# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
DIST_COMMON = $(top_srcdir)/fragment.am $(srcdir)/Makefile.in \
	$(srcdir)/Makefile.am
subdir = src
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../config/acx.m4 \
	$(top_srcdir)/../config/enable.m4 \
	$(top_srcdir)/../config/futex.m4 \
	$(top_srcdir)/../config/iconv.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/lib-ld.m4 \
	$(top_srcdir)/../config/lib-link.m4 \
	$(top_srcdir)/../config/lib-prefix.m4 \
	$(top_srcdir)/../config/lthostflags.m4 \
	$(top_srcdir)/../config/multi.m4 \
	$(top_srcdir)/../config/no-executables.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/stdint.m4 \
	$(top_srcdir)/../config/unwind_ipinfo.m4 \
	$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
	$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
	$(top_srcdir)/../lt~obsolete.m4 $(top_srcdir)/crossconfig.m4 \
	$(top_srcdir)/linkage.m4 $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/../config/gc++filt.m4 \
	$(top_srcdir)/../config/tls.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(toolexeclibdir)"
LTLIBRARIES = $(toolexeclib_LTLIBRARIES)
am__DEPENDENCIES_1 =
am__objects_1 = atomicity.lo codecvt_members.lo collate_members.lo \
	ctype_members.lo messages_members.lo monetary_members.lo \
	numeric_members.lo time_members.lo
@ENABLE_EXTERN_TEMPLATE_TRUE@am__objects_2 = allocator-inst.lo \
@ENABLE_EXTERN_TEMPLATE_TRUE@	concept-inst.lo ext-inst.lo \
@ENABLE_EXTERN_TEMPLATE_TRUE@	fstream-inst.lo ios-inst.lo \
@ENABLE_EXTERN_TEMPLATE_TRUE@	iostream-inst.lo istream-inst.lo \
@ENABLE_EXTERN_TEMPLATE_TRUE@	locale-inst.lo misc-inst.lo \
@ENABLE_EXTERN_TEMPLATE_TRUE@	ostream-inst.lo sstream-inst.lo \
@ENABLE_EXTERN_TEMPLATE_TRUE@	streambuf-inst.lo string-inst.lo \
@ENABLE_EXTERN_TEMPLATE_TRUE@	wlocale-inst.lo wstring-inst.lo
@GLIBCXX_LDBL_COMPAT_TRUE@am__objects_3 = compatibility-ldbl.lo
@ENABLE_PARALLEL_TRUE@am__objects_4 = parallel_settings.lo \
@ENABLE_PARALLEL_TRUE@	compatibility-parallel_list.lo \
@ENABLE_PARALLEL_TRUE@	compatibility-parallel_list-2.lo
am__objects_5 = basic_file.lo c++locale.lo $(am__objects_2) \
	$(am__objects_3) $(am__objects_4)
am__objects_6 = atomic.lo bitmap_allocator.lo pool_allocator.lo \
	mt_allocator.lo codecvt.lo compatibility.lo \
	compatibility-c++0x.lo compatibility-debug_list.lo \
	compatibility-debug_list-2.lo compatibility-list.lo \
	compatibility-list-2.lo complex_io.lo ctype.lo debug.lo \
	functexcept.lo functional.lo globals_io.lo hash_c++0x.lo \
	hash_tr1.lo hashtable_c++0x.lo hashtable_tr1.lo ios.lo \
	ios_failure.lo ios_init.lo ios_locale.lo limits.lo list.lo \
	locale.lo locale_init.lo locale_facets.lo localename.lo \
	math_stubs_float.lo math_stubs_long_double.lo stdexcept.lo \
	strstream.lo system_error.lo tree.lo istream.lo \
	placeholders.lo regex.lo shared_ptr.lo streambuf.lo mutex.lo \
	condition_variable.lo chrono.lo thread.lo future.lo \
	valarray.lo $(am__objects_1) $(am__objects_5)
am_libstdc___la_OBJECTS = $(am__objects_6)
libstdc___la_OBJECTS = $(am_libstdc___la_OBJECTS)
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp =
am__depfiles_maybe =
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
CXXLD = $(CXX)
SOURCES = $(libstdc___la_SOURCES)
ETAGS = etags
CTAGS = ctags
ABI_TWEAKS_SRCDIR = @ABI_TWEAKS_SRCDIR@
ACLOCAL = @ACLOCAL@
