/* Perform various loop optimizations, including strength reduction.
   Copyright (C) 1987, 1988, 1989, 1991, 1992, 1993, 1994, 1995,
   1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
   Free Software Foundation, Inc.

This file is part of GCC.

GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2, or (at your option) any later
version.

GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
for more details.

You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING.  If not, write to the Free
Software Foundation, 59 Temple Place - Suite 330, Boston, MA
02111-1307, USA.  */

/* This is the loop optimization pass of the compiler.
   It finds invariant computations within loops and moves them
   to the beginning of the loop.  Then it identifies basic and
   general induction variables.

   Basic induction variables (BIVs) are a pseudo registers which are set within
   a loop only by incrementing or decrementing its value.  General induction
   variables (GIVs) are pseudo registers with a value which is a linear function
   of a basic induction variable.  BIVs are recognized by `basic_induction_var';
   GIVs by `general_induction_var'.

   Once induction variables are identified, strength reduction is applied to the
   general induction variables, and induction variable elimination is applied to
   the basic induction variables.

   It also finds cases where
   a register is set within the loop by zero-extending a narrower value
   and changes these to zero the entire register once before the loop
   and merely copy the low part within the loop.

   Most of the complexity is in heuristics to decide when it is worth
   while to do these things.  */

#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
#include "rtl.h"
#include "tm_p.h"
#include "function.h"
#include "expr.h"
#include "hard-reg-set.h"
#include "basic-block.h"
#include "insn-config.h"
#include "regs.h"
#include "recog.h"
#include "flags.h"
#include "real.h"
#include "cselib.h"
#include "except.h"
#include "toplev.h"
#include "predict.h"
#include "insn-flags.h"
#include "optabs.h"
#include "cfgloop.h"
#include "ggc.h"

/* Get the loop info pointer of a loop.  */
#define LOOP_INFO(LOOP) ((struct loop_info *) (LOOP)->aux)

/* Get a pointer to the loop movables structure.  */
#define LOOP_MOVABLES(LOOP) (&LOOP_INFO (LOOP)->movables)

/* Get a pointer to the loop registers structure.  */
#define LOOP_REGS(LOOP) (&LOOP_INFO (LOOP)->regs)

/* Get a pointer to the loop induction variables structure.  */
#define LOOP_IVS(LOOP) (&LOOP_INFO (LOOP)->ivs)

/* Get the luid of an insn.  Catch the error of trying to reference the LUID
   of an insn added during loop, since these don't have LUIDs.  */

#define INSN_LUID(INSN)			\
  (INSN_UID (INSN) < max_uid_for_loop ? uid_luid[INSN_UID (INSN)] \
   : (abort (), -1))

#define REGNO_FIRST_LUID(REGNO)			\
  (REGNO_FIRST_UID (REGNO) < max_uid_for_loop	\
	? uid_luid[REGNO_FIRST_UID (REGNO)]	\
	: 0)
#define REGNO_LAST_LUID(REGNO)			\
  (REGNO_LAST_UID (REGNO) < max_uid_for_loop	\
	? uid_luid[REGNO_LAST_UID (REGNO)]	\
	: INT_MAX)

/* A "basic induction variable" or biv is a pseudo reg that is set
   (within this loop) only by incrementing or decrementing it.  */
/* A "general induction variable" or giv is a pseudo reg whose
   value is a linear function of a biv.  */

/* Bivs are recognized by `basic_induction_var';
   Givs by `general_induction_var'.  */

/* An enum for the two different types of givs, those that are used
   as memory addresses and those that are calculated into registers.  */
enum g_types
{
  DEST_ADDR,
  DEST_REG
};


/* A `struct induction' is created for every instruction that sets
   an induction variable (either a biv or a giv).  */

