LoongArch: Add prefetch instructions.
Enable sw prefetching at -O3 and higher.
Co-Authored-By: xujiahao <xujiahao@loongson.cn>
gcc/ChangeLog:
* config/loongarch/constraints.md (ZD): New constraint.
* config/loongarch/loongarch-def.c: Initial number of parallel prefetch.
* config/loongarch/loongarch-tune.h (struct loongarch_cache):
Define number of parallel prefetch.
* config/loongarch/loongarch.cc (loongarch_option_override_internal):
Set up parameters to be used in prefetching algorithm.
* config/loongarch/loongarch.md (prefetch): New template.
diff --git a/gcc/config/loongarch/constraints.md b/gcc/config/loongarch/constraints.md
index 43cb7b5..46f7f63 100644
--- a/gcc/config/loongarch/constraints.md
+++ b/gcc/config/loongarch/constraints.md
@@ -86,6 +86,10 @@
;; "ZB"
;; "An address that is held in a general-purpose register.
;; The offset is zero"
+;; "ZD"
+;; "An address operand whose address is formed by a base register
+;; and offset that is suitable for use in instructions with the same
+;; addressing mode as @code{preld}."
;; "<" "Matches a pre-dec or post-dec operand." (Global non-architectural)
;; ">" "Matches a pre-inc or post-inc operand." (Global non-architectural)
@@ -190,3 +194,9 @@
The offset is zero"
(and (match_code "mem")
(match_test "REG_P (XEXP (op, 0))")))
+
+(define_address_constraint "ZD"
+ "An address operand whose address is formed by a base register
+ and offset that is suitable for use in instructions with the same
+ addressing mode as @code{preld}."
+ (match_test "loongarch_12bit_offset_address_p (op, mode)"))
diff --git a/gcc/config/loongarch/loongarch-def.c b/gcc/config/loongarch/loongarch-def.c
index cbf995d..80ab10a 100644
--- a/gcc/config/loongarch/loongarch-def.c
+++ b/gcc/config/loongarch/loongarch-def.c
@@ -62,11 +62,13 @@
.l1d_line_size = 64,
.l1d_size = 64,
.l2d_size = 256,
+ .simultaneous_prefetches = 4,
},
[CPU_LA464] = {
.l1d_line_size = 64,
.l1d_size = 64,
.l2d_size = 256,
+ .simultaneous_prefetches = 4,
},
};
diff --git a/gcc/config/loongarch/loongarch-tune.h b/gcc/config/loongarch/loongarch-tune.h
index 6f3530f..8e3eb29 100644
--- a/gcc/config/loongarch/loongarch-tune.h
+++ b/gcc/config/loongarch/loongarch-tune.h
@@ -45,6 +45,7 @@
int l1d_line_size; /* bytes */
int l1d_size; /* KiB */
int l2d_size; /* kiB */
+ int simultaneous_prefetches; /* number of parallel prefetch */
};
#endif /* LOONGARCH_TUNE_H */
diff --git a/gcc/config/loongarch/loongarch.cc b/gcc/config/loongarch/loongarch.cc
index 8d5d8d9..8ee32c9 100644
--- a/gcc/config/loongarch/loongarch.cc
+++ b/gcc/config/loongarch/loongarch.cc
@@ -63,6 +63,7 @@
#include "context.h"
#include "builtins.h"
#include "rtl-iter.h"
+#include "opts.h"
/* This file should be included last. */
#include "target-def.h"
@@ -6100,6 +6101,33 @@
if (loongarch_branch_cost == 0)
loongarch_branch_cost = loongarch_cost->branch_cost;
+ /* Set up parameters to be used in prefetching algorithm. */
+ int simultaneous_prefetches
+ = loongarch_cpu_cache[LARCH_ACTUAL_TUNE].simultaneous_prefetches;
+
+ SET_OPTION_IF_UNSET (opts, &global_options_set,
+ param_simultaneous_prefetches,
+ simultaneous_prefetches);
+
+ SET_OPTION_IF_UNSET (opts, &global_options_set,
+ param_l1_cache_line_size,
+ loongarch_cpu_cache[LARCH_ACTUAL_TUNE].l1d_line_size);
+
+ SET_OPTION_IF_UNSET (opts, &global_options_set,
+ param_l1_cache_size,
+ loongarch_cpu_cache[LARCH_ACTUAL_TUNE].l1d_size);
+
+ SET_OPTION_IF_UNSET (opts, &global_options_set,
+ param_l2_cache_size,
+ loongarch_cpu_cache[LARCH_ACTUAL_TUNE].l2d_size);
+
+
+ /* Enable sw prefetching at -O3 and higher. */
+ if (opts->x_flag_prefetch_loop_arrays < 0
+ && (opts->x_optimize >= 3 || opts->x_flag_profile_use)
+ && !opts->x_optimize_size)
+ opts->x_flag_prefetch_loop_arrays = 1;
+
if (TARGET_DIRECT_EXTERN_ACCESS && flag_shlib)
error ("%qs cannot be used for compiling a shared library",
"-mdirect-extern-access");
diff --git a/gcc/config/loongarch/loongarch.md b/gcc/config/loongarch/loongarch.md
index 682ab96..2fda538 100644
--- a/gcc/config/loongarch/loongarch.md
+++ b/gcc/config/loongarch/loongarch.md
@@ -3282,6 +3282,20 @@
;; ....................
;;
+(define_insn "prefetch"
+ [(prefetch (match_operand 0 "address_operand" "ZD")
+ (match_operand 1 "const_int_operand" "n")
+ (match_operand 2 "const_int_operand" "n"))]
+ ""
+{
+ switch (INTVAL (operands[1]))
+ {
+ case 0: return "preld\t0,%a0";
+ case 1: return "preld\t8,%a0";
+ default: gcc_unreachable ();
+ }
+})
+
(define_insn "nop"
[(const_int 0)]
""