ALLOCATOR_H = @ALLOCATOR_H@
ALLOCATOR_NAME = @ALLOCATOR_NAME@
AMTAR = @AMTAR@
AR = @AR@
AS = @AS@
ATOMICITY_SRCDIR = @ATOMICITY_SRCDIR@
ATOMIC_FLAGS = @ATOMIC_FLAGS@
ATOMIC_WORD_SRCDIR = @ATOMIC_WORD_SRCDIR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BASIC_FILE_CC = @BASIC_FILE_CC@
BASIC_FILE_H = @BASIC_FILE_H@
CC = @CC@
CCODECVT_CC = @CCODECVT_CC@
CCOLLATE_CC = @CCOLLATE_CC@
CCTYPE_CC = @CCTYPE_CC@
CFLAGS = @CFLAGS@
CLOCALE_CC = @CLOCALE_CC@
CLOCALE_H = @CLOCALE_H@
CLOCALE_INTERNAL_H = @CLOCALE_INTERNAL_H@
CMESSAGES_CC = @CMESSAGES_CC@
CMESSAGES_H = @CMESSAGES_H@
CMONEY_CC = @CMONEY_CC@
CNUMERIC_CC = @CNUMERIC_CC@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CPU_DEFINES_SRCDIR = @CPU_DEFINES_SRCDIR@
CSTDIO_H = @CSTDIO_H@
CTIME_CC = @CTIME_CC@
CTIME_H = @CTIME_H@
CXX = @CXX@
CXXCPP = @CXXCPP@
CXXFILT = @CXXFILT@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
C_INCLUDE_DIR = @C_INCLUDE_DIR@
DBLATEX = @DBLATEX@
DBTOEPUB = @DBTOEPUB@
DEBUG_FLAGS = @DEBUG_FLAGS@
DEFS = @DEFS@
DOT = @DOT@
DOXYGEN = @DOXYGEN@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ERROR_CONSTANTS_SRCDIR = @ERROR_CONSTANTS_SRCDIR@
EXEEXT = @EXEEXT@
EXTRA_CXX_FLAGS = @EXTRA_CXX_FLAGS@
FGREP = @FGREP@
GLIBCXX_INCLUDES = @GLIBCXX_INCLUDES@
GLIBCXX_LIBS = @GLIBCXX_LIBS@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBICONV = @LIBICONV@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBSUPCXX_PICFLAGS = @LIBSUPCXX_PICFLAGS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBICONV = @LTLIBICONV@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OPTIMIZE_CXXFLAGS = @OPTIMIZE_CXXFLAGS@
OPT_LDFLAGS = @OPT_LDFLAGS@
OS_INC_SRCDIR = @OS_INC_SRCDIR@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PDFLATEX = @PDFLATEX@
RANLIB = @RANLIB@
RUBY = @RUBY@
SECTION_FLAGS = @SECTION_FLAGS@
SECTION_LDFLAGS = @SECTION_LDFLAGS@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
SYMVER_FILE = @SYMVER_FILE@
TOPLEVEL_INCLUDES = @TOPLEVEL_INCLUDES@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_FLAGS = @WARN_FLAGS@
WERROR = @WERROR@
XMLLINT = @XMLLINT@
XSLTPROC = @XSLTPROC@
XSL_STYLE_DIR = @XSL_STYLE_DIR@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
baseline_dir = @baseline_dir@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
check_msgfmt = @check_msgfmt@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
enable_shared = @enable_shared@
enable_static = @enable_static@
exec_prefix = @exec_prefix@
glibcxx_MOFILES = @glibcxx_MOFILES@
glibcxx_PCHFLAGS = @glibcxx_PCHFLAGS@
glibcxx_POFILES = @glibcxx_POFILES@
glibcxx_builddir = @glibcxx_builddir@
glibcxx_localedir = @glibcxx_localedir@
glibcxx_prefixdir = @glibcxx_prefixdir@
glibcxx_srcdir = @glibcxx_srcdir@
glibcxx_thread_h = @glibcxx_thread_h@
glibcxx_toolexecdir = @glibcxx_toolexecdir@
glibcxx_toolexeclibdir = @glibcxx_toolexeclibdir@
gxx_include_dir = @gxx_include_dir@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
libtool_VERSION = @libtool_VERSION@
localedir = @localedir@
localstatedir = @localstatedir@
lt_host_flags = @lt_host_flags@
mandir = @mandir@
mkdir_p = @mkdir_p@
multi_basedir = @multi_basedir@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
port_specific_symbol_files = @port_specific_symbol_files@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
toplevel_srcdir = @toplevel_srcdir@