struct induction
{
  rtx insn;			/* The insn that sets a biv or giv */
  rtx new_reg;			/* New register, containing strength reduced
				   version of this giv.  */
  rtx src_reg;			/* Biv from which this giv is computed.
				   (If this is a biv, then this is the biv.) */
  enum g_types giv_type;	/* Indicate whether DEST_ADDR or DEST_REG */
  rtx dest_reg;			/* Destination register for insn: this is the
				   register which was the biv or giv.
				   For a biv, this equals src_reg.
				   For a DEST_ADDR type giv, this is 0.  */
  rtx *location;		/* Place in the insn where this giv occurs.
				   If GIV_TYPE is DEST_REG, this is 0.  */
				/* For a biv, this is the place where add_val
				   was found.  */
  enum machine_mode mode;	/* The mode of this biv or giv */
  rtx mem;			/* For DEST_ADDR, the memory object.  */
  rtx mult_val;			/* Multiplicative factor for src_reg.  */
  rtx add_val;			/* Additive constant for that product.  */
  int benefit;			/* Gain from eliminating this insn.  */
  rtx final_value;		/* If the giv is used outside the loop, and its
				   final value could be calculated, it is put
				   here, and the giv is made replaceable.  Set
				   the giv to this value before the loop.  */
  unsigned combined_with;	/* The number of givs this giv has been
				   combined with.  If nonzero, this giv
				   cannot combine with any other giv.  */
  unsigned replaceable : 1;	/* 1 if we can substitute the strength-reduced
				   variable for the original variable.
				   0 means they must be kept separate and the
				   new one must be copied into the old pseudo
				   reg each time the old one is set.  */
  unsigned not_replaceable : 1;	/* Used to prevent duplicating work.  This is
				   1 if we know that the giv definitely can
				   not be made replaceable, in which case we
				   don't bother checking the variable again
				   even if further info is available.
				   Both this and the above can be zero.  */
  unsigned ignore : 1;		/* 1 prohibits further processing of giv */
  unsigned always_computable : 1;/* 1 if this value is computable every
				    iteration.  */
  unsigned always_executed : 1; /* 1 if this set occurs each iteration.  */
  unsigned maybe_multiple : 1;	/* Only used for a biv and  1 if this biv
				   update may be done multiple times per
				   iteration.  */
  unsigned cant_derive : 1;	/* For giv's, 1 if this giv cannot derive
				   another giv.  This occurs in many cases
				   where a giv's lifetime spans an update to
				   a biv.  */
  unsigned maybe_dead : 1;	/* 1 if this giv might be dead.  In that case,
				   we won't use it to eliminate a biv, it
				   would probably lose.  */
  unsigned auto_inc_opt : 1;	/* 1 if this giv had its increment output next
				   to it to try to form an auto-inc address.  */
  unsigned shared : 1;
  unsigned no_const_addval : 1; /* 1 if add_val does not contain a const.  */
  int lifetime;			/* Length of life of this giv */
  rtx derive_adjustment;	/* If nonzero, is an adjustment to be
				   subtracted from add_val when this giv
				   derives another.  This occurs when the
				   giv spans a biv update by incrementation.  */
  rtx ext_dependent;		/* If nonzero, is a sign or zero extension
				   if a biv on which this giv is dependent.  */
  struct induction *next_iv;	/* For givs, links together all givs that are
				   based on the same biv.  For bivs, links
				   together all biv entries that refer to the
				   same biv register.  */
  struct induction *same;	/* For givs, if the giv has been combined with
				   another giv, this points to the base giv.
				   The base giv will have COMBINED_WITH nonzero.
				   For bivs, if the biv has the same LOCATION
				   than another biv, this points to the base
				   biv.  */
  struct induction *same_insn;	/* If there are multiple identical givs in
				   the same insn, then all but one have this
				   field set, and they all point to the giv
				   that doesn't have this field set.  */
  rtx last_use;			/* For a giv made from a biv increment, this is
				   a substitute for the lifetime information.  */
};


/* A `struct iv_class' is created for each biv.  */

struct iv_class
{
  unsigned int regno;		/* Pseudo reg which is the biv.  */
  int biv_count;		/* Number of insns setting this reg.  */
  struct induction *biv;	/* List of all insns that set this reg.  */
  int giv_count;		/* Number of DEST_REG givs computed from this
				   biv.  The resulting count is only used in
				   check_dbra_loop.  */
  struct induction *giv;	/* List of all insns that compute a giv
				   from this reg.  */
  int total_benefit;		/* Sum of BENEFITs of all those givs.  */
  rtx initial_value;		/* Value of reg at loop start.  */
  rtx initial_test;		/* Test performed on BIV before loop.  */
  rtx final_value;		/* Value of reg at loop end, if known.  */
  struct iv_class *next;	/* Links all class structures together.  */
  rtx init_insn;		/* insn which initializes biv, 0 if none.  */
  rtx init_set;			/* SET of INIT_INSN, if any.  */
  unsigned incremented : 1;	/* 1 if somewhere incremented/decremented */
  unsigned eliminable : 1;	/* 1 if plausible candidate for
                                   elimination.  */
  unsigned nonneg : 1;		/* 1 if we added a REG_NONNEG note for
                                   this.  */
  unsigned reversed : 1;	/* 1 if we reversed the loop that this
				   biv controls.  */
  unsigned all_reduced : 1;	/* 1 if all givs using this biv have
                                   been reduced.  */
};


