| #!/bin/sh |
| # Construct makefile for libgcc. |
| # Copyright (C) 2000, 2002, 2003 Free Software Foundation, Inc. |
| # |
| # This file is part of GCC. |
| |
| # Arguments, taken from the environment, since there are a lot |
| # of them, and positional args becomes quite ugly. |
| # |
| # objext |
| # LIB1ASMFUNCS |
| # LIB2FUNCS_ST |
| # LIBGCOV |
| # LIB2ADD |
| # LIB2ADD_ST |
| # LIB2ADDEH |
| # LIB2ADDEHDEP |
| # FPBIT |
| # FPBIT_FUNCS |
| # LIB2_DIVMOD_FUNCS |
| # DPBIT |
| # DPBIT_FUNCS |
| # TPBIT |
| # TPBIT_FUNCS |
| # LIBGCC |
| # MULTILIBS |
| # EXTRA_MULTILIB_PARTS |
| # SHLIB_EXT |
| # SHLIB_LINK |
| # SHLIB_MULTILIB |
| # SHLIB_MKMAP |
| # SHLIB_MKMAP_OPTS |
| # SHLIB_MAPFILES |
| # SHLIB_NM_FLAGS |
| # SHLIB_INSTALL |
| # MULTILIB_OSDIRNAMES |
| |
| # Make needs VPATH to be literal. |
| echo 'srcdir = @srcdir@' |
| echo 'VPATH = @srcdir@' |
| echo 'EQ = =' |
| echo |
| echo 'force:' |
| echo |
| |
| # Library members defined in libgcc2.c. |
| lib2funcs='_muldi3 _negdi2 _lshrdi3 _ashldi3 _ashrdi3 |
| _cmpdi2 _ucmpdi2 _floatdidf _floatdisf _fixunsdfsi _fixunssfsi |
| _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi _fixxfdi _fixunsxfdi |
| _floatdixf _fixunsxfsi _fixtfdi _fixunstfdi _floatditf _clear_cache |
| _enable_execute_stack _trampoline __main _absvsi2 _absvdi2 _addvsi3 |
| _addvdi3 _subvsi3 _subvdi3 _mulvsi3 _mulvdi3 _negvsi2 _negvdi2 _ctors |
| _ffssi2 _ffsdi2 _clz _clzsi2 _clzdi2 _ctzsi2 _ctzdi2 _popcount_tab |
| _popcountsi2 _popcountdi2 _paritysi2 _paritydi2' |
| |
| # Disable SHLIB_LINK if shared libgcc not enabled. |
| if [ "@enable_shared@" = "no" ]; then |
| SHLIB_LINK="" |
| fi |
| |
| # Build lines. |
| |
| gcc_compile='$(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES)' |
| make_compile='$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \ |
| AR_FOR_TARGET="$(AR_FOR_TARGET)" \ |
| AR_CREATE_FOR_TARGET="$(AR_CREATE_FOR_TARGET)" \ |
| AR_EXTRACT_FOR_TARGET="$(AR_EXTRACT_FOR_TARGET)" \ |
| AR_FLAGS_FOR_TARGET="$(AR_FLAGS_FOR_TARGET)" \ |
| CC="$(CC)" CFLAGS="$(CFLAGS)" \ |
| BUILD_PREFIX="$(BUILD_PREFIX)" \ |
| BUILD_PREFIX_1="$(BUILD_PREFIX_1)" \ |
| LANGUAGES="$(LANGUAGES)"' |
| |
| # Dependencies for libgcc2.c |
| libgcc2_c_dep='stmp-dirs $(srcdir)/libgcc2.c $(CONFIG_H) coretypes.h $(TM_H) $(MACHMODE_H) longlong.h gbl-ctors.h config.status stmp-int-hdrs tsystem.h'" $LIB2ADDEHDEP" |
| |
| # Dependencies for libgcov.c |
| libgcov_c_dep='stmp-dirs $(srcdir)/libgcov.c $(CONFIG_H) coretypes.h $(TM_H) $(MACHMODE_H) longlong.h gbl-ctors.h config.status stmp-int-hdrs tsystem.h $(srcdir)/gcov-io.h $(srcdir)/gcov-io.c gcov-iov.h' |
| |
| # Dependencies for fp-bit.c |
| fpbit_c_dep='stmp-dirs config.status tsystem.h' |
| |
| # |
| # Build libgcc1 components. |
| # |
| |
| libgcc1_objs="" |
| |
| for name in $LIB1ASMFUNCS; do |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| out="libgcc/${dir}/${name}${objext}" |
| |
| echo ${out}: stmp-dirs '$(srcdir)/config/$(LIB1ASMSRC)' |
| echo " $gcc_compile" $flags -DL$name -xassembler-with-cpp \ |