# May be used by various substitution variables.
gcc_version := $(shell cat $(top_srcdir)/../gcc/BASE-VER)
MAINT_CHARSET = latin1
mkinstalldirs = $(SHELL) $(toplevel_srcdir)/mkinstalldirs
PWD_COMMAND = $${PWDCMD-pwd}
STAMP = echo timestamp >
toolexecdir = $(glibcxx_toolexecdir)
toolexeclibdir = $(glibcxx_toolexeclibdir)

# These bits are all figured out from configure.  Look in acinclude.m4
# or configure.ac to see how they are set.  See GLIBCXX_EXPORT_FLAGS.
CONFIG_CXXFLAGS = \
	$(SECTION_FLAGS) $(EXTRA_CXX_FLAGS)

WARN_CXXFLAGS = \
	$(WARN_FLAGS) $(WERROR) -fdiagnostics-show-location=once


# -I/-D flags to pass when compiling.
AM_CPPFLAGS = $(GLIBCXX_INCLUDES)

# Cross compiler support.
toolexeclib_LTLIBRARIES = libstdc++.la
@ENABLE_SYMVERS_TRUE@CLEANFILES = libstdc++-symbols.ver $(version_dep)
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,-exported_symbols_list,libstdc++-symbols.explist
@ENABLE_SYMVERS_FALSE@version_arg = 
@ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,--version-script=libstdc++-symbols.ver
@ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_SOL2_FALSE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,--version-script=libstdc++-symbols.ver
@ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_SOL2_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,--version-script,libstdc++-symbols.ver-sol2
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@version_arg = -Wl,-M,libstdc++-symbols.ver-sun
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.explist
@ENABLE_SYMVERS_FALSE@version_dep = 
@ENABLE_SYMVERS_GNU_NAMESPACE_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver
@ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_SOL2_FALSE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver
@ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_SOL2_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver-sol2
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@version_dep = libstdc++-symbols.ver-sun

# Source files linked in via configuration/make substitution for a
# particular host.
host_sources = \
	atomicity.cc \
	codecvt_members.cc \
	collate_members.cc \
	ctype_members.cc \
	messages_members.cc \
	monetary_members.cc \
	numeric_members.cc \
	time_members.cc

atomicity_file = ${glibcxx_srcdir}/$(ATOMICITY_SRCDIR)/atomicity.h

# Source files linked in via configuration/make substitution for a
# particular host, but with ad hoc naming rules.
host_sources_extra = \
	basic_file.cc c++locale.cc \
	${inst_sources} ${ldbl_compat_sources} ${parallel_sources}

@ENABLE_PARALLEL_FALSE@parallel_sources = 
@ENABLE_PARALLEL_TRUE@parallel_sources = parallel_settings.cc \
@ENABLE_PARALLEL_TRUE@		   compatibility-parallel_list.cc \
@ENABLE_PARALLEL_TRUE@		   compatibility-parallel_list-2.cc

