;; GCC machine description for CRIS cpu cores. ;; Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. ;; Contributed by Axis Communications.
;; This file is part of GCC. ;; ;; GCC is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 2, or (at your option) ;; any later version. ;; ;; GCC is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; ;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING. If not, write to ;; the Free Software Foundation, 59 Temple Place - Suite 330, ;; Boston, MA 02111-1307, USA.
;; The original PO technology requires these to be ordered by speed, ;; so that assigner will pick the fastest.
;; See files “md.texi” and “rtl.def” for documentation on define_insn, ;; match_*, et. al. ;; ;; The function cris_notice_update_cc in cris.c handles condition code ;; updates for most instructions, helped by the “cc” attribute.
;; There are several instructions that are orthogonal in size, and seems ;; they could be matched by a single pattern without a specified size ;; for the operand that is orthogonal. However, this did not work on ;; gcc-2.7.2 (and probably not on gcc-2.8.1), relating to that when a ;; constant is substituted into an operand, the actual mode must be ;; deduced from the pattern. There is reasonable hope that that has been ;; fixed, so FIXME: try again.
;; You will notice that three-operand alternatives (“=r”, “r”, “!To”) ;; are marked with a “!” constraint modifier to avoid being reloaded ;; into. This is because gcc would otherwise prefer to use the constant ;; pool and its offsettable address instead of reloading to an ;; (“=r”, “0”, “i”) alternative. Also, the constant-pool support was not ;; only suboptimal but also buggy in 2.7.2, ??? maybe only in 2.6.3.
;; All insns that look like (set (...) (plus (...) (reg:SI 8))) ;; get problems when reloading r8 (frame pointer) to r14 + offs (stack ;; pointer). Thus the instructions that get into trouble have specific ;; checks against matching frame_pointer_rtx. ;; ??? But it should be re-checked for gcc > 2.7.2 ;; FIXME: This changed some time ago (from 2000-03-16) for gcc-2.9x.
;; FIXME: When PIC, all [rX=rY+S] could be enabled to match ;; [rX=gotless_symbol]. ;; The movsi for a gotless symbol could be split (post reload). ;; UNSPEC Usage: ;; 0 PLT reference from call expansion: operand 0 is the address, ;; the mode is VOIDmode. Always wrapped in CONST.
;; We need an attribute to define whether an instruction can be put in ;; a branch-delay slot or not, and whether it has a delay slot. ;; ;; Branches and return instructions have a delay slot, and cannot ;; themselves be put in a delay slot. This has changed for short ;; branches only between architecture variants, but the possible win ;; is presumed negligible compared to the added complexity of the machine ;; description: one would have to add always-correct infrastructure to ;; distinguish short branches. ;; ;; Whether an instruction can be put in a delay slot depends on the ;; instruction (all short instructions except jumps and branches) ;; and the addressing mode (must not be prefixed or referring to pc). ;; In short, any “slottable” instruction must be 16 bit and not refer ;; to pc, or alter it. ;; ;; The possible values are “yes”, “no” and “has_slot”. Yes/no means if ;; the insn is slottable or not. Has_slot means that the insn is a ;; return insn or branch insn (which are not considered slottable since ;; that is generally true). Having the seemingly illogical value ;; “has_slot” means we do not have to add another attribute just to say ;; that an insn has a delay-slot, since it also infers that it is not ;; slottable. Better names for the attribute were found to be longer and ;; not add readability to the machine description. ;; ;; The default that is defined here for this attribute is “no”, not ;; slottable, not having a delay-slot, so there's no need to worry about ;; it being wrong for non-branch and return instructions. ;; The default could depend on the kind of insn and the addressing ;; mode, but that would need more attributes and hairier, more error ;; prone code. ;; ;; There is an extra constraint, ‘Q’, which recognizes indirect reg, ;; except when the reg is pc. The constraints ‘Q’ and ‘>’ together match ;; all possible memory operands that are slottable. ;; For other operands, you need to check if it has a valid “slottable” ;; quick-immediate operand, where the particular signedness-variation ;; may match the constraints ‘I’ or ‘J’.), and include it in the ;; constraint pattern for the slottable pattern. An alternative using ;; only “r” constraints is most often slottable.
(define_attr “slottable” “no,yes,has_slot” (const_string “no”))
;; We also need attributes to sanely determine the condition code ;; state. See cris_notice_update_cc for how this is used.
(define_attr “cc” “none,clobber,normal” (const_string “normal”))
;; A branch or return has one delay-slot. The instruction in the ;; delay-slot is always executed, independent of whether the branch is ;; taken or not. Note that besides setting “slottable” to “has_slot”, ;; there also has to be a “%#” at the end of a “delayed” instruction ;; output pattern (for “jump” this means “ba %l0%#”), so print_operand can ;; catch it and print a “nop” if necessary. This method was stolen from ;; sparc.md.
(define_delay (eq_attr “slottable” “has_slot”) [(eq_attr “slottable” “yes”) (nil) (nil)]) ;; Test insns.
;; DImode ;; ;; Allow register and offsettable mem operands only; post-increment is ;; not worth the trouble.
(define_insn “tstdi” [(set (cc0) (match_operand:DI 0 “nonimmediate_operand” “r,o”))] "" “test.d %M0;ax;test.d %H0”)
;; No test insns with side-effect on the mem addressing. ;; ;; See note on cmp-insns with side-effects (or lack of them)
;; Normal named test patterns from SI on. ;; FIXME: Seems they should change to be in order smallest..largest.
(define_insn “tstsi” [(set (cc0) (match_operand:SI 0 “nonimmediate_operand” “r,Q>,m”))] "" “test.d %0” [(set_attr “slottable” “yes,yes,no”)])
(define_insn “tsthi” [(set (cc0) (match_operand:HI 0 “nonimmediate_operand” “r,Q>,m”))] "" “test.w %0” [(set_attr “slottable” “yes,yes,no”)])
(define_insn “tstqi” [(set (cc0) (match_operand:QI 0 “nonimmediate_operand” “r,Q>,m”))] "" “test.b %0” [(set_attr “slottable” “yes,yes,no”)])
;; It seems that the position of the sign-bit and the fact that 0.0 is ;; all 0-bits would make “tstsf” a straight-forward implementation; ;; either “test.d” it for positive/negative or “btstq 30,r” it for ;; zeroness. ;; ;; FIXME: Do that some time; check next_cc0_user to determine if ;; zero or negative is tested for. ;; Compare insns.
;; We could optimize the sizes of the immediate operands for various ;; cases, but that is not worth it because of the very little usage of ;; DImode for anything else but a structure/block-mode. Just do the ;; obvious stuff for the straight-forward constraint letters.
(define_insn “cmpdi” [(set (cc0) (compare (match_operand:DI 0 “nonimmediate_operand” “r,r,r,r,r,r,o”) (match_operand:DI 1 “general_operand” “K,I,P,n,r,o,r”)))] "" “@ cmpq %1,%M0;ax;cmpq 0,%H0 cmpq %1,%M0;ax;cmpq -1,%H0 cmp%e1.%z1 %1,%M0;ax;cmpq %H1,%H0 cmp.d %M1,%M0;ax;cmp.d %H1,%H0 cmp.d %M1,%M0;ax;cmp.d %H1,%H0 cmp.d %M1,%M0;ax;cmp.d %H1,%H0 cmp.d %M0,%M1;ax;cmp.d %H0,%H1”)
;; Note that compare insns with side effect addressing mode (e.g.): ;; ;; cmp.S [rx=ry+i],rz; ;; cmp.S [%3=%1+%2],%0 ;; ;; are not usable for gcc since the reloader does not accept ;; cc0-changing insns with side-effects other than setting the condition ;; codes. The reason is that the reload stage may cause another insn to ;; be output after the main instruction, in turn invalidating cc0 for the ;; insn using the test. (This does not apply to the CRIS case, since a ;; reload for output -- move to memory -- does not change the condition ;; code. Unfortunately we have no way to describe that at the moment. I ;; think code would improve being in the order of one percent faster. ;; We have cmps and cmpu (compare reg w. sign/zero extended mem). ;; These are mostly useful for compares in SImode, using 8 or 16-bit ;; constants, but sometimes gcc will find its way to use it for other ;; (memory) operands. Avoid side-effect patterns, though (see above). ;; ;; FIXME: These could have an anonymous mode for operand 1.
;; QImode
(define_insn “*cmp_extsi” [(set (cc0) (compare (match_operand:SI 0 “register_operand” “r,r”) (match_operator:SI 2 “cris_extend_operator” [(match_operand:QI 1 “memory_operand” “Q>,m”)])))] "" “cmp%e2.%s1 %1,%0” [(set_attr “slottable” “yes,no”)])
;; HImode (define_insn “*cmp_exthi” [(set (cc0) (compare (match_operand:SI 0 “register_operand” “r,r”) (match_operator:SI 2 “cris_extend_operator” [(match_operand:HI 1 “memory_operand” “Q>,m”)])))] "" “cmp%e2.%s1 %1,%0” [(set_attr “slottable” “yes,no”)])
;; Swap operands; it seems the canonical look (if any) is not enforced. ;; ;; FIXME: Investigate that. ;; FIXME: These could have an anonymous mode for operand 1.
;; QImode
(define_insn “*cmp_swapextqi” [(set (cc0) (compare (match_operator:SI 2 “cris_extend_operator” [(match_operand:QI 0 “memory_operand” “Q>,m”)]) (match_operand:SI 1 “register_operand” “r,r”)))] "" “cmp%e2.%s0 %0,%1” ; The function cris_notice_update_cc knows about ; swapped operands to compares. [(set_attr “slottable” “yes,no”)])
;; HImode
(define_insn “*cmp_swapexthi” [(set (cc0) (compare (match_operator:SI 2 “cris_extend_operator” [(match_operand:HI 0 “memory_operand” “Q>,m”)]) (match_operand:SI 1 “register_operand” “r,r”)))] "" “cmp%e2.%s0 %0,%1” ; The function cris_notice_update_cc knows about ; swapped operands to compares. [(set_attr “slottable” “yes,no”)]) ;; The “normal” compare patterns, from SI on.
(define_insn “cmpsi” [(set (cc0) (compare (match_operand:SI 0 “nonimmediate_operand” “r,r,r,r,Q>,Q>,r,r,m,m”) (match_operand:SI 1 “general_operand” “I,r,Q>,M,M,r,P,g,M,r”)))] "" “@ cmpq %1,%0 cmp.d %1,%0 cmp.d %1,%0 test.d %0 test.d %0 cmp.d %0,%1 cmp%e1.%z1 %1,%0 cmp.d %1,%0 test.d %0 cmp.d %0,%1” [(set_attr “slottable” “yes,yes,yes,yes,yes,yes,no,no,no,no”)])
(define_insn “cmphi” [(set (cc0) (compare (match_operand:HI 0 “nonimmediate_operand” “r,r,Q>,Q>,r,m,m”) (match_operand:HI 1 “general_operand” “r,Q>,M,r,g,M,r”)))] "" “@ cmp.w %1,%0 cmp.w %1,%0 test.w %0 cmp.w %0,%1 cmp.w %1,%0 test.w %0 cmp.w %0,%1” [(set_attr “slottable” “yes,yes,yes,yes,no,no,no”)])
(define_insn “cmpqi” [(set (cc0) (compare (match_operand:QI 0 “nonimmediate_operand” “r,r,r,Q>,Q>,r,m,m”) (match_operand:QI 1 “general_operand” “r,Q>,M,M,r,g,M,r”)))] "" “@ cmp.b %1,%0 cmp.b %1,%0 test.b %0 test.b %0 cmp.b %0,%1 cmp.b %1,%0 test.b %0 cmp.b %0,%1” [(set_attr “slottable” “yes,yes,yes,yes,yes,no,no,no”)]) ;; Pattern matching the BTST insn. ;; It is useful for “if (i & val)” constructs, where val is an exact ;; power of 2, or if val + 1 is a power of two, where we check for a bunch ;; of zeros starting at bit 0).
;; SImode. This mode is the only one needed, since gcc automatically ;; extends subregs for lower-size modes. FIXME: Add testcase. (define_insn “*btst” [(set (cc0) (zero_extract (match_operand:SI 0 “nonmemory_operand” “r,r,r,r,r,r,n”) (match_operand:SI 1 “const_int_operand” “K,n,K,n,K,n,n”) (match_operand:SI 2 “nonmemory_operand” “M,M,K,n,r,r,r”)))] ;; Either it is a single bit, or consecutive ones starting at 0. “GET_CODE (operands[1]) == CONST_INT && (operands[1] == const1_rtx || operands[2] == const0_rtx) && (REG_S_P (operands[0]) || (operands[1] == const1_rtx && REG_S_P (operands[2]) && GET_CODE (operands[0]) == CONST_INT && exact_log2 (INTVAL (operands[0])) >= 0))”
;; The last “&&” condition above should be caught by some kind of ;; canonicalization in gcc, but we can easily help with it here. ;; It results from expressions of the type ;; “power_of_2_value & (1 << y)”. ;; ;; Since there may be codes with tests in on bits (in constant position) ;; beyond the size of a word, handle that by assuming those bits are 0. ;; GCC should handle that, but it's a matter of easily-added belts while ;; having suspenders.
“@ btstq (%1-1),%0 test.d %0 btstq %2,%0 clearf nz btst %2,%0 clearf nz cmpq %p0,%2” [(set_attr “slottable” “yes”)]) ;; Move insns.
;; The whole mandatory movdi family is here; expander, “anonymous” ;; recognizer and splitter. We‘re forced to have a movdi pattern, ;; although GCC should be able to split it up itself. Normally it can, ;; but if other insns have DI operands (as is the case here), reload ;; must be able to generate or match a movdi. many testcases fail at ;; -O3 or -fssa if we don’t have this. FIXME: Fix GCC... See ;; URL:http://gcc.gnu.org/ml/gcc-patches/2000-04/msg00104.html. ;; However, a patch from Richard Kenner (similar to the cause of ;; discussion at the URL above), indicates otherwise. See ;; URL:http://gcc.gnu.org/ml/gcc-patches/2000-04/msg00554.html. ;; The truth has IMO is not been decided yet, so check from time to ;; time by disabling the movdi patterns.
(define_expand “movdi” [(set (match_operand:DI 0 “nonimmediate_operand” "") (match_operand:DI 1 “general_operand” ""))] "" " { if (GET_CODE (operands[0]) == MEM && operands[1] != const0_rtx) operands[1] = copy_to_mode_reg (DImode, operands[1]);
/* Some other ports (as of 2001-09-10 for example mcore and romp) also prefer to split up constants early, like this. The testcase in gcc.c-torture/execute/961213-1.c shows that CSE2 gets confused by the resulting subreg sets when using the construct from mcore (as of FSF CVS, version -r 1.5), and it believes that the high part (the last one emitted) is the final value. This construct from romp seems more robust, especially considering the head comments from emit_no_conflict_block. */ if ((GET_CODE (operands[1]) == CONST_INT || GET_CODE (operands[1]) == CONST_DOUBLE) && ! reload_completed && ! reload_in_progress) { rtx insns; rtx op0 = operands[0]; rtx op1 = operands[1];
start_sequence (); emit_move_insn (operand_subword (op0, 0, 1, DImode), operand_subword (op1, 0, 1, DImode)); emit_move_insn (operand_subword (op0, 1, 1, DImode), operand_subword (op1, 1, 1, DImode)); insns = get_insns (); end_sequence (); emit_no_conflict_block (insns, op0, op1, 0, op1); DONE; }
}")
(define_insn “*movdi_insn” [(set (match_operand:DI 0 “nonimmediate_operand” “=r,r,m”) (match_operand:DI 1 “general_operand” “r,g,rM”))] “register_operand (operands[0], DImode) || register_operand (operands[1], DImode) || operands[1] == const0_rtx” “#”)
(define_split [(set (match_operand:DI 0 “nonimmediate_operand” "") (match_operand:DI 1 “general_operand” ""))] “reload_completed” [(match_dup 2)] “operands[2] = cris_split_movdx (operands);”) ;; Side-effect patterns for move.S1 [rx=ry+rx.S2],rw ;; and move.S1 [rx=ry+i],rz ;; Then movs.S1 and movu.S1 for both modes. ;; ;; move.S1 [rx=ry+rz.S],rw avoiding when rx is ry, or rw is rx ;; FIXME: These could have anonymous mode for operand 0.
;; QImode
(define_insn “*mov_sideqi_biap” [(set (match_operand:QI 0 “register_operand” “=r,r”) (mem:QI (plus:SI (mult:SI (match_operand:SI 1 “register_operand” “r,r”) (match_operand:SI 2 “const_int_operand” “n,n”)) (match_operand:SI 3 “register_operand” “r,r”)))) (set (match_operand:SI 4 “register_operand” “=*3,r”) (plus:SI (mult:SI (match_dup 1) (match_dup 2)) (match_dup 3)))] “cris_side_effect_mode_ok (MULT, operands, 4, 3, 1, 2, 0)” "@
move.%s0 [%4=%3+%1%T2],%0")
;; HImode
(define_insn “*mov_sidehi_biap” [(set (match_operand:HI 0 “register_operand” “=r,r”) (mem:HI (plus:SI (mult:SI (match_operand:SI 1 “register_operand” “r,r”) (match_operand:SI 2 “const_int_operand” “n,n”)) (match_operand:SI 3 “register_operand” “r,r”)))) (set (match_operand:SI 4 “register_operand” “=*3,r”) (plus:SI (mult:SI (match_dup 1) (match_dup 2)) (match_dup 3)))] “cris_side_effect_mode_ok (MULT, operands, 4, 3, 1, 2, 0)” "@
move.%s0 [%4=%3+%1%T2],%0")
;; SImode
(define_insn “*mov_sidesi_biap” [(set (match_operand:SI 0 “register_operand” “=r,r”) (mem:SI (plus:SI (mult:SI (match_operand:SI 1 “register_operand” “r,r”) (match_operand:SI 2 “const_int_operand” “n,n”)) (match_operand:SI 3 “register_operand” “r,r”)))) (set (match_operand:SI 4 “register_operand” “=*3,r”) (plus:SI (mult:SI (match_dup 1) (match_dup 2)) (match_dup 3)))] “cris_side_effect_mode_ok (MULT, operands, 4, 3, 1, 2, 0)” "@
move.%s0 [%4=%3+%1%T2],%0") ;; move.S1 [rx=ry+i],rz ;; avoiding move.S1 [ry=ry+i],rz ;; and move.S1 [rz=ry+i],rz ;; Note that “i” is allowed to be a register. ;; FIXME: These could have anonymous mode for operand 0.
;; QImode
(define_insn “*mov_sideqi” [(set (match_operand:QI 0 “register_operand” “=r,r,r”) (mem:QI (plus:SI (match_operand:SI 1 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 2 “cris_bdap_operand” “r>Rn,r,>Rn”)))) (set (match_operand:SI 3 “register_operand” “=*1,r,r”) (plus:SI (match_dup 1) (match_dup 2)))] “cris_side_effect_mode_ok (PLUS, operands, 3, 1, 2, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[2]) != CONST_INT || INTVAL (operands[2]) > 127 || INTVAL (operands[2]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘J’))) return "#"; return "move.%s0 [%3=%1%S2],%0"; }”)
;; HImode
(define_insn “*mov_sidehi” [(set (match_operand:HI 0 “register_operand” “=r,r,r”) (mem:HI (plus:SI (match_operand:SI 1 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 2 “cris_bdap_operand” “r>Rn,r,>Rn”)))) (set (match_operand:SI 3 “register_operand” “=*1,r,r”) (plus:SI (match_dup 1) (match_dup 2)))] “cris_side_effect_mode_ok (PLUS, operands, 3, 1, 2, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[2]) != CONST_INT || INTVAL (operands[2]) > 127 || INTVAL (operands[2]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘J’))) return "#"; return "move.%s0 [%3=%1%S2],%0"; }”)
;; SImode
(define_insn “*mov_sidesi” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (mem:SI (plus:SI (match_operand:SI 1 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 2 “cris_bdap_operand” “r>Rn,r,>Rn”)))) (set (match_operand:SI 3 “register_operand” “=*1,r,r”) (plus:SI (match_dup 1) (match_dup 2)))] “cris_side_effect_mode_ok (PLUS, operands, 3, 1, 2, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[2]) != CONST_INT || INTVAL (operands[2]) > 127 || INTVAL (operands[2]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘J’))) return "#"; return "move.%s0 [%3=%1%S2],%0"; }”) ;; Other way around; move to memory.
;; Note that the condition (which for side-effect patterns is usually a ;; call to cris_side_effect_mode_ok), isn‘t consulted for register ;; allocation preferences -- constraints is the method for that. The ;; drawback is that we can’t exclude register allocation to cause ;; “move.s rw,[rx=ry+rz.S]” when rw==rx without also excluding rx==ry or ;; rx==rz if we use an earlyclobber modifier for the constraint for rx. ;; Instead of that, we recognize and split the cases where dangerous ;; register combinations are spotted: where a register is set in the ;; side-effect, and used in the main insn. We don't handle the case where ;; the set in the main insn overlaps the set in the side-effect; that case ;; must be handled in gcc. We handle just the case where the set in the ;; side-effect overlaps the input operand of the main insn (i.e. just ;; moves to memory).
;; ;; move.s rz,[ry=rx+rw.S] ;; FIXME: These could have anonymous mode for operand 3.
