| ------------------------------------------------------------------------------ |
| -- -- |
| -- GNAT COMPILER COMPONENTS -- |
| -- -- |
| -- U N A M E -- |
| -- -- |
| -- S p e c -- |
| -- -- |
| -- Copyright (C) 1992-1998, Free Software Foundation, Inc. -- |
| -- -- |
| -- GNAT is free software; you can redistribute it and/or modify it under -- |
| -- terms of the GNU General Public License as published by the Free Soft- -- |
| -- ware Foundation; either version 2, or (at your option) any later ver- -- |
| -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- |
| -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- |
| -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- |
| -- for more details. You should have received a copy of the GNU General -- |
| -- Public License distributed with GNAT; see file COPYING. If not, write -- |
| -- to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, -- |
| -- MA 02111-1307, USA. -- |
| -- -- |
| -- As a special exception, if other files instantiate generics from this -- |
| -- unit, or you link this unit with other files to produce an executable, -- |
| -- this unit does not by itself cause the resulting executable to be -- |
| -- covered by the GNU General Public License. This exception does not -- |
| -- however invalidate any other reasons why the executable file might be -- |
| -- covered by the GNU Public License. -- |
| -- -- |
| -- GNAT was originally developed by the GNAT team at New York University. -- |
| -- Extensive contributions were provided by Ada Core Technologies Inc. -- |
| -- -- |
| ------------------------------------------------------------------------------ |
| |
| with Types; use Types; |
| package Uname is |
| |
| --------------------------- |
| -- Unit Name Conventions -- |
| --------------------------- |
| |
| -- Units are associated with a unique ASCII name as follows. First we |
| -- have the fully expanded name of the unit, with lower case letters |
| -- (except for the use of upper case letters for encoding upper half |
| -- and wide characters, as described in Namet), and periods. Following |
| -- this is one of the following suffixes: |
| |
| -- %s for package/subprogram/generic declarations (specs) |
| -- %b for package/subprogram/generic bodies and subunits |
| |
| -- Unit names are stored in the names table, and referred to by the |
| -- corresponding Name_Id values. The subtype Unit_Name, which is a |
| -- synonym for Name_Id, is used to indicate that a Name_Id value that |
| -- holds a unit name (as defined above) is expected. |
| |
| -- Note: as far as possible the conventions for unit names are encapsulated |
| -- in this package. The one exception is that package Fname, which provides |
| -- conversion routines from unit names to file names must be aware of the |
| -- precise conventions that are used. |
| |
| ------------------- |
| -- Display Names -- |
| ------------------- |
| |
| -- For display purposes, unit names are printed out with the suffix |
| -- " (body)" for a body and " (spec)" for a spec. These formats are |
| -- used for the Write_Unit_Name and Get_Unit_Name_String subprograms. |
| |
| ----------------- |
| -- Subprograms -- |
| ----------------- |
| |
| function Get_Body_Name (N : Unit_Name_Type) return Unit_Name_Type; |
| -- Given the name of a spec, this function returns the name of the |
| -- corresponding body, i.e. characters %s replaced by %b |
| |
| function Get_Parent_Body_Name (N : Unit_Name_Type) return Unit_Name_Type; |
| -- Given the name of a subunit, returns the name of the parent body. |
| |
| function Get_Parent_Spec_Name (N : Unit_Name_Type) return Unit_Name_Type; |
| -- Given the name of a child unit spec or body, returns the unit name |
| -- of the parent spec. Returns No_Name if the given name is not the name |
| -- of a child unit. |
| |
| procedure Get_External_Unit_Name_String (N : Unit_Name_Type); |
| -- Given the name of a body or spec unit, this procedure places in |
| -- Name_Buffer the name of the unit with periods replaced by double |
| -- underscores. The spec/body indication is eliminated. The length |
| -- of the stored name is placed in Name_Len. All letters are lower |
| -- case, corresponding to the string used in external names. |
| |
| function Get_Spec_Name (N : Unit_Name_Type) return Unit_Name_Type; |
| -- Given the name of a body, this function returns the name of the |
| -- corresponding spec, i.e. characters %b replaced by %s |
| |
| function Get_Unit_Name (N : Node_Id) return Unit_Name_Type; |
| -- This procedure returns the unit name that corresponds to the given node, |
| -- which is one of the following: |
| -- |
| -- N_Subprogram_Declaration (spec) cases |
| -- N_Package_Declaration |
| -- N_Generic_Declaration |
| -- N_With_Clause |
| -- N_Function_Instantiation |
| -- N_Package_Instantiation |
| -- N_Procedure_Instantiation |
| -- N_Pragma (Elaborate case) |
| -- |
| -- N_Package_Body (body) cases |
| -- N_Subprogram_Body |
| -- N_Identifier |
| -- N_Selected_Component |
| -- |
| -- N_Subprogram_Body_Stub (subunit) cases |
| -- N_Package_Body_Stub |
| -- N_Task_Body_Stub |
| -- N_Protected_Body_Stub |
| -- N_Subunit |
| |
| procedure Get_Unit_Name_String (N : Unit_Name_Type); |
| -- Places the display name of the unit in Name_Buffer and sets Name_Len |
| -- to the length of the stored name, i.e. it uses the same interface as |
| -- the Get_Name_String routine in the Namet package. The name contains |
| -- an indication of spec or body, and is decoded. |
| |
| function Is_Body_Name (N : Unit_Name_Type) return Boolean; |
| -- Returns True iff the given name is the unit name of a body (i.e. if |
| -- it ends with the characters %b). |
| |
| function Is_Child_Name (N : Unit_Name_Type) return Boolean; |
| -- Returns True iff the given name is a child unit name (of either a |
| -- body or a spec). |
| |
| function Is_Spec_Name (N : Unit_Name_Type) return Boolean; |
| -- Returns True iff the given name is the unit name of a specification |
| -- (i.e. if it ends with the characters %s). |
| |
| function Name_To_Unit_Name (N : Name_Id) return Unit_Name_Type; |
| -- Given the Id of the Ada name of a unit, this function returns the |
| -- corresponding unit name of the spec (by appending %s to the name). |
| |
| function New_Child |
| (Old : Unit_Name_Type; |
| Newp : Unit_Name_Type) |
| return Unit_Name_Type; |
| -- Old is a child unit name (for either a body or spec). Newp is the |
| -- unit name of the actual parent (this may be different from the |
| -- parent in old). The returned unit name is formed by taking the |
| -- parent name from Newp and the child unit name from Old, with the |
| -- result being a body or spec depending on Old. For example: |
| -- |
| -- Old = A.B.C (body) |
| -- Newp = A.R (spec) |
| -- result = A.R.C (body) |
| -- |
| -- See spec of Load_Unit for extensive discussion of why this routine |
| -- needs to be used (the call in the body of Load_Unit is the only one). |
| |
| function Uname_Ge (Left, Right : Unit_Name_Type) return Boolean; |
| function Uname_Gt (Left, Right : Unit_Name_Type) return Boolean; |
| function Uname_Le (Left, Right : Unit_Name_Type) return Boolean; |
| function Uname_Lt (Left, Right : Unit_Name_Type) return Boolean; |
| -- These functions perform lexicographic ordering of unit names. The |
| -- ordering is suitable for printing, and is not quite a straightforward |
| -- comparison of the names, since the convention is that specs appear |
| -- before bodies. Note that the standard = and /= operators work fine |
| -- because all unit names are hashed into the name table, so if two names |
| -- are the same, they always have the same Name_Id value. |
| |
| procedure Write_Unit_Name (N : Unit_Name_Type); |
| -- Given a unit name, this procedure writes the display name to the |
| -- standard output file. Name_Buffer and Name_Len are set as described |
| -- above for the Get_Unit_Name_String call on return. |
| |
| end Uname; |