/* Machine description for AArch64 architecture.
   Copyright (C) 2009-2019 Free Software Foundation, Inc.
   Contributed by ARM Ltd.

   This file is part of GCC.

   GCC is free software; you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published by
   the Free Software Foundation; either version 3, or (at your option)
   any later version.

   GCC is distributed in the hope that it will be useful, but
   WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with GCC; see the file COPYING3.  If not see
   <http://www.gnu.org/licenses/>.  */

/* Important note about Carry generation in AArch64.

   Unlike some architectures, the C flag generated by a subtract
   operation, or a simple compare operation is set to 1 if the result
   does not overflow in an unsigned sense.  That is, if there is no
   borrow needed from a higher word.  That means that overflow from
   addition will set C, but overflow from a subtraction will clear C.
   We use CC_Cmode to represent detection of overflow from addition as
   CCmode is used for 'normal' compare (subtraction) operations.  For
   ADC, the representation becomes more complex still, since we cannot
   use the normal idiom of comparing the result to one of the input
   operands; instead we use CC_ADCmode to represent this case.  */
CC_MODE (CCFP);
CC_MODE (CCFPE);
CC_MODE (CC_SWP);
CC_MODE (CC_NZ);    /* Only N and Z bits of condition flags are valid.  */
CC_MODE (CC_Z);     /* Only Z bit of condition flags is valid.  */
CC_MODE (CC_C);     /* C represents unsigned overflow of a simple addition.  */
CC_MODE (CC_ADC);   /* Unsigned overflow from an ADC (add with carry).  */
CC_MODE (CC_V);     /* Only V bit of condition flags is valid.  */

/* Half-precision floating point for __fp16.  */
FLOAT_MODE (HF, 2, 0);
ADJUST_FLOAT_FORMAT (HF, &ieee_half_format);

/* Vector modes.  */

VECTOR_BOOL_MODE (VNx16BI, 16, 2);
VECTOR_BOOL_MODE (VNx8BI, 8, 2);
VECTOR_BOOL_MODE (VNx4BI, 4, 2);
VECTOR_BOOL_MODE (VNx2BI, 2, 2);

ADJUST_NUNITS (VNx16BI, aarch64_sve_vg * 8);
ADJUST_NUNITS (VNx8BI, aarch64_sve_vg * 4);
ADJUST_NUNITS (VNx4BI, aarch64_sve_vg * 2);
ADJUST_NUNITS (VNx2BI, aarch64_sve_vg);

ADJUST_ALIGNMENT (VNx16BI, 2);
ADJUST_ALIGNMENT (VNx8BI, 2);
ADJUST_ALIGNMENT (VNx4BI, 2);
ADJUST_ALIGNMENT (VNx2BI, 2);

VECTOR_MODES (INT, 8);        /*       V8QI V4HI V2SI.  */
VECTOR_MODES (INT, 16);       /* V16QI V8HI V4SI V2DI.  */
VECTOR_MODES (FLOAT, 8);      /*                 V2SF.  */
VECTOR_MODES (FLOAT, 16);     /*            V4SF V2DF.  */
VECTOR_MODE (FLOAT, DF, 1);   /*                 V1DF.  */
VECTOR_MODE (FLOAT, HF, 2);   /*                 V2HF.  */

/* Oct Int: 256-bit integer mode needed for 32-byte vector arguments.  */
INT_MODE (OI, 32);

/* Opaque integer modes for 3 or 4 Neon q-registers / 6 or 8 Neon d-registers
   (2 d-regs = 1 q-reg = TImode).  */
INT_MODE (CI, 48);
INT_MODE (XI, 64);

/* Define SVE modes for NVECS vectors.  VB, VH, VS and VD are the prefixes
   for 8-bit, 16-bit, 32-bit and 64-bit elements respectively.  It isn't
   strictly necessary to set the alignment here, since the default would
   be clamped to BIGGEST_ALIGNMENT anyhow, but it seems clearer.  */
#define SVE_MODES(NVECS, VB, VH, VS, VD) \
  VECTOR_MODES_WITH_PREFIX (VNx, INT, 16 * NVECS); \
  VECTOR_MODES_WITH_PREFIX (VNx, FLOAT, 16 * NVECS); \
  \
  ADJUST_NUNITS (VB##QI, aarch64_sve_vg * NVECS * 8); \
  ADJUST_NUNITS (VH##HI, aarch64_sve_vg * NVECS * 4); \
  ADJUST_NUNITS (VS##SI, aarch64_sve_vg * NVECS * 2); \
  ADJUST_NUNITS (VD##DI, aarch64_sve_vg * NVECS); \
  ADJUST_NUNITS (VH##HF, aarch64_sve_vg * NVECS * 4); \
  ADJUST_NUNITS (VS##SF, aarch64_sve_vg * NVECS * 2); \
  ADJUST_NUNITS (VD##DF, aarch64_sve_vg * NVECS); \
  \
  ADJUST_ALIGNMENT (VB##QI, 16); \
  ADJUST_ALIGNMENT (VH##HI, 16); \
  ADJUST_ALIGNMENT (VS##SI, 16); \
  ADJUST_ALIGNMENT (VD##DI, 16); \
  ADJUST_ALIGNMENT (VH##HF, 16); \
  ADJUST_ALIGNMENT (VS##SF, 16); \
  ADJUST_ALIGNMENT (VD##DF, 16);

/* Give SVE vectors the names normally used for 256-bit vectors.
   The actual number depends on command-line flags.  */
SVE_MODES (1, VNx16, VNx8, VNx4, VNx2)
SVE_MODES (2, VNx32, VNx16, VNx8, VNx4)
SVE_MODES (3, VNx48, VNx24, VNx12, VNx6)
SVE_MODES (4, VNx64, VNx32, VNx16, VNx8)

/* Quad float: 128-bit floating mode for long doubles.  */
FLOAT_MODE (TF, 16, ieee_quad_format);

/* A 4-tuple of SVE vectors with the maximum -msve-vector-bits= setting.
   Note that this is a limit only on the compile-time sizes of modes;
   it is not a limit on the runtime sizes, since VL-agnostic code
   must work with arbitary vector lengths.  */
#define MAX_BITSIZE_MODE_ANY_MODE (2048 * 4)

/* Coefficient 1 is multiplied by the number of 128-bit chunks in an
   SVE vector (referred to as "VQ") minus one.  */
#define NUM_POLY_INT_COEFFS 2