@GLIBCXX_LDBL_COMPAT_FALSE@ldbl_compat_sources = 
@GLIBCXX_LDBL_COMPAT_TRUE@ldbl_compat_sources = compatibility-ldbl.cc
@ENABLE_EXTERN_TEMPLATE_FALSE@XTEMPLATE_FLAGS = 
@ENABLE_EXTERN_TEMPLATE_TRUE@XTEMPLATE_FLAGS = -fno-implicit-templates
@ENABLE_EXTERN_TEMPLATE_FALSE@inst_sources = 
@ENABLE_EXTERN_TEMPLATE_TRUE@inst_sources = \
@ENABLE_EXTERN_TEMPLATE_TRUE@	allocator-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	concept-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	ext-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	fstream-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	ios-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	iostream-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	istream-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	locale-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	misc-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	ostream-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	sstream-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	streambuf-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	string-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	wlocale-inst.cc \
@ENABLE_EXTERN_TEMPLATE_TRUE@	wstring-inst.cc


# Sources present in the src directory, always present.
sources = \
	atomic.cc \
	bitmap_allocator.cc \
	pool_allocator.cc \
	mt_allocator.cc \
	codecvt.cc \
	compatibility.cc \
	compatibility-c++0x.cc \
	compatibility-debug_list.cc \
	compatibility-debug_list-2.cc \
	compatibility-list.cc \
	compatibility-list-2.cc \
	complex_io.cc \
	ctype.cc \
	debug.cc \
	functexcept.cc \
	functional.cc \
	globals_io.cc \
	hash_c++0x.cc \
	hash_tr1.cc \
	hashtable_c++0x.cc \
	hashtable_tr1.cc \
	ios.cc \
	ios_failure.cc \
	ios_init.cc \
	ios_locale.cc \
	limits.cc \
	list.cc \
	locale.cc \
	locale_init.cc \
	locale_facets.cc \
	localename.cc \
	math_stubs_float.cc \
	math_stubs_long_double.cc \
	stdexcept.cc \
	strstream.cc \
	system_error.cc \
	tree.cc \
	istream.cc \
	placeholders.cc \
	regex.cc \
	shared_ptr.cc \
	streambuf.cc \
	mutex.cc \
	condition_variable.cc \
	chrono.cc \
	thread.cc \
	future.cc \
	valarray.cc \
	${host_sources} \
	${host_sources_extra}

libstdc___la_SOURCES = $(sources)
libstdc___la_LIBADD = \
	$(GLIBCXX_LIBS) \
	$(top_builddir)/libsupc++/libsupc++convenience.la

libstdc___la_DEPENDENCIES = \
	${version_dep} \
	$(top_builddir)/libsupc++/libsupc++convenience.la

libstdc___la_LDFLAGS = \
	-version-info $(libtool_VERSION) ${version_arg} -lm

libstdc___la_LINK = $(CXXLINK) $(libstdc___la_LDFLAGS)

# Use special rules for the deprecated source files so that they find
# deprecated include files.
GLIBCXX_INCLUDE_DIR = $(glibcxx_builddir)/include

# Use special rules for parallel mode compilation.
PARALLEL_FLAGS = -fopenmp -D_GLIBCXX_PARALLEL -I$(glibcxx_builddir)/../libgomp

# AM_CXXFLAGS needs to be in each subdirectory so that it can be
# modified in a per-library or per-sub-library way.  Need to manually
# set this option because CONFIG_CXXFLAGS has to be after
# OPTIMIZE_CXXFLAGS on the compile line so that -O2 can be overridden
# as the occasion calls for it.
AM_CXXFLAGS = \
	$(XTEMPLATE_FLAGS) \
	$(WARN_CXXFLAGS) \
	$(OPTIMIZE_CXXFLAGS) \
	$(CONFIG_CXXFLAGS)


# libstdc++ libtool notes

# 1) Need to explicitly set LTCXXCOMPILE so that AM_CXXFLAGS is
# last. (That way, things like -O2 passed down from the toplevel can
# be overridden by --enable-debug.)