;; QImode
(define_insn “*mov_sideqi_biap_mem” [(set (mem:QI (plus:SI (mult:SI (match_operand:SI 0 “register_operand” “r,r,r”) (match_operand:SI 1 “const_int_operand” “n,n,n”)) (match_operand:SI 2 “register_operand” “r,r,r”))) (match_operand:QI 3 “register_operand” “r,r,r”)) (set (match_operand:SI 4 “register_operand” “=*2,!3,r”) (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2)))] “cris_side_effect_mode_ok (MULT, operands, 4, 2, 0, 1, 3)” "@
move.%s3 %3,[%4=%2+%0%T1]")
;; HImode
(define_insn “*mov_sidehi_biap_mem” [(set (mem:HI (plus:SI (mult:SI (match_operand:SI 0 “register_operand” “r,r,r”) (match_operand:SI 1 “const_int_operand” “n,n,n”)) (match_operand:SI 2 “register_operand” “r,r,r”))) (match_operand:HI 3 “register_operand” “r,r,r”)) (set (match_operand:SI 4 “register_operand” “=*2,!3,r”) (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2)))] “cris_side_effect_mode_ok (MULT, operands, 4, 2, 0, 1, 3)” "@
move.%s3 %3,[%4=%2+%0%T1]")
;; SImode
(define_insn “*mov_sidesi_biap_mem” [(set (mem:SI (plus:SI (mult:SI (match_operand:SI 0 “register_operand” “r,r,r”) (match_operand:SI 1 “const_int_operand” “n,n,n”)) (match_operand:SI 2 “register_operand” “r,r,r”))) (match_operand:SI 3 “register_operand” “r,r,r”)) (set (match_operand:SI 4 “register_operand” “=*2,!3,r”) (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2)))] “cris_side_effect_mode_ok (MULT, operands, 4, 2, 0, 1, 3)” "@
move.%s3 %3,[%4=%2+%0%T1]")
;; Split for the case above where we‘re out of luck with register ;; allocation (again, the condition isn’t checked for that), and we end up ;; with the set in the side-effect getting the same register as the input ;; register.
(define_split [(parallel [(set (match_operator 6 “cris_mem_op” [(plus:SI (mult:SI (match_operand:SI 0 “register_operand” "") (match_operand:SI 1 “const_int_operand” "")) (match_operand:SI 2 “register_operand” ""))]) (match_operand 3 “register_operand” "")) (set (match_operand:SI 4 “register_operand” "") (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2)))])] “reload_completed && reg_overlap_mentioned_p (operands[4], operands[3])” [(set (match_dup 5) (match_dup 3)) (set (match_dup 4) (match_dup 2)) (set (match_dup 4) (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 4)))] “operands[5] = replace_equiv_address (operands[6], gen_rtx_PLUS (SImode, gen_rtx_MULT (SImode, operands[0], operands[1]), operands[2]));”) ;; move.s rx,[ry=rz+i] ;; FIXME: These could have anonymous mode for operand 2.
;; QImode
(define_insn “*mov_sideqi_mem” [(set (mem:QI (plus:SI (match_operand:SI 0 “cris_bdap_operand” “%r,r,r,r”) (match_operand:SI 1 “cris_bdap_operand” “r>Rn,r>Rn,r,>Rn”))) (match_operand:QI 2 “register_operand” “r,r,r,r”)) (set (match_operand:SI 3 “register_operand” “=*0,!2,r,r”) (plus:SI (match_dup 0) (match_dup 1)))] “cris_side_effect_mode_ok (PLUS, operands, 3, 0, 1, -1, 2)” “* { if (which_alternative == 0 && (GET_CODE (operands[1]) != CONST_INT || INTVAL (operands[1]) > 127 || INTVAL (operands[1]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), ‘J’))) return "#"; if (which_alternative == 1) return "#"; return "move.%s2 %2,[%3=%0%S1]"; }”)
;; HImode
(define_insn “*mov_sidehi_mem” [(set (mem:HI (plus:SI (match_operand:SI 0 “cris_bdap_operand” “%r,r,r,r”) (match_operand:SI 1 “cris_bdap_operand” “r>Rn,r>Rn,r,>Rn”))) (match_operand:HI 2 “register_operand” “r,r,r,r”)) (set (match_operand:SI 3 “register_operand” “=*0,!2,r,r”) (plus:SI (match_dup 0) (match_dup 1)))] “cris_side_effect_mode_ok (PLUS, operands, 3, 0, 1, -1, 2)” “* { if (which_alternative == 0 && (GET_CODE (operands[1]) != CONST_INT || INTVAL (operands[1]) > 127 || INTVAL (operands[1]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), ‘J’))) return "#"; if (which_alternative == 1) return "#"; return "move.%s2 %2,[%3=%0%S1]"; }”)
;; SImode
(define_insn “*mov_sidesi_mem” [(set (mem:SI (plus:SI (match_operand:SI 0 “cris_bdap_operand” “%r,r,r,r”) (match_operand:SI 1 “cris_bdap_operand” “r>Rn,r>Rn,r,>Rn”))) (match_operand:SI 2 “register_operand” “r,r,r,r”)) (set (match_operand:SI 3 “register_operand” “=*0,!2,r,r”) (plus:SI (match_dup 0) (match_dup 1)))] “cris_side_effect_mode_ok (PLUS, operands, 3, 0, 1, -1, 2)” “* { if (which_alternative == 0 && (GET_CODE (operands[1]) != CONST_INT || INTVAL (operands[1]) > 127 || INTVAL (operands[1]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), ‘J’))) return "#"; if (which_alternative == 1) return "#"; return "move.%s2 %2,[%3=%0%S1]"; }”)
;; Like the biap case, a split where the set in the side-effect gets the ;; same register as the input register to the main insn, since the ;; condition isn't checked at register allocation.
(define_split [(parallel [(set (match_operator 4 “cris_mem_op” [(plus:SI (match_operand:SI 0 “cris_bdap_operand” "") (match_operand:SI 1 “cris_bdap_operand” ""))]) (match_operand 2 “register_operand” "")) (set (match_operand:SI 3 “register_operand” "") (plus:SI (match_dup 0) (match_dup 1)))])] “reload_completed && reg_overlap_mentioned_p (operands[3], operands[2])” [(set (match_dup 4) (match_dup 2)) (set (match_dup 3) (match_dup 0)) (set (match_dup 3) (plus:SI (match_dup 3) (match_dup 1)))] "") ;; Clear memory side-effect patterns. It is hard to get to the mode if ;; the MEM was anonymous, so there will be one for each mode.
;; clear.d [ry=rx+rw.s2]
(define_insn “*clear_sidesi_biap” [(set (mem:SI (plus:SI (mult:SI (match_operand:SI 0 “register_operand” “r,r”) (match_operand:SI 1 “const_int_operand” “n,n”)) (match_operand:SI 2 “register_operand” “r,r”))) (const_int 0)) (set (match_operand:SI 3 “register_operand” “=*2,r”) (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2)))] “cris_side_effect_mode_ok (MULT, operands, 3, 2, 0, 1, -1)” "@
clear.d [%3=%2+%0%T1]")
;; clear.d [ry=rz+i]
(define_insn “*clear_sidesi” [(set (mem:SI (plus:SI (match_operand:SI 0 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 1 “cris_bdap_operand” “r>Rn,r,>Rn”))) (const_int 0)) (set (match_operand:SI 2 “register_operand” “=*0,r,r”) (plus:SI (match_dup 0) (match_dup 1)))] “cris_side_effect_mode_ok (PLUS, operands, 2, 0, 1, -1, -1)” “* { if (which_alternative == 0 && (GET_CODE (operands[1]) != CONST_INT || INTVAL (operands[1]) > 127 || INTVAL (operands[1]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), ‘J’))) return "#"; return "clear.d [%2=%0%S1]"; }”)
;; clear.w [ry=rx+rw.s2]
(define_insn “*clear_sidehi_biap” [(set (mem:HI (plus:SI (mult:SI (match_operand:SI 0 “register_operand” “r,r”) (match_operand:SI 1 “const_int_operand” “n,n”)) (match_operand:SI 2 “register_operand” “r,r”))) (const_int 0)) (set (match_operand:SI 3 “register_operand” “=*2,r”) (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2)))] “cris_side_effect_mode_ok (MULT, operands, 3, 2, 0, 1, -1)” "@
clear.w [%3=%2+%0%T1]")
;; clear.w [ry=rz+i]
(define_insn “*clear_sidehi” [(set (mem:HI (plus:SI (match_operand:SI 0 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 1 “cris_bdap_operand” “r>Rn,r,>Rn”))) (const_int 0)) (set (match_operand:SI 2 “register_operand” “=*0,r,r”) (plus:SI (match_dup 0) (match_dup 1)))] “cris_side_effect_mode_ok (PLUS, operands, 2, 0, 1, -1, -1)” “* { if (which_alternative == 0 && (GET_CODE (operands[1]) != CONST_INT || INTVAL (operands[1]) > 127 || INTVAL (operands[1]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), ‘J’))) return "#"; return "clear.w [%2=%0%S1]"; }”)
;; clear.b [ry=rx+rw.s2]
(define_insn “*clear_sideqi_biap” [(set (mem:QI (plus:SI (mult:SI (match_operand:SI 0 “register_operand” “r,r”) (match_operand:SI 1 “const_int_operand” “n,n”)) (match_operand:SI 2 “register_operand” “r,r”))) (const_int 0)) (set (match_operand:SI 3 “register_operand” “=*2,r”) (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2)))] “cris_side_effect_mode_ok (MULT, operands, 3, 2, 0, 1, -1)” "@
clear.b [%3=%2+%0%T1]")
;; clear.b [ry=rz+i]
(define_insn “*clear_sideqi” [(set (mem:QI (plus:SI (match_operand:SI 0 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 1 “cris_bdap_operand” “r>Rn,r,>Rn”))) (const_int 0)) (set (match_operand:SI 2 “register_operand” “=*0,r,r”) (plus:SI (match_dup 0) (match_dup 1)))] “cris_side_effect_mode_ok (PLUS, operands, 2, 0, 1, -1, -1)” “* { if (which_alternative == 0 && (GET_CODE (operands[1]) != CONST_INT || INTVAL (operands[1]) > 127 || INTVAL (operands[1]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[1]), ‘J’))) return "#"; return "clear.b [%2=%0%S1]"; }”) ;; To appease testcase gcc.c-torture/execute/920501-2.c (and others) at ;; -O0, we need a movdi as a temporary measure. Here's how things fail: ;; A cmpdi RTX needs reloading (global): ;; (insn 185 326 186 (set (cc0) ;; (compare (mem/f:DI (reg/v:SI 22) 0) ;; (const_int 1 [0x1]))) 4 {cmpdi} (nil) ;; (nil)) ;; Now, reg 22 is reloaded for input address, and the mem is also moved ;; out of the instruction (into a register), since one of the operands ;; must be a register. Reg 22 is reloaded (into reg 10), and the mem is ;; moved out and synthesized in SImode parts (reg 9, reg 10 - should be ok ;; wrt. overlap). The bad things happen with the synthesis in ;; emit_move_insn_1; the location where to substitute reg 10 is lost into ;; two new RTX:es, both still having reg 22. Later on, the left-over reg ;; 22 is recognized to have an equivalent in memory which is substituted ;; straight in, and we end up with an unrecognizable insn: ;; (insn 325 324 326 (set (reg:SI 9 r9) ;; (mem/f:SI (mem:SI (plus:SI (reg:SI 8 r8) ;; (const_int -84 [0xffffffac])) 0) 0)) -1 (nil) ;; (nil)) ;; which is the first part of the reloaded synthesized “movdi”. ;; The right thing would be to add equivalent replacement locations for ;; insn with pseudos that need more reloading. The question is where.
;; Normal move patterns from SI on.
(define_expand “movsi” [(set (match_operand:SI 0 “nonimmediate_operand” "") (match_operand:SI 1 “cris_general_operand_or_symbol” ""))] "" " { /* If the output goes to a MEM, make sure we have zero or a register as input. */ if (GET_CODE (operands[0]) == MEM && ! REG_S_P (operands[1]) && operands[1] != const0_rtx && ! no_new_pseudos) operands[1] = force_reg (SImode, operands[1]);
/* If we're generating PIC and have an incoming symbol, validize it to a general operand or something that will match a special pattern.
FIXME: Do we *have* to recognize anything that would normally be a valid symbol? Can we exclude global PIC addresses with an added offset? */
if (flag_pic && CONSTANT_ADDRESS_P (operands[1]) && cris_symbol (operands[1])) { /* We must have a register as destination for what we‘re about to do, and for the patterns we generate. / if (! REG_S_P (operands[0])) { if (no_new_pseudos) abort (); operands[1] = force_reg (SImode, operands[1]); } else { / Mark a needed PIC setup for a LABEL_REF:s coming in here: they are so rare not-being-branch-targets that we don’t mark a function as needing PIC setup just because we have inspected LABEL_REF:s as operands. It is only in __builtin_setjmp and such that we can get a LABEL_REF assigned to a register. */ if (GET_CODE (operands[1]) == LABEL_REF) current_function_uses_pic_offset_table = 1;
/* We don't have to do anything for global PIC operands; they look just like ``[rPIC+sym]''. */ if (! cris_got_symbol (operands[1]) /* We don't do anything for local PIC operands; we match that with a special alternative. */ && ! cris_gotless_symbol (operands[1])) { /* We get here when we have to change something that would be recognizable if it wasn't PIC. A ``sym'' is ok for PIC symbols both with and without a GOT entry. And ``sym + offset'' is ok for local symbols, so the only thing it could be, is a global symbol with an offset. Check and abort if not. */ rtx sym = get_related_value (operands[1]); HOST_WIDE_INT offs = get_integer_term (operands[1]); if (sym == NULL_RTX || offs == 0) abort (); emit_move_insn (operands[0], sym); if (expand_binop (SImode, add_optab, operands[0], GEN_INT (offs), operands[0], 0, OPTAB_LIB_WIDEN) != operands[0]) abort (); DONE; } } }
}")
(define_insn “*movsi_internal” [(set (match_operand:SI 0 “nonimmediate_operand” “=r,r,r,Q>,r,Q>,g,r,r,r,g”) (match_operand:SI 1 ;; FIXME: We want to put S last, but apparently g matches S. ;; It‘s a bug: an S is not a general_operand and shouldn’t match g. “cris_general_operand_or_gotless_symbol” “r,Q>,M,M,I,r,M,n,!S,g,r”))] "" "* { /* Better to have c-switch here; it is worth it to optimize the size of move insns. The alternative would be to try to find more constraint letters. FIXME: Check again. It seems this could shrink a bit. */ switch (which_alternative) { case 0: case 1: case 5: case 9: case 10: return "move.d %1,%0";
case 2: case 3: case 6: return \"clear.d %0\"; /* Constants -32..31 except 0. */ case 4: return \"moveq %1,%0\"; /* We can win a little on constants -32768..-33, 32..65535. */ case 7: if (INTVAL (operands[1]) > 0 && INTVAL (operands[1]) < 65536) { if (INTVAL (operands[1]) < 256) return \"movu.b %1,%0\"; return \"movu.w %1,%0\"; } else if (INTVAL (operands[1]) >= -32768 && INTVAL (operands[1]) < 32768) { if (INTVAL (operands[1]) >= -128 && INTVAL (operands[1]) < 128) return \"movs.b %1,%0\"; return \"movs.w %1,%0\"; } return \"move.d %1,%0\"; case 8: /* FIXME: Try and split this into pieces GCC makes better code of, than this multi-insn pattern. Synopsis: wrap the GOT-relative symbol into an unspec, and when PIC, recognize the unspec everywhere a symbol is normally recognized. (The PIC register should be recognized by GCC as pic_offset_table_rtx when needed and similar for PC.) Each component can then be optimized with the rest of the code; it should be possible to have a constant term added on an unspec. Don't forget to add a REG_EQUAL (or is it REG_EQUIV) note to the destination. It might not be worth it. Measure. Note that the 'v' modifier makes PLT references be output as sym:PLT rather than [rPIC+sym:GOTPLT]. */ return \"move.d %v1,%0\;add.d %P1,%0\"; default: return \"BOGUS: %1 to %0\"; }
}" [(set_attr “slottable” “yes,yes,yes,yes,yes,yes,no,no,no,no,no”)]) ;; Extend operations with side-effect from mem to register, using ;; MOVS/MOVU. These are from mem to register only. ;; ;; [rx=ry+rz.S] ;; ;; QImode to HImode ;; ;; FIXME: Can we omit extend to HImode, since GCC should truncate for ;; HImode by itself? Perhaps use only anonymous modes?
(define_insn “*ext_sideqihi_biap” [(set (match_operand:HI 0 “register_operand” “=r,r”) (match_operator:HI 5 “cris_extend_operator” [(mem:QI (plus:SI (mult:SI (match_operand:SI 1 “register_operand” “r,r”) (match_operand:SI 2 “const_int_operand” “n,n”)) (match_operand:SI 3 “register_operand” “r,r”)))])) (set (match_operand:SI 4 “register_operand” “=*3,r”) (plus:SI (mult:SI (match_dup 1) (match_dup 2)) (match_dup 3)))] “cris_side_effect_mode_ok (MULT, operands, 4, 3, 1, 2, 0)” "@
mov%e5.%m5 [%4=%3+%1%T2],%0")
;; QImode to SImode
(define_insn “*ext_sideqisi_biap” [(set (match_operand:SI 0 “register_operand” “=r,r”) (match_operator:SI 5 “cris_extend_operator” [(mem:QI (plus:SI (mult:SI (match_operand:SI 1 “register_operand” “r,r”) (match_operand:SI 2 “const_int_operand” “n,n”)) (match_operand:SI 3 “register_operand” “r,r”)))])) (set (match_operand:SI 4 “register_operand” “=*3,r”) (plus:SI (mult:SI (match_dup 1) (match_dup 2)) (match_dup 3)))] “cris_side_effect_mode_ok (MULT, operands, 4, 3, 1, 2, 0)” "@
mov%e5.%m5 [%4=%3+%1%T2],%0")
;; HImode to SImode
(define_insn “*ext_sidehisi_biap” [(set (match_operand:SI 0 “register_operand” “=r,r”) (match_operator:SI 5 “cris_extend_operator” [(mem:HI (plus:SI (mult:SI (match_operand:SI 1 “register_operand” “r,r”) (match_operand:SI 2 “const_int_operand” “n,n”)) (match_operand:SI 3 “register_operand” “r,r”)))])) (set (match_operand:SI 4 “register_operand” “=*3,r”) (plus:SI (mult:SI (match_dup 1) (match_dup 2)) (match_dup 3)))] “cris_side_effect_mode_ok (MULT, operands, 4, 3, 1, 2, 0)” "@
mov%e5.%m5 [%4=%3+%1%T2],%0") ;; Same but [rx=ry+i]
;; QImode to HImode
(define_insn “*ext_sideqihi” [(set (match_operand:HI 0 “register_operand” “=r,r,r”) (match_operator:HI 4 “cris_extend_operator” [(mem:QI (plus:SI (match_operand:SI 1 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 2 “cris_bdap_operand” “r>Rn,r,>Rn”)))])) (set (match_operand:SI 3 “register_operand” “=*1,r,r”) (plus:SI (match_dup 1) (match_dup 2)))] “cris_side_effect_mode_ok (PLUS, operands, 3, 1, 2, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[2]) != CONST_INT || INTVAL (operands[2]) > 127 || INTVAL (operands[2]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘J’))) return "#"; return "mov%e4.%m4 [%3=%1%S2],%0"; }”)
;; QImode to SImode
(define_insn “*ext_sideqisi” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (match_operator:SI 4 “cris_extend_operator” [(mem:QI (plus:SI (match_operand:SI 1 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 2 “cris_bdap_operand” “r>Rn,r,>Rn”)))])) (set (match_operand:SI 3 “register_operand” “=*1,r,r”) (plus:SI (match_dup 1) (match_dup 2)))] “cris_side_effect_mode_ok (PLUS, operands, 3, 1, 2, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[2]) != CONST_INT || INTVAL (operands[2]) > 127 || INTVAL (operands[2]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘J’))) return "#"; return "mov%e4.%m4 [%3=%1%S2],%0"; }”)
;; HImode to SImode
(define_insn “*ext_sidehisi” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (match_operator:SI 4 “cris_extend_operator” [(mem:HI (plus:SI (match_operand:SI 1 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 2 “cris_bdap_operand” “r>Rn,r,>Rn”)))])) (set (match_operand:SI 3 “register_operand” “=*1,r,r”) (plus:SI (match_dup 1) (match_dup 2)))] “cris_side_effect_mode_ok (PLUS, operands, 3, 1, 2, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[2]) != CONST_INT || INTVAL (operands[2]) > 127 || INTVAL (operands[2]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘J’))) return "#"; return "mov%e4.%m4 [%3=%1%S2],%0"; }”) ;; FIXME: See movsi.
(define_insn “movhi” [(set (match_operand:HI 0 “nonimmediate_operand” “=r,r,r,Q>,r,Q>,r,r,r,g,g,r”) (match_operand:HI 1 “general_operand” “r,Q>,M,M,I,r,L,O,n,M,r,g”))] "" “* { switch (which_alternative) { case 0: case 1: case 5: case 10: case 11: return "move.w %1,%0"; case 2: case 3: case 9: return "clear.w %0"; case 4: return "moveq %1,%0"; case 6: case 8: if (INTVAL (operands[1]) < 256 && INTVAL (operands[1]) >= -128) { if (INTVAL (operands[1]) > 0) return "movu.b %1,%0"; return "movs.b %1,%0"; } return "move.w %1,%0"; case 7: return "movEq %b1,%0"; default: return "BOGUS: %1 to %0"; } }” [(set_attr “slottable” “yes,yes,yes,yes,yes,yes,no,yes,no,no,no,no”) (set (attr “cc”) (if_then_else (eq_attr “alternative” “7”) (const_string “clobber”) (const_string “normal”)))])
(define_insn “movstricthi” [(set (strict_low_part (match_operand:HI 0 “nonimmediate_operand” “+r,r,r,Q>,Q>,g,r,g”)) (match_operand:HI 1 “general_operand” “r,Q>,M,M,r,M,g,r”))] "" “@ move.w %1,%0 move.w %1,%0 clear.w %0 clear.w %0 move.w %1,%0 clear.w %0 move.w %1,%0 move.w %1,%0” [(set_attr “slottable” “yes,yes,yes,yes,yes,no,no,no”)]) (define_insn “movqi” [(set (match_operand:QI 0 “nonimmediate_operand” “=r,Q>,r,r,Q>,r,g,g,r,r”) (match_operand:QI 1 “general_operand” “r,r,Q>,M,M,I,M,r,O,g”))] "" “@ move.b %1,%0 move.b %1,%0 move.b %1,%0 clear.b %0 clear.b %0 moveq %1,%0 clear.b %0 move.b %1,%0 moveq %b1,%0 move.b %1,%0” [(set_attr “slottable” “yes,yes,yes,yes,yes,yes,no,no,yes,no”) (set (attr “cc”) (if_then_else (eq_attr “alternative” “8”) (const_string “clobber”) (const_string “normal”)))])
(define_insn “movstrictqi” [(set (strict_low_part (match_operand:QI 0 “nonimmediate_operand” “+r,Q>,r,r,Q>,g,g,r”)) (match_operand:QI 1 “general_operand” “r,r,Q>,M,M,M,r,g”))] "" “@ move.b %1,%0 move.b %1,%0 move.b %1,%0 clear.b %0 clear.b %0 clear.b %0 move.b %1,%0 move.b %1,%0” [(set_attr “slottable” “yes,yes,yes,yes,yes,no,no,no”)])
;; The valid “quick” bit-patterns are, except for 0.0, denormalized ;; values REALLY close to 0, and some NaN:s (I think; their exponent is ;; all ones); the worthwhile one is “0.0”. ;; It will use clear, so we know ALL types of immediate 0 never change cc.
