| dnl aclocal.m4 generated automatically by aclocal 1.4 |
| |
| dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. |
| dnl This file is free software; the Free Software Foundation |
| dnl gives unlimited permission to copy and/or distribute it, |
| dnl with or without modifications, as long as this notice is preserved. |
| |
| dnl This program is distributed in the hope that it will be useful, |
| dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without |
| dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A |
| dnl PARTICULAR PURPOSE. |
| |
| # Copyright (c) 1999-2001, 2002 by Red Hat, Inc. All rights reserved. |
| # |
| # THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED |
| # OR IMPLIED. ANY USE IS AT YOUR OWN RISK. |
| # |
| # Permission is hereby granted to use or copy this program |
| # for any purpose, provided the above notices are retained on all copies. |
| # Permission to modify the code and to distribute modified code is granted, |
| # provided the above notices are retained, and a notice that the code was |
| # modified is included with the above copyright notice. |
| # |
| # Original author: Tom Tromey |
| |
| # FIXME: We temporarily define our own version of AC_PROG_CC. This is |
| # copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We |
| # are probably using a cross compiler, which will not be able to fully |
| # link an executable. This should really be fixed in autoconf |
| # itself. |
| |
| AC_DEFUN(GC_CONFIGURE, |
| [ |
| dnl Default to --enable-multilib |
| AC_ARG_ENABLE(multilib, |
| [ --enable-multilib build many library versions (default)], |
| [case "${enableval}" in |
| yes) multilib=yes ;; |
| no) multilib=no ;; |
| *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;; |
| esac], [multilib=yes])dnl |
| |
| dnl We may get other options which we don't document: |
| dnl --with-target-subdir, --with-multisrctop, --with-multisubdir |
| |
| dnl I needed to add the -n test to allow configuration in src directory - HB |
| if test "[$]{srcdir}" = "."; then |
| if test "[$]{with_target_subdir}" != "." -a -n "[$]{with_target_subdir}"; then |
| gc_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1" |
| else |
| gc_basedir="[$]{srcdir}/[$]{with_multisrctop}$1" |
| fi |
| else |
| gc_basedir="[$]{srcdir}/$1" |
| fi |
| AC_SUBST(gc_basedir) |
| AC_CONFIG_AUX_DIR($gc_basedir/..) |
| if :; then :; else |
| # This overrides the previous occurrence for automake, but not for |
| # autoconf, which is exactly what we want. |
| AC_CONFIG_AUX_DIR(..) |
| fi |
| |
| AC_CANONICAL_SYSTEM |
| |
| # This works around an automake problem. |
| mkinstalldirs="`cd $ac_aux_dir && ${PWDCMD-pwd}`/mkinstalldirs" |
| AC_SUBST(mkinstalldirs) |
| |
| AM_INIT_AUTOMAKE(gc, 6.0, no-define) |
| |
| # FIXME: We temporarily define our own version of AC_PROG_CC. This is |
| # copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We |
| # are probably using a cross compiler, which will not be able to fully |
| # link an executable. This should really be fixed in autoconf |
| # itself. |
| |
| AC_DEFUN(LIB_AC_PROG_CC, |
| [AC_BEFORE([$0], [AC_PROG_CPP])dnl |
| dnl Fool anybody using AC_PROG_CC. |
| AC_PROVIDE([AC_PROG_CC]) |
| AC_CHECK_PROG(CC, gcc, gcc) |
| if test -z "$CC"; then |
| AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc) |
| test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH]) |
| fi |
| |
| AC_PROG_CC_GNU |
| |
| if test $ac_cv_prog_gcc = yes; then |
| GCC=yes |
| dnl Check whether -g works, even if CFLAGS is set, in case the package |
| dnl plays around with CFLAGS (such as to build both debugging and |
| dnl normal versions of a library), tasteless as that idea is. |
| ac_test_CFLAGS="${CFLAGS+set}" |
| ac_save_CFLAGS="$CFLAGS" |
| CFLAGS= |
| AC_PROG_CC_G |
| if test "$ac_test_CFLAGS" = set; then |
| CFLAGS="$ac_save_CFLAGS" |
| elif test $ac_cv_prog_cc_g = yes; then |
| CFLAGS="-g -O2" |
| else |
| CFLAGS="-O2" |
| fi |
| else |
| GCC= |
| test "${CFLAGS+set}" = set || CFLAGS="-g" |
| fi |
| ]) |
| |
| LIB_AC_PROG_CC |
| |
| # Likewise for AC_PROG_CXX. |
| AC_DEFUN(LIB_AC_PROG_CXX, |
| [AC_BEFORE([$0], [AC_PROG_CXXCPP])dnl |
| dnl Fool anybody using AC_PROG_CXX. |
| AC_PROVIDE([AC_PROG_CXX]) |
| AC_CHECK_PROGS(CXX, $CCC c++ g++ gcc CC cxx cc++, gcc) |
| test -z "$CXX" && AC_MSG_ERROR([no acceptable c++ found in \$PATH]) |
| |
| AC_PROG_CXX_GNU |
| |
| if test $ac_cv_prog_gxx = yes; then |
| GXX=yes |
| dnl Check whether -g works, even if CXXFLAGS is set, in case the package |
| dnl plays around with CXXFLAGS (such as to build both debugging and |
| dnl normal versions of a library), tasteless as that idea is. |
| ac_test_CXXFLAGS="${CXXFLAGS+set}" |
| ac_save_CXXFLAGS="$CXXFLAGS" |
| CXXFLAGS= |
| AC_PROG_CXX_G |
| if test "$ac_test_CXXFLAGS" = set; then |
| CXXFLAGS="$ac_save_CXXFLAGS" |
| elif test $ac_cv_prog_cxx_g = yes; then |
| CXXFLAGS="-g -O2" |
| else |
| CXXFLAGS="-O2" |
| fi |
| else |
| GXX= |
| test "${CXXFLAGS+set}" = set || CXXFLAGS="-g" |
| fi |
| ]) |
| |
| LIB_AC_PROG_CXX |
| |
| # AC_CHECK_TOOL does AC_REQUIRE (AC_CANONICAL_BUILD). If we don't |
| # run it explicitly here, it will be run implicitly before |
| # NEWLIB_CONFIGURE, which doesn't work because that means that it will |
| # be run before AC_CANONICAL_HOST. |
| AC_CANONICAL_BUILD |
| |
| AC_CHECK_TOOL(AS, as) |
| AC_CHECK_TOOL(AR, ar) |
| AC_CHECK_TOOL(RANLIB, ranlib, :) |
| |
| AC_PROG_INSTALL |
| |
| AM_MAINTAINER_MODE |
| |
| # We need AC_EXEEXT to keep automake happy in cygnus mode. However, |
| # at least currently, we never actually build a program, so we never |
| # need to use $(EXEEXT). Moreover, the test for EXEEXT normally |
| # fails, because we are probably configuring with a cross compiler |
| # which can't create executables. So we include AC_EXEEXT to keep |
| # automake happy, but we don't execute it, since we don't care about |
| # the result. |
| if false; then |
| # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands |
| # to nothing, so nothing would remain between `then' and `fi' if it |
| # were not for the `:' below. |
| : |
| AC_EXEEXT |
| fi |
| |
| . [$]{srcdir}/configure.host |
| |
| case [$]{gc_basedir} in |
| /* | [A-Za-z]:[/\\]*) gc_flagbasedir=[$]{gc_basedir} ;; |
| *) gc_flagbasedir='[$](top_builddir)/'[$]{gc_basedir} ;; |
| esac |
| |
| gc_cflags="[$]{gc_cflags} -I"'[$](top_builddir)'"/$1/targ-include -I[$]{gc_flagbasedir}/libc/include" |
| case "${host}" in |
| *-*-cygwin32*) |
| gc_cflags="[$]{gc_cflags} -I[$]{gc_flagbasedir}/../winsup/include" |
| ;; |
| esac |
| |
| dnl gc_cflags="[$]{gc_cflags} -fno-builtin" |
| |
| GC_CFLAGS=${gc_cflags} |
| AC_SUBST(GC_CFLAGS) |
| ])) |
| |
| )))) |
| |
| sinclude(../libtool.m4) |
| dnl The line below arranges for aclocal not to bring a definition of |
| dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake |
| dnl to add a definition of LIBTOOL to Makefile.in. |
| ifelse(yes,no,[AC_DEFUN([AM_PROG_LIBTOOL],[AC_SUBST(LIBTOOL)])]) |
| |
| # Do all the work for Automake. This macro actually does too much -- |
| # some checks are only needed if your package does certain things. |
| # But this isn't really a big deal. |
| |
| # serial 1 |
| |
| dnl Usage: |
| dnl AM_INIT_AUTOMAKE(package,version, [no-define]) |
| |
| AC_DEFUN(AM_INIT_AUTOMAKE, |
| [AC_REQUIRE([AC_PROG_INSTALL]) |
| PACKAGE=[$1] |
| AC_SUBST(PACKAGE) |
| VERSION=[$2] |
| AC_SUBST(VERSION) |
| dnl test to see if srcdir already configured |
| if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then |
| AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) |
| fi |
| ifelse([$3],, |
| AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) |
| AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])) |
| AC_REQUIRE([AM_SANITY_CHECK]) |
| AC_REQUIRE([AC_ARG_PROGRAM]) |
| dnl FIXME This is truly gross. |
| missing_dir=`cd $ac_aux_dir && pwd` |
| AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir) |
| AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir) |
| AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir) |
| AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir) |
| AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir) |
| AC_REQUIRE([AC_PROG_MAKE_SET])]) |
| |
| # |
| # Check to make sure that the build environment is sane. |
| # |
| |
| AC_DEFUN(AM_SANITY_CHECK, |
| [AC_MSG_CHECKING([whether build environment is sane]) |
| # Just in case |
| sleep 1 |
| echo timestamp > conftestfile |
| # Do `set' in a subshell so we don't clobber the current shell's |
| # arguments. Must try -L first in case configure is actually a |
| # symlink; some systems play weird games with the mod time of symlinks |
| # (eg FreeBSD returns the mod time of the symlink's containing |
| # directory). |
| if ( |
| set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` |
| if test "[$]*" = "X"; then |
| # -L didn't work. |
| set X `ls -t $srcdir/configure conftestfile` |
| fi |
| if test "[$]*" != "X $srcdir/configure conftestfile" \ |
| && test "[$]*" != "X conftestfile $srcdir/configure"; then |
| |
| # If neither matched, then we have a broken ls. This can happen |
| # if, for instance, CONFIG_SHELL is bash and it inherits a |
| # broken ls alias from the environment. This has actually |
| # happened. Such a system could not be considered "sane". |
| AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken |
| alias in your environment]) |
| fi |
| |
| test "[$]2" = conftestfile |
| ) |
| then |
| # Ok. |
| : |
| else |
| AC_MSG_ERROR([newly created file is older than distributed files! |
| Check your system clock]) |
| fi |
| rm -f conftest* |
| AC_MSG_RESULT(yes)]) |
| |
| dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY) |
| dnl The program must properly implement --version. |
| AC_DEFUN(AM_MISSING_PROG, |
| [AC_MSG_CHECKING(for working $2) |
| # Run test in a subshell; some versions of sh will print an error if |
| # an executable is not found, even if stderr is redirected. |
| # Redirect stdin to placate older versions of autoconf. Sigh. |
| if ($2 --version) < /dev/null > /dev/null 2>&1; then |
| $1=$2 |
| AC_MSG_RESULT(found) |
| else |
| $1="$3/missing $2" |
| AC_MSG_RESULT(missing) |
| fi |
| AC_SUBST($1)]) |
| |
| # Add --enable-maintainer-mode option to configure. |
| # From Jim Meyering |
| |
| # serial 1 |
| |
| AC_DEFUN(AM_MAINTAINER_MODE, |
| [AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) |
| dnl maintainer-mode is disabled by default |
| AC_ARG_ENABLE(maintainer-mode, |
| [ --enable-maintainer-mode enable make rules and dependencies not useful |
| (and sometimes confusing) to the casual installer], |
| USE_MAINTAINER_MODE=$enableval, |
| USE_MAINTAINER_MODE=no) |
| AC_MSG_RESULT($USE_MAINTAINER_MODE) |
| AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes) |
| MAINT=$MAINTAINER_MODE_TRUE |
| AC_SUBST(MAINT)dnl |
| ] |
| ) |
| |
| # Define a conditional. |
| |
| AC_DEFUN(AM_CONDITIONAL, |
| [AC_SUBST($1_TRUE) |
| AC_SUBST($1_FALSE) |
| if $2; then |
| $1_TRUE= |
| $1_FALSE='#' |
| else |
| $1_TRUE='#' |
| $1_FALSE= |
| fi]) |
| |