# 2) In general, libtool expects an argument such as `--tag=CXX' when
# using the C++ compiler, because that will enable the settings
# detected when C++ support was being configured.  However, when no
# such flag is given in the command line, libtool attempts to figure
# it out by matching the compiler name in each configuration section
# against a prefix of the command line.  The problem is that, if the
# compiler name and its initial flags stored in the libtool
# configuration file don't match those in the command line, libtool
# can't decide which configuration to use, and it gives up.  The
# correct solution is to add `--tag CXX' to LTCXXCOMPILE and maybe
# CXXLINK, just after $(LIBTOOL), so that libtool doesn't have to
# attempt to infer which configuration to use
LTCXXCOMPILE = $(LIBTOOL) --tag CXX \
	       $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=compile \
	       $(CXX) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \
	       $(AM_CXXFLAGS) $(CXXFLAGS)

LTLDFLAGS = $(shell $(SHELL) $(top_srcdir)/../libtool-ldflags $(LDFLAGS))

# 3) We'd have a problem when building the shared libstdc++ object if
# the rules automake generates would be used.  We cannot allow g++ to
# be used since this would add -lstdc++ to the link line which of
# course is problematic at this point.  So, we get the top-level
# directory to configure libstdc++-v3 to use gcc as the C++
# compilation driver.
CXXLINK = $(LIBTOOL) --tag CXX $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=link \
	  $(CXX) $(OPT_LDFLAGS) $(SECTION_LDFLAGS) $(AM_CXXFLAGS) $(LTLDFLAGS) -o $@

debugdir = debug
all: all-am

.SUFFIXES:
.SUFFIXES: .cc .lo .o .obj
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/fragment.am $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign --ignore-deps src/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign --ignore-deps src/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-toolexeclibLTLIBRARIES: $(toolexeclib_LTLIBRARIES)
	@$(NORMAL_INSTALL)
	test -z "$(toolexeclibdir)" || $(MKDIR_P) "$(DESTDIR)$(toolexeclibdir)"
	@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
	list2=; for p in $$list; do \
	  if test -f $$p; then \
	    list2="$$list2 $$p"; \
	  else :; fi; \
	done; \
	test -z "$$list2" || { \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(toolexeclibdir)'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(toolexeclibdir)"; \
	}

uninstall-toolexeclibLTLIBRARIES:
	@$(NORMAL_UNINSTALL)
	@list='$(toolexeclib_LTLIBRARIES)'; test -n "$(toolexeclibdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(toolexeclibdir)/$$f'"; \
	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(toolexeclibdir)/$$f"; \
	done

clean-toolexeclibLTLIBRARIES:
	-test -z "$(toolexeclib_LTLIBRARIES)" || rm -f $(toolexeclib_LTLIBRARIES)
	@list='$(toolexeclib_LTLIBRARIES)'; for p in $$list; do \
	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
	  test "$$dir" != "$$p" || dir=.; \
	  echo "rm -f \"$${dir}/so_locations\""; \
	  rm -f "$${dir}/so_locations"; \
	done
libstdc++.la: $(libstdc___la_OBJECTS) $(libstdc___la_DEPENDENCIES) 
	$(libstdc___la_LINK) -rpath $(toolexeclibdir) $(libstdc___la_OBJECTS) $(libstdc___la_LIBADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

.cc.o:
	$(CXXCOMPILE) -c -o $@ $<

.cc.obj:
	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`

.cc.lo:
	$(LTCXXCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
check-am: all-am
check: check-am
all-am: Makefile $(LTLIBRARIES) all-local
installdirs:
	for dir in "$(DESTDIR)$(toolexeclibdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-toolexeclibLTLIBRARIES \
	mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-tags

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am: install-data-local

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am: install-toolexeclibLTLIBRARIES

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-toolexeclibLTLIBRARIES

.MAKE: install-am install-strip

.PHONY: CTAGS GTAGS all all-am all-local check check-am clean \
	clean-generic clean-libtool clean-toolexeclibLTLIBRARIES ctags \
	distclean distclean-compile distclean-generic \
	distclean-libtool distclean-tags dvi dvi-am html html-am info \
	info-am install install-am install-data install-data-am \
	install-data-local install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip \
	install-toolexeclibLTLIBRARIES installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags uninstall \
	uninstall-am uninstall-toolexeclibLTLIBRARIES


# Symbol versioning for shared libraries.
@ENABLE_SYMVERS_TRUE@libstdc++-symbols.ver:  ${glibcxx_srcdir}/$(SYMVER_FILE) \
@ENABLE_SYMVERS_TRUE@		$(port_specific_symbol_files)
@ENABLE_SYMVERS_TRUE@	cp ${glibcxx_srcdir}/$(SYMVER_FILE) ./libstdc++-symbols.ver
@ENABLE_SYMVERS_TRUE@	chmod +w ./libstdc++-symbols.ver
@ENABLE_SYMVERS_TRUE@	if test "x$(port_specific_symbol_files)" != x; then \
@ENABLE_SYMVERS_TRUE@	  if grep '^# Appended to version file.' \
@ENABLE_SYMVERS_TRUE@	       $(port_specific_symbol_files) /dev/null > /dev/null 2>&1; then \
@ENABLE_SYMVERS_TRUE@	    cat $(port_specific_symbol_files) >> $@; \
@ENABLE_SYMVERS_TRUE@	  else \
@ENABLE_SYMVERS_TRUE@	    sed -n '1,/DO NOT DELETE/p' $@ > tmp.top; \
@ENABLE_SYMVERS_TRUE@	    sed -n '/DO NOT DELETE/,$$p' $@ > tmp.bottom; \
@ENABLE_SYMVERS_TRUE@	    cat tmp.top $(port_specific_symbol_files) tmp.bottom > $@; \
@ENABLE_SYMVERS_TRUE@	    rm tmp.top tmp.bottom; \
@ENABLE_SYMVERS_TRUE@	  fi; \
@ENABLE_SYMVERS_TRUE@	fi
@ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_SOL2_TRUE@@ENABLE_SYMVERS_TRUE@libstdc++-symbols.ver-sol2 : libstdc++-symbols.ver
@ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_SOL2_TRUE@@ENABLE_SYMVERS_TRUE@	sed -e '/^#ifdef HAVE_SYMVER_SYMBOL_RENAMING_RUNTIME_SUPPORT/,/^#endif/d' $< \
@ENABLE_SYMVERS_GNU_TRUE@@ENABLE_SYMVERS_SOL2_TRUE@@ENABLE_SYMVERS_TRUE@	 > $@ || (rm -f $@ ; exit 1)
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@libstdc++-symbols.ver-sun : libstdc++-symbols.ver \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@		$(toplevel_srcdir)/contrib/make_sunver.pl \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@		$(libstdc___la_OBJECTS) $(libstdc___la_LIBADD)
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@	CXXFILT="$(CXXFILT)"; export CXXFILT; \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@	perl $(toplevel_srcdir)/contrib/make_sunver.pl \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@	  libstdc++-symbols.ver \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@	  $(libstdc___la_OBJECTS:%.lo=.libs/%.o) \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@	 `echo $(libstdc___la_LIBADD) | \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@	    sed 's,/\([^/.]*\)\.la,/.libs/\1.a,g'` \
@ENABLE_SYMVERS_SUN_TRUE@@ENABLE_SYMVERS_TRUE@	 > $@ || (rm -f $@ ; exit 1)
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@libstdc++-symbols.explist : libstdc++-symbols.ver \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@		${glibcxx_srcdir}/scripts/make_exports.pl \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@		$(libstdc___la_OBJECTS) $(libstdc___la_LIBADD)
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@	perl ${glibcxx_srcdir}/scripts/make_exports.pl \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@	  libstdc++-symbols.ver \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@	  $(libstdc___la_OBJECTS:%.lo=.libs/%.o) \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@	 `echo $(libstdc___la_LIBADD) | \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@	    sed 's,/\([^/.]*\)\.la,/.libs/\1.a,g'` \
@ENABLE_SYMVERS_DARWIN_TRUE@@ENABLE_SYMVERS_TRUE@	 > $@ || (rm -f $@ ; exit 1)