(define_insn “movsf” [(set (match_operand:SF 0 “nonimmediate_operand” “=r,Q>,r,r,Q>,g,g,r”) (match_operand:SF 1 “general_operand” “r,r,Q>,G,G,G,r,g”))] "" “@ move.d %1,%0 move.d %1,%0 move.d %1,%0 clear.d %0 clear.d %0 clear.d %0 move.d %1,%0 move.d %1,%0” [(set_attr “slottable” “yes,yes,yes,yes,yes,no,no,no”)])
;; Sign- and zero-extend insns with standard names. ;; Those for integer source operand are ordered with the widest source ;; type first.
;; Sign-extend.
(define_insn “extendsidi2” [(set (match_operand:DI 0 “register_operand” “=r”) (sign_extend:DI (match_operand:SI 1 “general_operand” “g”)))] "" “move.d %1,%M0;smi %H0;neg.d %H0,%H0”)
(define_insn “extendhidi2” [(set (match_operand:DI 0 “register_operand” “=r”) (sign_extend:DI (match_operand:HI 1 “general_operand” “g”)))] "" “movs.w %1,%M0;smi %H0;neg.d %H0,%H0”)
(define_insn “extendhisi2” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (sign_extend:SI (match_operand:HI 1 “general_operand” “r,Q>,g”)))] "" “movs.w %1,%0” [(set_attr “slottable” “yes,yes,no”)])
(define_insn “extendqidi2” [(set (match_operand:DI 0 “register_operand” “=r”) (sign_extend:DI (match_operand:QI 1 “general_operand” “g”)))] "" “movs.b %1,%M0;smi %H0;neg.d %H0,%H0”)
(define_insn “extendqisi2” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (sign_extend:SI (match_operand:QI 1 “general_operand” “r,Q>,g”)))] "" “movs.b %1,%0” [(set_attr “slottable” “yes,yes,no”)])
;; To do a byte->word extension, extend to dword, exept that the top half ;; of the register will be clobbered. FIXME: Perhaps this is not needed.
(define_insn “extendqihi2” [(set (match_operand:HI 0 “register_operand” “=r,r,r”) (sign_extend:HI (match_operand:QI 1 “general_operand” “r,Q>,g”)))] "" “movs.b %1,%0” [(set_attr “slottable” “yes,yes,no”)])
;; Zero-extend. The DImode ones are synthesized by gcc, so we don't ;; specify them here.
(define_insn “zero_extendhisi2” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (zero_extend:SI (match_operand:HI 1 “nonimmediate_operand” “r,Q>,m”)))] "" “movu.w %1,%0” [(set_attr “slottable” “yes,yes,no”)])
(define_insn “zero_extendqisi2” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (zero_extend:SI (match_operand:QI 1 “nonimmediate_operand” “r,Q>,m”)))] "" “movu.b %1,%0” [(set_attr “slottable” “yes,yes,no”)])
;; Same comment as sign-extend QImode to HImode above applies.
(define_insn “zero_extendqihi2” [(set (match_operand:HI 0 “register_operand” “=r,r,r”) (zero_extend:HI (match_operand:QI 1 “nonimmediate_operand” “r,Q>,m”)))] "" “movu.b %1,%0” [(set_attr “slottable” “yes,yes,no”)]) ;; All kinds of arithmetic and logical instructions. ;; ;; First, anonymous patterns to match addressing modes with ;; side-effects. ;; ;; op.S [rx=ry+I],rz; (add, sub, or, and, bound). ;; ;; [rx=ry+rz.S] ;; FIXME: These could have anonymous mode for operand 0.
;; QImode
(define_insn “*op_sideqi_biap” [(set (match_operand:QI 0 “register_operand” “=r,r”) (match_operator:QI 6 “cris_orthogonal_operator” [(match_operand:QI 1 “register_operand” “0,0”) (mem:QI (plus:SI (mult:SI (match_operand:SI 2 “register_operand” “r,r”) (match_operand:SI 3 “const_int_operand” “n,n”)) (match_operand:SI 4 “register_operand” “r,r”)))])) (set (match_operand:SI 5 “register_operand” “=*4,r”) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))] “cris_side_effect_mode_ok (MULT, operands, 5, 4, 2, 3, 0)” "@
%x6.%s0 [%5=%4+%2%T3],%0")
;; HImode
(define_insn “*op_sidehi_biap” [(set (match_operand:HI 0 “register_operand” “=r,r”) (match_operator:HI 6 “cris_orthogonal_operator” [(match_operand:HI 1 “register_operand” “0,0”) (mem:HI (plus:SI (mult:SI (match_operand:SI 2 “register_operand” “r,r”) (match_operand:SI 3 “const_int_operand” “n,n”)) (match_operand:SI 4 “register_operand” “r,r”)))])) (set (match_operand:SI 5 “register_operand” “=*4,r”) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))] “cris_side_effect_mode_ok (MULT, operands, 5, 4, 2, 3, 0)” "@
%x6.%s0 [%5=%4+%2%T3],%0")
;; SImode
(define_insn “*op_sidesi_biap” [(set (match_operand:SI 0 “register_operand” “=r,r”) (match_operator:SI 6 “cris_orthogonal_operator” [(match_operand:SI 1 “register_operand” “0,0”) (mem:SI (plus:SI (mult:SI (match_operand:SI 2 “register_operand” “r,r”) (match_operand:SI 3 “const_int_operand” “n,n”)) (match_operand:SI 4 “register_operand” “r,r”)))])) (set (match_operand:SI 5 “register_operand” “=*4,r”) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))] “cris_side_effect_mode_ok (MULT, operands, 5, 4, 2, 3, 0)” "@
%x6.%s0 [%5=%4+%2%T3],%0") ;; [rx=ry+i] ([%4=%2+%3]) ;; FIXME: These could have anonymous mode for operand 0.
;; QImode
(define_insn “*op_sideqi” [(set (match_operand:QI 0 “register_operand” “=r,r,r”) (match_operator:QI 5 “cris_orthogonal_operator” [(match_operand:QI 1 “register_operand” “0,0,0”) (mem:QI (plus:SI (match_operand:SI 2 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 3 “cris_bdap_operand” “r>Rn,r,>Rn”)))])) (set (match_operand:SI 4 “register_operand” “=*2,r,r”) (plus:SI (match_dup 2) (match_dup 3)))] “cris_side_effect_mode_ok (PLUS, operands, 4, 2, 3, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[3]) != CONST_INT || INTVAL (operands[3]) > 127 || INTVAL (operands[3]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘J’))) return "#"; return "%x5.%s0 [%4=%2%S3],%0"; }”)
;; HImode
(define_insn “*op_sidehi” [(set (match_operand:HI 0 “register_operand” “=r,r,r”) (match_operator:HI 5 “cris_orthogonal_operator” [(match_operand:HI 1 “register_operand” “0,0,0”) (mem:HI (plus:SI (match_operand:SI 2 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 3 “cris_bdap_operand” “r>Rn,r,>Rn”)))])) (set (match_operand:SI 4 “register_operand” “=*2,r,r”) (plus:SI (match_dup 2) (match_dup 3)))] “cris_side_effect_mode_ok (PLUS, operands, 4, 2, 3, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[3]) != CONST_INT || INTVAL (operands[3]) > 127 || INTVAL (operands[3]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘J’))) return "#"; return "%x5.%s0 [%4=%2%S3],%0"; }”)
;; SImode
(define_insn “*op_sidesi” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (match_operator:SI 5 “cris_orthogonal_operator” [(match_operand:SI 1 “register_operand” “0,0,0”) (mem:SI (plus:SI (match_operand:SI 2 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 3 “cris_bdap_operand” “r>Rn,r,>Rn”)))])) (set (match_operand:SI 4 “register_operand” “=*2,r,r”) (plus:SI (match_dup 2) (match_dup 3)))] “cris_side_effect_mode_ok (PLUS, operands, 4, 2, 3, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[3]) != CONST_INT || INTVAL (operands[3]) > 127 || INTVAL (operands[3]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘J’))) return "#"; return "%x5.%s0 [%4=%2%S3],%0"; }”) ;; To match all cases for commutative operations we may have to have the ;; following pattern for add, or & and. I do not know really, but it does ;; not break anything. ;; ;; FIXME: This really ought to be checked. ;; ;; op.S [rx=ry+I],rz; ;; ;; [rx=ry+rz.S] ;; FIXME: These could have anonymous mode for operand 0.
;; QImode
(define_insn “*op_swap_sideqi_biap” [(set (match_operand:QI 0 “register_operand” “=r,r”) (match_operator:QI 6 “cris_commutative_orth_op” [(mem:QI (plus:SI (mult:SI (match_operand:SI 2 “register_operand” “r,r”) (match_operand:SI 3 “const_int_operand” “n,n”)) (match_operand:SI 4 “register_operand” “r,r”))) (match_operand:QI 1 “register_operand” “0,0”)])) (set (match_operand:SI 5 “register_operand” “=*4,r”) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))] “cris_side_effect_mode_ok (MULT, operands, 5, 4, 2, 3, 0)” "@
%x6.%s0 [%5=%4+%2%T3],%0")
;; HImode
(define_insn “*op_swap_sidehi_biap” [(set (match_operand:HI 0 “register_operand” “=r,r”) (match_operator:HI 6 “cris_commutative_orth_op” [(mem:HI (plus:SI (mult:SI (match_operand:SI 2 “register_operand” “r,r”) (match_operand:SI 3 “const_int_operand” “n,n”)) (match_operand:SI 4 “register_operand” “r,r”))) (match_operand:HI 1 “register_operand” “0,0”)])) (set (match_operand:SI 5 “register_operand” “=*4,r”) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))] “cris_side_effect_mode_ok (MULT, operands, 5, 4, 2, 3, 0)” "@
%x6.%s0 [%5=%4+%2%T3],%0")
;; SImode
(define_insn “*op_swap_sidesi_biap” [(set (match_operand:SI 0 “register_operand” “=r,r”) (match_operator:SI 6 “cris_commutative_orth_op” [(mem:SI (plus:SI (mult:SI (match_operand:SI 2 “register_operand” “r,r”) (match_operand:SI 3 “const_int_operand” “n,n”)) (match_operand:SI 4 “register_operand” “r,r”))) (match_operand:SI 1 “register_operand” “0,0”)])) (set (match_operand:SI 5 “register_operand” “=*4,r”) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))] “cris_side_effect_mode_ok (MULT, operands, 5, 4, 2, 3, 0)” "@
%x6.%s0 [%5=%4+%2%T3],%0") ;; [rx=ry+i] ([%4=%2+%3]) ;; FIXME: These could have anonymous mode for operand 0.
;; QImode
(define_insn “*op_swap_sideqi” [(set (match_operand:QI 0 “register_operand” “=r,r,r”) (match_operator:QI 5 “cris_commutative_orth_op” [(mem:QI (plus:SI (match_operand:SI 2 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 3 “cris_bdap_operand” “r>Rn,r,>Rn”))) (match_operand:QI 1 “register_operand” “0,0,0”)])) (set (match_operand:SI 4 “register_operand” “=*2,r,r”) (plus:SI (match_dup 2) (match_dup 3)))] “cris_side_effect_mode_ok (PLUS, operands, 4, 2, 3, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[3]) != CONST_INT || INTVAL (operands[3]) > 127 || INTVAL (operands[3]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘J’))) return "#"; return "%x5.%s0 [%4=%2%S3],%0"; }”)
;; HImode
(define_insn “*op_swap_sidehi” [(set (match_operand:HI 0 “register_operand” “=r,r,r”) (match_operator:HI 5 “cris_commutative_orth_op” [(mem:HI (plus:SI (match_operand:SI 2 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 3 “cris_bdap_operand” “r>Rn,r,>Rn”))) (match_operand:HI 1 “register_operand” “0,0,0”)])) (set (match_operand:SI 4 “register_operand” “=*2,r,r”) (plus:SI (match_dup 2) (match_dup 3)))] “cris_side_effect_mode_ok (PLUS, operands, 4, 2, 3, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[3]) != CONST_INT || INTVAL (operands[3]) > 127 || INTVAL (operands[3]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘J’))) return "#"; return "%x5.%s0 [%4=%2%S3],%0"; }”)
;; SImode
(define_insn “*op_swap_sidesi” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (match_operator:SI 5 “cris_commutative_orth_op” [(mem:SI (plus:SI (match_operand:SI 2 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 3 “cris_bdap_operand” “r>Rn,r,>Rn”))) (match_operand:SI 1 “register_operand” “0,0,0”)])) (set (match_operand:SI 4 “register_operand” “=*2,r,r”) (plus:SI (match_dup 2) (match_dup 3)))] “cris_side_effect_mode_ok (PLUS, operands, 4, 2, 3, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[3]) != CONST_INT || INTVAL (operands[3]) > 127 || INTVAL (operands[3]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘J’))) return "#"; return "%x5.%s0 [%4=%2%S3],%0"; }”) ;; Add operations, standard names.
;; Note that for the ‘P’ constraint, the high part can be -1 or 0. We ;; output the insn through the ‘A’ output modifier as “adds.w” and “addq”, ;; respectively. (define_insn “adddi3” [(set (match_operand:DI 0 “register_operand” “=r,r,r,&r,&r”) (plus:DI (match_operand:DI 1 “register_operand” “%0,0,0,0,r”) (match_operand:DI 2 “general_operand” “J,N,P,g,!To”)))] "" “@ addq %2,%M0;ax;addq 0,%H0 subq %n2,%M0;ax;subq 0,%H0 add%e2.%z2 %2,%M0;ax;%A2 %H2,%H0 add.d %M2,%M0;ax;add.d %H2,%H0 add.d %M2,%M1,%M0;ax;add.d %H2,%H1,%H0”)
(define_insn “addsi3” [(set (match_operand:SI 0 “register_operand” “=r,r,r,r,r,r,r,r”) (plus:SI (match_operand:SI 1 “register_operand” “%0,0,0,0,0,0,r,r”) (match_operand:SI 2 “general_operand” “r,Q>,J,N,n,g,!To,0”)))]
;; The last constraint is due to that after reload, the ‘%’ is not ;; honored, and canonicalization doesn't care about keeping the same ;; register as in destination. This will happen after insn splitting. ;; gcc <= 2.7.2. FIXME: Check for gcc-2.9x
"" “* { switch (which_alternative) { case 0: case 1: return "add.d %2,%0"; case 2: return "addq %2,%0"; case 3: return "subq %n2,%0"; case 4: /* ‘Known value’, but not in -63..63. Check if addu/subu may be used. */ if (INTVAL (operands[2]) > 0) { if (INTVAL (operands[2]) < 256) return "addu.b %2,%0"; if (INTVAL (operands[2]) < 65536) return "addu.w %2,%0"; } else { if (INTVAL (operands[2]) >= -255) return "subu.b %n2,%0"; if (INTVAL (operands[2]) >= -65535) return "subu.w %n2,%0"; } return "add.d %2,%0"; case 6: return "add.d %2,%1,%0"; case 5: return "add.d %2,%0"; case 7: return "add.d %1,%0"; default: return "BOGUS addsi %2+%1 to %0"; } }” [(set_attr “slottable” “yes,yes,yes,yes,no,no,no,yes”)]) (define_insn “addhi3” [(set (match_operand:HI 0 “register_operand” “=r,r,r,r,r,r”) (plus:HI (match_operand:HI 1 “register_operand” “%0,0,0,0,0,r”) (match_operand:HI 2 “general_operand” “r,Q>,J,N,g,!To”)))] "" “@ add.w %2,%0 add.w %2,%0 addq %2,%0 subq %n2,%0 add.w %2,%0 add.w %2,%1,%0” [(set_attr “slottable” “yes,yes,yes,yes,no,no”) (set_attr “cc” “normal,normal,clobber,clobber,normal,normal”)])
(define_insn “addqi3” [(set (match_operand:QI 0 “register_operand” “=r,r,r,r,r,r,r”) (plus:QI (match_operand:QI 1 “register_operand” “%0,0,0,0,0,0,r”) (match_operand:QI 2 “general_operand” “r,Q>,J,N,O,g,!To”)))] "" “@ add.b %2,%0 add.b %2,%0 addq %2,%0 subq %n2,%0 subQ -%b2,%0 add.b %2,%0 add.b %2,%1,%0” [(set_attr “slottable” “yes,yes,yes,yes,yes,no,no”) (set_attr “cc” “normal,normal,clobber,clobber,clobber,normal,normal”)]) ;; Subtract. ;; ;; Note that because of insn canonicalization these will seldom but ;; rarely be used with a known constant as an operand.
;; Note that for the ‘P’ constraint, the high part can be -1 or 0. We ;; output the insn through the ‘D’ output modifier as “subs.w” and “subq”, ;; respectively. (define_insn “subdi3” [(set (match_operand:DI 0 “register_operand” “=r,r,r,&r,&r”) (minus:DI (match_operand:DI 1 “register_operand” “0,0,0,0,r”) (match_operand:DI 2 “general_operand” “J,N,P,g,!To”)))] "" “@ subq %2,%M0;ax;subq 0,%H0 addq %n2,%M0;ax;addq 0,%H0 sub%e2.%z2 %2,%M0;ax;%D2 %H2,%H0 sub.d %M2,%M0;ax;sub.d %H2,%H0 sub.d %M2,%M1,%M0;ax;sub.d %H2,%H1,%H0”)
(define_insn “subsi3” [(set (match_operand:SI 0 “register_operand” “=r,r,r,r,r,r,r,r”) (minus:SI (match_operand:SI 1 “register_operand” “0,0,0,0,0,0,0,r”) (match_operand:SI 2 “general_operand” “r,Q>,J,N,P,n,g,!To”)))] ""
;; This does not do the optimal: “addu.w 65535,r0” when %2 is negative. ;; But then again, %2 should not be negative.
“@ sub.d %2,%0 sub.d %2,%0 subq %2,%0 addq %n2,%0 sub%e2.%z2 %2,%0 sub.d %2,%0 sub.d %2,%0 sub.d %2,%1,%0” [(set_attr “slottable” “yes,yes,yes,yes,no,no,no,no”)]) (define_insn “subhi3” [(set (match_operand:HI 0 “register_operand” “=r,r,r,r,r,r”) (minus:HI (match_operand:HI 1 “register_operand” “0,0,0,0,0,r”) (match_operand:HI 2 “general_operand” “r,Q>,J,N,g,!To”)))] "" “@ sub.w %2,%0 sub.w %2,%0 subq %2,%0 addq %n2,%0 sub.w %2,%0 sub.w %2,%1,%0” [(set_attr “slottable” “yes,yes,yes,yes,no,no”) (set_attr “cc” “normal,normal,clobber,clobber,normal,normal”)])
(define_insn “subqi3” [(set (match_operand:QI 0 “register_operand” “=r,r,r,r,r,r”) (minus:QI (match_operand:QI 1 “register_operand” “0,0,0,0,0,r”) (match_operand:QI 2 “general_operand” “r,Q>,J,N,g,!To”)))] "" “@ sub.b %2,%0 sub.b %2,%0 subq %2,%0 addq %2,%0 sub.b %2,%0 sub.b %2,%1,%0” [(set_attr “slottable” “yes,yes,yes,yes,no,no”) (set_attr “cc” “normal,normal,clobber,clobber,normal,normal”)]) ;; CRIS has some add/sub-with-sign/zero-extend instructions. ;; Although these perform sign/zero-extension to SImode, they are ;; equally applicable for the HImode case. ;; FIXME: Check; GCC should handle the widening. ;; Note that these must be located after the normal add/sub patterns, ;; so not to get constants into any less specific operands. ;; ;; Extend with add/sub and side-effect. ;; ;; ADDS/SUBS/ADDU/SUBU and BOUND, which needs a check for zero_extend ;; ;; adds/subs/addu/subu bound [rx=ry+rz.S] ;; FIXME: These could have anonymous mode for operand 0.
;; QImode to HImode ;; FIXME: GCC should widen.
(define_insn “*extopqihi_side_biap” [(set (match_operand:HI 0 “register_operand” “=r,r”) (match_operator:HI 6 “cris_additive_operand_extend_operator” [(match_operand:HI 1 “register_operand” “0,0”) (match_operator:HI 7 “cris_extend_operator” [(mem:QI (plus:SI (mult:SI (match_operand:SI 2 “register_operand” “r,r”) (match_operand:SI 3 “const_int_operand” “n,n”)) (match_operand:SI 4 “register_operand” “r,r”)))])])) (set (match_operand:SI 5 “register_operand” “=*4,r”) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))] “cris_side_effect_mode_ok (MULT, operands, 5, 4, 2, 3, 0)” "@
%x6%e7.%m7 [%5=%4+%2%T3],%0")
;; QImode to SImode
(define_insn “*extopqisi_side_biap” [(set (match_operand:SI 0 “register_operand” “=r,r”) (match_operator:SI 6 “cris_operand_extend_operator” [(match_operand:SI 1 “register_operand” “0,0”) (match_operator:SI 7 “cris_extend_operator” [(mem:QI (plus:SI (mult:SI (match_operand:SI 2 “register_operand” “r,r”) (match_operand:SI 3 “const_int_operand” “n,n”)) (match_operand:SI 4 “register_operand” “r,r”)))])])) (set (match_operand:SI 5 “register_operand” “=*4,r”) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))] “(GET_CODE (operands[6]) != UMIN || GET_CODE (operands[7]) == ZERO_EXTEND) && cris_side_effect_mode_ok (MULT, operands, 5, 4, 2, 3, 0)” "@
%x6%e7.%m7 [%5=%4+%2%T3],%0")
;; HImode to SImode
(define_insn “*extophisi_side_biap” [(set (match_operand:SI 0 “register_operand” “=r,r”) (match_operator:SI 6 “cris_operand_extend_operator” [(match_operand:SI 1 “register_operand” “0,0”) (match_operator:SI 7 “cris_extend_operator” [(mem:HI (plus:SI (mult:SI (match_operand:SI 2 “register_operand” “r,r”) (match_operand:SI 3 “const_int_operand” “n,n”)) (match_operand:SI 4 “register_operand” “r,r”)))])])) (set (match_operand:SI 5 “register_operand” “=*4,r”) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))] “(GET_CODE (operands[6]) != UMIN || GET_CODE (operands[7]) == ZERO_EXTEND) && cris_side_effect_mode_ok (MULT, operands, 5, 4, 2, 3, 0)” "@
%x6%e7.%m7 [%5=%4+%2%T3],%0")
;; [rx=ry+i] ;; FIXME: These could have anonymous mode for operand 0.
;; QImode to HImode
(define_insn “*extopqihi_side” [(set (match_operand:HI 0 “register_operand” “=r,r,r”) (match_operator:HI 5 “cris_additive_operand_extend_operator” [(match_operand:HI 1 “register_operand” “0,0,0”) (match_operator:HI 6 “cris_extend_operator” [(mem:QI (plus:SI (match_operand:SI 2 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 3 “cris_bdap_operand” “r>Rn,r,>Rn”) ))])])) (set (match_operand:SI 4 “register_operand” “=*2,r,r”) (plus:SI (match_dup 2) (match_dup 3)))] “cris_side_effect_mode_ok (PLUS, operands, 4, 2, 3, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[3]) != CONST_INT || INTVAL (operands[3]) > 127 || INTVAL (operands[3]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘J’))) return "#"; return "%x5%e6.%m6 [%4=%2%S3],%0"; }”)
;; QImode to SImode
(define_insn “*extopqisi_side” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (match_operator:SI 5 “cris_operand_extend_operator” [(match_operand:SI 1 “register_operand” “0,0,0”) (match_operator:SI 6 “cris_extend_operator” [(mem:QI (plus:SI (match_operand:SI 2 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 3 “cris_bdap_operand” “r>Rn,r,>Rn”) ))])])) (set (match_operand:SI 4 “register_operand” “=*2,r,r”) (plus:SI (match_dup 2) (match_dup 3)))]
“(GET_CODE (operands[5]) != UMIN || GET_CODE (operands[6]) == ZERO_EXTEND) && cris_side_effect_mode_ok (PLUS, operands, 4, 2, 3, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[3]) != CONST_INT || INTVAL (operands[3]) > 127 || INTVAL (operands[3]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘J’))) return "#"; return "%x5%e6.%m6 [%4=%2%S3],%0"; }”)
;; HImode to SImode
(define_insn “*extophisi_side” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (match_operator:SI 5 “cris_operand_extend_operator” [(match_operand:SI 1 “register_operand” “0,0,0”) (match_operator:SI 6 “cris_extend_operator” [(mem:HI (plus:SI (match_operand:SI 2 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 3 “cris_bdap_operand” “r>Rn,r,>Rn”) ))])])) (set (match_operand:SI 4 “register_operand” “=*2,r,r”) (plus:SI (match_dup 2) (match_dup 3)))] “(GET_CODE (operands[5]) != UMIN || GET_CODE (operands[6]) == ZERO_EXTEND) && cris_side_effect_mode_ok (PLUS, operands, 4, 2, 3, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[3]) != CONST_INT || INTVAL (operands[3]) > 127 || INTVAL (operands[3]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘J’))) return "#"; return "%x5%e6.%m6 [%4=%2%S3],%0"; }”)
;; As with op.S we may have to add special pattern to match commuted ;; operands to adds/addu and bound ;; ;; adds/addu/bound [rx=ry+rz.S]
;; QImode to HImode ;; FIXME: GCC should widen.
(define_insn “*extopqihi_swap_side_biap” [(set (match_operand:HI 0 “register_operand” “=r,r”) (plus:HI (match_operator:HI 6 “cris_extend_operator” [(mem:QI (plus:SI (mult:SI (match_operand:SI 2 “register_operand” “r,r”) (match_operand:SI 3 “const_int_operand” “n,n”)) (match_operand:SI 4 “register_operand” “r,r”)))]) (match_operand:HI 1 “register_operand” “0,0”))) (set (match_operand:SI 5 “register_operand” “=*4,r”) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))] “cris_side_effect_mode_ok (MULT, operands, 5, 4, 2, 3, 0)” "@
add%e6.b [%5=%4+%2%T3],%0")
;; QImode to SImode
(define_insn “*extopqisi_swap_side_biap” [(set (match_operand:SI 0 “register_operand” “=r,r”) (match_operator:SI 7 “cris_plus_or_bound_operator” [(match_operator:SI 6 “cris_extend_operator” [(mem:QI (plus:SI (mult:SI (match_operand:SI 2 “register_operand” “r,r”) (match_operand:SI 3 “const_int_operand” “n,n”)) (match_operand:SI 4 “register_operand” “r,r”)))]) (match_operand:SI 1 “register_operand” “0,0”)])) (set (match_operand:SI 5 “register_operand” “=*4,r”) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))] “(GET_CODE (operands[7]) != UMIN || GET_CODE (operands[6]) == ZERO_EXTEND) && cris_side_effect_mode_ok (MULT, operands, 5, 4, 2, 3, 0)” "@
%x7%e6.%m6 [%5=%4+%2%T3],%0")
;; HImode to SImode (define_insn “*extophisi_swap_side_biap” [(set (match_operand:SI 0 “register_operand” “=r,r”) (match_operator:SI 7 “cris_plus_or_bound_operator” [(match_operator:SI 6 “cris_extend_operator” [(mem:HI (plus:SI (mult:SI (match_operand:SI 2 “register_operand” “r,r”) (match_operand:SI 3 “const_int_operand” “n,n”)) (match_operand:SI 4 “register_operand” “r,r”)))]) (match_operand:SI 1 “register_operand” “0,0”)])) (set (match_operand:SI 5 “register_operand” “=*4,r”) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))] “(GET_CODE (operands[7]) != UMIN || GET_CODE (operands[6]) == ZERO_EXTEND) && cris_side_effect_mode_ok (MULT, operands, 5, 4, 2, 3, 0)” "@
%x7%e6.%m6 [%5=%4+%2%T3],%0") ;; [rx=ry+i] ;; FIXME: These could have anonymous mode for operand 0. ;; FIXME: GCC should widen.
;; QImode to HImode
(define_insn “*extopqihi_swap_side” [(set (match_operand:HI 0 “register_operand” “=r,r,r”) (plus:HI (match_operator:HI 5 “cris_extend_operator” [(mem:QI (plus:SI (match_operand:SI 2 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 3 “cris_bdap_operand” “r>Rn,r,>Rn”)))]) (match_operand:HI 1 “register_operand” “0,0,0”))) (set (match_operand:SI 4 “register_operand” “=*2,r,r”) (plus:SI (match_dup 2) (match_dup 3)))] “cris_side_effect_mode_ok (PLUS, operands, 4, 2, 3, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[3]) != CONST_INT || INTVAL (operands[3]) > 127 || INTVAL (operands[3]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘J’))) return "#"; return "add%e5.b [%4=%2%S3],%0"; }”)
;; QImode to SImode
(define_insn “*extopqisi_swap_side” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (match_operator:SI 6 “cris_plus_or_bound_operator” [(match_operator:SI 5 “cris_extend_operator” [(mem:QI (plus:SI (match_operand:SI 2 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 3 “cris_bdap_operand” “r>Rn,r,>Rn”)))]) (match_operand:SI 1 “register_operand” “0,0,0”)])) (set (match_operand:SI 4 “register_operand” “=*2,r,r”) (plus:SI (match_dup 2) (match_dup 3)))] “(GET_CODE (operands[6]) != UMIN || GET_CODE (operands[5]) == ZERO_EXTEND) && cris_side_effect_mode_ok (PLUS, operands, 4, 2, 3, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[3]) != CONST_INT || INTVAL (operands[3]) > 127 || INTVAL (operands[3]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘J’))) return "#"; return "%x6%e5.%m5 [%4=%2%S3],%0"; }”)
;; HImode to SImode
(define_insn “*extophisi_swap_side” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (match_operator:SI 6 “cris_plus_or_bound_operator” [(match_operator:SI 5 “cris_extend_operator” [(mem:HI (plus:SI (match_operand:SI 2 “cris_bdap_operand” “%r,r,r”) (match_operand:SI 3 “cris_bdap_operand” “r>Rn,r,>Rn”)))]) (match_operand:SI 1 “register_operand” “0,0,0”)])) (set (match_operand:SI 4 “register_operand” “=*2,r,r”) (plus:SI (match_dup 2) (match_dup 3)))] “(GET_CODE (operands[6]) != UMIN || GET_CODE (operands[5]) == ZERO_EXTEND) && cris_side_effect_mode_ok (PLUS, operands, 4, 2, 3, -1, 0)” “* { if (which_alternative == 0 && (GET_CODE (operands[3]) != CONST_INT || INTVAL (operands[3]) > 127 || INTVAL (operands[3]) < -128 || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘N’) || CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘J’))) return "#"; return "%x6%e5.%m5 [%4=%2%S3],%0"; }”) ;; Extend versions (zero/sign) of normal add/sub (no side-effects). ;; FIXME: These could have anonymous mode for operand 0.
;; QImode to HImode ;; FIXME: GCC should widen.
(define_insn “*extopqihi” [(set (match_operand:HI 0 “register_operand” “=r,r,r,r”) (match_operator:HI 3 “cris_additive_operand_extend_operator” [(match_operand:HI 1 “register_operand” “0,0,0,r”) (match_operator:HI 4 “cris_extend_operator” [(match_operand:QI 2 “nonimmediate_operand” “r,Q>,m,!To”)])]))] “GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD && (operands[1] != frame_pointer_rtx || GET_CODE (operands[3]) != PLUS)” “@ %x3%e4.%m4 %2,%0 %x3%e4.%m4 %2,%0 %x3%e4.%m4 %2,%0 %x3%e4.%m4 %2,%1,%0” [(set_attr “slottable” “yes,yes,no,no”) (set_attr “cc” “clobber”)])
;; QImode to SImode
(define_insn “*extopqisi” [(set (match_operand:SI 0 “register_operand” “=r,r,r,r”) (match_operator:SI 3 “cris_operand_extend_operator” [(match_operand:SI 1 “register_operand” “0,0,0,r”) (match_operator:SI 4 “cris_extend_operator” [(match_operand:QI 2 “nonimmediate_operand” “r,Q>,m,!To”)])]))] “(GET_CODE (operands[3]) != UMIN || GET_CODE (operands[4]) == ZERO_EXTEND) && GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD && (operands[1] != frame_pointer_rtx || GET_CODE (operands[3]) != PLUS)” “@ %x3%e4.%m4 %2,%0 %x3%e4.%m4 %2,%0 %x3%e4.%m4 %2,%0 %x3%e4.%m4 %2,%1,%0” [(set_attr “slottable” “yes,yes,no,no”)])
;; HImode to SImode
(define_insn “*extophisi” [(set (match_operand:SI 0 “register_operand” “=r,r,r,r”) (match_operator:SI 3 “cris_operand_extend_operator” [(match_operand:SI 1 “register_operand” “0,0,0,r”) (match_operator:SI 4 “cris_extend_operator” [(match_operand:HI 2 “nonimmediate_operand” “r,Q>,m,!To”)])]))] “(GET_CODE (operands[3]) != UMIN || GET_CODE (operands[4]) == ZERO_EXTEND) && GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD && (operands[1] != frame_pointer_rtx || GET_CODE (operands[3]) != PLUS)” “@ %x3%e4.%m4 %2,%0 %x3%e4.%m4 %2,%0 %x3%e4.%m4 %2,%0 %x3%e4.%m4 %2,%1,%0” [(set_attr “slottable” “yes,yes,no,no”)])
;; As with the side-effect patterns, may have to have swapped operands for add. ;; FIXME: should be redundant to gcc.
;; QImode to HImode
(define_insn “*extopqihi_swap” [(set (match_operand:HI 0 “register_operand” “=r,r,r,r”) (plus:HI (match_operator:HI 3 “cris_extend_operator” [(match_operand:QI 2 “nonimmediate_operand” “r,Q>,m,!To”)]) (match_operand:HI 1 “register_operand” “0,0,0,r”)))] “operands[1] != frame_pointer_rtx” “@ add%e3.b %2,%0 add%e3.b %2,%0 add%e3.b %2,%0 add%e3.b %2,%1,%0” [(set_attr “slottable” “yes,yes,no,no”) (set_attr “cc” “clobber”)])
;; QImode to SImode
(define_insn “*extopqisi_swap” [(set (match_operand:SI 0 “register_operand” “=r,r,r,r”) (match_operator:SI 4 “cris_plus_or_bound_operator” [(match_operator:SI 3 “cris_extend_operator” [(match_operand:QI 2 “nonimmediate_operand” “r,Q>,m,!To”)]) (match_operand:SI 1 “register_operand” “0,0,0,r”)]))] “(GET_CODE (operands[4]) != UMIN || GET_CODE (operands[3]) == ZERO_EXTEND) && operands[1] != frame_pointer_rtx” “@ %x4%e3.%m3 %2,%0 %x4%e3.%m3 %2,%0 %x4%e3.%m3 %2,%0 %x4%e3.%m3 %2,%1,%0” [(set_attr “slottable” “yes,yes,no,no”)])
;; HImode to SImode
(define_insn “*extophisi_swap” [(set (match_operand:SI 0 “register_operand” “=r,r,r,r”) (match_operator:SI 4 “cris_plus_or_bound_operator” [(match_operator:SI 3 “cris_extend_operator” [(match_operand:HI 2 “nonimmediate_operand” “r,Q>,m,!To”)]) (match_operand:SI 1 “register_operand” “0,0,0,r”)]))] “(GET_CODE (operands[4]) != UMIN || GET_CODE (operands[3]) == ZERO_EXTEND) && operands[1] != frame_pointer_rtx” “@ %x4%e3.%m3 %2,%0 %x4%e3.%m3 %2,%0 %x4%e3.%m3 %2,%0 %x4%e3.%m3 %2,%1,%0” [(set_attr “slottable” “yes,yes,no,no”)]) ;; This is the special case when we use what corresponds to the ;; instruction above in “casesi”. Do not change it to use the generic ;; pattern and “REG 15” as pc; I did that and it led to madness and ;; maintenance problems: Instead of (as imagined) recognizing and removing ;; or replacing this pattern with something simpler, other variant ;; patterns were recognized or combined, including some prefix variants ;; where the value in pc is not that of the next instruction (which means ;; this instruction actually is special and should be marked as such). ;; When switching from the “generic pattern match” approach to this simpler ;; approach, there were insignificant differences in gcc, ipps and ;; product code, somehow due to scratching reload behind the ear or ;; something. Testcase “gcc” looked .01% slower and 4 bytes bigger; ;; product code became .001% smaller but “looked better”. The testcase ;; “ipps” was just different at register allocation). ;; ;; Assumptions in the jump optimizer forces us to use IF_THEN_ELSE in this ;; pattern with the default-label as the else, with the “if” being ;; index-is-less-than the max number of cases plus one. The default-label ;; is attached to the end of the case-table at time of output.
(define_insn “*casesi_adds_w” [(set (pc) (if_then_else (ltu (match_operand:SI 0 “register_operand” “r”) (match_operand:SI 1 “const_int_operand” “n”)) (plus:SI (sign_extend:SI (mem:HI (plus:SI (mult:SI (match_dup 0) (const_int 2)) (pc)))) (pc)) (label_ref (match_operand 2 "" "")))) (use (label_ref (match_operand 3 "" "")))]
“operands[0] != frame_pointer_rtx”
“adds.w [$pc+%0.w],$pc” [(set_attr “cc” “clobber”)]) ;; Multiply instructions.
;; Sometimes powers of 2 (which are normally canonicalized to a ;; left-shift) appear here, as a result of address reloading. ;; As a special, for values 3 and 5, we can match with an addi, so add those. ;; ;; FIXME: This may be unnecessary now. ;; Explicitly named for convenience of having a gen_... function.
(define_insn “addi_mul” [(set (match_operand:SI 0 “register_operand” “=r”) (mult:SI (match_operand:SI 1 “register_operand” “%0”) (match_operand:SI 2 “const_int_operand” “n”)))] “operands[0] != frame_pointer_rtx && operands[1] != frame_pointer_rtx && GET_CODE (operands[2]) == CONST_INT && (INTVAL (operands[2]) == 2 || INTVAL (operands[2]) == 4 || INTVAL (operands[2]) == 3 || INTVAL (operands[2]) == 5)” “* { if (INTVAL (operands[2]) == 2) return "lslq 1,%0"; else if (INTVAL (operands[2]) == 4) return "lslq 2,%0"; else if (INTVAL (operands[2]) == 3) return "addi %0.w,%0"; else if (INTVAL (operands[2]) == 5) return "addi %0.d,%0"; return "BAD: adr_mulsi: %0=%1*%2"; }” [(set_attr “slottable” “yes”) ;; No flags are changed if this insn is “addi”, but it does not seem ;; worth the trouble to distinguish that to the lslq cases. (set_attr “cc” “clobber”)])
;; The addi insn as it is normally used.
(define_insn “*addi” [(set (match_operand:SI 0 “register_operand” “=r”) (plus:SI (mult:SI (match_operand:SI 2 “register_operand” “r”) (match_operand:SI 3 “const_int_operand” “n”)) (match_operand:SI 1 “register_operand” “0”)))] “operands[0] != frame_pointer_rtx && operands[1] != frame_pointer_rtx && GET_CODE (operands[3]) == CONST_INT && (INTVAL (operands[3]) == 1 || INTVAL (operands[3]) == 2 || INTVAL (operands[3]) == 4)” “addi %2%T3,%0” [(set_attr “slottable” “yes”) (set_attr “cc” “none”)])
;; The mstep instruction. Probably not useful by itself; it‘s to ;; non-linear wrt. the other insns. We used to expand to it, so at least ;; it’s correct.
(define_insn “mstep_shift” [(set (match_operand:SI 0 “register_operand” “=r”) (if_then_else:SI (lt:SI (cc0) (const_int 0)) (plus:SI (ashift:SI (match_operand:SI 1 “register_operand” “0”) (const_int 1)) (match_operand:SI 2 “register_operand” “r”)) (ashift:SI (match_operand:SI 3 “register_operand” “0”) (const_int 1))))] "" “mstep %2,%0” [(set_attr “slottable” “yes”)])
;; When illegitimate addresses are legitimized, sometimes gcc forgets ;; to canonicalize the multiplications. ;; ;; FIXME: Check gcc > 2.7.2, remove and possibly fix in gcc.
(define_insn “mstep_mul” [(set (match_operand:SI 0 “register_operand” “=r”) (if_then_else:SI (lt:SI (cc0) (const_int 0)) (plus:SI (mult:SI (match_operand:SI 1 “register_operand” “0”) (const_int 2)) (match_operand:SI 2 “register_operand” “r”)) (mult:SI (match_operand:SI 3 “register_operand” “0”) (const_int 2))))] “operands[0] != frame_pointer_rtx && operands[1] != frame_pointer_rtx && operands[2] != frame_pointer_rtx && operands[3] != frame_pointer_rtx” “mstep %2,%0” [(set_attr “slottable” “yes”)])
(define_insn “umulhisi3” [(set (match_operand:SI 0 “register_operand” “=r”) (mult:SI (zero_extend:SI (match_operand:HI 1 “register_operand” “0”)) (zero_extend:SI (match_operand:HI 2 “register_operand” “r”))))] “TARGET_HAS_MUL_INSNS” “%!mulu.w %2,%0” [(set (attr “slottable”) (if_then_else (ne (symbol_ref “TARGET_MUL_BUG”) (const_int 0)) (const_string “no”) (const_string “yes”))) ;; Just N unusable here, but let's be safe. (set_attr “cc” “clobber”)])
(define_insn “umulqihi3” [(set (match_operand:HI 0 “register_operand” “=r”) (mult:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “0”)) (zero_extend:HI (match_operand:QI 2 “register_operand” “r”))))] “TARGET_HAS_MUL_INSNS” “%!mulu.b %2,%0” [(set (attr “slottable”) (if_then_else (ne (symbol_ref “TARGET_MUL_BUG”) (const_int 0)) (const_string “no”) (const_string “yes”))) ;; Not exactly sure, but let's be safe. (set_attr “cc” “clobber”)])
;; Note that gcc does not make use of such a thing as umulqisi3. It gets ;; confused and will erroneously use it instead of umulhisi3, failing (at ;; least) gcc.c-torture/execute/arith-rand.c at all optimization levels. ;; Inspection of optab code shows that there must be only one widening ;; multiplication per mode widened to.
