Google Git
Sign in
gnu / gcc / 19220ca6aa79921cc431e41f25986e16410c7a6a / . / gcc / config / i860 / i860.c
blob: 9946f261c7c288367bf9774bd2c3d72612f28bea [file] [log] [blame]
/* Subroutines for insn-output.c for Intel i860
Copyright (C) 1989, 1991, 1997, 1998, 1999, 2000, 2001, 2002, 2003
Free Software Foundation, Inc.
Derived from sparc.c.
Written by Richard Stallman (rms@ai.mit.edu).
Hacked substantially by Ron Guilmette (rfg@netcom.com) to cater
to the whims of the System V Release 4 assembler.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GCC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING. If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA. */
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "flags.h"
#include "rtl.h"
#include "tree.h"
#include "regs.h"
#include "hard-reg-set.h"
#include "real.h"
#include "insn-config.h"
#include "conditions.h"
#include "output.h"
#include "recog.h"
#include "insn-attr.h"
#include "function.h"
#include "expr.h"
#include "optabs.h"
#include "toplev.h"
#include "tm_p.h"
#include "target.h"
#include "target-def.h"
#include "langhooks.h"
static rtx find_addr_reg (rtx);
#ifndef I860_REG_PREFIX
#define I860_REG_PREFIX ""
#endif
const char *i860_reg_prefix = I860_REG_PREFIX;
/* Save information from a "cmpxx" operation until the branch is emitted. */
rtx i860_compare_op0, i860_compare_op1;
/* Return nonzero if this pattern, can be evaluated safely, even if it
was not asked for. */
int
safe_insn_src_p (rtx op, enum machine_mode mode)
{
/* Just experimenting. */
/* No floating point source is safe if it contains an arithmetic
operation, since that operation may trap. */
switch (GET_CODE (op))
{
case CONST_INT:
case LABEL_REF:
case SYMBOL_REF:
case CONST:
return 1;
case REG:
return 1;
case MEM:
return CONSTANT_ADDRESS_P (XEXP (op, 0));
/* We never need to negate or complement constants. */
case NEG:
return (mode != SFmode && mode != DFmode);
case NOT:
case ZERO_EXTEND:
return 1;
case EQ:
case NE:
case LT:
case GT:
case LE:
case GE:
case LTU:
case GTU:
case LEU:
case GEU:
case MINUS:
case PLUS:
return (mode != SFmode && mode != DFmode);
case AND:
case IOR:
case XOR:
case ASHIFT:
case ASHIFTRT:
case LSHIFTRT:
if ((GET_CODE (XEXP (op, 0)) == CONST_INT && ! SMALL_INT (XEXP (op, 0)))
|| (GET_CODE (XEXP (op, 1)) == CONST_INT && ! SMALL_INT (XEXP (op, 1))))
return 0;
return 1;
default:
return 0;
}
}
/* Return 1 if REG is clobbered in IN.
Return 2 if REG is used in IN.
Return 3 if REG is both used and clobbered in IN.
Return 0 if none of the above. */
static int
reg_clobbered_p (rtx reg, rtx in)
{
register enum rtx_code code;
if (in == 0)
return 0;
code = GET_CODE (in);
if (code == SET || code == CLOBBER)
{
rtx dest = SET_DEST (in);
int set = 0;
int used = 0;
while (GET_CODE (dest) == STRICT_LOW_PART
|| GET_CODE (dest) == SUBREG
|| GET_CODE (dest) == SIGN_EXTRACT
|| GET_CODE (dest) == ZERO_EXTRACT)
dest = XEXP (dest, 0);
if (dest == reg)
set = 1;
else if (GET_CODE (dest) == REG
&& refers_to_regno_p (REGNO (reg),
REGNO (reg) + HARD_REGNO_NREGS (reg, GET_MODE (reg)),
SET_DEST (in), 0))
{
set = 1;
/* Anything that sets just part of the register
is considered using as well as setting it.
But note that a straight SUBREG of a single-word value
clobbers the entire value. */
if (dest != SET_DEST (in)
&& ! (GET_CODE (SET_DEST (in)) == SUBREG
|| UNITS_PER_WORD >= GET_MODE_SIZE (GET_MODE (dest))))
used = 1;
}
if (code == SET)
{
if (set)
used = refers_to_regno_p (REGNO (reg),
REGNO (reg) + HARD_REGNO_NREGS (reg, GET_MODE (reg)),
SET_SRC (in), 0);
else
used = refers_to_regno_p (REGNO (reg),
REGNO (reg) + HARD_REGNO_NREGS (reg, GET_MODE (reg)),
in, 0);
}
return set + used * 2;
}
if (refers_to_regno_p (REGNO (reg),
REGNO (reg) + HARD_REGNO_NREGS (reg, GET_MODE (reg)),
in, 0))
return 2;
return 0;
}
/* Return nonzero if OP can be written to without screwing up
GCC's model of what's going on. It is assumed that this operand
appears in the dest position of a SET insn in a conditional
branch's delay slot. AFTER is the label to start looking from. */
int
operand_clobbered_before_used_after (rtx op, rtx after)
{
/* Just experimenting. */
if (GET_CODE (op) == CC0)
return 1;
if (GET_CODE (op) == REG)
{
rtx insn;
if (op == stack_pointer_rtx)
return 0;
/* Scan forward from the label, to see if the value of OP
is clobbered before the first use. */
for (insn = NEXT_INSN (after); insn; insn = NEXT_INSN (insn))
{
if (GET_CODE (insn) == NOTE)
continue;
if (GET_CODE (insn) == INSN
|| GET_CODE (insn) == JUMP_INSN
|| GET_CODE (insn) == CALL_INSN)
{
switch (reg_clobbered_p (op, PATTERN (insn)))
{
default:
return 0;
case 1:
return 1;
case 0:
break;
}
}
/* If we reach another label without clobbering OP,
then we cannot safely write it here. */
else if (GET_CODE (insn) == CODE_LABEL)
return 0;
if (GET_CODE (insn) == JUMP_INSN)
{
if (condjump_p (insn))
return 0;
/* This is a jump insn which has already
been mangled. We can't tell what it does. */
if (GET_CODE (PATTERN (insn)) == PARALLEL)
return 0;
if (! JUMP_LABEL (insn))
return 0;
/* Keep following jumps. */
insn = JUMP_LABEL (insn);
}
}
return 1;
}
/* In both of these cases, the first insn executed
for this op will be a orh whatever%h,%r0,%r31,
which is tolerable. */
if (GET_CODE (op) == MEM)
return (CONSTANT_ADDRESS_P (XEXP (op, 0)));
return 0;
}
/* Return nonzero only if OP is a register of mode MODE,
or const0_rtx. */
int
reg_or_0_operand (rtx op, enum machine_mode mode)
{
return (op == const0_rtx || register_operand (op, mode)
|| op == CONST0_RTX (mode));
}
/* Return truth value of whether OP can be used as an operands in a three
address add/subtract insn (such as add %o1,7,%l2) of mode MODE. */
int
arith_operand (rtx op, enum machine_mode mode)
{
return (register_operand (op, mode)
|| (GET_CODE (op) == CONST_INT && SMALL_INT (op)));
}
/* Return 1 if OP is a valid first operand for a logical insn of mode MODE. */
int
logic_operand (rtx op, enum machine_mode mode)
{
return (register_operand (op, mode)
|| (GET_CODE (op) == CONST_INT && LOGIC_INT (op)));
}
/* Return 1 if OP is a valid first operand for a shift insn of mode MODE. */
int
shift_operand (rtx op, enum machine_mode mode)
{
return (register_operand (op, mode)
|| (GET_CODE (op) == CONST_INT));
}
/* Return 1 if OP is a valid first operand for either a logical insn
or an add insn of mode MODE. */
int
compare_operand (rtx op, enum machine_mode mode)
{
return (register_operand (op, mode)
|| (GET_CODE (op) == CONST_INT && SMALL_INT (op) && LOGIC_INT (op)));
}
/* Return truth value of whether OP can be used as the 5-bit immediate
operand of a bte or btne insn. */
int
bte_operand (rtx op, enum machine_mode mode)
{
return (register_operand (op, mode)
|| (GET_CODE (op) == CONST_INT
&& (unsigned) INTVAL (op) < 0x20));
}
/* Return 1 if OP is an indexed memory reference of mode MODE. */
int
indexed_operand (rtx op, enum machine_mode mode)
{
return (GET_CODE (op) == MEM && GET_MODE (op) == mode
&& GET_CODE (XEXP (op, 0)) == PLUS
&& GET_MODE (XEXP (op, 0)) == SImode
&& register_operand (XEXP (XEXP (op, 0), 0), SImode)
&& register_operand (XEXP (XEXP (op, 0), 1), SImode));
}
/* Return 1 if OP is a suitable source operand for a load insn
with mode MODE. */
int
load_operand (rtx op, enum machine_mode mode)
{
return (memory_operand (op, mode) || indexed_operand (op, mode));
}
/* Return truth value of whether OP is an integer which fits the
range constraining immediate operands in add/subtract insns. */
int
small_int (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
{
return (GET_CODE (op) == CONST_INT && SMALL_INT (op));
}
/* Return truth value of whether OP is an integer which fits the
range constraining immediate operands in logic insns. */
int
logic_int (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
{
return (GET_CODE (op) == CONST_INT && LOGIC_INT (op));
}
/* Test for a valid operand for a call instruction.
