Google Git
Sign in
gnu / gcc / 57ea00136418991e847e46a6946a81a1df70c9a4 / . / gcc / simplify-rtx.c
blob: 36dd9a17335650ab3f67ba66fe3913bccc37b0e1 [file] [log] [blame]
/* RTL simplification functions for GNU compiler.
Copyright (C) 1987, 1988, 1989, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
1999, 2000, 2001, 2002, 2003, 2004 Free Software Foundation, Inc.
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING. If not, write to the Free
Software Foundation, 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA. */
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "rtl.h"
#include "tree.h"
#include "tm_p.h"
#include "regs.h"
#include "hard-reg-set.h"
#include "flags.h"
#include "real.h"
#include "insn-config.h"
#include "recog.h"
#include "function.h"
#include "expr.h"
#include "toplev.h"
#include "output.h"
#include "ggc.h"
#include "target.h"
/* Simplification and canonicalization of RTL. */
/* Much code operates on (low, high) pairs; the low value is an
unsigned wide int, the high value a signed wide int. We
occasionally need to sign extend from low to high as if low were a
signed wide int. */
#define HWI_SIGN_EXTEND(low) \
((((HOST_WIDE_INT) low) < 0) ? ((HOST_WIDE_INT) -1) : ((HOST_WIDE_INT) 0))
static rtx neg_const_int (enum machine_mode, rtx);
static int simplify_plus_minus_op_data_cmp (const void *, const void *);
static rtx simplify_plus_minus (enum rtx_code, enum machine_mode, rtx,
rtx, int);
static rtx simplify_immed_subreg (enum machine_mode, rtx, enum machine_mode,
unsigned int);
static bool associative_constant_p (rtx);
static rtx simplify_associative_operation (enum rtx_code, enum machine_mode,
rtx, rtx);
/* Negate a CONST_INT rtx, truncating (because a conversion from a
maximally negative number can overflow). */
static rtx
neg_const_int (enum machine_mode mode, rtx i)
{
return gen_int_mode (- INTVAL (i), mode);
}
/* Make a binary operation by properly ordering the operands and
seeing if the expression folds. */
rtx
simplify_gen_binary (enum rtx_code code, enum machine_mode mode, rtx op0,
rtx op1)
{
rtx tem;
/* Put complex operands first and constants second if commutative. */
if (GET_RTX_CLASS (code) == 'c'
&& swap_commutative_operands_p (op0, op1))
tem = op0, op0 = op1, op1 = tem;
/* If this simplifies, do it. */
tem = simplify_binary_operation (code, mode, op0, op1);
if (tem)
return tem;
/* Handle addition and subtraction specially. Otherwise, just form
the operation. */
if (code == PLUS || code == MINUS)
{
tem = simplify_plus_minus (code, mode, op0, op1, 1);
if (tem)
return tem;
}
return gen_rtx_fmt_ee (code, mode, op0, op1);
}
/* If X is a MEM referencing the constant pool, return the real value.
Otherwise return X. */
rtx
avoid_constant_pool_reference (rtx x)
{
rtx c, tmp, addr;
enum machine_mode cmode;
switch (GET_CODE (x))
{
case MEM:
break;
case FLOAT_EXTEND:
/* Handle float extensions of constant pool references. */
tmp = XEXP (x, 0);
c = avoid_constant_pool_reference (tmp);
if (c != tmp && GET_CODE (c) == CONST_DOUBLE)
{
REAL_VALUE_TYPE d;
REAL_VALUE_FROM_CONST_DOUBLE (d, c);
return CONST_DOUBLE_FROM_REAL_VALUE (d, GET_MODE (x));
}
return x;
default:
return x;
}
addr = XEXP (x, 0);
/* Call target hook to avoid the effects of -fpic etc.... */
addr = (*targetm.delegitimize_address) (addr);
if (GET_CODE (addr) == LO_SUM)
addr = XEXP (addr, 1);
if (GET_CODE (addr) != SYMBOL_REF
|| ! CONSTANT_POOL_ADDRESS_P (addr))
return x;
c = get_pool_constant (addr);
cmode = get_pool_mode (addr);
/* If we're accessing the constant in a different mode than it was
originally stored, attempt to fix that up via subreg simplifications.
If that fails we have no choice but to return the original memory. */
if (cmode != GET_MODE (x))
{
c = simplify_subreg (GET_MODE (x), c, cmode, 0);
return c ? c : x;
}
return c;
}
/* Make a unary operation by first seeing if it folds and otherwise making
the specified operation. */
rtx
simplify_gen_unary (enum rtx_code code, enum machine_mode mode, rtx op,
enum machine_mode op_mode)
{
rtx tem;
/* If this simplifies, use it. */
if ((tem = simplify_unary_operation (code, mode, op, op_mode)) != 0)
return tem;
return gen_rtx_fmt_e (code, mode, op);
}
/* Likewise for ternary operations. */
rtx
simplify_gen_ternary (enum rtx_code code, enum machine_mode mode,
enum machine_mode op0_mode, rtx op0, rtx op1, rtx op2)
{
rtx tem;
/* If this simplifies, use it. */
if (0 != (tem = simplify_ternary_operation (code, mode, op0_mode,
op0, op1, op2)))
return tem;
return gen_rtx_fmt_eee (code, mode, op0, op1, op2);
}
/* Likewise, for relational operations.
CMP_MODE specifies mode comparison is done in.
*/
rtx
simplify_gen_relational (enum rtx_code code, enum machine_mode mode,
enum machine_mode cmp_mode, rtx op0, rtx op1)
{
rtx tem;
if (cmp_mode == VOIDmode)
cmp_mode = GET_MODE (op0);
if (cmp_mode == VOIDmode)
cmp_mode = GET_MODE (op1);
if (cmp_mode != VOIDmode
&& ! VECTOR_MODE_P (mode))
{
tem = simplify_relational_operation (code, cmp_mode, op0, op1);
if (tem)
{
#ifdef FLOAT_STORE_FLAG_VALUE
if (GET_MODE_CLASS (mode) == MODE_FLOAT)
{
REAL_VALUE_TYPE val;
if (tem == const0_rtx)
return CONST0_RTX (mode);
if (tem != const_true_rtx)
abort ();
val = FLOAT_STORE_FLAG_VALUE (mode);
return CONST_DOUBLE_FROM_REAL_VALUE (val, mode);
}
#endif
return tem;
}
}
/* For the following tests, ensure const0_rtx is op1. */
if (swap_commutative_operands_p (op0, op1)
|| (op0 == const0_rtx && op1 != const0_rtx))
tem = op0, op0 = op1, op1 = tem, code = swap_condition (code);
/* If op0 is a compare, extract the comparison arguments from it. */
if (GET_CODE (op0) == COMPARE && op1 == const0_rtx)
return simplify_gen_relational (code, mode, VOIDmode,
XEXP (op0, 0), XEXP (op0, 1));
/* If op0 is a comparison, extract the comparison arguments form it. */
if (GET_RTX_CLASS (GET_CODE (op0)) == '<' && op1 == const0_rtx)
{
if (code == NE)
{
if (GET_MODE (op0) == mode)
return op0;
return simplify_gen_relational (GET_CODE (op0), mode, VOIDmode,
XEXP (op0, 0), XEXP (op0, 1));
}
else if (code == EQ)
{
enum rtx_code new = reversed_comparison_code (op0, NULL_RTX);
if (new != UNKNOWN)
return simplify_gen_relational (new, mode, VOIDmode,
XEXP (op0, 0), XEXP (op0, 1));
}
}
return gen_rtx_fmt_ee (code, mode, op0, op1);
}
/* Replace all occurrences of OLD in X with NEW and try to simplify the
resulting RTX. Return a new RTX which is as simplified as possible. */
rtx
simplify_replace_rtx (rtx x, rtx old, rtx new)
{
enum rtx_code code = GET_CODE (x);
enum machine_mode mode = GET_MODE (x);
enum machine_mode op_mode;
rtx op0, op1, op2;
/* If X is OLD, return NEW. Otherwise, if this is an expression, try
to build a new expression substituting recursively. If we can't do
anything, return our input. */
if (x == old)
return new;
switch (GET_RTX_CLASS (code))
{
case '1':
op0 = XEXP (x, 0);
op_mode = GET_MODE (op0);
op0 = simplify_replace_rtx (op0, old, new);
if (op0 == XEXP (x, 0))
return x;
return simplify_gen_unary (code, mode, op0, op_mode);
case '2':
case 'c':
op0 = simplify_replace_rtx (XEXP (x, 0), old, new);
op1 = simplify_replace_rtx (XEXP (x, 1), old, new);
if (op0 == XEXP (x, 0) && op1 == XEXP (x, 1))
return x;
return simplify_gen_binary (code, mode, op0, op1);
case '<':
op0 = XEXP (x, 0);
op1 = XEXP (x, 1);
op_mode = GET_MODE (op0) != VOIDmode ? GET_MODE (op0) : GET_MODE (op1);
op0 = simplify_replace_rtx (op0, old, new);
op1 = simplify_replace_rtx (op1, old, new);
if (op0 == XEXP (x, 0) && op1 == XEXP (x, 1))
return x;
return simplify_gen_relational (code, mode, op_mode, op0, op1);
case '3':
case 'b':
op0 = XEXP (x, 0);
op_mode = GET_MODE (op0);
op0 = simplify_replace_rtx (op0, old, new);
op1 = simplify_replace_rtx (XEXP (x, 1), old, new);
op2 = simplify_replace_rtx (XEXP (x, 2), old, new);
if (op0 == XEXP (x, 0) && op1 == XEXP (x, 1) && op2 == XEXP (x, 2))
return x;
if (op_mode == VOIDmode)
op_mode = GET_MODE (op0);
return simplify_gen_ternary (code, mode, op_mode, op0, op1, op2);
case 'x':
/* The only case we try to handle is a SUBREG. */
if (code == SUBREG)
{
op0 = simplify_replace_rtx (SUBREG_REG (x), old, new);
if (op0 == SUBREG_REG (x))
return x;
op0 = simplify_gen_subreg (GET_MODE (x), op0,
GET_MODE (SUBREG_REG (x)),
SUBREG_BYTE (x));
return op0 ? op0 : x;
}
break;
case 'o':
if (code == MEM)
{
op0 = simplify_replace_rtx (XEXP (x, 0), old, new);
if (op0 == XEXP (x, 0))
return x;
return replace_equiv_address_nv (x, op0);
}
else if (code == LO_SUM)
{
op0 = simplify_replace_rtx (XEXP (x, 0), old, new);
op1 = simplify_replace_rtx (XEXP (x, 1), old, new);
/* (lo_sum (high x) x) -> x */
if (GET_CODE (op0) == HIGH && rtx_equal_p (XEXP (op0, 0), op1))
return op1;
if (op0 == XEXP (x, 0) && op1 == XEXP (x, 1))
return x;
return gen_rtx_LO_SUM (mode, op0, op1);
}
else if (code == REG)
{
if (REG_P (old) && REGNO (x) == REGNO (old))
return new;
}
break;
default:
break;
}
return x;
}
/* Try to simplify a unary operation CODE whose output mode is to be
MODE with input operand OP whose mode was originally OP_MODE.