(define_insn “mulsi3” [(set (match_operand:SI 0 “register_operand” “=r”) (mult:SI (match_operand:SI 1 “register_operand” “0”) (match_operand:SI 2 “register_operand” “r”)))] “TARGET_HAS_MUL_INSNS” “%!muls.d %2,%0” [(set (attr “slottable”) (if_then_else (ne (symbol_ref “TARGET_MUL_BUG”) (const_int 0)) (const_string “no”) (const_string “yes”))) ;; Just N unusable here, but let's be safe. (set_attr “cc” “clobber”)]) ;; A few multiply variations.
;; This really extends to SImode, so cc should be considered clobbered.
(define_insn “mulqihi3” [(set (match_operand:HI 0 “register_operand” “=r”) (mult:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “0”)) (sign_extend:HI (match_operand:QI 2 “register_operand” “r”))))] “TARGET_HAS_MUL_INSNS” “%!muls.b %2,%0” [(set (attr “slottable”) (if_then_else (ne (symbol_ref “TARGET_MUL_BUG”) (const_int 0)) (const_string “no”) (const_string “yes”))) (set_attr “cc” “clobber”)])
(define_insn “mulhisi3” [(set (match_operand:SI 0 “register_operand” “=r”) (mult:SI (sign_extend:SI (match_operand:HI 1 “register_operand” “0”)) (sign_extend:SI (match_operand:HI 2 “register_operand” “r”))))] “TARGET_HAS_MUL_INSNS” “%!muls.w %2,%0” [(set (attr “slottable”) (if_then_else (ne (symbol_ref “TARGET_MUL_BUG”) (const_int 0)) (const_string “no”) (const_string “yes”))) ;; Just N unusable here, but let's be safe. (set_attr “cc” “clobber”)])
;; When needed, we can get the high 32 bits from the overflow ;; register. We don't care to split and optimize these. ;; ;; Note that cc0 is still valid after the move-from-overflow-register ;; insn; no special precaution need to be taken in cris_notice_update_cc.
(define_insn “mulsidi3” [(set (match_operand:DI 0 “register_operand” “=r”) (mult:DI (sign_extend:DI (match_operand:SI 1 “register_operand” “0”)) (sign_extend:DI (match_operand:SI 2 “register_operand” “r”))))] “TARGET_HAS_MUL_INSNS” “%!muls.d %2,%M0;move $mof,%H0”)
(define_insn “umulsidi3” [(set (match_operand:DI 0 “register_operand” “=r”) (mult:DI (zero_extend:DI (match_operand:SI 1 “register_operand” “0”)) (zero_extend:DI (match_operand:SI 2 “register_operand” “r”))))] “TARGET_HAS_MUL_INSNS” “%!mulu.d %2,%M0;move $mof,%H0”)
;; This pattern would probably not be needed if we add “mof” in its own ;; register class (and open a can of worms about /not/ pairing it with a ;; “normal” register). Having multiple register classes here, and ;; applicable to the v10 variant only, seems worse than having these two ;; patterns with multi-insn contents for now (may change; having a free ;; call-clobbered register is worth some trouble).
(define_insn “smulsi3_highpart” [(set (match_operand:SI 0 “nonimmediate_operand” “=r,r,m”) (truncate:SI (lshiftrt:DI (mult:DI (sign_extend:DI (match_operand:SI 1 “register_operand” “%0,r,r”)) (sign_extend:DI (match_operand:SI 2 “register_operand” “r,r,r”))) (const_int 32)))) (clobber (match_scratch:SI 3 “=X,1,1”))] “TARGET_HAS_MUL_INSNS” “%!muls.d %2,%1;move $mof,%0” [(set_attr “cc” “clobber”)])
(define_insn “umulsi3_highpart” [(set (match_operand:SI 0 “nonimmediate_operand” “=r,r,m”) (truncate:SI (lshiftrt:DI (mult:DI (zero_extend:DI (match_operand:SI 1 “register_operand” “%0,r,r”)) (zero_extend:DI (match_operand:SI 2 “register_operand” “r,r,r”))) (const_int 32)))) (clobber (match_scratch:SI 3 “=X,1,1”))] “TARGET_HAS_MUL_INSNS” “%!mulu.d %2,%1;move $mof,%0” [(set_attr “cc” “clobber”)]) ;; Divide and modulus instructions. CRIS only has a step instruction.
(define_insn “dstep_shift” [(set (match_operand:SI 0 “register_operand” “=r”) (if_then_else:SI (geu:SI (ashift:SI (match_operand:SI 1 “register_operand” “0”) (const_int 1)) (match_operand:SI 2 “register_operand” “r”)) (minus:SI (ashift:SI (match_operand:SI 3 “register_operand” “0”) (const_int 1)) (match_operand:SI 4 “register_operand” “2”)) (ashift:SI (match_operand:SI 5 “register_operand” “0”) (const_int 1))))] "" “dstep %2,%0” [(set_attr “slottable” “yes”)])
;; Here's a variant with mult instead of ashift. ;; ;; FIXME: This should be investigated. Which one matches through combination?
(define_insn “dstep_mul” [(set (match_operand:SI 0 “register_operand” “=r”) (if_then_else:SI (geu:SI (mult:SI (match_operand:SI 1 “register_operand” “0”) (const_int 2)) (match_operand:SI 2 “register_operand” “r”)) (minus:SI (mult:SI (match_operand:SI 3 “register_operand” “0”) (const_int 2)) (match_operand:SI 4 “register_operand” “2”)) (mult:SI (match_operand:SI 5 “register_operand” “0”) (const_int 2))))] “operands[0] != frame_pointer_rtx && operands[1] != frame_pointer_rtx && operands[2] != frame_pointer_rtx && operands[3] != frame_pointer_rtx” “dstep %2,%0” [(set_attr “slottable” “yes”)]) ;; Logical operators.
;; Bitwise “and”.
;; There is no use in defining “anddi3”, because gcc can expand this by ;; itself, and make reasonable code without interference.
;; If the first operand is memory or a register and is the same as the ;; second operand, and the third operand is -256 or -65536, we can use ;; CLEAR instead. Or, if the first operand is a register, and the third ;; operand is 255 or 65535, we can zero_extend. ;; GCC isn't smart enough to recognize these cases (yet), and they seem ;; to be common enough to be worthwhile. ;; FIXME: This should be made obsolete.
(define_expand “andsi3” [(set (match_operand:SI 0 “nonimmediate_operand” "") (and:SI (match_operand:SI 1 “nonimmediate_operand” "") (match_operand:SI 2 “general_operand” "")))] "" " { if (! (GET_CODE (operands[2]) == CONST_INT && (((INTVAL (operands[2]) == -256 || INTVAL (operands[2]) == -65536) && rtx_equal_p (operands[1], operands[0])) || ((INTVAL (operands[2]) == 255 || INTVAL (operands[2]) == 65535) && REG_P (operands[0]))))) { /* Make intermediate steps if operand0 is not a register or operand1 is not a register, and hope that the reload pass will make something useful out of it. Note that the operands are not canonicalized. For the moment, I chicken out on this, because all or most ports do not describe ‘and’ with canonicalized operands, and I seem to remember magic in reload, checking that operand1 has constraint ‘%0’, in which case operand0 and operand1 must have similar predicates. FIXME: Investigate. */ rtx reg0 = REG_P (operands[0]) ? operands[0] : gen_reg_rtx (SImode); rtx reg1 = operands[1];
if (! REG_P (reg1)) { emit_move_insn (reg0, reg1); reg1 = reg0; } emit_insn (gen_rtx_SET (SImode, reg0, gen_rtx_AND (SImode, reg1, operands[2]))); /* Make sure we get the right *final* destination. */ if (! REG_P (operands[0])) emit_move_insn (operands[0], reg0); DONE; }
}")
;; Some special cases of andsi3.
(define_insn “*andsi_movu” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (and:SI (match_operand:SI 1 “nonimmediate_operand” “%r,Q,To”) (match_operand:SI 2 “const_int_operand” “n,n,n”)))] “(INTVAL (operands[2]) == 255 || INTVAL (operands[2]) == 65535) && (GET_CODE (operands[1]) != MEM || ! MEM_VOLATILE_P (operands[1]))” “movu.%z2 %1,%0” [(set_attr “slottable” “yes,yes,no”)])
(define_insn “*andsi_clear” [(set (match_operand:SI 0 “nonimmediate_operand” “=r,r,Q,Q,To,To”) (and:SI (match_operand:SI 1 “nonimmediate_operand” “%0,0,0,0,0,0”) (match_operand:SI 2 “const_int_operand” “P,n,P,n,P,n”)))] “(INTVAL (operands[2]) == -65536 || INTVAL (operands[2]) == -256) && (GET_CODE (operands[0]) != MEM || ! MEM_VOLATILE_P (operands[0]))” “@ cLear.b %0 cLear.w %0 cLear.b %0 cLear.w %0 cLear.b %0 cLear.w %0” [(set_attr “slottable” “yes,yes,yes,yes,no,no”) (set_attr “cc” “none”)])
;; This is a catch-all pattern, taking care of everything that was not ;; matched in the insns above. ;; ;; Sidenote: the tightening from “nonimmediate_operand” to ;; “register_operand” for operand 1 actually increased the register ;; pressure (worse code). That will hopefully change with an ;; improved reload pass.
(define_insn “*expanded_andsi” [(set (match_operand:SI 0 “register_operand” “=r,r,r,r,r”) (and:SI (match_operand:SI 1 “register_operand” “%0,0,0,0,r”) (match_operand:SI 2 “general_operand” “I,r,Q>,g,!To”)))] "" “@ andq %2,%0 and.d %2,%0 and.d %2,%0 and.d %2,%0 and.d %2,%1,%0” [(set_attr “slottable” “yes,yes,yes,no,no”)]) ;; For both QI and HI we may use the quick patterns. This results in ;; useless condition codes, but that is used rarely enough for it to ;; normally be a win (could check ahead for use of cc0, but seems to be ;; more pain than win).
;; FIXME: See note for andsi3
(define_expand “andhi3” [(set (match_operand:HI 0 “nonimmediate_operand” "") (and:HI (match_operand:HI 1 “nonimmediate_operand” "") (match_operand:HI 2 “general_operand” "")))] "" " { if (! (GET_CODE (operands[2]) == CONST_INT && (((INTVAL (operands[2]) == -256 || INTVAL (operands[2]) == 65280) && rtx_equal_p (operands[1], operands[0])) || (INTVAL (operands[2]) == 255 && REG_P (operands[0]))))) { /* See comment for andsi3. */ rtx reg0 = REG_P (operands[0]) ? operands[0] : gen_reg_rtx (HImode); rtx reg1 = operands[1];
if (! REG_P (reg1)) { emit_move_insn (reg0, reg1); reg1 = reg0; } emit_insn (gen_rtx_SET (HImode, reg0, gen_rtx_AND (HImode, reg1, operands[2]))); /* Make sure we get the right destination. */ if (! REG_P (operands[0])) emit_move_insn (operands[0], reg0); DONE; }
}")
;; Some fast andhi3 special cases.
(define_insn “*andhi_movu” [(set (match_operand:HI 0 “register_operand” “=r,r,r”) (and:HI (match_operand:HI 1 “nonimmediate_operand” “r,Q,To”) (const_int 255)))] “GET_CODE (operands[1]) != MEM || ! MEM_VOLATILE_P (operands[1])” “mOvu.b %1,%0” [(set_attr “slottable” “yes,yes,no”)])
(define_insn “*andhi_clear” [(set (match_operand:HI 0 “nonimmediate_operand” “=r,Q,To”) (and:HI (match_operand:HI 1 “nonimmediate_operand” “0,0,0”) (const_int -256)))] “GET_CODE (operands[0]) != MEM || ! MEM_VOLATILE_P (operands[0])” “cLear.b %0” [(set_attr “slottable” “yes,yes,no”) (set_attr “cc” “none”)])
;; Catch-all andhi3 pattern.
(define_insn “*expanded_andhi” [(set (match_operand:HI 0 “register_operand” “=r,r,r,r,r,r,r”) (and:HI (match_operand:HI 1 “register_operand” “%0,0,0,0,0,0,r”) (match_operand:HI 2 “general_operand” “I,r,Q>,L,O,g,!To”)))]
;; Sidenote: the tightening from “general_operand” to ;; “register_operand” for operand 1 actually increased the register ;; pressure (worse code). That will hopefully change with an ;; improved reload pass.
"" “@ andq %2,%0 and.w %2,%0 and.w %2,%0 and.w %2,%0 anDq %b2,%0 and.w %2,%0 and.w %2,%1,%0” [(set_attr “slottable” “yes,yes,yes,no,yes,no,no”) (set_attr “cc” “clobber,normal,normal,normal,clobber,normal,normal”)])
;; A strict_low_part pattern.
(define_insn “*andhi_lowpart” [(set (strict_low_part (match_operand:HI 0 “register_operand” “=r,r,r,r,r,r”)) (and:HI (match_operand:HI 1 “register_operand” “%0,0,0,0,0,r”) (match_operand:HI 2 “general_operand” “r,Q>,L,O,g,!To”)))] "" “@ and.w %2,%0 and.w %2,%0 and.w %2,%0 anDq %b2,%0 and.w %2,%0 and.w %2,%1,%0” [(set_attr “slottable” “yes,yes,no,yes,no,no”) (set_attr “cc” “normal,normal,normal,clobber,normal,normal”)]) (define_insn “andqi3” [(set (match_operand:QI 0 “register_operand” “=r,r,r,r,r,r”) (and:QI (match_operand:QI 1 “register_operand” “%0,0,0,0,0,r”) (match_operand:QI 2 “general_operand” “I,r,Q>,O,g,!To”)))] "" “@ andq %2,%0 and.b %2,%0 and.b %2,%0 andQ %b2,%0 and.b %2,%0 and.b %2,%1,%0” [(set_attr “slottable” “yes,yes,yes,yes,no,no”) (set_attr “cc” “clobber,normal,normal,clobber,normal,normal”)])
(define_insn “*andqi_lowpart” [(set (strict_low_part (match_operand:QI 0 “register_operand” “=r,r,r,r,r”)) (and:QI (match_operand:QI 1 “register_operand” “%0,0,0,0,r”) (match_operand:QI 2 “general_operand” “r,Q>,O,g,!To”)))] "" “@ and.b %2,%0 and.b %2,%0 andQ %b2,%0 and.b %2,%0 and.b %2,%1,%0” [(set_attr “slottable” “yes,yes,yes,no,no”) (set_attr “cc” “normal,normal,clobber,normal,normal”)]) ;; Bitwise or.
;; Same comment as anddi3 applies here - no need for such a pattern.
;; It seems there's no need to jump through hoops to get good code such as ;; with andsi3.
(define_insn “iorsi3” [(set (match_operand:SI 0 “register_operand” “=r,r,r,r,r,r”) (ior:SI (match_operand:SI 1 “register_operand” “%0,0,0,0,0,r”) (match_operand:SI 2 “general_operand” “I,r,Q>,n,g,!To”)))] "" “@ orq %2,%0 or.d %2,%0 or.d %2,%0 oR.%s2 %2,%0 or.d %2,%0 or.d %2,%1,%0” [(set_attr “slottable” “yes,yes,yes,no,no,no”) (set_attr “cc” “normal,normal,normal,clobber,normal,normal”)])
(define_insn “iorhi3” [(set (match_operand:HI 0 “register_operand” “=r,r,r,r,r,r,r”) (ior:HI (match_operand:HI 1 “register_operand” “%0,0,0,0,0,0,r”) (match_operand:HI 2 “general_operand” “I,r,Q>,L,O,g,!To”)))] "" “@ orq %2,%0 or.w %2,%0 or.w %2,%0 or.w %2,%0 oRq %b2,%0 or.w %2,%0 or.w %2,%1,%0” [(set_attr “slottable” “yes,yes,yes,no,yes,no,no”) (set_attr “cc” “clobber,normal,normal,normal,clobber,normal,normal”)])
(define_insn “iorqi3” [(set (match_operand:QI 0 “register_operand” “=r,r,r,r,r,r”) (ior:QI (match_operand:QI 1 “register_operand” “%0,0,0,0,0,r”) (match_operand:QI 2 “general_operand” “I,r,Q>,O,g,!To”)))] "" “@ orq %2,%0 or.b %2,%0 or.b %2,%0 orQ %b2,%0 or.b %2,%0 or.b %2,%1,%0” [(set_attr “slottable” “yes,yes,yes,yes,no,no”) (set_attr “cc” “clobber,normal,normal,clobber,normal,normal”)]) ;; Exclusive-or
;; See comment about “anddi3” for xordi3 - no need for such a pattern.
(define_insn “xorsi3” [(set (match_operand:SI 0 “register_operand” “=r”) (xor:SI (match_operand:SI 1 “register_operand” “%0”) (match_operand:SI 2 “register_operand” “r”)))] "" “xor %2,%0” [(set_attr “slottable” “yes”)])
(define_insn “xorhi3” [(set (match_operand:HI 0 “register_operand” “=r”) (xor:HI (match_operand:HI 1 “register_operand” “%0”) (match_operand:HI 2 “register_operand” “r”)))] "" “xor %2,%0” [(set_attr “slottable” “yes”) (set_attr “cc” “clobber”)])
(define_insn “xorqi3” [(set (match_operand:QI 0 “register_operand” “=r”) (xor:QI (match_operand:QI 1 “register_operand” “%0”) (match_operand:QI 2 “register_operand” “r”)))] "" “xor %2,%0” [(set_attr “slottable” “yes”) (set_attr “cc” “clobber”)]) ;; Negation insns.
;; Questionable use, here mostly as a (slightly usable) define_expand ;; example.
(define_expand “negsf2” [(set (match_dup 2) (match_dup 3)) (parallel [(set (match_operand:SF 0 “register_operand” “=r”) (neg:SF (match_operand:SF 1 “register_operand” “0”))) (use (match_dup 2))])] "" " { operands[2] = gen_reg_rtx (SImode); operands[3] = GEN_INT (1 << 31); }")
(define_insn “*expanded_negsf2” [(set (match_operand:SF 0 “register_operand” “=r”) (neg:SF (match_operand:SF 1 “register_operand” “0”))) (use (match_operand:SI 2 “register_operand” “r”))] "" “xor %2,%0” [(set_attr “slottable” “yes”)])
;; No “negdi2” although we could make one up that may be faster than ;; the one in libgcc.
(define_insn “negsi2” [(set (match_operand:SI 0 “register_operand” “=r”) (neg:SI (match_operand:SI 1 “register_operand” “r”)))] "" “neg.d %1,%0” [(set_attr “slottable” “yes”)])
(define_insn “neghi2” [(set (match_operand:HI 0 “register_operand” “=r”) (neg:HI (match_operand:HI 1 “register_operand” “r”)))] "" “neg.w %1,%0” [(set_attr “slottable” “yes”)])
(define_insn “negqi2” [(set (match_operand:QI 0 “register_operand” “=r”) (neg:QI (match_operand:QI 1 “register_operand” “r”)))] "" “neg.b %1,%0” [(set_attr “slottable” “yes”)]) ;; One-complements.
;; See comment on anddi3 - no need for a DImode pattern.
(define_insn “one_cmplsi2” [(set (match_operand:SI 0 “register_operand” “=r”) (not:SI (match_operand:SI 1 “register_operand” “0”)))] "" “not %0” [(set_attr “slottable” “yes”)])
(define_insn “one_cmplhi2” [(set (match_operand:HI 0 “register_operand” “=r”) (not:HI (match_operand:HI 1 “register_operand” “0”)))] "" “not %0” [(set_attr “slottable” “yes”) (set_attr “cc” “clobber”)])
(define_insn “one_cmplqi2” [(set (match_operand:QI 0 “register_operand” “=r”) (not:QI (match_operand:QI 1 “register_operand” “0”)))] "" “not %0” [(set_attr “slottable” “yes”) (set_attr “cc” “clobber”)]) ;; Arithmetic shift right.
(define_insn “ashrsi3” [(set (match_operand:SI 0 “register_operand” “=r”) (ashiftrt:SI (match_operand:SI 1 “register_operand” “0”) (match_operand:SI 2 “nonmemory_operand” “Kr”)))] "" "* { if (REG_S_P (operands[2])) return "asr.d %2,%0";
return "asrq %2,%0"; }" [(set_attr “slottable” “yes”)])
;; Since gcc gets lost, and forgets to zero-extend the source (or mask ;; the destination) when it changes shifts of lower modes into SImode, ;; it is better to make these expands an anonymous patterns instead of ;; the more correct define_insns. This occurs when gcc thinks that is ;; is better to widen to SImode and use immediate shift count.
;; FIXME: Is this legacy or still true for gcc >= 2.7.2?
(define_expand “ashrhi3” [(set (match_dup 3) (sign_extend:SI (match_operand:HI 1 “nonimmediate_operand” “rm”))) (set (match_dup 4) (zero_extend:SI (match_operand:HI 2 “nonimmediate_operand” “rm”))) (set (match_dup 5) (ashiftrt:SI (match_dup 3) (match_dup 4))) (set (match_operand:HI 0 “general_operand” “=g”) (subreg:HI (match_dup 5) 0))] "" " { int i;
for (i = 3; i < 6; i++) operands[i] = gen_reg_rtx (SImode); }")
(define_insn “*expanded_ashrhi” [(set (match_operand:HI 0 “register_operand” “=r”) (ashiftrt:HI (match_operand:HI 1 “register_operand” “0”) (match_operand:HI 2 “register_operand” “r”)))] "" “asr.w %2,%0” [(set_attr “slottable” “yes”)])
(define_insn “*ashrhi_lowpart” [(set (strict_low_part (match_operand:HI 0 “register_operand” “+r”)) (ashiftrt:HI (match_dup 0) (match_operand:HI 1 “register_operand” “r”)))] "" “asr.w %1,%0” [(set_attr “slottable” “yes”)])
;; Same comment goes as for “ashrhi3”.
(define_expand “ashrqi3” [(set (match_dup 3) (sign_extend:SI (match_operand:QI 1 “nonimmediate_operand” “g”))) (set (match_dup 4) (zero_extend:SI (match_operand:QI 2 “nonimmediate_operand” “g”))) (set (match_dup 5) (ashiftrt:SI (match_dup 3) (match_dup 4))) (set (match_operand:QI 0 “general_operand” “=g”) (subreg:QI (match_dup 5) 0))] "" " { int i;
for (i = 3; i < 6; i++) operands[i] = gen_reg_rtx (SImode); }")
(define_insn “*expanded_ashrqi” [(set (match_operand:QI 0 “register_operand” “=r”) (ashiftrt:QI (match_operand:QI 1 “register_operand” “0”) (match_operand:QI 2 “register_operand” “r”)))] "" “asr.b %2,%0” [(set_attr “slottable” “yes”)])
;; A strict_low_part matcher.
(define_insn “*ashrqi_lowpart” [(set (strict_low_part (match_operand:QI 0 “register_operand” “+r”)) (ashiftrt:QI (match_dup 0) (match_operand:QI 1 “register_operand” “r”)))] "" “asr.b %1,%0” [(set_attr “slottable” “yes”)]) ;; Logical shift right.
(define_insn “lshrsi3” [(set (match_operand:SI 0 “register_operand” “=r”) (lshiftrt:SI (match_operand:SI 1 “register_operand” “0”) (match_operand:SI 2 “nonmemory_operand” “Kr”)))] "" "* { if (REG_S_P (operands[2])) return "lsr.d %2,%0";
return "lsrq %2,%0"; }" [(set_attr “slottable” “yes”)])
;; Same comments as for ashrhi3.
(define_expand “lshrhi3” [(set (match_dup 3) (zero_extend:SI (match_operand:HI 1 “nonimmediate_operand” “g”))) (set (match_dup 4) (zero_extend:SI (match_operand:HI 2 “nonimmediate_operand” “g”))) (set (match_dup 5) (lshiftrt:SI (match_dup 3) (match_dup 4))) (set (match_operand:HI 0 “general_operand” “=g”) (subreg:HI (match_dup 5) 0))] "" " { int i;
for (i = 3; i < 6; i++) operands[i] = gen_reg_rtx (SImode); }")
(define_insn “*expanded_lshrhi” [(set (match_operand:HI 0 “register_operand” “=r”) (lshiftrt:HI (match_operand:HI 1 “register_operand” “0”) (match_operand:HI 2 “register_operand” “r”)))] "" “lsr.w %2,%0” [(set_attr “slottable” “yes”)])
;; A strict_low_part matcher.
(define_insn “*lshrhi_lowpart” [(set (strict_low_part (match_operand:HI 0 “register_operand” “+r”)) (lshiftrt:HI (match_dup 0) (match_operand:HI 1 “register_operand” “r”)))] "" “lsr.w %1,%0” [(set_attr “slottable” “yes”)])
;; Same comments as for ashrhi3.
(define_expand “lshrqi3” [(set (match_dup 3) (zero_extend:SI (match_operand:QI 1 “nonimmediate_operand” “g”))) (set (match_dup 4) (zero_extend:SI (match_operand:QI 2 “nonimmediate_operand” “g”))) (set (match_dup 5) (lshiftrt:SI (match_dup 3) (match_dup 4))) (set (match_operand:QI 0 “general_operand” “=g”) (subreg:QI (match_dup 5) 0))] "" " { int i;
for (i = 3; i < 6; i++) operands[i] = gen_reg_rtx (SImode); }")
(define_insn “*expanded_lshrqi” [(set (match_operand:QI 0 “register_operand” “=r”) (lshiftrt:QI (match_operand:QI 1 “register_operand” “0”) (match_operand:QI 2 “register_operand” “r”)))] "" “lsr.b %2,%0” [(set_attr “slottable” “yes”)])
;; A strict_low_part matcher.
(define_insn “*lshrqi_lowpart” [(set (strict_low_part (match_operand:QI 0 “register_operand” “+r”)) (lshiftrt:QI (match_dup 0) (match_operand:QI 1 “register_operand” “r”)))] "" “lsr.b %1,%0” [(set_attr “slottable” “yes”)]) ;; Arithmetic/logical shift left.
(define_insn “ashlsi3” [(set (match_operand:SI 0 “register_operand” “=r”) (ashift:SI (match_operand:SI 1 “register_operand” “0”) (match_operand:SI 2 “nonmemory_operand” “Kr”)))] "" "* { if (REG_S_P (operands[2])) return "lsl.d %2,%0";
return "lslq %2,%0"; }" [(set_attr “slottable” “yes”)])
;; For narrower modes than SI, we can use lslq although it makes cc ;; unusable. The win is that we do not have to reload the shift-count ;; into a register.
(define_insn “ashlhi3” [(set (match_operand:HI 0 “register_operand” “=r,r”) (ashift:HI (match_operand:HI 1 “register_operand” “0,0”) (match_operand:HI 2 “nonmemory_operand” “r,K”)))] "" “* { return (GET_CODE (operands[2]) == CONST_INT && INTVAL (operands[2]) > 15) ? "moveq 0,%0" : (CONSTANT_P (operands[2]) ? "lslq %2,%0" : "lsl.w %2,%0"); }” [(set_attr “slottable” “yes”) (set_attr “cc” “normal,clobber”)])
;; A strict_low_part matcher.
(define_insn “*ashlhi_lowpart” [(set (strict_low_part (match_operand:HI 0 “register_operand” “+r”)) (ashift:HI (match_dup 0) (match_operand:HI 1 “register_operand” “r”)))] "" “lsl.w %1,%0” [(set_attr “slottable” “yes”)])
(define_insn “ashlqi3” [(set (match_operand:QI 0 “register_operand” “=r,r”) (ashift:QI (match_operand:QI 1 “register_operand” “0,0”) (match_operand:QI 2 “nonmemory_operand” “r,K”)))] "" “* { return (GET_CODE (operands[2]) == CONST_INT && INTVAL (operands[2]) > 7) ? "moveq 0,%0" : (CONSTANT_P (operands[2]) ? "lslq %2,%0" : "lsl.b %2,%0"); }” [(set_attr “slottable” “yes”) (set_attr “cc” “normal,clobber”)])
;; A strict_low_part matcher.
(define_insn “*ashlqi_lowpart” [(set (strict_low_part (match_operand:QI 0 “register_operand” “+r”)) (ashift:QI (match_dup 0) (match_operand:QI 1 “register_operand” “r”)))] "" “lsl.b %1,%0” [(set_attr “slottable” “yes”)]) ;; Various strange insns that gcc likes.
;; Fortunately, it is simple to construct an abssf (although it may not ;; be very much used in practice).
(define_insn “abssf2” [(set (match_operand:SF 0 “register_operand” “=r”) (abs:SF (match_operand:SF 1 “register_operand” “0”)))] "" “lslq 1,%0;lsrq 1,%0”)
(define_insn “abssi2” [(set (match_operand:SI 0 “register_operand” “=r”) (abs:SI (match_operand:SI 1 “register_operand” “r”)))] "" “abs %1,%0” [(set_attr “slottable” “yes”)])
;; FIXME: GCC should be able to do these expansions itself.
(define_expand “abshi2” [(set (match_dup 2) (sign_extend:SI (match_operand:HI 1 “general_operand” “g”))) (set (match_dup 3) (abs:SI (match_dup 2))) (set (match_operand:HI 0 “register_operand” “=r”) (subreg:HI (match_dup 3) 0))] "" “operands[2] = gen_reg_rtx (SImode); operands[3] = gen_reg_rtx (SImode);”)
(define_expand “absqi2” [(set (match_dup 2) (sign_extend:SI (match_operand:QI 1 “general_operand” “g”))) (set (match_dup 3) (abs:SI (match_dup 2))) (set (match_operand:QI 0 “register_operand” “=r”) (subreg:QI (match_dup 3) 0))] "" “operands[2] = gen_reg_rtx (SImode); operands[3] = gen_reg_rtx (SImode);”) ;; Bound-insn. Defined to be the same as an unsigned minimum, which is an ;; operation supported by gcc. Used in casesi, but used now and then in ;; normal code too.
(define_insn “uminsi3” [(set (match_operand:SI 0 “register_operand” “=r,r,r,r”) (umin:SI (match_operand:SI 1 “register_operand” “%0,0,0,r”) (match_operand:SI 2 “general_operand” “r,Q>,g,!STo”)))] "" "* { if (GET_CODE (operands[2]) == CONST_INT) { if (INTVAL (operands[2]) < 256) return "bound.b %2,%0";
if (INTVAL (operands[2]) < 65536) return \"bound.w %2,%0\"; }
else if (which_alternative == 3) return "bound.d %2,%1,%0";
return "bound.d %2,%0"; }" [(set_attr “slottable” “yes,yes,no,no”)]) ;; Jump and branch insns.
(define_insn “jump” [(set (pc) (label_ref (match_operand 0 "" "")))] "" “ba %l0%#” [(set_attr “slottable” “has_slot”)])
;; Testcase gcc.c-torture/compile/991213-3.c fails if we allow a constant ;; here, since the insn is not recognized as an indirect jump by ;; jmp_uses_reg_or_mem used by computed_jump_p. Perhaps it is a kludge to ;; change from general_operand to nonimmediate_operand (at least the docs ;; should be changed), but then again the pattern is called indirect_jump. (define_insn “indirect_jump” [(set (pc) (match_operand:SI 0 “nonimmediate_operand” “rm”))] "" “jump %0”)
;; Return insn. Used whenever the epilogue is very simple; if it is only ;; a single ret or jump [sp+] or a contiguous sequence of movem:able saved ;; registers. No allocated stack space is allowed. ;; Note that for this pattern, although named, it is ok to check the ;; context of the insn in the test, not only compiler switches.
(define_insn “return” [(return)] “cris_simple_epilogue ()” "* { int i;
/* Just needs to hold a ‘movem [sp+],rN’. */ char rd[sizeof ("movem [$sp+],$r99")];
/* Try to avoid reorg.c surprises; avoid emitting invalid code, prefer crashing. This test would have avoided invalid code for target/7042. */ if (current_function_epilogue_delay_list != NULL) abort ();
*rd = 0;
/* Start from the last call-saved register. We know that we have a simple epilogue, so we just have to find the last register in the movem sequence. */ for (i = 8; i >= 0; i--) if (regs_ever_live[i] || (i == PIC_OFFSET_TABLE_REGNUM && current_function_uses_pic_offset_table)) break;
if (i >= 0) sprintf (rd, "movem [$sp+],$%s", reg_names [i]);
if (regs_ever_live[CRIS_SRP_REGNUM]) { if (*rd) output_asm_insn (rd, operands); return "jump [$sp+]"; }
if (*rd) { output_asm_insn ("reT", operands); output_asm_insn (rd, operands); return ""; }
return "ret%#"; }" [(set (attr “slottable”) (if_then_else (ne (symbol_ref “regs_ever_live[CRIS_SRP_REGNUM]”) (const_int 0)) (const_string “no”) ; If jump then not slottable. (if_then_else (ne (symbol_ref “(regs_ever_live[0] || (flag_pic != 0 && regs_ever_live[1]) || (PIC_OFFSET_TABLE_REGNUM == 0 && cris_cfun_uses_pic_table ()))”) (const_int 0)) (const_string “no”) ; ret+movem [sp+],rx: slot already filled. (const_string “has_slot”)))) ; If ret then need to fill a slot. (set_attr “cc” “none”)]) ;; Conditional branches.
;; We suffer from the same overflow-bit-gets-in-the-way problem as ;; e.g. m68k, so we have to check if overflow bit is set on all “signed” ;; conditions.
(define_insn “beq” [(set (pc) (if_then_else (eq (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" “beq %l0%#” [(set_attr “slottable” “has_slot”)])
(define_insn “bne” [(set (pc) (if_then_else (ne (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" “bne %l0%#” [(set_attr “slottable” “has_slot”)])
(define_insn “bgt” [(set (pc) (if_then_else (gt (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" “* { return (cc_prev_status.flags & CC_NO_OVERFLOW) ? 0 : "bgt %l0%#"; }” [(set_attr “slottable” “has_slot”)])
(define_insn “bgtu” [(set (pc) (if_then_else (gtu (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" “bhi %l0%#” [(set_attr “slottable” “has_slot”)])
(define_insn “blt” [(set (pc) (if_then_else (lt (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" “* { return (cc_prev_status.flags & CC_NO_OVERFLOW) ? "bmi %l0%#" : "blt %l0%#"; }” [(set_attr “slottable” “has_slot”)])
(define_insn “bltu” [(set (pc) (if_then_else (ltu (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" “blo %l0%#” [(set_attr “slottable” “has_slot”)])
(define_insn “bge” [(set (pc) (if_then_else (ge (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" “* { return (cc_prev_status.flags & CC_NO_OVERFLOW) ? "bpl %l0%#" : "bge %l0%#"; }” [(set_attr “slottable” “has_slot”)])
(define_insn “bgeu” [(set (pc) (if_then_else (geu (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" “bhs %l0%#” [(set_attr “slottable” “has_slot”)])
(define_insn “ble” [(set (pc) (if_then_else (le (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" “* { return (cc_prev_status.flags & CC_NO_OVERFLOW) ? 0 : "ble %l0%#"; }” [(set_attr “slottable” “has_slot”)])
(define_insn “bleu” [(set (pc) (if_then_else (leu (cc0) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc)))] "" “bls %l0%#” [(set_attr “slottable” “has_slot”)]) ;; Reversed anonymous patterns to the ones above, as mandated.
(define_insn “*beq_reversed” [(set (pc) (if_then_else (eq (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" “bne %l0%#” [(set_attr “slottable” “has_slot”)])
(define_insn “*bne_reversed” [(set (pc) (if_then_else (ne (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" “beq %l0%#” [(set_attr “slottable” “has_slot”)])
(define_insn “*bgt_reversed” [(set (pc) (if_then_else (gt (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" “* { return (cc_prev_status.flags & CC_NO_OVERFLOW) ? 0 : "ble %l0%#"; }” [(set_attr “slottable” “has_slot”)])
(define_insn “*bgtu_reversed” [(set (pc) (if_then_else (gtu (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" “bls %l0%#” [(set_attr “slottable” “has_slot”)])
(define_insn “*blt_reversed” [(set (pc) (if_then_else (lt (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" “* { return (cc_prev_status.flags & CC_NO_OVERFLOW) ? "bpl %l0%#" : "bge %l0%#"; }” [(set_attr “slottable” “has_slot”)])
(define_insn “*bltu_reversed” [(set (pc) (if_then_else (ltu (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" “bhs %l0%#” [(set_attr “slottable” “has_slot”)])
(define_insn “*bge_reversed” [(set (pc) (if_then_else (ge (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" “* { return (cc_prev_status.flags & CC_NO_OVERFLOW) ? "bmi %l0%#" : "blt %l0%#"; }” [(set_attr “slottable” “has_slot”)])
(define_insn “*bgeu_reversed” [(set (pc) (if_then_else (geu (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" “blo %l0%#” [(set_attr “slottable” “has_slot”)])
(define_insn “*ble_reversed” [(set (pc) (if_then_else (le (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" “* { return (cc_prev_status.flags & CC_NO_OVERFLOW) ? 0 : "bgt %l0%#"; }” [(set_attr “slottable” “has_slot”)])
(define_insn “*bleu_reversed” [(set (pc) (if_then_else (leu (cc0) (const_int 0)) (pc) (label_ref (match_operand 0 "" ""))))] "" “bhi %l0%#” [(set_attr “slottable” “has_slot”)]) ;; Set on condition: sCC.
;; Like bCC, we have to check the overflow bit for ;; signed conditions.
(define_insn “sgeu” [(set (match_operand:SI 0 “register_operand” “=r”) (geu:SI (cc0) (const_int 0)))] "" “shs %0” [(set_attr “slottable” “yes”) (set_attr “cc” “none”)])
(define_insn “sltu” [(set (match_operand:SI 0 “register_operand” “=r”) (ltu:SI (cc0) (const_int 0)))] "" “slo %0” [(set_attr “slottable” “yes”) (set_attr “cc” “none”)])
(define_insn “seq” [(set (match_operand:SI 0 “register_operand” “=r”) (eq:SI (cc0) (const_int 0)))] "" “seq %0” [(set_attr “slottable” “yes”) (set_attr “cc” “none”)])
(define_insn “sge” [(set (match_operand:SI 0 “register_operand” “=r”) (ge:SI (cc0) (const_int 0)))] "" “* { return (cc_prev_status.flags & CC_NO_OVERFLOW) ? "spl %0" : "sge %0"; }” [(set_attr “slottable” “yes”) (set_attr “cc” “none”)])
(define_insn “sgt” [(set (match_operand:SI 0 “register_operand” “=r”) (gt:SI (cc0) (const_int 0)))] "" “* { return (cc_prev_status.flags & CC_NO_OVERFLOW) ? 0 : "sgt %0"; }” [(set_attr “slottable” “yes”) (set_attr “cc” “none”)])
(define_insn “sgtu” [(set (match_operand:SI 0 “register_operand” “=r”) (gtu:SI (cc0) (const_int 0)))] "" “shi %0” [(set_attr “slottable” “yes”) (set_attr “cc” “none”)])
(define_insn “sle” [(set (match_operand:SI 0 “register_operand” “=r”) (le:SI (cc0) (const_int 0)))] "" “* { return (cc_prev_status.flags & CC_NO_OVERFLOW) ? 0 : "sle %0"; }” [(set_attr “slottable” “yes”) (set_attr “cc” “none”)])
(define_insn “sleu” [(set (match_operand:SI 0 “register_operand” “=r”) (leu:SI (cc0) (const_int 0)))] "" “sls %0” [(set_attr “slottable” “yes”) (set_attr “cc” “none”)])
(define_insn “slt” [(set (match_operand:SI 0 “register_operand” “=r”) (lt:SI (cc0) (const_int 0)))] "" “* { return (cc_prev_status.flags & CC_NO_OVERFLOW) ? "smi %0" : "slt %0"; }” [(set_attr “slottable” “yes”) (set_attr “cc” “none”)])
(define_insn “sne” [(set (match_operand:SI 0 “register_operand” “=r”) (ne:SI (cc0) (const_int 0)))] "" “sne %0” [(set_attr “slottable” “yes”) (set_attr “cc” “none”)]) ;; Call insns.
;; We need to make these patterns “expand”, since the real operand is ;; hidden in a (mem:QI ) inside operand[0] (call_value: operand[1]), ;; and cannot be checked if it were a “normal” pattern. ;; Note that “call” and “call_value” are always called with a ;; mem-operand for operand 0 and 1 respective. What happens for combined ;; instructions is a different issue.
(define_expand “call” [(parallel [(call (match_operand:QI 0 “cris_mem_call_operand” "") (match_operand 1 “general_operand” "")) ;; 16 is the srp (can't use the symbolic name here) (clobber (reg:SI 16))])] "" " { rtx op0;
if (GET_CODE (operands[0]) != MEM) abort ();
if (flag_pic) { op0 = XEXP (operands[0], 0);
/* It might be that code can be generated that jumps to 0 (or to a specific address). Don't abort on that. At least there's a testcase. */ if (CONSTANT_ADDRESS_P (op0) && GET_CODE (op0) != CONST_INT) { if (no_new_pseudos) abort (); /* For local symbols (non-PLT), get the plain symbol reference into a register. For symbols that can be PLT, make them PLT. */ if (cris_gotless_symbol (op0) || GET_CODE (op0) != SYMBOL_REF) op0 = force_reg (Pmode, op0); else if (cris_symbol (op0)) /* FIXME: Would hanging a REG_EQUIV/EQUAL on that register for the symbol cause bad recombinatorial effects? */ op0 = force_reg (Pmode, gen_rtx_CONST (VOIDmode, gen_rtx_UNSPEC (VOIDmode, gen_rtvec (1, op0), 0))); else abort (); operands[0] = replace_equiv_address (operands[0], op0); } }
}")
;; Accept anything as operand 1. Accept operands for operand 0 in ;; order of preference (Q includes r, but r is shorter, faster)
(define_insn “*expanded_call” [(call (mem:QI (match_operand:SI 0 “cris_general_operand_or_plt_symbol” “r,Q>,g,S”)) (match_operand 1 "" "")) (clobber (reg:SI 16))] ;; 16 is the srp (can't use symbolic name) “! TARGET_AVOID_GOTPLT” “jsr %0”)
;; Same as above, since can‘t afford wasting a constraint letter to mean ;; “S unless TARGET_AVOID_GOTPLT”. (define_insn “*expanded_call_no_gotplt” [(call (mem:QI (match_operand:SI 0 “cris_general_operand_or_plt_symbol” “r,Q>,g”)) (match_operand 1 "" "")) (clobber (reg:SI 16))] ;; 16 is the srp (can’t use symbolic name) “TARGET_AVOID_GOTPLT” “jsr %0”)
(define_expand “call_value” [(parallel [(set (match_operand 0 "" "") (call (match_operand:QI 1 “cris_mem_call_operand” "") (match_operand 2 "" ""))) ;; 16 is the srp (can't use symbolic name) (clobber (reg:SI 16))])] "" " { rtx op1;
if (GET_CODE (operands[1]) != MEM) abort ();
if (flag_pic) { op1 = XEXP (operands[1], 0);
/* It might be that code can be generated that jumps to 0 (or to a specific address). Don't abort on that. At least there's a testcase. */ if (CONSTANT_ADDRESS_P (op1) && GET_CODE (op1) != CONST_INT) { if (no_new_pseudos) abort (); if (cris_gotless_symbol (op1)) op1 = force_reg (Pmode, op1); else if (cris_symbol (op1)) /* FIXME: Would hanging a REG_EQUIV/EQUAL on that register for the symbol cause bad recombinatorial effects? */ op1 = force_reg (Pmode, gen_rtx_CONST (VOIDmode, gen_rtx_UNSPEC (VOIDmode, gen_rtvec (1, op1), 0))); else abort (); operands[1] = replace_equiv_address (operands[1], op1); } }
}")
;; Accept anything as operand 2. The validity other than “general” of ;; operand 0 will be checked elsewhere. Accept operands for operand 1 in ;; order of preference (Q includes r, but r is shorter, faster). ;; We also accept a PLT symbol. We output it as [rPIC+sym:GOTPLT] rather ;; than requiring getting rPIC + sym:PLT into a register.
(define_insn “*expanded_call_value” [(set (match_operand 0 “nonimmediate_operand” “=g,g,g,g”) (call (mem:QI (match_operand:SI 1 “cris_general_operand_or_plt_symbol” “r,Q>,g,S”)) (match_operand 2 "" ""))) (clobber (reg:SI 16))] “! TARGET_AVOID_GOTPLT” “Jsr %1” [(set_attr “cc” “clobber”)])
;; Same as above, since can't afford wasting a constraint letter to mean ;; “S unless TARGET_AVOID_GOTPLT”. (define_insn “*expanded_call_value_no_gotplt” [(set (match_operand 0 “nonimmediate_operand” “=g,g,g”) (call (mem:QI (match_operand:SI 1 “cris_general_operand_or_plt_symbol” “r,Q>,g”)) (match_operand 2 "" ""))) (clobber (reg:SI 16))] “TARGET_AVOID_GOTPLT” “Jsr %1” [(set_attr “cc” “clobber”)])
;; Used in debugging. No use for the direct pattern; unfilled ;; delayed-branches are taken care of by other means.
(define_insn “nop” [(const_int 0)] "" “nop” [(set_attr “cc” “none”)]) ;; We expand on casesi so we can use “bound” and “add offset fetched from ;; a table to pc” (adds.w [pc+%0.w],pc).
;; Note: if you change the “parallel” (or add anything after it) in ;; this expansion, you must change the macro ASM_OUTPUT_CASE_END ;; accordingly, to add the default case at the end of the jump-table.
(define_expand “casesi” [(set (match_dup 5) (match_operand:SI 0 “general_operand” "")) (set (match_dup 6) (minus:SI (match_dup 5) (match_operand:SI 1 “const_int_operand” “n”))) (set (match_dup 7) (umin:SI (match_dup 6) (match_operand:SI 2 “const_int_operand” “n”))) (parallel [(set (pc) (if_then_else (ltu (match_dup 7) (match_dup 2)) (plus:SI (sign_extend:SI (mem:HI (plus:SI (mult:SI (match_dup 7) (const_int 2)) (pc)))) (pc)) (label_ref (match_operand 4 "" "")))) (use (label_ref (match_operand 3 "" "“)))])] "" " { operands[2] = plus_constant (operands[2], 1); operands[5] = gen_reg_rtx (SImode); operands[6] = gen_reg_rtx (SImode); operands[7] = gen_reg_rtx (SImode); }”) ;; Split-patterns. Some of them have modes unspecified. This ;; should always be ok; if for no other reason sparc.md has it as ;; well. ;; ;; When register_operand is specified for an operand, we can get a ;; subreg as well (Axis-990331), so don't just assume that REG_P is true ;; for a register_operand and that REGNO can be used as is. It is best to ;; guard with REG_P, unless it is worth it to adjust for the subreg case.
;; op [rx + 0],ry,rz ;; The index to rx is optimized into zero, and gone.
;; First, recognize bound [rx],ry,rz; where [rx] is zero-extended, ;; and add/sub [rx],ry,rz, with zero or sign-extend on [rx]. ;; Split this into: ;; move ry,rz ;; op [rx],rz ;; Lose if rz=ry or rx=rz. ;; Call this op-extend-split
(define_split [(set (match_operand 0 “register_operand” "") (match_operator 4 “cris_operand_extend_operator” [(match_operand 1 “register_operand” "") (match_operator 3 “cris_extend_operator” [(match_operand 2 “memory_operand” "")])]))] “REG_P (operands[0]) && REG_P (operands[1]) && REGNO (operands[1]) != REGNO (operands[0]) && GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD && REG_P (XEXP (operands[2], 0)) && REGNO (XEXP (operands[2], 0)) != REGNO (operands[0])” [(set (match_dup 0) (match_dup 1)) (set (match_dup 0) (match_op_dup 4 [(match_dup 0) (match_op_dup 3 [(match_dup 2)])]))] "")
;; As op-extend-split, but recognize and split op [rz],ry,rz into ;; ext [rz],rz ;; op ry,rz ;; Do this for plus or bound only, being commutative operations, since we ;; have swapped the operands. ;; Call this op-extend-split-rx=rz
(define_split [(set (match_operand 0 “register_operand” "") (match_operator 4 “cris_plus_or_bound_operator” [(match_operand 1 “register_operand” "") (match_operator 3 “cris_extend_operator” [(match_operand 2 “memory_operand” "")])]))] “REG_P (operands[0]) && REG_P (operands[1]) && REGNO (operands[1]) != REGNO (operands[0]) && GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD && REG_P (XEXP (operands[2], 0)) && REGNO (XEXP (operands[2], 0)) == REGNO (operands[0])” [(set (match_dup 0) (match_op_dup 3 [(match_dup 2)])) (set (match_dup 0) (match_op_dup 4 [(match_dup 0) (match_dup 1)]))] "")
;; As the op-extend-split, but swapped operands, and only for ;; plus or bound, being the commutative extend-operators. FIXME: Why is ;; this needed? Is it? ;; Call this op-extend-split-swapped
(define_split [(set (match_operand 0 “register_operand” "") (match_operator 4 “cris_plus_or_bound_operator” [(match_operator 3 “cris_extend_operator” [(match_operand 2 “memory_operand” "")]) (match_operand 1 “register_operand” "")]))] “REG_P (operands[0]) && REG_P (operands[1]) && REGNO (operands[1]) != REGNO (operands[0]) && GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD && REG_P (XEXP (operands[2], 0)) && REGNO (XEXP (operands[2], 0)) != REGNO (operands[0])” [(set (match_dup 0) (match_dup 1)) (set (match_dup 0) (match_op_dup 4 [(match_dup 0) (match_op_dup 3 [(match_dup 2)])]))] "")
;; As op-extend-split-rx=rz, but swapped operands, only for plus or ;; bound. Call this op-extend-split-swapped-rx=rz.
(define_split [(set (match_operand 0 “register_operand” "") (match_operator 4 “cris_plus_or_bound_operator” [(match_operator 3 “cris_extend_operator” [(match_operand 2 “memory_operand” "")]) (match_operand 1 “register_operand” "")]))] “REG_P (operands[0]) && REG_P (operands[1]) && REGNO (operands[1]) != REGNO (operands[0]) && GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD && REG_P (XEXP (operands[2], 0)) && REGNO (XEXP (operands[2], 0)) == REGNO (operands[0])” [(set (match_dup 0) (match_op_dup 3 [(match_dup 2)])) (set (match_dup 0) (match_op_dup 4 [(match_dup 0) (match_dup 1)]))] "")
;; As op-extend-split, but the mem operand is not extended. ;; ;; op [rx],ry,rz changed into ;; move ry,rz ;; op [rx],rz ;; lose if ry=rz or rx=rz ;; Call this op-extend.
(define_split [(set (match_operand 0 “register_operand” "") (match_operator 3 “cris_orthogonal_operator” [(match_operand 1 “register_operand” "") (match_operand 2 “memory_operand” "")]))] “REG_P (operands[0]) && REG_P (operands[1]) && REGNO (operands[1]) != REGNO (operands[0]) && GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD && REG_P (XEXP (operands[2], 0)) && REGNO (XEXP (operands[2], 0)) != REGNO (operands[0])” [(set (match_dup 0) (match_dup 1)) (set (match_dup 0) (match_op_dup 3 [(match_dup 0) (match_dup 2)]))] "")
;; As op-extend-split-rx=rz, non-extended. ;; Call this op-split-rx=rz
(define_split [(set (match_operand 0 “register_operand” "") (match_operator 3 “cris_commutative_orth_op” [(match_operand 2 “memory_operand” "") (match_operand 1 “register_operand” "")]))] “REG_P (operands[0]) && REG_P (operands[1]) && REGNO (operands[1]) != REGNO (operands[0]) && GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD && REG_P (XEXP (operands[2], 0)) && REGNO (XEXP (operands[2], 0)) != REGNO (operands[0])” [(set (match_dup 0) (match_dup 1)) (set (match_dup 0) (match_op_dup 3 [(match_dup 0) (match_dup 2)]))] "")
;; As op-extend-split-swapped, nonextended. ;; Call this op-split-swapped.
(define_split [(set (match_operand 0 “register_operand” "") (match_operator 3 “cris_commutative_orth_op” [(match_operand 1 “register_operand” "") (match_operand 2 “memory_operand” "")]))] “REG_P (operands[0]) && REG_P (operands[1]) && REGNO (operands[1]) != REGNO (operands[0]) && GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD && REG_P (XEXP (operands[2], 0)) && REGNO (XEXP (operands[2], 0)) == REGNO (operands[0])” [(set (match_dup 0) (match_dup 2)) (set (match_dup 0) (match_op_dup 3 [(match_dup 0) (match_dup 1)]))] "")
;; As op-extend-split-swapped-rx=rz, non-extended. ;; Call this op-split-swapped-rx=rz.
(define_split [(set (match_operand 0 “register_operand” "") (match_operator 3 “cris_orthogonal_operator” [(match_operand 2 “memory_operand” "") (match_operand 1 “register_operand” "")]))] “REG_P (operands[0]) && REG_P (operands[1]) && REGNO (operands[1]) != REGNO (operands[0]) && GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD && REG_P (XEXP (operands[2], 0)) && REGNO (XEXP (operands[2], 0)) == REGNO (operands[0])” [(set (match_dup 0) (match_dup 2)) (set (match_dup 0) (match_op_dup 3 [(match_dup 0) (match_dup 1)]))] "") ;; Splits for all cases in side-effect insns where (possibly after reload ;; and register allocation) rx and ry in [rx=ry+i] are equal.
;; move.S1 [rx=rx+rz.S2],ry
(define_split [(parallel [(set (match_operand 0 “register_operand” "") (match_operator 6 “cris_mem_op” [(plus:SI (mult:SI (match_operand:SI 1 “register_operand” "") (match_operand:SI 2 “const_int_operand” "")) (match_operand:SI 3 “register_operand” ""))])) (set (match_operand:SI 4 “register_operand” "") (plus:SI (mult:SI (match_dup 1) (match_dup 2)) (match_dup 3)))])] “REG_P (operands[3]) && REG_P (operands[4]) && REGNO (operands[3]) == REGNO (operands[4])” [(set (match_dup 4) (plus:SI (mult:SI (match_dup 1) (match_dup 2)) (match_dup 3))) (set (match_dup 0) (match_dup 5))] “operands[5] = replace_equiv_address (operands[6], operands[3]);”)
;; move.S1 [rx=rx+i],ry
(define_split [(parallel [(set (match_operand 0 “register_operand” "") (match_operator 5 “cris_mem_op” [(plus:SI (match_operand:SI 1 “cris_bdap_operand” "") (match_operand:SI 2 “cris_bdap_operand” ""))])) (set (match_operand:SI 3 “register_operand” "") (plus:SI (match_dup 1) (match_dup 2)))])] “(rtx_equal_p (operands[3], operands[1]) || rtx_equal_p (operands[3], operands[2]))” [(set (match_dup 3) (plus:SI (match_dup 1) (match_dup 2))) (set (match_dup 0) (match_dup 4))] “operands[4] = replace_equiv_address (operands[5], operands[3]);”)
;; move.S1 ry,[rx=rx+rz.S2]
(define_split [(parallel [(set (match_operator 6 “cris_mem_op” [(plus:SI (mult:SI (match_operand:SI 0 “register_operand” "") (match_operand:SI 1 “const_int_operand” "")) (match_operand:SI 2 “register_operand” ""))]) (match_operand 3 “register_operand” "")) (set (match_operand:SI 4 “register_operand” "") (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2)))])] “REG_P (operands[2]) && REG_P (operands[4]) && REGNO (operands[4]) == REGNO (operands[2])” [(set (match_dup 4) (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2))) (set (match_dup 5) (match_dup 3))] “operands[5] = replace_equiv_address (operands[6], operands[4]);”)
;; move.S1 ry,[rx=rx+i]
(define_split [(parallel [(set (match_operator 6 “cris_mem_op” [(plus:SI (match_operand:SI 0 “cris_bdap_operand” "") (match_operand:SI 1 “cris_bdap_operand” ""))]) (match_operand 2 “register_operand” "")) (set (match_operand:SI 3 “register_operand” "") (plus:SI (match_dup 0) (match_dup 1)))])] “(rtx_equal_p (operands[3], operands[0]) || rtx_equal_p (operands[3], operands[1]))” [(set (match_dup 3) (plus:SI (match_dup 0) (match_dup 1))) (set (match_dup 5) (match_dup 2))] “operands[5] = replace_equiv_address (operands[6], operands[3]);”)
;; clear.d [rx=rx+rz.S2]
(define_split [(parallel [(set (mem:SI (plus:SI (mult:SI (match_operand:SI 0 “register_operand” "") (match_operand:SI 1 “const_int_operand” "")) (match_operand:SI 2 “register_operand” ""))) (const_int 0)) (set (match_operand:SI 3 “register_operand” "") (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2)))])] “REG_P (operands[2]) && REG_P (operands[3]) && REGNO (operands[3]) == REGNO (operands[2])” [(set (match_dup 3) (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2))) (set (mem:SI (match_dup 3)) (const_int 0))] "")
;; clear.w [rx=rx+rz.S2]
(define_split [(parallel [(set (mem:HI (plus:SI (mult:SI (match_operand:SI 0 “register_operand” "") (match_operand:SI 1 “const_int_operand” "")) (match_operand:SI 2 “register_operand” ""))) (const_int 0)) (set (match_operand:SI 3 “register_operand” "") (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2)))])] “REG_P (operands[2]) && REG_P (operands[3]) && REGNO (operands[3]) == REGNO (operands[2])” [(set (match_dup 3) (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2))) (set (mem:HI (match_dup 3)) (const_int 0))] "")
;; clear.b [rx=rx+rz.S2]
(define_split [(parallel [(set (mem:QI (plus:SI (mult:SI (match_operand:SI 0 “register_operand” "") (match_operand:SI 1 “const_int_operand” "")) (match_operand:SI 2 “register_operand” ""))) (const_int 0)) (set (match_operand:SI 3 “register_operand” "") (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2)))])] “REG_P (operands[2]) && REG_P (operands[3]) && REGNO (operands[3]) == REGNO (operands[2])” [(set (match_dup 3) (plus:SI (mult:SI (match_dup 0) (match_dup 1)) (match_dup 2))) (set (mem:QI (match_dup 3)) (const_int 0))] "")
;; clear.d [rx=rx+i]
(define_split [(parallel [(set (mem:SI (plus:SI (match_operand:SI 0 “cris_bdap_operand” "") (match_operand:SI 1 “cris_bdap_operand” ""))) (const_int 0)) (set (match_operand:SI 2 “register_operand” "") (plus:SI (match_dup 0) (match_dup 1)))])] “(rtx_equal_p (operands[0], operands[2]) || rtx_equal_p (operands[2], operands[1]))” [(set (match_dup 2) (plus:SI (match_dup 0) (match_dup 1))) (set (mem:SI (match_dup 2)) (const_int 0))] "")
;; clear.w [rx=rx+i]
(define_split [(parallel [(set (mem:HI (plus:SI (match_operand:SI 0 “cris_bdap_operand” "") (match_operand:SI 1 “cris_bdap_operand” ""))) (const_int 0)) (set (match_operand:SI 2 “register_operand” "") (plus:SI (match_dup 0) (match_dup 1)))])] “(rtx_equal_p (operands[0], operands[2]) || rtx_equal_p (operands[2], operands[1]))” [(set (match_dup 2) (plus:SI (match_dup 0) (match_dup 1))) (set (mem:HI (match_dup 2)) (const_int 0))] "")
;; clear.b [rx=rx+i]
(define_split [(parallel [(set (mem:QI (plus:SI (match_operand:SI 0 “cris_bdap_operand” "") (match_operand:SI 1 “cris_bdap_operand” ""))) (const_int 0)) (set (match_operand:SI 2 “register_operand” "") (plus:SI (match_dup 0) (match_dup 1)))])] “(rtx_equal_p (operands[0], operands[2]) || rtx_equal_p (operands[2], operands[1]))” [(set (match_dup 2) (plus:SI (match_dup 0) (match_dup 1))) (set (mem:QI (match_dup 2)) (const_int 0))] "")
;; mov(s|u).S1 [rx=rx+rz.S2],ry
(define_split [(parallel [(set (match_operand 0 “register_operand” "") (match_operator 5 “cris_extend_operator” [(mem (plus:SI (mult:SI (match_operand:SI 1 “register_operand” "") (match_operand:SI 2 “const_int_operand” "")) (match_operand:SI 3 “register_operand” "")))])) (set (match_operand:SI 4 “register_operand” "") (plus:SI (mult:SI (match_dup 1) (match_dup 2)) (match_dup 3)))])] “REG_P (operands[3]) && REG_P (operands[4]) && REGNO (operands[3]) == REGNO (operands[4])” [(set (match_dup 4) (plus:SI (mult:SI (match_dup 1) (match_dup 2)) (match_dup 3))) (set (match_dup 0) (match_op_dup 5 [(match_dup 6)]))] “operands[6] = replace_equiv_address (XEXP (operands[5], 0), operands[4]);”)
;; mov(s|u).S1 [rx=rx+i],ry
(define_split [(parallel [(set (match_operand 0 “register_operand” "") (match_operator 4 “cris_extend_operator” [(mem (plus:SI (match_operand:SI 1 “cris_bdap_operand” "") (match_operand:SI 2 “cris_bdap_operand” "")))])) (set (match_operand:SI 3 “register_operand” "") (plus:SI (match_dup 1) (match_dup 2)))])] “(rtx_equal_p (operands[1], operands[3]) || rtx_equal_p (operands[2], operands[3]))” [(set (match_dup 3) (plus:SI (match_dup 1) (match_dup 2))) (set (match_dup 0) (match_op_dup 4 [(match_dup 5)]))] “operands[5] = replace_equiv_address (XEXP (operands[4], 0), operands[3]);”)
;; op.S1 [rx=rx+i],ry
(define_split [(parallel [(set (match_operand 0 “register_operand” "") (match_operator 5 “cris_orthogonal_operator” [(match_operand 1 “register_operand” "") (mem (plus:SI (match_operand:SI 2 “cris_bdap_operand” "") (match_operand:SI 3 “cris_bdap_operand” "")))])) (set (match_operand:SI 4 “register_operand” "") (plus:SI (match_dup 2) (match_dup 3)))])] “(rtx_equal_p (operands[4], operands[2]) || rtx_equal_p (operands[4], operands[3]))” [(set (match_dup 4) (plus:SI (match_dup 2) (match_dup 3))) (set (match_dup 0) (match_op_dup 5 [(match_dup 1) (match_dup 6)]))] “operands[6] = replace_equiv_address (XEXP (operands[5], 1), operands[4]);”)
;; op.S1 [rx=rx+rz.S2],ry
(define_split [(parallel [(set (match_operand 0 “register_operand” "") (match_operator 6 “cris_orthogonal_operator” [(match_operand 1 “register_operand” "") (mem (plus:SI (mult:SI (match_operand:SI 2 “register_operand” "") (match_operand:SI 3 “const_int_operand” "")) (match_operand:SI 4 “register_operand” "")))])) (set (match_operand:SI 5 “register_operand” "") (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))])] “REG_P (operands[4]) && REG_P (operands[5]) && REGNO (operands[5]) == REGNO (operands[4])” [(set (match_dup 5) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4))) (set (match_dup 0) (match_op_dup 6 [(match_dup 1) (match_dup 7)]))] “operands[7] = replace_equiv_address (XEXP (operands[6], 1), operands[5]);”)
;; op.S1 [rx=rx+rz.S2],ry (swapped)
(define_split [(parallel [(set (match_operand 0 “register_operand” "") (match_operator 6 “cris_commutative_orth_op” [(mem (plus:SI (mult:SI (match_operand:SI 2 “register_operand” "") (match_operand:SI 3 “const_int_operand” "")) (match_operand:SI 4 “register_operand” ""))) (match_operand 1 “register_operand” "")])) (set (match_operand:SI 5 “register_operand” "") (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))])] “REG_P (operands[4]) && REG_P (operands[5]) && REGNO (operands[5]) == REGNO (operands[4])” [(set (match_dup 5) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4))) (set (match_dup 0) (match_op_dup 6 [(match_dup 7) (match_dup 1)]))] “operands[7] = replace_equiv_address (XEXP (operands[6], 0), operands[5]);”)
;; op.S1 [rx=rx+i],ry (swapped)
(define_split [(parallel [(set (match_operand 0 “register_operand” "") (match_operator 5 “cris_commutative_orth_op” [(mem (plus:SI (match_operand:SI 2 “cris_bdap_operand” "") (match_operand:SI 3 “cris_bdap_operand” ""))) (match_operand 1 “register_operand” "")])) (set (match_operand:SI 4 “register_operand” "") (plus:SI (match_dup 2) (match_dup 3)))])] “(rtx_equal_p (operands[4], operands[2]) || rtx_equal_p (operands[4], operands[3]))” [(set (match_dup 4) (plus:SI (match_dup 2) (match_dup 3))) (set (match_dup 0) (match_op_dup 5 [(match_dup 6) (match_dup 1)]))] “operands[6] = replace_equiv_address (XEXP (operands[5], 0), operands[4]);”)
;; op(s|u).S1 [rx=rx+rz.S2],ry
(define_split [(parallel [(set (match_operand 0 “register_operand” "") (match_operator 6 “cris_operand_extend_operator” [(match_operand 1 “register_operand” "") (match_operator 7 “cris_extend_operator” [(mem (plus:SI (mult:SI (match_operand:SI 2 “register_operand” "") (match_operand:SI 3 “const_int_operand” "")) (match_operand:SI 4 “register_operand” "")))])])) (set (match_operand:SI 5 “register_operand” "") (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))])] “REG_P (operands[4]) && REG_P (operands[5]) && REGNO (operands[5]) == REGNO (operands[4])” [(set (match_dup 5) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4))) (set (match_dup 0) (match_op_dup 6 [(match_dup 1) (match_dup 8)]))] “operands[8] = gen_rtx (GET_CODE (operands[7]), GET_MODE (operands[7]), replace_equiv_address (XEXP (operands[7], 0), operands[5]));”)
;; op(s|u).S1 [rx=rx+i],ry
(define_split [(parallel [(set (match_operand 0 “register_operand” "") (match_operator 5 “cris_operand_extend_operator” [(match_operand 1 “register_operand” "") (match_operator 6 “cris_extend_operator” [(mem (plus:SI (match_operand:SI 2 “cris_bdap_operand” "") (match_operand:SI 3 “cris_bdap_operand” "") ))])])) (set (match_operand:SI 4 “register_operand” "") (plus:SI (match_dup 2) (match_dup 3)))])] “(rtx_equal_p (operands[4], operands[2]) || rtx_equal_p (operands[4], operands[3]))” [(set (match_dup 4) (plus:SI (match_dup 2) (match_dup 3))) (set (match_dup 0) (match_op_dup 5 [(match_dup 1) (match_dup 7)]))] “operands[7] = gen_rtx (GET_CODE (operands[6]), GET_MODE (operands[6]), replace_equiv_address (XEXP (operands[6], 0), operands[4]));”)
;; op(s|u).S1 [rx=rx+rz.S2],ry (swapped, plus or bound)
(define_split [(parallel [(set (match_operand 0 “register_operand” "") (match_operator 7 “cris_plus_or_bound_operator” [(match_operator 6 “cris_extend_operator” [(mem (plus:SI (mult:SI (match_operand:SI 2 “register_operand” "") (match_operand:SI 3 “const_int_operand” "")) (match_operand:SI 4 “register_operand” "")))]) (match_operand 1 “register_operand” "")])) (set (match_operand:SI 5 “register_operand” "") (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4)))])] “REG_P (operands[4]) && REG_P (operands[5]) && REGNO (operands[5]) == REGNO (operands[4])” [(set (match_dup 5) (plus:SI (mult:SI (match_dup 2) (match_dup 3)) (match_dup 4))) (set (match_dup 0) (match_op_dup 6 [(match_dup 8) (match_dup 1)]))] “operands[8] = gen_rtx (GET_CODE (operands[6]), GET_MODE (operands[6]), replace_equiv_address (XEXP (operands[6], 0), operands[5]));”)
;; op(s|u).S1 [rx=rx+i],ry (swapped, plus or bound)
(define_split [(parallel [(set (match_operand 0 “register_operand” "") (match_operator 6 “cris_plus_or_bound_operator” [(match_operator 5 “cris_extend_operator” [(mem (plus:SI (match_operand:SI 2 “cris_bdap_operand” "") (match_operand:SI 3 “cris_bdap_operand” "")))]) (match_operand 1 “register_operand” "")])) (set (match_operand:SI 4 “register_operand” "") (plus:SI (match_dup 2) (match_dup 3)))])] “(rtx_equal_p (operands[4], operands[2]) || rtx_equal_p (operands[4], operands[3]))” [(set (match_dup 4) (plus:SI (match_dup 2) (match_dup 3))) (set (match_dup 0) (match_op_dup 6 [(match_dup 7) (match_dup 1)]))] “operands[7] = gen_rtx (GET_CODE (operands[5]), GET_MODE (operands[5]), replace_equiv_address (XEXP (operands[5], 0), operands[4]));”) ;; Splits for addressing prefixes that have no side-effects, so we can ;; fill a delay slot. Never split if we lose something, though.
;; If we have a ;; move [indirect_ref],rx ;; where indirect ref = {const, [r+], [r]}, it costs as much as ;; move indirect_ref,rx ;; move [rx],rx ;; Take care not to allow indirect_ref = register.
;; We're not allowed to generate copies of registers with different mode ;; until after reload; copying pseudos upsets reload. CVS as of ;; 2001-08-24, unwind-dw2-fde.c, _Unwind_Find_FDE ICE in ;; cselib_invalidate_regno.
(define_split [(set (match_operand 0 “register_operand” "") (match_operand 1 “indirect_operand” ""))] “reload_completed && REG_P (operands[0]) && GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD && (GET_CODE (XEXP (operands[1], 0)) == MEM || CONSTANT_P (XEXP (operands[1], 0)))” [(set (match_dup 2) (match_dup 4)) (set (match_dup 0) (match_dup 3))] “operands[2] = gen_rtx_REG (Pmode, REGNO (operands[0])); operands[3] = replace_equiv_address (operands[1], operands[2]); operands[4] = XEXP (operands[1], 0);”)
;; As the above, but MOVS and MOVU.
(define_split [(set (match_operand 0 “register_operand” "") (match_operator 4 “cris_extend_operator” [(match_operand 1 “indirect_operand” "")]))] “reload_completed && REG_P (operands[0]) && GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD && (GET_CODE (XEXP (operands[1], 0)) == MEM || CONSTANT_P (XEXP (operands[1], 0)))” [(set (match_dup 2) (match_dup 5)) (set (match_dup 0) (match_op_dup 4 [(match_dup 3)]))] “operands[2] = gen_rtx_REG (Pmode, REGNO (operands[0])); operands[3] = replace_equiv_address (XEXP (operands[4], 0), operands[2]); operands[5] = XEXP (operands[1], 0);”) ;; Various peephole optimizations. ;; ;; Watch out: when you exchange one set of instructions for another, the ;; condition codes setting must be the same, or you have to CC_INIT or ;; whatever is appropriate, in the pattern before you emit the ;; assembly text. This is best done here, not in cris_notice_update_cc, ;; to keep changes local to their cause. ;; ;; Do not add patterns that you do not know will be matched. ;; Please also add a self-contained testcase.
;; We have trouble with and:s and shifts. Maybe something is broken in ;; gcc? Or it could just be that bit-field insn expansion is a bit ;; suboptimal when not having extzv insns.
(define_peephole [(set (match_operand 0 “register_operand” “=r”) (ashiftrt:SI (match_dup 0) (match_operand:SI 1 “const_int_operand” “n”))) (set (match_dup 0) (and:SI (match_dup 0) (match_operand 2 “const_int_operand” “n”)))] “INTVAL (operands[2]) > 31 && INTVAL (operands[2]) < 255 && INTVAL (operands[1]) > 23”
;; The m flag should be ignored, because this will be a byte “and” ;; operation.
"* { cc_status.flags |= CC_NOT_NEGATIVE;
return "lsrq %1,%0;and.b %2,%0"; }")
(define_peephole [(set (match_operand 0 “register_operand” “=r”) (ashiftrt:SI (match_dup 0) (match_operand:SI 1 “const_int_operand” “n”))) (set (match_dup 0) (and:SI (match_dup 0) (match_operand 2 “const_int_operand” “n”)))] “INTVAL (operands[2]) > 31 && INTVAL (operands[2]) < 65535 && INTVAL (operands[2]) != 255 && INTVAL (operands[1]) > 15”
;; The m flag should be ignored, because this will be a word “and” ;; operation.
"* { cc_status.flags |= CC_NOT_NEGATIVE;
return "lsrq %1,%0;and.w %2,%0"; }")
(define_peephole [(set (match_operand 0 “register_operand” “=r”) (lshiftrt:SI (match_dup 0) (match_operand:SI 1 “const_int_operand” “n”))) (set (match_dup 0) (and:SI (match_dup 0) (match_operand 2 “const_int_operand” “n”)))] “INTVAL (operands[2]) > 31 && INTVAL (operands[2]) < 255 && INTVAL (operands[1]) > 23”
;; The m flag should be ignored, because this will be a byte “and” ;; operation.
"* { cc_status.flags |= CC_NOT_NEGATIVE;
return "lsrq %1,%0;and.b %2,%0"; }")
(define_peephole [(set (match_operand 0 “register_operand” “=r”) (lshiftrt:SI (match_dup 0) (match_operand:SI 1 “const_int_operand” “n”))) (set (match_dup 0) (and:SI (match_dup 0) (match_operand 2 “const_int_operand” “n”)))] “INTVAL (operands[2]) > 31 && INTVAL (operands[2]) < 65535 && INTVAL (operands[2]) != 255 && INTVAL (operands[1]) > 15”
;; The m flag should be ignored, because this will be a word “and” ;; operation.
"* { cc_status.flags |= CC_NOT_NEGATIVE;
return "lsrq %1,%0;and.w %2,%0"; }")
;; Change ;; add.d n,rx ;; move [rx],ry ;; into ;; move [rx=rx+n],ry ;; when -128 <= n <= 127. ;; This will reduce the size of the assembler code for n = [-128..127], ;; and speed up accordingly.
(define_peephole [(set (match_operand:SI 0 “register_operand” “=r”) (plus:SI (match_operand:SI 1 “register_operand” “0”) (match_operand:SI 2 “const_int_operand” “n”))) (set (match_operand 3 “register_operand” “=r”) (mem (match_dup 0)))] “GET_MODE (operands[3]) != DImode && REGNO (operands[3]) != REGNO (operands[0]) && (BASE_P (operands[1]) || BASE_P (operands[2])) && ! CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘J’) && ! CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘N’) && (INTVAL (operands[2]) >= -128 && INTVAL (operands[2]) < 128)” “move.%s3 [%0=%1%S2],%3”)
;; Vice versa: move ry,[rx=rx+n]
(define_peephole [(set (match_operand:SI 0 “register_operand” “=r”) (plus:SI (match_operand:SI 1 “register_operand” “0”) (match_operand:SI 2 “const_int_operand” “n”))) (set (mem (match_dup 0)) (match_operand 3 “register_operand” “=r”))] “GET_MODE (operands[3]) != DImode && REGNO (operands[3]) != REGNO (operands[0]) && (BASE_P (operands[1]) || BASE_P (operands[2])) && ! CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘J’) && ! CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘N’) && (INTVAL (operands[2]) >= -128 && INTVAL (operands[2]) < 128)” “move.%s3 %3,[%0=%1%S2]” [(set_attr “cc” “none”)]) ;; As above, change: ;; add.d n,rx ;; op.d [rx],ry ;; into: ;; op.d [rx=rx+n],ry ;; Saves when n = [-128..127]. ;; ;; Splitting and joining combinations for side-effect modes are slightly ;; out of hand. They probably will not save the time they take typing in, ;; not to mention the bugs that creep in. FIXME: Get rid of as many of ;; the splits and peepholes as possible.
(define_peephole [(set (match_operand:SI 0 “register_operand” “=r”) (plus:SI (match_operand:SI 1 “register_operand” “0”) (match_operand:SI 2 “const_int_operand” “n”))) (set (match_operand 3 “register_operand” “=r”) (match_operator 4 “cris_orthogonal_operator” [(match_dup 3) (mem (match_dup 0))]))] “GET_MODE (operands[3]) != DImode && REGNO (operands[0]) != REGNO (operands[3]) && ! CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘J’) && ! CONST_OK_FOR_LETTER_P (INTVAL (operands[2]), ‘N’) && INTVAL (operands[2]) >= -128 && INTVAL (operands[2]) <= 127” “%x4.%s3 [%0=%1%S2],%3”)
;; Sometimes, for some reason the pattern ;; move x,rx ;; add y,rx ;; move [rx],rz ;; will occur. Solve this, and likewise for to-memory.
(define_peephole [(set (match_operand:SI 0 “register_operand” “=r,r,r,r”) (match_operand:SI 1 “cris_bdap_biap_operand” “r,>Rn,r,>Rn”)) (set (match_dup 0) (plus:SI (match_operand:SI 2 “cris_bdap_biap_operand” “0,0,r>Rn,r”) (match_operand:SI 3 “cris_bdap_biap_operand” “r>Rn,r,0,0”))) (set (match_operand 4 “register_operand” “=r,r,r,r”) (mem (match_dup 0)))] “(rtx_equal_p (operands[2], operands[0]) || rtx_equal_p (operands[3], operands[0])) && cris_side_effect_mode_ok (PLUS, operands, 0, (REG_S_P (operands[1]) ? 1 : (rtx_equal_p (operands[2], operands[0]) ? 3 : 2)), (! REG_S_P (operands[1]) ? 1 : (rtx_equal_p (operands[2], operands[0]) ? 3 : 2)), -1, 4)” “@ move.%s4 [%0=%1%S3],%4 move.%s4 [%0=%3%S1],%4 move.%s4 [%0=%1%S2],%4 move.%s4 [%0=%2%S1],%4”)
;; As above but to memory.
(define_peephole [(set (match_operand:SI 0 “register_operand” “=r,r,r,r”) (match_operand:SI 1 “cris_bdap_biap_operand” “r,>Rn,r,>Rn”)) (set (match_dup 0) (plus:SI (match_operand:SI 2 “cris_bdap_biap_operand” “0,0,r>Rn,r”) (match_operand:SI 3 “cris_bdap_biap_operand” “r>Rn,r,0,0”))) (set (mem (match_dup 0)) (match_operand 4 “register_operand” “=r,r,r,r”))] “(rtx_equal_p (operands[2], operands[0]) || rtx_equal_p (operands[3], operands[0])) && cris_side_effect_mode_ok (PLUS, operands, 0, (REG_S_P (operands[1]) ? 1 : (rtx_equal_p (operands[2], operands[0]) ? 3 : 2)), (! REG_S_P (operands[1]) ? 1 : (rtx_equal_p (operands[2], operands[0]) ? 3 : 2)), -1, 4)” “@ move.%s4 %4,[%0=%1%S3] move.%s4 %4,[%0=%3%S1] move.%s4 %4,[%0=%1%S2] move.%s4 %4,[%0=%2%S1]” [(set_attr “cc” “none”)])
;; As the move from-memory above, but with an operation.
(define_peephole [(set (match_operand:SI 0 “register_operand” “=r,r,r,r”) (match_operand:SI 1 “cris_bdap_biap_operand” “r,>Rn,r,>Rn”)) (set (match_dup 0) (plus:SI (match_operand:SI 2 “cris_bdap_biap_operand” “0,0,r>Rn,r”) (match_operand:SI 3 “cris_bdap_biap_operand” “r>Rn,r,0,0”))) (set (match_operand 4 “register_operand” “=r,r,r,r”) (match_operator 5 “cris_orthogonal_operator” [(match_dup 3) (mem (match_dup 0))]))] “(rtx_equal_p (operands[2], operands[0]) || rtx_equal_p (operands[3], operands[0])) && cris_side_effect_mode_ok (PLUS, operands, 0, (REG_S_P (operands[1]) ? 1 : (rtx_equal_p (operands[2], operands[0]) ? 3 : 2)), (! REG_S_P (operands[1]) ? 1 : (rtx_equal_p (operands[2], operands[0]) ? 3 : 2)), -1, 4)” “@ %x5.%s4 [%0=%1%S3],%4 %x5.%s4 [%0=%3%S1],%4 %x5.%s4 [%0=%1%S2],%4 %x5.%s4 [%0=%2%S1],%4”)
;; Same, but with swapped operands (and commutative operation).
(define_peephole [(set (match_operand:SI 0 “register_operand” “=r,r,r,r”) (match_operand:SI 1 “cris_bdap_biap_operand” “r,>Rn,r,>Rn”)) (set (match_dup 0) (plus:SI (match_operand:SI 2 “cris_bdap_biap_operand” “0,0,r>Rn,r”) (match_operand:SI 3 “cris_bdap_biap_operand” “r>Rn,r,0,0”))) (set (match_operand 4 “register_operand” “=r,r,r,r”) (match_operator 5 “cris_commutative_orth_op” [(mem (match_dup 0)) (match_dup 3)]))] “(rtx_equal_p (operands[2], operands[0]) || rtx_equal_p (operands[3], operands[0])) && cris_side_effect_mode_ok (PLUS, operands, 0, (REG_S_P (operands[1]) ? 1 : (rtx_equal_p (operands[2], operands[0]) ? 3 : 2)), (! REG_S_P (operands[1]) ? 1 : (rtx_equal_p (operands[2], operands[0]) ? 3 : 2)), -1, 4)” “@ %x5.%s4 [%0=%1%S3],%4 %x5.%s4 [%0=%3%S1],%4 %x5.%s4 [%0=%1%S2],%4 %x5.%s4 [%0=%2%S1],%4”)
;; Another spotted bad code: ;; move rx,ry ;; move [ry],ry
(define_peephole [(set (match_operand:SI 0 “register_operand” “=r”) (match_operand:SI 1 “register_operand” “r”)) (set (match_operand 2 “register_operand” “=r”) (mem (match_dup 0)))] “REGNO (operands[0]) == REGNO (operands[2]) && GET_MODE_SIZE (GET_MODE (operands[2])) <= UNITS_PER_WORD” “move.%s2 [%1],%0” [(set_attr “slottable” “yes”)])
;; And a simple variant with extended operand.
(define_peephole [(set (match_operand:SI 0 “register_operand” “=r”) (match_operand:SI 1 “register_operand” “r”)) (set (match_operand 2 “register_operand” “=r”) (match_operator 3 “cris_extend_operator” [(mem (match_dup 0))]))] “REGNO (operands[0]) == REGNO (operands[2]) && GET_MODE_SIZE (GET_MODE (operands[2])) <= UNITS_PER_WORD” “mov%e3.%m3 [%1],%0” [(set_attr “slottable” “yes”)]) ;; Here are all peepholes that have a saved testcase. ;; Do not add new peepholes without testcases.
;; peep-1: ;; move.d [r10+16],r9 ;; and.d r12,r9 ;; change to ;; and.d [r10+16],r12,r9 ;; With generalization of the operation, the size and the addressing mode. ;; This seems to be the result of a quirk in register allocation ;; missing the three-operand cases when having different predicates. ;; Maybe that it matters that it is a commutative operation. ;; This pattern helps that situation, but there‘s still the increased ;; register pressure. ;; Note that adding the noncommutative variant did not show any matches ;; in ipps and cc1, so it’s not here.
(define_peephole [(set (match_operand 0 “register_operand” “=r,r,r,r”) (mem (plus:SI (match_operand:SI 1 “cris_bdap_biap_operand” “r,r>Rn,r,r>Rn”) (match_operand:SI 2 “cris_bdap_biap_operand” “r>Rn,r,r>Rn,r”)))) (set (match_dup 0) (match_operator 5 “cris_commutative_orth_op” [(match_operand 3 “register_operand” “0,0,r,r”) (match_operand 4 “register_operand” “r,r,0,0”)]))] “(rtx_equal_p (operands[3], operands[0]) || rtx_equal_p (operands[4], operands[0])) && ! rtx_equal_p (operands[3], operands[4]) && (REG_S_P (operands[1]) || REG_S_P (operands[2])) && GET_MODE_SIZE (GET_MODE (operands[0])) <= UNITS_PER_WORD” “@ %x5.%s0 [%1%S2],%4,%0 %x5.%s0 [%2%S1],%4,%0 %x5.%s0 [%1%S2],%3,%0 %x5.%s0 [%2%S1],%3,%0”)
;; peep-2: ;; I cannot tell GCC (2.1, 2.7.2) how to correctly reload an instruction ;; that looks like ;; and.b some_byte,const,reg_32 ;; where reg_32 is the destination of the “three-address” code optimally. ;; It should be: ;; movu.b some_byte,reg_32 ;; and.b const,reg_32 ;; but is turns into: ;; move.b some_byte,reg_32 ;; and.d const,reg_32 ;; Fix it here.
(define_peephole [(set (match_operand:SI 0 “register_operand” “=r”) (match_operand:SI 1 “nonimmediate_operand” “rm”)) (set (match_operand:SI 2 “register_operand” “=0”) (and:SI (match_dup 0) (match_operand:SI 3 “const_int_operand” “n”)))]
;; Since the size of the memory access could be made different here, ;; don't do this for a mem-volatile access.
“REGNO (operands[2]) == REGNO (operands[0]) && INTVAL (operands[3]) <= 65535 && INTVAL (operands[3]) >= 0 && ! CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘I’) && (GET_CODE (operands[1]) != MEM || ! MEM_VOLATILE_P (operands[1]))” "* { if (CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘O’)) return "movu.%z3 %1,%0;andq %b3,%0";
cc_status.flags |= CC_NOT_NEGATIVE;
return "movu.%z3 %1,%0;and.%z3 %3,%0"; }")
;; peep-3
(define_peephole [(set (match_operand 0 “register_operand” “=r”) (match_operand 1 “nonimmediate_operand” “rm”)) (set (match_operand:SI 2 “register_operand” “=r”) (and:SI (subreg:SI (match_dup 0) 0) (match_operand 3 “const_int_operand” “n”)))]
;; Since the size of the memory access could be made different here, ;; don't do this for a mem-volatile access.
“REGNO (operands[0]) == REGNO (operands[2]) && INTVAL (operands[3]) > 0 && INTVAL (operands[3]) <= 65535 && ! CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘I’) && (GET_CODE (operands[1]) != MEM || ! MEM_VOLATILE_P (operands[1]))” "* { if (CONST_OK_FOR_LETTER_P (INTVAL (operands[3]), ‘O’)) return "movu.%z3 %1,%0;andq %b3,%0";
cc_status.flags |= CC_NOT_NEGATIVE;
return "movu.%z3 %1,%0;and.%z3 %3,%0"; }") ;; Local variables: ;; mode:emacs-lisp ;; comment-start: ";; " ;; eval: (set-syntax-table (copy-sequence (syntax-table))) ;; eval: (modify-syntax-entry ?[ “(]”) ;; eval: (modify-syntax-entry ?] “)[”) ;; eval: (modify-syntax-entry ?{ “(}”) ;; eval: (modify-syntax-entry ?} “){”) ;; eval: (setq indent-tabs-mode t) ;; End: