| /* { dg-do compile } */ |
| /* { dg-options "-Os -fdump-tree-optimized" } */ |
| /* |
| * License: GPL |
| * Copyright: (c) 2007 by Till Harbaum <till@harbaum.org> |
| * Copyright: (c) 2008 Wolfgang Moser, http://d81.de |
| */ |
| |
| /* #include <avr/wdt.h> */ |
| /* some declarations from the include above for ATMega8 */ |
| #define _SFR_IO8(io_addr) (*(volatile unsigned char *)((io_addr) + 0x20)) |
| #define TOV0 0 |
| #define TCNT0 _SFR_IO8(0x32) |
| #define TIFR _SFR_IO8(0x38) |
| #define DDRC _SFR_IO8(0x14) |
| #define DDRD _SFR_IO8(0x11) |
| #define PORTC _SFR_IO8(0x15) |
| #define PORTD _SFR_IO8(0x12) |
| |
| |
| static void delay_wait_us( unsigned char timeout ) { |
| __asm__ __volatile__ ("wdr"); |
| |
| TCNT0 = timeout; |
| TIFR |= (1 << (TOV0)); |
| |
| /* wait until counter overflows */ |
| while(!(TIFR & (1 << (TOV0)))); |
| } |
| |
| /* The original testcase was multiplying by 1000. Gcc is now smart enough |
| to work out that actual parameter is 5000 that is not what testcase was |
| about. Obstructate the code somewhat then. */ |
| int a; |
| static void delay_wait_us_ms( unsigned char timeout ) { |
| delay_wait_us( timeout * a ); |
| } |
| |
| |
| void makeUseOfTimerWait( unsigned char val ) { |
| delay_wait_us( 10 ); |
| DDRC |= 0x10; |
| delay_wait_us( 10 ); |
| DDRD |= 0x20; |
| |
| delay_wait_us( 20 ); |
| PORTC &= ~0x10; |
| delay_wait_us( 10 ); |
| PORTD &= ~0x20; |
| |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| delay_wait_us_ms( 5 ); |
| |
| PORTC |= val & 0x10; |
| delay_wait_us( 10 ); |
| PORTD |= val & 0x20; |
| |
| delay_wait_us( 10 ); |
| } |
| /* We should not inline the delay loops. */ |
| /* { dg-final { scan-tree-dump "delay_wait_us" "optimized"} } */ |
| /* { dg-final { scan-tree-dump "delay_wait_us_ms" "optimized"} } */ |