Return zero if no simplification can be made. */
rtx
simplify_unary_operation (enum rtx_code code, enum machine_mode mode,
rtx op, enum machine_mode op_mode)
{
unsigned int width = GET_MODE_BITSIZE (mode);
rtx trueop = avoid_constant_pool_reference (op);
if (code == VEC_DUPLICATE)
{
if (!VECTOR_MODE_P (mode))
abort ();
if (GET_MODE (trueop) != VOIDmode
&& !VECTOR_MODE_P (GET_MODE (trueop))
&& GET_MODE_INNER (mode) != GET_MODE (trueop))
abort ();
if (GET_MODE (trueop) != VOIDmode
&& VECTOR_MODE_P (GET_MODE (trueop))
&& GET_MODE_INNER (mode) != GET_MODE_INNER (GET_MODE (trueop)))
abort ();
if (GET_CODE (trueop) == CONST_INT || GET_CODE (trueop) == CONST_DOUBLE
|| GET_CODE (trueop) == CONST_VECTOR)
{
int elt_size = GET_MODE_SIZE (GET_MODE_INNER (mode));
unsigned n_elts = (GET_MODE_SIZE (mode) / elt_size);
rtvec v = rtvec_alloc (n_elts);
unsigned int i;
if (GET_CODE (trueop) != CONST_VECTOR)
for (i = 0; i < n_elts; i++)
RTVEC_ELT (v, i) = trueop;
else
{
enum machine_mode inmode = GET_MODE (trueop);
int in_elt_size = GET_MODE_SIZE (GET_MODE_INNER (inmode));
unsigned in_n_elts = (GET_MODE_SIZE (inmode) / in_elt_size);
if (in_n_elts >= n_elts || n_elts % in_n_elts)
abort ();
for (i = 0; i < n_elts; i++)
RTVEC_ELT (v, i) = CONST_VECTOR_ELT (trueop, i % in_n_elts);
}
return gen_rtx_CONST_VECTOR (mode, v);
}
}
else if (GET_CODE (op) == CONST)
return simplify_unary_operation (code, mode, XEXP (op, 0), op_mode);
if (VECTOR_MODE_P (mode) && GET_CODE (trueop) == CONST_VECTOR)
{
int elt_size = GET_MODE_SIZE (GET_MODE_INNER (mode));
unsigned n_elts = (GET_MODE_SIZE (mode) / elt_size);
enum machine_mode opmode = GET_MODE (trueop);
int op_elt_size = GET_MODE_SIZE (GET_MODE_INNER (opmode));
unsigned op_n_elts = (GET_MODE_SIZE (opmode) / op_elt_size);
rtvec v = rtvec_alloc (n_elts);
unsigned int i;
if (op_n_elts != n_elts)
abort ();
for (i = 0; i < n_elts; i++)
{
rtx x = simplify_unary_operation (code, GET_MODE_INNER (mode),
CONST_VECTOR_ELT (trueop, i),
GET_MODE_INNER (opmode));
if (!x)
return 0;
RTVEC_ELT (v, i) = x;
}
return gen_rtx_CONST_VECTOR (mode, v);
}
/* The order of these tests is critical so that, for example, we don't
check the wrong mode (input vs. output) for a conversion operation,
such as FIX. At some point, this should be simplified. */
if (code == FLOAT && GET_MODE (trueop) == VOIDmode
&& (GET_CODE (trueop) == CONST_DOUBLE || GET_CODE (trueop) == CONST_INT))
{
HOST_WIDE_INT hv, lv;
REAL_VALUE_TYPE d;
if (GET_CODE (trueop) == CONST_INT)
lv = INTVAL (trueop), hv = HWI_SIGN_EXTEND (lv);
else
lv = CONST_DOUBLE_LOW (trueop), hv = CONST_DOUBLE_HIGH (trueop);
REAL_VALUE_FROM_INT (d, lv, hv, mode);
d = real_value_truncate (mode, d);
return CONST_DOUBLE_FROM_REAL_VALUE (d, mode);
}
else if (code == UNSIGNED_FLOAT && GET_MODE (trueop) == VOIDmode
&& (GET_CODE (trueop) == CONST_DOUBLE
|| GET_CODE (trueop) == CONST_INT))
{
HOST_WIDE_INT hv, lv;
REAL_VALUE_TYPE d;
if (GET_CODE (trueop) == CONST_INT)
lv = INTVAL (trueop), hv = HWI_SIGN_EXTEND (lv);
else
lv = CONST_DOUBLE_LOW (trueop), hv = CONST_DOUBLE_HIGH (trueop);
if (op_mode == VOIDmode)
{
/* We don't know how to interpret negative-looking numbers in
this case, so don't try to fold those. */
if (hv < 0)
return 0;
}
else if (GET_MODE_BITSIZE (op_mode) >= HOST_BITS_PER_WIDE_INT * 2)
;
else
hv = 0, lv &= GET_MODE_MASK (op_mode);
REAL_VALUE_FROM_UNSIGNED_INT (d, lv, hv, mode);
d = real_value_truncate (mode, d);
return CONST_DOUBLE_FROM_REAL_VALUE (d, mode);
}
if (GET_CODE (trueop) == CONST_INT
&& width <= HOST_BITS_PER_WIDE_INT && width > 0)
{
HOST_WIDE_INT arg0 = INTVAL (trueop);
HOST_WIDE_INT val;
switch (code)
{
case NOT:
val = ~ arg0;
break;
case NEG:
val = - arg0;
break;
case ABS:
val = (arg0 >= 0 ? arg0 : - arg0);
break;
case FFS:
/* Don't use ffs here. Instead, get low order bit and then its
number. If arg0 is zero, this will return 0, as desired. */
arg0 &= GET_MODE_MASK (mode);
val = exact_log2 (arg0 & (- arg0)) + 1;
break;
case CLZ:
arg0 &= GET_MODE_MASK (mode);
if (arg0 == 0 && CLZ_DEFINED_VALUE_AT_ZERO (mode, val))
;
else
val = GET_MODE_BITSIZE (mode) - floor_log2 (arg0) - 1;
break;
case CTZ:
arg0 &= GET_MODE_MASK (mode);
if (arg0 == 0)
{
/* Even if the value at zero is undefined, we have to come
up with some replacement. Seems good enough. */
if (! CTZ_DEFINED_VALUE_AT_ZERO (mode, val))
val = GET_MODE_BITSIZE (mode);
}
else
val = exact_log2 (arg0 & -arg0);
break;
case POPCOUNT:
arg0 &= GET_MODE_MASK (mode);
val = 0;
while (arg0)
val++, arg0 &= arg0 - 1;
break;
case PARITY:
arg0 &= GET_MODE_MASK (mode);
val = 0;
while (arg0)
val++, arg0 &= arg0 - 1;
val &= 1;
break;
case TRUNCATE:
val = arg0;
break;
case ZERO_EXTEND:
/* When zero-extending a CONST_INT, we need to know its
original mode. */
if (op_mode == VOIDmode)
abort ();
if (GET_MODE_BITSIZE (op_mode) == HOST_BITS_PER_WIDE_INT)
{
/* If we were really extending the mode,
we would have to distinguish between zero-extension
and sign-extension. */
if (width != GET_MODE_BITSIZE (op_mode))
abort ();
val = arg0;
}
else if (GET_MODE_BITSIZE (op_mode) < HOST_BITS_PER_WIDE_INT)
val = arg0 & ~((HOST_WIDE_INT) (-1) << GET_MODE_BITSIZE (op_mode));
else
return 0;
break;
case SIGN_EXTEND:
if (op_mode == VOIDmode)
op_mode = mode;
if (GET_MODE_BITSIZE (op_mode) == HOST_BITS_PER_WIDE_INT)
{
/* If we were really extending the mode,
we would have to distinguish between zero-extension
and sign-extension. */
if (width != GET_MODE_BITSIZE (op_mode))
abort ();
val = arg0;
}
else if (GET_MODE_BITSIZE (op_mode) < HOST_BITS_PER_WIDE_INT)
{
val
= arg0 & ~((HOST_WIDE_INT) (-1) << GET_MODE_BITSIZE (op_mode));
if (val
& ((HOST_WIDE_INT) 1 << (GET_MODE_BITSIZE (op_mode) - 1)))
val -= (HOST_WIDE_INT) 1 << GET_MODE_BITSIZE (op_mode);
}
else
return 0;
break;
case SQRT:
case FLOAT_EXTEND:
case FLOAT_TRUNCATE:
case SS_TRUNCATE:
case US_TRUNCATE:
return 0;
default:
abort ();
}
val = trunc_int_for_mode (val, mode);
return GEN_INT (val);
}
/* We can do some operations on integer CONST_DOUBLEs. Also allow
for a DImode operation on a CONST_INT. */
else if (GET_MODE (trueop) == VOIDmode
&& width <= HOST_BITS_PER_WIDE_INT * 2
&& (GET_CODE (trueop) == CONST_DOUBLE
|| GET_CODE (trueop) == CONST_INT))
{
unsigned HOST_WIDE_INT l1, lv;
HOST_WIDE_INT h1, hv;
if (GET_CODE (trueop) == CONST_DOUBLE)
l1 = CONST_DOUBLE_LOW (trueop), h1 = CONST_DOUBLE_HIGH (trueop);
else
l1 = INTVAL (trueop), h1 = HWI_SIGN_EXTEND (l1);
switch (code)
{
case NOT:
lv = ~ l1;
hv = ~ h1;
break;
case NEG:
neg_double (l1, h1, &lv, &hv);
break;
case ABS:
if (h1 < 0)
neg_double (l1, h1, &lv, &hv);
else
lv = l1, hv = h1;
break;
case FFS:
hv = 0;
if (l1 == 0)
{
if (h1 == 0)
lv = 0;
else
lv = HOST_BITS_PER_WIDE_INT + exact_log2 (h1 & -h1) + 1;
}
else
lv = exact_log2 (l1 & -l1) + 1;
break;
case CLZ:
hv = 0;
if (h1 != 0)
lv = GET_MODE_BITSIZE (mode) - floor_log2 (h1) - 1
- HOST_BITS_PER_WIDE_INT;
else if (l1 != 0)
lv = GET_MODE_BITSIZE (mode) - floor_log2 (l1) - 1;
else if (! CLZ_DEFINED_VALUE_AT_ZERO (mode, lv))
lv = GET_MODE_BITSIZE (mode);
break;
case CTZ:
hv = 0;
if (l1 != 0)
lv = exact_log2 (l1 & -l1);
else if (h1 != 0)
lv = HOST_BITS_PER_WIDE_INT + exact_log2 (h1 & -h1);
else if (! CTZ_DEFINED_VALUE_AT_ZERO (mode, lv))
lv = GET_MODE_BITSIZE (mode);
break;
case POPCOUNT:
hv = 0;
lv = 0;
while (l1)
lv++, l1 &= l1 - 1;
while (h1)
lv++, h1 &= h1 - 1;
break;
case PARITY:
hv = 0;
lv = 0;
while (l1)
lv++, l1 &= l1 - 1;
while (h1)
lv++, h1 &= h1 - 1;
lv &= 1;
break;
case TRUNCATE:
/* This is just a change-of-mode, so do nothing. */
lv = l1, hv = h1;
break;
case ZERO_EXTEND:
if (op_mode == VOIDmode)
abort ();
if (GET_MODE_BITSIZE (op_mode) > HOST_BITS_PER_WIDE_INT)
return 0;
hv = 0;
lv = l1 & GET_MODE_MASK (op_mode);
break;
case SIGN_EXTEND:
if (op_mode == VOIDmode
|| GET_MODE_BITSIZE (op_mode) > HOST_BITS_PER_WIDE_INT)
return 0;
else
{
lv = l1 & GET_MODE_MASK (op_mode);
if (GET_MODE_BITSIZE (op_mode) < HOST_BITS_PER_WIDE_INT
&& (lv & ((HOST_WIDE_INT) 1
<< (GET_MODE_BITSIZE (op_mode) - 1))) != 0)
lv -= (HOST_WIDE_INT) 1 << GET_MODE_BITSIZE (op_mode);
hv = HWI_SIGN_EXTEND (lv);
}
break;
case SQRT:
return 0;
default:
return 0;
}
return immed_double_const (lv, hv, mode);
}
else if (GET_CODE (trueop) == CONST_DOUBLE
&& GET_MODE_CLASS (mode) == MODE_FLOAT)
{
REAL_VALUE_TYPE d, t;
REAL_VALUE_FROM_CONST_DOUBLE (d, trueop);
switch (code)
{
case SQRT:
if (HONOR_SNANS (mode) && real_isnan (&d))
return 0;
real_sqrt (&t, mode, &d);
d = t;
break;
case ABS:
d = REAL_VALUE_ABS (d);
break;
case NEG:
d = REAL_VALUE_NEGATE (d);
break;
case FLOAT_TRUNCATE:
d = real_value_truncate (mode, d);
break;
case FLOAT_EXTEND:
/* All this does is change the mode. */
break;
case FIX:
real_arithmetic (&d, FIX_TRUNC_EXPR, &d, NULL);
break;
default:
abort ();
}
return CONST_DOUBLE_FROM_REAL_VALUE (d, mode);
}
else if (GET_CODE (trueop) == CONST_DOUBLE
&& GET_MODE_CLASS (GET_MODE (trueop)) == MODE_FLOAT
&& GET_MODE_CLASS (mode) == MODE_INT
&& width <= 2*HOST_BITS_PER_WIDE_INT && width > 0)
{
/* Although the overflow semantics of RTL's FIX and UNSIGNED_FIX
operators are intentionally left unspecified (to ease implementation
by target backends), for consistency, this routine implements the
same semantics for constant folding as used by the middle-end. */
HOST_WIDE_INT xh, xl, th, tl;
REAL_VALUE_TYPE x, t;
REAL_VALUE_FROM_CONST_DOUBLE (x, trueop);
switch (code)
{
case FIX:
if (REAL_VALUE_ISNAN (x))
return const0_rtx;
/* Test against the signed upper bound. */
if (width > HOST_BITS_PER_WIDE_INT)
{
th = ((unsigned HOST_WIDE_INT) 1
<< (width - HOST_BITS_PER_WIDE_INT - 1)) - 1;
tl = -1;
}
else
{
th = 0;
tl = ((unsigned HOST_WIDE_INT) 1 << (width - 1)) - 1;
}
real_from_integer (&t, VOIDmode, tl, th, 0);
if (REAL_VALUES_LESS (t, x))
{
xh = th;
xl = tl;
break;
}
/* Test against the signed lower bound. */
if (width > HOST_BITS_PER_WIDE_INT)
{
th = (HOST_WIDE_INT) -1 << (width - HOST_BITS_PER_WIDE_INT - 1);
tl = 0;
}
else
{
th = -1;
tl = (HOST_WIDE_INT) -1 << (width - 1);
}
real_from_integer (&t, VOIDmode, tl, th, 0);
if (REAL_VALUES_LESS (x, t))
{
xh = th;
xl = tl;
break;
}
REAL_VALUE_TO_INT (&xl, &xh, x);
break;
case UNSIGNED_FIX:
if (REAL_VALUE_ISNAN (x) || REAL_VALUE_NEGATIVE (x))
return const0_rtx;
/* Test against the unsigned upper bound. */
if (width == 2*HOST_BITS_PER_WIDE_INT)
{
th = -1;
tl = -1;
}
else if (width >= HOST_BITS_PER_WIDE_INT)
{
th = ((unsigned HOST_WIDE_INT) 1
<< (width - HOST_BITS_PER_WIDE_INT)) - 1;
tl = -1;
}
else
{
th = 0;
tl = ((unsigned HOST_WIDE_INT) 1 << width) - 1;
}
real_from_integer (&t, VOIDmode, tl, th, 1);
if (REAL_VALUES_LESS (t, x))
{
xh = th;
xl = tl;
break;
}
REAL_VALUE_TO_INT (&xl, &xh, x);
break;
default:
abort ();
}
return immed_double_const (xl, xh, mode);
}
/* This was formerly used only for non-IEEE float.
eggert@twinsun.com says it is safe for IEEE also. */
else
{
enum rtx_code reversed;
rtx temp;
/* There are some simplifications we can do even if the operands
aren't constant. */
switch (code)
{
case NOT:
/* (not (not X)) == X. */
if (GET_CODE (op) == NOT)
return XEXP (op, 0);
/* (not (eq X Y)) == (ne X Y), etc. */
if (GET_RTX_CLASS (GET_CODE (op)) == '<'
&& (mode == BImode || STORE_FLAG_VALUE == -1)
&& ((reversed = reversed_comparison_code (op, NULL_RTX))
!= UNKNOWN))
return simplify_gen_relational (reversed, mode, VOIDmode,
XEXP (op, 0), XEXP (op, 1));
/* (not (plus X -1)) can become (neg X). */
if (GET_CODE (op) == PLUS
&& XEXP (op, 1) == constm1_rtx)
return simplify_gen_unary (NEG, mode, XEXP (op, 0), mode);
/* Similarly, (not (neg X)) is (plus X -1). */
if (GET_CODE (op) == NEG)
return plus_constant (XEXP (op, 0), -1);
/* (not (xor X C)) for C constant is (xor X D) with D = ~C. */
if (GET_CODE (op) == XOR
&& GET_CODE (XEXP (op, 1)) == CONST_INT
&& (temp = simplify_unary_operation (NOT, mode,
XEXP (op, 1),
mode)) != 0)
return simplify_gen_binary (XOR, mode, XEXP (op, 0), temp);
/* (not (ashift 1 X)) is (rotate ~1 X). We used to do this for
operands other than 1, but that is not valid. We could do a
similar simplification for (not (lshiftrt C X)) where C is
just the sign bit, but this doesn't seem common enough to
bother with. */
if (GET_CODE (op) == ASHIFT
&& XEXP (op, 0) == const1_rtx)
{
temp = simplify_gen_unary (NOT, mode, const1_rtx, mode);
return simplify_gen_binary (ROTATE, mode, temp, XEXP (op, 1));
}
/* If STORE_FLAG_VALUE is -1, (not (comparison X Y)) can be done
by reversing the comparison code if valid. */
if (STORE_FLAG_VALUE == -1
&& GET_RTX_CLASS (GET_CODE (op)) == '<'
&& (reversed = reversed_comparison_code (op, NULL_RTX))
!= UNKNOWN)
return simplify_gen_relational (reversed, mode, VOIDmode,
XEXP (op, 0), XEXP (op, 1));
/* (not (ashiftrt foo C)) where C is the number of bits in FOO
minus 1 is (ge foo (const_int 0)) if STORE_FLAG_VALUE is -1,
so we can perform the above simplification. */
if (STORE_FLAG_VALUE == -1
&& GET_CODE (op) == ASHIFTRT
&& GET_CODE (XEXP (op, 1)) == CONST_INT
&& INTVAL (XEXP (op, 1)) == GET_MODE_BITSIZE (mode) - 1)
return simplify_gen_relational (GE, mode, VOIDmode,
XEXP (op, 0), const0_rtx);
break;
case NEG:
/* (neg (neg X)) == X. */
if (GET_CODE (op) == NEG)
return XEXP (op, 0);
/* (neg (plus X 1)) can become (not X). */
if (GET_CODE (op) == PLUS
&& XEXP (op, 1) == const1_rtx)
return simplify_gen_unary (NOT, mode, XEXP (op, 0), mode);
/* Similarly, (neg (not X)) is (plus X 1). */
if (GET_CODE (op) == NOT)
return plus_constant (XEXP (op, 0), 1);
/* (neg (minus X Y)) can become (minus Y X). This transformation
isn't safe for modes with signed zeros, since if X and Y are
both +0, (minus Y X) is the same as (minus X Y). If the
rounding mode is towards +infinity (or -infinity) then the two
expressions will be rounded differently. */
if (GET_CODE (op) == MINUS
&& !HONOR_SIGNED_ZEROS (mode)
&& !HONOR_SIGN_DEPENDENT_ROUNDING (mode))
return simplify_gen_binary (MINUS, mode, XEXP (op, 1),
XEXP (op, 0));
if (GET_CODE (op) == PLUS
&& !HONOR_SIGNED_ZEROS (mode)
&& !HONOR_SIGN_DEPENDENT_ROUNDING (mode))
{
/* (neg (plus A C)) is simplified to (minus -C A). */
if (GET_CODE (XEXP (op, 1)) == CONST_INT
|| GET_CODE (XEXP (op, 1)) == CONST_DOUBLE)
{
temp = simplify_unary_operation (NEG, mode, XEXP (op, 1),
mode);
if (temp)
return simplify_gen_binary (MINUS, mode, temp,
XEXP (op, 0));
}
/* (neg (plus A B)) is canonicalized to (minus (neg A) B). */
temp = simplify_gen_unary (NEG, mode, XEXP (op, 0), mode);
return simplify_gen_binary (MINUS, mode, temp, XEXP (op, 1));
}
/* (neg (mult A B)) becomes (mult (neg A) B).
This works even for floating-point values. */
if (GET_CODE (op) == MULT
&& !HONOR_SIGN_DEPENDENT_ROUNDING (mode))
{
temp = simplify_gen_unary (NEG, mode, XEXP (op, 0), mode);
return simplify_gen_binary (MULT, mode, temp, XEXP (op, 1));
}
/* NEG commutes with ASHIFT since it is multiplication. Only do
this if we can then eliminate the NEG (e.g., if the operand
is a constant). */
if (GET_CODE (op) == ASHIFT)
{
temp = simplify_unary_operation (NEG, mode, XEXP (op, 0),
mode);
if (temp)
return simplify_gen_binary (ASHIFT, mode, temp,
XEXP (op, 1));
}
break;
case SIGN_EXTEND:
/* (sign_extend (truncate (minus (label_ref L1) (label_ref L2))))
becomes just the MINUS if its mode is MODE. This allows
folding switch statements on machines using casesi (such as
the VAX). */
if (GET_CODE (op) == TRUNCATE
&& GET_MODE (XEXP (op, 0)) == mode
&& GET_CODE (XEXP (op, 0)) == MINUS
&& GET_CODE (XEXP (XEXP (op, 0), 0)) == LABEL_REF
&& GET_CODE (XEXP (XEXP (op, 0), 1)) == LABEL_REF)
return XEXP (op, 0);
/* Check for a sign extension of a subreg of a promoted
variable, where the promotion is sign-extended, and the
target mode is the same as the variable's promotion. */
if (GET_CODE (op) == SUBREG
&& SUBREG_PROMOTED_VAR_P (op)
&& ! SUBREG_PROMOTED_UNSIGNED_P (op)
&& GET_MODE (XEXP (op, 0)) == mode)
return XEXP (op, 0);
#if defined(POINTERS_EXTEND_UNSIGNED) && !defined(HAVE_ptr_extend)
if (! POINTERS_EXTEND_UNSIGNED
&& mode == Pmode && GET_MODE (op) == ptr_mode
&& (CONSTANT_P (op)
|| (GET_CODE (op) == SUBREG
&& GET_CODE (SUBREG_REG (op)) == REG
&& REG_POINTER (SUBREG_REG (op))
&& GET_MODE (SUBREG_REG (op)) == Pmode)))
return convert_memory_address (Pmode, op);
#endif
break;
case ZERO_EXTEND:
/* Check for a zero extension of a subreg of a promoted
variable, where the promotion is zero-extended, and the
target mode is the same as the variable's promotion. */
if (GET_CODE (op) == SUBREG
&& SUBREG_PROMOTED_VAR_P (op)
&& SUBREG_PROMOTED_UNSIGNED_P (op)
&& GET_MODE (XEXP (op, 0)) == mode)
return XEXP (op, 0);
#if defined(POINTERS_EXTEND_UNSIGNED) && !defined(HAVE_ptr_extend)
if (POINTERS_EXTEND_UNSIGNED > 0
&& mode == Pmode && GET_MODE (op) == ptr_mode
&& (CONSTANT_P (op)
|| (GET_CODE (op) == SUBREG
&& GET_CODE (SUBREG_REG (op)) == REG
&& REG_POINTER (SUBREG_REG (op))
&& GET_MODE (SUBREG_REG (op)) == Pmode)))
return convert_memory_address (Pmode, op);
#endif
break;
default:
break;
}
return 0;
}
}
/* Subroutine of simplify_associative_operation. Return true if rtx OP
is a suitable integer or floating point immediate constant. */
static bool
associative_constant_p (rtx op)
{
if (GET_CODE (op) == CONST_INT
|| GET_CODE (op) == CONST_DOUBLE)
return true;
op = avoid_constant_pool_reference (op);
return GET_CODE (op) == CONST_INT
|| GET_CODE (op) == CONST_DOUBLE;
}
/* Subroutine of simplify_binary_operation to simplify an associative
binary operation CODE with result mode MODE, operating on OP0 and OP1.
Return 0 if no simplification is possible. */
static rtx
simplify_associative_operation (enum rtx_code code, enum machine_mode mode,
rtx op0, rtx op1)
{
rtx tem;
/* Simplify (x op c1) op c2 as x op (c1 op c2). */
if (GET_CODE (op0) == code
&& associative_constant_p (op1)
&& associative_constant_p (XEXP (op0, 1)))
{
tem = simplify_binary_operation (code, mode, XEXP (op0, 1), op1);
if (! tem)
return tem;
return simplify_gen_binary (code, mode, XEXP (op0, 0), tem);
}
/* Simplify (x op c1) op (y op c2) as (x op y) op (c1 op c2). */
if (GET_CODE (op0) == code
&& GET_CODE (op1) == code
&& associative_constant_p (XEXP (op0, 1))
&& associative_constant_p (XEXP (op1, 1)))
{
rtx c = simplify_binary_operation (code, mode,
XEXP (op0, 1), XEXP (op1, 1));
if (! c)
return 0;
tem = simplify_gen_binary (code, mode, XEXP (op0, 0), XEXP (op1, 0));
return simplify_gen_binary (code, mode, tem, c);
}
/* Canonicalize (x op c) op y as (x op y) op c. */
if (GET_CODE (op0) == code
&& associative_constant_p (XEXP (op0, 1)))
{
tem = simplify_gen_binary (code, mode, XEXP (op0, 0), op1);
return simplify_gen_binary (code, mode, tem, XEXP (op0, 1));
}
/* Canonicalize x op (y op c) as (x op y) op c. */
if (GET_CODE (op1) == code
&& associative_constant_p (XEXP (op1, 1)))
{
tem = simplify_gen_binary (code, mode, op0, XEXP (op1, 0));
return simplify_gen_binary (code, mode, tem, XEXP (op1, 1));
}
return 0;
}
/* Simplify a binary operation CODE with result mode MODE, operating on OP0
and OP1. Return 0 if no simplification is possible.
Don't use this for relational operations such as EQ or LT.
Use simplify_relational_operation instead. */
rtx
simplify_binary_operation (enum rtx_code code, enum machine_mode mode,
rtx op0, rtx op1)
{
HOST_WIDE_INT arg0, arg1, arg0s, arg1s;
HOST_WIDE_INT val;
unsigned int width = GET_MODE_BITSIZE (mode);
rtx tem;
rtx trueop0 = avoid_constant_pool_reference (op0);
rtx trueop1 = avoid_constant_pool_reference (op1);
/* Relational operations don't work here. We must know the mode
of the operands in order to do the comparison correctly.
Assuming a full word can give incorrect results.
Consider comparing 128 with -128 in QImode. */
if (GET_RTX_CLASS (code) == '<')
abort ();
/* Make sure the constant is second. */
if (GET_RTX_CLASS (code) == 'c'
&& swap_commutative_operands_p (trueop0, trueop1))
{
tem = op0, op0 = op1, op1 = tem;
tem = trueop0, trueop0 = trueop1, trueop1 = tem;
}
if (VECTOR_MODE_P (mode)
&& GET_CODE (trueop0) == CONST_VECTOR
&& GET_CODE (trueop1) == CONST_VECTOR)
{
int elt_size = GET_MODE_SIZE (GET_MODE_INNER (mode));
unsigned n_elts = (GET_MODE_SIZE (mode) / elt_size);
enum machine_mode op0mode = GET_MODE (trueop0);
int op0_elt_size = GET_MODE_SIZE (GET_MODE_INNER (op0mode));
unsigned op0_n_elts = (GET_MODE_SIZE (op0mode) / op0_elt_size);
enum machine_mode op1mode = GET_MODE (trueop1);
int op1_elt_size = GET_MODE_SIZE (GET_MODE_INNER (op1mode));
unsigned op1_n_elts = (GET_MODE_SIZE (op1mode) / op1_elt_size);
rtvec v = rtvec_alloc (n_elts);
unsigned int i;
if (op0_n_elts != n_elts || op1_n_elts != n_elts)
abort ();
for (i = 0; i < n_elts; i++)
{
rtx x = simplify_binary_operation (code, GET_MODE_INNER (mode),
CONST_VECTOR_ELT (trueop0, i),
CONST_VECTOR_ELT (trueop1, i));
if (!x)
return 0;
RTVEC_ELT (v, i) = x;
}
return gen_rtx_CONST_VECTOR (mode, v);
}
if (GET_MODE_CLASS (mode) == MODE_FLOAT
&& GET_CODE (trueop0) == CONST_DOUBLE
&& GET_CODE (trueop1) == CONST_DOUBLE
&& mode == GET_MODE (op0) && mode == GET_MODE (op1))
{
REAL_VALUE_TYPE f0, f1, value;
REAL_VALUE_FROM_CONST_DOUBLE (f0, trueop0);
REAL_VALUE_FROM_CONST_DOUBLE (f1, trueop1);
f0 = real_value_truncate (mode, f0);
f1 = real_value_truncate (mode, f1);
if (HONOR_SNANS (mode)
&& (REAL_VALUE_ISNAN (f0) || REAL_VALUE_ISNAN (f1)))
return 0;
if (code == DIV
&& REAL_VALUES_EQUAL (f1, dconst0)
&& (flag_trapping_math || ! MODE_HAS_INFINITIES (mode)))
return 0;
if (MODE_HAS_INFINITIES (mode) && HONOR_NANS (mode)
&& flag_trapping_math
&& REAL_VALUE_ISINF (f0) && REAL_VALUE_ISINF (f1))
{
int s0 = REAL_VALUE_NEGATIVE (f0);
int s1 = REAL_VALUE_NEGATIVE (f1);
switch (code)
{
case PLUS:
/* Inf + -Inf = NaN plus exception. */
if (s0 != s1)
return 0;
break;
case MINUS:
/* Inf - Inf = NaN plus exception. */
if (s0 == s1)
return 0;
break;
case DIV:
/* Inf / Inf = NaN plus exception. */
return 0;
default:
break;
}
}
if (code == MULT && MODE_HAS_INFINITIES (mode) && HONOR_NANS (mode)
&& flag_trapping_math
&& ((REAL_VALUE_ISINF (f0) && REAL_VALUES_EQUAL (f1, dconst0))
|| (REAL_VALUE_ISINF (f1) && REAL_VALUES_EQUAL (f0, dconst0))))
/* Inf * 0 = NaN plus exception. */
return 0;
REAL_ARITHMETIC (value, rtx_to_tree_code (code), f0, f1);
value = real_value_truncate (mode, value);
return CONST_DOUBLE_FROM_REAL_VALUE (value, mode);
}
/* We can fold some multi-word operations. */
if (GET_MODE_CLASS (mode) == MODE_INT
&& width == HOST_BITS_PER_WIDE_INT * 2
&& (GET_CODE (trueop0) == CONST_DOUBLE
|| GET_CODE (trueop0) == CONST_INT)
&& (GET_CODE (trueop1) == CONST_DOUBLE
|| GET_CODE (trueop1) == CONST_INT))
{
unsigned HOST_WIDE_INT l1, l2, lv;
HOST_WIDE_INT h1, h2, hv;
if (GET_CODE (trueop0) == CONST_DOUBLE)
l1 = CONST_DOUBLE_LOW (trueop0), h1 = CONST_DOUBLE_HIGH (trueop0);
else
l1 = INTVAL (trueop0), h1 = HWI_SIGN_EXTEND (l1);
if (GET_CODE (trueop1) == CONST_DOUBLE)
l2 = CONST_DOUBLE_LOW (trueop1), h2 = CONST_DOUBLE_HIGH (trueop1);
else
l2 = INTVAL (trueop1), h2 = HWI_SIGN_EXTEND (l2);
switch (code)
{
case MINUS:
/* A - B == A + (-B). */
neg_double (l2, h2, &lv, &hv);
l2 = lv, h2 = hv;
/* Fall through.... */
case PLUS:
add_double (l1, h1, l2, h2, &lv, &hv);
break;
case MULT:
mul_double (l1, h1, l2, h2, &lv, &hv);
break;
case DIV: case MOD: case UDIV: case UMOD:
/* We'd need to include tree.h to do this and it doesn't seem worth
it. */
return 0;
case AND:
lv = l1 & l2, hv = h1 & h2;
break;
case IOR:
lv = l1 | l2, hv = h1 | h2;
break;
case XOR:
lv = l1 ^ l2, hv = h1 ^ h2;
break;
case SMIN:
if (h1 < h2
|| (h1 == h2
&& ((unsigned HOST_WIDE_INT) l1
< (unsigned HOST_WIDE_INT) l2)))
lv = l1, hv = h1;
else
lv = l2, hv = h2;
break;
case SMAX:
if (h1 > h2
|| (h1 == h2
&& ((unsigned HOST_WIDE_INT) l1
> (unsigned HOST_WIDE_INT) l2)))
lv = l1, hv = h1;
else
lv = l2, hv = h2;
break;
case UMIN:
if ((unsigned HOST_WIDE_INT) h1 < (unsigned HOST_WIDE_INT) h2
|| (h1 == h2
&& ((unsigned HOST_WIDE_INT) l1
< (unsigned HOST_WIDE_INT) l2)))
lv = l1, hv = h1;
else
lv = l2, hv = h2;
break;
case UMAX:
if ((unsigned HOST_WIDE_INT) h1 > (unsigned HOST_WIDE_INT) h2
|| (h1 == h2
&& ((unsigned HOST_WIDE_INT) l1
> (unsigned HOST_WIDE_INT) l2)))
lv = l1, hv = h1;
else
lv = l2, hv = h2;
break;
case LSHIFTRT: case ASHIFTRT:
case ASHIFT:
case ROTATE: case ROTATERT:
#ifdef SHIFT_COUNT_TRUNCATED
if (SHIFT_COUNT_TRUNCATED)
l2 &= (GET_MODE_BITSIZE (mode) - 1), h2 = 0;
#endif
if (h2 != 0 || l2 >= GET_MODE_BITSIZE (mode))
return 0;
if (code == LSHIFTRT || code == ASHIFTRT)
rshift_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv,
code == ASHIFTRT);
else if (code == ASHIFT)
lshift_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv, 1);
else if (code == ROTATE)
lrotate_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv);
else /* code == ROTATERT */
rrotate_double (l1, h1, l2, GET_MODE_BITSIZE (mode), &lv, &hv);
break;
default:
return 0;
}
return immed_double_const (lv, hv, mode);
}
if (GET_CODE (op0) != CONST_INT || GET_CODE (op1) != CONST_INT
|| width > HOST_BITS_PER_WIDE_INT || width == 0)
{
/* Even if we can't compute a constant result,
there are some cases worth simplifying. */
switch (code)
{
case PLUS:
/* Maybe simplify x + 0 to x. The two expressions are equivalent
when x is NaN, infinite, or finite and nonzero. They aren't
when x is -0 and the rounding mode is not towards -infinity,
since (-0) + 0 is then 0. */
if (!HONOR_SIGNED_ZEROS (mode) && trueop1 == CONST0_RTX (mode))
return op0;
/* ((-a) + b) -> (b - a) and similarly for (a + (-b)). These
transformations are safe even for IEEE. */
if (GET_CODE (op0) == NEG)
return simplify_gen_binary (MINUS, mode, op1, XEXP (op0, 0));
else if (GET_CODE (op1) == NEG)
return simplify_gen_binary (MINUS, mode, op0, XEXP (op1, 0));
/* (~a) + 1 -> -a */
if (INTEGRAL_MODE_P (mode)
&& GET_CODE (op0) == NOT
&& trueop1 == const1_rtx)
return simplify_gen_unary (NEG, mode, XEXP (op0, 0), mode);
/* Handle both-operands-constant cases. We can only add
CONST_INTs to constants since the sum of relocatable symbols
can't be handled by most assemblers. Don't add CONST_INT
to CONST_INT since overflow won't be computed properly if wider
than HOST_BITS_PER_WIDE_INT. */
if (CONSTANT_P (op0) && GET_MODE (op0) != VOIDmode
&& GET_CODE (op1) == CONST_INT)
return plus_constant (op0, INTVAL (op1));
else if (CONSTANT_P (op1) && GET_MODE (op1) != VOIDmode
&& GET_CODE (op0) == CONST_INT)
return plus_constant (op1, INTVAL (op0));
/* See if this is something like X * C - X or vice versa or
if the multiplication is written as a shift. If so, we can
distribute and make a new multiply, shift, or maybe just
have X (if C is 2 in the example above). But don't make
real multiply if we didn't have one before. */
if (! FLOAT_MODE_P (mode))
{
HOST_WIDE_INT coeff0 = 1, coeff1 = 1;
rtx lhs = op0, rhs = op1;
int had_mult = 0;
if (GET_CODE (lhs) == NEG)
coeff0 = -1, lhs = XEXP (lhs, 0);
else if (GET_CODE (lhs) == MULT
&& GET_CODE (XEXP (lhs, 1)) == CONST_INT)
{
coeff0 = INTVAL (XEXP (lhs, 1)), lhs = XEXP (lhs, 0);
had_mult = 1;
}
else if (GET_CODE (lhs) == ASHIFT
&& GET_CODE (XEXP (lhs, 1)) == CONST_INT
&& INTVAL (XEXP (lhs, 1)) >= 0
&& INTVAL (XEXP (lhs, 1)) < HOST_BITS_PER_WIDE_INT)
{
coeff0 = ((HOST_WIDE_INT) 1) << INTVAL (XEXP (lhs, 1));
lhs = XEXP (lhs, 0);
}
if (GET_CODE (rhs) == NEG)
coeff1 = -1, rhs = XEXP (rhs, 0);
else if (GET_CODE (rhs) == MULT
&& GET_CODE (XEXP (rhs, 1)) == CONST_INT)
{
coeff1 = INTVAL (XEXP (rhs, 1)), rhs = XEXP (rhs, 0);
had_mult = 1;
}
else if (GET_CODE (rhs) == ASHIFT
&& GET_CODE (XEXP (rhs, 1)) == CONST_INT
&& INTVAL (XEXP (rhs, 1)) >= 0
&& INTVAL (XEXP (rhs, 1)) < HOST_BITS_PER_WIDE_INT)
{
coeff1 = ((HOST_WIDE_INT) 1) << INTVAL (XEXP (rhs, 1));
rhs = XEXP (rhs, 0);
}
if (rtx_equal_p (lhs, rhs))
{
tem = simplify_gen_binary (MULT, mode, lhs,
GEN_INT (coeff0 + coeff1));
return (GET_CODE (tem) == MULT && ! had_mult) ? 0 : tem;
}
}
/* If one of the operands is a PLUS or a MINUS, see if we can
simplify this by the associative law.
Don't use the associative law for floating point.
The inaccuracy makes it nonassociative,
and subtle programs can break if operations are associated. */
if (INTEGRAL_MODE_P (mode)
&& (GET_CODE (op0) == PLUS || GET_CODE (op0) == MINUS
|| GET_CODE (op1) == PLUS || GET_CODE (op1) == MINUS
|| (GET_CODE (op0) == CONST
&& GET_CODE (XEXP (op0, 0)) == PLUS)
|| (GET_CODE (op1) == CONST
&& GET_CODE (XEXP (op1, 0)) == PLUS))
&& (tem = simplify_plus_minus (code, mode, op0, op1, 0)) != 0)
return tem;
/* Reassociate floating point addition only when the user
specifies unsafe math optimizations. */
if (FLOAT_MODE_P (mode)
&& flag_unsafe_math_optimizations)
{
tem = simplify_associative_operation (code, mode, op0, op1);
if (tem)
return tem;
}
break;
case COMPARE:
#ifdef HAVE_cc0
/* Convert (compare FOO (const_int 0)) to FOO unless we aren't
using cc0, in which case we want to leave it as a COMPARE
so we can distinguish it from a register-register-copy.
In IEEE floating point, x-0 is not the same as x. */
if ((TARGET_FLOAT_FORMAT != IEEE_FLOAT_FORMAT
|| ! FLOAT_MODE_P (mode) || flag_unsafe_math_optimizations)
&& trueop1 == CONST0_RTX (mode))
return op0;
#endif
/* Convert (compare (gt (flags) 0) (lt (flags) 0)) to (flags). */
if (((GET_CODE (op0) == GT && GET_CODE (op1) == LT)
|| (GET_CODE (op0) == GTU && GET_CODE (op1) == LTU))
&& XEXP (op0, 1) == const0_rtx && XEXP (op1, 1) == const0_rtx)
{
rtx xop00 = XEXP (op0, 0);
rtx xop10 = XEXP (op1, 0);
#ifdef HAVE_cc0
if (GET_CODE (xop00) == CC0 && GET_CODE (xop10) == CC0)
#else
if (GET_CODE (xop00) == REG && GET_CODE (xop10) == REG
&& GET_MODE (xop00) == GET_MODE (xop10)
&& REGNO (xop00) == REGNO (xop10)
&& GET_MODE_CLASS (GET_MODE (xop00)) == MODE_CC
&& GET_MODE_CLASS (GET_MODE (xop10)) == MODE_CC)
#endif
return xop00;
}
break;
case MINUS:
/* We can't assume x-x is 0 even with non-IEEE floating point,
but since it is zero except in very strange circumstances, we
will treat it as zero with -funsafe-math-optimizations. */
if (rtx_equal_p (trueop0, trueop1)
&& ! side_effects_p (op0)
&& (! FLOAT_MODE_P (mode) || flag_unsafe_math_optimizations))
return CONST0_RTX (mode);
/* Change subtraction from zero into negation. (0 - x) is the
same as -x when x is NaN, infinite, or finite and nonzero.
But if the mode has signed zeros, and does not round towards
-infinity, then 0 - 0 is 0, not -0. */
if (!HONOR_SIGNED_ZEROS (mode) && trueop0 == CONST0_RTX (mode))
return simplify_gen_unary (NEG, mode, op1, mode);
/* (-1 - a) is ~a. */
if (trueop0 == constm1_rtx)
return simplify_gen_unary (NOT, mode, op1, mode);
/* Subtracting 0 has no effect unless the mode has signed zeros
and supports rounding towards -infinity. In such a case,
0 - 0 is -0. */
if (!(HONOR_SIGNED_ZEROS (mode)
&& HONOR_SIGN_DEPENDENT_ROUNDING (mode))
&& trueop1 == CONST0_RTX (mode))
return op0;
/* See if this is something like X * C - X or vice versa or
if the multiplication is written as a shift. If so, we can
distribute and make a new multiply, shift, or maybe just
have X (if C is 2 in the example above). But don't make
real multiply if we didn't have one before. */
if (! FLOAT_MODE_P (mode))
{
HOST_WIDE_INT coeff0 = 1, coeff1 = 1;
rtx lhs = op0, rhs = op1;
int had_mult = 0;
if (GET_CODE (lhs) == NEG)
coeff0 = -1, lhs = XEXP (lhs, 0);
else if (GET_CODE (lhs) == MULT
&& GET_CODE (XEXP (lhs, 1)) == CONST_INT)
{
coeff0 = INTVAL (XEXP (lhs, 1)), lhs = XEXP (lhs, 0);
had_mult = 1;
}
else if (GET_CODE (lhs) == ASHIFT
&& GET_CODE (XEXP (lhs, 1)) == CONST_INT
&& INTVAL (XEXP (lhs, 1)) >= 0
&& INTVAL (XEXP (lhs, 1)) < HOST_BITS_PER_WIDE_INT)
{
coeff0 = ((HOST_WIDE_INT) 1) << INTVAL (XEXP (lhs, 1));
lhs = XEXP (lhs, 0);
}
if (GET_CODE (rhs) == NEG)
coeff1 = - 1, rhs = XEXP (rhs, 0);
else if (GET_CODE (rhs) == MULT
&& GET_CODE (XEXP (rhs, 1)) == CONST_INT)
{
coeff1 = INTVAL (XEXP (rhs, 1)), rhs = XEXP (rhs, 0);
had_mult = 1;
}
else if (GET_CODE (rhs) == ASHIFT
&& GET_CODE (XEXP (rhs, 1)) == CONST_INT
&& INTVAL (XEXP (rhs, 1)) >= 0
&& INTVAL (XEXP (rhs, 1)) < HOST_BITS_PER_WIDE_INT)
{
coeff1 = ((HOST_WIDE_INT) 1) << INTVAL (XEXP (rhs, 1));
rhs = XEXP (rhs, 0);
}
if (rtx_equal_p (lhs, rhs))
{
tem = simplify_gen_binary (MULT, mode, lhs,
GEN_INT (coeff0 - coeff1));
return (GET_CODE (tem) == MULT && ! had_mult) ? 0 : tem;
}
}
/* (a - (-b)) -> (a + b). True even for IEEE. */
if (GET_CODE (op1) == NEG)
return simplify_gen_binary (PLUS, mode, op0, XEXP (op1, 0));
/* (-x - c) may be simplified as (-c - x). */
if (GET_CODE (op0) == NEG
&& (GET_CODE (op1) == CONST_INT
|| GET_CODE (op1) == CONST_DOUBLE))
{
tem = simplify_unary_operation (NEG, mode, op1, mode);
if (tem)
return simplify_gen_binary (MINUS, mode, tem, XEXP (op0, 0));
}
/* If one of the operands is a PLUS or a MINUS, see if we can
simplify this by the associative law.
Don't use the associative law for floating point.
The inaccuracy makes it nonassociative,
and subtle programs can break if operations are associated. */
if (INTEGRAL_MODE_P (mode)
&& (GET_CODE (op0) == PLUS || GET_CODE (op0) == MINUS
|| GET_CODE (op1) == PLUS || GET_CODE (op1) == MINUS
|| (GET_CODE (op0) == CONST
&& GET_CODE (XEXP (op0, 0)) == PLUS)
|| (GET_CODE (op1) == CONST
&& GET_CODE (XEXP (op1, 0)) == PLUS))
&& (tem = simplify_plus_minus (code, mode, op0, op1, 0)) != 0)
return tem;
/* Don't let a relocatable value get a negative coeff. */
if (GET_CODE (op1) == CONST_INT && GET_MODE (op0) != VOIDmode)
return simplify_gen_binary (PLUS, mode,
op0,
neg_const_int (mode, op1));
/* (x - (x & y)) -> (x & ~y) */
if (GET_CODE (op1) == AND)
{
if (rtx_equal_p (op0, XEXP (op1, 0)))
{
tem = simplify_gen_unary (NOT, mode, XEXP (op1, 1),
GET_MODE (XEXP (op1, 1)));
return simplify_gen_binary (AND, mode, op0, tem);
}
if (rtx_equal_p (op0, XEXP (op1, 1)))
{
tem = simplify_gen_unary (NOT, mode, XEXP (op1, 0),
GET_MODE (XEXP (op1, 0)));
return simplify_gen_binary (AND, mode, op0, tem);
}
}
break;
case MULT:
if (trueop1 == constm1_rtx)
return simplify_gen_unary (NEG, mode, op0, mode);
/* Maybe simplify x * 0 to 0. The reduction is not valid if
x is NaN, since x * 0 is then also NaN. Nor is it valid
when the mode has signed zeros, since multiplying a negative
number by 0 will give -0, not 0. */
if (!HONOR_NANS (mode)
&& !HONOR_SIGNED_ZEROS (mode)
&& trueop1 == CONST0_RTX (mode)
&& ! side_effects_p (op0))
return op1;
/* In IEEE floating point, x*1 is not equivalent to x for
signalling NaNs. */
if (!HONOR_SNANS (mode)
&& trueop1 == CONST1_RTX (mode))
return op0;
/* Convert multiply by constant power of two into shift unless
we are still generating RTL. This test is a kludge. */
if (GET_CODE (trueop1) == CONST_INT
&& (val = exact_log2 (INTVAL (trueop1))) >= 0
/* If the mode is larger than the host word size, and the
uppermost bit is set, then this isn't a power of two due
to implicit sign extension. */
&& (width <= HOST_BITS_PER_WIDE_INT
|| val != HOST_BITS_PER_WIDE_INT - 1)
&& ! rtx_equal_function_value_matters)
return simplify_gen_binary (ASHIFT, mode, op0, GEN_INT (val));
/* x*2 is x+x and x*(-1) is -x */
if (GET_CODE (trueop1) == CONST_DOUBLE
&& GET_MODE_CLASS (GET_MODE (trueop1)) == MODE_FLOAT
&& GET_MODE (op0) == mode)
{
REAL_VALUE_TYPE d;
REAL_VALUE_FROM_CONST_DOUBLE (d, trueop1);
if (REAL_VALUES_EQUAL (d, dconst2))
return simplify_gen_binary (PLUS, mode, op0, copy_rtx (op0));
if (REAL_VALUES_EQUAL (d, dconstm1))
return simplify_gen_unary (NEG, mode, op0, mode);
}
/* Reassociate multiplication, but for floating point MULTs
only when the user specifies unsafe math optimizations. */
if (! FLOAT_MODE_P (mode)
|| flag_unsafe_math_optimizations)
{
tem = simplify_associative_operation (code, mode, op0, op1);
if (tem)
return tem;
}
break;
case IOR:
if (trueop1 == const0_rtx)
return op0;
if (GET_CODE (trueop1) == CONST_INT
&& ((INTVAL (trueop1) & GET_MODE_MASK (mode))
== GET_MODE_MASK (mode)))
return op1;
if (rtx_equal_p (trueop0, trueop1) && ! side_effects_p (op0))
return op0;
/* A | (~A) -> -1 */
if (((GET_CODE (op0) == NOT && rtx_equal_p (XEXP (op0, 0), op1))
|| (GET_CODE (op1) == NOT && rtx_equal_p (XEXP (op1, 0), op0)))
&& ! side_effects_p (op0)
&& GET_MODE_CLASS (mode) != MODE_CC)
return constm1_rtx;
tem = simplify_associative_operation (code, mode, op0, op1);
if (tem)
return tem;
break;
case XOR:
if (trueop1 == const0_rtx)
return op0;
if (GET_CODE (trueop1) == CONST_INT
&& ((INTVAL (trueop1) & GET_MODE_MASK (mode))
== GET_MODE_MASK (mode)))
return simplify_gen_unary (NOT, mode, op0, mode);
if (trueop0 == trueop1 && ! side_effects_p (op0)
&& GET_MODE_CLASS (mode) != MODE_CC)
return const0_rtx;
tem = simplify_associative_operation (code, mode, op0, op1);
if (tem)
return tem;
break;
case AND:
if (trueop1 == const0_rtx && ! side_effects_p (op0))
return const0_rtx;
if (GET_CODE (trueop1) == CONST_INT
&& ((INTVAL (trueop1) & GET_MODE_MASK (mode))
== GET_MODE_MASK (mode)))
return op0;
if (trueop0 == trueop1 && ! side_effects_p (op0)
&& GET_MODE_CLASS (mode) != MODE_CC)
return op0;
/* A & (~A) -> 0 */
if (((GET_CODE (op0) == NOT && rtx_equal_p (XEXP (op0, 0), op1))
|| (GET_CODE (op1) == NOT && rtx_equal_p (XEXP (op1, 0), op0)))
&& ! side_effects_p (op0)
&& GET_MODE_CLASS (mode) != MODE_CC)
return const0_rtx;
tem = simplify_associative_operation (code, mode, op0, op1);
if (tem)
return tem;
break;
case UDIV:
/* Convert divide by power of two into shift (divide by 1 handled
below). */
if (GET_CODE (trueop1) == CONST_INT
&& (arg1 = exact_log2 (INTVAL (trueop1))) > 0)
return simplify_gen_binary (LSHIFTRT, mode, op0, GEN_INT (arg1));
/* Fall through.... */
case DIV:
if (trueop1 == CONST1_RTX (mode))
{
/* On some platforms DIV uses narrower mode than its
operands. */
rtx x = gen_lowpart_common (mode, op0);
if (x)
return x;
else if (mode != GET_MODE (op0) && GET_MODE (op0) != VOIDmode)
return gen_lowpart_SUBREG (mode, op0);
else
return op0;
}
/* Maybe change 0 / x to 0. This transformation isn't safe for
modes with NaNs, since 0 / 0 will then be NaN rather than 0.
Nor is it safe for modes with signed zeros, since dividing
0 by a negative number gives -0, not 0. */
if (!HONOR_NANS (mode)
&& !HONOR_SIGNED_ZEROS (mode)
&& trueop0 == CONST0_RTX (mode)
&& ! side_effects_p (op1))
return op0;
/* Change division by a constant into multiplication. Only do
this with -funsafe-math-optimizations. */
else if (GET_CODE (trueop1) == CONST_DOUBLE
&& GET_MODE_CLASS (GET_MODE (trueop1)) == MODE_FLOAT
&& trueop1 != CONST0_RTX (mode)
&& flag_unsafe_math_optimizations)
{
REAL_VALUE_TYPE d;
REAL_VALUE_FROM_CONST_DOUBLE (d, trueop1);
if (! REAL_VALUES_EQUAL (d, dconst0))
{
REAL_ARITHMETIC (d, rtx_to_tree_code (DIV), dconst1, d);
tem = CONST_DOUBLE_FROM_REAL_VALUE (d, mode);
return simplify_gen_binary (MULT, mode, op0, tem);
}
}
break;
case UMOD:
/* Handle modulus by power of two (mod with 1 handled below). */
if (GET_CODE (trueop1) == CONST_INT
&& exact_log2 (INTVAL (trueop1)) > 0)
return simplify_gen_binary (AND, mode, op0,
GEN_INT (INTVAL (op1) - 1));
/* Fall through.... */
case MOD:
if ((trueop0 == const0_rtx || trueop1 == const1_rtx)
&& ! side_effects_p (op0) && ! side_effects_p (op1))
return const0_rtx;
break;
case ROTATERT:
case ROTATE:
case ASHIFTRT:
/* Rotating ~0 always results in ~0. */
if (GET_CODE (trueop0) == CONST_INT && width <= HOST_BITS_PER_WIDE_INT
&& (unsigned HOST_WIDE_INT) INTVAL (trueop0) == GET_MODE_MASK (mode)
&& ! side_effects_p (op1))
return op0;
/* Fall through.... */
case ASHIFT:
case LSHIFTRT:
if (trueop1 == const0_rtx)
return op0;
if (trueop0 == const0_rtx && ! side_effects_p (op1))
return op0;
break;
case SMIN:
if (width <= HOST_BITS_PER_WIDE_INT
&& GET_CODE (trueop1) == CONST_INT
&& INTVAL (trueop1) == (HOST_WIDE_INT) 1 << (width -1)
&& ! side_effects_p (op0))
return op1;
if (rtx_equal_p (trueop0, trueop1) && ! side_effects_p (op0))
return op0;
tem = simplify_associative_operation (code, mode, op0, op1);
if (tem)
return tem;
break;
case SMAX:
if (width <= HOST_BITS_PER_WIDE_INT
&& GET_CODE (trueop1) == CONST_INT
&& ((unsigned HOST_WIDE_INT) INTVAL (trueop1)
== (unsigned HOST_WIDE_INT) GET_MODE_MASK (mode) >> 1)
&& ! side_effects_p (op0))
return op1;
if (rtx_equal_p (trueop0, trueop1) && ! side_effects_p (op0))
return op0;
tem = simplify_associative_operation (code, mode, op0, op1);
if (tem)
return tem;
break;
case UMIN:
if (trueop1 == const0_rtx && ! side_effects_p (op0))
return op1;
if (rtx_equal_p (trueop0, trueop1) && ! side_effects_p (op0))
return op0;
tem = simplify_associative_operation (code, mode, op0, op1);
if (tem)
return tem;
break;
case UMAX:
if (trueop1 == constm1_rtx && ! side_effects_p (op0))
return op1;
if (rtx_equal_p (trueop0, trueop1) && ! side_effects_p (op0))
return op0;
tem = simplify_associative_operation (code, mode, op0, op1);
if (tem)
return tem;
break;
case SS_PLUS:
case US_PLUS:
case SS_MINUS:
case US_MINUS:
/* ??? There are simplifications that can be done. */
return 0;
case VEC_SELECT:
if (!VECTOR_MODE_P (mode))
{
if (!VECTOR_MODE_P (GET_MODE (trueop0))
|| (mode
!= GET_MODE_INNER (GET_MODE (trueop0)))
|| GET_CODE (trueop1) != PARALLEL
|| XVECLEN (trueop1, 0) != 1
|| GET_CODE (XVECEXP (trueop1, 0, 0)) != CONST_INT)
abort ();
if (GET_CODE (trueop0) == CONST_VECTOR)
return CONST_VECTOR_ELT (trueop0, INTVAL (XVECEXP (trueop1, 0, 0)));
}
else
{
if (!VECTOR_MODE_P (GET_MODE (trueop0))
|| (GET_MODE_INNER (mode)
!= GET_MODE_INNER (GET_MODE (trueop0)))
|| GET_CODE (trueop1) != PARALLEL)
abort ();
if (GET_CODE (trueop0) == CONST_VECTOR)
{
int elt_size = GET_MODE_SIZE (GET_MODE_INNER (mode));
unsigned n_elts = (GET_MODE_SIZE (mode) / elt_size);
rtvec v = rtvec_alloc (n_elts);
unsigned int i;
if (XVECLEN (trueop1, 0) != (int) n_elts)
abort ();
for (i = 0; i < n_elts; i++)
{
rtx x = XVECEXP (trueop1, 0, i);
if (GET_CODE (x) != CONST_INT)
abort ();
RTVEC_ELT (v, i) = CONST_VECTOR_ELT (trueop0, INTVAL (x));
}
return gen_rtx_CONST_VECTOR (mode, v);
}
}
return 0;
case VEC_CONCAT:
{
enum machine_mode op0_mode = (GET_MODE (trueop0) != VOIDmode
? GET_MODE (trueop0)
: GET_MODE_INNER (mode));
enum machine_mode op1_mode = (GET_MODE (trueop1) != VOIDmode
? GET_MODE (trueop1)
: GET_MODE_INNER (mode));
if (!VECTOR_MODE_P (mode)
|| (GET_MODE_SIZE (op0_mode) + GET_MODE_SIZE (op1_mode)
!= GET_MODE_SIZE (mode)))
abort ();
if ((VECTOR_MODE_P (op0_mode)
&& (GET_MODE_INNER (mode)
!= GET_MODE_INNER (op0_mode)))
|| (!VECTOR_MODE_P (op0_mode)
&& GET_MODE_INNER (mode) != op0_mode))
abort ();
if ((VECTOR_MODE_P (op1_mode)
&& (GET_MODE_INNER (mode)
!= GET_MODE_INNER (op1_mode)))
|| (!VECTOR_MODE_P (op1_mode)
&& GET_MODE_INNER (mode) != op1_mode))
abort ();
if ((GET_CODE (trueop0) == CONST_VECTOR
|| GET_CODE (trueop0) == CONST_INT
|| GET_CODE (trueop0) == CONST_DOUBLE)
&& (GET_CODE (trueop1) == CONST_VECTOR
|| GET_CODE (trueop1) == CONST_INT
|| GET_CODE (trueop1) == CONST_DOUBLE))
{
int elt_size = GET_MODE_SIZE (GET_MODE_INNER (mode));
unsigned n_elts = (GET_MODE_SIZE (mode) / elt_size);
rtvec v = rtvec_alloc (n_elts);
unsigned int i;
unsigned in_n_elts = 1;
if (VECTOR_MODE_P (op0_mode))
in_n_elts = (GET_MODE_SIZE (op0_mode) / elt_size);
for (i = 0; i < n_elts; i++)
{
if (i < in_n_elts)
{
if (!VECTOR_MODE_P (op0_mode))
RTVEC_ELT (v, i) = trueop0;
else
RTVEC_ELT (v, i) = CONST_VECTOR_ELT (trueop0, i);
}
else
{
if (!VECTOR_MODE_P (op1_mode))
RTVEC_ELT (v, i) = trueop1;
else
RTVEC_ELT (v, i) = CONST_VECTOR_ELT (trueop1,
i - in_n_elts);
}
}
return gen_rtx_CONST_VECTOR (mode, v);
}
}
return 0;
default:
abort ();
}
return 0;
}
/* Get the integer argument values in two forms:
zero-extended in ARG0, ARG1 and sign-extended in ARG0S, ARG1S. */
arg0 = INTVAL (trueop0);
arg1 = INTVAL (trueop1);
if (width < HOST_BITS_PER_WIDE_INT)
{
arg0 &= ((HOST_WIDE_INT) 1 << width) - 1;
arg1 &= ((HOST_WIDE_INT) 1 << width) - 1;
arg0s = arg0;
if (arg0s & ((HOST_WIDE_INT) 1 << (width - 1)))
arg0s |= ((HOST_WIDE_INT) (-1) << width);
arg1s = arg1;
if (arg1s & ((HOST_WIDE_INT) 1 << (width - 1)))
arg1s |= ((HOST_WIDE_INT) (-1) << width);
}
else
{
arg0s = arg0;
arg1s = arg1;
}
/* Compute the value of the arithmetic. */
switch (code)
{
case PLUS:
val = arg0s + arg1s;
break;
case MINUS:
val = arg0s - arg1s;
break;
case MULT:
val = arg0s * arg1s;
break;
case DIV:
if (arg1s == 0
|| (arg0s == (HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT - 1)
&& arg1s == -1))
return 0;
val = arg0s / arg1s;
break;
case MOD:
if (arg1s == 0
|| (arg0s == (HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT - 1)
&& arg1s == -1))
return 0;
val = arg0s % arg1s;
break;
case UDIV:
if (arg1 == 0
|| (arg0s == (HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT - 1)
&& arg1s == -1))
return 0;
val = (unsigned HOST_WIDE_INT) arg0 / arg1;
break;
case UMOD:
if (arg1 == 0
|| (arg0s == (HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT - 1)
&& arg1s == -1))
return 0;
val = (unsigned HOST_WIDE_INT) arg0 % arg1;
break;
case AND:
val = arg0 & arg1;
break;
case IOR:
val = arg0 | arg1;
break;
case XOR:
val = arg0 ^ arg1;
break;
case LSHIFTRT:
/* If shift count is undefined, don't fold it; let the machine do
what it wants. But truncate it if the machine will do that. */
if (arg1 < 0)
return 0;
#ifdef SHIFT_COUNT_TRUNCATED
if (SHIFT_COUNT_TRUNCATED)
arg1 %= width;
#endif
val = ((unsigned HOST_WIDE_INT) arg0) >> arg1;
break;
case ASHIFT:
if (arg1 < 0)
return 0;
#ifdef SHIFT_COUNT_TRUNCATED
if (SHIFT_COUNT_TRUNCATED)
arg1 %= width;
#endif
val = ((unsigned HOST_WIDE_INT) arg0) << arg1;
break;
case ASHIFTRT:
if (arg1 < 0)
return 0;
#ifdef SHIFT_COUNT_TRUNCATED
if (SHIFT_COUNT_TRUNCATED)
arg1 %= width;
#endif
val = arg0s >> arg1;
/* Bootstrap compiler may not have sign extended the right shift.
Manually extend the sign to insure bootstrap cc matches gcc. */
if (arg0s < 0 && arg1 > 0)
val |= ((HOST_WIDE_INT) -1) << (HOST_BITS_PER_WIDE_INT - arg1);
break;
case ROTATERT:
if (arg1 < 0)
return 0;
arg1 %= width;
val = ((((unsigned HOST_WIDE_INT) arg0) << (width - arg1))
| (((unsigned HOST_WIDE_INT) arg0) >> arg1));
break;
case ROTATE:
if (arg1 < 0)
return 0;
arg1 %= width;
val = ((((unsigned HOST_WIDE_INT) arg0) << arg1)
| (((unsigned HOST_WIDE_INT) arg0) >> (width - arg1)));
break;
case COMPARE:
/* Do nothing here. */
return 0;
case SMIN:
val = arg0s <= arg1s ? arg0s : arg1s;
break;
case UMIN:
val = ((unsigned HOST_WIDE_INT) arg0
<= (unsigned HOST_WIDE_INT) arg1 ? arg0 : arg1);
break;
case SMAX:
val = arg0s > arg1s ? arg0s : arg1s;
break;
case UMAX:
val = ((unsigned HOST_WIDE_INT) arg0
> (unsigned HOST_WIDE_INT) arg1 ? arg0 : arg1);
break;
case SS_PLUS:
case US_PLUS:
case SS_MINUS:
case US_MINUS:
/* ??? There are simplifications that can be done. */
return 0;
default:
abort ();
}
val = trunc_int_for_mode (val, mode);
return GEN_INT (val);
}
/* Simplify a PLUS or MINUS, at least one of whose operands may be another
PLUS or MINUS.
Rather than test for specific case, we do this by a brute-force method
and do all possible simplifications until no more changes occur. Then
we rebuild the operation.
If FORCE is true, then always generate the rtx. This is used to
canonicalize stuff emitted from simplify_gen_binary. Note that this
can still fail if the rtx is too complex. It won't fail just because
the result is not 'simpler' than the input, however. */
struct simplify_plus_minus_op_data
{
rtx op;
int neg;
};
static int
simplify_plus_minus_op_data_cmp (const void *p1, const void *p2)
{
const struct simplify_plus_minus_op_data *d1 = p1;
const struct simplify_plus_minus_op_data *d2 = p2;
return (commutative_operand_precedence (d2->op)
- commutative_operand_precedence (d1->op));
}
static rtx
simplify_plus_minus (enum rtx_code code, enum machine_mode mode, rtx op0,
rtx op1, int force)
{
struct simplify_plus_minus_op_data ops[8];
rtx result, tem;
int n_ops = 2, input_ops = 2, input_consts = 0, n_consts;
int first, changed;
int i, j;
memset (ops, 0, sizeof ops);
/* Set up the two operands and then expand them until nothing has been
changed. If we run out of room in our array, give up; this should
almost never happen. */
ops[0].op = op0;
ops[0].neg = 0;
ops[1].op = op1;
ops[1].neg = (code == MINUS);
do
{
changed = 0;
for (i = 0; i < n_ops; i++)
{
rtx this_op = ops[i].op;
int this_neg = ops[i].neg;
enum rtx_code this_code = GET_CODE (this_op);
switch (this_code)
{
case PLUS:
case MINUS:
if (n_ops == 7)
return NULL_RTX;
ops[n_ops].op = XEXP (this_op, 1);
ops[n_ops].neg = (this_code == MINUS) ^ this_neg;
n_ops++;
ops[i].op = XEXP (this_op, 0);
input_ops++;
changed = 1;
break;
case NEG:
ops[i].op = XEXP (this_op, 0);
ops[i].neg = ! this_neg;
changed = 1;
break;
case CONST:
if (n_ops < 7
&& GET_CODE (XEXP (this_op, 0)) == PLUS
&& CONSTANT_P (XEXP (XEXP (this_op, 0), 0))
&& CONSTANT_P (XEXP (XEXP (this_op, 0), 1)))
{
ops[i].op = XEXP (XEXP (this_op, 0), 0);
ops[n_ops].op = XEXP (XEXP (this_op, 0), 1);
ops[n_ops].neg = this_neg;
n_ops++;
input_consts++;
changed = 1;
}
break;
case NOT:
/* ~a -> (-a - 1) */
if (n_ops != 7)
{
ops[n_ops].op = constm1_rtx;
ops[n_ops++].neg = this_neg;
ops[i].op = XEXP (this_op, 0);
ops[i].neg = !this_neg;
changed = 1;
}
break;
case CONST_INT:
if (this_neg)
{
ops[i].op = neg_const_int (mode, this_op);
ops[i].neg = 0;
changed = 1;
}
break;
default:
break;
}
}
}
while (changed);
/* If we only have two operands, we can't do anything. */
if (n_ops <= 2 && !force)
return NULL_RTX;
/* Count the number of CONSTs we didn't split above. */
for (i = 0; i < n_ops; i++)
if (GET_CODE (ops[i].op) == CONST)
input_consts++;
/* Now simplify each pair of operands until nothing changes. The first
time through just simplify constants against each other. */
first = 1;
do
{
changed = first;
for (i = 0; i < n_ops - 1; i++)
for (j = i + 1; j < n_ops; j++)
{
rtx lhs = ops[i].op, rhs = ops[j].op;
int lneg = ops[i].neg, rneg = ops[j].neg;
if (lhs != 0 && rhs != 0
&& (! first || (CONSTANT_P (lhs) && CONSTANT_P (rhs))))
{
enum rtx_code ncode = PLUS;
if (lneg != rneg)
{
ncode = MINUS;
if (lneg)
tem = lhs, lhs = rhs, rhs = tem;
}
else if (swap_commutative_operands_p (lhs, rhs))
tem = lhs, lhs = rhs, rhs = tem;
tem = simplify_binary_operation (ncode, mode, lhs, rhs);
/* Reject "simplifications" that just wrap the two
arguments in a CONST. Failure to do so can result
in infinite recursion with simplify_binary_operation
when it calls us to simplify CONST operations. */
if (tem
&& ! (GET_CODE (tem) == CONST
&& GET_CODE (XEXP (tem, 0)) == ncode
&& XEXP (XEXP (tem, 0), 0) == lhs
&& XEXP (XEXP (tem, 0), 1) == rhs)
/* Don't allow -x + -1 -> ~x simplifications in the
first pass. This allows us the chance to combine
the -1 with other constants. */
&& ! (first
&& GET_CODE (tem) == NOT
&& XEXP (tem, 0) == rhs))
{
lneg &= rneg;
if (GET_CODE (tem) == NEG)
tem = XEXP (tem, 0), lneg = !lneg;
if (GET_CODE (tem) == CONST_INT && lneg)
tem = neg_const_int (mode, tem), lneg = 0;
ops[i].op = tem;
ops[i].neg = lneg;
ops[j].op = NULL_RTX;
changed = 1;
}
}
}
first = 0;
}
while (changed);
/* Pack all the operands to the lower-numbered entries. */
for (i = 0, j = 0; j < n_ops; j++)
if (ops[j].op)
ops[i++] = ops[j];
n_ops = i;
/* Sort the operations based on swap_commutative_operands_p. */
qsort (ops, n_ops, sizeof (*ops), simplify_plus_minus_op_data_cmp);
/* Create (minus -C X) instead of (neg (const (plus X C))). */
if (n_ops == 2
&& GET_CODE (ops[1].op) == CONST_INT
&& CONSTANT_P (ops[0].op)
&& ops[0].neg)
return gen_rtx_fmt_ee (MINUS, mode, ops[1].op, ops[0].op);
/* We suppressed creation of trivial CONST expressions in the
combination loop to avoid recursion. Create one manually now.
The combination loop should have ensured that there is exactly
one CONST_INT, and the sort will have ensured that it is last
in the array and that any other constant will be next-to-last. */
if (n_ops > 1
&& GET_CODE (ops[n_ops - 1].op) == CONST_INT
&& CONSTANT_P (ops[n_ops - 2].op))
{
rtx value = ops[n_ops - 1].op;
if (ops[n_ops - 1].neg ^ ops[n_ops - 2].neg)
value = neg_const_int (mode, value);
ops[n_ops - 2].op = plus_constant (ops[n_ops - 2].op, INTVAL (value));
n_ops--;
}
/* Count the number of CONSTs that we generated. */
n_consts = 0;
for (i = 0; i < n_ops; i++)
if (GET_CODE (ops[i].op) == CONST)
n_consts++;
/* Give up if we didn't reduce the number of operands we had. Make
sure we count a CONST as two operands. If we have the same
number of operands, but have made more CONSTs than before, this
is also an improvement, so accept it. */
if (!force
&& (n_ops + n_consts > input_ops
|| (n_ops + n_consts == input_ops && n_consts <= input_consts)))
return NULL_RTX;
/* Put a non-negated operand first, if possible. */
for (i = 0; i < n_ops && ops[i].neg; i++)
continue;
if (i == n_ops)
ops[0].op = gen_rtx_NEG (mode, ops[0].op);
else if (i != 0)
{
tem = ops[0].op;
ops[0] = ops[i];
ops[i].op = tem;
ops[i].neg = 1;
}
/* Now make the result by performing the requested operations. */
result = ops[0].op;
for (i = 1; i < n_ops; i++)
result = gen_rtx_fmt_ee (ops[i].neg ? MINUS : PLUS,
mode, result, ops[i].op);
return result;
}
/* Like simplify_binary_operation except used for relational operators.
MODE is the mode of the operands, not that of the result. If MODE
is VOIDmode, both operands must also be VOIDmode and we compare the
operands in "infinite precision".
If no simplification is possible, this function returns zero. Otherwise,
it returns either const_true_rtx or const0_rtx. */
rtx
simplify_relational_operation (enum rtx_code code, enum machine_mode mode,
rtx op0, rtx op1)
{
int equal, op0lt, op0ltu, op1lt, op1ltu;
rtx tem;
rtx trueop0;
rtx trueop1;
if (mode == VOIDmode
&& (GET_MODE (op0) != VOIDmode
|| GET_MODE (op1) != VOIDmode))
abort ();
/* If op0 is a compare, extract the comparison arguments from it. */
if (GET_CODE (op0) == COMPARE && op1 == const0_rtx)
op1 = XEXP (op0, 1), op0 = XEXP (op0, 0);
trueop0 = avoid_constant_pool_reference (op0);
trueop1 = avoid_constant_pool_reference (op1);
/* We can't simplify MODE_CC values since we don't know what the
actual comparison is. */
if (GET_MODE_CLASS (GET_MODE (op0)) == MODE_CC || CC0_P (op0))
return 0;
/* Make sure the constant is second. */
if (swap_commutative_operands_p (trueop0, trueop1))
{
tem = op0, op0 = op1, op1 = tem;
tem = trueop0, trueop0 = trueop1, trueop1 = tem;
code = swap_condition (code);
}
/* For integer comparisons of A and B maybe we can simplify A - B and can
then simplify a comparison of that with zero. If A and B are both either
a register or a CONST_INT, this can't help; testing for these cases will
prevent infinite recursion here and speed things up.
If CODE is an unsigned comparison, then we can never do this optimization,
because it gives an incorrect result if the subtraction wraps around zero.
ANSI C defines unsigned operations such that they never overflow, and
thus such cases can not be ignored. */
if (INTEGRAL_MODE_P (mode) && trueop1 != const0_rtx
&& ! ((GET_CODE (op0) == REG || GET_CODE (trueop0) == CONST_INT)
&& (GET_CODE (op1) == REG || GET_CODE (trueop1) == CONST_INT))
&& 0 != (tem = simplify_binary_operation (MINUS, mode, op0, op1))
/* We cannot do this for == or != if tem is a nonzero address. */
&& ((code != EQ && code != NE) || ! nonzero_address_p (tem))
&& code != GTU && code != GEU && code != LTU && code != LEU)
return simplify_relational_operation (signed_condition (code),
mode, tem, const0_rtx);
if (flag_unsafe_math_optimizations && code == ORDERED)
return const_true_rtx;
if (flag_unsafe_math_optimizations && code == UNORDERED)
return const0_rtx;
/* For modes without NaNs, if the two operands are equal, we know the
result except if they have side-effects. */
if (! HONOR_NANS (GET_MODE (trueop0))
&& rtx_equal_p (trueop0, trueop1)
&& ! side_effects_p (trueop0))
equal = 1, op0lt = 0, op0ltu = 0, op1lt = 0, op1ltu = 0;
/* If the operands are floating-point constants, see if we can fold
the result. */
else if (GET_CODE (trueop0) == CONST_DOUBLE
&& GET_CODE (trueop1) == CONST_DOUBLE
&& GET_MODE_CLASS (GET_MODE (trueop0)) == MODE_FLOAT)
{
REAL_VALUE_TYPE d0, d1;
REAL_VALUE_FROM_CONST_DOUBLE (d0, trueop0);
REAL_VALUE_FROM_CONST_DOUBLE (d1, trueop1);
/* Comparisons are unordered iff at least one of the values is NaN. */
if (REAL_VALUE_ISNAN (d0) || REAL_VALUE_ISNAN (d1))
switch (code)
{
case UNEQ:
case UNLT:
case UNGT:
case UNLE:
case UNGE:
case NE:
case UNORDERED:
return const_true_rtx;
case EQ:
case LT:
case GT:
case LE:
case GE:
case LTGT:
case ORDERED:
return const0_rtx;
default:
return 0;
}
equal = REAL_VALUES_EQUAL (d0, d1);
op0lt = op0ltu = REAL_VALUES_LESS (d0, d1);
op1lt = op1ltu = REAL_VALUES_LESS (d1, d0);
}
/* Otherwise, see if the operands are both integers. */
else if ((GET_MODE_CLASS (mode) == MODE_INT || mode == VOIDmode)
&& (GET_CODE (trueop0) == CONST_DOUBLE
|| GET_CODE (trueop0) == CONST_INT)
&& (GET_CODE (trueop1) == CONST_DOUBLE
|| GET_CODE (trueop1) == CONST_INT))
{
int width = GET_MODE_BITSIZE (mode);
HOST_WIDE_INT l0s, h0s, l1s, h1s;
unsigned HOST_WIDE_INT l0u, h0u, l1u, h1u;
/* Get the two words comprising each integer constant. */
if (GET_CODE (trueop0) == CONST_DOUBLE)
{
l0u = l0s = CONST_DOUBLE_LOW (trueop0);
h0u = h0s = CONST_DOUBLE_HIGH (trueop0);
}
else
{
l0u = l0s = INTVAL (trueop0);
h0u = h0s = HWI_SIGN_EXTEND (l0s);
}
if (GET_CODE (trueop1) == CONST_DOUBLE)
{
l1u = l1s = CONST_DOUBLE_LOW (trueop1);
h1u = h1s = CONST_DOUBLE_HIGH (trueop1);
}
else
{
l1u = l1s = INTVAL (trueop1);
h1u = h1s = HWI_SIGN_EXTEND (l1s);
}
/* If WIDTH is nonzero and smaller than HOST_BITS_PER_WIDE_INT,
we have to sign or zero-extend the values. */
if (width != 0 && width < HOST_BITS_PER_WIDE_INT)
{
l0u &= ((HOST_WIDE_INT) 1 << width) - 1;
l1u &= ((HOST_WIDE_INT) 1 << width) - 1;
if (l0s & ((HOST_WIDE_INT) 1 << (width - 1)))
l0s |= ((HOST_WIDE_INT) (-1) << width);
if (l1s & ((HOST_WIDE_INT) 1 << (width - 1)))
l1s |= ((HOST_WIDE_INT) (-1) << width);
}
if (width != 0 && width <= HOST_BITS_PER_WIDE_INT)
h0u = h1u = 0, h0s = HWI_SIGN_EXTEND (l0s), h1s = HWI_SIGN_EXTEND (l1s);
equal = (h0u == h1u && l0u == l1u);
op0lt = (h0s < h1s || (h0s == h1s && l0u < l1u));
op1lt = (h1s < h0s || (h1s == h0s && l1u < l0u));
op0ltu = (h0u < h1u || (h0u == h1u && l0u < l1u));
op1ltu = (h1u < h0u || (h1u == h0u && l1u < l0u));
}
/* Otherwise, there are some code-specific tests we can make. */
else
{
switch (code)
{
case EQ:
if (trueop1 == const0_rtx && nonzero_address_p (op0))
return const0_rtx;
break;
case NE:
if (trueop1 == const0_rtx && nonzero_address_p (op0))
return const_true_rtx;
break;
case GEU:
/* Unsigned values are never negative. */
if (trueop1 == const0_rtx)
return const_true_rtx;
break;
case LTU:
if (trueop1 == const0_rtx)
return const0_rtx;
break;
case LEU:
/* Unsigned values are never greater than the largest
unsigned value. */
if (GET_CODE (trueop1) == CONST_INT
&& (unsigned HOST_WIDE_INT) INTVAL (trueop1) == GET_MODE_MASK (mode)
&& INTEGRAL_MODE_P (mode))
return const_true_rtx;
break;
case GTU:
if (GET_CODE (trueop1) == CONST_INT
&& (unsigned HOST_WIDE_INT) INTVAL (trueop1) == GET_MODE_MASK (mode)
&& INTEGRAL_MODE_P (mode))
return const0_rtx;
break;
case LT:
/* Optimize abs(x) < 0.0. */
if (trueop1 == CONST0_RTX (mode) && !HONOR_SNANS (mode))
{
tem = GET_CODE (trueop0) == FLOAT_EXTEND ? XEXP (trueop0, 0)
: trueop0;
if (GET_CODE (tem) == ABS)
return const0_rtx;
}
break;
case GE:
/* Optimize abs(x) >= 0.0. */
if (trueop1 == CONST0_RTX (mode) && !HONOR_NANS (mode))
{
tem = GET_CODE (trueop0) == FLOAT_EXTEND ? XEXP (trueop0, 0)
: trueop0;
if (GET_CODE (tem) == ABS)
return const_true_rtx;
}
break;
case UNGE:
/* Optimize ! (abs(x) < 0.0). */
if (trueop1 == CONST0_RTX (mode))
{
tem = GET_CODE (trueop0) == FLOAT_EXTEND ? XEXP (trueop0, 0)
: trueop0;
if (GET_CODE (tem) == ABS)
return const_true_rtx;
}
break;
default:
break;
}
return 0;
}
/* If we reach here, EQUAL, OP0LT, OP0LTU, OP1LT, and OP1LTU are set
as appropriate. */
switch (code)
{
case EQ:
case UNEQ:
return equal ? const_true_rtx : const0_rtx;
case NE:
case LTGT:
return ! equal ? const_true_rtx : const0_rtx;
case LT:
case UNLT:
return op0lt ? const_true_rtx : const0_rtx;
case GT:
case UNGT:
return op1lt ? const_true_rtx : const0_rtx;
case LTU:
return op0ltu ? const_true_rtx : const0_rtx;
case GTU:
return op1ltu ? const_true_rtx : const0_rtx;
case LE:
case UNLE:
return equal || op0lt ? const_true_rtx : const0_rtx;
case GE:
case UNGE:
return equal || op1lt ? const_true_rtx : const0_rtx;
case LEU:
return equal || op0ltu ? const_true_rtx : const0_rtx;
case GEU:
return equal || op1ltu ? const_true_rtx : const0_rtx;
case ORDERED:
return const_true_rtx;
case UNORDERED:
return const0_rtx;
default:
abort ();
}
}
/* Simplify CODE, an operation with result mode MODE and three operands,
OP0, OP1, and OP2. OP0_MODE was the mode of OP0 before it became
a constant. Return 0 if no simplifications is possible. */
rtx
simplify_ternary_operation (enum rtx_code code, enum machine_mode mode,
enum machine_mode op0_mode, rtx op0, rtx op1,
rtx op2)
{
unsigned int width = GET_MODE_BITSIZE (mode);
/* VOIDmode means "infinite" precision. */
if (width == 0)
width = HOST_BITS_PER_WIDE_INT;
switch (code)
{
case SIGN_EXTRACT:
case ZERO_EXTRACT:
if (GET_CODE (op0) == CONST_INT
&& GET_CODE (op1) == CONST_INT
&& GET_CODE (op2) == CONST_INT
&& ((unsigned) INTVAL (op1) + (unsigned) INTVAL (op2) <= width)
&& width <= (unsigned) HOST_BITS_PER_WIDE_INT)
{
/* Extracting a bit-field from a constant */
HOST_WIDE_INT val = INTVAL (op0);
if (BITS_BIG_ENDIAN)
val >>= (GET_MODE_BITSIZE (op0_mode)
- INTVAL (op2) - INTVAL (op1));
else
val >>= INTVAL (op2);
if (HOST_BITS_PER_WIDE_INT != INTVAL (op1))
{
/* First zero-extend. */
val &= ((HOST_WIDE_INT) 1 << INTVAL (op1)) - 1;
/* If desired, propagate sign bit. */
if (code == SIGN_EXTRACT
&& (val & ((HOST_WIDE_INT) 1 << (INTVAL (op1) - 1))))
val |= ~ (((HOST_WIDE_INT) 1 << INTVAL (op1)) - 1);
}
/* Clear the bits that don't belong in our mode,
unless they and our sign bit are all one.
So we get either a reasonable negative value or a reasonable
unsigned value for this mode. */
if (width < HOST_BITS_PER_WIDE_INT
&& ((val & ((HOST_WIDE_INT) (-1) << (width - 1)))
!= ((HOST_WIDE_INT) (-1) << (width - 1))))
val &= ((HOST_WIDE_INT) 1 << width) - 1;
return GEN_INT (val);
}
break;
case IF_THEN_ELSE:
if (GET_CODE (op0) == CONST_INT)
return op0 != const0_rtx ? op1 : op2;
/* Convert c ? a : a into "a". */
if (rtx_equal_p (op1, op2) && ! side_effects_p (op0))
return op1;
/* Convert a != b ? a : b into "a". */
if (GET_CODE (op0) == NE
&& ! side_effects_p (op0)
&& ! HONOR_NANS (mode)
&& ! HONOR_SIGNED_ZEROS (mode)
&& ((rtx_equal_p (XEXP (op0, 0), op1)
&& rtx_equal_p (XEXP (op0, 1), op2))
|| (rtx_equal_p (XEXP (op0, 0), op2)