Don't allow the arg pointer register or virtual regs
since they may change into reg + const, which the patterns
can't handle yet. */
int
call_insn_operand (rtx op, enum machine_mode mode ATTRIBUTE_UNUSED)
{
if (GET_CODE (op) == MEM
&& (CONSTANT_ADDRESS_P (XEXP (op, 0))
|| (GET_CODE (XEXP (op, 0)) == REG
&& XEXP (op, 0) != arg_pointer_rtx
&& !(REGNO (XEXP (op, 0)) >= FIRST_PSEUDO_REGISTER
&& REGNO (XEXP (op, 0)) <= LAST_VIRTUAL_REGISTER))))
return 1;
return 0;
}
/* Return the best assembler insn template
for moving operands[1] into operands[0] as a fullword. */
static const char *
singlemove_string (rtx *operands)
{
if (GET_CODE (operands[0]) == MEM)
{
if (GET_CODE (operands[1]) != MEM)
if (CONSTANT_ADDRESS_P (XEXP (operands[0], 0)))
{
if (! ((cc_prev_status.flags & CC_KNOW_HI_R31)
&& (cc_prev_status.flags & CC_HI_R31_ADJ)
&& cc_prev_status.mdep == XEXP (operands[0], 0)))
{
CC_STATUS_INIT;
output_asm_insn ("orh %h0,%?r0,%?r31", operands);
}
cc_status.flags |= CC_KNOW_HI_R31 | CC_HI_R31_ADJ;
cc_status.mdep = XEXP (operands[0], 0);
return "st.l %r1,%L0(%?r31)";
}
else
return "st.l %r1,%0";
else
abort ();
#if 0
{
rtx xoperands[2];
cc_status.flags &= ~CC_F0_IS_0;
xoperands[0] = gen_rtx_REG (SFmode, 32);
xoperands[1] = operands[1];
output_asm_insn (singlemove_string (xoperands), xoperands);
xoperands[1] = xoperands[0];
xoperands[0] = operands[0];
output_asm_insn (singlemove_string (xoperands), xoperands);
return "";
}
#endif
}
if (GET_CODE (operands[1]) == MEM)
{
if (CONSTANT_ADDRESS_P (XEXP (operands[1], 0)))
{
if (! ((cc_prev_status.flags & CC_KNOW_HI_R31)
&& (cc_prev_status.flags & CC_HI_R31_ADJ)
&& cc_prev_status.mdep == XEXP (operands[1], 0)))
{
CC_STATUS_INIT;
output_asm_insn ("orh %h1,%?r0,%?r31", operands);
}
cc_status.flags |= CC_KNOW_HI_R31 | CC_HI_R31_ADJ;
cc_status.mdep = XEXP (operands[1], 0);
return "ld.l %L1(%?r31),%0";
}
return "ld.l %m1,%0";
}
if (GET_CODE (operands[1]) == CONST_INT)
{
if (operands[1] == const0_rtx)
return "mov %?r0,%0";
if((INTVAL (operands[1]) & 0xffff0000) == 0)
return "or %L1,%?r0,%0";
if((INTVAL (operands[1]) & 0xffff8000) == 0xffff8000)
return "adds %1,%?r0,%0";
if((INTVAL (operands[1]) & 0x0000ffff) == 0)
return "orh %H1,%?r0,%0";
return "orh %H1,%?r0,%0\n\tor %L1,%0,%0";
}
return "mov %1,%0";
}
/* Output assembler code to perform a doubleword move insn
with operands OPERANDS. */
const char *
output_move_double (rtx *operands)
{
enum { REGOP, OFFSOP, MEMOP, PUSHOP, POPOP, CNSTOP, RNDOP } optype0, optype1;
rtx latehalf[2];
rtx addreg0 = 0, addreg1 = 0;
int highest_first = 0;
int no_addreg1_decrement = 0;
/* First classify both operands. */
if (REG_P (operands[0]))
optype0 = REGOP;
else if (offsettable_memref_p (operands[0]))
optype0 = OFFSOP;
else if (GET_CODE (operands[0]) == MEM)
optype0 = MEMOP;
else
optype0 = RNDOP;
if (REG_P (operands[1]))
optype1 = REGOP;
else if (CONSTANT_P (operands[1]))
optype1 = CNSTOP;
else if (offsettable_memref_p (operands[1]))
optype1 = OFFSOP;
else if (GET_CODE (operands[1]) == MEM)
optype1 = MEMOP;
else
optype1 = RNDOP;
/* Check for the cases that the operand constraints are not
supposed to allow to happen. Abort if we get one,
because generating code for these cases is painful. */
if (optype0 == RNDOP || optype1 == RNDOP)
abort ();
/* If an operand is an unoffsettable memory reference, find a register
we can increment temporarily to make it refer to the second word. */
if (optype0 == MEMOP)
addreg0 = find_addr_reg (XEXP (operands[0], 0));
if (optype1 == MEMOP)
addreg1 = find_addr_reg (XEXP (operands[1], 0));
/* ??? Perhaps in some cases move double words
if there is a spare pair of floating regs. */
/* Ok, we can do one word at a time.
Normally we do the low-numbered word first,
but if either operand is autodecrementing then we
do the high-numbered word first.
In either case, set up in LATEHALF the operands to use
for the high-numbered word and in some cases alter the
operands in OPERANDS to be suitable for the low-numbered word. */
if (optype0 == REGOP)
latehalf[0] = gen_rtx_REG (SImode, REGNO (operands[0]) + 1);
else if (optype0 == OFFSOP)
latehalf[0] = adjust_address (operands[0], SImode, 4);
else
latehalf[0] = operands[0];
if (optype1 == REGOP)
latehalf[1] = gen_rtx_REG (SImode, REGNO (operands[1]) + 1);
else if (optype1 == OFFSOP)
latehalf[1] = adjust_address (operands[1], SImode, 4);
else if (optype1 == CNSTOP)
{
if (GET_CODE (operands[1]) == CONST_DOUBLE)
split_double (operands[1], &operands[1], &latehalf[1]);
#if 0
else if (CONSTANT_P (operands[1]))
latehalf[1] = const0_rtx;
#else
else if (CONSTANT_P (operands[1]))
split_double (operands[1], &operands[1], &latehalf[1]);
#endif
}
else
latehalf[1] = operands[1];
/* If the first move would clobber the source of the second one,
do them in the other order.
RMS says "This happens only for registers;
such overlap can't happen in memory unless the user explicitly
sets it up, and that is an undefined circumstance."
But it happens on the sparc when loading parameter registers,
so I am going to define that circumstance, and make it work
as expected. */
if (optype0 == REGOP && optype1 == REGOP
&& REGNO (operands[0]) == REGNO (latehalf[1]))
{
CC_STATUS_PARTIAL_INIT;
/* Make any unoffsettable addresses point at high-numbered word. */
if (addreg0)
output_asm_insn ("adds 0x4,%0,%0", &addreg0);
if (addreg1)
output_asm_insn ("adds 0x4,%0,%0", &addreg1);
/* Do that word. */
output_asm_insn (singlemove_string (latehalf), latehalf);
/* Undo the adds we just did. */
if (addreg0)
output_asm_insn ("adds -0x4,%0,%0", &addreg0);
if (addreg1)
output_asm_insn ("adds -0x4,%0,%0", &addreg1);
/* Do low-numbered word. */
return singlemove_string (operands);
}
else if (optype0 == REGOP && optype1 != REGOP
&& reg_overlap_mentioned_p (operands[0], operands[1]))
{
/* If both halves of dest are used in the src memory address,
add the two regs and put them in the low reg (operands[0]).
Then it works to load latehalf first. */
if (reg_mentioned_p (operands[0], XEXP (operands[1], 0))
&& reg_mentioned_p (latehalf[0], XEXP (operands[1], 0)))
{
rtx xops[2];
xops[0] = latehalf[0];
xops[1] = operands[0];
output_asm_insn ("adds %1,%0,%1", xops);
operands[1] = gen_rtx_MEM (DImode, operands[0]);
latehalf[1] = adjust_address (operands[1], SImode, 4);
addreg1 = 0;
highest_first = 1;
}
/* Only one register in the dest is used in the src memory address,
and this is the first register of the dest, so we want to do
the late half first here also. */
else if (! reg_mentioned_p (latehalf[0], XEXP (operands[1], 0)))
highest_first = 1;
/* Only one register in the dest is used in the src memory address,
and this is the second register of the dest, so we want to do
the late half last. If addreg1 is set, and addreg1 is the same
register as latehalf, then we must suppress the trailing decrement,
because it would clobber the value just loaded. */
else if (addreg1 && reg_mentioned_p (addreg1, latehalf[0]))
no_addreg1_decrement = 1;
}
/* Normal case: do the two words, low-numbered first.
Overlap case (highest_first set): do high-numbered word first. */
if (! highest_first)
output_asm_insn (singlemove_string (operands), operands);
CC_STATUS_PARTIAL_INIT;
/* Make any unoffsettable addresses point at high-numbered word. */
if (addreg0)
output_asm_insn ("adds 0x4,%0,%0", &addreg0);
if (addreg1)
output_asm_insn ("adds 0x4,%0,%0", &addreg1);
/* Do that word. */
output_asm_insn (singlemove_string (latehalf), latehalf);
/* Undo the adds we just did. */
if (addreg0)
output_asm_insn ("adds -0x4,%0,%0", &addreg0);
if (addreg1 && !no_addreg1_decrement)
output_asm_insn ("adds -0x4,%0,%0", &addreg1);
if (highest_first)
output_asm_insn (singlemove_string (operands), operands);
return "";
}
const char *
output_fp_move_double (rtx *operands)
{
/* If the source operand is any sort of zero, use f0 instead. */
if (operands[1] == CONST0_RTX (GET_MODE (operands[1])))
operands[1] = gen_rtx_REG (DFmode, F0_REGNUM);
if (FP_REG_P (operands[0]))
{
if (FP_REG_P (operands[1]))
return "fmov.dd %1,%0";
if (GET_CODE (operands[1]) == REG)
{
output_asm_insn ("ixfr %1,%0", operands);
operands[0] = gen_rtx_REG (VOIDmode, REGNO (operands[0]) + 1);
operands[1] = gen_rtx_REG (VOIDmode, REGNO (operands[1]) + 1);
return "ixfr %1,%0";
}
if (operands[1] == CONST0_RTX (DFmode))
return "fmov.dd f0,%0";
if (CONSTANT_ADDRESS_P (XEXP (operands[1], 0)))
{
if (! ((cc_prev_status.flags & CC_KNOW_HI_R31)
&& (cc_prev_status.flags & CC_HI_R31_ADJ)
&& cc_prev_status.mdep == XEXP (operands[1], 0)))
{
CC_STATUS_INIT;
output_asm_insn ("orh %h1,%?r0,%?r31", operands);
}
cc_status.flags |= CC_KNOW_HI_R31 | CC_HI_R31_ADJ;
cc_status.mdep = XEXP (operands[1], 0);
return "fld.d %L1(%?r31),%0";
}
return "fld.d %1,%0";
}
else if (FP_REG_P (operands[1]))
{
if (GET_CODE (operands[0]) == REG)
{
output_asm_insn ("fxfr %1,%0", operands);
operands[0] = gen_rtx_REG (VOIDmode, REGNO (operands[0]) + 1);
operands[1] = gen_rtx_REG (VOIDmode, REGNO (operands[1]) + 1);
return "fxfr %1,%0";
}
if (CONSTANT_ADDRESS_P (XEXP (operands[0], 0)))
{
if (! ((cc_prev_status.flags & CC_KNOW_HI_R31)
&& (cc_prev_status.flags & CC_HI_R31_ADJ)
&& cc_prev_status.mdep == XEXP (operands[0], 0)))
{
CC_STATUS_INIT;
output_asm_insn ("orh %h0,%?r0,%?r31", operands);
}
cc_status.flags |= CC_KNOW_HI_R31 | CC_HI_R31_ADJ;
cc_status.mdep = XEXP (operands[0], 0);
return "fst.d %1,%L0(%?r31)";
}
return "fst.d %1,%0";
}
else
abort ();
/* NOTREACHED */
return NULL;
}
/* Return a REG that occurs in ADDR with coefficient 1.
ADDR can be effectively incremented by incrementing REG. */
static rtx
find_addr_reg (rtx addr)
{
while (GET_CODE (addr) == PLUS)
{
if (GET_CODE (XEXP (addr, 0)) == REG)
addr = XEXP (addr, 0);
else if (GET_CODE (XEXP (addr, 1)) == REG)
addr = XEXP (addr, 1);
else if (CONSTANT_P (XEXP (addr, 0)))
addr = XEXP (addr, 1);
else if (CONSTANT_P (XEXP (addr, 1)))
addr = XEXP (addr, 0);
else
abort ();
}
if (GET_CODE (addr) == REG)
return addr;
abort ();
/* NOTREACHED */
return NULL;
}
/* Return a template for a load instruction with mode MODE and
arguments from the string ARGS.
This string is in static storage. */
static const char *
load_opcode (enum machine_mode mode, const char *args, rtx reg)
{
static char buf[30];
const char *opcode;
switch (mode)
{
case QImode:
opcode = "ld.b";
break;
case HImode:
opcode = "ld.s";
break;
case SImode:
case SFmode:
if (FP_REG_P (reg))
opcode = "fld.l";
else
opcode = "ld.l";
break;
case DImode:
if (!FP_REG_P (reg))
abort ();
case DFmode:
opcode = "fld.d";
break;
default:
abort ();
}
sprintf (buf, "%s %s", opcode, args);
return buf;
}
/* Return a template for a store instruction with mode MODE and
arguments from the string ARGS.
This string is in static storage. */
static const char *
store_opcode (enum machine_mode mode, const char *args, rtx reg)
{
static char buf[30];
const char *opcode;
switch (mode)
{
case QImode:
opcode = "st.b";
break;
case HImode:
opcode = "st.s";
break;
case SImode:
case SFmode:
if (FP_REG_P (reg))
opcode = "fst.l";
else
opcode = "st.l";
break;
case DImode:
if (!FP_REG_P (reg))
abort ();
case DFmode:
opcode = "fst.d";
break;
default:
abort ();
}
sprintf (buf, "%s %s", opcode, args);
return buf;
}
/* Output a store-in-memory whose operands are OPERANDS[0,1].
OPERANDS[0] is a MEM, and OPERANDS[1] is a reg or zero.
This function returns a template for an insn.
This is in static storage.
It may also output some insns directly.
It may alter the values of operands[0] and operands[1]. */
const char *
output_store (rtx *operands)
{
enum machine_mode mode = GET_MODE (operands[0]);
rtx address = XEXP (operands[0], 0);
cc_status.flags |= CC_KNOW_HI_R31 | CC_HI_R31_ADJ;
cc_status.mdep = address;
if (! ((cc_prev_status.flags & CC_KNOW_HI_R31)
&& (cc_prev_status.flags & CC_HI_R31_ADJ)
&& address == cc_prev_status.mdep))
{
CC_STATUS_INIT;
output_asm_insn ("orh %h0,%?r0,%?r31", operands);
cc_prev_status.mdep = address;
}
/* Store zero in two parts when appropriate. */
if (mode == DFmode && operands[1] == CONST0_RTX (DFmode))
return store_opcode (DFmode, "%r1,%L0(%?r31)", operands[1]);
/* Code below isn't smart enough to move a doubleword in two parts,
so use output_move_double to do that in the cases that require it. */
if ((mode == DImode || mode == DFmode)
&& ! FP_REG_P (operands[1]))
return output_move_double (operands);
return store_opcode (mode, "%r1,%L0(%?r31)", operands[1]);
}
/* Output a load-from-memory whose operands are OPERANDS[0,1].
OPERANDS[0] is a reg, and OPERANDS[1] is a mem.
This function returns a template for an insn.
This is in static storage.
It may also output some insns directly.
It may alter the values of operands[0] and operands[1]. */
const char *
output_load (rtx *operands)
{
enum machine_mode mode = GET_MODE (operands[0]);
rtx address = XEXP (operands[1], 0);
/* We don't bother trying to see if we know %hi(address).
This is because we are doing a load, and if we know the
%hi value, we probably also know that value in memory. */
cc_status.flags |= CC_KNOW_HI_R31 | CC_HI_R31_ADJ;
cc_status.mdep = address;
if (! ((cc_prev_status.flags & CC_KNOW_HI_R31)
&& (cc_prev_status.flags & CC_HI_R31_ADJ)
&& address == cc_prev_status.mdep
&& cc_prev_status.mdep == cc_status.mdep))
{
CC_STATUS_INIT;
output_asm_insn ("orh %h1,%?r0,%?r31", operands);
cc_prev_status.mdep = address;
}
/* Code below isn't smart enough to move a doubleword in two parts,
so use output_move_double to do that in the cases that require it. */
if ((mode == DImode || mode == DFmode)
&& ! FP_REG_P (operands[0]))
return output_move_double (operands);
return load_opcode (mode, "%L1(%?r31),%0", operands[0]);
}
#if 0
/* Load the address specified by OPERANDS[3] into the register
specified by OPERANDS[0].
OPERANDS[3] may be the result of a sum, hence it could either be:
(1) CONST
(2) REG
(2) REG + CONST_INT
(3) REG + REG + CONST_INT
(4) REG + REG (special case of 3).
Note that (3) is not a legitimate address.
All cases are handled here. */
void
output_load_address (rtx *operands)
{
rtx base, offset;
if (CONSTANT_P (operands[3]))
{
output_asm_insn ("mov %3,%0", operands);
return;
}
if (REG_P (operands[3]))
{
if (REGNO (operands[0]) != REGNO (operands[3]))
output_asm_insn ("shl %?r0,%3,%0", operands);
return;
}
if (GET_CODE (operands[3]) != PLUS)
abort ();
base = XEXP (operands[3], 0);
offset = XEXP (operands[3], 1);
if (GET_CODE (base) == CONST_INT)
{
rtx tmp = base;
base = offset;
offset = tmp;
}
if (GET_CODE (offset) != CONST_INT)
{
/* Operand is (PLUS (REG) (REG)). */
base = operands[3];
offset = const0_rtx;
}
if (REG_P (base))
{
operands[6] = base;
operands[7] = offset;
CC_STATUS_PARTIAL_INIT;
if (SMALL_INT (offset))
output_asm_insn ("adds %7,%6,%0", operands);
else
output_asm_insn ("mov %7,%0\n\tadds %0,%6,%0", operands);
}
else if (GET_CODE (base) == PLUS)
{
operands[6] = XEXP (base, 0);
operands[7] = XEXP (base, 1);
operands[8] = offset;
CC_STATUS_PARTIAL_INIT;
if (SMALL_INT (offset))
output_asm_insn ("adds %6,%7,%0\n\tadds %8,%0,%0", operands);
else
output_asm_insn ("mov %8,%0\n\tadds %0,%6,%0\n\tadds %0,%7,%0", operands);
}
else
abort ();
}
#endif
/* Output code to place a size count SIZE in register REG.
Because block moves are pipelined, we don't include the
first element in the transfer of SIZE to REG.
For this, we subtract ALIGN. (Actually, I think it is not
right to subtract on this machine, so right now we don't.) */
static void
output_size_for_block_move (rtx size, rtx reg, rtx align)
{
rtx xoperands[3];
xoperands[0] = reg;
xoperands[1] = size;
xoperands[2] = align;
#if 1
cc_status.flags &= ~ CC_KNOW_HI_R31;
output_asm_insn (singlemove_string (xoperands), xoperands);
#else
if (GET_CODE (size) == REG)
output_asm_insn ("sub %2,%1,%0", xoperands);
else
{
xoperands[1] = GEN_INT (INTVAL (size) - INTVAL (align));
cc_status.flags &= ~ CC_KNOW_HI_R31;
output_asm_insn ("mov %1,%0", xoperands);
}
#endif
}
/* Emit code to perform a block move.
OPERANDS[0] is the destination.
OPERANDS[1] is the source.
OPERANDS[2] is the size.
OPERANDS[3] is the known safe alignment.
OPERANDS[4..6] are pseudos we can safely clobber as temps. */
const char *
output_block_move (rtx *operands)
{
/* A vector for our computed operands. Note that load_output_address
makes use of (and can clobber) up to the 8th element of this vector. */
rtx xoperands[10];
#if 0
rtx zoperands[10];
#endif
static int movstrsi_label = 0;
int i;
rtx temp1 = operands[4];
rtx alignrtx = operands[3];
int align = INTVAL (alignrtx);
int chunk_size;
xoperands[0] = operands[0];
xoperands[1] = operands[1];
xoperands[2] = temp1;
/* We can't move more than four bytes at a time
because we have only one register to move them through. */
if (align > 4)
{
align = 4;
alignrtx = GEN_INT (4);
}
/* Recognize special cases of block moves. These occur
when GNU C++ is forced to treat something as BLKmode
to keep it in memory, when its mode could be represented
with something smaller.
We cannot do this for global variables, since we don't know
what pages they don't cross. Sigh. */
if (GET_CODE (operands[2]) == CONST_INT
&& ! CONSTANT_ADDRESS_P (operands[0])
&& ! CONSTANT_ADDRESS_P (operands[1]))
{
int size = INTVAL (operands[2]);
rtx op0 = xoperands[0];
rtx op1 = xoperands[1];
if ((align & 3) == 0 && (size & 3) == 0 && (size >> 2) <= 16)
{
if (memory_address_p (SImode, plus_constant (op0, size))
&& memory_address_p (SImode, plus_constant (op1, size)))
{
cc_status.flags &= ~CC_KNOW_HI_R31;
for (i = (size>>2)-1; i >= 0; i--)
{
xoperands[0] = plus_constant (op0, i * 4);
xoperands[1] = plus_constant (op1, i * 4);
output_asm_insn ("ld.l %a1,%?r31\n\tst.l %?r31,%a0",
xoperands);
}
return "";
}
}
else if ((align & 1) == 0 && (size & 1) == 0 && (size >> 1) <= 16)
{
if (memory_address_p (HImode, plus_constant (op0, size))
&& memory_address_p (HImode, plus_constant (op1, size)))
{
cc_status.flags &= ~CC_KNOW_HI_R31;
for (i = (size>>1)-1; i >= 0; i--)
{
xoperands[0] = plus_constant (op0, i * 2);
xoperands[1] = plus_constant (op1, i * 2);
output_asm_insn ("ld.s %a1,%?r31\n\tst.s %?r31,%a0",
xoperands);
}
return "";
}
}
else if (size <= 16)
{
if (memory_address_p (QImode, plus_constant (op0, size))
&& memory_address_p (QImode, plus_constant (op1, size)))
{
cc_status.flags &= ~CC_KNOW_HI_R31;
for (i = size-1; i >= 0; i--)
{
xoperands[0] = plus_constant (op0, i);
xoperands[1] = plus_constant (op1, i);
output_asm_insn ("ld.b %a1,%?r31\n\tst.b %?r31,%a0",
xoperands);
}
return "";
}
}
}
/* Since we clobber untold things, nix the condition codes. */
CC_STATUS_INIT;
/* This is the size of the transfer.
Either use the register which already contains the size,
or use a free register (used by no operands). */
output_size_for_block_move (operands[2], operands[4], alignrtx);
#if 0
/* Also emit code to decrement the size value by ALIGN. */
zoperands[0] = operands[0];
zoperands[3] = plus_constant (operands[0], align);
output_load_address (zoperands);
#endif
/* Generate number for unique label. */
xoperands[3] = GEN_INT (movstrsi_label++);
/* Calculate the size of the chunks we will be trying to move first. */
#if 0
if ((align & 3) == 0)
chunk_size = 4;
else if ((align & 1) == 0)
chunk_size = 2;
else
#endif
chunk_size = 1;
/* Copy the increment (negative) to a register for bla insn. */
xoperands[4] = GEN_INT (- chunk_size);
xoperands[5] = operands[5];
output_asm_insn ("adds %4,%?r0,%5", xoperands);
/* Predecrement the loop counter. This happens again also in the `bla'
instruction which precedes the loop, but we need to have it done
two times before we enter the loop because of the bizarre semantics
of the bla instruction. */
output_asm_insn ("adds %5,%2,%2", xoperands);
/* Check for the case where the original count was less than or equal to
zero. Avoid going through the loop at all if the original count was
indeed less than or equal to zero. Note that we treat the count as
if it were a signed 32-bit quantity here, rather than an unsigned one,
even though we really shouldn't. We have to do this because of the
semantics of the `ble' instruction, which assume that the count is
a signed 32-bit value. Anyway, in practice it won't matter because
nobody is going to try to do a memcpy() of more than half of the
entire address space (i.e. 2 gigabytes) anyway. */
output_asm_insn ("bc .Le%3", xoperands);
/* Make available a register which is a temporary. */
xoperands[6] = operands[6];
/* Now the actual loop.
In xoperands, elements 1 and 0 are the input and output vectors.
Element 2 is the loop index. Element 5 is the increment. */
output_asm_insn ("subs %1,%5,%1", xoperands);
output_asm_insn ("bla %5,%2,.Lm%3", xoperands);
output_asm_insn ("adds %0,%2,%6", xoperands);
output_asm_insn ("\n.Lm%3:", xoperands); /* Label for bla above. */
output_asm_insn ("\n.Ls%3:", xoperands); /* Loop start label. */
output_asm_insn ("adds %5,%6,%6", xoperands);
/* NOTE: The code here which is supposed to handle the cases where the
sources and destinations are known to start on a 4 or 2 byte boundary
are currently broken. They fail to do anything about the overflow
bytes which might still need to be copied even after we have copied
some number of words or halfwords. Thus, for now we use the lowest
common denominator, i.e. the code which just copies some number of
totally unaligned individual bytes. (See the calculation of
chunk_size above. */
if (chunk_size == 4)
{
output_asm_insn ("ld.l %2(%1),%?r31", xoperands);
output_asm_insn ("bla %5,%2,.Ls%3", xoperands);
output_asm_insn ("st.l %?r31,8(%6)", xoperands);
}
else if (chunk_size == 2)
{
output_asm_insn ("ld.s %2(%1),%?r31", xoperands);
output_asm_insn ("bla %5,%2,.Ls%3", xoperands);
output_asm_insn ("st.s %?r31,4(%6)", xoperands);
}
else /* chunk_size == 1 */
{
output_asm_insn ("ld.b %2(%1),%?r31", xoperands);
output_asm_insn ("bla %5,%2,.Ls%3", xoperands);
output_asm_insn ("st.b %?r31,2(%6)", xoperands);
}
output_asm_insn ("\n.Le%3:", xoperands); /* Here if count <= 0. */
return "";
}
/* Special routine to convert an SFmode value represented as a
CONST_DOUBLE into its equivalent unsigned long bit pattern.
We convert the value from a double precision floating-point
value to single precision first, and thence to a bit-wise
equivalent unsigned long value. This routine is used when
generating an immediate move of an SFmode value directly
into a general register because the SVR4 assembler doesn't
grok floating literals in instruction operand contexts. */
unsigned long
sfmode_constant_to_ulong (rtx x)
{
REAL_VALUE_TYPE d;
unsigned long l;
if (GET_CODE (x) != CONST_DOUBLE || GET_MODE (x) != SFmode)
abort ();
REAL_VALUE_FROM_CONST_DOUBLE (d, x);
REAL_VALUE_TO_TARGET_SINGLE (d, l);
return l;
}
/* This function generates the assembly code for function entry.
ASM_FILE is a stdio stream to output the code to.
SIZE is an int: how many units of temporary storage to allocate.
Refer to the array `regs_ever_live' to determine which registers
to save; `regs_ever_live[I]' is nonzero if register number I
is ever used in the function. This macro is responsible for
knowing which registers should not be saved even if used.
NOTE: `frame_lower_bytes' is the count of bytes which will lie
between the new `fp' value and the new `sp' value after the
prologue is done. `frame_upper_bytes' is the count of bytes
that will lie between the new `fp' and the *old* `sp' value
after the new `fp' is setup (in the prologue). The upper
part of each frame always includes at least 2 words (8 bytes)
to hold the saved frame pointer and the saved return address.
The SVR4 ABI for the i860 now requires that the values of the
stack pointer and frame pointer registers be kept aligned to
16-byte boundaries at all times. We obey that restriction here.
The SVR4 ABI for the i860 is entirely vague when it comes to specifying
exactly where the "preserved" registers should be saved. The native
SVR4 C compiler I now have doesn't help to clarify the requirements
very much because it is plainly out-of-date and non-ABI-compliant
(in at least one important way, i.e. how it generates function
epilogues).
The native SVR4 C compiler saves the "preserved" registers (i.e.
r4-r15 and f2-f7) in the lower part of a frame (i.e. at negative
offsets from the frame pointer).
Previous versions of GCC also saved the "preserved" registers in the
"negative" part of the frame, but they saved them using positive
offsets from the (adjusted) stack pointer (after it had been adjusted
to allocate space for the new frame). That's just plain wrong
because if the current function calls alloca(), the stack pointer
will get moved, and it will be impossible to restore the registers
properly again after that.
Both compilers handled parameter registers (i.e. r16-r27 and f8-f15)
by copying their values either into various "preserved" registers or
into stack slots in the lower part of the current frame (as seemed
appropriate, depending upon subsequent usage of these values).
Here we want to save the preserved registers at some offset from the
frame pointer register so as to avoid any possible problems arising
from calls to alloca(). We can either save them at small positive
offsets from the frame pointer, or at small negative offsets from
the frame pointer. If we save them at small negative offsets from
the frame pointer (i.e. in the lower part of the frame) then we
must tell the rest of GCC (via STARTING_FRAME_OFFSET) exactly how
many bytes of space we plan to use in the lower part of the frame
for this purpose. Since other parts of the compiler reference the
value of STARTING_FRAME_OFFSET long before final() calls this function,
we would have to go ahead and assume the worst-case storage requirements
for saving all of the "preserved" registers (and use that number, i.e.
`80', to define STARTING_FRAME_OFFSET) if we wanted to save them in
the lower part of the frame. That could potentially be very wasteful,
and that wastefulness could really hamper people compiling for embedded
i860 targets with very tight limits on stack space. Thus, we choose
here to save the preserved registers in the upper part of the
frame, so that we can decide at the very last minute how much (or how
little) space we must allocate for this purpose.
To satisfy the needs of the SVR4 ABI "tdesc" scheme, preserved
registers must always be saved so that the saved values of registers
with higher numbers are at higher addresses. We obey that restriction
here.
There are two somewhat different ways that you can generate prologues
here... i.e. pedantically ABI-compliant, and the "other" way. The
"other" way is more consistent with what is currently generated by the
"native" SVR4 C compiler for the i860. That's important if you want
to use the current (as of 8/91) incarnation of SVR4 SDB for the i860.
The SVR4 SDB for the i860 insists on having function prologues be
non-ABI-compliant!
To get fully ABI-compliant prologues, define I860_STRICT_ABI_PROLOGUES
in the i860/sysv4.h file. (By default this is *not* defined).
The differences between the ABI-compliant and non-ABI-compliant prologues
are that (a) the ABI version seems to require the use of *signed*
(rather than unsigned) adds and subtracts, and (b) the ordering of
the various steps (e.g. saving preserved registers, saving the
return address, setting up the new frame pointer value) is different.
For strict ABI compliance, it seems to be the case that the very last
thing that is supposed to happen in the prologue is getting the frame
pointer set to its new value (but only after everything else has
already been properly setup). We do that here, but only if the symbol
I860_STRICT_ABI_PROLOGUES is defined. */
#ifndef STACK_ALIGNMENT
#define STACK_ALIGNMENT 16
#endif
const char *current_function_original_name;
static int must_preserve_r1;
static unsigned must_preserve_bytes;
static void
i860_output_function_prologue (FILE *asm_file, HOST_WIDE_INT local_bytes)
{
register HOST_WIDE_INT frame_lower_bytes;
register HOST_WIDE_INT frame_upper_bytes;
register HOST_WIDE_INT total_fsize;
register unsigned preserved_reg_bytes = 0;
register unsigned i;
register unsigned preserved_so_far = 0;
must_preserve_r1 = (optimize < 2 || ! leaf_function_p ());
must_preserve_bytes = 4 + (must_preserve_r1 ? 4 : 0);
/* Count registers that need preserving. Ignore r0. It never needs
preserving. */
for (i = 1; i < FIRST_PSEUDO_REGISTER; i++)
{
if (regs_ever_live[i] && ! call_used_regs[i])
preserved_reg_bytes += 4;
}
/* Round-up the frame_lower_bytes so that it's a multiple of 16. */
frame_lower_bytes = (local_bytes + STACK_ALIGNMENT - 1) & -STACK_ALIGNMENT;
/* The upper part of each frame will contain the saved fp,
the saved r1, and stack slots for all of the other "preserved"
registers that we find we will need to save & restore. */
frame_upper_bytes = must_preserve_bytes + preserved_reg_bytes;
/* Round-up the frame_upper_bytes so that it's a multiple of 16. */
frame_upper_bytes
= (frame_upper_bytes + STACK_ALIGNMENT - 1) & -STACK_ALIGNMENT;
total_fsize = frame_upper_bytes + frame_lower_bytes;
#ifndef I860_STRICT_ABI_PROLOGUES
/* There are two kinds of function prologues.
You use the "small" version if the total frame size is
small enough so that it can fit into an immediate 16-bit
value in one instruction. Otherwise, you use the "large"
version of the function prologue. */
if (total_fsize > 0x7fff)
{
/* Adjust the stack pointer. The ABI specifies using `adds' for
this, but the native C compiler on SVR4 uses `addu'. */
fprintf (asm_file, "\taddu -" HOST_WIDE_INT_PRINT_DEC ",%ssp,%ssp\n",
frame_upper_bytes, i860_reg_prefix, i860_reg_prefix);
/* Save the old frame pointer. */
fprintf (asm_file, "\tst.l %sfp,0(%ssp)\n",
i860_reg_prefix, i860_reg_prefix);
/* Setup the new frame pointer. The ABI specifies that this is to
be done after preserving registers (using `adds'), but that's not
what the native C compiler on SVR4 does. */
fprintf (asm_file, "\taddu 0,%ssp,%sfp\n",
i860_reg_prefix, i860_reg_prefix);
/* Get the value of frame_lower_bytes into r31. */
fprintf (asm_file, "\torh " HOST_WIDE_INT_PRINT_DEC ",%sr0,%sr31\n",
frame_lower_bytes >> 16, i860_reg_prefix, i860_reg_prefix);
fprintf (asm_file, "\tor " HOST_WIDE_INT_PRINT_DEC ",%sr31,%sr31\n",
frame_lower_bytes & 0xffff, i860_reg_prefix, i860_reg_prefix);
/* Now re-adjust the stack pointer using the value in r31.
The ABI specifies that this is done with `subs' but SDB may
prefer `subu'. */
fprintf (asm_file, "\tsubu %ssp,%sr31,%ssp\n",
i860_reg_prefix, i860_reg_prefix, i860_reg_prefix);
/* Preserve registers. The ABI specifies that this is to be done
before setting up the new frame pointer, but that's not what the
native C compiler on SVR4 does. */
for (i = 1; i < 32; i++)
if (regs_ever_live[i] && ! call_used_regs[i])
fprintf (asm_file, "\tst.l %s%s,%d(%sfp)\n",
i860_reg_prefix, reg_names[i],
must_preserve_bytes + (4 * preserved_so_far++),
i860_reg_prefix);
for (i = 32; i < 64; i++)
if (regs_ever_live[i] && ! call_used_regs[i])
fprintf (asm_file, "\tfst.l %s%s,%d(%sfp)\n",
i860_reg_prefix, reg_names[i],
must_preserve_bytes + (4 * preserved_so_far++),
i860_reg_prefix);
/* Save the return address. */
if (must_preserve_r1)
fprintf (asm_file, "\tst.l %sr1,4(%sfp)\n",
i860_reg_prefix, i860_reg_prefix);
}
else
{
/* Adjust the stack pointer. The ABI specifies using `adds' for this,
but the native C compiler on SVR4 uses `addu'. */
fprintf (asm_file, "\taddu -" HOST_WIDE_INT_PRINT_DEC ",%ssp,%ssp\n",
total_fsize, i860_reg_prefix, i860_reg_prefix);
/* Save the old frame pointer. */
fprintf (asm_file, "\tst.l %sfp," HOST_WIDE_INT_PRINT_DEC "(%ssp)\n",
i860_reg_prefix, frame_lower_bytes, i860_reg_prefix);
/* Setup the new frame pointer. The ABI specifies that this is to be
done after preserving registers and after saving the return address,
(and to do it using `adds'), but that's not what the native C
compiler on SVR4 does. */
fprintf (asm_file, "\taddu " HOST_WIDE_INT_PRINT_DEC ",%ssp,%sfp\n",
frame_lower_bytes, i860_reg_prefix, i860_reg_prefix);
/* Preserve registers. The ABI specifies that this is to be done
before setting up the new frame pointer, but that's not what the
native compiler on SVR4 does. */
for (i = 1; i < 32; i++)
if (regs_ever_live[i] && ! call_used_regs[i])
fprintf (asm_file, "\tst.l %s%s,%d(%sfp)\n",
i860_reg_prefix, reg_names[i],
must_preserve_bytes + (4 * preserved_so_far++),
i860_reg_prefix);
for (i = 32; i < 64; i++)
if (regs_ever_live[i] && ! call_used_regs[i])
fprintf (asm_file, "\tfst.l %s%s,%d(%sfp)\n",
i860_reg_prefix, reg_names[i],
must_preserve_bytes + (4 * preserved_so_far++),
i860_reg_prefix);
/* Save the return address. The ABI specifies that this is to be
done earlier, and also via an offset from %sp, but the native C
compiler on SVR4 does it later (i.e. now) and uses an offset from
%fp. */
if (must_preserve_r1)
fprintf (asm_file, "\tst.l %sr1,4(%sfp)\n",
i860_reg_prefix, i860_reg_prefix);
}
#else /* defined(I860_STRICT_ABI_PROLOGUES) */
/* There are two kinds of function prologues.
You use the "small" version if the total frame size is
small enough so that it can fit into an immediate 16-bit
value in one instruction. Otherwise, you use the "large"
version of the function prologue. */
if (total_fsize > 0x7fff)
{
/* Adjust the stack pointer (thereby allocating a new frame). */
fprintf (asm_file, "\tadds -%d,%ssp,%ssp\n",
frame_upper_bytes, i860_reg_prefix, i860_reg_prefix);
/* Save the caller's frame pointer. */
fprintf (asm_file, "\tst.l %sfp,0(%ssp)\n",
i860_reg_prefix, i860_reg_prefix);
/* Save return address. */
if (must_preserve_r1)
fprintf (asm_file, "\tst.l %sr1,4(%ssp)\n",
i860_reg_prefix, i860_reg_prefix);
/* Get the value of frame_lower_bytes into r31 for later use. */
fprintf (asm_file, "\torh %d,%sr0,%sr31\n",
frame_lower_bytes >> 16, i860_reg_prefix, i860_reg_prefix);
fprintf (asm_file, "\tor %d,%sr31,%sr31\n",
frame_lower_bytes & 0xffff, i860_reg_prefix, i860_reg_prefix);
/* Now re-adjust the stack pointer using the value in r31. */
fprintf (asm_file, "\tsubs %ssp,%sr31,%ssp\n",
i860_reg_prefix, i860_reg_prefix, i860_reg_prefix);
/* Pre-compute value to be used as the new frame pointer. */
fprintf (asm_file, "\tadds %ssp,%sr31,%sr31\n",
i860_reg_prefix, i860_reg_prefix, i860_reg_prefix);
/* Preserve registers. */
for (i = 1; i < 32; i++)
if (regs_ever_live[i] && ! call_used_regs[i])
fprintf (asm_file, "\tst.l %s%s,%d(%sr31)\n",
i860_reg_prefix, reg_names[i],
must_preserve_bytes + (4 * preserved_so_far++),
i860_reg_prefix);
for (i = 32; i < 64; i++)
if (regs_ever_live[i] && ! call_used_regs[i])
fprintf (asm_file, "\tfst.l %s%s,%d(%sr31)\n",
i860_reg_prefix, reg_names[i],
must_preserve_bytes + (4 * preserved_so_far++),
i860_reg_prefix);
/* Actually set the new value of the frame pointer. */
fprintf (asm_file, "\tmov %sr31,%sfp\n",
i860_reg_prefix, i860_reg_prefix);
}
else
{
/* Adjust the stack pointer. */
fprintf (asm_file, "\tadds -%d,%ssp,%ssp\n",
total_fsize, i860_reg_prefix, i860_reg_prefix);
/* Save the caller's frame pointer. */
fprintf (asm_file, "\tst.l %sfp,%d(%ssp)\n",
i860_reg_prefix, frame_lower_bytes, i860_reg_prefix);
/* Save the return address. */
if (must_preserve_r1)
fprintf (asm_file, "\tst.l %sr1,%d(%ssp)\n",
i860_reg_prefix, frame_lower_bytes + 4, i860_reg_prefix);
/* Preserve registers. */
for (i = 1; i < 32; i++)
if (regs_ever_live[i] && ! call_used_regs[i])
fprintf (asm_file, "\tst.l %s%s,%d(%ssp)\n",
i860_reg_prefix, reg_names[i],
frame_lower_bytes + must_preserve_bytes + (4 * preserved_so_far++),
i860_reg_prefix);
for (i = 32; i < 64; i++)
if (regs_ever_live[i] && ! call_used_regs[i])
fprintf (asm_file, "\tfst.l %s%s,%d(%ssp)\n",
i860_reg_prefix, reg_names[i],
frame_lower_bytes + must_preserve_bytes + (4 * preserved_so_far++),
i860_reg_prefix);
/* Setup the new frame pointer. */
fprintf (asm_file, "\tadds %d,%ssp,%sfp\n",
frame_lower_bytes, i860_reg_prefix, i860_reg_prefix);
}
#endif /* defined(I860_STRICT_ABI_PROLOGUES) */
#ifdef ASM_OUTPUT_PROLOGUE_SUFFIX
ASM_OUTPUT_PROLOGUE_SUFFIX (asm_file);
#endif /* defined(ASM_OUTPUT_PROLOGUE_SUFFIX) */
}
/* This function generates the assembly code for function exit.
ASM_FILE is a stdio stream to output the code to.
SIZE is an int: how many units of temporary storage to allocate.
The function epilogue should not depend on the current stack pointer!
It should use the frame pointer only. This is mandatory because
of alloca; we also take advantage of it to omit stack adjustments
before returning.
Note that when we go to restore the preserved register values we must
not try to address their slots by using offsets from the stack pointer.
That's because the stack pointer may have been moved during the function
execution due to a call to alloca(). Rather, we must restore all
preserved registers via offsets from the frame pointer value.
Note also that when the current frame is being "popped" (by adjusting
the value of the stack pointer) on function exit, we must (for the
sake of alloca) set the new value of the stack pointer based upon
the current value of the frame pointer. We can't just add what we
believe to be the (static) frame size to the stack pointer because
if we did that, and alloca() had been called during this function,
we would end up returning *without* having fully deallocated all of
the space grabbed by alloca. If that happened, and a function
containing one or more alloca() calls was called over and over again,
then the stack would grow without limit!
Finally note that the epilogues generated here are completely ABI
compliant. They go out of their way to insure that the value in
the frame pointer register is never less than the value in the stack
pointer register. It's not clear why this relationship needs to be
maintained at all times, but maintaining it only costs one extra
instruction, so what the hell. */
/* This corresponds to a version 4 TDESC structure. Lower numbered
versions successively omit the last word of the structure. We
don't try to handle version 5 here. */
typedef struct TDESC_flags {
int version:4;
int reg_packing:1;
int callable_block:1;
int reserved:4;
int fregs:6; /* fp regs 2-7 */
int iregs:16; /* regs 0-15 */
} TDESC_flags;
typedef struct TDESC {
TDESC_flags flags;
int integer_reg_offset; /* same as must_preserve_bytes */
int floating_point_reg_offset;
unsigned int positive_frame_size; /* same as frame_upper_bytes */
unsigned int negative_frame_size; /* same as frame_lower_bytes */
} TDESC;
static void
i860_output_function_epilogue (FILE *asm_file, HOST_WIDE_INT local_bytes)
{
register HOST_WIDE_INT frame_upper_bytes;
register HOST_WIDE_INT frame_lower_bytes;
register HOST_WIDE_INT preserved_reg_bytes = 0;
register unsigned i;
register unsigned restored_so_far = 0;
register unsigned int_restored;
register unsigned mask;
unsigned intflags=0;
register TDESC_flags *flags = (TDESC_flags *) &intflags;
#ifdef OUTPUT_TDESC /* Output an ABI-compliant TDESC entry */
const char *long_op = integer_asm_op (4, TRUE);
#endif
flags->version = 4;
flags->reg_packing = 1;
flags->iregs = 8; /* old fp always gets saved */
/* Round-up the frame_lower_bytes so that it's a multiple of 16. */
frame_lower_bytes = (local_bytes + STACK_ALIGNMENT - 1) & -STACK_ALIGNMENT;
/* Count the number of registers that were preserved in the prologue.
Ignore r0. It is never preserved. */
for (i = 1; i < FIRST_PSEUDO_REGISTER; i++)
{
if (regs_ever_live[i] && ! call_used_regs[i])
preserved_reg_bytes += 4;
}
/* The upper part of each frame will contain only saved fp,
the saved r1, and stack slots for all of the other "preserved"
registers that we find we will need to save & restore. */
frame_upper_bytes = must_preserve_bytes + preserved_reg_bytes;
/* Round-up frame_upper_bytes so that t is a multiple of 16. */
frame_upper_bytes
= (frame_upper_bytes + STACK_ALIGNMENT - 1) & -STACK_ALIGNMENT;
/* Restore all of the "preserved" registers that need restoring. */
mask = 2;
for (i = 1; i < 32; i++, mask<<=1)
if (regs_ever_live[i] && ! call_used_regs[i]) {
fprintf (asm_file, "\tld.l %d(%sfp),%s%s\n",
must_preserve_bytes + (4 * restored_so_far++),
i860_reg_prefix, i860_reg_prefix, reg_names[i]);
if (i > 3 && i < 16)
flags->iregs |= mask;
}
int_restored = restored_so_far;
mask = 1;
for (i = 32; i < 64; i++) {
if (regs_ever_live[i] && ! call_used_regs[i]) {
fprintf (asm_file, "\tfld.l %d(%sfp),%s%s\n",
must_preserve_bytes + (4 * restored_so_far++),
i860_reg_prefix, i860_reg_prefix, reg_names[i]);
if (i > 33 && i < 40)
flags->fregs |= mask;
}
if (i > 33 && i < 40)
mask<<=1;
}
/* Get the value we plan to use to restore the stack pointer into r31. */
fprintf (asm_file, "\tadds " HOST_WIDE_INT_PRINT_DEC ",%sfp,%sr31\n",
frame_upper_bytes, i860_reg_prefix, i860_reg_prefix);
/* Restore the return address and the old frame pointer. */
if (must_preserve_r1) {
fprintf (asm_file, "\tld.l 4(%sfp),%sr1\n",
i860_reg_prefix, i860_reg_prefix);
flags->iregs |= 2;
}
fprintf (asm_file, "\tld.l 0(%sfp),%sfp\n",
i860_reg_prefix, i860_reg_prefix);
/* Return and restore the old stack pointer value. */
fprintf (asm_file, "\tbri %sr1\n\tmov %sr31,%ssp\n",
i860_reg_prefix, i860_reg_prefix, i860_reg_prefix);
#ifdef OUTPUT_TDESC /* Output an ABI-compliant TDESC entry. */
if (! frame_lower_bytes) {
flags->version--;
if (! frame_upper_bytes) {
flags->version--;
if (restored_so_far == int_restored) /* No FP saves. */
flags->version--;
}
}
assemble_name(asm_file,current_function_original_name);
fputs(".TDESC:\n", asm_file);
fprintf(asm_file, "%s 0x%0x\n", long_op, intflags);
fprintf(asm_file, "%s %d\n", long_op,
int_restored ? must_preserve_bytes : 0);
if (flags->version > 1) {
fprintf(asm_file, "%s %d\n", long_op,
(restored_so_far == int_restored) ? 0 : must_preserve_bytes +
(4 * int_restored));
if (flags->version > 2) {
fprintf(asm_file, "%s %d\n", long_op, frame_upper_bytes);
if (flags->version > 3)
fprintf(asm_file, "%s %d\n", long_op, frame_lower_bytes);
}
}
tdesc_section();
fprintf(asm_file, "%s ", long_op);
assemble_name(asm_file, current_function_original_name);
fprintf(asm_file, "\n%s ", long_op);
assemble_name(asm_file, current_function_original_name);
fputs(".TDESC\n", asm_file);
text_section();
#endif
}
/* Expand a library call to __builtin_saveregs. */
rtx
i860_saveregs (void)
{
rtx fn = gen_rtx_SYMBOL_REF (Pmode, "__builtin_saveregs");
rtx save = gen_reg_rtx (Pmode);
rtx valreg = LIBCALL_VALUE (Pmode);
rtx ret;
/* The return value register overlaps the first argument register.
Save and restore it around the call. */
emit_move_insn (save, valreg);
ret = emit_library_call_value (fn, NULL_RTX, 1, Pmode, 0);
if (GET_CODE (ret) != REG || REGNO (ret) < FIRST_PSEUDO_REGISTER)
ret = copy_to_reg (ret);
emit_move_insn (valreg, save);
return ret;
}
/* Create the va_list data type.
The SVR4 ABI requires the following structure:
typedef struct {
unsigned long ireg_used;
unsigned long freg_used;
long *reg_base;
long *mem_ptr;
} va_list;
Otherwise, this structure is used:
typedef struct {
long *reg_base;
long *mem_ptr;
unsigned long ireg_used;
unsigned long freg_used;
} va_list;
The tree representing the va_list declaration is returned. */
static tree
i860_build_builtin_va_list (void)
{
tree f_gpr, f_fpr, f_mem, f_sav, record, type_decl;
record = (*lang_hooks.types.make_type) (RECORD_TYPE);
type_decl = build_decl (TYPE_DECL, get_identifier ("__va_list_tag"), record);
f_gpr = build_decl (FIELD_DECL, get_identifier ("__ireg_used"),
unsigned_type_node);
f_fpr = build_decl (FIELD_DECL, get_identifier ("__freg_used"),
unsigned_type_node);
f_sav = build_decl (FIELD_DECL, get_identifier ("__reg_base"),
ptr_type_node);
f_mem = build_decl (FIELD_DECL, get_identifier ("__mem_ptr"),
ptr_type_node);
DECL_FIELD_CONTEXT (f_gpr) = record;
DECL_FIELD_CONTEXT (f_fpr) = record;
DECL_FIELD_CONTEXT (f_sav) = record;
DECL_FIELD_CONTEXT (f_mem) = record;
TREE_CHAIN (record) = type_decl;
TYPE_NAME (record) = type_decl;
#ifdef I860_SVR4_VA_LIST
TYPE_FIELDS (record) = f_gpr;
TREE_CHAIN (f_gpr) = f_fpr;
TREE_CHAIN (f_fpr) = f_sav;
TREE_CHAIN (f_sav) = f_mem;
#else
TYPE_FIELDS (record) = f_sav;
TREE_CHAIN (f_sav) = f_mem;
TREE_CHAIN (f_mem) = f_gpr;
TREE_CHAIN (f_gpr) = f_fpr;
#endif
layout_type (record);
return record;
}
/* Initialize the va_list structure. */
void
i860_va_start (tree valist, rtx nextarg ATTRIBUTE_UNUSED)
{
tree saveregs, t;
tree f_gpr, f_fpr, f_mem, f_sav;
tree gpr, fpr, mem, sav;
int off = 0;
saveregs = make_tree (ptr_type_node, expand_builtin_saveregs ());
#ifdef I860_SVR4_VA_LIST
f_gpr = TYPE_FIELDS (va_list_type_node);
f_fpr = TREE_CHAIN (f_gpr);
f_sav = TREE_CHAIN (f_fpr);
f_mem = TREE_CHAIN (f_sav);
#else
f_sav = TYPE_FIELDS (va_list_type_node);
f_mem = TREE_CHAIN (f_sav);
f_gpr = TREE_CHAIN (f_mem);
f_fpr = TREE_CHAIN (f_gpr);
#endif
gpr = build (COMPONENT_REF, TREE_TYPE (f_gpr), valist, f_gpr);
fpr = build (COMPONENT_REF, TREE_TYPE (f_fpr), valist, f_fpr);
sav = build (COMPONENT_REF, TREE_TYPE (f_sav), valist, f_sav);
mem = build (COMPONENT_REF, TREE_TYPE (f_mem), valist, f_mem);
/* Initialize the `mem_ptr' field to the address of the first anonymous
stack argument. */
t = make_tree (TREE_TYPE (mem), virtual_incoming_args_rtx);
off = INTVAL (current_function_arg_offset_rtx);
off = off < 0 ? 0 : off;
t = build (PLUS_EXPR, TREE_TYPE (mem), t, build_int_2 (off, 0));
t = build (MODIFY_EXPR, TREE_TYPE (mem), mem, t);
TREE_SIDE_EFFECTS (t) = 1;
expand_expr (t, const0_rtx, VOIDmode, EXPAND_NORMAL);
/* Initialize the `ireg_used' field. */
t = build_int_2 (current_function_args_info.ints / UNITS_PER_WORD, 0);
t = build (MODIFY_EXPR, TREE_TYPE (gpr), gpr, t);
TREE_SIDE_EFFECTS (t) = 1;
expand_expr (t, const0_rtx, VOIDmode, EXPAND_NORMAL);
/* Initialize the `freg_used' field. */
t = build_int_2 (current_function_args_info.floats / UNITS_PER_WORD, 0);
t = build (MODIFY_EXPR, TREE_TYPE (fpr), fpr, t);
TREE_SIDE_EFFECTS (t) = 1;
expand_expr (t, const0_rtx, VOIDmode, EXPAND_NORMAL);
/* Initialize the `reg_base' field. */
t = build (MODIFY_EXPR, TREE_TYPE (sav), sav, saveregs);
TREE_SIDE_EFFECTS (t) = 1;
expand_expr (t, const0_rtx, VOIDmode, EXPAND_NORMAL);
}
#define NUM_PARM_FREGS 8
#define NUM_PARM_IREGS 12
#ifdef I860_SVR4_VA_LIST
#define FREG_OFFSET 0
#define IREG_OFFSET (NUM_PARM_FREGS * UNITS_PER_WORD)
#else
#define FREG_OFFSET (NUM_PARM_IREGS * UNITS_PER_WORD)
#define IREG_OFFSET 0
#endif
/* Update the VALIST structure as necessary for an
argument of the given TYPE, and return the argument. */
rtx
i860_va_arg (tree valist, tree type)
{
tree f_gpr, f_fpr, f_mem, f_sav;
tree gpr, fpr, mem, sav, reg, t, u;
int size, n_reg, sav_ofs, sav_scale, max_reg;
rtx lab_false, lab_over, addr_rtx, r;
#ifdef I860_SVR4_VA_LIST
f_gpr = TYPE_FIELDS (va_list_type_node);
f_fpr = TREE_CHAIN (f_gpr);
f_sav = TREE_CHAIN (f_fpr);
f_mem = TREE_CHAIN (f_sav);
#else
f_sav = TYPE_FIELDS (va_list_type_node);
f_mem = TREE_CHAIN (f_sav);
f_gpr = TREE_CHAIN (f_mem);
f_fpr = TREE_CHAIN (f_gpr);
#endif
gpr = build (COMPONENT_REF, TREE_TYPE (f_gpr), valist, f_gpr);
fpr = build (COMPONENT_REF, TREE_TYPE (f_fpr), valist, f_fpr);
mem = build (COMPONENT_REF, TREE_TYPE (f_mem), valist, f_mem);
sav = build (COMPONENT_REF, TREE_TYPE (f_sav), valist, f_sav);
size = int_size_in_bytes (type);
if (AGGREGATE_TYPE_P (type))
{
/* Aggregates are passed on the stack. */
HOST_WIDE_INT align;
align = TYPE_ALIGN (type);
if (align < BITS_PER_WORD)
align = BITS_PER_WORD;
align /= BITS_PER_UNIT;
addr_rtx = gen_reg_rtx (Pmode);
t = build (PLUS_EXPR, ptr_type_node, mem, build_int_2 (align - 1, 0));
t = build (BIT_AND_EXPR, ptr_type_node, t, build_int_2 (-align, -1));
r = expand_expr (t, addr_rtx, VOIDmode /* Pmode */, EXPAND_NORMAL);
if (r != addr_rtx)
emit_move_insn (addr_rtx, r);
t = fold (build (PLUS_EXPR, ptr_type_node,
make_tree (ptr_type_node, addr_rtx),
build_int_2 (size, 0)));
t = build (MODIFY_EXPR, ptr_type_node, mem, t);
TREE_SIDE_EFFECTS (t) = 1;
expand_expr (t, const0_rtx, VOIDmode, EXPAND_NORMAL);
return addr_rtx;
}
else if (FLOAT_TYPE_P (type) || (INTEGRAL_TYPE_P (type) && size == 8))
{
/* Floats and long longs are passed in the floating-point registers. */
reg = fpr;
n_reg = size / UNITS_PER_WORD;
sav_ofs = FREG_OFFSET;
sav_scale = UNITS_PER_WORD;
max_reg = NUM_PARM_FREGS;
}
else
{
/* Everything else is passed in general registers. */
reg = gpr;
n_reg = (size + UNITS_PER_WORD - 1) / UNITS_PER_WORD;
sav_ofs = IREG_OFFSET;
sav_scale = UNITS_PER_WORD;
max_reg = NUM_PARM_IREGS;
if (n_reg > 1)
abort ();
}
/* The value was passed in a register, so read it from the register
save area initialized by __builtin_saveregs. */
lab_false = gen_label_rtx ();
lab_over = gen_label_rtx ();
addr_rtx = gen_reg_rtx (Pmode);
emit_cmp_and_jump_insns (expand_expr (reg, NULL_RTX, Pmode, EXPAND_NORMAL),
GEN_INT (max_reg - n_reg),
GT, const1_rtx, Pmode, 0, lab_false);
if (sav_ofs)
t = build (PLUS_EXPR, ptr_type_node, sav, build_int_2 (sav_ofs, 0));
else
t = sav;
u = build (MULT_EXPR, long_integer_type_node,
reg, build_int_2 (sav_scale, 0));
TREE_SIDE_EFFECTS (u) = 1;
t = build (PLUS_EXPR, ptr_type_node, t, u);
TREE_SIDE_EFFECTS (t) = 1;
r = expand_expr (t, addr_rtx, Pmode, EXPAND_NORMAL);
if (r != addr_rtx)
emit_move_insn (addr_rtx, r);
emit_jump_insn (gen_jump (lab_over));
emit_barrier ();
emit_label (lab_false);
/* The value was passed in memory, so read it from the overflow area. */
t = save_expr (mem);
r = expand_expr (t, addr_rtx, Pmode, EXPAND_NORMAL);
if (r != addr_rtx)
emit_move_insn (addr_rtx, r);
t = build (PLUS_EXPR, TREE_TYPE (t), t, build_int_2 (size, 0));
t = build (MODIFY_EXPR, TREE_TYPE (mem), mem, t);
TREE_SIDE_EFFECTS (t) = 1;
expand_expr (t, const0_rtx, VOIDmode, EXPAND_NORMAL);
emit_label (lab_over);
/* Increment either the ireg_used or freg_used field. */
u = build (PREINCREMENT_EXPR, TREE_TYPE (reg), reg, build_int_2 (n_reg, 0));
TREE_SIDE_EFFECTS (u) = 1;
expand_expr (u, const0_rtx, VOIDmode, EXPAND_NORMAL);
return addr_rtx;
}
/* Compute a (partial) cost for rtx X. Return true if the complete
cost has been computed, and false if subexpressions should be
scanned. In either case, *TOTAL contains the cost result. */
static bool
i860_rtx_costs (rtx x, int code, int outer_code ATTRIBUTE_UNUSED, int *total)
{
switch (code)
{
case CONST_INT:
if (INTVAL (x) == 0)
*total = 0;
else if (INTVAL (x) < 0x2000 && INTVAL (x) >= -0x2000)
*total = 1;
return true;
case CONST:
case LABEL_REF:
case SYMBOL_REF:
*total = 4;
return true;
case CONST_DOUBLE:
*total = 6;
return true;
default:
return false;
}
}
static void
i860_internal_label (FILE *stream, const char *prefix, unsigned long labelno)
{
fprintf (stream, ".%s%ld:\n", prefix, labelno);
}
static void
i860_file_start (void)
{
output_file_directive (asm_out_file, main_input_filename);
fprintf (asm_out_file, "\t.version\t\"01.01\"\n");
}
static void
i860_init_libfuncs (void)
{
set_optab_libfunc (sdiv_optab, SImode, "*.div");
set_optab_libfunc (udiv_optab, SImode, "*.udiv");
set_optab_libfunc (smod_optab, SImode, "*.rem");
set_optab_libfunc (umod_optab, SImode, "*.urem");
}
/* Initialize the GCC target structure. */
#undef TARGET_RTX_COSTS
#define TARGET_RTX_COSTS i860_rtx_costs
#undef TARGET_ASM_INTERNAL_LABEL
#define TARGET_ASM_INTERNAL_LABEL i860_internal_label
#undef TARGET_ASM_FUNCTION_PROLOGUE
#define TARGET_ASM_FUNCTION_PROLOGUE i860_output_function_prologue
#undef TARGET_ASM_FUNCTION_EPILOGUE
#define TARGET_ASM_FUNCTION_EPILOGUE i860_output_function_epilogue
#undef TARGET_INIT_LIBFUNCS
#define TARGET_INIT_LIBFUNCS i860_init_libfuncs
#undef TARGET_BUILD_BUILTIN_VA_LIST
#define TARGET_BUILD_BUILTIN_VA_LIST i860_build_builtin_va_list
struct gcc_target targetm = TARGET_INITIALIZER;