfr, mpfr_from_real): Use mpfr_rnd_t instead
	of mp_rnd_t and remove MPFR_RNDx poisoning.
	* ubsan.c (ubsan_instrument_float_cast): MPFR_RNDx instead of GMP_RNDx.

2019-11-27  Kewen Lin  <linkw@gcc.gnu.org>

	PR tree-optimization/91790
	* tree-vect-stmts.c (vectorizable_load): Use the adjusted
	DR for vect_setup_realignment when first_stmt_info is different
	from first_stmt_info_for_drptr.

2019-11-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92645
	* tree-ssa-forwprop.c (simplify_vector_constructor): Handle
	CTORs with just a subset of the original vectors.

2019-11-27  Richard Biener  <rguenther@suse.de>

	PR middle-end/92674
	* tree-inline.c (expand_call_inline): Delay purging EH/abnormal
	edges and instead record blocks in bitmap.
	(gimple_expand_calls_inline): Adjust.
	(fold_marked_statements): Delay EH cleanup until all folding is
	done.
	(optimize_inline_calls): Do EH/abnormal cleanup for calls after
	inlining finished.

2019-11-27  Bernd Schmidt  <bernds_cb1@t-online.de>

	* auto-inc-dec.c (merge_in_block): Allow autoinc in jumps unless
	LRA is enabled.
	* combine.c (can_combine_p): Disallow autoinc in jumps unless LRA is
	disabled.

2019-11-27  Jakub Jelinek  <jakub@redhat.com>

	PR debug/92664
	* dwarf2out.c (lookup_filename): Use "<stdin>" instead of "".

2019-11-26  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/92683
	* gimple-fold.c (gimple_fold_builtin_string_compare): Restore a test
	inadvertently removed in a previous change.  Rename local variable
	for clarity.

2019-11-26  Richard Biener  <rguenther@suse.de>

	PR middle-end/92669
	* cfganal.c (pre_and_rev_post_order_compute_fn): Deal with
	NULL pre_order.

2019-11-26  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/linux.h: Add undef for MUSL_DYNAMIC_LINKERxx.

2019-11-26  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/92644
	* tree-ssa-phiopt.c (minmax_replacement): Add INTEGRAL_TYPE_P check
	next to INTEGER_CST checks.

2019-11-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92645
	* tree-vect-slp.c (vect_build_slp_tree_2): For unary ops
	do not build the operation from scalars if the operand is.

2019-11-25  Tobias Burnus  <tobias@codesourcery.com>

	* config/gcn/mkoffload.c (COMMENT_PREFIX, struct id_map,
	func_ids, funcs_tail, var_ids, vars_tail) Remove unused
	definitions.

2019-11-25  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sem_item_optimizer::dump_cong_classes): Clean
	up used dump message.

2019-11-25  Martin Liska  <mliska@suse.cz>

	PR bootstrap/92653
	* ipa-fnsummary.c (ipa_fn_summary::account_size_time): Comment out
	too strict checking assert.

2019-11-25  Joseph Myers  <joseph@codesourcery.com>

	PR c/91985
	* builtin-types.def (BT_DFLOAT32, BT_DFLOAT64, BT_DFLOAT128)
	(BT_DFLOAT32_PTR, BT_DFLOAT64_PTR, BT_DFLOAT128_PTR): Define to
	error_mark_node if corresponding global tree node is NULL.
	* tree.c (build_common_tree_nodes): Do not initialize
	dfloat32_type_node, dfloat64_type_node or dfloat128_type_node if
	decimal floating-point not supported.

2019-11-25  Joseph Myers  <joseph@codesourcery.com>

	* attribs.c (decl_attributes): Do not ignore C++11 attributes on
	types.

2019-11-25  Bernd Schmidt  <bernds_cb1@t-online.de>

	* config/m68k/m68k.c (output_move_himode, output_move_qimode):
	Replace code for non-CONST_INT constants with gcc_unreachable.
	* config/m68k/m68k.md (cbranchdi): Don't generate individual
	compare and test.
	(CMPMODE): New mode_iterator.
	(cbranchsi4, cbranchqi4, cbranchhi4): Replace expanders with
	cbranch<mode>4.
	(cstoresi4, cstoreqi4, cstorehi4): Replace expanders with
	cstore<mode>4.
	(cmp<mode>_68881): Remove 'F' constraint from first comparison
	operand.
	(bit test insns patterns): Use nonimmediate_operand, not
	register_operand, for source operands that allow memory in
	their constraints.
	(divmodsi4, udivmodsi4, divmodhi4 and related unnamed patterns):
	Use register_operand, not nonimmediate_operand, for the
	destinations.
	(DBCC): New mode_iterator.
	(dbcc peepholes): Use it to reduce duplication.
	(trap): Use const_true_rtx, not const1_rtx.
	* config/m68k/predicates.md (m68k_comparison_operand): Renamed
	from m68k_subword_comparison_operand and changed to handle
	SImode.

	PR target/91851
	* config/m68k/m68k-protos.h (output-dbcc_and_branch): Adjust
	declaration.
	(m68k_init_cc): New declaration.
	(m68k_output_compare_di, m68k_output_compare_si)
	(m68k_output_compare_hi, m68k_output_compare_qi)
	(m68k_output_compare_fp, m68k_output_btst, m68k_output_bftst)
	(m68k_find_flags_value, m68k_output_scc, m68k_output_scc_float)
	(m68k_output_branch_integer, m68k_output_branch_integer_rev.
	m68k_output_branch_float, m68k_output_branch_float_rev):
	Likewise.
	(valid_dbcc_comparison_p_2, flags_in_68881)
	(output_btst): Remove declaration.
	* config/m68k/m68k.c (INCLDUE_STRING): Define.
	(TARGET_ASM_FINAL_POSTSCAN_INSN): Define.
	(valid_dbcc_comparison_p_2, flags_in_68881): Delete functions.
	(flags_compare_op0, flags_compare_op1, flags_operand1,
	flags_operand2, flags_valid): New static variables.
	(m68k_find_flags_value, m68k_init_cc): New functions.
	(handle_flags_for_move, m68k_asm_final_postscan_insn,
	remember_compare_flags): New static functions.
	(output_dbcc_and_branch): New argument CODE.  Use it, and add
	PLUS and MINUS to the possible codes.  All callers changed.
	(m68k_output_btst): Renamed from output_btst.  Remove OPERANDS
	and INSN arguments, add CODE arg.  Return the comparison code
	to use.  All callers changed.  Use CODE instead of
	next_insn_tests_no_inequality, and replace cc_status management
	with changing the return code.
	(m68k_rtx_costs): Instead of testing for COMPARE, test for
	RTX_COMPARE or RTX_COMM_COMPARE.
	(output_move_simode, output_move_qimode): Call
	handle_flags_for_move.
	(notice_update_cc): Delete function.
	(m68k_output_bftst, m68k_output_compare_di, m68k_output_compare_si,
	m68k_output_compare_hi, m68k_output_compare_qi,
	m68k_output_compare_fp, m68k_output_branch_integer,
	m68k_output_branch_integer_rev, m68k_output_scc,
	m68k_output_branch_float, m68k_output_branch_float_rev,
	m68k_output_scc_float): New functions.
	(output_andsi3, output_iorsi3, output_xorsi3): Call CC_STATUS_INIT
	once at the start, and set flags_valid and flags_operand1 if the
	flags are usable.
	* config/m68k/m68k.h (CC_IN_68881, NOTICE_UPDATE_CC,
	CC_OVERFLOW_UNUSABLE, CC_NO_CARRY, OUTPUT_JUMP): Remove
	definitions.
	(CC_STATUS_INIT): Define.
	* config/m68k/m68k.md (flags_valid): New define_attr.
	(tstdi, tstsi_internal_68020_cf, tstsi_internal, tsthi_internal,
	tstqi_internal, tst<mode>_68881, tst<mode>_cf, cmpdi_internal,
	cmpdi, unnamed cmpsi/cmphi/cmpqi patterns, cmpsi_cf,
	cmp<mode>_68881, cmp<mode>_cf, unnamed btst patterns,
	tst_bftst_reg, tst_bftst_reg, unnamed scc patterns, scc,
	sls, sordered_1, sunordered_1, suneq_1, sunge_1, sungt_1,
	sunle_1, sunlt_1, sltgt_1, fsogt_1, fsoge_1, fsolt_1, fsole_1,
	bge0_di, blt0_di, beq, bne, bgt, bgtu, blt, bltu, bge, bgeu,
	ble, bleu, bordered, bunordered, buneq, bunge, bungt, bunle,
	bunlt, bltgt, beq_rev, bne_rev, bgt_rev, bgtu_rev,
	blt_rev, bltu_rev, bge_rev, bgeu_rev, ble_rev, bleu_rev,
	bordered_rev, bunordered_rev, buneq_rev, bunge_rv, bungt_rev,
	bunle_rev, bunlt_rev, bltgt_rev, ctrapdi4, ctrapsi4, ctraphi4,
	ctrapqi4, conditional_trap): Delete patterns.
	(cbranchdi4_insn): New pattern.
	(cbranchdi4): Don't generate cc0 patterns.  When testing LT or GE,
	test high part only.  When testing EQ or NE, generate beq0_di
	and bne0_di patterns directly.
	(cstoredi4): When testing LT or GE, test high part only.
	(both sets of cbranch<mode>4, cstore<mode>4): Don't generate cc0
	patterns.
	(scc0_constraints, cmp1_constraints, cmp2_constraints,
	scc0_cf_constraints, cmp1_cf_constraints, cmp2_cf_constraints,
	cmp2_cf_predicate): New define_mode_attrs.
	(cbranch<mode>4_insn, cbranch<mode>4_insn_rev,
	cbranch<mode>4_insn_cf, cbranch<mode>4_insn_cf_rev,
	cstore<mode>4_insn, cstore<mode>4_insn_cf for integer modes)
	New patterns.
	(cbranch<mode>4_insn_68881, cbranch<mode>4_insn_rev_68881):
	(cbranch<mode>4_insn_cf, cbranch<mode>4_insn_rev_cf,
	cstore<mode>4_insn_68881, cstore<mode>4_insn_cf for FP):
	New patterns.
	(cbranchsi4_btst_mem_insn, cbranchsi4_btst_reg_insn,
	cbranchsi4_btst_mem_insn_1, cbranchsi4_btst_reg_insn_1):
	Likewise.
	(BTST): New define_mode_iterator.
	(btst_predicate, btst_constraint, btst_range): New
	define_mode_attrs.
	(cbranch_bftst<mode>_insn, cstore_bftst<mode>_insn): New
	patterns.
	(movsi_m68k_movsi_m68k2, movsi_cf, unnamed movstrict patterns,
	unnamed movhi and movqi patterns, unnamed movsf, movdf and movxf
	patterns): Set attr "flags_valid".
	(truncsiqi2, trunchiqi2, truncsihi2): Remove manual CC_STATUS
	management.  Set attr "flags_valid".
	(extendsidi2, extendplussidi, unnamed float_extendsfdf pattern,
	extendsfdf2_cf, fix_truncdfsi2, fix_truncdfhi2, fix_truncdfqi2,
	addi_sexthishl32, adddi_dilshr32, adddi_dilshr32_cf,
	addi_dishl32, subdi_sexthishl32, subdi_dishl32, subdi3): Remove
	manual CC_STATUS management.
	(addsi3_internal, addhi3, addqi3, subsi3, subhi3, subqi3,
	unnamed strict_lowpart subhi and subqi patterns): Set attr
	"flags_valid".
	(unnamed strict_lowpart addhi3 and addqi3 patterns): Likewise.
	Remove code to operate on address regs and assert the case
	does not occur.
	(unnamed mulsidi patterns, divmodhi4, udivmodhi4): Remove
	manual CC_STATUS_INIT.
	(andsi3_internal, andhi3, andqi3, iorsi3_internal, iorhi3, iorqi3,
	xorsi3_internal, xorhi3, xorqi3, negsi2_internal,
	negsi2_5200, neghi2, negqi2, one_cmplsi2_internal, one_cmplhi2,
	one_cmplqi2, unnamed strict_lowpart patterns
	for andhi, andqi, iorhi, iorqi, xorhi, xorqi, neghi, negqi,
	one_cmplhi and one_cmplqi): Set attr "flags_valid".
	(iorsi_zext_ashl16, iorsi_zext): Remove manual CC_STATUS_INIT.
	(ashldi_sexthi, ashlsi_16, ashlsi_17_24): Remove manual
	CC_STATUS_INIT.
	(ashlsi3, ashlhi3, ashlqi3, ashrsi3, ashrhi3, ashrqi3, lshrsi3,
	lshrhi3, shrqi3, rotlsi3, rotlhi3, rotlhi3_lowpart, rotlqi3,
	rotlqi3_lowpart, rotrsi3, rotrhi3, rotrhi_lowpart, rotrqi3,
	unnamed strict_low_part patterns for HI and
	QI versions): Set attr "flags_valid".
	(bsetmemqi, bsetmemqi_ext, bsetdreg, bchgdreg, bclrdreg,
	bclrmemqi, extzv_8_16_reg, extzv_bfextu_mem, insv_bfchg_mem,
	insv_bfclr_mem, insv_bfset_mem, extv_bfextu_reg,
	insv_bfclr_reg, insv_bfset_reg, dbne_hi, dbne_si, dbge_hi,
	dbge_si, extendsfxf2, extenddfxf2, ): Remove manual cc_status management.
	(various unnamed peepholes): Adjust compare/branch sequences
	for new cbranch patterns.
	(dbcc peepholes): Likewise, and output the comparison here
	as well.
	* config/m68k/predicates.md (valid_dbcc_comparison_p): Delete.
	(fp_src_operand): Allow constant zero.
	(address_reg_operand): New predicate.

	* rtl.h (inequality_comparisons_p): Remove declaration.
	* recog.h (next_insn_tests_no_inequality): Likewise.
	* rtlanal.c (inequality_comparisons_p): Delete function.
	* recog.c (next_insn_tests_no_inequality): Likewise.

2019-11-25  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_detect_hybrid_slp_stmts): Add assertion.
	(vect_detect_hybrid_slp): Swap lane and instance iteration,
	properly re-building the visited hash-map for each lane.

2019-11-25  Tobias Burnus  <tobias@codesourcery.com>

	* config/gcn/gcn.c (gcn_expand_scalar_to_vector_address,
	gcn_md_reorg): Remove unused variables.
	(gcn_emutls_var_init): Add missing (but unreachable) return
	to silence warning.
	(gcn_hsa_declare_function_name): Add gcc_unreachable to ensure
	target != TARGET_GCN3 or TARGET_GCN3 will fail instead of use
	an uninitialized variable.

2019-11-25  Martin Jambor  <mjambor@suse.cz>

	PR ipa/92109
	* cgraph.h (cgraph_node::remove_from_clone_tree): Declare.
	* cgraphclones.c (cgraph_node::remove_from_clone_tree): New method.
	(cgraph_materialize_clone): Move removel from clone tree to the
	the new method and use it instead.
	* ipa.c (symbol_table::remove_unreachable_nodes): When removing
	bodies of clones, also remove it from the clone tree.

2019-11-25  Martin Jambor  <mjambor@suse.cz>

	PR ipa/91956
	* ipa-sra.c (process_isra_node_results): Put the new node to the
	same comdat group as the original node.

2019-11-25  Georg-Johann Lay  <avr@gjlay.de>

	Build double32 / long-double32 multilibs if needed.

	PR target/92055
	* config/avr/t-avr:
	(HAVE_DOUBLE_MULTILIB, HAVE_LONG_DOUBLE_MULTILIB): Remove vars.
	(HAVE_DOUBLE32, HAVE_LONG_DOUBLE32, WITH_LONG_DOUBLE)
	(HAVE_DOUBLE64, HAVE_LONG_DOUBLE64, WITH_DOUBLE): Set from
	tm_defines and pass to genmultilib.awk.
	* config/avr/genmultilib.awk: Use these variables to add double32
	and / or long-double32 multilib(s) as needed.
	* config/avr/driver-avr.c (avr_double_lib): Adjust comment.

2019-11-25  Richard Biener  <rguenther@suse.de>

	* cfgloop.h (get_loop_exit_edges): Add extra parameter denoting
	loop body, defaulted to NULL.
	(single_likely_exit): Add exit vector argument
	* tree-ssa-loop-niter.h (loop_only_exit_p): Add loop body argument.
	(number_of_iterations_exit): Likewise.
	(number_of_iterations_exit_assumptions): Likewise.
	* cfgloop.c (get_loop_exit_edges): Use passed in loop body
	if not NULL.
	* cfgloopanal.c (single_likely_exit): Use passed in exit vector.
	* tree-ssa-loop-ivcanon.c (canonicalize_loop_induction_variables):
	Compute exit vector around call to single_likely_exit.
	* tree-ssa-loop-ivopts.c (tree_ssa_iv_optimize_loop): Pass down
	loop body to loop_only_exit_p.
	* tree-ssa-loop-niter.c (loop_only_exit_p): Get loop body from
	caller.
	(number_of_iterations_exit_assumptions): Get loop body from caller
	if not NULL.
	(number_of_iterations_exit): Pass through new loop body arg.
	(infer_loop_bounds_from_undefined): Get loop body from caller.
	(estimate_numbers_of_iterations): Compute loop body once.

2019-11-25  Richard Biener  <rguenther@suse.de>

	* cfganal.c (pre_and_rev_post_order_compute_fn): Use an
	auto_bb_flag instead of an sbitmap for visited handling.

2019-11-25 Kewen Lin  <linkw@gcc.gnu.org>

	* config/rs6000/vector.md (vector_fp_comparison_simple): New code
	iterator.
	(vector_fp_comparison_complex): Likewise.
	(vector_<code><mode> for VEC_F and vector_fp_comparison_simple): New
	define_and_split.
	(vector_<code><mode> for VEC_F and vector_fp_comparison_complex):
	Likewise.
	(vector_lt<mode> for VEC_F): Refactor with
	vector_fp_comparison_simple.
	(vector_le<mode> for VEC_F): Likewise.
	(vector_unge<mode> for VEC_F): Likewise.
	(vector_unle<mode> for VEC_F): Likewise.
	(vector_ne<mode> for VEC_F): Likewise.
	(vector_ungt<mode> for VEC_F): Likewise.
	(vector_unlt<mode> for VEC_F): Likewise.
	(vector_ltgt<mode> for VEC_F): Refactor with
	vector_fp_comparison_complex.
	(vector_ordered<mode> for VEC_F): Likewise.
	(vector_uneq<mode> for VEC_F): Likewise.
	(vector_unordered<mode> for VEC_F): Likewise.

2019-11-24  Bernd Schmidt  <bernds_cb1@t-online.de>

	* config/i386/i386.c (ix86_rtx_costs): Handle care of a PLUS in a
	COMPARE, representing an overflow detection.

	* combine.c (combine_instructions): Record costs for jumps.

	* combine.c (can_combine_p): Allow autoinc in jumps.

2019-11-23  Jan Hubicka  <hubicka@ucw.cz>

	* cif-code.def (MAX_INLINE_INSNS_SINGLE_O2_LIMIT): Remove.
	* doc/invoke.texi (max-inline-insns-single-O2,
	inline-heuristics-hint-percent-O2, inline-min-speedup-O2,
	early-inlining-insns-O2): Remove documentation.
	* ipa-fnsummary.c (analyze_function_body,
	compute_fn_summary): Use opt_for_fn when accessing parameters.
	* ipa-inline.c (caller_growth_limits, can_inline_edge_p,
	inline_insns_auto, can_inline_edge_by_limits_p,
	want_early_inline_function_p, big_speedup_p,
	want_inline_small_function_p, want_inline_self_recursive_call_p,
	recursive_inlining, compute_max_insns, inline_small_functions):
	Likewise.
	* opts.c (default_options): Add -O3 defaults for
	OPT__param_early_inlining_insns_,
	OPT__param_inline_heuristics_hint_percent_,
	OPT__param_inline_min_speedup_, OPT__param_max_inline_insns_single_.
	* params.opt (-param=early-inlining-insns-O2=,
	-param=inline-heuristics-hint-percent-O2=,
	-param=inline-min-speedup-O2=, -param=max-inline-insns-single-O2=
	-param=early-inlining-insns=, -param=inline-heuristics-hint-percent=,
	-param=inline-min-speedup=, -param=inline-unit-growth=,
	-param=large-function-growth=, -param=large-stack-frame=,
	-param=large-stack-frame-growth=, -param=large-unit-insns=,
	-param=max-inline-insns-recursive=,
	-param=max-inline-insns-recursive-auto=,
	-param=max-inline-insns-single=,
	-param=max-inline-insns-size=, -param=max-inline-insns-small=,
	-param=max-inline-recursive-depth=,
	-param=max-inline-recursive-depth-auto=,
	-param=min-inline-recursive-probability=,
	-param=partial-inlining-entry-probability=,
	-param=uninlined-function-insns=, -param=uninlined-function-time=,
	-param=uninlined-thunk-insns=, -param=uninlined-thunk-time=): Add
	Optimization.

2019-11-23  Jakub Jelinek  <jakub@redhat.com>

	* ipa-fnsummary.c: Fix comment typos.
	* ipa-ref.h: Likewise.
	* ipa-predicate.h: Likewise.
	* ipa-split.c: Likewise.
	* ipa-inline-analysis.c: Likewise.
	* ipa-predicate.c: Likewise.
	* ipa-devirt.c: Likewise.
	* ipa-icf.h: Likewise.
	* profile-count.c: Likewise.
	* ipa-icf.c: Likewise.
	(sem_function::equals_wpa): Fix typos in dump messages.
	* ipa-icf-gimple.h: Fix comment typos.
	* ipa-inline-transform.c: Likewise.
	* ipa-polymorphic-call.c: Likewise.
	* ipa-fnsummary.h: Likewise.
	* ipa-inline.c: Likewise.
	(dump_inline_stats): Fix typo in debug dump message.
	* profile-count.h: Fix comment typos.

	PR target/92615
	* config/i386/i386.c (ix86_md_asm_adjust): If dest_mode is
	GET_MODE (dest), is not QImode, using ZERO_EXTEND and dest is not
	register_operand, force x into register before storing it into dest.
	Formatting fix.

	PR middle-end/83859
	* doc/extend.texi (attribute access): Fix a typo.

	PR rtl-optimization/92610
	* cse.c (rest_of_handle_cse2): Call cleanup_cfg (0) also if
	cse_cfg_altered is set, even when tem is 0.
	(rest_of_handle_cse_after_global_opts): Likewise.

2019-11-22  Jakub Jelinek  <jakub@redhat.com>

	PR c++/92458
	* tree-hash-traits.h (tree_decl_hash, tree_ssa_name_hash,
	tree_hash): Move to ...
	* tree.h (tree_decl_hash, tree_ssa_name_hash, tree_hash): ... here.
	(struct decl_tree_cache_traits, struct type_tree_cache_traits): New
	types.
	(decl_tree_cache_map, tree_tree_cache_map): New typedefs.

	PR tree-optimization/92618
	* tree-ssa-reassoc.c (v_info): Change from auto_vec to a struct
	containing the auto_vec and a tree.
	(undistribute_bitref_for_vector): Handle the case when element type
	of vec is not the same as type of the BIT_FIELD_REF.  Formatting
	fixes.

2019-11-22  Martin Sebor  <msebor@redhat.com>

	PR middle-end/83859
	* attribs.h (struct attr_access): New.
	* attribs.c (decl_attributes): Add an informational note.
	* builtins.c (check_access): Make extern.  Consistently set no-warning
	after issuing a warning.  Handle calls through function pointers.  Set
	no-warning.
	* builtins.h (check_access): Declare.
	* calls.c (rdwr_access_hash): New type.
	(rdwr_map): Same.
	(init_attr_rdwr_indices): New function.
	(maybe_warn_rdwr_sizes): Same.
	(initialize_argument_information): Call init_attr_rdwr_indices.
	Call maybe_warn_rdwr_sizes.
	(get_size_range): Avoid null argument.
	* doc/extend.texi (attribute access): Document new attribute.

2019-11-22  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.c (OMP_LDS_SIZE): Define.
	(ACC_LDS_SIZE): Define.
	(OTHER_LDS_SIZE): Define.
	(LDS_SIZE): Redefine using above.
	(gcn_expand_prologue): Initialize m0 with LDS_SIZE-1.

2019-11-22  Martin Sebor  <msebor@redhat.com>

	PR middle-end/88226
	* builtins.c (check_nul_terminated_array): New function.
	(fold_builtin_0): Remove declaration.
	(fold_builtin_1): Same.
	(fold_builtin_2): Same.
	(fold_builtin_3): Same.
	(fold_builtin_strpbrk): Add argument.
	(fold_builtin_strspn): Same.
	(fold_builtin_strcspn): Same.
	(expand_builtin_strcat): Call it.  Remove unused argument.
	(expand_builtin_stpncpy): Same.
	(expand_builtin_strncat): Same.
	(expand_builtin_strncpy): Same.  Adjust indentation.
	(expand_builtin_strcmp): Same.
	(expand_builtin_strncmp): Same.
	(expand_builtin_fork_or_exec): Same.
	(expand_builtin): Handle more built-ins.
	(fold_builtin_2): Add argument.
	(fold_builtin_n): Make static.  Add argument.
	(fold_call_expr): Pass new argument to fold_builtin_n and fold_builtin_2.
	(fold_builtin_call_array): Pass new argument to fold_builtin_n.
	(fold_builtin_strpbrk): Add argument.  Call check_nul_terminated_array.
	(fold_call_stmt): Pass new argument to fold_builtin_n.
	* builtins.h: Correct a comment.
	* gimple-fold.c (gimple_fold_builtin_strchr): Call
	check_nul_terminated_array.
	* tree-ssa-strlen.c (handle_builtin_strlen): Call
	check_nul_terminated_array.
	(handle_builtin_strchr): Same.
	(handle_builtin_string_cmp): Same.

2019-11-22  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/92501
	* gimple-fold.c ((gimple_fold_builtin_string_compare): Let strncmp
	handle unterminated arrays.  Rename local variables for clarity.

2019-11-22  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.c (gcn_hsa_declare_function_name): Calculate
	granulated_sgprs according to architecture.

2019-11-22  Jan Hubicka  <jh@suse.cz>

	* ggc-page.c (ggc_collect): Call memory_block_pool::trim.
	* memory-block.cc (memory_block_pool::clear_free_list): Rename to ...
	(memory_block_pool::reduce_free_list): ... this one.
	(memory_block_pool::trim): New static function.
	* memory-block.h (memory_block_pool::freelist_size): New constant
	(memory_block_pool::clear_free_list): Rename to ...
	(memory_block_pool::reduce_free_list): ... this one.
	(memory_block_pool::trim): Declare.

2019-11-22  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vect_model_simple_cost): Take an optional
	vect_cost_for_stmt.
	(vectorizable_condition): Calculate the cost of EXTRACT_LAST_REDUCTION
	here rather than...
	* tree-vect-loop.c (vect_model_reduction_cost): ...here.

2019-11-22  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (bic_f): Use cc_set_register predicate.
	(bic_cmp0_noout): New pattern.
	(bic_cmp0): Likewise.
	(neg_scc_insn): Remove pattern.
	(not_scc_insn): Likewise.

2019-11-21  Harald van Dijk  <harald@gigawatt.nl>

	* doc/invoke.texi (-fcommon): Remove claim about ISO C.

2019-11-21  Joseph Myers  <joseph@codesourcery.com>

	* gimplify.c (expand_FALLTHROUGH_r, expand_FALLTHROUGH): Use
	pedwarn instead of warning_at for fallthrough not preceding a case
	or default label.

2019-11-22  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/92608
	* tree-ssa-loop-unswitch.c (find_loop_guard): Use safe_dyn_cast instead
	of dyn_cast.

2019-11-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/predicates.md (extra_insn_branch_comparison_operator):
	New predicate.
	* config/rs6000/rs6000-protos.h (rs6000_emit_fp_cror): New declaration.
	* config/rs6000/rs6000.c (rs6000_generate_compare): Don't do anything
	special for FP comparisons that need a cror instruction eventually.
	(rs6000_emit_fp_cror): New function.
	(rs6000_emit_sCOND): Expand all floating point comparisons to one
	instruction, for normal FP modes, with HONOR_NANS.
	(rs6000_emit_cbranch): Reformat.
	* config/rs6000/rs6000.md (fp_rev): New iterator.
	(fp_two): New iterator.
	*<code><mode>_cc for fp_rev and GPR: New define_insn_and_split.
	*<code><mode>_cc for fp_two and GPR: New define_insn_and_split.
	*cbranch_2insn: New define_insn_and_split.

2019-11-21  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/92526
	* tree-vect-data-refs.c (vect_enhance_data_refs_alignment): Reject
	versioning for alignment if the accesses do not have a consistent
	mask, rather than asserting that the masks are consistent.

2019-11-21  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/92595
	* tree-vect-stmts.c (get_group_load_store_type): Add a VECTOR_MODE_P
	check.
	(vectorizable_store, vectorizable_load): Likewise.

2019-11-21  Jan Hubicka  <jh@suse.cz>

	* ipa-inline.c (update_callee_keys): Add parameter UPDATE_SINCE.
	(resolve_noninline_speculation, inline_small_functions): Avoid
	redundant updates.

2019-11-21  Richard Biener  <rguenther@suse.de>

	* lra.c (lra_insn_recog_data_pool): New.
	(free_insn_recog_data): Adjust.
	(finish_insn_recog_data): Release lra_insn_recog_data_pool.
	(lra_set_insn_recog_data): Allocate from lra_insn_recog_data_pool.

2019-11-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92596
	* tree-vect-slp.c (vect_build_slp_tree): Fix pasto.

2019-11-21  Jan Hubicka  <jh@suse.cz>

	* ipa-fnsummary.c (evaluate_conditions_for_known_args): Be
	ready for some vectors to not be allocated.
	(evaluate_properties_for_edge): Document better; make
	known_vals and known_aggs caller allocated; avoid determining
	values of parameters which are not used.
	(ipa_merge_fn_summary_after_inlining): Pre allocate known_vals and
	known_aggs.
	* ipa-inline-analysis.c (do_estimate_edge_time): Likewise.
	(do_estimate_edge_size): Likewise.
	(do_estimate_edge_hints): Likewise.
	* ipa-cp.c (ipa_get_indirect_edge_target_1): Do not early exit when
	values are not known.
	(ipa_release_agg_values): Add option to not release vector itself.
	* ipa-prop.h (ipa_release_agg_values): Add parameter RELEASE_VECTOR.

2019-11-21  Richard Biener  <rguenther@suse.de>

	* cfgloop.h (loop_iterator::~loop_iterator): Remove.
	(loop_iterator::to_visit): Use an auto_vec with internal storage.
	(loop_iterator::loop_iterator): Adjust.
	* cfganal.c (compute_dominance_frontiers_1): Fold into...
	(compute_dominance_frontiers): ... this.  Hoist invariant
	get_immediate_dominator call.
	(compute_idf): Use a work-set instead of a work-list for more
	optimal iteration order and duplicate avoidance.
	* tree-into-ssa.c (mark_phi_for_rewrite): Avoid re-allocating
	the vector all the time, instead pre-allocate the vector only
	once.
	(delete_update_ssa): Simplify.
	* vec.h (va_heap::release): Disable -Wfree-nonheap-object around it.

2019-11-21  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91355
	* tree-ssa-sink.c (select_best_block): Use >= rather than >
	for early_bb scaled count with best_bb count comparison.

	* ipa-fnsummary.h (enum ipa_hints_vals): Fix comment typo,
	preffer -> prefer.
	* ipa-inline.c (edge_badness): Likewise.
	* lto-streamer.h (class lto_location_cache): Likewise.
	* tree-ssa-sink.c (select_best_block): Likewise.  Fix comment typos,
	gratutious -> gratuitous.

2019-11-21  Richard Biener  <rguenther@suse.de>

	Revert
	2019-09-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91790
	* tree-vect-stmts.c (vectorizable_load): For BB vectorization
	use the correct DR for setting up realignment.

2019-11-21  Richard Biener  <rguenther@suse.de>

	* tree-ssa-structalias.c (equiv_class_hasher): Change to nofree.
	(equiv_class_obstack): New.
	(equiv_class_lookup_or_add): Allocate from equiv_class_obstack.
	(perform_var_substitution): Initialize equiv_class_obstack.
	(free_var_substitution_info): Free equiv_class_obstack.

2019-11-20  Jan Hubicka  <jh@suse.cz>

	* ipa-inline.c (want_early_inline_function_p): Do not estimate
	edge growth when callee function is very large.
	* ipa-inline.h (estimate_min_edge_growth): New.

2019-11-20  Jan Hubicka  <jh@suse.cz>

	* ipa-fnsummary.c (ipa_fn_summary::account_size_time): Allow
	negative time in calls summary; correct roundoff errors
	leading to negative times.
	(ipa_merge_fn_summary_after_inlining): Update calls size time table
	if present.
	(ipa_update_overall_fn_summary): Add RESET parameter.
	* ipa-fnsummary.h (ipa_update_overall_fn_summary): Update prototype.
	* ipa-inline-transform.c (inline_call): Enable incremental updates.

2019-11-20  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-slp.c (vect_schedule_slp_instance): Restore stmt
	def types for two-operation SLP.

2019-11-20  Richard Sandiford  <richard.sandiford@arm.com>

	PR testsuite/92366
	* doc/sourcebuild.texi (vect_char_add): Document.

2019-11-20  Alexandre Oliva <oliva@adacore.com>

	* function.h (CALLEE_FROM_CGRAPH_P): Remove.
	* function.c (record_final_call): Record even calls that might
	have been in the cgraph.
	* toplev.c (dump_final_node_vcg): Skip iteration over cgraph
	callees.

2019-11-20  Janne Blomqvist  <jb@gcc.gnu.org>

	* configure.ac: Use https for gcc.gnu.org
	* configure: Regenerated.
	* doc/install.texi: Use https for gcc.gnu.org.
	* doc/sourcebuild.texi: Likewise.

2019-11-20  Julian Brown  <julian@codesourcery.com>

	* config/gcn/gcn.c (gcn_asm_output_symbol_ref): Handle null cfun.

2019-11-20  Jan Hubicka  <jh@suse.cz>

	* ipa-fnsummary.c (ipa_fn_summary::account_size_time): Add CALL
	parameter and update call_size_time_table.
	(ipa_fn_summary::max_size_time_table_size): New constant.
	(estimate_calls_size_and_time_1): Break out from ...
	(estimate_calls_size_and_time): ... here; implement summary production.
	(summarize_calls_size_and_time): New function.
	(ipa_call_context::estimate_size_and_time): Bypass
	estimate_calls_size_and_time for leaf functions.
	(ipa_update_overall_fn_summary): Likewise.
	* ipa-fnsummary.h (call_size_time_table): New.
	(ipa_fn_summary::account_size_time): Update prototype.

2019-11-20  Joseph Myers  <joseph@codesourcery.com>

	* doc/invoke.texi (-Wc11-c2x-compat): Document.

2019-11-20  Wilco Dijkstra  <wdijkstr@arm.com>

	PR85678
	* common.opt (fcommon): Change init to 1.
	* doc/invoke.texi (-fcommon): Update documentation.

2019-11-20  Jan Hubicka  <jh@suse.cz>

	* fibonacci_heap.h (fibonacci_heap<K,V>::consolidate): Turn auto_vec
	to ordinary array.

2019-11-20  Jan Hubicka  <jh@suse.cz>

	* fibonacci_heap.h (fibonacci_heap<K,V>::fibonacci_heap):
	Add allocator parameter.
	(fibonacci_heap<K,V>::~fibonacci_heap): Optimize destruction.
	(fibonacci_heap<K,V>::m_allocator): New.
	(fibonacci_heap<K,V>::m_own_allocator): New.
	(fibonacci_heap<K,V>::insert): Use allocator.
	(fibonacci_heap<K,V>::extract_min): Likewise.
	(fibonacci_heap<K,V>::union_with): Assert that both heaps share
	allocator.
	(fibonacci_heap<K,V>::consolidate): Allocate constant sized vector
	on stack.
	* fibonacci_heap.c: Include alloc-pool
	(test_empty_heap): Initialize allocator.
	(test_union): Likewise.
	* bb-reorder.c: Include alloc-pool.h.
	* tracer.c: Inlclude alloc-pool.h.

2019-11-20  Jan Hubicka  <jh@suse.cz>

	* lto-streamer-out.c (DFS::sccstack): Turn into auto-vec.
	Preallocate for 32 entries.
	(DFS::worklist): Likewise.
	(DFS::DFS): Do not initialize sccstack and worklist.
	(DFS::~DFS): Do not release sccstack.

2019-11-20  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/92573
	* config/rs6000/dfp.md (dfptstsfi_<code>_<mode> for DFP_TEST and DDTD):
	Handle UNORDERED if !HONOR_NANS.

2019-11-20  Jan Hubicka  <jh@suse.cz>

	* ipa-inline.c (wrapper_heuristics_may_apply): Break out from ...
	(edge_badness): ... here.
	(inline_small_functions): Use monotonicity of badness calculation
	to avoid redundant updates.

2019-11-20  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_analyze_slp_instance): Dump
	constructors we are actually analyzing.
	(vect_slp_check_for_constructors): Do not vectorize uniform
	constuctors, do not dump here.

2019-11-20  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92537
	* tree-vect-slp.c (vect_analyze_slp_instance): Move CTOR
	vectorization validity check...
	(vect_slp_analyze_operations): ... here.

2019-11-20  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (make_pass_arc_ifcvt): Declare.
	(make_pass_arc_predicate_delay_insns): Likewise.
	* config/arc/arc.c (class pass_arc_ifcvt): Reformat text, add gate
	method, remove clone.
	(class pass_arc_predicate_delay_insns): Likewise.
	(arc_init): Remove registering of ARC specific passes.
	* config/arc/t-arc (PASSES_EXTRA): Add arc-passes.def.
	* config/arc/arc-passes.def: New file.

2019-11-20  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/90840
	* expmed.c (store_bit_field_1): Handle the case where op0 is not a MEM
	and has a mode that doesn't have corresponding integral type.

	PR target/90867
	* config/i386/i386-options.c (ix86_valid_target_attribute_tree): Don't
	clear opts->x_ix86_isa_flags{,2} here...
	(ix86_valid_target_attribute_inner_p): ... but here when seeing
	arch=.  Also clear opts->x_ix86_isa_flags{,2}_explicit.

	PR c/90898
	* tree-ssa-ccp.c (insert_clobber_before_stack_restore): Remove
	assertion.
	(insert_clobbers_for_var): Fix a typo in function comment.

2019-11-20  Jiangning Liu  <jiangning.liu@amperecomputing.com>
	    Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/91195
	* tree-ssa-phiopt.c (cond_store_replacement): Move lhs unsharing
	earlier.  Set TREE_NO_WARNING on the rhs1 of the artificially added
	load.

2019-11-20  Georg-Johann Lay  <avr@gjlay.de>

	Make 0-series device specs work with older versions of avr-gcc.

	PR target/92545
	* config/avr/specs.h (LINK_SPEC) <%(link_pm_base_address)>: Remove.
	* config/avr/gen-avr-mmcu-specs.c (print_mcu)
	<*link_pm_base_address>: Don't write spec.
	<*link_arch>: Add --defsym=__RODATA_PM_OFFSET__= as needed.

2019-11-20  Richard Biener  <rguenther@suse.de>

	PR c/92088
	* builtins.c (compute_objsize): Deal with VLAs.

2019-11-19  Pat Haugen  <pthaugen@us.ibm.com>

	* config/rs6000/rs6000.c (move_to_end_of_ready): New, factored out
	from common code.
	(power6_sched_reorder2): Factored out from rs6000_sched_reorder2,
	call new function.
	(power9_sched_reorder2): Call new function.
	(rs6000_sched_reorder2): Likewise.

2019-11-18  Jan Hubicka  <jh@suse.cz>

	* ipa-fnsummary.c (estimate_edge_size_and_time): Drop parameter PROB.
	(estimate_calls_size_and_time): Update.

2019-11-18  Jan Hubicka  <jh@suse.cz>

	* ipa-inline.c (inlining_speedup): New function.
	(edge_badness): Use it.

2019-11-19  Zoran Jovanovic <zoran.jovanovic@mips.com>
			Dragan Mladjenovic  <dmladjenovic@wavecomp.com>

	* config/mips/mips-msa.md (msa_<msabr>_<msafmt_f>, msa_<msabr>_v_<msafmt_f>):
	Mark as not having "likely" version.
	* config/mips/mips.md (insn_count): The simd_div instruction with
	TARGET_CHECK_ZERO_DIV consists of 3 instructions.
	(can_delay): Exclude simd_branch.
	(defile_delay *): Add simd_branch instructions.
	They have one regular delay slot.

2019-11-19  Richard Sandiford  <richard.sandiford@arm.com>

	Revert:
	2019-11-18  Richard Sandiford  <richard.sandiford@arm.com>

	* cse.c (cse_insn): Delete no-op register moves too.
	* simplify-rtx.c (comparison_to_mask): Handle unsigned comparisons.
	Take a second comparison to control the value for NE.
	(mask_to_comparison): Handle unsigned comparisons.
	(simplify_logical_relational_operation): Likewise.  Update call
	to comparison_to_mask.  Handle AND if !HONOR_NANs.
	(simplify_binary_operation_1): Call the above for AND too.

2019-11-19  Martin Liska  <mliska@suse.cz>

	* toplev.c (general_init): Move the call...
	(toplev::main): ... here as we need init_options_struct
	being called.

2019-11-19  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/79262
	* config/aarch64/aarch64.c (generic_vector_cost): Adjust
	vec_to_scalar_cost.

2019-11-19  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/arm-cpus.in (armv7): Set tune to Cortex-A53.
	(armv7-a): Likewise.
	(armv7ve): Likewise.

2019-11-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92581
	* tree-vect-loop.c (vect_create_epilog_for_reduction): For
	condition reduction chains gather all conditions involved
	for computing the index reduction vector.

2019-11-19  Dennis Zhang  <dennis.zhang@arm.com>

	* config/aarch64/aarch64-builtins.c (enum aarch64_builtins): Add
	AARCH64_MEMTAG_BUILTIN_START, AARCH64_MEMTAG_BUILTIN_IRG,
	AARCH64_MEMTAG_BUILTIN_GMI, AARCH64_MEMTAG_BUILTIN_SUBP,
	AARCH64_MEMTAG_BUILTIN_INC_TAG, AARCH64_MEMTAG_BUILTIN_SET_TAG,
	AARCH64_MEMTAG_BUILTIN_GET_TAG, and AARCH64_MEMTAG_BUILTIN_END.
	(aarch64_init_memtag_builtins): New.
	(AARCH64_INIT_MEMTAG_BUILTINS_DECL): New macro.
	(aarch64_general_init_builtins): Call aarch64_init_memtag_builtins.
	(aarch64_expand_builtin_memtag): New.
	(aarch64_general_expand_builtin): Call aarch64_expand_builtin_memtag.
	(AARCH64_BUILTIN_SUBCODE): New macro.
	(aarch64_resolve_overloaded_memtag): New.
	(aarch64_resolve_overloaded_builtin_general): New. Call
	aarch64_resolve_overloaded_memtag to handle overloaded MTE builtins.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Define
	__ARM_FEATURE_MEMORY_TAGGING when enabled.
	(aarch64_resolve_overloaded_builtin): Call
	aarch64_resolve_overloaded_builtin_general.
	* config/aarch64/aarch64-protos.h
	(aarch64_resolve_overloaded_builtin_general): New declaration.
	* config/aarch64/aarch64.h (AARCH64_ISA_MEMTAG): New macro.
	(TARGET_MEMTAG): Likewise.
	* config/aarch64/aarch64.md (UNSPEC_GEN_TAG): New unspec.
	(UNSPEC_GEN_TAG_RND, and UNSPEC_TAG_SPACE): Likewise.
	(irg, gmi, subp, addg, ldg, stg): New instructions.
	* config/aarch64/arm_acle.h (__arm_mte_create_random_tag): New macro.
	(__arm_mte_exclude_tag, __arm_mte_ptrdiff): Likewise.
	(__arm_mte_increment_tag, __arm_mte_set_tag): Likewise.
	(__arm_mte_get_tag): Likewise.
	* config/aarch64/predicates.md (aarch64_memtag_tag_offset): New.
	(aarch64_granule16_uimm6, aarch64_granule16_simm9): New.
	* config/arm/types.md (memtag): New.
	* doc/invoke.texi (-memtag): Update description.

2019-11-19  Richard Henderson  <richard.henderson@linaro.org>

	* config/arm/arm-c.c (arm_cpu_builtins): Use def_or_undef_macro
	to define __GCC_ASM_FLAG_OUTPUTS__.
	* config/arm/arm.c (thumb1_md_asm_adjust): New function.
	(arm_option_params_internal): Swap out targetm.md_asm_adjust
	depending on TARGET_THUMB1.
	* doc/extend.texi (FlagOutputOperands): Document thumb1 restriction.

2019-11-19  Jakub Jelinek  <jakub@redhat.com>

	PR target/92549
	* config/i386/i386.md (peephole2 for *swap<mode>): New peephole2.

	PR middle-end/91450
	* internal-fn.c (expand_mul_overflow): For s1 * s2 -> ur, if one
	operand is negative and one non-negative, compare the non-negative
	one against 0 rather than comparing s1 & s2 against 0.  Otherwise,
	don't compare (s1 & s2) == 0, but compare separately both s1 == 0
	and s2 == 0, unless one of them is known to be negative.  Remove
	tem2 variable, use tem where tem2 has been used before.

2019-11-19  Eric Botcazou  <ebotcazou@adacore.com>

	* doc/invoke.texi (-gno-internal-reset-location-views): Fix typo.

2019-11-19  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/92557
	* omp-low.c (omp_clause_aligned_alignment): Punt if TYPE_MODE is not
	vmode rather than asserting it always is.

2019-11-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92554
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Look
	for the actual condition stmt and deal with sign-changes.

2019-11-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92555
	* tree-vect-loop.c (vect_update_vf_for_slp): Also scan PHIs
	for non-SLP stmts.

2019-11-19  Martin Liska  <mliska@suse.cz>

	PR bootstrap/92540
	* config/riscv/riscv.c (riscv_address_insns): Initialize
	addr in order to remove boostrap -Wmaybe-uninitialized
	error.

2019-11-18  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/92493
	* gimple-ssa-sprintf.c (get_origin_and_offset): Remove spurious
	assignment.

2019-11-18  Giuliano Belinassi  <giuliano.belinassi@usp.br>

	* cfgloop.c (get_loop_body_in_custom_order): New.
	* cfgloop.h (get_loop_body_in_custom_order): New prototype.
	* tree-loop-distribution.c (class loop_distribution): New.
	(bb_top_order_cmp): Remove.
	(bb_top_order_cmp_r): New.
	(create_rdg_vertices): Move into class loop_distribution.
	(stmts_from_loop): Same as above.
	(update_for_merge): Same as above.
	(partition_merge_into): Same as above.
	(get_data_dependence): Same as above.
	(data_dep_in_cycle_p): Same as above.
	(update_type_for_merge): Same as above.
	(build_rdg_partition_for-vertex): Same as above.
	(classify_builtin_ldst): Same as above.
	(classify_partition): Same as above.
	(share_memory_accesses): Same as above.
	(rdg_build_partitions): Same as above.
	(pg_add_dependence_edges): Same as above.
	(build_partition_graph): Same as above.
	(merge_dep_scc_partitions): Same as above.
	(break_alias_scc_partitions): Same as above.
	(finalize_partitions): Same as above.
	(distribute_loop): Same as above.
	(bb_top_order_init): New method
	(bb_top_order_destroy): New method.
	(get_bb_top_order_index_size): New method.
	(get_bb_top_order_index_index): New method.
	(get_bb_top_order_index_index): New method.
	(loop_distribution::execute): New method.
	(pass_loop_distribution::execute): Instantiate loop_distribution.

2019-11-18  Jan Hubicka  <jh@suse.cz>

	PR ipa/92508
	* ipa-inline.c (inline_small_functions): Add new edges after reseting
	caches.
	* ipa-inline-analysis.c (do_estimate_edge_time): Fix sanity check.

2019-11-18  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/sourcebuild.texi (vect_check_ptrs): Document.
	* optabs.def (check_raw_ptrs_optab, check_war_ptrs_optab): New optabs.
	* doc/md.texi: Document them.
	* internal-fn.def (IFN_CHECK_RAW_PTRS, IFN_CHECK_WAR_PTRS): New
	internal functions.
	* internal-fn.h (internal_check_ptrs_fn_supported_p): Declare.
	* internal-fn.c (check_ptrs_direct): New macro.
	(expand_check_ptrs_optab_fn): Likewise.
	(direct_check_ptrs_optab_supported_p): Likewise.
	(internal_check_ptrs_fn_supported_p): New fuction.
	* tree-data-ref.c: Include internal-fn.h.
	(create_ifn_alias_checks): New function.
	(create_intersect_range_checks): Use it.
	* config/aarch64/iterators.md (SVE2_WHILE_PTR): New int iterator.
	(optab, cmp_op): Handle it.
	(raw_war, unspec): New int attributes.
	* config/aarch64/aarch64.md (UNSPEC_WHILERW, UNSPEC_WHILE_WR): New
	constants.
	* config/aarch64/predicates.md (aarch64_bytes_per_sve_vector_operand):
	New predicate.
	* config/aarch64/aarch64-sve2.md (check_<raw_war>_ptrs<mode>): New
	expander.
	(@aarch64_sve2_while<cmp_op><GPI:mode><PRED_ALL:mode>_ptest): New
	pattern.

2019-11-18  Richard Sandiford  <richard.sandiford@arm.com>

	* tree.c (build_vector_from_ctor): Directly return a zero vector for
	empty constructors.

2019-11-18  Richard Sandiford  <richard.sandiford@arm.com>

	* cse.c (cse_insn): Delete no-op register moves too.
	* simplify-rtx.c (comparison_to_mask): Handle unsigned comparisons.
	Take a second comparison to control the value for NE.
	(mask_to_comparison): Handle unsigned comparisons.
	(simplify_logical_relational_operation): Likewise.  Update call
	to comparison_to_mask.  Handle AND if !HONOR_NANs.
	(simplify_binary_operation_1): Call the above for AND too.

2019-11-18  Richard Sandiford  <richard.sandiford@arm.com>

	* fold-const.c (native_encode_vector): Turn into a wrapper function,
	splitting the main code out into...
	(native_encode_vector_part): ...this new function.
	(native_decode_vector_tree): New function.
	(fold_view_convert_vector_encoding): Likewise.
	(fold_view_convert_expr): Use it for converting VECTOR_CSTs
	to VECTOR_TYPEs.

2019-11-18  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-data-ref.c (create_intersect_range_checks_index): If the
	alias pair describes simple WAW and WAR dependencies, just check
	whether the first B access overlaps later A accesses.
	(create_waw_or_war_checks): New function that performs the same
	optimization on addresses.
	(create_intersect_range_checks): Call it.

2019-11-18  Richard Sandiford  <richard.sandiford@arm.com>

	* lra-constraints.c (valid_address_p): Take the operand and a
	constraint as argument.  If the operand is a MEM and the constraint
	is a memory constraint, check whether the eliminated form of the
	MEM already satisfies the constraint.
	(process_address_1): Update calls accordingly.

2019-11-18  Tom Tromey  <tromey@adacore.com>

	* doc/tm.texi: Rebuild.
	* doc/tm.texi.in (Misc): Don't document MODIFY_JNI_METHOD_CALL.
	* config/i386/cygming.h (MODIFY_JNI_METHOD_CALL): Don't define.

2019-11-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92516
	* tree-vect-slp.c (vect_analyze_slp_instance): Add bst_map
	argument, hoist bst_map creation/destruction to ...
	(vect_analyze_slp): ... here, forming a true graph with
	SLP instances being the entries.
	(vect_detect_hybrid_slp_stmts): Remove wrapper.
	(vect_detect_hybrid_slp): Use one visited set for all
	graph entries.
	(vect_slp_analyze_node_operations): Simplify visited/lvisited
	to hash-sets of slp_tree.
	(vect_slp_analyze_operations): Likewise.
	(vect_bb_slp_scalar_cost): Remove wrapper.
	(vect_bb_vectorization_profitable_p): Use one visited set for
	all graph entries.
	(vect_schedule_slp_instance): Elide bst_map use.
	(vect_schedule_slp): Likewise.

2019-11-18  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_analyze_slp_instance): When a CTOR
	was vectorized with just external refs fail.

2019-11-18  Martin Liska  <mliska@suse.cz>

	PR ipa/92525
	* ipa-icf.c (sem_function::init): Unset m_checker
	at the end of the function.

2019-11-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92558
	* tree-vect-loop.c (vect_create_epilog_for_reduction): When
	reducting the width of a reduction vector def update new_phis.

2019-11-18  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* configure.ac (gcc_cv_target_ldbl128): Set for powerpc*-*-linux-musl*
	and s390*-*-linux-musl* targets.
	* configure: Regenerate.

2019-11-18  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* config/s390/linux.h (MUSL_DYNAMIC_LINKER32): Define.
	(MUSL_DYNAMIC_LINKER64): Define.

2019-11-18  Martin Liska  <mliska@suse.cz>

	* dbgcnt.c (dbg_cnt_set_limit_by_name): Provide error
	message for an unknown counter.
	(dbg_cnt_process_single_pair): Support 0 as minimum value.
	(dbg_cnt_process_opt): Remove unreachable code.

2019-11-18  Martin Liska  <mliska@suse.cz>

	PR ipa/92529
	* ipa-icf-gimple.c (func_checker::compare_gimple_assign):
	Compare LHS types of NOP_EXPR.

2019-11-18  Matthew Malcomson  <matthew.malcomson@arm.com>

	* run-rtl-passes.c (run_rtl_passes): Accept and handle empty
	"initial_pass_name" argument -- by running "*clean_state" pass.
	Also free the "initial_pass_name" when done.

2019-11-18  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/92462
	* alias.c (find_base_term): Restrict the look through ANDs.
	(find_base_value): Likewise.

2019-11-18  Georg-Johann Lay  <avr@gjlay.de>

	Add support for AVR devices from the 0-series.

	PR target/92545
	* config/avr/avr-arch.h (avr_mcu_t) <flash_pm_offset>: New field.
	* config/avr/avr-devices.c (avr_mcu_types): Adjust initializers.
	* config/avr/avr-mcus.def (AVR_MCU): Add respective field.
	* config/avr/specs.h (LINK_SPEC) <%(link_pm_base_address)>: Add.
	* config/avr/gen-avr-mmcu-specs.c (print_mcu)
	<*cpp, *cpp_mcu, *cpp_avrlibc, *link_pm_base_address>: Emit code
	for spec definitions.
	* doc/avr-mmcu.texi: Regenerate.

2019-11-18  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/92448
	* config/i386/i386-expand.c (ix86_expand_set_or_cpymem):
	Replace TARGET_AVX128_OPTIMAL with TARGET_AVX256_SPLIT_REGS.
	* config/i386/i386-option.c (ix86_vec_cost): Ditto.
	(ix86_reassociation_width): Ditto.
	* config/i386/i386-options.c (ix86_option_override_internal):
	Replace TARGET_AVX128_OPTIAML with
	ix86_tune_features[X86_TUNE_AVX128_OPTIMAL]
	* config/i386/i386.h (TARGET_AVX256_SPLIT_REGS): New macro.
	(TARGET_AVX128_OPTIMAL): Deleted.
	* config/i386/x86-tune.def (X86_TUNE_AVX256_SPLIT_REGS): New
	DEF_TUNE.

2019-11-16  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (cceq_ior_compare): Rename to...
	(@cceq_ior_compare_<mode> for GPR): ... this.  Allow GPR instead of
	just SI.
	(cceq_rev_compare): Rename to...
	(@cceq_rev_compare_<mode> for GPR): ... this.  Allow GPR instead of
	just SI.
	(define_split for <bd>tf_<mode>): Add SImode first argument to
	gen_cceq_ior_compare.

2019-11-16  Segher Boessenkool  <segher@kernel.crashing.org>

	* common/config/powerpcspe: Delete.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (aarch64_wrffr): Wrap the FFRT
	output in UNSPEC_WRFFR.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-data-ref.c (create_intersect_range_checks_index): Rewrite
	the index tests to have the form (unsigned T) (B - A + bias) <= limit.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-data-ref.c (create_intersect_range_checks_index)
	(create_intersect_range_checks): Print dump messages.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-data-ref.c (dump_alias_pair): New function.
	(prune_runtime_alias_test_list): Use it to dump each merged alias pair.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-data-ref.h (DR_ALIAS_MIXED_STEPS): New flag.
	* tree-data-ref.c (prune_runtime_alias_test_list): Set it when
	merging data references with different steps.
	(create_intersect_range_checks_index): Take a
	dr_with_seg_len_pair_t instead of two dr_with_seg_lens.
	Bail out if DR_ALIAS_MIXED_STEPS is set.
	(create_intersect_range_checks): Take a dr_with_seg_len_pair_t
	instead of two dr_with_seg_lens.  Update call to
	create_intersect_range_checks_index.
	(create_runtime_alias_checks): Update call accordingly.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-data-ref.h (DR_ALIAS_RAW, DR_ALIAS_WAR, DR_ALIAS_WAW)
	(DR_ALIAS_ARBITRARY, DR_ALIAS_SWAPPED, DR_ALIAS_UNSWAPPED): New flags.
	(dr_with_seg_len_pair_t::sequencing): New enum.
	(dr_with_seg_len_pair_t::flags): New member variable.
	(dr_with_seg_len_pair_t::dr_with_seg_len_pair_t): Take a sequencing
	parameter and initialize the flags member variable.
	* tree-loop-distribution.c (compute_alias_check_pairs): Update
	call accordingly.
	* tree-vect-data-refs.c (vect_prune_runtime_alias_test_list): Likewise.
	Ensure the two data references in an alias pair are in statement
	order, if there is a defined order.
	* tree-data-ref.c (prune_runtime_alias_test_list): Use
	DR_ALIAS_SWAPPED and DR_ALIAS_UNSWAPPED to record whether we've
	swapped the references in a dr_with_seg_len_pair_t.  OR together
	the flags when merging two dr_with_seg_len_pair_ts.  After merging,
	try to restore the original dr_with_seg_len order, updating the
	flags if that fails.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-data-ref.c (prune_runtime_alias_test_list): Delay
	swapping the dr_as based on init values until we've decided
	whether to merge them.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-data-ref.c (prune_runtime_alias_test_list): Sort the
	two accesses in each dr_with_seg_len_pair_t before trying to
	combine separate dr_with_seg_len_pair_ts.
	* tree-loop-distribution.c (compute_alias_check_pairs): Don't do
	that here.
	* tree-vect-data-refs.c (vect_prune_runtime_alias_test_list): Likewise.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md
	(scatter_store<SVE_FULL_SD:mode><v_int_equiv>): Extend to...
	(scatter_store<SVE_24:mode><v_int_container>): ...this.
	(mask_scatter_store<SVE_FULL_S:mode><v_int_equiv>): Extend to...
	(mask_scatter_store<SVE_4:mode><v_int_equiv>): ...this.
	(mask_scatter_store<SVE_FULL_D:mode><v_int_equiv>): Extend to...
	(mask_scatter_store<SVE_2:mode><v_int_equiv>): ...this.
	(*mask_scatter_store<mode><v_int_container>_<su>xtw_unpacked): New
	pattern.
	(*mask_scatter_store<SVE_FULL_D:mode><v_int_equiv>_sxtw): Extend to...
	(*mask_scatter_store<SVE_2:mode><v_int_equiv>_sxtw): ...this.
	(*mask_scatter_store<SVE_FULL_D:mode><v_int_equiv>_uxtw): Extend to...
	(*mask_scatter_store<SVE_2:mode><v_int_equiv>_uxtw): ...this.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SVE_2BHSI, SVE_2HSDI, SVE_4BHI)
	(SVE_4HSI): New mode iterators.
	(ANY_EXTEND2): New code iterator.
	* config/aarch64/aarch64-sve.md
	(@aarch64_gather_load_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>):
	Extend to...
	(@aarch64_gather_load_<ANY_EXTEND:optab><SVE_4HSI:mode><SVE_4BHI:mode>):
	...this, handling extension to partial modes as well as full modes.
	Describe the extension as a predicated rather than unpredicated
	extension.
	(@aarch64_gather_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>):
	Likewise extend to...
	(@aarch64_gather_load_<ANY_EXTEND:optab><SVE_2HSDI:mode><SVE_2BHSI:mode>):
	...this, making the same adjustments.
	(*aarch64_gather_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_sxtw):
	Likewise extend to...
	(*aarch64_gather_load_<ANY_EXTEND:optab><SVE_2HSDI:mode><SVE_2BHSI:mode>_sxtw)
	...this, making the same adjustments.
	(*aarch64_gather_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_uxtw):
	Likewise extend to...
	(*aarch64_gather_load_<ANY_EXTEND:optab><SVE_2HSDI:mode><SVE_2BHSI:mode>_uxtw)
	...this, making the same adjustments.
	(*aarch64_gather_load_<ANY_EXTEND:optab><SVE_2HSDI:mode><SVE_2BHSI:mode>_<ANY_EXTEND2:su>xtw_unpacked):
	New pattern.
	(*aarch64_ldff1_gather<mode>_sxtw): Canonicalize to a constant
	extension predicate.
	(@aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>)
	(@aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>)
	(*aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_uxtw):
	Describe the extension as a predicated rather than unpredicated
	extension.
	(*aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_sxtw):
	Likewise.  Canonicalize to a constant extension predicate.
	* config/aarch64/aarch64-sve-builtins-base.cc
	(svld1_gather_extend_impl::expand): Add an extra predicate for
	the extension.
	(svldff1_gather_extend_impl::expand): Likewise.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SVE_24, SVE_2, SVE_4): New mode
	iterators.
	* config/aarch64/aarch64-sve.md
	(gather_load<SVE_FULL_SD:mode><v_int_equiv>): Extend to...
	(gather_load<SVE_24:mode><v_int_container>): ...this.
	(mask_gather_load<SVE_FULL_S:mode><v_int_equiv>): Extend to...
	(mask_gather_load<SVE_4:mode><v_int_container>): ...this.
	(mask_gather_load<SVE_FULL_D:mode><v_int_equiv>): Extend to...
	(mask_gather_load<SVE_2:mode><v_int_container>): ...this.
	(*mask_gather_load<SVE_2:mode><v_int_container>_<su>xtw_unpacked):
	New pattern.
	(*mask_gather_load<SVE_FULL_D:mode><v_int_equiv>_sxtw): Extend to...
	(*mask_gather_load<SVE_2:mode><v_int_equiv>_sxtw): ...this.
	Allow the nominal extension predicate to be different from the
	load predicate.
	(*mask_gather_load<SVE_FULL_D:mode><v_int_equiv>_uxtw): Extend to...
	(*mask_gather_load<SVE_2:mode><v_int_equiv>_uxtw): ...this.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md
	(trunc<SVE_HSDI:mode><SVE_PARTIAL_I:mode>2): New pattern.
	* config/aarch64/aarch64.c (aarch64_integer_truncation_p): New
	function.
	(aarch64_sve_adjust_stmt_cost): Call it.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md
	(@aarch64_load_<ANY_EXTEND:optab><VNx8_WIDE:mode><VNx8_NARROW:mode>):
	(@aarch64_load_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>)
	(@aarch64_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>):
	Combine into...
	(@aarch64_load_<ANY_EXTEND:optab><SVE_HSDI:mode><SVE_PARTIAL_I:mode>):
	...this new pattern, handling extension to partial modes as well
	as full modes.  Describe the extension as a predicated rather than
	unpredicated extension.
	(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><VNx8_WIDE:mode><VNx8_NARROW:mode>)
	(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>)
	(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>):
	Combine into...
	(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><SVE_HSDI:mode><SVE_PARTIAL_I:mode>):
	...this new pattern, handling extension to partial modes as well
	as full modes.  Describe the extension as a predicated rather than
	unpredicated extension.
	* config/aarch64/aarch64-sve-builtins.cc
	(function_expander::use_contiguous_load_insn): Add an extra
	predicate for extending loads.
	* config/aarch64/aarch64.c (aarch64_extending_load_p): New function.
	(aarch64_sve_adjust_stmt_cost): Likewise.
	(aarch64_add_stmt_cost): Use aarch64_sve_adjust_stmt_cost to adjust
	the cost of SVE vector stmts.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SVE_HSDI): New mode iterator.
	(narrower_mask): Handle VNx4HI, VNx2HI and VNx2SI.
	* config/aarch64/aarch64-sve.md
	(<ANY_EXTEND:optab><SVE_PARTIAL_I:mode><SVE_HSDI:mode>2): New pattern.
	(*<ANY_EXTEND:optab><SVE_PARTIAL_I:mode><SVE_HSDI:mode>2): Likewise.
	(@aarch64_pred_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Update
	comment.  Avoid new narrower_mask ambiguity.
	(@aarch64_cond_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Likewise.
	(*cond_uxt<mode>_2): Update comment.
	(*cond_uxt<mode>_any): Likewise.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-modes.def: Define partial SVE vector
	float modes.
	* config/aarch64/aarch64-protos.h (aarch64_sve_pred_mode): New
	function.
	* config/aarch64/aarch64.c (aarch64_classify_vector_mode): Handle the
	new vector float modes.
	(aarch64_sve_container_bits): New function.
	(aarch64_sve_pred_mode): Likewise.
	(aarch64_get_mask_mode): Use it.
	(aarch64_sve_element_int_mode): Handle structure modes and partial
	modes.
	(aarch64_sve_container_int_mode): New function.
	(aarch64_vectorize_related_mode): Return SVE modes when given
	SVE modes.  Handle partial modes, taking the preferred number
	of units from the size of the given mode.
	(aarch64_hard_regno_mode_ok): Allow partial modes to be stored
	in registers.
	(aarch64_expand_sve_ld1rq): Use the mode form of aarch64_sve_pred_mode.
	(aarch64_expand_sve_const_vector): Handle partial SVE vectors.
	(aarch64_split_sve_subreg_move): Use the mode form of
	aarch64_sve_pred_mode.
	(aarch64_secondary_reload): Handle partial modes in the same way
	as full big-endian vectors.
	(aarch64_vector_mode_supported_p): Allow partial SVE vectors.
	(aarch64_autovectorize_vector_modes): Try unpacked SVE vectors,
	merging with the Advanced SIMD modes.  If two modes have the
	same size, try the Advanced SIMD mode first.
	(aarch64_simd_valid_immediate): Use the container rather than
	the element mode for INDEX constants.
	(aarch64_simd_vector_alignment): Make the alignment of partial
	SVE vector modes the same as their minimum size.
	(aarch64_evpc_sel): Use the mode form of aarch64_sve_pred_mode.
	* config/aarch64/aarch64-sve.md (mov<SVE_FULL:mode>): Extend to...
	(mov<SVE_ALL:mode>): ...this.
	(movmisalign<SVE_FULL:mode>): Extend to...
	(movmisalign<SVE_ALL:mode>): ...this.
	(*aarch64_sve_mov<mode>_le): Rename to...
	(*aarch64_sve_mov<mode>_ldr_str): ...this.
	(*aarch64_sve_mov<SVE_FULL:mode>_be): Rename and extend to...
	(*aarch64_sve_mov<SVE_ALL:mode>_no_ldr_str): ...this.  Handle
	partial modes regardless of endianness.
	(aarch64_sve_reload_be): Rename to...
	(aarch64_sve_reload_mem): ...this and enable for little-endian.
	Use aarch64_sve_pred_mode to get the appropriate predicate mode.
	(@aarch64_pred_mov<SVE_FULL:mode>): Extend to...
	(@aarch64_pred_mov<SVE_ALL:mode>): ...this.
	(*aarch64_sve_mov<SVE_FULL:mode>_subreg_be): Extend to...
	(*aarch64_sve_mov<SVE_ALL:mode>_subreg_be): ...this.
	(@aarch64_sve_reinterpret<SVE_FULL:mode>): Extend to...
	(@aarch64_sve_reinterpret<SVE_ALL:mode>): ...this.
	(*aarch64_sve_reinterpret<SVE_FULL:mode>): Extend to...
	(*aarch64_sve_reinterpret<SVE_ALL:mode>): ...this.
	(maskload<SVE_FULL:mode><vpred>): Extend to...
	(maskload<SVE_ALL:mode><vpred>): ...this.
	(maskstore<SVE_FULL:mode><vpred>): Extend to...
	(maskstore<SVE_ALL:mode><vpred>): ...this.
	(vec_duplicate<SVE_FULL:mode>): Extend to...
	(vec_duplicate<SVE_ALL:mode>): ...this.
	(*vec_duplicate<SVE_FULL:mode>_reg): Extend to...
	(*vec_duplicate<SVE_ALL:mode>_reg): ...this.
	(sve_ld1r<SVE_FULL:mode>): Extend to...
	(sve_ld1r<SVE_ALL:mode>): ...this.
	(vec_series<SVE_FULL_I:mode>): Extend to...
	(vec_series<SVE_I:mode>): ...this.
	(*vec_series<SVE_FULL_I:mode>_plus): Extend to...
	(*vec_series<SVE_I:mode>_plus): ...this.
	(@aarch64_pred_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Avoid
	new VPRED ambiguity.
	(@aarch64_cond_sxt<SVE_FULL_HSDI:mode><SVE_PARTIAL_I:mode>): Likewise.
	(add<SVE_FULL_I:mode>3): Extend to...
	(add<SVE_I:mode>3): ...this.
	* config/aarch64/iterators.md (SVE_ALL, SVE_I): New mode iterators.
	(Vetype, Vesize, VEL, Vel, vwcore): Handle partial SVE vector modes.
	(VPRED, vpred): Likewise.
	(Vctype): New iterator.
	(vw): Remove SVE modes.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SVE_PARTIAL): Rename to...
	(SVE_PARTIAL_I): ...this.
	* config/aarch64/aarch64-sve.md: Apply the above renaming throughout.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SVE_ALL): Rename to...
	(SVE_FULL): ...this.
	(SVE_I): Rename to...
	(SVE_FULL_I): ...this.
	(SVE_F): Rename to...
	(SVE_FULL_F): ...this.
	(SVE_BHSI): Rename to...
	(SVE_FULL_BHSI): ...this.
	(SVE_HSD): Rename to...
	(SVE_FULL_HSD): ...this.
	(SVE_HSDI): Rename to...
	(SVE_FULL_HSDI): ...this.
	(SVE_HSF): Rename to...
	(SVE_FULL_HSF): ...this.
	(SVE_SD): Rename to...
	(SVE_FULL_SD): ...this.
	(SVE_SDI): Rename to...
	(SVE_FULL_SDI): ...this.
	(SVE_SDF): Rename to...
	(SVE_FULL_SDF): ...this.
	(SVE_S): Rename to...
	(SVE_FULL_S): ...this.
	(SVE_D): Rename to...
	(SVE_FULL_D): ...this.
	* config/aarch64/aarch64-sve.md: Apply the above renaming throughout.
	* config/aarch64/aarch64-sve2.md: Likewise.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.opt (--param=aarch64-sve-compare-costs):
	New option.
	* doc/invoke.texi: Document it.
	* config/aarch64/aarch64.c (aarch64_autovectorize_vector_modes):
	By default, return VECT_COMPARE_COSTS for SVE.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* target.h (VECT_COMPARE_COSTS): New constant.
	* target.def (autovectorize_vector_modes): Return a bitmask of flags.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_autovectorize_vector_modes): Update accordingly.
	* targhooks.c (default_autovectorize_vector_modes): Likewise.
	* config/aarch64/aarch64.c (aarch64_autovectorize_vector_modes):
	Likewise.
	* config/arc/arc.c (arc_autovectorize_vector_modes): Likewise.
	* config/arm/arm.c (arm_autovectorize_vector_modes): Likewise.
	* config/i386/i386.c (ix86_autovectorize_vector_modes): Likewise.
	* config/mips/mips.c (mips_autovectorize_vector_modes): Likewise.
	* tree-vectorizer.h (_loop_vec_info::vec_outside_cost)
	(_loop_vec_info::vec_inside_cost): New member variables.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize them.
	(vect_better_loop_vinfo_p, vect_joust_loop_vinfos): New functions.
	(vect_analyze_loop): When autovectorize_vector_modes returns
	VECT_COMPARE_COSTS, try vectorizing the loop with each available
	vector mode and picking the one with the lowest cost.
	(vect_estimate_min_profitable_iters): Record the computed costs
	in the loop_vec_info.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (can_duplicate_and_interleave_p): Take an
	element type rather than an element mode.
	* tree-vect-slp.c (can_duplicate_and_interleave_p): Likewise.
	Use get_vectype_for_scalar_type to query the natural types
	for a given element type rather than basing everything on
	GET_MODE_SIZE (vinfo->vector_mode).  Limit int_mode_for_size
	query to MAX_FIXED_MODE_SIZE.
	(duplicate_and_interleave): Update call accordingly.
	* tree-vect-loop.c (vectorizable_reduction): Likewise.

2019-11-16  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_get_vector_types_for_stmt): Take an
	optional maximum nunits.
	(get_vectype_for_scalar_type): Likewise.  Also declare a form that
	takes an slp_tree.
	(get_mask_type_for_scalar_type): Take an optional slp_tree.
	(vect_get_mask_type_for_stmt): Likewise.
	* tree-vect-data-refs.c (vect_analyze_data_refs): Don't store
	the vector type in STMT_VINFO_VECTYPE for BB vectorization.
	* tree-vect-patterns.c (vect_recog_bool_pattern): Use
	vect_get_vector_types_for_stmt instead of STMT_VINFO_VECTYPE
	to get an assumed vector type for data references.
	* tree-vect-slp.c (vect_update_shared_vectype): New function.
	(vect_update_all_shared_vectypes): Likewise.
	(vect_build_slp_tree_1): Pass the group size to
	vect_get_vector_types_for_stmt.  Use vect_update_shared_vectype
	for BB vectorization.
	(vect_build_slp_tree_2): Call vect_update_all_shared_vectypes
	before building the vectof from scalars.
	(vect_analyze_slp_instance): Pass the group size to
	get_vectype_for_scalar_type.
	(vect_slp_analyze_node_operations_1): Don't recompute the vector
	types for BB vectorization here; just handle the case in which
	we deferred the choice for booleans.
	(vect_get_constant_vectors): Pass the slp_tree to
	get_vectype_for_scalar_type.
	* tree-vect-stmts.c (vect_prologue_cost_for_slp_op): Likewise.
	(vectorizable_call): Likewise.
	(vectorizable_simd_clone_call): Likewise.
	(vectorizable_conversion): Likewise.
	(vectorizable_shift): Likewise.
	(vectorizable_operation): Likewise.
	(vectorizable_comparison): Likewise.
	(vect_is_simple_cond): Take the slp_tree as argument and
	pass it to get_vectype_for_scalar_type.
	(vectorizable_condition): Update call accordingly.
	(get_vectype_for_scalar_type): Take a group_size argument.
	For BB vectorization, limit the the vector to that number
	of elements.  Also define an overload that takes an slp_tree.
	(get_mask_type_for_scalar_type): Add an slp_tree argument and
	pass it to get_vectype_for_scalar_type.
	(vect_get_vector_types_for_stmt): Add a group_size argument
	and pass it to get_vectype_for_scalar_type.  Don't use the
	cached vector type for BB vectorization if a group size is given.
	Handle data references in that case.
	(vect_get_mask_type_for_stmt): Take an slp_tree argument and
	pass it to get_mask_type_for_scalar_type.

2019-11-15  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline.h (do_estimate_edge_time): Add nonspec_time
	parameter.
	(estimate_edge_time): Use it.
	* ipa-inline-analysis.c (do_estimate_edge_time): Add
	ret_nonspec_time parameter.

2019-11-15  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* config/m68k/linux.h (MUSL_DYNAMIC_LINKER): Define.

2019-11-15  Nick Clifton  <nickc@redhat.com>
	    Szabolcs Nagy  <szabolcs.nagy@arm.com>

	PR target/65649
	* config/microblaze/microblaze.c (print_operand): Print value as long.

2019-11-15  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline.c (edge_badness, inline_small_functions): Revert
	accidental commit.

2019-11-15  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* config/gcn/gcn.h (FIXED_REGISTERS): Unfix frame pointer.
	(CALL_USED_REGISTERS): Make frame pointer callee-saved.

2019-11-15  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* config/gcn/gcn.c (MAX_NORMAL_SGPR_COUNT, MAX_NORMAL_VGPR_COUNT): New.
	(gcn_conditional_register_usage): Use constants in place of hard-coded
	values.
	(gcn_hsa_declare_function_name): Set lower bound for number of
	SGPRs/VGPRs in non-leaf kernels to MAX_NORMAL_SGPR_COUNT and
	MAX_NORMAL_VGPR_COUNT.

2019-11-15  Martin Jambor  <mjambor@suse.cz>

	* ipa-utils.h (ipa_remove_useless_jump_functions): Remove stray
	declaration.

2019-11-15  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* config/gcn/gcn.c (default_requested_args): New.
	(gcn_parse_amdgpu_hsa_kernel_attribute): Initialize requested args
	set with default_requested_args.
	(gcn_conditional_register_usage): Limit register usage of non-kernel
	functions.  Reassign fixed registers if a non-standard set of args is
	requested.
	* config/gcn/gcn.h (FIXED_REGISTERS): Fix registers according to ABI.

2019-11-15  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/92528
	* ipa-prop.c (update_jump_functions_after_inlining): Invalidate
	aggregate jump function when inlined-to caller has no edge summary.

2019-11-15  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* config/gcn/gcn.c (gcn_init_cumulative_args): Call reinit_regs.

2019-11-15  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* config/gcn/gcn.c (gcn_expand_prologue): Remove initialization and
	prologue use of v0.
	(print_operand_address): Use v1 for zero vector offset.

2019-11-15  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/92515
	* tree-vect-stmts.c (vectorizable_shift): Record incompatible op1
	types when converting a vector/scalar shift into a vector/vector one,
	using tree_nop_conversion_p instead of useless_type_conversion_p.
	Move the conversion code to the transform block.

2019-11-15  Matthew Malcomson  <matthew.malcomson@arm.com>

	* read-rtl-function.c
	(function_reader::add_fixup_source_location): Take additional
	parameter of a column.
	(function_reader::maybe_read_location): Optionally parse column
	information and pass to add_fixup_source_location.

2019-11-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92512
	* tree-vect-loop.c (check_reduction_path): Fix operand index
	computability check.  Add check for second use in COND_EXPRs.

2019-11-15  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/92515
	* config/rs6000/rs6000-call.c (rs6000_gimple_fold_builtin): Use
	VIEW_CONVERT_EXPR to reinterpret vectors as different types.

2019-11-15  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* config/gcn/gcn.c (gcn_regno_reg_class): Return VCC_CONDITIONAL_REG
	register class for VCC_LO and VCC_HI.
	(gcn_spill_class): Use SGPR_REGS to spill registers in
	VCC_CONDITIONAL_REG.

2019-11-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92324
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Fix
	singedness of SLP reduction epilouge operations.  Also reduce
	the vector width for SLP reductions before doing elementwise
	operations if possible.

2019-11-15  Matthew Malcomson  <matthew.malcomson@arm.com>

	* passes.c (skip_pass): Set epilogue_completed if skipping the
	pro_and_epilogue pass.

2019-11-15  Matthew Malcomson  <matthew.malcomson@arm.com>

	* passes.c (should_skip_pass_p): Always run "dfinish".

2019-11-15  Richard Biener  <rguenther@suse.de>

	* ipa-inline.c (inline_small_functions): Move assignment
	to next before call destroying edge.

2019-11-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92039
	PR tree-optimization/91975
	* tree-ssa-loop-ivcanon.c (constant_after_peeling): Revert
	previous change, treat invariants consistently as non-constant.
	(tree_estimate_loop_size): Ternary ops with just the first op
	constant are not optimized away.

2019-11-15  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (gimplify_call_expr): Don't call
	omp_resolve_declare_variant after gimplification.
	* omp-general.c (omp_context_selector_matches): For isa that might
	match in some other function, defer if in declare simd function.
	(omp_context_compute_score): Don't look for " score" in construct
	trait set.  Set *score to -1 if it can't ever match.
	(omp_resolve_declare_variant): If any variants need to be deferred,
	don't punt immediately, but compute scores of all variants and if
	ther eis a score winner that doesn't need to be deferred, return that.

2019-11-15  Luo Xiong Hu  <luoxhu@linux.ibm.com>

	* ipa-comdats.c: Fix comments typo.
	* ipa-profile.c: Fix comments typo.
	* tree-profile.c (gimple_gen_ic_profiler): Use the new variable
	__gcov_indirect_call.counters and __gcov_indirect_call.callee.
	(gimple_gen_ic_func_profiler): Likewise.
	(pass_ipa_tree_profile::gate): Fix comments typo.

2019-11-15  Xiong Hu Luo  <luoxhu@linux.ibm.com>

	* ipa-inline.c (inline_small_functions): Update iterator of next.

2019-11-14  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* lra-spills.c (assign_spill_hard_regs): Check that the spill
	register is suitable for the mode.

2019-11-14  Andrew MacLeod  <amacleod@redhat.com>

	* range-op.h (range_operator::fold_range): Return a bool.
	* range-op.cc (range_operator::wi_fold): Assert supported type.
	(range_operator::fold_range): Assert supported type and return true.
	(operator_equal::fold_range): Return true.
	(operator_not_equal::fold_range): Same.
	(operator_lt::fold_range): Same.
	(operator_le::fold_range): Same.
	(operator_gt::fold_range): Same.
	(operator_ge::fold_range): Same.
	(operator_plus::op1_range): Adjust call to fold_range.
	(operator_plus::op2_range): Same.
	(operator_minus::op1_range): Same.
	(operator_minus::op2_range): Same.
	(operator_exact_divide::op1_range): Same.
	(operator_lshift::fold_range): Return true and adjust fold_range call.
	(operator_rshift::fold_range): Same.
	(operator_cast::fold_range): Return true.
	(operator_logical_and::fold_range): Same.
	(operator_logical_or::fold_range): Same.
	(operator_logical_not::fold_range): Same.
	(operator_bitwise_not::fold_range): Adjust call to fold_range.
	(operator_bitwise_not::op1_range): Same.
	(operator_cst::fold_range): Return true.
	(operator_identity::fold_range): Return true.
	(operator_negate::fold_range): Return true and adjust fold_range call.
	(operator_addr_expr::fold_range): Return true.
	(operator_addr_expr::op1_range): Adjust call to fold_range.
	(range_cast): Same.
	* tree-vrp.c (range_fold_binary_symbolics_p): Adjust call to fold_range.
	(range_fold_unary_symbolics_p): Same.

2019-11-14  Andrew MacLeod  <amacleod@redhat.com>

	PR tree-optimization/92506
	* range-op.cc (range_operator::fold_range): Start with range undefined.
	(operator_abs::wi_fold): Fix wrong line copy... With wrapv, abs with
	overflow is varying.

2019-11-14  Aldy Hernandez  <aldyh@redhat.com>

	* range-op.cc (*operator*::*range): Remove calls to
	range_intersect, range_invert, and range_union in favor of calling
	the in-place API methods.
	(range_tests): Same.
	* range.cc (range_intersect): Remove.
	(range_union): Remove.
	(range_invert): Remove.
	* range.h (range_intersect): Remove.
	(range_union): Remove.
	(range_intersect): Remove.

2019-11-14  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR rtl-optimization/92430
	* cfgcleanup.c (pass_jump_after_combine::gate): New function.
	(pass_jump_after_combine::execute): Perform jump threading
	unconditionally.

2019-11-14  Jerome Lambourg  <lambourg@adacore.com>
	    Doug Rupp <rupp@adacore.com>
	    Olivier Hainque  <hainque@adacore.com>

	* config.gcc: Collapse the arm-vxworks entries into
	a single arm-wrs-vxworks7* one, bpabi based.  Update
	the default cpu from arm8 to armv7-a
	* config/arm/vxworks.h (CC1_SPEC): Simplify, knowing that
	we always use ARM_UNWIND_INFO.
	(DWARF2_UNWIND_INFO): Remove redefinition.
	(ARM_TARGET2_DWARF_FORMAT): Likewise.
	(VXWORKS_PERSONALITY): Define, to "llvm".
	(VXWORKS_EXTRA_LIBS_RTP): Define, to "-lllvm".

2019-11-14  Jerome Lambourg  <lambourg@adacore.com>

	* config/arm/vxworks.h (TARGET_OS_CPP_BUILTINS): Use
	_VX_CPU instead of CPU and handle arm_arch8.

2019-11-14  Doug Rupp  <rupp@adacore.com>
	    Olivier Hainque  <hainque@adacore.com>
	    Jerome Lambourg  <lambourg@adacore.com>

	* config.gcc: Handle aarch64*-wrs-vxworks7*.
	* config/aarch64/aarch64-vxworks.h: New file.
	* config/aarch64/t-aarch64-vxworks: New file.

2019-11-06  Jerome Lambourg  <lambourg@adacore.com>
	    Olivier Hainque  <hainque@adacore.com>

	* config/vx-common.h (USE_TM_CLONE_REGISTRY): Remove
	definition, pointless with a VxWorks specific version
	of crtstuff.
	(DWARF2_UNWIND_INFO): Conditionalize on !ARM_UNWIND_INFO.
	* config/vxworks.h (VX_CRTBEGIN_SPEC, VX_CRTEND_SPEC):
	New local macros, controlling the addition of vxworks specific
	crtstuff objects depending on the EH mechanism and kind of
	module being linked.
	(VXWORKS_STARTFILE_SPEC, VXWORKS_ENDFILE_SPEC): Use them.

2019-11-06  Pat Bernardi  <bernardi@adacore.com>
            Jerome Lambourg  <lambourg@adacore.com>
            Olivier Hainque  <hainque@adacore.com>

	* config.gcc: Add comment to introduce the TARGET_VXWORKS
	common macro definitions, conveying VXWORKS7 or 64bit general
	variations.  Add a block to set gcc_cv_initfini_array
	unconditionally to "yes" for VxWorks7.
	config/vx-common.h (VXWORKS_CC1_SPEC): New macro, empty string
	by default.  Update some comments.
	config/vxworks.h (VXWORKS_EXTRA_LIBS_RTP): New macro, empty by
	default, to be added the end of VXWORKS_LIBS_RTP.
	(VXWORKS_LIBS_RTP): Replace hardcoded part by VXWORKS_BASE_LIBS_RTP
	and append VXWORKS_EXTRA_LIBS_RTP, both of which specific ports may
	redefine.
	(VXWORKS_NET_LIBS_RTP): Account for VxWorks7 specificities.
	(VXWORKS_CC1_SPEC): Common base definition, with VxWorks7 variation
	to account for the now available TLS abilities.
	(TARGET_LIBC_HAS_FUNCTION): Account for VxWorks7 abilities.
	(VXWORKS_HAVE_TLS): Likewise.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-slp.c (vect_contains_pattern_stmt_p): New function.
	(vect_slp_convert_to_external): Likewise.
	(vect_slp_analyze_node_operations): If analysis fails, try building
	the node from scalars instead.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-cfg.c (verify_gimple_assign_unary): Handle conversions
	between vector types.
	* tree-vect-stmts.c (vectorizable_conversion): Extend the
	non-widening and non-narrowing path to handle standard
	conversion codes, if the target supports them.
	* expr.c (convert_move): Try using the extend and truncate optabs
	for vectors.
	* optabs-tree.c (supportable_convert_operation): Likewise.
	* config/aarch64/iterators.md (Vnarroqw): New iterator.
	* config/aarch64/aarch64-simd.md (<optab><Vnarrowq><mode>2)
	(trunc<mode><Vnarrowq>2): New patterns.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vect_get_vector_types_for_stmt): Don't
	require vectype and nunits_vectype to have the same size;
	instead assert that nunits_vectype has at least as many
	elements as vectype.  Don't compute a separate nunits_vectype
	if the scalar type is obviously the same as vectype's.
	Tweak dump messages.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_vectorize_related_mode): New
	function.
	(aarch64_autovectorize_vector_modes): Also add V4HImode and V2SImode.
	(TARGET_VECTORIZE_RELATED_MODE): Define.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vec_info::mode_set): New typedef.
	(vec_info::used_vector_mode): New member variable.
	(vect_chooses_same_modes_p): Declare.
	* tree-vect-stmts.c (get_vectype_for_scalar_type): Record each
	chosen vector mode in vec_info::used_vector_mode.
	(vect_chooses_same_modes_p): New function.
	* tree-vect-loop.c (vect_analyze_loop): Use it to avoid trying
	the same vector statements multiple times.
	* tree-vect-slp.c (vect_slp_bb_region): Likewise.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* machmode.h (opt_machine_mode::operator==): New function.
	(opt_machine_mode::operator!=): Likewise.
	* tree-vectorizer.h (vec_info::vector_mode): Update comment.
	(get_related_vectype_for_scalar_type): Delete.
	(get_vectype_for_scalar_type_and_size): Declare.
	* tree-vect-slp.c (vect_slp_bb_region): Print dump messages to say
	whether analysis passed or failed, and with what vector modes.
	Use related_vector_mode to check whether trying a particular
	vector mode would be redundant with the autodetected mode,
	and print a dump message if we decide to skip it.
	* tree-vect-loop.c (vect_analyze_loop): Likewise.
	(vect_create_epilog_for_reduction): Use
	get_related_vectype_for_scalar_type instead of
	get_vectype_for_scalar_type_and_size.
	* tree-vect-stmts.c (get_vectype_for_scalar_type_and_size): Replace
	with...
	(get_related_vectype_for_scalar_type): ...this new function.
	Take a starting/"prevailing" vector mode rather than a vector size.
	Take an optional nunits argument, with the same meaning as for
	related_vector_mode.  Use related_vector_mode when not
	auto-detecting a mode, falling back to mode_for_vector if no
	target mode exists.
	(get_vectype_for_scalar_type): Update accordingly.
	(get_same_sized_vectype): Likewise.
	* tree-vectorizer.c (get_vec_alignment_for_array_type): Likewise.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vectorizable_call): Require the types
	to have the same size.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vectorizable_call): If an operand is
	constant or external, use get_vectype_for_scalar_type
	rather than get_same_sized_vectype to get its vector type.
	(vectorizable_conversion, vectorizable_shift): Likewise.
	(vectorizable_operation): Likewise.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vec_info::vector_size): Replace with...
	(vec_info::vector_mode): ...this new field.
	* tree-vect-loop.c (vect_update_vf_for_slp): Update accordingly.
	(vect_analyze_loop, vect_transform_loop): Likewise.
	* tree-vect-loop-manip.c (vect_do_peeling): Likewise.
	* tree-vect-slp.c (can_duplicate_and_interleave_p): Likewise.
	(vect_make_slp_decision, vect_slp_bb_region): Likewise.
	* tree-vect-stmts.c (get_vectype_for_scalar_type): Likewise.
	* tree-vectorizer.c (try_vectorize_loop_1): Likewise.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* target.h (vector_sizes, auto_vector_sizes): Delete.
	(vector_modes, auto_vector_modes): New typedefs.
	* target.def (autovectorize_vector_sizes): Replace with...
	(autovectorize_vector_modes): ...this new hook.
	* doc/tm.texi.in (TARGET_VECTORIZE_AUTOVECTORIZE_VECTOR_SIZES):
	Replace with...
	(TARGET_VECTORIZE_AUTOVECTORIZE_VECTOR_MODES): ...this new hook.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_autovectorize_vector_sizes): Delete.
	(default_autovectorize_vector_modes): New function.
	* targhooks.c (default_autovectorize_vector_sizes): Delete.
	(default_autovectorize_vector_modes): New function.
	* omp-general.c (omp_max_vf): Use autovectorize_vector_modes instead
	of autovectorize_vector_sizes.  Use the number of units in the mode
	to calculate the maximum VF.
	* omp-low.c (omp_clause_aligned_alignment): Use
	autovectorize_vector_modes instead of autovectorize_vector_sizes.
	Use a loop based on related_mode to iterate through all supported
	vector modes for a given scalar mode.
	* optabs-query.c (can_vec_mask_load_store_p): Use
	autovectorize_vector_modes instead of autovectorize_vector_sizes.
	* tree-vect-loop.c (vect_analyze_loop, vect_transform_loop): Likewise.
	* tree-vect-slp.c (vect_slp_bb_region): Likewise.
	* config/aarch64/aarch64.c (aarch64_autovectorize_vector_sizes):
	Replace with...
	(aarch64_autovectorize_vector_modes): ...this new function.
	(TARGET_VECTORIZE_AUTOVECTORIZE_VECTOR_SIZES): Delete.
	(TARGET_VECTORIZE_AUTOVECTORIZE_VECTOR_MODES): Define.
	* config/arc/arc.c (arc_autovectorize_vector_sizes): Replace with...
	(arc_autovectorize_vector_modes): ...this new function.
	(TARGET_VECTORIZE_AUTOVECTORIZE_VECTOR_SIZES): Delete.
	(TARGET_VECTORIZE_AUTOVECTORIZE_VECTOR_MODES): Define.
	* config/arm/arm.c (arm_autovectorize_vector_sizes): Replace with...
	(arm_autovectorize_vector_modes): ...this new function.
	(TARGET_VECTORIZE_AUTOVECTORIZE_VECTOR_SIZES): Delete.
	(TARGET_VECTORIZE_AUTOVECTORIZE_VECTOR_MODES): Define.
	* config/i386/i386.c (ix86_autovectorize_vector_sizes): Replace with...
	(ix86_autovectorize_vector_modes): ...this new function.
	(TARGET_VECTORIZE_AUTOVECTORIZE_VECTOR_SIZES): Delete.
	(TARGET_VECTORIZE_AUTOVECTORIZE_VECTOR_MODES): Define.
	* config/mips/mips.c (mips_autovectorize_vector_sizes): Replace with...
	(mips_autovectorize_vector_modes): ...this new function.
	(TARGET_VECTORIZE_AUTOVECTORIZE_VECTOR_SIZES): Delete.
	(TARGET_VECTORIZE_AUTOVECTORIZE_VECTOR_MODES): Define.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vectorizable_shift): Check the number
	of vector elements as well as the type mode when deciding
	whether an op1_vectype is compatible.  Reuse the result of
	this check when generating vector statements.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (get_vectype_for_scalar_type_and_size): If
	targetm.vectorize.preferred_simd_mode returns an integer mode,
	use mode_for_vector to decide what the vector type's mode
	should actually be.  Use build_vector_type_for_mode instead
	of build_vector_type.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (get_mask_mode): Take a vector mode itself as argument,
	instead of properties about the vector mode.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_get_mask_mode): Update to reflect new
	get_mode_mask interface.
	* targhooks.c (default_get_mask_mode): Likewise.  Use
	related_int_vector_mode.
	* optabs-query.c (can_vec_mask_load_store_p): Update call
	to get_mask_mode.
	* tree-vect-stmts.c (check_load_store_masking): Likewise, checking
	first that the original mode really is a vector.
	* tree.c (build_truth_vector_type_for): Likewise.
	* config/aarch64/aarch64.c (aarch64_get_mask_mode): Update for new
	get_mode_mask interface.
	(aarch64_expand_sve_vcond): Update call accordingly.
	* config/gcn/gcn.c (gcn_vectorize_get_mask_mode): Update for new
	get_mode_mask interface.
	* config/i386/i386.c (ix86_get_mask_mode): Likewise.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* tree.h (build_truth_vector_type): Delete.
	(build_same_sized_truth_vector_type): Likewise.
	* tree.c (build_truth_vector_type): Rename to...
	(build_truth_vector_type_for): ...this.  Make static and take
	a vector type as argument.
	(truth_type_for): Update accordingly.
	(build_same_sized_truth_vector_type): Delete.
	* tree-vect-generic.c (expand_vector_divmod): Use truth_type_for
	instead of build_same_sized_truth_vector_type.
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Likewise.
	(vect_record_loop_mask, vect_get_loop_mask): Likewise.
	* tree-vect-patterns.c (build_mask_conversion): Likeise.
	* tree-vect-slp.c (vect_get_constant_vectors): Likewise.
	* tree-vect-stmts.c (vect_get_vec_def_for_operand): Likewise.
	(vect_build_gather_load_calls, vectorizable_call): Likewise.
	(scan_store_can_perm_p, vectorizable_scan_store): Likewise.
	(vectorizable_store, vectorizable_condition): Likewise.
	(get_mask_type_for_scalar_type, get_same_sized_vectype): Likewise.
	(vect_get_mask_type_for_stmt): Use truth_type_for instead of
	build_truth_vector_type.
	* config/aarch64/aarch64-sve-builtins.cc (gimple_folder::convert_pred):
	Use truth_type_for instead of build_same_sized_truth_vector_type.
	* config/rs6000/rs6000-call.c (fold_build_vec_cmp): Likewise.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* tree.h (build_truth_vector_type_for_mode): Declare.
	* tree.c (build_truth_vector_type_for_mode): New function,
	split out from...
	(build_truth_vector_type): ...here.
	(build_opaque_vector_type): Fix head comment.
	* tree-vectorizer.h (supportable_narrowing_operation): Remove
	vec_info parameter.
	(vect_halve_mask_nunits): Replace vec_info parameter with the
	mode of the new vector.
	(vect_double_mask_nunits): Likewise.
	* tree-vect-loop.c (vect_halve_mask_nunits): Likewise.
	(vect_double_mask_nunits): Likewise.
	* tree-vect-loop-manip.c: Include insn-config.h, rtl.h and recog.h.
	(vect_maybe_permute_loop_masks): Remove vinfo parameter.  Update call
	to vect_halve_mask_nunits, getting the required mode from the unpack
	patterns.
	(vect_set_loop_condition_masked): Update call accordingly.
	* tree-vect-stmts.c (supportable_narrowing_operation): Remove vec_info
	parameter and update call to vect_double_mask_nunits.
	(vectorizable_conversion): Update call accordingly.
	(simple_integer_narrowing): Likewise.  Remove vec_info parameter.
	(vectorizable_call): Update call accordingly.
	(supportable_widening_operation): Update call to
	vect_halve_mask_nunits.
	* config/aarch64/aarch64-sve-builtins.cc (register_builtin_types):
	Use build_truth_vector_type_mode instead of build_truth_vector_type.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* machmode.h (mode_for_int_vector): Delete.
	(related_int_vector_mode): Declare.
	* stor-layout.c (mode_for_int_vector): Delete.
	(related_int_vector_mode): New function.
	* optabs.c (expand_vec_perm_1): Use related_int_vector_mode
	instead of mode_for_int_vector.
	(expand_vec_perm_const): Likewise.
	* config/aarch64/aarch64.c (aarch64_emit_approx_sqrt): Likewise.
	(aarch64_evpc_sve_tbl): Likewise.
	* config/s390/s390.c (s390_expand_vec_compare_cc): Likewise.
	(s390_expand_vcond): Likewise.

2019-11-14  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (related_mode): New hook.
	* doc/tm.texi.in (TARGET_VECTORIZE_RELATED_MODE): New hook.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_vectorize_related_mode): Declare.
	* targhooks.c (default_vectorize_related_mode): New function.
	* machmode.h (related_vector_mode): Declare.
	* stor-layout.c (related_vector_mode): New function.
	* expmed.c (extract_bit_field_1): Use it instead of mode_for_vector.
	* optabs-query.c (qimode_for_vec_perm): Likewise.
	* tree-vect-stmts.c (get_group_load_store_type): Likewise.
	(vectorizable_store, vectorizable_load): Likewise

2019-11-14  Richard Henderson  <richard.henderson@linaro.org>

	* config/arm/aarch-common-protos.h (arm_md_asm_adjust): Declare.
	* config/arm/aarch-common.c (arm_md_asm_adjust): New.
	* config/arm/arm-c.c (arm_cpu_builtins): Define
	__GCC_ASM_FLAG_OUTPUTS__.
	* config/arm/arm.c (TARGET_MD_ASM_ADJUST): New.
	* config/aarch64/aarch64-c.c (aarch64_define_unconditional_macros):
	Define __GCC_ASM_FLAG_OUTPUTS__.
	* config/aarch64/aarch64.c (TARGET_MD_ASM_ADJUST): New.
	* doc/extend.texi (FlagOutputOperands): Add documentation
	for ARM and AArch64.

	* config/arm/arm-modes.def (CC_NZ): Rename from CC_NOOV.
	* config/arm/predicates.md (nz_comparison_operator): Rename
	from noov_comparison_operator.
	* config/arm/arm.c (arm_select_cc_mode): Use CC_NZmode name.
	(arm_gen_dicompare_reg): Likewise.
	(maybe_get_arm_condition_code): Likewise.
	(thumb1_final_prescan_insn): Likewise.
	(arm_emit_coreregs_64bit_shift): Likewise.
	* config/arm/arm.md (addsi3_compare0): Likewise.
	(*addsi3_compare0_scratch, subsi3_compare0): Likewise.
	(*mulsi3_compare0, *mulsi3_compare0_v6): Likewise.
	(*mulsi3_compare0_scratch, *mulsi3_compare0_scratch_v6): Likewise.
	(*mulsi3addsi_compare0, *mulsi3addsi_compare0_v6): Likewise.
	(*mulsi3addsi_compare0_scratch): Likewise.
	(*mulsi3addsi_compare0_scratch_v6): Likewise.
	(*andsi3_compare0, *andsi3_compare0_scratch): Likewise.
	(*zeroextractsi_compare0_scratch): Likewise.
	(*ne_zeroextractsi, *ne_zeroextractsi_shifted): Likewise.
	(*ite_ne_zeroextractsi, *ite_ne_zeroextractsi_shifted): Likewise.
	(andsi_not_shiftsi_si_scc_no_reuse): Likewise.
	(andsi_not_shiftsi_si_scc): Likewise.
	(*andsi_notsi_si_compare0, *andsi_notsi_si_compare0_scratch): Likewise.
	(*iorsi3_compare0, *iorsi3_compare0_scratch): Likewise.
	(*xorsi3_compare0, *xorsi3_compare0_scratch): Likewise.
	(*shiftsi3_compare0, *shiftsi3_compare0_scratch): Likewise.
	(*not_shiftsi_compare0, *not_shiftsi_compare0_scratch): Likewise.
	(*notsi_compare0, *notsi_compare0_scratch): Likewise.
	(return_addr_mask, *check_arch2): Likewise.
	(*arith_shiftsi_compare0, *arith_shiftsi_compare0_scratch): Likewise.
	(*sub_shiftsi_compare0, *sub_shiftsi_compare0_scratch): Likewise.
	(compare_scc splitters): Likewise.
	(movcond_addsi): Likewise.
	* config/arm/thumb2.md (thumb2_addsi3_compare0): Likewise.
	(*thumb2_addsi3_compare0_scratch): Likewise.
	(*thumb2_mulsi_short_compare0): Likewise.
	(*thumb2_mulsi_short_compare0_scratch): Likewise.
	(compare peephole2s): Likewise.
	* config/arm/thumb1.md (thumb1_cbz): Use CC_NZmode and
	nz_comparison_operator names.
	(cbranchsi4_insn): Likewise.

	* config/arm/constraints.md (c): Use cc_register predicate.

	* config/aarch64/constraints.md (c): New constraint.

2019-11-14  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (ipa_call_context::estimate_size_and_time,
	ipa_merge_fn_summary_after_inlining): Micro optimize.

2019-11-14  Jan Hubicka  <hubicka@ucw.cz>

	* params.opt (max-inline-insns-single-O2): Set to 70 (instead of 30).

2019-11-14  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-cp.c (ipa_vr_operation_and_type_effects): Move up in file.
	(ipa_value_range_from_jfunc): New function.
	* ipa-fnsummary.c (evaluate_conditions_for_known_args): Add
	known_value_ranges parameter; use it to evalulate conditions.
	(evaluate_properties_for_edge): Compute known value ranges.
	(ipa_fn_summary_t::duplicate): Update use of
	evaluate_conditions_for_known_args.
	(estimate_ipcp_clone_size_and_time): Likewise.
	(ipa_merge_fn_summary_after_inlining): Likewise.
	* ipa-prop.h (ipa_value_range_from_jfunc): Declare.

2019-11-14  Martin Liska  <mliska@suse.cz>

	* ipa-inline.c (want_inline_small_function_p): Use
	CIF_MAX_INLINE_INSNS_AUTO_LIMIT instead
	of CIF_MAX_INLINE_INSNS_SINGLE_O2_LIMIT.

2019-11-14  Martin Liska  <mliska@suse.cz>

	* ipa-cp.c (devirtualization_time_bonus): Use opt_for_fn
	of a callee to get value of the param.
	* ipa-inline.c (inline_insns_auto): Use proper
	opt_for_fn.
	* opts.c (maybe_default_option): Do not overwrite param
	value if optimization level does not match.  Note that
	params usually have default value set via Init() keyword.
	* params.opt: Remove -param=max-inline-insns-auto-O2.
	* cif-code.def (MAX_INLINE_INSNS_AUTO_O2_LIMIT): Remove.
	* doc/invoke.texi: Remove documentation of
	max-inline-insns-auto-O2.

2019-11-14  Martin Liska  <mliska@suse.cz>

	* tree-switch-conversion.c (switch_conversion::switch_conversion):
	Do not initialize m_other_count.
	(switch_conversion::collect): Do not count m_default_count and
	m_other_count as we use frequencies for edges.
	* tree-switch-conversion.h: Remove m_default_count and m_other_count.

2019-11-14  Martin Liska  <mliska@suse.cz>

	PR other/92329
	* doc/invoke.texi: Document -fallocation-dce.

2019-11-14  Martin Liska  <mliska@suse.cz>

	PR target/92389
	* config/i386/i386.h: Add PTA_AVX512VPOPCNTDQ to
	PTA_ICELAKE_CLIENT which is later interited by
	PTA_ICELAKE_SERVER and PTA_TIGERLAKE.

2019-11-14  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sem_item_optimizer::execute): Save
	loaded_symbols.
	(sem_item_optimizer::parse_nonsingleton_classes):
	Return number of loaded symbols.
	(sem_item_optimizer::merge_classes): Print
	statistics about totally needed symbols.
	* ipa-icf.h (parse_nonsingleton_classes): Change return
	type.
	(merge_classes): Add one argument.

2019-11-14  Martin Liska  <mliska@suse.cz>

	* ipa-icf-gimple.c (func_checker::hash_operand): Improve
	func_checker::hash_operand by handling of FIELD_DECLs.

2019-11-14  Martin Liska  <mliska@suse.cz>

	* ipa-icf-gimple.h (func_checker::func_checker): Add
	default constructor.
	* ipa-icf.c (sem_function::init): Make operand_equal_p
	and hash_operand public.
	(sem_item::add_expr): Remove.
	(sem_item::add_type): Remove.
	(sem_function::hash_stmt): Use m_checker for hashing
	of GIMPLE statements.
	(sem_function::parse): Init with checker.
	(sem_variable::parse): Pass NULL as checker.
	(sem_item_optimizer::parse_funcs_and_vars):
	Pass checker to ::parse function.
	(sem_item_optimizer::parse_nonsingleton_classes): Likewise.
	(sem_variable::parse): New function.
	(sem_variable::get_hash): Only return computed hash value.
	(sem_variable::init): Initialize hash of a variable.
	* ipa-icf.h: Remove add_expr, add_type and add func_checker
	to couple of functions as a new argument.

2019-11-14  Martin Liska  <mliska@suse.cz>

	* ipa-icf-gimple.c (func_checker::compare_gimple_call): Update
	bail out reason.
	(func_checker::compare_gimple_assign): Likewise.

2019-11-14  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/i386-options.c (ix86_omp_device_kind_arch_isa): Don't
	change sse4.2 to sse4_2 and sse4.1 to sse4.1.
	* config/i386/t-omp-device (omp-device-properties-i386): Likewise.

	* omp-general.c (omp_context_name_list_prop): New function.
	(omp_context_selector_matches): Use it.  Return 0 if it returns
	NULL.
	(omp_context_selector_props_compare): Allow equivalency of an
	identifier and a string literal containing no embedded zeros.

2019-11-14  Aldy Hernandez  <aldyh@redhat.com>

	* range-op.cc (RANGE3): Remove.
	(range_tests): Remove all selftest that check for multi-ranges.
	Put tests in namespace selftest.
	* selftest.h: Move range_tests into namespace selftest.
	* value-range.h (class value_range): Unfriend range_tests.

2019-11-14  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (range_fold_binary_symbolics_p): Adapt for
	normalize_symbolics and normalize_addresses working in place.
	(range_fold_unary_symbolics_p): Same.
	(range_fold_unary_symbolics_p): Same.
	* value-range.cc (num_pairs): Same.
	(lower_bound): Same.
	(upper_bound): Same.
	(contains_p): Same.
	(normalize_addresses): Same.
	(normalize_symbolics): Same.
	* value-range.h (normalize_symbolics): Same.
	(normalize_addresses): Same.

2019-11-14  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/91682
	* ipa-prop.h (jump_func_type): New value IPA_JF_LOAD_AGG.
	(ipa_load_agg_data, ipa_agg_value, ipa_agg_value_set): New structs.
	(ipa_agg_jf_item): Add new field jftype and type, redefine field value.
	(ipa_agg_jump_function): Remove member function equal_to.
	(ipa_agg_jump_function_p): Remove typedef.
	(ipa_copy_agg_values, ipa_release_agg_values): New functions.
	* ipa-prop.c (ipa_print_node_jump_functions_for_edge): Dump
	information for aggregate jump function.
	(get_ssa_def_if_simple_copy): Add new parameter rhs_stmt to
	record last definition statement.
	(load_from_unmodified_param_or_agg): New function.
	(ipa_known_agg_contents_list): Add new field type and value, remove
	field constant.
	(build_agg_jump_func_from_list): Rename parameter const_count to
	value_count, build aggregate jump function from ipa_load_agg_data.
	(analyze_agg_content_value): New function.
	(extract_mem_content): Analyze memory store assignment to prepare
	information for aggregate jump function generation.
	(determine_known_aggregate_parts): Add new parameter fbi, remove
	parameter aa_walk_budeget_p.
	(update_jump_functions_after_inlining): Update aggregate jump function.
	(ipa_find_agg_cst_for_param): Change type of parameter agg.
	(try_make_edge_direct_simple_call): Add new parameter new_root.
	(try_make_edge_direct_virtual_call): Add new parameter new_root and
	new_root_info.
	(update_indirect_edges_after_inlining): Pass new argument to
	try_make_edge_direct_simple_call and try_make_edge_direct_virtual_call.
	(ipa_write_jump_function): Write aggregate jump function to file.
	(ipa_read_jump_function): Read aggregate jump function from file.
	(ipa_agg_value::equal_to): Migrate from ipa_agg_jf_item::equal_to.
	* ipa-cp.c (ipa_get_jf_arith_result): New function.
	(ipa_agg_value_from_node): Likewise.
	(ipa_agg_value_set_from_jfunc): Likewise.
	(propagate_vals_across_arith_jfunc): Likewise.
	(propagate_aggregate_lattice): Likewise.
	(ipa_get_jf_pass_through_result): Call ipa_get_jf_arith_result.
	(propagate_vals_across_pass_through): Call
	propagate_vals_across_arith_jfunc.
	(get_clone_agg_value): Move forward.
	(propagate_aggs_across_jump_function): Handle value propagation for
	aggregate jump function.
	(agg_jmp_p_vec_for_t_vec): Remove.
	(context_independent_aggregate_values): Replace vec<ipa_agg_jf_item>
	with vec<ipa_agg_value>.
	(copy_plats_to_inter, intersect_with_plats): Likewise.
	(agg_replacements_to_vector, intersect_with_agg_replacements): Likewise.
	(intersect_aggregate_with_edge): Likewise.
	(find_aggregate_values_for_callers_subset): Likewise.
	(cgraph_edge_brings_all_agg_vals_for_node): Likewise.
	(estimate_local_effects): Replace vec<ipa_agg_jump_function> and
	vec<ipa_agg_jump_function_p> with vec<ipa_agg_value_set>.
	(gather_context_independent_values): Likewise.
	(perform_estimation_of_a_value, decide_whether_version_node): Likewise.
	* ipa-fnsummary.c (evaluate_conditions_for_known_args): Replace
	vec<ipa_agg_jump_function_p> with vec<ipa_agg_value_set>.
	(evaluate_properties_for_edge): Likewise.
	(estimate_edge_devirt_benefit): Likewise.
	(estimate_edge_size_and_time):  Likewise.
	(estimate_calls_size_and_time): Likewise.
	(ipa_call_context::ipa_call_context): Likewise.
	(estimate_ipcp_clone_size_and_time):  Likewise.
	* ipa-fnsummary.h (ipa_call_context): Replace
	vec<ipa_agg_jump_function_p> with vec<ipa_agg_value_set>.
	* ipa-inline-analysis.c (do_estimate_edge_time): Replace
	vec<ipa_agg_jump_function_p> with vec<ipa_agg_value_set>.
	(do_estimate_edge_size): Likewise.
	(do_estimate_edge_hints): Likewise.

2019-11-13  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-cp.c (propagate_vr_across_jump_function): Propagate also across
	binary operations.

2019-11-13  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-profile.c (check_argument_count): Check properly that e_info
	is non-NULL; do not check descriptors.

2019-11-13  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline-analysis.c (do_estimate_edge_time): Relax
	check for ipa profiles.

2019-11-13  Jan Hubicka  <hubicka@ucw.cz>

	PR c++/92421
	* ipa-prop.c (update_indirect_edges_after_inlining):
	Mark parameter as used.
	* ipa-inline.c (recursive_inlining): Reset node cache
	after inlining.
	(inline_small_functions): Remove checking ifdef.
	* ipa-inline-analysis.c (do_estimate_edge_time): Verify
	cache consistency.

2019-11-13  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/92498
	* ipa-profile.c (check_argument_count): Do not ICE when descriptors
	is NULL.
	(ipa_profile): Fix reversed test.

2019-11-13  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-cp.c (ignore_edge_p): Do not check caller flags.
	(propagate_constants_topo): Fix typo.

2019-11-13  Aldy Hernandez  <aldyh@redhat.com>

	* Makefile.in (OBJS): Add value-range.o.
	(GTFILES): Add value-range.h.
	* gengtype.c (open_base_files): Add value-range.h to list of
	header files.
	* tree-vrp.c: Move the following value_range related functions:
	ranges_from_anti_range, value_range, check, equal_p, symbolic_p,
	constant_p, set_undefined, set_varying, may_contain_p,
	singleton_p, type, dump, dump_value_range, debug, vrp_val_max,
	vrp_val_min, vrp_val_is_min, vrp_val_is_max, set, set_nonzero,
	set_zero, vrp_operand_equal_p, range_has_numeric_bounds_p,
	value_inside_range, ranges_from_anti_range, union_ranges,
	intersect_ranges, intersect_helper, union_helper, union_,
	normalize_addresses, normalize_symbolics, num_pairs, lower_bound,
	upper_bound, contains_p, invert, intersect...
	* value-range.cc: ...to here.
	* tree-vrp.h: Move class value_range, enum_value_range_kind, and
	associated inline methods from here...
	* value-range.h: ...to here.

2019-11-13  Dragan Mladjenovic  <dmladjenovic@wavecomp.com>

	* config/mips/mips.md (rotr<mode>3): Sanitize the constant argument
	instead of asserting its value.

(2019-11-13  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-fold.c (size_must_be_zero_p): Rewrite use of value_range
	constructors and set methods so value_range_kind is the last
	argument and defaults to VR_RANGE.
	* gimple-ssa-evrp-analyze.c (record_ranges_from_stmt): Same.
	* ipa-cp.c (propagate_vr_across_jump_function): Same.
	* ipa-prop.c (ipa_get_value_range): Same.
	(ipa_compute_jump_functions_for_edge): Same.
	* range-op.cc (value_range_from_overflowed_bounds): Same.
	(operator_cast::op1_range): Same.
	(range_tests): Same.
	* range.cc (range_nonzero): Same.
	* tree-ssanames.c (get_range_info): Same.
	* tree-vrp.c (value_range_equiv::set): Same.
	(value_range::value_range): Same.
	(value_range_equiv::value_range_equiv): Same.
	(value_range_equiv::update): Same.
	(value_range_equiv::deep_copy): Same.
	(value_range_equiv::move): Same.
	(value_range_equiv::set_undefined): Same.
	(value_range::set): Same.
	(value_range::set_nonzero): Same.
	(ranges_from_anti_range): Same.
	(extract_range_from_plus_minus_expr): Same.
	(value_range::intersect_helper): Same.
	(value_range_equiv::intersect): Same.
	(value_range::union_helper): Same.
	(value_range_equiv::union_): Same.
	(value_range::normalize_symbolics): Same.
	(value_range::invert): Same.
	(determine_value_range_1): Same.
	* tree-vrp.h (class value_range): Same.
	(class value_range_equiv): Same.
	* vr-values.c (set_value_range_to_nonnegative): Same.
	(set_value_range_to_truthvalue): Same.
	(vr_values::update_value_range): Same.
	(vr_values::extract_range_for_var_from_comparison_expr): Same.
	(vr_values::extract_range_from_binary_expr): Same.
	(vr_values::extract_range_from_comparison): Same.
	(vr_values::extract_range_basic): Same.
	(vr_values::adjust_range_with_scev): Same.
	(vr_values::vrp_evaluate_conditional_warnv_with_ops): Same.
	(vr_values::extract_range_from_phi_node): Same.

2019-11-13  Ulrich Drepper  <drepper@redhat.com>

	* tree-dump.c (dequeue_and_dump): Print first tree operand
	for VIEW_CONVERT_EXPR.

2019-11-13  Joseph Myers  <joseph@codesourcery.com>

	* ginclude/float.c [__STDC_VERSION__ > 201710L] (FLT_NORM_MAX,
	DBL_NORM_MAX, LDBL_NORM_MAX): Define.
	* real.c (get_max_float): Add norm_max argument.
	* real.h (get_max_float): Update prototype.
	* builtins.c (fold_builtin_interclass_mathfn): Update calls to
	get_max_float.

2019-11-13  Martin Liska  <mliska@suse.cz>

	* dbgcnt.c (test_sorted_dbg_counters): New.
	(dbgcnt_c_tests): Likewise.
	* selftest-run-tests.c (selftest::run_tests): Likewise.
	* selftest.h (dbgcnt_c_tests): Likewise.

2019-11-13  Jan Hubicka  <hubicka@ucw.cz>
	    Martin Jambor  <mjambor@suse.cz>

	PR ipa/92454
	* ipa-cp.c (spread_undeadness): Check that IPA_NODE_REF exists.
	(identify_dead_nodes): Likewise.

2019-11-13  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sem_function::equals_private): Do not overuse
	push/pop_cfun functions.

2019-11-13  Martin Liska  <mliska@suse.cz>

	* common.opt: Document change of -fdbg-cnt option.
	* dbgcnt.c (DEBUG_COUNTER): Remove.
	(dbg_cnt_is_enabled): Remove.
	(dbg_cnt): Work with new intervals.
	(dbg_cnt_set_limit_by_index): Set to new
	list of intervals.
	(dbg_cnt_set_limit_by_name): Likewise.
	(dbg_cnt_process_single_pair): Process new format.
	(dbg_cnt_process_opt): Likewise.
	(dbg_cnt_list_all_counters): Likewise.
	* doc/invoke.texi: Document change of -fdbg-cnt option.
	(cmp_tuples): New.

2019-11-13  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline.c (ipa_inline): Check that function is defined before
	flattening.

2019-11-13  Andrew Stubbs  <ams@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>

	* config/gcn/gcn.c (gcn_goacc_validate_dims): Ensure
	flag_worker_partitioning is not set.
	(TARGET_GOACC_WORKER_PARTITIONING): Remove target hook definition.
	* config/gcn/gcn.opt (macc-experimental-workers): Default to off.

2019-11-13  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-run.c (heap_region): New global variable.
	(struct hsa_runtime_fn_info): Add hsa_memory_assign_agent_fn.
	(init_hsa_runtime_functions): Initialize hsa_memory_assign_agent.
	(get_kernarg_region): Move contents to ....
	(get_memory_region): .... here.
	(get_heap_region): New function.
	(init_device): Initialize the heap_region.
	(device_malloc): Add region parameter.
	(struct kernargs): Move heap ....
	(heap): ... to global scope.
	(main): Allocate heap separate to kernargs.

2019-11-13  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-prop.c (ipa_print_node_jump_functions,
	ipa_print_node_params): Print info about missing summaries.

2019-11-13  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_estimate_min_profitable_iters): Include
	the cost of generating loop masks.

2019-11-13  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_apply_runtime_profitability_check_p):
	New function.
	* tree-vect-loop-manip.c (vect_loop_versioning): Use it.
	* tree-vect-loop.c (vect_analyze_loop_2): Likewise.
	(vect_transform_loop): Likewise.
	(vect_analyze_loop_costing): Don't take the cost of versioning
	into account for the static profitability threshold if it turns
	out that no versioning is needed.

2019-11-13  Jan Hubicka  <hubicka@ucw.cz>

	* ipa.c (cgraph_build_static_cdtor): Pass optimization_default_node
	and target_option_default_node to get -fprofile-generate ctors working
	right with LTO.

2019-11-13  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_nop_conversion_p): Declare.
	* tree-vect-stmts.c (vect_nop_conversion_p): New function.
	(vectorizable_assignment): Don't add a cost for nop conversions.
	* tree-vect-loop.c (vect_compute_single_scalar_iteration_cost):
	Likewise.
	* tree-vect-slp.c (vect_bb_slp_scalar_cost): Likewise.

2019-11-13  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vect_model_promotion_demotion_cost): Take the
	number of ncopies as an additional argument.
	(vectorizable_conversion): Update call accordingly.  Use "modifier"
	to check whether a conversion is between vectors with the same
	numbers of units.

2019-11-13  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins-functions.h
	(unary_count::expand): Use aarch64_sve_int_mode instead of
	mode_for_int_vector.

2019-11-13  Martin Liska  <mliska@suse.cz>

	* opts.c: Update comment about OPT_LEVELS_2_PLUS_SPEED_ONLY.

2019-11-13  Martin Liska  <mliska@suse.cz>

	* tree-streamer-in.c (lto_input_ts_function_decl_tree_pointers):
	Remove call to finalize_options_struct.

2019-11-13  Georg-Johann Lay  <avr@gjlay.de>

	PR target/92055
	* config/avr/t-avr (avr-mcus): Do not depend on
	$(srcdir)/config/avr/t-multilib.

2019-11-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92473
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Perform
	direct optab reduction in the correct type.

2019-11-12  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (rs6000_set_fpscr_drn): Use ULL on big
	hexadecimal literal.

2019-11-12  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/vsx.md (xscmpexpdp_<code> for CMP_TEST): Handle
	UNORDERED if !HONOR_NANS (DFmode).
	(xscmpexpqp_<code>_<mode> for CMP_TEST and IEEE128): Handle UNORDERED
	if !HONOR_NANS (<MODE>mode).

2019-11-12  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-cp.c (ignore_edge_p): Also look for optimize flag.
	(ipcp_verify_propagated_values): Likewise.
	(propagate_constants_across_call): Likewise.
	(propagate_constants_topo): Likewise.
	(ipcp_propagate_stage): Likewise.

2019-11-12  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/92471
	* ipa-profile.c (check_argument_count): Break out from ...;
	watch for missing summaries.
	(ipa_profile): Here.

2019-11-12  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/92412
	* targhooks.c (default_ref_may_alias_errno): Errono can only alias
	extern variables.

2019-11-12  Martin Sebor  <msebor@redhat.com>

	PR middle-end/83688
	* gimple-ssa-sprintf.c (format_result::alias_info): New struct.
	(directive::argno): New member.
	(format_result::aliases, format_result::alias_count): New data members.
	(format_result::append_alias): New member function.
	(fmtresult::dst_offset): New data member.
	(pass_sprintf_length::call_info::dst_origin): New data member.
	(pass_sprintf_length::call_info::dst_field, dst_offset): Same.
	(char_type_p, array_elt_at_offset, field_at_offset): New functions.
	(get_origin_and_offset): Same.
	(format_string): Call it.
	(format_directive): Call append_alias and set directive argument
	number.
	(maybe_warn_overlap): New function.
	(pass_sprintf_length::compute_format_length): Call it.
	(pass_sprintf_length::handle_gimple_call): Initialize new members.
	* tree-ssa-strlen.c (): Also enable when -Wrestrict is on.

2019-11-12  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR rtl-optimization/92430
	* cfgcleanup.c (pass_jump_after_combine::execute): Free
	dominance info at the beginning.

2019-11-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92460
	* tree-vect-stmts.c (vectorizable_simd_clone_call): Unshare
	expression before gimplifying.

2019-11-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92461
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Update
	stmt after propagation.

2019-11-12  Martin Liska  <mliska@suse.cz>

	* config/i386/i386-options.c (ix86_recompute_optlev_based_flags):
	Use SET_OPTION_IF_UNSET.
	(ix86_option_override_internal): Likewise.
	* opts.c (default_options_optimization): Likewise.
	(finish_options): Likewise.
	(enable_fdo_optimizations): Likewise.
	(common_handle_option): Likewise.

2019-11-12  Martin Liska  <mliska@suse.cz>

	* common/common-target.def: Remove option_validate_param and
	option_default_params.
	* common/common-targhooks.c (default_option_validate_param):
	Remove.
	* common/common-targhooks.h (default_option_validate_param):
	Remove.
	* common/config/aarch64/aarch64-common.c (TARGET_OPTION_DEFAULT_PARAMS):
	Remove usage of this.
	(TARGET_OPTION_VALIDATE_PARAM): Likewise.
	(aarch64_option_validate_param): Likewise.
	(aarch64_option_default_params): Likewise
	* common/config/bpf/bpf-common.c (bpf_option_default_params): Likewise.
	(TARGET_OPTION_DEFAULT_PARAMS): Likewise.
	* common/config/ia64/ia64-common.c (ia64_option_default_params): Likewise.
	(TARGET_OPTION_DEFAULT_PARAMS): Likewise.
	* common/config/powerpcspe/powerpcspe-common.c (rs6000_option_default_params): Likewise.
	(TARGET_OPTION_DEFAULT_PARAMS): Likewise.
	* common/config/rs6000/rs6000-common.c (rs6000_option_default_params): Likewise.
	(TARGET_OPTION_DEFAULT_PARAMS): Likewise.
	* common/config/sh/sh-common.c (sh_option_default_params): Likewise.
	(TARGET_OPTION_DEFAULT_PARAMS): Likewise.
	* config/aarch64/aarch64.c (aarch64_override_options_internal): Validate
	guard_size here.
	* doc/tm.texi: Remove option_default_params and option_validate_param.
	* doc/tm.texi.in: Likewise.

2019-11-12  Martin Liska  <mliska@suse.cz>

	* common/common-target.def:
	Do not mention set_default_param_value
	and set_param_value.
	* doc/tm.texi: Likewise.

2019-11-12  Martin Liska  <mliska@suse.cz>

	* common.opt: Remove param_values.
	* config/i386/i386-options.c (ix86_valid_target_attribute_p):
	Remove finalize_options_struct.
	* gcc.c (driver::decode_argv): Do not call global_init_params
	and finish_params.
	(driver::finalize): Do not call params_c_finalize
	and finalize_options_struct.
	* opt-suggestions.c (option_proposer::get_completions): Remove
	special casing of params.
	(option_proposer::find_param_completions): Remove.
	(test_completion_partial_match): Update expected output.
	* opt-suggestions.h: Remove find_param_completions.
	* opts-common.c (add_misspelling_candidates): Add
	--param with a space.
	* opts.c (handle_param): Remove.
	(init_options_struct):. Remove init_options_struct and
	similar calls.
	(finalize_options_struct): Remove.
	(common_handle_option): Use SET_OPTION_IF_UNSET.
	* opts.h (finalize_options_struct): Remove.
	* toplev.c (general_init): Do not call global_init_params.
	(toplev::finalize): Do not call params_c_finalize and
	finalize_options_struct.

2019-11-12  Martin Liska  <mliska@suse.cz>

	* Makefile.in: Remove PARAMS_H and params.list
	and params.options.
	* params-enum.h: Remove.
	* params-list.h: Remove.
	* params-options.h: Remove.
	* params.c: Remove.
	* params.def: Remove.
	* params.h: Remove.
	* asan.c: Do not include params.h.
	* auto-profile.c: Likewise.
	* bb-reorder.c: Likewise.
	* builtins.c: Likewise.
	* cfgcleanup.c: Likewise.
	* cfgexpand.c: Likewise.
	* cfgloopanal.c: Likewise.
	* cgraph.c: Likewise.
	* combine.c: Likewise.
	* common/config/aarch64/aarch64-common.c: Likewise.
	* common/config/gcn/gcn-common.c: Likewise.
	* common/config/ia64/ia64-common.c: Likewise.
	* common/config/powerpcspe/powerpcspe-common.c: Likewise.
	* common/config/rs6000/rs6000-common.c: Likewise.
	* common/config/sh/sh-common.c: Likewise.
	* config/aarch64/aarch64.c: Likewise.
	* config/alpha/alpha.c: Likewise.
	* config/arm/arm.c: Likewise.
	* config/avr/avr.c: Likewise.
	* config/csky/csky.c: Likewise.
	* config/i386/i386-builtins.c: Likewise.
	* config/i386/i386-expand.c: Likewise.
	* config/i386/i386-features.c: Likewise.
	* config/i386/i386-options.c: Likewise.
	* config/i386/i386.c: Likewise.
	* config/ia64/ia64.c: Likewise.
	* config/rs6000/rs6000-logue.c: Likewise.
	* config/rs6000/rs6000.c: Likewise.
	* config/s390/s390.c: Likewise.
	* config/sparc/sparc.c: Likewise.
	* config/visium/visium.c: Likewise.
	* coverage.c: Likewise.
	* cprop.c: Likewise.
	* cse.c: Likewise.
	* cselib.c: Likewise.
	* dse.c: Likewise.
	* emit-rtl.c: Likewise.
	* explow.c: Likewise.
	* final.c: Likewise.
	* fold-const.c: Likewise.
	* gcc.c: Likewise.
	* gcse.c: Likewise.
	* ggc-common.c: Likewise.
	* ggc-page.c: Likewise.
	* gimple-loop-interchange.cc: Likewise.
	* gimple-loop-jam.c: Likewise.
	* gimple-loop-versioning.cc: Likewise.
	* gimple-ssa-split-paths.c: Likewise.
	* gimple-ssa-sprintf.c: Likewise.
	* gimple-ssa-store-merging.c: Likewise.
	* gimple-ssa-strength-reduction.c: Likewise.
	* gimple-ssa-warn-alloca.c: Likewise.
	* gimple-ssa-warn-restrict.c: Likewise.
	* graphite-isl-ast-to-gimple.c: Likewise.
	* graphite-optimize-isl.c: Likewise.
	* graphite-scop-detection.c: Likewise.
	* graphite-sese-to-poly.c: Likewise.
	* graphite.c: Likewise.
	* haifa-sched.c: Likewise.
	* hsa-gen.c: Likewise.
	* ifcvt.c: Likewise.
	* ipa-cp.c: Likewise.
	* ipa-fnsummary.c: Likewise.
	* ipa-inline-analysis.c: Likewise.
	* ipa-inline.c: Likewise.
	* ipa-polymorphic-call.c: Likewise.
	* ipa-profile.c: Likewise.
	* ipa-prop.c: Likewise.
	* ipa-split.c: Likewise.
	* ipa-sra.c: Likewise.
	* ira-build.c: Likewise.
	* ira-conflicts.c: Likewise.
	* loop-doloop.c: Likewise.
	* loop-invariant.c: Likewise.
	* loop-unroll.c: Likewise.
	* lra-assigns.c: Likewise.
	* lra-constraints.c: Likewise.
	* modulo-sched.c: Likewise.
	* opt-suggestions.c: Likewise.
	* opts.c: Likewise.
	* postreload-gcse.c: Likewise.
	* predict.c: Likewise.
	* reload.c: Likewise.
	* reorg.c: Likewise.
	* resource.c: Likewise.
	* sanopt.c: Likewise.
	* sched-deps.c: Likewise.
	* sched-ebb.c: Likewise.
	* sched-rgn.c: Likewise.
	* sel-sched-ir.c: Likewise.
	* sel-sched.c: Likewise.
	* shrink-wrap.c: Likewise.
	* stmt.c: Likewise.
	* targhooks.c: Likewise.
	* toplev.c: Likewise.
	* tracer.c: Likewise.
	* trans-mem.c: Likewise.
	* tree-chrec.c: Likewise.
	* tree-data-ref.c: Likewise.
	* tree-if-conv.c: Likewise.
	* tree-inline.c: Likewise.
	* tree-loop-distribution.c: Likewise.
	* tree-parloops.c: Likewise.
	* tree-predcom.c: Likewise.
	* tree-profile.c: Likewise.
	* tree-scalar-evolution.c: Likewise.
	* tree-sra.c: Likewise.
	* tree-ssa-ccp.c: Likewise.
	* tree-ssa-dom.c: Likewise.
	* tree-ssa-dse.c: Likewise.
	* tree-ssa-ifcombine.c: Likewise.
	* tree-ssa-loop-ch.c: Likewise.
	* tree-ssa-loop-im.c: Likewise.
	* tree-ssa-loop-ivcanon.c: Likewise.
	* tree-ssa-loop-ivopts.c: Likewise.
	* tree-ssa-loop-manip.c: Likewise.
	* tree-ssa-loop-niter.c: Likewise.
	* tree-ssa-loop-prefetch.c: Likewise.
	* tree-ssa-loop-unswitch.c: Likewise.
	* tree-ssa-math-opts.c: Likewise.
	* tree-ssa-phiopt.c: Likewise.
	* tree-ssa-pre.c: Likewise.
	* tree-ssa-reassoc.c: Likewise.
	* tree-ssa-sccvn.c: Likewise.
	* tree-ssa-scopedtables.c: Likewise.
	* tree-ssa-sink.c: Likewise.
	* tree-ssa-strlen.c: Likewise.
	* tree-ssa-structalias.c: Likewise.
	* tree-ssa-tail-merge.c: Likewise.
	* tree-ssa-threadbackward.c: Likewise.
	* tree-ssa-threadedge.c: Likewise.
	* tree-ssa-uninit.c: Likewise.
	* tree-switch-conversion.c: Likewise.
	* tree-vect-data-refs.c: Likewise.
	* tree-vect-loop.c: Likewise.
	* tree-vect-slp.c: Likewise.
	* tree-vrp.c: Likewise.
	* tree.c: Likewise.
	* value-prof.c: Likewise.
	* var-tracking.c: Likewise.

2019-11-12  Martin Liska  <mliska@suse.cz>

	* asan.c (asan_sanitize_stack_p): Replace old parameter syntax
	with the new one, include opts.h if needed.  Use SET_OPTION_IF_UNSET
	macro.
	(asan_sanitize_allocas_p): Likewise.
	(asan_emit_stack_protection): Likewise.
	(asan_protect_global): Likewise.
	(instrument_derefs): Likewise.
	(instrument_builtin_call): Likewise.
	(asan_expand_mark_ifn): Likewise.
	* auto-profile.c (auto_profile): Likewise.
	* bb-reorder.c (copy_bb_p): Likewise.
	(duplicate_computed_gotos): Likewise.
	* builtins.c (inline_expand_builtin_string_cmp): Likewise.
	* cfgcleanup.c (try_crossjump_to_edge): Likewise.
	(try_crossjump_bb): Likewise.
	* cfgexpand.c (defer_stack_allocation): Likewise.
	(stack_protect_classify_type): Likewise.
	(pass_expand::execute): Likewise.
	* cfgloopanal.c (expected_loop_iterations_unbounded): Likewise.
	(estimate_reg_pressure_cost): Likewise.
	* cgraph.c (cgraph_edge::maybe_hot_p): Likewise.
	* combine.c (combine_instructions): Likewise.
	(record_value_for_reg): Likewise.
	* common/config/aarch64/aarch64-common.c (aarch64_option_validate_param): Likewise.
	(aarch64_option_default_params): Likewise.
	* common/config/ia64/ia64-common.c (ia64_option_default_params): Likewise.
	* common/config/powerpcspe/powerpcspe-common.c (rs6000_option_default_params): Likewise.
	* common/config/rs6000/rs6000-common.c (rs6000_option_default_params): Likewise.
	* common/config/sh/sh-common.c (sh_option_default_params): Likewise.
	* config/aarch64/aarch64.c (aarch64_output_probe_stack_range): Likewise.
	(aarch64_allocate_and_probe_stack_space): Likewise.
	(aarch64_expand_epilogue): Likewise.
	(aarch64_override_options_internal): Likewise.
	* config/alpha/alpha.c (alpha_option_override): Likewise.
	* config/arm/arm.c (arm_option_override): Likewise.
	(arm_valid_target_attribute_p): Likewise.
	* config/i386/i386-options.c (ix86_option_override_internal): Likewise.
	* config/i386/i386.c (get_probe_interval): Likewise.
	(ix86_adjust_stack_and_probe_stack_clash): Likewise.
	(ix86_max_noce_ifcvt_seq_cost): Likewise.
	* config/ia64/ia64.c (ia64_adjust_cost): Likewise.
	* config/rs6000/rs6000-logue.c (get_stack_clash_protection_probe_interval): Likewise.
	(get_stack_clash_protection_guard_size): Likewise.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Likewise.
	* config/s390/s390.c (allocate_stack_space): Likewise.
	(s390_emit_prologue): Likewise.
	(s390_option_override_internal): Likewise.
	* config/sparc/sparc.c (sparc_option_override): Likewise.
	* config/visium/visium.c (visium_option_override): Likewise.
	* coverage.c (get_coverage_counts): Likewise.
	(coverage_compute_profile_id): Likewise.
	(coverage_begin_function): Likewise.
	(coverage_end_function): Likewise.
	* cse.c (cse_find_path): Likewise.
	(cse_extended_basic_block): Likewise.
	(cse_main): Likewise.
	* cselib.c (cselib_invalidate_mem): Likewise.
	* dse.c (dse_step1): Likewise.
	* emit-rtl.c (set_new_first_and_last_insn): Likewise.
	(get_max_insn_count): Likewise.
	(make_debug_insn_raw): Likewise.
	(init_emit): Likewise.
	* explow.c (compute_stack_clash_protection_loop_data): Likewise.
	* final.c (compute_alignments): Likewise.
	* fold-const.c (fold_range_test): Likewise.
	(fold_truth_andor): Likewise.
	(tree_single_nonnegative_warnv_p): Likewise.
	(integer_valued_real_single_p): Likewise.
	* gcse.c (want_to_gcse_p): Likewise.
	(prune_insertions_deletions): Likewise.
	(hoist_code): Likewise.
	(gcse_or_cprop_is_too_expensive): Likewise.
	* ggc-common.c: Likewise.
	* ggc-page.c (ggc_collect): Likewise.
	* gimple-loop-interchange.cc (MAX_NUM_STMT): Likewise.
	(MAX_DATAREFS): Likewise.
	(OUTER_STRIDE_RATIO): Likewise.
	* gimple-loop-jam.c (tree_loop_unroll_and_jam): Likewise.
	* gimple-loop-versioning.cc (loop_versioning::max_insns_for_loop): Likewise.
	* gimple-ssa-split-paths.c (is_feasible_trace): Likewise.
	* gimple-ssa-store-merging.c (imm_store_chain_info::try_coalesce_bswap): Likewise.
	(imm_store_chain_info::coalesce_immediate_stores): Likewise.
	(imm_store_chain_info::output_merged_store): Likewise.
	(pass_store_merging::process_store): Likewise.
	* gimple-ssa-strength-reduction.c (find_basis_for_base_expr): Likewise.
	* graphite-isl-ast-to-gimple.c (class translate_isl_ast_to_gimple): Likewise.
	(scop_to_isl_ast): Likewise.
	* graphite-optimize-isl.c (get_schedule_for_node_st): Likewise.
	(optimize_isl): Likewise.
	* graphite-scop-detection.c (build_scops): Likewise.
	* haifa-sched.c (set_modulo_params): Likewise.
	(rank_for_schedule): Likewise.
	(model_add_to_worklist): Likewise.
	(model_promote_insn): Likewise.
	(model_choose_insn): Likewise.
	(queue_to_ready): Likewise.
	(autopref_multipass_dfa_lookahead_guard): Likewise.
	(schedule_block): Likewise.
	(sched_init): Likewise.
	* hsa-gen.c (init_prologue): Likewise.
	* ifcvt.c (bb_ok_for_noce_convert_multiple_sets): Likewise.
	(cond_move_process_if_block): Likewise.
	* ipa-cp.c (ipcp_lattice::add_value): Likewise.
	(merge_agg_lats_step): Likewise.
	(devirtualization_time_bonus): Likewise.
	(hint_time_bonus): Likewise.
	(incorporate_penalties): Likewise.
	(good_cloning_opportunity_p): Likewise.
	(ipcp_propagate_stage): Likewise.
	* ipa-fnsummary.c (decompose_param_expr): Likewise.
	(set_switch_stmt_execution_predicate): Likewise.
	(analyze_function_body): Likewise.
	(compute_fn_summary): Likewise.
	* ipa-inline-analysis.c (estimate_growth): Likewise.
	* ipa-inline.c (caller_growth_limits): Likewise.
	(inline_insns_single): Likewise.
	(inline_insns_auto): Likewise.
	(can_inline_edge_by_limits_p): Likewise.
	(want_early_inline_function_p): Likewise.
	(big_speedup_p): Likewise.
	(want_inline_small_function_p): Likewise.
	(want_inline_self_recursive_call_p): Likewise.
	(edge_badness): Likewise.
	(recursive_inlining): Likewise.
	(compute_max_insns): Likewise.
	(early_inliner): Likewise.
	* ipa-polymorphic-call.c (csftc_abort_walking_p): Likewise.
	* ipa-profile.c (ipa_profile): Likewise.
	* ipa-prop.c (determine_known_aggregate_parts): Likewise.
	(ipa_analyze_node): Likewise.
	(ipcp_transform_function): Likewise.
	* ipa-split.c (consider_split): Likewise.
	* ipa-sra.c (allocate_access): Likewise.
	(process_scan_results): Likewise.
	(ipa_sra_summarize_function): Likewise.
	(pull_accesses_from_callee): Likewise.
	* ira-build.c (loop_compare_func): Likewise.
	(mark_loops_for_removal): Likewise.
	* ira-conflicts.c (build_conflict_bit_table): Likewise.
	* loop-doloop.c (doloop_optimize): Likewise.
	* loop-invariant.c (gain_for_invariant): Likewise.
	(move_loop_invariants): Likewise.
	* loop-unroll.c (decide_unroll_constant_iterations): Likewise.
	(decide_unroll_runtime_iterations): Likewise.
	(decide_unroll_stupid): Likewise.
	(expand_var_during_unrolling): Likewise.
	* lra-assigns.c (spill_for): Likewise.
	* lra-constraints.c (EBB_PROBABILITY_CUTOFF): Likewise.
	* modulo-sched.c (sms_schedule): Likewise.
	(DFA_HISTORY): Likewise.
	* opts.c (default_options_optimization): Likewise.
	(finish_options): Likewise.
	(common_handle_option): Likewise.
	* postreload-gcse.c (eliminate_partially_redundant_load): Likewise.
	(if): Likewise.
	* predict.c (get_hot_bb_threshold): Likewise.
	(maybe_hot_count_p): Likewise.
	(probably_never_executed): Likewise.
	(predictable_edge_p): Likewise.
	(predict_loops): Likewise.
	(expr_expected_value_1): Likewise.
	(tree_predict_by_opcode): Likewise.
	(handle_missing_profiles): Likewise.
	* reload.c (find_equiv_reg): Likewise.
	* reorg.c (redundant_insn): Likewise.
	* resource.c (mark_target_live_regs): Likewise.
	(incr_ticks_for_insn): Likewise.
	* sanopt.c (pass_sanopt::execute): Likewise.
	* sched-deps.c (sched_analyze_1): Likewise.
	(sched_analyze_2): Likewise.
	(sched_analyze_insn): Likewise.
	(deps_analyze_insn): Likewise.
	* sched-ebb.c (schedule_ebbs): Likewise.
	* sched-rgn.c (find_single_block_region): Likewise.
	(too_large): Likewise.
	(haifa_find_rgns): Likewise.
	(extend_rgns): Likewise.
	(new_ready): Likewise.
	(schedule_region): Likewise.
	(sched_rgn_init): Likewise.
	* sel-sched-ir.c (make_region_from_loop): Likewise.
	* sel-sched-ir.h (MAX_WS): Likewise.
	* sel-sched.c (process_pipelined_exprs): Likewise.
	(sel_setup_region_sched_flags): Likewise.
	* shrink-wrap.c (try_shrink_wrapping): Likewise.
	* targhooks.c (default_max_noce_ifcvt_seq_cost): Likewise.
	* toplev.c (print_version): Likewise.
	(process_options): Likewise.
	* tracer.c (tail_duplicate): Likewise.
	* trans-mem.c (tm_log_add): Likewise.
	* tree-chrec.c (chrec_fold_plus_1): Likewise.
	* tree-data-ref.c (split_constant_offset): Likewise.
	(compute_all_dependences): Likewise.
	* tree-if-conv.c (MAX_PHI_ARG_NUM): Likewise.
	* tree-inline.c (remap_gimple_stmt): Likewise.
	* tree-loop-distribution.c (MAX_DATAREFS_NUM): Likewise.
	* tree-parloops.c (MIN_PER_THREAD): Likewise.
	(create_parallel_loop): Likewise.
	* tree-predcom.c (determine_unroll_factor): Likewise.
	* tree-scalar-evolution.c (instantiate_scev_r): Likewise.
	* tree-sra.c (analyze_all_variable_accesses): Likewise.
	* tree-ssa-ccp.c (fold_builtin_alloca_with_align): Likewise.
	* tree-ssa-dse.c (setup_live_bytes_from_ref): Likewise.
	(dse_optimize_redundant_stores): Likewise.
	(dse_classify_store): Likewise.
	* tree-ssa-ifcombine.c (ifcombine_ifandif): Likewise.
	* tree-ssa-loop-ch.c (ch_base::copy_headers): Likewise.
	* tree-ssa-loop-im.c (LIM_EXPENSIVE): Likewise.
	* tree-ssa-loop-ivcanon.c (try_unroll_loop_completely): Likewise.
	(try_peel_loop): Likewise.
	(tree_unroll_loops_completely): Likewise.
	* tree-ssa-loop-ivopts.c (avg_loop_niter): Likewise.
	(CONSIDER_ALL_CANDIDATES_BOUND): Likewise.
	(MAX_CONSIDERED_GROUPS): Likewise.
	(ALWAYS_PRUNE_CAND_SET_BOUND): Likewise.
	* tree-ssa-loop-manip.c (can_unroll_loop_p): Likewise.
	* tree-ssa-loop-niter.c (MAX_ITERATIONS_TO_TRACK): Likewise.
	* tree-ssa-loop-prefetch.c (PREFETCH_BLOCK): Likewise.
	(L1_CACHE_SIZE_BYTES): Likewise.
	(L2_CACHE_SIZE_BYTES): Likewise.
	(should_issue_prefetch_p): Likewise.
	(schedule_prefetches): Likewise.
	(determine_unroll_factor): Likewise.
	(volume_of_references): Likewise.
	(add_subscript_strides): Likewise.
	(self_reuse_distance): Likewise.
	(mem_ref_count_reasonable_p): Likewise.
	(insn_to_prefetch_ratio_too_small_p): Likewise.
	(loop_prefetch_arrays): Likewise.
	(tree_ssa_prefetch_arrays): Likewise.
	* tree-ssa-loop-unswitch.c (tree_unswitch_single_loop): Likewise.
	* tree-ssa-math-opts.c (gimple_expand_builtin_pow): Likewise.
	(convert_mult_to_fma): Likewise.
	(math_opts_dom_walker::after_dom_children): Likewise.
	* tree-ssa-phiopt.c (cond_if_else_store_replacement): Likewise.
	(hoist_adjacent_loads): Likewise.
	(gate_hoist_loads): Likewise.
	* tree-ssa-pre.c (translate_vuse_through_block): Likewise.
	(compute_partial_antic_aux): Likewise.
	* tree-ssa-reassoc.c (get_reassociation_width): Likewise.
	* tree-ssa-sccvn.c (vn_reference_lookup_pieces): Likewise.
	(vn_reference_lookup): Likewise.
	(do_rpo_vn): Likewise.
	* tree-ssa-scopedtables.c (avail_exprs_stack::lookup_avail_expr): Likewise.
	* tree-ssa-sink.c (select_best_block): Likewise.
	* tree-ssa-strlen.c (new_stridx): Likewise.
	(new_addr_stridx): Likewise.
	(get_range_strlen_dynamic): Likewise.
	(class ssa_name_limit_t): Likewise.
	* tree-ssa-structalias.c (push_fields_onto_fieldstack): Likewise.
	(create_variable_info_for_1): Likewise.
	(init_alias_vars): Likewise.
	* tree-ssa-tail-merge.c (find_clusters_1): Likewise.
	(tail_merge_optimize): Likewise.
	* tree-ssa-threadbackward.c (thread_jumps::profitable_jump_thread_path): Likewise.
	(thread_jumps::fsm_find_control_statement_thread_paths): Likewise.
	(thread_jumps::find_jump_threads_backwards): Likewise.
	* tree-ssa-threadedge.c (record_temporary_equivalences_from_stmts_at_dest): Likewise.
	* tree-ssa-uninit.c (compute_control_dep_chain): Likewise.
	* tree-switch-conversion.c (switch_conversion::check_range): Likewise.
	(jump_table_cluster::can_be_handled): Likewise.
	* tree-switch-conversion.h (jump_table_cluster::case_values_threshold): Likewise.
	(SWITCH_CONVERSION_BRANCH_RATIO): Likewise.
	(param_switch_conversion_branch_ratio): Likewise.
	* tree-vect-data-refs.c (vect_mark_for_runtime_alias_test): Likewise.
	(vect_enhance_data_refs_alignment): Likewise.
	(vect_prune_runtime_alias_test_list): Likewise.
	* tree-vect-loop.c (vect_analyze_loop_costing): Likewise.
	(vect_get_datarefs_in_loop): Likewise.
	(vect_analyze_loop): Likewise.
	* tree-vect-slp.c (vect_slp_bb): Likewise.
	* tree-vectorizer.h: Likewise.
	* tree-vrp.c (find_switch_asserts): Likewise.
	(vrp_prop::check_mem_ref): Likewise.
	* tree.c (wide_int_to_tree_1): Likewise.
	(cache_integer_cst): Likewise.
	* var-tracking.c (EXPR_USE_DEPTH): Likewise.
	(reverse_op): Likewise.
	(vt_find_locations): Likewise.

2019-11-12  Martin Liska  <mliska@suse.cz>

	* Makefile.in: Include params.opt.
	* flag-types.h (enum parloops_schedule_type): Add
	parloops_schedule_type used in params.opt.
	* params.opt: New file.

2019-11-12  Martin Liska  <mliska@suse.cz>

	* common.opt: Remove --param and --param= options.
	* opt-functions.awk: Mark CL_PARAMS for options
	that have Param keyword.
	* opts-common.c (decode_cmdline_options_to_array):
	Replace --param key=value with --param=key=value.
	* opts.c (print_filtered_help): Remove special
	printing of params.
	(print_specific_help): Update title for params.
	(common_handle_option): Do not handle OPT__param.
	opts.h (SET_OPTION_IF_UNSET): New macro.
	* doc/options.texi: Document Param keyword.

2019-11-12  Maciej W. Rozycki  <macro@codesourcery.com>
	    Frederik Harwath  <frederik@codesourcery.com>
	    Thomas Schwinge  <thomas@codesourcery.com>

	* gimple.h (gf_mask): Add GF_OMP_TARGET_KIND_OACC_SERIAL
	enumeration constant.
	(is_gimple_omp_oacc): Handle GF_OMP_TARGET_KIND_OACC_SERIAL.
	(is_gimple_omp_offloaded): Likewise.
	* gimplify.c (omp_region_type): Add ORT_ACC_SERIAL enumeration
	constant.  Adjust the value of ORT_NONE accordingly.
	(is_gimple_stmt): Handle OACC_SERIAL.
	(oacc_default_clause): Handle ORT_ACC_SERIAL.
	(gomp_needs_data_present): Likewise.
	(gimplify_adjust_omp_clauses): Likewise.
	(gimplify_omp_workshare): Handle OACC_SERIAL.
	(gimplify_expr): Likewise.
	* omp-expand.c (expand_omp_target):
	Handle GF_OMP_TARGET_KIND_OACC_SERIAL.
	(build_omp_regions_1, omp_make_gimple_edges): Likewise.
	* omp-low.c (is_oacc_parallel): Rename function to...
	(is_oacc_parallel_or_serial): ... this.
	Handle GF_OMP_TARGET_KIND_OACC_SERIAL.
	(scan_sharing_clauses): Adjust accordingly.
	(scan_omp_for): Likewise.
	(lower_oacc_head_mark): Likewise.
	(convert_from_firstprivate_int): Likewise.
	(lower_omp_target): Likewise.
	(check_omp_nesting_restrictions): Handle
	GF_OMP_TARGET_KIND_OACC_SERIAL.
	(lower_oacc_reductions): Likewise.
	(lower_omp_target): Likewise.
	* tree.def (OACC_SERIAL): New tree code.
	* tree-pretty-print.c (dump_generic_node): Handle OACC_SERIAL.

	* doc/generic.texi (OpenACC): Document OACC_SERIAL.

2019-11-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/92449
	* tree-complex.c (expand_complex_multiplication): If !HONOR_NANS,
	don't emit UNORDERED_EXPR guarded libcall.  Formatting fixes.

	PR tree-optimization/92452
	* tree-vrp.c (vrp_prop::check_array_ref): If TRUNC_DIV_EXPR folds
	into NULL_TREE, set up_bound to NULL_TREE instead of computing
	MINUS_EXPR on it.

2019-11-12  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* tree-vect-loop.c (vect_transform_loop): Don't overwrite epilogues
	safelen with 0.

2019-11-12  Alan Modra  <amodra@gmail.com>

	* config/rs6000/predicates.md (unspec_tls): Allow const0_rtx for got
	element of unspec vec.
	* config/rs6000/rs6000.c (rs6000_legitimize_tls_address): Support
	PC-relative TLS.
	* config/rs6000/rs6000.md (UNSPEC_TLSTLS_PCREL): New unspec.
	(tls_gd_pcrel, tls_ld_pcrel): New insns.
	(tls_dtprel, tls_tprel): Set attr prefixed when tls_size is not 16.
	(tls_got_tprel_pcrel, tls_tls_pcrel): New insns.

2019-11-12  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.opt (mtls-markers): Delete.
	* config/rs6000/rs6000.h (TARGET_TLS_MARKERS): Don't define.
	(IS_NOMARK_TLSGETADDR): Likewise.
	* config/rs6000/rs6000-protos.h (rs6000_output_tlsargs): Delete.
	* config/rs6000/rs6000.c (rs6000_output_tlsargs): Delete.
	(rs6000_legitimize_tls_address): Remove !TARGET_TLS_MARKERS code.
	(rs6000_call_template_1): Delete TARGET_TLS_MARKERS test and
	allow other UNSPECs besides UNSPEC_TLSGD and UNSPEC_TLSLD.
	(rs6000_indirect_call_template_1): Likewise.
	(rs6000_pltseq_template): Likewise.
	(rs6000_opt_vars): Remove "tls-markers" entry.
	* config/rs6000/rs6000.md (tls_gd<bits>): Replace TARGET_TLS_MARKERS
	with TARGET_ELF.
	(tls_gd_high<bits>, tls_gd_low<bits>): Likewise.
	(tls_ld<bits>, tls_ld_high<bits>, tls_ld_low<bits>): Likewise.
	(pltseq_plt_pcrel<mode>): Likewise.
	(call_value_local32): Remove IS_NOMARK_TLSGETADDR predicate test.
	(call_value_local64): Likewise.
	(call_value_indirect_nonlocal_sysv<mode>): Remove IS_NOMARK_TLSGETADDR
	output and length attribute sub-expression.
	(call_value_nonlocal_sysv<mode>),
	(call_value_nonlocal_sysv_secure<mode>),
	(call_value_local_aix<mode>, call_value_nonlocal_aix<mode>),
	(call_value_indirect_aix<mode>, call_value_indirect_elfv2<mode>),
	(call_value_indirect_pcrel<mode>): Likewise.
	* doc/install.texi (powerpc-*-*): Require binutils-2.20.
	* configure.ac (HAVE_AS_TLS_MARKERS): Delete test.
	* configure: Regenerate.
	* config.in: Regenerate.

2019-11-11  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (prefixed_memory): New predicate.
	* config/rs6000/rs6000.md (stack_protect_setdi): Deal with either
	address being a prefixed load/store.
	(stack_protect_testdi): Deal with either address being a prefixed
	load.

2019-11-11  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/92433
	* config/rs6000/rs6000-c.c (altivec_build_resolved_builtin): Guard
	ALTIVEC_BUILTIN_VEC_VCMPGE_P argument swapping with n == 3 check.  Use
	std::swap.

2019-11-11  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/92420
	* tree-vect-stmts.c (get_negative_load_store_type): Move further
	up file.
	(get_group_load_store_type): Use it for reversed SLP accesses.

2019-11-11  Jan Hubicka  <hubcika@ucw.cz>

	* ipa-prop.c (ipa_propagate_indirect_call_infos): Remove ipcp
	summary.
	(ipcp_transformation_t::duplicate): Break out from ...
	(ipa_node_params_t::duplicate): ... here; add copying of agg
	replacements.
	* ipa-prop.h (ipcp_transformation): Add constructor and destructor.
	(ipcp_transformation_t): Add duplicate.

2019-11-11  Janne Blomqvist  <jb@gcc.gnu.org>

        PR fortran/91828
        * doc/install.texi: Document that the minimum MPFR version is
        3.1.0.

2019-11-11  Claudiu Zissulescu <claziss@gmail.com>

	* config/arc/arc.md (movsi_ne): Reorder instruction variants and
	use new register constraint letters.

2019-11-11  Claudiu Zissulescu <claziss@gmail.com>

	* config/arc/arc.c (arc_legitimize_pic_address): Consider UNSPECs
	as well, if interesting recover the symbol and re-legitimize the
	pic address.

2019-11-11  Martin Liska  <mliska@suse.cz>

	* dbgcnt.def (DEBUG_COUNTER): Sort counters
	alphabetically.

2019-11-11  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* tree-vect-loop-manip.c (vect_do_peeling): Take epilogue gaps into
	account when checking if there are enough iterations to vectorize
	epilogue.

2019-11-11  Tobias Burnus  <tobias@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>

	* langhooks-def.h (LANG_HOOKS_OMP_CHECK_OPTIONAL_ARGUMENT):
	Renamed from LANG_HOOKS_OMP_IS_OPTIONAL_ARGUMENT; update define.
	(LANG_HOOKS_DECLS): Rename also here.
	* langhooks.h (lang_hooks_for_decls): Rename
	omp_is_optional_argument to omp_check_optional_argument; take
	additional bool argument.
	* omp-general.h (omp_check_optional_argument): Likewise.
	* omp-general.h (omp_check_optional_argument): Likewise.
	* omp-low.c (lower_omp_target): Update calls; handle absent
	Fortran optional arguments with USE_DEVICE_ADDR/USE_DEVICE_PTR.

2019-11-11  H.J. Lu  <hjl.tools@gmail.com>

	PR target/87833
	* config/i386/intelmic-mkoffload.c (prepare_target_image): Put
	-fPIC and -shared the last to create offload image.

2019-11-11  Thomas Schwinge  <thomas@codesourcery.com>

	* gimplify.c (gimplify_scan_omp_clauses): Assert 'offset2' instead
	of 'offset'.

	* Makefile.in (LANG_CONFIGUREFRAGS): Define.
	(config.status): Use/depend on it.
	* configure.ac (all_lang_configurefrags): Track, 'AC_SUBST'.
	* configure: Regenerate.

2019-11-11  Jiufu Guo  <guojiufu@linux.ibm.com>

	PR tree-optimization/88760
	* config/rs6000/rs6000.opt (-munroll-only-small-loops): New option.
	* common/config/rs6000/rs6000-common.c
	(rs6000_option_optimization_table) [OPT_LEVELS_2_PLUS_SPEED_ONLY]:
	Turn on -funroll-loops and -munroll-only-small-loops.
	[OPT_LEVELS_ALL]: Turn off -fweb and -frename-registers.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Remove
	set of PARAM_MAX_UNROLL_TIMES and PARAM_MAX_UNROLLED_INSNS.
	Turn off -munroll-only-small-loops for explicit -funroll-loops.
	(TARGET_LOOP_UNROLL_ADJUST): Add loop unroll adjust hook.
	(rs6000_loop_unroll_adjust): Define it.  Use -munroll-only-small-loops.

2019-11-11  Kewen Lin  <linkw@gcc.gnu.org>

	* config/rs6000/rs6000.c (rs6000_builtin_vectorization_cost):
	Make scalar_load, vector_load, unaligned_load and
	vector_gather_load cost more to conform hardware latency and
	insn cost settings.

2019-11-10  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h (MACHO_SYMBOL_FLAG_LINKER_VIS): New.
	(MACHO_SYMBOL_LINKER_VIS_P): New.

2019-11-10  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* lra-spills.c (assign_spill_hard_regs): Do not spill into
	registers in eliminable_regset.

2019-11-10  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline.c (compute_uninlined_call_time,
	compute_inlined_call_time): Take edge frequency as
	parameter rather than computing it by itself.
	(big_speedup_p, edge_badness): Manually CSE sreal
	frequency calculations.

2019-11-10  Jan Hubicka  <hubicka@ucw.cz>

	* profile-count.c (profile_count::to_sreal_scale): Short circuit
	case where profiles are same.

2019-11-10  Jan Hubicka  <hubicka@ucw.cz>

	* cgraph.c (cgraph_edge::maybe_hot_p): Do not use sreal_frequency.

2019-11-10  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-prop.c (ipa_propagate_indirect_call_infos): Remove ipa edge
	args summaries of inlined edge unless it holds info about
	described reference.

2019-11-10  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (CC_any): New mode iterator.
	(*movcc_internal1): Rename to...
	(*movcc_<mode> for CC_any): ... this.  Support moves of all CC modes.

2019-11-09  Jan Hubicka  <hubicka@ucw.cz>

	* cgraph.h (struct cgraph_node): Add ipcp_clone flag.
	(cgraph_node::create_virtual_clone): Copy it.
	* ipa-cp.c (ipcp_versionable_function_p): Watch for missing
	summaries.
	(ignore_edge_p): If caller has ipa-cp disabled, skip the edge, too.
	(ipcp_verify_propagated_values): Do not verify nodes where ipcp
	is disabled.
	(propagate_constants_across_call): If callee is not analyzed, give up.
	(propagate_constants_topo): Lower to bottom latties of all callees of
	functions with ipa-cp disabled.
	(ipcp_propagate_stage): Skip functions with ipa-cp disabled.
	(cgraph_edge_brings_value_p): Check for availability first.
	(create_specialized_node): Set ipcp_clone.
	(ipcp_store_bits_results): Check that info is present.
	* ipa-fnsummary.c (evaluate_properties_for_edge): Do not analyze
	thunks.
	(ipa_call_context::duplicate_from, ipa_call_context::equal_to): Be
	conservative when callee summary is missing.
	(remap_edge_summaries): Lookup call summary only when needed.
	* ipa-icf.c (sem_function::param_used_p): Be ready for missing summary.
	* ipa-prpo.c (ipa_alloc_node_params, ipa_initialize_node_params):
	Use get_create.
	(ipa_analyze_node): Use get_create.
	(propagate_controlled_uses): Do not propagate when function is not
	analyzed.
	(ipa_propagate_indirect_call_infos): Remove summary of inline clone.
	(ipa_read_node_info): Use get_create.
	* ipa-prop.h (IPA_NODE_REF): Use get.
	(IPA_NODE_REF_GET_CREATE): New.

2019-11-09  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (evaluate_properties_for_edge): Call IPA_NODE_REF
	on function symbol.

2019-11-09  Jan Hubicka  <hubicka@ucw.cz>

	* tree.c (fld_incomplete_type_of): Clear TYPE_FINAL_P, TYPE_EMPTY_P,
	ENUM_IS_OPAQUE and ENUM_IS_SCOPED.
	(free_lang_data_in_binfo): Clear TREE_PUBLIC in BINFO
	(free_lang_data_in_type): Clear ENUM_IS_OPAQUE and ENUM_IS_SCOPED.

2019-11-09  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline-analysis.c (do_estimate_growth_1): Add support for
	capping the growth cumulated.
	(offline_size): Break out from ...
	(estimate_growth): ... here.
	(check_callers): Add N, OFFLINE and MIN_SIZE and KNOWN_EDGE
	parameters.
	(growth_likely_positive): Turn to ...
	(growth_positive_p): Re-implement.
	* ipa-inline.h (growth_likely_positive): Remove.
	(growth_positive_p): Declare.
	* ipa-inline.c (want_inline_small_function_p): Use
	growth_positive_p.
	(want_inline_function_to_all_callers_p): Likewise.

2019-11-09  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (ipa_call_context::estimate_size_and_time): Fix
	calculation of min_size.
	(ipa_update_overall_fn_summary): Likewise.

2019-11-09  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (estimate_edge_size_and_time): Do not call
	estimate_edge_devirt_benefit when not computing hints;
	do not compute time when not asked for.
	(estimate_calls_size_and_time): Pass NULL hints and time when
	these are not computed; do not evaluate hint predicates when these are
	not computed.
	(ipa_merge_fn_summary_after_inlining): Do not re-evaluate edge
	frequency.

2019-11-09  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/92401
	* gimple-match-head.c (gimple_resimplify1): Call const_unop only
	if res_op->code is an expression with code length 1.
	* gimple-match-head.c (gimple_resimplify2): Call const_binop only
	if res_op->code is an expression with code length 2.
	* gimple-match-head.c (gimple_resimplify3): Call fold_ternary only
	if res_op->code is an expression with code length 3.

2019-11-09  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (machopic_mcount_stub_name): Validate the
	symbol stub name when it is created.
	* config/i386/darwin.h (FUNCTION_PROFILER): Remove the symbol
	stub validation.

2019-11-09  Jakub Jelinek  <jakub@redhat.com>

	* symtab.c: Fix comment typos.
	* cgraphunit.c: Likewise.
	* cgraph.h: Likewise.
	* cgraphclones.c: Likewise.
	* cgraph.c: Likewise.
	* varpool.c: Likewise.
	* tree-ssa-strlen.c: Likewise.
	* ipa-sra.c: Likewise.
	(scan_expr_access, check_all_callers_for_issues): Fix typo
	in a dump message.

2019-11-08  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-protos.h: Add include quard.

2019-11-08  Andrew MacLeod  <amacleod@redhat.com>

	* range-op.h (range_operator::fold_range): Return result in a
	reference parameter instead of by value.
	(range_operator::wi_fold): Same.
	* range-op.cc (range_operator::wi_fold): Return result in a reference
	parameter instead of by value.
	(range_operator::fold_range): Same.
	(value_range_from_overflowed_bounds): Same.
	(value_range_with_overflow): Same
	(create_possibly_reversed_range): Same.
	(operator_equal::fold_range): Same.
	(operator_not_equal::fold_range): Same.
	(operator_lt::fold_range): Same.
	(operator_le::fold_range): Same.
	(operator_gt::fold_range): Same.
	(operator_ge::fold_range): Same.
	(operator_plus::wi_fold): Same.
	(operator_plus::op1_range): Change call to fold_range.
	(operator_plus::op2_range): Change call to fold_range.
	(operator_minus::wi_fold): Return result via reference parameter.
	(operator_minus::op1_range): Change call to fold_range.
	(operator_minus::op2_range): Change call to fold_range.
	(operator_min::wi_fold): Return result via reference parameter.
	(operator_max::wi_fold): Same.
	(cross_product_operator::wi_cross_product): Same.
	(operator_mult::wi_fold): Same.
	(operator_div::wi_fold): Same.
	(operator_div op_floor_div): Fix whitespace.
	(operator_exact_divide::op1_range): Change call to fold_range.
	(operator_lshift::fold_range): Return result via reference parameter.
	(operator_lshift::wi_fold): Same.
	(operator_rshift::fold_range): Same.
	(operator_rshift::wi_fold): Same.
	(operator_cast::fold_range): Same.
	(operator_cast::op1_range): Change calls to fold_range.
	(operator_logical_and::fold_range): Return result via reference.
	(wi_optimize_and_or): Adjust call to value_range_with_overflow.
	(operator_bitwise_and::wi_fold): Return result via reference.
	(operator_logical_or::fold_range): Same.
	(operator_bitwise_or::wi_fold): Same.
	(operator_bitwise_xor::wi_fold): Same.
	(operator_trunc_mod::wi_fold): Same.
	(operator_logical_not::fold_range): Same.
	(operator_bitwise_not::fold_range): Same.
	(operator_bitwise_not::op1_range): Change call to fold_range.
	(operator_cst::fold_range): Return result via reference.
	(operator_identity::fold_range): Same.
	(operator_abs::wi_fold): Same.
	(operator_absu::wi_fold): Same.
	(operator_negate::fold_range): Same.
	(operator_negate::op1_range): Change call to fold_range.
	(operator_addr_expr::fold_range): Return result via reference.
	(operator_addr_expr::op1_range): Change call to fold_range.
	(operator_pointer_plus::wi_fold): Return result via reference.
	(operator_pointer_min_max::wi_fold): Same.
	(operator_pointer_and::wi_fold): Same.
	(operator_pointer_or::wi_fold): Same.
	(range_op_handler): Change call to fold_range.
	(range_cast): Same.
	* tree-vrp.c (range_fold_binary_symbolics_p): Change call to
	fold_range.
	(range_fold_unary_symbolics_p): Same.
	(range_fold_binary_expr): Same.
	(range_fold_unary_expr): Same.

2019-11-08  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (neutral_op_for_slp_reduction): Take the
	vector type as an argument rather than reading it from the
	stmt_vec_info.
	(vect_create_epilog_for_reduction): Update accordingly.
	(vectorizable_reduction): Likewise.
	(vect_transform_cycle_phi): Likewise.

2019-11-08  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/predicates.md (branch_comparison_operator): Allow only
	the comparison codes that make sense for the mode used, and only the
	codes that can be done with a single branch instruction.

2019-11-08  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR tree-optimization/92351
	* tree-vect-data-refs.c (vect_compute_data_ref_alignment): When we are
	peeling the main loop for alignment, make sure to set the misalignment
	of the epilogue's data references to DR_MISALIGNMENT_UNKNOWN.

2019-11-08  Richard Biener  <rguenther@suse.de>

	* dbgcnt.def (ivopts_loop): Add.
	* tree-ssa-loop-ivopts.c (tree_ssa_iv_optimize): Check
	ivopts_loop before optimizing a loop.

2019-11-08  Richard Biener  <rguenther@suse.de>

	PR ipa/92409
	* tree-inline.c (declare_return_variable): Properly handle
	type mismatches for the return slot.

2019-11-08  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/92095
	* config/sparc/sparc-protos.h (output_load_pcrel_sym): Declare.
	* config/sparc/sparc.c (sparc_cannot_force_const_mem): Revert latest
 	change.
	(got_helper_needed): New static variable.
	(output_load_pcrel_sym): New function.
	(get_pc_thunk_name): Remove after inlining...
	(load_got_register): ...here.  Rework the initialization of the GOT
	register and of the GOT helper.
	(save_local_or_in_reg_p): Test the REGNO of the GOT register.
	(sparc_file_end): Test got_helper_needed to decide whether the GOT
	helper must be emitted.  Use output_asm_insn instead of fprintf.
	(sparc_init_pic_reg): In PIC mode, always initialize the PIC register
	if optimization is enabled.
	* config/sparc/sparc.md (load_pcrel_sym<P:mode>): Emit the assembly
	by calling output_load_pcrel_sym.

2019-11-08  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-sra.c (create_access): Delay disqualifying the base
	for poly_int values until we know we have a base.

2019-11-08  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* tree-vect-loop.c (vect_analyze_loop): Disable epilogue vectorization
	for loops with SIMDUID set.  Enable epilogue vectorization for loops
	with SIMDLEN set after finding a main loop with a VF that matches it.

2019-11-08  Jakub Jelinek  <jakub@redhat.com>

	PR target/92038
	* gimple-ssa-store-merging.c (find_constituent_stores): For return
	value only, return non-NULL if there is a single non-clobber
	constituent store even if there are constituent clobbers and return
	one of clobber constituent stores if all constituent stores are
	clobbers.
	(split_group): Handle clobbers.
	(imm_store_chain_info::output_merged_store): When computing
	bzero_first, look after all clobbers at the start.  Don't count
	clobber stmts in orig_num_stmts, except if the first orig store is
	a clobber covering the whole area and split_stores cover the whole
	area, consider equal number of stmts ok.  Punt if split_stores
	contains only ->orig stores and their number plus number of original
	clobbers is equal to original number of stmts.  For ->orig, look past
	clobbers in the constituent stores.
	(imm_store_chain_info::output_merged_stores): Don't remove clobber
	stmts.
	(rhs_valid_for_store_merging_p): Don't return false for clobber stmt
	rhs.
	(store_valid_for_store_merging_p): Allow clobber stmts.
	(verify_clear_bit_region_be): Fix up a thinko in function comment.

	PR c++/92384
	* function.c (assign_parm_setup_block, assign_parm_setup_stack): Don't
	copy TYPE_EMPTY_P arguments from data->entry_parm to data->stack_parm
	slot.
	(assign_parms): For TREE_ADDRESSABLE parms with TYPE_EMPTY_P type
	force creation of a unique data.stack_parm slot.

2019-11-08  Richard Biener  <rguenther@suse.de>

	* genmatch.c (expr::gen_transform): Use the resimplify
	member function instead of hard-coding the gimple_resimplifyN variant.
	(dt_simplify::gen_1): Likewise.

2019-11-08  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-ssa-sccvn.c (copy_reference_ops_from_ref): Handle
	POLY_INT_CST.

2019-11-08  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-inline.c (declare_return_variable): Check for poly_int_tree_p
	instead of INTEGER_CST.

2019-11-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92324
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Use
	STMT_VINFO_REDUC_VECTYPE for all computations, inserting
	sign-conversions as necessary.
	(vectorizable_reduction): Reject conversions in the chain
	that are not sign-conversions, base analysis on a non-converting
	stmt and its operation sign.  Set STMT_VINFO_REDUC_VECTYPE.
	* tree-vect-stmts.c (vect_stmt_relevant_p): Don't dump anything
	for debug stmts.
	* tree-vectorizer.h (_stmt_vec_info::reduc_vectype): New.
	(STMT_VINFO_REDUC_VECTYPE): Likewise.

2019-11-08  Georg-Johann Lay  <avr@gjlay.de>

	PR target/92055
	* config/avr/avr.opt (-mdouble=, -mlong-double=):
	Fix a missing '-' when displaying these options in the
	help screen.

2019-11-08  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SVE_BH, SVE_BHS): Delete.

2019-11-08  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-builtins.c
	(aarch64_builtin_vectorized_function): Remove bswap handling.

2019-11-08  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-core.h (tree_type_common::indivisible_p): New member variable.
	* tree.h (TYPE_INDIVISIBLE_P): New macro.
	* config/aarch64/aarch64-sve-builtins.cc (register_builtin_types):
	Treat the vector types as indivisible.

2019-11-08  Richard Sandiford  <richard.sandiford@arm.com>

	* optabs.def (gather_load_optab, mask_gather_load_optab)
	(scatter_store_optab, mask_scatter_store_optab): Turn into
	conversion optabs, with the offset mode given explicitly.
	* doc/md.texi: Update accordingly.
	* config/aarch64/aarch64-sve-builtins-base.cc
	(svld1_gather_impl::expand): Likewise.
	(svst1_scatter_impl::expand): Likewise.
	* internal-fn.c (gather_load_direct, scatter_store_direct): Likewise.
	(expand_scatter_store_optab_fn): Likewise.
	(direct_gather_load_optab_supported_p): Likewise.
	(direct_scatter_store_optab_supported_p): Likewise.
	(expand_gather_load_optab_fn): Likewise.  Expect the mask argument
	to be argument 4.
	(internal_fn_mask_index): Return 4 for IFN_MASK_GATHER_LOAD.
	(internal_gather_scatter_fn_supported_p): Replace the offset sign
	argument with the offset vector type.  Require the two vector
	types to have the same number of elements but allow their element
	sizes to be different.  Treat the optabs as conversion optabs.
	* internal-fn.h (internal_gather_scatter_fn_supported_p): Update
	prototype accordingly.
	* optabs-query.c (supports_at_least_one_mode_p): Replace with...
	(supports_vec_convert_optab_p): ...this new function.
	(supports_vec_gather_load_p): Update accordingly.
	(supports_vec_scatter_store_p): Likewise.
	* tree-vectorizer.h (vect_gather_scatter_fn_p): Take a vec_info.
	Replace the offset sign and bits parameters with a scalar type tree.
	* tree-vect-data-refs.c (vect_gather_scatter_fn_p): Likewise.
	Pass back the offset vector type instead of the scalar element type.
	Allow the offset to be wider than the memory elements.  Search for
	an offset type that the target supports, stopping once we've
	reached the maximum of the element size and pointer size.
	Update call to internal_gather_scatter_fn_supported_p.
	(vect_check_gather_scatter): Update calls accordingly.
	When testing a new scale before knowing the final offset type,
	check whether the scale is supported for any signed or unsigned
	offset type.  Check whether the target supports the source and
	target types of a conversion before deciding whether to look
	through the conversion.  Record the chosen offset_vectype.
	* tree-vect-patterns.c (vect_get_gather_scatter_offset_type): Delete.
	(vect_recog_gather_scatter_pattern): Get the scalar offset type
	directly from the gs_info's offset_vectype instead.  Pass a zero
	of the result type to IFN_GATHER_LOAD and IFN_MASK_GATHER_LOAD.
	* tree-vect-stmts.c (check_load_store_masking): Update call to
	internal_gather_scatter_fn_supported_p, passing the offset vector
	type recorded in the gs_info.
	(vect_truncate_gather_scatter_offset): Update call to
	vect_check_gather_scatter, leaving it to search for a valid
	offset vector type.
	(vect_use_strided_gather_scatters_p): Convert the offset to the
	element type of the gs_info's offset_vectype.
	(vect_get_gather_scatter_ops): Get the offset vector type directly
	from the gs_info.
	(vect_get_strided_load_store_ops): Likewise.
	(vectorizable_load): Pass a zero of the result type to IFN_GATHER_LOAD
	and IFN_MASK_GATHER_LOAD.
	* config/aarch64/aarch64-sve.md (gather_load<mode>): Rename to...
	(gather_load<mode><v_int_equiv>): ...this.
	(mask_gather_load<mode>): Rename to...
	(mask_gather_load<mode><v_int_equiv>): ...this.
	(scatter_store<mode>): Rename to...
	(scatter_store<mode><v_int_equiv>): ...this.
	(mask_scatter_store<mode>): Rename to...
	(mask_scatter_store<mode><v_int_equiv>): ...this.

2019-11-08  Kewen Lin  <linkw@gcc.gnu.org>

	PR target/92132
	* config/rs6000/predicates.md
	(signed_or_equality_comparison_operator): New predicate.
	(unsigned_or_equality_comparison_operator): Likewise.
	* config/rs6000/rs6000.md (one_cmpl<mode>2): Remove expand.
	(one_cmpl<mode>3_internal): Rename to one_cmpl<mode>2.
	* config/rs6000/vector.md
	(vcond_mask_<mode><mode> for VEC_I and VEC_I): New expand.
	(vec_cmp<mode><mode> for VEC_I and VEC_I): Likewise.
	(vec_cmpu<mode><mode> for VEC_I and VEC_I): Likewise.
	(vcond_mask_<mode><VEC_int> for VEC_F): New expand for float
	vector modes and same-size integer vector modes.
	(vec_cmp<mode><VEC_int> for VEC_F): Likewise.
	(vector_lt<mode> for VEC_F): New expand.
	(vector_le<mode> for VEC_F): Likewise.
	(vector_ne<mode> for VEC_F): Likewise.
	(vector_unge<mode> for VEC_F): Likewise.
	(vector_ungt<mode> for VEC_F): Likewise.
	(vector_unle<mode> for VEC_F): Likewise.
	(vector_unlt<mode> for VEC_F): Likewise.
	(vector_uneq<mode>): Expose name.
	(vector_ltgt<mode>): Likewise.
	(vector_unordered<mode>): Likewise.
	(vector_ordered<mode>): Likewise.

2019-11-08  Hongtao Liu  <Hongtao.liu@intel.com>

	PR target/92295
	* config/i386/i386-expand.c (ix86_expand_vector_init_concat)
	Enhance ix86_expand_vector_init_concat.

2019-11-08  Joseph Myers  <joseph@codesourcery.com>

	* doc/invoke.texi (-Wold-style-definition): Document () not being
	considered an old-style definition for C2x.

2019-11-07  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.md (memory_barrier): Revise to use ldcw barriers.
	Enhance comment.
	(memory_barrier_coherent, memory_barrier_64, memory_barrier_32): New
	insn patterns using ldcw instruction.
	(memory_barrier): Remove insn pattern using sync instruction.
	* config/pa/pa.opt (coherent-ldcw): New option.
	(ordered): New option.

2019-11-07  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (validate_condition_mode): Don't assert for
	valid conditions.

2019-11-07  Jakub Jelinek  <jakub@redhat.com>

	* ipa-utils.c (ipa_merge_profiles): Fix fprintf format string
	typo - mistmatch -> mismatch.
	* ipa-profile.c (ipa_profile): Likewise.
	* ipa-devirt.c (compare_virtual_tables): Fix a comment typo
	- mistmatch -> mismatch.

2018-11-07  Segher Boessenkool  <segher@kernel.crashing.org>

	* simplify-rtx.c (comparison_to_mask): New function.
	(mask_to_comparison): New function.
	(simplify_logical_relational_operation): New function.
	(simplify_binary_operation_1): Call
	simplify_logical_relational_operation.

2019-11-07  Peter Bergner <bergner@linux.ibm.com>

	PR other/92090
	* config/rs6000/predicates.md (input_operand): Allow MODE_PARTIAL_INT
	modes for integer constants.

2019-11-07  Jan Hubicka  <jh@suse.cz>

	PR ipa/92406
	* ipa-fnsummary.c (analyze_function_body): Use get_create to copy
	summary.

2019-11-07  Jan Hubicka  <jh@suse.cz>

	* optc-save-gen.awk: Generate cl_target_option_free
	and cl_optimization_option_free.
	* opth-en.awk: Declare cl_target_option_free
	and cl_optimization_option_free.
	* tree.c (free_node): Use it.

2019-11-06  Jan Hubicka  <jh@suse.cz>

	* lto-streamer-in.c: Include alloc-pool.h.
	(freeing_string_slot_hasher): Remove.
	(string_slot_allocator): New object allocator.
	(file_name_hash_table): Turn to hash_table<string_slot_hasher>.
	(file_name_obstack): New obstack.
	(canon_file_name): Allocate in obstack and allocator.
	(lto_reader_init): Initialize obstack and allocator.
	(lto_free_file_name_hash): New function.
	* lto-streamer.h (lto_free_file_name_hash): New.

2019-11-07  Feng Xue  <fxue@os.amperecomputing.com>

	PR tree-optimization/89134
	* doc/invoke.texi (min-loop-cond-split-prob): Document new --params.
	* params.def: Add min-loop-cond-split-prob.
	* tree-ssa-loop-split.c (split_loop): Remove niter parameter, move some
	outside checks on loop into the function.
	(split_info): New class.
	(find_vdef_in_loop, get_control_equiv_head_block): New functions.
	(find_control_dep_blocks, vuse_semi_invariant_p): Likewise.
	(ssa_semi_invariant_p, loop_iter_phi_semi_invariant_p): Likewise.
	(control_dep_semi_invariant_p, stmt_semi_invariant_p_1): Likewise.
	(stmt_semi_invariant_p, branch_removable_p): Likewise.
	(get_cond_invariant_branch, compute_added_num_insns): Likewise.
	(get_cond_branch_to_split_loop, do_split_loop_on_cond): Likewise.
	(split_loop_on_cond): Likewise.
	(tree_ssa_split_loops): Add loop split on conditional statement.

2019-11-07  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.md ("*cstorecc<mode>_z13"): New insn_and_split
	pattern.

2019-11-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92405
	* tree-vect-loop.c (vectorizable_reduction): Appropriately
	restrict lane-reducing ops to single stmt chains.

2019-11-07  Martin Jambor  <mjambor@suse.cz>

	PR lto/70929
	* cif-code.def (MISMATCHED_ARGUMENTS): Removed.
	* cgraph.h (gimple_check_call_matching_types): Remove
	* cgraph.c (gimple_check_call_args): Likewise.
	(gimple_check_call_matching_types): Likewise.
	(symbol_table::create_edge): Do not call
	gimple_check_call_matching_types.
	(cgraph_edge::make_direct): Likewise.
	(cgraph_edge::redirect_call_stmt_to_callee): Likewise.
	* value-prof.h (check_ic_target): Remove.
	* value-prof.c (check_ic_target): Remove.
	(gimple_ic_transform): Do nat call check_ic_target.
	* auto-profile.c (function_instance::find_icall_target_map): Likewise.
	(afdo_indirect_call): Likewise.
	* ipa-prop.c (update_indirect_edges_after_inlining): Do not call
	gimple_check_call_matching_types.
	* ipa-inline.c (early_inliner): Likewise.

2019-11-07  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm.md (arm_<simd32_op>): New define_expand.
	(arm_<simd32_op><add_clobber_q_name>_insn): New define_insn.
	* config/arm/arm_acle.h (__ssat16, __usat16): Define.
	* config/arm/arm_acle_builtins.def: Define builtins for the above.
	* config/arm/iterators.md (USSAT16): New int_iterator.
	(simd32_op): Handle UNSPEC_SSAT16, UNSPEC_USAT16.
	(sup): Likewise.
	* config/arm/predicates.md (ssat16_imm): New predicate.
	(usat16_imm): Likewise.
	* config/arm/unspecs.md (UNSPEC_SSAT16, UNSPEC_USAT16): Define.

2019-11-07  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm.md (arm_<simd32_op><add_clobber_q_name>_insn):
	New define_insns.
	(arm_<simd32_op>): New define_expands.
	* config/arm/arm_acle.h (__smlad, __smladx, __smlsd, __smlsdx,
	__smuad, __smuadx): Define.
	* config/arm/arm_acle_builtins.def: Define builtins for the above.
	* config/arm/iterators.md (SIMD32_TERNOP_Q): New int_iterator.
	(SIMD32_BINOP_Q): Likewise.
	(simd32_op): Handle the above.
	* config/arm/unspecs.md: Define unspecs for the above.

2019-11-07  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/aout.h (REGISTER_NAMES): Add apsrge.
	* config/arm/arm.md (APSRGE_REGNUM): Define.
	(arm_<simd32_op>): New define_insn.
	(arm_sel): Likewise.
	* config/arm/arm.h (FIXED_REGISTERS): Add entry for apsrge.
	(CALL_USED_REGISTERS): Likewise.
	(REG_ALLOC_ORDER): Likewise.
	(FIRST_PSEUDO_REGISTER): Update value.
	(ARM_GE_BITS_READ): Define.
	* config/arm/arm.c (arm_conditional_register_usage): Clear
	APSRGE_REGNUM from operand_reg_set.
	(arm_ge_bits_access): Define.
	* config/arm/arm-builtins.c (arm_check_builtin_call): Handle
	ARM_BUIILTIN_sel.
	* config/arm/arm-protos.h (arm_ge_bits_access): Declare prototype.
	* config/arm/arm-fixed.md (add<mode>3): Convert to define_expand.
	FAIL if ARM_GE_BITS_READ.
	(*arm_add<mode>3): New define_insn.
	(sub<mode>3): Convert to define_expand.  FAIL if ARM_GE_BITS_READ.
	(*arm_sub<mode>3): New define_insn.
	* config/arm/arm_acle.h (__sel, __sadd8, __ssub8, __uadd8, __usub8,
	__sadd16, __sasx, __ssax, __ssub16, __uadd16, __uasx, __usax,
	__usub16): Define.
	* config/arm/arm_acle_builtins.def: Define builtins for the above.
	* config/arm/iterators.md (SIMD32_GE): New int_iterator.
	(simd32_op): Handle the above.
	* config/arm/unspecs.md (UNSPEC_GE_SET): Define.
	(UNSPEC_SEL, UNSPEC_SADD8, UNSPEC_SSUB8, UNSPEC_UADD8, UNSPEC_USUB8,
	UNSPEC_SADD16, UNSPEC_SASX, UNSPEC_SSAX, UNSPEC_SSUB16, UNSPEC_UADD16,
	UNSPEC_UASX, UNSPEC_USAX, UNSPEC_USUB16): Define.

2019-11-07  Kyrylo Tkachov <kyrylo.tkachov@arm.com>

	* config/arm/arm.md (arm_smlabb_setq): New define_insn.
	(arm_smlabb): New define_expand.
	(*maddhisi4tb): Rename to...
	(maddhisi4tb): ... This.
	(*maddhisi4tt): Rename to...
	(maddhisi4tt): ... This.
	(arm_smlatb_setq): New define_insn.
	(arm_smlatb): New define_expand.
	(arm_smlatt_setq): New define_insn.
	(arm_smlatt): New define_expand.
	(arm_<smlaw_op><add_clobber_name>_insn): New define_insn.
	(arm_<smlaw_op>): New define_expand.
	* config/arm/arm_acle.h (__smlabb, __smlatb, __smlabt, __smlatt,
	__smlawb, __smlawt): Define.
	* config/arm_acle_builtins.def: Define builtins for the above.
	* config/arm/iterators.md (SMLAWBT): New int_iterator.
	(slaw_op): New int_attribute.
	* config/arm/unspecs.md (UNSPEC_SMLAWB, UNSPEC_SMLAWT): Define.

2019-11-07  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm.md (arm_<ss_op>): New define_expand.
	(arm_<ss_op><add_clobber_q_name>_insn): New define_insn.
	* config/arm/arm_acle.h (__qadd, __qsub, __qdbl): Define.
	* config/arm/arm_acle_builtins.def: Add builtins for qadd, qsub.
	* config/arm/iterators.md (SSPLUSMINUS): New code iterator.
	(ss_op): New code_attr.