codecvt_members.cc: ${glibcxx_srcdir}/$(CCODECVT_CC)
	$(LN_S) ${glibcxx_srcdir}/$(CCODECVT_CC) . || true

collate_members.cc: ${glibcxx_srcdir}/$(CCOLLATE_CC)
	$(LN_S) ${glibcxx_srcdir}/$(CCOLLATE_CC) . || true

ctype_members.cc: ${glibcxx_srcdir}/$(CCTYPE_CC)
	$(LN_S) ${glibcxx_srcdir}/$(CCTYPE_CC) . || true

messages_members.cc: ${glibcxx_srcdir}/$(CMESSAGES_CC)
	$(LN_S) ${glibcxx_srcdir}/$(CMESSAGES_CC) . || true

monetary_members.cc: ${glibcxx_srcdir}/$(CMONEY_CC)
	$(LN_S) ${glibcxx_srcdir}/$(CMONEY_CC) . || true

numeric_members.cc: ${glibcxx_srcdir}/$(CNUMERIC_CC)
	$(LN_S) ${glibcxx_srcdir}/$(CNUMERIC_CC) . || true

time_members.cc: ${glibcxx_srcdir}/$(CTIME_CC)
	$(LN_S) ${glibcxx_srcdir}/$(CTIME_CC) . || true
atomicity.cc: ${atomicity_file}
	$(LN_S) ${atomicity_file} ./atomicity.cc || true

c++locale.cc: ${glibcxx_srcdir}/$(CLOCALE_CC)
	$(LN_S) ${glibcxx_srcdir}/$(CLOCALE_CC) ./$@ || true

basic_file.cc: ${glibcxx_srcdir}/$(BASIC_FILE_CC)
	$(LN_S) ${glibcxx_srcdir}/$(BASIC_FILE_CC) ./$@ || true

vpath % $(top_srcdir)/src
vpath % $(top_srcdir)
strstream.lo: strstream.cc
	$(LTCXXCOMPILE) -I$(GLIBCXX_INCLUDE_DIR)/backward -Wno-deprecated -c $<
strstream.o: strstream.cc
	$(CXXCOMPILE) -I$(GLIBCXX_INCLUDE_DIR)/backward -Wno-deprecated -c $<

# Use special rules for the concept-checking instantiations so that all
# the generated template functions are also instantiated.  Force the checks
# to be on so that the instantiations are actually seen.
concept-inst.lo: concept-inst.cc
	$(LTCXXCOMPILE) -D_GLIBCXX_CONCEPT_CHECKS -fimplicit-templates -c $<
concept-inst.o: concept-inst.cc
	$(CXXCOMPILE) -D_GLIBCXX_CONCEPT_CHECKS -fimplicit-templates -c $<
parallel_settings.lo: parallel_settings.cc
	$(LTCXXCOMPILE) $(PARALLEL_FLAGS) -c $<
parallel_settings.o: parallel_settings.cc
	$(CXXCOMPILE) $(PARALLEL_FLAGS) -c $<

compatibility-parallel_list.lo: compatibility-parallel_list.cc
	$(LTCXXCOMPILE) -c $<
compatibility-parallel_list.o: compatibility-parallel_list.cc
	$(CXXCOMPILE) -c $<

compatibility-parallel_list-2.lo: compatibility-parallel_list-2.cc
	$(LTCXXCOMPILE) -c $<
compatibility-parallel_list-2.o: compatibility-parallel_list-2.cc
	$(CXXCOMPILE) -c $<

# Use special rules for the C++0x sources so that the proper flags are passed.
functexcept.lo: functexcept.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
functexcept.o: functexcept.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

shared_ptr.lo: shared_ptr.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
shared_ptr.o: shared_ptr.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

system_error.lo: system_error.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
system_error.o: system_error.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

mutex.lo: mutex.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
mutex.o: mutex.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

condition_variable.lo: condition_variable.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
condition_variable.o: condition_variable.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

compatibility-c++0x.lo: compatibility-c++0x.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
compatibility-c++0x.o: compatibility-c++0x.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

functional.lo: functional.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
functional.o: functional.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

hash_c++0x.lo: hash_c++0x.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
hash_c++0x.o: hash_c++0x.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

hashtable_c++0x.lo: hashtable_c++0x.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
hashtable_c++0x.o: hashtable_c++0x.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

limits.lo: limits.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
limits.o: limits.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

atomic.lo: atomic.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
atomic.o: atomic.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

fstream-inst.lo: fstream-inst.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
fstream-inst.o: fstream-inst.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

string-inst.lo: string-inst.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
string-inst.o: string-inst.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

wstring-inst.lo: wstring-inst.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
wstring-inst.o: wstring-inst.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

chrono.lo: chrono.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
chrono.o: chrono.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

thread.lo: thread.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
thread.o: thread.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

future.lo: future.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
future.o: future.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

regex.lo: regex.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
regex.o: regex.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

debug.lo: debug.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
debug.o: debug.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

placeholders.lo: placeholders.cc
	$(LTCXXCOMPILE) -std=gnu++0x -c $<
placeholders.o: placeholders.cc
	$(CXXCOMPILE) -std=gnu++0x -c $<

# Use special rules for compatibility-ldbl.cc compilation, as we need to
# pass -mlong-double-64.
@GLIBCXX_LDBL_COMPAT_TRUE@compatibility-ldbl.lo: compatibility-ldbl.cc
@GLIBCXX_LDBL_COMPAT_TRUE@	$(LTCXXCOMPILE) -mlong-double-64 -c $<
@GLIBCXX_LDBL_COMPAT_TRUE@compatibility-ldbl.o: compatibility-ldbl.cc
@GLIBCXX_LDBL_COMPAT_TRUE@	$(CXXCOMPILE) -mlong-double-64 -c $<

# Added bits to build debug library.
@GLIBCXX_BUILD_DEBUG_TRUE@all-local: build_debug
@GLIBCXX_BUILD_DEBUG_TRUE@install-data-local: install_debug
@GLIBCXX_BUILD_DEBUG_FALSE@all-local:
@GLIBCXX_BUILD_DEBUG_FALSE@install-data-local:

# Build a set of debug objects here.
# Take care to fix all possibly-relative paths.
stamp-debug:
	if test ! -d ${debugdir}; then \
	  mkdir -p ${debugdir}; \
	  (cd ${debugdir}; \
	  sed -e 's/top_builddir = \.\./top_builddir = ..\/../' \
	      -e 's/top_build_prefix = \.\./top_build_prefix = ..\/../' \
	      -e 's/srcdir = \.\./srcdir = ..\/../' \
	      -e 's/VPATH = \.\./VPATH = ..\/../' \
	      -e 's/glibcxx_basedir = \.\./glibcxx_basedir = ..\/../' \
	      -e 's/MKDIR_P = \.\./MKDIR_P = ..\/../' \
	      -e 's/all-local: build_debug/all-local:/' \
	      -e 's/install-data-local: install_debug/install-data-local:/' \
	  < ../Makefile > Makefile) ; \
	fi; \
	echo `date` > stamp-debug;

build_debug: stamp-debug
	(cd ${debugdir} && $(MAKE) CXXFLAGS='$(DEBUG_FLAGS)' all)

# Install debug library here.
install_debug:
	(cd ${debugdir} && $(MAKE) \
	toolexeclibdir=$(glibcxx_toolexeclibdir)/debug install)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: