| # Makefile for GNU Compiler Collection |
| # Run 'configure' to generate Makefile from Makefile.in |
| |
| # Copyright (C) 1987, 1988, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, |
| # 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc. |
| |
| #This file is part of GCC. |
| |
| #GCC is free software; you can redistribute it and/or modify |
| #it under the terms of the GNU General Public License as published by |
| #the Free Software Foundation; either version 2, or (at your option) |
| #any later version. |
| |
| #GCC is distributed in the hope that it will be useful, |
| #but WITHOUT ANY WARRANTY; without even the implied warranty of |
| #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| #GNU General Public License for more details. |
| |
| #You should have received a copy of the GNU General Public License |
| #along with GCC; see the file COPYING. If not, write to |
| #the Free Software Foundation, 59 Temple Place - Suite 330, |
| #Boston MA 02111-1307, USA. |
| |
| # The targets for external use include: |
| # all, doc, proto, install, install-cross, install-cross-rest, |
| # uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean, |
| # stage1, stage2, stage3, stage4. |
| |
| # This is the default target. |
| # Set by autoconf to "all.internal" for a native build, or |
| # "all.cross" to build a cross compiler. |
| all: @ALL@ |
| |
| # Depend on this to specify a phony target portably. |
| force: |
| |
| # This tells GNU make version 3 not to export the variables |
| # defined in this file into the environment (and thus recursive makes). |
| .NOEXPORT: |
| # And this tells it not to automatically pass command-line variables |
| # to recursive makes. |
| MAKEOVERRIDES = |
| |
| # Suppress smart makes who think they know how to automake yacc and flex file |
| .y.c: |
| .l.c: |
| |
| # The only suffixes we want for implicit rules are .c and .o, so clear |
| # the list and add them. This speeds up GNU Make, and allows -r to work. |
| # For i18n support, we also need .gmo, .po, .pox. |
| # This must come before the language makefile fragments to allow them to |
| # add suffixes and rules of their own. |
| .SUFFIXES: |
| .SUFFIXES: .c .o .po .pox .gmo |
| |
| # ------------------------------- |
| # Standard autoconf-set variables |
| # ------------------------------- |
| |
| build=@build@ |
| host=@host@ |
| target=@target@ |
| target_noncanonical:=@target_noncanonical@ |
| |
| # Sed command to transform gcc to installed name. |
| program_transform_name := @program_transform_name@ |
| |
| # ----------------------------- |
| # Directories used during build |
| # ----------------------------- |
| |
| # Directory where sources are, from where we are. |
| srcdir = @srcdir@ |
| docdir = @srcdir@/doc |
| |
| # Directory where sources are, absolute. |
| abs_srcdir = @abs_srcdir@ |
| abs_docdir = @abs_srcdir@/doc |
| |
| # Top build directory, relative to here. |
| top_builddir = .. |
| # objdir is set by configure. |
| # It's normally the absolute path to the current directory. |
| objdir = @objdir@ |
| |
| # -------- |
| # Defined vpaths |
| # -------- |
| |
| # Directory where sources are, from where we are. |
| VPATH = @srcdir@ |
| |
| # We define a vpath for the sources of the .texi files here because they |
| # are split between multiple directories and we would rather use one implicit |
| # pattern rule for everything. |
| # This vpath could be extended within the Make-lang fragments. |
| |
| vpath %.texi $(docdir):$(docdir)/include |
| |
| # ---- |
| # Default values for variables overridden in Makefile fragments. |
| # These need to be quite early in the Makefile so as to avoid |
| # trouble induced by changes in fragment ordering. |
| # ---- |
| |
| # For ada/Make-lang.in; overridden in, for example, config/pa/x-ada. |
| X_ADA_CFLAGS = |
| T_ADA_CFLAGS = |
| X_ADAFLAGS = |
| T_ADAFLAGS = |
| |
| # -------- |
| # UNSORTED |
| # -------- |
| |
| # Variables that exist for you to override. |
| # See below for how to change them for certain systems. |
| |
| # List of language subdirectories. |
| SUBDIRS =@subdirs@ |
| |
| # Selection of languages to be made. |
| CONFIG_LANGUAGES = @all_languages@ |
| LANGUAGES = c gcov$(exeext) gcov-dump$(exeext) $(CONFIG_LANGUAGES) |
| |
| # Selection of languages to be made during stage1 build. |
| BOOT_LANGUAGES = c @all_boot_languages@ |
| |
| # Various ways of specifying flags for compilations: |
| # CFLAGS is for the user to override to, e.g., do a cross build with -O2. |
| # For recursive bootstrap builds CFLAGS is used to pass in STAGE1_CFLAGS |
| # or BOOT_CFLAGS |
| # STAGE1_CFLAGS is set by configure on some targets or passed from toplevel |
| # and sets the CFLAGS passed to stage1 of a bootstrap compilation. |
| # BOOT_CFLAGS is the value of CFLAGS to pass to the stage2, stage3 and stage4 |
| # bootstrap compilations. |
| # XCFLAGS is used for most compilations but not when using the GCC just built. |
| # TCFLAGS is used for compilations with the GCC just built. |
| XCFLAGS = |
| TCFLAGS = |
| CFLAGS = -g |
| STAGE1_CFLAGS = -g @stage1_cflags@ |
| BOOT_CFLAGS = -g -O2 |
| |
| # Flags to determine code coverage. When coverage is disabled, this will |
| # contain the optimization flags, as you normally want code coverage |
| # without optimization. |
| COVERAGE_FLAGS = @coverage_flags@ |
| coverageexts = .{gcda,gcno} |
| |
| # The warning flags are separate from BOOT_CFLAGS because people tend to |
| # override optimization flags and we'd like them to still have warnings |
| # turned on. These flags are also used to pass other stage dependent |
| # flags from configure. The user is free to explicitly turn these flags |
| # off if they wish. |
| # LOOSE_WARN are the warning flags to use when compiling something |
| # which is only compiled with gcc, such as libgcc and the frontends |
| # other than C. |
| # STRICT_WARN and STRICT2_WARN are the additional warning flags to |
| # apply to the back end and the C front end, which may be compiled |
| # with other compilers. This is partially controlled by configure in |
| # stage1, as not all versions of gcc understand -Wno-long-long. |
| LOOSE_WARN = -W -Wall -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes |
| STRICT_WARN = @strict1_warn@ |
| STRICT2_WARN = -pedantic -Wno-long-long -Wold-style-definition @WERROR@ |
| |
| # This is set by --enable-checking. The idea is to catch forgotten |
| # "extern" tags in header files. |
| NOCOMMON_FLAG = @nocommon_flag@ |
| |
| # This is set by --disable-maintainer-mode (default) to "#" |
| MAINT := @MAINT@ |
| |
| # These are set by --enable-checking=valgrind. |
| RUN_GEN = @valgrind_command@ |
| VALGRIND_DRIVER_DEFINES = @valgrind_path_defines@ |
| |
| # This is how we control whether or not the additional warnings are applied. |
| .-warn = $(STRICT_WARN) |
| GCC_WARN_CFLAGS = $(LOOSE_WARN) $($(@D)-warn) $(NOCOMMON_FLAG) $($@-warn) |
| |
| # These files are to have -Werror bypassed in stage2: |
| # These are very hard to completely clean due to target complexities. |
| gcc.o-warn = -Wno-error |
| insn-conditions.o-warn = -Wno-error |
| # Bison-1.75 output often yields (harmless) -Wtraditional warnings |
| gengtype-yacc.o-warn = -Wno-error |
| c-parse.o-warn = -Wno-error |
| # flex output may yield harmless "no previous prototype" warnings |
| gengtype-lex.o-warn = -Wno-error |
| # SYSCALLS.c misses prototypes |
| SYSCALLS.c.X-warn = -Wno-strict-prototypes -Wno-error |
| |
| # All warnings have to be shut off in stage1 if the compiler used then |
| # isn't gcc; configure determines that. WARN_CFLAGS will be either |
| # $(GCC_WARN_CFLAGS), or nothing. |
| WARN_CFLAGS = @warn_cflags@ |
| |
| CPPFLAGS = @CPPFLAGS@ |
| |
| # These exists to be overridden by the x-* and t-* files, respectively. |
| X_CFLAGS = |
| T_CFLAGS = |
| |
| X_CPPFLAGS = |
| T_CPPFLAGS = |
| |
| AWK = @AWK@ |
| CC = @CC@ |
| BISON = @BISON@ |
| BISONFLAGS = |
| FLEX = @FLEX@ |
| FLEXFLAGS = |
| AR = ar |
| AR_FLAGS = rc |
| RANLIB = @RANLIB@ |
| |
| # ------------------------------------------- |
| # Programs which operate on the build machine |
| # ------------------------------------------- |
| |
| SHELL = @SHELL@ |
| # pwd command to use. Allow user to override default by setting PWDCMD in |
| # the environment to account for automounters. The make variable must not |
| # be called PWDCMD, otherwise the value set here is passed to make |
| # subprocesses and overrides the setting from the user's environment. |
| # Don't use PWD since it is a common shell environment variable and we |
| # don't want to corrupt it. |
| PWD_COMMAND = $${PWDCMD-pwd} |
| # on sysV, define this as cp. |
| INSTALL = @INSTALL@ |
| # Some systems may be missing symbolic links, regular links, or both. |
| # Allow configure to check this and use "ln -s", "ln", or "cp" as appropriate. |
| LN=@LN@ |
| LN_S=@LN_S@ |
| # These permit overriding just for certain files. |
| INSTALL_PROGRAM = @INSTALL_PROGRAM@ |
| INSTALL_DATA = @INSTALL_DATA@ |
| INSTALL_SCRIPT = @INSTALL@ |
| MAKEINFO = @MAKEINFO@ |
| MAKEINFOFLAGS = --no-split |
| TEXI2DVI = texi2dvi |
| TEXI2POD = perl $(srcdir)/../contrib/texi2pod.pl |
| POD2MAN = pod2man --center="GNU" --release="gcc-$(version)" |
| # Some versions of `touch' (such as the version on Solaris 2.8) |
| # do not correctly set the timestamp due to buggy versions of `utime' |
| # in the kernel. So, we use `echo' instead. |
| STAMP = echo timestamp > |
| |
| # Make sure the $(MAKE) variable is defined. |
| @SET_MAKE@ |
| REMAKEFLAGS=LANGUAGES="$(LANGUAGES)" BOOT_CFLAGS="$(BOOT_CFLAGS)" |
| |
| # -------- |
| # UNSORTED |
| # -------- |
| |
| # Some compilers can't handle cc -c blah.c -o foo/blah.o. |
| # In stage2 and beyond, we force this to "-o $@" since we know we're using gcc. |
| OUTPUT_OPTION = @OUTPUT_OPTION@ |
| |
| # This is where we get zlib from. zlibdir is -L../zlib and zlibinc is |
| # -I../zlib, unless we were configured with --with-system-zlib, in which |
| # case both are empty. |
| ZLIB = @zlibdir@ -lz |
| ZLIBINC = @zlibinc@ |
| |
| # Substitution type for target's getgroups 2nd arg. |
| TARGET_GETGROUPS_T = @TARGET_GETGROUPS_T@ |
| |
| # Target to use when installing include directory. Either |
| # install-headers-tar, install-headers-cpio or install-headers-cp. |
| INSTALL_HEADERS_DIR = @build_install_headers_dir@ |
| |
| # Header files that are made available under the same name |
| # to programs compiled with GCC. |
| USER_H = $(srcdir)/ginclude/float.h \ |
| $(srcdir)/ginclude/iso646.h \ |
| $(srcdir)/ginclude/stdarg.h \ |
| $(srcdir)/ginclude/stdbool.h \ |
| $(srcdir)/ginclude/stddef.h \ |
| $(srcdir)/ginclude/varargs.h \ |
| $(srcdir)/unwind.h \ |
| $(EXTRA_HEADERS) |
| |
| # The GCC to use for compiling libgcc.a and crt*.o. |
| # Usually the one we just built. |
| # Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS). |
| GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) ./xgcc -B./ -B$(build_tooldir)/bin/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include -L$(objdir)/../ld |
| |
| # This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET. |
| # It omits XCFLAGS, and specifies -B./. |
| # It also specifies -isystem ./include to find, e.g., stddef.h. |
| GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(LOOSE_WARN) -Wold-style-definition $($@-warn) -isystem ./include $(TCFLAGS) |
| |
| # --------------------------------------------------- |
| # Programs which produce files for the target machine |
| # --------------------------------------------------- |
| |
| AR_FOR_TARGET = ` \ |
| if [ -f $(objdir)/../binutils/ar ] ; then \ |
| echo $(objdir)/../binutils/ar ; \ |
| else \ |
| if [ "$(host)" = "$(target)" ] ; then \ |
| echo ar; \ |
| else \ |
| t='$(program_transform_name)'; echo ar | sed -e $$t ; \ |
| fi; \ |
| fi` |
| AR_FLAGS_FOR_TARGET = |
| AR_CREATE_FOR_TARGET = $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) rc |
| AR_EXTRACT_FOR_TARGET = $(AR_FOR_TARGET) $(AR_FLAGS_FOR_TARGET) x |
| RANLIB_FOR_TARGET = ` \ |
| if [ -f $(objdir)/../binutils/ranlib ] ; then \ |
| echo $(objdir)/../binutils/ranlib ; \ |
| else \ |
| if [ "$(host)" = "$(target)" ] ; then \ |
| echo $(RANLIB); \ |
| else \ |
| t='$(program_transform_name)'; echo ranlib | sed -e $$t ; \ |
| fi; \ |
| fi` |
| NM_FOR_TARGET = ` \ |
| if [ -f ./nm ] ; then \ |
| echo ./nm ; \ |
| elif [ -f $(objdir)/../binutils/nm-new ] ; then \ |
| echo $(objdir)/../binutils/nm-new ; \ |
| else \ |
| if [ "$(host)" = "$(target)" ] ; then \ |
| echo nm; \ |
| else \ |
| t='$(program_transform_name)'; echo nm | sed -e $$t ; \ |
| fi; \ |
| fi` |
| |
| # -------- |
| # UNSORTED |
| # -------- |
| |
| # Where to find some libiberty headers. |
| HASHTAB_H = $(srcdir)/../include/hashtab.h |
| OBSTACK_H = $(srcdir)/../include/obstack.h |
| SPLAY_TREE_H= $(srcdir)/../include/splay-tree.h |
| FIBHEAP_H = $(srcdir)/../include/fibheap.h |
| PARTITION_H = $(srcdir)/../include/partition.h |
| |
| # Default native SYSTEM_HEADER_DIR, to be overridden by targets. |
| NATIVE_SYSTEM_HEADER_DIR = /usr/include |
| # Default cross SYSTEM_HEADER_DIR, to be overridden by targets. |
| CROSS_SYSTEM_HEADER_DIR = @CROSS_SYSTEM_HEADER_DIR@ |
| |
| # autoconf sets SYSTEM_HEADER_DIR to one of the above. |
| SYSTEM_HEADER_DIR = @SYSTEM_HEADER_DIR@ |
| |
| # Control whether to run fixproto and fixincludes. |
| STMP_FIXPROTO = @STMP_FIXPROTO@ |
| STMP_FIXINC = @STMP_FIXINC@ |
| |
| # Test to see whether <limits.h> exists in the system header files. |
| LIMITS_H_TEST = [ -f $(SYSTEM_HEADER_DIR)/limits.h ] |
| |
| # Directory for prefix to system directories, for |
| # each of $(system_prefix)/usr/include, $(system_prefix)/usr/lib, etc. |
| TARGET_SYSTEM_ROOT = @TARGET_SYSTEM_ROOT@ |
| |
| xmake_file=@xmake_file@ |
| tmake_file=@tmake_file@ |
| out_file=$(srcdir)/config/@out_file@ |
| out_object_file=@out_object_file@ |
| md_file=$(srcdir)/config/@md_file@ |
| tm_file_list=@tm_file_list@ |
| tm_include_list=@tm_include_list@ |
| tm_defines=@tm_defines@ |
| tm_p_file_list=@tm_p_file_list@ |
| tm_p_include_list=@tm_p_include_list@ |
| build_xm_file_list=@build_xm_file_list@ |
| build_xm_include_list=@build_xm_include_list@ |
| build_xm_defines=@build_xm_defines@ |
| host_xm_file_list=@host_xm_file_list@ |
| host_xm_include_list=@host_xm_include_list@ |
| host_xm_defines=@host_xm_defines@ |
| xm_file_list=@xm_file_list@ |
| xm_include_list=@xm_include_list@ |
| xm_defines=@xm_defines@ |
| lang_checks=check-gcc |
| lang_opt_files=@lang_opt_files@ $(srcdir)/c.opt $(srcdir)/common.opt |
| lang_specs_files=@lang_specs_files@ |
| lang_tree_files=@lang_tree_files@ |
| target_cpu_default=@target_cpu_default@ |
| GCC_THREAD_FILE=@thread_file@ |
| OBJC_BOEHM_GC=@objc_boehm_gc@ |
| GTHREAD_FLAGS=@gthread_flags@ |
| extra_modes_file=@extra_modes_file@ |
| host_hook_obj=@out_host_hook_obj@ |
| # Be prepared for gcc2 merges. |
| gcc_version=@gcc_version@ |
| gcc_version_trigger=@gcc_version_trigger@ |
| version=$(gcc_version) |
| mainversion=`grep version_string $(srcdir)/version.c | sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/'` |
| |
| # ------------------------ |
| # Installation directories |
| # ------------------------ |
| |
| # Common prefix for installation directories. |
| # NOTE: This directory must exist when you start installation. |
| prefix = @prefix@ |
| # Directory in which to put localized header files. On the systems with |
| # gcc as the native cc, `local_prefix' may not be `prefix' which is |
| # `/usr'. |
| # NOTE: local_prefix *should not* default from prefix. |
| local_prefix = @local_prefix@ |
| # Directory in which to put host dependent programs and libraries |
| exec_prefix = @exec_prefix@ |
| # Directory in which to put the executable for the command `gcc' |
| bindir = @bindir@ |
| # Directory in which to put the directories used by the compiler. |
| libdir = @libdir@ |
| # Directory in which GCC puts its executables. |
| libexecdir = @libexecdir@ |
| |
| # -------- |
| # UNSORTED |
| # -------- |
| |
| # Directory in which the compiler finds libraries etc. |
| libsubdir = $(libdir)/gcc/$(target_noncanonical)/$(version) |
| # Directory in which the compiler finds executables |
| libexecsubdir = $(libexecdir)/gcc/$(target_noncanonical)/$(version) |
| # Used to produce a relative $(gcc_tooldir) in gcc.o |
| unlibsubdir = ../../.. |
| # Directory in which to find other cross-compilation tools and headers. |
| dollar = @dollar@ |
| # Used in install-cross. |
| gcc_tooldir = @gcc_tooldir@ |
| # Used to install the shared libgcc. |
| slibdir = @slibdir@ |
| # Since gcc_tooldir does not exist at build-time, use -B$(build_tooldir)/bin/ |
| build_tooldir = $(exec_prefix)/$(target_noncanonical) |
| # Directory in which the compiler finds target-independent g++ includes. |
| gcc_gxx_include_dir = @gcc_gxx_include_dir@ |
| # Directory to search for site-specific includes. |
| local_includedir = $(local_prefix)/include |
| includedir = $(prefix)/include |
| # where the info files go |
| infodir = @infodir@ |
| # Where cpp should go besides $prefix/bin if necessary |
| cpp_install_dir = @cpp_install_dir@ |
| # where the locale files go |
| datadir = @datadir@ |
| localedir = $(datadir)/locale |
| # Extension (if any) to put in installed man-page filename. |
| man1ext = .1 |
| man7ext = .7 |
| objext = .o |
| exeext = @host_exeext@ |
| build_exeext = @build_exeext@ |
| |
| # Directory in which to put man pages. |
| mandir = @mandir@ |
| man1dir = $(mandir)/man1 |
| man7dir = $(mandir)/man7 |
| # Dir for temp files. |
| tmpdir = /tmp |
| |
| # Whether we were configured with NLS. |
| USE_NLS = @USE_NLS@ |
| |
| # Internationalization library. |
| LIBINTL = @LIBINTL@ |
| LIBINTL_DEP = @LIBINTL_DEP@ |
| |
| # Character encoding conversion library. |
| LIBICONV = @LIBICONV@ |
| LIBICONV_DEP = @LIBICONV_DEP@ |
| |
| # The GC method to be used on this system. |
| GGC=@GGC@.o |
| |
| # If a supplementary library is being used for the GC. |
| GGC_LIB= |
| |
| # libgcc.a may be built directly or via stmp-multilib, |
| # and installed likewise. Overridden by t-fragment. |
| LIBGCC = libgcc.a |
| INSTALL_LIBGCC = install-libgcc |
| |
| # Options to use when compiling libgcc2.a. |
| # |
| LIBGCC2_DEBUG_CFLAGS = -g |
| LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(TARGET_LIBGCC2_CFLAGS) $(LIBGCC2_DEBUG_CFLAGS) $(GTHREAD_FLAGS) -DIN_LIBGCC2 -D__GCC_FLOAT_NOT_NEEDED @inhibit_libc@ |
| |
| # Additional options to use when compiling libgcc2.a. |
| # Some targets override this to -isystem include |
| LIBGCC2_INCLUDES = |
| |
| # Additional target-dependent options for compiling libgcc2.a. |
| TARGET_LIBGCC2_CFLAGS = |
| |
| # Options to use when compiling crtbegin/end. |
| CRTSTUFF_CFLAGS = -O2 $(GCC_CFLAGS) $(INCLUDES) $(MULTILIB_CFLAGS) -g0 \ |
| -finhibit-size-directive -fno-inline-functions -fno-exceptions \ |
| -fno-zero-initialized-in-bss -fno-unit-at-a-time |
| |
| # Additional sources to handle exceptions; overridden by targets as needed. |
| LIB2ADDEH = $(srcdir)/unwind-dw2.c $(srcdir)/unwind-dw2-fde.c \ |
| $(srcdir)/unwind-sjlj.c $(srcdir)/gthr-gnat.c $(srcdir)/unwind-c.c |
| LIB2ADDEHDEP = unwind.inc unwind-dw2-fde.h |
| |
| # nm flags to list global symbols in libgcc object files. |
| SHLIB_NM_FLAGS = -pg |
| |
| # List of extra executables that should be compiled for this target machine |
| # that are used for compiling from source code to object code. |
| # The rules for compiling them should be in the t-* file for the machine. |
| EXTRA_PASSES =@extra_passes@ |
| |
| # Like EXTRA_PASSES, but these are used when linking. |
| EXTRA_PROGRAMS = @extra_programs@ |
| |
| # List of extra object files that should be compiled for this target machine. |
| # The rules for compiling them should be in the t-* file for the machine. |
| EXTRA_PARTS = @extra_parts@ |
| |
| # List of extra object files that should be compiled and linked with |
| # compiler proper (cc1, cc1obj, cc1plus). |
| EXTRA_OBJS = @extra_objs@ |
| |
| # List of extra object files that should be compiled and linked with |
| # the gcc driver. |
| EXTRA_GCC_OBJS =@extra_gcc_objs@ |
| |
| # List of additional header files to install. |
| EXTRA_HEADERS =@extra_headers_list@ |
| |
| # It is convenient for configure to add the assignment at the beginning, |
| # so don't override it here. |
| USE_COLLECT2 = collect2$(exeext) |
| |
| # List of extra C and assembler files to add to static and shared libgcc2. |
| # Assembler files should have names ending in `.asm'. |
| LIB2FUNCS_EXTRA = |
| |
| # List of extra C and assembler files to add to static libgcc2. |
| # Assembler files should have names ending in `.asm'. |
| LIB2FUNCS_STATIC_EXTRA = |
| |
| # Program to convert libraries. |
| LIBCONVERT = |
| |
| # Control whether header files are installed. |
| INSTALL_HEADERS=install-headers install-mkheaders |
| |
| # Control whether Info documentation is built and installed. |
| BUILD_INFO = @BUILD_INFO@ |
| |
| # Control whether manpages generated by texi2pod.pl can be rebuilt. |
| GENERATED_MANPAGES = @GENERATED_MANPAGES@ |
| |
| # Additional directories of header files to run fixincludes on. |
| # These should be directories searched automatically by default |
| # just as /usr/include is. |
| # *Do not* use this for directories that happen to contain |
| # header files, but are not searched automatically by default. |
| # On most systems, this is empty. |
| OTHER_FIXINCLUDES_DIRS= |
| |
| # A list of all the language-specific executables. |
| COMPILERS = cc1$(exeext) @all_compilers@ |
| |
| # List of things which should already be built whenever we try to use xgcc |
| # to compile anything (without linking). |
| GCC_PASSES=xgcc$(exeext) cc1$(exeext) specs $(EXTRA_PASSES) |
| |
| # List of things which should already be built whenever we try to use xgcc |
| # to link anything. |
| GCC_PARTS=$(GCC_PASSES) $(LIBGCC) $(EXTRA_PROGRAMS) $(USE_COLLECT2) $(EXTRA_PARTS) |
| |
| # Directory to link to, when using the target `maketest'. |
| DIR = ../gcc |
| |
| # Flags to use when cross-building GCC. |
| # Prefix to apply to names of object files when using them |
| # to run on the machine we are compiling on. |
| BUILD_PREFIX = @BUILD_PREFIX@ |
| # Prefix to apply to names of object files when compiling them |
| # to run on the machine we are compiling on. |
| # The default for this variable is chosen to keep these rules |
| # out of the way of the other rules for compiling the same source files. |
| BUILD_PREFIX_1 = @BUILD_PREFIX_1@ |
| # Native compiler for the build machine and its switches. |
| CC_FOR_BUILD = @CC_FOR_BUILD@ |
| BUILD_CFLAGS= @BUILD_CFLAGS@ -DGENERATOR_FILE |
| |
| # Native linker and preprocessor flags. For x-fragment overrides. |
| BUILD_LDFLAGS=$(LDFLAGS) |
| BUILD_CPPFLAGS=$(ALL_CPPFLAGS) |
| |
| # Actual name to use when installing a native compiler. |
| GCC_INSTALL_NAME := $(shell echo gcc|sed '$(program_transform_name)') |
| GCC_TARGET_INSTALL_NAME := $(target_noncanonical)-$(shell echo gcc|sed '$(program_transform_name)') |
| CPP_INSTALL_NAME := $(shell echo cpp|sed '$(program_transform_name)') |
| PROTOIZE_INSTALL_NAME := $(shell echo protoize|sed '$(program_transform_name)') |
| UNPROTOIZE_INSTALL_NAME := $(shell echo unprotoize|sed '$(program_transform_name)') |
| GCOV_INSTALL_NAME := $(shell echo gcov|sed '$(program_transform_name)') |
| GCCBUG_INSTALL_NAME := $(shell echo gccbug|sed '$(program_transform_name)') |
| |
| # Setup the testing framework, if you have one |
| EXPECT = `if [ -f $${rootme}/../expect/expect ] ; then \ |
| echo $${rootme}/../expect/expect ; \ |
| else echo expect ; fi` |
| |
| RUNTEST = `if [ -f $${srcdir}/../dejagnu/runtest ] ; then \ |
| echo $${srcdir}/../dejagnu/runtest ; \ |
| else echo runtest; fi` |
| RUNTESTFLAGS = |
| |
| # Extra symbols for fixproto to define when parsing headers. |
| FIXPROTO_DEFINES = |
| |
| # Extra flags to use when compiling crt{begin,end}.o. |
| CRTSTUFF_T_CFLAGS = |
| |
| # Extra flags to use when compiling [m]crt0.o. |
| CRT0STUFF_T_CFLAGS = |
| |
| # "t" or nothing, for building multilibbed versions of, say, crtbegin.o. |
| T = |
| |
| # Should T contain a `=', libgcc.mk will make T_TARGET, setting |
| # $(T_TARGET) to the name of the actual target filename. |
| T_TARGET = |
| T_TARGET : $(T_TARGET) |
| |
| # This should name the specs file that we're going to install. Target |
| # Makefiles may override it and name another file to be generated from |
| # the built-in specs and installed as the default spec, as long as |
| # they also introduce a rule to generate a file name specs, to be used |
| # at build time. |
| SPECS = specs |
| |
| # End of variables for you to override. |
| |
| # GTM_H lists the config files that the generator files depend on, |
| # while TM_H lists the ones ordinary gcc files depend on, which |
| # includes several files generated by those generators. |
| BCONFIG_H = bconfig.h $(build_xm_file_list) |
| CONFIG_H = config.h $(host_xm_file_list) |
| TCONFIG_H = tconfig.h $(xm_file_list) |
| TM_P_H = tm_p.h $(tm_p_file_list) |
| GTM_H = tm.h $(tm_file_list) |
| TM_H = $(GTM_H) insn-constants.h insn-flags.h |
| |
| TARGET_H = $(TM_H) target.h |
| HOOKS_H = hooks.h |
| LANGHOOKS_DEF_H = langhooks-def.h $(HOOKS_H) |
| TARGET_DEF_H = target-def.h $(HOOKS_H) |
| MACHMODE_H = machmode.h mode-classes.def insn-modes.h |
| RTL_BASE_H = rtl.h rtl.def $(MACHMODE_H) |
| RTL_H = $(RTL_BASE_H) genrtl.h input.h |
| PARAMS_H = params.h params.def |
| TREE_H = tree.h tree.def $(MACHMODE_H) tree-check.h version.h builtins.def \ |
| input.h |
| BASIC_BLOCK_H = basic-block.h bitmap.h sbitmap.h varray.h $(PARTITION_H) \ |
| hard-reg-set.h cfghooks.h |
| COVERAGE_H = coverage.h gcov-io.h gcov-iov.h |
| DEMANGLE_H = $(srcdir)/../include/demangle.h |
| RECOG_H = recog.h |
| EXPR_H = expr.h |
| OPTABS_H = optabs.h insn-codes.h |
| REGS_H = regs.h varray.h $(MACHMODE_H) |
| INTEGRATE_H = integrate.h varray.h |
| LOOP_H = loop.h varray.h bitmap.h |
| GCC_H = gcc.h version.h |
| GGC_H = ggc.h gtype-desc.h |
| TIMEVAR_H = timevar.h timevar.def |
| INSN_ATTR_H = insn-attr.h $(srcdir)/insn-addr.h $(srcdir)/varray.h |
| C_COMMON_H = c-common.h $(SPLAY_TREE_H) $(CPPLIB_H) |
| C_TREE_H = c-tree.h $(C_COMMON_H) |
| SYSTEM_H = system.h hwint.h $(srcdir)/../include/libiberty.h |
| PREDICT_H = predict.h predict.def |
| CPPLIB_H = cpplib.h line-map.h |
| PRETTY_PRINT_H = pretty-print.h input.h $(OBSTACK_H) |
| DIAGNOSTIC_H = diagnostic.h diagnostic.def $(PRETTY_PRINT_H) |
| C_PRETTY_PRINT_H = $(PRETTY_PRINT_H) $(C_COMMON_H) $(TREE_H) |
| |
| # |
| # Now figure out from those variables how to compile and link. |
| |
| # IN_GCC distinguishes between code compiled into GCC itself and other |
| # programs built during a bootstrap. |
| # autoconf inserts -DCROSS_COMPILE if we are building a cross compiler. |
| INTERNAL_CFLAGS = -DIN_GCC @CROSS@ |
| |
| # This is the variable actually used when we compile. If you change this, |
| # you probably want to update BUILD_CFLAGS in configure.ac |
| ALL_CFLAGS = $(X_CFLAGS) $(T_CFLAGS) \ |
| $(CFLAGS) $(INTERNAL_CFLAGS) $(COVERAGE_FLAGS) $(WARN_CFLAGS) $(XCFLAGS) @DEFS@ |
| |
| # Likewise. |
| ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS) |
| |
| # Build and host support libraries. FORBUILD is either |
| # .. or ../$(build_alias) depending on whether host != build. |
| LIBIBERTY = ../libiberty/libiberty.a |
| BUILD_LIBIBERTY = @FORBUILD@/libiberty/libiberty.a |
| |
| # Dependencies on the intl and portability libraries. |
| LIBDEPS= $(LIBIBERTY) $(LIBINTL_DEP) $(LIBICONV_DEP) |
| |
| # Likewise, for use in the tools that must run on this machine |
| # even if we are cross-building GCC. |
| BUILD_LIBDEPS= $(BUILD_LIBIBERTY) |
| |
| # How to link with both our special library facilities |
| # and the system's installed libraries. |
| LIBS = @LIBS@ $(LIBIBERTY) $(LIBINTL) $(LIBICONV) |
| |
| # Any system libraries needed just for GNAT. |
| SYSLIBS = @GNAT_LIBEXC@ |
| |
| # Libs needed (at present) just for jcf-dump. |
| LDEXP_LIB = @LDEXP_LIB@ |
| |
| # Likewise, for use in the tools that must run on this machine |
| # even if we are cross-building GCC. |
| BUILD_LIBS = $(BUILD_LIBIBERTY) |
| |
| BUILD_RTL = $(BUILD_PREFIX)rtl.o read-rtl.o $(BUILD_PREFIX)bitmap.o \ |
| $(BUILD_PREFIX)ggc-none.o min-insn-modes.o |
| BUILD_SUPPORT = gensupport.o insn-conditions.o |
| BUILD_EARLY_SUPPORT = gensupport.o dummy-conditions.o |
| |
| BUILD_PRINT = print-rtl1.o |
| BUILD_ERRORS = $(BUILD_PREFIX)errors.o |
| BUILD_VARRAY = $(BUILD_PREFIX)varray.o |
| |
| # Specify the directories to be searched for header files. |
| # Both . and srcdir are used, in that order, |
| # so that *config.h will be found in the compilation |
| # subdirectory rather than in the source directory. |
| # -I$(@D) and -I$(srcdir)/$(@D) cause the subdirectory of the file |
| # currently being compiled, in both source trees, to be examined as well. |
| # libintl.h will be found in ../intl if we are using the included libintl. |
| INCLUDES = -I. -I$(@D) -I$(srcdir) -I$(srcdir)/$(@D) \ |
| -I$(srcdir)/../include @INCINTL@ |
| |
| .c.o: |
| $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION) |
| |
| # |
| # Support for additional languages (other than C). |
| # C can be supported this way too (leave for later). |
| |
| LANG_MAKEFRAGS = @all_lang_makefrags@ |
| LANG_MAKEFILES = @all_lang_makefiles@ |
| LANG_STAGESTUFF = @all_stagestuff@ |
| |
| # Flags to pass to recursive makes. |
| # CC is set by configure. Hosts without symlinks need special handling |
| # because we need CC="stage1/xgcc -Bstage1/" to work in the language |
| # subdirectories. |
| # ??? The choices here will need some experimenting with. |
| |
| export AR_FOR_TARGET |
| export AR_CREATE_FOR_TARGET |
| export AR_FLAGS_FOR_TARGET |
| export AR_EXTRACT_FOR_TARGET |
| export AWK |
| export BUILD_PREFIX |
| export BUILD_PREFIX_1 |
| export DESTDIR |
| export GCC_FOR_TARGET |
| export INCLUDES |
| export INSTALL_DATA |
| export LIB1ASMSRC |
| export LIBGCC2_CFLAGS |
| export MACHMODE_H |
| export NM_FOR_TARGET |
| export RANLIB_FOR_TARGET |
| export libsubdir |
| export slibdir |
| |
| ORDINARY_FLAGS_TO_PASS = \ |
| "BISON=$(BISON)" \ |
| "BISONFLAGS=$(BISONFLAGS)" \ |
| "CFLAGS=$(CFLAGS) $(WARN_CFLAGS)" \ |
| "LDFLAGS=$(LDFLAGS)" \ |
| "FLEX=$(FLEX)" \ |
| "FLEXFLAGS=$(FLEXFLAGS)" \ |
| "LN=$(LN)" \ |
| "LN_S=$(LN_S)" \ |
| "MAKEINFO=$(MAKEINFO)" \ |
| "MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \ |
| "MAKEOVERRIDES=" \ |
| "SHELL=$(SHELL)" \ |
| "exeext=$(exeext)" \ |
| "build_exeext=$(build_exeext)" \ |
| "objext=$(objext)" \ |
| "exec_prefix=$(exec_prefix)" \ |
| "prefix=$(prefix)" \ |
| "local_prefix=$(local_prefix)" \ |
| "gxx_include_dir=$(gcc_gxx_include_dir)" \ |
| "build_tooldir=$(build_tooldir)" \ |
| "gcc_tooldir=$(gcc_tooldir)" \ |
| "bindir=$(bindir)" \ |
| "libexecsubdir=$(libsubdir)" \ |
| "datadir=$(datadir)" \ |
| "localedir=$(localedir)" |
| FLAGS_TO_PASS = $(ORDINARY_FLAGS_TO_PASS) "CC=@cc_set_by_configure@" \ |
| "STAGE_PREFIX=@stage_prefix_set_by_configure@" |
| PREPEND_DOTDOT_TO_RELATIVE_PATHS = sed \ |
| -e 's|^ *[^ /][^ /]*/|%&|' \ |
| -e 's| -B| -B%|g' \ |
| -e 's|% *[^- /]|%&|g' \ |
| -e 's|%% *|../|g' \ |
| -e 's|%||g' |
| SUBDIR_FLAGS_TO_PASS = $(ORDINARY_FLAGS_TO_PASS) \ |
| "CC=`echo @quoted_cc_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`" \ |
| "STAGE_PREFIX=`echo @quoted_stage_prefix_set_by_configure@ | $(PREPEND_DOTDOT_TO_RELATIVE_PATHS)`" |
| # |
| # Lists of files for various purposes. |
| |
| # Target specific, C specific object file |
| C_TARGET_OBJS=@c_target_objs@ |
| |
| # Target specific, C++ specific object file |
| CXX_TARGET_OBJS=@cxx_target_objs@ |
| |
| # Language-specific object files for C and Objective C. |
| C_AND_OBJC_OBJS = attribs.o c-errors.o c-lex.o c-pragma.o c-decl.o c-typeck.o \ |
| c-convert.o c-aux-info.o c-common.o c-opts.o c-format.o c-semantics.o \ |
| c-incpath.o cppdefault.o c-ppoutput.o c-cppbuiltin.o prefix.o \ |
| c-objc-common.o c-dump.o c-pch.o libcpp.a $(C_TARGET_OBJS) |
| |
| # Language-specific object files for C. |
| C_OBJS = c-parse.o c-lang.o c-pretty-print.o stub-objc.o $(C_AND_OBJC_OBJS) |
| |
| # Language-independent object files. |
| |
| OBJS-common = \ |
| alias.o bb-reorder.o bitmap.o builtins.o caller-save.o calls.o \ |
| cfg.o cfganal.o cfgbuild.o cfgcleanup.o cfglayout.o cfgloop.o \ |
| cfgloopanal.o cfgloopmanip.o loop-init.o loop-unswitch.o loop-unroll.o \ |
| cfgrtl.o combine.o conflict.o convert.o coverage.o cse.o cselib.o \ |
| dbxout.o debug.o df.o diagnostic.o dojump.o doloop.o dominance.o \ |
| dwarf2asm.o dwarf2out.o emit-rtl.o except.o explow.o \ |
| expmed.o expr.o final.o flow.o fold-const.o function.o gcse.o \ |
| genrtl.o ggc-common.o global.o graph.o gtype-desc.o \ |
| haifa-sched.o hooks.o ifcvt.o insn-attrtab.o insn-emit.o insn-modes.o \ |
| insn-extract.o insn-opinit.o insn-output.o insn-peep.o insn-recog.o \ |
| integrate.o intl.o jump.o langhooks.o lcm.o lists.o local-alloc.o \ |
| loop.o optabs.o options.o opts.o params.o postreload.o predict.o \ |
| print-rtl.o print-tree.o value-prof.o \ |
| profile.o ra.o ra-build.o ra-colorize.o ra-debug.o ra-rewrite.o \ |
| real.o recog.o reg-stack.o regclass.o regmove.o regrename.o \ |
| reload.o reload1.o reorg.o resource.o rtl.o rtlanal.o rtl-error.o \ |
| sbitmap.o sched-deps.o sched-ebb.o sched-rgn.o sched-vis.o sdbout.o \ |
| sibcall.o simplify-rtx.o sreal.o stmt.o stor-layout.o stringpool.o \ |
| targhooks.o timevar.o toplev.o tracer.o tree.o tree-dump.o unroll.o \ |
| varasm.o varray.o version.o vmsdbgout.o xcoffout.o alloc-pool.o \ |
| et-forest.o cfghooks.o bt-load.o pretty-print.o $(GGC) web.o |
| |
| OBJS-md = $(out_object_file) |
| OBJS-archive = $(EXTRA_OBJS) $(host_hook_obj) hashtable.o tree-inline.o \ |
| tree-optimize.o cgraph.o cgraphunit.o |
| |
| OBJS = $(OBJS-common) $(out_object_file) $(OBJS-archive) |
| |
| OBJS-onestep = libbackend.o $(OBJS-archive) |
| |
| BACKEND = main.o libbackend.a |
| |
| # Files to be copied away after each stage in building. |
| STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \ |
| insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \ |
| insn-attr.h insn-attrtab.c insn-opinit.c insn-constants.h tm-preds.h \ |
| tree-check.h insn-conditions.c min-insn-modes.c insn-modes.c insn-modes.h \ |
| s-flags s-config s-codes s-mlib s-genrtl s-modes s-gtype gtyp-gen.h \ |
| s-output s-recog s-emit s-extract s-peep s-check s-conditions \ |
| s-attr s-attrtab s-opinit s-preds s-constants s-crt0 \ |
| genemit$(build_exeext) genoutput$(build_exeext) genrecog$(build_exeext) \ |
| genextract$(build_exeext) genflags$(build_exeext) gencodes$(build_exeext) \ |
| genconfig$(build_exeext) genpeep$(build_exeext) genattrtab$(build_exeext) \ |
| genattr$(build_exeext) genopinit$(build_exeext) gengenrtl$(build_exeext) \ |
| gencheck$(build_exeext) genpreds$(build_exeext) genconstants$(build_exeext) \ |
| gengtype$(build_exeext) genconditions$(build_exeext) genmodes$(build_exeext) \ |
| genrtl.c genrtl.h gt-*.h gtype-*.h gtype-desc.c \ |
| xgcc$(exeext) cpp$(exeext) cc1$(exeext) $(EXTRA_PASSES) \ |
| $(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) \ |
| protoize$(exeext) unprotoize$(exeext) \ |
| $(SPECS) collect2$(exeext) $(USE_COLLECT2) \ |
| gcov-iov$(build_exeext) gcov$(exeext) gcov-dump$(exeext) \ |
| *.[0-9][0-9].* *.[si] libcpp.a libbackend.a libgcc.mk \ |
| $(LANG_STAGESTUFF) |
| |
| # Defined in libgcc2.c, included only in the static library. |
| LIB2FUNCS_ST = _eprintf __gcc_bcmp |
| |
| # Defined in libgcov.c, included only in gcov library |
| LIBGCOV = _gcov _gcov_merge_add _gcov_merge_single _gcov_merge_delta |
| |
| FPBIT_FUNCS = _pack_sf _unpack_sf _addsub_sf _mul_sf _div_sf \ |
| _fpcmp_parts_sf _compare_sf _eq_sf _ne_sf _gt_sf _ge_sf \ |
| _lt_sf _le_sf _unord_sf _si_to_sf _sf_to_si _negate_sf _make_sf \ |
| _sf_to_df _sf_to_tf _thenan_sf _sf_to_usi _usi_to_sf |
| |
| DPBIT_FUNCS = _pack_df _unpack_df _addsub_df _mul_df _div_df \ |
| _fpcmp_parts_df _compare_df _eq_df _ne_df _gt_df _ge_df \ |
| _lt_df _le_df _unord_df _si_to_df _df_to_si _negate_df _make_df \ |
| _df_to_sf _df_to_tf _thenan_df _df_to_usi _usi_to_df |
| |
| TPBIT_FUNCS = _pack_tf _unpack_tf _addsub_tf _mul_tf _div_tf \ |
| _fpcmp_parts_tf _compare_tf _eq_tf _ne_tf _gt_tf _ge_tf \ |
| _lt_tf _le_tf _unord_tf _si_to_tf _tf_to_si _negate_tf _make_tf \ |
| _tf_to_df _tf_to_sf _thenan_tf _tf_to_usi _usi_to_tf |
| |
| # These might cause a divide overflow trap and so are compiled with |
| # unwinder info. |
| LIB2_DIVMOD_FUNCS = _divdi3 _moddi3 _udivdi3 _umoddi3 _udiv_w_sdiv _udivmoddi4 |
| |
| # |
| # Language makefile fragments. |
| |
| # The following targets define the interface between us and the languages. |
| # |
| # all.cross, start.encap, rest.encap, |
| # install-normal, install-common, install-info, install-man, |
| # uninstall, |
| # mostlyclean, clean, distclean, maintainer-clean, |
| # stage1, stage2, stage3, stage4 |
| # |
| # Each language is linked in with a series of hooks. The name of each |
| # hooked is "lang.${target_name}" (eg: lang.info). Configure computes |
| # and adds these here. We use double-colon rules for some of the hooks; |
| # double-colon rules should be preferred for any new hooks. |
| |
| # language hooks, generated by configure |
| @language_hooks@ |
| |
| # per-language makefile fragments |
| ifneq ($(LANG_MAKEFRAGS),) |
| include $(LANG_MAKEFRAGS) |
| endif |
| |
| # target and host overrides must follow the per-language makefile fragments |
| # so they can override or augment language-specific variables |
| |
| # target overrides |
| ifneq ($(tmake_file),) |
| include $(tmake_file) |
| endif |
| |
| # host overrides |
| ifneq ($(xmake_file),) |
| include $(xmake_file) |
| endif |
| |
| # |
| |
| # ----------------------------- |
| # Rebuilding this configuration |
| # ----------------------------- |
| |
| Makefile: config.status $(srcdir)/Makefile.in $(srcdir)/version.c $(LANG_MAKEFRAGS) |
| LANGUAGES="$(CONFIG_LANGUAGES)" \ |
| CONFIG_HEADERS= \ |
| CONFIG_SHELL="$(SHELL)" \ |
| CONFIG_FILES=$@ $(SHELL) config.status |
| |
| config.h: cs-config.h ; @true |
| bconfig.h: cs-bconfig.h ; @true |
| tconfig.h: cs-tconfig.h ; @true |
| tm.h: cs-tm.h ; @true |
| tm_p.h: cs-tm_p.h ; @true |
| |
| cs-config.h: Makefile |
| TARGET_CPU_DEFAULT="" \ |
| HEADERS="$(host_xm_include_list)" DEFINES="$(host_xm_defines)" \ |
| $(SHELL) $(srcdir)/mkconfig.sh config.h |
| |
| cs-bconfig.h: Makefile |
| TARGET_CPU_DEFAULT="" \ |
| HEADERS="$(build_xm_include_list)" DEFINES="$(build_xm_defines)" \ |
| $(SHELL) $(srcdir)/mkconfig.sh bconfig.h |
| |
| cs-tconfig.h: Makefile |
| TARGET_CPU_DEFAULT="" \ |
| HEADERS="$(xm_include_list)" DEFINES="$(xm_defines)" \ |
| $(SHELL) $(srcdir)/mkconfig.sh tconfig.h |
| |
| cs-tm.h: Makefile |
| TARGET_CPU_DEFAULT="$(target_cpu_default)" \ |
| HEADERS="$(tm_include_list)" DEFINES="$(tm_defines)" \ |
| $(SHELL) $(srcdir)/mkconfig.sh tm.h |
| |
| cs-tm_p.h: Makefile |
| TARGET_CPU_DEFAULT="" \ |
| HEADERS="$(tm_p_include_list)" DEFINES="" \ |
| $(SHELL) $(srcdir)/mkconfig.sh tm_p.h |
| |
| # Don't automatically run autoconf, since configure.ac might be accidentally |
| # newer than configure. Also, this writes into the source directory which |
| # might be on a read-only file system. If configured for maintainer mode |
| # then do allow autoconf to be run. |
| |
| $(srcdir)/configure: @MAINT@ $(srcdir)/configure.ac |
| (cd $(srcdir) && autoconf) |
| |
| gccbug: $(srcdir)/gccbug.in |
| CONFIG_FILES=gccbug CONFIG_HEADERS= ./config.status |
| |
| mklibgcc: $(srcdir)/mklibgcc.in |
| CONFIG_FILES=mklibgcc CONFIG_HEADERS= ./config.status |
| |
| mkheaders: $(srcdir)/mkheaders.in |
| CONFIG_FILES=mkheaders CONFIG_HEADERS= ./config.status |
| |
| # cstamp-h.in controls rebuilding of config.in. |
| # It is named cstamp-h.in and not stamp-h.in so the mostlyclean rule doesn't |
| # delete it. A stamp file is needed as autoheader won't update the file if |
| # nothing has changed. |
| # It remains in the source directory and is part of the distribution. |
| # This follows what is done in shellutils, fileutils, etc. |
| # "echo timestamp" is used instead of touch to be consistent with other |
| # packages that use autoconf (??? perhaps also to avoid problems with patch?). |
| # ??? Newer versions have a maintainer mode that may be useful here. |
| |
| # Don't run autoheader automatically either. |
| # Only run it if maintainer mode is enabled. |
| @MAINT@ $(srcdir)/config.in: $(srcdir)/cstamp-h.in |
| @MAINT@ $(srcdir)/cstamp-h.in: $(srcdir)/configure.ac |
| @MAINT@ (cd $(srcdir) && autoheader) |
| @MAINT@ @rm -f $(srcdir)/cstamp-h.in |
| @MAINT@ echo timestamp > $(srcdir)/cstamp-h.in |
| auto-host.h: cstamp-h ; @true |
| cstamp-h: config.in config.status |
| CONFIG_HEADERS=auto-host.h:config.in \ |
| CONFIG_FILES= \ |
| LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.status |
| |
| # Really, really stupid make features, such as SUN's KEEP_STATE, may force |
| # a target to build even if it is up-to-date. So we must verify that |
| # config.status does not exist before failing. |
| config.status: $(srcdir)/configure $(srcdir)/config.gcc version.c |
| @if [ ! -f config.status ] ; then \ |
| echo You must configure gcc. Look at http://gcc.gnu.org/install/ for details.; \ |
| false; \ |
| else \ |
| LANGUAGES="$(CONFIG_LANGUAGES)" $(SHELL) config.status --recheck; \ |
| fi |
| |
| # -------- |
| # UNSORTED |
| # -------- |
| |
| all.internal: start.encap rest.encap doc |
| # This is what to compile if making a cross-compiler. |
| all.cross: native gcc-cross cpp$(exeext) specs \ |
| $(LIBGCC) $(EXTRA_PARTS) lang.all.cross doc |
| # This is what must be made before installing GCC and converting libraries. |
| start.encap: native xgcc$(exeext) cpp$(exeext) specs \ |
| xlimits.h lang.start.encap @GENINSRC@ srcextra |
| # These can't be made until after GCC can run. |
| rest.encap: $(STMP_FIXPROTO) $(LIBGCC) $(EXTRA_PARTS) lang.rest.encap |
| # This is what is made with the host's compiler |
| # whether making a cross compiler or not. |
| native: config.status auto-host.h build-@POSUB@ $(LANGUAGES) \ |
| $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2) |
| |
| # Define the names for selecting languages in LANGUAGES. |
| C c: cc1$(exeext) |
| PROTO: proto |
| |
| # Tell GNU make these are phony targets. |
| .PHONY: C c PROTO proto |
| |
| # On the target machine, finish building a cross compiler. |
| # This does the things that can't be done on the host machine. |
| rest.cross: $(LIBGCC) specs |
| |
| # Recompile all the language-independent object files. |
| # This is used only if the user explicitly asks for it. |
| compilations: $(BACKEND) |
| |
| # Like libcpp.a, this archive is strictly for the host. |
| libbackend.a: $(OBJS@onestep@) |
| -rm -rf libbackend.a |
| $(AR) $(AR_FLAGS) libbackend.a $(OBJS@onestep@) |
| -$(RANLIB) libbackend.a |
| |
| # We call this executable `xgcc' rather than `gcc' |
| # to avoid confusion if the current directory is in the path |
| # and CC is `gcc'. It is renamed to `gcc' when it is installed. |
| xgcc$(exeext): gcc.o gccspec.o version.o intl.o prefix.o \ |
| version.o $(LIBDEPS) $(EXTRA_GCC_OBJS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o gccspec.o intl.o \ |
| prefix.o version.o $(EXTRA_GCC_OBJS) $(LIBS) |
| |
| # cpp is to cpp0 as gcc is to cc1. |
| # The only difference from xgcc is that it's linked with cppspec.o |
| # instead of gccspec.o. |
| cpp$(exeext): gcc.o cppspec.o version.o intl.o prefix.o \ |
| version.o $(LIBDEPS) $(EXTRA_GCC_OBJS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o cppspec.o intl.o \ |
| prefix.o version.o $(EXTRA_GCC_OBJS) $(LIBS) |
| |
| # Dump a specs file to make -B./ read these specs over installed ones. |
| $(SPECS): xgcc$(exeext) |
| $(GCC_FOR_TARGET) -dumpspecs > tmp-specs |
| mv tmp-specs $(SPECS) |
| |
| # We do want to create an executable named `xgcc', so we can use it to |
| # compile libgcc2.a. |
| # Also create gcc-cross, so that install-common will install properly. |
| gcc-cross: xgcc$(exeext) |
| cp xgcc$(exeext) gcc-cross$(exeext) |
| |
| cc1$(exeext): $(C_OBJS) $(BACKEND) $(LIBDEPS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o cc1$(exeext) \ |
| $(C_OBJS) $(BACKEND) $(LIBS) |
| |
| # Build the version of limits.h that we will install. |
| xlimits.h: glimits.h limitx.h limity.h |
| if $(LIMITS_H_TEST) ; then \ |
| cat $(srcdir)/limitx.h $(srcdir)/glimits.h $(srcdir)/limity.h > tmp-xlimits.h; \ |
| else \ |
| cat $(srcdir)/glimits.h > tmp-xlimits.h; \ |
| fi |
| mv tmp-xlimits.h xlimits.h |
| # |
| # Build libgcc.a. |
| |
| LIB2ADD = $(LIB2FUNCS_EXTRA) |
| LIB2ADD_ST = $(LIB2FUNCS_STATIC_EXTRA) |
| |
| libgcc.mk: config.status Makefile mklibgcc $(LIB2ADD) $(LIB2ADD_ST) xgcc$(exeext) specs |
| objext='$(objext)' \ |
| LIB1ASMFUNCS='$(LIB1ASMFUNCS)' \ |
| LIB2FUNCS_ST='$(LIB2FUNCS_ST)' \ |
| LIBGCOV='$(LIBGCOV)' \ |
| LIB2ADD='$(LIB2ADD)' \ |
| LIB2ADD_ST='$(LIB2ADD_ST)' \ |
| LIB2ADDEH='$(LIB2ADDEH)' \ |
| LIB2ADDEHDEP='$(LIB2ADDEHDEP)' \ |
| FPBIT='$(FPBIT)' \ |
| FPBIT_FUNCS='$(FPBIT_FUNCS)' \ |
| LIB2_DIVMOD_FUNCS='$(LIB2_DIVMOD_FUNCS)' \ |
| DPBIT='$(DPBIT)' \ |
| DPBIT_FUNCS='$(DPBIT_FUNCS)' \ |
| TPBIT='$(TPBIT)' \ |
| TPBIT_FUNCS='$(TPBIT_FUNCS)' \ |
| MULTILIBS=`$(GCC_FOR_TARGET) --print-multi-lib` \ |
| EXTRA_MULTILIB_PARTS='$(EXTRA_MULTILIB_PARTS)' \ |
| SHLIB_LINK='$(SHLIB_LINK)' \ |
| SHLIB_INSTALL='$(SHLIB_INSTALL)' \ |
| SHLIB_EXT='$(SHLIB_EXT)' \ |
| SHLIB_MULTILIB='$(SHLIB_MULTILIB)' \ |
| SHLIB_MKMAP='$(SHLIB_MKMAP)' \ |
| SHLIB_MKMAP_OPTS='$(SHLIB_MKMAP_OPTS)' \ |
| SHLIB_MAPFILES='$(SHLIB_MAPFILES)' \ |
| SHLIB_NM_FLAGS='$(SHLIB_NM_FLAGS)' \ |
| MULTILIB_OSDIRNAMES='$(MULTILIB_OSDIRNAMES)' \ |
| mkinstalldirs='$(SHELL) $(srcdir)/mkinstalldirs' \ |
| $(SHELL) mklibgcc > tmp-libgcc.mk |
| mv tmp-libgcc.mk libgcc.mk |
| |
| # All the things that might cause us to want to recompile bits of libgcc. |
| LIBGCC_DEPS = $(GCC_PASSES) $(LANGUAGES) stmp-int-hdrs $(STMP_FIXPROTO) \ |
| libgcc.mk $(srcdir)/libgcc2.c $(srcdir)/libgcov.c $(TCONFIG_H) \ |
| $(MACHMODE_H) longlong.h gbl-ctors.h config.status stmp-int-hdrs \ |
| tsystem.h $(FPBIT) $(DPBIT) $(TPBIT) $(LIB2ADD) \ |
| $(LIB2ADD_ST) $(LIB2ADDEH) $(LIB2ADDEHDEP) $(EXTRA_PARTS) \ |
| $(srcdir)/config/$(LIB1ASMSRC) \ |
| $(srcdir)/gcov-io.h $(srcdir)/gcov-io.c gcov-iov.h |
| |
| libgcov.a: libgcc.a; @true |
| |
| libgcc.a: $(LIBGCC_DEPS) |
| $(MAKE) \ |
| CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \ |
| CONFIG_H="$(TCONFIG_H)" TM_H="$(TM_H)" \ |
| INCLUDES="$(INCLUDES)" \ |
| MAKEOVERRIDES= \ |
| -f libgcc.mk all |
| |
| # Use the genmultilib shell script to generate the information the gcc |
| # driver program needs to select the library directory based on the |
| # switches. |
| multilib.h: s-mlib; @true |
| s-mlib: $(srcdir)/genmultilib Makefile |
| if test @enable_multilib@ = yes \ |
| || test -n "$(MULTILIB_OSDIRNAMES)"; then \ |
| $(SHELL) $(srcdir)/genmultilib \ |
| "$(MULTILIB_OPTIONS)" \ |
| "$(MULTILIB_DIRNAMES)" \ |
| "$(MULTILIB_MATCHES)" \ |
| "$(MULTILIB_EXCEPTIONS)" \ |
| "$(MULTILIB_EXTRA_OPTS)" \ |
| "$(MULTILIB_EXCLUSIONS)" \ |
| "$(MULTILIB_OSDIRNAMES)" \ |
| "@enable_multilib@" \ |
| > tmp-mlib.h; \ |
| else \ |
| $(SHELL) $(srcdir)/genmultilib '' '' '' '' '' '' '' no \ |
| > tmp-mlib.h; \ |
| fi |
| $(SHELL) $(srcdir)/move-if-change tmp-mlib.h multilib.h |
| $(STAMP) s-mlib |
| |
| # Build multiple copies of libgcc.a, one for each target switch. |
| stmp-multilib: $(LIBGCC_DEPS) |
| $(MAKE) \ |
| CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \ |
| CONFIG_H="$(CONFIG_H)" \ |
| MAKEOVERRIDES= \ |
| -f libgcc.mk all |
| $(STAMP) stmp-multilib |
| |
| # Compile two additional files that are linked with every program |
| # linked using GCC on systems using COFF or ELF, for the sake of C++ |
| # constructors. |
| $(T)crtbegin.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \ |
| gbl-ctors.h stmp-int-hdrs tsystem.h coretypes.h $(TM_H) |
| $(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS) \ |
| @inhibit_libc@ -c $(srcdir)/crtstuff.c -DCRT_BEGIN \ |
| -o $(T)crtbegin$(objext) |
| |
| $(T)crtend.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \ |
| gbl-ctors.h stmp-int-hdrs tsystem.h coretypes.h $(TM_H) |
| $(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS) \ |
| @inhibit_libc@ -c $(srcdir)/crtstuff.c -DCRT_END \ |
| -o $(T)crtend$(objext) |
| |
| # These are versions of crtbegin and crtend for shared libraries. |
| $(T)crtbeginS.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \ |
| gbl-ctors.h stmp-int-hdrs tsystem.h coretypes.h $(TM_H) |
| $(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS_S) \ |
| @inhibit_libc@ -c $(srcdir)/crtstuff.c -DCRT_BEGIN -DCRTSTUFFS_O \ |
| -o $(T)crtbeginS$(objext) |
| |
| $(T)crtendS.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \ |
| gbl-ctors.h stmp-int-hdrs tsystem.h coretypes.h $(TM_H) |
| $(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS_S) \ |
| @inhibit_libc@ -c $(srcdir)/crtstuff.c -DCRT_END -DCRTSTUFFS_O \ |
| -o $(T)crtendS$(objext) |
| |
| # This is a version of crtbegin for -static links. |
| $(T)crtbeginT.o: crtstuff.c $(GCC_PASSES) $(TCONFIG_H) auto-host.h \ |
| gbl-ctors.h stmp-int-hdrs tsystem.h coretypes.h $(TM_H) |
| $(GCC_FOR_TARGET) $(CRTSTUFF_CFLAGS) $(CRTSTUFF_T_CFLAGS) \ |
| @inhibit_libc@ -c $(srcdir)/crtstuff.c -DCRT_BEGIN -DCRTSTUFFT_O \ |
| -o $(T)crtbeginT$(objext) |
| |
| # Compile the start modules crt0.o and mcrt0.o that are linked with |
| # every program |
| crt0.o: s-crt0 ; @true |
| mcrt0.o: s-crt0; @true |
| |
| s-crt0: $(CRT0_S) $(MCRT0_S) $(GCC_PASSES) $(CONFIG_H) |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \ |
| -o crt0.o -c $(CRT0_S) |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(CRT0STUFF_T_CFLAGS) \ |
| -o mcrt0.o -c $(MCRT0_S) |
| $(STAMP) s-crt0 |
| # |
| # Compiling object files from source files. |
| |
| # Note that dependencies on obstack.h are not written |
| # because that file is not part of GCC. |
| |
| # C language specific files. |
| |
| c-errors.o: c-errors.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(C_TREE_H) flags.h $(DIAGNOSTIC_H) $(TM_P_H) |
| c-parse.o : c-parse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(GGC_H) intl.h $(C_TREE_H) input.h flags.h toplev.h output.h $(CPPLIB_H) \ |
| varray.h gt-c-parse.h |
| |
| srcextra: gcc.srcextra lang.srcextra |
| |
| gcc.srcextra: c-parse.y c-parse.c gengtype-lex.c gengtype-yacc.c gengtype-yacc.h |
| -cp -p $^ $(srcdir) |
| |
| c-parse.c: c-parse.y |
| -$(BISON) $(BISONFLAGS) -o $@ $< |
| |
| c-parse.y: c-parse.in |
| echo '/*WARNING: This file is automatically generated!*/' >tmp-c-parse.y |
| sed -e "/^@@ifobjc.*/,/^@@end_ifobjc.*/d" \ |
| -e "/^@@ifc.*/d" -e "/^@@end_ifc.*/d" $< >>tmp-c-parse.y |
| $(SHELL) $(srcdir)/move-if-change tmp-c-parse.y $@ |
| |
| c-incpath.o: c-incpath.c c-incpath.h $(CONFIG_H) $(SYSTEM_H) $(CPPLIB_H) \ |
| intl.h prefix.h coretypes.h $(TM_H) cppdefault.h |
| |
| c-decl.o : c-decl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(RTL_H) $(C_TREE_H) $(GGC_H) $(TARGET_H) flags.h function.h output.h \ |
| $(EXPR_H) debug.h toplev.h intl.h $(TM_P_H) tree-inline.h $(TIMEVAR_H) \ |
| opts.h c-pragma.h gt-c-decl.h cgraph.h $(HASHTAB_H) libfuncs.h except.h \ |
| $(LANGHOOKS_DEF_H) |
| c-typeck.o : c-typeck.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(C_TREE_H) \ |
| $(TARGET_H) flags.h intl.h output.h $(EXPR_H) $(RTL_H) toplev.h $(TM_P_H) |
| c-lang.o : c-lang.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(C_TREE_H) $(C_PRETTY_PRINT_H) $(DIAGNOSTIC_H) \ |
| $(GGC_H) langhooks.h $(LANGHOOKS_DEF_H) $(C_COMMON_H) gtype-c.h |
| stub-objc.o : stub-objc.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TREE_H) \ |
| $(GGC_H) $(C_COMMON_H) |
| c-lex.o : c-lex.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(RTL_H) debug.h $(C_TREE_H) $(C_COMMON_H) real.h c-incpath.h cppdefault.h \ |
| c-pragma.h input.h intl.h flags.h toplev.h output.h \ |
| $(CPPLIB_H) $(EXPR_H) $(TM_P_H) |
| c-ppoutput.o : c-ppoutput.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(C_COMMON_H) $(TREE_H) $(CPPLIB_H) cpphash.h $(TM_P_H) c-pragma.h |
| c-objc-common.o : c-objc-common.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(C_TREE_H) $(RTL_H) insn-config.h $(INTEGRATE_H) $(EXPR_H) $(C_TREE_H) \ |
| flags.h toplev.h tree-inline.h $(DIAGNOSTIC_H) $(VARRAY_H) \ |
| langhooks.h $(GGC_H) $(TARGET_H) cgraph.h |
| c-aux-info.o : c-aux-info.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(C_TREE_H) flags.h toplev.h |
| c-convert.o : c-convert.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| flags.h toplev.h $(C_COMMON_H) real.h |
| c-pragma.o: c-pragma.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| function.h c-pragma.h toplev.h output.h $(GGC_H) $(TM_P_H) $(C_COMMON_H) gt-c-pragma.h |
| graph.o: graph.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h flags.h output.h \ |
| $(RTL_H) function.h hard-reg-set.h $(BASIC_BLOCK_H) graph.h |
| sbitmap.o: sbitmap.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \ |
| hard-reg-set.h $(BASIC_BLOCK_H) |
| |
| COLLECT2_OBJS = collect2.o tlink.o intl.o version.o |
| COLLECT2_LIBS = @COLLECT2_LIBS@ |
| collect2$(exeext): $(COLLECT2_OBJS) $(LIBDEPS) |
| # Don't try modifying collect2 (aka ld) in place--it might be linking this. |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o T$@ \ |
| $(COLLECT2_OBJS) $(LIBS) $(COLLECT2_LIBS) |
| mv -f T$@ $@ |
| |
| collect2.o : collect2.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) gstab.h intl.h \ |
| $(OBSTACK_H) $(DEMANGLE_H) collect2.h version.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -DTARGET_MACHINE=\"$(target_noncanonical)\" \ |
| -c $(srcdir)/collect2.c $(OUTPUT_OPTION) |
| |
| tlink.o: tlink.c $(DEMANGLE_H) $(HASHTAB_H) $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(OBSTACK_H) collect2.h intl.h |
| |
| # A file used by all variants of C. |
| |
| c-common.o : c-common.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(OBSTACK_H) $(C_COMMON_H) flags.h toplev.h output.h c-pragma.h intl.h \ |
| $(GGC_H) $(EXPR_H) $(TM_P_H) builtin-types.def builtin-attrs.def \ |
| $(DIAGNOSTIC_H) gt-c-common.h langhooks.h varray.h $(RTL_H) \ |
| $(TARGET_H) $(C_TREE_H) |
| c-pretty-print.o : c-pretty-print.c $(C_PRETTY_PRINT_H) \ |
| $(C_COMMON_H) $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) real.h |
| |
| c-opts.o : c-opts.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| c-pragma.h flags.h toplev.h langhooks.h tree-inline.h $(DIAGNOSTIC_H) \ |
| intl.h debug.h $(C_COMMON_H) opts.h options.h $(PARAMS_H) |
| $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| $< $(OUTPUT_OPTION) @TARGET_SYSTEM_ROOT_DEFINE@ |
| |
| c-cppbuiltin.o : c-cppbuiltin.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(TREE_H) $(C_COMMON_H) c-pragma.h flags.h toplev.h langhooks.h \ |
| output.h except.h real.h $(TM_P_H) |
| |
| # A file used by all variants of C and some other languages. |
| |
| attribs.o : attribs.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) flags.h \ |
| toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) $(EXPR_H) $(TM_P_H) \ |
| builtin-types.def $(TARGET_H) langhooks.h |
| |
| c-format.o : c-format.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) langhooks.h \ |
| $(C_COMMON_H) flags.h toplev.h intl.h $(DIAGNOSTIC_H) |
| |
| c-semantics.o : c-semantics.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(C_TREE_H) flags.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \ |
| $(EXPR_H) $(PREDICT_H) tree-inline.h |
| |
| c-dump.o : c-dump.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(C_TREE_H) tree-dump.h |
| |
| c-pch.o : c-pch.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(CPPLIB_H) $(TREE_H) \ |
| $(C_COMMON_H) output.h toplev.h c-pragma.h $(GGC_H) debug.h \ |
| langhooks.h flags.h hosthooks.h version.h $(TARGET_H) |
| $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -DHOST_MACHINE=\"$(host)\" -DTARGET_MACHINE=\"$(target)\" \ |
| $< $(OUTPUT_OPTION) |
| |
| # Language-independent files. |
| |
| DRIVER_DEFINES = \ |
| -DSTANDARD_STARTFILE_PREFIX=\"$(unlibsubdir)/\" \ |
| -DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc/\" \ |
| -DSTANDARD_LIBEXEC_PREFIX=\"$(libexecdir)/gcc/\" \ |
| -DDEFAULT_TARGET_VERSION=\"$(version)\" \ |
| -DDEFAULT_TARGET_MACHINE=\"$(target_noncanonical)\" \ |
| -DSTANDARD_BINDIR_PREFIX=\"$(bindir)/\" \ |
| -DTOOLDIR_BASE_PREFIX=\"$(unlibsubdir)/../\" \ |
| @TARGET_SYSTEM_ROOT_DEFINE@ \ |
| $(VALGRIND_DRIVER_DEFINES) \ |
| `test "X$${SHLIB_LINK}" = "X" || test "@enable_shared@" != "yes" || echo "-DENABLE_SHARED_LIBGCC"` \ |
| `test "X$${SHLIB_MULTILIB}" = "X" || echo "-DNO_SHARED_LIBGCC_MULTILIB"` |
| |
| gcc.o: gcc.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) intl.h multilib.h \ |
| Makefile $(lang_specs_files) specs.h prefix.h $(GCC_H) |
| (SHLIB_LINK='$(SHLIB_LINK)' \ |
| SHLIB_MULTILIB='$(SHLIB_MULTILIB)'; \ |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| $(DRIVER_DEFINES) \ |
| -c $(srcdir)/gcc.c $(OUTPUT_OPTION)) |
| |
| gccspec.o: gccspec.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(GCC_H) |
| (SHLIB_LINK='$(SHLIB_LINK)' \ |
| SHLIB_MULTILIB='$(SHLIB_MULTILIB)'; \ |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| $(DRIVER_DEFINES) \ |
| -c $(srcdir)/gccspec.c $(OUTPUT_OPTION)) |
| |
| cppspec.o: cppspec.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(GCC_H) |
| |
| tree-check.h: s-check ; @true |
| s-check : gencheck$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./gencheck$(build_exeext) > tmp-check.h |
| $(SHELL) $(srcdir)/move-if-change tmp-check.h tree-check.h |
| $(STAMP) s-check |
| |
| gencheck$(build_exeext) : gencheck.o $(BUILD_LIBDEPS) |
| $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \ |
| gencheck.o $(BUILD_LIBS) |
| |
| gencheck.o : gencheck.c gencheck.h tree.def $(BCONFIG_H) $(SYSTEM_H) \ |
| coretypes.h $(GTM_H) $(lang_tree_files) |
| |
| gencheck.h : s-gencheck ; @true |
| s-gencheck : Makefile |
| ltf="$(lang_tree_files)"; for f in $$ltf; do \ |
| echo "#include \"$$f\""; \ |
| done | sed 's|$(srcdir)/||' > tmp-gencheck.h |
| $(SHELL) $(srcdir)/move-if-change tmp-gencheck.h gencheck.h |
| $(STAMP) s-gencheck |
| |
| specs.h : s-specs ; @true |
| s-specs : Makefile |
| lsf="$(lang_specs_files)"; for f in $$lsf; do \ |
| echo "#include \"$$f\""; \ |
| done | sed 's|$(srcdir)/||' > tmp-specs.h |
| $(SHELL) $(srcdir)/move-if-change tmp-specs.h specs.h |
| $(STAMP) s-specs |
| |
| options.c: $(lang_opt_files) $(srcdir)/opts.sh options.h intl.h |
| |
| options.h: $(lang_opt_files) $(srcdir)/opts.sh Makefile |
| AWK=$(AWK) $(SHELL) $(srcdir)/opts.sh \ |
| '$(SHELL) $(srcdir)/move-if-change' \ |
| options.c options.h $(lang_opt_files) |
| |
| dumpvers: dumpvers.c |
| |
| version.o: version.c version.h |
| |
| gtype-desc.o: gtype-desc.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) varray.h \ |
| $(HASHTAB_H) $(TREE_H) $(RTL_H) function.h insn-config.h $(EXPR_H) $(OPTABS_H) \ |
| libfuncs.h debug.h $(GGC_H) bitmap.h $(BASIC_BLOCK_H) hard-reg-set.h \ |
| cselib.h insn-addr.h |
| |
| ggc-common.o: ggc-common.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(GGC_H) \ |
| $(HASHTAB_H) toplev.h $(PARAMS_H) hosthooks.h |
| |
| ggc-simple.o: ggc-simple.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| flags.h $(GGC_H) varray.h $(TIMEVAR_H) $(TM_P_H) $(PARAMS_H) |
| |
| ggc-page.o: ggc-page.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| flags.h toplev.h $(GGC_H) $(TIMEVAR_H) $(TM_P_H) $(PARAMS_H) |
| |
| ggc-zone.o: ggc-zone.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| flags.h toplev.h $(GGC_H) $(TIMEVAR_H) $(TM_P_H) $(PARAMS_H) |
| |
| stringpool.o: stringpool.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(TREE_H) $(GGC_H) gt-stringpool.h |
| |
| ggc-none.o: ggc-none.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) $(GGC_H) |
| $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION) |
| |
| prefix.o: prefix.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) Makefile prefix.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -DPREFIX=\"$(prefix)\" \ |
| -c $(srcdir)/prefix.c $(OUTPUT_OPTION) |
| |
| convert.o: convert.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) flags.h \ |
| convert.h toplev.h langhooks.h |
| |
| langhooks.o : langhooks.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) toplev.h \ |
| tree-inline.h $(RTL_H) insn-config.h $(INTEGRATE_H) langhooks.h \ |
| $(LANGHOOKS_DEF_H) flags.h $(GGC_H) gt-langhooks.h diagnostic.h |
| tree.o : tree.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) flags.h function.h \ |
| toplev.h $(GGC_H) $(HASHTAB_H) $(TARGET_H) output.h $(TM_P_H) langhooks.h \ |
| real.h gt-tree.h |
| tree-dump.o: tree-dump.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(C_TREE_H) flags.h langhooks.h toplev.h output.h c-pragma.h $(RTL_H) $(GGC_H) \ |
| $(EXPR_H) $(SPLAY_TREE_H) tree-dump.h |
| tree-inline.o : tree-inline.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(TREE_H) $(RTL_H) $(EXPR_H) flags.h $(PARAMS_H) input.h insn-config.h \ |
| $(INTEGRATE_H) $(VARRAY_H) $(HASHTAB_H) $(SPLAY_TREE_H) toplev.h \ |
| langhooks.h $(C_COMMON_H) tree-inline.h cgraph.h intl.h |
| tree-optimize.o : tree-optimize.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(TREE_H) toplev.h langhooks.h cgraph.h $(TIMEVAR_H) function.h $(GGC_H) |
| |
| print-tree.o : print-tree.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(GGC_H) langhooks.h real.h |
| stor-layout.o : stor-layout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| flags.h function.h $(EXPR_H) $(RTL_H) toplev.h $(GGC_H) $(TM_P_H) $(TARGET_H) \ |
| langhooks.h |
| fold-const.o : fold-const.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| flags.h real.h toplev.h $(HASHTAB_H) $(EXPR_H) $(RTL_H) $(GGC_H) $(TM_P_H) langhooks.h |
| diagnostic.o : diagnostic.c $(DIAGNOSTIC_H) real.h \ |
| $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(TM_P_H) flags.h $(GGC_H) \ |
| input.h toplev.h intl.h langhooks.h $(LANGHOOKS_DEF_H) |
| opts.o : opts.c opts.h options.h toplev.h $(CONFIG_H) $(SYSTEM_H) \ |
| coretypes.h $(TREE_H) $(TM_H) langhooks.h $(GGC_H) $(RTL_H) \ |
| output.h $(DIAGNOSTIC_H) $(TM_P_H) $(INSN_ATTR_H) intl.h |
| targhooks.o : targhooks.c targhooks.h $(CONFIG_H) $(SYSTEM_H) \ |
| coretypes.h $(TREE_H) $(TM_H) $(RTL_H) $(TM_P_H) function.h \ |
| output.h toplev.h |
| |
| toplev.o : toplev.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \ |
| function.h flags.h xcoffout.h input.h $(INSN_ATTR_H) output.h $(DIAGNOSTIC_H) \ |
| debug.h insn-config.h intl.h $(RECOG_H) Makefile toplev.h \ |
| dwarf2out.h sdbout.h dbxout.h $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) \ |
| graph.h $(LOOP_H) except.h $(REGS_H) $(TIMEVAR_H) value-prof.h \ |
| $(PARAMS_H) $(TM_P_H) reload.h dwarf2asm.h $(TARGET_H) \ |
| langhooks.h insn-flags.h cfglayout.h real.h cfgloop.h \ |
| hosthooks.h $(LANGHOOKS_DEF_H) cgraph.h $(COVERAGE_H) alloc-pool.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -DTARGET_NAME=\"$(target_noncanonical)\" \ |
| -c $(srcdir)/toplev.c $(OUTPUT_OPTION) |
| main.o : main.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h |
| |
| host-default.o : host-default.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \ |
| hosthooks.h hosthooks-def.h |
| |
| rtl-error.o: rtl-error.c $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(INSN_ATTR_H) \ |
| insn-config.h input.h toplev.h intl.h $(DIAGNOSTIC_H) $(CONFIG_H) |
| |
| rtl.o : rtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) $(RTL_H) real.h \ |
| $(GGC_H) errors.h |
| $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION) |
| |
| print-rtl.o : print-rtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(RTL_H) $(TREE_H) hard-reg-set.h $(BASIC_BLOCK_H) real.h $(TM_P_H) |
| rtlanal.o : rtlanal.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h \ |
| $(RTL_H) hard-reg-set.h $(TM_P_H) insn-config.h $(RECOG_H) real.h flags.h \ |
| $(BASIC_BLOCK_H) |
| |
| errors.o : errors.c $(CONFIG_H) $(SYSTEM_H) errors.h |
| $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION) |
| |
| varasm.o : varasm.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \ |
| flags.h function.h $(EXPR_H) hard-reg-set.h $(REGS_H) \ |
| output.h c-pragma.h toplev.h xcoffout.h debug.h $(GGC_H) $(TM_P_H) \ |
| $(HASHTAB_H) $(TARGET_H) langhooks.h gt-varasm.h real.h |
| function.o : function.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| flags.h function.h $(EXPR_H) $(OPTABS_H) libfuncs.h $(REGS_H) hard-reg-set.h \ |
| insn-config.h $(RECOG_H) output.h toplev.h except.h $(HASHTAB_H) $(GGC_H) \ |
| $(TM_P_H) langhooks.h gt-function.h $(TARGET_H) |
| stmt.o : stmt.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) flags.h \ |
| function.h insn-config.h hard-reg-set.h $(EXPR_H) libfuncs.h except.h \ |
| $(LOOP_H) $(RECOG_H) toplev.h output.h varray.h $(GGC_H) $(TM_P_H) \ |
| langhooks.h $(PREDICT_H) gt-stmt.h $(OPTABS_H) $(TARGET_H) |
| except.o : except.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| $(TREE_H) flags.h except.h function.h $(EXPR_H) libfuncs.h $(INTEGRATE_H) \ |
| langhooks.h insn-config.h hard-reg-set.h $(BASIC_BLOCK_H) output.h \ |
| dwarf2asm.h dwarf2out.h toplev.h $(HASHTAB_H) intl.h $(GGC_H) \ |
| gt-except.h cgraph.h |
| expr.o : expr.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) flags.h \ |
| function.h $(REGS_H) $(EXPR_H) $(OPTABS_H) libfuncs.h $(INSN_ATTR_H) insn-config.h \ |
| $(RECOG_H) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \ |
| except.h reload.h $(GGC_H) langhooks.h intl.h $(TM_P_H) real.h $(TARGET_H) |
| dojump.o : dojump.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| flags.h function.h $(EXPR_H) $(OPTABS_H) $(INSN_ATTR_H) insn-config.h \ |
| langhooks.h |
| builtins.o : builtins.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H)\ |
| flags.h $(TARGET_H) function.h $(REGS_H) $(EXPR_H) $(OPTABS_H) insn-config.h \ |
| $(RECOG_H) output.h typeclass.h hard-reg-set.h toplev.h hard-reg-set.h \ |
| except.h $(TM_P_H) $(PREDICT_H) libfuncs.h real.h langhooks.h |
| calls.o : calls.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) flags.h \ |
| $(EXPR_H) $(OPTABS_H) langhooks.h $(TARGET_H) \ |
| libfuncs.h $(REGS_H) toplev.h output.h function.h $(TIMEVAR_H) $(TM_P_H) cgraph.h except.h |
| expmed.o : expmed.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| flags.h insn-config.h $(EXPR_H) $(OPTABS_H) $(RECOG_H) real.h \ |
| toplev.h $(TM_P_H) langhooks.h |
| explow.o : explow.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| flags.h hard-reg-set.h insn-config.h $(EXPR_H) $(OPTABS_H) $(RECOG_H) \ |
| toplev.h function.h $(GGC_H) $(TM_P_H) langhooks.h gt-explow.h |
| optabs.o : optabs.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| flags.h insn-config.h $(EXPR_H) $(OPTABS_H) libfuncs.h $(RECOG_H) reload.h \ |
| toplev.h $(GGC_H) real.h $(TM_P_H) except.h gt-optabs.h $(BASIC_BLOCK_H) \ |
| $(TARGET_H) |
| dbxout.o : dbxout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \ |
| flags.h $(REGS_H) debug.h $(TM_P_H) $(TARGET_H) function.h langhooks.h \ |
| insn-config.h reload.h gstab.h xcoffout.h output.h dbxout.h toplev.h \ |
| $(GGC_H) gt-dbxout.h |
| debug.o : debug.c debug.h $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) |
| sdbout.o : sdbout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \ |
| flags.h function.h $(EXPR_H) output.h hard-reg-set.h $(REGS_H) real.h \ |
| insn-config.h xcoffout.h c-pragma.h $(GGC_H) $(TARGET_H) \ |
| sdbout.h toplev.h $(TM_P_H) except.h debug.h langhooks.h gt-sdbout.h |
| dwarf2out.o : dwarf2out.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(RTL_H) dwarf2.h debug.h flags.h insn-config.h reload.h output.h $(DIAGNOSTIC_H) real.h \ |
| hard-reg-set.h $(REGS_H) $(EXPR_H) libfuncs.h toplev.h dwarf2out.h varray.h \ |
| $(GGC_H) except.h dwarf2asm.h $(TM_P_H) langhooks.h $(HASHTAB_H) \ |
| gt-dwarf2out.h $(TARGET_H) cgraph.h |
| dwarf2asm.o : dwarf2asm.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) flags.h $(RTL_H) \ |
| $(TREE_H) output.h dwarf2asm.h $(TM_P_H) $(GGC_H) gt-dwarf2asm.h |
| vmsdbgout.o : vmsdbgout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| $(RTL_H) flags.h output.h vmsdbg.h debug.h langhooks.h function.h $(TARGET_H) |
| xcoffout.o : xcoffout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) $(RTL_H) \ |
| xcoffout.h flags.h toplev.h output.h dbxout.h $(GGC_H) $(TARGET_H) |
| emit-rtl.o : emit-rtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| flags.h function.h $(REGS_H) insn-config.h $(RECOG_H) real.h $(GGC_H) \ |
| $(EXPR_H) $(OBSTACK_H) hard-reg-set.h bitmap.h toplev.h \ |
| $(HASHTAB_H) $(TM_P_H) debug.h langhooks.h gt-emit-rtl.h |
| real.o : real.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) toplev.h $(TM_P_H) |
| integrate.o : integrate.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| flags.h debug.h $(INTEGRATE_H) insn-config.h $(EXPR_H) real.h $(REGS_H) \ |
| intl.h function.h output.h $(RECOG_H) except.h toplev.h $(LOOP_H) \ |
| $(PARAMS_H) $(TM_P_H) $(TARGET_H) langhooks.h gt-integrate.h |
| jump.o : jump.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \ |
| hard-reg-set.h $(REGS_H) insn-config.h $(RECOG_H) $(EXPR_H) real.h except.h function.h \ |
| toplev.h $(INSN_ATTR_H) $(TM_P_H) reload.h $(PREDICT_H) $(TIMEVAR_H) \ |
| $(DIAGNOSTIC_H) |
| |
| simplify-rtx.o : simplify-rtx.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| $(REGS_H) hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \ |
| output.h function.h $(GGC_H) $(OBSTACK_H) $(TM_P_H) $(TREE_H) $(TARGET_H) |
| cgraph.o : cgraph.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| langhooks.h toplev.h flags.h $(GGC_H) $(TARGET_H) cgraph.h gt-cgraph.h \ |
| output.h intl.h |
| cgraphunit.o : cgraphunit.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TREE_H) \ |
| langhooks.h tree-inline.h toplev.h flags.h $(GGC_H) $(TARGET_H) cgraph.h intl.h \ |
| function.h |
| coverage.o : coverage.c gcov-io.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \ |
| $(TM_H) $(RTL_H) $(TREE_H) flags.h output.h $(REGS_H) $(EXPR_H) function.h \ |
| toplev.h $(GGC_H) $(TARGET_H) langhooks.h $(COVERAGE_H) libfuncs.h \ |
| gt-coverage.h $(HASHTAB_H) |
| cselib.o : cselib.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \ |
| hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \ |
| output.h function.h cselib.h $(GGC_H) $(TM_P_H) gt-cselib.h $(PARAMS_H) |
| cse.o : cse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \ |
| hard-reg-set.h flags.h real.h insn-config.h $(RECOG_H) $(EXPR_H) toplev.h \ |
| output.h function.h $(BASIC_BLOCK_H) $(GGC_H) $(TM_P_H) $(TIMEVAR_H) \ |
| except.h $(TARGET_H) $(PARAMS_H) |
| web.o : web.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \ |
| hard-reg-set.h flags.h $(BASIC_BLOCK_H) function.h output.h toplev.h df.h |
| gcse.o : gcse.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \ |
| hard-reg-set.h flags.h real.h insn-config.h $(GGC_H) $(RECOG_H) $(EXPR_H) \ |
| $(BASIC_BLOCK_H) function.h output.h toplev.h $(TM_P_H) $(PARAMS_H) \ |
| except.h gt-gcse.h $(TREE_H) cselib.h |
| sibcall.o : sibcall.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \ |
| function.h hard-reg-set.h flags.h insn-config.h $(RECOG_H) $(BASIC_BLOCK_H) |
| resource.o : resource.c $(CONFIG_H) $(RTL_H) hard-reg-set.h $(SYSTEM_H) coretypes.h \ |
| $(TM_H) $(BASIC_BLOCK_H) $(REGS_H) flags.h output.h resource.h function.h toplev.h \ |
| $(INSN_ATTR_H) except.h $(PARAMS_H) $(TM_P_H) |
| lcm.o : lcm.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(REGS_H) \ |
| hard-reg-set.h flags.h real.h insn-config.h $(INSN_ATTR_H) $(RECOG_H) $(EXPR_H) \ |
| $(BASIC_BLOCK_H) $(TM_P_H) df.h function.h |
| df.o : df.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| insn-config.h $(RECOG_H) function.h $(REGS_H) alloc-pool.h hard-reg-set.h \ |
| $(BASIC_BLOCK_H) df.h $(FIBHEAP_H) |
| conflict.o : conflict.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(OBSTACK_H) \ |
| $(HASHTAB_H) $(RTL_H) hard-reg-set.h $(BASIC_BLOCK_H) |
| profile.o : profile.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| $(TREE_H) flags.h output.h $(REGS_H) $(EXPR_H) function.h \ |
| toplev.h $(BASIC_BLOCK_H) $(COVERAGE_H) $(TREE_H) value-prof.h |
| value-prof.o : value-prof.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| $(BASIC_BLOCK_H) hard-reg-set.h value-prof.h $(EXPR_H) output.h flags.h \ |
| $(RECOG_H) insn-config.h $(OPTABS_H) $(REGS_H) |
| loop.o : loop.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h $(LOOP_H) \ |
| insn-config.h $(REGS_H) hard-reg-set.h $(RECOG_H) $(EXPR_H) \ |
| real.h $(PREDICT_H) $(BASIC_BLOCK_H) function.h cfgloop.h \ |
| toplev.h varray.h except.h cselib.h $(OPTABS_H) $(TM_P_H) $(GGC_H) |
| doloop.o : doloop.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \ |
| $(LOOP_H) $(EXPR_H) hard-reg-set.h $(BASIC_BLOCK_H) $(TM_P_H) toplev.h \ |
| cfgloop.h |
| unroll.o : unroll.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) insn-config.h \ |
| function.h $(INTEGRATE_H) $(REGS_H) $(RECOG_H) flags.h $(EXPR_H) $(LOOP_H) toplev.h \ |
| hard-reg-set.h varray.h $(BASIC_BLOCK_H) $(TM_P_H) $(PREDICT_H) $(PARAMS_H) \ |
| cfgloop.h |
| alloc-pool.o : alloc-pool.c $(CONFIG_H) $(SYSTEM_H) alloc-pool.h $(HASHTAB_H) |
| flow.o : flow.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| flags.h insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h \ |
| $(RECOG_H) function.h except.h $(EXPR_H) $(GGC_H) $(TM_P_H) |
| cfg.o : cfg.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h insn-config.h \ |
| $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \ |
| function.h except.h $(GGC_H) $(TM_P_H) alloc-pool.h |
| cfghooks.o: cfghooks.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| $(BASIC_BLOCK_H) cfglayout.h |
| cfgrtl.o : cfgrtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \ |
| insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \ |
| function.h except.h $(GGC_H) $(TM_P_H) insn-config.h $(EXPR_H) |
| cfganal.o : cfganal.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| $(BASIC_BLOCK_H) hard-reg-set.h insn-config.h $(RECOG_H) $(GGC_H) $(TM_P_H) |
| cfgbuild.o : cfgbuild.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \ |
| insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h $(RECOG_H) \ |
| function.h except.h $(GGC_H) |
| cfgcleanup.o : cfgcleanup.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(RTL_H) $(TIMEVAR_H) $(BASIC_BLOCK_H) hard-reg-set.h output.h flags.h \ |
| $(RECOG_H) toplev.h $(GGC_H) insn-config.h cselib.h $(TARGET_H) $(TM_P_H) \ |
| $(PARAMS_H) |
| cfgloop.o : cfgloop.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) coretypes.h $(TM_H) \ |
| $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h flags.h |
| cfgloopanal.o : cfgloopanal.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) \ |
| $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h $(EXPR_H) coretypes.h $(TM_H) |
| cfgloopmanip.o : cfgloopmanip.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) \ |
| $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h cfglayout.h output.h coretypes.h $(TM_H) |
| loop-init.o : loop-init.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) \ |
| $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h cfglayout.h \ |
| coretypes.h $(TM_H) |
| loop-unswitch.o : loop-unswitch.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TM_H) \ |
| $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h cfglayout.h $(PARAMS_H) \ |
| output.h $(EXPR_H) coretypes.h $(TM_H) |
| loop-unroll.o: loop-unroll.c $(CONFIG_H) $(SYSTEM_H) $(RTL_H) $(TM_H) \ |
| $(BASIC_BLOCK_H) hard-reg-set.h cfgloop.h cfglayout.h $(PARAMS_H) \ |
| output.h $(EXPR_H) coretypes.h $(TM_H) |
| dominance.o : dominance.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| hard-reg-set.h $(BASIC_BLOCK_H) et-forest.h |
| et-forest.o : et-forest.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) et-forest.h alloc-pool.h |
| combine.o : combine.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \ |
| function.h insn-config.h $(INSN_ATTR_H) $(REGS_H) $(EXPR_H) \ |
| $(BASIC_BLOCK_H) $(RECOG_H) real.h hard-reg-set.h toplev.h $(TM_P_H) $(TREE_H) $(TARGET_H) |
| regclass.o : regclass.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| hard-reg-set.h flags.h $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(RECOG_H) reload.h \ |
| real.h toplev.h function.h output.h $(GGC_H) $(TM_P_H) $(EXPR_H) $(TIMEVAR_H) |
| local-alloc.o : local-alloc.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| flags.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h $(RECOG_H) \ |
| output.h function.h $(INSN_ATTR_H) toplev.h except.h $(TM_P_H) |
| bitmap.o : bitmap.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) $(RTL_H) flags.h \ |
| $(BASIC_BLOCK_H) $(REGS_H) $(GGC_H) |
| $(CC) -c $(ALL_CFLAGS) -DGENERATOR_FILE $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION) |
| global.o : global.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \ |
| reload.h function.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h insn-config.h output.h \ |
| toplev.h $(TM_P_H) |
| varray.o : varray.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) varray.h $(GGC_H) errors.h |
| ra.o : ra.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TM_P_H) insn-config.h \ |
| $(RECOG_H) $(INTEGRATE_H) function.h $(REGS_H) $(OBSTACK_H) hard-reg-set.h \ |
| $(BASIC_BLOCK_H) df.h $(EXPR_H) output.h toplev.h flags.h reload.h ra.h |
| ra-build.o : ra-build.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TM_P_H) \ |
| insn-config.h $(RECOG_H) function.h $(REGS_H) hard-reg-set.h \ |
| $(BASIC_BLOCK_H) df.h output.h $(GGC_H) ra.h gt-ra-build.h reload.h |
| ra-colorize.o : ra-colorize.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| $(TM_P_H) function.h $(REGS_H) hard-reg-set.h $(BASIC_BLOCK_H) df.h output.h ra.h |
| ra-debug.o : ra-debug.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| insn-config.h $(RECOG_H) function.h hard-reg-set.h $(BASIC_BLOCK_H) df.h output.h \ |
| ra.h $(TM_P_H) |
| ra-rewrite.o : ra-rewrite.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| $(TM_P_H) function.h $(REGS_H) hard-reg-set.h $(BASIC_BLOCK_H) df.h $(EXPR_H) \ |
| output.h except.h ra.h reload.h insn-config.h |
| reload.o : reload.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h output.h \ |
| $(EXPR_H) $(OPTABS_H) reload.h $(RECOG_H) hard-reg-set.h insn-config.h \ |
| $(REGS_H) function.h real.h toplev.h $(TM_P_H) $(PARAMS_H) |
| reload1.o : reload1.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) real.h flags.h \ |
| $(EXPR_H) $(OPTABS_H) reload.h $(REGS_H) hard-reg-set.h insn-config.h \ |
| $(BASIC_BLOCK_H) $(RECOG_H) output.h function.h toplev.h $(TM_P_H) \ |
| except.h $(TREE_H) |
| postreload.o : postreload.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) real.h flags.h \ |
| $(EXPR_H) $(OPTABS_H) reload.h $(REGS_H) hard-reg-set.h insn-config.h \ |
| $(BASIC_BLOCK_H) $(RECOG_H) output.h function.h toplev.h cselib.h $(TM_P_H) \ |
| except.h $(TREE_H) |
| caller-save.o : caller-save.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| flags.h $(REGS_H) hard-reg-set.h insn-config.h $(BASIC_BLOCK_H) function.h \ |
| $(RECOG_H) reload.h $(EXPR_H) toplev.h $(TM_P_H) |
| bt-load.o : bt-load.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(BASIC_BLOCK_H) $(RTL_H) hard-reg-set.h $(REGS_H) $(OBSTACK_H) $(TM_P_H) \ |
| $(FIBHEAP_H) output.h $(TARGET_H) $(EXPR_H) flags.h $(INSN_ATTR_H) |
| reorg.o : reorg.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) conditions.h \ |
| hard-reg-set.h $(BASIC_BLOCK_H) $(REGS_H) insn-config.h $(INSN_ATTR_H) except.h \ |
| $(RECOG_H) function.h flags.h output.h $(EXPR_H) toplev.h $(PARAMS_H) $(TM_P_H) |
| alias.o : alias.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) flags.h \ |
| hard-reg-set.h $(BASIC_BLOCK_H) $(REGS_H) toplev.h output.h $(EXPR_H) \ |
| $(GGC_H) function.h cselib.h $(TREE_H) $(TM_P_H) langhooks.h $(TARGET_H) \ |
| gt-alias.h $(TIMEVAR_H) cgraph.h |
| regmove.o : regmove.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) insn-config.h \ |
| $(RECOG_H) output.h $(REGS_H) hard-reg-set.h flags.h function.h \ |
| $(EXPR_H) $(BASIC_BLOCK_H) toplev.h $(TM_P_H) except.h reload.h |
| haifa-sched.o : haifa-sched.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| sched-int.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \ |
| $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H) $(TARGET_H) |
| sched-deps.o : sched-deps.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| sched-int.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \ |
| $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h cselib.h $(PARAMS_H) $(TM_P_H) |
| sched-rgn.o : sched-rgn.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| sched-int.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \ |
| $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H) $(TARGET_H) |
| sched-ebb.o : sched-ebb.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| sched-int.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h function.h \ |
| $(INSN_ATTR_H) toplev.h $(RECOG_H) except.h $(TM_P_H) $(PARAMS_H) |
| sched-vis.o : sched-vis.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| sched-int.h hard-reg-set.h $(BASIC_BLOCK_H) $(INSN_ATTR_H) $(REGS_H) $(TM_P_H) \ |
| $(TARGET_H) real.h |
| final.o : final.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| flags.h intl.h $(REGS_H) $(RECOG_H) conditions.h insn-config.h $(INSN_ATTR_H) \ |
| function.h real.h output.h hard-reg-set.h except.h debug.h xcoffout.h \ |
| toplev.h reload.h dwarf2out.h $(BASIC_BLOCK_H) $(TM_P_H) $(TARGET_H) \ |
| $(EXPR_H) |
| recog.o : recog.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) function.h \ |
| $(BASIC_BLOCK_H) $(REGS_H) $(RECOG_H) $(EXPR_H) hard-reg-set.h flags.h insn-config.h \ |
| $(INSN_ATTR_H) real.h toplev.h output.h reload.h $(TM_P_H) |
| reg-stack.o : reg-stack.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| $(RECOG_H) $(REGS_H) hard-reg-set.h flags.h insn-config.h toplev.h reload.h \ |
| varray.h function.h $(TM_P_H) $(GGC_H) gt-reg-stack.h |
| sreal.o: sreal.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) sreal.h |
| predict.o: predict.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| flags.h insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h toplev.h \ |
| $(RECOG_H) function.h except.h $(EXPR_H) $(TM_P_H) $(PREDICT_H) sreal.h \ |
| $(PARAMS_H) $(TARGET_H) cfgloop.h $(COVERAGE_H) |
| lists.o: lists.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) toplev.h $(RTL_H) $(GGC_H) |
| bb-reorder.o : bb-reorder.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(RTL_H) $(BASIC_BLOCK_H) flags.h timevar.h output.h cfglayout.h $(FIBHEAP_H) \ |
| $(TARGET_H) |
| tracer.o : tracer.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) $(TREE_H) \ |
| $(BASIC_BLOCK_H) hard-reg-set.h output.h cfglayout.h flags.h timevar.h \ |
| $(PARAMS_H) $(COVERAGE_H) |
| cfglayout.o : cfglayout.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(RTL_H) $(TREE_H) insn-config.h $(BASIC_BLOCK_H) hard-reg-set.h output.h \ |
| function.h cfglayout.h cfgloop.h $(TARGET_H) gt-cfglayout.h $(GGC_H) |
| timevar.o : timevar.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(TIMEVAR_H) flags.h \ |
| intl.h toplev.h |
| regrename.o : regrename.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| insn-config.h $(BASIC_BLOCK_H) $(REGS_H) hard-reg-set.h output.h $(RECOG_H) function.h \ |
| resource.h $(OBSTACK_H) flags.h $(TM_P_H) |
| ifcvt.o : ifcvt.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| $(REGS_H) toplev.h flags.h insn-config.h function.h $(RECOG_H) $(TARGET_H) \ |
| $(BASIC_BLOCK_H) $(EXPR_H) output.h except.h $(TM_P_H) real.h $(OPTABS_H) \ |
| cfgloop.h |
| params.o : params.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(PARAMS_H) toplev.h |
| hooks.o: hooks.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(HOOKS_H) |
| pretty-print.o: $(CONFIG_H) $(SYSTEM_H) pretty-print.c $(PRETTY_PRINT_H) |
| |
| $(out_object_file): $(out_file) $(CONFIG_H) coretypes.h $(TM_H) $(TREE_H) $(GGC_H) \ |
| $(RTL_H) $(REGS_H) hard-reg-set.h real.h insn-config.h conditions.h \ |
| output.h $(INSN_ATTR_H) $(SYSTEM_H) toplev.h $(TARGET_H) libfuncs.h \ |
| $(TARGET_DEF_H) function.h sched-int.h $(TM_P_H) $(EXPR_H) $(OPTABS_H) \ |
| langhooks.h |
| $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| $(out_file) $(OUTPUT_OPTION) |
| |
| # Build auxiliary files that support ecoff format. |
| mips-tfile: mips-tfile.o version.o $(LIBDEPS) |
| $(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tfile.o version.o $(LIBS) |
| |
| mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H) $(SYSTEM_H) coretypes.h $(TM_H) version.h |
| |
| mips-tdump: mips-tdump.o version.o $(LIBDEPS) |
| $(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tdump.o version.o $(LIBS) |
| |
| mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H) $(SYSTEM_H) coretypes.h $(TM_H) version.h |
| |
| # FIXME: writing proper dependencies for this is a *LOT* of work. |
| libbackend.o : $(OBJS-common:.o=.c) $(out_file) \ |
| insn-config.h insn-flags.h insn-codes.h insn-constants.h \ |
| insn-attr.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -DTARGET_NAME=\"$(target_noncanonical)\" \ |
| -DLOCALEDIR=\"$(localedir)\" \ |
| -c $(filter %.c,$^) -o $@ |
| |
| # |
| # Generate header and source files from the machine description, |
| # and compile them. |
| |
| .PRECIOUS: insn-config.h insn-flags.h insn-codes.h insn-constants.h \ |
| insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \ |
| insn-attr.h insn-attrtab.c |
| |
| # The following pair of rules has this effect: |
| # genconfig is run only if the md has changed since genconfig was last run; |
| # but the file insn-config.h is touched only when its contents actually change. |
| |
| # Each of the other insn-* files is handled by a similar pair of rules. |
| |
| # This causes an anomaly in the results of make -n |
| # because insn-* is older than s-* |
| # and thus make -n thinks that insn-* will be updated |
| # and force recompilation of things that depend on it. |
| # We use move-if-change precisely to avoid such recompilation. |
| # But there is no way to teach make -n that it will be avoided. |
| |
| # Each of the insn-*.[ch] rules has a semicolon at the end, |
| # for otherwise the system Make on SunOS 4.1 never tries |
| # to recompile insn-*.o. To avoid problems and extra noise from |
| # versions of make which don't like empty commands (nothing after the |
| # trailing `;'), we call true for each. |
| |
| insn-config.h: s-config ; @true |
| s-config : $(md_file) genconfig$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genconfig$(build_exeext) $(md_file) > tmp-config.h |
| $(SHELL) $(srcdir)/move-if-change tmp-config.h insn-config.h |
| $(STAMP) s-config |
| |
| insn-conditions.c: s-conditions ; @true |
| s-conditions : $(md_file) genconditions$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genconditions$(build_exeext) $(md_file) > tmp-conditions.c |
| $(SHELL) $(srcdir)/move-if-change tmp-conditions.c insn-conditions.c |
| $(STAMP) s-conditions |
| |
| insn-conditions.o : insn-conditions.c $(CONFIG_H) $(SYSTEM_H) coretypes.h \ |
| $(GTM_H) $(RTL_H) $(TM_P_H) $(REGS_H) function.h $(RECOG_H) real.h output.h \ |
| flags.h hard-reg-set.h resource.h toplev.h reload.h gensupport.h \ |
| insn-constants.h |
| $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) insn-conditions.c |
| |
| dummy-conditions.o : dummy-conditions.c $(BCONFIG_H) $(SYSTEM_H) \ |
| coretypes.h $(GTM_H) gensupport.h |
| |
| insn-flags.h: s-flags ; @true |
| s-flags : $(md_file) genflags$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genflags$(build_exeext) $(md_file) > tmp-flags.h |
| $(SHELL) $(srcdir)/move-if-change tmp-flags.h insn-flags.h |
| $(STAMP) s-flags |
| |
| insn-codes.h: s-codes ; @true |
| s-codes : $(md_file) gencodes$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./gencodes$(build_exeext) $(md_file) > tmp-codes.h |
| $(SHELL) $(srcdir)/move-if-change tmp-codes.h insn-codes.h |
| $(STAMP) s-codes |
| |
| insn-constants.h: s-constants ; @true |
| s-constants : $(md_file) genconstants$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genconstants$(build_exeext) $(md_file) > tmp-constants.h |
| $(SHELL) $(srcdir)/move-if-change tmp-constants.h insn-constants.h |
| $(STAMP) s-constants |
| |
| insn-emit.o : insn-emit.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(RTL_H) $(EXPR_H) real.h output.h insn-config.h $(OPTABS_H) reload.h \ |
| $(RECOG_H) toplev.h function.h flags.h hard-reg-set.h resource.h $(TM_P_H) |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c \ |
| $(OUTPUT_OPTION) |
| |
| insn-emit.c: s-emit ; @true |
| s-emit : $(md_file) genemit$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genemit$(build_exeext) $(md_file) > tmp-emit.c |
| $(SHELL) $(srcdir)/move-if-change tmp-emit.c insn-emit.c |
| $(STAMP) s-emit |
| |
| insn-recog.o : insn-recog.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(RTL_H) insn-config.h $(RECOG_H) real.h output.h flags.h function.h \ |
| hard-reg-set.h resource.h $(TM_P_H) toplev.h reload.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-recog.c \ |
| $(OUTPUT_OPTION) |
| |
| insn-recog.c: s-recog ; @true |
| s-recog : $(md_file) genrecog$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genrecog$(build_exeext) $(md_file) > tmp-recog.c |
| $(SHELL) $(srcdir)/move-if-change tmp-recog.c insn-recog.c |
| $(STAMP) s-recog |
| |
| insn-opinit.o : insn-opinit.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(RTL_H) insn-config.h flags.h $(RECOG_H) $(EXPR_H) $(OPTABS_H) reload.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-opinit.c \ |
| $(OUTPUT_OPTION) |
| |
| insn-opinit.c: s-opinit ; @true |
| s-opinit : $(md_file) genopinit$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genopinit$(build_exeext) $(md_file) > tmp-opinit.c |
| $(SHELL) $(srcdir)/move-if-change tmp-opinit.c insn-opinit.c |
| $(STAMP) s-opinit |
| |
| insn-extract.o : insn-extract.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(RTL_H) toplev.h insn-config.h $(RECOG_H) |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-extract.c \ |
| $(OUTPUT_OPTION) |
| |
| insn-extract.c: s-extract ; @true |
| s-extract : $(md_file) genextract$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genextract$(build_exeext) $(md_file) > tmp-extract.c |
| $(SHELL) $(srcdir)/move-if-change tmp-extract.c insn-extract.c |
| $(STAMP) s-extract |
| |
| insn-peep.o : insn-peep.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(RTL_H) $(REGS_H) output.h real.h insn-config.h $(RECOG_H) except.h \ |
| function.h $(TM_P_H) |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-peep.c \ |
| $(OUTPUT_OPTION) |
| |
| insn-peep.c: s-peep ; @true |
| s-peep : $(md_file) genpeep$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genpeep$(build_exeext) $(md_file) > tmp-peep.c |
| $(SHELL) $(srcdir)/move-if-change tmp-peep.c insn-peep.c |
| $(STAMP) s-peep |
| |
| insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(RTL_H) $(REGS_H) real.h output.h $(INSN_ATTR_H) insn-config.h toplev.h \ |
| $(RECOG_H) $(TM_P_H) flags.h |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-attrtab.c \ |
| $(OUTPUT_OPTION) |
| |
| insn-attr.h: s-attr ; @true |
| s-attr : $(md_file) genattr$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genattr$(build_exeext) $(md_file) > tmp-attr.h |
| $(SHELL) $(srcdir)/move-if-change tmp-attr.h insn-attr.h |
| $(STAMP) s-attr |
| |
| insn-attrtab.c: s-attrtab ; @true |
| s-attrtab : $(md_file) genattrtab$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genattrtab$(build_exeext) $(md_file) > tmp-attrtab.c |
| $(SHELL) $(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c |
| $(STAMP) s-attrtab |
| |
| insn-output.o : insn-output.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(RTL_H) $(GGC_H) $(REGS_H) real.h conditions.h hard-reg-set.h \ |
| insn-config.h $(INSN_ATTR_H) $(EXPR_H) output.h $(RECOG_H) function.h \ |
| toplev.h flags.h insn-codes.h $(TM_P_H) $(TARGET_H) |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c \ |
| $(OUTPUT_OPTION) |
| |
| insn-output.c: s-output ; @true |
| s-output : $(md_file) genoutput$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genoutput$(build_exeext) $(md_file) > tmp-output.c |
| $(SHELL) $(srcdir)/move-if-change tmp-output.c insn-output.c |
| $(STAMP) s-output |
| |
| genrtl.o : genrtl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) $(RTL_H) \ |
| $(GGC_H) |
| genrtl.c genrtl.h : s-genrtl |
| @true # force gnu make to recheck modification times. |
| |
| s-genrtl: gengenrtl$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./gengenrtl$(build_exeext) -h > tmp-genrtl.h |
| $(SHELL) $(srcdir)/move-if-change tmp-genrtl.h genrtl.h |
| $(RUN_GEN) ./gengenrtl$(build_exeext) > tmp-genrtl.c |
| $(SHELL) $(srcdir)/move-if-change tmp-genrtl.c genrtl.c |
| $(STAMP) s-genrtl |
| |
| insn-modes.o : insn-modes.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| $(MACHMODE_H) real.h |
| min-insn-modes.c insn-modes.c insn-modes.h : s-modes ; @true |
| |
| s-modes: genmodes$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genmodes$(build_exeext) -h > tmp-modes.h |
| $(SHELL) $(srcdir)/move-if-change tmp-modes.h insn-modes.h |
| $(RUN_GEN) ./genmodes$(build_exeext) -m > tmp-min-modes.c |
| $(SHELL) $(srcdir)/move-if-change tmp-min-modes.c min-insn-modes.c |
| $(RUN_GEN) ./genmodes$(build_exeext) > tmp-modes.c |
| $(SHELL) $(srcdir)/move-if-change tmp-modes.c insn-modes.c |
| $(STAMP) s-modes |
| |
| tm-preds.h: s-preds; @true |
| |
| s-preds: genpreds$(build_exeext) $(srcdir)/move-if-change |
| $(RUN_GEN) ./genpreds$(build_exeext) > tmp-preds.h |
| $(SHELL) $(srcdir)/move-if-change tmp-preds.h tm-preds.h |
| $(STAMP) s-preds |
| |
| GTFILES = $(srcdir)/input.h $(srcdir)/coretypes.h $(srcdir)/cpplib.h \ |
| $(host_xm_file_list) $(tm_file_list) $(HASHTAB_H) $(SPLAY_TREE_H) \ |
| $(srcdir)/bitmap.h $(srcdir)/coverage.c $(srcdir)/function.h $(srcdir)/rtl.h \ |
| $(srcdir)/optabs.h $(srcdir)/tree.h $(srcdir)/libfuncs.h $(srcdir)/hashtable.h \ |
| $(srcdir)/real.h $(srcdir)/varray.h $(srcdir)/insn-addr.h \ |
| $(srcdir)/cselib.h $(srcdir)/basic-block.h $(srcdir)/cgraph.h \ |
| $(srcdir)/c-common.h $(srcdir)/c-tree.h \ |
| $(srcdir)/alias.c $(srcdir)/bitmap.c $(srcdir)/cselib.c $(srcdir)/cgraph.c \ |
| $(srcdir)/dbxout.c $(srcdir)/dwarf2out.c $(srcdir)/dwarf2asm.c \ |
| $(srcdir)/emit-rtl.c $(srcdir)/except.c $(srcdir)/explow.c $(srcdir)/expr.c \ |
| $(srcdir)/fold-const.c $(srcdir)/function.c \ |
| $(srcdir)/gcse.c $(srcdir)/integrate.c $(srcdir)/lists.c $(srcdir)/optabs.c \ |
| $(srcdir)/profile.c $(srcdir)/ra-build.c $(srcdir)/regclass.c \ |
| $(srcdir)/reg-stack.c $(srcdir)/cfglayout.c $(srcdir)/langhooks.c \ |
| $(srcdir)/sdbout.c $(srcdir)/stmt.c $(srcdir)/stor-layout.c \ |
| $(srcdir)/stringpool.c $(srcdir)/tree.c $(srcdir)/varasm.c \ |
| $(out_file) \ |
| @all_gtfiles@ |
| |
| GTFILES_FILES_LANGS = @all_gtfiles_files_langs@ |
| GTFILES_FILES_FILES = @all_gtfiles_files_files@ |
| GTFILES_LANG_DIR_NAMES = @subdirs@ |
| GTFILES_SRCDIR = @srcdir@ |
| |
| gt-cgraph.h gt-coverage.h gtype-desc.h gtype-desc.c gt-except.h \ |
| gt-function.h gt-integrate.h gt-stmt.h gt-tree.h gt-varasm.h \ |
| gt-emit-rtl.h gt-explow.h gt-stor-layout.h gt-regclass.h \ |
| gt-lists.h gt-alias.h gt-cselib.h gt-fold-const.h gt-gcse.h \ |
| gt-expr.h gt-sdbout.h gt-optabs.h gt-bitmap.h \ |
| gt-dwarf2out.h gt-ra-build.h gt-reg-stack.h gt-dwarf2asm.h \ |
| gt-dbxout.h gt-c-common.h gt-c-decl.h gt-c-parse.h \ |
| gt-c-pragma.h gtype-c.h gt-input.h gt-cfglayout.h \ |
| gt-stringpool.h gt-langhooks.h : s-gtype ; @true |
| |
| gtyp-gen.h: Makefile |
| echo "/* This file is machine generated. Do not edit. */" > tmp-gtyp.h |
| echo "static const char *const srcdir = " >> tmp-gtyp.h |
| echo "\"$(GTFILES_SRCDIR)\"" >> tmp-gtyp.h |
| echo ";" >> tmp-gtyp.h |
| echo "static const char *const lang_files[] = {" >> tmp-gtyp.h |
| ll="$(GTFILES_FILES_FILES)"; \ |
| for f in $$ll; do \ |
| echo "\"$$f\", "; done >> tmp-gtyp.h |
| echo "NULL};" >> tmp-gtyp.h |
| echo "static const char *const langs_for_lang_files[] = {" >> tmp-gtyp.h |
| ff="$(GTFILES_FILES_LANGS)"; \ |
| for f in $$ff; do \ |
| echo "\"$$f\", " ; done >> tmp-gtyp.h |
| echo "NULL};" >> tmp-gtyp.h |
| echo "static const char *const all_files[] = {" >> tmp-gtyp.h |
| gf="$(GTFILES)"; \ |
| for f in $$gf; do \ |
| echo "\"$$f\", "; done >> tmp-gtyp.h |
| echo " NULL};" >> tmp-gtyp.h |
| echo "static const char *const lang_dir_names[] = { \"c\", " >> tmp-gtyp.h |
| gf="$(GTFILES_LANG_DIR_NAMES)"; \ |
| for l in $$gf; do \ |
| echo "\"$$l\", "; done >> tmp-gtyp.h |
| echo "NULL};" >> tmp-gtyp.h |
| $(SHELL) $(srcdir)/move-if-change tmp-gtyp.h gtyp-gen.h |
| |
| s-gtype: gengtype$(build_exeext) $(GTFILES) |
| $(RUN_GEN) ./gengtype |
| $(STAMP) s-gtype |
| |
| # |
| # Compile the programs that generate insn-* from the machine description. |
| # They are compiled with $(CC_FOR_BUILD), and associated libraries, |
| # since they need to run on this machine |
| # even if GCC is being compiled to run on some other machine. |
| |
| # $(CONFIG_H) is omitted from the deps of the gen*.o |
| # because these programs don't really depend on anything |
| # about the target machine. They do depend on config.h itself, |
| # since that describes the host machine. |
| |
| # The names of programs that run on the "build" machine. |
| genprognames=genconfig genflags gencodes genemit genopinit genrecog \ |
| genextract genpeep genattr genoutput |
| |
| # The names of the executable files for those programs. |
| genprogs=$(genprognames:%=%$(build_exeext)) |
| |
| # Object files used in those programs. |
| genobjs=$(genprognames:%=%.o) read-rtl.o gensupport.o genattrtab.o \ |
| genautomata.o gengenrtl.o genmodes.o genpreds.o gengtype.o \ |
| genconstants.o gen-protos.o scan.o fix-header.o scan-decls.o \ |
| gencheck.o dummy-conditions.o genconditions.o |
| |
| $(genprogs): %$(build_exeext): %.o $(BUILD_RTL) $(BUILD_SUPPORT) \ |
| $(BUILD_PRINT) $(BUILD_ERRORS) \ |
| $(BUILD_LIBDEPS) |
| $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \ |
| $< $(BUILD_RTL) $(BUILD_SUPPORT) $(BUILD_PRINT) \ |
| $(BUILD_ERRORS) $(BUILD_LIBS) |
| |
| $(genobjs): %.o : %.c |
| $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION) |
| |
| read-rtl.o: read-rtl.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) $(RTL_H) \ |
| $(OBSTACK_H) $(HASHTAB_H) |
| |
| gensupport.o: gensupport.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) $(RTL_H) \ |
| $(OBSTACK_H) errors.h $(HASHTAB_H) gensupport.h |
| |
| genconfig.o : genconfig.c $(RTL_H) $(BCONFIG_H) \ |
| $(SYSTEM_H) coretypes.h $(GTM_H) errors.h gensupport.h |
| |
| genflags.o : genflags.c $(RTL_H) $(OBSTACK_H) $(BCONFIG_H) \ |
| $(SYSTEM_H) coretypes.h $(GTM_H) errors.h gensupport.h |
| |
| gencodes.o : gencodes.c $(RTL_H) $(BCONFIG_H) \ |
| $(SYSTEM_H) coretypes.h $(GTM_H) errors.h gensupport.h |
| |
| genconstants$(build_exeext) : genconstants.o $(BUILD_RTL) $(BUILD_EARLY_SUPPORT) \ |
| $(BUILD_ERRORS) $(BUILD_LIBDEPS) |
| $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \ |
| genconstants.o $(BUILD_EARLY_SUPPORT) $(BUILD_RTL) \ |
| $(BUILD_ERRORS) $(BUILD_LIBS) |
| |
| genconstants.o : genconstants.c $(RTL_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) \ |
| errors.h |
| |
| genemit.o : genemit.c $(RTL_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) \ |
| errors.h gensupport.h |
| |
| genopinit.o : genopinit.c $(RTL_H) $(BCONFIG_H) \ |
| $(SYSTEM_H) coretypes.h $(GTM_H) errors.h gensupport.h |
| |
| genrecog.o : genrecog.c $(RTL_H) $(BCONFIG_H) \ |
| $(SYSTEM_H) coretypes.h $(GTM_H) errors.h gensupport.h |
| |
| genextract.o : genextract.c $(RTL_H) $(BCONFIG_H) \ |
| $(SYSTEM_H) coretypes.h $(GTM_H) insn-config.h errors.h gensupport.h |
| |
| genpeep.o : genpeep.c $(RTL_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) \ |
| errors.h gensupport.h |
| |
| genattr.o : genattr.c $(RTL_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) errors.h \ |
| gensupport.h |
| |
| genattrtab$(build_exeext) : genattrtab.o genautomata.o \ |
| $(BUILD_RTL) $(BUILD_SUPPORT) $(BUILD_PRINT) $(BUILD_ERRORS) $(BUILD_VARRAY) \ |
| $(BUILD_LIBDEPS) |
| $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \ |
| genattrtab.o genautomata.o \ |
| $(BUILD_RTL) $(BUILD_SUPPORT) $(BUILD_PRINT) $(BUILD_ERRORS) \ |
| $(BUILD_VARRAY) $(BUILD_LIBS) -lm |
| |
| genattrtab.o : genattrtab.c $(RTL_H) $(OBSTACK_H) $(BCONFIG_H) \ |
| $(SYSTEM_H) coretypes.h $(GTM_H) errors.h $(GGC_H) gensupport.h genattrtab.h |
| |
| genautomata.o : genautomata.c $(RTL_H) $(OBSTACK_H) $(BCONFIG_H) \ |
| $(SYSTEM_H) coretypes.h $(GTM_H) errors.h varray.h genattrtab.h $(HASHTAB_H) |
| |
| genoutput.o : genoutput.c $(RTL_H) $(BCONFIG_H) \ |
| $(SYSTEM_H) coretypes.h $(GTM_H) errors.h gensupport.h |
| |
| gengenrtl$(build_exeext) : gengenrtl.o $(BUILD_LIBDEPS) |
| $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \ |
| gengenrtl.o $(BUILD_LIBS) |
| |
| gengenrtl.o : gengenrtl.c $(BCONFIG_H) $(SYSTEM_H) rtl.def |
| |
| genmodes$(build_exeext) : genmodes.o $(BUILD_ERRORS) $(BUILD_LIBDEPS) |
| $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \ |
| genmodes.o $(BUILD_ERRORS) $(BUILD_LIBS) |
| |
| genmodes.o : genmodes.c $(BCONFIG_H) $(SYSTEM_H) errors.h $(HASHTAB_H) \ |
| machmode.def $(extra_modes_file) |
| |
| genpreds$(build_exeext) : genpreds.o $(BUILD_LIBDEPS) |
| $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \ |
| genpreds.o $(BUILD_LIBS) |
| |
| genpreds.o : genpreds.c $(RTL_BASE_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) |
| |
| gengtype$(build_exeext) : gengtype.o gengtype-lex.o gengtype-yacc.o \ |
| $(BUILD_LIBDEPS) |
| $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \ |
| gengtype.o gengtype-lex.o gengtype-yacc.o $(BUILD_LIBS) |
| |
| gengtype.o : gengtype.c gengtype.h $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) \ |
| real.h $(RTL_BASE_H) gtyp-gen.h |
| |
| gengtype-lex.o : gengtype-lex.c gengtype.h gengtype-yacc.h \ |
| $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H) |
| $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) \ |
| $< $(OUTPUT_OPTION) |
| |
| gengtype-yacc.o : gengtype-yacc.c gengtype.h $(BCONFIG_H) $(SYSTEM_H) \ |
| coretypes.h $(GTM_H) |
| $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) \ |
| $< $(OUTPUT_OPTION) |
| |
| gengtype-lex.c : gengtype-lex.l |
| -$(FLEX) $(FLEXFLAGS) -o$@ $< |
| |
| gengtype-yacc.c gengtype-yacc.h: gengtype-yacc.y |
| -$(BISON) $(BISONFLAGS) -d -o gengtype-yacc.c $< |
| |
| genconditions$(build_exeext) : genconditions.o $(BUILD_EARLY_SUPPORT) \ |
| $(BUILD_RTL) $(BUILD_ERRORS) $(BUILD_LIBDEPS) |
| $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \ |
| genconditions.o $(BUILD_EARLY_SUPPORT) $(BUILD_RTL) \ |
| $(BUILD_ERRORS) $(BUILD_LIBS) |
| |
| genconditions.o : genconditions.c $(RTL_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h \ |
| $(GTM_H) errors.h |
| |
| # |
| # Compile the libraries to be used by gen*. |
| # If we are not cross-building, gen* use the same .o's that cc1 will use, |
| # and BUILD_PREFIX_1 is `loser-', just to ensure these rules don't conflict |
| # with the rules for rtl.o, etc. |
| $(BUILD_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H) $(RTL_H) \ |
| real.h $(GGC_H) errors.h |
| rm -f $(BUILD_PREFIX)rtl.c |
| sed -e 's/config[.]h/bconfig.h/' $(srcdir)/rtl.c > $(BUILD_PREFIX)rtl.c |
| $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $(BUILD_PREFIX)rtl.c $(OUTPUT_OPTION) |
| |
| print-rtl1.o: $(srcdir)/print-rtl.c $(BCONFIG_H) $(SYSTEM_H) coretypes.h \ |
| $(GTM_H) $(RTL_H) $(TREE_H) hard-reg-set.h $(BASIC_BLOCK_H) $(TM_P_H) |
| rm -f print-rtl1.c |
| sed -e 's/config[.]h/bconfig.h/' $(srcdir)/print-rtl.c > print-rtl1.c |
| $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) print-rtl1.c $(OUTPUT_OPTION) |
| |
| $(BUILD_PREFIX_1)bitmap.o: $(srcdir)/bitmap.c $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H) \ |
| $(RTL_H) flags.h $(BASIC_BLOCK_H) $(REGS_H) $(GGC_H) |
| rm -f $(BUILD_PREFIX)bitmap.c |
| sed -e 's/config[.]h/bconfig.h/' $(srcdir)/bitmap.c > $(BUILD_PREFIX)bitmap.c |
| $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $(BUILD_PREFIX)bitmap.c $(OUTPUT_OPTION) |
| |
| $(BUILD_PREFIX_1)errors.o: errors.c $(BCONFIG_H) $(SYSTEM_H) errors.h |
| rm -f $(BUILD_PREFIX)errors.c |
| sed -e 's/config[.]h/bconfig.h/' $(srcdir)/errors.c > $(BUILD_PREFIX)errors.c |
| $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $(BUILD_PREFIX)errors.c $(OUTPUT_OPTION) |
| |
| $(BUILD_PREFIX_1)varray.o: varray.c $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H) varray.h \ |
| $(RTL_H) $(GGC_H) $(TREE_H) bitmap.h errors.h |
| rm -f $(BUILD_PREFIX)varray.c |
| sed -e 's/config[.]h/bconfig.h/' $(srcdir)/varray.c > \ |
| $(BUILD_PREFIX)varray.c |
| $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) \ |
| $(BUILD_PREFIX)varray.c $(OUTPUT_OPTION) |
| |
| $(BUILD_PREFIX_1)ggc-none.o: ggc-none.c $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H) $(GGC_H) |
| rm -f $(BUILD_PREFIX)ggc-none.c |
| sed -e 's/config[.]h/bconfig.h/' $(srcdir)/ggc-none.c > $(BUILD_PREFIX)ggc-none.c |
| $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $(BUILD_PREFIX)ggc-none.c $(OUTPUT_OPTION) |
| |
| min-insn-modes.o: min-insn-modes.c $(BCONFIG_H) $(SYSTEM_H) $(MACHMODE_H) |
| $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) \ |
| min-insn-modes.c $(OUTPUT_OPTION) |
| |
| # |
| # Remake internationalization support. |
| intl.o: intl.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) intl.h Makefile |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -DLOCALEDIR=\"$(localedir)\" \ |
| -c $(srcdir)/intl.c $(OUTPUT_OPTION) |
| |
| # |
| # Remake cpp and protoize. |
| |
| PREPROCESSOR_DEFINES = \ |
| -DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \ |
| -DGPLUSPLUS_INCLUDE_DIR=\"$(gcc_gxx_include_dir)\" \ |
| -DGPLUSPLUS_TOOL_INCLUDE_DIR=\"$(gcc_gxx_include_dir)/$(target_noncanonical)\" \ |
| -DGPLUSPLUS_BACKWARD_INCLUDE_DIR=\"$(gcc_gxx_include_dir)/backward\" \ |
| -DLOCAL_INCLUDE_DIR=\"$(local_includedir)\" \ |
| -DCROSS_INCLUDE_DIR=\"$(CROSS_SYSTEM_HEADER_DIR)\" \ |
| -DTOOL_INCLUDE_DIR=\"$(gcc_tooldir)/include\" \ |
| @TARGET_SYSTEM_ROOT_DEFINE@ |
| |
| LIBCPP_OBJS = cpplib.o cpplex.o cppmacro.o cppexp.o cppfiles.o cpptrad.o \ |
| cpphash.o cpperror.o cppinit.o cppcharset.o \ |
| hashtable.o line-map.o mkdeps.o cpppch.o |
| |
| LIBCPP_DEPS = $(CPPLIB_H) cpphash.h line-map.h hashtable.h intl.h \ |
| $(OBSTACK_H) $(CONFIG_H) $(SYSTEM_H) |
| |
| # Most of the other archives built/used by this makefile are for |
| # targets. This one is strictly for the host. |
| libcpp.a: $(LIBCPP_OBJS) |
| -rm -rf libcpp.a |
| $(AR) $(AR_FLAGS) libcpp.a $(LIBCPP_OBJS) |
| -$(RANLIB) libcpp.a |
| |
| cppcharset.o: cppcharset.c $(LIBCPP_DEPS) cppucnid.h |
| cpperror.o: cpperror.c $(LIBCPP_DEPS) |
| cppexp.o: cppexp.c $(LIBCPP_DEPS) |
| cpplex.o: cpplex.c $(LIBCPP_DEPS) |
| cppmacro.o: cppmacro.c $(LIBCPP_DEPS) |
| cpplib.o: cpplib.c $(LIBCPP_DEPS) |
| cpphash.o: cpphash.c $(LIBCPP_DEPS) |
| cpptrad.o: cpptrad.c $(LIBCPP_DEPS) |
| cppfiles.o: cppfiles.c $(LIBCPP_DEPS) $(HASHTAB_H) mkdeps.h |
| cppinit.o: cppinit.c $(LIBCPP_DEPS) mkdeps.h |
| cpppch.o: cpppch.c $(LIBCPP_DEPS) mkdeps.h |
| |
| cppdefault.o: cppdefault.c $(CONFIG_H) $(SYSTEM_H) coretypes.h $(TM_H) \ |
| cppdefault.h Makefile |
| $(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| $(PREPROCESSOR_DEFINES) \ |
| -c $(srcdir)/cppdefault.c $(OUTPUT_OPTION) |
| |
| mkdeps.o: mkdeps.c $(CONFIG_H) $(SYSTEM_H) mkdeps.h |
| hashtable.o: hashtable.c hashtable.h $(CONFIG_H) $(SYSTEM_H) $(OBSTACK_H) |
| line-map.o: line-map.c line-map.h intl.h $(CONFIG_H) $(SYSTEM_H) |
| |
| # Note for the stamp targets, we run the program `true' instead of |
| # having an empty command (nothing following the semicolon). |
| |
| proto: config.status protoize$(exeext) unprotoize$(exeext) SYSCALLS.c.X |
| |
| PROTO_OBJS = intl.o version.o cppdefault.o |
| |
| protoize$(exeext): protoize.o $(PROTO_OBJS) $(LIBDEPS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ protoize.o $(PROTO_OBJS) $(LIBS) |
| |
| unprotoize$(exeext): unprotoize.o $(PROTO_OBJS) $(LIBDEPS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ unprotoize.o $(PROTO_OBJS) $(LIBS) |
| |
| protoize.o: protoize.c $(srcdir)/../include/getopt.h $(CONFIG_H) $(SYSTEM_H) \ |
| coretypes.h $(TM_H) Makefile version.h |
| (SHLIB_LINK='$(SHLIB_LINK)' \ |
| SHLIB_MULTILIB='$(SHLIB_MULTILIB)'; \ |
| $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| $(DRIVER_DEFINES) \ |
| $(srcdir)/protoize.c $(OUTPUT_OPTION)) |
| |
| unprotoize.o: protoize.c $(srcdir)/../include/getopt.h \ |
| $(CONFIG_H) $(SYSTEM_H) Makefile version.h |
| (SHLIB_LINK='$(SHLIB_LINK)' \ |
| SHLIB_MULTILIB='$(SHLIB_MULTILIB)'; \ |
| $(CC) -c -DUNPROTOIZE $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| $(DRIVER_DEFINES) \ |
| $(srcdir)/protoize.c $(OUTPUT_OPTION)) |
| |
| # This info describes the target machine, so compile with GCC just built. |
| SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) \ |
| stmp-int-hdrs |
| -rm -f SYSCALLS.c tmp-SYSCALLS.s |
| sed -e s/TARGET_GETGROUPS_T/$(TARGET_GETGROUPS_T)/ \ |
| $(srcdir)/sys-types.h $(srcdir)/sys-protos.h > SYSCALLS.c |
| $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ |
| -aux-info $@ -S -o tmp-SYSCALLS.s SYSCALLS.c |
| -rm -f SYSCALLS.c tmp-SYSCALLS.s |
| |
| |
| test-protoize-simple: ./protoize ./unprotoize $(GCC_PASSES) |
| -rm -f tmp-proto.[cso] |
| cp $(srcdir)/protoize.c tmp-proto.c |
| chmod u+w tmp-proto.c |
| ./protoize -N -B ./ -x getopt.h -c "-B./ -Wall -Wwrite-strings \ |
| $(GCC_CFLAGS) $(INCLUDES) \ |
| -DGCC_INCLUDE_DIR=0 \ |
| -DGPLUSPLUS_INCLUDE_DIR=0 \ |
| -DCROSS_INCLUDE_DIR=0 \ |
| -DTOOL_INCLUDE_DIR=0 \ |
| -DSTANDARD_EXEC_PREFIX=0 \ |
| -DDEFAULT_TARGET_MACHINE=0 \ |
| -DDEFAULT_TARGET_VERSION=0" tmp-proto.c |
| @echo '**********' Expect 400 lines of differences. |
| -diff $(srcdir)/protoize.c tmp-proto.c > tmp-proto.diff |
| -wc -l tmp-proto.diff |
| ./unprotoize -N -x getopt.h -c "-B./ -Wall -Wwrite-strings \ |
| $(GCC_CFLAGS) $(INCLUDES) \ |
| -DGCC_INCLUDE_DIR=0 \ |
| -DGPLUSPLUS_INCLUDE_DIR=0 \ |
| -DCROSS_INCLUDE_DIR=0 \ |
| -DTOOL_INCLUDE_DIR=0 \ |
| -DSTANDARD_EXEC_PREFIX=0 \ |
| -DDEFAULT_TARGET_MACHINE=0 \ |
| -DDEFAULT_TARGET_VERSION=0" tmp-proto.c |
| @echo Expect zero differences. |
| diff $(srcdir)/protoize.c tmp-proto.c | cat |
| -rm -f tmp-proto.[cs] tmp-proto$(objext) |
| |
| # gcov-iov.c is run on the build machine to generate gcov-iov.h from version.c |
| gcov-iov.o: gcov-iov.c version.c $(BCONFIG_H) coretypes.h $(GTM_H) $(SYSTEM_H) coretypes.h $(TM_H) |
| $(CC_FOR_BUILD) -c $(BUILD_CFLAGS) $(BUILD_CPPFLAGS) $(INCLUDES) $(srcdir)/gcov-iov.c $(OUTPUT_OPTION) |
| gcov-iov$(build_exeext): gcov-iov.o |
| $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) gcov-iov.o -o $@ |
| gcov-iov.h: s-iov |
| s-iov: gcov-iov$(build_exeext) $(srcdir)/move-if-change |
| ./gcov-iov$(build_exeext) > tmp-gcov-iov.h |
| $(SHELL) $(srcdir)/move-if-change tmp-gcov-iov.h gcov-iov.h |
| $(STAMP) s-iov |
| |
| gcov.o: gcov.c gcov-io.h gcov-io.c gcov-iov.h intl.h $(SYSTEM_H) coretypes.h $(TM_H) $(CONFIG_H) |
| gcov-dump.o: gcov-dump.c gcov-io.h gcov-io.c gcov-iov.h $(SYSTEM_H) coretypes.h $(TM_H) $(CONFIG_H) |
| |
| # Only one of 'gcov' or 'gcov.exe' is actually built, depending |
| # upon whether $(exeext) is empty or not. |
| GCOV_OBJS = gcov.o intl.o version.o |
| gcov$(exeext): $(GCOV_OBJS) $(LIBDEPS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) $(GCOV_OBJS) $(LIBS) -o $@ |
| GCOV_DUMP_OBJS = gcov-dump.o version.o |
| gcov-dump$(exeext): $(GCOV_DUMP_OBJS) $(LIBDEPS) |
| $(CC) $(ALL_CFLAGS) $(LDFLAGS) $(GCOV_DUMP_OBJS) $(LIBS) -o $@ |
| # |
| # Build the include directory. The stamp files are stmp-* rather than |
| # s-* so that mostlyclean does not force the include directory to |
| # be rebuilt. |
| |
| # Build the include directory |
| stmp-int-hdrs: $(STMP_FIXINC) $(USER_H) xlimits.h |
| # Copy in the headers provided with gcc. |
| # The sed command gets just the last file name component; |
| # this is necessary because VPATH could add a dirname. |
| # Using basename would be simpler, but some systems don't have it. |
| # The touch command is here to workaround an AIX/Linux NFS bug. |
| -if [ -d include ] ; then true; else mkdir include; chmod a+rx include; fi |
| for file in .. $(USER_H); do \ |
| if [ X$$file != X.. ]; then \ |
| realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \ |
| $(STAMP) include/$$realfile; \ |
| rm -f include/$$realfile; \ |
| cp $$file include; \ |
| chmod a+r include/$$realfile; \ |
| fi; \ |
| done |
| rm -f include/limits.h |
| cp xlimits.h include/limits.h |
| chmod a+r include/limits.h |
| # Install the README |
| rm -f include/README |
| cp $(srcdir)/README-fixinc include/README |
| chmod a+r include/README |
| $(STAMP) $@ |
| |
| # fixinc.sh depends on this, not on specs directly. |
| # The idea is to make sure specs gets built, but not rerun fixinc.sh |
| # after each stage just because specs' mtime has changed. |
| specs.ready: specs |
| -if [ -f specs.ready ] ; then \ |
| true; \ |
| else \ |
| $(STAMP) specs.ready; \ |
| fi |
| |
| # Until someone fixes this recursive make nightmare (please note where |
| # BUILD_CFLAGS and WARN_CFLAGS are first expanded below versus which |
| # later make invocation has the fine-grain -warn markings for fixinc): |
| fixinc.sh-warn = -Wno-error |
| |
| FIXINCSRCDIR=$(srcdir)/fixinc |
| fixinc.sh: $(FIXINCSRCDIR)/mkfixinc.sh $(FIXINCSRCDIR)/fixincl.c \ |
| $(FIXINCSRCDIR)/procopen.c $(FIXINCSRCDIR)/server.c \ |
| $(FIXINCSRCDIR)/server.h $(FIXINCSRCDIR)/inclhack.def specs.ready |
| (MAKE="$(MAKE)"; srcdir=`cd $(srcdir)/fixinc && ${PWD_COMMAND}` ; \ |
| CC="$(CC_FOR_BUILD)"; CFLAGS="$(BUILD_CFLAGS)"; LDFLAGS="$(BUILD_LDFLAGS)"; \ |
| WARN_CFLAGS="$(WARN_CFLAGS)"; LIBERTY=`${PWD_COMMAND}`/"$(BUILD_LIBIBERTY)"; \ |
| export MAKE srcdir CC CFLAGS LDFLAGS WARN_CFLAGS LIBERTY; \ |
| cd ./fixinc && \ |
| $(SHELL) $${srcdir}/mkfixinc.sh $(build) $(target)) |
| |
| .PHONY: install-gcc-tooldir |
| install-gcc-tooldir: |
| $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(gcc_tooldir) |
| |
| # Build fixed copies of system files. |
| stmp-fixinc: fixinc.sh gsyslimits.h |
| @if test ! -d ${SYSTEM_HEADER_DIR}; then \ |
| echo The directory that should contain system headers does not exist: >&2 ; \ |
| echo " ${SYSTEM_HEADER_DIR}" >&2 ; \ |
| if test "x${SYSTEM_HEADER_DIR}" = "x${gcc_tooldir}/sys-include"; \ |
| then sleep 1; else exit 1; fi; \ |
| fi |
| rm -rf include; mkdir include |
| -chmod a+rx include |
| (TARGET_MACHINE='$(target)'; srcdir=`cd $(srcdir); ${PWD_COMMAND}`; \ |
| SHELL='$(SHELL)' ;\ |
| export TARGET_MACHINE srcdir SHELL ; \ |
| $(SHELL) ./fixinc.sh `${PWD_COMMAND}`/include $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); \ |
| rm -f include/syslimits.h; \ |
| if [ -f include/limits.h ]; then \ |
| mv include/limits.h include/syslimits.h; \ |
| else \ |
| cp $(srcdir)/gsyslimits.h include/syslimits.h; \ |
| fi; \ |
| chmod a+r include/syslimits.h) |
| $(STAMP) stmp-fixinc |
| |
| # Files related to the fixproto script. |
| # gen-protos and fix-header are compiled with CC_FOR_BUILD, but they are only |
| # used in native and host-x-target builds, so it's safe to link them with |
| # libiberty.a. |
| |
| deduced.h: $(GCC_PASSES) $(srcdir)/scan-types.sh stmp-int-hdrs |
| if [ -d "$(SYSTEM_HEADER_DIR)" ]; \ |
| then \ |
| CC="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -isystem include -isystem ${SYSTEM_HEADER_DIR}"; \ |
| export CC; \ |
| $(SHELL) $(srcdir)/scan-types.sh "$(srcdir)" >tmp-deduced.h; \ |
| mv tmp-deduced.h deduced.h; \ |
| else \ |
| $(STAMP) deduced.h; \ |
| fi |
| |
| GEN_PROTOS_OBJS = gen-protos.o scan.o |
| gen-protos$(build_exeext): $(GEN_PROTOS_OBJS) |
| ${CC_FOR_BUILD} $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ \ |
| $(GEN_PROTOS_OBJS) $(BUILD_LIBS) |
| |
| gen-protos.o: gen-protos.c scan.h $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) |
| |
| scan.o: scan.c scan.h $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) |
| |
| xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos$(build_exeext) Makefile |
| sed -e s/TARGET_GETGROUPS_T/$(TARGET_GETGROUPS_T)/ \ |
| deduced.h $(srcdir)/sys-protos.h > tmp-fixtmp.c |
| mv tmp-fixtmp.c fixtmp.c |
| $(GCC_FOR_TARGET) fixtmp.c -w -U__SIZE_TYPE__ -U__PTRDIFF_TYPE__ -U__WCHAR_TYPE__ -E \ |
| | sed -e 's/ / /g' -e 's/ *(/ (/g' -e 's/ [ ]*/ /g' -e 's/( )/()/' \ |
| | $(RUN_GEN) ./gen-protos >xsys-protos.hT |
| mv xsys-protos.hT xsys-protos.h |
| rm -rf fixtmp.c |
| |
| # This is nominally a 'build' program, but it's run only when host==build, |
| # so we can (indeed, must) use $(LIBDEPS) and $(LIBS). |
| fix-header$(build_exeext): fix-header.o scan-decls.o scan.o xsys-protos.h \ |
| c-incpath.o cppdefault.o prefix.o $(LIBDEPS) libcpp.a |
| $(CC_FOR_BUILD) $(BUILD_CFLAGS) $(BUILD_LDFLAGS) -o $@ fix-header.o \ |
| c-incpath.o cppdefault.o scan-decls.o prefix.o scan.o libcpp.a $(LIBS) |
| |
| fix-header.o: fix-header.c $(OBSTACK_H) scan.h \ |
| xsys-protos.h $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) $(CPPLIB_H) |
| |
| scan-decls.o: scan-decls.c scan.h $(CPPLIB_H) $(BCONFIG_H) $(SYSTEM_H) coretypes.h $(GTM_H) |
| |
| # stmp-fixproto depends on this, not on fix-header directly. |
| # The idea is to make sure fix-header gets built, |
| # but not rerun fixproto after each stage |
| # just because fix-header's mtime has changed. |
| fixhdr.ready: fix-header$(build_exeext) |
| -if [ -f fixhdr.ready ] ; then \ |
| true; \ |
| else \ |
| $(STAMP) fixhdr.ready; \ |
| fi |
| |
| # stmp-int-headers is to make sure fixincludes has already finished. |
| # The if statement is so that we don't run fixproto a second time |
| # if it has already been run on the files in `include'. |
| stmp-fixproto: fixhdr.ready fixproto stmp-int-hdrs |
| if [ -f include/fixed ] ; then true; \ |
| else \ |
| : This line works around a 'make' bug in BSDI 1.1.; \ |
| FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES; \ |
| mkinstalldirs="$(SHELL) $(srcdir)/mkinstalldirs"; \ |
| export mkinstalldirs; \ |
| if [ -d "$(SYSTEM_HEADER_DIR)" ]; then \ |
| $(SHELL) ${srcdir}/fixproto include include $(SYSTEM_HEADER_DIR); \ |
| if [ $$? -eq 0 ] ; then true ; else exit 1 ; fi ; \ |
| else true; fi; \ |
| $(STAMP) include/fixed; \ |
| fi |
| $(STAMP) stmp-fixproto |
| # |
| # Remake the info files. |
| |
| doc: $(BUILD_INFO) $(GENERATED_MANPAGES) gccbug |
| |
| INFOFILES = doc/cpp.info doc/gcc.info doc/gccint.info \ |
| doc/gccinstall.info doc/cppinternals.info |
| |
| info: $(INFOFILES) lang.info @GENINSRC@ srcinfo lang.srcinfo |
| |
| srcinfo: $(INFOFILES) |
| -cp -p $^ $(srcdir)/doc |
| |
| TEXI_CPP_FILES = cpp.texi fdl.texi cppenv.texi cppopts.texi |
| |
| TEXI_GCC_FILES = gcc.texi gcc-common.texi frontends.texi standards.texi \ |
| invoke.texi extend.texi md.texi objc.texi gcov.texi trouble.texi \ |
| bugreport.texi service.texi contribute.texi compat.texi funding.texi \ |
| gnu.texi gpl.texi fdl.texi contrib.texi cppenv.texi cppopts.texi |
| |
| TEXI_GCCINT_FILES = gccint.texi gcc-common.texi contribute.texi makefile.texi \ |
| configterms.texi portability.texi interface.texi passes.texi \ |
| c-tree.texi rtl.texi md.texi tm.texi hostconfig.texi fragments.texi \ |
| configfiles.texi collect2.texi headerdirs.texi funding.texi gnu.texi \ |
| gpl.texi fdl.texi contrib.texi languages.texi sourcebuild.texi \ |
| gty.texi libgcc.texi |
| |
| TEXI_GCCINSTALL_FILES = install.texi install-old.texi fdl.texi |
| |
| TEXI_CPPINT_FILES = cppinternals.texi |
| |
| # The *.1, *.7, *.info, and *.dvi files are being generated from implicit |
| # patterns. To use them, put each of the specific target with with their |
| # specific dependencies but no build commands. |
| |
| doc/cpp.info: $(TEXI_CPP_FILES) |
| doc/gcc.info: $(TEXI_GCC_FILES) |
| doc/gccint.info: $(TEXI_GCCINT_FILES) |
| doc/cppinternals.info: $(TEXI_CPPINT_FILES) |
| |
| doc/%.info: %.texi |
| if [ x$(BUILD_INFO) = xinfo ]; then \ |
| $(MAKEINFO) $(MAKEINFOFLAGS) -I $(docdir) \ |
| -I $(docdir)/include -o $@ $<; \ |
| fi |
| |
| # Duplicate entry to handle renaming of gccinstall.info |
| doc/gccinstall.info: $(TEXI_GCCINSTALL_FILES) |
| if [ x$(BUILD_INFO) = xinfo ]; then \ |
| $(MAKEINFO) $(MAKEINFOFLAGS) -I $(docdir) \ |
| -I $(docdir)/include -o $@ $<; \ |
| fi |
| |
| doc/cpp.dvi: $(TEXI_CPP_FILES) |
| doc/gcc.dvi: $(TEXI_GCC_FILES) |
| doc/gccint.dvi: $(TEXI_GCCINT_FILES) |
| doc/cppinternals.dvi: $(TEXI_CPPINT_FILES) |
| |
| dvi:: doc/gcc.dvi doc/gccint.dvi doc/gccinstall.dvi doc/cpp.dvi \ |
| doc/cppinternals.dvi |
| |
| doc/%.dvi: %.texi |
| $(TEXI2DVI) -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $< |
| |
| # Duplicate entry to handle renaming of gccinstall.dvi |
| doc/gccinstall.dvi: $(TEXI_GCCINSTALL_FILES) |
| $(TEXI2DVI) -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $< |
| |
| MANFILES = doc/gcov.1 doc/cpp.1 doc/gcc.1 doc/gfdl.7 doc/gpl.7 doc/fsf-funding.7 |
| |
| generated-manpages: man |
| |
| man: $(MANFILES) lang.man @GENINSRC@ srcman lang.srcman |
| |
| srcman: $(MANFILES) |
| -cp -p $^ $(srcdir)/doc |
| |
| doc/%.1: %.pod |
| $(STAMP) $@ |
| -($(POD2MAN) --section=1 $< > $(@).T$$$$ && \ |
| mv -f $(@).T$$$$ $@) || \ |
| (rm -f $(@).T$$$$ && exit 1) |
| |
| doc/%.7: %.pod |
| $(STAMP) $@ |
| -($(POD2MAN) --section=7 $< > $(@).T$$$$ && \ |
| mv -f $(@).T$$$$ $@) || \ |
| (rm -f $(@).T$$$$ && exit 1) |
| |
| %.pod: %.texi |
| $(STAMP) $@ |
| -$(TEXI2POD) $< > $@ |
| |
| .INTERMEDIATE: cpp.pod gcc.pod gfdl.pod fsf-funding.pod |
| cpp.pod: cpp.texi cppenv.texi cppopts.texi |
| |
| # These next rules exist because the output name is not the same as |
| # the input name, so our implict %.pod rule will not work. |
| |
| gcc.pod: invoke.texi cppenv.texi cppopts.texi |
| $(STAMP) $@ |
| -$(TEXI2POD) $< > $@ |
| gfdl.pod: fdl.texi |
| $(STAMP) $@ |
| -$(TEXI2POD) $< > $@ |
| fsf-funding.pod: funding.texi |
| $(STAMP) $@ |
| -$(TEXI2POD) $< > $@ |
| |
| # |
| # Deletion of files made during compilation. |
| # There are four levels of this: |
| # `mostlyclean', `clean', `distclean' and `maintainer-clean'. |
| # `mostlyclean' is useful while working on a particular type of machine. |
| # It deletes most, but not all, of the files made by compilation. |
| # It does not delete libgcc.a or its parts, so it won't have to be recompiled. |
| # `clean' deletes everything made by running `make all'. |
| # `distclean' also deletes the files made by config. |
| # `maintainer-clean' also deletes everything that could be regenerated |
| # automatically, except for `configure'. |
| # We remove as much from the language subdirectories as we can |
| # (less duplicated code). |
| |
| mostlyclean: lang.mostlyclean |
| -rm -f $(STAGESTUFF) |
| -rm -f *$(coverageexts) |
| -rm -rf libgcc |
| # Delete the temporary source copies for cross compilation. |
| -rm -f $(BUILD_PREFIX_1)rtl.c $(BUILD_PREFIX_1)print-rtl.c |
| -rm -f $(BUILD_PREFIX_1)bitmap.c $(BUILD_PREFIX_1)errors.c |
| -rm -f $(BUILD_PREFIX_1)ggc-none.c print-rtl1.c |
| # Delete the temp files made in the course of building libgcc.a. |
| -rm -f xlimits.h |
| # Delete other built files. |
| -rm -f xsys-protos.hT |
| -rm -f specs.h gencheck.h options.c options.h |
| # Delete the stamp and temporary files. |
| -rm -f s-* tmp-* stamp-* stmp-* |
| -rm -f */stamp-* */tmp-* |
| # Delete debugging dump files. |
| -rm -f *.[0-9][0-9].* */*.[0-9][0-9].* |
| # Delete some files made during installation. |
| -rm -f specs $(SPECS) SYSCALLS.c.X SYSCALLS.c |
| -rm -f collect collect2 mips-tfile mips-tdump |
| # Delete files generated for fixproto |
| -rm -rf fix-header$(build_exeext) xsys-protos.h deduced.h tmp-deduced.h \ |
| gen-protos$(build_exeext) fixproto.list fixtmp.* fixhdr.ready |
| # Delete files generated for fixincl |
| -rm -rf fixincl fixinc.sh specs.ready |
| (cd fixinc && $(MAKE) clean) |
| # Delete unwanted output files from TeX. |
| -rm -f *.toc *.log *.vr *.fn *.cp *.tp *.ky *.pg |
| -rm -f */*.toc */*.log */*.vr */*.fn */*.cp */*.tp */*.ky */*.pg |
| # Delete sorted indices we don't actually use. |
| -rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns |
| # Delete core dumps. |
| -rm -f core */core |
| # Delete file generated for gengtype.c |
| -rm -f gtyp-gen.h |
| # Delete files generated by gengtype.c |
| -rm -f gtype-* |
| -rm -f gt-* |
| |
| # Delete all files made by compilation |
| # that don't exist in the distribution. |
| clean: mostlyclean lang.clean |
| -rm -f libgcc.a libgcc_eh.a libgcov.a |
| -rm -f libgcc_s$(SHLIB_EXT) libgcc_s$(SHLIB_EXT).1 |
| -rm -f config.h tconfig.h bconfig.h tm_p.h tm.h |
| -rm -f cs-* |
| -rm -rf libgcc |
| -rm -f doc/*.dvi |
| # Delete the include directory. |
| -rm -rf include |
| # Delete files used by the "multilib" facility (including libgcc subdirs). |
| -rm -f multilib.h tmpmultilib* |
| -if [ "x$(MULTILIB_DIRNAMES)" != x ] ; then \ |
| rm -rf $(MULTILIB_DIRNAMES); \ |
| else if [ "x$(MULTILIB_OPTIONS)" != x ] ; then \ |
| rm -rf `echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \ |
| fi ; fi |
| -rm -fr stage1 stage2 stage3 stage4 stageprofile stagefeedback |
| # Delete stamps of bootstrap stages |
| -rm -f stage?_* |
| -rm -f clean?_* |
| -rm -f stage_last |
| |
| # Delete all files that users would normally create |
| # while building and installing GCC. |
| distclean: clean lang.distclean |
| -rm -f auto-host.h auto-build.h |
| -rm -f cstamp-h |
| -rm -f config.status config.run config.cache config.bak |
| -rm -f Make-lang Make-hooks Make-host Make-target |
| -rm -f Makefile *.oaux |
| -rm -f gthr-default.h |
| -rm -f */stage1 */stage2 */stage3 */stage4 */include */stageprofile */stagefeedback |
| -rm -f c-parse.y c-parse.c c-parse.output TAGS */TAGS |
| -rm -f *.asm |
| -rm -f site.exp site.bak testsuite/site.exp testsuite/site.bak |
| -rm -f testsuite/*.log testsuite/*.sum |
| -cd testsuite && rm -f x *.x *.x? *.exe *.rpo *.o *.s *.S *.c |
| -cd testsuite && rm -f *.out *.gcov *$(coverageexts) |
| -rm -rf ${QMTEST_DIR} stamp-qmtest |
| -rm -f cxxmain.c |
| -rm -f mklibgcc mkheaders gccbug .gdbinit configargs.h |
| -rm -f gcov.pod |
| -rm -f fixinc/Makefile |
| # Delete po/*.gmo only if we are not building in the source directory. |
| -if [ ! -f po/exgettext ]; then rm -f po/*.gmo; fi |
| -rmdir ada cp f java objc fixinc intl po testsuite 2>/dev/null |
| |
| # Get rid of every file that's generated from some other file, except for `configure'. |
| # Most of these files ARE PRESENT in the GCC distribution. |
| maintainer-clean: |
| @echo 'This command is intended for maintainers to use; it' |
| @echo 'deletes files that may need special tools to rebuild.' |
| $(MAKE) lang.maintainer-clean distclean |
| -rm -f $(srcdir)/c-parse.y $(srcdir)/c-parse.c |
| -rm -f cpp.??s cpp.*aux |
| -rm -f gcc.??s gcc.*aux |
| -rm -f $(docdir)/*.info $(docdir)/*.1 $(docdir)/*.7 $(docdir)/*.dvi |
| # |
| # Entry points `install' and `uninstall'. |
| # Also use `install-collect2' to install collect2 when the config files don't. |
| |
| # Copy the compiler files into directories where they will be run. |
| # Install the driver last so that the window when things are |
| # broken is small. |
| install: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \ |
| install-cpp install-man install-info install-@POSUB@ \ |
| lang.install-normal install-driver |
| |
| # Handle cpp installation. |
| install-cpp: cpp$(exeext) |
| -rm -f $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext) |
| -$(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext) |
| -if [ x$(cpp_install_dir) != x ]; then \ |
| rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \ |
| $(INSTALL_PROGRAM) -m 755 cpp$(exeext) $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \ |
| else true; fi |
| |
| # Create the installation directories. |
| # $(libdir)/gcc/include isn't currently searched by cpp. |
| installdirs: |
| $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(libsubdir) |
| $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(libexecsubdir) |
| $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(bindir) |
| $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(includedir) |
| $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(infodir) |
| $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(slibdir) |
| $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(man1dir) |
| $(SHELL) ${srcdir}/mkinstalldirs $(DESTDIR)$(man7dir) |
| |
| # Install the compiler executables built during cross compilation. |
| install-common: native $(EXTRA_PARTS) lang.install-common installdirs |
| for file in $(COMPILERS); do \ |
| if [ -f $$file ] ; then \ |
| rm -f $(DESTDIR)$(libexecsubdir)/$$file; \ |
| $(INSTALL_PROGRAM) $$file $(DESTDIR)$(libexecsubdir)/$$file; \ |
| else true; \ |
| fi; \ |
| done |
| for file in $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2) ..; do \ |
| if [ x"$$file" != x.. ]; then \ |
| rm -f $(DESTDIR)$(libexecsubdir)/$$file; \ |
| $(INSTALL_PROGRAM) $$file $(DESTDIR)$(libexecsubdir)/$$file; \ |
| else true; fi; \ |
| done |
| for file in $(EXTRA_PARTS) ..; do \ |
| if [ x"$$file" != x.. ]; then \ |
| rm -f $(DESTDIR)$(libsubdir)/$$file; \ |
| $(INSTALL_DATA) $$file $(DESTDIR)$(libsubdir)/$$file; \ |
| chmod a-x $(DESTDIR)$(libsubdir)/$$file; \ |
| else true; fi; \ |
| done |
| # Don't mess with specs if it doesn't exist yet. |
| -if [ -f specs ] ; then \ |
| rm -f $(DESTDIR)$(libsubdir)/specs; \ |
| $(INSTALL_DATA) $(SPECS) $(DESTDIR)$(libsubdir)/specs; \ |
| chmod a-x $(DESTDIR)$(libsubdir)/specs; \ |
| fi |
| # Install protoize if it was compiled. |
| -if [ -f protoize$(exeext) ]; then \ |
| rm -f $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \ |
| $(INSTALL_PROGRAM) protoize$(exeext) $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext); \ |
| rm -f $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \ |
| $(INSTALL_PROGRAM) unprotoize$(exeext) $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext); \ |
| rm -f $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \ |
| $(INSTALL_DATA) SYSCALLS.c.X $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \ |
| chmod a-x $(DESTDIR)$(libsubdir)/SYSCALLS.c.X; \ |
| fi |
| # Install gcov if it was compiled. |
| -if [ -f gcov$(exeext) ]; \ |
| then \ |
| rm -f $(DESTDIR)$(bindir)/$(GCOV_INSTALL_NAME)$(exeext); \ |
| $(INSTALL_PROGRAM) gcov$(exeext) $(DESTDIR)$(bindir)/$(GCOV_INSTALL_NAME)$(exeext); \ |
| fi |
| $(INSTALL_SCRIPT) gccbug $(DESTDIR)$(bindir)/$(GCCBUG_INSTALL_NAME) |
| |
| # Install the driver program as $(target_noncanonical)-gcc, |
| # $(target_noncanonical)-gcc-$(version) |
| # and also as either gcc (if native) or $(gcc_tooldir)/bin/gcc. |
| install-driver: installdirs xgcc$(exeext) |
| -rm -f $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext) |
| -$(INSTALL_PROGRAM) xgcc$(exeext) $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext) |
| -rm -f $(DESTDIR)$(bindir)/$(target_noncanonical)-gcc-$(version) |
| -( cd $(DESTDIR)$(bindir) && \ |
| $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_noncanonical)-gcc-$(version) ) |
| -if [ -f gcc-cross$(exeext) ] ; then \ |
| if [ -d $(DESTDIR)$(gcc_tooldir)/bin/. ] ; then \ |
| rm -f $(DESTDIR)$(gcc_tooldir)/bin/gcc$(exeext); \ |
| $(INSTALL_PROGRAM) gcc-cross$(exeext) $(DESTDIR)$(gcc_tooldir)/bin/gcc$(exeext); \ |
| else true; fi; \ |
| else \ |
| rm -f $(DESTDIR)$(bindir)/$(target_noncanonical)-gcc-tmp$(exeext); \ |
| ( cd $(DESTDIR)$(bindir) && \ |
| $(LN) $(GCC_INSTALL_NAME)$(exeext) $(target_noncanonical)-gcc-tmp$(exeext) && \ |
| mv -f $(target_noncanonical)-gcc-tmp$(exeext) $(GCC_TARGET_INSTALL_NAME)$(exeext) ); \ |
| fi |
| |
| # Install the info files. |
| # $(INSTALL_DATA) might be a relative pathname, so we can't cd into srcdir |
| # to do the install. |
| install-info:: doc installdirs \ |
| $(DESTDIR)$(infodir)/cpp.info \ |
| $(DESTDIR)$(infodir)/gcc.info \ |
| $(DESTDIR)$(infodir)/cppinternals.info \ |
| $(DESTDIR)$(infodir)/gccinstall.info \ |
| $(DESTDIR)$(infodir)/gccint.info |
| |
| $(DESTDIR)$(infodir)/%.info: doc/%.info installdirs |
| rm -f $@ |
| if [ -f $< ]; then \ |
| for f in $(<)*; do \ |
| realfile=`echo $$f | sed -e 's|.*/\([^/]*\)$$|\1|'`; \ |
| $(INSTALL_DATA) $$f $(DESTDIR)$(infodir)/$$realfile; \ |
| chmod a-x $(DESTDIR)$(infodir)/$$realfile; \ |
| done; \ |
| else true; fi |
| -if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ |
| if [ -f $@ ]; then \ |
| install-info --dir-file=$(DESTDIR)$(infodir)/dir $@; \ |
| else true; fi; \ |
| else true; fi; |
| |
| # Install the man pages. |
| install-man: installdirs lang.install-man \ |
| $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext) \ |
| $(DESTDIR)$(man1dir)/$(CPP_INSTALL_NAME)$(man1ext) \ |
| $(DESTDIR)$(man1dir)/$(GCOV_INSTALL_NAME)$(man1ext) \ |
| $(DESTDIR)$(man7dir)/fsf-funding$(man7ext) \ |
| $(DESTDIR)$(man7dir)/gfdl$(man7ext) \ |
| $(DESTDIR)$(man7dir)/gpl$(man7ext) |
| |
| $(DESTDIR)$(man7dir)/%$(man7ext): doc/%.7 |
| -rm -f $@ |
| -$(INSTALL_DATA) $< $@ |
| -chmod a-x $@ |
| |
| $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext): doc/gcc.1 |
| -rm -f $@ |
| -$(INSTALL_DATA) $< $@ |
| -chmod a-x $@ |
| |
| $(DESTDIR)$(man1dir)/$(CPP_INSTALL_NAME)$(man1ext): doc/cpp.1 |
| -rm -f $@ |
| -$(INSTALL_DATA) $< $@ |
| -chmod a-x $@ |
| |
| $(DESTDIR)$(man1dir)/$(GCOV_INSTALL_NAME)$(man1ext): doc/gcov.1 |
| -rm -f $@ |
| -$(INSTALL_DATA) $< $@ |
| -chmod a-x $@ |
| |
| # Install the library. |
| install-libgcc: libgcc.mk libgcc.a libgcov.a installdirs |
| $(MAKE) \ |
| CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \ |
| CONFIG_H="$(TCONFIG_H)" \ |
| MAKEOVERRIDES= \ |
| -f libgcc.mk install |
| |
| # Install multiple versions of libgcc.a, libgcov.a. |
| install-multilib: stmp-multilib installdirs |
| $(MAKE) \ |
| CFLAGS="$(CFLAGS) $(WARN_CFLAGS)" \ |
| CONFIG_H="$(CONFIG_H)" \ |
| MAKEOVERRIDES= \ |
| -f libgcc.mk install |
| |
| # Install all the header files built in the include subdirectory. |
| install-headers: $(INSTALL_HEADERS_DIR) |
| # Fix symlinks to absolute paths in the installed include directory to |
| # point to the installed directory, not the build directory. |
| # Don't need to use LN_S here since we really do need ln -s and no substitutes. |
| -files=`cd $(DESTDIR)$(libsubdir)/include; find . -type l -print 2>/dev/null`; \ |
| if [ $$? -eq 0 ]; then \ |
| dir=`cd include; ${PWD_COMMAND}`; \ |
| for i in $$files; do \ |
| dest=`ls -ld $(DESTDIR)$(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \ |
| if expr "$$dest" : "$$dir.*" > /dev/null; then \ |
| rm -f $(DESTDIR)$(libsubdir)/include/$$i; \ |
| ln -s `echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(DESTDIR)$(libsubdir)/include/$$i; \ |
| fi; \ |
| done; \ |
| fi |
| |
| # Create or recreate the gcc private include file directory. |
| install-include-dir: installdirs |
| -rm -rf $(DESTDIR)$(libsubdir)/include |
| mkdir $(DESTDIR)$(libsubdir)/include |
| -chmod a+rx $(DESTDIR)$(libsubdir)/include |
| |
| # Install the include directory using tar. |
| install-headers-tar: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir |
| # We use `pwd`/include instead of just include to problems with CDPATH |
| # Unless a full pathname is provided, some shells would print the new CWD, |
| # found in CDPATH, corrupting the output. We could just redirect the |
| # output of `cd', but some shells lose on redirection within `()'s |
| (cd `${PWD_COMMAND}`/include ; \ |
| tar -cf - .; exit 0) | (cd $(DESTDIR)$(libsubdir)/include; tar xpf - ) |
| # /bin/sh on some systems returns the status of the first tar, |
| # and that can lose with GNU tar which always writes a full block. |
| # So use `exit 0' to ignore its exit status. |
| |
| # Install the include directory using cpio. |
| install-headers-cpio: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir |
| # See discussion about the use of `pwd` above |
| cd `${PWD_COMMAND}`/include ; \ |
| find . -print | cpio -pdum $(DESTDIR)$(libsubdir)/include |
| |
| # Install the include directory using cp. |
| install-headers-cp: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir |
| cp -p -r include $(DESTDIR)$(libsubdir) |
| |
| itoolsdir = $(libexecsubdir)/install-tools |
| itoolsdatadir = $(libsubdir)/install-tools |
| # Don't install the headers. Instead, install appropriate scripts |
| # and supporting files for fixincludes to be run later. |
| install-mkheaders: stmp-int-hdrs $(STMP_FIXPROTO) install-include-dir \ |
| mkheaders xlimits.h |
| -rm -rf $(DESTDIR)$(itoolsdir) $(DESTDIR)$(itoolsdatadir) |
| $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$(itoolsdatadir)/include |
| $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$(itoolsdir) |
| for file in $(USER_H); do \ |
| realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \ |
| $(INSTALL_DATA) $$file \ |
| $(DESTDIR)$(itoolsdatadir)/include/$$realfile ; \ |
| done |
| $(INSTALL_DATA) xlimits.h $(DESTDIR)$(itoolsdatadir)/include/limits.h |
| if [ x$(STMP_FIXINC) != x ] ; then \ |
| $(INSTALL_DATA) $(srcdir)/README-fixinc \ |
| $(DESTDIR)$(itoolsdatadir)/include/README ; \ |
| $(INSTALL_SCRIPT) fixinc.sh $(DESTDIR)$(itoolsdir)/fixinc.sh ; \ |
| $(INSTALL_PROGRAM) fixinc/fixincl $(DESTDIR)$(itoolsdir)/fixincl ; \ |
| $(INSTALL_DATA) $(srcdir)/gsyslimits.h \ |
| $(DESTDIR)$(itoolsdatadir)/gsyslimits.h ; \ |
| else :; fi |
| if [ x$(STMP_FIXPROTO) != x ] ; then \ |
| $(INSTALL_SCRIPT) $(srcdir)/mkinstalldirs \ |
| $(DESTDIR)$(itoolsdir)/mkinstalldirs ; \ |
| $(INSTALL_SCRIPT) $(srcdir)/fixproto $(DESTDIR)$(itoolsdir)/fixproto ; \ |
| $(INSTALL_PROGRAM) fix-header$(build_exeext) \ |
| $(DESTDIR)$(itoolsdir)/fix-header$(build_exeext) ; \ |
| else :; fi |
| $(INSTALL_SCRIPT) mkheaders $(DESTDIR)$(itoolsdir)/mkheaders |
| echo 'SYSTEM_HEADER_DIR="'"$(SYSTEM_HEADER_DIR)"'"' \ |
| > $(DESTDIR)$(itoolsdatadir)/mkheaders.conf |
| echo 'OTHER_FIXINCLUDES_DIRS="$(OTHER_FIXINCLUDES_DIRS)"' \ |
| >> $(DESTDIR)$(itoolsdatadir)/mkheaders.conf |
| echo 'FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"' \ |
| >> $(DESTDIR)$(itoolsdatadir)/mkheaders.conf |
| echo 'STMP_FIXPROTO="$(STMP_FIXPROTO)"' \ |
| >> $(DESTDIR)$(itoolsdatadir)/mkheaders.conf |
| echo 'STMP_FIXINC="$(STMP_FIXINC)"' \ |
| >> $(DESTDIR)$(itoolsdatadir)/mkheaders.conf |
| |
| # Use this target to install the program `collect2' under the name `collect2'. |
| install-collect2: collect2 installdirs |
| $(INSTALL_PROGRAM) collect2$(exeext) $(DESTDIR)$(libexecsubdir)/collect2$(exeext) |
| # Install the driver program as $(libsubdir)/gcc for collect2. |
| $(INSTALL_PROGRAM) xgcc$(exeext) $(DESTDIR)$(libexecsubdir)/gcc$(exeext) |
| |
| # Cancel installation by deleting the installed files. |
| uninstall: lang.uninstall |
| -rm -rf $(DESTDIR)$(libsubdir) |
| -rm -rf $(DESTDIR)$(libexecsubdir) |
| -rm -rf $(DESTDIR)$(bindir)/$(GCC_INSTALL_NAME)$(exeext) |
| -rm -f $(DESTDIR)$(bindir)/$(CPP_INSTALL_NAME)$(exeext) |
| -if [ x$(cpp_install_dir) != x ]; then \ |
| rm -f $(DESTDIR)$(prefix)/$(cpp_install_dir)/$(CPP_INSTALL_NAME)$(exeext); \ |
| else true; fi |
| -rm -rf $(DESTDIR)$(bindir)/$(PROTOIZE_INSTALL_NAME)$(exeext) |
| -rm -rf $(DESTDIR)$(bindir)/$(UNPROTOIZE_INSTALL_NAME)$(exeext) |
| -rm -rf $(DESTDIR)$(bindir)/$(GCOV_INSTALL_NAME)$(exeext) |
| -rm -rf $(DESTDIR)$(man1dir)/$(GCC_INSTALL_NAME)$(man1ext) |
| -rm -rf $(DESTDIR)$(man1dir)/cpp$(man1ext) |
| -rm -rf $(DESTDIR)$(man1dir)/protoize$(man1ext) |
| -rm -rf $(DESTDIR)$(man1dir)/unprotoize$(man1ext) |
| -rm -f $(DESTDIR)$(infodir)/cpp.info* $(DESTDIR)$(infodir)/gcc.info* |
| -rm -f $(DESTDIR)$(infodir)/cppinternals.info* $(DESTDIR)$(infodir)/gccint.info* |
| # |
| # These targets are for the dejagnu testsuites. The file site.exp |
| # contains global variables that all the testsuites will use. |
| |
| target_subdir = @target_subdir@ |
| |
| site.exp: ./config.status Makefile |
| @echo "Making a new config file..." |
| -@rm -f ./tmp? |
| @$(STAMP) site.exp |
| -@mv site.exp site.bak |
| @echo "## these variables are automatically generated by make ##" > ./tmp0 |
| @echo "# Do not edit here. If you wish to override these values" >> ./tmp0 |
| @echo "# add them to the last section" >> ./tmp0 |
| @echo "set rootme \"`${PWD_COMMAND}`\"" >> ./tmp0 |
| @echo "set srcdir \"`cd ${srcdir}; ${PWD_COMMAND}`\"" >> ./tmp0 |
| @echo "set host_triplet $(host)" >> ./tmp0 |
| @echo "set build_triplet $(build)" >> ./tmp0 |
| @echo "set target_triplet $(target)" >> ./tmp0 |
| @echo "set target_alias $(target_noncanonical)" >> ./tmp0 |
| # CFLAGS is set even though it's empty to show we reserve the right to set it. |
| @echo "set CFLAGS \"\"" >> ./tmp0 |
| @echo "set CXXFLAGS \"\"" >> ./tmp0 |
| @echo "set TESTING_IN_BUILD_TREE 1" >> ./tmp0 |
| @echo "set HAVE_LIBSTDCXX_V3 1" >> ./tmp0 |
| # If newlib has been configured, we need to pass -B to gcc so it can find |
| # newlib's crt0.o if it exists. This will cause a "path prefix not used" |
| # message if it doesn't, but the testsuite is supposed to ignore the message - |
| # it's too difficult to tell when to and when not to pass -B (not all targets |
| # have crt0's). We could only add the -B if ../newlib/crt0.o exists, but that |
| # seems like too selective a test. |
| # ??? Another way to solve this might be to rely on linker scripts. Then |
| # theoretically the -B won't be needed. |
| # We also need to pass -L ../ld so that the linker can find ldscripts. |
| @if [ -d $(objdir)/../$(target_subdir)/newlib ] \ |
| && [ "${host}" != "${target}" ]; then \ |
| echo "set newlib_cflags \"-I$(objdir)/../$(target_subdir)/newlib/targ-include -I\$$srcdir/../newlib/libc/include\"" >> ./tmp0; \ |
| echo "set newlib_ldflags \"-B$(objdir)/../$(target_subdir)/newlib/\"" >> ./tmp0; \ |
| echo "append CFLAGS \" \$$newlib_cflags\"" >> ./tmp0; \ |
| echo "append CXXFLAGS \" \$$newlib_cflags\"" >> ./tmp0; \ |
| echo "append LDFLAGS \" \$$newlib_ldflags\"" >> ./tmp0; \ |
| else true; \ |
| fi |
| @if [ -d $(objdir)/../ld ] ; then \ |
| echo "append LDFLAGS \" -L$(objdir)/../ld\"" >> ./tmp0; \ |
| else true; \ |
| fi |
| echo "set tmpdir $(objdir)/testsuite" >> ./tmp0 |
| @echo "set srcdir \"\$${srcdir}/testsuite\"" >> ./tmp0 |
| @if [ "X$(ALT_CC_UNDER_TEST)" != "X" ] ; then \ |
| echo "set ALT_CC_UNDER_TEST \"$(ALT_CC_UNDER_TEST)\"" >> ./tmp0; \ |
| else true; \ |
| fi |
| @if [ "X$(ALT_CXX_UNDER_TEST)" != "X" ] ; then \ |
| echo "set ALT_CXX_UNDER_TEST \"$(ALT_CXX_UNDER_TEST)\"" >> ./tmp0; \ |
| else true; \ |
| fi |
| @if [ "X$(COMPAT_OPTIONS)" != "X" ] ; then \ |
| echo "set COMPAT_OPTIONS \"$(COMPAT_OPTIONS)\"" >> ./tmp0; \ |
| else true; \ |
| fi |
| @echo "## All variables above are generated by configure. Do Not Edit ##" >> ./tmp0 |
| @cat ./tmp0 > site.exp |
| @cat site.bak | sed \ |
| -e '1,/^## All variables above are.*##/ d' >> site.exp |
| -@rm -f ./tmp? |
| |
| CHECK_TARGETS = check-gcc @check_languages@ |
| |
| check: $(CHECK_TARGETS) |
| |
| # The idea is to parallelize testing of multilibs, for example: |
| # make -j3 check-gcc//sh-hms-sim/{-m1,-m2,-m3,-m3e,-m4}/{,-nofpu} |
| # will run 3 concurrent sessions of check-gcc, eventually testing |
| # all 10 combinations. GNU make is required, as is a shell that expands |
| # alternations within braces. |
| lang_checks_parallel = $(lang_checks:=//%) |
| $(lang_checks_parallel): site.exp |
| target=`echo "$@" | sed 's,//.*,,'`; \ |
| variant=`echo "$@" | sed 's,^[^/]*//,,'`; \ |
| vardots=`echo "$$variant" | sed 's,/,.,g'`; \ |
| $(MAKE) TESTSUITEDIR="testsuite.$$vardots" \ |
| RUNTESTFLAGS="--target_board=$$variant $(RUNTESTFLAGS)" \ |
| "$$target" |
| |
| TESTSUITEDIR = testsuite |
| |
| $(TESTSUITEDIR)/site.exp: site.exp |
| test -d $(TESTSUITEDIR) || mkdir $(TESTSUITEDIR) |
| -rm -f $@ |
| sed '/set tmpdir/ s|testsuite|$(TESTSUITEDIR)|' < site.exp > $@ |
| |
| $(lang_checks): check-% : $(TESTSUITEDIR)/site.exp |
| -(rootme=`${PWD_COMMAND}`; export rootme; \ |
| srcdir=`cd ${srcdir}; ${PWD_COMMAND}` ; export srcdir ; \ |
| cd $(TESTSUITEDIR); \ |
| EXPECT=${EXPECT} ; export EXPECT ; \ |
| if [ -f $${rootme}/../expect/expect ] ; then \ |
| TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; ${PWD_COMMAND}` ; \ |
| export TCL_LIBRARY ; fi ; \ |
| $(RUNTEST) --tool $* $(RUNTESTFLAGS)) |
| |
| check-consistency: testsuite/site.exp |
| -rootme=`${PWD_COMMAND}`; export rootme; \ |
| srcdir=`cd ${srcdir}; ${PWD_COMMAND}` ; export srcdir ; \ |
| cd testsuite; \ |
| EXPECT=${EXPECT} ; export EXPECT ; \ |
| if [ -f $${rootme}/../expect/expect ] ; then \ |
| TCL_LIBRARY=`cd .. ; cd ${srcdir}/../tcl/library ; ${PWD_COMMAND}` ; \ |
| export TCL_LIBRARY ; fi ; \ |
| $(RUNTEST) --tool consistency $(RUNTESTFLAGS) |
| |
| # QMTest targets |
| |
| # The path to qmtest. |
| QMTEST_PATH=qmtest |
| |
| # The flags to pass to qmtest. |
| QMTESTFLAGS= |
| |
| # The flags to pass to "qmtest run". |
| QMTESTRUNFLAGS=-f none --result-stream dejagnu_stream.DejaGNUStream |
| |
| # The command to use to invoke qmtest. |
| QMTEST=${QMTEST_PATH} ${QMTESTFLAGS} |
| |
| # The tests (or suites) to run. |
| QMTEST_GPP_TESTS=g++ |
| |
| # The subdirectory of the OBJDIR that will be used to store the QMTest |
| # test database configuration and that will be used for temporary |
| # scratch space during QMTest's execution. |
| QMTEST_DIR=qmtestsuite |
| |
| # Create the QMTest database configuration. |
| ${QMTEST_DIR} stamp-qmtest: |
| ${QMTEST} -D ${QMTEST_DIR} create-tdb \ |
| -c gcc_database.GCCDatabase \ |
| -a srcdir=`cd ${srcdir}/testsuite && ${PWD_COMMAND}` && \ |
| $(STAMP) stamp-qmtest |
| |
| # Create the QMTest context file. |
| ${QMTEST_DIR}/context: stamp-qmtest |
| rm -f $@ |
| echo "CompilerTable.languages=c cplusplus" >> $@ |
| echo "CompilerTable.c_kind=GCC" >> $@ |
| echo "CompilerTable.c_path=${objdir}/xgcc" >> $@ |
| echo "CompilerTable.c_options=-B${objdir}/" >> $@ |
| echo "CompilerTable.cplusplus_kind=GCC" >> $@ |
| echo "CompilerTable.cplusplus_path=${objdir}/g++" >> $@ |
| echo "CompilerTable.cplusplus_options=-B${objdir}/" >> $@ |
| echo "DejaGNUTest.target=${target_noncanonical}" >> $@ |
| |
| # Run the G++ testsuite using QMTest. |
| qmtest-g++: ${QMTEST_DIR}/context |
| cd ${QMTEST_DIR} && ${QMTEST} run ${QMTESTRUNFLAGS} -C context \ |
| -o g++.qmr ${QMTEST_GPP_TESTS} |
| |
| # Use the QMTest GUI. |
| qmtest-gui: ${QMTEST_DIR}/context |
| cd ${QMTEST_DIR} && ${QMTEST} gui -C context |
| |
| .PHONY: qmtest-g++ |
| |
| # Run Paranoia on real.c. |
| |
| paranoia.o: $(srcdir)/../contrib/paranoia.cc $(CONFIG_H) $(SYSTEM_H) \ |
| real.h $(TREE_H) |
| g++ -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $< $(OUTPUT_OPTION) |
| |
| paranoia: paranoia.o real.o $(LIBIBERTY) |
| g++ -o $@ paranoia.o real.o $(LIBIBERTY) |
| |
| # These exist for maintenance purposes. |
| |
| # Update the tags table. |
| TAGS: lang.tags |
| (cd $(srcdir); \ |
| incs= ; \ |
| list='$(SUBDIRS)'; for dir in $$list; do \ |
| if test -f $$dir/TAGS; then \ |
| incs="$$incs --include $$dir/TAGS.sub"; \ |
| fi; \ |
| done; \ |
| mkdir tmp-tags; \ |
| mv -f c-parse.[ch] tmp-tags; \ |
| etags -o TAGS.sub *.y *.h *.c; \ |
| mv tmp-tags/* .; \ |
| rmdir tmp-tags; \ |
| etags --include TAGS.sub $$incs) |
| |
| # ------------------------------------------------------ |
| # Bootstrap-related targets (not used during 'make all') |
| # ------------------------------------------------------ |
| |
| # A list of files to be destroyed during "lean" builds. |
| VOL_FILES=`echo $(BACKEND) $(OBJS) $(C_OBJS) $(LIBCPP_OBJS) *.c *.h gen*` |
| |
| # Flags to pass to stage2 and later recursive makes. Note that the |
| # WARN_CFLAGS setting can't be to the expansion of GCC_WARN_CFLAGS in |
| # the context of the stage_x rule. |
| |
| POSTSTAGE1_FLAGS_TO_PASS = \ |
| ADAFLAGS="$(BOOT_ADAFLAGS)" \ |
| CFLAGS="$(BOOT_CFLAGS)" \ |
| LDFLAGS="$(BOOT_LDFLAGS)" \ |
| WARN_CFLAGS="\$$(GCC_WARN_CFLAGS)" \ |
| STRICT_WARN="$(STRICT2_WARN)" \ |
| libdir=$(libdir) \ |
| LANGUAGES="$(LANGUAGES)" \ |
| MAKEINFO="$(MAKEINFO)" \ |
| MAKEINFOFLAGS="$(MAKEINFOFLAGS)" \ |
| MAKEOVERRIDES= \ |
| OUTPUT_OPTION="-o \$$@" |
| |
| STAGE2_FLAGS_TO_PASS = \ |
| CFLAGS="$(BOOT_CFLAGS)" \ |
| WERROR="@WERROR@" \ |
| |
| STAGEPROFILE_FLAGS_TO_PASS = \ |
| CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" |
| |
| # Files never linked into the final executable produces warnings about missing |
| # profile. |
| STAGEFEEDBACK_FLAGS_TO_PASS = \ |
| CFLAGS="$(BOOT_CFLAGS) -fprofile-use" |
| |
| # Only build the C compiler for stage1, because that is the only one that |
| # we can guarantee will build with the native compiler, and also it is the |
| # only thing useful for building stage2. STAGE1_CFLAGS (via CFLAGS), |
| # MAKEINFO and MAKEINFOFLAGS are explicitly passed here to make them |
| # overrideable (for a bootstrap build stage1 also builds gcc.info). |
| stage1_build: |
| $(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES="$(BOOT_LANGUAGES)" \ |
| CFLAGS="$(STAGE1_CFLAGS)" MAKEINFO="$(MAKEINFO)" \ |
| MAKEINFOFLAGS="$(MAKEINFOFLAGS)" COVERAGE_FLAGS= \ |
| OBJS-onestep="$(OBJS)" |
| $(STAMP) stage1_build |
| echo stage1_build > stage_last |
| |
| stage1_copy: stage1_build |
| $(MAKE) stage1 |
| $(STAMP) stage1_copy |
| echo stage2_build > stage_last |
| |
| stage2_build: stage1_copy |
| $(MAKE) CC="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" \ |
| STAGE_PREFIX=stage1/ \ |
| $(POSTSTAGE1_FLAGS_TO_PASS) \ |
| $(STAGE2_FLAGS_TO_PASS) |
| $(STAMP) stage2_build |
| echo stage2_build > stage_last |
| |
| stage2_copy: stage2_build |
| $(MAKE) stage2 |
| $(STAMP) stage2_copy |
| echo stage3_build > stage_last |
| |
| stageprofile_build: stage1_copy |
| $(MAKE) CC="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" \ |
| STAGE_PREFIX=stage1/ \ |
| $(POSTSTAGE1_FLAGS_TO_PASS) \ |
| $(STAGEPROFILE_FLAGS_TO_PASS) |
| $(STAMP) stageprofile_build |
| echo stageprofile_build > stage_last |
| |
| stageprofile_copy: stageprofile_build |
| $(MAKE) stageprofile |
| $(STAMP) stageprofile_copy |
| echo stagefeedback_build > stage_last |
| |
| stage3_build: stage2_copy |
| $(MAKE) CC="$(STAGE_CC_WRAPPER) stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage2/xgcc$(exeext) -Bstage2/ -B$(build_tooldir)/bin/" \ |
| STAGE_PREFIX=stage2/ \ |
| $(POSTSTAGE1_FLAGS_TO_PASS) \ |
| $(STAGE2_FLAGS_TO_PASS) |
| $(STAMP) stage3_build |
| echo stage3_build > stage_last |
| |
| stagefeedback_build: stageprofile_copy stage1_copy |
| $(MAKE) CC="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage1/xgcc$(exeext) -Bstage1/ -B$(build_tooldir)/bin/" \ |
| STAGE_PREFIX=stage1/ \ |
| $(POSTSTAGE1_FLAGS_TO_PASS) \ |
| $(STAGEFEEDBACK_FLAGS_TO_PASS) |
| $(STAMP) stagefeedback_build |
| echo stagefeedback_build > stage_last |
| |
| stagefeedback_copy: stagefeedback_build |
| $(MAKE) stagefeedback |
| $(STAMP) stagefeedback_copy |
| echo stagefeedback2_build > stage_last |
| |
| # For bootstrap4: |
| stage3_copy: stage3_build |
| $(MAKE) stage3 |
| $(STAMP) stage3_copy |
| echo stage4_build > stage_last |
| |
| stage4_build: stage3_copy |
| $(MAKE) CC="$(STAGE_CC_WRAPPER) stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" CC_FOR_BUILD="$(STAGE_CC_WRAPPER) stage3/xgcc$(exeext) -Bstage3/ -B$(build_tooldir)/bin/" \ |
| STAGE_PREFIX=stage3/ \ |
| $(POSTSTAGE1_FLAGS_TO_PASS) \ |
| $(STAGE2_FLAGS_TO_PASS) |
| $(STAMP) stage4_build |
| echo stage4_build > stage_last |
| |
| # Additional steps for *-lean targets: |
| clean_s1: stage1_copy |
| -(cd stage1 && rm -f $(VOL_FILES)) |
| $(STAMP) clean_s1 |
| |
| clean_s2: stage2_copy |
| -rm -rf stage1 |
| $(STAMP) clean_s2 |
| |
| # The various entry points for bootstrapping. |
| |
| bootstrap: stage3_build |
| @echo |
| @echo Bootstrap complete - make \"quickstrap\" to redo last build, |
| @echo \"restage1\" through \"restage3\" to rebuild specific stages, |
| @echo \"restrap\" to redo the bootstrap from stage1, or |
| @echo \"cleanstrap\" to redo the bootstrap from scratch. |
| |
| bootstrap-lean : clean_s1 clean_s2 stage3_build |
| @echo |
| @echo Bootstrap complete - make \"quickstrap\" to redo last build, |
| @echo or \"cleanstrap\" to redo the bootstrap from scratch. |
| |
| bootstrap2: bootstrap |
| |
| bootstrap2-lean : bootstrap-lean |
| |
| bootstrap3 bootstrap3-lean: bootstrap |
| |
| bootstrap4 bootstrap4-lean: stage4_build |
| |
| unstage1 unstage2 unstage3 unstage4 unstageprofile unstagefeedback: |
| -set -vx; stage=`echo $@ | sed -e 's/un//'`; \ |
| rm -f $$stage/as$(exeext); \ |
| rm -f $$stage/ld$(exeext); \ |
| rm -f $$stage/collect-ld$(exeext); \ |
| if test -d $$stage; then \ |
| mv $$stage/specs $(SPECS) 2>/dev/null || :; \ |
| mv $$stage/* . 2>/dev/null; \ |
| for i in `cd $$stage; echo *` ; do \ |
| if test -d $$stage/$$i; then \ |
| mv $$stage/$$i/* $$i/. 2>/dev/null; \ |
| else \ |
| mv $$stage/$$i .; \ |
| fi; \ |
| done \ |
| fi ; \ |
| rm -f $${stage}_build $${stage}_copy ;\ |
| echo $${stage}_build > stage_last |
| |
| restage1: unstage1 |
| $(MAKE) $(REMAKEFLAGS) stage1_build |
| |
| restage2: unstage2 |
| $(MAKE) $(REMAKEFLAGS) stage2_build |
| |
| restage3: unstage3 |
| $(MAKE) $(REMAKEFLAGS) stage3_build |
| |
| restage4: unstage4 |
| $(MAKE) $(REMAKEFLAGS) stage4_build |
| |
| restageprofile: unstageprofile |
| $(MAKE) $(REMAKEFLAGS) stageprofile_build |
| |
| restagefeedback: unstagefeedback |
| $(MAKE) $(REMAKEFLAGS) stagefeedback_build |
| |
| # Bubble up a bugfix through all the stages. Primarily useful for fixing |
| # bugs that cause the compiler to crash while building stage 2. |
| bubblestrap: |
| if test -f stage_last; then \ |
| LAST=`sed -e 's/_build//' < stage_last`; \ |
| if test "$$LAST" != "stage1"; then \ |
| $(MAKE) $(REMAKEFLAGS) $$LAST; \ |
| $(STAMP) $${LAST}_copy; \ |
| fi; \ |
| fi |
| if test -f stage1_copy; then $(MAKE) unstage1; fi |
| $(MAKE) $(REMAKEFLAGS) stage1_copy |
| if test -f stage2_copy; then $(MAKE) unstage2; fi |
| $(MAKE) $(REMAKEFLAGS) stage2_copy |
| if test -f stage3_copy; then $(MAKE) unstage3; fi |
| $(MAKE) $(REMAKEFLAGS) stage3_build |
| if test -f stage4_copy; then \ |
| $(MAKE) $(REMAKEFLAGS) stage3_copy; $(MAKE) unstage4; \ |
| $(MAKE) $(REMAKEFLAGS) stage4_build || exit 1; \ |
| fi |
| |
| quickstrap: |
| if test -f stage_last ; then \ |
| LAST=`cat stage_last`; rm $$LAST; $(MAKE) $(REMAKEFLAGS) $$LAST; \ |
| else \ |
| $(MAKE) $(REMAKEFLAGS) stage1_build; \ |
| fi |
| |
| cleanstrap: |
| -$(MAKE) clean |
| $(MAKE) $(REMAKEFLAGS) bootstrap |
| |
| unstrap: |
| -rm -rf stage[234]* |
| $(MAKE) unstage1 |
| -rm -f stage_last |
| |
| # Differs from cleanstrap in that it starts from the earlier stage1 build, |
| # not from scratch. |
| restrap: |
| $(MAKE) unstrap |
| $(MAKE) $(REMAKEFLAGS) bootstrap |
| |
| # These targets compare the object files in the current directory with |
| # those in a stage directory. We need to skip the first N bytes of |
| # each object file. The "slow" mechanism assumes nothing special |
| # about cmp and uses the tail command to skip. ./ avoids a bug in |
| # some versions of tail. The "gnu" targets use gnu cmp (diffutils |
| # v2.4 or later), to avoid running tail and the overhead of twice |
| # copying each object file. Likewise, the "fast" targets use the skip |
| # parameter of cmp available on some systems to accomplish the same |
| # thing. An exit status of 1 is precisely the result we're looking |
| # for (other values mean other problems). |
| slowcompare slowcompare3 slowcompare4 slowcompare-lean slowcompare3-lean slowcompare4-lean \ |
| fastcompare fastcompare3 fastcompare4 fastcompare-lean fastcompare3-lean fastcompare4-lean \ |
| gnucompare gnucompare3 gnucompare4 gnucompare-lean gnucompare3-lean gnucompare4-lean: force |
| -rm -f .bad_compare |
| case "$@" in *compare | *compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^[a-z]*compare\([0-9][0-9]*\).*,\1,'` ;; esac; \ |
| for dir in . $(SUBDIRS); do \ |
| if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \ |
| for file in $$dir/*$(objext); do \ |
| case "$@" in \ |
| slowcompare* ) \ |
| tail +16c ./$$file > tmp-foo1; \ |
| tail +16c stage$$stage/$$file > tmp-foo2 \ |
| && (cmp tmp-foo1 tmp-foo2 > /dev/null 2>&1 || echo $$file differs >> .bad_compare) || true; \ |
| ;; \ |
| fastcompare* ) \ |
| cmp $$file stage$$stage/$$file 16 16 > /dev/null 2>&1; \ |
| test $$? -eq 1 && echo $$file differs >> .bad_compare || true; \ |
| ;; \ |
| gnucompare* ) \ |
| cmp --ignore-initial=16 $$file stage$$stage/$$file > /dev/null 2>&1; \ |
| test $$? -eq 1 && echo $$file differs >> .bad_compare || true; \ |
| ;; \ |
| esac ; \ |
| done; \ |
| else true; fi; \ |
| done |
| -rm -f tmp-foo* |
| case "$@" in *compare | *compare-lean ) stage=2 ;; * ) stage=`echo $@ | sed -e 's,^[a-z]*compare\([0-9][0-9]*\).*,\1,'` ;; esac; \ |
| if [ -f .bad_compare ]; then \ |
| echo "Bootstrap comparison failure!"; \ |
| cat .bad_compare; \ |
| exit 1; \ |
| else \ |
| case "$@" in \ |
| *-lean ) rm -rf stage$$stage ;; \ |
| *) ;; \ |
| esac; true; \ |
| fi |
| |
| # Forwarding wrappers to the most appropriate version. |
| compare: @make_compare_target@ |
| compare3: @make_compare_target@3 |
| compare4: @make_compare_target@4 |
| compare-lean: @make_compare_target@-lean |
| compare3-lean: @make_compare_target@3-lean |
| compare4-lean: @make_compare_target@4-lean |
| |
| # Copy the object files from a particular stage into a subdirectory. |
| stage1-start: |
| -if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi |
| $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage1 |
| -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \ |
| do \ |
| if [ -d stage1/$$dir ] ; then true ; else mkdir stage1/$$dir ; fi ; \ |
| done |
| # If SPECS is overridden, make sure it is `installed' as specs. |
| -mv $(SPECS) stage1/specs |
| -mv $(STAGESTUFF) stage1 |
| # Copy as/ld if they exist to stage dir, so that running xgcc from the stage |
| # dir will work properly. |
| -if [ -f as$(exeext) ] ; then (cd stage1 && $(LN_S) ../as$(exeext) .) ; else true ; fi |
| -if [ -f ld$(exeext) ] ; then (cd stage1 && $(LN_S) ../ld$(exeext) .) ; else true ; fi |
| -if [ -f collect-ld$(exeext) ] ; then (cd stage1 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi |
| -rm -f stage1/libgcc.a stage1/libgcc_eh.a stage1/libgcov.a |
| -rm -f stage1/libgcc_s*$(SHLIB_EXT) |
| -cp libgcc.a stage1 |
| -$(RANLIB_FOR_TARGET) stage1/libgcc.a |
| -cp libgcov.a stage1 |
| -$(RANLIB_FOR_TARGET) stage1/libgcov.a |
| -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage1; \ |
| $(RANLIB_FOR_TARGET) stage1/libgcc_eh.a; \ |
| fi |
| -cp libgcc_s*$(SHLIB_EXT) stage1 |
| -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \ |
| cp stage1/$${f} . ; \ |
| else true; \ |
| fi; done |
| stage1: force stage1-start lang.stage1 |
| -for dir in . $(SUBDIRS) ; \ |
| do \ |
| rm -f $$dir/*$(coverageexts) ; \ |
| done |
| |
| stage2-start: |
| -if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi |
| $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage2 |
| -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \ |
| do \ |
| if [ -d stage2/$$dir ] ; then true ; else mkdir stage2/$$dir ; fi ; \ |
| done |
| # If SPECS is overridden, make sure it is `installed' as specs. |
| -mv $(SPECS) stage2/specs |
| -mv $(STAGESTUFF) stage2 |
| # Copy as/ld if they exist to stage dir, so that running xgcc from the stage |
| # dir will work properly. |
| -if [ -f as$(exeext) ] ; then (cd stage2 && $(LN_S) ../as$(exeext) .) ; else true ; fi |
| -if [ -f ld$(exeext) ] ; then (cd stage2 && $(LN_S) ../ld$(exeext) .) ; else true ; fi |
| -if [ -f collect-ld$(exeext) ] ; then (cd stage2 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi |
| -rm -f stage2/libgcc.a stage2/libgcov.a stage2/libgcc_eh.a |
| -rm -f stage2/libgcc_s*$(SHLIB_EXT) |
| -cp libgcc.a stage2 |
| -$(RANLIB_FOR_TARGET) stage2/libgcc.a |
| -cp libgcov.a stage2 |
| -$(RANLIB_FOR_TARGET) stage2/libgcov.a |
| -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage2; \ |
| $(RANLIB_FOR_TARGET) stage2/libgcc_eh.a; \ |
| fi |
| -cp libgcc_s*$(SHLIB_EXT) stage2 |
| -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \ |
| cp stage2/$${f} . ; \ |
| else true; \ |
| fi; done |
| stage2: force stage2-start lang.stage2 |
| |
| stage3-start: |
| -if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi |
| $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage3 |
| -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \ |
| do \ |
| if [ -d stage3/$$dir ] ; then true ; else mkdir stage3/$$dir ; fi ; \ |
| done |
| # If SPECS is overridden, make sure it is `installed' as specs. |
| -mv $(SPECS) stage3/specs |
| -mv $(STAGESTUFF) stage3 |
| # Copy as/ld if they exist to stage dir, so that running xgcc from the stage |
| # dir will work properly. |
| -if [ -f as$(exeext) ] ; then (cd stage3 && $(LN_S) ../as$(exeext) .) ; else true ; fi |
| -if [ -f ld$(exeext) ] ; then (cd stage3 && $(LN_S) ../ld$(exeext) .) ; else true ; fi |
| -if [ -f collect-ld$(exeext) ] ; then (cd stage3 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi |
| -rm -f stage3/libgcc.a stage3/libgcov.a stage3/libgcc_eh.a |
| -rm -f stage3/libgcc_s*$(SHLIB_EXT) |
| -cp libgcc.a stage3 |
| -$(RANLIB_FOR_TARGET) stage3/libgcc.a |
| -cp libgcov.a stage3 |
| -$(RANLIB_FOR_TARGET) stage3/libgcov.a |
| -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage3; \ |
| $(RANLIB_FOR_TARGET) stage3/libgcc_eh.a; \ |
| fi |
| -cp libgcc_s*$(SHLIB_EXT) stage3 |
| -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \ |
| cp stage3/$${f} . ; \ |
| else true; \ |
| fi; done |
| stage3: force stage3-start lang.stage3 |
| |
| stage4-start: |
| -if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi |
| $(MAKE) -f libgcc.mk libgcc-stage-start stage=stage4 |
| -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \ |
| do \ |
| if [ -d stage4/$$dir ] ; then true ; else mkdir stage4/$$dir ; fi ; \ |
| done |
| # If SPECS is overridden, make sure it is `installed' as specs. |
| -mv $(SPECS) stage4/specs |
| -mv $(STAGESTUFF) stage4 |
| # Copy as/ld if they exist to stage dir, so that running xgcc from the stage |
| # dir will work properly. |
| -if [ -f as$(exeext) ] ; then (cd stage4 && $(LN_S) ../as$(exeext) .) ; else true ; fi |
| -if [ -f ld$(exeext) ] ; then (cd stage4 && $(LN_S) ../ld$(exeext) .) ; else true ; fi |
| -if [ -f collect-ld$(exeext) ] ; then (cd stage4 && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi |
| -rm -f stage4/libgcc.a stage4/libgcov.a stage4/libgcc_eh.a |
| -rm -f stage4/libgcc_s*$(SHLIB_EXT) |
| -cp libgcc.a stage4 |
| -$(RANLIB_FOR_TARGET) stage4/libgcc.a |
| -cp libgcov.a stage4 |
| -$(RANLIB_FOR_TARGET) stage4/libgcov.a |
| -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stage4; \ |
| $(RANLIB_FOR_TARGET) stage4/libgcc_eh.a; \ |
| fi |
| -cp libgcc_s*$(SHLIB_EXT) stage4 |
| -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \ |
| cp stage4/$${f} . ; \ |
| else true; \ |
| fi; done |
| stage4: force stage4-start lang.stage4 |
| |
| stageprofile-start: |
| -if [ -d stageprofile ] ; then true ; else mkdir stageprofile ; fi |
| $(MAKE) -f libgcc.mk libgcc-stage-start stage=stageprofile |
| -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \ |
| do \ |
| if [ -d stageprofile/$$dir ] ; then true ; else mkdir stageprofile/$$dir ; fi ; \ |
| done |
| -mv $(STAGESTUFF) stageprofile |
| # Copy as/ld if they exist to stage dir, so that running xgcc from the stage |
| # dir will work properly. |
| -if [ -f as$(exeext) ] ; then (cd stageprofile && $(LN_S) ../as$(exeext) .) ; else true ; fi |
| -if [ -f ld$(exeext) ] ; then (cd stageprofile && $(LN_S) ../ld$(exeext) .) ; else true ; fi |
| -if [ -f collect-ld$(exeext) ] ; then (cd stageprofile && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi |
| -rm -f stageprofile/libgcc.a stageprofile/libgcov.a stageprofile/libgcc_eh.a |
| -rm -f stageprofile/libgcc_s*$(SHLIB_EXT) |
| -cp libgcc.a stageprofile |
| -$(RANLIB_FOR_TARGET) stageprofile/libgcc.a |
| -cp libgcov.a stageprofile |
| -$(RANLIB_FOR_TARGET) stageprofile/libgcov.a |
| -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stageprofile; \ |
| $(RANLIB_FOR_TARGET) stageprofile/libgcc_eh.a; \ |
| fi |
| -cp libgcc_s*$(SHLIB_EXT) stageprofile |
| -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \ |
| cp stageprofile/$${f} . ; \ |
| else true; \ |
| fi; done |
| stageprofile: force stageprofile-start lang.stageprofile |
| |
| stagefeedback-start: |
| -if [ -d stagefeedback ] ; then true ; else mkdir stagefeedback ; fi |
| $(MAKE) -f libgcc.mk libgcc-stage-start stage=stagefeedback |
| -subdirs="$(SUBDIRS)"; for dir in $$subdirs; \ |
| do \ |
| if [ -d stagefeedback/$$dir ] ; then true ; else mkdir stagefeedback/$$dir ; fi ; \ |
| done |
| -mv $(STAGESTUFF) stagefeedback |
| # Copy as/ld if they exist to stage dir, so that running xgcc from the stage |
| # dir will work properly. |
| -if [ -f as$(exeext) ] ; then (cd stagefeedback && $(LN_S) ../as$(exeext) .) ; else true ; fi |
| -if [ -f ld$(exeext) ] ; then (cd stagefeedback && $(LN_S) ../ld$(exeext) .) ; else true ; fi |
| -if [ -f collect-ld$(exeext) ] ; then (cd stagefeedback && $(LN_S) ../collect-ld$(exeext) .) ; else true ; fi |
| -rm -f stagefeedback/libgcc.a stagefeedback/libgcov.a stagefeedback/libgcc_eh.a |
| -rm -f stagefeedback/libgcc_s*$(SHLIB_EXT) |
| -rm -f *.da |
| -for dir in fixinc po testsuite $(SUBDIRS); \ |
| do \ |
| rm -f $$dir/*.da ; \ |
| done |
| -cp libgcc.a stagefeedback |
| -$(RANLIB_FOR_TARGET) stagefeedback/libgcc.a |
| -cp libgcov.a stagefeedback |
| -$(RANLIB_FOR_TARGET) stagefeedback/libgcov.a |
| -if [ -f libgcc_eh.a ] ; then cp libgcc_eh.a stagefeedback; \ |
| $(RANLIB_FOR_TARGET) stagefeedback/libgcc_eh.a; \ |
| fi |
| -cp libgcc_s*$(SHLIB_EXT) stagefeedback |
| -for f in .. $(EXTRA_MULTILIB_PARTS); do if [ x$${f} != x.. ]; then \ |
| cp stagefeedback/$${f} . ; \ |
| else true; \ |
| fi; done |
| stagefeedback: force stagefeedback-start lang.stagefeedback |
| |
| # Copy just the executable files from a particular stage into a subdirectory, |
| # and delete the object files. Use this if you're just verifying a version |
| # that is pretty sure to work, and you are short of disk space. |
| risky-stage1: stage1 |
| -$(MAKE) clean |
| |
| risky-stage2: stage2 |
| -$(MAKE) clean |
| |
| risky-stage3: stage3 |
| -$(MAKE) clean |
| |
| risky-stage4: stage4 |
| -$(MAKE) clean |
| |
| #In GNU Make, ignore whether `stage*' exists. |
| .PHONY: stage1 stage2 stage3 stage4 clean maintainer-clean TAGS bootstrap |
| .PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4 |
| .PHONY: stagefeedback stageprofile |
| |
| # ----------------------------------------------------- |
| # Rules for generating translated message descriptions. |
| # Disabled by autoconf if the tools are not available. |
| # ----------------------------------------------------- |
| |
| XGETTEXT = @XGETTEXT@ |
| GMSGFMT = @GMSGFMT@ |
| MSGMERGE = msgmerge |
| |
| PACKAGE = @PACKAGE@ |
| CATALOGS = @CATALOGS@ |
| |
| .PHONY: build- install- build-po install-po update-po |
| |
| # Dummy rules to deal with dependencies produced by use of |
| # "build-@POSUB@" and "install-@POSUB@" above, when NLS is disabled. |
| build-: ; @true |
| install-: ; @true |
| |
| build-po: $(CATALOGS) |
| |
| # This notation should be acceptable to all Make implementations used |
| # by people who are interested in updating .po files. |
| update-po: $(CATALOGS:.gmo=.pox) |
| |
| # N.B. We do not attempt to copy these into $(srcdir). The snapshot |
| # script does that. |
| .po.gmo: |
| -test -d po || mkdir po |
| $(GMSGFMT) --statistics -o $@ $< |
| |
| # The new .po has to be gone over by hand, so we deposit it into |
| # build/po with a different extension. |
| # If build/po/$(PACKAGE).pot exists, use it (it was just created), |
| # else use the one in srcdir. |
| .po.pox: |
| -test -d po || mkdir po |
| $(MSGMERGE) $< `if test -f po/$(PACKAGE).pot; \ |
| then echo po/$(PACKAGE).pot; \ |
| else echo $(srcdir)/po/$(PACKAGE).pot; fi` -o $@ |
| |
| # This rule has to look for .gmo modules in both srcdir and |
| # the cwd, and has to check that we actually have a catalog |
| # for each language, in case they weren't built or included |
| # with the distribution. |
| install-po: |
| $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$(datadir) |
| cats="$(CATALOGS)"; for cat in $$cats; do \ |
| lang=`basename $$cat | sed 's/\.gmo$$//'`; \ |
| if [ -f $$cat ]; then :; \ |
| elif [ -f $(srcdir)/$$cat ]; then cat=$(srcdir)/$$cat; \ |
| else continue; \ |
| fi; \ |
| dir=$(localedir)/$$lang/LC_MESSAGES; \ |
| echo $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$$dir; \ |
| $(SHELL) $(srcdir)/mkinstalldirs $(DESTDIR)$$dir || exit 1; \ |
| echo $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \ |
| $(INSTALL_DATA) $$cat $(DESTDIR)$$dir/$(PACKAGE).mo; \ |
| done |
| |
| # Rule for regenerating the message template (gcc.pot). |
| # Instead of forcing everyone to edit POTFILES.in, which proved impractical, |
| # this rule has no dependencies and always regenerates gcc.pot. This is |
| # relatively harmless since the .po files do not directly depend on it. |
| # Note that exgettext has an awk script embedded in it which requires a |
| # fairly modern (POSIX-compliant) awk. |
| # The .pot file is left in the build directory. |
| $(PACKAGE).pot: po/$(PACKAGE).pot |
| po/$(PACKAGE).pot: force options.c |
| -test -d po || mkdir po |
| $(MAKE) srcextra |
| AWK=$(AWK) $(SHELL) $(srcdir)/po/exgettext \ |
| $(XGETTEXT) $(PACKAGE) $(srcdir) |
