2014-12-22  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (Attribute_to_gnu) <Attr_{Min,Max}>: If the
	type is a floating-point type, implement the semantics of the C99
	f{min,max} routines with regard to NaNs.
	(gnat_to_gnu): Call builtin_decl_implicit.
	* gcc-interface/utils2.c (compare_arrays): Adjust comments.

2014-12-22  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_field): Post the error message
	for parent overlapping on the position instead of on the first bit.
	For a field that needs strict alignment, issue the error for the
	position first and, for the size, issue an error if it is too large
	only for the atomic and aliased cases.  Issue a specific error if
	the size is not a multiple of a byte in the volatile and the strict
	alignment cases.

2014-12-22  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (check_ok_for_atomic): Rename into...
	(check_ok_for_atomic_type): ...this.  When checking the mode, also
	check that the type is sufficient aligned.  Remove useless code and
	tidy up implementation.
	(gnat_to_gnu_entity): Adjust to above renaming.
	(gnat_to_gnu_component_type): Likewise.
	(gnat_to_gnu_field): Likewise.

2014-12-17  Pierre-Marie de Rodat  <derodat@adacore.com>

	* gcc-interface/misc.c (gnat_get_array_descr_info): New.  Use it for
	the get_array_descr_info lang-hook.  Use it to tune the DWARF output
	for array types.

2014-11-24  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/Makefile.in (Cygwin/Mingw): Fix previous change.

2014-11-24  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (build_return_expr): Use INIT_EXPR instead of
	MODIFY_EXPR to assign to the return object.
	(finalize_nrv_r): Adjust to above change.
	(finalize_nrv_unc_r): Likewise.

2014-11-24  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (push_range_check_info): Replace early test
	with assertion.
	(Raise_Error_to_gnu): Do not call push_range_check_info if the loop
	stack is empty.
	* gcc-interface/utils.c (convert_to_fat_pointer): Fix formatting.
	* gcc-interface/utils2.c (gnat_invariant_expr): Deal with padded types
	and revert latest change.

2014-11-22  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (Call_to_gnu): Strip unchecked conversions on
	actuals of In parameters if the destination type is an unconstrained
	composite type.

2014-11-22  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (gnat_gimplify_expr): Add 'type' variable.
	<case NULL_EXPR>: Deal with unconstrained array types and use 'type'.
	<case ADDR_EXPR>: Use 'type'.
	<case DECL_EXPR>: Likewise.

2014-11-20  Trevor Saunders  <tsaunders@mozilla.com>

	* gcc-interface/decl.c (annotate_value_cache): Replace htab with
	hash_table.
	(annotate_value): Adjust.
	(init_gnat_decl): Likewise.
	(destroy_gnat_decl): Likewise.
	* gcc-interface/utils.c (pad_type_hash_table): Replace htab with
	hash_table.
	(init_gnat_utils): Adjust.
	(destroy_gnat_utils): Likewise.
	(lookup_and_insert_pad_type): Likewise.

2014-11-20  Arnaud Charlet  <charlet@adacore.com>

	PR ada/63931
	* gnatvsn.ads (Library_Version): Switch to "5".

2014-11-20  Thomas Quinot  <quinot@adacore.com>

	* freeze.adb (Freeze_Entity): Do not reset Is_True_Constant
	for aliased constant objects.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* exp_util.adb (Following_Address_Clause): Use new Name_Table
	boolean flag set by parser to avoid the search if there is no
	address clause anywhere for the name.
	* namet.adb (Name_Enter): Initialize Boolean_Info flag
	(Name_Find): ditto (Reinitialize): ditto (Get_Name_Table_Boolean):
	New function (Set_Name_Table_Boolean): New procedure
	* namet.ads: Add and document new Boolean field in name table
	(Get_Name_Table_Boolean): New function.
	(Set_Name_Table_Boolean): New procedure.
	* par-ch13.adb (P_Representation_Clause): Set Name_Table boolean
	flag for an identifier name if we detect an address clause or
	use-at clause for the identifier.
	* sem_ch3.adb (Analyze_Object_Declaration): Remove comment about
	Following_Address_Clause since this function is now optimized
	and is not a performance concern.
	* sem_prag.adb (Analyze_Pragma, case Elaborate): In SPARK
	mode, pragma Elaborate is now allowed, but does not suppress
	elaboration checking.

2014-11-20  Jerome Lambourg  <lambourg@adacore.com>

	* gcc-interface/Makefile.in: Add some support for VxWorks7.

2014-11-20  Thomas Quinot  <quinot@adacore.com>

	* sem_ch13.adb, freeze.adb: Minor reformatting.
	* gnat_rm.texi: Minor editing.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Minor reformatting.
	(Process_Suppress_Unsuppress): Ignore suppress Elaboration_Check
	in SPARK.

2014-11-20  Bob Duff  <duff@adacore.com>

	* gnat_rm.texi: Correction to documentation of
	'Unrestricted_Access in case of access to unconstrained array.
	* a-cofove.adb (Capacity): Fix bug -- was always
	returning Capacity_Range'Last.
	(Is_Sorted): Fix bug -- was always returning True, because
	Container.Last = Last. That test isn't even needed, because the
	loop will go around zero times in that case, so deleted that
	test rather than fixing it.
	(Reverse_Elements): Make sure to use the correct array bounds.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Analyze_Associations): In GNATProve mode, build
	wrappers for functions and operators that are actuals only if
	expander is enabled. Wrappers play no role within a generic unit.

2014-11-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_util.adb (Policy_In_Effect): Use the
	configuration level assertion flag.

2014-11-20  Arnaud Charlet  <charlet@adacore.com>

	* s-parame-ae653.ads: Update comments.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* types.ads, einfo.ads: Minor reformatting.
	* sem_elab.adb (Check_A_Call): Add guard for reference to Alias
	for variable case.

2014-11-20  Bob Duff  <duff@adacore.com>

	* a-cofove.adb (Elems,Elemsc): Use access-to-constrained arrays
	instead of access-to-unconstrained, because the latter doesn't
	work with 'Unrestricted_Access when the result is returned from
	a function.
	* a-cofove.ads (Vector): Move the discriminant-dependent array
	after the other components for efficiency. Otherwise the compiler
	will generate a lot of code to calculate the offset of the other
	components every time they're accessed.

2014-11-20  Olivier Hainque  <hainque@adacore.com>

	* opt.ads: Fix comment on Generate_SCO_Instance_Table wrt when
	it is set to true.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Expand_N_Object_Declaration): Handle properly
	a type invariant check on an object with default initialization
	and an address clause.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* sem_elab.adb (Check_A_Call): Handle variable ref case in
	SPARK (Check_Elab_Call): ditto (Find_Elab_Reference): ditto
	(Get_Referenced_Ent): ditto.
	* sem_elab.ads: Comment fixes to account for the fact that we
	now deal with variable references in SPARK mode.
	* sem_res.adb (Resolve_Entity_Name): In SPARK_Mode Call
	Check_Elab_Call for variable.

2014-11-20  Yannick Moy  <moy@adacore.com>

	* a-cofove.ads (Copy): Fix precondition, which should allow
	Capacity = 0.
	(First_To_Previous, Current_To_Last): Add necessary preconditions.

2014-11-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch3.adb (Build_Initialization_Call): Reimplement the
	circuitry which extraacts the [underlying] full view of a
	private type to handle a case where the private type acts as a
	generic actual.
	* exp_ch5.adb (Expand_Iterator_Loop_Over_Array): Inherit the
	loop label form the original loop regardless of whether it came
	from source.
	* sem_attr.adb (Analyze_Attribute): When taking 'Access of an
	expression function with a generated body that has not been
	analyzed yet, analyze the body to freeze the expression.
	* sem_util.adb (Set_Public_Status_Of): New routine.
	(Transfer_Entities): Handle the case where a private type with
	an internally generated full view is being transfered and update
	its full view.

2014-11-20  Vincent Celier  <celier@adacore.com>

	* prj-nmsc.adb (Check_Object): If a unit is in a multi-source
	file, its object file is never the same as any other unit.

2014-11-20  Bob Duff  <duff@adacore.com>

	* s-taskin.adb (Initialize_ATCB): Take into
	account the fact that the domain of the activator can be null
	if we're initializing a foreign task.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* sem_ch12.adb: Minor reformatting.

2014-11-20  Jerome Lambourg  <lambourg@adacore.com>

	* s-osinte-vxworks.ads: Add comments. Minor reformatting.

2014-11-20  Yannick Moy  <moy@adacore.com>

	* sem_prag.adb, sem_elab.adb: Minor rewording of error message in
	SPARK mode, for consistency.

2014-11-20  Vasiliy Fofanov  <fofanov@adacore.com>

	* gnat_ugn.texi: New section on gnattest stubbing. Minor
	reformatting.

2014-11-20  Jerome Lambourg  <lambourg@adacore.com>

	* s-taprop-vxworks.adb (Create_Task): Fix thread comparison.
	Minor reformatting.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* s-tassta.adb, exp_aggr.adb, s-taskin.adb, exp_strm.adb: Minor
	reformatting.
	* comperr.adb (Compiler_Abort): New wording for bug box.
	* par-ch13.adb: Minor reformatting.
	* par-ch3.adb (P_Identifier_Declarations): Handle aspect
	specifications given before initialization expression in object
	declaration cleanly.
	* gnat1drv.adb (Adjust_Global_Switches): Make sure static
	elaboration mode is set if we are operating in SPARK mode.
	* sem_ch12.adb (Analyze_Package_Instantiation): Make
	sure static elab mode is set if we are in SPARK mode.
	(Analyze_Subprogram_Instantiation): ditto.
	(Set_Instance_Env): ditto.
	* sem_elab.adb (Check_A_Call): In SPARK mode, we require
	Elaborate_All in the case of a call during elaboration to a
	subprogram in another unit.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* inline.adb (Can_Split_Unconstrained_Function,
	Build_Procedure): Copy parameter type rather than creating
	reference to the entity, to capture class-wide reference, whose
	name is not retrieved by visibility.

2014-11-20  Arnaud Charlet  <charlet@adacore.com>

	* s-taspri-solaris.ads: Replace 64 by long_long_integer'size.

2014-11-20  Olivier Hainque  <hainque@adacore.com>

	* init.c (__gnat_map_signal for VxWorks): Use a common mapping
	scheme for VxWorks version >= 6, instead of falling back to the
	vx5 scheme for versions > 6.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* exp_strm.adb (Build_Mutable_Record_Read_Procedure): Use
	base type when constructing subtype indication for constrained
	target object.

2014-11-20  Jose Ruiz  <ruiz@adacore.com>

	* projects.texi: Minor spelling fix.

2014-11-20  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Add doc for --split-line-before-op switch in gnatpp.

2014-11-20  Vincent Celier  <celier@adacore.com>

	* prj-attr.adb (Register_New_Package): Allow the registration
	of an already unknown package and make it known.

2014-11-20  Trevor Saunders  <tsaunders@mozilla.com>

	* gcc-interface/decl.c, gcc-interface/utils.c: replace htab with
	hash_table.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Analyze_Pragma, case Elaborate): Forbid pragma
	Elaborate in SPARK mode.

2014-11-20  Bob Duff  <duff@adacore.com>

	* s-taskin.adb, s-tassta.adb (Initialize_ATCB): If Domain
	is null, then initialize T.Common.Domain to that of the
	activating task (not the parent task!), as required by RM-D.16.1.
	T.Common.Domain should never be null; so Assert. Remove similar
	code from Create_Task in s-tassta.adb.
	* s-mudido-affinity.adb: Remove checks for Domain = null,
	because it can't be null.
	* s-taskin.ads, s-taspri-dummy.ads, s-taspri-mingw.ads,
	s-taspri-posix.ads, s-taspri-posix-noaltstack.ads,
	s-taspri-solaris.ads, s-taspri-vxworks.ads: Mark limited types as
	explicitly limited for clarity.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* exp_aggr.adb (Init_Hidden_Discriminants): Code clean up.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* errout.adb (Error_Msg): Don't suppress continuation msgs for
	run-time files.
	* sem_prag.adb (Analyze_Pragma, case Elaborate): Forbid pragma
	Elaborate in SPARK mode.

2014-11-20  Yannick Moy  <moy@adacore.com>

	* gnat_rm.texi: Update GNAT RM with rule about expressions in
	Update attribute.

2014-11-20  Thomas Quinot  <quinot@adacore.com>

	* g-socket.adb (To_Host_Entry): Guard against case of a
	non-AF_INET entry.

2014-11-20  Vadim Godunko  <godunko@adacore.com>

	* a-strunb-shared.adb (To_Unbounded_String): Use shared empty
	object to construct return value when source string is empty or
	requested length is zero.
	* a-stwiun-shared.adb (To_Unbounded_Wide_String): Likewise.
	* a-stzunb-shared.adb (To_Unbounded_Wide_Wide_String): Likewise.

2014-11-20  Yannick Moy  <moy@adacore.com>

	* a-cfhase.adb, a-cfinve.adb, a-cforma.adb, a-cfhama.adb, a-cforse.adb,
	a-cofove.adb: Skip CodePeer analysis on body of all formal containers.

2014-11-20  Arnaud Charlet  <charlet@adacore.com>

	* adaint.c: Fix typo.
	* exp_util.adb (Make_Subtype_From_Expr): Complete previous change,
	generate constant values.
	* sem_eval.adb (Decompose_Expr): Fix latent bug leading to a wrong
	evaluation to '0' of some unknown values.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* repinfo.adb (List_Record_Info): Do not list discriminant in
	unchecked union.
	* sem_ch13.adb (Has_Good_Profile): Minor reformatting
	(Analyze_Stream_TSS_Definition): Minor reformatting
	(Analyze_Record_Representation_Clause): Do not issue warning
	for missing rep clause for discriminant in unchecked union.

2014-11-20  Vadim Godunko  <godunko@adacore.com>

	* a-strunb-shared.adb, a-stwiun-shared.adb, a-stzunb-shared.adb
	("&") Use already computed value of data length to call allocation
	subprogram.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch6.adb (Expand_Call, Inlined_Subprogram): Do not suppress
	debugging information for a call to a predefined unit, if the
	call comes from source and the unit is in the Ada hierarchy.

2014-11-20  Bob Duff  <duff@adacore.com>

	* s-mudido.ads: Update signature of Create and Get_Last_CPU. Add
	CPU_Set, another Create, and Get_CPU_Set.
	* s-mudido.adb: Corresponding changes to the spec. New
	operations just raise an exception.  Also minor cleanup: use
	raise_expressions.
	* s-mudido-affinity.adb: Implementations of new operations from
	* s-mudido.ads, for the platforms that actually support processor
	affinity. The new Create (which takes a set) now does all the
	work; the old Create (which takes a range) now just calls the
	new one. Change error messages to reflect the fact that it's an
	arbitrary set, not just a range.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb: Minor reformatting.

2014-11-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_util.adb (Make_Subtype_From_Expr): Capture the bounds of
	all index constracts when the expression is of an array type.

2014-11-20  Bob Duff  <duff@adacore.com>

	* s-taskin.ads: Minor comment improvements.

2014-11-20  Bob Duff  <duff@adacore.com>

	* exp_ch9.adb: Minor comment fixes.
	* s-taskin.adb (Initialize): Small simplification: pass System_Domain
	to Initialize_ATCB instead of passing null and then setting the Domain
	to System_Domain. This requires moving the creation of System_Domain
	earlier.
	* s-taprop-linux.adb (Set_Task_Affinity): Only call CPU_SET for
	processors that have a True in the Domain. This is necessary if the
	Domain is not all-True values.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Has_Good_Profile): a) An stream attribute
	for the class-wide type of an interface type is not a primitive
	operation and is not subject to the restrictions of 13.13. (38/3).
	b) A stream operation for an interface type must be a null
	procedure, and it cannot be a function.

2014-11-20  Bob Duff  <duff@adacore.com>

	* exp_attr.adb (Attribute_Max_Size_In_Storage_Elements):
	Eliminate 'Class references from the tree, because gigi crashes on
	'Class. Also, don't check Nkind (Attr) -- it is known to be
	N_Attribute_Reference.	Assert that instead.

2014-11-20  Bob Duff  <duff@adacore.com>

	* debug.adb: Minor comment fix.

2014-11-20  Arnaud Charlet  <charlet@adacore.com>

	* a-ciorma.adb: Minor update: move pragma Annotate up.
	* a-cfdlli.adb: Skip codepeer analysis on this body.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Analyze_Pragma, case No_Elaboration_Code_All):
	Allow use of this pragma with generic unit (package or subprogram).
	* gnat_rm.texi: Clarify that pragma No_Elaboration_Code_All can
	be applied to generics.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_aggr.adb (Valid_Limited_Ancestor): Ancestor part of
	extension aggregate can itself be an extension aggregate, as
	well as a call that is rewritten as a reference.

2014-11-20  Eric Botcazou  <ebotcazou@adacore.com>

	* inline.adb (Add_Inlined_Subprogram): Insert all programs
	generated as a body or whose declaration was provided along with
	the body.

2014-11-20  Javier Miranda  <miranda@adacore.com>

	* sem.adb (Semantics): Disable expansion if we are compiling a
	separate unit under configurable runtime. By default separate
	units are compiled with expansion disabled but under configurable
	runtime we enable the expansion to get error messages about
	missing entities.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb: Minor reformatting.
	* exp_util.adb (Following_Address_Clause): Handle case of
	package private part.

2014-11-20  Arnaud Charlet  <charlet@adacore.com>

	* a-cdlili.adb, a-cihama.adb, a-coinve.adb, a-cusyqu.adb, a-ciorse.adb,
	a-coorma.adb, a-cborma.adb, a-cidlli.adb, a-cimutr.adb, a-ciormu.adb,
	a-cbprqu.adb, a-cihase.adb, a-cohama.adb, a-coorse.adb, a-coboho.adb,
	a-cuprqu.adb, a-cbhama.adb, a-rbtgbo.adb, a-cborse.adb, a-comutr.adb,
	a-ciorma.adb, a-cobove.adb, a-coormu.adb, a-convec.adb, a-cohase.adb,
	a-coinho.adb, a-coinho-shared.adb, a-cbdlli.adb, a-cbsyqu.adb,
	a-cbmutr.adb, a-cbhase.adb: Add pragma Annotate to prevent codepeer
	from analyzing these bodies.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Do not apply
	inlining expansion if function build in place, i.e. has a limited
	return type.

2014-11-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Refined_Depends_In_Decl_Part): Add
	variables Body_Id, Body_Inputs, Body_Outputs, Spec_Inputs,
	Spec_Outputs. Synthesize the inputs and outputs of the subprogram
	when pragma [Refined_]Global is missing and perform legality
	checks on output states with visible refinement.
	(Appears_In): Update the comment on usage.
	(Check_Output_States): New routine.
	(Collect_Dependency_Clause): New routine.
	(Collect_Global_Items): Relocated to
	Analyze_Refined_Global_In_Decl_Part.
	(Collect_Subprogram_Inputs_Outputs): Add new formal parameters
	Synthesize and Depends_Seen. The routine can now synthesize inputs
	and outputs from pragma [Refined_]Depends.
	(Normalize_Clause): Update the comment on usage. The routine no longer
	performs normalization of outputs.
	(Normalize_Clauses): Normalize both inputs and outputs.
	(Normalize_Output): Relocated to Normalize_Clauses.
	* sem_prag.ads (Collect_Subprogram_Inputs_Outputs): Add new
	formal parameters Synthesize and Depends_Seen and update the
	comment on usage.

2014-11-20  Vincent Celier  <celier@adacore.com>

	PR ada/47500
	* back_end.adb (Scan_Back_End_Switches): Skip switch -G and
	its argument.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Reset_Loop_Variable): New subsidiary procedure
	in Build_Predicate_Functions, to handle properly quantified
	expressions in dynamic predicates.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* gnatcmd.adb, sem_ch6.adb, exp_dist.adb: Minor reformatting.
	* sem_util.adb (Bad_Unordered_Enumeration_Reference): Suppress
	warning (return False) for generic type.

2014-11-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_res.adb (Appears_In_Check): Removed.
	(Is_OK_Volatile_Context): Rewrite the checks which verify that
	an effectively volatile object subject to enabled properties
	Async_Writers or Effective_Reads appears in a suitable context to
	properly recognize a procedure call.
	(Within_Check): New routine.
	(Within_Procedure_Call): New routine.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb: Improve better error message.

2014-11-20  Thomas Quinot  <quinot@adacore.com>

	* freeze.adb, sem_ch13.adb: Minor editing.

2014-11-20  Vincent Celier  <celier@adacore.com>

	* gnatcmd.adb: Remove any special processing for the ASIS tools
	(gnatpp, gnatmetric, gnatcheck, gnatelim and gnatstup) and simply
	invoke the tool with the provided switches and arguments.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Expression_Function): Reject declaration
	of expression function with identical profile as previous
	expression function.

2014-11-20  Thomas Quinot  <quinot@adacore.com>

	* sem_ch13.adb: Complete previous change.
	* exp_dist.adb, exp_dist.ads: Rework PolyORB/DSA arguments processing
	circuitry to correctly handle the case of non-private limited
	unconstrained formals.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* freeze.adb, exp_dbug.adb, sem_ch13.adb: Minor reformatting.

2014-11-20  Thomas Quinot  <quinot@adacore.com>

	* einfo.ads: Fix minor typo in comment.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* inline.adb, sem_util.adb: Minor reformatting.

2014-11-20  Pierre-Marie Derodat  <derodat@adacore.com>

	* uintp.h (UI_Eq): Declare.
	* urealp.h (Norm_Den): Declare.
	(Norm_Num): Declare.
	* exp_dbug.adb (Is_Handled_Scale_Factor): New.
	(Get_Encoded_Name): Do not output ___XF GNAT encodings
	for fixed-point types when these can be handled by GCC's DWARF
	back-end.

2014-11-20  Thomas Quinot  <quinot@adacore.com>

	* sem_ch13.db (Inherit_Aspects_At_Freeze_Point): Inherit parent
	SSO even if set through a pragma Default_Scalar_Storage_Order.
	* freeze.adb (Set_SSO_From_Default): For a type extension,
	do not let the default SSO override the parent SSO.
	* gnat_rm.texi: document the above

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* a-stream.ads, a-reatim.ads, a-calend.ads, sinfo.ads, s-crtl.ads,
	interfac.ads, s-taskin.ads: Minor reformatting.

2014-11-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Extensions_Visible can now
	apply to an expression function.
	* sem_util.adb (Extensions_Visible_Status): Add special processing
	for expression functions.

2014-11-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* inline.adb (Build_Body_To_Inline): Remove meaningless aspects
	and pragmas.
	(Generate_Subprogram_Body): Remove meaningless aspects and pragmas.
	(Remove_Aspects_And_Pragmas): New routine.
	(Remove_Pragmas): Removed.
	* namet.ads, namet.adb (Nam_In): New versions of the routine.

2014-11-20  Thomas Quinot  <quinot@adacore.com>

	* sem_util.adb: Minor reformatting.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Analyze_Pragma, case Linker_Section): Detect
	duplicate Linker_Section.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch4.adb: Add guard for build-in-place boolean op.

2014-11-20  Yannick Moy  <moy@adacore.com>

	* checks.adb (Apply_Scalar_Range_Check): In GNATprove mode,
	put a range check when an empty range is used, instead of an
	error message.
	* sinfo.ads Update comment on GNATprove mode.

2014-11-20  Arnaud Charlet  <charlet@adacore.com>

	* a-stream.ads, s-osinte-linux.ads, a-reatim.ads, a-calend.ads,
	s-crtl.ads, interfac.ads, s-taskin.ads: Replace uses of 2 ** 63 and
	2 ** 64 by references to Long_Long_Integer instead, to allow these
	units to be analyzed by codepeer or spark when using a target
	configuration file with long_long_size set to 32.

2014-11-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_util.adb (Extensions_Visible_Status): Modify the logic to account
	for non-SPARK code.
	(Object_Access_Level): In ASIS mode, recognize
	a selected component with an implicit dereference so that it
	yields the same value with and without expansion.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Analyze_Pragma, case Implemented): In ASIS
	(compile-only) mode, use original type declaration to determine
	whether protected type implements an interface.

2014-11-20  Yannick Moy  <moy@adacore.com>

	* a-cfdlli.adb, a-cfdlli.ads, a-cfinve.adb, a-cfinve.ads,
	* a-cofove.adb, a-cofove.ads: Mark spec as SPARK_Mode, and private
	part/body as SPARK_Mode Off.
	* a-cfhama.adb, a-cfhama.ads, a-cfhase.adb, a-cfhase.ads,
	* a-cforma.adb, a-cforma.ads, a-cforse.adb, a-cforse.ads: Use
	aspect instead of pragma for uniformity.

2014-11-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_util.adb (Is_EVF_Expression): Include
	attributes 'Loop_Entry, 'Old and 'Update to the logic.

2014-11-20  Bob Duff  <duff@adacore.com>

	* sem_res.adb (Make_Call_Into_Operator): Don't
	call Left_Opnd in the case of unary operators, because they only
	have Right.

2014-11-20  Pascal Obry  <obry@adacore.com>

	* initialize.c (ProcListCS): New extern variable (critical section).
	(ProcListEvt): New extern variable (handle).
	(__gnat_initialize)[Win32]: Initialize the ProcListCS critical
	section object and the ProcListEvt event.
	* final.c (__gnat_finalize)[Win32]: Properly finalize the
	ProcListCS critical section and the ProcListEvt event.
	* adaint.c (ProcListEvt): New Win32 event handle.
	(EnterCS): New routine to enter the critical section when dealing with
	child processes chain list.
	(LeaveCS): As above to exit from the critical section.
	(SignalListChanged): Routine to signal that the chain process list has
	been updated.
	(add_handle): Use EnterCS/LeaveCS, also call SignalListChanged when the
	handle has been added.
	(__gnat_win32_remove_handle): Use EnterCS/LeaveCS,
	also call SignalListChanged if the handle has been found and removed.
	(remove_handle): Routine removed, implementation merged with the above.
	(win32_wait): Use EnterCS/LeaveCS for the critical section. Properly
	copy the PID list locally to ensure that even if the list is updated
	the local copy remains valid. Add into the hl (handle list) the
	ProcListEvt handle. This handle is used to signal that a change has
	been made into the process chain list. This is to ensure that a waiting
	call can be resumed to take into account new processes. We also make
	sure that if the handle was not found into the list we start over
	the wait call. Indeed another concurrent call to win32_wait()
	could already have handled this process.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Resolve_Actuals): The legality rule concerning
	the use of class-wide actuals for a non-controlling formal are
	not rechecked in an instance.

2014-11-20  Pascal Obry  <obry@adacore.com>

	* g-dirope.ads: Minor typo fix.

2014-11-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_attr.adb (Expand_N_Attribute_Reference,
	Expand_Update_Attribute): Preserve the tag of a prefix by offering
	a specific view of the class-wide version of the prefix.

2014-11-20  Javier Miranda  <miranda@adacore.com>

	* sem_ch6.adb (Analyze_Function_Return): For functions returning
	an access to an interface add an implicit conversion to the target
	type to force the displacement of the pointer to the object to
	reference the secondary dispatch table.
	(Check_Anonymous_Return): Skip internally built functions which handle
	the case of null access when locating the master of a task.
	* sem_res.adb (Valid_Conversion): Return true for internally
	generated conversions of access to interface types added to force
	the displacement of the pointer to reference the corresponding
	dispatch table.

2014-11-20  Pascal Obry  <obry@adacore.com>

	* adaint.c (add_handle): realloc with a size of +100.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Make_Call_Into_Operator): In ASIS mode, propagate
	back the resolved operands to the original call node, taking
	into account that the original call may have named associations.

2014-11-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* inline.adb (Has_Some_Contract): Change the
	guard to test the Ekind of the entity rather than the Analyzed
	flag. This handles partially analyzed contexts.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch8.adb (Analyze_Object_Renaming): In Ada 83 mode, do
	not reject the renaming of a function result if the renaming
	does not come for source.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* exp_util.ads: Minor addition of ??? clause.

2014-11-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb (Is_Variable): For an Ada 2012 implicit
	dereference introduced for an indexing opertion, check that the
	type of the corresponding access discriminant is not an access
	to constant.

2014-11-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch6.adb (Find_Corresponding_Spec): Inherit
	the ghostness of the matching spec, the same way convention
	is inherited.

2014-11-20  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_ch3.adb (Analyze_Object_Declaration): Swap a couple of
	tests in a condition so Following_Address_Clause is invoked
	only if need be.
	* exp_util.ads (Following_Address_Clause): Add small note.

2014-11-20  Pascal Obry  <obry@adacore.com>

	* adaint.c (remove_handle): New local routine without a lock.
	(win32_wait): fix the critical section to properly protect needed
	code, use new remove_handle.
	(__gnat_win32_remove_handle): refactor code with remove_handle.

2014-11-20  Eric Botcazou  <ebotcazou@adacore.com>

	* inline.adb (Analyze_Inlined_Bodies): Iterate between loading
	of the inlined bodies and instantiation of the generic bodies
	until no more bodies need to be loaded.

2014-11-20  Vincent Celier  <celier@adacore.com>

	* prj.adb, prj.ads, prj-conf.adb: Minor change of procedure name:
	Update_Ignore_Missing_With becomes Set_Ignore_Missing_With.

2014-11-20  Robert Dewar  <dewar@adacore.com>

	* exp_ch7.adb, sem_ch5.adb, sem_ch7.adb, sem_util.adb,
	sem_ch6.adb: Minor reformatting.

2014-11-20  Javier Miranda  <miranda@adacore.com>

	* exp_ch4.adb (Expand_N_Type_Conversion): Add missing implicit
	conversion to force the displacement of the pointer to the object
	to reference the secondary dispatch table.

2014-11-11  Simon Wright  <simon@pushface.org>

	PR ada/42978
	* mlib-utl.adb (ar): Output the options passed to ranlib.

2014-11-07  Arnaud Charlet  <charlet@adacore.com>

	* debug.adb, snames.adb-tmpl (Is_Keyword_Name): Consider 'overriding'
	a keyword in Ada 95 mode when -gnatd.D is used.
	* gnat_ugn.texi: Document -gnatd.D.

2014-11-07  Vasiliy Fofanov  <fofanov@adacore.com>

	* gnatls.adb: Lower severity of the program's return value in
	some common cases.

2014-11-07  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch10.adb (Decorate_Type): The limited view of a tagged
	type has an empty list of primitive operations.

2014-11-07  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Analyze_Object_Declaration): Update references to SPARK
	RM.
	(Process_Full_View): Update references to SPARK RM.
	* sem_ch6.adb (Analyze_Generic_Subprogram_Body): Update references
	to SPARK RM.
	(Analyze_Subprogram_Body_Helper): Update references
	to SPARK RM.
	* sem_ch7.adb (Analyze_Package_Body_Helper): Update references
	to SPARK RM.
	* sem_prag.adb (Check_Ghost_Constituent): Update references to
	SPARK RM.
	* sem_res.adb (Check_Ghost_Policy): Update references to SPARK RM.
	(Resolve_Actuals): Ensure that the actual parameter of a Ghost
	subprogram whose formal is of mode IN OUT or OUT is Ghost.
	* sem_util.adb (Check_Ghost_Completion): Update references to
	SPARK RM.

2014-11-07  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch7.adb (Make_Final_Call): If type of designated object is
	derived from that of the formal of the Deep_Finalize procedure,
	add an unchecked conversion to prevent spurious type error.

2014-11-07  Robert Dewar  <dewar@adacore.com>

	* table.adb, inline.adb, einfo.adb, gnat1drv.adb, exp_ch13.adb,
	exp_fixd.adb, prj-conf.adb, exp_strm.adb, a-cofove.adb, exp_ch3.ads:
	Minor reformatting.

2014-11-07  Robert Dewar  <dewar@adacore.com>

	* sem_ch12.adb, sem_ch13.adb, prj-tree.adb: Minor reformatting.

2014-11-07  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb (Set_Is_Checked_Ghost_Entity,
	Set_Is_Ignored_Ghost_Entity): Add exceptions to the assertion
	check.
	* sem_ch6.adb (Check_Conformance): Consider only
	source subprograms when checking for Ghost conformance.
	* sem_prag.adb (Analyze_Pragma): Handle the case
	where pragma Ghost applies to a stand alone subprogram body that
	acts as a compilation unit.
	* sem_res.adb: Minor reformatting (merge if statements).

2014-11-07  Ed Schonberg  <schonberg@adacore.com>

	* exp_strm.adb (Build_Record_Or_Elementary_Input_Function):
	Check whether underlying type is constrained before generating
	the object declaration for the result object of the function.

2014-11-07  Robert Dewar  <dewar@adacore.com>

	* freeze.adb: Code clean up.

2014-11-07  Yannick Moy  <moy@adacore.com>

	* a-cfdlli.ads, a-cfhama.ads, a-cfhase.ads, a-cfinve.ads,
	* a-cforma.ads, a-cforse.ads, a-cofove.ads: Mark First_To_Previous,
	Current_To_Last and Strict_Equal as Ghost.

2014-11-07  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb: Code clean up.

2014-11-07  Hristian Kirtchev  <kirtchev@adacore.com>

	* freeze.adb (Freeze_Entity): Issue an error regardless of the
	SPARK_Mode when a ghost type is effectively volatile.
	* sem_ch3.adb (Analyze_Object_Contract): Decouple the checks
	related to Ghost from SPARK_Mode.
	* sem_res.adb (Check_Ghost_Policy): Issue an error regardless
	of the SPARK_Mode when the Ghost policies do not match.
	* sem_util.adb (Check_Ghost_Completion): Issue an error regardless
	of the SPARK_Mode when the Ghost policies do not match.

2014-11-07  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Iterator_Specification): return if name
	in iterator does not have any usable aspect for iteration.

2014-11-07  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Null_Procedure): Reject a null procedure
	that there is a previous null procedure in scope with a matching
	profile.

2014-11-07  Hristian Kirtchev  <kirtchev@adacore.com>

	* atree.adb (Copy_Separate_Tree): Copy the aspect specifications.
	* inline.adb (Has_Some_Contract): Do the check only when the
	related entity has been analyzed.

2014-11-07  Ed Schonberg  <schonberg@adacore.com>

	* exp_fixd.adb (Expand_Multiply_Fixed_By_Fixed_Giving_Integer):
	If the restriction No_Floating_Point is in effect, and the
	operands have the same type, introduce a temporary to hold
	the fixed point result, to prevent the use of floating-point
	operations at run-time.

2014-11-07  Robert Dewar  <dewar@adacore.com>

	* freeze.adb (Check_Address_Clause): Minor reformatting
	(Find_Constant): Minor reformatting.
	(Freeze_Array_Type): Modify check for packed declarations.
	(Freeze_Entity): Minor reformatting.

2014-11-05  Eric Botcazou  <ebotcazou@adacore.com>

	* gnatvsn.ads (Library_Version): Bump to 5.0.

2014-11-05  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (Subprogram_Body_to_gnu): For a function with
	copy-in/copy-out parameters and which returns by invisible reference,
	do not create the variable for the return value; instead, manually
	generate the indirect copy out statements on exit.
	(gnat_to_gnu) <N_Simple_Return_Statement>: Adjust accordingly and build
	a simple indirect assignment for the return value.

2014-11-05  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <E_Record_Type>: For a
	derived untagged type that renames discriminants, be prepared for
	a type derived from a private discriminated type when changing the
	type of the stored discriminants.

2014-11-05  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (Handled_Sequence_Of_Statements_to_gnu): Set
	the SLOC of the node on the call to set_jmpbuf_address_soft emitted
	on block entry with SJLJ.

2014-11-05  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/utils.c (create_subprog_decl): Move code dealing with
	conflicting inlining status of nested subprograms to...
	* gcc-interface/trans.c (check_inlining_for_nested_subprog): ...here.
	(Attribute_to_gnu) <Attr_Access>: Call it.
	(Call_to_gnu): Likewise.
	(Subprogram_Body_to_gnu): Drop the body if it is an inlined external
	function that has been marked uninlinable.

2014-10-31  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.adb Add an entry for aspect Ghost in table
	Canonical_Aspect.
	* aspects.ads Add an entry for aspect Ghost in tables
	Aspect_Argument, Aspect_Delay, Aspect_Id, Aspect_Names and
	Implementation_Defined_Aspect.
	* einfo.adb: Flags 277 and 278 are now in use.
	(Is_Checked_Ghost_Entity): New routine.
	(Is_Ghost_Entity): Removed.
	(Is_Ghost_Subprogram): Removed.
	(Is_Ignored_Ghost_Entity): New routine.
	(Set_Is_Checked_Ghost_Entity): New routine.
	(Set_Is_Ignored_Ghost_Entity): New routine.
	(Write_Entity_Flags): Output flags Is_Checked_Ghost_Entity and
	Is_Ignored_Ghost_Entity.
	* einfo.ads: Add new flags Is_Checked_Ghost_Entity
	and Is_Ignored_Ghost_Entity along with usage in nodes.
	(Is_Checked_Ghost_Entity): New routine and pragma Inline.
	(Is_Ghost_Entity): Removed along with synthesized flag
	description and usage in nodes.
	(Is_Ghost_Subprogram): Removed along with synthesized flag description
	and usage in nodes.
	(Is_Ignored_Ghost_Entity): New routine and pragma Inline.
	(Set_Is_Checked_Ghost_Entity): New routine and pragma Inline.
	(Set_Is_Ignored_Ghost_Entity): New routine and pragma Inline.
	* freeze.adb (Freeze_Entity): A Ghost type cannot be effectively
	volatile.
	* par-prag.adb Pragma Ghost does not need special handling by
	the parser.
	* repinfo.adb (List_Mechanisms): Remove the entry for convention Ghost.
	* sem_attr.adb (Analyze_Access_Attribute): Remove obsolete check.
	* sem_ch3.adb (Analyze_Full_Type_Declaration): Mark
	the type as Ghost when its enclosing context is Ghost.
	(Analyze_Incomplete_Type_Decl): Mark the type as Ghost when
	its enclosing context is Ghost.
	(Analyze_Number_Declaration): Mark the number as Ghost when its
	enclosing context is Ghost.
	(Analyze_Object_Declaration): Mark the object as Ghost when its
	enclosing context is Ghost. Verify the Ghost policy between
	initial declaration and completion of a deferred constant.
	(Analyze_Object_Contract): A Ghost variable cannot be effectively
	volatile, imported or exported.
	(Build_Derived_Record_Type): Mark a type extension as Ghost when it
	implements a Ghost interface.
	(Build_Record_Type): Inherit volatility and "ghostness" from
	the parent type.
	(Check_Completion): A Ghost entity declared
	in a non-Ghost package does not require completion in a body.
	(Implements_Ghost_Interface): New routine.
	(Process_Full_View): Inherit "ghostness" from the partial view. Verify
	the Ghost policy between the partial and full views. Verify the
	completion of a Ghost type extension.
	* sem_ch4.adb (Check_Ghost_Subprogram_Call): Removed.
	* sem_ch5.adb (Analyze_Assignment): Analyze the left hand side first.
	* sem_ch6.adb (Analyze_Abstract_Subprogram_Declaration): Mark
	the subprogram as Ghost when its enclosing context is Ghost.
	(Analyze_Generic_Subprogram_Body): Mark the generic body as Ghost
	when its enclosing context is Ghost. Verify the Ghost policy
	between the spec and body.
	(Analyze_Subprogram_Body_Helper): Mark the body as Ghost when its
	enclosing context is Ghost. Verify the Ghost policy between the spec
	and body.
	(Check_Conformance): A Ghost subprogram profile and a non-Ghost
	subprogram profile are not subtype conformant.
	(Convention_Of): Removed.
	* sem_ch7.adb (Analyze_Package_Body_Helper): Inherit the
	"ghostness" from the spec. Verify the Ghost policy between
	the spec and body.
	(Analyze_Private_Type_Declaration): Mark the type as Ghost when its
	enclosing context is Ghost.
	(Requires_Completion_In_Body): New routine.
	(Unit_Requires_Body): Use Requires_Completion_In_Body.
	(Unit_Requires_Body_Info): Rename formal parameter P to Pack_Id, update
	comment on usage and all uses of P in the body. Use
	Requires_Completion_In_Body.
	* sem_ch7.ads (Unit_Requires_Body): Rename formal parameter P
	to Pack_Id, update comment on usage and all uses of P in the body.
	* sem_ch8.adb (Analyze_Exception_Renaming): Inherit the "ghostness"
	from the renamed excention.
	(Analyze_Generic_Renaming): Inherit the "ghostness" from the
	renamed generic subprogram.
	(Analyze_Object_Renaming): Inherit the "ghostness" from the renamed
	object.
	(Analyze_Package_Renaming): Inherit the "ghostness" from the
	renamed package.
	(Analyze_Subprogram_Renaming): Inherit the "ghostness" from the
	renamed subprogram.
	* sem_ch11.adb (Analyze_Exception_Declaration): Mark an exception
	as Ghost when its enclosing context is Ghost.
	* sem_ch12.adb (Analyze_Generic_Package_Declaration,
	Analyze_Generic_Subprogram_Declaration): Mark an exception as
	Ghost when its enclosing context is Ghost.
	(Preanalyze_Actuals): Remove obsolete check.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Add processing
	for aspect Ghost.
	(Check_Aspect_At_Freeze_Point): Aspects
	Depends and Global do no need special checking at freeze point.
	(Insert_After_SPARK_Mode): Update comment on usage.
	* sem_mech.adb (Set_Mechanisms): Remove the entry for convention Ghost.
	* sem_prag.adb Add an entry for pragma Ghost in table Sig_Flags.
	(Analyze_Abstract_State): Update the grammar of the pragma. Add
	formal parameter Pack_Id along with comment on usage. Mark an
	abstract state as Ghost when its enclosing context is Ghost. Add
	processing for option Ghost.
	(Analyze_Constituent): Verify
	that a Ghost abstract state is refined by Ghost constituents.
	(Analyze_Pragma): "Ghost" is now a valid policy. Add checks
	related to the use and placement of Check_Policy Ghost. Add
	processing for pragma Ghost.
	(Check_Ghost_Constituent): New routine.
	(Is_Valid_Assertion_Kind): "Ghost" is now a valid assertion.
	(Process_Convention): Remove obsolete check.
	(Set_Convention_From_Pragma): Remove the processing for convention
	Ghost.
	* sem_res.adb (Check_Ghost_Context): New routine.
	(Resolve_Call): Verify that a reference to a Ghost entity appears in a
	suitable context. Verify the Ghost polity between point of declaration
	and point of use.
	(Resolve_Entity_Name): Verify that a reference to
	a Ghost entity appears in a suitable context. Verify the Ghost
	polity between point of declaration and point of use.
	* sem_util.adb (Check_Ghost_Completion): New routine.
	(Check_Ghost_Derivation): New routine.
	(Incomplete_Or_Partial_View): New routine.
	(Incomplete_Or_Private_View): Removed.
	(Is_Ghost_Entity): New routine.
	(Is_Ghost_Statement_Or_Pragma): New routine.
	(Is_Subject_To_Ghost): New routine.
	(Policy_In_Effect): New routine.
	(Set_Is_Ghost_Entity): New routine.
	(Within_Ghost_Scope): New routine.
	* sem_util.ads (Check_Ghost_Completion): New routine.
	(Check_Ghost_Derivation): New routine.
	(Incomplete_Or_Partial_View): New routine.
	(Incomplete_Or_Private_View): Removed.
	(Is_Ghost_Entity): New routine.
	(Is_Ghost_Statement_Or_Pragma): New routine.
	(Is_Subject_To_Ghost): New routine.
	(Policy_In_Effect): New routine.
	(Set_Is_Ghost_Entity): New routine.
	(Within_Ghost_Scope): New routine.
	* snames.adb-tmpl (Get_Convention_Id): Remove the entry for
	convention Ghost.
	(Get_Convention_Name): Remove the entry for convention Ghost.
	* snames.ads-tmpl Remove the convention id for Ghost. Add a
	pragma id for Ghost.

2014-10-31  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi: Add description of --RTS option for ASIS tools.

2014-10-31  Olivier Hainque  <hainque@adacore.com>

	* gcc-interface/Makefile.in (arm-vxworks): Update target pairs.

2014-10-31  Vincent Celier  <celier@adacore.com>

	* prj-part.adb (Parse_Single_Project): Call Set_Display_Name_Of.
	* prj-proc.adb (Recursive_Process): Call Display_Name_Of to
	get the project Display_Name.
	* prj-tree.adb (Display_Name_Of): New function
	(Set_Display_Name_Of): New procedure.
	(Create_Project): Call Set_Display_Name_Of.
	* prj-tree.ads (Display_Name_Of): New function.
	(Set_Display_Name_Of): New procedure.
	(Project_Node_Record): New component Display_Name.
	(Project_Name_And_Node): Remove component Display_Name.
	* prj-conf.adb (Parse_Project_And_Apply_Config): Use the full
	Config_File_Path as the Config_File_Name, not just its simple
	name.

2014-10-31  Thomas Quinot  <quinot@adacore.com>

	* get_scos.adb: Minor reformatting.

2014-10-31  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch5.adb (Expand_Formal_Container_Loop): Create block to
	capture declaration for cursor to prevent spurious errors when
	several formal iterators that use the same cursoe name appear
	in the same context.

2014-10-31  Vincent Celier  <celier@adacore.com>

	* prj-proc.adb (Recursive_Process): Make sure that the project
	display name is never No_Name.

2014-10-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Analyze_Access_Attribute): Do not emit error
	message if reference does not come from source, as in the case
	for the controlling argument of a dispatching call. Error is
	diagnosed when call is resolved.
	* sem_ch4.adb (Complete_Object_Operation); Fix incorrect RM
	reference in error message.
	* sem_res.adb (Check_Prefixed_Call): ditto.

2014-10-31  Yannick Moy  <moy@adacore.com>

	* sem_prag.adb (Process_Restrictions_Or_Restriction_Warnings): Do not
	suppress checks when pragma Restrictions (No_Exception) is used in
	CodePeer or GNATprove mode.

2014-10-31  Yannick Moy  <moy@adacore.com>

	* gnat1drv.adb (Adjust_Global_Switches): Explicitly mark language
	checks as not suppressed in GNATprove mode.

2014-10-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_elab.adb (Check_Elab_Call): Nothing to check if call is
	being pre-analyzed.
	* sem_ch3.adb (Complete_Private_Subtype): If all rep items of full
	view are those of the base, use rep_item chain of partial view,
	which may include aspects.
	* sem_cat.adb (Is_non_Remote_Access_Type): Use underlying type
	of base type, to handle properly declared subtypes.

2014-10-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Analyze_Generic_Package_Declaration): If there
	is a default storage pool, add a corresponding aspect to the
	generic unit, to be used at the point of instantiation.
	(Analyze_Package_Instantiation): If generic unit has aspect
	specifications, propagate them to instance. If instance has a
	Default_Storage_Pool aspect, make sure that it overrides the
	one that may be inherited from the generic.

2014-10-31  Vincent Celier  <celier@adacore.com>

	* prj-attr.adb: Minor removal of attributes of package Linker
	that have never been used and never been documented.
	* projects.texi: Add documentation for attribute Runtime.
	* prj-nmsc.adb (Check_Configuration): Do not report a warning
	for unknown compilers when the project is externally built.

2014-10-31  Vasiliy Fofanov  <fofanov@adacore.com>

	* prj-conf.adb (Do_Autoconf): Refactor the code so that empty
	Normalized_Pathname doesn't inhibit the custom Selected_Target
	value.
	* prj-conf.adb (Parse_Project_And_Apply_Config): Make sure that
	Automatically_Generated is correctly set after the first call
	to Process_Project_And_Apply_Config and not modified after the
	second call, if any.

2014-10-31  Yannick Moy  <moy@adacore.com>

	* Makefile.rtl, gnat_rm.texi, impunit.adb: Add mention of new library
	files.
	* a-cfinve.adb, a-cfinve.ads: New unit for formal indefinite
	vectors, suitable for use in client SPARK code, also more
	efficient than the standard vectors.
	* a-coboho.adb, a-coboho.ads New unit for bounded holders, that
	are used to define formal indefinite vectors in terms of formal
	definite ones.
	* a-cofove.adb, a-cofove.ads: Simplification of the API of formal
	definite vectors, similar to the API of the new indefinite ones. A
	new formal parameter of the generic unit called Bounded allows
	to define growable vectors that use dynamic allocation.

2014-10-31  Vincent Celier  <celier@adacore.com>

	* prj-conf.adb (Look_For_Project_Paths): New procedure
	(Parse_Project_And_Apply_Config): Initially, parse the project
	files ignoring missing withs. If there are missing withs, extend
	the project path with directories rooted at the compiler roots,
	including directories rooted at the runtime roots, if there are
	non default runtimes, in the PATH orser.
	* prj-env.adb (Initialize_Default_Project_Path): Do not add
	any directory from the prefix if the target is "-".
	* prj-part.adb (Parse): Initialize the tables, as Parse may be
	call several times by gprbuild.
	* prj.adb (Update_Ignore_Missing_With): New procedure.

2014-10-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_aux.adb (First_Stored_Discriminant,
	Has_Completely_Hidden_Discriminant): When scanning the list of
	discriminants to locate possibly hidden (inherited) discriminants,
	ignore itypes that may appear in the entity list, when an access
	discriminants is constrained by an access attribute reference.

2014-10-31  Javier Miranda  <miranda@adacore.com>

	* freeze.adb (Freeze_Record_Type): Add missing
	check to verify that all the primitives of an interface type
	are abstract or null procedures.

2014-10-31  Vincent Celier  <celier@adacore.com>

	* s-os_lib.adb, s-os_lib.ads: New function Non_Blocking_Spawn that
	redirects standard output and standard error to two different files.

2014-10-31  Bob Duff  <duff@adacore.com>

	* makeutl.ads: Minor comment fix.

2014-10-31  Arnaud Charlet  <charlet@adacore.com>

	* system-linux-x86_64.ads, system-mingw-x86_64.ads (Word_Size,
	Memory_Size): Use Standard'Word_Size so that the value can be changed
	via a target configuration file.

2014-10-31  Eric Botcazou  <ebotcazou@adacore.com>

	* exp_ch4.adb: Minor tweak.

2014-10-31  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_ch12.adb (Analyze_Package_Instantiation): Do not inline with
	back-end inlining.
	(Must_Inline_Subp): Delete.
	* sem_util.ads, sem_util.adb (Must_Inline): Likewise.

2014-10-31  Ed Schonberg  <schonberg@adacore.com>

	* freeze.adb (Freeze_Entity): A default_pool does not apply to
	internal access types generated for 'access references.
	* sem_prag (Analyze_Pragma, case Default_Pool): If the name is
	not null it must designate a variable.

2014-10-31  Eric Botcazou  <ebotcazou@adacore.com>

	* inline.adb: Minor reformatting.

2014-10-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Build_Derived_Private_Type): If the derived
	type has access discriminants, create itype references for their
	anonymous types, so that they are elaborated before the generated
	bodies for the primitive operations of the type.

2014-10-31  Tristan Gingold  <gingold@adacore.com>

	* prj-conf.adb (Locate_Runtime): Remove procedure.

2014-10-31  Eric Botcazou  <ebotcazou@adacore.com>

	* inline.adb (Has_Excluded_Declaration): With back-end inlining,
	only return true for nested packages.
	(Cannot_Inline): Issue errors/warnings whatever the optimization level
	for back-end inlining and remove assertion.

2014-10-31  Sergey Rybin  <rybin@adacore.com frybin>

	* table.adb (Tree_Read, Tree_Write): Use parentheses to specify
	the desired order of '*' and '/' operations to avoid overflow.

2014-10-31  Eric Botcazou  <ebotcazou@adacore.com>

	* exp_ch6.adb (Do_Inline): Remove unreachable code.
	(Do_Inline_Always): Likewise.

2014-10-31  Vincent Celier  <celier@adacore.com>

	* prj-nmsc.adb (Check_Stand_Alone_Library): Change error message
	when library has no Ada interfaces and Library_Standalone is
	declared.

2014-10-31  Arnaud Charlet  <charlet@adacore.com>

	* sem_ch13.adb (Check_Constant_Address_Clause): Disable checks
	on address clauses in CodePeer mode.

2014-10-31  Javier Miranda  <miranda@adacore.com>

	* inline.adb (Expand_Inlined_Call): Do not skip
	inlining of calls to subprogram renamings.

2014-10-31  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_res.adb (Resolve_Entity_Name): Account for
	the case where the immediate parent of a reference to an entity
	is a parameter association.

2014-10-31  Eric Botcazou  <ebotcazou@adacore.com>

	* inline.adb (Check_And_Split_Unconstrained_Function): Do not
	test for the presence of nested subprograms.

2014-10-31  Ed Schonberg  <schonberg@adacore.com>

	* aspects.ads, aspects.adb: Add aspect Default_Storage_Pool.
	* sem_ch13.adb (Analyze_One_Aspect): Generate pragma for aspect
	Default_Storage_Pool.

2014-10-31  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_ch6.adb: Remove obsolete comment.

2014-10-31  Olivier Hainque  <hainque@adacore.com>

	* g-allein.ads: bind vec_sld for pixels to 8hi vsldoi instead
	of 4si, as pixels are short.

2014-10-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Resolve_Call): Do not reject a call to a protected
	operation in the spec of a protected type, when the call appears
	in a pre/postcondition for another protected operation.

2014-10-31  Tristan Gingold  <gingold@adacore.com>

	* prj-conf.adb: Locate_Runtime: Always search the runtime in
	project path.

2014-10-31  Eric Botcazou  <ebotcazou@adacore.com>

	* inline.adb (Check_Package_Body_For_Inlining): Adjust previous
	change to use correct idiom for back-end inlining.

2014-10-31  Ed Schonberg  <schonberg@adacore.com>

	* freeze.adb (Freeze_Record_Type): Do not check component size
	if its type is generic.

2014-10-31  Bob Duff  <duff@adacore.com>

	* gnat_rm.texi: Fix documentation w.r.t -gnatw.w.

2014-10-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Try_Container_Indexing): Use Check_Implicit_Dereference.
	* sem_util.adb (Check_Implicit_Dereference): a)	Handle generalized
	indexing as well as function calls.  b)  If the context is a
	selected component and whe are in an instance, remove entity from
	selector name to force resolution of the node, so that explicit
	dereferences can be generated in the instance if they were in
	the generic unit.

2014-10-31  Eric Botcazou  <ebotcazou@adacore.com>

	* inline.adb (Back_End_Cannot_Inline): Delete.
	(Add_Inlined_Subprogram): Do not call it.

2014-10-31  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.ads (Make_Tag_Assignment): New function, used to
	re-initialize the tag in a tagged object declaration with
	initial value.
	* exp_ch3.adb (Expand_N_Object_Declaration): Use
	Make_Tag_Assignment to simplify code for a tagged object
	declaration.
	* exp_ch13.adb (Expand_Freeze_Entity): Analyze freeze actions
	for the freeze node of an object.
	* freeze.adb (Check_Address_Clause): Use Make_Tag_Assignment when
	needed to extend Freeze_Actions for a tagged object declaration.

2014-10-31  Eric Botcazou  <ebotcazou@adacore.com>

	* gnat_ugn.texi: Further minor improvement to -flto entry.

2014-10-31  Gary Dismukes  <dismukes@adacore.com>

	* g-dynhta.adb, g-dynhta.ads: Minor typo fixes and reformatting.

2014-10-30  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Expand_N_Object_Declaration): Code cleanup.

2014-10-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Iterator_Specification): If a subtype
	indication is provided, check properly that it covers the element
	type of of the container type.

2014-10-30  Hristian Kirtchev  <kirtchev@adacore.com>

	* g-dynhta.ads, g-dynhta.adb: Add the implementation of a load facto
	-based hash table.

2014-10-30  Ed Schonberg  <schonberg@adacore.com>

	* exp_util.ads, exp_util.adb (Following_Address_Clause): Modify
	Has_Following_Address_Clause so that it returns the address
	clause if present, rather than a boolean value.
	* sem_ch3.adb (Analyze_Object_Declaration): use
	Following_Address_Clause.
	* exp_ch3.adb (Expand_N_Object_Declaration): When a tagged object
	is initialized, insert tag assignment after object is frozen,
	which may be after an address clause that follows the declaration.

2014-10-30  Tristan Gingold  <gingold@adacore.com>

	* system-darwin-x86.ads, system-linux-s390x.ads, system-linux-alpha.ads,
	system-vxworks-arm.ads, system-freebsd-x86_64.ads,
	system-linux-hppa.ads, system-linux-s390.ads,
	system-solaris-sparcv9.ads, system-mingw.ads, system-linux-ia64.ads,
	system-vxworks-sparcv9.ads, system-linux-ppc.ads, system-aix64.ads,
	system-linux-sh4.ads, system-solaris-x86.ads, system-linux-x86_64.ads,
	system-linux-x86.ads, system-vxworks-ppc.ads, system-hpux.ads,
	system-linux-armel.ads, system-darwin-ppc.ads, system-solaris-sparc.ads,
	system-vxworks-m68k.ads, system-hpux-ia64.ads, system.ads,
	system-solaris-x86_64.ads, system-mingw-x86_64.ads,
	system-vxworks-mips.ads, system-linux-sparc.ads, system-freebsd-x86.ads,
	system-aix.ads, system-darwin-x86_64.ads, system-vxworks-x86.ads: Add
	pragma No_Elaboration_Code_All.

2014-10-30  Eric Botcazou  <ebotcazou@adacore.com>

	* gnat_ugn.texi: Minor improvement to -flto entry.

2014-10-30  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_util.adb (Inherit_Subprogram_Contract):
	Add a guard to protect against enumeration literal overriding.
	* sem_ch3.adb, sem_ch4.adb, sem_res.adb, sem_util.adb:
	Minor reformatting (add SPARK RM references).

2014-10-30  Robert Dewar  <dewar@adacore.com>

	* exp_dbug.adb, opt.ads: Minor reformatting.

2014-10-30  Yannick Moy  <moy@adacore.com>

	* inline.adb (Has_Single_Return_In_GNATprove_Mode):
	Return False when return statement is inside one or more blocks.

2014-10-30  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch7.adb (Is_Subprogram_Call): Account for the case where an
	object declaration initialized by a function call that returns
	an unconstrained result may be rewritted as a renaming of the
	secondary stack result.

2014-10-30  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.adb: Add an entry for aspect Extensions_Visible in
	table Canonical_Aspect.
	* aspects.ads: Add entry for aspect Extensions_Visible in
	tables Aspect_Argument, Aspect_Delay, Aspect_Id, Aspect_Names,
	Implementation_Defined_Aspect.
	* einfo.adb (Get_Pragma): Include pragma Extensions_Visible in
	the list of contract pragmas.
	* par-prag.adb Pragma Extensions_Visible does not require special
	processing from the parser.
	* sem_ch3.adb (Analyze_Object_Declaration): Prevent an
	implicit class-wide conversion of a formal parameter
	of a specific tagged type whose related subprogram is
	subject to pragma Extensions_Visible with value "False".
	(Check_Abstract_Overriding): Add various overriding checks
	related to pragma Extensions_Visible.
	(Derive_Subprogram):
	A subprogram subject to pragma Extensions_Visible with value
	False requires overriding if the subprogram has at least one
	controlling OUT parameter.
	(Is_EVF_Procedure): New routine.
	* sem_ch4.adb (Analyze_Type_Conversion): A formal parameter of
	a specific tagged type whose related subprogram is subject to
	pragma Extensions_Visible with value "False" cannot appear in
	a class-wide conversion.
	* sem_ch6.adb (Analyze_Subprogram_Contract): Remove
	the assertion to account for pragma Extensions_Visible.
	(Check_Overriding_Indicator): An overriding subprogram
	inherits the contact of the overridden subprogram.
	(New_Overloaded_Entity): An overriding subprogram inherits the
	contact of the overridden subprogram.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Add processing
	for aspect Extensions_Visible.
	(Check_Aspect_At_Freeze_Point): Aspect Extensions_Visible does not
	require special processing at the freeze point.
	* sem_prag.adb Add an entry for pragma Extensions_Visible in
	table Sig_Flags.
	(Analyze_Pragma): Ensure that various SPARK
	pragmas lack identifiers in their arguments. Add processing for
	pragma Extensions_Visible.
	(Chain_CTC): Code reformatting.
	* sem_res.adb (Resolve_Actuals): A formal parameter of a
	specific tagged type whose related subprogram is subject to
	pragma Extensions_Visible with value "False" cannot act as an
	actual in a subprogram with value "True".
	* sem_util.adb (Add_Classification): New routine.
	(Add_Contract_Item): Account for pragma Extensions_Visible. Code
	reformatting.
	(Add_Contract_Test_Case): New routine.
	(Add_Pre_Post_Condition): New routine.
	(Extensions_Visible_Status): New routine.
	(Inherit_Subprogram_Contract): New routine.
	(Is_EVF_Expression): New routine.
	(Is_Specific_Tagged_Type): New routine.
	* sem_util.ads Add type Extensions_Visible_Mode and document all values.
	(Add_Contract_Item): Add pragma Extensions_Visible to the
	comment on usage.
	(Inherit_Subprogram_Contract): New routine.
	(Is_EVF_Expression): New routine.
	(Is_Specific_Tagged_Type): New routine.
	* sinfo.adb (Is_Inherited): New routine.
	(Set_Is_Inherited): New routine.
	* sinfo.ads Add flag Is_Inherited along with its usage in
	nodes.
	(Is_Inherited): New routine along with pragma Inline.
	(Set_Is_Inherited): New routine along with pragma Inline.
	* snames.ads-tmpl: Add predefined name "Extensions_Visible"
	and a new Pragma_Id for the pragma.

2014-10-30  Vincent Celier  <celier@adacore.com>

	* prj-proc.adb (Process_Case_Construction): Do not look for
	the ultimate extending project for a case variable.

2014-10-30  Pierre-Marie Derodat  <derodat@adacore.com>

	* exp_dbug.adb, opt.ads (GNAT_Encodings): Import from C. Define
	enumerators.
	(gnat_encodings): Define a dummy variable for the AAMP back-end.
	(Get_Encoded_Name): When -fgnat-encodings=all|gdb, encode names
	for all discrete types whose bounds do not match size and do so
	only for biased types when -fgnat-encodings=minimal.
	* gcc-interface/decl.c (gnat_to_gnu_entity): Do not create ___XA
	parallel types when array bounds are constant while the lower bound is
        not 1.  Also stop generating them because the bound type is
        larger than sizetype.
	* gcc-interface/misc.c (gnat_encodings): New.

2014-10-30  Thomas Quinot  <quinot@adacore.com>

	* opt.adb (Set_Opt_Config_Switches): For an internal unit,
	always reset Default_SSO to ' '.

2014-10-30  Thomas Quinot  <quinot@adacore.com>

	* freeze.adb (Freeze_Record_Type): Set SSO from default before
	checking SSO consistency.

2014-10-30  Javier Miranda  <miranda@adacore.com>

	* inline.adb (Check_Package_Body_For_Inlining):
	Cleanup this subprogram to implement exactly the behavior
	documented in the spec.

2014-10-30  Hristian Kirtchev  <kirtchev@adacore.com>

	* a-comutr.adb, a-cimutr.adb (Insert_Child): Add new variable First.
	Update the position after all insertions have taken place.

2014-10-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Analyze_Pragma, case License): Do not perform
	analysis of pragma arguments when in CodePeer mode, pragma has
	different format on other compilers.

2014-10-30  Thomas Quinot  <quinot@adacore.com>

	* s-os_lib.adb: Minor reformatting.

2014-10-29  Richard Sandiford  <richard.sandiford@arm.com>

	* gcc-interface/decl.c, gcc-interface/gigi.h, gcc-interface/misc.c,
	gcc-interface/trans.c, gcc-interface/utils.c, gcc-interface/utils2.c:
	Remove redundant enum from machine_mode.

2014-10-28  Andrew MacLeod  <amacleod@redhat.com>

	* gcc-interface/trans.c: Adjust include files.
	* gcc-interface/utils.c: Ditto.

2014-10-27  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/utils.c (create_subprog_decl): Adjust condition.

2014-10-27  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/misc.c (gnat_init_options_struct): Parameterize errno
	support here instead of...
	Do not set flag_delete_dead_exceptions to 1 unconditionally.
	(gnat_init_gcc_eh): Set flag_delete_dead_exceptions to 1.
	(gnat_init_gcc_fp): ...here.

2014-10-27  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (gnat_to_gnu) <N_Real_Literal>: Minor tweaks.

2014-10-27  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/utils.c (create_var_decl_1): For a variable declared
	in the unit, set TREE_PUBLIC only if it has static storage duration.

2014-10-27  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity): Apply special treatment
	of derived packed array types to constrained subtypes only.

2014-10-27  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <E_Array_Type>: Remove
	superfluous computation for the max size.
	<E_Array_Subtype>: Likewise.  Make sure that the max size calculation
	does not overflow at compile time.

2014-10-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_eval.adb (Check_Non_Static_Context): Do not set
	Is_Machine_Number on a literal of a fixed-point type.

2014-10-23  Robert Dewar  <dewar@adacore.com>

	* mlib-prj.adb, sem_ch4.adb, exp_ch3.adb: Minor reformatting.

2014-10-23  Pierre-Marie Derodat  <derodat@adacore.com>

	* exp_dbug.ads: Update ___XA parallel type specification.

2014-10-23  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Copy_Array_Subtype_Attributes): Inherit the rep
	chain of the source type.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Minor
	reformatting of an error message.
	* sem_util.adb (Inherit_Rep_Item_Chain): Do not inherit a rep
	chain that has been inherited already.

2014-10-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Expression_Function): Simplify analysis
	in generic context, and generate body in this case as well,
	to simplify ASIS traversals on the construct.

2014-10-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Complete_Object_Operation): Indicate that the
	scope of the operation (s) is referenced, to prevent spurious
	warnings about unused units.

2014-10-23  Johannes Kanig  <kanig@adacore.com>

	* errout.adb (Error_Msg_Internal): Copy check flag, increment
	check msg count.
	* erroutc.adb (Delete_Msg) adjust check msg count.
	(Output_Msg_Text) handle check msg case (do nothing).
	(Prescan_Message) recognize check messages with severity prefixes.
	* errutil.adb (Error_Msg) handle check flag, adjust counter.

2014-10-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_eval.adb (Subtypes_Statically_Match): For a generic actual
	type, check for the presence of discriminants in its parent type,
	against the presence of discriminants in the context type.

2014-10-23  Tristan Gingold  <gingold@adacore.com>

	* adaint.c: __gnat_get_file_names_case_sensitive: Default is
	true on arm-darwin.

2014-10-23  Arnaud Charlet  <charlet@adacore.com>

	* pprint.adb (Expression_Image): Add handling of quantifiers.

2014-10-23  Ed Schonberg  <schonberg@adacore.com>

	* exp_pakd.adb (Expand_Packed_Element_Reference): If the
	prefix is a source entity, generate a reference to it before
	transformation, because rewritten node might not generate a
	proper reference, leading to spurious warnings.

2014-10-23  Tristan Gingold  <gingold@adacore.com>

	* init.c: Fix thinko in previous patch.

2014-10-23  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Decimal_Fixed_Point_Type_Declaration):
	Inherit the rep chain of the implicit base type.
	(Floating_Point_Type_Declaration): Inherit the rep chain of the
	implicit base type.
	(Ordinary_Fixed_Point_Type_Declaration): Inherit the rep chain of the
	implicit base type.
	(Signed_Integer_Type_Declaration): Inherit the rep chain of the
	implicit base type.
	* sem_util.ads, sem_util.adb (Inherit_Rep_Item_Chain): New routine.

2014-10-23  Pascal Obry  <obry@adacore.com>

	* g-regist.adb, g-regist.ads: Add support for reading 32bit or 64bit
	view of the registry.

2014-10-23  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Expand_N_Object_Declaration): If type is abstract,
	return without expanding expression, to prevent subsequent crash.
	* freeze.adb: better error message for illegal declaration.

2014-10-23  Hristian Kirtchev  <kirtchev@adacore.com>

	* sysdep.c (__gnat_localtime_tzoff): Properly delimit the
	substring which represents the time zone on VxWorks.

2014-10-23  Vincent Celier  <celier@adacore.com>

	* gnatls.adb: If --RTS= was not used, check if there is a default
	runtime. If there is none, in verbose mode, indicate that the
	default runtime is not available and show only the current
	directory in the source and the object search paths.

2014-10-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Process_Formals): A thunk procedure with a
	parameter of a limited view does not need a freeze node.

2014-10-23  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch7.adb (Analyze_Package_Body_Helper):
	The logic which hides local entities from external
	visibility is now contained in routine Hide_Public_Entities.
	(Hide_Public_Entities): New routine. Object and subprogram
	renamings are now hidden from external visibility the same way
	objects are.

2014-10-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Analyze_Attribute): The prefix of attribute Elaborated
	does not require freezing, in particular if it denotes a generic
	function.

2014-10-23  Yannick Moy  <moy@adacore.com>

	* sem_prag.adb (Analyze_Pragma/Pragma_Inline & Pragma_Inline_Always):
	Disable analysis in GNATprove mode.

2014-10-23  Arnaud Charlet  <charlet@adacore.com>

	* mlib-prj.adb: Remove obsolete references to libdecgnat (VMS only).

2014-10-23  Arnaud Charlet  <charlet@adacore.com>

	* gnat1drv.adb (Adjust_Global_Switches): Ignore style check
	pragmas in codepeer mode.

2014-10-23  Gary Dismukes  <dismukes@adacore.com>

	* gnat_rm.texi: Minor syntax fix for pragma Annotate (missing ',').

2014-10-23  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch12.adb (Inline_Instance_Body): Alphabetize
	local variables and constants. Add constants Save_SM and Save_SMP
	to capture SPARK_Mode-related attributes.  Compile the inlined
	body with the SPARK_Mode of the enclosing context.

2014-10-23  Hristian Kirtchev  <kirtchev@adacore.com>

	* sinfo.adb (Elaboration_Boolean): Removed.
	(Set_Elaboration_Boolean): Removed.
	* sinfo.ads Remove attribute Elaboration_Boolean along with its
	occurrence in nodes.
	(Elaboration_Boolean): Removed along with pragma Inline.
	(Set_Elaboration_Boolean): Removed along with pragma Inline.

2014-10-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Constant_Redeclaration): Make error message more
	explicit on a deferred constant whose object_definition is an
	anonymous array.

2014-10-23  Vincent Celier  <celier@adacore.com>

	* gnatls.adb: Never call Targparm.Get_Target_Parameters.

2014-10-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Expression_Function): In a generic
	context do not create a body, and only pre-analyze the expression,
	which may include incomplete views.

2014-10-23  Robert Dewar  <dewar@adacore.com>

	* sem_type.adb: Minor code reorganization (use Nkind_In, Ekind_In).
	* sem_ch3.adb: Minor reformatting.

2014-10-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Analyze_Associations): If an actual for a formal
	object is a call to a parameterless expression function, add
	the function to the list of actuals to freeze.
	* freeze.adb (Check_Expression_Function): Create freeze nodes of
	outer types that may be references in the body of the expression.

2014-10-23  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_util.ads, checks.ads: Minor comment reformatting.

2014-10-23  Javier Miranda  <miranda@adacore.com>

	* sem_eval (Test_In_Range): Disable removal of range_check for
	VM targets.

2014-10-23  Robert Dewar  <dewar@adacore.com>

	* erroutc.adb (Validate_Specific_Warnings): Fix test for -W
	messages, which got disabled when we unconditionally added an
	asterisk at the start of the string.

2014-10-23  Vincent Celier  <celier@adacore.com>

	* gnatls.adb: Ensure that "gnatls -l" works even when there is
	no default runtime.

2014-10-23  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_ch3.adb (Build_Derived_Private_Type): When the parent is
	untagged and has discriminants, build the implicit full view after
	building the derived type. Capture original declaration and type
	here instead of...
	(Copy_And_Build): ...here.
	* sem_type.adb (Full_View_Covers): Handle the Underlying_Full_View.

2014-10-23  Hristian Kirtchev  <kirtchev@adacore.com>

	* checks.adb (Ensure_Valid): Update the subprogram
	profile. Propagate the contex attributes to Insert_Valid_Check.
	(Insert_Valid_Check): Update the subprogram profile. Propagate
	the attributes of the context to Duplicate_Subexpr_No_Checks.
	(Validity_Check_Range): Update the subprogram profile. Propagate
	the context attribute to Ensure_Valid.
	* checks.ads (Ensure_Valid): Update the subprogram profile
	along with the comment on usage.
	(Insert_Valid_Check): Update the subprogram profile along with the
	comment on usage.
	(Validity_Check_Range): Update the subprogram profile along with
	the comment on usage.
	* exp_util.adb (Build_Temporary): New routine.
	(Duplicate_Subexpr_No_Checks): Update the subprogram
	profile. Propagate the attributes of the context to Remove_Side_Effects.
	(Remove_Side_Effects): Update the subprogram profile. Update all calls
	to Make_Temporary to invoke Build_Temporary.
	* exp_util.ads (Duplicate_Subexpr_No_Checks): Update
	the subprogram profile along with the comment on usage.
	(Remove_Side_Effects): Update the subprogram profile along with
	the comment on usage.
	* sem_ch3.adb (Process_Range_Expr_In_Decl): Pass the subtype
	to the validity check machinery.  Explain the reason for this
	propagation.

2014-10-23  Robert Dewar  <dewar@adacore.com>

	* a-strsea.adb: Minor reformatting.

2014-10-23  Thomas Quinot  <quinot@adacore.com>

	* bcheck.adb (Check_Consistent_SSO_Default): Exclude internal
	units from consistency check.
	* gnat_rm.texi (Default_Scalar_Storage_Order): Document that
	consistency check excludes run-time units.

2014-10-23  Ed Schonberg  <schonberg@adacore.com>

	* a-strsea.adb (Find_Token): Enable constraint checking in this
	procedure, so that even when compiling with checks suppressed, as is
	the case for the run-time, an exception is raised in this routine when
	the input meets the conditions described in RM 2005 A.4.3 (68/1).

2014-10-20  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_ch3.adb (Build_Derived_Private_Type): When the parent
	is untagged and has discriminants, build the implicit full
	view even if the derived type is a completion, and make it
	the Underlying_Full_View of the type.
	(Copy_And_Build): Fix Is_Completion actual parameter in the calls to
	Build_Derived_Type.
	(Build_Derived_Record_Type): Likewise.

2014-10-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb: Add guard to convention setting.

2014-10-20  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, prj-proc.adb, prj-proc.ads, prj-conf.adb: Minor
	reformatting.

2014-10-20  Robert Dewar  <dewar@adacore.com>

	* par-prag.adb (Add_List_Pragma_Entry): New procedure.
	* par.adb (P_Pragma): Document requirement to handle multiple calls.

2014-10-20  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Analyze_Pragma, case No_Elaboration_Code_All):
	Fix error of bad inheritance of this pragma from with'ed unit.

2014-10-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Inherit_Aspects_At_Freeze_Point): For a subtype,
	inherit convention from parent type, because the subtype may
	have been declared on a partial view, prior to the pragma on
	the parent.

2014-10-20  Olivier Hainque  <hainque@adacore.com>
	    Tristan Gingold  <gingold@adacore.com>

	* gcc-interface/Makefile.in: Handle arm-darwin and VxWorks 7.
	Misc clean ups.

2014-10-20  Nicolas Roche  <roche@adacore.com>

	* gcc-interface/Make-lang.in: ensure that automatically generated
	dependency are referencing generated gnatvsn rather than original
	one.

2014-10-20  Gary Dismukes  <dismukes@adacore.com>

	* gnat_ugn.texi: Minor reformatting.
	* sem_ch3.adb: Minor reformatting.

2014-10-20  Vincent Celier  <celier@adacore.com>

	* prj-attr.adb: New project level attribute Runtime.
	* prj-conf.adb (Get_Project_Runtimes): New procedure to get
	the attributes Runtime declared in the main project, to use
	in auto-configuration.
	(Get_Or_Create_Configuration_File): Call Get_Project_Runtimes.
	* prj-proc.adb (Runtime_Defaults): New table to store
	the default values of attributes Runtime (<language>).
	(Set_Default_Runtime_For): New procedure to store the default
	value of a Runtime (<language>) in table Runtime_Defaults.
	(Expression): Use the value stored in table Runtime_Defaults as
	the default for Runtime (<language>).
	* prj-proc.ads (Set_Default_Runtime_For): New procedure.
	* prj.ads (Attribute_Default_Value): New enumerated value
	Runtime_Value.

2014-10-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Analyze_Object_Declaration): If the type is
	an unconstrained unchecked_union type, rewrite declaration
	as a renaming to prevent attempt to retrieve non- existent
	discriminants from expression.

2014-10-20  Ed Schonberg  <schonberg@adacore.com>

	* gnat_ugn.texi: Minor reformatting.

2014-10-20  Tristan Gingold  <gingold@adacore.com>

	* init.c (__gnat_is_stack_guard): Don't use mach_vm_region_recurse on
	arm-darwin.
	* raise-gcc.c: Add ATTRIBUTE_UNUSED to remove warnings for
	unused arguments.

2014-10-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_attr.adb (Analyze_Attribute): Replace
	variables CS and PS with Proc_Id and Subp_Id to better illustrate
	their purpose. Account for the case where _Postconditions
	has not been generated yet and the context is aspect/pragma
	Refined_Post. In that scenario the expected prefix of attribute
	'Result is the current scope.

2014-10-20  Robert Dewar  <dewar@adacore.com>

	* par-ch4.adb (P_Expression): Handle extraneous comma/semicolon
	in middle of expression with logical operators.

2014-10-20  Robert Dewar  <dewar@adacore.com>

	* par-ch13.adb (Possible_Misspelled_Aspect): New function.

2014-10-20  Steve Baird  <baird@adacore.com>

	* pprint.adb: Improve Expression_Image function.

2014-10-20  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document No_Tagged_Streams pragma and aspect.
	* snames.ads-tmpl: Add entry for pragma No_Tagged_Streams.
	* aspects.ads, aspects.adb: Add aspect No_Tagged_Streams.
	* einfo.adb (No_Tagged_Streams_Pragma): New field.
	* einfo.ads: Minor reformatting (reorder entries).
	(No_Tagged_Streams_Pragma): New field.
	* exp_ch3.adb: Minor comment update.
	* opt.ads (No_Tagged_Streams): New variable.
	* par-prag.adb: Add dummy entry for pragma No_Tagged_Streams.
	* sem.ads (Save_No_Tagged_Streams): New field in scope record.
	* sem_attr.adb (Check_Stream_Attribute): Check stream ops
	prohibited by No_Tagged_Streams.
	* sem_ch3.adb (Analyze_Full_Type_Declaration): Set
	No_Tagged_Streams_Pragma.
	(Analyze_Subtype_Declaration): ditto.
	(Build_Derived_Record_Type): ditto.
	(Record_Type_Declaration): ditto.
	* sem_ch8.adb (Pop_Scope): Restore No_Tagged_Streams.
	(Push_Scope): Save No_Tagged_Streams.
	* sem_prag.adb (Analyze_Pragma, case No_Tagged_Streams): Implement new
	pragma.

2014-10-20  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, prj-proc.adb, sem_ch4.adb, prj-env.adb, lib.ads,
	sem_ch13.adb: Minor reformatting.

2014-10-20  Javier Miranda  <miranda@adacore.com>

	* exp_ch3.adb (Expand_N_Object_Declaration): Expand the
	declaration of a class-wide limited object containing an
	initializing expression into a renaming declaration.  Required to
	avoid passing such declaration to the backend and also to avoid
	generating an extra copy.

2014-10-20  Eric Botcazou  <ebotcazou@adacore.com>

	* inline.adb (List_Inlining_Info): Minor tweaks.
	(Add_Inlined_Body): Inline the enclosing package
	if it is not internally generated, even if it doesn't come
	from source.

2014-10-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Process_Function_Call): If the first actual
	denotes a discrete type, the mode must be interpreted as a slice
	of an array returned by a parameterless call.

2014-10-20  Vasiliy Fofanov  <fofanov@adacore.com>

	* prj-env.ads, prj-env.adb (Get_Runtime_Path): No longer inhibit
	searching for runtime referenced by a simple name on a project path.

2014-10-20  Olivier Hainque  <hainque@adacore.com>

	* vxworks-x86-link.spec: New file.
	* system-vxworks-x86.ads: Add pragma Linker_Options to link with
	vxworks-x86-link.spec.

2014-10-20  Vincent Celier  <celier@adacore.com>

	* opt.ads (Origin_Of_Target): New type.
	(Target_Origin): New variable.
	* prj-conf.adb (Parse_Project_And_Apply_Config): Record
	Target_Value and Target_Origin.  If target was not specified
	on the command line with --target=, check if attribute Target
	is declared in the main project. If it is and it is not the
	native target, parse again the projects so that 'Target get
	the new value. Fail if the target has changed again.  Invoke
	Process_Project_And_Apply_Config with Do_Phase_1 set to False
	is Process_Project_Tree_Phase_1 has already been invoked.
	* prj-conf.ads (Process_Project_And_Apply_Config): New Boolean
	parameter Do_Phase_1, defaulted to True.
	* prj-proc.adb (Expression): Check the special values and
	defaults for attribute Target.

2014-10-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Handle_Late_Controlled_Primitive): Do not analyze
	the subprogram spec of the body in full, because it will be
	reanalyzed when the declaration itself is analyzed;  otherwise. a
	formal may end up duplicated in the list of formals leading to
	spurious conformance errors with an existing declaration.

2014-10-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb: Improve error recovery on illegal aspect.

2014-10-20  Arnaud Charlet  <charlet@adacore.com>

	* set_targ.adb (Write_Target_Dependent_Values, Write_Line):
	Fix calling C APIs with no trailing NUL char by calling better
	wrappers instead.

2014-10-20  Tristan Gingold  <gingold@adacore.com>

	* gnat_ugn.texi: Document that gdb users must be in group
	_developer on mac os.

2014-10-20  Arnaud Charlet  <charlet@adacore.com>

	* a-tgdico.ads: Fix typo.

2014-10-20  Ed Schonberg  <schonberg@adacore.com>

	* exp_aggr.adb (Convert_To_Assignments): Do not create a
	transient scope for a component whose type requires it, if the
	context is an initialization procedure, because the target of
	the assignment must be visible outside of the block.

2014-10-20  Tristan Gingold  <gingold@adacore.com>

	* tracebak.c: Define PC_ADJUST for arm-darwin.
	* env.c: Remove darwin specific code.
	* raise-gcc.c (__gnat_Unwind_ForcedUnwind): Error on arm-darwin.

2014-10-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Analyze_Full_Type_Declaration): If previous view
	is incomplete rather than private, and full type declaration
	has aspects, analyze aspects on the full view rather than
	the incomplete view, to prevent freezing anomalies with the
	class-wide type.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* exp_ch9.adb (Expand_N_Task_Body): Add defense against
	previous errors.
	* freeze.adb (Freeze_Entity): Add defense against checking null
	scope for generic.
	* restrict.adb (Tasking_Allowed): Add test for No_Run_Time mode.
	* sem_ch13.adb (Freeze_Entity_Checks): Add defense against
	previous errors.
	* sem_ch9.adb (Analyze_Task_Type_Declaration): Give error if
	in No_Run_Time mode.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* prj-makr.adb: Minor reformatting.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* gnatcmd.adb, make.adb, prj-part.adb, gnatlink.adb, prj-nmsc.adb,
	prj-conf.adb, prj-env.adb: Use Is_Directory_Separator where possible.

2014-10-17  Ed Schonberg  <schonberg@adacore.com>

	* exp_prag.adb (Undo_Initialization): If Initialize_Scalars
	is enabled, code will be generated for some composite types
	to initialize an object after its declaration. If there is
	a subsequent Import pragma for the object, that code must be
	removed as specified byw the semantics of the pragma, and to
	prevent out-of-order elaboration issues in the back-end.

2014-10-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Expand_N_Op_Concat): Keep concatenation operator
	wrapping mechanism under debug flag -gnatd.h.
	* debug.adb: Claim debug switch -gnatd.h.

2014-10-17  Doug Rupp  <rupp@adacore.com>

	* gcc-interface/Makefile.in: Enable the socket runtime bits
	for Android.

2014-10-17  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Add_Invariants, Replace_Type_References): Do
	not perform the replacement on the expression for an inherited
	class-wide invariant if in ASIS_Mode and the type reference is
	already the prefix of a 'Class attribute reference: the expression
	has already been preanalyzed and the replacement performed when
	first encountered on the declaration of the parent type.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* sem_ch5.adb, sem_ch7.adb, prj-nmsc.adb, sem_ch13.adb, exp_ch3.adb:
	Minor reformatting.

2014-10-17  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Build_Component_Invariant_Call): Retrieve Invariant
	subprogram from base type.
	* sem_ch7.adb (Analyze_Package_Specification): Build invariant
	subprogram for private type, not any of its subtypes.
	* sem_ch13.adb (Build_Invariant_Procedure_Declaration): Set type
	of procedure entity, because a call to it may be generated in
	a client unit before the corresponding subprogram declaration
	is analyzed.

2014-10-17  Vincent Celier  <celier@adacore.com>

	* prj-nmsc.adb (Get_Directories): Do not create directories
	when a project is abstract.

2014-10-17  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Iterator_Specification): If the domain
	of iteration is given by an expression that is not an array type,
	verify that its type implements an iterator iterface.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* sem_attr.adb (Eval_Attribute): Ensure that attribute
	reference is not marked as being a static expression if the
	prefix evaluation raises CE.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* exp_pakd.adb: Move bit packed entity tables to spec.
	* exp_pakd.ads: Move bit packed entity tables here from body.
	* freeze.adb (Freeze_Array_Type): Check that packed array type
	is supported.
	* rtsfind.adb (PRE_Id_Table): New table (Entity_Not_Defined):
	Specialize messages using PRE_Id_Table.
	* uintp.ads, uintp.adb (UI_Image): New functional form.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* aspects.ads, aspects.adb: Add Suppress_Initialization aspect.
	* einfo.ads, einfo.adb (Suppress_Initialization): Now applies to
	E_Variable.
	* exp_ch3.adb (Default_Initialize_Object): Handle
	Suppress_Initialization.
	* exp_prag.adb (Expand_Pragma_Suppress_Initialization): New
	procedure (Expand_N_Pragma): Handle Suppress_Initialization
	(Expand_Pragma_Import_Or_Interface): Use Undo_Initialization
	(Undo_Initialization): New procedure.
	* sem_prag.adb (Analyze_Pragma, case Suppress_Initialization):
	This is now allowed for E_Variable case.
	* gnat_rm.texi: Document new aspect Suppress_Initialization
	Suppress_Initialization aspect/pragma can apply to variable.
	* einfo.ads: Minor reformatting.

2014-10-17  Arnaud Charlet  <charlet@adacore.com>

	* spark_xrefs.ads: Add documentation pointer to Flow_Computed_Globals.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* cstand.adb (Create_Standard): Mark Short_Integer as
	implementation defined.
	* sem_util.adb (Set_Entity_With_Checks): Avoid blow up for
	compiler built with assertions for No_Implementation_Identifiers test.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* aspects.ads: Documentation fix, aspect Lock_Free does have a
	corresponding pragma.
	* gnat_rm.texi: Document implementation defined boolean aspects
	as boolean.

2014-10-17  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Add_Invariants): For a class-wide type invariant,
	preserve semantic information on the invariant expression
	(typically a function call) because it may be inherited by a
	type extension in a different unit, and it cannot be resolved
	by visibility elsewhere because it may refer to local entities.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document that string literal can be used for
	pragma Warnings when operating in Ada 83 mode.

2014-10-17  Ed Schonberg  <schonberg@adacore.com>

	* freeze.adb (Find_Aggregate_Component_Desig_Type): New
	subsidiary function to Freeze_ Expression, used to determine
	whether an aggregate for an array of access types also freezes the
	designated type, when some aggregate components are allocators.

2014-10-17  Ed Schonberg  <schonberg@adacore.com>

	* a-strsea.adb (Find_Token): AI05-031 indicates that the
	procedure must raise Index_Error when Source is not empty and
	the From parameter is not within the range of the Source string.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Is_Static_String_Expression): Allow string
	literal in Ada 83 mode.

2014-10-17  Vincent Celier  <celier@adacore.com>

	* prj-conf.adb (Get_Config_Switches): In CodePeer mode, do
	not take into account any compiler command from package IDE.

2014-10-17  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Build_Function_Wrapper): The formals of the
	wrapper must have the same identifiers as those of the formal
	subprogram, because calls within the generic may use named
	associations.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, a-strsea.adb: Minor reformatting.
	* par-ch6.adb (P_Subprogram): Fix bad handling of null procedures.

2014-10-17  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Build_Derived_Enumeration_Type): Propagate aspect
	specfications from original type declaration to declaration of
	implicit base, because original node is rewritten as a subtype
	declaration on which type aspects do not belong.

2014-10-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Propagate_Default_Init_Cond_Attributes): A derived type
	inherits the attributes related to pragma Default_Initial_Condition
	from its parent type.

2014-10-17  Ed Schonberg  <schonberg@adacore.com>

	* a-strsea.adb (Index - versions with a From parameter):
	According to AI05-056, the Index functions with a From parameter
	return 0 if the source is an empty string.

2014-10-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Refined_Depends_In_Decl_Part): Disable
	the consistency checks in ASIS mode.

2014-10-17  Arnaud Charlet  <charlet@adacore.com>

	* s-expmod.ads: Minor typo fix.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb: Minor reformatting.

2014-10-17  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Build_Function_Wrapper): Build wrappers for
	actuals that are defaulted subprograms of the formal subprogram
	declaration.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb (Expand_N_Op_Eq): Make sure we deal with the
	implementation base type.
	* sinfo.ads: Add a note for N_Op_Eq and N_Op_Ne that record
	operands are always expanded out into component comparisons.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* s-vallli.adb: Minor comment correction.
	* s-valuti.ads: Minor comment reformatting.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document System.Atomic_Counters.
	* impunit.adb: Add System.Atomic_Counters (s-atocou.ads) to the
	list of user- accessible units added as children of System.
	* s-atocou.ads: Update comment.

2014-10-17  Arnaud Charlet  <charlet@adacore.com>

	* s-expmod.ads: Add comments.

2014-10-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Build_Derived_Record_Type): Remove the propagation
	of all attributes related to pragma Default_Initial_Condition.
	(Build_Derived_Type): Propagation of all attributes related
	to pragma Default_Initial_Condition.
	(Process_Full_View): Account for the case where the full view derives
	from another private type and propagate the attributes related
	to pragma Default_Initial_Condition to the private view.
	(Propagate_Default_Init_Cond_Attributes): New routine.
	* sem_util.adb: Alphabetize various routines.
	(Build_Default_Init_Cond_Call): Use an unchecked type conversion
	when calling the default initial condition procedure of a private type.
	(Build_Default_Init_Cond_Procedure_Declaration): Prevent
	the generation of multiple default initial condition procedures.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* prj-conf.adb: Revert previous change.

2014-10-17  Robert Dewar  <dewar@adacore.com>

	* lib-writ.ads, s-valdec.ads: Minor reformatting.

2014-10-17  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb: Additional work on function wrappers.

2014-10-17  Eric Botcazou  <ebotcazou@adacore.com>

	* exp_util.adb (Possible_Bit_Aligned_Component): Also recurse
	on the renamed object of renamings.

2014-10-17  Vincent Celier  <celier@adacore.com>

	* prj-conf.adb (Parse_Project_And_Apply_Config): In CodePeer
	mode, always use the native target.

2014-10-16  Andrew MacLeod  <amacleod@redhat.com>

	* gcc-interface/misc.c: Adjust include files.

2014-10-13  Eric Botcazou  <ebotcazou@adacore.com>
            Alan Modra  <amodra@gmail.com>

	PR ada/63225
	* uintp.adb (Vector_To_Uint): Move from here to...
	* uintp.ads (UI_Vector): Make public.
	(Vector_To_Uint): ...here.

2014-10-10  Robert Dewar  <dewar@adacore.com>

	* freeze.adb, sem_attr.adb: Minor reformatting.

2014-10-10  Johannes Kanig  <kanig@adacore.com>

	* a-cfdlli.ads, a-cfhama.ads, a-cfhase.ads, a-cforma.ads,
	a-cforse.ads, a-cofove.ads: add "Default_Initial_Condition"
	to container type.

2014-10-10  Vincent Celier  <celier@adacore.com>

	* prj-conf.adb (Do_Autoconf): In Codepeer mode, do not try to get
	any configuration switches from the project file.

2014-10-10  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Build_Wrapper): Renamed as Build_Operator_Wrapper.
	(Build_Function_Wrapper): New function, to construct a wrapper
	function for actuals that are functions with an arbitrary
	number of parameters. Used in GNATProve mode to simplify proof
	propagation in instantiations.

2014-10-10  Robert Dewar  <dewar@adacore.com>

	* freeze.adb, gnat1drv.adb, sem_ch13.adb: Minor reformatting and
	code clean up.

2014-10-10  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_res.adb (Is_OK_Volatile_Context): Allow
	a volatile object reference to appear as the expression of a
	type conversion.

2014-10-10  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications, Library_Unit_Aspects):
	Aspect specification is legal on a local instantiation of a
	library-level generic unit.

2014-10-10  Gary Dismukes  <dismukes@adacore.com>

	* gnat1drv.adb (Adjust_Global_Switches): Set Front_End_Inlining
	if inlining has been enabled via -gnatn and the target is not GCC.

2014-10-10  Ed Schonberg  <schonberg@adacore.com>

	* freeze.adb (Freeze_Entity): Freezing a subprogram does
	not always freeze its profile.	In particular, an attribute
	reference that takes the access type does not freeze the types
	of the formals.

2014-10-10  Robert Dewar  <dewar@adacore.com>

	* errout.adb (Adjust_Name_Case): New procedure.
	(Set_Msg_Node): Use Adjust_Name_Case.
	* errout.ads (Adjust_Name_Case): New procedure.
	* exp_intr.adb (Add_Source_Info): Minor code reorganization
	(use Ekind_In).
	(Write_Entity_Name): Use Errout.Adjust_Name_Case.
	* sem_prag.adb (Is_Non_Significant_Pragma_Reference): Review
	and fix up entries in Sig_Flags, and correct logical errors in
	function itself.
	* sprint.adb (Sprint_Node_Actual): Properly print string for
	raise statement.

2014-10-10  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Analyze_Object_Declaration): For an object of an
	anonymous array type with delayed aspects, defer freezing of
	type until object itself is frozen.
	* freeze.adb (Freeze_Entity): When freezing an object of an
	anonymous array type with delayed aspects, remove freeze node of
	object after freezing type, to prevent out-of-order elaboration
	in the back-end. The initialization call for the object has
	already been constructed when expanding the object declaration.

2014-10-10  Robert Dewar  <dewar@adacore.com>

	* exp_intr.adb (Write_Entity_Name): Moved to outer level
	(Write_Entity_Name): Properly handle operator names
	(Expand_Source_Info): New procedure.
	* exp_intr.ads (Add_Source_Info): New procedure.

2014-10-10  Robert Dewar  <dewar@adacore.com>

	* butil.ads: Minor reformatting.
	* sem_ch5.adb: Code clean up.

2014-10-10  Robert Dewar  <dewar@adacore.com>

	* exp_ch11.adb (Expand_N_Raise_Statement): Handle
	Prefix_Exception_Messages.
	* opt.adb: Handle new flags Prefix_Exception_Message[_Config].
	* opt.ads: New flags Prefix_Exception_Message[_Config].
	* par-prag.adb: New dummy entry for pragma Prefix_Exception_Messages.
	* snames.ads-tmpl: Add entries for new pragma Prefix_Exception_Messages.
	* sem_prag.adb: Implement new pragma Prefix_Exception_Messages
	* gnat_rm.texi: Document pragma Prefix_Exception_Messages.

2014-10-10  Gary Dismukes  <dismukes@adacore.com>

	* sinfo.ads, gnat_ugn.texi, a-except.adb, a-except-2005.adb,
	raise-gcc.c Spelling changes (prolog => prologue, epilog => epilogue).

2014-10-10  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Is_Wrapped_In_Block): Handle properly blocks that
	contain pragmas generated for loop invariants and type predicates.
	Clarify use of this subprogram.

2014-10-10  Yannick Moy  <moy@adacore.com>

	* sem_prag.adb (Analyze_Global_Item): Accept formal objects in Global
	contracts.
	* errout.adb, errout.ads (SPARK_Msg_NE): Issue error unless
	SPARK_Mode is Off.

2014-10-10  Vadim Godunko  <godunko@adacore.com>

	* a-stwima.adb (To_Sequence): Compute size of result array.

2014-10-10  Javier Miranda  <miranda@adacore.com>

	* gnat_ugn.texi (Interfacing with C++ at the Class Level): Update the
	sources of the example to avoid a warning when the Ada files are
	automatically generated by the binding generator.

2014-10-10  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Resolve_Attribute, case 'Update): Set
	Do_Range_Check on the expression of a record component
	association when needed, as is done for array components, when
	the corresponding type is a scalar type.

2014-10-10  Gary Dismukes  <dismukes@adacore.com>

	* a-coinho-shared.adb: Minor typo fix.
	* prj-env.ads: Minor reformatting.

2014-10-10  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_res.adb (Resolve_String_Literal): Do not
	generate a string literal subtype for the default expression of
	a formal parameter in GNATprove mode.

2014-10-10  Yannick Moy  <moy@adacore.com>

	* errout.adb (SPARK_Msg_N): Issue error unless SPARK_Mode is Off.

2014-10-10  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch5.adb (Expand_Formal_Container_Element_Loop): Analyze
	declaration for loop parameter before rest of loop, and set
	entity kind to prevent assignments to it in the user code.
	* sem_ch3.adb (Analyze_Object_Contract): No contracts apply to the
	loop parameter in an element iteration over o formal container.

2014-10-10  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Document use of user-level routines to handle
	e.g. col major arrays.

2014-10-10  Doug Rupp  <rupp@adacore.com>

	* s-osinte-android.adb: Fix misspelling.
	* gsocket.h: Tweak the Android quirks.

2014-10-10  Robert Dewar  <dewar@adacore.com>

	* errout.ads (SPARK_Msg_N): Fix spec to match change in body.

2014-10-10  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb: Minor code reorganization.

2014-10-10  Pat Rogers  <rogers@adacore.com>

	* gnat_rm.texi: Text now indicates pragma No_Run_Time is not
	for users.

2014-10-10  Vadim Godunko  <godunko@adacore.com>

	* a-coinho-shared.adb: Add minor comment.
	* a-stzmap.adb (To_Sequence): Compute size of result array.

2014-10-10  Javier Miranda  <miranda@adacore.com>

	* exp_ch3.adb (Build_Init_Procedure): Complete the condition of an
	if-stmt to match its current documentation.

2014-10-10  Robert Dewar  <dewar@adacore.com>

	* sem_ch7.adb, einfo.adb, einfo.ads, sem_prag.adb, sem_ch12.adb,
	freeze.adb, sem_util.adb, sem_res.adb, exp_ch6.adb, exp_ch13.adb,
	sem_ch6.adb, sem_cat.adb, sem_disp.adb
	(Is_Subprogram_Or_Generic_Subprogram): New primitive. Use this primitive
	throughout where appropriate.

2014-10-10  Bob Duff  <duff@adacore.com>

	* a-coinho-shared.ads: Minor reformatting.
	* s-traceb.adb: Minor clean up.

2014-10-10  Robert Dewar  <dewar@adacore.com>

	* ali.adb (Scan_ALI): Read and process new GP flag on ALI P line.
	* ali.ads (GNATprove_Mode): New component in ALI table.
	(GNATprove_Mode_Specified): New global.
	* gnatbind.adb (Gnatbind): Give fatal error if any file compiled
	in GNATProve mode.
	* lib-writ.ads, lib-writ.adb (GP): New flag on P line for
	GNATProve_Mode.

2014-10-10  Javier Miranda  <miranda@adacore.com>

	* exp_ch3.adb (Build_Init_Procedure): Adding assertion.
	(Build_Init_Statement): Ensure that statements
	associated with the parent components are located at the beginning
	of the returned list of statements.

2014-10-10  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Inherit_Aspects_At_Freeze_Node): If the full
	view of a private type T that has a type invariant is a scalar
	or constrained array type, the base type created for the full
	view has the same type invariant.

2014-10-10  Robert Dewar  <dewar@adacore.com>

	* exp_util.ads, sem_ch12.adb, exp_util.adb, i-fortra.ads: Minor code
	reorganization.

2014-09-22  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity): Adjust comment.
	* gcc-interface/utils.c (gnat_write_global_declarations): Fix typo.

2014-09-15  Jakub Jelinek  <jakub@redhat.com>

	* gcc-interface/Make-lang.in (check_acats_numbers0,
	check_acats_numbers1, check_acats_numbers2, check_acats_numbers3,
	check_acats_numbers4, check_acats_numbers5, check_acats_numbers6,
	check_acats_numbers, check_acats_subdirs): New variables.
	(check_acats_targets): Use $(check_acats_subdirs).
	(check-acats, check-acats%): Rewritten so that for parallelized
	testing each job runs all the chapters files, with
	GCC_RUNTEST_PARALLELIZE_DIR set in environment.  Prepare the support
	directory sequentially and share it.
	(check-acats-subtargets): Always print just check-acats.

2014-08-25  Martin Liska  <mliska@suse.cz>

	* gcc-interface/utils.c (rest_of_subprog_body_compilation): Adjust to
	new cgraph interface.
	(gnat_write_global_declarations): Likewise.

2014-08-13  Sylvestre Ledru  <sylvestre@debian.org>

	* 9drpc.adb: Fix a typo
	* s-interr.ads: Likewise
	* s-taskin.ads: Likewise
	* s-traces.ads: Likewise
	* sysdep.c: Likewise

2014-08-12  Joel Sherrill <joel.sherrill@oarcorp.com>

	* socket.c: For RTEMS, use correct prototype of gethostbyname_r().
	* gsocket.h Add include of <unistd.h> on RTEMS.

2014-08-11  Joel Sherrill <joel.sherrill@oarcorp.com>

	* s-osinte-rtems.adb: Correct formatting of line in license block.

2014-08-04  Claire Dross  <dross@adacore.com>

	* exp_util.adb (Get_First_Parent_With_Ext_Axioms_For_Entity):
	For an instance, look at the scope before the generic parent.

2014-08-04  Yannick Moy  <moy@adacore.com>

	* lib-writ.ads: Update comments.
	* sem_disp.ads, sem_disp.adb (Inherited_Subprograms): Add
	parameters to filter inherited subprograms.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Add section on use of address clause for memory
	mapped I/O.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Analyze_Subtype_Declaration): A subtype, in
	particular the subtype created for a generic actual, inherits
	invariant information from the base type.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* aspects.ads, aspects.adb: Add entries for aspect Obsolescent.
	* gnat_rm.texi: Add documentation for aspect Obsolescent.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Implement aspect
	Obsolescent.
	(Check_Aspect_At_Freeze_Point): Add dummy entry for pragma Obsolescent.
	* s-osprim-mingw.adb: Minor reformatting.
	* sem_res.adb (Is_Atomic_Ref_With_Address): New function
	(Resolve_Indexed_Component): Rework warnings for non-atomic access
	(Resolve_Selected_Component): Add warnings for non-atomic access.

2014-08-04  Doug Rupp  <rupp@adacore.com>

	* g-calend.adb (timeval_to_duration, duration_to_timeval): Change sec
	formal to long_long.
	* g-calend.ads (timeval): Bump up size to accomodate sec type.
	* s-taprop-linux.adb (timeval_to_duration): Change sec formal to
	long_long
	* s-osprim-posix.adb (timeval): Bump up size to accomodate
	new sec type.
	(timeval_to_duration): Change sec formal to Long_Long_Integer
	* s-osinte-darwin.adb (timeval): Bump up
	size to accomodate new sec type.
	(timeval_to_duration): Change sec formal to long_long
	* s-osinte-android.adb: Likewise.
	* cal.c (__gnat_timeal_to_duration, __gnat_duration_to_timeval): Change
	sec formal from long to long long.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* sem_res.adb (Resolve_Qualified_Expression): Make sure
	Do_Range_Check flag gets set.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* einfo.ads, einfo.adb (Is_Standard_String_Type): New function.
	* exp_ch3.adb (Build_Array_Init_Proc): Use
	Is_Standard_String_Type.
	(Expand_Freeze_Array_Type): ditto.
	(Get_Simple_Init_Val): ditto.
	(Needs_Simple_Initialization): ditto.
	* sem_eval.adb (Eval_String_Literal): Use Is_Standard_String_Type.
	* sem_warn.adb (Is_Suspicious_Type): Use Is_Standard_String_Type.

2014-08-04  Pascal Obry  <obry@adacore.com>

	* adaint.c (__gnat_try_lock): Use _tcscpy and _tcscat instead of
	_stprintf which insert garbage into the wfull_path buffer.

2014-08-04  Arnaud Charlet  <charlet@adacore.com>

	* cal.c: Remove old VMS/nucleus code. Remove obsolete vxworks
	code.
	* fe.h: Minor reformatting.

2014-08-04  Rainer Orth  <ro@CeBiTec.Uni-Bielefeld.DE>

	* cstreams.c: (_LARGEFILE_SOURCE): Guard definition.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* par-ch13.adb (Get_Aspect_Specifications): Improve error
	recovery, fixing a -gnatQ bomb.

2014-08-04  Yannick Moy  <moy@adacore.com>

	* sem_ch3.adb (Analyze_Object_Declaration): In GNATprove mode,
	do not generate two Itypes with the same name for an array
	definition.
	* sinfo.ads: Expand doc on GNATprove mode.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch3.adb (Expand_Freeze_Record_Type): Set the finalization
	master and storage pool attributes on the root type of an
	anonymous access type.
	* exp_ch4.adb (Expand_N_Allocator): Set the finalization master
	and storage pool attributes on the root type of an anonymous
	access type.

2014-08-04  Arnaud Charlet  <charlet@adacore.com>

	* exp_ch3.adb: Minor reformatting.
	* tb-alvms.c, tb-alvxw.c, tb-ivms.c: Removed.
	* tracebak.c: Remove use of above files.
	* gcc-interface/Makefile.in: Update dependencies.

2014-08-04  Pierre-Marie Derodat  <derodat@adacore.com>

	* gcc-interface/utils.c (gnat_set_type_context): Also set the
	context for parallel types' TYPE_STUB_DECL.  Do not change
	anything if the context is already set for them.
	(gnat_pushdecl): Update the comment for calls to
	gnat_set_type_context to mention parallel types.
	(add_parallel_type): When adding a context-less parallel type to
	a type that has a context, propagate the context from the latter
	type to the former.
	(process_deferred_decl_context): Call gnat_set_type_context
	rather than manually setting the type context.
	(build_unc_object_type): Call gnat_set_type_context on the
	template type.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch5.adb (Expand_N_Case_Statement): If a choice is a
	subtype indication and the case statement has only two choices,
	replace subtype indication with its range, because the resulting
	membership test cannot have a subtype indication as an operand.

2014-08-04  Arnaud Charlet  <charlet@adacore.com>

	* exp_ch3.adb: Update comments, minor reformatting.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Analyze_Declarations): Explain why the bodies of
	the default initial condition procedures are build here.
	* sem_util.adb (Build_Default_Init_Cond_Procedure): Wrap the
	analyzed argument of pragma Default_Initial_Condition in some
	dummy code as GNATprove mode disables assertions, but still
	needs to see the argument.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* exp_ch6.adb, sem_util.adb: Minor reformatting.

2014-08-04  Olivier Hainque  <hainque@adacore.com>

	* a-comutr.ads: Set Root_Node_Type'Alignment to
	Standard'Maximum_Alignment, so that it is at least as large as
	the max default for Tree_Node_Type'Alignment.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch3.adb (Freeze_Type): Remove the generation and inheritance
	of the default initial condition procedure [body].
	* sem_ch3.adb (Analyze_Declarations): Create the bodies of
	all default initial condition procedures at the end of private
	declaration analysis.
	* sem_util.adb (Build_Default_Init_Cond_Procedure_Bodies): New
	routine.
	(Build_Default_Init_Cond_Procedure_Body): Merged in the
	processing of routine Build_Default_Init_Cond_Procedure_Bodies.
	* sem_util.ads (Build_Default_Init_Cond_Procedure_Bodies):
	New routine.
	(Build_Default_Init_Cond_Procedure_Body): Removed.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_elab.adb (Check_Elab_Call): Do not check a call to a
	postcondtion.
	* exp_ch6.adb (Expand_Call): Clarify handling of inserted
	postcondition call.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Ensure that an
	internally generated spec for a stand alone body is recognized
	as a proper context for pragma SPARK_Mode.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* erroutc.adb (Delete_Msg): Do not decrement Warnings_Treated_As_Errors.

2014-08-04  Arnaud Charlet  <charlet@adacore.com>

	* adabkend.adb (Scan_Back_End_Switches): Ignore extra -o
	when -gnatO has already been specified, for compatibility
	with gcc driver.
	(Scan_Compiler_Args): Do not call Set_Output_Object_File_Name in
	codepeer mode.
	* g-expect.ads: Fix typo.

2014-08-04  Thomas Quinot  <quinot@adacore.com>

	* exp_ch4.adb (Insert_Dereference_Action): the actual Size
	must account for the bounds template if the designated type is
	an unconstrained array.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* a-cfhama.adb, a-cfhase.adb, a-cforma.adb, a-cforse.adb Add
	SPARK_Mode in the body.
	* sem_ch7.adb (Analyze_Package_Body_Helper): Restore the original
	way to verify the consistency of SPARK_Mode between a spec and
	a body.
	* sem_ch12.adb (Analyze_Package_Instantiation): Remove the call
	to Set_Ignore_Pragma_SPARK_Mode. Set flag Ignore_Pragma_SPARK_Mode
	manually.
	(Analyze_Subprogram_Instantiation): Remove the call to
	Set_Ignore_Pragma_SPARK_Mode. Set flag Ignore_Pragma_SPARK_Mode
	manually.
	* sem_prag.adb (Analyze_Pragma): Remove local variable
	Inst_Id. SPARK_Mode can no longer be applied to a package or
	subprogram instantiation.
	* sem_util.adb, sem_util.ads (Set_Ignore_Pragma_SPARK_Mode):
	Removed.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb, osint.adb, osint.ads: Minor reformatting.

2014-08-04  Yannick Moy  <moy@adacore.com>

	* sem_ch3.adb (Derive_Type_Declaration,
	Process_Discriminants): Remove SPARK-specific legality checks.

2014-08-04  Thomas Quinot  <quinot@adacore.com>

	* g-sechas.ads, g-sechas.adb (HMAC_Initial_Context): New subprogram.
	* gnat_rm.texi (GNAT.MD5/SHA1/SHA224/SHA256/SHA512): Document support
	for HMAC.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch7.adb (Analyze_Package_Body_Helper): When verifying the
	compatibility of SPARK_Mode between a spec and a body, use the
	SPARK_Mode of the public part.
	* sem_ch12.adb (Analyze_Generic_Subprogram_Declaration): Use
	the already available routine to exchange the aspects between
	the template and its copy. Analyze the aspects of copy to
	ensure that the corresponding pragmas perform their semantic
	effects.  The partial analysis of aspects is no longer needed.
	(Analyze_Package_Instantiation): Save and restore the SPARK_Mode
	of the context.
	(Analyze_Subprogram_Instantiation): Save and restore the SPARK_Mode of
	the context.
	* sem_prag.adb (Analyze_Pragma): Do not bypass a subprogram
	instantiation which does not come from source.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* a-cfhama.ads, a-cfhase.ads, a-cforma.ads, a-cforse.ads Add
	SPARK_Mode pragmas to the public and private part of the unit.
	* sem_ch3.adb (Derive_Type_Declaration): Ensure that a derived
	type cannot have discriminants if the parent type already has
	discriminants.
	(Process_Discriminants): Ensure that the type of a discriminant is
	discrete.
	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): The check on
	SPARK_Mode compatibility between a spec and a body can now be
	safely performed while processing a generic.
	* sem_ch7.adb (Analyze_Package_Body_Helper): The check on
	SPARK_Mode compatibility between a spec and a body can now be
	safely performed while processing a generic.
	* sem_prag.adb (Analyze_Pragma): Pragma SPARK_Mode can now be
	safely analyzed when processing a generic.

2014-08-04  Nicolas Roche  <roche@adacore.com>

	* g-dirope.adb: Minor reformating.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* sem_ch6.adb: Minor reformatting.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Analyze_Pragma, case Assert and related pragmas):
	Before normalizing these pragmas into a pragma Check, preanalyze
	the optional Message argument, (which is subsequently copied)
	so that it has the proper semantic information for ASIS use.
	* sem_case.adb: Initialize flag earlier.
	* osint.adb, osint.ads (Find_File): Add parameter Full_Name, used when
	the full source path of a configuration file is requested.
	(Read_Source_File): Use Full_Name parameter..

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* opt.ads Alphabetize various global flags. New flag
	Ignore_Pragma_SPARK_Mode along with a comment on usage.
	* sem_ch6.adb (Analyze_Generic_Subprogram_Body):
	Pragma SPARK_Mode is now allowed in generic units.
	(Analyze_Subprogram_Body_Helper): Do not verify the compatibility
	between the SPARK_Mode of a spec and that of a body when inside
	a generic.
	* sem_ch7.adb (Analyze_Package_Body_Helper): Do not verify the
	compatibility between the SPARK_Mode of a spec and that of a
	body when inside a generic.
	* sem_ch12.adb (Analyze_Generic_Subprogram_Declaration):
	Pragma SPARK_Mode is now allowed in generic units.
	(Analyze_Package_Instantiation): Save and restore the value of
	flag Ignore_ Pragma_SPARK_Mode in a stack-like fasion. Set
	the governing SPARK_Mode before analyzing the instance.
	(Analyze_Subprogram_Instantiation): Save and restore the value
	of flag Ignore_ Pragma_SPARK_Mode in a stack-like fasion. Set
	the governing SPARK_Mode before analyzing the instance.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Emulate the
	placement of a source pragma when inserting the generated pragma
	for aspect SPARK_Mode.
	* sem_prag.adb (Analyze_Pragma): Reimplement the handling of
	pragma SPARK_Mode to allow for generics and their respective
	instantiations.
	* sem_util.ads, sem_util.adb (Check_SPARK_Mode_In_Generic): Removed.
	(Set_Ignore_Pragma_SPARK_Mode): New routine.

2014-08-04  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <E_Component>: Deal with
	renaming discriminants in tagged types first.
	* gcc-interface/trans.c (gnat_to_gnu) <N_Selected_Component>: Test
	the underlying type of the prefix.
	(Pragma_to_gnu, case Pragma_Warning): Ignore Reason => "..."
	(process_freeze_entity): Reset the nodes of all the view of a type,
	if any.

2014-08-04  Doug Rupp  <rupp@adacore.com>
	    Olivier Hainque  <hainque@adacore.com>

	* gcc-interface/Makefile.in (x86 VxWorks): Add filter-out for vxworks7
	and remove incorrect EH_MECHANISM macros.
	Add sigtramp.h to EXTRA_LIBGNAT_SRCS when we add sigtramp-vxworks.o to
	EXTRA_LIBGNAT_OBJS.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb (Expand_N_Attribute_Reference): Make sure prefix
	of constructed 'Valid attribute in -gnatVa mode does not appear
	to come from source.
	* sem_attr.adb (Analyze_Access_Attribute): Don't set
	Never_Set_In_Source for non-source reference.
	* sem_util.adb: Minor reformatting.
	* sem_warn.adb (Check_References): Don't check Address_Taken,
	not necessary, see comment.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb, sem_case.adb: Minor reformatting.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch9.adb (Extract_Entry): If the synchronized object is a
	limited view, replace with non-limited view, which is available
	at the point of an entry call.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch6.adb (Expand_Call): If the call is to a function in
	a run-time unit that is marked Inline_Always, we must suppress
	debugging information on it, so that the code that is eventually
	inlined will not affect debugging of the user program.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* inline.adb, einfo.ads, s-tassta.adb, s-tarest.adb: Minor comment
	fixes.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Process_Import_Or_Interface): Handle properly
	an aspect Import that specifies a False value.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Add section on aspect Invariant'Class.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_case.adb (Check_Choice_Set): New flag Predicate_Error,
	for better control of cascaded error messages when some choice
	in a case statement over a predicated type violates the given
	static predicate.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Build_Derived_Type): Modify the
	inheritance of the rep chain to ensure that a non-tagged type's
	items are not clobbered during the inheritance.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, einfo.ads: Minor reformatting.

2014-08-04  Yannick Moy  <moy@adacore.com>

	* inline.adb (Can_Be_Inlined_In_GNATprove_Mode): Fix
	detection of subprograms that cannot be inlined in GNATprove mode.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* einfo.adb: Add guard to Returns_Limited_View.

2014-08-04  Jose Ruiz  <ruiz@adacore.com>

	* s-tassta.adb, s-tarest.adb (Task_Wrapper): Force maximum alignment of
	the secondary stack to respect the alignments of the returned objects.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* einfo.ads, einfo.adb (Returns_Limited_View): New flag defined
	on function entities whose return type is a limited view.
	* freeze.adb (Freeze_Entity): Use Returns_Limited_View to determine
	where to place the freeze node for a function that returns the
	limited view of a type, when the function is called and frozen
	in a different unit.

2014-08-04  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_ch3.adb (Build_Derived_Private_Type): Minor code
	refactoring.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Clarify documentation on assertions.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_aggr.adb (Resolve_Record_Aggregate, Get_Value): Warn
	if a component association has a box initialization when the
	component type has no default initialization, either through an
	initial value, an aspect, or an implicit initialization procedure.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* freeze.adb: Code clean up.

2014-08-04  Thomas Quinot  <quinot@adacore.com>

	* sem_ch5.adb: Minor reformatting.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* freeze.adb (Late_Freeze_Subprogram): Following AI05-151,
	a function can return a limited view of a type declared
	elsewhere. In that case the function cannot be frozen at the end
	of its enclosing package. If its first use is in a different unit,
	it cannot be frozen there, but if the call is legal the full view
	of the return type is available and the subprogram can now be
	frozen. However the freeze node cannot be inserted at the point
	of call, but rather must go in the package holding the function,
	so that the backend can process it in the proper context.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* exp_ch5.adb, sem_ch5.adb, einfo.ads: Minor reformatting.

2014-08-04  Arnaud Charlet  <charlet@adacore.com>

	* sem_ch4.adb (Operator_Check): Refine previous change.

2014-08-04  Arnaud Charlet  <charlet@adacore.com>

	* sem_scil.ads: Improve comments.
	* sem_ch4.adb (Analyze_Equality_Op): Add support for
	Allow_Integer_Address (equality between Address and Integer).

2014-08-04  Yannick Moy  <moy@adacore.com>

	* a-cfhama.adb, a-cforse.adb: Minor fixes to avoid using prefix
	notation on untagged objects.
	* sem.ads: Update comment.
	* inline.adb (Can_Be_Inlined_In_GNATprove_Mode): Do
	not inline subprograms declared in the visible part of a package.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch5.adb: minor reformatting.
	* einfo.ads, einfo.adb (Is_Processed_Transient): Applies to loop
	parameters.

2014-08-04  Thomas Quinot  <quinot@adacore.com>

	* s-fatgen.adb: Minor reformatting.

2014-08-04  Arnaud Charlet  <charlet@adacore.com>

	* exp_util.adb (Is_Possibly_Unaligned_Object): Always return
	False on .NET.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Loop_Statement): Set properly the kind of
	the loop parameter for element iterators over containers and
	arrays, so that improper uses of it are detected in the loop
	body when expansion is disabled.
	* exp_ch5.adb (Expand_Iterator_Loop): The entity kind of the
	generated cursor is that of the analyzed loop parameter.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch3.adb (Build_CPP_Init_Procedure): Remove
	Flag_Decl. Do not analyze the declaration of the flag as it is
	not part of the tree yet, instead add it to the freeze actions
	of the C++ type.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* checks.adb (Apply_Scalar_Range_Check): Make sure we handle
	case of OUT and IN OUT parameter correctly (where Source_Typ is
	set), we were missing one case where a check must be applied.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch8.adb (Build_Class_Wide_Wrapper): Update the comment on
	the generated code. Instead of hiding the renaming and using the
	wrapper as the proper association, have the subprogram renaming
	alias the wrapper.
	(Build_Spec): The entity of the wrapper is
	now derived from the entity of the related primitive.

2014-08-04  Emmanuel Briot  <briot@adacore.com>

	* s-regpat.adb: s-regpat.adb (Parse): fix incorrect link when
	using non-capturing groups.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* inline.adb (Build_Body_To_Inline): Remove Unmodified and
	related pragmas before copying the original body, to prevent
	spurious errors when the pragmas apply to formals that will not
	appear in the inlined body.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* exp_prag.adb, sem_ch7.adb, einfo.adb, sem_prag.adb, sem_util.adb,
	exp_ch3.adb: Minor reformatting.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* prj-strt.adb, prj-strt.ads, sem_attr.adb: Minor reformatting.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.adb Add an entry in table Canonical_Aspect for
	Default_Initial_Condition.
	* aspects.ads Add an entry in tables Aspect_Id, Aspect_Argument,
	Aspect_Names and Aspect_Delay for Default_Initial_Condition.
	* einfo.adb Flag3 is now Has_Default_Init_Cond. Flag132
	is now Is_Default_Init_Cond_ Procedure. Flag133 is now
	Has_Inherited_Default_Init_Cond.
	(Default_Init_Cond_Procedure): New routine.
	(Has_Default_Init_Cond): New routine.
	(Has_Inherited_Default_Init_Cond): New routine.
	(Is_Default_Init_Cond_Procedure): New routine.
	(Set_Default_Init_Cond_Procedure): New routine.
	(Set_Has_Default_Init_Cond): New routine.
	(Set_Has_Inherited_Default_Init_Cond): New routine.
	(Set_Is_Default_Init_Cond_Procedure): New routine.
	(Write_Entity_Flags): Output all the new flags.
	* einfo.ads New attributes Default_Init_Cond_Procedure,
	Has_Inherited_Default_Init_Cond and Is_Default_Init_Cond_Procedure
	along with usage in nodes.
	(Default_Init_Cond_Procedure): New routine.
	(Has_Default_Init_Cond): New routine and pragma Inline.
	(Has_Inherited_Default_Init_Cond): New routine and
	pragma Inline.
	(Is_Default_Init_Cond_Procedure): New routine and
	pragma Inline.
	(Set_Default_Init_Cond_Procedure): New routine.
	(Set_Has_Default_Init_Cond): New routine and pragma Inline.
	(Set_Has_Inherited_Default_Init_Cond): New routine and pragma Inline.
	(Set_Is_Default_Init_Cond_Procedure): New routine and pragma Inline.
	* exp_ch3.adb (Expand_N_Object_Declaration): New constant
	Next_N. Generate a call to the default initial condition procedure
	if the object's type is subject to the pragma.	(Freeze_Type):
	Generate the body of the default initial condition procedure or
	inherit the spec from a parent type.
	* exp_ch7.adb Add with and use clause for Exp_Prag.
	(Expand_Pragma_Initial_Condition): Removed.
	* exp_prag.ads, exp_prag.adb (Expand_Pragma_Initial_Condition): New
	routine.
	* par-prag.adb (Prag): Pragma Default_Initial_Condition does
	not need special treatment by the parser.
	* sem_ch3.adb (Build_Derived_Record_Type): Propagate the
	attributes related to pragma Default_Initial_Condition to the
	derived type.
	(Process_Full_View): Propagate the attributes
	related to pragma Default_Initial_Condition to the full view.
	* sem_ch7.adb (Analyze_Package_Specification): Build the
	declaration of the default initial condition procedure for all
	types that qualify or inherit the one from the parent type.
	* sem_ch13.adb (Analyze_Aspect_Specifications):
	Add processing for aspect Default_Initial_Condition.
	(Check_Aspect_At_Freeze_Point): Aspect
	Default_Initial_Condition does not require delayed analysis.
	(Replace_Type_References_Generic): Moved to spec.
	* sem_ch13.ads (Replace_Type_References_Generic): Moved from body.
	* sem_prag.adb Add an entry in table Sif_Glags for
	Default_Initial_Condition.
	(Analyze_Pragma): Pragma
	Default_Initial_Condition is now part of assertion
	policy. Add processing for pragma Default_Initial_Condition.
	(Is_Valid_Assertion_Kind): Pragma Default_Initial_Condition is
	now recognized as a proper assertion policy.
	* sem_util.ads, sem_util.adb (Build_Default_Init_Cond_Call): New
	routine.
	(Build_Default_Init_Cond_Procedure_Body): New routine.
	(Build_Default_Init_Cond_Procedure_Declaration): New routine.
	(Inherit_Default_Init_Cond_Procedure): New routine.
	* snames.ads-tmpl Add new predefined name and pragma id for
	Default_Initial_Condition.

2014-08-04  Vincent Celier  <celier@adacore.com>

	* prj-dect.adb (Parse_Case_Construction): It is no longer
	an error if the variable for a case construction is not
	typed, only if the variable value is not a single string. Call
	Parse_Choice_List and End_Case_Construction with the new parameter
	to indicate that the variable is typed.
	* prj-strt.adb (End_Case_Construction): Only check the labels
	if the variable is typed.  If the variable is not typed,
	issue a warning when there is no "when others" allternative.
	(Parse_Choice_List): Manage the labels only if the variable
	is typed.
	* prj-strt.ads (End_Case_Construction): New Boolean parameter
	String_Type.
	(Parse_Choice_List): Ditto.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb: Additional fix to Check_Predicate_Use.

2014-08-04  Vincent Celier  <celier@adacore.com>

	* projects.texi: Update documentation of case constructions with
	variables that are not typed.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch8.adb (Build_Class_Wide_Wrapper): If the operator carries
	an Eliminated pragma, indicate that the wrapper is also to be
	eliminated, to prevent spurious errors when using gnatelim on
	programs that include box-initialization of equality operators
	(consequence of AI05-071)..

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* checks.adb (Activate_Overflow_Check): Handle floating-point
	case correctly.
	* checks.ads (Activate_Overflow_Check): Clarify handling of
	floating-point cases.
	* exp_util.adb (Check_Float_Op_Overflow): Reset Do_Overflow_Check
	flag if we generate an explicit overflow check (for
	Check_Float_Overflow mode).

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* prj-proc.adb, prj-part.adb, prj-strt.adb, prj.adb, prj.ads,
	prj-attr.adb, prj-attr.ads: Minor reformatting.

2014-08-04  Yannick Moy  <moy@adacore.com>

	* expander.adb (Expand): Always perform special
	expansion in GNATprove mode, even when doing pre-analysis.

2014-08-04  Thomas Quinot  <quinot@adacore.com>

	* repinfo.adb (List_Scalar_Storage_Order): List bit order if
	not default. Also list bit order if SSO is specified. Do not
	assume that bit order is always equal to scalar storage order.

2014-08-04  Thomas Quinot  <quinot@adacore.com>

	* freeze.adb (Set_SSO_From_Default): Do not set scalar storage
	order to reverse SSO for a type that has an explicit native
	Bit_Order.

2014-08-04  Doug Rupp  <rupp@adacore.com>

	* cal.c: Macro check for VxWorks7.
	* init.c (getpid): Likewise.
	* mkdir.c (__gnat_mkdir): Likewise.
	* sysdep.c (__gnat_is_file_not_found_error): Likewise.

2014-08-04  Gary Dismukes  <dismukes@adacore.com>

	* exp_ch3.adb (Expand_N_Object_Declaration): Inhibit generation
	of an invariant check in the case where No_Initialization is set,
	since the object is uninitialized.

2014-08-04  Thomas Quinot  <quinot@adacore.com>

	* snames.ads-tmpl (Default_Scalar_Storage_Order): Now an attribute
	name, in addition to a pragma name.
	* snames.adb-tmpl (Get_Pragma_Id, Is_Configuration_Pragma_Name,
	Is_Pragma_Name): Adjust accordingly.
	* sem_attr.ads, sem_attr.adb, exp_attr.adb
	(Attribute_Default_Scalar_Storage_Order): Add handling of new
	attribute.
	* gnat_rm.texi: Document the above.

2014-08-04  Arnaud Charlet  <charlet@adacore.com>

	* exp_util.adb (Check_Float_Op_Overflow): No-op in codepeer
	mode for now, to revert to previous behavior.
	* checks.adb: Revert previous change, no longer needed.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* gnat1drv.adb (Adjust_Global_Switches): Don't set
	Check_Float_Overflow if Machine_Oveflows_On_Target is True.
	* sem_prag.adb (Analyze_Pragma, case Check_Float_Overflow): Don't
	set Check_Float_Overflow if Machine_Oveflows_On_Target is True.
	* switch-c.adb (Scan_Front_End_Switches): Don't set
	Check_Float_Overflow if Machine_Oveflows_On_Target is True.

2014-08-04  Vincent Celier  <celier@adacore.com>

	* prj-attr.adb: Add new default indications for
	attributes Object_Dir, Exec_Dir, Source_Dirs and Target.
	(Attribute_Default_Of): New function (Initialize): Set the
	default for those attributes that have one specified.
	* prj-attr.ads (Attribute_Data): New component Default.
	* prj-proc.adb (Expression): Take into account the new defaults
	for attributes Object_Dir, Exec_Dir and Source_Dirs.
	* prj-strt.adb (Attribute_Reference): Set the default for
	the attribute.
	* prj-tree.ads, prj-tree.adb (Default_Of): New function.
	(Set_Default_Of): New procedure.
	* prj.adb (The_Dot_String): New global Name_Id variable,
	initialized in procedure Initialize.
	(Dot_String): New function
	(Initialize): Initialize The_Dot_String.
	(Reset): Create the string list Shared.Dot_String_List.
	* prj.ads (Attribute_Default_Value): New enumeration type.
	(Project_Qualifier): Change enumeration value Dry to Abstract_Project.
	(Dot_String): New function.
	(Shared_Project_Tree_Data): New string list component Dot_String_List.
	* projects.texi: Document new defaults for attribute Object_Dir,
	Exec_Dir and Source_Dirs.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* sem_ch12.adb: Minor reformatting.

2014-08-04  Arnaud Charlet  <charlet@adacore.com>

	* exp_util.adb, checks.adb (Check_Float_Op_Overflow): Add special
	expansion in CodePeer_Mode.
	(Selected_Range_Checks): Add handling of overflow checks in
	CodePeer_Mode.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb (Expand_N_Attribute_Reference, case Pred):
	Remove special test for Float'First, no longer required.
	(Expand_N_Attribute_Reference, case Succ): Remove special test
	for Float'First, no longer required.
	* s-fatgen.adb (Pred): return infinity unchanged.
	(Succ): ditto.

2014-08-04  Claire Dross  <dross@adacore.com>

	* sem_ch12.adb (Analyze_Associations): Defaults should only be
	used if there is no explicit match.
	* exp_util.adb (Get_First_Parent_With_Ext_Axioms_For_Entity):
	Also check for pragma external_axiomatization on generic units.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* checks.adb (Activate_Overflow_Check): Remove
	Check_Float_Overflow processing.
	(Apply_Scalar_Range_Check): Ditto.
	(Generate_Range_Check): Ditto.
	* exp_ch4.adb (Expand_N_Op_Add): Add call to
	Check_Float_Op_Overflow.
	(Expand_N_Op_Divide): ditto.
	(Expand_N_Op_Multiply): ditto.
	(Expand_N_Op_Subtract): ditto.
	* exp_util.ads, exp_util.adb (Check_Float_Op_Overflow): New procedure.
	* sem_attr.adb (Analyze_Attribute, case Pred): Make sure
	Do_Range_Check is set for floating-point case in -gnatc or
	GNATprove mode.
	(Analyze_Attribute, case Succ): Make sure
	Do_Range_Check is set for floating-point case in -gnatc or
	GNATprove mode.
	* sem_res.adb (Resolve_Type_Conversion): Make sure Do_Range_Check
	flag is set for real to integer conversion in GNATprove or
	-gnatc mode.

2014-08-04  Gary Dismukes  <dismukes@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): Resolve
	the expression of an Import or Export aspect as type Boolean
	and require it to be static. Add ??? comment. Also, set the
	Is_Exported flag when appropriate.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb: Minor reformatting.
	* exp_attr.adb: Minor reformatting.

2014-08-04  Thomas Quinot  <quinot@adacore.com>

	* s-fatgen.ads, s-fatgen.adb (S, P): New visible type declarations
	(Unaligned_Valid): Remove now unused subprogram.
	* exp_attr.adb (Expand_N_Attribute_Reference, case
	Attribute_Valid): If the prefix is in reverse SSO or potentially
	unaligned, copy it using a byte copy operation to a temporary
	variable.
	* einfo.adb: Minor comment fix.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* freeze.adb (Freeze_Entity): Do not freeze formal subprograms.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* s-imgrea.adb (Image_Floating_Point): Don't add space before +Inf.
	* s-fatgen.adb (Pred): Handle Float'First.
	(Succ): Handle Float'Last.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb (Is_Potentially_Unevaluated): If the original
	node of a parent node in the tree is a short-circuit operation,
	the node is potentially unevaluated.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* sem_res.adb (Resolve_Type_Conversion): Set Do_Range_Check on
	conversion from a real type to an integer type.

2014-08-04  Yannick Moy  <moy@adacore.com>

	* sem_aggr.adb, sem_ch3.adb, sem_ch5.adb, sem_ch7.adb, sem_ch9.adb,
	sem_ch12.adb, sem_util.adb, sem_util.ads, sem_res.adb, sem_attr.adb,
	exp_ch6.adb, sem_ch4.adb, restrict.adb, restrict.ads, sem_ch6.adb,
	sem_ch8.adb, sem_ch11.adb: Update some subprogram names to refer to
	SPARK_05 instead of SPARK.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* sem.ads: Minor reformatting.
	* sem_ch13.adb (Analyze_Aspect_External_Or_Link_Name): Minor
	reformatting.
	(Analyze_Aspect_Specifications, case Convention): Put External_Name
	before Link_Name when constructing pragma.

2014-08-04  Yannick Moy  <moy@adacore.com>

	* sem.adb, sem.ads (In_Default_Expr): Global flag that is set
	to True during analysis of a default component expression.
	(Semantics): Save and restore In_Default_Expr around analysis.
	* sem_ch3.adb, sem_ch3.ads (Analyze_Component_Declaration):
	Call new wrapper Preanalyze_Default_Expression.
	(Preanalyze_Default_Expression): New wrapper on
	Preanalyze_Spec_Expression which sets and restores In_Default_Expr.
	* sem_res.adb (Resolve_Call): Mark calls inside default
	expressions as not inlined in GNATprove mode.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb: Minor reformatting.

2014-08-04  Olivier Hainque  <hainque@adacore.com>

	* link.c: remove const on __gnat_objlist_file_supported for AIX

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* sem_util.ads: Minor addition of comment.

2014-08-04  Vincent Celier  <celier@adacore.com>

	* prj-dect.adb (Check_Package_Allowed): Allow package IDE in
	all projects, including aggregate and aggregate library projects.

2014-08-04  Yannick Moy  <moy@adacore.com>

	* back_end.adb (Call_Back_End): Do not call gigi in GNATprove mode.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* sem_eval.adb (Test_In_Range): Always in range for
	Is_Known_Valid target type, where input type has smaller or
	equal size and does not have biased rep.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Eval_Attribute): Constrained is not treated as
	a static attribute, and the Static flag must not be set on it
	during resolution. It may be constant-folded during expansion,
	but if expansion is disabled it is not a static expression.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch8.adb (Build_Class_Wide_Wrapper): Mark the primitive as
	referenced once resolution has taken place.

2014-08-04  Gary Dismukes  <dismukes@adacore.com>

	* exp_ch4.adb (Expand_N_Type_Conversion): Don't
	compare access levels in the case where the target type is the
	anonymous type of an access discriminant, since the level of
	such types is defined based on context. Add comment.

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch8.adb (Build_Class_Wide_Wrapper): Handle various special
	cases related to equality.  Remove the special processing
	for dispatching abstract subprograms as it is not needed.
	(Interpretation_Error): Add a specialized error message for
	predefined operators.
	(Is_Intrinsic_Equality): New routine.
	(Is_Suitable_Candidate): New routine.

2014-08-04  Gary Dismukes  <dismukes@adacore.com>

	* checks.adb: Minor comment reformatting.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* restrict.adb (Check_Restriction): For checked max_parameter
	restrictions reset Violated flag, so that subsequent violations
	are properly detected.

2014-08-04  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb (Check_Initialization): Fix bad test of GNATprove
	mode.
	(Process_Discriminants): Fix bad test of GNATprove mode

2014-08-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch12.adb (Instantiate_Formal_Subprogram):
	Move variable to their own section. Propagate the source
	location of a formal parameter to the corresponding formal of
	the subprogram renaming declaration. Code reformatting.

2014-08-04  Arnaud Charlet  <charlet@adacore.com>

	* g-trasym-vms-ia64.adb, g-trasym-vms-alpha.adb: Removed.

2014-08-04  Ed Schonberg  <schonberg@adacore.com>

	* exp_aggr.adb (Expand_Array_Aggregate): Do not attempt expansion
	if error already detected.  We may reach this point in spite of
	previous errors when compiling with -gnatq, to force all possible
	errors (this is the usual ACATS mode).

2014-08-04  Gary Dismukes  <dismukes@adacore.com>

	* checks.adb (Generate_Range_Check): For the case of converting
	a base type with a larger range to a smaller target subtype, only
	use unchecked conversions of bounds in the range check followed
	by conversion in the case where both types are discrete. In other
	cases, convert to the target base type and save in a temporary
	followed by the range check.
	(Convert_And_Check_Range): New procedure factoring code to save
	conversion to a temporary followed by a range check (called two
	places in Generate_Range_Check).
	* exp_ch4.adb (Expand_N_Type_Conversion): Relax previous
	check-in, to generate range checks for conversions between
	any floating-point types rather than limiting it to matching
	base types.

2014-08-02  Trevor Saunders  <tsaunders@mozilla.com>

	* gcc-interface/trans.c: Use hash_set instead of pointer_set.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* restrict.adb (Update_Restrictions): For restrictions with a
	maximum parameter (e.g. number of protected entries in Ravenscar)
	do not compute the maximum of the violation over several objects,
	because the restriction is per-object.
	(Check_Restriction): After possible message, reset the value
	of of a checked max_parameter restriction to zero, to prevent
	cascaded errors.
	* sem_ch3.adb (Build_Derived_Private_Type): Use base of parent
	(sub)type to determine whether derived type should be on the
	list of private dependents of a type whose full view may become
	visible subsequently.

2014-08-01  Olivier Hainque  <hainque@adacore.com>

	* gcc-interface/Make-lang.in (ADA_TOOLS_FLAGS_TO_PASS, native): use
	$(CXX) instead of ../../xg++ to feed CXX.
	(CXX_LFLAGS): Remove. Now unused as the proper flags
	are expected to be included in the CXX variable.

2014-08-01  Pierre-Marie Derodat  <derodat@adacore.com>

	* gcc-interface/decl.c (elaborate_expression_1): Return the new
	variable when debug info is needed and the expression is not
	constant.  Tag as external only new variables that are global.
	(gnat_to_gnu_entity): Call it after the GNU declaration is saved.
	* gcc-interface/trans.c (Attribute_to_gnu): Do not cache
	attributes for IN array parameters when their actual subtype
	needs debug info.
	(Compilation_Unit_to_gnu): Call it to process all remaining nodes.
	* gcc-interface/gigi.h (process_deferred_decl_context): New.
	* gcc-interface/utils.c (gnat_write_global_declarations): Do not
	emit debug info for ignored global declarations.
	(struct deferred_decl_context_node,
	add_deferred_decl_context, add_deferred_type_context,
	compute_deferred_decl_context, defer_or_set_type_context,
	deferred_decl_context_queue, get_debug_scope,
	get_global_context, process_deferred_decl_context): New.
	(gnat_pushdecl): Re-implement the DECL_CONTEXT and TYPE_CONTEXT
	computation machinery to rely on the GNAT Scope attribute.

2014-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/utils2.c (build_simple_component_ref): Add guard.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_ch8.adb, opt.ads Minor comment updates.

2014-08-01  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_intr.adb (Expand_Unc_Deallocation): Request a renaming
	from the side effects removal machinery.
	* exp_util.adb (Duplicate_Subexpr): Add formal parameter
	Renaming_Req. Update the nested call to Remove_Side_Effects.
	(Duplicate_Subexpr_No_Checks): Add formal parameter
	Renaming_Req. Update the nested call to Remove_Side_Effects.
	(Duplicate_Subexpr_Move_Checks): Add formal parameter
	Renaming_Req. Update the nested call to Remove_Side_Effects.
	(Remove_Side_Effects): Add formal parameter Renaming_Req. Generate
	an object renaming declaration when the caller requests it.
	* exp_util.ads (Duplicate_Subexpr): Add formal
	parameter Renaming_Req. Update comment on usage.
	(Duplicate_Subexpr_No_Checks): Add formal parameter Renaming_Req.
	(Duplicate_Subexpr_Move_Checks): Add formal parameter
	Renaming_Req.

2014-08-01  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Minor updates.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* atree.adb: Minor reformatting.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* exp_aggr.adb (Init_Hidden_Discriminants): If some ancestor is a
	private extension, get stored constraint, if any, from full view.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* opt.ads (No_Elab_Code_All_Pragma): New global variable.
	* sem_ch10.adb (Check_No_Elab_Code_All): New procedure
	(Analyze_Compilation_Unit): Call Check_No_Elab_Code_All
	(Analyze_Subunit_Context): Call Check_No_Elab_Code_All.
	* sem_prag.adb (Analyze_Pragma, case No_Elaboration_Code_All):
	Remove code for checking with's, now in sem_ch10.adb, set
	Opt.No_Elab_Code_All_Pragma.

2014-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_ch3.adb (Copy_And_Build): Copy the declaration for
	access types as well and adjust the subtype mark if there are
	no constraints.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_eval.adb (Test_In_Range): Return Unknown if error posted.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, einfo.ads, exp_ch4.adb: Code clean ups.

2014-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* einfo.ads (Has_Private_Ancestor): Remove obsolete usage.
	* exp_ch4.adb (Expand_Composite_Equality): Add conversion
	of the actuals in the case of untagged record types too.
	* sem_ch3.adb (Build_Full_Derivation): New procedure to create the
	full derivation of a derived private type, extracted from...
	(Copy_And_Build): In the case of record types and most
	enumeration types, copy the original declaration.  Build the
	full derivation according to the approach extracted from...
	(Build_Derived_Private_Type): ...here.	Call Build_Full_Derivation
	to create the full derivation in all existing cases and also
	create it in the no-discriminants/discriminants case instead of
	deriving directly from the full view.
	(Is_Visible_Component): Remove obsolete code.
	* sem_aggr.adb (Resolve_Record_Aggregate): Likewise.

2014-08-01  Arnaud Charlet  <charlet@adacore.com>

	* fe.h (GNAT_Mode): New.
	* gcc-interface/decl.c (gnat_to_gnu_entity): Do not error out on
	reverse SSO in GNAT mode.

2014-08-01  Thomas Quinot  <quinot@adacore.com>

	* freeze.adb: Minor reformatting.

2014-08-01  Thomas Quinot  <quinot@adacore.com>

	* exp_ch3.adb (Default_Initialize_Object): Do not generate
	default initialization for an imported object.

2014-08-01  Olivier Hainque  <hainque@adacore.com>

	* seh_init.c (__gnat_map_SEH): Cast argument of IsBadCodePtr
	to the expected FARPROC type instead of void *.
	* adaint.c (f2t): Expect __time64_t * as second argument, in line with
	other datastructures.
	(__gnat_file_time_name_attr): Adjust accordingly.
	(__gnat_check_OWNER_ACL): Declare pSD as PSECURITY_DESCRIPTOR,
	in line with uses.
	(__gnat_check_OWNER_ACL): Declare AccessMode
	parameter as ACCESS_MODE instead of DWORD, in line with callers
	and uses.
	(__gnat_set_executable): Add ATTRIBUTE_UNUSED on mode,
	unused on win32.  Correct cast of "args" on call to spawnvp.
	(add_handle): Cast realloc calls into their destination types.
	(win32_wait): Remove declaration and initialization of unused variable.
	(__gnat_locate_exec_on_path): Cast alloca calls
	into their destination types.
	* initialize.c (append_arg, __gnat_initialize): Cast xmalloc calls into
	their destination types.

2014-08-01  Gary Dismukes  <dismukes@adacore.com>

	* exp_ch4.adb (Expand_N_Type_Conversion): Expand
	range checks for conversions between floating-point subtypes
	when the target and source types are the same.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* exp_aggr.adb: Minor reformatting.

2014-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_ch13.adb (Check_Indexing_Functions): Initialize
	Indexing_Found.

2014-08-01  Arnaud Charlet  <charlet@adacore.com>

	* gnat1drv.adb (Gnat1drv): In gnatprove mode, we now write the
	ALI file before we call the backend (so that gnat2why can append
	to it).

2014-08-01  Thomas Quinot  <quinot@adacore.com>

	* exp_pakd.adb (Expand_Bit_Packed_Element_Set,
	Expand_Packed_Element_Reference): Pass additional Rev_SSO
	parameter indicating whether the packed array type has reverse
	scalar storage order to the s-pack* Set/Get routines.
	* s-pack*.ad* (Get, Set, GetU, SetU): New formal Rev_SSO
	indicating reverse scalar storage order.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb (Check_Initialization): Set Do_Range_Check
	for initial component value in -gnatc or GNATprove mode.
	(Process_Discriminants): Same fix for default discriminant values.
	* sem_eval.adb (Test_In_Range): Improve accuracy of results by
	checking subtypes.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sinfo.ads: Minor comment clarification.

2014-08-01  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): Code
	reformatting. Store the generated pragma Import in the related
	subprogram as routine Wrap_Imported_Subprogram will need it later.
	* sem_prag.adb (Is_Unconstrained_Or_Tagged_Item): An item of
	a private type with discriminants is considered to fall in the
	category of unconstrained or tagged items.

2014-08-01  Arnaud charlet  <charlet@adacore.com>

	* s-os_lib.adb (Open_Append): New functions to open a file for
	appending. This binds to the already existing (but not used)
	__gnat_open_append.
	* osint.ads, osint.adb (Open_File_To_Append_And_Check): New procedure
	to open a file for appending.
	* osint-c.ads, osint-c.adb (Open_Output_Library_Info): New procedure
	to open the ALI file for appending.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_ch8.adb: Minor reformatting.

2014-08-01  Yannick Moy  <moy@adacore.com>

	* sem_ch13.adb (Insert_Pragma): Add special case for precondition
	pragmas from aspects, which need to be inserted in proper order.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* exp_aggr.adb (Expand_Record_Aggregate, Init_Hidden_Discriminants):
	Handle properly a type extension that constrains a discriminated
	derived type that renames other discriminants of an ancestor.

2014-08-01  Thomas Quinot  <quinot@adacore.com>

	* s-pack06.adb, s-pack10.adb, s-pack03.ads, s-pack12.adb, s-pack14.ads,
	s-pack25.adb: Fix minor inconsistencies and typos.

2014-08-01  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch8.adb (Analyze_Subprogram_Renaming): Alphabetize
	globals and move certain variables to the "local
	variable" section. Call Build_Class_Wide_Wrapper when
	renaming a default actual subprogram with a class-wide actual.
	(Build_Class_Wide_Wrapper): New routine.
	(Check_Class_Wide_Actual): Removed.
	(Find_Renamed_Entity): Code reformatting.
	(Has_Class_Wide_Actual): Alphabetize. Change the
	logic of the predicate as the renamed name may not necessarely
	denote the correct subprogram.

2014-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_ch7.adb: Fix minor oversight in condition.

2014-08-01  Bob Duff  <duff@adacore.com>

	* projects.texi: Minor documentation improvements.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* aspects.ads, aspects.adb: Add aspect No_Elaboration_Code_All.
	* gnat_rm.texi: Document No_Elaboration_Code_All pragma and aspect.
	* lib-load.adb: Initialize No_Elab_Code_All field.
	* lib-writ.adb: Initialize No_Elab_Code_All.
	* lib.ads, lib.adb: New field No_Elab_Code_All.
	* par-prag.adb: Add dummy entry for pragma No_Elaboration_Code_All.
	* restrict.ads, restrict.adb: Restriction No_Elaboration_Code_All no
	longer exists.
	* sem_ch10.adb (Analyze_Context): Processing for
	No_Elaboration_Code_All removed.
	(Generate_Parent_References): Moved to Sem_Util.
	* sem_prag.adb: Add processing for pragma No_Elaboration_Code_All.
	* sem_util.ads, sem_util.adb (Get_Parent_Entity): Moved here from
	Sem_Ch10.
	* snames.ads-tmpl: Add entry for pragma No_Elaboration_Code_All.
	* targparm.adb: Minor comment updates Add comments on ignoring
	pragma No_Elaboration_Code_All.

2014-08-01  Nicolas Roche  <roche@adacore.com>

	* adaint.c (__gnat_set_close_on_exec): Ensure that
	we can unset "close_on_exec" flag.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch9.adb (Build_Wrapper_Spec, Replicate_Formals): When building
	the parameter specs of the wrapper program for a primitive operation
	of a synchronized type that implements an interface, copy the
	null_exclusion indicator as well.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_eval.ads: Minor reformatting.

2014-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* exp_ch3.adb (Build_Initialization_Call): Call Underlying_Type
	to go down the chain of private derivations.
	* freeze.adb (Freeze_Entity): Fix typo in comment.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Access_Type_Declaration): If designated type is
	a limited view, create a master entity (as is already done for
	class-wide types) in case the full view designates a type that
	contains tasks.
	* sem_ch8.adb (Find_Selected_Component): If prefix is a dereference
	and the designated type is a limited view, use the non-limited
	view if available.

2014-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/ada-tree.h (DECL_BY_DESCRIPTOR_P): Delete.
	(DECL_FUNCTION_STUB): Likewise.
	(SET_DECL_FUNCTION_STUB): Likewise.
	(DECL_PARM_ALT_TYPE): Likewise.
	(SET_DECL_PARM_ALT_TYPE): Likewise.
	(TYPE_VAX_FLOATING_POINT_P): Delete.
	(TYPE_DIGITS_VALUE): Likewise.
	(SET_TYPE_DIGITS_VALUE): Likewise.
	* gcc-interface/gigi.h (standard_datatypes): Remove ADT_malloc32_decl.
	(malloc32_decl): Delete.
	(build_vms_descriptor): Likewise.
	(build_vms_descriptor32): Likewise.
	(fill_vms_descriptor): Likewise.
	(convert_vms_descriptor): Likewise.
	(TARGET_ABI_OPEN_VMS): Likewise.
	(TARGET_MALLOC64): Likewise.
	* gcc-interface/decl.c (add_parallel_type_for_packed_array): New.
	(gnat_to_gnu_entity): Call it to add the original type as a parallel
	type to the implementation type of a packed array type.
	<E_Procedure>: Remove now obsolete kludge.
	<E_Exception>: Delete obsolete comment.
	<object>: Small tweak.
	<E_Subprogram_Type>: Remove support for stub subprograms, as well as
	for the descriptor passing mechanism.
	(gnat_to_gnu_param): Likewise.
	* gcc-interface/misc.c (gnat_init_gcc_fp): Remove special case.
	(gnat_print_type): Adjust.
	* gcc-interface/trans.c (gigi): Remove obsolete initializations.
	(vms_builtin_establish_handler_decl): Delete.
	(gnat_vms_condition_handler_decl): Likewise.
	(establish_gnat_vms_condition_handler): Likewise.
	(build_function_stub): Likewise.
	(Subprogram_Body_to_gnu): Do not call above functions.
	(Call_to_gnu): Remove support for the descriptor passing mechanism.
	* gcc-interface/utils.c (make_descriptor_field): Delete.
	(build_vms_descriptor32): Likewise.
	(build_vms_descriptor): Likewise.
	(fill_vms_descriptor): Likewise.
	(convert_vms_descriptor64): Likewise.
	(convert_vms_descriptor32): Likewise.
	(convert_vms_descriptor): Likewise.
	* gcc-interface/utils.c (unchecked_convert): Likewise.
	* gcc-interface/utils2.c (maybe_wrap_malloc): Remove obsolete stuff.

2014-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (gigi): Use gnat_to_gnu_type for the exception
	type and get_unpadded_type for the longest FP type.
	(Attribute_to_gnu) <Machine>: Compare the precision of the types.
	(convert_with_check): Adjust formatting and remove FIXME.

2014-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <E_Signed_Integer_Subtype>:
	Do not convert the RM bounds to the base type.
	(E_Floating_Point_Subtype): Likewise.
	(E_Array_Subtype): Convert the bounds to the base type.
	* gcc-interface/trans.c (get_type_length): New function.
	(Attribute_to_gnu) <Range_Length>: Call it.
	<Length>: Likewise.
	(Loop_Statement_to_gnu): Convert the bounds to the base type.
	(gnat_to_gnu) <N_In>: Likewise.
	* gcc-interface/utils.c (make_type_from_size): Do not convert the RM
	bounds to the base type.
	(create_range_type): Likewise.
	(convert): Convert the bounds to the base type for biased types.
	* gcc-interface/utils2.c (compare_arrays): Convert the bounds to the
	base type.

2014-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (gnat_to_gnu) <N_Selected_Component>: Remove
	incorrect implicit type derivation.
	* gcc-interface/utils.c (max_size) <tcc_reference>: Convert the bounds
	to the base type.

2014-08-01  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_attr.adb (Analyze_Attribute): Preanalyze and resolve the
	prefix of attribute Loop_Entry.
	* sem_prag.adb (Analyze_Pragma): Verify the placement of pragma
	Loop_Variant with respect to an enclosing loop (if any).
	(Contains_Loop_Entry): Update the parameter profile and all
	calls to this routine.
	* sem_res.adb (Resolve_Call): Code reformatting. Do not ask
	for the corresponding body before determining the nature of the
	ultimate alias's declarative node.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* gnat1drv.adb, sem_ch4.adb: Minor reformatting.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_eval.adb (Rewrite_In_Raise_CE): Don't try to reuse inner
	constraint error node since it is a list member.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_warn.adb: Minor reformatting.

2014-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* einfo.adb (Underlying_Type): Return the underlying full view
	of a private type if present.
	* freeze.adb (Freeze_Entity):
	Build a single freeze node for partial, full and underlying full
	views, if any.
	* gcc-interface/decl.c (gnat_to_gnu_entity) <E_Private_Type>: Add a
	missing guard before the access to the Underlying_Full_View.
	* gcc-interface/trans.c (process_freeze_entity): Deal with underlying
	full view if present.
	* gcc-interface/utils.c (make_dummy_type): Avoid superfluous work.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Resolve_Entry_Call): When an entry has
	preconditions, the entry call is wrapped in a procedure call
	that incorporates the precondition checks. To prevent a double
	expansion, with possible duplication of extra formals, that
	procedure call must only be pre-analyzed and resolved. Expansion
	takes place upon return to the caller Resolve_Call.

2014-08-01  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_res.adb (Resolve_Call): Do not perform
	GNATprove-specific inlining while within a generic.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Analyze_Case_Expression): Handle properly a
	case expression with incompatible alternatives, when the first
	alternative is overloaded.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Check_Parameterless_Call): Use Relocate_Node
	to create the name of the parameterless call, rather than
	New_Copy, to preserve the tree structure when the name is a
	complex expression, e.g. a selected component that denotes a
	protected operation, whose prefix is itself a selected component.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Use
	Unit_Declaration_Node to retrieve body when inlining, to handle
	properly subprogram child units.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_attr.adb: Minor reformatting.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* debug.adb: Minor documentation addition for -dn switch.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_aggr.adb, exp_ch9.adb, sem_prag.adb, sem_util.adb,
	sem_attr.adb, sem_eval.ads, sem_cat.adb, sem_ch13.adb: Improve
	documentation of Is_Static_Expression vs Is_OK_Static_Expression.
	In several places, use the Is_OK version as suggested by the spec.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* gnatcmd.adb: Revert last change which was not correct.

2014-08-01  Hristian Kirtchev  <kirtchev@adacore.com>

	* freeze.adb (Find_Constant): Ensure that the constant being
	inspected is still an object declaration (i.e. not a renaming).

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Loop_Parameter_Specification): a)
	An attribute_reference to Loop_Entry denotes an iterator
	specification: its prefix is an object, as is the case for 'Old.
	b) If the domain of iteration is an expression whose type has
	the Iterable aspect defined, this is an iterator specification.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* gnatcmd.adb: Minor reformatting.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* atree.ads (Info_Messages): New counter.
	* err_vars.ads: Minor comment update.
	* errout.adb (Delete_Warning_And_Continuations): Deal
	with new Info_Messages counter.
	(Error_Msg_Internal): ditto.
	(Delete_Warning): ditto.
	(Initialize): ditto.
	(Write_Error_Summary): ditto.
	(Output_Messages): ditto.
	(To_Be_Removed): ditto.
	* erroutc.adb (Delete_Msg): Deal with Info_Messages counter.
	(Compilation_Errors): ditto.
	* errutil.adb (Error_Msg): Deal with Info_Messages counter.
	(Finalize): ditto.
	(Initialize): ditto.
	* sem_prag.adb (Analyze_Pragma): Minor comment addition.
	* gnat_ugn.texi: Document that -gnatwe does not affect info
	messages.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Document debug switch -gnatd.Z.
	* sem.adb (Semantics): Force expansion on in no or configurable
	run time mode.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Loop_Parameter_Specification): An
	unchecked conversion denotes an iterator specification. Such a
	conversion will be inserted in the context of an inlined call
	when needed, and its argument is always an object.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* make.adb, makeutl.ads: Minor reformatting.
	* debug.adb, opt.ads: Clarify documentation of Front_End_Inlining and
	Back_End_Inlining.

2014-08-01  Tristan Gingold  <gingold@adacore.com>

	* gnatcmd.adb (GNATCmd): Set AAMP_On_Target using command name.

2014-08-01  Javier Miranda  <miranda@adacore.com>

	* gnat1drv.adb (Adjust_Global_Switches): Reverse meaning of
	-gnatd.z.
	* debug.adb: Updating documentation.
	* exp_ch6.adb (Expand_Call): Remove assertion.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_aggr.adb, sem_ch3.adb, sem_ch5.adb, sem_util.adb,
	sem_res.adb: Minor reformatting.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* make.adb (Initialize): Set Keep_Temporary_Files to True when
	-dn is specified.
	* makeusg.adb: Add line for new switch --keep-temp-files.
	* makeutl.ads (Keep_Temp_Files_Option): New constant String.
	* opt.ads (Keep_Temporary_Files): Document that it is also used
	by gnatmake and gprbuild.
	* switch-m.adb: Recognize new switch --keep-temp-files.

2014-08-01  Tristan Gingold  <gingold@adacore.com>

	* sem_ch9.adb (Analyze_Task_Type_Declaration): Move code from ...
	* exp_ch9.adb (Make_Task_Create_Call): ... here.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* gnat1drv.adb: Do not try to get the target parameters when
	invoked with -gnats.

2014-08-01  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch7.adb (Find_Last_Init): Nothing to do for an object
	declaration subject to No_Initialization.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_aggr.adb (Resolve_Array_Aggregate): Reject choice that
	is a subtype with dynamic predicates, or a non-static subtype
	with predicates.
	* sem_ch3.adb (Analyze_Number_Declaration): Reject qualified
	expression if subtype has a dynamic predicate.
	(Constrain_Index): Reject subtype indication if subtype mark
	has predicates.
	(Inerit_Predicate_Flags): Inherit Has_Predicates as well.
	(Make_Index): If index is a subtype indication, itype inhereits
	predicate flags for subsequent testing.
	* sem_ch5.adb (Analyze_Loop_Parameter_Specification): New
	procedure Check_Predicate_Use, to reject illegal uses of domains
	of iteration that have dynamic predicates.
	* sem_res.adb (Resolve_Slice): Reject slices given by a subtype
	indication to which a predicate applies.
	* sem_util.adb (Bad_Predicated_Subtype_Use): Add guard to
	prevent cascaded errors when subtype is invalid.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_ch10.adb: Minor reformatting.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Same_Generic_Actual): Make function symmetric,
	because either type may be a subtype of the other.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* makeusg.adb: Add documentation for debug switch -dn.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_dim.adb (Process_Minus, Process_Divide): Label dimension
	expression with standard operator and type, for pretty-printing
	use, when in ASIS_Mode. When generating code dimensional analysis
	is not involved and dimension expressions are handled statically,
	and other operators are resolved in the usual way.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Build_Derived_Record_Type): Remove setting of
	Parent_Subtype in ASIS mode, leads to several failures.
	* sem_ch4.adb (Analyze_Selected_Component): In an instance,
	if the prefix is a type extension, check whether component is
	declared in the parent type, possibly in a parent unit. Needed
	in ASIS mode when Parent_Subtype is not set.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb: Minor reformatting.
	* s-regpat.adb: Minor reformatting.
	* sem_ch3.adb (Analyze_Object_Declaration): Do not set
	Treat_As_Volatile on constants.

2014-08-01  Tristan Gingold  <gingold@adacore.com>

	* exp_ch9.adb (Make_Task_Create_Call): Improve error message.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch10.adb (Analyze_Compilation_Unit): Do not place a
	warning on a with_clause created for the renaming of a parent
	unit in an explicit with_clause.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications, case Aspect_Import):
	Set Is_Imported flag at once, to simplify subsequent legality
	checks. Reject the aspect on an object whose declaration has an
	explicit initial value.
	* sem_prag.adb (Process_Import_Or_Interface): Use original node
	to check legality of an initial value for an imported entity.
	Set Is_Imported flag in case of error to prevent cascaded errors.
	Do not set the Is_Imported flag if the pragma comes from an
	aspect, because it is already done when analyzing the aspect.

2014-08-01  Emmanuel Briot  <briot@adacore.com>

	* g-regpat.adb (Parse): Add support for non-capturing parenthesis.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_ch7.adb, einfo.adb, einfo.ads, sem_ch13.adb: Minor change of
	identifier name.

2014-08-01  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Analyze_Object_Contract): Enable the volatility
	checks when the related variable comes from source.
	* sem_res.adb (Resolve_Actuals): Enable the volatility checks
	when the related actual parameter comes from source. Update comment.
	* freeze.adb (Freeze_Record_Type): Do not freeze the designated
	type of an array of pointers when the designated type is
	class-wide and its root type is the record being currently frozen.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Iterator_Specification): Preserve Ekind
	of renaming declaration created for domain of iteration.
	* sem_aggr.adb (Resolve_Array_Aggregate): Better placement
	for error messages on aggregates whose index subtypes have
	predicates. The new placement avoids posting messages on previous
	subtype declarations rather than on the aggregate itself.
	* sem_disp.adb (Is_Inherited_Public_Operation): New predicate for
	Add_Dispatching_Operation, to handle properly the overriding of
	the predefined operations on controlled types, when the partial
	view of a type is not visibly controlled.

2014-08-01  Ben Brosgol  <brosgol@adacore.com>

	* gnat_ugn.texi: Add tutorial on portable fixed-point types as an
	appendix.

2014-08-01  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb (Is_Hidden_Non_Overridden_Subprogram): Remove the
	assertion check as the attribute is defined for all entities.
	(Set_Is_Hidden_Non_Overridden_Subprogram): Remove the assertion
	check as the attribute is defined for all entities.
	* einfo.ads Update the documentation of attribute
	Is_Hidden_Non_Overridden_Subprogram.
	* sem_ch7.adb (Install_Package_Entity): No need to check the
	entity kind of the Id.
	* sem_ch13.adb (Hide_Matching_Homograph): Update the comment on
	usage. Ensure that the homographs are of the same entity kind
	and not fully conformant.
	(Hide_Non_Overridden_Subprograms): Update the comment on usage.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* inline.adb: Minor code reorganization.
	* sem_ch12.adb, s-tasdeb.ads: Minor reformatting.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* inline.adb, s-os_lib.ads: Minor reformatting.

2014-08-01  Arnaud Charlet  <charlet@adacore.com>

	* s-tasdeb.ads, s-tasdeb.adb (Master_Hook, Master_Completed_Hook): New.
	* s-tassta.adb (Task_Wrapper, Vulnerable_Complete_Master): Call new
	hooks.

2014-08-01  Yannick Moy  <moy@adacore.com>

	* inline.adb (Cannot_Inline): Issue info message instead of
	warning for subprograms not inlined in GNATprove mode.
	* sem_res.adb (Resolve_Call): Take body into account for deciding
	whether subprogram can be inlined in GNATprove mode or not.

2014-08-01  Claire Dross  <dross@adacore.com>

	* exp_util.ads (Get_First_Parent_With_Ext_Axioms_For_Entity): Renaming
	of Get_First_Parent_With_External_Axiomatization_For_Entity for
	shorter.
	* sem_ch12.adb (Analyze_Associations): Only call Build_Wrapper
	for parameters of packages with external axiomatization.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_res.adb: Minor comment addition.

2014-08-01  Arnaud Charlet  <charlet@adacore.com>

	* s-crtl.ads, i-cstrea.ads, adaint.c, adaint.h, osint.adb,
	s-fileio.adb (__gnat_fopen, __gnat_freopen): Remove vms_form parameter,
	no longer used.
	* s-os_lib.ads: Minor reformatting.

2014-08-01  Arnaud Charlet  <charlet@adacore.com>

	* exp_attr.adb (Is_Inline_Floating_Point_Attribute): Restore more
	completely previous code since only GCC back-ends are prepared
	to handle e.g. 'Machine attribute.
	* targparm.adb, targparm.ads: Remove remaining refs and
	handling of OpenVMS_On_Target, VAX_Float_On_Target and
	RTX_RTSS_Kernel_Module_On_Target.
	* hostparm.ads (OpenVMS, Max_Debug_Name_Length): Removed,
	no longer used.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* exp_dist.adb, exp_attr.adb: Minor reformatting.
	* sem_ch3.adb, mlib-tgt-specific-hpux.adb, a-direct.ads,
	a-synbar-posix.adb, exp_ch9.adb, sem_ch10.adb, sem_prag.adb,
	sem_ch12.adb, sem.ads, sem_res.adb, s-exctra.adb, s-soflin.ads,
	g-alveop.ads, sem_ch8.adb, vxaddr2line.adb, sem_cat.ads: Remove
	improper use of shall.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_aggr.adb, exp_atag.adb, layout.adb, nlists.adb, nlists.ads,
	exp_attr.adb, exp_ch9.adb, par-ch12.adb, exp_aggr.adb,
	exp_ch3.adb: Minor reformatting & code reorganization.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Remove VMS specific rules for pragma Ident.
	* Makefile.rtl, adaint.c, gnat_rm.texi, s-asthan.adb, s-asthan.ads,
	s-filofl.ads, s-fishfl.ads, s-fvadfl.ads, s-fvaffl.ads, s-fvagfl.ads,
	s-po32gl.adb, s-po32gl.ads, s-vaflop.adb, s-vaflop.ads, s-vmexta.adb,
	s-vmexta.ads, sem_vfpt.adb, sem_vfpt.ads, socket.c: Remove VMS specific
	code.
	* gcc-interface/decl.c, gcc-interface/Makefile.in,
	gcc-interface/Make-lang.in: Ditto. Also remove refs to rTX.

2014-08-01  Pascal Obry  <obry@adacore.com>

	* s-os_lib.ads: Rename File_Size to Large_File_Size.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* a-numaux-vxworks.ads, a-numaux-x86.adb, a-numaux-x86.ads,
	a-numaux-darwin.adb, a-numaux-darwin.ads, a-numaux.ads,
	a-numaux-libc-x86.ads: Fix bad package header comments.
	* elists.ads, elists.adb (Append_New_Elmt): New procedure.
	* gnat_rm.texi, a-calend.adb, gnatcmd.adb, einfo.adb, einfo.ads,
	checks.adb, sem_prag.adb, sem_prag.ads, rtsfind.ads, freeze.adb,
	sem_util.adb, sem_attr.adb, exp_dbug.adb, exp_dbug.ads, gnat1drv.adb,
	targparm.adb, targparm.ads, exp_ch6.adb, switch-b.adb, s-shasto.ads,
	stand.ads, s-auxdec.ads, opt.adb, opt.ads, mlib-tgt.ads, s-fatgen.adb,
	s-fatgen.ads, system.ads, snames.ads-tmpl, s-stalib.ads,
	s-os_lib.adb: Remove VMS-specific code.

2014-08-01  Arnaud Charlet  <charlet@adacore.com>

	* exp_attr.adb (Is_Inline_Floating_Point_Attribute): Revert to
	previous state in CodePeer_Mode.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* hostparm.ads: Put back definition of OpenVMS as False to aid
	the transition process.
	* sem_ch7.adb: Minor reformatting.
	* prj-env.adb: Minor code fix.
	* gnat_rm.texi: Complete previous change.
	* sem_ch3.adb: Minor reformatting.
	* sem_ch6.adb: Minor reformatting.
	* sem_elab.adb: Minor reformatting.
	* exp_strm.adb: Complete previous change.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* sem_warn.adb (Warn_On_Unreferenced_Entity): Do not issue a
	warning when a constant is unreferenced and its type has pragma
	Unreferenced_Objects.

2014-08-01  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb: Flag2 is now known as
	Is_Hidden_Non_Overridden_Subprogram.
	(Is_Hidden_Non_Overridden_Subprogram): New routine.
	(Set_Is_Hidden_Non_Overridden_Subprogram): New routine.
	(Write_Entity_Fields): Output Flag2.
	* einfo.ads: New attribute Is_Hidden_Non_Overridden_Subprogram
	along with occurrences in entities.
	(Is_Hidden_Non_Overridden_Subprogram): New routine and pragma Inline.
	(Set_Is_Hidden_Non_Overridden_Subprogram): New routine
	and pragma Inline.
	* sem_ch7.adb (Install_Package_Entity): Do not enter implicitly
	declared non-overriden homographs into visibility.
	* sem_ch13.adb (Freeze_Entity_Checks): Hide all
	implicitly declared non-overriden homographs.
	(Hide_Non_Overridden_Subprograms): New routine.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* snames.ads-tmpl, s-os_lib.adb, s-os_lib.ads, s-fileio.adb: Remove
	VMS-specific code.
	* prj-conf.adb: Minor reformatting.
	* xr_tabls.adb (Read_File): Restore code which was enabled on
	non VMS platforms before.
	* prj-env.adb (Initialize_Default_Project_Path): Ditto.
	* sem_ch5.adb: Minor reformatting.
	* lib-writ.adb, lib-writ.ads, bindgen.adb, sem_vfpt.adb,
	sem_vfpt.ads, ali.adb, ali.ads, opt.ads, bcheck.adb, exp_strm.adb:
	Remove VMS-specific code.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* make.adb (Await_Compile): Remove loop that was only needed
	for VMS.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* a-calcon.ads, a-direct.adb, a-dirval-mingw.adb, a-dirval.adb,
	a-dirval.ads, a-except-2005.adb, a-excpol-abort.adb,
	a-numaux-darwin.ads, a-numaux.ads, bindgen.adb, bindusg.adb,
	einfo.adb, einfo.ads, err_vars.ads, errout.ads, errutil.adb,
	exp_ch3.adb, exp_ch4.adb, exp_ch7.adb, exp_ch7.ads, fname-uf.adb,
	fname.adb, fname.ads, freeze.adb, g-debpoo.adb, g-dirope.ads,
	g-excact.ads, g-expect.ads, g-socket.adb, g-socket.ads, g-sothco.ads,
	g-traceb.ads, gnat_rm.texi, gnatlink.adb, gnatls.adb, i-cstrea.adb,
	krunch.adb, krunch.ads, layout.adb, lib-util.adb, make.adb,
	mlib.adb, osint-b.adb, osint-b.ads, osint-c.adb, osint.adb,
	osint.ads, output.ads, par.adb, prj-conf.adb, prj-env.adb,
	prj-makr.adb, prj-nmsc.adb, prj.adb, prj.ads, repinfo.adb, rtsfind.adb,
	rtsfind.ads, s-excmac-gcc.ads, s-fatgen.adb, s-mastop.ads,
	s-parame-ae653.ads, s-parame-hpux.ads, s-parame-vxworks.ads,
	s-parame.ads, s-soflin.ads, s-stoele.adb, s-tasini.adb,
	s-taspri-dummy.ads, s-taspri-hpux-dce.ads, s-taspri-mingw.ads,
	s-taspri-posix-noaltstack.ads, s-taspri-posix.ads,
	s-taspri-solaris.ads, s-taspri-vxworks.ads, s-trasym.ads,
	sem_ch12.adb, sem_ch4.adb, sem_eval.adb, sem_intr.adb, sem_mech.adb,
	sem_mech.ads, sem_prag.adb, sem_res.adb, sem_util.adb, sem_util.ads,
	sinfo.adb, sinfo.ads, sinput-c.adb, symbols.ads, targparm.adb,
	treepr.adb, types.ads, xr_tabls.adb, xr_tabls.ads: Remove VMS
	specific code and comments.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Iterator_Specification): New procedure
	Check_Reverse_Iteration, to verify the legality of the Reverse
	indicator on various container types, and to detect illegal
	reverse iterations on containers that only supoort forward
	iteration.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* gnatcmd.adb: Remove the VMS specific stuff.  Integrate in
	procedure GNATCmd the relevant declarations from packages VMS_Cmds
	and VMS_Conv.
	* gnatcmd.ads: Update comments to remove any trace of VMS

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb: sem_ch12.adb (Build_Wrapper): Capture entity for
	defaulted actual that is an operator, before building wrapper
	for it in GNATprove mode. Restrict construction of wrapper to
	actuals that are operators.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* vms_conv.adb, vms_conv.ads, vms_data.ads, vms_cmds.ads: Remove VMS
	specific packages no longer needed.

2014-08-01  Pascal Obry  <obry@adacore.com>

	* s-os_lib.ads (System.CRTL): Move with clause to body.
	(File_Size): New type.
	(File_Length64): Use it.
	(File_Length): Restore previous spec returning a Long_Integer.
	* s-os_lib.adb (System.CRTL): Move with clause here.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* mlib-prj.adb: Update comments to remove any mention of VMS.

2014-08-01  Arnaud Charlet  <charlet@adacore.com>

	* ug_words, xgnatugn.adb, gcc-interface/Make-lang.in: Remove
	xgnatugn.adb and ug_words.

2014-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* exp_attr.adb (Expand_N_Attribute_Reference): Check whether
	expansion can be avoid for Machine, Model and Rounding.
	(Is_Inline_Floating_Point_Attribute): Return true for Machine
	& Model, as well as Rounding if wrapped in a conversion to an
	integer type.
	* sem_res.adb (Simplify_Type_Conversion): Deal with Rounding as well.
	* gcc-interface/gigi.h (fp_arith_may_widen): Declare.
	* gcc-interface/utils.c (fp_arith_may_widen): New global variable.
	* gcc-interface/misc.c (enumerate_modes): Compute it.
	* gcc-interface/trans.c (FP_ARITH_MAY_WIDEN): Delete.
	(lvalue_required_for_attribute_p): Deal with Descriptor_Size,
	Machine and Model.
	(Attribute_to_gnu) <Attr_Model>: New case.
	<Attr_Machine>): Likewise.
	(convert_with_check): Test
	fp_arith_may_widen variable.

2014-08-01  Pascal Obry  <obry@adacore.com>

	* adaint.h (GNAT_FOPEN): New definition for Windows.
	(GNAT_OPEN): Likewise.
	(GNAT_STAT): Likewise.
	(GNAT_FSTAT): Likewise.
	(GNAT_LSTAT): Likewise.
	(GNAT_STRUCT_STAT): Likewise.
	* adaint.c (__gnat_stat): Fix computation of file size for
	Windows.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* Makefile.rtl: Minor comment update.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* Make-generated.in: Remove dependencies for vms-help.

2014-08-01  Gary Dismukes  <dismukes@adacore.com>

	* makeutl.ads, opt.ads: Minor grammar fixes.
	* makeutl.adb: Minor code reorganization.

2014-08-01  Arnaud Charlet  <charlet@adacore.com>

	* gcc-interface/Makefile.in, gcc-interface/Make-lang.in,
	gnatsym.adb: Remove gnatsym (VMS only tool).

2014-08-01  Ben Brosgol  <brosgol@adacore.com>

	* gnat_ugn.texi, projects.texi, xgnatugn.adb: Removed all VMS
	conditionalization from gnat_ugn.texi and projects.texi, and updated
	(considerably simplified) xgnatugn.adb, to be removed soon.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* debug.adb: Remove doc for gnatmake/gprbuild switch -ds.
	* make.adb (List_Bad_Compilations): Use Opt.No_Exit_Message
	instead of Debug.Debug_Flag_S.
	* makeutl.adb (Finish_Program, Fail_Program): Use Opt flag
	No_Exit_Message instead of Debug.Debug_Flag_S to suppress exit
	error messages.
	* makeutl.ads (No_Exit_Message_Option): New constant string
	for switch --no-exit-message.
	* opt.ads (No_Exit_Message): New Boolean flag, defaulted to False.
	* switch-m.adb (Scan_Make_Switches): Recognize new switch
	--no-exit-message.

2014-08-01  Arnaud Charlet  <charlet@adacore.com>

	* exp_vfpt.adb, exp_vfpt.ads: Removed, no longer used.
	* gcc-interface/Make-lang.in: Remove exp_vfpt.o

2014-08-01  Javier Miranda  <miranda@adacore.com>

	* inline.ads (Inlined_Calls, Backend_Calls,
	Backend_Inlined_Subps, Backend_Not_Inlined_Subps): Declarations
	moved to inline.adb (Cannot_Inline): Update documentation.
	(Check_And_Build_Body_To_Inline): Renamed.
	(List_Inlining_Info): Subprogram moved here from package exp_ch6.
	* inline.adb (Check_Inlining_Restrictions): New local variable.
	(Inlined_Calls, Backend_Calls, Backend_Inlined_Subps,
	Backend_Not_Inlined_Subps): Declarations moved here
	from inline.ads (Number_Of_Statements): Removed.
	(Remove_Pragmas): Avoid duplicated version of this subprogram.
	(Build_Body_To_Inline): Code cleanup.
	(Build_Body_To_Inline.Has_Excluded_Statament): Removed.
	(Check_And_Build_Body_To_Inline): Renamed. Code cleanup.
	(Check_Body_To_Inline): Removed.
	(Generate_Body_To_Inline): Renamed as Generate_Subprogram_Body.
	(Has_Excluded_Declaration): No action if not
	Check_Inlining_Restrictions.
	(Has_Excluded_Statement): No action if not Check_Inlining_Restrictions.
	(Initialize): Initialize the lists of inlined calls and subprograms.
	(List_Inlining_Info): Subprogram moved here from package exp_ch6.
	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Update call
	to Check_And_Build_Body_To_Inline since it has been renamed as
	Check_And_Split_Unconstrained_Function
	* exp_ch6.ad[sb] (List_Inlining_Info): Subprogram moved to
	package inline.
	* gnat1drv.adb Update call to Inline.List_Inlining_Info.

2014-08-01  Vincent Celier  <celier@adacore.com>

	* debug.adb: Add documentation for new debug switch -ds.
	* make.adb (List_Bad_Compilations): Do not issue any message
	when switch -ds is specified.
	* makeutl.adb (Fail_Program): Do not issue any message when
	-ds is specified.
	(Finish_Program): Ditto.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* s-exnint.adb, s-exnint.ads, s-wwdwch.ads, s-carsi8.ads,
	s-casi32.ads, indepsw.adb, a-timoau.ads, s-explli.adb, s-explli.ads,
	s-casi16.ads, s-powtab.ads, g-wistsp.ads, a-ztmoau.adb,
	indepsw-gnu.adb, s-imgllb.ads, types.adb, gnat.ads, s-proinf.adb,
	indepsw-aix.adb, s-caun64.ads, s-imgllw.ads, s-traces-default.adb,
	s-vxwork-x86.ads, s-expllu.adb, s-exnlli.adb, s-exnlli.ads,
	s-traces.adb, widechar.ads, stand.adb, s-expint.adb,
	s-tratas-default.adb, s-expint.ads, s-geveop.ads, s-caun32.ads,
	s-expuns.adb, s-mantis.adb, s-mantis.ads, s-caun16.ads, s-tasinf.adb,
	s-memcop.ads, s-dsaser.ads, s-imgbiu.ads, a-szmzco.ads, g-strspl.ads,
	s-casi64.ads, g-zstspl.ads, indepsw-mingw.adb, tree_io.adb,
	s-boarop.ads, uname.ads, s-fore.adb, s-fore.ads, g-timsta.adb,
	g-timsta.ads, s-assert.adb, s-vector.ads, s-tratas.adb,
	s-tratas.ads: Minor fix to copyright notices.

2014-08-01  Eric Botcazou  <ebotcazou@adacore.com>

	* sinfo.ads: Remove long obsolete comment.
2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb: Add guard to setting of No_Predicate_On_Actual.
	* sem_ch3.adb: Minor reformatting.

2014-08-01  Pascal Obry  <obry@adacore.com>

	* cstreams.c: Only enable large file support on know supported
	platforms. Add missing defines/includes.

2014-08-01  Ed Schonberg  <schonberg@adacore.com>

	* einfo.ads, einfo.adb New flags No_Predicate_On_Actual and
	No_Dynamic_Predicate_On_Actual, to enforce the generic contract
	on generic units that contain constructs that forbid subtypes
	with predicates.
	* sem_ch3.adb (Analyze_Subtype_Declaration, Process_Subtype):
	Inherit flags indicating the presence of predicates in subtype
	declarations with and without constraints.
	(Inherit_Predicate_Flags): Utility for the above.
	* sem_util.adb (Bad_Predicated_Subtype_Use): In a generic context,
	indicate that the actual cannot have predicates, and preserve
	warning. In an instance, report error if actual has predicates
	and the construct appears in a package declaration.
	* sem_ch12.adb (Diagnose_Predicated_Actual): Report error
	for an actual with predicates, if the corresponding formal
	carries No_Predicate_On_Actual or (in the case of a loop)
	No_Dynamic_Predicate_On_Actual.
	* sem_ch13.adb (Build_Predicate_Functions); Do not build a
	Static_Predicate function if the type is non-static (in the
	presence of previous errors),
	* sem_ch5.adb (Analyze_Loop_Parameter_Specification): Set flag
	No_Dynamic_Predicate_On_Actual in a generic context, to enforce
	generic contract on actuals that cannot have predicates.

2014-08-01  Pascal Obry  <obry@adacore.com>

	* a-direct.adb (C_Size): Returns an int64.
	* osint.adb (System.CRTL): New with clause.
	(File_Length.Internal): Returns an int64.
	* s-os_lib.ads (File_Length): Returns an int64.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* gnatchop.adb, gnatcmd.adb, make.adb, mlib-prj.adb, bindgen.adb,
	mlib.ads, butil.adb, clean.adb, binde.adb, gnatls.adb, gnatname.adb,
	osint.adb, krunch.adb: Minor reformatting.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* inline.adb, inline.ads, fe.h, einfo.adb, einfo.ads, sem_util.adb,
	sem_util.ads, exp_ch4.adb, exp_ch11.adb, exp_ch6.adb, cstand.adb,
	sem_mech.adb, sem_ch6.adb, sem_ch8.adb, sem_ch11.adb, snames.ads-tmpl:
	Remove VMS-specific code.
	* gcc-interface/decl.c, gcc-interface/trans.c: Ditto.

2014-08-01  Arnaud Charlet  <charlet@adacore.com>

	* binde.adb, bindgen.adb, butil.adb, clean.adb, gnatbind.adb,
	gnatchop.adb, gnatcmd.adb, gnatls.adb, gnatname.adb, krunch.adb,
	make.adb, makeutl.adb, memtrack.adb, mlib-prj.adb, mlib.adb,
	mlib.ads, tempdir.adb: Remove VMS handling.

2014-08-01  Pascal Obry  <obry@adacore.com>

	* adaint.h, adaint.c (__gnat_file_length): Returns an __int64.
	(__gnat_named_file_length): Likewise.
	(__gnat_file_length_attr): Likewise.
	* a-direct.adb (C_Size): Use size_t as returned type.
	* osint.adb (File_Length): Adjust spec for Internal routine
	(returns size_t).
	* s-os_lib.adb (File_Length): Now returns a CRTL.size_t.
	(System.CRTL): With claused moved to spec.
	* s-os_lib.ads (System.CRTL): With clause moved to here.

2014-08-01  Pascal Obry  <obry@adacore.com>

	* adaint.h, adaint.c (__gnat_open): Added.
	* s-crtl.ads (open): Import __gnat_open for large file support.

2014-08-01  Robert Dewar  <dewar@adacore.com>

	* sem_case.adb (Dup_Choice): Improve message for integer constants.

2014-08-01  Arnaud Charlet  <charlet@adacore.com>

	* gnatlink.adb: Remove special handling of VMS, RTX and JVM.

2014-08-01  Pascal Obry  <obry@adacore.com>

	* adaint.h (GNAT_OPEN): Defines as open64 where supported.
	* adaint.c (GNAT_OPEN): Uses new macro where needed.

2014-07-31  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/utils.c (lookup_and_insert_pad_type): New function
	extracted from...
	(maybe_pad_type): ...here.  Call it to canonicalize the pad type.
	* gcc-interface/gigi.h: Update comment.

2014-07-31  Javier Miranda  <miranda@adacore.com>

	* debug.adb Remove documentation of -gnatd.k (no longer needed).
	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Code cleanup.
	* inline.ads (Backend_Inlined_Subps): New
	Elist.	(Backend_Not_Inlined_Subps): New Elist.
	(Has_Excluded_Declaration): Declaration previously located in
	* inline.adb (Has_Excluded_Statement): Declaration previously
	located in inline.adb
	* inline.adb (Has_Single_Return): Moved out of
	Build_Body_To_Inline to avoid having duplicated code.
	(Number_Of_Statements): New subprogram.
	(Register_Backend_Inlined_Subprogram): New subprogram.
	(Register_Backend_Not_Inlined_Subprogram): New subprogram.
	(Add_Inlined_Subprogram): Register backend inlined subprograms and
	also register subprograms that cannot be inlined by the backend.
	(Has_Excluded_Declaration): Moved out of Build_Body_To_Inline
	to avoid having duplicated code.  Replace occurrences of
	Debug_Flag_Dot_K by Back_End_Inlining.
	* sem_res.adb (Resolve_Call): Code cleanup.
	* exp_ch6.adb (Expand_Call): Complete previous patch. Replace
	occurrence of Debug_Flag_Dot_K by Back_End_Inlining.
	(List_Inlining_Info): Add listing of subprograms passed to the
	backend and listing of subprograms that cannot be inlined by
	the backend.
	* sem_ch12.adb, sem_ch3.adb Replace occurrences of
	Debug_Flag_Dot_K by Back_End_Inlining.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* nlists.ads: Minor code fix (remove unwise Inline for
	List_Length).

2014-07-31  Arnaud Charlet  <charlet@adacore.com>

	* einfo.adb: Remove VMS specific code.
	* exp_attr.adb: Remove VAX specific code.
	* set_targ.adb: Remove handling of VAX_Float.
	* sem_vfpt.adb: Remove references to Vax_Native.
	* sem_attr.adb (Is_VAX_Float): Remove ref to VAX_Native.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* sem_ch4.adb: Minor reformatting.

2014-07-31  Arnaud Charlet  <charlet@adacore.com>

	* gcc-interface/trans.c, gcc-interface/misc.c: Remove references
	to VMS. Misc clean ups.
	* gcc-interface/Makefile.in (gnatlib-shared-vms): Remove.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* cstand.adb, einfo.adb, einfo.ads, errout.adb, exp_attr.adb,
	exp_prag.adb, frontend.adb, interfac.ads,
	par-prag.adb, s-auxdec.ads, s-filofl.ads, s-fishfl.ads, s-fvadfl.ads,
	s-fvaffl.ads, s-fvagfl.ads, s-vaflop.ads, sem_attr.adb, sem_attr.ads,
	sem_ch13.adb, sem_ch3.adb, sem_ch8.adb, sem_prag.adb, snames.adb-tmpl,
	snames.ads-tmpl: Remove obsolete VMS-specific code.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, sem_ch13.adb: Minor reformatting.

2014-07-31  Arnaud Charlet  <charlet@adacore.com>

	* a-intnam-linux.ads: Minor: update obsolete comments.
	* s-taasde.adb: Minor: fix comment header.

2014-07-31  Arnaud Charlet  <charlet@adacore.com>

	* s-auxdec-vms-ia64.adb, s-parame-vms-alpha.ads, s-asthan-vms-alpha.adb,
	s-tpopde-vms.adb, s-mastop-vms.adb, s-tpopde-vms.ads, s-taprop-vms.adb,
	mlib-tgt-vms_common.adb, mlib-tgt-vms_common.ads, s-inmaop-vms.adb,
	g-enblsp-vms-alpha.adb, s-ransee-vms.adb, s-osprim-vms.adb,
	s-osprim-vms.ads, g-socthi-vms.adb, g-socthi-vms.ads, system-vms_64.ads,
	s-osinte-vms.adb, s-osinte-vms.ads, g-eacodu-vms.adb,
	s-vaflop-vms-alpha.adb, s-parame-vms-ia64.ads, a-dirval-vms.adb,
	a-caldel-vms.adb, mlib-tgt-specific-vms-alpha.adb, s-tasdeb-vms.adb,
	symbols-vms.adb, a-intnam-vms.ads, g-expect-vms.adb,
	symbols-processing-vms-alpha.adb, mlib-tgt-specific-vms-ia64.adb,
	s-traent-vms.adb, s-traent-vms.ads, i-cstrea-vms.adb, a-numaux-vms.ads,
	symbols-processing-vms-ia64.adb, s-interr-vms.adb, s-memory-vms_64.adb,
	s-memory-vms_64.ads, g-enblsp-vms-ia64.adb, s-taspri-vms.ads,
	s-auxdec-vms_64.ads, s-intman-vms.adb, s-intman-vms.ads,
	s-tpopsp-vms.adb, s-asthan-vms-ia64.adb, a-calend-vms.adb,
	a-calend-vms.ads, system-vms-ia64.ads, s-auxdec-vms-alpha.adb: Removed.
	* namet.h (Is_Non_Ada_Error): Remove.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* exp_util.adb, lib-writ.adb, sem_ch12.adb, s-direio.adb: Minor
	reformatting.

2014-07-31  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_attr.adb (Expand_Loop_Entry_Attribute): Update the comment
	which demonstrates the expansion of while loops subject to
	attribute 'Loop_Entry. The condition of a while loop along with
	related condition actions is now wrapped in a function.  Instead
	of repeating the condition, the expansion now calls the function.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_case.adb (Check_Against_Predicate): Correct off-by-one
	error when reporting of missing values in a case statement for
	a type with a static predicate.
	(Check_Choices): Reject a choice given by a subtype to which a
	Dynamic_Predicate applies.
	* sem_ch3.adb (Analyze_Subtype_Declaration): Inherit
	Has_Dynamic_Predicate_Aspect flag from parent.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): A predicate
	cannot apply to a subtype of an incomplete type.
	(Is_Static_Choice): Treat an Others_Clause as static. The
	staticness of the expression and of the range are checked
	elsewhere.

2014-07-31  Pascal Obry  <obry@adacore.com>

	* adaint.h (__gnat_ftell64): Added.
	(__gnat_fseek64): Added.
	(__int64): Added.
	* cstreams.c (__int64): Removed.

2014-07-31  Pascal Obry  <obry@adacore.com>

	* a-stream.ads (Stream_Element_Offset): Now a signed 64bit type.
	* i-cstrea.ads, s-crtl.ads (fseek64): Offset is always a 64bit value.
	(ftell64): Always returns a 64bit value.
	* cstreams.c (int64): New definition.
	(_FILE_OFFSET_BITS): Set to 64 to enable 64bit offset support.
	(__gnat_ftell64): Always returns a 64bit value. The implemenation now
	uses ftello() on UNIX.
	(__gnat_fseek64): Offset is always a 64bit value. The
	implementation now uses fseeko() on UNIX.
	* a-ststio.adb, s-direio.adb (Set_Position): Simplify code,
	always use fseek64 to set the offset.
	(Size): Simplify code, always use fseek64/ftell64.
	* s-direio.ads (Count): Now an int64.
	* g-socket.ads (Vector_Element): Adjust definition for Length
	to be a size_t. This matches the C definition and avoid using
	a 64bit integer on 32bit platforms now that Count is always 64bit.
	* g-socthi-mingw.adb (Ada.Streams): Removed as not used anymore.
	(C_Recvmsg): Change some conversion to account for change in
	Vector_Element.
	(C_Sendmsg): Likewise.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* cstand.adb (Create_Standard): Remove handling of -gnatdm flag.
	* debug.adb: Remove documentation of -gnatdm flag.
	* gnat1drv.adb (Adjust_Global_Switches): Remove handling of
	-gnatdm flag.

2014-07-31  Arnaud Charlet  <charlet@adacore.com>

	* lib-writ.adb (Write_Unit_Information): Fix case where U =
	No_Unit.

2014-07-31  Claire Dross  <dross@adacore.com>

	* exp_util.adb, exp_util.ads
	(Get_First_Parent_With_External_Axiomatization_For_Entity):
	New routine to find the first parent of an entity with
	a pragma Annotate (GNATprove, External_Axiomatization).
	(Has_Annotate_Pragma_For_External_Axiomatization): New function
	to check if a package has a pragma Annotate (GNATprove,
	External_Axiomatization).
	* einfo.ads, einfo.adb (Is_Generic_Actual_Subprogram): New
	flag on the entity for the declaration created for a formal
	subprogram in an instance. This is a renaming declaration,
	or in GNATprove_Mode the declaration of an expression function
	that captures the axiomatization of the actual.
	* sem_ch6.adb (Analyze_Expression_Function): For a
	Generic_Actual_Subprogram, place body immediately after the
	declaration because it may be used in a subsequent declaration
	in the instance.
	* sem_ch12.adb (Build_Wrapper): Add code to handle instances where
	the actual is a function, not an operator. Handle functions with
	one and two parameters and binary and unary operators.

2014-07-31  Pascal Obry  <obry@adacore.com>

	* cstreams.c (__gnat_is_regular_file_fd): Removed.
	* adaint.c (__gnat_is_regular_file_fd): Added.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* exp_strm.adb: Minor reformatting.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Build_Wrapper): New procedure, subsidiary to
	Analyze_Associations, to create a wrapper around operators that
	are actuals to formal subprograms. This is done in GNATProve
	mode in order to propagate the contracts of the operators to
	the body of the instance.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Analyze_Attribute, case 'Old):  The reference is
	legal if within an aspect specification for a generic subprogram.

2014-07-31  Javier Miranda  <miranda@adacore.com>

	* gnat1drv.adb (Back_End_Inlining): Set to false if
	Suppress_All_Inlining is set.
	* debug.adb: Adding documentation for -gnatd.z.
	* inline.adb (Add_Inlined_Body): Extend the -gnatn2
	processing to -gnatn1 for calls to Inline_Always routines.
	(Add_Inlined_Subprogram): Remove previous patch.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Check_One_Function): Apply properly the static
	semantic rules for indexing aspects and the functions they denote.

2014-07-31  Javier Miranda  <miranda@adacore.com>

	* debug.adb: Complete documentation of -gnatd.z.

2014-07-31  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Minor doc fixes.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* sem_aggr.adb (Resolve_Array_Aggregate): Fix posting of missing
	index value.

2014-07-31  Tristan Gingold  <gingold@adacore.com>

	* s-unstyp.ads (Packed_Byte): Make this type universal aliasing.
	(Packed_Bytes1): Make component aliased.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* s-unstyp.ads, s-fileio.adb: Minor reformatting.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* inline.adb, gnat1drv.adb, exp_ch6.adb, s-fileio.adb: Minor
	reformatting.

2014-07-31  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/utils2.c ((build_binary_op): Don't set TREE_THIS_NOTRAP
	on array references here, now done more selectively in trans.c.

2014-07-31  Doug Rupp  <rupp@adacore.com>

	* gcc-interface/misc.c (gnat_init_gcc_fp(): Set flag_errno_math to 0.

2014-07-31  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_util.adb (Is_Effectively_Volatile): New routine.

2014-07-31  Fedor Rybin  <frybin@adacore.com>

	* gnat_ugn.texi: Document --test-duration option for gnattest.

2014-07-31  Javier Miranda  <miranda@adacore.com>
	    Eric Botcazou  <ebotcazou@adacore.com>

	* opt.ads (Back_End_Inlining): New variable which controls
	activation of inlining by back-end expansion.
	* gnat1drv.adb (Adjust_Global_Switches): Initialize Back_End_Inlining
	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Do not build
	the body to be inlined by the frontend if Back_End_Inlining
	is enabled.
	* exp_ch6.adb (Register_Backend_Call): Moved to inline.adb.
	(Expand_Call): If backend inlining is enabled let the backend to
	handle inlined subprograms.
	* inline.ads (Register_Backend_Call): Moved here from exp_ch6
	* inline.adb (Register_Backend_Call): Moved here from exp_ch6.
	(Add_Inlined_Subprogram): Add subprograms when Back_End_Inlining is set.
	(Must_Inline): Do not return Inline_Call if Back_End_Inlining is
	enabled.
	* debug.adb Document -gnatd.z
	* fe.h Import Back_End_Inlining variable.
	* gcc-interface/utils.c (create_subprog_decl): If Back_End_Inlining is
	enabled then declare attribute "always inline"
	* gcc-interface/decl.c, gcc-interface/trans.c,
	gcc-interface/gigi.h: Add handling of Inline_Always pragma.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* a-ngelfu.ads: Minor comment fix.

2014-07-31  Hristian Kirtchev  <kirtchev@adacore.com>

	* freeze.adb (Freeze_Record_Type): Replace all calls to
	Is_SPARK_Volatile with Is_Effectively_Volatile and update
	related comments.
	* sem_ch3.adb (Analyze_Object_Contract, Process_Discriminants):
	Replace all calls to Is_SPARK_Volatile with
	Is_Effectively_Volatile and update related comments.
	* sem_ch5.adb (Analyze_Iterator_Specification,
	Analyze_Loop_Parameter_Specification): Replace all calls to
	Is_SPARK_Volatile with Is_Effectively_Volatile and update
	related comments.
	* sem_ch6.adb (Process_Formals): Replace all calls to
	Is_SPARK_Volatile with Is_Effectively_Volatile and update
	related comments.
	* sem_ch12.adb (Instantiate_Object): Replace the call to
	Is_SPARK_Volatile_Object with Is_Effectively_Volatile_Object
	and update related comment.
	* sem_prag.adb (Analyze_External_Property_In_Decl_Part,
	Analyze_Global_Item): Replace all calls to Is_SPARK_Volatile
	with Is_Effectively_Volatile and update related comments.
	* sem_res.adb (Resolve_Actuals, Resolve_Entity_Name): Replace
	all calls to Is_SPARK_Volatile with Is_Effectively_Volatile and
	update related comments.
	* sem_util.adb (Has_Enabled_Property,
	Variable_Has_Enabled_Property): Replace all calls
	to Is_SPARK_Volatile with Is_Effectively_Volatile and
	update related comments.
	(Is_Effectively_Volatile): New routine.
	(Is_Effectively_Volatile_Object): New routine.
	(Is_SPARK_Volatile): Removed.
	(Is_SPARK_Volatile_Object): Removed.
	* sem_util.ads (Is_Effectively_Volatile): New routine.
	(Is_Effectively_Volatile_Object): New routine.
	(Is_SPARK_Volatile): Removed.
	(Is_SPARK_Volatile_Object): Removed.

2014-07-31  Pascal Obry  <obry@adacore.com>

	* s-fileio.adb (Open): Make sure a shared file gets inserted into
	the global list atomically. This ensures that the file descriptor
	won't be freed because another tasks is closing the file.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb (Process_Range_Expr_In_Decl): Add comments on
	generation of _FIRST and _LAST variables even in GNATprove_Mode.
	* gnat_ugn.texi: Minor editing.
	* sem_prag.adb (Ensure_Aggregate_Form): Make sure generated
	aggregate is marked Comes_From_Source if argument is CFS.

2014-07-31  Pascal Obry  <obry@adacore.com>

	* s-fileio.adb: Remove obsolete comment.

2014-07-31  Vincent Celier  <celier@adacore.com>

	* a-strbou.ads ("=" (Bounded_String, Bounded_String): Add
	overriding keyword before function to avoid error when compiler
	is called with -gnatyO (check overriding indicators).

2014-07-31  Tucker Taft  <taft@adacore.com>

	* gnat_ugn.texi: Add a paragraph pointing the reader
	to the "plugins" example.

2014-07-31  Hristian Kirtchev  <kirtchev@adacore.com>

	* freeze.adb (Freeze_Expression): Document the
	purpose of the parent chain traversal.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* checks.ads, checks.adb (Activate_Overflow_Check): Do not set flag for
	unconstrained fpt ops.

2014-07-31  Pascal Obry  <obry@adacore.com>

	* s-fileio.adb (Open): Make sure a shared file gets inserted into
	the global list atomically. This ensures that the file descriptor
	won't be freed because another tasks is closing the file.

2014-07-31  Vincent Celier  <celier@adacore.com>

	* projects.texi: Minor spelling error fix.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document No_Elaboration_Code_All restriction.
	* lib-writ.adb, lib-load.adb: Initialize No_Elab_Code field in unit
	information.
	* lib.ads, lib.adb (No_Elab_Code): New field in unit information.
	* restrict.adb (Process_Restriction_Synonyms): Add handling
	of No_Elaboration_Code_All.
	* restrict.ads (Process_Restriction_Synonyms): Now handles
	No_Elaboration_Code_All.
	* sem_ch10.adb (Analyze_Context): Enforce transitive with for
	No_Elaboration_Code_All.
	* sem_prag.adb (Process_Restrictions_Or_Restriction_Warnings):
	Handle setting of No_Elab_Code in unit information. Handle
	No_Elaboration_Code_All.
	* snames.ads-tmpl (Name_No_Elaboration_Code): New name for
	pragma processing.
	(Name_No_Elaboration_Code_All): New name for pragma processing.

2014-07-31  Eric Botcazou  <ebotcazou@adacore.com>

	* exp_aggr.adb (Aggr_Assignment_OK_For_Backend): Reject array
	types with a null range and use the Esize of the component
	instead of its RM_Size to identify appropriate values.

2014-07-31  Hristian Kirtchev  <kirtchev@adacore.com>

	* freeze.adb Add with and use clause for Aspects.
	(Freeze_Expression): Emit an error when a volatile constant lacks
	Boolean aspect Import.
	(Has_Boolean_Aspect_Import): New routine.

2014-07-31  Gary Dismukes  <dismukes@adacore.com>

	* exp_util.adb: Minor reformatting.

2014-07-31  Vincent Celier  <celier@adacore.com>

	* errutil.adb (Error_Msg): Make sure that all components of
	the error message object are initialized.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Try_Container_Indexing): If the container type is
	class-wide, use specific type to locate iteration primitives.
	* sem_ch13.adb (Check_Indexing_Functions): Add legality checks for
	rules in RM 4.1.6 (Illegal_Indexing): New diagnostic procedure.
	Minor error message reformating.
	* exp_ch5.adb (Expand_Iterator_Loop): Handle properly Iterator
	aspect for a derived type.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Document debug flag d.X.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.ads (Find_Specific_Type): Moved here from exp_disp.adb.
	* sem_util.adb (Find_Specific_Type): If type is untagged private,
	retrieve full view so that primitive operations can be located.
	* exp_disp.adb Move Find_Specific_Type to sem_util.
	* exp_ch4.adb (Expand_N_Op_Eq): If operands are class-wide, use
	Find_Specific_Type to locate primitive equality.
	* exp_util.adb (Make_CW_Equivalent_Type): A class_wide equivalent
	type does not require initialization.
	* exp_attr.adb (Compile_Stream_Body_In_Scope): Within an instance
	body all visibility is established, and the enclosing package
	declarations must not be installed.

2014-07-31  Yannick Moy  <moy@adacore.com>

	* sem_parg.adb, sem_prag.ads (Collect_Subprogram_Inputs_Outputs):
	Make subprogram public.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch9.adb (Expand_N_Protected_Type_Declaration): New
	predicate Discriminated_Size, to distinguish between private
	components that depend on discriminants from those whose size
	depends on some other non-static expression.

2014-07-31  Nicolas Setton  <setton@adacore.com>

	* g-exptty.adb (Close): Fix binding to Waitpid: use the
	tty version.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Make_Index): Reject properly the use of 'Length
	in a discrete range, when 'range was probably intended.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* sem_warn.adb, sem_warn.ads (Has_Junk_Name): Moved from body to spec.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* frontend.adb: Minor reformatting.
	* sem.adb: Minor reformatting.
	* sem_ch6.adb (Analyze_Null_Procedure): Set proper sloc for
	identifiers on rewrite.
	* par.adb: Minor comment updates.
	* a-ngelfu.adb (Cos): Minor simplification.
	* par-ch13.adb (Get_Aspect_Specifications): Improve messages
	and recovery for bad aspect.
	* exp_ch3.adb: Code clean up.
	* sem_util.ads: Minor comment correction.
	* sem_ch13.adb (Check_Array_Type): Properly handle large types.
	* sem_ch3.adb: Code clean up.
	* binderr.ads: Minor comment correction.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* exp_disp.adb (Expand_Interface_Conversion): A call whose
	prefix is a static conversion to an interface type that is not
	class-wide is not dispatching.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* inline.adb, s-traceb.adb, s-traceb-hpux.adb, memtrack.adb,
	s-traceb-mastop.adb: Minor reformatting.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Expand_Record_Extension): In ASIS_Mode perform
	expansion, to handle properly visibility of selected components
	in instance bodies.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* par-ch13.adb (Get_Aspect_Specifications): Set Inside_Depends.
	* par-ch2.adb (P_Pragma): Set Inside_Depends.
	* par-ch4.adb (P_Simple_Expression): Pass Inside_Depends to
	Check_Unary_Plus_Or_Minus.
	* scans.ads (Inside_Depends): New flag.
	* scng.adb (Scan): Pass Inside_Depends to Check_Arrow.
	* style.ads: Add Inside_Depends parameter to Check_Arrow Add
	Inside_Depends parameter to Check_Unary_Plus_Or_Minus.
	* styleg.adb (Check_Arrow): Handle Inside_Depends case.
	(Check_Unary_Plus_Or_Minus): Handle Inside_Depends case.
	* styleg.ads: Add Inside_Depends parameter to Check_Arrow Add.
	Inside_Depends parameter to Check_Unary_Plus_Or_Minus.

2014-07-31  Javier Miranda  <miranda@adacore.com>

	* s-vaflop.adb Move the body of function T_To_G before
	T_To_D. Required for frontend inlining.
	* inline.adb (Has_Excluded_Contract): New subprogram used to
	check if a subprogram inlined by the frontend has contracts
	which cannot be inlined.

2014-07-31  Bob Duff  <duff@adacore.com>

	* s-traceb.adb, s-traceb-hpux.adb, s-traceb-mastop.adb:
	(Call_Chain): Add 1 to number of frames to skip, to account for
	the fact that there's one more frame on the stack.
	* gcc-interface/Makefile.in (s-traceb.o): Adjust rules.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* checks.adb (Enable_Overflow_Check): More precise setting of
	Do_Overflow_Check flag for division.

2014-07-31  Eric Botcazou  <ebotcazou@adacore.com>

	* exp_aggr.adb (Aggr_Assignment_OK_For_Backend): Reject packed
	array types with implementation type.

2014-07-31  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch10.adb (Process_State): Remove local variable Name. Add
	local variable Decl. Partially declare an abstract state by
	generating an entity and storing it in the state declaration.
	* sem_prag.adb (Create_Abstract_State): Fully declare a
	semi-declared abstract state.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* prj-nmsc.adb: Minor reformatting.

2014-07-31  Bob Duff  <duff@adacore.com>

	* s-tasdeb.adb (System.Tasking.Debug): Remove
	all usage of the secondary stack from this package.

2014-07-31  Hristian Kirtchev  <kirtchev@adacore.com>

	* freeze.adb (Freeze_Expression): Update the loop in charge
	of finding a proper insertion place for freeze nodes to handle
	N_Expression_With_Actions nodes.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb, a-ngelfu.ads, prj-nmsc.adb, prj-conf.adb: Minor
	reformatting.

2014-07-31  Pascal Obry  <obry@adacore.com>

	* prj-nmsc.adb: Minor reformatting.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb (Has_Preelaborable_Initialization): Check that
	type is tagged before checking whether a user-defined Initialize
	procedure is present.

2014-07-31  Gary Dismukes  <dismukes@adacore.com>

	* a-ngelfu.ads (Sqrt): Augment postcondition.

2014-07-31  Pascal Obry  <obry@adacore.com>

	* prj-nmsc.adb (Check_Library_Attributes): An aggegate library
	directory and ALI directory must be different than all object
	and library directories of aggregated projects.

2014-07-31  Vincent Celier  <celier@adacore.com>

	* prj-pars.adb, prj-conf.ads, prj-conf.adb (Locate_Runtime): Move spec
	to package body, as it is not called from outside. Remove argument
	Project_Tree, no longer used. When runtime cannot be found,
	call Raise_Invalid_Config instead of failing the program.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* bindgen.adb (Gen_Output_File_Ada): Generate pragma Suppress
	(Overflow_Check).
	* gnatlink.adb (Process_Args): Remove generation of -gnato0,
	no longer needed.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Document new switch -gnato0.
	* sem_ch3.ads: Minor reformatting.
	* gnatlink.adb (Process_Args): Compile bind file with -gnato0
	(we do not want overflow checks when incrementing elaboration
	counters).
	* einfo.ads: Minor reformatting.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* exp_ch5.adb, freeze.adb, exp_ch3.adb: Minor comment correction.
	* s-arit64.adb: Minor reformatting.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* gnat1drv.adb (Adjust_Global_Switches): Default for overflow
	checking is enabled except in GNAT_Mode.
	* switch-c.adb (Scan_Front_End_Switches): Implement -gnato0
	(suppress overflow checks).

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Expand_Freeze_Record_Type): Do not build an
	invariant procedure for an internally generated subtype that is
	created for an object of a class-wide type.

2014-07-31  Vincent Celier  <celier@adacore.com>

	* prj-nmsc.adb, errutil.adb: Make code similar to Errout.

2014-07-31  Gary Dismukes  <dismukes@adacore.com>

	* gnat_rm.texi, sem_aux.ads, einfo.ads, sem_util.ads, sem_ch6.adb,
	exp_disp.adb: Minor reformatting.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* exp_ch5.adb, sem_ch3.adb, exp_ch7.adb, exp_util.adb, exp_ch9.adb,
	sem_ch7.adb, checks.adb, s-exctra.adb, exp_ch6.adb, exp_disp.adb,
	exp_dist.adb, sem_ch13.adb, exp_strm.adb, exp_ch3.adb: Minor
	reformatting.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb: Minor reformatting.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Build_Invariant_Checks): If the enclosing record
	is an unchecked_union, warn that invariants will not be checked
	on components that have them.

2014-07-31  Robert Dewar  <dewar@adacore.com>

	* freeze.adb (Freeze_Entity): Check for error of
	Type_Invariant'Class applied to a untagged type.
	* sem_ch6.adb (Analyze_Null_Procedure): Unconditionally rewrite
	as null body, so that we perform error checks even if expansion
	is off.

2014-07-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Build_Invariant_Procedure): If body of procedure
	is already present, nothing to do.
	* exp_ch3.adb (Build_Component_Invariant_Call): For an access
	component, check whether the access type has an invariant before
	checking the designated type.
	(Build_Record_Invariant_Proc): Change suffix of generated
	name to prevent ambiguity when record type has invariants
	in addition to those of components, and two subprograms are
	constructed. Consistent with handling of array types.
	(Insert_Component_Invariant_Checks): Build invariant procedure
	body when one has not been created yet, in the case of composite
	types that are completions and whose full declarations carry
	invariants.

2014-07-30  Thomas Quinot  <quinot@adacore.com>

	* gnat_rm.texi: Minor doc fixes.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* a-rbtgbo.adb, sem_ch13.adb: Minor reformatting.

2014-07-30  Vincent Celier  <celier@adacore.com>

	* errutil.adb (Set_Msg_Text): Process tilde ('~'): no processing
	of error message.
	* prj-nmsc.adb (Locate_Directory): Use a tilde ('~') in the
	message to report that a directory cannot be created, to avoid
	processing of the directory path that may contains special
	insertion characters.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* a-crdlli.ads: Place declaration of Empty_List after full type
	declaration for Curosr, to prevent freezing error.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* get_targ.adb: Minor code reorganization.
	* prj-proc.adb, prj-proc.ads, get_targ.ads, sem_ch6.adb: Minor
	reformatting.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* a-cbhase.adb: a-cbhase.adb (Insert): Raise Constraint_Error,
	not Program_Error, when attempting to remove an element not in
	the set. This is the given semantics for all set containers.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* a-rbtgbo.adb (Delete_Node_Sans_Free): If
	element is not present in tree return rather than violating
	an assertion. Constraint_Error will be raised in the caller if
	element is not in the container.

2014-07-30  Arnaud Charlet  <charlet@adacore.com>

	* set_targ.adb (Read_Target_Dependent_Values): New subprogram.
	(elab body): Add provision for default target config file.
	* get_targ.ads, get_targ.adb (Get_Back_End_Config_File): New subprogram.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* a-cbhase.adb (Delete): Raise Constraint_Error, not Program_Error,
	when attempting to remove an element not in the set. This is
	the given semantics for all set containers.
	* a-cborse.adb (Delete): Attempt removal first, to check for
	tampering, before checking whether this is an attempt to
	delete a  non-existing element, and in fthe latter case raise
	Constraint_Error.

2014-07-30  Vincent Celier  <celier@adacore.com>

	* prj-proc.adb (Recursive_Process): Do not create a new
	Project_Id if the project is already in the list of projects of
	the tree.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Function_Return): Reject a return expression
	whose type is an incomplete formal type.
	(Analyze_Return_Type): Reject a return type that is an untagged
	imcomplete formal type.
	(Process_Formals): Reject a formal parameter whose type is an
	untagged formal incomplete type.
	* sem_res.adb (Resolve_Actuals): Reject an actual whose type is
	an untagged formal incomplete type.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Minor spelling correction.
	* makeutl.adb: Minor code reorganization.
	* exp_ch4.adb, exp_aggr.adb, exp_ch3.adb: Minor reformatting.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* einfo.ads (Has_Unchecked_Union): Document that this is used
	to check for illegal Valid_Scalars attribute references.
	* exp_attr.adb (Build_Record_VS_Func): New function
	(Expand_N_Attribute_Reference, case Valid_Scalars): Call this
	function.
	* gnat_rm.texi: Document 'Valid_Scalars cannot be applied to
	Unchecked_Union Add note on 'Valid_Scalars generating a lot
	of code.
	* sem_attr.adb (Analyze_Attribute, case Valid_Scalars): Give
	error on attempt to apply Valid_Scalars to Unchecked_Union type.

2014-07-30  Steve Baird  <baird@adacore.com>

	* exp_ch4.adb (Expand_N_Indexed_Component): Disable optimized handling
	of A(I..J)(K) in CodePeer_Mode.

2014-07-30  Ben Brosgol  <brosgol@adacore.com>

	* gnat_ugn.texi: Fix typo.

2014-07-30  Thomas Quinot  <quinot@adacore.com>

	* lib-writ.ads: document format change.

2014-07-30  Pascal Obry  <obry@adacore.com>

	* prj-util.adb (For_Interface_Sources): Do not
	include sources from withed externally built projects.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* lib.adb: Minor reformatting.
	* prj-util.adb: Minor reformatting.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* exp_aggr.adb (Build_Record_Aggr_Code): For an array component
	that depends on discriminants, and which is given by an others
	clause, create an explicit subtype with the discriminant values
	of the enclosing aggregate, because the backend cannot otherwise
	retrieve the actual bounds of the array.

2014-07-30  Fedor Rybin  <frybin@adacore.com>

	* gnat_ugn.texi: Improve gnattest documentation.

2014-07-30  Pascal Obry  <obry@adacore.com>

	* makeutl.adb (Insert_Project_Sources): Properly handle sources
	that are aggregated. We want to include sources not only part
	of libraries but also if part of an aggregated project from an
	aggregate library.
	* prj.adb (For_Project_And_Aggregated_Context): Properly check
	state of root project.

2014-07-30  Thomas Quinot  <quinot@adacore.com>

	* lib-load.ads: Minor reformatting.
	* sinfo.ads (Library_Unit): Update comment.
	* lib.ads (Notes): Simplify. The Unit component in Notes_Entry
	is redundant. Instead used the pragma Node_Id directly as the
	element type.

2014-07-30  Thomas Quinot  <quinot@adacore.com>

	* lib.adb (Store_Note): Store only notes that do not come from
	an instance, and that are in the extended main source unit.
	* lib-writ (Write_Unit_Information): Annotations from subunits
	must be emitted along with those for the main unit, and they
	must carry a specific file name.
	* ali.ads (Notes_Record): Use a File_Name_Type instead of a
	Unit_Id for the source file containing the pragma, as in the
	case of annotations from subunits we might not have a readily
	available unit id.
	* ali.adb (Scan_ALI): Account for above change in data structure.

2014-07-30  Vincent Celier  <celier@adacore.com>

	* makeutl.adb (Insert_Project_Sources): When the library project
	is an aggregate Stand-Alone Library, insert in the queue the
	Ada interface units, with Closure set to True;

2014-07-30  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_util.adb: Fix minor typo.
	* makeutl.adb: Minor reformatting.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* exp_ch7.adb, checks.adb, makeutl.adb, makeutl.ads: Minor reformatting.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* checks.ads: Fix typo in comment.

2014-07-30  Pierre-Marie Derodat  <derodat@adacore.com>

	* sem_util.adb (Set_Debug_Info_Needed): For scalar types, recurse on
	entities that materialize range bounds, if any.

2014-07-30  Vincent Celier  <celier@adacore.com>

	* projects.texi: Minor spelling fix.

2014-07-30  Hristian Kirtchev  <kirtchev@adacore.com>

	* checks.adb (Make_Bignum_Block): Use the new secondary stack
	build routines to manage the mark.
	* exp_ch7.adb (Create_Finalizer, Expand_Cleanup_Actions):
	Use the new secodary stack build routines to manage the mark.
	(Insert_Actions_In_Scope_Around): Add new formal parameter
	Manage_SS along with comment on its usage. Code and comment
	reformatting. Mark and release the secondary stack when the
	context warrants it.
	(Make_Transient_Block): Update the call
	to Insert_Actions_In_Scope_Around to account for parameter Manage_SS.
	(Wrap_Transient_Declaration): Remove local variable
	Uses_SS. Ensure that the secondary stack is marked and released
	when the related object declaration appears in a library level
	package or package body. Code and comment reformatting.
	* exp_util.ads, exp_util.adb (Build_SS_Mark_Call): New routine.
	(Build_SS_Release_Call): New routine.

2014-07-30  Steve Baird  <baird@adacore.com>

	* exp_attr.adb: Revert previous change, not needed after all.

2014-07-30  Vincent Celier  <celier@adacore.com>

	* makeutl.adb (Queue.Insert_Project_Sources): Insert with
	Closure => True for interfaces of Stand-Alone Libraries.
	* makeutl.ads (Source_Info (Format => Gprbuild)): Add new
	Boolean component Closure, defaulted to False.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* sem_res.adb: Fix typo in error message.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb (Process_Range_Expr_In_Decl): Use _FIRST/_LAST
	as name suffixes rather than L/H for subtype bounds.
	* tbuild.ads: Minor comment improvements and fixes
	(Make_External_Name): Document that suffix can start with an
	underscore.

2014-07-30  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Document --rep-clauses switch.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): Default_Value and
	Default_Component_Value can only be specified for scalar type or
	arrays of scalar types respectively.  This legality check must
	be performed at the point the aspect is analyzed, in order to
	reject aspect specifications that apply to a partial view.

2014-07-30  Thomas Quinot  <quinot@adacore.com>

	* freeze.adb: Minor reformatting.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb (Expand_Attribute, case First/Last): Don't expand in
	codepeer mode.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* freeze.adb (Check_Expression_Function): At the freeze point
	of an expression function, verify that the expression in the
	function does not contain references to any deferred constants
	that have no completion yet.
	(Freeze_Expression, Freeze_Before): call
	Check_Expression_Function.
	* a-ciorse.ads: Add Reference_Control_Type to detect tampering.
	* a-ciorse.adb: Add Adjust and Finalize routines for
	Reference_Control_Type. Use it in the construction of Reference
	and Constant_Reference values.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* exp_aggr.adb: Update comments.
	* a-chtgbo.adb, a-chtgbo.ads, a-cbhase.adb, a-cbhase.ads: Minor
	reformatting.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* cstand.adb (New_Standard_Entity): New version takes name
	string to call Make_Name.
	(Create_Standard): Use this routine to set name before setting other
	fields.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb (Expand_Attribute, case First): Rewrite simple
	entity reference.
	(Expand_Attribute, case Last): Ditto.
	* exp_ch3.adb (Constrain_Index): New calling sequence for
	Process_Range_Expr_In_Decl.
	(Expand_N_Object_Declaration): Avoid setting Is_Known_Valid in one
	problematical case.
	* sem_ch3.adb (Constrain_Index): New calling sequence for
	Process_Range_Expr_In_Decl.
	(Set_Scalar_Range_For_Subtype): ditto.
	(Process_Range_Expr_In_Decl): Create constants to hold bounds for
	subtype.
	* sem_ch3.ads (Process_Range_Expr_In_Decl): Add Subtyp parameter.
	* sem_eval.adb (Compile_Time_Compare): Make sure we use base
	types if we are not assuming no invalid values.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* clean.adb: Minor reformatting.
	* opt.ads: Minor fix to incorrect comment.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* a-chtgbo.ads, a-chtgbo.adb (Delete_Node_At_Index): New
	subprogram, used by bounded hashed sets, to delete a node at
	a given index, whose element may have been improperly updated
	through a Reference_Preserving key.
	* a-cbhase.ads: Add Reference_Control_Type to package Generic_Keys.
	* a-cbhase.adb: Add Adjust and Finalize routines for
	Reference_Control_Type.
	(Delete, Insert): Raise Program_Error, not Constraint_Error,
	when operation is illegal.
	(Reference_Preserving_Key): Build aggregate for Reference_Control_Type
	* a-cmbutr.ads: Add Reference_Control_Type to detect tampering. Add
	private with_clause for Ada.Finalization.
	* a-cbmutr.adb: Add Adjust and Finalize routines for
	Reference_Control_Type. Use it in the construction of Reference
	and Constant_Reference values.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, sem_ch3.ads: Minor code reorganization.

2014-07-30  Pascal Obry  <obry@adacore.com>

	* clean.adb (Clean_Project): Properly check for directory
	existence before trying to enter it.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.ads, prj.ads, prj-nmsc.adb: Minor reformatting.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* par-ch5.adb (P_Sequence_Of_Statements): Properly handle
	missing semicolon after name.

2014-07-30  Pascal Obry  <obry@adacore.com>

	* prj.ads (Gprinstall_Flags): New constant.
	* prj-nmsc.adb (Check_Library_Attributes): Do not fails for
	missing library dir if Directories_Must_Exist_In_Projects
	is false.

2014-07-30  Bob Duff  <duff@adacore.com>

	* a-except-2005.adb, a-except.adb: Remove obsolete comments.
	* s-traceb.ads: Updagte comments.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* checks.adb, a-cihase.adb, a-cihase.ads, a-chtgop.adb, a-chtgop.ads,
	a-except.adb, a-except-2005.adb, a-cborse.adb, a-cborse.ads,
	a-exexda.adb, a-elchha.adb, exp_aggr.adb, a-cohase.adb: Minor
	reformatting.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* a-chtgop.ads, a-chtgop.adb (Delete_Node_At_Index): New
	subprogram, used by all versions of hashed sets, to delete a node
	whose element has been improperly updated through a Reference_
	Preserving key.
	* a-cohase.adb: Remove Delete_Node, use new common procedure
	Delete_Node_At_Index.
	* a-cihase.ads: Add Reference_Control_Type to package Generic_Keys.
	* a-cihase.adb: Add Adjust and Finalize routines for
	Reference_Control_Type.
	(Reference_Preserving_Key): Build aggregate for
	Reference_Control_Type

2014-07-30  Yannick Moy  <moy@adacore.com>

	* checks.adb, checks.ads (Determine_Range_R): New procedure to
	determine the possible range of a floating-point expression.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* a-cborse.ads: Add Reference_Control_Type to package Generic_Keys.
	* a-cborse.adb: Add Adjust and Finalize routines for
	Reference_Control_Type.
	(Reference_Preserving_Key): Build aggregate for
	Reference_Control_Type.
	(Delete): Check for tampering, and raise Program_Error (not
	Constraint_Error) when attempting to delete an element not in
	the set.
	(Insert): Ditto.

2014-07-30  Bob Duff  <duff@adacore.com>

	* a-elchha.adb, a-except-2005.adb, a-except.adb, a-exexda.adb,
	* a-exextr.adb, a-exstat.adb, exp_intr.ads, s-tassta.adb:
	Exception_Information is used to produce useful debugging
	information for the programmer. However, it was also used to
	implement the stream attributes for type Exception_Occurrence. The
	latter requires a stable and portable interface, which meant
	that we couldn't include a symbolic traceback. A separate set of
	routines was used to provide symbolic tracebacks under program
	control (i.e. not automatically). The goal of this ticket is
	to provide such automatic tracebacks, so the change here is to
	split the two functionalities: Exception_Information gives the
	maximally useful information for debugging (i.e. it now includes
	a symbolic traceback when a decorator is set, and it can be
	improved freely in the future without disturbing streaming).
	Untailored_Exception_Information always uses hexadecimal addresses
	in the traceback, has a stable and portable output, and is now
	used for streaming.

2014-07-30  Eric Botcazou  <ebotcazou@adacore.com>

	* exp_aggr.adb (Expand_Array_Aggregate): Add missing test
	on the target of the assignment to find out whether it
	can be directly done by the back-end.
	* exp_util.adb (Is_Possibly_Unaligned_Slice): Remove obscure test.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* inline.adb, a-coorse.adb, a-coorse.ads, a-cohase.adb, a-cohase.ads,
	a-tasatt.adb: Minor reformatting.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb: Minor reformatting.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* a-coorse.adb, a-coorse.ads (Generic_Keys): Add a
	Reference_Control_Type to generic package, to keep additional
	information for Reference_Types that manipulate keys. Add Adjust and
	Finalize procedures for this type.
	(Finalize): When finalizing a reference_preserving_key, verify
	that the key of the new value is equivalent to the key of the
	original element, raise Program_Error otherwise.
	(Insert): Detect tampering.
	(Reference_Preserving_Key): Build proper Reference_Control_Type,
	and update Busy and Lock bits to detect tampering.
	* a-cohase.ads: Keep with-clause private.

2014-07-30  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Expand_N_Op_Eq): Emit a warning when the operands
	of an equality are of an Unchecked_Union type and lack inferable
	discriminants.

2014-07-30  Bob Duff  <duff@adacore.com>

	* g-exctra.adb, g-exctra.ads, s-exctra.adb, s-exctra.ads, Makefile.rtl,
	g-trasym.adb, g-trasym.ads, s-trasym.adb, s-trasym.ads: Move
	GNAT.Traceback.Symbolic and GNAT.Exception_Traces into the System
	hierarchy (System.Traceback.Symbolic and System.Exception_Traces), so
	we can call them from the runtimes. Leave renamings in place under GNAT.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* inline.adb (Check_And_Build_Body_To_Inline): Include code for
	inlining in GNATprove mode.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* a-cohase.adb, a-cohase.ads (Generic_Keys): Add a
	Reference_Control_Type to generic package, to keep additional
	information for Reference_Types that manipulate keys. Add Adjust and
	Finalize procedures for this type.
	(Delete_Node): New procedure called when finalizing a
	Reference_Control_Type, to remove a node whose element has been
	improperly updated through a Reference.
	(Insert): Detect tampering.
	(Reference_Preserving_Key): Build proper Reference_Control_Type,
	and update Busy and Lock bits to detect tampering.

2014-07-30  Bob Duff  <duff@adacore.com>

	* exp_intr.ads: Minor comment fix.

2014-07-30  Gary Dismukes  <dismukes@adacore.com>

	* exp_prag.adb, a-tags.ads: Minor typo fixes.

2014-07-30  Bob Duff  <duff@adacore.com>

	* a-excach.adb, a-excach-cert.adb, a-except-2005.ads,
	a-except.ads, g-traceb.adb, memtrack.adb,
	s-traceb.adb, s-traceb.ads, s-traceb-hpux.adb, s-traceb-mastop.adb:
	Cleanup: Make the three versions of System.Traceback.Call_Chain
	have the same interface. Use an array for the Traceback parameter
	instead of an Address.	This will enable reduction in code
	duplication.

2014-07-30  Pat Rogers  <rogers@adacore.com>

	* gnat_ugn.texi: Corrected minor textual error in description
	of switch -gnatwl.

2014-07-30  Bob Duff  <duff@adacore.com>

	* Makefile.rtl: Sort file names.

2014-07-30  Arnaud Charlet  <charlet@adacore.com>

	* a-tasatt.adb: Complete previous change: kill spurious warning
	on e.g. sparc, and make sure we only use the fast path when the
	alignment is compatible.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Mark new Spec_Id as
	coming from source.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* inline.adb (Build_Body_To_Inline): Issue more precise messages
	for declarations that prevent inlining.
	(Cannot_Inline): Change usual start of message to refer to contextual
	analysis in GNATprove mode.
	* sem_res.adb (Resolve_Call): Change usual start of message to
	refer to contextual analysis in GNATprove mode, when inlining
	not possible.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* sem_res.adb, sem_ch6.adb: Minor code reorganization.
	* inline.adb: Minor reformatting.

2014-07-30  Javier Miranda  <miranda@adacore.com>

	* a-tags.ads: Add comments.

2014-07-30  Pat Rogers  <rogers@adacore.com>

	* gnat_rm.texi: Minor word error.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* exp_prag.adb (Expand_Old): Insert declarationss of temporaries
	created to capture the value of the prefix of 'Old at the
	beginning of the current declarative part, to prevent data flow
	anomalies in the postcondition procedure that will follow.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* debug.adb: Retire debug flag -gnatdQ.
	* inline.adb (Can_Be_Inlined_In_GNATprove_Mode): Check SPARK_Mode
	on decl, not on body.  Ignore predicate functions.
	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Remove use of
	debug flag -gnatdQ.  Correctly analyze SPARK_Mode on decl and
	body when generating a decl for a body on which SPARK_Mode aspect
	is given.
	* sem_prag.adb (Analyze_Pragma|SPARK_Mode): Reorder tests for
	attaching pragma to entity, to account for declaration not coming
	from source.
	* sem_res.adb (Resolve_Call): Issue warning and flag subprogram
	as not always inlined in GNATprove mode, when called in an
	assertion context.

2014-07-30  Vincent Celier  <celier@adacore.com>

	* debug.adb: Minor comment update.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* s-tasuti.adb, s-tassta.adb: Minor reformatting.
	* sprint.adb (Sprint_Node): Handle N_Contract case.
	* exp_prag.adb: Minor reformatting.
	* freeze.adb (Freeze_Entity): Check useless postcondition for
	No_Return subprogram.
	* sem_prag.adb: Minor reformatting.

2014-07-30  Javier Miranda  <miranda@adacore.com>

	* a-tags.ads: Complete comments about performance.

2014-07-30  Fedor Rybin  <frybin@adacore.com>

	* gnat_ugn.texi: Adding description for --exit-status option to
	gnattest section.  Fixing index entry of --passed-tests option
	in gnattest section.

2014-07-30  Javier Miranda  <miranda@adacore.com>

	* Makefile.rtl, gnat_rm.texi, i-cpp.adb, i-cpp.ads, impunit.adb,
	rtsfind.ads: Remove references to package Interfaces.CPP since this
	package is no longer needed.

2014-07-30  Bob Duff  <duff@adacore.com>

	* s-taasde.adb (Timer_Queue): Don't use a
	build-in-place function call to initialize the Timer_Queue.
	* s-traent.adb, s-traent.ads, s-traent-vms.adb, s-traent-vms.ads:
	Turn off polling in these units, because otherwise we get
	elaboration circularities with Ada.Exceptions when the -gnatP
	switch is used.
	* s-tassta.adb (Create_Task): Make sure independent tasks
	are created with Parent = Environment_Task. This was not true,
	for example, in s-interr.adb, when Interrupt_Manager does "new
	Server_Task"; the Server_Task had Parent = Interrupt_Manager,
	which is wrong because the master is determined by the access
	type, which is at library level.
	* s-tasuti.adb (Make_Independent): Avoid setting Parent; it is
	now set correctly by Create_Task.
	(Make_Passive): Remove the workaround for the race condition in
	Make_Independent.
	* frontend.adb (Frontend): Revert to previous method of detecting
	temporary configuration pragma files, recognizing such files by
	".tmp" in the name. This is more general than detecting pragmas
	Source_File_Name_Project, because it allows any tool to use
	this naming convention, no matter the content of the file.
	* gnat_ugn.texi: Document this naming convention.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* exp_ch7.adb, s-tataat.adb, s-tataat.ads, s-parame-vms-alpha.ads,
	inline.adb, s-parame-hpux.ads, exp_smem.adb, s-tasini.adb,
	s-tasini.ads, s-parame-vms-ia64.ads, s-parame.ads, s-taskin.ads,
	s-parame-vxworks.ads, a-tasatt.adb, a-tasatt.ads: Minor reformatting.
	* a-suenco.adb (Convert): Handle overlong encodings in UTF8-UTF8
	conversion.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb: Improve error recovery.
	* inline.adb (Build_Body_To_Inline): Set Full_Analysis to false
	before analyzing the body, so that in GNATprove mode there is
	no light expansion. Whatever expansion is required by SPARK will
	be performed when analysing the inlined code.

2014-07-30  Bob Duff  <duff@adacore.com>

	* s-tataat.adb, s-tataat.ads, a-tasatt.adb: Minor comment fixes.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Loop_Statement): If loop has a label,
	verify that it is not hidden by an inner implicit declaration.

2014-07-30  Thomas Quinot  <quinot@adacore.com>

	* sem.ads (Scope_Table_Entry): New component Locked_Shared_Objects.
	* sem_ch8.adb (Push_Scope): Initialize Locked_Shared_Objects.
	* exp_smem.adb (Add_Shared_Var_Lock_Procs): Handle the case where
	the call returns an unconstrained type: in this case there is
	already a transient scope, and we should not establish a new one.
	* exp_ch7.adb (Insert_Actions_In_Scope_Around): New formal Clean. If
	True, also insert cleanup actions in the tree.
	(Wrap_Transient_Declaration): Call Insert_Actions_In_Scope_Around
	with Clean set True.

2014-07-30  Arnaud Charlet  <charlet@adacore.com>

	* s-taskin.ads (Direct_Index, Direct_Index_Range,
	Direct_Attribute_Element, Direct_Attribute_Array,
	Direct_Index_Vector, Direct_Attributes, Is_Defined,
	Indirect_Attributes): Removed.	(Atomic_Address,
	Attribute_Array, Attributes): New.
	* s-tasini.ads, s-tasini.adb (Proc_T, Initialize_Attributes,
	Finalize_Attributes_Link, Initialize_Attributes_Link): Removed.
	(Finalize_Attributes): Reimplement.
	* s-tassta.adb (Create_Task): Remove call to
	Initialize_Attributes_Link (Free_Task, Vulnerable_Free_Task):
	Replace Finalize_Attributes_Link by Finalize_Attributes.
	* a-tasatt.ads, a-tasatt.adb, s-tataat.ads, s-tataat.adb:
	Reimplement from scratch, using a simpler and more efficient
	implementation.
	* s-tporft.adb (Register_Foreign_Thread): Remove now obsolete comment.
	* s-parame.ads, s-parame-hpux.ads,
	* s-parame-vms-alpha.ads, s-parame-vms-ia64.ads,
	* s-parame-vxworks.ads (Max_Attribute_Count): New, replace
	Default_Attribute_Count.

2014-07-30  Olivier Hainque  <hainque@adacore.com>

	* vxworks-ppc-link.spec: New file. Extra link
	instructions for ppc-vxworks.
	* vxworks-crtbe-link.spec: Likewise, for ZCX related support.
	* system-vxworks-ppc.ads: Adjust linker options to use spec files.
	* system-vxworks-arm.ads: Likewise.
	* gcc-interface/Makefile.in: Enable .spec files.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_aggr.adb: Minor comment reformatting.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* sem_util.ads, sem_util.adb (Is_Junk_Name): Removed.
	* sem_warn.adb (Has_Junk_Name): New function
	(Check_References): Use Has_Junk_Name to delete junk warnings
	(Check_Unset_Reference): ditto.
	(Warn_On_Unreferenced_Entity): ditto.
	(Warn_On_Useless_Assignment): ditto.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* checks.adb (Insert_Valid_Check): Do not check for the packed
	array type of a prefix that is an access type.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Eval_Attribute): Evaluate the GNAT attribute
	Unconstrained_Array even if prefix is not frozen yet, as can
	occur with a private subtype used as a generic actual.

2014-07-30  Gary Dismukes  <dismukes@adacore.com>

	* sem_attr.adb: Minor reformatting.

2014-07-30  Pat Rogers  <rogers@adacore.com>

	* gnat_rm.texi: Corrected minor wording error in description
	of No_Exception_Registration.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* einfo.ads, einfo.adb: New flag Is_Inlined_Always for use in GNATprove
	mode. Realphabetize two subprograms.
	* inline.adb (Cannot_Inline): Use Is_Inlined_Always in GNATprove mode.
	(Can_Be_Inlined_In_GNATprove_Mode): Adapt to possible Empty Body_Id.
	(Check_And_Build_Body_To_Inline): Use Is_Inlined_Always in GNATprove
	mode.
	(Expand_Inline_Call): Use Is_Inlined_Always in GNATprove mode.
	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Do not use
	Is_Inline in GNATprove mode.
	(Analyze_Subprogram_Specification):
	Set Is_Inlined_Always at subprogram entity creation.
	* sem_res.adb (Resolve_Call): Do not deal with inlining during
	pre-analysis.  Issue warning on call to possibly inlined
	subprogram when body not seen.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* lib-xref.adb (Generate_Reference): Add special
	case for compiler-generated formals in GNATprove mode.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* sem_ch6.adb: Add comments.

2014-07-30  Thomas Quinot  <quinot@adacore.com>

	* s-os_lib.ads (GM_Time_Of): Clarify documentation.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* sem_aggr.adb, sem_res.adb: Minor reformatting.

2014-07-30  Thomas Quinot  <quinot@adacore.com>

	* sem_ch13.adb (Analyze_Attribute_Definition_Clause, case
	Bit_Order): Set Reverse_Bit_Order on the base type of the
	specified first subtype.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* inline.adb (Expand_Inlined_Call): Use a renaming declaration
	to capture the value of actuals of a limited type rather than
	an object declaration, to prevent spurious errors when analyzing
	the inlined body.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Analyze_Type_Conversion): Treat an inlined body
	as an instance, and inhibit semantic checks on already analyzed
	code to prevent spurious errors.

2014-07-30  Arnaud Charlet  <charlet@adacore.com>

	* a-exctra.ads ("="): New function, to restore compatibility.

2014-07-30  Pascal Obry  <obry@adacore.com>

	* adaint.c (__gnat_to_os_time): Set isdst to -1 for the mktime
	routine to use the OS dst setting.

2014-07-30  Pat Rogers  <rogers@adacore.com>

	* gnat_ugn.texi: Minor correction to description of -gnatw.K.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb (Wrong_Type): Disable some checks equally within
	instances and within inlined bodies, to suppress spurious type
	errors on already analyzed code.
	* sem_aggr.adb (Check_Expr_OK_In_Limited_Aggregate): Expression
	is legal in an inlined body, juts as it is in an instance body.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Resolve_Unchecked_Conversion): Within an inlined
	body the operand of an unchecked conversion may be a literal, in
	which case its type is the target type of the conversion. This
	is in contrast to conversions in other contexts, where the
	operand cannot be a literal and must be resolvable independent
	of the context.

2014-07-30  Pierre-Marie Derodat  <derodat@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <object>: Create a
	mere scalar constant instead of a reference for a renaming of
	scalar literal.
	* gcc-interface/utils.c (renaming_from_generic_instantiation_p): New.
	* gcc-interface/gigi.h (renaming_from_generic_instantiation_p): New.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* s-tasuti.adb, s-tasuti.ads, einfo.ads, sem_prag.adb, s-taasde.adb,
	g-socthi-vms.adb, s-taprop-mingw.adb, s-interr.adb, s-interr-hwint.adb,
	g-decstr.adb, s-tasdeb-vms.adb, g-expect-vms.adb, makeutl.adb,
	s-interr-vms.adb, g-socthi.adb, exp_aggr.adb, s-tasdeb.adb,
	g-awk.adb, gnatls.adb, s-taspri-posix.ads, g-catiio.adb,
	s-interr-sigaction.adb, s-os_lib.adb, s-fileio.adb: Minor reformatting
	& code reorganization.

2014-07-30  Bob Duff  <duff@adacore.com>

	* s-tassta.adb, sem_util.ads: Minor reformatting.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* inline.adb (Build_Body_To_Inline): Detect when
	subprogram has multiple returns, or not a single last return
	statement, in GNATprove mode.
	(Cannot_Inline): Simplify logic to handle case of GNATprove
	inlining first.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb: Stubs are not subject to inlining.

2014-07-30  Bob Duff  <duff@adacore.com>

	* s-tasuti.ads, s-tasuti.adb (Make_Independent): Change this
	from a procedure to a function, so that it can more easily be
	called before the "begin" of a task.
	* s-taasde.ads (Delay_Block): Make this type immutably limited,
	so we can use a build-in-place function call to initialize
	Timer_Queue in the body.
	* a-rttiev.adb, s-asthan-vms-alpha.adb, s-asthan-vms-ia64.adb,
	* s-interr.adb, s-interr-hwint.adb, s-interr-sigaction.adb,
	* s-interr-vms.adb, s-taasde.adb: Each independent task now calls
	Make_Independent before reaching its "begin", to avoid race
	conditions. This causes the activating task to wait until after
	Make_Independent is complete before proceeding.  In addition,
	we initialize data structures used by independent tasks before
	activating those tasks, to avoid possible use of uninitialized data.
	* s-interr.ads, s-intman.ads, s-taspri-posix.ads, s-tasdeb.ads:
	Minor comment fixes.

2014-07-30  Bob Duff  <duff@adacore.com>

	* a-exctra.ads, s-traent-vms.ads, s-traent.ads (Tracebacks_Array): Move
	the declaration of Tracebacks_Array from Ada.Exceptions.Traceback to
	System.Traceback_Entries (s-traent.ads and s-traent-vms.ads).  Add
	subtypes renaming Tracebacks_Array in Ada.Exceptions.Traceback.
	* g-debpoo.adb: Refer to Tracebacks_Array in its new home.

2014-07-30  Arnaud Charlet  <charlet@adacore.com>

	* a-tasatt.adb: Remove old comments.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* einfo.ads (Is_Inlined): Document new use in GNATprove mode.
	* inline.adb (Can_Be_Inlined_In_GNATprove_Mode): Add comments
	to explain rationale for inlining or not in GNATprove mode.
	(Expand_Inlined_Call): In GNATprove mode, set Is_Inlined flag
	to False when inlining is not possible.
	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Set Is_Inlined
	flag to indicate that subprogram is fully inlined. To be reversed
	if inlining problem is found.
	* sem_res.adb (Resolve_Call): Set Is_Inlined flag to False when
	call in potentially unevaluated context.

2014-07-30  Jose Ruiz  <ruiz@adacore.com>

	* s-tarest.adb, s-tarest.ads: Fix comments.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb, checks.adb, sem_util.adb, sem_util.ads, sem_attr.adb:
	Change No_Scalar_Parts predicate to Scalar_Part_Present and
	invert sense of test. This avoids the "not No_xxx" situation
	which is always ugly.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* inline.adb (Expand_Inlined_Call): When generating code for
	an internal subprogram the expansion uses the location of the
	call, so that gdb can skip over it. In GNATprove mode we want to
	preserve slocs of original subprogram when expanding an inlined
	call, to obtain better warnings, even though subprogram appears
	not to come from source if it is the inlining of a subprogram
	body without a previous spec.

2014-07-30  Eric Botcazou  <ebotcazou@adacore.com>

	* exp_aggr.adb (Aggr_Assignment_OK_For_Backend): Reject array
	types with atomic components.

2014-07-30  Thomas Quinot  <quinot@adacore.com>

	* Make-generated.in: Remove now unnecessary targets after s-oscons
	reorg.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* sem_res.adb (Resolve_Call): Use ultimate alias
	of callee when available.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Expression_Function): To check whether
	an expression function is a completion, use the specification of
	the previous declaration, not its entity, which may be internally
	generated in an inlined context.

2014-07-30  Doug Rupp  <rupp@adacore.com>

	* adaint.c (__gnat_tmp_name) [__ANDROID__]: Default to putting
	temp files in /cache directory unless overridden by TMPDIR.

2014-07-30  Jose Ruiz  <ruiz@adacore.com>

	* s-tassta.adb, s-tarest.adb (Initialize, Create_Task,
	Create_Restricted_Task): Remove redundant check. Number_Of_CPUs returns
	type CPU, so it can never be greater than CPU_Range'Last.

2014-07-30  Bob Duff  <duff@adacore.com>

	* s-taskin.ads: Minor comment fix.

2014-07-30  Thomas Quinot  <quinot@adacore.com>

	* g-socket.adb: Remove now useless WITH, USE, and USE TYPE
	clauses.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* debug.adb: Free debug flag dQ used for frontend inlining in
	GNATprove mode..
	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Remove test of
	debug flag..

2014-07-30  Thomas Quinot  <quinot@adacore.com>

	* Make-generated.in: Remove generation of s-oscons.ads, only
	generate the xoscons utility, in runtime-agnostic rules.
	* gcc-interface/Makefile.in: Clean up rules. Remove VMS parts,
	no longer supported.

2014-07-30  Bob Duff  <duff@adacore.com>

	* exp_ch6.adb (Add_Task_Actuals_To_Build_In_Place_Call): New
	parameter Chain to be used in the allocator case.
	(Make_Build_In_Place_Call_In_Allocator): If the allocated object
	has tasks, wrap the code in a block that will activate them,
	including the usual finalization code to kill them off in case
	of exception or abort.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* treepr.adb, treepr.ads; Reorganize documentation for new pp routines
	Remove renamings (don't work for gdb).
	(par): New synonym for p (avoid gdb ambiguities).
	* inline.adb, sem_ch6.adb, sem_ch13.adb: Minor reformatting.

2014-07-30  Bob Duff  <duff@adacore.com>

	* exp_ch9.ads, sem_prag.adb, exp_ch4.adb, sem_ch13.adb: Minor comment
	fixes.
	* treepr.ads, treepr.adb (ppp): Make this debugging routine
	accept any type covered by Union_Id.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* sem_ch4.adb (Analyze_If_Expression): Resolve condition before
	analyzing branches.
	* sem_eval.adb (Out_Of_Range): Check for statically unevaluated
	expression case.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb (Analyze_Aspect, predicate cases): Diagnose use
	of predicate aspect on entity other than a type.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Body_Has_Contract): New predicate to determine
	when a subprogram body without a previous spec cannot be inlined
	in GNATprove mode, because it includes aspects or pragmas that
	generate a SPARK contract clause.
	* inline.adb (Can_Be_Inlined_In_GNATprove_Mode): A subprogram
	instance cannot be inlined.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Document that d7 suppresses compilation time output.
	* errout.adb (Write_Header): Include compilation time in
	header output.
	* exp_intr.adb (Expand_Intrinsic_Call): Add
	Compilation_Date/Compilation_Time (Expand_Source_Info): Expand
	Compilation_Date/Compilation_Time.
	* g-souinf.ads (Compilation_Date): New function
	(Compilation_Time): New function.
	* gnat1drv.adb (Gnat1drv): Set Opt.Compilation_Time.
	* gnat_rm.texi (Compilation_Date): New function
	(Compilation_Time): New function.
	* opt.ads (Compilation_Time): New variable.
	* s-os_lib.ads, s-os_lib.adb (Current_Time_String): New function.
	* sem_intr.adb (Compilation_Date): New function.
	(Compilation_Time): New function.
	* snames.ads-tmpl (Name_Compilation_Date): New entry.
	(Name_Compilation_Time): New entry.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* inline.adb: Add comment.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* par-ch4.adb (Is_Parameterless_Attribute): 'Result is a
	parameterless attribute, and a postondition can mention an
	indexed component or a slice whose prefix is an attribute
	reference F'Result.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* sprint.adb (Sprint_Node_Actual, case Object_Declaration):
	Avoid bomb when printing package Standard.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_elab.adb (Check_Internal_Call_Continue): If an elaboration
	entity is created at this point, ensure that the name of the
	flag is unique, because the subprogram may be overloaded and
	other homonyms may also have elaboration flags created on the fly.

2014-07-30  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_attr.adb (Analyze_Array_Component_Update): New routine.
	(Analyze_Attribute): Major cleanup of attribute
	'Update. The logic is now split into two distinct routines
	depending on the type of the prefix. The use of <> is now illegal
	in attribute 'Update.
	(Analyze_Record_Component_Update): New routine.
	(Check_Component_Reference): Removed.
	(Resolve_Attribute): Remove the return statement and ??? comment
	following the processing for attribute 'Update. As a result,
	the attribute now freezes its prefix.

2014-07-30  Javier Miranda  <miranda@adacore.com>

	* exp_ch4.adb (Apply_Accessibility_Check): Do
	not call Base_Address() in VM targets.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* gnat1drv.adb (Adjust_Global_Switches): Set
	Ineffective_Inline_Warnings to True in GNATprove mode.
	* inline.adb (Cannot_Inline): Prepare new semantics for GNATprove
	mode of inlining.
	* opt.ads (Ineffective_Inline_Warnings): Add comment that
	describes use in GNATprove mode.
	* sem_prag.adb (Analyze_Pragma|SPARK_Mode): Ignore
	pragma when applied to the special body created for inlining.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* inline.adb, exp_ch4.adb, sinput.adb, sem_ch6.adb, sem_ch13.adb:
	Minor reformatting.

2014-07-30  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.ads Add a comment explaining why SPARK 2014 aspects are
	not delayed. Update the delay status of most SPARK 2014 aspects.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Update all calls
	to Decorate_Aspect_And_Pragma and Insert_Delayed_Pragma to refert
	to Decorate and Insert_Pragma. Add various comments concerning
	the delay status of several SPARK 2014 aspects. The insertion
	of Refined_State now uses routine Insert_After_SPARK_Mode.
	(Decorate): New routine.
	(Decorate_Aspect_And_Pragma): Removed.
	(Insert_Delayed_Pragma): Removed.
	(Insert_Pragma): New routine.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* inline.adb (Expand_Inlined_Call): In GNATprove mode, emit
	only a warning, not an error on an attempt to inline a recursive
	subprogram.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* g-forstr.adb: Minor code reorganization (use J rather than I
	as a variable name).
	* gnat_rm.texi, sem_prag.adb, sem_util.adb, sem_ch13.adb,
	g-forstr.ads: Minor reformatting.

2014-07-30  Eric Botcazou  <ebotcazou@adacore.com>

	* sprint.adb (Set_Debug_Sloc): Also reset the end location if
	we are debugging the generated code.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* sinput.ads, sinput.adb (Comes_From_Inlined_Body): New function that
	returns True for source pointer for an inlined body.

2014-07-30  Javier Miranda  <miranda@adacore.com>

	* exp_ch4.adb (Apply_Accessibility_Check): Add
	missing calls to Base_Address().

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Hanalyze_Subprogram_Body_Helper): In GNATprove
	mode, subprogram bodies without a previous declaration are also
	candidates for front-end inlining.

2014-07-30  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.ads Aspects Async_Readers, Async_Writers,
	Effective_Reads and Effective_Writes do not need to be delayed.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Propagate the
	optional Boolean expression when generating the corresponding
	pragma for an external property aspect.
	* sem_prag.adb (Analyze_External_Property_In_Decl_Part): Remove
	local constant Obj. Add local constant Obj_Id. Reimplement the
	check which ensures that the related variable is in fact volatile.
	(Analyze_Pragma): Reimplement the analysis of external property pragmas.
	* sem_util.adb (Is_Enabled): New routine.
	(Variable_Has_Enabled_Property): Reimplement the detection of
	an enabled external property.

2014-07-30  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi, vms_data.ads: gnatstub: describe generating subunits
	for body stubs.

2014-07-30  Pascal Obry  <obry@adacore.com>

	* g-forstr.adb, g-forstr.ads: New.
	* gnat_rm.texi, impunit.adb Makefile.rtl: Add new unit
	GNAT.Formatted_String.

2014-07-30  Eric Botcazou  <ebotcazou@adacore.com>

	* exp_aggr.adb (Aggr_Assignment_OK_For_Backend): New predicate.
	(Expand_Array_Aggregate): Also enable in-place expansion for
	code generated by the compiler.  For an object declaration,
	set the kind of the object in addition to its type.  If an
	in-place assignment is to be generated and it can be directly
	done by the back-end, do not expand the aggregate.
	* fe.h (Is_Others_Aggregate): Declare.
	* gcc-interface/trans.c
	(gnat_to_gnu) <N_Assignment_Statement>: Add support for an
	aggregate with a single Others choice on the RHS by means of
	__builtin_memset.  Tidy up.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* gnat_rm.texi: minor reformatting.

2014-07-30  Yannick Moy  <moy@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Helper_Body): Remove body to inline
	in SPARK_Mode Off.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document additional implementation-defined use
	of Constrained.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* prj-proc.adb, prj-strt.adb: Update comments.

2014-07-30  Gary Dismukes  <dismukes@adacore.com>

	* sinfo.ads, einfo.ads, checks.ads: Minor typo fix and reformatting.

2014-07-30  Vincent Celier  <celier@adacore.com>

	* prj-proc.adb (Imported_Or_Extended_Project_From): New Boolean
	parameter No_Extending, defaulted to False. When No_Extending
	is True, do not look for an extending project.
	(Expression): For a variable reference that is not for the current
	project, get its Id calling Imported_Or_Extended_Project_From
	with No_Extending set to True.
	* prj-strt.adb (Parse_Variable_Reference): If a referenced
	variable is not found in the current project, check if it is
	defined in one of the projects it extends.

2014-07-30  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb (Predicate_Tests_On_Arguments): Omit tests for
	some additional cases of internally generated routines.

2014-07-30  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch10.adb (Analyze_Proper_Body): When compiling for ASIS,
	if the compilation unit is a subunit, extend optional processing
	to all subunits of the current one. This allows gnatstub to
	supress generation of spurious bodies.

2014-07-30  Hristian Kirtchev  <kirtchev@adacore.com>

	* a-cbmutr.adb (Insert_Child): Use local variable First to keep
	track of the initial element's index within the tree.

2014-07-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* a-cbmutr.adb (Allocate_Node): Remove the two parameter version.
	(Insert_Child): Add local variable First. Capture the index of the
	first node being created to ensure correct cursor construction
	later on. Use the three parameter version of Allocate_Node
	when creating multiple children as this method allows aspect
	Default_Value to take effect (if applicable).

2014-07-29  Eric Botcazou  <ebotcazou@adacore.com>

	* exp_aggr.adb (Safe_Slice_Assignment): Remove.
	(Expand_Array_Aggregate): For a safe slice assignment, just set
	the target and use the common code path.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb, sem_util.ads, sem_res.adb, exp_ch6.adb: Invert
	predicate No_Predicate_Test_On_Arguments, new name is
	Predicate_Tests_On_Arguments (with the opposite sense).

2014-07-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_attr.adb (Resolve_Attribute): Clean up the code for
	attribute 'Access. Do not generate an elaboration flag for a
	stand alone expression function. The expression of an expression
	function is now frozen when the expression function appears as
	the prefix of attribute 'Access.
	* sem_ch6.adb (Analyze_Expression_Function): Remove local
	variable New_Decl and update all references to it after the
	rewriting has taken place. Establish the linkages between the
	generated spec and body.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (ip, rv): Prevent from being optimized away.
	* gnatls.adb (gnatls): Set E_Fatal exit status if ali file not found.
	* s-imgllb.adb, s-imgllw.adb, s-imgwiu.adb, s-imgbiu.adb: Minor
	reformatting.

2014-07-29  Vincent Celier  <celier@adacore.com>

	* prj-pp.adb: Minor comment update.
	* frontend.adb: If a target dependency info file has been read
	through switch -gnateT= add it to the dependencies of the source
	being compiled.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, prj.adb: Minor reformatting.

2014-07-29  Vincent Celier  <celier@adacore.com>

	* prj-pp.adb (Pretty_Print.Output_Project_File): New
	procedure to output project file names between quotes without
	concatenation, even if the line is too long.
	(Pretty_Print): Use Output_Project_File for project being extended and
	project imported.

2014-07-29  Vincent Celier  <celier@adacore.com>

	* gnat_ugn.texi: Document that configuration pragmas files are
	added to the dependencies, unless they contain only pragmas
	Source_File_Name_Project.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* frontend.adb: Minor reformatting.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* exp_ch6.adb (Add_Call_By_Copy_Code): Minor reformatting
	(Expand_Actuals): Make sure predicate checks are properly applied
	for the case of OUT or IN OUT parameters.
	* sem_res.adb: Minor reformatting (Resolve_Actuals): Skip
	predicate tests on arguments for Finalize
	* sem_util.adb (No_Predicate_Test_On_Arguments): Returns True
	if predicate tests on subprogram arguments should be skipped.
	* sem_util.ads (No_Predicate_Test_On_Arguments): New function

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Analyze_Object_Declaration): If there is an address
	clause for the object and the expression is an aggregate, defer
	resolution and expansion of the aggregate until the freeze point
	of the entity.
	* sem_aggr.adb (Resolve_Aggregate): An others_clause is legal if
	the parent node is an N_Reference generated during expansion.

2014-07-29  Vincent Celier  <celier@adacore.com>

	* prj.adb (Add_To_Buffer): Effectively double the size of the buffer.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* frontend.adb, inline.adb, sem_util.adb, sem_res.adb,
	prepcomp.ads: Minor reformatting and code clean up.
	* exp_ch6.adb (Expand_Actuals): Generate predicate test
	unconditionally for case of OUT or IN OUT actual (before this
	was generated only for certain subcases, which is wrong, the
	test is always needed).

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb: Move Has_Defaulted_Discriminants to sem_util.
	* sem_ch4.adb (Analyze_Allocator): Defer resolution of expression
	until context type is available.
	* sem_res.adb (Resolve_Allocator): In the case of a qualified
	expression, complete resolution of expression.
	(Check_Aliased_Parameter): New procedure within Resolve_Actuals,
	to apply Ada2012 checks on aliased formals, as well as
	accesibility checks when the context of the call is an allocator
	or a qualified expression.
	* sem_util.ads, sem_util.adb (Has_Defaulted_Discriminants):
	Moved here from sem_ch3.
	(Object_Access_Level): Handle properly aliased formals and
	aggregates.
	* exp_ch6.adb (Expand_Call): Remove check on aliased parameters,
	now properly performed in sem_res (Resolve_Actuals,
	Check_Aliased_Parameter).

2014-07-29  Yannick Moy  <moy@adacore.com>

	* debug.adb Enable GNATprove inlining under debug flag -gnatdQ for now.
	* inline.ads, inline.adb (Can_Be_Inlined_In_GNATprove_Mode): New
	function to decide when a subprogram can be inlined in GNATprove mode.
	(Check_And_Build_Body_To_Inline): Include GNATprove_Mode as a
	condition for possible inlining.
	* sem_ch10.adb (Analyze_Compilation_Unit): Remove special case
	for Inline_Always in GNATprove mode.
	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Build inlined
	body for subprograms in GNATprove mode, under debug flag -gnatdQ.
	* sem_prag.adb Minor change in comments.
	* sem_res.adb (Resolve_Call): Only perform GNATprove inlining
	inside subprograms marked as SPARK_Mode On.
	* sinfo.ads: Minor typo fix.

2014-07-29  Vincent Celier  <celier@adacore.com>

	* frontend.adb: Add dependency on gnat.adc when taken into account
	and on non-temporary configuration pragmas files specified in
	switches -gnatec.
	* prepcomp.ads, prepcomp.adb (Add_Dependency): New procedure to add
	dependencies on configuration pragmas files.

2014-07-29  Pat Rogers  <rogers@adacore.com>

	* gnat_ugn.texi: Minor clarification to the explanation for the
	GNATtest -v switch.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* types.ads (Mechanism_Type): Change range back to -18 .. Int'Last with
	documentation that explains the need for this extended range
	(use by C_Pass_By_Copy).

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi, sem_prag.adb: Minor reformatting.

2014-07-29  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi: gnatmetric: clarify documentation for cyclomatic
	complexity metrics.

2014-07-29  Thomas Quinot  <quinot@adacore.com>

	PR ada/60652
	* s-oscons-tmplt.c: For Linux, define _BSD_SOURCE in order for
	CRTSCTS to be visible.

2014-07-29  Bob Duff  <duff@adacore.com>

	* g-trasym.adb, g-trasym.ads: Code cleanup.

2014-07-29  Doug Rupp  <rupp@adacore.com>

	* sigtramp-vxworks.c: Minor reformatting.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* gnat_rm.texi: No doc needed for Ada2012 aspect
	Implicit_dereference.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_attr.adb (Attribute_12): New array
	(Analyze_Attribute): Check impl-defined Ada 2012 attributes.
	(Check_Ada_2012_Attribute): Removed.

2014-07-29  Doug Rupp  <rupp@adacore.com>

	* init.c (vxworks6): Call sigtramp for RTP (as well as DKM) for ARM,
	PPC, and e500.
	* sigtramp-vxworks.c: New file.
	* sigtramp-armvxw.c, sigtramp-ppcvxw.c: removed files.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* lib-xref.adb (Output_Refs, Check_Type_Reference): For a
	derived array type, add information about component type, which
	was previously missing in ali file.
	* gnat_rm.texi: Add documentation for Atomic_Always_Lock_Free.

2014-07-29  Thomas Quinot  <quinot@adacore.com>

	* sem_ch3.adb (Constrain_Corresponding_Record): For the case
	of the subtype created for a record component, do not mark
	the subtype as frozen. For one thing, this is anomalous (in
	particular, the base type might not itself be frozen yet);
	furthermore, proper freezing of the subtype must happen in any
	case. So, we just mark the subtype as requiring delayed freezing
	(and we'll actually freeze it when generating the init_proc of
	the enclosing record).
	Also change the name of the constrained record subtype (append a
	'C' so that it is clearly different from the unconstrained record
	type, "related_idV") to make debugging easier.
	(Process_Full_View): When creating a full subtype for a pending
	private subtype, re-establish the scope of the private subtype
	so that we get proper visibility on outer discriminants.
	* exp_ch3.adb (Build_Init_Statements): Freeze any component
	subtype that is not frozen yet.

2014-07-29  Vincent Celier  <celier@adacore.com>

	* prj-proc.adb (Recursive_Process): Always initialize the
	environment when the project is an aggregate project, even when
	it is not the root tree.
2014-07-29  Robert Dewar  <dewar@adacore.com>

	* exp_ch5.adb, exp_ch9.adb: Minor comment additions.
	* gnat_rm.texi: Complete list of implementation aspects.
	* aspects.ads: Minor comment clarification.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch5.adb (Expand_N_Assignment_Statement): If the target type
	is a null-excluding access type, do not generate a constraint
	check if Suppress_Assignment_Checks is set on assignment node.
	* exp_ch9.adb (Build_Simple_Entry_Call): If actual is an out
	parameter of a null-excluding access type, there is access check
	on entry, so set Suppress_Assignment_Checks on generated statement
	that assigns actual to parameter block.
	* sinfo.ads: Document additional use of Suppress_Assignment_Checks.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Change theta to @ in documentation of aspect
	Dimension_System.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_attr.adb (Uneval_Old_Msg): Flags Uneval_Old_Accept/Warn
	are now on pragma.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Remove setting
	of Uneval_Old_*
	* sem_prag.adb (Analyze_Pragma): Set Uneval_Old_* flags
	* sinfo.ads, sinfo.adb: Move Uneval_Old_Accept/Warn to N_Pragma node.

2014-07-29  Javier Miranda  <miranda@adacore.com>

	* types.ads Update documentation on how to add new reason codes
	for exceptions.
	(RT_Exception_Code): Keep values ordered by their
	reason code.  Required by the .NET backend.
	(RT_CE_Exceptions): Subtype declaration removed.
	(RT_PE_Exceptions): Subtype declaration removed.
	(RT_SE_Exceptions): Subtype declaration removed.
	(Kind): New mapping table of RT_Exception_Codes.
	* exp_ch11.adb (Get_RT_Exception_Entity): Updated to use the
	new mapping table.
	* tbuild.adb (Make_Raise_Storage_Error): Updated to use the new
	mapping table.	(Make_Raise_Program_Error): Updated to use the
	new mapping table.
	(Make_Raise_Storage_Error): Updated to use the new mapping table.
	* a-except.adb Keep Rcheck_CE_xxx entities ordered according to
	their reason code.

2014-07-29  Thomas Quinot  <quinot@adacore.com>

	* gnat_rm.texi: Document internal attributes used for PolyORB/DSA
	distributed stubs generation.
	* exp_ch3.adb: Minor reformatting.

2014-07-29  Yannick Moy  <moy@adacore.com>

	* sinfo.ads: Document constraint between frontend and GNATprove.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* a-except.adb: Minor comment clarification.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Complete list of implementation attributes.
	* snames.ads-tmpl: Clean up list of impl-defined attributes.

2014-07-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* freeze.adb (Freeze_Record_Type): Perform various
	volatility-related checks.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, sem_eval.adb: Minor reformatting.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb: sem_attr.adb (Access_Attribute): Handle properly
	the case where the attribute reference appears in a nested scope
	from that of the subprogram prefix.
	* sem_attr.adb: Minor reformatting.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Clarify documentation of Initialize_Scalar
	initialization options.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sinfo.ads: Minor comment addition.

2014-07-29  Bob Duff  <duff@adacore.com>

	* sem_eval.adb, sem_ch13.adb: Minor reformatting.

2014-07-29  Doug Rupp  <rupp@adacore.com>

	* init.c: Complete previous change.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb (Expand_N_If_Expression): Deal with unconstrained
	array case.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Access_Attribute): If the prefix is a subprogram
	and the completion will appear in the same declarative part,
	create elaboration flag.
	* exp_util.adb (Set_Elaboration_Flag): If the subprogram body
	is a completion of a declaration in the same declarative part,
	and the subprogram has had its address taken, add elaboration
	check inside the subprogram body, to detect elaboration errors
	that may occur through indirect calls.

2014-07-29  Doug Rupp  <rupp@adacore.com>

	* sigtramp-armvxw.c: Enhance to handle RTP trampolining.
	* init.c: Remove guard on sigtramp for ARM VxWorks RTP.

2014-07-29  Vincent Celier  <celier@adacore.com>

	* switch-c.adb (Scan_Front_End_Switches): Do not fail when two
	runtime directorie specified with two switches --RTS= designate
	the same directory, even when there are no literarily the same.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Minor documentation clarification.
	* switch-c.adb: Minor reformatting.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Analyze_Pragma, case Allow_Integer_Address):
	Fix incorrect RTE call which caused bomb if pragma was in
	configuration pragma file.

2014-07-29  Jerome Lambourg  <lambourg@adacore.com>

	* expect.c (__gnat_expect_poll): Fix typo in previous change.
	* g-expect.adb: Update comments.

2014-07-29  Arnaud Charlet  <charlet@adacore.com>

	* s-parame-hpux.ads, s-parame-vms-ia64.ads, s-parame.ads
	(Default_Attribute_Count): Bump to 16 on native platforms.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb: Add guard to front-end inlining for SPARK.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_ch10.adb, debug.adb, sem_prag.adb, sem_res.adb, sem_ch6.adb:
	Minor reformatting.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Build body to
	inline in GNATprove mode when subprogran is marked Inline_Always.
	* sem_res.adb (Resolve_Call): Expand call in place in GNATProve
	mode if body to inline is available.
	* sem_prag.adb (Analyze_Pragma, case Inline_Always): Make pragma
	effective in GNATprove mode.
	* sem_ch10.adb (Analyze_Compilation_Unit): Call
	Check_Package_Body_For_Inlining in GNATprove mode, so that body
	containing subprograms with Inline_Always can be available before
	calls to them.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* inline.ads, inline.adb, sem_ch10.adb: Rename Check_Body_For_Inlining
	to Check_Package_Body_For_Inlining, to prevent confusion with other
	inlining subprograms.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* opt.ads: Minor comment update.
	* sem_attr.adb (Uneval_Old_Msg): Deal with case of aspect, where
	we want setting of Uneval_Old at time of encountering the aspect.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Capture setting
	of Opt.Uneval_Old.
	* sinfo.adb (Uneval_Old_Accept): New function (Uneval_Old_Warn):
	New function (Set_Uneval_Old_Accept): New procedure.
	(Set_Uneval_Old_Warn): New procedure.
	* sinfo.ads: Uneval_Old_Accept: New flag Uneval_Old_Warn: New flag.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sinfo.ads, inline.adb, inline.ads, sem_ch6.adb: Minor reformatting.
	* snames.ads-tmpl: Minor reformatting.
	* xsnamest.adb (XSnamesT): Remove special casing of Name_Error
	to give <Error>.  Not clear why this was there, but the compiler
	sources do not reference Name_Error, and this interfered with
	the circuits for pragma Unevaluated_Use_Of_Old.

2014-07-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Process_Atomic_Shared_Volatile): Allow volatile
	types in SPARK 2014 (again).
	* sem_res.adb (Is_OK_Volatile_Context): New routine.
	(Resolve_Entity_Name): Ensure that a volatile object with
	enabled properties Async_Writers or Effectire_Reads appears in
	a non-interfering context.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb: Move Build_Body_To_Inline,
	Check_And_Buid_Body_To_Inline, and Cannot_Inline to package Inline.
	* exp_ch6.adb: Mode Expand_Inlined_Body to package Inline.
	* inline.ads, inline.adb: Package now contains subprograms that
	implement front-end inlining.  No functional changes, no test
	needed.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* exp_dbug.adb, g-expect.adb, sem_elab.adb: Minor typo fix.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Return_Type): Reject a return type that
	is a limited view when the context is a package body, because
	there is no subsequent place at which the non-limited view may
	become visible.
	(Process_Formals): Ditto.
	* sinfo.ads, par-ch3.adb: Minor reformatting.

2014-07-29  Jerome Lambourg  <lambourg@adacore.com>

	* expect.c (__gnat_expect_poll): New parameter dead_process
	used to return the dead process among the array of file
	descriptors. The Windows, VMS and HPUX implementations now
	properly report the dead process via this parameter. Other unixes
	don't need it.
	* g-expect.adb (Poll): Adapt to the C profile.
	(Expect_Internal): Use the new parameter to properly close the
	File Descriptor.  This then can be properly reported by the
	function First_Dead_Process as is expected.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Minor clarification of -gnatQ switch.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* einfo.adb (Derived_Type_Link): New function
	(Set_Derived_Type_Link): New procedure.
	(Write_Field31_Name): Output Derived_Type_Link.
	* einfo.ads: New field Derived_Type_Link.
	* exp_ch6.adb (Expand_Call): Warn if change of representation
	needed on call.
	* sem_ch13.adb: Minor addition of ??? comment.
	(Rep_Item_Too_Late): Warn on case that is legal but could cause an
	expensive implicit conversion.
	* sem_ch3.adb (Build_Derived_Type): Set Derived_Type_Link if needed.

2014-07-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch3.adb (Build_Init_Procedure): Renamed Local_DF_Id
	to DF_Id. Add new local variable DF_Call. Do not perform any
	elaboration-related checks on the call to the partial finalization
	routine within an init proc to avoid generating bogus elaboration
	warnings on expansion-related code.
	* sem_elab.adb (Check_A_Call): Move constant Access_Case to
	the top level of the routine.  Ensure that Output_Calls takes
	into account flags -gnatel and -gnatwl when emitting warnings
	or info messages.
	(Check_Internal_Call_Continue): Update the call to Output_Calls.
	(Elab_Warning): Moved to the top level of routine Check_A_Call.
	(Emit): New routines.
	(Output_Calls): Add new formal parameter Check_Elab_Flag along with a
	comment on usage. Output all warnings or info messages only when the
	caller context demands it and the proper elaboration flag is set.

2014-07-29  Yannick Moy  <moy@adacore.com>

	* sem_attr.adb (Analyze_Attribute/Attribute_Old):
	Check rule about Old appearing in potentially unevaluated
	expression everywhere, not only in Post.

2014-07-29  Arnaud Charlet  <charlet@adacore.com>

	* sem_prag.adb: Update comment.
	* a-except.adb, a-except-2005.adb: Minor editing.

2014-07-29  Pierre-Marie Derodat  <derodat@adacore.com>

	* exp_dbug.adb (Debug_Renaming_Declaration):
	Do not create renaming entities for renamings of non-packed
	objects and for exceptions.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, sinfo.ads, types.ads, sem_prag.adb, a-except-2005.adb,
	sem_ch6.adb, par-ch3.adb: Minor reformatting.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Check_Return_Subtype_Indication): Reject a return
	subtype indication in an extended return statement when the
	return value is an ancestor of the return type of the function,
	and that return type is a null record extension.

2014-07-29  Thomas Quinot  <quinot@adacore.com>

	* sem_ch13.adb (Rep_Item_Too_Late): Specialize/clarify error
	message produced for the case of a type-related representation
	item that is made illegal by 13.10(1).
	* gnat_rm.texi (Scalar_Storage_Order): Minor change in
	documentation.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Add section on Wide_Wide_Character encodings.
	* erroutc.adb (Output_Error_Msgs): Take wide characters into
	account in computing position of error flags.
	* sinput.adb (Get_Column_Number): Take wide characters into
	account.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* par-ch3.adb (P_Access_Type_Definition): The subtype indication
	in an access type definition can carry a null_exclusion indicator.
	* sem_ch3.adb (Access_Type_Declaration): If the subtype indication
	carries a null_exclusion indicator, verify that the subtype
	indication denotes an access type, and create a null-excluding
	subtype for it.
	* sinfo.ads, sinfo.adb: New attribute Null_Excluding_Subtype,
	defined on N_Access_To_Object_Definition to indicate that the
	subtype indication carries a null_exclusion indicator.

2014-07-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch6.adb (Add_Extra_Actual): Do not construct
	the extra actual by name, generate a reference instead.

2014-07-29  Arnaud Charlet  <charlet@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Do not crash analyzing
	Allow_Integer_Address if already set.
	* a-except-2005.adb (Rcheck_PE_Stream_Operation_Not_Allowed):
	Fix order, for consistency with Rmsg_xx declarations.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Complete_Object_Operation): If the type of the
	candidate subprogram is a limited view, use non-limited view
	when available.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb: Minor change in RM reference.
	* sem_mech.ads: Minor reformatting.
	* einfo.ads: Minor comment fix.
	* types.ads: Minor correction to range given for Mechanism_Type.
	* exp_ch6.adb (Add_Invariant_And_Predicate_Checks): Do not
	check predicate on way out for OUT or IN OUT parameters.
	* par-ch3.adb (P_Constraint_Opt): Handle missing RANGE keyword
	better (P_Range_Constraint): Corresponding fix.
	* checks.ads: Minor comment clarification.

2014-07-29  Gary Dismukes  <dismukes@adacore.com>

	* sem_ch8.adb (Analyze_Object_Renaming): Set the Is_Volatile
	and Treat_As_Volatile flags based on whether the renamed object
	is a volatile object.

2014-07-29  Olivier Hainque  <hainque@adacore.com>

	* g-debpoo.adb
	(Default_Alignment): Rename as Storage_Alignment. This is not
	a "default" that can be overriden. Augment comment to clarify
	intent and document why we need to manage alignment padding.
	(Header_Offset): Set to Header'Object_Size instead of 'Size
	rounded up to Storage_Alignment. Storage_Alignment on the
	allocation header is not required by our internals so was
	overkill. 'Object_Size is enough to ensure proper alignment
	of the header address when substracted from a storage address
	aligned on Storage_Alignment.
	(Minimum_Allocation): Rename as Extra_Allocation, conveying that
	this is always added on top of the incoming allocation requests.
	(Align): New function, to perform alignment rounding operations.
	(Allocate): Add comments on the Storage_Address computation
	scheme and adjust so that the alignment padding applies to that
	(Storage_Address) only.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* exp_ch3.adb (Default_Initialize_Object): Remove incorrect
	pragma Unreferenced.
	* cstand.adb (Create_Standard): Use E_Array_Type for standard
	string types. Make sure index of Any_String/Any_Array is in a list.
	* errout.adb: Minor reformatting.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Clean up and correct documentation of warnings.
	* usage.adb: Minor corrections to make sure warnings are properly
	documented.
	* warnsw.adb (Set_Warning_Switch): Remove redundant return statement.
	(WA_Warnings): Add Warn_On_Suspicious_Modulus_Value.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Expand_N_Object_Declaration): The dummy block
	created to match internal sequence numbers between compilations
	with/without abort must have its type properly set.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* ali.adb (Initialize_ALI): Initialize SSO_Default_Specified
	(Scan_ALI): Set SSO_Default in ALIs_Record (Scan_ALI): Set
	SSO_Default_Specified.
	* ali.ads (ALIs_Record): Add field SSO_Default
	(SSO_Default_Specified): New global switch.
	* bcheck.adb (Check_Consistent_SSO_Default): New procedure
	(Check_Configuration_Consistency): Call this procedure
	* einfo.adb (SSO_Set_High_By_Default): New
	function (SSO_Set_Low_By_Default): New function
	(Set_SSO_Set_High_By_Default): New procedure
	(Set_SSO_Set_Low_By_Default): New procedure (Write_Entity_Flags):
	List new flags
	* einfo.ads (SSO_Set_Low_By_Default): New flag
	(SSO_Set_High_By_Default): New flag
	* freeze.adb (Set_SSO_From_Default): New procedure
	(Freeze_Array_Type): Call Set_SSO_From_Default
	(Freeze_Record_Type): Call Set_SSO_From_Default
	* gnat_rm.texi: Document pragma Default_Scalar_Storage_Order
	* lib-writ.adb (Write_ALI): Set OL/OH in P line as needed
	* lib-writ.ads: Add OL/OH parameters to P line
	* opt.adb: Set Default_SSO, Default_SSO_Config as appropriate
	* opt.ads (Default_SSO): New global switch (Default_SSO_Config):
	New global switch
	* repinfo.adb (List_Scalar_Storage_Order): List SSO when it is
	set by default using pragma Default_Scalar_Storage_Order.
	* sem.ads (Scope_Stack_Entry): Add component Save_Default_SSO
	* sem_ch13.adb (Inherit_Delayed_Rep_Aspects):
	Clear SSO defaults when explicit SSO is inherited.
	(Analyze_Attribute_Definition_Clause): Clear SSO defaults when
	explicit SSO is specified.
	(Inherit_Aspects_At_Freeze_Point):
	Clear SSO default when inheriting SSO.
	* sem_ch3.adb (Set_Default_SSO): New procedure
	(Analyze_Private_Extension_Declaration): Set defualt SSO
	(Array_Type_Declaration): ditto (Build_Derived_Array_Type): ditto
	(Build_Derived_Private_Type): ditto (Build_Derived_Record_Type):
	ditto (Build_Derived_Type): ditto (Make_Class_Wide_Type): ditto
	(Record_Type_Declaration): ditto
	* sem_ch8.adb (Pop_Scope): Restore Default_SSO (Push_Scope):
	Save Default_SSO
	* sem_prag.adb (Analyze_Pragma, case
	Default_Scalar_Storage_Order): Set Default_SSO

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Valid_Operator_Definition): Verify that
	all parameter have mode IN. This check must be done here for
	subprogram instantiations that have operator names, because their
	analysis does not follow the same path as that for subprogram
	declarations.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* freeze.adb (Freeze_Entity, Concurrent_Type case): Add a guard
	to make sure that the Etype of a component of the corresponding
	record type is present before trying to freeze it.
	* sem_ch5.adb: Minor reformatting.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb, types.ads, types.h, exp_ch11.adb, a-except.adb,
	a-except-2005.adb: Add new reason code PE_Stream_Operation_Not_Allowed,
	and then use it when a stream operation is used from a library generic
	when the restriction (No_Streams) is active.

2014-07-29  Thomas Quinot  <quinot@adacore.com>

	* projects.texi: Fix minor typo.

2014-07-29  Yannick Moy  <moy@adacore.com>

	* sem_attr.adb (Analyze_Attribute): Fix generation of warning.

2014-07-29  Arnaud Charlet  <charlet@adacore.com>

	* sem_ch5.adb (Check_Unreachable_Code): Do not remove code in
	CodePeer mode.

2014-07-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch7.adb (Find_Last_Init): Add local variable
	Deep_Init_Found. Check the statement immediately following the
	declaration if [Deep_]Initialization was not found.

2014-07-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_util.adb (Is_Aliased): It appears that
	'reference-d and renamed objects still play some role in Boolean
	expression with actions and cannot be finalized immediately.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* exp_dbug.adb (Qualify_Needed):  For debugging purposes,
	Loop names are not part of the full qualification of entity names.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* einfo.adb (Has_Protected): Test base type.
	* sem_ch4.adb (Analyze_Allocator): Reorganize code to make sure
	that we always properly check No_Protected_Type_Allocators.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.ads, sem_util.adb (Defining_Entity):	Now applies to
	loop declarations as well.
	* exp_ch5.adb (Expand_Loop_Statement): Apply Qualify_Entity_Names
	to an iterator loop, because it may contain local renaming
	declarations that require debugging information.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_util.ads, exp_util.adb, sem_attr.adb: Minor reformatting.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* einfo.ads, einfo.adb (Static_Real_Or_String_Predicate): New function
	(Set_Static_Real_Or_String_Predicate): New procedure
	* sem_ch13.adb (Build_Predicate_Functions): Accomodate static
	string predicates (Is_Predicate_Static): Handle static string
	predicates.
	* sem_eval.adb (Real_Or_String_Static_Predicate_Matches):
	New procedure (Check_Expression_Against_Static_Predicate):
	Deal with static string predicates, now fully implemented
	(Eval_Relational_Op): Allow string equality/inequality as static
	if not comes from source.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_aggr.adb, exp_ch5.adb, sem_ch5.adb, exp_util.adb, einfo.adb,
	einfo.ads, sem_util.adb, sem_attr.adb, sem_case.adb, sem_eval.adb,
	sem_eval.ads, sem_ch13.adb: General cleanup of static predicate
	handling. Change name of Discrete_Predicate to
	Discrete_Static_Predicate, and replace testing of the presence of this
	field by testing the flag Has_Static_Expression.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document pragma Unevaluated_Use_Of_Old.
	* opt.adb: Handle Uneval_Old.
	* opt.ads (Uneval_Old, Uneval_Old_Config): New variables.
	* par-prag.adb: Add dummy entry for pragma Unevaluated_Use_Of_Old.
	* sem.ads (Save_Uneval_Old): New field in Scope_Stack_Entry.
	* sem_attr.adb (Uneval_Old_Msg): New procedure.
	* sem_ch8.adb (Push_Scope): Save Uneval_Old.
	(Pop_Scope): Restore Uneval_Old.
	* sem_prag.adb (Analyze_Pragma, case Unevaluated_Use_Of_Old):
	Implemented.
	* snames.ads-tmpl: Add entries for pragma Unevaluated_Use_Of_Old
	Add entries for Name_Warn, Name_Allow.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_aggr.adb (Resolve_Array_Aggregate): Change Is_Static_Range
	to Is_OK_Static_Range.
	* sem_attr.adb (Eval_Attribute): Make sure we properly flag
	static attributes (Eval_Attribute, case Size): Handle size of
	zero properly (Eval_Attribute, case Value_Size): Handle size of
	zero properly.
	* sem_ch13.adb: Minor reformatting.
	* sem_ch3.adb (Process_Range_Expr_In_Decl): Change
	Is_Static_Range to Is_OK_Static_Range.
	* sem_eval.adb (Eval_Case_Expression): Total rewrite, was
	wrong in several ways (Is_Static_Range): Moved here from spec
	(Is_Static_Subtype): Moved here from spec Change some incorrect
	Is_Static_Subtype calls to Is_OK_Static_Subtype.
	* sem_eval.ads: Add comments to section on
	Is_Static_Expression/Raises_Constraint_Error (Is_OK_Static_Range):
	Add clarifying comments (Is_Static_Range): Moved to body
	(Is_Statically_Unevaluated): New function.
	* sem_util.ads, sem_util.adb (Is_Preelaborable_Expression): Change
	Is_Static_Range to Is_OK_Static_Range.
	* sinfo.ads: Additional commments for Is_Static_Expression noting
	that clients should almost always use Is_OK_Static_Expression
	instead. Many other changes throughout front end units to obey
	this rule.
	* tbuild.ads, tbuild.adb (New_Occurrence_Of): Set Is_Static_Expression
	for enumeration literal.
	* exp_ch5.adb, sem_intr.adb, sem_ch5.adb, exp_attr.adb, exp_ch9.adb,
	lib-writ.adb, sem_ch9.adb, einfo.ads, checks.adb, checks.ads,
	sem_prag.adb, sem_ch12.adb, freeze.adb, sem_res.adb, exp_ch4.adb,
	exp_ch6.adb, sem_ch4.adb, sem_ch6.adb, exp_aggr.adb, sem_cat.adb:
	Replace all occurrences of Is_Static_Expression by
	Is_OK_Static_Expression.

2014-07-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Process_Transient_Object): Remove constant
	In_Cond_Expr, use its initialization expression in place.
	* exp_ch7.adb (Process_Declarations): There is no need to check
	that a transient object being hooked is controlled as it would
	not have been hooked in the first place.
	* exp_util.adb (Is_Aliased): 'Reference-d or renamed transient
	objects are not considered aliased when the related context is
	a Boolean expression_with_actions.
	(Requires_Cleanup_Actions): There is no need to check that a transient
	object being hooked is controlled as it would not have been hooked in
	the first place.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* errout.adb: Minor reformatting.

2014-07-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch3.adb (Default_Initialize_Object): Add new variables
	Abrt_Blk and Dummy. Generate a dummy temporary when aborts are
	not allowed to ensure the symmetrical generation of symbols.
	* exp_ch7.adb (Build_Object_Declarations): Remove variables A_Expr
	and E_Decl. Add new variables Decl and Dummy. Generate a dummy
	temporary when aborts are not allowed to ensure symmertrical
	generation of symbols.
	* exp_intr.adb (Expand_Unc_Deallocation): Add new variable
	Dummy. Generate a dummy temporary when aborts are not allowed
	to ensure symmertrical generation of symbols.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* exp_dbug.adb (Debug_Renaming_Declaration): For an object
	renaming, indicate that the renamed entity itself needs debug
	information. This is necessary if that entity is a temporary,
	e.g. part of the expansion of an explicit dereference in an
	iterator.

2014-07-29  Thomas Quinot  <quinot@adacore.com>

	* errout.adb (Set_Error_Posted): When propagating flag to
	an enclosing named association, also propagate to the parent
	of that node, so that named and positional associations are
	treated consistently.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Resolve_Attribute, case 'Update):  Set
	Do_Range_Check properly on array component expressions that
	have a scalar type. In GNATprove mode, only checks on scalar
	components must be marked by the front-end.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Resolve_Type_Conversion): If the type of the
	expression is a limited view, use the non-limited view when
	available.

2014-07-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Expand_N_Case_Expression): Mark the generated
	case statement as coming from a conditional expression.
	(Expand_N_If_Expression): Mark the generated if statement as
	coming from a conditional expression.
	* exp_ch5.adb (Expand_N_Case_Statement): Do not process controlled
	objects found in case statement alternatives when the case
	statement is actually a case expression.
	(Expand_N_If_Statement):
	Do not process controlled objects found in an if statement when
	the if statement is actually an if expression.
	* sinfo.adb (From_Conditional_Expression): New routine.
	(Set_From_Conditional_Expression): New routine.
	* sinfo.ads Add new semantic flag From_Conditional_Expression and
	update related nodes.
	(From_Conditional_Expression): New routine along with pragma Inline.
	(Set_From_Conditional_Expression): New routine along with pragma Inline.

2014-07-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch7.adb (Build_BIP_Cleanup_Stmts): Remove
	formal parameter Obj_Id and update the comment on usage. Renamed
	Obj_Typ to Func_Typ and update all occurrences.
	(Find_Last_Init): Remove formal parameter Decl and update the comment
	on usage.
	Remove local constants Obj_Id and Obj_Typ. Remove local variables
	Init_Typ and Is_Conc. Remove the extraction of the initialization type.
	(Find_Last_Init_In_Block): Remove formal parameter
	Init_Typ and update the comment on usage.
	(Is_Init_Call): Remove formal parameter Init_Typ and update the comment
	on usage. Check whether the procedure call is an initialization
	procedure of either the object type or the initialization type.
	(Is_Init_Proc_Of): New routine.
	(Process_Object_Declaration): Obj_Id and Obj_Typ are now global to this
	routine. Add new variable Init_Typ. Add circuitry to extract the object
	type as well as the initialization type.

2014-07-29  Robert Dewar  <dewar@adacore.com>

	* sem_case.adb: Minor reformatting.
	* sem_aux.ads: Minor reformatting.

2014-07-29  Ed Schonberg  <schonberg@adacore.com>

	* sinfo.adb (Set_Else_Actions, Set_Then_Actions): Set parent
	pointer on these fields, even though they are semantic, because
	subsequent analysis and expansion of action nades may require
	exploring the tree, for example to locate a node to be wrapped
	when a function with controlled result is called.

2014-07-29  Claire Dross  <dross@adacore.com>

	* sem_aux.adb (Get_Binary_Nkind): Use case on
	Name_Id instead of an intermediate string.
	(Get_Unary_Nkind): Use case on Name_Id instead of an intermediate
	string.

2014-07-29  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi (gnatelim, gnatstub, gnatmetric): Add note
	about processing sources with preprocessor directives.

2014-07-24  Martin Liska  <mliska@suse.cz>

	* gcc-interface/trans.c (finalize_nrv): Adjust function call.
	* gcc-interface/utils.c (rest_of_subprog_body_compilation): Likewise.
	(gnat_write_global_declarations): Likewise.

2014-07-19  David Wohlferd  <dw@LimeGreenSocks.com>

	* gnat_rm.texi: Clean up for makeinfo 5.2.

2014-07-19  David Wohlferd  <dw@LimeGreenSocks.com>

	* gnat_rm.texi (Machine Code Insertions): Clean up.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* exp_ch7.adb: Minor reformatting.

2014-07-18  Claire Dross  <dross@adacore.com>

	* sem_aux.ads (Get_Binary_Nkind): New function that returns
	the Node_Kind value of an entity defining a binary operator.
	(Get_Unary_Nkind): New function that returns the Node_Kind value
	of an entity defining a unary operator.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* sysdep.c: comment update.
	* adaint.c (__gnat_fputwc): Use wchar_t on a limited set of
	platforms where it is known to be supported.

2014-07-18  Thomas Quinot  <quinot@adacore.com>

	* sem_dist.adb (Process_Remote_AST_Declaration): Need
	to set Fat_Type's Ekind in order to be able to use its
	Corresponding_Remote_Type attribute.

2014-07-18  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb Last_Aggregate_Assignment is now Node 30.
	(Last_Aggregate_Assignment): Include
	constants in the assertion. Update the underlying node.
	(Set_Last_Aggregate_Assignment): Include constants in the
	assertion. Update the underlying node.	(Write_Field11_Name):
	Remove the entry for Last_Aggregate_Assignment.
	(Write_Field30_Name): Add an entry for Last_Aggregate_Assignment.
	* einfo.ads Update the node designation and usage of attribute
	Last_Aggregate_Assignment.
	* exp_aggr.adb (Expand_Array_Aggregate): Store the last
	assignment statement used to initialize a controlled object.
	(Late_Expansion): Store the last assignment statement used to
	initialize a controlled record or an array of controlled objects.
	* exp_ch3.adb (Expand_N_Object_Declaration): Default
	initialization of objects is now performed in a separate routine.
	(Default_Initialize_Object): New routine.
	* exp_ch7.adb (Build_BIP_Cleanup_Stmts): Add formal parameter
	Obj_Id. Update the comment on usage.
	(Find_Last_Init): Remove formal parameter Typ. Update comment on usage.
	Reimplement the logic.	(Find_Last_Init_In_Block): New routine.
	(Is_Init_Call): Add formal parameter Init_Typ. Update the
	comment on usage.  Account for the type init proc when trying
	to determine whether a statement is an initialization call.
	(Make_Adjust_Call): Rename formal parameter For_Parent to
	Skip_Self. Update all occurrences of For_Parent. Account for
	non-tagged types. Update the call to Make_Call.
	(Make_Call): Rename formal parameter For_Parent to Skip_Self. Update
	comment on usage. Update all occurrences of For_Parent.
	(Make_Final_Call): Rename formal parameter For_Parent to
	Skip_Self. Update all occurrences of For_Parent. Account
	for non-tagged types. Update the call to Make_Call.
	(Process_Object_Declaration): Most variables and constants are
	now local to the routine.
	* exp_ch7.ads (Make_Adjust_Call): Rename formal parameter
	For_Parent to Skip_Self. Update the comment on usage.
	(Make_Final_Call): Rename formal parameter For_Parent to
	Skip_Self. Update the comment on usage.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch9.adb (Analyze_Requeue): The entry being referenced
	can be a procedure that is implemented by entry, and have a
	formal that is a synchronized interface.  It does not have to
	be declared as a protected operation.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Remove mention of obsolete attributes
	Max[_Interrupt]_Priority, which have never been implemented
	(or at the very least were removed long ago if they ever were
	implemented.  Add documentation of Max[_Interrupt]_Priority
	constants in package System.
	* ttypes.ads: Document actual handling of package System,
	rather than a historical fantasy version.  Remove mention of
	non-existent attributes Max[_Interrupt]_Priority.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* a-witeio.adb (Put): No 16-bit character output when text
	translation is disabled.
	* i-cstrea.ads: Code clean up.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document that Wchar_T_Size and Word_Size are
	static attributes.

2014-07-18  Arnaud Charlet  <charlet@adacore.com>

	* a-witeio.adb, initialize.c: Update comments. Minor clean ups.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* adaint.c: Do not include wchar.h on VxWorks.
	* mingw32.h: Remove obsolete definition.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* a-textio.adb, a-witeio.adb, a-ztexio.adb: Use C_Streams Default_Text.
	* i-cstrea.ads (Content_Encoding): Moved here, add convention C.
	* s-ficobl.ads (Content_Encoding): Moved to C_Streams.
	* s-fileio.adb (Open): Adjust to use Content_Encoding from C_Streams.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* a-textio.adb: Rename Is_Text_File to Text_Encoding.
	* a-ztexio.adb: Likewise.
	* a-witeio.adb: Likewise.
	(Open): Pass file's translation mode to set_text_mode.
	* s-ficobl.ads (Content_Encoding): New type.
	(Text_Content_Encoding): New subtype.
	(AFCB): Rename Is_Text_File to Text_Encoding.
	* s-fileio.adb (Open): Handles new text_translation
	values. Remove Is_Text_File which is equivalent to Text_Encoding
	in Text_Content_Encoding.
	* adaint.h (__gnat_set_mode): New routine.
	* sysdep.c (__gnat_set_wide_text_mode): Removed.
	(__gnat_set_mode): New routine.

2014-07-18  Arnaud Charlet  <charlet@adacore.com>

	* gcc-interface/decl.c, gcc-interface/trans.c,
	gcc-interface/utils.c (Is_Packed_Array_Type): Renamed 
	Is_Packed_Array_Impl_Type.

2014-07-18  Gary Dismukes  <dismukes@adacore.com>

	* sem_util.adb: Minor typo correction.

2014-07-18  Ben Brosgol  <brosgol@adacore.com>

	* gnat_rm.texi: Complete previous change.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* s-fileio.adb: Minor style fix.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): Detect improper
	specification of stream attributes for subtypes that are not
	first subtypes, to prevent malformed rep_item chains in the case
	of such illegal specifications for discriminated private subtypes.
	(Check_Overloaded_Name): Verify that the name is an entity name
	before other checks.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* adaint.c (__gnat_fputwc) Do not disable on cross-build.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb, sem_attr.adb,
	sem_aggr.adb, sinfo.ads, sem_eval.ads: Minor reformatting.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* sysdep.c (__gnat_wide_text_translation_required): Removed from here.
	* initialize.c (__gnat_wide_text_translation_required): Defined here.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* adaint.c (__gnat_fputwc): New routine.
	* s-crtl.ads (fputwc): Now imported as __gnat_fputwc.

2014-07-18  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb: Flag 270 is now used as Stores_Attribute_Old_Prefix.
	(Set_Stores_Attribute_Old_Prefix): New routine.
	(Stores_Attribute_Old_Prefix): New routine.
	(Write_Entity_Flags):
	Output flag Stores_Attribute_Old_Prefix.
	* einfo.ads Add new flag Stores_Attribute_Old_Prefix along with
	comment on usage.
	(Set_Stores_Attribute_Old_Prefix): New routine
	along with pragma Inline.
	(Stores_Attribute_Old_Prefix): New
	routine along with pragma Inline.
	* exp_attr.adb (Expand_N_Attribute_Reference): Mark the generated
	constant which captures the result of attribute 'Old's prefix.
	* sem_util.adb (In_Assertion_Expression_Pragma): Recognize a
	relocated expression which acted as a prefix of attribute 'Old.

2014-07-18  Bob Duff  <duff@adacore.com>

	* s-spsufi.adb (Finalize_And_Deallocate): Set Subpool.Owner to
	null before dispatching to Deallocate_Subpool.
	* s-stposu.ads (Default_Subpool_For_Pool): Change mode of
	parameter of Default_Subpool_For_Pool to 'in out'.
	* s-stposu.adb (Set_Pool_Of_Subpool): Use raise expression. Add
	a message to the raise.
	* sem_util.adb: Minor reformatting.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb (Check_Expression_Against_Static_Predicate):
	Mark expression as non-static if it fails static predicate check,
	and issue additional warning.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* a-witeio.adb (Put): Control translation based on
	wide_text_translation_required.
	* adaint.c (CurrentCCSEncoding): New variable.
	* initialize.c (__gnat_initialize): On Windows initialize
	CurrentCCSEncoding based on values in GNAT_CCS_ENCODING
	environment variable.
	* mingw32.h (CurrentCCSEncoding): New external.
	(__gnat_wide_text_translation_required): Likewise.
	* sysdep.c (wide_text_translation_required): New variable.
	(__gnat_set_wide_text_mode): Set mode based on CurrentCCSEncoding.

2014-07-18  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Refined_Depends_In_Decl_Part): Remove global
	variable Refined_States.  Add global variable Matched_Items.
	(Check_Dependency_Clause): Account for dependency
	clauses utilizing states with visible null refinements.
	(Is_Null_Refined_State): New routine.
	(Match_Items): Record each successfully matched item of pragma Depends.
	(Record_Item): New routine.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Analyze_Attribute, case 'Update): Set
	Do_Range_Check flag on a dynamic index expression used in a
	component association in the argument of Update.

2014-07-18  Gary Dismukes  <dismukes@adacore.com>

	* einfo.ads, sem_eval.ads, sem_ch13.adb: Minor reformatting.

2014-07-18  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch6.adb (Expand_Simple_Function_Return): Redo the marking
	of enclosing blocks, loops and the enclosing function using a
	parent-based traversal.
	* exp_util.adb (Wrap_Statements_In_Block): Suppress the secondary
	stack reclamation if the iterator loop contains a return statement
	that uses the stack.
	* sem_ch5.adb (Analyze_Loop_Statement): There is no need to
	patch up the scope stack as the secondary stack management now
	takes into account the enclosing function of the iterator loop.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, g-memdum.ads, i-cstrea.ads: Minor reformatting.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* einfo.adb (Has_Static_Predicate): New function.
	(Set_Has_Static_Predicate): New procedure.
	* einfo.ads (Has_Static_Predicate): New flag.
	* sem_ch13.adb (Is_Predicate_Static): New function
	(Build_Predicate_Functions): Use Is_Predicate_Static to reorganize
	(Add_Call): Minor change in Sloc of generated expression
	(Add_Predicates): Remove setting of Static_Pred, no longer used.
	* sem_ch4.adb (Has_Static_Predicate): Removed this function,
	replace by use of the entity flag Has_Static_Predicate_Aspect.
	* sem_eval.adb (Eval_Static_Predicate_Check): Check real case
	and issue warning that predicate is not checked for now.
	* sem_eval.ads (Eval_Static_Predicate_Check): Fix comments in
	spec.
	* sem_util.adb (Check_Expression_Against_Static_Predicate):
	Carry out check for any case where there is a static predicate,
	and output appropriate message.
	* sinfo.ads: Minor comment corrections.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Expand_Freeze_Record_Type): If the type is derived
	from an untagged private type whose full view is tagged, the type
	is marked tagged for layout reasons, but it has no dispatch table,
	so Set_All_DT_Position must not be called.
	* exp_ch13.adb: If the freeze node is for a type internal to a
	record declaration, as is the case for a class-wide subtype
	of a parent component, the relevant scope is the scope of the
	enclosing record.

2014-07-18  Thomas Quinot  <quinot@adacore.com>

	* g-memdum.adb, g-memdum.ads: Code clean ups.

2014-07-18  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Check_Dependency_Clause):
	Update the comment on usage. Reimplement the mechanism which
	attempts to match a single clause of Depends against one or
	more clauses of Refined_Depends.
	(Input_Match): Removed.
	(Inputs_Match): Removed.
	(Is_Self_Referential): Removed.
	(Normalize_Clause): Update the call to Split_Multiple_Outputs.
	(Normalize_Outputs): Rename variable Split to New_Claue and update
	all its occurrences.
	(Report_Extra_Clauses): Update the comment on usage.
	(Split_Multiple_Outputs): Renamed to Normalize_Outputs.

2014-07-18  Gary Dismukes  <dismukes@adacore.com>

	* i-cstrea.ads: Minor reformatting.

2014-07-18  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_util.adb (Wrap_Statements_In_Block): Propagate both
	secondary stack-related flags to the generated block.
	* sem_ch5.adb (Analyze_Loop_Statement): Update the scope chain
	once the loop is relocated in a block.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* repinfo.ads: Add documentation on handling of back annotation
	for dynamic case.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* sinfo.ads, sinfo.adb (Incomplete_View): New semantic attribute
	of full type declaration, denotes previous declaration for
	incomplete view of the type.
	* sem_ch3.adb (Analyze_Full_Type_Declaration): Set Incomplete_View
	of declaration if one is present.
	(Replace_Type): When constructing the signature of an inherited
	operation, handle properly the case where the operation has a
	formal whose type is an incomplete view.
	* sem_util.adb (Collect_Primitive_Operations): Handle properly
	the case of an operation declared after an incomplete declaration
	for a type T and before the full declaration of T.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* i-cstrea.ads: Add documentation for set_wide_text_mode.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* a-witeio.adb: Minor code reorganization.
	* i-cstrea.ads: Add comment.

2014-07-18  Thomas Quinot  <quinot@adacore.com>

	* s-oscons-tmplt.c (NAME_MAX): Minor cleaup and comment
	clarifications.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* g-memdum.adb, g-memdum.ads, exp_strm.adb: Minor reformatting.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* s-crtl.ads, i-cstrea.ads (fputwc): New routine.
	* a-witeio.adb (Put): On platforms where there is translation
	done by the OS output the raw text.
	(New_Line): Use Put above to properly handle the LM wide characters.

2014-07-18  Thomas Quinot  <quinot@adacore.com>

	* g-memdum.adb, g-memdum.ads (Dump): New parameter Prefix, defaulted
	to Absolute_Address.

2014-07-18  Eric Botcazou  <ebotcazou@adacore.com>

	* opt.ads (Suppress_Back_Annotation): Remove as unused.
	* fe.h (Back_Annotate_Rep_Info): Likewise.
	(Global_Discard_Names): Likewise.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb (Is_Type_Ref): Check that type name is not
	parenthesized.

2014-07-18  Vincent Celier  <celier@adacore.com>

	* s-osinte-vms.ads: Fix style errors.

2014-07-18  Thomas Quinot  <quinot@adacore.com>

	* s-oscons-tmplt.c (_POSIX_SOURCE): Define in order to get
	NAME_MAX and PATH_MAX.

2014-07-18  Bob Duff  <duff@adacore.com>

	* exp_strm.adb (Build_Record_Or_Elementary_Input_Function,
	Build_Record_Or_Elementary_Output_Procedure): For Input and
	Output attributes, do not read/write the discriminants if they
	have default values; that will be done by Read/Write.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* sem_aggr.adb, exp_ch5.adb, sem_ch3.adb, layout.adb, sem_type.adb,
	exp_util.adb, exp_attr.adb, einfo.adb, einfo.ads, exp_pakd.adb,
	checks.adb, exp_pakd.ads, freeze.adb, sem_util.adb, exp_dbug.adb,
	exp_dbug.ads, exp_ch4.adb, sem_ch8.adb, exp_aggr.adb, sem_eval.adb,
	sem_ch13.adb: Change name Packed_Array_Type to Packed_Array_Impl_Type.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* lib-writ.adb, makeutl.adb, ali.ads: Minor reformatting.

2014-07-18  Vincent Celier  <celier@adacore.com>

	* lib-writ.ads: Update documentation about the D lines.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Replace_Type_References_Generic): Use type entity
	as a parameter, rather than its Chars field, in order to locate
	freeze node of type. If the predicate or invariant has references
	to types other than the one to which the contract applies, these
	types must be frozen, and the corresponding predicate functions
	created, before that freeze node.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* freeze.adb, einfo.ads, einfo.adb: Minor code reorganization.
	* par_sco.adb: Minor reformatting.

2014-07-18  Gary Dismukes  <dismukes@adacore.com>

	* exp_ch4.adb (Real_Range_Check): Turn off
	the Do_Range_Check flag on the conversion's current Expression
	argument rather than on the originally captured Operand node,
	as Expression may reflect a rewriting (as in conversions to a
	fixed-point type).

2014-07-18  Vincent Celier  <celier@adacore.com>

	* ali.adb (Scan_ALI): Set Sdep_Record.Unit_Name, when the unit
	is not a subunit.
	* ali.ads (Sdep_Record): New component Unit_Name.
	* lib-writ.adb (Write_ALI): Write the unit name in D lines.
	* makeutl.adb (Check_Source_Info_In_ALI): Return False if a
	dependent unit is in a project and the source file name is not
	one of its sources.

2014-07-18  Bob Duff  <duff@adacore.com>

	* s-addima.ads: Minor: add comment.

2014-07-18  Thomas Quinot  <quinot@adacore.com>

	* freeze.adb (Check_Component_Storage_Order): Fix enforcement
	of nesting rules for composites with different SSOs.

2014-07-18  Thomas Quinot  <quinot@adacore.com>

	* par_sco.adb (Is_Logical_Operator): An If_Expression is not
	a proper logical operator.
	(Has_Decision): An If_Expression indicates the presence of a decision
	although it is not a logical operator.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Remove note that -gnatR not allowed with -gnatc.
	* switch-c.adb: Remove prohibition of -gnatR and -gnatc together.

2014-07-18  Eric Botcazou  <ebotcazou@adacore.com>

	* sem_ch13.adb (Kill_Rep_Clause): Clear Comes_From_Source flag
	on the null statement.

2014-07-18  Thomas Quinot  <quinot@adacore.com>

	* adaint.c: Minor comment rewording.
	* socket.c: Define macros _REENTRANT and _THREAD_SAFE so that
	use of errno in this file is thread safe.

2014-07-18  Arnaud Charlet  <charlet@adacore.com>

	* gnat_ugn.texi: Doc clarification.
	* sem_ch13.adb (Kill_Rep_Clause): Use Replace not Rewrite.
	* sem_ch13.ads: Minor comment update.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* repinfo.ads: Minor comment fix.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* par-prag.adb: Add dummy entry for Default_Scalar_Storage_Order.
	* sem_prag.adb: Add dummy implementation of
	Default_Scalar_Storage_Order.
	* snames.ads-tmpl: Add dummy entry for
	Default_Scalar_Storage_Order pragma.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* opt.adb (Tree_Read): Read Address_Is_Private,
	Ignore_Rep_Clauses, Ignore_Style_Check_Pragmas, Multiple_Unit_Index.
	(Tree_Write): Corresponding writes
	* opt.ads: Minor comment reformatting and fixes.
	* tree_io.ads: Increment ASIS_Version_Number.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* sem_attr.adb, s-os_lib.ads, prj-tree.adb: Minor reformatting.
	* types.h: Fix typo.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* freeze.adb (Check_Address_Clause): Use Kill_Rep_Clause (no
	functional change).
	* gnat_ugn.texi: Document that -gnatI removes rep clauses from
	ASIS trees.
	* sem_ch13.adb (Kill_Rep_Clause): New procedure
	(Analyze_Attribute_Definition_Clause): Use
	Kill_Rep_Clause. This is just a cleanup, no functional effect.
	(Analyze_Enumeration_Representation_Clause):
	Use Kill_Rep_Clause. This means that enum rep
	clauses are now properly removed from -gnatct trees.
	(Analyze_Record_Representation_Clause): Same change.
	* sem_ch13.ads (Kill_Rep_Clause): New procedure.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* s-os_lib.ads, s-os_lib.adb (GM_Time_Of): New routine to create an
	OS_Time from time parts.
	* adaint.h, adaint.c (__gnat_to_os_time): New routine.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Try_Container_Indexing): Refine previous patch for
	indexing over containers that are derived types: check whether
	signature of found operation has the correct first parameter
	before retrieving directly a primitive operation.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Analyze_Attribute, case 'Update): Set
	Do_Range_Check flag on dynamic bounds of a range used in a
	component association in the argument of Update.

2014-07-18  Thomas Quinot  <quinot@adacore.com>

	* adaint.c: #define _REENTRANT and _THREAD_SAFE in order for
	accesses to errno(3) to be thread safe.

2014-07-18  Vincent Celier  <celier@adacore.com>

	* prj-tree.adb (Imported_Or_Extended_Project_Of): For each non
	limited imported project that is an extending project, return
	a project being extended if it has the expected name.

2014-07-18  Pascal Obry  <obry@adacore.com>

	* s-os_lib.ads, s-os_lib.adb (Set_File_Last_Modify_Time_Stamp): New
	routine to set the last modification time stamp for the given file.
	* gnatchop.adb (File_Time_Stamp): Removed.
	(Write_Unit): Use
	Set_File_Last_Modify_Time_Stamp instead of ad-hoc implementation.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* sem_aggr.adb (Aggregate_Constraint_Checks): Moved to sem_util.
	* sem_util.ads, sem_util.adb (Aggregate_Constraint_Checks):
	Moved here, so it can be shared with the resolution of 'Update,
	whose argument shares some features with aggregates.
	* sem_attr.adb (Resolve_Attribute, case 'Update): Apply
	Aggregate_Constraint_Checks with the expression of each
	association, so that the Do_Range_Check flag is set when needed.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Try_Container_Indexing):  If the container
	type is a derived type, the value of the inherited  aspect is
	the Reference operation declared for the parent type. However,
	Reference is also a primitive operation of the new type, and
	the inherited operation has a different signature. We retrieve
	the right one from the list of primitive operations of the
	derived type.

2014-07-18  Vincent Celier  <celier@adacore.com>

	* debug.adb: Update comment.

2014-07-18  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_util.adb (Needs_Finalization): There is no reason why a
	C type should not benefit from finalization actions.

2014-07-18  Thomas Quinot  <quinot@adacore.com>

	* s-oscons-tmplt.c (NAME_MAX): Fix definition for Solaris
	(FILENAME_MAX): Remove unneeded definition.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb, debug.adb: Update comments.

2014-07-18  Vincent Celier  <celier@adacore.com>

	* par-ch4.adb (Simple_Expression): Add missing style check
	for binary adding operators.
	(Term): Add missing style check for multiplying operators.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* impunit.adb: Minor comment correction.
	* widechar.adb, s-wchcon.ads: Minor comment corrections.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb (Build_Discrete_Static_Predicate): New name
	for Build_Static_Predicate (Build_Predicate_Functions):
	Don't try to build discrete predicate for real type.
	(Build_Predicate_Functions): Report attempt to use
	Static_Predicate function on real type as unimplemented.
	* sem_util.adb (Check_Expression_Against_Static_Predicate):
	Add guard to prevent blow up on predicate for real type.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* einfo.adb (Set_Static_Predicate): Simplify assertion to handle
	properly static predicate on enumeration types and modular types
	(not subtypes).

2014-07-18  Pierre-Marie Derodat  <derodat@adacore.com>

	* scos.ads (SCO_Unit_Table_Entry): Add a field to keep track of
	the corresponding source file index.
	* get_scos.ads (Get_SCOs): Add a default value for it.
	* par_sco.adb (SCO_Record): Fill the corresponding value.
	* scos.h: New.

2014-07-18  Vincent Celier  <celier@adacore.com>

	* a-strunb-shared.adb, s-auxdec.ads, s-rannum.adb, atree.ads,
	urealp.adb, vms_data.ads, lib.ads, s-auxdec-vms_64.ads: Minor
	reformatting.
	* gnat_ugn.texi: Add documentation for new gnatmem switch -t.

2014-07-18  Thomas Quinot  <quinot@adacore.com>

	* g-sercom.ads (Set): document possible data loss.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* exp_attr.adb (Expand_N_Attribute_Reference, cases Input,
	Output, Read, Write): If the restriction No_Streams is active,
	replace each occurrence of a stream attribute by an explicit
	Raise statement.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* par_sco.adb, a-reatim.ads, exp_attr.adb, sem_util.adb: Minor
	reformatting.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* einfo.ads, einfo.adb (Has_Out_Or_In_Out_Parameter): New flag and
	function.
	(Set_Has_Out_Or_In_Out_Parameter): New procedure.
	* sem_ch6.adb (Set_Formal_Mode): Set Has_Out_Or_In_Out_Parameter flag.
	* sem_res.adb (Resolve_Call): Error if call of Ada 2012 function
	with OUT or IN OUT from earlier Ada mode (e.g. Ada 2005)

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* bcheck.adb (Check_Consistent_Restrictions):
	Remove obsolete code checking for violation of
	No_Standard_Allocators_After_Elaboration (main program)
	* bindgen.adb (Gen_Adainit): Handle
	No_Standard_Allocators_After_Elaboration
	(Gen_Output_File_Ada): ditto.
	* exp_ch4.adb (Expand_N_Allocator): Handle
	No_Standard_Allocators_After_Elaboration.
	* Makefile.rtl: Add entry for s-elaall
	* rtsfind.ads: Add entry for Check_Standard_Allocator.
	* s-elaall.ads, s-elaall.adb: New files.
	* sem_ch4.adb (Analyze_Allocator): Handle
	No_Standard_Allocators_After_Elaboration.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* lib.adb, lib.ads, lib-writ.adb, lib-writ.ads, ali.adb,
	ali.ads, lib-load.adb: Remove Lib.Has_Allocator and all uses.
	Remove AB parameter from ali files and all uses.
	Remove Allocator_In_Body and all uses.

2014-07-18  Robert Dewar  <dewar@adacore.com>

	* g-expect-vms.adb: Add comment.

2014-07-18  Thomas Quinot  <quinot@adacore.com>

	* par_sco.adb (Is_Logical_Operation): return True for
	N_If_Expression.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Resolve_Attribute, case 'Update): Do full
	analysis and resolution of each choice in the associations within
	the argument of Update, because they may be variable names.

2014-07-18  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_attr.adb (Expand_Loop_Entry_Attribute): Insert any condition
	actions before the generated if statement.

2014-07-18  Hristian Kirtchev  <kirtchev@adacore.com>

	* gnat_ugn.texi Enhance the documentation of
	switches -gnateA and -gnateV.

2014-07-18  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb (Build_Default_Subtype): Add missing condition
	so that code matches description: use the full view of the base
	only if the base is private and the subtype is not.

2014-07-17  Gary Dismukes  <dismukes@adacore.com>

	* exp_disp.adb: Minor reformatting.
	* exp_disp.adb: Minor code reorganization.

2014-07-17  Thomas Quinot  <quinot@adacore.com>

	* gnat_rm.texi, freeze.adb (Check_Component_Storage_Order): Do not
	require an explicit SSO attribute definition clause on a composite type
	just because one of its components has one.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* sem_attr.adb (Analyze_Attribute, case Loop_Entry): Rewrite
	attribute out of existence if the enclosing pragma is ignored.
	* sem_util.adb: Minor reformatting.

2014-07-17  Ed Schonberg  <schonberg@adacore.com>

	* exp_aggr.adb (Expand_Array_Aggregate): Handle properly an
	array aggregate expanded into assignments when it appears as a
	local declaration in an inlined body.

2014-07-17  Doug Rupp  <rupp@adacore.com>

	* init.c [__ANDROID__]: Modify for ZCX.
	* exp_aggr.adb: Minor reformatting
	* sigtramp-armvxw.c, sigtramp-ppcvxw.c: Update comments.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* a-strunb-shared.ads, a-stwiun-shared.ads, a-stzunb-shared.ads,
	exp_ch7.adb, g-pehage.ads, g-socket.ads, gnat_ugn.texi, gnat_ugx.texi,
	scng.adb: Remove incorrect usage "allow to" and "allows to".

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* exp_dist.adb: Minor reformatting.

2014-07-17  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Improve documentation of Unrestricted_Access.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb (Build_Invariant_Procedure): Add variable Nam
	(Add_Invariants): Set Nam to Name_Type_Invariant if from aspect.

2014-07-17  Thomas Quinot  <quinot@adacore.com>

	* exp_pakd.adb (Create_Packed_Array_Type.Install_PAT): For a
	non-bit-packed array, propagate Reverse_Storage_Order to the
	packed array type.

2014-07-17  Javier Miranda  <miranda@adacore.com>

	* exp_disp.adb: Fix comment.
	* exp_pakd.adb: Minor reformatting.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* bindgen.adb (Gen_Elab_Calls): Skip reference to elab
	entity if none exists (Gen_Elab_Calls): Complain if clash with
	No_Multiple_Elaboration.
	* s-rident.ads, restrict.ads: Add restriction No_Multiple_Elaboration.
	* sem_util.adb (Build_Elaboration_Entity): Skip building entity
	if not needed.
	* gnat_rm.texi: Document restriction No_Multiple_Elaboration.
	* sem_ch4.adb: Minor comment updates.

2014-07-17  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch9.adb (Buid_Protected_Subprogram_Call): Preserve type
	of function call for later use when shared passive objects
	are involved.

2014-07-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* par-ch13.adb (Get_Aspect_Specifications):
	Catch a case where the argument of SPARK aspect Refined_State
	is not properly parenthesized.

2014-07-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch6.adb (Expand_Ctrl_Function_Call): Do not extend
	the lifetime of a reference to an Ada 2012 container element.
	(Is_Element_Reference): New routine.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* ali.ads: Minor comment fix.
	* lib-writ.adb: Minor reformatting.

2014-07-17  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch10.adb (Analyze_Proper_Body): When analyzing a subunit
	in ASIS mode, load another subunit only if it a subunit of the
	current one, not a sibling that has been reached through the
	analysis of an ancestor. This allows the construction of the
	ASIS tree for the subunit even when sibling subunits have errors.

2014-07-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Analyze_Declarations): Remove the guard which
	prevents the analysis of various contracts when the associated
	construct is erroneous.
	* sem_util.adb (Save_SPARK_Mode_And_Set): Do not query the
	SPARK_Pragma of an illegal or a partially decorated construct.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* s-imguns.ads: Minor reformatting.

2014-07-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch7.adb (Build_Finalization_Master): Move all local
	variables to the proper code section. When looking for an existing
	finalization master, inspect the ultimate ancestor type of the
	full view.
	* sem_util.ads, sem_util.adb (Root_Type_Of_Full_View): New routine.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* aspects.ads, aspects.adb: Add entries for aspect Annotate.
	* gnat_rm.texi: Document Entity argument for pragma Annotate and
	Annotate aspect.
	* sem_ch13.adb (Analyze_Aspect_Specification): Add processing
	for Annotate aspect.
	* sem_prag.adb (Analyze_Pragma, case Annotate): Allow optional
	Entity argument at end.
	* sinfo.ads (N_Aspect_Specification): Add note on Annotate aspect.

2014-07-17  Tristan Gingold  <gingold@adacore.com>

	* s-imguns.ads: Fix minor typo.

2014-07-17  Thomas Quinot  <quinot@adacore.com>

	* sprint.adb: Minor reformatting.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* sprint.adb (Write_Itype): Print proper header for string
	literal subtype.

2014-07-17  Steve Baird  <baird@adacore.com>

	* sinfo.ads, sem_scil.ads: Improve comments, minor reformatting.

2014-07-17  Vincent Celier  <celier@adacore.com>

	* gnatbind.adb: Change in message "try ... for more information".

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* sprint.adb: Code clean up.

2014-07-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch7.adb (Find_Last_Init): Relocate local variables to
	the relevant code section. Add new local constant Obj_Id. When
	a limited controlled object is initialized by a function call,
	the build-in-place object access function call acts as the last
	initialization statement.
	* exp_util.adb (Is_Object_Access_BIP_Func_Call): New routine.
	(Is_Secondary_Stack_BIP_Func_Call): Code reformatting.
	* exp_util.ads (Is_Object_Access_BIP_Func_Call): New routine.

2014-07-17  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch8.adb (Analyze_Generic_Renaming): For generic subprograms,
	propagate intrinsic flag to renamed entity, to allow e.g. renaming
	of Unchecked_Conversion.
	* sem_ch3.adb (Analyze_Declarations): Do not analyze contracts
	if the declaration has errors.

2014-07-17  Ed Schonberg  <schonberg@adacore.com>

	* a-rbtgbk.adb: a-rbtgbk.adb (Generic_Insert_Post): Check whether
	container is busy before checking whether capacity allows for
	a further insertion. Insertion in a busy container that is full
	raises Program_Error rather than Capacity_Error. Previous to that
	patch which exception was raised varied among container types.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* g-comlin.ads, g-comlin.adb: Minor clean up.

2014-07-17  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Update gnatpp doc.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document new restriction No_Long_Long_Integers.
	* exp_ch4.adb (Make_Array_Comparison_Op): Add note that we
	could do this by actually expanding a real generic.
	* a-tags.ads: Add comments about performance.
	* sprint.adb (Sprint_Node_Actual, case N_Object_Declaration):
	Print Etype of defining identifier, rather than the object
	definition. More information.

2014-07-17  Thomas Quinot  <quinot@adacore.com>

	* exp_dist.adb: Minor documentation clarification.

2014-07-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_util.adb (Is_Aliased): Revert previous change.

2014-07-17  Vincent Celier  <celier@adacore.com>

	* g-comlin.adb (Try_Help): New procedure.
	(Getopt): Use new procedure Try_Help.
	* g-comlin.ads (Try_Help): New procedure.

2014-07-17  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Minor update.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Improve documentation of Unrestricted_Access.
	* sinfo.ads: Document restriction on aggregates (must expand to
	assignments if one or more assignments needs expansion, e.g. for
	controlled types).
	* sem_ch13.adb: All warning messages regarding bit order should
	be info: messages.
	* gnat_ugn.texi: Minor correction of missing @ on @code

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* restrict.ads (Implementation_Restriction): Add No_Long_Long_Integer.
	* s-rident.ads (Partition_Boolean_Restrictions): Add
	No_Long_Long_Integer.
	* sem_ch3.adb (Modular_Type_Declaration): Size must be <=
	Long_Integer'Size if restriction No_Long_Long_Integer is active.
	(Signed_Integer_Type_Declaration): Do not allow Long_Long_Integer
	as the implicit base type for a signed integer type declaration
	if restriction No_Long_Long_Integer is active.
	* sem_util.ads, sem_util.adb (Set_Entity_With_Checks): Include check for
	No_Long_Long_Integer.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, a-ztexio.ads, exp_imgv.adb, casing.adb, casing.ads,
	einfo.ads, checks.adb, sem_ch12.adb, a-textio.ads, freeze.adb,
	repinfo.adb, exp_ch6.adb, sem_ch4.adb, a-witeio.ads, sem_ch8.adb,
	sem_warn.adb, exp_aggr.adb, exp_dist.adb, par-tchk.adb, s-fatgen.adb,
	treepr.adb, lib-xref.adb: Remove the word kludge from ada sources.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Remove -gnatdQ.
	* exp_disp.adb: Remove -gnatdQ.
	* a-ztenio.ads, a-wtinio.ads, a-wtmoio.ads, a-ztcoau.ads, a-tiinio.ads,
	a-wtfiio.ads, a-timoio.ads, sem_ch12.adb, a-tifiio.ads, a-ztinio.ads,
	rtsfind.adb, rtsfind.ads, a-ztmoio.ads, a-wtdeio.ads, a-ztfiio.ads,
	a-tideio.ads, a-wtflio.ads, a-ztdeio.ads, sem_ch8.adb, a-tiflio.ads,
	sprint.adb, a-ztflio.ads, snames.ads-tmpl, a-wtenio.ads,
	a-tienio.ads: Rename Text_IO_Kludge to Text_IO_Special_Unit.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* back_end.adb: Minor reformatting and comment additions.
	* checks.ads, checks.adb (Duplicated_Tag_Checks_Suppressed): New
	function.
	* exp_disp.adb (Make_DT): Use Duplicated_Tag_Checks_Suppressed.
	(Make_VM_TSD): Use Duplicated_Tag_Checks_Suppressed.
	* gnat_rm.texi: Document new check Duplicated_Tag_Checks_Suppressed.
	* gnat_ugn.texi: Additional documentation for Duplicated_Tag_Check.
	* snames.ads-tmpl (Duplicated_Tag_Checks_Suppressed): New check.
	* types.ads (Duplicated_Tag_Checks_Suppressed): New check.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Minor comment updates.

2014-07-17  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb (Make_Explicit_Dereference): If the expression
	being dereferenced is a generalized indexing, reset the overloaded
	flag on the generalized indexing call, consistent with the
	resetting of the flag on the original indexed component.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Document advise not to mix -gnatV? and
	optimization.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* checks.adb (Insert_Valid_Check): Don't insist on a name
	for the prefix when we make calls to Force_Evaluation and
	Duplicate_Subexpr_No_Checks.
	* exp_util.adb (Is_Volatile_Reference): Handle all cases properly
	(Remove_Side_Effects): Handle all volatile references right
	(Side_Effect_Free): Volatile reference is never side effect free
	* sinfo.ads (N_Attribute_Reference): Add comments explaining
	that in the tree, the prefix can be a general expression.

2014-07-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Contract,
	Analyze_Subprogram_Contract): Add comments on SPARK_Mode save/restore.
	* sem_ch7.adb (Analyze_Package_Body_Contract,
	Analyze_Package_Contract): Add comments on SPARK_Mode save/restore.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* exp_ch7.ads, exp_util.ads: Document Insert_Action_After,
	Store_After_Actions_In_Scope.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* sem_aux.ads: Minor comment addition.

2014-07-17  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Make_Call_Into_Operator): If the call is already
	a rewriting of an operator node, there are no actuals to be
	propagated from original node to rewritten node when in ASIS mode.

2014-07-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Contract,
	Analyze_Subprogram_Contract): Add new local variable Mode. Save
	and restore the SPARK mode of the related construct in a
	stack-like fashion.
	* sem_ch7.adb (Analyze_Package_Body_Contract,
	Analyze_Package_Contract): Add new local variable Mode. Save and
	restore the SPARK mode of the related construct in a stack-like fashion.
	* sem_util.adb Remove with and use clause for Opt.
	(Restore_SPARK_Mode): New routine.
	(Save_SPARK_Mode_And_Set): New routine.
	* sem_util.ads Add with and use clause for Opt.
	(Restore_SPARK_Mode): New routine.
	(Save_SPARK_Mode_And_Set): New routine.

2014-07-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_util.adb (Is_Aliased): Transient objects
	within an expression with actions cannot be considered aliased.

2014-07-17  Thomas Quinot  <quinot@adacore.com>

	* sem.ads (Scope_Stack_Entry): Reorganize storage of action lists;
	introduce a new list (cleanup actions) for each (transient) scope.
	* sinfo.ads, sinfo.adb (Cleanup_Actions): New attribute for
	N_Block_Statement
	* exp_ch7.ads (Store_Cleanup_Actions_In_Scope): New subprogram.
	* exp_ch7.adb (Store_Actions_In_Scope): New subprogram, common
	processing for Store_xxx_Actions_In_Scope.
	(Build_Cleanup_Statements): Allow for a list of additional
	cleanup statements to be passed by the caller.
	(Expand_Cleanup_Actions): Take custom cleanup actions associated
	with an N_Block_Statement into account.
	(Insert_Actions_In_Scope_Around): Account for Scope_Stack_Entry
	reorganization (refactoring only, no behaviour change).
	(Make_Transient_Block): Add assertion to ensure that the current
	scope is indeed a block (namely, the entity for the transient
	block being constructed syntactically, which has already been
	established as a scope).  If cleanup actions are present in the
	transient scope, transfer them now to the transient block.
	* exp_ch6.adb (Expand_Protected_Subprogram_Call): Freeze the
	called function while it is still present as the name in a call
	in the tree. This may not be the case later on if the call is
	rewritten into a transient block.
	* exp_smem.adb (Add_Shared_Var_Lock_Procs): The post-actions
	inserted after calling a protected operation on a shared passive
	protected must be performed in a block finalizer, not just
	inserted in the tree, so that they are executed even in case of
	a normal (RETURN) or abnormal (exception) transfer of control
	outside of the current scope.
	* exp_smem.ads (Add_Shared_Var_Lock_Procs): Update documentation
	* sem_ch8.adb, expander.adb, exp_ch11.adb: Adjust for
	Scope_Stack_Entry reorganization.

2014-07-17  Thomas Quinot  <quinot@adacore.com>

	* exp_disp.adb (Make_DT, Make_VM_TSD): Do not omit Check_TSD
	call for types that do not have an explicit attribute definition
	clause for External_Tag, as their default tag may clash with an
	explicit tag defined for some other type.

2014-07-17  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_util.adb (Is_Controlled_Function_Call): Recognize a
	controlled function call with multiple actual parameters that
	appears in Object.Operation form.

2014-07-17  Thomas Quinot  <quinot@adacore.com>

	* einfo.ads, einfo.adb (Has_External_Tag_Rep_Clause): Remove
	entity flag.
	* sem_ch13.adb (Analyze_Attribute_Definition_Clause, case
	External_Tag): No need to set entity flag.
	* sem_aux.ads, sem_aux.adb (Has_External_Tag_Rep_Clause):
	Reimplement correctly in terms of Has_Rep_Item.

2014-07-17  Thomas Quinot  <quinot@adacore.com>

	* exp_ch7.adb (Establish_Transient_Scope.Find_Node_To_Be_Wrapped):
	Start examining the tree at the node passed to
	Establish_Transient_Scope (not its parent).
	* exp_ch6.adb (Make_Build_In_Place_Call_In_Object_Declaration):
	The access type for the variable storing the reference to
	the call must be declared and frozen prior to establishing a
	transient scope.
	* exp_ch9.adb: Minor reformatting.

2014-07-17  Pascal Obry  <obry@adacore.com>

	* s-os_lib.ads: Minor comment update.

2014-07-17  Tristan Gingold  <gingold@adacore.com>

	* sysdep.c: Add ATTRIBUTE_UNUSED to avoid warnings.  Fix some
	indentation.
	* socket.c: Remove #warning to avoid warning.
	* expect.c: Indent some preprocessor directives to clarify
	nested if.  Do not use wait.h on PikeOS.  Add ATTRIBUTE_UNUSED
	to remove warnings.
	* env.c: Fix indentation.  Port to PikeOS.
	* gsocket.h: Port to PikeOS.  Remove #warning.
	* terminals.c: Port to PikeOS.	Fix indentation of the stubs.
	Add ATTRIBUTE_UNUSED to stubs arguments.  Fix return statement
	of stubbed __gnat_setup_parent_communication.
	* adaint.c: Port to PikeOS.  Reindent some preprocessor
	directives to clarify nested if.  Fix indentation.  Add missing
	ATTRIBUTE_UNUSED.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* sem_attr.adb: Minor reformatting.

2014-07-17  Robert Dewar  <dewar@adacore.com>

	* exp_ch7.adb, exp_ch7.ads, sinfo.ads: Minor reformatting.

2014-07-17  Ed Schonberg  <schonberg@adacore.com>

	* sem_case.adb (Check_Choice_Set): If the case expression is the
	expression in a predicate, do not recheck coverage against itself,
	to prevent spurious errors.
	* sem_ch13.adb (Check_Aspect_At_End_Of_Declarations): Indicate that
	expression comes from an aspect specification, to prevent spurious
	errors when expression is a case expression in a predicate.

2014-07-17  Pascal Obry  <obry@adacore.com>

	* adaint.c, adaint.h (__gnat_set_executable): Add mode parameter.
	* s-os_lib.ads, s-os_lib.adb (Set_Executable): Add Mode parameter.

2014-07-17  Vincent Celier  <celier@adacore.com>

	* gnatchop.adb, make.adb, gnatbind.adb, clean.adb, gprep.adb,
	gnatxref.adb, gnatls.adb, gnatfind.adb, gnatname.adb: Do not output
	the usage for an erroneous invocation of a gnat tool.

2014-07-16  Vincent Celier  <celier@adacore.com>

	* gnatls.adb: Get the target parameters only if -nostdinc was
	not specified.

2014-07-16  Ed Schonberg  <schonberg@adacore.com>

	* checks.adb (Insert_Valid_Check): If the expression is a packed
	component of a modular type of the right size the data is always
	valid. This os particularly useful if the component is part of
	a volatile variable.

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi, sinfo.ads, freeze.adb, exp_aggr.adb: Minor reformatting

2014-07-16  Thomas Quinot  <quinot@adacore.com>

	* exp_ch7.ads: Minor documentation fix.

2014-07-16  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Find_Type_Name): Diagnose properly
	a private extension completion that is an interface definition
	with an interface list.

2014-07-16  Arnaud Charlet  <charlet@adacore.com>

	* gnatls.adb (Gnatls): Code clean ups.

2014-07-16  Thomas Quinot  <quinot@adacore.com>

	* sinfo.ads, sinfo.adb (N_Compound_Statement): New node kind.
	* sem.adb (Analyze): Handle N_Compound_Statement.
	* sprint.adb (Sprint_Node_Actual): Ditto.
	* sem_ch5.ads, sem_ch5.adb (Analyze_Compound_Statement): New
	procedure to handle N_Compound_Statement.
	* exp_aggr.adb (Collect_Initialization_Statements):
	Use a proper compound statement node, instead of a bogus
	expression-with-actions with a NULL statement as its expression,
	to wrap collected initialization statements.
	* freeze.ads, freeze.adb
	(Explode_Initialization_Compound_Statement): New public procedure,
	lifted from Freeze_Entity.
	(Freeze_Entity): When freezing
	an object with captured initialization statements and without
	delayed freezing, explode compount statement.
	* sem_ch4.adb (Analyze_Expression_With_Actions): Remove special
	case that used to handle bogus EWAs with NULL statement as
	the expression.
	* exp_ch13.adb (Expand_N_Freeze_Entity): For an object with
	delayed freezing and captured initialization statements, explode
	compound statement.

2014-07-16  Gary Dismukes  <dismukes@adacore.com>

	* g-rewdat.adb, g-rewdat.ads: Minor reformatting.

2014-07-16  Doug Rupp  <rupp@adacore.com>

	* s-interr-hwint.adb: Casing error on parameter.

2014-07-16  Pascal Obry  <obry@adacore.com>

	* Makefile.rtl: Add g-rewdat.o dependencies in
	GNATRTL_NONTASKING_OBJS.

2014-07-16  Ed Schonberg  <schonberg@adacore.com>

	* sem_case.adb: Code clean up.

2014-07-16  Vincent Celier  <celier@adacore.com>

	* make.adb: Do not read gnat.adc when gnatmake is invoked
	with -gnatA.

2014-07-16  Pascal Obry  <obry@adacore.com>

	* gnat_rm.texi, impunit.adb, g-rewdat.adb, g-rewdat.ads: Initial
	implementation of GNAT.Rewrite_Data.

2014-07-16  Vincent Celier  <celier@adacore.com>

	* gnatls.adb (Normalize): New function.
	(Gnatls): Get the target parameters. On targets other than VMS,
	normalize the path names in the source search path, the object search
	path and the project search path.

2014-07-16  Ed Schonberg  <schonberg@adacore.com>

	* sem_case.adb: Avoid self-checking of case expressions in
	dynamic predicates.

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document effect of Suppress_Initialization on tags and
	discriminants.

2014-07-16  Eric Botcazou  <ebotcazou@adacore.com>

	* switch-b.adb (Scan_Binder_Switches): Add missing guard.

2014-07-16  Ben Brosgol  <brosgol@adacore.com>

	* gnat_ugn.texi: Fix typo.

2014-07-16  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch4.adb (Expand_N_Case_Expression): Do not expand case
	expression if it is the specification of a subtype predicate:
	it will be expanded when the return statement is analyzed, or
	when a static predicate is transformed into a static expression
	for evaluation by the front-end.
	* sem_ch13.adb (Get_RList): If the expression for a static
	predicate is a case expression, extract the alternatives of the
	branches with a True value to create the required statically
	evaluable expression.

2014-07-16  Thomas Quinot  <quinot@adacore.com>

	* exp_prag.adb (Expand_Pragma_Check): Use the location of the
	expression, not the location of the aspect, for all generated
	code, so that in particular the call to raise_assert_failure
	gets the sloc of the associated condition.
	* exp_ch6.adb
	(Expand_Subprogram_Contract.Build_Postconditions_Procedure):
	Set an explicit End_Label on the handled sequence of statements
	for the _Postconditions procedure so that the implicit return
	statement does not erroneously get associated with code generated
	for the last condition in postconditions.

2014-07-16  Thomas Quinot  <quinot@adacore.com>

	* ug_words: Fix name of VMS synonym for -gnatw.z (SIZE_ALIGNMENT,
	not SIZE_ALIGN) and -gnatw.Z (NOSIZE_ALIGNMENT, not NOSIZE_ALIGN).
	* vms_data.ads: Add missing spaces in VMS synonyms for -gnatw.z /
	-gnatw.Z.

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, sem_prag.adb, sem_util.adb, sem_res.adb, sem_ch13.adb:
	Minor code reorganization (use Is_Access_Type, not in Access_Kind).
	* exp_ch3.adb: Minor code reorganization, use Is_Access_Type,
	not in Access_Kind.
	* par-ch4.adb (At_Start_Of_Attribute): New function
	(P_Simple_Expression): Better msg for bad attribute prefix.
	* scans.ads: Minor reformatting.

2014-07-16  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Resolve_Attribute, case 'Update): If choice is a
	static constant, check that in belongs to the corresponding index
	subtype, to produce the proer warning when expansion is disabled.

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* freeze.adb (Freeze_Entity): Warn on incompatible size/alignment.
	* gnat_ugn.texi: Document -gnatw.z and -gnatw.Z.
	* ug_words: VMS synonyms (WARNINGS=[NO]SIZE_ALIGN) for -gnatw.z/-gnatw.Z
	* usage.adb: Add lines for -gnatw.z/-gnatw.Z.
	* vms_data.ads: VMS synonyms (WARNINGS=[NO]SIZE_ALIGN) for
	-gnatw.z/-gnatw.Z
	* warnsw.adb: Set Warn_On_Size_Alignment appropriately.
	* warnsw.ads (Warn_On_Size_Alignment): New flag Minor
	reformatting.

2014-07-16  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch7.adb (Process_Declarations): Reinstate the check on
	a hook object to ensure that the related transient declaration
	is finalizable.
	* exp_util.adb (Is_Aliased): Do not consider expresison with
	actions as a special context.
	(Requires_Cleanup_Actions): Reinstate the check on a hook object to
	ensure that the related transient declaration is finalizable.

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* checks.ads, checks.adb (Allocation_Checks_Suppressed): New function.
	* snames.ads-tmpl: Add Allocation_Check to list of check names.
	* types.ads: Add Allocation_Check to list of check names.

2014-07-16  Thomas Quinot  <quinot@adacore.com>

	* sem_util.adb (Enter_Name): replace bogus test for presence of
	Corresponding_Remote_Type with correct test on Ekind.
	* sem_res.adb (Valid_Conversion): ditto; also clarify validity
	of calls to Corresponding_ Remote_Type (documentation fix).

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document illegal case of Unrestricted_Access.
	* sem_attr.adb (Analyze_Access_Attribute): Set_Non_Aliased_Prefix
	where it applies.
	(Resolve_Attribute, case Access): Flag illegal Unrestricted_Access use.
	* sinfo.ads, sinfo.adb (Non_Aliased_Prefix): New flag.

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Document binder switch -Ra.
	* gnatbind.adb (List_Closure_Display): Implement -Ra switch
	(List_Closure_All).
	* opt.ads (List_Closure_All): New switch.
	* switch-b.adb (Scan_Binder_Switches): Recognize -Ra to set
	List_Closure_All.

2014-07-16  Ben Brosgol  <brosgol@adacore.com>

	* gnat_rm.texi: Minor edits, to make case consistent in names
	of types and fields.

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document erroneous mixing of thin pointers and
	unrestricted access
	* gnat_ugn.texi: Add note on size of access types about thin
	pointers and the use of attribute Unrestricted_Access.

2014-07-16  Ed Schonberg  <schonberg@adacore.com>

	* a-cbdlli.ads, a-cbdlli.adb, a-cbhama.ads, a-cbhama.adb,
	* a-cbhase.ads, a-cbhase.adb, a-cborma.ads, a-cborma.adb,
	* a-cborse.ads, a-cborse.adb, a-cobove.ads a-cobove.adb: Add Control
	machinery to detect tampering on bounded vectors.

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document that leading/trailing asterisks are
	now implied for the pattern match string for pragma Warnings
	and Warning_As_Error.
	* sem_prag.adb (Acquire_Warning_Match_String): New procedure.
	(Analyze_Pragma, case Warning_As_Error): Call
	Acquire_Warning_Match_String.
	(Analyze_Pragma, case Warnings): Call Acquire_Warning_Match_String.

2014-07-16  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Document need for project file
	for --incremental switch for gnat2xml.

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Fix example of non-packable components in packed
	records section.

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* s-tpoben.adb, s-tasren.adb, s-interr.adb, s-interr-hwint.adb,
	s-shasto.adb, s-interr-vms.adb, s-interr-sigaction.adb: Avoid use of
	upper case in exception messages.

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* snames.ads-tmpl, sem_attr.adb, exp_attr.adb: Same_Storage attribute
	is renamed Has_Same_Storage.
	* gnat_rm.texi: Document missing SPARK pragmas and attributes.
	* sem_prag.adb: Minor comment fix (use LOCAL_NAME in syntax
	descriptions).

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* exp_util.adb, sem_attr.adb, exp_ch4.adb, a-cohase.ads,
	a-coinho-shared.adb, a-coinho-shared.ads: Minor reformatting.

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Add note that integrated
	preprocessing cannot be applied to configuration pragma files.

2014-07-16  Yannick Moy  <moy@adacore.com>

	* sem_attr.adb (Analyze_Attribute/cases Pred
	and Succ): Always enable range check on fixed-point types if
	not suppressed for the type.

2014-07-16  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_util.adb (State_Has_Enabled_Property):
	Account for an external property denoted by an others choice.

2014-07-16  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.ads, exp_ch4.adb (Find_Hook_Context): Relocated to Exp_Util.
	* exp_ch7.adb (Process_Declarations): There is no need to check
	that a transient object being hooked is controlled as it would
	not have been hooked in the first place.
	* exp_ch9.adb Remove with and use clause for Exp_Ch4.
	* exp_util.adb (Find_Hook_Context): Relocated from Exp_Ch4.
	(Is_Aliased): A renaming of a transient controlled object is
	not considered aliasing when it occurs within an expression
	with actions.
	(Requires_Cleanup_Actions): There is no need to
	check that a transient object being hooked is controlled as it
	would not have been hooked in the first place.
	* exp_util.ads (Find_Hook_Context): Relocated from Exp_Ch4.

2014-07-16  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch13.adb (Insert_After_SPARK_Mode): Moved to
	the outer level of routine Analyze_Aspect_Specifications. Ensure
	that the corresponding pragmas of aspects Initial_Condition and
	Initializes are inserted after pragma SPARK_Mode.

2014-07-16  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Analyze_Attribute, case 'Update): Handle
	properly a choice list with more than one choice, where each
	is an aggregate denoting a sequence of array indices for a
	multidimentional array. For SPARK use.

2014-07-16  Vadim Godunko  <godunko@adacore.com>

	* a-coinho-shared.adb (Adjust): Create
	copy of internal shared object and element when source container
	is locked.
	(Copy): Likewise.
	(Query_Element): Likewise.
	(Update_Element): Likewise.
	(Constant_Reference): Likewise. Raise Constraint_Error on attempt
	to get reference for empty holder.
	(Reference): Likewise.

2014-07-16  Thomas Quinot  <quinot@adacore.com>

	* exp_ch4.adb (Find_Hook_Context): New subprogram, extracted
	from Process_Transient_Oject.
	* exp_ch4.ads: Ditto.
	* exp_ch9.adb (Build_Class_Wide_Master): Insert the _master
	declaration as an action on the topmost enclosing expression,
	not on a possibly conditional subexpreession.

2014-07-16  Vadim Godunko  <godunko@adacore.com>

	* a-coinho.adb, a-coinho-shared.adb, a-coinho.ads, a-coinho-shared.ads:
	Fix parameter mode of Update_Element.

2014-07-16  Robert Dewar  <dewar@adacore.com>

	* a-coinho.adb, a-coinho-shared.adb, a-coinho-shared.ads: Minor
	reformatting.

2014-07-16  Ed Schonberg  <schonberg@adacore.com>

	* a-cohase.ads: Type Iterator must be controlled, so that the
	tampering bit is properly set through an iteration.
	* a-cohase.adb: Add Finalize operation for type Iterator.

2014-07-16  Ed Schonberg  <schonberg@adacore.com>

	* a-coinho-shared.adb, a-coinho-shared.ads: Proper structures for
	tampering checks.

2014-07-16  Ed Schonberg  <schonberg@adacore.com>

	* a-coinho-shared.adb: Fix spurious accessibility check.

2014-06-15  Jan Hubicka  <hubicka@ucw.cz>

	* gcc-interface/utils.c (process_attributes): Use set_decl_tls_model.

2014-06-14  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	PR ada/61505
	* gnat_rm.texi: Fix errors with makeinfo 5.1.

2014-06-14  Arnaud Charlet  <charlet@adacore.com>

	PR ada/61505
	* gnat_rm.texi: Attempt to fix error with makeinfo 5.1.

2014-06-13  Yannick Moy  <moy@adacore.com>

	* exp_attr.adb: Fix typo in comment.
	* gnat1drv.adb (Adjust_Global_Switches): Force float overflow
	checking in GNATprove_Mode.

2014-06-13  Ed Schonberg  <schonberg@adacore.com>

	* a-coinho-shared.adb, a-coinho-shared.ads: Update shared version.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, sem_ch9.adb, a-coinho.adb, a-coinho.ads: Minor
	reformatting.

2014-06-13  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Add local
	variable Missing_Parentheses. Emit an error when a state
	declaration with options appears without parentheses. Add a
	guard to prevent a bogus error when a state declaration may be
	interpreted as an option if a previous declaration with options
	was not parenthesized.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* checks.adb: Validate_Alignment_Check_Warnings: New procedure
	(Apply_Address_Clause_Check): Make Aligment_Warnings table entry.
	* checks.ads (Alignment_Warnings_Record): New type.
	(Alignment_Warnings): New table
	(Validate_Alignment_Check_Warnings): New procedure.
	* errout.adb (Delete_Warning_And_Continuations): New procedure
	(Error_Msg_Internal): Set Warning_Msg (Delete_Warning): Handle
	Warnings_Treated_As_Errors (Finalize): Minor reformatting
	* errout.ads (Warning_Msg): New variable
	(Delete_Warning_And_Continuations): New procedure
	* erroutc.adb (Delete_Msg): Handle Warnings_Treated_As_Errors count.
	* gnat1drv.adb (Post_Compilation_Validation_Checks): New procedure.

2014-06-13  Ed Schonberg  <schonberg@adacore.com>

	* a-coinho.adb, a-coinho.ads: Add Reference machinery.

2014-06-13  Hristian Kirtchev  <kirtchev@adacore.com>

	* errout.adb (SPARK_Msg_N): New routine.
	(SPARK_Msg_NE): New routine.
	* errout.ads Add a section on SPARK-related error routines.
	(SPARK_Msg_N): New routine.
	(SPARK_Msg_NE): New routine.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Ensure that
	pragma Abstract_State is always inserted after SPARK_Mode.
	(Insert_After_SPARK_Mode): New routine.
	* sem_prag.adb (Analyze_Abstract_State,
	Analyze_Constituent, Analyze_External_Property,
	Analyze_External_Property_In_Decl_Part, Analyze_Global_Item,
	Analyze_Global_List, Analyze_Initialization_Item,
	Analyze_Initialization_Item_With_Inputs, Analyze_Input_Item,
	Analyze_Input_List, Analyze_Input_Output, Analyze_Part_Of,
	Analyze_Pragma, Analyze_Refined_Depends_In_Decl_Part,
	Analyze_Refined_Global_In_Decl_Part,
	Analyze_Refined_State_In_Decl_Part, Analyze_Refinement_Clause,
	Check_Aspect_Specification_Order, Check_Constituent_Usage,
	Check_Declaration_Order, Check_Dependency_Clause,
	Check_Duplicate_Mode, Check_Duplicate_Option,
	Check_Duplicate_Property, Check_External_Properties,
	Check_External_Property, Check_Function_Return,
	Check_Matching_Constituent, Check_Matching_State,
	Check_Mode_Restriction_In_Enclosing_Context,
	Check_Mode_Restriction_In_Function, Check_Refined_Global_Item,
	Check_State_And_Constituent_Use, Create_Or_Modify_Clause,
	Has_Extra_Parentheses, Inconsistent_Mode_Error,
	Match_Error, Propagate_Part_Of, Report_Extra_Clauses,
	Report_Extra_Constituents_In_List, Report_Extra_Inputs,
	Report_Unrefined_States, Report_Unused_Constituents,
	Report_Unused_States, Role_Error, Usage_Error):
	Convert Error_Msg_XXX calls to SPARK_Msg_XXX calls
	to report semantic errors only when SPARK_Mode is on.
	(Analyze_Depends_In_Decl_Part): Do not check the syntax of
	pragma Depends explicitly, this is now done by the analysis.
	(Analyze_Global_In_Decl_List): Do not check the syntax of
	pragma Global explicitly, this is now done by the analysis.
	(Analyze_Initializes_In_Decl_Part): Do not check the syntax of
	pragma Initializes explicitly, this is now done by the analysis.
	(Analyze_Part_Of): Do not check the syntax of the encapsulating
	state, this is now done by the analysis.
	(Analyze_Pragma): Do
	not check the syntax of a state declaration, this is now done
	by the analysis.
	(Analyze_Refined_Depends_In_Decl_Part): Do not
	check the syntax of pragma Refined_Depends explicitly, this is now
	done by the analysis.
	(Analyze_Refined_Global_In_Decl_Part): Do
	not check the syntax of pragma Refined_Global explicitly, this is
	now done by the analysis.
	(Analyze_Refined_State_In_Decl_Part):
	Do not check the syntax of pragma Refined_State explicitly, this
	is now done by the analysis.
	(Check_Dependence_List_Syntax): Removed.
	(Check_Global_List_Syntax): Removed.
	(Check_Initialization_List_Syntax): Removed.
	(Check_Item_Syntax): Removed.
	(Check_Missing_Part_Of): Do not consider items from an instance.
	(Check_Refinement_List_Syntax): Removed.
	(Check_State_Declaration_Syntax): Removed.
	(Collect_Global_List): Do not raise Program_Error when the input is
	malformed.
	(Process_Global_List): Do not raise Program_Error when the input
	is malformed.
	* sem_ch13.adb: Minor reformatting.

2014-06-13  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Find_Type_Name): Diagnose a private type completion
	that is an interface definition with an interface list.
	(Process_Full_View): Move error message on missmatched interfaces
	between views to the declaration of full view, for clarity.
	* sem_ch9.adb (Check_Interfaces): Move error message to full view,
	for clarity.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb (Expand_N_Attribute_Reference, case Pred/Succ): Change
	reason to Overflow.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* makeutl.adb: Minor reformatting.

2014-06-13  Gail Schenker  <schenker@adacore.com>

	* debug.adb, sem_eval.adb (Why_Not_Static): Remove temporary code and
	associated flag (d.z), no longer needed.

2014-06-13  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): For Import and
	Export aspects, do not check whether a corresponding Convention
	aspect has been specified. Convention is optional in Ada2012,
	and defaults to Convention_Ada.

2014-06-13  Eric Botcazou  <ebotcazou@adacore.com>

	* checks.adb (Apply_Address_Clause_Check): Only issue the new
	warning if the propagation warning is issued.

2014-06-13  Thomas Quinot  <quinot@adacore.com>

	* exp_ch4.adb: Minor reformatting.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb (Expand_N_Attribute_Reference, case Pred):
	Handle float range check case (Expand_N_Attribute_Reference,
	case Succ): Handle float range check case.
	* sem_attr.adb (Analyze_Attribute, case Pred/Succ): Handle float
	range check case.

2014-06-13  Vincent Celier  <celier@adacore.com>

	* makeutl.ads (Compute_Builder_Switches): Change name of
	parameter Root_Environment to Env.
	* prj-conf.adb (Check_Switches): Call Locate_Runtime with the
	Env parameter of procedure Get_Or_Create_Configuration_File.
	(Locate_Runtime): Call Find_Rts_In_Path with the Project_Path
	of new parameter Env.
	* prj-conf.ads (Locate_Runtime): New parameter Env of type
	Prj.Tree.Environment.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Minor comment clarification for Check_Float_Overflow.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb, exp_ch9.adb, lib-writ.adb, g-comlin.adb: Minor
	reformatting.
	* sem_attr.adb: Minor code reformatting and simplification.
	* checks.adb: Fix minor typo.

2014-06-13  Emmanuel Briot  <briot@adacore.com>

	* g-comlin.adb (Get_Argument): fix expansion
	of command line arguments (e.g. "*.adb") when using a custom
	parser. The parser was not passed to the recursive call, and
	thus we were trying to do the expansion on the default command
	line parser.

2014-06-13  Thomas Quinot  <quinot@adacore.com>

	* exp_ch9.adb: Minor reformatting.

2014-06-13  Ed Schonberg  <schonberg@adacore.com>

	* exp_attr.adb (Expand_N_Attribute_Reference, case 'Old):
	To determine whether the attribute should be expanded, examine
	whether the enclosing postcondition pragma is to be checked,
	rather than using the internal flag Assertions_Enabled.

2014-06-13  Ben Brosgol  <brosgol@adacore.com>

	* gnat_rm.texi: Minor fixes.
	* gnat_ugn.texi: Added a missing "@itemize".

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Remove -gnatd.1 flag documentation.
	* layout.adb (Layout_Type): Remove special handling of size
	for anonymous access type.
	* sem_ch3.adb (Replace_Type): Remove special handling of size
	for anonymous access type.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Document debug flag -gnatd.1.
	* layout.adb (Layout_Type): Size change for anonymous access
	types under -gnatd.1.
	* sem_ch3.adb (Replace_Type): Size change for anonymous access
	types under -gnatd.1.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* layout.adb (Layout_Type): Anonymous access types designating
	unconstrained arrays are always thin pointers.
	* sem_ch3.adb (Replace_Type): Anonymous access types designating
	unconstrained arrays are always thin pointers.

2014-06-13  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Analyze_Attribute): Use Check_Parameterless_Call
	to resolve the prefix of an attribute that is an entity name
	and may be a parameterless call.  Minor code reorganization.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* lib.ads, lib.adb, lib-writ.adb, lib-load.adb (Is_Compiler_Unit):
	Removed.
	* opt.ads (Compiler_Unit): New flag.
	* par-ch5.adb (Test_Statement_Required): Call Check_Compiler_Unit
	for null statement sequence (not allowed in compiler unit).
	* par-prag.adb (Prag): Handle Compiler_Unit[_Warning] during
	parsing.
	* restrict.ads, restrict.adb (Check_Compiler_Unit): New version and new
	calling sequence.
	* sem_ch11.adb, sem_ch3.adb, sem_ch4.adb: New calling sequence for
	Check_Compiler_Unit.
	* sem_ch6.adb (Analyze_Extended_Return_Statement): Call
	Check_Compiler_Unit (this construct is not allowed in compiler
	units).
	* sem_prag.adb (Analyze_Pragma, case Compiler_Unit[_Warning]):
	Set Opt.Compiler_Unit.

2014-06-13  Geert Bosch  <bosch@adacore.com>

	* gnat_rm.texi, s-tasinf-solaris.ads, sem_prag.adb, gnat_ugn.texi,
	s-tasinf-mingw.ads, s-tasinf.ads, s-tasinf-linux.ads,
	s-tasinf-vxworks.ads: Make Task_Info pragma and package obsolescent.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* s-tasini.adb, s-tarest.adb, s-taprob.adb: Minor reformatting.

2014-06-13  Hristian Kirtchev  <kirtchev@adacore.com>

	* freeze.adb (Freeze_Entity): Remove the check concerning volatile
	types in SPARK as it is poorly placed and poorly formulated. The
	check was flagging ALL volatile entities as illegal in SPARK.
	* sem_prag.adb (Process_Atomic_Shared_Volatile): Flag volatile
	types as illegal in SPARK.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* sem_cat.adb: Minor reformatting.

2014-06-13  Yannick Moy  <moy@adacore.com>

	* sem_prag.adb (Analyze_Pragma/Post_Class): Fix typo.

2014-06-13  Arnaud Charlet  <charlet@adacore.com>

	* gnat_rm.texi: Add detail on SPARK_05 restriction.

2014-06-13  Bob Duff  <duff@adacore.com>

	* s-solita.adb (Get_Sec_Stack_Addr, Init_Tasking_Soft_Links):
	Add assertions requiring the secondary stack to be initialized.
	* s-solita.ads (Init_Tasking_Soft_Links): Comment.
	* s-taprob.adb, s-tarest.adb, s-tasini.adb (elab code): Make sure the
	secondary stack is initialized before calling Init_Tasking_Soft_Links,
	by adding pragmas Elaborate_Body.

2014-06-13  Thomas Quinot  <quinot@adacore.com>

	* sem_ch13.adb (Analyze_Stream_TSS_Definition): Remove temporary
	kludge disabling new legality check.

2014-06-13  Hristian Kirtchev  <kirtchev@adacore.com>

	* freeze.adb (Freeze_Record_Type): Remove checks related to SPARK
	volatile types.
	(Freeze_Type): Volatile types are now illegal in SPARK.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* aspects.ads, aspects.adb: Add aspect Thread_Local_Storage.
	* gnat_rm.texi: Document aspect Thread_Local_Storage.

2014-06-13  Ed Schonberg  <schonberg@adacore.com>

	* sem_cat.adb (Validate_Static_Object_Name): A constant whose
	value is a temporary that renames an aggregate is legal in a
	preelaborated unit. Illegalities, if any will be detected in
	the aggregate components.

2014-06-13  Ed Schonberg  <schonberg@adacore.com>

	* einfo.ads: Minor reformatting an comment expansion.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* back_end.ads, back_end.adb: Make_Id, Make_SC, Set_RND are moved to
	Tbuild.
	* tbuild.ads, tbuild.adb: Make_Id, Make_SC, Set_RND are moved here from
	Back_End.
	* gnat1drv.adb: Make_Id, Make_SC, Set_RND are moved to Tbuild
	* sem_warn.adb: Minor reformatting.

2014-06-13  Doug Rupp  <rupp@adacore.com>

	* adaint.c (__gnat_open_new_temp) [VMS]: Open binary
	files with rfm=udf.

2014-06-13  Yannick Moy  <moy@adacore.com>

	* sem_warn.adb (Check_Unset_References): Take
	case of Refined_Post into account in Within_Postcondition check.

2014-06-13  Hristian Kirtchev  <kirtchev@adacore.com>

	* freeze.adb (Freeze_Record_Type): Volatile types are not allowed in
	SPARK.

2014-06-13  Yannick Moy  <moy@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications/Aspect_Import,
	Aspect_Export): Consider that variables may be set outside the program.

2014-06-13  Robert Dewar  <dewar@adacore.com>

	* back_end.adb (Make_Id): New function.
	(Make_SC): New function.
	(Set_RND): New procedure.
	* back_end.ads (Make_Id): New function.
	(Make_SC): New function.
	(Set_RND): New procedure.
	* einfo.ads: Minor comment updates.
	* frontend.adb: Move Atree.Initialize call to Gnat1drv.
	* gnat1drv.adb (Gnat1drv): New calling sequence for
	Get_Target_Parameters.
	(Gnat1drv): Move Atree.Initialize here from Frontend.
	* targparm.adb (Get_Target_Parameters): New calling
	sequence (Get_Target_Parameters): Handle pragma Restriction
	(No_Dependence,..)
	* targparm.ads (Get_Target_Parameters): New calling sequence.

2014-06-13  Gary Dismukes  <dismukes@adacore.com>

	* sem_prag.adb (Process_Import_Or_Interface): Exit the homonym
	loop if the pragma does not come from source, so that an implicit
	pragma Import only applies to the first declaration, avoiding
	possible conflicts with earlier explicit and implicit declarations
	due to multiple Provide_Shift_Operators pragmas.
	(Set_Imported): Remove previous fix that bypassed pragma duplication
	error.
	* gnat_rm.texi: Change 'equivalent' to 'similar' in description
	of Provide_Shift_Operators.

2014-06-12  Jan Hubicka  <hubicka@ucw.cz>

	* gcc-interface/utils.c (process_attributes) <ATTR_LINK_SECTION>: Pass
	string pointer directly to set_decl_section_name.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb: Minor reformatting.

2014-06-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Check_Clause_Syntax): Add new
	local variable Outputs. Account for the case where multiple
	output items appear as an aggregate.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* sem_warn.adb (Output_Obsolescent_Entity_Warnings): Tag warning
	with ?j? not ??.

2014-06-11  Ed Schonberg  <schonberg@adacore.com>

	* einfo.ads: Minor reformatting.

2014-06-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* a-cbdlli.adb, a-cdlili.adb, a-cidlli.adb, a-crdlli.adb (Insert): Add
	new variable First_Node. Update the position after all insertions have
	taken place to First_Node.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Remove debug flag -gnatd.1, no longer needed.
	* layout.adb (Layout_Type): Remove test of -gnatd.1.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb: Minor reformatting.

2014-06-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Check_Clause_Syntax): Add new
	local variable Outputs. Account for the case where multiple
	output items appear as an aggregate.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* sem_warn.adb (Output_Obsolescent_Entity_Warnings): Tag warning
	with ?j? not ??.

2014-06-11  Ed Schonberg  <schonberg@adacore.com>

	* einfo.ads: Minor reformatting.

2014-06-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* a-cbdlli.adb, a-cdlili.adb, a-cidlli.adb, a-crdlli.adb (Insert): Add
	new variable First_Node. Update the position after all insertions have
	taken place to First_Node.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Remove debug flag -gnatd.1, no longer needed.
	* layout.adb (Layout_Type): Remove test of -gnatd.1.

2014-06-11  Thomas Quinot  <quinot@adacore.com>

	* freeze.ads: Minor reformatting.
	* checks.adb (Determine_Range): Do not attempt to determine
	the range of a deferred constant whose full view has not been
	seen yet.
	* sem_res.adb (Resolve): Remove undesirable guard against
	resolving expressions from expression functions.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* debug.adb (Debug_Flag_Dot_1): Set to enable fix for anonymous
	access types.
	* layout.adb (Layout_Type): Make anonymous access types for
	subprogram formal types and return types always thin. For now
	only enabled if -gnatd.1 set.

2014-06-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Analyze_Stream_TSS_Definition): Apply legality
	rule for stream attributes of interface types (RM 13.13.2 (38/3)):
	subprogram must be a null procedure.

2014-06-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Input_Item): Allow formal
	parameters to appear as input_items in an initialization_list
	of pragma Initializes. Encapsulation now applies to states and
	variables only (as it should). Add RM references to key errors.
	* sem_prag.adb (Set_Imported): Suppress errors
	about preceding Imports when the pragma does not come from source,
	which can happen through use of pragma Provide_Shift_Operators.

2014-06-11  Thomas Quinot  <quinot@adacore.com>

	* sem_ch3.adb: Minor reformatting.
	* einfo.ads (Full_View): Minor comment update.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* einfo.adb (Is_Independent): New flag.
	* einfo.ads (Is_Independent): New flag.
	(Has_Independent_Components): Clean up and fix comments.
	* sem_prag.adb (Fix_Error): Deal with changing argument
	[of] to entity [for].
	(Analyze_Pragma, case Independent): Set Is_Independent flag
	(Analyze_Pragma, case Independent_Components): Set Is_Independent flag
	in all components of specified record.

2014-06-11  Thomas Quinot  <quinot@adacore.com>

	* sem_ch12.adb (Analyze_Formal_Decimal_Fixed_Point_Type):
	Set proper Etype on bounds of dummy type created for analysis
	of the generic.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Minor comment fix (add missing section of dot
	numeric flags).

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi, switch-c.adb, sem_prag.adb, a-tgdico.ads, par-prag.adb,
	opt.ads, a-finali.ads, snames.ads-tmpl: Remove all traces of
	pragma/aspects Pure_05 Pure_12 Preelaborate_05.
	* errout.adb (Output_Messages): Avoid duplicate output for
	library level instance.
	* sem_elab.adb (Is_Call_Of_Generic_Formal): Moved to outer level
	(Check_Elab_Call): Add call to Is_Call_Of_Generic_Formal
	* exp_ch4.adb (Expand_N_Op_Expon): New interface for Exp_Modular.
	* s-expmod.ads, s-expmod.adb (Exp_Modular): Change interface to
	accomodate largest modulus value.
	* gnat_ugn.texi: Minor updates.

2014-06-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Instantiate_Package_Body): Do not attempt to
	load body of generic package or its parent, if body is optional
	and the unit does not require a body.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document System.Unsigned_Types.
	* impunit.adb: System.Unsigned_Types (s-unstyp.ads) is user accessible.
	* s-unstyp.ads: Update comments (this is now user available unit).

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* make.adb, sem_res.adb: Minor reformatting.

2014-06-11  Thomas Quinot  <quinot@adacore.com>

	* a-astaco.ads, a-tags.ads, s-excdeb.ads, a-tgdico.ads, a-stmaco.ads,
	a-except-2005.ads, s-except.ads, a-taside.ads, a-dynpri.ads,
	a-chahan.ads, a-sytaco.ads, s-stalib.ads, a-strmap.ads: Change pragmas
	Preelaborate_05 to just Preelaborate in runtime units, and similarly
	change Pure_05 to just Pure.

2014-06-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Contract): Do not attempt
	analysis if error has been posted on subprogram body.

2014-06-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Analyze_Stream_TSS_Definition): Apply legality
	rule given in RM 13.1 (8/1) for operational attributes to stream
	attributes: the attribute must apply to a first subtype. Fixes
	missing errors in ACATS test bdd2004.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* exp_ch3.adb (Build_Record_Init_Proc): Don't build for variant
	record type if restriction No_Implicit_Conditionals is active.
	(Expand_N_Object_Declaration): Don't allow default initialization
	for variant record type if restriction No_Implicit_Condition is active.
	(Build_Variant_Record_Equality): Don't build for variant
	record type if restriction No_Implicit_Conditionals is active.
	* exp_ch4.adb (Expand_N_Op_Eq): Error if variant records with
	No_Implicit_Conditionals.
	* sem_aux.ads, sem_aux.adb (Has_Variant_Part): New function.

2014-06-11  Ramon Fernandez  <fernandez@adacore.com>

	* i-cstrin.ads: Update comments.

2014-06-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Resolve_Selected_Component): Handle properly a
	selected component whose prefix is overloaded, when none of the
	interpretations matches the expected type.

2014-06-11  Bob Duff  <duff@adacore.com>

	* make.adb (Wait_For_Available_Slot): Give a more
	informative error message; if the ALI file is not found, print
	the full path of what it's looking for.

2014-06-11  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi, vms_data.ads: add description of gnatstub -W<par>
	option to specify the result file encoding.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* errout.ads, sem_ch12.adb: Minor reformatting.
	* debug.adb, erroutc.adb: Remove -gnatd.q debug switch.
	* lib-xref.adb: Minor reformatting.
	* restrict.adb: Minor code reorganization (put routines in
	alpha order).

2014-06-11  Yannick Moy  <moy@adacore.com>

	* einfo.ads: Minor typo in comment

2014-06-11  Ed Schonberg  <schonberg@adacore.com>

	* sinfo.ads, sinfo.adb: New attribute Uninitialized_Variable, for
	formal private types and private type extensions, to indicate
	variable in a generic unit whose uninitialized use suggest that
	actual type should be fully initialized.
	Needs_Initialized_Actual:  removed, functionaity replaced by
	the above.
	* lib-xref.adb (Generate_Reference): Generate a reference for
	variables of a formal type when the unit is not the main unit,
	to enable appropriate warnings in an instance.
	* sem_ch12.adb (Check_Ininialized_Type): Improve warning on use
	of variable in a generic unit that suggests that actual type
	should be full initialized.
	* sem_warn.adb; (May_Need_Initialized_Actual): Make into procedure
	and do not emot warning, which now only appears in an instance.

2014-06-11  Eric Botcazou  <ebotcazou@adacore.com>

	* gnat_ugn.texi: Fix minor typo.

2014-06-11  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb Add with and use clause for Sem_Ch10.
	(Analyze_Declarations): Code reformatting. Analyze the contract
	of a subprogram body stub at the end of the declarative region.
	* sem_ch6.adb (Analyze_Subprogram_Body_Contract): Spec_Id is
	now a variable. Do not process the body if its contract is not
	available. Account for subprogram body stubs when extracting
	the corresponding spec.
	* sem_ch6.ads (Analyze_Subprogram_Contract): Update the comment
	on usage.
	* sem_ch10.ads, sem_ch10.adb (Analyze_Subprogram_Body_Stub_Contract):
	New routine.
	* sem_prag.adb (Analyze_Depends_In_Decl_Part):
	Account for subprogram body stubs when extracting the
	corresponding spec.
	(Analyze_Global_In_Decl_List):
	Account for subprogram body stubs when extracting the
	corresponding spec.
	(Analyze_Refined_Depends_In_Decl_Part):
	Use Find_Related_Subprogram_Or_Body to retrieve the declaration
	of the related body. Spec_Is now a variable. Account for
	subprogram body stubs when extracting the corresponding spec.
	(Analyze_Refined_Global_In_Decl_Part): Use
	Find_Related_Subprogram_Or_Body to retrieve the declaration
	of the related body. Spec_Is now a variable. Account for
	subprogram body stubs when extracting the corresponding spec.
	(Collect_Subprogram_Inputs_Output): Account for subprogram body
	stubs when extracting the corresponding spec.

2014-06-11  Vincent Celier  <celier@adacore.com>

	* gnatcmd.adb (Process_Link): Do not invoke gnatlink with
	-lgnarl or -lgnat.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Add debug flag -gnatd.q.
	* erroutc.adb (Prescan_Message): Bomb if untagged warning with
	-gnatd.q set.
	* styleg.adb (Check_Xtra_Parens): Message should be a style
	message.
	* sem_aggr.adb, sem_ch3.adb, exp_ch9.adb, checks.adb, sem_prag.adb,
	par-endh.adb, eval_fat.adb, freeze.adb, sem_util.adb, sem_attr.adb,
	sem_elab.adb, sem_ch6.adb, sem_warn.adb, sem_cat.adb,
	sem_ch13.adb, lib-xref.adb: Add remaining warning tags.

2014-06-11  Ben Brosgol  <brosgol@adacore.com>

	* gnat_rm.texi: Revised chapter on Implementation Defined
	Characteristics.

2014-06-11  Geert Bosch  <bosch@adacore.com>

	* s-exctab.adb: avoid race conditions in exception registration.

2014-06-11  Robert Dewar  <dewar@adacore.com>

	* errout.adb (Warn_Insertion): New function.
	(Error_Msg): Use Warn_Insertion and Prescan_Message.
	(Error_Msg_Internal): Set Info field of error object.
	(Error_Msg_NEL): Use Prescan_Message.
	(Set_Msg_Text): Don't store info: at start of message.
	(Skip_Msg_Insertion_Warning): New name for Set_Msg_Insertion_Warning.
	(Skip_Msg_Insertion_Warning): Now just skips warning insertion.
	* errout.ads: Document new ?$? and >$> insertion sequences
	Document use of "(style)" and "info: "
	* erroutc.adb (dmsg): Print several missing fields
	(Get_Warning_Tag): Handle -gnatel case (?$?)  (Output_Msg_Text):
	Deal with new tagging of info messages
	* erroutc.ads: Is_Info_Msg: New global (Error_Msg_Object):
	Add field Info (Prescan_Message): New procedure, this procedure
	replaces the old Test_Style_Warning_Serious_Unconditional_Msg
	* errutil.adb, exp_util.adb, par-ch7.adb, sem_ch13.adb, sem_ch7.adb,
	sem_elab.adb: Follow new rules for info message (info belongs
	only at the start of a message, and only in the first message,
	not in any of the continuations).
	* gnat_ugn.texi: Document full set of warning tags.

2014-06-11  Gary Dismukes  <dismukes@adacore.com>

	* sem_util.adb: Minor typo fix.

2014-06-11  Ed Schonberg  <schonberg@adacore.com>

	* sem_warn.adb (Check_References): Do not emit spurious warnings
	on uninitialzed variable of a formal private type if variable
	is not read.

2014-06-09  Jan Hubicka  <hubicka@ucw.cz>

	* gcc-interface/utils.c (process_attributes) <ATTR_LINK_SECTION>: Use
	set_decl_section_name accessor.

2014-05-22  Thomas Schwinge  <thomas@codesourcery.com>

	* gcc-interface/utils.c (DEF_FUNCTION_TYPE_0, DEF_FUNCTION_TYPE_6)
	(DEF_FUNCTION_TYPE_7, DEF_FUNCTION_TYPE_8)
	(DEF_FUNCTION_TYPE_VAR_5): Cosmetic fixes.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* layout.adb: Minor reformatting.
	* sem_prag.adb (Analyze_Pragma, case Inspection_Point): Call
	dummy procedure ip.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* restrict.ads (Implementation_Restriction): Add entry for
	No_Fixed_IO.
	* rtsfind.ads: Add entries for Fixed_IO and Decimal_IO in
	Ada.[Wide_[Wide_]Text_IO.
	* s-rident.ads (Restriction_Id): Add entry for No_Fixed_IO.
	* sem_attr.adb (Analyze_Attribute): Disallow fixed point types
	for Img, Image, Value, Wide_Image, Wide_Value, Wide_Wide_Image,
	Wide_Wide_Value if restriction No_Fixed_IO is set.
	* sem_util.adb (Set_Entity_Checks): Check restriction No_Fixed_IO.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* gnatcmd.adb: Minor error msg changes (no upper case letter
	at start).
	* sem_ch12.adb, sem_ch5.adb, sem_res.adb, sem_util.adb: Minor
	reformatting.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Debug flag -gnatd.G inhibits static elab tracing
	via generic formals.
	* sem_elab.adb (Is_Call_Of_Generic_Formal): Return False if
	-gnatd.G is set.

2014-05-21  Thomas Quinot  <quinot@adacore.com>

	* exp_pakd.adb (Revert_Storage_Order): Renamed from Byte_Swap to
	more accurately describe that this subprogram needs to come into
	play also in cases where no byte swapping is involved, because
	it also takes care of some required shifts (left-justification
	of values).

2014-05-21  Thomas Quinot  <quinot@adacore.com>

	* freeze.adb (Check_Component_Storage_Order): Indicate whether
	a Scalar_Storage_Order attribute definition is present for the
	component's type.
	(Freeze_Record_Type): Suppress junk warnings
	about purportedly junk Bit_Order / Scalar_Storage_Order attribute
	definitions.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* sem_ch8.adb (Analyze_Subprogram_Renaming): Put back call
	to Kill_Elaboration_Checks.

2014-05-21  Gary Dismukes  <dismukes@adacore.com>

	* layout.adb (Assoc_Add): Suppress the optimization of the (E
	- C1) + C2 case, when the expression type is unsigned and C1 <
	C2, to avoid creating a negative literal when folding.

2014-05-21  Hristian Kirtchev  <kirtchev@adacore.com>

	* freeze.adb (Freeze_Record_Type): Update the use of
	Is_SPARK_Volatile.
	* sem_ch3.adb (Analyze_Object_Contract): Update the use of
	Is_SPARK_Volatile.
	(Process_Discriminants): Update the use of Is_SPARK_Volatile.
	* sem_ch5.adb (Analyze_Iterator_Specification): Update the use
	of Is_SPARK_Volatile.
	(Analyze_Loop_Parameter_Specification):
	Update the use of Is_SPARK_Volatile.
	* sem_ch6.adb (Process_Formals): Catch an illegal use of an IN
	formal parameter when its type is volatile.
	* sem_prag.adb (Analyze_Global_Item): Update the use of
	Is_SPARK_Volatile.
	* sem_res.adb (Resolve_Entity_Name): Correct the guard which
	determines whether an entity is a volatile source SPARK object.
	* sem_util.adb (Has_Enabled_Property): Accout for external
	properties being set on objects other than abstract states
	and variables. An example would be a formal parameter.
	(Is_SPARK_Volatile): New routine.
	(Is_SPARK_Volatile_Object):
	Remove the entity-specific tests. Call routine Is_SPARK_Volatile
	when checking entities and/or types.
	* sem_util.ads (Is_SPARK_Volatile): New routine.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* sem_warn.adb: Minor fix to warning messages (use ?? instead
	of ?).

2014-05-21  Vincent Celier  <celier@adacore.com>

	* gnatcmd.adb (GNATCmd): For platforms other than VMS, recognize
	switch --version and --help.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* sem_elab.adb (Is_Call_Of_Generic_Formal): New function.

2014-05-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Iterator_Specification): Set type of
	iterator variable when the domain of iteration is a formal
	container and this is an element iterator.

2014-05-21  Bob Duff  <duff@adacore.com>

	* sem_ch12.adb: Minor reformatting.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* sinfo.ads, sem_ch12.adb, sem_warn.adb: Minor reformatting.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* sem_elab.adb: Minor reformatting.
	* s-taprop.ads: Minor comment fix.
	* sem_ch8.adb (Analyze_Subprogram_Renaming): Remove call to
	Kill_Elaboration_Checks.
	* errout.adb, erroutc.adb: Minor reformatting.

2014-05-21  Thomas Quinot  <quinot@adacore.com>

	* exp_pakd.adb (Byte_Swap): Handle the case of a sub-byte
	component. No byte swapping occurs, but this procedure also takes
	care of appropriately justifying the argument.

2014-05-21  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch6.adb: sem_ch6.adb (Analyze_Aspects_On_Body_Or_Stub):
	New routine.
	(Analyze_Subprogram_Body_Helper): Move the
	analysis of aspect specifications and the processing of the
	subprogram body contract after inlining has taken place.
	(Diagnose_Misplaced_Aspect_Specifications): Removed.

2014-05-21  Javier Miranda  <miranda@adacore.com>

	* sem_ch3.adb (Build_Derived_Record_Type): Revert previous change.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* sem_eval.ads, sem_eval.adb (Why_Not_Static): Messages are not
	continuations any more.

2014-05-21  Ed Schonberg  <schonberg@adacore.com>

	* sinfo.ads, sinfo.adb: New flag Needs_Initialized_Actual,
	present in formal_Private_Definitions and on private extension
	declarations of a formal derived type. Set when the use of the
	formal type in a generic suggests that the actual should be a
	fully initialized type.
	* sem_warn.adb (May_Need_Initialized_Actual): new subprogram
	to indicate that an entity of a generic type has default
	initialization, and that the corresponing actual type in any
	subsequent instantiation should be fully initialized.
	* sem_ch12.adb (Check_Initialized_Type): new subprogram,
	to emit a warning if the actual for a generic type on which
	Needs_Initialized_Actual is set is not a fully initialized type.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* sem_elab.adb, prj-dect.adb: Minor reformatting.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* erroutc.ads: Minor comment addition.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* errout.ads: Add documentation for use of >*> tag.
	* restrict.adb: Make sure we use >*> tag for restriction warnings.

2014-05-21  Gary Dismukes  <dismukes@adacore.com>

	* debug.adb: Add case of illegal overriding_indicator for a
	protected subprogram body to description of -gnatd.E switch.
	* sem_ch6.adb (Verify_Overriding_Indicator): Issue error message
	for cases of giving overriding_indicators on protected subprogram
	bodies, but change this to a warning if -gnatd.E is enabled. No
	longer give a style warning about missing indicators on protected
	subprogram bodies.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* prj.ads, sem_ch12.adb, prj.adb, exp_pakd.adb,
	sem_elab.ads: Minor reformatting.
	* erroutc.adb, erroutc.ads (Warning_Specifically_Suppressed): Make Tag
	parameter optional.

2014-05-21  Pascal Obry  <obry@adacore.com>

	* prj-dect.adb: Allow package Install in aggregate project.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications):
	Insert_Delayed_Pragma is now used for the case of Attach_Handler.
	* sem_prag.adb: Minor comment improvements.

2014-05-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Install_Body): When checking whether freezing of
	instantiation must be delayed, verify that the common enclosing
	subprogram to generic and instance is in fact an overloadable
	entity.

2014-05-21  Vincent Celier  <celier@adacore.com>

	* makeutl.adb (Mains.Complete_Mains.Do_Complete): Look for all
	mains with the same name and fail if there is more than one.
	* prj.ads, prj.adb (Find_All_Sources): New function

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb: Minor reformatting.
	* lib-xref-spark_specific.adb, sem_util.adb: Minor reformatting.
	* sem_prag.adb: Minor error message improvement.

2014-05-21  Yannick Moy  <moy@adacore.com>

	* lib-xref-spark_specific.adb, lib-xref.ads, lib-xref.adb
	(Enclosing_Subprogram_Or_Package): Only return a library-level
	package.

2014-05-21  Javier Miranda  <miranda@adacore.com>

	* sem_ch3.adb (Build_Derived_Record_Type): Initialize Parent_Base
	to the full view of the parent type when processing a derived type
	which is the full view of a private type not defined in a generic
	unit which is derived from a private type with discriminants
	whose full view is a non-tagged record type.

2014-05-21  Javier Miranda  <miranda@adacore.com>

	* exp_ch4.adb (Expand_Allocator_Expression.Apply_Accessibility_Check):
	Complete previous patch.

2014-05-21  Thomas Quinot  <quinot@adacore.com>

	PR ada/9535
	* g-socket.adb (Read and Write for Datagram_Socket_Stream_Type):
	Provide a behaviour more consistent with underlying datagram
	socket: do not attempt to loop over Send_Socket/Receive_Socket
	iterating along the buffer.

2014-05-21  Hristian Kirtchev  <kirtchev@adacore.com>

	* freeze.adb (Freeze_Record_Type): Ensure that a discriminated
	or a tagged type is not labelled as volatile. Ensure that a
	non-volatile type has no volatile components.
	* sem_ch3.adb (Analyze_Object_Contract): Add local constant
	Obj_Typ. Code reformatting.  Ensure that a discriminated or
	tagged object is not labelled as volatile.
	* sem_prag.adb (Process_Atomic_Shared_Volatile): Ensure that
	pragma Volatile applies to a full type declaration or an object
	declaration when SPARK mode is on.

2014-05-21  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi: For ASIS tools, reword the paragraph about
	providing options needed for compiling the argument source for
	the situation when a project file can be used as a tool parameter.

2014-05-21  Gary Dismukes  <dismukes@adacore.com>

	* gnat_rm.texi: Minor typo fix.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* stand.adb (Tree_Read): Read missing entities.
	(Tree_Write): Write missing entities.

2014-05-21  Ben Brosgol  <brosgol@adacore.com>

	* gnat_ugn.texi: Wordsmithing edits to Coupling Metrics Control
	section in gnatmetric chapter.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* exp_ch6.adb (Expand_Actuals): Spec moved here, since not used
	outside Exp_Ch6 (Expand_Actuals): Deal with proper insertion of
	post-call copy write back (see detailed comment in code).
	* exp_ch6.ads (Expand_Actuals): Moved to body, not used outside
	Exp_Ch6.
	* tbuild.ads: Minor reformatting.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* stand.ads: Add warning about adding new entities and
	Tree_Read/Tree_Write.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb (Set_Entity_With_Checks): Don't complain about
	references to restricted entities within the units in which they
	are declared.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* gnat1drv.adb (Check_Bad_Body): Use Source_File_Is_Body to
	simplify the needed test, and also deal with failure to catch
	situations with non-standard names.
	* sinput-l.ads, sinput-l.adb (Source_File_Is_No_Body): New function
	(Source_File_Is_Subunit): Removed, no longer used.

2014-05-21  Javier Miranda  <miranda@adacore.com>

	* exp_ch4.adb
	(Expand_Allocator_Expression.Apply_Accessibility_Check): for a
	renaming of an access to interface object there is no need to
	generate extra code to reference the tag.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* errout.adb, erroutc.adb, erroutc.ads: Allow warning tag in pragma
	Warnings (Off, string).

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* osint.adb: Fix three error messages to say invalid instead
	of erroneous.
	* par-ch4.adb, exp_aggr.adb, sem_attr.adb, sem_aux.adb, sem_ch3.adb,
	sem_ch5.adb, sem_ch6.adb, sem_ch7.adb, sem_dim.adb, sem_res.adb,
	sem_util.adb, sem_util.ads: Fix incorrect use of erroneous in comments.

2014-05-21  Ed Schonberg  <schonberg@adacore.com>

	* freeze.adb, sem_ch13.adb, sem_ch13.ads, sem_ch9.adb,
	sem_ch9.ads: Move discriminant manipulation routines for analysis of
	aspect specifications from sem_ch9 to sem_ch13, where they belong.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Clearly document -gnatw.g (GNAT warnings).
	Clearly document -gnatyg (GNAT style switches).
	* usage.adb: Add line line for -gnatw.g (GNAT warnings) More
	detail for line for -gnatyg (GNAT style switches) -gnatw.d/D is
	available for VMS after all.
	* warnsw.adb: Reorganize to eliminate duplicated code
	(Restore_Warnings): Add a couple of missing entries
	(Save_Warnings): Add a couple of missing entries.
	* warnsw.ads: Add missing entries to Warning_Record (not clear
	what the impact is).

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* errout.adb (Set_Msg_Insertion_Warning): Handle ?*? (restriction
	warning) case.
	* errout.ads: Document ?*? (restriction warning) insertion.
	* erroutc.adb (Get_Warning_Tag): Deal with ?*? (restriction
	warning) case.
	* erroutc.ads: Document use of * for restriction warning tag.
	* restrict.adb (Restriction_Msg): Tag with ?*? instead of ??.

2014-05-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch9.adb (Push_Scope_And_Install_Discriminants): Do not
	make discriminants immediately visible when analyzing an aspect
	of a subtype declaration.
	(Uninstall_Discriminants): Do not apply to the entity in a
	subtype declaration.

2014-05-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb: Code clean up.

2014-05-21  Eric Botcazou  <ebotcazou@adacore.com>

	* gnat_ugn.texi: Document -Werror.

2014-05-21  Bob Duff  <duff@adacore.com>

	* sem_util.adb (Is_Dependent_Component_Of_Mutable_Object):
	This was returning False if the Object is a constant view. Fix
	it to return True in that case, because it might be a view of
	a variable.
	(Has_Discriminant_Dependent_Constraint): Fix latent
	bug; this function was crashing when passed a discriminant.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Remove misplaced section that is now obsolete.
	* s-arit64.adb: Minor code reorganization.
	* sem_prag.adb: Minor comment fix (remove erroneous use of the
	term erroneous).

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* g-table.adb, g-dyntab.adb (Reallocate): Fix possible overflow in
	computing new table size.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* einfo.ads: Minor reformatting.
	* ceinfo.adb: Deal with slight format change of einfo.ads.

2014-05-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Analyze_Part_Of): Further work on the proper
	implementation of the SPARK 2014 rule concerning private child
	units (LRM 7.2.6).

2014-05-21  Vincent Celier  <celier@adacore.com>

	* makeusg.adb: Add switch -d to usage.

2014-05-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb (Find_Actual): If an actual that is the prefix
	of an enclosing prefixed call has been rewritten, use Nkind
	and Sloc to identify the corresponding formal, when handling
	deferred references.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Document -gnatd.z switch.
	* sem_eval.adb (Why_Non_Static): Test -gnatd.z switch.

2014-05-21  Robert Dewar  <dewar@adacore.com>

	* einfo.ads (Can_Never_Be_Null): Minor comment update.
	* sem_prag.adb (Check_Arg_Is_Task_Dispatching_Policy): Minor
	error message change.
	* s-arit64.adb ("abs"): New function. Use expression functions
	for the simple conversions and arithmetic.

2014-05-18  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (Subprogram_Body_to_gnu): Rework comment and
	set function_start_locus.

2014-05-18  Eric Botcazou  <ebotcazou@adacore.com>

	* utils.c (gnat_write_global_declarations): Adjust the flags put on
	dummy_global.

2014-05-18  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (change_qualified_type): New static function.
	(gnat_to_gnu_entity): Use it throughout to add qualifiers on types.
	<E_Array_Type>: Set TYPE_VOLATILE on the array type directly.
	<E_Array_Subtype>: Likewise.
	Do not set flags on an UNCONSTRAINED_ARRAY_TYPE directly.
	(gnat_to_gnu_component_type): Likewise.
	(gnat_to_gnu_param): Likewise.

2014-05-18  Eric Botcazou  <ebotcazou@adacore.com>

	* fe.h (Set_Present_Expr): Move around.
	(End_Location): New macro.
	* gcc-interface/trans.c (Case_Statement_to_gnu): Use End_Location.

2014-05-18  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity): Use Underlying_Type in
	lieu of more verbose construct.
	* gcc-interface/trans.c (Call_to_gnu): Likewise.
	(gnat_to_gnu): Likewise.  Remove obsolete code.

2014-05-18  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <E_Array_Subtype>: Do not
	consider that regular packed arrays can never be superflat.

2014-05-17  Trevor Saunders  <tsaunders@mozilla.com>

	* gcc-interface/ada-tree.h: Remove usage of variable_size gty
	annotation.
	* gcc-interface/decl.c (annotate_value): Adjust.
	* gcc-interface/trans.c (Attribute_to_gnu): Likewise.
	(push_range_check_info): Likewise.
	(Loop_Statement_to_gnu): Likewise.
	(Subprogram_Body_to_gnu): Likewise.
	(Compilation_Unit_to_gnu): Likewise.
	(start_stmt_group): Likewise.
	* gcc-interface/utils.c (init_gnat_utils): Likewise.
	(gnat_pushlevel): Likewise.
	(maybe_pad_type): Likewise.

2014-05-14  Eric Botcazou  <ebotcazou@adacore.com>

	* seh_init.c: Fix copyright year.

2014-05-14  Bernd Edlinger  <bernd.edlinger@hotmail.de>

	* seh_init.c (__gnat_map_SEH): Compile also when __CYGWIN__ and __SEH__
	are defined.  Move include windows.h before system.h.
	* s-oscons-tmplt.c (DTR_CONTROL_ENABLE, RTS_CONTROL_ENABLE): Compile
	also when __CYGWIN__ is defined.  Include windef.h before winbase.h.

2014-05-14  Richard Sandiford  <r.sandiford@uk.ibm.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity): Convert integer_one_node
	to the appropriate type.
	* gcc-interface/trans.c (gnat_to_gnu): Likewise.
	(pos_to_constructor): Likewise.

2014-05-13  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (annotate_value): Fix thinko in latest change.

2014-05-06  Kenneth Zadeck  <zadeck@naturalbridge.com>
	    Mike Stump  <mikestump@comcast.net>
	    Richard Sandiford  <rdsandiford@googlemail.com>

	* gcc-interface/cuintp.c (UI_From_gnu): Use wide-int interfaces.
	* gcc-interface/decl.c (gnat_to_gnu_entity): Use TYPE_SIGN.
	(annotate_value): Use wide-int interfaces.
	* gcc-interface/utils.c (get_nonnull_operand): Use tree_fits_uhwi_p.

2014-04-28  Richard Henderson  <rth@redhat.com>

	* gcc-interface/Makefile.in: Support aarch64-linux.

2014-04-28  Eric Botcazou  <ebotcazou@adacore.com>

	* exp_dbug.ads (Get_External_Name): Add 'False' default to Has_Suffix,
	add 'Suffix' parameter and adjust comment.
	(Get_External_Name_With_Suffix): Delete.
	* exp_dbug.adb (Get_External_Name_With_Suffix): Merge into...
	(Get_External_Name): ...here.  Add 'False' default to Has_Suffix, add
	'Suffix' parameter.
	(Get_Encoded_Name): Remove 2nd argument in call to Get_External_Name.
	Call Get_External_Name instead of Get_External_Name_With_Suffix.
	(Get_Secondary_DT_External_Name): Likewise.
	* exp_cg.adb (Write_Call_Info): Likewise.
	* exp_disp.adb (Export_DT): Likewise.
	(Import_DT): Likewise.
	* comperr.ads (Compiler_Abort): Remove Code parameter and add From_GCC
	parameter with False default.
	* comperr.adb (Compiler_Abort): Likewise.  Adjust accordingly.
	* types.h (Fat_Pointer): Rename into...
	(String_Pointer): ...this.  Add comment on interfacing rules.
	* fe.h (Compiler_Abort): Adjust for above renaming.
	(Error_Msg_N): Likewise.
	(Error_Msg_NE): Likewise.
	(Get_External_Name): Likewise.  Add third parameter.
	(Get_External_Name_With_Suffix): Delete.
	* gcc-interface/decl.c (STDCALL_PREFIX): Define.
	(create_concat_name): Adjust call to Get_External_Name, remove call to
	Get_External_Name_With_Suffix, use STDCALL_PREFIX, adjust for renaming.
	* gcc-interface/trans.c (post_error): Likewise.
	(post_error_ne): Likewise.
	* gcc-interface/misc.c (internal_error_function): Likewise.

2014-04-28  Richard Biener  <rguenther@suse.de>

	PR middle-end/60092
	* gcc-interface/utils.c: Define flag_isoc11.

2014-04-26  Eric Botcazou  <ebotcazou@adacore.com>

	* gnatvsn.ads (Library_Version): Bump to 4.10.

2014-04-23  Eric Botcazou  <ebotcazou@adacore.com>

	Revert
	2014-04-22  Richard Henderson  <rth@redhat.com>

	* gcc-interface/Makefile.in: Support aarch64-linux.

	2014-04-22  Eric Botcazou  <ebotcazou@adacore.com>

	* fe.h (Compiler_Abort): Replace Fat_Pointer with String_Pointer.
	(Error_Msg_N): Likewise.
	(Error_Msg_NE): Likewise.
	(Get_External_Name_With_Suffix): Likewise.
	* types.h (Fat_Pointer): Delete.
	(String_Pointer): New type.
	(DECLARE_STRING_POINTER): New macro.
	* gcc-interface/decl.c (create_concat_name): Adjust.
	* gcc-interface/trans.c (post_error): Likewise.
	(post_error_ne): Likewise.
	* gcc-interface/misc.c (internal_error_function): Likewise.

2014-04-22  Richard Henderson  <rth@redhat.com>

	* gcc-interface/Makefile.in: Support aarch64-linux.

	* init.c [__linux__] (HAVE_GNAT_ALTERNATE_STACK): New define.
	(__gnat_alternate_stack): Enable for all linux except ia64.

2014-04-22  Eric Botcazou  <ebotcazou@adacore.com>

	* fe.h (Compiler_Abort): Replace Fat_Pointer with String_Pointer.
	(Error_Msg_N): Likewise.
	(Error_Msg_NE): Likewise.
	(Get_External_Name_With_Suffix): Likewise.
	* types.h (Fat_Pointer): Delete.
	(String_Pointer): New type.
	(DECLARE_STRING_POINTER): New macro.
	* gcc-interface/decl.c (create_concat_name): Adjust.
	* gcc-interface/trans.c (post_error): Likewise.
	(post_error_ne): Likewise.
	* gcc-interface/misc.c (internal_error_function): Likewise.

2014-04-15  Eric Botcazou  <ebotcazou@adacore.com>
	    Pierre-Marie de Rodat  <derodat@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <object>: Create a mere
	scalar constant instead of a reference for renaming of scalar literal.
	Do not create a new object for constant renaming except for a function
	call.  Make sure a VAR_DECL is created for the renaming pointer.
	* gcc-interface/trans.c (constant_decl_with_initializer_p): New.
	(fold_constant_decl_in_expr): New function.
	(Identifier_to_gnu): Use constant_decl_with_initializer_p.
	For a constant renaming, try to fold a constant DECL in the result.
	(lvalue_required_p) <N_Object_Renaming_Declaration>: Always return 1.
	(Identifier_to_gnu): Reference the renamed object of constant renaming
	pointers directly.
	* gcc-interface/utils.c (invalidate_global_renaming_pointers): Do not
	invalidate constant renaming pointers.

2014-04-15  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/utils.c (type_for_vector_element_p): New predicate.
	(build_vector_type_for_size): New function.
	(build_vector_type_for_array): Likewise.
	(unchecked_convert): Build an intermediate vector type to convert
	from a generic array type to a vector type.
	(handle_vector_size_attribute): Reimplement.
	(handle_vector_type_attribute): Likewise.

2014-04-15  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (prepend_one_attribute_pragma): Call
	Is_OK_Static_Expression in lieu of Is_Static_Expression to
	detect valid arguments.

2014-04-15  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (gnat_gimplify_stmt): Propagate loop hints.

2014-04-14  Paolo Carlini  <paolo.carlini@oracle.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity): Use TYPE_IDENTIFIER.
	(components_to_record): Likewise.
	* gcc-interface/utils.c (make_aligning_type): Likewise.
	(maybe_pad_type): Likewise.
	(finish_record_type): Likewise.
	(rest_of_record_type_compilation): Likewise.

2014-04-14  Eric Botcazou  <ebotcazou@adacore.com>

	* snames.ads-tmpl (Name_Ivdep): New pragma-related name.
	* sem_prag.adb (Analyze_Pragma) <Pragma_Loop_Optimize>: Add support
	for Ivdep hint.
	* gnat_rm.texi (Implementation Defined Pragmas): Document new Ivdep
	hint for Loop_Optimize.
	* gnat_ugn.texi (Vectorization of loops): Mention new Ivdep hint.
	* gcc-interface/trans.c (Pragma_to_gnu) <Pragma_Loop_Optimize>: Deal
	with new Ivdep hint.
	* gcc-interface/ada-tree.h (LOOP_STMT_IVDEP): New macro.
	* gcc-interface/trans.c (Pragma_to_gnu) <Pragma_Loop_Optimize>: Deal
	with new Ivdep hint.
	(gnat_gimplify_stmt) <LOOP_STMT>: Propagate loop hints.

2014-04-14  Eric Botcazou  <ebotcazou@adacore.com>
	    Robert Dewar  <dewar@adacore.com>

	* opt.ads (Suppress_Back_Annotation): Remove as unused.
	* fe.h (Back_Annotate_Rep_Info): Likewise.
	(Global_Discard_Names): Likewise.
	(List_Representation_Info): Declare.
	* types.h (Uint_Minus_1): Likewise.
	* repinfo.ads: Document back-annotation change.
	* gcc-interface/gigi.h (init_gnat_decl): Declare.
	(destroy_gnat_decl): Likewise.
	* gcc-interface/decl.c (annotate_value): Do not create the cache of
	annotated values here but...
	<CALL_EXPR>: Only inline the call if -gnatR3 is specified or we are
	in ASIS mode.
	(init_gnat_decl): ...here instead.  New function.
	(destroy_gnat_decl): Likewise.
	* gcc-interface/trans.c (gigi): Call {init|destroy}_gnat_decl.
	* gcc-interface/utils.c (init_gnat_utils): Minor reformatting.

2014-04-14  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (create_field_decl_from): Finalize non-constant
	offset for the field, if any.

2014-04-09  Eric Botcazou  <ebotcazou@adacore.com>
	    Svante Signell  <svante.signell@gmail.com>

	PR ada/54040
	PR ada/59346
	* s-osinte-x32.adb: New file.
	* s-linux.ads (Time): New section.
	* s-linux-alpha.ads (Time): Likewise.
	* s-linux-android.ads (Time: Likewise.
	* s-linux-hppa.ads (Time): Likewise.
	* s-linux-mipsel.ads (Time): Likewise.
	* s-linux-sparc.ads (Time): Likewise.
	* s-linux-x32.ads (Time): Likewise.
	* s-osprim-x32.ads (timespec): Adjust.
	(Clock): Likewise.
	(To_Timespec): Likewise.
	* s-osinte-linux.ads (Time): Define local subtypes for those defined
	in System.Linux.
	* s-taprop-linux.adb (Monotonic_Clock): Do not define timeval.
	* s-osinte-hpux.ads (timespec): Revert POSIX breakage.
	* s-osinte-kfreebsd-gnu.ads (timespec): Likewise.
	* s-osinte-solaris-posix.ads (timespec): Likewise.
	* s-osinte-posix.adb (To_Timespec): Likewise.
	* gcc-interface/Makefile.in (x32/Linux): Use s-osinte-x32.adb.

2014-04-08  Eric Botcazou  <ebotcazou@adacore.com>

	PR ada/60411
	* gcc-interface/Makefile.in (arm% linux-android): Switch to EHABI.
	* s-linux-android.ads: New file.
	* s-intman-android.adb: Likewise.
	* s-osinte-android.ads: Adjust.
	* sigtramp-armdroid.c: Likewise.
	* sigtramp.h: Add Android support.

2014-04-07  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/Makefile.in (alpha-vms): Add missing line.

2014-03-30  Eric Botcazou  <ebotcazou@adacore.com>

	PR ada/60703
	* system-linux-alpha.ads: Adjust for Ada 2005.
	* system-linux-mips.ads: Likewise.
	* system-linux-mips64el.ads: Likewise.
	* system-linux-mipsel.ads: Likewise.
	* system-linux-s390.ads: Likewise.
	* system-linux-s390x.ads: Likewise.
	* system-linux-sparc.ads: Likewise.
	* system-linux-sparcv9.ads: Likewise.
	* system-rtems.ads: Likewise.
	* system-vxworks-arm.ads: Likewise.

2014-03-16  Andreas Schwab  <schwab@linux-m68k.org>

	PR ada/39172
	* gcc-interface/Makefile.in (target_cpu_default): Revert
	2013-10-11 change.

2014-03-13  Eric Botcazou  <ebotcazou@adacore.com>

	PR ada/51483
	* cstand.adb (Register_Float_Type): Add 'precision' parameter and use
	it to set the RM size.  Use directly 'size' for the Esize.
	(Create_Back_End_Float_Types): Adjust call to above.
	* get_targ.ads (Register_Type_Proc): Add 'precision' parameter.
	* set_targ.ads (FPT_Mode_Entry): Add 'precision' component.
	(Write_Target_Dependent_Values): Adjust comment.
	* set_targ.adb (Register_Float_Type): Add 'precision' parameter and
	deal with it.
	(Write_Target_Dependent_Values): Write the precision in lieu of size.
	(Initialization): Read the precision in lieu of size and compute the
	size from the precision and the alignment.
	* gcc-interface/gigi.h (enumerate_modes): Add integer parameter.
	* gcc-interface/misc.c (enumerate_modes): Likewise.  Do not register
	types for vector modes, pass the size in addition to the precision.

2014-03-10  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/Make-lang.in (ADA_DEPFILES): Fix typo.

2014-03-07  Doug Rupp  <rupp@adacore.com>

	PR ada/60411
	* system-linux-armel.ads (Backend_Overflow_Checks): Set to True.
	(Support_64_Bit_Divides): Removed, no longer used.
	(ZCX_By_Default): Enabled.

2014-02-25  Doug Rupp  <rupp@adacore.com>

	* gcc-interface/Makefile.in (arm-linux):
	(EH_MECHANISM): Use ARM unwinder (-arm)
	(LIBGNAT_TARGET_PAIRS: Override defaults with a-exexpr-gcc.adb and
	s-excmac-arm.ads.
	(EXTRA_LIBGNAT_OBJS): Add raise-gcc.o
	(EXTRA_GNATRTL_NONTASKING_OBJS): Add g-cppexc.o s-excmac.o.
	(arm-wrs-vxworks): Add EH_MECHANISM=-gcc for kernel mode.
	(EXTRA_LIBGNAT_OBJS): Add sigtramp-armvxw.o
	Add dependencies for sigtramp-armvxw.o.

2014-02-25  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/trans.c (Pragma_to_gnu): Deal with Warning_As_Error.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* rtsfind.adb (Is_RTE): Protect against entity with no scope
	field (previously this call blew up on the Standard entity).
	* sem_attr.adb (Analyze_Attribute, case Access): Remove
	test for No_Abort_Statements, this is now handled in
	Set_Entity_With_Checks.
	* exp_ch6.adb, sem_ch10.adb, sem_ch4.adb, sem_ch8.adb, sem_res.adb:
	Change name Set_Entity_With_Style_Check => Set_Entity_With_Checks.
	* sem_util.ads, sem_util.adb: Change name Set_Entity_With_Style_Check =>
	Set_Entity_With_Checks.
	(Set_Entity_With_Checks): Add checks for No_Dynamic_Attachment,
	Add checks for No_Abort_Statements.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* exp_ch9.adb (Expand_Entry_Barrier): Add comment that call to
	Check_Restriction is OK.

2014-02-25  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Process_Full_View): Better error message when
	the full view of  a private type without discriminants is an
	unconstrained type.
	* sem_ch7.adb (Uninstall_Declarations): Ditto.

2014-02-25  Eric Botcazou  <ebotcazou@adacore.com>

	* sigtramp-armvxw.c: Also restore r0.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* errout.adb (Error_Msg_Internal): Warning_Msg_Char set
	unconditionally (Set_Msg_Insertion_Warning): Warning_Msg_Char
	set unconditionally.
	* erroutc.adb (Get_Warning_Tag): Does not give a leading space
	any more (Output_Msg_Text): Rewritten with new convention on
	output of warnings that are treated as errors.
	* erroutc.ads (Error_Msg_Object): Warn_Chr is always set even
	if Warn is False.
	* gnat_rm.texi: Updates to documentation on pragma
	Warning_As_Error.
	* warnsw.adb (Set_Dot_Warning_Switch): -gnatw.e should not
	set Warning_Doc_Switch.
	* lib-writ.ads: Add documentation note on ALI file generation
	for C.
	* exp_ch6.adb (Expand_Call): Remove check for No_Abort_Statements
	(belongs in Sem).
	* sem_attr.adb (Resolve_Attribute, case Access):
	Abort_Task'Access violates the No_Abort_Statements restriction.
	* sem_res.adb (Resolve_Call): Check restriction
	No_Abort_Statements for call to Abort_Task or a renaming of it.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb (Array_Type_Declaration): Check for case of using
	type name as index.
	* lib.ads: Minor reformatting.
	* einfo.ads: Minor reformatting.

2014-02-25  Doug Rupp  <rupp@adacore.com>

	* sem_mech.adb (Set_Mechanisms): For convention Fortran on VMS
	use Short_Descriptor(S) as the argument passing mechanism.

2014-02-25  Eric Botcazou  <ebotcazou@adacore.com>

	* sigtramp-ppcvxw.c (CFI_COMMON_REGS): Also include r0.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* atree.ads (Warnings_Treated_As_Errors): New variable.
	* errout.adb (Error_Msg_Internal): Set Warn_Err flag in
	error object (Initialize): Initialize Warnings_As_Errors_Count
	(Write_Error_Summary): Include count of warnings treated as errors.
	* erroutc.adb (Warning_Treated_As_Error): New function.
	(Matches): Function moved to outer level of package.
	* erroutc.ads (Error_Msg_Object): Add Warn_Err flag.
	(Warning_Treated_As_Error): New function.
	* gnat_rm.texi: Document pragma Treat_Warning_As_Error.
	* opt.adb: Add handling of Warnings_As_Errors_Count[_Config].
	* opt.ads (Config_Switches_Type): Add entry for
	Warnings_As_Errors_Count.
	(Warnings_As_Errors_Count): New variable.
	(Warnings_As_Errors): New array.
	* par-prag.adb: Add dummy entry for Warning_As_Error.
	* sem_prag.adb (Analyze_Pragma): Implement new pragma
	Warning_As_Error.
	* snames.ads-tmpl: Add entries for Warning_As_Error pragma.

2014-02-25  Eric Botcazou  <ebotcazou@adacore.com>

	* sigtramp.h: Fix minor inaccuracy.

2014-02-25  Ben Brosgol  <brosgol@adacore.com>

	* gnat_ugn.texi: Added description of kill command.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi (Address_Clauses): Add a section discussing the
	problem of address clauses causing unexpected initialization,
	including the effect of Initialize_Scalars.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* errout.adb: Various changes for better msgs for anonmous access
	subprogram types.
	* erroutc.ads, erroutc.adb (Buffer_Ends_With): Version with character
	argument.
	(Buffer_Remove): Version with character argument.
	* sem_attr.adb (Resolve_Attribute, case Access): Better handling
	of mismatching conventions for access-to-subprogram case.
	* sem_prag.adb (Set_Convention_From_Pragma): Deal with anonymous
	access types in record.
	* sem_util.ads, sem_util.adb (Set_Convention): Handle anonymous access
	types, including in records.

2014-02-25  Doug Rupp  <rupp@adacore.com>

	* sigtramp-ppcvxw.c, sigtramp.h, sigtramp-armvxw.c: Comment
	enhancements and corrections.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: New section "Conventions and Anonymous Access Types"

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: First set of documentation additions for
	predefined RM units.
	* checks.adb: Minor reformatting.
	* sem_elab.adb (Check_Task_Activation): Minor fix to error
	message.
	* sem_util.adb: Minor reformatting.

2014-02-25  Arnaud Charlet  <charlet@adacore.com>

	* usage.adb (Usage): Add help on -gnateC.
	* switch-c.adb (Scan_Front_End_Switches): Add handling of -gnateC.
	* opt.ads (Generate_CodePeer_Messages): New flag.
	* gnat_ugn.texi: Document new switch -gnateC.

2014-02-25  Ben Brosgol  <brosgol@adacore.com>

	* gnat_rm.texi: Corrected minor typos in Implementation Defined
	Aspects.
	* opt.ads: Minor reformatting.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* binde.adb: Change messages to mention -gnatel instead of -gnatwl.
	* gnat_ugn.texi: Update documentation of -gnatwl Add documentation
	of -gnatel/-gnateL.
	* opt.ads (Warn_Info_Messages): New flag.
	* sem_elab.adb: Use Elab_Warnings, Elab_Info_Messages to control
	messages.
	* sem_prag.adb: Use Elab_Warnings, Elab_Info_Messages to control
	messages.
	* switch-m.ad, switch-c.adb: Recognize new -gnatel/EL switches.
	* usage.adb: Add documentation of -gnatel/-gnateL Update
	documentation of -gnatwl/-gnatwL.
	* warnsw.adb: New handling of Elab_Warnings, Elab_Info_Messages
	* warnsw.ads (Elab_Info_Messages): New field in Warning_Record

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* einfo.ads, einfo.adb (Has_Shift_Operator): New flag.
	* gnat_rm.texi: Document pragma Provide_Shift_Operators.
	* interfac.ads: Minor code reorganization (add pragma
	Compiler_Unit_Warning).
	* par-prag.adb: Add dummy entry for Provide_Shift_Operators.
	* sem_ch3.adb (Build_Derived_Numeric_Type): Copy
	Has_Shift_Operator flag.
	* sem_intr.adb (Check_Intrinsic_Subprogram): Make sure
	Check_Shift is always called (Check_Shift): Set Has_Shift_Operator.
	* sem_prag.adb: Implement pragma Provide_Shift_Operators.
	* snames.ads-tmpl: Add entries for pragma Provide_Shift_Operators
	Add entry for Name_Amount.
	* checks.adb (Selected_Range_Checks): When checking for a null
	range, make sure we use the base type, and not the subtype for
	deciding a range is null.
	* sem_ch5.adb (Analyze_Loop_Parameter_Specification): Check
	for suspicious loop bound which is outside the range of the
	loop subtype.
	* gnat_ugn.texi: Add documentation section "Determining the
	Chosen Elaboration Order"
	* sem_ch13.adb (UC_Entry): Add field Act_Unit
	(Validate_Unchecked_Conversion): Store Act_Unit
	(Validate_Unchecked_Conversions): Test Warnings_Off in Act_Unit
	* treepr.adb: Minor reformatting.

2014-02-25  Arnaud Charlet  <charlet@adacore.com>

	* usage.adb: Minor: fix typo.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* lib.ads, s-bitops.adb, s-bitops.ads, s-conca5.adb, gnat_rm.texi,
	s-conca5.ads, s-conca7.adb, s-conca7.ads, s-crc32.adb, s-crc32.ads,
	s-conca9.adb, s-conca9.ads, g-dyntab.adb, s-crtl.ads, g-dyntab.ads,
	s-excdeb.adb, s-addope.adb, s-addope.ads, s-carun8.adb, s-carun8.ads,
	g-htable.adb, g-htable.ads, g-hesora.adb, g-hesora.ads, s-conca2.adb,
	s-conca2.ads, a-comlin.adb, a-chlat1.ads, a-comlin.ads, errout.ads,
	a-except.adb, s-conca4.adb, a-except.ads, s-conca4.ads, s-conca6.adb,
	s-conca6.ads, g-spchge.adb, g-spchge.ads, g-u3spch.adb, g-u3spch.ads,
	a-strhas.ads, restrict.adb, aspects.adb, aspects.ads, s-conca8.adb,
	s-conca8.ads, back_end.adb, par-prag.adb, g-byorma.adb, g-byorma.ads,
	a-elchha.adb, a-elchha.ads, g-speche.adb, g-speche.ads, s-casuti.adb,
	s-assert.adb, s-casuti.ads, s-assert.ads, a-clrefi.adb, a-clrefi.ads,
	s-conca3.adb, s-conca3.ads, a-ioexce.ads: Implement pragma
	Compiler_Unit_Warning, change Compiler_Unit everywhere to
	Compiler_Unit_Warning.

2014-02-25  Sergey Rybin  <rybin@adacore.com frybin>

	* sem_prag.adb (Analyze_Depends_In_Decl_Part): Do not normalize
	in ASIS mode aggregates that are used as aspect definitions.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* exp_ch7.adb, sem_util.adb, sem_util.ads, exp_ch6.adb: Minor
	reformatting.

2014-02-25  Ed Schonberg  <schonberg@adacore.com>

	* freeze.adb (Freeze_Entity): If the return type of a function
	is a limited view, and the non-limited view has not been seen yet,
	defer freezing to some later point.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb: Minor reformatting.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* s-excdeb.ads, s-except.ads, s-exctab.adb, s-exctab.ads, s-finmas.ads,
	s-htable.adb, s-htable.ads, s-imenne.adb, s-imenne.ads, s-imgenu.adb,
	s-imgenu.ads, s-mastop.adb, s-mastop.ads, s-memory-vms_64.adb,
	s-memory-vms_64.ads, s-memory.adb, s-memory.ads, s-os_lib.adb,
	s-os_lib.ads, s-parame.adb, s-parame.ads, s-purexc.ads, s-restri.adb,
	s-restri.ads, s-rident.ads, s-secsta.adb, s-secsta.ads, s-soflin.adb,
	s-soflin.ads, s-sopco3.adb, s-sopco3.ads, s-sopco4.adb, s-sopco4.ads,
	s-sopco5.adb, s-sopco5.ads, s-spsufi.ads, s-stache.adb, s-stache.ads,
	s-stalib.adb, s-stalib.ads, s-stoele.adb, s-stoele.ads, s-strcom.adb,
	s-strcom.ads, s-strhas.adb, s-string.adb, s-string.ads, s-strops.adb,
	s-strops.ads, s-ststop.adb, s-ststop.ads, s-traceb.adb, s-traceb.ads,
	s-traent.adb, s-traent.ads, s-unstyp.ads, s-utf_32.adb, s-utf_32.ads,
	s-wchcnv.adb, s-wchcnv.ads, s-wchcon.adb, s-wchcon.ads, s-wchjis.adb,
	s-wchjis.ads, sem_ch11.adb, sem_ch4.adb, sem_ch5.adb, sem_prag.adb,
	snames.ads-tmpl: Change Compiler_Unit everywhere to
	Compiler_Unit_Warning.

2014-02-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch6.adb (Add_Or_Save_Precondition): New routine.
	(Collect_Body_Postconditions_In_Decls): New routine.
	(Collect_Body_Postconditions_Of_Kind): Factor out code. Handle
	postcondition aspects or pragmas that appear on a subprogram
	body stub.
	(Collect_Spec_Preconditions): Factor out code. Handle
	precondition aspects or pragmas that appear on a subprogram
	body stub.
	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): The analysis of
	aspects that apply to a subprogram body stub is no longer delayed,
	the aspects are analyzed on the spot.
	(SPARK_Aspect_Error):
	Aspects that apply to a subprogram declaration cannot appear in
	a subunit.
	* sem_ch10.adb Remove with and use clause for Sem_Ch13.
	(Analyze_Proper_Body): Add local variable Comp_Unit. Unum
	is now a local variable. Code cleanup. Analysis related to
	the aspects of a subprogram body stub is now carried out by
	Analyze_Subprogram_Body_Helper. Do not propagate the aspects
	and/or pragmas of a subprogram body stub to the proper body
	as this is no longer needed. Do not analyze the aspects of a
	subprogram stub when the corresponding source unit is missing.
	(Analyze_Protected_Body_Stub): Flag the illegal use of aspects
	on a stub.
	(Analyze_Task_Body_Stub): Flag the illegal use of
	aspects on a stub.
	(Optional_Subunit): Add local variable Unum.
	* sem_ch13.adb (Insert_Delayed_Pragma): Do not analyze a generated
	pragma when it applies to a subprogram body stub.
	* sem_prag.adb (Analyze_Pragma): Pragmas Contract_Cases,
	Depends and Global can now apply to a subprogram body stub as
	long as it acts as its own spec.
	(Analyze_Refined_Pragma):
	Code reformatting. Refinement pragmas cannot apply to a subunit.

2014-02-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.ads Update the usage of flag
	Uses_Sec_Stack. Uses_Sec_Stack now applies to E_Loop entities.
	* exp_ch5.adb (Expand_Iterator_Loop): The temporary for a cursor
	now starts with the letter 'C'. This makes reading expanded
	code easier.
	* exp_ch7.adb (Establish_Transient_Scope): Add local variable
	Iter_Loop. Signal that an Ada 2012 iterator loop requires
	secondary stack management when creating a transient scope for
	an element reference.
	* exp_util.adb (Process_Statements_For_Controlled_Objects):
	When wrapping the statements of a loop, pass the E_Loop entity
	to the wrapping machinery.
	(Wrap_Statements_In_Block): Add
	formal parameter Scop along with comment on usage. Add local
	variables Block_Id, Block_Nod and Iter_Loop. Mark the generated
	block as requiring secondary stack management when the block is
	created inside an Ada 2012 iterator loop. This ensures that any
	reference objects are reclaimed on each iteration of the loop.
	* sem_ch5.adb (Analyze_Loop_Statement): Mark the generated block
	tasked with the handling of container iterators as requiring
	secondary stack management. This ensures that iterators are
	reclaimed when the loop terminates or is exited in any fashion.
	* sem_util.adb (Add_Block_Identifier): New routine.
	(Find_Enclosing_Iterator_Loop): New routine.
	* sem_util.ads (Add_Block_Identifier): New routine.
	(Find_Enclosing_Iterator_Loop): New routine.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* sinfo.ads: Minor reformatting.

2014-02-25  Tristan Gingold  <gingold@adacore.com>

	* s-expllu.ads, s-expuns.ads, s-expmod.ads: Minor comment fix.

2014-02-25  Pascal Obry  <obry@adacore.com>

	* sinput-l.adb, osint.adb, osint.ads: Add Prep_Suffix to factorize code.

2014-02-25  Tristan Gingold  <gingold@adacore.com>

	* sem_ch10.adb: Minor comment fix.

2014-02-25  Bob Duff  <duff@adacore.com>

	* s-tasdeb.adb: Misc cleanup of this package,
	including printing addresses in hexadecimal.
	(Write): Fix minor bug when taking 'Address of an empty string.

2014-02-25  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Analyze_Part_Of): Reject state refinement in a
	public child unit when it does not refer to the abstract state
	of a public ancestor.

2014-02-25  Yannick Moy  <moy@adacore.com>

	* sem_prag.adb (Analyze_Pragma/Pragma_Validity_Checks): Ignore pragma
	Validity_Checks in GNATprove and CodePeer modes.

2014-02-25  Pascal Obry  <obry@adacore.com>

	* prj-attr.adb, projects.texi, snames.ads-tmpl: Add package Install's
	Artifacts attribute.

2014-02-25  Yannick Moy  <moy@adacore.com>

	* sem_prag.adb: Minor reformatting to get consistent messages.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* checks.adb: Minor reformatting.
	* sinfo.ads (Do_Range_Check): Document that this flag is never
	passed to the back end.

2014-02-25  Yannick Moy  <moy@adacore.com>

	* sem_ch3.adb, sem_ch5.adb, sem_ch9.adb, sem_prag.adb, sem_attr.adb,
	sem_ch6.adb: Remove useless references to SPARK RM in error messages.

2014-02-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_res.adb (Appears_In_Check): New routine.
	(Resolve_Entity_Name): Remove local variables Prev and
	Usage_OK. Par is now a constant. Remove the parent chain traversal
	as the placement of a volatile object with enabled property
	Async_Writers and/or Effective_Reads must appear immediately
	within a legal construct.

2014-02-25  Hristian Kirtchev  <kirtchev@adacore.com>

	* checks.adb (Apply_Selected_Range_Checks):
	Alphabetize local constants and variables. Add comments.
	Always insert a range check that requires runtime evaluation into
	the tree.

2014-02-25  Robert Dewar  <dewar@adacore.com>

	* sem_attr.adb, sem_ch6.adb, par-ch3.adb: Minor reformatting.

2014-02-25  Bob Duff  <duff@adacore.com>

	* s-tassta.adb (Finalize_Global_Tasks): Limit the number of loop
	iterations while waiting for independent tasks to terminate;
	if an independent task does not terminate, we do not want to
	hang here. In that case, the thread will be terminated when the
	process exits.
	* s-taprop-linux.adb (Abort_Task): Fix Assert to allow for ESRCH.

2014-02-25  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Check_SPARK_Aspect_For_ASIS): New subprogram,
	used to perform pre-analysis of the expression for SPARK
	aspects that have a non-standard syntax, such as GLobal and
	Initializes. The procedure applies to the original expression
	in an aspect specification, prior to the analysis of the
	corresponding pragma, in order to provide semantic information
	for ASIS navigation purposes.
	(Analyze_Global_In_Decl_List, Analyze_Initializes_In_Decl_Part):
	Call new subprogram.

2014-02-25  Yannick Moy  <moy@adacore.com>

	* sem_prag.adb: Remove obsolete reference to SPARK RM in error message.

2014-02-25  Doug Rupp  <rupp@adacore.com>

	* init.c (HAVE_GNAT_ADJUST_CONTEXT_FOR_RAISE): Enable for ARM.
	(__gnat_adjust_context_for_raise): Bump the PC by 2.

2014-02-25  Ed Schonberg  <schonberg@adacore.com>

	* par-ch3.adb (P_Basic_Declarative_Items): In the case of a
	misplaced IS, add a statement sequence to improper body only if
	one has not been parsed already.

2014-02-25  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Analyze_Attribute, case 'Update): Check for
	mismatch when multidimensional array is updated with a single
	index.

2014-02-25  Yannick Moy  <moy@adacore.com>

	* sem_ch3.adb, sem_ch5.adb, sem_prag.adb, sem_attr.adb, errout.ads,
	sem_ch6.adb: Mark most references to SPARK RM in error messages
	for removal.

2014-02-24  Ed Schonberg  <schonberg@adacore.com>

	* par-ch3.adb (P_Basic_Declarative_Items): If an improper body
	appears in a list of basic declarations, complete the tree with
	an empty statement list, to prevent cascaded errors and crashes
	if semantic analysis is attempted.

2014-02-24  Thomas Quinot  <quinot@adacore.com>

	* g-sercom-mingw.adb (Open): Fix incorrect test for error return
	value.
	* erroutc.adb: Minor reformatting.

2014-02-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Check_Clause_Syntax): Account
	for a solitary input item in a dependency list.

2014-02-24  Yannick Moy  <moy@adacore.com>

	* gnat1drv.adb (Adjust_Global_Switches): Do not
	use validity checks at all in GNATprove_Mode.

2014-02-24  Robert Dewar  <dewar@adacore.com>

	* g-sercom-mingw.adb, g-sercom-linux.adb, sem_prag.adb, freeze.adb,
	atree.adb, atree.ads: Minor reformatting.

2014-02-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Contract): Do not enforce
	global and dependence refinement when SPARK_Mode is off.
	* sem_ch7.adb (Analyze_Package_Body_Contract): Do not enforce
	state refinement when SPARK_Mode is off.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Add local
	variable Decl. Insert the generated pragma for Refined_State
	after a potential pragma SPARK_Mode.
	* sem_prag.adb (Analyze_Depends_In_Decl_Part): Add local
	constant Deps. Remove local variable Expr. Check the syntax
	of pragma Depends when SPARK_Mode is off. Factor out the
	processing for extra parenthesis around individual clauses.
	(Analyze_Global_In_Decl_List): Items is now a constant. Check
	the syntax of pragma Global when SPARK_Mode is off.
	(Analyze_Initializes_In_Decl_Part): Check the syntax of pragma
	Initializes when SPARK_Mode is off.
	(Analyze_Part_Of): Check
	the syntax of the encapsulating state when SPARK_Mode is off.
	(Analyze_Pragma): Check the syntax of pragma Abstract_State when
	SPARK_Mode is off. Move the declaration order check with respect
	to pragma Initializes to the end of the processing. Do not verify
	the declaration order for pragma Initial_Condition when SPARK_Mode
	is off. Do not complain about a useless package refinement when
	SPARK_Mode is off.
	(Analyze_Refined_Depends_In_Decl_Part): Refs
	is now a constant. Check the syntax of pragma Refined_Depends
	when SPARK_Mode is off.
	(Analyze_Refined_Global_In_Decl_Part):
	Check the syntax of pragma Refined_Global when SPARK_Mode is off.
	(Analyze_Refined_State_In_Decl_Part): Check the syntax of pragma
	Refined_State when SPARK_Mode is off.
	(Check_Dependence_List_Syntax): New routine.
	(Check_Global_List_Syntax): New routine.
	(Check_Initialization_List_Syntax): New routine.
	(Check_Item_Syntax): New routine.
	(Check_State_Declaration_Syntax): New routine.
	(Check_Refinement_List_Syntax): New routine.
	(Has_Extra_Parentheses): Moved to the top level of Sem_Prag.

2014-02-24  Robert Dewar  <dewar@adacore.com>

	* a-tags.adb, s-os_lib.adb: Minor reformatting.

2014-02-24  Thomas Quinot  <quinot@adacore.com>

	* g-sercom-mingw.adb, g-sercom-linux.adb (Raise_Error): Include
	strerror message, not just numeric errno value.

2014-02-24  Doug Rupp  <rupp@adacore.com>

	* raise-gcc.c (exception_class_eq): Make endian neutral.

2014-02-24  Ed Schonberg  <schonberg@adacore.com>

	* atree.ads, atree,adb (Copy_Separate_Tree): Remove Syntax_Only
	flag, and reset Etype and Analyzed attributes unconditionally
	when copying a tree that may be partly analyzed.
	* freeze.adb: Change calls to Copy_Separate_Tree accordingly.
	* sem_ch6.adb (Check_Inline_Pragma): If the Inline pragma appears
	within a subprogram body and applies to it, remove it from the
	body before making a copy of it, to prevent spurious errors when
	analyzing the copied body.

2014-02-24  Thomas Quinot  <quinot@adacore.com>

	* s-os_lib.adb (Errno_Message): Do not depend on Integer'Image.
	* s-oscons-tmplt.c: On VxWorks, include adaint.h only after
	vxWorks.h has been included.  Also ensure that file attributes
	related definitions are output even in cases where socket support
	is not enabled.
	* a-tags.adb: Code clean up.
	* Make-generated.in (OSCONS_CPP, OSCONS_EXTRACT): Use -iquote
	instead of -I to add the main ada source directory to the header
	search path, in order to avoid conflict between our own "types.h"
	and VxWork's <types.h>.

2014-02-24  Robert Dewar  <dewar@adacore.com>

	* atree.ads, atree.adb (Copy_Separate_Tree): Add Syntax_Only parameter.
	* debug.adb: Remove documentation of -gnatd.X, no longer used.
	* freeze.adb (Wrap_Imported_Subprogram): Fixed and activated.

2014-02-24  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Improve documentation of gnatpp.

2014-02-24  Thomas Quinot  <quinot@adacore.com>

	* g-stheme.adb, g-socthi-vms.adb, g-socthi-vms.ads,
	g-socthi-vxworks.adb, g-socthi-vxworks.ads, g-stseme.adb,
	g-socthi-mingw.adb, g-socthi-mingw.ads, g-socthi.adb,
	g-socthi.ads, g-socket.adb (Host_Error_Message): Return a string, not
	a chars_ptr, because on Windows this is a renaming of
	Socket_Error_Message.

2014-02-24  Robert Dewar  <dewar@adacore.com>

	* a-direct.adb, sem_ch5.adb, a-cfdlli.adb, a-cfhase.adb, a-tags.adb,
	s-filatt.ads, a-cforma.adb, sem_ch6.adb, g-socthi-mingw.adb,
	a-cfhama.adb, a-cforse.adb, a-cofove.adb: Minor reformatting and code
	reorganization.

2014-02-24  Thomas Quinot  <quinot@adacore.com>

	* Make-generated.in (OSCONS_CPP, OSCONS_EXTRACT): Make sure
	that the source directory containing s-oscons-tmplt.c is on the
	include path, so that all internal header files are available.

2014-02-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Loop_Parameter_Specification): If the
	domain of iteration is an attribute reference 'Old, this is an
	Ada 2012 iterator and the loop must be rewritten as such.

2014-02-24  Thomas Quinot  <quinot@adacore.com>

	* s-fileio.adb (Errno_Message): Remove, use shared version from
	s-os_lib instead.
	* s-crtrun.ads, Makefile.rtl: Remove now unused unit.
	* g-stseme (Socket_Error_Message): Reimplement in terms of new
	s-os_lib function.
	* g-socthi.ads, g-socthi.adb: Change profile of
	Socket_Error_Message to return String to allow the above.
	* g-socket.adb, g-socthi-mingw.adb, g-socthi-mingw.ads,
	* g-socthi-vms.adb, g-socthi-vms.ads, g-socthi-vxworks.adb,
	* g-socthi-vxworks.ads: Update to account for the above profile
	change.
	* a-tags.adb: Use strlen builtin binding provided by s-crtl.
	* s-crtl.ads (strncpy): New procedure.
	* s-os_lib.adb (Copy_Attributes): Import just once (strncpy):
	Use import from s-crtl.
	* a-envvar.adb, osint.adb: Use imports of C runtime functions
	from s-crtl instead of re-importing locally.

2014-02-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Global_Item): Emit the
	variable related checks concerning volatile objects only when
	SPARK_Mode is on.

2014-02-24  Robert Dewar  <dewar@adacore.com>

	* sem_ch5.adb (Analyze_Iterator_Specification): use
	Error_Msg_Ada_2012_Feature.

2014-02-24  Jose Ruiz  <ruiz@adacore.com>

	* s-rident.ads (Profile_Info): For Ravenscar, the restrictions
	No_Local_Timing_Events and No_Specific_Termination_Handlers
	must be set, according to the Ravenscar profile definition
	in D.13(6/3).

2014-02-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Expression_Function): If this is a
	completion, freeze return type and its designated type if needed.

2014-02-24  Thomas Quinot  <quinot@adacore.com>

	* sem_ch13.adb (Analyze_Attribute_Definition_Clause, case
	'Address): When moving initialization statements to a freeze
	entity, keep them under a single node (i.e. do not unwrap
	expressions with actions), and set the Initialization_Statements
	attribute again so that processing of a later pragma Import can
	still remove them.

2014-02-24  Claire Dross  <dross@adacore.com>

	* a-cfdlli.adb, a-cfdlli.ads, a-cfhama.adb, a-cfhama.ads,
	a-cfhase.adb, a-cfhase.ads, a-cforma.adb, a-cforma.ads,
	a-cforse.adb, a-cforse.ads, a-cofove.adb, a-cofove.ads: Rename
	Left/Right to First_To_Previous/Current_To_Last.

2014-02-24  Thomas Quinot  <quinot@adacore.com>

	* adaint.h (struct file_attributes): New component "error"
	(__gnat_error_attributes): Accessor for the above.
	* adaint.c (__gnat_error_attributes): New subprogram
	(__gnat_stat): Fix returned value (expect errno value)
	(__gnat_stat_to_attr): Add management of error component (set to
	stat errno value, except for missing files where it is set to 0,
	and exists is set to 0).
	* osint.ads (File_Attributes_Size): Update per change above,
	also clarify documentation.
	* s-filatt.ads: New file, binding to file attributes related
	functions.
	* Makefile.rtl (s-filatt): New runtime unit.
	* s-crtl.ads (strlen): Expose binding to GCC builtin (falls back
	to library function if not available on target).
	* s-os_lib.ads, s-os_lib.adb (Errno_Message): New subprogram.
	* s-oscons-tmplt.c (SIZEOF_struct_file_attributes,
	SIZEOF_struct_dirent_alloc): New constants.
	* Make-generated.in (s-oscons.ads): Now requires adaint.h.
	* a-direct.adb (Fetch_Next_Entry): Fix incorrect buffer sizes.
	Perform appropriate error checking if stat fails (do not just
	ignore existing files if stat fails)
	* gcc-interface/Make-lang.in (GNAT_ADA_OBJS, GNATBIND_OBJS): Update
	dependencies.

2014-02-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Global_Item): Move the check concerning
	the use of volatile objects as global items in a function to
	the variable related checks section.
	* sem_util.adb (Async_Readers_Enabled): Directly call
	Has_Enabled_Property.
	(Async_Writers_Enabled): Directly call Has_Enabled_Property.
	(Effective_Reads_Enabled): Directly call Has_Enabled_Property.
	(Effective_Writes_Enabled): Directly call Has_Enabled_Property.
	(Has_Enabled_Property): Rename formal parameter State_Id to Item_Id.
	Update the comment on usage. State_Has_Enabled_Property how handles
	the original logic of the routine. Add processing for variables.
	(State_Has_Enabled_Property): New routine.
	(Variable_Has_Enabled_Property): New routine.

2014-02-24  Robert Dewar  <dewar@adacore.com>

	* sinfo.ads, sem_ch12.adb, sem_res.adb, sem_ch4.adb, par-ch12.adb:
	Minor reformatting.
	* atree.ads, atree.adb (Node35): New function.
	(Set_Node35): New procedure.
	* debug.adb: Define new debug flag -gnatd.X.
	* einfo.ads, einfo.adb (Import_Pragma): New field.
	* freeze.adb (Wrap_Imported_Procedure): New procedure (not
	really active yet, has to be activated with -gnatd.X.
	* sem_prag.adb (Set_Imported): Set new Import_Pragma
	field (Set_Imported): Don't set Is_Public (see
	Freeze.Wrap_Imported_Subprogram)
	* par-ch3.adb (P_Component_List): Handle unexpected null component.

2014-02-24  Yannick Moy  <moy@adacore.com>

	* sem_ch3.adb: Correct reference to SPARK RM in error messages.
	* gnat_rm.texi: Correct documentation of attribute Update.

2014-02-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Iterator_Specification): Reject container
	iterator in older versions of Ada.

2014-02-24  Gary Dismukes  <dismukes@adacore.com>

	* sem_ch5.adb, sem_aux.ads, sem_ch12.adb, gnat_ugn.texi, par.adb,
	par-ch12.adb: Change spelling 'parametrization' to 'parameterization'.

2014-02-24  Ed Schonberg  <schonberg@adacore.com>

	* sinfo.ads, sinfo.adb: New attribute Generalized_Indexing, for
	indexed_components that are instances of Ada 2012 container
	indexing operations. Analysis and resolution of such nodes
	is performed on the attribute, and the original source is
	preserved for ASIS operations. If expansion is enabled, the
	indexed component is replaced by the value of this attribute,
	which is in a call to an Indexing aspect, in most case wrapped
	in a dereference operation.
	* sem_ch4.adb (Analyze_Indexed_Component): Create
	Generalized_Indexing attribute when appropriate.
	(Analyze_Call): If prefix is not overloadable and has an indexing
	aspect, transform into an indexed component so it can be analyzed
	as a potential container indexing.
	(Analyze_Expression): If node is an indexed component with a
	Generalized_ Indexing, do not re-analyze.
	* sem_res.adb (Resolve_Generalized_Indexing): Complete resolution
	of an indexed_component that has been transformed into a container
	indexing operation.
	(Resolve_Indexed_Component): Call the above when required.
	(Resolve): Do not insert an explicit dereference operation on
	an indexed_component whose type has an implicit dereference:
	the operation is inserted when resolving the related
	Generalized_Indexing.

2014-02-24  Olivier Ramonat  <ramonat@adacore.com>

	* gnat_rm.texi, gnat_ugn.texi: Replace Ada Compiler by Ada Development
	Environment.

2014-02-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Check_Constituent_Usage): Remove leading spaces in
	error messages.
	(Inconsistent_Mode_Error): Remove leading spaces in error messages.
	Merge the expected and available mode errors.
	(Report_Unused_Constituents): Remove leading spaces in error messages.
	(Report_Unused_States): Remove leading spaces in error messages.

2014-02-24  Thomas Quinot  <quinot@adacore.com>

	* par_sco.adb (Traverse_One): Refine categorization of statement
	SCOs.

2014-02-24  Robert Dewar  <dewar@adacore.com>

	* aspects.ads, aspects.adb: Remove aspects Ada_2005 and Ada_2012,
	Pure_05, Pure_12 and Preelaborate_05.
	* gnat_rm.texi: Update accordingly.
	* sem_prag.adb: Document one argument form of Ada_05/Ada_2005
	pragmas Document one argument form of Ada_12/Ada_2012 pragmas
	Recognize one argument form of these pragmas only in GNAT mode
	(-gnatg).

2014-02-24  Ed Schonberg  <schonberg@adacore.com>

	* s-dimmks.ads: Replace symbol for temperature, previously the
	Greek letter Theta, by the ASCII @ sign.
	* s-diflio.ads: ditto.

2014-02-24  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb: Minor code reorganization (use OR for boolean
	variables).
	* sem_ch3.adb, sem_prag.adb, freeze.adb: Minor reformatting.

2014-02-24  Ben Brosgol  <brosgol@adacore.com>

	* gnat_ugn.texi, projects.texi: Added the necessary conditionalization
	so that references to gnatmem and ASIS tools do not appear in the FSF
	edition of the GNAT User's Guide.

2014-02-24  Yannick Moy  <moy@adacore.com>

	* freeze.adb (Freeze_Entity): Do not issue warning
	for pre/post being ignored on imported subprogram in GNATprove
	mode.

2014-02-24  Robert Dewar  <dewar@adacore.com>

	* exp_ch5.adb, sem_ch5.adb, sem_type.adb, sem_res.adb, sem_attr.adb,
	stand.ads, sem_eval.adb: Minor reformatting.

2014-02-24  Yannick Moy  <moy@adacore.com>

	* sem_prag.adb: Minor rewording in error message.

2014-02-24  Johannes Kanig  <kanig@adacore.com>

	* exp_util.adb (Expand_Subtype_From_Expr): Do not expand subtypes in
	GNATprove_mode, gnat2why doesn't need nor use these types.

2014-02-24  Gary Dismukes  <dismukes@adacore.com>

	* exp_ch4.adb (Expand_N_Op_Expon): On the AAMP
	target, in the case of signed integer exponentiation that uses a
	run-time routine, always select the Exp_* versions, since overflow
	checking is automatically done by AAMP arithmetic instructions.

2014-02-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications):
	When the related context is a package instace, insert pragma
	Abstract_State after all internally-generated renamings related
	to the instance "header".

2014-02-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Analyze_Declarations): Analyze Contract of abstract
	subprograms.
	* sem_disp.adb (Check_Dispatching_Context): A non-dispatching
	call to an abstract subprogram is legal if it appears in a
	pre/postcondition of another abstract operation.

2014-02-24  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi: Misc updates.

2014-02-24  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_prag.adb (Expand_Old): Set the type of the generated temporary.

2014-02-24  Gary Dismukes  <dismukes@adacore.com>

	* layout.adb (Layout_Variant_Record): Instantiate
	Generic_Check_Choices and call Check_Choices before calling
	Build_Discr_Checking_Funcs, since we need Others_Discrete_Choices
	set to prevent generating incorrect discriminant-checking
	functions for 'others' variants (functions that unconditionally
	return True rather than accounting for the values covered by the
	'others' choice).
	* sem_eval.ads (Subtypes_Statically_Compatible): Add formal
	Formal_Derived_Matching.
	(Subtypes_Statically_Match): Add formal Formal_Derived_Matching.
	* sem_eval.adb (Subtypes_Statically_Compatible): Pass new
	Formal_Derived_Matching formal to Subtypes_Statically_Match.
	(Subtypes_Statically_Match): Suppress the Object_Size matching
	test in the case where Formal_Derived_Matching is True.
	* sem_ch12.adb (Validate_Derived_Type_Instance): Pass
	True for Formal_Derived_Matching_Formal on the call to
	Subtypes_Statically_Compatible.

2014-02-23  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/Make-lang.in (ADA_TOOLS_FLAGS_TO_PASS): Robustify.

2014-02-23  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/utils2.c (build_simple_component_ref): Fix formatting.
	Look through a conversion between original and packable version to get
	the base object.
	(build_component_ref): Rework comment and fix formatting.

2014-02-20  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi, vms_data.ads (gnatelim): Add description of
	project-specific options.

2014-02-20  Ed Schonberg  <schonberg@adacore.com>

	* a-cbdlli.adb (Insert): When capacity exceeded, raise Capacity_Error,
	not Constraint_Error.
	* a-cbmutr.adb (Append_Child, Insert_Child, Prepend_Child): Ditto.
	* sem_ch5.adb: Code clean up.

2014-02-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Usage_Error): Remove local
	constant Typ. Remove the specialized diagnostics for unconstrained
	or tagged items as those are not part of the explicit input set
	of the related subprogram and should not be flagged.

2014-02-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb: Add guard to preserve all errors.

2014-02-20  Vincent Celier  <celier@adacore.com>

	* switch-m.adb (Normalize_Compiler_Switches): Take into account
	switches that are recorded in ALI files: -gnateA, -gnateE,
	-gnateF, -gnateinn, -gnateu, -gnateV and -gnateY.

2014-02-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Iterator_Specification): Check legality
	of an element iterator form over a formal container with an
	Iterable aspect.
	* exp_ch5.adb (Build_Formal_Container_Iteration): Utility
	to create declaration and loop statements for both forms of
	container iterators.
	(Expand_Formal_Container_Element_Iterator): New procedure
	to handle loops of the form  "for E of C" when C is a formal
	container.
	(Expand_Formal_Container_Iterator): Code cleanup.

2014-02-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Add_Item_To_Name_Buffer): New routine.
	(Analyze_Contract_Case): Remove the use of
	"may". Replace "aspect Contract_Cases" to avoid categorization
	of aspect vs pragma.
	(Analyze_External_Property_In_Decl_Part): Remove the use of "formal".
	(Analyze_Global_Item): Remove
	the use of "formal", specify the subprogram.  Split the
	error message about a state with visible refinement into
	two. Remove the use of "global" from "volatile global item".
	(Analyze_Initialization_Item): Ensure that the SPARK RM reference
	is on one line.
	(Analyze_Input_Output): Update the call to
	Check_Mode. Specify the duplicated item. Reword the error
	message concerning an input of a null output list. Use "\"
	for error message continuation.
	(Analyze_Part_Of): Remove
	the use of "may". Use "\" for error message continuation.
	(Analyze_Refined_Depends_In_Decl_Part): Update the error
	message concerning a useless refinement to match the format
	of Refined_Global.
	(Analyze_Refined_Global_In_Decl_Part): Reword the error message
	concerning a useless refinement.
	(Analyze_Refinement_Clause): Use "\" for error message continuation.
	(Check_Constituent_Usage): Use "\" for error message continuation.
	(Check_Dependency_Clause): Use "\" for error message continuation.
	(Check_Matching_Constituent): Use "\" for error message continuation.
	(Check_Missing_Part_Of): Use "\" for error message continuation.
	(Check_Mode): Renamed to
	Check_Role. Update the comment on usage. Redo the error reporting
	to use Role_Error.
	(Check_Mode_Restriction_In_Enclosing_Context): Use "\" for error
	message continuation.
	(Find_Mode): Renamed to Find_Role. Update the parameter profile along
	with comment on usage. Update all occurrences of Is_Input and Is_Output.
	(Inconsistent_Mode_Error): Use "\" for error message continuation.
	(Input_Match): Use "\" for error message continuation.
	(Role_Error): New routine.
	(Set_Convention_From_Pragma): Use "\" for error message continuation.
	(Usage_Error): Add local variable Error_Msg. Build specialized error
	message showcasing the offending item kind. Redo the diagnostics for
	unconstrained types.

2014-02-20  Ed Schonberg  <schonberg@adacore.com>

	* exp_util.adb (Is_Iterated_Container): Use high-level primitives
	to determine whether a type is a container type, rather than
	examining only its type declaration, so that subtypes and derived
	types are handled properly.

2014-02-20  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi: gnatmetric: add description of project-specific
	options.

2014-02-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Analyze_Attribute, case 'Update): Verify that
	all choices in an association for a record type have the same
	type, as is done for record aggregates.

2014-02-20  Robert Dewar  <dewar@adacore.com>

	* a-cborma.adb, a-cbhama.adb, a-cbdlli.adb, a-cbmutr.adb: Use pragma
	Unmodified rather than Warnings (Off). Make comments
	uniform in the four affected units.

2014-02-20  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb (Analyze_Attribute_Definition_Clause, case
	Object_Size): For non-scalar types allow any value that is a
	multiple of 8.
	* gnat_rm.texi: Document Object_Size for composites more clearly.

2014-02-20  Yannick Moy  <moy@adacore.com>

	* sem_util.ads, sem_util.adb (Default_Initialization): Remove function.

2014-02-20  Ed Schonberg  <schonberg@adacore.com>

	* stand.ads: Raise_Type: new predefined entity, used as the type
	of a Raise_Expression prior to resolution.
	* cstand.adb: Build entity for Raise_Type.
	* sem_ch11.adb (Analyze_Raise_Expression): use Raise_Type as the
	initial type of the node.
	* sem_type.adb (Covers): Raise_Type is compatible with all
	other types.
	* sem_res.adb (Resolve): Remove special handling of Any_Type on
	Raise_Expression nodes.
	(Resolve_Raise_Expression): Signal ambiguity if the type of the
	context is still Raise_Type.

2014-02-20  Robert Dewar  <dewar@adacore.com>

	* sem_ch12.adb (Validate_Access_Type_Instance): Add message if
	mismatching predicates.
	* sem_ch6.adb (Check_Conformance): Give better messages on
	predicate mismatch.
	* sem_eval.adb (Predicates_Match): Move to spec.
	* sem_eval.ads (Predicates_Match): Moved here from body.

2014-02-20  Ed Schonberg  <schonberg@adacore.com>

	* a-cbmutr.adb: Use default value in Insert_Child.

2014-02-20  Vincent Celier  <celier@adacore.com>

	* gnatcmd.adb, make.adb, prj-makr.adb, clean.adb: Call
	Stringt.Initialize in all project aware tools.

2014-02-20  Doug Rupp  <rupp@adacore.com>

	* gnat_ugn.texi: Document gnatbind -X option.
	* vms_data.ads: Minor warnings documentation reformatting.

2014-02-20  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Expand_Freeze_Array_Type): Only create invariant
	procedure for a base type.

2014-02-20  Robert Dewar  <dewar@adacore.com>

	* sem_ch4.adb (Analyze_Case_Expression): Get type from first
	expression with type info.
	* sem_ch13.adb: Minor reformatting.
	* sem_eval.adb (Subtypes_Statically_Match): Make sure we return
	False if predicates do not match on the two types.

2014-02-20  Arnaud Charlet  <charlet@adacore.com>

	* sem_prag.adb (Analyze_Pragma [pragma Attach_Handler]):
	In Relaxed_RM_Semantics mode, allow any static integer value,
	for compatibility with other compilers.

2014-02-20  Vincent Celier  <celier@adacore.com>

	* errutil.adb (Initialize): Properly initialize entry in table
	Warnings when warnings are suppressed.

2014-02-20  Robert Dewar  <dewar@adacore.com>

	* s-os_lib.ads: Add warning about non-portability of Rename_File.
	* sem_util.ads, sem_util.adb (Is_Junk_Name): New function.
	* sem_warn.adb: Use Is_Junk_Name to suppress some warnings.
	* gnat_ugn.texi: Document no warnings on junk variable names.
	* layout.adb: Minor code reorganization (use Ekind_In).
	* stringt.adb: Move initialization of Null_String_Id to Initialize
	routine.

2014-02-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb: Initialize optional Element_Id.

2014-02-20  Robert Dewar  <dewar@adacore.com>

	* s-os_lib.ads (Rename_File): Minor commment addition.

2014-02-20  Thomas Quinot  <quinot@adacore.com>

	* einfo.ads: Minor reformatting.

2014-02-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.adb (Exchange_Aspects): New routine.
	* aspects.ads (Exchange_Aspects): New routine.
	* atree.adb (Rewrite): Do not check whether the save node has
	aspects as it never will, instead check the node about to be clobbered.
	* einfo.adb (Write_Field25_Name): Abstract_States can appear in
	entities of generic packages.
	* sem_ch6.adb (Analyze_Expression_Function): Fix the parent
	pointer of an aspect specification list after rewriting takes place.
	* sem_ch7.adb (Analyze_Package_Body_Helper): Swap the aspect
	specifications of the generic template and the copy used for analysis.
	* sem_ch12.adb (Analyze_Generic_Package_Declaration): Swap
	the aspect specifications of the generic template and the
	copy used for analysis.
	(Analyze_Package_Instantiation): Propagate the aspect specifications
	from the generic template to the instantiation.
	(Build_Instance_Compilation_Unit_Nodes): Propagate the aspect
	specifications from the generic template to the instantiation.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Handle aspects
	Abstract_State, Initializes and Initial_Condition when they
	apply to a package instantiation.

2014-02-20  Robert Dewar  <dewar@adacore.com>

	* stringt.adb: Add call to Initialize in package initialization.

2014-02-20  Robert Dewar  <dewar@adacore.com>

	* a-crbtgk.adb, a-cihama.adb, a-coinve.adb, a-ciorse.adb, a-crbtgo.adb,
	a-cidlli.adb, a-cimutr.adb, a-cihase.adb, a-cohama.adb, a-coorse.adb,
	a-chtgke.adb, a-chtgop.adb, a-comutr.adb, a-ciorma.adb, a-cobove.adb,
	a-convec.adb, a-cohase.adb, a-chtgbk.adb, a-chtgbo.adb: Minor
	reformatting.

2014-02-20  Bob Duff  <duff@adacore.com>

	* s-os_lib.ads: Minor: Remove incorrect comment.

2014-02-20  Robert Dewar  <dewar@adacore.com>

	* sem_elab.adb (Check_Elab_Assign): Clearer warning message.

2014-02-20  Ed Schonberg  <schonberg@adacore.com>

	* a-cborma.adb (Assign): When creating a node without a specified
	element, insert an uninitialized element in the map, because
	the instance may provide an element type with a default
	initialization, e.g a scalar with a Default_Value aspect.
	* a-cbhama.adb (Assign_Key): Remove useless Allocate procedure.
	(Insert): In the version without explicit element, provide an
	uninitialized element, as above.
	* a-cbdlli.adb (Append): In the version without explicit element,
	provide an uninitalized element, as above.
	(Allocate): Remove unused version.

2014-02-20  Robert Dewar  <dewar@adacore.com>

	* sem_elab.adb: Minor code reorganization (use Nkind_In).
	* stringt.adb: Remove temporary pragma Warnings (Off).
	* stringt.ads: Add pragma Elaborate_Body to ensure initialization
	of Null_String_Id.

2014-02-20  Matthew Heaney  <heaney@adacore.com>

	* a-chtgbk.adb (Replace): Use correct offset when calculating bucket
	index.

2014-02-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Iterator_Specification): Initialize
	properly the cursor type for subsequent volatile testing in SPARK
	mode, when domain is a formal container with an Iterabe aspect.

2014-02-20  Robert Dewar  <dewar@adacore.com>

	* errout.adb (Set_Warnings_Mode_Off): Add Reason argument.
	(Set_Specific_Warning_Off): Add Reason argument.
	* errout.ads (Set_Warnings_Mode_Off): Add Reason argument.
	(Set_Specific_Warning_Off): Add Reason argument.
	* erroutc.adb (Warnings_Entry): Add Reason field
	(Specific_Warning_Entry): Add Reason field.
	(Warnings_Suppressed): return String_Id for Reason.
	(Warning_Specifically_Suppressed): return String_Id for Reason.
	* erroutc.ads (Warnings_Entry): Add Reason field.
	(Specific_Warning_Entry): Add Reason field.
	(Set_Specific_Warning_Off): Add Reason argument.
	(Set_Warnings_Mode_Off): Add Reason argument.
	(Warnings_Suppressed): return String_Id for Reason.
	(Warning_Specifically_Suppressed): return String_Id for Reason.
	* errutil.adb (Warnings_Suppressed): returns String_Id for Reason
	(Warning_Specifically_Suppressed): returns String_Id for Reason
	* gnat_rm.texi: Document that Warning parameter is string literal
	or a concatenation of string literals.
	* par-prag.adb: New handling for Reason argument.
	* sem_prag.adb (Analyze_Pragma, case Warning): New handling
	for Reason argument.
	* sem_util.ads, sem_util.adb (Get_Reason_String): New procedure.
	* sem_warn.ads (Warnings_Off_Entry): Add reason field.
	* stringt.adb: Set Null_String_Id.
	* stringt.ads (Null_String_Id): New constant.

2014-02-20  Robert Dewar  <dewar@adacore.com>

	* einfo.ads: Minor comment addition: Etype of package is
	Standard_Void_Type.
	* checks.adb, exp_aggr.adb, exp_atag.adb, exp_attr.adb, exp_ch13.adb,
	exp_ch2.adb, exp_ch3.adb, exp_ch4.adb, exp_ch5.adb, exp_ch6.adb,
	exp_ch7.adb, exp_ch9.adb, exp_dbug.adb, exp_disp.adb, exp_imgv.adb,
	exp_intr.adb, exp_prag.adb, exp_sel.adb, exp_strm.adb, exp_util.adb,
	freeze.adb, rtsfind.adb, sem_aggr.adb, sem_attr.adb, sem_ch10.adb,
	sem_ch12.adb, sem_ch13.adb, sem_ch3.adb, sem_ch4.adb, sem_ch5.adb,
	sem_ch6.adb, sem_ch8.adb, sem_dim.adb, sem_prag.adb, sem_res.adb,
	sem_util.adb, tbuild.adb, tbuild.ads: Remove New_Reference_To.
	Replace all calls with calls to New_Occurrence_Of.

2014-02-20  Robert Dewar  <dewar@adacore.com>

	* par-util.adb (Ignore, case of right paren): Make this a
	serious error.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* sem_ch5.adb, sem_prag.adb, sem_attr.adb: Minor reformatting.
	* debug.adb: Remove -gnatd.X switch, no longer used.
	* styleg.adb (Check_Then): Remove check of -gnatd.X, check is
	now always made.

2014-02-19  Bob Duff  <duff@adacore.com>

	* g-socket.ads: Minor: Correct some comments.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb: Inhibit iterator rewriting in ASIS mode.

2014-02-19  Arnaud Charlet  <charlet@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications): Do not generate
	an error on out of range priorities if Relaxed_RM_Semantics.
	* sem_prag.adb (Analyze_Pragma): Ditto.

2014-02-19  Bob Duff  <duff@adacore.com>

	* sem_attr.adb (Resolve_Attribute): Detect the case of F'Access
	where F denotes the renaming of an enumeration literal, and
	issue a specialized error message.

2014-02-19  Matthew Heaney  <heaney@adacore.com>

	* a-chtgop.ads (Checked_Index): New operation.
	(Next): Changed mode of hash table.
	* a-chtgop.adb (Adjust, Delete_Node_Sans_Free): Detect tampering
	(Generic_Read, Reserve_Capacity): Ditto.
	(Generic_Equal): Detect tampering.
	(Next): Changed mode of hash table, detect tampering.
	* a-chtgke.ads (Checked_Index, Checked_Equivalent_Keys): New
	operation.
	(Find): Changed mode of hash table.
	* a-chtgke.adb (Checked_Equivalent_Keys): New operation
	(Delete_Key_Sans_Free, Generic_Conditional_Insert): Detect
	tampering.
	(Find): Changed mode of hash table, check for tampering.
	(Generic_Replace_Element): Check for tampering.
	* a-chtgbk.ads (Checked_Index, Checked_Equivalent_Keys): New operation.
	* a-chtgbk.adb (Checked_Index, Checked_Equivalent_Keys): New
	operation (Delete_Key_Sans_Free, Generic_Conditional_Insert):
	Detect tampering.
	(Find, Generic_Replace_Element): Check for tampering.
	* a-chtgbo.ads (Checked_Index): New operation.
	* a-chtgbo.adb (Checked_Index): New operation
	(Delete_Node_Sans_Free, Generic_Equal): Detect tampering.
	(Generic_Read, Next): Ditto.
	* a-cohase.adb, a-cihase.adb (Is_In): Changed mode of hash
	table (Difference, Intersection): Use variable view of
	source, detect tampering (Find, Is_Subset, Overlap): Use
	variable view of container (Symmetric_Difference, Union):
	Detect tampering (Vet): Use Checked_Index to detect tampering
	(Constant_Reference, Element, Find): Use variable view of
	container.
	(Update_Element_Preserving_Key): Detect tampering.
	* a-cbhase.adb (Difference, Find, Is_In): Use variable view
	of container.
	(Is_Subset): Ditto.
	(Equivalent_Sets, Overlap): Use Node's Next component.
	(Vet): Use Checked_Index to detect tampering.
	(Constant_Reference, Element, Find): Use variable view of container.
	(Update_Element_Preserving_Key): Detect tampering.
	* a-cohama.adb, a-cihama.adb, a-cbhama.adb (Constant_Reference,
	Element, Find): Use variable view of container.
	(Reference): Rename hash table component.
	(Vet): Use Checked_Index to detect tampering.

2014-02-19  Arnaud Charlet  <charlet@adacore.com>

	* adabkend.adb (Scan_Compiler_Arguments): Add missing handling
	of -nostdinc.

2014-02-19  Thomas Quinot  <quinot@adacore.com>

	* tbuild.adb (New_Occurrence_Of, New_Rerefence_To): Guard
	against calls without Def_Id.

2014-02-19  Claire Dross  <dross@adacore.com>

	* a-cfdlli.ads, a-cfhase.ads, a-cforma.ads, a-cfhama.ads, a-cforse.ads,
	a-cofove.ads: Add global annotations to subprograms.

2014-02-19  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Initial_Condition_In_Decl_Part): Remove
	constants Errors, Pack_Id and Pack_Init. Remove variable Vars.
	Initial_Condition no longer requires the presence of pragma
	Initialized. Do not try to diagnose whether all variables mentioned in
	pragma Initializes also appear in Initial_Condition.
	(Collect_Variables): Removed.
	(Match_Variable): Removed.
	(Match_Variables): Removed.
	(Report_Unused_Variables): Removed.

2014-02-19  Thomas Quinot  <quinot@adacore.com>

	* gnat_rm.texi (pragma Stream_Convert): Minor rewording.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb, sem_util.ads, prj-conf.adb, s-os_lib.adb: Minor
	reformatting.

2014-02-19  Vincent Celier  <celier@adacore.com>

	* prj-part.adb (Parse_Single_Project): Use the fully resolved
	project path, with all symbolic links resolved, to check if the
	same project is imported with a different unresolved path.
	* prj-tree.ads (Project_Name_And_Node): Component Canonical_Path
	changed to Resolved_Path to reflect that all symbolic links
	are resolved.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.ads, sem_util.adb (Get_Cursor_Type): Moved to sem_util
	from sem_ch13, for use elsewhere.
	* sem_ch13.adb (Get_Cursor_Type): Moved to sem_util.
	* sem_ch5.adb (Analyze_Iterator_Specification): Set properly the
	cursor type on the loop variable when the iteration is over o
	formal container.

2014-02-19  Vincent Celier  <celier@adacore.com>

	* prj-conf.adb (Add_Default_GNAT_Naming_Scheme): Add declaration
	for an empty Target (Check_Target): Never fail when an empty
	target is declared in the configuration project.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Check_Arg_Is_Local_Name): Argument is local if
	the pragma comes fron a predicate aspect and the context is a
	record declaration within the scope that declares the type.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Minor clarifications.
	* expander.adb, sem_aggr.adb: Add comments.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb (Check_Arg_Is_Local_Name): For an aspect that
	applies to a subprogram body, the name is the current scope,
	rather than being declared in the current scope.
	(Analyze_Pragma, case No_Return): Handle properly a No_Return
	aspect applied to a subprogram body.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Resolve_Iterable_Operation): Improve resolution
	of overloaded subprograms, and fix bug in handling of primitive
	operation Element.

2014-02-19  Pascal Obry  <obry@adacore.com>

	* s-os_lib.adb: Minor reformatting.

2014-02-19  Yannick Moy  <moy@adacore.com>

	* expander.adb (Expand): Do nothing inside generics.
	* sem_aggr.adb (Aggregate_Constraint_Checks): Do nothing inside
	generics.

2014-02-19  Yannick Moy  <moy@adacore.com>

	* exp_ch2.adb: Remove useless 'with' of unit Uintp.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, style.adb, sem_prag.adb, sem_ch13.adb: Minor reformatting
	* a-sequio.adb: Remove useless pragma Extensions_Allowed (no
	longer needed).

2014-02-19  Claire Dross  <dross@adacore.com>

	* a-cfdlli.ads, a-cfhase.ads, a-cforma.ads, a-cfhama.ads,
	a-cforse.ads, a-cofove.ads: Add Iterable aspect to formal containers.

2014-02-19  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Analyze_Declarations): Analyze
	a package contract at the end of the private declarations (if
	applicable), otherwise analyze it and the end of the visible
	declarations.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* style.adb (Missing_Overriding): If subprogram is an
	instantiation, place warning on the instance node itself,
	without mention of the original generic. Do not emit message
	if explicit Ada version is older than the introduction of the
	overriding indicator.

2014-02-19  Yannick Moy  <moy@adacore.com>

	* gnat_rm.texi: Doc clarifications.

2014-02-19  Yannick Moy  <moy@adacore.com>

	* exp_util.adb (Remove_Side_Effects): Do not remove side-effects
	inside a generic.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Get_Cursor_Type): Obtain cursor type from
	specified First primitive, rather than by name.
	(Validate_Iterable_Aspect, Resolve_Iterable_Operation): Use it,
	and extend error checking for missing primitives and incorrect
	signatures.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Check_Pragma_Implemented): Detect additional
	errors when a Synchronization aspect on an overriding protected
	operation does not match the given aspect on the overridden
	operation of an ancestor interface.

2014-02-19  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Check_Loop_Pragma_Grouping): New routine.
	(Check_Loop_Pragma_Placement): Update
	comment on usage. Remove local variables Orig_Stmt and
	Within_Same_Sequence. Check that the current Loop_Invariant or
	Loop_Variant pragma is grouped together with other such pragmas.
	(Is_Loop_Pragma): New routine.
	(Prev_In_Loop): Removed.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* par-ch6.adb (P_Return): For extended return, end column lines
	up with RETURN.
	* par.adb: Minor documentation clarification.

2014-02-19  Yannick Moy  <moy@adacore.com>

	* sem_prag.adb (Check_Loop_Pragma_Placement): Add check
	that Loop_Invariant and Loop_Variant appear consecutively.
	* gnat_rm.texi Update documentation of Loop_Invariant and
	Loop_Variant pragmas.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Document -gnatd.X.
	* par-ch5.adb (P_If_Statement): Always check THEN, even if not
	first token
	(Check_Then_Column): Ditto.
	* styleg.adb (Check_Then): Allow THEN on line after IF.
	(Check_Then): Check THEN placement under control of -gnatd.X
	* styleg.ads (Check_Then): Now called even if THEN is not first
	token on line.
	* stylesw.ads (Style_Check_If_Then_Layout): Document new
	relaxed rules.
	* gnat_ugn.texi: For -gnatyi, THEN can now be on line after IF.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* a-cfhama.adb, a-cfhase.adb, a-cforse.adb, a-cofove.adb, a-ngcefu.adb,
	a-teioed.adb, a-wtedit.adb, a-ztedit.adb, exp_ch5.adb, inline.adb,
	prj-pp.adb, prj-tree.adb, sem_ch12.adb, sem_ch8.adb,
	vms_conv.adb: Fix bad layout of IF statements

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* exp_util.adb (Side_Effect_Free): Scalar if expressions can be SEF.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* exp_util.adb: Update comments.

2014-02-19  Doug Rupp  <rupp@adacore.com>

	* bindgen.adb (Gen_Adainit) [VMS] New global Float_Format.
	* init.c (__gl_float_format): [VMS] New global.
	(__gnat_set_features): Call FP_CONTROL to set FPSR for the float
	representation in effect.

2014-02-19  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch6.adb Add with and use clause for Exp_Prag.
	(Expand_Contract_Cases): Relocated to Exp_Prag.
	* exp_ch6.ads (Expand_Contract_Cases): Relocated to Exp_Prag.
	* exp_prag.adb Add with and use clauses for Checks and Validsw.
	(Expand_Contract_Cases): Relocated from Exp_Ch6. Update the
	structure of the expanded code to showcase the evaluation of
	attribute 'Old prefixes. Add local variable Old_Evals. Expand
	any attribute 'Old references found within a consequence. Add
	circuitry to evaluate the prefixes of attribute 'Old that
	belong to a selected consequence.
	(Expand_Old_In_Consequence): New routine.
	* exp_prag.ads (Expand_Contract_Cases): Relocated from Exp_Ch6.
	* sem_attr.adb (Check_Use_In_Contract_Cases): Warn that a
	potentially unevaluated prefix is always evaluated.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb (Expand_Min_Max_Attribute): Use Insert_Declaration
	(Expand_Min_Max_Attribute): Use Matching_Standard_Type.
	* exp_ch4.adb (Expand_N_Expression_With_Actions): Remove special
	handling for the case of Modify_Tree_For_C, this approach did
	not work.
	* exp_util.adb (Matching_Standard_Type): New function
	(Side_Effect_Free): New top level functions (from
	Remove_Side_Effects).
	* exp_util.ads (Side_Effect_Free): New top level functions
	(moved from body).
	* sinfo.ads: Minor comment updates.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch6.adb (Expand_Simple_Function_Return): If return
	type is unconstrained and uses the secondary stack, mark the
	enclosing function accordingly, to ensure that the value is not
	prematurely removed.

2014-02-19  Hristian Kirtchev  <kirtchev@adacore.com>

	* par.adb Alphabetize the routines in Par.Sync.
	(Resync_Past_Malformed_Aspect): New routine.
	* par-ch13.adb (Get_Aspect_Specifications): Alphabetize local
	variables. Code and comment reformatting. Detect missing
	parentheses on aspects [Refined_]Global and [Refined_]Depends
	with a non-null definition.
	* par-sync.adb: Alphabetize all routines in this separate unit.
	(Resync_Past_Malformed_Aspect): New routine.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* sem_eval.ads, sem_eval.adb (Subtypes_Statically_Match): Return False
	if Esize values do not match.

2014-02-19  Yannick Moy  <moy@adacore.com>

	* sinfo.ads: Minor comment update.

2014-02-19  Hristian Kirtchev  <kirtchev@adacore.com>

	* atree.ads: Minor reformatting (change Entity_Info to Einfo).

2014-02-19  Thomas Quinot  <quinot@adacore.com>

	* exp_ch7.adb (Find_Node_To_Be_Wrapped): An assignment statement
	that has the No_Ctrl_Actions flag is a suitable node to be
	wrapped if the assigned expression has no finalization actions.
	* sem_eval.adb (Eval_Entity_Name): For a compile time known
	boolean value, mark the corresponding condition SCO as constant.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* exp_util.adb: Minor reformatting.
	* exp_util.ads (Matching_Standard_Type): New function.
	* exp_ch7.adb: Minor reformatting.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Get_Cursor_Type): Use scope of iterable type
	to find declaration for Cursor, to handle properly the case of
	a discriminated iterable type.

2014-02-19  Vincent Celier  <celier@adacore.com>

	* gnatcmd.adb (GNATCmd): Always replace the object dirs of
	imported library projects with the library ALI dirs, when setting
	the object paths.
	* prj-env.ads (Ada_Objects_Path): Correct comments about
	argument Including_Libraries.

2014-02-19  Gary Dismukes  <dismukes@adacore.com>

	* gnat_rm.texi: Minor spelling fixes.

2014-02-19  Doug Rupp  <rupp@adacore.com>

	* init.c: Remove unneeded code.
	* fe.h (Float_Format): New macro
	* gcc-interface/trans.c (gigi): On VMS, set vms_float_format.

2014-02-19  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Check_Refined_Global_Item):
	A state or variable acts as a constituent only it is part of an
	encapsulating state and the state has visible refinement.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Contract): Do not warn on a
	postcondition for a function when the expression does not mention
	'Result but the function has in-out parameters.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Add documentation on Value_Size forcing biased
	representation.

2014-02-19  Hristian Kirtchev  <kirtchev@adacore.com>

	* lib-xref.ads Remove the small table of letter and symbol usage as we
	already have one.

2014-02-19  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Emit specific error
	messages depending on the offending misplaced aspect specifications.
	(Diagnose_Misplaced_Aspect_Specifications): New routine.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Get_Cursor): Utility to retrieve cursor type
	for iterable aspect primitives.
	(Resolve_Iterable_Operation): Use expected signature of iterable
	aspect to resolve primitive when overloading is present.
	(Validate_Iterable_Aspect, Analyze_Aspects_At_Freeze_Point): use it.
	(Check_Signature): Removed.

2014-02-19  Yannick Moy  <moy@adacore.com>

	* sem_ch10.adb (Analyze_Proper_Body): Issue error on missing
	subunit in GNATprove_Mode.
	* sinfo.ads (GNATprove_Mode): Document error issued in GNATprove_Mode.

2014-02-19  Hristian Kirtchev  <kirtchev@adacore.com>

	* lib-xref.ads Alphabetize the contents of table
	Xref_Entity_Letters. Add an entry in table Xref_Entity_Letters
	for E_Abstract_State. List all letters and symbols in use.
	* sem_prag.adb (Analyze_Abstract_State): Update all calls
	to Create_Abstract_State to reflect the new signature.
	(Create_Abstract_State): Change subprogram profile and update
	the comment on usage. Use the proper location of the state
	declaration when creating a new abstract state entity. Do not
	generate an external name, but simply reuse the name coming from
	the state declaration.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb (Expand_N_Expression_With_Actions): Make sure
	declarations get properly inserted in Modify_Tree_For_C mode.
	* sinfo.ads: Minor comment addition.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* par-ch9.adb, exp_ch5.adb, sem_ch5.adb, exp_attr.adb, sem_util.adb,
	sem_util.ads, sem_ch13.adb, sem_ch13.ads: Minor reformatting.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* style.adb (Missing_Overriding): Warning does not apply in
	language versions prior to Ada 2005.
	* snames.ads-tmpl: Add Name_Iterable and Attribute_Iterable.
	* sem_attr.adb: Add Attribute_Iterable where needed.
	* exp_attr.adb: ditto.
	* exp_ch5.adb (Expand_Formal_Container_Loop): New procedure to
	handle loops and quantified expressions over types that have an
	iterable aspect.  Called from Expand_Iterator_Loop.
	* sem_ch5.adb (Analyze_Iterator_Specification): Recognize types
	with Iterable aspect.
	* sem_ch13.adb (Validate_Iterable_Aspect): Verify that the
	subprograms specified in the Iterable aspect have the proper
	signature involving container and cursor.
	(Check_Aspect_At_Freeze_Point): Analyze value of iterable aspect.
	* sem_ch13.ads (Validate_Iterable_Aspect): New subprogram.
	* sem_util.ads, sem_util.adb (Get_Iterable_Type_Primitive):
	New procedure to retrieve one of the primitives First, Last,
	or Has_Element, from the value of the iterable aspect of a
	formal container.
	(Is_Container_Element): Predicate to recognize expressions
	that denote an element of one of the predefined containers,
	for possible optimization.  This subprogram is not currently
	used, pending ARG discussions on the legality of the proposed
	optimization. Worth preserving for eventual use.
	(Is_Iterator): Recognize formal container types.
	* aspects.ads, aspects.adb: Add Aspect_Iterable where needed.

2014-02-19  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb (Expand_Min_Max_Attribute): New procedure
	(Expand_N_Attribute_Reference): Use this procedure for Min and Max.
	* exp_ch4.adb (Expand_N_Expression_With_Actions): Remove object
	declarations from list of actions.
	* output.ads, output.adb (Delete_Last_Char): New procedure.
	* sinfo.ads: Document handling of Mod and expression with actions
	in Modify_Tree_For_C mode.

2014-02-19  Ed Schonberg  <schonberg@adacore.com>

	* par-ch9.adb (P_Task): Add a null statement to produce a
	well-formed task body when due to a previous syntax error the
	statement list is empty.

2014-02-19  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Check_Dependency_Clause): Account
	for the case where a state with a non-null refinement matches a
	null output list. Comment reformatting.
	(Inputs_Match): Copy a solitary input to avoid an assertion failure
	when trying to match the same input in multiple clauses.

2014-02-19  Gary Dismukes  <dismukes@adacore.com>

	* sem_attr.adb: Minor typo fix.

2014-02-18  Robert Dewar  <dewar@adacore.com>

	* cstand.adb (Build_Signed_Integer_Type): Minor change of formal
	from Int to Nat (Build_Unsigned_Integer_Type): New procedure
	(Create_Standard): Create new unsigned types.
	* exp_ch4.adb (Expand_N_Op_Mod): Expand mod in Modify_Tree_For_C
	mode (Expand_N_Reference): Removed, problematic and not needed
	for now.
	* exp_ch4.ads (Expand_N_Reference): Removed, problematic and
	not needed for now.
	* exp_util.ads, exp_util.adb (Power_Of_Two): New function.
	* expander.adb: Remove call to Expand_N_Reference (problematic,
	and not needed now).
	* sem_aux.ads, sem_aux.adb (Corresponding_Unsigned_Type): New function.
	* stand.adb: Read and write unsigned type entities.
	* stand.ads: Add new unsigned types.

2014-02-18  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch4.adb (Analyze_Call): Do not mark a function call
	as being inside an assertion expression as the flag is now removed.
	(Check_Ghost_Subprogram_Call): Do not query the
	In_Assertion_Expression flag as it is now removed, instead use
	a predicate function.
	* sem_elab.adb (Check_Internal_Call_Continue): Do not query the
	In_Assertion_Expression flag as it is now removed, instead use
	a predicate function.
	* sem_prag.ads: Add new table Assertion_Expression_Pragma.
	* sem_util.adb Add with and use clause for Sem_Prag.
	(In_Assertion_Expression_Pragma): New routine.
	* sem_util.ads (In_Assertion_Expression_Pragma): New routine.
	* sinfo.adb (In_Assertion_Expression): Removed.
	(Set_In_Assertion_Expression): Removed.
	* sinfo.ads Remove flag In_Assertion_Expression along with its
	use in nodes.
	(In_Assertion_Expression): Removed along with
	pragma Inline.	(Set_In_Assertion_Expression): Removed along
	with pragma Inline.

2014-02-18  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi: gnatpp section: add note that '-j' cannot be
	used together with '-r', '-rf' or '-rnb' options.

2014-02-18  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_attr.adb (Analyze_Attribute): Comment
	and code reformatting. Use separate routines to check the
	legality of attribute 'Old in certain pragmas. Verify
	the use of 'Old, 'Result and locally declared entities
	within the prefix of 'Old.
	(Check_References_In_Prefix): New routine.
	(Check_Use_In_Contract_Cases): New routine.
	(Check_Use_In_Test_Case): New routine.

2014-02-18  Vincent Celier  <celier@adacore.com>

	* sem_aux.adb (Is_By_Reference_Type): For each components of
	a record type, check also if the component is volatile as it
	may have an aspect that makes it volatile. If it is, then the
	record type is a by reference type.

2014-02-18  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb: Minor reformatting.
	* exp_ch4.ads, exp_ch4.adb (Expand_N_Reference): New procedure.
	* exp_util.adb (Remove_Side_Effects): Add conditional expressions
	as another case where we don't generate N_Reference nodes for
	primitive types.
	* expander.adb (Expand): Add call to Expand_N_Reference.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Refined_Pragma): Remove
	local variable Pack_Spec. Refinement pragmas may now apply to
	bodies of both visible and private subprograms.

2014-02-06  Robert Dewar  <dewar@adacore.com>

	* exp_attr.adb (Expand_Loop_Entry_Attribute):
	Minor change (Attr => N) (Expand_Pred_Succ): New name
	Expand_Pred_Succ_Attribute (Expand_N_Attribute_Reference, case
	Max): Expand into if expression if Modify_Tree_For_C mode.
	(Expand_N_Attribute_Reference, case Min): ditto
	* sinfo.ads: Modify_Tree_For_C takes care of expanding Min and
	Max attributes.

2014-02-06  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Analyze_Object_Declaration): Do not generate
	predicate check if this is an internal declaration with
	No_Initialization set, as for an expanded aggregate component.

2014-02-06  Doug Rupp  <rupp@adacore.com>

	* init.c (__gnat_default_resignal_p) [VMS]: Test for and resignal
	conditions with severity of "SUCCESS" or "INFORMATIONAL".

2014-02-06  Yannick Moy  <moy@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Analyze pragma
	Debug rewritten node before rewriting it as a null statement in
	GNATprove mode.

2014-02-06  Robert Dewar  <dewar@adacore.com>

	* sem_attr.adb (Min_Max): New procedure.
	(Max_Alignment_For_Allocation_Max_Size_In_Storage_Elements): New
	procedure.

2014-02-06  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi, vms_data.ads: Add documentation of '-t' option for
	gnatmetric/gnatpp.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Abstract_State): Update
	all calls to Create_Abstract_State to pass the proper state
	"declaration".
	(Create_Abstract_State): Add new formal parameter
	State_Decl along with comment on usage. Establish a link between
	the abstract state entity and the state declaration.

2014-02-06  Robert Dewar  <dewar@adacore.com>

	* sem_attr.adb (Analyze_Attribute, case Max): Check for improper
	comparison of unordered enumeration type.
	(Analyze_Attribute, case Max): Check for improper comparison of
	unordered enumeration type.
	* sem_res.adb (Bad_Unordered_Enumeration_Reference): Moved to
	sem_util.adb.
	* sem_util.ads, sem_util.adb (Bad_Unordered_Enumeration_Reference):
	Moved here from Sem_Res.

2014-02-06  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, sem_prag.adb, sem_res.adb, lib-xref.adb: Minor
	reformatting.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch6.adb (Process_Formals): Error message reformatting.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Handle_Late_Controlled_Primitive): Add local
	variable Spec. Do not inherit the null indicator from the
	subprogram body when generating the spec.

2014-02-06  Robert Dewar  <dewar@adacore.com>

	* casing.adb (Determine_Casing): Consider SPARK_Mode to be
	mixed case.

2014-02-06  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch6.adb (Is_Build_In_Place_Function): Predicate is false
	when the function has a foreign convention, but not if only the
	limited return type has such a convention.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Handle_Late_Controlled_Primitive): Remove local
	variable Spec. Comment reformatting. Use Copy_Separate_Tree
	rather than New_Copy_Tree when building the corresponding
	subprogram declaration.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Global_Item): Remove
	the mode-related checks on abstract states with enabled external
	properties.
	(Property_Error): Removed.

2014-02-06  Javier Miranda  <miranda@adacore.com>

	* lib-xref.adb (Generate_Reference): When
	generating the reference to the first private entity take care
	of handling swapped entities.

2014-02-06  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi, vms_data.ads: Add documentation of -j option for
	gnatmetric.

2014-02-06  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb (Expand_N_Shift_Left): Handle shift counts greater
	than the word size when operating in Modify_Tree_For_C mode.
	* sinfo.ads: Add documentation section on Modify_Tree_For_C mode.

2014-02-06  Robert Dewar  <dewar@adacore.com>

	* erroutc.adb (Warning_Specifically_Suppressed.Matches):
	compare is case insensitive.
	* gnat_rm.texi: Document that string compare for Warnings Off
	is now case insensitive.

2014-02-06  Eric Botcazou  <ebotcazou@adacore.com>

	* gnat_rm.texi: Small wording tweak.

2014-02-06  Pascal Obry  <obry@adacore.com>

	* prj-attr.adb, projects.texi, snames.ads-tmpl: Add Included_Patterns
	and Included_Artifact_Patterns attribute definitions.

2014-02-06  Yannick Moy  <moy@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Set
	SPARK_Mode pragma component for all subprograms, including stubs.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch10.adb (Analyze_Package_Body_Stub): Maintain
	the configuration options of the enclosing context in a
	stack-like fasion.
	(Analyze_Subprogram_Body_Stub): Maintain the
	configuration options of the enclosing context in a stack-like
	fashion.

2014-02-06  Robert Dewar  <dewar@adacore.com>

	* debug.adb: -gnatd.u sets Modify_Tree_For C
	* exp_ch4.adb (Expand_N_Op_Rotate_Left): Expand out
	if Modify_Tree_For_C (Expand_N_Op_Rotate_Right): ditto.
	(Expand_N_Op_Arithmetic_Right_Shift): ditto.
	* exp_intr.adb (Expand_Shift): Call expander so we do
	Modify_Tree_For_C expansions.
	* gnat1drv.adb (Adjust_Global_Switches): Set Modify_Tree_For_C
	if -gnatd.u set.

2014-02-06  Fedor Rybin  <frybin@adacore.com>

	* prj-proc.ads (Tree_Loaded_Callback): new type Callback used
	after the phase 1 of the processing of each aggregated project
	to get access to project trees of aggregated projects.
	(Process_Project_Tree_Phase_1): new parameter On_New_Tree_Loaded
	If specified, On_New_Tree_Loaded is called after each aggregated
	project has been processed succesfully.
	(Process): new parameter On_New_Tree_Loaded.
	* prj-proc.adb (Process_Aggregated_Projects): On_New_Tree_Loaded
	callback added after processing of each aggregated project.
	(Recursive_Process): new parameter On_New_Tree_Loaded.
	(Process): new parameter On_New_Tree_Loaded.
	(Process_Project_Tree_Phase_1): new parameter On_New_Tree_Loaded.
	* prj-conf.ads (Parse_Project_And_Apply_Config): new parameter
	On_New_Tree_Loaded.
	* prj-conf.adb (Parse_Project_And_Apply_Config): new parameter
	On_New_Tree_Loaded.

2014-02-06  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Implement --insert-blank-lines and
	--preserve-blank-lines switches.

2014-02-06  Sergey Rybin  <rybin@adacore.com frybin>

	* gnat_ugn.texi, vms_data.ads: Add documentation of -j option for
	gnatelim.

2014-02-06  Eric Botcazou  <ebotcazou@adacore.com>

	* gnat_rm.texi (Pragma Optimize_Alignment): Document the effect
	of the pragma on individual objects.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb Node29 is now used as BIP_Initialization_Call.
	(BIP_Initialization_Call): New routine.
	(Set_BIP_Initialization_Call): New routine.
	(Write_Field29_Name): Add an entry for constants and variables.
	* einfo.ads Add new attribute BIP_Initialization_Call and update
	its usage in nodes.
	(BIP_Initialization_Call): New routine along with pragma Inline.
	(Set_BIP_Initialization_Call): New routine along with pragma Inline.
	* exp_ch6.adb (Make_Build_In_Place_Call_In_Object_Declaration):
	Add local declaration Res_Decl. Capture the build-in-place
	initialization call when the related object declaration has
	created a transient block.
	* exp_ch7.adb (Process_Transient_Objects): Add local variable
	Fin_Insrt. Recognize a scenario where an object declaration acts
	as a transient context and is initialized by a build-in-place
	function call.

2014-02-06  Pascal Obry  <obry@adacore.com>

	* prj-util.adb (For_Interface_Sources): Fix handling of required
	bodies for aggregate libs.

2014-02-06  Robert Dewar  <dewar@adacore.com>

	* nlists.ads: Minor comment clarifications.

2014-02-06  Robert Dewar  <dewar@adacore.com>

	* gnat1drv.adb (Adjust_Global_Switches): Set Modify_Tree_For_C
	if gnatd.V set.
	* opt.ads (Modify_Tree_For_C): New flag.
	* output.ads, output.adb (Last_Char): New function.

2014-02-06  Pascal Obry  <obry@adacore.com>

	* projects.texi, prj-env.adb (Initialize_Default_Project_Path): Add
	share/gpr for cross-builds.

2014-02-06  Robert Dewar  <dewar@adacore.com>

	* exp_util.ads, checks.adb, sem_prag.adb, prj-util.adb, sem_ch13.adb:
	Minor reformatting and code clean ups.

2014-02-06  Pascal Obry  <obry@adacore.com>

	* prj-util.adb (For_Interface_Sources): Skip non compilable languages.
	* prj.ads: Minor typo fix in comment.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Depends_In_Decl_Part): Add
	local variable Expr. Flag clauses with extra parenthesis as this
	is not allowed by the syntax of the pragma. Code reformatting.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_attr.adb (Expand_N_Attribute_Reference): Alphabetize
	variables. Rename variabme Tnn to Temp. Do not create a temporary
	if assertions are disabled. Find enclosing routine _Postconditions
	and insert the temporary that captures the value of the prefix
	before the routine.
	* exp_ch6.adb (Build_Postconditions_Procedure):
	Insert the generated _Postconditions routine
	before the first source declaration of the related
	subprogram.
	(Insert_After_Last_Declaration): Removed.
	(Insert_Before_First_Source_Declaration): New routine.

2014-02-06  Ed Schonberg  <schonberg@adacore.com>

	* exp_util.adb, exp_util.ads (Within_Internal_Subprogram):
	Utility to determine whether current expansion is for the body
	of a predefined primitive operation.
	(Make_Predicate_Check): Use Within_Internal_Subpgram
	* checks.adb (Apply_Predicate_Check): Use
	Within_Internal_Subprogram
	* sem_ch13.adb (Freeze_Entity_Checks): Ditto.

2014-02-06  Pascal Obry  <obry@adacore.com>

	* prj.ads, prj-util.adb: Minor reformatting.

2014-02-06  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch6.adb (Expand_Subprogram_Contract, Append_Enabled_Item):
	Take into account the Split_PPC flag to ensure that conjuncts
	in a composite postcondition aspect are tested in source order.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch6.adb (Analyze_Generic_Subprogram_Body): Flag illegal
	use of SPARK_Mode.
	* sem_ch12.adb (Analyze_Generic_Subprogram_Declaration): Flag
	illegal use of SPARK_Mode.
	(Instantiate_Subprogram_Body): Flag illegal use of SPARK_Mode.
	* sem_prag.adb (Analyze_Pragma): Code reformatting.
	* sem_util.adb Add with and use clause for Aspects.
	(Check_SPARK_Mode_In_Generic): New routine.
	* sem_util.ads (Check_SPARK_Mode_In_Generic): New routine.

2014-02-06  Thomas Quinot  <quinot@adacore.com>

	* a-calend.adb (Formatting_Operations.Split): Ensure that
	Time_Error is raised for invalid time values.

2014-02-06  Arnaud Charlet  <charlet@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Rewrite as a null statement
	in GNATprove_Mode.

2014-02-06  Robert Dewar  <dewar@adacore.com>

	* einfo.ads, einfo.adb (Is_Discriminant_Check_Function): New flag.
	* exp_ch3.adb (Build_Dcheck_Function): Set
	Is_Discriminant_Check_Function.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch7.adb (Is_Subprogram_Call): Inspect
	the original tree in certain cases where a construct has been
	factored out and replaced by a reference to a temporary.

2014-02-06  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Process_Full_View): Fix typo in the order of
	parameters when propagating predicate function to full view.
	(Find_Type_Of_Object): Freeze base type of object type to catch
	premature use of discriminated private type without a full view.

2014-02-06  Robert Dewar  <dewar@adacore.com>

	* sprint.adb: Minor reformatting.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Process_Transient_Object): Add local variable
	Temp_Ins. When the transient object is initialized by an
	aggregate, the hook must capture the object after the last
	component assignment takes place.
	* exp_ch7.adb (Detect_Subprogram_Call): Expose the subprogram to
	routine Is_Subprogram_Call.
	(Is_Subprogram_Call): Inspect an
	aggregate that has been heavily expanded for subprogram calls.
	(Process_Transient_Objects): Add local variables Expr, Ptr_Id
	and Temp_Ins.  Remove the nested declare block and adjust the
	indentation. When the transient object is initialized by an
	aggregate, the hook must capture the object after the last
	component assignment takes place.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Global_Item): Detect illegal uses of
	external states with enabled properties that do not match the
	global mode.
	(Property_Error): New routine.
	* sem_res.adb (Property_Error): New routine.
	(Resolve_Actuals): Detect illegal uses of external variables with
	enabled properties in procedure calls that do not match the mode of
	the corresponding formal parameter.

2014-02-06  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_util.adb (Has_Enabled_Property): Rename
	formal parameter Prop_Nam to Property. Update the comment on usage
	and all occurrences in the body. Add local variable Prop_Nam. When
	inspecting a property with an expression, the property name
	appears as the first choice of the component association.

2014-02-04  Robert Dewar  <dewar@adacore.com>

	* exp_ch5.adb, einfo.ads, freeze.adb, sem_ch8.adb: Minor reformatting.

2014-02-04  Gary Dismukes  <dismukes@adacore.com>

	* sem_aggr.adb: Change "runtime" to "run time" in warning message,
	for consistency with other messages.

2014-02-04  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch5.adb  (Expand_Iterator_Loop):  For a container element
	iterator, indicate that the element is a constant if the container
	type does not have a variable indexing aspect.
	* sem_ch8.adb (Analyze_Object_Renaming): If the entity is already
	marked as constant, do not reset its Ekind, to ensure that
	container elements in an element loop are not modified if the
	container (e.g. a hashed set) only has a constant indexing aspect.

2014-02-04  Arnaud Charlet  <charlet@adacore.com>

	* g-souinf.ads: Subprograms in this unit are actually not pure.
	* freeze.adb (Freeze_Subprogram): Do not reset Is_Pure for Intrinsics.
	* einfo.ads (Is_Pure): Update doc to match implementation.

2014-02-04  Gary Dismukes  <dismukes@adacore.com>

	* exp_ch13.adb: Minor spelling fix.

2014-02-04  Robert Dewar  <dewar@adacore.com>

	* opt.ads: Minor comment update.

2014-02-04  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb (Expand_N_Expression_With_Actions): Use Rewrite
	instead of Replace.

2014-02-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_aggr.adb (Resolve_Array_Aggregate): Suppress warnings
	on null expressions if component type is non-null, when the
	corresponding association covers an empty range of index values.

2014-02-04  Robert Dewar  <dewar@adacore.com>

	* sinfo.ads: Further comments on N_Expression_With_Actions node.

2014-02-04  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Refined_Depends_In_Decl_Part): Remove global
	variables Out_Items and Ref_Global. Remove local constant
	Body_Id along with dummy variables D1, D2, D3, D4, D5, D6, D7
	and D8. Remove the useless collection of global items as this
	was a leftover from an earlier version of the routine. Move
	several routines out to avoid deep nesting and indentation.
	(Inputs_Match): Add formal parameter Dep_Clause. Rename formal
	parameter Do_Checks to Post_Errors. Update the comment on usage.
	(Is_Matching_Input): Renamed to Input_Match. Add formal parameters
	Ref_Inputs and Do_Checks. Rename formal parameter Do_Checks
	to Post_Errors. Update the comment on usage. Account for the
	case where a self referential state may have a null input_list.
	(Is_Self_Referential): New routine.

2014-02-04  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb (Analyze_Attribute_Definition_Clause): If the
	entity renames an expression, as in the case of an object of
	an unconstrained type initialized by a function call, defer the
	rewriting of the expression to the expander.
	* exp_ch13.adb (Expand_N_Attribute_Definition_Clause, case
	'Alignment): If the entity renames an expression, introduce
	temporary to capture value, and rewrite original declaration to
	use temporary.

2014-02-04  Gary Dismukes  <dismukes@adacore.com>

	* g-comlin.adb: Minor typo fix.

2014-02-04  Ed Schonberg  <schonberg@adacore.com>

	* freeze.adb (Freeze_All): Types derived from a formal
	access_to_classwide type do not have a finalization master.

2014-02-04  Robert Dewar  <dewar@adacore.com>

	* sprint.adb: Minor reformatting.

2014-02-04  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb (Expand_N_Expression_With_Actions): Eliminate
	cases where Actions is a null list.
	* sinfo.ads (N_Expression_With_Actions): Actions can be
	temporarily empty during semantic analysis, but must be non-empty
	in the final expanded tree.

2014-01-31  Robert Dewar  <dewar@adacore.com>

	* exp_ch9.adb: Minor reformatting.

2014-01-31  Emmanuel Briot  <briot@adacore.com>

	* g-comlin.adb (Set_Command_Line): Take the switches
	configuration from the Command_Line_Config.

2014-01-31  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Refinement_Clause): Guard against a malformed
	refinement clause.

2014-01-31  Vincent Celier  <celier@adacore.com>

	* projects.texi: Add more documentation about others used as an
	index in indexed attributes.

2014-01-31  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Minor update.
	* gnat_rm.texi: Add example to Restriction_Warnings documentation.
	* exp_util.adb: Minor reformatting.

2014-01-31  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch9.adb (Expand_Entry_Barrier): Warn if the barrier
	depends on data that is not private to the protected object,
	and potentially modifiable in unsynchronized fashion.

2014-01-31  Yannick Moy  <moy@adacore.com>

	* erroutc.adb (Validate_Specific_Warnings): Remove special case for
	GNATprove_Mode.

2014-01-31  Robert Dewar  <dewar@adacore.com>

	* prj-attr.ads (First_Attribute_Of): Returns Empty_Attribute
	for Unknown_Package.
	* sem_ch6.adb, sem_attr.adb: Minor comment addition.

2014-01-31  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_util.adb (Build_Allocate_Deallocate_Proc): Rewrite
	the logic that generates a runtime check to determine the
	controlled status of the object about to be allocated or
	deallocated. Class-wide types now always use a runtime check
	even if they appear as generic actuals.
	(Find_Object): Detect
	a special case that involves interface class-wide types because
	the object appears as a complex expression.

2014-01-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Process_Formals): In Ada2012 mode, place
	subprogram with an incomplete untagged formals on the list of
	private dependents, to verify that the type is properly completed
	in the private part.
	* sem_attr.adb: Code clean up.

2014-01-31  Robert Dewar  <dewar@adacore.com>

	* exp_ch6.adb: Minor reformatting.

2014-01-31  Vincent Celier  <celier@adacore.com>

	* prj-attr.adb (First_Attribute_Of): Return Unknown_Attribute
	when Pkg is unknown.

2014-01-31  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_res.adb (Resolve_Entity_Name): Comment
	reformatting. Allow volatile objects in various generated checks.

2014-01-31  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Analyze_Attribute, case 'Update): For a record
	component association, set the etype of the identifier, for
	SPARK use.

2014-01-31  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch6.adb (Has_Visibility_Of_Subprogram): If type is not
	declared in a package, not checks can apply to the subprogram.

2014-01-31  Robert Dewar  <dewar@adacore.com>

	* erroutc.adb (Validate_Specific_Warnings): Warnings are
	controlled -gnatw.W.
	* gnat_ugn.texi: Document new warnings controlled by -gnatw.w.
	* opt.ads (Warn_On_Warnings_Off): Now controls more cases.

2014-01-31  Arnaud Charlet  <charlet@adacore.com>

	* exp_disp.adb: Update comments.

2014-01-31  Yannick Moy  <moy@adacore.com>

	* sem_ch12.adb (Analyze_Generic_Subprogram_Declaration,
	Save_Global_References): Guard access to expression in aspect.

2014-01-31  Yannick Moy  <moy@adacore.com>

	* sem_prag.adb (Analyze_Pragma/Pragma_SPARK_Mode):
	Issue an error when the pragma is applied to a generic unit,
	a generic declaration, or inside a generic.

2014-01-31  Yannick Moy  <moy@adacore.com>

	* sem_ch8.adb (Analyze_Subprogram_Renaming): Set SPARK_Mode on renaming
	entity.

2014-01-31  Robert Dewar  <dewar@adacore.com>

	* exp_ch9.adb, s-tassta.adb, s-tposen.adb, s-tposen.ads: Minor
	reformatting.

2014-01-31  Tristan Gingold  <gingold@adacore.com>

	* exp_disp.adb: Add a historic note.

2014-01-31  Robert Dewar  <dewar@adacore.com>

	* sem_warn.adb (Warn_On_Useless_Assignments): Add call to
	Process_Deferred_References.

2014-01-31  Yannick Moy  <moy@adacore.com>

	* erroutc.adb (Validate_Specific_Warnings): Do not issue a message for
	ineffective pragma Warnings(Off) in GNATprove_Mode.

2014-01-31  Bob Duff  <duff@adacore.com>

	* s-taskin.ads: Minor comment fix.
	* s-tassta.adb (Abort_Dependents): Don't abort all dependents;
	just direct dependents. If this is actually an abort, each task
	will take care of aborting its dependents, so all dependents will
	get aborted, as before. However, when this is called the second
	time from Vulnerable_Complete_Master "for convenience" (i.e. to
	kill off tasks waiting at terminate alternatives), aborting
	indirect dependents is wrong, because it causes some unrelated
	tasks to get aborted.

2014-01-31  Robert Dewar  <dewar@adacore.com>

	* sem_ch4.adb: Minor reformatting.

2014-01-31  Robert Dewar  <dewar@adacore.com>

	* exp_ch2.adb: New calling sequence for Is_LHS.
	* frontend.adb: Add call to Process_Deferred_References.
	* lib-xref.ads, lib-xref.adb (Process_Deferred_References): New.
	(Deferred_References): New table.
	* sem_ch8.adb (Find_Direct_Name): Make deferred reference table
	entries.
	(Find_Expanded_Name): Ditto.
	* sem_res.adb: New calling sequence for Is_LHS.
	* sem_util.ads, sem_util.adb (Is_LHS): New calling sequence.
	* sem_warn.adb: Call Process_Deferred_References before issuing
	warnings.

2014-01-31  Tristan Gingold  <gingold@adacore.com>

	* exp_util.adb (Corresponding_Runtime_Package): Restrict the
	use of System_Tasking_Protected_Objects_Single_Entry.
	* exp_ch9.adb (Build_Simple_Entry_Call): Remove Mode parameter
	of Protected_Single_Entry_Call.
	(Expand_N_Timed_Entry_Call): Remove single_entry case.
	* exp_disp.adb (Make_Disp_Asynchronous_Select_Body): Remove
	single_entry case.
	(Make_Disp_Timed_Select_Body): Likewise.
	* rtsfind.ads (RE_Timed_Protected_Single_Entry_Call): Remove.
	* s-tposen.adb (Send_Program_Error, PO_Do_Or_Queue): Remove
	Self_Id parameter.
	(Wakeup_Entry_Caller): Remove Self_ID and New_State parameters.
	(Wait_For_Completion_With_Timeout): Remove.
	(Protected_Single_Entry_Call): Remove Mode parameter
	(always Simple_Call).
	(Service_Entry): Remove Self_Id constant (not used anymore).
	(Timed_Protected_Single_Entry_Call): Remove.
	* s-tposen.ads (Timed_Protected_Single_Entry_Call): Remove.
	(Protected_Single_Entry_Call): Remove Mode parameter.

2014-01-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb (Get_Pragma): Handle the retrieval of pragma Refined_Post.
	* einfo.ads (Get_Pragma): Update the comment on special pragmas
	handled by this routine.
	* sem_prag.adb (Analyze_Pragma): Add a legal pragma Refined_Post
	to the contract of the related subprogram body.
	* sem_util.adb (Add_Contract_Item): Handle the insertion of
	pragma Refined_Post into the contract of a subprogram body.
	* sinfo.ads Update the documentation of node N_Contract.
	* sem_res.adb (Resolve_Entity_Name): Add a guard
	to detect abstract states and variables only when checking the
	SPARK 2014 rules concerning volatile object placement.

2014-01-29  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Find_Equality_Types, Try_One_Interp): within an instance,
	null is compatible with any access type.

2014-01-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_util.adb (Find_Placement_In_State_Space): Assume that the default
	placement is not in a package.

2014-01-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_util.adb (Has_Enabled_Property): Compare the character field of
	the sole property.

2014-01-29  Robert Dewar  <dewar@adacore.com>

	* sem_intr.adb, a-ztexio.ads, sinfo.ads, sem_res.adb, gnatlink.adb,
	vms_conv.adb, a-except.ads, a-except-2005.ads, a-teioed.adb,
	sem_warn.ads, treepr.ads, erroutc.ads, a-excach.adb: Minor reformatting.

2014-01-29  Robert Dewar  <dewar@adacore.com>

	* sem_util.ads, sem_util.adb (In_Pragma_Expression): New function.
	* sem_warn.adb (Check_References): Suppress warnings if inside
	Initial_Condition pragma.

2014-01-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Check_Missing_Part_Of): List all values of
	State_Space_Kind for readability reasons. Do not emit an error on
	a private item when the enclosing package lacks aspect/pragma
	Abstract_State. Do not emit an error on a private package
	instantiation when the corresponding generic template lacks
	visible state.
	(Has_Visible_State): New routine.
	* sem_util.adb (Find_Placement_In_State_Space): The visible
	declarations of any kind of child units in general act as proper
	placement location.

2014-01-29  Robert Dewar  <dewar@adacore.com>

	* a-except-2005.adb, a-except.adb, a-excpol-abort.adb, a-exstat.adb,
	ali.adb, a-numaux.ads, a-numaux-darwin.ads, a-numaux-libc-x86.ads,
	a-numaux-vms.ads, a-numaux-vxworks.ads, a-numaux-x86.ads, aspects.ads,
	a-taside.adb, a-teioed.adb, a-textio.adb, a-textio.ads, atree.adb,
	atree.ads, a-witeio.adb, a-witeio.ads, a-wtedit.adb, a-ztedit.adb,
	a-ztexio.adb, bcheck.adb, binde.adb, checks.adb, comperr.adb,
	cstand.adb, debug_a.adb, einfo.ads, errout.adb, erroutc.adb,
	eval_fat.adb, exp_aggr.adb, exp_attr.adb, exp_ch11.adb, exp_ch3.adb,
	exp_ch4.adb, exp_ch5.adb, exp_ch6.adb, exp_ch9.adb, exp_dbug.adb,
	exp_disp.adb, exp_fixd.adb, exp_imgv.adb, exp_intr.adb, exp_util.adb,
	freeze.adb, frontend.adb, g-comlin.ads, g-mbdira.adb, gnat1drv.adb,
	gprep.adb, g-spipat.adb, i-cpp.ads, i-vxwork.ads, i-vxwork-x86.ads,
	krunch.ads, layout.adb, lib-load.adb, lib-writ.adb, lib-writ.ads,
	live.adb, namet.ads, osint.adb, osint-c.adb, output.ads, par.adb,
	par-ch10.adb, par-ch13.adb, par-ch3.adb, par-ch4.adb, par-ch5.adb,
	par-ch6.adb, par-ch9.adb, par-endh.adb, par-labl.adb, par-prag.adb,
	par-sync.adb, par-tchk.adb, par-util.adb, prj.adb, repinfo.adb,
	rtsfind.adb, s-arit64.adb, s-asthan-vms-alpha.adb,
	s-asthan-vms-ia64.adb, s-bignum.adb, scans.adb, scng.adb, s-dimmks.ads,
	sem_aggr.adb, sem_attr.adb, sem_aux.adb, sem_cat.adb, sem_ch10.adb,
	sem_ch12.adb, sem_ch13.adb, sem_ch13.ads, sem_ch3.adb, sem_ch4.adb,
	sem_ch5.adb, sem_ch6.adb, sem_ch8.adb, sem_disp.adb, sem_elab.adb,
	sem_elim.adb, sem_eval.adb, sem_intr.adb, sem_prag.adb, sem_res.adb,
	sem_type.adb, sem_util.adb, sem_warn.adb, set_targ.adb, s-fatgen.adb,
	s-fatgen.ads, s-fileio.adb, s-imgcha.adb, s-imgrea.adb, sinfo.ads,
	sinput-c.adb, snames.ads-tmpl, s-os_lib.adb, sprint.adb,
	s-regpat.adb, s-secsta.adb, s-stalib.ads,
	s-stchop.adb, s-stoele.ads, stand.ads, s-taprop-solaris.adb,
	s-tasdeb-vms.adb, s-tasini.adb, s-tassta.adb, s-valdec.adb,
	s-valuti.adb, s-wchjis.adb, s-wchwts.adb, system.ads, system-vms_64.ads,
	system-vms-ia64.ads, treepr.adb, types.ads, uintp.adb, uname.adb,
	urealp.adb, usage.adb, vxaddr2line.adb: Minor reformatting.

2014-01-29  Robert Dewar  <dewar@adacore.com>

	* expander.adb: Minor reformatting.

2014-01-29  Javier Miranda  <miranda@adacore.com>

	* exp_ch3.adb (Predefined_Primitive_Bodies): Adding documentation to
	previous patch.

2014-01-29  Javier Miranda  <miranda@adacore.com>

	* exp_ch3.adb (Predefined_Primitive_Bodies): Complete the code
	that checks if an interface types defines the predefined "="
	function because the compiler was erroneously not generating the
	predefined "=" primitive as soon as the name of some interface
	primitive is "=" (formals were not checked).

2014-01-29  Ed Schonberg  <schonberg@adacore.com>

	* expander.adb (Expander): In GNATprove mode, do not process
	transient scopes: they are in general not created in this mode,
	and an attempt to examine them will lead to constraint errors when
	processing configuration pragmas that have analyzable expressions.

2014-01-29  Vincent Celier  <celier@adacore.com>

	* clean.adb (Gnatclean): Fail if main project is an aggregate
	project or if there is an aggregate library project in the
	project tree.
	* gnatcmd.adb: Fail if the main project is an aggregate project
	or if there is an aggegate library project in the project tree.
	* make.adb (Initialize): : Fail if main project is an aggregate
	project or if there is an aggregate library project in the
	project tree.
	* makeutl.ads (Aggregate_Libraries_In): New Boolean function.
	* prj-makr.adb (Initialize): Fail if the main project is an
	aggregate project or an aggregate library project.

2014-01-29  Vincent Celier  <celier@adacore.com>

	* prj-part.adb (Check_Import_Aggregate): New procedure
	to check if an imported project is an aggregate project.
	(Parse_Single_Project): Call Check_Import_Aggregate
	* projects.texi: Document that aggregate projects cannot be
	extended or imported.

2014-01-29  Robert Dewar  <dewar@adacore.com>

	* exp_ch9.adb, sem_ch7.ads, s-regexp.adb, sem_ch13.adb: Minor
	reformatting and code clean up.
	* gnat_ugn.texi: Add documentation section on Atomic Variables
	and Optimization.

2014-01-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb Flag264 is now unused.
	(Has_Body_References): Removed.
	(Set_Has_Body_References): Removed.
	(Write_Entity_Flags): Remove the output for flag Has_Body_References.
	* einfo.ads Update the comment on usage of attribute
	Body_References. Remove attribute Has_Body_References and its
	usage in nodes.
	(Has_Body_References): Removed along with pragma Inline.
	(Set_Has_Body_References): Removed along with pragma Inline.
	* sem_prag.adb (Analyze_Global_Item): Move the call to
	Record_Possible_Body_Reference in the state related checks
	section. Add a comment intended function.
	(Analyze_Input_Output): Move the call to Record_Possible_Body_Reference
	in the state related checks section. Add a comment intended function.
	(Analyze_Refinement_Clause): Cleanup the illegal body reference
	reporting. Add a comment on timing of error reporting.
	(Record_Possible_Body_Reference): Reimplement the routine.

2014-01-29  Vincent Celier  <celier@adacore.com>

	* makeutl.adb (Mains.Find_File_Add_Extension): Only look for specs for
	unit-based languages.
	(Mains.Complete_Mains.Do_Complete): Use the source file project
	tree when calling Find_File_Add_Extension. Use the correct
	project name when reporting an error.

2014-01-29  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.adb Add an entry for aspect Part_Of in table
	Canonical_Aspect.
	* aspects.ads Add an entry for aspect Part_Of in tables Aspect_Id,
	Aspect_Argument, Aspect_Names and Aspect_Delay.
	* atree.h Define Elist9.
	* atree.adb (Elist9): New routine.
	(Set_Elist9): New routine.
	* atree.ads (Elist9): New routine.
	(Set_Elist9): New routine.
	* einfo.adb Add Part_Of_Constituents and Encapsulating_State to
	the list of node usage.  Remove Refined_State from the list of
	node usage.
	(Encapsulating_State): New routine.
	(Get_Pragma):
	Handle pragma Part_Of; (Part_Of_Constituents): New routine.
	(Refined_State): Removed.
	(Set_Encapsulating_State): New routine.
	(Set_Part_Of_Constituents): New routine.
	(Set_Refined_State): Removed.
	(Write_Field9_Name): Add an entry
	for Part_Of_Constituents (Write_Field10_Name): Add an entry for
	Encapsulating_State. Remove the entry for Refined_State.
	* einfo.ads Add new attributes Encapsulating_State
	and Part_Of_Constituents alond with their usage in
	entities. Remove attribute Refined_State along with its
	usage in entities.
	(Encapsulating_State): New routine and
	pragma Inline.	(Get_Pragma): Update the comment on usage.
	(Part_Of_Constituents): New routine and pragma Inline.
	(Refined_State): Removed along with pragma Inline.
	(Set_Encapsulating_State): New routine and pragma Inline.
	(Set_Part_Of_Constituents): New routine and pragma Inline.
	(Set_Refined_State): Removed along with pragma Inline.
	* par-prag.adb Pragma Part_Of does not need any special processing
	by the parser.
	* sem_ch3.adb (Analyze_Declarations): Remove local variables
	Body_Id and Prag. Call separate routines to analyze the
	contract of a package [body].
	(Analyze_Object_Contract):
	Update the comment on usage. Remove local variables
	Items and Nam. Use Get_Pragma rather than traversing the
	classification list.  Verify whether the lack of indicator
	Part_Of agrees with the placement of the variable in state space.
	(Analyze_Object_Declaration): Initialize the encapsulating state
	of a variable.	(Requires_State_Refinement): Moved to sem_util.
	* sem_ch7.adb (Analyze_Package_Body_Contract): New routine.
	(Analyze_Package_Contract): New routine.
	* sem_ch7.ads (Analyze_Package_Body_Contract): New routine.
	(Analyze_Package_Contract): New routine.
	* sem_ch10.adb (Decorate_State): Initialize the encapsulating
	state and Part_Of constituents.
	* sem_ch13.adb (Analyze_Aspect_Specifications):
	Add processing for aspect Part_Of. Update all
	calls to Decorate_Delayed_Aspect_And_Pragma.
	(Check_Aspect_At_Freeze_Point): Aspect Part_Of does
	not need any special processing at freeze time.
	(Decorate_Delayed_Aspect_And_Pragma): Renamed to
	Decorate_Aspect_And_Pragma.  Add formal parameter Delayed and
	update the associated comment.
	* sem_prag.adb Add an entry for pragma Part_Of in table Sig_Flags.
	(Analyze_Abstract_State): Add new global variable State_Id. Remove
	local constants Errors and Loc. Remove local variables Is_Null
	and State_Nam. Create the entity of the abstract state on the
	spot, before all remaining checks are performed. Verify that a
	missing Part_Of option agrees with the placement of the abstract
	state within the state space.
	(Analyze_Depends_In_Decl_Part):
	Add new global variables Constits_Seen and States_Seen. Check
	that a state and a corresponding constituent do not appear
	in pragma [Refined_]Depends.
	(Analyze_Global_In_Decl_Part):
	Add new global variables Constits_Seen and States_Seen. Check
	that a state and a corresponding constituent do not appear
	in pragma [Refined_]Global.
	(Analyze_Global_Item):
	Remove the now obsolete code that deals with Part_Of.
	Add the entity of the global item to the list of processed
	items.	(Analyze_Initializes_In_Decl_Part): Add new global
	variables Constits_Seen and States_Seen. Check that a state
	and a corresponding constituent do not appear in pragma
	Initializes.
	(Analyze_Initialization_Item): Add the entity
	of the initialization item to the list of processed items.
	(Analyze_Input_Item): Add the entity of the initialization
	item to the list of processed items.
	(Analyze_Input_Output):
	Remove the now obsolete code that deals with Part_Of.  Add the
	entity of the input/output to the list of processed items.
	(Analyze_Part_Of): New routine.
	(Analyze_Part_Of_Option): Remove
	local constant Par_State. Add local constant Encaps and local
	variables Encaps_Id and Legal. Use Analyze_Part of to analyze
	the option. Turn the related state into a Part_Of constituent
	if the option is legal.
	(Analyze_Pragma): Add processing
	for pragma Part_Of.
	(Analyze_Refined_State_In_Decl_Part):
	Remove global constants Pack_Body and Spec_Id. Remove
	global variables Abstr_States and Hidden_States. Add new
	global variables Available_States, Body_Id, Body_States and
	Spec_Id. Add new local constant Body_Decl. Reimplement the
	logic that extracts the states available for refinement from
	the related package and the body hidden states of the said
	package.
	(Analyze_Refinement_Clause): Add local variable Part_Of_Constits.
	(Check_Applicable_Policy): Alphabetize body.
	(Check_Dependency_Clause): Replace Refined_State
	with Encapsulating_State.
	(Check_Matching_Constituent):
	Reimplement the logic that determines whether an item is a valid
	/ invalid constituent of the current refined state. Return when
	a construct does not denote a valid abstract state. Extract the
	list of Part_Of constituents for further analysis. Check that all
	Part_Of constituents of a state have been used in its refinement.
	(Check_Matching_State): Update the comment on usage. Operate
	on the list of available states.
	(Check_Missing_Part_Of): New routine.
	(Check_Refined_Global_Item): Replace Refined_State
	with Encapsulating_State.
	(Check_State_And_Constituent_Use): New routine.
	(Create_Abstract_State): New routine.
	(Is_Matching_Input): Replace Refined_State with Encapsulating_State.
	(Is_Part_Of): Removed.
	(Collect_Body_States): New routine.
	(Collect_Constituent): Replace Refined_State with Encapsulating_State.
	(Collect_Hidden_States): Removed.
	(Report_Unrefined_States): Change the profile of the procedure along
	with the comment on usage.
	(Report_Unused_Constituents): New routine.
	(Report_Unused_Hidden_States): Removed.
	(Report_Unused_States): New routine.
	* sem_prag.ads (Check_Missing_Part_Of): New routine.
	* sem_util.adb (Add_Contract_Item): Pragma Part_Of can now
	appear in the classification pragmas of a package instantiation
	or a variable.
	(Find_Placement_In_State_Space): New routine.
	(Is_Child): Removed.
	(Is_Child_Or_Sibling): Remove formal
	parameter Private_Child. Remove the private child checks.
	(Requires_State_Refinement): Moved from sem_ch3.
	* sem_util.ads Add new type State_Space_Kind along with
	comment on its usage and values.
	(Add_Contract_Item): Update the comment on usage.
	(Find_Body_Discriminal): Alphabetize spec.
	(Find_Placement_In_State_Space): New routine.
	(Is_Child_Or_Sibling): Remove formal parameter Private_Child
	and update the comment on usage.
	(Requires_State_Refinement): Moved from sem_ch3.
	* sinfo.ads: Update the documentation of N_Contract.
	* snames.ads-tmpl The predefined name for Part_Of is now used
	to denote a pragma. Add Pragma_Id for Part_Of.

2014-01-29  Emmanuel Briot  <briot@adacore.com>

	* s-regexp.adb (Create_Secondary_Table): Automatically grow the state
	machine as needed.
	(Dump): New subprogram.

2014-01-29  Tristan Gingold  <gingold@adacore.com>

	* exp_ch9.adb (Expand_N_Protected_Type_Declaration): Add
	Expand_Entry_Declaration to factorize code.

2014-01-29  Ed Schonberg  <schonberg@adacore.com>

	* checks.adb: minor clarification.
	* sem_ch7.adb (Declare_Inherited_Private_Subprograms): Limit
	search for primitive operations to the entities that immediately
	follow the type declaration.

2014-01-29  Tristan Gingold  <gingold@adacore.com>

	* exp_ch9.adb (Build_Protected_Entry): Do not call
	Complete_Entry_Body anymore.
	* rtsfind.ads (RE_Complete_Single_Entry_Body): Remove.
	* s-tposen.ads, s-tposen.adb (Complete_Single_Entry_Body): Remove.

2014-01-29  Pierre-Marie Derodat  <derodat@adacore.com>

	* s-os_lib.adb, s-os_lib.ads (Normalize_Pathname): Return an empty
	string when the Name input bigger than allowed. Adapt the function
	specification.

2014-01-29  Ed Schonberg  <schonberg@adacore.com>

	* checks.adb (Install_Null_Excluding_Check): Do not emit warning
	if expression is within a case_expression of if_expression.

2014-01-29  Robert Dewar  <dewar@adacore.com>

	* exp_ch9.adb, inline.ads: Minor reformatting.

2014-01-29  Tristan Gingold  <gingold@adacore.com>

	* exp_ch9.adb (Is_Exception_Safe): Return true if no exceptions.

2014-01-29  Yannick Moy  <moy@adacore.com>

	* inline.ads (Pending_Body_Info): Add SPARK_Mode and
	SPARK_Mode_Pragma components to be able to analyze generic
	instance.
	* sem_ch12.adb (Analyze_Package_Instantiation,
	Inline_Instance_Body, Need_Subprogram_Instance_Body,
	Load_Parent_Of_Generic): Pass in SPARK_Mode from instantiation
	for future analysis of the instance.
	(Instantiate_Package_Body,
	Instantiate_Subprogram_Body, Set_Instance_Inv): Set SPARK_Mode
	from instantiation to analyze the instance.

2014-01-29  Robert Dewar  <dewar@adacore.com>

	* sem_ch7.adb, sem_prag.adb, sem_ch4.adb, sem_ch6.adb: Minor code
	reorganization.

2014-01-29  Yannick Moy  <moy@adacore.com>

	* gnat_rm.texi: Update description of SPARK_Mode pragma.

2014-01-29  Tristan Gingold  <gingold@adacore.com>

	* exp_ch9.adb (Expand_N_Protected_Body): Remove Num_Entries.

2014-01-29  Thomas Quinot  <quinot@adacore.com>

	* sem_ch4.adb (Find_Component_In_Instance): Update comment.

2014-01-29  Ed Schonberg  <schonberg@adacore.com>

	* exp_util.adb (Build_Task_Image_Prefix): Indicate that the
	resulting string is an internal entity. and thus requires no
	initialization. This is relevant when Initialize_ Scalars is
	enabled, because the resultant spurious initialization may lead to
	secondary stack anomalies that produce a mangled name for a task.

2014-01-29  Yannick Moy  <moy@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): SPARK_Mode
	not inherited from spec anymore. Check consistency
	rules after processing of declarations.
	* sem_ch7.adb (Analyze_Package_Body_Helper): SPARK_Mode not inherited
	from spec anymore. Check consistency rules after processing of
	declarations.
	(Analyze_Package_Declaration): Set SPARK_Mode only for non-generic
	packages.
	* sem_prag.adb (Analyze_Pragma/Pragma_SPARK_Mode): Implement new
	consistency rules.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* sem_res.adb (Resolve_Comparison_Op): Add type name/location
	to unordered msg.
	(Resolve_Range): Add type name/location to unordered msg.

2014-01-27  Claire Dross  <dross@adacore.com>

	* a-cofove.adb/s (Copy): Add precondition so that Copy (Source,
	Capacity) is only called with Capacity >= Length (Source) and
	Capacity in Capacity_Range.
	* a-cfdlli.adb/s, a-cfhase.adb/s, a-cfhama.adb/s, a-cforse.adb/s,
	a-cforma.adb/s (Copy): Add precondition so that Copy (Source, Capacity)
	is only called with Capacity >= Source.Capacity. Raise Capacity_Error
	in the code is this is not the case.

2014-01-27  Thomas Quinot  <quinot@adacore.com>

	* sem_ch4.adb (Analyze_Selected_Component): Fix handling of
	selected component in an instance where the component of the
	actual is not visibile at instantiation.

2014-01-27  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb: sem_ch6.adb (Set_Actual_Subtypes): If the type
	has a dynamic predicate, generate freeze node for Actual_Subtype
	at once, because the declaration of the corresponding predicate
	function will make reference to it.

2014-01-27  Tristan Gingold  <gingold@adacore.com>

	* exp_ch7.adb, exp_ch9.adb: Adjust comments.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb (Expand_N_Op_Expon): Remove unsigned type test
	for 2**X optimization.

2014-01-27  Ed Schonberg  <schonberg@adacore.com>

	* a-suenst.adb: strings.utf_encoding.strings (Decode): Check
	explicitly whether value is in range of Character, because the
	library is typically compiled with range checks disabled, and
	we cannot rely on the implicit check on the argument of 'Val.

2014-01-27  Vincent Celier  <celier@adacore.com>

	* a-ciorma.adb, a-cihama.adb (Assign): Copy the Source to the Target,
	not the Target to itself.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* vms_conv.ads, ali.adb, sem_ch6.ads, opt.ads, vms_cmds.ads: Minor
	changes to avoid incorrect use of unordered enum types.

2014-01-27  Thomas Quinot  <quinot@adacore.com>

	* sem_ch4.adb: Minor reformatting.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* scn.adb (Check_End_Of_Line): Removed.
	(Error_Long_Line): Removed.
	(Determine_License): Use versions of above routines from Scanner.
	* scng.adb (Check_End_Of_Line): Moved to spec.
	(Error_Long_Line): Removed, no longer used.
	* scng.ads (Check_End_Of_Line): Moved here from body.

2014-01-27  Tristan Gingold  <gingold@adacore.com>

	* exp_ch7.adb (Build_Cleanup_Statements): Call
	Build_Protected_Subprogram_Call_Cleanup to insert the cleanup
	for protected body.
	* exp_ch9.adb (Build_Protected_Subprogram_Body): Likewise.
	 Remove Service_Name variable.
	(Build_Protected_SUbprogam_Call_Cleanup): New procedure that
	factorize code from the above subprograms.
	* exp_ch9.ads (Build_Protected_Subprogram_Call_Cleanup): New procedure.

2014-01-27  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb (Has_Option): Reimplemented.
	* sem_prag.adb (Analyze_Refinement_Clause): Add global
	variables AR_Constit, AW_Constit, ER_Constit, EW_Constit,
	External_Constit_Seen and State. Add local variables Body_Ref,
	Body_Ref_Elmt and Extra_State. Reimplement part of the logic to
	avoid a cumbersome while pool. Verify the legality of an external
	state and relevant properties.
	(Check_External_Property): New routine.
	(Check_Matching_State): Remove parameter profile
	and update comment on usage.
	(Collect_Constituent): Store the
	relevant external property of a constituent.
	* sem_util.adb (Async_Readers_Enabled): Update the call to
	Has_Enabled_Property.
	(Async_Writers_Enabled): Update the call to Has_Enabled_Property.
	(Effective_Reads_Enabled): Update the call to Has_Enabled_Property.
	(Effective_Writes_Enabled): Update the call to Has_Enabled_Property.
	(Has_Enabled_Property): Rename formal parameter Extern to State_Id.
	Update comment on usage. Reimplement the logic to recognize the various
	formats of properties.

2014-01-27  Ed Schonberg  <schonberg@adacore.com>

	* par-ch5.adb: Minor reformatting.

2014-01-27  Tristan Gingold  <gingold@adacore.com>

	* s-tposen.ads: Harmonize style and comments.

2014-01-27  Vincent Celier  <celier@adacore.com>

	* projects.texi: Document that shared library projects, by
	default, cannot import projects that are not shared library
	projects.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* sem_ch8.adb (Find_Selected_Component): Use Replace instead
	of Rewrite.

2014-01-27  Ed Schonberg  <schonberg@adacore.com>

	* a-suenco.adb, a-suenst.adb (Decode): Raise encoding error if
	any other exception is raised.
	(Convert): If both Input_Scheme and Output_Scheme are UTF_8 it is
	still necessary to perform a conversion in order to remove overlong
	encodings.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* exp_smem.adb: Minor reformatting.

2014-01-27  Thomas Quinot  <quinot@adacore.com>

	* a-calfor.ads: Fix incorrect reference to operator "-" in comment.

2014-01-27  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Make_Call_Into_Operator): In ASIS mode, relocate
	nodes for operands to the original node for the call, to preserve
	Original_Node pointers within the resolved operands, given that
	they may have been rewritten as well. Previous approach copied
	the operands into a new tree and lost those pointers.

2014-01-27  Claire Dross  <dross@adacore.com>


	* a-cofove.adb, a-cofove.ads: Add Strict_Equal function to the API.

2014-01-27  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb (Check_Internal_Protected_Use): A call through
	an anonymous access parameter of the current protected function
	is not a potential modification of the current object.

2014-01-27  Ed Schonberg  <schonberg@adacore.com>

	* a-cobove.adb (Reserve_Capacity): Procedure raises
	Capacity_Error, not Constraint_Error, when request cannot be
	satisfied.

2014-01-27  Vincent Celier  <celier@adacore.com>

	* a-coorma.adb, a-cohama.adb (Assign): Copy the Source to the Target,
	not the Target to itself.

2014-01-27  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch4.adb (Expand_Concatenate): If the target of the
	concatenation is a library-level entity, always use the off-line
	version of concatenation, regardless of optimization level. This
	is space-efficient, and prevents linking problems when some
	units are compiled with different optimization levels.

2014-01-27  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb: Code clean up.

2014-01-27  Ed Schonberg  <schonberg@adacore.com>

	* par-ch5.adb (P_Iterator_Specification): Improve error recovery
	when an array or container iterator includes a subtype indication,
	which is only legal in an element iterator.

2014-01-27  Thomas Quinot  <quinot@adacore.com>

	* exp_ch7.adb: Minor reformatting.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* opt.adb (SPARK_Mode): Default for library units is None rather
	than Off.
	* opt.ads: Remove AUTO from SPARK_Mode_Type SPARK_Mode_Type is
	no longer ordered.
	* sem_prag.adb (Analyze_Pragma, case SPARK_Mode): Remove AUTO
	possibility.
	* snames.ads-tmpl (Name_Auto): Removed, no longer used.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* par-ch5.adb (P_Sequence_Of_Statements): Make entry in
	Suspicious_Labels table if we have identifier; followed by loop
	or block.
	* par-endh.adb (Evaluate_End_Entry): Search Suspicious_Labels table.
	* par.adb (Suspicious_Labels): New table.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* exp_aggr.adb (Check_Bounds): Reason is range check, not
	length check.

2014-01-27  Yannick Moy  <moy@adacore.com>

	* get_spark_xrefs.adb (Get_SPARK_Xrefs): Accept new type 'c' for
	reference.
	* lib-xref-spark_specific.adb (Is_Global_Constant): Remove useless
	function now.
	(Add_SPARK_Xrefs): Include references to constants.
	* spark_xrefs.ads Document new character 'c' for references to
	constants.

2014-01-27  Thomas Quinot  <quinot@adacore.com>

	* exp_smem.adb (Add_Write_After): For a function call, insert write as
	an after action in a transient scope.

2014-01-27  Thomas Quinot  <quinot@adacore.com>

	* exp_smem.adb (Expand_Shared_Passive_Variable): For a reference
	to a shared variable as an OUT formal in a call to an init proc,
	the 'Read call must be emitted after, not before, the call.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Remove mention of AUTO mode for SPARK_Mode pragma.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* a-wichha.adb (Character_Set_Version): Change to output proper
	value.

2014-01-27  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb (Is_Input_Only_State): Removed.
	(Is_Non_Volatile_State): Removed.
	(Is_Output_State): Removed.
	* einfo.ads (Is_Input_Only_State): Remove attribute and
	subprogram. Update related entity.
	(Is_Non_Volatile_State):
	Remove attribute and subprogram. Update related entity.
	(Is_Output_State): Removed attribute and subprogram. Update
	related entity.
	* exp_ch6.adb (Expand_Subprogram_Contract): Update comment on
	generated code.
	* sem_ch3.adb (Analyze_Declarations): Analyze the contract of
	an object, not just variables.
	(Analyze_Object_Contract): New routine.
	(Analyze_Variable_Contract): Removed.
	(Process_Discriminants): Detect an illegal use of volatile
	discriminant in SPARK mode.
	* sem_ch5.adb (Analyze_Iterator_Specification):
	Detect an illegal use of volatile loop variable.
	(Analyze_Loop_Parameter_Specification): Detect an illegal use
	of volatile loop variable.
	* sem_ch6.adb (Process_Formals): Update the volatile object
	detection. Detect an illegal formal of mode IN OUT or OUT in
	SPARK mode. Enhance the error messages with references.
	* sem_ch12.adb (Instantiate_Object): Update the volatile object
	detection. Enhance the error messages with references.
	* sem_prag.adb (Analyze_Abstract_State): Enhance the error
	messages with references.
	(Analyze_Contract_Case): Enhance the error messages with references.
	(Analyze_External_Property): Call Check_Duplicate_Property to process
	an external property.
	(Analyze_External_Property_In_Decl_Part): New routine.
	(Analyze_External_State_In_Decl_Part): Removed.
	(Analyze_Global_Item): Detect an illegal
	use of a volatile constant. Detect an illegal use
	of a variable with enabled Effective_Reads. Enhance
	the error messages with references. Remove obsolete
	checks concerning Input_Only and Output_Only states.
	(Analyze_Initialization_Item): Enhance the error messages
	with references.
	(Analyze_Initializes_In_Decl_Part): Do not
	collect the states and variables when the initialization list
	is null.
	(Analyze_Input_Item): Enhance the error messages with references.
	(Analyze_Input_Output): Enhance the error messages with references.
	(Analyze_Pragma): Enhance the error messages with references.
	(Analyze_Refinement_Clause): Code reformatting.
	(Analyze_Refined_Depends_In_Decl_Part):
	Rename global variable Global to Reg_Global and update all
	occurrences. Add local variables D7 and D8. Update the error
	messages with references. Update the call to Collect_Global_Items.
	(Analyze_Refined_Global_In_Decl_Part): Add local variables
	Has_Proof_In_State, Proof_In_Constits and Proof_In_Items. Update
	the call to Collect_Global_Items.  Account for a Proof_In state
	in null / useless refinement checks. Verify the coverage of
	Proof_In states.
	(Check_Dependency_Clause): Remove local variable
	Out_Constits. Remove the retrieval and removal of constituents
	for an Output_Only state. Remove the reporting of unused
	Output_Only state constituents.
	(Check_Duplicate_Mode): Enhance
	the error message with a reference.
	(Check_Duplicate_Property): New routine.
	(Check_Duplicate_Option): Enhance the error message with a reference.
	(Check_External_Properties): Enhance the error message with a reference.
	(Check_Function_Return): Enhance the error message with a reference.
	(Check_In_Out_States): Update
	comment on usage. Add a specialized error message for Proof_In
	constituents. Enhance the error message with a reference.
	(Check_Input_States): Update comment on usage. Account for
	possible Proof_In constituents. Enhance the error message
	with a areference.
	(Check_Matching_Constituent): Enhance the error message with a
	reference.
	(Check_Matching_State): Enchance the error message with a reference.
	(Check_Mode): Add local variable From_Global. Update the call to
	Find_Mode.  Emit more precise error messages concerning extra items
	(Check_Mode_Restriction_In_Enclosing_Context): Consider
	pragma Refined_Global.	Enhance the error message with a
	reference.
	(Check_Mode_Restriction_In_Function): Enhance the error message with
	a reference.
	(Check_Output_States): Update comment on usage. Add local variable
	Posted.  Account for possible Proof_In constituents. Produce a detailed
	list of missing constituents.
	(Check_Proof_In_States): New routine.
	(Check_Refined_Global_Item): Handle Proof_In
	constituents. Enchance the error message with a reference.
	(Collect_Global_Items): Add formal parameters Proof_In_Items
	and Has_Proof_In_State. Update the comment on usage. Account
	for Proof_In items.
	(Create_Or_Modify_Clause): Enchance
	the error message with a reference.
	(Find_Mode): Add
	formal parameter From_Global. Update the comment on usage.
	Detect when the mode is governed by pragma [Refined_]Global.
	(Output_Constituents): Removed.
	(Report_Extra_Constituents):
	Report extra Proof_In constituents.
	(Report_Unused_Constituents): Removed.
	(Usage_Error): Code reformatting. Enhance the error
	messages with reference.
	* sem_prag.ads (Analyze_External_Property_In_Decl_Part): New routine.
	(Analyze_External_State_In_Decl_Part): Removed.
	* sem_res.adb (Resolve_Actuals): Update the volatile object
	detection. Enhance the error message with a reference.
	(Resolve_Entity_Name): Update the volatile object
	detection. Enhance the error message with a reference.
	* sem_util.adb (Is_Refined_State): Add a guard to avoid a crash.
	(Is_SPARK_Volatile_Object): New routine.
	(Has_Volatile_Component): New routine.
	* sem_util.ads (Is_Delegate): Alphabetized.
	(Is_SPARK_Volatile_Object): New routine.
	(Has_Volatile_Component): New routine.
	* snames.ads-tmpl: Remove names Name_Input_Only and Name_Output_Only.

2014-01-27  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb: Resolve fully prefix of 'Update.

2014-01-27  Ben Brosgol  <brosgol@adacore.com>

	* gnat_rm.texi: Minor clarifications.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* sem_elab.adb (Check_Internal_Call_Continue): Avoid complaining
	about call that is generated as part of an Initial_Condition
	check.
	* sem_prag.adb: Minor spelling correction.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Set_Convention_From_Pragma): Check that
	convention Ghost can only apply to functions.
	* einfo.ads, einfo.adb (Is_Ghost_Subprogram): Add clarifying comment.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* gnat_ugn.texi: Add Short_Enums to documentation of
	-gnatet/-gnateT.

2014-01-27  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Analyze_Input_Item): Correct check for input
	item in same package.
	* sem_util.ads, sem_util.adb (Within_Scope): New function.

2014-01-26  Arnaud Charlet  <charlet@adacore.com>

	* a-intnam-lynxos.ads, mlib-tgt-specific-lynxos.adb,
	s-osinte-lynxos-3.adb, s-osinte-lynxos-3.ads, s-osinte-lynxos.adb,
	s-osinte-lynxos.ads, s-taprop-lynxos.adb, s-tpopsp-lynxos.adb,
	system-lynxos-ppc.ads, system-lynxos-x86.ads: Removed, no longer
	maintained.

2014-01-25  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/Makefile.in: Fix oversight.

2014-01-25  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/utils.c (convert_to_fat_pointer): Un-obfuscate the
	conversion from a thin pointer with a shifted value.
	* gcc-interface/utils2.c (gnat_build_constructor): Propagate the
	read-only flag from the values onto the result.
	(gnat_invariant_expr): Accept read-only CONSTRUCTORs.

2014-01-25  Tristan Gingold  <gingold@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity): Always build a variable
	for E_Variable with a pragma Linker_Section.

2014-01-25  Robert Dewar  <dewar@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_param): Make sure an Out parameter
	with Default_Value aspect is passed in by copy.

2014-01-24  Eric Botcazou  <ebotcazou@adacore.com>

	* set_targ.adb: Set Short_Enums.
	* gcc-interface/lang.opt (fshort-enums): New option.
	* gcc-interface/misc.c (gnat_handle_option): Handle it.
	(gnat_post_options): Do not modify the global settings.

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* g-rannum.ads, g-rannum.adb (Random_Ordinary_Fixed): New generic
	function.
	(Random_Decimal_Fixed): New generic function.
	* s-rannum.ads: Minor comment clarifications.

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* back_end.adb: Remove Short_Enums handling (handled in
	Ttypes/Get_Targ now) Minor added comments.
	* freeze.adb: Change name Short_Enums_On_Target to
	Target_Short_Enums.
	* get_targ.ads, get_targ.adb (Get_Short_Enums): New function.
	* opt.ads: Minor comment updates.
	* sem_ch13.adb: Change name Short_Enums_On_Target to
	Target_Short_Enums.
	* set_targ.adb: Set Short_Enums from gcc back end.
	* set_targ.ads (Short_Enums): New variable.
	* targparm.ads, targparm.adb: Remove Short_Enums entries (handled in
	Ttypes/Get_Targ now).
	* ttypes.ads (Target_Short_Enums): New constant boolean switch

2014-01-24  Pascal Obry  <obry@adacore.com>

	* g-sercom-mingw.adb: Fix serial port name for port number > 10.

2014-01-24  Gary Dismukes  <dismukes@adacore.com>

	* exp_disp.adb (Expand_Dispatching_Call): Call Unqualify on Param when
	comparing it with Ctrl_Arg, since Ctrl_Arg may have had qualification
	stripped off.

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* sinfo.ads, make.adb, prj-env.adb: Minor reformatting.

2014-01-24  Vincent Celier  <celier@adacore.com>

	* prj.adb (Add_Aggregated_Project): Do not add a project in
	the list if it is already there.

2014-01-24  Yannick Moy  <moy@adacore.com>

	* lib-xref-spark_specific.adb (Enclosing_Subprogram_Or_Package):
	Correct the search for a subrogram declaration to which a pragma is
	attached.

2014-01-24  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Document --decimal-grouping and
	--based-grouping switches in gnatpp.

2014-01-24  Ed Schonberg  <schonberg@adacore.com>

	* sinfo.ads: Documentation update.

2014-01-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Constant_Redeclaration): New declaration is
	illegal if previous one has an initial expression that is an
	aggregate expanded into assignments.

2014-01-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Loop_Parameter_Specification): Small
	code reorganization to remove spurious warning on a loop with
	an array element iterator that has a null range.

2014-01-24  Vincent Celier  <celier@adacore.com>

	* make.adb (Binding_Phase): When setting the Ada paths, use
	the library ALI dir, not the object dir in libraries.

2014-01-24  Yannick Moy  <moy@adacore.com>

	* sinfo.ads: Add documentation of check flag fields.

2014-01-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Resolve_Actuals): If an actual is a view
	conversion of a discriminated object, and the formal type is
	discriminated and constrained, apply a discriminant check to
	the object itself.

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* prj.adb, prj-env.adb, back_end.adb: Add comment, minor code clean ups.

2014-01-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch3.adb (Analyze_Declarations): At the end of an
	appropriate declarative part, call Freeze_All from the first
	declaration in the scope, not from the first unfrozen one. This
	is necessary to apply visibility checks to entities with delayed
	aspects. Otherwise, in the presence of instantiations and cleanups
	that they may generate, the delayed aspects may be analyzed too
	late and produce spurious visibility errors.
	* sem_attr.adb: Place etype on range.
	* sem_ch6.adb: Documentation expression functions.

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* exp_ch7.adb: Minor change of Indices to Indexes (preferred
	terminology in compiler).

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* scans.ads: Remove Tok_Raise from Sterm, Eterm, After_SM
	categories, now that Ada 95 supports raise expressions.

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* freeze.adb (Freeze_Enumeration_Type): Use new target parameter
	Short_Enums_On_Target.
	* sem_ch13.adb (Set_Enum_Esize): Take Short_Enums_On_Target
	into account.
	* targparm.ads, targparm.adb: Add new target parameter Short_Enums.

2014-01-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch5.adb (Analyze_Iterator_Specification): If subtype
	indication is given explicity, check that it matches the array
	component type or the container element type of the domain
	of iteration.

2014-01-24  Tristan Gingold  <gingold@adacore.com>

	* back_end.adb (Scan_Compiler_Arguments): Set Short_Enums_On_Target.
	* gcc-interface/misc.c (flag_short_enums): Declare.
	(gnat_post_options): Set it.

2014-01-24  Vincent Celier  <celier@adacore.com>

	* prj-env.adb (Ada_Objects_Path): Use Ada_Objects_Path_No_Libs
	to cache the result when Including_Libraries is False.
	* prj-env.ads (Ada_Objects_Path): Update documentation
	* prj.adb (Free (Project_Id)): Also free Ada_Objects_Path_No_Libs
	(Get_Object_Directory): Return the Library_Ali_Dir only when
	when Including_Libraries is True.
	* prj.ads (Get_Object_Directory): Fix and complete documentation
	(Project_Data): New component Ada_Objects_Path_No_Libs

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* checks.adb (Expr_Known_Valid): Result of fpt operator never
	considered valid.

2014-01-24  Eric Botcazou  <ebotcazou@adacore.com>

	* back_end.adb: Minor fix in comment.

2014-01-24  Javier Miranda  <miranda@adacore.com>

	* sem_ch3.adb (Check_Abstract_Overriding): Code reestructuration
	required to report the error in case of task types.

2014-01-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb: Additional index checking.

2014-01-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Analyze_Attribute, case 'Update): Analyze
	expressions in each component association, and for records note
	the entity in each association choice, for subsequent resolution.
	(Resolve_Attribute, case 'Update): Complete resolution of
	expressions in each component association.

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* sem.adb (Sem): Avoid premature reference to Current_Sem_Unit
	(this was causing Is_Main_Unit_Or_Main_Unit_Spec to be set wrong,
	leading to wrong handling of SPARK_Mode for library units).

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Set SPARK_Mode
	on generic instances (do not consider them to be internally
	generated)

2014-01-24  Doug Rupp  <rupp@adacore.com>

	* s-osinte-android.ads (pthread_sigmask): Import sigprocmask
	vice pthread_sigmask.

2014-01-24  Vincent Celier  <celier@adacore.com>

	* prj.adb (Debug_Output (Str, Str2)): Output if verbosity is
	not default.

2014-01-24  Vincent Celier  <celier@adacore.com>

	* prj-ext.adb (Add): Do not output anything when Silent is True,
	whatever the verbosity. When Source is From_External_Attribute,
	set the corresponding environment variable if it is not already set.
	* prj-ext.ads (Add): New Boolean parameter Silent, defaulted
	to False
	* prj-proc.adb (Process_Expression_For_Associative_Array):
	For attribute External, call Prj.Ext.Add with Silent set to
	True for the child environment, to avoid useless output in non
	default verbosity.

2014-01-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Set_Slice_Subtype): Handle properly a discrete
	range given by a subtype indication, and force evaluation of
	the bounds, as for a simple range.
	* exp_util.adb (Evaluate_Slice_Bounds): Utility to force evaluation
	of bounds of slice for various kinds of discrete ranges.
	(Evaluate_Name, Evaluate_Subtype_From_Expr): use
	Evaluate_Slice_Bounds.

2014-01-24  Bob Duff  <duff@adacore.com>

	* s-taskin.ads (Activator): Make this Atomic, because
	Activation_Is_Complete reads it, and that can be called
	from any task. Previously, this component was only
	modified by the activator before activation, and by
	Self after activation.
	* a-taside.ads, a-taside.adb (Environment_Task,
	Activation_Is_Complete): Implement these missing functions.

2014-01-24  Doug Rupp  <rupp@adacore.com>

	* init.c: Add a handler section for Android.

2014-01-24  Arnaud Charlet  <charlet@adacore.com>

	* i-cexten.ads (Unsigned_33..64, Unsigned_33..64): New types.

2014-01-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Operator_Check): If one operand is a
	Raise_Expression, set its type to that of the other operand.
	* sem_res.adb (Resolve_Raise_Expression): new procedure.
	(Resolve_Actuals): For an actual that is a Raise_Expression,
	set the type to that of the formal.
	* sem_type.adb (Find_Unique_Type): If one of the operands is a
	Raise_Expression, return type of the other operand.

2014-01-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_aggr.adb (Resolve_Record_Aggregate): If a scalar
	component of the record has a type with a default aspect, and
	the corresponding aggregate component is initiaized with a box,
	use the default value in the rewritten aggregate.

2014-01-24  Tristan Gingold  <gingold@adacore.com>

	* s-interr.ads, s-interr.adb, s-interr-hwint.adb, s-interr-vms.adb,
	s-interr-sigaction.adb,
	s-interr-dummy.adb (Install_Restricted_Handlers): Add Prio parameter.
	* exp_ch9.adb (Make_Initialize_Protection): Add Prio parameter
	to the call to Install_Restricted_Handlers.

2014-01-24  Emmanuel Briot  <briot@adacore.com>

	* prj-nmsc.adb (Check_File): Add protection when the source is
	not fully initialized.

2014-01-24  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb (Is_Post_State): In a postcondition, a selected
	component that denotes an implicit dereference is a reference
	to the post state of the subprogram.

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): SPARK_Mode OFF
	for generated subprograms.
	(Analyze_Subprogram_Specification): Ditto.

2014-01-24  Vincent Celier  <celier@adacore.com>

	* prj-dect.adb (Check_Attribute_Allowed): Detect more forbidden
	attributes in package Builder of aggregate and aggregate library
	projects.
	* prj-nmsc.adb (Process_Naming_Scheme.Check.Check_Aggregate):
	Remove procedure (Process_Naming_Scheme.Check.Check_Aggregated):
	Remove parameters.  Change error message from "... externally
	build library ..." to "... externally built project ...".
	(Process_Naming_Scheme.Check): Do not do any check in aggregate
	project, as attribute Library_Dir and Library_Name have already
	been detected as forbidden.

2014-01-24  Vincent Celier  <celier@adacore.com>

	* prj-env.adb (Find_Project): If cached project path is not in
	project directory, look in current directory first and use cached
	project path only if project is not found in project directory.

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb, lib-xref.adb: Correct false positive warnings.

2014-01-24  Vincent Celier  <celier@adacore.com>

	* projects.texi: Document that aggregate projects are only
	supported by gprbuild, but not by gnatmake.  Document that the
	only attribute Switches in package Binder of aggregate projects
	will be ignored if its index is not others.  Document that
	attribute Global_Config_File is allowed in package Binder of
	aggregate projects.

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb: Minor code reorganization.
	* sem_util.adb: Minor fix of potential latent bug in Is_LHS.

2014-01-24  Pascal Obry  <obry@adacore.com>

	* prj-attr.adb, projects.texi, snames.ads-tmpl: Add Excluded_Patterns
	attribute definition.

2014-01-24  Vincent Celier  <celier@adacore.com>

	* makeutl.adb (Queue.Insert_No_Roots): In gprbuild, do not put
	in the Queue the same source (same path, same multi-source index)
	from the same project file, to avoid compiling several times
	the same source.

2014-01-24  Eric Botcazou  <ebotcazou@adacore.com>

	* einfo.ads (First_Rep_Item): Remove obsolete stuff.
	(Has_Gigi_Rep_Item): Likewise.
	* sem_prag.adb (Analyze_Pragma) <Pragma_Linker_Section>: Do not set
	Has_Gigi_Rep_Item for objects.
	* gcc-interface/decl.c (prepend_one_attribute_to): Rename into...
	(prepend_one_attribute): ...this.
	(prepend_one_attribute_pragma): New function extracted from...
	(prepend_attributes): ...here.  Swap the parameters for consistency.
	(gnat_to_gnu_entity): Adjust calls to prepend_one_attribute_to and to
	prepend_attributes.
	<object>: Deal with a pragma Linker_Section on a constant
	or variable.  <E_Function>: Deal with a pragma Linker_Section
	on a subprogram.
	(get_minimal_subprog_decl): Adjust calls to prepend_one_attribute_to.

2014-01-24  Vincent Celier  <celier@adacore.com>

	* opt.ads: Minor comment update.

2014-01-24  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Analyze_Input_Output): Add missing error check
	for junk operand.
	* sem_util.adb (Is_Refined_State): Add defense against junk
	tree from error.

2014-01-24  Pascal Obry  <obry@adacore.com>

	* projects.texi: Removes Build_Slaves attribute documentation.

2014-01-23  Robert Dewar  <dewar@adacore.com>

	* opt.adb (Register_Opt_Config_Switches): Save SPARK_Mode_Pragma
	setting.

2014-01-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb (Is_Potentially_Unevaluated): Predicate only
	applies to expressions that come from source.
	* sem_attr.adb (Analyze_Attribute, case 'Old): Improve error
	message.
	(Analyze_Attribute, case 'Loop_Entry): Apply SPARK 2014 legality
	rule regarding potentially unevaluated expressions, to prefix
	of attribute.

2014-01-23  Ed Schonberg  <schonberg@adacore.com>

	* exp_util.adb (Make_Invqriant_Call): If type of expression is
	a private extension, get invariant from base type.

2014-01-23  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb, sem_attr.adb: Minor reformatting.

2014-01-23  Robert Dewar  <dewar@adacore.com>

	* opt.adb (Save_Opt_Config_Switches): Save SPARK_Mode_Pragma
	(Restore_Opt_Config_Switches): Restore SPARK_Mode_Pragma.
	* sem.adb (Semantics): Remove save/restore of
	SPARK_Mode[_Pragma]. Not needed since already done in
	Save/Restore_Opt_Config_Switches.

2014-01-23  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi, einfo.adb, einfo.ads, sem_prag.adb, gnat_ugn.texi,
	freeze.adb, repinfo.adb, aspects.adb, aspects.ads, sem_ch13.adb:
	Linker_Section enhancements.

2014-01-23  Tristan Gingold  <gingold@adacore.com>

	* gnat_rm.texi: Minor editing.

2014-01-23  Robert Dewar  <dewar@adacore.com>

	* opt.adb (Set_Opt_Config_Switches): Reset SPARK mode for
	with'ed internal units.
	* sem.adb (Semantics): Save and restore SPARK_Mode[_Pragma].

2014-01-23  Javier Miranda  <miranda@adacore.com>

	* lib-xref.adb (Generate_Reference): As part of processing the
	"end-of-spec" reference generate an extra reference to the first
	private entity of the package.
	* xr_tabls.adb (Add_Reference): No action needed for the extra
	'E' reference associated; similar to the processing of the
	'e' reference.

2014-01-23  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Change "--&pp off" to "--!pp off".

2014-01-23  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.ads, sem_util.adb (Is_Potentially_Unevaluated): new
	predicate to implement rule given in 6.1.1 (20/3).
	* sem_attr.adb (Analyze_Attribute, case 'Old): Reject prefix of
	'Old in a postcondition, if it is potentially unevaluated and
	it is not an entity name.

2014-01-23  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Document the new "--&pp off" feature of gnatpp.

2014-01-23  Robert Dewar  <dewar@adacore.com>

	* gnatlink.adb (Gnatlink): Fix problem of generating bad name
	msg on VMS.

2014-01-23  Bob Duff  <duff@adacore.com>

	* g-dynhta.ads: Minor comment fix.

2014-01-23  Yannick Moy  <moy@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Inherit SPARK_Mode
	from spec on body only when not already inherited on spec. Set
	SPARK_Mode from context on body without previous spec.	*
	* sem_prag.adb (Analyze_Pragma): Check placement of pragma on
	library-level entities.  Correct retrieval of entity from
	declaration, for cases where the declaration is not a unit.
	* sem_ch12.adb (Instantiate_Object): Avoid
	calling Is_Volatile_Object on an empty node.

2014-01-23  Robert Dewar  <dewar@adacore.com>

	* gnatlink.adb (Gnatlink): Check for suspicious executable file
	names on windows.

2014-01-23  Robert Dewar  <dewar@adacore.com>

	* a-ngelfu.ads: Remove bad uses of AND which should be AND THEN.
	* sem_res.adb (Check_No_Direct_Boolean_Operators): Don't give
	style errors in instances.
	* g-dynhta.ads (Static_HTable): Comment updates.

2014-01-23  Vincent Celier  <celier@adacore.com>

	* prj-conf.adb (Get_Or_Create_Configuration_File): Do not attempt
	to find a configuration project file when Config_File_Name is
	No_Configuration_File.
	* prj-conf.ads (No_Configuration_File): New constant String.
	* prj-pars.adb (Parse): Call Get_Or_Create_Configuration_File
	with Config_File_Name set to No_Configuration_File, so that
	no existing configuration project file will be used, and the
	configuration project will be only created in memory when
	Add_Default_GNAT_Naming_Scheme is called.
	* projects.texi: Minor reformatting.

2014-01-23  Vincent Celier  <celier@adacore.com>

	* prj-conf.adb (Get_Or_Create_Configuration_File): Never parse
	a config project file if On_Load_Config is not null.
	* prj-pars.adb: Minor comment changes.

2014-01-23  Ed Schonberg  <schonberg@adacore.com>

	* lib-xref.adb (Output_References): Output progenitors of
	synchronized tagged types, for source navigation.

2014-01-23  Robert Dewar  <dewar@adacore.com>

	* exp_util.adb, sinfo.adb, sinfo.ads, sem.adb, sem_res.adb,
	expander.adb, exp_ch11.adb, exp_ch11.ads, sem_ch11.adb, sem_ch11.ads,
	sprint.adb, sprint.ads: Remove unused node N_Subprogram_Info.

2014-01-23  Emmanuel Briot  <briot@adacore.com>

	* prj-conf.adb (Get_Or_Create_Configuration_File): call
	On_Load_Config later.

2014-01-23  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Analyze_Declarations): Do not
	generate the spec of the late primitive in ASIS mode. Add two
	comments to explain the special cases when the expansion is
	not performed.

2014-01-23  Robert Dewar  <dewar@adacore.com>

	* sem_util.adb (Note_Possible_Modification): Fix error of
	misbehaving for implicit dereference cases in -gnatc mode.

2014-01-23  Emmanuel Briot  <briot@adacore.com>

	* prj-pars.adb: Minor reformatting.

2014-01-22  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): A subprogram
	body generated for an expression function within a protected body
	needs a set of renaming declarations if the expression function
	comes from source.

2014-01-22  Ed Schonberg  <schonberg@adacore.com>

	* lib-xref.adb (Get_Type_Reference): In semantics-only mode,
	list interface progenitor of a tagged concurrent type, for better
	source navigation.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* lib.adb (In_Extended_Main_Code_Unit): Return False for
	Standard_Location.
	(In_Extended_Main_Source_Unit): Return False for Standard_Location.
	* lib.ads (In_Extended_Main_Code_Unit): Add documentation on
	treatment of Slocs No_Location and Standard_Location.
	* restrict.adb (Check_Restriction_No_Dependence): Explicitly
	check for entity with Standard_Location Sloc, rather than relying
	on Lib routines to do that.
	* sem_res.adb (Resolve_Call): Implement SPARK_05 restriction
	that a call cannot occur before a later occuring body within
	the same unit.

2014-01-22  Thomas Quinot  <quinot@adacore.com>

	* rtsfind.adb: Update comment.

2014-01-22  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_aux.ads, sem_aux.adb (Is_Body): New routine.
	* sem_ch3.adb (Analyze_Declarations): Add local variable
	Body_Seen. Generate the spec of a late controlled
	primitive body that is about to freeze its related type.
	(Handle_Late_Controlled_Primitive): New routine.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* a-stream.adb: Minor reformatting.

2014-01-22  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch8.adb (From_Actual_Package): Introduce a recursive
	sub-procedure Declared_In_Actual to handle properly the visibility
	of actuals in actual packages, that are themselves actuals to a
	actual package of the current instance. This mimics properly the
	visibility of formals of formal packages declared with a box,
	within the corresponding generic unit.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* checks.adb: Do not assume that a volatile variable is valid.

2014-01-22  Thomas Quinot  <quinot@adacore.com>

	* g-catiio.ads (Image, Value): Clarify that these functions
	operate in the local time zone.  Minor documentation update.

2014-01-22  Thomas Quinot  <quinot@adacore.com>

	* csets.adb, csets.ads, opt.ads: Minor documentation fixes.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* sem_aux.adb, sem_aux.ads, sem_ch3.adb (Has_Unconstrained_Elements):
	Moved to sem_aux.adb.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* vms_data.ads: Minor reformatting.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* debug.adb: Document messages affected by -gnatd.E including
	the new ones that relate to late definition of equality.
	* sem_ch6.adb (Check_Untagged_Equality): In Ada 2012 mode, if
	debug flag -gnatd.E is set, then generate warnings rather than
	errors.
	(Check_Untagged_Equality): In earlier versions of Ada,
	generate warnings if Warn_On_Ada_2012_Incompatibility flag is set.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Usage_Error): Output additional messages for
	unconstrained OUT parameters lacking an input dependency.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* sem_ch4.adb: Minor reformatting.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* restrict.ads: Minor reformatting.
	* sem_res.adb (Resolve_Call): Check for SPARK_05 restriction that
	forbids a call from within a subprogram to the same subprogram.

2014-01-22  Thomas Quinot  <quinot@adacore.com>

	* a-stream.ads (Read_SEA, Write_SEA): New subprograms, optimized
	stream attributes for Stream_Element_Array.
	* a-stream.adb (Read_SEA, Write_SEA): Bodies for the above.
	* rtsfind.adb (Check_CRT): Do not reject a reference to an entity
	defined in the current scope.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* debug.adb, exp_ch4.adb, erroutc.adb: Minor reformatting.

2014-01-22  Thomas Quinot  <quinot@adacore.com>

	* sem_ch7.adb, sem_ch8.adb, exp_ch3.adb: Minor reformatting.

2014-01-22  Thomas Quinot  <quinot@adacore.com>

	* sem_ch3.adb (Analyze_Object_Declaration): For a constant
	declaration initialized with a function call, whose type
	has variable size, need to remove side effects so that the
	initialization expression becomes a dereference of a temporary
	reference to the function result.

2014-01-22  Yannick Moy  <moy@adacore.com>

	* errout.adb (Initialize): Remove trick to add dummy entry
	in Warnings table.
	* erroutc.adb (Set_Warnings_Mode_Off,
	Set_Warnings_Mode_On): Do nothing if warnings are suppressed by
	command line switch.
	* opt.ads (Warning_Mode): Document behavior
	wrt pragma Warnings, in normal mode and in GNATprove_Mode.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, errout.adb, erroutc.adb: Minor reformatting.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* sem_ch13.adb (Check_Pool_Size_Clash): New procedure
	(Analyze_Attribute_Definition_Clause, case Storage_Pool): call
	Check_Pool_Size_Clash (Analyze_Attribute_Definition_Clause,
	case Storage_Size): call Check_Pool_Size_Clash.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, exp_util.adb, sem_dim.adb, sem_elab.adb, sem_ch8.adb,
	sem_eval.ads: Minor reformatting.

2014-01-22  Thomas Quinot  <quinot@adacore.com>

	* sem_eval.adb (Compile_Time_Known_Bounds): Return False for
	Any_Composite to prevent cascaded errors.

2014-01-22  Yannick Moy  <moy@adacore.com>

	* errout.adb (Initialize): Do not insert special entry in Warnings
	table in GNATprove_Mode.
	* erroutc.adb (Set_Warnings_Mode_On): Add info in Warnings table in
	GNATprove_Mode.
	* gnat1drv.adb (Adjust_Global_Switches): Do not suppress frontend
	warnings anymore.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Analyze_Initializes_In_Decl_Part): Handle null
	initializes case.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* snames.ads-tmpl: Update header.

2014-01-22  Thomas Quinot  <quinot@adacore.com>

	* exp_util.adb (Insert_Actions): When inserting actions on a
	short circuit operator that has already been analyzed, do not park
	actions in node; instead introduce an N_Expression_With_Actions
	and insert actions immediately.
	Add guard for unexpected case of climbing up through statement
	in Actions list of an N_Expression_With_Actions.
	* sem_elab.adb (Insert_Elab_Check): Remove complex
	specialized circuitry for the case where the context is already
	analyzed, as it is not needed and introduces irregularities in
	finalization. Instead rely on the above change to Insert_Actions
	to ensure that late insertion on short circuit operators works
	as expected.

2014-01-22  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Operator_Check): Improve error message when an
	operand of concatenation is an access type.

2014-01-22  Thomas Quinot  <quinot@adacore.com>

	* sem_dim.adb (Analyze_Dimension_Identifier): Add guard against
	cascaded error.

2014-01-22  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch8.adb (Find_Selected_Component): Handle properly the case
	of an expanded name in a proper body, whose prefix is a package
	in the context of the proper body, when there is a homonym of
	the package declared in the parent unit.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* sem_warn.adb (Check_Use_Clause): Don't give no entities used
	msg if errors found.
	(Check_One_Unit): Same change.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* ug_words: Add missing/wrong entries for VMS warning switches.
	* sem_prag.adb (Check_Duplicate_Pragma): Avoid flagging parent type.

2014-01-22  Jerome Guitton  <guitton@adacore.com>

	* mlib-tgt-specific-vxworks.adb (Get_Target_Suffix): Replace xscale by
	arm.

2014-01-22  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi, gnat_ugn.texi: Document passive task optimization

2014-01-22  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/Makefile.in: Minor fixes.

2014-01-21  Robert Dewar  <dewar@adacore.com>

	* par-ch4.adb (P_If_Expression): Rewritten to improve error recovery.
	* par-ch5.adb (P_Condition): New version with expression prescanned.
	* par.adb (P_Condition): New version with expression prescanned.

2014-01-21  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document that Allow_Integer_Address is ignored
	if Address is not a private type.
	* sem_prag.adb (Analyze_Pragma, case Allow_Integer_Address):
	Ignore pragma if System.Address is not a private type.

2014-01-21  Arnaud Charlet  <charlet@adacore.com>

	* namet.ads (Name_Len): Initialize to 0 to avoid accessing an
	uninitialized value.

2014-01-21  Thomas Quinot  <quinot@adacore.com>

	* gnat_rm.texi (Scalar_Storage_Order): Update documentation.

2014-01-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb (Set_Instance_Env): In Ada 2012 mode, preserve
	the value of Assertions_Enabled flag when compiling an instance of
	an internal unit. This facilitates the use of pre/postconditions
	in generic internal units, such as the new elementary function
	libraries.

2014-01-21  Robert Dewar  <dewar@adacore.com>

	* exp_aggr.adb: Minor reformatting.
	* sem_attr.adb: Minor reformatting.
	* sem_res.adb: Minor comment addition.
	* einfo.adb: Minor comment updates.
	* freeze.adb: Minor reformatting and code reorganization.

2014-01-21  Ed Schonberg  <schonberg@adacore.com>

	* par-ch4.adb (P_If_Expression): Handle more gracefully an
	elsif clause that does not have an else part.

2014-01-21  Robert Dewar  <dewar@adacore.com>

	* checks.adb, sem_util.ads, sem_ch4.adb: Minor reformatting.
	* gcc-interface/Makefile.in: clean up target pairs.

2014-01-21  Pascal Obry  <obry@adacore.com>

	* projects.texi: Minor typo fix.

2014-01-21  Thomas Quinot  <quinot@adacore.com>

	* freeze.adb (Check_Component_Storage_Order): If a record type
	has an explicit Scalar_Storage_Order attribute definition clause,
	reject any component that itself is of a composite type and does
	not have one.

2014-01-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch10.adb (Generate_Parent_Reference): Make public so it
	can be used to generate proper cross-reference information for
	the parent units of proper bodies.

2014-01-21  Thomas Quinot  <quinot@adacore.com>

	* exp_pakd.adb (Expand_Packed_Element_Set,
	Expand_Packed_Element_Reference): No byte swapping required in
	the front-end for the case of a reverse storage order array,
	as this is now handled uniformly in the back-end.  However we
	still need to swap back an extracted element if it is itself a
	nested composite with reverse storage order.

2014-01-21  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_External_Property): Add processing for "others".
	(Analyze_Pragma): Update the grammar of pragma Abstract_State to
	include "others".

2014-01-21  Arnaud Charlet  <charlet@adacore.com>

	* gnat_ugn.texi: Minor updates.

2014-01-21  Thomas Quinot  <quinot@adacore.com>

	* exp_pakd.adb: Update comment, minor reformatting.

2014-01-21  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch3.adb (Analyze_Variable_Contract): Trigger the volatile
	object check when SPARK_Mode is on.
	* sem_ch6.adb (Process_Formals): Trigger the volatile object
	check when SPARK_Mode is on.
	* sem_ch12.adb (Instantiate_Object): Trigger the volatile object
	check when SPARK_Mode is on.
	* sem_ch13.adb (Analyze_Aspect_Specifications): Insert the
	corresponding pragma of aspect SPARK_Mode in the visible
	declarations of a package declaration.
	* sem_prag.adb (Analyze_Pragma): Trigger the volatile object
	check when SPARK_Mode is on.
	* sem_res.adb (Resolve_Actuals): Trigger the volatile object
	check when SPARK_Mode is on.
	(Resolve_Entity_Name): Trigger
	the volatile object check when SPARK_Mode is on.

2014-01-21  Robert Dewar  <dewar@adacore.com>

	* sem_ch3.adb, sem_prag.adb, sem_prag.ads, sem_ch12.adb, sem_res.adb,
	sem_ch6.adb, a-except-2005.adb: Minor reformatting.

2014-01-21  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch3.adb (Expand_N_Object_Declaration): When a class-wide
	object is declared, it is rewritten as a renaming of an dynamic
	expression that wraps the initial value.  The renaming declaration
	is first given an internal name, to prevent collisions with the
	entity already declared, and then the name is modified to reflect
	the original one. the modification of the name must preserve
	the source location of the original, to prevent spurious errors
	when compiling with style checks if the declaration involves
	more than one entity.

2014-01-21  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.adb Add entries for Async_Readers, Async_Writers,
	Effective_Reads and Effective_Writes in table Canonical_Aspect.
	* aspects.ads Add entries for Async_Readers, Async_Writers,
	Effective_Reads and Effective_Writes in tables Aspect_Id,
	Aspect_Names, Aspect_Delay and Implementation_Defined_Aspect.
	* atree.adb (Ekind_In): New version with 8 parameters.
	(Node34): New routine.
	(Set_Node34): New routine.
	* atree.ads (Ekind_In): New version with 8 parameters.
	(Node34): New routine.
	(Set_Node34): New routine.
	* einfo.adb Contract is now Node34.
	(Contract): Update the assertion and node usage.
	(Get_Pragma): Include pragmas Async_Readers, Async_Writers,
	Effective_Reads and Effective_Writes.
	(Set_Contract): Update the assertion and node usage.
	(Write_Field24_Name): Remove the output for a contract.
	(Write_Field34_Name): Add output for a contract.
	* einfo.ads Contract is now Node34. Update the comment on
	attribute usage and related node structures.
	(Get_Pragma): Update the comment on usage.
	* par-prag.adb (Prag): Pragmas Async_Readers, Async_Writers,
	Effective_Reads and Effective_Writes do not require special
	processing by the parser.
	* sem_ch3.adb (Analyze_Variable_Contract): New routine.
	(Analyze_Declarations): Analyze the contract of a variable at
	the end of the declarative region.
	(Analyze_Object_Declaration): Create a contract for a variable.
	* sem_ch6.adb (Analyze_Subprogram_Contract): Update the retrieval
	of classification pragmas.
	(Process_Formals): Detect an illegal
	use of a volatile object as a formal in a function.
	* sem_ch12.adb (Instantiate_Object): Detect an illegal use of
	a volatile object as an actual in generic instantiation.
	* sem_prag.adb Add entries for Async_Readers, Async_Writers,
	Effective_Reads and Effective_Writes in table Sig_Flags.
	(Analyze_External_State_In_Decl_Part): New routine.
	(Analyze_Global_Item): Detect an illegal use of a volatile object
	as a global item of a function.
	(Analyze_Pragma): Reimplement
	pragma Abstract_State. Add support for pragmas Async_Readers,
	Async_Writers, Effective_Reads and Effective_Writes.
	(Check_External_Properties): New routine.
	* sem_prag.ads (Analyze_External_State_In_Decl_Part): New routine.
	(Check_External_Properties): New routine.
	* sem_res.adb (Resolve_Actuals): Detect an illegal use of a
	volatile object as an actual in a call.
	(Resolve_Entity_Name):
	Add local variables Par, Prev and Usage_OK. Detect illegal
	contexts of volatile objects.
	* sem_util.adb (Add_Contract_Item): Add support for
	pragmas associated with the contract of a variable.
	(Async_Readers_Enabled): New routine.
	(Async_Writers_Enabled): New routine.
	(Effective_Reads_Enabled): New routine.
	(Effective_Writes_Enabled): New routine.
	(Has_Enabled_Property):
	New routine.
	(Is_Unchecked_Conversion_Instance): New routine.
	(Is_Volatile_Object): Add support for entities that may denote
	a volatile object.
	* sem_util.ads (Add_Contract_Item): Update the
	comment on usage.
	(Async_Readers_Enabled): New routine.
	(Async_Writers_Enabled): New routine.
	(Effective_Reads_Enabled): New routine.
	(Effective_Writes_Enabled): New routine.
	(Is_Unchecked_Conversion_Instance): New routine.
	* sinfo.ads Update the comment on the structure of N_Contract.
	* snames.ads-tmpl Add predefined names for Async_Readers,
	Async_Writers, Effective_Reads and Effective_Writes. Add
	pragma ids for Async_Readers, Async_Writers, Effective_Reads
	and Effective_Writes.

2014-01-21  Robert Dewar  <dewar@adacore.com>

	* exp_ch4.adb (Eval_Op_Expon): Use CRT_Safe_Compile_Time_Known_Value
	* sem_eval.adb (Compile_Time_Known_Value): Remove special
	handling of CRT mode (CRT_Safe_Compile_Time_Known_Value): New
	function (Eval_Op_Expon): Add CRT_Safe in call to Test_Foldable
	(Test_Foldable): Add CRT_Safe parameter
	* sem_eval.ads (Compile_Time_Known_Value): Remove special
	handling of CRT mode.
	(CRT_Safe_Compile_Time_Known_Value): New function.

2014-01-21  Robert Dewar  <dewar@adacore.com>

	* sem_prag.adb (Analyze_Pragma, case SPARK_Mode): Fix problem
	with pragma or aspect that applies to package spec or subprogram
	spec.

2014-01-21  Robert Dewar  <dewar@adacore.com>

	* exp_aggr.adb: Minor reformatting.

2014-01-21  Johannes Kanig  <kanig@adacore.com>

	* gnat1drv.adb (Gnat1drv) remove obsolete reference to -gnatd.H.

2014-01-21  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Document the "checks" attribute in gnat2xml.

2014-01-21  Steve Baird  <baird@adacore.com>

	* gnat_rm.texi: Improve description of SPARK_Mode pragma.

2014-01-21  Vincent Celier  <celier@adacore.com>

	* prj-part.adb (Parse_Single_Project): Accept to extend a project
	if it has only be imported by an project being extended. When a
	project that has only been imported by a project being extended
	is imported by another project that is not being extended,
	reset the previous indication, so that it will be an error if
	this project is extended later.
	* prj-tree.adb (Create_Project): Include component From_Extended
	in table Projects_HT
	* prj-tree.ads (Project_Name_And_Node): New Boolean component
	From_Extended

2014-01-21  Robert Dewar  <dewar@adacore.com>

	* atree.ads, atree.adb: Add Node33 and Set_Node33.
	* einfo.ads, einfo.adb (SPARK_Pragma): New field (SPARK_Aux_Pragma):
	New field (SPARK_Pragma_Inherited): New flag
	(SPARK_Aux_Pragma_Inherited): New flag (SPARK_Mode_Pragmas):
	Removed.
	* lib.ads, lib.adb: Remove SPARK_Mode_Pragma, no longer used.
	* opt.ads (SPARK_Mode_Pragma): New global variable.
	* sem.ads: Add Save_SPARK_Mode_Pragma field to Scope_Stack_Entry.
	* sem_ch3.adb: Use new SPARK_Mode data structures.
	* sem_ch6.adb: Set SPARK_Mode fields in subprogram specs and bodies.
	* sem_ch7.adb: Set SPARK_Mode fields in package spec and body entities.
	* sem_ch8.adb (Push_Scope): Save SPARK_Mode_Pragma.
	(Pop_Scope): Restore SPARK_Mode_Pragma.
	* sem_prag.adb (Analyze_Pragma, case SPARK_Mode): Rewrite for
	new data structures.

2014-01-21  Arnaud Charlet  <charlet@adacore.com>

	* back_end.adb: Undo previous change, not needed. Minor reformatting.

2014-01-21  Thomas Quinot  <quinot@adacore.com>

	* exp_ch5.adb: Fix comment.
	* switch-c.adb: Minor comment update.
	* exp_ch3.adb: Minor reformatting.

2014-01-21  Arnaud Charlet  <charlet@adacore.com>

	* back_end.adb (Scan_Compiler_Arguments): Do not store object
	filename in gnatprove mode.

2014-01-21  Thomas Quinot  <quinot@adacore.com>

	* sinfo.ads (No_Ctrl_Actions): Clarify documentation (flag also
	suppresses usage of primitive _assign for tagged types).
	* exp_aggr.adb (Build_Array_Aggr_Code.Gen_Assign): Set
	No_Ctrl_Actions for a tagged type that does not require
	finalization, as we want to disable usage of _assign (which
	may cause undesirable discriminant checks on an uninitialized,
	invalid target).

2014-01-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_prag.adb: Reject invariant'class on completion.

2014-01-21  Javier Miranda  <miranda@adacore.com>

	* exp_ch3.adb (Build_Init_Procedure): For
	derivations of interfaces, do not move the the initialization
	of the _parent field since such assignment is not generated.

2014-01-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Rewrite_Renamed_Operator): Do not replace entity
	with the operator it renames if we are within an expression of
	a pre/postcondition, because the expression will be reanalyzed
	at a later point, and the analysis of the renaming may affect
	the visibility of the operator when in an instance.

2014-01-21  Robert Dewar  <dewar@adacore.com>

	* sinfo.ads, sinfo.adb: Change Do_Discriminant_Check to use new Flag1.
	Add this flag to type conversion nodes and assignment nodes.
	* treepr.adb: Deal properly with Flag 1,2,3.
	* treeprs.adt: Minor comment update.

2014-01-21  Robert Dewar  <dewar@adacore.com>

	* sem_eval.adb (Compile_Time_Known_Value): Add Ignore_CRT
	parameter.
	* sem_eval.ads (Compile_Time_Known_Value): Add Ignore_CRT
	parameter, completely rewrite spec.

2014-01-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch10.adb (Install_Withed_Unit): If the unit is a subprogram
	instance that is inlined, it may have been rewritten as a wrapper
	package. In that case the unit that must be made visible is the
	related instance of the package.

2014-01-21  Arnaud Charlet  <charlet@adacore.com>

	* exp_ch9.adb (Expand_N_Selective_Accept.Add_Accept): Refine
	previous change in codepeer mode.

2014-01-21  Arnaud Charlet  <charlet@adacore.com>

	* exp_ch9.adb (Expand_N_Selective_Accept.Add_Accept): Always add
	call to Abort_Undefer, as expected by the runtime.
	* s-tasren.adb (Local_Complete_Rendezvous): Replace
	Defer_Abort_Nestable by Defer_Abort, since we do not expect abort to be
	deferred at this point. Update comments.

2014-01-21  Thomas Quinot  <quinot@adacore.com>

	* exp_ch4.adb, exp_ch5.adb, checks.adb: Minor reformatting.

2014-01-21  Arnaud Charlet  <charlet@adacore.com>

	* switch-c.adb, usage.adb, gnat_ugn.texi: Mark -gnates as internal,
	remove from doc.

2014-01-21  Robert Dewar  <dewar@adacore.com>

	* switch-c.adb, usage.adb, atree.adb, atree.ads: Minor reformatting.

2014-01-21  Thomas Quinot  <quinot@adacore.com>

	* atree.adb, atree.ads (Num_Extension_Nodes): Switch to Node_Id, since
	this is value is used in Node_Id arithmetic operations.
	(Copy_Node, Exchange_Entities): Use loops indexed by Num_Extension_Nodes
	instead of hard-coded unrolled code.

2014-01-21  Yannick Moy  <moy@adacore.com>

	* gnat1drv.adb: Minor code cleanup, removing useless code.

2014-01-21  Arnaud Charlet  <charlet@adacore.com>

	* opt.ads (SPARK_Switches_File_Name): New.
	* switch-c.adb (Scan_Front_End_Switches): Add handling of -gnates=xxx *
	* usage.adb (Usage): Document -gnates, in gnatprove mode only.
	* gnat_ugn.texi: Document -gnates.

2014-01-21  Yannick Moy  <moy@adacore.com>

	* errout.adb (Special_Msg_Delete): Update comment. Remove
	special case for GNATprove which should not ignore mismatch
	in sizes for representation clauses.
	* sem_prag.adb (Analyze_Pragma): Remove special case for GNATprove
	which should not ignore pragma Pack.

2014-01-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb: Code clean up.

2014-01-21  Steve Baird  <baird@adacore.com>

	* gnat_rm.texi: Improve GNAT RM description of SPARK_Mode pragma.

2014-01-21  Robert Dewar  <dewar@adacore.com>

	* gcc-interface/gigi.h: Get Flags array address.
	* gcc-interface/trans.c: Acquire Flags array address.
	* atree.adb: Add support for Flags array and Flag0,1,2,3.
	* atree.ads: Add support for Flags array and Flag0,1,2,3.
	* atree.h: Add support for Flags array and Flag0,1,2,3.
	* back_end.adb: Pass Flags array address to gigi.

2014-01-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch8.adb (Attribute_Renaming): Transfer original attribute
	reference to generated body so that legality checks on stream
	attributes are properly applied. If type is tagged and already
	frozen, insert generated body at the point of the renaming
	declaration.

2014-01-21  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb: Code clean up.
	* sem_ch8.adb: Minor reformatting

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* checks.adb: Check SPARK_Mode instead of GNATProve_Mode for
	converting warnings on inevitable exceptions to errors.
	* exp_ch4.adb: Check SPARK_Mode instead of GNATProve_Mode for
	converting warnings on inevitable exceptions to errors.
	* opt.adb (SPARK_Mode_Config): Handled like other config flags
	* opt.ads (SPARK_Mode_Type): Moved here from types (renamed from
	SPARK_Mode_Id) (SPARK_Mode_Type): Add pragma Ordered, remove
	SPARK_ from names (SPARK_Mode): New flag (SPARK_Mode_Config):
	New flag (Config_Switches_Type): Add SPARK_Mode field
	* sem.adb: Minor code reorganization (remove unnecessary with)
	* sem.ads (Scope_Stack_Entry): Add Save_SPARK_Mode field
	* sem_aggr.adb: Check SPARK_Mode instead of GNATProve_Mode for
	converting warnings on inevitable exceptions to errors.
	* sem_attr.adb: Check SPARK_Mode instead of GNATProve_Mode for
	converting warnings on inevitable exceptions to errors.
	* sem_ch3.adb: Check SPARK_Mode instead of GNATProve_Mode for
	converting warnings on inevitable exceptions to errors.
	* sem_ch4.adb: Check SPARK_Mode instead of GNATProve_Mode for
	converting warnings on inevitable exceptions to errors.
	* sem_ch6.adb (Analyze_Subprogram_Body_Helper): Reset SPARK_Mode
	from spec if needed
	* sem_ch7.adb (Analyze_Package_Body_Helper): Reset SPARK_Mode
	from spec if needed
	* sem_ch8.adb (Push_Scope): Save SPARK_Mode (Pop_Scope):
	Restore SPARK_Mode
	* sem_elab.adb: Check SPARK_Mode instead of GNATProve_Mode for
	converting warnings on inevitable exceptions to errors.
	* sem_prag.adb (Get_SPARK_Mode_From_Pragma): New function
	(Get_SPARK_Mode_Id): Removed (Get_SPARK_Mode_Type): New name
	of Get_SPARK_Mode_Id
	* sem_prag.ads (Get_SPARK_Mode_From_Pragma): New function
	* sem_res.adb: Check SPARK_Mode instead of GNATProve_Mode for
	converting warnings on inevitable exceptions to errors.
	* sem_util.adb: Check SPARK_Mode instead of GNATProve_Mode for
	converting warnings on inevitable exceptions to errors.
	* types.ads (SPARK_Mode_Id): Moved to opt.ads and renamed
	SPARK_Mode_Type

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb: Add semantic information to rewritten type
	reference.

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch5.adb (Expand_N_Assignment_Statement): If both sides
	are of a type with unknown discriminants, convert both to the
	underlying view of the type, so that the proper constraint check
	can be applied to the right-hand side.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* atree.adb (Copy_Node): Fix failure to copy last component
	(Exchange_Entities): Fix failure to exchange last entity

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch12.adb: Code clean up.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi, sem_ch4.adb: Minor reformatting.

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch4.adb (Analyze_Quantified_Expression): If after
	pre-analysis  the loop parameter specification has been
	rewritten as a iterator specification, propagate the change to
	the quantified expression, for ASIS navigtion needs.

2014-01-20  Vincent Celier  <celier@adacore.com>

	* par-ch10.adb: Minor error message change: escape [ and ].

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* checks.adb: Make warnings on exceptions into errors in GNATprove mode.
	* errout.adb: Implement [ and ] insertion characters.
	* errout.ads: Document new [ and ] insertion characters.
	* sem_ch12.adb, restrict.adb, frontend.adb, exp_ch7.adb: Minor
	addition of ??? comment.
	* lib-xref.adb, exp_util.adb, gnat1drv.adb: Minor reformatting
	* exp_ch4.adb, sem_ch3.adb, sem_ch4.adb, sem_ch6.adb, sem_elab.adb,
	sem_eval.adb, sem_res.adb, sem_util.adb, sem_attr.adb, sem_aggr.adb:
	Make warnings on exceptions into errors in GNATprove mode.
	* sem_dim.adb: Minor reformatting throughout Quote [ and ]
	in error messages.

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch13.adb: Code clean up.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* errout.ads, errout.adb: Implement >? >x? >X? sequences in error
	messages.
	* sem_ch6.adb (Check_Statement_Sequence): Missing return is an
	error in GNATprove mode.

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* par-ch4.adb (Is_Parameterless_Attribute): The Ada2012 attribute
	reference 'Old takes no parameters, and thus can appear as a
	prefix of a slice.

2014-01-20  Eric Botcazou  <ebotcazou@adacore.com>

	* exp_aggr.adb: Fix minor typos.

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb (Analyze_Attribute, case 'Constrained): In an
	instance the attribute is legal, and its value is determined
	statically if the type has no discriminants. This choice is
	more useful than rechecking the legality rule in the instance,
	is consistent with older usage, and is also consistent with all
	existing tests.

2014-01-20  Arnaud Charlet  <charlet@adacore.com>

	* sem_cat.adb (Validate_Static_Object_Name): Change error into
	warning in Relaxed_Semantic_Mode.

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_attr.adb: Code and comments cleanup.

2014-01-20  Yannick Moy  <moy@adacore.com>

	* debug.adb Free debug flags -gnatd.D, -gnatd.G and -gnatd.V *
	* errout.adb (Compilation_Errors): Remove special handling in
	GNATprove mode.
	* gnat1drv.adb (Adjust_Global_Switches): Remove handling of the
	removed debug flags.
	* gnat_rm.texi: Initial documentation for Abstract_State, Depends,
	Global, Initial_Condition, Initializes and Refined_State pragmas and
	aspects.
	* opt.ads (Frame_Condition_Mode, Formal_Extensions,
	SPARK_Strict_Mode): Remove global flags.
	* sem_ch3.adb (Analyze_Object_Declaration): Check of no hidden state
	always performed now, on packages declaring a null state.
	(Signed_Integer_Type_Declaration): Remove ill-designed attempt
	at providing pedantic mode for bounds of integer types.
	* sem_ch4.adb (Analyze_Quantified_Expression): Warning on suspicious
	"some" quantified expression now issued under control of -gnatw.t,
	like the other warning on unused bound variable.
	* sem_prag.adb (Check_Precondition_Postcondition): Remove useless test
	on removed flag.
	(Analyze_Pragma): Remove tests for SPARK 2014
	pragmas, not officially allowed by GNAT.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Ensure that
	the sole argument of pragmas Abstract_State, Contract_Cases,
	Depends, Global and Initializes in in aggregate form.
	(Analyze_Refined_Pragma): Ensure that the sole argument of
	pragmas Refined_Depends, Refined_Global and Refined_State is in
	aggregate form.
	(Ensure_Aggregate_Form): New routine.

2014-01-20  Doug Rupp  <rupp@adacore.com>

	* sem_attr.adb (Analyze_Attribute): case
	Attribute_Constrained => treat all prefixes as legal for Declib
	compatibility.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Check_Mode): Reimplement the routine.
	(Find_Mode): New routine.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* sem_ch4.adb (Operator_Check): Handle additional
	Allow_Integer_Address cases.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi (Allow_Integer_Address): Remove note about not
	allowed if address is non-private, no longer true.
	* sem_prag.adb (Analyze_Pragma, case Allow_Integer_Address):
	Remove check for address being private, causes difficulty when
	pragma used in gnat.adc file and is not needed, since we guard
	this in Address_Integer_Convert_OK.
	* exp_ch7.adb: Minor reformatting.
	* sem_ch4.adb: Handle operator operands in Allow_Integer_Address mode.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* checks.adb (Apply_Range_Check): Remove gnatprove special
	casing of exponentiation.
	* sem_res.adb (Resolve_Op_Expon): Apply range check to right
	operand for integer case to check range against Natural.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* s-tataat.adb: Minor reformatting.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* einfo.adb (Is_Descendent_Of_Address): Now applies to all
	entities, and also fix documentation to remove mention of visible
	integer type, since this is not what the implementation does.
	* einfo.ads (Is_Descendent_Of_Address): Now applies to all
	entities, and also fix documentation to remove mention of visible
	integer type, since this is not what the implementation does.
	* gnat_rm.texi: Minor clarification of Allow_Integer_Address
	function.
	* sem_ch4.adb (Analyze_One_Call): Handle Allow_Integer_Address
	case for parameter type check.
	* sem_res.adb (Resolve): Use new function
	Address_Integer_Convert_OK.
	* sem_type.adb: Minor code reorganization (use Ekind_In) Minor
	reformatting throughout.
	* sem_util.adb (Address_Integer_Convert_OK): New function.
	* sem_util.ads: Minor reformatting (put specs in alpha order)
	(Address_Integer_Convert_OK): New function.

2014-01-20  Thomas Quinot  <quinot@adacore.com>

	* exp_ch7.adb (Wrap_Transient_Expression):
	Insertion extra conditional expression only if
	Opt.Suppress_Control_Flow_Optimizations is set.

2014-01-20  Arnaud Charlet  <charlet@adacore.com>

	* s-tataat.adb (Initialize_Attributes): Abort might already be
	deferred in Create_Task.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* checks.adb (Apply_Scalar_Range_Check): Flag
	the exponent as requiring a range check when the expression is
	an exponentiation.

2014-01-20  Fedor Rybin  <frybin@adacore.com>

	* gnat_ugn.texi: Documenting --passed-tests option for gnattest.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_util.adb (Default_Initialization): New routine.
	* sem_util.ads: Add new type Default_Initialization_Kind.
	(Default_Initialization): New routine.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Check_Mode): Correct all error
	message logic dealing with in/in out parameters that may appear
	as inputs or have a self reference.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* exp_ch9.adb, checks.adb, exp_intr.adb: Minor reformatting.
	* sem_res.adb (Resolve): Fix error causing infinite loop for
	integer used as address. Allow addresses as integers.

2014-01-20  Arnaud Charlet  <charlet@adacore.com>

	* s-osinte-linux.ads (struct_sigaction): Fix rep clause.

2014-01-20  Bob Duff  <duff@adacore.com>

	* par-ch8.adb (P_Use_Type_Clause): Detect syntax
	error when "use all" is not followed by "type".

2014-01-20  Bob Duff  <duff@adacore.com>

	* exp_intr.adb (Expand_Unc_Deallocation): Remove warning on abort
	followed by free.

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* checks.adb (Apply_Address_Clause_Check): If there is an
	alignment check on the expression in an address clause, and there
	is no local exception propagation, add an additional explanatory
	message to clarify the cause of previous warning.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* exp_ch7.adb: Minor reformatting.
	* opt.ads: Minor comment updates.
	* sem.adb: Minor name change Is_Main_Unit =>
	Is_Main_Unit_Or_Main_Unit_Spec.
	* sem_ch6.adb: Minor reformatting and code reorganization.

2014-01-20  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Update gnatpp switches.

2014-01-20  Thomas Quinot  <quinot@adacore.com>

	* exp_ch9.adb: Minor comment edit.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document that Allow_Integer_Address is permitted
	only if System.Address is a private type.
	* opt.ads (Allow_Integer_Address): No longer set by -gnates.
	* sem_prag.adb (Analyze_Pragma, case Allow_Integer_Address):
	Allowed only if type System.Address is private, since otherwise
	it makes no sense.
	* sem_res.adb: Fix failure to properly Analyze unchecked
	conversions that were introduced by Allow_Integer_Address.
	* switch-c.adb: Remove -gnates switch.
	* usage.adb: Remove -gnates switch.
	* gnat_ugn.texi: Remove documentation of -gnates flag.

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_ch6.adb (Analyze_Expression_Function): Pre-analyze and
	resolve expression to perform proper name capture.

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* sem.adb (Semantics): When saving/restoring configuration
	switches, the spec of a pre- defined unit that is the main unit
	must be treated as a predefined unit as well.

2014-01-20  Thomas Quinot  <quinot@adacore.com>

	* exp_ch7.adb (Wrap_Transient_Expression): For a Boolean
	expression, insert an extra conditional expression when saving
	the value of the expression, for the benefit of control flow
	graph based coverage analysis.
	* exp_ch3.adb: Minor reformatting.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* gnat1drv.adb: Set Allow_Integer_Address in relaxed semantics mode.
	* gnat_rm.texi: Document pragma Allow_Integer_Address.
	* gnat_ugn.texi: Document pragma Allow_Integer_Address, -gnates.
	* opt.ads: New flag Allow_Integer_Address.
	* par-prag.adb: Dummy entry for pragma Allow_Integer_Address.
	* sem_ch5.adb: Minor reformatting.
	* sem_prag.adb: Implement pragma Allow_Integer_Address.
	* sem_res.adb (Resolve): Allow integer address value if
	switch set.
	* sem_util.adb: Minor reformatting.
	* snames.ads-tmpl: Add entry for pragma Allow_Integer_Address.
	* switch-c.adb: Recognize flag -gnates.
	* usage.adb: Document flag -gnates.

2014-01-20  Thomas Quinot  <quinot@adacore.com>

	* s-tadeca.adb: Fix minor typos in comment.

2014-01-20  Pascal Obry  <obry@adacore.com>

	* s-win32.ads (FreeLibrary): New import.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* sem_res.adb, sem_cat.adb: Minor reformatting.
	* sem_ch11.adb (Analyze_Raise_Statement): Only give warning about
	assigning to OUT parameters for the current subprogram scope.
	* exp_ch4.adb: Minor reformatting.

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* exp_ch4.adb (Process_Transient_Object,
	Find_Enclosing_Contexts): If the top-level if-expression that
	generated the transient object is an actual in a call, the proper
	Hook_Context is a construct enclosing the call.
	* einfo.ads: Indicate that Related_Expression is used to link a
	loop variable to the container expression over which the loop
	takes place.
	(Analyze_Iterator_Specification): Set the Related_Expression of
	the loop variable in a container element iterator.
	(Note_Possible_Modification): If the variable is the loop
	variable in a container element iterator, indicate that the
	enclosing container is also modified.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* aspects.adb (Move_Or_Merge_Aspects): Reimplemented.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* s-taasde.ads, gnat_ugn.texi, s-tadeca.adb, sem_res.adb, s-tadeca.ads:
	Minor reformatting and code clean up.

2014-01-20  Arnaud Charlet  <charlet@adacore.com>

	* sem_cat.adb (Validate_Object_Declaration): Relax semantics
	of objects of private type if Relaxed_RM_Semantics.

2014-01-20  Claire Dross  <dross@adacore.com>

	* a-cofove.ads (Vector): Capacity discriminant
	should be in range of the index.

2014-01-20  Thomas Quinot  <quinot@adacore.com>

	* a-caldel.ads(To_Duration), s-taasde.ads(Time_Enqueue):
	Clarify specs s-tadeca.adb(Enqueue_Calendar): Compensate for
	possible difference between epoch of Ada.Calendar clock and Ada
	real-time/tasking clock.
	* s-taprop-posix.adb: Minor comment fix.

2014-01-20  Doug Rupp  <rupp@adacore.com>

	* sysdep.c [vxworks]: Remove Vxworks version noise for RTP.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_attr.adb (Expand_N_Attribute_Reference): Generate validity
	checks on the prefix of attribute 'Old.
	* sem_ch3.adb (Process_Range_Expr_In_Decl): Suppress the
	generation of validity checks on a range that belongs to the
	iteration scheme of a quantified expression.
	* sem_ch5.adb (One_Bound): Suppress the generation of validity
	checks on a bound that belongs to the iteration scheme of a
	quantified expression, generate the check in all other cases.

2014-01-20  Bob Duff  <duff@adacore.com>

	* gnat_ugn.texi: Enable --pp-new by default. Minor reorganization.

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_res.adb (Resolve): When compiling a predefined unit, ignore
	interpretations that do not come from other predefined units,
	to prevent spurious ambiguities in the presence of user-defined
	operators in the context of (an instance of) a predefined unit.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Document that Loop_Variant is included in
	Statement_Assertions.
	* sem_prag.adb (Check_Kind): Add Loop_Variant to
	Statement_Assertions (Check_Applicable_Policy): Add Loop_Variant
	to Statement_Assertions.

2014-01-20  Doug Rupp  <rupp@adacore.com>

	* sysdep.c (__gnat_is_file_not_found_error) [vxworks6]: Add case
	for errno ENOENT from RTP on NFS mounted file system.

2014-01-20  Ed Schonberg  <schonberg@adacore.com>

	* sem_util.adb (Check_Function_Writable_Actuals): 1) Do not
	examine code that does not come from source. The check does not
	apply to code generated for constraint checks, and such code may
	generate spurious error messages when compiled with expansion
	disabled (as in a generic unit) because side effects may not
	have been removed.
	2) Make error messages more explicit: indicate the component
	of the	construct whose value is indeterminate because of a
	call to a function with in-out parameter in another component,
	when there is no mandated order of execution between the two
	components (actuals, aggregate components, alternatives).

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* gnat_rm.texi: Minor cleanup.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_attr.adb (Analyze_Attribute): Attributes 'Old and 'Result
	can now apply to a refined postcondition.
	* sem_ch6.adb (Analyze_Subprogram_Contract): Remove local
	variable Result_Seen. Add variables Case_Prag, Post_Prag,
	Seen_In_Case and Seen_In_Post. Update the mechanism that detects
	whether postconditions and/or constract-cases mention attribute
	'Result and introduce a post-state when applied to functions.
	(Check_Result_And_Post_State): Removed.
	* sem_prag.adb (Analyze_Pragma): Add local variable
	Result_Seen. Verify that the expression of pragma Refined_Post
	mentions attribute 'Result and introduces a post-state.
	* sem_util.ads, sem_util.adb (Check_Result_And_Post_State): New routine.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch7.adb (Is_Subprogram_Call): New routine.
	(Process_Transient_Objects): Make variable Must_Hook global with
	respect to all locally declared subprograms. Search the context
	for at least one subprogram call.
	(Requires_Hooking): Removed.

2014-01-20  Claire Dross  <dross@adacore.com>

	* a-cfdlli.ads a-cfhama.ads a-cfhase.ads a-cforma.ads
	* a-cforse.ads a-cofove.ads: Add pragma Annotate (GNATprove,
	External_Axiomatization);

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* sem_attr.adb (Analyze_Attribute, case Loop_Entry): Allow
	Loop_Entry in Assert, Assert_And_Cut, and Assume pragmas.
	* sem_prag.adb (Analyze_Pragma, case Assert[_And_Cut], Assume):
	Allow Loop_Entry to be used in these pragmas if they appear in
	an appropriate context.
	(Placement_Error): Specialize error
	message for pragma Assert[_And_Cut] or pragma Assume containing
	Loop_Entry attribute.
	* a-exexpr-gcc.adb, sinput.adb: Minor reformatting.
	* s-excmac-arm.ads, s-except.ads, s-excmac-gcc.ads: Minor reformatting
	and code clean ups.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* gnat1drv.adb: Minor comment update.

2014-01-20  Tristan Gingold  <gingold@adacore.com>

	* raise-gcc.c (PERSONALITY_FUNCTION/arm): Remove unused
	variables, comment out unused code.
	* a-exexpr-gcc.adb: Move declarations to s-excmac-gcc.ads
	* s-excmac-gcc.ads: New file, extracted from a-exexpr-gcc.adb
	* s-excmac-arm.ads: New file.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Expand_N_Slice): Remove constant D and variables
	Drange and Index_Typ. Remove the circuitry which creates a
	range check to compare the index type of the array against the
	discrete_range.
	* sem_res.adb (Resolve_Slice): Add local variable Dexpr. Update
	the circuitry which creates a range check to handle a
	discrete_range denoted by a subtype indication.

2014-01-20  Pierre-Marie Derodat  <derodat@adacore.com>

	* sinput.adb, sinput.ads (Sloc_Range): Traverse the tree of original
	nodes to get the original sloc range.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_prag.adb (Analyze_Pragma): Use Defining_Entity to obtain the
	entity of a [library level] package.

2014-01-20  Tristan Gingold  <gingold@adacore.com>

	* raise-gcc.c (exception_class_eq): New function.
	(is_handled_by): Use it to compare exception classes.
	(PERSONALITY_STORAGE): Define.	(continue_unwind): New function to
	be called to return URC_CONTINUE_UNWIND.
	(personality_body): New function, extracted from PERSONALITY_ROUTINE.
	(PERSONALITY_ROUTINE): Add an implementation for the ARM unwinder.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* opt.ads: Minor comment update.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* exp_ch4.adb (Expand_N_Slice): Relocate some variables and
	constants to the "Local variables" area. Add new constant D. Add
	new variables Drange and Index_Typ.  Rename Pfx to Rep and Ptp
	to Pref_Typ and update all occurrences. Add circuitry to extract
	the discrete_range and the index type and build a range check.

2014-01-20  Arnaud Charlet  <charlet@adacore.com>

	* gnat1drv.adb (Adjust_Global_Switches): Enable
	Treat_Categorization_Errors_As_Warnings when Relaxed_RM_Semantics
	is set.

2014-01-20  Thomas Quinot  <quinot@adacore.com>

	* sem_ch5.adb, sem_ch4.adb: Minor reformatting.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* sem_ch13.adb (Analyze_Aspect_Specifications):
	When aspect SPARK_Mode appears on a package body, insert the
	generated pragma at the top of the body declarations.

2014-01-20  Robert Dewar  <dewar@adacore.com>

	* sem_aggr.adb, exp_prag.adb, sem_aux.adb, sinfo.ads, sem_ch10.adb,
	checks.adb, sem_prag.adb, sem_ch12.adb, freeze.adb, g-arrspl.adb,
	expander.adb, gnat1drv.adb, exp_ch4.adb, sem_ch6.adb,
	sem_ch8.adb, exp_dist.adb: Minor reformatting.

2014-01-20  Yannick Moy  <moy@adacore.com>

	* gnat1drv.adb (Gnat1drv): Call Write_ALI with Object=True in GNATprove
	mode.

2014-01-20  Pascal Obry  <obry@adacore.com>

	* g-arrspl.ads (Slice_Set): New definition (will use a copy on
	write scheme).
	* g-arrspl.adb: Adapt all routine to this new implementation.
	(Set): Copy the Slice_Set definition before reusing it.

2014-01-20  Arnaud Charlet  <charlet@adacore.com>

	* sem_prag.adb (Process_Import_Or_Interface): In
	Relaxed_RM_Semantics, support old Ada 83 style of pragma Import.
	(Analyze_Pragma): Ditto for pragma Export.
	* exp_prag.adb (Expand_Pragma_Import_Or_Interface): Handle old pragma
	Import style.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.ads: E_Abstract_State is now part of the entities that
	can be overloaded. Update type Overloadable_Kind to reflect the
	inclusion of abstract states.
	* sem_ch6.adb (New_Overloaded_Entity): A function can now
	overload an abstract state.
	* sem_prag.adb (Analyze_Constituent): Handle the overloading
	of states by functions. Use Entity_Of to obtain the entity of
	a constituent.	(Analyze_Global_Item): Handle the overloading of
	states by functions.
	(Analyze_Initialization_Item): Handle the
	overloading of states by functions.  Use Entity_Of to obtain the
	entity of an item.
	(Analyze_Input_Item): Handle the overloading
	of states by functions. Use Entity_Of to obtain the entity of an item.
	(Analyze_Input_Output): Handle the overloading of states by functions.
	(Analyze_Refinement_Clause): Handle the overloading
	of states by functions.  Use Entity_Of to obtain the entity of an item.
	(Appears_In): Use Entity_Of to obtain the entity of an element.
	(Check_Usage): Use Entity_Of to obtain the entity of
	an item. Add a guard to prevent a crash due to a previous error.
	(Resolve_State): New routine.

2014-01-20  Yannick Moy  <moy@adacore.com>

	* spark_xrefs.ads, debug.adb, gnat1drv.adb, errout.adb, errout.ads,
	opt.ads: Minor comments updates.

2014-01-20  Hristian Kirtchev  <kirtchev@adacore.com>

	* einfo.adb (Non_Limited_View): Applies to abstract states.
	(Set_From_Limited_With): Applies to abstract states.
	(Set_Non_Limited_View): Applies to abstract states.
	(Write_Field17): Output the non-limited view of an abstract state.
	* einfo.ads: Update the comment on usage and occurrences in
	nodes for attributes From_Limited_With and Non_Limited_View.
	* sem_aux.adb (Available_View): This routine can now handle
	abstract states.
	* sem_aux.ads (Available_View): This routine can now handle
	abstract states. Update the comment on usage.
	* sem_ch8.adb (Find_Expanded_Name): Handle abstract views
	of states and variables.
	(In_Pragmas_Depends_Or_Global): New routine.
	* sem_ch10.adb (Build_Limited_Views): Implement
	abstract (limited) views of variables and states.
	(Build_Shadow_Entity): This routine is now a procedure. Add
	formal parameter Shadow. Update the comment on usage. Add
	context-specific decoration for states and variables.
	(Decorate_State): New routine.	(Decorate_Variable): New routine.
	(Find_And_Process_States): New routine.
	(Process_Declarations): Renamed to Process_Declarations_And_States.
	(Process_Declarations_And_States): Add formal parameters
	Pack and Create_Abstract_Views. Update the comment on usage.
	(Process_States): New routine.
	* sem_prag.adb (Check_Dependency_Clause): Handle abstract
	views of states and variables. Match the abstract view of a state
	against its corresponding non-abstract view.
	(Is_Matching_Input):
	Handle abstract views of states and variables. Match the abstract
	view of a state against its corresponding non-abstract view.
	(Process_Global_Item): Handle abstract views of states and
	variables.

2014-01-20  Bob Duff  <duff@adacore.com>

	* sem_ch10.adb (Expand_With_Clause): Don't
	recurse on the prefix if the current with-ed name refers to a
	package that renames its own parent, eg "package P.Q renames P;".

2014-01-20  Yannick Moy  <moy@adacore.com>

	* exp_spark.adb (Expand_SPARK_Call): Remove procedure.
	* opt.adb, opt.ads (Full_Expander_Active): Remove function.
	* checks.adb, exp_ch6.adb, exp_ch9.adb, exp_disp.adb, sem_aggr.adb,
	* sem_ch10.adb, sem_ch5.adb, sem_ch6.adb, sem_ch8.adb, sem_ch9.adb,
	* sem_disp.adb, sem_res.adb Replace Full_Expander_Active by
	Expander_Active.

2014-01-20  Yannick Moy  <moy@adacore.com>

	* sinfo.ads Update documentation of GNATprove mode.

2014-01-20  Yannick Moy  <moy@adacore.com>

	* adabkend.adb, ali-util.adb, errout.adb, exp_ch7.adb,
	* exp_dbug.adb, freeze.adb, lib-xref.adb, restrict.adb,
	* sem_attr.adb, sem_ch4.adb, sem_ch5.adb, sem_ch6.adb, sem_ch8.adb,
	* sem_prag.adb, sem_res.adb, sem_util.adb Rename SPARK_Mode into
	GNATprove_Mode.
	* sem_ch13.adb: Remove blank.
	* exp_spark.adb, exp_spark.ads (Expand_SPARK_Call): Only replace
	subprograms by alias for renamings, not for inherited primitive
	operations.
	* exp_util.adb (Expand_Subtype_From_Expr): Apply the expansion
	in GNATprove mode.
	(Remove_Side_Effects): Apply the removal in
	GNATprove mode, for the full analysis of expressions.
	* expander.adb (Expand): Call the light SPARK expansion in GNATprove
	mode.
	(Expander_Mode_Restore, Expander_Mode_Save_And_Set): Ignore
	save/restore actions for Expander_Active flag in GNATprove mode,
	similar to what is done in ASIS mode.
	* frontend.adb (Frontend): Generic bodies are instantiated in
	GNATprove mode.
	* gnat1drv.adb (Adjust_Global_Switches): Set operating
	mode to Check_Semantics in GNATprove mode, although a light
	expansion is still performed.
	(Gnat1drv): Set Back_End_Mode to
	Declarations_Only in GNATprove mode, and later on special case
	the GNATprove mode to continue analysis anyway.
	* lib-writ.adb (Write_ALI): Always generate ALI files in
	GNATprove mode.
	* opt.adb, opt.ads (Full_Expander_Active): Make it equivalent to
	Expander_Active.
	(SPARK_Mode): Renamed as GNATprove_Mode.
	* sem_aggr.adb (Aggregate_Constraint_Checks): Add checks in the
	tree in GNATprove_Mode.
	* sem_ch12.adb (Analyze_Package_Instantiation): Always instantiate
	body in GNATprove mode.
	(Need_Subprogram_Instance_Body): Always instantiate body in GNATprove
	mode.
	* sem_ch3.adb (Constrain_Index, Process_Range_Expr_In_Decl):
	Make sure side effects are removed in GNATprove mode.

2014-01-20  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <object>: Robustify tests
	for aliased objects with an unconstrained nominal subtype.
	* gcc-interface/trans.c (Call_to_gnu): Likewise.
	(gnat_to_gnu) <case N_Op_Not>: Robustify test for private type.
	<case N_Op_Minus>: Remove useless code.
	(Exception_Handler_to_gnu_zcx): Minor tweaks.

2014-01-20  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <case E_Record_Subtype>:
	Tidy up.  For a subtype with discriminants and variant part, if a
	variant is statically selected and the fields all have a constant
	position, put them in order of increasing position.  Likewise if
	no variant part but representation clause is present.
	* gcc-interface/utils.c (make_packable_type): Robustify.
	(maybe_pad_type): Use local variable and tidy up condition.  If no
	alignment is specified, use the original one.
	(create_type_stub_decl): Minor tweak.
	(convert) <case VECTOR_CST>: Fix typo.
	<case CONSTRUCTOR>: Deal with padding types around the same type.
	Do not punt on missing fields.
	(unchecked_convert): Call finish_record_type to lay out the special
	record types made for conversions from/to problematic integer types.
	Bump the alignment of CONSTRUCTORs before converting them to a more
	aligned type.

2014-01-20  Eric Botcazou  <ebotcazou@adacore.com>

	* gcc-interface/decl.c (gnat_to_gnu_entity) <case E_Component>: Remove
	obsolete code for type_annotate_only mode, simplify code and slightly
	improve wording of comments.

2014-01-12  Eric Botcazou  <ebotcazou@adacore.com>

	PR ada/59772
	* gcc-interface/cuintp.c (build_cst_from_int): Use 32-bit integer type
	as intermediate type.
	(UI_To_gnu): Likewise.

2014-01-03  Eric Botcazou  <ebotcazou@adacore.com>

	* gnatvsn.ads (Current_Year): Bump to 2014.

2014-01-02  Tobias Burnus  <burnus@net-b.de>

	* gnat_ugn.texi: Bump @copying's copyright year.

Copyright (C) 2014 Free Software Foundation, Inc.

Copying and distribution of this file, with or without modification,
are permitted in any medium without royalty provided the copyright
notice and this notice are preserved.