| -c '$(srcdir)/config/$(LIB1ASMSRC)' -o $out |
| |
| # Remove any objects from lib2funcs and LIB2_DIVMOD_FUNCS that are |
| # defined as optimized assembly code in LIB1ASMFUNCS. |
| lib2funcs=`echo $lib2funcs | sed -e 's/^'$name' //' \ |
| -e 's/ '$name' / /' \ |
| -e 's/ '$name'$//'` |
| LIB2_DIVMOD_FUNCS=`echo $LIB2_DIVMOD_FUNCS | sed -e 's/^'$name' //' \ |
| -e 's/ '$name' / /' \ |
| -e 's/ '$name'$//'` |
| done |
| libgcc1_objs="$libgcc1_objs ${name}${objext}" |
| done |
| |
| # |
| # Build libgcc2 components. |
| # |
| |
| libgcc2_objs="" |
| libgcc2_st_objs="" |
| libgcc2_eh_objs="" |
| |
| for name in $lib2funcs; do |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| out="libgcc/${dir}/${name}${objext}" |
| |
| echo $out: $libgcc2_c_dep |
| echo " $gcc_compile" '$(MAYBE_USE_COLLECT2)' $flags -DL$name \ |
| -c '$(srcdir)/libgcc2.c' -o $out |
| done |
| libgcc2_objs="$libgcc2_objs ${name}${objext}" |
| done |
| |
| for name in $LIB2FUNCS_ST; do |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| out="libgcc/${dir}/${name}${objext}" |
| |
| echo $out: $libgcc2_c_dep |
| echo " $gcc_compile" '$(MAYBE_USE_COLLECT2)' $flags -DL$name \ |
| -c '$(srcdir)/libgcc2.c' -o $out |
| done |
| libgcc2_st_objs="$libgcc2_st_objs ${name}${objext}" |
| done |
| |
| for name in $LIB2_DIVMOD_FUNCS; do |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| out="libgcc/${dir}/${name}${objext}" |
| |
| echo $out: $libgcc2_c_dep |
| echo " $gcc_compile" '$(MAYBE_USE_COLLECT2)' $flags -DL$name \ |
| -c '$(srcdir)/libgcc2.c' -fexceptions -fnon-call-exceptions -o $out |
| done |
| libgcc2_objs="$libgcc2_objs ${name}${objext}" |
| done |
| |
| if [ "$FPBIT" ]; then |
| for name in $FPBIT_FUNCS; do |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| out="libgcc/${dir}/${name}${objext}" |
| |
| echo $out: $FPBIT $fpbit_c_dep |
| echo " $gcc_compile" -DFINE_GRAINED_LIBRARIES $flags -DL$name \ |
| -c $FPBIT -o $out |
| done |
| libgcc2_objs="$libgcc2_objs ${name}${objext}" |
| done |
| fi |
| |
| if [ "$DPBIT" ]; then |
| for name in $DPBIT_FUNCS; do |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| out="libgcc/${dir}/${name}${objext}" |
| |
| echo $out: $DPBIT $fpbit_c_dep |
| echo " $gcc_compile" -DFINE_GRAINED_LIBRARIES $flags -DL$name \ |
| -c $DPBIT -o $out |
| done |
| libgcc2_objs="$libgcc2_objs ${name}${objext}" |
| done |
| fi |
| |
| if [ "$TPBIT" ]; then |
| for name in $TPBIT_FUNCS; do |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| out="libgcc/${dir}/${name}${objext}" |
| |
| echo $out: $TPBIT $fpbit_c_dep |
| echo " $gcc_compile" -DFINE_GRAINED_LIBRARIES $flags -DL$name \ |
| -c $TPBIT -o $out |
| done |
| libgcc2_objs="$libgcc2_objs ${name}${objext}" |
| done |
| fi |
| |
| for file in $LIB2ADD; do |
| name=`echo $file | sed -e 's/[.][cSo]$//' -e 's/[.]asm$//' -e 's/[.]txt$//'` |
| oname=`echo $name | sed -e 's,.*/,,'` |
| |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| out="libgcc/${dir}/${oname}${objext}" |
| if [ ${name}.asm = ${file} ]; then |
| flags="$flags -xassembler-with-cpp" |
| fi |
| |
| echo $out: stmp-dirs $file |
| echo " $gcc_compile" $flags -c $file -o $out |
| done |
| libgcc2_objs="$libgcc2_objs ${oname}${objext}" |
| done |
| |
| for file in $LIB2ADDEH; do |
| name=`echo $file | sed -e 's/[.][cSo]$//' -e 's/[.]asm$//' -e 's/[.]txt$//'` |
| oname=`echo $name | sed -e 's,.*/,,'` |
| |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| out="libgcc/${dir}/${oname}${objext}" |
| if [ ${name}.asm = ${file} ]; then |
| flags="$flags -xassembler-with-cpp" |
| fi |
| |
| echo $out: stmp-dirs $file |
| echo " $gcc_compile" $flags -fexceptions -c $file -o $out |
| done |
| if [ "$SHLIB_LINK" ]; then |
| libgcc2_eh_objs="$libgcc2_eh_objs ${oname}${objext}" |
| else |
| libgcc2_objs="$libgcc2_objs ${oname}${objext}" |
| fi |
| done |
| |
| for file in $LIB2ADD_ST; do |
| name=`echo $file | sed -e 's/[.][cSo]$//' -e 's/[.]asm$//' -e 's/[.]txt$//'` |
| oname=`echo $name | sed -e 's,.*/,,'` |
| |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| out="libgcc/${dir}/${oname}${objext}" |
| if [ ${name}.asm = ${file} ]; then |
| flags="$flags -xassembler-with-cpp" |
| fi |
| |
| echo $out: stmp-dirs $file |
| echo " $gcc_compile" $flags -c $file -o $out |
| done |
| libgcc2_st_objs="$libgcc2_st_objs ${oname}${objext}" |
| done |
| |
| # |
| # build libgcov components |
| # |
| |
| libgcov_objs="" |
| |
| for name in $LIBGCOV; do |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| out="libgcc/${dir}/${name}${objext}" |
| |
| echo $out: $libgcov_c_dep |
| echo " $gcc_compile" '$(MAYBE_USE_COLLECT2)' $flags -DL$name \ |
| -c '$(srcdir)/libgcov.c' -o $out |
| done |
| libgcov_objs="$libgcov_objs ${name}${objext}" |
| done |
| |
| # SHLIB_MKMAP |
| # SHLIB_MKMAP_OPTS |
| # SHLIB_MAPFILES |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| |
| libgcc_objs="" |
| libgcc_eh_objs="" |
| for o in $libgcc1_objs; do |
| libgcc_objs="$libgcc_objs libgcc/${dir}/$o" |
| done |
| for o in $libgcc2_objs; do |
| libgcc_objs="$libgcc_objs libgcc/${dir}/$o" |
| done |
| for o in $libgcc2_eh_objs; do |
| libgcc_eh_objs="$libgcc_eh_objs libgcc/${dir}/$o" |
| done |
| libgcc_sh_objs="$libgcc_objs $libgcc_eh_objs" |
| shlib_deps="$libgcc_sh_objs" |
| |
| libgcc_st_objs="" |
| for o in $libgcc2_st_objs; do |
| libgcc_st_objs="$libgcc_st_objs libgcc/${dir}/$o" |
| done |
| |
| libgcov_a_objs="" |
| for o in $libgcov_objs; do |
| libgcov_a_objs="$libgcov_a_objs libgcc/${dir}/$o" |
| done |
| |
| if [ "$SHLIB_LINK" -a "$SHLIB_MKMAP" ]; then |
| mapfile="libgcc/${dir}/libgcc.map" |
| tmpmapfile="libgcc/${dir}/tmp-libgcc.map" |
| # This uses a here document instead of echos because some shells |
| # will convert the \1 in the second sed command to a control-A. |
| # The behavior of here documents is more predictable. |
| cat <<EOF |
| |
| ${mapfile}: $SHLIB_MKMAP $SHLIB_MAPFILES $libgcc_sh_objs |
| { \$(NM_FOR_TARGET) $SHLIB_NM_FLAGS $libgcc_sh_objs; echo %%; \\ |
| cat $SHLIB_MAPFILES \\ |
| | sed -e '/^[ ]*#/d' \\ |
| -e 's/^%\(if\|else\|elif\|endif\|define\)/#\1/' \\ |
| | $gcc_compile $flags -E -xassembler-with-cpp -; \\ |
| } | \$(AWK) -f $SHLIB_MKMAP $SHLIB_MKMAP_OPTS > ${tmpmapfile} |
| mv '$tmpmapfile' \$@ |
| EOF |
| fi |
| shlib_deps="$shlib_deps $mapfile" |
| |
| # Depend on EXTRA_MULTILIB_PARTS, since that's where crtbegin/end |
| # usually are put in a true multilib situation. |
| for f in $EXTRA_MULTILIB_PARTS; do |
| shlib_deps="$shlib_deps $dir/$f" |
| done |
| |
| libgcc_a_objs="$libgcc_objs $libgcc_st_objs" |
| |
| if [ "@libgcc_visibility@" = yes -a "$SHLIB_LINK" ]; then |
| libgcc_a_objs= |
| echo "" |
| echo "libgcc/${dir}/stacknote.s: stmp-dirs" |
| echo ' @( echo | $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) '${flags}' -S -o - -xc - | grep .note.GNU-stack || : ) > $@.tmp' |
| echo ' @mv -f $@.tmp $@' |
| echo "" |
| for o in $libgcc_objs $libgcc_st_objs; do |
| # .oS objects will have all non-local symbol definitions .hidden |
| oS=`echo ${o} | sed s~${objext}'$~.oS~g'` |
| echo "${oS}: stmp-dirs libgcc/${dir}/stacknote.s ${o}" |
| # non-GNU nm emits three fields even for undefined and typeless symbols, |
| # so explicitly omit them |
| echo ' ( $(NM_FOR_TARGET) '${SHLIB_NM_FLAGS} ${o}' | $(AWK) '\''NF == 3 && $$2 !~ /^[UN]$$/ { print "\t.hidden", $$3 }'\''; cat libgcc/${dir}/stacknote.s ) | $(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) '${flags}' -r -nostdinc -nostdlib -o $@ '${o}' -xassembler -' |
| libgcc_a_objs="${libgcc_a_objs} ${oS}" |
| done |
| fi |
| |
| # Each of these .a files depends on stmp-dirs. It would seem that |
| # this dependency is redundant, since each of the object files |
| # itself depends on stmp-dirs. However, it is possible that there |
| # are in fact no object files. In that case, the stmp-dirs |
| # dependency is required; the directory containing the archive must |
| # exist before the archive itself can be created. |
| echo "" |
| echo "${dir}/libgcc.a: stmp-dirs $libgcc_a_objs" |
| echo " -rm -rf ${dir}/libgcc.a" |
| echo ' $(AR_CREATE_FOR_TARGET)' ${dir}/libgcc.a $libgcc_a_objs |
| echo ' $(RANLIB_FOR_TARGET)' ${dir}/libgcc.a |
| |
| echo "" |
| echo "${dir}/libgcov.a: stmp-dirs $libgcov_a_objs" |
| echo " -rm -rf ${dir}/libgcov.a" |
| echo ' $(AR_CREATE_FOR_TARGET)' ${dir}/libgcov.a $libgcov_a_objs |
| echo ' $(RANLIB_FOR_TARGET)' ${dir}/libgcov.a |
| |
| if [ "$SHLIB_LINK" ]; then |
| |
| echo "" |
| echo "${dir}/libgcc_eh.a: stmp-dirs $libgcc_eh_objs" |
| echo " -rm -rf ${dir}/libgcc_eh.a" |
| echo ' $(AR_CREATE_FOR_TARGET)' ${dir}/libgcc_eh.a $libgcc_eh_objs |
| echo ' $(RANLIB_FOR_TARGET)' ${dir}/libgcc_eh.a |
| |
| if [ -z "$SHLIB_MULTILIB" ]; then |
| if [ "$dir" = . ]; then |
| shlib_base_name=libgcc_s |
| else |
| shlib_base_name=libgcc_s_`echo $dir | sed s,/,_,g` |
| fi |
| shlib_so_name="$shlib_base_name" |
| shlib_dir= |
| shlib_slibdir_qual= |
| if [ -n "$MULTILIB_OSDIRNAMES" ]; then |
| if [ "$dir" != . ]; then |
| gcc_multilib_dir=`./xgcc -B./ $flags --print-multi-directory` |
| os_multilib_dir=`./xgcc -B./ $flags --print-multi-os-directory` |
| shlib_dir="$dir"/ |
| gcc_multilib_sup=`echo $gcc_multilib_dir | sed 's~^[^/]*/~~'` |
| os_multilib_base=`echo $os_multilib_dir | sed -n "s~/${gcc_multilib_sup}\$~~p"` |
| if [ -z "$os_multilib_base" ]; then |
| shlib_so_name=libgcc_s |
| if [ "$os_multilib_dir" != "." ]; then |
| shlib_slibdir_qual="/$os_multilib_dir" |
| fi |
| else |
| shlib_so_name=libgcc_s_`echo $gcc_multilib_sup | sed s,/,_,g` |
| shlib_slibdir_qual="/$os_multilib_base" |
| fi |
| fi |
| fi |
| echo "" |
| echo "${dir}/${shlib_base_name}${SHLIB_EXT}: $shlib_deps" |
| echo " $SHLIB_LINK" \ |
| | sed -e "s%@multilib_flags@%$flags%g" \ |
| -e "s%@multilib_dir@%$dir%g" \ |
| -e "s%@shlib_objs@%$libgcc_sh_objs%g" \ |
| -e "s%@shlib_base_name@%$shlib_base_name%g" \ |
| -e "s%@shlib_map_file@%$mapfile%g" \ |
| -e "s%@shlib_so_name@%$shlib_so_name%g" \ |
| -e "s%@shlib_dir@%$shlib_dir%g" \ |
| -e "s%@shlib_slibdir_qual@%%g" |
| elif [ "$SHLIB_MULTILIB" = "$dir" ]; then |
| shlib_base_name="libgcc_s"; |
| echo "" |
| echo "${shlib_base_name}${SHLIB_EXT}: $shlib_deps" |
| echo " $SHLIB_LINK" \ |
| | sed -e "s%@multilib_flags@%$flags%g" \ |
| -e "s%@multilib_dir@%$dir%g" \ |
| -e "s%@shlib_objs@%$libgcc_sh_objs%g" \ |
| -e "s%@shlib_base_name@%$shlib_base_name%g" \ |
| -e "s%@shlib_map_file@%$mapfile%g" \ |
| -e "s%@shlib_so_name@%$shlib_base_name%g" \ |
| -e "s%@shlib_dir@%%g" \ |
| -e "s%@shlib_slibdir_qual@%%g" |
| fi |
| fi |
| done |
| |
| dirs=libgcc |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| if [ $dir != . ]; then |
| dirs="$dirs ${dir} libgcc/${dir}" |
| fi |
| done |
| echo '' |
| echo 'libgcc-stage-start:' |
| echo ' for dir in '"${dirs}"'; do \' |
| echo ' if [ -d $(stage)/$$dir ]; then true; else '$mkinstalldirs' $(stage)/$$dir; fi; \' |
| echo ' done' |
| echo ' -for dir in '"${dirs}"'; do \' |
| echo ' mv $$dir/*'"${objext}"' $(stage)/$$dir; \' |
| echo ' test ! -f $$dir/stacknote.s || mv $$dir/stacknote.s $(stage)/$$dir; \' |
| echo ' test ! -f $$dir/libgcc.a || mv $$dir/lib* $(stage)/$$dir; \' |
| echo ' done' |
| |
| echo "" |
| all=stmp-dirs |
| dirs=libgcc |
| |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| if [ $dir != . ]; then |
| dirs="$dirs ${dir} libgcc/${dir}" |
| fi |
| all="$all ${dir}/libgcc.a ${dir}/libgcov.a" |
| if [ "$SHLIB_LINK" ]; then |
| all="$all ${dir}/libgcc_eh.a" |
| if [ -z "$SHLIB_MULTILIB" ]; then |
| if [ "$dir" = "." ]; then |
| suff=""; |
| else |
| suff=_`echo $dir | sed s,/,_,g` |
| fi |
| all="$all ${dir}/libgcc_s${suff}${SHLIB_EXT}" |
| elif [ "$SHLIB_MULTILIB" = "$dir" ]; then |
| all="$all libgcc_s${SHLIB_EXT}" |
| fi |
| fi |
| done |
| |
| echo 'stmp-dirs: force' |
| echo ' for d in '"$dirs"'; do \' |
| echo ' if [ -d $$d ]; then true; else '$mkinstalldirs' $$d; fi; \' |
| echo ' done' |
| echo ' if [ -f stmp-dirs ]; then true; else touch stmp-dirs; fi' |
| |
| for f in $EXTRA_MULTILIB_PARTS; do |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| case $dir in |
| .) out=$f ; t= ;; |
| *) out=$dir/$f ; t=$dir/ ;; |
| esac |
| case $out in |
| # Prevent `make' from interpreting $out as a macro assignment |
| *'$(EQ)'*) targ="T_TARGET=$out T_TARGET" ;; |
| *) targ=$out ;; |
| esac |
| |
| echo $out: stmp-dirs |
| echo " $make_compile" \\ |
| echo ' LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)' $flags '" ' \\ |
| echo ' MULTILIB_CFLAGS="'$flags'"' T=$t $targ |
| |
| all="$all $out" |
| done |
| done |
| |
| echo "" |
| echo "all: $all" |
| |
| echo "" |
| echo "install: $all" |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| flags=`echo ${ml} | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; |
| if [ $dir != . ]; then |
| ldir='$(DESTDIR)$(libsubdir)'/$dir |
| echo " if [ -d $ldir ]; then true; else $mkinstalldirs $ldir; chmod a+rx $ldir; fi;" |
| else |
| ldir='$(DESTDIR)$(libsubdir)' |
| fi |
| echo ' $(INSTALL_DATA)' ${dir}/libgcc.a ${ldir}/ |
| echo ' $(RANLIB_FOR_TARGET)' ${ldir}/libgcc.a |
| echo ' $(INSTALL_DATA)' ${dir}/libgcov.a ${ldir}/ |
| echo ' $(RANLIB_FOR_TARGET)' ${ldir}/libgcov.a |
| |
| if [ "$SHLIB_LINK" ]; then |
| echo ' $(INSTALL_DATA)' ${dir}/libgcc_eh.a ${ldir}/ |
| echo ' $(RANLIB_FOR_TARGET)' ${ldir}/libgcc_eh.a |
| |
| if [ -z "$SHLIB_MULTILIB" ]; then |
| if [ "$dir" = . ]; then |
| shlib_base_name=libgcc_s |
| else |
| shlib_base_name=libgcc_s_`echo $dir | sed s,/,_,g` |
| fi |
| shlib_so_name="$shlib_base_name" |
| shlib_dir= |
| shlib_slibdir_qual= |
| if [ -n "$MULTILIB_OSDIRNAMES" ]; then |
| gcc_multilib_dir=`./xgcc -B./ $flags --print-multi-directory` |
| os_multilib_dir=`./xgcc -B./ $flags --print-multi-os-directory` |
| if [ "$dir" != . ]; then |
| shlib_dir="$dir"/ |
| fi |
| gcc_multilib_sup=`echo $gcc_multilib_dir | sed 's~^[^/]*/~~'` |
| os_multilib_base=`echo $os_multilib_dir | sed -n "s~/${gcc_multilib_sup}\$~~p"` |
| if [ -z "$os_multilib_base" ]; then |
| shlib_so_name=libgcc_s |
| if [ "$os_multilib_dir" != "." ]; then |
| shlib_slibdir_qual="/$os_multilib_dir" |
| fi |
| else |
| shlib_so_name=libgcc_s_`echo $gcc_multilib_sup | sed s,/,_,g` |
| shlib_slibdir_qual="/$os_multilib_base" |
| fi |
| fi |
| echo " $SHLIB_INSTALL" \ |
| | sed -e "s%@shlib_base_name@%$shlib_base_name%g" \ |
| -e "s%@shlib_so_name@%$shlib_so_name%g" \ |
| -e "s%@shlib_dir@%$shlib_dir%g" \ |
| -e "s%@shlib_slibdir_qual@%$shlib_slibdir_qual%g" |
| elif [ "$SHLIB_MULTILIB" = "$dir" ]; then |
| shlib_base_name="libgcc_s"; |
| echo " $SHLIB_INSTALL" \ |
| | sed -e "s%@shlib_base_name@%$shlib_base_name%g" \ |
| -e "s%@shlib_so_name@%$shlib_base_name%g" \ |
| -e "s%@shlib_dir@%%g" \ |
| -e "s%@shlib_slibdir_qual@%%g" |
| fi |
| fi |
| done |
| for f in $EXTRA_MULTILIB_PARTS; do |
| for ml in $MULTILIBS; do |
| dir=`echo ${ml} | sed -e 's/;.*$//' -e 's/=/$(EQ)/g'` |
| if [ $dir != . ]; then |
| out=${dir}/$f |
| ldir='$(DESTDIR)$(libsubdir)'/$dir |
| else |
| out=$f |
| ldir='$(DESTDIR)$(libsubdir)' |
| fi |
| echo ' $(INSTALL_DATA)' $out $ldir/ |
| done |
| done |