2019-11-07  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/aout.h (REGISTER_NAMES): Add apsrq.
	* config/arm/arm.md (APSRQ_REGNUM): Define.
	(add_setq): New define_subst.
	(add_clobber_q_name): New define_subst_attr.
	(add_clobber_q_pred): Likewise.
	(maddhisi4): Change to define_expand.  Split into mult and add if
	ARM_Q_BIT_READ.
	(arm_maddhisi4): New define_insn.
	(*maddhisi4tb): Disable for ARM_Q_BIT_READ.
	(*maddhisi4tt): Likewise.
	(arm_ssat): New define_expand.
	(arm_usat): Likewise.
	(arm_get_apsr): New define_insn.
	(arm_set_apsr): Likewise.
	(arm_saturation_occurred): New define_expand.
	(arm_set_saturation): Likewise.
	(*satsi_<SAT:code>): Rename to...
	(satsi_<SAT:code><add_clobber_q_name>): ... This.
	(*satsi_<SAT:code>_shift): Disable for ARM_Q_BIT_READ.
	* config/arm/arm.h (FIXED_REGISTERS): Mark apsrq as fixed.
	(CALL_USED_REGISTERS): Mark apsrq.
	(FIRST_PSEUDO_REGISTER): Update value.
	(REG_ALLOC_ORDER): Add APSRQ_REGNUM.
	(machine_function): Add q_bit_access.
	(ARM_Q_BIT_READ): Define.
	* config/arm/arm.c (TARGET_CHECK_BUILTIN_CALL): Define.
	(arm_conditional_register_usage): Clear APSRQ_REGNUM from
	operand_reg_set.
	(arm_q_bit_access): Define.
	* config/arm/arm-builtins.c: Include stringpool.h.
	(arm_sat_binop_imm_qualifiers,
	arm_unsigned_sat_binop_unsigned_imm_qualifiers,
	arm_sat_occurred_qualifiers, arm_set_sat_qualifiers): Define.
	(SAT_BINOP_UNSIGNED_IMM_QUALIFIERS,
	UNSIGNED_SAT_BINOP_UNSIGNED_IMM_QUALIFIERS, SAT_OCCURRED_QUALIFIERS,
	SET_SAT_QUALIFIERS): Likewise.
	(arm_builtins): Define ARM_BUILTIN_SAT_IMM_CHECK.
	(arm_init_acle_builtins): Initialize __builtin_sat_imm_check.
	Handle 0 argument expander.
	(arm_expand_acle_builtin): Handle ARM_BUILTIN_SAT_IMM_CHECK.
	(arm_check_builtin_call): Define.
	* config/arm/arm.md (ssmulsa3, usmulusa3, usmuluha3,
	arm_ssatsihi_shift, arm_usatsihi): Disable when ARM_Q_BIT_READ.
	* config/arm/arm-protos.h (arm_check_builtin_call): Declare prototype.
	(arm_q_bit_access): Likewise.
	* config/arm/arm_acle.h (__ssat, __usat, __ignore_saturation,
	__saturation_occurred, __set_saturation_occurred): Define.
	* config/arm/arm_acle_builtins.def: Define builtins for ssat, usat,
	saturation_occurred, set_saturation_occurred.
	* config/arm/unspecs.md (UNSPEC_Q_SET): Define.
	(UNSPEC_APSR_READ): Likewise.
	(VUNSPEC_APSR_WRITE): Likewise.
	* config/arm/arm-fixed.md (ssadd<mode>3): Convert to define_expand.
	(*arm_ssadd<mode>3): New define_insn.
	(sssub<mode>3): Convert to define_expand.
	(*arm_sssub<mode>3): New define_insn.
	(ssmulsa3): Convert to define_expand.
	(*arm_ssmulsa3): New define_insn.
	(usmulusa3): Convert to define_expand.
	(*arm_usmulusa3): New define_insn.
	(ssmulha3): FAIL if ARM_Q_BIT_READ.
	(arm_ssatsihi_shift, arm_usatsihi): Disable for ARM_Q_BIT_READ.
	* config/arm/iterators.md (qaddsub_clob_q): New mode attribute.

2019-11-07  Martin Liska  <mliska@suse.cz>

	PR c++/92354
	* cgraph.c (delete_function_version): Clear global
	variable version_info_node if equal to deleted
	function.

2019-11-07  Martin Liska  <mliska@suse.cz>

	* fold-const.c (operand_compare::operand_equal_p): Add comparison
	of CONSTRUCTOR_NO_CLEARING.
	(operand_compare::hash_operand): Likewise.

2019-11-07  Georg-Johann Lay  <avr@gjlay.de>

	Support 64-bit double and 64-bit long double configurations.

	PR target/92055
	* config.gcc (tm_defines) [avr]: Set from --with-double=,
	--with-long-double=.
	* config/avr/t-multilib: Remove.
	* config/avr/t-avr: Output of genmultilib.awk is now fully
	dynamically generated and no more part of the repo.
	(HAVE_DOUBLE_MULTILIB, HAVE_LONG_DOUBLE_MULTILIB): New variables.
	Pass them down to...
	* config/avr/genmultilib.awk: ...here and handle them.
	* config/avr/avr.opt (-mdouble=, avr_double). New option and var.
	(-mlong-double=, avr_long_double). New option and var.
	* common/config/avr/avr-common.c (opts.h, diagnostic.h): Include.
	(TARGET_OPTION_OPTIMIZATION_TABLE) <-mdouble=, -mlong-double=>:
	Set default as requested by --with-double=
	(TARGET_HANDLE_OPTION): Define to this...
	(avr_handle_option): ...new hook worker.
	* config/avr/avr.h (DOUBLE_TYPE_SIZE): Define to avr_double.
	(LONG_DOUBLE_TYPE_SIZE): Define to avr_long_double.
	(avr_double_lib): New proto for spec function.
	(EXTRA_SPEC_FUNCTIONS) <double-lib>: Add.
	(DRIVER_SELF_SPECS): Call %:double-lib.
	* config/avr/avr.c (avr_option_override): Assert
	sizeof(long double) >= sizeof(double) for the target.
	* config/avr/avr-c.c (avr_cpu_cpp_builtins)
	[__HAVE_DOUBLE_MULTILIB__, __HAVE_LONG_DOUBLE_MULTILIB__]
	[__HAVE_DOUBLE64__, __HAVE_DOUBLE32__, __DEFAULT_DOUBLE__=]
	[__HAVE_LONG_DOUBLE64__, __HAVE_LONG_DOUBLE32__]
	[__HAVE_LONG_DOUBLE_IS_DOUBLE__, __DEFAULT_LONG_DOUBLE__=]:
	New built-in define depending on --with-double=, --with-long-double=.
	* config/avr/driver-avr.c (avr_double_lib): New spec function.
	* doc/invoke.tex (AVR Options) <-mdouble=,-mlong-double=>: Doc.
	* doc/install.texi (Cross-Compiler-Specific Options)
	<--with-double=, --with-long-double=>: Doc.

2019-11-07  Richard Biener  <rguenther@suse.de>

	* dbgcnt.def (gimple_unroll): New.
	* tree-ssa-loop-ivcanon.c (try_unroll_loop_completely): Check
	gimple_unroll debug counter before applying transform.
	(try_peel_loop): Likewise.

2019-11-07  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* ira.c (setup_alloc_regs): Setup no_unit_alloc_regs for
	frame pointer in multiple registers.
	(ira_setup_eliminable_regset): Setup eliminable_regset,
	ira_no_alloc_regs and regs_ever_live for frame pointer in
	multiple registers.

2019-11-06  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/vsx.md (xxswapd_<mode>): Add support for V2DF and
	V2DI modes.

2019-11-06  Jan Hubicka  <jh@suse.cz>

	* ggc-common.c (ggc_prune_overhead_list): Do not delete surviving
	allocations.
	* mem-stats.h (mem_alloc_description<T>::release_object_overhead):
	Do not silently ignore summary corruptions.

2019-11-06  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_analyze_loop): Only try to vectorize
	the epilogue if there are peeled iterations for it to handle.

2019-11-06  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_split_ior): Add asserts.
	(arc_split_mov_const): Likewise.
	(arc_check_ior_const): Do not match known short immediate values.
	* config/arc/arc.md (movsi): Don't split predicated instructions
	(iorsi): Likewise.

2019-11-06  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.opt (mea): Update help string.
	* doc/invoke.texi(ARC): Update mea option info.

2019-11-06  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (zero_extendqihi2_i): Cleanup pattern.
	(zero_extendqisi2_ac): Likewise.
	(zero_extendhisi2_i): Likewise.
	(extendqihi2_i): Likewise.
	(extendqisi2_ac): Likewise.
	(extendhisi2_i): Likewise.

2019-11-06  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vectorizable_reduction): Remember reduction
	PHI.  Use STMT_VINFO_REDUC_IDX to skip the reduction operand.
	Simplify single_defuse_cycle condition.

2019-11-06  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_analyze_loop_2): When vectorizing an
	epilogue loop, make sure that the VF is small enough or that
	the epilogue loop can be fully-masked.

2019-11-06  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_analyze_loop): Break out of the main
	loop when we've finished, rather than returning directly from
	the loop.  Use a local variable to track whether we're still
	searching for the preferred simdlen.  Make vect_epilogues
	record whether the next iteration should try to treat the
	loop as an epilogue.

2019-11-06  Vineet Gupta  <vgupta@synopsys.com>

	* config/arc/arc-c.c (arc_cpu_cpp_builtins) : Add
	__arc_hard_float__, __ARC_HARD_FLOAT__,
	__arc_soft_float__, __ARC_SOFT_FLOAT__

2019-11-06  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR tree-optimization/92317
	* tree-vect-loop-manip.c (slpeel_update_phi_nodes_for_guard2): Also
	update phi's with constant phi arguments.

2019-11-06  Eric Botcazou  <ebotcazou@adacore.com>
	    Alexandre Oliva  <oliva@adacore.com>

	* common.opt (-fcallgraph-info[=]): New option.
	* doc/invoke.texi (Developer options): Document it.
	* opts.c (common_handle_option): Handle it.
	* builtins.c (expand_builtin_alloca): Record allocation if
	-fcallgraph-info=da.
	* calls.c (expand_call): If -fcallgraph-info, record the call.
	(emit_library_call_value_1): Likewise.
	* flag-types.h (enum callgraph_info_type): New type.
	* explow.c: Include stringpool.h.
	(set_stack_check_libfunc): Set SET_SYMBOL_REF_DECL on the symbol.
	* function.c (allocate_stack_usage_info): New.
	(allocate_struct_function): Call it for -fcallgraph-info.
	(prepare_function_start): Call it otherwise.
	(record_final_call, record_dynamic_alloc): New.
	* function.h (struct callinfo_callee): New.
	(CALLEE_FROM_CGRAPH_P): New.
	(struct callinfo_dalloc): New.
	(struct stack_usage): Add callees and dallocs.
	(record_final_call, record_dynamic_alloc): Declare.
	* gimplify.c (gimplify_decl_expr): Record dynamically-allocated
	object if -fcallgraph-info=da.
	* optabs-libfuncs.c (build_libfunc_function): Keep SYMBOL_REF_DECL.
	* print-tree.h (print_decl_identifier): Declare.
	(PRINT_DECL_ORIGIN, PRINT_DECL_NAME, PRINT_DECL_UNIQUE_NAME): New.
	* print-tree.c: Include print-tree.h.
	(print_decl_identifier): New function.
	* toplev.c: Include print-tree.h.
	(callgraph_info_file): New global variable.
	(callgraph_info_external_printed): Likewise.
	(output_stack_usage): Rename to...
	(output_stack_usage_1): ... this.  Make it static, add cf
	parameter.  If -fcallgraph-info=su, print stack usage to cf.
	If -fstack-usage, use print_decl_identifier for
	pretty-printing.
	(INDIRECT_CALL_NAME): New.
	(dump_final_node_vcg_start): New.
	(dump_final_callee_vcg, dump_final_node_vcg): New.
	(output_stack_usage): New.
	(lang_dependent_init): Open and start file if
	-fcallgraph-info.  Allocated callgraph_info_external_printed.
	(finalize): If callgraph_info_file is not null, finish it,
	close it, and release callgraph_info_external_printed.

2019-11-06  Gergö Barany  <gergo@codesourcery.com>
	    Frederik Harwath  <frederik@codesourcery.com>
	    Thomas Schwinge  <thomas@codesourcery.com>

	* omp-low.c (struct omp_context): New fields
	local_reduction_clauses, outer_reduction_clauses.
	(new_omp_context): Initialize these.
	(scan_sharing_clauses): Record reduction clauses on OpenACC constructs.
	(scan_omp_for): Check reduction clauses for incorrect nesting.

2019-11-06  Jakub Jelinek  <jakub@redhat.com>

	PR inline-asm/92352
	* gimplify.c (gimplify_asm_expr): Reject VLA in output or input
	operands with non-memory constraints.

2019-11-05  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/92373
	* tree.c (component_ref_size): Only consider initializers of objects
	of matching struct types.
	Return null for instances of interior zero-length arrays.

2019-11-05  Segher Boessenkool  <segher@kernel.crashing.org>

	* doc/md.texi (Insn Splitting): Fix combiner documentation.

2019-11-05  Jason Merrill  <jason@redhat.com>

	PR tree-optimization/91825
	* expmed.c: Reduce -Wmaybe-uninitialized to warning.

2019-11-05  Jim Wilson  <jimw@sifive.com>

	PR middle-end/92263
	* expr.c (emit_move_complex): Only use BLOCK_OP_NO_LIBCALL when
	optimize_insn_for_speed_p is true.

2019-11-05  Martin Sebor  <msebor@redhat.com>

	PR middle-end/92333
	PR middle-end/82608
	* tree-vrp.c (vrp_prop::check_array_ref): Handle VLAs with constant
	size.
	* tree-ssa-ccp.c (fold_builtin_alloca_with_align): Use a meaninful
	name and location for a temporary variable.

2019-11-05  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (value_range::value_range): Fix whitespace.
	(defined_ranges_p): Same.
	(range_fold_binary_symbolics_p): Same.
	(value_range::intersect_helper): Same.
	(value_range::union_helper): Same.
	* tree-vrp.h (range_fold_binary_expr): Same.

2019-11-04  Martin Sebor  <msebor@redhat.com>

	PR middle-end/92341
	PR middle-end/82612
	* tree-sra.c (get_access_for_expr): Fail for out-of-bounds offsets.
	* tree-vrp.c (vrp_prop::check_array_ref): Correct index and text
	of message printed in a warning for empty arrays.
	(vrp_prop::check_mem_ref): Also handle function parameters and
	empty arrays.

2019-11-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92371
	* tree-vect-loop.c (vectorizable_reduction): Set STMT_VINFO_REDUC_DEF
	on the original stmt of live stmts in the chain.
	(vectorizable_live_operation): Look at the original stmt when
	checking STMT_VINFO_REDUC_DEF.

2019-11-05  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-fold.c, gimple-loop-versioning.cc,
	gimple-ssa-evrp-analyze.[ch], gimple-ssa-evrp.c,
	gimple-ssa-sprintf.c, ipa-cp.c, ipa-prop.c, ipa-prop.h,
	range-op.[hc]*, range.[hc]*, selftest.h, tree-ssa-dom.c,
	tree-ssa-strlen.c, tree-ssa-threadedge.c, tree-ssanames.[hc],
	tree-vrp.[hc], vr-values.[hc]: Global rename of value_range to
	value_range_equiv, and value_range_base to value_range.

2019-11-05  Matthew Malcomson  <matthew.malcomson@arm.com>

	* expr.c (build_personality_function): Fix generated type to
	match actual personality functions.

2019-11-05  Matthew Malcomson  <matthew.malcomson@arm.com>

	* config/aarch64/aarch64.c (aarch64_handle_attr_cpu): Allocate
	enough bytes for the NULL character.

2019-11-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92280
	* match.pd (BIT_FIELD_REF of CTOR): Unless the original CTOR
	had a single use do not create a new CTOR.
	* tree-ssa-forwprop.c (simplify_bitfield_ref): Do not re-fold
	BIT_FIELD_REF of a CTOR via GENERIC.

2019-11-05  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_vector_alignment): Check if the value
	fits into uhwi before using it.

2019-11-05  Martin Liska  <mliska@suse.cz>

	* symbol-summary.h: Use ggc_delete.

2019-11-05  Anton Youdkevitch  <anton.youdkevitch@bell-sw.com>

	* config/aarch64/aarch64.c (thunderx2t99_vector_cost):
	Change vec_perm field to 10.

2019-11-05  Arnaud Charlet  <charlet@adacore.com>

	* doc/install.texi: Further fix syntax for html generation.

2019-11-05  Martin Liska  <mliska@suse.cz>

	* symbol-summary.h: Rename allocator to m_allocator and
	add comment.

2019-11-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92324
	* tree-vect-loop.c (check_reduction_path): For MIN/MAX require
	all signed or unsigned operations.

2019-11-05  Jan Hubicka  <jh@suse.cz>

	* hsa-brig.c: Include alloc-pool.h
	* hsa-dump.c: Likewise.
	* hsa-gen.c: Likewise.
	* hse-regalloc.c: Likewise.
	* ipa-hsa.c: Likewise.
	* ipa-predicate.c: Likewise.
	* ipa-reference.c: Likewise.
	* ipa-sra.c: Likewise.
	* omp-expand.c: Likewise.
	* omp-general.c: Likewise.
	* omp-low.c: Likewise.
	* sumbol-summary.h (function_summary_base): Add allocator.
	(function_summary<T *>::function_summary): Update construction.
	(fast_function_summary<T *, V>::fast_function_summary): Likewise.
	(call_summary_base): Add allcator.
	(call_summary<T *>::call_summary): Update construction.
	(fast_call_summary<T *, V>::fast_call_summary): Likewise.

2019-11-05  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91945
	* builtins.c (compute_objsize): For ARRAY_REF, only multiply off
	by tpsize if it is both non-NULL and INTEGER_CST, otherwise punt.
	Formatting fix.

2019-11-05  Aldy Hernandez  <aldyh@redhat.com>

	* range-op.cc (wi_set_zero_nonzero_bits): Remove static qualifier.
	* range-op.h (wi_set_zero_nonzero_bits): New prototype.
	* tree-vrp.h (vrp_set_zero_nonzero_bits): Remove.
	* tree-vrp.c (wide_int_range_set_zero_nonzero_bits): Remove.
	(vrp_set_zero_nonzero_bits): Move to...
	* vr-values.c (vr_set_zero_nonzero_bits): ...here.
	(vr_values::simplify_bit_ops_using_ranges): Rename
	vrp_set_zero_nonzero_bits to vr_set_zero_nonzero_bits.

2019-11-05  Martin Liska  <mliska@suse.cz>

	PR c++/92339
	* fold-const.c (operand_compare::hash_operand): Remove
	FIELD_DECL handling.

2019-11-05  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.h (vrp_bitmap_equal_p): Remove.
	* tree-vrp.c (vrp_bitmap_equal_p): Move before use and make
	static.

2019-11-05  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (value_range_base::operator==): Use equal_p to
	properly handle symbolics.
	(range_compatible_p): Remove.

2019-11-04  Kamlesh Kumar  <kamleshbhalui@gmail.com>

	* common.opt (-fabi-version): Document =14.
	* doc/invoke.texi (C++ Dialect Options): Likewise.

2019-11-04  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (value_range_base::set): Do not special case pointers.

2019-11-04  Tobias Burnus  <tobias@codesourcery.com>

	* config/gcn/gcn.c (gcn_omp_device_kind_arch_isa): New function.
	(TARGET_OMP_DEVICE_KIND_ARCH_ISA): Redefine to
	gcn_omp_device_kind_arch_isa.
	* config/gcn/t-omp-device: New file.
	* configure.ac: Support gcn for omp_device_property.
	* configure: Regenerate.

2019-11-04  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.h (vrp_val_min): Remove handle_pointers argument.
	(vrp_val_max): Same.
	(vrp_val_is_min): Same.
	(vrp_val_is_max): Same.
	(value_range_base::nonzero_p): Remove last argument to
	vrp_val_is_max.
	* tree-vrp.c (vrp_val_min): Remove handle_pointers argument.
	(vrp_val_max): Same.
	(vrp_val_is_min): Same.
	(vrp_val_is_max): Same.
	(value_range_base::set_varying): Remove last argument to vrp_val*.
	(value_range_base::dump): Same.
	(value_range_base::set): Same.
	(value_range_base::normalize_symbolics): Same.
	(value_range_base::num_pairs): Same.
	(value_range_base::lower_bound): Same.
	(value_range_base::upper_bound): Same.
	(ranges_from_anti_range): Remove handle_pointers argument.
	(value_range_base::singleton_p): Remove last argument to
	ranges_from_anti_range.

2019-11-04  Jan Hubicka  <jh@suse.cz>

	* ipa-reference.c (init_function_info): Initialize
	info->global.statics_read.

2019-11-04  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (value_range_base::invert): Use constructors to build
	range.

2019-11-04  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (range_int_cst_singleton_p): Remove.
	* tree-vrp.h (range_int_cst_singleton_p): Remove.

2019-11-04  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (value_range_base::normalize_addresses): Handle
	VR_UNDEFINED.

2019-11-04  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (dump_assert_info): New.
	(dump_asserts_info): New.

2019-11-04  Jan Hubicka  <jh@suse.cz>

	* ipa-inline-transform.c: Include ipa-utils.h
	(inline_call): Set thunk_expansion flag.
	* ipa-utils.h (thunk_expansion): Declare.
	* ipa-devirt.c (thunk_expansion): New global var.
	(devirt_node_removal_hook): Do not invalidate cache while
	doing thunk expansion.

2019-11-04  Tamar Christina  <tamar.christina@arm.com>

	* tree-vect-slp.c (vectorize_slp_instance_root_stmt): Initialize rstmt.

2019-11-04  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/92349
	* tree-vrp.c (vrp_prop::check_array_ref): Avoid assuming struct
	memebers have constant sizes.

2019-11-04  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* tree-vect-loop.c (vect_analyze_loop): Remove orig_loop_vinfo
	parameter.
	* tree-vectorizer.h (vect_analyze_loop): Update declaration.
	* tree-vectorizer.c (try_vectorize_loop_1): Update calls to
	vect_analyze_loop.

2019-11-04  Joel Hutton  <Joel.Hutton@arm.com>

	* expr.c (store_constructor): Modify to handle single element vectors.
	* tree-vect-slp.c (vect_analyze_slp_instance): Add case for vector
	constructors.
	(vect_slp_check_for_constructors): New function.
	(vect_slp_analyze_bb_1): Call new function to check for vector
	constructors.
	(vectorize_slp_instance_root_stmt): New function.
	(vect_schedule_slp): Call new function to vectorize root stmt of vector
	constructors.
	* tree-vectorizer.h (SLP_INSTANCE_ROOT_STMT): New field.

2019-11-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92345
	* tree-vect-loop.c (vect_is_simple_reduction): Return whether
	we produced a reduction chain.
	(vect_analyze_scalar_cycles_1): Do not add reduction chains to
	LOOP_VINFO_REDUCTIONS.

2019-11-04  Jan Hubicka  <jh@suse.cz>

	* cgraphclones.c (cgraph_node::create_version_clone): Do not
	duplicate summaries.
	* ipa-fnsummary.c (ipa_fn_summary_alloc): Allocate size summary
	first.
	(ipa_fn_summary_t::duplicate): Use get instead of get_create to
	access call summaries.
	(dump_ipa_call_summary): Be ready for missing edge summaries.
	(analyze_function_body): Use get instead of get_create to access
	edge summary.
	(estimate_calls_size_and_time): Do not access summaries of
	inlined edges; sanity check they are missing.
	(ipa_call_context::estimate_size_and_time): Use get instead
	of get_create to access node summary.
	(inline_update_callee_summaries): Do not update depth of
	inlined edge.
	(ipa_merge_fn_summary_after_inlining): Remove inline edge from
	growth caches.
	(ipa_merge_fn_summary_after_inlining): Use get instead
	of get_create.
	* ipa-fnsummary.h (ipa_remove_from_growth_caches): Declare.
	* ipa-inline-analyssi.c (edge_growth_cache): Turn to
	fast summary.
	(initialize_growth_caches): Update.
	(do_estimate_edge_time): Remove redundant copy of context.
	(ipa_remove_from_growth_caches): New function.
	* ipa-inline.c (flatten_function): Update overall summary
	only when optimizing.
	(inline_to_all_callers): Update overall summary of function
	inlined to.
	* ipa-inline.h (edge_growth_cache): Turn to fast summary.
	* symbol-summary.h (call_summary_base): Set m_initialize_when_cloning
	to false.

2019-11-04  Richard Biener  <rguenther@suse.de>

	* system.h: Include malloc.h if INCLUDE_MALLOC_H and HAVE_MALLINFO.
	* ggc-common.c: Remove inclusion of malloc.h, define INCLUDE_MALLOC_H.

2019-11-04  David Edelsohn  <dje.gcc@gmail.com>

	* ggc-common.c: Include system.h before malloc.h.

2019-11-04  Alexandre Oliva <oliva@adacore.com>

	* configure.ac: Pass --enable-obsolete=* and
	--enable-option-checking=* down to build configure, and fail
	if it fails.  AC_SUBST HAVE_AUTO_BUILD.
	* configure: Rebuild.
	* Makefile.in [HAVE_AUTO_BUILD] (auto-build.h): New rule.
	[HAVE_AUTO_BUILD] (config.status): Depend on auto-build.h.

2019-11-04  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config.in: Regenerate.
	* config/msp430/msp430.c (msp430_option_override): Emit an error if
	-mtiny-printf is used without GCC being configured with
	--enable-newlib-nano-formatted-io.
	* config/msp430/msp430.h (LINK_SPEC): Pass 
	"--wrap puts --wrap printf" when -mtiny-printf is used.
	* config/msp430/msp430.opt: Document -mtiny-printf.
	* configure: Regenerate.
	* configure.ac: Enable --enable-newlib-nano-formatted-io flag.
	Define HAVE_NEWLIB_NANO_FORMATTED_IO if
	--enable-newlib-nano-formatted-io is passed.
	* doc/invoke.texi: Document -mtiny-printf.

2019-11-04  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* configure: Regenerate.

2019-11-04  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/driver-msp430.c
	(msp430_get_linker_devices_include_path): New spec function.
	* config/msp430/msp430-devices.c (msp430_dirname): New function.
	(extract_devices_dir_from_exec_prefix): New function.
	(extract_devices_dir_from_collect_gcc): New function.
	(msp430_check_env_var_for_devices): New function.
	(msp430_check_path_for_devices): Use xstrdup instead of ASTRDUP.
	(parse_devices_csv): Call msp430_check_env_var_for_devices if
	devices.csv was not found using other methods.
	* config/msp430/msp430-devices.h (msp430_check_env_var_for_devices):
	New prototype.
	(msp430_dirname): Likewise.
	* config/msp430/msp430.c (msp430_register_pre_includes): New function.
	* config/msp430/msp430.h (EXTRA_SPEC_FUNCTIONS): Add
	msp430_get_linker_devices_include_path.
	(TARGET_EXTRA_PRE_INCLUDES): Define.
	* doc/invoke.texi: Document new ways of searching for support files.

2019-11-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92301
	* tree-vect-stmts.c (process_use): Force reduction PHI defs live
	as required by epilogue generation

2019-11-04  Martin Liska  <mliska@suse.cz>

	PR ipa/92304
	* fold-const.c (operand_compare::hash_operand): Fix field
	hashing of CONSTRUCTOR.

2019-11-04  Martin Liska  <mliska@suse.cz>

	* ggc.h (ggc_delete): New function.
	* ipa-fnsummary.c (ipa_free_fn_summary): Use it.
	* ipa-prop.c (ipa_free_all_edge_args): Likewise.
	(ipa_free_all_node_params): Likewise.
	* ipa-sra.c (ipa_sra_analysis): Likewise.

2019-11-02  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (set_cond_stmt_execution_predicate,
	set_switch_stmt_execution_predicate, compute_bb_predicates,
	will_be_nonconstant_expr_predicate,
	phi_result_unknown_predicate,
	analyze_function_body): Pass arround params summary.
	(ipa_call_context::duplicate_from): New comment;
	only duplicate useful values.
	(ipa_call_context::equal_to): Only compare useful values.
	(remap_edge_summaries): Pass params_summary.
	(remap_hint_predicate): Likewise.
	(ipa_merge_fn_summary_after_inlining): Likewise.
	(inline_read_section): Initialize params summary used flags.
	* ipa-predicate.c (predicate::remap_after_inlining): Pass
	around param_summary.
	(add_condition): Initialized used params summary flags.
	* ipa-predicate.h (inline_param_summary::equals_to): Make const.
	(inline_param_summary::useless_p): New predicate.
	(remap_after_inlining, add_condition): Update prototype
	* ipa-prop.c (ipa_populate_param_decls): Watch overflow in
	move_cost.
	(ipa_note_param_call): Add parameter POLYMORPHIC; update params
	summaries.
	(ipa_analyze_indirect_call_uses): Update use of ipa_note_param_call.
	(ipa_analyze_virtual_call_uses): Likewise.
	(update_indirect_edges_after_inlining): Update param summaries.
	(ipa_print_node_params): Print used flags.
	(ipa_read_indirect_edge_info): Update param summareis.
	* ipa-prop.h (ipa_param_descriptor): Add
	used_by_ipa_predicates, used_by_indirect_call
	and used_by_polymorphic_call.
	(ipa_set_param_used_by_ipa_predicates,
	ipa_set_param_used_by_indirect_call,
	ipa_set_param_used_by_polymorphic_call,
	ipa_is_param_used_by_ipa_predicates,
	ipa_is_param_used_by_indirect_call,
	ipa_is_param_used_by_polymorphic_call): New inline functions.

2019-11-02  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (ipa_call_context::duplicate_from): New
	member function.
	(ipa_call_context::release): Add ALL parameter.
	(ipa_call_context::equal_to): New member function.
	* ipa-fnsummary.h (ipa_call_context): Add empty constructor;
	duplicate_form, release, equal_to and exists_p member functoins.
	* ipa-inline-analysis.c (node_context_cache_entry): New
	class.
	(node_context_summary): Likewise.
	(node_context_cache, node_context_cache_hit, node_context_cache_miss,
	node_context_clear): New static vars.
	(initialize_growth_caches): New function.
	(free_growth_caches): Also delete node_context_cache; output stats.
	(do_estimate_edge_time): Cache contexts.
	(reset_node_cache): New function.
	* ipa-inline.c (reset_edge_caches): Reset also node cache.
	(inline_small_functions): Initialize growth caches.
	* ipa-inline.h (reset_node_cache, initialize_growth_caches):
	Declare.
	* ipa-predicate.h (inline_param_summary::equal_to): New.
	* ipa-prop.c (ipa_agg_jf_item::equal_to): New.
	* ipa-prop.h (ipa_agg_jf_item): Declare equal_to member function.
	(ipa_agg_jump_function): Implement equal_to member function.

2019-11-02  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (inline_read_section): Set vector size
	ahead of time.

2019-11-02  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (ipa_call_context): New constructor.
	(estimate_node_size_and_time): Turn to ...
	(ipa_call_context::estimate_size_and_time): ... this one.
	(ipa_call_context::release): New.
	* ipa-fnsummary.h (ipa_call_context): New class.
	(estimate_node_size_and_time): Remove.
	* ipa-inline-analysis.c (do_estimate_edge_time, do_estimate_edge_size,
	do_estimate_edge_hints): Update.

2019-11-02  Jan Hubicka  <hubicka@ucw.cz>

	* config.in: Regenerate.
	* configure: Regenerate.
	* configure.ac: Check for mallinfo.
	* ggc-common.c: Include malloc.h if available;
	include options.h
	(report_heap_memory_use): New functoin.
	* ggc-page.c (ggc_grow): Do not print "start".
	* ggc.h (report_heap_memory_use): Declare.
	* pases.c (execute_one_pass): Report memory after IPA passes.
	(ipa_read_summaries_1): Likewise.
	(ipa_read_optimization_summaries_1): Likewise.

2019-11-02  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.h (omp_construct_selector_matches): Change return
	type to int, add a new SCORES argument.
	* gimplify.c (omp_construct_selector_matches): Likewise.  If
	SCORES is non-NULL, compute scores of each construct.
	* omp-general.h (omp_get_context_selector): Declare.
	* omp-general.c (omp_maybe_offloaded, omp_context_selector_matches):
	Adjust omp_construct_selector_matches callers.
	(omp_get_context_selector): New function, moved from c-family/c-omp.c.
	(omp_context_compute_score): New function.
	(omp_resolve_declare_variant): Compute scores and decide based on
	that.

	PR bootstrap/92314
	* configure.ac: Don't look for omp-device-properties files from
	installed offloading compilers.  Instead add tmake_file snippets
	for configured offloading targets and use files they generate.
	* Makefile.in (install): Don't depend on
	install-omp-device-properties.
	(install-omp-device-properties): Remove goal.
	* config/i386/t-omp-device: New file.
	* config/i386/t-intelmic (omp-device-properties): Remove goal.
	* config/nvptx/t-omp-device: New file.
	* config/nvptx/t-nvptx (omp-device-properties): Remove goal.
	* configure: Regenerated.

	* omp-general.h (omp_context_selector_set_compare): Declare.
	* omp-general.c (omp_construct_simd_compare,
	omp_context_selector_props_compare, omp_context_selector_set_compare,
	omp_context_selector_compare): New functions.
	(omp_resolve_declare_variant): Prune variants that are strict subset
	of another variant.

2019-11-01  Martin Sebor  <msebor@redhat.com>

	PR middle-end/91679
	PR middle-end/91647
	PR middle-end/91463
	PR middle-end/92312
	* doc/invoke.texi (-Wzero-length-bounds): Document.
	* gimple-match-head.c (try_conditional_simplification): Use memcpy
	instead of a hand-rolled loop to avoid PR 92323.
	* tree-vrp.c (vrp_prop::check_array_ref): Handle trailing arrays
	with initializers.
	(vrp_prop::check_mem_ref): Handle declared struct objects.
	* tree.c (last_field): New function.
	(array_at_struct_end_p): Handle MEM_REF.
	(get_initializer_for): New helper.
	(component_ref_size): Add argument.  Rename locals.  Call
	get_initializer_for instead of fold_ctor_reference.  Correct handling
	of flexible array members.
	* wide-int.h (generic_wide_int <storage>::sign_mask): Assert invariant.

2019-11-01  Kewen Lin  <linkw@gcc.gnu.org>

	* config/rs6000/rs6000-modes.def (V2SF, V2SI): New modes.
	* config/rs6000/vsx.md (UNSPEC_VSX_CVSPSXDS,
	UNSPEC_VSX_CVSPUXDS): Remove.
	(vsx_xvcvspdp): New define_expand, old define_insn split to...
	(vsx_xvcvspdp_be): ... this.  New.  And...
	(vsx_xvcvspdp_le): ... this.  New.
	(vsx_xvcv<su>xwdp): New define_expand, old define_insn split to...
	(vsx_xvcv<su>xwdp_be): ... this.  New.  And...
	(vsx_xvcv<su>xwdp_le): ... this.  New.
	(vsx_xvcvsp<su>xds): New define_expand, old define_insn split to...
	(vsx_xvcvsp<su>xds_be): ... this.  New.  And...
	(vsx_xvcvsp<su>xds_le): ... this.  New.

2019-11-01  Kewen Lin  <linkw@gcc.gnu.org>

	* config/rs6000/vsx.md (UNSPEC_VSX_CVSXWSP, UNSPEC_VSX_CVUXWSP,
	UNSPEC_VSX_XVCVSXDDP, UNSPEC_VSX_XVCVUXDDP,
	UNSPEC_VSX_XVCVDPSXDS, UNSPEC_VSX_XVCVDPUXDS,
	UNSPEC_VSX_XVCVSPSXWS): Remove.
	(vsx_xvcv<su>xddp, vsx_xvcvdp<su>xds, vsx_xvcvsp<su>xws,
	vsx_xvcv<su>xwsp): Update define_insn RTL patterns.

2019-11-01  Kewen Lin  <linkw@gcc.gnu.org>

	* config/rs6000/vsx.md (vsx_xvcdpsp): Remove define_insn.
	(UNSPEC_VSX_XVCDPSP): Remove.
	* config/rs6000/rs6000.c (rs6000_generate_float2_double_code):
	Replace gen_vsx_xvcdpsp by gen_vsx_xvcvdpsp.

2019-11-01  Tobias Burnus  <tobias@codesourcery.com>

	* hooks.c (hook_tree_tree_bool_null): New.
	* hooks.h (hook_tree_tree_bool_null): Declare.
	* langhooks-def.h (LANG_HOOKS_OMP_ARRAY_DATA): Define.
	(LANG_HOOKS_DECLS): Add it.
	* langhooks.h (lang_hooks_for_decls): Add omp_array_data.
	* omp-low.c (install_var_field): New mode for Fortran descriptor arrays.
	(lower_omp_target): Handle Fortran array with descriptor in
	OMP_CLAUSE_USE_DEVICE_ADDR/OMP_CLAUSE_USE_DEVICE_PTR.

2019-10-31  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve-builtins.cc (register_builtin_types):
	Assert that the type we store in abi_vector_types is its own
	main variant.
	(svbool_type_p): Don't apply TYPE_MAIN_VARIANT here.

2019-10-31  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.c (arm_legitimize_address): Don't form negative offsets
	from a CONST_INT address when TARGET_THUMB2.

2019-10-31  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (add_not_cin): New insn.
	(add_not_shift_cin): Likewise.

2019-10-31  Martin Liska  <mliska@suse.cz>

	* ipa-icf-gimple.c (func_checker::compare_tree_ssa_label): Remove.
	* ipa-icf-gimple.h: Remove declaration from compare_tree_ssa_label
	and compare_memory_operand.

2019-10-31  Jakub Jelinek  <jakub@redhat.com>

	* configure.ac: Compute and substitute omp_device_properties and
	omp_device_property_deps.
	* Makefile.in (generated_files): Add omp-device-properties.h.
	(omp-general.o): Depend on omp-device-properties.h.
	(omp_device_properties): New make variable.
	(omp-device-properties.h, s-omp-device-properties-h,
	install-omp-device-properties): New goals.
	(install): Depend on install-omp-device-properties for accelerators.
	* target.def (TARGET_OMP_DEVICE_KIND_ARCH_ISA): New target hook.
	* target.h (enum omp_device_kind_arch_isa): New enum.
	* doc/tm.texi.in: Add placeholder for TARGET_OMP_DEVICE_KIND_ARCH_ISA
	documentation.
	* omp-general.c: Include omp-device-properties.h.
	(omp_max_simt_vf): Expect OFFLOAD_TARGET_NAMES to be separated by
	colon instead of comma.
	(omp_offload_device_kind_arch_isa, omp_maybe_offloaded): New
	functions.
	(omp_context_selector_matches): Implement device set arch/isa
	selectors, improve device set kind selector handling.
	* config/i386/i386-options.h (ix86_omp_device_kind_arch_isa): Declare.
	* config/i386/i386.c (TARGET_SIMD_CLONE_ADJUST,
	TARGET_SIMD_CLONE_USABLE): Formatting fix.
	(TARGET_OMP_DEVICE_KIND_ARCH_ISA): Redefine to
	ix86_omp_device_kind_arch_isa.
	* config/i386/i386-options.c (struct ix86_target_opts): Move type
	definition from ix86_target_string to file scope.
	(isa2_opts, isa_opts): Moved arrays from ix86_target_string function
	to file scope.
	(ix86_omp_device_kind_arch_isa): New function.
	(ix86_target_string): Moved struct ix86_target_opts, isa2_opts and
	isa_opts definitions to file scope.
	* config/i386/t-intelmic (omp-device-properties): New goal.
	* config/nvptx/t-nvptx (omp-device-properties): Likewise.
	* config/nvptx/nvptx.c (nvptx_omp_device_kind_arch_isa): New function.
	(TARGET_OMP_DEVICE_KIND_ARCH_ISA): Redefine to
	nvptx_omp_device_kind_arch_isa.
	* configure: Regenerate.
	* doc/tm.texi: Regenerate.

	PR middle-end/92231
	* tree.h (fndecl_built_in_p): Use fndecl_built_in_p instead of
	DECL_BUILT_IN in comment.  Remove redundant ()s around return
	argument.
	* tree.c (free_lang_data_in_decl): Check if var is FUNCTION_DECL
	before calling fndecl_built_in_p.
	* gimple-fold.c (gimple_fold_stmt_to_constant_1): Check if
	TREE_OPERAND (fn, 0) is a FUNCTION_DECL before calling
	fndecl_built_in_p on it.

2019-10-31  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* params.def (PARAM_VECT_EPILOGUES_NOMASK): Enable by default.

2019-10-31  Martin Liska  <mliska@suse.cz>

	* config/arm/arm.c (arm_get_pcs_model): Remove usage
	of cgraph_local_info and use local_info_node instead.
	* config/bfin/bfin.c (bfin_load_pic_reg): Likewise.
	(bfin_function_ok_for_sibcall): Likewise.
	* config/c6x/c6x.c (c6x_function_ok_for_sibcall): Likewise.
	(must_reload_pic_reg_p): Likewise.

2019-10-31  Jakub Jelinek  <jakub@redhat.com>

	PR c++/90947
	* tree.h (type_initializer_zero_p): Remove.
	* tree.c (type_initializer_zero_p): Remove.

2019-10-30  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* doc/invoke.texi (-Wshadow, -Wshadow=global
	-Wshadow=local, -Wshadow=compatible-local): Update documentation.

2019-10-30  Tobias Burnus  <tobias@codesourcery.com>

	* gimplify.c (gimplify_scan_omp_clauses): Remove FE-generated
	GOMP_MAP_TO_PSET and GOMP_MAP_POINTER mapping for 'target update'
	and 'target exit data'.

2019-10-30  Martin Jambor  <mjambor@suse.cz>

	ipa/92278
	* cgraph.c (cgraph_edge::possibly_call_in_translation_unit_p): Fix
	availability comparison.

2019-10-30  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_expand_helper): Support expansion of
	calls to __mspabi_mpy* functions.
	* config/msp430/msp430.md (mulhisi3): New define_expand.
	(umulhisi3): New define_expand.
	(*mulhisi3_inline): Use old mulhisi3 define_insn.
	(*umulhisi3_inline): Use old umulhisi3 define_insn.

2019-10-30  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_check_index_not_high_mem): New.
	(msp430_check_plus_not_high_mem): New.
	(msp430_op_not_in_high_mem): Use new functions to check if the operand
	might be in low memory.
	Indicate that a 16-bit absolute address is in lower memory.

2019-10-30  Martin Jambor  <mjambor@suse.cz>

	* ipa-prop.c (ipa_compute_jump_functions_for_bb): Fix the call to
	ultimate_alias_target.

2019-10-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92275
	* tree-vect-loop-manip.c (slpeel_update_phi_nodes_for_loops):
	Copy all loop-closed PHIs.

2019-10-30  Martin Liska  <mliska@suse.cz>

	* ipa-icf-gimple.c (func_checker::compare_ssa_name): Use
	const_tree as function argument.
	(func_checker::compare_decl): Likewise.
	(func_checker::operand_equal_p): Likewise.
	(func_checker::compare_variable_decl): Likewise.
	(func_checker::parse_labels): Likewise.
	* ipa-icf-gimple.h: Likewise.

2019-10-30  Martin Liska  <mliska@suse.cz>

	* ipa-icf-gimple.c (func_checker::compatible_types_p):
	Do not compare alias sets.  It's handled by operand_equal_p.

2019-10-30  Martin Liska  <mliska@suse.cz>

	* ipa-icf-gimple.c (func_checker::func_checker): Do not
	initialize m_compare_polymorphic.
	(func_checker::compare_decl): Do not compare polymorphic types.
	* ipa-icf-gimple.h (m_compare_polymorphic): Remove.
	* ipa-icf.c (sem_function::equals_private): Do not call
	compare_polymorphic_p.

2019-10-30  Martin Liska  <mliska@suse.cz>

	* ipa-icf-gimple.c (func_checker::compare_ssa_name): Call
	compare_operand.
	(func_checker::compare_memory_operand): Remove.
	(func_checker::compare_cst_or_decl): Remove.
	(func_checker::operand_equal_valueize): Do not handle
	FIELD_DECL.
	(func_checker::compare_gimple_call): Call compare_operand.
	(func_checker::compare_gimple_assign): Likewise.
	* ipa-icf-gimple.h: Remove compare_cst_or_decl.
	* ipa-icf.c (sem_function::icf_handled_component_p): Remove.
	* ipa-icf.h (icf_handled_component_p): Remove.

2019-10-30  Martin Liska  <mliska@suse.cz>

	* ipa-icf-gimple.c (func_checker::hash_operand): New.
	(func_checker::compare_cst_or_decl): Remove handling
	of FIELD_DECL.
	(func_checker::compare_operand): Transform to ...
	(func_checker::operand_equal_p): ... this.
	* ipa-icf-gimple.h (class func_checker): Add
	operand_equal_p and hash_operand.
	* ipa-icf.c (sem_function::equals_private): Fix
	pushing and popping of cfun.

2019-10-30  Martin Liska  <mliska@suse.cz>

	* fold-const.c (operand_equal_p): Move to ...
	(operand_compare::operand_equal_p): ... here.
	(operand_compare::verify_hash_value): New.
	(add_expr): Move to ...
	(operand_compare::hash_operand): ... here.
	* fold-const.h (operand_equal_p): Move to the class.
	(class operand_compare): New.
	* tree.c (add_expr): Remove.

2019-10-30  Martin Liska  <mliska@suse.cz>

	* fold-const.c (operand_equal_p): Support OBJ_TYPE_REF.
	* tree.c (add_expr): Hash parts of OBJ_TYPE_REF.

2019-10-30  Martin Liska  <mliska@suse.cz>

	PR lto/91393
	PR lto/88220
	* cgraph.c (cgraph_node::get_create): Overwrite node->order
	from a first_clone in order to get proper LTO section
	in LTO stream.
	(cgraph_node::get_untransformed_body):
	Use lto_get_section_data where symtab_node::order
	must be provided.
	* cgraphclones.c (cgraph_node::find_replacement):
	Update also symbol order.
	* ipa-fnsummary.c (ipa_fn_summary_read):
	Use new function lto_get_summary_section_data.
	* ipa-hsa.c (ipa_hsa_read_summary): Likewise.
	* ipa-icf.c (sem_item_optimizer::read_summary):
	Likewise.
	* ipa-prop.c (ipa_prop_read_jump_functions):
	Likewise.
	(ipcp_read_transformation_summaries): Likewise.
	* ipa-sra.c (ipa_sra_read_summary): Likewise.
	* lto-cgraph.c (input_node): Add also order_base.
	(input_varpool_node): Likewise.
	(input_cgraph_1): Assign the order_base.
	(input_cgraph_opt_summary): Use new lto_get_summary_section_data.
	* lto-opts.c (lto_write_options): Pass new argument.
	* lto-section-in.c (lto_get_section_data): Add new argumente order.
	(lto_get_summary_section_data): New.
	(lto_get_raw_section_data): Add order argument.
	(lto_create_simple_input_block): Likewise.
	* lto-section-out.c (lto_destroy_simple_output_block):
	Likewise.
	* lto-streamer-in.c (lto_input_toplevel_asms):
	Use lto_get_summary_section_data.
	(lto_input_mode_table): Likewise.
	* lto-streamer-out.c (produce_asm): Pass symtab_node::order.
	(lto_output_toplevel_asms): Pass new argument.
	(copy_function_or_variable): Likewise.
	(produce_lto_section):Likewise.
	(produce_symtab): Likewise.
	(lto_write_mode_table): Likewise.
	(produce_asm_for_decls): Likewise.
	* lto-streamer.c (lto_get_section_name): Concat symbol name
	and symbol order.
	* lto-streamer.h (lto_get_section_data): Add order argument.
	(lto_get_summary_section_data): New.
	(lto_get_raw_section_data): Add order argument.
	(lto_get_section_name): Likewise.
	* varpool.c (varpool_node::get_constructor): Pass order argument.

2019-10-30  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/92262
	* tree-ssa-loop-ivopts.c (get_debug_computation_at): Don't unshare
	ubase or cbase here.
	(remove_unused_ivs): Unshare comp before using it.

2019-10-30  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-prop.c (update_jump_functions_after_inlining):
	Watch for missing summaries.

2019-10-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/65930
	* tree-vect-loop.c (vect_is_simple_reduction): For reduction
	chains also allow a leading and trailing conversion.
	* tree-vect-slp.c (vect_get_and_check_slp_defs): Handle
	intermediate reduction chains.
	(vect_analyze_slp_instance): Likewise.  Build a SLP
	node for a trailing conversion manually.

2019-10-30  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::local_info): Transform to ...
	(cgraph_node::local_info_node): ... this.
	(cgraph_node::dump): Remove cgraph_local_info and
	put its fields directly into cgraph_node.
	(cgraph_node::get_availability): Likewise.
	(cgraph_node::make_local): Likewise.
	(cgraph_node::verify_node): Likewise.
	* cgraph.h (struct GTY): Likewise.
	* cgraphclones.c (set_new_clone_decl_and_node_flags): Likewise.
	(duplicate_thunk_for_node): Likewise.
	(cgraph_node::create_clone): Likewise.
	(cgraph_node::create_virtual_clone): Likewise.
	(cgraph_node::create_version_clone): Likewise.
	* cgraphunit.c (cgraph_node::reset): Likewise.
	(cgraph_node::finalize_function): Likewise.
	(cgraph_node::add_new_function): Likewise.
	(analyze_functions): Likewise.
	* combine.c (setup_incoming_promotions): Likewise.
	* config/i386/i386.c (ix86_function_regparm): Likewise.
	(ix86_function_sseregparm): Likewise.
	(init_cumulative_args): Likewise.
	* ipa-cp.c (determine_versionability): Likewise.
	(count_callers): Likewise.
	(set_single_call_flag): Likewise.
	(initialize_node_lattices): Likewise.
	(estimate_local_effects): Likewise.
	(create_specialized_node): Likewise.
	(identify_dead_nodes): Likewise.
	* ipa-fnsummary.c (compute_fn_summary): Likewise.
	(ipa_fn_summary_generate): Likewise.
	* ipa-hsa.c (check_warn_node_versionable): Likewise.
	(process_hsa_functions): Likewise.
	* ipa-icf.c (set_local): Likewise.
	* ipa-inline-analysis.c (initialize_inline_failed): Likewise.
	* ipa-inline.c (speculation_useful_p): Likewise.
	* ipa-profile.c (ipa_propagate_frequency): Likewise.
	(ipa_profile): Likewise.
	* ipa-split.c (split_function): Likewise.
	(execute_split_functions): Likewise.
	* ipa-sra.c (ipa_sra_preliminary_function_checks): Likewise.
	(ipa_sra_ipa_function_checks): Likewise.
	* ipa-visibility.c (function_and_variable_visibility): Likewise.
	* ipa.c (symbol_table::remove_unreachable_nodes): Likewise.
	* lto-cgraph.c (lto_output_node): Likewise.
	(input_overwrite_node): Likewise.
	* multiple_target.c (expand_target_clones): Likewise.
	* omp-simd-clone.c (simd_clone_create): Likewise.
	* trans-mem.c (expand_call_tm): Likewise.
	(ipa_tm_mayenterirr_function): Likewise.
	(ipa_tm_diagnose_tm_safe): Likewise.
	(ipa_tm_diagnose_transaction): Likewise.
	(ipa_tm_create_version): Likewise.
	(ipa_tm_transform_calls_redirect): Likewise.
	(ipa_tm_execute): Likewise.
	* tree-inline.c (expand_call_inline): Likewise.

2019-10-29  Martin Liska  <mliska@suse.cz>

	* symbol-summary.h (function_summary): Pass memory location
	to underlaying hash_map (or vec).
	(V>::fast_function_summary): Likewise.

2019-10-29  Martin Liska  <mliska@suse.cz>

	* ggc.h (ggc_alloc_no_dtor): New function.
	* ipa-fnsummary.c (ipa_free_fn_summary): Call
	destructor and ggc_free.
	(ipa_free_size_summary): Call delete instead
	of release.
	* ipa-fnsummary.h: Use new function ggc_alloc_no_dtor.
	* ipa-prop.c (ipa_check_create_edge_args): Likewise.
	(ipa_free_all_edge_args): Call destructor and ggc_free.
	(ipa_free_all_node_params): Likewise.
	(ipcp_free_transformation_sum): Likewise.
	* ipa-prop.h (ipa_check_create_node_params):
	Call new ggc_alloc_no_dtor.
	* ipa-sra.c (ipa_sra_generate_summary): Likewise.
	(ipa_sra_analysis): Call destructor and ggc_free.
	Replace release with delete operator.
	* symbol-summary.h (release): Remove ..
	(V>::~fast_function_summary): and move logic here.
	Likewise for other classes.

2019-10-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92260
	* tree-vect-slp.c (vect_get_constant_vectors): Special-case
	lane-reducing ops.

2019-10-29  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR tree-optimization/88915
	* tree-ssa-loop-niter.h (simplify_replace_tree): Change declaration.
	* tree-ssa-loop-niter.c (simplify_replace_tree): Add context parameter
	and make the valueize function pointer also take a void pointer.
	* tree-ssa-sccvn.c (vn_valueize_wrapper): New function to wrap
	around vn_valueize, to call it without a context.
	(process_bb): Use vn_valueize_wrapper instead of vn_valueize.
	* tree-vect-loop.c (_loop_vec_info): Initialize epilogue_vinfos.
	(~_loop_vec_info): Release epilogue_vinfos.
	(vect_analyze_loop_costing): Use knowledge of main VF to estimate
	number of iterations of epilogue.
	(vect_analyze_loop_2): Adapt to analyse main loop for all supported
	vector sizes when vect-epilogues-nomask=1.  Also keep track of lowest
	versioning threshold needed for main loop.
	(vect_analyze_loop): Likewise.
	(find_in_mapping): New helper function.
	(update_epilogue_loop_vinfo): New function.
	(vect_transform_loop): When vectorizing epilogues re-use analysis done
	on main loop and call update_epilogue_loop_vinfo to update it.
	* tree-vect-loop-manip.c (vect_update_inits_of_drs): No longer insert
	stmts on loop preheader edge.
	(vect_do_peeling): Enable skip-vectors when doing loop versioning if
	we decided to vectorize epilogues.  Update epilogues NITERS and
	construct ADVANCE to update epilogues data references where needed.
	* tree-vectorizer.h (_loop_vec_info): Add epilogue_vinfos.
	(vect_do_peeling, vect_update_inits_of_drs,
	 determine_peel_for_niter, vect_analyze_loop): Add or update
	declarations.
	* tree-vectorizer.c (try_vectorize_loop_1): Make sure to use already
	created loop_vec_info's for epilogues when available.  Otherwise analyse
	epilogue separately.

2019-10-29  Richard Biener  <rguenther@suse.de>

	* doc/tree-ssa.texi (Immediate Uses): Fix FOR_EACH_IMM_USE_STMT
	example.

2019-10-29  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vectorizable_condition): Get the reduction
	index for the COND_EXPR from stmt_info rather than reduc_info.

2019-10-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/65930
	* tree-vect-loop.c (check_reduction_path): Relax single-use
	check allowing out-of-loop uses.
	(vect_is_simple_reduction): SLP reduction chains cannot have
	intermediate stmts used outside of the loop.
	(vect_create_epilog_for_reduction): The adjustment might need
	to be converted.
	(vectorizable_reduction): Annotate live stmts of the reduction
	chain with STMT_VINFO_REDUC_DEF.
	* tree-vect-stms.c (process_use): Remove no longer true asserts.

2019-10-29  Richard Sandiford  <richard.sandiford@arm.com>

	* calls.c (pass_by_reference): Leave the target to decide whether
	POLY_INT_CST-sized arguments should be passed by value or reference,
	rather than forcing them to be passed by reference.
	(must_pass_in_stack_var_size): Likewise.
	* config/aarch64/aarch64.md (LAST_SAVED_REGNUM): Redefine from
	V31_REGNUM to P15_REGNUM.
	* config/aarch64/aarch64-protos.h (aarch64_init_cumulative_args):
	Take an extra "silent_p" parameter, defaulting to false.
	(aarch64_sve::svbool_type_p): Declare.
	(aarch64_sve::nvectors_if_data_type): Likewise.
	* config/aarch64/aarch64.h (NUM_PR_ARG_REGS): New macro.
	(aarch64_frame::reg_offset): Turn into poly_int64s.
	(aarch64_frame::save_regs_size): Likewise.
	(aarch64_frame::below_hard_fp_saved_regs_size): New field.
	(aarch64_frame::sve_callee_adjust): Likewise.
	(aarch64_frame::spare_reg_reg): Likewise.
	(ARM_PCS_SVE): New arm_pcs value.
	(CUMULATIVE_ARGS::aapcs_nprn): New field.
	(CUMULATIVE_ARGS::aapcs_nextnprn): Likewise.
	(CUMULATIVE_ARGS::silent_p): Likewise.
	(BITS_PER_SVE_PRED): New macro.
	* config/aarch64/aarch64.c (handle_aarch64_vector_pcs_attribute): New
	function.  Reject aarch64_vector_pcs attributes on SVE functions.
	(aarch64_attribute_table): Use the above handler.
	(aarch64_sve_abi): New function.
	(aarch64_sve_argument_p): Likewise.
	(aarch64_returns_value_in_sve_regs_p): Likewise.
	(aarch64_takes_arguments_in_sve_regs_p): Likewise.
	(aarch64_fntype_abi): Check for SVE functions and return the SVE PCS
	descriptor for them.
	(aarch64_simd_decl_p): Delete.
	(aarch64_emit_cfi_for_reg_p): New function.
	(aarch64_reg_save_mode): Remove the fndecl argument and instead use
	crtl->abi to choose the mode for FP registers.  Handle the SVE PCS.
	(aarch64_hard_regno_call_part_clobbered): Do not treat FP registers
	as partly clobbered for the SVE PCS.
	(aarch64_function_ok_for_sibcall): Check whether the two functions
	use the same ABI, rather than checking specifically for whether
	they're aarch64_vector_pcs functions.
	(aarch64_pass_by_reference): Raise an error for attempts to pass
	SVE arguments when SVE is disabled.  Pass SVE arguments by reference
	if there are not enough free registers left, or if the argument is
	variadic.
	(aarch64_function_value): Handle SVE predicates, vectors and tuples.
	(aarch64_return_in_memory): Do not return SVE predicates, vectors and
	tuples in memory.
	(aarch64_layout_arg): Take a function_arg_info rather than
	individual properties.  Handle SVE predicates, vectors and tuples.
	Raise an error if they are passed to unprototyped functions.
	(aarch64_function_arg): If the silent_p flag is set, suppress the
	usual error about using float registers without TARGET_FLOAT.
	(aarch64_init_cumulative_args): Take a silent_p parameter and store
	it in the cumulative_args structure.  Initialize aapcs_nprn and
	aapcs_nextnprn.  If the silent_p flag is set, suppress the usual
	error about using float registers without TARGET_FLOAT.
	If the silent_p flag is not set, also raise an error about
	using SVE functions when SVE is disabled.
	(aarch64_function_arg_advance): Update the call to aarch64_layout_arg,
	and call it for SVE functions too.  Update aapcs_nprn similarly
	to the other register counts.
	(aarch64_layout_frame): If a big-endian function needs to save
	and restore Z8-Z15, search for a spare predicate that it can use.
	Store SVE predicates at the bottom of the register save area,
	followed by SVE vectors, then followed by the normal slots.
	Keep pointing the hard frame pointer at the base of the normal slots,
	above the SVE vectors.  Update the various frame creation and
	tear-down strategies for the new layout, initializing the new
	sve_callee_adjust field.  Add an additional layout for frames
	whose saved registers are all SVE registers.
	(aarch64_register_saved_on_entry): Cope with poly_int64 reg_offsets.
	(aarch64_return_address_signing_enabled): Likewise.
	(aarch64_push_regs, aarch64_pop_regs): Update calls to
	aarch64_reg_save_mode.
	(aarch64_adjust_sve_callee_save_base): New function.
	(aarch64_add_cfa_expression): Move earlier in file.  Take the
	saved register as an rtx rather than a register number and use
	its mode for the MEM slot.
	(aarch64_save_callee_saves): Remove the mode argument and instead
	use aarch64_reg_save_mode to get the mode of each save slot.
	Add a hard_fp_valid_p parameter.  Cope with poly_int64 register
	offsets.  Allow GP offsets to be saved at a VL-based offset from
	the stack, handling this case using the frame pointer if available
	or a temporary register otherwise.  Use ST1D to save Z8-Z15 for
	big-endian SVE functions; use normal moves for other SVE saves.
	Only mark the save as frame-related if aarch64_emit_cfi_for_reg_p
	returns true.  Add explicit CFA notes when not storing via the
	stack pointer.  Do not try to pair SVE saves.
	(aarch64_restore_callee_saves): Cope with poly_int64 register
	offsets.  Use LD1D to restore Z8-Z15 for big-endian SVE functions;
	use normal moves for other SVE restores.  Only add CFA restore notes
	if aarch64_emit_cfi_for_reg_p returns true.  Do not try to pair
	SVE restores.
	(aarch64_get_separate_components): Always keep the first SVE save
	in the prologue if we need to use it as a stack probe.  Don't allow
	Z8-Z15 saves and loads to be shrink-wrapped for big-endian targets.
	Likewise the spare predicate register that they need.  Update the
	offset calculation to account for the SVE save area.  Use the
	appropriate range check for SVE LDR and STR instructions.
	(aarch64_components_for_bb): Cope with poly_int64 reg_offsets.
	(aarch64_process_components): Likewise.  Update the offset
	calculation to account for the SVE save area.  Only mark the
	save as frame-related if aarch64_emit_cfi_for_reg_p returns true.
	Do not try to pair SVE saves.
	(aarch64_allocate_and_probe_stack_space): Cope with poly_int64
	reg_offsets.  When handling the final allocation, expect the
	first SVE register save to be part of the initial allocation
	and for it to act as a probe at SP.  Account for the SVE callee
	save area in the dump information.
	(aarch64_expand_prologue): Update the frame diagram.  Fold the
	SVE callee allocation into the initial allocation if stack clash
	protection is enabled.  Use new variables to track the offset
	of the frame chain (and hard frame pointer) from the current
	stack pointer, and likewise the offset of the bottom of the
	register save area.  Update calls to aarch64_save_callee_saves
	and aarch64_add_cfa_expression.  Apply sve_callee_adjust before
	saving the FP&SIMD registers.  Save the predicate registers.
	(aarch64_expand_epilogue): Take below_hard_fp_saved_regs_size
	into account when setting the stack pointer from the frame pointer,
	and when deciding whether we can inherit the initial adjustment
	amount from the prologue.  Restore the predicate registers after
	the vector registers, then apply sve_callee_adjust, then restore
	the general registers.
	(aarch64_secondary_reload): Don't use secondary SVE reloads
	for VNx16BImode.
	(aapcs_vfp_sub_candidate): Assert that the type is not an SVE type.
	(aarch64_short_vector_p): Return false for SVE types.
	(aarch64_vfp_is_call_or_return_candidate): Initialize *is_ha
	at the start of the function.  Return false for SVE types.
	(aarch64_asm_output_variant_pcs): Output .variant_pcs for SVE
	functions too.
	(TARGET_STRICT_ARGUMENT_NAMING): Redefine to request strict naming.
	* config/aarch64/aarch64-sve.md (*aarch64_sve_mov<mode>_le): Extend
	to big-endian targets for bytewise moves.
	(*aarch64_sve_mov<mode>_be): Exclude the bytewise case.

2019-10-29  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>
	    Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	* config.gcc (aarch64*-*-*): Add arm_sve.h to extra_headers.
	Add aarch64-sve-builtins.o, aarch64-sve-builtins-shapes.o and
	aarch64-sve-builtins-base.o to extra_objs.  Add
	aarch64-sve-builtins.h and aarch64-sve-builtins.cc to target_gtfiles.
	* config/aarch64/t-aarch64 (aarch64-sve-builtins.o): New rule.
	(aarch64-sve-builtins-shapes.o): Likewise.
	(aarch64-sve-builtins-base.o): New rules.
	* config/aarch64/aarch64-c.c (aarch64_pragma_aarch64): New function.
	(aarch64_resolve_overloaded_builtin): Likewise.
	(aarch64_check_builtin_call): Likewise.
	(aarch64_register_pragmas): Install aarch64_resolve_overloaded_builtin
	and aarch64_check_builtin_call in targetm.  Register the GCC aarch64
	pragma.
	* config/aarch64/aarch64-protos.h (AARCH64_FOR_SVPRFOP): New macro.
	(aarch64_svprfop): New enum.
	(AARCH64_BUILTIN_SVE): New aarch64_builtin_class enum value.
	(aarch64_sve_int_mode, aarch64_sve_data_mode): Declare.
	(aarch64_fold_sve_cnt_pat, aarch64_output_sve_prefetch): Likewise.
	(aarch64_output_sve_cnt_pat_immediate): Likewise.
	(aarch64_output_sve_ptrues, aarch64_sve_ptrue_svpattern_p): Likewise.
	(aarch64_sve_sqadd_sqsub_immediate_p, aarch64_sve_ldff1_operand_p)
	(aarch64_sve_ldnf1_operand_p, aarch64_sve_prefetch_operand_p)
	(aarch64_ptrue_all_mode, aarch64_convert_sve_data_to_pred): Likewise.
	(aarch64_expand_sve_dupq, aarch64_replace_reg_mode): Likewise.
	(aarch64_sve::init_builtins, aarch64_sve::handle_arm_sve_h): Likewise.
	(aarch64_sve::builtin_decl, aarch64_sve::builtin_type_p): Likewise.
	(aarch64_sve::mangle_builtin_type): Likewise.
	(aarch64_sve::resolve_overloaded_builtin): Likewise.
	(aarch64_sve::check_builtin_call, aarch64_sve::gimple_fold_builtin)
	(aarch64_sve::expand_builtin): Likewise.
	* config/aarch64/aarch64.c (aarch64_sve_data_mode): Make public.
	(aarch64_sve_int_mode): Likewise.
	(aarch64_ptrue_all_mode): New function.
	(aarch64_convert_sve_data_to_pred): Make public.
	(svprfop_token): New function.
	(aarch64_output_sve_prefetch): Likewise.
	(aarch64_fold_sve_cnt_pat): Likewise.
	(aarch64_output_sve_cnt_pat_immediate): Likewise.
	(aarch64_sve_move_pred_via_while): Use gen_while with UNSPEC_WHILE_LO
	instead of gen_while_ult.
	(aarch64_replace_reg_mode): Make public.
	(aarch64_init_builtins): Call aarch64_sve::init_builtins.
	(aarch64_fold_builtin): Handle AARCH64_BUILTIN_SVE.
	(aarch64_gimple_fold_builtin, aarch64_expand_builtin): Likewise.
	(aarch64_builtin_decl, aarch64_builtin_reciprocal): Likewise.
	(aarch64_mangle_type): Call aarch64_sve::mangle_type.
	(aarch64_sve_sqadd_sqsub_immediate_p): New function.
	(aarch64_sve_ptrue_svpattern_p): Likewise.
	(aarch64_sve_pred_valid_immediate): Check
	aarch64_sve_ptrue_svpattern_p.
	(aarch64_sve_ldff1_operand_p, aarch64_sve_ldnf1_operand_p)
	(aarch64_sve_prefetch_operand_p, aarch64_output_sve_ptrues): New
	functions.
	* config/aarch64/aarch64.md (UNSPEC_LDNT1_SVE, UNSPEC_STNT1_SVE)
	(UNSPEC_LDFF1_GATHER, UNSPEC_PTRUE, UNSPEC_WHILE_LE, UNSPEC_WHILE_LS)
	(UNSPEC_WHILE_LT, UNSPEC_CLASTA, UNSPEC_UPDATE_FFR)
	(UNSPEC_UPDATE_FFRT, UNSPEC_RDFFR, UNSPEC_WRFFR)
	(UNSPEC_SVE_LANE_SELECT, UNSPEC_SVE_CNT_PAT, UNSPEC_SVE_PREFETCH)
	(UNSPEC_SVE_PREFETCH_GATHER, UNSPEC_SVE_COMPACT, UNSPEC_SVE_SPLICE):
	New unspecs.
	* config/aarch64/iterators.md (SI_ONLY, DI_ONLY, VNx8HI_ONLY)
	(VNx2DI_ONLY, SVE_PARTIAL, VNx8_NARROW, VNx8_WIDE, VNx4_NARROW)
	(VNx4_WIDE, VNx2_NARROW, VNx2_WIDE, PRED_HSD): New mode iterators.
	(UNSPEC_ADR, UNSPEC_BRKA, UNSPEC_BRKB, UNSPEC_BRKN, UNSPEC_BRKPA)
	(UNSPEC_BRKPB, UNSPEC_PFIRST, UNSPEC_PNEXT, UNSPEC_CNTP, UNSPEC_SADDV)
	(UNSPEC_UADDV, UNSPEC_FMLA, UNSPEC_FMLS, UNSPEC_FEXPA, UNSPEC_FTMAD)
	(UNSPEC_FTSMUL, UNSPEC_FTSSEL, UNSPEC_COND_CMPEQ_WIDE): New unspecs.
	(UNSPEC_COND_CMPGE_WIDE, UNSPEC_COND_CMPGT_WIDE): Likewise.
	(UNSPEC_COND_CMPHI_WIDE, UNSPEC_COND_CMPHS_WIDE): Likewise.
	(UNSPEC_COND_CMPLE_WIDE, UNSPEC_COND_CMPLO_WIDE): Likewise.
	(UNSPEC_COND_CMPLS_WIDE, UNSPEC_COND_CMPLT_WIDE): Likewise.
	(UNSPEC_COND_CMPNE_WIDE, UNSPEC_COND_FCADD90, UNSPEC_COND_FCADD270)
	(UNSPEC_COND_FCMLA, UNSPEC_COND_FCMLA90, UNSPEC_COND_FCMLA180)
	(UNSPEC_COND_FCMLA270, UNSPEC_COND_FMAX, UNSPEC_COND_FMIN): Likewise.
	(UNSPEC_COND_FMULX, UNSPEC_COND_FRECPX, UNSPEC_COND_FSCALE): Likewise.
	(UNSPEC_LASTA, UNSPEC_ASHIFT_WIDE, UNSPEC_ASHIFTRT_WIDE): Likewise.
	(UNSPEC_LSHIFTRT_WIDE, UNSPEC_LDFF1, UNSPEC_LDNF1): Likewise.
	(Vesize): Handle partial vector modes.
	(self_mask, narrower_mask, sve_lane_con, sve_lane_pair_con): New
	mode attributes.
	(UBINQOPS, ANY_PLUS, SAT_PLUS, ANY_MINUS, SAT_MINUS): New code
	iterators.
	(s, paired_extend, inc_dec): New code attributes.
	(SVE_INT_ADDV, CLAST, LAST): New int iterators.
	(SVE_INT_UNARY): Add UNSPEC_RBIT.
	(SVE_FP_UNARY, SVE_FP_UNARY_INT): New int iterators.
	(SVE_FP_BINARY, SVE_FP_BINARY_INT): Likewise.
	(SVE_COND_FP_UNARY): Add UNSPEC_COND_FRECPX.
	(SVE_COND_FP_BINARY): Add UNSPEC_COND_FMAX, UNSPEC_COND_FMIN and
	UNSPEC_COND_FMULX.
	(SVE_COND_FP_BINARY_INT, SVE_COND_FP_ADD): New int iterators.
	(SVE_COND_FP_SUB, SVE_COND_FP_MUL): Likewise.
	(SVE_COND_FP_BINARY_I1): Add UNSPEC_COND_FMAX and UNSPEC_COND_FMIN.
	(SVE_COND_FP_BINARY_REG): Add UNSPEC_COND_FMULX.
	(SVE_COND_FCADD, SVE_COND_FP_MAXMIN, SVE_COND_FCMLA)
	(SVE_COND_INT_CMP_WIDE, SVE_FP_TERNARY_LANE, SVE_CFP_TERNARY_LANE)
	(SVE_WHILE, SVE_SHIFT_WIDE, SVE_LDFF1_LDNF1, SVE_BRK_UNARY)
	(SVE_BRK_BINARY, SVE_PITER): New int iterators.
	(optab): Handle UNSPEC_SADDV, UNSPEC_UADDV, UNSPEC_FRECPE,
	UNSPEC_FRECPS, UNSPEC_RSQRTE, UNSPEC_RSQRTS, UNSPEC_RBIT,
	UNSPEC_SMUL_HIGHPART, UNSPEC_UMUL_HIGHPART, UNSPEC_FMLA, UNSPEC_FMLS,
	UNSPEC_FCMLA, UNSPEC_FCMLA90, UNSPEC_FCMLA180, UNSPEC_FCMLA270,
	UNSPEC_FEXPA, UNSPEC_FTSMUL, UNSPEC_FTSSEL, UNSPEC_COND_FCADD90,
	UNSPEC_COND_FCADD270, UNSPEC_COND_FCMLA, UNSPEC_COND_FCMLA90,
	UNSPEC_COND_FCMLA180, UNSPEC_COND_FCMLA270, UNSPEC_COND_FMAX,
	UNSPEC_COND_FMIN, UNSPEC_COND_FMULX, UNSPEC_COND_FRECPX and
	UNSPEC_COND_FSCALE.
	(maxmin_uns): Handle UNSPEC_COND_FMAX and UNSPEC_COND_FMIN.
	(binqops_op, binqops_op_rev, last_op): New int attributes.
	(su): Handle UNSPEC_SADDV and UNSPEC_UADDV.
	(fn, ab): New int attributes.
	(cmp_op): Handle UNSPEC_COND_CMP*_WIDE and UNSPEC_WHILE_*.
	(while_optab_cmp, brk_op, sve_pred_op): New int attributes.
	(sve_int_op): Handle UNSPEC_SMUL_HIGHPART, UNSPEC_UMUL_HIGHPART,
	UNSPEC_ASHIFT_WIDE, UNSPEC_ASHIFTRT_WIDE, UNSPEC_LSHIFTRT_WIDE and
	UNSPEC_RBIT.
	(sve_fp_op): Handle UNSPEC_FRECPE, UNSPEC_FRECPS, UNSPEC_RSQRTE,
	UNSPEC_RSQRTS, UNSPEC_FMLA, UNSPEC_FMLS, UNSPEC_FEXPA, UNSPEC_FTSMUL,
	UNSPEC_FTSSEL, UNSPEC_COND_FMAX, UNSPEC_COND_FMIN, UNSPEC_COND_FMULX,
	UNSPEC_COND_FRECPX and UNSPEC_COND_FSCALE.
	(sve_fp_op_rev): Handle UNSPEC_COND_FMAX, UNSPEC_COND_FMIN and
	UNSPEC_COND_FMULX.
	(rot): Handle UNSPEC_COND_FCADD* and UNSPEC_COND_FCMLA*.
	(brk_reg_con, brk_reg_opno): New int attributes.
	(sve_pred_fp_rhs1_operand, sve_pred_fp_rhs2_operand): Handle
	UNSPEC_COND_FMAX, UNSPEC_COND_FMIN and UNSPEC_COND_FMULX.
	(sve_pred_fp_rhs2_immediate): Handle UNSPEC_COND_FMAX and
	UNSPEC_COND_FMIN.
	(max_elem_bits): New int attribute.
	(min_elem_bits): Handle UNSPEC_RBIT.
	* config/aarch64/predicates.md (subreg_lowpart_operator): Handle
	TRUNCATE as well as SUBREG.
	(ascending_int_parallel, aarch64_simd_reg_or_minus_one)
	(aarch64_sve_ldff1_operand, aarch64_sve_ldnf1_operand)
	(aarch64_sve_prefetch_operand, aarch64_sve_ptrue_svpattern_immediate)
	(aarch64_sve_qadd_immediate, aarch64_sve_qsub_immediate)
	(aarch64_sve_gather_immediate_b, aarch64_sve_gather_immediate_h)
	(aarch64_sve_gather_immediate_w, aarch64_sve_gather_immediate_d)
	(aarch64_sve_sqadd_operand, aarch64_sve_gather_offset_b)
	(aarch64_sve_gather_offset_h, aarch64_sve_gather_offset_w)
	(aarch64_sve_gather_offset_d, aarch64_gather_scale_operand_b)
	(aarch64_gather_scale_operand_h): New predicates.
	* config/aarch64/constraints.md (UPb, UPd, UPh, UPw, Utf, Utn, vgb)
	(vgd, vgh, vgw, vsQ, vsS): New constraints.
	* config/aarch64/aarch64-sve.md: Add a note on the FFR handling.
	(*aarch64_sve_reinterpret<mode>): Allow any source register
	instead of requiring an exact match.
	(*aarch64_sve_ptruevnx16bi_cc, *aarch64_sve_ptrue<mode>_cc)
	(*aarch64_sve_ptruevnx16bi_ptest, *aarch64_sve_ptrue<mode>_ptest)
	(aarch64_wrffr, aarch64_update_ffr_for_load, aarch64_copy_ffr_to_ffrt)
	(aarch64_rdffr, aarch64_rdffr_z, *aarch64_rdffr_z_ptest)
	(*aarch64_rdffr_ptest, *aarch64_rdffr_z_cc, *aarch64_rdffr_cc)
	(aarch64_update_ffrt): New patterns.
	(@aarch64_load_<ANY_EXTEND:optab><VNx8_WIDE:mode><VNx8_NARROW:mode>)
	(@aarch64_load_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>)
	(@aarch64_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>)
	(@aarch64_ld<fn>f1<mode>): New patterns.
	(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><VNx8_WIDE:mode><VNx8_NARROW:mode>)
	(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>)
	(@aarch64_ld<fn>f1_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>)
	(@aarch64_ldnt1<mode>): New patterns.
	(gather_load<mode>): Use aarch64_sve_gather_offset_<Vesize> for
	the scalar part of the address.
	(mask_gather_load<SVE_S:mode>): Use aarch64_sve_gather_offset_w for the
	scalar part of the addresse and add an alternative for handling
	nonzero offsets.
	(mask_gather_load<SVE_D:mode>): Likewise aarch64_sve_gather_offset_d.
	(*mask_gather_load<mode>_sxtw, *mask_gather_load<mode>_uxtw)
	(@aarch64_gather_load_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>)
	(@aarch64_gather_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>)
	(*aarch64_gather_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_sxtw)
	(*aarch64_gather_load_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_uxtw)
	(@aarch64_ldff1_gather<SVE_S:mode>, @aarch64_ldff1_gather<SVE_D:mode>)
	(*aarch64_ldff1_gather<mode>_sxtw, *aarch64_ldff1_gather<mode>_uxtw)
	(@aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx4_WIDE:mode><VNx4_NARROW:mode>)
	(@aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>)
	(*aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_sxtw)
	(*aarch64_ldff1_gather_<ANY_EXTEND:optab><VNx2_WIDE:mode><VNx2_NARROW:mode>_uxtw)
	(@aarch64_sve_prefetch<mode>): New patterns.
	(@aarch64_sve_gather_prefetch<SVE_I:mode><VNx4SI_ONLY:mode>)
	(@aarch64_sve_gather_prefetch<SVE_I:mode><VNx2DI_ONLY:mode>)
	(*aarch64_sve_gather_prefetch<SVE_I:mode><VNx2DI_ONLY:mode>_sxtw)
	(*aarch64_sve_gather_prefetch<SVE_I:mode><VNx2DI_ONLY:mode>_uxtw)
	(@aarch64_store_trunc<VNx8_NARROW:mode><VNx8_WIDE:mode>)
	(@aarch64_store_trunc<VNx4_NARROW:mode><VNx4_WIDE:mode>)
	(@aarch64_store_trunc<VNx2_NARROW:mode><VNx2_WIDE:mode>)
	(@aarch64_stnt1<mode>): New patterns.
	(scatter_store<mode>): Use aarch64_sve_gather_offset_<Vesize> for
	the scalar part of the address.
	(mask_scatter_store<SVE_S:mode>): Use aarch64_sve_gather_offset_w for
	the scalar part of the addresse and add an alternative for handling
	nonzero offsets.
	(mask_scatter_store<SVE_D:mode>): Likewise aarch64_sve_gather_offset_d.
	(*mask_scatter_store<mode>_sxtw, *mask_scatter_store<mode>_uxtw)
	(@aarch64_scatter_store_trunc<VNx4_NARROW:mode><VNx4_WIDE:mode>)
	(@aarch64_scatter_store_trunc<VNx2_NARROW:mode><VNx2_WIDE:mode>)
	(*aarch64_scatter_store_trunc<VNx2_NARROW:mode><VNx2_WIDE:mode>_sxtw)
	(*aarch64_scatter_store_trunc<VNx2_NARROW:mode><VNx2_WIDE:mode>_uxtw):
	New patterns.
	(vec_duplicate<mode>): Use QI as the mode of the input operand.
	(extract_last_<mode>): Generalize to...
	(@extract_<LAST:last_op>_<mode>): ...this.
	(*<SVE_INT_UNARY:optab><mode>2): Rename to...
	(@aarch64_pred_<SVE_INT_UNARY:optab><mode>): ...this.
	(@cond_<SVE_INT_UNARY:optab><mode>): New expander.
	(@aarch64_pred_sxt<SVE_HSDI:mode><SVE_PARTIAL:mode>): New pattern.
	(@aarch64_cond_sxt<SVE_HSDI:mode><SVE_PARTIAL:mode>): Likewise.
	(@aarch64_pred_cnot<mode>, @cond_cnot<mode>): New expanders.
	(@aarch64_sve_<SVE_FP_UNARY_INT:optab><mode>): New pattern.
	(@aarch64_sve_<SVE_FP_UNARY:optab><mode>): Likewise.
	(*<SVE_COND_FP_UNARY:optab><mode>2): Rename to...
	(@aarch64_pred_<SVE_COND_FP_UNARY:optab><mode>): ...this.
	(@cond_<SVE_COND_FP_UNARY:optab><mode>): New expander.
	(*<SVE_INT_BINARY_IMM:optab><mode>3): Rename to...
	(@aarch64_pred_<SVE_INT_BINARY_IMM:optab><mode>): ...this.
	(@aarch64_adr<mode>, *aarch64_adr_sxtw): New patterns.
	(*aarch64_adr_uxtw_unspec): Likewise.
	(*aarch64_adr_uxtw): Rename to...
	(*aarch64_adr_uxtw_and): ...this.
	(@aarch64_adr<mode>_shift): New expander.
	(*aarch64_adr_shift_sxtw): New pattern.
	(aarch64_<su>abd<mode>_3): Rename to...
	(@aarch64_pred_<su>abd<mode>): ...this.
	(<su>abd<mode>_3): Update accordingly.
	(@aarch64_cond_<su>abd<mode>): New expander.
	(@aarch64_<SBINQOPS:su_optab><optab><mode>): New pattern.
	(@aarch64_<UBINQOPS:su_optab><optab><mode>): Likewise.
	(*<su>mul<mode>3_highpart): Rename to...
	(@aarch64_pred_<optab><mode>): ...this.
	(@cond_<MUL_HIGHPART:optab><mode>): New expander.
	(*cond_<MUL_HIGHPART:optab><mode>_2): New pattern.
	(*cond_<MUL_HIGHPART:optab><mode>_z): Likewise.
	(*<SVE_INT_BINARY_SD:optab><mode>3): Rename to...
	(@aarch64_pred_<SVE_INT_BINARY_SD:optab><mode>): ...this.
	(cond_<SVE_INT_BINARY_SD:optab><mode>): Add a "@" marker.
	(@aarch64_bic<mode>, @cond_bic<mode>): New expanders.
	(*v<ASHIFT:optab><mode>3): Rename to...
	(@aarch64_pred_<ASHIFT:optab><mode>): ...this.
	(@aarch64_sve_<SVE_SHIFT_WIDE:sve_int_op><mode>): New pattern.
	(@cond_<SVE_SHIFT_WIDE:sve_int_op><mode>): New expander.
	(*cond_<SVE_SHIFT_WIDE:sve_int_op><mode>_m): New pattern.
	(*cond_<SVE_SHIFT_WIDE:sve_int_op><mode>_z): Likewise.
	(@cond_asrd<mode>): New expander.
	(*cond_asrd<mode>_2, *cond_asrd<mode>_z): New patterns.
	(sdiv_pow2<mode>3): Expand to *cond_asrd<mode>_2.
	(*sdiv_pow2<mode>3): Delete.
	(@cond_<SVE_COND_FP_BINARY_INT:optab><mode>): New expander.
	(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_2): New pattern.
	(*cond_<SVE_COND_FP_BINARY_INT:optab><mode>_any): Likewise.
	(@aarch64_sve_<SVE_FP_BINARY:optab><mode>): New pattern.
	(@aarch64_sve_<SVE_FP_BINARY_INT:optab><mode>): Likewise.
	(*<SVE_COND_FP_BINARY_REG:optab><mode>3): Rename to...
	(@aarch64_pred_<SVE_COND_FP_BINARY_REG:optab><mode>): ...this.
	(@aarch64_pred_<SVE_COND_FP_BINARY_INT:optab><mode>): New pattern.
	(cond_<SVE_COND_FP_BINARY:optab><mode>): Add a "@" marker.
	(*add<SVE_F:mode>3): Rename to...
	(@aarch64_pred_add<SVE_F:mode>): ...this and add alternatives
	for SVE_STRICT_GP.
	(@aarch64_pred_<SVE_COND_FCADD:optab><mode>): New pattern.
	(@cond_<SVE_COND_FCADD:optab><mode>): New expander.
	(*cond_<SVE_COND_FCADD:optab><mode>_2): New pattern.
	(*cond_<SVE_COND_FCADD:optab><mode>_any): Likewise.
	(*sub<SVE_F:mode>3): Rename to...
	(@aarch64_pred_sub<SVE_F:mode>): ...this and add alternatives
	for SVE_STRICT_GP.
	(@aarch64_pred_abd<SVE_F:mode>): New expander.
	(*fabd<SVE_F:mode>3): Rename to...
	(*aarch64_pred_abd<SVE_F:mode>): ...this.
	(@aarch64_cond_abd<SVE_F:mode>): New expander.
	(*mul<SVE_F:mode>3): Rename to...
	(@aarch64_pred_<SVE_F:optab><mode>): ...this and add alternatives
	for SVE_STRICT_GP.
	(@aarch64_mul_lane_<SVE_F:mode>): New pattern.
	(*<SVE_COND_FP_MAXMIN_PUBLIC:optab><mode>3): Rename and generalize
	to...
	(@aarch64_pred_<SVE_COND_FP_MAXMIN:optab><mode>): ...this.
	(*<LOGICAL:optab><PRED_ALL:mode>3_ptest): New pattern.
	(*<nlogical><PRED_ALL:mode>3): Rename to...
	(aarch64_pred_<nlogical><PRED_ALL:mode>_z): ...this.
	(*<nlogical><PRED_ALL:mode>3_cc): New pattern.
	(*<nlogical><PRED_ALL:mode>3_ptest): Likewise.
	(*<logical_nn><PRED_ALL:mode>3): Rename to...
	(aarch64_pred_<logical_nn><mode>_z): ...this.
	(*<logical_nn><PRED_ALL:mode>3_cc): New pattern.
	(*<logical_nn><PRED_ALL:mode>3_ptest): Likewise.
	(*fma<SVE_I:mode>4): Rename to...
	(@aarch64_pred_fma<SVE_I:mode>): ...this.
	(*fnma<SVE_I:mode>4): Rename to...
	(@aarch64_pred_fnma<SVE_I:mode>): ...this.
	(@aarch64_<sur>dot_prod_lane<vsi2qi>): New pattern.
	(*<SVE_FP_TERNARY:optab><mode>4): Rename to...
	(@aarch64_pred_<SVE_FP_TERNARY:optab><mode>): ...this.
	(cond_<SVE_FP_TERNARY:optab><mode>): Add a "@" marker.
	(@aarch64_<SVE_FP_TERNARY_LANE:optab>_lane_<mode>): New pattern.
	(@aarch64_pred_<SVE_COND_FCMLA:optab><mode>): Likewise.
	(@cond_<SVE_COND_FCMLA:optab><mode>): New expander.
	(*cond_<SVE_COND_FCMLA:optab><mode>_4): New pattern.
	(*cond_<SVE_COND_FCMLA:optab><mode>_any): Likewise.
	(@aarch64_<FCMLA:optab>_lane_<mode>): Likewise.
	(@aarch64_sve_tmad<mode>): Likewise.
	(vcond_mask_<SVE_ALL:mode><vpred>): Add a "@" marker.
	(*aarch64_sel_dup<mode>): Rename to...
	(@aarch64_sel_dup<mode>): ...this.
	(@aarch64_pred_cmp<cmp_op><SVE_I:mode>_wide): New pattern.
	(*aarch64_pred_cmp<cmp_op><SVE_I:mode>_wide_cc): Likewise.
	(*aarch64_pred_cmp<cmp_op><SVE_I:mode>_wide_ptest): Likewise.
	(@while_ult<GPI:mode><PRED_ALL:mode>): Generalize to...
	(@while_<while_optab_cmp><GPI:mode><PRED_ALL:mode>): ...this.
	(*while_ult<GPI:mode><PRED_ALL:mode>_cc): Generalize to.
	(*while_<while_optab_cmp><GPI:mode><PRED_ALL:mode>_cc): ...this.
	(*while_<while_optab_cmp><GPI:mode><PRED_ALL:mode>_ptest): New pattern.
	(*fcm<cmp_op><mode>): Rename to...
	(@aarch64_pred_fcm<cmp_op><mode>): ...this.  Make operand order
	match @aarch64_pred_cmp<cmp_op><SVE_I:mode>.
	(*fcmuo<mode>): Rename to...
	(@aarch64_pred_fcmuo<mode>): ...this.  Make operand order
	match @aarch64_pred_cmp<cmp_op><SVE_I:mode>.
	(@aarch64_pred_fac<cmp_op><mode>): New expander.
	(@vcond_mask_<PRED_ALL:mode><mode>): New pattern.
	(fold_extract_last_<mode>): Generalize to...
	(@fold_extract_<last_op>_<mode>): ...this.
	(@aarch64_fold_extract_vector_<last_op>_<mode>): New pattern.
	(*reduc_plus_scal_<SVE_I:mode>): Replace with...
	(@aarch64_pred_reduc_<optab>_<mode>): ...this pattern, making the
	DImode result explicit.
	(reduc_plus_scal_<mode>): Update accordingly.
	(*reduc_<optab>_scal_<SVE_I:mode>): Rename to...
	(@aarch64_pred_reduc_<optab>_<SVE_I:mode>): ...this.
	(*reduc_<optab>_scal_<SVE_F:mode>): Rename to...
	(@aarch64_pred_reduc_<optab>_<SVE_F:mode>): ...this.
	(*aarch64_sve_tbl<mode>): Rename to...
	(@aarch64_sve_tbl<mode>): ...this.
	(@aarch64_sve_compact<mode>): New pattern.
	(*aarch64_sve_dup_lane<mode>): Rename to...
	(@aarch64_sve_dup_lane<mode>): ...this.
	(@aarch64_sve_dupq_lane<mode>): New pattern.
	(@aarch64_sve_splice<mode>): Likewise.
	(aarch64_sve_<perm_insn><mode>): Rename to...
	(@aarch64_sve_<perm_insn><mode>): ...this.
	(*aarch64_sve_ext<mode>): Rename to...
	(@aarch64_sve_ext<mode>): ...this.
	(aarch64_sve_<su>unpk<perm_hilo>_<SVE_BHSI:mode>): Add a "@" marker.
	(*aarch64_sve_<optab>_nontrunc<SVE_F:mode><SVE_HSDI:mode>): Rename
	to...
	(@aarch64_sve_<optab>_nontrunc<SVE_F:mode><SVE_HSDI:mode>): ...this.
	(*aarch64_sve_<optab>_trunc<VNx2DF_ONLY:mode><VNx4SI_ONLY:mode>):
	Rename to...
	(@aarch64_sve_<optab>_trunc<VNx2DF_ONLY:mode><VNx4SI_ONLY:mode>):
	...this.
	(@cond_<optab>_nontrunc<SVE_F:mode><SVE_HSDI:mode>): New expander.
	(@cond_<optab>_trunc<VNx2DF_ONLY:mode><VNx4SI_ONLY:mode>): Likewise.
	(*cond_<optab>_trunc<VNx2DF_ONLY:mode><VNx4SI_ONLY:mode>): New pattern.
	(*aarch64_sve_<optab>_nonextend<SVE_HSDI:mode><SVE_F:mode>): Rename
	to...
	(@aarch64_sve_<optab>_nonextend<SVE_HSDI:mode><SVE_F:mode>): ...this.
	(aarch64_sve_<optab>_extend<VNx4SI_ONLY:mode><VNx2DF_ONLY:mode>): Add
	a "@" marker.
	(@cond_<optab>_nonextend<SVE_HSDI:mode><SVE_F:mode>): New expander.
	(@cond_<optab>_extend<VNx4SI_ONLY:mode><VNx2DF_ONLY:mode>): Likewise.
	(*cond_<optab>_extend<VNx4SI_ONLY:mode><VNx2DF_ONLY:mode>): New
	pattern.
	(*aarch64_sve_<optab>_trunc<SVE_SDF:mode><SVE_HSF:mode>): Rename to...
	(@aarch64_sve_<optab>_trunc<SVE_SDF:mode><SVE_HSF:mode>): ...this.
	(@cond_<optab>_trunc<SVE_SDF:mode><SVE_HSF:mode>): New expander.
	(*cond_<optab>_trunc<SVE_SDF:mode><SVE_HSF:mode>): New pattern.
	(aarch64_sve_<optab>_nontrunc<SVE_HSF:mode><SVE_SDF:mode>): Add a
	"@" marker.
	(@cond_<optab>_nontrunc<SVE_HSF:mode><SVE_SDF:mode>): New expander.
	(*cond_<optab>_nontrunc<SVE_HSF:mode><SVE_SDF:mode>): New pattern.
	(aarch64_sve_punpk<perm_hilo>_<mode>): Add a "@" marker.
	(@aarch64_brk<SVE_BRK_UNARY:brk_op>): New pattern.
	(*aarch64_brk<SVE_BRK_UNARY:brk_op>_cc): Likewise.
	(*aarch64_brk<SVE_BRK_UNARY:brk_op>_ptest): Likewise.
	(@aarch64_brk<SVE_BRK_BINARY:brk_op>): Likewise.
	(*aarch64_brk<SVE_BRK_BINARY:brk_op>_cc): Likewise.
	(*aarch64_brk<SVE_BRK_BINARY:brk_op>_ptest): Likewise.
	(@aarch64_sve_<SVE_PITER:sve_pred_op><mode>): Likewise.
	(*aarch64_sve_<SVE_PITER:sve_pred_op><mode>_cc): Likewise.
	(*aarch64_sve_<SVE_PITER:sve_pred_op><mode>_ptest): Likewise.
	(aarch64_sve_cnt_pat): Likewise.
	(@aarch64_sve_<ANY_PLUS:inc_dec><DI_ONLY:mode>_pat): Likewise.
	(*aarch64_sve_incsi_pat): Likewise.
	(@aarch64_sve_<SAT_PLUS:inc_dec><SI_ONLY:mode>_pat): Likewise.
	(@aarch64_sve_<ANY_PLUS:inc_dec><VNx2DI_ONLY:mode>_pat): Likewise.
	(@aarch64_sve_<ANY_PLUS:inc_dec><VNx4SI_ONLY:mode>_pat): Likewise.
	(@aarch64_sve_<ANY_PLUS:inc_dec><VNx8HI_ONLY:mode>_pat): New expander.
	(*aarch64_sve_<ANY_PLUS:inc_dec><VNx8HI_ONLY:mode>_pat): New pattern.
	(@aarch64_sve_<ANY_MINUS:inc_dec><DI_ONLY:mode>_pat): Likewise.
	(*aarch64_sve_decsi_pat): Likewise.
	(@aarch64_sve_<SAT_MINUS:inc_dec><SI_ONLY:mode>_pat): Likewise.
	(@aarch64_sve_<ANY_MINUS:inc_dec><VNx2DI_ONLY:mode>_pat): Likewise.
	(@aarch64_sve_<ANY_MINUS:inc_dec><VNx4SI_ONLY:mode>_pat): Likewise.
	(@aarch64_sve_<ANY_MINUS:inc_dec><VNx8HI_ONLY:mode>_pat): New expander.
	(*aarch64_sve_<ANY_MINUS:inc_dec><VNx8HI_ONLY:mode>_pat): New pattern.
	(@aarch64_pred_cntp<mode>): Likewise.
	(@aarch64_sve_<ANY_PLUS:inc_dec><DI_ONLY:mode><PRED_ALL:mode>_cntp):
	New expander.
	(*aarch64_sve_<ANY_PLUS:inc_dec><DI_ONLY:mode><PRED_ALL:mode>_cntp)
	(*aarch64_incsi<PRED_ALL:mode>_cntp): New patterns.
	(@aarch64_sve_<SAT_PLUS:inc_dec><SI_ONLY:mode><PRED_ALL:mode>_cntp):
	New expander.
	(*aarch64_sve_<SAT_PLUS:inc_dec><SI_ONLY:mode><PRED_ALL:mode>_cntp):
	New pattern.
	(@aarch64_sve_<ANY_PLUS:inc_dec><VNx2DI_ONLY:mode>_cntp): New expander.
	(*aarch64_sve_<ANY_PLUS:inc_dec><VNx2DI_ONLY:mode>_cntp): New pattern.
	(@aarch64_sve_<ANY_PLUS:inc_dec><VNx4SI_ONLY:mode>_cntp): New expander.
	(*aarch64_sve_<ANY_PLUS:inc_dec><VNx4SI_ONLY:mode>_cntp): New pattern.
	(@aarch64_sve_<ANY_PLUS:inc_dec><VNx8HI_ONLY:mode>_cntp): New expander.
	(*aarch64_sve_<ANY_PLUS:inc_dec><VNx8HI_ONLY:mode>_cntp): New pattern.
	(@aarch64_sve_<ANY_MINUS:inc_dec><DI_ONLY:mode><PRED_ALL:mode>_cntp):
	New expander.
	(*aarch64_sve_<ANY_MINUS:inc_dec><DI_ONLY:mode><PRED_ALL:mode>_cntp)
	(*aarch64_incsi<PRED_ALL:mode>_cntp): New patterns.
	(@aarch64_sve_<SAT_MINUS:inc_dec><SI_ONLY:mode><PRED_ALL:mode>_cntp):
	New expander.
	(*aarch64_sve_<SAT_MINUS:inc_dec><SI_ONLY:mode><PRED_ALL:mode>_cntp):
	New pattern.
	(@aarch64_sve_<ANY_MINUS:inc_dec><VNx2DI_ONLY:mode>_cntp): New
	expander.
	(*aarch64_sve_<ANY_MINUS:inc_dec><VNx2DI_ONLY:mode>_cntp): New pattern.
	(@aarch64_sve_<ANY_MINUS:inc_dec><VNx4SI_ONLY:mode>_cntp): New
	expander.
	(*aarch64_sve_<ANY_MINUS:inc_dec><VNx4SI_ONLY:mode>_cntp): New pattern.
	(@aarch64_sve_<ANY_MINUS:inc_dec><VNx8HI_ONLY:mode>_cntp): New
	expander.
	(*aarch64_sve_<ANY_MINUS:inc_dec><VNx8HI_ONLY:mode>_cntp): New pattern.
	* config/aarch64/arm_sve.h: New file.
	* config/aarch64/aarch64-sve-builtins.h: Likewise.
	* config/aarch64/aarch64-sve-builtins.cc: Likewise.
	* config/aarch64/aarch64-sve-builtins.def: Likewise.
	* config/aarch64/aarch64-sve-builtins-base.h: Likewise.
	* config/aarch64/aarch64-sve-builtins-base.cc: Likewise.
	* config/aarch64/aarch64-sve-builtins-base.def: Likewise.
	* config/aarch64/aarch64-sve-builtins-functions.h: Likewise.
	* config/aarch64/aarch64-sve-builtins-shapes.h: Likewise.
	* config/aarch64/aarch64-sve-builtins-shapes.cc: Likewise.

2019-10-29  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (@aarch64_sve_rev<PRED_ALL:mode>):
	New pattern.
	* config/aarch64/aarch64.c (aarch64_evpc_rev_global): Handle all
	SVE modes.

2019-10-29  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.md (FFR_REGNUM, FFRT_REGNUM): New constants.
	* config/aarch64/aarch64.h (FIRST_PSEUDO_REGISTER): Bump to
	FFRT_REGNUM + 1.
	(FFR_REGS, PR_AND_FFR_REGS): New register classes.
	(REG_CLASS_NAMES, REG_CLASS_CONTENTS): Add entries for them.
	* config/aarch64/aarch64.c (pr_or_ffr_regnum_p): New function.
	(aarch64_hard_regno_nregs): Handle the new register classes.
	(aarch64_hard_regno_mode_ok): Likewise.
	(aarch64_regno_regclass): Likewise.
	(aarch64_class_max_nregs): Likewise.
	(aarch64_register_move_cost): Likewise.
	(aarch64_conditional_register_usage): Don't treat FFR and FFRT
	as general register_operands.

2019-10-29  Martin Liska  <mliska@suse.cz>

	* ggc-common.c: One can't subtract unsigned types
	in compare function.

2019-10-29  Martin Liska  <mliska@suse.cz>

	* cgraphunit.c (symbol_table::compile): Pass
	title as dump_memory_report argument.
	* toplev.c (dump_memory_report):  New argument.
	(finalize): Pass new argument.
	* toplev.h (dump_memory_report): Add argument.

2019-10-29  Martin Liska  <mliska@suse.cz>

	* ggc-common.c: Move Leak to the first column.

2019-10-29  Martin Liska  <mliska@suse.cz>

	* cgraphunit.c (symbol_table::compile): Remove argument
	for dump_memory_report.
	* ggc-common.c (dump_ggc_loc_statistics): Likewise.
	(compare_final): Remove in order to make report
	better readable.
	* ggc.h (dump_ggc_loc_statistics):  Remove argument.
	* mem-stats.h (mem_alloc_description::get_list):
	Do not pass cmp.
	(mem_alloc_description::dump): Likewise here.
	* toplev.c (dump_memory_report): Remove final
	argument.
	(finalize): Likewise.
	* toplev.h (dump_memory_report): Remove argument.

2019-10-29  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_sve_cmp_immediate_p)
	(aarch64_simd_shift_imm_p): Accept scalars as well as vectors.
	* config/aarch64/predicates.md (aarch64_sve_cmp_vsc_immediate)
	(aarch64_sve_cmp_vsd_immediate): Accept "const_int", but don't
	accept "const".

2019-10-29  Richard Sandiford  <richard.sandiford@arm.com>

	* coretypes.h (string_int_pair): New typedef.
	* langhooks-def.h (LANG_HOOKS_SIMULATE_ENUM_DECL): Define.
	(LANG_HOOKS_FOR_TYPES_INITIALIZER): Include it.
	* langhooks.h (lang_hooks_for_types::simulate_enum_decl): New hook.

2019-10-29  Richard Sandiford  <richard.sandiford@arm.com>

	* langhooks.h (lang_hooks::simulate_builtin_function_decl): New hook.
	(simulate_builtin_function_decl): Declare.
	* langhooks-def.h (LANG_HOOKS_SIMULATE_BUILTIN_FUNCTION_DECL): Define.
	(LANG_HOOKS_INITIALIZER): Include it.
	* langhooks.c (add_builtin_function_common): Rename to...
	(build_builtin_function): ...this.  Add a location parameter and use
	it instead of BUILTINS_LOCATION.  Remove the hook parameter and return
	the decl instead.
	(add_builtin_function): Update accordingly, passing the returned
	decl to the lang hook.
	(add_builtin_function_ext_scope): Likewise
	(simulate_builtin_function_decl): New function.

2019-10-29  Jakub Jelinek  <jakub@redhat.com>

	* doc/install.texi (--enable-offload-targets): Fix up a typo in the
	example, use actual names of supported offload targets.

	PR target/92258
	* config/i386/sse.md (iptr): Revert 2019-10-27 change.

2019-10-28  Martin Sebor  <msebor@redhat.com>

	* tree-ssa-strlen.c (get_addr_stridx): Add argument and use it.
	(handle_store): Pass argument to get_addr_stridx.

2019-10-28  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/92226
	* tree-ssa-strlen.c (compare_nonzero_chars): Return -1 also when
	the offset is in the open range outlined by SI's length.

2019-10-28  Martin Sebor  <msebor@redhat.com>

	PR c/66970
	* doc/cpp.texi (__has_builtin): Document.
	* doc/extend.texi (__builtin_frob_return_addr): Correct spelling.

2019-10-28  Mihailo Stojanovic  <mistojanovic@wavecomp.com>

	PR target/82981
	* config/mips/mips.md (<u>mulditi3): Generate patterns for high
	doubleword and low doubleword result of multiplication on
	MIPS64R6.

	* config/mips/mips.c (DIRECT_BUILTIN_PURE): New macro. Add a
	pure qualifier to the built-in.
	(MSA_BUILTIN_PURE): New macro. Add a pure qualifier to the MSA
	built-ins.
	(struct mips_builtin_description): Add is_pure flag.
	(mips_init_builtins): Mark built-in as pure if the flag in the
	corresponding mips_builtin_description struct is set.

	* config/mips/mips-msa.md (msa_insert_<msaftm_f>): Add an
	alternative which covers the floating-point input value. Also
	forbid the split of insert.d pattern for floating-point values.

2019-10-28  Andrew Burgess  <andrew.burgess@embecosm.com>

	* config.gcc: Add riscv-sr.o to extra_objs for riscv.
	* config/riscv/riscv-sr.c: New file.
	* config/riscv/riscv.c (riscv_reorg): New function.
	(TARGET_MACHINE_DEPENDENT_REORG): Define.
	* config/riscv/riscv.h (SIBCALL_REG_P): Define.
	(riscv_remove_unneeded_save_restore_calls): Declare.
	* config/riscv/t-riscv (riscv-sr.o): New build rule.

2019-10-28  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/92163
	* tree-ssa-dse.c (delete_dead_or_redundant_assignment): New param
	need_eh_cleanup with default value NULL. Gate on need_eh_cleanup
	before calling bitmap_set_bit.
	(dse_optimize_redundant_stores): Pass global need_eh_cleanup to
	delete_dead_or_redundant_assignment.
	(dse_dom_walker::dse_optimize_stmt): Likewise.
	* tree-ssa-dse.h (delete_dead_or_redundant_assignment): Adjust prototype.

2019-10-28  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR middle-end/91272
	* tree-vect-stmts.c (vectorizable_condition): Support
	EXTRACT_LAST_REDUCTION with fully-masked loops.

2019-10-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92252
	* tree-vect-slp.c (vect_get_and_check_slp_defs): Adjust
	STMT_VINFO_REDUC_IDX when swapping operands.

2019-10-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92241
	* tree-vect-loop.c (vect_fixup_scalar_cycles_with_patterns): When
	we failed to update the reduction index do not use the pattern
	stmts for the reduction chain.
	(vectorizable_reduction): When the reduction chain is corrupt,
	fail.
	* tree-vect-patterns.c (vect_mark_pattern_stmts): Stop when we
	fail to update the reduction chain.

2019-10-28  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vect_create_epilog_for_reduction): Use
	STMT_VINFO_REDUC_IDX from the actual stmt.
	(vect_transform_reduction): Likewise.
	(vectorizable_reduction): Compute the reduction chain length,
	do not recompute the reduction operand index.  Remove no longer
	necessary restriction for condition reduction chains.

2019-10-28  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/92225
	* config/i386/sse.md (REDUC_SSE_SMINMAX_MODE): Use TARGET_SSE4_2
	condition for V2DImode.

2019-10-28  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (sse_cvtss2si<rex64namesuffix>_2):
	Remove %k operand modifier.
	(*vec_extractv2df_1_sse): Remove %q operand modifier.

2019-10-28  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR rtl-optimization/92007
	* cfgcleanup.c (thread_jump): Add an assertion that we don't
	call it after reload if hot/cold partitioning has been done.
	(class pass_postreload_jump): Rename to
	pass_jump_after_combine.
	(make_pass_postreload_jump): Rename to
	make_pass_jump_after_combine.
	* passes.def(pass_postreload_jump): Move before reload, rename
	to pass_jump_after_combine.
	* tree-pass.h (make_pass_postreload_jump): Rename to
	make_pass_jump_after_combine.

2019-10-25  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/92242
	* ipa-fnsummary.c (ipa_merge_fn_summary_after_inlining): Check
	for missing EDGE_REF
	* ipa-prop.c (update_jump_functions_after_inlining): Likewise.

2019-10-25  Jiufu Guo  <guojiufu@linux.ibm.com>

	PR tree-optimization/88760
	* config/rs6000/rs6000-common.c (rs6000_option_optimization_table):
	Enable -funroll-loops for -O2 and above.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Set
	PARAM_MAX_UNROLL_TIMES to 2 and PARAM_MAX_UNROLLED_INSNS to 20, and
	do not turn on web and rngreg implicitly, if the unroller is not
	explicitly enabled.

2019-10-27  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-prop.c (ipa_propagate_indirect_call_infos): Do not remove
	jump functions.

2019-10-27  Eric Botcazou <ebotcazou@adacore.com>

	* cgraph.c (cgraph_node::rtl_info): Fix cut&pasto in comment.
	* cgraph.h (cgraph_node::rtl_info): Likewise.

2019-10-27  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-cp.c (propagate_constants_across_call): If args are not available
	just drop everything to varying.
	(find_aggregate_values_for_callers_subset): Watch for missing
	edge summary.
	(find_more_scalar_values_for_callers_subs): Likewise.
	* ipa-prop.c (ipa_compute_jump_functions_for_edge,
	update_jump_functions_after_inlining, propagate_controlled_uses):
	Watch for missing summaries.
	(ipa_propagate_indirect_call_infos): Remove summary after propagation
	is finished.
	(ipa_write_node_info): Watch for missing summaries.
	(ipa_read_edge_info): Create new ref.
	(ipa_edge_args_sum_t): Add remove.
	(IPA_EDGE_REF_GET_CREATE): New macro.
	* ipa-fnsummary.c (evaluate_properties_for_edge): Watch for missing
	edge summary.
	(remap_edge_change_prob): Likewise.

2019-10-27  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline-transform.c (inline_call): update function summaries
	after expanidng thunk.

2019-10-27  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-icf.c (sem_function::merge): Update function summaries.
	* ipa-prop.h (ipa_get_param): Do not sanity check for WPA.

2019-10-27  Hongtao Liu  <hongtao.liu@intel.com>

	* config/i386/sse.md (*<sse>_vm<plusminus_insn><mode>3,
	<sse>_vm<multdiv_mnemonic><mode>3): Remove <iptr> since
	operand already has scalar mode.
	(iptr): Remove SF/DF.

2019-10-26  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/91289
	* config/rs6000/rs6000-logue.c (rs6000_emit_allocate_stack): Don't add
	an immediate to r0; use r11 instead.  Save and restore r11 to r0 around
	this.

2019-10-26  Hongtao Liu  <hongtao.liu@intel.com>

	* config/i386/sse.md
	(<sse>_vm<plusminus_insn><mode>3<mask_scalar_name><round_scalar_name>,
	<sse>_vm<multdiv_mnemonic><mode>3<mask_scalar_name><round_scalar_name>,
	<sse>_vmsqrt<mode>2<mask_scalar_name><round_scalar_name>,
	<sse>_vm<code><mode>3<mask_scalar_name><round_saeonly_scalar_name>,
	<sse>_vmmaskcmp<mode>3):
	Change predicates from vector_operand to nonimmediate_operand,
	constraints xBm to xm, since scalar operations don't need
	memory address alignment.
	(avx512f_vmcmp<mode>3<round_saeonly_name>,
	avx512f_vmcmp<mode>3_mask<round_saeonly_name>): Replace
	round_saeonly_nimm_predicate with
	round_saeonly_nimm_scalar_predicate.
	(fmai_vmfmadd_<mode><round_name>, fmai_vmfmsub_<mode><round_name>,
	fmai_vmfnmadd_<mode><round_name>,fmai_vmfnmsub_<mode><round_name>,
	*fmai_fmadd_<mode>, *fmai_fmsub_<mode>,
	*fmai_fnmadd_<mode><round_name>, *fmai_fnmsub_<mode><round_name>,
	avx512f_vmfmadd_<mode>_mask3<round_name>,
	avx512f_vmfmadd_<mode>_maskz_1<round_name>,
	*avx512f_vmfmsub_<mode>_mask<round_name>,
	avx512f_vmfmsub_<mode>_mask3<round_name>,
	*avx512f_vmfmsub_<mode>_maskz_1<round_name>,
	*avx512f_vmfnmadd_<mode>_mask<round_name>,
	*avx512f_vmfnmadd_<mode>_mask3<round_name>,
	*avx512f_vmfnmadd_<mode>_maskz_1<round_name>,
	*avx512f_vmfnmsub_<mode>_mask<round_name>,
	*avx512f_vmfnmsub_<mode>_mask3<round_name>,
	*avx512f_vmfnmsub_<mode>_maskz_1<round_name>,
	cvtusi2<ssescalarmodesuffix>32<round_name>,
	cvtusi2<ssescalarmodesuffix>64<round_name>, ): Replace
	round_nimm_predicate with round_nimm_scalr_predicate.
	(avx512f_sfixupimm<mode><sd_maskz_name><round_saeonly_name>,
	avx512f_sfixupimm<mode>_mask<round_saeonly_name>,
	avx512er_vmrcp28<mode><round_saeonly_name>,
	avx512er_vmrsqrt28<mode><round_saeonly_name>,
	): Replace round_saeonly_nimm_predicate with
	round_saeonly_nimm_scalar_predicate.
	(avx512dq_vmfpclass<mode><mask_scalar_merge_name>): Replace
	vector_operand with nonimmediate_operand.
	* config/i386/subst.md (round_scalar_nimm_predicate,
	round_saeonly_scalar_nimm_predicate): Replace
	vector_operand with nonimmediate_operand.

2019-10-26  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/89071
	* config/i386/i386.md (*rcpsf2_sse): Add
	avx_partial_xmm_update, prefer m constraint for TARGET_AVX.
	(*rsqrtsf2_sse): Ditto.
	(*sqrt<mode>2_sse): Ditto.
	(sse4_1_round<mode>2): separate constraint vm, add
	avx_partail_xmm_update, prefer m constraint for TARGET_AVX.
	* config/i386/sse.md (*sse_vmrcpv4sf2"): New define_insn used
	by pass rpad.
	(*<sse>_vmsqrt<mode>2<mask_scalar_name><round_scalar_name>*):
	Ditto.
	(*sse_vmrsqrtv4sf2): Ditto.
	(*avx512f_rndscale<mode><round_saeonly_name>): Ditto.
	(*sse4_1_round<ssescalarmodesuffix>): Ditto.
	(sse4_1_round<ssescalarmodesuffix>): Add m constraint and
	<iptr> pointer size modifier since vround support memory operand.

2019-10-18  Georg-Johann Lay  <avr@gjlay.de>

	PR target/85969
	* config/avr/gen-avr-mmcu-specs.c (str_prefix_p): Remove unused
	static function.

2019-10-25  Cesar Philippidis <cesar@codesourcery.com>
	    Tobias Burnus  <tobias@codesourcery.com>

	* gimplify.c (oacc_default_clause): Privatize fortran common blocks.
	(omp_notice_variable): Defer the expansion of DECL_VALUE_EXPR for
	common block decls.

2019-10-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92222
	* tree-vect-slp.c (_slp_oprnd_info::first_pattern): Remove.
	(_slp_oprnd_info::second_pattern): Likewise.
	(_slp_oprnd_info::any_pattern): New.
	(vect_create_oprnd_info): Adjust.
	(vect_get_and_check_slp_defs): Compute whether any stmt is
	in a pattern.
	(vect_build_slp_tree_2): Avoid building up a node from scalars
	if any of the operand defs, not just the first, is in a pattern.

2019-10-25  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): Only fail
	swapping if we actually have to modify the IL on a shared stmt.
	(vect_build_slp_tree_2): Never fail swapping on shared stmts
	because we no longer modify the IL.

2019-10-25  Martin Liska  <mliska@suse.cz>

	* tree.c (dump_tree_statistics): Use sorted index 'j' and not 'i'.

2019-10-25  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vectorizable_reduction): Restrict the
	LOOP_VINFO_CAN_FULLY_MASK_P handling to cases that will be
	handled by vect_transform_reduction.  Allow fully-masked loops
	to be used with reduction chains.
	* tree-vect-stmts.c (vectorizable_operation): Handle reduction
	operations in fully-masked loops.
	(vectorizable_condition): Reject EXTRACT_LAST_REDUCTION
	operations in fully-masked loops.

2019-10-25  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vectorizable_reduction): Verify
	STMT_VINFO_REDUC_IDX on the to be vectorized stmts is set up
	correctly.
	* tree-vect-patterns.c (vect_mark_pattern_stmts): Transfer
	STMT_VINFO_REDUC_IDX from the original stmts to the pattern
	stmts.

2019-10-24  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.h (omp_construct_selector_matches): Declare.
	* gimplify.c (struct gimplify_omp_ctx): Add code member.
	(gimplify_call_expr): Call omp_resolve_declare_variant and remap
	called function if needed for flag_openmp.
	(gimplify_scan_omp_clauses): Set ctx->code.
	(omp_construct_selector_matches): New function.
	* omp-general.h (omp_constructor_traits_to_codes,
	omp_context_selector_matches, omp_resolve_declare_variant): Declare.
	* omp-general.c (omp_constructor_traits_to_codes,
	omp_context_selector_matches, omp_resolve_declare_variant): New
	functions.

	* config/arc/arc.c (hwloop_optimize): Add missing space in string
	literal.
	* config/rx/rx.c (rx_print_operand): Likewise.
	* tree-vect-data-refs.c (vect_analyze_data_refs): Likewise.
	* tree-ssa-loop-ch.c (should_duplicate_loop_header_p): Likewise.
	* ipa-sra.c (create_parameter_descriptors, process_scan_results):
	Likewise.
	* genemit.c (emit_c_code): Likewise.
	* plugin.c (try_init_one_plugin): Likewise.  Formatting fix.

2019-10-24  Jan Hubicka  <hubicka@ucw.cz>

	* symbols-summary.h (fast_function_summary<T *, V>::release,
	fast_call_summary<T *, V>::release): Free m_vector.

2019-10-24  Jan Hubicka  <hubicka@ucw.cz>

	* cgraphunit.c (symbol_table::process_new_functions): Call
	ipa_free_size_summary.
	* ipa-cp.c (ipcp_cloning_candidate_p): Update.
	(devirtualization_time_bonus): Update.
	(ipcp_propagate_stage): Update.
	* ipa-fnsummary.c (ipa_size_summaries): New.
	(ipa_fn_summary_alloc): Alloc size summary.
	(dump_ipa_call_summary): Update.
	(ipa_dump_fn_summary): Update.
	(analyze_function_body): Update.
	(compute_fn_summary): Likewise.
	(ipa_get_stack_frame_offset): New function.
	(inline_update_callee_summaries): Do not update frame offsets.
	(ipa_merge_fn_summary_after_inlining): Update frame offsets here;
	remove call and function summary.
	(ipa_update_overall_fn_summary): Update.
	(inline_read_section): Update.
	(ipa_fn_summary_write): Update.
	(ipa_free_fn_summary): Do not remove summaries.
	(ipa_free_size_summary): New.
	(release summary pass): Also run at WPA.
	* ipa-fnsummary.h (ipa_size_summary): Declare.
	(ipa_fn_summary): Remove size, self_size, stack_frame_offset,
	estimated_self_stack_size.
	(ipa_size_summary_t): New type.
	(ipa_size_summaries): Declare.
	(ipa_free_size_summary): Declare.
	(ipa_get_stack_frame_offset): Declare.
	* ipa-icf.c (sem_function::merge): Update.
	* ipa-inline-analysis.c (estimate_size_after_inlining): Update.
	(estimate_growth): Update.
	(growth_likely_positive): Update.
	(clone_inlined_nodes): Update.
	(inline_call): Update.
	* ipa-inline.c (caller_growth_limits): Update.
	(edge_badness): Update.
	(recursive_inlining): Update.
	(inline_small_functions): Update.
	(inline_to_all_callers_1): Update.
	* ipa-prop.h (ipa_edge_args_sum_t): Update comment.

2019-10-24  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/altivec.md (altivec_vavgu<VI_char>): Rename to...
	(uavg<mode>3_ceil): ... This.
	(altivec_vavgs<VI_char>): Rename to...
	(avg<mode>3_ceil): ... This.
	* config/rs6000/rs6000-builtin.def (VAVGUB, VAVGSB, VAVGUH, VAVGSH,
	VAVGUW, VAVGSW): Adjust.

2019-10-24  Nathan Sidwell  <nathan@acm.org>

	* dumpfile.c (dump_begin): Reorder decls to use RAII.

2019-10-24  Martin Liska  <mliska@suse.cz>

	* symbol-summary.h (gt_pch_nx): Mark all functions
	with gcc_unreachable as we do not expect to be called.

2019-10-24  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): For reduction
	chains try harder with operand swapping and instead of
	putting a shifted chain into the reduction operands put
	a repetition of the final reduction op there as if we'd
	reassociate the expression.

2019-10-24  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-reference.c (ipa_reference_optimization_summary_d): Rename
	statics_not_read and statics_not_written to statics_read and
	statics_written respectively.
	(no_module_statics): New static var.
	(ipa_reference_get_not_read_global): Rename to ...
	(ipa_reference_get_read_global): ... this.
	(ipa_reference_get_not_written_global): Rename to ...
	(ipa_reference_get_written_global): ... this.
	(dump_static_vars_set_to_file): Dump no_module_statics.
	(copy_static_var_set): Add for propagation parameter.
	(ipa_init): Initialize no_module_statics.
	(ipa_ref_opt_summary_t::duplicate): Update.
	(ipa_ref_opt_summary_t::remove): Update.
	(propagate): Update.
	(write_node_summary_p): Look correctly for bitmap differences.
	(ipa_reference_write_optimization_summary): Update.
	(ipa_reference_read_optimization_summary): Update.
	* ipa-reference.h
	(ipa_reference_get_not_read_global): Rename to ...
	(ipa_reference_get_read_global): ... this.
	(ipa_reference_get_not_written_global): Rename to ...
	(ipa_reference_get_written_global): ... this.
	* tree-ssa-alias.c (ref_maybe_used_by_call_p_1): Update.
	(call_may_clobber_ref_p_1): Update.

2019-10-24  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_hard_regno_nregs_has_padding): Remove
	and add comment.
	(msp430_hard_regno_nregs_with_padding): Remove.

2019-10-24  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/constraints.md: Allow post_inc for "Ya" constraint.
	* config/msp430/msp430.md (430x_shift_left): Use RLAM when the constant
	shift amount is between 1 and 4.
	(430x_arithmetic_shift_right): Use RRAM when the constant shift amount
	is between 1 and 4.

2019-10-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92205
	* tree-vect-loop.c (vectorizable_reduction): Restrict
	search for alternate vectype_in to lane-reducing patterns
	we support.

2019-10-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92203
	* treee-ssa-sccvn.c (eliminate_dom_walker::eliminate_stmt):
	Skip eliminating conversion stmts inserted by insertion.

2019-10-24  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.c (s390_get_thread_pointer): Use
	gen_get_thread_pointer.
	(s390_expand_split_stack_prologue): Likewise.
	* config/s390/s390.md (UNSPEC_GET_TP): New UNSPEC.
	(*get_tp_31): New 31-bit splitter for UNSPEC_GET_TP.
	(*get_tp_64): New 64-bit splitter for UNSPEC_GET_TP.
	(get_thread_pointer<mode>): Use UNSPEC_GET_TP, use
	parameterized name.

2019-10-24  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_analyze_slp): When reduction group
	SLP discovery fails try to handle the reduction as part
	of SLP reduction discovery.

2019-10-23  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000-protos.h (rs6000_adjust_insn_length): New
	declaration.
	* config/rs6000/rs6000.c (rs6000_insn_cost): Use num_insns insn
	attribute if it exists, rather than the insn size.  If we use the
	insn size, adjust the size to remove the extra size that prefixed
	instructions take.
	(rs6000_adjust_insn_length): New function.
	* config/rs6000/rs6000.h (ADJUST_INSN_LENGTH): New target hook to
	update the instruction sized if prefixed instructions are used.
	* config/rs6000/rs6000.md (prefixed_length attribute): Delete.
	(non_prefixed_length attribute): Delete.
	(num_insns attribute): New insn attribute to return the number of
	instructions.
	(max_prefixed_insns attribute): New insn attribute to return the
	maximum number of prefixed instructions in an insn.
	(length attribute): Do not adjust for prefix instructions here,
	punt to ADJUST_INSN_LENGTH.
	(mov<mode>_64bit): Set max_prefixed_insns and num_insns.
	(movtd_64bit_nodm): Set max_prefixed_insns and num_insns.
	(mov<mode>_ppc64): Set max_prefixed_insns and num_insns.
	* config/rs6000/vsx.md: (vsx_mov<mode>_64bit): Set
	max_prefixed_insns and num_insns.

	* config/rs6000/rs6000.md (mov<mode>_64bit_dm): Reformat.
	(movtd_64bit_nodm): Reformat.
	(mov<mode>_32bit): Reformat.
	(mov<mode>_softfloat): Reformat.
	(FMOVE128_GPR splitter): Reformat.
	(DIFD splitter): Reformat.
	(TI2 splitter): Reformat.
	* config/rs6000/predicates.md (lwa_operand): If the bottom two
	bits of the offset for the memory address are non-zero, use PLWA
	if prefixed instructions are available.

2019-10-23  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-out.c (cmp_symbol_files): Watch for overflow.

2019-10-23  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-reference.c (varpool_removal_hook, ipa_reference_c_finalize): Fix
	previous patch.

2019-10-23  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-out.c (output_constructor): Push CTORS_OUT timevar.
	(cmp_symbol_files): New.
	(lto_output): Copy sections in file order.
	* lto-streamer.h (lto_file_decl_data): Add field order.

2019-10-23  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-reference.h (ipa_reference_var_uid): Move offline.
	* ipa-reference.c (reference_vars_map_t): new type.
	(ipa_reference_vars_map, ipa_reference_vars_uids): New static vars.
	(ipa_reference_var_uid): Implement.
	(varpool_node_hooks): New static var.
	(varpool_removal_hook): New function.
	(is_improper): Do not check bitmap for id==-1
	(get_static_name): Update.
	(ipa_init): Initialize new datastructures.
	(analyze_function): Do not recompute ids.
	(propagate): Free reference_vars_to_consider.
	(stream_out_bitmap): Update.
	(ipa_reference_read_optimization_summary): Update.

2019-10-23  qing zhao  <qing.zhao@oracle.com>

	PR gcov-profile/91971
	* coverage.c (coverage_init): Mangle the full path of filename when
	filename is a absolute path.

2019-10-23  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430-protos.h (msp430_has_hwmult): New.
	* config/msp430/msp430.c (msp430_no_hwmult): Remove.
	(msp430_has_hwmult): New.
	(msp430_output_labelref):
	s/msp430_hwmult_type != MSP430_HWMULT_NONE/msp430_has_hwmult ()/
	* config/msp430/msp430.md (mulhisi3): Likewise.
	(umulhisi3): Likewise.
	(mulsidi3): Likewise.
	(umulsidi3): Likewise.

2019-10-23  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/92074
	* params.def (inline-heuristics-hint-percent): Set to 600.

2019-10-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/65930
	* tree-vect-loop.c (check_reduction_path): Allow conversions
	that only change the sign.
	(vectorizable_reduction): Relax latch def stmts we handle further.

2019-10-23  Jakub Jelinek  <jakub@redhat.com>

	PR debug/90231
	* tree-ssa-loop-ivopts.c (get_debug_computation_at): New function.
	(remove_unused_ivs): Use it instead of get_computation_at.  When
	choosing best candidate, only consider candidates where
	get_debug_computation_at actually returns non-NULL.

2019-10-23  Eric Botcazou  <ebotcazou@adacore.com>

	PR tree-optimization/92131
	* tree-vrp.c (extract_range_from_plus_minus_expr): If the resulting
	range would be symbolic, drop to varying for any explicit overflow
	in the constant part or if neither range is a singleton.

2019-10-23  Martin Liska  <mliska@suse.cz>

	PR middle-end/81669
	* fibonacci_heap.h (fibonacci_node::fibonacci_node):
	Initialize m_data.

2019-10-23  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_emit_approx_sqrt): Use
	int_mode_for_mode rather than mode_for_int_vector for scalars.

2019-10-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92179
	* tree-vect-stmts.c (vectorizable_shift): For shift args
	that are all the same remove type restriction in the SLP case.
	Adjust SLP code to handle converting of the shift arg to
	only apply in case the modes are different.

2019-10-23  Martin Liska  <mliska@suse.cz>

	PR ipa/91969
	* ipa-inline.c (recursive_inlining): Do not print
	when curr->count is not initialized.

2019-10-23  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_build_slp_tree_2): Do not build
	op from scalars in case there's a constant operand in its
	definition.

2019-10-23  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Guard
	against out of range max skip or log values.

2019-10-22  Giuliano Belinassi  <giuliano.belinassi@usp.br>

	* cgraph.c (dump_graphviz): Change name to dump_name

2019-10-22  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (rsbsi_carryin_reg): New pattern.
	* config/arm/arm.c (arm_rtx_costs_internal, case MINUS): Handle
	subtraction from a carry operation.

2019-10-22  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/predicates.md (arm_borrow_operation): Handle CC_ADCmode.

2019-10-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92173
	* tree-vect-loop.c (vectorizable_reduction): If
	vect_transform_reduction cannot handle code-generation try without
	the single-def-use-cycle optimization.  Pass optab_vector to
	optab_for_tree_code to get vector shifts as that's what we'd
	generate.

2019-10-22  Michael Matz  <matz@suse.de>

	PR middle-end/90796
	* gimple-loop-jam.c (any_access_function_variant_p): New function.
	(adjust_unroll_factor): Use it to constrain safety, new parameter.
	(tree_loop_unroll_and_jam): Adjust call and profitable unroll factor.

2019-10-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92173
	* tree-vect-loop.c (vectorizable_reduction): If
	vect_transform_reduction cannot handle code-generation try without
	the single-def-use-cycle optimization.  Pass optab_vector to
	optab_for_tree_code to get vector shifts as that's what we'd
	generate.

2019-10-22  Martin Liska  <mliska@suse.cz>

	* diagnostic-format-json.cc (json_from_expanded_location):
	Use json::integer_number.
	* gcov.c (output_intermediate_json_line): Use new
	json::integer_number.
	(output_json_intermediate_file): Likewise.
	* json.cc (number::print): Move to ...
	(float_number::print): ... this.
	(integer_number::print): New.
	(test_writing_numbers): Move to ...
	(test_writing_float_numbers): ... this.
	(test_writing_integer_numbers): New.
	(json_cc_tests): Register test_writing_integer_numbers.
	* json.h (class value): Add forward declaration
	for float_number and integer_number.
	(enum kind): Add JSON_INTEGER and JSON_FLOAT.
	(class number): Move to ...
	(class float_number): ... this.
	(class integer_number): New.
	* optinfo-emit-json.cc (optrecord_json_writer::impl_location_to_json):
	Use json::integer_number.
	(optrecord_json_writer::location_to_json): Likewise.
	(optrecord_json_writer::profile_count_to_json): Likewise.
	(optrecord_json_writer::pass_to_json): Likewise.

2019-10-22  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-slp.c (vect_slp_bb_region): Check whether
	autodetected_vector_size rather than vector_size is zero.
	* tree-vect-loop.c (vect_analyze_loop): Likewise.
	Set autodetected_vector_size immediately after calling
	vect_analyze_loop_2.  Check for a fatal error before advancing
	next_size.

2019-10-21  Jason Merrill  <jason@redhat.com>

	* lock-and-run.sh: Check for process existence rather than timeout.

2019-10-21  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* expr.c (expand_expr_real_2): Don't widen constant op1 when expanding
	widening multiplication.

2019-10-21  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/iterators.md (t2_binop0): Fix typo in comment.
	* config/arm/arm.md (addsi3_carryin_shift): Simplify selection of the
	type attribute.
	(subsi3_carryin_shift): Separate into register and constant controlled
	alternatives.  Use shift_amount_operand for operand 4.  Set shift
	attribute and simplify type attribute.
	(subsi3_carryin_shift_alt): Likewise.
	(rsbsi3_carryin_shift): Likewise.
	(rsbsi3_carryin_shift_alt): Likewise.
	(andsi_not_shiftsi_si): Enable for TARGET_32BIT.  Separate constant
	and register controlled shifts into distinct alternatives.
	(andsi_not_shiftsi_si_scc_no_reuse): Likewise.
	(andsi_not_shiftsi_si_scc): Likewise.
	(arm_cmpsi_negshiftsi_si): Likewise.
	(not_shiftsi): Remove redundant M constraint from alternative 1.
	(not_shiftsi_compare0): Likewise.
	(arm_cmpsi_insn): Remove redundant alternative 2.
	(cmpsi_shift_swp): Likewise.
	(sub_shiftsi): Likewise.
	(sub_shiftsi_compare0_scratch): Likewise.
	* config/arm/thumb2.md (thumb_andsi_not_shiftsi_si): Delete pattern.
	(thumb2_cmpsi_neg_shiftsi): Likewise.

2019-10-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92162
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Lookup
	STMT_VINFO_REDUC_IDX in reduc_info.
	* tree-vect-stmts.c (vectorizable_condition): Likewise.

2019-10-21  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_slp_tree::ops): New member.
	(SLP_TREE_SCALAR_OPS): New.
	(vect_get_slp_defs): Adjust prototype.
	* tree-vect-slp.c (vect_free_slp_tree): Release
	SLP_TREE_SCALAR_OPS.
	(vect_create_new_slp_node): Initialize it.  New overload for
	initializing by an operands array.
	(_slp_oprnd_info::ops): New member.
	(vect_create_oprnd_info): Initialize it.
	(vect_free_oprnd_info): Release it.
	(vect_get_and_check_slp_defs): Populate the operands array.
	Do not swap operands in the IL when not necessary.
	(vect_build_slp_tree_2): Build SLP nodes for invariant operands.
	Record SLP_TREE_SCALAR_OPS for all invariant nodes.  Also
	swap operands in the operands array.  Do not swap operands in
	the IL.
	(vect_slp_rearrange_stmts): Re-arrange SLP_TREE_SCALAR_OPS as well.
	(vect_gather_slp_loads): Fix.
	(vect_detect_hybrid_slp_stmts): Likewise.
	(vect_slp_analyze_node_operations_1): Search for a internal
	def child for computing reduction SLP_TREE_NUMBER_OF_VEC_STMTS.
	(vect_slp_analyze_node_operations): Skip ops-only stmts for
	the def-type push/pop dance.
	(vect_get_constant_vectors): Compute number_of_vectors here.
	Use SLP_TREE_SCALAR_OPS and simplify greatly.
	(vect_get_slp_vect_defs): Use gimple_get_lhs also for PHIs.
	(vect_get_slp_defs): Simplify greatly.
	* tree-vect-loop.c (vectorize_fold_left_reduction): Simplify.
	(vect_transform_reduction): Likewise.
	* tree-vect-stmts.c (vect_get_vec_defs): Simplify.
	(vectorizable_call): Likewise.
	(vectorizable_operation): Likewise.
	(vectorizable_load): Likewise.
	(vectorizable_condition): Likewise.
	(vectorizable_comparison): Likewise.

2019-10-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92161
	* tree-vect-loop.c (vect_analyze_loop_2): Reset stmts def-type
	for reductions.

2019-10-21  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.md (UNSPEC_RNDR, UNSPEC_RNDRRS): Define.
	(aarch64_rndr): New define_insn.
	(aarch64_rndrrs): Likewise.
	* config/aarch64/aarch64.h (AARCH64_ISA_RNG): Define.
	(TARGET_RNG): Likewise.
	* config/aarch64/aarch64.c (aarch64_expand_builtin): Use IGNORE
	argument.
	* config/aarch64/aarch64-protos.h (aarch64_general_expand_builtin):
	Add fourth argument in prototype.
	* config/aarch64/aarch64-builtins.c (enum aarch64_builtins):
	Add AARCH64_BUILTIN_RNG_RNDR, AARCH64_BUILTIN_RNG_RNDRRS.
	(aarch64_init_rng_builtins): Define.
	(aarch64_general_init_builtins): Call aarch64_init_rng_builtins.
	(aarch64_expand_rng_builtin): Define.
	(aarch64_general_expand_builtin): Use IGNORE argument, handle
	RNG builtins.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Define
	__ARM_FEATURE_RNG when TARGET_RNG.
	* config/aarch64/arm_acle.h (__rndr, __rndrrs): Define.

2019-10-21  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* tree-vect-stmts (ensure_base_align): Only change alignment if new
	alignment is more restrictive.

2019-10-21  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vec_info::vector_size): New member variable.
	(vect_update_max_nunits): Update comment.
	(current_vector_size): Delete.
	* tree-vect-stmts.c (current_vector_size): Likewise.
	(get_vectype_for_scalar_type): Use vec_info::vector_size instead
	of current_vector_size.
	(get_mask_type_for_scalar_type): Likewise.
	* tree-vectorizer.c (try_vectorize_loop_1): Likewise.
	* tree-vect-loop.c (vect_update_vf_for_slp): Likewise.
	(vect_analyze_loop, vect_halve_mask_nunits): Likewise.
	(vect_double_mask_nunits, vect_transform_loop): Likewise.
	* tree-vect-slp.c (can_duplicate_and_interleave_p): Likewise.
	(vect_make_slp_decision, vect_slp_bb_region): Likewise.

2019-10-21  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_double_mask_nunits): Take a vec_info.
	* tree-vect-loop.c (vect_double_mask_nunits): Likewise.
	* tree-vect-stmts.c (supportable_narrowing_operation):  Update call
	accordingly.

2019-10-21  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_halve_mask_nunits): Take a vec_info.
	* tree-vect-loop.c (vect_halve_mask_nunits): Likewise.
	* tree-vect-loop-manip.c (vect_maybe_permute_loop_masks): Update
	call accordingly.
	* tree-vect-stmts.c (supportable_widening_operation): Likewise.

2019-10-21  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop-manip.c (vect_maybe_permute_loop_masks): Take
	a loop_vec_info.
	(vect_set_loop_condition_masked): Update call accordingly.

2019-10-21  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (supportable_narrowing_operation): Take a vec_info.
	* tree-vect-stmts.c (supportable_narrowing_operation): Likewise.
	(simple_integer_narrowing): Update call accordingly.
	(vectorizable_conversion): Likewise.

2019-10-21  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (simple_integer_narrowing): Take a vec_info.
	(vectorizable_call): Update call accordingly.

2019-10-21  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (can_duplicate_and_interleave_p): Take a vec_info.
	* tree-vect-slp.c (can_duplicate_and_interleave_p): Likewise.
	(duplicate_and_interleave): Update call accordingly.
	* tree-vect-loop.c (vectorizable_reduction): Likewise.

2019-10-21  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (duplicate_and_interleave): Take a vec_info.
	* tree-vect-slp.c (duplicate_and_interleave): Likewise.
	(vect_get_constant_vectors): Update call accordingly.
	* tree-vect-loop.c (get_initial_defs_for_reduction): Likewise.

2019-10-21  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (get_vectype_for_scalar_type): Take a vec_info.
	* tree-vect-stmts.c (get_vectype_for_scalar_type): Likewise.
	(vect_prologue_cost_for_slp_op): Update call accordingly.
	(vect_get_vec_def_for_operand, vect_get_gather_scatter_ops)
	(vect_get_strided_load_store_ops, vectorizable_simd_clone_call)
	(vect_supportable_shift, vect_is_simple_cond, vectorizable_comparison)
	(get_mask_type_for_scalar_type): Likewise.
	(vect_get_vector_types_for_stmt): Likewise.
	* tree-vect-data-refs.c (vect_analyze_data_refs): Likewise.
	* tree-vect-loop.c (vect_determine_vectorization_factor): Likewise.
	(get_initial_def_for_reduction, build_vect_cond_expr): Likewise.
	* tree-vect-patterns.c (vect_supportable_direct_optab_p): Likewise.
	(vect_split_statement, vect_convert_input): Likewise.
	(vect_recog_widen_op_pattern, vect_recog_pow_pattern): Likewise.
	(vect_recog_over_widening_pattern, vect_recog_mulhs_pattern): Likewise.
	(vect_recog_average_pattern, vect_recog_cast_forwprop_pattern)
	(vect_recog_rotate_pattern, vect_recog_vector_vector_shift_pattern)
	(vect_synth_mult_by_constant, vect_recog_mult_pattern): Likewise.
	(vect_recog_divmod_pattern, vect_recog_mixed_size_cond_pattern)
	(check_bool_pattern, adjust_bool_pattern_cast, adjust_bool_pattern)
	(search_type_for_mask_1, vect_recog_bool_pattern): Likewise.
	(vect_recog_mask_conversion_pattern): Likewise.
	(vect_add_conversion_to_pattern): Likewise.
	(vect_recog_gather_scatter_pattern): Likewise.
	* tree-vect-slp.c (vect_build_slp_tree_2): Likewise.
	(vect_analyze_slp_instance, vect_get_constant_vectors): Likewise.

2019-10-21  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (get_mask_type_for_scalar_type): Take a vec_info.
	* tree-vect-stmts.c (get_mask_type_for_scalar_type): Likewise.
	(vect_check_load_store_mask): Update call accordingly.
	(vect_get_mask_type_for_stmt): Likewise.
	* tree-vect-patterns.c (check_bool_pattern): Likewise.
	(search_type_for_mask_1, vect_recog_mask_conversion_pattern): Likewise.
	(vect_convert_mask_for_vectype): Likewise.

2019-10-21  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-patterns.c (vect_supportable_direct_optab_p): Take
	a vec_info.
	(vect_recog_dot_prod_pattern): Update call accordingly.
	(vect_recog_sad_pattern, vect_recog_pow_pattern): Likewise.
	(vect_recog_widen_sum_pattern): Likewise.

2019-10-21  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vect_supportable_shift): Take a vec_info.
	* tree-vect-stmts.c (vect_supportable_shift): Likewise.
	* tree-vect-patterns.c (vect_synth_mult_by_constant): Update call
	accordingly.

2019-10-21  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.c (get_vec_alignment_for_array_type): Use
	get_vectype_for_scalar_type_and_size instead of
	get_vectype_for_scalar_type.

2019-10-20  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* common.opt (-fcommon): Fix description.

2019-10-20  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/i386-protos.h (ix86_pre_reload_split): Declare.
	* config/i386/i386.c (ix86_pre_reload_split): New function.
	* config/i386/i386.md (*fix_trunc<mode>_i387_1, *add<mode>3_eq,
	*add<mode>3_ne, *add<mode>3_eq_0, *add<mode>3_ne_0, *add<mode>3_eq,
	*add<mode>3_ne, *add<mode>3_eq_1, *add<mode>3_eq_0, *add<mode>3_ne_0,
	*anddi3_doubleword, *andndi3_doubleword, *<code>di3_doubleword,
	*one_cmpldi2_doubleword, *ashl<dwi>3_doubleword_mask,
	*ashl<dwi>3_doubleword_mask_1, *ashl<mode>3_mask, *ashl<mode>3_mask_1,
	*<shift_insn><mode>3_mask, *<shift_insn><mode>3_mask_1,
	*<shift_insn><dwi>3_doubleword_mask,
	*<shift_insn><dwi>3_doubleword_mask_1, *<rotate_insn><mode>3_mask,
	*<rotate_insn><mode>3_mask_1, *<btsc><mode>_mask, *<btsc><mode>_mask_1,
	*btr<mode>_mask, *btr<mode>_mask_1, *jcc_bt<mode>, *jcc_bt<mode>_1,
	*jcc_bt<mode>_mask, *popcounthi2_1, frndintxf2_<rounding>,
	*fist<mode>2_<rounding>_1, *<code><mode>3_1, *<code>di3_doubleword):
	Use ix86_pre_reload_split instead of can_create_pseudo_p in condition.
	* config/i386/sse.md (*sse4_1_<code>v8qiv8hi2<mask_name>_2,
	*avx2_<code>v8qiv8si2<mask_name>_2,
	*sse4_1_<code>v4qiv4si2<mask_name>_2,
	*sse4_1_<code>v4hiv4si2<mask_name>_2,
	*avx512f_<code>v8qiv8di2<mask_name>_2,
	*avx2_<code>v4qiv4di2<mask_name>_2, *avx2_<code>v4hiv4di2<mask_name>_2,
	*sse4_1_<code>v2hiv2di2<mask_name>_2,
	*sse4_1_<code>v2siv2di2<mask_name>_2, sse4_2_pcmpestr,
	sse4_2_pcmpistr): Likewise.

2019-10-20  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/install.texi (Configuration, --enable-objc-gc): hboehm.info
	now defaults to https.

2019-10-20  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (nonoverlapping_refs_since_match_p): Do not
	skip non-zero array accesses.

2019-10-20  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-slp.c (vect_slp_analyze_bb_1): Take a bb_vec_info
	and return a boolean success value.  Move the allocation and
	initialization of the bb_vec_info to...
	(vect_slp_bb_region): ...here.  Update call accordingly.
	(vect_slp_bb): Apply PARAM_SLP_MAX_INSNS_IN_BB here rather
	than in vect_slp_analyze_bb_1.

2019-10-20  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-slp.c (vect_slp_analyze_bb_1): Call save_datarefs
	when processing the given datarefs for the first time and
	check_datarefs subsequently.
	(vect_slp_bb_region): New function, split out of...
	(vect_slp_bb): ...here.  Don't recompute the region bounds and
	dataref sets when retrying with a different vector size.

2019-10-19  Jakub Jelinek  <jakub@redhat.com>
	    Uroš Bizjak  <ubizjak@gmail.com>

	PR target/92140
	* config/i386/predicates.md (int_nonimmediate_operand): New special
	predicate.
	* config/i386/i386.md (*add<mode>3_eq, *add<mode>3_ne,
	*add<mode>3_eq_0, *add<mode>3_ne_0, *sub<mode>3_eq, *sub<mode>3_ne,
	*sub<mode>3_eq_1, *sub<mode>3_eq_0, *sub<mode>3_ne_0): New
	define_insn_and_split patterns.

2019-10-19  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.md: Delete out--of-date comment about
	special-casing integer loads.

2019-10-19  JeanHeyd Meneide  <phdofthehouse@gmail.com>

	* escaped_string.h (escaped_string): New header.
	* tree.c (escaped_string): Remove escaped_string class.

2019-10-18  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/92157
	* tree-ssa-strlen.c (handle_builtin_string_cmp): Be prepared for
	compute_string_length to return a negative result.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (negv<SIDI:mode>3): New expansion rule.
	(negvsi3, negvdi3): Delete.
	(negdi2_compare): Delete.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (subvdi4): Decompose calculation into 32-bit
	operations.
	(subdi3_compare1): Delete pattern.
	(subvsi3_borrow): New insn pattern.
	(subvsi3_borrow_imm): Likewise.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (subv<mode>4): Delete.
	(subvdi4): New expander pattern.
	(subvsi4): Likewise.  Handle some immediate values.
	(subvsi3_intmin): New insn pattern.
	(subvsi3): Likewise.
	(subvsi3_imm1): Likewise.
	* config/arm/arm.c (select_cc_mode): Also allow minus for CC_V
	idioms.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (usubvdi4): Allow registers or integers for
	incoming operands.  Early split the calculation into SImode
	operations.
	(usubvsi3_borrow): New insn pattern.
	(usubvsi3_borrow_imm): Likewise.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (usubv<mode>4): Delete expansion.
	(usubvsi4): New pattern.  Allow some immediate values for inputs.
	(usubvdi4): New pattern.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.c (arm_select_cc_mode): Allow either the first
	or second operand of the PLUS inside a DImode equality test to be
	sign-extend when selecting CC_Vmode.
	* config/arm/arm.md (addvdi4): Early-split the operation into SImode
	instructions.
	(addsi3_cin_vout_reg, addsi3_cin_vout_imm, addsi3_cin_vout_0): New
	expand patterns.
	(addsi3_cin_vout_reg_insn, addsi3_cin_vout_imm_insn): New patterns.
	(addsi3_cin_vout_0): Likewise.
	(adddi3_compareV): Delete.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (addsi3_compareV_reg_nosum): New insn.
	(addsi3_compareV_imm_nosum): New insn.  Also add peephole2 patterns
	to transform this back into the summation version when that leads
	to smaller code.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (addv<mode>4): Delete.
	(addvsi4): New pattern.  Handle immediate values that the architecture
	supports.
	(addvdi4): New pattern.
	(addsi3_compareV): Rename to ...
	(addsi3_compareV_reg): ... this.  Add constraints for thumb2 variants
	and use COMPARE rather than NE.
	(addsi3_compareV_imm): New pattern.
	* config/arm/arm.c (arm_select_cc_mode): Return CC_Vmode for
	a signed-overflow check.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm-modes.def (CC_ADC): New CC mode.
	* config/arm/arm.c (arm_select_cc_mode): Detect selection of
	CC_ADCmode.
	(maybe_get_arm_condition_code): Handle CC_ADCmode.
	* config/arm/arm.md (uaddvdi4): Early expansion of unsigned addition
	with overflow.
	(addsi3_cin_cout_reg, addsi3_cin_cout_imm, addsi3_cin_cout_0): New
	expand patterns.
	(addsi3_cin_cout_reg_insn, addsi3_cin_cout_0_insn): New insn patterns
	(addsi3_cin_cout_imm_insn): Likewise.
	(adddi3_compareC): Delete insn.
	* config/arm/predicates.md (arm_carry_operation): Handle CC_ADCmode.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (adddi3): Call gen_addsi3_compare_op1.
	* (uaddv<mode>4): Delete expansion pattern.
	(uaddvsi4): New pattern.
	(uaddvdi4): Likewise.
	(addsi3_compareC): Delete pattern, change callers to use
	addsi3_compare_op1.
	(addsi3_compare_op1): No-longer anonymous.  Clean up constraints to
	reduce the number of alternatives and re-work type attribute handling.
	(addsi3_compare_op2): Clean up constraints to reduce the number of
	alternatives and re-work type attribute handling.
	(compare_addsi2_op0): Likewise.
	(compare_addsi2_op1): Likewise.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm-modes.def (CC_NCV, CC_CZ): Delete CC modes.
	* config/arm/arm.c (arm_select_cc_mode): Remove old selection code
	for DImode operands.
	(arm_gen_dicompare_reg): Remove unreachable expansion code.
	(maybe_get_arm_condition_code): Remove support for CC_CZmode and
	CC_NCVmode.
	* config/arm/arm.md (arm_cmpdi_insn): Delete.
	(arm_cmpdi_unsigned): Delete.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.c (arm_const_double_prefer_rsbs_rsc): New function.
	(arm_canonicalize_comparison): For GT/LE/GTU/GEU, use the constant
	unchanged only if that will be cheaper.
	(arm_select_cc_mode): Recognize a swapped comparison that will
	be regenerated using RSBS or RSCS.  Relax restriction on selecting
	CC_RSBmode.
	(arm_gen_dicompare_reg): Handle LE/GT/LEU/GEU comparisons against
	a constant.
	(arm_gen_compare_reg): Handle compare (CONST, X) when the mode
	is CC_RSBmode.
	(maybe_get_arm_condition_code): CC_RSBmode now returns the same codes
	as CCmode.
	* config/arm/arm.md (rsb_imm_compare_scratch): New pattern.
	(rscsi3_<CC_EXTEND>out_scratch): New pattern.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm-modes.def (CC_NV, CC_B): New CC modes.
	* config/arm/arm.c (arm_select_cc_mode): Recognize constructs that
	need these modes.
	(arm_gen_dicompare_reg): New code to early expand the sub-operations
	of EQ, NE, LT, GE, LTU and GEU.
	* config/arm/iterators.md (CC_EXTEND): New code attribute.
	* config/arm/predicates.md (arm_adcimm_operand): New predicate..
	* config/arm/arm.md (cmpsi3_carryin_<CC_EXTEND>out): New pattern.
	(cmpsi3_imm_carryin_<CC_EXTEND>out): Likewise.
	(cmpsi3_0_carryin_<CC_EXTEND>out): Likewise.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (cbranchdi4): Accept reg_or_int_operand for
	operand 2.
	(cstoredi4): Similarly, but for operand 3.
	* config/arm/arm.c (arm_canoncialize_comparison): Allow
	canonicalization of unsigned compares with a constant on Arm.
	Prefer using const+1 and adjusting the comparison over swapping the
	operands whenever the original constant was not valid.
	(arm_gen_dicompare_reg): If Y is not a valid operand, force it to a
	register here.
	(arm_validize_comparison): Do not force invalid DImode operands to
	registers here.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.c (arm_select_cc_mode): For DImode equality tests
	return CC_Zmode if comparing against a constant where one word is
	zero.
	(arm_gen_compare_reg): Split DImode handling to ...
	(arm_gen_dicompare_reg): ... here.  Handle equality comparisons
	against simple constants.
	* config/arm/arm.md (arm_cmpdi_zero): Delete pattern.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (subsi3_carryin_shift_alt): New pattern.
	(rsbsi3_carryin_shift_alt): Likewise.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (negscc_borrow): New pattern.
	(mov_negscc): Don't split if the insn would match negscc_borrow.
	* config/arm/thumb2.md (thumb2_mov_negscc): Likewise.
	(thumb2_mov_negscc_strict_it): Likewise.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.c (arm_insn_cost): New function.
	(TARGET_INSN_COST): Override default definition.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.c (arm_rtx_costs_internal, case MINUS): Handle
	borrow operations.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.c (strip_carry_operation): New function.
	(arm_rtx_costs_internal, case PLUS): Handle addtion with carry-in
	for SImode.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/predicates.md (arm_carry_operation): New special
	predicate.
	* config/arm/iterators.md (LTUGEU): Delete iterator.
	(cnb): Delete code attribute.
	(optab): Delete ltu and geu elements.
	* config/arm/arm.md (addsi3_carryin): Renamed from
	addsi3_carryin_<optab>.  Remove iterator and use arm_carry_operand.
	(add0si3_carryin): Similarly, but from add0si3_carryin_<optab>.
	(addsi3_carryin_alt2): Similarly, but from addsi3_carryin_alt2_<optab>.
	(addsi3_carryin_clobercc): Similarly.
	(addsi3_carryin_shift): Similarly.  Do not allow register shifts in
	Thumb2 state.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (arm_subdi3): Delete insn.
	(zextendsidi_negsi, negdi_extendsidi): Delete insn_and_split.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm-modes.def (CC_RSB): New CC mode.
	* config/arm/predicates.md (arm_borrow_operation): Handle CC_RSBmode.
	* config/arm/arm.c (arm_select_cc_mode): Detect when we should
	return CC_RSBmode.
	(maybe_get_arm_condition_code): Handle CC_RSBmode.
	* config/arm/arm.md (subsi3_carryin): Make this pattern available to
	expand.
	(subdi3): Rewrite to early-expand the sub-operations.
	(rsb_im_compare): New pattern.
	(negdi2): Delete.
	(negdi2_insn): Delete.
	(arm_negsi2): Correct type attribute to alu_imm.
	(negsi2_0compare): New insn pattern.
	(negsi2_carryin): New insn pattern.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (addsi3_carryin_alt2): Use arm_not_operand for
	operand 2.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (addsi3_carryin_shift_<optab>): Reorder operands
	to match canonical form.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (zero_extend<mode>di2): Convert to define_expand.
	(extend<mode>di2): Likewise.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm-protos.h (arm_decompose_di_binop): New prototype.
	* config/arm/arm.c (arm_decompose_di_binop): New function.
	* config/arm/arm.md (adddi3): Also accept any const_int for op2.
	If not generating Thumb-1 code, decompose the operation into 32-bit
	pieces.
	* add0si_carryin_<optab>: New pattern.

2019-10-18  Richard Earnshaw  <rearnsha@arm.com>

	* arm.md (adddi3): Only accept register operands.
	(arm_adddi3): Convert to simple insn with no split.  Do not accept
	constants.
	(adddi_sesidi_di): Delete patern.
	(adddi_zesidi_di): Likewise.
	(uaddv<mode>4): Use LTU as condition for branch.
	(adddi3_compareV): Convert to simple insn with no split.
	(addsi3_compareV_upper): Delete pattern.
	(adddi3_compareC): Convert to simple insn with no split.  Correct
	flags setting expression.
	(addsi3_compareC_upper): Delete pattern.
	(addsi3_compareC): Correct flags setting expression.
	(subdi3_compare1): Convert to simple insn with no split.
	(subsi3_carryin_compare): Delete pattern.
	(arm_subdi3): Convert to simple insn with no split.
	(subdi_zesidi): Delete pattern.
	(subdi_di_sesidi): Delete pattern.
	(subdi_zesidi_di): Delete pattern.
	(subdi_sesidi_di): Delete pattern.
	(subdi_zesidi_zesidi): Delete pattern.
	(negvdi3): Use s_register_operand.
	(negdi2_compare): Convert to simple insn with no split.
	(negdi2_insn): Likewise.
	(negsi2_carryin_compare): Delete pattern.
	(negdi_zero_extendsidi): Delete pattern.
	(arm_cmpdi_insn): Convert to simple insn with no split.
	(negdi2): Don't call gen_negdi2_neon.
	* config/arm/neon.md (adddi3_neon): Delete pattern.
	(subdi3_neon): Delete pattern.
	(negdi2_neon): Delete pattern.
	(splits for negdi2_neon): Delete splits.

2019-10-18  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/92153
	* ggc-page.c (release_pages): Read g->alloc_size before free rather
	than after it.

2019-10-18  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/t-multilib: Add rule to regenerate mutlilib header file
	with any change to t-multilib, t-aprofile and t-rmprofile.  Also add
	new multilib variants and new mappings.

2019-10-18  Georg-Johann Lay  <avr@gjlay.de>

	PR target/86040
	* config/avr/avr.c (avr_out_lpm): Do not shortcut-return.

2019-10-18  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>
	    Richard Sandiford  <richard.sandiford@arm.com>

	PR target/86753
	* tree-vectorizer.h (scalar_cond_masked_key): New struct,
	and define hashmap traits for it.
	(loop_vec_info::scalar_cond_masked_set): New member.
	(vect_record_loop_mask): Adjust prototype.
	* tree-vectorizer.c (scalar_cond_masked_key::get_cond_ops_from_tree):
	Implement method.
	* tree-vect-loop.c (vectorizable_reduction): Pass NULL as last arg to
	vect_record_loop_mask.
	(vectorizable_live_operation): Likewise.
	(vect_record_loop_mask): New param scalar_mask. Add entry
	cond, loop_mask	to scalar_cond_masked_set if scalar_mask is non NULL.
	* tree-vect-stmts.c (check_load_store_masking): New param scalar_mask.
	Pass it as last arg to vect_record_loop_mask.
	(vectorizable_call): Pass scalar_mask as last arg to
	vect_record_loop_mask.
	(vectorizable_store): Likewise.
	(vectorizable_load): Likewise.
	(vectorizable_condition): Check if another part of vectorized code
	applies loop_mask to condition or to it's inverse, and if yes,
	apply loop_mask to result of vector comparison.

2019-10-17  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (pa_output_indirect_call): Fix typos in last change.

2019-10-18  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/92056
	* tree-ssa-strlen.c (determine_min_objsize): Call init_object_sizes
	before calling compute_builtin_object_size.

2019-10-17  Iain Sandoe  <iain@sandoe.co.uk>

	PR target/65342
	* config/rs6000/darwin.md (movdi_low, movsi_low_st): Delete.
	(movdi_low_st): Delete.
	* config/rs6000/rs6000.c
	(darwin_rs6000_legitimate_lo_sum_const_p): New.
	(mem_operand_gpr): Validate Mach-O LO_SUM cases separately.
	* config/rs6000/rs6000.md (movsi_low): Delete.

2019-10-17  Jason Merrill  <jason@redhat.com>

	* gimplify.h (get_initialized_tmp_var): Add default argument to
	post_p.
	* gimplify.c (gimplify_self_mod_expr, gimplify_omp_atomic): Remove
	NULL post_p argument.
	* targhooks (std_gimplify_va_arg_expr): Likewise.

2019-10-17  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_stmt_vec_info::cond_reduc_code): Remove.
	(STMT_VINFO_VEC_COND_REDUC_CODE): Likewise.
	* tree-vectorizer.c (vec_info::new_stmt_vec_info): Do not
	initialize STMT_VINFO_VEC_COND_REDUC_CODE.
	* tree-vect-loop.c (vect_is_simple_reduction): Set
	STMT_VINFO_REDUC_CODE.
	(vectorizable_reduction): Remove dead and redundant code, use
	STMT_VINFO_REDUC_CODE instead of STMT_VINFO_VEC_COND_REDUC_CODE.

2019-10-17  Georg-Johann Lay  <avr@gjlay.de>

	Fix breakage introduced by r276985.

	* config/avr/avr.c (avr_option_override): Remove set of
	PARAM_ALLOW_STORE_DATA_RACES.
	* common/config/avr/avr-common.c (avr_option_optimization_table)
	[OPT_LEVELS_ALL]: Turn on -fallow-store-data-races.

2019-10-17  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386.h (processor_costs): Add clear_ratio.
	(CLEAR_RATIO): Remove MIN and use ix86_cost->clear_ratio.
	* config/i386/x86-tune-costs.h: Set clear_ratio to the minimum
	of 6 and move_ratio in all cost models.

2019-10-17  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (check_reduction_path): Compute reduction
	operation here.
	(vect_is_simple_reduction): Remove special-case of single-stmt
	reduction path detection.

2019-10-17  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm-cpus.in (marvel-pj4): Add +fp to the architecture.

2019-10-17  Yuliang Wang  <yuliang.wang@arm.com>

	* config/aarch64/aarch64-sve2.md (aarch64_sve2_eor3<mode>)
	(aarch64_sve2_nor<mode>, aarch64_sve2_nand<mode>)
	(aarch64_sve2_bsl<mode>, aarch64_sve2_nbsl<mode>)
	(aarch64_sve2_bsl1n<mode>, aarch64_sve2_bsl2n<mode>):
	New combine patterns.
	* config/aarch64/iterators.md (BSL_DUP): New int iterator for the
	above.
	(bsl_1st, bsl_2nd, bsl_dup, bsl_mov): Attributes for the above.

2019-10-17  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (value_range_base::dump): Display +INF for both
	pointers and integers when appropriate.

2019-10-17  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* tree-vect-loop.c (vect_analyze_loop_2): Use same condition to decide
	when to use versioning threshold.

2019-10-17  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* tree-vect-loop.c (determine_peel_for_niter): New function contained
	outlined code from ...
	(vect_analyze_loop_2): ... here.

2019-10-17  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* tree-vect-loop.c (vect_transform_loop): Move code from here...
	* tree-vect-loop-manip.c (vect_loop_versioning): ... to here.
	* tree-vectorizer.h (vect_loop_versioning): Remove unused parameters.

2019-10-17  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (needs_fold_left_reduction_p): Export.
	(vect_is_simple_reduction): Move all validity checks ...
	(vectorizable_reduction): ... here.  Compute whether we
	need a fold-left reduction here.
	* tree-vect-patterns.c (vect_reassociating_reduction_p): Merge
	both overloads, check needs_fold_left_reduction_p directly.
	* tree-vectorizer.h (needs_fold_left_reduction_p): Declare.

2019-10-17  Richard Biener  <rguenther@suse.de>

	* tree-ssa-pre.c (create_component_ref_by_pieces_1): Fix
	TARGET_MEM_REF creation.

2019-10-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92129
	* tree-vect-loop.c (vectorizable_reduction): Also fail
	on GIMPLE_SINGLE_RHS.

2019-10-17  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/92056
	* tree-object-size.c (cond_expr_object_size): Return early if then_
	processing resulted in unknown size.

	PR tree-optimization/92115
	* tree-ssa-ifcombine.c (ifcombine_ifandif): Force condition into
	temporary if it could trap.

2019-10-17  Richard Biener  <rguenther@suse.de>

	PR debug/91887
	* dwarf2out.c (gen_formal_parameter_die): Also try to match
	context_die against a DW_TAG_GNU_formal_parameter_pack parent.

2019-10-16  Jakub Jelinek  <jakub@redhat.com>

	* tree-ssa-strlen.c (maybe_invalidate): Use
	HOST_WIDE_INT_PRINT_UNSIGNED instead of "%zu".

2019-10-16  Andrew Burgess  <andrew.burgess@embecosm.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.h (REG_CLASS_CONTENTS): Add argument passing
	regs to SIBCALL_REGS.
	* config/riscv/riscv.c (riscv_regno_to_class): Change argument
	passing regs to SIBCALL_REGS.

2019-10-16  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/83821
	* tree-ssa-strlen.c (maybe_invalidate): Add argument.  Consider
	the length of a string when available.
	(handle_builtin_memset) Add argument.
	(handle_store, strlen_check_and_optimize_call): Same.
	(check_and_optimize_stmt): Same.  Pass it to callees.

2019-10-16  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/91996
	* tree-ssa-strlen.c (maybe_warn_pointless_strcmp): Improve location
	information.
	(compare_nonzero_chars): Add an overload.
	(count_nonzero_bytes): Add an argument.  Call overload above.
	Handle non-constant lengths in some range.
	(handle_store): Add an argument.
	(check_and_optimize_stmt): Pass an argument to handle_store.

2019-10-16  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.c (neon_valid_immediate): Clear bytes before use.

2019-10-16  Mihailo Stojanovic  <mistojanovic@wavecomp.com>

	* config/mips/mips.c (mips_expand_builtin_insn): Force the
	operands which correspond to the same input-output register to
	have the same pseudo assigned to them.

2019-10-16  Ilya Leoshkevich  <iii@linux.ibm.com>

	* cfgrtl.c (find_partition_fixes): Remove bbs_in_cold_partition.

2019-10-16  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c (aarch64_classify_symbol):
	Apply reasonable limit to symbol offsets.

2019-10-16  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vect_valid_reduction_input_p): Remove.
	(vect_is_simple_reduction): Delay checking to
	vectorizable_reduction and relax the checking.
	(vectorizable_reduction): Check we have a simple use.  Check
	for bogus condition reductions.
	* tree-vect-stmts.c (vect_transform_stmt): Make sure we
	are looking at the last stmt in a pattern sequence when
	filling in backedge PHI values.

2019-10-16  Peter Bergner <bergner@linux.ibm.com>
	    Jiufu Guo  <guojiufu@linux.ibm.com>

	PR target/70010
	* config/rs6000/rs6000.c (rs6000_can_inline_p): Prohibit inlining if
	the callee explicitly disables some isa_flags the caller is using.

2019-10-16  Richard Sandiford  <richard.sandiford@arm.com>

	* function-abi.cc (expr_callee_abi): Assert for POINTER_TYPE_P.

2019-10-16  Richard Sandiford  <richard.sandiford@arm.com>

	* genmodes.c (mode_data::order): New field.
	(blank_mode): Update accordingly.
	(VECTOR_MODES_WITH_PREFIX): Add an order parameter.
	(make_vector_modes): Likewise.
	(VECTOR_MODES): Update use accordingly.
	(cmp_modes): Sort by the new order field ahead of sorting by size.
	* config/aarch64/aarch64-modes.def (VNx2QI, VN2xHI, VNx2SI)
	(VNx4QI, VNx4HI, VNx8QI): New partial vector modes.
	* config/aarch64/aarch64.c (VEC_PARTIAL): New flag value.
	(aarch64_classify_vector_mode): Handle the new partial modes.
	(aarch64_vl_bytes): New function.
	(aarch64_hard_regno_nregs): Use it instead of BYTES_PER_SVE_VECTOR
	when counting the number of registers in an SVE mode.
	(aarch64_class_max_nregs): Likewise.
	(aarch64_hard_regno_mode_ok): Don't allow partial vectors
	in registers yet.
	(aarch64_classify_address): Treat partial vectors analogously
	to full vectors.
	(aarch64_print_address_internal): Consolidate the printing of
	MUL VL addresses, using aarch64_vl_bytes as the number of
	bytes represented by "VL".
	(aarch64_vector_mode_supported_p): Reject partial vector modes.

2019-10-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_layout_frame): Use is_constant
	rather than known_lt when choosing frame layouts.

2019-10-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_layout_frame): Assert
	that all the adjustments add up to the full frame size.
	Use crtl->outgoing_args_size directly as the final adjustment
	where appropriate.

2019-10-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_layout_frame): Use a local
	"frame" reference instead of always referring directly to
	"cfun->machine->frame".

2019-10-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92119
	* tree-vect-patterns.c (vect_recog_rotate_pattern): Guard
	against missing bswap lhs.

2019-10-16  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/92033
	* poly-int.h (constant_lower_bound_with_limit): New function.
	(constant_upper_bound_with_limit): Likewise.
	* doc/poly-int.texi: Document them.
	* tree-vrp.c (value_range_base::set): Convert POLY_INT_CST bounds
	into the worst-case INTEGER_CST bounds.

2019-10-16  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/91088
	* doc/invoke.texi (ipa-max-param-expr-ops): Document new option.
	* params.def (PARAM_IPA_MAX_PARAM_EXPR_OPS): New.
	* ipa-predicat.h (struct expr_eval_op): New struct.
	(expr_eval_ops): New typedef.
	(struct condition): Add type and param_ops fields, remove size field.
	(add_condition): Replace size parameter with type parameter, add
	param_ops parameter.
	* ipa-predicat.c (expr_eval_ops_equal_p): New function.
	(predicate::add_clause): Add comparisons on type and param_ops.
	(dump_condition): Add debug dump for param_ops.
	(remap_after_inlining): Adjust call arguments to add_condition.
	(add_condition): Replace size parameter with type parameter, add
	param_ops parameter. Unshare constant value used in conditions.
	* ipa-fnsummary.c (evaluate_conditions_for_known_args): Fold
	parameter expressions using param_ops.
	(decompose_param_expr):  New function.
	(set_cond_stmt_execution_predicate): Use call to decompose_param_expr
	to replace call to unmodified_parm_or_parm_agg_item.
	(set_switch_stmt_execution_predicate): Likewise.
	(will_be_nonconstant_expr_predicate): Likewise. Replace usage of size
	with type.
	(inline_read_section): Read param_ops from summary stream.
	(ipa_fn_summary_write): Write param_ops to summary stream.

2019-10-15  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/92107
	* genattrtab.c (write_attr_value) <do_operator>: Parenthesize the
	expression written.

2019-10-15  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c: Update description of fix and continue.

2019-10-15  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_binds_local_p): Update to call
	default_binds_local_p_3 () directly. amend comments.

2019-10-15  Richard Biener  <rguenther@suse.de>

	* lto-streamer-out.c (lto_variably_modified_type_p): New.
	(tree_is_indexable): Use it.
	* tree-streamer-out.c (pack_ts_type_common_value_fields):
	Stream variably_modified_type_p as TYPE_LANG_FLAG_0.
	* tree-streamer-in.c (unpack_ts_type_common_value_fields): Likewise.

2019-10-15  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.md (zero_extendqipsi2): New.
	(zero_extendqisi2): Optimize case where src register and base dst
	register are the same.
	(zero_extendhipsi2): Don't use 430X insn for rYs->r case.
	(zero_extendpsisi2): Optimize r->m case.
	Add unnamed insn patterns to catch insns combine searches for when
	optimizing pointer manipulation.

2019-10-15  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.md: Group zero_extend* insns together.

2019-10-15  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/constraints.md: Allow post_inc operand for "Ya"
	constraint.
	* config/msp430/msp430.c (msp430_legitimate_address_p): Handle
	POST_INC.
	(msp430_subreg): Likewise.
	(msp430_split_addsi): Likewise.
	(msp430_print_operand_addr): Likewise.
	* config/msp430/msp430.h (HAVE_POST_INCREMENT): Define.
	(USE_STORE_POST_INCREMENT): Define.
	* config/msp430/msp430.md: Use the msp430_general_dst_operand or
	msp430_general_dst_nonv_operand predicates for the lvalues of insns.
	* config/msp430/predicates.md (msp430_nonpostinc_operand): New.
	(msp430_general_dst_operand): New.
	(msp430_general_dst_nonv_operand): New.
	(msp430_nonsubreg_operand): Remove.
	(msp430_nonsubreg_dst_operand): New.
	(msp430_nonsubreg_or_imm_operand): Allow reg or mem operands in place
	of defunct msp430_nonsubreg_operand.
	(msp430_nonsubregnonpostinc_or_imm_operand): New.

2019-10-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91929
	* tree-ssa-pre.c (pre_expr_d::loc): New member.
	(get_or_alloc_expr_for_name): Initialize it.
	(get_or_alloc_expr_for_constant): Likewise.
	(phi_translate_1): Copy it.
	(create_expression_by_pieces): Use the original location
	of the expression for the inserted stmt.
	(compute_avail): Record the location of the stmt for the
	expressions created.

2019-10-15  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-ssa-strlen.c (count_nonzero_bytes): Check tree_fits_uhwi_p
	before using tree_to_uhwi.

2019-10-15  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.md: Run %a0:DI splitters only after reload.

2019-10-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92094
	* tree-vect-loop.c (vectorizable_reduction): For nested cycles
	do not adjust the reduction definition def type.
	* tree-vect-stmts.c (vect_transform_stmt): Verify the scalar stmt
	defines the latch argument of the PHI.

2019-10-15  Hongyu Wang  <hongtao.wang@intel.com>

	PR target/92035
	* config/i386/avx512fintrin.h (_mm_mask_roundscale_ss,
	_mm_maskz_roundscale_ss, _mm_maskz_roundscale_round_ss,
	_mm_maskz_roundscale_round_ss, _mm_mask_roundscale_sd,
	_mm_maskz_roundscale_sd, _mm_mask_roundscale_round_sd,
	_mm_maskz_roundscale_round_sd): New intrinsics.
	(_mm_roundscale_ss, _mm_roundscale_round_ss): Use
	__builtin_ia32_rndscales?_mask_round builtins instead of
	__builtin_ia32_rndscales?_round.
	* config/i386/i386-builtin.def (__builtin_ia32_rndscaless_round,
	__builtin_ia32_rndscalesd_round): Remove.
	(__builtin_ia32_rndscaless_mask_round,
	__builtin_ia32_rndscalesd_mask_round): New intrinsics.
	* config/i386/sse.md
	(avx512f_rndscale<mode><round_saeonly_name>): Renamed to ...
	(avx512f_rndscale<mode><mask_scalar_name><round_saeonly_scalar_name>):
	 ... this, adjust and add subst atrributes to make it maskable.

2019-10-15  Richard Biener  <rguenther@suse.de>

	PR middle-end/92046
	* common.opt (fallow-store-data-races): New.
	* params.def (PARAM_ALLOW_STORE_DATA_RACES): Remove.
	* params.h (ALLOW_STORE_DATA_RACES): Likewise.
	* doc/invoke.texi (fallow-store-data-races): Document.
	(--param allow-store-data-races): Remove docs.
	* opts.c (default_options_table): Enable -fallow-store-data-races
	at -Ofast.
	(default_options_optimization): Do not enable --param
	allow-store-data-races at -Ofast.
	* tree-if-conv.c (ifcvt_memrefs_wont_trap): Use flag_store_data_races
	instead of PARAM_ALLOW_STORE_DATA_RACES.
	* tree-ssa-loop-im.c (execute_sm): Likewise.

2019-10-15  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR tree-optimization/92085
	* tree-if-conv.c (ifcvt_local_dce): Call gsi_next in else clause,
	instead of calling it unconditionally after
	delete_dead_or_redundant_assignment and fix indentation.

2019-10-15  Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/arm/vfp.md (fma<SDF:mode>4): Enable DF only when
	TARGET_VFP_DOUBLE.
	(*fmsub<SDF:mode>4): Likewise.
	*fnmsub<SDF:mode>4): Likewise.
	(*fnmadd<SDF:mode>4): Likewise.

2019-10-14 Joel Hutton  <Joel.Hutton@arm.com>

	* doc/tree-ssa.texi: Update renamed macro name.

2019-10-14  Mihailo Stojanovic  <mistojanovic@wavecomp.com>

	* config/mips/mips.c (mips_cannot_force_const_mem): Reject
	vector constants.

2019-10-14  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c: Use unsigned ints for the picbase label
	counters, initialise the vars explicitly.
	(update_pic_label_number_if_needed): Move a variable declaration
	to where it's needed.
	(machopic_output_function_base_name): Use a more strict checking
	assert, and and unsigned int for the picbase label counter.
	(machopic_get_function_picbase): Likewise.

2019-10-14  Richard Biener  <rguenther@suse.de>

	PR middle-end/92046
	* dse.c (scan_insn): Use param max_active_local_stores.
	(dse_step1): Get PARAM_MAX_DSE_ACTIVE_LOCAL_STORES and adjust
	based on optimization level.
	* loop-invariant.c (move_loop_invariants): Adjust
	LOOP_INVARIANT_MAX_BBS_IN_LOOP based on optimization level.
	* opts.c (default_options_optimization): Do not adjust
	PARAM_MAX_DSE_ACTIVE_LOCAL_STORES and
	LOOP_INVARIANT_MAX_BBS_IN_LOOP here.

2019-10-14  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/arm.c (arm_legitimize_address): Remove Thumb-2 bailout.

2019-10-14  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/arm.c (arm_option_override): Don't override sched
	pressure algorithm.

2019-10-14  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92069
	* tree-vect-loop.c (vect_analyze_scalar_cycles_1): For nested
	cycles do not set vect_nested_cycle on the latch definition.

2019-10-14  Richard Sandiford  <richard.sandiford@arm.com>

	* function-abi.h (expr_callee_abi): Declare.
	* function-abi.cc (expr_callee_abi): New function.

2019-10-14  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (value_range_base::set): Normalize unsigned ~[0,0]
	into [1,MAX].
	* tree-vrp.h (value_range_base::nonzero_p): Adjust for unsigned
	non-zero being represented as [1,MAX].

2019-10-14  Xiong Hu Luo  <luoxhu@linux.ibm.com>

	* tree-sra.c (dump_access): Add missing braces.

2019-10-13  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (machopic_indirection_name): Rework the
	function to emit linker-visible symbols only for indirections
	in the data section.  Clean up the code and update comments.

2019-10-13  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (machopic_indirect_data_reference): Remove
	redundant code.

2019-10-13  Nathan Sidwell  <nathan@acm.org>

	* gengtype-lex.l (CXX_KEYWORD): Add 'mutable'.

2019-10-13  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* doc/sourcebuild.texi (Test Directives, Add Options): Remove
	c99_runtime.

2019-10-12  Jan Hubicka  <hubicka@ucw.cz>

	* lto-streamer-out.c (collect_block_tree_leafs): Renumber statements
	so non-virutal are before virutals.
	(output_function): Avoid body modifications.

2019-10-12  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (pa_output_call): Load descriptor address to register
	%r22.  Load function address before global pointer.
	(pa_attr_length_indirect_call): Adjust length of inline versions of
	$$dyncall.
	(pa_output_indirect_call): Remove fast inline version of $$dyncall
	before normal cases.  Update inline $$dyncall sequences to preserve
	function descriptor address in register %r22.
	(TRAMPOLINE_CODE_SIZE): Adjust.
	(pa_asm_trampoline_template): Revise 32-bit trampoline.  Don't assume
	register %r22 contains trampoline address.
	(pa_trampoline_init): Adjust offsets.
	(pa_trampoline_adjust_address): Likewise.
	* config/pa/pa.h (TRAMPOLINE_SIZE): Adjust 32-bit size.

2019-10-12  Iain Sandoe  <iain@sandoe.co.uk>

	PR target/67183
	* config/darwin.c (machopic_indirection): New field to flag
	non-lazy-symbol-pointers in the data section.
	(machopic_indirection_name): Compute if an indirection should
	appear in the data section.
	(machopic_output_data_section_indirection): New callback split
	from machopic_output_indirection.
	(machopic_output_stub_indirection): Likewise.
	(machopic_output_indirection): Retain the code for non-lazy
	symbol pointers in their regular section.
	(machopic_finish): Use the new callbacks to order the indirection
	output.

2019-10-12  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-protos.h (machopic_finish): Delete.
	* config/darwin.c (machopic_finish): Make static.

2019-10-12  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_file_end): Only emit empty CTOR/DTOR
	sections when building kernel extension code.

2019-10-12  Palmer Dabbelt  <palmer@sifive.com>

	* doc/extend.texi (Alternate Keywords): Change "-std=c11" to "a
	later standard."

2019-10-12  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (pa_option_override): Remove trailing comma
	from warning.

2019-10-12  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/92063
	* tree-eh.c (operation_could_trap_helper_p) <case COND_EXPR>
	<case VEC_COND_EXPR>: Return false with *handled = false.
	(tree_could_trap_p): For {,VEC_}COND_EXPR return false instead of
	recursing on the first operand.
	* fold-const.c (simple_operand_p_2): Use generic_expr_could_trap_p
	instead of tree_could_trap_p.
	* tree-ssa-sccvn.c (vn_nary_may_trap): Formatting fixes.

2019-10-11  Jim Wilson  <jimw@sifive.com>

	PR rtl-optimization/91860
	* combine.c (subst): If new_rtx is a constant, also check for
	SIGN_EXTEND when deciding whether to call simplify_unary_operation.

2019-10-11  Richard Sandiford  <richard.sandiford@arm.com>

	* expr.c (store_expr): Use rtx_to_poly_int64 rather than
	INTVAL when calling store_bit_field.

2019-10-11  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/arm.h (HONOR_REG_ALLOC_ORDER): Set when optimizing for
	size.

2019-10-11  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* tree-vect-loop.c (vect_analyze_loop_operations): Adjust call to
	vectorizable_live_operation.
	(vectorizable_live_operation): Adjust parameters.
	* tree-vect-stmts.c (vect_init_vector,
	vect_gen_widened_results_half): Fix typo in function comment.
	(can_vectorize_live_stmts): Adjust function comment.
	Adjust parameters.  Adjust call to vectorizable_live_operation.
	(vect_analyze_stmt): Adjust call to can_vectorize_live_stmts.
	(vect_transform_stmt): Adjust function comment.  Adjust call to
	can_vectorize_live_stmts.
	* tree-vectorizer.h (vectorizable_live_operation): Adjust parameters.

2019-10-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90883
	PR tree-optimization/91091
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Use correct
	alias-sets both for recording VN table entries and continuing
	walking after translating through copies.  Handle same-sized
	reads from SSA names by returning the plain SSA name.
	(eliminate_dom_walker::eliminate_stmt): Properly handle
	non-size precision stores in redundant store elimination.

2019-10-11  Jan Hubicka  <hubicka@ucw.cz>

	* ggc-page.c (release_pages): Output statistics when !quiet_flag.
	(ggc_collect): Dump later to not interfere with release_page dump.
	(ggc_trim): New function.
	* ggc-none.c (ggc_trim): New.
	* ggc.h (ggc_trim): Declare.

2019-10-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/92066
	PR tree-optimization/92046
	* tree-vect-data-refs.c (vect_enhance_data_refs_alignment):
	Fix bogus cost model check.

2019-10-11  Tobias Burnus  <tobias@codesourcery.com>

	* langhooks-def.h (LANG_HOOKS_OMP_IS_ALLOCATABLE_OR_PTR): Define.
	(LANG_HOOKS_DECLS): Add it.
	* langhooks.h (lang_hooks_for_decls): Add omp_is_allocatable_or_ptr;
	update comment for omp_is_optional_argument.
	* omp-general.c (omp_is_allocatable_or_ptr): New.
	* omp-general.h (omp_is_allocatable_or_ptr): Declare.
	* omp-low.c (scan_sharing_clauses, lower_omp_target): Handle
	Fortran's optional arguments and allocatable/pointer scalars
	with use_device_addr.

2019-10-11  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/77918
	* config/s390/2827.md: Add new opcodes.
	* config/s390/2964.md: Likewise.
	* config/s390/3906.md: Likewise.
	* config/s390/8561.md: Likewise.
	* config/s390/s390-builtins.def (s390_vfchesb): Use
	the new vec_cmpgev4sf_quiet_nocc.
	(s390_vfchedb): Use the new vec_cmpgev2df_quiet_nocc.
	(s390_vfchsb): Use the new vec_cmpgtv4sf_quiet_nocc.
	(s390_vfchdb): Use the new vec_cmpgtv2df_quiet_nocc.
	(vec_cmplev4sf): Use the new vec_cmplev4sf_quiet_nocc.
	(vec_cmplev2df): Use the new vec_cmplev2df_quiet_nocc.
	(vec_cmpltv4sf): Use the new vec_cmpltv4sf_quiet_nocc.
	(vec_cmpltv2df): Use the new vec_cmpltv2df_quiet_nocc.
	* config/s390/s390-modes.def (CCSFPS): New mode.
	* config/s390/s390.c (s390_match_ccmode_set): Support CCSFPS.
	(s390_select_ccmode): Return CCSFPS for LT, LE, GT, GE and LTGT.
	(s390_branch_condition_mask): Reuse CCS for CCSFPS.
	(s390_expand_vec_compare): Use non-signaling patterns where
	necessary.
	(s390_reverse_condition): Support CCSFPS.
	* config/s390/s390.md (*cmp<mode>_ccsfps): New pattern.
	* config/s390/vector.md: (VFCMP_HW_OP): Remove.
	(asm_fcmp_op): Likewise.
	(*smaxv2df3_vx): Use pattern for quiet comparison.
	(*sminv2df3_vx): Likewise.
	(*vec_cmp<VFCMP_HW_OP:code><mode>_nocc): Remove.
	(*vec_cmpeq<mode>_quiet_nocc): New pattern.
	(vec_cmpgt<mode>_quiet_nocc): Likewise.
	(vec_cmplt<mode>_quiet_nocc): New expander.
	(vec_cmpge<mode>_quiet_nocc): New pattern.
	(vec_cmple<mode>_quiet_nocc): New expander.
	(*vec_cmpeq<mode>_signaling_nocc): New pattern.
	(*vec_cmpgt<mode>_signaling_nocc): Likewise.
	(*vec_cmpgt<mode>_signaling_finite_nocc): Likewise.
	(*vec_cmpge<mode>_signaling_nocc): Likewise.
	(*vec_cmpge<mode>_signaling_finite_nocc): Likewise.
	(vec_cmpungt<mode>): New expander.
	(vec_cmpunge<mode>): Likewise.
	(vec_cmpuneq<mode>): Use quiet patterns.
	(vec_cmpltgt<mode>): Allow only on z14+.
	(vec_cmpordered<mode>): Use quiet patterns.
	(vec_cmpunordered<mode>): Likewise.
	(VEC_CMP_EXPAND): Add ungt and unge.

2019-10-11  Jan Hubicka  <hubicka@ucw.cz>

	* gimple-streamer-out.c (output_gimple_stmt): Add explicit function
	parameter.
	* lto-streamer-out.c: Include tree-dfa.h.
	(output_cfg): Do not use cfun.
	(lto_prepare_function_for_streaming): New.
	(output_function): Do not push cfun; do not initialize loop optimizer.
	* lto-streamer.h (lto_prepare_function_for_streaming): Declare.
	* passes.c (ipa_write_summaries): Use it.
	(ipa_write_optimization_summaries): Do not modify bodies.
	* tree-dfa.c (renumber_gimple_stmt_uids): Add function parameter.
	* tree.dfa.h (renumber_gimple_stmt_uids): Update prototype.
	* tree-ssa-dse.c (pass_dse::execute): Update use of
	renumber_gimple_stmt_uids.
	* tree-ssa-math-opts.c (pass_optimize_widening_mul::execute): Likewise.

2019-10-11  Kewen Lin  <linkw@gcc.gnu.org>

	* config/rs6000/rs6000.c (rs6000_builtin_vectorization_cost): Lower
	vec_promote_demote cost to 1 for non-Power7 VSX architectures.

2019-10-10  Joseph Myers  <joseph@codesourcery.com>

	* ginclude/float.h [!__DEC32_MANT_DIG__]: Do not define DFP
	macros.
	[__STDC_WANT_IEC_60559_DFP_EXT__ || __STDC_VERSION__ > 201710L]:
	Also define DFP macros for these conditions.
	[!__STDC_WANT_DEC_FP__] (DEC32_SUBNORMAL_MIN, DEC64_SUBNORMAL_MIN,
	DEC128_SUBNORMAL_MIN): Do not define.
	[__STDC_WANT_IEC_60559_DFP_EXT__ || __STDC_VERSION__ > 201710L]
	(DEC32_TRUE_MIN, DEC64_TRUE_MIN, DEC128_TRUE_MIN): New macros.

2019-10-10  Xiong Hu Luo  <luoxhu@linux.ibm.com>
	    Sandra Loosemore  <sandra@codesourcery.com>

	PR middle-end/26241
	* doc/lto.texi (IPA): Reference to the IPA passes.
	* doc/passes.texi (Pass manager): Add node IPA passes and
	  description for each IPA pass.

2019-10-10  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-reference.c: Do not include splay-tree.h
	(reference_vars_to_consider): Turn to hash map.
	(get_static_name, ipa_init, analyze_function, propagate,
	stream_out_bitmap, ipa_reference_write_optimization_summary,
	ipa_reference_write_optimization_summary): Update.

2019-10-10  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-reference.c (propagate): Fix releasing of IPA summaries.

2019-10-10  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c: Lookup Objective C metadata and force indirection
	for IVAR refs.

2019-10-10  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (quad_address_p): Add check for prefixed
	addresses.
	(mem_operand_gpr): Add check for prefixed addresses.
	(mem_operand_ds_form): Add check for prefixed addresses.
	(rs6000_legitimate_offset_address_p): If we support prefixed
	addresses, check for a 34-bit offset instead of 16-bit.
	(rs6000_legitimate_address_p): Add check for prefixed addresses.
	Do not allow load/store with update if the address is prefixed.
	(rs6000_mode_dependent_address):  If we support prefixed
	addresses, check for a 34-bit offset instead of 16-bit.

2019-10-10  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/77918
	* config/s390/vector.md (vcond_comparison_operator): New
	predicate.
	(vcond<V_HW:mode><V_HW2:mode>): Use vcond_comparison_operator.

2019-10-10  David Malcolm  <dmalcolm@redhat.com>

	PR 87488
	* Makefile.in (CFLAGS-opts.o): Pass in DOCUMENTATION_ROOT_URL via
	-D.
	* configure.ac (--with-documentation-root-url): New option.
	* configure: Regenerate.
	* diagnostic-format-json.cc (json_end_diagnostic): If there is an
	option URL, add it as a new string field of the diagnostic option.
	* diagnostic.c (diagnostic_initialize): Initialize get_option_url.
	(print_option_information): If get_option_url is non-NULL, call
	it, and if the result is non-NULL, potentially emit an escape
	sequence to markup the option text with the resulting URL.
	* diagnostic.h (diagnostic_context::get_option_url): New callback.
	* doc/invoke.texi (-fdiagnostics-format=): Add "option_url" to
	example of JSON output.
	* opts-diagnostic.h (get_option_url): New decl.
	* opts.c (get_option_url): New function.
	* toplev.c (general_init): Initialize the get_option_url callback.

2019-10-10  David Malcolm  <dmalcolm@redhat.com>

	PR 87488
	* common.opt (fdiagnostics-urls=): New option.
	(diagnostic-url.h): Add SourceInclude.
	(diagnostic_url_rule): New enum.
	* diagnostic-color.c: Include "diagnostic-url.h".
	(diagnostic_urls_enabled_p): New function.
	* diagnostic-url.h: New file.
	* diagnostic.c: Include "diagnostic-url.h".
	(diagnostic_urls_init): New function.
	* diagnostic.h (diagnostic_urls_init): New decl.
	* doc/invoke.texi (Diagnostic Message Formatting Options): Add
	-fdiagnostics-urls to the list.
	(-fdiagnostics-urls): New option.
	* gcc.c (driver_handle_option): Handle OPT_fdiagnostics_urls_.
	(driver::global_initializations): Call diagnostic_urls_init.
	* opts-global.c (init_options_once): Likewise.
	* opts.c (common_handle_option): Handle OPT_fdiagnostics_urls_.
	* pretty-print.c (pretty_printer::pretty_printer): Initialize
	show_urls.
	(pp_begin_url): New function.
	(pp_end_url): New function.
	(selftest::test_urls): New selftest.
	(selftest::pretty_print_c_tests): Call it.
	* pretty-print.h (pretty_printer::show_urls): New field.
	(pp_begin_url): New decl.
	(pp_end_url): New decl.

2019-10-10  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/92022
	* config/alpha/alpha.c (alpha_handle_trap_shadows): Skip DEBUG_INSN.

2019-10-10  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/88630
	* config/sh/sh.h (TARGET_FPU_SH4_300): New macro.
	* config/sh/sh.c (sh_option_override): Enable fsca and fsrra insns
	also for TARGET_FPU_SH4_300.
	(sh_emit_mode_set): Check for TARGET_FPU_SH4_300 instead of
	TARGET_SH4_300.
	* config/sh/sh.md (toggle_pr): Add TARGET_FPU_SH4_300 condition.
	(negsf2): Expand to either negsf2_fpscr or negsf2_no_fpscr.
	(*negsf2_i): Split into ...
	(negsf2_fpscr, negsf2_no_fpscr): ... these new patterns.
	(abssf2): Expand to either abssf2_fpsc or abssf2_no_fpsc.
	(**abssf2_i): Split into ...
	(abssf2_fpscr, abssf2_no_fpscr): ... these new patterns.
	(negdf2): Expand to either negdf2_fpscr or negdf2_no_fpscr.
	(*negdf2_i): Split into ...
	(negdf2_fpscr, negdf2_no_fpscr): ... these new patterns.
	(absdf2): Expand to either absdf2_fpscr or absdf2_no_fpsc.
	(**abssf2_i): Split into ...
	(absdf2_fpscr, absdf2_no_fpscr): ... these new patterns.

2019-10-10  Richard Biener  <rguenther@suse.de>

	PR middle-end/92046
	* opts.c (finish_options): Do not influence global --params
	from options that are adjustable per function.
	* tree-vect-data-refs.c (vect_enhance_data_refs_alignment):
	Apply --param adjustment based on active cost-model.
	* tree-ssa-phiopt.c (cond_if_else_store_replacement): Disable
	further store-sinking when vectorization or if-conversion
	are not enabled.

2019-10-10  Jan Hubicka  <hubicka@ucw.cz>

	PR middle-end/92037
	* cgraph.c (symbol_table_test::symbol_table_test): Use ggc_alloc
	rather than ggc_alloc_cleared to alloc symbol table.
	* toplev.c (general_init): Likewise.
	* cgraph.h (symbol_table): Explicitly construct every field.

2019-10-10  Andreas Krebbel  <krebbel@linux.ibm.com>

	* common/config/s390/s390-common.c (PF_ARCH13): Rename to...
	(PF_Z15): ... this.
	* config.gcc: Add z15 as option for --with-arch and --with-tune
	configure switches.
	* config/s390/s390-c.c (s390_resolve_overloaded_builtin): Add
	error reporting for unsupported builtins.
	* config/s390/s390-opts.h (enum processor_type): Rename
	PROCESSOR_8561_ARCH13 to PROCESSOR_8561_Z15.
	* config/s390/8561.md: Rename arch13 to z15 throughout the file.
	* config/s390/driver-native.c (s390_host_detect_local_cpu):
	Likewise.
	* config/s390/s390-builtins.def: Likewise.
	* config/s390/s390.c (processor_table): Add z15 as option and keep arch13 as alternative.
	(s390_expand_builtin): Add missing check for unsupported builtins.
	(s390_canonicalize_comparison): Rename TARGET_ARCH13 to TARGET_Z15.
	(s390_rtx_costs): Likewise.
	(s390_get_sched_attrmask): Rename arch13 to z15.
	(s390_get_unit_mask): Likewise.
	(s390_is_fpd): Likewise.
	(s390_is_fxd): Likewise.
	* config/s390/s390.h (enum processor_flags): Likewise.
	* config/s390/s390.md: Likewise.
	* config/s390/vector.md: Likewise.
	* config/s390/vx-builtins.md: Likewise.
	* config/s390/s390.opt: Add z15 to processor_type value.

2019-10-10  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/91035
	* config/s390/s390-protos.h (s390_output_split_stack_data): Add
	prototype.
	* config/s390/s390.md (UNSPECV_SPLIT_STACK_DATA): Remove.
	("split_stack_data", "split_stack_call")
	("split_stack_call_<mode>", "split_stack_cond_call")
	("split_stack_cond_call_<mode>"): Remove.
	("@split_stack_call<mode>", "@split_stack_cond_call<mode>"): New
	insn definition.
	* config/s390/s390.c (s390_output_split_stack_data): New function.
	(s390_expand_split_stack_prologue): Use the merged expander.

2019-10-09  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/90879
	* builtins.c (check_access): Avoid using maxbound when null.
	* calls.c (maybe_warn_nonstring_arg): Adjust to get_range_strlen change.
	* doc/invoke.texi (-Wstring-compare): Document new warning option.
	* gimple-fold.c (get_range_strlen_tree): Make setting maxbound
	conditional.
	(get_range_strlen): Overwrite initial maxbound when non-null.
	* gimple-ssa-sprintf.c (get_string_length): Adjust to get_range_strlen
	changes.
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Same.
	(used_only_for_zero_equality): New function.
	(handle_builtin_memcmp): Call it.
	(determine_min_objsize): Return an integer instead of tree.
	(get_len_or_size, strxcmp_eqz_result): New functions.
	(maybe_warn_pointless_strcmp): New function.
	(handle_builtin_string_cmp): Call it.  Fold zero-equality of strcmp
	between a longer string and a smaller array.
	(get_range_strlen_dynamic): Overwrite initial maxbound when non-null.

2019-10-09  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_override_options): Make the check for
	Objective-C ABI version more specific for 64bit code.

2019-10-09  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (machopic_indirect_data_reference): Set flag to
	indicate that the new symbol is an indirection.
	(machopic_indirect_call_target): Likewise.
	* config/darwin.h (MACHO_SYMBOL_FLAG_INDIRECTION): New.
	(MACHO_SYMBOL_INDIRECTION_P): New.
	(MACHO_SYMBOL_FLAG_STATIC): Adjust bit number.

2019-10-08  Jason Merrill  <jason@redhat.com>

	* doc/invoke.texi: Document -fconcepts-ts.

2019-10-09  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vect_is_simple_reduction): Simplify and
	allow stmts other than GIMPLE_ASSIGN in nested cycles.

2019-10-08  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_stmt_vec_info::reduc_vectype_in): New.
	(_stmt_vec_info::force_single_cycle): Likewise.
	(STMT_VINFO_FORCE_SINGLE_CYCLE): New.
	(STMT_VINFO_REDUC_VECTYPE_IN): Likewise.
	* tree-vect-loop.c (vectorizable_reduction): Set
	STMT_VINFO_REDUC_VECTYPE_IN and STMT_VINFO_FORCE_SINGLE_CYCLE.
	(vect_transform_reduction): Use them to remove redundant code.
	(vect_transform_cycle_phi): Likewise.

2019-10-08  Dmitrij Pochepko <dmitrij.pochepko@bell-sw.com>

	PR tree-optimization/90836
	* match.pd (popcount): New pattern.

2019-10-08  Martin Sebor  <msebor@redhat.com>

	PR middle-end/92026
	PR middle-end/92014
	* tree-ssa-strlen.c (count_nonzero_bytes): Avoid recursing for MEM_REF
	again once nbytes has been set.  Set the access size when not yet set.

2019-10-08  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (machopic_select_section): Remove dead code for
	old Objective-C section selection method, replace with unreachable.

2019-10-08  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (machopic_indirect_data_reference): Check for
	required indirections before making direct access to defined
	values.
	(machopic_output_indirection): Place the indirected pointes for
	required indirections into the non-lazy symbol pointers section.
	(darwin_encode_section_info):
	* config/darwin.h (MACHO_SYMBOL_FLAG_MUST_INDIRECT): New.
	(MACHO_SYMBOL_MUST_INDIRECT_P): New.

2019-10-08  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91994
	* config/i386/i386.c (x86_avx_u128_mode_needed): Use SSE_REG
	instead of ALL_SSE_REG to check if function call preserves some
	256-bit SSE registers.

2019-10-08  Tulio Magno Quites Machado Filho  <tuliom@linux.ibm.com>

	* config.gcc: Move -L usage from LINK_OS_EXTRA_SPEC32 and
	LINK_OS_EXTRA_SPEC64 to MD_STARTFILE_PREFIX and
	MD_STARTFILE_PREFIX_1 when using --with-advance-toolchain.

2019-10-08  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_stmt_vec_info::v_reduc_type): Remove.
	(_stmt_vec_info::is_reduc_info): Add.
	(STMT_VINFO_VEC_REDUCTION_TYPE): Remove.
	(vectorizable_condition): Remove.
	(vectorizable_shift): Likewise.
	(vectorizable_reduction): Adjust.
	(info_for_reduction): New.
	* tree-vect-loop.c (vect_force_simple_reduction): Fold into...
	(vect_analyze_scalar_cycles_1): ... here.
	(vect_analyze_loop_operations): Adjust.
	(needs_fold_left_reduction_p): Simplify for single caller.
	(vect_is_simple_reduction): Likewise.  Remove stmt restriction
	for nested cycles not part of double reductions.
	(vect_model_reduction_cost): Pass in the reduction type.
	(info_for_reduction): New function.
	(vect_create_epilog_for_reduction): Use it, access reduction
	meta off the stmt info it returns.  Use STMT_VINFO_REDUC_TYPE
	instead of STMT_VINFO_VEC_REDUCTION_TYPE.
	(vectorize_fold_left_reduction): Remove pointless assert.
	(vectorizable_reduction): Analyze the full reduction when
	visiting the outermost PHI.  Simplify.  Use STMT_VINFO_REDUC_TYPE
	instead of STMT_VINFO_VEC_REDUCTION_TYPE.  Direct reduction
	stmt code-generation to vectorizable_* in most cases.  Verify
	code-generation only for cases handled by
	vect_transform_reductuon.
	(vect_transform_reduction): Use info_for_reduction to get at
	reduction meta.  Simplify.
	(vect_transform_cycle_phi): Likewise.
	(vectorizable_live_operation): Likewise.
	* tree-vect-patterns.c (vect_reassociating_reduction_p): Look
	at the PHI node for STMT_VINFO_REDUC_TYPE.
	* tree-vect-slp.c (vect_schedule_slp_instance): Remove no
	longer necessary code.
	* tree-vect-stmts.c (vectorizable_shift): Make static again.
	(vectorizable_condition): Likewise.  Get at reduction related
	info via info_for_reduction.
	(vect_analyze_stmt): Adjust.
	(vect_transform_stmt): Likewise.
	* tree-vectorizer.c (vec_info::new_stmt_vec_info): Initialize
	STMT_VINFO_REDUC_TYPE instead of STMT_VINFO_VEC_REDUCTION_TYPE.

2019-10-08  Joseph Myers  <joseph@codesourcery.com>

	* doc/invoke.texi (-ffp-int-builtin-inexact): Document
	-fno-fp-int-builtin-inexact default for C2X.

2019-10-07  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>
	    Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91532
	* tree-if-conv.c: Include tree-ssa-dse.h.
	(ifcvt_local_dce): Change param from bb to loop,
	and call dse_classify_store.
	(tree_if_conversion): Pass loop instead of loop->header as arg
	to ifcvt_local_dce.
	* tree-ssa-dse.c: Include tree-ssa-dse.h.
	(delete_dead_or_redundant_assignment): Remove static qualifier from
	declaration, and add prototype in tree-ssa-dse.h.
	(dse_store_status): Move to tree-ssa-dse.h.
	(dse_classify_store): Remove static qualifier and add new tree param
	stop_at_vuse, and add prototype in tree-ssa-dse.h.
	* tree-ssa-dse.h: New header.

2019-10-07  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (machopic_output_indirection): Don't put
	hidden symbol indirections into the .data section, use the
	non-lazy symbol pointers section as normal.
	(darwin_encode_section_info): Record if a symbol is hidden.
	* config/darwin.h (MACHO_SYMBOL_FLAG_HIDDEN_VIS): New.
	(MACHO_SYMBOL_HIDDEN_VIS_P): New.

2019-10-07  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (machopic_symbol_defined_p): Use symbol flag
	predicates instead of accessing bits directly.
	(machopic_indirect_call_target): Likewise.
	(machopic_output_indirection): Likewise.
	(darwin_encode_section_info): Improve description.  Use renamed
	symbol flags.  Use predicate macros for variables and functions.
	* config/darwin.h:
	Rename MACHO_SYMBOL_VARIABLE to MACHO_SYMBOL_FLAG_VARIABLE.
	Rename MACHO_SYMBOL_DEFINED to MACHO_SYMBOL_FLAG_DEFINED.
	Rename MACHO_SYMBOL_STATIC to MACHO_SYMBOL_FLAG_STATIC.
	(MACHO_SYMBOL_VARIABLE_P): New.
	(MACHO_SYMBOL_DEFINED_P):New.
	(MACHO_SYMBOL_STATIC_P): New.
	* config/i386/darwin.h (MACHO_SYMBOL_FLAG_VARIABLE): Delete.
	(SYMBOL_FLAG_SUBT_DEP): New.
	* config/rs6000/darwin.h (SYMBOL_FLAG_SUBT_DEP): New.

2019-10-07  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_file_end): s/msp_/msp430_/
	(msp430_expand_epilogue): Likewise.
	* config/msp430/predicates.md: Likewise.
	* config/msp430/msp430.md: Likewise.
	Replace blocks of 8 spaces with tabs.

2019-10-07  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430-protos.h (msp430_split_addsi): New prototype.
	* config/msp430/msp430.c (msp430_split_addsi): New.
	* config/msp430/msp430.md: Call msp430_split_addsi () instead of using
	a block of C code for splitting addsi.

2019-10-07  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.c (ix86_expand_floorceildf_32,
	ix86_expand_rounddf_32): Reorder functions.
	* config/i386/i386-protos.h: Update.

2019-10-07  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config.in: Regenerate.
	* config/msp430/constraints.md: Fix docstring for "Ys" constraint.
	Add new "Yx" constraint.
	* config/msp430/driver-msp430.c (msp430_propagate_region_opt): New spec
	function.
	* config/msp430/msp430-protos.h (msp430_op_not_in_high_mem): New
	prototype.
	* config/msp430/msp430.c (msp430_option_override): Allow the lower
	code/data region to be selected in the small memory model.
	(msp430_section_attr): Don't warn if the "section" and "lower"
	attributes are used together.
	(msp430_handle_generic_attribute): Likewise.
	(msp430_var_in_low_mem): New function.
	(TARGET_ENCODE_SECTION_INFO): Define.
	(msp430_encode_section_info): New function.
	(gen_prefix): Return early in the small memory model.
	Require TARGET_USE_LOWER_REGION_PREFIX to be set before adding the
	".lower" prefix if -m{code,data}-region=lower have been passed.
	(msp430_output_aligned_decl_common): Emit common symbols when
	-mdata-region=lower is passed unless TARGET_USE_LOWER_REGION_PREFIX is
	set.
	(TARGET_ASM_FILE_END): Define.
	(msp430_file_end): New function.
	(msp430_do_not_relax_short_jumps): Allow relaxation when
	function will be in the lower region.
	(msp430_op_not_in_high_mem): New function.
	(msp430_print_operand): Check "msp430_op_not_in_high_mem" for
	the 'X' operand selector.
	Clarify comment for 'x' operand selector.
	* config/msp430/msp430.h (LINK_SPEC): Propagate
	-m{code,data}-region to the linker via spec function
	msp430_propagate_region_opt.
	(msp430_propagate_region_opt): New prototype.
	(EXTRA_SPEC_FUNCTIONS): Add msp430_propagate_region_opt.
	(SYMBOL_FLAG_LOW_MEM): Define.
	* config/msp430/msp430.md (addsipsi3): Add missing "%X" operand
	selector.
	(zero_extendqihi2): Fix operand number used by "%X" selector.
	(zero_extendqisi2): Likewise.
	(zero_extendhisi2): Likewise.
	(movqi): Use "Yx" constraint in place of "%X" operand selector.
	(movhi): Likewise.
	(addqi3): Likewise.
	(addhi3): Likewise.
	(addsi3): Likewise.
	(addhi3_cy): Likewise.
	(addchi4_cy): Likewise.
	(subqi3): Likewise.
	(subhi3): Likewise.
	(subsi3): Likewise.
	(bic<mode>3): Likewise.
	(and<mode>3): Likewise.
	(ior<mode>3): Likewise.
	(xor<mode>3): Likewise.
	(slli_1): Add missing "%X" operand selector.
	(slll_1): Likewise.
	(slll_2): Likewise.
	(srai_1): Likewise.
	(sral_1): Likewise.
	(sral_2): Likewise.
	(srli_1): Likewise.
	(srll_1): Likewise.
	(cbranchqi4_real): Use "Yx" constraint in place of "%X" operand
	selector.
	(cbranchhi4_real): Likewise.
	(cbranchqi4_reversed): Likewise.
	(cbranchhi4_reversed): Likewise.
	(*bitbranch<mode>4): Likewise.
	(*bitbranch<mode>4_z): Remove unnecessary "%x" operand selector.
	* config/msp430/msp430.opt (mcode-region=): Set default to
	MSP430_REGION_LOWER. Improve docstring.
	(mdata-region=): Likewise.
	(muse-lower-region-prefix): New option.
	* config/msp430/t-msp430 (MULTILIB_OPTIONS): Add
	mdata-region=none multilib.
	(MULTILIB_MATCHES): Set mdata-region={upper,either} to match
	mdata-region=none multilib.
	MULTILIB_EXCEPTIONS: Remove.
	MULTILIB_REQUIRED: Define.
	* configure: Regenerate.
	* configure.ac: Define HAVE_AS_GNU_ATTRIBUTE and
	HAVE_AS_MSPABI_ATTRIBUTE if GAS version >= 2.33.50.
	* doc/extend.texi: Clarify comment for {upper,lower,either}
	function attributes.
	Add separate description for "lower" variable attribute.

2019-10-07  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/77918
	* optabs-tree.c (vcond_icode_p): New function.
	(vcond_eq_icode_p): Likewise.
	(expand_vec_cond_expr_p): Use vcond_icode_p and
	vcond_eq_icode_p.
	* optabs.c (can_vcond_compare_p): New function.
	* optabs.h (can_vcond_compare_p): Likewise.

2019-10-07  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/77918
	* gimple-expr.c (gimple_cond_get_ops_from_tree): Assert that the
	caller passes a non-trapping condition.
	(is_gimple_condexpr): Allow trapping conditions.
	(is_gimple_condexpr_1): New helper function.
	(is_gimple_condexpr_for_cond): New function, acts like old
	is_gimple_condexpr.
	* gimple-expr.h (is_gimple_condexpr_for_cond): New function.
	* gimple.c (gimple_could_trap_p_1): Handle COND_EXPR and
	VEC_COND_EXPR. Fix an issue with statements like i = (fp < 1.).
	* gimplify.c (gimplify_cond_expr): Use
	is_gimple_condexpr_for_cond.
	(gimplify_expr): Allow is_gimple_condexpr_for_cond.
	* tree-eh.c (operation_could_trap_p): Assert on COND_EXPR and
	VEC_COND_EXPR.
	(tree_could_trap_p): Handle COND_EXPR and VEC_COND_EXPR.
	* tree-ssa-forwprop.c (forward_propagate_into_gimple_cond): Use
	is_gimple_condexpr_for_cond, remove pointless tmp check
	(forward_propagate_into_cond): Remove pointless tmp check.

2019-10-07 Vladislav Ivanishin  <vlad@ispras.ru>

	* gimple-iterator.h (gsi_next_nonvirtual_phi): Change the semantics to
	match that of other gsi_next_* functions.  Adjust the comment.
	(gsi_start_nonvirtual_phis): New function.
	* ipa-icf.c (sem_function::compare_phi_node): Update uses of
	gsi_next_nonvirtual_phi accordingly.  (No functional change.)

2019-10-07 Vladislav Ivanishin  <vlad@ispras.ru>

	* doc/invoke.texi (-Wuninitialized): Don't mention the clobbered by
	setjmp situation here.  Fix a verb's ending: "the exact variables or
	elements for which there are warnings depends" -> "... depend".

2019-10-07  Aldy Hernandez  <aldyh@redhat.com>

	* ipa-prop.c (ipa_vr::nonzero_p): Add TYPE_UNSIGNED check.

2019-10-07  Aldy Hernandez  <aldyh@redhat.com>

	* ipa-prop.c (ipa_vr::nonzero_p): New.
	(ipcp_update_vr): Use nonzero_p instead of open-coding check for
	non-zero range.
	* ipa-prop.h (class ipa_vr): Add nonzero_p.
	* tree-vrp.c (range_has_numeric_bounds_p): New.
	(range_int_cst_p): Use range_has_numeric_bounds_p.
	(get_range_op_handler): New.
	(supported_types_p): New.
	(defined_ranges_p): New.
	(drop_undefines_to_varying): New.
	(range_fold_binary_symbolics_p): New.
	(range_fold_unary_symbolics_p): New.
	(range_fold_unary_expr): Extract out into above functions.
	(range_fold_binary_expr): Same.
	(value_range_base::normalize_addresses): New.
	(value_range_base::normalize_symbolics): Normalize addresses.
	* tree-vrp.h (class value_range_base): Add normalize_addresses.

2019-10-07  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (value_range_base::singleton_p): Use
	value_range_base::num_pairs instead of vrp_val_is* to check
	if a range has one sub-range.

2019-10-07  Richard Sandiford  <richard.sandiford@arm.com>

	* ira-lives.c (check_and_make_def_conflict): Handle cases in which
	DEF is not a true earlyclobber but is tied to a specific input
	operand, and so is effectively earlyclobber wrt inputs that have
	different values.
	(make_early_clobber_and_input_conflicts): Pass this case to the above.

2019-10-07  Richard Sandiford  <richard.sandiford@arm.com>

	* machmode.h (opt_mode): Mark constructors with CONSTEXPR.
	(pod_mode): Mark operators likewise.
	(scalar_int_mode): Mark non-default constructors and
	operators with CONSTEXPR.
	(scalar_float_mode, scalar_mode, complex_mode): Likewise.
	(fixed_size_mode): Likewise.

2019-10-07  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/91994
	* config/i386/sse.md (avx_vzeroupper): Turn into a define_expand
	and wrap the unspec_volatile in a parallel.
	(*avx_vzeroupper): New define_insn.  Use a match_parallel around
	the unspec_volatile.
	* config/i386/predicates.md (vzeroupper_pattern): Expect the
	unspec_volatile to be wrapped in a parallel.
	* config/i386/i386-features.c (ix86_add_reg_usage_to_vzeroupper)
	(ix86_add_reg_usage_to_vzerouppers): New functions.
	(rest_of_handle_insert_vzeroupper): Use them to add register
	usage information to the vzeroupper instructions.

2019-10-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91975
	* tree-ssa-loop-ivcanon.c (constant_after_peeling): Consistently
	handle invariants.

2019-10-06  Richard Sandiford  <richard.sandiford@arm.com>

	* var-tracking.c (dataflow_set_clear_at_call): Hoist temporary
	function result outside of EXECUTE_IF_SET_IN_HARD_REG_SET.

2019-10-06  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_override_options): Adjust objective-c
	ABI version error messages to avoid punctuation and contracted
	negations.

2019-10-05  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline.c: Fix type; compute size rather than self_size
	for size of caller function.

2019-10-05  Iain Sandoe  <iain@sandoe.co.uk>

	PR target/59888
	* config/darwin.c (darwin_rodata_section): Add relocation flag,
	choose const_data section for constants with relocations.
	(machopic_select_section): Pass relocation flag to
	darwin_rodata_section ().

2019-10-05  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91734
	* generic-match-head.c: Include fold-const-call.h.
	* match.pd (sqrt(x) cmp c): Check the boundary value and
	in case inexact computation of c*c affects comparison of the boundary,
	turn LT_EXPR into LE_EXPR, GE_EXPR into GT_EXPR, LE_EXPR into LT_EXPR
	or GT_EXPR into GE_EXPR.  Punt for sqrt comparisons against NaN and
	for -frounding-math.  For c2, try the next smaller or larger floating
	point constant depending on comparison code and if it has the same
	sqrt as c2, use it instead of c2.

2019-10-04  Martin Sebor  <msebor@redhat.com>

	PR middle-end/91977
	* tree-ssa-strlen.c (count_nonzero_bytes): Handle assignments with
	MEM_REF right operand.  Avoid failing for MEM_REF assignments from
	uninitialized objects.

2019-10-04  Martin Sebor  <msebor@redhat.com>

	* builtins.c (compute_objsize): Add an argument.
	* tree-object-size.c (addr_object_size): Same.
	(compute_builtin_object_size): Same.
	* tree-object-size.h (compute_builtin_object): Same.

2019-10-04  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline.c (inline_insns_single, inline_insns_auto): Fix typo.

2019-10-04  Rafael Tsuha  <rafael.tsuha@usp.br>

	* match.pd (sinh (x) / cosh (x)): New simplification rule.

2019-10-04  Martin Jambor  <mjambor@suse.cz>

	* tree-ssa-forwprop.c (simplify_builtin_call): Set gimple call
	fntype when switching to calling memcpy instead of memset.

2019-10-04  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* hash-table.h (hash_table::empty_slow): Don't assign
	size_t values to int variables.

2019-10-04  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* expr.c (convert_mode_scalar): Remove shadowing local var.
	(emit_block_move): Rename local vars.
	(block_move_libcall_safe_for_call_parm): Remove shadowing local var.
	(emit_push_insn): Rename local vars.
	(expand_assignment): Fix wrong mode in assign_stack_temp.  Remove
	shadowing local vars.
	(store_constructor): Remove shadowing local vars.  Rename local var.
	(store_field, expand_cond_expr_using_cmove,
	expand_expr_real_2): Remove shadowing local vars.
	(expand_expr_real_1,
	do_store_flag): Remove shadowing local vars.  Rename local vars.

2019-10-04  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* cgraph.h (FOR_EACH_ALIAS): Avoid shadowing the loop variable.

2019-10-04  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* genmatch.c (commutate): Rename local var.
	(lower_cond): Reuse local var.
	(dt_node::gen, dt_node::gen_kids, dt_node::gen_kids_1,
	dt_operand::gen, dt_operand::gen_gimple_expr,
	dt_simplify::gen): Add a param.  Rename generated vars.
	(decision_tree::insert_operand,
	(capture_info::walk_match, capture_info::walk_result,
	capture_info::walk_c_expr): Rename local vars.
	(expr::gen_transform): Rename generated vars.
	Use snprintf.  Rename local vars.
	(capture::gen_transform, dt_operand::get_name,
	dt_operand::gen_opname): Rename generated vars.
	(write_predicate): Adjust call to gen_kids.
	(parser::get_internal_capture_id): Rename generated vars.
	(parser::parse_expr): Rename local vars.
	(parser::parse_if): Remove local var.
	(parser::parse_pattern, add_operator): Rename local vars.

2019-10-04  Joseph Myers  <joseph@codesourcery.com>

	* builtins.def (DEF_C2X_BUILTIN): New macro.
	(exp10, exp10f, exp10l, fabsd32, fabsd64, fabsd128, nand32)
	(nand64, nand128, roundeven, roundevenf, roundevenl, strdup)
	(strndup): Use DEF_C2X_BUILTIN.
	* coretypes.h (enum function_class): Add function_c2x_misc.

2019-10-04  Maya Rashish  <coypu@sdf.org>

	* ira-color.c (update_costs_from_allocno): Call
	ira_init_register_move_cost_if_necessary.

2019-10-04  Jeff Law  <law@redhat.com>

	* config/h8300/h8300.md (cpymemsi): Disable.
	(movmd, movmd_internal_<mode>, movstr, movsd):
	(movstr, movsd, stpcpy_internal_<mode>: Likewise.
	(movmd splitter, movsd splitter): Likewise.

	* range-op.cc (range_tests): Avoid two tests when ints and
	shorts are the same size.

2019-10-04  Richard Biener  <rguenther@suse.de>

	PR lto/91968
	* tree.c (find_decls_types_r): Do not remove LABEL_DECLs from
	BLOCK_VARS.

2019-10-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91982
	* tree-vect-loop.c (vectorizable_live_operation): Also guard
	against EXTRACT_LAST_REDUCTION.
	* tree-vect-stmts.c (vect_transform_stmt): Likewise.

2019-10-04  Aldy Hernandez  <aldyh@redhat.com>

	* range-op.o (value_range_from_overflowed_bounds): Rename from
	adjust_overflow_bound.
	(value_range_with_overflow): Rename from
	create_range_with_overflow.
	(create_possibly_reversed_range): Adjusted for above renames.
	(operator_*::wi_fold): Same.
	(cross_product_operator::wi_cross_productor): Same.

2019-10-04  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* doc/invoke.texi (-Wshadow=global, -Wshadow=local,
	-Wshadow=compatible-local): Fix description.
	Add an example where -Wshadow=compatible-local does not
	warn.

2019-10-03  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.h (MAX_PCREL17F_OFFSET): Adjust.

	* config/pa/pa.c (pa_output_call): Remove 64-bit sibcall sequence.
	(pa_attr_length_call): Adjust length for 64-bit plabel sequence.

2019-10-03  Aaron Sawdey <acsawdey@linux.ibm.com>

	* expr.c (emit_block_move_hints): Slightly cleaner fix to
	can_move_by_pieces issue.

2019-10-03  Iain Sandoe  <iain@sandoe.co.uk>

	PR target/87243
	* config/darwin-driver.c (maybe_get_sysroot_from_sdkroot): New.
	(darwin_driver_init): Use the sysroot provided by SDKROOT when that
	is available and the user has not set one on the command line.

2019-10-03  Dragan Mladjenovic  <dmladjenovic@wavecomp.com>

	PR target/91769
	* config/mips/mips.c (mips_split_move): Use reg_overlap_mentioned_p
	instead of REGNO equality check on addr.reg.

2019-10-03  Jan Hubicka  <hubicka@ucw.cz>

	* params.def (PARAM_INLINE_HEURISTICS_HINT_PERCENT,
	PARAM_INLINE_HEURISTICS_HINT_PERCENT_O2): New.
	* doc/invoke.texi (inline-heuristics-hint-percent,
	inline-heuristics-hint-percent-O2): Document.
	* tree-inline.c (inline_insns_single, inline_insns_auto): Add new
	hint attribute.
	(can_inline_edge_by_limits_p): Use it.

2019-10-03  Richard Sandiford  <richard.sandiford@arm.com>

	* config/arm/arm.c (arm_print_value): Use real_to_decimal
	to print CONST_DOUBLEs.

2019-10-03  Andrea Corallo  <andrea.corallo@arm.com>

	* ipa-cp.c (ipa_cp_c_finalize): Release ipcp_transformation_sum.
	* ipa-prop.c (ipcp_free_transformation_sum): New function.
	* ipa-prop.h (ipcp_free_transformation_sum): Add declaration.

2019-10-03  Aldy Hernandez  <aldyh@redhat.com>

	* Makefile.in (OBJS): Add range.o and range-op.o.
	Remove wide-int-range.o.
	* function-tests.c (test_ranges): New.
	(function_tests_c_tests): Call test_ranges.
	* ipa-cp.c (ipa_vr_operation_and_type_effects): Call
	range_fold_unary_expr instead of extract_range_from_unary_expr.
	* ipa-prop.c (ipa_compute_jump_functions_for_edge): Same.
	* range-op.cc: New file.
	* range-op.h: New file.
	* range.cc: New file.
	* range.h: New file.
	* selftest.h (range_tests): New prototype.
	* ssa.h: Include range.h.
	* tree-vrp.c (value_range_base::value_range_base): New
	constructors.
	(value_range_base::singleton_p): Do not call
	ranges_from_anti_range until sure we will need to.
	(value_range_base::type): Rename gcc_assert to
	gcc_checking_assert.
	(vrp_val_is_max): New argument.
	(vrp_val_is_min): Same.
	(wide_int_range_set_zero_nonzero_bits): Move from
	wide-int-range.cc.
	(extract_range_into_wide_ints): Remove.
	(extract_range_from_multiplicative_op): Remove.
	(extract_range_from_pointer_plus_expr): Abstract POINTER_PLUS code
	from extract_range_from_binary_expr.
	(extract_range_from_plus_minus_expr): Abstract PLUS/MINUS code
	from extract_range_from_binary_expr.
	(extract_range_from_binary_expr): Remove.
	(normalize_for_range_ops): New.
	(range_fold_binary_expr): New.
	(range_fold_unary_expr): New.
	(value_range_base::num_pairs): New.
	(value_range_base::lower_bound): New.
	(value_range_base::upper_bound): New.
	(value_range_base::upper_bound): New.
	(value_range_base::contains_p): New.
	(value_range_base::invert): New.
	(value_range_base::union_): New.
	(value_range_base::intersect): New.
	(range_compatible_p): New.
	(value_range_base::operator==): New.
	(determine_value_range_1): Call range_fold_*expr instead of
	extract_range_from_*expr.
	* tree-vrp.h (class value_range_base): Add new constructors.
	Add methods for union_, intersect, operator==, contains_p,
	num_pairs, lower_bound, upper_bound, invert.
	(vrp_val_is_min): Add handle_pointers argument.
	(vrp_val_is_max): Same.
	(extract_range_from_unary_expr): Remove.
	(extract_range_from_binary_expr): Remove.
	(range_fold_unary_expr): New.
	(range_fold_binary_expr): New.
	* vr-values.c (vr_values::extract_range_from_binary_expr): Call
	range_fold_binary_expr instead of extract_range_from_binary_expr.
	(vr_values::extract_range_basic): Same.
	(vr_values::extract_range_from_unary_expr): Call
	range_fold_unary_expr instead of extract_range_from_unary_expr.
	* wide-int-range.cc: Remove.
	* wide-int-range.h: Remove.

2019-10-02   Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.c (mem_operand_gpr): Use
	SIGNED_16BIT_OFFSET_EXTRA_P macro.
	(mem_operand_ds_form): Use SIGNED_16BIT_OFFSET_EXTRA_P macro.
	(rs6000_mode_dependent_address): Use SIGNED_16BIT_OFFSET_EXTRA_P
	macro.

2019-10-02  Joseph Myers  <joseph@codesourcery.com>

	* ginclude/stdint-gcc.h [__STDC_WANT_IEC_60559_BFP_EXT__]: Change
	condition on WIDTH macros to [__STDC_WANT_IEC_60559_BFP_EXT__ ||
	(__STDC_VERSION__ && __STDC_VERSION__ > 201710L)].
	* glimits.h: Likewise.

2019-10-03  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/91976
	* expr.c (emit_block_move_hints): Don't call can_move_by_pieces if
	size is not CONST_INT_P, set pieces_ok to false in that case.  Simplify
	CONST_INT_P (size) && pieces_ok to pieces_ok.  Formatting fix.

2019-10-02  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/80936
	* builtins.def (bcmp, bcopy, bzero): Declare nonnull.

2019-10-02  Richard Sandiford  <richard.sandiford@arm.com>

	* cgraph.c (cgraph_node::rtl_info): Use SET_HARD_REG_SET
	instead of reg_class_contents[ALL_REGS].

2019-09-30  Jason Merrill  <jason@redhat.com>

	Add some hash_map_safe_* functions like vec_safe_*.
	* hash-map.h (default_hash_map_size): New variable.
	(create_ggc): Use it as default argument.
	(hash_map_maybe_create, hash_map_safe_get)
	(hash_map_safe_get_or_insert, hash_map_safe_put): New fns.

2019-10-02  Jan Hubicka  <hubicka@ucw.cz>

	* cif-code.def (MAX_INLINE_INSNS_SINGLE_O2_LIMIT,
	MAX_INLINE_INSNS_AUTO_O2_LIMIT): New.
	* ipa-inline.c (inline_insns_single, inline_insns_auto): New functions.
	(can_inline_edge_by_limits_p): Use it.
	(big_speedup_p): Use PARAM_INLINE_MIN_SPEEDUP_O2.
	(want_inline_small_function_p): Use O2 bounds.
	(edge_badness): LIkewise.
	* opts.c (default_options): Add OPT_finline_functions.
	* params.def (PARAM_INLINE_MIN_SPEEDUP_O2,
	PARAM_MAX_INLINE_INSNS_SINGLE_O2, PARAM_MAX_INLINE_INSNS_AUTO_O2):
	New parameters.
	* doc/invoke.texi (-finline-functions): Update documentation.
	(max-inline-insns-single-O2, max-inline-insns-auto-O2,
	inline-min-speedup-O2): Document.
	(early-inlining-insns-O2): Simplify docs.

2019-10-02  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/87047
	* ifcvt.c (average_cost): New static function.  Use it...
	(noce_process_if_block): ... here.

2019-10-02  Aaron Sawdey <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000-protos.h (expand_block_move): Change prototype.
	* config/rs6000/rs6000-string.c (expand_block_move): Add
	might_overlap parm.
	* config/rs6000/rs6000.md (movmemsi): Add new pattern.
	(cpymemsi): Add might_overlap parm to expand_block_move() call.

2019-10-02  Aaron Sawdey <acsawdey@linux.ibm.com>

	* builtins.c (expand_builtin_memory_copy_args): Add might_overlap parm.
	(expand_builtin_memcpy): Use might_overlap parm.
	(expand_builtin_mempcpy_args): Use might_overlap parm.
	(expand_builtin_memmove): Call expand_builtin_memory_copy_args.
	(expand_builtin_memory_copy_args): Add might_overlap parm.
	* expr.c (emit_block_move_via_cpymem): Rename to
	emit_block_move_via_pattern, add might_overlap parm, use cpymem
	or movmem optab as appropriate.
	(emit_block_move_hints): Add might_overlap parm, do the right
	thing for might_overlap==true.
	* expr.h (emit_block_move_hints): Update prototype.

2019-10-02  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-eh.h (unsplit_eh_edges): Declare.
	* tree-eh.c (maybe_remove_unreachable_handlers): Detect more cases.
	(unsplit_eh_edges): New function wrapping unsplit_all_eh.
	* gimple-ssa-store-merging.c: Include cfganal.h cfgcleanup.h except.h.
	(struct store_immediate_info): Add lp_nr field.
	(store_immediate_info::store_immediate_info): Add NR2 parameter and
	initialize lp_nr with it.
	(struct merged_store_group): Add lp_nr and only_constants fields.
	(merged_store_group::merged_store_group): Initialize them.
	(merged_store_group::can_be_merged_into): Deal with them.
	(pass_store_merging): Rename terminate_and_release_chain into
	terminate_and_process_chain.
	(pass_store_merging::terminate_and_process_all_chains): Adjust to above
	renaming and remove useless assertions.
	(pass_store_merging::terminate_all_aliasing_chains): Small tweak.
	(stmts_may_clobber_ref_p): Be prepared for different basic blocks.
	(imm_store_chain_info::coalesce_immediate_stores): Use only_constants
	instead of always recomputing it and compare lp_nr.
	(imm_store_chain_info::output_merged_store): If the group is in an
	active EH region, register new stores if they can throw.  Moreover,
	if the insertion has created new basic blocks, adjust the PHI nodes
	of the post landing pad.
	(imm_store_chain_info::output_merged_stores): If the original stores
	are in an active EH region, deregister them.
	(lhs_valid_for_store_merging_p): Prettify.
	(adjust_bit_pos): New function extracted from...
	(mem_valid_for_store_merging): ...here.  Use it for the base address
	and also for the offset if it is the addition of a constant.
	(lp_nr_for_store): New function.
	(pass_store_merging::process_store): Change return type to bool.
	Call lp_nr_for_store to initialize the store info.  Propagate the
	return status of various called functions to the return value.
	(store_valid_for_store_merging_p): New predicate.
	(enum basic_block_status): New enumeration.
	(get_status_for_store_merging): New function.
	(pass_store_merging::execute): If the function can throw and catch
	non-call exceptions, unsplit the EH edges on entry and clean up the
	CFG on exit if something changed.  Call get_status_for_store_merging
	for every basic block and keep the chains open across basic blocks
	when possible.  Terminate and process open chains at the end, if any.

2019-10-02  Richard Sandiford  <richard.sandiford@arm.com>

	* reginfo.c (globalize_reg): Fix shadowed variable in
	function_abis walk.

2019-10-02  Martin Jambor  <mjambor@suse.cz>

	* cgraph.c (symbol_table::create_edge): New parameter cloning_p,
	do not compute some stuff when set.
	(cgraph_node::create_edge): Likewise.
	(cgraph_node::create_indirect_edge): Renamed last parameter to
	coning_p and flipped its meaning, don't even calculate
	inline_failed when set.
	* cgraph.h (cgraph_node::create_edge): Add new parameter.
	(symbol_table::::create_edge): Likewise.
	(cgraph_node::create_indirect_edge): Rename last parameter, flip
	the default value.
	* cgraphclones.c (cgraph_edge::clone): Pass true cloning_p to all
	call graph edge creating functions.

2019-10-01  Jan Hubicka  <hubicka@ucw.cz>

	PR c++/91222
	* ipa-devirt.c (warn_types_mismatch): Fix conditional on anonymous
	namespace types.

2019-10-02  Shahab Vahedi  <shahab@synopsys.com>

	* config/arc/arc.h (ASM_SPEC): Pass -mcode-density.

2019-10-02  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vect_transform_reduction): Declare.
	* tree-vect-stmts.c (vect_transform_stmt): Use it.
	* tree-vect-loop.c (vectorizable_reduction): Split out reduction
	stmt transform to ...
	(vect_transform_reduction): ... this.

2019-10-02  Tobias Burnus  <tobias@codesourcery.com>

	* omp-low.c (lower_omp_target): Dereference optional argument
	to work with the right pointer.

2019-10-02  Kwok Cheung Yeung  <kcy@codesourcery.com>

	* langhooks-def.h (LANG_HOOKS_OMP_IS_OPTIONAL_ARGUMENT): Default to
	false.
	(LANG_HOOKS_DECLS): Add LANG_HOOKS_OMP_IS_OPTIONAL_ARGUMENT.
	* langhooks.h (omp_is_optional_argument): New hook.
	* omp-general.c (omp_is_optional_argument): New.
	* omp-general.h (omp_is_optional_argument): New declaration.
	* omp-low.c (lower_omp_target): Create temporary for received value
	and take the address for new_var if the original variable was a
	DECL_BY_REFERENCE.  Use size of referenced object when a
	pass-by-reference optional argument used as argument to firstprivate.

2019-10-02  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91940
	* tree-vect-patterns.c: Include tree-vector-builder.h and
	vec-perm-indices.h.
	(vect_recog_rotate_pattern): Also handle __builtin_bswap16, either by
	unpromoting the argument back to uint16_t, or by converting into a
	rotate, or into shifts plus ior.

2019-10-02  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (stmt_vec_info_type::cycle_phi_info_type):
	New.
	(vect_transform_cycle_phi): Declare.
	* tree-vect-stmts.c (vect_transform_stmt): Call
	vect_transform_cycle_phi.
	* tree-vect-loop.c (vectorizable_reduction): Split out
	PHI transformation stage to ...
	(vect_transform_cycle_phi): ... here.

2019-10-02  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/91957
	* lra-lives.c (make_hard_regno_dead): Don't record conflicts for
	eliminable registers.
	(make_hard_regno_live): Likewise, and don't make them live.

2019-10-01  David Malcolm  <dmalcolm@redhat.com>

	* diagnostic-show-locus.c (layout::print_gap_in_line_numbering):
	Call pp_emit_prefix.
	(layout::print_source_line): Likewise.
	(layout::start_annotation_line): Likewise.
	(diagnostic_show_locus): Remove call to temporarily clear the
	prefix.
	(selftest::test_one_liner_fixit_remove): Add test coverage for the
	interaction of pp_set_prefix with rulers and fix-it hints.
	* diagnostic.c (default_diagnostic_finalizer): Temporarily clear
	prefix when calling diagnostic_show_locus, rather than destroying
	it afterwards.
	(print_parseable_fixits): Temporarily clear prefix.
	* pretty-print.c (pp_format): Save and restore line_length, rather
	than assuming it is zero.
	(pp_output_formatted_text): Remove assertion that line_length is
	zero.

2019-10-01  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (nonoverlapping_component_refs_since_match_p):
	Rename to ...
	(nonoverlapping_refs_since_match_p): ... this; handle also
	ARRAY_REFs.
	(alias_stats): Update stats.
	(dump_alias_stats): Likewise.
	(cheap_array_ref_low_bound): New function.
	(aliasing_matching_component_refs_p): Add partial_overlap
	argument;
	pass it to nonoverlapping_refs_since_match_p.
	(aliasing_component_refs_walk): Update call of
	aliasing_matching_component_refs_p
	(nonoverlapping_array_refs_p): New function.
	(decl_refs_may_alias_p, indirect_ref_may_alias_decl_p,
	indirect_refs_may_alias_p): Update calls of
	nonoverlapping_refs_since_match_p.

2019-10-01  Maya Rashish  <coypu@sdf.org>

	PR target/85401
	* ira-color.c (allocno_copy_cost_saving): Call
	ira_init_register_move_cost_if_necessary.

2019-10-01  Maciej W. Rozycki  <macro@wdc.com>

	* Makefile.in (gnat_install_lib): New variable.
	* configure.ac: Substitute it.
	* configure: Regenerate.

2019-10-01  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/91222
	* ipa-devirt.c (warn_types_mismatch): Do not ICE when anonymous type
	is matched with non-C++ type

2019-10-01  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	* tree-if-conv.c (tree_if_conversion): Move call to ifcvt_local_dce
	after local CSE.

2019-10-01  Jan Hubicka  <hubicka@ucw.cz>

	* doc/invoke.texi (early-inlining-insns-O2): Document.
	(early-inlining-insns): Update.
	* params.def (early-inlining-insns-O2): New bound.
	(early-inlining-insns): Update docs.
	* ipa-inline.c (want_early_inline_function_p): Use new bound.

2019-10-01  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/88562
	* config/sh/sh.c (sh_extending_set_of_reg::use_as_extended_reg): Use
	sh_check_add_incdec_notes to preserve REG_INC notes when replacing
	a memory access insn.

2019-10-01  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000-p8swap.c (rtx_is_swappable_p): Don't swap
	vpmsumd.

2019-10-01  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/77918
	* config/s390/s390.c (s390_expand_vec_compare): Use
	gen_vec_cmpordered and gen_vec_cmpunordered.
	* config/s390/vector.md (vec_cmpuneq, vec_cmpltgt, vec_ordered,
	vec_unordered): Delete.
	(vec_ordered<mode>): Rename to vec_cmpordered<mode>.
	(vec_unordered<mode>): Rename to vec_cmpunordered<mode>.
	(VEC_CMP_EXPAND): New iterator for the generic dispatcher.
	(vec_cmp<code>): Generic dispatcher.

2019-10-01  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/77918
	* config/s390/vector.md (V_HW): Add V1TI in order to make
	vcond$a$b generate vcondv1tiv1tf.

2019-10-01  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/91948
	* ira-build.c (ira_create_allocno): Initialize
	ALLOCNO_CROSSED_CALLS_ABIS.
	* ira-color.c (allocno_reload_assign): Pass hard_regno rather
	than regno to ira_need_caller_save_p.

2019-10-01  Alexandre Oliva <oliva@adacore.com>

	* config/i386/i386-options.c
	(ix86_recompute_optlev_based_flags): New, moved out of...
	(ix86_option_override_internal): ... this.  Call it.
	(ix86_override_options_after_change): Call it here too.

	PR debug/91507
	* dwarf2out.c (override_type_for_decl_p): New.
	(gen_variable_die): Use it.

2019-10-01  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vectorizable_reduction): Move variables
	to where they are used.

2019-10-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* regrename.c (hide_operands): Use pc_rtx instead of cc0_rtx.
	(build_def_use): Use PC instead of CC0 in a comment.

2019-10-01  Richard Sandiford  <richard.sandiford@arm.com>

	* rtl.def (CLOBBER_HIGH): Delete.
	* doc/rtl.texi (clobber_high): Remove documentation.
	* rtl.h (SET_DEST): Remove CLOBBER_HIGH from the list of codes.
	(reg_is_clobbered_by_clobber_high): Delete.
	(gen_hard_reg_clobber_high): Likewise.
	* alias.c (record_set): Remove CLOBBER_HIGH handling.
	* cfgexpand.c (expand_gimple_stmt): Likewise.
	* combine-stack-adj.c (single_set_for_csa): Likewise.
	* combine.c (find_single_use_1, set_nonzero_bits_and_sign_copies)
	(can_combine_p, is_parallel_of_n_reg_sets, try_combine)
	(record_dead_and_set_regs_1, reg_dead_at_p_1): Likewise.
	* cse.c (invalidate_reg): Remove clobber_high parameter.
	(invalidate): Update call accordingly.
	(canonicalize_insn): Remove CLOBBER_HIGH handling.
	(invalidate_from_clobbers, invalidate_from_sets_and_clobbers)
	(count_reg_usage, insn_live_p): Likewise.
	* cselib.h (cselib_invalidate_rtx): Remove sett argument.
	* cselib.c (cselib_invalidate_regno, cselib_invalidate_rtx): Likewise.
	(cselib_invalidate_rtx_note_stores): Update call accordingly.
	(cselib_expand_value_rtx_1): Remove CLOBBER_HIGH handling.
	(cselib_invalidate_regno, cselib_process_insn): Likewise.
	* dce.c (deletable_insn_p, mark_nonreg_stores_1): Likewise.
	(mark_nonreg_stores_2): Likewise.
	* df-scan.c (df_find_hard_reg_defs, df_uses_record): Likewise.
	(df_get_call_refs): Likewise.
	* dwarf2out.c (mem_loc_descriptor): Likewise.
	* emit-rtl.c (verify_rtx_sharing): Likewise.
	(copy_insn_1, copy_rtx_if_shared_1): Likewise.
	(hard_reg_clobbers_high, gen_hard_reg_clobber_high): Delete.
	* genconfig.c (walk_insn_part): Remove CLOBBER_HIGH handling.
	* genemit.c (gen_exp, gen_insn): Likewise.
	* genrecog.c (validate_pattern, remove_clobbers): Likewise.
	* haifa-sched.c (haifa_classify_rtx): Likewise.
	* ira-build.c (create_insn_allocnos): Likewise.
	* ira-costs.c (scan_one_insn): Likewise.
	* ira.c (equiv_init_movable_p, memref_referenced_p): Likewise.
	(rtx_moveable_p, interesting_dest_for_shprep): Likewise.
	* jump.c (mark_jump_label_1): Likewise.
	* lra-int.h (lra_insn_reg::clobber_high): Delete.
	* lra-eliminations.c (lra_eliminate_regs_1): Remove CLOBBER_HIGH
	handling.
	(mark_not_eliminable): Likewise.
	* lra-lives.c (process_bb_lives): Likewise.
	* lra.c (new_insn_reg): Remove clobber_high parameter.
	(collect_non_operand_hard_regs): Likewise.  Update call to new
	insn_reg.  Remove CLOBBER_HIGH handling.
	(lra_set_insn_recog_data): Remove CLOBBER_HIGH handling.  Update call
	to collect_non_operand_hard_regs.
	(add_regs_to_insn_regno_info): Remove CLOBBER_HIGH handling.
	Update call to new_insn_reg.
	(lra_update_insn_regno_info): Remove CLOBBER_HIGH handling.
	* postreload.c (reload_cse_simplify, reload_combine_note_use)
	(move2add_note_store): Likewise.
	* print-rtl.c (print_pattern): Likewise.
	* recog.c (store_data_bypass_p_1, store_data_bypass_p): Likewise.
	(if_test_bypass_p): Likewise.
	* regcprop.c (kill_clobbered_value, kill_set_value): Likewise.
	* reginfo.c (reg_scan_mark_refs): Likewise.
	* reload1.c (maybe_fix_stack_asms, eliminate_regs_1): Likewise.
	(elimination_effects, mark_not_eliminable, scan_paradoxical_subregs)
	(forget_old_reloads_1): Likewise.
	* reorg.c (find_end_label, try_merge_delay_insns, redundant_insn)
	(own_thread_p, fill_simple_delay_slots, fill_slots_from_thread)
	(dbr_schedule): Likewise.
	* resource.c (update_live_status, mark_referenced_resources)
	(mark_set_resources): Likewise.
	* rtl.c (copy_rtx): Likewise.
	* rtlanal.c (reg_referenced_p, set_of_1, single_set_2, noop_move_p)
	(note_pattern_stores): Likewise.
	(reg_is_clobbered_by_clobber_high): Delete.
	* sched-deps.c (sched_analyze_reg, sched_analyze_insn): Remove
	CLOBBER_HIGH handling.

2019-10-01  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/91452
	* config/aarch64/aarch64.h (ARM_PCS_TLSDESC): New arm_pcs.
	* config/aarch64/aarch64-protos.h (aarch64_tlsdesc_abi_id): Declare.
	* config/aarch64/aarch64.c (aarch64_hard_regno_call_part_clobbered):
	Handle ARM_PCS_TLSDESC.
	(aarch64_tlsdesc_abi_id): New function.
	* config/aarch64/aarch64.md (tlsdesc_small_sve_<mode>): Use a call
	rtx instead of a list of clobbers and clobber_highs.
	(tlsdesc_small_<mode>): Update accordingly.

2019-10-01  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_expand_call): Take an
	extra callee_abi argument.
	* config/aarch64/aarch64.c (aarch64_expand_call): Likewise.
	Insert a CALLEE_ABI unspec into the call pattern as the second
	element in the PARALLEL.
	(aarch64_simd_call_p): Delete.
	(aarch64_insn_callee_abi): Get the arm_pcs of the callee from
	the new CALLEE_ABI element of the PARALLEL.
	(aarch64_init_cumulative_args): Get the arm_pcs of the callee
	from the function type, if given.
	(aarch64_function_arg_advance): Handle ARM_PCS_SIMD.
	(aarch64_function_arg): Likewise.  Return the arm_pcs of the callee
	when passed the function_arg_info end marker.
	(aarch64_output_mi_thunk): Pass the arm_pcs of the callee as the
	final argument of gen_sibcall.
	* config/aarch64/aarch64.md (UNSPEC_CALLEE_ABI): New unspec.
	(call): Make operand 2 a const_int_operand and pass it to expand_call.
	Wrap it in an UNSPEC_CALLEE_ABI unspec for the dummy define_expand
	pattern.
	(call_value): Likewise operand 3.
	(sibcall): Likewise operand 2.  Place the unspec before rather than
	after the return.
	(sibcall_value): Likewise operand 3.
	(*call_insn, *call_value_insn): Include an UNSPEC_CALLEE_ABI.
	(tlsgd_small_<mode>, *tlsgd_small_<mode>): Likewise.
	(*sibcall_insn, *sibcall_value_insn): Likewise.  Remove empty
	constraint strings.
	(untyped_call): Pass const0_rtx as the callee ABI to gen_call.

2019-10-01  Richard Sandiford  <richard.sandiford@arm.com>

	* regs.h (HARD_REGNO_CALLER_SAVE_MODE): Update call to
	choose_hard_reg_mode.
	* config/sparc/sparc.h (HARD_REGNO_CALLER_SAVE_MODE): Likewise.

2019-10-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* doc/md.texi (vec_pack_trunc_@var{m}): Fix typo.
	(vec_pack_sfix_trunc_@var{m}, vec_pack_ufix_trunc_@var{m}): Ditto.
	(vec_packs_float_@var{m}, vec_packu_float_@var{m}): Ditto.

2019-09-30  David Malcolm  <dmalcolm@redhat.com>

	* diagnostic-show-locus.c (line_label::line_label): Initialize
	m_has_vbar.
	(line_label::comparator): Reverse the sort order by m_state_idx,
	so that when the list is walked backwards the labels appear in
	order of insertion into the rich_location.
	(line_label::m_has_vbar): New field.
	(layout::print_any_labels): When dealing with multiple labels at
	the same line and column, only print vertical bars for the one
	with the highest label_line.
	(selftest::test_one_liner_labels): Update test for multiple labels
	to expect the labels to be in the order of insertion into the
	rich_location.  Add a test for many such labels, where the column
	numbers are out-of-order relative to the insertion order.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* config/i386/i386.h (ix86_frame::expensive_p): New field.
	(ix86_frame::expensive_count): Likewise.
	* config/i386/i386.c (ix86_compute_frame_layout): Make the choice
	of use_fast_prologue_epilogue robust against incidental changes
	in function size.

2019-09-30  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/77918
	* config/s390/vector.md (vec_unordered<mode>): Call
	gen_vec_ordered<mode>.

2019-09-30  Yuliang Wang  <yuliang.wang@arm.com>

	* config/aarch64/aarch64-sve.md (sdiv_pow2<mode>3):
	New pattern for ASRD.
	* config/aarch64/iterators.md (UNSPEC_ASRD): New unspec.
	* internal-fn.def (IFN_DIV_POW2): New internal function.
	* optabs.def (sdiv_pow2_optab): New optab.
	* tree-vect-patterns.c (vect_recog_divmod_pattern):
	Modify pattern to support new operation.
	* doc/md.texi (sdiv_pow2$var{m3}): Documentation for the above.
	* doc/sourcebuild.texi (vect_sdiv_pow2_si):
	Document new target selector.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_layout_frame): Use crtl->abi
	to test whether we're compiling a vector PCS function and to test
	whether the function needs to save a particular register.
	Remove the vector PCS handling of df_set_regs_ever_live.
	(aarch64_components_for_bb): Use crtl->abi to test whether
	the function needs to save a particular register.
	(aarch64_process_components): Use crtl->abi to test whether
	we're compiling a vector PCS function.
	(aarch64_expand_prologue, aarch64_expand_epilogue): Likewise.
	(aarch64_epilogue_uses): Remove handling of vector PCS functions.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_use_simple_return_insn_p):
	Delete.
	* config/aarch64/aarch64.c (aarch64_components_for_bb): Check
	whether the block calls a function that clobbers more registers
	than the current function is allowed to.
	(aarch64_use_simple_return_insn_p): Delete.
	* config/aarch64/aarch64.md (simple_return): Remove condition.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* function-abi.h (function_abi_aggregator): New class.
	* function-abi.cc (function_abi_aggregator::caller_save_regs): New
	function.
	* ira.c (update_equiv_regs_prescan): New function.  Call
	set_paradoxical_subreg here rather than...
	(update_equiv_regs): ...here.
	(ira): Call update_equiv_regs_prescan.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (regs_invalidated_by_call): Only define if
	IN_TARGET_CODE.
	(call_used_or_fixed_regs): Likewise.
	(call_used_or_fixed_reg_p): Likewise.
	* reginfo.c (regs_invalidated_by_call): New macro.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* shrink-wrap.c: Include function-abi.h.
	(requires_stack_frame_p): Use crtl->abi to test whether the
	current function can use a register without saving it first.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* sel-sched-ir.h (_def::crosses_call): Replace with...
	(_def::crossed_call_abis): ..this new field.
	(def_list_add): Take a mask of ABIs instead of a crosses_call
	boolean.
	* sel-sched-ir.c (def_list_add): Likewise.  Update initialization
	of _def accordingly.
	* sel-sched.c: Include function-abi.h.
	(hard_regs_data::regs_for_call_clobbered): Delete.
	(reg_rename::crosses_call): Replace with...
	(reg_rename::crossed_call_abis): ...this new field.
	(fur_static_params::crosses_call): Replace with...
	(fur_static_params::crossed_call_abis): ...this new field.
	(init_regs_for_mode): Don't initialize sel_hrd.regs_for_call_clobbered.
	(init_hard_regs_data): Use crtl->abi to test which registers the
	current function would need to save before it uses them.
	(mark_unavailable_hard_regs): Update handling of call-clobbered
	registers, using call_clobbers_in_region to find out which registers
	might be call-clobbered (but without taking -fipa-ra into account
	for now).  Remove separate handling of partially call-clobbered
	registers.
	(verify_target_availability): Use crossed_call_abis instead of
	crosses_call.
	(get_spec_check_type_for_insn, find_used_regs): Likewise.
	(fur_orig_expr_found, fur_on_enter, fur_orig_expr_not_found): Likewise.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* sched-deps.c (deps_analyze_insn): Use the ABI of the target
	function to test whether a register is fully or partly clobbered.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* rtlanal.c: Include function-abi.h.
	(reg_set_p): Use insn_callee_abi to get the ABI of the called
	function and clobbers_reg_p to test whether the register
	is call-clobbered.
	(find_all_hard_reg_sets): When implicit is true, use insn_callee_abi
	to get the ABI of the called function and full_reg_clobbers to
	get the set of fully call-clobbered registers.  Warn about the
	pitfalls of using this mode.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* reload.c: Include function-abi.h.
	(find_equiv_reg): Use clobbers_reg_p to test whether either
	of the equivalent registers is clobbered by a call.
	* reload1.c: Include function-abi.h.
	(reg_reloaded_call_part_clobbered): Delete.
	(reload): Use crtl->abi to test which registers would need
	saving in the prologue before use.
	(find_reg): Likewise.
	(emit_reload_insns): Remove code for reg_reloaded_call_part_clobbered.
	(reload_as_needed): Likewise.  Use full_and_partial_reg_clobbers
	instead of call_used_or_fixed_regs | reg_reloaded_call_part_clobbered.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* regrename.h (du_head::call_clobber_mask): New field.
	(du_head::need_caller_save_reg): Replace with...
	(du_head::call_abis): ...this new field.
	* regrename.c: Include function-abi.h.
	(call_clobbered_in_chain_p): New function.
	(check_new_reg_p): Use crtl->abi when deciding whether a register
	is free for use after RA.  Use call_clobbered_in_chain_p to test
	whether a candidate register would be clobbered by a call.
	(find_rename_reg): Don't add call-clobber conflicts here.
	(rename_chains): Check call_abis instead of need_caller_save_reg.
	(merge_chains): Update for changes to du_head.
	(build_def_use): Use insn_callee_abi to get the ABI of the call insn
	target.  Record the ABI identifier in call_abis and the set of
	fully or partially clobbered registers in call_clobber_mask.
	Add fully-clobbered registers to hard_conflicts here rather
	than in find_rename_reg.
	* config/aarch64/cortex-a57-fma-steering.c: Include function-abi.h.
	(rename_single_chain): Check call_abis instead of need_caller_save_reg.
	* config/aarch64/falkor-tag-collision-avoidance.c: Include
	function-abi.h.
	* config/c6x/c6x.c: Likewise.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* regcprop.c (copyprop_hardreg_forward_1): Use the recorded
	mode of the register when deciding whether it is no longer
	available after a call.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* recog.c: Include function-abi.h.
	(peep2_find_free_register): Use crtl->abi when deciding whether
	a register is free for use after RA.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* postreload-gcse.c: Include regs.h and function-abi.h.
	(record_opr_changes): Use insn_callee_abi to get the ABI of the
	call insn target.  Conservatively assume that partially-clobbered
	registers are altered.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* postreload.c (reload_combine_recognize_pattern): Use crtl->abi
	when deciding whether a register is free for use after RA.
	(reload_combine): Remove unnecessary use of fixed_reg_set.
	(reload_cse_move2add): Use insn_callee_abi to get the ABI of the
	call insn target.  Use reg_mode when testing whether a register
	is no longer available.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (return_call_with_max_clobbers): Delete.
	* doc/tm.texi.in (TARGET_RETURN_CALL_WITH_MAX_CLOBBERS): Delete.
	* doc/tm.texi: Regenerate.
	* config/aarch64/aarch64.c (aarch64_return_call_with_max_clobbers)
	(TARGET_RETURN_CALL_WITH_MAX_CLOBBERS): Delete.
	* lra-int.h (lra_reg::actual_call_used_reg_set): Delete.
	(lra_reg::call_insn): Delete.
	* lra.c: Include function-abi.h.
	(initialize_lra_reg_info_element): Don't initialize the fields above.
	(lra): Use crtl->abi to test whether the current function needs to
	save a register in the prologue.  Remove special pre-inheritance
	lra_create_live_ranges pass for flag_ipa_ra.
	* lra-assigns.c: Include function-abi.h
	(find_hard_regno_for_1): Use crtl->abi to test whether the current
	function needs to save a register in the prologue.
	(lra_assign): Assert that registers aren't allocated to a
	conflicting register, rather than checking only for overlaps
	with call_used_or_fixed_regs.  Do this even for flag_ipa_ra,
	and for registers that are not live across a call.
	* lra-constraints.c (last_call_for_abi): New variable.
	(full_and_partial_call_clobbers): Likewise.
	(setup_next_usage_insn): Remove the register from
	full_and_partial_call_clobbers.
	(need_for_call_save_p): Use call_clobbered_in_region_p to test
	whether the register needs a caller save.
	(need_for_split_p): Use full_and_partial_reg_clobbers instead
	of call_used_or_fixed_regs.
	(inherit_in_ebb): Initialize and maintain last_call_for_abi and
	full_and_partial_call_clobbers.
	* lra-lives.c (check_pseudos_live_through_calls): Replace
	last_call_used_reg_set and call_insn arguments with an abi argument.
	Remove handling of lra_reg::call_insn.  Use function_abi::mode_clobbers
	as the set of conflicting registers.
	(calls_have_same_clobbers_p): Delete.
	(process_bb_lives): Track the ABI of the last call instead of an
	insn/HARD_REG_SET pair.  Update calls to
	check_pseudos_live_through_calls.  Use eh_edge_abi to calculate
	the set of registers that could be clobbered by an EH edge.
	Include partially-clobbered as well as fully-clobbered registers.
	(lra_create_live_ranges_1): Don't initialize lra_reg::call_insn.
	* lra-remat.c: Include function-abi.h.
	(call_used_regs_arr_len, call_used_regs_arr): Delete.
	(set_bb_regs): Use insn_callee_abi to get the set of call-clobbered
	registers and bitmap_view to combine them into dead_regs.
	(call_used_input_regno_present_p): Take a function_abi argument
	and use it to test whether a register is call-clobbered.
	(calculate_gen_cands): Use insn_callee_abi to get the ABI of the
	call insn target.  Update tje call to call_used_input_regno_present_p.
	(do_remat): Likewise.
	(lra_remat): Remove the initialization of call_used_regs_arr_len
	and call_used_regs_arr.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* loop-iv.c: Include regs.h and function-abi.h.
	(simplify_using_initial_values): Use insn_callee_abi to get the
	ABI of the call insn target.  Conservatively assume that
	partially-clobbered registers are altered.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* function-abi.h (call_clobbers_in_region): Declare.
	(call_clobbered_in_region_p): New function.
	* function-abi.cc (call_clobbers_in_region): Likewise.
	* ira-int.h: Include function-abi.h.
	(ira_allocno::crossed_calls_abis): New field.
	(ALLOCNO_CROSSED_CALLS_ABIS): New macro.
	(ira_need_caller_save_regs): New function.
	(ira_need_caller_save_p): Likewise.
	* ira.c (setup_reg_renumber): Use ira_need_caller_save_p instead
	of call_used_or_fixed_regs.
	(do_reload): Use crtl->abi to test whether the current function
	needs to save a register in the prologue.  Count registers that
	need to be saved rather than registers that don't.
	* ira-build.c (create_cap_allocno): Copy ALLOCNO_CROSSED_CALLS_ABIS.
	Remove unnecessary | from ALLOCNO_CROSSED_CALLS_CLOBBERED_REGS.
	(propagate_allocno_info): Merge ALLOCNO_CROSSED_CALLS_ABIS too.
	(propagate_some_info_from_allocno): Likewise.
	(copy_info_to_removed_store_destinations): Likewise.
	(ira_flattening): Say that ALLOCNO_CROSSED_CALLS_ABIS and
	ALLOCNO_CROSSED_CALLS_CLOBBERED_REGS are handled conservatively.
	(ira_build): Use ira_need_caller_save_regs instead of
	call_used_or_fixed_regs.
	* ira-color.c (calculate_saved_nregs): Use crtl->abi to test
	whether the current function would need to save a register
	before using it.
	(calculate_spill_cost): Likewise.
	(allocno_reload_assign): Use ira_need_caller_save_regs and
	ira_need_caller_save_p instead of call_used_or_fixed_regs.
	* ira-conflicts.c (ira_build_conflicts): Use
	ira_need_caller_save_regs rather than call_used_or_fixed_regs
	as the set of call-clobbered registers.  Remove the
	call_used_or_fixed_regs mask from the calculation of
	temp_hard_reg_set and mask its use instead.  Remove special
	handling of partially-clobbered registers.
	* ira-costs.c (ira_tune_allocno_costs): Use ira_need_caller_save_p.
	* ira-lives.c (process_bb_node_lives): Use mode_clobbers to
	calculate the set of conflicting registers for calls that
	can throw.  Record the ABIs of calls in ALLOCNO_CROSSED_CALLS_ABIS.
	Use full_and_partial_reg_clobbers rather than full_reg_clobbers
	for the calculation of ALLOCNO_CROSSED_CALLS_CLOBBERED_REGS.
	Use eh_edge_abi to calculate the set of registers that could
	be clobbered by an EH edge.  Include partially-clobbered as
	well as fully-clobbered registers.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* haifa-sched.c: Include function-abi.h.
	(alloc_global_sched_pressure_data): Use crtl->abi to check whether
	the function would need to save a register before using it.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* gcse.c: Include function-abi.h.
	(compute_hash_table_work): Use insn_callee_abi to get the ABI of
	the call insn target.  Invalidate partially call-clobbered
	registers as well as fully call-clobbered ones.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* function.c (aggregate_value_p): Work out which ABI the
	function is using before testing which registers are at least
	partly preserved by a call.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* early-remat.c: Include regs.h and function-abi.h.
	(early_remat::maybe_add_candidate): Don't check for call-clobbered
	registers here.
	(early_remat::restrict_remat_for_unavail_regs): New function.
	(early_remat::restrict_remat_for_call): Likewise.
	(early_remat::process_block): Before calling emit_remat_insns
	for a previous call in the block, invalidate any candidates
	that would clobber call-preserved registers.
	(early_remat::emit_remat_insns_for_block): Likewise for the
	final call in a block.  Do the same thing for live-in registers
	when calling emit_remat_insns at the head of a block.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* df-scan.c (df_get_entry_block_def_set): Use crtl->abi to test
	whether the current function needs to save at least part of a
	register before using it.
	(df_get_exit_block_use_set): Likewise for epilogue restores.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* df-problems.c: Include regs.h and function-abi.h.
	(df_rd_problem_data): Rename sparse_invalidated_by_call to
	sparse_invalidated_by_eh and dense_invalidated_by_call to
	dense_invalidated_by_eh.
	(df_print_bb_index): Update accordingly.
	(df_rd_alloc, df_rd_start_dump, df_rd_confluence_n): Likewise.
	(df_lr_confluence_n): Use eh_edge_abi to get the set of registers
	that are clobbered by an EH edge.  Clobber partially-clobbered
	registers as well as fully-clobbered ones.
	(df_md_confluence_n): Likewise.
	(df_rd_local_compute): Likewise.  Update for changes to
	df_rd_problem_data.
	* df-scan.c (df_scan_start_dump): Use eh_edge_abi to get the set
	of registers that are clobbered by an EH edge.  Includde partially-
	clobbered registers as well as fully-clobbered ones.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* cselib.c (cselib_process_insn): If we know what mode a
	register was set in, check whether it is clobbered in that
	mode by a call.  Only fall back to reg_raw_mode if that fails.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* cse.c: Include regs.h and function-abi.h.
	(invalidate_for_call): Take the call insn as an argument.
	Use insn_callee_abi to get the ABI of the call and invalidate
	partially clobbered registers as well as fully clobbered ones.
	(cse_insn): Update call accordingly.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* combine.c: Include function-abi.h.
	(record_dead_and_set_regs): Use insn_callee_abi to get the ABI
	of the target of call insns.  Invalidate partially-clobbered
	registers as well as fully-clobbered ones.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* cfgloopanal.c: Include regs.h and function-abi.h.
	(init_set_costs): Use default_function_abi to test whether
	a general register is call-clobbered.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* cfgcleanup.c (old_insns_match_p): Compare the ABIs of calls
	instead of the call-clobbered sets.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* caller-save.c (setup_save_areas): Remove redundant |s of
	fixed_reg_set.
	(save_call_clobbered_regs): Likewise.  Use the call ABI rather
	than call_used_or_fixed_regs to decide whether a REG_RETURNED
	value is useful.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* rtl.h (predefined_function_abi): Declare.
	(choose_hard_reg_mode): Take a pointer to a predefined_function_abi
	instead of a boolean call_save flag.
	* config/gcn/gcn.c (gcn_hard_regno_caller_save_mode): Update call
	accordingly.
	* config/i386/i386.h (HARD_REGNO_CALLER_SAVE_MODE): Likewise.
	* config/ia64/ia64.h (HARD_REGNO_CALLER_SAVE_MODE): Likewise.
	* config/mips/mips.c (mips_hard_regno_caller_save_mode): Likewise.
	* config/msp430/msp430.h (HARD_REGNO_CALLER_SAVE_MODE): Likewise.
	* config/rs6000/rs6000.h (HARD_REGNO_CALLER_SAVE_MODE): Likewise.
	* config/sh/sh.c (sh_hard_regno_caller_save_mode): Likewise.
	* reginfo.c (init_reg_modes_target): Likewise.
	(choose_hard_reg_mode): Take a pointer to a predefined_function_abi
	instead of a boolean call_save flag.
	* targhooks.c: Include function-abi.h.
	(default_dwarf_frame_reg_mode): Update call to choose_hard_reg_mode,
	using eh_edge_abi to choose the mode.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (hard_regno_call_part_clobbered): Take an ABI
	identifier instead of an rtx_insn.
	* doc/tm.texi: Regenerate.
	* hooks.h (hook_bool_insn_uint_mode_false): Delete.
	(hook_bool_uint_uint_mode_false): New function.
	* hooks.c (hook_bool_insn_uint_mode_false): Delete.
	(hook_bool_uint_uint_mode_false): New function.
	* config/aarch64/aarch64.c (aarch64_hard_regno_call_part_clobbered):
	Take an ABI identifier instead of an rtx_insn.
	* config/avr/avr.c (avr_hard_regno_call_part_clobbered): Likewise.
	* config/i386/i386.c (ix86_hard_regno_call_part_clobbered): Likewise.
	* config/mips/mips.c (mips_hard_regno_call_part_clobbered): Likewise.
	* config/pru/pru.c (pru_hard_regno_call_part_clobbered): Likewise.
	* config/rs6000/rs6000.c (rs6000_hard_regno_call_part_clobbered):
	Likewise.
	* config/s390/s390.c (s390_hard_regno_call_part_clobbered): Likewise.
	* cselib.c: Include function-abi.h.
	(cselib_process_insn): Update call to
	targetm.hard_regno_call_part_clobbered, using insn_callee_abi
	to get the appropriate ABI identifier.
	* function-abi.cc (predefined_function_abi::initialize): Update call
	to targetm.hard_regno_call_part_clobbered.
	* ira-conflicts.c (ira_build_conflicts): Likewise.
	* ira-costs.c (ira_tune_allocno_costs): Likewise.
	* lra-constraints.c: Include function-abi.h.
	(need_for_call_save_p): Update call to
	targetm.hard_regno_call_part_clobbered, using insn_callee_abi
	to get the appropriate ABI identifier.
	* lra-lives.c (check_pseudos_live_through_calls): Likewise.
	* regcprop.c (copyprop_hardreg_forward_1): Update call
	to targetm.hard_regno_call_part_clobbered.
	* reginfo.c (choose_hard_reg_mode): Likewise.
	* regrename.c (check_new_reg_p): Likewise.
	* reload.c (find_equiv_reg): Likewise.
	* reload1.c (emit_reload_insns): Likewise.
	* sched-deps.c: Include function-abi.h.
	(deps_analyze_insn): Update call to
	targetm.hard_regno_call_part_clobbered, using insn_callee_abi
	to get the appropriate ABI identifier.
	* sel-sched.c (init_regs_for_mode, mark_unavailable_hard_regs): Update
	call to targetm.hard_regno_call_part_clobbered.
	* targhooks.c (default_dwarf_frame_reg_mode): Likewise.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* config/i386/i386.c: Include function-abi.h.
	(ix86_avx_u128_mode_needed): Treat function calls as AVX_U128_ANY
	if they preserve some 256-bit or 512-bit SSE registers.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (insn_callee_abi): New hook.
	(remove_extra_call_preserved_regs): Delete.
	* doc/tm.texi.in (TARGET_INSN_CALLEE_ABI): New macro.
	(TARGET_REMOVE_EXTRA_CALL_PRESERVED_REGS): Delete.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_remove_extra_call_preserved_regs): Delete.
	* targhooks.c (default_remove_extra_call_preserved_regs): Delete.
	* config/aarch64/aarch64.c (aarch64_simd_call_p): Constify the
	insn argument.
	(aarch64_remove_extra_call_preserved_regs): Delete.
	(aarch64_insn_callee_abi): New function.
	(TARGET_REMOVE_EXTRA_CALL_PRESERVED_REGS): Delete.
	(TARGET_INSN_CALLEE_ABI): New macro.
	* rtl.h (get_call_fndecl): Declare.
	(cgraph_rtl_info): Fix formatting.  Tweak comment for
	function_used_regs.  Remove function_used_regs_valid.
	* rtlanal.c (get_call_fndecl): Moved from final.c
	* function-abi.h (insn_callee_abi): Declare.
	(target_function_abi_info): Mention insn_callee_abi.
	* function-abi.cc (fndecl_abi): Handle flag_ipa_ra in a similar
	way to get_call_reg_set_usage did.
	(insn_callee_abi): New function.
	* regs.h (get_call_reg_set_usage): Delete.
	* final.c: Include function-abi.h.
	(collect_fn_hard_reg_usage): Add fixed and stack registers to
	function_used_regs before the main loop rather than afterwards.
	Use insn_callee_abi instead of get_call_reg_set_usage.  Exit early
	if function_used_regs ends up not being useful.
	(get_call_fndecl): Move to rtlanal.c
	(get_call_cgraph_rtl_info, get_call_reg_set_usage): Delete.
	* caller-save.c: Include function-abi.h.
	(setup_save_areas, save_call_clobbered_regs): Use insn_callee_abi
	instead of get_call_reg_set_usage.
	* cfgcleanup.c: Include function-abi.h.
	(old_insns_match_p): Use insn_callee_abi instead of
	get_call_reg_set_usage.
	* cgraph.h (cgraph_node::rtl_info): Take a const_tree instead of
	a tree.
	* cgraph.c (cgraph_node::rtl_info): Likewise.  Initialize
	function_used_regs.
	* df-scan.c: Include function-abi.h.
	(df_get_call_refs): Use insn_callee_abi instead of
	get_call_reg_set_usage.
	* ira-lives.c: Include function-abi.h.
	(process_bb_node_lives): Use insn_callee_abi instead of
	get_call_reg_set_usage.
	* lra-lives.c: Include function-abi.h.
	(process_bb_lives): Use insn_callee_abi instead of
	get_call_reg_set_usage.
	* postreload.c: Include function-abi.h.
	(reload_combine): Use insn_callee_abi instead of
	get_call_reg_set_usage.
	* regcprop.c: Include function-abi.h.
	(copyprop_hardreg_forward_1): Use insn_callee_abi instead of
	get_call_reg_set_usage.
	* resource.c: Include function-abi.h.
	(mark_set_resources, mark_target_live_regs): Use insn_callee_abi
	instead of get_call_reg_set_usage.
	* var-tracking.c: Include function-abi.h.
	(dataflow_set_clear_at_call): Use insn_callee_abi instead of
	get_call_reg_set_usage.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (fntype_abi): New target hook.
	* doc/tm.texi.in (TARGET_FNTYPE_ABI): Likewise.
	* doc/tm.texi: Regenerate.
	* target.h (predefined_function_abi): Declare.
	* function-abi.cc (fntype_abi): Call targetm.calls.fntype_abi,
	if defined.
	* config/aarch64/aarch64.h (ARM_PCS_SIMD): New arm_pcs value.
	* config/aarch64/aarch64.c: Include function-abi.h.
	(aarch64_simd_abi, aarch64_fntype_abi): New functions.
	(TARGET_FNTYPE_ABI): Define.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* Makefile.in (OBJS): Add function-abi.o.
	(GTFILES): Add function-abi.h.
	* function-abi.cc: New file.
	* function-abi.h: Likewise.
	* emit-rtl.h (rtl_data::abi): New field.
	* function.c: Include function-abi.h.
	(prepare_function_start): Initialize crtl->abi.
	* read-rtl-function.c: Include regs.h and function-abi.h.
	(read_rtl_function_body): Initialize crtl->abi.
	(read_rtl_function_body_from_file_range): Likewise.
	* reginfo.c: Include function-abi.h.
	(init_reg_sets_1): Initialize default_function_abi.
	(globalize_reg): Call add_full_reg_clobber for each predefined ABI
	when making a register global.
	* target-globals.h (this_target_function_abi_info): Declare.
	(target_globals::function_abi_info): New field.
	(restore_target_globals): Copy it.
	* target-globals.c: Include function-abi.h.
	(default_target_globals): Initialize the function_abi_info field.
	(target_globals): Allocate it.
	(save_target_globals): Free it.

2019-09-30  Nick Clifton  <nickc@redhat.com>

	PR target/85978
	* config/frv/frv.c (frv_register_move_cost): Add break statements
	to avoid falling through to the wrong cases.  Tidy code.

2019-09-30  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_hard_regno_call_part_clobbered):
	For multi-registers modes, test how big each register part is.

2019-09-30  Nick Clifton  <nickc@redhat.com>

	PR target/59205
	* config/iq2000/iq2000.c (iq2000_select_section): Delete.
	(TARGET_ASM_SELECT_SECTION): Remove definition.
	(TARGET_HAVE_SWITCHABLE_BSS_SECTIONS): Allow definition.

2019-09-30  Ilya Leoshkevich  <iii@linux.ibm.com>

	* emit-rtl.c (init_raw_REG): New function.
	(gen_raw_REG): Use init_raw_REG.
	* gengenrtl.c (gendef): Emit init_* functions and alloca_*
	macros.
	* rtl.c (rtx_alloc_stat_v): Use rtx_init.
	* rtl.h (rtx_init): New function.
	(rtx_alloca): New function.
	(init_raw_REG): New function.
	(alloca_raw_REG): New macro.

2019-09-30  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (pcrel_address): Delete predicate.
	(pcrel_local_address): Replace pcrel_address predicate, use the
	new function address_to_insn_form.
	(pcrel_external_address): Replace with new implementation using
	address_to_insn_form..
	(prefixed_mem_operand): Delete predicate which is now unused.
	(pcrel_external_mem_operand): Delete predicate which is now
	unused.
	* config/rs6000/rs6000-protos.h (enum insn_form): New
	enumeration.
	(enum non_prefixed_form): New enumeration.
	(address_to_insn_form): New declaration.
	(prefixed_load_p): New declaration.
	(prefixed_store_p): New declaration.
	(prefixed_paddi_p): New declaration.
	(rs6000_asm_output_opcode): New declaration.
	(rs6000_final_prescan_insn): Move declaration and update calling
	signature.
	(address_is_prefixed): New helper inline function.
	* config/rs6000/rs6000.c(print_operand_address): Check for either
	PC-relative local symbols or PC-relative external symbols.
	(rs6000_emit_move): Support loading PC-relative addresses.
	(mode_supports_prefixed_address_p): Delete, no longer used.
	(rs6000_prefixed_address_mode_p): Delete, no longer used.
	(address_to_insn_form): New function to decode an address format.
	(reg_to_non_prefixed): New function to identify what the
	non-prefixed memory instruction format is for a register.
	(prefixed_load_p): New function to identify prefixed loads.
	(prefixed_store_p): New function to identify prefixed stores.
	(prefixed_paddi_p): New function to identify prefixed load
	immediates.
	(next_insn_prefixed_p): New static state variable.
	(rs6000_final_prescan_insn): New function to determine if an insn
	uses a prefixed instruction.
	(rs6000_asm_output_opcode): New function to emit 'p' in front of a
	prefixed instruction.
	* config/rs6000/rs6000.h (FINAL_PRESCAN_INSN): New target hook.
	(ASM_OUTPUT_OPCODE): New target hook.
	* config/rs6000/rs6000.md (prefixed): New insn attribute for
	prefixed instructions.
	(prefixed_length): New insn attribute for the size of prefixed
	instructions.
	(non_prefixed_length): New insn attribute for the size of
	non-prefixed instructions.
	(pcrel_local_addr): New insn to load up a local PC-relative
	address.
	(pcrel_extern_addr): New insn to load up an external PC-relative
	address.
	(mov<mode>_64bit_dm): Split the alternatives for loading 0.0 to a
	GPR and loading a 128-bit floating point type to a GPR.

2019-09-30  Richard Biener  <rguenther@suse.de>

	* gimple.c (gimple_get_lhs): For PHIs return the result.
	* tree-vectorizer.h (vectorizable_live_operation): Also get the
	SLP instance as argument.
	* tree-vect-loop.c (vect_analyze_loop_operations): Also handle
	double-reduction PHIs with vectorizable_lc_phi.
	(vect_analyze_loop_operations): Adjust.
	(vect_create_epilog_for_reduction): Remove all code not dealing
	with reduction LC PHI or epilogue generation.
	(vectorizable_live_operation): Call vect_create_epilog_for_reduction
	for live stmts of reductions.
	* tree-vect-stmts.c (vectorizable_condition): When !for_reduction
	do not handle defs that are not vect_internal_def.
	(can_vectorize_live_stmts): Adjust.
	(vect_analyze_stmt): When the vectorized stmt defined a value
	used on backedges adjust the backedge uses of vectorized PHIs.

2019-09-30  Martin Jambor  <mjambor@suse.cz>

	PR ipa/91853
	* tree-inline.c (force_value_to_type): New function.
	(setup_one_parameter): Use force_value_to_type to convert type.
	* tree-inline.c (force_value_to_type): Declare.
	* ipa-param-manipulation.c (ipa_param_adjustments::modify_call): Deal
	with register type mismatches.

2019-09-30  Andreas Tobler  <andreast@gcc.gnu.org>

	* config.gcc: Use the secure-plt on FreeBSD 13 and upwards for
	32-bit PowerPC.
	Define TARGET_FREEBSD32_SECURE_PLT for 64-bit PowerPC.
	* config/rs6000/t-freebsd64: Make use of the above define and build
	the 32-bit libraries with secure-plt.

2019-09-30  Jakub Jelinek  <jakub@redhat.com>

	PR target/91931
	* config/i386/i386-expand.c (ix86_expand_adjust_ufix_to_sfix_si): Use
	gen_int_mode instead of GEN_INT.

2019-09-29  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (gen_macho_low): Amend to include the mode
	argument.
	(machopic_indirect_data_reference): Amend gen_macho_low call
	to include mode argument
	* config/rs6000/rs6000.c (emit_move): Likewise. Amend a comment.
	* config/rs6000/darwin.md (@macho_low_<mode>): New, replaces
	the macho_high expander and two define_insn entries.

2019-09-29  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/90543
	* optc-save-gen.awk: Fix up printing string option differences.

2019-09-29  Kewen Lin  <linkw@gcc.gnu.org>

	* config/rs6000/rs6000.c (rs6000_builtin_vectorization_cost): Lower
	vec_perm cost to 1 for non-Power7 VSX architectures.

2019-09-29  Kewen Lin  <linkw@gcc.gnu.org>

	* config/rs6000/vsx.md (vec_pack[su]_float_v2di): New define_expand.
	(vec_unpack_[su]fix_trunc_hi_v4sf): Likewise.
	(vec_unpack_[su]fix_trunc_lo_v4sf): Likewise.

2019-09-28  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (gen_macho_high): Amend to include the mode
	argument.
	(machopic_indirect_data_reference): Amend gen_macho_high call
	to include mode argument.
	(machopic_legitimize_pic_address): Likewise.
	* config/rs6000/rs6000.c (rs6000_legitimize_address):
	* config/rs6000/darwin.md (@macho_high_<mode>): New, replaces
	the macho_high expander and two define_insn entries.

2019-09-28  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/86805
	* config/sh/sh.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Define.

2019-09-28  Oleg Endo  <olegendo@gcc.gnu.org>

	PR target/80672
	* config/sh/sh.c (parse_validate_atomic_model_option): Use
	std::string::compare instead of std::string::find.

2019-09-27  Maciej W. Rozycki  <macro@wdc.com>

	* configure: Regenerate.

2019-09-27  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/91920
	* gimplify.c (omp_default_clause): Predetermine DECL_IN_CONSTANT_POOL
	variables as shared.

2019-09-27  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.md (@macho_correct_pic_<mode>): New,
	replaces the expander and two define_insn entries.
	(@reload_macho_picbase_<mode>): Update gen_macho_correct_pic
	call.
	* config/rs6000/rs6000.md (builtin_setjmp_receiver): Likewise.

2019-09-27  David Malcolm  <dmalcolm@redhat.com>

	* fibonacci_heap.h (fibonacci_heap::empty): Make const.
	(fibonacci_heap::nodes): Likewise.
	(fibonacci_heap::min_key): Likewise.
	(fibonacci_heap::min): Likewise.

2019-09-27  David Malcolm  <dmalcolm@redhat.com>

	* cgraph.c (cgraph_node::get_fun): Make const.
	* cgraph.h (cgraph_node::get_fun): Likewise.

2019-09-27  Jakub Jelinek  <jakub@redhat.com>

	PR target/91919
	* config/arm/arm.md (<US>mlal): Remove SE wrappers around operands
	of SImode MULT.

2019-09-27  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_stmt_vec_info::reduc_fn): New.
	(STMT_VINFO_REDUC_FN): Likewise.
	* tree-vectorizer.c (vec_info::new_stmt_vec_info): Initialize
	STMT_VINFO_REDUC_FN.
	* tree-vect-loop.c (vect_is_simple_reduction): Fix STMT_VINFO_REDUC_IDX
	for condition reductions.
	(vect_create_epilog_for_reduction): Compute all required state
	from the stmt to be vectorized.
	(vectorizable_reduction): Simplify vect_create_epilog_for_reduction
	invocation and remove then dead code.  For single def-use chains
	record only a single vector stmt.

2019-09-27  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_builtin_class): New enum.
	(AARCH64_BUILTIN_SHIFT, AARCH64_BUILTIN_CLASS): New constants.
	(aarch64_gimple_fold_builtin, aarch64_mangle_builtin_type)
	(aarch64_fold_builtin, aarch64_init_builtins, aarch64_expand_builtin):
	(aarch64_builtin_decl, aarch64_builtin_rsqrt): Delete.
	(aarch64_general_mangle_builtin_type, aarch64_general_init_builtins):
	(aarch64_general_fold_builtin, aarch64_general_gimple_fold_builtin):
	(aarch64_general_expand_builtin, aarch64_general_builtin_decl):
	(aarch64_general_builtin_rsqrt): Declare.
	* config/aarch64/aarch64-builtins.c (aarch64_general_add_builtin):
	New function.
	(aarch64_mangle_builtin_type): Rename to...
	(aarch64_general_mangle_builtin_type): ...this.
	(aarch64_init_fcmla_laneq_builtins, aarch64_init_simd_builtins)
	(aarch64_init_crc32_builtins, aarch64_init_builtin_rsqrt)
	(aarch64_init_pauth_hint_builtins, aarch64_init_tme_builtins): Use
	aarch64_general_add_builtin instead of add_builtin_function.
	(aarch64_init_builtins): Rename to...
	(aarch64_general_init_builtins): ...this.  Use
	aarch64_general_add_builtin instead of add_builtin_function.
	(aarch64_builtin_decl): Rename to...
	(aarch64_general_builtin_decl): ...this and remove the unused
	arguments.
	(aarch64_expand_builtin): Rename to...
	(aarch64_general_expand_builtin): ...this and remove the unused
	arguments.
	(aarch64_builtin_rsqrt): Rename to...
	(aarch64_general_builtin_rsqrt): ...this.
	(aarch64_fold_builtin): Rename to...
	(aarch64_general_fold_builtin): ...this.  Take the function subcode
	and return type as arguments.  Remove the "ignored" argument.
	(aarch64_gimple_fold_builtin): Rename to...
	(aarch64_general_gimple_fold_builtin): ...this.  Take the function
	subcode and gcall as arguments, and return the new function call.
	* config/aarch64/aarch64.c (aarch64_init_builtins)
	(aarch64_fold_builtin, aarch64_gimple_fold_builtin)
	(aarch64_expand_builtin, aarch64_builtin_decl): New functions.
	(aarch64_builtin_reciprocal): Call aarch64_general_builtin_rsqrt
	instead of aarch64_builtin_rsqrt.
	(aarch64_mangle_type): Call aarch64_general_mangle_builtin_type
	instead of aarch64_mangle_builtin_type.

2019-09-27  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (check_builtin_call): New target hook.
	* doc/tm.texi.in (TARGET_CHECK_BUILTIN_CALL): New @hook.
	* doc/tm.texi: Regenerate.

2019-09-27  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/91909
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Take a
	reduc_index parameter.  When handling COND_REDUCTION, make sure
	that the reduction phi operand is in the correct arm of the
	VEC_COND_EXPR.
	(vectorizable_reduction): Pass reduc_index to the above.

2019-09-27  Yuliang Wang  <yuliang.wang@arm.com>

	* config/aarch64/aarch64-sve2.md (aarch64_sve2_sra<mode>):
	New combine pattern.

2019-09-26  Max Filippov  <jcmvbkbc@gmail.com>

	* config/xtensa/xtensa.c (hwloop_optimize): Insert zero overhead
	loop instruction into new basic block before the loop when basic
	block that precedes the loop is empty.

2019-09-26  Jakub Jelinek  <jakub@redhat.com>

	* function.c (gimplify_parameters): Use build_clobber function.
	* tree-ssa.c (execute_update_addresses_taken): Likewise.
	* tree-inline.c (expand_call_inline): Likewise.
	* tree-sra.c (clobber_subtree): Likewise.
	* tree-ssa-ccp.c (insert_clobber_before_stack_restore): Likewise.
	* omp-low.c (lower_rec_simd_input_clauses, lower_rec_input_clauses,
	lower_omp_single, lower_depend_clauses, lower_omp_taskreg,
	lower_omp_target): Likewise.
	* omp-expand.c (expand_omp_for_generic): Likewise.
	* omp-offload.c (ompdevlow_adjust_simt_enter): Likewise.

2019-09-26  Will Schmidt <will_schmidt@vnet.ibm.com>

	* config/rs6000/rs6000-builtin.def: (LVSL, LVSR, LVEBX, LVEHX,
	LVEWX, LVXL, LVXL_V2DF, LVXL_V2DI, LVXL_V4SF, LVXL_V4SI, LVXL_V8HI,
	LVXL_V16QI, LVX, LVX_V1TI, LVX_V2DF, LVX_V2DI, LVX_V4SF, LVX_V4SI,
	LVX_V8HI, LVX_V16QI, LVLX, LVLXL, LVRX, LVRXL, LXSDX, LXVD2X_V1TI,
	LXVD2X_V2DF, LXVD2X_V2DI, LXVDSX, LXVW4X_V4SF, LXVW4X_V4SI,
	LXVW4X_V8HI, LXVW4X_V16QI, LD_ELEMREV_V1TI, LD_ELEMREV_V2DF,
	LD_ELEMREV_V2DI, LD_ELEMREV_V4SF, LD_ELEMREV_V4SI, LD_ELEMREV_V8HI,
	LD_ELEMREV_V16QI): Use the PURE attribute.

2019-09-26  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.md: Replace the expanders for
	load_macho_picbase and reload_macho_picbase with use of '@'
	and <mode> in their respective define_insns.
	(nonlocal_goto_receiver): Pass Pmode to gen_reload_macho_picbase.
	* config/rs6000/rs6000-logue.c (rs6000_emit_prologue): Pass
	Pmode to gen_load_macho_picbase.
	* config/rs6000/rs6000.md: Likewise.

2019-09-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91896
	* tree-vect-loop.c (vectorizable_reduction): The single
	def-use cycle optimization cannot apply when there's more
	than one pattern stmt involved.

2019-09-26  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vect_analyze_loop_operations): Analyze
	loop-closed PHIs that are vect_internal_def.
	(vect_create_epilog_for_reduction): Exit early for nested cycles.
	Simplify.
	(vectorizable_lc_phi): New.
	* tree-vect-stmts.c (vect_analyze_stmt): Call vectorize_lc_phi.
	(vect_transform_stmt): Likewise.
	* tree-vectorizer.h (stmt_vec_info_type): Add lc_phi_info_type.
	(vectorizable_lc_phi): Declare.

2019-09-26  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vect_analyze_loop_operations): Also call
	vectorizable_reduction for vect_double_reduction_def.
	(vect_transform_loop): Likewise.
	(vect_create_epilog_for_reduction): Move double-reduction
	PHI creation and preheader argument setting of PHIs ...
	(vectorizable_reduction): ... here.  Also process
	vect_double_reduction_def PHIs, creating the vectorized
	PHI nodes, remembering the scalar adjustment computed for
	the epilogue in STMT_VINFO_REDUC_EPILOGUE_ADJUSTMENT.
	Remember the original reduction code in STMT_VINFO_REDUC_CODE.
	* tree-vectorizer.c (vec_info::new_stmt_vec_info):
	Initialize STMT_VINFO_REDUC_CODE.
	* tree-vectorizer.h (_stmt_vec_info::reduc_epilogue_adjustment): New.
	(_stmt_vec_info::reduc_code): Likewise.
	(STMT_VINFO_REDUC_EPILOGUE_ADJUSTMENT): Likewise.
	(STMT_VINFO_REDUC_CODE): Likewise.

2019-09-26  Matt Turner  <mattst88@gmail.com>

	PR driver/69471
	* config/aarch64/aarch64.opt (march=): Add Negative(march=).
	(mtune=): Add Negative(mtune=).
	(mcpu=): Add Negative(mcpu=).
	* config/arm/arm.opt: Likewise.

2019-09-26  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm.md (arm_<simd32_op>): New define_insn.
	* config/arm/arm_acle.h (__smlald, __smlaldx, __smlsld, __smlsldx):
	Define.
	* config/arm/arm_acle.h: Define builtins for the above.
	* config/arm/iterators.md (SIMD32_DIMODE): New int_iterator.
	(simd32_op): Handle the above.
	* config/arm/unspecs.md: Define unspecs for the above.

2019-09-26  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm.md (arm_<simd32_op>): New define_insn.
	(arm_<sup>xtb16): Likewise.
	(arm_usada8): Likewise.
	* config/arm/arm_acle.h (__qadd8, __qsub8, __shadd8, __shsub8,
	__uhadd8, __uhsub8, __uqadd8, __uqsub8, __qadd16, __qasx, __qsax,
	__qsub16, __shadd16, __shasx, __shsax, __shsub16, __uhadd16, __uhasx,
	__uhsax, __uhsub16, __uqadd16, __uqasx, __uqsax, __uqsub16, __sxtab16,
	__sxtb16, __uxtab16, __uxtb16): Define.
	* config/arm/arm_acle_builtins.def: Define builtins for the above.
	* config/arm/unspecs.md: Define unspecs for the above.
	* config/arm/iterators.md (SIMD32_NOGE_BINOP): New int_iterator.
	(USXTB16): Likewise.
	(simd32_op): New int_attribute.
	(sup): Handle UNSPEC_SXTB16, UNSPEC_UXTB16.
	* doc/sourcebuild.exp (arm_simd32_ok): Document.

2019-09-26  Martin Jambor  <mjambor@suse.cz>

	* ipa-sra.c (verify_splitting_accesses): Fix quoting in a call to
	internal_error.

2019-09-26  Martin Jambor  <mjambor@suse.cz>

	* ipa-sra.c (process_scan_results): Fix continue condition.

2019-09-26  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/91885
	* tree-vectorizer.c (try_vectorize_loop_1): Add
	TODO_update_ssa_only_virtuals similarly to what slp pass does.

2019-09-26  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_rtx_costs): Use
	aarch64_plus_immediate rather than aarch64_uimm12_shift
	to test for valid PLUS immediates.

2019-09-25  Martin Jambor  <mjambor@suse.cz>

	* tree-sra.c (no_accesses_p): Remove.
	(no_accesses_representant): Likewise.

2019-09-25  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/arm_neon.h (vaba_s8): Use __ in identifiers
	consistenly.
	(vaba_s16): Likewise.
	(vaba_s32): Likewise.
	(vaba_u8): Likewise.
	(vaba_u16): Likewise.
	(vaba_u32): Likewise.
	(vabal_high_s8): Likewise.
	(vabal_high_s16): Likewise.
	(vabal_high_s32): Likewise.
	(vabal_high_u8): Likewise.
	(vabal_high_u16): Likewise.
	(vabal_high_u32): Likewise.
	(vabal_s8): Likewise.
	(vabal_s16): Likewise.
	(vabal_s32): Likewise.
	(vabal_u8): Likewise.
	(vabal_u16): Likewise.
	(vabal_u32): Likewise.
	(vabaq_s8): Likewise.
	(vabaq_s16): Likewise.
	(vabaq_s32): Likewise.
	(vabaq_u8): Likewise.
	(vabaq_u16): Likewise.
	(vabaq_u32): Likewise.
	(vabd_s8): Likewise.
	(vabd_s16): Likewise.
	(vabd_s32): Likewise.
	(vabd_u8): Likewise.
	(vabd_u16): Likewise.
	(vabd_u32): Likewise.
	(vabdl_high_s8): Likewise.
	(vabdl_high_s16): Likewise.
	(vabdl_high_s32): Likewise.
	(vabdl_high_u8): Likewise.
	(vabdl_high_u16): Likewise.
	(vabdl_high_u32): Likewise.
	(vabdl_s8): Likewise.
	(vabdl_s16): Likewise.
	(vabdl_s32): Likewise.
	(vabdl_u8): Likewise.
	(vabdl_u16): Likewise.
	(vabdl_u32): Likewise.
	(vabdq_s8): Likewise.
	(vabdq_s16): Likewise.
	(vabdq_s32): Likewise.
	(vabdq_u8): Likewise.
	(vabdq_u16): Likewise.
	(vabdq_u32): Likewise.
	(vaddlv_s8): Likewise.
	(vaddlv_s16): Likewise.
	(vaddlv_u8): Likewise.
	(vaddlv_u16): Likewise.
	(vaddlvq_s8): Likewise.
	(vaddlvq_s16): Likewise.
	(vaddlvq_s32): Likewise.
	(vaddlvq_u8): Likewise.
	(vaddlvq_u16): Likewise.
	(vaddlvq_u32): Likewise.
	(vcvtx_f32_f64): Likewise.
	(vcvtx_high_f32_f64): Likewise.
	(vcvtxd_f32_f64): Likewise.
	(vmla_n_f32): Likewise.
	(vmla_n_s16): Likewise.
	(vmla_n_s32): Likewise.
	(vmla_n_u16): Likewise.
	(vmla_n_u32): Likewise.
	(vmla_s8): Likewise.
	(vmla_s16): Likewise.
	(vmla_s32): Likewise.
	(vmla_u8): Likewise.
	(vmla_u16): Likewise.
	(vmla_u32): Likewise.
	(vmlal_high_n_s16): Likewise.
	(vmlal_high_n_s32): Likewise.
	(vmlal_high_n_u16): Likewise.
	(vmlal_high_n_u32): Likewise.
	(vmlal_high_s8): Likewise.
	(vmlal_high_s16): Likewise.
	(vmlal_high_s32): Likewise.
	(vmlal_high_u8): Likewise.
	(vmlal_high_u16): Likewise.
	(vmlal_high_u32): Likewise.
	(vmlal_n_s16): Likewise.
	(vmlal_n_s32): Likewise.
	(vmlal_n_u16): Likewise.
	(vmlal_n_u32): Likewise.
	(vmlal_s8): Likewise.
	(vmlal_s16): Likewise.
	(vmlal_s32): Likewise.
	(vmlal_u8): Likewise.
	(vmlal_u16): Likewise.
	(vmlal_u32): Likewise.
	(vmlaq_n_f32): Likewise.
	(vmlaq_n_s16): Likewise.
	(vmlaq_n_s32): Likewise.
	(vmlaq_n_u16): Likewise.
	(vmlaq_n_u32): Likewise.
	(vmlaq_s8): Likewise.
	(vmlaq_s16): Likewise.
	(vmlaq_s32): Likewise.
	(vmlaq_u8): Likewise.
	(vmlaq_u16): Likewise.
	(vmlaq_u32): Likewise.
	(vmls_n_f32): Likewise.
	(vmls_n_s16): Likewise.
	(vmls_n_s32): Likewise.
	(vmls_n_u16): Likewise.
	(vmls_n_u32): Likewise.
	(vmls_s8): Likewise.
	(vmls_s16): Likewise.
	(vmls_s32): Likewise.
	(vmls_u8): Likewise.
	(vmls_u16): Likewise.
	(vmls_u32): Likewise.
	(vmlsl_high_n_s16): Likewise.
	(vmlsl_high_n_s32): Likewise.
	(vmlsl_high_n_u16): Likewise.
	(vmlsl_high_n_u32): Likewise.
	(vmlsl_high_s8): Likewise.
	(vmlsl_high_s16): Likewise.
	(vmlsl_high_s32): Likewise.
	(vmlsl_high_u8): Likewise.
	(vmlsl_high_u16): Likewise.
	(vmlsl_high_u32): Likewise.
	(vmlsl_n_s16): Likewise.
	(vmlsl_n_s32): Likewise.
	(vmlsl_n_u16): Likewise.
	(vmlsl_n_u32): Likewise.
	(vmlsl_s8): Likewise.
	(vmlsl_s16): Likewise.
	(vmlsl_s32): Likewise.
	(vmlsl_u8): Likewise.
	(vmlsl_u16): Likewise.
	(vmlsl_u32): Likewise.
	(vmlsq_n_f32): Likewise.
	(vmlsq_n_s16): Likewise.
	(vmlsq_n_s32): Likewise.
	(vmlsq_n_u16): Likewise.
	(vmlsq_n_u32): Likewise.
	(vmlsq_s8): Likewise.
	(vmlsq_s16): Likewise.
	(vmlsq_s32): Likewise.
	(vmlsq_u8): Likewise.
	(vmlsq_u16): Likewise.
	(vmlsq_u32): Likewise.
	(vmovl_high_s8): Likewise.
	(vmovl_high_s16): Likewise.
	(vmovl_high_s32): Likewise.
	(vmovl_high_u8): Likewise.
	(vmovl_high_u16): Likewise.
	(vmovl_high_u32): Likewise.
	(vmovl_s8): Likewise.
	(vmovl_s16): Likewise.
	(vmovl_s32): Likewise.
	(vmovl_u8): Likewise.
	(vmovl_u16): Likewise.
	(vmovl_u32): Likewise.
	(vmovn_high_s16): Likewise.
	(vmovn_high_s32): Likewise.
	(vmovn_high_s64): Likewise.
	(vmovn_high_u16): Likewise.
	(vmovn_high_u32): Likewise.
	(vmovn_high_u64): Likewise.
	(vmovn_s16): Likewise.
	(vmovn_s32): Likewise.
	(vmovn_s64): Likewise.
	(vmovn_u16): Likewise.
	(vmovn_u32): Likewise.
	(vmovn_u64): Likewise.
	(vmull_high_n_s16): Likewise.
	(vmull_high_n_s32): Likewise.
	(vmull_high_n_u16): Likewise.
	(vmull_high_n_u32): Likewise.
	(vmull_high_p8): Likewise.
	(vmull_high_s8): Likewise.
	(vmull_high_s16): Likewise.
	(vmull_high_s32): Likewise.
	(vmull_high_u8): Likewise.
	(vmull_high_u16): Likewise.
	(vmull_high_u32): Likewise.
	(vmull_n_s16): Likewise.
	(vmull_n_s32): Likewise.
	(vmull_n_u16): Likewise.
	(vmull_n_u32): Likewise.
	(vmull_p8): Likewise.
	(vmull_s8): Likewise.
	(vmull_s16): Likewise.
	(vmull_s32): Likewise.
	(vmull_u8): Likewise.
	(vmull_u16): Likewise.
	(vmull_u32): Likewise.
	(vpadal_s8): Likewise.
	(vpadal_s16): Likewise.
	(vpadal_s32): Likewise.
	(vpadal_u8): Likewise.
	(vpadal_u16): Likewise.
	(vpadal_u32): Likewise.
	(vpadalq_s8): Likewise.
	(vpadalq_s16): Likewise.
	(vpadalq_s32): Likewise.
	(vpadalq_u8): Likewise.
	(vpadalq_u16): Likewise.
	(vpadalq_u32): Likewise.
	(vpaddl_s8): Likewise.
	(vpaddl_s16): Likewise.
	(vpaddl_s32): Likewise.
	(vpaddl_u8): Likewise.
	(vpaddl_u16): Likewise.
	(vpaddl_u32): Likewise.
	(vpaddlq_s8): Likewise.
	(vpaddlq_s16): Likewise.
	(vpaddlq_s32): Likewise.
	(vpaddlq_u8): Likewise.
	(vpaddlq_u16): Likewise.
	(vpaddlq_u32): Likewise.
	(vpaddq_s8): Likewise.
	(vpaddq_s16): Likewise.
	(vpaddq_s32): Likewise.
	(vpaddq_s64): Likewise.
	(vpaddq_u8): Likewise.
	(vpaddq_u16): Likewise.
	(vpaddq_u32): Likewise.
	(vpaddq_u64): Likewise.
	(vqdmulh_n_s16): Likewise.
	(vqdmulh_n_s32): Likewise.
	(vqdmulhq_n_s16): Likewise.
	(vqdmulhq_n_s32): Likewise.
	(vqmovn_high_s16): Likewise.
	(vqmovn_high_s32): Likewise.
	(vqmovn_high_s64): Likewise.
	(vqmovn_high_u16): Likewise.
	(vqmovn_high_u32): Likewise.
	(vqmovn_high_u64): Likewise.
	(vqmovun_high_s16): Likewise.
	(vqmovun_high_s32): Likewise.
	(vqmovun_high_s64): Likewise.
	(vqrdmulh_n_s16): Likewise.
	(vqrdmulh_n_s32): Likewise.
	(vqrdmulhq_n_s16): Likewise.
	(vqrdmulhq_n_s32): Likewise.
	(vrsqrte_u32): Likewise.
	(vrsqrteq_u32): Likewise.
	(vtst_p8): Likewise.
	(vtst_p16): Likewise.
	(vtst_p64): Likewise.
	(vtstq_p8): Likewise.
	(vtstq_p16): Likewise.
	(vtstq_p64): Likewise.
	(vaddlv_s32): Likewise.
	(vaddlv_u32): Likewise.
	(vqtbl1_p8): Likewise.
	(vqtbl1_s8): Likewise.
	(vqtbl1_u8): Likewise.
	(vqtbl1q_p8): Likewise.
	(vqtbl1q_s8): Likewise.
	(vqtbl1q_u8): Likewise.
	(vqtbx1_s8): Likewise.
	(vqtbx1_u8): Likewise.
	(vqtbx1_p8): Likewise.
	(vqtbx1q_s8): Likewise.
	(vqtbx1q_u8): Likewise.
	(vqtbx1q_p8): Likewise.
	(vtbl1_s8): Likewise.
	(vtbl1_u8): Likewise.
	(vtbl1_p8): Likewise.
	(vtbl2_s8): Likewise.
	(vtbl2_u8): Likewise.
	(vtbl2_p8): Likewise.
	(vtbl3_s8): Likewise.
	(vtbl3_u8): Likewise.
	(vtbl3_p8): Likewise.
	(vtbl4_s8): Likewise.
	(vtbl4_u8): Likewise.
	(vtbl4_p8): Likewise.
	(vtbx2_s8): Likewise.
	(vtbx2_u8): Likewise.
	(vtbx2_p8): Likewise.
	(vld1_f32): Likewise.
	(vld1_f64): Likewise.
	(vld1_p8): Likewise.
	(vld1_p16): Likewise.
	(vld1_p64): Likewise.
	(vld1_s8): Likewise.
	(vld1_s16): Likewise.
	(vld1_s32): Likewise.
	(vld1_s64): Likewise.
	(vld1_u8): Likewise.
	(vld1_u16): Likewise.
	(vld1_u32): Likewise.
	(vld1_u64): Likewise.
	(vld1q_f32): Likewise.
	(vld1q_f64): Likewise.
	(vld1q_p8): Likewise.
	(vld1q_p16): Likewise.
	(vld1q_p64): Likewise.
	(vld1q_s8): Likewise.
	(vld1q_s16): Likewise.
	(vld1q_s32): Likewise.
	(vld1q_s64): Likewise.
	(vld1q_u8): Likewise.
	(vld1q_u16): Likewise.
	(vld1q_u32): Likewise.
	(vld1q_u64): Likewise.
	(vpmax_s8): Likewise.
	(vpmax_s16): Likewise.
	(vpmax_s32): Likewise.
	(vpmax_u8): Likewise.
	(vpmax_u16): Likewise.
	(vpmax_u32): Likewise.
	(vpmaxq_s8): Likewise.
	(vpmaxq_s16): Likewise.
	(vpmaxq_s32): Likewise.
	(vpmaxq_u8): Likewise.
	(vpmaxq_u16): Likewise.
	(vpmaxq_u32): Likewise.
	(vpmax_f32): Likewise.
	(vpmaxq_f32): Likewise.
	(vpmaxq_f64): Likewise.
	(vpmaxqd_f64): Likewise.
	(vpmaxs_f32): Likewise.
	(vpmaxnm_f32): Likewise.
	(vpmaxnmq_f32): Likewise.
	(vpmaxnmq_f64): Likewise.
	(vpmaxnmqd_f64): Likewise.
	(vpmaxnms_f32): Likewise.
	(vpmin_s8): Likewise.
	(vpmin_s16): Likewise.
	(vpmin_s32): Likewise.
	(vpmin_u8): Likewise.
	(vpmin_u16): Likewise.
	(vpmin_u32): Likewise.
	(vpminq_s8): Likewise.
	(vpminq_s16): Likewise.
	(vpminq_s32): Likewise.
	(vpminq_u8): Likewise.
	(vpminq_u16): Likewise.
	(vpminq_u32): Likewise.
	(vpmin_f32): Likewise.
	(vpminq_f32): Likewise.
	(vpminq_f64): Likewise.
	(vpminqd_f64): Likewise.
	(vpmins_f32): Likewise.
	(vpminnm_f32): Likewise.
	(vpminnmq_f32): Likewise.
	(vpminnmq_f64): Likewise.
	(vpminnmqd_f64): Likewise.
	(vpminnms_f32): Likewise.
	(vmla_f32): Likewise.
	(vmlaq_f32): Likewise.
	(vmlaq_f64): Likewise.
	(vmls_f32): Likewise.
	(vmlsq_f32): Likewise.
	(vmlsq_f64): Likewise.
	(vqtbl2_s8): Likewise.
	(vqtbl2_u8): Likewise.
	(vqtbl2_p8): Likewise.
	(vqtbl2q_s8): Likewise.
	(vqtbl2q_u8): Likewise.
	(vqtbl2q_p8): Likewise.
	(vqtbl3_s8): Likewise.
	(vqtbl3_u8): Likewise.
	(vqtbl3_p8): Likewise.
	(vqtbl3q_s8): Likewise.
	(vqtbl3q_u8): Likewise.
	(vqtbl3q_p8): Likewise.
	(vqtbl4_s8): Likewise.
	(vqtbl4_u8): Likewise.
	(vqtbl4_p8): Likewise.
	(vqtbl4q_s8): Likewise.
	(vqtbl4q_u8): Likewise.
	(vqtbl4q_p8): Likewise.
	(vqtbx2_s8): Likewise.
	(vqtbx2_u8): Likewise.
	(vqtbx2_p8): Likewise.
	(vqtbx2q_s8): Likewise.
	(vqtbx2q_u8): Likewise.
	(vqtbx2q_p8): Likewise.
	(vqtbx3_s8): Likewise.
	(vqtbx3_u8): Likewise.
	(vqtbx3_p8): Likewise.
	(vqtbx3q_s8): Likewise.
	(vqtbx3q_u8): Likewise.
	(vqtbx3q_p8): Likewise.
	(vqtbx4_s8): Likewise.
	(vqtbx4_u8): Likewise.
	(vqtbx4_p8): Likewise.
	(vqtbx4q_s8): Likewise.
	(vqtbx4q_u8): Likewise.
	(vqtbx4q_p8): Likewise.
	(vrev16_p8): Likewise.
	(vrev16_s8): Likewise.
	(vrev16_u8): Likewise.
	(vrev16q_p8): Likewise.
	(vrev16q_s8): Likewise.
	(vrev16q_u8): Likewise.
	(vrev32_p8): Likewise.
	(vrev32_p16): Likewise.
	(vrev32_s8): Likewise.
	(vrev32_s16): Likewise.
	(vrev32_u8): Likewise.
	(vrev32_u16): Likewise.
	(vrev32q_p8): Likewise.
	(vrev32q_p16): Likewise.
	(vrev32q_s8): Likewise.
	(vrev32q_s16): Likewise.
	(vrev32q_u8): Likewise.
	(vrev32q_u16): Likewise.
	(vrev64_f32): Likewise.
	(vrev64_p8): Likewise.
	(vrev64_p16): Likewise.
	(vrev64_s8): Likewise.
	(vrev64_s16): Likewise.
	(vrev64_s32): Likewise.
	(vrev64_u8): Likewise.
	(vrev64_u16): Likewise.
	(vrev64_u32): Likewise.
	(vrev64q_f32): Likewise.
	(vrev64q_p8): Likewise.
	(vrev64q_p16): Likewise.
	(vrev64q_s8): Likewise.
	(vrev64q_s16): Likewise.
	(vrev64q_s32): Likewise.
	(vrev64q_u8): Likewise.
	(vrev64q_u16): Likewise.
	(vrev64q_u32): Likewise.
	(vsha1cq_u32): Likewise.
	(vsha1mq_u32): Likewise.
	(vsha1pq_u32): Likewise.
	(vsha1h_u32): Likewise.
	(vsha1su0q_u32): Likewise.
	(vsha1su1q_u32): Likewise.
	(vsha256hq_u32): Likewise.
	(vsha256h2q_u32): Likewise.
	(vsha256su0q_u32): Likewise.
	(vsha256su1q_u32): Likewise.
	(vmull_p64): Likewise.
	(vmull_high_p64): Likewise.
	(vsqrt_f32): Likewise.
	(vsqrtq_f32): Likewise.
	(vsqrt_f64): Likewise.
	(vsqrtq_f64): Likewise.
	(vst1_f32): Likewise.
	(vst1_f64): Likewise.
	(vst1_p8): Likewise.
	(vst1_p16): Likewise.
	(vst1_p64): Likewise.
	(vst1_s8): Likewise.
	(vst1_s16): Likewise.
	(vst1_s32): Likewise.
	(vst1_s64): Likewise.
	(vst1_u8): Likewise.
	(vst1_u16): Likewise.
	(vst1_u32): Likewise.
	(vst1_u64): Likewise.
	(vst1q_f32): Likewise.
	(vst1q_f64): Likewise.
	(vst1q_p8): Likewise.
	(vst1q_p16): Likewise.
	(vst1q_p64): Likewise.
	(vst1q_s8): Likewise.
	(vst1q_s16): Likewise.
	(vst1q_s32): Likewise.
	(vst1q_s64): Likewise.
	(vst1q_u8): Likewise.
	(vst1q_u16): Likewise.
	(vst1q_u32): Likewise.
	(vst1q_u64): Likewise.
	(vst1_s64_x2): Likewise.
	(vst1_u64_x2): Likewise.
	(vst1_f64_x2): Likewise.
	(vst1_s8_x2): Likewise.
	(vst1_p8_x2): Likewise.
	(vst1_s16_x2): Likewise.
	(vst1_p16_x2): Likewise.
	(vst1_s32_x2): Likewise.
	(vst1_u8_x2): Likewise.
	(vst1_u16_x2): Likewise.
	(vst1_u32_x2): Likewise.
	(vst1_f16_x2): Likewise.
	(vst1_f32_x2): Likewise.
	(vst1_p64_x2): Likewise.
	(vst1q_s8_x2): Likewise.
	(vst1q_p8_x2): Likewise.
	(vst1q_s16_x2): Likewise.
	(vst1q_p16_x2): Likewise.
	(vst1q_s32_x2): Likewise.
	(vst1q_s64_x2): Likewise.
	(vst1q_u8_x2): Likewise.
	(vst1q_u16_x2): Likewise.
	(vst1q_u32_x2): Likewise.
	(vst1q_u64_x2): Likewise.
	(vst1q_f16_x2): Likewise.
	(vst1q_f32_x2): Likewise.
	(vst1q_f64_x2): Likewise.
	(vst1q_p64_x2): Likewise.
	(vst1_s64_x3): Likewise.
	(vst1_u64_x3): Likewise.
	(vst1_f64_x3): Likewise.
	(vst1_s8_x3): Likewise.
	(vst1_p8_x3): Likewise.
	(vst1_s16_x3): Likewise.
	(vst1_p16_x3): Likewise.
	(vst1_s32_x3): Likewise.
	(vst1_u8_x3): Likewise.
	(vst1_u16_x3): Likewise.
	(vst1_u32_x3): Likewise.
	(vst1_f16_x3): Likewise.
	(vst1_f32_x3): Likewise.
	(vst1_p64_x3): Likewise.
	(vst1q_s8_x3): Likewise.
	(vst1q_p8_x3): Likewise.
	(vst1q_s16_x3): Likewise.
	(vst1q_p16_x3): Likewise.
	(vst1q_s32_x3): Likewise.
	(vst1q_s64_x3): Likewise.
	(vst1q_u8_x3): Likewise.
	(vst1q_u16_x3): Likewise.
	(vst1q_u32_x3): Likewise.
	(vst1q_u64_x3): Likewise.
	(vst1q_f16_x3): Likewise.
	(vst1q_f32_x3): Likewise.
	(vst1q_f64_x3): Likewise.
	(vst1q_p64_x3): Likewise.
	(vst2_s64): Likewise.
	(vst2_u64): Likewise.
	(vst2_f64): Likewise.
	(vst2_s8): Likewise.
	(vst2_p8): Likewise.
	(vst2_s16): Likewise.
	(vst2_p16): Likewise.
	(vst2_s32): Likewise.
	(vst2_u8): Likewise.
	(vst2_u16): Likewise.
	(vst2_u32): Likewise.
	(vst2_f16): Likewise.
	(vst2_f32): Likewise.
	(vst2_p64): Likewise.
	(vst2q_s8): Likewise.
	(vst2q_p8): Likewise.
	(vst2q_s16): Likewise.
	(vst2q_p16): Likewise.
	(vst2q_s32): Likewise.
	(vst2q_s64): Likewise.
	(vst2q_u8): Likewise.
	(vst2q_u16): Likewise.
	(vst2q_u32): Likewise.
	(vst2q_u64): Likewise.
	(vst2q_f16): Likewise.
	(vst2q_f32): Likewise.
	(vst2q_f64): Likewise.
	(vst2q_p64): Likewise.
	(vst3_s64): Likewise.
	(vst3_u64): Likewise.
	(vst3_f64): Likewise.
	(vst3_s8): Likewise.
	(vst3_p8): Likewise.
	(vst3_s16): Likewise.
	(vst3_p16): Likewise.
	(vst3_s32): Likewise.
	(vst3_u8): Likewise.
	(vst3_u16): Likewise.
	(vst3_u32): Likewise.
	(vst3_f16): Likewise.
	(vst3_f32): Likewise.
	(vst3_p64): Likewise.
	(vst3q_s8): Likewise.
	(vst3q_p8): Likewise.
	(vst3q_s16): Likewise.
	(vst3q_p16): Likewise.
	(vst3q_s32): Likewise.
	(vst3q_s64): Likewise.
	(vst3q_u8): Likewise.
	(vst3q_u16): Likewise.
	(vst3q_u32): Likewise.
	(vst3q_u64): Likewise.
	(vst3q_f16): Likewise.
	(vst3q_f32): Likewise.
	(vst3q_f64): Likewise.
	(vst3q_p64): Likewise.
	(vst4_s64): Likewise.
	(vst4_u64): Likewise.
	(vst4_f64): Likewise.
	(vst4_s8): Likewise.
	(vst4_p8): Likewise.
	(vst4_s16): Likewise.
	(vst4_p16): Likewise.
	(vst4_s32): Likewise.
	(vst4_u8): Likewise.
	(vst4_u16): Likewise.
	(vst4_u32): Likewise.
	(vst4_f16): Likewise.
	(vst4_f32): Likewise.
	(vst4_p64): Likewise.
	(vst4q_s8): Likewise.
	(vst4q_p8): Likewise.
	(vst4q_s16): Likewise.
	(vst4q_p16): Likewise.
	(vst4q_s32): Likewise.
	(vst4q_s64): Likewise.
	(vst4q_u8): Likewise.
	(vst4q_u16): Likewise.
	(vst4q_u32): Likewise.
	(vst4q_u64): Likewise.
	(vst4q_f16): Likewise.
	(vst4q_f32): Likewise.
	(vst4q_f64): Likewise.
	(vst4q_p64): Likewise.
	(vtbx4_s8): Likewise.
	(vtbx4_u8): Likewise.
	(vtbx4_p8): Likewise.
	(vtrn_f32): Likewise.
	(vtrn_p8): Likewise.
	(vtrn_p16): Likewise.
	(vtrn_s8): Likewise.
	(vtrn_s16): Likewise.
	(vtrn_s32): Likewise.
	(vtrn_u8): Likewise.
	(vtrn_u16): Likewise.
	(vtrn_u32): Likewise.
	(vtrnq_f32): Likewise.
	(vtrnq_p8): Likewise.
	(vtrnq_p16): Likewise.
	(vtrnq_s8): Likewise.
	(vtrnq_s16): Likewise.
	(vtrnq_s32): Likewise.
	(vtrnq_u8): Likewise.
	(vtrnq_u16): Likewise.
	(vtrnq_u32): Likewise.
	(vrsqrte_f16): Likewise.
	(vrsqrteq_f16): Likewise.
	(vsqrt_f16): Likewise.
	(vsqrtq_f16): Likewise.
	(vabd_f16): Likewise.
	(vabdq_f16): Likewise.
	(vpadd_f16): Likewise.
	(vpaddq_f16): Likewise.
	(vpmax_f16): Likewise.
	(vpmaxq_f16): Likewise.
	(vpmaxnm_f16): Likewise.
	(vpmaxnmq_f16): Likewise.
	(vpmin_f16): Likewise.
	(vpminq_f16): Likewise.
	(vpminnm_f16): Likewise.
	(vpminnmq_f16): Likewise.
	(vrsqrts_f16): Likewise.
	(vrsqrtsq_f16): Likewise.

2019-09-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91896
	* tree-vect-loop.c (vectorizable_reduction): The single
	def-use cycle optimization cannot apply when there's more
	than one pattern stmt involved.

2019-09-24  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.md (load_macho_picbase_<mode>): New, using
	the 'P' mode iterator, replacing the (removed) SI and DI variants.
	(reload_macho_picbase_<mode>): Likewise.

2019-09-24  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.md: Move darwin.md include until
	after the definition of the mode iterators.

2019-09-23  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/91570
	* tree-ssa-strlen.c (get_range_strlen_dynamic): Handle null and
	non-constant minlen, maxlen and maxbound.

2019-09-24  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_stmt_vec_info::const_cond_reduc_code):
	Rename to...
	(_stmt_vec_info::cond_reduc_code): ... this.
	(_stmt_vec_info::induc_cond_initial_val): Add.
	(STMT_VINFO_VEC_CONST_COND_REDUC_CODE): Rename to...
	(STMT_VINFO_VEC_COND_REDUC_CODE): ... this.
	(STMT_VINFO_VEC_INDUC_COND_INITIAL_VAL): Add.
	* tree-vectorizer.c (vec_info::new_stmt_vec_info): Adjust.
	* tree-vect-loop.c (get_initial_def_for_reduction): Pass in
	the reduction code.
	(vect_create_epilog_for_reduction): Drop special
	induction condition reduction params, pass in reduction code
	and simplify.
	(vectorizable_reduction): Perform condition reduction kind
	selection only at analysis time.  Adjust passing on state.

2019-09-24  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.md (mov<mode>): Don't call
	aarch64_split_dimode_const_store on volatile MEM.

2019-09-24  Stamatis Markianos-Wright  <stam.markianos-wright@arm.com>

	* config/aarch64/aarch64-option-extensions.def (fp16fml):
	Update hwcap string for fp16fml.

2019-09-24  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/91866
	* match.pd (((T)(A)) + CST -> (T)(A + CST)): Formatting fix.
	(((T)(A + CST1)) + CST2 -> (T)(A) + (T)CST1 + CST2): New optimization.

2019-09-24  Martin Liska  <mliska@suse.cz>

	* cfgexpand.c (gimple_assign_rhs_to_tree): Use switch statement
	instead of if-elseif-elseif-...
	* gimple-expr.c (extract_ops_from_tree): Likewise.
	* gimple.c (get_gimple_rhs_num_ops): Likewise.
	* tree-ssa-forwprop.c (rhs_to_tree): Likewise.

2019-09-24  Martin Jambor  <mjambor@suse.cz>

	PR ipa/91831
	* ipa-param-manipulation.c (carry_over_param): Make a method of
	ipa_param_body_adjustments, remove now unnecessary argument.  Also copy
	in case of a context mismatch.
	(ipa_param_body_adjustments::common_initialization): Adjust call to
	carry_over_param.
	* ipa-param-manipulation.h (class ipa_param_body_adjustments): Add
	private method carry_over_param.

2019-09-24  Martin Jambor  <mjambor@suse.cz>

	PR ipa/91832
	* ipa-sra.c (scan_expr_access): Check that offset is non-negative.

2019-09-24  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_reference_lookup_3): Valueize MEM_REF
	base.

2019-09-23  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/t-arm (arm-builtins.o): Add dependency on
	arm_acle_builtins.def.

2019-09-23  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/91823
	* config/rs6000/altivec.md (altivec_copysign_v4sf3): Generate
	canonical CONST_INTs.  Use gen_rtvec.

2019-09-23  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (get_initial_def_for_reduction): Simplify,
	avoid adjusting by + 0 or * 1.
	(vect_create_epilog_for_reduction): Get reduction code only
	when necessary.  Deal with adjustment_def only when necessary.

2019-09-23  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/atomics.md (aarch64_store_exclusive_pair): Fix
	memmodel index.

2019-09-23  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	PR ipa/91835
	* lto-section-in.c (lto_section_name): Use "ipa_sra" instead of
	"ipa-sra".

2019-09-22  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (machopic_output_stub): Remove dead
	code.  Merge code blocks with common conditionals. Use declared
	macro instead of a magic number for PIC level.

2019-09-21  Martin Sebor  <msebor@redhat.com>

	PR middle-end/91830
	* gimple-ssa-warn-restrict.c (builtin_memref::set_base_and_offset):
	Simplify computation of the offset of the referenced subobject.

2019-09-21  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (machopic_legitimize_pic_address): Check
	for lra not reload.

2019-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* ira-conflicts.c (can_use_same_reg_p): New function.
	(process_reg_shuffles): Take an insn parameter.  Ignore cases
	in which input operand op_num could seemingly never be allocated
	to the same register as the destination.
	(add_insn_allocno_copies): Update call to process_reg_shuffles.

2019-09-21  Richard Sandiford  <richard.sandiford@arm.com>

	* simplify-rtx.c (neg_const_int): Replace with...
	(neg_poly_int_rtx): ...this new function.
	(simplify_binary_operation_1): Extend (minus x C) -> (plus X -C)
	to all CONST_SCALAR_INTs and to CONST_POLY_INT.
	(simplify_plus_minus): Likewise for constant terms here.

2019-09-20  Jonas Pfeil  <jonas.pfeil@uli-ulm.de>

	* config/microblaze/microblaze.h (ASM_OUTPUT_SKIP): Use
	HOST_WIDE_PRINT_UNSIGNED.

2019-09-20  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (pa_trampoline_init): Remove spurious extended
	character.

2019-09-20  Maya Rashish  <coypu@sdf.org>

	PR target/86811
	* config/vax/vax.c (TARGET_HAVE_SPECULATION_SAFE_VALUE):
	Define to speculation_safe_value_not_needed.

2019-09-20  Richard Biener  <rguenther@suse.de>
	    Uros Bizjak  <ubizjak@gmail.com>

	PR target/91814
	* config/i386/i386-features.c (gen_gpr_to_xmm_move_src): Revert
	previous change.
	(general_scalar_chain::convert_op): Force not suitable memory
	operands to a register.

2019-09-20  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91821
	* tree-vect-loop.c (check_reduction_path): Check we can compute
	reduc_idx.
	(vect_is_simple_reduction): Set STMT_VINFO_REDUC_IDX.
	* tree-vect-patterns.c (vect_reassociating_reduction_p): Return
	operands in canonical order.
	* tree-vectorizer.c (vec_info::new_stmt_vec_info): Initialize
	STMT_VINFO_REDUC_IDX.
	* tree-vectorizer.h (_stmt_vec_info::reduc_idx): New.
	(STMT_VINFO_REDUC_IDX): Likewise.

2019-09-20  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/91269
	* config/sparc/sparc.h (HARD_REGNO_CALLER_SAVE_MODE): Define.

2019-09-20  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91822
	* tree-vectorizer.h (vectorizable_condition): Restore for_reduction
	parameter.
	* tree-vect-loop.c (vectorizable_reduction): Adjust asserts
	for reduc_index in nested cycles, adjust vectorizable_condition
	calls.
	* tree-vect-stmts.c (vectorizable_condition): Restore for_reduction
	parameter.
	(vect_analyze_stmt): Adjust.
	(vect_transform_stmt): Likewise.

2019-09-20  Richard Biener  <rguenther@suse.de>

	PR target/91767
	* config/i386/i386-features.c (general_scalar_chain::convert_registers):
	Ensure there's a sequence point between allocating the new register
	and passing a reference to a reg via regno_reg_rtx.

2019-09-20  Martin Jambor  <mjambor@suse.cz>

	* coretypes.h (cgraph_edge): Declare.
	* ipa-param-manipulation.c: Rewrite.
	* ipa-param-manipulation.h: Likewise.
	* Makefile.in (GTFILES): Added ipa-param-manipulation.h and ipa-sra.c.
	(OBJS): Added ipa-sra.o.
	* cgraph.h (ipa_replace_map): Removed fields old_tree, replace_p
	and ref_p, added fields param_adjustments and performed_splits.
	(struct cgraph_clone_info): Remove ags_to_skip and
	combined_args_to_skip, new field param_adjustments.
	(cgraph_node::create_clone): Changed parameters to use
	ipa_param_adjustments.
	(cgraph_node::create_virtual_clone): Likewise.
	(cgraph_node::create_virtual_clone_with_body): Likewise.
	(tree_function_versioning): Likewise.
	(cgraph_build_function_type_skip_args): Removed.
	* cgraph.c (cgraph_edge::redirect_call_stmt_to_callee): Convert to
	using ipa_param_adjustments.
	(clone_of_p): Likewise.
	* cgraphclones.c (cgraph_build_function_type_skip_args): Removed.
	(build_function_decl_skip_args): Likewise.
	(duplicate_thunk_for_node): Adjust parameters using
	ipa_param_body_adjustments, copy param_adjustments instead of
	args_to_skip.
	(cgraph_node::create_clone): Convert to using ipa_param_adjustments.
	(cgraph_node::create_virtual_clone): Likewise.
	(cgraph_node::create_version_clone_with_body): Likewise.
	(cgraph_materialize_clone): Likewise.
	(symbol_table::materialize_all_clones): Likewise.
	* ipa-fnsummary.c (ipa_fn_summary_t::duplicate): Simplify
	ipa_replace_map check.
	* ipa-cp.c (get_replacement_map): Do not initialize removed fields.
	(initialize_node_lattices): Make aware that some parameters might have
	already been removed.
	(want_remove_some_param_p): New function.
	(create_specialized_node): Convert to using ipa_param_adjustments and
	deal with possibly pre-existing adjustments.
	* lto-cgraph.c (output_cgraph_opt_summary_p): Likewise.
	(output_node_opt_summary): Do not stream removed fields.  Stream
	parameter adjustments instead of argumetns to skip.
	(input_node_opt_summary): Likewise.
	(input_node_opt_summary): Likewise.
	* lto-section-in.c (lto_section_name): Added ipa-sra section.
	* lto-streamer.h (lto_section_type): Likewise.
	* tree-inline.h (copy_body_data): New fields killed_new_ssa_names and
	param_body_adjs.
	(copy_decl_to_var): Declare.
	* tree-inline.c (update_clone_info): Do not remap old_tree.
	(remap_gimple_stmt): Use ipa_param_body_adjustments to modify gimple
	statements, walk all extra generated statements and remap their
	operands.
	(redirect_all_calls): Add killed SSA names to a hash set.
	(remap_ssa_name): Do not remap killed SSA names.
	(copy_arguments_for_versioning): Renames to copy_arguments_nochange,
	half of functionality moved to ipa_param_body_adjustments.
	(copy_decl_to_var): Make exported.
	(copy_body): Destroy killed_new_ssa_names hash set.
	(expand_call_inline): Remap performed splits.
	(update_clone_info): Likewise.
	(tree_function_versioning): Simplify tree_map processing.  Updated to
	accept ipa_param_adjustments and use ipa_param_body_adjustments.
	* omp-simd-clone.c (simd_clone_vector_of_formal_parm_types): Adjust
	for the new interface.
	(simd_clone_clauses_extract): Likewise, make args an auto_vec.
	(simd_clone_compute_base_data_type): Likewise.
	(simd_clone_init_simd_arrays): Adjust for the new interface.
	(simd_clone_adjust_argument_types): Likewise.
	(struct modify_stmt_info): Likewise.
	(ipa_simd_modify_stmt_ops): Likewise.
	(ipa_simd_modify_function_body): Likewise.
	(simd_clone_adjust): Likewise.
	* tree-sra.c: Removed IPA-SRA.  Include tree-sra.h.
	(type_internals_preclude_sra_p): Make public.
	* tree-sra.h: New file.
	* ipa-inline-transform.c (save_inline_function_body): Update to
	refelct new tree_function_versioning signature.
	* ipa-prop.c (adjust_agg_replacement_values): Use a helper from
	ipa_param_adjustments to get current parameter indices.
	(ipcp_modif_dom_walker::before_dom_children): Likewise.
	(ipcp_update_bits): Likewise.
	(ipcp_update_vr): Likewise.
	* ipa-split.c (split_function): Convert to using ipa_param_adjustments.
	* ipa-sra.c: New file.
	* multiple_target.c (create_target_clone): Update to reflet new type
	of create_version_clone_with_body.
	* trans-mem.c (ipa_tm_create_version): Update to reflect new type of
	tree_function_versioning.
	(modify_function): Update to reflect new type of
	tree_function_versioning.
	* params.def (PARAM_IPA_SRA_MAX_REPLACEMENTS): New.
	* passes.def: Remove old IPA-SRA and add new one.
	* tree-pass.h (make_pass_early_ipa_sra): Remove declaration.
	(make_pass_ipa_sra): Declare.
	* dbgcnt.def: Remove eipa_sra.  Added ipa_sra_params and
	ipa_sra_retvalues.
	* doc/invoke.texi (ipa-sra-max-replacements): New.

2019-09-19  Martin Sebor  <msebor@redhat.com>

	PR middle-end/91631
	* builtins.c (component_size): Correct trailing array computation,
	rename to component_ref_size and move...
	(compute_objsize): Adjust.
	* gimple-ssa-warn-restrict.c (builtin_memref::refsize): New member.
	(builtin_access::strict): Do not consider memmove.
	(builtin_access::write_off): New function.
	(builtin_memref::builtin_memref): Initialize refsize.
	(builtin_memref::set_base_and_offset): Adjust refoff and compute
	refsize.
	(builtin_memref::offset_out_of_bounds): Use ooboff input values.
	Handle refsize.
	(builtin_access::builtin_access): Initialize dstoff to destination
	refeence offset here instead of in maybe_diag_overlap.  Adjust
	referencess even to unrelated objects.	Adjust sizrange of bounded
	string functions to reflect bound.  For strcat, adjust destination
	sizrange by that of source.
	(builtin_access::strcat_overlap):  Adjust offsets and sizes
	to reflect the increase in destination sizrange above.
	(builtin_access::overlap): Do not set dstoff here but instead
	in builtin_access::builtin_access.
	(check_bounds_or_overlap): Use builtin_access::write_off.
	(maybe_diag_access_bounds): Add argument.  Add informational notes.
	(dump_builtin_memref, dump_builtin_access): New functions.
	* tree.c (component_ref_size): ...to here.
	* tree.h (component_ref_size): Declare.
	* tree-ssa-strlen (handle_builtin_strcat): Include the terminating
	nul in the size of the source string.

2019-09-19  Lewis Hyatt  <lhyatt@gmail.com>

	PR c/67224
	* doc/cpp.texi: Document support for extended characters in
	identifiers.
	* doc/cppopts.texi: Likewise.

2019-09-19  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vect_is_slp_reduction): Remove.
	(check_reduction_path): New overload having the path as result.
	(vect_is_simple_reduction): From the detected reduction
	path build a SLP reduction chain if possible.

2019-09-19  Richard Biener  <rguenther@suse.de>

	PR target/91814
	* config/i386/i386-features.c (gen_gpr_to_xmm_move_src):
	Force operand to a register if it isn't nonimmediate_operand.

2019-09-19  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/arm.md (<logical_op>di3): Use <optab> and <CODE>.
	* config/arm/iterators.md (optab): Add and, ior, xor entries.
	(logical_op): Remove code attribute.
	(logical_OP): Likewise.

2019-09-19  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sort_congruence_class_groups_by_decl_uid):
	Use proper casting.

2019-09-19  Richard Henderson  <richard.henderson@linaro.org>

	* config/aarch64/aarch64.c (aarch64_print_operand): Allow integer
	registers with %R.

	* config/aarch64/aarch64.c (aarch64_gen_compare_reg): Add support
	for NE comparison of TImode values.
	(aarch64_emit_load_exclusive): Add support for TImode.
	(aarch64_emit_store_exclusive): Likewise.
	(aarch64_split_compare_and_swap): Disable strong_zero_p for TImode.
	* config/aarch64/atomics.md (@atomic_compare_and_swap<ALLI_TI>):
	Change iterator from ALLI to ALLI_TI.
	(@atomic_compare_and_swap<JUST_TI>): New.
	(@atomic_compare_and_swap<JUST_TI>_lse): New.
	(aarch64_load_exclusive_pair): New.
	(aarch64_store_exclusive_pair): New.
	* config/aarch64/iterators.md (JUST_TI): New.

	* config/aarch64/aarch64 (aarch64_split_compare_and_swap): Disable
	strong_zero_p for aarch64_track_speculation; unify some code paths;
	use aarch64_gen_compare_reg instead of open-coding.

	* config/aarch64/aarch64.opt (-moutline-atomics): New.
	* config/aarch64/aarch64.c (aarch64_atomic_ool_func): New.
	(aarch64_ool_cas_names, aarch64_ool_swp_names): New.
	(aarch64_ool_ldadd_names, aarch64_ool_ldset_names): New.
	(aarch64_ool_ldclr_names, aarch64_ool_ldeor_names): New.
	(aarch64_expand_compare_and_swap): Honor TARGET_OUTLINE_ATOMICS.
	* config/aarch64/atomics.md (atomic_exchange<ALLI>): Likewise.
	(atomic_<atomic_op><ALLI>): Likewise.
	(atomic_fetch_<atomic_op><ALLI>): Likewise.
	(atomic_<atomic_op>_fetch<ALLI>): Likewise.
	* doc/invoke.texi: Document -moutline-atomics.

2019-09-19  Feng Xue  <fxue@os.amperecomputing.com>

	* ipa-fnsummary.c (set_cond_stmt_execution_predicate): Do not compute
	trivial predicate for condition branch.
	(set_switch_stmt_execution_predicate): Do not compute trivial predicate
	for switch case.
	(compute_bb_predicates): Update predicate based on post-dominating
	relationship.
	(analyze_function_body): Calculate post-dominating information.

2019-09-19  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vectorizer.h (vectorizable_condition): Take an int
	reduction index instead of a boolean flag.
	* tree-vect-stmts.c (vectorizable_condition): Likewise.
	Swap the "then" and "else" values for EXTRACT_LAST_REDUCTION
	reductions if the reduction accumulator is the "then" rather
	than the "else" value.
	(vect_analyze_stmt): Update call accordingly.
	(vect_transform_stmt): Likewise.
	* tree-vect-loop.c (vectorizable_reduction): Likewise,
	asserting that the index is > 0.

2019-09-19  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sort_sem_items_by_decl_uid): Simplify comparator.
	(sort_congruence_classes_by_decl_uid): Likewise.
	(sort_congruence_class_groups_by_decl_uid): Use std::pair for
	easier sorting.
	(sem_item_optimizer::merge_classes): Likewise.

2019-09-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91812
	* tree-ssa-phiprop.c (propagate_with_phi): Do not replace
	volatile loads.

2019-09-19  Richard Sandiford  <richard.sandiford@arm.com>

	* defaults.h (TARGET_UNIT): New macro.
	(target_unit): New type.
	* rtl.h (native_encode_rtx, native_decode_rtx)
	(native_decode_vector_rtx, subreg_size_lsb): Declare.
	(subreg_lsb_1): Turn into an inline wrapper around subreg_size_lsb.
	* rtlanal.c (subreg_lsb_1): Delete.
	(subreg_size_lsb): New function.
	* simplify-rtx.c: Include rtx-vector-builder.h
	(simplify_immed_subreg): Delete.
	(native_encode_rtx, native_decode_vector_rtx, native_decode_rtx)
	(simplify_const_vector_byte_offset, simplify_const_vector_subreg): New
	functions.
	(simplify_subreg): Use them.
	(test_vector_subregs_modes, test_vector_subregs_repeating)
	(test_vector_subregs_fore_back, test_vector_subregs_stepped)
	(test_vector_subregs): New functions.
	(test_vector_ops): Call test_vector_subregs for integer vector
	modes with at least 2 elements.

2019-09-19  Richard Biener  <rguenther@suse.de>

	* tree-parloops.c (parloops_is_slp_reduction): Do not set
	LOOP_VINFO_OPERANDS_SWAPPED.
	(parloops_is_simple_reduction): Likewise.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Do not
	initialize operands_swapped.
	(_loop_vec_info::~_loop_vec_info): Do not re-canonicalize stmts.
	(vect_is_slp_reduction): Do not swap operands.
	* tree-vectorizer.h (_loop_vec_info::operands_swapped): Remove.
	(LOOP_VINFO_OPERANDS_SWAPPED): Likewise.

2019-09-19  Hongtao Liu <hongtao.liu@intel.com>

	PR target/87007
	* config/i386.md (*floatuns<SWI48:mode><MODEF:mode>2_avx512):
	Add avx_partial_xmm_update.

2019-09-18  Jim Wilson  <jimw@sifive.com>

	PR target/91683
	* config/riscv/riscv-protos.h (riscv_split_symbol): New bool parameter.
	(riscv_move_integer): Likewise.
	* config/riscv/riscv.c (riscv_split_integer): Pass FALSE for new
	riscv_move_integer arg.
	(riscv_legitimize_move): Likewise.
	(riscv_force_temporary): New parameter in_splitter.  Don't call
	force_reg if true.
	(riscv_unspec_offset_high): Pass FALSE for new riscv_force_temporary
	arg.
	(riscv_add_offset): Likewise.
	(riscv_split_symbol): New parameter in_splitter.  Pass to
	riscv_force_temporary.
	(riscv_legitimize_address): Pass FALSE for new riscv_split_symbol
	arg.
	(riscv_move_integer): New parameter in_splitter.  New local
	can_create_psuedo.  Don't call riscv_split_integer or force_reg when
	in_splitter TRUE.
	(riscv_legitimize_const_move): Pass FALSE for new riscv_move_integer,
	riscv_split_symbol, and riscv_force_temporary args.
	* config/riscv/riscv.md (low<mode>+1): Pass TRUE for new
	riscv_move_integer arg.
	(low<mode>+2): Pass TRUE for new riscv_split_symbol arg.

2019-09-18  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/90878
	* config/i386/x86-tune-costs.h (skylake_cost): Restore SImode
	hard register store cost to 6.

2019-09-18  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/91446
	* config/i386/x86-tune-costs.h (skylake_cost): Increase SImode
	pseudo register store cost from 3 to 6 to make it the same as
	QImode and HImode.

2019-09-18  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/91738
	* config/arm/arm.md (<logical_op>di3): Expand explicitly.
	(one_cmpldi2): Likewise.
	* config/arm/arm.c (const_ok_for_dimode_op): Return true if one
	of the constant parts is simple.
	* config/arm/iterators.md (LOGICAL): Add new code iterator.
	(logical_op): Add new code attribute.
	(logical_OP): Likewise.
	* config/arm/predicates.md (arm_anddi_operand): Add predicate.
	(arm_iordi_operand): Add predicate.
	(arm_xordi_operand): Add predicate.

2019-09-18  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/arm.md (maddsidi4): Remove expander.
	(mulsidi3adddi): Remove pattern.
	(mulsidi3adddi_v6): Likewise.
	(mulsidi3_nov6): Likewise.
	(mulsidi3_v6): Likewise.
	(umulsidi3): Remove expander.
	(umulsidi3_nov6): Remove pattern.
	(umulsidi3_v6): Likewise.
	(umulsidi3adddi): Likewise.
	(umulsidi3adddi_v6): Likewise.
	(<Us>mulsidi3): Add combined expander.
	(<Us>maddsidi4): Likewise.
	(<US>mull): Add combined umull and smull pattern.
	(<US>mlal): Likewise.
	* config/arm/iterators.md (Us): Add new iterator.

2019-09-18  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vect_is_simple_reduction): Remove operand
	swapping.
	(vectorize_fold_left_reduction): Remove assert.
	(vectorizable_reduction): Also expect COND_EXPR non-reduction
	operand in position 2.  Remove assert.

2019-09-18  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/arm.md (smulsi3_highpart): Use <US> and <SE> iterators.
	(smulsi3_highpart_nov6): Remove pattern.
	(smulsi3_highpart_v6): Likewise.
	(umulsi3_highpart): Likewise.
	(umulsi3_highpart_nov6): Likewise.
	(umulsi3_highpart_v6): Likewise.
	(<US>mull_high): Add new combined multiply pattern.

2019-09-18  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/arm.md (arm_mulsi3): Remove pattern.
	(arm_mulsi3_v6): Likewise.
	(mulsi3addsi_v6): Likewise.
	(mulsi3subsi): Likewise.
	(mul): Add new multiply pattern.
	(mla): Likewise.
	(mls): Likewise.

2019-09-18  Richard Biener  <rguenther@suse.de>

	* tree-parloops.c (report_ploop_op): Copy from report_vect_op.
	(parloops_valid_reduction_input_p): Copy from
	valid_reduction_input_p.
	(parloops_is_slp_reduction): Copy from vect_is_slp_reduction.
	(parloops_needs_fold_left_reduction_p): Copy from
	needs_fold_left_reduction_p.
	(parloops_is_simple_reduction): Copy from
	vect_is_simple_reduction.
	(parloops_force_simple_reduction): Copy from
	vect_force_simple_reduction.
	(gather_scalar_reductions): Adjust.
	* tree-vect-loop.c (vect_force_simple_reduction): Make static.
	* tree-vectorizer.h (vect_force_simple_reduction): Remove.

2019-09-18  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (get_initial_def_for_reduction): Remove.
	* tree-vect-loop.c (get_initial_def_for_reduction): Make
	static.
	(vect_create_epilog_for_reduction): Remove dead code.

2019-09-18  Richard Sandiford  <richard.sandiford@arm.com>

	* varasm.c (assemble_real): Generate canonical const_ints.

2019-09-18  Richard Biener  <rguenther@suse.de>

	PR lto/91763
	* lto-streamer-in.c (input_eh_regions): Move EH init to
	lto_materialize_function.
	* tree-streamer-in.c (lto_input_ts_function_decl_tree_pointers):
	Likewise.

2019-09-18  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-ssa-ccp.c (get_value_for_expr): Check whether CONSTANTs
	are INTEGER_CSTs.

2019-09-18  Richard Sandiford  <richard.sandiford@arm.com>

	* gimplify.c (gimplify_decl_expr): Use poly_int_tree_p instead
	of checking specifically for INTEGER_CST.

2019-09-18  Richard Sandiford  <richard.sandiford@arm.com>

	* stor-layout.c (compute_record_mode): Operate on poly_uint64
	sizes instead of uhwi sizes.

2019-09-18  Richard Sandiford  <richard.sandiford@arm.com>

	* dwarf2out.c (loc_list_from_tree_1): Handle POLY_INT_CST.
	(add_const_value_attribute): Handle CONST_POLY_INT.

2019-09-18  Martin Liska  <mliska@suse.cz>

	* dbgcnt.def (store_merging): New counter.
	* gimple-ssa-store-merging.c (imm_store_chain_info::output_merged_stores):
	Use it in store merging.

2019-09-17  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_sched_variable_issue): New
	function.
	(TARGET_SCHED_VARIABLE_ISSUE): New macro.
	* config/arm/arm.c (arm_sched_variable_issue): New function.
	(TARGET_SCHED_VARIABLE_ISSUE): New macro.

2019-09-17  Richard Sandiford  <richard.sandiford@arm.com>

	* config/arm/types.md (no_reservation): New reservation.
	* config/aarch64/falkor.md (falkor_other_0_nothing): Don't handle
	no_insn here.
	* config/aarch64/saphira.md (saphira_other_0_nothing): Likewise.
	* config/aarch64/thunderx2t99.md (thunderx2t99_nothing): Likewise.
	* config/aarch64/tsv110.md (tsv110_alu): Likewise.
	* config/arm/arm1020e.md (1020alu_op): Likewise.
	* config/arm/arm1026ejs.md (alu_op): Likewise.
	* config/arm/arm1136jfs.md (11_alu_op): Likewise.
	* config/arm/arm926ejs.md (9_alu_op): Likewise.
	* config/arm/cortex-a15.md (cortex_a15_alu): Likewise.
	* config/arm/cortex-a17.md (cortex_a17_alu): Likewise.
	* config/arm/cortex-a5.md (cortex_a5_alu): Likewise.
	* config/arm/cortex-a53.md (cortex_a53_alu): Likewise.
	* config/arm/cortex-a57.md (cortex_a57_alu): Likewise.
	* config/arm/cortex-a7.md (cortex_a7_alu_shift): Likewise.
	* config/arm/cortex-a8.md (cortex_a8_alu): Likewise.
	* config/arm/cortex-a9.md (cortex_a9_dp): Likewise.
	* config/arm/cortex-m4.md (cortex_m4_alu): Likewise.
	* config/arm/cortex-m7.md (cortex_m7_alu_simple): Likewise.
	* config/arm/cortex-r4.md (cortex_r4_alu_shift_reg): Likewise.
	* config/arm/fa526.md (526_alu_op): Likewise.
	* config/arm/fa606te.md (606te_alu_op): Likewise.
	* config/arm/fa626te.md (626te_alu_op): Likewise.
	* config/arm/fa726te.md (726te_alu_op): Likewise.
	* config/arm/xgene1.md (xgene1_nop): Likewise.

2019-09-17  Richard Sandiford  <richard.sandiford@arm.com>

	* config/arm/thumb1.md (*thumb1_tablejump): Change type from
	"no_insn" to "branch".

2019-09-17  Richard Sandiford  <richard.sandiford@arm.com>

	* array-traits.h (array_traits<T[N]>::size): Remove parameter name.

2019-09-17  Richard Biener  <rguenther@suse.de>

	PR debug/91772
	* dwarf2out.c (dwarf2out_late_global_decl): If early dwarf
	was missing generate locations only once.

2019-09-17  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/91089
	* doc/invoke.texi (ipa-max-switch-predicate-bounds): Document new
	option.
	* params.def (PARAM_IPA_MAX_SWITCH_PREDICATE_BOUNDS): New.
	* ipa-fnsummary.c (set_switch_stmt_execution_predicate): Add predicate
	for switch default case using range analysis information.

2019-09-17  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/91749
	* config/arm/arm.c (arm_valid_target_attribute_rec): Make sure the
	mode attributed is supported by FDPIC.

2019-09-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91790
	* tree-vect-stmts.c (vectorizable_load): For BB vectorization
	use the correct DR for setting up realignment.

2019-09-16  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91719
	* config/i386/i386.h (TARGET_USE_XCHG_FOR_ATOMIC_STORE): New macro.
	* config/i386/x86-tune.def (X86_TUNE_USE_XCHG_FOR_ATOMIC_STORE): New.
	* config/i386/sync.md (atomic_store<mode>): emit XCHG for
	TARGET_USE_XCHG_FOR_ATOMIC_STORE.

2019-09-16  Jason Merrill  <jason@redhat.com>

	* Makefile.in (build/genmatch.o): Depend on $(CPPLIB_H).

2019-09-16  Martin Liska  <mliska@suse.cz>

	* gimple-fold.c (or_comparisons_1): Remove rules moved
	to ...
	* match.pd: ... here.

2019-09-16  Martin Liska  <mliska@suse.cz>

	* gimple-fold.c (or_comparisons_1): Remove rules
	moved to ...
	* match.pd: ... here.

2019-09-16  Martin Liska  <mliska@suse.cz>

	* genmatch.c (dt_node::append_simplify): Do not print
	warning when we have duplicate patterns belonging
	to a same simplify rule.
	* gimple-fold.c (and_comparisons_1): Remove matching moved to match.pd.
	(maybe_fold_comparisons_from_match_pd): Handle
	tcc_comparison as a results.
	* match.pd: Handle (X == CST1) && (X OP2 CST2) conditions.

2019-09-16  Li Jia He  <helijia@linux.ibm.com>
	    Qi Feng  <ffengqi@linux.ibm.com>

	PR middle-end/88784
	* match.pd (x >  y  &&  x != XXX_MIN): Optimize into 'x > y'.
	(x >  y  &&  x == XXX_MIN): Optimize into 'false'.
	(x <= y  &&  x == XXX_MIN): Optimize into 'x == XXX_MIN'.
	(x <  y  &&  x != XXX_MAX): Optimize into 'x < y'.
	(x <  y  &&  x == XXX_MAX): Optimize into 'false'.
	(x >= y  &&  x == XXX_MAX): Optimize into 'x == XXX_MAX'.
	(x >  y  ||  x != XXX_MIN): Optimize into 'x != XXX_MIN'.
	(x <= y  ||  x != XXX_MIN): Optimize into 'true'.
	(x <= y  ||  x == XXX_MIN): Optimize into 'x <= y'.
	(x <  y  ||  x != XXX_MAX): Optimize into 'x != XXX_MAX'.
	(x >= y  ||  x != XXX_MAX): Optimize into 'true'.
	(x >= y  ||  x == XXX_MAX): Optimize into 'x >= y'.

2019-09-16  Li Jia He  <helijia@linux.ibm.com>
	    Martin Liska  <mliska@suse.cz>

	* gimple-fold.c (and_comparisons_1): Add type as first
	argument.
	(and_var_with_comparison): Likewise.
	(and_var_with_comparison_1): Likewise.
	(or_comparisons_1): Likewise.
	(or_var_with_comparison): Likewise.
	(or_var_with_comparison_1): Likewise.
	(maybe_fold_and_comparisons): Call maybe_fold_comparisons_from_match_pd.
	(maybe_fold_or_comparisons): Likewise.
	(maybe_fold_comparisons_from_match_pd): New.
	* gimple-fold.h (maybe_fold_and_comparisons): Add type argument.
	(maybe_fold_or_comparisons): Likewise.
	* gimple.c (gimple_size): Make it public and add num_ops argument.
	(gimple_init): New function.
	(gimple_alloc): Call gimple_init.
	* gimple.h (gimple_size): New.
	(gimple_init): Likewise.
	* tree-if-conv.c (fold_or_predicates): Pass type.
	* tree-ssa-ifcombine.c (ifcombine_ifandif): Likewise.
	* tree-ssa-reassoc.c (eliminate_redundant_comparison): Likewise.
	(optimize_vec_cond_expr): Likewise.
	(ovce_extract_ops): Return type of conditional expression.
	* tree-ssanames.c (init_ssa_name_imm_use): New.
	(make_ssa_name_fn): Use init_ssa_name_imm_use.
	* tree-ssanames.h (init_ssa_name_imm_use): New.

2019-09-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91756
	PR tree-optimization/87132
	* tree-ssa-alias.h (enum translate_flags): New.
	(get_continuation_for_phi): Use it instead of simple bool flag.
	(walk_non_aliased_vuses): Likewise.
	* tree-ssa-alias.c (maybe_skip_until): Adjust.
	(get_continuation_for_phi): When looking across backedges only
	disallow valueization.
	(walk_non_aliased_vuses): Adjust.
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Avoid valueization
	if requested.

2019-09-14  Kewen Lin  <linkw@gcc.gnu.org>

	PR middle-end/80791
	* config/rs6000/rs6000.c (TARGET_HAVE_COUNT_REG_DECR_P): New macro.
	(TARGET_DOLOOP_COST_FOR_GENERIC): Likewise.
	(TARGET_DOLOOP_COST_FOR_ADDRESS): Likewise.
	* target.def (have_count_reg_decr_p): New hook.
	(doloop_cost_for_generic): Likewise.
	(doloop_cost_for_address): Likewise.
	* doc/tm.texi.in (TARGET_HAVE_COUNT_REG_DECR_P): Likewise.
	(TARGET_DOLOOP_COST_FOR_GENERIC): Likewise.
	(TARGET_DOLOOP_COST_FOR_ADDRESS): Likewise.
	* doc/tm.texi: Regenerate.
	* tree-ssa-loop-ivopts.c (comp_cost::operator+=): Consider infinite cost
	addend.
	(record_group): Init doloop_p.
	(add_candidate_1): Add optional argument doloop, change the handlings
	accordingly.
	(add_candidate): Likewise.
	(generic_predict_doloop_p): Update attribute.
	(force_expr_to_var_cost): Add costing for expressions COND_EXPR/LT_EXPR/
	LE_EXPR/GT_EXPR/GE_EXPR/EQ_EXPR/NE_EXPR/UNORDERED_EXPR/ORDERED_EXPR/
	UNLT_EXPR/UNLE_EXPR/UNGT_EXPR/UNGE_EXPR/UNEQ_EXPR/LTGT_EXPR/MAX_EXPR/
	MIN_EXPR.
	(get_computation_cost): Update for doloop IV cand extra cost.
	(determine_group_iv_cost_cond): Update for doloop IV cand.
	(determine_iv_cost): Likewise.
	(ivopts_estimate_reg_pressure): Likewise.
	(may_eliminate_iv): Update handlings for doloop IV cand.
	(add_iv_candidate_for_doloop): New function.
	(find_iv_candidates): Call function add_iv_candidate_for_doloop.
	(iv_ca_set_no_cp): Update for doloop IV cand.
	(iv_ca_set_cp): Likewise.
	(iv_ca_dump): Dump register cost.
	(find_doloop_use): New function.
	(analyze_and_mark_doloop_use): Likewise.
	(tree_ssa_iv_optimize_loop): Call function analyze_and_mark_doloop_use.

2019-09-13  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR middle-end/91708
	* cse.c (cse_insn): Do not replace anything with a
	MEM.

2019-09-13  Ian Lance Taylor  <iant@golang.org>

	* doc/invoke.texi (Optimize Options): Fix typo.

2019-09-12  Uroš Bizjak  <ubizjak@gmail.com>

	PR tree-optimization/89386
	* config/i386/sse.md (smulhrs<mode>3): New expander.
	(smulhrsv4hi3): Ditto.

2019-09-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91750
	* tree-vect-loop.c (vectorizable_induction): Compute IV increments
	in the type of the evolution.

2019-09-12  Yuliang Wang  <yuliang.wang@arm.com>

	PR tree-optimization/89386
	* config/aarch64/aarch64-sve2.md (<su>mull<bt><Vwide>)
	(<r>shrnb<mode>, <r>shrnt<mode>): New SVE2 patterns.
	(<su>mulh<r>s<mode>3): New pattern for MULHRS.
	* config/aarch64/iterators.md (UNSPEC_SMULLB, UNSPEC_SMULLT)
	(UNSPEC_UMULLB, UNSPEC_UMULLT, UNSPEC_SHRNB, UNSPEC_SHRNT)
	(UNSPEC_RSHRNB, UNSPEC_RSHRNT, UNSPEC_SMULHS, UNSPEC_SMULHRS)
	UNSPEC_UMULHS, UNSPEC_UMULHRS): New unspecs.
	(MULLBT, SHRNB, SHRNT, MULHRS): New int iterators.
	(su, r): Handle the unspecs above.
	(bt): New int attribute.
	* internal-fn.def (IFN_MULHS, IFN_MULHRS): New internal functions.
	* internal-fn.c (first_commutative_argument): Commutativity info for
	above.
	* optabs.def (smulhs_optab, smulhrs_optab, umulhs_optab)
	(umulhrs_optab): New optabs.
	* doc/md.texi (smulhs$var{m3}, umulhs$var{m3})
	(smulhrs$var{m3}, umulhrs$var{m3}): Documentation for the above.
	* tree-vect-patterns.c (vect_recog_mulhs_pattern): New pattern
	function.
	(vect_vect_recog_func_ptrs): Add it.

2019-09-11  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (non_add_cint_operand): Simplify the
	code.

2019-09-11  Nathan Sidwell  <nathan@acm.org>

	* tree.h (MARK_TS_TYPE_NON_COMMON): New.
	* tree.c (tree_node_structure_for_code): Reformat and alphabetize.

2019-09-11  Richard Biener  <rguenther@suse.de>

	* lto-opts.c (lto_write_options): Stream -g when debug is enabled.
	* lto-wrapper.c (merge_and_complain): Pick up -g.
	(append_compiler_options): Likewise.
	(run_gcc): Re-instantiate handling -g0 at link-time.
	* doc/invoke.texi (flto): Document debug info generation.

2019-09-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90387
	* vr-values.c (vr_values::extract_range_basic): After inlining
	simplify non-constant __builtin_constant_p to false.

2019-09-11  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/89795
	* rtlanal.c (nonzero_bits1) <SUBREG>: Do not propagate results from
	inner REGs to paradoxical SUBREGs if WORD_REGISTER_OPERATIONS is set.

2019-09-11  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91723
	* tree-vect-stmts.c (vectorizable_call): Use types_compatible_p check
	instead of pointer equality when checking if argument vectypes are
	the same.

	PR middle-end/91725
	* match.pd ((A / (1 << B)) -> (A >> B)): Call tree_nonzero_bits instead
	of get_nonzero_bits, only call it for integral types.

2019-09-11  Richard Biener  <rguenther@suse.de>

	Revert
	2019-09-09  Barnaby Wilks  <barnaby.wilks@arm.com>

	* match.pd: Add flag_unsafe_math_optimizations check
	before deciding on the widest type in a binary math operation.

2019-09-10  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/tm.texi.in: Document that exactly one of CALL_USED_REGISTERS
	and CALL_REALLY_USED_REGISTERS must be defined, and that
	CALL_REALLY_USED_REGISTERS is preferred.
	* doc/tm.texi: Regenerate.
	* hard-reg-set.h (target_hard_regs::x_call_really_used_regs): Delete.
	(call_really_used_regs): Likewise.
	* reginfo.c: Raise an #error if both CALL_USED_REGISTERS and
	CALL_REALLY_USED_REGISTERS are defined.
	(initial_call_used_regs): Use CALL_REALLY_USED_REGISTERS as the
	initial value if defined.
	(initial_call_really_used_regs): Delete.
	(saved_call_really_used_regs): Likewise.
	(CALL_REALLY_USED_REGNO_P): Likewise.
	(init_reg_sets): Remove handling of call_really_used_regs.
	(save_register_info, restore_register_info, globalize_reg): Likewise.
	(init_reg_sets_1): Likewise.  Use call_used_regs instead of
	CALL_REALLY_USED_REGNO_P.  Don't set call_used_regs for registers
	outside operand_reg_set.
	(fix_register): Don't change call_used_regs if
	CALL_REALLY_USED_REGISTERS is defined.
	* config/csky/csky.h (CALL_USED_REGISTERS): Delete.
	* config/csky/csky.c (get_csky_live_regs): Use call_used_regs
	instead of call_really_used_regs.
	(csky_conditional_register_usage): Remove the old handling of
	call_used_regs and change the handling of call_really_used_regs
	to use call_used_regs instead.
	* config/ia64/ia64.h (CALL_USED_REGISTERS): Delete.
	* config/ia64/ia64.c (fix_range): Don't set call_used_regs when
	making a register fixed.
	* config/m32r/m32r.h (CALL_USED_REGISTERS): Delete.
	* config/m32r/m32r.c (MUST_SAVE_REGISTER): Use call_used_regs
	instead of call_really_used_regs.
	(m32r_conditional_register_usage): Don't set call_used_regs when
	making a register fixed.
	* config/mips/mips.h (CALL_USED_REGISTERS): Delete.
	* config/mips/mips.c (mips_global_pointer): Use call_used_regs
	instead of call_really_used_regs.
	(mips_interrupt_extra_call_saved_reg_p): Likewise.
	(mips_cfun_call_saved_reg_p): Likewise.
	(mips_swap_registers): Remove the old handling of call_used_regs
	and change the handling of call_really_used_regs to use call_used_regs
	instead.
	(mips_conditional_register_usage): Likewise.
	* config/mn10300/mn10300.h (CALL_USED_REGISTERS): Delete.
	* config/mn10300/mn10300.c (fp_regs_to_save): Use call_used_regs
	instead of call_really_used_regs.
	(mn10300_get_live_callee_saved_regs): Likewise.
	(mn10300_expand_prologue, mn10300_expand_epilogue): Likewise.
	(mn10300_conditional_register_usage): Don't set call_used_regs when
	making a register fixed.
	* config/rs6000/rs6000.h (CALL_USED_REGISTERS): Delete.
	* config/rs6000/rs6000.c (rs6000_conditional_register_usage):
	Remove the old handling of call_used_regs and change the handling
	of call_really_used_regs to use call_used_regs instead.
	* config/s390/s390.h (CALL_USED_REGISTERS): Delete.
	* config/s390/s390.c (s390_regs_ever_clobbered): Use call_used_regs
	instead of call_really_used_regs.
	(s390_register_info_gprtofpr, s390_register_info): Likewise.
	(s390_hard_regno_rename_ok, s390_hard_regno_scratch_ok): Likewise.
	(s390_emit_prologue, s300_set_up_by_prologue): Likewise.
	(s390_can_use_return_insn, s390_optimize_prologue): Likewise.
	(s390_conditional_register_usage): Remove the old handling of
	call_used_regs and change the handling of call_really_used_regs
	to use call_used_regs instead.
	* config/sh/sh.h (CALL_USED_REGISTERS): Delete.
	* config/sh/sh.c (output_stack_adjust, calc_live_regs): Likewise.
	(sh_fix_range, reg_unused_after): Likewise.
	(sh_conditional_register_usage): Remove the old handling of
	call_used_regs and change the handling of call_really_used_regs
	to use call_used_regs instead.
	* config/sparc/sparc.h (CALL_USED_REGISTERS): Delete.
	* config/sparc/sparc.c (sparc_conditional_register_usage): Don't set
	call_used_regs when making a register fixed.
	* config/tilegx/tilegx.h (CALL_USED_REGISTERS): Delete.
	* config/tilegx/tilegx.c (tilegx_conditional_register_usage): Don't set
	call_used_regs when making a register fixed.
	* config/tilepro/tilepro.h (CALL_USED_REGISTERS): Delete.
	* config/tilepro/tilepro.c (tilepro_conditional_register_usage): Don't
	set call_used_regs when making a register fixed.
	* config/visium/visium.h (CALL_USED_REGISTERS): Delete.
	* config/visium/visium.c (visium_conditional_register_usage): Remove
	the old handling of call_used_regs and change the handling of
	call_really_used_regs to use call_used_regs instead.

2019-09-10  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (call_used_regs): Only define if IN_TARGET_CODE.
	(call_used_or_fixed_reg_p): Expand definition of call_used_regs.
	* reginfo.c (call_used_regs): New macro.

2019-09-10  Richard Sandiford  <richard.sandiford@arm.com>

	* config/alpha/alpha.c (alpha_compute_frame_layout): Remove redundant
	fixed_regs test.
	* config/bpf/bpf.c (bpf_compute_frame_layout, bpf_expand_prologue)
	(bpf_expand_epilogue): Likewise.
	* config/c6x/c6x.c (c6x_save_reg): Likewise.
	* config/ft32/ft32.c (ft32_expand_prologue): Likewise.
	(ft32_expand_epilogue): Likewise.
	* config/i386/i386.c (ix86_save_reg): Likewise.
	* config/moxie/moxie.c (moxie_expand_prologue): Likewise.
	(moxie_expand_epilogue): Likewise.
	* config/tilegx/tilegx.c (need_to_save_reg): Likewise.
	* config/tilepro/tilepro.c (need_to_save_reg): Likewise.
	* config/xtensa/xtensa.c (xtensa_call_save_reg): Likewise.

2019-09-10  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (call_used_or_fixed_reg_p): New macro.
	* cfgloopanal.c (init_set_costs): Use call_used_or_fixed_reg_p
	instead of testing call_used_regs directly.
	* config/aarch64/aarch64.c (aarch64_layout_frame): Likewise.
	(aarch64_components_for_bb): Likewise.
	* config/alpha/alpha.c (alpha_compute_frame_layout): Likewise.
	* config/arc/arc.c (arc_must_save_register): Likewise.
	(arc_epilogue_uses): Likewise.
	* config/arm/arm.c (arm_option_override, use_return_insn): Likewise.
	(legitimize_pic_address, callee_saved_reg_p): Likewise.
	(arm_compute_save_reg0_reg12_mask): Likewise.
	(arm_compute_save_core_reg_mask): Likewise.
	(arm_get_vfp_saved_size, arm_compute_frame_layout): Likewise.
	(arm_save_coproc_regs, thumb1_extra_regs_pushed): Likewise.
	(cmse_nonsecure_entry_clear_before_return): Likewise.
	(thumb1_expand_epilogue, arm_expand_epilogue_apcs_frame): Likewise.
	(arm_expand_epilogue): Likewise.
	* config/avr/avr.c (avr_regs_to_save, sequent_regs_live): Likewise.
	(avr_function_arg_advance, avr_find_unused_d_reg): Likewise.
	(_reg_unused_after): Likewise.
	* config/bfin/bfin.c (must_save_p, expand_prologue_reg_save): Likewise.
	(expand_epilogue_reg_restore, n_regs_saved_by_prologue): Likewise.
	(add_to_reg, hwloop_optimize): Likewise.
	* config/bpf/bpf.c (bpf_compute_frame_layout, bpf_expand_prologue)
	(bpf_expand_epilogue): Likewise.
	* config/c6x/c6x.c (c6x_save_reg, c6x_regno_reg_class): Likewise.
	* config/cr16/cr16.c (cr16_compute_save_regs): Likewise.
	* config/cris/cris.c (cris_reg_saved_in_regsave_area): Likewise.
	* config/epiphany/epiphany.c (epiphany_init_reg_tables): Likewise.
	(epiphany_compute_function_type, MUST_SAVE_REGISTER): Likewise.
	(epiphany_output_mi_thunk, epiphany_start_function): Likewise.
	* config/fr30/fr30.c (fr30_num_arg_regs): Likewise.
	* config/frv/frv.c (frv_stack_info): Likewise.
	* config/ft32/ft32.c (ft32_compute_frame): Likewise.
	(ft32_expand_prologue, ft32_expand_epilogue): Likewise.
	* config/gcn/gcn.c (gcn_compute_frame_offsets): Likewise.
	(move_callee_saved_registers): Likewise.
	* config/h8300/h8300.c (byte_reg): Likewise.
	* config/i386/i386-options.c (ix86_set_current_function): Likewise.
	* config/i386/i386.c (ix86_save_reg, ix86_expand_prologue): Likewise.
	(ix86_expand_epilogue, x86_order_regs_for_local_alloc): Likewise.
	* config/i386/predicates.md (sibcall_memory_operand): Likewise.
	* config/ia64/ia64.c (emit_safe_across_calls, find_gr_spill): Likewise.
	(next_scratch_gr_reg, ia64_compute_frame_size): Likewise.
	* config/iq2000/iq2000.h (MUST_SAVE_REGISTER): Likewise.
	* config/lm32/lm32.c (lm32_compute_frame_size): Likewise.
	* config/m32c/m32c.c (need_to_save): Likewise.
	* config/m68k/m68k.c (m68k_save_reg): Likewise.
	* config/mcore/mcore.c (calc_live_regs): Likewise.
	* config/microblaze/microblaze.c (microblaze_must_save_register):
	Likewise.
	* config/mmix/mmix.c (mmix_local_regno): Likewise.
	(mmix_initial_elimination_offset, mmix_reorg): Likewise.
	(mmix_use_simple_return, mmix_expand_prologue): Likewise.
	(mmix_expand_epilogue): Likewise.
	* config/moxie/moxie.c (moxie_compute_frame): Likewise.
	(moxie_expand_prologue, moxie_expand_epilogue): Likewise.
	* config/msp430/msp430.c (msp430_preserve_reg_p): Likewise.
	* config/nds32/nds32.h (nds32_16bit_address_type): Likewise.
	(NDS32_REQUIRED_CALLEE_SAVED_P): Likewise.
	* config/nios2/nios2.c (prologue_saved_reg_p): Likewise.
	* config/or1k/or1k.c (callee_saved_regno_p): Likewise.
	* config/pa/pa.c (pa_expand_prologue, pa_expand_epilogue): Likewise.
	* config/pdp11/pdp11.c (pdp11_saved_regno): Likewise.
	* config/pru/pru.c (prologue_saved_reg_p): Likewise.
	* config/riscv/riscv.c (riscv_save_reg_p): Likewise.
	(riscv_epilogue_uses, riscv_hard_regno_mode_ok): Likewise.
	* config/rl78/rl78.c (need_to_save): Likewise.
	* config/rs6000/rs6000-logue.c (save_reg_p): Likewise.
	(rs6000_stack_info, generate_set_vrsave): Likewise.
	(rs6000_emit_prologue, rs6000_emit_epilogue): Likewise.
	* config/rs6000/rs6000.c (rs6000_debug_reg_print): Likewise.
	* config/rx/rx.c (rx_get_stack_layout): Likewise.
	* config/s390/s390.c (s390_call_saved_register_used): Likewise.
	* config/sh/sh.c (calc_live_regs, sh_output_mi_thunk): Likewise.
	* config/sparc/sparc.c (save_global_or_fp_reg_p): Likewise.
	(save_local_or_in_reg_p): Likewise.
	* config/stormy16/stormy16.c (REG_NEEDS_SAVE): Likewise.
	(xstormy16_epilogue_uses): Likewise.
	* config/tilegx/tilegx.c (need_to_save_reg): Likewise.
	* config/tilepro/tilepro.c (need_to_save_reg): Likewise.
	* config/v850/v850.c (compute_register_save_size): Likewise.
	* config/vax/vax.c (vax_expand_prologue): Likewise.
	* config/visium/visium.c (visium_save_reg_p): Likewise.
	* config/xtensa/xtensa.c (xtensa_call_save_reg): Likewise.
	* cselib.c (cselib_process_insn): Likewise.
	* df-scan.c (df_get_entry_block_def_set): Likewise.
	* function.c (aggregate_value_p): Likewise.
	* haifa-sched.c (alloc_global_sched_pressure_data): Likewise.
	* ira-lives.c (process_bb_node_lives): Likewise.
	* ira.c (do_reload): Likewise.
	* lra-lives.c (process_bb_lives): Likewise.
	* lra-remat.c (lra_remat): Likewise.
	* lra.c (lra): Likewise.
	* postreload.c (reload_combine_recognize_pattern): Likewise.
	(reload_cse_move2add): Likewise.
	* recog.c (peep2_find_free_register): Likewise.
	* regrename.c (check_new_reg_p): Likewise.
	* reload.c (find_equiv_reg): Likewise.
	* reload1.c (reload, find_reg): Likewise.
	* sel-sched.c (init_hard_regs_data): Likewise.

2019-09-10  Richard Sandiford  <richard.sandiford@arm.com>

	* config/frv/frv.c (frv_ifcvt_modify_tests): Use
	regs_invalidated_by_call & ~fixed_reg_set instead of
	call_used_or_fixed_regs & ~fixed_reg_set.
	* config/sh/sh.c (output_stack_adjust): Likewise.

2019-09-10  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (target_hard_regs::x_call_used_reg_set): Delete.
	(call_used_reg_set): Delete.
	(call_used_or_fixed_regs): New macro.
	* reginfo.c (init_reg_sets_1, globalize_reg): Remove initialization
	of call_used_reg_set.
	* caller-save.c (setup_save_areas): Use call_used_or_fixed_regs
	instead of call_used_regs.
	(save_call_clobbered_regs): Likewise.
	* cfgcleanup.c (old_insns_match_p): Likewise.
	* config/c6x/c6x.c (c6x_call_saved_register_used): Likewise.
	* config/epiphany/epiphany.c (epiphany_conditional_register_usage):
	Likewise.
	* config/frv/frv.c (frv_ifcvt_modify_tests): Likewise.
	* config/sh/sh.c (output_stack_adjust): Likewise.
	* final.c (collect_fn_hard_reg_usage): Likewise.
	* ira-build.c (ira_build): Likewise.
	* ira-color.c (calculate_saved_nregs): Likewise.
	(allocno_reload_assign, calculate_spill_cost): Likewise.
	* ira-conflicts.c (ira_build_conflicts): Likewise.
	* ira-costs.c (ira_tune_allocno_costs): Likewise.
	* ira-lives.c (process_bb_node_lives): Likewise.
	* ira.c (setup_reg_renumber): Likewise.
	* lra-assigns.c (find_hard_regno_for_1, lra_assign): Likewise.
	* lra-constraints.c (need_for_call_save_p): Likewise.
	(need_for_split_p, inherit_in_ebb): Likewise.
	* lra-lives.c (process_bb_lives): Likewise.
	* lra-remat.c (call_used_input_regno_present_p): Likewise.
	* postreload.c (reload_combine): Likewise.
	* regrename.c (find_rename_reg): Likewise.
	* reload1.c (reload_as_needed): Likewise.
	* rtlanal.c (find_all_hard_reg_sets): Likewise.
	* sel-sched.c (mark_unavailable_hard_regs): Likewise.
	* shrink-wrap.c (requires_stack_frame_p): Likewise.

2019-09-10  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (target_hard_regs::x_no_caller_save_reg_set): Delete.
	(no_caller_save_reg_set): Delete.
	* caller-save.c (init_caller_save): Don't initialize it.
	* ira-conflicts.c (ira_build_conflicts): Calculate
	no_caller_save_reg_set locally from call_used_reg_set and savable_regs.

2019-09-10  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (target_hard_regs::x_call_fixed_reg_set): Delete.
	(target_hard_regs::x_savable_regs): New field.
	(call_fixed_reg_set): Delete.
	(savable_regs): New macro,
	* reginfo.c (globalize_reg): Don't set call_fixed_reg_set.
	(init_reg_sets_1): Likewise.  Initialize savable_regs.
	* caller-save.c (init_caller_save): Invoke HARD_REGNO_CALLER_SAVE_MODE
	for all registers.  Set savable_regs instead of call_fixed_reg_set.
	(setup_save_areas, save_call_clobbered_regs): Replace uses of
	~call_fixed_reg_set with ~fixed_reg_set & savable_regs.
	* config/sh/sh.c (output_stack_adjust): Likewise.

2019-09-10  Richard Sandiford  <richard.sandiford@arm.com>

	* config/c6x/c6x-protos.h (c6x_set_return_address): Declare.
	* config/c6x/c6x.h (REGNO_REG_CLASS): Move implementation to
	* config/c6x/c6x.c (c6x_regno_reg_class): ...this new function.

2019-09-10  Richard Sandiford  <richard.sandiford@arm.com>

	* rtl.h (get_call_rtx_from): Take a const rtx_insn * instead of an rtx.
	* rtlanal.c (get_call_rtx_from): Likewise.
	* dwarf2out.c (dwarf2out_var_location): Pass the insn rather
	than the pattern to get_call_rtx_from.
	* config/i386/i386-expand.h (ix86_notrack_prefixed_insn_p): Take
	an rtx_insn * instead of an rtx.
	* config/i386/i386-expand.c (ix86_notrack_prefixed_insn_p): Likewise.

2019-09-10  Martin Liska  <mliska@suse.cz>

	* common.opt: Use newly added WarnRemoved.
	* config/aarch64/aarch64.opt: Likewise.
	* config/arm/arm.opt: Likewise.
	* config/i386/i386.opt: Likewise.
	* config/ia64/ia64.opt: Likewise.
	* config/rs6000/rs6000.opt: Likewise.
	* doc/options.texi: Document WarnRemoved properly.
	* dwarf2out.c (gen_producer_string): Handle renamed
	OPT_SPECIAL_warn_removed.
	* lto-opts.c (lto_write_options): Likewise.
	* lto-wrapper.c (merge_and_complain): Likewise.
	* opts-common.c (decode_cmdline_option): Likewise.
	(prune_options): Likewise.
	(read_cmdline_option): Likewise.
	(control_warning_option): Likewise.
	* opts.c (print_filtered_help): Likewise.
	* optc-gen.awk: Parse for WarnRemoved and make usage
	of Deprecated an error.
	* opth-gen.awk: Generate new OPT_SPECIAL_warn_removed.

2019-09-10  Arnaud Charlet  <charlet@adacore.com>

	* doc/install.texi: Fix syntax for html generation.

2019-09-10  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/91680
	* match.pd ((A / (1 << B)) -> (A >> B)): Allow widening cast from
	the shift type to type.

2019-09-10  Christophe Lyon  <christophe.lyon@st.com>

	* config/arm/arm.md (stack_protect_combined_set_insn): Handle
	FDPIC mode.
	(stack_protect_combined_test_insn): Likewise.

2019-09-10  Christophe Lyon  <christophe.lyon@st.com>
	    Mickaël Guêné <mickael.guene@st.com>

	* config/arm/arm.c (arm_load_tp): Add FDPIC support.
	* config/arm/arm.md (FDPIC_REGNUM): New constant.
	(load_tp_soft_fdpic): New pattern.
	(load_tp_soft): Disable in FDPIC mode.

2019-09-10  Christophe Lyon  <christophe.lyon@st.com>
	    Mickaël Guêné <mickael.guene@st.com>

	* config/arm/arm.c (tls_reloc): Add TLS_GD32_FDPIC,
	TLS_LDM32_FDPIC and TLS_IE32_FDPIC.
	(arm_call_tls_get_addr): Add FDPIC support.
	(legitimize_tls_address): Likewise.
	(arm_emit_tls_decoration): Likewise.

2019-09-10  Christophe Lyon  <christophe.lyon@st.com>
	    Mickaël Guêné <mickael.guene@st.com>

	* config/arm/arm.c (arm_asm_trampoline_template): Add FDPIC
	support.
	(arm_trampoline_init): Likewise.
	(arm_trampoline_adjust_address): Likewise.
	* config/arm/arm.h (TRAMPOLINE_SIZE): Likewise.

2019-09-10  Christophe Lyon  <christophe.lyon@st.com>
	    Mickaël Guêné <mickael.guene@st.com>

	* config/arm/arm.c (arm_fdpic_local_funcdesc_p): New function.
	(legitimize_pic_address): Enforce binding rules on function
	pointers in FDPIC mode.
	(arm_assemble_integer): Likewise.

2019-09-10  Christophe Lyon  <christophe.lyon@st.com>
	    Mickaël Guêné <mickael.guene@st.com>

	* config/arm/arm.h (PIC_REGISTER_MAY_NEED_SAVING): New helper.
	* config/arm/arm.c (arm_compute_save_reg0_reg12_mask): Handle
	FDPIC.

2019-09-10  Christophe Lyon  <christophe.lyon@st.com>
	    Mickaël Guêné <mickael.guene@st.com>

	* ginclude/unwind-arm-common.h (unwinder_cache): Add reserved5
	field.

2019-09-10  Christophe Lyon  <christophe.lyon@st.com>
	    Mickaël Guêné <mickael.guene@st.com>

	* config/arm/arm-c.c (__FDPIC__): Define new pre-processor macro
	in FDPIC mode.
	* config/arm/arm-protos.h (arm_load_function_descriptor): Declare
	new function.
	* config/arm/arm.c (arm_option_override): Define pic register to
	FDPIC_REGNUM.
	(arm_function_ok_for_sibcall): Disable sibcall optimization if we
	have no decl or go through PLT.
	(calculate_pic_address_constant): New function.
	(legitimize_pic_address): Call calculate_pic_address_constant.
	(arm_load_pic_register): Handle TARGET_FDPIC.
	(arm_is_segment_info_known): New function.
	(arm_pic_static_addr): Add support for FDPIC.
	(arm_load_function_descriptor): New function.
	(arm_emit_call_insn): Add support for FDPIC.
	(arm_assemble_integer): Add support for FDPIC.
	* config/arm/arm.h (PIC_OFFSET_TABLE_REG_CALL_CLOBBERED):
	Define. (FDPIC_REGNUM): New define.
	* config/arm/arm.md (call): Add support for FDPIC.
	(call_value): Likewise.
	(restore_pic_register_after_call): New pattern.
	(untyped_call): Disable if FDPIC.
	(untyped_return): Likewise.
	* config/arm/unspecs.md (UNSPEC_PIC_RESTORE): New.

2019-09-10  Christophe Lyon  <christophe.lyon@st.com>
	    Mickaël Guêné <mickael.guene@st.com>

	* config.gcc: Handle arm*-*-uclinuxfdpiceabi.
	* config/arm/bpabi.h (TARGET_FDPIC_ASM_SPEC): New.
	(SUBTARGET_EXTRA_ASM_SPEC): Use TARGET_FDPIC_ASM_SPEC.
	* config/arm/linux-eabi.h (FDPIC_CC1_SPEC): New.
	(CC1_SPEC): Use FDPIC_CC1_SPEC.
	(MUSL_DYNAMIC_LINKER): Add -fdpic suffix when needed.
	* config/arm/uclinuxfdpiceabi.h: New file.

2019-09-10  Christophe Lyon  <christophe.lyon@st.com>

	* config.gcc: Handle *-*-uclinuxfdpiceabi.

2019-09-10  Christophe Lyon  <christophe.lyon@st.com>
	    Mickaël Guêné  <mickael.guene@st.com>

	* config/arm/arm.opt: Add -mfdpic option.
	* doc/invoke.texi: Add documentation for -mfdpic.

2019-09-09  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* expmed.c (extract_bit_field): Update function comment
	regarding alt_rtl.
	* expr.c (expand_expr_real): Update function comment
	regarding alt_rtl.
	(expand_misaligned_mem_ref): New helper function.
	(expand_expr_real_2): Use expand_misaligned_mem_ref.
	Remove duplicate assignment to "base" at case MEM_REF.
	Remove a shadowed variable "unsignedp" at case VCE. 

2019-09-09  Richard Sandiford  <richard.sandiford@arm.com>

	* regset.h (regs_invalidated_by_call_regset): Delete.
	(fixed_reg_set_regset): Likewise.
	* reginfo.c (regs_invalidated_by_call_regset): Likewise.
	(fixed_reg_set_regset, persistent_obstack): Likewise.
	(init_reg_sets_1, globalize_reg): Update accordingly.
	* df.h (df_print_regset, df_print_word_regset): Take a const_bitmap
	instead of a bitmap.
	* df-core.c (df_print_regset, df_print_word_regset): Likewise.
	* df-problems.c (df_rd_local_compute): Use regs_invalidated_by_call
	instead of regs_invalidated_by_call_regset.
	(df_lr_confluence_n, df_md_confluence_n): Likewise.
	* df-scan.c (df_scan_start_dump): Likewise.
	* dse.c (copy_fixed_regs): Likewise.
	* config/sh/sh.c (sh_find_equiv_gbr_addr): Likewise.

2019-09-09  Richard Sandiford  <richard.sandiford@arm.com>

	* array-traits.h: New file.
	* coretypes.h (array_traits, bitmap_view): New types.
	* bitmap.h: Include "array-traits.h"
	(bitmap_bit_p): Take a const_bitmap instead of a bitmap.
	(base_bitmap_view, bitmap_view): New classes.
	* bitmap.c (bitmap_bit_p): Take a const_bitmap instead of a bitmap.
	* hard-reg-set.h: Include array-traits.h.
	(array_traits<HARD_REG_SET>): New struct.
	* regset.h (IOR_REG_SET_HRS): New macro.
	* loop-iv.c (simplify_using_initial_values): Use IOR_REG_SET_HRS
	rather than iterating over each hard register.
	* sched-deps.c (sched_analyze_insn): Likewise.
	* sel-sched-ir.c (setup_id_implicit_regs): Likewise.

2019-09-09  Richard Sandiford  <richard.sandiford@arm.com>

	* ira-int.h (ior_hard_reg_conflicts): Take a const_hard_reg_set
	instead of a HARD_REG_SET *.
	* ira-build.c (ior_hard_reg_conflicts): Likewise.
	(ira_build): Update call accordingly.
	* ira-emit.c (add_range_and_copies_from_move_list): Likewise.

2019-09-09  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (HARD_REG_SET::operator==): New function.
	(HARD_REG_SET::operator!=): Likewise.
	(hard_reg_set_equal_p): Delete.
	* cfgcleanup.c (old_insns_match_p): Use == instead of
	hard_reg_set_equal_p and != instead of !hard_reg_set_equal_p.
	* ira-color.c (allocno_hard_regs_hasher::equal): Likewise.
	(add_allocno_hard_regs_to_forest): Likewise.
	(setup_allocno_available_regs_num): Likewise.
	* ira.c (setup_pressure_classes): Likewise.
	(setup_allocno_and_important_classes): Likewise.
	(setup_reg_class_relations): Likewise.
	* lra-lives.c (process_bb_lives): Likewise.
	* reg-stack.c (change_stack, convert_regs_1): Likewise.

2019-09-09  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (IOR_COMPL_HARD_REG_SET): Delete.
	* config/aarch64/cortex-a57-fma-steering.c (rename_single_chain):
	Use "|~" instead of IOR_COMPL_HARD_REG_SET.
	* config/aarch64/falkor-tag-collision-avoidance.c (init_unavailable):
	Likewise.
	* ira-build.c (ira_create_object, ira_set_allocno_class): Likewise.
	* ira.c (setup_reg_renumber): Likewise.
	* lra-assigns.c (find_hard_regno_for_1): Likewise.
	* regrename.c (regrename_find_superclass): Likewise.
	* reload1.c (find_reg): Likewise.

2019-09-09  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (AND_COMPL_HARD_REG_SET): Delete.
	* caller-save.c (setup_save_areas): Use "&~" instead of
	AND_COMPL_HARD_REG_SET.
	(save_call_clobbered_regs): Likewise.
	* config/epiphany/epiphany.c (epiphany_conditional_register_usage):
	Likewise.
	* config/frv/frv.c (frv_ifcvt_modify_tests): Likewise.
	* config/gcn/gcn.c (gcn_md_reorg): Likewise.
	* config/i386/i386.c (ix86_conditional_register_usage): Likewise.
	* config/mips/mips.c (mips_class_max_nregs): Likewise.
	(mips_conditional_register_usage): Likewise.
	* config/sh/sh.c (output_stack_adjust): Likewise.
	* ira-color.c (form_allocno_hard_regs_nodes_forest): Likewise.
	(setup_profitable_hard_regs): Likewise.
	(get_conflict_and_start_profitable_regs): Likewise.
	* ira-conflicts.c (print_allocno_conflicts): Likewise.
	(ira_build_conflicts): Likewise.
	* ira-costs.c (restrict_cost_classes): Likewise.
	(setup_regno_cost_classes_by_aclass): Likewise.
	* ira-lives.c (process_bb_node_lives): Likewise.
	* ira.c (setup_class_hard_regs, setup_reg_subclasses): Likewise.
	(setup_class_subset_and_memory_move_costs, setup_pressure_classes)
	(setup_allocno_and_important_classes, setup_class_translate_array)
	(setup_reg_class_relations, setup_prohibited_class_mode_regs):
	Likewise.
	* lra-assigns.c (find_hard_regno_for_1): Likewise.
	* lra-constraints.c (prohibited_class_reg_set_mode_p): Likewise.
	(process_alt_operands, inherit_in_ebb): Likewise.
	* lra-eliminations.c (update_reg_eliminate): Likewise.
	* lra-lives.c (process_bb_lives): Likewise.
	* reload1.c (update_eliminables_and_spill, reload_as_needed): Likewise.
	* resource.c (find_dead_or_set_registers): Likewise.
	(mark_target_live_regs): Likewise.
	* sched-deps.c (get_implicit_reg_pending_clobbers): Likewise.
	* sel-sched.c (mark_unavailable_hard_regs): Likewise.
	(implicit_clobber_conflict_p): Likewise.
	* shrink-wrap.c (requires_stack_frame_p): Likewise.
	(try_shrink_wrapping): Likewise.

2019-09-09  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (HARD_REG_SET::operator|): New function.
	(HARD_REG_SET::operator|=): Likewise.
	(IOR_HARD_REG_SET): Delete.
	* config/gcn/gcn.c (gcn_md_reorg): Use "|" instead of
	IOR_HARD_REG_SET.
	* config/m32c/m32c.c (m32c_register_move_cost): Likewise.
	* config/s390/s390.c (s390_adjust_loop_scan_osc): Likewise.
	* final.c (collect_fn_hard_reg_usage): Likewise.
	* hw-doloop.c (scan_loop, optimize_loop): Likewise.
	* ira-build.c (merge_hard_reg_conflicts): Likewise.
	(ior_hard_reg_conflicts, create_cap_allocno, propagate_allocno_info)
	(propagate_some_info_from_allocno): Likewise.
	(copy_info_to_removed_store_destinations): Likewise.
	* ira-color.c (add_allocno_hard_regs_to_forest, assign_hard_reg)
	(allocno_reload_assign, ira_reassign_pseudos): Likewise.
	(fast_allocation): Likewise.
	* ira-conflicts.c (ira_build_conflicts): Likewise.
	* ira-lives.c (make_object_dead, process_single_reg_class_operands)
	(process_bb_node_lives): Likewise.
	* ira.c (setup_pressure_classes, setup_reg_class_relations): Likewise.
	* lra-assigns.c (find_hard_regno_for_1): Likewise.
	(setup_live_pseudos_and_spill_after_risky_transforms): Likewise.
	* lra-constraints.c (process_alt_operands, inherit_in_ebb): Likewise.
	* lra-eliminations.c (spill_pseudos, update_reg_eliminate): Likewise.
	* lra-lives.c (mark_pseudo_dead, check_pseudos_live_through_calls)
	(process_bb_lives): Likewise.
	* lra-spills.c (assign_spill_hard_regs): Likewise.
	* postreload.c (reload_combine): Likewise.
	* reginfo.c (init_reg_sets_1): Likewise.
	* regrename.c (merge_overlapping_regs, find_rename_reg)
	(merge_chains): Likewise.
	* reload1.c (maybe_fix_stack_asms, order_regs_for_reload, find_reg)
	(find_reload_regs, finish_spills, choose_reload_regs_init)
	(emit_reload_insns): Likewise.
	* reorg.c (redundant_insn): Likewise.
	* resource.c (find_dead_or_set_registers, mark_set_resources)
	(mark_target_live_regs): Likewise.
	* rtlanal.c (find_all_hard_reg_sets): Likewise.
	* sched-deps.c (sched_analyze_insn): Likewise.
	* sel-sched.c (mark_unavailable_hard_regs): Likewise.
	(find_best_reg_for_expr): Likewise.
	* shrink-wrap.c (try_shrink_wrapping): Likewise.

2019-09-09  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (HARD_REG_SET::operator&): New function.
	(HARD_REG_SET::operator&): Likewise.
	(AND_HARD_REG_SET): Delete.
	* caller-save.c (setup_save_areas): Use "&" instead of
	AND_HARD_REG_SET.
	(save_call_clobbered_regs): Likewise.
	* config/gcn/gcn.c (gcn_md_reorg): Likewise.
	* config/m32c/m32c.c (reduce_class): Likewise.
	* config/rs6000/rs6000.c (rs6000_register_move_cost): Likewise.
	* final.c (get_call_reg_set_usage): Likewise.
	* ira-color.c (add_allocno_hard_regs_to_forest): Likewise.
	(setup_left_conflict_sizes_p): Likewise.
	* ira-conflicts.c (print_allocno_conflicts): Likewise.
	(ira_build_conflicts): Likewise.
	* ira-costs.c (restrict_cost_classes): Likewise.
	* ira.c (setup_stack_reg_pressure_class, setup_class_translate_array)
	(setup_reg_class_relations): Likewise.
	* reginfo.c (init_reg_sets_1, record_subregs_of_mode): Likewise.
	* reload1.c (maybe_fix_stack_asms, finish_spills): Likewise.
	* resource.c (find_dead_or_set_registers): Likewise.
	* sel-sched.c (mark_unavailable_hard_regs): Likewise.

2019-09-09  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (HARD_REG_SET::operator~): New function.
	(COMPL_HARD_REG_SET): Delete.
	* config/c6x/c6x.c (c6x_call_saved_register_used): Use ~ instead
	of COMPL_HARD_REG_SET.
	(try_rename_operands): Likewise.
	* config/sh/sh.c (push_regs): Likewise.
	* lra-assigns.c (find_hard_regno_for_1): Likewise.
	* lra-constraints.c (contains_reg_p): Likewise.
	* reload1.c (finish_spills, choose_reload_regs_init): Likewise.

2019-09-09  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (COPY_HARD_REG_SET): Delete.
	* caller-save.c (save_call_clobbered_regs): Use assignment instead
	of COPY_HARD_REG_SET.
	* config/epiphany/epiphany.c (epiphany_compute_frame_size): Likewise.
	(epiphany_conditional_register_usage): Likewise.
	* config/frv/frv.c (frv_ifcvt_modify_tests): Likewise.
	* config/gcn/gcn.c (gcn_md_reorg): Likewise.
	* config/ia64/ia64.c (ia64_compute_frame_size): Likewise.
	* config/m32c/m32c.c (m32c_register_move_cost): Likewise.
	* config/m68k/m68k.c (m68k_conditional_register_usage): Likewise.
	* config/mips/mips.c (mips_class_max_nregs): Likewise.
	* config/pdp11/pdp11.c (pdp11_conditional_register_usage): Likewise.
	* config/rs6000/rs6000.c (rs6000_register_move_cost): Likewise.
	* config/sh/sh.c (output_stack_adjust): Likewise.
	* final.c (collect_fn_hard_reg_usage): Likewise.
	(get_call_reg_set_usage): Likewise.
	* ira-build.c (ira_create_object, remove_low_level_allocnos)
	(ira_flattening): Likewise.
	* ira-color.c (add_allocno_hard_regs, add_allocno_hard_regs_to_forest)
	(setup_left_conflict_sizes_p, setup_profitable_hard_regs)
	(get_conflict_and_start_profitable_regs, allocno_reload_assign)
	(ira_reassign_pseudos): Likewise.
	* ira-conflicts.c (print_allocno_conflicts): Likewise.
	(ira_build_conflicts): Likewise.
	* ira-costs.c (restrict_cost_classes): Likewise.
	(setup_regno_cost_classes_by_aclass): Likewise.
	* ira.c (setup_class_hard_regs, setup_alloc_regs): Likewise.
	(setup_reg_subclasses, setup_class_subset_and_memory_move_costs)
	(setup_stack_reg_pressure_class, setup_pressure_classes)
	(setup_allocno_and_important_classes, setup_class_translate_array)
	(setup_reg_class_relations, setup_prohibited_class_mode_regs)
	(ira_setup_eliminable_regset): Likewise.
	* lra-assigns.c (find_hard_regno_for_1): Likewise.
	(setup_live_pseudos_and_spill_after_risky_transforms): Likewise.
	* lra-constraints.c (prohibited_class_reg_set_mode_p): Likewise.
	(process_alt_operands, inherit_in_ebb): Likewise.
	* lra-lives.c (process_bb_lives): Likewise.
	* lra-spills.c (assign_spill_hard_regs): Likewise.
	* lra.c (lra): Likewise.
	* mode-switching.c (new_seginfo): Likewise.
	* postreload.c (reload_combine): Likewise.
	* reg-stack.c (straighten_stack): Likewise.
	* reginfo.c (save_register_info, restore_register_info): Likewise.
	(init_reg_sets_1, record_subregs_of_mode): Likewise
	* regrename.c (create_new_chain, rename_chains): Likewise.
	* reload1.c (order_regs_for_reload, find_reg): Likewise.
	(find_reload_regs): Likewise.
	* resource.c (find_dead_or_set_registers): Likewise.
	(mark_target_live_regs): Likewise.
	* sel-sched.c (mark_unavailable_hard_regs): Likewise.

2019-09-09  Richard Sandiford  <richard.sandiford@arm.com>

	* rtl.h (CALL_INSN_FUNCTION_USAGE): Document what SETs mean.
	(note_pattern_stores): Declare.
	(note_stores): Take an rtx_insn *.
	* rtlanal.c (set_of): Use note_pattern_stores instead of note_stores.
	(find_all_hard_reg_sets): Pass the insn rather than its pattern to
	note_stores.  Remove explicit handling of CALL_INSN_FUNCTION_USAGE.
	(note_stores): Take an rtx_insn * as argument and process
	CALL_INSN_FUNCTION_USAGE.  Rename old function to...
	(note_pattern_stores): ...this.
	(find_first_parameter_load): Pass the insn rather than
	its pattern to note_stores.
	* alias.c (memory_modified_in_insn_p, init_alias_analysis): Likewise.
	* caller-save.c (setup_save_areas, save_call_clobbered_regs)
	(insert_one_insn): Likewise.
	* combine.c (combine_instructions): Likewise.
	(likely_spilled_retval_p): Likewise.
	(try_combine): Use note_pattern_stores instead of note_stores.
	(record_dead_and_set_regs): Pass the insn rather than its pattern
	to note_stores.
	(reg_dead_at_p): Likewise.
	* config/bfin/bfin.c (workaround_speculation): Likewise.
	* config/c6x/c6x.c (maybe_clobber_cond): Likewise.  Take an rtx_insn *
	rather than an rtx.
	* config/frv/frv.c (frv_registers_update): Use note_pattern_stores
	instead of note_stores.
	(frv_optimize_membar_local): Pass the insn rather than its pattern
	to note_stores.
	* config/gcn/gcn.c (gcn_md_reorg): Likewise.
	* config/i386/i386.c (ix86_avx_u128_mode_after): Likewise.
	* config/mips/mips.c (vr4130_true_reg_dependence_p): Likewise.
	(r10k_needs_protection_p, mips_sim_issue_insn): Likewise.
	(mips_reorg_process_insns): Likewise.
	* config/s390/s390.c (s390_regs_ever_clobbered): Likewise.
	* config/sh/sh.c (flow_dependent_p): Likewise.  Take rtx_insn *s
	rather than rtxes.
	* cse.c (delete_trivially_dead_insns): Pass the insn rather than
	its pattern to note_stores.
	* cselib.c (cselib_record_sets): Use note_pattern_stores instead
	of note_stores.
	* dce.c (mark_nonreg_stores): Remove the "body" parameter and pass
	the insn to note_stores.
	(prescan_insns_for_dce): Update call accordingly.
	* ddg.c (mem_write_insn_p): Pass the insn rather than its pattern
	to note_stores.
	* df-problems.c (can_move_insns_across): Likewise.
	* dse.c (emit_inc_dec_insn_before, replace_read): Likewise.
	* function.c (assign_parm_setup_reg): Likewise.
	* gcse-common.c (record_last_mem_set_info_common): Likewise.
	* gcse.c (load_killed_in_block_p, compute_hash_table_work): Likewise.
	(single_set_gcse): Likewise.
	* ira.c (validate_equiv_mem): Likewise.
	(update_equiv_regs): Use note_pattern_stores rather than note_stores
	for no_equiv.
	* loop-doloop.c (doloop_optimize): Pass the insn rather than its
	pattern to note_stores.
	* loop-invariant.c (calculate_loop_reg_pressure): Likewise.
	* loop-iv.c (simplify_using_initial_values): Likewise.
	* mode-switching.c (optimize_mode_switching): Likewise.
	* optabs.c (emit_libcall_block_1): Likewise.
	(expand_atomic_compare_and_swap): Likewise.
	* postreload-gcse.c (load_killed_in_block_p): Likewise.
	(record_opr_changes): Likewise.  Remove explicit handling of
	CALL_INSN_FUNCTION_USAGE.
	* postreload.c (reload_combine, reload_cse_move2add): Likewise.
	* regcprop.c (kill_clobbered_values): Likewise.
	(copyprop_hardreg_forward_1): Pass the insn rather than its pattern
	to note_stores.
	* regrename.c (build_def_use): Likewise.
	* reload1.c (reload):  Use note_pattern_stores instead of note_stores
	for mark_not_eliminable.
	(reload_as_needed): Pass the insn rather than its pattern
	to note_stores.
	(emit_output_reload_insns): Likewise.
	* resource.c (mark_target_live_regs): Likewise.
	* sched-deps.c (init_insn_reg_pressure_info): Likewise.
	* sched-rgn.c (sets_likely_spilled): Use note_pattern_stores
	instead of note_stores.
	* shrink-wrap.c (try_shrink_wrapping): Pass the insn rather than
	its pattern to note_stores.
	* stack-ptr-mod.c (pass_stack_ptr_mod::execute): Likewise.
	* var-tracking.c (adjust_insn, add_with_sets): Likewise.

2019-09-09  Richard Sandiford  <richard.sandiford@arm.com>

	* hard-reg-set.h (HARD_REG_SET): Define using a typedef rather
	than a #define.  Use a structure rather than an array as the
	fallback definition.  Remove special cases for low array sizes.
	(const_hard_reg_set): New typedef.
	(hard_reg_set_subset_p): Use it instead of "const HARD_REG_SET".
	(hard_reg_set_equal_p, hard_reg_set_intersect_p): Likewise.
	(hard_reg_set_empty_p): Likewise.
	(SET_HARD_REG_BIT): Use a function rather than a macro to
	handle the case in which HARD_REG_SET is a structure.
	(CLEAR_HARD_REG_BIT, TEST_HARD_REG_BIT, CLEAR_HARD_REG_SET)
	(SET_HARD_REG_SET, COPY_HARD_REG_SET, COMPL_HARD_REG_SET)
	(AND_HARD_REG_SET, AND_COMPL_HARD_REG_SET, IOR_HARD_REG_SET)
	(IOR_COMPL_HARD_REG_SET): Likewise.
	(hard_reg_set_iterator::pset): Constify the pointer target.
	(hard_reg_set_iter_init): Take a const_hard_reg_set instead
	of a "const HARD_REG_SET".  Update the handling of non-integer
	HARD_REG_SETs.
	* recog.h: Test HARD_CONST instead of CLEAR_HARD_REG_SET.
	* reload.h: Likewise.
	* rtl.h (choose_hard_reg_mode): Remove unnecessary line break.
	* regs.h (in_hard_reg_set_p): Take a const_hard_reg_set instead
	of a "const HARD_REG_SET".
	(overlaps_hard_reg_set_p, range_overlaps_hard_reg_set_p): Likewise.
	(range_in_hard_reg_set_p): Likewise.
	* ira-costs.c (restrict_cost_classes): Likewise.
	* shrink-wrap.c (move_insn_for_shrink_wrap): Likewise.
	* config/epiphany/resolve-sw-modes.c (pass_resolve_sw_modes::execute):
	Pass a NO_REGS HARD_REG_SET rather than NULL to emit_set_fp_mode.
	* config/ia64/ia64.c (rws_insn): In the CHECKING_P version,
	use unsigned HOST_WIDEST_FAST_INT rather than HARD_REG_ELT_TYPE.
	(rws_insn_set, rws_insn_test): In the CHECKING_P version,
	take an unsigned int and open-code the HARD_REG_SET operations.

2019-09-09  Richard Sandiford  <richard.sandiford@arm.com>

	* Makefile.in (OBJS): Remove bt-load.o.
	* doc/invoke.texi (fbranch-target-load-optimize): Delete.
	(fbranch-target-load-optimize2, fbtr-bb-exclusive): Likewise.
	* common.opt (fbranch-target-load-optimize): Mark as Ignore and
	document that the option no longer does anything.
	(fbranch-target-load-optimize2, fbtr-bb-exclusive): Likewise.
	* target.def (branch_target_register_class): Delete.
	(branch_target_register_callee_saved): Likewise.
	* doc/tm.texi.in (TARGET_BRANCH_TARGET_REGISTER_CLASS): Likewise.
	(TARGET_BRANCH_TARGET_REGISTER_CALLEE_SAVED): Likewise.
	* doc/tm.texi: Regenerate.
	* tree-pass.h (make_pass_branch_target_load_optimize1): Delete.
	(make_pass_branch_target_load_optimize2): Likewise.
	* passes.def (pass_branch_target_load_optimize1): Likewise.
	(pass_branch_target_load_optimize2): Likewise.
	* targhooks.h (default_branch_target_register_class): Likewise.
	* targhooks.c (default_branch_target_register_class): Likewise.
	* opt-suggestions.c (test_completion_valid_options): Remove
	-fbtr-bb-exclusive from the list of test options.
	* bt-load.c: Remove.

2019-09-09  Barnaby Wilks  <barnaby.wilks@arm.com>

	* match.pd: Add flag_unsafe_math_optimizations check
	before deciding on the widest type in a binary math operation.

2019-09-09  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.opt: Update comment of removed
	options that are preserved only for backward
	compatibility.

2019-09-09  Jakub Jelinek  <jakub@redhat.com>

	PR target/87853
	* config/i386/emmintrin.h (_mm_cmpeq_epi8): Use casts to __v16qi
	instead of __v16qs.

	PR target/91704
	* config/i386/avxintrin.h (__v32qs): New typedef.
	* config/i386/avx2intrin.h (_mm256_cmpgt_epi8): Use casts to __v32qs
	instead of __v32qi.

2019-09-09  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* doc/invoke.texi (Option Summary): Cover eBPF.
	(eBPF Options): New section.
	* doc/extend.texi (BPF Built-in Functions): Likewise.
	(BPF Kernel Helpers): Likewise.

2019-09-09  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* config.gcc: Support for bpf-*-* targets.
	* common/config/bpf/bpf-common.c: New file.
	* config/bpf/t-bpf: Likewise.
	* config/bpf/predicates.md: Likewise.
	* config/bpf/constraints.md: Likewise.
	* config/bpf/bpf.opt: Likewise.
	* config/bpf/bpf.md: Likewise.
	* config/bpf/bpf.h: Likewise.
	* config/bpf/bpf.c: Likewise.
	* config/bpf/bpf-protos.h: Likewise.
	* config/bpf/bpf-opts.h: Likewise.
	* config/bpf/bpf-helpers.h: Likewise.
	* config/bpf/bpf-helpers.def: Likewise.

2019-09-09  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* doc/sourcebuild.texi (Effective-Target Keywords): Document
	indirect_calls.

2019-09-09  Jose E. Marchesi  <jose.marchesi@oracle.com>

	* opt-functions.awk (integer_range_info): Make sure values are in
	numeric context before operating with them.

2019-09-08  Segher Boessenkool  <segher@kernel.crashing.org>

	* genemit.c (gen_split): Print the filename and line number where the
	splitter (or peephole2) was defined, to the dump file.

2019-09-07  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91665
	* tree-vect-loop.c (vectorizable_reduction): Punt if base has type
	incompatible with the type of PHI result.

2019-09-07  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR target/91684
	* config/arm/arm.c (arm_block_set_aligned_non_vect): Use
	gen_unaligned_storedi for 4-byte aligned addresses.

2019-09-06  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (riscv_option_override): Revert 2019-08-30
	change.

2019-09-06  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (unspec): Delete UNSPEC_MV_CR_OV.

2019-09-06  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_rtx_costs) <case UNSPEC>: Delete.
	* config/rs6000/rs6000.md (unspec): Delete UNSPEC_FRSP.

2019-09-06  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91654
	* config/i386/x86-tune-costs.h (skylake_cost): Raise the
	cost of SSE->integer and integer->SSE moves from 2 to 6.
	(core_cost): Ditto.

2019-09-06  Jakub Jelinek  <jakub@redhat.com>

	* function.c (assign_parm_find_data_types): Use RECORD_OR_UNION_TYPE_P
	before testing TYPE_TRANSPARENT_AGGR.
	* calls.c (initialize_argument_information, load_register_parameters):
	Likewise.

2019-09-06  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (cmp_and): Add short-it variant for thumb2 with
	high regs.
	(cmp_ior): Likewise.

2019-09-06  Martin Liska  <mliska@suse.cz>

	* doc/match-and-simplify.texi: Separate tuples with ;.

2019-09-06  Martin Liska  <mliska@suse.cz>

	PR c++/91125
	* Makefile.in: Remove tlink.o.
	* collect2.c (do_link): New function isolated
	from do_tlink.
	(main): Use.
	* collect2.h (do_tlink): Remove declaration of do_tlink.
	* doc/extend.texi: Remove documentation of -frepo.
	* doc/invoke.texi: Likewise.
	* doc/sourcebuild.texi: Remove cleanup-repo-files.
	* tlink.c: Remove.

2019-09-05  Jakub Jelinek  <jakub@redhat.com>
	    Jim Wilson  <jimw@sifive.com>

	PR target/91635
	* config/riscv/riscv.md (zero_extendsidi2, zero_extendhi<GPR:mode>2,
	extend<SHORT:mode><SUPERQI:mode>2): Don't split if
	paradoxical_subreg_p (operands[0]).
	(*lshrsi3_zero_extend_3+1, *lshrsi3_zero_extend_3+2): Add clobber and
	use as intermediate value.

2019-09-05  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.md (*movti_insn): Set delayeduse for global_store.
	(sync_compare_and_swap<mode>_insn): Likewise.

2019-09-05  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR middle-end/91615
	* expr.c (expand_expr_real_1): Handle misaligned TARGET_MEM_REF
	without movmisalign optab.

2019-09-05  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/91001
	PR middle-end/91105
	PR middle-end/91106
	* calls.c (load_register_parameters): For TYPE_TRANSPARENT_AGGR
	types, use type of their first field instead of type of
	args[i].tree_value.

2019-09-05  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/91656
	* postreload-gcse.c (record_last_mem_set_info): Revert addition
	of early out.

2019-09-05  Richard Biener  <rguenther@suse.de>

	PR middle-end/90501
	* tree-inline.c (declare_return_variable): Mark the return
	slot as addressable after building an address of it.

2019-09-05  Arnaud Charlet  <charlet@adacore.com>

	* doc/install.texi: Update and clarify requirements to build GNAT.

2019-09-05  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/91577
	* cfgexpand.c (discover_nonconstant_array_refs): Force the source
	of an IFN_LOAD_LANES call and the destination of an IFN_STORE_LANES
	call to be in memory.
	(pass_expand::execute): Call discover_nonconstant_array_refs before
	setting currently_expanding_to_rtl.

2019-09-04  Caroline Tice  <cmtice@google.com>

	* opts.c (finish_options): Disallow -fvtable-verify and -flto to be
	specified together.

2019-09-04  Marek Polacek  <polacek@redhat.com>

	* doc/invoke.texi: Remove -fdeduce-init-list documentation.

2019-09-04  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/32413
	* config/i386/i386.c (inline_secondary_memory_needed): Return true
	for QI and HImode moves between SSE and general registers.

2019-09-04  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR c/78736
	* doc/invoke.texi: Document -Wenum-conversion.

2019-09-04  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/36262
	* postreload-gcse.c: Include intl.h and gcse.h.
	(insert_expr_in_table): Insert at the head of cur_expr->avail_occr
	to avoid linear list walk.
	(record_last_mem_set_info): Gate off if not computing transparentness.
	(get_bb_avail_insn): If transparentness isn't computed give up
	early.
	(gcse_after_reload_main): Skip compute_transp and extended PRE
	if gcse_or_cprop_is_too_expensive says so.

2019-09-03  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_init_sections): Remove handling of the
	noinit section.
	(msp430_select_section): Handle decls with the "noinit" attribute with
	default_elf_select_section.
	Handle SECCAT_RODATA_MERGE_* section types with
	default_elf_select_section.
	Add comments about handling of unsupported section types.
	(msp430_section_type_flags): Remove handling of the noinit section.

2019-09-03  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_attr): Remove warnings about
	conflicting msp430-specific attributes.
	(msp430_section_attr): Likewise.
	Add warnings about conflicts with generic "noinit" and "section"
	attributes.
	Fix grammar in -mlarge error message.
	(msp430_data_attr): Rename to msp430_persist_attr.
	Add warnings about conflicts with generic "noinit" and "section"
	attributes.
	Add warning for when variable is not initialized.
	Chain conditionals which prevent the attribute being added.
	(ATTR_EXCL): New helper.
	(attr_reent_exclusions): New exclusion table.
	(attr_naked_exclusions): Likewise.
	(attr_crit_exclusions): Likewise.
	(attr_lower_exclusions): Likewise.
	(attr_upper_exclusions): Likewise.
	(attr_either_exclusions): Likewise.
	(attr_persist_exclusions): Likewise.
	(msp430_attribute_table): Update with exclusion rules.
	(msp430_output_aligned_decl_common): Don't output common symbol if decl
	has a section.

2019-09-03  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (TARGET_HANDLE_GENERIC_ATTRIBUTE): Define.
	(msp430_handle_generic_attribute): New function.
	* doc/tm.texi: Regenerate.
	* doc/tm.texi.in: Add TARGET_HANDLE_GENERIC_ATTRIBUTE.
	* hooks.c (hook_tree_treeptr_tree_tree_int_boolptr_null): New.
	* hooks.h (hook_tree_treeptr_tree_tree_int_boolptr_null): New.
	* target.def: Define new hook TARGET_HANDLE_GENERIC_ATTRIBUTE.

2019-09-03  Kamlesh Kumar  <kamleshbhalui@gmail.com>

	PR tree-optimization/91504
	* match.pd: Add ((~a & b) ^a) --> (a | b).

2019-09-03  Jakub Jelinek  <jakub@redhat.com>

	PR target/91604
	* config/i386/i386-expand.c (split_double_mode): If there is more than
	one MEM operand and they are rtx_equal_p, reuse lo_half/hi_half from
	already split matching MEM operand instead of calling adjust_address
	again.

2019-09-03  Ulrich Weigand  <uweigand@de.ibm.com>

	* config.gcc: Obsolete spu target.  Remove references to spu.
	* configure.ac: Remove references to spu.
	* configure: Regenerate.
	* config/spu/: Remove directory.
	* common/config/spu/: Remove directory.

	* doc/extend.texi: Remove references to spu.
	* doc/invoke.texi: Likewise.
	* doc/md.texi: Likewise.
	* doc/sourcebuild.texi: Likewise.

2019-09-03  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR middle-end/91603
	PR middle-end/91612
	PR middle-end/91613
	* expr.c (expand_expr_real_1): Handle unaligned decl_rtl
	and SSA_NAME referring to CONSTANT_P correctly.

2019-09-03  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.h (vn_nary_op_lookup): Remove.
	(vn_nary_op_insert): Likewise.
	* tree-ssa-sccvn.c (init_vn_nary_op_from_op): Remove.
	(vn_nary_op_lookup): Likewise.
	(vn_nary_op_insert): Likewise.

2019-09-03  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/s390.c (s390_canonicalize_comparison): Use XEXP
	(*op0, 1) instead of XEXP (*op1, 0).

2019-09-03  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.md (UNSPEC_FJCVTZS): Define.
	(aarch64_fjcvtzs): New define_insn.
	* config/aarch64/aarch64.h (TARGET_JSCVT): Define.
	* config/aarch64/aarch64-builtins.c (aarch64_builtins):
	Add AARCH64_JSCVT.
	(aarch64_init_builtins): Initialize __builtin_aarch64_jcvtzs.
	(aarch64_expand_builtin): Handle AARCH64_JSCVT.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Define
	__ARM_FEATURE_JCVT where appropriate.
	* config/aarch64/arm_acle.h (__jcvt): Define.

2019-09-03  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.md ("unspec"): Add UNSPEC_FRINT32Z,
	UNSPEC_FRINT32X, UNSPEC_FRINT64Z, UNSPEC_FRINT64X.
	(aarch64_<frintnzs_op><mode>): New define_insn.
	* config/aarch64/aarch64.h (TARGET_FRINT): Define.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Define
	__ARM_FEATURE_FRINT when appropriate.
	* config/aarch64/aarch64-simd-builtins.def: Add builtins for frint32z,
	frint32x, frint64z, frint64x.
	* config/aarch64/arm_acle.h (__rint32zf, __rint32z, __rint64zf,
	__rint64z, __rint32xf, __rint32x, __rint64xf, __rint64x): Define.
	* config/aarch64/arm_neon.h (vrnd32z_f32, vrnd32zq_f32, vrnd32z_f64,
	vrnd32zq_f64, vrnd32x_f32, vrnd32xq_f32, vrnd32x_f64, vrnd32xq_f64,
	vrnd64z_f32, vrnd64zq_f32, vrnd64z_f64, vrnd64zq_f64, vrnd64x_f32,
	vrnd64xq_f32, vrnd64x_f64, vrnd64xq_f64): Define.
	* config/aarch64/iterators.md (VSFDF): Define.
	(FRINTNZX): Likewise.
	(frintnzs_op): Likewise.

2019-09-03  Dennis Zhang  <dennis.zhang@arm.com>

	* config/aarch64/aarch64-cores.def (AARCH64_CORE): New entries
	for Cortex-A77, Cortex-A76AE, Cortex-A65, Cortex-A65AE, and
	Cortex-A34.
	* config/aarch64/aarch64-tune.md: Regenerated.
	* doc/invoke.texi: Document the new processors.

2019-09-03  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-option-extensions.def (sb): Add feature
	string.
	(ssbs): Likewise.
	(sve2): Likewise.
	(sve2-sm4): Likewise.
	(sveaes): Likewise.
	(svesha3): Likewise.
	(svebitperm): Likewise.

2019-09-03  Jakub Jelinek  <jakub@redhat.com>
	    Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91597
	* tree-vrp.c (extract_range_from_binary_expr): Remove unsafe
	BIT_AND_EXPR optimization for pointers, even if both operand
	ranges don't include NULL, the result can be NULL.

2019-09-02  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR middle-end/91605
	* expr.c (addr_expr_of_non_mem_decl_p_1): Refactor into...
	(non_mem_decl_p): ...this.
	(mem_ref_refers_to_non_mem_p): Handle DECL_P as well as MEM_REF.
	(expand_assignment): Call mem_ref_referes_to_non_mem_p
	unconditionally as before.

2019-09-02  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/91323
	* doc/generic.texi (LTGT_EXPR): Merge with other comparison operators.
	* rtl.def (LTGT): Likewise.  Add note about floating-point exceptions.
	* tree.def (LTGT_EXPR): Likewise.
	* config/sparc/sparc.c (select_cc_mode): Return CCFPEmode for LTGT.

2019-09-02  Jakub Jelinek  <jakub@redhat.com>

	PR go/91617
	* fold-const.c (range_check_type): For enumeral and boolean
	type, pass 1 to type_for_size langhook instead of
	TYPE_UNSIGNED (etype).  Return unsigned_type_for result whenever
	etype isn't TYPE_UNSIGNED INTEGER_TYPE.
	(build_range_check): Don't call unsigned_type_for for pointer types.
	* match.pd (X / C1 op C2): Don't call unsigned_type_for on
	range_check_type result.

2019-09-02  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple-ssa-strength-reduction.c (valid_mem_ref_cand_p): New function.
	(replace_ref): Do not replace a chain of only two candidates which are
	valid memory references.

2019-09-02  Martin Liska  <mliska@suse.cz>

	* tree-switch-conversion.c (jump_table_cluster::find_jump_tables):
	Bail out when we'll end up with the same number of clusters as
	at the beginning.
	(bit_test_cluster::find_bit_tests): Likewise for bit tests.
	(jump_table_cluster::can_be_handled): Remove the guard
	as it's already handled in ::is_enabled.  Allocate output
	after early bail out.

2019-09-02  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/91601
	* gcov.c (path_contains_zero_cycle_arc): Rename to ...
	(path_contains_zero_or_negative_cycle_arc): ... this and handle
	also negative edges.
	(circuit): Handle also negative edges as they can happen
	in some situations.

2019-09-01  Eric Botcazou  <ebotcazou@adacore.com>

	PR target/91472
	* config/sparc/sparc.c (sparc_cannot_force_const_mem): Return true
	during LRA/reload in PIC mode if the PIC register hasn't been used yet.
	(sparc_pic_register_p): Test reload_in_progress for consistency's sake.

2019-09-01  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/91623
	* optabs.c (expand_vec_cond_expr): If op0 is a VECTOR_CST and only
	EQ_EXPR/NE_EXPR is supported, verify that op0 only contains
	zeros or negative elements and use NE_EXPR instead of LT_EXPR against
	zero vector.

	PR lto/91572
	* tree.c (find_decls_types_in_node): Also walk TREE_PURPOSE of
	GIMPLE_ASM TREE_LIST operands.

2019-08-31  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/generic.texi (Unary and Binary Expressions): Mark up
	an instance of TYPE_MIN.

2019-08-31  Stafford Horne  <shorne@gmail.com>

	* config/or1k/constraints.md (t): New constraint.
	* config/or1k/or1k.h (GOT_REGS): New register class.
	* config/or1k/or1k.md (set_got_tmp, set_got): Use t contraint.

2019-08-30  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.c (riscv_option_override): If -msave-restore
	and -fpic and -mplt then disable -msave-restore and warn.

2019-08-30  Martin Sebor  <msebor@redhat.com>

	PR middle-end/91599
	* tree-ssa-strlen.c (handle_store): Use a fallback location if
	the statement doesn't have one.
	* gimple-pretty-print.c (percent_G_format): Same.

	PR middle-end/91584
	* tree-vrp.c (vrp_prop::check_mem_ref): Normalize type domain bounds
	before using them to validate MEM_REF offset.

2019-08-30  Marek Polacek  <polacek@redhat.com>

	* doc/invoke.texi (-Wvolatile): Use @code for volatile.

2019-08-30  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* config/arm/arm.md (unaligned_loaddi,
	unaligned_storedi): New unspec insn patterns.
	* config/arm/neon.md (unaligned_storev8qi): Likewise.
	* config/arm/arm.c (gen_cpymem_ldrd_strd): Use unaligned_loaddi
	and unaligned_storedi for 4-byte aligned memory.
	(arm_block_set_aligned_vect): Use unaligned_storev8qi for
	4-byte aligned memory.

2019-08-30  Martin Jambor  <mjambor@suse.cz>

	tree-optimization/91579
	* tree-tailcall.c (tailr_arg_needs_copy): New variable.
	(find_tail_calls): Allocate tailr_arg_needs_copy and set its bits as
	appropriate.
	(arg_needs_copy_p): Removed.
	(eliminate_tail_call): Test tailr_arg_needs_copy instead of calling
	arg_needs_copy_p.
	(tree_optimize_tail_calls_1): Likewise.  Free tailr_arg_needs_copy.

2019-08-29  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-features.c
	(general_scalar_chain::compute_convert_gain):
	Correct cost for double-word shifts.
	(general_scalar_to_vector_candidate_p): Reject count operands
	greater or equal to mode bitsize.

2019-08-29  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (inline_secondary_memory_needed): Return true
	for moves between SSE and non-general registers and between
	mask and non-general registers.
	(ix86_register_move_cost): Remove stalled comment.

2019-08-29  Richard Biener  <rguenther@suse.de>

	* config/i386/i386-features.c (general_scalar_chain::convert_insn):
	Guard debug work with MAY_HAVE_DEBUG_BIND_INSNS.

2019-08-29  Richard Biener  <rguenther@suse.de>

	PR bootstrap/91580
	* config/i386/i386-features.c (general_scalar_chain::convert_insn):
	Do not emit scalar copies for debug-insns, instead replace
	their uses with the reg copy used in the chain or reset them
	if there is a reaching definition outside of the chain as well.

2019-08-29  Jakub Jelinek  <jakub@redhat.com>

	PR target/91560
	* config/i386/i386-expand.c (expand_vec_perm_movs,
	expand_vec_perm_blend, expand_vec_perm_vpermil,
	expand_vec_perm_pshufb, expand_vec_perm_1,
	expand_vec_perm_pshuflw_pshufhw, expand_vec_perm_palignr,
	expand_vec_perm_interleave2, expand_vec_perm_vpermq_perm_1,
	expand_vec_perm_vperm2f128, expand_vec_perm_interleave3,
	expand_vec_perm_vperm2f128_vblend, expand_vec_perm_2vperm2f128_vshuf,
	expand_vec_perm_even_odd, expand_vec_perm_broadcast): Adjust function
	comments - replace ix86_expand_vec_perm_builtin_1 with
	ix86_expand_vec_perm_const_1.
	(expand_vec_perm2_vperm2f128_vblend): New function.
	(ix86_expand_vec_perm_const_1): New forward declaration.  Call
	expand_vec_perm2_vperm2f128_vblend as last resort.
	(canonicalize_perm): Formatting fix.

	PR tree-optimization/91351
	* tree-cfg.c (generate_range_test): Use range_check_type instead of
	unsigned_type_for.
	* tree-cfgcleanup.c (convert_single_case_switch): Punt if
	range_check_type returns NULL.
	* tree-switch-conversion.c (switch_conversion::build_one_array):
	Use range_check_type instead of unsigned_type_for, don't perform
	linear opt if it returns NULL.
	(bit_test_cluster::find_bit_tests): Formatting fix.
	(bit_test_cluster::emit): Use range_check_type instead of
	unsigned_type_for.
	(switch_decision_tree::try_switch_expansion): Punt if range_check_type
	returns NULL.

2019-08-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91568
	* tree-vectorizer.h (_slp_tree::max_nunits): Add.
	(vect_update_max_nunits): Add overload for poly_uint64.
	* tree-vect-slp.c (vect_create_new_slp_node): Initialize it.
	(vect_build_slp_tree): Record max_nunits into the subtree
	and merge it upwards.
	(vect_print_slp_tree): Print max_nunits.

2019-08-28  Marek Polacek  <polacek@redhat.com>

	Implement P1152R4: Deprecating some uses of volatile.
	PR c++/91361
	* doc/invoke.texi: Document -Wvolatile.

2019-08-28  Marek Polacek  <polacek@redhat.com>

	PR c++/91360 - Implement C++20 P1143R2: constinit.
	* doc/invoke.texi: Document -Wc++20-compat.

2019-08-28  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/91457
	* builtins.c (component_size): New function.
	(compute_objsize): Add argument. Handle ARRAY_REF and COMPONENT_REF.
	* builtins.h (compute_objsize): Add argument.
	* tree-ssa-strlen.c (handle_store): Handle no-warning bit.
	* tree-vrp.c (vrp_prop::check_array_ref): Return warning result.
	(vrp_prop::check_mem_ref): Same.
	(vrp_prop::search_for_addr_array): Set no-warning bit.
	(check_array_bounds): Same.

2019-08-28  Martin Sebor  <msebor@redhat.com>

	PR driver/80545
	* opts-common.c (option_enabled): Correct checking for language
	options.

2019-08-28  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (ix86_register_move_cost): Do not
	limit the cost of moves to/from XMM register to minimum 8.

2019-08-28  Martin Jambor  <mjambor@suse.cz>

	PR ipa/91468
	* ipa-cp.c (merge_agg_lats_step): Removed redundant test, made a
	checking assert a normal assert to test it really is redundant.
	* ipa-prop.c (compute_complex_assign_jump_func): Removed
	redundant test.
	(update_jump_functions_after_inlining): Removed combining unary
	arithmetic operations with an ancestor jump function.
	(ipcp_modif_dom_walker::before_dom_children): Fix wrong use of rhs
	instead of t.

2019-08-28  Richard Biener  <rguenther@suse.de>

	* config/i386/i386-features.c (convert_scalars_to_vector): Do not
	add the MD problem.

2019-08-28  Bernd Edlinger  <bernd.edlinger@hotmail.de>
	    Richard Biener  <rguenther@suse.de>

	* expr.c (expand_assignment): Handle misaligned DECLs.
	(expand_expr_real_1): Handle FUNCTION_DECL as unaligned.
	* function.c (assign_parm_adjust_stack_rtl): Check movmisalign optab
	too.
	(assign_parm_setup_stack): Allocate properly aligned stack slots.
	* varasm.c (build_constant_desc): Align constants of misaligned types.
	* config/arm/predicates.md (aligned_operand): New predicate.
	* config/arm/arm.md (movdi, movsi, movhi, movhf, movsf, movdf): Use
	aligned_operand to check restrictions on memory addresses.
	* config/arm/neon.md (movti, mov<VSTRUCT>, mov<VH>): Likewise.
	* config/arm/vec-common.md (mov<VALL>): Likewise.

2019-08-28  Jakub Jelinek  <jakub@redhat.com>

	PR libgomp/91530
	* config/i386/sse.md (vec_shl_<mode>, vec_shr_<mode>): Use
	V_128 iterator instead of VI_128.

2019-08-28  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90970
	* builtins.c (check_access): Remove assignment to maxread
	as it hasn't been used since when it was introduced in r255755.

2019-08-27  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/91567
	* gimple-ssa-sprintf.c (get_string_length): Handle more forms of lengths
	of unknown strings.
	* vr-values.c (vr_values::extract_range_basic): Set strlen upper bound
	to PTRDIFF_MAX - 2.

2019-08-27  Jeff Law  <law@redhat.com>

	* tree-ssa-strlen.c (printf_strlen_execute): Initialize
	the loop optimizer and SCEV before sizing ssa_ver_to_stridx.

2019-08-27  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91528
	* config/i386/i386-features.c (convert_scalars_to_vector):
	Update crtl->stack_realign_needed, crtl->stack_realign_tried and
	crtl->stack_realign_processed.  Update crtl->drap_reg by calling
	targetm.calls.get_drap_rtx.  If drap_rtx is non-null then
	Update crtl->args.internal_arg_pointer and call fixup_tail_calls.

2019-08-27  Richard Biener  <rguenther@suse.de>

	* config/i386/i386-features.h
	(general_scalar_chain::~general_scalar_chain): Add.
	(general_scalar_chain::insns_conv): New bitmap.
	(general_scalar_chain::n_sse_to_integer): New.
	(general_scalar_chain::n_integer_to_sse): Likewise.
	(general_scalar_chain::make_vector_copies): Adjust signature.
	* config/i386/i386-features.c
	(general_scalar_chain::general_scalar_chain): Outline,
	initialize new members.
	(general_scalar_chain::~general_scalar_chain): New.
	(general_scalar_chain::mark_dual_mode_def): Record insns
	we need to insert conversions at and count them.
	(general_scalar_chain::compute_convert_gain): Account
	for conversion instructions at chain boundary.
	(general_scalar_chain::make_vector_copies): Generate a single
	copy for a def by a specific insn.
	(general_scalar_chain::convert_registers): First populate
	defs_map, then make copies at out-of chain insns.

2019-08-27  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (stack_protect_set_insn): Add security-related
	comment.
	* config/aarch64/aarch64.md (stack_protect_set_<mode>): Likewise.

2019-08-27  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::remove): Remove dead assignment before
	loop.
	* config/i386/i386-features.c (scalar_chain::emit_conversion_insns):
	Enclose in anonymous namespace.
	* config/i386/x86-tune-costs.h (struct processor_costs): Wrap
	hard_register initialization in braces.
	* tree-vrp.h (value_range_base::supports_type_p): Return false
	for function with boolean return type.

2019-08-26  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (emit_i387_cw_initialization)
	<case I387_CW_ROUNDEVEN>: Fix masking operand value.

2019-08-26  Martin Sebor  <msebor@redhat.com>

	PR c++/83431
	* gimple-ssa-sprintf.c (pass_data_sprintf_length): Remove object.
	(sprintf_dom_walker): Remove class.
	(get_int_range): Make argument const.
	(directive::fmtfunc, directive::set_precision): Same.
	(format_none): Same.
	(build_intmax_type_nodes): Same.
	(adjust_range_for_overflow): Same.
	(format_floating): Same.
	(format_character): Same.
	(format_string): Same.
	(format_plain): Same.
	(get_int_range): Cast away constness.
	(format_integer): Same.
	(get_string_length): Call get_range_strlen_dynamic.  Handle
	null lendata.maxbound.
	(should_warn_p): Adjust argument scope qualifier.
	(maybe_warn): Same.
	(format_directive): Same.
	(parse_directive): Same.
	(is_call_safe): Same.
	(try_substitute_return_value): Same.
	(sprintf_dom_walker::handle_printf_call): Rename...
	(handle_printf_call): ...to this.  Initialize target to host charmap
	here instead of in pass_sprintf_length::execute.
	(struct call_info): Make global.
	(sprintf_dom_walker::compute_format_length): Make global.
	(sprintf_dom_walker::handle_gimple_call): Same.
	* passes.def (pass_sprintf_length): Replace with pass_strlen.
	* print-rtl.c (print_pattern): Reduce the number of spaces to
	avoid -Wformat-truncation.
	* tree-pass.h (make_pass_warn_printf): New function.
	* tree-ssa-strlen.c (strlen_optimize): New variable.
	(get_string_length): Add comments.
	(get_range_strlen_dynamic): New function.
	(check_and_optimize_call): New function.
	(handle_integral_assign): New function.
	(strlen_check_and_optimize_stmt): Factor code out into
	strlen_check_and_optimize_call and handle_integral_assign.
	(strlen_dom_walker::evrp): New member.
	(strlen_dom_walker::before_dom_children): Use evrp member.
	(strlen_dom_walker::after_dom_children): Use evrp member.
	(printf_strlen_execute): New function.
	(pass_strlen::gate): Update to handle printf calls.
	(dump_strlen_info): New function.
	(pass_data_warn_printf): New variable.
	(pass_warn_printf): New class.
	* tree-ssa-strlen.h (get_range_strlen_dynamic): Declare.
	(handle_printf_call): Same.
	* tree-vrp.c (value_range_base::type): Adjust assertion.
	* vr-values.c (vr_values::update_value_range): Use type of the first
	argument rather than the second.

2019-08-26  Richard Biener  <rguenther@suse.de>

	* config/i386/i386-features.c (general_remove_non_convertible_regs):
	Remove.
	(convert_scalars_to_vector): Do not call it.

2019-08-26  Tejas Joshi  <tejasjoshi9673@gmail.com>
	    Uros Bizjak  <ubizjak@gmail.com>

	* builtins.c (mathfn_built_in_2): Change CASE_MATHFN to
	CASE_MATHFN_FLOATN for roundeven.
	* config/i386/i386.c (ix86_i387_mode_needed): Add case
	I387_ROUNDEVEN.
	(ix86_mode_needed): Likewise.
	(ix86_mode_after): Likewise.
	(ix86_mode_entry): Likewise.
	(ix86_mode_exit): Likewise.
	(ix86_emit_mode_set): Likewise.
	(emit_i387_cw_initialization): Add case I387_CW_ROUNDEVEN.
	* config/i386/i386.h (ix86_stack_slot): Add SLOT_CW_ROUNDEVEN.
	(ix86_entity): Add I387_ROUNDEVEN.
	(NUM_MODES_FOR_MODE_SWITCHING): Add I387_CW_ANY.
	* config/i386/i386.md: Define UNSPEC_FRNDINT_ROUNDEVEN.
	(define_int_iterator): Likewise.
	(define_int_attr): Likewise for rounding_insn, rounding and ROUNDING.
	(define_constant): Define ROUND_ROUNDEVEN mode.
	(define_attr): Add roundeven mode for i387_cw.
	(<rouding_insn><mode>2): Add condition for ROUND_ROUNDEVEN.
	* internal-fn.def (ROUNDEVEN): New builtin function.
	* optabs.def (roundeven_optab): New optab.

2019-08-26  Tejas Joshi  <tejasjoshi9673@gmail.com>

	* builtins.c (mathfn_built_in_2): Added CASE_MATHFN_FLOATN
	for ROUNDEVEN.
	* builtins.def: Added function definitions for roundeven function
	variants.
	* fold-const-call.c (fold_const_call_ss): Added case for roundeven
	function call.  Adjust condition for floor, ceil, trunc and round.
	* fold-const.c (negate_mathfn_p): Added case for roundeven function.
	(tree_call_nonnegative_warnv_p): Added case for roundeven function.
	(integer_valued_real_call_p): Added case for roundeven function.
	* real.c (is_even): New function. Returns true if real number is even,
	otherwise returns false.
	(is_halfway_below): New function. Returns true if real number is
	halfway between two integers, else return false.
	(real_roundeven): New function. Round real number to nearest integer,
	rounding halfway cases towards even.
	* real.h (real_value): Added descriptive comments.  Added function
	declaration for roundeven function.
	* doc/extend.texi (Other Builtins): List roundeven variants among
	functions which can be handled as builtins.

2019-08-26  Richard Biener  <rguenther@suse.de>

	PR target/91522
	PR target/91527
	* config/i386/i386-features.h (general_scalar_chain::defs_map):
	New member.
	(general_scalar_chain::replace_with_subreg): Remove.
	(general_scalar_chain::replace_with_subreg_in_insn): Likewise.
	(general_scalar_chain::convert_reg): Adjust signature.
	* config/i386/i386-features.c (scalar_chain::add_insn): Do not
	iterate over all defs of a reg.
	(general_scalar_chain::replace_with_subreg): Remove.
	(general_scalar_chain::replace_with_subreg_in_insn): Likewise.
	(general_scalar_chain::make_vector_copies): Populate defs_map,
	place copy only after defs that are used as vectors in the chain.
	(general_scalar_chain::convert_reg): Emit a copy for a specific
	def in a specific instruction.
	(general_scalar_chain::convert_op): All reg uses are converted here.
	(general_scalar_chain::convert_insn): Emit copies for scalar
	uses of defs here.  Replace uses with the copies we created.
	Replace and convert the def.  Adjust REG_DEAD notes, remove
	REG_EQUIV/EQUAL notes.
	(general_scalar_chain::convert_registers): Only handle copies
	into the chain here.

2019-08-26  Robin Dapp  <rdapp@linux.ibm.com>

	* match.pd: Add (T)(A) + CST -> (T)(A + CST).

2019-08-26  Robin Dapp  <rdapp@linux.ibm.com>

	* gimple-loop-versioning.cc (loop_versioning::record_address_fragment):
	Add nop_convert case.
	* tree-ssa-propagate.c (substitute_and_fold_dom_walker::before_dom_children):
	Fold all statements if requested.
	* tree-ssa-propagate.h (class substitute_and_fold_engine):
	Allow to fold all statements.
	* tree-vrp.c (class vrp_folder):
	Let substitute_and_fold_engine fold all statements.

2019-08-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91526
	* passes.def: Note that after late FRE we do TODO_update_address_taken.
	* tree-ssa-sccvn.c (pass_fre::execute): In late mode schedule
	TODO_update_address_taken.

2019-08-26  Gerald Pfeifer  <gerald@pfeifer.com>

	* config/i386/gmm_malloc.h: Only use <errno.h> and errno if
	__STDC_HOSTED__.

2019-08-23  Mihailo Stojanovic  <mistojanovic@wavecomp.com>

	* config/mips/mips.md (mips_get_fcsr, *mips_get_fcsr): Use SI
	machine mode for unspec_volatile operand.

2019-08-23  Wilco Dijkstra  <wdijkstr@arm.com>

	* doc/invoke.texi (mneon-for-64bits): Deprecate option.
	* config/arm/arm.opt (mneon-for-64bits): Deprecate option.
	* config/arm/arm.h (TARGET_PREFER_NEON_64BITS): Remove.
	(prefer_neon_for_64bits): Remove.
	* config/arm/arm.c (prefer_neon_for_64bits): Remove.
	(tune_params): Remove PREF_NEON_64_FALSE uses.
	(arm_option_override): Remove prefer_neon selection code.
	(arm_print_tune_info): Remove prefer_neon_for_64bits.
	* config/arm/arm-protos.h (tune_params): Remove
	prefer_neon_for_64bits.
	(prefer_neon_for_64bits): Remove.

2019-08-23  Iain Sandoe  <iain@sandoe.co.uk>

	PR pch/61250
	* ggc-page.c (ggc_pch_read): Read the ggc_pch_ondisk structure
	and issue any diagnostics needed before collecting the pre-PCH
	state.

2019-08-23  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/91283
	* common.opt (fexcess-precision=): Add Optimization flag.  Use
	flag_excess_precision variable instead of
	flag_excess_precision_cmdline.
	* flags.h (class target_flag_state): Remove x_flag_excess_precision
	member.
	(flag_excess_precision): Don't define.
	* langhooks.c (lhd_post_options): Set flag_excess_precision instead of
	flag_excess_precision_cmdline.  Remove comment.
	* opts.c (set_fast_math_flags): Use frontend_set_flag_excess_precision
	and x_flag_excess_precision instead of
	frontend_set_flag_excess_precision_cmdline and
	x_flag_excess_precision_cmdline.
	(fast_math_flags_set_p): Use x_flag_excess_precision instead of
	x_flag_excess_precision_cmdline.
	* toplev.c (init_excess_precision): Remove.
	(lang_dependent_init_target): Don't call it.

2019-08-23  Martin Liska  <mliska@suse.cz>

	* lto-wrapper.c (run_gcc): When setting jobserver
	set also parallel to 1.  This was done so before r273908.

2019-08-23  Dennis Zhang  <dennis.zhang@arm.com>

	* config/arm/arm-cpus.in (cortex-m35p): New entry.
	(cortex-a76ae): Likewise.
	(cortex-a77): Likewise
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Likewise.
	* doc/invoke.texi (ARM Options): Document cortex-m35p, cortx-a76ae,
	cortex-a77 CPU options.

2019-08-23  Martin Liska  <mliska@suse.cz>

	* profile.c (instrument_values): Do not set
	0 as last argument.
	* tree-profile.c (gimple_gen_interval_profiler): Remove
	last argument.
	(gimple_gen_pow2_profiler): Likewise.
	(gimple_gen_topn_values_profiler): Likewise.
	(gimple_gen_ic_profiler): Likewise.
	(gimple_gen_time_profiler): Likewise.
	(gimple_gen_average_profiler): Likewise.
	(gimple_gen_ior_profiler): Likewise.
	* value-prof.c (dump_histogram_value): Use default
	in switch statement instead of HIST_TYPE_MAX.
	(stream_in_histogram_value): Likewise.
	(gimple_duplicate_stmt_histograms): Do not
	use NULL for implicitly set arguments.
	(gimple_divmod_values_to_profile): Do not use
	reserve+quick_push.
	(gimple_indirect_call_to_profile): Likewise.
	(gimple_find_values_to_profile): Use implicit
	function call arguments.
	* value-prof.h (gimple_alloc_histogram_value):
	Set default values.
	(gimple_gen_interval_profiler): Remove last argument.
	(gimple_gen_pow2_profiler): Likewise.
	(gimple_gen_topn_values_profiler): Likewise.
	(gimple_gen_ic_profiler): Likewise.
	(gimple_gen_time_profiler): Likewise.
	(gimple_gen_average_profiler): Likewise.
	(gimple_gen_ior_profiler): Likewise.

2019-08-22  Martin Sebor  <msebor@redhat.com>

	PR middle-end/91490
	* builtins.c (c_strlen): Rename argument and introduce new local.
	Set no-warning bit on original argument.
	* expr.c (string_constant): Pass argument type to fold_ctor_reference.
	Fold empty and zero constructors into empty strings.
	* gimple-fold.c (fold_nonarray_ctor_reference): Return a STRING_CST
	for missing initializers.
	* tree.c (build_string_literal): Handle optional argument.
	* tree.h (build_string_literal): Add defaulted argument.
	* gimple-ssa-warn-restrict.c (maybe_diag_access_bounds): Check
	no-warning bit on original expression.

2019-08-22  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/91481
	* config/rs6000/rs6000.md (unspec): Delete UNSPEC_DARN, UNSPEC_DARN_32,
	and UNSPEC_DARN_RAW.
	(unspecv): New enumerator values UNSPECV_DARN, UNSPECV_DARN_32, and
	UNSPECV_DARN_RAW.
	(darn_32): Use an unspec_volatile, and UNSPECV_DARN_32.
	(darn_raw): Use an unspec_volatile, and UNSPECV_DARN_RAW.
	(darn): Use an unspec_volatile, and UNSPECV_DARN.

2019-08-22  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/altivec.md (unspec): Delete UNSPEC_DARN, UNSPEC_DARN_32,
	UNSPEC_DARN_RAW, UNSPEC_CMPRB, UNSPEC_CMPRB2, UNSPEC_CMPEQB; move to...
	* config/rs6000/rs6000.md (unspec): ... here.
	* config/rs6000/altivec.md (darn_32, darn_raw, darn, cmprb,
	*cmprb_internal, setb_signed, setb_unsigned, cmprb2, *cmprb2_internal,
	cmpeqb, *cmpeqb_internal): Delete, move to...
	* config/rs6000/rs6000.md (darn_32, darn_raw, darn, cmprb,
	*cmprb_internal, setb_signed, setb_unsigned, cmprb2, *cmprb2_internal,
	cmpeqb, *cmpeqb_internal): ... here.

2019-08-22  Kyrylo Tkachov <kyrylo.tkachov@arm.com>

	* config/arm/arm_acle.h: Use arch=armv8-a+crc+simd pragma for CRC32
	intrinsics if __ARM_FP.
	Use __ARM_FEATURE_CRC32 ifdef guard.

2019-08-22  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/arm.md (neon_for_64bits): Remove.
	(avoid_neon_for_64bits): Remove.
	(arm_adddi3): Always split early.
	(arm_subdi3): Always split early.
	(negdi2): Remove Neon expansion.
	(split zero_extend): Split before reload.
	(split sign_extend): Split before reload.

2019-08-22  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/iterators.md (qhs_extenddi_cstr): Update.
	(qhs_extenddi_cstr): Likewise.
	* config/arm/arm.md (ashldi3): Always expand early.
	(ashlsi3): Likewise.
	(ashrsi3): Likewise.
	(zero_extend<mode>di2): Remove Neon variants.
	(extend<mode>di2): Likewise.
	* config/arm/neon.md (ashldi3_neon_noclobber): Remove.
	(signed_shift_di3_neon): Likewise.
	(unsigned_shift_di3_neon): Likewise.
	(ashrdi3_neon_imm_noclobber): Likewise.
	(lshrdi3_neon_imm_noclobber): Likewise.
	(<shift>di3_neon): Likewise.
	(split extend): Remove DI extend split patterns.

2019-08-22  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/arm.md (split and/eor/ior): Remove Neon check.
	(split not): Add DImode not splitter.
	(anddi3): Remove pattern.
	(anddi3_insn): Likewise.
	(anddi_zesidi_di): Likewise.
	(anddi_sesdi_di): Likewise.
	(anddi_notdi_di): Likewise.
	(anddi_notzesidi_di): Likewise.
	(anddi_notsesidi_di): Likewise.
	(iordi3): Likewise.
	(iordi3_insn): Likewise.
	(iordi_zesidi_di): Likewise.
	(iordi_sesidi_di): Likewise.
	(xordi3): Likewise.
	(xordi3_insn): Likewise.
	(xordi_sesidi_di): Likewise.
	(xordi_zesidi_di): Likewise.
	(one_cmpldi2): Likewise.
	(one_cmpldi2_insn): Likewise.
	* config/arm/constraints.md: Remove De, Df, Dg constraints.
	* config/arm/iwmmxt.md (iwmmxt_iordi3): Remove general register
	alternative.
	(iwmmxt_xordi3): Likewise.
	(iwmmxt_anddi3): Likewise.
	* config/arm/neon.md (orndi3_neon): Remove pattern.
	(anddi_notdi_di): Likewise.
	* config/arm/predicates.md (arm_anddi_operand_neon): Remove.
	(arm_iordi_operand_neon): Likewise.
	(arm_xordi_operand_neon): Likewise.
	* config/arm/thumb2.md(iordi_notdi_di): Remove pattern.
	(iordi_notzesidi_di): Likewise.
	(iordi_notdi_zesidi): Likewise.
	(iordi_notsesidi_di): Likewise.

2019-08-22  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (iorsi3_compare0): Add alternative for 16-bit thumb
	insn.
	(iorsi3_compare0_scratch): Likewise.

2019-08-22  Sylvia Taylor  <sylvia.taylor@arm.com>

	* config/aarch64/aarch64-simd-builtins.def:
	(ld1x4): New.
	(st1x4): Likewise.
	* config/aarch64/aarch64-simd.md:
	(aarch64_ld1x4<VALLDIF:mode>): New pattern.
	(aarch64_st1x4<VALLDIF:mode>): Likewise.
	(aarch64_ld1_x4_<mode>): Likewise.
	(aarch64_st1_x4_<mode>): Likewise.
	* config/aarch64/arm_neon.h:
	(vld1_s8_x4): New function.
	(vld1q_s8_x4): Likewise.
	(vld1_s16_x4): Likewise.
	(vld1q_s16_x4): Likewise.
	(vld1_s32_x4): Likewise.
	(vld1q_s32_x4): Likewise.
	(vld1_u8_x4): Likewise.
	(vld1q_u8_x4): Likewise.
	(vld1_u16_x4): Likewise.
	(vld1q_u16_x4): Likewise.
	(vld1_u32_x4): Likewise.
	(vld1q_u32_x4): Likewise.
	(vld1_f16_x4): Likewise.
	(vld1q_f16_x4): Likewise.
	(vld1_f32_x4): Likewise.
	(vld1q_f32_x4): Likewise.
	(vld1_p8_x4): Likewise.
	(vld1q_p8_x4): Likewise.
	(vld1_p16_x4): Likewise.
	(vld1q_p16_x4): Likewise.
	(vld1_s64_x4): Likewise.
	(vld1_u64_x4): Likewise.
	(vld1_p64_x4): Likewise.
	(vld1q_s64_x4): Likewise.
	(vld1q_u64_x4): Likewise.
	(vld1q_p64_x4): Likewise.
	(vld1_f64_x4): Likewise.
	(vld1q_f64_x4): Likewise.
	(vst1_s8_x4): Likewise.
	(vst1q_s8_x4): Likewise.
	(vst1_s16_x4): Likewise.
	(vst1q_s16_x4): Likewise.
	(vst1_s32_x4): Likewise.
	(vst1q_s32_x4): Likewise.
	(vst1_u8_x4): Likewise.
	(vst1q_u8_x4): Likewise.
	(vst1_u16_x4): Likewise.
	(vst1q_u16_x4): Likewise.
	(vst1_u32_x4): Likewise.
	(vst1q_u32_x4): Likewise.
	(vst1_f16_x4): Likewise.
	(vst1q_f16_x4): Likewise.
	(vst1_f32_x4): Likewise.
	(vst1q_f32_x4): Likewise.
	(vst1_p8_x4): Likewise.
	(vst1q_p8_x4): Likewise.
	(vst1_p16_x4): Likewise.
	(vst1q_p16_x4): Likewise.
	(vst1_s64_x4): Likewise.
	(vst1_u64_x4): Likewise.
	(vst1_p64_x4): Likewise.
	(vst1q_s64_x4): Likewise.
	(vst1q_u64_x4): Likewise.
	(vst1q_p64_x4): Likewise.
	(vst1_f64_x4): Likewise.
	(vst1q_f64_x4): Likewise.

2019-08-22  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	* config/aarch64/aarch64-sve.md (vcond_mask): Add "@".

2019-08-22  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>
	    Richard Sandiford  <richard.sandiford@arm.com>

	PR target/88839
	* config/aarch64/aarch64.c (aarch64_evpc_sel): New function.
	(aarch64_expand_vec_perm_const_1): Call aarch64_evpc_sel.

2019-08-21  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/90724
	* config/aarch64/aarch64.c (aarch64_gen_compare_reg_maybe_ze): Force y
	in reg if it fails aarch64_plus_operand predicate.

2019-08-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91482
	* tree-ssa-ccp.c (ccp_folder::fold_stmt): Remove useless
	BUILT_IN_ASSUME_ALIGNED calls.

2019-08-21  Richard Biener  <rguenther@suse.de>

	PR target/91498
	PR target/91503
	* config/i386/i386-features.c
	(general_scalar_chain::make_vector_copies): Copy stack temporary
	rtx when using it multiple times.
	(general_scalar_chain::convert_reg): Likewise.

2019-08-20  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* function.c (assign_parm_find_stack_rtl): Use known_eq instead of ==.

2019-08-20  Matthew Beliveau  <mbelivea@redhat.com>

	* tree-ssa-dse.c (dse_optimize_redundant_stores): Improved check to
	catch more redundant zero initialization cases.
	(dse_dom_walker::dse_optimize_stmt): Likewise.

2019-08-20  Richard Biener  <rguenther@suse.de>

	PR lto/91307
	* ipa.c (cgraph_build_static_cdtor_1): Use names not recognizable
	by collect2 when targetm.have_ctors_dtors which avoids dragging
	in temporary filenames from LTO input objects.

2019-08-20  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/37242
	* tree-ssa-sccvn.c (visit_nary_op): Also CSE (T)(a + b)
	to (T)a + (T)b if we know that a + b does not overflow.

2019-08-20  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/91347
	* dse.c (scan_insn): Call add_wild_read for non-const/memset tail calls
	before reload if HARD_FRAME_POINTER_IS_ARG_POINTER.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

	* calls.h (function_arg_info): Add a pass_by_reference field,
	defaulting to false.
	* calls.c (apply_pass_by_reference_rules): Set pass_by_reference
	when applying pass-by-reference semantics.
	(initialize_argument_information): Likewise.
	(emit_library_call_value_1): Likewise.
	* function.c (assign_parm_data_one): Remove passed_pointer field.
	(assign_parm_find_data_types): Don't set it.
	(assign_parm_find_stack_rtl, assign_parm_adjust_stack_rtl)
	(assign_parm_setup_reg, assign_parms, gimplify_parameters): Use
	arg.pass_by_reference instead of passed_pointer.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

	* calls.c (emit_library_call_value_1): Merge arg and orig_arg
	into a single function_arg_info, updating its fields when we
	apply pass-by-reference and promotion semantics.  Use the
	function_arg_info to track the mode rather than keeping it in
	a separate local variable.
	(initialize_argument_information): Likewise.  Base the final
	arg_to_skip on this new function_arg_info rather than creating
	a new one from scratch.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

	* function.c (assign_parm_data_one): Replace passed_type,
	promoted_mode and named_arg with a function_arg_info field.
	(assign_parm_find_data_types): Remove local variables and
	assign directly to "data".  Make data->passed_mode shadow
	data->arg.mode until promotion, then assign the promoted
	mode to data->arg.mode.
	(assign_parms_setup_varargs, assign_parm_find_entry_rtl)
	(assign_parm_find_stack_rtl, assign_parm_adjust_entry_rtl)
	(assign_parm_remove_parallels, assign_parm_setup_block_p)
	(assign_parm_setup_block, assign_parm_setup_reg)
	(assign_parm_setup_stack, assign_parms, gimplify_parameters): Use
	arg.mode instead of promoted_mode, arg.type instead of passed_type
	and arg.named instead of named_arg.  Use data->arg for
	function_arg_info structures that had the field values passed_type,
	promoted_mode and named_arg.  Base other function_arg_infos on
	data->arg, changing the necessary properties.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

	* calls.h (apply_pass_by_reference_rules): Declare.
	* calls.c (apply_pass_by_reference_rules): New function.
	* config/c6x/c6x.c (c6x_call_saved_register_used): Use it.
	* config/rs6000/rs6000-call.c (rs6000_parm_needs_stack): Likewise.
	* config/s390/s390.c (s390_call_saved_register_used): Likewise.
	* function.c (assign_parm_find_data_types): Likewise.
	* var-tracking.c (prepare_call_arguments): Likewise.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (must_pass_in_stack): Take a function_arg_info instead
	of a mode and a type.
	* doc/tm.texi: Regenerate.
	* calls.h (must_pass_in_stack_var_size): Take a function_arg_info
	instead of a mode and a type.
	(must_pass_in_stack_var_size_or_pad): Likewise.
	* calls.c (must_pass_in_stack_var_size): Likewise.
	(must_pass_in_stack_var_size_or_pad): Likewise.
	(initialize_argument_information): Update call to
	targetm.calls.must_pass_in_stack.
	(must_pass_va_arg_on_stack): Likewise.
	* function.c (assign_parm_find_entry_rtl): Likewise.
	* targhooks.c (hook_pass_by_reference_must_pass_in_stack): Likewise.
	* config/alpha/alpha.c (alpha_function_arg): Likewise.
	(alpha_function_arg_advance): Likewise.
	* config/cr16/cr16.c (cr16_function_arg): Likewise.
	(cr16_function_arg_advance): Likewise.
	* config/cris/cris.c (cris_pass_by_reference): Likewise.
	(cris_arg_partial_bytes): Likewise.
	* config/iq2000/iq2000.c (iq2000_pass_by_reference): Likewise.
	* config/lm32/lm32.c (lm32_function_arg): Likewise.
	* config/mcore/mcore.c (mcore_num_arg_regs): Likewise.
	(mcore_function_arg, mcore_arg_partial_bytes): Likewise.
	* config/mips/mips.c (mips_pass_by_reference): Likewise.
	* config/mmix/mmix.c (mmix_function_arg_advance): Likewise.
	(mmix_function_arg_1, mmix_pass_by_reference): Likewise.
	* config/sh/sh.c (sh_pass_by_reference): Likewise.
	* config/stormy16/stormy16.c (xstormy16_function_arg): Likewise.
	* config/xtensa/xtensa.c (xtensa_function_arg_advance): Likewise.
	* config/arm/arm.c (arm_must_pass_in_stack): Take a function_arg_info
	instead of a mode and a type.
	* config/fr30/fr30.c (fr30_must_pass_in_stack): Likewise.
	(fr30_num_arg_regs): Likewise.
	(fr30_setup_incoming_varargs): Update calls accordingly.
	(fr30_arg_partial_bytes, fr30_function_arg): Likewise.
	(fr30_function_arg_advance): Likewise.
	* config/frv/frv.c (frv_must_pass_in_stack): Take a function_arg_info
	instead of a mode and a type.
	* config/gcn/gcn.c (num_arg_regs): Likewise.
	(gcn_function_arg, gcn_function_arg_advance): Update calls to
	num_arg_regs and targetm.calls.must_pass_in_stack.
	(gcn_arg_partial_bytes): Likewise.
	* config/i386/i386.c (ix86_must_pass_in_stack): Take a
	function_arg_info instead of a mode and a type.
	(classify_argument): Update call accordingly.
	* config/nds32/nds32.c (nds32_must_pass_in_stack): Take a
	function_arg_info instead of a mode and a type.
	* config/rs6000/rs6000-internal.h (rs6000_must_pass_in_stack):
	Likewise.
	* config/rs6000/rs6000-call.c (rs6000_must_pass_in_stack): Likewise.
	(rs6000_parm_needs_stack): Update call accordingly.
	(setup_incoming_varargs): Likewise.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (callee_copies): Take a function_arg_info instead
	of a mode, type and named flag.
	* doc/tm.texi: Regenerate.
	* targhooks.h (hook_callee_copies_named): Take a function_arg_info
	instead of a mode, type and named flag.
	(hook_bool_CUMULATIVE_ARGS_mode_tree_bool_false): Delete.
	(hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true): Likewise.
	(hook_bool_CUMULATIVE_ARGS_arg_info_true): New function.
	* targhooks.c (hook_callee_copies_named): Take a function_arg_info
	instead of a mode, type and named flag.
	(hook_bool_CUMULATIVE_ARGS_mode_tree_bool_false): Delete.
	(hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true): Likewise.
	(hook_bool_CUMULATIVE_ARGS_arg_info_true): New function.
	* calls.h (reference_callee_copied): Take a function_arg_info
	instead of a mode, type and named flag.
	* calls.c (reference_callee_copied): Likewise.
	(initialize_argument_information): Update call accordingly.
	(emit_library_call_value_1): Likewise.
	* function.c (gimplify_parameters): Likewise.
	* config/aarch64/aarch64.c (TARGET_CALLEE_COPIES): Define to
	hook_bool_CUMULATIVE_ARGS_arg_info_false instead of
	hook_bool_CUMULATIVE_ARGS_mode_tree_bool_false.
	* config/c6x/c6x.c (c6x_callee_copies): Delete.
	(TARGET_CALLEE_COPIES): Define to
	hook_bool_CUMULATIVE_ARGS_arg_info_true instead.
	* config/epiphany/epiphany.c (TARGET_CALLEE_COPIES): Define to
	hook_bool_CUMULATIVE_ARGS_arg_info_true instead of
	hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true.
	* config/mips/mips.c (mips_callee_copies): Take a function_arg_info
	instead of a mode, type and named flag.
	* config/mmix/mmix.c (TARGET_CALLEE_COPIES): Define to
	hook_bool_CUMULATIVE_ARGS_arg_info_true instead of
	hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true.
	* config/mn10300/mn10300.c (TARGET_CALLEE_COPIES): Likewise.
	* config/msp430/msp430.c (msp430_callee_copies): Delete.
	(TARGET_CALLEE_COPIES): Define to
	hook_bool_CUMULATIVE_ARGS_arg_info_true instead.
	* config/pa/pa.c (pa_callee_copies): Take a function_arg_info
	instead of a mode, type and named flag.
	* config/sh/sh.c (sh_callee_copies): Likewise.
	* config/v850/v850.c (TARGET_CALLEE_COPIES): Define to
	hook_bool_CUMULATIVE_ARGS_arg_info_true instead of
	hook_bool_CUMULATIVE_ARGS_mode_tree_bool_true.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (function_arg_advance): Take a function_arg_info instead
	of a mode, type and named flag.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_function_arg_advance): Take a function_arg_info
	instead of a mode, type and named flag.
	* targhooks.c (default_function_arg_advance): Likewise.
	* calls.c (initialize_argument_information): Update call to
	targetm.calls.function_arg_advance.
	(emit_library_call_value_1): Likewise.
	* dse.c (get_call_args): Likewise.
	* expr.c (block_move_libcall_safe_for_call_parm): Likewise.
	* function.c (assign_parms, gimplify_parameters): Likewise.
	* var-tracking.c (prepare_call_arguments): Likewise.
	* config/aarch64/aarch64.c (aarch64_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	(aarch64_setup_incoming_varargs): Update call accordingly.
	* config/alpha/alpha.c (alpha_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	(alpha_setup_incoming_varargs): Update call accordingly.
	* config/arc/arc.c (arc_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	(arc_setup_incoming_varargs): Update call accordingly.
	* config/arm/arm.c (arm_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	(cmse_func_args_or_return_in_stack): Update call accordingly.
	(arm_function_ok_for_sibcall): Likewise.
	(cmse_nonsecure_call_clear_caller_saved): Likewise.
	* config/avr/avr.c (avr_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/bfin/bfin.c (bfin_function_arg_advance): Likewise.
	* config/c6x/c6x.c (c6x_function_arg_advance): Likewise.
	(c6x_call_saved_register_used): Update call accordingly.
	* config/cr16/cr16.c (cr16_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/cris/cris.c (cris_function_arg_advance): Likewise.
	* config/csky/csky.c (csky_function_arg_advance): Likewise.
	(csky_setup_incoming_varargs): Update call accordingly.
	* config/epiphany/epiphany.c (epiphany_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/fr30/fr30.c (fr30_function_arg_advance): Likewise.
	* config/frv/frv.c (frv_function_arg_advance): Likewise.
	* config/ft32/ft32.c (ft32_function_arg_advance): Likewise.
	* config/gcn/gcn.c (gcn_function_arg_advance): Likewise.
	* config/h8300/h8300.c (h8300_function_arg_advance): Likewise.
	* config/i386/i386.c (ix86_function_arg_advance): Likewise.
	(ix86_setup_incoming_varargs): Update call accordingly.
	* config/ia64/ia64.c (ia64_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	(ia64_setup_incoming_varargs): Update call accordingly.
	* config/iq2000/iq2000.c (iq2000_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	(iq2000_expand_prologue): Update call accordingly.
	* config/lm32/lm32.c (lm32_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/m32c/m32c.c (m32c_function_arg_advance): Likewise.
	* config/m32r/m32r.c (m32r_function_arg_advance): Likewise.
	* config/m68k/m68k.c (m68k_function_arg_advance): Likewise.
	* config/mcore/mcore.c (mcore_function_arg_advance): Likewise.
	* config/microblaze/microblaze.c (microblaze_function_arg_advance):
	Likewise.
	(microblaze_expand_prologue): Update call accordingly.
	* config/mips/mips.c (mips_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	(mips_setup_incoming_varargs): Update call accordingly.
	(mips_output_args_xfer): Likewise.
	* config/mmix/mmix.c (mmix_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/mn10300/mn10300.c (mn10300_function_arg_advance): Likewise.
	* config/moxie/moxie.c (moxie_function_arg_advance): Likewise.
	* config/msp430/msp430.c (msp430_function_arg_advance): Likewise.
	* config/nds32/nds32.c (nds32_function_arg_advance): Likewise.
	* config/nios2/nios2.c (nios2_function_arg_advance): Likewise.
	(nios2_setup_incoming_varargs): Update call accordingly.
	* config/nvptx/nvptx.c (nvptx_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/or1k/or1k.c (or1k_function_arg_advance): Likewise.
	* config/pa/pa.c (pa_function_arg_advance): Likewise.
	* config/pdp11/pdp11.c (pdp11_function_arg_advance): Likewise.
	* config/pru/pru.c (pru_function_arg_advance): Likewise.
	* config/riscv/riscv.c (riscv_function_arg_advance): Likewise.
	(riscv_setup_incoming_varargs): Update call accordingly.
	* config/rl78/rl78.c (rl78_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/rs6000/rs6000-internal.h (rs6000_function_arg_advance):
	Likewise.
	* config/rs6000/rs6000-call.c (rs6000_function_arg_advance): Likewise.
	(rs6000_parm_needs_stack): Update call accordingly.
	* config/rx/rx.c (rx_function_arg_advance): Take a function_arg_info
	instead of a mode, type and named flag.
	* config/s390/s390.c (s390_function_arg_advance): Likewise.
	(s390_call_saved_register_used): Update call accordingly.
	* config/sh/sh.c (sh_function_arg_advance): Take a function_arg_info
	instead of a mode, type and named flag.
	(sh_output_mi_thunk): Update call accordingly.
	* config/sparc/sparc.c (sparc_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/spu/spu.c (spu_function_arg_advance): Likewise.
	(spu_setup_incoming_varargs): Update call accordingly.
	* config/stormy16/stormy16.c (xstormy16_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/tilegx/tilegx.c (tilegx_function_arg_advance): Likewise.
	(tilegx_setup_incoming_varargs): Update call accordingly.
	* config/tilepro/tilepro.c (tilepro_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	(tilegx_setup_incoming_varargs): Update call accordingly.
	* config/v850/v850.c (v850_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/vax/vax.c (vax_function_arg_advance): Likewise.
	* config/visium/visium.c (visium_function_arg_advance): Likewise.
	(visium_setup_incoming_varargs): Update call accordingly.
	* config/xtensa/xtensa.c (xtensa_function_arg_advance): Take a
	function_arg_info instead of a mode, type and named flag.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (function_arg, function_incoming_arg): Take a
	function_arg_info instead of a mode, tree and named flag.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_function_arg): Take a function_arg_info
	instead of a mode, tree and named flag.
	(default_function_incoming_arg): Likewise.
	* targhooks.c (default_function_arg): Likewise.
	(default_function_incoming_arg): Likewise.
	* calls.h (function_arg_info::end_marker_p): New function.
	(function_arg_info::end_marker): Likewise.
	* calls.c (prepare_call_address, initialize_argument_information)
	(expand_call, emit_library_call_value_1): Update calls to
	targetm.calls.function_arg and targetm.calls.function_incoming_arg.
	* dse.c: Include calls.h.
	(get_call_args): Update call to targetm.calls.function_arg.
	* expr.c (block_move_libcall_safe_for_call_parm): Likewise.
	* var-tracking.c (prepare_call_arguments): Likewise.
	* function.c (assign_parm_find_entry_rtl): Update call to
	targetm.calls.function_incoming_arg.
	* config/aarch64/aarch64.c (aarch64_function_arg): Take a
	function_arg_info instead of a mode, tree and named flag.
	* config/alpha/alpha.c (alpha_function_arg): Likewise.
	* config/arc/arc.c (arc_function_arg): Likewise.
	* config/arm/arm.c (arm_function_arg): Likewise.
	(cmse_func_args_or_return_in_stack): Update call accordingly.
	(arm_function_ok_for_sibcall): Likewise.
	(cmse_nonsecure_call_clear_caller_saved): Likewise.
	* config/avr/avr.c (avr_function_arg): Take a function_arg_info
	instead of a mode, tree and named flag.
	* config/bfin/bfin.c (bfin_function_arg): Likewise.
	* config/c6x/c6x.c (c6x_function_arg): Likewise.
	(c6x_call_saved_register_used): Update call accordingly.
	* config/cr16/cr16.c (cr16_function_arg): Take a function_arg_info
	instead of a mode, tree and named flag.
	* config/cris/cris.c (cris_function_arg, cris_function_incoming_arg)
	(cris_function_arg_1): Likewise.
	* config/csky/csky.c (csky_function_arg): Likewise.
	* config/epiphany/epiphany.c (epiphany_function_arg): Likewise.
	* config/fr30/fr30.c (fr30_function_arg): Likewise.
	* config/frv/frv.c (frv_function_arg, frv_function_incoming_arg)
	(frv_function_arg_1): Likewise.
	* config/ft32/ft32.c (ft32_function_arg): Likewise.
	* config/gcn/gcn.c (gcn_function_arg): Likewise.
	* config/h8300/h8300.c (h8300_function_arg): Likewise.
	* config/i386/i386.c (ix86_function_arg): Likewise.
	* config/ia64/ia64.c (ia64_function_arg, ia64_function_incoming_arg)
	(ia64_function_arg_1): Likewise.
	* config/iq2000/iq2000.c (iq2000_function_arg): Likewise.
	(iq2000_expand_prologue, iq2000_pass_by_reference): Update call
	accordingly.
	* config/lm32/lm32.c (lm32_function_arg): Take a function_arg_info
	instead of a mode, tree and named flag.
	* config/m32c/m32c.c (m32c_function_arg): Likewise.
	* config/m32r/m32r.c (m32r_function_arg): Likewise.
	* config/m68k/m68k.c (m68k_function_arg): Likewise.
	* config/mcore/mcore.c (mcore_function_arg): Likewise.
	* config/microblaze/microblaze.c (microblaze_function_arg): Likewise.
	(microblaze_expand_prologue): Update call accordingly.
	* config/mips/mips.c (mips_function_arg): Take a function_arg_info
	instead of a mode, tree and named flag.
	* config/mmix/mmix.c (mmix_function_incoming_arg, mmix_function_arg)
	(mmix_function_arg_1): Likewise.
	* config/mn10300/mn10300.c (mn10300_function_arg): Likewise.
	* config/moxie/moxie.c (moxie_function_arg): Likewise.
	* config/msp430/msp430.c (msp430_function_arg): Likewise.
	* config/nds32/nds32.c (nds32_function_arg): Likewise.
	* config/nios2/nios2.c (nios2_function_arg): Likewise.
	* config/nvptx/nvptx.c (nvptx_function_arg): Likewise.
	(nvptx_function_incoming_arg): Likewise.
	* config/or1k/or1k.c (or1k_function_arg): Likewise.
	* config/pa/pa.c (pa_function_arg): Likewise.
	* config/pdp11/pdp11.c (pdp11_function_arg): Likewise.
	* config/pru/pru.c (pru_function_arg): Likewise.
	* config/riscv/riscv.c (riscv_function_arg): Likewise.
	* config/rl78/rl78.c (rl78_function_arg): Likewise.
	* config/rs6000/rs6000-internal.h (rs6000_function_arg): Likewise.
	* config/rs6000/rs6000-call.c (rs6000_function_arg): Likewise.
	(rs6000_parm_needs_stack): Update call accordingly.
	* config/rx/rx.c (rx_function_arg): Take a function_arg_info
	instead of a mode, tree and named flag.
	* config/s390/s390.c (s390_function_arg): Likewise.
	(s390_call_saved_register_used): Update call accordingly.
	* config/sh/sh.c (sh_function_arg): Take a function_arg_info
	instead of a mode, tree and named flag.
	(sh_output_mi_thunk): Update call accordingly.
	* config/sparc/sparc.c (sparc_function_arg_1, sparc_function_arg)
	(sparc_function_incoming_arg): Take a function_arg_info instead of
	a mode, tree and named flag.
	* config/spu/spu.c (spu_function_arg): Likewise.
	* config/stormy16/stormy16.c (xstormy16_function_arg): Likewise.
	* config/tilegx/tilegx.c (tilegx_function_arg): Likewise.
	* config/tilepro/tilepro.c (tilepro_function_arg): Likewise.
	* config/v850/v850.c (v850_function_arg): Likewise.
	* config/vax/vax.c (vax_function_arg): Likewise.
	* config/visium/visium.c (visium_function_arg): Likewise.
	* config/xtensa/xtensa.c (xtensa_function_arg_1, xtensa_function_arg)
	(xtensa_function_incoming_arg): Likewise.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (setup_incoming_varargs): Take a function_arg_info
	instead of a mode and tree.
	* doc/tm.texi: Regenerate.
	* targhooks.h (default_setup_incoming_varargs): Take a
	function_arg_info instead of a mode and tree.
	* targhooks.c (default_setup_incoming_varargs): Likewise.
	* config/aarch64/aarch64.c (aarch64_setup_incoming_varargs): Likewise.
	* config/alpha/alpha.c (alpha_setup_incoming_varargs): Likewise.
	* config/arc/arc.c (arc_setup_incoming_varargs): Likewise.
	* config/arm/arm.c (arm_setup_incoming_varargs): Likewise.
	* config/bfin/bfin.c (setup_incoming_varargs): Likewise.
	* config/cris/cris.c (cris_setup_incoming_varargs): Likewise.
	* config/csky/csky.c (csky_setup_incoming_varargs): Likewise.
	* config/epiphany/epiphany.c (epiphany_setup_incoming_varargs):
	Likewise.
	* config/fr30/fr30.c (fr30_setup_incoming_varargs): Likewise.
	* config/frv/frv.c (frv_setup_incoming_varargs): Likewise.
	* config/ft32/ft32.c (ft32_setup_incoming_varargs): Likewise.
	* config/i386/i386.c (ix86_setup_incoming_varargs): Likewise.
	* config/ia64/ia64.c (ia64_setup_incoming_varargs): Likewise.
	* config/iq2000/iq2000.c (iq2000_setup_incoming_varargs): Likewise.
	* config/lm32/lm32.c (lm32_setup_incoming_varargs): Likewise.
	* config/m32r/m32r.c (m32r_setup_incoming_varargs): Likewise.
	* config/mcore/mcore.c (mcore_setup_incoming_varargs): Likewise.
	* config/mips/mips.c (mips_setup_incoming_varargs): Likewise.
	* config/mmix/mmix.c (mmix_setup_incoming_varargs): Likewise.
	* config/moxie/moxie.c (moxie_setup_incoming_varargs): Likewise.
	* config/nds32/nds32.c (nds32_setup_incoming_varargs): Likewise.
	* config/nios2/nios2.c (nios2_setup_incoming_varargs): Likewise.
	* config/riscv/riscv.c (riscv_setup_incoming_varargs): Likewise.
	* config/rs6000/rs6000-internal.h (setup_incoming_varargs): Likewise.
	* config/rs6000/rs6000-call.c (setup_incoming_varargs): Likewise.
	* config/sh/sh.c (sh_setup_incoming_varargs): Likewise.
	* config/spu/spu.c (spu_setup_incoming_varargs): Likewise.
	* config/tilegx/tilegx.c (tilegx_setup_incoming_varargs): Likewise.
	* config/tilepro/tilepro.c (tilepro_setup_incoming_varargs): Likewise.
	* config/visium/visium.c (visium_setup_incoming_varargs): Likewise.
	* function.c (assign_parms_setup_varargs): Update call to
	targetm.calls.setup_incoming_varargs.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (pass_by_reference): Take a function_arg_info instead
	of a mode, type and named flag.
	* doc/tm.texi: Regenerate.
	* targhooks.h (hook_pass_by_reference_must_pass_in_stack): Update
	accordingly.
	(hook_bool_CUMULATIVE_ARGS_arg_info_false): Declare.
	* targhooks.c (hook_pass_by_reference_must_pass_in_stack): Take a
	function_arg_info instead of a mode, type and named flag.
	(hook_bool_CUMULATIVE_ARGS_arg_info_false): New function.
	* calls.h (pass_by_reference): Take a function_arg_info instead of a
	mode, type and named flag.
	* calls.c (pass_by_reference): Likewise.
	(pass_va_arg_by_reference): Update call accordingly.
	(initialize_argument_information): Likewise.
	(emit_library_call_value_1): Likewise.
	* function.c (assign_parm_find_data_types): Likewise.
	* var-tracking.c (prepare_call_arguments): Likewise.
	* stor-layout.c: Include calls.h.
	(compute_record_mode): Update call to targetm.calls.pass_by_reference.
	* config/aarch64/aarch64.c (aarch64_pass_by_reference): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/alpha/alpha.c (alpha_pass_by_reference): Likewise.
	* config/arc/arc.c (arc_pass_by_reference): Likewise.
	* config/arm/arm.c (arm_pass_by_reference): Likewise.
	* config/bfin/bfin.c (bfin_pass_by_reference): Likewise.
	* config/c6x/c6x.c (c6x_pass_by_reference): Likewise.
	(c6x_call_saved_register_used): Update call to pass_by_reference.
	* config/cris/cris.c (cris_pass_by_reference): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/epiphany/epiphany.c (epiphany_pass_by_reference): Take a
	function_arg_info instead of a mode, type and named flag.
	(epiphany_arg_partial_bytes): Update call accordingly.
	* config/ft32/ft32.c (ft32_pass_by_reference): Take a
	function_arg_info instead of a mode, type and named flag.
	(ft32_arg_partial_bytes): Update call accordingly.
	* config/i386/i386.c (ix86_pass_by_reference): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/iq2000/iq2000.c (iq2000_pass_by_reference): Likewise.
	* config/m32c/m32c.c (m32c_pass_by_reference): Likewise.
	* config/m32r/m32r.c (m32r_pass_by_reference): Likewise.
	(m32r_return_in_memory): Update call accordingly.
	* config/mips/mips.c (mips_pass_by_reference): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/mmix/mmix.c (mmix_pass_by_reference): Likewise.
	* config/mn10300/mn10300.c (mn10300_pass_by_reference): Likewise.
	* config/moxie/moxie.c (moxie_pass_by_reference): Likewise.
	(moxie_arg_partial_bytes): Update call accordingly.
	* config/msp430/msp430.c (msp430_pass_by_reference): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/nvptx/nvptx.c (nvptx_pass_by_reference): Likewise.
	* config/or1k/or1k.c (or1k_pass_by_reference): Likewise.
	* config/pa/pa.c (pa_pass_by_reference): Likewise.
	* config/riscv/riscv.c (riscv_pass_by_reference): Likewise.
	(riscv_return_in_memory): Update call accordingly.
	* config/rs6000/rs6000-internal.h (rs6000_pass_by_reference): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/rs6000/rs6000-call.c (rs6000_pass_by_reference): Likewise.
	(rs6000_parm_needs_stack): Update call to pass_by_reference.
	* config/s390/s390.c (s390_pass_by_reference): Take a
	function_arg_info instead of a mode, type and named flag.
	(s390_call_saved_register_used): Update call accordingly.
	* config/sh/sh.c (sh_pass_by_reference): Take a function_arg_info
	instead of a mode, type and named flag.
	* config/sparc/sparc.c (sparc_pass_by_reference): Likewise.
	* config/spu/spu.c (spu_pass_by_reference): Likewise.
	* config/tilegx/tilegx.c (tilegx_pass_by_reference): Likewise.
	* config/tilepro/tilepro.c (tilepro_pass_by_reference): Likewise.
	* config/v850/v850.c (v850_pass_by_reference): Likewise.
	* config/visium/visium.c (visium_pass_by_reference): Likewise.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (arg_partial_bytes): Take a function_arg_info instead
	of a mode, type and named flag.
	* doc/tm.texi: Regenerate.
	* target.h (function_arg_info): Declare.
	* calls.h (function_arg_info): New class.
	* targhooks.h (hook_int_CUMULATIVE_ARGS_mode_tree_bool_0): Delete.
	(hook_int_CUMULATIVE_ARGS_arg_info_0): Declare.
	* targhooks.c (hook_int_CUMULATIVE_ARGS_mode_tree_bool_0): Delete.
	(hook_int_CUMULATIVE_ARGS_arg_info_0): New function.
	* calls.c (initialize_argument_information): Update call to
	targetm.calls.partial_bytes.
	(emit_library_call_value_1): Likewise.
	* expr.c (block_move_libcall_safe_for_call_parm): Likewise.
	* function.c (assign_parm_find_entry_rtl): Likewise.
	* config/alpha/alpha.c (alpha_arg_partial_bytes): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/arc/arc.c (arc_arg_partial_bytes): Likewise.
	* config/arm/arm.c (arm_arg_partial_bytes): Likewise.
	(cmse_func_args_or_return_in_stack): Update accordingly.
	* config/bfin/bfin.c (bfin_arg_partial_bytes): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/cris/cris.c (cris_arg_partial_bytes): Likewise.
	* config/csky/csky.c (csky_arg_partial_bytes): Likewise.
	* config/epiphany/epiphany.c (epiphany_arg_partial_bytes): Likewise.
	* config/fr30/fr30.c: Include calls.h.
	(fr30_arg_partial_bytes): Take a function_arg_info instead of a mode,
	type and named flag.
	* config/frv/frv.c: Include calls.h.
	(frv_arg_partial_bytes): Take a function_arg_info instead of a mode,
	type and named flag.
	* config/ft32/ft32.c (ft32_arg_partial_bytes): Likewise.
	* config/gcn/gcn.c (gcn_arg_partial_bytes): Likewise.
	* config/ia64/ia64.c (ia64_arg_partial_bytes): Likewise.
	* config/iq2000/iq2000.c (iq2000_arg_partial_bytes): Likewise.
	* config/m32r/m32r.c (m32r_arg_partial_bytes): Likewise.
	* config/mcore/mcore.c (mcore_arg_partial_bytes): Likewise.
	* config/microblaze/microblaze.c (function_arg_partial_bytes):
	Likewise.
	* config/mips/mips.c (mips_arg_partial_bytes): Likewise.
	* config/mn10300/mn10300.c (mn10300_arg_partial_bytes): Likewise.
	* config/moxie/moxie.c (moxie_arg_partial_bytes): Likewise.
	* config/msp430/msp430.c (msp430_arg_partial_bytes): Likewise.
	* config/nds32/nds32.c (nds32_arg_partial_bytes): Likewise.
	* config/nios2/nios2.c (nios2_arg_partial_bytes): Likewise.
	* config/pa/pa.c (pa_arg_partial_bytes): Likewise.
	* config/pru/pru.c (pru_arg_partial_bytes): Likewise.
	* config/riscv/riscv.c (riscv_arg_partial_bytes): Likewise.
	* config/rs6000/rs6000-internal.h (rs6000_arg_partial_bytes): Likewise.
	* config/rs6000/rs6000-call.c (rs6000_arg_partial_bytes): Likewise.
	(rs6000_parm_needs_stack): Update call accordingly.
	* config/sh/sh.c (sh_arg_partial_bytes): Take a
	function_arg_info instead of a mode, type and named flag.
	* config/sparc/sparc.c (sparc_arg_partial_bytes): Likewise.
	* config/v850/v850.c (v850_arg_partial_bytes): Likewise.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

	* calls.h (must_pass_va_arg_in_stack): Declare.
	* calls.c (must_pass_va_arg_in_stack): New function.
	* config/alpha/alpha.c (alpha_gimplify_va_arg_1): Use it.
	* config/sh/sh.c (sh_gimplify_va_arg_expr): Likewise.
	* config/stormy16/stormy16.c (xstormy16_gimplify_va_arg_expr):
	Likewise.
	* config/xtensa/xtensa.c (xtensa_gimplify_va_arg_expr): Likewise.

2019-08-20  Richard Sandiford  <richard.sandiford@arm.com>

	* calls.h (pass_va_arg_by_reference): Declare.
	* calls.c (pass_va_arg_by_reference): New function.
	* config/aarch64/aarch64.c (aarch64_gimplify_va_arg_expr): Use it.
	* config/alpha/alpha.c (alpha_gimplify_va_arg): Likewise.
	* config/gcn/gcn.c (gcn_gimplify_va_arg_expr): Likewise.
	* config/i386/i386.c (ix86_gimplify_va_arg): Likewise.
	* config/ia64/ia64.c (ia64_gimplify_va_arg): Likewise.
	* config/mips/mips.c (mips_std_gimplify_va_arg_expr): Likewise.
	(mips_gimplify_va_arg_expr): Likewise.
	* config/msp430/msp430.c (msp430_gimplify_va_arg_expr): Likewise.
	* config/pa/pa.c (hppa_gimplify_va_arg_expr): Likewise.
	* config/rs6000/rs6000-call.c (rs6000_gimplify_va_arg): Likewise.
	* config/s390/s390.c (s390_gimplify_va_arg): Likewise.
	* config/sparc/sparc.c (sparc_gimplify_va_arg): Likewise.
	* config/spu/spu.c (spu_gimplify_va_arg_expr): Likewise.
	* config/tilegx/tilegx.c (tilegx_gimplify_va_arg_expr): Likewise.
	* config/tilepro/tilepro.c (tilepro_gimplify_va_arg_expr): Likewise.
	* config/visium/visium.c (visium_gimplify_va_arg): Likewise.
	* config/xtensa/xtensa.c (xtensa_gimplify_va_arg_expr): Likewise.
	* targhooks.c (std_gimplify_va_arg_expr): Likewise.

2019-08-20  Richard Biener  <rguenther@suse.de>

	PR target/91498
	* config/i386/i386-features.c (general_scalar_chain::convert_op):
	Use (vec_merge (vec_duplicate..)) style vector from scalar move.
	(convert_scalars_to_vector): Add timode_p parameter and use it
	to guard TImode-only operation.
	(pass_stv::gate): Adjust so STV runs twice for TARGET_64BIT.
	(pass_stv::execute): Pass down timode_p.

2019-08-20  Lili Cui  <lili.cui@intel.com>

	* common/config/i386/i386-common.c
	(processor_names): Add tigerlake and cooperlake.
	(processor_alias_table): Add tigerlake and cooperlake.
	* config.gcc: Add -march=tigerlake and cooperlake.
	* config/i386/driver-i386.c
	(host_detect_local_cpu): Detect tigerlake and cooperlake.
	Add "has_avx" to classify processor.
	* config/i386/i386-builtins.c (processor_model) :
	Add M_INTEL_COREI7_TIGERLAKE and M_INTEL_COREI7_COOPERLAKE.
	(arch_names_table): Add tigerlake and cooperlake.
	(get_builtin_code_for_version): Handle PROCESSOR_TIGERLAKE
	and PROCESSOR_COOPERLAKE.
	* config/i386/i386-c.c
	(ix86_target_macros_internal): Handle tigerlake and cooperlake.
	* config/i386/i386-options.c
	(m_TIGERLAKE): Define.
	(m_COOPERLAKE): Ditto.
	(m_CORE_AVX512): Ditto.
	(processor_cost_table): Add cascadelake.
	(ix86_option_override_internal): Hadle PTA_MOVDIRI, PTA_MOVDIR64B.
	* config/i386/i386.h
	(ix86_size_cost): Define TARGET_TIGERLAKE and TARGET_COOPERLAKE.
	(processor_type): Add PROCESSOR_TIGERLAKE and PROCESSOR_COOPERLAKE.
	(PTA_MOVDIRI): Ditto.
	(PTA_MOVDIR64B): Ditto.
	(PTA_COOPERLAKE): Ditto.
	(PTA_TIGERLAKE): Ditto.
	(processor_type): Add PROCESSOR_TIGERLAKE and PROCESSOR_COOPERLAKE.
	* doc/extend.texi: Add tigerlake and cooperlake.
	* doc/invoke.texi: Add tigerlake and cooperlake.

2019-08-20  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/install.texi (Specific, alpha): Remove note to use
	binutils 2.11.2 or later.

2019-08-20  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR middle-end/89544
	* function.c (assign_parm_find_stack_rtl): Use larger alignment
	when possible.

2019-08-19  Joel Hutton  <Joel.Hutton@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_fpconst_pow2_recip): New prototype
	* config/aarch64/aarch64.c (aarch64_fpconst_pow2_recip): New function
	* config/aarch64/aarch64.md (*aarch64_<su_optab>cvtf<fcvt_target><GPF:mode>2_mult): New pattern
	(*aarch64_<su_optab>cvtf<fcvt_iesize><GPF:mode>2_mult): New pattern
	* config/aarch64/constraints.md (Dt): New constraint
	* config/aarch64/predicates.md (aarch64_fpconst_pow2_recip): New predicate

2019-08-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91403
	* tree-scalar-evolution.c (follow_ssa_edge_binary): Inline
	cases we can handle with tail-recursion...
	(follow_ssa_edge_expr): ... here.  Do so.

2019-08-19  Kito Cheng  <kito.cheng@sifive.com>

	PR target/91441
	* toplev.c (process_options): Check TARGET_ASAN_SHADOW_OFFSET is
	implemented for -fsanitize=kernel-address, and merge check logic
	with -fsanitize=address.

2019-08-18  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.h (TARGET_OS_CPP_BUILTINS): Add asserts
	for cpu and machine.  Factor 64/32b builtins.

2019-08-18  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/install.texi (Specific, bfin): blackfin.uclinux.org is
	gone, point to sourceforge.net.

2019-08-17  Gerald Pfeifer  <gerald@pfeifer.com>
	
	* doc/ux.texi (User Experience Guidelines): Update reference.

2019-08-17  Gerald Pfeifer  <gerald@pfeifer.com>
	
	* doc/include/gpl_v3.texi (Copying): Adjust the link to "Why
	not LGPL".

2019-08-16  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-sra.c (build_reconstructed_reference): Return NULL_TREE instead
	of NULL.  Add guard for broken VIEW_CONVERT_EXPRs.

2019-08-16  Martin Sebor  <msebor@redhat.com>

	* tree.def (TYPE_SIZE): Clarify.
	* tree.h (TYPE_SIZE, TYPE_SIZE_UNIT, DECL_SIZE): Add comments.

2019-08-16  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR tree-optimization/91109
	* lra-int.h (lra_need_for_scratch_reg_p): Declare.
	* lra.c (lra): Use lra_need_for_scratch_reg_p.
	* lra-spills.c (lra_need_for_scratch_reg_p): New function.

2019-08-16  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/mmx.md (mmxdoublemode): New mode attribute.
	(mmx_uavg<mode>3): Macroize expaner from mmx_uavgv8qi3 and
	mmx_uavgv4hi3 using MMXMODE12 mode iterator.
	(uavg<mode>3_ceil): New expander.
	* config/i386/sse.md (uavg<mode>3_ceil): Use ssedoublemode
	mode iterator when creating CONST1_RTX.
	(<sse2_avx2>_uavg<mode>3<mask_name>): Ditto.
	(*<sse2_avx2>_uavg<mode>3<mask_name>): Use ssedoublemode
	mode iterator for const1_operand predicate.

2019-08-16  Richard Biener  <rguenther@suse.de>

	* tree-scalar-evolution.c (follow_ssa_edge_expr): Declare.
	(follow_ssa_edge_binary): Call follow_ssa_edge_expr instead of
	follow_ssa_edge.
	(follow_ssa_edge_in_condition_phi_branch): Likewise.
	(analyze_evolution_in_loop): Likewise.
	(follow_ssa_edge, follow_ssa_edge_in_rhs): Inline into ...
	(follow_ssa_edge_expr): ... here.  Refactor code.

2019-08-16  Richard Biener  <rguenther@suse.de>

	PR target/91469
	* config/i386/i386-features.c
	(general_scalar_chain::replace_with_subreg): Stop at memory operands.

2019-08-16  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR other/91255
	* gensupport.c (has_subst_attribute): Error out on set_attr_alternative
	only if subst_name matches curr_attr string.

2019-08-16  Richard Biener  <rguenther@suse.de>

	* tree-ssa-forwprop.c (simplify_builtin_call): Do not remove
	stmt at gsi_p, instead replace it with a NOP removed later.
	(pass_forwprop::execute): Fully propagate lattice, DCE stmts
	that became dead because of that.

2019-08-16  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-ssa-evrp-analyze.c (record_ranges_from_phis): Skip PHIs
	for which we can't represent a range.
	* ipa-cp.c (ipcp_vr_lattice::set_to_bottom): Pass type to
	set_varying.
	* tree-ssa-threadedge.c (record_temporary_equivalences_from_phis):
	Set VR_UNDEFINED if type is not supported.
	* tree-ssanames.c (get_range_info): Pass type to set_varying.
	* tree-vrp.c (value_range_base::check): Assert that a varying has
	min/max set.
	(value_range_base::equal_p): Early bail for undefines.
	(value_range_base::set_varying): Accept a type.
	(value_range::set_varying): Same.
	(value_range_base::type): VARYING can have a type, while UNDEFINE
	is typeless.
	(value_range_base::dump): Print type for VARYING nodes.
	(value_range_base::set): Add type to VARYING.
	(extract_range_from_multiplicative_op): Pass type to set_varying.
	(extract_range_from_binary_expr): Same.
	(value_range_base::intersect_helper): Same.
	(value_range_base::union_helper): Same.
	(value_range_base::normalize_symbolics): Same.
	(determine_value_range_1): Same.
	* tree-vrp.h (class value_range_base): Add type to set_varying.
	Add prototype for dump(void).
	Add prototype for supports_type_p.
	(class value_range): Add type to set_varying.
	Add prototype for dump(void).
	* vr-values.c (set_value_range_to_truthvalue): Pass type to
	set_varying.
	(vr_values::get_lattice_entry): Set varying even if propagation
	finished.
	Pass type to set_varying.
	(vr_values::get_value_range): Remove vr_const_varying.
	Reallocate the lattice if needed.
	(vr_values::update_value_range): Pass type to set_varying.
	(vr_values::extract_range_for_var_from_comparison_expr): Same.
	(vr_values::extract_range_from_binary_expr): Same.
	(vr_values::extract_range_from_unary_expr): Same.
	(vr_values::extract_range_from_cond_expr): Same.
	(vr_values::check_for_binary_op_overflow): Same.
	(vr_values::extract_range_basic): Same.
	(vr_values::extract_range_from_assignment): Same.
	(vr_values::vr_values): Increase size of num_vr_values.
	(vr_values::extract_range_from_phi_node): Pass type to
	set_varying.

2019-08-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/90878
	* config/i386/i386.c (inline_memory_move_cost): Use hard_register
	for costs of hard register moves.
	(ix86_register_move_cost): Likewise.
	* config/i386/i386.h (processor_costs): Move costs of hard
	register moves to hard_register.  Add int_load, int_store,
	xmm_move, ymm_move, zmm_move, sse_to_integer, integer_to_sse,
	sse_load, sse_store, sse_unaligned_load and sse_unaligned_store
	for costs of RTL expressions.
	* config/i386/x86-tune-costs.h: Move costs of hard register
	moves to hard_register.  Duplicate int_load, int_store,
	xmm_move, ymm_move, zmm_move, sse_to_integer, integer_to_sse,
	sse_load, sse_store for costs of RTL expressions.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>

	* target.def (setup_incoming_vararg_bounds): Remove.
	* doc/tm.texi.in (TARGET_SETUP_INCOMING_VARARG_BOUNDS): Remove.
	* doc/tm.texi: Regenerate.
	* targhooks.c (default_setup_incoming_vararg_bounds): Delete.
	* targhooks.h (default_setup_incoming_vararg_bounds): Likewise.
	* config/i386/i386.c (ix86_setup_incoming_vararg_bounds): Likewise.
	(TARGET_SETUP_INCOMING_VARARG_BOUNDS): Likewise.

2019-08-15  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	MSP430: Fix lines over 80 characters long in
	config/msp430/*.{c,h} files

	* config/msp430/driver-msp430.c (msp430_select_cpu): Fix format
	specifier in string.
	(msp430_select_hwmult_lib): Split line more than 80 characters long.
	* config/msp430/msp430-devices.c (msp430_extract_mcu_data): Remove
	redundant old comment.
	* config/msp430/msp430-protos.h (msp430_output_aligned_decl_common):
	Split line more than 80 characters long.
	* config/msp430/msp430.c (msp430_option_override): Likewise.
	(msp430_return_in_memory): Likewise.
	(msp430_gimplify_va_arg_expr): Likewise.
	(TARGET_ADDR_SPACE_LEGITIMATE_ADDRESS_P): Likewise.
	(msp430_legitimate_constant): Likewise.
	(TARGET_ALLOCATE_STACK_SLOTS_FOR_ARGS): Likewise.
	(msp430_attr): Likewise.
	(msp430_data_attr): Likewise.
	(msp430_start_function): Likewise.
	(gen_prefix): Likewise.
	(msp430_init_sections): Likewise.
	(msp430_select_section): Likewise.
	(msp430_function_section): Likewise.
	(msp430_unique_section): Likewise.
	(msp430_output_aligned_decl_common): Likewise.
	(msp430_do_not_relax_short_jumps): Likewise.
	(msp430_init_builtins): Likewise.
	(msp430_expand_delay_cycles): Likewise.
	(msp430_expand_prologue): Likewise.
	(msp430_expand_epilogue): Likewise.
	(msp430_expand_helper): Likewise.
	(msp430_split_movsi): Likewise.
	(msp430_print_operand): Likewise.
	(msp430_return_addr_rtx): Likewise.
	(msp430x_extendhisi): Likewise.
	* config/msp430/msp430.h (STARTFILE_SPEC): Likewise.
	(ASM_SPEC): Likewise.
	Remove very obvious comments.
	(LIB_SPEC): Split line more than 80 characters long.
	(EH_RETURN_HANDLER_RTX): Likewise.
	(HARD_REGNO_CALLER_SAVE_MODE): Likewise.

2019-08-15  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	MSP430: Fix whitespace errors and incorrect indentation in
	config/msp430/*.{c,h} files

	* config/msp430/driver-msp430.c (msp430_select_cpu): Fix indentation.
	(msp430_select_hwmult_lib): Likewise.
	* config/msp430/msp430-devices.c (parse_devices_csv_1): Likewise.
	(msp430_extract_mcu_data): Likewise.
	(struct t_msp430_mcu_data): Likewise.
	* config/msp430/msp430.c (struct machine_function): Remove whitespace
	before left square bracket.
	(msp430_option_override): Fix indentation.
	(msp430_hard_regno_nregs_with_padding): Likewise.
	(msp430_initial_elimination_offset): Likewise.
	(msp430_special_register_convention_p): Remove whitespace before left
	square bracket and after exclamation mark.
	(msp430_evaluate_arg): Likewise.
	(msp430_callee_copies): Fix indentation.
	(msp430_gimplify_va_arg_expr): Likewise.
	(msp430_function_arg_advance): Remove whitespace before left square
	bracket.
	(reg_ok_for_addr): Likewise.
	(msp430_preserve_reg_p): Likewise.
	(msp430_compute_frame_info): Likewise.
	(msp430_asm_output_addr_const_extra): Add space between function name
	and open parenthesis.
	(has_section_name): Fix indentation.
	(msp430_attr): Remove trailing whitespace.
	(msp430_section_attr): Likewise.
	(msp430_data_attr): Likewise.
	(struct msp430_attribute_table): Fix comment and whitespace.
	(msp430_start_function): Remove whitespace before left square bracket.
	Add space between function name and open parenthesis.
	(msp430_select_section): Remove trailing whitespace.
	(msp430_section_type_flags): Remove trailing whitespace.
	(msp430_unique_section): Remove space before closing parenthesis.
	(msp430_output_aligned_decl_common): Change 8 spaces to a tab.
	(msp430_builtins): Remove whitespace before left square bracket.
	(msp430_init_builtins):	Fix indentation.
	(msp430_expand_prologue): Remove whitespace before left square bracket.
	Remove space before closing parenthesis.
	(msp430_expand_epilogue): Remove whitespace before left square bracket.
	(msp430_split_movsi): Remove space before closing parenthesis.
	(helper_function_name_mappings): Fix indentation.
	(msp430_use_f5_series_hwmult): Fix whitespace.
	(use_32bit_hwmult): Likewise.
	(msp430_no_hwmult): Likewise.
	(msp430_output_labelref): Remove whitespace before left square bracket.
	(msp430_print_operand_raw): Likewise.
	(msp430_print_operand_addr): Likewise.
	(msp430_print_operand): Add two spaces after '.' in comment.
	Fix trailing whitespace.
	(msp430x_extendhisi): Fix indentation.
	* config/msp430/msp430.h (TARGET_CPU_CPP_BUILTINS): Change 8 spaces to
	tab.
	(PC_REGNUM): Likewise.
	(STACK_POINTER_REGNUM): Likewise.
	(CC_REGNUM): Likewise.

2019-08-15  Richard Biener  <rguenther@suse.de>

	PR target/91454
	* config/i386/i386-features.c (gen_gpr_to_xmm_move_src): New
	helper.
	(general_scalar_chain::make_vector_copies): Use it.

2019-08-15  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* function.c (assign_parm_setup_reg): Handle misaligned stack arguments.

2019-08-15  Martin Liska  <mliska@suse.cz>

	* tree-ssa-dce.c (propagate_necessity): We can't reach now
	operators with no arguments.
	(eliminate_unnecessary_stmts): Likewise here.

2019-08-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-features.c (general_scalar_chain::convert_insn)
	<case COMPARE>: Revert 2019-08-14 change.
	(convertible_comparison_p): Revert 2019-08-14 change.  Return false
	for (TARGET_64BIT || mode != DImode).

2019-08-15  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (value_range_base::set): Merge in code from
	value_range_base::set_and_canonicalize.
	Enforce canonicalization at set time.
	Normalize [MIN, MAX] into VARYING and ~[MIN, MAX] into UNDEFINED.
	(value_range_base::set_undefined): Inline call to set().
	(value_range_base::set_varying): Same.
	(value_range_base::singleton_p): Handle VR_ANTI_RANGEs.
	(vrp_val_max): New argument handle_pointers.
	(vrp_val_min): Same.
	(ranges_from_anti_range): Same.
	(extract_range_into_wide_ints): Use tree argument instead of sign
	and precision.
	(extract_range_from_multiplicative_op): Take in tree type instead
	of precision and sign.  Adapt function for canonicalized ranges.
	(extract_range_from_binary_expr): Pass type to
	extract_range_from_multiplicative_op.
	Adapt for canonicalized ranges.
	(extract_range_from_unary_expr): Same.
	(value_range_base::intersect_helper): Adjust for canonicalized
	ranges.
	(value_range_base::union_helper): Same.
	(value_range_base::normalize_symbolics): New.
	* tree-vrp.h (class value_range_base): Remove
	set_and_canonicalize.
	New prototype for normalize_symbolics.
	(class value_range): Remove set_and_canonicalize.
	(vrp_val_min): Adjust prototype.
	(vrp_val_max): Same.
	* vr-values.c
	(vr_values::extract_range_for_var_from_comparison_expr):  Call set
	instead of set_and_canonicalize.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/91444
	* tree-vect-stmts.c (vectorizable_call): Check that the function
	is a BUILT_IN_MD function before passing it to
	targetm.vectorize.builtin_md_vectorized_function.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_sve_mode_p): Declare.
	* config/aarch64/aarch64.c (aarch64_sve_mode_p): New function.
	(aarch64_select_early_remat_modes): Use it.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_simd_vector_alignment): Return
	16 for SVE predicates even if they are fixed-length.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (and<PRED_ALL:mode>3): Make the
	operand order match the MOV /Z alias.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_output_sve_cnt_immediate): Take
	the vector pattern as an aarch64_svpattern argument.  Update the
	overloaded caller accordingly.
	(aarch64_output_sve_scalar_inc_dec): Update call accordingly.
	(aarch64_output_sve_vector_inc_dec): Likewise.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_add_offset): In the fallback
	multiplication case, try to compute VG * (lowest set bit) directly
	rather than always basing the multiplication on VG.  Use
	expand_mult for the multiplication if we can.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h
	(aarch64_sve_scalar_inc_dec_immediate_p): Declare.
	(aarch64_sve_inc_dec_immediate_p): Rename to...
	(aarch64_sve_vector_inc_dec_immediate_p): ...this.
	(aarch64_output_sve_addvl_addpl): Take a single rtx argument.
	(aarch64_output_sve_scalar_inc_dec): Declare.
	(aarch64_output_sve_inc_dec_immediate): Rename to...
	(aarch64_output_sve_vector_inc_dec): ...this.
	* config/aarch64/aarch64.c (aarch64_sve_scalar_inc_dec_immediate_p)
	(aarch64_output_sve_scalar_inc_dec): New functions.
	(aarch64_output_sve_addvl_addpl): Remove the base and offset
	arguments.  Only handle true ADDVL and ADDPL instructions;
	don't emit an INC or DEC.
	(aarch64_sve_inc_dec_immediate_p): Rename to...
	(aarch64_sve_vector_inc_dec_immediate_p): ...this.
	(aarch64_output_sve_inc_dec_immediate): Rename to...
	(aarch64_output_sve_vector_inc_dec): ...this.  Update call to
	aarch64_sve_vector_inc_dec_immediate_p.
	* config/aarch64/predicates.md (aarch64_sve_scalar_inc_dec_immediate)
	(aarch64_sve_plus_immediate): New predicates.
	(aarch64_pluslong_operand): Accept aarch64_sve_plus_immediate
	rather than aarch64_sve_addvl_addpl_immediate.
	(aarch64_sve_inc_dec_immediate): Rename to...
	(aarch64_sve_vector_inc_dec_immediate): ...this.  Update call to
	aarch64_sve_vector_inc_dec_immediate_p.
	(aarch64_sve_add_operand): Update accordingly.
	* config/aarch64/constraints.md (Uai): New constraint.
	(vsi): Update call to aarch64_sve_vector_inc_dec_immediate_p.
	* config/aarch64/aarch64.md (add<GPI:mode>3): Don't force the second
	operand into a register if it satisfies aarch64_sve_plus_immediate.
	(*add<GPI:mode>3_aarch64, *add<GPI:mode>3_poly_1): Add an alternative
	for Uai.  Update calls to aarch64_output_sve_addvl_addpl.
	* config/aarch64/aarch64-sve.md (add<mode>3): Call
	aarch64_output_sve_vector_inc_dec instead of
	aarch64_output_sve_inc_dec_immediate.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (UNSPEC_REVB, UNSPEC_REVH)
	(UNSPEC_REVW): New constants.
	(elem_bits): New mode attribute.
	(SVE_INT_UNARY): New int iterator.
	(optab): Handle UNSPEC_REV[BHW].
	(sve_int_op): New int attribute.
	(min_elem_bits): Handle VNx16QI and the predicate modes.
	* config/aarch64/aarch64-sve.md (*aarch64_sve_rev64<mode>)
	(*aarch64_sve_rev32<mode>, *aarch64_sve_rev16vnx16qi): Delete.
	(@aarch64_pred_<SVE_INT_UNARY:optab><SVE_I:mode>): New pattern.
	* config/aarch64/aarch64.c (aarch64_sve_data_mode): New function.
	(aarch64_sve_int_mode, aarch64_sve_rev_unspec): Likewise.
	(aarch64_split_sve_subreg_move): Use UNSPEC_REV[BHW] instead of
	unspecs based on the total width of the reversed data.
	(aarch64_evpc_rev_local): Likewise (for SVE only).  Use a
	reinterpret followed by a subreg on big-endian targets.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64-sve.md
	(*cond_<SVE_COND_FP_TERNARY:optab><SVE_F:mode>_any): Add /z
	alternatives in which one of the inputs is in the same register
	as the output.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (*vec_extract<mode><Vel>_ext)
	(*aarch64_sve_ext<mode>): Add MOVPRFX alternatives.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (*sub<SVE_F:mode>3): Remove immediate
	FADD and FSUB alternatives.  Add a MOVPRFX alternative for FSUBR.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64-sve.md (add<SVE_I:mode>3, sub<SVE_I:mode>3)
	(<LOGICAL:optab><SVE_I:mode>3, *add<SVE_F:mode>3, *mul<SVE_F:mode>3)
	(*fabd<SVE_F:mode>3): Add more MOVPRFX alternatives.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>
	    Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	* config/aarch64/aarch64-sve.md (*v<ASHIFT:optab><SVE_I:mode>3):
	Add an alternative that uses reversed shifts.

2019-08-15  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-cores.def (cortex-a76): Use neoversen1 tuning
	struct.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (aarch64_<su>abd<mode>_3): Add
	a commutativity marker.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64-protos.h (aarch64_prepare_sve_int_fma)
	(aarch64_prepare_sve_cond_int_fma): Declare.
	* config/aarch64/aarch64.c (aarch64_convert_mult_to_shift)
	(aarch64_prepare_sve_int_fma): New functions.
	(aarch64_prepare_sve_cond_int_fma): Likewise.
	* config/aarch64/aarch64-sve.md
	(cond_<SVE_INT_BINARY:optab><SVE_I:mode>): Add a "@" marker.
	(fma<SVE_I:mode>4, cond_fma<SVE_I:mode>, *cond_fma<SVE_I:mode>_2)
	(*cond_fma<SVE_I:mode>_4, *cond_fma<SVE_I:mode>_any, fnma<SVE_I:mode>4)
	(cond_fnma<SVE_I:mode>, *cond_fnma<SVE_I:mode>_2)
	(*cond_fnma<SVE_I:mode>_4, *cond_fnma<SVE_I:mode>_any): New patterns.
	(*madd<mode>): Rename to...
	(*fma<mode>4): ...this.
	(*msub<mode>): Rename to...
	(*fnma<mode>4): ...this.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64.c (aarch64_print_vector_float_operand):
	Print 2.0 naturally.
	(aarch64_sve_float_mul_immediate_p): Return true for 2.0.
	* config/aarch64/predicates.md
	(aarch64_sve_float_negated_arith_immediate): New predicate,
	renamed from aarch64_sve_float_arith_with_sub_immediate.
	(aarch64_sve_float_arith_with_sub_immediate): Test for both
	positive and negative constants.
	(aarch64_sve_float_arith_with_sub_operand): Redefine as a register
	or an aarch64_sve_float_arith_with_sub_immediate.
	* config/aarch64/constraints.md (vsN): Use
	aarch64_sve_float_negated_arith_immediate.
	* config/aarch64/iterators.md (SVE_COND_FP_BINARY_I1): New int
	iterator.
	(sve_pred_fp_rhs2_immediate): New int attribute.
	* config/aarch64/aarch64-sve.md
	(cond_<SVE_COND_FP_BINARY:optab><SVE_F:mode>): Use
	sve_pred_fp_rhs1_operand and sve_pred_fp_rhs2_operand.
	(*cond_<SVE_COND_FP_BINARY_I1:optab><SVE_F:mode>_2_const)
	(*cond_<SVE_COND_FP_BINARY_I1:optab><SVE_F:mode>_any_const)
	(*cond_add<SVE_F:mode>_2_const, *cond_add<SVE_F:mode>_any_const)
	(*cond_sub<mode>_3_const, *cond_sub<mode>_any_const): New patterns.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64-sve.md (*aarch64_cond_abd<SVE_F:mode>_2)
	(*aarch64_cond_abd<SVE_F:mode>_3)
	(*aarch64_cond_abd<SVE_F:mode>_any): New patterns.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64-sve.md (*aarch64_cond_<su>abd<mode>_2)
	(*aarch64_cond_<su>abd<mode>_any): New patterns.

2019-08-15  Richard Sandiford  <richard.sandiford@arm.com>
	    Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	* internal-fn.def (IFN_COND_SHL, IFN_COND_SHR): New internal functions.
	* internal-fn.c (FOR_EACH_CODE_MAPPING): Handle shifts.
	* match.pd (UNCOND_BINARY, COND_BINARY): Likewise.
	* optabs.def (cond_ashl_optab, cond_ashr_optab, cond_lshr_optab): New
	optabs.
	* optabs.h (create_convert_operand_from): Expand comment.
	* optabs.c (maybe_legitimize_operand): Allow implicit broadcasts
	when mapping scalar rtxes to vector operands.
	* config/aarch64/iterators.md (SVE_INT_BINARY): Add ashift,
	ashiftrt and lshiftrt.
	(sve_int_op, sve_int_op_rev, sve_pred_int_rhs2_operand): Handle them.
	* config/aarch64/aarch64-sve.md (*cond_<optab><mode>_2_const)
	(*cond_<optab><mode>_any_const): New patterns.

2019-08-15  Martin Liska  <mliska@suse.cz>

	PR ipa/91438
	* cgraph.c (cgraph_node::remove): When setting
	n->origin = NULL for all nested functions, reset
	also next_nested.

2019-08-15  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::verify_node): Verify origin, nested
	and next_nested.

2019-08-15  Martin Liska  <mliska@suse.cz>

	PR ipa/91404
	* passes.c (order): Remove.
	(uid_hash_t): Likewise).
	(remove_cgraph_node_from_order): Remove from set
	of pointers (cgraph_node *).
	(insert_cgraph_node_to_order): New.
	(duplicate_cgraph_node_to_order): New.
	(do_per_function_toporder): Register all 3 cgraph hooks.
	Skip removed_nodes now as we know about all of them.

2019-08-14  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.c (ix86_expand_vector_init_one_nonzero)
	<case E_V8QImode>: Use vector_set path for
	TARGET_MMX_WITH_SSE && TARGET_SSE4_1.
	(ix86_expand_vector_init_one_var) <case E_V8QImode>:
	Do not widen for TARGET_MMX_WITH_SSE && TARGET_SSE4_1.

2019-08-14  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* builtins.c (expand_builtin_init_descriptor): Set memory alignment.

2019-08-14  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/91294
	* tree-ssa-strlen.c (handle_store): Avoid treating lower bound of
	source length as exact.

2019-08-14  Christophe Lyon  <christophe.lyon@linaro.org>

	* doc/extend.texi: Add "noinit" attribute documentation.
	* doc/sourcebuild.texi: Add noinit effective target documentation.
	* varasm.c (default_section_type_flags): Add support for "noinit"
	section.
	(default_elf_select_section): Add support for "noinit" attribute.
	* config/msp430/msp430.c (msp430_attribute_table): Remove
	"noinit" entry.

2019-08-14  Richard Biener  <rguenther@suse.de>
	    Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91154
	* config/i386/i386-features.h (scalar_chain::scalar_chain): Add
	mode arguments.
	(scalar_chain::smode): New member.
	(scalar_chain::vmode): Likewise.
	(dimode_scalar_chain): Rename to...
	(general_scalar_chain): ... this.
	(general_scalar_chain::general_scalar_chain): Take mode arguments.
	(timode_scalar_chain::timode_scalar_chain): Initialize scalar_chain
	base with TImode and V1TImode.
	* config/i386/i386-features.c (scalar_chain::scalar_chain): Adjust.
	(general_scalar_chain::vector_const_cost): Adjust for SImode
	chains.
	(general_scalar_chain::compute_convert_gain): Likewise.  Add
	{S,U}{MIN,MAX} support.
	(general_scalar_chain::replace_with_subreg): Use vmode/smode.
	(general_scalar_chain::make_vector_copies): Likewise.  Handle
	non-DImode chains appropriately.
	(general_scalar_chain::convert_reg): Likewise.
	(general_scalar_chain::convert_op): Likewise.
	(general_scalar_chain::convert_insn): Likewise.  Add
	fatal_insn_not_found if the result is not recognized.
	(convertible_comparison_p): Pass in the scalar mode and use that.
	(general_scalar_to_vector_candidate_p): Likewise.  Rename from
	dimode_scalar_to_vector_candidate_p.  Add {S,U}{MIN,MAX} support.
	(scalar_to_vector_candidate_p): Remove by inlining into single
	caller.
	(general_remove_non_convertible_regs): Rename from
	dimode_remove_non_convertible_regs.
	(remove_non_convertible_regs): Remove by inlining into single caller.
	(convert_scalars_to_vector): Handle SImode and DImode chains
	in addition to TImode chains.
	* config/i386/i386.md (<maxmin><MAXMIN_IMODE>3): New expander.
	(*<maxmin><MAXMIN_IMODE>3_1): New insn-and-split.
	(*<maxmin>di3_doubleword): Likewise.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64-sve.md (*cond_bic<mode>_2)
	(*cond_bic<mode>_any): New patterns.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_print_operand): Allow %e to
	take the equivalent mask, as well as a bit count.
	* config/aarch64/predicates.md (aarch64_sve_uxtb_immediate)
	(aarch64_sve_uxth_immediate, aarch64_sve_uxt_immediate)
	(aarch64_sve_pred_and_operand): New predicates.
	* config/aarch64/iterators.md (sve_pred_int_rhs2_operand): New
	code attribute.
	* config/aarch64/aarch64-sve.md
	(cond_<SVE_INT_BINARY:optab><SVE_I:mode>): Use it.
	(*cond_uxt<mode>_2, *cond_uxt<mode>_any): New patterns.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md
	(*cond_<SVE_COND_FCVTI:optab>_nontrunc<SVE_F:mode><SVE_HSDI:mode>)
	(*cond_<SVE_COND_ICVTF:optab>_nonextend<SVE_HSDI:mode><SVE_F:mode>):
	New patterns.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64-sve.md
	(*cond_<SVE_COND_FP_UNARY:optab><SVE_F:mode>_2): New pattern.
	(*cond_<SVE_COND_FP_UNARY:optab><SVE_F:mode>_any): Likewise.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64-sve.md
	(*cond_<SVE_INT_UNARY:optab><SVE_I:mode>_2): New pattern.
	(*cond_<SVE_INT_UNARY:optab><SVE_I:mode>_any): Likewise.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SVE_COND_FP_ABS_CMP): New iterator.
	* config/aarch64/aarch64-sve.md (*aarch64_pred_fac<cmp_op><mode>):
	New pattern.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64-sve.md (*aarch64_sel_dup<mode>): New pattern.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64.c (aarch64_bit_representation): New function.
	(aarch64_print_vector_float_operand): Also handle 8-bit floats.
	(aarch64_print_operand): Add support for %I.
	(aarch64_sve_dup_immediate_p): Handle scalars as well as vectors.
	Bitcast floating-point constants to the corresponding integer constant.
	(aarch64_float_const_representable_p): Handle vectors as well
	as scalars.
	(aarch64_expand_sve_vcond): Make sure that the operands are valid
	for the new vcond_mask_<mode><vpred> expander.
	* config/aarch64/predicates.md (aarch64_sve_dup_immediate): Also
	test aarch64_float_const_representable_p.
	(aarch64_sve_reg_or_dup_imm): New predicate.
	* config/aarch64/aarch64-sve.md (vec_extract<vpred><Vel>): Use
	gen_vcond_mask_<mode><vpred> instead of
	gen_aarch64_sve_dup<mode>_const.
	(vcond_mask_<mode><vpred>): Turn into a define_expand that
	accepts aarch64_sve_reg_or_dup_imm and aarch64_simd_reg_or_zero
	for operands 1 and 2 respectively.  Force operand 2 into a
	register if operand 1 is a register.  Fold old define_insn...
	(aarch64_sve_dup<mode>_const): ...and this define_insn...
	(*vcond_mask_<mode><vpred>): ...into this new pattern.  Handle
	floating-point constants that can be moved as integers.  Add
	alternatives for MOV /M and FMOV /M.
	(vcond<mode><v_int_equiv>, vcondu<mode><v_int_equiv>)
	(vcond<mode><v_fp_equiv>): Accept nonmemory_operand for operands
	1 and 2 respectively.
	* config/aarch64/constraints.md (Ufc): Handle vectors as well
	as scalars.
	(vss): New constraint.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/predicates.md (aarch64_sve_float_maxmin_immediate)
	(aarch64_sve_float_maxmin_operand): New predicates.
	* config/aarch64/constraints.md (vsB): New constraint.
	(vsM): Fix typo.
	* config/aarch64/iterators.md (sve_pred_fp_rhs2_operand): Use
	aarch64_sve_float_maxmin_operand for UNSPEC_COND_FMAXNM and
	UNSPEC_COND_FMINNM.
	* config/aarch64/aarch64-sve.md (<maxmin_uns><SVE_F:mode>3):
	Use aarch64_sve_float_maxmin_operand for operand 2.
	(*<SVE_COND_FP_MAXMIN_PUBLIC:optab><SVE_F:mode>3): Likewise.
	Add alternatives for the constant forms.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/constraints.md (vsb): New constraint.
	(vsm): Generalize description.
	* config/aarch64/iterators.md (SVE_INT_BINARY_IMM): New code
	iterator.
	(sve_imm_con): Handle smax, smin, umax and umin.
	(sve_imm_prefix): New code attribute.
	* config/aarch64/predicates.md (aarch64_sve_vsb_immediate)
	(aarch64_sve_vsb_operand): New predicates.
	(aarch64_sve_mul_immediate): Rename to...
	(aarch64_sve_vsm_immediate): ...this.
	(aarch64_sve_mul_operand): Rename to...
	(aarch64_sve_vsm_operand): ...this.
	* config/aarch64/aarch64-sve.md (mul<mode>3): Generalize to...
	(<SVE_INT_BINARY_IMM:optab><SVE_I:mode>3): ...this.
	(*mul<mode>3, *post_ra_mul<mode>3): Generalize to...
	(*<SVE_INT_BINARY_IMM:optab><SVE_I:mode>3)
	(*post_ra_<SVE_INT_BINARY_IMM:optab><SVE_I:mode>3): ...these and
	add movprfx support for the immediate alternatives.
	(<su><maxmin><mode>3, *<su><maxmin><mode>3): Delete in favor
	of the above.
	(*<SVE_INT_BINARY_SD:optab><SVE_SDI:mode>3): Fix incorrect predicate
	for operand 3.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/predicates.md (aarch64_simd_imm_one): New predicate.
	* config/aarch64/aarch64-sve.md (*cnot<mode>): New pattern.
	(*cond_cnot<mode>_2, *cond_cnot<mode>_any): Likewise.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SVE_INT_UNARY): Add clrsb and clz.
	(optab, sve_int_op): Handle them.
	* config/aarch64/aarch64-sve.md: Expand comment.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/predicates.md (const_1_to_3_operand): New predicate.
	* config/aarch64/aarch64-sve.md (*aarch64_adr_uxtw)
	(*aarch64_adr<mode>_shift, *aarch64_adr_shift_uxtw): New patterns.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_expand_sve_const_pred_eor)
	(aarch64_expand_sve_const_pred_trn): New functions.
	(aarch64_expand_sve_const_pred_1): Add a recurse_p parameter and
	use the above functions when the parameter is true.
	(aarch64_expand_sve_const_pred): Update call accordingly.
	* config/aarch64/aarch64-sve.md (*aarch64_sve_<perm_insn><mode>):
	Rename to...
	(@aarch64_sve_<perm_insn><mode>): ...this.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_sve_same_pred_for_ptest_p):
	Declare.
	* config/aarch64/aarch64.c (aarch64_sve_same_pred_for_ptest_p)
	(aarch64_sve_emit_int_cmp): New functions.
	(aarch64_convert_sve_data_to_pred): Use aarch64_sve_emit_int_cmp.
	(aarch64_sve_cmp_operand_p, aarch64_emit_sve_ptrue_op_cc): Delete.
	(aarch64_expand_sve_vec_cmp_int): Use aarch64_sve_emit_int_cmp.
	* config/aarch64/aarch64.md (UNSPEC_MERGE_PTRUE): Delete.
	(UNSPEC_PRED_Z): New unspec.
	(set_clobber_cc_nzc): Delete.
	* config/aarch64/aarch64-sve.md: Add a block comment about
	UNSPEC_PRED_Z.
	(*cmp<SVE_INT_CMP:cmp_op><mode>): Rename to...
	(@aarch64_pred_cmp<SVE_INT_CMP:cmp_op><mode>): ...this, replacing
	the old pattern with that name.  Use UNSPEC_PRED_Z instead of
	UNSPEC_MERGE_PTRUE.
	(*cmp<SVE_INT_CMP:cmp_op><mode>_cc): Use UNSPEC_PRED_Z instead of
	UNSPEC_MERGE_PTRUE.  Use aarch64_sve_same_pred_for_ptest_p to
	check for compatible predicates.
	(*cmp<cmp_op><SVE_INT_CMP:mode>_ptest): Likewise.
	(*cmp<cmp_op><mode>_and): Match a known-ptrue UNSPEC_PRED_Z instead
	of UNSPEC_MERGE_PTRUE.  Split into the new form of predicated
	comparisons above.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.md (UNSPEC_PRED_X): New unspec.
	* config/aarch64/aarch64-sve.md: Add a section describing it.
	(@aarch64_pred_mov<mode>, @aarch64_pred_mov<mode>)
	(<SVE_INT_UNARY:optab><mode>2, *<SVE_INT_UNARY:optab><mode>2)
	(aarch64_<su>abd<mode>_3, mul<SVE_I:mode>3, *mul<SVE_I:mode>3)
	(<su>mul<mode>3_highpart, *<su>mul<mode>3_highpart)
	(<SVE_INT_BINARY:optab><mode>3, *<SVE_INT_BINARY:optab><mode>3)
	(*bic<mode>3, v<ASHIFT:optab><mode>3, *v<ASHIFT:optab><mode>3)
	(<su><maxmin><mode>3, *<su><maxmin><mode>3, *madd<SVE_I:mode>)
	(*msub<SVE_I:mode>3, *aarch64_sve_rev64<mode>)
	(*aarch64_sve_rev32<mode>, *aarch64_sve_rev16vnx16qi): Use
	UNSPEC_PRED_X instead of UNSPEC_MERGE_PTRUE.
	* config/aarch64/aarch64-sve2.md (<u>avg<mode>3_floor)
	(<u>avg<mode>3_ceil, *<sur>h<addsub><mode>): Likewise.
	* config/aarch64/aarch64.c (aarch64_split_sve_subreg_move)
	(aarch64_evpc_rev_local): Update accordingly.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (VNx4SI_ONLY, VNx2DF_ONLY): New mode
	iterators.
	(SVE_BHSI, SVE_SDI): Tweak comment.
	(SVE_HSDI): Likewise.  Fix definition.
	(SVE_SDF): New mode iterator.
	(elem_bits): New mode attribute.
	(SVE_COND_FCVT): New int iterator.
	* config/aarch64/aarch64-sve.md
	(*<SVE_COND_ICVTF:optab>v16hsf<SVE_HSDI:mode>2)
	(*<SVE_COND_ICVTF:optab>vnx4sf<SVE_SDI:mode>2)
	(*<SVE_COND_ICVTF:optab>vnx2df<SVE_SDI:mode>2): Merge into...
	(*aarch64_sve_<SVE_COND_ICVTF:optab>_nontrunc<SVE_F:mode><SVE_HSDI:mode>)
	(*aarch64_sve_<SVE_COND_ICVTF:optab>_trunc<VNx2DF_ONLY:mode><VNx4SI_ONLY:mode>):
	...these new patterns.
	(*<SVE_COND_FCVTI:optab><SVE_HSDI:mode>vnx8hf2)
	(*<SVE_COND_FCVTI:optab><SVE_SDI:mode>vnx4sf2)
	(aarch64_sve_<SVE_COND_FCVTI:optab><SVE_SDI:mode>vnx2df2):
	Merge into...
	(*aarch64_sve_<SVE_COND_FCVTI:optab>_nonextend<SVE_HSDI:mode><SVE_F:mode>)
	(aarch64_sve_<SVE_COND_FCVTI:optab>_extend<VNx4SI_ONLY:mode><VNx2DF_ONLY:mode>):
	...these new patterns.
	(vec_unpack<su_optab>_float_<perm_hilo>_vnx4si): Update accordingly.
	(*trunc<Vwide><SVE_SDF:mode>2): Replace with...
	(*aarch64_sve_<SVE_COND_FCVT:optab>_trunc<SVE_SDF:mode><SVE_HSF:mode>):
	...this new pattern.
	(aarch64_sve_extend<SVE_HSDF:mode><Vwide>2): Replace with...
	(aarch64_sve_<SVE_COND_FCVT:optab>_nontrunc<SVE_HSF:mode><SVE_SDF:mode>):
	...this new pattern.
	(vec_unpacks_<perm_hilo>_<mode>): Update accordingly.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.md (UNSPEC_FLOAT_CONVERT): Delete.
	* config/aarch64/iterators.md (UNSPEC_COND_FCVT, UNSPEC_COND_FCVTZS)
	(UNSPEC_COND_FCVTZU, UNSPEC_COND_SCVTF, UNSPEC_COND_UCVTF): New
	unspecs.
	(optab, su): Handle them.
	(SVE_COND_FCVTI, SVE_COND_ICVTF): New int iterators.
	* config/aarch64/aarch64-sve.md
	(<fix_trunc_optab><SVE_F:mode><v_int_equiv>2): Replace with...
	(<SVE_COND_FCVTI:optab><SVE_F:mode><v_int_equiv>2): ...this.
	(*<fix_trunc_optab>v16hsf<:SVE_HSDImode>2): Replace with...
	(*<SVE_COND_FCVTI:optab>v16hsf<SVE_F:mode>2): ...this.
	(*<fix_trunc_optab>vnx4sf<SVE_SDI:mode>2): Replace with...
	(*<SVE_COND_FCVTI:optab>vnx4sf<SVE_SDI:mode>2): ...this.
	(*<fix_trunc_optab>vnx2df<SVE_SDI:mode>2): Replace with...
	(*<SVE_COND_FCVTI:optab>vnx2df<SVE_SDI:mode>2): ...this.
	(vec_pack_<su>fix_trunc_vnx2df): Use SVE_COND_FCVTI instead of
	FIXUORS.
	(<FLOATUORS:optab><v_int_equiv><SVE_F:mode>2): Replace with...
	(<SVE_COND_ICVTF:optab><v_int_equiv><SVE_F:mode>2): ...this.
	(*<FLOATUORS:optab><SVE_HSDI:mode>vnx8hf2): Replace with...
	(*<SVE_COND_ICVTF:optab><SVE_HSDI:mode>vnx8hf2): ...this.
	(*<FLOATUORS:optab><SVE_SDI:mode>vnx4sf2): Replace with...
	(*<SVE_COND_ICVTF:optab><SVE_SDI:mode>vnx4sf2): ...this.
	(aarch64_sve_<FLOATUORS:optab><SVE_SDI:mode>vnx2df2): Replace with...
	(aarch64_sve_<SVE_COND_ICVTF:optab><SVE_SDI:mode>vnx2df2): ...this.
	(vec_unpack<su_optab>_float_<perm_hilo>_vnx4si): Pass a GP strictness
	operand to aarch64_sve_<SVE_COND_ICVTF:optab><SVE_SDI:mode>vnx2df2.
	(vec_pack_trunc_<SVE_HSF:Vwide>, *trunc<Vwide><SVE_HSF:mode>2)
	(aarch64_sve_extend<mode><Vwide>2): Use UNSPEC_COND_FCVT instead
	of UNSPEC_FLOAT_CONVERT.
	(vec_unpacks_<perm_hilo>_<mode>): Pass a GP strictness operand to
	aarch64_sve_extend<mode><Vwide>2.

2019-08-14  Richard Biener  <rguenther@suse.de>

	PR target/91154
	* config/i386/i386-features.c
	(dimode_scalar_chain::compute_convert_gain): Compute and dump
	individual instruction gain.  Fix reg-reg copy GRP cost.  Use
	ix86_cost->sse_op for vector instruction costs.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (UNSPEC_COND_FCMUO): New unspec.
	(cmp_op): Handle it.
	(SVE_COND_FP_CMP): Rename to...
	(SVE_COND_FP_CMP_I0): ...this.
	(SVE_FP_CMP): Remove.
	* config/aarch64/aarch64-sve.md
	(*fcm<SVE_FP_CMP:cmp_op><SVE_F:mode>): Replace with...
	(*fcm<SVE_COND_FP_CMP_I0:cmp_op><SVE_F:mode>): ...this new pattern,
	using unspecs to represent the comparison.
	(*fcmuo<SVE_F:mode>): Use UNSPEC_COND_FCMUO.
	(*fcm<cmp_op><mode>_and_combine, *fcmuo<mode>_and_combine): Update
	accordingly.
	* config/aarch64/aarch64.c (aarch64_emit_sve_ptrue_op): Delete.
	(aarch64_unspec_cond_code): Move after integer code.  Handle
	UNORDERED.
	(aarch64_emit_sve_predicated_cond): Replace with...
	(aarch64_emit_sve_fp_cond): ...this new function.
	(aarch64_emit_sve_or_conds): Replace with...
	(aarch64_emit_sve_or_fp_conds): ...this new function.
	(aarch64_emit_sve_inverted_cond): Replace with...
	(aarch64_emit_sve_invert_fp_cond): ...this new function.
	(aarch64_expand_sve_vec_cmp_float): Update accordingly.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SVE_HSD): New mode iterator.
	(V_FP_EQUIV, v_fp_equiv): Handle VNx8HI and VNx8HF.
	* config/aarch64/aarch64-sve.md (vcond<mode><v_fp_equiv>): Use
	SVE_HSD instead of SVE_SD.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/iterators.md (SVE_COND_FP_BINARY_REG): New int
	iterator.
	(sve_pred_fp_rhs1_operand, sve_pred_fp_rhs1_operand): New int
	attributes.
	* config/aarch64/aarch64-sve.md (add<SVE_F:mode>3, sub<SVE_F:mode>3)
	(mul<SVE_F:mode>3, div<SVE_F:mode>3)
	(<SVE_COND_FP_MAXMIN_PUBLIC:optab><SVE_F:mode>3): Merge into...
	(<SVE_COND_FP_BINARY:optab><SVE_F:mode>3): ...this new expander.
	(*div<SVE_F:mode>3): Generalize to...
	(*<SVE_COND_FP_BINARY:optab><SVE_F:mode>3): ...this.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64.md (SVE_RELAXED_GP, SVE_STRICT_GP): New
	constants.
	* config/aarch64/predicates.md (aarch64_sve_gp_strictness): New
	predicate.
	* config/aarch64/aarch64-protos.h (aarch64_sve_pred_dominates_p):
	Declare.
	* config/aarch64/aarch64.c (aarch64_sve_pred_dominates_p): New
	function.
	* config/aarch64/aarch64-sve.md: Add a block comment about the
	handling of predicated FP operations.
	(<SVE_COND_FP_UNARY:optab><SVE_F:mode>2, add<SVE_F:mode>3)
	(sub<SVE_F:mode>3, mul<SVE_F:mode>3, div<SVE_F:mode>3)
	(<SVE_COND_FP_MAXMIN_PUBLIC:optab><SVE_F:mode>3)
	(<SVE_COND_FP_MAXMIN_PUBLIC:maxmin_uns><SVE_F:mode>3)
	(<SVE_COND_FP_TERNARY:optab><SVE_F:mode>4): Add an SVE_RELAXED_GP
	operand.
	(cond_<SVE_COND_FP_BINARY:optab><SVE_F:mode>)
	(cond_<SVE_COND_FP_TERNARY:optab><SVE_F:mode>): Add an SVE_STRICT_GP
	operand.
	(*<SVE_COND_FP_UNARY:optab><SVE_F:mode>2)
	(*cond_<SVE_COND_FP_BINARY:optab><SVE_F:mode>_2)
	(*cond_<SVE_COND_FP_BINARY:optab><SVE_F:mode>_3)
	(*cond_<SVE_COND_FP_BINARY:optab><SVE_F:mode>_any)
	(*fabd<SVE_F:mode>3, *div<SVE_F:mode>3)
	(*<SVE_COND_FP_MAXMIN_PUBLIC:optab><SVE_F:mode>3)
	(*<SVE_COND_FP_TERNARY:optab><SVE_F:mode>4)
	(*cond_<SVE_COND_FP_TERNARY:optab><SVE_F:mode>_2)
	(*cond_<SVE_COND_FP_TERNARY:optab><SVE_F:mode>_4)
	(*cond_<SVE_COND_FP_TERNARY:optab><SVE_F:mode>_any): Match the
	strictness operands.  Use aarch64_sve_pred_dominates_p to check
	whether the predicate on the conditional operation is suitable
	for merging.  Split patterns into the canonical equal-predicate form.
	(*add<SVE_F:mode>3, *sub<SVE_F:mode>3, *mul<SVE_F:mode>3): Likewise.
	Restrict the unpredicated alternatives to SVE_RELAXED_GP.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64-sve.md (add<mode>3, *add<mode>3)
	(sub<mode>3, *sub<mode>3, *fabd<mode>3, mul<mode>3, *mul<mode>3)
	(div<mode>3, *div<mode>3): Use SVE_COND_FP_* unspecs instead of
	rtx codes.
	(cond_<optab><mode>, *cond_<optab><mode>_2, *cond_<optab><mode>_3)
	(*cond_<optab><mode>_any): Add the predicate to the SVE_COND_FP_*
	unspecs.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/aarch64-sve.md (bic<mode>3): Rename to...
	(*bic<SVE_I:mode>3): ...this.  Match the form that an SVE inverse
	actually has, rather than relying on REG_EQUAL notes.
	Make the insn operand order match the SVE operand order.
	(*<nlogical><PRED_ALL:mode>3): Make the insn operand order match
	the SVE operand order.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_target_reg): New function.
	(aarch64_emit_set_immediate): Likewise.
	(aarch64_ptrue_reg): Build a VNx16BI constant and then bitcast it.
	(aarch64_pfalse_reg): Likewise.
	(aarch64_convert_sve_data_to_pred): New function.
	(aarch64_sve_move_pred_via_while): Take an optional target register
	and the required register mode.
	(aarch64_expand_sve_const_pred_1): New function.
	(aarch64_expand_sve_const_pred): Likewise.
	(aarch64_expand_mov_immediate): Build an all-true predicate
	if the significant bits of the immediate are all true.  Use
	aarch64_expand_sve_const_pred for all compile-time predicate constants.
	(aarch64_mov_operand_p): Force predicate constants to be VNx16BI
	before register allocation.
	* config/aarch64/aarch64-sve.md (*vec_duplicate<mode>_reg): Use
	a VNx16BI PTRUE when splitting the memory alternative.
	(vec_duplicate<mode>): Update accordingly.
	(*pred_cmp<cmp_op><mode>): Rename to...
	(@aarch64_pred_cmp<cmp_op><mode>): ...this.

2019-08-14  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_ptrue_all): Declare.
	* config/aarch64/aarch64.c (aarch64_ptrue_all): New function.
	* config/aarch64/aarch64.md (UNSPEC_PTEST_PTRUE): Delete.
	(UNSPEC_PTEST): New unspec.
	(SVE_MAYBE_NOT_PTRUE, SVE_KNOWN_PTRUE): New constants.
	* config/aarch64/iterators.md (data_bytes): New mode attribute.
	* config/aarch64/predicates.md (aarch64_sve_ptrue_flag): New predicate.
	* config/aarch64/aarch64-sve.md: Add a new section describing the
	handling of UNSPEC_PTEST.
	(pred_<LOGICAL:optab><PRED_ALL:mode>3): Rename to...
	(@aarch64_pred_<LOGICAL:optab><PRED_ALL:mode>_z): ...this.
	(ptest_ptrue<mode>): Replace with...
	(aarch64_ptest<mode>): ...this new pattern.
	(cbranch<mode>4): Update after above changes.
	(*<LOGICAL:optab><PRED_ALL:mode>3_cc): Use UNSPEC_PTEST instead of
	UNSPEC_PTEST_PTRUE.
	(*cmp<SVE_INT_CMP:cmp_op><SVE_I:mode>_cc): Likewise.
	(*cmp<SVE_INT_CMP:cmp_op><SVE_I:mode>_ptest): Likewise.
	(*while_ult<GPI:mode><PRED_ALL:mode>_cc): Likewise.

2019-08-14  Xiong Hu Luo  <luoxhu@linux.ibm.com>

	PR lto/91287
	* builtins.c (builtin_with_linkage_p): New function.
	* builtins.h (builtin_with_linkage_p): New function.
	* symtab.c (write_symbol): Remove redundant assert.
	* lto-streamer-out.c (symtab_node::output_to_lto_symbol_table_p):
	Remove FIXME and use builtin_with_linkage_p.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/91421
	* tree-core.h (function_decl::function_code): Change type to
	unsigned int.
	* tree.h (DECL_FUNCTION_CODE): Rename old definition to...
	(DECL_UNCHECKED_FUNCTION_CODE): ...this.
	(DECL_BUILT_IN_CLASS): Make an rvalue macro only.
	(DECL_FUNCTION_CODE): New function.  Assert that the built-in class
	is BUILT_IN_NORMAL.
	(DECL_MD_FUNCTION_CODE, DECL_FE_FUNCTION_CODE): New functions.
	(set_decl_built_in_function, copy_decl_built_in_function): Likewise.
	(fndecl_built_in_p): Change the type of the "name" argument to
	unsigned int.
	* builtins.c (expand_builtin): Move DECL_FUNCTION_CODE use
	after check for DECL_BUILT_IN_CLASS.
	* cgraphclones.c (build_function_decl_skip_args): Use
	set_decl_built_in_function.
	* ipa-param-manipulation.c (ipa_modify_formal_parameters): Likewise.
	* ipa-split.c (split_function): Likewise.
	* langhooks.c (add_builtin_function_common): Likewise.
	* omp-simd-clone.c (simd_clone_create): Likewise.
	* tree-streamer-in.c (unpack_ts_function_decl_value_fields): Likewise.
	* config/darwin.c (darwin_init_cfstring_builtins): Likewise.
	(darwin_fold_builtin): Use DECL_MD_FUNCTION_CODE instead of
	DECL_FUNCTION_CODE.
	* fold-const.c (operand_equal_p): Compare DECL_UNCHECKED_FUNCTION_CODE
	instead of DECL_FUNCTION_CODE.
	* lto-streamer-out.c (hash_tree): Use DECL_UNCHECKED_FUNCTION_CODE
	instead of DECL_FUNCTION_CODE.
	* tree-streamer-out.c (pack_ts_function_decl_value_fields): Likewise.
	* print-tree.c (print_node): Use DECL_MD_FUNCTION_CODE when
	printing DECL_BUILT_IN_MD.  Handle DECL_BUILT_IN_FRONTEND.
	* config/aarch64/aarch64-builtins.c (aarch64_expand_builtin)
	(aarch64_fold_builtin, aarch64_gimple_fold_builtin): Use
	DECL_MD_FUNCTION_CODE instead of DECL_FUNCTION_CODE.
	* config/aarch64/aarch64.c (aarch64_builtin_reciprocal): Likewise.
	* config/alpha/alpha.c (alpha_expand_builtin, alpha_fold_builtin):
	(alpha_gimple_fold_builtin): Likewise.
	* config/arc/arc.c (arc_expand_builtin): Likewise.
	* config/arm/arm-builtins.c (arm_expand_builtin): Likewise.
	* config/avr/avr-c.c (avr_resolve_overloaded_builtin): Likewise.
	* config/avr/avr.c (avr_expand_builtin, avr_fold_builtin): Likewise.
	* config/bfin/bfin.c (bfin_expand_builtin): Likewise.
	* config/c6x/c6x.c (c6x_expand_builtin): Likewise.
	* config/frv/frv.c (frv_expand_builtin): Likewise.
	* config/gcn/gcn.c (gcn_expand_builtin_1): Likewise.
	(gcn_expand_builtin): Likewise.
	* config/i386/i386-builtins.c (ix86_builtin_reciprocal): Likewise.
	(fold_builtin_cpu): Likewise.
	* config/i386/i386-expand.c (ix86_expand_builtin): Likewise.
	* config/i386/i386.c (ix86_fold_builtin): Likewise.
	(ix86_gimple_fold_builtin): Likewise.
	* config/ia64/ia64.c (ia64_fold_builtin): Likewise.
	(ia64_expand_builtin): Likewise.
	* config/iq2000/iq2000.c (iq2000_expand_builtin): Likewise.
	* config/mips/mips.c (mips_expand_builtin): Likewise.
	* config/msp430/msp430.c (msp430_expand_builtin): Likewise.
	* config/nds32/nds32-intrinsic.c (nds32_expand_builtin_impl): Likewise.
	* config/nios2/nios2.c (nios2_expand_builtin): Likewise.
	* config/nvptx/nvptx.c (nvptx_expand_builtin): Likewise.
	* config/pa/pa.c (pa_expand_builtin): Likewise.
	* config/pru/pru.c (pru_expand_builtin): Likewise.
	* config/riscv/riscv-builtins.c (riscv_expand_builtin): Likewise.
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
	Likewise.
	* config/rs6000/rs6000-call.c (htm_expand_builtin): Likewise.
	(altivec_expand_dst_builtin, altivec_expand_builtin): Likewise.
	(rs6000_gimple_fold_builtin, rs6000_expand_builtin): Likewise.
	* config/rs6000/rs6000.c (rs6000_builtin_md_vectorized_function)
	(rs6000_builtin_reciprocal): Likewise.
	* config/rx/rx.c (rx_expand_builtin): Likewise.
	* config/s390/s390-c.c (s390_resolve_overloaded_builtin): Likewise.
	* config/s390/s390.c (s390_expand_builtin): Likewise.
	* config/sh/sh.c (sh_expand_builtin): Likewise.
	* config/sparc/sparc.c (sparc_expand_builtin): Likewise.
	(sparc_fold_builtin): Likewise.
	* config/spu/spu-c.c (spu_resolve_overloaded_builtin): Likewise.
	* config/spu/spu.c (spu_expand_builtin): Likewise.
	* config/stormy16/stormy16.c (xstormy16_expand_builtin): Likewise.
	* config/tilegx/tilegx.c (tilegx_expand_builtin): Likewise.
	* config/tilepro/tilepro.c (tilepro_expand_builtin): Likewise.
	* config/xtensa/xtensa.c (xtensa_fold_builtin): Likewise.
	(xtensa_expand_builtin): Likewise.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/91421
	* attribs.c (decl_attributes): Check the DECL_BUILT_IN_CLASS
	before the DECL_FUNCTION_CODE.
	* calls.c (maybe_warn_alloc_args_overflow): Use fndecl_built_in_p
	to check for a BUILT_IN_ALLOCA call.
	* ipa-cp.c (ipa_get_indirect_edge_target_1): Likewise for
	BUILT_IN_UNREACHABLE.  Don't check for a FUNCTION_TYPE.
	* ipa-devirt.c (possible_polymorphic_call_target_p): Likewise.
	* ipa-prop.c (try_make_edge_direct_virtual_call): Likewise.
	* gimple-ssa-isolate-paths.c (is_addr_local): Check specifically
	for BUILT_IN_NORMAL functions.
	* trans-mem.c (expand_block_edges): Use gimple_call_builtin_p to
	test for BUILT_IN_TM_ABORT.
	* tree-ssa-ccp.c (optimize_stack_restore): Use fndecl_built_in_p
	to check for a BUILT_IN_STACK_RESTORE call.
	(optimize_stdarg_builtin): Remove redundant check for GIMPLE_CALL.
	* tree-ssa-threadedge.c
	(record_temporary_equivalences_from_stmts_at_dest): Check for a
	BUILT_IN_NORMAL decl before checking its DECL_FUNCTION_CODE.
	* tree-vect-patterns.c (vect_recog_pow_pattern): Use a positive
	test for a BUILT_IN_NORMAL call instead of a negative test for
	an internal function call.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* tree.h (build_vector_a_then_b): Declare.
	* tree.c (build_vector_a_then_b): New function.
	* fold-const-call.c (fold_while_ult): Likewise.
	(fold_const_call): Use it to handle IFN_WHILE_ULT.
	* config/aarch64/aarch64-protos.h (AARCH64_FOR_SVPATTERN): New macro.
	(aarch64_svpattern): New enum.
	* config/aarch64/aarch64-sve.md (mov<PRED_ALL:mode>): Pass
	constants through aarch64_expand_mov_immediate.
	(*aarch64_sve_mov<PRED_ALL:mode>): Use aarch64_mov_operand rather
	than general_operand as the predicate for operand 1.
	(while_ult<GPI:mode><PRED_ALL:mode>): Add a '@' marker.
	* config/aarch64/aarch64.c (simd_immediate_info::PTRUE): New
	insn_type.
	(simd_immediate_info::simd_immediate_info): New overload that
	takes a scalar_int_mode and an svpattern.
	(simd_immediate_info::u): Add a "pattern" field.
	(svpattern_token): New function.
	(aarch64_get_sve_pred_bits, aarch64_widest_sve_pred_elt_size)
	(aarch64_partial_ptrue_length, aarch64_svpattern_for_vl)
	(aarch64_sve_move_pred_via_while): New functions.
	(aarch64_expand_mov_immediate): Try using
	aarch64_sve_move_pred_via_while for predicates that contain N ones
	followed by M zeros but that do not correspond to a VLnnn pattern.
	(aarch64_sve_pred_valid_immediate): New function.
	(aarch64_simd_valid_immediate): Use it instead of dealing directly
	with PTRUE and PFALSE.
	(aarch64_output_sve_mov_immediate): Handle new simd_immediate_info
	forms.

2019-08-13 Iain Sandoe <iain@sandoe.co.uk>

	* config/darwin.c (machopic_indirect_call_target): Rename symbol stub
	flag.
	(darwin_override_options): Likewise.
	* config/darwin.h: Likewise.
	* config/darwin.opt: Likewise.
	* config/i386/i386.c (output_pic_addr_const): Likewise.
	* config/rs6000/darwin.h: Likewise.
	* config/rs6000/rs6000.c (rs6000_call_darwin_1): Likewise.
	* config/i386/darwin.h (TARGET_MACHO_PICSYM_STUBS): Rename to ...
	... this TARGET_MACHO_SYMBOL_STUBS.
	(FUNCTION_PROFILER):Likewise.
	* config/i386/i386.h: Likewise.

2019-08-13  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.c (ix86_expand_vector_extract)
	<case E_V2SImode>: Use vec_extr path for
	TARGET_MMX_WITH_SSE && TARGET_SSE4_1.
	<case E_V8QImode>: Ditto.
	* config/i386/mmx.md (*mmx_pextrw_zext): Rename from mmx_pextrw.
	Use SWI48 mode iterator.  Use %k to output operand 0.
	(*mmx_pextrw): New insn pattern.
	(*mmx_pextrb): Ditto.
	(*mmx_pextrb_zext): Ditto.

2019-08-13  Jonathan Wakely  <jwakely@redhat.com>

	* target.def (libc_has_function, libc_has_fast_function): Improve
	documentation strings.
	* doc/tm.texi: Regenerate.

2019-08-13  Caroline Tice  <cmtice@google.com>

	PR other/91396
	* config/gnu-user.h (GNU_USER_TARGET_ENDFILE_SPEC): Only add the
	vtv_end.o or vtv_end_preinit.o files if !static.

2019-08-13  Olivier Hainque  <hainque@adacore.com>

	* rtl.h (tablejump_casesi_pattern): Move declaration to proper spot.

2019-08-13  Olivier Hainque  <hainque@adacore.com>

	* rtlanal.c (tablejump_casesi_pattern): New function, to
	determine if a tablejump insn is a casesi dispatcher. Extracted
	from patch_jump_insn.
	* rtl.h (tablejump_casesi_pattern): Declare.
	* cfgrtl.c (patch_jump_insn): Use it.
	* dwarf2cfi.c (create_trace_edges): Use it.

2019-08-13  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/81800
	* config/aarch64/aarch64.md (lrint): Disable lrint pattern if GPF
	operand is larger than a long int.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* machmode.h (opt_mode::else_mode): New function.
	(opt_mode::else_blk): Use it.
	* config/aarch64/aarch64-protos.h (aarch64_vq_mode): Declare.
	(aarch64_full_sve_mode, aarch64_sve_ld1rq_operand_p): Likewise.
	(aarch64_gen_stepped_int_parallel): Likewise.
	(aarch64_stepped_int_parallel_p): Likewise.
	(aarch64_expand_mov_immediate): Remove the optional gen_vec_duplicate
	argument.
	* config/aarch64/aarch64.c
	(aarch64_expand_sve_widened_duplicate): Delete.
	(aarch64_expand_sve_dupq, aarch64_expand_sve_ld1rq): New functions.
	(aarch64_expand_sve_const_vector): Rewrite to handle more cases.
	(aarch64_expand_mov_immediate): Remove the optional gen_vec_duplicate
	argument.  Use early returns in the !CONST_INT_P handling.
	Pass all SVE data vectors to aarch64_expand_sve_const_vector rather
	than handling some inline.
	(aarch64_full_sve_mode, aarch64_vq_mode): New functions, split out
	from...
	(aarch64_simd_container_mode): ...here.
	(aarch64_gen_stepped_int_parallel, aarch64_stepped_int_parallel_p)
	(aarch64_sve_ld1rq_operand_p): New functions.
	* config/aarch64/predicates.md (descending_int_parallel)
	(aarch64_sve_ld1rq_operand): New predicates.
	* config/aarch64/constraints.md (UtQ): New constraint.
	* config/aarch64/aarch64.md (UNSPEC_REINTERPRET): New unspec.
	* config/aarch64/aarch64-sve.md (mov<SVE_ALL:mode>): Remove the
	gen_vec_duplicate from call to aarch64_expand_mov_immediate.
	(@aarch64_sve_reinterpret<mode>): New expander.
	(*aarch64_sve_reinterpret<mode>): New pattern.
	(@aarch64_vec_duplicate_vq<mode>_le): New pattern.
	(@aarch64_vec_duplicate_vq<mode>_be): Likewise.
	(*sve_ld1rq<Vesize>): Replace with...
	(@aarch64_sve_ld1rq<mode>): ...this new pattern.

2019-08-13  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/aarch64/aarch64.c (generic_tunings): Set function alignment to
	16:12.

2019-08-13  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/driver-msp430.c (msp430_set_driver_var): New.
	* config/msp430/msp430-devices.c (canonicalize_path_dirsep): New.
	(msp430_check_path_for_devices): New.
	(parse_devices_csv_1): New.
	(parse_devices_csv): New.
	(msp430_extract_mcu_data): Try to find devices.csv and search for the
	MCU data in devices.csv before using the hard-coded data.
	Warn if devices.csv isn't found and the MCU wasn't found in the
	hard-coded data either.
	* config/msp430/msp430.h (DRIVER_SELF_SPECS): Call
	msp430_set_driver_var for -mno-warn-devices-csv and -mdevices-csv-loc.
	Search for devices.csv on -I and -L paths.
	(EXTRA_SPEC_FUNCTIONS): Add msp430_check_path_for_devices and
	msp430_set_driver_var.
	* config/msp430/msp430.opt: Add -mwarn-devices-csv and
	-mdevices-csv-loc=.
	* doc/invoke.texi (-mmcu): Document that -I and -L paths are
	searched for devices.csv.
	(mwarn-devices-csv): Document option.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_output_ptrue): Delete.
	* config/aarch64/aarch64-sve.md (*aarch64_sve_mov<PRED_ALL:mode>):
	Use a single Dn alternative instead of separate Dz and Dm
	alternatives.  Use aarch64_output_sve_move_immediate.
	* config/aarch64/aarch64.c (aarch64_sve_element_int_mode): New
	function.
	(aarch64_simd_valid_immediate): Fill in the simd_immediate_info
	for predicates too.
	(aarch64_output_sve_mov_immediate): Handle predicate modes.
	(aarch64_output_ptrue): Delete.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (simd_immediate_info::insn_type): Add
	INDEX.
	(simd_immediate_info::value, simd_immediate_info::step)
	(simd_immediate_info::modifier, simd_immediate_info::shift): Replace
	with...
	(simd_immediate_info::u): ...this new union.
	(simd_immediate_info::simd_immediate_info): Update accordingly.
	(aarch64_output_simd_mov_immediate): Likewise.
	(aarch64_output_sve_mov_immediate): Likewise.

2019-08-13  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config.gcc (msp430*-*-*): Add msp430-devices.o to extra_objs and
	extra_gcc_objs.
	* config/msp430/driver-msp430.c: Remove msp430_mcu_data.
	(msp430_select_cpu): New spec function.
	(msp430_select_hwmult_lib): Use msp430_extract_mcu_data to extract
	MCU data.
	* config/msp430/msp430-devices.c: New file.
	* config/msp430/msp430-devices.h: New file.
	* config/msp430/msp430.c: Remove msp430_mcu_data.
	(msp430_option_override): Use msp430_extract_mcu_data to extract
	MCU data.
	(msp430_use_f5_series_hwmult): Likewise.
	(use_32bit_hwmult): Likewise.
	(msp430_no_hwmult): Likewise.
	* config/msp430/msp430.h (ASM_SPEC): Don't pass -mmcu to the
	assembler.
	(DRIVER_SELF_SPECS): Call msp430_select_cpu if -mmcu is used without
	and -mcpu option.
	(EXTRA_SPEC_FUNCTIONS): Add msp430_select_cpu.
	* config/msp430/t-msp430: Add rule to build msp430-devices.o.
	Remove hard-coded MCU multilib data.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.c (aarch64_classify_vector_mode): Switch
	based on the mode instead of testing properties of it.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/md.texi: Document the x and y constraints for AArch64.
	* config/aarch64/aarch64.h (FP_LO8_REGNUM_P): New macro.
	(FP_LO8_REGS): New reg_class.
	(REG_CLASS_NAMES, REG_CLASS_CONTENTS): Add an entry for FP_LO8_REGS.
	* config/aarch64/aarch64.c (aarch64_hard_regno_nregs)
	(aarch64_regno_regclass, aarch64_class_max_nregs): Handle FP_LO8_REGS.
	* config/aarch64/predicates.md (aarch64_simd_register): Use
	FP_REGNUM_P instead of checking the classes manually.
	* config/aarch64/constraints.md (y): New constraint.

2019-08-13  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (perm_insn): Include the "1"/"2" suffix.
	(perm_hilo): Remove UNSPEC_ZIP*, UNSEPC_TRN* and UNSPEC_UZP*.
	* config/aarch64/aarch64-simd.md
	(aarch64_<PERMUTE:perm_insn><PERMUTE:perm_hilo><mode>): Rename to..
	(aarch64_<PERMUTE:perm_insn><mode>): ...this and remove perm_hilo
	from the asm template.
	* config/aarch64/aarch64-sve.md
	(aarch64_<perm_insn><perm_hilo><PRED_ALL:mode>): Rename to..
	(aarch64_<perm_insn><PRED_ALL:mode>): ...this and remove perm_hilo
	from the asm template.
	(aarch64_<perm_insn><perm_hilo><SVE_ALL:mode>): Rename to..
	(aarch64_<perm_insn><SVE_ALL:mode>): ...this and remove perm_hilo
	from the asm template.
	* config/aarch64/aarch64-simd-builtins.def: Update comment.

2019-08-13  Martin Liska  <mliska@suse.cz>

	* value-prof.c (gimple_ic_transform): Add new line.
	Print details with MSG_NOTE.

2019-08-13  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Document automatic detection of jobserver.
	* lto-wrapper.c (run_gcc): Detect jobserver always.

2019-08-13  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.c (ix86_expand_vector_set)
	<case E_V2SImode>: Use vec_merge path for
	TARGET_MMX_WITH_SSE && TARGET_SSE4_1.
	<case E_V8QImode>: Ditto.
	* config/i386/mmx.md (*mmx_pinsrd): New insn pattern.
	(*mmx_pinsrb): Ditto.

2019-08-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/83250
	PR target/91340
	* config/i386/avxintrin.h (_mm256_zextpd128_pd256,
	_mm256_zextps128_ps256, _mm256_zextsi128_si256): New intrinsics.
	* config/i386/avx512fintrin.h (_mm512_zextpd128_pd512,
	_mm512_zextps128_ps512, _mm512_zextsi128_si512, _mm512_zextpd256_pd512,
	_mm512_zextps256_ps512, _mm512_zextsi256_si512): Likewise.

2019-08-12  Richard Biener  <rguenther@suse.de>

	PR lto/91375
	* tree.c (free_lang_data_in_type): Do not free TYPE_BINFO dependent on
	flag_devirtualize.

2019-08-12  Richard Biener  <rguenther@suse.de>

	PR driver/91130
	* lto-wrapper.c (get_options_from_collect_gcc_options): Remove
	lang_mask option, always use CL_DRIVER.
	(get_options_from_collect_gcc_options): Adjust.
	(find_and_merge_options): Likewise.
	(run_gcc): Likewise.

2019-08-12  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* ipa-predicate.c (add_condition): Restore inverted test.

2019-08-10  Jakub Jelinek  <jakub@redhat.com>

	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE_DEVICE_TYPE.
	(enum omp_clause_device_type_kind): New enum.
	(struct tree_omp_clause): Add subcode.device_type_kind.
	* tree.h (OMP_CLAUSE_DEVICE_TYPE_KIND): Define.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add entries
	for device_type clause.
	(walk_tree_1): Handle OMP_CLAUSE_DEVICE_TYPE.
	* tree-pretty-print.c (dump_omp_clause): Likewise.

	PR target/91408
	* config/i386/mmx.md (usadv8qi): Use register_operand instead of
	vector_operand.

2019-08-09  Vladimir Makarov  <vmakarov@redhat.com>

	* reload1.c (finish_spills): Do not check ira_conflicts_p when
	handling spilled pseudos.

2019-08-09  Richard Earnshaw  <rearnsha@arm.com>

	PR target/91386
	* config/aarch64/aarch64.c (aarch64_gen_adjusted_ldpstp): Use copy_rtx
	to preserve the contents of the original insns.

2019-08-09  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/arm.md (addsi3_compare_op1): Add 16-bit thumb-2 variants.
	(addsi3_compare_op2): Likewise.

2019-08-09  Martin Liska  <mliska@suse.cz>

	* alias.c (alias_ptr_types_compatible_p): Strengten
	type comparison in LTO mode.

2019-08-09  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/90313
	* tree-tailcall.c (find_tail_calls): Reject calls that might
	read from an escaped RESULT_DECL.

2019-08-09  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Document the option value.
	* lto-wrapper.c (run_gcc): Set auto_parallel
	only with -flto=auto.

2019-08-09  Martin Liska  <mliska@suse.cz>

	* opts.c (common_handle_option): Error for an invalid argument
	to -flto=.

2019-08-09  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sem_function::merge): Define AUTO_DUMP_SCOPE and
	use dump_printf to report optimization.
	(sem_variable::merge): Likwise.
	(sem_item_optimizer::merge_classes): Use dump_printf to report
	ICF hits.

2019-08-09  Martin Liska  <mliska@suse.cz>

	* value-prof.c (gimple_divmod_fixed_value_transform):
	Use dump_printf_loc.
	(gimple_mod_pow2_value_transform): Likewise.
	(gimple_mod_subtract_transform): Likewise.
	(init_node_map): Likewise.
	(gimple_ic_transform): Likewise.
	(gimple_stringops_transform): Likewise.

2019-08-08  Mihailo Stojanovic  <mistojanovic@wavecomp.com>

	* doc/extend.texi: Add const qualifier to ld intrinsics.

2019-08-08  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/dfp.md (D64_D128): Rename to ...
	(DDTD): ... this, throughout.
	(dfp_suffix): Rename to ...
	(q): ... this, throughout.

2019-08-08  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/dfp.md (D64_D128): Move earlier in the file.
	(dfp_suffix): Ditto.
	(adddd3, addtd3): Merge to ...
	(add<mode>3 for D64_D128): ... this.
	(subdd3, subtd3): Merge to ...
	(sub<mode>3 for D64_D128): ... this.
	(muldd3, multd3): Merge to ...
	(mul<mode>3 for D64_D128): ... this.
	(divdd3, divtd3): Merge to ...
	(div<mode>3 for D64_D128): ... this.
	(*cmpdd_internal1, *cmptd_internal1): Merge to ...
	(*cmp<mode>_internal1 for D64_D128): ... this.
	(ftruncdd2, ftrunctd2): Merge to ...
	(ftrunc<mode>2 for D64_D128): ... this.
	(fixdddi2, fixtddi2): Merge to ...
	(fix<mode>di2 for D64_D128): ... this.

2019-08-08  Jim Wilson  <jimw@sifive.com>

	PR target/91229
	* config/riscv/riscv.c (riscv_flatten_aggregate_field): New arg
	ignore_zero_width_bit_field_p.  Skip zero size bitfields when true.
	Pass into recursive call.
	(riscv_flatten_aggregate_argument): New arg.  Pass to
	riscv_flatten_aggregate_field.
	(riscv_pass_aggregate_in_fpr_pair_p): New local warned.  Call
	riscv_flatten_aggregate_argument twice, with false and true as last
	arg.  Process result twice.  Compare results and warn if different.
	(riscv_pass_aggregate_in_fpr_and_gpr_p): Likewise.

2019-08-08  Martin Liska  <mliska@suse.cz>

	PR bootstrap/91352
	* gcc.c (driver::detect_jobserver): Use is_valid_fd.
	* lto-wrapper.c (jobserver_active_p): Likewise.

2019-08-08  Martin Liska  <mliska@suse.cz>

	* cgraphclones.c (set_new_clone_decl_and_node_flags): Drop
	IS_OPERATOR_NEW and IS_OPERATOR_DELETE.
	(create_version_clone_with_body): Likewise.

2019-08-08  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (omp_add_variable): Use GOVD_PRIVATE | GOVD_EXPLICIT
	for VLA helper variables on target data even if not GOVD_FIRSTPRIVATE.
	(gimplify_scan_omp_clauses): For OMP_CLAUSE_USE_DEVICE_* use just
	GOVD_EXPLICIT flags.
	(gimplify_omp_workshare): For OMP_TARGET_DATA move all
	OMP_CLAUSE_USE_DEVICE_* clauses to the end of clauses chain.
	* omp-low.c (scan_sharing_clauses): For OMP_CLAUSE_USE_DEVICE_*
	call install_var_field with mask 11 instead of 3.
	(lower_omp_target): For OMP_CLAUSE_USE_DEVICE_* use pass
	(splay_tree_key) &DECL_UID (var) to build_sender_ref instead of var.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/constraints.md (Z): Handle floating-point zeros too.
	* config/aarch64/predicates.md (aarch64_reg_or_zero): Likewise.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (vec_shl_insert_<mode>): Add
	MOVPRFX alternatives.  Make the GPR alternatives more expensive
	than the FPR ones.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (fold_extract_last_<mode>):
	Disparage the GPR alternative relative to the FPR one.
	Fix handling of 8-bit and 16-bit FPR values.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (BITWISEV): Delete.
	(SVE_INT_REDUCTION, SVE_FP_REDUCTION): New int iterators.
	(optab): Handle UNSPEC_UMAXV, UNSPEC_UMINV, UNSPEC_SMAXV,
	UNSPEC_SMINV, UNSPEC_FADDV, UNSPEC_FMAXNMV, UNSPEC_FMAXV,
	UNSPEC_FMINNMV, UNSPEC_FMINV.
	(bit_reduc_op): Delete.
	(sve_int_op): New int attribute.
	(sve_fp_op): Handle UNSPEC_FADDV, UNSPEC_FMAXNMV, UNSPEC_FMAXV,
	UNSPEC_FMINNMV, UNSPEC_FMINV.
	* config/aarch64/aarch64-sve.md
	(reduc_<MAXMINV:maxmin_uns>_scal_<SVE_I:mode>)
	(*reduc_<MAXMINV:maxmin_uns>_scal_<SVE_I:mode>)
	(reduc_<BITWISEV:optab>_scal_<SVE_I:mode>)
	(*reduc_<BITWISEV:optab>_scal_<SVE_I:mode>): Merge into...
	(reduc_<SVE_INT_REDUCTION:optab>_scal_<SVE_I:mode>)
	(*reduc_<SVE_INT_REDUCTION:optab>_scal_<SVE_I:mode>): ...these
	new patterns.
	(reduc_plus_scal_<SVE_F:mode>, *reduc_plus_scal_<SVE_I:mode>)
	(reduc_<FMAXMINV:optab>_scal_<SVE_F:mode>)
	(*reduc_<FMAXMINV:optab>_scal_<SVE_F:mode>): Merge into...
	(reduc_<SVE_FP_REDUCTION:optab>_scal_<SVE_F:mode>)
	(*reduc_<SVE_FP_REDUCTION:optab>_scal_<SVE_F:mode>): ...these
	new patterns.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (fma<mode>4, *fma<mode>4)
	(fnma<mode>4, *fnma<mode>4, fnms<mode>4, *fnms<mode>4)
	(fms<mode>4, *fms<mode>4): Replace with...
	(<SVE_COND_FP_TERNARY:optab><SVE_F:mode>4)
	(*<SVE_COND_FP_TERNARY:optab><SVE_F:mode>4): ...these new patterns.
	Use unspecs instead of rtx codes.
	(cond_<optab><mode>, *cond_<optab><mode>_2, *cond_<optab><mode>_4)
	(*cond_<optab><mode>_any): Add the predicate to SVE_COND_FP_TERNARY.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (SVE_COND_FP_MAXMIN_PUBLIC): New
	int iterator.
	(maxmin_uns_op): Handle UNSPEC_COND_FMAXNM and UNSPEC_COND_FMINNM.
	* config/aarch64/aarch64-sve.md
	(<FMAXMIN:su><FMAXMIN:maxmin><SVE_F:mode>3): Rename to...
	(<SVE_COND_FP_MAXMIN_PUBLIC:optab><SVE_F:mode>3): ...this and
	use a single unspec for the rhs.
	(*<su><maxmin><mode>3): Delete.
	(<maxmin_uns><SVE_F:mode>3): Use a single unspec for the rhs.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (UNSPEC_COND_FABS, UNSPEC_COND_FNEG)
	(UNSPEC_COND_FRINTA, UNSPEC_COND_FRINTI, UNSPEC_COND_FRINTM)
	(UNSPEC_COND_FRINTN, UNSPEC_COND_FRINTP, UNSPEC_COND_FRINTX)
	(UNSPEC_COND_FRINTZ, UNSPEC_COND_FSQRT): New unspecs.
	(optab, sve_fp_op): Handle them.
	(SVE_FP_UNARY): Delete.
	(optab): Remove sqrt entry.
	(sve_fp_op): Remove neg, abs and sqrt entries.
	(SVE_COND_FP_UNARY): New int iterator.
	* config/aarch64/aarch64-sve.md (<frint_pattern><mode>2)
	(*<frint_pattern><mode>2): Delete.
	(<SVE_FP_UNARY:optab><SVE_F:mode>2): Replace with...
	(<SVE_COND_FP_UNARY:optab><SVE_F:mode>2): ...this.
	(*<SVE_FP_UNARY:optab><SVE_F:mode>2): Replace with...
	(*<SVE_COND_FP_UNARY:optab><SVE_F:mode>2): ...this.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (*pred_fold_left_plus_<mode>): Delete.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (UNSPEC_COND_ADD): Rename to...
	(UNSPEC_COND_FADD): ...this.
	(UNSPEC_COND_SUB): Rename to...
	(UNSPEC_COND_FSUB): ...this.
	(UNSPEC_COND_MUL): Rename to...
	(UNSPEC_COND_FMUL): ...this.
	(UNSPEC_COND_DIV): Rename to...
	(UNSPEC_COND_FDIV): ...this.
	(UNSPEC_COND_MAX): Rename to...
	(UNSPEC_COND_FMAXNM): ...this.
	(UNSPEC_COND_MIN): Rename to...
	(UNSPEC_COND_FMINNM): ...this.
	(UNSPEC_COND_LT): Rename to...
	(UNSPEC_COND_FCMLT): ...this.
	(UNSPEC_COND_LE): Rename to...
	(UNSPEC_COND_FCMLE): ...this.
	(UNSPEC_COND_EQ): Rename to...
	(UNSPEC_COND_FCMEQ): ...this.
	(UNSPEC_COND_NE): Rename to...
	(UNSPEC_COND_FCMNE): ...this.
	(UNSPEC_COND_GE): Rename to...
	(UNSPEC_COND_FCMGE): ...this.
	(UNSPEC_COND_GT): Rename to...
	(UNSPEC_COND_FCMGT): ...this.
	(SVE_COND_FP_BINARY, SVE_COND_FP_CMP, optab, cmp_op, sve_fp_op)
	(sve_fp_op_rev): Update accordingly.
	* config/aarch64/aarch64.c (aarch64_unspec_cond_code): Likewise.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md: Reorganize contents and add
	banner comments.
	* config/aarch64/check-sve-md.awk: New file.
	* config/aarch64/t-aarch64 (s-check-sve-md): New rule.
	(insn-conditions.md): Depend on it.

2019-08-07  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91385
	* config/i386/sse.md (*negsi2_1_zext): Simplify insn pattern.
	(*negsi2_cmpz_zext): Ditto.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/iterators.md (commutative): Remove.

2019-08-07  Richard Earnshaw  <rearnsha@arm.com>

	PR driver/91130
	* lto-wrapper.c (find_and_merge_options): Use CL_DRIVER when
	processing COLLECT_GCC_OPTIONS.
	(run_gcc): Likewise.

2019-08-07  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR tree-optimization/91109
	* lra-remat.c (update_scratch_ops): Remove assignment of the
	hard register.

2019-08-07  Richard Sandiford  <richard.sandiford@arm.com>

	* data-streamer.h (streamer_write_poly_uint64): Declare.
	(streamer_read_poly_uint64): Likewise.
	* data-streamer-in.c (streamer_read_poly_uint64): New function.
	* data-streamer-out.c (streamer_write_poly_uint64): Likewise.
	* ipa-predicate.h (condition::size): Turn into a poly_int64.
	(add_condition): Take a poly_int64 size.
	* ipa-predicate.c (add_condition): Likewise.
	* ipa-prop.h (ipa_load_from_parm_agg): Take a poly_int64 size pointer.
	* ipa-prop.c (ipa_load_from_parm_agg): Likewise.
	(ipcp_modif_dom_walker::before_dom_children): Update accordingly.
	* ipa-fnsummary.c (evaluate_conditions_for_known_args): Handle
	condition::size as a poly_int64.
	(unmodified_parm_1): Take a poly_int64 size pointer.
	(unmodified_parm): Likewise.
	(unmodified_parm_or_parm_agg_item): Likewise.
	(set_cond_stmt_execution_predicate): Update accordingly.
	(set_switch_stmt_execution_predicate): Likewise.
	(will_be_nonconstant_expr_predicate): Likewise.
	(will_be_nonconstant_predicate): Likewise.
	(inline_read_section): Stream condition::size as a poly_int.
	(ipa_fn_summary_write): Likewise.

2019-08-07  Martin Liska  <mliska@suse.cz>

	* fold-const.c (twoval_comparison_p): Replace int
	with bool as a return type.
	(simple_operand_p): Likewise.
	(operand_equal_p): Replace int with bool as a return type.
	* fold-const.h (operand_equal_p): Likewise.

2019-08-07  Jakub Jelinek  <jakub@redhat.com>

	* tree-core.h (enum omp_clause_code): Adjust OMP_CLAUSE_USE_DEVICE_PTR
	OpenMP description.  Add OMP_CLAUSE_USE_DEVICE_ADDR clause.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add entries
	for OMP_CLAUSE_USE_DEVICE_ADDR clause.
	(walk_tree_1): Handle OMP_CLAUSE_USE_DEVICE_ADDR.
	* tree-pretty-print.c (dump_omp_clause): Likewise.
	* tree-nested.c (convert_nonlocal_omp_clauses,
	convert_local_omp_clauses): Likewise.
	* gimplify.c (gimplify_scan_omp_clauses, gimplify_adjust_omp_clauses):
	Likewise.
	* omp-low.c (scan_sharing_clauses, lower_omp_target): Likewise.
	Treat OMP_CLAUSE_USE_DEVICE_ADDR like OMP_CLAUSE_USE_DEVICE_PTR
	clause with array or reference to array types, no matter what type
	except for reference it has.

2019-08-07  Kewen Lin  <linkw@gcc.gnu.org>

	* config/rs6000/vector.md (vrotr<mode>3): New define_expand.

2019-08-07  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/multilib-generator: (canonical_order): Add 'g'.
	(arch_canonicalize): Support rv32g and rv64g and fix error
	handling.

2019-08-06  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::dump): Dump DECL_IS_OPERATOR_NEW_P
	and DECL_IS_OPERATOR_DELETE_P.

2019-08-06  Jakub Jelinek  <jakub@redhat.com>

	* tree.h (OMP_CLAUSE_LASTPRIVATE_TASKLOOP_IV): Rename to ...
	(OMP_CLAUSE_LASTPRIVATE_LOOP_IV): ... this.  Adjust comment.
	* gimplify.c (gimple_add_tmp_var): In SIMD contexts, turn addressable
	new vars into GOVD_PRIVATE rather than GOVD_LOCAL.
	(gimplify_omp_for): Don't do C++ random access iterator clause
	adjustments on combined constructs from OMP_LOOP.  For OMP_LOOP,
	don't predetermine the artificial iterator in case of C++ random
	access iterators as lastprivate, but private.  For OMP_LOOP, force
	bind expr around simd body and force for_pre_body before the
	construct.  Use OMP_CLAUSE_LASTPRIVATE_LOOP_IV instead of
	OMP_CLAUSE_LASTPRIVATE_TASKLOOP_IV.
	(gimplify_omp_loop): Add firstprivate clauses on OMP_PARALLEL for
	diff var of C++ random access iterators.  Handle
	OMP_CLAUSE_FIRSTPRIVATE.  For OMP_CLAUSE_LASTPRIVATE_LOOP_IV, if
	not outermost also add OMP_CLAUSE_FIRSTPRIVATE, and in both cases
	clear OMP_CLAUSE_LASTPRIVATE_LOOP_IV on the lastprivate clause
	on the OMP_FOR and OMP_DISTRIBUTE constructs if any.
	* omp-low.c (lower_rec_input_clauses): For
	OMP_CLAUSE_LASTPRIVATE_LOOP_IV on simd copy construct the private
	variables instead of default constructing them.
	(lower_lastprivate_clauses): Use OMP_CLAUSE_LASTPRIVATE_LOOP_IV
	instead of OMP_CLAUSE_LASTPRIVATE_TASKLOOP_IV and move the
	is_taskloop_ctx check from the assert to the guarding condition.

2019-08-06  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/multilib-generator: (canonical_order): New.
	(arch_canonicalize): Dito.
	Apply arch_canonicalize for alts.

2019-08-05  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (Common Variable Attributes): Document alias
	attribute.

2019-08-05  Marek Polacek  <polacek@redhat.com>

	PR c++/91338 - Implement P1161R3: Deprecate a[b,c].
	* doc/invoke.texi: Document -Wcomma-subscript.

2019-08-05  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-core.h (tree_function_decl): Make function_code an
	independent field.  Group the remaining bitfields into bytes
	and move decl_type so that it contines to be at a byte boundary.
	Leave 12 bits for future expansion.

2019-08-05  Richard Sandiford  <richard.sandiford@arm.com>

	* gimple-fold.c (gimple_fold_mask_load_store_mem_ref)
	(gimple_fold_mask_load, gimple_fold_mask_store): New functions.
	(gimple_fold_call): Use them to fold IFN_MASK_LOAD and
	IFN_MASK_STORE.

2019-08-05  Richard Sandiford  <richard.sandiford@arm.com>

	* gimple.h (gimple_move_vops): Declare.
	* gimple.c (gimple_move_vops): New function
	* gimple-fold.c (replace_call_with_call_and_fold)
	(gimple_fold_builtin_memory_op, gimple_fold_builtin_memset)
	(gimple_fold_builtin_stpcpy, fold_builtin_atomic_compare_exchange)
	(gimple_fold_call): Use it.
	* ipa-param-manipulation.c (ipa_modify_call_arguments): Likewise.
	* tree-call-cdce.c (use_internal_fn): Likewise.
	* tree-if-conv.c (predicate_load_or_store): Likewise.
	* tree-ssa-ccp.c (optimize_atomic_bit_test_and): Likewise.
	* tree-ssa-math-opts.c (pass_cse_reciprocals::execute): Likewise.
	* tree-ssa-propagate.c (finish_update_gimple_call): Likewise.
	(update_call_from_tree): Likewise.
	* tree-vect-stmts.c (vectorizable_load): Likewise.
	* tree-vectorizer.c (adjust_simduid_builtins): Likewise.

2019-08-05  Martin Liska  <mliska@suse.cz>

	PR c++/91334
	* tree-ssa-dce.c (propagate_necessity): Handle new operators
	with not arguments.
	(eliminate_unnecessary_stmts): Likewise.

2019-08-05  Richard Biener  <rguenther@suse.de>

	PR middle-end/91169
	* fold-const.c (get_array_ctor_element_at_index): Create
	offset_ints according to the sign of the index type and treat
	that as signed if it is obviously so.

2019-08-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/91341
	* config/i386/avxintrin.h (_mm256_loadu2_m128, _mm256_storeu2_m128,
	_mm256_loadu2_m128d, _mm256_storeu2_m128d, _mm256_loadu2_m128i,
	_mm256_storeu2_m128i): New function.

2019-08-05  Kito Cheng  <kito.cheng@sifive.com>

	* config/riscv/riscv.c (riscv_promote_function_mode): New.
	(TARGET_PROMOTE_FUNCTION_MODE): Use riscv_promote_function_mode.

2019-08-05  Alan Modra  <amodra@gmail.com>

	PR target/91349
	* config/rs6000/freebsd64.h (CPLUSPLUS_CPP_SPEC),
	(LINK_GCC_C_SEQUENCE_SPEC): Undef.

2019-08-04  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/install.texi (Prerequisites): Remove reference to Tcl 8.6
	bug that was fixed in Tcl 8.6.1.

2019-08-02  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/future.md: New file.
	* config/rs6000/rs6000.md: Include future.md.
	* config/rs6000/t-rs6000 (MD_INCLUDES): Add future.md.

2019-08-02  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* function.c (assign_parm_adjust_stack_rtl): Revise STRICT_ALIGNMENT
	check to use targetm.slow_unaligned_access instead.

	* function.c (assign_param_data_one): Remove unused data members.

2019-08-02  Steve Ellcey  <sellcey@marvell.com>

	* omp-simd-clone.c (simd_clone_adjust_return_type): Remove call to
	build_distinct_type_copy.
	(simd_clone_adjust_argument_types): Ditto.
	(simd_clone_adjust): Call build_distinct_type_copy here.
	(expand_simd_clones): Ditto.

2019-08-02  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91201
	* config/i386/sse.md (*vec_extractv16qi_zext): New insn pattern.

2019-08-02  Alexander Monakov  <amonakov@ispras.ru>

	* tree-ssa-loop-im.c (sort_bbs_in_loop_postorder_cmp): Simplify casts
	from 'const void *'.
	(sort_locs_in_loop_postorder_cmp): Likewise.

2019-08-02  Eric Botcazou  <ebotcazou@adacore.com>

	* doc/invoke.texi (hot-bb-count-fraction): Rework description.
	(hot-bb-count-ws-permille): Likewise.
	(hot-bb-frequency-fraction): Likewise.
	(unlikely-bb-count-fraction): Likewise.
	* params.def (hot-bb-count-fraction): Rework description.
	(hot-bb-count-ws-permille): Likewise.
	(hot-bb-frequency-fraction): Likewise.
	(unlikely-bb-count-fraction): Likewise.  Remove min and max values.
	* predict.c (get_hot_bb_threshold): Deal with 0 HOT_BB_COUNT_FRACTION.

2019-08-02  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91323
	* config/i386/i386-expand.c (ix86_unordered_fp_compare) <case LTGT>:
	Return false.

2019-08-02  Richard Biener  <rguenther@suse.de>

	* vec.h (vec::sort): Add gcc_qsort_r support.
	(vec::bsearch): Add an overload with gcc_qsort_r style callbacks.
	* tree-ssa-loop-im.c (sort_bbs_in_loop_postorder_cmp): Adjust
	to gcc_qsort_r style callback.
	(sort_locs_in_loop_postorder_cmp): Likewise.
	(analyze_memory_references): Use gcc_sort_r interfaces.
	(find_ref_loc_in_loop_cmp): Use new bsearch overload.

2019-08-02  Martin Liska  <mliska@suse.cz>

	PR lto/91313
	* gcc.c (driver::maybe_run_linker): Call detect_jobserver
	to detect working job server.
	(driver::detect_jobserver): Test whether jobserver
	is active from GCC driver. That will prevent situation where
	GCC is invoked from a LD plugin and the linker already uses
	file descriptors suggested by make.  That leads to a wrong
	detection.
	* gcc.h (driver): Add detect_jobserver.
	* lto-wrapper.c (jobserver_active_p): Simplify sscanf by
	not scanning for --jobserver-auth prefix.

2019-08-02  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91201
	* config/i386/i386-expand.c (ix86_expand_vector_extract): For elt == 0
	V16QImode extraction without sse4.1 try to use V4SImode lowpart
	extraction.

2019-08-01  Martin Sebor  <msebor@redhat.com>

	PR c++/90947
	* tree.c (type_initializer_zero_p): Define.
	* tree.h (type_initializer_zero_p): New function.

2019-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* cfgrtl.c (relink_block_chain): Add line returns in dump file.

2019-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* cgraph.h (cgraph_edge::maybe_hot_p): Tweak comment.
	* cgraph.c (cgraph_edge::maybe_hot_p): Likewise.  Remove useless test.
	* predict.c (maybe_hot_count_p): Likewise.
	(maybe_hot_bb_p): Tweak comment.
	(maybe_hot_edge_p): Likewise.
	(probably_never_executed): Likewise.  Minor tweak.
	(probably_never_executed_bb_p): Likewise.
	(unlikely_executed_edge_p): Likewise.
	(probably_never_executed_edge_p): Likewise.
	(optimize_function_for_size_p): Likewise.
	(optimize_function_for_speed_p): Likewise.
	(function_optimization_type): Likewise.
	(optimize_bb_for_size_p): Likewise.
	(optimize_bb_for_speed_p): Likewise.
	(bb_optimization_type): Likewise.
	(optimize_edge_for_size_p): Likewise.
	(optimize_edge_for_speed_p): Likewise.
	(optimize_insn_for_size_p): Likewise.
	(optimize_insn_for_speed_p): Likewise.
	(optimize_loop_for_size_p): Likewise.
	(optimize_loop_for_speed_p): Likewise.
	(optimize_loop_nest_for_speed_p): Likewise.
	(optimize_loop_nest_for_size_p): Likewise.
	(predictable_edge_p): Likewise.
	(handle_missing_profiles): Minor tweak.

2019-08-01  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (pcrel_external_address): Update
	comment.

2019-08-01  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/85693
	* config/i386/mmx.md (usadv8qi): New expander.

2019-08-01  Matthew Beliveau  <mbelivea@redhat.com>

	PR c++/90590
	* c-warn.c (c_do_switch_warnings): Suppress warning for enumerators
	with reserved names that are in a system header.

2019-08-01  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/mmx.md (vec_extractv2si_0): Add (r,x) alternative.
	(*vec_extractv2si_0_zext_sse4): New insn pattern.
	(*vec_extractv2si_0_zext): Ditto.
	(*vec_extractv2si_1): Add (rm,x) alternative.
	(*vec_extractv2si_1_zext): New insn pattern.
	(*vec_extractv2si_zext_mem): Add "TARGET_MMX || TARGET_MMX_WITH_SSE"
	insn constraint.

2019-08-01  Richard Biener  <rguenther@suse.de>

	* domwalk.c (bb_postorder): Remove static variable.
	(cmp_bb_postorder): Adjust.
	(sort_bbs_postorder): Adjust and use gcc_sort_r.
	(dom_walker::walk): Adjust.

2019-08-01  Alexander Monakov  <amonakov@ispras.ru>

	* sort.cc (sort_r_ctx): New struct.
	(reorder23): Make templated on context type.
	(reorder45): Ditto.
	(cmp1): Ditto.  Adjust signature.
	(netsort): Ditto.
	(mergesort): Ditto.
	[CHECKING_P] (cmp2to3): New static function.  Use it...
	(gcc_qsort) [CHECKING_P]: ...here.
	(gcc_sort_r): New function.
	* system.h (sort_r_cmp_fn): New function typedef.
	(qsort_chk): Adjust signature.
	(gcc_sort_r): Declare.
	* vec.c (qsort_chk_error): Adjust.
	(qsort_chk): Adjust.

2019-08-01  Richard Biener  <rguenther@suse.de>

	* tree-ssa-pre.c (has_abnormal_preds): Remove global var.
	(compute_antic): Localize it here.

2019-07-31  Maxim Blinov  <maxim.blinov@embecosm.com>

	* common/config/riscv/riscv-common.c: Check -march string ends
	with null.

2019-07-31  Alexander Monakov  <amonakov@ispras.ru>

	* ipa-devirt.c (type_warning_cmp): Make static.
	(decl_warning_cmp): Ditto.

2019-07-31  Peter Bergner  <bergner@linux.ibm.com>

	PR target/91050
	* config/rs6000/rs6000.opt (mdejagnu-cpu=): Delete option.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Remove
	use of deleted rs6000_dejagnu_cpu_index variable.
	* config/rs6000/rs6000.h (DRIVER_SELF_SPECS): Define.
	(SUBTARGET_DRIVER_SELF_SPECS): Likewise.
	* config/darwin.h (DRIVER_SELF_SPECS): Rename from this ...
	(SUBTARGET_DRIVER_SELF_SPECS): ...to this.
	* config/i386/i386.h (DRIVER_SELF_SPECS): Define.
	(SUBTARGET_DRIVER_SELF_SPECS): Likewise.

2019-07-31  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91280
	* tree-ssa-structalias.c (get_constraint_for_component_ref):
	Decompose MEM_REF manually for offset handling.

2019-07-31  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91293
	* tree-vect-slp.c (vect_build_slp_tree_2): Do not swap operands
	of reduction stmts.

2019-07-31  Matt Thomas  <matt@3am-software.com>
	    Nick Hudson  <nick@nthcliff.demon.co.uk>
	    Matthew Green  <mrg@eterna.com.au>
	    Maya Rashish  <coypu@sdf.org>

	* config.gcc (hppa*-*-netbsd*): New target.
	* config/pa/pa-netbsd.h: New file.
	* config/pa/pa32-netbsd.h: New file.

2019-07-31  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91201
	* config/i386/mmx.md (reduc_plus_scal_v8qi): New expander.

2019-07-31  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-valu.md
	(scatter<mode>_insn_1offset<exec_scatter>): Remove s_waitcnt.
	(scatter<mode>_insn_1offset_ds<exec_scatter>): Likewise.
	(scatter<mode>_insn_2offsets<exec_scatter>): Likewise.
	* config/gcn/gcn.c (gcn_md_reorg): Add delayeduse and reads to
	struct ilist. Add nops for delayeduse insns.
	* config/gcn/gcn.md (delayeduse): New attribute.
	(*movbi): Remove s_waitcnt from stores.
	(*mov<mode>_insn): Likewise.
	(*movti_insn): Likewise. Add delayeduse attribute.
	(sync_compare_and_swap<mode>_insn): Add delayeduse attribute.
	(atomic_store<mode>): Remove or adjust s_waitcnt.

2019-07-31  Richard Biener  <rguenther@suse.de>

	* vr-values.h (vr_values::swap_vr_value): New.
	(vr_values::free_value_range): likewise.
	* vr-values.c (vr_values::swap_vr_value): Implement.
	* gimple-ssa-evrp-analyze.h (evrp_range_analyzer::pop_value_range):
	Do not return a range or take a var.
	(evrp_range_analyzer::stack): Change back to recording a non-const
	value_range *.
	* gimple-ssa-evrp-analyze.c
	(evrp_range_analyzer::record_ranges_from_stmt): Free unused
	value-range.
	(evrp_range_analyzer::pop_to_marker): Adjust.
	(evrp_range_analyzer::push_value_range): Use new swap_vr_value.
	(evrp_range_analyzer::pop_value_range): Likewise.  Free the
	no longer needed value-range.

2019-07-31  Martin Liska  <mliska@suse.cz>

	* tree-ssa-dce.c (propagate_necessity): Delete operator can
	have size and (or) alignment as 2nd and later arguments.
	Mark all of them as necessary.

2019-07-31  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91178
	* tree-ssa-sccvn.c (vn_reference_maybe_forwprop_address):
	Use tail-recursion.

2019-07-31  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91201
	* config/i386/sse.md (reduc_plus_scal_v16qi): New expander.
	(REDUC_PLUS_MODE): Add V32QImode for TARGET_AVX and V64QImode for
	TARGET_AVX512F.
	(reduc_plus_scal_<mode>): Improve formatting by introducing
	a temporary.

2019-07-31  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64-builtins.c (enum aarch64_builtins): Add
	AARCH64_TME_BUILTIN_TSTART, AARCH64_TME_BUILTIN_TCOMMIT,
	AARCH64_TME_BUILTIN_TTEST and AARCH64_TME_BUILTIN_TCANCEL.
	(aarch64_init_tme_builtins): New.
	(aarch64_init_builtins): Call aarch64_init_tme_builtins.
	(aarch64_expand_builtin_tme): New.
	(aarch64_expand_builtin): Handle TME builtins.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins): Define
	__ARM_FEATURE_TME when enabled.
	* config/aarch64/aarch64-option-extensions.def: Add "tme".
	* config/aarch64/aarch64.h (AARCH64_FL_TME, AARCH64_ISA_TME): New.
	(TARGET_TME): New.
	* config/aarch64/aarch64.md (define_c_enum "unspec"): Add UNSPEC_TTEST.
	(define_c_enum "unspecv"): Add UNSPECV_TSTART, UNSPECV_TCOMMIT and
	UNSPECV_TCANCEL.
	(tstart, ttest, tcommit, tcancel): New instructions.
	* config/aarch64/arm_acle.h (__tstart, __tcommit): New.
	(__tcancel, __ttest): New.
	(_TMFAILURE_REASON, _TMFAILURE_RTRY, _TMFAILURE_CNCL): New macro.
	(_TMFAILURE_MEM, _TMFAILURE_IMP, _TMFAILURE_ERR): Likewise.
	(_TMFAILURE_SIZE, _TMFAILURE_NEST, _TMFAILURE_DBG): Likewise.
	(_TMFAILURE_INT, _TMFAILURE_TRIVIAL): Likewise.
	* config/arm/types.md: Add new tme type attr.
	* doc/invoke.texi: Document "tme".

2019-07-31  Joel Hutton  <Joel.Hutton@arm.com>

	* config/arm/arm_cmse.h (cmse_nonsecure_caller): Add
	warn_unused_result attribute.
	(cmse_check_address_range): Add warn_unused_result attribute.

2019-07-31  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91257
	* tree-vrp.c (union_ranges): Unify equality and less tests
	by using compare_values.  Re-order cheap tests first.

2019-07-31  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/91301
	* gimplify.c (gimplify_omp_for): If for class iterator on
	distribute parallel for there is no data sharing clause
	on inner_for_stmt, look for private clause on combined
	parallel too and if found, move it to inner_for_stmt.

2019-07-31  Richard Sandiford  <richard.sandiford@arm.com>

	* lra-int.h (lra_operand_data): Remove early_clobber field.
	(lra_insn_reg): Likewise.
	* lra.c (debug_operand_data): Update accordingly.
	(setup_operand_alternative): Likewise.
	(new_insn_reg): Likewise.  Remove early_clobber parameter.
	(collect_non_operand_hard_regs): Update call accordingly.
	Don't assign to lra_insn_reg::early_clobber.
	(add_regs_to_insn_regno_info): Remove early_clobber parameter
	and update calls to new_insn_reg.
	(lra_update_insn_regno_info): Update calls accordingly.
	* lra-constraints.c (update_and_check_small_class_inputs): Take the
	alternative number as a parameter and test whether the operand
	is earlyclobbered in that particular alternative.
	(process_alt_operands): Update call accordingly.  Use per-alternative
	checks for earyclobber here too.
	* lra-lives.c (reg_early_clobber_p): Check early_clobber_alts
	against zero for IRA_UNKNOWN_ALT.

2019-07-30  Uroš Bizjak  <ubizjak@gmail.com>

	* config/alpha/alpha.c (alpha_option_override): Quote a C type.

2019-07-30  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/thumb2.md (thumb2_movsi_insn): Adjust literal offset.
	* config/arm/vfp.md (thumb2_movsi_vfp): Likewise.

2019-07-30  Martin Liska  <mliska@suse.cz>

	PR ipa/89330
	* cgraph.c (cgraph_edge::make_direct): Use
	edge->indirect_unknown_callee as edge->resolve_speculation can
	deallocate edge which is this pointer.

2019-07-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91257
	* bitmap.c (bitmap_ior_and_compl_into): Open-code.

2019-07-30  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Document new behavior.
	* lto-wrapper.c (cpuset_popcount): New function
	is a copy of libgomp/config/linux/proc.c.
	(init_num_threads): Likewise.
	(run_gcc): Automatically detect core count for -flto.
	(jobserver_active_p): New function.

2019-07-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91257
	* bitmap.h (bitmap_ior_into_and_free): Declare.
	* bitmap.c (bitmap_list_unlink_element): Add defaulted param
	whether to add the unliked element to the freelist.
	(bitmap_list_insert_element_after): Add defaulted param for
	an already allocated element.
	(bitmap_ior_into_and_free): New function.
	* tree-ssa-structalias.c (condense_visit): Reduce the
	ponts-to and edge bitmaps of the SCC members in a
	logarithmic fashion rather than all to one.

2019-07-30  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-ssa-math-opts.c (convert_mult_to_fma): Add a mul_cond
	parameter.  When nonnull, make sure that the addition or subtraction
	has the same condition.
	(math_opts_dom_walker::after_dom_children): Try convert_mult_to_fma
	for CFN_COND_MUL too.

2019-07-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91291
	* tree-ssa-sccvn.c (rpo_elim::eliminate_push_avail): Ignore
	constant values.

2019-07-30  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/91216
	* omp-low.c (global_nonaddressable_vars): New variable.
	(use_pointer_for_field): For global decls, if they are non-addressable,
	remember it in the global_nonaddressable_vars bitmap, if they are
	addressable and in the global_nonaddressable_vars bitmap, ignore their
	TREE_ADDRESSABLE bit.
	(omp_copy_decl_2): Clear TREE_ADDRESSABLE also on private copies of
	vars in global_nonaddressable_vars bitmap.
	(execute_lower_omp): Free global_nonaddressable_vars bitmap.

	PR target/91150
	* config/i386/i386-expand.c (expand_vec_perm_blend): Change mask type
	from unsigned to unsigned HOST_WIDE_INT.  For E_V64QImode cast
	comparison to unsigned HOST_WIDE_INT before shifting it left.

2019-07-30  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (movstrict<mode>): Use register_operand
	predicate for operand 0.  Add expander condition.  Assert that
	operand 0 is a SUBREG RTX.
	(*movstrict<mode>_1): Use register_operand predicate for operand 0.
	Update operand constraints and insn condition.
	(zero_extend<mode>si2_and): Do not call gen_movstrict<mode>.
	(zero_extendqihi2_and): Do not call gen_movstrictqi.
	(*setcc_qi_slp): Use register_operand predicate for operand 0.
	Update operand 0 constraints.
	(setcc_qi_slp splitters): Use register_operand predicate for operand 0.

2019-07-29  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.h (DRIVER_SELF_SPECS): Define and emit errors
	when -m{code,data}-region are used without -mlarge.
	* config/msp430/msp430.c (msp430_option_override): Error when a
	non-default code or data region is used without -mlarge.
	(msp430_section_attr): Emit a warning and do not add upper/lower/either
	attributes when they are used without -mlarge.

2019-07-29  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	PR target/70320
	* config/msp430/msp430.h: Define ADDITIONAL_REGISTER_NAMES.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/91242
	* wide-int.h (generic_wide_int::sext_elt): New function.
	* inchash.h (hash::add_wide_int): Use it instead of elt.

2019-07-29  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-builtins.c (acle_builtin_data): Expand VAR1 to
	CODE_FOR_arm_##.
	* config/arm/arm.md (<crc_variant>): Rename to...
	(arm_<crc_variant>): ... This.
	(<cdp>): Rename to...
	(arm_<cdp>): ... This.
	(<ldc>): Rename to...
	(arm_<ldc>): ... This.
	(<stc>): Rename to...
	(arm_<stc>): ... This.
	(<mcr>): Rename to...
	(arm_<mcr>): ... This.
	(<mrc>): Rename to...
	(arm_<mrc>): ... This.
	(<mcrr>): Rename to...
	(arm_<mcrr>): ... This.
	(<mrrc>): Rename to...
	(arm_<mrrc>): ... This.

2019-07-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91257
	* tree-ssa-sccvn.h (struct vn_avail): New.
	(struct vn_ssa_aux): Add avail member.
	* tree-ssa-sccvn.c (class rpo_elim): Remove m_rpo_avail
	member, add m_avail_freelist one.
	(rpo_elim::~rpo_elim): Remove.
	(rpo_elim::eliminate_avail): Adjust to new avail tracking
	data structure.
	(rpo_elim::eliminate_push_avail): Likewise.
	(do_unwind): Likewise.
	(do_rpo_vn): Likewise.

2019-07-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91257
	* tree-vrp.c (operand_less_p): Avoid dispatching to fold for
	most cases, instead call compare_values which handles the
	symbolic ranges we handle specially.
	(compare_values_warnv): Do not call operand_less_p but open-code
	the effective fold calls.  Avoid converting so much.

2019-07-29  Martin Liska  <mliska@suse.cz>

	* tree-ssa-dce.c (eliminate_unnecessary_stmts): Do not
	remove LHS of operator new call.  It's handled latter.

2019-07-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91267
	* vr-values.c (vr_values::update_value_range): Add early return
	for effectively VARYING lattice entry.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	PR debug/86638
	* tree-ssa-dce.c (keep_all_vdefs_p): New function.
	(mark_stmt_if_obviously_necessary): Mark all stmts with vdefs as
	necessary if keep_all_vdefs_p is true.
	(mark_aliased_reaching_defs_necessary): Add a gcc_checking_assert
	that keep_all_vdefs_p is false.
	(mark_all_reaching_defs_necessary): Likewise.
	(propagate_necessity): Skip the vuse scan if keep_all_vdefs_p is true.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	* common.opt (Og): Change the initial value of flag_dse to 0.
	* opts.c (default_options_table): Move OPT_ftree_dse from
	OPT_LEVELS_1_PLUS to OPT_LEVELS_1_PLUS_NOT_DEBUG.  Also add
	OPT_fdse to OPT_LEVELS_1_PLUS_NOT_DEBUG.  Put the OPT_ftree_pta
	entry before the OPT_ftree_sra entry.
	* doc/invoke.texi (Og): Add -fdse and -ftree-dse to the list
	of flags disabled by Og.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-cfg.c (execute_fixup_cfg): Don't delete stores to write-only
	variables for -Og.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/sourcebuild.texi (check-function-bodies): Document.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	* simplify-rtx.c (simplify_const_unary_operation): Fold a
	VEC_DUPLICATE of a fixed-length vector even if the result
	is variable-length.  Likewise fold a duplicate of a
	variable-length vector if the variable-length vector is
	itself a duplicate of a fixed-length sequence.
	(test_vector_ops_duplicate): Test more cases.

2019-07-29  Richard Sandiford  <richard.sandiford@arm.com>

	* vector-builder.h (vector_builder): Add a shape template parameter.
	(vector_builder::new_unary_operation): New function, generalizing
	the old tree_vector_builder function.
	(vector_builder::new_binary_operation): Likewise.
	(vector_builder::binary_encoded_nelts): Likewise.
	* int-vector-builder.h (int_vector_builder): Update template
	parameters to vector_builder.
	(int_vector_builder::shape_nelts): New function.
	* rtx-vector-builder.h (rtx_vector_builder): Update template
	parameters to vector_builder.
	(rtx_vector_builder::shape_nelts): New function.
	(rtx_vector_builder::nelts_of): Likewise.
	(rtx_vector_builder::npatterns_of): Likewise.
	(rtx_vector_builder::nelts_per_pattern_of): Likewise.
	* tree-vector-builder.h (tree_vector_builder): Update template
	parameters to vector_builder.
	(tree_vector_builder::shape_nelts): New function.
	(tree_vector_builder::nelts_of): Likewise.
	(tree_vector_builder::npatterns_of): Likewise.
	(tree_vector_builder::nelts_per_pattern_of): Likewise.
	* tree-vector-builder.c (tree_vector_builder::new_unary_operation)
	(tree_vector_builder::new_binary_operation): Delete.
	(tree_vector_builder::binary_encoded_nelts): Likewise.
	* simplify-rtx.c: Include rtx-vector-builder.h.
	(distributes_over_addition_p): New function.
	(simplify_const_unary_operation)
	(simplify_const_binary_operation): Generalize handling of vector
	constants to include variable-length vectors.
	(test_vector_ops_series): Add more tests.

2019-07-28  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/91222
	* ipa-devirt.c (warn_types_mismatch): Compare indentifiers
	than INDENTIFIER_POINTER.

2019-07-28  Martin Liska  <mliska@suse.cz>

	PR ipa/89330
	* cgraph.c (symbol_table::create_edge): Always allocate
	a cgraph_edge.
	(symbol_table::free_edge): Store summary_id to
	edge_released_summary_ids if != -1;
	* cgraph.h (NEXT_FREE_NODE): Remove.
	(SET_NEXT_FREE_NODE): Likewise.
	(NEXT_FREE_EDGE): Likewise.
	(symbol_table::release_symbol): Store summary_id to
	cgraph_released_summary_ids if != -1;
	(symbol_table::allocate_cgraph_symbol): Always allocate
	a cgraph_node.

2019-07-28  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000-call.c (rs6000_output_mi_thunk): Use
	gen_sibcall.

2019-07-28  Alan Modra  <amodra@gmail.com>

	PR target/91135
	* config/rs6000/linux.h (GNU_USER_TARGET_D_OS_VERSIONS): Don't
	define.
	* config/rs6000/linux64.h (TARGET_OS_CPP_BUILTINS): Invoke
	GNU_USER_TARGET_OS_CPP_BUILTINS for aixdesc abi.
	(GNU_USER_TARGET_D_OS_VERSIONS): Don't define.

2019-07-28  Alan Modra  <amodra@gmail.com>

	PR target/91050
	* config/rs6000/sysv4.h (ASM_DEFAULT_SPEC): Modify if -m64.
	* config/rs6000/default64.h (ASM_DEFAULT_SPEC): Define.
	* config/rs6000/freebsd64.h (ASM_DEFAULT_SPEC): Don't define.
	* config/rs6000/linux64.h (ASM_DEFAULT_SPEC): Likewise.
	* config/rs6000/rtems.h (ASM_DEFAULT_SPEC): Likewise.
	* config/rs6000/rs6000.h (ASM_DEFAULT_EXTRA): Define and use
	in asm_default spec.
	* config/rs6000/eabialtivec.h (ASM_DEFAULT_EXTRA): Redefine.
	* config/rs6000/linuxaltivec.h (ASM_DEFAULT_EXTRA): Redefine.

2019-07-28  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/include/gpl_v3.texi (Copying): Use https for www.gnu.org.

2019-07-26  Tamar Christina  <tamar.christina@arm.com>

	PR target/89517
	* config.gcc: Relax parsing of AARCH64_OPT_EXTENSION.
	* config/aarch64/aarch64-option-extensions.def: Add new comments
	and restore easier to read options.

2019-07-26  Tamar Christina  <tamar.christina@arm.com>

	* convert.c (convert_to_real_1): Move part of conversion code...
	* match.pd: ...To here.

2019-07-26  Martin Jambor  <mjambor@suse.cz>

	PR ipa/89330
	* ipa-inline-transform.c (check_speculations_1): New function.
	(push_all_edges_in_set_to_vec): Likewise.
	(check_speculations): Use check_speculations_1, new parameter
	new_edges.
	(inline_call): Pass new_edges to check_speculations.
	* ipa-inline.c (add_new_edges_to_heap): Assert edge_callee is not
	NULL.
	(speculation_useful_p): Early return true if edge is inlined, remove
	later checks for inline_failed.

2019-07-25  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/91223
	* lra-constraints.c (process_alt_operands): Fail for unsuccessful
	matching with INOUT operand.

2019-07-25  Eric Botcazou  <ebotcazou@adacore.com>

	* stmt.c (expand_case): Try to narrow the index type if it's larger
	than a word.  Tidy up.

2019-07-25  Eric Botcazou  <ebotcazou@adacore.com>

	* cif-code.def (NEVER_CALL): New code.
	* ipa-inline.c (want_inline_small_function_p): Fix formatting issues.
	Set the failure to CIF_NEVER_CALL if the IPA count is zero.

2019-07-25  Wilco Dijkstra  <wdijkstr@arm.com>

	* config/arm/thumb2.md (thumb2_movsi_insn): Fix load/store low reg.
	* config/arm/vfp.md (thumb2_movsi_vfp): Likewise.

2019-07-23  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-devirt.c (add_type_duplicate): Fix return value.

2019-07-25  Richard Biener  <rguenther@suse.de>

	* tree-vrp.c (extract_range_from_multiplicative_op): Add
	type parameter and use it instead of guessing expression
	type from the first operand.
	(extract_range_from_binary_expr): Pass expr_type down.

2019-07-25  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm.md (SATrev): Change to code attribute.
	(*satsi_<SAT:code>): Adjust for the above.
	(*satsi_<SAT:code>_shift): Likewise.

2019-07-25  Richard Biener  <rguenther@suse.de>

	* gimple-loop-versioning.cc (loop_versioning::prune_loop_conditions):
	Make value_range * temporary const.
	* gimple-ssa-evrp-analyze.c (evrp_range_analyzer::try_find_new_range):
	Likewise.
	(evrp_range_analyzer::record_ranges_from_): Likewise.
	(evrp_range_analyzer::pop_value_range): Return a const value_range *,
	deal with having recorded a const one.
	* gimple-ssa-evrp-analyze.h (evrp_range_analyzer::get_value_range):
	Return a const value_range *.
	(evrp_range_analyzer::pop_value_range): Likewise.
	(evrp_range_analyzer::stack): Record const value_range *s.
	* gimple-ssa-evrp.c (evrp_dom_walker::before_dom_children):
	Adjust.
	* gimple-ssa-sprintf.c (get_int_range): Likewise.
	(format_integer): Likewise.
	(sprintf_dom_walker::handle_gimple_call): Likewise.
	* tree-ssa-dom.c (simplify_stmt_for_jump_threading): Likewise.
	* tree-vrp.c (vrp_prop::set_def_to_varying): Add.
	(vrp_prop::get_value_range): Adjust.
	(vrp_prop::vrp_initialize): Use set_def_to_varying instead of
	modifying the lattice in-place.
	(vrp_prop::visit_stmt): Likewise.
	* vr-values.c (vr_values::get_lattice_entry): New private method.
	(vr_values::get_value_range): Wrap it and return a const
	value_range *.
	(vr_values::set_def_to_varying): New.
	(vr_values::set_defs_to_varying): Use it.
	(vr_values::update_value_range): Likewise.
	(vr_values::vrp_stmt_computes_nonzero): Adjust.
	(values::op_with_constant_singleton_va): Likewise.
	(vr_values::extract_range_for_var_from_co): Likewise.
	(vr_values::extract_range_from_ssa_name): Likewise.
	(vr_values::extract_range_from_cond_expr): Likewise.
	(vr_values::extract_range_basic): Likewise.
	(compare_ranges): Take const value_range *, adjust.
	(compare_range_with_value): Likewise.
	(vrp_valueize): Adjust.
	(vrp_valueize_1): Likewise.
	(vr_values::get_vr_for_comparison): Return a const value_range *.
	(vr_values::compare_name_with_value): Adjust.
	(vr_values::compare_names): Likewise.
	(vr_values::vrp_evaluate_conditional_warnv_with_ops_using_ranges):
	Likewise.
	(vr_values::vrp_evaluate_conditional): Likewise.
	(find_case_label_ranges): Take a const value_range *.
	(vr_values::vrp_visit_switch_stmt): Adjust.
	(vr_values::extract_range_from_phi_node): Likewise.
	(vr_values::simplify_div_or_mod_using_ran): Likewise.
	(vr_values::simplify_abs_using_ranges): Likewise.
	(test_for_singularity): Take a const value_range *.
	(range_fits_type_p): Likewise.
	(vr_values::simplify_cond_using_ranges_1): Adjust.
	(vr_values::simplify_cond_using_ranges_2): Likewise.
	(vr_values::simplify_switch_using_ranges): Likewise.
	(vr_values::simplify_float_conversion_usi): Likewise.
	(vr_values::two_valued_val_range_p): Likewise.
	* vr-values.h (vr_values::get_value_range): Return a const
	value_range *.
	(vr_values::set_def_to_varying): New.
	(vr_values::get_lattice_entry): New private method.
	(vr_values::get_vr_for_comparison): Return a const value_range *.

2019-07-25  Martin Liska  <mliska@suse.cz>
	    Dominik Infuhr  <dominik.infuehr@theobroma-systems.com>

	PR c++/23383
	* common.opt: Add -fallocation-dce
	* gimple.c (gimple_call_operator_delete_p): New.
	* gimple.h (gimple_call_operator_delete_p): Likewise.
	* tree-core.h (enum function_decl_type): Add OPERATOR_DELETE.
	* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Handle
	DECL_IS_OPERATOR_DELETE_P.
	(mark_all_reaching_defs_necessary_1): Likewise.
	(propagate_necessity): Likewise.
	(eliminate_unnecessary_stmts): Handle
	gimple_call_operator_delete_p.
	* tree-streamer-in.c (unpack_ts_function_decl_value_fields):
	Add packing of OPERATOR_DELETE.
	* tree-streamer-out.c (pack_ts_function_decl_value_fields):
	Similarly here.
	* tree.h (DECL_IS_OPERATOR_DELETE_P): New.
	(DECL_SET_IS_OPERATOR_DELETE): New.
	(DECL_IS_REPLACEABLE_OPERATOR_NEW_P): Likewise.

2019-07-25  Martin Liska  <mliska@suse.cz>

	* calls.c (maybe_warn_alloc_args_overflow): Use new macros
	(e.g. DECL_SET_LAMBDA_FUNCTION and DECL_LAMBDA_FUNCTION_P).
	* coverage.c (coverage_begin_function): Likewise.
	* fold-const.c (tree_expr_nonzero_warnv_p): Likewise.
	* gimple.c (gimple_call_nonnull_result_p): Likewise.
	* ipa-icf.c (sem_item::compare_referenced_symbol_properties): Likewise.
	(sem_item::hash_referenced_symbol_properties): Likewise.
	* lto-streamer-out.c (hash_tree): Likewise.
	* predict.c (expr_expected_value_1): Likewise.
	* tree-inline.c (expand_call_inline): Likewise.
	* tree-streamer-in.c (unpack_ts_function_decl_value_fields): Likewise.
	* tree-streamer-out.c (pack_ts_function_decl_value_fields): Likewise.
	* tree-core.h (enum function_decl_type): New enum.
	(struct tree_function_decl): Remove operator_new_flag and lambda_function.
	* tree.h (FUNCTION_DECL_DECL_TYPE): New.
	(set_function_decl_type): Likewise.
	(DECL_IS_OPERATOR_NEW_P): New.
	(DECL_SET_IS_OPERATOR_NEW): Likewise.
	(DECL_LAMBDA_FUNCTION): Likewise.
	(DECL_LAMBDA_FUNCTION_P): Likewise.
	(DECL_IS_OPERATOR_NEW): Remove.
	(DECL_SET_LAMBDA_FUNCTION): Likewise.

2019-07-25  Xiong Hu Luo  <luoxhu@linux.ibm.com>

	* ipa-profile.c (get_most_common_single_value): Use
	get_nth_most_common_value.
	* profile.c (sort_hist_value): New function.
	(compute_value_histograms): Call sort_hist_value to sort the
	values after loading from disk.
	* value-prof.c (get_most_common_single_value): Rename to ...
	get_nth_most_common_value.  Add input params n, return
	the n_th value and count.
	(gimple_divmod_fixed_value_transform): Use
	get_nth_most_common_value.
	(gimple_ic_transform): Likewise.
	(gimple_stringops_transform): Likewise.
	* value-prof.h (get_most_common_single_value): Add input params
	n, default to 0.

2019-07-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91236
	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Fix
	size of CONSTRUCTOR write.  Fix buffer size we pass to
	native_encode_expr.

2019-07-24  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config.gcc (msp430*-*-*): Fix non-GNU style in r273774.
	* config/msp430/msp430.h (ENDFILE_SPEC): Fix non-GNU style in
	r273773.

2019-07-24  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config.gcc (msp430*-*-*): Enable initfini_array by default unless
	explicitly disabled with --disable-initfini-array.

2019-07-24  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.h (ENDFILE_SPEC): Wrap uses of crtn*.o in
	if-exists.

2019-07-24  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/91183
	PR tree-optimization/86688
	* builtins.c (compute_objsize): Handle MEM_REF.
	* tree-ssa-strlen.c (class ssa_name_limit_t): New.
	(get_min_string_length): Remove.
	(count_nonzero_bytes): New function.
	(handle_char_store): Rename...
	(handle_store): to this.  Handle multibyte stores via integer types.
	(strlen_check_and_optimize_stmt): Adjust conditional and the called
	function name.

2019-07-24  Martin Sebor  <msebor@redhat.com>

	PR driver/80545
	* diagnostic.c (diagnostic_classify_diagnostic): Use lang_mask.
	(diagnostic_report_diagnostic): Same.
	* diagnostic.h (diagnostic_context::option_enabled): Add an argument.
	(diagnostic_context::lang_mask): New data member.
	* ipa-pure-const.c (suggest_attribute): Use
	lang_hooks.option_lang_mask ().
	* opts-common.c (option_enabled): Handle new argument.
	(get_option_state): Pass an additional argument.
	* opts.c (print_filtered_help): Print supported languages for
	unsupported options.  Adjust printing of current state.
	* opts.h (option_enabled): Add argument.
	* toplev.c (print_switch_values): Use lang_mask.
	(general_init): Set global_dc->lang_mask.

2019-07-24  Iain Sandoe  <iain@sandoe.co.uk>

	PR bootstrap/87030
	* config/i386/darwin.h (REAL_LIBGCC_SPEC): Revert change from r273749.

2019-07-24  Giuliano Belinassi  <giuliano.belinassi@usp.br>

	* cgraphunit.c (symbol_table::compile): Start and stop
	TV_CGRAPH_IPA_PASSES and TV_CGRAPH_FUNC_EXPANSION timers.
	* timevar.def (TV_CGRAPH_IPA_PASSES, TV_CGRAPH_FUNC_EXPANSION): New.

2019-07-24  Oliver Browne  <oliverbrowne62@gmail.com>

	* gimplify.c (flag_instrument_functions_exclude_p): Include
	namespace/class information in the printable name.
	* opts.c (add_comma_separated_to_vector): Add NUL terminator
	to tokens entered into the vector.

2019-07-24  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-nested.c (build_simple_mem_ref_notrap): New function.
	(get_static_chain): Call it instead of build_simple_mem_ref.
	(get_frame_field): Likewise.
	(get_nonlocal_debug_decl): Likewise.
	(convert_nonlocal_reference_op): Likewise.

2019-07-24  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (arc_output_function_epilogue): Delete
	declaration.
	(arc_compute_frame_size): Millicode is disabled when compiling
	ISR.
	(arc_return_address_register): Likewise.
	(arc_compute_function_type): Likewise.
	(arc_compute_frame_size): Likewise.
	(secondary_reload_info): Likewise.
	(arc_get_unalign): Likewise.
	(arc_can_use_return_insn): Declare.
	* config/arc/arc.c (AUX_LP_START): Define
	(AUX_LP_END): Likewise.
	(arc_frame_info): Update gmask member to 64-bit datum.
	(GMASK_LEN): Update.
	(arc_compute_function_type): Make it static, move it forward.
	(arc_must_save_register): Update, consider the extra regs.
	(arc_compute_millicode_save_restore_regs): Update to use the 64
	bit gmask.
	(arc_compute_frame_size): Likewise.
	(arc_enter_leave_p): Likewise.
	(arc_save_callee_saves): Likewise.
	(arc_restore_callee_saves): Likewise.
	(arc_save_callee_enter): Likewise.
	(arc_restore_callee_leave): Likewise.
	(arc_save_callee_milli): Likewise.
	(arc_restore_callee_milli): Likewise.
	(arc_expand_prologue): Add new interrupt handling.
	(arc_return_address_register): Make it static, move it forward.
	(arc_expand_epilogue): Add new interrupt handling.
	(arc_get_unalign): Delete.
	(arc_epilogue_uses): Make sure we do not remove the extra
	saved/restored registers when interrupt.
	(arc_can_use_return_insn): New function.
	(push_reg): Likewise.
	(pop_reg): Likewise.
	(arc_save_callee_saves): Add ZOL and FPX aux registers saving
	procedures.
	(arc_restore_callee_saves): Likewise, but restoring.
	* config/arc/arc.md (VUNSPEC_ARC_ARC600_RTIE): Define.
	(R33_REG): Likewise.
	(R34_REG): Likewise.
	(R35_REG): Likewise.
	(R36_REG): Likewise.
	(R37_REG): Likewise.
	(R38_REG): Likewise.
	(R39_REG): Likewise.
	(R45_REG): Likewise.
	(R46_REG): Likewise.
	(R47_REG): Likewise.
	(R48_REG): Likewise.
	(R49_REG): Likewise.
	(R50_REG): Likewise.
	(R51_REG): Likewise.
	(R52_REG): Likewise.
	(R53_REG): Likewise.
	(R54_REG): Likewise.
	(R55_REG): Likewise.
	(R56_REG): Likewise.
	(R58_REG): Likewise.
	(type): Add rtie attribute.
	(in_call_delay_slot): Use RETURN_ADDR_REGNUM.
	(movsi_insn): Accept moves to lp_count.
	(rtie): Update pattern.
	(simple_return): Simplify it, don't use this pattern as a return
	from an interrupt.
	(arc600_rtie): New pattern.
	(p_return_i): Clean up.
	(return): Likewise.
	* config/arc/builtins.def (rtie): Only available for non ARC6xx
	family CPUs.
	* config/arc/predicates.md (move_src_operand): Consider lp_count
	as a register.

2019-07-24  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/predicates.md (addv_const_operand): New predicate.
	* config/s390/s390-modes.def (CCO): New condition code mode.
	* config/s390/s390.c (s390_match_ccmode_set): Handle E_CCOmode.
	(s390_branch_condition_mask): Likewise.
	* config/s390/s390.md ("addv<mode>4", "subv<mode>4")
	("mulv<mode>4"): New expanders.
	("*addv<mode>3_ccoverflow", "*addv<mode>3_ccoverflow_const")
	("*subv<mode>3_ccoverflow", "*mulv<mode>3_ccoverflow"): New
	pattern definitions.

2019-07-24  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR middle-end/91166
	* match.pd (vec_perm_expr(v, v, mask) -> v): New pattern.
	(define_predicates): Add entry for uniform_vector_p.
	(vec_same_elem_p): New match pattern.

2019-07-24  Iain Sandoe  <iain@sandoe.co.uk>

	PR bootstrap/87030
	* config/i386/darwin.h (REAL_LIBGCC_SPEC): Move from here...
	* config/i386/darwin32-biarch.h .. to here.
	* config/i386/darwin64-biarch.h: Adjust comments.
	* config/rs6000/darwin32-biarch.h: Likewise.
	* config/rs6000/darwin64-biarch.h: Likewise.
	* config.gcc: Missed commit from r273746
	(*-*-darwin*): Don't include CPU t-darwin here.
	(i[34567]86-*-darwin*): Adjust to use biarch files. Produce
	an error message if i686-darwin configuration is attempted for
	Darwin >= 18.

2019-07-23  Iain Sandoe  <iain@sandoe.co.uk>

	PR bootstrap/87030
	* config.gcc (*-*-darwin*): Don't include CPU t-darwin here.
	(i[34567]86-*-darwin*): Adjust to use biarch files. Produce
	an error message if i686-darwin configuration is attempted for
	Darwin >= 18.
	(x86_64-*-darwin*): Switch to single multilib for Darwin >= 18.
	(powerpc-*-darwin*): Use biarch files where needed.
	(powerpc64-*-darwin*): Likewise.
	* config/i386/darwin.h (REAL_LIBGCC_SPEC): Move to new biarch file.
	(DARWIN_ARCH_SPEC, DARWIN_SUBARCH_SPEC): Revise for default single
	arch case.
	* config/i386/darwin32-biarch.h: New.
	* config/i386/darwin64.h: Rename.
	* config/i386/darwin64-biarch.h: To this.
	* config/i386/t-darwin: Rename.
	* config/i386/t-darwin32-biarch: To this.
	* config/i386/t-darwin64: Rename.
	* config/i386/t-darwin64-biarch: To this.
	* config/rs6000/darwin32-biarch.h: New.
	* config/rs6000/darwin64.h: Rename.
	* config/rs6000/darwin64-biarch.h: To this.
	(DARWIN_ARCH_SPEC, DARWIN_SUBARCH_SPEC): Revise for default single
	arch case.
	* config/rs6000/t-darwin8: Rename.
	* config/rs6000/t-darwin32-biarch: To this.
	* config/rs6000/t-darwin64 Rename.
	* config/rs6000/t-darwin64-biarch: To this.

2019-07-23  Martin Sebor  <msebor@redhat.com>

	* configure.ac (ACX_PROG_CXX_WARNING_OPTS): Revert r273311.

2019-07-23  Vladislav Ivanishin  <vlad@ispras.ru>

	* gdbinit.in (reload-gdbhooks): New command with an attached doc string.
	(rh): New alias for it.

2019-07-23  Vladislav Ivanishin  <vlad@ispras.ru>

	* gdbhooks.py: Pass replace=True to
	gdb.printing.register_pretty_printer.

2019-07-23  Richard Biener  <rguenther@suse.de>

	PR debug/91231
	* lto-streamer-in.c (input_function): Drop inline-entry markers
	that ended up with an unknown location block.

2019-07-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83518
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Handle aggregate
	init from a constant even when partial defs are already recorded.

2019-07-23  Jan Hubicka  <hubicka@ucw.cz>

	* i386-common.c: Use PROCESSOR_ZNVER2 scheduler for znver2.
	* config/i386/znver1.md: Enable patterns for znver2 and add store
	variants which use extra AGU unit.

2019-07-23  Jan Hubicka  <hubicka@ucw.cz>

	* config/i386/i386-options.c (ix86_option_override_internal): Default
	PARAM_AVOID_FMA_MAX_BITS to 256 for znver2.
	* config/i386/x86-tune.def (X86_TUNE_AVOID_256FMA_CHAINS): Set
	for ZNVER2.

2019-07-23  Jan Hubicka  <hubicka@ucw.cz>

	* config/i386/x86-tune-costs.h (znver2_memcpy): Update.
	(znver2_costs): Update 256 bit SSE costs and multiplication.

2019-07-23  Jan Beulich  <jbeulich@suse.com>

	* config/i386/sse.md (<avx512>_cvtmask2<ssemodesuffix><mode>):
	Require only AVX512F.
	(*<avx512>_cvtmask2<ssemodesuffix><mode>): Likewise.  Add
	alternative expanding to vpternlog.

2019-07-23  Martin Liska  <mliska@suse.cz>

	* dwarf2out.c (gen_producer_string): Canonize -flto=N
	to -flto in dwarf producer string.

2019-07-23  Richard Biener  <rguenther@suse.de>

	* tree-cfg.c (label_for_bb): Remove global var.
	(main_block_label): Take label_for_bb as argument.
	(cleanup_dead_labels_eh): Likewise, adjust.
	(cleanup_dead_labels): Adjust.

2019-07-22  Paul A. Clarke  <pc@us.ibm.com>

	* doc/extend.texi (Basic PowerPC Built-in Functions Available on all
	Configurations): Add documentation for __builtin_mtfsf.

2019-07-22  Ilia Diachkov  <ilia.diachkov@optimitech.com>

	* config/riscv/riscv-opts.h (struct riscv_align_data): New.
	* config/riscv/riscv.c (riscv_constant_alignment): Use
	riscv_align_data_type.
	* config/riscv/riscv.h (RISCV_EXPAND_ALIGNMENT): New.
	(DATA_ALIGNMENT): Use RISCV_EXPAND_ALIGNMENT.
	(LOCAL_ALIGNMENT): Use RISCV_EXPAND_ALIGNMENT.
	* config/riscv/riscv.opt (malign-data): New.
	* doc/invoke.texi (RISC-V Options): Document -malign-data=.

2019-07-02  Giuliano Belinassi  <giuliano.belinassi@usp.br>

	* cgraph.c (dump_graphviz): New function.
	* cgraph.h (dump_graphviz): New function.
	* symtab.c (dump_graphviz): New function.

2019-07-22  Sylvia Taylor  <sylvia.taylor@arm.com>

	* config/aarch64/aarch64-simd.md
	(*aarch64_simd_sra<mode>): New.
	* config/aarch64/iterators.md
	(SHIFTRT): New iterator.
	(sra_op): New attribute.

2019-07-22  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_preserve_reg_p): Don't save
	callee-saved regs R4->R10 in an interrupt function that calls another
	function.

2019-07-22  Paul A. Clarke  <pc@us.ibm.com>

	* config/rs6000/smmintrin.h (_mm_blend_epi16): New.
	(_mm_blendv_epi8): New.

2019-07-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91221
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Appropriately
	restrict partial-def handling of empty constructors and
	memset to refs with known offset.

2019-07-22  Jan Beulich  <jbeulich@suse.com>

	* config/i386/sse.md (ternlogsuffix): New.
	(one_cmpl<mode>2): Don't force CONSTM1_RTX into a register when
	AVX512F is in use.
	(<mask_codefor>one_cmpl<mode>2<mask_name>): New.

2019-07-22  Martin Liska  <mliska@suse.cz>

	* config/avr/avr.c (avr_asm_output_aligned_decl_common): Update
	comment.
	* toplev.c (compile_file): Do not emit __gnu_lto_v1 symbol.

2019-07-22  Martin Liska  <mliska@suse.cz>

	* lto-section-in.c (lto_get_section_data):
	Use new function get_compression.
	* lto-streamer-out.c (produce_lto_section): Use
	set_compression to encode compression algorithm.
	* lto-streamer.h (struct lto_section): Do not
	use bitfields in the format.

2019-07-22  Martin Liska  <mliska@suse.cz>

	PR driver/91172
	* opts-common.c (decode_cmdline_option): Decode
	argument of -Werror and check it for a wrong language.
	* opts-global.c (complain_wrong_lang): Remove such case.

2019-07-22  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (prepare_move_operands): Always use an
	intermediate register when storing a TLS symbols.

2019-07-22  Stafford Horne  <shorne@gmail.com>

	* config/or1k/or1k.c (or1k_expand_compare): Check for int before
	force_reg.

2019-07-22  Stafford Horne  <shorne@gmail.com>

	* config.gcc (or1k*-*-*): Add mhard-float, mdouble-float, msoft-float
	and munordered-float validations.
	* config/or1k/constraints.md (d): New register constraint.
	* config/or1k/predicates.md (fp_comparison_operator): New.
	* config/or1k/or1k.c (or1k_print_operand): Add support for printing 'd'
	operands.
	(or1k_expand_compare): Normalize unordered comparisons.
	* config/or1k/or1k.h (reg_class): Define DOUBLE_REGS.
	(REG_CLASS_NAMES): Add "DOUBLE_REGS".
	(REG_CLASS_CONTENTS): Add contents for DOUBLE_REGS.
	* config/or1k/or1k.md (type): Add fpu.
	(fpu): New instruction reservation.
	(F, f, fr, fi, FI, FOP, fop): New.
	(<fop><F:mode>3): New ALU instruction definition.
	(float<fi><F:mode>2): New conversion instruction definition.
	(fix_trunc<F:mode><fi>2): New conversion instruction definition.
	(fpcmpcc): New code iterator.
	(*sf_fp_insn): New instruction definition.
	(cstore<F:mode>4): New expand definition.
	(cbranch<F:mode>4): New expand definition.
	* config/or1k/or1k.opt (msoft-float, mhard-float, mdouble-float,
	munordered-float): New options.
	* doc/invoke.texi: Document msoft-float, mhard-float, mdouble-float and
	munordered-float.

2019-07-22  Stafford Horne  <shorne@gmail.com>

	* config.gcc (or1k*-*-*): Add mrori and mror to validation.
	* doc/invoke.texi (OpenRISC Options): Add mrori option, rewrite all
	documenation to be more clear.
	* config/or1k/elf.opt (mboard=, mnewlib): Rewrite documentation to be
	more clear.
	* config/or1k/or1k.opt (mrori): New option.
	(mhard-div, msoft-div, mhard-mul, msoft-mul, mcmov, mror, msext,
	msfimm, mshftimm): Rewrite documentation to be more clear.
	* config/or1k/or1k.md (insn_support): Add ror and rori.
	(enabled): Add conditions for ror and rori.
	(rotrsi3): Replace condition for shftimm with ror and rori.

2019-07-22  Stafford Horne  <shorne@gmail.com>

	PR target/90363
	* config/or1k/or1k.md (zero_extend<mode>si2): Update predicate.
	(extend<mode>si2): Update predicate.
	* config/or1k/predicates.md (volatile_mem_operand): New.
	(reg_or_mem_operand): New.

2019-07-21  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (TARGET_NO_PROTOTYPE): Move from here...
	* config/rs6000/rs6000-call.c: ... to here.

2019-07-20  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/predicates.md (offsettable_mem_operand): Allow volatile
	memory.

2019-07-20  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/predicates.md (input_operand): Allow volatile memory.

2019-07-20  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/predicates.md (lwa_operand): Allow volatile memory.

2019-07-20  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/predicates.md (volatile_mem_operand): Modernize syntax.
	(any_memory_operand): New predicate.
	(reg_or_mem_operand): Use it.

2019-07-20  Jakub Jelinek  <jakub@redhat.com>

	PR target/91204
	* optabs.c (expand_unop): As fallback, expand ~op0 as op0 ^ -1.

2019-07-20  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.h (hppa_profile_hook): Delete declaration.
	* config/pa/pa-protos.h (hppa_profile_hook): Add declaration.

2019-07-20  Jakub Jelinek  <jakub@redhat.com>

	* tree.def (OMP_LOOP): New tree code.
	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE_BIND.
	(enum omp_clause_bind_kind): New enum.
	(struct tree_omp_clause): Add subcode.bind_kind.
	* tree.h (OMP_LOOP_CHECK): Rename to ...
	(OMP_LOOPING_CHECK): ... this.
	(OMP_FOR_BODY, OMP_FOR_CLAUSES, OMP_FOR_INIT, OMP_FOR_COND,
	OMP_FOR_INCR, OMP_FOR_PRE_BODY, OMP_FOR_ORIG_DECLS): Use
	OMP_LOOPING_CHECK instead of OMP_LOOP_CHECK.
	(OMP_CLAUSE_BIND_KIND): Define.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add
	bind clause entries.
	(walk_tree_1): Handle OMP_CLAUSE_BIND.
	* tree-pretty-print.c (dump_omp_clause): Likewise.
	(dump_generic_node): Handle OMP_LOOP.
	* gimplify.c (enum omp_region_type): Add ORT_IMPLICIT_TARGET.
	(in_omp_construct): New variable.
	(is_gimple_stmt): Handle OMP_LOOP.
	(gimplify_scan_omp_clauses): For lastprivate don't set
	check_non_private if code == OMP_LOOP.  For reduction clause
	on OMP_LOOP combined with parallel or teams propagate as shared
	on the combined construct.  Handle OMP_CLAUSE_BIND.
	(gimplify_adjust_omp_clauses): Handle OMP_CLAUSE_BIND.
	(gimplify_omp_for): Pass OMP_LOOP instead of OMP_{FOR,DISTRIBUTE}
	for constructs from a loop construct to gimplify_scan_omp_clauses.
	Don't predetermine iterator linear on OMP_SIMD from loop construct.
	(replace_reduction_placeholders, gimplify_omp_loop): New functions.
	(gimplify_omp_workshare): Use ORT_IMPLICIT_TARGET instead of trying
	to match the implicit ORT_TARGET construct around whole body.
	Temporarily clear in_omp_construct when processing body.
	(gimplify_expr): Handle OMP_LOOP.  For OMP_MASTER, OMP_TASKGROUP
	etc. temporarily set in_omp_construct when processing body.
	(gimplify_body): Create ORT_IMPLICIT_TARGET instead of ORT_TARGET.
	* omp-low.c (struct omp_context): Add loop_p.
	(build_outer_var_ref): Treat ctx->loop_p similarly to simd construct
	in that the original var might be private.
	(scan_sharing_clauses): Handle OMP_CLAUSE_BIND.
	(check_omp_nesting_restrictions): Adjust nesting restrictions for
	addition of loop construct.
	(scan_omp_1_stmt): Allow setjmp inside of loop construct.

	* omp-low.c (lower_rec_input_clauses): Don't force simd arrays for
	lastprivate non-addressable iterator of a collapse(1) simd.

2019-07-17  Bill Seurer  <seurer@linux.vnet.ibm.com>

	* config/rs6000/rs6000-call.c (HAVE_AS_GNU_ATTRIBUTE): define value
	as in rs6000.c.

2019-07-19  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h (DRIVER_SELF_SPECS): Ignore X and Mach specs which
	refer to default conditions.  Warn for the 'y' spec which is ignored
	by current linkers.

2019-07-19  Bill Seurer  <seurer@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (builtin_description, cpu_is_info,
	cpu_supports_info, builtin_hash_struct, builtin_hasher,
	builtin_hash_table, rs6000_builtin_info_type, rs6000_builtin_info,
	rs6000_aggregate_candidate, rs6000_discover_homogeneous_aggregate,
	rs6000_return_in_memory, rs6000_return_in_msb, call_ABI_of_interest,
	init_cumulative_args, rs6000_promote_function_mode,
	rs6000_must_pass_in_stack, is_complex_IBM_long_double,
	abi_v4_pass_in_fpr, rs6000_function_arg_padding,
	rs6000_function_arg_boundary, rs6000_parm_offset,
	rs6000_parm_start, rs6000_arg_size,
	rs6000_darwin64_record_arg_advance_flush,
	rs6000_darwin64_record_arg_advance_recurse,
	rs6000_darwin64_struct_check_p, rs6000_function_arg_advance_1,
	rs6000_function_arg_advance, rs6000_darwin64_record_arg_flush,
	rs6000_darwin64_record_arg_recurse, rs6000_darwin64_record_arg,
	rs6000_mixed_function_arg, rs6000_psave_function_arg,
	rs6000_finish_function_arg, rs6000_function_arg,
	rs6000_arg_partial_bytes, rs6000_pass_by_reference,
	rs6000_parm_needs_stack, rs6000_function_parms_need_stack,
	rs6000_reg_parm_stack_space, rs6000_move_block_from_reg,
	setup_incoming_varargs, rs6000_build_builtin_va_list, rs6000_va_start,
	rs6000_gimplify_va_arg, def_builtin, bdesc_3arg, bdesc_dst,
	bdesc_2arg, bdesc_altivec_preds, bdesc_abs, bdesc_1arg, bdesc_0arg,
	bdesc_htm, rs6000_overloaded_builtin_p, rs6000_overloaded_builtin_name,
	rs6000_expand_zeroop_builtin, rs6000_expand_mtfsf_builtin,
	rs6000_expand_mtfsb_builtin, rs6000_expand_set_fpscr_rn_builtin,
	rs6000_expand_set_fpscr_drn_builtin, rs6000_expand_unop_builtin,
	altivec_expand_abs_builtin, rs6000_expand_binop_builtin,
	altivec_expand_predicate_builtin, swap_endian_selector_for_mode,
	altivec_expand_lv_builtin, altivec_expand_stxvl_builtin,
	altivec_expand_stv_builtin, htm_spr_num, rs6000_htm_spr_icode,
	htm_expand_builtin, cpu_expand_builtin, rs6000_expand_ternop_builtin,
	altivec_expand_dst_builtin, altivec_expand_vec_init_builtin,
	get_element_number, altivec_expand_vec_set_builtin,
	altivec_expand_vec_ext_builtin, altivec_expand_builtin,
	rs6000_builtin_is_supported_p, rs6000_invalid_builtin,
	rs6000_fold_builtin, rs6000_builtin_valid_without_lhs,
	fold_build_vec_cmp, fold_compare_helper, fold_mergehl_helper,
	fold_mergeeo_helper, rs6000_gimple_fold_builtin,
	rs6000_expand_builtin, rs6000_vector_type,
	rs6000_init_builtins, rs6000_builtin_decl, altivec_init_builtins,
	htm_init_builtins, builtin_function_type, rs6000_common_init_builtins,
	rs6000_internal_arg_pointer, rs6000_output_mi_thunk): Move
	to rs6000-call.c.
	* config/rs6000/rs6000-call.c (builtin_description, cpu_is_info,
	cpu_supports_info, builtin_hash_struct, builtin_hasher,
	builtin_hash_table, rs6000_builtin_info_type, rs6000_builtin_info,
	rs6000_aggregate_candidate, rs6000_discover_homogeneous_aggregate,
	rs6000_return_in_memory, rs6000_return_in_msb, call_ABI_of_interest,
	init_cumulative_args, rs6000_promote_function_mode,
	rs6000_must_pass_in_stack, is_complex_IBM_long_double,
	abi_v4_pass_in_fpr, rs6000_function_arg_padding,
	rs6000_function_arg_boundary, rs6000_parm_offset,
	rs6000_parm_start, rs6000_arg_size,
	rs6000_darwin64_record_arg_advance_flush,
	rs6000_darwin64_record_arg_advance_recurse,
	rs6000_darwin64_struct_check_p, rs6000_function_arg_advance_1,
	rs6000_function_arg_advance, rs6000_darwin64_record_arg_flush,
	rs6000_darwin64_record_arg_recurse, rs6000_darwin64_record_arg,
	rs6000_mixed_function_arg, rs6000_psave_function_arg,
	rs6000_finish_function_arg, rs6000_function_arg,
	rs6000_arg_partial_bytes, rs6000_pass_by_reference,
	rs6000_parm_needs_stack, rs6000_function_parms_need_stack,
	rs6000_reg_parm_stack_space, rs6000_move_block_from_reg,
	setup_incoming_varargs, rs6000_build_builtin_va_list, rs6000_va_start,
	rs6000_gimplify_va_arg, def_builtin, bdesc_3arg, bdesc_dst,
	bdesc_2arg, bdesc_altivec_preds, bdesc_abs, bdesc_1arg, bdesc_0arg,
	bdesc_htm, rs6000_overloaded_builtin_p, rs6000_overloaded_builtin_name,
	rs6000_expand_zeroop_builtin, rs6000_expand_mtfsf_builtin,
	rs6000_expand_mtfsb_builtin, rs6000_expand_set_fpscr_rn_builtin,
	rs6000_expand_set_fpscr_drn_builtin, rs6000_expand_unop_builtin,
	altivec_expand_abs_builtin, rs6000_expand_binop_builtin,
	altivec_expand_predicate_builtin, swap_endian_selector_for_mode,
	altivec_expand_lv_builtin, altivec_expand_stxvl_builtin,
	altivec_expand_stv_builtin, htm_spr_num, rs6000_htm_spr_icode,
	htm_expand_builtin, cpu_expand_builtin, rs6000_expand_ternop_builtin,
	altivec_expand_dst_builtin, altivec_expand_vec_init_builtin,
	get_element_number, altivec_expand_vec_set_builtin,
	altivec_expand_vec_ext_builtin, altivec_expand_builtin,
	rs6000_builtin_is_supported_p, rs6000_invalid_builtin,
	rs6000_fold_builtin, rs6000_builtin_valid_without_lhs,
	fold_build_vec_cmp, fold_compare_helper, fold_mergehl_helper,
	fold_mergeeo_helper, rs6000_gimple_fold_builtin,
	rs6000_expand_builtin, rs6000_vector_type,
	rs6000_init_builtins, rs6000_builtin_decl, altivec_init_builtins,
	htm_init_builtins, builtin_function_type, rs6000_common_init_builtins,
	rs6000_internal_arg_pointer, rs6000_output_mi_thunk: Move
	to here from rs6000.c.
	* config/rs6000/rs6000-internal.h: (rs6000_darwin64_struct_check_p,
	rs6000_discover_homogeneous_aggregate, rs6000_output_mi_thunk,
	rs6000_output_addr_const_extra, rs6000_gimple_fold_builtin,
	rs6000_invalid_builtin, rs6000_build_builtin_va_list, rs6000_va_start,
	rs6000_gimplify_va_arg, rs6000_promote_function_mode,
	rs6000_return_in_memory, rs6000_return_in_msb,
	rs6000_pass_by_reference, setup_incoming_varargs,
	rs6000_function_arg_boundary, rs6000_must_pass_in_stack,
	rs6000_arg_partial_bytes, rs6000_function_arg_advance,
	rs6000_function_arg_padding, rs6000_function_arg,
	rs6000_darwin64_record_arg, rs6000_internal_arg_pointer,
	rs6000_init_builtins, rs6000_builtin_decl, rs6000_expand_builtin,
	rs6000_fold_builtin, rs6000_passes_ieee128, rs6000_passes_float,
	rs6000_passes_long_double, rs6000_passes_vector,
	rs6000_returns_struct, cpu_builtin_p, tree builtin_mode_to_type,
	altivec_builtin_mask_for_load) Add declarations.
	* config/rs6000/t-rs6000: Add new source file rs6000-call.c.
	* config/config.gcc: Add new source file rs6000-call.c to garbage
	collector and extra_objs.

2019-07-19  Jeff Law  <law@redhat.com>

	PR tree-optimization/86061
	* tree-ssa-dse.c (initialize_ao_ref_for_dse): Handle
	strncpy.  Drop some trivial dead code.
	(maybe_trim_memstar_call): Handle strncpy.

2019-07-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91211
	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Fix
	memset encoding size.

2019-07-19  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91204
	* config/i386/mmx.md (one_cmpl<mode>2): New expander.

2019-07-19  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/91194
	* ipa-inline.c (recursive_inlining): Fix limits check.

2019-07-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91200
	* tree-ssa-phiopt.c (cond_store_replacement): Check we have
	no PHI nodes in middle-bb.

2019-07-19  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/invoke.texi: Rename the AArch64 +bitperm extension flag
	to +sve-bitperm.
	* config/aarch64/aarch64-option-extensions.def: Likewise.

2019-07-19  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/91190
	* function.c (insert_temp_slot_address): Store into the hash table
	a copy of address to avoid RTL sharing issues.

2019-07-19  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91207
	Revert
	2019-07-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91178
	* tree-vect-stmts.c (get_group_load_store_type): For SLP
	loads with a gap larger than the vector size always use
	VMAT_STRIDED_SLP.
	(vectorizable_load): For VMAT_STRIDED_SLP with a permutation
	avoid loading vectors that are only contained in the gap
	and thus are not needed.

2019-07-18  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*addqi_2_slp): Remove.
	(*<code>qi_2_slp): Ditto.

2019-07-18  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (prefixed_mem_operand): Call
	rs6000_prefixed_address_mode_p instead of rs6000_prefixed_address.
	* config/rs6000/rs6000-protos.h (rs6000_prefixed_address_mode_p):
	Rename function from rs6000_prefixed_address.
	* config/rs6000/aix.h (TARGET_HAS_TOC): Rename TARGET_TOC to
	TARGET_HAS_TOC.
	(TARGET_TOC): Likewise.
	(TARGET_NO_TOC): Delete here, define TARGET_NO_TOC_OR_PCREL in
	rs6000.h.
	* config/rs6000/darwin.h (TARGET_HAS_TOC): Rename TARGET_TOC to
	TARGET_HAS_TOC.
	(TARGET_TOC): Likewise.
	(TARGET_NO_TOC): Delete here, define TARGET_NO_TOC_OR_PCREL in
	rs6000.h.
	* config/rs6000/linux64.h (TARGET_HAS_TOC): Rename TARGET_TOC to
	TARGET_HAS_TOC.
	(TARGET_TOC): Likewise.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Add
	check to require -mcmodel=medium for pc-relative addressing.
	(create_TOC_reference): Add assertion for TARGET_TOC.
	(rs6000_legitimize_address): Use TARGET_NO_TOC_OR_PCREL instead of
	TARGET_NO_TOC.
	(rs6000_emit_move): Likewise.
	(TOC_alias_set): Rename TOC alias set static variable from 'set'
	to 'TOC_alias_set'.
	(get_TOC_alias_set): Likewise.
	(output_toc): Use TARGET_NO_TOC_OR_PCREL instead of
	TARGET_NO_TOC.
	(rs6000_can_eliminate): Likewise.
	(rs6000_prefixed_address_mode_p): Rename function from
	rs6000_prefixed_address.
	* config/rs6000/rs6000.h (TARGET_TOC): Define in terms of
	TARGET_HAS_TOC and not pc-relative.
	(TARGET_NO_TOC_OR_PCREL): New macro to replace TARGET_NO_TOC.
	* config/rs6000/sysv4.h (TARGET_HAS_TOC): Rename TARGET_TOC to
	TARGET_HAS_TOC.
	(TARGET_TOC): Likewise.
	(TARGET_NO_TOC): Delete here, define TARGET_NO_TOC_OR_PCREL in
	rs6000.h.

2019-07-18  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/91188
	* config/i386/i386.md (*addqi_1_slp): Use register_operand predicate
	for operand 0.  Do not use (match_dup) to match operand 1 with
	operand 0.  Add check in insn constraint that either input operand
	matches operand 0.  Use SWI12 mode iterator to also handle
	HImode operands.
	(*and<mode>_1_slp): Ditto.
	(*<code>qi_1_slp): Ditto.
	(*sub<mode>_1_slp): Use register_operand predicate for operand 0.
	Do not use (match_dup) to match operand 1 with operand 0.  Add
	check in insn constraint that operand 1 matches operand 0.
	Use SWI12 mode iterator to also handle HImode operands.
	(*ashl<mode>3_1_slp): Ditto.
	(*<shift_insn><mode>3_1_slp): Ditto.
	(*<rotate_insn><mode>3_1_slp): Ditto.

2019-07-18  Sylvia Taylor  <sylvia.taylor@arm.com>

	* config/arm/arm-builtins.c
	(arm_expand_ternop_builtin): Remove explicit sha1 builtin handling.
	(arm_expand_unop_builtin): Likewise.
	* config/arm/crypto.md
	(crypto_sha1h): Convert from define_insn to define_expand.
	(crypto_<crypto_pattern>): Likewise.
	(crypto_sha1h_lb): New define_insn.
	(crypto_<crypto_pattern>_lb): Likewise.

2019-07-18  Sylvia Taylor  <sylvia.taylor@arm.com>

	PR target/90317
	* config/arm/arm_neon.h (vsha1h_u32): Refactor.
	(vsha1cq_u32): Likewise.
	(vsha1pq_u32): Likewise.
	(vsha1mq_u32): Likewise.
	* config/arm/crypto.md (crypto_sha1h): Remove zero extend, correct
	vec select.
	(crypto_sha1c): Correct vec select.
	(crypto_sha1m): Likewise.
	(crypto_sha1p): Likewise.

2019-07-18  Richard Earnshaw  <rearnsha@arm.com>

	* config/arm/predicates.md (arm_borrow_operation): New predicate.
	* config/arm/arm.c (subdi3_compare1): Use CCmode for the split.
	(arm_subdi3, subdi_di_zesidi, subdi_di_sesidi): Likewise.
	(subdi_zesidi_zesidi): Likewise.
	(negdi2_compare, negdi2_insn): Likewise.
	(negdi_extensidi): Likewise.
	(negdi_zero_extendsidi): Likewise.
	(arm_cmpdi_insn): Likewise.
	(subsi3_carryin): Use arm_borrow_operation.
	(subsi3_carryin_const): Likewise.
	(subsi3_carryin_const0): Likewise.
	(subsi3_carryin_compare): Likewise.
	(subsi3_carryin_compare_const): Likewise.
	(subsi3_carryin_compare_const0): Likewise.
	(subsi3_carryin_shift): Likewise.
	(rsbsi3_carryin_shift): Likewise.
	(negsi2_carryin_compare): Likewise.

2019-07-18  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/91137
	* tree-ssa-loop-ivopts.c (struct ivopts_data): New field.
	(tree_ssa_iv_optimize_init, alloc_iv, tree_ssa_iv_optimize_finalize):
	Init, use and fini the above new field.
	(determine_base_object_1): New function.
	(determine_base_object): Reimplement using walk_tree.

2019-07-18  Richard Sandiford  <richard.sandiford@arm.com>

	* basic-block.h (CLEANUP_FORCE_FAST_DCE): New macro.
	* cfgcleanup.c (cleanup_cfg): Call run_fast_dce if
	CLEANUP_FORCE_FAST_DCE is set.
	* ifcvt.c (rest_of_handle_if_conversion): Pass
	CLEANUP_FORCE_FAST_DCE to the final cleanup_cfg call if
	if-conversion succeeded.

2019-07-18  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_walk_cb_data::push_partial_def): Refactor
	branches to make code less indented.

2019-07-17  Alexandre Oliva  <oliva@adacore.com>

	PR middle-end/81824
	* attribs.c (decls_mismatched_attributes): Simplify the logic
	that avoids duplicates and false positives.

2019-07-17  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (pa_som_asm_init_sections): Don't force all constant
	data into data section when generating PIC code.
	(pa_select_section): Use pa_reloc_rw_mask() to qualify relocs.
	(pa_reloc_rw_mask): Return 3 when generating PIC code and when
	generating code for SOM targets earlier than HP-UX 11.  Otherwise,
	return 2 for SOM and 0 for other targets.

2019-07-17  Jeff Law  <law@redhat.com>

	* tree-ssa-dse.c (initialize_ao_ref_for_dse): Fix formatting.
	(dse_walker::dse_optimize_stmt): Likewise.  Add missing return to
	avoid unexpected switch statement fallthru.

2019-07-17  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*add<dwi>3_doubleword):
	Remove redundant constraints.
	(*add<mode>_1): Ditto.
	(*addhi_1): Ditto.
	(*addqi_1): Ditto.
	(*addqi_1_slp): Ditto.
	(*add<mode>_2): Ditto.
	(*addv<mode>4): Ditto.
	(*sub<dwi>3_doubleword): Ditto.
	(*sub<mode>_1): Ditto.
	(*subqi_1_slp): Ditto.
	(*sub<mode>_2): Ditto.
	(*subv<mode>4): Ditto.
	(*sub<mode>_3): Ditto.
	(@add<mode>3_carry): Ditto.
	(@sub<mode>3_carry): Ditto.
	(*add<mode>3_cc_overflow_1): Ditto.
	(*add<mode>3_zext_cc_overflow_2): Ditto.
	(*anddi_1): Ditto.
	(*and<mode>_1): Ditto.
	(*andqi_1): Ditto.
	(*andqi_1_slp): Ditto.
	(*anddi_2): Ditto.
	(*andqi_2_maybe_si): Ditto.
	(*and<mode>_2): Ditto.
	(*andqi_2_slp): Ditto.
	(*<code><mode>_1): Ditto.
	(*<code>qi_1): Ditto.
	(*<code>qi_1_slp): Ditto.
	(*<code><mode>_2): Ditto.
	(*<code>qi_2_slp): Ditto.

2019-07-17  Jan Hubicka  <hubicka@ucw.cz>

	* alias.c (record_component_aliases): Do not simplify pointed-to
	types of ODR types.

2019-07-17  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*andqi_2_maybe_si): Handle potential
	partial reg stall on alternative 2.

2019-07-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91178
	* tree-ssa.c (release_defs_bitset): Iterate from higher to
	lower SSA names to avoid quadratic behavior in the common case.
	* tree-data-ref.c (split_constant_offset): Add limit argument
	and pass it down.  Initialize it from PARAM_SSA_NAME_DEF_CHAIN_LIMIT.
	(split_constant_offset_1): Add limit argument and use it to
	limit SSA def walking.  Optimize the common plus/minus case.

2019-07-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91178
	* tree-vect-stmts.c (get_group_load_store_type): For SLP
	loads with a gap larger than the vector size always use
	VMAT_STRIDED_SLP.
	(vectorizable_load): For VMAT_STRIDED_SLP with a permutation
	avoid loading vectors that are only contained in the gap
	and thus are not needed.

2019-07-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91180
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Fix offset
	computation for memset partial defs.

2019-07-17  Jakub Jelinek  <jakub@redhat.com>

	* gimple.h (enum gf_mask): Remove GF_OMP_FOR_SIMD, change
	GF_OMP_FOR_KIND_SIMD to a value serially after other kinds,
	divide GF_OMP_FOR_KIND_MASK, GF_OMP_FOR_COMBINED,
	GF_OMP_FOR_COMBINED_INTO, GF_OMP_FOR_GRID_PHONY,
	GF_OMP_FOR_GRID_INTRA_GROUP and GF_OMP_FOR_GRID_GROUP_ITER by two.
	* omp-grid.c (grid_process_grid_body,
	grid_eliminate_combined_simd_part): Use GF_OMP_FOR_KIND_SIMD instead
	of GF_OMP_FOR_SIMD, don't test & GF_OMP_FOR_SIMD but
	== GF_OMP_FOR_KIND_SIMD.
	* omp-low.c (build_outer_var_ref, scan_sharing_clauses,
	check_omp_nesting_restrictions, scan_omp_1_stmt,
	lower_rec_input_clauses, lower_lastprivate_conditional_clauses,
	lower_lastprivate_clauses, lower_reduction_clauses, lower_omp_scan,
	omp_find_scan): Likewise.
	* omp-expand.c (expand_omp_for): Likewise.
	* omp-general.c (omp_extract_for_data): Likewise.

	PR tree-optimization/91157
	* tree-vect-generic.c (expand_vector_comparison): Handle lhs being
	a vector boolean with scalar mode.
	(expand_vector_condition): Handle first operand being a vector boolean
	with scalar mode.
	(expand_vector_operations_1): For comparisons, don't bail out early
	if the return type is vector boolean with scalar mode, but comparison
	operand type is not.

2019-07-17  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91181
	* tree-vect-slp.c (vect_build_slp_tree_1): Do not compare
	IFN_LOADs as calls.

2019-07-16  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (*testdi_1): Match CCZmode for
	constants that might have the SImode sign bit set.
	(*testqi_1_maybe_si): Remove "!" constraint modifier.
	Use correct constraints for pentium pairing.
	(*test<mode>_1): Ditto.

2019-07-16  Jeff Law  <law@redhat.com>

	PR rtl-optimization/91173
	* tree-ssa-address.c (addr_for_mem_ref): If the base is an
	SSA_NAME with a constant value, fold its value into the offset
	and clear the base before calling gen_addr_rtx.

2019-07-16  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/91164
	* dse.c (rest_of_handle_dse): If dead edges have been purged,
	invalidate dominance info.

2019-07-16  Richard Sandiford  <richard.sandiford@arm.com>

	* read-md.h (md_reader::record_potential_iterator_use): Add a
	file_location parameter.
	* read-rtl.c (attribute_use::loc): New field.
	(map_attr_string): Take a file_location parameter.  Report cases
	in which attributes map to multiple distinct values.
	(apply_attribute_uses): Update call accordingly.
	(md_reader::handle_overloaded_name): Likewise.
	(md_reader::apply_iterator_to_string): Likewise.  Skip empty
	nonnull strings.
	(record_attribute_use): Take a file_location parameter.
	Initialize attribute_use::loc.
	(md_reader::record_potential_iterator_use): Take a file_location
	parameter.  Update call to record_attribute_use.
	(rtx_reader::rtx_alloc_for_name): Update call accordingly.
	(rtx_reader::read_rtx_code): Likewise.
	(rtx_reader::read_rtx_operand): Likewise.  Record a location
	for implicitly-expanded empty strings.

2019-07-16  Richard Sandiford  <richard.sandiford@arm.com>

	* read-md.h (md_reader::ptr_loc): Moved from read-md.c.
	Use file_location instead of separate fields.
	(md_reader::set_md_ptr_loc): Take a file_location instead of a
	separate filename and line number.
	* read-md.c (ptr_loc): As above.
	(md_reader::copy_md_ptr_loc): Update for new ptr_loc layout.
	(md_reader::fprint_md_ptr_loc): Likewise.
	(md_reader::set_md_ptr_loc): Likewise.  Take a file_location
	instead of a separate filename and line number.
	(md_reader::read_string): Update call accordingly.

2019-07-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/rs6000/rs6000.md (*mov<mode>_update1): Explicitly
	use <SFDF:mode>, <SFDF:MODE>, <SFDF:Ff> and <SFDF:bits> rather than
	leaving the choice between SFDF and P implicit.
	(*mov<mode>_update2): Likewise.
	(*cmp<IBM128:mode>_internal2): Explicitly use <IBM128:MODE>
	rather than leaving the choice betweem IBM128 and GPR implicit.
	(*fix<uns>_trunc<IEEE128:mode><QHSI:mode>2_mem): Explicitly use
	<IEEE128:MODE> rather than leaving the choice between IEEE128 and
	QHSI implicit.
	(AltiVec define_peephole2s): Explicitly use <ALTIVEC_DFORM:MODE>
	rather than leaving the choice between ALTIVEC_DFORM and P implicit.
	* config/rs6000/vsx.md
	(*vsx_ext_<VSX_EXTRACT_I:VS_scalar>_fl_<FL_CONV:mode>)
	(*vsx_ext_<VSX_EXTRACT_I:VS_scalar>_ufl_<FL_CONV:mode>): Explicitly
	use <FL_CONV:VSisa> rather than leaving the choice between FL_CONV
	and VSX_EXTRACT_I implicit.

2019-07-16  Richard Sandiford  <richard.sandiford@arm.com>

	* config/mips/micromips.md (*movep<MOVEP1:mode><MOVEP2:mode>):
	Explicitly use <MOVEP1:MODE> for the mode attribute.

2019-07-16  Jan Hubicka  <hubicka@ucw.cz>

	PR bootstrap/91176
	* ipa-fnsummary.c (analyze_function_body): Skip debug stmts

2019-07-15  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/91050
	* config/rs6000/rs6000.c (rs6000_file_start): Never skip emitting a
	.machine directive.

2019-07-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (@test<mode>_ccno_1):
	Rename from test<mode>_ccno_1.
	(*testdi_1): Remove redundant alternatives.  Remove modrm attribute.
	(*testqi_1_maybe_si): Remove modrm attribute.
	(*test<mode>_1): Ditto.
	* config/i386/i386-expand.c (ix86_split_idivmod): Use
	gen_test_ccno_1 and gen_extend_insn.

2019-07-15  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (aliasing_component_refs_walk): Initialize same_p
	to 0.

2019-07-15  Richard Biener  <rguenther@suse.de>

	PR middle-end/91162
	* tree-cfg.c (move_block_to_fn): When releasing a virtual PHI
	node make sure to replace all uses with something valid.

2019-07-15  Kewen Lin  <linkw@gcc.gnu.org>

	PR tree-optimization/88497
	* tree-ssa-reassoc.c (reassociate_bb): Swap the positions of
	GIMPLE_BINARY_RHS check and gimple_visited_p check, call new
	function undistribute_bitref_for_vector.
	(undistribute_bitref_for_vector): New function.
	(cleanup_vinfo_map): Likewise.
	(sort_by_mach_mode): Likewise.

2019-07-14  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (nonmemory_szext_operand): New mode attribute.
	(test<mode>_ccno_1): Macroize insn pattern from testsi_ccno_1
	and testdi_ccno_1 using SWI48 mode attribute.
	(*testdi_1): Use x86_64_szext_nonmemory_operand instead of
	x86_64_szext_general_operand.
	(*testqi_1_maybe_si): Use nonmemory_operand instead of general_operand.
	(*test<mode>_1): Use nonmemory_szext_operand mode attribute
	instead of genera_operand mode attribute.

2019-07-14  Vladislav Ivanishin  <vlad@ispras.ru>

	* gdbhooks.py (DumpFn.invoke): Add explicit casts of return values of
	fopen and fclose to their respective types.
	(DotFn.invoke): Ditto.

2019-07-14  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (ipa_dump_hints): Do not dump array_index.
	(ipa_fn_summary::~ipa_fn_summary): Do not destroy array_index.
	(ipa_fn_summary_t::duplicate): Do not duplicate array_index.
	(array_index_predicate): Remove.
	(analyze_function_body): Account cost for variable ofsetted array
	indexing.
	(estimate_node_size_and_time): Do not compute array index hint.
	(ipa_merge_fn_summary_after_inlining): Do not merge array index hint.
	(inline_read_section): Do not read array index hint.
	(ipa_fn_summary_write): Do not write array index hint.
	* doc/invoke.texi (ipa-cp-array-index-hint-bonus): Remove.
	* ipa-cp.c (hint_time_bonus): Remove.
	* ipa-fnsummary.h (ipa_hints_vals): Remove array_index.
	(ipa_fnsummary): Remove array_index.
	* ipa-inline.c (want_inline_small_function_p): Do not use
	array_index.
	(edge_badness): Likewise.
	* params.def (PARAM_IPA_CP_ARRAY_INDEX_HINT_BONUS): Remove.

2019-07-14  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/91148
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin): Remove
	superfluous "builtin function" phrasing.

2019-07-13  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (component_ref_to_zero_sized_trailing_array_p):
	Break out from ...
	(aliasing_component_refs_walk): Break out from ...
	(aliasing_component_refs_p): ... here.

2019-07-13  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/91148
	* config/rs6000/rs6000.c (rs6000_invalid_builtin): Remove superfluous
	"builtin function" phrasing.

2019-07-13  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/90723
	* recog.h (temporary_volatile_ok): New class.
	* config/aarch64/aarch64.c (aarch64_emit_sve_pred_move): Set
	volatile_ok temporarily to true using temporary_volatile_ok.
	* expr.c (emit_block_move_via_cpymem): Likewise.
	* optabs.c (maybe_legitimize_operand): Likewise.

2019-07-13  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (struct gimplify_omp_ctx): Add order_concurrent member.
	(omp_notice_threadprivate_variable): Diagnose threadprivate variable
	uses inside of order(concurrent) constructs.
	(gimplify_scan_omp_clauses): Set ctx->order_concurrent if
	OMP_CLAUSE_ORDER is seen.
	* omp-low.c (struct omp_context): Add order_concurrent member.
	(scan_sharing_clauses): Set ctx->order_concurrent if
	OMP_CLAUSE_ORDER is seen.
	(check_omp_nesting_restrictions): Diagnose ordered or atomic inside
	of simd order(concurrent).  Diagnose constructs not allowed inside of
	for order(concurrent).
	(setjmp_or_longjmp_p): Add a context and TREE_PUBLIC check to avoid
	complaining about static double setjmp (double); or class static
	methods or non-global namespace setjmps.
	(omp_runtime_api_call): New function.
	(scan_omp_1_stmt): Diagnose OpenMP runtime API calls inside of
	order(concurrent) loops.

2019-07-12  Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (ssa-name-def-chain-limit): Document new --param.
	* params.def (PARAM_SSA_NAME_DEF_CHAIN_LIMIT): Add new --param.
	* tree-vrp.c (vrp_prop::check_mem_ref): Use
	PARAM_SSA_NAME_DEF_CHAIN_LIMIT.

2019-07-12  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (same_tmr_indexing_p): Break out from ...
	(indirect_refs_may_alias_p): ... here.
	(nonoverlapping_component_refs_since_match_p): Support also non-trivial
	mem refs in the access paths.

2019-07-12  Jiangning Liu  <jiangning.liu@amperecomputing.com>

	PR tree-optimization/89430
	* tree-ssa-phiopt.c (cond_store_replacement): Support conditional
	store elimination for local variable without address escape.

2019-07-12  Jeff Law  <law@redhat.com>

	* config/c6x/c6x.c (c6x_section_type): Clear SECTION_NOTYPE
	for the ".far" section.

2019-07-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91145
	* tree-vect-slp.c (vect_build_slp_tree_2): Fix reduction
	chain check.

2019-07-12  Alexandre Oliva  <oliva@adacore.com>

	* tree-eh.c (honor_protect_cleanup_actions): Use outer_
	rather than this_state as the lowering context for the ELSE
	seq in a GIMPLE_EH_ELSE.

2019-07-12  Richard Sandiford  <richard.sandiford@arm.com>

	* vector-builder.h (vector_builder::elt): Allow already-supplied
	elements to be read back before building is complete.

2019-07-12  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/91136
	* df-core.c (ACCESSING REFS): Fix typos in comment.
	* resource.c (mark_target_live_reg): Add artificial defs that occur at
	the beginning of the block to the initial set of live registers.

2019-07-12  Richard Biener  <rguenther@suse.de>

	* fold-const.h (get_array_ctor_element_at_index): Adjust.
	* fold-const.c (get_array_ctor_element_at_index): Add
	ctor_idx output parameter informing the caller where in
	the constructor the element was (not) found.  Add early exit
	for when the ctor is sorted.
	* gimple-fold.c (fold_array_ctor_reference): Support constant
	folding across multiple array elements.

2019-07-12  Eric Botcazou  <ebotcazou@adacore.com>

	* cfgexpand.c (expand_gimple_stmt_1) <GIMPLE_RETURN>: If the statement
	doesn't have location, set the current location to the function's end.

2019-07-12  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64.md (*compare_condjump<mode>)
	(loadwb_pair<GPI:mode>_<P:mode>, loadwb_pair<GPF:mode>_<P:mode>)
	(storewb_pair<GPI:mode>_<P:mode>, storewb_pair<GPF:mode>_<P:mode>)
	(*ands<mode>_compare0): Fix ambiguous uses of .md attributes.
	* config/aarch64/aarch64-simd.md
	(*aarch64_get_lane_extend<GPI:mode><VDQQH:mode>): Likewise.
	(*aarch64_get_lane_zero_extend<GPI:mode><VDQQH:mode>): Likewise.
	* config/aarch64/aarch64-sve.md
	(while_ult<GPI:mode><PRED_ALL:mode>): Likewise.
	(*cond_<optab><mode>_any): Fix SVE_I/SVE_SDI typo.

2019-07-12  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/md.texi: Document that @ patterns can have different
	numbers of operands.
	* genemit.c (handle_overloaded_gen): Handle this case.
	* genopinit.c (handle_overloaded_gen): Likewise.
	* gensupport.c (replace_operands_with_dups): Iterate over
	the new rtx's format rather than the old one's.

2019-07-12  Jakub Jelinek  <jakub@redhat.com>

	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE_ORDER.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add
	order clause entries.
	(walk_tree_1): Handle OMP_CLAUSE_ORDER.
	* tree-pretty-print.c (dump_omp_clause): Likewise.
	* gimplify.c (gimplify_scan_omp_clauses, gimplify_adjust_omp_clauses):
	Likewise.
	* omp-low.c (scan_sharing_clauses): Likewise.
	* tree-nested.c (convert_nonlocal_omp_clauses,
	convert_local_omp_clauses): Likewise.

2019-07-12  Kewen Lin  <linkw@gcc.gnu.org>

	* cfgrtl.c (print_rtl_with_bb): Emit a hint if the
	fallthrough target of current basic block isn't the placed
	right next.

2019-07-11  Sunil K Pandey  <sunil.k.pandey@intel.com>

	PR target/90980
	* config/i386/avx512fintrin.h (_mm512_loadu_epi64): New.
	(_mm512_storeu_epi64): Likewise.
	(_mm512_loadu_epi32): Likewise.
	(_mm512_storeu_epi32): Likewise.
	* config/i386/avx512vlintrin.h (_mm256_storeu_epi64): New.
	(_mm_storeu_epi64): Likewise.
	(_mm256_storeu_epi32): Likewise.
	(_mm_storeu_epi32): Likewise.

2019-07-11  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-logue.c: Add Modula-2 to comment.

2019-07-11  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-logue.c (rs6000_output_function_epilogue):
	Handle Modula-2.

2019-07-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/91124
	* config/i386/sse.md (sse2_cvtpd2dq<mask_name>): Change into ...
	(sse2_cvtpd2dq): ... this.  Remove mask substitution macros.
	(sse2_cvtpd2dq_mask, sse2_cvtpd2dq_mask_1): New define_insns.
	(ufix_notruncv2dfv2si2<mask_name>): Change into ...
	(ufix_notruncv2dfv2si2): ... this.  Remove mask substitution macros.
	(ufix_notruncv2dfv2si2_mask, ufix_notruncv2dfv2si2_mask_1): New
	define_insns.
	(ufix_truncv2dfv2si2<mask_name>): Change into ...
	(ufix_truncv2dfv2si2): ... this.  Remove mask substitution macros.
	(ufix_truncv2dfv2si2_mask, ufix_truncv2dfv2si2_mask_1): New
	define_insns.
	(sse2_cvttpd2dq<mask_name>): Change into ...
	(sse2_cvttpd2dq): ... this.  Remove mask substitution macros.
	(sse2_cvttpd2dq_mask, sse2_cvttpd2dq_mask_1): New define_insns.
	(*sse2_cvtpd2dq<mask_name>): Change into ...
	(*sse2_cvtpd2dq): ... this.  Remove mask substitution macros.
	Add "C" constraint to const0_operand.
	(*sse2_cvtpd2dq_mask, *sse2_cvtpd2dq_mask_1): New define_insns.
	(sse2_cvtpd2ps_mask): Adjust expand to match *sse2_cvtpd2ps_mask
	changes.

	PR target/91124
	* config/i386/i386-builtin-types.def
	(V32HI_FTYPE_V32HI_V32HI_V32HI_INT,
	V16HI_FTYPE_V16HI_V16HI_V16HI_INT, V8HI_FTYPE_V8HI_V8HI_V8HI_INT,
	V8SI_FTYPE_V8SI_V8SI_V8SI_INT, V4DI_FTYPE_V4DI_V4DI_V4DI_INT,
	V8DI_FTYPE_V8DI_V8DI_V8DI_INT, V16SI_FTYPE_V16SI_V16SI_V16SI_INT,
	V2DI_FTYPE_V2DI_V2DI_V2DI_INT, V4SI_FTYPE_V4SI_V4SI_V4SI_INT): Remove.
	* config/i386/i386-builtin.def (__builtin_ia32_vpshrdv_v32hi_mask,
	__builtin_ia32_vpshrdv_v32hi_maskz, __builtin_ia32_vpshrdv_v16hi_mask,
	__builtin_ia32_vpshrdv_v16hi_maskz, __builtin_ia32_vpshrdv_v8hi_mask,
	__builtin_ia32_vpshrdv_v8hi_maskz, __builtin_ia32_vpshrdv_v16si_mask,
	__builtin_ia32_vpshrdv_v16si_maskz, __builtin_ia32_vpshrdv_v8si_mask,
	__builtin_ia32_vpshrdv_v8si_maskz, __builtin_ia32_vpshrdv_v4si_mask,
	__builtin_ia32_vpshrdv_v4si_maskz, __builtin_ia32_vpshrdv_v8di_mask,
	__builtin_ia32_vpshrdv_v8di_maskz, __builtin_ia32_vpshrdv_v4di_mask,
	__builtin_ia32_vpshrdv_v4di_maskz, __builtin_ia32_vpshrdv_v2di_mask,
	__builtin_ia32_vpshrdv_v2di_maskz, __builtin_ia32_vpshldv_v32hi_mask,
	__builtin_ia32_vpshldv_v32hi_maskz, __builtin_ia32_vpshldv_v16hi_mask,
	__builtin_ia32_vpshldv_v16hi_maskz, __builtin_ia32_vpshldv_v8hi_mask,
	__builtin_ia32_vpshldv_v8hi_maskz, __builtin_ia32_vpshldv_v16si_mask,
	__builtin_ia32_vpshldv_v16si_maskz, __builtin_ia32_vpshldv_v8si_mask,
	__builtin_ia32_vpshldv_v8si_maskz, __builtin_ia32_vpshldv_v4si_mask,
	__builtin_ia32_vpshldv_v4si_maskz, __builtin_ia32_vpshldv_v8di_mask,
	__builtin_ia32_vpshldv_v8di_maskz, __builtin_ia32_vpshldv_v4di_mask,
	__builtin_ia32_vpshldv_v4di_maskz, __builtin_ia32_vpshldv_v2di_mask,
	__builtin_ia32_vpshldv_v2di_maskz, __builtin_ia32_vpdpbusd_v16si_mask,
	__builtin_ia32_vpdpbusd_v16si_maskz, __builtin_ia32_vpdpbusd_v8si_mask,
	__builtin_ia32_vpdpbusd_v8si_maskz, __builtin_ia32_vpdpbusd_v4si_mask,
	__builtin_ia32_vpdpbusd_v4si_maskz,
	__builtin_ia32_vpdpbusds_v16si_mask,
	__builtin_ia32_vpdpbusds_v16si_maskz,
	__builtin_ia32_vpdpbusds_v8si_mask,
	__builtin_ia32_vpdpbusds_v8si_maskz,
	__builtin_ia32_vpdpbusds_v4si_mask,
	__builtin_ia32_vpdpbusds_v4si_maskz,
	__builtin_ia32_vpdpwssd_v16si_mask,
	__builtin_ia32_vpdpwssd_v16si_maskz, __builtin_ia32_vpdpwssd_v8si_mask,
	__builtin_ia32_vpdpwssd_v8si_maskz, __builtin_ia32_vpdpwssd_v4si_mask,
	__builtin_ia32_vpdpwssd_v4si_maskz,
	__builtin_ia32_vpdpwssds_v16si_mask,
	__builtin_ia32_vpdpwssds_v16si_maskz,
	__builtin_ia32_vpdpwssds_v8si_mask,
	__builtin_ia32_vpdpwssds_v8si_maskz,
	__builtin_ia32_vpdpwssds_v4si_mask,
	__builtin_ia32_vpdpwssds_v4si_maskz): Use *_USI, *_UHI or *_UQI
	suffixed types rather than *_INT.
	* config/i386/i386-expand.c (ix86_expand_args_builtin): Don't handle
	V32HI_FTYPE_V32HI_V32HI_V32HI_INT, V16HI_FTYPE_V16HI_V16HI_V16HI_INT,
	V8HI_FTYPE_V8HI_V8HI_V8HI_INT, V8SI_FTYPE_V8SI_V8SI_V8SI_INT,
	V4DI_FTYPE_V4DI_V4DI_V4DI_INT, V8DI_FTYPE_V8DI_V8DI_V8DI_INT,
	V16SI_FTYPE_V16SI_V16SI_V16SI_INT, V2DI_FTYPE_V2DI_V2DI_V2DI_INT
	and V4SI_FTYPE_V4SI_V4SI_V4SI_INT.

2019-07-11  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.c (intersect_ranges): If we know the intersection is
	empty, there is no need to conservatively add anything else to
	the set.

2019-07-11  Richard Biener  <rguenther@suse.de>

	PR middle-end/91131
	* gimplify.c (gimplify_compound_literal_expr): Force a temporary
	when the object is volatile and we have not cleared it even though
	there are no nonzero elements.

2019-07-10  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (cint34_operand): Update
	SIGNED_34BIT_OFFSET_P call.
	(pcrel_address): Update SIGNED_34BIT_OFFSET_P call.
	(pcrel_external_address): Update SIGNED_34BIT_OFFSET_P call.
	* config/rs6000/rs6000.c (rs6000_prefixed_address): Update
	SIGNED_16BIT_OFFSET_P and SIGNED_34BIT_OFFSET_P calls.
	* config/rs6000/rs6000.h (SIGNED_16BIT_OFFSET_P): Remove EXTRA
	argument.
	(SIGNED_34BIT_OFFSET_P): Remove EXTRA argument.
	(SIGNED_16BIT_OFFSET_EXTRA_P): New macro, like
	SIGNED_16BIT_OFFSET_P with an EXTRA argument.
	(SIGNED_34BIT_OFFSET_EXTRA_P): New macro, like
	SIGNED_34BIT_OFFSET_P with an EXTRA argument.

2019-07-10  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.h (LIB_SPEC): Collate this spec here.
	* config/rs6000/darwin7.h (LIB_SPEC): Remove.
	* config/rs6000/darwin8.h (LIB_SPEC): Remove.
	(DEF_MIN_OSX_VERSION): New.

2019-07-10  Richard Sandiford  <richard.sandiford@arm.com>

	* fold-const.c (fold_relational_const): Fix folding of
	vector-to-scalar NE_EXPRs.
	(test_vector_folding): Add more tests.

2019-07-10  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/91060
	* config/arm/iterators.md (V2DI_ONLY): New mode iterator.
	* config/arm/neon.md (vec_set<mode>_internal): Add a '@' prefix.
	(vec_setv2di_internal): Reexpress as...
	(@vec_set<V2DI_ONLY:mode>_internal): ...this.
	* config/arm/arm.c (neon_expand_vector_init): Use gen_vec_set_internal
	rather than gen_neon_vset_lane<mode>.

2019-07-10  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/91102
	* lra-constraints.c (process_alt_operands): Don't match user
	defined regs only if they are early clobbers.

2019-07-10  Marc Glisse  <marc.glisse@inria.fr>

	* wide-int.h (wi::lshift): Reject negative values for the fast path.

2019-07-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91126
	* tree-ssa-sccvn.c (n_walk_cb_data::push_partial_def): Adjust
	native encoding offset for BYTES_BIG_ENDIAN.
	(vn_reference_lookup_3): Likewise.

2019-07-10  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_reference_lookup_3): Look at valueized
	LHS whenever possible.

2019-07-09  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (nonoverlapping_component_refs_p_1): Break out
	from ...; work also on duplicated types.
	(nonoverlapping_component_refs_since_match): ... here
	(ncr_type_uid): Break out from ...
	(ncr_compar): ... here; look for TYPE_UID of canonical type if
	available.
	(nonoverlapping_component_refs_p): Use same_type_for_tbaa to match
	the types and nonoverlapping_component_refs_p_1 to disambiguate.

2019-07-09  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/90989
	* tree-ssa-strlen.c (handle_char_store): Constrain a single character
	optimization to just single character stores.

2019-07-09  Joern Rennecke  <joern.rennecke@riscy-ip.com>

	* tree-vect-stmts.c (vectorizable_comparison) <!slp_node>:
	Swap operands only once.

2019-07-09  Dragan Mladjenovic  <dmladjenovic@wavecomp.com>

	* cfgcleanup.c (old_insns_match_p): Check if used hard regs set is equal
	for both call instructions.

2019-07-09  John Darrington  <john@darrington.wattle.id.au>

	* simplify-rtx.c (simplify_unary_operation_1): Use GET_MODE_PRECISION
	rather than GET_MODE_BITSIZE to better handle partial integer modes.

2019-07-09  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000-internal.h (create_TOC_reference): Delete.
	* config/rs6000/rs6000-logue.c (create_TOC_reference): Move
	function from rs6000-logue.c back to rs6000.c.
	* config/rs6000/rs6000.c (create_TOC_reference): Likewise.

2019-07-09  Martin Sebor  <msebor@redhat.com>

	PR c++/61339
	* auto-profile.c: Change class-key of PODs to struct and others
	to class.
	* basic-block.h: Same.
	* bitmap.c (bitmap_alloc): Same.
	* bitmap.h: Same.
	* builtins.c (expand_builtin_prefetch): Same.
	(expand_builtin_interclass_mathfn): Same.
	(expand_builtin_strlen): Same.
	(expand_builtin_mempcpy_args): Same.
	(expand_cmpstr): Same.
	(expand_builtin___clear_cache): Same.
	(expand_ifn_atomic_bit_test_and): Same.
	(expand_builtin_thread_pointer): Same.
	(expand_builtin_set_thread_pointer): Same.
	* caller-save.c (setup_save_areas): Same.
	(replace_reg_with_saved_mem): Same.
	(insert_restore): Same.
	(insert_save): Same.
	(add_used_regs): Same.
	* cfg.c (get_bb_copy): Same.
	(set_loop_copy): Same.
	* cfg.h: Same.
	* cfganal.h: Same.
	* cfgexpand.c (alloc_stack_frame_space): Same.
	(add_stack_var): Same.
	(add_stack_var_conflict): Same.
	(add_scope_conflicts_1): Same.
	(update_alias_info_with_stack_vars): Same.
	(expand_used_vars): Same.
	* cfghooks.c (redirect_edge_and_branch_force): Same.
	(delete_basic_block): Same.
	(split_edge): Same.
	(make_forwarder_block): Same.
	(force_nonfallthru): Same.
	(duplicate_block): Same.
	(lv_flush_pending_stmts): Same.
	* cfghooks.h: Same.
	* cfgloop.c (flow_loops_cfg_dump): Same.
	(flow_loop_nested_p): Same.
	(superloop_at_depth): Same.
	(get_loop_latch_edges): Same.
	(flow_loop_dump): Same.
	(flow_loops_dump): Same.
	(flow_loops_free): Same.
	(flow_loop_nodes_find): Same.
	(establish_preds): Same.
	(flow_loop_tree_node_add): Same.
	(flow_loop_tree_node_remove): Same.
	(flow_loops_find): Same.
	(find_subloop_latch_edge_by_profile): Same.
	(find_subloop_latch_edge_by_ivs): Same.
	(mfb_redirect_edges_in_set): Same.
	(form_subloop): Same.
	(merge_latch_edges): Same.
	(disambiguate_multiple_latches): Same.
	(disambiguate_loops_with_multiple_latches): Same.
	(flow_bb_inside_loop_p): Same.
	(glb_enum_p): Same.
	(get_loop_body_with_size): Same.
	(get_loop_body): Same.
	(fill_sons_in_loop): Same.
	(get_loop_body_in_dom_order): Same.
	(get_loop_body_in_custom_order): Same.
	(release_recorded_exits): Same.
	(get_loop_exit_edges): Same.
	(num_loop_branches): Same.
	(remove_bb_from_loops): Same.
	(find_common_loop): Same.
	(delete_loop): Same.
	(cancel_loop): Same.
	(verify_loop_structure): Same.
	(loop_preheader_edge): Same.
	(loop_exit_edge_p): Same.
	(single_exit): Same.
	(loop_exits_to_bb_p): Same.
	(loop_exits_from_bb_p): Same.
	(get_loop_location): Same.
	(record_niter_bound): Same.
	(get_estimated_loop_iterations_int): Same.
	(max_stmt_executions_int): Same.
	(likely_max_stmt_executions_int): Same.
	(get_estimated_loop_iterations): Same.
	(get_max_loop_iterations): Same.
	(get_max_loop_iterations_int): Same.
	(get_likely_max_loop_iterations): Same.
	* cfgloop.h (simple_loop_desc): Same.
	(get_loop): Same.
	(loop_depth): Same.
	(loop_outer): Same.
	(loop_iterator::next): Same.
	(loop_outermost): Same.
	* cfgloopanal.c (mark_irreducible_loops): Same.
	(num_loop_insns): Same.
	(average_num_loop_insns): Same.
	(expected_loop_iterations_unbounded): Same.
	(expected_loop_iterations): Same.
	(mark_loop_exit_edges): Same.
	(single_likely_exit): Same.
	* cfgloopmanip.c (fix_bb_placement): Same.
	(fix_bb_placements): Same.
	(remove_path): Same.
	(place_new_loop): Same.
	(add_loop): Same.
	(scale_loop_frequencies): Same.
	(scale_loop_profile): Same.
	(create_empty_if_region_on_edge): Same.
	(create_empty_loop_on_edge): Same.
	(loopify): Same.
	(unloop): Same.
	(fix_loop_placements): Same.
	(copy_loop_info): Same.
	(duplicate_loop): Same.
	(duplicate_subloops): Same.
	(loop_redirect_edge): Same.
	(can_duplicate_loop_p): Same.
	(duplicate_loop_to_header_edge): Same.
	(mfb_keep_just): Same.
	(has_preds_from_loop): Same.
	(create_preheader): Same.
	(create_preheaders): Same.
	(lv_adjust_loop_entry_edge): Same.
	(loop_version): Same.
	* cfgloopmanip.h: Same.
	* cgraph.h: Same.
	* cgraphbuild.c: Same.
	* combine.c (make_extraction): Same.
	* config/i386/i386-features.c: Same.
	* config/i386/i386-features.h: Same.
	* config/i386/i386.c (ix86_emit_outlined_ms2sysv_save): Same.
	(ix86_emit_outlined_ms2sysv_restore): Same.
	(ix86_noce_conversion_profitable_p): Same.
	(ix86_init_cost): Same.
	(ix86_simd_clone_usable): Same.
	* configure.ac (ACX_PROG_CXX_WARNING_OPTS): Add -Wclass-is-pod and
	Wstruct-not-pod.
	* coretypes.h: Same.
	* data-streamer-in.c (string_for_index): Change class-key of PODs
	to struct and others to class.
	(streamer_read_indexed_string): Same.
	(streamer_read_string): Same.
	(bp_unpack_indexed_string): Same.
	(bp_unpack_string): Same.
	(streamer_read_uhwi): Same.
	(streamer_read_hwi): Same.
	(streamer_read_gcov_count): Same.
	(streamer_read_wide_int): Same.
	* data-streamer.h (streamer_write_bitpack): Same.
	(bp_unpack_value): Same.
	(streamer_write_char_stream): Same.
	(streamer_write_hwi_in_range): Same.
	(streamer_write_record_start): Same.
	* ddg.c (create_ddg_dep_from_intra_loop_link): Same.
	(add_cross_iteration_register_deps): Same.
	(build_intra_loop_deps): Same.
	* df-core.c (df_analyze): Same.
	(loop_post_order_compute): Same.
	(loop_inverted_post_order_compute): Same.
	* df-problems.c (df_rd_alloc): Same.
	(df_rd_simulate_one_insn): Same.
	(df_rd_local_compute): Same.
	(df_rd_init_solution): Same.
	(df_rd_confluence_n): Same.
	(df_rd_transfer_function): Same.
	(df_rd_free): Same.
	(df_rd_dump_defs_set): Same.
	(df_rd_top_dump): Same.
	(df_lr_alloc): Same.
	(df_lr_reset): Same.
	(df_lr_local_compute): Same.
	(df_lr_init): Same.
	(df_lr_confluence_n): Same.
	(df_lr_free): Same.
	(df_lr_top_dump): Same.
	(df_lr_verify_transfer_functions): Same.
	(df_live_alloc): Same.
	(df_live_reset): Same.
	(df_live_init): Same.
	(df_live_confluence_n): Same.
	(df_live_finalize): Same.
	(df_live_free): Same.
	(df_live_top_dump): Same.
	(df_live_verify_transfer_functions): Same.
	(df_mir_alloc): Same.
	(df_mir_reset): Same.
	(df_mir_init): Same.
	(df_mir_confluence_n): Same.
	(df_mir_free): Same.
	(df_mir_top_dump): Same.
	(df_word_lr_alloc): Same.
	(df_word_lr_reset): Same.
	(df_word_lr_init): Same.
	(df_word_lr_confluence_n): Same.
	(df_word_lr_free): Same.
	(df_word_lr_top_dump): Same.
	(df_md_alloc): Same.
	(df_md_simulate_one_insn): Same.
	(df_md_reset): Same.
	(df_md_init): Same.
	(df_md_free): Same.
	(df_md_top_dump): Same.
	* df-scan.c (df_insn_delete): Same.
	(df_insn_rescan): Same.
	(df_notes_rescan): Same.
	(df_sort_and_compress_mws): Same.
	(df_install_mws): Same.
	(df_refs_add_to_chains): Same.
	(df_ref_create_structure): Same.
	(df_ref_record): Same.
	(df_def_record_1): Same.
	(df_find_hard_reg_defs): Same.
	(df_uses_record): Same.
	(df_get_conditional_uses): Same.
	(df_get_call_refs): Same.
	(df_recompute_luids): Same.
	(df_get_entry_block_def_set): Same.
	(df_entry_block_defs_collect): Same.
	(df_get_exit_block_use_set): Same.
	(df_exit_block_uses_collect): Same.
	(df_mws_verify): Same.
	(df_bb_verify): Same.
	* df.h (df_scan_get_bb_info): Same.
	* doc/tm.texi: Same.
	* dse.c (record_store): Same.
	* dumpfile.h: Same.
	* emit-rtl.c (const_fixed_hasher::equal): Same.
	(set_mem_attributes_minus_bitpos): Same.
	(change_address): Same.
	(adjust_address_1): Same.
	(offset_address): Same.
	* emit-rtl.h: Same.
	* except.c (dw2_build_landing_pads): Same.
	(sjlj_emit_dispatch_table): Same.
	* explow.c (allocate_dynamic_stack_space): Same.
	(emit_stack_probe): Same.
	(probe_stack_range): Same.
	* expmed.c (store_bit_field_using_insv): Same.
	(store_bit_field_1): Same.
	(store_integral_bit_field): Same.
	(extract_bit_field_using_extv): Same.
	(extract_bit_field_1): Same.
	(emit_cstore): Same.
	* expr.c (emit_block_move_via_cpymem): Same.
	(expand_cmpstrn_or_cmpmem): Same.
	(set_storage_via_setmem): Same.
	(emit_single_push_insn_1): Same.
	(expand_assignment): Same.
	(store_constructor): Same.
	(expand_expr_real_2): Same.
	(expand_expr_real_1): Same.
	(try_casesi): Same.
	* flags.h: Same.
	* function.c (try_fit_stack_local): Same.
	(assign_stack_local_1): Same.
	(assign_stack_local): Same.
	(cut_slot_from_list): Same.
	(insert_slot_to_list): Same.
	(max_slot_level): Same.
	(move_slot_to_level): Same.
	(temp_address_hasher::equal): Same.
	(remove_unused_temp_slot_addresses): Same.
	(assign_temp): Same.
	(combine_temp_slots): Same.
	(update_temp_slot_address): Same.
	(preserve_temp_slots): Same.
	* function.h: Same.
	* fwprop.c: Same.
	* gcc-rich-location.h: Same.
	* gcov.c: Same.
	* genattrtab.c (check_attr_test): Same.
	(check_attr_value): Same.
	(convert_set_attr_alternative): Same.
	(convert_set_attr): Same.
	(check_defs): Same.
	(copy_boolean): Same.
	(get_attr_value): Same.
	(expand_delays): Same.
	(make_length_attrs): Same.
	(min_fn): Same.
	(make_alternative_compare): Same.
	(simplify_test_exp): Same.
	(tests_attr_p): Same.
	(get_attr_order): Same.
	(clear_struct_flag): Same.
	(gen_attr): Same.
	(compares_alternatives_p): Same.
	(gen_insn): Same.
	(gen_delay): Same.
	(find_attrs_to_cache): Same.
	(write_test_expr): Same.
	(walk_attr_value): Same.
	(write_attr_get): Same.
	(eliminate_known_true): Same.
	(write_insn_cases): Same.
	(write_attr_case): Same.
	(write_attr_valueq): Same.
	(write_attr_value): Same.
	(write_dummy_eligible_delay): Same.
	(next_comma_elt): Same.
	(find_attr): Same.
	(make_internal_attr): Same.
	(copy_rtx_unchanging): Same.
	(gen_insn_reserv): Same.
	(check_tune_attr): Same.
	(make_automaton_attrs): Same.
	(handle_arg): Same.
	* genextract.c (gen_insn): Same.
	(VEC_char_to_string): Same.
	* genmatch.c (print_operand): Same.
	(lower): Same.
	(parser::parse_operation): Same.
	(parser::parse_capture): Same.
	(parser::parse_c_expr): Same.
	(parser::parse_simplify): Same.
	(main): Same.
	* genoutput.c (output_operand_data): Same.
	(output_get_insn_name): Same.
	(compare_operands): Same.
	(place_operands): Same.
	(process_template): Same.
	(validate_insn_alternatives): Same.
	(validate_insn_operands): Same.
	(gen_expand): Same.
	(note_constraint): Same.
	* genpreds.c (write_one_predicate_function): Same.
	(add_constraint): Same.
	(process_define_register_constraint): Same.
	(write_lookup_constraint_1): Same.
	(write_lookup_constraint_array): Same.
	(write_insn_constraint_len): Same.
	(write_reg_class_for_constraint_1): Same.
	(write_constraint_satisfied_p_array): Same.
	* genrecog.c (optimize_subroutine_group): Same.
	* gensupport.c (process_define_predicate): Same.
	(queue_pattern): Same.
	(remove_from_queue): Same.
	(process_rtx): Same.
	(is_predicable): Same.
	(change_subst_attribute): Same.
	(subst_pattern_match): Same.
	(alter_constraints): Same.
	(alter_attrs_for_insn): Same.
	(shift_output_template): Same.
	(alter_output_for_subst_insn): Same.
	(process_one_cond_exec): Same.
	(subst_dup): Same.
	(process_define_cond_exec): Same.
	(mnemonic_htab_callback): Same.
	(gen_mnemonic_attr): Same.
	(read_md_rtx): Same.
	* ggc-page.c: Same.
	* gimple-loop-interchange.cc (dump_reduction): Same.
	(dump_induction): Same.
	(loop_cand::~loop_cand): Same.
	(free_data_refs_with_aux): Same.
	(tree_loop_interchange::interchange_loops): Same.
	(tree_loop_interchange::map_inductions_to_loop): Same.
	(tree_loop_interchange::move_code_to_inner_loop): Same.
	(compute_access_stride): Same.
	(compute_access_strides): Same.
	(proper_loop_form_for_interchange): Same.
	(tree_loop_interchange_compute_ddrs): Same.
	(prune_datarefs_not_in_loop): Same.
	(prepare_data_references): Same.
	(pass_linterchange::execute): Same.
	* gimple-loop-jam.c (bb_prevents_fusion_p): Same.
	(unroll_jam_possible_p): Same.
	(fuse_loops): Same.
	(adjust_unroll_factor): Same.
	(tree_loop_unroll_and_jam): Same.
	* gimple-loop-versioning.cc (loop_versioning::~loop_versioning): Same.
	(loop_versioning::expensive_stmt_p): Same.
	(loop_versioning::version_for_unity): Same.
	(loop_versioning::dump_inner_likelihood): Same.
	(loop_versioning::find_per_loop_multiplication): Same.
	(loop_versioning::analyze_term_using_scevs): Same.
	(loop_versioning::record_address_fragment): Same.
	(loop_versioning::analyze_expr): Same.
	(loop_versioning::analyze_blocks): Same.
	(loop_versioning::prune_conditions): Same.
	(loop_versioning::merge_loop_info): Same.
	(loop_versioning::add_loop_to_queue): Same.
	(loop_versioning::decide_whether_loop_is_versionable): Same.
	(loop_versioning::make_versioning_decisions): Same.
	(loop_versioning::implement_versioning_decisions): Same.
	* gimple-ssa-evrp-analyze.c
	(evrp_range_analyzer::record_ranges_from_phis): Same.
	* gimple-ssa-store-merging.c (split_store::split_store): Same.
	(count_multiple_uses): Same.
	(split_group): Same.
	(imm_store_chain_info::output_merged_store): Same.
	(pass_store_merging::process_store): Same.
	* gimple-ssa-strength-reduction.c (slsr_process_phi): Same.
	* gimple-ssa-warn-alloca.c (adjusted_warn_limit): Same.
	(is_max): Same.
	(alloca_call_type): Same.
	(pass_walloca::execute): Same.
	* gimple-streamer-in.c (input_phi): Same.
	(input_gimple_stmt): Same.
	* gimple-streamer.h: Same.
	* godump.c (go_force_record_alignment): Same.
	(go_format_type): Same.
	(go_output_type): Same.
	(go_output_fndecl): Same.
	(go_output_typedef): Same.
	(keyword_hash_init): Same.
	(find_dummy_types): Same.
	* graph.c (draw_cfg_nodes_no_loops): Same.
	(draw_cfg_nodes_for_loop): Same.
	* hard-reg-set.h (hard_reg_set_iter_next): Same.
	* hsa-brig.c: Same.
	* hsa-common.h (hsa_internal_fn_hasher::equal): Same.
	* hsa-dump.c (dump_hsa_cfun): Same.
	* hsa-gen.c (gen_function_def_parameters): Same.
	* hsa-regalloc.c (dump_hsa_cfun_regalloc): Same.
	* input.c (dump_line_table_statistics): Same.
	(test_lexer): Same.
	* input.h: Same.
	* internal-fn.c (get_multi_vector_move): Same.
	(expand_load_lanes_optab_fn): Same.
	(expand_GOMP_SIMT_ENTER_ALLOC): Same.
	(expand_GOMP_SIMT_EXIT): Same.
	(expand_GOMP_SIMT_LAST_LANE): Same.
	(expand_GOMP_SIMT_ORDERED_PRED): Same.
	(expand_GOMP_SIMT_VOTE_ANY): Same.
	(expand_GOMP_SIMT_XCHG_BFLY): Same.
	(expand_GOMP_SIMT_XCHG_IDX): Same.
	(expand_addsub_overflow): Same.
	(expand_neg_overflow): Same.
	(expand_mul_overflow): Same.
	(expand_call_mem_ref): Same.
	(expand_mask_load_optab_fn): Same.
	(expand_scatter_store_optab_fn): Same.
	(expand_gather_load_optab_fn): Same.
	* ipa-cp.c (ipa_get_parm_lattices): Same.
	(print_all_lattices): Same.
	(ignore_edge_p): Same.
	(build_toporder_info): Same.
	(free_toporder_info): Same.
	(push_node_to_stack): Same.
	(ipcp_lattice<valtype>::set_contains_variable): Same.
	(set_agg_lats_to_bottom): Same.
	(ipcp_bits_lattice::meet_with): Same.
	(set_single_call_flag): Same.
	(initialize_node_lattices): Same.
	(ipa_get_jf_ancestor_result): Same.
	(ipcp_verify_propagated_values): Same.
	(propagate_scalar_across_jump_function): Same.
	(propagate_context_across_jump_function): Same.
	(propagate_bits_across_jump_function): Same.
	(ipa_vr_operation_and_type_effects): Same.
	(propagate_vr_across_jump_function): Same.
	(set_check_aggs_by_ref): Same.
	(set_chain_of_aglats_contains_variable): Same.
	(merge_aggregate_lattices): Same.
	(agg_pass_through_permissible_p): Same.
	(propagate_aggs_across_jump_function): Same.
	(call_passes_through_thunk_p): Same.
	(propagate_constants_across_call): Same.
	(devirtualization_time_bonus): Same.
	(good_cloning_opportunity_p): Same.
	(context_independent_aggregate_values): Same.
	(gather_context_independent_values): Same.
	(perform_estimation_of_a_value): Same.
	(estimate_local_effects): Same.
	(value_topo_info<valtype>::add_val): Same.
	(add_all_node_vals_to_toposort): Same.
	(value_topo_info<valtype>::propagate_effects): Same.
	(ipcp_propagate_stage): Same.
	(ipcp_discover_new_direct_edges): Same.
	(same_node_or_its_all_contexts_clone_p): Same.
	(cgraph_edge_brings_value_p): Same.
	(gather_edges_for_value): Same.
	(create_specialized_node): Same.
	(find_more_scalar_values_for_callers_subset): Same.
	(find_more_contexts_for_caller_subset): Same.
	(copy_plats_to_inter): Same.
	(intersect_aggregates_with_edge): Same.
	(find_aggregate_values_for_callers_subset): Same.
	(cgraph_edge_brings_all_agg_vals_for_node): Same.
	(decide_about_value): Same.
	(decide_whether_version_node): Same.
	(spread_undeadness): Same.
	(identify_dead_nodes): Same.
	(ipcp_store_vr_results): Same.
	* ipa-devirt.c (final_warning_record::grow_type_warnings): Same.
	* ipa-fnsummary.c (ipa_fn_summary::account_size_time): Same.
	(redirect_to_unreachable): Same.
	(edge_set_predicate): Same.
	(evaluate_conditions_for_known_args): Same.
	(evaluate_properties_for_edge): Same.
	(ipa_fn_summary_t::duplicate): Same.
	(ipa_call_summary_t::duplicate): Same.
	(dump_ipa_call_summary): Same.
	(ipa_dump_fn_summary): Same.
	(eliminated_by_inlining_prob): Same.
	(set_cond_stmt_execution_predicate): Same.
	(set_switch_stmt_execution_predicate): Same.
	(compute_bb_predicates): Same.
	(will_be_nonconstant_expr_predicate): Same.
	(phi_result_unknown_predicate): Same.
	(analyze_function_body): Same.
	(compute_fn_summary): Same.
	(estimate_edge_devirt_benefit): Same.
	(estimate_edge_size_and_time): Same.
	(estimate_calls_size_and_time): Same.
	(estimate_node_size_and_time): Same.
	(remap_edge_change_prob): Same.
	(remap_edge_summaries): Same.
	(ipa_merge_fn_summary_after_inlining): Same.
	(ipa_fn_summary_generate): Same.
	(inline_read_section): Same.
	(ipa_fn_summary_read): Same.
	(ipa_fn_summary_write): Same.
	* ipa-fnsummary.h: Same.
	* ipa-hsa.c (ipa_hsa_read_section): Same.
	* ipa-icf-gimple.c (func_checker::compare_loops): Same.
	* ipa-icf.c (sem_function::param_used_p): Same.
	* ipa-inline-analysis.c (do_estimate_edge_time): Same.
	* ipa-inline.c (edge_badness): Same.
	(inline_small_functions): Same.
	* ipa-polymorphic-call.c
	(ipa_polymorphic_call_context::stream_out): Same.
	* ipa-predicate.c (predicate::remap_after_duplication): Same.
	(predicate::remap_after_inlining): Same.
	(predicate::stream_out): Same.
	* ipa-predicate.h: Same.
	* ipa-profile.c (ipa_profile_read_summary): Same.
	* ipa-prop.c (ipa_get_param_decl_index_1): Same.
	(count_formal_params): Same.
	(ipa_dump_param): Same.
	(ipa_alloc_node_params): Same.
	(ipa_print_node_jump_functions_for_edge): Same.
	(ipa_print_node_jump_functions): Same.
	(ipa_load_from_parm_agg): Same.
	(get_ancestor_addr_info): Same.
	(ipa_compute_jump_functions_for_edge): Same.
	(ipa_analyze_virtual_call_uses): Same.
	(ipa_analyze_stmt_uses): Same.
	(ipa_analyze_params_uses_in_bb): Same.
	(update_jump_functions_after_inlining): Same.
	(try_decrement_rdesc_refcount): Same.
	(ipa_impossible_devirt_target): Same.
	(update_indirect_edges_after_inlining): Same.
	(combine_controlled_uses_counters): Same.
	(ipa_edge_args_sum_t::duplicate): Same.
	(ipa_write_jump_function): Same.
	(ipa_write_indirect_edge_info): Same.
	(ipa_write_node_info): Same.
	(ipa_read_edge_info): Same.
	(ipa_prop_read_section): Same.
	(read_replacements_section): Same.
	* ipa-prop.h (ipa_get_param_count): Same.
	(ipa_get_param): Same.
	(ipa_get_type): Same.
	(ipa_get_param_move_cost): Same.
	(ipa_set_param_used): Same.
	(ipa_get_controlled_uses): Same.
	(ipa_set_controlled_uses): Same.
	(ipa_get_cs_argument_count): Same.
	* ipa-pure-const.c (analyze_function): Same.
	(pure_const_read_summary): Same.
	* ipa-ref.h: Same.
	* ipa-reference.c (ipa_reference_read_optimization_summary): Same.
	* ipa-split.c (test_nonssa_use): Same.
	(dump_split_point): Same.
	(dominated_by_forbidden): Same.
	(split_part_set_ssa_name_p): Same.
	(find_split_points): Same.
	* ira-build.c (finish_loop_tree_nodes): Same.
	(low_pressure_loop_node_p): Same.
	* ira-color.c (ira_reuse_stack_slot): Same.
	* ira-int.h: Same.
	* ira.c (setup_reg_equiv): Same.
	(print_insn_chain): Same.
	(ira): Same.
	* loop-doloop.c (doloop_condition_get): Same.
	(add_test): Same.
	(record_reg_sets): Same.
	(doloop_optimize): Same.
	* loop-init.c (loop_optimizer_init): Same.
	(fix_loop_structure): Same.
	* loop-invariant.c (merge_identical_invariants): Same.
	(compute_always_reached): Same.
	(find_exits): Same.
	(may_assign_reg_p): Same.
	(find_invariants_bb): Same.
	(find_invariants_body): Same.
	(replace_uses): Same.
	(can_move_invariant_reg): Same.
	(free_inv_motion_data): Same.
	(move_single_loop_invariants): Same.
	(change_pressure): Same.
	(mark_ref_regs): Same.
	(calculate_loop_reg_pressure): Same.
	* loop-iv.c (biv_entry_hasher::equal): Same.
	(iv_extend_to_rtx_code): Same.
	(check_iv_ref_table_size): Same.
	(clear_iv_info): Same.
	(latch_dominating_def): Same.
	(iv_get_reaching_def): Same.
	(iv_constant): Same.
	(iv_subreg): Same.
	(iv_extend): Same.
	(iv_neg): Same.
	(iv_add): Same.
	(iv_mult): Same.
	(get_biv_step): Same.
	(record_iv): Same.
	(analyzed_for_bivness_p): Same.
	(record_biv): Same.
	(iv_analyze_biv): Same.
	(iv_analyze_expr): Same.
	(iv_analyze_def): Same.
	(iv_analyze_op): Same.
	(iv_analyze): Same.
	(iv_analyze_result): Same.
	(biv_p): Same.
	(eliminate_implied_conditions): Same.
	(simplify_using_initial_values): Same.
	(shorten_into_mode): Same.
	(canonicalize_iv_subregs): Same.
	(determine_max_iter): Same.
	(check_simple_exit): Same.
	(find_simple_exit): Same.
	(get_simple_loop_desc): Same.
	* loop-unroll.c (report_unroll): Same.
	(decide_unrolling): Same.
	(unroll_loops): Same.
	(loop_exit_at_end_p): Same.
	(decide_unroll_constant_iterations): Same.
	(unroll_loop_constant_iterations): Same.
	(compare_and_jump_seq): Same.
	(unroll_loop_runtime_iterations): Same.
	(decide_unroll_stupid): Same.
	(unroll_loop_stupid): Same.
	(referenced_in_one_insn_in_loop_p): Same.
	(reset_debug_uses_in_loop): Same.
	(analyze_iv_to_split_insn): Same.
	* lra-eliminations.c (lra_debug_elim_table): Same.
	(setup_can_eliminate): Same.
	(form_sum): Same.
	(lra_get_elimination_hard_regno): Same.
	(lra_eliminate_regs_1): Same.
	(eliminate_regs_in_insn): Same.
	(update_reg_eliminate): Same.
	(init_elimination): Same.
	(lra_eliminate): Same.
	* lra-int.h: Same.
	* lra-lives.c (initiate_live_solver): Same.
	* lra-remat.c (create_remat_bb_data): Same.
	* lra-spills.c (lra_spill): Same.
	* lra.c (lra_set_insn_recog_data): Same.
	(lra_set_used_insn_alternative_by_uid): Same.
	(init_reg_info): Same.
	(expand_reg_info): Same.
	* lto-cgraph.c (output_symtab): Same.
	(read_identifier): Same.
	(get_alias_symbol): Same.
	(input_node): Same.
	(input_varpool_node): Same.
	(input_ref): Same.
	(input_edge): Same.
	(input_cgraph_1): Same.
	(input_refs): Same.
	(input_symtab): Same.
	(input_offload_tables): Same.
	(output_cgraph_opt_summary): Same.
	(input_edge_opt_summary): Same.
	(input_cgraph_opt_section): Same.
	* lto-section-in.c (lto_free_raw_section_data): Same.
	(lto_create_simple_input_block): Same.
	(lto_free_function_in_decl_state_for_node): Same.
	* lto-streamer-in.c (lto_tag_check_set): Same.
	(lto_location_cache::revert_location_cache): Same.
	(lto_location_cache::input_location): Same.
	(lto_input_location): Same.
	(stream_input_location_now): Same.
	(lto_input_tree_ref): Same.
	(lto_input_eh_catch_list): Same.
	(input_eh_region): Same.
	(lto_init_eh): Same.
	(make_new_block): Same.
	(input_cfg): Same.
	(fixup_call_stmt_edges): Same.
	(input_struct_function_base): Same.
	(input_function): Same.
	(lto_read_body_or_constructor): Same.
	(lto_read_tree_1): Same.
	(lto_read_tree): Same.
	(lto_input_scc): Same.
	(lto_input_tree_1): Same.
	(lto_input_toplevel_asms): Same.
	(lto_input_mode_table): Same.
	(lto_reader_init): Same.
	(lto_data_in_create): Same.
	* lto-streamer-out.c (output_cfg): Same.
	* lto-streamer.h: Same.
	* modulo-sched.c (duplicate_insns_of_cycles): Same.
	(generate_prolog_epilog): Same.
	(mark_loop_unsched): Same.
	(dump_insn_location): Same.
	(loop_canon_p): Same.
	(sms_schedule): Same.
	* omp-expand.c (expand_omp_for_ordered_loops): Same.
	(expand_omp_for_generic): Same.
	(expand_omp_for_static_nochunk): Same.
	(expand_omp_for_static_chunk): Same.
	(expand_omp_simd): Same.
	(expand_omp_taskloop_for_inner): Same.
	(expand_oacc_for): Same.
	(expand_omp_atomic_pipeline): Same.
	(mark_loops_in_oacc_kernels_region): Same.
	* omp-offload.c (oacc_xform_loop): Same.
	* omp-simd-clone.c (simd_clone_adjust): Same.
	* optabs-query.c (get_traditional_extraction_insn): Same.
	* optabs.c (expand_vector_broadcast): Same.
	(expand_binop_directly): Same.
	(expand_twoval_unop): Same.
	(expand_twoval_binop): Same.
	(expand_unop_direct): Same.
	(emit_indirect_jump): Same.
	(emit_conditional_move): Same.
	(emit_conditional_neg_or_complement): Same.
	(emit_conditional_add): Same.
	(vector_compare_rtx): Same.
	(expand_vec_perm_1): Same.
	(expand_vec_perm_const): Same.
	(expand_vec_cond_expr): Same.
	(expand_vec_series_expr): Same.
	(maybe_emit_atomic_exchange): Same.
	(maybe_emit_sync_lock_test_and_set): Same.
	(expand_atomic_compare_and_swap): Same.
	(expand_atomic_load): Same.
	(expand_atomic_store): Same.
	(maybe_emit_op): Same.
	(valid_multiword_target_p): Same.
	(create_integer_operand): Same.
	(maybe_legitimize_operand_same_code): Same.
	(maybe_legitimize_operand): Same.
	(create_convert_operand_from_type): Same.
	(can_reuse_operands_p): Same.
	(maybe_legitimize_operands): Same.
	(maybe_gen_insn): Same.
	(maybe_expand_insn): Same.
	(maybe_expand_jump_insn): Same.
	(expand_insn): Same.
	* optabs.h (create_expand_operand): Same.
	(create_fixed_operand): Same.
	(create_output_operand): Same.
	(create_input_operand): Same.
	(create_convert_operand_to): Same.
	(create_convert_operand_from): Same.
	* optinfo.h: Same.
	* poly-int.h: Same.
	* predict.c (optimize_insn_for_speed_p): Same.
	(optimize_loop_for_size_p): Same.
	(optimize_loop_for_speed_p): Same.
	(optimize_loop_nest_for_speed_p): Same.
	(get_base_value): Same.
	(predicted_by_loop_heuristics_p): Same.
	(predict_extra_loop_exits): Same.
	(predict_loops): Same.
	(predict_paths_for_bb): Same.
	(predict_paths_leading_to): Same.
	(propagate_freq): Same.
	(pass_profile::execute): Same.
	* predict.h: Same.
	* profile-count.c (profile_count::differs_from_p): Same.
	(profile_probability::differs_lot_from_p): Same.
	* profile-count.h: Same.
	* profile.c (branch_prob): Same.
	* regrename.c (free_chain_data): Same.
	(mark_conflict): Same.
	(create_new_chain): Same.
	(merge_overlapping_regs): Same.
	(init_rename_info): Same.
	(merge_chains): Same.
	(regrename_analyze): Same.
	(regrename_do_replace): Same.
	(scan_rtx_reg): Same.
	(record_out_operands): Same.
	(build_def_use): Same.
	* regrename.h: Same.
	* reload.h: Same.
	* reload1.c (init_reload): Same.
	(maybe_fix_stack_asms): Same.
	(copy_reloads): Same.
	(count_pseudo): Same.
	(count_spilled_pseudo): Same.
	(find_reg): Same.
	(find_reload_regs): Same.
	(select_reload_regs): Same.
	(spill_hard_reg): Same.
	(fixup_eh_region_note): Same.
	(set_reload_reg): Same.
	(allocate_reload_reg): Same.
	(compute_reload_subreg_offset): Same.
	(reload_adjust_reg_for_icode): Same.
	(emit_input_reload_insns): Same.
	(emit_output_reload_insns): Same.
	(do_input_reload): Same.
	(inherit_piecemeal_p): Same.
	* rtl.h: Same.
	* sanopt.c (maybe_get_dominating_check): Same.
	(maybe_optimize_ubsan_ptr_ifn): Same.
	(can_remove_asan_check): Same.
	(maybe_optimize_asan_check_ifn): Same.
	(sanopt_optimize_walker): Same.
	* sched-deps.c (add_dependence_list): Same.
	(chain_to_prev_insn): Same.
	(add_insn_mem_dependence): Same.
	(create_insn_reg_set): Same.
	(maybe_extend_reg_info_p): Same.
	(sched_analyze_reg): Same.
	(sched_analyze_1): Same.
	(get_implicit_reg_pending_clobbers): Same.
	(chain_to_prev_insn_p): Same.
	(deps_analyze_insn): Same.
	(deps_start_bb): Same.
	(sched_free_deps): Same.
	(init_deps): Same.
	(init_deps_reg_last): Same.
	(free_deps): Same.
	* sched-ebb.c: Same.
	* sched-int.h: Same.
	* sched-rgn.c (add_branch_dependences): Same.
	(concat_insn_mem_list): Same.
	(deps_join): Same.
	(sched_rgn_compute_dependencies): Same.
	* sel-sched-ir.c (reset_target_context): Same.
	(copy_deps_context): Same.
	(init_id_from_df): Same.
	(has_dependence_p): Same.
	(change_loops_latches): Same.
	(bb_top_order_comparator): Same.
	(make_region_from_loop_preheader): Same.
	(sel_init_pipelining): Same.
	(get_loop_nest_for_rgn): Same.
	(make_regions_from_the_rest): Same.
	(sel_is_loop_preheader_p): Same.
	* sel-sched-ir.h (inner_loop_header_p): Same.
	(get_all_loop_exits): Same.
	* selftest.h: Same.
	* sese.c (sese_build_liveouts): Same.
	(sese_insert_phis_for_liveouts): Same.
	* sese.h (defined_in_sese_p): Same.
	* sreal.c (sreal::stream_out): Same.
	* sreal.h: Same.
	* streamer-hooks.h: Same.
	* target-globals.c (save_target_globals): Same.
	* target-globals.h: Same.
	* target.def: Same.
	* target.h: Same.
	* targhooks.c (default_has_ifunc_p): Same.
	(default_empty_mask_is_expensive): Same.
	(default_init_cost): Same.
	* targhooks.h: Same.
	* toplev.c: Same.
	* tree-affine.c (aff_combination_mult): Same.
	(aff_combination_expand): Same.
	(aff_combination_constant_multiple_p): Same.
	* tree-affine.h: Same.
	* tree-cfg.c (build_gimple_cfg): Same.
	(replace_loop_annotate_in_block): Same.
	(replace_uses_by): Same.
	(remove_bb): Same.
	(dump_cfg_stats): Same.
	(gimple_duplicate_sese_region): Same.
	(gimple_duplicate_sese_tail): Same.
	(move_block_to_fn): Same.
	(replace_block_vars_by_duplicates): Same.
	(move_sese_region_to_fn): Same.
	(print_loops_bb): Same.
	(print_loop): Same.
	(print_loops): Same.
	(debug): Same.
	(debug_loops): Same.
	* tree-cfg.h: Same.
	* tree-chrec.c (chrec_fold_plus_poly_poly): Same.
	(chrec_fold_multiply_poly_poly): Same.
	(chrec_evaluate): Same.
	(chrec_component_in_loop_num): Same.
	(reset_evolution_in_loop): Same.
	(is_multivariate_chrec): Same.
	(chrec_contains_symbols): Same.
	(nb_vars_in_chrec): Same.
	(chrec_convert_1): Same.
	(chrec_convert_aggressive): Same.
	* tree-chrec.h: Same.
	* tree-core.h: Same.
	* tree-data-ref.c (dump_data_dependence_relation): Same.
	(canonicalize_base_object_address): Same.
	(data_ref_compare_tree): Same.
	(prune_runtime_alias_test_list): Same.
	(get_segment_min_max): Same.
	(create_intersect_range_checks): Same.
	(conflict_fn_no_dependence): Same.
	(object_address_invariant_in_loop_p): Same.
	(analyze_ziv_subscript): Same.
	(analyze_siv_subscript_cst_affine): Same.
	(analyze_miv_subscript): Same.
	(analyze_overlapping_iterations): Same.
	(build_classic_dist_vector_1): Same.
	(add_other_self_distances): Same.
	(same_access_functions): Same.
	(build_classic_dir_vector): Same.
	(subscript_dependence_tester_1): Same.
	(subscript_dependence_tester): Same.
	(access_functions_are_affine_or_constant_p): Same.
	(get_references_in_stmt): Same.
	(loop_nest_has_data_refs): Same.
	(graphite_find_data_references_in_stmt): Same.
	(find_data_references_in_bb): Same.
	(get_base_for_alignment): Same.
	(find_loop_nest_1): Same.
	(find_loop_nest): Same.
	* tree-data-ref.h (dr_alignment): Same.
	(ddr_dependence_level): Same.
	* tree-if-conv.c (fold_build_cond_expr): Same.
	(add_to_predicate_list): Same.
	(add_to_dst_predicate_list): Same.
	(phi_convertible_by_degenerating_args): Same.
	(idx_within_array_bound): Same.
	(all_preds_critical_p): Same.
	(pred_blocks_visited_p): Same.
	(predicate_bbs): Same.
	(build_region): Same.
	(if_convertible_loop_p_1): Same.
	(is_cond_scalar_reduction): Same.
	(predicate_scalar_phi): Same.
	(remove_conditions_and_labels): Same.
	(combine_blocks): Same.
	(version_loop_for_if_conversion): Same.
	(versionable_outer_loop_p): Same.
	(ifcvt_local_dce): Same.
	(tree_if_conversion): Same.
	(pass_if_conversion::gate): Same.
	* tree-if-conv.h: Same.
	* tree-inline.c (maybe_move_debug_stmts_to_successors): Same.
	* tree-loop-distribution.c (bb_top_order_cmp): Same.
	(free_rdg): Same.
	(stmt_has_scalar_dependences_outside_loop): Same.
	(copy_loop_before): Same.
	(create_bb_after_loop): Same.
	(const_with_all_bytes_same): Same.
	(generate_memset_builtin): Same.
	(generate_memcpy_builtin): Same.
	(destroy_loop): Same.
	(build_rdg_partition_for_vertex): Same.
	(compute_access_range): Same.
	(data_ref_segment_size): Same.
	(latch_dominated_by_data_ref): Same.
	(compute_alias_check_pairs): Same.
	(fuse_memset_builtins): Same.
	(finalize_partitions): Same.
	(find_seed_stmts_for_distribution): Same.
	(prepare_perfect_loop_nest): Same.
	* tree-parloops.c (lambda_transform_legal_p): Same.
	(loop_parallel_p): Same.
	(reduc_stmt_res): Same.
	(add_field_for_name): Same.
	(create_call_for_reduction_1): Same.
	(replace_uses_in_bb_by): Same.
	(transform_to_exit_first_loop_alt): Same.
	(try_transform_to_exit_first_loop_alt): Same.
	(transform_to_exit_first_loop): Same.
	(num_phis): Same.
	(gen_parallel_loop): Same.
	(gather_scalar_reductions): Same.
	(get_omp_data_i_param): Same.
	(try_create_reduction_list): Same.
	(oacc_entry_exit_single_gang): Same.
	(parallelize_loops): Same.
	* tree-pass.h: Same.
	* tree-predcom.c (determine_offset): Same.
	(last_always_executed_block): Same.
	(split_data_refs_to_components): Same.
	(suitable_component_p): Same.
	(valid_initializer_p): Same.
	(find_looparound_phi): Same.
	(insert_looparound_copy): Same.
	(add_looparound_copies): Same.
	(determine_roots_comp): Same.
	(predcom_tmp_var): Same.
	(initialize_root_vars): Same.
	(initialize_root_vars_store_elim_1): Same.
	(initialize_root_vars_store_elim_2): Same.
	(finalize_eliminated_stores): Same.
	(initialize_root_vars_lm): Same.
	(remove_stmt): Same.
	(determine_unroll_factor): Same.
	(execute_pred_commoning_cbck): Same.
	(base_names_in_chain_on): Same.
	(combine_chains): Same.
	(pcom_stmt_dominates_stmt_p): Same.
	(try_combine_chains): Same.
	(prepare_initializers_chain_store_elim): Same.
	(prepare_initializers_chain): Same.
	(prepare_initializers): Same.
	(prepare_finalizers_chain): Same.
	(prepare_finalizers): Same.
	(insert_init_seqs): Same.
	* tree-scalar-evolution.c (loop_phi_node_p): Same.
	(compute_overall_effect_of_inner_loop): Same.
	(add_to_evolution_1): Same.
	(add_to_evolution): Same.
	(follow_ssa_edge_binary): Same.
	(follow_ssa_edge_expr): Same.
	(backedge_phi_arg_p): Same.
	(follow_ssa_edge_in_condition_phi_branch): Same.
	(follow_ssa_edge_in_condition_phi): Same.
	(follow_ssa_edge_inner_loop_phi): Same.
	(follow_ssa_edge): Same.
	(analyze_evolution_in_loop): Same.
	(analyze_initial_condition): Same.
	(interpret_loop_phi): Same.
	(interpret_condition_phi): Same.
	(interpret_rhs_expr): Same.
	(interpret_expr): Same.
	(interpret_gimple_assign): Same.
	(analyze_scalar_evolution_1): Same.
	(analyze_scalar_evolution): Same.
	(analyze_scalar_evolution_for_address_of): Same.
	(get_instantiated_value_entry): Same.
	(loop_closed_phi_def): Same.
	(instantiate_scev_name): Same.
	(instantiate_scev_poly): Same.
	(instantiate_scev_binary): Same.
	(instantiate_scev_convert): Same.
	(instantiate_scev_not): Same.
	(instantiate_scev_r): Same.
	(instantiate_scev): Same.
	(resolve_mixers): Same.
	(initialize_scalar_evolutions_analyzer): Same.
	(scev_reset_htab): Same.
	(scev_reset): Same.
	(derive_simple_iv_with_niters): Same.
	(simple_iv_with_niters): Same.
	(expression_expensive_p): Same.
	(final_value_replacement_loop): Same.
	* tree-scalar-evolution.h (block_before_loop): Same.
	* tree-ssa-address.h: Same.
	* tree-ssa-dce.c (find_obviously_necessary_stmts): Same.
	* tree-ssa-dom.c (edge_info::record_simple_equiv): Same.
	(record_edge_info): Same.
	* tree-ssa-live.c (var_map_base_fini): Same.
	(remove_unused_locals): Same.
	* tree-ssa-live.h: Same.
	* tree-ssa-loop-ch.c (should_duplicate_loop_header_p): Same.
	(pass_ch_vect::execute): Same.
	(pass_ch::process_loop_p): Same.
	* tree-ssa-loop-im.c (mem_ref_hasher::hash): Same.
	(movement_possibility): Same.
	(outermost_invariant_loop): Same.
	(stmt_cost): Same.
	(determine_max_movement): Same.
	(invariantness_dom_walker::before_dom_children): Same.
	(move_computations): Same.
	(may_move_till): Same.
	(force_move_till_op): Same.
	(force_move_till): Same.
	(memref_free): Same.
	(record_mem_ref_loc): Same.
	(set_ref_stored_in_loop): Same.
	(mark_ref_stored): Same.
	(sort_bbs_in_loop_postorder_cmp): Same.
	(sort_locs_in_loop_postorder_cmp): Same.
	(analyze_memory_references): Same.
	(mem_refs_may_alias_p): Same.
	(find_ref_loc_in_loop_cmp): Same.
	(rewrite_mem_ref_loc::operator): Same.
	(first_mem_ref_loc_1::operator): Same.
	(sm_set_flag_if_changed::operator): Same.
	(execute_sm_if_changed_flag_set): Same.
	(execute_sm): Same.
	(hoist_memory_references): Same.
	(ref_always_accessed::operator): Same.
	(refs_independent_p): Same.
	(record_dep_loop): Same.
	(ref_indep_loop_p_1): Same.
	(ref_indep_loop_p): Same.
	(can_sm_ref_p): Same.
	(find_refs_for_sm): Same.
	(loop_suitable_for_sm): Same.
	(store_motion_loop): Same.
	(store_motion): Same.
	(fill_always_executed_in): Same.
	* tree-ssa-loop-ivcanon.c (constant_after_peeling): Same.
	(estimated_unrolled_size): Same.
	(loop_edge_to_cancel): Same.
	(remove_exits_and_undefined_stmts): Same.
	(remove_redundant_iv_tests): Same.
	(unloop_loops): Same.
	(estimated_peeled_sequence_size): Same.
	(try_peel_loop): Same.
	(canonicalize_loop_induction_variables): Same.
	(canonicalize_induction_variables): Same.
	* tree-ssa-loop-ivopts.c (iv_inv_expr_hasher::equal): Same.
	(name_info): Same.
	(stmt_after_inc_pos): Same.
	(contains_abnormal_ssa_name_p): Same.
	(niter_for_exit): Same.
	(find_bivs): Same.
	(mark_bivs): Same.
	(find_givs_in_bb): Same.
	(find_induction_variables): Same.
	(find_interesting_uses_cond): Same.
	(outermost_invariant_loop_for_expr): Same.
	(idx_find_step): Same.
	(add_candidate_1): Same.
	(add_iv_candidate_derived_from_uses): Same.
	(alloc_use_cost_map): Same.
	(prepare_decl_rtl): Same.
	(generic_predict_doloop_p): Same.
	(computation_cost): Same.
	(determine_common_wider_type): Same.
	(get_computation_aff_1): Same.
	(get_use_type): Same.
	(determine_group_iv_cost_address): Same.
	(iv_period): Same.
	(difference_cannot_overflow_p): Same.
	(may_eliminate_iv): Same.
	(determine_set_costs): Same.
	(cheaper_cost_pair): Same.
	(compare_cost_pair): Same.
	(iv_ca_cand_for_group): Same.
	(iv_ca_recount_cost): Same.
	(iv_ca_set_remove_invs): Same.
	(iv_ca_set_no_cp): Same.
	(iv_ca_set_add_invs): Same.
	(iv_ca_set_cp): Same.
	(iv_ca_add_group): Same.
	(iv_ca_cost): Same.
	(iv_ca_compare_deps): Same.
	(iv_ca_delta_reverse): Same.
	(iv_ca_delta_commit): Same.
	(iv_ca_cand_used_p): Same.
	(iv_ca_delta_free): Same.
	(iv_ca_new): Same.
	(iv_ca_free): Same.
	(iv_ca_dump): Same.
	(iv_ca_extend): Same.
	(iv_ca_narrow): Same.
	(iv_ca_prune): Same.
	(cheaper_cost_with_cand): Same.
	(iv_ca_replace): Same.
	(try_add_cand_for): Same.
	(get_initial_solution): Same.
	(try_improve_iv_set): Same.
	(find_optimal_iv_set_1): Same.
	(create_new_iv): Same.
	(rewrite_use_compare): Same.
	(remove_unused_ivs): Same.
	(determine_scaling_factor): Same.
	* tree-ssa-loop-ivopts.h: Same.
	* tree-ssa-loop-manip.c (create_iv): Same.
	(compute_live_loop_exits): Same.
	(add_exit_phi): Same.
	(add_exit_phis): Same.
	(find_uses_to_rename_use): Same.
	(find_uses_to_rename_def): Same.
	(find_uses_to_rename_in_loop): Same.
	(rewrite_into_loop_closed_ssa): Same.
	(check_loop_closed_ssa_bb): Same.
	(split_loop_exit_edge): Same.
	(ip_end_pos): Same.
	(ip_normal_pos): Same.
	(copy_phi_node_args): Same.
	(gimple_duplicate_loop_to_header_edge): Same.
	(can_unroll_loop_p): Same.
	(determine_exit_conditions): Same.
	(scale_dominated_blocks_in_loop): Same.
	(niter_for_unrolled_loop): Same.
	(tree_transform_and_unroll_loop): Same.
	(rewrite_all_phi_nodes_with_iv): Same.
	* tree-ssa-loop-manip.h: Same.
	* tree-ssa-loop-niter.c (number_of_iterations_ne_max): Same.
	(number_of_iterations_ne): Same.
	(assert_no_overflow_lt): Same.
	(assert_loop_rolls_lt): Same.
	(number_of_iterations_lt): Same.
	(adjust_cond_for_loop_until_wrap): Same.
	(tree_simplify_using_condition): Same.
	(simplify_using_initial_conditions): Same.
	(simplify_using_outer_evolutions): Same.
	(loop_only_exit_p): Same.
	(ssa_defined_by_minus_one_stmt_p): Same.
	(number_of_iterations_popcount): Same.
	(number_of_iterations_exit): Same.
	(find_loop_niter): Same.
	(finite_loop_p): Same.
	(chain_of_csts_start): Same.
	(get_val_for): Same.
	(loop_niter_by_eval): Same.
	(derive_constant_upper_bound_ops): Same.
	(do_warn_aggressive_loop_optimizations): Same.
	(record_estimate): Same.
	(get_cst_init_from_scev): Same.
	(record_nonwrapping_iv): Same.
	(idx_infer_loop_bounds): Same.
	(infer_loop_bounds_from_ref): Same.
	(infer_loop_bounds_from_array): Same.
	(infer_loop_bounds_from_pointer_arith): Same.
	(infer_loop_bounds_from_signedness): Same.
	(bound_index): Same.
	(discover_iteration_bound_by_body_walk): Same.
	(maybe_lower_iteration_bound): Same.
	(estimate_numbers_of_iterations): Same.
	(estimated_loop_iterations): Same.
	(estimated_loop_iterations_int): Same.
	(max_loop_iterations): Same.
	(max_loop_iterations_int): Same.
	(likely_max_loop_iterations): Same.
	(likely_max_loop_iterations_int): Same.
	(estimated_stmt_executions_int): Same.
	(max_stmt_executions): Same.
	(likely_max_stmt_executions): Same.
	(estimated_stmt_executions): Same.
	(stmt_dominates_stmt_p): Same.
	(nowrap_type_p): Same.
	(loop_exits_before_overflow): Same.
	(scev_var_range_cant_overflow): Same.
	(scev_probably_wraps_p): Same.
	(free_numbers_of_iterations_estimates): Same.
	* tree-ssa-loop-niter.h: Same.
	* tree-ssa-loop-prefetch.c (release_mem_refs): Same.
	(idx_analyze_ref): Same.
	(analyze_ref): Same.
	(gather_memory_references_ref): Same.
	(mark_nontemporal_store): Same.
	(emit_mfence_after_loop): Same.
	(may_use_storent_in_loop_p): Same.
	(mark_nontemporal_stores): Same.
	(should_unroll_loop_p): Same.
	(volume_of_dist_vector): Same.
	(add_subscript_strides): Same.
	(self_reuse_distance): Same.
	(insn_to_prefetch_ratio_too_small_p): Same.
	* tree-ssa-loop-split.c (split_at_bb_p): Same.
	(patch_loop_exit): Same.
	(find_or_create_guard_phi): Same.
	(easy_exit_values): Same.
	(connect_loop_phis): Same.
	(connect_loops): Same.
	(compute_new_first_bound): Same.
	(split_loop): Same.
	(tree_ssa_split_loops): Same.
	* tree-ssa-loop-unswitch.c (tree_ssa_unswitch_loops): Same.
	(is_maybe_undefined): Same.
	(tree_may_unswitch_on): Same.
	(simplify_using_entry_checks): Same.
	(tree_unswitch_single_loop): Same.
	(tree_unswitch_loop): Same.
	(tree_unswitch_outer_loop): Same.
	(empty_bb_without_guard_p): Same.
	(used_outside_loop_p): Same.
	(get_vop_from_header): Same.
	(hoist_guard): Same.
	* tree-ssa-loop.c (gate_oacc_kernels): Same.
	(get_lsm_tmp_name): Same.
	* tree-ssa-loop.h: Same.
	* tree-ssa-reassoc.c (add_repeat_to_ops_vec): Same.
	(build_and_add_sum): Same.
	(no_side_effect_bb): Same.
	(get_ops): Same.
	(linearize_expr): Same.
	(should_break_up_subtract): Same.
	(linearize_expr_tree): Same.
	* tree-ssa-scopedtables.c: Same.
	* tree-ssa-scopedtables.h: Same.
	* tree-ssa-structalias.c (condense_visit): Same.
	(label_visit): Same.
	(dump_pred_graph): Same.
	(perform_var_substitution): Same.
	(move_complex_constraints): Same.
	(remove_preds_and_fake_succs): Same.
	* tree-ssa-threadupdate.c (dbds_continue_enumeration_p): Same.
	(determine_bb_domination_status): Same.
	(duplicate_thread_path): Same.
	(thread_through_all_blocks): Same.
	* tree-ssa-threadupdate.h: Same.
	* tree-streamer-in.c (streamer_read_string_cst): Same.
	(input_identifier): Same.
	(unpack_ts_type_common_value_fields): Same.
	(unpack_ts_block_value_fields): Same.
	(unpack_ts_translation_unit_decl_value_fields): Same.
	(unpack_ts_omp_clause_value_fields): Same.
	(streamer_read_tree_bitfields): Same.
	(streamer_alloc_tree): Same.
	(lto_input_ts_common_tree_pointers): Same.
	(lto_input_ts_vector_tree_pointers): Same.
	(lto_input_ts_poly_tree_pointers): Same.
	(lto_input_ts_complex_tree_pointers): Same.
	(lto_input_ts_decl_minimal_tree_pointers): Same.
	(lto_input_ts_decl_common_tree_pointers): Same.
	(lto_input_ts_decl_non_common_tree_pointers): Same.
	(lto_input_ts_decl_with_vis_tree_pointers): Same.
	(lto_input_ts_field_decl_tree_pointers): Same.
	(lto_input_ts_function_decl_tree_pointers): Same.
	(lto_input_ts_type_common_tree_pointers): Same.
	(lto_input_ts_type_non_common_tree_pointers): Same.
	(lto_input_ts_list_tree_pointers): Same.
	(lto_input_ts_vec_tree_pointers): Same.
	(lto_input_ts_exp_tree_pointers): Same.
	(lto_input_ts_block_tree_pointers): Same.
	(lto_input_ts_binfo_tree_pointers): Same.
	(lto_input_ts_constructor_tree_pointers): Same.
	(lto_input_ts_omp_clause_tree_pointers): Same.
	(streamer_read_tree_body): Same.
	* tree-streamer.h: Same.
	* tree-switch-conversion.c (bit_test_cluster::is_beneficial): Same.
	* tree-vect-data-refs.c (vect_get_smallest_scalar_type): Same.
	(vect_analyze_possibly_independent_ddr): Same.
	(vect_analyze_data_ref_dependence): Same.
	(vect_compute_data_ref_alignment): Same.
	(vect_enhance_data_refs_alignment): Same.
	(vect_analyze_data_ref_access): Same.
	(vect_check_gather_scatter): Same.
	(vect_find_stmt_data_reference): Same.
	(vect_create_addr_base_for_vector_ref): Same.
	(vect_setup_realignment): Same.
	(vect_supportable_dr_alignment): Same.
	* tree-vect-loop-manip.c (rename_variables_in_bb): Same.
	(adjust_phi_and_debug_stmts): Same.
	(vect_set_loop_mask): Same.
	(add_preheader_seq): Same.
	(vect_maybe_permute_loop_masks): Same.
	(vect_set_loop_masks_directly): Same.
	(vect_set_loop_condition_masked): Same.
	(vect_set_loop_condition_unmasked): Same.
	(slpeel_duplicate_current_defs_from_edges): Same.
	(slpeel_add_loop_guard): Same.
	(slpeel_can_duplicate_loop_p): Same.
	(create_lcssa_for_virtual_phi): Same.
	(iv_phi_p): Same.
	(vect_update_ivs_after_vectorizer): Same.
	(vect_gen_vector_loop_niters_mult_vf): Same.
	(slpeel_update_phi_nodes_for_loops): Same.
	(slpeel_update_phi_nodes_for_guard1): Same.
	(find_guard_arg): Same.
	(slpeel_update_phi_nodes_for_guard2): Same.
	(slpeel_update_phi_nodes_for_lcssa): Same.
	(vect_do_peeling): Same.
	(vect_create_cond_for_alias_checks): Same.
	(vect_loop_versioning): Same.
	* tree-vect-loop.c (vect_determine_vf_for_stmt): Same.
	(vect_inner_phi_in_double_reduction_p): Same.
	(vect_analyze_scalar_cycles_1): Same.
	(vect_fixup_scalar_cycles_with_patterns): Same.
	(vect_get_loop_niters): Same.
	(bb_in_loop_p): Same.
	(vect_get_max_nscalars_per_iter): Same.
	(vect_verify_full_masking): Same.
	(vect_compute_single_scalar_iteration_cost): Same.
	(vect_analyze_loop_form_1): Same.
	(vect_analyze_loop_form): Same.
	(vect_active_double_reduction_p): Same.
	(vect_analyze_loop_operations): Same.
	(neutral_op_for_slp_reduction): Same.
	(vect_is_simple_reduction): Same.
	(vect_model_reduction_cost): Same.
	(get_initial_def_for_reduction): Same.
	(get_initial_defs_for_reduction): Same.
	(vect_create_epilog_for_reduction): Same.
	(vectorize_fold_left_reduction): Same.
	(vectorizable_reduction): Same.
	(vectorizable_induction): Same.
	(vectorizable_live_operation): Same.
	(loop_niters_no_overflow): Same.
	(vect_get_loop_mask): Same.
	(vect_transform_loop_stmt): Same.
	(vect_transform_loop): Same.
	* tree-vect-patterns.c (vect_reassociating_reduction_p): Same.
	(vect_determine_precisions): Same.
	(vect_pattern_recog_1): Same.
	* tree-vect-slp.c (vect_analyze_slp_instance): Same.
	* tree-vect-stmts.c (stmt_vectype): Same.
	(process_use): Same.
	(vect_init_vector_1): Same.
	(vect_truncate_gather_scatter_offset): Same.
	(get_group_load_store_type): Same.
	(vect_build_gather_load_calls): Same.
	(vect_get_strided_load_store_ops): Same.
	(vectorizable_simd_clone_call): Same.
	(vectorizable_store): Same.
	(permute_vec_elements): Same.
	(vectorizable_load): Same.
	(vect_transform_stmt): Same.
	(supportable_widening_operation): Same.
	* tree-vectorizer.c (vec_info::replace_stmt): Same.
	(vec_info::free_stmt_vec_info): Same.
	(vect_free_loop_info_assumptions): Same.
	(vect_loop_vectorized_call): Same.
	(set_uid_loop_bbs): Same.
	(vectorize_loops): Same.
	* tree-vectorizer.h (STMT_VINFO_BB_VINFO): Same.
	* tree.c (add_tree_to_fld_list): Same.
	(fld_type_variant_equal_p): Same.
	(fld_decl_context): Same.
	(fld_incomplete_type_of): Same.
	(free_lang_data_in_binfo): Same.
	(need_assembler_name_p): Same.
	(find_decls_types_r): Same.
	(get_eh_types_for_runtime): Same.
	(find_decls_types_in_eh_region): Same.
	(find_decls_types_in_node): Same.
	(assign_assembler_name_if_needed): Same.
	* value-prof.c (stream_out_histogram_value): Same.
	* value-prof.h: Same.
	* var-tracking.c (use_narrower_mode): Same.
	(prepare_call_arguments): Same.
	(vt_expand_loc_callback): Same.
	(resolve_expansions_pending_recursion): Same.
	(vt_expand_loc): Same.
	* varasm.c (const_hash_1): Same.
	(compare_constant): Same.
	(tree_output_constant_def): Same.
	(simplify_subtraction): Same.
	(get_pool_constant): Same.
	(output_constant_pool_2): Same.
	(output_constant_pool_1): Same.
	(mark_constants_in_pattern): Same.
	(mark_constant_pool): Same.
	(get_section_anchor): Same.
	* vr-values.c (compare_range_with_value): Same.
	(vr_values::extract_range_from_phi_node): Same.
	* vr-values.h: Same.
	* web.c (unionfind_union): Same.
	* wide-int.h: Same.

2019-07-09  Martin Sebor  <msebor@redhat.com>

	PR c++/61339
	* align.h: Change class-key from class to struct and vice versa
	to match convention and avoid -Wclass-is-pod and -Wstruct-no-pod.
	* alloc-pool.h: Same.
	* asan.c (shadow_mem_size): Same.
	* auto-profile.c: Same.
	* basic-block.h: Same.
	* bitmap.h: Same.
	* cfgexpand.c (set_rtl): Same.
	(expand_one_stack_var_at): Same.
	* cfghooks.h: Same.
	* cfgloop.h: Same.
	* cgraph.h: Same.
	* config/i386/i386.h: Same.
	* df-problems.c (df_print_bb_index): Same.
	* df-scan.c: Same.
	* df.h (df_single_use): Same.
	* diagnostic-show-locus.c (layout::print_annotation_line): Same.
	(layout::annotation_line_showed_range_p): Same.
	(get_printed_columns): Same.
	(correction::ensure_terminated): Same.
	(line_corrections::~line_corrections): Same.
	* dojump.h: Same.
	* dse.c: Same.
	* dump-context.h: Same.
	* dumpfile.h: Same.
	* dwarf2out.c: Same.
	* edit-context.c: Same.
	* fibonacci_heap.c (test_union_of_equal_heaps): Same.
	* flags.h: Same.
	* function.c (assign_stack_local): Same.
	* function.h: Same.
	* gcc.c: Same.
	* gcov.c (block_info::block_info): Same.
	* genattrtab.c: Same.
	* genextract.c: Same.
	* genmatch.c (comparison_code_p): Same.
	(id_base::id_base): Same.
	(decision_tree::print): Same.
	* genoutput.c: Same.
	* genpreds.c (write_one_predicate_function): Same.
	* genrecog.c (validate_pattern): Same.
	(find_operand_positions): Same.
	(optimize_subroutine_group): Same.
	(merge_pattern_transition::merge_pattern_transition): Same.
	(merge_pattern_info::merge_pattern_info): Same.
	(merge_state_result::merge_state_result): Same.
	(merge_into_state): Same.
	* gensupport.c: Same.
	* gensupport.h: Same.
	* ggc-common.c (init_ggc_heuristics): Same.
	* ggc-tests.c (test_union): Same.
	* gimple-loop-interchange.cc (dump_induction): Same.
	* gimple-loop-versioning.cc: Same.
	* gimple-match.h (gimple_match_cond::any_else): Same.
	* gimple-ssa-backprop.c: Same.
	* gimple-ssa-sprintf.c: Same.
	* gimple-ssa-store-merging.c (store_operand_info::store_operand_info):
	Same.
	(store_immediate_info::store_immediate_info): Same.
	(merged_store_group::apply_stores): Same.
	(get_location_for_stmts): Same.
	* gimple-ssa-strength-reduction.c: Same.
	* gimple-ssa-warn-alloca.c: Same.
	* gimple-ssa-warn-restrict.c (pass_wrestrict::execute): Same.
	* godump.c (go_type_decl): Same.
	* hash-map-tests.c (test_map_of_strings_to_int): Same.
	* hash-map.h: Same.
	* hash-set-tests.c (test_set_of_strings): Same.
	* hsa-brig.c: Same.
	* hsa-common.h: Same.
	* hsa-gen.c (transformable_switch_to_sbr_p): Same.
	* input.c (assert_loceq): Same.
	* input.h: Same.
	* ipa-cp.c: Same.
	* ipa-devirt.c (possible_polymorphic_call_targets_1): Same.
	* ipa-fnsummary.h: Same.
	* ipa-inline.h: Same.
	* ipa-prop.h: Same.
	* ipa-split.c (visit_bb): Same.
	* ira-int.h (minmax_set_iter_next): Same.
	* loop-invariant.c: Same.
	* loop-iv.c: Same.
	* lra-eliminations.c: Same.
	* lra-int.h: Same.
	* lra-lives.c (mark_regno_dead): Same.
	* lra-remat.c: Same.
	* lra-spills.c: Same.
	* lto-streamer.h: Same.
	* mem-stats.h: Same.
	* omp-grid.c (omp_grid_lastprivate_predicate): Same.
	* omp-low.c (omp_clause_aligned_alignment): Same.
	* optabs-query.h (get_vcond_eq_icode): Same.
	* optabs.h: Same.
	* opts.c (wrap_help): Same.
	* poly-int.h: Same.
	* predict.c (predict_paths_leading_to_edge): Same.
	* pretty-print.h: Same.
	* profile-count.h: Same.
	* read-md.h: Same.
	* read-rtl-function.c: Same.
	* ree.c: Same.
	* reginfo.c: Same.
	* regrename.c: Same.
	* regrename.h: Same.
	* reload.h: Same.
	* rtl-iter.h: Same.
	* rtl.h (costs_add_n_insns): Same.
	* sanopt.c: Same.
	* sched-int.h: Same.
	* sel-sched-ir.h: Same.
	* selftest.h: Same.
	* sese.h (vec_find): Same.
	* stmt.c: Same.
	* target-globals.h: Same.
	* tree-affine.c (aff_combination_find_elt): Same.
	* tree-affine.h: Same.
	* tree-data-ref.h: Same.
	* tree-outof-ssa.c (ssa_is_replaceable_p): Same.
	* tree-predcom.c: Same.
	* tree-scalar-evolution.c (find_var_scev_info): Same.
	* tree-ssa-alias.h: Same.
	* tree-ssa-ccp.c: Same.
	* tree-ssa-coalesce.c (ssa_conflicts_dump): Same.
	* tree-ssa-loop-im.c (for_all_locs_in_loop): Same.
	(rewrite_mem_refs): Same.
	(execute_sm_if_changed): Same.
	(hoist_memory_references): Same.
	* tree-ssa-loop-ivopts.c (operator<=): Same.
	* tree-ssa-loop.h: Same.
	* tree-ssa-pre.c (get_or_alloc_expr_for_name): Same.
	* tree-ssa-structalias.c: Same.
	* tree-switch-conversion.h (cluster::cluster): Same.
	(simple_cluster::simple_cluster): Same.
	* tree-vect-patterns.c (type_conversion_p): Same.
	* tree-vectorizer.c (dump_stmt_cost): Same.
	* tree-vectorizer.h (loop_vec_info_for_loop): Same.
	* tree.c (protected_set_expr_location): Same.
	* tree.h (desired_pro_or_demotion_p): Same.
	(fndecl_built_in_p): Same.
	* unique-ptr-tests.cc: Same.
	* var-tracking.c (delete_variable_part): Same.
	* varasm.c (assemble_real): Same.
	(tree_output_constant_def): Same.
	* vec.c: Same.
	* wide-int-bitmask.h: Same.
	* wide-int.h (decompose): Same.

2019-07-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91114
	* tree-vect-data-refs.c (vect_analyze_data_refs): Failure to
	find a vector type isn't fatal.

2019-07-09  Sylvia Taylor  <sylvia.taylor@arm.com>

	* config/aarch64/aarch64-simd.md
	(aarch64_crypto_aes<aes_op>v16qi): Redefine pattern with xor.
	(aarch64_crypto_aes<aesmc_op>v16qi): Remove attribute enabled.
	(*aarch64_crypto_aes<aes_op>v16qi_xor_combine): Remove both.
	(*aarch64_crypto_aese_fused,
	*aarch64_crypto_aesd_fused): Update to new definition.
	* config/aarch64/aarch64.c
	(aarch_macro_fusion_pair_p): Remove aese/aesmc fusion check.

2019-07-09  Richard Biener  <rguenther@suse.de>

	* gimple-match.h (gimple_match_op::resimplify): New.
	(gimple_resimplify1, gimple_resimplify2, gimple_resimplify3,
	gimple_resimplify4, gimple_resimplify5): Remove.
	* gimple-match-head.c (gimple_resimplify1, gimple_resimplify2,
	gimple_resimplify3, gimple_resimplify4, gimple_resimplify5):
	Make static.
	(gimple_match_op::resimplify): New.
	* tree-ssa-sccvn.c (vn_nary_build_or_lookup_1): Valueize
	according to availability.  Use gimple_match_op::resimplify.

2019-07-09  Eric Botcazou  <ebotcazou@adacore.com>

	* ira-emit.c (emit_moves): Skip DEBUG_INSNs when setting the location.

2019-07-09  Sylvia Taylor  <sylvia.taylor@arm.com>

	* config/arm/crypto.md:
	(crypto_<crypto_pattern>): Redefine aese/aesd pattern with xor.
	(crypto_<crypto_pattern>): Remove attribute enabled for aesmc.
	(crypto_<crypto_pattern>): Split CRYPTO_BINARY into 2 patterns.
	(*aarch32_crypto_aese_fused, *aarch32_crypto_aesd_fused): New.
	* config/arm/arm.c
	(aarch_macro_fusion_pair_p): Remove aes/aesmc fusion check.
	* config/arm/aarch-common-protos.h
	(aarch_crypto_can_dual_issue): Remove.
	* config/arm/aarch-common.c
	(aarch_crypto_can_dual_issue): Likewise.
	* config/arm/exynos-m1.md: Remove aese/aesmc fusion.
	* config/arm/cortex-a53.md: Likewise.
	* config/arm/cortex-a57.md: Likewise.
	* config/arm/iterators.md:
	(CRYPTO_BINARY): Redefine.
	(CRYPTO_UNARY): Removed.
	(CRYPTO_AES, CRYPTO_AESMC): New.

2019-07-09  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (struct vn_walk_cb_data): Add orig_ref member.
	(vn_reference_lookup_3): If the main ref has no access path recorded
	but orig_ref has use it to do access-path based disambiguation.
	(vn_reference_lookup_pieces): Adjust.
	(vn_reference_lookup): Pass down original ref if we valueized.

2019-07-09  Martin Liska  <mliska@suse.cz>

	* doc/extend.texi: Document influence on loop
	optimizers.

2019-07-09  Martin Liska  <mliska@suse.cz>

	* lto-compress.c (lto_normalized_zstd_level): Do not use
	ZSTD_CLEVEL_DEFAULT as it is not default in old releases
	of libzstd.  One can use 0 as a default compression level.

2019-07-09  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Add link from -fprofile-dir option.
	Use better wording for 'gcno filename'.

2019-07-08  Martin Sebor  <msebor@redhat.com>

	PR middle-end/71924
	PR middle-end/90549
	* gimple-ssa-isolate-paths.c (isolate_path): Add attribute.  Update
	comment.
	(args_loc_t): New type.
	(args_loc_t, locmap_t): same.
	(diag_returned_locals): New function.
	(is_addr_local): Same.
	(handle_return_addr_local_phi_arg, warn_return_addr_local): Same.
	(find_implicit_erroneous_behavior): Call warn_return_addr_local_phi_arg.
	(find_explicit_erroneous_behavior): Call warn_return_addr_local.

2019-07-08  Jakub Jelinek  <jakub@redhat.com>

	* tree-vect-stmts.c (scan_operand_equal_p): Look through MEM_REF
	with SSA_NAME address of POINTER_PLUS_EXPR.  Handle MULT_EXPR
	and casts in offset when different, both through gimple stmts
	and through trees.  Rewritten using loops to minimize code duplication
	for each operand.

2019-07-08  Eric Botcazou  <ebotcazou@adacore.com>

	* emit-rtl.c (set_insn_locations): New function moved from...
	* function.c (set_insn_locations): ...here.
	* ira-emit.c (emit_moves): Propagate location of the first instruction
	to the inserted move instructions.
	* reg-stack.c (compensate_edge): Set the location if the sequence is
	inserted on the edge.
	* rtl.h (set_insn_locations): Declare.

2019-07-08  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_machine_from_flags): Ignore
	OPTION_MASK_PPC_GFXOPT and OPTION_MASK_PPC_GPOPT for selecting the
	.machine string.

2019-07-08  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/88233
	* common.opt (fsplit-wide-types-early): New option.
	* common/config/rs6000/rs6000-common.c
	(rs6000_option_optimization_table): Add OPT_fsplit_wide_types_early for
	OPT_LEVELS_ALL.
	* doc/invoke.texi (Optimization Options): Add -fsplit-wide-types-early.
	* lower-subreg.c (pass_lower_subreg2::gate): Add test for
	flag_split_wide_types_early.
	(pass_data_lower_subreg3): New.
	(pass_lower_subreg3): New.
	(make_pass_lower_subreg3): New.
	* passes.def (pass_lower_subreg2): Move after the loop passes.
	(pass_lower_subreg3): New, inserted where pass_lower_subreg2 was.
	* tree-pass.h (make_pass_lower_subreg2): Move up, to its new place in
	the pass pipeline; its previous place is taken by ...
	(make_pass_lower_subreg3): ... this.

2019-07-08  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/s390.c (s390_shift_truncation_mask): Define.
	(TARGET_SHIFT_TRUNCATION_MASK): Define.

2019-07-08  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/constraints.md: Add new jsc constraint.
	* config/s390/predicates.md: New predicates.
	* config/s390/s390-protos.h (s390_valid_shift_count): New function.
	* config/s390/s390.c (s390_valid_shift_count): New function.
	(print_shift_count_operand): Use s390_valid_shift_count.
	(print_operand): Likewise.
	* config/s390/s390.md: Use new predicate.
	* config/s390/subst.md: Remove addr_style_op and masked_op substs.
	* config/s390/vector.md: Use new predicate.

2019-07-08  Andrew Waterman  <andrew@sifive.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv.md (lshrsi3_zero_extend_3+1): Use operands[1]
	bitsize	instead of BITS_PER_WORD.

2019-07-08  Martin Liska  <mliska@suse.cz>

	* collect2.c (defined): Revert to before r254460.
	(scan_prog_file): Revert to before r254460.

2019-07-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/83518
	* tree-ssa-sccvn.c: Include splay-tree.h.
	(struct pd_range, struct pd_data): New.
	(struct vn_walk_cb_data): Add data to track partial definitions.
	(vn_walk_cb_data::~vn_walk_cb_data): New.
	(vn_walk_cb_data::push_partial_def): New.
	(pd_tree_alloc, pd_tree_dealloc, pd_range_compare): New.
	(vn_reference_lookup_2): When partial defs are registered give up.
	(vn_reference_lookup_3): Track partial defs for memset and
	constructor zeroing and for defs from constants.

2019-07-08  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/install.texi (bootstrap-Og): Document.

2019-07-08  Richard Sandiford  <richard.sandiford@arm.com>

	* config/riscv/pic.md (*local_pic_load_s<mode>)
	(*local_pic_load_u<mode>): Explicitly specify the mode iterator
	referenced by <mode>, giving...
	(*local_pic_load_s<SUBX:mode>, *local_pic_load_u<SUBX:mode>): ...these.
	* config/riscv/riscv.md (*sge<u>_<X:mode><GPR:mode>)
	(*slt<u>_<X:mode><GPR:mode>, *sle<u>_<X:mode><GPR:mode>): Explicitly
	use <X:MODE> for the mode attribute.

2019-07-07  Jeff Law  <law@redhat.com>

	PR tree-optimization/91090
	* tree-ssa-dom.c (simplify_stmt_for_jump_threading): Fix logic error
	in handling of ranges to simplify switch statements.

2019-07-07  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_override_options): Make a final check on PIC
	options.

2019-07-07  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_override_options): Don't jam symbol stubs
	on for kernel code.

2019-07-07  Richard Sandiford  <richard.sandiford@arm.com>

	PR target/91068
	* config/mips/mips.md (*mul_acc_si, *mul_acc_si_r3900, *macc)
	(*msac, *msac_using_macc, *mul_sub_si): Use "l" for input operands
	instead of matching them to "l" output operands.

2019-07-07  Richard Sandiford  <richard.sandiford@arm.com>

	* config/mips/mips.c (mips_split_move): Zero-initialize addr
	and check whether addr.reg is nonnull before using it.

2019-07-06  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (lower_rec_input_clauses): For lastprivate clauses in
	ctx->for_simd_scan_phase simd copy the outer var to the privatized
	variable(s).  For conditional lastprivate look through outer
	GIMPLE_OMP_SCAN context.
	(lower_omp_1): For conditional lastprivate look through outer
	GIMPLE_OMP_SCAN context.

	* omp-low.c (struct omp_context): Rename combined_into_simd_safelen0
	member to combined_into_simd_safelen1.
	(lower_rec_input_clauses, lower_omp_1): Adjust uses.
	(lower_lastprivate_clauses): Likewise.  For conditional lastprivate
	clauses if ctx->combined_into_simd_safelen1 put statements after the
	predicate conditionalized block rather than into it.

2019-07-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/s390/s390.md (*negabs<FP:mode>2_nocc): Use FP for
	operand 1.
	* config/s390/vx-builtins.md (*vec_cmp<insn_cmp><mode>_cconly):
	Make the choice of <mode> explicit, giving...
	(*vec_cmp<insn_cmp><VF_HW:mode>_cconly): ...this.

2019-07-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/i386/i386.md (*fop_<X87MODEF:mode>_3_i387)
	(l<rounding_insn><MODEF:mode><SWI48:mode>2): Fix ambiguous uses
	of .md attributes.
	* config/i386/sse.md (*avx512pf_gatherpf<mode>sf_mask)
	(*avx512pf_gatherpf<mode>df_mask, *avx512pf_scatterpf<mode>sf_mask)
	(*avx512pf_scatterpf<mode>df_mask, *avx2_gathersi<mode>)
	(*avx2_gathersi<mode>_2, *avx2_gatherdi<mode>)
	(*avx2_gatherdi<mode>_2, *avx2_gatherdi<mode>_3): Likewise.
	(*avx2_gatherdi<mode>_4, *avx512f_gathersi<mode>): Likewise.
	(*avx512f_gathersi<mode>_2, *avx512f_gatherdi<mode>): Likewise.
	(*avx512f_gatherdi<mode>_2, *avx512f_scattersi<mode>): Likewise.
	(*avx512f_scatterdi<mode>): Likewise.
	(*andnot<mode>3_bcst): Fix VI/VI48_AVX512VL typo.

2019-07-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/h8300/h8300.md (*push1_h8300hs_<mode>): Explicitly
	specify the mode iterator referenced by <mode>, giving...
	(*push1_h8300hs_<QHI:mode>): ...this.

2019-07-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/gcn/gcn-valu.md
	(vcond<VEC_1REG_MODE:mode><VEC_1REG_ALT:mode>): Use
	gen_vec_cmp<VEC_1REG_ALT:mode>di rather than (implicitly)
	gen_vec_cmp<VEC_1REG_MODE:mode>di.  Explicitly use
	gen_vcond_mask_<VEC_1REG_MODE:mode>di.
	(vcond<VEC_1REG_MODE:mode><VEC_1REG_ALT:mode>_exec): Likewise,
	but using the _exec comparison patterns.
	(vcondu<VEC_1REG_INT_MODE:mode><VEC_1REG_INT_ALT:mode>): Use
	gen_vec_cmp<VEC_1REG_INT_ALT:mode>di rather than (implicitly)
	gen_vec_cmp<VEC_1REG_INT_MODE:mode>di.  Explicitly use
	gen_vcond_mask_<VEC_1REG_INT_MODE:mode>di.
	(vcondu<VEC_1REG_INT_MODE:mode><VEC_1REG_INT_ALT:mode>_exec): Likewise,
	but using the _exec comparison patterns.

2019-07-06  Richard Sandiford  <richard.sandiford@arm.com>

	* config/arm/sync.md
	(@atomic_compare_and_swap<CCSI:arch><NARROW:mode>_1): Use
	<NARROW:sync_predtab> instead of (implicitly) <CCSI:sync_predtab>.
	(@atomic_compare_and_swap<CCSI:arch><SIDI:mode>_1): Likewise use
	<SIDI:sync_predtab>.  Use <SIDI:cas_cmp_operand> and
	<SIDI:cas_cmp_str>.

2019-07-06  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (struct omp_context): Add for_simd_scan_phase member.
	(maybe_lookup_ctx): Add forward declaration.
	(omp_find_scan): Likewise.  Walk into body of simd if composited
	with worksharing loop.
	(scan_omp_simd_scan): New function.
	(scan_omp_1_stmt): Call it.
	(lower_rec_simd_input_clauses): Don't create rvar nor rvar2 if
	ctx->for_simd_scan_phase.
	(lower_rec_input_clauses): Do much less work for inscan reductions
	in ctx->for_simd_scan_phase is_simd regions.
	(lower_omp_scan): Set is_simd also on simd constructs composited
	with worksharing loop, unless ctx->for_simd_scan_phase.  Never emit
	a sorry message.  Don't change GIMPLE_OMP_SCAN stmts into nops and
	emit their body after in simd constructs composited with worksharing
	loop.
	(lower_omp_for_scan): Handle worksharing loop composited with simd.

	* omp-low.c (omp_find_scan): Make static.
	(lower_omp_for_scan): Fix order of merge arguments in input phase of
	the second loop, var2 represents the first partial sum and so needs
	to go before rprivb[ivar].

2019-07-05  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000-logue.c: Remove unused code.

2019-07-05  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-ssa-loop-manip.c (create_iv): Add missing guard for gsi_end_p.

2019-07-05  Sam Tebbs  <sam.tebbs@arm.com>

	PR target/90712
	* config/aarch64/aarch64.c (aarch64_post_cfi_startproc): Replace thunk
	check with a frame laid out check.

2019-07-05  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_reference_lookup_3): Valueize RHS
	when comparing against a store with possibly the same value.

2019-07-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91091
	* tree-ssa-alias.h (get_continuation_for_phi): Add tbaa_p parameter.
	(walk_non_aliased_vuses): Likewise.
	* tree-ssa-alias.c (maybe_skip_until): Pass down tbaa_p.
	(get_continuation_for_phi): New tbaa_p parameter and pass
	it down.
	(walk_non_aliased_vuses): Likewise.
	* ipa-prop.c (determine_known_aggregate_parts): Adjust.
	* tree-ssa-pre.c (translate_vuse_through_block): Likewise.
	* tree-ssa-scopedtables.c (avail_exprs_stack::lookup_avail_expr):
	Likewise.
	* tree-ssa-sccvn.c (struct vn_walk_cb_data): Add tbaa_p flag.
	(adjust_offsets_for_equal_base_address): New function.
	(vn_reference_lookup_3): Use it to catch more base equivalences.
	Handle and pass down tbaa_p flag.
	(vn_reference_lookup_pieces): Adjust.
	(vn_reference_lookup): Remove alias-set altering, instead pass
	down false as tbaa_p.

2019-07-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/91091
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Overlap of
	accesses can happen with -fno-strict-aliasing.

2019-07-05  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (alias_stats): Add
	nonoverlapping_component_refs_since_match_p_must_overlap.
	(dump_alias_stats): Print it.
	(nonoverlapping_component_refs_since_match_p): Add early exit.
	(nonoverlapping_component_refs_p): Do not account early exit.

2019-07-05  Eric Botcazou  <ebotcazou@adacore.com>

	* except.c (emit_to_new_bb_before): Make sure to put a location on SEQ.
	* tree-eh.c (replace_goto_queue_1) <GIMPLE_GOTO>: Propagate location.
	(emit_eh_dispatch): Delete.
	(lower_catch): Emit the eh_dispatch manually and set the location of
	the first catch statement onto it.
	(lower_eh_filter): Emit the eh_dispatch manually and set location.
	(lower_eh_dispatch): Propagate location.
	* tree-outof-ssa.c (set_location_for_edge): Handle EH edges specially.
	(eliminate_build): Likewise.

2019-07-05  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-cfg.c (gimple_make_forwarder_block): Propagate location info on
	phi nodes if possible.
	* tree-scalar-evolution.c (final_value_replacement_loop): Propagate
	location info on the newly created statement.
	* tree-ssa-loop-manip.c (create_iv): Propagate location info on the
	newly created increment if needed.

2019-07-04  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/78884
	* gimplify.c (struct gimplify_omp_ctx): Add add_safelen1 member.
	(gimplify_bind_expr): If seeing TREE_ADDRESSABLE VLA inside of simd
	loop body, set ctx->add_safelen1 instead of making it GOVD_PRIVATE.
	(gimplify_adjust_omp_clauses): Add safelen (1) clause if
	ctx->add_safelen1 is set.

	* omp-expand.c (expand_omp_for_static_nochunk): Don't emit
	GOMP_loop_start at the start of second worksharing loop in a scan.
	For nowait, don't emit GOMP_loop_end_nowait at the end of first
	worksharing loop in a scan even if there are conditional lastprivates,
	and do emit GOMP_loop_end_nowait at the end of second worksharing loop.

2019-07-04  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (nonoverlapping_component_refs_since_match_p):
	Fix check for match in the ref walk.

2019-07-04  Martin Liska  <mliska@suse.cz>

	* tree-ssa-loop-niter.c
	(get_upper_bound_based_on_builtin_expr_with_prob): New function.
	(estimate_numbers_of_iterations):
	Support __builtin_expect_with_probability for analysis
	of # of loop iterations.

2019-07-04  Alexandre Oliva  <oliva@adacore.com>

	* doc/generic.texi (Cleanups): Document EH_ELSE_EXPR.
	* except.c: Likewise.
	* expr.c (expand_expr_real_1): Reject it.
	* gimplify.c (gimplify_expr): Gimplify it, within
	TRY_FINALLY_EXPR.
	* tree-dump.c (dequeue_and_dump): Dump it.
	* tree-pretty-print.c (dump_generic_node): Likewise.
	* tree.c (block_may_fallthru): Handle it.
	* tree.def (EH_ELSE_EXPR): Introduce it.
	* gimple-pretty-print.c (dump_gimple_try): Dump TRY_FINALLY
	with GIMPLE_EH_ELSE as try/finally/else.

2019-07-04  Richard Biener  <rguenther@suse.de>

	PR ipa/91062
	* tree-pass.h (execute_all_ipa_transforms): Add a flag
	parameter whether to disable GC collection.
	* passes.c (execute_one_ipa_transform_pass): Likewise, and
	honor it.
	(execute_all_ipa_transforms): Likewise and pass it down.
	* cgraph.c (cgraph_node::get_body): Do not invoke garbage
	collection from applying IPA transforms.
	* cgraphunit.c (cgraph_node::expand): Allow garbage collection
	from applying IPA transforms.

2019-07-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90911
	* tree-vectorizer.h (_loop_vec_info::scalar_loop_scaling): New field.
	(LOOP_VINFO_SCALAR_LOOP_SCALING): new.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	scalar_loop_scaling.
	(vect_transform_loop): Scale scalar loop profile if needed.
	* tree-vect-loop-manip.c (vect_loop_versioning): When re-using
	the loop copy from if-conversion adjust edge probabilities
	and scale the vectorized loop body profile, queue the scalar
	profile for updating after peeling.

2019-07-04  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (decl_refs_may_alias_p): Add size1 and size2
	parameters; return early for must-alias.
	(indirect_ref_may_alias_decl_p): Likewise; when establishing
	outer types match, try nonoverlapping_component_refs
	if must-alias is not obvious.
	(indirect_refs_may_alias_p): Likewise.
	(refs_may_alias_p_2): Likewise.

2019-07-04  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.h (vn_reference_lookup): Add last_vuse_ptr
	argument.
	* tree-ssa-sccvn.c (last_vuse_ptr, vn_walk_kind): Move
	globals into...
	(struct vn_walk_cb_data): New callback data struct.
	(vn_reference_lookup_2): Adjust.
	(vn_reference_lookup_3): Likewise.
	(vn_reference_lookup_pieces): Likewise.
	(vn_reference_lookup): Likewise, get last_vuse_ptr argument.
	(visit_reference_op_load): Adjust.

2019-07-04  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91063
	* tree-vect-stmts.c (vect_init_vector): Call gsi_remove to remove
	stmt from stmts sequence before calling vect_init_vector_1.
	Formatting fix.

2019-07-04  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/88833
	* fwprop.c (reg_single_def_p): New function.
	(propagate_rtx_1): Add unconditional else inside RTX_EXTRA case.
	(forward_propagate_into): New parameter reg_prop_only
	with default value false.
	Propagate def's src into loop only if SET_SRC and SET_DEST
	of def_set have single definitions.
	Likewise if reg_prop_only is set to true.
	(fwprop): New param fwprop_addr_p.
	Integrate fwprop_addr into fwprop.
	(fwprop_addr): Remove.
	(pass_rtl_fwprop_addr::execute): Call fwprop with arg set
	to true.
	(pass_rtl_fwprop::execute): Call fwprop with arg set to false.
	* simplify-rtx.c (simplify_subreg): Add case for vector comparison.
	* config/i386/sse.md (UNSPEC_BLENDV): Adjust pattern.

2019-07-04  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (lower_omp_scan): Call lower_omp on stmt's body
	in worksharing loop scans.

	PR tree-optimization/91074
	* omp-low.c (lower_omp_for_scan): Set DECL_GIMPLE_REG_P on cplx
	temporary.

	PR rtl-optimization/90756
	* explow.c (promote_ssa_mode): Always use TYPE_MODE, don't bypass it
	for VECTOR_TYPE_P.

2019-07-03  Dennis Zhang  <dennis.zhang@arm.com>

	* config/aarch64/aarch64.md: Remove redundant constraints from
	define_expand but keep some patterns untouched if they are
	specially selected by TARGET_SECONDARY_RELOAD hook.
	* config/aarch64/aarch64-sve.md: Likewise.
	* config/aarch64/atomics.md: Remove redundant constraints from
	define_expand.
	* config/aarch64/aarch64-simd.md: Likewise.

2019-07-03  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h (DRIVER_SELF_SPECS): Remove the linker cases.
	(RDYNAMIC): Rename to, DARWIN_RDYNAMIC.
	(DARWIN_PIE_SPEC, DARWIN_NOPIE_SPEC): Adjust to remove the Xlinker
	clauses.
	(LINK_COMMAND_SPEC_A): Add DARWIN_RDYNAMIC, DARWIN_PIE_SPEC and
	DARWIN_NOPIE_SPEC.

2019-07-03  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h (REAL_LIBGCC_SPEC): Adjust for earlier Darwin.
	(STARTFILE_SPEC): Split crt3 into a separate spec.
	(DARWIN_EXTRA_SPECS): Add crt2 and crt3 spec.
	(DARWIN_CRT2_SPEC): New.
	(DARWIN_CRT3_SPEC): New.
	(MIN_LD64_OMIT_STUBS): Revise to 62.1.
	* config/rs6000/darwin.h (DARWIN_CRT2_SPEC): Revise conditions.
	(DARWIN_CRT3_SPEC): New.

2019-07-03  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/altivec.md (altivec_mov<mode>, VM2 iterator):
	Change the RTL attribute "length" from "4" to "*" to allow the
	length attribute to be adjusted automatically for prefixed load,
	store, and add immediate instructions.
	* config/rs6000/rs6000.md (extendhi<mode>2, EXTHI iterator):
	Likewise.
	(extendsi<mode>2, EXTSI iterator): Likewise.
	(movsi_internal1): Likewise.
	(movsi_from_sf): Likewise.
	(movdi_from_sf_zero_ext): Likewise.
	(mov<mode>_internal): Likewise.
	(movcc_internal1, QHI iterator): Likewise.
	(mov<mode>_softfloat, FMOVE32 iterator): Likewise.
	(movsf_from_si): Likewise.
	(mov<mode>_hardfloat32, FMOVE64 iterator): Likewise.
	(mov<mode>_softfloat64, FMOVE64 iterator): Likewise.
	(mov<mode>, FMOVE128 iterator): Likewise.
	(movdi_internal64): Likewise.
	* config/rs6000/vsx.md (vsx_le_permute_<mode>, VSX_TI iterator):
	Likewise.
	(vsx_le_undo_permute_<mode>, VSX_TI iterator): Likewise.
	(vsx_mov<mode>_64bit, VSX_M iterator): Likewise.
	(vsx_mov<mode>_32bit, VSX_M iterator): Likewise.
	(vsx_splat_v4sf): Likewise.

2019-07-03  Mark Wielaard  <mark@klomp.org>

	PR debug/90981
	* dwarf2out.c (add_top_level_skeleton_die_attrs): Only add
	DW_AT_addr_base if there is actually a .debug_addr section with
	addresses.
	(output_addr_table): Add DWARF5 table header generation here after
	checking there are actually any addresses from...
	(dwarf2out_finish): ...here.

2019-07-03  Richard Biener  <rguenther@suse.de>

	PR middle-end/91069
	* match.pd (vec_perm -> bit_insert): Fix element read from
	first vector.

2019-07-03  Martin Liska  <mliska@suse.cz>

	* dbgcnt.def (DEBUG_COUNTER): Add match debug counter.
	* genmatch.c (dt_simplify::gen_1): Generate dbgcnt
	condition.
	* generic-match-head.c: Include dbgcnt.h.
	* gimple-match-head.c: Likewise.

2019-07-03  Martin Liska  <mliska@suse.cz>

	* gcov-counter.def (GCOV_COUNTER_V_SINGLE): Remove.
	(GCOV_COUNTER_V_TOPN): New.
	(GCOV_COUNTER_V_INDIR): Use _topn.
	* gcov-io.h (GCOV_DISK_SINGLE_VALUES): Remove.
	(GCOV_TOPN_VALUES): New.
	(GCOV_SINGLE_VALUE_COUNTERS): Remove.
	(GCOV_TOPN_VALUES_COUNTERS): New.
	* profile.c (instrument_values): Use HIST_TYPE_TOPN_VALUES.
	* tree-profile.c:
	(gimple_init_gcov_profiler): Rename variables from one_value
	to topn_values.
	(gimple_gen_one_value_profiler): Remove.
	(gimple_gen_topn_values_profiler): New function.
	* value-prof.c (dump_histogram_value): Use TOPN_VALUES
	names instead of SINGLE_VALUE.
	(stream_out_histogram_value): Likewise.
	(stream_in_histogram_value): Likewise.
	(get_most_common_single_value): Likewise.
	(gimple_divmod_fixed_value_transform): Likewise.
	(gimple_stringops_transform): Likewise.
	(gimple_divmod_values_to_profile): Likewise.
	(gimple_stringops_values_to_profile): Likewise.
	(gimple_find_values_to_profile): Likewise.
	* value-prof.h (enum hist_type): Rename to TOPN.
	(gimple_gen_one_value_profiler): Remove.
	(gimple_gen_topn_values_profiler): New.

2019-07-03  Eric Botcazou  <ebotcazou@adacore.com>

	* dwarf2out.c (add_scalar_info): Add back refererence to existing DIE
	if it has the DW_AT_data_member_location attribute.

2019-07-03  Richard Biener  <rguenther@suse.de>

	* gimple-pretty-print.c (dump_ternary_rhs): Fix BIT_INSERT_EXPR
	dumping.

2019-07-03  Sylvia Taylor  <sylvia.taylor@arm.com>

	* config/aarch64/aarch64.md (FP_REGNUM): New constant.
	(tlsdesc_small_advsimd_<mode>): Add use of FP_REGNUM.
	(tlsdesc_small_sve_<mode>): Likewise.

2019-07-03  Martin Liska  <mliska@suse.cz>

	* Makefile.in: Define ZSTD_LIB.
	* common.opt: Adjust compression level
	to support also zstd levels.
	* config.in: Regenerate.
	* configure: Likewise.
	* configure.ac: Add --with-zstd and --with-zstd-include options
	and detect ZSTD.
	* doc/install.texi: Mention zstd dependency.
	* gcc.c: Print supported LTO compression algorithms.
	* lto-compress.c (lto_normalized_zstd_level): Likewise.
	(lto_compression_zstd): Likewise.
	(lto_uncompression_zstd): Likewise.
	(lto_end_compression): Dispatch in between zlib and zstd.
	(lto_compression_zlib): Mark with ATTRIBUTE_UNUSED.
	(lto_uncompression_zlib): Make it static.
	* lto-compress.h (lto_end_uncompression): Fix GNU coding style.
	* lto-section-in.c (lto_get_section_data): Pass info
	about used compression.
	* lto-streamer-out.c: By default use zstd when possible.
	* timevar.def (TV_IPA_LTO_DECOMPRESS): Rename to decompression
	(TV_IPA_LTO_COMPRESS): Likewise for compression.

2019-07-03  Martin Liska  <mliska@suse.cz>

	* lto-section-in.c (lto_get_section_data): Add "lto" section.
	* lto-section-out.c (lto_destroy_simple_output_block): Never
	compress LTO_section_lto section.
	* lto-streamer-out.c (produce_asm): Do not set major_version
	and minor_version.
	(lto_output_toplevel_asms): Likewise.
	(produce_lto_section): New function.
	(lto_output): Call produce_lto_section.
	(lto_write_mode_table): Do not set major_version and
	minor_version.
	(produce_asm_for_decls): Likewise.
	* lto-streamer.h (enum lto_section_type): Add LTO_section_lto
	type.
	(struct lto_header): Remove.
	(struct lto_section): New struct.
	(struct lto_simple_header): Do not inherit from lto_header.
	(struct lto_file_decl_data): Add lto_section_header field.

2019-07-03  Martin Liska  <mliska@suse.cz>

	* lra-eliminations.c (eliminate_regs_in_insn): Remove
	dead assignemts.
	* reg-stack.c (check_asm_stack_operands): Likewise.
	* tree-ssa-structalias.c (create_function_info_for): Likewise.
	* tree-vect-generic.c (expand_vector_operations_1): Likewise.
	* config/i386/i386-expand.c (ix86_expand_sse2_mulvxdi3): Use
	force_expand_binop.

2019-07-03  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90892
	* builtins.c (inline_expand_builtin_string_cmp): Handle '\0'
	in string constants.

2019-07-03  Martin Liska  <mliska@suse.cz>

	PR middle-end/90899
	* multiple_target.c (create_dispatcher_calls): Add to comdat
	group only if set for ifunc.

2019-07-03  Martin Liska  <mliska@suse.cz>

	PR target/88056
	* config/i386/host-mingw32.c (mingw32_gt_pch_use_address):
	Define local_object_name in outer scope in order to handle
	use-after-scope issue.

2019-07-03  Martin Liska  <mliska@suse.cz>

	* common.opt: Add fprofile-note.
	* coverage.c (coverage_init): Append the option
	to bbg_file_name.
	* doc/invoke.texi: Document -fprofile-note.

2019-07-03  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/91033
	* tree-vectorizer.h (vect_mark_stmts_to_be_vectorized,
	vect_analyze_data_refs): Add bool * arguments.
	* tree-vect-data-refs.c (vect_analyze_data_refs): Add fatal argument,
	if failure is due to scatter/gather, set *fatal to false if non-NULL.
	* tree-vect-stmts.c (vect_mark_stmts_to_be_vectorized): Likewise.
	* tree-vect-loop.c (vect_analyze_loop_2): Adjust
	vect_mark_stmts_to_be_vectorized and vect_analyze_data_refs callers.
	* tree-vect-slp.c (vect_slp_analyze_bb_1): Adjust
	vect_analyze_data_refs caller.

	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE__SCANTEMP_
	clause.
	* tree.h (OMP_CLAUSE_DECL): Use OMP_CLAUSE__SCANTEMP_ instead of
	OMP_CLAUSE__CONDTEMP_ as range's upper bound.
	(OMP_CLAUSE__SCANTEMP__ALLOC, OMP_CLAUSE__SCANTEMP__CONTROL): Define.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add
	OMP_CLAUSE__SCANTEMP_ entry.
	(walk_tree_1): Handle OMP_CLAUSE__SCANTEMP_.
	* tree-pretty-print.c (dump_omp_clause): Likewise.
	* tree-nested.c (convert_nonlocal_omp_clauses,
	convert_local_omp_clauses): Likewise.
	* omp-general.h (struct omp_for_data): Add have_scantemp and
	have_nonctrl_scantemp members.
	* omp-general.c (omp_extract_for_data): Initialize them.
	* omp-low.c (struct omp_context): Add scan_exclusive member.
	(scan_omp_1_stmt): Don't unnecessarily mask gimple_omp_for_kind
	result again with GF_OMP_FOR_KIND_MASK.  Initialize also
	ctx->scan_exclusive.
	(lower_rec_simd_input_clauses): Use ctx->scan_exclusive instead
	of !ctx->scan_inclusive.
	(lower_rec_input_clauses): Simplify gimplification of dtors using
	gimplify_and_add.  For non-is_simd test OMP_CLAUSE_REDUCTION_INSCAN
	rather than rvarp.  Handle OMP_CLAUSE_REDUCTION_INSCAN in worksharing
	loops.  Don't add barrier for reduction_omp_orig_ref if
	ctx->scan_??xclusive.
	(lower_reduction_clauses): Don't do anything for ctx->scan_??xclusive.
	(lower_omp_scan): Use ctx->scan_exclusive instead
	of !ctx->scan_inclusive.  Handle worksharing loops with inscan
	reductions.  Use new_vard != new_var instead of repeated
	omp_is_reference calls.
	(omp_find_scan, lower_omp_for_scan): New functions.
	(lower_omp_for): Call lower_omp_for_scan for worksharing loops with
	inscan reductions.
	* omp-expand.c (expand_omp_scantemp_alloc): New function.
	(expand_omp_for_static_nochunk): Handle fd->have_nonctrl_scantemp
	and fd->have_scantemp.

	* gimplify.c (gimplify_scan_omp_clauses): For inscan reductions
	on worksharing loop propagate it as shared clause to containing
	combined parallel.

	* omp-expand.c (expand_omp_for_static_nochunk,
	expand_omp_for_static_chunk): For nowait worksharing loop with
	conditional lastprivate clause(s), emit GOMP_loop_end_nowait call
	at the end.

2019-07-02  qing zhao  <qing.zhao@oracle.com>

	PR preprocessor/90581
	* doc/cppopts.texi: Add document for -fmax-include-depth.
	* doc/invoke.texi (Preprocessor Options): List -fmax-include-depth.

2019-07-02  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/mmx.md (mmx_pack<s_trunsuffix>swb):
	Use TARGET_SSE2 && SSE_REGNO_P in split condition.
	(mmx_packssdw): Ditto.
	(mmx_punpckhbw): Ditto.
	(mmx_punpcklbw): Ditto.
	(mmx_punpckhwd): Ditto.
	(mmx_punpcklwd): Ditto.
	(mmx_punpckhdq): Ditto.
	(mmx_punpckldq): Ditto.
	(*vec_dupv4hi): Ditto.
	(*vec_dupv2si): Ditto.
	(mmx_pmovmskb): Ditto.
	* config/i386/sse.md (sse_cvtpi2ps): Use
	TARGET_SSE2 && SSE_REG_P in split condition.
	(ssse3_ph<plusminus_mnemonic>wv4hi3): Use
	TARGET_SSSE3 && SSE_REGNO_P in split condition.
	(ssse3_ph<plusminus_mnemonic>dv2si3): Ditto.
	(ssse3_pshufbv8qi3): Ditto.
	(ssse3_palignrdi): Ditto.

2019-07-02  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.md (movdi_symbol_save_scc): Convert to define_insn
	with inlined save and restore.

2019-07-02  Eric Botcazou  <ebotcazou@adacore.com>

	* cfgexpand.c (pass_expand::execute): Deal specially with instructions
	to be inserted on single successor edge of the entry block.  Then call
	commit_edge_insertions instead of inserting the instructions manually.
	* cfgrtl.c (commit_edge_insertions): Do not verify flow info during
	RTL expansion and rebuild jump labels chain.

2019-07-02  Richard Biener  <rguenther@suse.de>

	* tree-core.h (enum tree_index): Add TI_CHREC_DONT_KNOW and
	TI_CHREC_KNOWN.
	* tree.h (chrec_not_analyzed_yet, chrec_dont_know, chrec_known):
	Define here.
	* tree.c (build_common_tree_nodes): Initialize them.
	* tree-chrec.h (chrec_not_analyzed_yet, chrec_dont_know, chrec_known):
	Make declarations comments.
	* tree-scalar-evolution.c (chrec_not_analyzed_yet, chrec_dont_know,
	chrec_known): Remove definitions.
	(initialize_scalar_evolutions_analyzer): Remove.
	(scev_initialize): Do not call initialize_scalar_evolutions_analyzer.
	* tree-streamer.c (preload_common_nodes): Do not preload
	TI_CHREC_DONT_KNOW or TI_CHREC_KNOWN.

2019-07-02  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (aliasing_component_refs_p): Remove forgotten
	sanity check.

2019-07-02  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (nonoverlapping_component_refs_for_decl_p): Rename
	to ..
	(nonoverlapping_component_refs_since_match_p): ... this one;
	handle also non-decl bases; return -1 if search gave up.
	(alias_stats): Rename nonoverlapping_component_refs_of_decl_p_may_alias,
	nonoverlapping_component_refs_of_decl_p_no_alias to
	nonoverlapping_component_refs_since_match_p_may_alias,
	nonoverlapping_component_refs_since_match_p_no_alias.
	(dump_alias_stats): Update dumping.
	(aliasing_matching_component_refs_p): Break out from ...;
	dispatch to nonoverlapping_component_refs_for_decl_p
	and nonoverlapping_component_refs_since_match_p.
	(aliasing_component_refs_p): ... here; call
	nonoverlapping_component_refs_p in scenarios where we can not
	precisely determine base match.
	(decl_refs_may_alias_p): Use
	nonoverlapping_component_refs_since_match_p.
	(indirect_ref_may_alias_decl_p): Do not call
	nonoverlapping_component_refs_p.
	(indirect_refs_may_alias_p): Likewise.

2019-07-02  Jan Hubicka  <jh@suse.cz>

	* tree-inline.c (remap_gimple_stmt): Do not subtitute handled components
	to clobber of return value.

2019-07-02  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/cortex-a57.md (cortex_a57_neon_type): Use neon_arith_basic
	for is_neon_type instructions that have not already been categorized.

2019-07-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/58483
	* tree-ssa-scopedtables.c (avail_expr_hash): Use OEP_ADDRESS_OF
	for MEM_REF base hashing.
	(equal_mem_array_ref_p): Likewise for base comparison.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (signbit<mode>2_dm): Make this a
	parameterized name.
	(signbit<mode>2): Use that name.  Simplify.

2019-07-01  Joern Rennecke  <joern.rennecke@riscy-ip.com>

	PR middle-end/66726
	* tree-ssa-phiopt.c (factor_out_conditional_conversion):
	Tune heuristic from PR71016 to allow MIN / MAX.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (ieee_128bit_vsx_abs<mode>2): Make this a
	parameterized name.
	(abs<mode>2): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (ieee_128bit_vsx_neg<mode>2): Make this a
	parameterized name.
	(neg<mode>2): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (abs<mode>2_hw): Make this a parameterized
	name.
	(abs<mode>2): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (neg<mode>2_hw): Make this a parameterized
	name.
	(neg<mode>2): Use that name.  Simplify.

2019-07-01  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md ("isa" attribute): Add sse_noavx.
	("enabled" attribute): Handle sse_noavx isa attribute.
	* config/i386/mmx.md (*vec_dupv2sf): Add "isa" attribute.
	Use TARGET_SSE && SSE_REGNO_P in split condition.
	(*vec_dupv2sf): Ditto.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (extenddf<mode>2): Make this a parameterized
	name.
	(floatsi<mode>2): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (extenddf<mode>2_fprs): Make this a
	parameterized name.
	(extenddf<mode>2_vsx): Make this a parameterized name.
	(extenddf<mode>2): Use those names.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (eh_set_lr_<mode>): Make this a parameterized
	name.
	(eh_return): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (ctr<mode>): Make this a parameterized name.
	(doloop_end): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (indirect_jump<mode>_nospec): Make this a
	parameterized name.
	(indirect_jump): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (abs<mode>2_internal): Make this a
	parameterized name.
	(abs<mode>2): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (fix_trunc<mode>si2_fprs): Make this a
	parameterized name.
	(fix_trunc<mode>si2): Use that name.  Simplify.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (neg<mode>2): Make this a parameterized name.
	(allocate_stack): Use that name.  Simplify.

2019-07-01  Martin Sebor  <msebor@redhat.com>

	PR middle-end/90923
	* hash-map.h (hash_map::put): On insertion invoke element ctor.
	(hash_map::get_or_insert): Same.  Reformat comment.
	* hash-set.h (hash_set::add): On insertion invoke element ctor.
	* hash-map-tests.c (test_map_of_type_with_ctor_and_dtor): New.
	* hash-set-tests.c (test_map_of_type_with_ctor_and_dtor): New.
	* hash-table.h (hash_table::operator=): Prevent copy assignment.
	 (hash_table::hash_table (const hash_table&)): Use copy ctor
	 instead of assignment to copy elements.

2019-07-01  Wilco Dijkstra  <wdijkstr@arm.com>
	    John David Anglin  <danglin@gcc.gnu.org>

	PR target/90963
	* config/pa/pa.md (builtin_longjmp): Restore hard_frame_pointer_rtx
	using saved frame pointer.

2019-07-01  Eric Botcazou  <ebotcazou@adacore.com>

	PR middle-end/64242
	* config/sparc/sparc.md (nonlocal_goto): Restore frame pointer last.
	Add frame clobber and schedule blockage.

2019-07-01  Sandra Loosemore  <sandra@codesourcery.com>

	* doc/invoke.texi (Link Options): Further editorial changes to
	-flinker-output docs.

2019-07-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_force_indexed_or_indirect_mem):
	Load both operands of a PLUS into registers separately.

2019-07-01  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/vector.md: Fix shift count operand printing.

2019-07-01  Richard Sandiford  <richard.sandiford@arm.com>

	* ira-lives.c (process_bb_node_lives): Use ira_setup_alts.

2019-07-01  Richard Sandiford  <richard.sandiford@arm.com>

	* ira.c (ira_get_dup_out_num): Don't punt for earlyclobbers.
	Use recog_data to test for an output operand.

2019-07-01  Richard Sandiford  <richard.sandiford@arm.com>

	* ira.c (ira_setup_alts): If any valid alternatives have zero cost,
	exclude any others that are disparaged or that are bound to need
	a reload or spill.
	(ira_get_dup_out_num): Expand comment.

2019-07-01  Richard Sandiford  <richard.sandiford@arm.com>

	* ira.c (ira_setup_alts): Use preprocess_constraints to get the
	constraint string for each operand/alternative combo.  Only handle
	'%' at the start of constraint strings, and look for it outside
	the main loop.

2019-07-01  Richard Sandiford  <richard.sandiford@arm.com>

	* ira-int.h (ira_setup_alts, ira_get_dup_out_num): Use
	alternative_mask instead of HARD_REG_SET to represent a
	bitmask of alternatives.
	* ira.c (ira_setup_alts, ira_get_dup_out_num): Likewise.
	* ira-conflicts.c (add_insn_allocno_copies): Likewise.

2019-07-01  Martin Liska  <mliska@suse.cz>

	* edit-context.c (test_applying_fixits_unreadable_file): Do not
	use () for a constructor call.
	(test_applying_fixits_line_out_of_range): Likewise.
	* ggc-page.c (alloc_page): Use (void *) for %p printf format
	argument.
	(free_page): Likewise.

2019-07-01  Vladislav Ivanishin  <vlad@ispras.ru>

	* gdbhooks.py (GdbPrettyPrinters.add_printer_for_types): Reorder
	parameter names to match usage (no functional change).
	(GdbPrettyPrinters.add_printer_for_regex): Ditto.

2019-07-01  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (class pass_fre): Add may_iterate
	pass parameter.
	(pass_fre::execute): Honor it.
	* passes.def: Adjust pass_fre invocations to allow iterating,
	add non-iterating pass_fre before late threading/dom.

2019-07-01  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (copy_reference_ops_from_ref): Adjust
	TARGET_MEM_REF handling to also handle address-taken ones.

2019-07-01  Hongtao Liu  <hongtao.liu@intel.com>

	* doc/sourcebuild.texi (Effective-Target Keywords, Other
	hardware attributes): Document avx512vp2intersect.

2019-06-30  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (ssse3_abs<mode>2): Rename from abs<mode>2.
	(abs<mode>2): New expander.
	* config/i386/i386-builtin.def (__builtin_ia32_pabsb):
	Use CODE_FOR_ssse3_absv8qi2.
	(__builtin_ia32_pabsw): Use CODE_FOR_ssse3_absv4hi2.
	(__builtin_ia32_pabsd): Use CODE_FOR_ssse3_absv2si2.

2019-06-30  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (mmx_isa): Rename x64, x64_noavx and x64_avx
	to sse, sse_noavx and avx.  Update all uses.

2019-06-30  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/mmx.md (sse_movntq): Add "isa" attribute.
	(*mmx_<plusminus_insn><mode>3): Ditto.
	(*mmx_mulv4hi3"): Ditto.
	(*mmx_smulv4hi3_highpart): Ditto.
	(*mmx_umulv4hi3_highpart): Ditto.
	(*mmx_pmaddwd): Ditto.
	(*sse2_umulv1siv1di3): Ditto.
	(*mmx_<code>v4hi3): Ditto.
	(*mmx_<code>v8qi3): Ditto.
	(mmx_ashr<mode>3): Ditto.
	("mmx_<shift_insn><mode>3): Ditto.
	(*mmx_eq<mode>3): Ditto.
	(mmx_gt<mode>3): Ditto.
	(mmx_andnot<mode>3): Ditto.
	(*mmx_<code><mode>3): Ditto.
	(*mmx_pinsrw): Ditto.
	(*mmx_pextrw): Ditto.
	(mmx_pshufw_1): Ditto.
	(*mmx_uavgv8qi3): Ditto.
	(*mmx_uavgv4hi3): Ditto.
	("mmx_psadbw): Ditto.
	* config/i386/sse.md (sse_cvtps2pi): Ditto.
	(sse_cvttps2pi): Ditto.
	(ssse3_pmaddubsw): Ditto.
	(*ssse3_pmulhrswv4hi3): Ditto.
	(ssse3_psign<mode>3): Ditto.

2019-06-29  Eric Botcazou  <ebotcazou@adacore.com>

	* expr.c (expand_expr_real_1) <BIT_FIELD_REF>: Apply the big-endian
	adjustment for bit-fields to all aggregate types.

2019-06-28   Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (pcrel_address): Use
	SYMBOL_REF_LOCAL_P to determine if a label is local.
	(pcrel_external_address): New predicate.
	(non_prefixed_mem_operand): Delete, predicate not used.
	* config/rs6000/rs6000.h (SYMBOL_FLAG_PCREL_P): Delete, we now use
	SYMBOL_REF_LOCAL_P to determine if we can use pc-relative
	addressing.
	(SYMBOL_REF_PCREL_P): Likewise.

	PR target/91009
	* config/rs6000/rs6000.md (floatsi<mode>2_lfiwax): Add non-VSX
	alternative.
	(floatsi<mode>2_lfiwax_mem): Add non-VSX alternative.
	(floatunssi<mode>2_lfiwzx): Add non-VSX alternative.
	(floatunssi<mode>2_lfiwzx_mem): Add non-VSX alternative.

2019-06-28  Iain Sandoe  <iain@sandoe.co.uk>

	* config.gcc (powerpc-*-darwin*, powerpc64-*-darwin*): Remove
	override on extra_headers.

2019-06-28  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-c.c (pop_field_alignment): Quote #pragma options.
	* config/darwin-driver.c (darwin_default_min_version): Remove newline
	from warning.
	(darwin_driver_init): Likewise.

2019-06-28  Jan Beulich  <jbeulich@suse.com>

	* config/i386/sse.md (vgf2p8affineinvqb_<mode><mask_name>,
	vgf2p8affineqb_<mode><mask_name>, vgf2p8mulb_<mode><mask_name>):
	Eliminate redundant alternative.

2019-06-28  Jan Beulich  <jbeulich@suse.com>

	* config/i386/sse.md (vgf2p8affineinvqb_<mode><mask_name>,
	vgf2p8affineqb_<mode><mask_name>): Drop % constraint modifier.
	Use vector_operand.

2019-06-28  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_rtx_costs): All short instructions are
	having a lower cost regardless of the speed option.

2019-06-28  Jan Beulich  <jbeulich@suse.com>

	* config/i386/sse.md (sse2_cvtpd2pi, sse2_cvttpd2pi): Use
	vector_operand plus, on both alternatives, "Bm" constraint.

2019-06-28  Dennis Zhang  <dennis.zhang@arm.com>

	* config/arm/arm.md: Remove redundant constraints from
	define_expand but leave reload_inm and reload_outm patterns
	untouched since they need special constraints to work.
	* config/arm/arm-fixed.md: Remove redundant constraints from
	define_expand.
	* config/arm/iwmmxt.md: Likewise.
	* config/arm/neon.md: Likewise.
	* config/arm/sync.md: Likewise.
	* config/arm/thumb1.md: Likewise.
	* config/arm/vec-common.md: Likewise.

2019-06-27  Ilia Diachkov  <ilia.diachkov@optimitech.com>

	* doc/install.texi: Document --disable-tm-clone-registry.

2019-06-27  Jakub Jelinek  <jakub@redhat.com>

	PR c++/91024
	* gimplify.c (collect_fallthrough_labels): Ignore GIMPLE_PREDICT
	statements.

	PR tree-optimization/91010
	* tree-vect-stmts.c (scan_operand_equal_p): If offset1 == offset2,
	return true.  Otherwise, don't call operand_equal_p if offset1 or
	offset2 is NULL and just return false.

2019-06-27  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (darwin_rs6000_override_options): Honour
	user-specified float mode choice for kernel mode code.

2019-06-27  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.h (ENDFILE_SPEC): Correct whitespace in the
	spec.

2019-06-27  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (darwin_rs6000_override_options): Do not
	use longcall for 64b code.

2019-06-27  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* builtins.c (get_memory_rtx): Fix comment.
	* optabs.def (movmem_optab): Change to cpymem_optab.
	* expr.c (emit_block_move_via_cpymem): Change movmem to cpymem.
	(emit_block_move_hints): Change movmem to cpymem.
	* defaults.h: Change movmem to cpymem.
	* targhooks.c (get_move_ratio): Change movmem to cpymem.
	(default_use_by_pieces_infrastructure_p): Ditto.
	* config/aarch64/aarch64-protos.h: Change movmem to cpymem.
	* config/aarch64/aarch64.c (aarch64_expand_movmem): Change movmem
	to cpymem.
	* config/aarch64/aarch64.h: Change movmem to cpymem.
	* config/aarch64/aarch64.md (movmemdi): Change name to cpymemdi.
	* config/alpha/alpha.h: Change movmem to cpymem in comment.
	* config/alpha/alpha.md (movmemqi, movmemdi, *movmemdi_1): Change
	movmem to cpymem.
	* config/arc/arc-protos.h: Change movmem to cpymem.
	* config/arc/arc.c (arc_expand_movmem): Change movmem to cpymem.
	* config/arc/arc.h: Change movmem to cpymem in comment.
	* config/arc/arc.md (movmemsi): Change movmem to cpymem.
	* config/arm/arm-protos.h: Change movmem to cpymem in names.
	* config/arm/arm.c (arm_movmemqi_unaligned, arm_gen_movmemqi,
	gen_movmem_ldrd_strd, thumb_expand_movmemqi) Change movmem to cpymem.
	* config/arm/arm.md (movmemqi): Change movmem to cpymem.
	* config/arm/thumb1.md (movmem12b, movmem8b): Change movmem to cpymem.
	* config/avr/avr-protos.h: Change movmem to cpymem.
	* config/avr/avr.c (avr_adjust_insn_length, avr_emit_movmemhi,
	avr_out_movmem): Change movmem to cpymem.
	* config/avr/avr.md (movmemhi, movmem_<mode>, movmemx_<mode>):
	Change movmem to cpymem.
	* config/bfin/bfin-protos.h: Change movmem to cpymem.
	* config/bfin/bfin.c (single_move_for_movmem, bfin_expand_movmem):
	Change movmem to cpymem.
	* config/bfin/bfin.h: Change movmem to cpymem in comment.
	* config/bfin/bfin.md (movmemsi): Change name to cpymemsi.
	* config/c6x/c6x-protos.h: Change movmem to cpymem.
	* config/c6x/c6x.c (c6x_expand_movmem): Change movmem to cpymem.
	* config/c6x/c6x.md (movmemsi): Change name to cpymemsi.
	* config/frv/frv.md (movmemsi): Change name to cpymemsi.
	* config/ft32/ft32.md (movmemsi): Change name to cpymemsi.
	* config/h8300/h8300.md (movmemsi): Change name to cpymemsi.
	* config/i386/i386-expand.c (expand_set_or_movmem_via_loop,
	expand_set_or_movmem_via_rep, expand_movmem_epilogue,
	expand_setmem_epilogue_via_loop, expand_set_or_cpymem_prologue,
	expand_small_cpymem_or_setmem,
	expand_set_or_cpymem_prologue_epilogue_by_misaligned_moves,
	expand_set_or_cpymem_constant_prologue,
	ix86_expand_set_or_cpymem): Change movmem to cpymem.
	* config/i386/i386-protos.h: Change movmem to cpymem.
	* config/i386/i386.h: Change movmem to cpymem in comment.
	* config/i386/i386.md (movmem<mode>): Change name to cpymem.
	(setmem<mode>): Change expansion function name.
	* config/lm32/lm32.md (movmemsi): Change name to cpymemsi.
	* config/m32c/blkmov.md (movmemhi, movmemhi_bhi_op, movmemhi_bpsi_op,
	movmemhi_whi_op, movmemhi_wpsi_op): Change movmem to cpymem.
	* config/m32c/m32c-protos.h: Change movmem to cpymem.
	* config/m32c/m32c.c (m32c_expand_movmemhi): Change movmem to cpymem.
	* config/m32r/m32r.c (m32r_expand_block_move): Change movmem to cpymem.
	* config/m32r/m32r.md (movmemsi, movmemsi_internal): Change movmem
	to cpymem.
	* config/mcore/mcore.md (movmemsi): Change name to cpymemsi.
	* config/microblaze/microblaze.c: Change movmem to cpymem in comment.
	* config/microblaze/microblaze.md (movmemsi): Change name to cpymemsi.
	* config/mips/mips.c (mips_use_by_pieces_infrastructure_p):
	Change movmem to cpymem.
	* config/mips/mips.h: Change movmem to cpymem.
	* config/mips/mips.md (movmemsi): Change name to cpymemsi.
	* config/nds32/nds32-memory-manipulation.c
	(nds32_expand_movmemsi_loop_unknown_size,
	nds32_expand_movmemsi_loop_known_size, nds32_expand_movmemsi_loop,
	nds32_expand_movmemsi_unroll,
	nds32_expand_movmemsi): Change movmem to cpymem.
	* config/nds32/nds32-multiple.md (movmemsi): Change name to cpymemsi.
	* config/nds32/nds32-protos.h: Change movmem to cpymem.
	* config/pa/pa.c (compute_movmem_length): Change movmem to cpymem.
	(pa_adjust_insn_length): Change call to compute_movmem_length.
	* config/pa/pa.md (movmemsi, movmemsi_prereload, movmemsi_postreload,
	movmemdi, movmemdi_prereload,
	movmemdi_postreload): Change movmem to cpymem.
	* config/pdp11/pdp11.md (movmemhi, movmemhi1,
	movmemhi_nocc, UNSPEC_MOVMEM): Change movmem to cpymem.
	* config/riscv/riscv.c: Change movmem to cpymem in comment.
	* config/riscv/riscv.h: Change movmem to cpymem.
	* config/riscv/riscv.md: (movmemsi) Change name to cpymemsi.
	* config/rs6000/rs6000.md: (movmemsi) Change name to cpymemsi.
	* config/rx/rx.md: (UNSPEC_MOVMEM, movmemsi, rx_movmem): Change
	movmem to cpymem.
	* config/s390/s390-protos.h: Change movmem to cpymem.
	* config/s390/s390.c (s390_expand_movmem, s390_expand_setmem,
	s390_expand_insv): Change movmem to cpymem.
	* config/s390/s390.md (movmem<mode>, movmem_short, *movmem_short,
	movmem_long, *movmem_long, *movmem_long_31z): Change movmem to cpymem.
	* config/sh/sh.md (movmemsi): Change name to cpymemsi.
	* config/sparc/sparc.h: Change movmem to cpymem in comment.
	* config/vax/vax-protos.h (vax_output_movmemsi): Remove prototype
	for nonexistent function.
	* config/vax/vax.h: Change movmem to cpymem in comment.
	* config/vax/vax.md (movmemhi, movmemhi1): Change movmem to cpymem.
	* config/visium/visium.h: Change movmem to cpymem in comment.
	* config/visium/visium.md (movmemsi): Change name to cpymemsi.
	* config/xtensa/xtensa.md (movmemsi): Change name to cpymemsi.
	* doc/md.texi: Change movmem to cpymem and update description to match.
	* doc/rtl.texi: Change movmem to cpymem.
	* target.def (use_by_pieces_infrastructure_p): Change movmem to cpymem.
	* doc/tm.texi: Regenerate.

2019-06-27  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_option_override_internal): Enable
	-fvariable-expansion-in-unroller by default.
	* doc/invoke.texi (-fvariable-expansion-in-unroller): Document new
	default for Power.

2019-06-27  David Edelsohn  <dje.gcc@gmail.com>

	Revert
	2019-06-26  David Edelsohn  <dje.gcc@gmail.com>
	* config.gcc (powerpc-ibm-aix*): Define target_gtfiles.

	* config.gcc(rs6000-*-*): Define target_gtfiles.

2019-06-27  Jan Hubicka  <jh@suse.cz>

	* ipa-devirt.c (odr_type_d): Add tbaa_enabled flag.
	(add_type_duplicate): When odr hash is not allocated, to nothing.
	(odr_based_tbaa_p): New function.
	(set_type_canonical_for_odr_type): New function.
	* ipa-utils.h (enable_odr_based_tbaa, odr_based_tbaa_p,
	set_type_canonical_for_odr_type): New.
	* tree.c (gimple_canonical_types_compatible_p): ODR types with
	ODR based TBAA are not equivalent to non-ODR types.

2019-06-27  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90974
	PR rtl-optimization/90975
	PR rtl-optimization/90976
	PR target/91016
	PR tree-optimization/91017
	* config/i386/i386-expand.c (ix86_expand_rounddf_32): Remove
	unused tmp.
	* lra.c (lra_set_insn_recog_data): Remove a leftover from
	initial commit of IRA.
	* optabs.c (expand_twoval_binop): Use xop0 and xop1 instead
	of op0 and op1.
	* tree-vect-loop.c (vect_create_epilog_for_reduction):
	Remove unused mode1.
	* tree-vect-stmts.c (vectorizable_call): Remove dead assignment
	to new_stmt_info.

2019-06-27  Jakub Jelinek  <jakub@redhat.com>

	PR target/90991
	* config/i386/sse.md (avx_vec_concat<mode>): Use nonimmediate_operand
	instead of register_operand for operands[1], add m to its constraints
	if operands[2] uses "C" constraint.  Ensure in condition that if
	operands[2] is not 0, then operands[1] is not a MEM.  For last two
	alternatives, use unaligned loads instead of aligned if operands[1] is
	misaligned_operand.

2019-06-27  Martin Liska  <mliska@suse.cz>

	* asan.c (asan_emit_allocas_unpoison): Remove obviously
	dead assignments.
	* bt-load.c (move_btr_def): Likewise.
	* builtins.c (expand_builtin_apply_args_1): Likewise.
	(expand_builtin_apply): Likewise.
	* cfgexpand.c (expand_asm_stmt): Likewise.
	(construct_init_block): Likewise.
	* cfghooks.c (verify_flow_info): Likewise.
	* cfgloopmanip.c (remove_path): Likewise.
	* cfgrtl.c (rtl_verify_bb_layout): Likewise.
	* cgraph.c (cgraph_node::set_pure_flag): Likewise.
	* combine.c (simplify_if_then_else): Likewise.
	* config/i386/i386.c (ix86_setup_incoming_vararg_bounds): Likewise.
	(choose_basereg): Likewise.
	(ix86_expand_prologue): Likewise.
	(ix86_preferred_output_reload_class): Likewise.
	* cselib.c (cselib_record_sets): Likewise.
	* df-scan.c (df_scan_alloc): Likewise.
	* dojump.c (do_jump_by_parts_greater_rtx): Likewise.
	* early-remat.c (early_remat::record_equiv_candidates): Likewise.
	* emit-rtl.c (try_split): Likewise.
	* graphite-scop-detection.c (assign_parameter_index_in_region):
	Likewise.
	* ipa-cp.c (cgraph_edge_brings_all_agg_vals_for_node): Likewise.
	* ira-color.c (setup_profitable_hard_regs): Likewise.
	* ira.c (rtx_moveable_p): Likewise.
	* lra-eliminations.c (eliminate_regs_in_insn): Likewise.
	* read-rtl.c (read_subst_mapping): Likewise.
	* regrename.c (scan_rtx): Likewise.
	* reorg.c (fill_slots_from_thread): Likewise.
	* tree-inline.c (tree_function_versioning): Likewise.
	* tree-ssa-reassoc.c (optimize_ops_list): Likewise.
	* tree-ssa-sink.c (statement_sink_location): Likewise.
	* tree-ssa-threadedge.c (thread_across_edge): Likewise.
	* tree-vect-loop.c (vect_get_loop_niters): Likewise.
	(vect_create_epilog_for_reduction): Likewise.
	* tree.c (build_nonstandard_integer_type): Likewise.

2019-06-27  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (vn_reference_lookup_3): Encode valueized RHS.

2019-06-27  Jun Ma  <JunMa@linux.alibaba.com>

	PR tree-optimization/89772
	* gimple-fold.c (gimple_fold_builtin_memchr): consider trailing nuls in
	out-of-bound accesses checking.

2019-06-27  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/91014
	* tree-ssa-dse.c (initialize_ao_ref_for_dse): Bail out
	when LHS is NULL_TREE.

2019-06-27  Martin Liska  <mliska@suse.cz>

	* symbol-summary.h (traverse): Pass
	argument a to the call of callback.
	(gt_ggc_mx): Mark arguments as unused.
	(gt_pch_nx): Likewise.

2019-06-27  Kewen Lin  <linkw@gcc.gnu.org>

	PR target/62147
	* loop-iv.c (find_simple_exit): Call finite_loop_p to update
	finiteness.

2019-06-26  Jeff Law  <law@redhat.com>

	PR tree-optimization/90883
	* tree-ssa-dse.c (delete_dead_or_redundant_call): Fix signature.
	(delete_dead_or_redundant_assignment): Likewise.

	PR tree-optimization/90883
	* tree-ssa-alias.c (stmt_kills_ref_p): Handle BUILT_IN_CALLOC.
	* tree-ssa-dse.c: Update various comments to distinguish between
	dead and redundant stores.
	(initialize_ao_ref_for_dse): Handle BUILT_IN_CALLOC.
	(dse_optimize_redundant_stores): New function.
	(delete_dead_or_redundant_call): Renamed from delete_dead_call.
	Distinguish between dead and redundant calls in dump output.  All
	callers updated.
	(delete_dead_or_redundant_assignment): Similarly for assignments.
	(dse_optimize_stmt): Handle _CHK variants.  For statements which
	store 0 into multiple memory locations, try to prove a subsequent
	store is redundant.

2019-06-26  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89021
	* config/i386/i386.c (ix86_autovectorize_vector_sizes):
	Autovectorize 8-byte vectors for TARGET_MMX_WITH_SSE.

2019-06-26  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000-internal.h (branch_island): New typedef.
	(branch_islands): New extern.
	* config/rs6000/rs6000-logue.c (macho_branch_islands): Moved from
	* config/rs6000/rs6000.c: .. here.

2019-06-26  Iain Sandoe  <iain@sandoe.co.uk>

	* config.gcc (powerpc*-*-linux*): Move target_gtfiles from here..
	(powerpc*-*-*) ... to here.

2019-06-26  Jeff Law  <law@redhat.com>

	* tree-ssa-dse.c (initialize_ao_ref_for_dse): Handle _chk variants of
	memcpy, memmove and memset builtins.
	(maybe_trim_memstar_call): Likewise.

2019-06-26  David Edelsohn  <dje.gcc@gmail.com>

	* config/rs6000/rs6000-logue.c: Add #ifndef TARGET_PROFILE_KERNEL.

2019-06-26  David Edelsohn  <dje.gcc@gmail.com>

	* config.gcc (powerpc-ibm-aix*): Define target_gtfiles.

2019-06-26  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-internal.h (rs6000_keep_leaf_when_profiled): New
	declaration.
	* config/rs6000/rs6000-logue.c (rs6000_keep_leaf_when_profiled): Remove
	"static".
	* config/rs6000/rs6000-logue.c (rs6000_keep_leaf_when_profiled): Delete
	declaration.

2019-06-26  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c: Fix previous commit, it missed some changes.

2019-06-26  Richard Biener  <rguenther@suse.de>

	PR ipa/90982
	* tree-inline.c (remap_ssa_name): Copy SSA range info.

2019-06-26  Richard Biener  <rguenther@suse.de>

	* lto-streamer.h (lto_bitmap_alloc): Remove.
	(lto_bitmap_free): Likewise.
	* lto-streamer.c (lto_bitmap_alloc): Remove.
	(lto_bitmap_free): Likewise.
	(lto_obstack): Likewise.
	(lto_obstack_initialized): Likewise.
	* lto-streamer-out.c (lto_output): Use own obstack for local
	bitmap, free it consistently.

2019-06-26  Jakub Jelinek  <jakub@redhat.com>

	PR target/90991
	* config/i386/sse.md
	(*<extract_type>_vinsert<shuffletype><extract_suf>_0): Use vmovupd,
	vmovups, vmovdqu, vmovdqu32 or vmovdqu64 instead of the aligned
	insns if operands[2] is misaligned_operand.

2019-06-26  Li Jia He  <helijia@linux.ibm.com>

	* config/rs6000/rs6000.h (TARGET_MADDLD): Remove the restriction of
	TARGET_POWERPC64.
	* config/rs6000/rs6000.md (maddld): Change maddld match_operand from DI
	to GPR.

2019-06-26  Segher Boessenkool  <segher@kernel.crashing.org>

	* doc/invoke.texi (Warning Options): Fix some @opindex syntax.

2019-06-26  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90973
	* tree-vect-loop.c (vect_get_known_peeling_cost): Use
	epilogue_cost_vec instead of prologue_cost_vec for
	a epilogue cost.

2019-06-26  Martin Liska  <mliska@suse.cz>

	* bb-reorder.c (connect_better_edge_p): Add missing else
	statement in the middle of if-else statements.

2019-06-25  Hongtao Liu  <hongtao.liu@intel.com>
	    H.J. Lu  <hongjiu.lu@intel.com>
	    Olga Makhotina  <olga.makhotina@intel.com>

	* common/config/i386/i386-common.c
	(OPTION_MASK_ISA_AVX512VP2INTERSECT_SET,
	OPTION_MASK_ISA_AVX512VP2INTERSECT_UNSET): New macros.
	(OPTION_MASK_ISA2_AVX512F_UNSET): Add
	OPTION_MASK_ISA_AVX512VP2INTERSECT_UNSET.
	(ix86_handle_option): Handle -mavx512vp2intersect.
	* config/i386/avx512vp2intersectintrin.h: New.
	* config/i386/avx512vp2intersectvlintrin.h: New.
	* config/i386/cpuid.h (bit_AVX512VP2INTERSECT): New.
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect
	AVX512VP2INTERSECT.
	* config/i386/i386-builtin-types.def: Add new types.
	* config/i386/i386-builtin.def: Add new builtins.
	* config/i386/i386-builtins.c: (enum processor_features): Add
	F_AVX512VP2INTERSECT.
	(static const _isa_names_table isa_names_table): Ditto.
	* config/i386/i386-c.c (ix86_target_macros_internal): Define
	__AVX512VP2INTERSECT__.
	* config/i386/i386-expand.c (ix86_expand_builtin): Expand
	IX86_BUILTIN_2INTERSECTD512, IX86_BUILTIN_2INTERSECTQ512,
	IX86_BUILTIN_2INTERSECTD256, IX86_BUILTIN_2INTERSECTQ256,
	IX86_BUILTIN_2INTERSECTD128, IX86_BUILTIN_2INTERSECTQ128.
	* config/i386/i386-modes.def (P2QI, P2HI): New modes.
	* config/i386/i386-options.c (ix86_target_string): Add
	-mavx512vp2intersect.
	(ix86_option_override_internal): Handle AVX512VP2INTERSECT.
	* config/i386/i386.c (ix86_hard_regno_nregs): Allocate two regs for
	P2HImode and P2QImode.
	(ix86_hard_regno_mode_ok): Register pair only starts at even hardreg
	number for P2QImode and P2HImode.
	(ix86_regmode_natural_size): New function.
	* config/i386/i386.h (TARGET_AVX512VP2INTERSECT,
	TARGET_AVX512VP2INTERSECT_P, PTA_AVX512VP2INTERSECT
	REGMODE_NATURAL_SIZE, MASK_PAIR_REGNO_P): New.
	* config/i386/i386-protos.h (ix86_regmode_natural_size): Declare
	* config/i386/i386.opt: Add -mavx512vp2intersect.
	* config/i386/immintrin.h: Include avx512vp2intersectintrin.h and
	avx512vp2intersectvlintrin.h.
	* config/i386/sse.md (define_c_enum "unspec"): Add UNSPEC_VP2INTERSECT.
	(define_mode_iterator VI48_AVX512VP2VL): New.
	(avx512vp2intersect_2intersect<mode>,
	avx512vp2intersect_2intersectv16si): New define_insn patterns.
	* config.gcc: Add avx512vp2intersectvlintrin.h and
	avx512vp2intersectintrin.h to extra_headers.
	* doc/invoke.texi: Document -mavx512vp2intersect.

2019-06-25  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.h (ENDFILE_SPEC): New.

2019-06-25  Bill Seurer  <seurer@linux.vnet.ibm.com>

	* config/rs6000/rs6000.c (stack_info, rs6000_pic_labelno,
	savres_routine_syms, savres_routine_name, morestack_ref,
	rs6000_init_machine_status, save_reg_p, first_reg_to_save,
	first_fp_reg_to_save, first_altivec_reg_to_save, compute_vrsave_mask,
	compute_save_world_info, is_altivec_return_reg, fixed_reg_p,
	rs6000_savres_strategy, rs6000_stack_info, debug_stack_info,
	rs6000_return_addr, rs6000_decl_ok_for_sibcall,
	rs6000_function_ok_for_sibcall, rs6000_ra_ever_killed,
	rs6000_emit_load_toc_table, rs6000_emit_eh_reg_restore, uses_TOC,
	create_TOC_reference, rs6000_aix_asm_output_dwarf_table_ref,
	rs6000_emit_stack_tie, rs6000_emit_allocate_stack_1,
	get_stack_clash_protection_probe_interval,
	get_stack_clash_protection_guard_size,
	rs6000_emit_probe_stack_range_stack_clash, rs6000_emit_allocate_stack,
	rs6000_emit_probe_stack_range, output_probe_stack_range_1,
	interesting_frame_related_regno, output_probe_stack_range_stack_clash,
	output_probe_stack_range, rs6000_frame_related, generate_set_vrsave,
	gen_frame_set, gen_frame_load, gen_frame_store, emit_frame_save,
	gen_frame_mem_offset, rs6000_savres_routine_name,
	rs6000_savres_routine_sym, rs6000_emit_stack_reset,
	ptr_regno_for_savres, rs6000_emit_savres_rtx,
	rs6000_emit_prologue_move_from_cr, split_stack_arg_pointer_used_p,
	rs6000_global_entry_point_prologue_needed_p,
	rs6000_get_separate_components, rs6000_components_for_bb,
	rs6000_disqualify_components, rs6000_emit_prologue_components,
	rs6000_emit_epilogue_components, rs6000_set_handled_components,
	emit_vrsave_prologue, emit_split_stack_prologue, rs6000_emit_prologue,
	rs6000_output_savres_externs, rs6000_output_function_prologue,
	rs6000_keep_leaf_when_profiled, load_cr_save, restore_saved_cr,
	load_lr_save, restore_saved_lr, add_crlr_cfa_restore,
	offset_below_red_zone_p, emit_cfa_restores, rs6000_emit_epilogue,
	rs6000_output_function_epilogue, gen_add3_const,
	rs6000_expand_split_stack_prologue, rs6000_live_on_entry,
	rs6000_split_stack_space_check, rs6000_save_toc_in_prologue_p): Moved
	to rs6000-logue.c.
	(machine_function): Moved to rs6000.h.
	(rs6000_stack_t, ALTIVEC_REG_BIT, quad_address_offset_p) Moved to
	rs6000-internal.h.
	* config/rs6000/rs6000-logue.c(stack_info, rs6000_pic_labelno,
	savres_routine_syms, savres_routine_name, morestack_ref,
	rs6000_init_machine_status, save_reg_p, first_reg_to_save,
	first_fp_reg_to_save, first_altivec_reg_to_save, compute_vrsave_mask,
	compute_save_world_info, is_altivec_return_reg, fixed_reg_p,
	rs6000_savres_strategy, rs6000_stack_info, debug_stack_info,
	rs6000_return_addr, rs6000_decl_ok_for_sibcall,
	rs6000_function_ok_for_sibcall, rs6000_ra_ever_killed,
	rs6000_emit_load_toc_table, rs6000_emit_eh_reg_restore, uses_TOC,
	create_TOC_reference, rs6000_aix_asm_output_dwarf_table_ref,
	rs6000_emit_stack_tie, rs6000_emit_allocate_stack_1,
	get_stack_clash_protection_probe_interval,
	get_stack_clash_protection_guard_size,
	rs6000_emit_probe_stack_range_stack_clash, rs6000_emit_allocate_stack,
	rs6000_emit_probe_stack_range, output_probe_stack_range_1,
	interesting_frame_related_regno, output_probe_stack_range_stack_clash,
	output_probe_stack_range, rs6000_frame_related, generate_set_vrsave,
	gen_frame_set, gen_frame_load, gen_frame_store, emit_frame_save,
	gen_frame_mem_offset, rs6000_savres_routine_name,
	rs6000_savres_routine_sym, rs6000_emit_stack_reset,
	ptr_regno_for_savres, rs6000_emit_savres_rtx,
	rs6000_emit_prologue_move_from_cr, split_stack_arg_pointer_used_p,
	rs6000_global_entry_point_prologue_needed_p,
	rs6000_get_separate_components, rs6000_components_for_bb,
	rs6000_disqualify_components, rs6000_emit_prologue_components,
	rs6000_emit_epilogue_components, rs6000_set_handled_components,
	emit_vrsave_prologue, emit_split_stack_prologue, rs6000_emit_prologue,
	rs6000_output_savres_externs, rs6000_output_function_prologue,
	rs6000_keep_leaf_when_profiled, load_cr_save, restore_saved_cr,
	load_lr_save, restore_saved_lr, add_crlr_cfa_restore,
	offset_below_red_zone_p, emit_cfa_restores, rs6000_emit_epilogue,
	rs6000_output_function_epilogue, gen_add3_const,
	rs6000_expand_split_stack_prologue, rs6000_live_on_entry,
	rs6000_split_stack_space_check, rs6000_save_toc_in_prologue_p): Moved
	to here from rs6000.c.
	* config/rs6000/rs6000.h (machine_function): Moved to here from rs6000.c.
	* config/rs6000/rs6000-internal.h: (rs6000_stack_t, ALTIVEC_REG_BIT,
	quad_address_offset_p) Moved to here from rs6000.c.
	* config/rs6000/t-rs6000: Add new source file rs6000-logue.c.
	* config/config.gcc: Add new source file rs6000-logue.c to garbage
	collector.

2019-06-25  Martin Liska  <mliska@suse.cz>

	* hash-table.c (hashtab_chk_error): Move here from ...
	* hash-table.h (hashtab_chk_error): ... here.

2019-06-25  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90978
	* df-scan.c (df_update_entry_block_defs): Remove dead else
	branch.
	(df_update_exit_block_uses): Likewise.

2019-06-25  Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Andrew Stubbs  <ams@codesourcery.com>

	* config.gcc (thread_file): Set to gcn for AMD GCN.
	* config/gcn/gcn.c (gcn_emutls_var_init): New function.
	(TARGET_EMUTLS_VAR_INIT): New hook.

2019-06-25  Martin Jambor  <mjambor@suse.cz>

	PR ipa/90939
	* ipa-cp.c (ipcp_bits_lattice::meet_with): Remove assert.

2019-06-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90930
	* tree-ssa-reassoc.c (reassociate_bb): Only rewrite expression
	into parallel form in the last pass instance.

2019-06-25  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_symbol_binds_local_p): New function.
	(arc_legitimize_pic_address): Simplify and cleanup the function.
	(SYMBOLIC_CONST): Remove.
	(prepare_pic_move): Likewise.
	(prepare_move_operands): Handle complex mov cases here.
	(arc_legitimize_address_0): Remove call to
	arc_legitimize_pic_address.
	(arc_legitimize_address): Remove call to
	arc_legitimize_tls_address.
	* config/arc/arc.md (movqi_insn): Allow Cm3 match.
	(movhi_insn): Likewise.

2019-06-25  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.h: Use __int20__ for SIZE_TYPE and
	PTRDIFF_TYPE.
	* gimple-ssa-sprintf.c (build_intmax_type_nodes): Accept "__intN__"
	format of "__intN" types for UINTMAX_TYPE.
	* stor-layout.c (initialize_sizetypes): Accept "__intN__"
	format of "__intN" types for SIZETYPE.
	* tree.c (build_common_tree_nodes): Accept "__intN__"
	format of "__intN" types for SIZE_TYPE and PTRDIFF_TYPE.
	* doc/invoke.texi: Document that __intN__ disables pedantic
	warnings.

2019-06-25  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (indirect_ref_may_alias_decl_p): Check that
	base2_alias_set is non-zero before doing TBAA based disambiguation.

2019-06-25  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90973
	* tree-vect-loop.c (vect_get_known_peeling_cost): Sum retval
	of prologue and epilogue.

2019-06-24  Jan Hubicka  <jh@suse.cz>

	* ipa-utils.h (type_with_linkage_p): Verify that type is
	CXX_ODR_P.
	(odr_type_p): Remove extra return.
	* lto-streamer-out.c (hash_tree): Hash TYPE_CXX_ODR_P;
	hash STRING_FLAG only for arrays and integers.
	* tree-stremaer-in.c (unpack_ts_type_common_value_fields):
	Update analogously.
	* tree-streamer-out.c (pack_ts_type_common_value_fields):
	Likewise.
	* print-tree.c (print_node): Print cxx-odr-p
	and string-flag.
	* tree.c (need_assembler_name_p): Also check that type
	is CXX_ODR_TYPE_P
	(verify_type_variant): Update verification of SRING_FLAG;
	also check CXX_ODR_P.
	* tree.h (ARRAY_OR_INTEGER_TYPE_CHECK): New macro.
	(TYPE_STRING_FLAG): Use it.
	(TYPE_CXX_ODR_P): New macro.
	* dwarf2out.c (gen_array_type_die): First check that type
	is an array and then test string flag.

2019-06-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90972
	* tree-vect-stmts.c (vect_init_vector): Handle CONSTANT_CLASS_P
	in common code, dealing with STRING_CST properly.

2019-06-24  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90930
	PR tree-optimization/90316
	* tree-ssa-alias.c (walk_non_aliased_vuses): Add missing
	decrement of limit.

2019-06-24  Martin Sebor  <msebor@redhat.com>

	* tree-pretty-print.h: Remove unnecessary punctuation characters
	from a diagnostic.
	* tree-ssa.c (release_defs_bitset): Correct preprocessor conditional.

2019-06-24  Jonathan Wakely  <jwakely@redhat.com>

	* ginclude/float.h (FLT_DECIMAL_DIG, DBL_DECIMAL_DIG, LDBL_DECIMAL_DIG)
	(FLT_HAS_SUBNORM, DBL_HAS_SUBNORM, LDBL_HAS_SUBNORM, FLT_TRUE_MIN)
	(DBL_TRUE_MIN, LDBL_TRUE_MIN): Also define for C++17.

2019-06-23  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.h: Handle GCC target pragma.

2019-06-23  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/darwin.h: (__PPC__, __PPC64__): New.

2019-06-22  Jeff Law  <law@redhat.com>

	* config/avr/avr.c (TARGET_BUILTIN_SETJMP_FRAME_VALUE): Remove.

2019-06-22  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (nonoverlapping_component_refs_p): Do not
	give up on bitfields; continue searching for different refs
	appearing later.

2019-06-21  Jakub Jelinek  <jakub@redhat.com>

	* tree-vect-data-refs.c (vect_find_stmt_data_reference): Handle
	even zero DR_OFFSET, but DR_BASE_ADDRESS of POINTER_PLUS_EXPR
	containing the offset as possible simd lane access.  Look through
	widening conversion.  Move the
	TREE_CODE (DR_INIT (newdr)) == INTEGER_CST test earlier and reindent.

2019-06-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90930
	* tree-ssa-reassoc.c (rewrite_expr_tree_parallel): Set visited
	flag on new stmts to avoid re-processing them.

2019-06-21  Matthew Beliveau  <mbelivea@redhat.com>

	PR c++/90875 - added -Wswitch-outside-range option
	* doc/invoke.texi (Wswitch-outside-range): Document.

2019-06-21  Jeff Law  <law@redhat.com>

	PR tree-optimization/90949
	* tree-ssa-copy.c (fini_copy_prop): Use reset_flow_sensitive_info.
	* tree-ssanames.c (reset_flow_sensitive_info): Reset non-null state.

2019-06-21  Richard Biener  <rguenther@suse.de>

	PR debug/90914
	* dwarf2out.c (prune_unused_types_walk): Always consider
	function-local extern declarations as used.

2019-06-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90913
	* tree-vect-loop-manip.c (vect_loop_versioning): Do not re-use
	the scalar variant of if-conversion versioning.

2019-06-21  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (lower_rec_simd_input_clauses): Add rvar2 argument,
	create another "omp scan inscan exclusive" array if
	!ctx->scan_inclusive.
	(lower_rec_input_clauses): Handle exclusive scan inscan reductions.
	(lower_omp_scan): Likewise.
	* tree-vectorizer.h (struct _stmt_vec_info): Use 3-bit instead of
	2-bit bitfield for simd_lane_access_p member.
	* tree-vect-data-refs.c (vect_analyze_data_refs): Also handle
	aux == (void *)-4 as simd lane access.
	* tree-vect-stmts.c (check_scan_store): Handle exclusive scan.  Update
	comment with permutations to show the canonical permutation order.
	(vectorizable_scan_store): Handle exclusive scan.
	(vectorizable_store): Call vectorizable_scan_store even for
	STMT_VINFO_SIMD_LANE_ACCESS_P > 3.

	* tree-vect-data-refs.c (vect_find_stmt_data_reference): Handle
	"omp simd array" arrays with one byte elements.

2019-06-20  Uroš Bizjak  <ubizjak@gmail.com>

	* config/alpha/alpha.md (@unaligned_store<mode>):
	Rename from unaligned_store<mode>.
	(@reload_in<mode>_aligned): Rename from reload_in<mode>_aligned.
	* config/alpha/sync.md (@load_locked_<mode>): Rename
	from load_locked_<mode>.
	(@store_conditional_<mode>): Rename from store_conditional_<mode>.
	(@atomic_compare_and_swap<mode>_1): Rename
	from atomic_compare_and_swap<mode>_1.
	(@atomic_exchange<mode>_1): Rename from atomic_exchange<mode>_1.
	* config/alpha/alpha.c (alpha_expand_mov_nobwx):
	Use gen_reload_in_aligned and gen_unaligned_store.
	(emit_load_locked): Remove.
	(emit_store_conditional): Ditto.
	(alpha_split_atomic_op): Use gen_load_locked and gen_store_conditional.
	(alpha_split_compare_and_swap): Ditto.
	(alpha_expand_compare_and_swap_12): Use gen_atomic_compare_and_swap_1.
	(alpha_split_compare_and_swap_12): Use gen_load_locked
	and gen_store_conditional.
	(alpha_split_atomic_exchange): Ditto.
	(alpha_expand_atomic_exchange_12): Use gen_atomic_exchange_1.
	(alpha_split_atomic_exchange_12): Use gen_load_locked
	and gen_store_conditional.

2019-06-20  Richard Earnshaw  <rearnsha@arm.com>

	* config/aarch64/aarch64-errata.h: New file.
	* config/aarch64/aarch64-elf-raw.h (CA53_ERR_835769_SPEC): Delete.
	(CA53_ERR_843419_SPEC): Delete.
	(LINK_SPEC): Use AARCH64_ERRATA_LINK_SPEC instead of above.
	* config/aarch64/aarch64-linux.h: Likewise.
	* config/aarch64/aarch64-netbsd.h: Likewise.
	* config/aarch64/aarch64-freebsd.h: Likewise.

2019-06-20  Marek Polacek  <polacek@redhat.com>

	* config/sh/sh.c (sh2a_function_vector_p): Use get_attribute_name.

2019-06-20  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000.md (isa attribute): Add support for
	for a future processor.

2019-06-20  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/54855
	* config/i386/i386-expand.c (ix86_expand_vector_set): Generate
	standard scalar operation pattern for V2DF.
	* config/i386/sse.md (*<sse>_vm<plusminus_insn><mode>3): New.
	(*<sse>_vm<multdiv_mnemonic><mode>3): Likewise.
	(*ieee_<ieee_maxmin><mode>3): Likewise.
	(vec_setv2df_0): Likewise.

2019-06-20  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (aliasing_component_refs_p): Remove ref2_is_decl
	parameter; it has no use in gimple memory model.
	(indirect_ref_may_alias_decl_p): Update.

2019-06-20  Martin Liska  <mliska@suse.cz>

	* params.def (PARAM_HASH_TABLE_VERIFICATION_LIMIT): Decrease
	to 10.

2019-06-20  Jakub Jelinek  <jakub@redhat.com>

	* tree-vect-stmts.c (enum scan_store_kind): New type.
	(scan_store_can_perm_p): Change last argument from int * to
	vec<enum scan_store_kind> *, record precisely which permutations
	need whole vector left shift or that plus VEC_COND_EXPR.
	(vectorizable_scan_store): Adjust caller, use whole vector left shift
	and additional VEC_COND_EXPR only for those iterations that need it.

2019-06-20  Alexandre Oliva  <oliva@adacore.com>

	* config.gcc: Fix ARM --with-fpu checking and error message.

2019-06-19  Marek Polacek  <polacek@redhat.com>

	PR c++/60364 - noreturn after first decl not diagnosed.
	* attribs.c (get_attribute_namespace): No longer static.
	(decl_attributes): Avoid shadowing.  Preserve the C++11 form for C++11
	attributes.
	(attr_noreturn_exclusions): Make it extern.
	* attribs.h (get_attribute_namespace): Declare.
	* tree-inline.c (function_attribute_inlinable_p): Use
	get_attribute_name.

2019-06-19  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/90626
	* tree-ssa-strlen.c (strxcmp_unequal): Fix typos.

	PR tree-optimization/90626
	* tree-ssa-strlen.c (strxcmp_unequal): New function.
	(handle_builtin_string_cmp): Call it.

2019-06-19  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.h (DRIVER_SELF_SPECS): Add RDYNAMIC, DARWIN_PIE_SPEC
	and DARWIN_NOPIE_SPEC.
	(RDYNAMIC): New, modified from DARWIN_EXPORT_DYNAMIC.
	(DARWIN_PIE_SPEC): Collate from darwin.h and darwin9.h.
	(DARWIN_NOPIE_SPEC): Collate from darwin10.h.
	(DARWIN_NOCOMPACT_UNWIND): New from darwin10.h
	(DARWIN_EXPORT_DYNAMIC): Delete.
	* config/darwin10.h (LINK_GCC_C_SEQUENCE_SPEC): Move no_compact_unwind
	and pie options processing to  darwin.h.
	* config/darwin9.h (DARWIN_PIE_SPEC): Move pie processing to darwin.h

2019-06-19  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-driver.c (darwin_driver_init): Fix off-by-one errors
	in computing the number of options to be moved.

2019-06-19  Maya Rashish  <coypu@sdf.org>

	*  config/arm/netbsd-elf.h (SYSARCH_ARM_SYNC_ICACHE): New definition.
	(CLEAR_INSN_CACHE) Use it.

2019-06-19  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (cmpstrnsi): Remove dead code.

2019-06-19  Wilco Dijkstra  <wdijkstr@arm.com>

	PR middle-end/84521
	* builtins.c (expand_builtin_setjmp_setup): Save
	hard_frame_pointer_rtx.
	(expand_builtin_setjmp_receiver): Do not emit sfp = fp move since we
	restore fp.
	* function.c (expand_function_start): Save hard_frame_pointer_rtx for
	non-local goto.
	* lra-eliminations.c (eliminate_regs_in_insn): Remove sfp = fp
	elimination code.
	(remove_reg_equal_offset_note): Remove unused function.
	* reload1.c (eliminate_regs_in_insn): Remove sfp = hfp elimination
	code.
	* config/arc/arc.c (TARGET_BUILTIN_SETJMP_FRAME_VALUE): Remove.
	(arc_builtin_setjmp_frame_value): Remove function.
	* config/avr/avr.c  (TARGET_BUILTIN_SETJMP_FRAME_VALUE): Remove.
	(avr_builtin_setjmp_frame_value): Remove function.
	* config/i386/i386.c (TARGET_BUILTIN_SETJMP_FRAME_VALUE): Remove.
	(ix86_builtin_setjmp_frame_value): Remove function.
	* config/pa/pa.md (nonlocal_goto): Remove FP adjustment.
	* config/sparc/sparc.c (TARGET_BUILTIN_SETJMP_FRAME_VALUE): Remove.
	(sparc_builtin_setjmp_frame_value): Remove function.
	* config/vax/vax.c (TARGET_BUILTIN_SETJMP_FRAME_VALUE): Remove.
	(vax_builtin_setjmp_frame_value): Remove function.
	* config/xtensa/xtensa.c (xtensa_frame_pointer_required): Force frame
	pointer	if has_nonlocal_label.

2019-06-19  Jakub Jelinek  <jakub@redhat.com>

	* doc/md.texi: Document vec_shl_<mode> pattern.
	* optabs.def (vec_shl_optab): New optab.
	* optabs.c (shift_amt_for_vec_perm_mask): Add shift_optab
	argument, if == vec_shl_optab, check for left whole vector shift
	pattern rather than right shift.
	(expand_vec_perm_const): Add vec_shl_optab support.
	* optabs-query.c (can_vec_perm_var_p): Mention also vec_shl optab
	in the comment.
	* tree-vect-generic.c (lower_vec_perm): Support permutations which
	can be handled by vec_shl_optab.
	* tree-vect-stmts.c (scan_store_can_perm_p): New function.
	(check_scan_store): Use it.
	(vectorizable_scan_store): If target can't do normal permutations,
	try to use whole vector left shifts and if needed a VEC_COND_EXPR
	after it.
	* config/i386/sse.md (vec_shl_<mode>): New expander.

	* omp-low.c (lower_rec_input_clauses): Handle references properly
	in inscan clauses.
	(lower_omp_scan): Likewise.

2019-06-19  Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* tree-ssa-address.c (preferred_mem_scale_factor): Handle when
	mem_mode is BLKmode.

2019-06-18  Max Filippov  <jcmvbkbc@gmail.com>

	PR target/90922
	* config/xtensa/xtensa.c (xtensa_expand_prologue): Add stack
	pointer adjustment for the case of no callee-saved registers and
	stack frame bigger than 128 bytes.

2019-06-18  Thomas Schwinge  <thomas@codesourcery.com>

	PR middle-end/90862
	* omp-low.c (check_omp_nesting_restrictions): Handle
	GF_OMP_TARGET_KIND_OACC_DECLARE.

2019-06-18  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (@cmp<mode>_1): Rename from cmp<mode>_1.
	(@add<mode>3_carry): Rename from add<mode>3_carry.
	(@sub<mode>3_carry_ccc): Rename from sub<mode>3_carry_ccc.
	(@sub<mode>3_carry_ccgz): Rename form sub<mode>3_carry_ccgz.
	(@copysign<mode>3_const): Rename from copysign<mode>3_const.
	(@copysign<mode>3_var): Rename from copysign<mode>3_var.
	(@xorsign<mode>3_1): Rename from xorsign<mode>3_1.
	(@x86_shift<mode>_adj_1): Rename from x86_shift<mode>_adj_1.
	(@x86_shift<mode>_adj_2): Rename from x86_shift<mode>_adj_2.
	(@x86_shift<mode>_adj_3): Rename from x86_shift<mode>_adj_3.
	(cmpstrnsi): Use gen_cmp_1.
	(lwp_slwpcb): Use gen_lwp_slwpcb_1.
	(@lwp_slwpcb<mode>_1): Rename from lwp_slwpcb<mode>_1.
	(@umonitor_<mode>): Rename from umonitor_<mode>.
	* config/i386/i386-expand.c (ix86_expand_copysign):
	Use gen_copysign3_const and gen_copysign3_var.
	(ix86_expand_xorsign): Use gen_xorsign3_1.
	(ix86_expand_branch): Use gen_sub3_carry_ccc,
	gen_sub3_carry_ccgz and gen_cmp1.
	(ix86_expand_int_addcc): Use gen_sub3_carry and gen_add3_carry.
	(ix86_split_ashl): Use gen_x86_shift_adj_1 and gen_x86_shift_adj_2.
	(ix86_split_ashr): Use gen_x86_shift_adj_1 and gen_x86_shift_adj_3.
	(ix86_split_lshr): Ditto.
	(ix86_expand_builtin) <case IX86_BUILTIN_UMONITOR>: Use gen_umonitor.

2019-06-18  Jason Merrill  <jason@redhat.com>

	* tree.c (build_constructor): Add MEM_STAT_DECL.

2019-06-18  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-modes.def (CC_NZC): New CC_MODE.
	* config/aarch64/aarch64-sve.md (*<optab><mode>3_cc)
	(ptest_ptrue<mode>, while_ult<GPI:mode><PRED_ALL:mode>)
	(*while_ult<GPI:mode><PRED_ALL:mode>_cc, *cmp<cmp_op><mode>)
	(*cmp<cmp_op><mode>_ptest, *cmp<cmp_op><mode>_cc)
	(*pred_cmp<cmp_op><mode>_combine, *pred_cmp<cmp_op><mode>)
	(vec_cmp<mode><vpred>, vec_cmpu<mode><vpred>, cbranch<mode>4):
	Use CC_NZC instead of CC.
	* config/aarch64/aarch64.md (condjump): Print a '.' in SVE conditions.
	* config/aarch64/aarch64.c (aarch64_sve_condition_codes): New variable.
	(aarch64_print_operand): Handle E_CC_NZCmode.
	(aarch64_emit_sve_ptrue_op_cc): Use gen_set_clobber_cc_nzc instead
	of gen_set_clobber_cc.

2019-06-18  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md: Tabify file.

2019-06-18  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_pfalse_reg): Declare.
	* config/aarch64/aarch64.c (aarch64_pfalse_reg): New function.
	* config/aarch64/aarch64-sve.md: Use it.

2019-06-18  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_ptrue_reg): Declare.
	* config/aarch64/aarch64.c (aarch64_ptrue_reg): New functions.
	(aarch64_expand_sve_widened_duplicate, aarch64_expand_sve_mem_move)
	(aarch64_maybe_expand_sve_subreg_move, aarch64_evpc_rev_local)
	(aarch64_expand_sve_vec_cmp_int): Use it.
	(aarch64_expand_sve_vec_cmp_float): Likewise.
	* config/aarch64/aarch64-sve.md: Likewise throughout.

2019-06-18  Richard Sandiford  <richard.sandiford@arm.com>
	    Kugan Vivekanandarajah  <kuganv@linaro.org>

	* config/aarch64/aarch64-sve.md (*cond_<optab><mode>_0): Delete.
	(*cond_<optab><mode>_z): Fold into...
	(*cond_<optab><mode>_any): ...here.  Also handle cases in which
	operand 4 can be tied to operand 0 (either inherently or via RA).

2019-06-18  Richard Biener  <rguenther@suse.de>

	PR debug/90900
	* cfgexpand.c (expand_debug_expr): Treat NOTE_P DECL_RTL
	as if optimized away.

2019-06-18  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx-protos.h (gen_set_softstack_insn): Remove.
	* config/nvptx/nvptx.c (gen_set_softstack_insn): Remove.
	* config/nvptx/nvptx.md (define_insn "set_softstack_<mode>"):
	Rename to ...
	(define_insn "@set_softstack_<mode>"): ... this.
	(define_insn "omp_simt_enter_<mode>"): Rename to ...
	(define_insn "@omp_simt_enter_<mode>"): ... this.
	(define_insn "omp_simt_exit_<mode>"): Rename to ...
	(define_insn "@omp_simt_exit_<mode>"): ... this.

2019-06-18  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop-manip.c (vect_set_loop_masks_directly): Remove
	vf parameter.  Restore the previous iv step of nscalars_step,
	but give it iv_type rather than compare_type.  Tweak code order
	to match the comments.
	(vect_set_loop_condition_masked): Update accordingly.
	* tree-vect-loop.c (vect_verify_full_masking): Use "unsigned int"
	for iv_precision.  Tweak comment formatting.

2019-06-18  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c: Strip trailing whitespace.

2019-06-18  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_emit_unwind_label): New default to false.
	(darwin_override_options): Set darwin_emit_unwind_label as needed.

2019-06-18  Martin Jambor  <mjambor@suse.cz>

	PR ipa/90889
	* ipa-cp.c (ignore_edge_p): Do not ignore edges when only the
	caller does not have flag_ipa_cp set.

2019-06-18  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	* config/aarch64/aarch64-sve.md (mask_fold_left_plus_<mode>): Renamed
	from "*fold_left_plus_<mode>", updated operands order.
	* doc/md.texi (mask_fold_left_plus_@var{m}): Documented new optab.
	* internal-fn.c (mask_fold_left_direct): New define.
	(expand_mask_fold_left_optab_fn): Likewise.
	(direct_mask_fold_left_optab_supported_p): Likewise.
	* internal-fn.def (MASK_FOLD_LEFT_PLUS): New internal function.
	* optabs.def (mask_fold_left_plus_optab): New optab.
	* tree-vect-loop.c (mask_fold_left_plus_optab): New function to get a
	masked internal_fn for a reduction ifn.
	(vectorize_fold_left_reduction): Add support for masking reductions.

2019-06-18  Kewen Lin  <linkw@gcc.gnu.org>

	PR middle-end/80791
	* target.def (predict_doloop_p): New hook.
	* targhooks.h (default_predict_doloop_p): New declaration.
	* targhooks.c (default_predict_doloop_p): New function.
	* doc/tm.texi.in (TARGET_PREDICT_DOLOOP_P): New hook.
	* doc/tm.texi: Regenerate.
	* config/rs6000/rs6000.c (rs6000_predict_doloop_p): New function.
	(TARGET_PREDICT_DOLOOP_P): New macro.
	* tree-ssa-loop-ivopts.c (generic_predict_doloop_p): New function.

2019-06-17  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (struct omp_context): Add scan_inclusive field.
	(scan_omp_1_stmt) <case GIMPLE_OMP_SCAN>: Set ctx->scan_inclusive
	if inclusive scan.
	(struct omplow_simd_context): Add lastlane member.
	(lower_rec_simd_input_clauses): Add rvar argument, handle inscan
	reductions.  Build 2 or 3 argument .GOMP_SIMD_LANE calls rather than
	1 or 2 argument.
	(lower_rec_input_clauses): Handle inscan reductions in simd contexts.
	(lower_lastprivate_clauses): Set TREE_THIS_NOTRAP on the ARRAY_REF.
	(lower_omp_scan): New function.
	(lower_omp_1) <case GIMPLE_OMP_SCAN>: Use lower_omp_scan.
	* tree-ssa-dce.c (eliminate_unnecessary_stmts): For IFN_GOMP_SIMD_LANE
	check 3rd argument if present rather than 2nd.
	* tree-vectorizer.h (struct _loop_vec_info): Add scan_map member.
	(struct _stmt_vec_info): Change simd_lane_access_p from bool into
	2-bit bitfield.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	scan_map.  For IFN_GOMP_SIMD_LANE check 3rd argument if present rather
	than 2nd.
	(_loop_vec_info::~_loop_vec_info): Delete scan_map.
	* tree-vect-data-refs.c (vect_analyze_data_ref_accesses): Allow two
	different STMT_VINFO_SIMD_LANE_ACCESS_P refs if they have the same
	init.
	(vect_find_stmt_data_reference): Encode in ->aux the 2nd
	IFN_GOMP_SIMD_LANE argument.
	(vect_analyze_data_refs): Set STMT_VINFO_SIMD_LANE_ACCESS_P from the
	encoded ->aux value.
	* tree-vect-stmts.c: Include attribs.h.
	(vectorizable_call): Adjust comment about IFN_GOMP_SIMD_LANE.
	(scan_operand_equal_p, check_scan_store, vectorizable_scan_store): New
	functions.
	(vectorizable_load): For STMT_VINFO_SIMD_LANE_ACCESS_P tests use != 0.
	(vectorizable_store): Handle STMT_VINFO_SIMD_LANE_ACCESS_P > 1.

2019-06-17  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/62055
	* config/i386/i386.md (*nabstf2_1): New insn pattern.
	(*nabs<mode>2_1): Ditto.
	(nabs sse-reg splitter): New splitter.
	* config/i386/sse.md (*nabs<mode>2): New insn_and_split pattern.

2019-06-17  Jan Hubicka  <hubicka@ucw.cz>

	PR bootstrap/90873.
	* tree-ssa-alias.c (indirect_ref_may_alias_decl_p): Fix
	TMR index check.

2019-06-17  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx-protos.h (gen_set_softstack_insn): Declare.
	* config/nvptx/nvptx.c (gen_set_softstack_insn): New function.
	* config/nvptx/nvptx.md (define_insn "set_softstack_insn"): Rename to
	...
	(define_insn "set_softstack_<mode>"): ... this.  Use P iterator on
	match_operand 0.
	(define_insn "omp_simt_enter_insn"): Rename to ...
	(define_insn "omp_simt_enter_<mode>"): ... this.  Use P iterator on
	match_operand 0, 1 and 2, as well as the unspec_volatile result.
	(define_expand "omp_simt_enter): Use gen_omp_simt_enter_di and
	gen_omp_simt_enter_si.
	(define_expand "omp_simt_exit"): New.
	(define_insn "omp_simt_exit"): Rename to ...
	(define_insn "omp_simt_exit_<mode>"): ... this.  Use P iterator on
	match_operand 0.

2019-06-17  Matthew Green  <mrg@eterna.com.au>
	    Maya Rashish  <coypu@sdf.org>

	* config.gcc (aarch64*-*-netbsd*): New target.
	* config/aarch64/aarch64-netbsd.h: New file.
	* config/aarch64/t-aarch64-netbsd: Likewise.

2019-06-17  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (aliasing_component_refs_p): Consider only
	the access path from base to first VIEW_CONVERT_EXPR or
	BIT_FIELD_REF.

2019-06-17  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (nonoverlapping_component_refs_p): Also truncate
	access path on BIT_FIELD_REFs.

2019-06-17  Martin Liska  <mliska@suse.cz>

	PR ipa/90874
	* ipa-utils.h (odr_type_p): Remove dead code.

2019-06-17  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* configure.ac (ld_vers) <*-*-solaris2*>: Remove support for
	alternative Solaris 11.4 format.
	* configure: Regenerate.

2019-06-17  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.md (define_insn "call_insn"): Rename to ...
	(define_insn "call_insn_<mode>"): ... this.  Use P iterator on
	match_operand 0.
	(define_insn "call_value_insn"): Rename to ...
	(define_insn "call_value_insn_<mode>"): this.  Use P iterator on
	match_operand 0.
	(define_insn "nvptx_red_partition"): Set unspec_volatile result mode to
	DI.

2019-06-16  John David Anglin  <danglin@gcc.gnu.org>

	PR middle-end/64242
	* config/pa/pa.md (nonlocal_goto): Restore frame pointer last.  Add
	frame clobbers and schedule block.
	(builtin_longjmp): Likewise.

2019-06-16  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.c (msp430_expand_helper): Setup arguments which
	describe how to perform MSPABI compliant 64-bit shift.
	* config/msp430/msp430.md (ashldi3): New define_expand.
	(ashrdi3): New define_expand.
	(lshrdi3): New define_expand.

2019-06-16  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* doc/sourcebuild.texi: Document new effective target keyword
	longlong64.

2019-06-16  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (indirect_ref_may_alias_decl_p,
	indirect_refs_may_alias_p): Revert accidental commits.

	* tree-ssa-alias.c (aliasing_component_refs_p): Watch for arrays
	at the end of structures.

2019-06-16  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (machopic_indirect_call_target): Use renamed
	darwin_picsymbol_stubs to decide on output.
	(darwin_override_options): Handle darwin_picsymbol_stubs.
	* config/darwin.h (MIN_LD64_OMIT_STUBS): New.
	(LD64_VERSION): Revise default.
	* config/darwin.opt: (mpic-symbol-stubs): New option.
	(darwin_picsymbol_stubs): New variable.
	* config/i386/darwin.h (TARGET_MACHO_BRANCH_ISLANDS):
	rename to TARGET_MACHO_PICSYM_STUBS.
	* config/i386/i386.c (output_pic_addr_const): Likewise.
	* config/i386/i386.h Likewise.
	* config/rs6000/darwin.h: Likewise.
	* config/rs6000/rs6000.c (rs6000_call_darwin_1): Use renamed
	darwin_picsymbol_stubs.

2019-06-16  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.opt (prebind, noprebind, seglinkedit,
	noseglinkedit): Add RejectNegative.

2019-06-16  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (nonoverlapping_component_refs_p): Fix pasto
	in my previous patch.

2019-06-16  Tom de Vries  <tdevries@suse.de>

	PR tree-optimization/89376
	* tree-parloops.c (oacc_entry_exit_ok_1): Handle red == NULL.

2019-06-15  Maya Rashish  <coypu@sdf.org>

	* doc/invoke.texi (Spec Files): Update location of the
	Fortran spec file.

2019-06-15  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/extend.texi (Common Function Attributes): Clarify
	no_sanitize.  Fix grammar.

2019-06-15  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (alias_stats): Add
	nonoverlapping_component_refs_p_may_alias,
	nonoverlapping_component_refs_p_no_alias,
	nonoverlapping_component_refs_of_decl_p_may_alias,
	nonoverlapping_component_refs_of_decl_p_no_alias.
	(dump_alias_stats): Dump them.
	(nonoverlapping_component_refs_of_decl_p): Add stats.
	(nonoverlapping_component_refs_p): Add stats; do not stop on first
	ARRAY_REF.

2019-06-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (and<mode>3): Generate zero-extends for
	TARGET_ZERO_EXTEND_WITH_AND && optimize_function_for_speed_p (cfun))
	only.
	(*anddi3_doubleword): Split before reload. Merge with
	anddi->zext pre-reload splitter.
	(*andndi3_doubleword): Split before reload.
	(*<code>di3_doubleword): Ditto.
	(*one_cmpldi2_doubleword): Ditto.

2019-06-15  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/90779
	* gimplify.c: Include omp-offload.h and context.h.
	(gimplify_bind_expr): Add "omp declare target" attributes
	to static block scope variables inside of target region or target
	functions.

2019-06-15  Tom de Vries  <tdevries@suse.de>

	PR tree-optimization/90009
	* tree-ssa-threadbackward.c (thread_jumps::profitable_jump_thread_path):
	Return NULL if bb contains IFN_UNIQUE.

2019-06-14  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (CCEITHER): New define_mode_iterator.
	(un): New define_mode_attr.
	(isel_signed_<mode>, isel_unsigned_<mode>): Delete, merge into ...
	(isel_<un>signed_<GPR:mode>): ... this.  New define_insn.
	(isel_reversed_signed_<mode>, isel_reversed_unsigned_<mode>): Delete,
	merge into ...
	(isel_reversed_<un>signed_<GPR:mode>): ... this.  New define_insn.

2019-06-14  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.opt: Add RejectNegative where needed, reorder
	and add minimal functional descriptions.

2019-06-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR rtl-optimization/90765
	* calls.c (update_stack_alignment_for_call): New function.
	(expand_call): Call update_stack_alignment_for_call when
	outgoing parameter is passed in the stack.
	(emit_library_call_value_1): Likewise.
	* function.c (locate_and_pad_parm): Don't update
	stack_alignment_needed and preferred_stack_boundary.

2019-06-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/90877
	* config/i386/i386-features.c
	(dimode_scalar_chain::compute_convert_gain): Replace
	mmxsse_to_integer with sse_to_integer.
	* config/i386/i386.c (ix86_register_move_cost): Verify that
	moves between MMX and non-MMX units require secondary memory.
	Correct costs of moves between SSE and integer units.
	* config/i386/i386.h (processor_costs): Rename cost of moving
	SSE register to integer to sse_to_integer.  Rename cost of

2019-06-14  Matt Thomas  <matt@3am-software.com>
	    Matthew Green  <mrg@eterna.com.au>
	    Nick Hudson  <skrll@netbsd.org>
	    Maya Rashish  <coypu@sdf.org>
	    Richard Earnshaw  <rearnsha@arm.com>

	* config.gcc (arm*-*-netbsdelf*) Add support for EABI configuration.
	* config.host (arm*-*-netbsd*): Use driver-arm.o on native NetBSD.
	* config/arm/netbsd-eabi.h: New file.
	* config/arm/netbsd-elf.h (TARGET_OS_CPP_BUILTINS): Undefine before
	redefining.
	(SUBTARGET_EXTRA_ASM_SPEC): Don't pass -matpcs to the assembler.
	* config/netbsd-elf.h (NETBSD_LINK_LD_ELF_SO_SPEC): New define.
	(NETBSD_SUBTARGET_EXTRA_SPECS): New define.
	(SUBTARGET_EXTRA_SPECS): Define to NETBSD_SUBTARGET_EXTRA_SPECS.

2019-06-14  Richard Biener  <rguenther@suse.de>

	* tree-loop-distribution.c (classify_partition): Return
	whether a reduction appeared in all partitions and do not
	stop builtin detection because of this.
	(distribute_loop): Sort a non-builtin partition last if
	there's a reduction in all partitions and make sure the
	partition prevailing as last is not a builtin.

2019-06-14  Feng Xue  <fxue@os.amperecomputing.com>

	PR ipa/90401
	* ipa-prop.c (add_to_agg_contents_list): New function.
	(clobber_by_agg_contents_list_p): Likewise.
	(extract_mem_content): Likewise.
	(get_place_in_agg_contents_list): Delete.
	(determine_known_aggregate_parts): Renamed from
	determine_locally_known_aggregate_parts.  New parameter
	aa_walk_budget_p.

2019-06-13  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/90662
	* tree-ssa-strlen.c (get_stridx): Convert fold_build2 operands
	to the same type.

2019-06-13  Jan Hubicka  <hubicka@ucw.cz>

	PR bootstrap/90873
	* tree-ssa-alias.c (indirect_ref_may_alias_decl_p): Also check that
	dbase is not TARGET_MEM_REF.

2019-06-13  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (SWIM1248s): Rename from SWIM1248x.
	Update all uses.
	(and<mode>3): Use gen_extend_insn instead of indirect functions.
	Do not generate DImode extends for 32bit targets.
	(and->zext post-reload splitter): Use gen_extend_insn
	instead of indirect functions.
	(anddi->zext pre-reload splitter): New.
	(*zext<mode>_doubleword_and): Remove.
	(*zext<mode>_doubleword): Ditto.
	(*zextsi_doubleword): Dittto.

2019-06-13  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-expand.c (ix86_expand_int_sse_cmp):
	Use gen_sub3_insn instead of indirect function.
	(ix86_expand_ashl_const): Use gen_add2_insn instead of
	indirect function.
	(ix86_adjust_counter): Ditto.

2019-06-13  Jiufu Guo  <guojiufu@linux.ibm.com>
	    Lijia He  <helijia@linux.ibm.com>

	PR tree-optimization/77820
	* tree-ssa-threadedge.c
	(edge_forwards_cmp_to_conditional_jump_through_empty_bb_p): New
	function.
	(thread_across_edge): Add call to
	edge_forwards_cmp_to_conditional_jump_through_empty_bb_p.

2019-06-13  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-driver.c (validate_macosx_version_min): New.
	(darwin_default_min_version): Cleanup and validate supplied version.
	(darwin_driver_init): Likewise and push cleaned version into opts.

2019-06-13  Jan Hubicka  <hubicka@ucw.cz>

	PR tree-optimization/90869
	* tree-ssa-alias.c (indirect_ref_may_alias_decl_p): Watch for view
	converts in MEM_REF referencing decl rather than view converts
	from decl type to MEM_REF type.

2019-06-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90856
	* tree-sra.c (build_ref_for_model): Only use
	build_reconstructed_reference when address-spaces are the same.

2019-06-13  Jakub Jelinek  <jakub@redhat.com>

	* config/nvptx/nvptx.c (nvptx_sese_number, nvptx_sese_pseudo): Don't
	wrap ei variable name in the declaration in ()s.
	(nvptx_single): Actually use mode_label variable.  Formatting fix.

2019-06-13  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (vect_loop_vectorized_call): Declare.
	* tree-vectorizer.c (vect_loop_vectorized_call): Export and
	also return the condition stmt.
	* tree-vect-loop-manip.c (vect_loop_versioning): Compute outermost
	loop we can version and version that, reusing the loop version
	created by if-conversion instead of versioning again.

2019-06-13  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-loop-versioning.cc (prune_loop_conditions): Use
	may_contain_p.
	* tree-vrp (value_range_base::may_contain_p): Call into
	value_inside_range.
	(value_inside_range): Make private inside value_range_base class.
	Take min/max from *this.
	(range_includes_p): Remove.
	* tree-vrp.h (value_range_base): Add value_inside_range.
	(range_includes_p): Remove.
	(range_includes_zero_p): Call may_contain_p.
	* vr-values.c (compare_range_with_value): Same.

2019-06-13  Claudiu Zissulescu  <claziss@synopsys.com>

	* doc/extend.texi (ARC Function Attributes): Update info.

2019-06-13  Feng Xue  <fxue@os.amperecomputing.com>

	PR tree-optimization/89713
	* doc/invoke.texi (-ffinite-loops): Document new option.
	* common.opt (-ffinite-loops): New option.
	* tree-ssa-dce.c (mark_stmt_if_obviously_necessary): Mark
	IFN_GOACC_LOOP calls as necessary.
	* tree-ssa-loop-niter.c (finite_loop_p): Assume loop with an exit
	is finite.
	* omp-offload.c (oacc_xform_loop): Skip lowering if return value of
	IFN_GOACC_LOOP call is not used.
	* opts.c (default_options_table): Enable -ffinite-loops at -O2+.

2019-06-13  Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	PR target/88838
	* tree-vect-loop-manip.c (vect_set_loop_masks_directly): If the
	compare_type is not with Pmode size, we will create an IV with
	Pmode size with truncated use (i.e. converted to the correct type).
	* tree-vect-loop.c (vect_verify_full_masking): Find IV type.
	(vect_iv_limit_for_full_masking): New. Factored out of
	vect_set_loop_condition_masked.
	* tree-vectorizer.h (LOOP_VINFO_MASK_IV_TYPE): New.
	(vect_iv_limit_for_full_masking): Declare.

2019-06-13  Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	PR target/88834
	* tree-ssa-loop-ivopts.c (get_mem_type_for_internal_fn): Handle
	IFN_MASK_LOAD_LANES and IFN_MASK_STORE_LANES.
	(get_alias_ptr_type_for_ptr_address): Likewise.
	(add_iv_candidate_for_use): Add scaled index candidate if useful.
	* tree-ssa-address.c (preferred_mem_scale_factor): New.
	* config/aarch64/aarch64.c (aarch64_classify_address): Relax
	allow_reg_index_p.

2019-06-13  Kugan Vivekanandarajah  <kugan.vivekanandarajah@linaro.org>

	* config/aarch64/iterators.md (ADDSUB): Fix typo in comment.

2019-06-12  Dimitar Dimitrov  <dimitar@dinux.eu>

	* common/config/pru/pru-common.c: New file.
	* config.gcc: Add PRU target.
	* config/pru/alu-zext.md: New file.
	* config/pru/constraints.md: New file.
	* config/pru/predicates.md: New file.
	* config/pru/pru-opts.h: New file.
	* config/pru/pru-passes.c: New file.
	* config/pru/pru-pragma.c: New file.
	* config/pru/pru-protos.h: New file.
	* config/pru/pru.c: New file.
	* config/pru/pru.h: New file.
	* config/pru/pru.md: New file.
	* config/pru/pru.opt: New file.
	* config/pru/t-pru: New file.
	* doc/extend.texi: Document PRU pragmas.
	* doc/invoke.texi: Document PRU-specific options.
	* doc/md.texi: Document PRU asm constraints.

2019-06-12  Martin Sebor  <msebor@redhat.com>

	PR middle-end/90676
	* tree-pretty-print.c (dump_mem_ref): New function.  Include
	MEM_REF type in output when different size than operand.
	(dump_generic_node): Move code to dump_mem_ref and call it.

2019-06-12  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/90662
	* tree-ssa-strlen.c (get_stridx): Handle simple VLAs and pointers
	to arrays.

2019-06-12  Tom de Vries  <tdevries@suse.de>

	PR tree-optimization/90009
	* config/nvptx/nvptx.c (nvptx_find_par): Assert fork has at most join.

2019-06-12  Martin Liska  <mliska@suse.cz>

	* ggc-common.c (ggc_prune_overhead_list): Do not sanitize
	the created map.
	* hash-map.h: Add sanitize_eq_and_hash into ::hash_map.
	* mem-stats.h (mem_alloc_description::mem_alloc_description):
	Do not sanitize created maps.

2019-06-12  Aldy Hernandez  <aldyh@redhat.com>

	* gimple-ssa-evrp.c (evrp_dom_walker::before_dom_children): Use
	value_range::singleton_p.
	* tree-vrp.c (value_range_constant_singleton): Remove.
	* tree-vrp.h (value_range_constant_singleton): Remove.
	* vr-values.c (vr_values::singleton): Use
	value_range::singleton_p.

2019-06-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/90811
	* cfgexpand.c (align_local_variable): Add really_expand argument,
	don't SET_DECL_ALIGN if it is false.
	(add_stack_var): Add really_expand argument, pass it through to
	align_local_variable.
	(expand_one_stack_var_1): Pass true as really_expand to
	align_local_variable.
	(expand_one_ssa_partition): Pass true as really_expand to
	add_stack_var.
	(expand_one_var): Pass really_expand through to add_stack_var.

2019-06-12  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	* config/arm/iterators.md (VABAL): New int iterator.
	* config/arm/neon.md (<sup>sadv16qi): New define_expand.
	* config/arm/unspecs.md ("unspec"): Define UNSPEC_VABAL_S,
	UNSPEC_VABAL_U values.

2019-06-12  Martin Liska  <mliska@suse.cz>

	* value-prof.c (stream_out_histogram_value): Only first value
	can't be negative.

2019-06-12  Jakub Jelinek  <jakub@redhat.com>

	PR c/90760
	* symtab.c (symtab_node::set_section): Allow being called on aliases
	as long as they aren't analyzed yet.

2019-06-11  Faraz Shahbazker  <fshahbazker@wavecomp.com>

	* config/mips/mips.c (mips_final_postscan_insn): Modify call
	to `mips_set_text_contents_type' to indicate whether a
	non-debug insn follows.

2019-06-11  Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000-cpus.def (ISA_FUTURE_MASKS_SERVER): Delete
	enabling -mpcrel by default.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Update
	test for -mpcrel and/or -mprefixed-addr needing -mcpu=future, so
	that the test against -mcpu=future is done first.  Then test if
	-mprefixed-addr is on for -mpcrel.
	(rs6000_disable_incompatible_switches): Add -mcpu=future support.

2019-06-11  Jakub Jelinek  <jakub@redhat.com>

	PR target/90811
	* config/nvptx/nvptx.c (nvptx_output_softstack_switch): Use and.b%d
	instead of and.u%d.

2019-06-11  Marc Glisse  <marc.glisse@inria.fr>

	* match.pd (X/[ex]4<Y/[ex]4): Handle conversions.

2019-06-11  Matthew Beliveau  <mbelivea@redhat.com>

	PR c++/90449 - add -Winaccessible-base option.
	* doc/invoke.texi (Winaccessible-base): Document.

2019-06-11  Marc Glisse  <marc.glisse@inria.fr>

	PR tree-optimization/62041
	* fold-const.c (fold_real_zero_addition_p): Handle vectors.

2019-06-11  Jason Merrill  <jason@redhat.com>

	* gdbhooks.py (TreePrinter.to_string): Recognize ggc_free'd memory.
	* tree.c (get_tree_code_name): Likewise.
	* print-tree.c (print_node): Only briefly print a node with an
	invalid code.

2019-06-11  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/90819
	* trans-mem.c (tm_memopt_compute_available): Add assertion
	that blocks is not empty.  Formatting fix.

2019-06-11  Martin Liska  <mliska@suse.cz>

	PR c++/87847
	* hash-table.h: Extend create_gcc, add one parameter
	that is passed into hash_table::hash_table.

2019-06-10  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-protos.h (ix86_split_fp_absneg_operator):
	New prototype.
	* config/i386/i386-expand.c (ix86_expand_fp_absneg_operator):
	Emit clobber also for non-sse operations.
	(ix86_split_fp_absneg_operator): New function.
	* config/i386/i386.md (SSEMODEF): New mode iterator.
	(ssevecmodef): New mode attribute.
	(<code>tf2): Use absneg code iterator.
	(*<code>tf2_1): Rename from *absnegtf3_sse. Use absneg code iterator.
	Add three-operand AVX alternatives.
	(*<code><mode>2_i387_1): Rename from *absnegxf2_i387.
	Use absneg code iterator and X87MODEF mode iterator.
	(absneg fp_reg non-sse splitter): Call absneg code iterator
	and X87MODEF mode iterator.
	(absneg general_reg non-sse splitter): Use absneg code iterator
	and X87MODEF mode iterator.  Use ix86_split_fp_absneg_operator.
	(*<code><mode>2_1): Rename from *absneg<mode>2.  Use absneg
	code iterator.  Add three-operand AVX alternative.
	(absneg sse_reg splitter): Use absneg code iterator
	and SSEMODEF mode iterator.  Handle AVX operands.
	(absneg fp_reg splitter): Use absneg code iterator
	and MODEF mode iterator.
	(absneg general_reg splitter): Merge splitters using MODEF mode
	iterator.  Use absneg code iterator.  Call
	ix86_split_fp_absneg_operator.
	(*<code><mode>2_i387): Rename from *<code><mode>2_1.
	Do not enable for non-sse modes before reload.
	(CSGNMODE): Remove.
	(CSGNVMODE): Ditto.
	(copysing<mode>3): Use SSEMODEF instead of CSGNMODE and
	ssevecmodef mode attribute instaed of CSGNVMODE.
	(copysign<mode>3_const): Ditto.
	(copysign<mode>3_var): Ditto.
	* config/i386/i386.md (*<code><mode>2): Rename from *absneg<mode>2.
	Use absneg code iterator.  Simplify code using std::swap.
	* config/i386/predicates.md (absneg_operator): Remove.

2019-06-10  Martin Sebor  <msebor@redhat.com>

	* gimple-fold.c (get_range_strlen): Update comment that didn't
	make it into r267503 or related commits.

2019-06-10  Vladislav Ivanishin  <vlad@ispras.ru>

	* gcov-tool.c (merge_usage, rewrite_usage): Mark with
	ATTRIBUTE_NORETURN thus making consistent with overlap_usage.

2019-06-10  Jakub Jelinek  <jakub@redhat.com>

	* tree.def (OMP_SCAN): New tree code.
	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE_INCLUSIVE and
	OMP_CLAUSE_EXCLUSIVE.
	* tree.h (OMP_CLAUSES): Use OMP_SCAN instead of OMP_TASKGROUP.
	(OMP_SCAN_BODY, OMP_SCAN_CLAUSES): Define.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add entries for
	OMP_CLAUSE_{IN,EX}CLUSIVE.
	(walk_tree_1): Handle OMP_CLAUSE_{IN,EX}CLUSIVE.
	* tree-nested.c (convert_nonlocal_reference_stmt,
	convert_local_reference_stmt, convert_gimple_call): Handle
	GIMPLE_OMP_SCAN.
	* tree-pretty-print.c (dump_omp_clause): Handle
	OMP_CLAUSE_{IN,EX}CLUSIVE.
	(dump_generic_node): Handle OMP_SCAN.
	* gimple.def (GIMPLE_OMP_SCAN): New gimple code.
	* gimple.h (gomp_scan): New type.
	(is_a_helper <gomp_scan *>::test,
	is_a_helper <const gomp_scan *>::test): New templates.
	(gimple_build_omp_scan): Declare.
	(gimple_omp_scan_clauses, gimple_omp_scan_clauses_ptr,
	gimple_omp_scan_set_clauses): New inline functions.
	(CASE_GIMPLE_OMP): Add case GIMPLE_OMP_SCAN:.
	* gimple.c (gimple_build_omp_scan): New function.
	(gimple_copy): Handle GIMPLE_OMP_SCAN.
	* gimple-walk.c (walk_gimple_op, walk_gimple_stmt): Likewise.
	* gimple-pretty-print.c (dump_gimple_omp_block): Don't handle
	GIMPLE_OMP_TASKGROUP.
	(dump_gimple_omp_scan): New function.
	(pp_gimple_stmt_1): Handle GIMPLE_OMP_SCAN.
	* gimple-low.c (lower_stmt): Handle GIMPLE_OMP_SCAN.
	* tree-inline.c (remap_gimple_stmt, estimate_num_insns): Likewise.
	* gimplify.c (enum gimplify_omp_var_data): Add GOVD_REDUCTION_INSCAN.
	(is_gimple_stmt): Handle OMP_SCAN.
	(gimplify_scan_omp_clauses): Reject inscan reductions on constructs
	other than OMP_FOR or OMP_SIMD.  Handle OMP_CLAUSE_{IN,EX}CLUSIVE.
	(gimplify_adjust_omp_clauses): Diagnose inscan reductions not
	mentioned in nested #pragma omp scan.  Handle
	OMP_CLAUSE_{IN,EX}CLUSIVE.
	(gimplify_expr): Handle OMP_SCAN.
	* omp-low.c (check_omp_nesting_restrictions): For parent context,
	look through GIMPLE_OMP_SCAN context.  Allow #pragma omp scan in
	simd constructs.
	(scan_omp_1_stmt, lower_omp_1, diagnose_sb_1, diagnose_sb_2): Handle
	GIMPLE_OMP_SCAN.

2019-06-10  Martin Liska  <mliska@suse.cz>

	* ipa-cp.c (ignore_edge_p): New function.
	(build_toporder_info): Use it.
	* ipa-inline.c (ignore_edge_p): New function.
	(inline_small_functions): Use it.
	* ipa-pure-const.c (ignore_edge_for_nothrow):
	Verify opt_for_fn for caller and callee.
	(ignore_edge_for_pure_const): Likewise.
	* ipa-reference.c (ignore_edge_p): Extend to check
	for opt_for_fn.
	* ipa-utils.c (searchc): Refactor.
	* ipa-utils.h: Fix coding style.

2019-06-10  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_rtx_costs): Update costs.

2019-06-10  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (arc_check_ior_const): Declare.
	(arc_split_ior): Likewise.
	(arc_check_mov_const): Likewise.
	(arc_split_mov_const): Likewise.
	* config/arc/arc.c (arc_print_operand): Fix 'z' letter.
	(arc_rtx_costs): Replace check Crr with Cax constraint.
	(prepare_move_operands): Cleanup, remove unused code.
	(arc_split_ior): New function.
	(arc_check_ior_const): Likewise.
	(arc_split_mov_const): Likewise.
	(arc_check_mov_const): Likewise.
	* config/arc/arc.md (movsi_insn): Restructure it, and convert it
	in define_insn_and_split pattern.
	(iorsi3): Likewise.
	(mulsi3_v2): Add new matching variant.
	(andsi3_i): Cleanup pattern.
	(rotrsi3_cnt1): Update pattern.
	(rotrsi3_cnt8): New pattern.
	(ashlsi2_cnt8): Likewise.
	(ashlsi2_cnt16): Likewise.
	* config/arc/constraints.md (C0p): Update constraint.
	(Crr): Remove it.
	(C0x): New pattern.
	(Cax): New pattern.

2019-06-10  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sem_item_optimizer::parse_nonsingleton_classes):
	Update coding style.
	(sem_item_optimizer::dump_cong_classes):
	Print how many items are in a non-singular class.  Improve
	coding style.

2019-06-10  Martin Liska  <mliska@suse.cz>

	* value-prof.c (dump_histogram_value): Change dump format.
	(gimple_mod_subtract_transform): Remove legacy comment.

2019-06-10  Martin Liska  <mliska@suse.cz>

	* value-prof.c (dump_histogram_value): Print histogram values
	only if present.

2019-06-10  Martin Liska  <mliska@suse.cz>

	* gcov-io.h (GCOV_DISK_SINGLE_VALUES): New.
	(GCOV_SINGLE_VALUE_COUNTERS): Likewise.
	* ipa-profile.c (ipa_profile_generate_summary):
	Use get_most_common_single_value.
	* tree-profile.c (gimple_init_gcov_profiler):
	Instrument with __gcov_one_value_profiler_v2
	and __gcov_indirect_call_profiler_v4.
	* value-prof.c (dump_histogram_value):
	Print all values for HIST_TYPE_SINGLE_VALUE.
	(stream_out_histogram_value): Update assert for
	N values.
	(stream_in_histogram_value): Set number of
	counters for HIST_TYPE_SINGLE_VALUE.
	(get_most_common_single_value): New.
	(gimple_divmod_fixed_value_transform):
	Use get_most_common_single_value.
	(gimple_ic_transform): Likewise.
	(gimple_stringops_transform): Likewise.
	(gimple_find_values_to_profile): Set number
	of counters for HIST_TYPE_SINGLE_VALUE.
	* value-prof.h (get_most_common_single_value): New.

2019-06-10  Martin Liska  <mliska@suse.cz>

	* hash-map.h: Pass default value to hash_table ctor.
	* hash-table.h: Add default value to call of a ctor.

2019-06-08  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (C Dialect Options): Minor grammatical change.
	(x86 Options): Replace all uses of "PCL_MUL" with "PCLMUL"

2019-06-07  John David Anglin  <danglin@gcc.gnu.orig>

	PR target/90751
	* config/pa/pa-linux.h (ASM_DECLARE_FUNCTION_NAME): Update comment.
	Call pa_output_function_label.
	(TARGET_ASM_FUNCTION_PROLOGUE): define.
	* config/pa/pa-protos.h (pa_output_function_label): Declare.
	* config/pa/pa.c (pa_output_function_prologue): Add ATTRIBUTE_UNUSED
	to declaration.
	(pa_linux_output_function_prologue): Declare.
	(TARGET_ASM_FUNCTION_PROLOGUE): Delete define.
	(pa_output_function_label): New.
	(pa_output_function_prologue): Revise to use pa_output_function_label.
	(pa_linux_output_function_prologue): New.
	* config/pa/pa.h (TARGET_ASM_FUNCTION_PROLOGUE): Define.

2019-06-07  Aldy Hernandez  <aldyh@redhat.com>

	* tree-vrp.h (value_range_base::intersect): New.
	(value_range::intersect_helper): Move from here...
	(value_range_base::intersect_helper): ...to here.
	* tree-vrp.c (value_range::intersect_helper): Rename to...
	(value_range_base::intersect_helper): ...this, and rewrite to
	return a value instead of modifying THIS in place.
	Also, move equivalence handling...
	(value_range::intersect): ...here, while calling intersect_helper.
	* gimple-fold.c (size_must_be_zero_p): Use value_range_base when
	calling intersect.
	* gimple-ssa-evrp-analyze.c (ecord_ranges_from_incoming_edge):
	Same.
	* vr-values.c (vrp_evaluate_conditional_warnv_with_ops): Same.

2019-06-07  Jakub Jelinek  <jakub@redhat.com>

	* Makefile.in (genprogerr): Add condmd.
	(genprog): Remove it here.

2019-06-07  Andrew Stubbs  <ams@codesourcery.com>

	* doc/invoke.texi (AMD GCN Options): Add gfx906.

2019-06-07  Richard Biener  <rguenther@suse.de>

	PR debug/90574
	* tree-cfg.c (stmt_starts_bb_p): Split blocks at labels
	that appear after user labels.

2019-06-07  Martin Liska  <mliska@suse.cz>

	* cselib.c (cselib_init): Disable hash table
	sanitization.
	* hash-set.h: Pass new default argument to m_table.
	* hash-table.c: Add global variable with hash table
	sanitization limit.
	* hash-table.h (Allocator>::hash_table): Add new argument
	to ctor.
	(hashtab_chk_error): New.
	* params.def (PARAM_HASH_TABLE_VERIFICATION_LIMIT): New.
	* toplev.c (process_options): Set hash_table_sanitize_eq_limit
	from the PARAM_HASH_TABLE_VERIFICATION_LIMIT value.

2019-06-07  Jan Hubicka  <hubicka@ucw.cz>

	* common.opt (flto-odr-type-merging): Ignore.
	* invoke.texi (-flto-odr-type-merging): Remove.
	* ipa-devirt.c (odr_vtable_hasher:odr_name_hasher): Remove.
	(can_be_vtable_hashed_p): Remove.
	(hash_odr_vtable): Remove.
	(odr_vtable_hasher::hash): Remove.
	(types_same_for_odr): Remove.
	(types_odr_comparable): Remove.
	(odr_vtable_hasher::equal): Remove.
	(odr_vtable_hash_type, odr_vtable_hash): Remove.
	(add_type_duplicate): Do not synchronize vtable and name hashtables.
	(get_odr_type): Do not use vtable hash.
	(dump_odr_type): Remove commented out code.
	(build_type_inheritance_graph): Do not allocate vtable hash.
	(rebuild_type_inheritance_graph): Do not delete vtable hash.
	* ipa-utils.h (type_with_linkage_p): Drop vtable hash path.
	(odr_type_p): Likewise.
	* tree.c (need_assembler_name_p): Remove flag_lto_odr_type_mering
	test.

2019-06-07  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (aliasing_component_refs_p): Do not give up
	immediately after same_types_for_tbaa_p returns -1 and continue
	looking for possible exact match; if matching types are arrays
	watch for partial overlaps.
	(indirect_ref_may_alias_decl_p): Watch for partial array overlaps.
	(indirect_refs_may_alias_p): Do type based disambiguation first;
	update comment.

2019-06-07  Richard Sandiford  <richard.sandiford@arm.com>

	* fwprop.c (propagate_rtx): Fix call to paradoxical_subreg_p.

2019-06-07  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Remove param.
	* gcov-counter.def (GCOV_COUNTER_ICALL_TOPNV):
	Remove.
	* gcov-io.h (GCOV_ICALL_TOPN_VAL): Likewise.
	(GCOV_ICALL_TOPN_NCOUNTS): Likewise.
	* params.def (PARAM_INDIR_CALL_TOPN_PROFILE): Likewise.
	* profile.c (instrument_values): Remove
	HIST_TYPE_INDIR_CALL_TOPN.
	* tree-profile.c (init_ic_make_global_vars):
	Always build __gcov_indirect_call only.
	(gimple_init_gcov_profiler): Remove usage
	of PARAM_INDIR_CALL_TOPN_PROFILE.
	(gimple_gen_ic_profiler): Likewise.
	* value-prof.c (dump_histogram_value): Likewise.
	(stream_in_histogram_value): Likewise.
	(gimple_indirect_call_to_profile): Likewise.
	(gimple_find_values_to_profile): Likewise.
	* value-prof.h (enum hist_type): Likewise.

2019-06-07  Martin Liska  <mliska@suse.cz>

	* tree-ssa-loop.c (get_lsm_tmp_name): Return at the end of the
	function.

2019-06-07  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/78902
	* builtin-attrs.def (ATTR_WARN_UNUSED_RESULT): New.
	(ATTR_MALLOC_NOTHROW_LEAF_LIST): Remove.
	(ATTR_WARN_UNUSED_RESULT_NOTHROW_LEAF_LIST): New.
	(ATTR_MALLOC_WARN_UNUSED_RESULT_NOTHROW_LEAF_LIST): New.
	(ATTR_ALLOC_SIZE_2_NOTHROW_LIST): Remove.
	(ATTR_MALLOC_SIZE_1_NOTHROW_LEAF_LIST): Remove.
	(ATTR_MALLOC_WARN_UNUSED_RESULT_NOTHROW_LIST): New.
	(ATTR_ALLOC_WARN_UNUSED_RESULT_SIZE_2_NOTHROW_LIST): New.
	(ATTR_MALLOC_WARN_UNUSED_RESULT_SIZE_1_NOTHROW_LEAF_LIST): New.
	(ATTR_ALLOCA_SIZE_1_NOTHROW_LEAF_LIST): Remove.
	(ATTR_ALLOCA_WARN_UNUSED_RESULT_SIZE_1_NOTHROW_LEAF_LIST): New.
	(ATTR_MALLOC_SIZE_1_2_NOTHROW_LEAF_LIST): Remove.
	(ATTR_MALLOC_WARN_UNUSED_RESULT_SIZE_1_2_NOTHROW_LEAF_LIST):
	New.
	(ATTR_ALLOC_SIZE_2_NOTHROW_LEAF_LIST): Remove.
	(ATTR_ALLOC_WARN_UNUSED_RESULT_SIZE_2_NOTHROW_LEAF_LIST): New.
	(ATTR_MALLOC_NOTHROW_NONNULL): Remove.
	(ATTR_WARN_UNUSED_RESULT_NOTHROW_NONNULL): New.
	(ATTR_MALLOC_WARN_UNUSED_RESULT_NOTHROW_NONNULL): New.
	(ATTR_MALLOC_NOTHROW_NONNULL_LEAF): Remove.
	(ATTR_WARN_UNUSED_RESULT_NOTHROW_NONNULL_LEAF): New.
	(ATTR_MALLOC_WARN_UNUSED_RESULT_NOTHROW_NONNULL_LEAF): New.
	* builtins.def (BUILT_IN_ALIGNED_ALLOC): Change to use
	warn_unused_result attribute.
	(BUILT_IN_STRDUP): Likewise.
	(BUILT_IN_STRNDUP): Likewise.
	(BUILT_IN_ALLOCA): Likewise.
	(BUILT_IN_CALLOC): Likewise.
	(BUILT_IN_MALLOC): Likewise.
	(BUILT_IN_REALLOC): Likewise.

2019-06-06  Jim Wilson  <jimw@sifive.com>

	PR target/89955
	* config/riscv/riscv.h (STARTFILE_PREFIX_SPEC): Deleted.
	* config/riscv/freebsd.h (STARTFILE_PREFIX_SPEC): Added.
	* config/riscv/linux.h (STARTFILE_PREFIX_SPEC): Added.

2019-06-06  Martin Sebor  <msebor@redhat.com>

	* tree-ssa-strlen.c (adjust_related_strinfos): Avoid trailing article.
	(handle_builtin_malloc): Remove trailing spaces.
	(handle_builtin_memset): Same.
	(handle_builtin_memcmp): Same.
	(compute_string_length): Same.
	(determine_min_objsize): Same.
	(handle_builtin_string_cmp): Same.
	(handle_char_store): Same.  Break up excessively long line.

2019-06-06  Martin Jambor  <mjambor@suse.cz>

	* tree-sra.c (build_reconstructed_reference): Drop the alignment
	check.

2019-06-06  Martin Jambor  <mjambor@suse.cz>

	* tree-sra.c (struct access): New field grp_same_access_path.
	(dump_access): Dump it.
	(build_reconstructed_reference): New function.
	(build_ref_for_model): Use it if possible.
	(path_comparable_for_same_access): New function.
	(same_access_path_p): Likewise.
	(sort_and_splice_var_accesses): Set the new flag.
	(analyze_access_subtree): Likewise.
	(propagate_subaccesses_across_link): Propagate zero value of the new
	flag down the access tree.

2019-06-06  Andrew Stubbs  <ams@codesourcery.com>

	* config.gcc (amdgcn-*-*): Allow --with-arch=gfx906.
	* config/gcn/gcn.opt (gpu_type): Add gfx906.
	* config/gcn/t-gcn-hsa (MULTILIB_OPTIONS): Add gfx906 multilib.
	(MULTILIB_DIRNAMES): Rename gcn5 to gfx900.
	Add gfx906.

2019-06-06  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	PR tree-optimization/90332
	* config/aarch64/aarch64.c (aarch64_expand_vector_init):
	Handle VALS containing two vectors.
	* config/aarch64/aarch64-simd.md (*aarch64_combinez<mode>): Rename
	to...
	(@aarch64_combinez<mode>): ... This.
	(*aarch64_combinez_be<mode>): Rename to...
	(@aarch64_combinez_be<mode>): ... This.
	(vec_init<mode><Vhalf>): New define_expand.
	* config/aarch64/iterators.md (Vhalf): Handle V8HF.

2019-06-06  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.md (ashlhi3): Use the const_variant of shift
	library functions only when not optimizing for size.
	(ashlsi3): Likewise.
	(ashrhi3): Likewise.
	(ashrsi3): Likewise.
	(lshrhi3): Likewise.
	(lshrsi3): Likewise.

2019-06-06  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR rtl-optimization/88751
	* ira.c (ira): Use the number of the actually referenced registers
	when calculating the threshold.

2019-06-06  Jakub Jelinek  <jakub@redhat.com>

	* configure: Regenerate.

2019-06-06  Jozef Lawrynowicz  <jozef.l@mittosystems.com>

	* config/msp430/msp430.md (ashlhi3): Force shift src operand into a
	register if it is in memory, so the shift can be emulated with a rotate
	instruction.
	(ashrhi3): Likewise.
	(lshrhi3): Likewise.

2019-06-06  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/87954
	* match.pd: Simplify mult where both arguments are 0 or 1.

2019-06-06  Richard Biener  <rguenther@suse.de>

	* vr-values.c (vr_values::extract_range_from_ssa_name): Do not
	put equivalences on UNDEFINED ranges.
	* gimple-ssa-evrp.c (evrp_dom_walker::before_dom_children):
	Make sure to drop defs of stmts added during simplification
	to VARYING.

2019-06-06  Richard Biener  <rguenther@suse.de>

	* tree-ssa-structalias.c: Include tree-cfg.h.
	(make_heapvar): Do not make heap vars artificial.
	(find_func_aliases_for_builtin_call): Handle stack allocation
	functions.
	(find_func_aliases): Delay processing of simple enough returns
	in non-IPA mode.
	(set_uids_in_ptset): Adjust.
	(find_what_var_points_to): Likewise.
	(solve_constraints): Do not dump points-to sets here.
	(compute_points_to_sets): Post-process return statements,
	amending the escaped solution.  Dump points-to sets afterwards.
	(ipa_pta_execute): Dump points-to sets.

2019-06-06  Martin Liska  <mliska@suse.cz>

	PR web/87933
	* doc/install.texi: Fix HTML headers and
	titles for 'Installing GCC' pages.

2019-06-06  Martin Liska  <mliska@suse.cz>

	* ipa-icf-gimple.h (dump_message_1): Remove.
	(dump_message): Likewise.
	(return_false_with_message_1): Print also file.
	(return_false_with_msg): Likewise.
	(return_with_result): Likewise.
	(return_with_debug): Likewise.
	* ipa-icf.c (sem_function::equals_private): Remove call
	to dump_message.

2019-06-05  Hongtao Liu  <hongtao.liu@intel.com>

	* config/i386/sse.md (define_mode_suffix vecmemsuffix): New.
	(define_insn "avx512dq_fpclass<mode><mask_scalar_merge_name>"): Enable
	memory operand for it.
	(define_insn "avx512dq_vmfpclass<mode><mask_scalar_merge_name>"): Ditto.

2019-06-05  Martin Sebor  <msebor@redhat.com>

	* config/i386/i386-features.c (ix86_get_function_versions_dispatcher):
	Adjust quoting and hyphenation.
	* convert.c (convert_to_real_1): Same.
	* gcc.c (driver_wrong_lang_callback): Same.
	(driver::handle_unrecognized_options): Same.
	* gimple-ssa-nonnull-compare.c (do_warn_nonnull_compare): Same.
	* opts-common.c (cmdline_handle_error): Same.
	(read_cmdline_option): Same.
	* opts-global.c (complain_wrong_lang): Same.
	(print_ignored_options): Same.
	(handle_common_deferred_options): Same.
	* pretty-print.h: Same.
	* print-rtl.c (debug_bb_n_slim): Same.
	* sched-rgn.c (make_pass_sched_fusion): Same.
	* tree-cfg.c (verify_gimple_assign_unary): Same.
	(verify_gimple_label): Same.
	* tree-ssa-operands.c (verify_ssa_operands): Same.
	* varasm.c (do_assemble_alias): Same.
	(assemble_alias): Same.

2019-06-05  Richard Henderson  <rth@twiddle.net>

	* config/alpha/alpha.c (direct_return): Move down after
	struct machine_function definition; use saved frame_size;
	return bool.
	(struct machine_function): Add sa_mask, sa_size, frame_size.
	(alpha_sa_mask, alpha_sa_size, compute_frame_size): Merge into ...
	(alpha_compute_frame_layout): ... new function.
	(TARGET_COMPUTE_FRAME_LAYOUT): New.
	(alpha_initial_elimination_offset): Use saved sa_size.
	(alpha_vms_initial_elimination_offset): Likewise.
	(alpha_vms_can_eliminate): Remove alpha_sa_size call.
	(alpha_expand_prologue): Use saved frame data.  Merge integer
	and fp register save loops.
	(alpha_expand_epilogue): Likewise.
	(alpha_start_function): Use saved frame data.
	* config/alpha/alpha-protos.h (direct_return): Update.
	(alpha_sa_size): Remove.

2019-06-05  Eric Botcazou  <ebotcazou@adacore.com>

	* fold-const.c (extract_muldiv_1) <PLUS_EXPR>: Do not distribute a
	multiplication by a power-of-two value.
	(fold_plusminus_mult_expr): Use pow2p_hwi to spot a power-of-two value
	and turn the modulo operation into a masking operation.

2019-06-05  Jakub Jelinek  <jakub@redhat.com>

	PR debug/90733
	* var-tracking.c (vt_expand_loc_callback): Don't create raw subregs
	with VOIDmode inner operands.

2019-06-05  Richard Biener  <rguenther@suse.de>

	PR middle-end/90726
	* tree-ssa-loop-niter.c (expand_simple_operations): Do not
	turn an expression graph into a tree.

2019-06-05  Jakub Jelinek  <jakub@redhat.com>

	* omp-expand.c (struct omp_region): Add has_lastprivate_conditional
	member.
	(expand_parallel_call): If region->inner->has_lastprivate_conditional,
	treat it like explicit monotonic schedule modifier.
	(expand_omp_for): Initialize has_lastprivate_conditional.
	If fd.lastprivate_conditional != 0, treat it like explicit monotonic
	schedule modifier.

	* omp-low.c (lower_rec_input_clauses): For lastprivate conditional
	references, lookup in in hash map MEM_REF operand instead of the
	MEM_REF itself.
	(lower_omp_1): When looking for lastprivate conditional assignments,
	handle MEM_REFs with REFERENCE_TYPE operands.

	* omp-low.c (lower_rec_input_clauses): Force max_vf if is_simd and
	on privatization clauses OMP_CLAUSE_DECL is privatized by reference
	and references a VLA.  Handle references to non-VLAs if is_simd
	all privatization clauses like reductions.
	(lower_rec_input_clauses) <case do_private, case do_firstprivate>:
	If omp_is_reference, use always omp simd arrays and set
	DECL_VALUE_EXPR in that case, if lower_rec_simd_input_clauses
	fails, emit reference initialization.

2019-06-05  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/89803
	* config/i386/avx512dqintrin.h (_mm_mask_fpclass_ss_mask,
	_mm_mask_fpclass_sd_mask): New intrinsics.
	(_mm_fpclass_ss_mask, _mm_fpclass_sd_mask): Modified, use new builtins.
	* config/i386/i386-builtin.def
	(__builtin_ia32_fpclassss_mask, __builtin_ia32_fpclasssd_mask):
	New builtins.
	(__builtin_ia32_fpclassss, __builtin_ia32_fpclasssd): Deleted.
	* config/i386/i386-builtin-types.def (DEF_FUNCTION_TYPE (QI, V2DF, INT),
	DEF_FUNCTION_TYPE (QI, V4SF, INT)): Deleted.
	* config/i386/i386-expand.c (case QI_FTYPE_V4SF_INT,
	case QI_FTYPE_V2SF_INT): Ditto.
	* config/i386/sse.md
	(define_insn "avx512dq_vmfpclass<mode><mask_scalar_merge_name>):
	Extended to insnstructions with mask operands.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wp"):
	Delete.
	(define_register_constraint "wq"): Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wp and RS6000_CONSTRAINT_wq.
	* config/rs6000/vsx.md (define_mode_attr VSr3): Delete.
	(define_mode_attr VSa): Delete.
	(define_mode_attr VSisa): New.
	(rest of file): Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (define_attr "isa"): Add p9kf and p9tf.
	(define_attr "enabled"): Handle those new isa values.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/vsx.md (define_mode_attr VSr4): Delete.
	(define_mode_attr VSr5): Delete.
	(define_mode_attr VStype_sqrt): Delete.
	(define_mode_iterator VSX_SPDP): Delete.
	(define_mode_attr VS_spdp_res): Delete.
	(define_mode_attr VS_spdp_insn): Delete.
	(define_mode_attr VS_spdp_type): Delete.
	(*vsx_sqrt<mode>2): Adjust.
	(vsx_<VS_spdp_insn>): Delete, split to...
	(vsx_xscvdpsp): ... this.  New.  And...
	(vsx_xvcvspdp): ... this.  New.  And...
	(vsx_xvcvdpsp): ... this.  New.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (define_mode_attr sd): Add values for V4SF
	and V2DF.
	* config/rs6000/vsx.md (define_mode_attr VSs): Delete.
	(rest of file): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/vsx.md (vsx_<VS_spdp_insn>): Use wa instead of <VSa>.
	(vsx_extract_<mode>_var): Ditto.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/vsx.md: Replace all <VSa> that are used with VSX_TI
	with just "wa".

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "ww"):
	Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_ww.
	* config/rs6000/rs6000.md: Adjust.
	* config/rs6000/vsx.md: Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (SFDF, SFDF2): Adjust comments.
	(define_mode_attr sd): New.
	(define_mode_attr s): New.
	(define_mode_attr Ftrad): Delete.
	(define_mode_attr Fvsx): Delete.
	(define_mode_attr Fs): Delete.
	(rest of file): Use the new mode attributes.
	* config.rs6000/vsx.md: Use the new mode attributes.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/vsx.md: Replace all <VSa> that are used with VSX_W
	with just "wa".

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/vsx.md (define_mode_attr VSr2): Delete.
	(rest of file): Replace all <VSa>, <VSr>, <VSr2>, and <VSr3> that are
	used with VSX_B, VSX_D, or VSX_F, with just "wa".

2019-06-04  Bill Schmidt  <wschmidt@linux.ibm.com>

	PR target/78263
	* config/rs6000/altivec.h: Don't #define vector, pixel, bool for
	C++ with strict ANSI requirements.

2019-06-04  Marc Glisse  <marc.glisse@inria.fr>

	* tree-ssa-loop-niter.c (number_of_iterations_ne): Skip
	computations when step is 1.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wf"):
	Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wf.
	* config/rs6000/rs6000.md: Adjust.
	* config/rs6000/vsx.md: Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Andrew Pinski  <apinski@marvell.com>

	* config/aarch64/aarch64.c (aarch64_asan_shadow_offset):
	Fix ILP32 value.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wd"):
	Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wd.
	* config/rs6000/rs6000.md: Adjust.
	* config/rs6000/vsx.md: Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (define_mode_attr Fv2): Delete.
	(rest of file): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/vsx.md (define_mode_attr VS_64reg): Delete.
	(*vsx_extract_<P:mode>_<VSX_D:mode>_load): Adjust.
	(vsx_splat_<mode>_reg): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "ws"):
	Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_ws.
	* config/rs6000/rs6000.md: Adjust.
	* config/rs6000/vsx.md: Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wv"):
	Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wv.
	* config/rs6000/rs6000.md: Adjust.
	* config/rs6000/vsx.md: Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wi"):
	Delete.
	(define_register_constraint "wt"): Delete.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wi and RS6000_CONSTRAINT_wt.
	* config/rs6000/rs6000.md: Adjust.
	* config/rs6000/vsx.md: Adjust.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-04  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_asm_output_external): Remove
	const.
	* config/aarch64/aarch64.c (aarch64_asm_output_external): Call
	default_elf_asm_output_external.

2019-06-04  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (INCLUDE_LIST): Remove.
	(sem_item_optimizer::execute): Remove call to init_wpa.
	* ipa-icf.h (init_wpa): Remove.

2019-06-04  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (gimplify_scan_omp_clauses): Don't sorry_at on lastprivate
	conditional on combined for simd.
	* omp-low.c (struct omp_context): Add combined_into_simd_safelen0
	member.
	(lower_rec_input_clauses): For gimple_omp_for_combined_into_p max_vf 1
	constructs, don't remove lastprivate_conditional_map, but instead set
	ctx->combined_into_simd_safelen0 and adjust hash_map, so that it points
	to parent construct temporaries.
	(lower_lastprivate_clauses): Handle ctx->combined_into_simd_safelen0
	like !ctx->lastprivate_conditional_map.
	(lower_omp_1) <case GIMPLE_ASSIGN>: If up->combined_into_simd_safelen0,
	use up->outer context instead of up.
	* omp-expand.c (expand_omp_for_generic): Perform cond_var bump even if
	gimple_omp_for_combined_p.
	(expand_omp_for_static_nochunk): Likewise.
	(expand_omp_for_static_chunk): Add forgotten cond_var bump that was
	probably moved over into expand_omp_for_generic rather than being copied
	there.

2019-06-04  Martin Liska  <mliska@suse.cz>

	* value-prof.c (dump_histogram_value): Fix typo.
	(gimple_mod_subtract_transform): Likewise.

2019-06-04  Richard Biener  <rguenther@suse.de>

	PR middle-end/90726
	* tree-chrec.c (chrec_contains_symbols): Add to visited.
	(tree_contains_chrecs): Likewise.
	(chrec_contains_symbols_defined_in_loop): Move here and avoid
	exponential behaivor from ...
	* tree-scalar-evolution.c (chrec_contains_symbols_defined_in_loop):
	... here.
	(expression_expensive_p): Avoid exponential behavior and compute
	expanded size, rejecting any expansion.
	* tree-ssa-loop-ivopts.c (abnormal_ssa_name_p): Remove.
	(idx_contains_abnormal_ssa_name_p): Likewise.
	(contains_abnormal_ssa_name_p_1): New helper for walk_tree.
	(contains_abnormal_ssa_name_p): Simplify and use
	walk_tree_without_duplicates.

2019-06-04  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90738
	Revert
	2019-06-03  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (ao_ref_init_from_vn_reference): Get original
	full reference tree and record in ref->ref.
	(vn_reference_lookup_3): Pass in original ref to
	ao_ref_init_from_vn_reference.
	(vn_reference_lookup): Likewise.
	* tree-ssa-sccvn.h (ao_ref_init_from_vn_reference): Adjust prototype.
	* tree-ssa-alias.c (nonoverlapping_component_refs_of_decl_p):
	Handle non-decl bases in the original reference.

2019-06-04  Martin Liska  <mliska@suse.cz>

	* ipa-icf.c (sem_item_optimizer::add_item_to_class): Count
	number of references.
	(sem_item_optimizer::do_congruence_step):
	(sem_item_optimizer::worklist_push): Dump how references
	a class has.
	(sem_item_optimizer::worklist_pop): Use heap.
	(sem_item_optimizer::process_cong_reduction): Likewise.
	* ipa-icf.h: Use fibonacci_heap insteam of std::list.

2019-06-04  Martin Liska  <mliska@suse.cz>

	* ipa-icf.h (struct sem_usage_pair_hash): New.
	(sem_usage_pair_hash::hash): Likewise.
	(sem_usage_pair_hash::equal): Likewise.
	(struct sem_usage_hash): Likewise.
	* ipa-icf.c (sem_item::sem_item): Initialize
	referenced_by_count.
	(sem_item::add_reference): Register a reference
	in ref_map and not in target->usages.
	(sem_item::setup): Remove initialization of
	dead vectors.
	(sem_item::~sem_item): Remove usage of dead vectors.
	(sem_item::dump): Remove dump of references.
	(sem_item_optimizer::sem_item_optimizer): Initialize
	m_references.
	(sem_item_optimizer::read_section): Remove useless
	dump.
	(sem_item_optimizer::parse_funcs_and_vars): Likewise here.
	(sem_item_optimizer::build_graph): Pass m_references
	to ::add_reference.
	(sem_item_optimizer::verify_classes): Remove usage of dead
	vectors.
	(sem_item_optimizer::traverse_congruence_split): Return true
	when a class is split.
	(sem_item_optimizer::do_congruence_step_for_index): Use
	hash_map for look up of (sem_item *, index). That brings
	significant speed up.
	(sem_item_optimizer::do_congruence_step): Return true
	when a split is done.
	(congruence_class::is_class_used): Use referenced_by_count.

2019-06-04  Alan Modra  <amodra@gmail.com>

	PR target/90689
	* config/rs6000/rs6000.c (rs6000_call_aix): Correct r271753 merge
	error.

2019-06-03  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.h (MASK_MFPGPR): Delete.
	* config/rs6000/rs6000.c (direct_move_p): Adjust.
	(rs6000_secondary_reload_simple_move): Adjust.
	(rs6000_opt_masks): Neuter the "mfpgpr" option.
	* config/rs6000/rs6000-c.c (rs6000_target_modify_macros): Adjust.
	* config/rs6000/rs6000-cpus.def (ISA_2_5_MASKS_EMBEDDED): Adjust
	comment.
	(power6x): Adjust.
	* config/rs6000/rs6000.md (floatsi<mode>2_lfiwax): Adjust.
	(floatunssi<mode>2_lfiwzx): Adjust.
	(fix_trunc<mode>si2_stfiwx): Adjust.
	(fixuns_trunc<mode>si2_stfiwx): Adjust.
	* config/rs6000/rs6000.opt (mno-mfpgpr): New.
	(mfpgpr): Mark as deprecated.
	* doc/extend.texi (PowerPC Function Attributes): Delete mfpgpr.
	(Basic PowerPC Built-in Functions Available on ISA 2.05): Adjust.
	* doc/invoke.texi (RS/6000 and PowerPC Options): Delete -mmfpgpr.

2019-06-03  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wg"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wg.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md (*mov<mode>_softfloat32, *movdi_internal64):
	Delete "wg" alternatives.
	* doc/md.texi (Machine Constraints): Adjust.

2019-06-03  Alan Modra  <amodra@gmail.com>

	* bb-reorder.c (copy_bb_p): Don't overflow size calculation.
	(get_uncond_jump_length): Assert length less than INT_MAX and
	non-negative.

2019-06-03  Wilco Dijkstra  <wdijkstr@arm.com>

	PR middle-end/64242
	* builtins.c (expand_builtin_longjmp): Add frame clobbers and schedule
	block.
	(expand_builtin_nonlocal_goto): Likewise.

2019-06-03  Szabolcs Nagy  <szabolcs.nagy@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_asm_output_alias): Declare.
	(aarch64_asm_output_external): Declare.
	* config/aarch64/aarch64.c (aarch64_asm_output_variant_pcs): New.
	(aarch64_declare_function_name): Call aarch64_asm_output_variant_pcs.
	(aarch64_asm_output_alias): New.
	(aarch64_asm_output_external): New.
	* config/aarch64/aarch64.h (ASM_OUTPUT_DEF_FROM_DECLS): Define.
	(ASM_OUTPUT_EXTERNAL): Define.

2019-06-03  Aldy Hernandez  <aldyh@redhat.com>
	* tree-vrp.h (value_range_base::nonzero_p): New.
	(value_range_base::set_nonnull): Rename to...
	(value_range_base::set_nonzero): ...this.
	(value_range_base::set_null): Rename to...
	(value_range_base::set_zero): ...this.
	(value_range::set_nonnull): Remove.
	(value_range::set_null): Remove.
	* tree-vrp.c (range_is_null): Remove.
	(range_is_nonnull): Remove.
	(extract_range_from_binary_expr): Use value_range_base::*zero_p
	instead of range_is_*null.
	(extract_range_from_unary_expr): Same.
	(value_range_base::set_nonnull): Rename to...
	(value_range_base::set_nonzero): ...this.
	(value_range::set_nonnull): Remove.
	(value_range_base::set_null): Rename to...
	(value_range_base::set_zero): ...this.
	(value_range::set_null): Remove.
	(extract_range_from_binary_expr): Rename set_*null uses to
	set_*zero.
	(extract_range_from_unary_expr): Same.
	(union_helper): Same.
	* vr-values.c (get_value_range): Use set_*zero instead of
	set_*null.
	(vr_values::extract_range_from_binary_expr): Same.
	(vr_values::extract_range_basic): Same.

2019-06-03  Wilco Dijkstra  <wdijkstr@arm.com>

	PR driver/90684
	* opts.c (parse_and_check_align_values): Allow 4 alignment values.

2019-06-03  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/iterators.md (MAX_OPP): New code attr.
	* config/aarch64/aarch64-simd.md (*aarch64_<su>abd<mode>_3):
	Rename to...
	(aarch64_<su>abd<mode>_3): ... This.
	(<sur>sadv16qi): Add TARGET_DOTPROD expansion.

2019-06-03  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (ao_ref_init_from_vn_reference): Get original
	full reference tree and record in ref->ref.
	(vn_reference_lookup_3): Pass in original ref to
	ao_ref_init_from_vn_reference.
	(vn_reference_lookup): Likewise.
	* tree-ssa-sccvn.h (ao_ref_init_from_vn_reference): Adjust prototype.
	* tree-ssa-alias.c (nonoverlapping_component_refs_of_decl_p):
	Handle non-decl bases in the original reference.

2019-06-03  Martin Liska  <mliska@suse.cz>

	* doc/generic.texi: Remove Java Trees.

2019-06-03  Martin Liska  <mliska@suse.cz>

	* fold-const.c (operand_equal_p): Fix typo as compare_tree_int
	returns 0 when operands are equal.

2019-06-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90716
	* tree-loop-distribution.c (destroy_loop): Process blocks in
	correct order.

2019-06-03  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR target/88837
	* vector-builder.h (vector_builder::count_dups): New method.
	* config/aarch64/aarch64-protos.h (aarch64_expand_sve_vector_init):
	Declare prototype.
	* config/aarch64/aarch64/sve.md (aarch64_sve_rev64<mode>): Use @.
	(vec_init<mode><Vel>): New pattern.
	* config/aarch64/aarch64.c (emit_insr): New function.
	(aarch64_sve_expand_vector_init_handle_trailing_constants): Likewise.
	(aarch64_sve_expand_vector_init_insert_elems): Likewise.
	(aarch64_sve_expand_vector_init_handle_trailing_same_elem): Likewise.
	(aarch64_sve_expand_vector_init): Define two overloaded functions.

2019-06-03  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	PR tree-optimization/90681
	* internal-fn.c (mask_load_direct): Mark as non-vectorizable again.
	* tree-vect-slp.c (vect_build_slp_tree_1): Add masked loads as a
	special case for SLP, but fail on non-groupped loads.

2019-06-03  Martin Liska  <mliska@suse.cz>

	* cfg.c (debug): Use TDF_DETAILS for debug and
	print edge info only once.

2019-06-02  Thomas Koenig  <tkoenig@gcc.gnu.org>

	PR fortran/90539
	* predict.def (PRED_FORTRAN_CONTIGUOUS): New predictor.

2019-06-01  Martin Sebor  <msebor@redhat.com>

	PR middle-end/90694
	* tree-pretty-print.c (dump_generic_node): Add parentheses.

2019-05-31  Jan Hubicka  <jh@suse.cz>

	* alias.c: Include ipa-utils.h.
	(get_alias_set): Try to complete ODR type via ODR type hash lookup.
	* ipa-devirt.c (prevailing_odr_type): New.
	* ipa-utils.h (previaling_odr_type): Declare.

2019-05-31  H.J. Lu  <hongjiu.lu@intel.com>
	    Hongtao Liu  <hongtao.liu@intel.com>

	PR target/89355
	* config/i386/i386-features.c (rest_of_insert_endbranch): Remove
	NOTE_INSN_DELETED_LABEL check.

2019-05-31  Prachi Godbole  <prachi.godbole@imgtec.com>
	    Robert Suchanek  <robert.suchanek@mips.com>

	* config/mips/mips.c (mips_expand_builtin_insn): Swap the 1st
	and 3rd operands of the fmadd/fmsub/maddv builtin.

2019-05-31  Jakub Jelinek  <jakub@redhat.com>

	* tree.h (OMP_CLAUSE__CONDTEMP__ITER): Define.
	* gimplify.c (gimplify_scan_omp_clauses): Allow lastprivate conditional
	on OMP_SIMD if not nested inside of worksharing loop that also has
	lastprivate conditional clause for the same decl.
	(gimplify_omp_for): Add _condtemp_ clauses to OMP_SIMD if needed.
	* omp-low.c (scan_sharing_clauses): Handle OMP_CLAUSE__CONDTEMP_ also
	on simd.
	(lower_rec_input_clauses): Likewise.  Handle lastprivate conditional
	on simd construct.
	(lower_lastprivate_conditional_clauses): Handle lastprivate conditional
	on simd construct.
	(lower_lastprivate_clauses): Likewise.
	(lower_omp_sections): Call lower_lastprivate_conditional_clauses before
	calling lower_rec_input_clauses.
	(lower_omp_for): Likewise.
	(lower_omp_1): Use first rather than second OMP_CLAUSE__CONDTEMP_
	clause on simd construct.
	* omp-expand.c (expand_omp_simd): Initialize cond_var if
	OMP_CLAUSE__CONDTEMP_ clause is present.

	* omp-low.c (lower_rec_simd_input_clauses): Set TREE_THIS_NOTRAP on
	ivar and lvar.

2019-05-31  Xiong Hu Luo  <luoxhu@linux.ibm.com>

	PR c/43673
	* c-format.c (print_char_table, scanf_char_table): Replace BADLEN with
	TEX_D32, TEX_D64 or TEX_D128.

2019-05-31  Marc Glisse  <marc.glisse@inria.fr>

	* match.pd (~(vec?cst1:cst2)): New transformation.

2019-05-31  Marc Glisse  <marc.glisse@inria.fr>

	* match.pd (X/[ex]D<Y/[ex]D): Handle negative denominator.
	((size_t)(A /[ex] B) CMP C): New transformation.

2019-05-31  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/md.texi: Document define_insn_and_rewrite.
	* rtl.def (DEFINE_INSN_AND_REWRITE): New rtx code.
	* gensupport.c (queue_elem): Update comment.
	(replace_operands_with_dups): New function.
	(gen_rewrite_sequence): Likewise.
	(process_rtx): Handle DEFINE_INSN_AND_REWRITE.
	* read-rtl.c (apply_subst_iterator): Likewise.
	(add_condition_to_rtx, named_rtx_p): Likewise.
	(rtx_reader::read_rtx_operand): Likewise.
	* config/aarch64/aarch64-sve.md
	(while_ult<GPI:mode><PRED_ALL:mode>_cc): Rename to...
	(*while_ult<GPI:mode><PRED_ALL:mode>_cc): ...this and use
	define_insn_and_rewrite.
	(*cond_<optab><mode>_any): Turn into define_insn_and_rewrites.
	Remove separate define_split.

2019-05-31  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (type_has_components_p): New function.
	(aliasing_component_refs_p): Use it.

2019-05-31  Martin Liska  <mliska@suse.cz>

	* gdbhooks.py: Add const_tree to TreePrinter.

2019-05-31  Thomas De Schampheleire  <thomas.de_schampheleire@nokia.com>

	PR debug/86964
	* common.opt (feliminate-unused-debug-symbols): Enable by default.
	* doc/invoke.texi (Debugging Options): Document new default of
	-feliminate-unused-debug-symbols and remove restriction to 'stabs'.

2019-05-31  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/90671
	* tree-ssa-threadupdate.c (ssa_create_duplicates): If
	template_block used to be empty on the first call, don't use
	gsi_split_seq_after and gsi_insert_seq_after, but remember whole
	seq with bb_seq and set it with set_bb_seq.

2019-05-31  Iain Sandoe  <iain@sandoe.co.uk>

	* config/i386/darwin.h (ASM_OUTPUT_MAX_SKIP_ALIGN): New.

2019-05-30  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/predicates.md (pcrel_address): New define_predicate.
	(prefixed_mem_operand): Likewise.
	(non_prefixed_mem_operand): Likewise.
	* config/rs6000/rs6000-protos.h (rs6000_prefixed_address): New
	prototype.
	* config/rs6000/rs6000.c (print_operand_address): Handle
	PC-relative addresses.
	(mode_supports_prefixed_address_p): New function.
	(rs6000_prefixed_address): New function.
	* config/rs6000/rs6000.h (SYMBOL_FLAG_PCREL): New #define.
	(SYMBOL_REF_PCREL_P): Likewise.

2019-05-30  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (enum gimplify_omp_var_data): Add GOVD_CONDTEMP.
	(gimplify_adjust_omp_clauses_1): Handle GOVD_CONDTEMP.
	(gimplify_omp_for): If worksharing loop with lastprivate conditional
	is nested inside of parallel region, add _condtemp_ clause to both.
	* tree-nested.c (convert_nonlocal_omp_clauses,
	convert_local_omp_clauses): Ignore OMP_CLAUSE__CONDTEMP_ instead of
	assertion failure.
	* omp-general.h (struct omp_for_data): Add have_pointer_condtemp
	member.
	* omp-general.c (omp_extract_for_data): Compute it.
	* omp-low.c (scan_sharing_clauses): Handle OMP_CLAUSE__CONDTEMP_.
	(lower_rec_input_clauses): Likewise.
	(lower_lastprivate_conditional_clauses): If OMP_CLAUSE__CONDTEMP_
	clause is already present, just add one further one after it.
	(lower_lastprivate_clauses): Handle cond_ptr with array type.
	(lower_send_shared_vars): Clear _condtemp_ vars.
	(lower_omp_1) <case GIMPLE_ASSIGN>: Handle target data like critical
	or section or taskgroup.
	* omp-expand.c (determine_parallel_type): Disallow combining only if
	first OMP_CLAUSE__CONDTEMP_ has pointer type.  Disallow combining
	of parallel sections if OMP_CLAUSE__CONDTEMP_ is present.
	(expand_omp_for_generic, expand_omp_for_static_nochunk,
	expand_omp_for_static_chunk, expand_omp_for): Use
	fd->have_pointer_condtemp instead of fd->lastprivate_conditional to
	determine if a special set of API routines are needed and if condtemp
	needs to be initialized, while always initialize cond_var if
	fd->lastprivate_conditional is non-zero.

2019-05-30  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/constraints.md (eI): New constraint.
	* config/rs6000/predicates.md (cint34_operand): New predicate.
	* config/rs6000/rs6000.h (SIGNED_16BIT_OFFSET_P): New #define.
	(SIGNED_34BIT_OFFSET_P): Likewise.
	* doc/md.texi (eI): Document constraint.

2019-05-30  Sylvia Taylor  <sylvia.taylor@arm.com>

	* config/aarch64/aarch64-sve.md (*fabd<mode>3): New.

2019-05-30  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Michael Meissner  <meissner@linux.ibm.com>

	* rs6000-cpus.def (OTHER_FUSION_MASKS): New #define.
	(ISA_3_0_MASKS_SERVER): Mask off OTHER_FUSION_MASKS.
	(ISA_3_0_MASKS_IEEE): Remove OPTION_MASK_DIRECT_MOVE.
	(ISA_FUTURE_MASKS_SERVER): Add OPTION_MASK_PREFIXED_ADDR.
	(OTHER_FUTURE_MASKS): Likewise.
	(POWERPC_MASKS): Likewise.
	* rs6000.c (rs6000_option_override_internal): Error if -mpcrel is
	specified without -mprefixed-addr or -mcpu=future.  Error if
	-mprefixed-addr is specified without -mcpu=future.
	(rs6000_opt_masks): Add entry for prefixed-addr.
	* rs6000.opt (mprefixed-addr): New option.

2019-05-30  Sam Tebbs  <sam.tebbs@arm.com>

	* aarch64/aarch64.c (aarch64_post_cfi_startproc): Add
	cfun->is_thunk check.

2019-05-30  Jakub Jelinek  <jakub@redhat.com>

	* tree-predcom.c (is_inv_store_elimination_chain): Fix a typo - lenght
	to length.

2019-05-30  Martin Liska  <mliska@suse.cz>

	* gdbinit.in: Fix 'ptc' command.  Add trt
	that prints TREE_TYPE($).

2019-05-29  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_call_template_1): Handle pcrel
	calls here...
	(rs6000_indirect_call_template_1): ...and here.
	(rs6000_pltseq_template): Handle plt_pcrel34.  Rework tocsave,
	plt16_ha, plt16_lo, mtctr indirect calls.  Use
	rs6000_pltseq_enum.
	(rs6000_decl_ok_for_sibcall): New function.
	(rs6000_function_ok_for_sibcall): Refactor.
	(rs6000_longcall_ref): Use UNSPEC_PLT_PCREL when pcrel.
	(rs6000_call_aix): Don't emit toc restore rtl for indirect calls
	when pcrel.  Reorganize.
	(rs6000_sibcall_aix): Don't add r2 to function usage when pcrel.
	* rs6000.h (rs6000_pltseq_enum): New enum.
	* rs6000.md (UNSPEC_PLT_PCREL): New unspec.
	(*pltseq_tocsave): Use rs6000_pltseq_enum.
	(*pltseq_plt16_ha): Likewise.
	(*pltseq_plt16_lo): Likewise.
	(*pltseq_mtctr): Likewise.
	(*pltseq_plt_pcrel): New insn.
	(*call_local_aix): Handle @notoc calls.
	(*call_value_local_aix): Likewise.
	(*call_nonlocal_aix): Adjust lengths for pcrel calls.
	(*call_value_nonlocal_aix): Likewise.
	(*call_indirect_pcrel): New insn.
	(*call_value_indirect_pcrel): Likewise.

2019-05-29  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (*save_multiple<mode>): Rename from
	save_multiple<mode>.
	(*restore_multiple<mode>): Rename from restore_multiple<mode>.
	(*restore_multiple_and_return<mode>): Rename from
	restore_multiple_and_return<mode>.
	(*restore_multiple_leave_return<mode>): Rename from
	restore_multiple_leave_return<mode>.

2019-05-29  Yoshinori Sato  <ysato@users.sourceforge.jp>

	* config.gcc (rx-*-linux*): New target.
	* config/rx/elf.opt: New file.
	* config/rx/linux.h: Likewise.
	* config/rx/t-linux: Likewise.
	* config/rx/rx.c (TARGET_SAVE_ACC_REGISTER): If not defined,
	make it zero.
	* config/rx/rx.h (ASM_APP_ON): Allow to be overridden.
	(ASM_APP_OFF): Likewise.
	* config/rx/rx.opt: Drop -msim and -mas100-syntax, they were
	moved elsewhere.

2019-05-29  Jan Hubicka  <jh@suse.cz>

	* tree-ssa-alias.c (same_type_for_tbaa): Return ture if main
	variants are pointer equivalent.

2019-05-29  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	* config/aarch64/aarch64-c.c: Added TARGET_SVE2.
	* config/aarch64/aarch64-sve2.md: New file.
	(<u>avg<mode>3_floor): New pattern.
	(<u>avg<mode>3_ceil): Likewise.
	(*<sur>h<addsub><mode>): Likewise.
	* config/aarch64/aarch64.h: Added AARCH64_ISA_SVE2 and TARGET_SVE2.
	* config/aarch64/aarch64.md: Include aarch64-sve2.md.

2019-05-29  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/90543
	* optc-save-gen.awk: In cl_optimization_print, use correct condition
	for var_opt_string printing.  In cl_optimization_print_diff, print
	(null) instead of invoking undefined behavior if one of the
	var_opt_string pointers is NULL and use && instead of first || in the
	guarding condition.  For var_target_other options, handle const char *
	target variables similarly to const char * optimize node variables.

2019-05-29  Sam Tebbs  <sam.tebbs@arm.com>

	* config/aarch64/aarch64-builtins.c (aarch64_builtins): Add
	AARCH64_PAUTH_BUILTIN_AUTIB1716 and AARCH64_PAUTH_BUILTIN_PACIB1716.
	* config/aarch64/aarch64-builtins.c (aarch64_init_pauth_hint_builtins):
	Add autib1716 and pacib1716 initialisation.
	* config/aarch64/aarch64-builtins.c (aarch64_expand_builtin): Add checks
	for autib1716 and pacib1716.
	* config/aarch64/aarch64-protos.h (aarch64_key_type,
	aarch64_post_cfi_startproc): Define.
	* config/aarch64/aarch64-protos.h (aarch64_ra_sign_key): Define extern.
	* config/aarch64/aarch64.c (aarch64_handle_standard_branch_protection,
	aarch64_handle_pac_ret_protection): Set default sign key to A.
	* config/aarch64/aarch64.c (aarch64_expand_epilogue,
	aarch64_expand_prologue): Add check for b-key.
	* config/aarch64/aarch64.c (aarch64_ra_sign_key,
	aarch64_post_cfi_startproc, aarch64_handle_pac_ret_b_key): Define.
	* config/aarch64/aarch64.h (TARGET_ASM_POST_CFI_STARTPROC): Define.
	* config/aarch64/aarch64.c (aarch64_pac_ret_subtypes): Add "b-key".
	* config/aarch64/aarch64.md (unspec): Add UNSPEC_AUTIA1716,
	UNSPEC_AUTIB1716, UNSPEC_AUTIASP, UNSPEC_AUTIBSP, UNSPEC_PACIA1716,
	UNSPEC_PACIB1716, UNSPEC_PACIASP, UNSPEC_PACIBSP.
	* config/aarch64/aarch64.md (do_return): Add check for b-key.
	* config/aarch64/aarch64.md (<pauth_mnem_prefix>sp): Replace
	pauth_hint_num_a with pauth_hint_num.
	* config/aarch64/aarch64.md (<pauth_mnem_prefix>1716): Replace
	pauth_hint_num_a with pauth_hint_num.
	* config/aarch64/aarch64.opt (msign-return-address=): Deprecate.
	* config/aarch64/iterators.md (PAUTH_LR_SP): Add UNSPEC_AUTIASP,
	UNSPEC_AUTIBSP, UNSPEC_PACIASP, UNSPEC_PACIBSP.
	* config/aarch64/iterators.md (PAUTH_17_16): Add UNSPEC_AUTIA1716,
	UNSPEC_AUTIB1716, UNSPEC_PACIA1716, UNSPEC_PACIB1716.
	* config/aarch64/iterators.md (pauth_mnem_prefix): Add UNSPEC_AUTIA1716,
	UNSPEC_AUTIB1716, UNSPEC_PACIA1716, UNSPEC_PACIB1716, UNSPEC_AUTIASP,
	UNSPEC_AUTIBSP, UNSPEC_PACIASP, UNSPEC_PACIBSP.
	* config/aarch64/iterators.md (pauth_hint_num_a): Replace
	UNSPEC_PACI1716 and UNSPEC_AUTI1716 with UNSPEC_PACIA1716 and
	UNSPEC_AUTIA1716 respectively.
	* config/aarch64/iterators.md (pauth_hint_num_a): Rename to
	pauth_hint_num and add UNSPEC_PACIBSP, UNSPEC_AUTIBSP,
	UNSPEC_PACIB1716, UNSPEC_AUTIB1716.
	* doc/invoke.texi (-mbranch-protection): Add b-key type.
	* config/aarch64/aarch64-bti-insert.c (aarch64_pac_insn_p): Rename
	UNSPEC_PACISP to UNSPEC_PACIASP and UNSPEC_PACIBSP.

2019-05-29  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (struct gimplify_omp_ctx): Add clauses member.
	(gimplify_scan_omp_clauses): Initialize ctx->clauses.
	(gimplify_adjust_omp_clauses_1): Transform lastprivate conditional
	explicit clause on combined parallel into implicit shared clause.
	(gimplify_adjust_omp_clauses): Move lastprivate conditional clause
	and firstprivate if the decl has one too from combined parallel to
	the worksharing construct.

2019-05-28  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Michael Meissner  <meissner@linux.ibm.com>

	* config/rs6000/rs6000-cpus.def (OTHER_FUTURES_MASK): New #define.

2019-05-28  Michael Meissner  <meissner@linux.ibm.com>

	* rtl.h (LABEL_REF_P): New #define.

2019-05-28  John David Anglin  <danglin@gcc.gnu.org>

	* config/pa/pa.c (hppa_profile_hook): Remove offset adjustment.

2019-05-28  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	* internal-fn.c: Marked mask_load_direct as vectorizable.
	* tree-data-ref.c (data_ref_compare_tree): Fixed comment typo.
	* tree-vect-data-refs.c (can_group_stmts_p): Allow masked loads to be
	combined even if masks different with allow_slp_p param.
	(vect_analyze_data_ref_accesses): Mark SLP only vectorizable groups.
	* tree-vect-loop.c (vect_dissolve_slp_only_groups): New function to
	dissolve SLP-only vectorizable groups when SLP has been discarded.
	(vect_analyze_loop_2): Call vect_dissolve_slp_only_groups when needed.
	* tree-vect-slp.c (vect_get_and_check_slp_defs): Check masked loads
	masks.
	(vect_build_slp_tree_1): Fixed comment typo.
	(vect_build_slp_tree_2): Include masks from masked loads in SLP tree.
	* tree-vect-stmts.c (vectorizable_load): Allow vectorizaion of masked
	loads for SLP only.
	* tree-vectorizer.h (_stmt_vec_info): Added flag for SLP-only
	vectorizable.
	* tree-vectorizer.c (vec_info::new_stmt_vec_info): Likewise.

2019-05-28  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/alpha/alpha.c [TARGET_ABI_OSF] (alpha_output_mi_thunk_osf):
	Remove obsolete use_thunk reference.
	* config/i386/i386.c (x86_output_mi_thunk): Likewise.
	* config/ia64/ia64.c (ia64_output_mi_thunk): Likewise.
	* config/nios2/nios2.c (nios2_asm_output_mi_thunk): Likewise.
	* config/or1k/or1k.c (or1k_output_mi_thunk): Likewise.
	* config/rs6000/rs6000.c (rs6000_output_mi_thunk): Likewise.
	* config/sh/sh.c (sh_output_mi_thunk): Likewise.
	* config/sparc/sparc.c (sparc_output_mi_thunk): Likewise.
	* config/tilegx/tilegx.c (tilegx_output_mi_thunk): Likewise.
	* config/tilepro/tilepro.c (tilepro_asm_output_mi_thunk): Likewise.

2019-05-28  Nathan Sidwell  <nathan@acm.org>

	* tree.h (IDENTIFIER_ANON_P): New.
	(anon_aggrname_format, anon_aggname_p): Don't declare.
	(make_anon_name): Declare.
	* lto-streamer-out.c (DFS::DFS_write_tree_body): Use IDENTIFIER_ANON_P.
	(hash_tree): Likewise.
	* tree-streamer-out.c (write_ts_decl_minimal_tree): Likewise.
	* tree.c (anon_aggrname_p, anon_aggrname_format): Delete.
	(anon_cnt, make_anon_name): New.

2019-05-28  Martin Liska  <mliska@suse.cz>

	PR other/90315
	* opts-global.c (decode_options): Print help for all
	help_option_arguments.
	* opts.c (print_help): Add new argument.
	(common_handle_option): Remember all values into
	help_option_arguments.
	* opts.h (print_help): Add new argument.

2019-05-28  Martin Liska  <mliska@suse.cz>

	PR ipa/90555
	* ipa-icf-gimple.c (func_checker::compare_loops): New function.
	* ipa-icf-gimple.h (func_checker::compare_loops): Likewise.
	(func_checker::compare_bb): Call compare_loops.

2019-05-27  Jakub Jelinek  <jakub@redhat.com>

	* gimplify.c (gimplify_scan_omp_clauses): Allow lastprivate conditional
	on sections construct.
	* omp-low.c (lower_lastprivate_conditional_clauses): Handle sections
	construct.
	(lower_omp_sections): Handle lastprivate conditional.
	(lower_omp_1) <case GIMPLE_ASSIGN>: Handle sections construct with
	lastprivate_conditional_map.
	* omp-expand.c (expand_omp_sections): Handle lastprivate conditional.

	* omp-low.c (lower_omp_1) <case GIMPLE_ASSIGN>: Look through ordered,
	critical, taskgroup and section regions when looking for a region
	with non-NULL lastprivate_conditional_map.

2019-05-27  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.c (ix86_gen_add3): Remove indirect function.
	(*ix86_gen_sub3): Ditto.
	(*ix86_gen_sub3_carry): Ditto.
	(*ix86_gen_one_cmpl2): Ditto.
	(*ix86_gen_andsp): Ditto.
	(ix86_init_large_pic_reg): Use gen_add2_insn instead of ix86_gen_add3.
	(gen_and2_insn): New static function.
	(ix86_expand_prologue): Use gen_and2_insn instead of ix86_gen_andsp.
	Use gen_add3_insn instead of ix86_gen_add3.
	(ix86_expand_split_stack_prologue): Use gen_add2_insn
	instead of ix86_gen_add3.
	(legitimize_tls_address): Use gen_add2_insn instead of ix86_gen_add3.
	Use gen_sub3_insn instead of ix86_gen_sub3.
	* config/i386-expand.c (ix86_split_long_move): Use gen_add2_insn
	instead of ix86_gen_add3.
	(ix86_expand_strlensi_unroll_1): Use gen_add2_insn instead of
	ix86_gen_add3.  Use gen_sub3_insn instead of ix86_gen_sub3.
	(construct_plt_address): Use gen_add2_insn instead of ix86_gen_add3.
	* config/i386/i386-options.c (ix86_option_override_internal):
	Do not initialize ix86_gen_add3, ix86_gen_sub3, ix86_gen_sub3_carry,
	ix86_gen_one_cmpl2 and ix86_gen_andsp.

2019-05-27  Eric Botcazou  <ebotcazou@adacore.com>

	* dwarf2out.c (resolve_args_picking_1): Deal with DW_OP_GNU_addr_index
	and DW_OP_GNU_const_index opcodes.

2019-05-27  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.h (STACK_SIZE_MODE): Define.

2019-05-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90637
	* tree-ssa-sink.c (statement_sink_location): Honor the
	computed sink location for single-uses.

2019-05-27  Richard Biener  <rguenther@suse.de>

	PR middle-end/90610
	* match.pd (vec_perm): Avoid clobbering op0 when not generating
	a bit-insert.

2019-05-26  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (@sub<mode>3_carry): Rename
	from sub<mode>3_carry.
	(@leave_<mode>): New expander.
	(*leave): Rename from leave.
	(*leave_rex64): Rename from leave_rex64.
	(@monitorx_<mode>): Rename from monitorx_<mode>.
	(@clzero_<mode>): Rename from clzero_<mode>.
	* config/i386/sse.md (@sse3_monitor_<mode>): Rename
	from sse3_monitor_<mode>.
	* config/i386/i386.c (ix86_gen_sub3_carry): Remove indirect function.
	(*ix86_gen_leave): Ditto.
	(*ix86_gen_monitor): Ditto.
	(*ix86_gen_monitorx): Ditto.
	(*ix86_gen_clzero): Ditto.
	(ix86_emit_leave): Use gen_leave instead of ix86_gen_leave.
	* config/i386/i386-expand.c (ix86_expand_strlensi_unroll_1):
	Use gen_sub3_carry instead of ix86_gen_sub3_carry.
	(ix86_expand_builtin) <case IX86_BUILTIN_MONITOR>:
	Use gen_sse3_monitor instead of ix86_gen_monitor.
	<case IX86_BUILTIN_MONITORX>: Use gen_monitorx
	instead of ix86_gen_monitorx.
	<case IX86_BUILTIN_CLZERO>: Use gen_clzero
	instead of ix86_gen_clzero.
	* config/i386/i386-options.c (ix86_option_override_internal):
	Do not initialize ix86_gen_leave, ix86_gen_sub3_carry,
	ix86_gen_monitor, ix86_gen_monitorx and ix86_gen_clzero.

2019-05-26  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (@tls_global_dynamic_64_<mode>):
	Rename from tls_global_dynamic_64_<mode>.
	(@tls_local_dynamic_base_64_<mode>): Rename from
	tls_local_dynamic_base_64_<mode>.
	* config/i386/i386.c (*ix86_gen_tls_global_dynamic_64):
	Remove indirect function.
	(*ix86_gen_tls_local_dynamic_base_64): Ditto.
	(legitimize_tls_address): Use gen_tls_global_dynamic_64 function
	instead of ix86_gen_tls_global_dynamic_64.
	Use gen_tls_local_dynamic_base_64 instead of
	ix86_gen_tls_local_dynamic_base_64.
	* config/i386/i386-options.c (ix86_option_override_internal):
	Do not initialize ix86_gen_tls_global_dynamic_64 and
	ix86_gen_tls_local_dynamic_base_64.

2019-05-26  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (@pro_epilogue_adjust_stack_add_<mode>)
	Rename from pro_epilogue_adjust_stack_<mode>_add.
	(@pro_epilogue_adjust_stack_sub_<mode>)
	Rename from pro_epilogue_adjust_stack_<mode>_sub.
	(@allocate_stack_worker_probe_<mode>):
	Rename from allocate_stack_worker_probe_<mode>.
	(allocate_stack): Use gen_allocate_stack_worker_probe.
	(probe_stack): Use gen_probe_stack_1.
	(@probe_stack_1_<mode>): Rename from probe_stack_<mode>.
	(@adjust_stack_and_probe_<mode>): Rename from
	adjust_stack_and_probe<mode>.
	(@probe_stack_range_<mode>): Rename from probe_stack_range<mode>.
	(stack_protect_set): Use gen_stack_protect_set_1.
	(@stack_protect_set_1_<mode>): Rename from stack_protect_set_<mode>.
	(stack_protect_test): Use gen_stack_protect_test_1.
	(@stack_protect_test_1_<mode>): Rename from stack_protect_test_<mode>.
	* config/i386/i386.c (*ix86_gen_allocate_stack_worker):
	Remove indirect function.
	(*ix86_gen_adjust_stack_and_probe): Ditto.
	(*ix86_gen_probe_stack_range): Ditto.
	(pro_epilogue_adjust_stack): Use gen_pro_epilogue_adjust_stack_add
	instead of gen_pro_epilogue_adjust_stack_{si,di}_add.
	(ix86_adjust_stack_and_probe_stack_clash): Use
	gen_adjust_stack_and_probe instead of ix86_gen_adjust_stack_and_probe.
	(ix86_adjust_stack_and_probe): Ditto.
	(ix86_emit_probe_stack_range): Use gen_probe_stack_range instead
	of ix86_gen_probe_stack_range.
	(ix86_expand_prologue): Use gen_pro_epilogue_adjust_stack_sub
	instead of gen_pro_epilogue_adjust_stack_{si,di}_sub.
	* config/i386/x86-tune-sched.c (ix86_macro_fusion_pair_p):
	Include insn-opinit.h.  Use code_for_stack_protect_test_1 instead of
	CODE_FOR_stack_protect_test_{si,di}.
	* config/i386/i386-options.c (ix86_option_override_internal):
	Do not initialize ix86_gen_allocate_stack_worker,
	ix86_gen_adjust_stack_and_probe and ix86_gen_probe_stack_range.

2019-05-26  Gerald Pfeifer  <gerald@pfeifer.com>

	* doc/invoke.texi (Link Options): Many editorial changes around
	-flinker-output.

2019-05-26  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* doc/invoke.texi (x86 Options, -mvect8-ret-in-mem): Remove
	pre-Solaris 11 referene and most Studio compiler details.

2019-05-24  John David Anglin  <danglin@gcc.gnu.org>

	PR target/90530
	* config/pa/pa.c (pa_can_change_mode_class): Accept mode changes from
	DImode to SImode in floating-point registers on 64-bit target.
	* config/pa/pa.md (umulsidi3): Change nonimmediate_operand to
	register_operand in xmpyu patterns.

2019-05-24  Jakub Jelinek  <jakub@redhat.com>

	* tree-core.h (enum omp_clause_code): Add OMP_CLAUSE__CONDTEMP_.
	* tree.h (OMP_CLAUSE_DECL): Use OMP_CLAUSE__CONDTEMP_ instead of
	OMP_CLAUSE__REDUCTEMP_.
	* tree.c (omp_clause_num_ops, omp_clause_code_name): Add
	OMP_CLAUSE__CONDTEMP_.
	(walk_tree_1): Handle OMP_CLAUSE__CONDTEMP_.
	* tree-pretty-print.c (dump_omp_clause): Likewise.
	* tree-nested.c (convert_nonlocal_omp_clauses,
	convert_local_omp_clauses): Likewise.
	* gimplify.c (enum gimplify_omp_var_data): Use hexadecimal constants
	instead of decimal.  Add GOVD_LASTPRIVATE_CONDITIONAL.
	(gimplify_scan_omp_clauses): Don't reject lastprivate conditional
	on OMP_FOR.
	(gimplify_omp_for): Warn and disable conditional modifier from
	lastprivate on loop iterators.
	* omp-general.h (struct omp_for_data): Add lastprivate_conditional
	member.
	* omp-general.c (omp_extract_for_data): Initialize it.
	* omp-low.c (struct omp_context): Add lastprivate_conditional_map
	member.
	(delete_omp_context): Delete it.
	(lower_lastprivate_conditional_clauses): New function.
	(lower_lastprivate_clauses): Add BODY_P and CSTMT_LIST arguments,
	handle lastprivate conditional clauses.
	(lower_reduction_clauses): Add CLIST argument, emit it into
	the critical section if any.
	(lower_omp_sections): Adjust lower_lastprivate_clauses and
	lower_reduction_clauses callers.
	(lower_omp_for_lastprivate): Add CLIST argument, pass it through
	to lower_lastprivate_clauses.
	(lower_omp_for): Call lower_lastprivate_conditional_clauses, adjust
	lower_omp_for_lastprivate and lower_reduction_clauses callers, emit
	clist into a critical section if not emitted there already by
	lower_reduction_clauses.
	(lower_omp_taskreg, lower_omp_teams): Adjust lower_reduction_clauses
	callers.
	(lower_omp_1): Handle GIMPLE_ASSIGNs storing into lastprivate
	conditional variables.
	* omp-expand.c (determine_parallel_type): Punt if OMP_CLAUSE__CONDTEMP_
	clause is present.
	(expand_omp_for_generic, expand_omp_for_static_nochunk,
	expand_omp_for_static_chunk): Handle lastprivate conditional.
	(expand_omp_for): Handle fd.lastprivate_conditional like
	fd.have_reductemp.

2019-05-24  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-run.c (main): Set a non-zero return value if the
	kernel does not exit cleanly.
	* config/gcn/gcn.md (gcn_return): Insert s_waitcnt before s_dcache_wb.

2019-05-24  Jason Merrill  <jason@redhat.com>

	Revert:
	* gimplify.c (gimplify_cond_expr): Don't check TREE_ADDRESSABLE.

2019-05-24  Richard Biener  <rguenther@suse.de>

	PR testsuite/90607
	* tree-loop-distribution.c (struct partition): Add location
	member.
	(partition_alloc): Initialize all fields.
	(generate_memset_builtin): Use the location recorded in the
	partition for the generated call.
	(generate_memcpy_builtin): Likewise.
	(classify_partition): Record the location of a single store
	as location for the partition.

2019-05-24  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.c (gcn_expand_prologue): Use gen_addsi3_scalar_carry
	for lo-part.

2019-05-24  Matthew Malcomson  <matthew.malcomson@arm.com>

	PR target/90588
	* common/config/aarch64/aarch64-common.c
	(aarch64_rewrite_selected_cpu): Change local temporary variable
	type from unsigned long to uint64_t.
	* config/aarch64/aarch64-protos.h (aarch64_parse_extension,
	aarch64_get_extension_string_for_isa_flags): Change declaration to
	match new definition by replacing unsigned long with uint64_t.

2019-05-24  Jakub Jelinek  <jakub@redhat.com>

	PR target/90568
	* config/i386/x86-tune-sched.c (ix86_macro_funsion_pair_p): Call
	gen_attr_type just once instead of 4-7 times.  Formatting fixes.
	Handle stack_protect_test_<mode> codegen similarly to corresponding
	sub instruction.

2019-05-23  Iain Sandoe  <iain@sandoe.co.uk>

	* config/i386/darwin.h: Reject -mfentry*.
	* doc/sourcebuild.texi: Document mfentry target support.

2019-05-23  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_global_entry_point_needed_p):
	Rename to rs6000_global_entry_point_prologue_needed_p.  Return
	false for PC-relative functions.
	(rs6000_output_function_prologue): Change called function name to
	rs6000_global_entry_point_prologue_needed_p.  Emit ".localentry
	name,1" for PC-relative functions.
	(rs6000_elf_declare_function_name): Change called function name to
	rs6000_global_entry_point_prologue_needed_p.

2019-05-23  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/90552
	* config/i386/i386.c (gen_rtx_cost):
	Use ix86_tune_cost instead of ix86_cost.

2019-05-23  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Michael Meissner  <meissner@linux.ibm.com>
	    Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-cpus.def (ISA_FUTURE_MASKS_SERVER): Add
	OPTION_MASK_PCREL.
	(POWERPC_MASKS): Add OPTION_MASK_PCREL.
	* config/rs6000/rs6000-protos.h (rs6000_pcrel_p): New prototype.
	(rs6000_fndecl_pcrel_p): Likewise.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Report
	error if -mpcrel is requested without -mcpu=future.
	(rs6000_opt_masks): Add entry for pcrel.
	(rs6000_fndecl_pcrel_p): New function.
	(rs6000_pcrel_p): Likewise.
	* config/rs6000/rs6000.opt (mpcrel): New option.
	* doc/invoke.texi: Document -mpcrel and -mno-pcrel.

2019-05-23  Jan Hubicka  <jh@suse.cz>
	    Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90576
	* tree-ssa-alias.c (compare_sizes): Remove dead calls to
	poly_int_tree_p.
	(aliasing_component_refs_p): Fix three way size compare conditional;
	give up earlier in case we can not decide on equivalence.

2019-05-23  Bill Schmidt  <wschmidt@linux.ibm.com>
	    Michael Meissner  <meissner@linux.ibm.com>
	    Segher Boessenkool  <segher@kernel.crashing.org>

	* config.gcc: Add future cpu.
	* config/rs6000/driver-rs6000.c (asm_names): Add future cpu.
	* config/rs6000/rs6000-cpus.def (ISA_FUTURE_MASKS_SERVER): New
	#define.
	(POWERPC_MASKS): Add OPTION_MASK_FUTURE.
	(RS6000_CPU): New instantiation for future cpu.
	* config/rs6000/rs6000-opts.h (enum processor_type): Add
	PROCESSOR_FUTURE.
	* config/rs6000/rs6000-string.c (expand_compare_loop): Treat
	PROCESSOR_FUTURE like PROCESSOR_POWER9 for now.
	* config/rs6000/rs6000-tables.opt: Regenerate.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Treat
	PROCESSOR_FUTURE similarly to PROCESSOR_POWER9 for now.
	(rs6000_machine_from_flags): Handle future cpu.
	(rs6000_reassociation_width): Treat PROCESSOR_FUTURE like
	PROCESSOR_POWER9 for now.
	(rs6000_adjust_cost): Likewise.
	(rs6000_issue_rate): Likewise.
	(rs6000_register_move_cost): Likewise.
	(rs6000_opt_masks): Add entry for future.
	* config/rs6000/rs6000.h (ASM_CPU_SPEC): Add future cpu.
	(MASK_FUTURE): New #define.
	* config/rs6000/rs6000.md (define_attr "cpu"): Add future cpu.
	* config/rs6000/rs6000.opt (mfuture): New target option.
	* doc/invoke.texi (mcpu): Add future cpu.

2019-05-23  Martin Liska  <mliska@suse.cz>

	PR c++/90587
	* tree-ssa-uninit.c (value_sat_pred_p): The result of &
	operation points to a temporary (pointed via tree_to_wide_ref)
	that is out of scope after the &.

2019-05-23  Jonathan Wakely  <jwakely@redhat.com>

	PR c++/90592
	* doc/extend.texi (Function Names): Add missing word.

2019-05-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88440
	* opts.c (default_options_table): Enable -ftree-loop-distribute-patterns
	at -O[2s]+.
	* tree-loop-distribution.c (generate_memset_builtin): Fold the
	generated call.
	(generate_memcpy_builtin): Likewise.
	(distribute_loop): Pass in whether to only distribute patterns.
	(prepare_perfect_loop_nest): Also allow size optimization.
	(pass_loop_distribution::execute): When optimizing a loop
	nest for size allow pattern replacement.

2019-05-23  Jakub Jelinek  <jakub@redhat.com>

	PR target/90568
	* config/i386/i386.md (stack_protect_test_<mode>): Use sub instead
	of xor.

2019-05-23  Martin Liska  <mliska@suse.cz>

	PR sanitizer/90570
	* gimplify.c (gimplify_target_expr): Skip TREE_STATIC target
	expression similarly to gimplify_decl_expr.

2019-05-23  Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	* cse.c (cse_dump_path): s/dump_file/f.

2019-05-22  David Malcolm  <dmalcolm@redhat.com>

	PR c++/90462
	* diagnostic-format-json.cc: Include "selftest.h".
	(json_from_expanded_location): Only add "file" key for non-NULL
	file strings.
	(json_from_location_range): Don't add "start" and "finish"
	children if they are UNKNOWN_LOCATION.
	(selftest::test_unknown_location): New selftest.
	(selftest::test_bad_endpoints): New selftest.
	(selftest::diagnostic_format_json_cc_tests): New function.
	* json.cc (json::object::get): New function.
	(selftest::test_object_get): New selftest.
	(selftest::json_cc_tests): Call it.
	* json.h (json::object::get): New decl.
	* selftest-run-tests.c (selftest::run_tests): Call
	selftest::diagnostic_format_json_cc_tests.
	* selftest.h (selftest::diagnostic_format_json_cc_tests): New
	decl.

2019-05-22  Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Andrew Stubbs  <amd@codesourcery.com>

	* config.gcc (gcc_cv_initfini_array): Set for AMD GCN.
	* config/gcn/gcn-run.c (init_array_kernel, fini_array_kernel): New.
	(kernel): Rename to...
	(main_kernel): ... this.
	(load_image): Load _init_array and _fini_array kernels.
	(run): Add argument for kernel to run.
	(main): Run init_array_kernel before main_kernel, and
	fini_array_kernel after.
	* config/gcn/gcn.c (gcn_handle_amdgpu_hsa_kernel_attribute): Allow
	amdgpu_hsa_kernel attribute on functions.
	(gcn_disable_constructors): Delete.
	(TARGET_ASM_CONSTRUCTOR, TARGET_ASM_DESTRUCTOR): Delete.
	* config/gcn/crt0.c (size_t): Define.
	(_init_array, _fini_array): New.
	(__preinit_array_start, __preinit_array_end,
	__init_array_start, __init_array_end,
	__fini_array_start, __fini_array_end): Declare weak references.

2019-05-22  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.c (gcn_trampoline_init): Call "sorry" on GCN5.

2019-05-22  Jason Merrill  <jason@redhat.com>

	* gimplify.c (gimplify_cond_expr): Don't check TREE_ADDRESSABLE.

2019-05-22  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/88483
	* config/i386/i386-options.c (ix86_init_machine_status): Set
	stack_frame_required to true.
	* config/i386/i386.c (ix86_get_frame_size): New function.
	(ix86_frame_pointer_required): Replace get_frame_size with
	ix86_get_frame_size.
	(ix86_compute_frame_layout): Likewise.
	(ix86_find_max_used_stack_alignment): Changed to void.  Set
	stack_frame_required.
	(ix86_finalize_stack_frame_flags): Always call
	ix86_find_max_used_stack_alignment.  Replace get_frame_size with
	ix86_get_frame_size.
	* config/i386/i386.h (machine_function): Add stack_frame_required.

2019-05-22  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (sse_cvtpi2ps): Use TARGET_MMX in insn condition.

2019-05-22  Matthew Malcomson  <matthew.malcomson@arm.com>

	* common/config/aarch64/aarch64-common.c
	(struct aarch64_option_extension, struct processor_name_to_arch,
	struct arch_to_arch_name, aarch64_parse_extension, opt_ext_cmp,
	aarch64_contains_opt,
	aarch64_get_extension_string_for_isa_flags): Change type of
	variables storing flags to uint64_t.
	* config/aarch64/aarch64-option-extensions.def (sve2, sve2-sm4,
	sve2-aes, sve2-sha3, bitperm): New optional SVE2 extension flags.
	* config/aarch64/aarch64.c (struct processor,
	aarch64_parse_arch, aarch64_parse_cpu, aarch64_validate_mcpu,
	aarch64_validate_march, aarch64_override_options,
	aarch64_option_print, aarch64_handle_attr_isa_flags,
	aarch64_declare_function_name, aarch64_start_file): Make flag
	variables uint64_t.
	* config/aarch64/aarch64.h (AARCH64_FL_SVE2, AARCH64_FL_SVE2_AES,
	AARCH64_FL_SVE2_SM4, AARCH64_FL_SVE2_SHA3,
	AARCH64_FL_SVE2_BITPERM): New macro feature flags.
	* config/aarch64/aarch64.opt (aarch64_isa_flags): Make uint64_t.
	* config/aarch64/driver-aarch64.c
	(struct aarch64_arch_extension, struct aarch64_core_data,
	struct aarch64_arch_driver_info, host_detect_local_cpu): Make
	flag variables uint64_t.
	* doc/invoke.texi: Add documentation for new arguments.

2019-05-22  Richard Biener  <rguenther@suse.de>

	* alias.c (ao_ref_from_mem): Move stack-slot sharing
	rewrite ...
	* emit-rtl.c (set_mem_attributes_minus_bitpos): ... here.

2019-05-22  Martin Liska  <mliska@suse.cz>

	PR lto/90500
	* doc/extend.texi: Document the change.

2019-05-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90450
	* tree-ssa-loop-im.c (struct im_mem_ref): Add ref_decomposed.
	(mem_ref_hasher::equal): Check it.
	(mem_ref_alloc): Initialize it.
	(gather_mem_refs_stmt): Set it.

2019-05-22  Richard Biener  <rguenther@suse.de>

	* gimple-fold.c (arith_code_with_undefined_signed_overflow):
	Add ABS_EXPR.
	(rewrite_to_defined_overflow): Handle rewriting ABS_EXPR
	as ABSU_EXPR.

2019-05-22  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.h (ASM_OPT_ANY): Define.
	(ASM_CPU_SPEC): Conditionally add -many.
	* config/rs6000/rs6000.c (rs6000_machine): New static var.
	(rs6000_machine_from_flags, emit_asm_machine): New functions..
	(rs6000_file_start): ..extracted from here, and modified to
	test all ISA bits.
	(rs6000_output_function_prologue): Emit .machine as necessary.

2019-05-22  Hans-Peter Nilsson  <hp@axis.com>

	PR middle-end/90553
	* ira-lives.c (process_bb_node_lives): Consider defs
	for a call insn to be die before the call, not after.

	* function.c (assign_parm_setup_block): Raise alignment of
	stacked parameter only for STRICT_ALIGNMENT targets.

2019-05-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wz"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wz.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wz" constraint by "d" with "p7".
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wl"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wl.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wl" constraint by "d" with "p6".
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wm"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wm.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/vsx.md: Replace "wm" constraint by "wa" with "p8v".
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wk"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wk.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wk" constraint by "ws" with "p8v".
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wj"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wj.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wj" constraint by "wi" with "p8v".
	(VS_64dm): Delete.
	* config/rs6000/vsx.md: Ditto.
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-21  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wh"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wh.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wh" constraint by "wa" with "p8v".
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-21  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/90547
	* config/i386/i386.md (anddi_1 to andsi_1_zext splitter):
	Avoid calling gen_lowpart with CONST operand.

2019-05-21  Alexandre Oliva  <aoliva@redhat.com>

	* tree-ssa-threadupdate.c (struct ssa_local_info_t): Add
	field template_last_to_copy.
	(ssa_create_duplicates): Set it, and use it.  Attempt to
	preserve more debug stmts.

2019-05-21  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (VF1_AVX2): New mode iterator.
	(signbit<mode>2): New expander

2019-05-21  James Clarke  <jrtc27@jrtc27.com>

	PR bootstrap/87338
	* dwarf2out.c (dwarf2out_inline_entry): Use ASM_OUTPUT_DEBUG_LABEL
	instead of ASM_GENERATE_INTERNAL_LABEL and ASM_OUTPUT_LABEL.

2019-05-21  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/cpuid.h (__cpuid): For 32bit targets, zero
	%ebx and %ecx bafore calling cpuid with leaf 1 or
	non-constant leaf argument.

2019-05-21  Alan Modra  <amodra@gmail.com>

	PR target/90545
	* config/rs6000/rs6000.c (rs6000_register_move_cost): Increase
	power9 direct move cost.

2019-05-21  Richard Biener  <rguenther@suse.de>

	PR middle-end/90510
	* fold-const.c (fold_read_from_vector): New function.
	* fold-const.h (fold_read_from_vector): Declare.
	* match.pd (VEC_PERM_EXPR): Build BIT_INSERT_EXPRs for
	single-element insert permutations.  Canonicalize selector
	further and fix issue with last commit.

2019-05-21  Vladislav Ivanishin  <vlad@ispras.ru>

	* tree-cfg.h (split_critical_edges): Add for_edge_insertion_p
	parameter with default value false to declaration.
	(split_edges_for_insertion): New inline function.  Wrapper for
	split_critical_edges with for_edge_insertion_p = true.
	* tree-cfg.c (split_critical_edges): Don't split non-critical
	edges if for_edge_insertion_p is false.  Fix whitespace.
	* tree-ssa-pre.c (pass_pre::execute): Call
	split_edges_for_insertion instead of split_critical_edges.
	* tree-ssa-tail-merge.c (tail_merge_optimize): Ditto.
	* tree-ssa-sink.c (pass_sink_code::execute): Ditto.
	(pass_data_sink_code): Update function name in the comment.

2019-05-21  Vladislav Ivanishin  <vlad@ispras.ru>

	* tree-ssa-uninit.c (value_sat_pred_p): This new function is a wrapper
	around is_value_included_in that knows how to handle BIT_AND_EXPR.
	(is_pred_expr_subset_of): Use the new function.  Handle more cases where
	code1 == EQ_EXPR and where code1 == BIT_AND_EXPR and thus fix some false
	positives.

2019-05-21  Martin Liska  <mliska@suse.cz>

	* config/rs6000/driver-rs6000.c (elf_platform): Do not use
	an extra newline.
	* config/rs6000/rs6000-c.c (rs6000_pragma_longcal): Wrap pragma in %<%>.
	(altivec_resolve_overloaded_builtin): Likewise for vec_lvsl and
	vec_lvsr.
	* config/rs6000/rs6000.c (rs6000_option_override_internal):
	Quote a C type.
	(rs6000_function_arg): Likewise.
	(rs6000_expand_set_fpscr_drn_builtin): Remove trailing dot.
	(rs6000_expand_ternop_builtin): Use interval syntax.
	(get_element_number): Likewise.
	(altivec_expand_builtin): Likewise.
	(rs6000_get_function_versions_dispatcher): Quote target_clones.

2019-05-20  Jakub Jelinek  <jakub@redhat.com>

	PR c++/59813
	PR target/90418
	* function.h (struct function): Add calls_eh_return member.
	* gimplify.c (gimplify_call_expr): Set cfun->calls_eh_return when
	gimplifying __builtin_eh_return call.
	* tree-inline.c (initialize_cfun): Copy calls_eh_return from src_cfun
	to cfun.
	(expand_call_inline): Or in src_cfun->calls_eh_return into
	dst_cfun->calls_eh_return.
	* tree-tailcall.c (suitable_for_tail_call_opt_p): Return false if
	cfun->calls_eh_return.
	* lto-streamer-in.c (input_struct_function_base): Read calls_eh_return.
	* lto-streamer-out.c (output_struct_function_base): Write
	calls_eh_return.

2019-05-20  Marc Glisse  <marc.glisse@inria.fr>

	PR rtl-optimization/43147
	* config/i386/i386.c (ix86_gimple_fold_builtin): Handle
	IX86_BUILTIN_SHUFPD.

2019-05-20  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (refs_may_alias_p_2): Break out from ...
	(refs_may_alias_p_1): ... here; update stats.
	(refs_may_alias_p): Do not update stats here.

2019-05-20  Richard Biener  <rguenther@suse.de>

	* tree-ssa-structalias.c (find_func_aliases): POINTER_DIFF_EXPR
	doesn't produce pointers.
	{TRUNC,CEIL,FLOOR,ROUND,EXACT}_{DIV,MOD}_EXPR points to what
	the first operand points to.

2019-05-20  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (compare_sizes): New function.
	(sompare_type_sizes): New function
	(aliasing_component_refs_p): Use it.
	(indirect_ref_may_alias_decl_p): Likewise.

2019-05-20  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/i386/sol2.h (CC1_SPEC): Reject -mx32.

2019-05-20  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config/sol2.h (LIBTSAN_EARLY_SPEC): Remove : after %e.
	(LIBLSAN_EARLY_SPEC): Likewise.
	* config/i386/sol2.h (ASAN_REJECT_SPEC): Likewise.

2019-05-20  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c (ix86_libc_has_fast_function):
	Add ATTRIBUTE_UNUSED for the argument.

2019-05-20  Richard Biener  <rguenther@suse.de>

	* gimple-match-head.c: Include vec-perm-indices.h.
	* generic-match-head.c: Likewise.
	* fold-const.h (fold_vec_perm): Declare when vec-perm-indices.h
	is included.
	* fold-const.c (fold_vec_perm): Export.
	(fold_ternary_loc): Move non-constant folding of VEC_PERM_EXPR...
	(match.pd): ...here.

2019-05-20  Jakub Jelinek  <jakub@redhat.com>

	* cfgloop.h (struct loop): Add simdlen member.
	* cfgloopmanip.c (copy_loop_info): Copy simdlen as well.
	* omp-expand.c (expand_omp_simd): Set it if simdlen clause is present.
	* tree-vect-loop.c (vect_analyze_loop): Pass loop->simdlen != 0
	as new argument to autovectorize_vector_sizes target hook.  If
	loop->simdlen, pick up vector size where the vectorization factor
	is equal to loop->simd, and if there is none, fall back to the first
	successful one.
	(vect_transform_loop): Adjust autovectorize_vector_sizes target hook
	caller.
	* omp-low.c (omp_clause_aligned_alignment): Likewise.
	* omp-general.c (omp_max_vf): Likewise.
	* optabs-query.c (can_vec_mask_load_store_p): Likewise.
	* tree-vect-slp.c (vect_slp_bb): Likewise.
	* target.def (autovectorize_vector_sizes): Add ALL argument and
	document it.
	* doc/tm.texi: Adjust documentation.
	* targhooks.c (default_autovectorize_vector_sizes): Add bool argument.
	* targhooks.h (default_autovectorize_vector_sizes): Likewise.
	* config/aarch64/aarch64.c (aarch64_autovectorize_vector_sizes): Add
	bool argument.
	* config/arc/arc.c (arc_autovectorize_vector_sizes): Likewise.
	* config/arm/arm.c (arm_autovectorize_vector_sizes): Likewise.
	* config/mips/mips.c (mips_autovectorize_vector_sizes): Likewise.
	* config/i386/i386.c (ix86_autovectorize_vector_sizes): Likewise.  If
	true and TARGET_AVX512F or TARGET_AVX, push 3 or 2 sizes even if
	preferred vector size is not 512-bit or 256-bit, just put those
	unpreferred ones last.

2019-05-20  Martin Liska  <mliska@suse.cz>

	* targhooks.c (default_libc_has_fast_function): New function.
	* targhooks.h (default_libc_has_fast_function): Likewise.

2019-05-20  Martin Liska  <mliska@suse.cz>

	PR middle-end/90263
	* builtins.c (expand_builtin_memory_copy_args): When having a
	target with fast mempcpy implementation do now use memcpy.
	* config/i386/i386.c (ix86_libc_has_fast_function): New.
	(TARGET_LIBC_HAS_FAST_FUNCTION): Likewise.
	* doc/tm.texi: Likewise.
	* doc/tm.texi.in: Likewise.
	* target.def:
	* expr.c (emit_block_move_hints): Add 2 new arguments.
	* expr.h (emit_block_move_hints): Bail out when libcall
	to memcpy would be used.

2019-05-20  Martin Liska  <mliska@suse.cz>

	* profile-count.c: Add vertical spacing in order
	to separate functions.
	* profile-count.h: Likewise.

2019-05-20  Martin Liska  <mliska@suse.cz>

	* profile-count.h: Do not use full qualified
	names if possible.
	* profile-count.c (profile_count::to_frequency): Likewise.

2019-05-20  Martin Liska  <mliska@suse.cz>

	* profile-count.h (enum profile_quality): Use capital letters
	for enum value names.  Use the adjusted names.
	* profile-count.c: Use the adjusted names.

2019-05-19  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wH"):
	Delete.
	(define_register_constraint "wI"): Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wH and RS6000_CONSTRAINT_wI.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wH" and "wI" constraints by "v"
	resp. "d", or with "wa" as appropriate, all with "p8v".
	* config/rs6000/vsx.md: Ditto.
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-19  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wy"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wy.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wy" constraint by "wa" with "p8v".
	Use "<Fisa>" as "isa" in all alternatives that use "<Fv2>".
	(define_mode_attr Fisa): New.
	* config/rs6000/vsx.md: Replace "wy" constraint by "wa" with "p8v".
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-19  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wu"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wu.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wu" constraint by "v" or "wa",
	both with "p8v".
	(define_mode_attr Fa): Delete.
	* config/rs6000/vsx.md: Ditto.
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-19  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wJ"):
	Delete.
	(define_register_constraint "wK"): Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wJ and RS6000_CONSTRAINT_wK.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wJ" constraint by "wI" with "p9v".
	Replace "wK" constraint by "wH" with "p9v".
	* config/rs6000/vsx.md: Ditto.
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-19  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wb"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wb.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wb" constraint by "v" with "p9v".
	* config/rs6000/vsx.md: Ditto.
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-19  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/constraints.md (define_register_constraint "wo"):
	Delete.
	* config/rs6000/rs6000.h (enum r6000_reg_class_enum): Delete
	RS6000_CONSTRAINT_wo.
	* config/rs6000/rs6000.c (rs6000_debug_reg_global): Adjust.
	(rs6000_init_hard_regno_mode_ok): Adjust.
	* config/rs6000/rs6000.md: Replace "wo" constraint by "wa" with "p9v".
	* config/rs6000/altivec.md: Ditto.
	* doc/md.texi (Machine Constraints): Adjust.

2019-05-18  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin-c.c (darwin_register_objc_includes): Do not
	prepend the sysroot when building gnu-runtime header search
	paths.

2019-05-18  Iain Sandoe  <iain@sandoe.co.uk>

	* config/darwin.c (darwin_file_end): Use switch_to_section ()
	instead of direct output of the asm.

2019-05-17  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (restore_saved_cr): Change a boolean
	argument to be type bool (was int before).
	(rs6000_emit_epilogue): Simplify some code.  Declare some variables
	at first use.  Use type bool for some variables.  Fix a theoretical
	eh_return bug for svr4.

2019-05-17  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (isa): New attribute.
	(enabled): New attribute.

2019-05-17  Max Filippov  <jcmvbkbc@gmail.com>

	* config/aarch64/aarch64.c (aarch64_output_mi_thunk): Call
	assemble_start_function and assemble_end_function.

2019-05-17  Thomas Schwinge  <thomas@codesourcery.com>

	PR middle-end/89433
	* omp-general.c (oacc_verify_routine_clauses): Change formal
	parameters.  Add checking if already marked with an OpenACC
	'routine' directive.  Adjust all users.

	PR middle-end/89433
	* omp-general.c (oacc_build_routine_dims): Move some of its
	processing into...
	(oacc_verify_routine_clauses): ... this new function.
	* omp-general.h (oacc_verify_routine_clauses): New prototype.

2019-05-17  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (machopic_output_stub): Adjust the
	formating of picbase labels to match other ports.

2019-05-17  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (macho_branch_islands): Fix bad indent
	in the generated code.

2019-05-16  Martin Sebor  <msebor@redhat.com>

	* builtins.c (expand_builtin_atomic_always_lock_free): Quote
	identifiers, keywords, operators, and types in diagnostics.  Correct
	quoting, spelling, and sentence capitalization issues.
	(expand_builtin_atomic_is_lock_free): Same.
	(fold_builtin_next_arg): Same.
	* cfgexpand.c (expand_one_var): Same.
	(tree_conflicts_with_clobbers_p): Same.
	(expand_asm_stmt): Same.
	(verify_loop_structure): Same.
	* cgraphunit.c (process_function_and_variable_attributes): Same.
	* collect-utils.c (collect_execute): Same.
	* collect2.c (maybe_run_lto_and_relink): Same.
	(is_lto_object_file): Same.
	(scan_prog_file): Same.
	* convert.c (convert_to_real_1): Same.
	* dwarf2out.c (dwarf2out_begin_prologue): Same.
	* except.c (verify_eh_tree): Same.
	* gcc.c (execute): Same.
	(eval_spec_function): Same.
	(run_attempt): Same.
	(driver::set_up_specs): Same.
	(compare_debug_auxbase_opt_spec_function): Same.
	* gcov-tool.c (unlink_gcda_file): Same.
	(do_merge): Same.
	(do_rewrite): Same.
	* gcse.c (gcse_or_cprop_is_too_expensive): Same.
	* gimplify.c (gimplify_asm_expr): Same.
	(gimplify_adjust_omp_clauses): Same.
	* hsa-gen.c (gen_hsa_addr_insns): Same.
	(gen_hsa_insns_for_load): Same.
	(gen_hsa_cmp_insn_from_gimple): Same.
	(gen_hsa_insns_for_operation_assignment): Same.
	(gen_get_level): Same.
	(gen_hsa_alloca): Same.
	(omp_simple_builtin::generate): Same.
	(gen_hsa_atomic_for_builtin): Same.
	(gen_hsa_insns_for_call): Same.
	* input.c (dump_location_info): Same.
	* ipa-devirt.c (compare_virtual_tables): Same.
	* ira.c (ira_setup_eliminable_regset): Same.
	* lra-assigns.c (lra_assign): Same.
	* lra-constraints.c (lra_constraints): Same.
	* lto-streamer-in.c (lto_input_mode_table): Same.
	* lto-wrapper.c (get_options_from_collect_gcc_options): Same.
	(merge_and_complain): Same.
	(compile_offload_image): Same.
	(compile_images_for_offload_targets): Same.
	(debug_objcopy): Same.
	(run_gcc): Same.
	(main): Same.
	* opts.c (print_specific_help): Same.
	(parse_no_sanitize_attribute): Same.
	(print_help): Same.
	(handle_param): Same.
	* plugin.c (add_new_plugin): Same.
	(parse_plugin_arg_opt): Same.
	(try_init_one_plugin): Same.
	* print-rtl.c (debug_bb_n_slim): Quote identifiers, keywords,
	operators, and types in diagnostics.  Correct quoting and spelling
	issues.
	* read-rtl-function.c (parse_edge_flag_token): Same.
	(function_reader::parse_enum_value): Same.
	* reg-stack.c (check_asm_stack_operands): Same.
	* regcprop.c (validate_value_data): Same.
	* sched-rgn.c (make_pass_sched_fusion): Same.
	* stmt.c (check_unique_operand_names): Same.
	* targhooks.c (default_target_option_pragma_parse): Same.
	* tlink.c (recompile_files): Same.
	* toplev.c (process_options): Same.
	(do_compile): Same.
	* trans-mem.c (diagnose_tm_1): Same.
	(ipa_tm_scan_irr_block): Same.
	(ipa_tm_diagnose_transaction): Same.
	* tree-cfg.c (verify_address): Same.  Use get_tree_code_name to
	format a tree code name in a diagnostic.
	(verify_types_in_gimple_min_lval): Same.
	(verify_types_in_gimple_reference): Same.
	(verify_gimple_call): Same.
	(verify_gimple_assign_unary): Same.
	(verify_gimple_assign_binary): Same.
	(verify_gimple_assign_ternary): Same.
	(verify_gimple_assign_single): Same.
	(verify_gimple_switch): Same.
	(verify_gimple_label): Same.
	(verify_gimple_phi): Same.
	(verify_gimple_in_seq): Same.
	(verify_eh_throw_stmt_node): Same.
	(collect_subblocks): Same.
	(gimple_verify_flow_info): Same.
	(do_warn_unused_result): Same.
	* tree-inline.c (expand_call_inline): Same.
	* tree-into-ssa.c (update_ssa): Same.
	* tree.c (tree_int_cst_elt_check_failed): Same.
	(tree_vec_elt_check_failed): Same.
	(omp_clause_operand_check_failed): Same.
	(verify_type_variant): Same.
	(verify_type): Same.
	* value-prof.c (verify_histograms): Same.
	* varasm.c (assemble_start_function): Same.

2019-05-16  Martin Sebor  <msebor@redhat.com>

	* config/i386/i386-expand.c (get_element_number): Quote keywords
	and other internal names in diagnostics.  Adjust other diagnostic
	formatting issues noted by -Wformat-diag.
	* config/i386/i386-features.c
	(ix86_mangle_function_version_assembler_name): Same.
	* config/i386/i386-options.c (ix86_handle_abi_attribute): Same.
	* config/i386/i386.c (ix86_function_type_abi): Same.
	(ix86_function_ms_hook_prologue): Same.
	(classify_argument): Same.
	(ix86_expand_prologue): Same.
	(ix86_md_asm_adjust): Same.
	(ix86_memmodel_check): Same.

2019-05-17  Dragan Mladjenovic  <dmladjenovic@wavecomp.com>

	* config/mips/mips.c (mips_dwarf_frame_reg_mode): Replace
	TARGET_FLOAT64 with !TARGET_FLOAT32, thus handling both fp64
	and fpxx modes.

2019-05-17  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/90497
	* config/i386/i386-expand.c (ix86_expand_builtin): Enable MMX
	intrinsics without SSE/SSE2/SSSE3.
	* config/i386/mmx.md (mmx_uavgv8qi3): Restore TARGET_3DNOW
	check.
	(*mmx_uavgv8qi3): Likewise.

2019-05-17  Richard Biener  <rguenther@suse.de>

	* gimple-pretty-print.c (dump_ternary_rhs): Handle dumping
	VEC_PERM_EXPR as __VEC_PERM with -gimple.

2019-05-17  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtins.def (s390_vec_sldw_*): Use the
	vec_sldw insn pattern.

2019-05-17  Richard Biener  <rguenther@suse.de>

	* ccmp.c (expand_ccmp_expr_1): Do not use gimple_assign_rhs_to_tree.

2019-05-17  Martin Liska  <mliska@suse.cz>

	PR driver/90496
	* toplev.c (output_stack_usage): With LTO and sanitizer it
	happens that a global ctor (_GLOBAL__sub_I_00099_0_main)
	has no file location.

2019-05-16  Jakub Jelinek  <jakub@redhat.com>

	PR c++/90484
	* tree-ssa-scopedtables.c (equal_mem_array_ref_p): Don't assert that
	sz0 is equal to sz1, instead return false in that case.

	* omp-low.c (lower_rec_input_clauses): If OMP_CLAUSE_IF
	has non-constant expression, force sctx.lane and use two
	argument IFN_GOMP_SIMD_LANE instead of single argument.
	* tree-ssa-dce.c (eliminate_unnecessary_stmts): Don't DCE
	two argument IFN_GOMP_SIMD_LANE without lhs.
	* tree-vectorizer.h (struct _loop_vec_info): Add simd_if_cond
	member.
	(LOOP_VINFO_SIMD_IF_COND, LOOP_REQUIRES_VERSIONING_FOR_SIMD_IF_COND):
	Define.
	(LOOP_REQUIRES_VERSIONING): Or in
	LOOP_REQUIRES_VERSIONING_FOR_SIMD_IF_COND.
	* tree-vect-loop.c (_loop_vec_info::_loop_vec_info): Initialize
	simd_if_cond.
	(vect_analyze_loop_2): Punt if LOOP_VINFO_SIMD_IF_COND is constant 0.
	* tree-vect-loop-manip.c (vect_loop_versioning): Add runtime check
	from simd if clause if needed.

2019-05-16  Richard Biener  <rguenther@suse.de>

	* tree-affine.c (expr_to_aff_combination): New function split
	out from...
	(tree_to_aff_combination): ... here.
	(aff_combination_expand): Avoid building a GENERIC tree.

2019-05-16  Max Filippov  <jcmvbkbc@gmail.com>

	* cgraphunit.c (cgraph_node::expand_thunk): Remove
	assemble_start_function and assemble_end_function calls.
	* config/alpha/alpha.c (alpha_output_mi_thunk_osf): Call
	assemble_start_function and assemble_end_function.
	* config/arc/arc.c (arc_output_mi_thunk): Likewise.
	* config/arm/arm.c (arm_output_mi_thunk): Likewise.
	* config/bfin/bfin.c (bfin_output_mi_thunk): Likewise.
	* config/c6x/c6x.c (c6x_output_mi_thunk): Likewise.
	* config/cris/cris.c (cris_asm_output_mi_thunk): Likewise.
	* config/csky/csky.c (csky_output_mi_thunk): Likewise.
	* config/epiphany/epiphany.c (epiphany_output_mi_thunk): Likewise.
	* config/frv/frv.c (frv_asm_output_mi_thunk): Likewise.
	* config/i386/i386.c (x86_output_mi_thunk): Likewise.
	* config/ia64/ia64.c (ia64_output_mi_thunk): Likewise.
	* config/m68k/m68k.c (m68k_output_mi_thunk): Likewise.
	* config/microblaze/microblaze.c (microblaze_asm_output_mi_thunk):
	Likewise.
	* config/mips/mips.c (mips_output_mi_thunk): Likewise.
	* config/mmix/mmix.c (mmix_asm_output_mi_thunk): Likewise.
	* config/mn10300/mn10300.c (mn10300_asm_output_mi_thunk): Likewise.
	* config/nds32/nds32.c (nds32_asm_output_mi_thunk): Likewise.
	* config/nios2/nios2.c (nios2_asm_output_mi_thunk): Likewise.
	* config/or1k/or1k.c (or1k_output_mi_thunk): Likewise.
	* config/pa/pa.c (pa_asm_output_mi_thunk): Likewise.
	* config/riscv/riscv.c (riscv_output_mi_thunk): Likewise.
	* config/rs6000/rs6000.c (rs6000_output_mi_thunk): Likewise.
	* config/s390/s390.c (s390_output_mi_thunk): Likewise.
	* config/sh/sh.c (sh_output_mi_thunk): Likewise.
	* config/sparc/sparc.c (sparc_output_mi_thunk): Likewise.
	* config/spu/spu.c (spu_output_mi_thunk): Likewise.
	* config/stormy16/stormy16.c (xstormy16_asm_output_mi_thunk):
	Likewise.
	* config/tilegx/tilegx.c (tilegx_output_mi_thunk): Likewise.
	* config/tilepro/tilepro.c (tilepro_asm_output_mi_thunk): Likewise.
	* config/vax/vax.c (vax_output_mi_thunk): Likewise.

2019-05-16  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (alias_stats): Add
	aliasing_component_refs_p_may_alias and
	aliasing_component_refs_p_no_alias.
	(dump_alias_stats): Print aliasing_component_refs_p stats.
	(aliasing_component_refs_p): Update stats.

2019-05-16  Martin Liska  <mliska@suse.cz>

	PR lto/90500
	* multiple_target.c (expand_target_clones): Do not allow
	target_clones being used with a symbol that is an alias.

2019-05-16  Vladislav Ivanishin  <vlad@ispras.ru>

	PR tree-optimization/90394
	* tree-ssa-uninit.c (is_pred_expr_subset_of): Potentially give false
	positives rather than ICE for cases where (code2 == NE_EXPR
	&& code1 == BIT_AND_EXPR).

2019-05-16  Jakub Jelinek  <jakub@redhat.com>

	PR fortran/90329
	* tree-core.h (struct tree_decl_common): Document
	decl_nonshareable_flag for PARM_DECLs.
	* tree.h (DECL_HIDDEN_STRING_LENGTH): Define.
	* calls.c (expand_call): Don't try tail call if caller
	has any DECL_HIDDEN_STRING_LENGTH PARM_DECLs that are or might be
	passed on the stack and callee needs to pass any arguments on the
	stack.
	* tree-streamer-in.c (unpack_ts_decl_common_value_fields): Use
	else if instead of series of mutually exclusive ifs.  Handle
	DECL_HIDDEN_STRING_LENGTH for PARM_DECLs.
	* tree-streamer-out.c (pack_ts_decl_common_value_fields): Likewise.

	* lto-streamer.h (LTO_major_version): Bump to 9.

2019-05-16  Jun Ma  <JunMa@linux.alibaba.com>

	PR tree-optimization/90106
	* tree-call-cdce.c (shrink_wrap_one_built_in_call_with_conds): Add
	new parameter as new internal function call, also move it to new
	basic block.
	(use_internal_fn): Pass internal function call to
	shrink_wrap_one_built_in_call_with_conds.

2019-05-15  Jakub Jelinek  <jakub@redhat.com>

	* omp-low.c (lower_rec_input_clauses): For if (0) or simdlen (1) set
	max_vf to 1.
	* omp-expand.c (expand_omp_simd): For if (0) or simdlen (1) clear
	safelen_int and set loop->dont_vectorize.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/i386-builtin.def: Enable MMX intrinsics with
	SSE/SSE2/SSSE3.
	* config/i386/i386-builtins.c (ix86_init_mmx_sse_builtins):
	Likewise.
	* config/i386/i386-expand.c (ix86_expand_builtin): Allow
	SSE/SSE2/SSSE3 to emulate MMX intrinsics with TARGET_MMX_WITH_SSE.
	* config/i386/mmintrin.h: Only require SSE2 if __MMX_WITH_SSE__
	is defined.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (*vec_dupv2sf): Changed to
	define_insn_and_split to support SSE emulation.
	(*vec_extractv2sf_0): Likewise.
	(*vec_extractv2sf_1): Likewise.
	(*vec_extractv2si_0): Likewise.
	(*vec_extractv2si_1): Likewise.
	(*vec_extractv2si_zext_mem): Likewise.
	(vec_setv2sf): Also allow TARGET_MMX_WITH_SSE.
	(vec_extractv2sf_1 splitter): Likewise.
	(vec_extractv2sfsf): Likewise.
	(vec_setv2si): Likewise.
	(vec_extractv2si_1 splitter): Likewise.
	(vec_extractv2sisi): Likewise.
	(vec_setv4hi): Likewise.
	(vec_extractv4hihi): Likewise.
	(vec_setv8qi): Likewise.
	(vec_extractv8qiqi): Likewise.
	(vec_extractv2sfsf): Also allow TARGET_MMX_WITH_SSE.  Pass
	TARGET_MMX_WITH_SSE ix86_expand_vector_extract.
	(vec_extractv2sisi): Likewise.
	(vec_extractv4hihi): Likewise.
	(vec_extractv8qiqi): Likewise.
	(vec_initv2sfsf): Also allow TARGET_MMX_WITH_SSE.  Pass
	TARGET_MMX_WITH_SSE to ix86_expand_vector_init.
	(vec_initv2sisi): Likewise.
	(vec_initv4hihi): Likewise.
	(vec_initv8qiqi): Likewise.
	(vec_setv2si): Also allow TARGET_MMX_WITH_SSE.  Pass
	TARGET_MMX_WITH_SSE to ix86_expand_vector_set.
	(vec_setv4hi): Likewise.
	(vec_setv8qi): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (MMXMODE:mov<mode>): Also allow
	TARGET_MMX_WITH_SSE.
	(MMXMODE:*mov<mode>_internal): Likewise.
	(MMXMODE:movmisalign<mode>): Likewise.

2019-05-15  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89021
	* config/i386/i386.md (*zero_extendsidi2): Add mmx_isa attribute.
	* config/i386/sse.md (sse2_cvtpi2pd): Ditto.
	(sse2_cvtpd2pi): Ditto.
	(sse2_cvttpd2pi): Ditto.
	(*vec_concatv2sf_sse4_1): Ditto.
	(*vec_concatv2sf_sse): Ditto.
	(*vec_concatv2si_sse4_1): Ditto.
	(*vec_concatv2si): Ditto.
	(*vec_concatv4si_0): Ditto.
	(*vec_concatv2di_0): Ditto.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (abs<mode>2): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_palignrdi): Changed to
	define_insn_and_split to support SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_psign<mode>3): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_pshufbv8qi3): Changed to
	define_insn_and_split.  Also allow TARGET_MMX_WITH_SSE.  Add
	SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_pmulhrswv4hi3): Require TARGET_MMX
	or TARGET_MMX_WITH_SSE.
	(*ssse3_pmulhrswv4hi3): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_pmaddubsw): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_ph<plusminus_mnemonic>dv2si3):
	Changed to define_insn_and_split to support SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (ssse3_ph<plusminus_mnemonic>wv4hi3):
	Changed to define_insn_and_split to support SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_<emms>): Renamed to ...
	(*mmx_<emms>): This.
	(mmx_<emms>): New expander.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (sse2_umulv1siv1di3): Add SSE emulation
	support.
	(*sse2_umulv1siv1di3): Add SSE2 emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (sse_movntq): Add SSE2 emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_psadbw): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_uavgv4hi3): Also check TARGET_MMX and
	TARGET_MMX_WITH_SSE.
	(*mmx_uavgv4hi3): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_uavgv8qi3): Also check TARGET_MMX
	and TARGET_MMX_WITH_SSE.
	(*mmx_uavgv8qi3): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/xmmintrin.h: Emulate MMX maskmovq with SSE2
	maskmovdqu for __MMX_WITH_SSE__.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_umulv4hi3_highpart): Also check
	TARGET_MMX and TARGET_MMX_WITH_SSE.
	(*mmx_umulv4hi3_highpart): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_pmovmskb): Changed to
	define_insn_and_split to support SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_<code>v4hi3): Also check TARGET_MMX
	and TARGET_MMX_WITH_SSE.
	(mmx_<code>v8qi3): Likewise.
	(smaxmin:<code>v4hi3): New.
	(umaxmin:<code>v8qi3): Likewise.
	(smaxmin:*mmx_<code>v4hi3): Add SSE emulation.
	(umaxmin:*mmx_<code>v8qi3): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_pinsrw): Also check TARGET_MMX and
	TARGET_MMX_WITH_SSE.
	(*mmx_pinsrw): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_pextrw): Add SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (sse_cvtpi2ps): Changed to
	define_insn_and_split.  Also allow TARGET_MMX_WITH_SSE.  Add
	SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/sse.md (sse_cvtps2pi): Add SSE emulation.
	(sse_cvttps2pi): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_pshufw): Also check TARGET_MMX and
	TARGET_MMX_WITH_SSE.
	(mmx_pshufw_1): Add SSE emulation.
	(*vec_dupv4hi): Changed to define_insn_and_split and also allow
	TARGET_MMX_WITH_SSE to support SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/constraints.md (Yw): New constraint.
	* config/i386/mmx.md (*vec_dupv2si): Changed to
	define_insn_and_split and also allow TARGET_MMX_WITH_SSE to
	support SSE emulation.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_eq<mode>3): Also allow
	TARGET_MMX_WITH_SSE.
	(*mmx_eq<mode>3): Also allow TARGET_MMX_WITH_SSE.  Add SSE
	support.
	(mmx_gt<mode>3): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_andnot<mode>3): Also allow
	TARGET_MMX_WITH_SSE.  Add SSE support.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (any_logic:mmx_<code><mode>3): Also allow
	TARGET_MMX_WITH_SSE.
	(any_logic:<code><mode>3): New.
	(any_logic:*mmx_<code><mode>3): Also allow TARGET_MMX_WITH_SSE.
	Add SSE support.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_ashr<mode>3): Also allow
	TARGET_MMX_WITH_SSE.  Add SSE emulation.
	(mmx_<shift_insn><mode>3): Likewise.
	(ashr<mode>3): New.
	(<shift_insn><mode>3): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_pmaddwd): Also allow TARGET_MMX_WITH_SSE.
	(*mmx_pmaddwd): Also allow TARGET_MMX_WITH_SSE.  Add SSE support.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_smulv4hi3_highpart): Also allow
	TARGET_MMX_WITH_SSE.
	(*mmx_smulv4hi3_highpart): Also allow TARGET_MMX_WITH_SSE. Add
	SSE support.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (mmx_mulv4hi3): Also allow
	TARGET_MMX_WITH_SSE.
	(mulv4hi3): New.
	(*mmx_mulv4hi3): Also allow TARGET_MMX_WITH_SSE.  Add SSE
	support.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/mmx.md (MMXMODEI8): Require TARGET_SSE2 for V1DI.
	(plusminus:mmx_<plusminus_insn><mode>3): Check
	TARGET_MMX_WITH_SSE.
	(sat_plusminus:mmx_<plusminus_insn><mode>3): Likewise.
	(<plusminus_insn><mode>3): New.
	(*mmx_<plusminus_insn><mode>3): Add SSE emulation.
	(*mmx_<plusminus_insn><mode>3): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/i386-expand.c (ix86_split_mmx_punpck): New function.
	* config/i386/i386-protos.h (ix86_split_mmx_punpck): New
	prototype.
	* config/i386/mmx.m (mmx_punpckhbw): Changed to
	define_insn_and_split to support SSE emulation.
	(mmx_punpcklbw): Likewise.
	(mmx_punpckhwd): Likewise.
	(mmx_punpcklwd): Likewise.
	(mmx_punpckhdq): Likewise.
	(mmx_punpckldq): Likewise.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>
	    Uros Bizjak  <ubizjak@gmail.com>

	PR target/89021
	* config/i386/i386-expand.c (ix86_move_vector_high_sse_to_mmx):
	New function.
	(ix86_split_mmx_pack): Likewise.
	* config/i386/i386-protos.h (ix86_move_vector_high_sse_to_mmx):
	New prototype.
	(ix86_split_mmx_pack): Likewise.
	* config/i386/i386.md (mmx_isa): New.
	(enabled): Also check mmx_isa.
	* config/i386/mmx.md (any_s_truncate): New code iterator.
	(s_trunsuffix): New code attr.
	(mmx_packsswb): Removed.
	(mmx_packssdw): Likewise.
	(mmx_packuswb): Likewise.
	(mmx_pack<s_trunsuffix>swb): New define_insn_and_split to emulate
	MMX packsswb/packuswb with SSE2.
	(mmx_packssdw): Likewise.
	* config/i386/predicates.md (register_mmxmem_operand): New.

2019-05-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89021
	* config/i386/i386-c.c (ix86_target_macros_internal): Define
	__MMX_WITH_SSE__ for TARGET_MMX_WITH_SSE.
	* config/i386/i386.c (ix86_set_reg_reg_cost): Add support for
	TARGET_MMX_WITH_SSE with VALID_MMX_REG_MODE.
	(ix86_vector_mode_supported_p): Likewise.
	* config/i386/i386.h (TARGET_MMX_WITH_SSE): New.

2019-05-15  Martin Liska  <mliska@suse.cz>

	PR middle-end/90478
	* tree-switch-conversion.c (jump_table_cluster::can_be_handled):
	Check for overflow.

2019-05-15  Richard Biener  <rguenther@suse.de>

	* tree-into-ssa.c (pass_build_ssa::execute): Run
	update_address_taken before going into SSA.

2019-05-15  Richard Biener  <rguenther@suse.de>

	* tree-pretty-print.c (dump_generic_node): Dump BIT_FIELD_REF
	as __BIT_FIELD_REF with type with -gimple.

2019-05-15  Vladislav Ivanishin  <vlad@ispras.ru>

	* tree-ssa-uninit.c (is_value_included_in): Remove is_unsigned and merge
	semantically equivalent branches (left over after prior refactorings).

2019-05-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88828
	* tree-ssa-forwprop.c (simplify_vector_constructor): Fix
	bogus check.

2019-05-14  Richard Biener  <rguenther@suse.de>

	* tree-pretty-print.c (dump_generic_node): Dump VIEW_CONVERT_EXPR
	as __VIEW_CONVERT with -gimple.

2019-05-12  Iain Sandoe  <iain@sandoe.co.uk>

	PR target/82920
	* config/i386/darwin.h (CC1_SPEC): Report -mx32 as an error for
	Darwin.

2019-05-14  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (eh_set_lr_<mode>): Merge with following
	define_split to become a define_insn_and_split.

2019-05-14  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-protos.h (rs6000_emit_epilogue): Change
	arguments.
	* config/rs6000/rs6000.c (rs6000_emit_epilogue): Change arguments.
	* config/rs6000/rs6000.md (epilogue_type): New define_enum.
	(sibcall_epilogue): Adjust.
	(epilogue): Adjust.

2019-05-14  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* config.gcc: Move *-*-solaris2.10* from obsolete configurations
	to unsupported ones.
	Simplify x86_64-*-solaris2.1[0-9]* to x86_64-*-solaris2*.
	* config.host: Likewise.
	* config/i386/sol2.h (ASM_COMMENT_START): Remove.
	* config/sparc/driver-sparc.c (host_detect_local_cpu) [__sun__ &&
	__svr4__]: Remove "brand" fallback.
	[!KSTAT_DATA_STRING]: Remove.
	* configure.ac (gcc_cv_ld_hidden): Simplify *-*-solaris2.1[0-9]*
	to *-*-solaris2*.
	(comdat_group): Likewise.
	(set_have_as_tls): Likewise.
	(gcc_cv_target_dl_iterate_phdr): Likewise.
	(gcc_cv_as_shf_merge): Remove Solaris 10/x86 workaround.
	(gcc_cv_ld_aligned_shf_merge): Remove Solaris 10/SPARC workaround.
	* configure: Regenerate.
	* doc/install.texi: Simplify Solaris target triplets.
	(Specific, i?86-*-solaris2*): Remove Solaris 10 references.
	(Specific, *-*-solaris2*): Document Solaris 10 removal.
	Remove Solaris 10 references.
	Remove obsolete Solaris bug reference.
	(Specific, sparc-sun-solaris2.10): Remove.

2019-05-14  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (any_div): New code iterator.
	(paired_mod): New code attribute.
	(sgnprefix): Handle DIV and UDIV RTXes.
	(u): Ditto.
	(<u>divmod<mode>4): Macroize expander from divmod<mode>4
	and udivmod<mode>4 patterns using any_div code iterator.
	(divmod splitters): Macroize splitters using any_div code iterator.
	(*udivmodsi4_pow2_zext_1): Use exactl_log2 in insn condition.
	(*udivmodsi4_pow2_zext_2): Ditto.
	(*<u>divmod<mode>4_noext): Macroize insn from *divmod<mode>4_noext
	and *udivmod<mode>4_noext patterns using any_div code iterator.
	(*<u>divmod<mode>4_noext_zext_1): Macroize insn from
	*divmod<mode>4_noext_zext_1 and *udivmod<mode>4_noext_zext_1
	patterns using any_div code iterator.
	(*<u>divmod<mode>4_noext_zext_2): Macroize insn from
	*divmod<mode>4_noext_zext_2 and *udivmod<mode>4_noext_zext_2
	patterns using any_div code iterator.
	(<u>divmodhiqi3): Macroize insn from divmodhiqi3 and
	udivmodhiqi3 patterns using any_extend code iterator.

2019-05-14  Richard Biener  <rguenther@suse.de>
	    H.J. Lu  <hongjiu.lu@intel.com>

	PR tree-optimization/88828
	* tree-ssa-forwprop.c (simplify_vector_constructor): Handle
	permuting in a single non-constant element not extracted
	from a vector.

2019-05-14  Przemyslaw Wirkus  <przemyslaw.wirkus@arm.com>

	* internal-fn.def (SIGNBIT): New.
	* config/aarch64/aarch64-simd.md (signbitv2sf2): New expand
	defined.
	(signbitv4sf2): Likewise.

2019-05-14  Chenghua Xu  <paul.hua.gm@gmail.com>

	PR target/90357
	* config/mips/mips.c (mips_split_move): Skip forward SRC into
	next insn when the SRC reg is dead.

2019-05-14  Bin Cheng  <bin.cheng@linux.alibaba.com>

	* gimple-ssa-strength-reduction.c (lookup_cand): Adjust index by 1.
	(alloc_cand_and_find_basis): Ditto.
	(backtrace_base_for_ref, create_mul_ssa_cand): Remove if-then-else.
	(create_mul_imm_cand, create_add_ssa_cand): Ditto.
	(create_add_imm_cand, slsr_process_cast): Ditto.
	(slsr_process_copy, replace_mult_candidate): Ditto.
	(replace_rhs_if_not_dup, replace_one_candidate): Ditto.
	(dump_cand_vec, analyze_candidates_and_replace): Skip NULL element.
	(pass_strength_reduction::execute): Init the first NULL element.

2019-05-13  Nathan Sidwell  <nathan@acm.org>

	* gcc.c (execute): Simplify cond-expr into if.  Reformat comment.
	(run_attempt): Reformat line break.

2019-05-13  David Edelsohn  <dje.gcc@gmail.com>

	PR target/90418
	* config/rs6000/rs6000.c (rs6000_emit_epilogue): Don't load EH
	data registers in sibcall epilogues.
	Don't add EH_RETURN_STACKADJ_RTX to sp in sibcall epilogues.

2019-05-13  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89221
	* configure.ac (--enable-frame-pointer):
	Disable by default for cygwin and mingw.
	* configure: Regenerate.

2019-05-13  Nathan Sidwell  <nathan@acm.org>

	* dwarf2out.c (breakout_comdat_types): Move comment to correct
	piece of code.
	(const_ok_for_output_1): Balance parens around #if/#else/#endif
	(gen_member_die): Move abstract origin check earlier.  Only VARs
	can be static_inline_p.  Simplify splicing control flow.

2019-05-13  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_get_and_check_slp_defs): Handle
	VIEW_CONVERT_EXPR.
	(vect_build_slp_tree_1): Likewise.

2019-05-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90402
	* tree-if-conv.c (tree_if_conversion): Value number only
	the loop body by making the latch an exit of the region
	as well.
	* tree-ssa-sccvn.c (process_bb): Add flag whether to skip
	processing PHIs.
	(do_rpo_vn): Deal with multiple edges into the entry block
	that are not backedges inside the region by skipping PHIs
	of the entry block.

2019-05-13  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90316
	* tree-ssa-pre.c (insert_aux): Fold into ...
	(insert): ... this function.  Use a RPO walk to reduce the
	number of required iterations.

2019-05-13  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/90416
	* tree-vect-stmts.c (vect_check_load_store_mask): Concatenate
	string instead of passing the second part as va_arg argument.

2019-05-13  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/90380
	* gcov.c (handle_cycle): Do not support zero cycle count,
	it should not be possible.
	(path_contains_zero_cycle_arc): New function.
	(circuit): Ignore zero cycle arc counts.

2019-05-13  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/90380
	* gcov.c (enum loop_type): Remove the enum and
	the operator.
	(handle_cycle): Assert that we should not reach
	a negative count.
	(circuit): Use loop_found instead of a tri-state loop_type.
	(get_cycles_count): Do not handle NEGATIVE_LOOP as it can't
	happen.

2019-05-12  Iain Sandoe  <iain@sandoe.co.uk>

	PR target/82920
	* config/i386/i386.c (ix86_output_jmp_thunk_or_indirect): New.
	(ix86_output_indirect_branch_via_reg): Use output mechanism
	accounting for __USER_LABEL_PREFIX__.
	(ix86_output_indirect_branch_via_push): Likewise.
	(ix86_output_function_return): Likewise.
	(ix86_output_indirect_function_return): Likewise.

2019-05-12  Richard Sandiford  <richard.sandiford@arm.com>

	* doc/md.texi: Document use of code attributes in rtx patterns.
	* read-md.h (rtx_reader::rtx_alloc_for_name): New member function.
	* read-rtl.c (find_code): Split out search loops into...
	(maybe_find_code): ...this new function.
	(check_code_iterator): Make the error message more informative.
	(check_code_attribute): New function.
	(rtx_reader::rtx_alloc_for_name): Likewise.
	(rtx_reader::read_rtx_code): Use rtx_alloc_for_name.
	* config/aarch64/predicates.md (aarch64_smin, aarch64_umin): Delete.
	* config/aarch64/aarch64-simd.md (*aarch64_<su>abd<mode>_3): Use
	<max_opp> directly as an rtx code instead of via a match_operator.
	* config/aarch64/aarch64-sve.md (aarch64_<su>abd<mode>_3): Likewise.
	(<su>abd<mode>_3): Update accordingly.

2019-05-12  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.c (debug_stack_info): When -mdebug=stack
	is given, print the state of the EH "save world" computation for
	Darwin.

2019-05-11  Jakub Jelinek  <jakub@redhat.com>

	PR c++/59813
	* config/aarch64/aarch64.c (aarch64_expand_epilogue): Don't add
	EH_RETURN_STACKADJ_RTX to sp in sibcall epilogues.

2019-05-11  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (floatdi<X87MODEF:mode>2_i387_with_xmm):
	Use pinsrd for TARGET_SSE4_1.
	* config/i386/sse.md (movdi_to_sse): Ditto.

2019-05-10  Richard Biener  <rguenther@suse.de>

	* tree-ssa-sccvn.c (visit_reference_op_call): Initialize value-id.
	(do_rpo_vn): Initialize next_value_id.

2019-05-10  Martin Liska  <mliska@suse.cz>

	* params.def (PARAM_GIMPLE_FE_COMPUTED_HOT_BB_THRESHOLD):
	Fix plural form.

2019-05-10  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/90385
	* tree-parloops.c (try_create_reduction_list): Punt on non-SSA_NAME
	arguments of the exit phis.

	PR c++/90383
	* tree-inline.h (struct copy_body_data): Add do_not_fold member.
	* tree-inline.c (remap_gimple_op_r): Avoid folding expressions if
	id->do_not_fold.
	(copy_tree_body_r): Likewise.
	(copy_fn): Set id.do_not_fold to true.

2019-05-10  Martin Liska  <mliska@suse.cz>

	* config/i386/i386-expand.c (ix86_expand_floorceildf_32):
	Reapply changes from r269790.

2019-05-10  Martin Liska  <mliska@suse.cz>

	PR middle-end/90340
	* doc/invoke.texi: New params.
	* params.def (PARAM_JUMP_TABLE_MAX_GROWTH_RATIO_FOR_SIZE): New.
	(PARAM_JUMP_TABLE_MAX_GROWTH_RATIO_FOR_SPEED): Likewise.
	* tree-switch-conversion.c (jump_table_cluster::can_be_handled):
	Use it.
	* tree-switch-conversion.h (struct jump_table_cluster):
	Likewise.

2019-05-09  Segher Boessenkool  <segher@kernel.crashing.org>

	* combine.c (combine_simplify_rtx): Don't make IF_THEN_ELSE RTL.

2019-05-09  Bill Schmidt  <wschmidt@linux.ibm.com>

	* doc/loop.texi: Remove reference to FOR_EACH_LOOP_BREAK.

2019-05-09  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/88879
	* sel-sched.c (sel_target_adjust_priority): Remove assert.

2019-05-09  Richard Earnshaw  <rearnsha@arm.com>

	PR target/90405
	* config/arm/arm.c (callee_saved_reg_p): Move before
	thumb_find_work_register.
	(thumb1_prologue_unused_call_clobbered_lo_regs): Move before
	thumb_find_work_register.  Only call df_get_live_out once.
	(thumb1_epilogue_unused_call_clobbered_lo_regs): Likewise.
	(thumb_find_work_register): Use
	thumb1_prologue_unused_call_clobbered_lo_regs instead of ad hoc
	algorithms to locate a spare call clobbered reg.

2019-05-09  Martin Liska  <mliska@suse.cz>

	* gimple-pretty-print.c (dump_binary_rhs): Dump MIN_EXPR
	and MAX_EXPR in GIMPLE FE format.

2019-05-09  Martin Liska  <mliska@suse.cz>

	* tree-cfg.c (dump_function_to_file): Dump entry BB count.
	* gimple-pretty-print.c (dump_gimple_bb_header):
	Dump BB count.
	(pp_cfg_jump): Dump edge probability.
	* profile-count.c (profile_quality_as_string): Simplify
	with a static array.
	(parse_profile_quality): New function.
	(profile_count::dump): Simplify with a static array.
	(profile_count::from_gcov_type): Add new argument.
	* profile-count.h (parse_profile_quality): Likewise.
	* predict.h (set_hot_bb_threshold): New.
	* params.def (PARAM_GIMPLE_FE_COMPUTED_HOT_BB_THRESHOLD):
	New param.
	* predict.c (get_hot_bb_threshold): Set from the new param.
	(set_hot_bb_threshold): New.

2019-05-09  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90395
	* tree-ssa-forwprop.c (pass_forwprop::execute): Do not
	rewrite vector stores that throw internally.

2019-05-09  Thomas Schwinge  <thomas@codesourcery.com>

	* cif-code.def (CHKP): Remove.

	PR target/89221
	* configure.ac (--enable-frame-pointer): Disable by default for
	GNU systems.
	* configure: Regenerate.

2019-05-09  Alan Modra  <amodra@gmail.com>

	PR target/89271
	* config/rs6000/rs6000.h (enum reg_class, REG_CLASS_NAMES),
	(REG_CLASS_CONTENTS): Add GEN_OR_VSX_REGS class.
	* config/rs6000/rs6000.c (rs6000_register_move_cost): Correct
	cost for general <-> vsx when direct moves are available.
	Cost union classes at minimal cost for any reg in the class.
	Correct calculation for moves between vsx, float, and altivec.
	Don't return a low cost for moves between special regs.  Don't
	use hard coded register numbers.
	(TARGET_IRA_CHANGE_PSEUDO_ALLOCNO_CLASS): Define.
	(rs6000_ira_change_pseudo_allocno_class): New function.
	* config/rs6000/rs6000.md (movsi_internal1, mov<mode>_internal),
	(movdi_internal32, movdi_internal64): Remove '*' from vsx register
	alternatives.
	(movsi_internal1): Don't disparage vector alternatives.
	(mov<mode>_internal): Likewise, excepting alternative that
	will be split.
	* config/rs6000/vsx.md (vsx_splat_<mode>_reg): Don't disparage
	we <- b alternative.

2019-05-08  Jakub Jelinek  <jakub@redhat.com>

	PR c++/59813
	PR tree-optimization/89060
	* tree-ssa-live.h (live_vars_map): New typedef.
	(compute_live_vars, live_vars_at_stmt, destroy_live_vars): Declare.
	* tree-ssa-live.c: Include gimple-walk.h and cfganal.h.
	(struct compute_live_vars_data): New type.
	(compute_live_vars_visit, compute_live_vars_1, compute_live_vars,
	live_vars_at_stmt, destroy_live_vars): New functions.
	* tree-tailcall.c: Include tree-ssa-live.h.
	(live_vars, live_vars_vec): New global variables.
	(find_tail_calls): Perform variable life analysis before punting.
	(tree_optimize_tail_calls_1): Clean up live_vars and live_vars_vec.
	* tree-inline.h (struct copy_body_data): Add eh_landing_pad_dest
	member.
	* tree-inline.c (add_clobbers_to_eh_landing_pad): Remove BB argument.
	Perform variable life analysis to select variables that really need
	clobbers added.
	(copy_edges_for_bb): Don't call add_clobbers_to_eh_landing_pad here,
	instead set id->eh_landing_pad_dest and assert it is the same.
	(copy_cfg_body): Call it here if id->eh_landing_pad_dest is non-NULL.

2019-05-08  Mihail Ionescu  <mihail.ionescu@arm.com>
	    Richard Earnshaw  <rearnsha@arm.com>

	PR target/88167
	* config/arm/arm.c (thumb1_prologue_unused_call_clobbered_lo_regs): New
	function.
	(thumb1_epilogue_unused_call_clobbered_lo_regs): New function.
	(thumb1_compute_save_core_reg_mask): Don't force a spare work
	register if both the epilogue and prologue can use call-clobbered
	regs.
	(thumb1_unexpanded_epilogue): Use
	thumb1_epilogue_unused_call_clobbered_lo_regs.  Reverse the logic for
	picking temporaries for restoring high regs to match that of the
	prologue where possible.
	(thumb1_expand_prologue): Add any usable call-clobbered low registers to
	the list of work registers.  Detect if the return address is still live
	at the end of the prologue and avoid using it for a work register if so.
	If the return address is not live, add LR to the list of pushable regs
	after the first pass.

2019-05-08  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/90078
	* tree-ssa-loop-ivopts.c (inttypes.h): Include new header file.
	(INFTY): Increase the value for infinite cost.
	(struct comp_cost): Promote type of members to int64_t.
	(infinite_cost): Don't set complexity in initialization.
	(comp_cost::operator +,-,+=,-+,/=,*=): Assert when cost computation
	overflows to infinite_cost.
	(adjust_setup_cost): Promote type of parameter and cost computation
	to int64_t.
	(struct ainc_cost_data, struct iv_ca): Promote type of member to
	int64_t.
	(get_scaled_computation_cost_at, determine_iv_cost): Promote type of
	cost computation to int64_t.
	(determine_group_iv_costs, iv_ca_dump, find_optimal_iv_set): Use
	int64_t's format specifier in dump.

2019-05-08  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/90240
	* tree-ssa-loop-ivopts.c (get_scaled_computation_cost_at): Scale cost
	with respect to scaling factor pre-computed for each basic block.
	(try_improve_iv_set): Return bool if best_cost equals to iv_ca cost.
	(find_optimal_iv_set_1): Free iv_ca set if it has infinite_cost.
	(COST_SCALING_FACTOR_BOUND, determine_scaling_factor): New.
	(tree_ssa_iv_optimize_loop): Call determine_scaling_factor.  Extend
	live range for array of loop's basic blocks.  Cleanup aux field of
	loop's basic blocks.

2019-05-08  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/90356
	* match.pd ((X +/- 0.0) +/- 0.0): Optimize into X +/- 0.0 if possible.

2019-05-07  Wei Xiao  <wei3.xiao@intel.com>

	* common/config/i386/i386-common.c (OPTION_MASK_ISA_AVX512BF16_SET
	OPTION_MASK_ISA_AVX512BF16_UNSET, OPTION_MASK_ISA2_AVX512BW_UNSET): New.
	(OPTION_MASK_ISA2_AVX512F_UNSET): Add OPTION_MASK_ISA_AVX512BF16_UNSET.
	(ix86_handle_option): Handle -mavx512bf16.
	* config.gcc: Add avx512bf16vlintrin.h and avx512bf16intrin.h
	to extra_headers.
	* config/i386/avx512bf16vlintrin.h: New.
	* config/i386/avx512bf16intrin.h: New.
	* config/i386/cpuid.h (bit_AVX512BF16): New.
	* config/i386/driver-i386.c (host_detect_local_cpu): Detect BF16.
	* config/i386/i386-builtin-types.def: Add new types.
	* config/i386/i386-builtin.def: Add new builtins.
	* config/i386/i386-c.c (ix86_target_macros_internal): Define
	__AVX512BF16__.
	* config/i386/i386-option.c (ix86_target_string): Add -mavx512bf16.
	(ix86_option_override_internal): Handle BF16.
	(ix86_valid_target_attribute_inner_p): Ditto.
	* config/i386/i386-expand.c (ix86_expand_args_builtin): Ditto.
	* config/i386/i386-builtin.c (enum processor_features): Add
	F_AVX512BF16.
	(static const _isa_names_table isa_names_table): Ditto.
	* config/i386/i386.h (TARGET_AVX512BF16, TARGET_AVX512BF16_P): New.
	(PTA_AVX512BF16): Ditto.
	* config/i386/i386.opt: Add -mavx512bf16.
	* config/i386/immintrin.h: Include avx512bf16intrin.h
	and avx512bf16vlintrin.h.
	* config/i386/sse.md (avx512f_cvtne2ps2bf16_<mode><mask_name>,
	avx512f_cvtneps2bf16_<mode><mask_name>,
	avx512f_dpbf16ps_<mode><mask_half_name>): New define_insn patterns.
	* config/i386/subst.md (mask_half): Add new subst.
	* doc/invoke.texi: Document -mavx512bf16.

2019-05-07  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000-protos.h (rs6000_legitimize_reload_address_ptr):
	Delete declaration.
	* config/rs6000/rs6000.c (rs6000_legitimize_reload_address): Delete.
	(rs6000_debug_legitimize_reload_address): Delete.
	(rs6000_legitimize_reload_address_ptr): Delete.
	(rs6000_option_override_internal): Adjust.
	(mem_operand_gpr): Adjust comment.
	(legitimate_lo_sum_address_p): Ditto.
	(rs6000_legitimize_reload_address): Delete.
	(rs6000_debug_legitimize_reload_address): Delete.
	* config/rs6000/rs6000.h (LEGITIMIZE_RELOAD_ADDRESS): Delete.

2019-05-07  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	PR target/89765
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
	In handling of ALTIVEC_BUILTIN_VEC_INSERT, use modular arithmetic
	to compute vector element selector for both constant and variable
	operands.

2019-05-07  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.md (cvt_mnemonic): New mode attribute.
	(ashr<mode>3_cvt): Merge insn pattern from ashrsi3_cvt and
	ashrdi3_cvt using SWI48 mode iterator.

2019-05-07  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	* config/aarch64/aarch64-sve.md (<su>abd<mode>_3): New define_expand.
	(aarch64_<su>abd<mode>_3): Likewise.
	(*aarch64_<su>abd<mode>_3): New define_insn.
	(<sur>sad<vsi2qi>): New define_expand.
	* config/aarch64/iterators.md: Added MAX_OPP attribute.
	* tree-vect-loop.c (use_mask_by_cond_expr_p): Add SAD_EXPR.
	(build_vect_cond_expr): Likewise.

2019-05-07  Uroš Bizjak  <ubizjak@gmail.com>

	* cfgexpand.c (asm_clobber_reg_is_valid): Reject
	clobbers outside of accessible_reg_set.
	* config/i386/i386.c (ix86_conditional_register_usage):
	Disable register sets by clearing corresponding bits in
	accessible_reg_set.  Do not set corresponding bits in fixed_regs,
	call_used_regs and don't clear corresponding reg_names array members.

2019-05-07  Richard Biener  <rguenther@suse.de>

	* tree-vect-stmts.c (vect_is_simple_cond): When vectype is
	not specified still compute a comp_vectype for invariant
	compares.

2019-05-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90316
	* tree-ssa-pre.c (translate_vuse_through_block): When
	same_valid is NULL do not bother to search for a virtual
	PHI continuation.
	(phi_translate_1): When operands changed we cannot keep
	the same value-number so do not bother to ask whether
	that's possible from translate_vuse_through_block.

2019-05-07  Martin Liska  <mliska@suse.cz>

	* bitmap.c (bitmap_register): Come up with
	alloc_descriptor_max_uid and assign it for
	a new bitmap.
	(register_overhead): Use get_descriptor as
	a descriptor.
	(release_overhead): New.
	(bitmap_elem_to_freelist): Call it.
	(bitmap_elt_clear_from): Likewise.
	(bitmap_obstack_free): Likewise.
	(bitmap_move): Sensitively release memory.
	* bitmap.h (struct GTY): Add alloc_descriptor and padding.
	(bitmap_initialize): Initialize alloc_descriptor to zero.
	* tree-ssa-pre.c (do_hoist_insertion): Use bitmap_move.

2019-05-07  Richard Biener  <rguenther@suse.de>

	* tree-vect-slp.c (vect_build_slp_tree_2): Bump size whenever
	we build a SLP node.  Remove max_size and limiting.
	(vect_analyze_slp_instance): Record and dump size of the SLP graph.

2019-05-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90316
	* tree-ssa-alias.h (get_continuation_for_phi): Take walking
	limit by reference.
	(walk_non_aliased_vuses): Take walking limit argument.
	* tree-ssa-alias.c (maybe_skip_until): Take limit and abort
	walking if it is reached instead of just counting.
	(get_continuation_for_phi): Likewise.
	(walk_non_aliased_vuses): Likewise, instead of leaving counter
	limiting to the callback.
	* tree-ssa-sccvn.c (vn_reference_lookup_2): Adjust.
	(vn_reference_lookup_3): Likewise.
	(vn_reference_lookup_pieces): Likewise.
	(vn_reference_lookup): Likewise.
	* tree-ssa-pre.c (translate_vuse_through_block): Limit walking.
	* tree-ssa-scopedtables.c (vuse_eq): Adjust.
	(avail_exprs_stack::lookup_avail_expr): Likewise.

2019-05-07  Jan Hubicka  <hubicka@ucw.cz>

	* tree-ssa-alias.c (aliasing_component_refs_p): Continue looking
	for comparaible types in the second direction even if first one
	hits incomparable type.

2019-05-07  Richard Biener  <rguenther@suse.de>

	PR lto/90369
	* lto-wrapper.c (debug_objcopy): Use the original filename
	including archive offset for the filename used for -save-temps.

2019-05-07  Li Jia He  <helijia@linux.ibm.com>

	* tree-ssa-phiopt.c (two_value_replacement): Fix a typo in parameter
	detection.

2019-05-06  H.J. Lu  <hongjiu.lu@intel.com>
	    Hongtao Liu  <hongtao.liu@intel.com>

	PR target/89750
	PR target/86444
	* config/i386/i386-expand.c (ix86_expand_sse_comi_round):
	Modified, original implementation isn't correct.

2019-05-06  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (FIRST_ALTIVEC_REGNO, LAST_ALTIVEC_REGNO)
	(LR_REGNO, CTR_REGNO, CA_REGNO, ARG_POINTER_REGNUM, CR0_REGNO)
	(CR1_REGNO, CR2_REGNO, CR3_REGNO, CR4_REGNO, CR5_REGNO, CR6_REGNO)
	(CR7_REGNO, MAX_CR_REGNO, VRSAVE_REGNO, VSCR_REGNO)
	(FRAME_POINTER_REGNUM): Change numbering.
	* config/rs6000/rs6000.c (rs6000_reg_names): Adjust.
	(alt_reg_names): Adjust.
	(rs6000_conditional_register_usage): Don't mark hard register 64 as
	fixed.
	* config/rs6000/rs6000.h (FIRST_PSEUDO_REGISTER): Adjust.
	(DWARF_FRAME_REGISTERS): Delete.
	(DWARF2_FRAME_REG_OUT): Fix whitespace.
	(FIXED_REGISTERS, CALL_USED_REGISTERS, CALL_REALLY_USED_REGISTERS):
	Adjust.
	(REG_ALLOC_ORDER): Adjust.
	(FRAME_POINTER_REGNUM, ARG_POINTER_REGNUM): Adjust.
	(REG_CLASS_CONTENTS): Adjust.
	(RETURN_ADDR_RTX): Change comment.
	(REGNO_OK_FOR_INDEX_P, REGNO_OK_FOR_BASE_P): Use ARG_POINTER_REGNUM
	instead of 67.
	(REGISTER_NAMES): Adjust.
	(ADDITIONAL_REGISTER_NAMES): Adjust.
	* config/rs6000/darwin.h (REGISTER_NAMES): Adjust.

2019-05-06  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.md (TFHAR_REGNO, TFIAR_REGNO, TEXASR_REGNO):
	Delete.
	* config/rs6000/rs6000.h (FIRST_PSEUDO_REGISTER): Adjust.
	(DWARF_FRAME_REGISTERS): Adjust.
	(FIXED_REGISTERS, CALL_USED_REGISTERS, CALL_REALLY_USED_REGISTERS):
	Adjust.
	(REG_ALLOC_ORDER): Adjust.
	(enum reg_class): Delete SPR_REGS.
	(REG_CLASS_NAMES): Delete SPR_REGS.
	(REG_CLASS_CONTENTS): Delete SPR_REGS.  Adjust for deleted TM regs.
	(REGISTER_NAMES): Adjust.
	(ADDITIONAL_REGISTER_NAMES): Adjust.
	* config/rs6000/darwin.h (REGISTER_NAMES): Adjust.
	* config/rs6000/htm.md (htm_mfspr_<mode>, htm_mtspr_<mode>): Adjust.
	* config/rs6000/predicates.md (htm_spr_reg_operand): Delete.
	* config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): Adjust.
	(htm_spr_regno): Delete.
	(htm_expand_builtin): Adjust: the HTM builtins now have one fewer
	argument.
	(rs6000_dbx_register_number): Adjust.

2019-05-06  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.h (PRE_GCC3_DWARF_FRAME_REGISTERS): Delete.

2019-05-06  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_dbx_register_number): Handle
	FRAME_POINTER_REGNUM, ARG_POINTER_REGNUM, and 64 (which was MQ).

2019-05-06  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/88709
	PR tree-optimization/90271
	* params.def (PARAM_STORE_MERGING_MAX_SIZE): New parameter.
	* gimple-ssa-store-merging.c (encode_tree_to_bitpos): Handle
	non-clobber CONSTRUCTORs with no elts.  Remove useless tmp_int
	variable.
	(imm_store_chain_info::coalesce_immediate_stores): Punt if the size
	of the store merging group is larger than
	PARAM_STORE_MERGING_MAX_SIZE parameter.
	(split_group): Add bzero_first argument.  If set, always emit first
	the first store which must be = {} of the whole area and then for the
	rest of the stores consider all zero bytes as paddings.
	(imm_store_chain_info::output_merged_store): Check if first store
	is = {} of the whole area and if yes, determine which setting of
	bzero_first for split_group gives smaller number of stores.  Adjust
	split_group callers.
	(lhs_valid_for_store_merging_p): Allow decls.
	(rhs_valid_for_store_merging_p): Allow non-clobber CONTRUCTORs with
	no elts.
	(pass_store_merging::process_store): Likewise.

2019-05-06  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	PR target/89424
	* config/rs6000/rs6000.c (rs6000_expand_vector_extract): Add
	handling of V1TImode.

2019-05-06  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89221
	* config.gcc (i[34567]86-*-*, x86_64-*-*): Move tests for enable_cld
	and enable_frame_pointer ...
	* configure.ac: ... here.  Update help strings for
	--enable-frame-pointer.
	* configure: Regenerate.
	* config/i386/i386-options.c (ix86_option_override_internal): Remove
	USE_X86_64_FRAME_POINTER define, use USE_IX86_FRAME_POINTER instead.
	* config/i386/sol2.h (USE_IX86_FRAME_POINTER): Remove.
	(USE_X86_64_FRAME_POINTER): Ditto.

2019-05-06  Martin Liska  <mliska@suse.cz>

	* config.gcc: Append to target_gtfiles and fix indentation.

2019-05-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90358
	* tree-vect-stmts.c (get_group_load_store_type): Properly
	detect unused upper half of load.
	(vectorizable_load): Likewise.

2019-05-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88828
	* tree-ssa-forwprop.c (get_bit_field_ref_def): Split out from...
	(simplify_vector_constructor): ...here.  Handle constants in
	the constructor.

2019-05-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90328
	* tree-data-ref.h (dr_may_alias_p): Pass in the actual loop nest.
	* tree-data-ref.c (dr_may_alias_p): Check whether the clique
	is valid in the loop nest before using it.
	(initialize_data_dependence_relation): Adjust.
	* graphite-scop-detection.c (build_alias_set): Pass the SCOP enclosing
	loop as loop-nest to dr_may_alias_p.

2019-05-06  Richard Biener  <rguenther@suse.de>

	* dwarf2out.c (mem_loc_descriptor): Initialize int_mode.

2019-05-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90316
	* tree-ssa-alias.c (maybe_skip_until): Pass in target BB,
	compute target on demand.
	(get_continuation_for_phi): Remove code walking stmts to
	get to a target virtual operand which could end up being
	quadratic.

2019-05-06  Martin Liska  <mliska@suse.cz>

	PR sanitizer/90312
	* config/i386/i386-options.c (ix86_option_override_internal): Error only
	when -mabi is selected to a non-default version.

2019-05-06  Hrishikesh Kulkarni  <hrishikeshparag@gmail.com>
	    Martin Liska  <mliska@suse.cz>

	* Makefile.in: Add lto-dump.texi.
	* cgraph.h: Add new functions get_visibility_string and
	get_symtab_type_string.
	* doc/gcc.texi: Include lto-dump section.
	* doc/lto-dump.texi: New file.
	* dumpfile.c (dump_switch_p_1): Use parse_dump_option.
	(parse_dump_option): Factor out this function.
	* dumpfile.h (enum dump_flag): Add new value TDF_ERROR.
	(parse_dump_option): Export the function.
	* symtab.c (symtab_node::get_visibility_string): New function.
	(symtab_node::get_symtab_type_string): Likewise.

2019-05-06  Martin Liska  <mliska@suse.cz>

	* config/i386/i386-builtins.c: New file.
	* config/i386/i386-builtins.h: New file.
	* config/i386/i386-expand.c: New file.
	* config/i386/i386-expand.h: New file.
	* config/i386/i386-features.c: New file.
	* config/i386/i386-features.h: New file.
	* config/i386/i386-options.c: New file.
	* config/i386/i386-options.h: New file.
	* config.gcc: Add new files into extra_objs and
	target_gtfiles.
	* config/i386/i386.c: Split content of the file
	into newly introduced files.
	* config/i386/i386.h: Declare common variables
	and macros.
	* config/i386/t-i386: Define dependencies for new files.

2019-05-03  Richard Earnshaw  <rearnsha@arm.com>

	PR target/89400
	* config/arm/arm.md (unaligned_loadsi): Add variant for thumb1.
	Restrict 'all' variant to 32-bit configurations.
	(unaligned_loadhiu): Likewise.
	(unaligned_storehi): Likewise.
	(unaligned_storesi): Likewise.
	(unaligned_loadhis): Disable when compiling for thumb1.

2019-05-03  Marc Glisse  <marc.glisse@inria.fr>

	PR tree-optimization/90269
	* tree-loop-distribution.c (find_seed_stmts_for_distribution):
	Ignore clobbers.

2019-05-03  Martin Liska  <mliska@suse.cz>

	* hash-map.h: Add is_empty function.
	* hash-set.h: Likewise.
	* hash-table.h: Likewise.
	* dwarf2out.c (dwarf2out_finish): Use is_empty instead of
	elements () == 0 (and similar usages).
	* gimple-ssa-store-merging.c (pass_store_merging::terminate_and_process_all_chains): Likewise.
	* gimplify.c (gimplify_bind_expr): Likewise.
	(gimplify_switch_expr): Likewise.
	* hash-map-tests.c (test_map_of_strings_to_int): Likewise.
	* ipa-icf.c (sem_item_optimizer::remove_symtab_node): Likewise.
	* postreload-gcse.c (dump_hash_table): Likewise.
	(gcse_after_reload_main): Likewise.
	* predict.c (combine_predictions_for_bb): Likewise.
	* tree-parloops.c (reduction_phi): Likewise.
	(separate_decls_in_region): Likewise.
	(transform_to_exit_first_loop): Likewise.
	(gen_parallel_loop): Likewise.
	(gather_scalar_reductions): Likewise.
	(try_create_reduction_list): Likewise.
	* var-tracking.c (dump_vars): Likewise.
	(emit_notes_for_changes): Likewise.
	(vt_emit_notes): Likewise.

2019-05-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90316
	* tree-ssa-pre.c (pass_pre::execute): Re-compute DOM fast queries
	before running VN.

2019-05-03  Richard Biener  <rguenther@suse.de>

	* tree-vect-stmts.c (get_group_load_store_type): Avoid
	peeling for gaps by loading only lower halves of vectors
	if possible.
	(vectorizable_load): Likewise.

2019-05-03  Richard Biener  <rguenther@suse.de>

	PR middle-end/89518
	* match.pd: Add pattern to optimize (A / B) * B + (A % B) to A.

2019-05-03  Richard Biener  <rguenther@suse.de>

	PR middle-end/87314
	* match.pd (cmp (convert1?@2 addr@0) (convert2? addr@1)):
	Handle STRING_CST vs DECL or STRING_CST.

2019-05-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88963
	* tree-ssa-forwprop.c (pass_forwprop::execute): Rewrite
	vector loads feeding only BIT_FIELD_REFs to component
	loads.  Rewrite stores fed by CONSTRUCTORs to component
	stores.

2019-05-03  Jakub Jelinek  <jakub@redhat.com>

	* opts.h (finish_options): Remove lang_mask argument.
	(print_help, help_option_argument): Declare.
	* opts.c (print_help): Remove forward declaration, no longer static.
	(finish_options): Remove lang_mask argument, don't call print_help
	here.
	* opts-global.c (decode_options): Adjust finish_option caller, call
	print_help here.

	PR tree-optimization/90303
	* ipa-devirt.c (obj_type_ref_class, get_odr_type): Don't use
	TYPE_CANONICAL for TYPE_STRUCTURAL_EQUALITY_P types in !in_lto_p mode.

2019-05-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89698
	* gimple-fold.c (canonicalize_constructor_val): Early out
	for constants, handle unfolded INTEGER_CSTs as they appear in
	C++ virtual table ctors.

2019-05-03  Richard Biener  <rguenther@suse.de>

	* passes.c (execute_function_todo): Remove dead code.

2019-05-02  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_dbx_register_number): Do not use
	the internal register number, for any "real" register.

2019-05-02  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_dbx_register_number): Return the
	correct numbers for TFHAR, TFIAR, TEXASR.

2019-05-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89653
	* tree-ssa-loop.c (pass_data_tree_loop_init): Execute
	update-address-taken before the pass.
	* passes.def (pass_tree_loop_init): Put comment before it.

2019-05-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89509
	* tree-ssa-structalias.c (compute_dependence_clique): Look
	at the first subvar when determining whether it is restrict.

2019-05-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90273
	* tree-ssa-dce.c (eliminate_unnecessary_stmts): Eliminate
	useless debug stmts.

2019-05-02  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	* config/aarch64/aarch64-sve.md (<sur>dot_prod<vsi2qi>): Taken from SVE
	ACLE branch.
	* config/aarch64/iterators.md: Copied Vetype_fourth, VSI2QI and vsi2qi from
	SVE ACLE branch.
	* tree-vect-loop.c (use_mask_by_cond_expr_p): New function to check if a
	VEC_COND_EXPR be inserted to emulate a conditional internal function.
	(build_vect_cond_expr): Emit the VEC_COND_EXPR.
	(vectorizable_reduction): Use the functions above to vectorize in a
	fully masked loop codes that don't have a conditional internal
	function.

2019-05-02  Martin Liska  <mliska@suse.cz>

	* cgraphclones.c: Call valid_attribute_p with 1 for
	target_clone.
	* config/i386/i386-c.c (ix86_pragma_target_parse): Use 0 as
	it's for target attribute.
	* config/i386/i386-protos.h (ix86_valid_target_attribute_tree):
	Add new boolean argument.
	* config/i386/i386.c (ix86_valid_target_attribute_inner_p):
	Likewise.
	(ix86_valid_target_attribute_tree): Pass target_clone_attr
	to ix86_valid_target_attribute_inner_p.
	(ix86_valid_target_attribute_p): Pass flags argument to
	ix86_valid_target_attribute_inner_p.
	(get_builtin_code_for_version): Use 0 as it's target attribute.

2019-05-02  Martin Liska  <mliska@suse.cz>

	* gcc.c (process_command): Add dummy file only
	if n_infiles == 0.
	* opts-global.c (decode_options): Pass lang_mask.
	* opts.c (print_help): New function.
	(finish_options): Print --help if help_option_argument
	is set.
	(common_handle_option): Factor out content of OPT__help_
	into print_help.
	* opts.h (finish_options): Add new argument.

2019-05-02  Martin Liska  <mliska@suse.cz>

	PR target/88809
	* config/i386/i386.c (ix86_expand_strlen): Use strlen call.
	With -minline-all-stringops use inline expansion using 4B loop.
	* doc/invoke.texi: Document the change of
	-minline-all-stringops.

2019-05-01  Jeff Law  <law@redhat.com>

	PR tree-optimization/88797
	* gimple-ssa-split-paths (is_feasible_trace): Reject cases where the
	PHI feeds a conditional on the RHS of an assignment.

2019-04-30  Andrew Waterman  <andrew@sifive.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/constraints.md (L): New.
	* config/riscv/predicates.md (lui_operand): New.
	(sfb_alu_operand): New.
	* config/riscv/riscv-protos.h (riscv_expand_conditional_move): Declare.
	* config/riscv/riscv.c (riscv_expand_conditional_move): New.
	* config/riscv/riscv.h (TARGET_SFB_ALU): New.
	* config/riscv/risc.md (type): Add sfb_alu.
	(branch<mode>): Renamed from branch_order<mode>.  Change predicate for
	operand 3 to reg_or_0_operand.  In output string, change %3 to %z3.
	(branch_zero<mode>): Delete.
	(mov<mode>cc): New.
	(mov<GPR:mode><X:mode>cc): Likewise.
	* config/riscv/sifive-7.md (sifive_7_sfb_alu): New.  Use in bypasses.

2019-04-30  Nathan Sidwell  <nathan@acm.org>

	* tree.h (MARK_TS_EXP): New.

2019-04-30  Martin Liska  <mliska@suse.cz>

	* opts.c (enable_warning_as_error): Provide hints
	for unknown options.

2019-04-30  Martin Liska  <mliska@suse.cz>

	PR debug/90288
	* doc/invoke.texi: Add missing dash for gas-locview-support
	and gno-as-locview-support.

2019-04-30  Jakub Jelinek  <jakub@redhat.com>

	PR target/89093
	* config/aarch64/aarch64.c (aarch64_process_one_target_attr): Don't skip
	whitespace at the start of target attribute string.

2019-04-30  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	PR target/86538
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	Define __ARM_FEATURE_ATOMICS.

2019-04-30  Martin Liska  <mliska@suse.cz>

	* gimple-fold.c (gimple_fold_builtin_memory_op): Change endp
	into built_in_function enum. Remove code for endp == 2 and
	use BUILT_IN_* constants.
	(gimple_fold_builtin): Call the function with fcode.

2019-04-30  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c (ix86_builtin_reciprocal): Cast
	DECL_FUNCTION_CODE into ix86_builtins enum before
	the switch statement.

2019-04-30  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89475
	* tree-ssa-ccp.c (evaluate_stmt): Handle BUILT_IN_BSWAP{16,32,64}
	calls.

2019-04-30  Martin Liska  <mliska@suse.cz>

	PR translation/90274
	* opts.c (print_filtered_help): Wrap string in _(...).

2019-04-30  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/90240
	Revert:
	2019-04-23  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/90078
	* tree-ssa-loop-ivopts.c (comp_cost::operator +,-,+=,-+,/=,*=): Add
	checks for infinite_cost overflow.

2019-04-29  Jeff Law  <law@redhat.com>

	* passes.def: Move -Wrestrict pass after copy propagation.

2019-04-29  Maya Rashish  <coypu@sdf.org>

	* config.gcc (default_gnu_indirect_function): Default to yes
	for arm*-*-netbsd*, i[34567]86-*-netbsd*, powerpc*-*-netbsd*,
	sparc*-*-netbsd*, x86_64-*-netbsd*.

2019-04-29  Vladislav Ivanishin  <vlad@ispras.ru>

	* tree-ssa-uninit.c (is_pred_expr_subset_of): Correctly handle cases
	where cond2 is NE_EXPR.
	(is_value_included_in): Update comment.

2019-04-29  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90278
	* tree-ssa-forwprop.c (pass_forwprop::execute): Transfer/clean
	EH on comparison simplification.

2019-04-29  Jason Merrill  <jason@redhat.com>

	PR c++/82081 - tail call optimization breaks noexcept
	* tree-tailcall.c (find_tail_calls): Don't turn a call from a
	nothrow function to a might-throw function into a tail call.

2019-04-29  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-data-ref.h (data_dependence_relation::inner_loop): Delete.
	(DDR_INNER_LOOP): Likewise.
	* tree-data-ref.c (dump_data_dependence_relation): Update accordingly.
	(initialize_data_dependence_relation): Likewise.
	(insert_innermost_unit_dist_vector): Use 0 instead of DDR_INNER_LOOP.

2019-04-29  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/90257
	* cfgrtl.c (flow_active_insn_p): Return true for USE of a function
	return value.

	Revert the revert:
	2019-04-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/90178
	Revert:
	2018-11-21  Uros Bizjak  <ubizjak@gmail.com>

	Revert the revert:
	2013-10-26  Vladimir Makarov  <vmakarov@redhat.com>

	Revert:
	2013-10-25  Vladimir Makarov  <vmakarov@redhat.com>

	* lra-spills.c (lra_final_code_change): Remove useless move insns.

2019-04-29  Richard Biener  <rguenther@suse.de>

	* tree-ssa.c (insert_debug_temp_for_var_def): For {CLOBBER}
	rhs issue a reset.

2019-04-27  Iain Buclaw  <ibuclaw@gdcproject.org>

	* config/netbsd-d.c: Include memmodel.h.  Remove unused tree.h,
	varasm.h, and netbsd-protos.h.

2019-04-27  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89261
	* config/i386/i386-protos.h (ix86_data_alignment): Change
	the second argument type to unsigned int.
	* config/i386/i386.c (ix86_data_alignment): Change "align"
	argument type to unsigned int.

2019-04-27  Martin Liska  <mliska@suse.cz>

	PR middle-end/90258
	* opt-suggestions.c (option_proposer::build_option_suggestions):
	When get_valid_option_values returns empty values, add the
	misspelling candidate.

2019-04-26  Jim Wilson  <jimw@sifive.com>

	* config/riscv/riscv-protos.h (riscv_move_integer): Add machine_mode
	parameter.
	* config/riscv/riscv.c (riscv_move_integer): New parameter orig_mode.
	Pass orig_mode to riscv_build_integer.
	(riscv_split_integer): Pass mode to riscv_move_integer.
	(riscv_legitimize_const_move): Likewise.
	(riscv_legitimize_move): For MEM dest and CONST_INT src case, new local
	promoted_mode.  Replace force_reg call with code to load constant into
	promoted reg and then subreg it for the store.
	* config/riscv/riscv.md (low<mode>+1): Pass <GPR:MODE>mode to
	riscv_move_integer.

2018-04-26  Eugene Sharygin  <eush@ispras.ru>

	* gdbhooks.py: Fix UnicodeDecodeErrors when printing trees with
	corrupt codes.

2019-04-26  Richard Sandiford  <richard.sandiford@arm.com>

	* tree.h (TYPE_VECTOR_SUBPARTS, SET_TYPE_VECTOR_SUBPARTS): Add
	commentary about the encoding of precision.

2019-04-25  Andreas Tobler  <andreast@gcc.gnu.org>

	* config/i386/freebsd64.h: Add bits for 32-bit multilib support.
	* config/i386/t-freebsd64: New file.
	* config.gcc: Add the t-freebsd64 for multilib support.

2019-04-25  Uroš Bizjak  <ubizjak@gmail.com>

	* doc/extend.texi (vector_size): Add missing comma after @xref.

2019-04-25  Jakub Jelinek  <jakub@redhat.com>

	* BASE-VER: Set to 10.0.0.

2019-04-25  Richard Biener  <rguenther@suse.de>

	PR middle-end/89765
	* gimplify.c (gimplify_expr): Avoid turning a lvalue
	VIEW_CONVERT_EXPR into one operating on an rvalue.

2019-04-25  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89929
	* config/i386/i386.c (feature_priority): Moved to file scope.
	(processor_features): Likewise.
	(processor_model): Likewise.
	(_arch_names_table): Likewise.
	(arch_names_table): Likewise.
	(_feature_list): Removed.
	(feature_list): Likewise.
	(_isa_names_table): Moved to file scope.  Add priority.
	(isa_names_table): Likewise.
	(get_builtin_code_for_version): Replace feature_list with
	isa_names_table.  Update error message for P_ZERO priority.

2019-04-25  Richard Biener  <rguenther@suse.de>

	* tree-pass.h (make_pass_phi_only_cprop): Remove.
	* timevar.def (TV_TREE_PHI_CPROP): Likewise.

2019-04-24  Jeff Law  <law@redhat.com>

	PR tree-optimization/90037
	* Makefile.in (OBJS): Remove tree-ssa-phionlycprop.c
	* passes.def: Replace all instance of phi-only cprop with the
	lattice propagator.  Move propagation pass from after erroneous
	path isolation to before erroneous path isolation.
	* tree-ssa-phionlycprop.c: Remove.

2019-04-24  Richard Biener  <rguenther@suse.de>

	PR middle-end/90213
	* gimple-fold.c (fold_const_aggregate_ref_1): Do multiplication
	by size and BITS_PER_UNIT on poly-wide-ints.

2019-04-25  Richard Biener  <rguenther@suse.de>

	PR middle-end/90194
	* match.pd: Add pattern to simplify view-conversion of an
	empty constructor.

2019-04-24  Clement Chigot  <clement.chigot@atos.net>

	* config/rs6000/aix71.h (SUBTARGET_OVERRIDE_OPTIONS): Disable
	OPTION_MASK_VSX and OPTION_MASK_ALTIVEC from rs6000_isa_flags
	for Go on 32 bit AIX.
	* config/rs6000/aix72.h: Likewise.

2019-04-24  Jakub Jelinek  <jakub@redhat.com>

	PR target/90193
	* rtl.c (classify_insn): Return JUMP_INSN for asm goto.
	* emit-rtl.c (try_split): Copy over REG_LABEL_TARGET.

2019-04-24  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/89952
	* config/s390/s390.c (s390_restore_gprs_from_fprs): Restore GPRs
	from FPRs in reverse order.  Generate REG_CFA_DEF_CFA note also
	for restored hard frame pointer.
	(s390_sched_dependencies_evaluation): Implement new target hook.
	(TARGET_SCHED_DEPENDENCIES_EVALUATION_HOOK): New macro definition.

2019-04-24  Claudiu Zissulescu  <claziss@sysnopsys.com>

	* config/arc/arc-options.def: Fix typos and spelling mistakes.
	* config/arc/arc.c (arc_init): Cleanup warning message.
	(arc_override_options): Likewise.

2019-04-24  Jakub Jelinek  <jakub@redhat.com>

	PR target/90187
	* config/i386/i386.c (ix86_expand_sse_fp_minmax): Force if_true into
	a register if both if_true and if_false are MEMs.

	PR tree-optimization/90208
	* tree-cfg.c (remove_bb): Move forced labels from removed bbs
	after labels of new_bb, not before them.

	PR tree-optimization/90211
	* tree-parloops.c (try_create_reduction_list): Ignore phi arguments
	which are not SSA_NAMEs.

2018-04-23  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64-linux.h (TARGET_ASM_FILE_END): Define for
	AArch64.
	(aarch64_file_end_indicate_exec_stack): Add gnu note section.

2019-04-23  Roman Zhuykov  <zhroma@ispras.ru>

	PR rtl-optimization/87979
	* modulo-sched.c (sms_schedule): Start ii value "mii" should
	not equal zero.

2019-04-23  Roman Zhuykov  <zhroma@ispras.ru>

	PR rtl-optimization/84032
	* modulo-sched.c (ps_insn_find_column): Change condition so that
	branch will always be the last insn in a row inside partial
	schedule.

2019-04-23  Richard Biener  <rguenther@suse.de>

	PR debug/90131
	* tree-cfgcleanup.c (move_debug_stmts_from_forwarder): Add
	dest_single_pred_p argument.
	(remove_forwarder_block): Adjust.
	(remove_forwarder_block_with_phi): Likewise.

2019-04-23  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>
	    Bernd Edlinger  <bernd.edlinger@hotmail.de>
	    Jakub Jelinek  <jakub@redhat.com>

	PR target/89093
	* config/arm/arm.c (aapcs_vfp_is_call_or_return_candidate): Diagnose
	if used with general-regs-only.
	(arm_conditional_register_usage): Don't add non-general regs if
	general-regs-only.
	(arm_valid_target_attribute_rec): Handle general-regs-only.
	* config/arm/arm.h (TARGET_HARD_FLOAT): Return false if
	general-regs-only.
	(TARGET_HARD_FLOAT_SUB): Define.
	(TARGET_SOFT_FLOAT): Define as negation of TARGET_HARD_FLOAT_SUB.
	(TARGET_REALLY_IWMMXT): Add && !TARGET_GENERAL_REGS_ONLY.
	(TARGET_REALLY_IWMMXT2): Likewise.
	* config/arm/arm.opt: Add -mgeneral-regs-only.
	* doc/extend.texi: Document ARM general-regs-only target.
	* doc/invoke.texi: Document ARM -mgeneral-regs-only.

2019-04-23  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/90078
	* tree-ssa-loop-ivopts.c (comp_cost::operator +,-,+=,-+,/=,*=): Add
	checks for infinite_cost overflow.

2019-04-23  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/90021
	* tree-chrec.c (evolution_function_is_univariate_p): New parameter
	and check univariate against it.
	* tree-chrec.h (evolution_function_is_univariate_p): New parameter.
	* tree-data-ref.c (add_other_self_distances): Pass new argument.

2019-04-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/90178
	Revert:
	2018-11-21  Uros Bizjak  <ubizjak@gmail.com>

	Revert the revert:
	2013-10-26  Vladimir Makarov  <vmakarov@redhat.com>

	Revert:
	2013-10-25  Vladimir Makarov  <vmakarov@redhat.com>

	* lra-spills.c (lra_final_code_change): Remove useless move insns.

2019-04-21  Iain Sandoe  <iain@sandoe.co.uk>

	* config/rs6000/rs6000.md (group_end_nop): Emit insn register
	names using operand format, rather than hard-wired.
	(speculation_barrier): Likewise.

2019-04-19  Segher Boessenkool  <segher@kernel.crashing.org>

	PR tree-optimization/88055
	* tree-call-cdce.c (comparison_code_if_no_nans): New function.
	(gen_one_condition): Use it if !HONOR_NANS.

2019-04-19  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/90139
	* tree-outof-ssa.c (get_temp_reg): If reg_mode is BLKmode, return
	assign_temp instead of gen_reg_rtx.

2019-04-19  Christophe Lyon  <christophe.lyon@linaro.org>

	PR translation/90118
	* config/aarch64/aarch64.c (aarch64_override_options_internal):
	Add missing space before %<.

2019-04-18  Peter Bergner  <bergner@linux.ibm.com>

	PR rtl-optimization/87871
	* ira-lives.c (make_object_dead): Don't add conflicts to
	TOTAL_CONFLICT_HARD_REGS for register ignore_reg_for_conflicts.

2019-04-18  Martin Sebor  <msebor@redhat.com>

	PR middle-end/89797
	* tree.h (TYPE_VECTOR_SUBPARTS): Use HOST_WIDE_INT_1U.
	* config/aarch64/aarch64.c (aarch64_simd_vector_alignment): Avoid
	assuming type size fits in SHWI.

2019-04-18  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/85051
	* ipa-inline.c (flatten_function): New parameter UPDATE.
	(ipa_inline, early_inliner): Use it.

2019-04-18  Richard Sandiford  <richard.sandiford@arm.com>

	* fold-const.c (int_const_binop): Return early on failure.

2019-04-18  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/85164
	* combine.c (force_int_to_mode): Cast the argument rather than
	the result of known_alignment.
	* rtlanal.c (rtx_addr_can_trap_p_1): Use known_subrange_p.

2019-04-18  Richard Biener  <rguenther@suse.de>

	PR debug/90131
	* tree-cfgcleanup.c (move_debug_stmts_from_forwarder): Split
	out from ...
	(remove_forwarder_block): ... here.
	(remove_forwarder_block_with_phi): Also move debug stmts here.

2019-04-18  Jakub Jelinek  <jakub@redhat.com>

	PR translation/79183
	* gimple-ssa-sprintf.c (format_directive): Use inform_n instead of
	inform where appropriate.

2019-04-18  Richard Biener  <rguenther@suse.de>

	* tree.c (get_qualified_type): Put found type variants at the
	head of the variant list.

2018-04-17  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_register_move_cost): Fix typo.

2019-04-17  Hongtao Liu  <hongtao.liu@intel.com>

	PR target/90125
	* config/i386/avx512fintrin.h (_mm_maskz_fmadd_round_sd,
	_mm_maskz_fmadd_round_ss, _mm_maskz_fmsub_round_sd,
	_mm_maskz_fmsub_round_ss, _mm_maskz_fnmadd_round_sd,
	_mm_maskz_fnmadd_round_ss, _mm_maskz_fnmsub_round_sd,
	_mm_maskz_fnmsub_round_ss): Use _maskz builtin instead of _mask3.

2019-04-17  Peter Bergner  <bergner@linux.ibm.com>

	* ira-conflicts.c (print_allocno_conflicts): Always print something,
	even for allocno's with no conflicts.
	(print_conflicts): Print an extra newline.

2019-04-17  Segher Boessenkool  <segher@kernel.crashing.org>

	* auto-inc-dec.c (attempt_change): Set the alignment of the
	temporary memory to that of the original.

2019-04-17  Joao Moreira  <jmoreira@suse.de>

	* targhooks.c (default_print_patchable_function_entry): Emit
	__patchable_function_entries section with writable flags to allow
	relocation resolution.

2019-04-17  Jonny Grant  <jg@jguk.org>

	* collect2.c (main): Change gcc.gnu.org URL to HTTPS.

2019-04-17  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/90095
	* internal-fn.c (expand_mul_overflow): Don't set SUBREG_PROMOTED_VAR_P
	on lowpart SUBREGs.

2019-04-17  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_init): Format diagnostic string.
	(arc_override_options): Likewise.
	(check_if_valid_regno_const): Likewise.
	(arc_reorg): Likewise.

2019-04-17  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/17108
	* config/rs6000/rs6000.c (rs6000_split_multireg_move): Adjust pattern
	name.
	(rs6000_emit_allocate_stack_1): Simplify condition.  Adjust pattern
	name.
	* config/rs6000/rs6000.md (bits): Add entries for SF and DF.
	(*movdi_update1): Use Pmode.
	(movdi_<mode>_update): Fix argument to avoiding_indexed_address_p.
	(movdi_<mode>_update_stack): Rename to ...
	(movdi_update_stack): ... this.  Fix comment.  Change condition. Don't
	use Pmode.
	(*movsi_update1): Use Pmode.
	(*movsi_update2): Use Pmode.
	(movsi_update): Rename to ...
	(movsi_<mode>_update): ... this.  Use Pmode.
	(movsi_update_stack): Fix condition.
	(*movhi_update1): Use Pmode.  Fix argument to
	avoiding_indexed_address_p.
	(*movhi_update2): Ditto.
	(*movhi_update3): Ditto.
	(*movhi_update4): Ditto.
	(*movqi_update1): Ditto.
	(*movqi_update2): Ditto.
	(*movqi_update3): Ditto.
	(*movsf_update1, *movdf_update1): Merge, rename to...
	(*mov<mode>_update1): This.  Use Pmode.  Fix argument to
	avoiding_indexed_address_p.  Add "size" attribute.
	(*movsf_update2, *movdf_update2): Merge, rename to...
	(*mov<mode>_update2): This.  Ditto.
	(*movsf_update3): Use Pmode.  Fix argument to
	avoiding_indexed_address_p.
	(*movsf_update4): Ditto.
	(allocate_stack): Simplify condition.  Adjust pattern names.

2019-04-17  Jakub Jelinek  <jakub@redhat.com>

	PR target/89093
	* config/arm/arm.c (arm_valid_target_attribute_rec): Don't skip
	whitespace at the start of target attribute string.

2019-04-16  Pat Haugen  <pthaugen@us.ibm.com>

	PR target/84369
	* config/rs6000/power9.md: Add store forwarding bypass.

2019-04-16  Alexandre Oliva  <aoliva@redhat.com>

	PR debug/89528
	* valtrack.c (dead_debug_insert_temp): Reset debug references
	to the return value of a call being removed.

2019-04-16  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (arc_register_move_cost): Remove.
	* config/arc/arc.c (arc_register_move_cost): Re-purpose it to
	implement target hook.
	(arc_memory_move_cost): New function.
	(TARGET_REGISTER_MOVE_COST): Define.
	(TARGET_MEMORY_MOVE_COST): Likewise.
	* config/arc/arc.h (REGISTER_MOVE_COST): Remove.
	(MEMORY_MOVE_COST): Likewise.

2019-04-16  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (sibcall_insn): Use Rcd constraint.
	(sibcall_value_insn): Likewise.
	* config/arc/constraints.md (Rs5): Remove.

2019-04-16  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_hard_regno_modes): Add two missing modes
	for last two fake registers.
	(arc_conditional_register_usage): Make sure fake frame and arg
	pointer regs are in general regs class.
	(FRAME_POINTER_MASK): Remove.
	(RETURN_ADDR_MASK): Remove.
	(arc_must_save_register): Use hard frame regnum.
	(frame_restore_reg): Use hard_frame_pointer_rtx.
	(arc_save_callee_saves): Likewise.
	(arc_restore_callee_saves): Likewise.
	(arc_save_callee_enter): Likewise.
	(arc_restore_callee_leave): Likewise.
	(arc_save_callee_milli): Likewise.
	(arc_eh_return_address_location): Likewise.
	(arc_check_multi): Use hard frame regnum.
	(arc_can_eliminate): Likewise.
	* config/arc/arc.h (FIXED_REGISTERS): Make FP register available
	for register allocator.
	(REG_CLASS_CONTENTS): Update GENERAL_REGS.
	(REGNO_OK_FOR_BASE_P): Consider FRAME_POINTER_REGNUM.
	(FRAME_POINTER_REGNUM): Change it to a fake register.
	(HARD_FRAME_POINTER_REGNUM): Defined.
	(ARG_POINTER_REGNUM): Change it to a new fake register.
	(ELIMINABLE_REGS): Update.
	(REGISTER_NAMES): Update names.
	* config/arc/arc.md (LP_START): Remove.
	(LP_END): Likewise.
	(shift_si3_loop): Update pattern.

2019-04-16  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (arc_expand_prologue): Emit blockage regardless
	to avoid delay slot scheduling.
	(arc_must_save_register): Don't save SP.
	* config/arc/arc.md (stack_tie): Remove.
	(UNSPEC_ARC_STKTIE): Likewise.

2019-04-16  Kito Cheng  <kito.cheng@gmail.com>
	    Shiva Chen  <shiva0217@gmail.com>

	* config/nds32/nds32-md-auxiliary.c (nds32_split_ashiftdi3): Fix wrong
	code gen with large shift amount.

2019-04-16  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-pipelines-auxiliary.c (wext_odd_dep_p): Handle
	subreg.

2019-04-16  Jakub Jelinek  <jakub@redhat.com>

	PR target/90096
	* config/i386/i386.c (ix86_target_string): Add ADD_ABI_P argument, only
	print -m64/-mx32/-m32 if it is true.
	(ix86_debug_options, ix86_function_specific_print): Pass true as
	ADD_ABI_P to ix86_target_string.
	(ix86_expand_builtin): Adjust ix86_target_string caller, pass true as
	ADD_ABI_P only if OPTION_MASK_ISA_64BIT is set in bisa and in that case
	or into it OPTION_MASK_ISA_ABI_64 or OPTION_MASK_ISA_ABI_X32.

	PR rtl-optimization/90082
	* dce.c (can_delete_call): New function.
	(deletable_insn_p, mark_insn): Use it.

	PR tree-optimization/90090
	* tree-ssa-math-opts.c (is_division_by): Ignore divisions that can
	throw internally.
	(is_division_by_square): Likewise.  Formatting fix.

2019-04-16  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/56049
	* tree-ssa-loop-im.c (mem_ref_hasher::equal): Elide alias-set
	equality check if alias-set zero will prevail.

2019-04-15  Jeff Law  <law@redhat.com>

	* config/microblaze/microblaze.c (microblaze_expand_block_move): Treat
	size and alignment as unsigned.

2019-04-15  Richard Biener  <rguenther@suse.de>

	PR debug/90074
	* tree-loop-distribution.c (destroy_loop): Preserve correct
	debug info.

2019-04-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90071
	* tree-ssa-reassoc.c (init_range_entry): Do not pick up
	abnormal operands from def stmts.

2019-04-15  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/89794
	* combine.c (count_auto_inc): New function.
	(try_combine): Count how many auto_inc expressions there were in the
	original instructions.  Ensure we have the same number in the new
	instructions.  Remove the code that tried to ensure auto_inc side
	effects on i1 and i0 are not lost.

2019-04-15  Richard Biener  <rguenther@suse.de>

	PR ipa/88936
	* tree.h (auto_var_p): Declare.
	* tree.c (auto_var_p): New function, split out from ...
	(auto_var_in_fn_p): ... here.
	* tree-ssa-structalias.c (struct variable_info): Add shadow_var_uid
	member.
	(new_var_info): Initialize it.
	(set_uids_in_ptset): Also set the shadow variable uid if required.
	(ipa_pta_execute): Postprocess points-to solutions assigning
	shadow variable uids for locals that may reach their containing
	function recursively.
	* tree-ssa-ccp.c (fold_builtin_alloca_with_align): Do not
	assert but instead check whether the points-to solution is
	a singleton.

2019-04-15  Martin Jambor  <mjambor@suse.cz>

	PR ipa/pr89693
	* cgraph.c (clone_of_p): Loop over clone chain for each step in
	the thunk chain.

2019-04-15  Monk Chiang  <sh.chiang04@gmail.com>

	* config.gcc (nds32*-*-linux*): Set gcc_cv_initfini_array to yes.

2019-04-15  Monk Chiang  <sh.chiang04@gmail.com>
	    Kito Cheng  <kito.cheng@gmail.com>
	    Shiva Chen  <shiva0217@gmail.com>

	* config/nds32/nds32-md-auxiliary.c
	(nds32_legitimize_pic_address): Use new PIC pattern.
	(nds32_legitimize_tls_address): Use new TLS pattern.
	(nds32_output_symrel): New.
	* config/nds32/nds32-protos.h (nds32_output_symrel): Declare.
	(nds32_alloc_relax_group_id): Ditto.
	* config/nds32/nds32-relax-opt.c (nds32_alloc_relax_group_id): New.
	(nds32_group_insns): Use nds32_alloc_relax_group_id instead of use
	relax_group_id.
	(nds32_group_tls_insn): Ditto.
	(nds32_group_float_insns): Ditto.
	* config/nds32/nds32.md (tls_le): New.
	(sym_got): Ditto.

2019-04-15  Chung-Ju Wu  <jasonwucj@gmail.com>

	* configure: Add nds32 target for dwarf2 debug_line checking.
	* configure.ac: Regenerated.

2019-04-14  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/89358
	* ipa-devirt.c (skip_in_fields_list_p): New.
	(odr_types_equivalent_p): Use it.

2019-04-13  Jakub Jelinek  <jakub@redhat.com>

	PR target/89093
	* config/arm/arm.c (arm_valid_target_attribute_rec): Use strcmp
	instead of strncmp when checking for thumb and arm.  Formatting fixes.

2019-04-12  Iain Buclaw  <ibuclaw@gdcproject.org>

	* doc/install.texi: Document --with-target-system-zlib.

2019-04-12  Martin Sebor  <msebor@redhat.com>

	PR c/88383
	PR c/89288
	PR c/89798
	PR c/89797
	* targhooks.c (default_vector_alignment): Avoid assuming
	argument fits in SHWI.
	* tree.h (TYPE_VECTOR_SUBPARTS): Avoid sign overflow in
	a shift expression.
	* doc/extend.texi (__builtin_has_attribute): Add a clarifying note.

2019-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89965
	* dce.c: Include rtl-iter.h.
	(struct check_argument_load_data): New type.
	(check_argument_load): New function.
	(find_call_stack_args): Check for loads from stack slots still tracked
	in sp_bytes and punt if any is found.

	* config/mips/loongson-mmiintrin.h: Fix up #error message.

2019-04-12  Jan Hubicka  <hubicka@ucw.cz>

	* params.def (PARAM_MAX_LTO_STREAMING_PARALLELISM): New parameter.
	* doc/invoke.texi (max-lto-streaming-paralellism): New --param.

2019-04-12  Martin Liska  <mliska@suse.cz>

	PR middle-end/89970
	* multiple_target.c (create_dispatcher_calls): Wrap ifunc
	in error message.
	(separate_attrs): Handle multiple 'default's.
	(expand_target_clones): Rework error handling code.

2019-04-12  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	PR target/87532
	* config/rs6000/rs6000.c (rs6000_split_vec_extract_var): Use inner
	mode of vector rather than mode of destination for move instruction.
	* config/rs6000/vsx.md (*vsx_extract_<mode>_<VS_scalar>mode_var):
	Use QI inner mode with V16QI vector mode.

2019-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/52726
	* config/tilepro/tilepro.c (tilepro_print_operand): Use just
	"invalid %%t operand" in output_operand_lossage message.

2019-04-12  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/predicates.md (permute_pattern_operand): New
	predicate.
	* config/s390/vector.md ("*vec_splats_bswap_vec<mode>"): Add USE
	operand for the permute pattern.
	("*vec_perm<mode>"): New insn definition.
	("bswap<mode>"): Generate the permute pattern operand in the
	expander and perform the operand reloads for pre arch13 level
	already.
	("*bswap<mode>_emu"): Rename to ...
	("*bswap<mode>"): ... this. And make the splitter vxe2 only.
	* config/s390/vx-builtins.md ("*vec_insert_and_zero_bswap<mode>"):
	Add the USE operand for the permute pattern.
	("*vec_set_bswap_vec<mode>"): Likewise.

2019-04-12  Jakub Jelinek  <jakub@redhat.com>

	PR c/89946
	* varasm.c (assemble_start_function): Don't use tree_fits_uhwi_p
	and gcc_unreachable if it fails, just call tree_to_uhwi which
	verifies that too.  Test TREE_CHAIN instead of list_length > 1.
	Start warning message with a lower-case letter.  Formatting fixes.

	PR rtl-optimization/90026
	* cfgcleanup.c (try_optimize_cfg): When removing empty bb with no
	successors, look for BARRIERs inside of the whole BB_FOOTER chain
	rather than just at the start of it.  If e->src BB_FOOTER is not NULL
	in cfglayout mode, use emit_barrier_after_bb.

2018-04-11  Steve Ellcey  <sellcey@marvell.com>

	PR rtl-optimization/87763
	* config/aarch64/aarch64.md (*aarch64_bfi<GPI:mode>4_noshift_alt):
	New Instruction.

2019-04-11  Tom de Vries  <tdevries@suse.de>

	* doc/extend.texi (@node Statement Exprs): Note variable shadowing at
	max macro using statement expression.

2019-04-11  David Edelsohn  <dje.gcc@gmail.com>

	* xcoffout.h (xcoff_private_rodata_section_name): Declare.
	* xcoffout.c (xcoff_private_rodata_section_name): Define.
	* config/rs6000/rs6000.c (rs6000_xcoff_asm_init_sections): Create
	read_only_private_data_section using xcoff_private_rodata_section_name.
	(rs6000_xcoff_file_start): Generate xcoff_private_rodata_section_name.

2019-04-11  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/90016
	* config/aarch64/aarch64.opt (msve-vector-bits): Add missing final '.'.

2019-04-11  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89965
	* dce.c (sp_based_mem_offset): New function.
	(find_call_stack_args): Use sp_based_mem_offset.

2019-04-11  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (Optimize Options): Clarify -flive-patching docs.

2019-04-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90020
	* tree-ssa-sccvn.c (vn_reference_may_trap): New function.
	* tree-ssa-sccvn.h (vn_reference_may_trap): Declare.
	* tree-ssa-pre.c (compute_avail): Use it to not put
	possibly trapping references after a call that might not
	return into EXP_GEN.
	* gcse.c (compute_hash_table_work): Do not elide
	marking a block containing a call if the call might not
	return.

2019-04-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90018
	* tree-vect-data-refs.c (vect_preserves_scalar_order_p):
	Test both SLP and interleaving variants.

2019-04-11  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/8561.md: New file.
	* config/s390/driver-native.c (s390_host_detect_local_cpu):
	Add arch13 cpu model.
	* config/s390/s390-opts.h (enum processor_type): Likewise.
	* config/s390/s390.c (s390_get_sched_attrmask): Add arch13.
	(s390_get_unit_mask): Likewise.
	(s390_is_fpd): Likewise.
	(s390_is_fxd): Likewise.
	* config/s390/s390.h (s390_tune_attr): Likewise.
	* config/s390/s390.md: Include arch13 pipeline description.
	* config/s390/s390.opt: Add arch13.

2018-04-10  Steve Ellcey  <sellcey@marvell.com>

	PR rtl-optimization/87763
	* config/aarch64/aarch64-protos.h (aarch64_masks_and_shift_for_bfi_p):
	New prototype.
	* config/aarch64/aarch64.c (aarch64_masks_and_shift_for_bfi_p):
	New function.
	* config/aarch64/aarch64.md (*aarch64_bfi<GPI:mode>5_shift):
	New instruction.
	(*aarch64_bfi<GPI:mode>5_shift_alt): Ditto.
	(*aarch64_bfi<GPI:mode>4_noand): Ditto.
	(*aarch64_bfi<GPI:mode>4_noand_alt): Ditto.
	(*aarch64_bfi<GPI:mode>4_noshift): Ditto.

2019-04-10  Jonathan Wakely  <jwakely@redhat.com>

	* doc/invoke.texi (Optimize Options): Change "Nevertheless" to
	"Although" in -fipa-icf documentation.

	* doc/invoke.texi (Debugging Options): Explicitly state the semantics
	of using multiple -g options.

2019-04-10  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/89959
	* doc/gcov.texi: Make documentation of -x option
	more precise.

2019-04-10  Richard Biener  <rguenther@suse.de>

	* tree-vectorizer.h (_stmt_vec_info): Remove same_dr_stmt
	member.
	(DR_GROUP_SAME_DR_STMT): Remove.
	* tree-vect-stmts.c (vectorizable_load): Remove unreachable code.
	* tree-vect-data-refs.c (vect_analyze_group_access_1): Likewise,
	replace with assert.
	(vect_analyze_data_ref_accesses): Fix INTEGER_CST comparison.
	(vect_record_grouped_load_vectors): Remove unreachable code.

2019-04-10  Richard Earnshaw  <rearnsha@arm.com>

	PR target/90016
	* config/aarch64/aarch64.opt (msve-vector-bits): Remove redundant and
	obsolete reference to N.

2019-04-10  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/90025
	* expr.c (store_expr): Set properly size on the MEM passed to
	clear_storage.

	PR c++/90010
	* gimple-ssa-sprintf.c (target_to_host): Fix handling of targstr
	with strlen in between hostsz-3 and hostsz-1 inclusive when no
	translation is needed, and when translation is needed, only append
	... if the string length is hostsz or more bytes long.  Avoid using
	strncpy or strcat.

2019-04-09  Matthew Malcomson  <matthew.malcomson@arm.com>

	PR target/90024
	* config/arm/arm.c (neon_valid_immediate): Disallow VOIDmode parameter.
	* config/arm/constraints.md (Dm, DN, Dn): Split previous Dn constraint
	into three.
	* config/arm/neon.md (*neon_mov<mode>): Account for TImode and DImode
	differences directly.
	(*smax<mode>3_neon, vashl<mode>3, vashr<mode>3_imm): Use Dm constraint.

2019-04-09  Jakub Jelinek  <jakub@redhat.com>

	PR translation/90011
	* ipa-devirt.c (compare_virtual_tables): Remove two trailing spaces
	from diagnostics.
	* config/arm/freebsd.h (LINK_SPEC): Remove trailing space from -p
	diagnostics.
	* config/riscv/freebsd.h (LINK_SPEC): Likewise.
	* config/aarch64/aarch64-freebsd.h (FBSD_TARGET_LINK_SPEC): Likewise.
	* config/darwin.h (DRIVER_SELF_SPECS, ASM_FINAL_SPEC): Remove
	trailing space from -gsplit-dwarf diagnostics.

	PR tree-optimization/89998
	* gimple-ssa-sprintf.c (try_substitute_return_value): Use lhs type
	instead of integer_type_node if possible, don't add ranges if return
	type is not compatible with int.
	* gimple-fold.c (gimple_fold_builtin_sprintf,
	gimple_fold_builtin_snprintf): Use lhs type instead of hardcoded
	integer_type_node.

2019-04-09  Martin Liska  <mliska@suse.cz>

	* Makefile.in: Use GENERATOR_CFLAGS for all generators.
	* doc/install.texi: Document the new config.

2019-04-09  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-data-refs.c (vect_get_smallest_scalar_type): Always
	use gimple_expr_type for load and store calls.  Skip over the
	condition argument in a conditional internal function.
	Protect use of TREE_INT_CST_LOW.

2019-04-09  Jakub Jelinek  <jakub@redhat.com>

	PR target/90015
	* config/riscv/riscv.c (riscv_get_interrupt_type): Fix comment typo.
	(riscv_merge_decl_attributes): Fix typo in diagnostics.  Remove
	trailing period from it too.

2019-04-08  wu yuan  <wuyuan5@huawei.com>

	* config/aarch64/aarch64-cores.def (tsv1100): Change scheduling model.
	* config/aarch64/aarch64.md: Add "tsv110.md".
	* config/aarch64/tsv110.md: New file.

2019-04-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/90006
	* tree-vect-data-refs.c (vect_get_smallest_scalar_type): Handle
	calls like lrint.

2019-04-08  Andrea Corallo  <andrea.corallo@arm.com>

	PR target/83033
	* config/aarch64/cortex-a57-fma-steering.c (fma_forest): Prohibit copy
	construction.
	(fma_root_node): Likewise.
	(func_fma_steering): Likewise.

2019-04-08  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89865
	* config/i386/i386.md: Add peepholes for z = x; x ^= y; x != z.

	PR rtl-optimization/89865
	* config/i386/i386.md
	(SWI12 peephole for mem {+,-,&,|,^}= x; mem != 0): Fix up operand
	numbers not to clash with the additional operands[4].
	(peepholes for mem {+,-,&,|,^}= x; mem != 0): New peephole2s
	with extra register copy in the middle.

2019-04-08  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/89961
	* doc/gcov.texi: Document data_file.
	* gcov.c (generate_results): Add data_info into JSON output.

2019-04-01  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/89725
	* tree-chrec.c (chrec_contains_symbols): New parameter.  Handle outer
	loop's chrec as invariant symbol.
	* tree-chrec.h (chrec_contains_symbols): New parameter.
	* tree-data-ref.c (analyze_miv_subscript): Pass new argument.
	(build_classic_dist_vector_1, add_other_self_distances): Bypass access
	function of loops not in DDR's loop_nest.
	* tree-data-ref.h (index_in_loop_nest): Add unreachable check.

2019-04-08  Chenghua Xu  <paul.hua.gm@gmail.com>

	PR target/89623
	* config/mips/mips.opt (LOONGSON_EXT2): Use Var instead of
	Mask.

2019-04-07  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89945
	* config/i386/i386.md (anddi_1 to andsi_1_zext splitter):
	Avoid calling gen_lowpart with SYMBOL_REF and LABEL_REF operand.

2019-04-05  Joern Rennecke  <joern.rennecke@embecosm.com>

	* sched-deps.c (sched_macro_fuse_insns): Check return value of
	targetm.fixed_condition_code_regs.

2019-04-05  Richard Biener  <rguenther@suse.de>

	PR debug/89892
	PR debug/89905
	* tree-cfgcleanup.c (remove_forwarder_block): Always move
	debug bind stmts but reset them if they are not valid at the
	destination.

2019-04-05  Martin Liska  <mliska@suse.cz>

	PR translation/89936
	* collect-utils.c (collect_execute): Use %< and %>, or %qs in
	order to wrap keywords or arguments.
	* collect2.c (main): Likewise.
	(scan_prog_file): Likewise.
	(scan_libraries): Likewise.
	* common/config/riscv/riscv-common.c
	(riscv_subset_list::parsing_subset_version): Likewise.
	(riscv_subset_list::parse_std_ext): Likewise.
	* config/aarch64/aarch64.c (aarch64_override_options_internal):
	Likewise.
	* config/arm/arm.c (arm_option_override): Likewise.
	* config/cris/cris.c (cris_print_operand): Likewise.
	* config/darwin-c.c (darwin_pragma_options): Likewise.
	(darwin_pragma_unused): Likewise.
	(darwin_pragma_ms_struct): Likewise.
	* config/ft32/ft32.c (ft32_print_operand): Likewise.
	* config/i386/i386.c (print_reg): Likewise.
	(ix86_print_operand): Likewise.
	* config/i386/xm-djgpp.h: Likewise.
	* config/iq2000/iq2000.c (iq2000_print_operand): Likewise.
	* config/m32c/m32c.c (m32c_option_override): Likewise.
	* config/msp430/msp430.c (msp430_option_override): Likewise.
	* config/nds32/nds32.c (nds32_option_override): Likewise.
	* config/nvptx/mkoffload.c (main): Likewise.
	* config/rx/rx.c (rx_print_operand): Likewise.
	(valid_psw_flag): Likewise.
	* config/vms/vms-c.c (vms_pragma_member_alignment): Likewise.
	(vms_pragma_nomember_alignment): Likewise.
	(vms_pragma_extern_model): Likewise.
	* lto-wrapper.c (compile_offload_image): Likewise.
	* omp-offload.c (oacc_parse_default_dims): Likewise.
	* symtab.c (symtab_node::verify_base): Likewise.
	* tlink.c (recompile_files): Likewise.
	(start_tweaking): Likewise.
	* tree-profile.c (parse_profile_filter): Likewise.

2019-04-05  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/89956
	* tree-ssa-math-opts.c (convert_mult_to_fma): Protect against
	multiple negates of the same value.

2019-04-04  Martin Sebor  <msebor@redhat.com>

	PR middle-end/89957
	PR middle-end/89911
	* builtins.c (expand_builtin_strnlen): Make sure wi::ltu_p operands
	have the same precision since the function crashes otherwise.
	* calls.c (maybe_warn_nonstring_arg): Avoid assuming strnlen() call
	has non-zero arguments.

2019-04-04  Martin Sebor  <msebor@redhat.com>

	PR middle-end/89934
	* gimple-ssa-warn-restrict.c (builtin_access::builtin_access): Bail
	out if the number of arguments is less than expected.

2019-04-04  Jeff Law  <law@redhat.com>

	PR rtl-optimization/89399
	* ree.c (combine_set_extension): Use single_set rather than
	digging into PATTERN for items on the candidate list.
	(combine_reaching_defs): Likewise.

2019-04-04  Richard Sandiford  <richard.sandiford@arm.com>

	PR rtl-optimization/46590
	* loop-invariant.c (find_defs): Move df_remove_problem and
	df_process_deferred_rescans to move_invariants.
	Move df_live_add_problem and df_live_set_all_dirty calls
	to move_invariants.
	(move_invariants): Likewise.
	(move_loop_invariants): Likewise, making the df_live calls
	conditional on -O.  Remove the problem again if we added it
	locally.

2019-04-03  qing zhao  <qing.zhao@oracle.com>

	PR tree-optimization/89730
	* ipa-inline.c (can_inline_edge_p): Delete the checking for
	-flive-patching=inline-only-static.
	(can_inline_edge_by_limits_p): Add the checking for
	-flive-patching=inline-only-static and grant always_inline
	even when -flive-patching=inline-only-static is specified.

2019-04-03  Jeff Law  <law@redhat.com>

	PR rtl-optimization/81025
	* reorg.c (skip_consecutive_labels): Do not skip past a BARRIER.

2019-04-03  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/84101
	* tree-vect-stmts.c: Include explow.h for hard_function_value,
	regs.h for hard_regno_nregs.
	(cfun_returns): New helper.
	(vect_model_store_cost): When vectorizing a store to a decl
	we return and the function ABI returns in a multi-reg location
	account for the possible spilling that will happen.

2019-04-03  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_legitimate_address_p): Reject long
	displacement addresses for vector mode operands.

2019-04-03  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (GMASK_LEN): Define.
	(arc_restore_callee_saves): Restore first blink when
	!optimize_size.

2019-04-03  Sudakshina Das  <sudi.das@arm.com>

	* doc/extend.texi: Add deprecated comment on sign-return-address
	function attribute and add mbranch-protection.
	* doc/invoke.texi: Add bti to the options for mbranch-protection.

2019-04-03  Richard Biener  <rguenther@suse.de>

	PR lto/89896
	* lto-wrapper.c (run_gcc): Avoid implicit rules making
	the all target phony.

2019-04-02  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89902
	PR target/89903
	* config/i386/i386.c (dimode_scalar_to_vector_candidate_p):
	Return false for variable DImode shifts.
	(dimode_scalar_chain::compute_convert_gain): Do not handle
	register count operand in variable DImode shifts.
	(dimode_scalar_chain::make_vector_copies): Remove support to copy
	count argument of a variable shift instruction to a vector register.
	(dimode_scalar_chain::convert_reg): Remove support to convert
	count argument of a variable shift instruction.

2019-04-02  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/84206
	* sel-sched-ir.h (get_all_loop_exits): Avoid the outer loop when
	iterating over loop headers.

2019-04-02  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/85876
	* sel-sched.c (code_motion_path_driver): Avoid unwinding first_insn
	beyond the original fence.

2019-04-02  Ulrich Weigand  <uweigand@de.ibm.com>

	* config.gcc: Mark spu* targets as deprecated/obsolete.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: New builtin function type
	definitions. Remove unused types.
	* config/s390/s390-builtins.def (s390_vcdgb, s390_vcdlgb)
	(s390_vcgdb, s390_vclgdb): Remove low-level builtin definitions.
	(s390_vec_float, s390_vec_signed, s390_vec_unsigned): New
	overloaded builtins.
	(s390_vcefb, s390_vcdgb, s390_vcelfb, s390_vcdlgb, s390_vcfeb)
	(s390_vcgdb, s390_vclfeb, s390_vclgdb): New low-level builtins.
	* config/s390/vecintrin.h (vec_float): New builtin macro definition.
	(vec_double, vec_signed, vec_unsigned): Define to use the new
	overloaded builtins.
	* config/s390/vx-builtins.md ("vec_double_s64", "vec_double_u64"):
	Remove expanders.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: New builtin function type
	definitions.
	* config/s390/s390-builtins.def (s390_vec_search_string_cc)
	(s390_vec_search_string_until_zero_cc): New overloaded builtins.
	(s390_vstrsb, s390_vstrsh, s390_vstrsf, s390_vstrszb)
	(s390_vstrszh, s390_vstrszf): New low-level builtins.
	* config/s390/s390.md (UNSPEC_VEC_VSTRS, UNSPEC_VEC_VSTRSCC): New
	constant definitions.
	* config/s390/vecintrin.h (vec_search_string_cc)
	(vec_search_string_until_zero_cc): New builtin name definitions.
	* config/s390/vx-builtins.md ("vstrs<mode>", "vstrsz<mode>"): New
	expanders.
	("vec_vstrs<mode>"): New insn definition.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: Add new builtin function
	types.
	* config/s390/s390-builtins.def (s390_vec_sldb, s390_vec_srdb):
	New overloaded builtins.
	(s390_vec_sldb, s390_vec_srdb): New low-level builtins.  and
	s390_vsrd.
	* config/s390/s390.md (UNSPEC_VEC_SLDB): Rename to ...
	(UNSPEC_VEC_SLDBYTE): ... this.
	(UNSPEC_VEC_SLDBIT, UNSPEC_VEC_SRDBIT): New constant definitions.
	* config/s390/vecintrin.h (vec_sldb, vec_srdb): New builtin name
	definitions.
	* config/s390/vx-builtins.md ("vec_sld<mode>", "vec_sldw<mode>"):
	Rename UNSPEC_VEC_SLDB to UNSPEC_VEC_SLDBYTE.
	("vec_sldb<mode>", "vec_srdb<mode>"): New insn definitions.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	("*vec_splats_bswap_vec<mode>", "*vec_splats_bswap_elem<mode>"):
	New insn definition.
	* config/s390/vx-builtins.md (V_HW_HSD): Move to ...
	* config/s390/vector.md (V_HW_HSD): ... here.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/vecintrin.h: Map vec_vster low-level builtins to vec_vler.
	* config/s390/vx-builtins.md ("*vec_insert_and_zero_bswap<mode>")
	("*vec_set_bswap_elem<mode>", "*vec_set_bswap_vec<mode>")
	("*vec_extract_bswap_vec<mode>", "*vec_extract_bswap_elem<mode>"):
	New insn definitions.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: Add new builtin function type.
	* config/s390/s390-builtins.def: Add overloaded builtin
	s390_vec_reve and low-level builtins for s390_vler and s390_vster.
	* config/s390/s390.md (UNSPEC_VEC_ELTSWAP): New constant definition.
	* config/s390/vecintrin.h (vec_reve): New builtin name definition.
	* config/s390/vx-builtins.md (V_HW_HSD): New mode iterator.
	("eltswap<mode>"): New expander.
	("*eltswapv16qi", "*eltswap<mode>", "*eltswap<mode>_emu"): New
	insn definitions.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: Add new builtin function types.
	* config/s390/s390-builtins.def: Add overloaded builtin
	s390_vec_revb. Add low-level builtins for vlbr and vstbr
	instructions.
	* config/s390/vecintrin.h (vec_revb): New builtin name definition.
	* config/s390/vector.md (VT_HW_HSDT): New mode iterator.
	("bswap<mode>"): New expander.
	("*bswap<mode>", "*bswap<mode>_emu"): New insn definitions.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtins.def (B_VXE2): New builtin flag definition.
	* config/s390/s390-c.c (s390_cpu_cpp_builtins_internal): Increment
	vector builtin version number in __VEC__.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.md (VX_CONV_BFP, VX_CONV_INT): New mode
	iterators.
	(SFSI): New mode attribute.
	("*fixuns_truncdfdi2_vx", "*fix_truncdfdi2_bfp_z13")
	("*floatunsdidf2_z13", ): Add support for 32 bit conversions and
	rename to ...
	("*fixuns_trunc<VX_CONV_BFP:mode><VX_CONV_INT:mode>2_z13")
	("*fix_trunc<VX_CONV_BFP:mode><VX_CONV_INT:mode>2_bfp_z13")
	("*floatuns<VX_CONV_INT:mode><VX_CONV_BFP:mode>2_z13"): ... these.
	("floatsi<mode>2"): Add wcefb instruction.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.md ("xde"): Extend mode attribute to vector types.
	* config/s390/vector.md (VX_VEC_CONV_BFP, VX_VEC_CONV_INT): New
	mode iterators.
	("floatv2div2df2", "floatunsv2div2df2", "fix_truncv2dfv2di2")
	("fixuns_truncv2dfv2di2"): Enhance with mode iterator to also
	support 32 bit fp-int conversions. Rename to ...
	("float<VX_VEC_CONV_INT:mode><VX_VEC_CONV_BFP:mode>2")
	("floatuns<VX_VEC_CONV_INT:mode><VX_VEC_CONV_BFP:mode>2")
	("fix_trunc<VX_VEC_CONV_BFP:mode><VX_VEC_CONV_INT:mode>2")
	("fixuns_trunc<VX_VEC_CONV_BFP:mode><VX_VEC_CONV_INT:mode>2"):
	... to these.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_rtx_costs): Do not add extra costs for
	if-then-else constructs if we can use the select instruction.
	* config/s390/s390.md ("*mov<mode>cc"): Add the new instructions.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.md ("*popcountdi_arch13_cc")
	("*popcountdi_arch13_cconly", "*popcountdi_arch13"): New insn
	definition.
	("*popcount<mode>", "popcountdi2", "popcountsi2", "popcounthi2"):
	Append _z196 to make it ...
	("*popcount<mode>_z196", "popcountdi2_z196", "popcountsi2_z196")
	("popcounthi2_z196"): ... this.
	("popcountdi2_z196"): Remove TARGET_64BIT from the insn condition.
	("popcountdi2", "popcountsi2", "popcounthi2"): New expanders.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_canonicalize_comparison): Convert
	certain compares for arch13 in order to make use of the condition
	code result produced by the new instructions.
	(s390_rtx_costs): Adjust the costs for nnrk, nngrk, nork, nogrk,
	nxrk, and nxgrk instruction patterns.
	* config/s390/s390.md (ANDOR, bitops_name, inv_bitops_name)
	(inv_no): Add new code iterator together with some attributes.
	("*andc_split_<mode>"): Disable splitter for arch13.
	("*<ANDOR:bitops_name>c<GPR:mode>_cc")
	("*<ANDOR:bitops_name>c<GPR:mode>_cconly")
	("*<ANDOR:bitops_name>c<GPR:mode>")
	("*n<ANDOR:inv_bitops_name><GPR:mode>_cc")
	("*n<ANDOR:inv_bitops_name><mode>_cconly")
	("*n<ANDOR:inv_bitops_name><mode>", "*nxor<GPR:mode>_cc")
	("*nxor<mode>_cconly", "*nxor<mode>"): New insn definitions.

2019-04-02  Andreas Krebbel  <krebbel@linux.ibm.com>

	* common/config/s390/s390-common.c (processor_flags_table): New
	entry for arch13.
	* config.gcc: Support arch13 with the --with-arch= configure flag.
	* config/s390/driver-native.c (s390_host_detect_local_cpu):
	* config/s390/s390-opts.h (enum processor_type): Add PROCESSOR_ARCH13.
	* config/s390/s390.c (s390_get_sched_attrmask)
	(s390_get_unit_mask): Add PROCESSOR_ARCH13.
	* config/s390/s390.h (enum processor_flags): Add PF_VXE2 and PF_ARCH13.
	* config/s390/s390.md (TARGET_CPU_ARCH13, TARGET_CPU_ARCH13_P)
	(TARGET_CPU_VXE2, TARGET_CPU_VXE2_P, TARGET_ARCH13)
	(TARGET_ARCH13_P, TARGET_VXE2, TARGET_VXE2_P): New macro
	definitions.
	* config/s390/s390.opt: Support arch13 as processor type in
	command line options.

2019-04-02  Martin Liska  <mliska@suse.cz>

	PR translation/89912
	* params.def (PARAM_GRAPHITE_MAX_ARRAYS_PER_SCOP):
	Fix param description of graphite-max-arrays-per-scop.

2019-04-02  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/linux64.h (ASAN_REJECT_SPEC): New macro.
	(ASAN_CC1_SPEC): Use it in 64-bit mode.
	* config/sparc/sol2.h (ASAN_REJECT_SPEC): Remove superfluous colon.

2019-04-01  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/85412
	* sel-sched.c (sel_sched_region): Assign reset_sched_cycles_p before
	sel_sched_region_1, not after.

2019-04-01  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/86928
	* sel-sched-ir.c (sel_redirect_edge_and_branch_force): Invoke
	compute_live if necessary.
	(sel_redirect_edge_and_branch): Likewise.

2019-04-01  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/89865
	* ira-costs.c (process_bb_node_for_hard_reg_moves): Skip hard
	register if it is a part of small class.

2019-04-01  Andrey Belevantsev  <abel@ispras.ru>

	PR rtl-optimization/87273
	* sel-sched-ir.c (merge_fences): Remove assert.

2019-04-01  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/46590
	* domwalk.h (dom_walker::dom_walker): Consolidate constructors.
	(dom_walker::m_reachability): Add in place of...
	(dom_walker::m_skip_unreachable_blocks): ...this.
	* domwalk.c (dom_walker::dom_walker): Consoliate constructors.
	Move complex initialization ...
	(dom_walker::walk): Here.  Especially compute m_bb_to_rpo
	lazily and initialize edge flags on each invocation.
	(dom_walker::bb_reachable): Use m_reachability.

2019-04-01  Martin Liska  <mliska@suse.cz>

	PR driver/89861
	* opt-suggestions.c (option_proposer::build_option_suggestions):
	Add variant without any argument in order to provide better
	hints.

2019-04-01  Richard Biener  <rguenther@suse.de>

	PR c/71598
	* gimple.c: Include langhooks.h.
	(gimple_get_alias_set): Treat enumeral types as the underlying
	integer type.

2019-03-29  Kugan Vivekanandarajah  <kuganv@linaro.org>
	    Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/89862
	* rtl.h (word_register_operation_p): Exclude CONST_INT from operations
	that operates on the full registers for WORD_REGISTER_OPERATIONS
	architectures.

2019-03-29  Jim Wilson  <jimw@sifive.com>

	* common/config/riscv/riscv-common.c (riscv_parse_arch_string):
	Clear MASK_RVC and then set if C subset supported.

2019-03-29  Jakub Jelinek  <jakub@redhat.com>

	PR c/89872
	* gimplify.c (gimplify_compound_literal_expr): Don't optimize a
	non-addressable complit into its initializer if it is volatile.

2019-03-29  Roman Zhuykov  <zhroma@ispras.ru>

	* opts-common.c (integral_argument): Set errno properly in one case.

2019-03-29  Martin Liska  <mliska@suse.cz>

	* doc/invoke.texi: Remove -Wchkp from documentation.

2019-03-29  Martin Liska  <mliska@suse.cz>

	* dbgcnt.c (print_limit_reach): New function.
	(dbg_cnt): Use it.

2019-03-29  Martin Liska  <mliska@suse.cz>

	* dbgcnt.c (dbg_cnt_process_single_pair): Fix GNU coding style.
	(dbg_cnt_process_opt): Parse first tokens aas
	dbg_cnt_process_single_pair is also using strtok.

2019-03-29  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/87485
	* function.c (expand_function_end): Move stack_protect_epilogue
	before loading of return value into hard register(s).

2019-03-28  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89621
	* tree-inline.h (struct copy_body_data): Add
	dont_remap_vla_if_no_change flag.
	* tree-inline.c (remap_type_3, remap_type_2): New functions.
	(remap_type): Don't remap vla types if id->dont_remap_vla_if_no_change
	and remap_type_2 returns false.
	* omp-low.c (new_omp_context): Set ctx->cb.dont_remap_vla_if_no_change.
	Move ctx->cb.adjust_array_error_bounds setting to the outermost ctx
	only from where it is copied to nested contexts.

2019-03-28  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89865
	* config/i386/i386.md (RMW operation with LEA peephole):
	Use LEAMODE mode attribute instead of SWI mode iterator for
	LEA pattern.

2019-03-28  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89848
	* config/i386/i386.c (dimode_scalar_chain::make_vector_copies):
	Also process XEXP (src, 0) of a shift insn.

2019-03-28  David Malcolm  <dmalcolm@redhat.com>

	PR middle-end/89725
	* optinfo-emit-json.cc (optrecord_json_writer::optinfo_to_json):
	Use DECL_ASSEMBLER_NAME rather than get_fnname_from_decl.

2019-03-28  Jakub Jelinek  <jakub@redhat.com>

	* regcprop.c (copyprop_hardreg_forward_1): Remove redundant INSN_P
	test.
	(cprop_hardreg_bb, cprop_hardreg_debug): New functions.
	(pass_cprop_hardreg::execute): Use those.  Don't repeat bb processing
	immediately after first one with df_analyze in between, but rather
	process all bbs, queueing ones that need second pass in a worklist,
	df_analyze, process queued debug insn changes and if second pass is
	needed, process bbs from worklist, df_analyze, process queued debug
	insns again.

	* rtl.h (NONDEBUG_INSN_P): Define as NONJUMP_INSN_P or JUMP_P
	or CALL_P instead of INSN_P && !DEBUG_INSN_P.
	(INSN_P): Define using NONDEBUG_INSN_P or DEBUG_INSN_P.

2019-03-28  Jonathan Wakely  <jwakely@redhat.com>

	PR c/79022
	* gengtype.h (create_nested_ptr_option): Fix parameter names to match
	definition.

2019-03-27  Mateusz B  <mateuszb@poczta.onet.pl>

	PR target/85667
	* config/i386/i386.c (ix86_function_value_1): Call the newly added
	function for 32-bit MS_ABI.
	(function_value_ms_32): New function.

2019-03-27  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn.md (CC_SAVE_REG): New constant.
	(movdi): Call gen_movdi_symbol_save_scc.
	(gen_movdi_symbol_save_scc): New insn and split.

2019-03-27  Peter Bergner  <bergner@linux.ibm.com>

	PR rtl-optimization/89313
	* function.c (matching_constraint_num): New static function.
	(match_asm_constraints_1): Use it.  Fixup white space and comment.
	Don't replace inputs with non-matching constraints which conflict
	with early clobber outputs.

2019-03-27  Jeff Law  <law@redhat.com>

	PR rtl-optimization/87761
	PR rtl-optimization/89826
	* regcprop.c (copyprop_hardreg_forward_1): Move may_trap_p test
	slightly later.
	(pass_cprop_hardreg::execute): Call df_analyze after adding the
	note problem to get REG_DEAD/REG_UNUSED notes updated.

2019-03-27  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89463
	* tree-ssa-dce.c (remove_dead_stmt): Take output vector to
	queue edges to remove.
	(eliminate_unnecessary_stmts): Remove dead PHIs alongside
	dead stmts.  Delay edge removal until PHIs are removed to
	make debug-stmt creation not confused by seemingly degenerate
	PHIs.

2019-03-27  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.h: Rename NON_SPECIAL_REGS to GEN_OR_FLOAT_REGS
	throughout file.
	* config/rs6000/darwin.h: Likewise.
	* config/rs6000/rs6000.c: Likewise.

2019-03-27  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): Always
	assign rs6000_hard_regno_mode_ok_p[m][r].  Formatting.

2019-03-26  Andrew Waterman  <andrew@sifive.com>
	    Jim Wilson  <jimw@sifive.com>

	* config/riscv/generic.md (generic_alu, generic_load, generic_store)
	(generic_xfer, generic_branch, generic_imul, generic_idivsi)
	(generic_idivdi, generic_fmul_single, generic_fmul_double)
	(generic_fdiv, generic_fsqrt): Add check for generic tune.
	(generic_alu): Add auipc to type list.
	* config/riscv/riscv-opts.h (enum riscv_microarchitecture_type): New.
	(riscv_microarchitecture): Declare.
	* config/riscv/riscv-protos.h (riscv_store_data_bypass_p): Declare.
	* config/riscv/riscv.c (struct riscv_cpu_info): Add microarchitecture
	field.
	(riscv_microarchitecture): New.
	(sifive_7_tune_info): New.
	(riscv_cpu_info_table): Add microarchitecture value for rocket and
	size.  Add sifive-3-series, sifive-5-series, and sifive-7-series
	entries.
	(riscv_store_data_bypass_p): New.
	(riscv_option_override): Set riscv_microarchitecture from
	cpu->microarchitecture.
	* config/riscv/riscv.md: Include sifive-7.md.
	(type): Add auipc.
	(tune): New.
	(auipc<mode>): Change type to auipc.
	(restore_stack_nonlocal): New.
	* config/riscv/sifive-7.md: New.
	* doc/invoke.texi (RISC-V Options): Update mtune docs.

2019-03-26  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89827
	* config/i386/i386.c (dimode_scalar_chain::convert_reg):
	Also process XEXP (src, 0) of a shift insn.

2019-03-26  Richard Biener  <rguenther@suse.de>

	* tree-inline.c (remap_gimple_stmt): Cache gimple_block.
	(copy_debug_stmt): Likewise.
	(expand_call_inline): Likewise.
	(copy_bb): Avoid redundant lookup & set of gimple_block.
	* gimple-low.c (lower_gimple_return): Likewise.
	(lower_builtin_setjmp): Likewise.

2019-03-26  Jakub Jelinek  <jakub@redhat.com>

	* hash-table.h (hash_table::m_gather_mem_stats): If GATHER_STATISTICS
	is constant 0, turn into static const data member initialized to false.
	(hash_table::hash_table): Only initialize m_gather_mem_stats #if
	GATHER_STATISTICS.  Add ATTRIBUTE_UNUSED to gather_mem_stats param.

2019-03-26  Jason Merrill  <jason@redhat.com>
	    Jakub Jelinek  <jakub@redhat.com>

	* mem-stats.h (mem_alloc_description::unregister_descriptor): New
	method.
	(mem_alloc_description::release_object_overhead): Fix comment typos.
	* hash-table.h (hash_table::~hash_table): Call
	release_instance_overhead only if m_entries is non-NULL, otherwise
	call unregister_descriptor.

2019-03-26  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/81740
	* tree-vect-data-refs.c (vect_analyze_data_ref_dependence):
	In case of outer loop vectorization, check for backward dependence
	at the inner loop if outer loop dependence is reversed.

2019-03-26  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_init_hard_regno_mode_ok): Correct
	rs6000_vector_mem init.  Correct wI and wJ comment.

2019-03-25  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/88347
	PR rtl-optimization/88423
	* sched-deps.c (sched_analyze_insn): Take into account that for
	tablejumps the barrier appears after a label and a jump_table_data.

2019-03-25  Martin Sebor  <msebor@redhat.com>

	PR c/89812
	* c-common.c (check_user_alignment): Rename local.  Correct maximum
	alignment in diagnostic.  Avoid assuming argument fits in SHWI,
	convert it to UHWI when it fits.

2019-03-25  Johan Karlsson  <johan.karlsson@enea.com>

	PR debug/86964
	* dwarf2out.c (premark_used_variables): New function.
	(prune_unused_types_walk): Do not mark not premarked external
	variables.
	(prune_unused_types): Call premark_used_variables.

2019-03-25  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/89676
	* lra-constraints.c (curr_insn_transform): Do match reload for
	early clobbers when the match was successful only for different
	registers.

2019-03-25  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (Common Type Attributes): Document vector_size.
	(Common Variable Attributes): Mention size constraint.  Correct
	quoting and typos.
	(Vector Extensions): Use @dfn when defining bas type.  Clarify
	base type and size constraints.

2019-03-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89789
	* tree-ssa-sccvn.c (set_ssa_val_to): Do not allow lattice
	changes from non-undefined back to undefined.

2019-03-25  Thomas Otto  <thomas.otto@pdv-fs.de>

	* dwarf2out.c (comp_dir_string): cached_wd could be set to both a
	heap string and a gc string, but since this variable is unknown to
	ggc the gc string might get reused and corrupted. Fixed by always
	using a heap string.

2019-03-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89779
	* tree-ssa-loop-ivopts.c (remove_unused_ivs): Return
	to remove IV defs, delay actual removal.
	(tree_ssa_iv_optimize_loop): Likewise.  Avoid SCEV reset.
	(tree_ssa_iv_optimize): Remove eliminated IV defs at the
	very end, properly also reset loop control IV information.

2019-03-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89802
	* tree-ssa-math-opts.c (convert_mult_to_fma_1): Properly
	move EH data to folded stmt.

2019-03-25  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: Remove few unused types and
	fix sort order for others.

2019-03-25  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-c.c (s390_fn_types_compatible): Print the
	expected and found types with -mdebug during builtin matching.

2019-03-25  Richard Biener  <rguenther@suse.de>

	PR middle-end/89790
	* fold-const.c (operand_equal_p): Revert last change with
	updated comment.

2019-03-24  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_legitimize_tls_address): Add REG_EQUAL
	notes for the result of the __tls_get_addr calls.
	* config/rs6000/rs6000.md (unspec UNSPEC_TLS_GET_ADDR): New.

2019-03-24  Jeff Law  <law@redhat.com>

	* config/bfin/bfin.md (movpdi): Fix length for alternative 1.

	PR rtl-optimization/87761
	* regcprop.c (copyprop_hardreg_forward_1): Check may_trap_p on SET,
	not INSN.  Also check RTX_FRAME_RELATED_P.  Queue insns for DF rescan
	as needed.
	(pass_cprop_hardreg::execute): Add df note problem and defer insn
	rescans.  Reprocess blocks as needed, calling df_analyze before
	reprocessing.  Always call df_analyze before fixing up debug bind
	insns.

2019-03-23  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/xmmintrin.h (_mm_movemask_pi8): Implement for 32-bit
	big endian.

2019-03-22  Andrew Pinski  <apinski@marvell.com>

	* config/aarch64/aarch64.md (zero_extendsidi2_aarch64): Fix type
	attrribute for uxtw.

2019-03-26  Jeff Law  <law@redhat.com>

	PR rtl-optimization/87761
	* config/mips/mips-protos.h (mips_split_move): Add new argument.
	(mips_emit_move_or_split): Pass NULL for INSN into mips_split_move.
	(mips_split_move): Accept new INSN argument.  Try to forward SRC
	into the next instruction.
	(mips_split_move_insn): Pass INSN through to mips_split_move.

2019-03-22  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/89676
	* lra-constraints.c (curr_insn_transform): Do match reload for
	early clobbers even if the match was successful.

2019-03-22  Jakub Jelinek  <jakub@redhat.com>

	PR c++/87481
	* doc/invoke.texi (-fconstexpr-ops-limit=): Document.

2019-03-22  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/mmintrin.h (_mm_sub_pi32): Fix typo.

2019-03-22  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/sse.md (<avx512>_fmadd_<mode>_mask3<round_name>,
	<avx512>_fmsub_<mode>_mask3<round_name>,
	<avx512>_fnmadd_<mode>_mask3<round_name>,
	<avx512>_fnmsub_<mode>_mask3<round_name>,
	avx512f_vmfmadd_<mode>_mask3<round_name>,
	avx512f_vmfmsub_<mode>_mask3<round_name>,
	*avx512f_vmfnmadd_<mode>_mask3<round_name>): Use <round_nimm_predicate>
	instead of register_operand and %v instead of v for match_operand 1.
	(avx512f_vmfnmsub_<mode>_mask3<round_name>): Rename to ...
	(*avx512f_vmfnmsub_<mode>_mask3<round_name>): ... this.  Use
	<round_nimm_predicate> instead of register_operand and %v instead of v
	for match_operand 1.

	* config/i386/sse.md (<avx512>_fmadd_<mode>_mask<round_name>,
	<avx512>_fmadd_<mode>_mask3<round_name>,
	<avx512>_fmsub_<mode>_mask<round_name>,
	<avx512>_fmsub_<mode>_mask3<round_name>,
	<avx512>_fnmadd_<mode>_mask<round_name>,
	<avx512>_fnmadd_<mode>_mask3<round_name>,
	<avx512>_fnmsub_<mode>_mask<round_name>,
	<avx512>_fnmsub_<mode>_mask3<round_name>,
	<avx512>_fmaddsub_<mode>_mask<round_name>,
	<avx512>_fmaddsub_<mode>_mask3<round_name>,
	<avx512>_fmsubadd_<mode>_mask<round_name>,
	<avx512>_fmsubadd_<mode>_mask3<round_name>): Use
	<round_nimm_predicate> instead of nonimmediate_operand.
	(fmai_vmfmadd_<mode><round_name>, fmai_vmfmsub_<mode><round_name>,
	fmai_vmfnmadd_<mode><round_name>, fmai_vmfnmsub_<mode><round_name>):
	Use register_operand instead of <round_nimm_predicate> for the
	operand that needs to match output.
	(*fmai_fmadd_<mode>, *fmai_fmsub_<mode>,
	*fmai_fnmadd_<mode><round_name>, *fmai_fnmsub_<mode><round_name>):
	Likewise.  Formatting fixes.

	PR target/89784
	* config/i386/i386.c (enum ix86_builtins): Remove
	IX86_BUILTIN_VFMSUBSD3_MASK3 and IX86_BUILTIN_VFMSUBSS3_MASK3.
	* config/i386/i386-builtin.def (__builtin_ia32_vfmaddsd3_mask,
	__builtin_ia32_vfmaddsd3_mask3, __builtin_ia32_vfmaddsd3_maskz,
	__builtin_ia32_vfmsubsd3_mask3, __builtin_ia32_vfmaddss3_mask,
	__builtin_ia32_vfmaddss3_mask3, __builtin_ia32_vfmaddss3_maskz,
	__builtin_ia32_vfmsubss3_mask3): New builtins.
	* config/i386/sse.md (avx512f_vmfmadd_<mode>_mask<round_name>,
	avx512f_vmfmadd_<mode>_mask3<round_name>,
	avx512f_vmfmadd_<mode>_maskz_1<round_name>,
	*avx512f_vmfmsub_<mode>_mask<round_name>,
	avx512f_vmfmsub_<mode>_mask3<round_name>,
	*avx512f_vmfmasub_<mode>_maskz_1<round_name>,
	*avx512f_vmfnmadd_<mode>_mask<round_name>,
	*avx512f_vmfnmadd_<mode>_mask3<round_name>,
	*avx512f_vmfnmadd_<mode>_maskz_1<round_name>,
	*avx512f_vmfnmsub_<mode>_mask<round_name>,
	avx512f_vmfnmsub_<mode>_mask3<round_name>,
	*avx512f_vmfnmsub_<mode>_maskz_1<round_name>): New define_insns.
	(avx512f_vmfmadd_<mode>_maskz<round_expand_name>): New define_expand.
	* config/i386/avx512fintrin.h (_mm_mask_fmadd_sd, _mm_mask_fmadd_ss,
	_mm_mask3_fmadd_sd, _mm_mask3_fmadd_ss, _mm_maskz_fmadd_sd,
	_mm_maskz_fmadd_ss, _mm_mask_fmsub_sd, _mm_mask_fmsub_ss,
	_mm_mask3_fmsub_sd, _mm_mask3_fmsub_ss, _mm_maskz_fmsub_sd,
	_mm_maskz_fmsub_ss, _mm_mask_fnmadd_sd, _mm_mask_fnmadd_ss,
	_mm_mask3_fnmadd_sd, _mm_mask3_fnmadd_ss, _mm_maskz_fnmadd_sd,
	_mm_maskz_fnmadd_ss, _mm_mask_fnmsub_sd, _mm_mask_fnmsub_ss,
	_mm_mask3_fnmsub_sd, _mm_mask3_fnmsub_ss, _mm_maskz_fnmsub_sd,
	_mm_maskz_fnmsub_ss, _mm_mask_fmadd_round_sd, _mm_mask_fmadd_round_ss,
	_mm_mask3_fmadd_round_sd, _mm_mask3_fmadd_round_ss,
	_mm_maskz_fmadd_round_sd, _mm_maskz_fmadd_round_ss,
	_mm_mask_fmsub_round_sd, _mm_mask_fmsub_round_ss,
	_mm_mask3_fmsub_round_sd, _mm_mask3_fmsub_round_ss,
	_mm_maskz_fmsub_round_sd, _mm_maskz_fmsub_round_ss,
	_mm_mask_fnmadd_round_sd, _mm_mask_fnmadd_round_ss,
	_mm_mask3_fnmadd_round_sd, _mm_mask3_fnmadd_round_ss,
	_mm_maskz_fnmadd_round_sd, _mm_maskz_fnmadd_round_ss,
	_mm_mask_fnmsub_round_sd, _mm_mask_fnmsub_round_ss,
	_mm_mask3_fnmsub_round_sd, _mm_mask3_fnmsub_round_ss,
	_mm_maskz_fnmsub_round_sd, _mm_maskz_fnmsub_round_ss): New intrinsics.

2019-03-21  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/89350
	* builtins.c (compute_objsize): Also ignore offsets whose upper
	bound is negative.
	* gimple-ssa-warn-restrict.c (builtin_memref): Add new member.
	(builtin_memref::builtin_memref): Initialize new member.
	Allow EXPR to be null.
	(builtin_memref::extend_offset_range): Replace local with a member.
	Avoid assuming pointer offsets are unsigned.
	(builtin_memref::set_base_and_offset): Determine base object
	before computing offset range.
	(builtin_access::builtin_access): Handle memset.
	(builtin_access::generic_overlap): Replace local with a member.
	(builtin_access::strcat_overlap): Same.
	(builtin_access::overlap): Same.
	(maybe_diag_overlap): Same.
	(maybe_diag_access_bounds): Same.
	(wrestrict_dom_walker::check_call): Handle memset.
	(check_bounds_or_overlap): Same.

2019-03-21  Jan Hubicka  <hubicka@ucw.cz>
	    Jakub Jelinek  <jakub@redhat.com>

	PR lto/89692
	* tree.c (fld_type_variant, fld_incomplete_type_of,
	fld_process_array_type): Call fld->pset.add and don't call
	add_tree_to_fld_list if it returns true.
	(free_lang_data_in_type): Similarly with self-recursive call.  Purge
	non-marked types from TYPE_NEXT_VARIANT list.
	(find_decls_types_r): Call fld_worklist_push for TYPE_CANONICAL (t).

2019-03-21  Jakub Jelinek  <jakub@redhat.com>

	* hash-table.h (hash_table): Add Lazy template parameter defaulted
	to false, if true, don't alloc_entries during construction, but defer
	it to the first method that needs m_entries allocated.
	(hash_table::hash_table, hash_table::~hash_table,
	hash_table::alloc_entries, hash_table::find_empty_slot_for_expand,
	hash_table::too_empty_p, hash_table::expand, hash_table::empty_slow,
	hash_table::clear_slot, hash_table::traverse_noresize,
	hash_table::traverse, hash_table::iterator::slide): Adjust all methods.
	* hash-set.h (hash_set): Add Lazy template parameter defaulted to
	false.
	(hash_set::contains): If Lazy is true, use find_slot_with_hash with
	NO_INSERT instead of find_with_hash.
	(hash_set::traverse, hash_set::iterator, hash_set::iterator::m_iter,
	hash_set::m_table): Add Lazy to template params of hash_table.
	(gt_ggc_mx, gt_pch_nx): Use false as Lazy in hash_set template param.
	* attribs.c (test_attribute_exclusions): Likewise.
	* hash-set-tests.c (test_set_of_strings): Add iterator tests for
	hash_set.  Add tests for hash_set with Lazy = true.

2019-03-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89779
	* tree.c (tree_nop_conversion): Consolidate and fix defensive
	checks with respect to released SSA names now having error_mark_node
	type.
	* fold-const.c (operand_equal_p): Likewise.

2019-03-20  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/89775
	* config/s390/s390.c (global_not_special_regno_p): Move to make it
	available to ...
	(s390_optimize_register_info): Use global_not_special_regno_p to
	check for global regs.

2019-03-20  Jakub Jelinek  <jakub@redhat.com>

	PR target/89752
	* lra-constraints.c (process_alt_operands) <reg>: For BLKmode, don't
	update this_alternative nor this_alternative_set.

2019-03-19  Jim Wilson  <jimw@sifive.com>

	PR target/89411
	* config/riscv/riscv.c (riscv_valid_lo_sum_p): New arg x.  New locals
	align, size, offset.  Use them to handle a BLKmode reference.  Update
	comment.
	(riscv_classify_address): Pass info->offset to riscv_valid_lo_sum_p.

2019-03-19  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89768
	* loop-unroll.c (unroll_loop_constant_iterations): Use gen_int_mode
	instead of GEN_INT.
	(unroll_loop_runtime_iterations): Likewise.

2019-03-19  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/89644
	* tree-ssa-strlen.c (handle_builtin_stxncpy): Use full_string_p
	rather than endptr as an indicator of nul-termination.

	PR tree-optimization/89644
	* tree-ssa-strlen.c (handle_builtin_stxncpy): Consider unterminated
	arrays in determining sequence sizes in strncpy and stpncpy.

2019-03-19  Martin Liska  <mliska@suse.cz>

	PR middle-end/89737
	* predict.c (combine_predictions_for_bb): Empty likely_edges and
	unlikely_edges if there's an edge that belongs to both these sets.

2018-03-19  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/89746
	* config/rs6000/rs6000.md (fix_trunc<mode>si2_stfiwx): If we have a
	non-TARGET_MFCRF target, and the dest is memory but not 32-bit aligned,
	go via a stack temporary.

2019-03-19  Jakub Jelinek  <jakub@redhat.com>

	PR target/89378
	* config/mips/mips.c (mips_expand_vec_cond_expr): Use gen_lowpart
	instead of gen_rtx_SUBREG.
	* config/mips/mips-msa.md (vec_extract<mode><unitmode>): Likewise.

2019-03-19  Richard Biener  <rguenther@suse.de>

	PR debug/88389
	* opts.c (finish_options): Disable -gsplit-dwarf when doing LTO.

2019-03-19  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/87809
	PR lto/89335
	* tree.c (free_lang_data_in_decl): Do not free context of C++
	destrutors.

2019-03-19  Jakub Jelinek  <jakub@redhat.com>

	PR target/89506
	* config/arm/arm.md (cmpsi2_addneg): Swap the alternatives and use
	subs for the first alternative except when operands[3] is 1.

	PR target/89752
	* gimplify.c (gimplify_asm_expr): For output argument with
	TREE_ADDRESSABLE type, clear allows_reg if it allows memory, otherwise
	diagnose error.

2019-03-19  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/89753
	* loop-unroll.c (decide_unroll_constant_iterations): Make guard for
	explicit unrolling factor even more robust.

2019-03-19  Jakub Jelinek  <jakub@redhat.com>

	PR target/89726
	* config/i386/i386.c (ix86_expand_floorceildf_32): In ceil
	compensation use x2 += 1 instead of x2 -= -1 and when honoring
	signed zeros, do another copysign after the compensation.

2019-03-18  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/89720
	* tree-vrp.c (vrp_prop::check_mem_ref): Treat range with max < min
	more conservatively, the same as anti-range.

2019-03-18  Richard Biener  <rguenther@suse.de>

	PR middle-end/88945
	* tree-ssanames.c (release_ssa_name_fn): For released SSA names
	use a TREE_TYPE of error_mark_node to avoid ICEs when dumping
	basic-blocks that are removed.  Remove restoring SSA_NAME_VAR.
	* tree-outof-ssa.c (eliminate_useless_phis): Remove redundant checking.

2019-03-18  Andrew Stubbs  <ams@codesourcery.com>

	* config/gcn/gcn-run.c (struct output): Make next_output unsigned.
	Extend queue to 1024 entries.
	Add "consumed" field.
	(gomp_print_output): Remove print_index parameter.
	Add final parameter.
	Change limit to unsigned.
	Use consumed field to implement circular buffer.
	Detect interrupted print in final pass.
	Flush output at the end.
	(run): Update gomp_print_output usage.
	(main): Initialize kernargs->output_data.consumed.

2019-03-18  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-loop.c (vect_estimate_min_profitable_iters): Fix the
	calculation of the minimum number of scalar iterations for
	fully-predicated loops.

2019-03-18  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/89546
	* tree-sra.c (propagate_subaccesses_across_link): Requeue new_acc if
	any propagation to its children took place.

2019-03-18  Andrew Burgess  <andrew.burgess@embecosm.com>

	PR target/89627
	* config/riscv/riscv.c (riscv_pass_fpr_single): Add offset
	parameter, and make use of it.
	(riscv_get_arg_info): Pass offset to riscv_pass_fpr_single.

2019-03-18  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.opt (mcode-density-frame): Get the inital value
	from TARGET_CODE_DENSITY_FRAME_DEFAULT.
	* config/arc/elf.h (TARGET_CODE_DENSITY_FRAME_DEFAULT): Define.
	* config/arc/linux.h (TARGET_CODE_DENSITY_FRAME_DEFAULT): Define.
	* config/arc/arc.md (pop_multi_fp_blink): Adjust constraints to
	match what the ops is doing.
	(push_multi_fp_blink): Likewise.
	* config/arc/arc.c (arc_override_options): Enable enter/leave when
	compiling for size and elf target.
	(arc_save_callee_enter): Adjust note to match what enter/leave
	operation does.

2019-03-18  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.md (tst_movb): Fix constraint.

2019-03-18  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc.c (TARGET_HAVE_SPECULATION_SAFE_VALUE): Define.

2019-03-18  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-protos.h (arc_adjust_reg_alloc_order): Declare.
	* config/arc/arc.c (arc_conditional_register_usage): Remove all
	reg_alloc_order references.
	(size_alloc_order): Define.
	(arc_adjust_reg_alloc_order): New function.
	* config/arc/arc.h (REG_ALLOC_ORDER): Proper define the register
	order.
	(ADJUST_REG_ALLOC_ORDER): Define.
	(HONOR_REG_ALLOC_ORDER): Likewise.

2019-03-18  Richard Biener  <rguenther@suse.de>

	PR target/87561
	* config/i386/i386.c (ix86_add_stmt_cost): Pessimize strided
	loads and stores a bit more.

2019-03-18  Richard Biener  <rguenther@suse.de>

	PR target/87561
	* config/i386/i386.c (ix86_add_stmt_cost): Apply strided
	load pessimization to stores as well.

2019-03-18  Andrey Belevantsev  <abel@ispras.ru>

	PR middle-end/86979
	* sel-sched.c (compute_av_set_at_bb_end): When we have an ineligible
	successor, use NULL as its av set.

2019-03-15  Segher Boessenkool  <segher@kernel.crashing.org>

	PR rtl-optimization/89721
	* lra-constraints (invariant_p): Return false if side_effects_p holds.

2019-03-15  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	PR target/87532
	* config/rs6000/rs6000-c.c (altivec_resolve_overloaded_builtin):
	When handling vec_extract, use modular arithmetic to allow
	constant selectors greater than vector length.
	* config/rs6000/rs6000.c (rs6000_expand_vector_extract): Allow
	V1TImode vectors to have constant selector values greater than 0.
	Use modular arithmetic to compute vector index.
	(rs6000_split_vec_extract_var): Use modular arithmetic to compute
	index for in-memory vectors.  Correct code generation for
	in-register vectors.
	(altivec_expand_vec_ext_builtin): Use modular arithmetic to
	compute index.

2019-03-15  Alexandre Oliva  <aoliva@redhat.com>

	PR c++/88534
	PR c++/88537
	* dwarf2out.c (generic_parameter_die): Follow DECL_INITIAL of
	VAR_DECL args.

2019-03-15  Jakub Jelinek  <jakub@redhat.com>

	PR c++/89709
	* tree.c (inchash::add_expr): Strip any location wrappers.
	* fold-const.c (operand_equal_p): Move stripping of location wrapper
	after hash verification.

	PR debug/89704
	* dwarf2out.c (add_const_value_attribute): Return false for MINUS,
	SIGN_EXTEND and ZERO_EXTEND.

2019-03-14  Jason Merrill  <jason@redhat.com>
	    Jakub Jelinek  <jakub@redhat.com>

	* hash-table.h (remove_elt_with_hash): Return if slot is NULL rather
	than if is_empty (*slot).
	* hash-set-tests.c (test_set_of_strings): Add tests for addition of
	existing elt and for elt removal.
	* hash-map-tests.c (test_map_of_strings_to_int): Add test for removal
	of already removed elt.

2019-03-15  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89650
	* config/i386/i386.c (remove_partial_avx_dependency): Handle
	REG_EH_REGION note.

2019-03-14  Martin Liska  <mliska@suse.cz>

	PR other/89712
	* doc/invoke.texi: Remove -fdump-class-hierarchy option.

2019-03-14  Richard Biener  <rguenther@suse.de>

	PR target/89711
	* config/i386/i386.c (make_resolver_func): Properly set
	DECL_CONTEXT on the RESULT_DECL.
	* config/rs6000/rs6000.c (make_resolver_func): Likewise.

2019-03-14  Richard Biener  <rguenther@suse.de>

	* gimple-pretty-print.c: Include cfgloop.h.
	(dump_gimple_phi): Adjust.
	(dump_gimple_bb_header): Dump loop header for GIMPLE.
	(pp_cfg_jump): Adjust.
	(dump_implicit_edges): Dump fallthru to next block for GIMPLE as well.
	* tree-cfg.c (build_gimple_cfg): Remove lower_phi_internal_fn call.
	(lower_phi_internal_fn): Remove.
	(verify_gimple_call): Remove IFN_PHI special-casing.
	(dump_function_to_file): Dump IL state.
	* tree-into-ssa.c (rewrite_add_phi_arguments): Revert changes
	done to deal with PHI nodes being present in non-SSA state.

2019-03-14  Jakub Jelinek  <jakub@redhat.com>

	PR ipa/89684
	* multiple_target.c (create_dispatcher_calls): Change
	references_to_redirect from vector of ipa_ref * to vector of ipa_ref.
	In the node->iterate_referring loop, push *ref rather than ref, call
	ref->remove_reference () and always pass 0 to iterate_referring.

	PR rtl-optimization/89679
	* expmed.c (expand_mult_const): Don't add a REG_EQUAL note if it
	would contain a paradoxical SUBREG.

2019-03-14  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89710
	* tree-ssa-loop-ch.c (should_duplicate_loop_header_p): Use
	safe_dyn_cast.

2019-03-14  Martin Liska  <mliska@suse.cz>

	* coverage.c (coverage_begin_function): Stream also
	end_column.
	* doc/gcov.texi: Document 2 new fields in JSON file.  Improve
	documentation about function declaration location.
	* gcov-dump.c (tag_function): Print whole range
	of function declaration.
	* gcov.c (struct function_info): Add end_column field.
	(function_info::function_info): Initialize it.
	(output_json_intermediate_file): Output {start,end}_column
	fields.
	(read_graph_file): Read end_column.

2019-03-14  Richard Biener  <rguenther@suse.de>

	PR middle-end/89698
	* fold-const.c (operand_equal_p): For INDIRECT_REF check
	that the access types are similar.

2019-03-14  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89703
	* tree-ssa-strlen.c (valid_builtin_call): Punt if stmt call types
	aren't compatible also with builtin_decl_explicit.  Check pure
	or non-pure status of BUILT_IN_STR{{,N}CMP,N{LEN,{CAT,CPY}{,_CHK}}}
	and BUILT_IN_STPNCPY{,_CHK}.

2019-03-14  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89523
	* config/i386/i386.c (ix86_print_operand): Handle 'M' to add
	addr32 prefix to VSIB address for X32.
	* config/i386/sse.md (*avx512pf_gatherpf<mode>sf_mask): Prepend
	"%M2" to opcode.
	(*avx512pf_gatherpf<mode>df_mask): Likewise.
	(*avx512pf_scatterpf<mode>sf_mask): Likewise.
	(*avx512pf_scatterpf<mode>df_mask): Likewise.
	(*avx2_gathersi<mode>): Prepend "%M3" to opcode.
	(*avx2_gathersi<mode>_2): Prepend "%M2" to opcode.
	(*avx2_gatherdi<mode>): Prepend "%M3" to opcode.
	(*avx2_gatherdi<mode>_2): Prepend "%M2" to opcode.
	(*avx2_gatherdi<mode>_3): Prepend "%M3" to opcode.
	(*avx2_gatherdi<mode>_4): Prepend "%M2" to opcode.`
	(*avx512f_gathersi<mode>): Prepend "%M4" to opcode.
	(*avx512f_gathersi<mode>_2): Prepend "%M3" to opcode.
	(*avx512f_gatherdi<mode>): Prepend "%M4" to opcode.
	(*avx512f_gatherdi<mode>_2): Prepend "%M3" to opcode.
	(*avx512f_scattersi<mode>): Prepend "%M0" to opcode.
	(*avx512f_scatterdi<mode>): Likewise.

2019-03-13  Vladimir Makarov  <vmakarov@redhat.com>

	PR target/85860
	* lra-constraints.c (inherit_in_ebb): Update
	potential_reload_hard_regs along with live_hard_regs.

2019-03-13  Jakub Jelinek  <jakub@redhat.com>

	PR debug/89498
	* dwarf2out.c (size_of_die): For dw_val_class_view_list always use
	DWARF_OFFSET_SIZE.
	(value_format): For dw_val_class_view_list never use DW_FORM_loclistx.

2019-03-13  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/89662
	* tree-vrp.c (vrp_prop::check_mem_ref): Avoid assuming every type
	has a size.

2019-03-13  Richard Biener  <rguenther@suse.de>

	PR middle-end/89677
	* tree-scalar-evolution.c (simplify_peeled_chrec): Do not
	throw FP expressions at tree-affine.

2019-03-14  Richard Biener  <rguenther@suse.de>

	* tree-pretty-print.c (dump_generic_node): For -gimple properly
	dump negative integer constants using _Literal (type) -num.

2019-03-13  Jakub Jelinek  <jakub@redhat.com>

	* ipa-param-manipulation.h (struct ipa_parm_adjustment): Remove
	nonlocal_value member.

	PR middle-end/88588
	* omp-simd-clone.c (ipa_simd_modify_stmt_ops): Handle PHI args.
	(ipa_simd_modify_function_body): Handle PHIs.

2019-03-12  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/s390.c (s390_option_override_internal): Use more
	aggressive inlining parameters.

2019-03-12  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/3906.md: New file.
	* config/s390/s390.c (MAX_SCHED_UNITS): Increase.
	(LONGRUNNING_THRESHOLD): Remove.
	(MAX_SCHED_MIX_SCORE): Decrease.
	(MAX_SCHED_MIX_DISTANCE): Decrease.
	(s390_bb_fallthru_entry_likely): Assume fallthru for less than likely.
	(struct s390_sched_state): New struct to hold scheduling state.
	(S390_SCHED_STATE_NORMAL): Remove.
	(S390_SCHED_STATE_CRACKED): Remove.
	(S390_SCHED_ATTR_MASK_GROUPOFTWO): Add.
	(s390_get_sched_attrmask): Use new attribute.
	(s390_get_unit_mask): Use new units.
	(s390_is_fpd): New function.
	(s390_is_fxd): New function.
	(s390_is_longrunning): New function.
	(s390_sched_score): Use new functions.
	(s390_sched_reorder): Likewise.
	(s390_sched_variable_issue): Rework and use new functions.
	(s390_sched_init): Use new functions.
	* config/s390/s390.h (s390_tune_attr): Add z14.
	* config/s390/s390.md: Add z14.

2019-03-12  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/2964.md: Update pipeline description.
	* config/s390/s390.c (MAX_SCHED_UNITS): Increase.
	(LONGRUNNING_THRESHOLD): Remove.
	(LATENCY_FACTOR): Remove.
	(s390_get_unit_mask): Add unit.
	(s390_sched_score): Use fxd/fpd.
	(s390_sched_variable_issue): Use fxd/fpd.

2019-03-12  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c: Reword an error message.

2019-03-12  Martin Jambor  <mjambor@suse.cz>

	* cgraph.c (cgraph_node::dump): Dump more info for former thunks,
	terminate with newline.

2019-03-12  Jakub Jelinek  <jakub@redhat.com>

	PR target/52726
	* config/s390/s390.md (tabort): Use %wd instead of
	HOST_WIDE_INT_PRINT_DEC in error message, reword to avoid two capital
	letters and periods.
	* config/tilepro/tilepro.c (tilepro_print_operand): Use %wd in
	output_operand_lossage instead of HOST_WIDE_INT_PRINT_DEC, replace
	's with %< and %>.

	PR middle-end/89663
	* builtins.c (expand_builtin_int_roundingfn,
	expand_builtin_int_roundingfn_2): Return NULL_RTX instead of
	gcc_unreachable if validate_arglist fails.

2019-03-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89664
	* tree-ssa-math-opts.c (execute_cse_reciprocals_1): Properly
	free the occurance tree after the early out.

2019-03-11  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89655
	PR bootstrap/89656
	* vr-values.c (vr_values::update_value_range): If
	old_vr->varying_p (), don't update it, make new_vr also VARYING
	and return false.

2019-03-11  Martin Liska  <mliska@suse.cz>

	* config/aarch64/aarch64.c (aarch64_override_options_internal):
	Fix double string quoting.

2019-03-11  Martin Liska  <mliska@suse.cz>

	* collect-utils.c (collect_wait): Wrap apostrophes
	in gcc internal format with %'.
	* collect2.c (main): Likewise.
	(scan_prog_file): Likewise.
	(scan_libraries): Likewise.
	* config/i386/i386.c (ix86_expand_call): Likewise.
	(ix86_handle_interrupt_attribute): Likewise.
	* config/nds32/nds32-intrinsic.c (nds32_expand_builtin_impl): Likewise.
	* config/nds32/nds32.c (nds32_insert_attributes): Likewise.
	* config/rl78/rl78.c (rl78_handle_saddr_attribute): Likewise.
	* lto-wrapper.c (find_crtoffloadtable): Likewise.
	* symtab.c (symtab_node::verify_base): Likewise.
	* tree-cfg.c (verify_gimple_label): Likewise.
	* tree.c (verify_type_variant): Likewise.

2019-03-11  Martin Liska  <mliska@suse.cz>

	* builtins.c (expand_builtin_thread_pointer): Wrap an option name
	in a string format message and fix GNU coding style.
	(expand_builtin_set_thread_pointer): Likewise.
	* common/config/aarch64/aarch64-common.c
	(aarch64_rewrite_selected_cpu): Likewise.
	* common/config/alpha/alpha-common.c (alpha_handle_option): Likewise.
	* common/config/arc/arc-common.c (arc_handle_option): Likewise.
	* common/config/arm/arm-common.c (arm_parse_fpu_option): Likewise.
	* common/config/bfin/bfin-common.c (bfin_handle_option): Likewise.
	* common/config/i386/i386-common.c (ix86_handle_option): Likewise.
	* common/config/ia64/ia64-common.c (ia64_handle_option): Likewise.
	* common/config/m68k/m68k-common.c (m68k_handle_option): Likewise.
	* common/config/msp430/msp430-common.c (msp430_handle_option): Likewise.
	* common/config/nds32/nds32-common.c (nds32_handle_option): Likewise.
	* common/config/powerpcspe/powerpcspe-common.c (rs6000_handle_option):
	Likewise.
	* common/config/riscv/riscv-common.c
	(riscv_subset_list::parsing_subset_version): Likewise.
	(riscv_subset_list::parse_std_ext): Likewise.
	(riscv_subset_list::parse_sv_or_non_std_ext): Likewise.
	(riscv_subset_list::parse): Likewise.
	* common/config/rs6000/rs6000-common.c (rs6000_handle_option): Likewise.
	* config/aarch64/aarch64.c (aarch64_parse_one_option_token): Likewise.
	(aarch64_override_options_internal): Likewise.
	(aarch64_validate_mcpu): Likewise.
	(aarch64_validate_march): Likewise.
	(aarch64_validate_mtune): Likewise.
	(aarch64_override_options): Likewise.
	* config/alpha/alpha.c (alpha_option_override): Likewise.
	* config/arc/arc.c (arc_init): Likewise.
	(parse_mrgf_banked_regs_option): Likewise.
	(arc_override_options): Likewise.
	(arc_expand_builtin_aligned): Likewise.
	* config/arm/arm-builtins.c (arm_expand_neon_builtin): Likewise.
	(arm_expand_builtin): Likewise.
	* config/arm/arm.c (arm_option_check_internal): Likewise.
	(arm_configure_build_target): Likewise.
	(arm_option_override): Likewise.
	(arm_options_perform_arch_sanity_checks): Likewise.
	(arm_handle_cmse_nonsecure_entry): Likewise.
	(arm_handle_cmse_nonsecure_call): Likewise.
	(arm_tls_referenced_p): Likewise.
	(thumb1_expand_prologue): Likewise.
	* config/avr/avr.c (avr_option_override): Likewise.
	* config/bfin/bfin.c (bfin_option_override): Likewise.
	* config/c6x/c6x.c (c6x_option_override): Likewise.
	* config/cr16/cr16.c (cr16_override_options): Likewise.
	* config/cris/cris.c (cris_option_override): Likewise.
	* config/csky/csky.c (csky_handle_isr_attribute): Likewise.
	* config/darwin-c.c (macosx_version_as_macro): Likewise.
	* config/darwin.c (darwin_override_options): Likewise.
	* config/frv/frv.c (frv_expand_builtin): Likewise.
	* config/h8300/h8300.c (h8300_option_override): Likewise.
	* config/i386/i386.c (parse_mtune_ctrl_str): Likewise.
	(ix86_option_override_internal): Likewise.
	(warn_once_call_ms2sysv_xlogues): Likewise.
	(ix86_expand_prologue): Likewise.
	(split_stack_prologue_scratch_regno): Likewise.
	(ix86_warn_parameter_passing_abi): Likewise.
	* config/ia64/ia64.c (fix_range): Likewise.
	* config/m68k/m68k.c (m68k_option_override): Likewise.
	* config/microblaze/microblaze.c (microblaze_option_override): Likewise.
	* config/mips/mips.c (mips_emit_probe_stack_range): Likewise.
	(mips_set_compression_mode): Likewise.
	* config/mmix/mmix.c (mmix_option_override): Likewise.
	* config/mn10300/mn10300.c (mn10300_option_override): Likewise.
	* config/msp430/msp430.c (msp430_option_override): Likewise.
	* config/nds32/nds32.c (nds32_option_override): Likewise.
	* config/nios2/nios2.c (nios2_custom_check_insns): Likewise.
	(nios2_option_override): Likewise.
	(nios2_expand_custom_builtin): Likewise.
	* config/nvptx/mkoffload.c (main): Likewise.
	* config/nvptx/nvptx.c (diagnose_openacc_conflict): Likewise.
	* config/pa/pa.c (fix_range): Likewise.
	(pa_option_override): Likewise.
	* config/riscv/riscv.c (riscv_parse_cpu): Likewise.
	(riscv_option_override): Likewise.
	* config/rl78/rl78.c (rl78_option_override): Likewise.
	* config/rs6000/aix61.h: Likewise.
	* config/rs6000/aix71.h: Likewise.
	* config/rs6000/aix72.h: Likewise.
	* config/rs6000/driver-rs6000.c (elf_platform): Likewise.
	* config/rs6000/freebsd64.h: Likewise.
	* config/rs6000/linux64.h: Likewise.
	* config/rs6000/rs6000.c (rs6000_option_override_internal): Likewise.
	(rs6000_expand_zeroop_builtin): Likewise.
	(rs6000_expand_mtfsb_builtin): Likewise.
	(rs6000_expand_set_fpscr_rn_builtin): Likewise.
	(rs6000_expand_set_fpscr_drn_builtin): Likewise.
	(rs6000_invalid_builtin): Likewise.
	(rs6000_expand_split_stack_prologue): Likewise.
	* config/rs6000/rtems.h: Likewise.
	* config/rx/rx.c (valid_psw_flag): Likewise.
	(rx_expand_builtin): Likewise.
	* config/s390/s390-c.c (s390_resolve_overloaded_builtin): Likewise.
	* config/s390/s390.c (s390_expand_builtin): Likewise.
	(s390_function_profiler): Likewise.
	(s390_option_override_internal): Likewise.
	(s390_option_override): Likewise.
	* config/sh/sh.c (sh_option_override): Likewise.
	(sh_builtin_saveregs): Likewise.
	(sh_fix_range): Likewise.
	* config/sh/vxworks.h: Likewise.
	* config/sparc/sparc.c (sparc_option_override): Likewise.
	* config/spu/spu.c (spu_option_override): Likewise.
	(fix_range): Likewise.
	* config/visium/visium.c (visium_option_override): Likewise.
	(visium_handle_interrupt_attr): Likewise.
	* config/xtensa/xtensa.c (xtensa_option_override): Likewise.
	* dbgcnt.c (dbg_cnt_set_limit_by_name): Likewise.
	(dbg_cnt_process_opt): Likewise.
	* dwarf2out.c (output_dwarf_version): Likewise.
	* except.c (expand_eh_return): Likewise.
	* gcc.c (defined): Likewise.
	(driver_handle_option): Likewise.
	(process_command): Likewise.
	(compare_files): Likewise.
	(driver::prepare_infiles): Likewise.
	(driver::do_spec_on_infiles): Likewise.
	(driver::maybe_run_linker): Likewise.
	* omp-offload.c (oacc_parse_default_dims): Likewise.
	* opts-global.c (handle_common_deferred_options): Likewise.
	* opts.c (parse_sanitizer_options): Likewise.
	(common_handle_option): Likewise.
	(enable_warning_as_error): Likewise.
	* passes.c (enable_disable_pass): Likewise.
	* plugin.c (parse_plugin_arg_opt): Likewise.
	(default_plugin_dir_name): Likewise.
	* targhooks.c (default_expand_builtin_saveregs): Likewise.
	(default_pch_valid_p): Likewise.
	* toplev.c (init_asm_output): Likewise.
	(process_options): Likewise.
	(toplev::run_self_tests): Likewise.
	* tree-cfg.c (verify_gimple_call): Likewise.
	* tree-inline.c (inline_forbidden_p_stmt): Likewise.
	(tree_inlinable_function_p): Likewise.
	* var-tracking.c (vt_find_locations): Likewise.

2019-03-11  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390.c (s390_expand_builtin): Do the copy_to_reg not
	only on the else branch.

2019-03-11  Martin Liska  <mliska@suse.cz>

	* gcov.c (output_intermediate_json_line): Print function
	name of each line.
	(output_json_intermediate_file): Add new argument.
	* doc/gcov.texi: Document the change.

2019-03-11  Eric Botcazou  <ebotcazou@adacore.com>

	PR rtl-optimization/89588
	* loop-unroll.c (decide_unroll_constant_iterations): Make guard for
	explicit unrolling factor more robust.

2019-03-11  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89649
	* tree-vectorizer.h (vect_loop_versioning): Adjust prototype.
	* tree-vect-loop-manip.c (vect_do_peeling): Unset force_vectorize
	on the prolog and epilog loops.
	(vect_loop_versioning): Return copy of loop.
	* tree-vect-loop.c (vect_transform_loop): Unset force_vectorize
	on the non-vectorized version of the loop.

2019-03-10  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/68924
	* config/i386/sse.md (*vec_extractv2di_0_sse):
	Add (=r,x) alternative and corresponding splitter.

2019-03-10  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/85762
	PR tree-optimization/87008
	PR tree-optimization/85459
	* tree-sra.c (contains_vce_or_bfcref_p): New parameter, set the bool
	it points to if there is a type changing MEM_REF.  Adjust all callers.
	(build_accesses_from_assign): Disable total scalarization if
	contains_vce_or_bfcref_p returns true through the new parameter, for
	both rhs and lhs.

2019-03-09  Jakub Jelinek  <jakub@redhat.com>

	PR c/88568
	* attribs.c (handle_dll_attribute): Don't clear TREE_STATIC for
	dllimport on VAR_DECLs with RECORD_TYPE or UNION_TYPE DECL_CONTEXT.

	PR target/79645
	* common.opt (fdiagnostics-show-labels,
	fdiagnostics-show-line-numbers, fdiagnostics-format=,
	fdiagnostics-minimum-margin-width=, fgnat-encodings=, gas-loc-support,
	gas-locview-support, ginline-points, ginternal-reset-location-views):
	Terminate description text with a dot.
	* config/microblaze/microblaze.opt (mxl-prefetch): Likewise.
	* config/mcore/mcore.opt (m210, m340): Likewise.
	* config/epiphany/epiphany.opt (mprefer-short-insn-regs, mcmove,
	mnops=): Start description text with a capital letter.
	* config/arc/arc.opt (msize-level=): Likewise.
	* config/sh/sh.opt (minline-ic_invalidate): Likewise.
	* config/rs6000/sysv4.opt (mno-toc, mtoc, mno-traceback, mshlib,
	mnewlib): Likewise.
	* config/ft32/ft32.opt (msim): Likewise.
	(mft32b, mcompress): Likewise.  Terminate description text with a dot.
	(mnodiv, mnopm): Terminate description text with a dot.
	* config/c6x/c6x.opt (c6x_sdata): Terminate Enum description with
	a colon.
	* config/i386/i386.opt (prefer_vector_width, instrument_return):
	Likewise.
	* config/rx/rx.opt (nofpu): Remove trailing spaces from description
	text.

	PR rtl-optimization/89634
	* cfgcleanup.c (thread_jump): Punt if registers mentioned in cond1
	are modified in BB_END (e->src) instruction.

2019-03-08  David Malcolm  <dmalcolm@redhat.com>

	PR target/79926
	* config/i386/i386.c (ix86_set_current_function): Make "sorry"
	messages more amenable to translation, and improve wording.

2019-03-08  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000-p8swap.c (rs6000_analyze_swaps): Rebuild
	ud- and du-chains between phases.

2019-03-08  Richard Sandiford  <richard.sandiford@arm.com>

	PR debug/89631
	* dwarf2cfi.c (dwarf2out_frame_debug_expr): Use CONST_POLY_INT
	instead of POLY_INT_CST.

2019-03-08  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	* config/arm/arm.h (TARGET_FP16_TO_DOUBLE): Add TARGET_VFP_DOUBLE
	requirement.

2019-03-08  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/68924
	PR target/78782
	PR target/87558
	* config/i386/emmintrin.h (_mm_loadu_si64): New intrinsic.
	(_mm_storeu_si64): Ditto.

2019-03-08  Martin Liska  <mliska@suse.cz>

	PR target/86952
	* config/i386/i386.c (ix86_option_override_internal): Disable
	jump tables when retpolines are used.

2019-03-08  Jan Hubicka  <hubicka@ucw.cz>

	PR go/63560
	* ipa-split.c (execute_split_functions): Do not split
	'noinline' or 'section' function.

2019-03-08  Jakub Jelinek  <jakub@redhat.com>

	PR target/79846
	* config/s390/s390.c (s390_const_operand_ok): Use %wu instead of
	HOST_WIDE_INT_PRINT_UNSIGNED and %wd instead of
	HOST_WIDE_INT_PRINT_DEC.  Formatting fixes.

	PR ipa/80000
	* ipa-devirt.c (compare_virtual_tables): Remove two trailing spaces
	from diagnostics.  Formatting fixes.

	PR target/85665
	* ipa-devirt.c (odr_types_equivalent_p): Fix grammar in
	warn_odr diagnostics.

	PR other/80058
	* lra-constraints.c (process_alt_operands): Avoid one space before
	" at the end of line and another after " on another line in a string
	literal.
	* attribs.c (handle_dll_attribute): Likewise.
	* config/avr/avr-devices.c (avr_texinfo): Likewise.

	* gimple-ssa-warn-alloca.c (pass_walloca::execute): Don't wrap
	warning_at or inform messages in G_() if there is no ?:.

	PR tree-optimization/89550
	* builtins.c (c_strlen): Only set TREE_NO_WARNING if warning_at
	returned true.  Formatting fixes.
	(expand_builtin_strnlen): Formatting fixes.
	* tree-vrp.c (vrp_prop::check_mem_ref): Only set TREE_NO_WARNING
	if warning_at returned true.
	* tree-cfg.c (pass_warn_function_return::execute): Likewise.

2019-03-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/89578
	* cfgloop.h (struct loop): Add owned_clique field.
	* cfgloopmanip.c (copy_loop_info): Copy it.
	* tree-cfg.c (gimple_duplicate_bb): Do not remap owned_clique
	cliques.
	* tree-inline.c (copy_loops): Remap owned_clique.
	* lto-streamer-in.c (input_cfg): Stream owned_clique.
	* lto-streamer-out.c (output_cfg): Likewise.

2019-03-08  Jakub Jelinek  <jakub@redhat.com>

	PR target/80190
	* config/darwin.c: Include intl.h.
	(darwin_build_constant_cfstring): Improve i18n of diagnostics by not
	composing the message out of two separate parts.

2019-03-07  Jakub Jelinek  <jakub@redhat.com>

	PR target/80003
	* config/i386/i386.c (ix86_set_func_type): Make sure diagnostics
	doesn't start with a capital letter and doesn't end with a dot.
	(ix86_function_arg_boundary): Make sure diagnostics doesn't start
	with a capital letter.
	(ix86_mangle_function_version_assembler_name): Likewise.
	(ix86_generate_version_dispatcher_body): Likewise.
	(fold_builtin_cpu): Likewise.
	(get_builtin_code_for_version): Likewise.  Remove extraneous space.
	(ix86_handle_interrupt_attribute): Make the diagnostics easier for
	translators, wrap full type name in %qs.

	PR translation/79999
	* gimplify.c (gimplify_omp_ordered): Reword diagnostics to talk about
	depend clause with source (or sink) modifier.
	* omp-expand.c (expand_omp_ordered_sink): Likewise.

	PR target/89602
	* config/i386/sse.md (avx512f_mov<ssescalarmodelower>_mask,
	*avx512f_load<mode>_mask, avx512f_store<mode>_mask): New define_insns.
	(avx512f_load<mode>_mask): New define_expand.
	* config/i386/i386-builtin.def (__builtin_ia32_loadsd_mask,
	__builtin_ia32_loadss_mask, __builtin_ia32_storesd_mask,
	__builtin_ia32_storess_mask, __builtin_ia32_movesd_mask,
	__builtin_ia32_movess_mask): New builtins.
	* config/i386/avx512fintrin.h (_mm_mask_load_ss, _mm_maskz_load_ss,
	_mm_mask_load_sd, _mm_maskz_load_sd, _mm_mask_move_ss,
	_mm_maskz_move_ss, _mm_mask_move_sd, _mm_maskz_move_sd,
	_mm_mask_store_ss, _mm_mask_store_sd): New intrinsics.

2019-03-07  Martin Jambor  <mjambor@suse.cz>

	PR lto/87525
	* ipa-cp.c (perform_estimation_of_a_value): Account zero time benefit
	for extern inline functions.

2019-03-07  Martin Jambor  <mjambor@suse.cz>

	PR ipa/88235
	* cgraph.h (cgraph_node): New inline method former_thunk_p.
	* cgraph.c (cgraph_node::dump): Dump a note if node is a former thunk.
	(clone_of_p): Treat expanded thunks like thunks, be optimistic if they
	have multiple callees.  At the end check if declarations match as
	opposed to cgraph_nodes.

2019-03-07  Martin Liska  <mliska@suse.cz>

	* cgraph.c (cgraph_node::verify_node): Verify with a neighbour
	which is equivalent to searching for this in clones chain.
	* symtab.c (symtab_node::verify_base): Similarly compare ASM
	names with a neighbour and special case first node in a chain.

2019-01-25  Jason Merrill  <jason@redhat.com>

	PR c++/80916 - spurious "static but not defined" warning.
	* gimple-fold.c (can_refer_decl_in_current_unit_p): Return false
	for an internal symbol with DECL_EXTERNAL.

2019-04-07  Richard Biener  <rguenther@suse.de>

	PR middle-end/89618
	* cfgloopmanip.c (copy_loop_info): Copy forgotten fields.
	* tree-inline.c (copy_loops): Simplify.

2019-03-07  Martin Liska  <mliska@suse.cz>

	* dwarf2out.c (add_AT_vms_delta): Revert function removal.

2019-03-07  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89595
	* tree-ssa-dom.c (dom_opt_dom_walker::optimize_stmt): Take
	stmt iterator as reference, take boolean output parameter to
	indicate whether the stmt was removed and thus the iterator
	already advanced.
	(dom_opt_dom_walker::before_dom_children): Re-iterate over
	stmts created by folding.

2019-03-07  Jakub Jelinek  <jakub@redhat.com>

	PR c++/89585
	* doc/extend.texi (Basic Asm): Document qualifiers are not allowed
	at toplevel.

2019-03-06  Peter Bergner  <bergner@linux.ibm.com>

	PR rtl-optimization/88845
	* config/rs6000/rs6000.c (rs6000_emit_move_si_sf_subreg): Enable during
	LRA.
	* lra.c (remove_scratches_1): New function.
	(remove_scratches): Use it.
	(lra_emit_move): Likewise.

2019-03-06  Claudiu Zissulescu  <claziss@synopsys.com>

	* config/arc/arc-c.def (__ARC_UNALIGNED__): Set it on
	unaligned_access variable.
	* config/arc/arc.c (arc_override_options): Set unaligned access
	default on for HS CPUs.
	* config/arc/arc.h (STRICT_ALIGNMENT): Fix logic.

2019-03-06  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/89577
	* doc/gcov.texi: Prefer to use --coverage.
	* doc/sourcebuild.texi: Likewise.

2019-03-02  Jason Merrill  <jason@redhat.com>

	PR c++/86485 - -Wmaybe-unused with empty class ?:
	* gimplify.c (gimplify_cond_expr): Use INIT_EXPR.

2019-03-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/89587
	* config/rs6000/t-linux (MULTIARCH_DIRNAME): Set to non-empty only
	if_multiarch.

	PR middle-end/89590
	* builtins.c (maybe_emit_free_warning): Punt if free doesn't have
	exactly one argument.

2019-03-05  Jakub Jelinek  <jakub@redhat.com>
	    Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/89570
	* match.pd (vec_cond into cond_op simplification): Don't use
	get_conditional_internal_fn, use as_internal_fn (cond_op).

2019-03-05  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/89222
	* config/arm/arm.md (movsi): Use targetm.cannot_force_const_mem
	to decide when to split off a non-zero offset from a symbol.
	* config/arm/arm.c (arm_cannot_force_const_mem): Disallow offsets
	in function symbols.

2019-03-05  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89594
	* tree-if-conv.c (pass_if_conversion::execute): Handle
	case where .LOOP_VECTORIZED_FUNCTION was removed.

2019-03-05  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/89560
	* fold-const.c (fold_checksum_tree): Don't use fixed size buffer,
	instead alloca it only when needed with the needed size.

	PR tree-optimization/89570
	* match.pd (vec_cond into cond_op simplification): Guard with
	vectorized_internal_fn_supported_p test and #if GIMPLE.

	PR tree-optimization/89566
	* gimple-ssa-sprintf.c (sprintf_dom_walker::handle_gimple_call):
	Set info.fncode to BUILT_IN_NONE if gimple_call_builtin_p failed.
	Punt if get_user_idx_format succeeds, but idx_format argument is
	not provided or doesn't have pointer type, or if idx_args is above
	number of provided arguments.

2019-03-04  Wilco Dijkstra  <wdijkstr@arm.com>

	PR tree-optimization/89437
	* match.pd: Use lt in sin(atan(x)) and cos(atan(x)) simplifications.

2019-03-04  Richard Biener  <rguenther@suse.de>

	PR middle-end/89572
	* tree-scalar-evolution.c: (get_loop_exit_condition): Use
	safe_dyn_cast.

2019-03-04  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/89487
	* tree-loop-distribution.c (has_nonaddressable_dataref_p): New.
	(create_rdg_vertices): Compute has_nonaddressable_dataref_p.
	(distribute_loop): Don't do runtime alias check if there is non-
	addressable data reference.
	* tree-ssa-loop-ivopts.c (may_be_nonaddressable_p): Check if VAR_DECL
	is a register variable.

2019-03-02  Jakub Jelinek  <jakub@redhat.com>

	PR target/89506
	* config/arm/arm.md (cmpsi2_addneg): Use
	trunc_int_for_mode (-INTVAL (...), SImode) instead of -INTVAL (...).
	If operands[2] is 0 or INT_MIN, force use of subs.
	(*compare_scc splitter): Use gen_int_mode.
	(*negscc): Likewise.
	* config/arm/thumb2.md (*thumb2_negscc): Likewise.

2019-03-01  Kito Cheng  <kito.cheng@gmail.com>
	    Monk Chiang  <sh.chiang04@gmail.com>

	* common/config/riscv/riscv-common.c: Include sstream.
	(riscv_subset_list::to_string): New.
	(riscv_arch_str): Likewise.
	* config.gcc (riscv*-*-*): Handle --with-riscv-attribute=
	* config.in: Regen.
	* config/riscv/riscv-protos.h (riscv_arch_str): New.
	* config/riscv/riscv.c (INCLUDE_STRING): Defined.
	(riscv_emit_attribute): New.
	(riscv_file_start): Emit attribute if needed.
	(riscv_option_override): Init riscv_emit_attribute_p.
	* config/riscv/riscv.opt (mriscv-attribute): New option.
	* configure.ac (riscv*-*-*): Check binutils is supporting ELF
	* configure: Regen.
	* doc/install.texi: Document --with-riscv-attribute.
	* doc/invoke.texi: Document -mriscv-attribute.

	* common/config/riscv/riscv-common.c:
	Include config/riscv/riscv-protos.h.
	(INCLUDE_STRING): Defined.
	(RISCV_DONT_CARE_VERSION): Defined.
	(riscv_subset_t): Declare.
	(riscv_subset_t::riscv_subset_t): New.
	(riscv_subset_list): Declare.
	(riscv_subset_list::riscv_subset_list): New.
	(riscv_subset_list::~riscv_subset_list): Likewise.
	(riscv_subset_list::parsing_subset_version): Likewise.
	(riscv_subset_list::parse_std_ext): Likewise.
	(riscv_subset_list::parse_sv_or_non_std_ext): Likewise.
	(riscv_subset_list::add): Likewise.
	(riscv_subset_list::lookup): Likewise.
	(riscv_subset_list::xlen): Likewise.
	(riscv_subset_list::parse): Likewise.
	(riscv_supported_std_ext): Likewise.
	(current_subset_list): Likewise.
	(riscv_parse_arch_string): Using riscv_subset_list::parse to
	parse.

2019-03-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* config/rs6000/rs6000.c (rs6000_option_override_internal): If
	rs6000_dejagnu_cpu_index is set, use that to override rs6000_cpu_index.
	* config/rs6000/rs6000.opt (mdejagnu-cpu=): New option.

2019-03-01  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/85899
	* haifa-sched.c (find_fallthru_edge_from): Relax assert to account for
	fallthru edges leading to the exit block.

2019-03-01  Tamar Christina  <tamar.christina@arm.com>

	PR target/89517
	* config/aarch64/aarch64-option-extensions.def (fp, simd, crypto, fp16,
	rdma, dotprod, sha2, sha3, sm4, fp16fml, sve): Collapse line.

2019-03-01  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/89535
	* tree-vect-stmts.c (vectorizable_call): Record the vector types
	for each operand.  Calculate the fallback choice for mask operands
	and pass it to vect_get_vec_def_for_operand.

2019-03-01  Richard Biener  <rguenther@suse.de>

	PR middle-end/89541
	* tree-ssa-operands.c (add_stmt_operand): CONST_DECL may
	get virtual operands.
	(get_expr_operands): Handle CONST_DECL like other decls.

2019-03-01  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89503
	* fold-const.c (fold_checksum_tree): Ignore TREE_NO_WARNING bit
	on DECL_P and EXPR_P.

2019-03-01  Richard Biener  <rguenther@suse.de>

	PR middle-end/89497
	* tree-cfgcleanup.h (cleanup_tree_cfg): Add SSA update flags
	argument, defaulted to zero.
	* passes.c (execute_function_todo): Pass down SSA update flags
	to cleanup_tree_cfg.
	* tree-cfgcleanup.c: Include tree-into-ssa.h and tree-cfgcleanup.h.
	(cleanup_tree_cfg_noloop): After cleanup_control_flow_pre update SSA
	form if requested.
	(cleanup_tree_cfg): Get and pass down SSA update flags.

2019-03-01  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/89539
	* dwarf2out.c (output_comdat_type_unit): Add ATTRIBUTE_UNUSED to
	early_lto_debug argument.

2019-02-28  Eric Botcazou  <ebotcazou@adacore.com>

	PR tree-optimization/89536
	* tree-ssa-dom.c (edge_info::derive_equivalences) <BIT_NOT_EXPR>: Test
	only whether bit #0 of the value is 0 instead of the entire value.

2019-02-28  Marek Polacek  <polacek@redhat.com>

	PR c++/87068 - missing diagnostic with fallthrough statement.
	* gimplify.c (expand_FALLTHROUGH_r): If IFN_FALLTHROUGH was found
	at the end of a seq, save its location to walk_stmt_info.
	(expand_FALLTHROUGH): Warn if IFN_FALLTHROUGH is at the end of
	a switch.

2019-02-28  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/88585
	* tree.c (find_atomic_core_type): Move ahead in file.
	(check_base_type): Correctly compare alignments of atomic types.

2019-02-28  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89455
	* config/i386/i386.c (get_builtin_code_for_version): Identify
	Westmere from PCLMUL, instead of AES.

2019-02-28  Jakub Jelinek  <jakub@redhat.com>

	PR target/89434
	* config/arm/arm.md (*subsi3_carryin_compare_const): Use
	trunc_int_for_mode (-INTVAL (...), SImode), just instead of
	-UINTVAL (...).

2019-02-28  Tamar Christina  <tamar.christina@arm.com>

	PR target/88530
	* config/aarch64/aarch64-option-extensions.def: Document it.
	* config/aarch64/driver-aarch64.c (host_detect_local_cpu): Skip feature
	if empty hwcaps.

2019-02-28  Jakub Jelinek  <jakub@redhat.com>

	PR c/89520
	* convert.c (convert_to_real_1, convert_to_integer_1): Punt for
	builtins if they don't have a single scalar floating point argument.
	Formatting fixes.

2019-02-27  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR rtl-optimization/89490
	* varasm.c (get_block_for_section): Bail out for mergeable sections.
	(default_use_anchors_for_symbol_p, output_object_block): Assert the
	block section is not mergeable.

2019-02-27  Jakub Jelinek  <jakub@redhat.com>

	PR target/70341
	* config/arm/arm.md (arm_casesi_internal): New define_expand.  Rename
	old define_insn to ...
	(*arm_casesi_internal): ... this.  Add mode to LABEL_REFs.
	* config/arm/thumb2.md (thumb2_casesi_internal): New define_expand.
	Rename old define_insn to ...
	(*thumb2_casesi_internal): ... this.  Add mode to LABEL_REFs.
	(thumb2_casesi_internal_pic): New define_expand.  Rename old
	define_insn to ...
	(*thumb2_casesi_internal_pic): ... this.  Add mode to LABEL_REFs.
	* config/aarch64/aarch64.md (casesi): Create the casesi_dispatch
	MEM manually here, set MEM_READONLY_P and MEM_NOTRAP_P on it.

2019-02-27  Richard Biener  <rguenther@suse.de>

	PR debug/88878
	* dwarf2out.c (use_debug_types): Disable when in_lto_p.

2019-02-27  Richard Biener  <rguenther@suse.de>

	* passes.c (should_skip_pass_p): Do not skip cgraph-edge
	building.

2019-02-27  Richard Biener  <rguenther@suse.de>

	PR debug/88878
	* dwarf2out.c (output_comdat_type_unit): Add early_lto_debug
	parameter, prefix section name with .gnu.debuglto_ if true.
	(dwarf2out_finish): Pass false to output_comdat_type_unit.
	(dwarf2out_early_finish): Pass true to output_comdat_type_unit.

2019-02-27  Richard Biener  <rguenther@suse.de>

	PR debug/89514
	* dwarf2out.c (size_of_die): Key on AT_ref (a)->comdat_type_p
	rather than on use_debug_types, doing what output_die does.
	(value_format): Likewise.

2019-02-27  Martin Jambor  <mjambor@suse.cz>
	    Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (Warning Options): Reword description of
	-Wno-absolute-value.

2019-02-27  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89280
	* tree-cfgcleanup.c (maybe_dead_abnormal_edge_p,
	builtin_setjmp_setup_bb): New functions.
	(cleanup_control_flow_pre): Ignore maybe_dead_abnormal_edge_p edges.
	When visiting __builtin_setjmp_setup block, queue in special
	setjmp_vec vector edges from .ABNORMAL_DISPATCHER to corresponding
	__builtin_setjmp_receiver.  Remove .ABNORMAL_DISPATCHER basic blocks
	from visited after the loop if they don't have any visited successor
	blocks.

2018-02-26  Steve Ellcey  <sellcey@marvell.com>

	* config/aarch64/aarch64.c (aarch64_get_multilib_abi_name):
	New function.
	(TARGET_GET_MULTILIB_ABI_NAME): New macro.

2019-02-26  Jakub Jelinek  <jakub@redhat.com>

	PR c++/89507
	* tree.c (valid_constant_size_p): Deal with size INTEGER_CSTs
	with types other than sizetype/ssizetype.

2019-02-26  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/sparc-opts.h (enum processor_type): Rename to...
	(enum sparc_processor_type): ...this.
	(enum sparc_code_model_type): New enumeration type.
	(enum sparc_memory_model_type): Tweak comments.
	* config/sparc/sparc.opt (mcpu): Adjust to above renaming.
	(mtune): Likewise.
	(mcmodel): Use sparc_code_model enumeration and variable.
	(sparc_code_model): New enumeration.
	(mdebug): Add Undocumented marker.
	* config/sparc/sparc.h (enum cmodel): Delete.
	(sparc_cmodel): Likewise.
	(TARGET_CM_MEDLOW): Adjust to above renaming.
	(TARGET_CM_MEDMID): Likewise.
	(TARGET_CM_MEDANY): Likewise.
	(TARGET_CM_EMBMEDANY): Likewise.
	* config/sparc/sparc.c (sparc_cmodel): Delete.
	(sparc_option_override): Remove string/value mapping support for the
	code model.  Move code and memory model support to after the handling
	of target flags.  Do private machine setup last.
	(sparc_emit_set_symbolic_const64): Use sparc_code_model.
	(sparc_legitimize_reload_address): Likewise.
	(sparc_output_mi_thunk): Likewise.
	* config/sparc/sparc.md (cpu): Adjust comment to above renaming.

2019-02-26  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89500
	* tree-ssa-strlen.c (stridx_strlenloc): Adjust comment.
	(handle_builtin_strlen): Remove noncst_bound variable.  Always
	optimize strnlen (x, 0) to 0.  Optimize strnlen (x, cst) to
	cst if the first cst bytes starting at x are known to be non-zero,
	even if the string is not zero terminated.  Don't try to modify
	*si for strnlen.  Update strlen_to_stridx only for strlen or if
	we can prove strnlen returns the same value as strlen would.

2019-02-26  Martin Liska  <mliska@suse.cz>

	* alloc-pool.h (struct pool_usage): Remove extra
	print_dash_line.
	* bitmap.h (struct bitmap_usage): Likewise.
	* ggc-common.c (struct ggc_usage): Likewise.
	* mem-stats.h (struct mem_usage): Likewise.
	(mem_alloc_description::dump): Print dash lines
	here and repeat header at the end of a table report.
	It's then more readable.
	* tree-phinodes.c (phinodes_print_statistics): Make
	horizontal alignment.
	* tree-ssanames.c (ssanames_print_statistics): Likewise.
	* vec.c (struct vec_usage): Remove extra print_dash_line.
	* vec.h (vec_safe_grow_cleared): Pass PASS_MEM_STAT.

2019-02-26  Uroš Bizjak  <ubizjak@gmail.com>

	* doc/extend.texi (__builtin_object_size):
	Use @pxref instead of @xref inside parenthesis.
	(__builtin_has_attribute): Add missing comma after @xref.
	(__builtin_object_size): Ditto.
	* doc/md.texi (cond_*{mode}): Use @samp instead of @var around op1[i].

2019-02-26  Jeff Law  <law@redhat.com>

	PR rtl-optimization/87761
	* regcprop.c (copyprop_hardreg_forward_1): Use REG_UNUSED notes to
	detect obviously dead insns and delete them.

2019-02-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89505
	* tree-ssa-structalias.c (compute_dependence_clique): Make sure
	to handle restrict pointed-to vars with multiple subvars
	correctly.

2019-02-26  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89489
	* tree-parloops.c (create_loop_fn): Copy over last_clique.

2019-02-26  Eric Botcazou  <ebotcazou@adacore.com>

	* tree-ssa-dom.c (edge_info::derive_equivalences) <BIT_IOR_EXPR>: Fix
	and move around comment.
	<BIT_AND_EXPR>: Likewise.
	<BIT_NOT_EXPR>: Add specific handling for boolean types.

2019-02-26  Jakub Jelinek  <jakub@redhat.com>

	PR target/89474
	* config/i386/i386.c (remove_partial_avx_dependency): Call
	df_analyze etc. before creation of the v4sf_const0 pseudo, rather than
	after changing possibly many instructions to use that pseudo.  Fix up
	insertion of v4sf_const0 setter at the start of bb.

2019-02-25  Sandra Loosemore  <sandra@codesourcery.com>

	PR c/80409
	* doc/extend.texi (Variadic Pointer Args): New section.

2019-02-25  Sandra Loosemore  <sandra@codesourcery.com>
	    Martin Sebor  <msebor@gmail.com>

	* common.opt (Wattribute-alias): Likewise.
	* doc/invoke.texi (Option Summary): List general form of
	-Wattribute-alias=.  List positive form of -Wmissing-attributes.
	(-Wmissing-attributes): Invert entry, rewrite and correct default.
	Add cross-references.
	(-Wattribute-alias): Rewrite and correct default.  Mention
	considered attributes (same as for -Wmissing-attributes).

2019-02-25  Paul A. Clarke  <pc@us.ibm.com>

	* config/rs6000/emmintrin.h (_mm_cvtpd_epi32): Fix big endian.
	(_mm_cvtpd_ps): Likewise.
	(_mm_cvttpd_epi32): Likewise.

	PR target/89338
	* config/rs6000/xmmintrin.h (_mm_cvtss_f32): Fix type mismatch.
	(_mm_cvt_ss2si): Fix type mismatch and 32-bit.

	PR target/89339
	* config/rs6000/xmmintrin.h (_mm_movemask_pi8): Fix 32-bit.

2019-02-25  Tamar Christina  <tamar.christina@arm.com>

	PR target/88530
	* common/config/aarch64/aarch64-common.c
	(struct aarch64_option_extension): Add is_synthetic.
	(all_extensions): Use it.
	(TARGET_OPTION_INIT_STRUCT): Define hook.
	(struct gcc_targetm_common): Moved to end.
	(all_extensions_by_on): New.
	(opt_ext_cmp, typedef opt_ext): New.
	(aarch64_option_init_struct): New.
	(aarch64_contains_opt): New.
	(aarch64_get_extension_string_for_isa_flags): Output smallest set.
	* config/aarch64/aarch64-option-extensions.def
	(AARCH64_OPT_EXTENSION): Explicitly include AES and SHA2 in crypto.
	(fp, simd, crc, lse, fp16, rcpc, rdma, dotprod, aes, sha2, sha3,
	sm4, fp16fml, sve, profile, rng, memtag, sb, ssbs, predres):
	Set is_synthetic to false.
	(crypto): Set is_synthetic to true.
	* config/aarch64/driver-aarch64.c (AARCH64_OPT_EXTENSION): Add
	SYNTHETIC.

2019-02-25  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/arm_neon.h (vfmlal_low_u32, vfmlsl_low_u32,
	vfmlal_high_u32, vfmlsl_high_u32, vfmlalq_low_u32, vfmlslq_low_u32,
	vfmlalq_high_u32, vfmlslq_high_u32, vfmlal_lane_low_u32,
	vfmlal_lane_high_u32, vfmlalq_laneq_low_u32, vfmlalq_lane_low_u32,
	vfmlal_laneq_low_u32, vfmlalq_laneq_high_u32, vfmlalq_lane_high_u32,
	vfmlal_laneq_high_u32, vfmlsl_lane_low_u32, vfmlsl_lane_high_u32,
	vfmlslq_laneq_low_u32, vfmlslq_lane_low_u32, vfmlsl_laneq_low_u32,
	vfmlslq_laneq_high_u32, vfmlslq_lane_high_u32, vfmlsl_laneq_high_u32):
	Rename ...
	(vfmlal_low_f16, vfmlsl_low_f16, vfmlal_high_f16, vfmlsl_high_f16,
	vfmlalq_low_f16, vfmlslq_low_f16, vfmlalq_high_f16, vfmlslq_high_f16,
	vfmlal_lane_low_f16, vfmlal_lane_high_f16, vfmlalq_laneq_low_f16,
	vfmlalq_lane_low_f16, vfmlal_laneq_low_f16, vfmlalq_laneq_high_f16,
	vfmlalq_lane_high_f16, vfmlal_laneq_high_f16, vfmlsl_lane_low_f16,
	vfmlsl_lane_high_f16, vfmlslq_laneq_low_f16, vfmlslq_lane_low_f16,
	vfmlsl_laneq_low_f16, vfmlslq_laneq_high_f16, vfmlslq_lane_high_f16,
	vfmlsl_laneq_high_f16): ... To this.
	* config/arm/neon.md: Update comments.

2019-02-25  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/arm_neon.h (vfmlal_low_u32, vfmlsl_low_u32,
	vfmlalq_low_u32, vfmlslq_low_u32, vfmlal_high_u32, vfmlsl_high_u32,
	vfmlalq_high_u32, vfmlslq_high_u32, vfmlal_lane_low_u32,
	vfmlsl_lane_low_u32, vfmlal_laneq_low_u32, vfmlsl_laneq_low_u32,
	vfmlalq_lane_low_u32, vfmlslq_lane_low_u32, vfmlalq_laneq_low_u32,
	vfmlslq_laneq_low_u32, vfmlal_lane_high_u32, vfmlsl_lane_high_u32,
	vfmlal_laneq_high_u32, vfmlsl_laneq_high_u32, vfmlalq_lane_high_u32,
	vfmlslq_lane_high_u32, vfmlalq_laneq_high_u32, vfmlslq_laneq_high_u32):
	Rename ...
	(vfmlal_low_f16, vfmlsl_low_f16, vfmlalq_low_f16, vfmlslq_low_f16,
	vfmlal_high_f16, vfmlsl_high_f16, vfmlalq_high_f16, vfmlslq_high_f16,
	vfmlal_lane_low_f16, vfmlsl_lane_low_f16, vfmlal_laneq_low_f16,
	vfmlsl_laneq_low_f16, vfmlalq_lane_low_f16, vfmlslq_lane_low_f16,
	vfmlalq_laneq_low_f16, vfmlslq_laneq_low_f16, vfmlal_lane_high_f16,
	vfmlsl_lane_high_f16, vfmlal_laneq_high_f16, vfmlsl_laneq_high_f16,
	vfmlalq_lane_high_f16, vfmlslq_lane_high_f16, vfmlalq_laneq_high_f16,
	vfmlslq_laneq_high_f16): ... To this.

2019-02-25  Alexander Monakov  <amonakov@ispras.ru>

	PR rtl-optimization/86096
	* df-scan.c (df_mw_compare): Do not check mw_reg fields when
	comparing mw_order values.

2019-02-25  Jakub Jelinek  <jakub@redhat.com>

	PR target/89434
	* config/arm/arm.md (*subsi3_carryin_const): Use
	arm_neg_immediate_operand predicate instead of
	arm_not_immediate_operand, "L" constraint instead of "K" and
	print it using %n2 instead of %B2.
	(*subsi3_carryin_const0): New define_insn.
	(*subsi3_carryin_compare_const): Use const_int_I_operand predicate
	instead of arm_not_operand and "I" constraint instead of "K" and
	print it using %n3 instead of %B2.  Instead of using match_dup 2 add
	another match_operand and in the condition check that it is negation
	of operands[2].
	(*subsi3_carryin_compare_const0): New define_ins.
	(*subdi_di_zesidi): Adjust to use *subsi3_carryin_const0 instead of
	*subsi3_carryin_const.
	(*arm_cmpdi_insn): Fix splitting into *subsi3_carryin_compare_const,
	split into *subsi3_carryin_compare_const0 if the highpart is zero.

	PR target/89438
	* config/arm.vfp.md (*negdf2_vfp): Use
	gen_int_mode (0x80000000, SImode) instead of GEN_INT (0x80000000).
	* config/arm/neon.md (neon_copysignf<mode>): Likewise.

2019-02-24  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89445
	* simplify-rtx.c (simplify_ternary_operation): Don't use
	simplify_merge_mask on operands that may trap.
	* rtlanal.c (may_trap_p_1): Use FLOAT_MODE_P instead of
	SCALAR_FLOAT_MODE_P checks.  For integral division by zero, if
	second operand is CONST_VECTOR, check if any element could be zero.
	Don't expect traps for VEC_{MERGE,SELECT,CONCAT,DUPLICATE} unless
	their operands can trap.

2019-02-23  Martin Sebor  <msebor@redhat.com>

	* gimple-ssa-sprintf.c (target_strtol): Rename...
	(target_strtohwi): ...to this.  Handle values up to HOST_WIDE_INT_MAX.
	(parse_directive): Adjust to name change.  Use HOST_WIDE_INT_MAX to
	check for range error.

2019-02-23  H.J. Lu  <hongjiu.lu@intel.com>

	PR driver/69471
	* opts-common.c (prune_options): Also prune joined switches
	with Negative and RejectNegative.
	* config/i386/i386.opt (march=): Add Negative(march=).
	(mtune=): Add Negative(mtune=).
	* doc/options.texi: Document Negative used together with Joined
	and RejectNegative.

2019-02-22  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (Other Builtins): Add
	__builtin_is_constant_evaluated.

2019-02-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87609
	* tree-cfg.c (gimple_duplicate_bb): Only remap inlined cliques.

2019-02-22  Jeff Law  <law@redhat.com>

	PR rtl-optimization/87761
	* config/mips/mips.md: Add new combiner pattern to recognize
	a bitfield extraction using (ashiftrt (truncate (ashift (...)))).

2019-02-22  Matthew Malcomson  <matthew.malcomson@arm.com>

	PR target/89324
	* config/aarch64/aarch64.md: Use aarch64_general_reg predicate on
	destination register in peepholes generating patterns for ADDS/SUBS.
	(add<mode>3_compare0,
	*addsi3_compare0_uxtw, add<mode>3_compareC,
	add<mode>3_compareV_imm, add<mode>3_compareV,
	*adds_<optab><ALLX:mode>_<GPI:mode>,
	*subs_<optab><ALLX:mode>_<GPI:mode>,
	*adds_<optab><ALLX:mode>_shift_<GPI:mode>,
	*subs_<optab><ALLX:mode>_shift_<GPI:mode>,
	*adds_<optab><mode>_multp2, *subs_<optab><mode>_multp2,
	*sub<mode>3_compare0, *subsi3_compare0_uxtw,
	sub<mode>3_compare1): Allow stack pointer for source register.
	* config/aarch64/predicates.md (aarch64_general_reg): New predicate.

2019-02-22  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/88993
	PR tree-optimization/88853
	* gimple-ssa-sprintf.c (sprintf_dom_walker::call_info::is_file_func):
	New helper.
	(sprintf_dom_walker::call_info::is_string_func): New helper.
	(format_directive): Only issue "may exceed" 4095/INT_MAX warnings
	for formatted string functions.
	(sprintf_dom_walker::handle_gimple_call): Fix a typo in a comment.

2019-02-22  Martin Sebor  <msebor@redhat.com>

	PR c/89425
	* c-parser.c (sizeof_ptr_memacc_comptypes): Avoid warning in
	unreachable subexpressions.

2019-02-22  H.J. Lu  <hongjiu.lu@intel.com>
	    Hongtao Liu  <hongtao.liu@intel.com>
	    Sunil K Pandey  <sunil.k.pandey@intel.com>

	PR target/87007
	* config/i386/i386-passes.def: Add
	pass_remove_partial_avx_dependency.
	* config/i386/i386-protos.h
	(make_pass_remove_partial_avx_dependency): New.
	* config/i386/i386.c (make_pass_remove_partial_avx_dependency):
	New function.
	(pass_data_remove_partial_avx_dependency): New.
	(pass_remove_partial_avx_dependency): Likewise.
	(make_pass_remove_partial_avx_dependency): Likewise.
	* config/i386/i386.md (avx_partial_xmm_update): New attribute.
	(*extendsfdf2): Add avx_partial_xmm_update.
	(truncdfsf2): Likewise.
	(*float<SWI48:mode><MODEF:mode>2): Likewise.
	(SF/DF conversion splitters): Disabled for TARGET_AVX.

2019-02-22  Aldy Hernandez  <aldyh@redhat.com>

	PR middle-end/85598
	* gimple-ssa-sprintf.c (pass_sprintf_length::execute): Enable loop
	analysis for pass.

2019-02-22  Thiago Macieira  <thiago.macieira@intel.com>

	PR target/89444
	* config/i386/i386.h (PTA_WESTMERE): Remove PTA_AES.
	(PTA_SKYLAKE): Add PTA_AES.
	(PTA_GOLDMONT): Likewise.

2019-02-22  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64.c (aarch64_output_mi_thunk): Add bti
	instruction if enabled.
	(aarch64_override_options): Remove reference to return address key.

2019-02-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89440
	* tree-vect-loop.c (vect_create_epilog_for_reduction): Remove
	not necessary assert.

2019-02-22  Thomas Schwinge  <thomas@codesourcery.com>

	PR fortran/72741
	* omp-general.c (oacc_replace_fn_attrib): Mostly split out into...
	(oacc_replace_fn_attrib_attr): ... this new function.
	* omp-general.h (oacc_replace_fn_attrib_attr): New prototype.
	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): Revert workaround.

2019-02-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/arm-cpus.in (ares): Rename to...
	(neoverse-n1): ... This.  Add ares as alias.
	* config/arm/arm-tables.opt: Regenerate.
	* config/arm/arm-tune.md: Likewise.
	* doc/invoke.txt (ARM Options): Document neoverse-n1.

2019-02-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-cores.def (neoverse-e1): Define.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.texi (AArch64 Options): Document neoverse-e1 -mcpu option.

2019-02-22  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.c (ares_tunings): Rename to...
	(neoversen1_tunings): ... This.
	* config/aarch64/aarch64-cores.def (ares): Change tuning to the above.
	(neoverse-n1): New CPU.
	* config/aarch64/aarch64-tune.md: Regenerate.
	* doc/invoke.txt (AArch64 Options): Document neoverse-n1.

2019-02-22  Richard Biener  <rguenther@suse.de>

	PR middle-end/87609
	* cfghooks.h (dependence_hash): New typedef.
	(struct copy_bb_data): New type.
	(cfg_hooks::duplicate_block): Adjust to take a copy_bb_data argument.
	(duplicate_block): Likewise.
	* cfghooks.c (duplicate_block): Pass down copy_bb_data.
	(copy_bbs): Create and pass down copy_bb_data.
	* cfgrtl.c (cfg_layout_duplicate_bb): Adjust.
	(rtl_duplicate_bb): Likewise.
	* tree-cfg.c (gimple_duplicate_bb): If the copy_bb_data arg is not NULL
	remap dependence info.

2019-02-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/87609
	* tree-core.h (tree_base): Document special clique values.
	* tree-inline.c (remap_dependence_clique): Do not use the
	special clique value of one.
	(maybe_set_dependence_info): Use clique one.
	(clear_dependence_clique): New callback.
	(compute_dependence_clique): Clear clique one from all refs
	before assigning it (again).

2019-02-21  Martin Sebor  <msebor@redhat.com>

	* doc/extend.texi (__clear_cache): Correct signature.

2019-02-21  Ian Lance Taylor  <iant@golang.org>

	PR go/89170
	* varasm.c (decode_addr_const): Call lookup_constant_def rather
	than output_constant_def.
	(add_constant_to_table): New static function.
	(output_constant_def): Call add_constant_to_table.
	(tree_output_constant_def): Likewise.

2019-02-21  Jakub Jelinek  <jakub@redhat.com>

	PR c++/89285
	* builtins.c (fold_builtin_arith_overflow): If first two args are
	INTEGER_CSTs, set intres and ovfres to constants rather than calls
	to ifn.

2019-02-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/87412
	* config/i386/i386.c (ix86_set_indirect_branch_type): Issue an
	error for -mindirect-branch/-mfunction-return with incompatible
	-fcf-protection.

2019-02-21  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/88714
	* constraints.md (q): Remove.
	* config/arm/ldrdstrd.md (*arm_ldrd, *arm_strd): Use rk constraint
	instead of q.

2019-02-21  Martin Jambor  <mjambor@suse.cz>

	PR hsa/89302
	* omp-general.c (omp_extract_for_data): Removed a duplicate call
	to omp_adjust_for_condition, moved NE_EXPR code_cond processing...
	(omp_adjust_for_condition): ...here.  Added necessary parameters.
	* omp-general.h (omp_adjust_for_condition): Updated declaration.
	* omp-grid.c (grid_attempt_target_gridification): Adjust to pass
	proper values to new parameters of omp_adjust_for_condition.

2019-02-20  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89412
	* expr.c (expand_assignment): If result is a MEM, use change_address
	instead of simplify_gen_subreg.

2019-02-20  Jakub Jelinek  <jakub@redhat.com>
	    David Malcolm  <dmalcolm@redhat.com>

	PR middle-end/89091
	* fold-const.c (decode_field_reference): Return NULL_TREE if
	lang_hooks.types.type_for_size returns NULL.  Check it before
	overwriting *exp_.  Use return NULL_TREE instead of return 0.

2019-02-20  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/88074
	PR middle-end/89415
	* toplev.c (do_compile): Double the emin/emax exponents to workaround
	buggy mpc_norm.

2019-02-20  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89397
	* config/i386/i386.c (ix86_atomic_assign_expand_fenv): Check
	TARGET_SSE in addition to TARGET_SSE_MATH.

	(ix86_excess_precision): Ditto.
	(ix86_float_exceptions_rounding_supported_p): Ditto.
	(use_rsqrt_p): Ditto.
	* config/i386/sse.md (rsqrt<mode>2): Ditto.

2019-02-20  David Malcolm  <dmalcolm@redhat.com>

	PR c/89410
	* diagnostic-show-locus.c (layout::calculate_line_spans): Use
	linenum_arith_t when determining if two adjacent line spans are
	close enough to merge.
	(diagnostic_show_locus): Use linenum_arith_t when iterating over
	lines within each line_span.

2019-02-20  Andre Vieira  <andre.simoesdiasvieira@arm.com>

	PR target/86487
	* lra-constraints.c(uses_hard_regs_p): Fix handling of
	paradoxical SUBREGS.

2019-02-20  Li Jia He  <helijia@linux.ibm.com>

	PR target/88100
	* config/rs6000/rs6000.c (rs6000_gimple_fold_builtin)
	<case ALTIVEC_BUILTIN_VSPLTISB, ALTIVEC_BUILTIN_VSPLTISH,
	ALTIVEC_BUILTIN_VSPLTISW>: Don't convert the operand before
	range checking it.

2019-02-19  Jonathan Wakely  <jwakely@redhat.com>

	* config/gcn/gcn.c (print_operand): Fix typo.

2019-02-19  Richard Biener  <rguenther@suse.de>

	PR middle-end/88074
	* toplev.c (do_compile): Initialize mpfr's exponent range
	based on available float modes.

2019-02-19  Eric Botcazou  <ebotcazou@adacore.com>

	* rtlanal.c (get_initial_register_offset): Fall back to the estimate
	as long as the epilogue isn't completed.

2019-02-18  Martin Sebor  <msebor@redhat.com>

	* doc/cpp.texi (Conditional syntax): Add __has_attribute,
	__has_cpp_attribute, and __has_include.

2019-02-18  Martin Sebor  <msebor@redhat.com>

	* doc/invoke.texi (-Wreturn-type): Correct and expand.

2019-02-18  Martin Sebor  <msebor@redhat.com>

	PR middle-end/89294
	* tree.c (valid_constant_size_p): Avoid assuming size is a constant
	expression.
	* tree.h (cst_size_error): Add the cst_size_not_constant enumerator.

2019-02-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89296
	* tree-ssa-loop-ch.c (ch_base::copy_headers): Restrict setting
	of no-warning flag to cases that might emit the bogus warning.

2019-02-18  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/88714
	* config/arm/arm.md (*arm_movdi, *movdf_soft_insn): Use "r" instead of
	"q" constraint.
	* config/arm/vfp.md (*movdi_vfp): Likewise.
	* config/arm/ldrdstrd.md (*arm_ldrd, *arm_strd): Use "r" instead of
	"q" constraint for operands[0].

	PR target/89369
	* config/s390/s390.md (*r<noxa>sbg_<mode>_srl_bitmask,
	*r<noxa>sbg_<mode>_sll, *r<noxa>sbg_<mode>_srl): Don't construct
	pattern in a temporary buffer.
	(*r<noxa>sbg_sidi_srl): Likewise.  Always use 32 as I3 rather
	than 64-operands[2].

	PR target/89361
	* config/s390/s390.c (s390_indirect_branch_attrvalue,
	s390_indirect_branch_settings): Define unconditionally.
	(s390_set_current_function): Likewise, but guard the whole body except
	the s390_indirect_branch_settings call with
	#if S390_USE_TARGET_ATTRIBUTE.
	(TARGET_SET_CURRENT_FUNCTION): Redefine unconditionally.

	* config/s390/s390.md (*<risbg_n>_ior_and_sr_ze,
	*<risbg_n>_<mode>_ior_and_lshiftrt, *<risbg_n>_sidi_ior_and_lshiftrt):
	Use HOST_WIDE_INT_M1U instead of ~(0ULL).
	(*<risbg_n>_and_subregdi_rotr, *<risbg_n>_and_subregdi_rotl): Use
	HOST_WIDE_INT_1U instead of 1ULL.
	(*pre_z10_extzv<mode>, *pre_z10_extv<mode>): Change mask type from int
	to unsigned HOST_WIDE_INT, use HOST_WIDE_INT_1U instead of 1ul.
	(*insv<mode><clobbercc_or_nocc>_appendbitsleft,
	z = (x << c) | (y >> d) splitters): Use HOST_WIDE_INT_1U
	instead of 1UL.
	(*insv<mode>_mem_reg, *insvdi_mem_reghigh): Use HOST_WIDE_INT_1U
	instead of 1ul.

2019-02-18  Martin Jambor  <mjambor@suse.cz>

	PR tree-optimization/89209
	* tree-sra.c (create_access_replacement): New optional parameter
	reg_tree.  Use it as a type if non-NULL and access type is not of
	a register type.
	(get_repl_default_def_ssa_name): New parameter REG_TYPE, pass it
	to create_access_replacement.
	(sra_modify_assign): Pass LHS type to get_repl_default_def_ssa_name.
	Check lacc is non-NULL before attempting to re-create it on the RHS.

2019-02-18  Martin Liska  <mliska@suse.cz>

	PR ipa/89306
	* cgraph.c (symbol_table::create_edge): Set m_summary_id to -1
	by default.
	(symbol_table::free_edge): Recycle m_summary_id.
	* cgraph.h (get_summary_id): New.
	(symbol_table::release_symbol): Set m_summary_id to -1
	by default.
	(symbol_table::allocate_cgraph_symbol): Recycle m_summary_id.
	* ipa-fnsummary.c (ipa_fn_summary_t): Switch from
	function_summary to fast_function_summary.
	* ipa-fnsummary.h (ipa_fn_summary_t): Likewise.
	* ipa-pure-const.c (class funct_state_summary_t):
	Switch from function_summary to fast_function_summary.
	* ipa-reference.c (class ipa_ref_var_info_summary_t): Likewise.
	(class ipa_ref_opt_summary_t): Switch from function_summary
	to fast_function_summary.
	* symbol-summary.h (class function_summary_base): New class
	that is created from base of former function_summary.
	(function_summary_base::unregister_hooks): New.
	(class function_summary): Inherit from function_summary_base.
	(class call_summary_base): New class
	that is created from base of former call_summary.
	(class call_summary): Inherit from call_summary_base.
	(struct is_same): New.
	(class fast_function_summary): New summary class.
	(class fast_call_summary): New summary class.
	* vec.h (vec_safe_grow_cleared): New function.

2019-02-18  Martin Liska  <mliska@suse.cz>

	* config/i386/i386.c (ix86_get_multilib_abi_name): New function.
	(TARGET_GET_MULTILIB_ABI_NAME): New macro defined.
	* doc/tm.texi: Document new target hook.
	* doc/tm.texi.in: Likewise.
	* target.def: Add new target macro.
	* gcc.c (find_fortran_preinclude_file): Do not search multilib
	suffixes.

2019-02-17  Alan Modra  <amodra@gmail.com>

	PR target/89271
	* config/rs6000/rs6000.md (<bd>_<mode> split): Check for an int
	output reg on add insn.
	(<bd>tf_<mode> split): Likewise.  Match predicates with insn.

2019-02-16  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89372
	* config/i386/sse.md (ssedoublemode): Remove V4HI.
	(PMULHRSW): Likewise.
	(<ssse3_avx2>_pmulhrsw<mode>3): Require TARGET_SSSE3, not
	TARGET_AVX2.
	(ssse3_pmulhrswv4hi3): New expander.

2019-02-16  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/mmx.md (*vec_extractv2si_zext_mem): Doesn't require
	MMX.  Add isa attribute.

2019-02-16  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/66152
	* builtins.h (c_readstr): Declare.
	* builtins.c (c_readstr): Remove forward declaration.  Add
	null_terminated_p argument, if false, read all bytes from the
	string instead of stopping after '\0'.
	* expr.c (string_cst_read_str): New function.
	(store_expr): Use string_cst_read_str instead of
	builtin_strncpy_read_str.  Try to store by pieces the whole
	exp_len first, and only if that fails, split it up into
	store by pieces followed by clear_storage.  Formatting fix.

	* config/i386/i386.md (*movqi_internal): Remove static from
	buf variable.  Use output_asm_insn (buf, operands); return "";
	instead of return buf;.
	* config/i386/sse.md (<sse>_andnot<mode>3<mask_name>,
	*<code><mode>3<mask_name>, *andnot<mode>3, *andnottf3, *<code><mode>3,
	*<code>tf3, <mask_codefor><code><mode>3<mask_name>): Likewise.

2019-02-15  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/linux.h (ASAN_CC1_SPEC): Define.
	(CC1_SPEC): Use GNU_USER_TARGET_CC1_SPEC and ASAN_CC1_SPEC.
	* config/sparc/linux64.h (ASAN_CC1_SPEC): Likewise.
	(CC1_SPEC): Likewise.
	* config/sparc/sparc.c (sparc_asan_shadow_offset): Adjust for 64-bit.

2019-02-15  Eric Botcazou  <ebotcazou@adacore.com>

	* asan.c (asan_emit_stack_protection): Use full-sized mask to align
	the base address on 64-bit strict-alignment platforms.

2019-02-15  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/i386.h (VALID_MMX_REG_MODE): Correct the misplaced ')'.

2019-02-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/darwin.h (TARGET_FPMATH_DEFAULT_P): New define.

2019-02-15  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR rtl-optimization/88308
	* shrink-wrap.c (move_insn_for_shrink_wrap): Fix LABEL_NUSES counts
	on copied instruction.

2019-02-15  Eric Botcazou  <ebotcazou@adacore.com>

	* final.c (insn_current_reference_address): Replace test on JUMP_P
	with test on jump_to_label_p.
	* config/visium/visium-passes.def: New file.
	* config/visium/t-visium (PASSES_EXTRA): Define.
	* config/visium/visium-protos.h (make_pass_visium_reorg): Declare.
	* config/visium/visium.h (TRAMPOLINE_SIZE): Adjust.
	(TRAMPOLINE_ALIGNMENT): Define.
	* config/visium/visium.c (visium_option_override): Do not register
	the machine-specific reorg pass here.
	(visium_trampoline_init): Align the BRA insn on a 64-bit boundary
	for the GR6.
	(output_branch): Adjust threshold for long branch instruction.
	* config/visium/visium.md (cpu): Move around.
	(length): Adjust for the GR6.

2019-02-15  Richard Biener  <rguenther@suse.de>
	    Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89278
	* tree-loop-distribution.c: Include tree-eh.h.
	(generate_memset_builtin, generate_memcpy_builtin): Call
	rewrite_to_non_trapping_overflow on builtin->size before passing it
	to force_gimple_operand_gsi.

2019-02-15  Jakub Jelinek  <jakub@redhat.com>

	PR other/89342
	* optc-save-gen.awk: Handle optimize_fast like optimize_size or
	optimize_debug.
	* opth-gen.awk: Likewise.

2019-02-15  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386.h (TARGET_SUBTARGET64_ISA_DEFAULT):
	Enable MMX, SSE and SSE2 by default.
	* config/i386/i386.c (ix86_option_override_internal): Do not
	explicitly set MMX, SSE and SSE2 flags for TARGET_64BIT here.

2019-02-14  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89354
	* combine.c (make_extraction): Punt if extraction_mode is narrower
	than len bits.

2019-02-14  Maya Rashish  <coypu@sdf.org>

	* config.gcc (*-*-netbsd*): Add netbsd-d.o.
	* config/netbsd-d.c: New file.
	* config/t-netbsd: Add netbsd-d.o

2018-02-14  Steve Ellcey  <sellcey@marvell.com>

	* config/aarch64/aarch64.c (aarch64_attribute_table): Change
	affects_type_identity to true for aarch64_vector_pcs.
	(aarch64_comp_type_attributes): New function.
	(TARGET_COMP_TYPE_ATTRIBUTES): New macro.

2019-02-14  Tamar Christina  <tamar.christina@arm.com>

	PR target/88850
	* config/arm/iterators.md (ANY64): Add V4HF.

2019-02-14  Martin Liska  <mliska@suse.cz>

	PR rtl-optimization/89242
	* dce.c (delete_unmarked_insns): Call free_dominance_info we
	process a transformation.

2019-02-14  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89314
	* fold-const.c (fold_binary_loc): Cast strlen argument to
	const char * before dereferencing it.  Formatting fixes.

	PR middle-end/89284
	* passes.def: Swap pass_ubsan and pass_early_warn_uninitialized.

2019-02-13  Ian Lance Taylor  <iant@golang.org>

	* optc-save-gen.awk: Set var_opt_hash for initial optimizations
	and set current index for other optimizations.

2019-02-13  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/sse.md (vec_set<VI4F_256_512:mode>_0): Use
	nonimmediate_operand as operand 2 predicate.
	(vec_set<VF2_512_256:mode>_0): Ditto.
	(vec_set<VI8_AVX_AVX512F:mode>_0): Ditto.
	(*vec_concatv2si): Remove alternative 2.
	(*vec_concatv4si_0): Use vm constraint for alternative 0.
	(*vec_concatv4si_0): Remove preferred_for_speed attribute.
	(vec_concatv2di): Split alternatives 4,5,6 to ...
	(*vec_concatv2di_0) ... new pattern.

2019-02-13  Wilco Dijkstra  <wdijkstr@arm.com>

	PR target/89190
	* config/arm/arm.c (ldm_stm_operation_p) Set
	addr_reg_in_reglist correctly for first register.
	(load_multiple_sequence): Remove dead base check.
	(gen_ldm_seq): Correctly set write_back for Thumb-1.

2019-02-13  Tamar Christina  <tamar.christina@arm.com>

	PR target/88847
	* config/aarch64/aarch64-sve.md (*pred_mov<mode>, pred_mov<mode>):
	Expose as @aarch64_pred_mov.
	* config/aarch64/aarch64.c (aarch64_classify_address):
	Use expand_insn which legitimizes operands.

2019-02-13  Martin Liska  <mliska@suse.cz>

	* builtins.h (expand_builtin_with_bounds): Remove declaration.
	* calls.c (struct arg_data): Remove special_slot, pointer_arg
	and pointer_offset fields.
	(initialize_argument_information): Remove usage of dead
	fields.
	* cgraph.h (struct cgraph_thunk_info): Remove
	add_pointer_bounds_args.
	* cgraphunit.c (cgraph_node::expand_thunk): Remove usage of dead
	fields.
	(cgraph_node::assemble_thunks_and_aliases): Remove usage of dead
	fields.
	* config/i386/i386.c (ix86_function_arg_advance): Remove
	unrelated comment.
	(struct builtin_isa): Remove leaf_p and nothrow_p fields.
	(def_builtin): Remove usage of dead fields.
	(ix86_add_new_builtins): Likewise.
	* ipa-fnsummary.c (compute_fn_summary): Likewise.
	* ipa-icf.c (sem_function::equals_wpa): Likewise.
	(sem_function::init): Likewise.
	(sem_variable::merge): Likewise.
	* ipa-visibility.c (function_and_variable_visibility): Likewise.
	* ipa.c (symbol_table::remove_unreachable_nodes): Likewise.
	* lto-cgraph.c (lto_output_node): Likewise.
	(lto_output_varpool_node): Likewise.
	(input_node): Likewise.
	(input_varpool_node): Likewise.
	* lto-streamer-out.c (lto_output): Likewise.
	* tree-inline.c (expand_call_inline): Remove usage of
	assign_stmts.
	* tree-inline.h (struct copy_body_data): Likewise.
	* varpool.c (varpool_node::dump): Likewise.

2019-02-13  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89303
	* tree-ssa-structalias.c (set_uids_in_ptset): Or in vi->is_heap_var
	into pt->vars_contains_escaped_heap instead of setting
	pt->vars_contains_escaped_heap to it.

	PR middle-end/89281
	* optabs.c (prepare_cmp_insn): Use UINTVAL (size) instead of
	INTVAL (size), compare it to GET_MODE_MASK instead of
	1 << GET_MODE_BITSIZE.

	PR target/89290
	* config/i386/predicates.md (x86_64_immediate_operand): Allow
	TLS UNSPECs offsetted by signed 32-bit CONST_INT even with
	-mcmodel=large.

2019-02-13  Martin Liska  <mliska@suse.cz>

	PR lto/88858
	* cfgrtl.c (remove_barriers_from_footer): New function.
	(try_redirect_by_replacing_jump): Use it.
	(cfg_layout_redirect_edge_and_branch): Likewise.

2019-02-13  Xiong Hu Luo  <luoxhu@linux.vnet.ibm.com>

	* config/rs6000/altivec.h (vec_sbox_be, vec_cipher_be,
	vec_cipherlast_be, vec_ncipher_be, vec_ncipherlast_be): New #defines.
	* config/rs6000/crypto.md (CR_vqdi): New define_mode_iterator.
	(crypto_vsbox_<mode>, crypto_<CR_insn>_<mode>): New define_insns.
	* config/rs6000/rs6000-builtin.def (VSBOX_BE): New BU_CRYPTO_1.
	(VCIPHER_BE, VCIPHERLAST_BE, VNCIPHER_BE, VNCIPHERLAST_BE):
	New BU_CRYPTO_2.
	* config/rs6000/rs6000.c (builtin_function_type)
	<CRYPTO_BUILTIN_VSBOX_BE, CRYPTO_BUILTIN_VCIPHER_BE,
	CRYPTO_BUILTIN_VCIPHERLAST_BE, CRYPTO_BUILTIN_VNCIPHER_BE,
	CRYPTO_BUILTIN_VNCIPHERLAST_BE>: New switch options.
	* doc/extend.texi (vec_sbox_be, vec_cipher_be, vec_cipherlast_be,
	vec_ncipher_be, vec_ncipherlast_be): New builtin functions.

2019-02-12  Pat Haugen  <pthaugen@us.ibm.com>

	* doc/invoke.texi (RS/6000 and PowerPC Options): Remove duplicate
	-maltivec. Delete -maltivec=be and -maltivec=le documentation.

2019-02-12  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89229
	* config/i386/i386.md (*movoi_internal_avx): Revert revision
	268678 and revision 268657.
	(*movti_internal): Likewise.

2019-02-12  Ilya Leoshkevich  <iii@linux.ibm.com>

	PR target/89233
	* config/s390/s390.c (s390_decompose_address): Update comment.
	(s390_check_qrst_address): Reject invalid address forms after
	LRA.

2019-02-12  Martin Liska  <mliska@suse.cz>

	PR lto/88876
	* ipa-pure-const.c (propagate_pure_const): Revert hunk as
	we need default values of funct_state for a function that
	is not optimized.

2019-02-12  Eric Botcazou  <ebotcazou@adacore.com>

	* asan.c (asan_expand_mark_ifn): Take into account the alignment of
	the object to pick the size of stores on strict-alignment platforms.

	* config/sparc/sparc.md (*movsi_insn): Minor tweak.
	(*movdi_insn_sp32): Likewise.
	(*movdi_insn_sp64): Likewise.

2019-02-12  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/88677
	* cgraphunit.c (analyze_functions): Clear READONLY flag for external
	types that needs constructiong.
	* tree.h (may_be_aliased): Do not check TYPE_NEEDS_CONSTRUCTING.

2019-02-12  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89253
	* tree-ssa-loop-split.c (tree_ssa_split_loops): Check we can
	duplicate the loop.

2019-02-11  David Malcolm  <dmalcolm@redhat.com>

	PR lto/88147
	* input.c (selftest::test_line_offset_overflow): New selftest.
	(selftest::input_c_tests): Call it.

2019-02-11  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/88771
	* gimple-ssa-warn-restrict.c (pass_wrestrict::gate): Also enable
	when -Wstringop-overflow is set.
	(builtin_memref::builtin_memref): Adjust excessive upper bound
	only when lower bound is not excessive.
	(maybe_diag_overlap): Detect and diagnose excessive bounds via
	-Wstringop-ovefflow.
	(maybe_diag_offset_bounds): Rename...
	(maybe_diag_access_bounds): ...to this.
	(check_bounds_or_overlap): Adjust for name change above.

2019-02-11  Martin Sebor  <msebor@redhat.com>

	PR c++/87996
	* builtins.c (max_object_size): Move from here...
	* builtins.h (max_object_size): ...and here...
	* tree.c (max_object_size): ...to here...
	* tree.h (max_object_size): ...and here.

2019-02-11  Bill Schmidt  <wschmidt@linux.ibm.com>

	* config/rs6000/rs6000.c (rs6000_gimple_fold_builtin): Shift-right
	and shift-left vector built-ins need to include a TRUNC_MOD_EXPR
	for correct semantics.

2019-02-11  Alan Modra  <amodra@gmail.com>

	* doc/invoke.texi (man page RS/6000 and PowerPC Options): Mention
	-mlongcall and -mpltseq.
	(RS/6000 and PowerPC Options <-mlongcall>): Mention inline PLT calls.
	(RS/6000 and PowerPC Options <-mpltseq>): Document.
	* config/rs6000/rs6000.h (TARGET_PLTSEQ): Define.
	* config/rs6000/sysv4.opt (mpltseq): New option.
	* config/rs6000/sysv4.h (TARGET_PLTSEQ): Redefine.
	(SUBTARGET_OVERRIDE_OPTIONS): Error if given -mpltseq when assembler
	support is lacking.  Don't allow -mpltseq with -mbss-plt.
	* config/rs6000/linux64.h (SUBSUBTARGET_OVERRIDE_OPTIONS): Warn if
	-mpltseq given for ELFv1.
	* config/rs6000/rs6000.c (rs6000_call_aix): Comment on UNSPEC_PLTSEQ.
	Only use UNSPEC_PLTSEQ for inline PLT calls.
	(rs6000_call_sysv, rs6000_sibcall_sysv): Expand comments.  Only
	use UNSPEC_PLTSEQ for inline PLT calls.
	(rs6000_indirect_call_template_1, rs6000_longcall_ref),
	(rs6000_call_aix, rs6000_call_sysv, rs6000_sibcall_sysv): Replace
	uses of HAVE_AS_PLTSEQ with TARGET_PLTSEQ, simplifying.
	* config/rs6000/rs6000.md (pltseq_tocsave_<mode>),
	(pltseq_plt16_ha_<mode>, pltseq_plt16_lo_<mode>),
	(pltseq_mtctr_<mode>): Likewise.

2019-02-11  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* acinclude.m4 (gcc_AC_INITFINI_ARRAY): Use 8-byte strings with
	Solaris ld.
	* configure: Regenerate.

2019-02-11  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/88714
	* config/arm/ldrdstrd.md (*arm_ldrd, *arm_strd): Use q constraint
	instead of r.

2019-02-11  Hans-Peter Nilsson  <hp@axis.com>

	* function.c (assign_parm_setup_block): Use the stored
	size, not the passed size, when allocating stack-space,
	also for a parameter with alignment larger than
	MAX_SUPPORTED_STACK_ALIGNMENT.

2019-02-11  Martin Liska  <mliska@suse.cz>

	PR ipa/89009
	* ipa-cp.c (build_toporder_info): Remove usage of a param.
	* ipa-inline.c (inline_small_functions): Likewise.
	* ipa-pure-const.c (propagate_pure_const): Likewise.
	(propagate_nothrow): Likewise.
	* ipa-reference.c (propagate): Likewise.
	* ipa-utils.c (struct searchc_env): Remove unused field.
	(searchc): Always search across AVAIL_INTERPOSABLE.
	(ipa_reduced_postorder): Always allow AVAIL_INTERPOSABLE as
	the only called IPA pure const can properly not propagate
	across interposable boundary.
	* ipa-utils.h (ipa_reduced_postorder): Remove param.

2019-02-11  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.md (call_internal, call_value_internal,
	sibcall_internal, sibcall_value_internal): Use SImode for mem rtx.

2019-02-11  Hans-Peter Nilsson  <hp@axis.com>

	* config/cris/cris.c (cris_preferred_minimum_alignment): Fix name
	typo.

2019-02-10  H.J. Lu  <hongjiu.lu@intel.com>

	* config/i386/constraints.md (Yd): Replace AVX512BW with AVX512DQ
	in comments

2019-02-10  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (with_nds32_lib): Set default --with-nds32-lib correctly.

2019-02-10  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89268
	* tree-if-conv.c (version_loop_for_if_conversion): Push to preds only
	if preds is non-NULL.

2019-02-09  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/89272
	* tree.c (fld_simplified_type_name): Also keep TYPE_DECL for
	polymorphic types.

2019-02-10  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/nds32.md (trap): New pattern.

2019-02-10  Monk Chiang  <sh.chiang04@gmail.com>

	* config/nds32/nds32.c (nds32_dwarf_register_span): Refine register
	dwarf span.

2019-02-10  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32-md-auxiliary.c (nds32_spilt_doubleword): Support
	to split POST_INC.

2019-02-09  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-visibility.c (localize_node): Also do not localize
	LDPR_PREVAILING_DEF_IRONLY_EXP.

2019-02-09  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/87957
	* tree.c (fld_simplified_type_name): Use DECL_ASSEMBLER_NAME_SET_P
	instead of type_with_linkage.

2019-02-09  Jan Hubicka  <hubicka@ucw.cz>

	PR ipa/88755
	* params.def (uninlined-function-insns, uninlined-function-time,
	uninlined-thunk-insns, uninlined-thunk-time): Add artificial upper
	bound so we don't get overflows.

2019-02-09  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000-string.c (expand_compare_loop,
	expand_block_compare): Insert REG_BR_PROB notes in inline expansion of
	memcmp/strncmp.

2019-02-09  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89246
	* config/i386/i386.c (ix86_simd_clone_compute_vecsize_and_simdlen):
	If !node->definition and TYPE_ARG_TYPES is non-NULL, use
	TYPE_ARG_TYPES instead of DECL_ARGUMENTS.

2019-02-09  Alan Modra  <amodra@gmail.com>

	PR target/88343
	* config/rs6000/rs6000.c (save_reg_p): Correct calls_eh_return
	case.  Match logic in rs6000_emit_prologue emitting pic_offset_table
	setup.

2019-02-08  Vladimir Makarov  <vmakarov@redhat.com>

	PR middle-end/88560
	* lra-constraints.c (process_alt_operands): Don't increase reject
	for memory when offset memory is required.

2019-02-08  Robin Dapp  <rdapp@linux.ibm.com>

	* config/s390/vector.md: Implement vector copysign.

2019-02-08  H.J. Lu  <hongjiu.lu@intel.com>

	* expr.c (expand_constructor): Correct indentations.

2019-02-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89247
	* tree-if-conv.c: Include tree-cfgcleanup.h.
	(version_loop_for_if_conversion): Record LOOP_VECTORIZED call.
	(tree_if_conversion): Pass through predicate vector.
	(pass_if_conversion::execute): Do CFG cleanup and SSA update
	inline, see if any if-converted loops we refrece in
	LOOP_VECTORIZED calls vanished and fixup.
	* tree-if-conv.h (tree_if_conversion): Adjust prototype.

2019-02-08  Ilya Leoshkevich  <iii@linux.ibm.com>

	* config/s390/constraints.md (jdd): New constraint.

2019-02-08  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89229
	* config/i386/i386.md (*movoi_internal_avx): Set mode to XI for
	upper 16 vector registers without TARGET_AVX512VL.
	(*movti_internal): Likewise.

2019-02-08  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/89234
	* except.c (copy_reg_eh_region_note_forward): Return if note_or_insn
	is a NOTE, CODE_LABEL etc. - rtx_insn * other than INSN_P.
	(copy_reg_eh_region_note_backward): Likewise.

2019-02-08  Richard Biener  <rguenther@suse.de>

	PR middle-end/89223
	* tree-data-ref.c (initialize_matrix_A): Fail if constant
	doesn't fit in HWI.
	(analyze_subscript_affine_affine): Handle failure from
	initialize_matrix_A.

2019-02-08  Jakub Jelinek  <jakub@redhat.com>

	* cfganal.c (pre_and_rev_post_order_compute_fn): Use fn instead of
	cfun everywhere.

2019-02-07  David Malcolm  <dmalcolm@redhat.com>

	PR tree-optimization/86637
	PR tree-optimization/89235
	* tree-vect-loop.c (optimize_mask_stores): Add an
	auto_purge_vect_location sentinel to ensure that vect_location is
	purged on exit.
	* tree-vectorizer.c
	(auto_purge_vect_location::~auto_purge_vect_location): New dtor.
	(try_vectorize_loop_1): Add an auto_purge_vect_location sentinel
	to ensure that vect_location is purged on exit.
	(pass_slp_vectorize::execute): Likewise, replacing the manual
	reset.
	* tree-vectorizer.h (class auto_purge_vect_location): New class.

2019-02-07  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/iterators.md (max_opp): New code_attr.
	(USMAX): New code iterator.
	* config/aarch64/predicates.md (aarch64_smin): New predicate.
	(aarch64_smax): Likewise.
	* config/aarch64/aarch64-simd.md (abd<mode>_3): Rename to...
	(*aarch64_<su>abd<mode>_3): ... Change RTL representation to
	MINUS (MAX MIN).

2019-02-07  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/89229
	* config/i386/i386.md (*movoi_internal_avx): Set mode to OI
	for TARGET_AVX512VL.
	(*movti_internal): Set mode to TI for TARGET_AVX512VL.

2019-02-07  Andreas Krebbel  <krebbel@linux.ibm.com>

	* config/s390/s390-builtin-types.def: Add new types.
	* config/s390/s390-builtins.def: (s390_vec_xl, s390_vec_xld2)
	(s390_vec_xlw4): Make the memory operand into a const pointer.
	(s390_vec_xld2, s390_vec_xlw4): Add a variant for single precision
	float.
	* config/s390/s390-c.c (s390_expand_overloaded_builtin): Generate
	a new vector type with the alignment of the scalar memory operand.

2019-02-07  Matthew Malcomson  <matthew.malcomson@arm.com>
	    Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/88714
	* config/arm/arm-protos.h (valid_operands_ldrd_strd,
	arm_count_ldrdstrd_insns): New declarations.
	* config/arm/arm.c (mem_ok_for_ldrd_strd): Remove broken handling of
	MINUS.
	(valid_operands_ldrd_strd): New function.
	(arm_count_ldrdstrd_insns): New function.
	* config/arm/ldrdstrd.md: Change peepholes to generate PARALLEL SImode
	sets instead of single DImode set and define new insns to match this.

2019-02-07  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64-builtins.c (aarch64_fcmla_lane_builtin_data):
	Make it a C initializer.

2019-02-07  Tamar Christina  <tamar.christina@arm.com>

	PR/target 88850
	* config/arm/neon.md (*neon_mov<mode>): Add r -> r case.

2019-02-07  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/arm/neon.md (neon_<sup>dot<vsi2qi>):
	Use neon_dot<q> for type.
	(neon_<sup>dot_lane<vsi2qi>): Likewise.

2019-02-07  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64-simd.md (aarch64_<sur>dot<vsi2qi>):
	Use neon_dot<q> for type.
	(aarch64_<sur>dot_lane<vsi2qi>): Likewise.
	(aarch64_<sur>dot_laneq<vsi2qi>): Likewise.

2019-02-06  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/89225
	* lra-constaints.c (simplify_operand_subreg): Add subreg mode
	sizes check.

2019-02-06  Eric Botcazou  <ebotcazou@adacore.com>

	* config/i386/i386.c (ix86_expand_prologue): Emit a memory blockage
	after restoring registers saved to allocate the frame on Windows.

2019-02-06  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89182
	* graphite.h (cached_scalar_evolution_in_region): Declare.
	* graphite.c (struct seir_cache_key): New.
	(struct sese_scev_hash): Likewise.
	(seir_cache): New global.
	(cached_scalar_evolution_in_region): New function.
	(graphite_transform_loops): Allocate and release seir_cache.
	* graphite-isl-ast-to-gimple.c (get_rename_from_scev): Use
	cached_scalar_evolution_in_region.
	* graphite-scop-detection.c (scop_detection::can_represent_loop):
	Simplify.
	(scop_detection::graphite_can_represent_expr: Use
	cached_scalar_evolution_in_region.
	(scop_detection::stmt_simple_for_scop_p): Likewise.
	(find_params_in_bb): Likewise.
	(gather_bbs::before_dom_children): Likewise.
	* graphite-sese-to-poly.c (create_pw_aff_from_tree): Likewise.
	(add_loop_constraints): Likewise.

2019-02-06  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89210
	* fold-const-call.c (fold_const_vec_convert): Pass true as last
	operand to new_unary_operation only if both element types are integral
	and it isn't a widening conversion.  Return NULL_TREE if
	new_unary_operation failed.

2019-02-05  Andreas Krebbel  <krebbel@linux.ibm.com>

	PR target/88856
	* config/s390/s390.md: Remove load and test FP splitter.

2019-02-05  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/89112
	* config/rs6000/rs6000-string.c (do_ifelse, expand_cmp_vec_sequence,
	expand_compare_loop, expand_block_compare_gpr,
	expand_strncmp_align_check, expand_strncmp_gpr_sequence): Insert
	REG_BR_PROB notes in inline expansion of memcmp/strncmp. Add
	#include "profile-count.h" and "predict.h" for types and functions
	needed to work with REG_BR_PROB notes.

2019-02-05  Aaron Sawdey  <acsawdey@linux.ibm.com>

	PR target/89112
	* config/rs6000/rs6000.md (<bd>tf_<mode>): Generate a local label
	for the long branch case.

2019-02-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/89188
	* dce.c (delete_unmarked_insns): Don't remove no-op moves if they
	can throw, non-call exceptions are enabled and we can't delete
	dead exceptions or alter cfg.  Set must_clean if
	delete_insn_and_edges returns true, don't set it blindly for calls.
	Assert that delete_unreachable_blocks is called only if can_alter_cfg.

	PR rtl-optimization/89195
	* combine.c (make_extraction): For MEMs, don't extract bytes outside
	of the original MEM.

2019-02-05  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/89000
	* gcov.c (function_summary): Remove argument.
	(file_summary): New function.
	(print_usage): Replace tabs with spaces.
	(generate_results): Use new function file_summary.

2019-02-05  Jakub Jelinek  <jakub@redhat.com>

	PR target/89186
	* optabs.c (prepare_cmp_insn): Pass x and y to
	emit_block_comp_via_libcall rather than XEXP (x, 0) and XEXP (y, 0).

2019-02-05  Richard Biener  <rguenther@suse.de>

	PR middle-end/89150
	* bitmap.h (struct bitmap_obstack): Do not mark GTY.
	(struct bitmap_element): Drop chain_prev so we properly recurse on
	the prev member, supporting tree views.
	(struct bitmap_head): GTY skip the obstack member.

2019-02-04  Alexander Monakov  <amonakov@ispras.ru>

	PR c/88698
	* doc/extend.texi (Vector Extensions): Add an example of using vector
	types together with x86 intrinsics.

2019-02-04  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_indirect_call_template_1): Increase
	str[] size to 160, and comment.

2019-02-04  Alan Modra  <amodra@gmail.com>

	* config/rs6000/rs6000.c (rs6000_indirect_call_template_1),
	(rs6000_pltseq_template): Guard output of TLS markers with
	TARGET_TLS_MARKERS.
	(rs6000_longcall_ref, rs6000_call_aix, rs6000_call_sysv),
	(rs6000_sibcall_sysv): Ignore TARGET_TLS_MARKERS when deciding
	to use inline PLT sequences.
	* config/rs6000/rs6000.md (pltseq_tocsave_<mode>),
	(pltseq_plt16_ha_<mode>, pltseq_plt16_lo_<mode>),
	(pltseq_mtctr_<mode>): Don't test TARGET_TLS_MARKERS in predicate.

2019-02-04  Martin Liska  <mliska@suse.cz>

	PR ipa/88985
	* ipa-fnsummary.c (estimate_edge_devirt_benefit): Bail
	out when ipa_fn_summaries does not contain entry for callee.

2019-02-04  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/sparc.h: Remove superfluous blank lines.
	* config/sparc/sparc.c (global_offset_table_rtx): Rename into...
	(got_register_rtx): ...this.
	(sparc_got): Adjust to above renaming.
	(sparc_tls_got): Likewise.
	(sparc_delegitimize_address): Likewise.
	(sparc_output_mi_thunk): Likewise.
	(sparc_init_pic_reg): Likewise.
	(save_local_or_in_reg_p): Fix test on the GOT register.
	(USE_HIDDEN_LINKONCE): Move around.
	(get_pc_thunk_name): Likewise.
	(gen_load_pcrel_sym): Likewise.
	(load_got_register): Likewise.

2019-02-04  Kito Cheng  <kito.cheng@gmail.com>

	* config/nds32/linux.h (GLIBC_DYNAMIC_LINKER): Define the naming rule
	of the dynamic linker: "ld-linux-nds32[le|be][f].so.1".

2019-02-04  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config/nds32/nds32.c (nds32_legitimate_address_p): Add TLS model
	into consideration.

2019-02-04  Chung-Ju Wu  <jasonwucj@gmail.com>

	* config.gcc (with_nds32_lib, glibc):
	Remove TARGET_DEFAULT_TLSDESC_TRAMPOLINE=0 setting.
	* config/nds32/linux.h (TARGET_DEFAULT_TLSDESC_TRAMPOLINE): Delete.
	(NDS32_TLSDESC_TRAMPOLINE_SPEC): Delete.

2019-02-03  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89071
	* config/i386/i386.md (*sqrt<mode>2_sse): Add (v,0) alternative.
	Do not prefer (v,v) alternative for non-AVX targets and (m,v)
	alternative for speed when TARGET_SSE_PARTIAL_REG_DEPENDENCY is set.
	(*rcpsf2_sse): Ditto.
	(*rsqrtsf2_sse): Ditto.
	(sse4_1_round<mode<2): Ditto.

2019-02-03  Richard Biener  <rguenther@suse.de>

	PR debug/87295
	* dwarf2out.c (copy_ancestor_tree): Register non-stubs as
	orig.

2019-02-02  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/87887
	* config/i386/i386.c (ix86_simd_clone_compute_vecsize_and_simdlen):
	Punt with warning on aggregate return or argument types.  Ignore
	type/mode checking for uniform arguments.

2019-02-01  Segher Boessenkool  <segher@kernel.crashing.org>

	* combine.c (try_combine): Do not print "Can't combine" messages unless
	printing failed combination attempts.

2019-02-01  Martin Jambor  <mjambor@suse.cz>

	PR hsa/87863
	* omp-grid.c (grid_mark_variable_segment): Set assembler name of group
	segment and global segment variables before making them static.

2019-02-01  Martin Jambor  <mjambor@suse.cz>

	* omp-grid.c (grid_target_follows_gridifiable_pattern): Guard two
	missed optimization dump with dump_enabled_p.

2019-02-01  Richard Biener  <rguenther@suse.de>

	PR middle-end/88597
	* tree-scalar-evolution.c (analyze_scalar_evolution): Set up
	the instantiate cache.
	(instantiate_scev_binary): Elide second operand procesing
	if equal to the first.
	* tree-chrec.c (chrec_contains_symbols): Add visited set.
	(chrec_contains_undetermined): Likewise.
	(tree_contains_chrecs): Likewise.

2019-02-01  Jan Hubicka  <hubicka@ucw.cz>

	* parms.def (MAX_INLINE_INSNS_SINGLE): Reduce from 400 to 200.

2019-02-01  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/89143
	* wide-int-range.h (wide_int_range_absu): Declare.
	* wide-int-range.cc (wide_int_range_absu): New function.
	* tree-vrp.c (extract_range_from_unary_expr): Handle ABSU_EXPR.

	PR tree-optimization/88107
	* tree-cfg.c (find_outermost_region_in_block): Add ALL argument,
	instead of assertion that eh_region_outermost is non-NULL, if it
	is NULL, set *ALL to true and return NULL.
	(move_sese_region_to_fn): Adjust caller, if all is set, call
	duplicate_eh_regions with NULL region.

2019-02-01  Richard Biener  <rguenth@suse.de>

	PR rtl-optimization/88593
	* mode-switching.c (optimize_mode_switching): Free dominators before
	calling cleanup_cfg.

2019-02-01  Bin Cheng  <bin.cheng@linux.alibaba.com>

	PR tree-optimization/88932
	* tree-predcom.c (try_combine_chains): Get loop bbs in dom order.

2019-01-31  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89137
	* omp-low.c (lower_omp_task_reductions): Drop redundant test to avoid
	bogus clang warning.

2019-01-31  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/89071
	* config/i386/i386.md (*extendsfdf2): Split out reg->reg
	alternative to avoid partial SSE register stall for TARGET_AVX.
	(truncdfsf2): Ditto.
	(sse4_1_round<mode>2): Ditto.

2018-01-31  Bill Schmidt  <wschmidt@linux.ibm.com>

	PR tree-optimization/89008
	* gimple-ssa-strength-reduction.c (slsr_process_mul): Don't
	process anything of the form X * 0.

2019-01-31  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89135
	* tree-ssa-phiprop.c (pass_phiprop::execute): Skip blocks
	with abnormal preds.

2019-01-31  Jakub Jelinek  <jakub@redhat.com>

	PR sanitizer/89124
	* ipa-inline.c (sanitize_attrs_match_for_inline_p): Allow inlining
	always_inline callees into no_sanitize_address callers.

2019-01-31  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/89115
	* lra.c (lra_rtx_hash): Properly hash CONST_INT values.

2019-01-30  Martin Sebor  <msebor@redhat.com>

	PR other/89106
	* doc/extend.texi (cast to a union): Correct and expand.

2019-01-30  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/87246
	* lra-constraints.c (simplify_operand_subreg): Reload memory
	in subreg if the address became invalid.

2019-01-30  Bill Schmidt  <wschmidt@linux.ibm.com>

	PR target/87064
	* config/rs6000/vsx.md (*vsx_reduc_<VEC_reduc_name>_v4sf_scalar):
	Disable for little-endian.

2019-01-30  Richard Biener  <rguenther@suse.de>

	PR rtl-optimization/89115
	* opts.c (default_options_optimization): Reduce
	PARAM_MAX_DSE_ACTIVE_LOCAL_STORES by a factor of 10 at -O1.
	Make PARAM_LOOP_INVARIANT_MAX_BBS_IN_LOOP reduction relative
	to the default.

2019-01-30  Kelvin Nilsen  <kelvin@gcc.gnu.org>

	* config/rs6000/rs6000-c.c (altivec-resolve_overloaded_builtin):
	Change handling of ALTIVEC_BUILTIN_VEC_EXTRACT.  Coerce result to
	type of vector element when vec_extract is implemented by direct
	move.

2019-01-30  Thomas Schwinge  <thomas@codesourcery.com>

	* doc/invoke.texi (C Language Options): List "-fopenacc-dim".

2019-01-30  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89111
	* tree-ssa-loop-im.c (gather_mem_refs_stmt): Restrict
	canonicalization to appropriately sized access types.

2019-01-30  Jakub Jelinek  <jakub@redhat.com>

	PR c++/89105
	* config/i386/i386.c (ix86_warn_parameter_passing_abi): Don't warn
	for arguments to functions that are TU-local and shouldn't be
	referenced by assembly.

2019-01-30  Ulrich Drepper  <drepper@redhat.com>

	* dumpfile.c (opt_info_switch_p_1): Ignore '-' if it appears
	after '='.

2019-01-29  Martin Sebor  <msebor@redhat.com>

	PR c/88956
	* gimple-fold.c (fold_array_ctor_reference): Avoid zero-length arrays.

2019-01-29  Jakub Jelinek  <jakub@redhat.com>

	PR c++/66676
	PR ipa/89104
	* omp-simd-clone.c (simd_clone_clauses_extract)
	<case OMP_CLAUSE_ALIGNED>: Ignore clauses with NULL
	OMP_CLAUSE_ALIGNED_ALIGNMENT.

2019-01-29  Vineet Gupta  <vgupta@synopsys.com>

	* config.gcc: Force .init_array for ARC.

2019-01-29  Richard Biener  <rguenther@suse.de>

	PR debug/87295
	* dwarf2out.c (collect_skeleton_dies): New helper.
	(copy_decls_for_unworthy_types): Call it.
	(build_abbrev_table): Assert we do not try to replace
	DW_AT_signature refs with local refs.

2019-01-28  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/89002
	* gimplify.c (gimplify_omp_for): When adding OMP_CLAUSE_*_GIMPLE_SEQ
	for lastprivate/linear IV, push gimplify context around gimplify_assign
	and, if it needed any temporaries, pop it into a gimple bind around the
	sequence.

2019-01-28  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* common.opt (-Wattribute-alias): Remove "no-" from name.
	Make -Wattribute-alias command line option and
	#pragma GCC diagnostic ignored "-Wattribute-alias" work again.

2019-01-28  Jakub Jelinek  <jakub@redhat.com>

	PR target/89073
	* doc/invoke.texi (-mclwb, -mprfchw, -mrdpid, -mrdseed, -msgx,
	-madx, -mhle, -mavx5124fmaps, -mavx512vnni, -mavx5124vnniw): Document
	x86 ISA options.
	(bmi2): Add missing @opindex.
	* doc/extend.texi (x86 target attribute): Move fma4, lwp, ssse3
	options alphabetically.  Add missing 3dnow, 3dnowa, adx, avx, avx2,
	avx5124fmaps, avx5124vnniw, avx512bitalg, avx512bw, avx512cd,
	avx512dq, avx512er, avx512f, avx512ifma, avx512pf, avx512vbmi,
	avx512vbmi2, avx512vl, avx512vnni, avx512vpopcntdq, bmi, bmi2,
	cldemote, clflushopt, clwb, clzero, crc32, cx16, f16c, fma, fsgsbase,
	fxsr, gfni, hle, lzcnt, movbe, movdir64b, movdiri, mwaitx, pconfig,
	pku, prefetchwt1, prfchw, ptwrite, rdpid, rdrnd, rdseed, rtm, sahf,
	sgx, sha, shstk, tbm, vaes, vpclmulqdq, waitpkg, wbnoinvd, xsave,
	xsavec, xsaveopt and xsaves options.

2019-01-28  Richard Biener  <rguenther@suse.de>

	PR debug/89076
	* dwarf2out.c (gen_subprogram_die): Remove leftover from MPX
	support removal.

2019-01-28  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88739
	* tree-cfg.c (verify_types_in_gimple_reference): Verify
	BIT_FIELD_REFs only are applied to mode-precision operands
	when they are integral.
	(verify_gimple_assign_ternary): Likewise for BIT_INSERT_EXPR.
	* tree-ssa-sccvn.c (vn_reference_lookup_3): Avoid generating
	BIT_FIELD_REFs of non-mode-precision integral operands.

2019-01-27  Jakub Jelinek  <jakub@redhat.com>

	PR target/87214
	* config/i386/sse.md
	(<mask_codefor>avx512dq_shuf_<shuffletype>64x2_1<mask_name>,
	avx512f_shuf_<shuffletype>64x2_1<mask_name>): Ensure the
	first constants in pairs are multiples of 2.  Formatting fixes.
	(avx512vl_shuf_<shuffletype>32x4_1<mask_name>,
	avx512vl_shuf_<shuffletype>32x4_1<mask_name>): Ensure the
	first constants in each quadruple are multiples of 4.  Formatting fixes.

2019-01-26  Martin Jambor  <mjambor@suse.cz>

	PR ipa/88933
	* tree-inline.c: Include tree-cfgcleanup.h.
	(delete_unreachable_blocks_update_callgraph): Move...
	* tree-cfgcleanup.c (delete_unreachable_blocks_update_callgraph):
	...here, make externally visible, make second argument bool, adjust
	all callers.
	* tree-cfgcleanup.c: Include cgraph.h.
	* tree-cfgcleanup.h (delete_unreachable_blocks_update_callgraph):
	Declare.
	* ipa-prop.c: Include tree-cfgcleanup.h.
	(ipcp_transform_function): Call
	delete_unreachable_blocks_update_callgraph instead of cleaning uo CFG.

2019-01-25  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/88846
	* ira.c (process_set_for_memref_referenced_p): New.
	(memref_referenced_p): Add new param.  Use
	process_set_for_memref_referenced_p.  Add new switch cases.
	(memref_used_between_p): Pass new arg to memref_referenced_p.

2019-01-25  Richard Earnshaw  <rearnsha@arm.com>

	PR target/88469
	* config/aarch64/aarch64.c (aarch64_function_arg_alignment): Add new
	argument ABI_BREAK.  Set to true if the calculated alignment has
	changed in gcc-9.  Check bit-fields for their base type alignment.
	(aarch64_layout_arg): Warn if argument passing has changed in gcc-9.
	(aarch64_function_arg_boundary): Likewise.
	(aarch64_gimplify_va_arg_expr): Likewise.

2019-01-25  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/89037
	* varasm.c (output_constructor_bitfield): Use wi::extract_uhwi
	instead of accessing TREE_INT_CST_ELT directly.

2019-01-25  Christophe Lyon  <christophe.lyon@linaro.org>

	* doc/sourcebuild.texi (Environment attributes): Add fenv and
	fenv_exceptions description.

2019-01-25  Wilco Dijkstra  <wdijkstr@arm.com>

	PR rtl-optimization/87763
	* config/aarch64/aarch64.c (aarch64_select_cc_mode):
	Allow SUBREG when matching CC_NZmode compare.

2019-01-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89049
	* tree-vect-loop.c (vect_compute_single_scalar_iteration_cost):
	Look at the pattern stmt to determine if the stmt is vectorized.

2019-01-25  Richard Sandiford  <richard.sandiford@arm.com>

	* config/aarch64/aarch64-sve.md (*pred_mov<mode>)
	(pred_mov<mode>): Handle all-register forms using both a new
	alternative and a split.

2019-01-25  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86865
	* graphite-scop-detection.c (scop_detection::can_represent_loop):
	Reject non-do-while loops.

2019-01-24  Peter Bergner  <bergner@linux.ibm.com>

	* config/rs6000/altivec.md (build_vector_mask_for_load): Use MEM_P.
	* config/rs6000/constraints.md (Q constraint): Use REG_P.
	* config/rs6000/darwin.h (PREFERRED_RELOAD_CLASS): Use SYMBOL_REF_P.
	* config/rs6000/freebsd64.h (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P): Use
	SYMBOL_REF_P, CONST_INT_P and CONST_DOUBLE_P.
	* config/rs6000/linux64.h (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P): Likewise.
	* config/rs6000/predicates.md (altivec_register_operand, vint_operand,
	vsx_register_operand, vsx_reg_sfsubreg_ok, vfloat_operand,
	vlogical_operand, gpc_reg_operand, int_reg_operand,
	int_reg_operand_not_pseudo): Use SUBREG_P and HARD_REGISTER_P.
	(ca_operand, base_reg_operand, htm_spr_reg_operand, cc_reg_operand,
	cc_reg_not_cr0_operand, input_operand): Use SUBREG_P.
	(save_world_operation, restore_world_operation, lmw_operation,
	stmw_operation): Use MEM_P and REG_P.
	(tie_operand): Use MEM_P.
	(vrsave_operation, crsave_operation): Use REG_P.
	(mfcr_operation, mtcrf_operation): Use REG_P and CONST_INT_P.
	(fpr_reg_operand): Use SUBREG_P and HARD_REGISTER_NUM_P.
	(quad_int_reg_operand): Use HARD_REGISTER_NUM_P.
	(call_operand): Use HARD_REGISTER_P.
	(indexed_or_indirect_operand, altivec_indexed_or_indirect_operand):
	Use CONST_INT_P.
	(lwa_operand): Use SUBREG_P, REG_P and CONST_INT_P.
	* config/rs6000/rs6000-p8swap.c (insn_is_load_p, insn_is_store_p,
	quad_aligned_load_p, replace_swapped_aligned_store,
	recombine_lvx_pattern, replace_swapped_aligned_load,
	recombine_stvx_pattern): Use MEM_P.
	(const_load_sequence_p, adjust_vperm, replace_swapped_load_constant):
	Use MEM_P and SYMBOL_REF_P.
	(rtx_is_swappable_p): Use REG_P and CONST_INT_P.
	(insn_is_swappable_p): Use REG_P and MEM_P.
	(insn_is_swap_p, (alignment_mask): Use CONST_INT_P.
	* config/rs6000/rs6000-string.c (expand_block_clear, expand_block_move):
	Use CONST_INT_P.
	* config/rs6000/rs6000.c (rs6000_secondary_reload, rs6000_emit_cmove):
	Use CONST_DOUBLE_P.
	(rs6000_output_move_128bit): Use CONST_DOUBLE_P, CONST_INT_P and
	CONST_WIDE_INT_P.
	(rs6000_legitimize_address): Use CONST_DOUBLE_P, CONST_INT_P,
	CONST_WIDE_INT_P, REG_P and SYMBOL_REF_P.
	(rs6000_emit_move): Use CONST_DOUBLE_P, CONST_INT_P, HARD_REGISTER_P,
	HARD_REGISTER_NUM_P, MEM_P, REG_P, SUBREG_P, SYMBOL_REF_P and
	reg_or_subregno:
	(output_toc): Use CONST_DOUBLE_P, CONST_INT_P and SYMBOL_REF_P.
	(easy_altivec_constant, rs6000_legitimate_offset_address_p,
	rs6000_mode_dependent_address, rs6000_expand_mtfsf_builtin,
	rs6000_expand_set_fpscr_rn_builtin, rs6000_expand_set_fpscr_drn_builtin,
	rs6000_expand_unop_builtin, INT_P, rs6000_generate_compare,
	rs6000_machopic_legitimize_pic_address, rs6000_split_logical_inner,
	rs6000_split_logical_di): Use CONST_INT_P.
	(rs6000_legitimize_reload_address): Use CONST_INT_P, HARD_REGISTER_P,
	REG_P and SYMBOL_REF_P.
	(setup_incoming_varargs, rs6000_rtx_costs): Use CONST_INT_P and MEM_P.
	(print_operand): Use CONST_INT_P, MEM_P and REG_P.
	(virtual_stack_registers_memory_p, rs6000_legitimate_address_p,
	mems_ok_for_quad_peep): Use CONST_INT_P and REG_P.
	(rs6000_secondary_reload_memory): Use CONST_INT_P and SUBREG_P.
	(small_data_operand, print_operand_address): Use CONST_INT_P and
	SYMBOL_REF_P.
	(split_stack_arg_pointer_used_p): Use HARD_REGISTER_P.
	(rs6000_init_hard_regno_mode_ok, direct_move_p):
	Use HARD_REGISTER_NUM_P.
	(rs6000_secondary_reload_gpr): Use HARD_REGISTER_NUM_P and MEM_P.
	(rs6000_secondary_reload_class): Use HARD_REGISTER_NUM_P, REG_P,
	SUBREG_P and SYMBOL_REF_P.
	(register_to_reg_type, rs6000_secondary_reload_inner): Use SUBREG_P
	and HARD_REGISTER_NUM_P.
	(rs6000_adjust_vec_address): Use HARD_REGISTER_NUM_P and
	reg_or_subregno.
	(rs6000_adjust_cost, find_mem_ref): Use MEM_P.
	(macho_lo_sum_memory_operand, rs6000_eliminate_indexed_memrefs): Use
	MEM_P and REG_P.
	(legitimate_indirect_address_p, legitimate_lo_sum_address_p,
	registers_ok_for_quad_peep, rs6000_output_function_epilogue,
	find_addr_reg): Use REG_P.
	(altivec_expand_vec_perm_const): Use REG_P and SUBREG_P.
	(rs6000_emit_le_vsx_move): Use SUBREG_P.
	(offsettable_ok_by_alignment, constant_pool_expr_p,
	legitimate_small_data_p, rs6000_output_dwarf_dtprel,
	rs6000_delegitimize_address, rs6000_const_not_ok_for_debug_p,
	rs6000_cannot_force_const_mem, rs6000_output_addr_const_extra,
	rs6000_assemble_integer, create_TOC_reference,
	rs6000_emit_allocate_stack, rs6000_xcoff_encode_section_info,
	rs6000_call_aix, rs6000_call_aix): Use SYMBOL_REF_P.
	(rs6000_split_vec_extract_var): Use reg_or_subregno.
	* config/rs6000/rtems.h (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P): Use
	CONST_DOUBLE_P, CONST_INT_P and SYMBOL_REF_P.
	* config/rs6000/sysv4.h (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P): Likewise.
	* config/rs6000/xcoff.h (ASM_OUTPUT_SPECIAL_POOL_ENTRY_P): Likewise.
	* config/rs6000/rs6000.h (RS6000_SYMBOL_REF_TLS_P): Use SYMBOL_REF_P.
	(REGNO_OK_FOR_INDEX_P, REGNO_OK_FOR_BASE_P): Use HARD_REGISTER_NUM_P.
	(INT_REG_OK_FOR_INDEX_P, INT_REG_OK_FOR_BASE_P): Use HARD_REGISTER_P.
	(CONSTANT_ADDRESS_P): Use CONST_INT_P and SYMBOL_REF_P.
	* config/rs6000/rs6000.md (define_expands strlensi, mod<mode>3
	and cbranch<mode>4): Use CONST_INT_P.
	(multiple define_splits): Use REG_P and SUBREG_P.
	(define_expands call, call_value): Use MEM_P.
	(define_expands sibcall, sibcall_value): Use CONST_INT_P and  MEM_P.
	(define insn *mtcrfsi): Use CONST_INT_P and REG_P.
	* config/rs6000/vsx.md (*vsx_le_perm_load_<mode>,
	*vsx_le_perm_load_v8hi, *vsx_le_perm_load_v16qi): Use HARD_REGISTER_P
	and HARD_REGISTER_NUM_P.
	(multiple define_splits): Use HARD_REGISTER_NUM_P.

2019-01-24  Uroš Bizjak  <ubizjak@gmail.com>

	PR rtl-optimization/88948
	* rtl.h (prepare_copy_insn): New prototype.
	* gcse.c (prepare_copy_insn): New function, split out from
	process_insert_insn.
	(process_insert_insn): Use prepare_copy_insn.
	* store-motion.c (replace_store_insn): Use prepare_copy_insn
	instead of gen_move_insn.

2019-01-24  Jakub Jelinek  <jakub@redhat.com>

	PR debug/89006
	* config/i386/i386.c (ix86_pic_register_p): Return true for
	UNSPEC_SET_GOT too.

	PR tree-optimization/88964
	* gimple-loop-interchange.cc (loop_cand::analyze_induction_var): Also
	punt if HONOR_SNANS (chrec).

	PR middle-end/89015
	* tree-nested.c (convert_nonlocal_reference_stmt,
	convert_local_reference_stmt, convert_tramp_reference_stmt,
	convert_gimple_call) <case GIMPLE_OMP_TEAMS>: Treat
	gimple_omp_teams_host teams stmts like GIMPLE_OMP_PARALLEL
	or GIMPLE_OMP_TASK.

	PR tree-optimization/89027
	* tree-inline.c (add_clobbers_to_eh_landing_pad): Don't add clobbers
	for "omp simd array" variables.

2019-01-24  Richard Earnshaw  <rearnsha@arm.com>

	PR target/88469
	* profile-count.h (profile_count): On ARM systems using GCC 6/7/8
	force the alignment of m_val.

2019-01-24  Richard Biener  <rguenther@suse.de>

	PR lto/87187
	* tree-streamer-out.c (write_ts_decl_common_tree_pointers):
	When in "legacy" debug mode make sure to reset self-origins.

2019-01-24  Martin Liska  <mliska@suse.cz>

	PR gcov-profile/88994
	* gcov-io.c (mangle_path): Do not allocate a bigger buffer,
	result will be always smaller or equal to the original.
	* gcov.c (mangle_name): Fix else branch where we should
	also copy to PTR and shift the pointer.

2019-01-24  Xiong Hu Luo  <luoxhu@linux.vnet.ibm.com>

	* tree-ssa-dom.c (test_for_singularity): Fix a comment typo.
	* vr-values.c (find_case_label_ranges): Fix a comment typo.

2019-01-23  Xuepeng Guo  <xuepeng.guo@intel.com>

	* common/config/i386/i386-common.c
	(OPTION_MASK_ISA_ENQCMD_SET,
	OPTION_MASK_ISA_ENQCMD_UNSET): New macros.
	(ix86_handle_option): Handle -menqcmd.
	* config.gcc (enqcmdintrin.h): New header file.
	* config/i386/cpuid.h (bit_ENQCMD): New bit.
	* config/i386/driver-i386.c (host_detect_local_cpu): Handle
	-menqcmd.
	* config/i386/i386-builtin-types.def ((INT, PVOID, PCVOID)): New
	function type.
	* config/i386/i386-builtin.def (__builtin_ia32_enqcmd,
	__builtin_ia32_enqcmds): New builtins.
	* config/i386/i386-c.c (__ENQCMD__): New macro.
	* config/i386/i386-option.c (ix86_target_string): Add
	-menqcmd.
	(ix86_valid_target_attribute_inner_p): Likewise.
	* config/i386/i386-expand.c
	(ix86_expand_builtin): Expand IX86_BUILTIN_ENQCMD and
	IX86_BUILTIN_ENQCMDS.
	* config/i386/i386.h (TARGET_ENQCMD): New.
	* config/i386/i386.md (UNSPECV_ENQCMD, UNSPECV_ENQCMDS): New.
	(@enqcmd<enqcmd_sfx>_<mode>): New insn pattern.
	(movdir64b_<mode>): Parameterize to enable share expansion code
	with ENQCMD in function ix86_expand_builtin.
	* config/i386/i386.opt: Add -menqcmd.
	* config/i386/immintrin.h: Include enqcmdintrin.h.
	* config/i386/enqcmdintrin.h: New intrinsic file.
	* doc/invoke.texi: Add -menqcmd.

2019-01-23  Bin Cheng  <bin.cheng@arm.com>
	    Steve Ellcey  <sellcey@marvell.com>

	PR target/85711
	* recog.c (address_operand): Return false on wrong mode for address.
	(constrain_operands): Check for mode with 'p' constraint.

2019-01-23  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/88998
	* config/i386/sse.md (sse2_cvtpi2pd): Add SSE alternatives.
	Disparage MMX alternative.
	(sse2_cvtpd2pi): Ditto.
	(sse2_cvttpd2pi): Ditto.

2019-01-23  David Malcolm  <dmalcolm@redhat.com>

	PR driver/89014
	* config/aarch64/driver-aarch64.c (host_detect_local_cpu): Fix
	use-after-free of the result of
	aarch64_get_extension_string_for_isa_flags.

2019-01-23  Jakub Jelinek  <jakub@redhat.com>

	PR c/44715
	* doc/extend.texi: Document break and continue behavior in
	statement expressions.

2019-01-23  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/89008
	* tree-ssa-reassoc.c (eliminate_using_constants): For * 0 do
	not leave another stray operand.

2019-01-23  Jakub Jelinek  <jakub@redhat.com>

	* BASE-VER: Bump to 9.0.1.

2019-01-23  Eric Botcazou  <ebotcazou@adacore.com>

	* cgraphunit.c (cgraph_node::expand_thunk): When expanding a GIMPLE
	thunk that returns by reference, use the type of the return object
	of the thunk instead of that of the alias to build the dereference.

2019-01-23  Vineet Gupta  <vgupta@synopsys.com>

	* config/arc/atomic.md: Add operand to DMB instruction.

2019-01-23  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/88964
	* gimple-loop-interchange.cc (loop_cand::analyze_induction_var): Use
	build_zero_cst instead of build_int_cst.  Return false for loop
	invariants which honor signed zeros.

2019-01-22  Segher Boessenkool  <segher@kernel.crashing.org>

	* doc/invoke.texi (-fsplit-paths): This is enabled by default at -O3.

2019-01-22  Jakub Jelinek  <jakub@redhat.com>

	PR target/88965
	* config/rs6000/rs6000.c: Include tree-vrp.h and tree-ssanames.h.
	(rs6000_gimple_fold_builtin): If MEM_REF address doesn't satisfy
	is_gimple_mem_ref_addr predicate, force it into a SSA_NAME first.

	PR middle-end/88968
	* gimplify.c (gimplify_omp_atomic): Handle bitfield atomics with
	non-integral DECL_BIT_FIELD_REPRESENTATIVEs.

	PR target/87064
	* config/rs6000/vsx.md (*vsx_reduc_<VEC_reduc_name>_v2df_scalar):
	Disable for little endian.

2019-01-22  Richard Earnshaw  <rearnsha@arm.com>

	PR target/88469
	* config/arm/arm.c (arm_needs_double_word_align): Check
	DECL_BIT_FIELD_TYPE.

2019-01-22  Hongtao Liu  <hongtao.liu@intel.com>
	    H.J. Lu  <hongjiu.lu@intel.com>

	PR target/88909
	* config/i386/i386-builtin.def: Add mask2 to all builtin
	initializations.  Merge ARGS2 and SPECIAL_ARGS2 into ARGS and
	SPECIAL_ARGS.
	* config/i386/i386.c (BDESC): Add mask2 to the definition.
	(BDESC_FIRST): Likewise.
	(define_builtin): Add an argument for mask2.  Updated to handle
	both ix86_isa_flags and ix86_isa_flags2.
	(define_builtin_const): Likewise.
	(define_builtin_pure): Likewise.
	(define_builtin2): Deleted.
	(define_builtin_const2): Likewise.
	(builtin_description): Add a member, mask2.
	(bdesc_*): Add mask2 to builtin initializations.
	(ix86_init_mmx_sse_builtins): Update calls to def_builtin,
	def_builtin_const and def_builtin_pure.  Remove SPECIAL_ARGS2
	support.
	(ix86_get_builtin_func_type): Remove SPECIAL_ARGS2 support.

2019-01-22  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/88954
	* config/i386/i386.c (ix86_force_load_from_GOT_p): Also check
	noplt attribute.

2019-01-22  Richard Earnshaw  <rearnsha@arm.com>

	PR target/88469
	* config/arm/arm.c (arm_needs_doubleword_align): Return 2 if a record's
	alignment is dominated by a bitfield with 64-bit aligned base type.
	(arm_function_arg): Emit a warning if the alignment has changed since
	earlier GCC releases.
	(arm_function_arg_boundary): Likewise.
	(arm_setup_incoming_varargs): Likewise.

2019-01-22  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88862
	* graphite-scop-detection.c
	(scop_detection::graphite_can_represent_scev): Reject ADDR_EXPR.

2019-01-22  Andrew Stubbs  <ams@codesourcery.com>

	* doc/extend.tex (AMD GCN Function Attributes): New section.
	* doc/install.texi (amdgcn-unknown-amdhsa): New instructions.
	* doc/invoke.texi (AMD GCN Options): New section.
	* doc/md.texi (Constraints for Particular Machines): Add AMD GCN.

2019-01-22  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/sparc.c (parc_delegitimize_address): Recognize the GOT
	register and decoded HIGH/LO_SUM combinations for labels in PIC mode.

2019-01-22  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/88044
	* tree-ssa-loop-niter.c (number_of_iterations_cond): If condition
	is false in the first iteration, but !every_iteration, return false
	instead of true with niter->niter zero.

	PR rtl-optimization/88904
	* cfgcleanup.c (thread_jump): Verify cond2 doesn't mention
	any nonequal registers before processing BB_END (b).

	PR target/88905
	* optabs.c (add_equal_note): Add op0_mode argument, use it instead of
	GET_MODE (op0).
	(expand_binop_directly, expand_doubleword_clz,
	expand_doubleword_popcount, expand_ctz, expand_ffs,
	expand_unop_direct, maybe_emit_unop_insn): Adjust callers.

	PR rtl-optimization/49429
	PR target/49454
	PR rtl-optimization/86334
	PR target/88906
	* expr.c (emit_block_move_hints): Move marking of MEM_EXPRs
	addressable from here...
	(emit_block_op_via_libcall): ... to here.

2019-01-22  Richard Biener  <rguenther@suse.de>

	* tree-vect-loop.c (vect_analyze_loop_operations): Use
	auto_vec for cost vector to fix memleak.
	(vectorize_fold_left_reduction): Properly gather SLP defs.
	(vectorizable_comparison): Do not swap operands to properly
	gather SLP defs.

2019-01-22  Alan Modra  <amodra@gmail.com>

	PR target/88614
	* config/rs6000/predicates.md (unspec_tls): Ensure GOT reg
	stays a reg.  Allow a const_int.
	* config/rs6000/rs6000-protos.h (rs6000_output_tlsargs): Declare.
	* config/rs6000/rs6000.h (IS_V4_FP_ARGS): Define.
	(IS_NOMARK_TLSGETADDR): Define.
	* config/rs6000/rs6000.c (edit_tls_call_insn): Delete.
	(rs6000_output_tlsargs): New function.
	(rs6000_legitimize_tls_address): Don't say a !TARGET_TLS_MARKERS
	__tls_get_addr call takes an arg.
	(rs6000_call_sysv): Generate sysv4 secure plt call pattern here..
	* config/rs6000/rs6000.md (call_nonlocal_sysv): ..rather than here,
	delete split..
	(call_value_nonlocal_sysv): ..or here, delete split.
	(tls_gdld_nomark): Delete.
	(call_value_indirect_nonlocal_sysv): Use unspec_tls as operand2
	predicate.  Call rs6000_output_tlsargs.  Adjust length to suit.
	(call_value_nonlocal_sysv): Likewise.
	(call_value_nonlocal_sysv_secure): Likewise.
	(call_value_nonlocal_aix): Likewise.
	(call_value_indirect_aix): Likewise.
	(call_value_indirect_elfv2): Likewise.
	(call_value_local32, call_value_local64): Disable for no-mark tls.
	(call_value_local_aix): Likewise.

2019-01-21  Uroš Bizjak  <ubizjak@gmail.com>

	PR target/88938
	* config/i386/i386.c (ix86_expand_builtin) [case IX86_BUILTIN_BEXTRI32,
	case IX86_BUILTIN_BEXTRI64]: Sanitize operands.

2019-01-21  Michael Ploujnikov  <michael.ploujnikov@oracle.com>

	* hash-map-tests.c (test_map_of_strings_to_int): Show how to use
	string contents as hash_map keys.

2019-01-21  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR c/88928
	* c-warn.c (check_alignment_of_packed_member): Add a boolean parameter
	for rvalue context.  Handle rvalues correctly.  Use min_align_of_type
	instead of TYPE_ALIGN.
	(check_address_or_pointer_of_packed_member): Handle rvalues coorrectly.
	Use min_align_of_type instead of TYPE_ALIGN_UNIT.  Check for NULL
	pointer from TYPE_STUB_DECL.

2019-01-21  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88934
	* tree-vect-slp.c (vect_mask_constant_operand_p): Always look
	at the possibly non-constant operand.
	(vect_get_constant_vectors): Adjust.

2019-01-21  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/71659
	* config/i386/adxintrin.h: Just check _IMMINTRIN_H_INCLUDED.
	* config/i386/clflushoptintrin.h: Check _IMMINTRIN_H_INCLUDED
	instead of _X86INTRIN_H_INCLUDED.
	* onfig/i386/clwbintrin.h: Likewise.
	* config/i386/pkuintrin.h: Likewise.
	* config/i386/prfchwintrin.h: Likewise.
	* config/i386/rdseedintrin.h: Likewise.
	* config/i386/wbnoinvdintrin.h: Likewise.
	* config/i386/xsavecintrin.h: Likewise.
	* config/i386/xsavesintrin.h: Likewise.
	* config/i386/fxsrintrin.h: Enable _IMMINTRIN_H_INCLUDED check.
	* config/i386/xsaveintrin.h: Likewise.
	* config/i386/xsaveoptintrin.h: Likewise.
	* config/i386/x86intrin.h: Move "#include" <rdseedintrin.h>,
	<prfchwintrin.h>, <fxsrintrin.h>, <xsaveintrin.h>,
	<xsaveoptintrin.h>, <adxintrin.h>, <clwbintrin.h>,
	<clflushoptintrin.h>, <xsavesintrin.h>, <xsavecintrin.h>,
	<wbnoinvdintrin.h> and <pkuintrin.h> to ...
	* config/i386/immintrin.h: Here.

2019-01-20  Martin Jambor  <mjambor@suse.cz>

	PR ipa/87615
	* ipa-prop.h (struct ipa_func_body_info): Replaced field aa_walked
	with aa_walk_budget.
	* cgraph.h (ipa_polymorphic_call_context::get_dynamic_type): Add
	aa_walk_budget_p parameter.
	* ipa-fnsummary.c (unmodified_parm_1): New parameter fbi.  Limit AA
	walk.  Updated all callers.
	(unmodified_parm): New parameter fbi, pass it to unmodified_parm_1.
	(eliminated_by_inlining_prob): New parameter fbi, pass it on to
	unmodified_parm.
	(will_be_nonconstant_expr_predicate): New parameter fbi, removed
	parameter info.  Extract info from fbi.  Pass fbi to recursive calls
	and to unmodified_parm.
	(phi_result_unknown_predicate): New parameter fbi, removed parameter
	info, updated call to will_be_nonconstant_expr_predicate.
	(param_change_prob): New parameter fbi, limit AA walking.
	(analyze_function_body): Initialize aa_walk_budget in fbi.  Update
	calls to various above functions.
	* ipa-polymorphic-call.c (get_dynamic_type): Add aa_walk_budget_p
	parameter.  Use it to limit AA walking.
	* ipa-prop.c (detect_type_change_from_memory_writes): New parameter
	fbi, limit AA walk.
	(detect_type_change): New parameter fbi, pass it on to
	detect_type_change_from_memory_writes.
	(detect_type_change_ssa): Likewise.
	(aa_overwalked): Removed.
	(parm_preserved_before_stmt_p): Assume fbi is never NULL, stream line
	accordingly, adjust to the neew AA limiting scheme.
	(parm_ref_data_preserved_p): Likewise.
	(ipa_compute_jump_functions_for_edge): Adjust call to
	get_dynamic_type.
	(ipa_analyze_call_uses): Likewise.
	(ipa_analyze_virtual_call_uses): Pass fbi to detect_type_change_ssa.
	(ipa_analyze_node): Initialize aa_walk_budget.
	(ipcp_transform_function): Likewise.
	* tree-ssa-sccvn.c (eliminate_dom_walker::eliminate_stmt): Update call
	to get_dynamic_type.

2019-01-19  Jakub Jelinek  <jakub@redhat.com>

	* config/aarch64/aarch64.c (aarch64_stack_protect_guard): Move
	outside of #if CHECKING_P code.

2019-01-19  Richard Sandiford  <richard.sandiford@arm.com>

	* gimple-loop-versioning.cc (loop_versioning::dump_inner_likelihood):
	New function, split out from...
	(loop_versioning::analyze_stride): ...here.
	(loop_versioning::find_per_loop_multiplication): Use gassign.
	(loop_versioning::analyze_term_using_scevs): Return a success code.
	(loop_versioning::analyze_arbitrary_term): New function.
	(loop_versioning::analyze_address_fragment): Use
	analyze_arbitrary_term if all else fails.

2019-01-18  Segher Boessenkool  <segher@kernel.crashing.org>

	PR target/88892
	* config/rs6000/rs6000.md (*movsi_from_df): Allow only register
	operands.

2019-01-18  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88903
	* tree-vect-stmts.c (vectorizable_shift): Verify we see all
	scalar stmts a SLP shift amount is composed of when detecting
	shifts by scalars.

2019-01-18  Richard Earnshaw  <rearnsha@arm.com>

	PR target/88799
	* config/arm/arm-cpus.in (mp): New feature.
	(sec): New feature.
	(fgroup ARMv7ve): Add mp and sec features.
	(arch armv7-a): Add options to allow mp and sec extensions.
	(cpu generic-armv7-a): Add options to allow mp and sec extensions.
	(cpu cortex-a5, cpu cortex-7, cpu cortex-a9): Add mp and sec
	extenstions to the base architecture.
	(cpu cortex-a8): Add sec extension to the base architecture.
	(cpu marvell-pj4): Add mp and sec extensions to the base architecture.
	* config/arm/t-aprofile (MULTILIB_MATCHES): Map all armv7-a arch
	variants down to the base v7-a varaint.
	* config/arm/t-multilib (v7_a_arch_variants): New variable.
	* doc/invoke.texi (ARM Options): Add +mp and +sec to the list
	of permitted extensions for -march=armv7-a and for
	-mcpu=generic-armv7-a.

2019-01-18  Martin Liska  <mliska@suse.cz>

	* params.def: Fix comment.
	* tree-profile.c (gimple_init_gcov_profiler): Bump function
	name.
	(gimple_gen_ic_func_profiler): Likewise.

2019-01-18  Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	* config/aarch64/aarch64-opts.h (enum stack_protector_guard): New
	* config/aarch64/aarch64.c (aarch64_override_options_internal): Handle
	and put in error checks for stack protector guard options.
	(aarch64_stack_protect_guard): New.
	(TARGET_STACK_PROTECT_GUARD): Define.
	* config/aarch64/aarch64.md (UNSPEC_SSP_SYSREG): New.
	(reg_stack_protect_address<mode>): New.
	(stack_protect_set): Adjust for SSP_GLOBAL.
	(stack_protect_test): Likewise.
	* config/aarch64/aarch64.opt (-mstack-protector-guard-reg): New.
	(-mstack-protector-guard): Likewise.
	(-mstack-protector-guard-offset): Likewise.

2019-01-18  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/86214
	* tree-inline.h (struct copy_body_data): Add
	add_clobbers_to_eh_landing_pads member.
	* tree-inline.c (add_clobbers_to_eh_landing_pad): New function.
	(copy_edges_for_bb): Call it if EH edge destination is <
	id->add_clobbers_to_eh_landing_pads.  Fix a comment typo.
	(expand_call_inline): Set id->add_clobbers_to_eh_landing_pads
	if flag_stack_reuse != SR_NONE and clear it afterwards.

2019-01-18  Christophe Lyon  <christophe.lyon@linaro.org>

	PR target/85596
	* doc/install.texi (with-multilib-list): Document for aarch64.

2019-01-18  Jakub Jelinek  <jakub@redhat.com>

	PR target/88734
	* config/arm/arm_neon.h: Fix #pragma GCC target syntax - replace
	(("..."))) with ("...").

2019-01-18  Sebastian Huber  <sebastian.huber@embedded-brains.de>

	* doc/extend.texi (Built-in Functions for Memory Model Aware
	Atomic Operations): Document atomic fetch and nand.

2019-01-18  Martin Liska  <mliska@suse.cz>
	    Richard Biener  <rguenther@suse.de>

	PR middle-end/88587
	* cgraph.h (create_version_clone_with_body): Add new argument
	with attributes.
	* cgraphclones.c (cgraph_node::create_version_clone): Add
	DECL_ATTRIBUTES to a newly created decl.  And call
	valid_attribute_p so that proper cl_target_optimization_node
	is set for the newly created declaration.
	* multiple_target.c (create_target_clone): Set DECL_ATTRIBUTES
	for declaration.
	(expand_target_clones): Do not call valid_attribute_p, it must
	be already done.
	* tree-inline.c (copy_decl_for_dup_finish): Reset mode for
	vector types.

2019-01-17  Jakub Jelinek  <jakub@redhat.com>

	PR target/88734
	* config/aarch64/arm_neon.h: Fix #pragma GCC target syntax - replace
	(("..."))) with ("...").  Use arch=armv8.2-a+sha3 instead of
	arch=armv8.2-a+crypto for vsha512hq_u64 etc. intrinsics.

2019-01-17  Martin Sebor  <msebor@redhat.com>

	PR middle-end/88273
	* gimple-ssa-warn-restrict.c (builtin_memref::extend_offset_range):
	Handle anti-ranges the same as no range at all.

2018-01-17  Steve Ellcey  <sellcey@cavium.com>

	* config/aarch64/aarch64.c (cgraph.h): New include.
	(intl.h): New include.
	(supported_simd_type): New function.
	(currently_supported_simd_type): Ditto.
	(aarch64_simd_clone_compute_vecsize_and_simdlen): Ditto.
	(aarch64_simd_clone_adjust): Ditto.
	(aarch64_simd_clone_usable): Ditto.
	(TARGET_SIMD_CLONE_COMPUTE_VECSIZE_AND_SIMDLEN): New macro.
	(TARGET_SIMD_CLONE_ADJUST): Ditto.
	(TARGET_SIMD_CLONE_USABLE): Ditto.
	* config/i386/i386.c (ix86_simd_clone_adjust): Add definition check.
	* omp-simd-clone.c (expand_simd_clones): Add targetm.simd_clone.adjust
	call.

2019-01-17  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/88800
	* gimple-fold.c (gimple_fold_builtin_memory_op): Avoid checking
	NO_WARNING bit here.  Avoid folding out-of-bounds calls.
	* gimple-ssa-warn-restrict.c (maybe_diag_offset_bounds): Remove
	redundant argument.  Add new argument and issue diagnostics under
	its control.  Detect out-of-bounds access even with warnings
	disabled.
	(check_bounds_or_overlap): Change return type.  Add argument.
	(wrestrict_dom_walker::check_call): Adjust.
	* gimple-ssa-warn-restrict.h (check_bounds_or_overlap): Add argument.
	* tree-ssa-strlen.c (handle_builtin_strcpy): Adjust to change in
	check_bounds_or_overlap's return value.
	(handle_builtin_stxncpy): Same.
	(handle_builtin_strcat): Same.

2019-01-17  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>

	* doc/sourcebuild.texi: Document dg-add-options sqrt_insn.

2019-01-17  Andrew Stubbs  <ams@codesourcery.com>

	* doc/sourcebuild.texi: Document dg-require-effective-target
	llvm_binutils and offload_gcn.

2019-01-17  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>

	* doc/sourcebuild.texi: Document dg-required-effective-target
	exceptions.

2019-01-17  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>
	    Jan Hubicka  <hubicka@ucw.cz>
	    Martin Jambor  <mjambor@suse.cz>

	* config.gcc: Add amdgcn*-*-amdhsa configuration.
	* configure.ac: Check for dlopen.
	* configure: Regenerate.

2019-01-17  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>
	    Jan Hubicka  <hubicka@ucw.cz>
	    Martin Jambor  <mjambor@suse.cz>

	* common/config/gcn/gcn-common.c: New file.
	* config/gcn/driver-gcn.c: New file.
	* config/gcn/gcn-builtins.def: New file.
	* config/gcn/gcn-hsa.h: New file.
	* config/gcn/gcn-modes.def: New file.
	* config/gcn/gcn-opts.h: New file.
	* config/gcn/gcn-passes.def: New file.
	* config/gcn/gcn-protos.h: New file.
	* config/gcn/gcn-run.c: New file.
	* config/gcn/gcn-tree.c: New file.
	* config/gcn/gcn.c: New file.
	* config/gcn/gcn.h: New file.
	* config/gcn/gcn.opt: New file.
	* config/gcn/t-gcn-hsa: New file.

2019-01-17  Andrew Stubbs  <ams@codesourcery.com>
	    Kwok Cheung Yeung  <kcy@codesourcery.com>
	    Julian Brown  <julian@codesourcery.com>
	    Tom de Vries  <tom@codesourcery.com>
	    Jan Hubicka  <hubicka@ucw.cz>
	    Martin Jambor  <mjambor@suse.cz>

	* config/gcn/constraints.md: New file.
	* config/gcn/gcn-valu.md: New file.
	* config/gcn/gcn.md: New file.
	* config/gcn/predicates.md: New file.

2019-01-17  Eric Botcazou  <ebotcazou@adacore.com>

	* gimple-ssa-isolate-paths.c (stmt_uses_name_in_undefined_way): Replace
	flag_non_call_exceptions with cfun->can_throw_non_call_exceptions.
	(stmt_uses_0_or_null_in_undefined_way): Likewise.
	* tree-ssa-alias.c (same_addr_size_stores_p): Likewise.

2019-01-17  Tamar Christina  <tamar.christina@arm.com>

	PR target/88851
	* config/aarch64/aarch64.md (STACK_CLASH_SVE_CFA_REGNUM): New.
	* config/aarch64/aarch64.c (aarch64_allocate_and_probe_stack_space): Use
	it and document registers.

2019-01-17  Kyrylo Tkachov  <kyrylo.tkachov@arm.com>

	* config/aarch64/aarch64.c (ares_tunings): Define.
	* config/aarch64/aarch64-cores.def (ares): Use the above.

2019-01-17  Wei Xiao  <wei3.xiao@intel.com>

	PR target/88794
	Revert:
	2018-11-06  Wei Xiao  <wei3.xiao@intel.com>

	* config/i386/avx512fintrin.h: Update VFIXUPIMM* intrinsics.
	(_mm512_fixupimm_round_pd): Update parameters and builtin.
	(_mm512_maskz_fixupimm_round_pd): Ditto.
	(_mm512_fixupimm_round_ps): Ditto.
	(_mm512_maskz_fixupimm_round_ps): Ditto.
	(_mm_fixupimm_round_sd): Ditto.
	(_mm_maskz_fixupimm_round_sd): Ditto.
	(_mm_fixupimm_round_ss): Ditto.
	(_mm_maskz_fixupimm_round_ss): Ditto.
	(_mm512_fixupimm_pd): Ditto.
	(_mm512_maskz_fixupimm_pd): Ditto.
	(_mm512_fixupimm_ps): Ditto.
	(_mm512_maskz_fixupimm_ps): Ditto.
	(_mm_fixupimm_sd): Ditto.
	(_mm_maskz_fixupimm_sd): Ditto.
	(_mm_fixupimm_ss): Ditto.
	(_mm_maskz_fixupimm_ss): Ditto.
	(_mm512_mask_fixupimm_round_pd): Update builtin.
	(_mm512_mask_fixupimm_round_ps): Ditto.
	(_mm_mask_fixupimm_round_sd): Ditto.
	(_mm_mask_fixupimm_round_ss): Ditto.
	(_mm512_mask_fixupimm_pd): Ditto.
	(_mm512_mask_fixupimm_ps): Ditto.
	(_mm_mask_fixupimm_sd): Ditto.
	(_mm_mask_fixupimm_ss): Ditto.
	* config/i386/avx512vlintrin.h:
	(_mm256_fixupimm_pd): Update parameters and builtin.
	(_mm256_maskz_fixupimm_pd): Ditto.
	(_mm256_fixupimm_ps): Ditto.
	(_mm256_maskz_fixupimm_ps): Ditto.
	(_mm_fixupimm_pd): Ditto.
	(_mm_maskz_fixupimm_pd): Ditto.
	(_mm_fixupimm_ps): Ditto.
	(_mm_maskz_fixupimm_ps): Ditto.
	(_mm256_mask_fixupimm_pd): Update builtin.
	(_mm256_mask_fixupimm_ps): Ditto.
	(_mm_mask_fixupimm_pd): Ditto.
	(_mm_mask_fixupimm_ps): Ditto.
	* config/i386/i386-builtin-types.def: Add new types and remove
	useless ones.
	* config/i386/i386-builtin.def: Update builtin definitions.
	* config/i386/i386.c: Handle new builtin types and remove useless ones.
	* config/i386/sse.md: Update VFIXUPIMM* patterns.
	(<avx512>_fixupimm<mode>_maskz<round_saeonly_expand_name>): Update.
	(<avx512>_fixupimm<mode><sd_maskz_name><round_saeonly_name>): Update.
	(<avx512>_fixupimm<mode>_mask<round_saeonly_name>): Update.
	(avx512f_sfixupimm<mode>_maskz<round_saeonly_expand_name>): Update.
	(avx512f_sfixupimm<mode><sd_maskz_name><round_saeonly_name>): Update.
	(avx512f_sfixupimm<mode>_mask<round_saeonly_name>): Update.
	* config/i386/subst.md:
	(round_saeonly_sd_mask_operand4): Add new subst_attr.
	(round_saeonly_sd_mask_op4): Ditto.
	(round_saeonly_expand_operand5): Ditto.
	(round_saeonly_expand): Update.

2019-01-17  Wei Xiao  <wei3.xiao@intel.com>

	PR target/88794
	Revert:
	2018-11-12  Wei Xiao  <wei3.xiao@intel.com>

	* config/i386/sse.md: Combine VFIXUPIMM* patterns
	(<avx512>_fixupimm<mode>_maskz<round_saeonly_expand_name>): Update.
	(<avx512>_fixupimm<mode><sd_maskz_name><round_saeonly_name>): Update.
	(<avx512>_fixupimm<mode>_mask<round_saeonly_name>): Remove.
	(avx512f_sfixupimm<mode>_maskz<round_saeonly_expand_name>): Update.
	(avx512f_sfixupimm<mode><sd_maskz_name><round_saeonly_name>): Update.
	(avx512f_sfixupimm<mode>_mask<round_saeonly_name>): Remove.

2019-01-17  Wei Xiao  <wei3.xiao@intel.com>

	PR target/88794
	Revert:
	2018-12-15  Jakub Jelinek  <jakub@redhat.com>

	PR target/88489
	* config/i386/sse.md (UNSPEC_SFIXUPIMM): New unspec enumerator.
	(avx512f_sfixupimm<mode><mask_name><round_saeonly_name>): Use it
	instead of UNSPEC_FIXUPIMM.

2019-01-17  Richard Biener  <rguenther@suse.de>

	PR lto/86736
	* dwarf2out.c (want_pubnames): Never generate pubnames sections
	and friends for the LTO part of debug info.

2019-01-17  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/86214
	* cfgexpand.c (add_stack_var_conflict): Don't add any conflicts
	if x == y.

	PR rtl-optimization/88870
	* dce.c (deletable_insn_p): Never delete const/pure calls that can
	throw if we can't alter the cfg or delete dead exceptions.
	(mark_insn): Don't call find_call_stack_args for such calls.

2019-01-17  Kewen Lin  <linkw@gcc.gnu.org>

	* doc/extend.texi: Add four new prototypes for vec_ld and seven new
	prototypes for vec_st.
	* config/rs6000/rs6000-c.c (altivec_overloaded_builtins): Add entries
	for scalar address type variants of altivec_vec_ld/altivec_vec_st,
	mainly on signed/unsigned long long and double.

2019-01-16  David Malcolm  <dmalcolm@redhat.com>

	PR target/88861
	* combine.c (delete_noop_moves): Convert to "bool" return,
	returning true if any edges are eliminated.
	(combine_instructions): Also return true if delete_noop_moves
	returns true.

2019-01-16  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64-builtins.c (aarch64_simd_expand_args): Use
	correct max nunits for endian swap.
	(aarch64_expand_fcmla_builtin): Correct subreg code.
	* config/aarch64/aarch64-simd.md (aarch64_fcmla_lane<rot><mode>,
	aarch64_fcmla_laneq<rot>v4hf, aarch64_fcmlaq_lane<rot><mode>): Correct
	lane endianness.

2019-01-16  Uroš Bizjak  <ubizjak@gmail.com>

	* config/alpha/alpha.c (alpha_gimplify_va_arg):
	Handle split indirect COMPLEX_TYPE arguments.

2019-01-16  Richard Earnshaw  <rearnsha@arm.com>

	PR target/86891
	* config/aarch64/aarch64-modes.def: Add comment about how the carry
	bit is set by add and compare.
	(CC_ADC): New CC_MODE.
	* config/aarch64/aarch64.c (aarch64_select_cc_mode): Use variables
	to cache the code and mode of X.  Adjust the shape of a CC_Cmode
	comparison.  Add detection for CC_ADCmode.
	(aarch64_get_condition_code_1): Update code support for CC_Cmode.  Add
	CC_ADCmode.
	* config/aarch64/aarch64.md (uaddv<mode>4): Use LTU with CCmode.
	(uaddvti4): Comparison result is in CC_ADCmode and the condition is GEU.
	(add<mode>3_compareC_cconly_imm): Delete.  Merge into...
	(add<mode>3_compareC_cconly): ... this.  Restructure the comparison
	to eliminate the need for zero-extending the operands.
	(add<mode>3_compareC_imm): Delete.  Merge into ...
	(add<mode>3_compareC): ... this.  Restructure the comparison to
	eliminate the need for zero-extending the operands.
	(add<mode>3_carryin): Use LTU for the overflow detection.
	(add<mode>3_carryinC): Use CC_ADCmode for the result of the carry out.
	Reexpress comparison for overflow.
	(add<mode>3_carryinC_zero): Update for change to add<mode>3_carryinC.
	(add<mode>3_carryinC): Likewise.
	(add<mode>3_carryinV): Use LTU for carry between partials.
	* config/aarch64/predicates.md (aarch64_carry_operation): Update
	handling of CC_Cmode and add CC_ADCmode.
	(aarch64_borrow_operation): Likewise.

2019-01-16  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/arm-protos.h (neon_vcmla_lane_prepare_operands):
	Remove patternmode.
	* config/arm/arm.c (neon_vcmla_lane_prepare_operands): Likewise.
	* config/arm/neon.md (neon_vcmla_lane<rot><mode>,
	neon_vcmla_laneq<rot><mode>, neon_vcmlaq_lane<rot><mode>):
	Remove endianness conversion.

2019-01-16  Martin Liska  <mliska@suse.cz>

	* Makefile.in: Set TOOL_INCLUDE_DIR and NATIVE_SYSTEM_HEADER_DIR
	for GCC driver.
	* config/gnu-user.h (TARGET_F951_OPTIONS): Add 'finclude%s/' as
	a new argument.
	* gcc.c (add_sysrooted_hdrs_prefix): New function.
	(path_prefix_reset): Move up in the source file.
	(find_fortran_preinclude_file): Make complex search for the
	fortran header files.

2019-01-15  Nikhil Benesch  <nikhil.benesch@gmail.com>

	* godump.c (go_output_typedef): When outputting a typedef, refer
	to the underlying type by its name and not its structure.

2019-01-15  David Malcolm  <dmalcolm@redhat.com>

	PR c++/88795
	* tree.c (build_function_type): Assert that arg_types is not
	error_mark_node.

2019-01-15  Richard Sandiford  <richard.sandiford@arm.com>

	PR inline-asm/52813
	* doc/extend.texi: Document that listing the stack pointer in the
	clobber list of an asm is a deprecated feature.
	* common.opt (Wdeprecated): Moved from c-family/c.opt.
	* cfgexpand.c (asm_clobber_reg_is_valid): Issue a -Wdeprecated
	warning instead of an error for clobbers of the stack pointer.
	Add a note explaining why.

2019-01-15  Richard Biener  <rguenther@suse.de>

	PR debug/88046
	* dwarf2out.c (gen_member_die): Do not generate inheritance
	DIEs late.

2019-01-15  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88855
	* tree-if-conv.c (combine_blocks): Collect
	SSA_NAME_OCCURS_IN_ABNORMAL_PHI from propagated out virtuals.

2019-01-15  Tom de Vries  <tdevries@suse.de>

	PR target/80547
	* config/nvptx/nvptx.c (nvptx_goacc_reduction_init): Handle
	lhs == NULL_TREE for gang-level reduction.

2019-01-15  Richard Biener  <rguenther@suse.de>
	    Prathamesh Kulkarni  <prathamesh.kulkarni@linaro.org>

	PR ipa/88788
	* ipa-pure-const.c (malloc_candidate_p_1): Add parameter visited and
	return true if SSA_NAME is already marked in visited bitmap.
	(malloc_candidate_p): Pass visited to malloc_candidate_p_1.

2019-01-15  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/88775
	* match.pd (cmp (convert1?@2 addr@0) (convert2? addr@1)): Optimize
	equal == 0 equality pointer comparisons some more if compared in
	integral types and either one points to an automatic var and the
	other to a global, or we can prove at least one points to the middle
	or both point to start or both point to end.

2019-01-14  Andi Kleen  <ak@linux.intel.com>

	* Makefile.in: Lower autofdo sampling rate by 10x.
	* Makefile.tpl: Dito.

2019-01-14  Tom Honermann  <tom@honermann.net>

	* defaults.h: Define CHAR8_TYPE.

2019-01-14  Martin Sebor  <msebor@redhat.com>

	PR target/88638
	* doc/extend.texi (Darwin Format Checks): Clarify.

2019-01-14  Richard Biener  <rguenther@suse.de>

	* genmatch.c (dt_simplify::gen_1): Change dumping dependent on
	whether we are in (simplify ...) or (match ...) context.

2019-01-14  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/88796
	* emit-rtl.h (struct rtl_data): Add stack_protect_guard_decl field.
	* cfgexpand.c (stack_protect_prologue): Initialize
	crtl->stack_protect_guard_decl.
	* function.c (stack_protect_epilogue): Use it instead of calling
	targetm.stack_protect_guard again.
	* dse.c (check_mem_read_rtx): Ignore MEM_VOLATILE_P reads from
	MEMs with MEM_EXPR equal to crtl->stack_protect_guard or
	crtl->stack_protect_guard_decl.
	* config/i386/i386.c (ix86_stack_protect_guard): Set TREE_THIS_VOLATILE
	on the returned MEM_EXPR.

2019-01-12  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): Alow setting
	vector length using -fopenacc-dim.

2019-01-12  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims): Take larger vector
	lengths into account.

2019-01-12  Svante Signell  <svante.signell@gmail.com>

	* config/i386/gnu.h (TARGET_THREAD_SSP_OFFSET): Define.
	(TARGET_CAN_SPLIT_STACK): Define.
	(TARGET_THREAD_SPLIT_STACK_OFFSET): Define.

2019-01-05  Jan Hubicka  <hubicka@ucw.cz>

	* params.def (inline-unit-growth): Set to 40.

2019-01-12  Jakub Jelinek  <jakub@redhat.com>

	* tree-ssa-loop-ivopts.c (find_inv_vars): Fix a comment typo.

2019-01-12  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): In offloading
	region calling vector-partitionable routine, set default_vector_length
	to WARP_SIZE.

2019-01-12  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): Add an use new
	variable default_vector_length.

2019-01-12  Tom de Vries  <tdevries@suse.de>

	PR middle-end/88703
	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): Apply defaults
	from oacc_default_dims, as oacc_validate_dims would do it, and apply
	dimensions limits.

2019-01-12  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1)
	(nvptx_goacc_validate_dims): Add used parameter.
	* doc/tm.texi: Regenerate.
	* omp-offload.c (oacc_parse_default_dims, oacc_validate_dims): Add
	argument to call to targetm.goacc.validate_dims.
	(default_goacc_validate_dims): Add used
	parameter.
	* target.def (validate_dims): Add used parameter in DEFHOOK.
	* targhooks.h (default_goacc_validate_dims): Add used parameter.

2019-01-11  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/85956
	PR lto/88733
	* tree-inline.h (struct copy_body_data): Add adjust_array_error_bounds
	field.
	* tree-inline.c (remap_type_1): Formatting fix.  If TYPE_MAX_VALUE of
	ARRAY_TYPE's TYPE_DOMAIN is newly error_mark_node, replace it with
	a dummy "omp dummy var" variable if id->adjust_array_error_bounds.
	* omp-low.c (new_omp_context): Set cb.adjust_array_error_bounds.

2019-01-11  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/87305
	* lra-assigns.c
	(setup_live_pseudos_and_spill_after_risky_transforms): Add code
	for little endian pseudos used as paradoxical subreg.

2019-01-11  Jakub Jelinek  <jakub@redhat.com>

	PR tree-optimization/88693
	* tree-ssa-strlen.c (get_min_string_length): Don't set *full_string_p
	for STRING_CSTs that don't contain any NUL characters in the first
	TREE_STRING_LENGTH bytes.

2019-01-11  Alan Modra  <amodra@gmail.com>

	PR 88777
	PR 88614
	* genattrtab.c (min_fn): Don't translate values.
	(min_attr_value): Return INT_MAX when the value can't be calculated.
	Return minimum among any values that can be calculated.
	(max_attr_value): Adjust.

2019-01-11  Jakub Jelinek  <jakub@redhat.com>

	* Makefile.in (PLUGIN_HEADERS): Add $(INSN_ATTR_H).

2019-01-11  Steve Ellcey  <sellcey@marvell.com>

	* config/aarch64/aarch64.c (aarch64_simd_call_p): New function.
	(aarch64_hard_regno_call_part_clobbered): Add insn argument.
	(aarch64_return_call_with_max_clobbers): New function.
	(TARGET_RETURN_CALL_WITH_MAX_CLOBBERS): New macro.
	* config/avr/avr.c (avr_hard_regno_call_part_clobbered): Add insn
	argument.
	* config/i386/i386.c (ix86_hard_regno_call_part_clobbered): Ditto.
	* config/mips/mips.c (mips_hard_regno_call_part_clobbered): Ditto.
	* config/rs6000/rs6000.c (rs6000_hard_regno_call_part_clobbered): Ditto.
	* config/s390/s390.c (s390_hard_regno_call_part_clobbered): Ditto.
	* cselib.c (cselib_process_insn): Add argument to
	targetm.hard_regno_call_part_clobbered call.
	* ira-conflicts.c (ira_build_conflicts): Ditto.
	* ira-costs.c (ira_tune_allocno_costs): Ditto.
	* lra-constraints.c (inherit_reload_reg): Ditto.
	* lra-int.h (struct lra_reg): Add call_insn field, remove call_p field.
	* lra-lives.c (check_pseudos_live_through_calls): Add call_insn
	argument.  Call targetm.return_call_with_max_clobbers.
	Add argument to targetm.hard_regno_call_part_clobbered call.
	(calls_have_same_clobbers_p): New function.
	(process_bb_lives): Add call_insn and last_call_insn variables.
	Pass call_insn to check_pseudos_live_through_calls.
	Modify if stmt to check targetm.return_call_with_max_clobbers.
	Update setting of flush variable.
	(lra_create_live_ranges_1): Set call_insn to NULL instead of call_p
	to false.
	* lra.c (initialize_lra_reg_info_element): Set call_insn to NULL.
	* regcprop.c (copyprop_hardreg_forward_1): Add argument to
	targetm.hard_regno_call_part_clobbered call.
	* reginfo.c (choose_hard_reg_mode): Ditto.
	* regrename.c (check_new_reg_p): Ditto.
	* reload.c (find_equiv_reg): Ditto.
	* reload1.c (emit_reload_insns): Ditto.
	* sched-deps.c (deps_analyze_insn): Ditto.
	* sel-sched.c (init_regs_for_mode): Ditto.
	(mark_unavailable_hard_regs): Ditto.
	* targhooks.c (default_dwarf_frame_reg_mode): Ditto.
	* target.def (hard_regno_call_part_clobbered): Add insn argument.
	(return_call_with_max_clobbers): New target function.
	* doc/tm.texi: Regenerate.
	* doc/tm.texi.in (TARGET_RETURN_CALL_WITH_MAX_CLOBBERS): New hook.
	* hooks.c (hook_bool_uint_mode_false): Change to
	hook_bool_insn_uint_mode_false.
	* hooks.h (hook_bool_uint_mode_false): Ditto.

2019-01-11  Steve Ellcey  <sellcey@marvell.com>

	* config/aarch64/aarch64.c (aarch64_simd_call_p): New function.
	(aarch64_remove_extra_call_preserved_regs): New function.
	(TARGET_REMOVE_EXTRA_CALL_PRESERVED_REGS): New macro.
	* doc/tm.texi.in (TARGET_REMOVE_EXTRA_CALL_PRESERVED_REGS): New hook.
	* doc/tm.texi: Regenerate.
	* final.c (get_call_reg_set_usage): Call new hook.
	* target.def (remove_extra_call_preserved_regs): New hook.
	* targhooks.c (default_remove_extra_call_preserved_regs): New function.
	* targhooks.h (default_remove_extra_call_preserved_regs): New function.

2019-01-11  Jakub Jelinek  <jakub@redhat.com>

	PR bootstrap/88714
	* passes.c (finish_optimization_passes): Call print_combine_total_stats
	inside of pass_combine_1 dump rather than pass_profile_1.

2019-01-11  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (PTX_CTA_NUM_BARRIERS, PTX_PER_CTA_BARRIER)
	(PTX_NUM_PER_CTA_BARRIER, PTX_FIRST_PER_WORKER_BARRIER)
	(PTX_NUM_PER_WORKER_BARRIERS): Define.
	(nvptx_apply_dim_limits): Prevent vector_length 64 and
	num_workers 16.

2019-01-11  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (PTX_CTA_SIZE): Move up.

2019-01-11  Jan Beulich  <jbeulich@suse.com>

	* config/i386/i386.md (rex64suffix): Add L suffix for SI.
	* config/i386/sse.md (cvtusi2<ssescalarmodesuffix>32<round_name>,
	sse2_cvtsi2sd): Add {l}.
	(sse2_cvtsi2sdq<round_name>): Make q conditional upon AT&T
	syntax.

2019-01-10  Jakub Jelinek  <jakub@redhat.com>

	PR target/88785
	* config/i386/sse.md (float<floatunssuffix>v2div2sf2): Turn into
	define_expand.
	(*float<floatunssuffix>v2div2sf2): New define_insn.
	(float<floatunssuffix>v2div2sf2_mask): Turn into define_expand.
	(*float<floatunssuffix>v2div2sf2_mask): New define_insn.
	(*float<floatunssuffix>v2div2sf2_mask_1): Replace
	subrtxes (const_vector:V2SF [(const_int 0) (const_int 0)]) with
	match_operands with "const0_operand" "C".

2019-01-10  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64-builtins.c
	(aarch64_init_builtins): Move aarch64_init_fcmla_laneq_builtins...
	(aarch64_init_simd_builtins): ...Here

2019-01-10  Vladimir Makarov  <vmakarov@redhat.com>

	PR rtl-optimization/87305
	* lra-assigns.c
	(setup_live_pseudos_and_spill_after_risky_transforms): Check
	allocation for big endian pseudos used as paradoxical subregs and
	spill them if it is wrong.
	* lra-constraints.c (lra_constraints): Add a comment.

2019-01-10  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88792
	* tree-ssa-pre.c (get_representative_for): Do not return a
	value-number here.

2019-01-10  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/84877
	PR bootstrap/88450
	* function.c (assign_stack_local_1): Revert the 2018-11-21 changes.
	(assign_parm_setup_block): Do the argument slot realignment here
	instead.

2019-01-10  Stefan Agner  <stefan@agner.ch>

	PR target/88648
	* config/arm/arm.c (arm_option_override_internal): Force
	opts->x_inline_asm_unified to true only if TARGET_THUMB2_P.

2019-01-10  Jakub Jelinek  <jakub@redhat.com>

	PR c/88568
	* attribs.c (handle_dll_attribute): Clear TREE_STATIC after setting
	DECL_EXTERNAL.

2019-01-10  Tamar Christina  <tamar.christina@arm.com>

	* config/arm/arm-builtins.c
	(enum arm_type_qualifiers): Add qualifier_lane_pair_index.
	(MAC_LANE_PAIR_QUALIFIERS): New.
	(arm_expand_builtin_args): Use it.
	(arm_expand_builtin_1): Likewise.
	* config/arm/arm-protos.h (neon_vcmla_lane_prepare_operands): New.
	* config/arm/arm.c (neon_vcmla_lane_prepare_operands): New.
	* config/arm/arm-c.c (arm_cpu_builtins): Add __ARM_FEATURE_COMPLEX.
	* config/arm/arm_neon.h:
	(vcadd_rot90_f16): New.
	(vcaddq_rot90_f16): New.
	(vcadd_rot270_f16): New.
	(vcaddq_rot270_f16): New.
	(vcmla_f16): New.
	(vcmlaq_f16): New.
	(vcmla_lane_f16): New.
	(vcmla_laneq_f16): New.
	(vcmlaq_lane_f16): New.
	(vcmlaq_laneq_f16): New.
	(vcmla_rot90_f16): New.
	(vcmlaq_rot90_f16): New.
	(vcmla_rot90_lane_f16): New.
	(vcmla_rot90_laneq_f16): New.
	(vcmlaq_rot90_lane_f16): New.
	(vcmlaq_rot90_laneq_f16): New.
	(vcmla_rot180_f16): New.
	(vcmlaq_rot180_f16): New.
	(vcmla_rot180_lane_f16): New.
	(vcmla_rot180_laneq_f16): New.
	(vcmlaq_rot180_lane_f16): New.
	(vcmlaq_rot180_laneq_f16): New.
	(vcmla_rot270_f16): New.
	(vcmlaq_rot270_f16): New.
	(vcmla_rot270_lane_f16): New.
	(vcmla_rot270_laneq_f16): New.
	(vcmlaq_rot270_lane_f16): New.
	(vcmlaq_rot270_laneq_f16): New.
	(vcadd_rot90_f32): New.
	(vcaddq_rot90_f32): New.
	(vcadd_rot270_f32): New.
	(vcaddq_rot270_f32): New.
	(vcmla_f32): New.
	(vcmlaq_f32): New.
	(vcmla_lane_f32): New.
	(vcmla_laneq_f32): New.
	(vcmlaq_lane_f32): New.
	(vcmlaq_laneq_f32): New.
	(vcmla_rot90_f32): New.
	(vcmlaq_rot90_f32): New.
	(vcmla_rot90_lane_f32): New.
	(vcmla_rot90_laneq_f32): New.
	(vcmlaq_rot90_lane_f32): New.
	(vcmlaq_rot90_laneq_f32): New.
	(vcmla_rot180_f32): New.
	(vcmlaq_rot180_f32): New.
	(vcmla_rot180_lane_f32): New.
	(vcmla_rot180_laneq_f32): New.
	(vcmlaq_rot180_lane_f32): New.
	(vcmlaq_rot180_laneq_f32): New.
	(vcmla_rot270_f32): New.
	(vcmlaq_rot270_f32): New.
	(vcmla_rot270_lane_f32): New.
	(vcmla_rot270_laneq_f32): New.
	(vcmlaq_rot270_lane_f32): New.
	(vcmlaq_rot270_laneq_f32): New.
	* config/arm/arm_neon_builtins.def (vcadd90, vcadd270, vcmla0, vcmla90,
	vcmla180, vcmla270, vcmla_lane0, vcmla_lane90, vcmla_lane180,
	vcmla_lane270, vcmla_laneq0, vcmla_laneq90, vcmla_laneq180,
	vcmla_laneq270, vcmlaq_lane0, vcmlaq_lane90, vcmlaq_lane180,
	vcmlaq_lane270): New.
	* config/arm/neon.md (neon_vcmla_lane<rot><mode>,
	neon_vcmla_laneq<rot><mode>, neon_vcmlaq_lane<rot><mode>): New.
	* config/arm/arm.c (arm_arch8_3, arm_arch8_4): New.
	* config/arm/arm.h (TARGET_COMPLEX, arm_arch8_3, arm_arch8_4): New.
	(arm_option_reconfigure_globals): Use them.
	* config/arm/iterators.md (VDF, VQ_HSF): New.
	(VCADD, VCMLA): New.
	(VF_constraint, rot, rotsplit1, rotsplit2): Add V4HF and V8HF.
	* config/arm/neon.md (neon_vcadd<rot><mode>, neon_vcmla<rot><mode>):
	New.
	* config/arm/unspecs.md (UNSPEC_VCADD90, UNSPEC_VCADD270,
	UNSPEC_VCMLA, UNSPEC_VCMLA90, UNSPEC_VCMLA180, UNSPEC_VCMLA270): New.

2019-01-10  Tamar Christina  <tamar.christina@arm.com>

	* config/aarch64/aarch64-builtins.c (enum aarch64_type_qualifiers):
	Add qualifier_lane_pair_index.
	(emit-rtl.h): Include.
	(TYPES_QUADOP_LANE_PAIR): New.
	(aarch64_simd_expand_args): Use it.
	(aarch64_simd_expand_builtin): Likewise.
	(AARCH64_SIMD_FCMLA_LANEQ_BUILTINS, aarch64_fcmla_laneq_builtin_datum):
	New.
	(FCMLA_LANEQ_BUILTIN, AARCH64_SIMD_FCMLA_LANEQ_BUILTIN_BASE,
	AARCH64_SIMD_FCMLA_LANEQ_BUILTINS, aarch64_fcmla_lane_builtin_data,
	aarch64_init_fcmla_laneq_builtins, aarch64_expand_fcmla_builtin): New.
	(aarch64_init_builtins): Add aarch64_init_fcmla_laneq_builtins.
	(aarch64_expand_buildin): Add AARCH64_SIMD_BUILTIN_FCMLA_LANEQ0_V2SF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ90_V2SF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ180_V2SF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ2700_V2SF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ0_V4HF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ90_V4HF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ180_V4HF,
	AARCH64_SIMD_BUILTIN_FCMLA_LANEQ270_V4HF.
	* config/aarch64/iterators.md (FCMLA_maybe_lane): New.
	* config/aarch64/aarch64-c.c (aarch64_update_cpp_builtins):
	Add __ARM_FEATURE_COMPLEX.
	* config/aarch64/aarch64-simd-builtins.def (fcadd90, fcadd270, fcmla0,
	fcmla90, fcmla180, fcmla270, fcmla_lane0, fcmla_lane90, fcmla_lane180,
	fcmla_lane270, fcmla_laneq0, fcmla_laneq90, fcmla_laneq180,
	fcmla_laneq270, fcmlaq_lane0, fcmlaq_lane90, fcmlaq_lane180,
	fcmlaq_lane270): New.
	* config/aarch64/aarch64-simd.md (aarch64_fcmla_lane<rot><mode>,
	aarch64_fcmla_laneq<rot>v4hf, aarch64_fcmlaq_lane<rot><mode>,
	aarch64_fcadd<rot><mode>, aarch64_fcmla<rot><mode>): New.
	* config/aarch64/arm_neon.h:
	(vcadd_rot90_f16): New.
	(vcaddq_rot90_f16): New.
	(vcadd_rot270_f16): New.
	(vcaddq_rot270_f16): New.
	(vcmla_f16): New.
	(vcmlaq_f16): New.
	(vcmla_lane_f16): New.
	(vcmla_laneq_f16): New.
	(vcmlaq_lane_f16): New.
	(vcmlaq_rot90_lane_f16): New.
	(vcmla_rot90_laneq_f16): New.
	(vcmla_rot90_lane_f16): New.
	(vcmlaq_rot90_f16): New.
	(vcmla_rot90_f16): New.
	(vcmlaq_laneq_f16): New.
	(vcmla_rot180_laneq_f16): New.
	(vcmla_rot180_lane_f16): New.
	(vcmlaq_rot180_f16): New.
	(vcmla_rot180_f16): New.
	(vcmlaq_rot90_laneq_f16): New.
	(vcmlaq_rot270_laneq_f16): New.
	(vcmlaq_rot270_lane_f16): New.
	(vcmla_rot270_laneq_f16): New.
	(vcmlaq_rot270_f16): New.
	(vcmla_rot270_f16): New.
	(vcmlaq_rot180_laneq_f16): New.
	(vcmlaq_rot180_lane_f16): New.
	(vcmla_rot270_lane_f16): New.
	(vcadd_rot90_f32): New.
	(vcaddq_rot90_f32): New.
	(vcaddq_rot90_f64): New.
	(vcadd_rot270_f32): New.
	(vcaddq_rot270_f32): New.
	(vcaddq_rot270_f64): New.
	(vcmla_f32): New.
	(vcmlaq_f32): New.
	(vcmlaq_f64): New.
	(vcmla_lane_f32): New.
	(vcmla_laneq_f32): New.
	(vcmlaq_lane_f32): New.
	(vcmlaq_laneq_f32): New.
	(vcmla_rot90_f32): New.
	(vcmlaq_rot90_f32): New.
	(vcmlaq_rot90_f64): New.
	(vcmla_rot90_lane_f32): New.
	(vcmla_rot90_laneq_f32): New.
	(vcmlaq_rot90_lane_f32): New.
	(vcmlaq_rot90_laneq_f32): New.
	(vcmla_rot180_f32): New.
	(vcmlaq_rot180_f32): New.
	(vcmlaq_rot180_f64): New.
	(vcmla_rot180_lane_f32): New.
	(vcmla_rot180_laneq_f32): New.
	(vcmlaq_rot180_lane_f32): New.
	(vcmlaq_rot180_laneq_f32): New.
	(vcmla_rot270_f32): New.
	(vcmlaq_rot270_f32): New.
	(vcmlaq_rot270_f64): New.
	(vcmla_rot270_lane_f32): New.
	(vcmla_rot270_laneq_f32): New.
	(vcmlaq_rot270_lane_f32): New.
	(vcmlaq_rot270_laneq_f32): New.
	* config/aarch64/aarch64.h (TARGET_COMPLEX): New.
	* config/aarch64/iterators.md (UNSPEC_FCADD90, UNSPEC_FCADD270,
	UNSPEC_FCMLA, UNSPEC_FCMLA90, UNSPEC_FCMLA180, UNSPEC_FCMLA270): New.
	(FCADD, FCMLA): New.
	(rot): New.
	* config/arm/types.md (neon_fcadd, neon_fcmla): New.

2019-01-09  Sandra Loosemore  <sandra@codesourcery.com>

	PR other/16615

	* config/pa/pa.c: Change "can not" to "cannot".
	* gimple-ssa-evrp-analyze.c: Likewise.
	* ipa-icf.c: Likewise.
	* ipa-polymorphic-call.c: Likewise.
	* ipa-pure-const.c: Likewise.
	* lra-constraints.c: Likewise.
	* lra-remat.c: Likewise.
	* reload1.c: Likewise.
	* reorg.c: Likewise.
	* tree-ssa-uninit.c: Likewise.

2019-01-09  Sandra Loosemore  <sandra@codesourcery.com>

	PR other/16615

	* Makefile.in: Mechanically replace "can not" with "cannot".
	* alias.c: Likewise.
	* builtins.c: Likewise.
	* calls.c: Likewise.
	* cgraph.c: Likewise.
	* cgraph.h: Likewise.
	* cgraphclones.c: Likewise.
	* cgraphunit.c: Likewise.
	* combine-stack-adj.c: Likewise.
	* combine.c: Likewise.
	* common/config/i386/i386-common.c: Likewise.
	* config/aarch64/aarch64.c: Likewise.
	* config/alpha/sync.md: Likewise.
	* config/arc/arc.c: Likewise.
	* config/arc/predicates.md: Likewise.
	* config/arm/arm-c.c: Likewise.
	* config/arm/arm.c: Likewise.
	* config/arm/arm.h: Likewise.
	* config/arm/arm.md: Likewise.
	* config/arm/cortex-r4f.md: Likewise.
	* config/csky/csky.c: Likewise.
	* config/csky/csky.h: Likewise.
	* config/darwin-f.c: Likewise.
	* config/epiphany/epiphany.md: Likewise.
	* config/i386/i386.c: Likewise.
	* config/i386/sol2.h: Likewise.
	* config/m68k/m68k.c: Likewise.
	* config/mcore/mcore.h: Likewise.
	* config/microblaze/microblaze.md: Likewise.
	* config/mips/20kc.md: Likewise.
	* config/mips/sb1.md: Likewise.
	* config/nds32/nds32.c: Likewise.
	* config/nds32/predicates.md: Likewise.
	* config/pa/pa.c: Likewise.
	* config/rs6000/e300c2c3.md: Likewise.
	* config/rs6000/rs6000.c: Likewise.
	* config/s390/s390.h: Likewise.
	* config/sh/sh.c: Likewise.
	* config/sh/sh.md: Likewise.
	* config/spu/vmx2spu.h: Likewise.
	* cprop.c: Likewise.
	* dbxout.c: Likewise.
	* df-scan.c: Likewise.
	* doc/cfg.texi: Likewise.
	* doc/extend.texi: Likewise.
	* doc/fragments.texi: Likewise.
	* doc/gty.texi: Likewise.
	* doc/invoke.texi: Likewise.
	* doc/lto.texi: Likewise.
	* doc/md.texi: Likewise.
	* doc/objc.texi: Likewise.
	* doc/rtl.texi: Likewise.
	* doc/tm.texi: Likewise.
	* dse.c: Likewise.
	* emit-rtl.c: Likewise.
	* emit-rtl.h: Likewise.
	* except.c: Likewise.
	* expmed.c: Likewise.
	* expr.c: Likewise.
	* fold-const.c: Likewise.
	* genautomata.c: Likewise.
	* gimple-fold.c: Likewise.
	* hard-reg-set.h: Likewise.
	* ifcvt.c: Likewise.
	* ipa-comdats.c: Likewise.
	* ipa-cp.c: Likewise.
	* ipa-devirt.c: Likewise.
	* ipa-fnsummary.c: Likewise.
	* ipa-icf.c: Likewise.
	* ipa-inline-transform.c: Likewise.
	* ipa-inline.c: Likewise.
	* ipa-polymorphic-call.c: Likewise.
	* ipa-profile.c: Likewise.
	* ipa-prop.c: Likewise.
	* ipa-pure-const.c: Likewise.
	* ipa-reference.c: Likewise.
	* ipa-split.c: Likewise.
	* ipa-visibility.c: Likewise.
	* ipa.c: Likewise.
	* ira-build.c: Likewise.
	* ira-color.c: Likewise.
	* ira-conflicts.c: Likewise.
	* ira-costs.c: Likewise.
	* ira-int.h: Likewise.
	* ira-lives.c: Likewise.
	* ira.c: Likewise.
	* ira.h: Likewise.
	* loop-invariant.c: Likewise.
	* loop-unroll.c: Likewise.
	* lower-subreg.c: Likewise.
	* lra-assigns.c: Likewise.
	* lra-constraints.c: Likewise.
	* lra-eliminations.c: Likewise.
	* lra-lives.c: Likewise.
	* lra-remat.c: Likewise.
	* lra-spills.c: Likewise.
	* lra.c: Likewise.
	* lto-cgraph.c: Likewise.
	* lto-streamer-out.c: Likewise.
	* postreload-gcse.c: Likewise.
	* predict.c: Likewise.
	* profile-count.h: Likewise.
	* profile.c: Likewise.
	* recog.c: Likewise.
	* ree.c: Likewise.
	* reload.c: Likewise.
	* reload1.c: Likewise.
	* reorg.c: Likewise.
	* resource.c: Likewise.
	* rtl.def: Likewise.
	* rtl.h: Likewise.
	* rtlanal.c: Likewise.
	* sched-deps.c: Likewise.
	* sched-ebb.c: Likewise.
	* sched-rgn.c: Likewise.
	* sel-sched-ir.c: Likewise.
	* sel-sched.c: Likewise.
	* shrink-wrap.c: Likewise.
	* simplify-rtx.c: Likewise.
	* symtab.c: Likewise.
	* target.def: Likewise.
	* toplev.c: Likewise.
	* tree-call-cdce.c: Likewise.
	* tree-cfg.c: Likewise.
	* tree-complex.c: Likewise.
	* tree-core.h: Likewise.
	* tree-eh.c: Likewise.
	* tree-inline.c: Likewise.
	* tree-loop-distribution.c: Likewise.
	* tree-nrv.c: Likewise.
	* tree-profile.c: Likewise.
	* tree-sra.c: Likewise.
	* tree-ssa-alias.c: Likewise.
	* tree-ssa-dce.c: Likewise.
	* tree-ssa-dom.c: Likewise.
	* tree-ssa-forwprop.c: Likewise.
	* tree-ssa-loop-im.c: Likewise.
	* tree-ssa-loop-ivcanon.c: Likewise.
	* tree-ssa-loop-ivopts.c: Likewise.
	* tree-ssa-loop-niter.c: Likewise.
	* tree-ssa-phionlycprop.c: Likewise.
	* tree-ssa-phiopt.c: Likewise.
	* tree-ssa-propagate.c: Likewise.
	* tree-ssa-threadedge.c: Likewise.
	* tree-ssa-threadupdate.c: Likewise.
	* tree-ssa-uninit.c: Likewise.
	* tree-ssanames.c: Likewise.
	* tree-streamer-out.c: Likewise.
	* tree.c: Likewise.
	* tree.h: Likewise.
	* vr-values.c: Likewise.

2019-01-09  Uroš Bizjak  <ubizjak@gmail.com>

	* config/i386/i386-protos.h (ix86_expand_xorsign): New prototype.
	(ix86_split_xorsign): Ditto.
	* config/i386/i386.c (ix86_expand_xorsign): New function.
	(ix86_split_xorsign): Ditto.
	* config/i386/i386.md (UNSPEC_XORSIGN): New unspec.
	(xorsign<mode>3): New expander.
	(xorsign<mode>3_1): New insn_and_split pattern.
	* config/i386/sse.md (xorsign<mode>3): New expander.

2019-01-09  Eric Botcazou  <ebotcazou@adacore.com>

	* config/sparc/sparc.md (*tablejump_sp32): Merge into...
	(*tablejump_sp64): Likewise.
	(*tablejump<P:mode>): ...this.
	(*call_address_sp32): Merge into...
	(*call_address_sp64): Likewise.
	(*call_address<P:mode>): ...this.
	(*call_symbolic_sp32): Merge into...
	(*call_symbolic_sp64): Likewise.
	(*call_symbolic<P:mode>): ...this.
	(call_value): Remove constraint and add predicate.
	(*call_value_address_sp32): Merge into...
	(*call_value_address_sp64): Likewise.
	(*call_value_address<P:mode>): ...this.
	(*call_value_symbolic_sp32): Merge into...
	(*call_value_symbolic_sp64): Likewise.
	(*call_value_symbolic<P:mode>): ...this.
	(*sibcall_symbolic_sp32): Merge into...
	(*sibcall_symbolic_sp64): Likewise.
	(*sibcall_symbolic<P:mode>): ...this.
	(sibcall_value): Remove constraint and add predicate.
	(*sibcall_value_symbolic_sp32): Merge into...
	(*sibcall_value_symbolic_sp64): Likewise.
	(*sibcall_value_symbolic<P:mode>): ...this.
	(window_save): Minor tweak.
	(*branch_sp32): Merge into...
	(*branch_sp64): Likewise.
	(*branch<P:mode>): ...this.

2019-01-09  Eric Botcazou  <ebotcazou@adacore.com>
	    James Clarke  <jrtc27@jrtc27.com>

	PR target/84010
	* config/sparc/sparc.c (sparc_legitimize_tls_address): Only use Pmode
	consistently in TLS address generation and adjust code to the renaming
	of patterns.  Mark calls to __tls_get_addr as const.
	* config/sparc/sparc.md (tgd_hi22): Turn into...
	(tgd_hi22<P:mode>): ...this and use Pmode throughout.
	(tgd_lo10): Turn into...
	(tgd_lo10<P:mode>): ...this and use Pmode throughout.
	(tgd_add32): Merge into...
	(tgd_add64): Likewise.
	(tgd_add<P:mode>): ...this and use Pmode throughout.
	(tldm_hi22): Turn into...
	(tldm_hi22<P:mode>): ...this and use Pmode throughout.
	(tldm_lo10): Turn into...
	(tldm_lo10<P:mode>): ...this and use Pmode throughout.
	(tldm_add32): Merge into...
	(tldm_add64): Likewise.
	(tldm_add<P:mode>): ...this and use Pmode throughout.
	(tldm_call32): Merge into...
	(tldm_call64): Likewise.
	(tldm_call<P:mode>): ...this and use Pmode throughout.
	(tldo_hix22): Turn into...
	(tldo_hix22<P:mode>): ...this and use Pmode throughout.
	(tldo_lox10): Turn into...
	(tldo_lox10<P:mode>): ...this and use Pmode throughout.
	(tldo_add32): Merge into...
	(tldo_add64): Likewise.
	(tldo_add<P:mode>): ...this and use Pmode throughout.
	(tie_hi22): Turn into...
	(tie_hi22<P:mode>): ...this and use Pmode throughout.
	(tie_lo10): Turn into...
	(tie_lo10<P:mode>): ...this and use Pmode throughout.
	(tie_ld64): Use DImode throughout.
	(tie_add32): Merge into...
	(tie_add64): Likewise.
	(tie_add<P:mode>): ...this and use Pmode throughout.
	(tle_hix22_sp32): Merge into...
	(tle_hix22_sp64): Likewise.
	(tle_hix22<P:mode>): ...this and use Pmode throughout.
	(tle_lox22_sp32): Merge into...
	(tle_lox22_sp64): Likewise.
	(tle_lox22<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldub_sp32): Merge into...
	(*tldo_ldub_sp64): Likewise.
	(*tldo_ldub<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldub1_sp32): Merge into...
	(*tldo_ldub1_sp64): Likewise.
	(*tldo_ldub1<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldub2_sp32): Merge into...
	(*tldo_ldub2_sp64): Likewise.
	(*tldo_ldub2<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldsb1_sp32): Merge into...
	(*tldo_ldsb1_sp64): Likewise.
	(*tldo_ldsb1<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldsb2_sp32): Merge into...
	(*tldo_ldsb2_sp64): Likewise.
	(*tldo_ldsb2<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldub3_sp64): Use DImode throughout.
	(*tldo_ldsb3_sp64): Likewise.
	(*tldo_lduh_sp32): Merge into...
	(*tldo_lduh_sp64): Likewise.
	(*tldo_lduh<P:mode>): ...this and use Pmode throughout.
	(*tldo_lduh1_sp32): Merge into...
	(*tldo_lduh1_sp64): Likewise.
	(*tldo_lduh1<P:mode>): ...this and use Pmode throughout.
	(*tldo_ldsh1_sp32): Merge into...
	(*tldo_ldsh1_sp64): Likewise.
	(*tldo_ldsh1<P:mode>): ...this and use Pmode throughout.
	(*tldo_lduh2_sp64): Use DImode throughout.
	(*tldo_ldsh2_sp64): Likewise.
	(*tldo_lduw_sp32): Merge into...
	(*tldo_lduw_sp64): Likewise.
	(*tldo_lduw<P:mode>): ...this and use Pmode throughout.
	(*tldo_lduw1_sp64): Use DImode throughout.
	(*tldo_ldsw1_sp64): Likewise.
	(*tldo_ldx_sp64): Likewise.
	(*tldo_stb_sp32): Merge into...
	(*tldo_stb_sp64): Likewise.
	(*tldo_stb<P:mode>): ...this and use Pmode throughout.
	(*tldo_sth_sp32): Merge into...
	(*tldo_sth_sp64): Likewise.
	(*tldo_sth<P:mode>): ...this and use Pmode throughout.
	(*tldo_stw_sp32): Merge into...
	(*tldo_stw_sp64): Likewise.
	(*tldo_stw<P:mode>): ...this and use Pmode throughout.
	(*tldo_stx_sp64): Use DImode throughout.

2018-01-09  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64.c (aarch64_override_options): Add case to
	check configure option to set BTI and Return Address Signing.
	* configure.ac: Add --enable-standard-branch-protection and
	--disable-standard-branch-protection.
	* configure: Regenerated.
	* doc/install.texi: Document the same.

2018-01-09  Sudakshina Das  <sudi.das@arm.com>
	    Ramana Radhakrishnan  <ramana.radhakrishnan@arm.com>

	* config.gcc (aarch64*-*-*): Add aarch64-bti-insert.o.
	* config/aarch64/aarch64.h: Update comment for TRAMPOLINE_SIZE.
	* config/aarch64/aarch64.c (aarch64_asm_trampoline_template): Update
	if bti is enabled.
	* config/aarch64/aarch64-bti-insert.c: New file.
	* config/aarch64/aarch64-passes.def (INSERT_PASS_BEFORE): Insert bti
	pass.
	* config/aarch64/aarch64-protos.h (make_pass_insert_bti): Declare the
	new bti pass.
	* config/aarch64/aarch64.md (unspecv): Add UNSPECV_BTI_NOARG,
	UNSPECV_BTI_C, UNSPECV_BTI_J and UNSPECV_BTI_JC.
	(bti_noarg, bti_j, bti_c, bti_jc): New define_insns.
	* config/aarch64/t-aarch64: Add rule for aarch64-bti-insert.o.

2018-01-09  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64-protos.h (aarch64_bti_enabled): Declare.
	* config/aarch64/aarch64.c (aarch64_handle_no_branch_protection):
	Disable bti for -mbranch-protection=none.
	(aarch64_handle_standard_branch_protection): Enable bti for
	-mbranch-protection=standard.
	(aarch64_handle_bti_protection): Enable bti for "bti" in the string to
	-mbranch-protection.
	(aarch64_bti_enabled): Check if bti is enabled.
	* config/aarch64/aarch64.opt: Declare target variable.
	* doc/invoke.texi: Add bti to the -mbranch-protection documentation.

2018-01-09  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64.c (aarch64_expand_prologue): Use new
	epilogue/prologue scratch registers EP0_REGNUM and EP1_REGNUM.
	(aarch64_expand_epilogue): Likewise.
	(aarch64_output_mi_thunk): Likewise.
	* config/aarch64/aarch64.h (REG_CLASS_CONTENTS): Change
	TAILCALL_ADDR_REGS to x16 and x17.
	* config/aarch64/aarch64.md: Define EP0_REGNUM and EP1_REGNUM.

2018-01-09  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64-option-extensions.def: Define
	AARCH64_OPT_EXTENSION for memtag, rng, sb, ssbs and predres.
	* config/aarch64/aarch64.h (AARCH64_FL_RNG): New.
	(AARCH64_FL_MEMTAG, ARCH64_FL_SB, AARCH64_FL_SSBS): New.
	(AARCH64_FL_PREDRES): New.
	(AARCH64_FL_FOR_ARCH8_5): Add AARCH64_FL_SB, AARCH64_FL_SSBS and
	AARCH64_FL_PREDRES by default.
	* doc/invoke.texi: Document rng, memtag, sb, ssbs and predres.

2018-01-09  Sudakshina Das  <sudi.das@arm.com>

	* config/aarch64/aarch64-arches.def: Define AARCH64_ARCH for
	ARMv8.5-A.
	* config/aarch64/aarch64.h (AARCH64_FL_V8_5): New.
	(AARCH64_FL_FOR_ARCH8_5, AARCH64_ISA_V8_5): New.
	* doc/invoke.texi: Document ARMv8.5-A.

2019-01-09  Alejandro Martinez  <alejandro.martinezvicente@arm.com>

	* config/aarch64/aarch64-sve.md (copysign<mode>3): New define_expand.
	(xorsign<mode>3): Likewise.

2019-01-09  Jelinek  <jakub@redhat.com>

	PR middle-end/88758
	* tree.c (initializer_each_zero_or_onep) <case VECTOR_CST>: Use
	vector_cst_elt instead of VECTOR_CST_ENCODED_ELT.

	PR rtl-optimization/88331
	* function.c (assign_stack_local_1): Don't set dynamic_align_addr if
	not currently_expanding_to_rtl.

2019-01-09  Eric Botcazou  <ebotcazou@adacore.com>

	* doc/invoke.texi (-Os): Remove trailing spaces.
	(-finline-functions): Remove reference to -O2.

2019-01-08  Jakub Jelinek  <jakub@redhat.com>

	PR rtl-optimization/79593
	* config/i386/i386.md (reg = mem; mem = reg): New define_peephole2.

	* config/rs6000/rs6000.c (rs6000_delegitimize_address): Delegitimize
	UNSPEC_FUSION_GPR to its argument.  Formatting fixes.

2019-01-08  Eric Botcazou  <ebotcazou@adacore.com>

	PR bootstrap/88721
	* config/sparc/sparc.c (function_arg_slotno): Set *PPREGNO & *PPADDING
	to -1 on entry.

	PR debug/88723
	* config/sparc/sparc.c (sparc_delegitimize_address): Deal with naked
	UNSPECs and UNSPEC_MOVE_GOTDATA specifically.

2019-01-08  H.J. Lu  <hongjiu.lu@intel.com>

	PR target/88717
	* config/i386/i386.c (ix86_avx_u128_mode_exit): Call
	ix86_avx_u128_mode_entry.

2019-01-08  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/88753
	* tree-switch-conversion.c (switch_conversion::build_one_array):
	Come up with local variable constructor.  Convert first to
	type of constructor values.

2019-01-08  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/86554
	* tree-ssa-sccvn.c (eliminate_dom_walker, rpo_elim,
	rpo_avail): Move earlier.
	(visit_nary_op): When value-numbering to expressions
	with different overflow behavior make sure there's an
	available expression on the path.

2019-01-08  Sam Tebbs  <sam.tebbs@arm.com>

	* config/aarch64/aarch64.c (BRANCH_PROTECT_STR_MAX,
	aarch64_parse_branch_protection,
	struct aarch64_branch_protect_type,
	aarch64_handle_no_branch_protection,
	aarch64_handle_standard_branch_protection,
	aarch64_validate_mbranch_protection,
	aarch64_handle_pac_ret_protection,
	aarch64_handle_attr_branch_protection,
	accepted_branch_protection_string,
	aarch64_pac_ret_subtypes,
	aarch64_branch_protect_types,
	aarch64_handle_pac_ret_leaf): Define.
	(aarch64_override_options_after_change_1, aarch64_override_options):
	Add check for accepted_branch_protection_string.
	(aarch64_option_save): Save accepted_branch_protection_string.
	(aarch64_option_restore): Save accepted_branch_protection_string.
	* config/aarch64/aarch64.c (aarch64_attributes): Add branch-protection.
	* config/aarch64/aarch64.opt: Add mbranch-protection. Deprecate
	msign-return-address.
	* doc/invoke.texi: Add mbranch-protection.

2019-01-08  Alan Modra  <amodra@gmail.com>

	PR target/88614
	* genattrtab.c (max_attr_value, min_attr_value, or_attr_value):
	Delete "unknownp" parameter.  Adjust callers.  Handle
	CONST_INT, PLUS, MINUS, and MULT.
	(attr_value_aligned): Renamed from or_attr_value.
	(min_attr_value): Return INT_MIN for unhandled rtl case..
	(min_fn): ..and translate to INT_MAX here.
	(write_length_unit_log): Modify to cope without "unknown".
	(write_attr_value): Handle IF_THEN_ELSE.

2019-01-07  Richard Sandiford  <richard.sandiford@arm.com>

	* tree-vect-stmts.c (vectorizable_store): Don't use the dataref_offset
	optimization for masked stores.

2019-01-07  Richard Sandiford  <richard.sandiford@arm.com>

	PR middle-end/88567
	* tree-vect-loop.c (get_initial_defs_for_reduction): Pass the
	output vector directly to duplicate_and_interleave instead of
	going through a temporary.  Postpone insertion of ctor_seq to
	the end of the loop.

2019-01-07  Richard Earnshaw  <rearnsha@arm.com>

	PR target/86891
	* config/aarch64/aarch64.c (aarch64_expand_subvti): New parameter
	unsigned_p.  Handle signed and unsigned overflow correction as
	required.
	* config/aarch64/aarch64-protos.h (aarch64_expand_subvti): Update
	prototype.
	* config/aarch64/aarch64.md (addv<mode>4): Use aarch64_plus_operand
	for operand 2.
	(add<mode>3_compareV_imm): Make this callable for expanding.
	(subv<GPI:mode>4): Use register_operand for operand 1.  Use
	aarch64_plus_operand for operand 2.
	(subv<GPI:mode>_insn): New insn pattern.
	(subv<GPI:mode>_imm): Likewise.
	(negv<GPI:mode>3): New expand pattern.
	(negv<GPI:mode>_insn): New insn pattern.
	(negv<GPI:mode>_cmp_only): Likewise.
	(cmpv<GPI:mode>_insn): Likewise.
	(subvti4): Use register_operand for operand 1.  Update call to
	aarch64_expand_subvti.
	(usubvti4): Likewise.
	(negvti3): New expand pattern.
	(negdi_carryout): New insn pattern.
	(negvdi_carryinV): New insn pattern.
	(sub<mode3>_compare1_imm): Delete named insn pattern, make anonymous
	version the named version.
	(peepholes to convert to sub<mode3>_compare1_imm): Adjust order of
	operands.
	(usub<GPI:mode>3_carryinC, usub<GPI:mode>3_carryinC_z1): New insn
	patterns.
	(usub<GPI:mode>3_carryinC_z2, usub<GPI:mode>3_carryinC): New insn
	patterns.
	(sub<mode>3_carryinCV, sub<mode>3_carryinCV_z1_z2): Delete.
	(sub<mode>3_carryinCV_z1, sub<mode>3_carryinCV_z2): Delete.
	(sub<mode>3_carryinCV): Delete.
	(sub<GPI:mode>3_carryinV): New expand pattern.
	sub<mode>3_carryinV, sub<mode>3_carryinV_z2): New insn patterns.

2019-01-07  Richard Biener  <rguenther@suse.de>

	* tree-ssa-uncprop.c (ssa_equip_hash_traits): Remove in favor
	of tree_operand_hash.

2019-01-07  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/88598
	* tree.h (single_nonzero_element): Declare.
	* tree.c (single_nonzero_element): New function.
	* match.pd: Fold certain reductions of X & CST to X[I] & CST[I]
	if I is the only nonzero element of CST.

2019-01-07  Richard Sandiford  <richard.sandiford@arm.com>

	PR tree-optimization/88598
	* tree.h (initializer_each_zero_or_onep): Declare.
	* tree.c (initializer_each_zero_or_onep): New function.
	(signed_or_unsigned_type_for): Handle float types too.
	(unsigned_type_for, signed_type_for): Update comments accordingly.
	* match.pd: Fold x * { 0 or 1, 0 or 1, ...} to
	x & { 0 or -1, 0 or -1, ... }.

2019-01-07  Jonathan Wakely  <jwakely@redhat.com>

	* doc/install.texi: Replace references to x86_64-unknown-linux-gnu
	with x86_64-pc-linux-gnu.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	PR target/85486
	* config/nvptx/nvptx.c (has_vector_partitionable_routine_calls_p): New
	function.
	(nvptx_goacc_validate_dims): Force vl32 if calling vector-partitionable
	routines.

2019-01-07  Jakub Jelinek  <jakub@redhat.com>

	* config/i386/sse.md (vec_extract<mode><ssehalfvecmodelower>): Use
	V_256_512 iterator instead of V_512 and TARGET_AVX instead of
	TARGET_AVX512F as condition.

	PR debug/88723
	* dwarf2out.c (const_ok_for_output_1): Remove redundant call to
	const_not_ok_for_debug_p target hook.
	(mem_loc_descriptor) <case UNSPEC>: Only call const_ok_for_output_1
	on UNSPEC and subexpressions thereof if all subexpressions of the
	UNSPEC are CONSTANT_P.

	PR tree-optimization/88676
	* tree-ssa-phiopt.c (two_value_replacement): New function.
	(tree_ssa_phiopt_worker): Call it.

	PR sanitizer/88619
	* cfgexpand.c (expand_stack_vars): Only align prev_offset to
	ASAN_MIN_RED_ZONE_SIZE, not to maximum of that and alignb.

	PR c++/85052
	* tree-vect-generic.c: Include insn-config.h and recog.h.
	(expand_vector_piecewise): Add defaulted ret_type argument,
	if non-NULL, use that in preference to type for the result type.
	(expand_vector_parallel): Formatting fix.
	(do_vec_conversion, do_vec_narrowing_conversion,
	expand_vector_conversion): New functions.
	(expand_vector_operations_1): Call expand_vector_conversion
	for VEC_CONVERT ifn calls.
	* internal-fn.def (VEC_CONVERT): New internal function.
	* internal-fn.c (expand_VEC_CONVERT): New function.
	* fold-const-call.c (fold_const_vec_convert): New function.
	(fold_const_call): Use it for CFN_VEC_CONVERT.
	* doc/extend.texi (__builtin_convertvector): Document.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx-protos.h (nvptx_output_red_partition): Declare.
	* config/nvptx/nvptx.c (vector_red_size, vector_red_align,
	vector_red_partition, vector_red_sym): New global variables.
	(nvptx_option_override): Initialize vector_red_sym.
	(nvptx_declare_function_name): Restore red_partition register.
	(nvptx_file_end): Emit code to declare the vector reduction variables.
	(nvptx_output_red_partition): New function.
	(nvptx_expand_shared_addr): Add vector argument. Use it to handle
	large vector reductions.
	(enum nvptx_builtins): Add NVPTX_BUILTIN_VECTOR_ADDR.
	(nvptx_init_builtins): Add VECTOR_ADDR.
	(nvptx_expand_builtin): Update call to nvptx_expand_shared_addr.
	Handle nvptx_expand_shared_addr.
	(nvptx_get_shared_red_addr): Add vector argument and handle large
	vectors.
	(nvptx_goacc_reduction_setup): Add offload_attrs argument and handle
	large vectors.
	(nvptx_goacc_reduction_init): Likewise.
	(nvptx_goacc_reduction_fini): Likewise.
	(nvptx_goacc_reduction_teardown): Likewise.
	(nvptx_goacc_reduction): Update calls to nvptx_goacc_reduction_{setup,
	init,fini,teardown}.
	(nvptx_init_axis_predicate): Initialize vector_red_partition.
	(nvptx_set_current_function): Init vector_red_partition.
	* config/nvptx/nvptx.md (UNSPECV_RED_PART): New unspecv.
	(nvptx_red_partition): New insn.
	* config/nvptx/nvptx.h (struct machine_function): Add red_partition.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	PR target/85381
	* config/nvptx/nvptx.c (nvptx_process_pars): Don't emit barriers for
	empty loops.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (oacc_bcast_partition): Declare.
	(nvptx_option_override): Init oacc_bcast_partition.
	(nvptx_init_oacc_workers): New function.
	(nvptx_declare_function_name): Call nvptx_init_oacc_workers.
	(nvptx_needs_shared_bcast): New function.
	(nvptx_find_par): Generalize to enable vectors to use shared-memory
	to propagate state.
	(nvptx_shared_propagate): Initialize vector bcast partition and
	synchronization state.
	(nvptx_single): Generalize to enable vectors to use shared-memory
	to propagate state.
	(nvptx_process_pars): Likewise.
	(nvptx_set_current_function): Initialize oacc_broadcast_partition.
	* config/nvptx/nvptx.h (struct machine_function): Add
	bcast_partition and sync_bar members.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_welformed_vector_length_p)
	(nvptx_apply_dim_limits): New function.
	(nvptx_goacc_validate_dims_1): Allow PTX_MAX_VECTOR_LENGTH larger than
	PTX_WARP_SIZE.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): Move warnings to
	as late as possible.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (PTX_VECTOR_LENGTH): Remove.
	(PTX_DEFAULT_VECTOR_LENGTH, PTX_MAX_VECTOR_LENGTH): Define.
	(nvptx_goacc_validate_dims_1, nvptx_dim_limit)
	(nvptx_goacc_reduction_fini): Use PTX_DEFAULT_VECTOR_LENGTH,
	PTX_MAX_VECTOR_LENGTH and PTX_WARP_SIZE instead of PTX_VECTOR_LENGTH.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims): Add asserts.

2019-01-07  Tom de Vries  <tdevries@suse.de>

	* omp-offload.c (oacc_get_min_dim): New function.
	* omp-offload.h (oacc_get_min_dim): Declare.

2018-12-26  Mateusz B  <mateuszb@poczta.onet.pl>

	PR target/88521
	* config/i386/i386.c (function_value_ms_64): Return small sturct in
	AX_REG and float/double in FIRST_SSE_REG for 4 or 8 byte modes.

2019-01-05  Jan Hubicka  <hubicka@ucw.cz>

	PR tree-opt/86020
	Revert:
	2017-05-22  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-inline.c (edge_badness): Use inlined_time instead of
	inline_summaries->get.

2019-01-05  Jan Hubicka  <hubicka@ucw.cz>

	* opts.c (enable_fdo_optimizations): Enable
	version-loops-for-strides, loop-interchange, unrol-and-jam
	and tree-loop-distribution.
	* invoke.texi: Document newly enabled options.

2019-01-05  Jan Hubicka  <hubicka@ucw.cz>

	* doc/invoke.texi (max-inline-insns-small): New parameters.
	* ipa-inline.c (want_early_inline_function_p): simplify.
	(want_inline_small_function_p): Fix pasto from previous patch;
	use max-inline-insns-small bound.
	* params.def (max-inline-insns-small): New param.
	* ipa-fnsummary.c (analyze_function_body): Initialize time/size
	variables correctly.

2019-01-05  Jan Hubicka  <hubicka@ucw.cz>

	* doc/invoke.texi: Document max-inline-insns-size,
	uninlined-function-insns, uninlined-function-time,
	uninlined-thunk-insns and uninlined-thunk-time.
	* params.def: Add max-inline-insns-size,
	uninlined-function-insns, uninlined-function-time,
	uninlined-thunk-insns and uninlined-thunk-time.
	* ipa-fnsummary.c (compute_fn_summary, analyze_function_body): Use
	new parameters.
	* ipa-inline.c (can_inline_edge_by_limits_p,
	want_inline_small_function_p): Use new parameters.

2019-01-05  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-fnsummary.c (analyze_function_body): Fix accounting of time.

2019-01-05  Jakub Jelinek  <jakub@redhat.com>

	PR middle-end/82564
	PR target/88620
	* expr.c (expand_assignment): For calls returning VLA structures
	if to_rtx is not a MEM, force it into a stack temporary.

	PR debug/88635
	* dwarf2out.c (const_ok_for_output_1): Reject MINUS that contains
	SYMBOL_REF, CODE_LABEL or UNSPEC in subexpressions of second argument.
	Reject PLUS that contains SYMBOL_REF, CODE_LABEL or UNSPEC in
	subexpressions of both operands.
	(mem_loc_descriptor): Handle UNSPEC if target hook acks it and all the
	subrtxes are CONSTANT_P.
	* config/i386/i386.c (ix86_const_not_ok_for_debug_p): Revert
	2018-11-09 changes.

2019-01-04  Jan Hubicka  <hubicka@ucw.cz>

	* params.def (hot-bb-count-ws-permille): Set to 990.

2019-01-04  Martin Sebor  <msebor@redhat.com>

	PR c/88546
	* attribs.c (decls_mismatched_attributes): Avoid warning for attribute
	leaf.

2019-01-04  Martin Sebor  <msebor@redhat.com>

	PR c/88363
	* doc/extend.texi (attribute alloc_align, alloc_size): Update.

2019-01-04  Jakub Jelinek  <jakub@redhat.com>

	* gdbinit.in: Turn off pagination for the skip commands, restore
	it to previous state afterwards.

2019-01-04  Jakub Jelinek  <jakub@redhat.com>

	PR target/88594
	* config/i386/i386.c (ix86_expand_divmod_libfunc): Use mode instead
	of GET_MODE (opN) as modes of the libcall arguments.

2019-01-04  Jan Beulich  <jbeulich@suse.com>

	* config/i386/sse.md
	(<avx512>_cmp<mode>3<mask_scalar_merge_name><round_saeonly_name>,
	<avx512>_cmp<mode>3<mask_scalar_merge_name>,
	<avx512>_ucmp<mode>3<mask_scalar_merge_name>,
	<avx512>_ucmp<mode>3<mask_scalar_merge_name>,
	avx512f_vmcmp<mode>3<round_saeonly_name>,
	avx512f_vmcmp<mode>3_mask<round_saeonly_name>,
	avx512f_maskcmp<mode>3,
	<avx512>_cvt<ssemodesuffix>2mask<mode>,
	<avx512>_cvt<ssemodesuffix>2mask<mode>,
	*<avx512>_cvtmask2<ssemodesuffix><mode>,
	*<avx512>_cvtmask2<ssemodesuffix><mode>,
	<avx512>_eq<mode>3<mask_scalar_merge_name>_1,
	<avx512>_eq<mode>3<mask_scalar_merge_name>_1,
	<avx512>_gt<mode>3<mask_scalar_merge_name>,
	<avx512>_gt<mode>3<mask_scalar_merge_name>,
	<avx512>_testm<mode>3<mask_scalar_merge_name>,
	<avx512>_testnm<mode>3<mask_scalar_merge_name>,
	*<avx512>_testm<VI1248_AVX512VLBW:mode>3_zext,
	*<avx512>_testm<VI1248_AVX512VLBW:mode>3_zext_mask,
	*<avx512>_testnm<VI1248_AVX512VLBW:mode>3_zext,
	*<avx512>_testnm<VI1248_AVX512VLBW:mode>3_zext_mask,
	avx512cd_maskb_vec_dup<mode>,
	avx512cd_maskw_vec_dup<mode>,
	avx512dq_fpclass<mode><mask_scalar_merge_name>,
	avx512dq_vmfpclass<mode>,
	avx512vl_vpshufbitqmb<mode><mask_scalar_merge_name>): Use =k
	instead of =Yk.

2019-01-03  Martin Sebor  <msebor@redhat.com>

	PR tree-optimization/88659
	* calls.c (maybe_warn_nonstring_arg): Avoid assuming maxlen is set.

2019-01-03  Aaron Sawdey  <acsawdey@linux.ibm.com>

	* config/rs6000/rs6000-string.c (expand_block_move): Don't use
	unaligned vsx and avoid lxvd2x/stxvd2x.
	(gen_lvx_v4si_move): New function.

2019-01-03  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (MACH_VECTOR_LENGTH, MACH_MAX_WORKERS): Define.
	(init_axis_dim, nvptx_mach_max_workers, nvptx_mach_vector_length): New
	function.
	* config/nvptx/nvptx.h (struct machine_function): Add axis_dims.

2019-01-03  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (struct offload_attrs): New.
	(populate_offload_attrs): New function.  Factor mask extraction out of
	nvptx_reorg.  Add extraction of dimensions.
	(nvptx_reorg): Use populate_offload_attrs.

2019-01-03  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): Add early-out
	cases for oacc_min_dims_p and routine_p.  Add asserts for
	oacc_default_dims_p and offload_region_p.

2019-01-03  Tom de Vries  <tdevries@suse.de>

	* config/nvptx/nvptx.c (nvptx_goacc_validate_dims_1): New function,
	factored out of ...
	(nvptx_goacc_validate_dims): ... here.

2019-01-03  Jan Hubicka  <hubicka@ucw.cz>

	PR tree-optimization/85574
	* tree-ssa-uncprop.c (struct equiv_hash_elt): Remove unused
	structure.
	(struct ssa_equip_hash_traits): Declare.
	(val_ssa_equiv): Use custom hash traits using operand_equal_p.

2019-01-03  Jakub Jelinek  <jakub@redhat.com>

	PR debug/88644
	* dwarf2out.c (modified_type_die): If type is equal to sizetype,
	change it to qualified_type.

2019-01-03  Jan Hubicka  <hubicka@ucw.cz>

	* ipa-utils.c (scale_ipa_profile_for_fn): Break out from ...
	(ipa_merge_profiles): ... here; do not ICE on thunks and aliases.

2019-01-02  Martin Sebor  <msebor@redhat.com>
	    Jeff Law  <law@redhat.com>

	* gimple-fold.c (strlen_range_kind): Remove SRK_LENRANGE_2.
	(get_range_strlen_tree): Update appropriately.
	(get_range_strlen)
	* gimple-fold.h (get_range_strlen): Drop unused last argument.

	* gimple-fold.c (gimple_fold_builtin_strlen): Use set_strlen_range
	rather than set_range_info.
	* tree-ssa-strlen.c (set_strlen_range): Extracted from
	maybe_set_strlen_range.  Handle potentially boundary crossing
	cases more conservatively.
	(maybe_set_strlen_range): Parts refactored into set_strlen_range.
	Call set_strlen_range.
	* tree-ssa-strlen.h (set_strlen_range): Add prototype.

	PR middle-end/88663
	* gimple-fold.c (get_range_strlen): Update prototype to no longer
	need the flexp argument.
	(get_range_strlen_tree): Drop flexp argument.  Drop flexp argument
	from calls to get_range_strlen.  Update comments.  Just update
	VAL for an unterminated const char array and let the reset of the
	code handle it normally.  No longer try to set *flexp.  Adjust
	return value.
	(get_range_strlen): Update for the new get_range_strlen API.
	(get_maxval_strlen): Similarly.
	(gimple_fold_builtin_strlen): Handle update meaning of return value
	from get_range_strlen.
	* gimple-ssa-sprintf.c (get_string_length): Update for the new
	get_range_strlen API.

2019-01-02  Jan Hubicka  <hubicka@ucw.cz>

	PR lto/88130
	* varpool.c (varpool_node::ctor_useable_for_folding_p): Also return
	false at WPA time when body was removed.

2019-01-02  Martin Liska  <mliska@suse.cz>

	PR tree-optimization/88650
	* predict.c (set_even_probabilities): Calculate probability
	remainer only when really used.

2019-01-02  Richard Biener  <rguenther@suse.de>

	PR middle-end/88651
	* tree-data-ref.c (analyze_subscript_affine_affine): Use
	widest_ints when mangling max_stmt_execution results.

2019-01-02  Richard Biener  <rguenther@suse.de>

	PR tree-optimization/88621
	* tree-ssa-loop-im.c (gather_mem_refs_stmt): Fix pastos, avoid
	bitfields when canoncalizing.

2019-01-02  Richard Biener  <rguenther@suse.de>

	PR target/87545
	* config/i386/x86-tune-costs.h (intel_cost): Adjust
	cost of cheap SSE instruction.

2019-01-02  Richard Biener  <rguenther@suse.de>

	PR ipa/85574
	* ipa-icf.h (sem_item_optimizer::sort_congruence_split): Declare.
	* ipa-icf.c (sem_item_optimizer::sort_congruence_split): New
	function.
	(sem_item_optimizer::do_congruence_step_f): Sort the congruence
	set after UIDs before splitting them.

2019-01-01  Martin Sebor  <msebor@redhat.com>
	    Jeff Law  <law@redhat.com>

	* gimple-fold.c (get_range_strlen_tree): Record if the computed
	length is optimistic.  If it is, then arrange to compute the
	conservative length as well.

	* gimple-fold.h (get_range_strlen): Update prototype.
	* builtins.c (check_access): Update call to get_range_strlen to use
	c_strlen_data pointer.   Change various variable accesses to instead
	pull data from the c_strlen_data structure.
	(check_strncat_sizes, expand_builtin_strncat): Likewise.
	* calls.c (maybe_warn_nonstring_arg): Likewise.
	* tree-ssa-strlen.c (maybe_diag_stxncpy_trunc): Likewise.  Reset
	minimum length if maximum lengh is unknown.
	* gimple-ssa-sprintf.c (get_string_length): Likewise.  Drop code
	that used c_strlen, it's no longer needed.  Restructure slightly.
	(format_string): Set unlikely range appropriately.
	* gimple-fold.c (get_range_strlen): Update comments.  Fix minor
	formatting issues.
	(get_range_strlen): Accept c_strlen_data pointer for external
	call sites as well.  Pass through to call to internal get_range_strlen.
	Adjust minlen, maxlen and maxbound as needed.
	(get_maxval_strlen): Update comments.
	(gimple_fold_builtin_strlen): Update call to get_range_strlen
	to use c_strlen_data pointer.  Change variable accesses to instead
	use c_strlen_data data members.

	* gimple-fold.c (get_range_strlen): Update prototype.
	(get_range_strlen_tree): Update prototype.  Drop minlen/maxlen
	local variables.  Use pdata to return information to caller.
	Update calls to get_range_strlen.  Update pdata->maxbound.
	(get_range_strlen -- static version): Similarly.
	(get_range_strlen -- extern version): Update for internal
	get_range_strlen API change.  Convert to external data format.
	(get_maxval_strlen): Similarly.

2019-01-01  Jan Hubicka  <hubicka@ucw.cz>

	* coverage.c (get_coverage_counts): Use current_function_decl.
	* profile.c (read_thunk_profile): New function.
	(branch_prob): Add THUNK parameter.
	* tree-profile.c (tree_profiling): Handle thunks.
	* value-prof.c (init_node_map): Handle thunks.
	* value-prof.h (branch_prob): Upate prototype.
	(read_thunk_profile): Declare.

2019-01-01  Jakub Jelinek  <jakub@redhat.com>

	Update copyright years.

	* gcc.c (process_command): Update copyright notice dates.
	* gcov-dump.c (print_version): Ditto.
	* gcov.c (print_version): Ditto.
	* gcov-tool.c (print_version): Ditto.
	* gengtype.c (create_file): Ditto.
	* doc/cpp.texi: Bump @copying's copyright year.
	* doc/cppinternals.texi: Ditto.
	* doc/gcc.texi: Ditto.
	* doc/gccint.texi: Ditto.
	* doc/gcov.texi: Ditto.
	* doc/install.texi: Ditto.
	* doc/invoke.texi: Ditto.

Copyright (C) 2019 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.