/* Definitions used by the basic induction variable discovery code.  */
enum iv_mode
{
  UNKNOWN_INDUCT,
  BASIC_INDUCT,
  NOT_BASIC_INDUCT,
  GENERAL_INDUCT
};


/* A `struct iv' is created for every register.  */

struct iv
{
  enum iv_mode type;
  union
  {
    struct iv_class *class;
    struct induction *info;
  } iv;
};


#define REG_IV_TYPE(ivs, n) ivs->regs[n].type
#define REG_IV_INFO(ivs, n) ivs->regs[n].iv.info
#define REG_IV_CLASS(ivs, n) ivs->regs[n].iv.class


struct loop_ivs
{
  /* Indexed by register number, contains pointer to `struct
     iv' if register is an induction variable.  */
  struct iv *regs;

  /* Size of regs array.  */
  unsigned int n_regs;

  /* The head of a list which links together (via the next field)
     every iv class for the current loop.  */
  struct iv_class *list;
};


typedef struct loop_mem_info
{
  rtx mem;      /* The MEM itself.  */
  rtx reg;      /* Corresponding pseudo, if any.  */
  int optimize; /* Nonzero if we can optimize access to this MEM.  */
} loop_mem_info;


struct loop_reg
{
  /* Number of times the reg is set during the loop being scanned.
     During code motion, a negative value indicates a reg that has
     been made a candidate; in particular -2 means that it is an
     candidate that we know is equal to a constant and -1 means that
     it is a candidate not known equal to a constant.  After code
     motion, regs moved have 0 (which is accurate now) while the
     failed candidates have the original number of times set.

     Therefore, at all times, == 0 indicates an invariant register;
     < 0 a conditionally invariant one.  */
  int set_in_loop;

  /* Original value of set_in_loop; same except that this value
     is not set negative for a reg whose sets have been made candidates
     and not set to 0 for a reg that is moved.  */
  int n_times_set;

  /* Contains the insn in which a register was used if it was used
     exactly once; contains const0_rtx if it was used more than once.  */
  rtx single_usage;

  /* Nonzero indicates that the register cannot be moved or strength
     reduced.  */
  char may_not_optimize;

  /* Nonzero means reg N has already been moved out of one loop.
     This reduces the desire to move it out of another.  */
  char moved_once;
};


struct loop_regs
{
  int num;			/* Number of regs used in table.  */
  int size;			/* Size of table.  */
  struct loop_reg *array;	/* Register usage info. array.  */
  int multiple_uses;		/* Nonzero if a reg has multiple uses.  */
};


struct loop_movables
{
  /* Head of movable chain.  */
  struct movable *head;
  /* Last movable in chain.  */
  struct movable *last;
};


/* Information pertaining to a loop.  */

struct loop_info
{
  /* Nonzero if there is a subroutine call in the current loop.  */
  int has_call;
  /* Nonzero if there is a libcall in the current loop.  */
  int has_libcall;
  /* Nonzero if there is a non constant call in the current loop.  */
  int has_nonconst_call;
  /* Nonzero if there is a prefetch instruction in the current loop.  */
  int has_prefetch;
  /* Nonzero if there is a volatile memory reference in the current
     loop.  */
  int has_volatile;
  /* Nonzero if there is a tablejump in the current loop.  */
  int has_tablejump;
  /* Nonzero if there are ways to leave the loop other than falling
     off the end.  */
  int has_multiple_exit_targets;
  /* Nonzero if there is an indirect jump in the current function.  */
  int has_indirect_jump;
  /* Register or constant initial loop value.  */
  rtx initial_value;
  /* Register or constant value used for comparison test.  */
  rtx comparison_value;
  /* Register or constant approximate final value.  */
  rtx final_value;
  /* Register or constant initial loop value with term common to
     final_value removed.  */
  rtx initial_equiv_value;
  /* Register or constant final loop value with term common to
     initial_value removed.  */
  rtx final_equiv_value;
  /* Register corresponding to iteration variable.  */
  rtx iteration_var;
  /* Constant loop increment.  */
  rtx increment;
  enum rtx_code comparison_code;
  /* Holds the number of loop iterations.  It is zero if the number
     could not be calculated.  Must be unsigned since the number of
     iterations can be as high as 2^wordsize - 1.  For loops with a
     wider iterator, this number will be zero if the number of loop
     iterations is too large for an unsigned integer to hold.  */
  unsigned HOST_WIDE_INT n_iterations;
  int used_count_register;
  /* The loop iterator induction variable.  */
  struct iv_class *iv;
  /* List of MEMs that are stored in this loop.  */
  rtx store_mems;
  /* Array of MEMs that are used (read or written) in this loop, but
     cannot be aliased by anything in this loop, except perhaps
     themselves.  In other words, if mems[i] is altered during
     the loop, it is altered by an expression that is rtx_equal_p to
     it.  */
  loop_mem_info *mems;
  /* The index of the next available slot in MEMS.  */
  int mems_idx;
  /* The number of elements allocated in MEMS.  */
  int mems_allocated;
  /* Nonzero if we don't know what MEMs were changed in the current
     loop.  This happens if the loop contains a call (in which case
     `has_call' will also be set) or if we store into more than
     NUM_STORES MEMs.  */
  int unknown_address_altered;
  /* The above doesn't count any readonly memory locations that are
     stored.  This does.  */
  int unknown_constant_address_altered;
  /* Count of memory write instructions discovered in the loop.  */
  int num_mem_sets;
  /* The insn where the first of these was found.  */
  rtx first_loop_store_insn;
  /* The chain of movable insns in loop.  */
  struct loop_movables movables;
  /* The registers used the in loop.  */
  struct loop_regs regs;
  /* The induction variable information in loop.  */
  struct loop_ivs ivs;
  /* Nonzero if call is in pre_header extended basic block.  */
  int pre_header_has_call;
};

/* Not really meaningful values, but at least something.  */
#ifndef SIMULTANEOUS_PREFETCHES
#define SIMULTANEOUS_PREFETCHES 3
#endif
#ifndef PREFETCH_BLOCK
#define PREFETCH_BLOCK 32
#endif
#ifndef HAVE_prefetch
#define HAVE_prefetch 0
#define CODE_FOR_prefetch 0
#define gen_prefetch(a,b,c) (abort(), NULL_RTX)
#endif

/* Give up the prefetch optimizations once we exceed a given threshold.
   It is unlikely that we would be able to optimize something in a loop
   with so many detected prefetches.  */
#define MAX_PREFETCHES 100
/* The number of prefetch blocks that are beneficial to fetch at once before
   a loop with a known (and low) iteration count.  */
#define PREFETCH_BLOCKS_BEFORE_LOOP_MAX  6
/* For very tiny loops it is not worthwhile to prefetch even before the loop,
   since it is likely that the data are already in the cache.  */
#define PREFETCH_BLOCKS_BEFORE_LOOP_MIN  2

/* Parameterize some prefetch heuristics so they can be turned on and off
   easily for performance testing on new architectures.  These can be
   defined in target-dependent files.  */

/* Prefetch is worthwhile only when loads/stores are dense.  */
#ifndef PREFETCH_ONLY_DENSE_MEM
#define PREFETCH_ONLY_DENSE_MEM 1
#endif

/* Define what we mean by "dense" loads and stores; This value divided by 256
   is the minimum percentage of memory references that worth prefetching.  */
#ifndef PREFETCH_DENSE_MEM
#define PREFETCH_DENSE_MEM 220
#endif

/* Do not prefetch for a loop whose iteration count is known to be low.  */
#ifndef PREFETCH_NO_LOW_LOOPCNT
#define PREFETCH_NO_LOW_LOOPCNT 1
#endif

/* Define what we mean by a "low" iteration count.  */
#ifndef PREFETCH_LOW_LOOPCNT
#define PREFETCH_LOW_LOOPCNT 32
#endif

/* Do not prefetch for a loop that contains a function call; such a loop is
   probably not an internal loop.  */
#ifndef PREFETCH_NO_CALL
#define PREFETCH_NO_CALL 1
#endif

/* Do not prefetch accesses with an extreme stride.  */
#ifndef PREFETCH_NO_EXTREME_STRIDE
#define PREFETCH_NO_EXTREME_STRIDE 1
#endif

/* Define what we mean by an "extreme" stride.  */
#ifndef PREFETCH_EXTREME_STRIDE
#define PREFETCH_EXTREME_STRIDE 4096
#endif

/* Define a limit to how far apart indices can be and still be merged
   into a single prefetch.  */
#ifndef PREFETCH_EXTREME_DIFFERENCE
#define PREFETCH_EXTREME_DIFFERENCE 4096
#endif

/* Issue prefetch instructions before the loop to fetch data to be used
   in the first few loop iterations.  */
#ifndef PREFETCH_BEFORE_LOOP
#define PREFETCH_BEFORE_LOOP 1
#endif

/* Do not handle reversed order prefetches (negative stride).  */
#ifndef PREFETCH_NO_REVERSE_ORDER
#define PREFETCH_NO_REVERSE_ORDER 1
#endif

/* Prefetch even if the GIV is in conditional code.  */
#ifndef PREFETCH_CONDITIONAL
#define PREFETCH_CONDITIONAL 1
#endif

#define LOOP_REG_LIFETIME(LOOP, REGNO) \
((REGNO_LAST_LUID (REGNO) - REGNO_FIRST_LUID (REGNO)))

#define LOOP_REG_GLOBAL_P(LOOP, REGNO) \
((REGNO_LAST_LUID (REGNO) > INSN_LUID ((LOOP)->end) \
 || REGNO_FIRST_LUID (REGNO) < INSN_LUID ((LOOP)->start)))

#define LOOP_REGNO_NREGS(REGNO, SET_DEST) \
((REGNO) < FIRST_PSEUDO_REGISTER \
 ? (int) hard_regno_nregs[(REGNO)][GET_MODE (SET_DEST)] : 1)


/* Vector mapping INSN_UIDs to luids.
   The luids are like uids but increase monotonically always.
   We use them to see whether a jump comes from outside a given loop.  */

static int *uid_luid;

/* Indexed by INSN_UID, contains the ordinal giving the (innermost) loop
   number the insn is contained in.  */

static struct loop **uid_loop;

/* 1 + largest uid of any insn.  */

static int max_uid_for_loop;

/* Number of loops detected in current function.  Used as index to the
   next few tables.  */

static int max_loop_num;

/* Bound on pseudo register number before loop optimization.
   A pseudo has valid regscan info if its number is < max_reg_before_loop.  */
static unsigned int max_reg_before_loop;

/* The value to pass to the next call of reg_scan_update.  */
static int loop_max_reg;

/* During the analysis of a loop, a chain of `struct movable's
   is made to record all the movable insns found.
   Then the entire chain can be scanned to decide which to move.  */

struct movable
{
  rtx insn;			/* A movable insn */
  rtx set_src;			/* The expression this reg is set from.  */
  rtx set_dest;			/* The destination of this SET.  */
  rtx dependencies;		/* When INSN is libcall, this is an EXPR_LIST
				   of any registers used within the LIBCALL.  */
  int consec;			/* Number of consecutive following insns
				   that must be moved with this one.  */
  unsigned int regno;		/* The register it sets */
  short lifetime;		/* lifetime of that register;
				   may be adjusted when matching movables
				   that load the same value are found.  */
  short savings;		/* Number of insns we can move for this reg,
				   including other movables that force this
				   or match this one.  */
  ENUM_BITFIELD(machine_mode) savemode : 8;   /* Nonzero means it is a mode for
				   a low part that we should avoid changing when
				   clearing the rest of the reg.  */
  unsigned int cond : 1;	/* 1 if only conditionally movable */
  unsigned int force : 1;	/* 1 means MUST move this insn */
  unsigned int global : 1;	/* 1 means reg is live outside this loop */
		/* If PARTIAL is 1, GLOBAL means something different:
		   that the reg is live outside the range from where it is set
		   to the following label.  */
  unsigned int done : 1;	/* 1 inhibits further processing of this */

  unsigned int partial : 1;	/* 1 means this reg is used for zero-extending.
				   In particular, moving it does not make it
				   invariant.  */
  unsigned int move_insn : 1;	/* 1 means that we call emit_move_insn to
				   load SRC, rather than copying INSN.  */
  unsigned int move_insn_first:1;/* Same as above, if this is necessary for the
				    first insn of a consecutive sets group.  */
  unsigned int is_equiv : 1;	/* 1 means a REG_EQUIV is present on INSN.  */
  unsigned int insert_temp : 1;  /* 1 means we copy to a new pseudo and replace
				    the original insn with a copy from that
				    pseudo, rather than deleting it.  */
  struct movable *match;	/* First entry for same value */
  struct movable *forces;	/* An insn that must be moved if this is */
  struct movable *next;
};


static FILE *loop_dump_stream;

/* Forward declarations.  */

static void invalidate_loops_containing_label (rtx);
static void find_and_verify_loops (rtx, struct loops *);
static void mark_loop_jump (rtx, struct loop *);
static void prescan_loop (struct loop *);
static int reg_in_basic_block_p (rtx, rtx);
static int consec_sets_invariant_p (const struct loop *, rtx, int, rtx);
static int labels_in_range_p (rtx, int);
static void count_one_set (struct loop_regs *, rtx, rtx, rtx *);
static void note_addr_stored (rtx, rtx, void *);
static void note_set_pseudo_multiple_uses (rtx, rtx, void *);
static int loop_reg_used_before_p (const struct loop *, rtx, rtx);
static rtx find_regs_nested (rtx, rtx);
static void scan_loop (struct loop*, int);
#if 0
static void replace_call_address (rtx, rtx, rtx);
#endif
static rtx skip_consec_insns (rtx, int);
static int libcall_benefit (rtx);
static rtx libcall_other_reg (rtx, rtx);
static void record_excess_regs (rtx, rtx, rtx *);
static void ignore_some_movables (struct loop_movables *);
static void force_movables (struct loop_movables *);
static void combine_movables (struct loop_movables *, struct loop_regs *);
static int num_unmoved_movables (const struct loop *);
static int regs_match_p (rtx, rtx, struct loop_movables *);
static int rtx_equal_for_loop_p (rtx, rtx, struct loop_movables *,
				 struct loop_regs *);
static void add_label_notes (rtx, rtx);
static void move_movables (struct loop *loop, struct loop_movables *, int,
			   int);
static void loop_movables_add (struct loop_movables *, struct movable *);
static void loop_movables_free (struct loop_movables *);
static int count_nonfixed_reads (const struct loop *, rtx);
static void loop_bivs_find (struct loop *);
static void loop_bivs_init_find (struct loop *);
static void loop_bivs_check (struct loop *);
static void loop_givs_find (struct loop *);
static void loop_givs_check (struct loop *);
static int loop_biv_eliminable_p (struct loop *, struct iv_class *, int, int);
static int loop_giv_reduce_benefit (struct loop *, struct iv_class *,
				    struct induction *, rtx);
static void loop_givs_dead_check (struct loop *, struct iv_class *);
static void loop_givs_reduce (struct loop *, struct iv_class *);
static void loop_givs_rescan (struct loop *, struct iv_class *, rtx *);
static void loop_ivs_free (struct loop *);
static void strength_reduce (struct loop *, int);
static void find_single_use_in_loop (struct loop_regs *, rtx, rtx);
static int valid_initial_value_p (rtx, rtx, int, rtx);
static void find_mem_givs (const struct loop *, rtx, rtx, int, int);
static void record_biv (struct loop *, struct induction *, rtx, rtx, rtx,
			rtx, rtx *, int, int);
static void check_final_value (const struct loop *, struct induction *);
static void loop_ivs_dump (const struct loop *, FILE *, int);
static void loop_iv_class_dump (const struct iv_class *, FILE *, int);
static void loop_biv_dump (const struct induction *, FILE *, int);
static void loop_giv_dump (const struct induction *, FILE *, int);
static void record_giv (const struct loop *, struct induction *, rtx, rtx,
			rtx, rtx, rtx, rtx, int, enum g_types, int, int,
			rtx *);
static void update_giv_derive (const struct loop *, rtx);
static HOST_WIDE_INT get_monotonic_increment (struct iv_class *);
static bool biased_biv_fits_mode_p (const struct loop *, struct iv_class *,
				    HOST_WIDE_INT, enum machine_mode,
				    unsigned HOST_WIDE_INT);
static bool biv_fits_mode_p (const struct loop *, struct iv_class *,
			     HOST_WIDE_INT, enum machine_mode, bool);
static bool extension_within_bounds_p (const struct loop *, struct iv_class *,
				       HOST_WIDE_INT, rtx);
static void check_ext_dependent_givs (const struct loop *, struct iv_class *);
static int basic_induction_var (const struct loop *, rtx, enum machine_mode,
				rtx, rtx, rtx *, rtx *, rtx **);
static rtx simplify_giv_expr (const struct loop *, rtx, rtx *, int *);
static int general_induction_var (const struct loop *loop, rtx, rtx *, rtx *,
				  rtx *, rtx *, int, int *, enum machine_mode);
static int consec_sets_giv (const struct loop *, int, rtx, rtx, rtx, rtx *,
			    rtx *, rtx *, rtx *);
static int check_dbra_loop (struct loop *, int);
static rtx express_from_1 (rtx, rtx, rtx);
static rtx combine_givs_p (struct induction *, struct induction *);
static int cmp_combine_givs_stats (const void *, const void *);
static void combine_givs (struct loop_regs *, struct iv_class *);
static int product_cheap_p (rtx, rtx);
static int maybe_eliminate_biv (const struct loop *, struct iv_class *, int,
				int, int);
static int maybe_eliminate_biv_1 (const struct loop *, rtx, rtx,
				  struct iv_class *, int, basic_block, rtx);
static int last_use_this_basic_block (rtx, rtx);
static void record_initial (rtx, rtx, void *);
static void update_reg_last_use (rtx, rtx);
static rtx next_insn_in_loop (const struct loop *, rtx);
static void loop_regs_scan (const struct loop *, int);
static int count_insns_in_loop (const struct loop *);
static int find_mem_in_note_1 (rtx *, void *);
static rtx find_mem_in_note (rtx);
static void load_mems (const struct loop *);
static int insert_loop_mem (rtx *, void *);
static int replace_loop_mem (rtx *, void *);
static void replace_loop_mems (rtx, rtx, rtx, int);
static int replace_loop_reg (rtx *, void *);
static void replace_loop_regs (rtx insn, rtx, rtx);
static void note_reg_stored (rtx, rtx, void *);
static void try_copy_prop (const struct loop *, rtx, unsigned int);
static void try_swap_copy_prop (const struct loop *, rtx, unsigned int);
static rtx check_insn_for_givs (struct loop *, rtx, int, int);
static rtx check_insn_for_bivs (struct loop *, rtx, int, int);
static rtx gen_add_mult (rtx, rtx, rtx, rtx);
static void loop_regs_update (const struct loop *, rtx);
static int iv_add_mult_cost (rtx, rtx, rtx, rtx);
static int loop_invariant_p (const struct loop *, rtx);
static rtx loop_insn_hoist (const struct loop *, rtx);
static void loop_iv_add_mult_emit_before (const struct loop *, rtx, rtx, rtx,
					  rtx, basic_block, rtx);
static rtx loop_insn_emit_before (const struct loop *, basic_block,
				  rtx, rtx);
static int loop_insn_first_p (rtx, rtx);
static rtx get_condition_for_loop (const struct loop *, rtx);
static void loop_iv_add_mult_sink (const struct loop *, rtx, rtx, rtx, rtx);
static void loop_iv_add_mult_hoist (const struct loop *, rtx, rtx, rtx, rtx);
static rtx extend_value_for_giv (struct induction *, rtx);
static rtx loop_insn_sink (const struct loop *, rtx);

static rtx loop_insn_emit_after (const struct loop *, basic_block, rtx, rtx);
static rtx loop_call_insn_emit_before (const struct loop *, basic_block,
				       rtx, rtx);
static rtx loop_call_insn_hoist (const struct loop *, rtx);
static rtx loop_insn_sink_or_swim (const struct loop *, rtx);

static void loop_dump_aux (const struct loop *, FILE *, int);
static void loop_delete_insns (rtx, rtx);
static HOST_WIDE_INT remove_constant_addition (rtx *);
static rtx gen_load_of_final_value (rtx, rtx);
void debug_ivs (const struct loop *);
void debug_iv_class (const struct iv_class *);
void debug_biv (const struct induction *);
void debug_giv (const struct induction *);
void debug_loop (const struct loop *);
void debug_loops (const struct loops *);

typedef struct loop_replace_args
{
  rtx match;
  rtx replacement;
  rtx insn;
} loop_replace_args;

/* Nonzero iff INSN is between START and END, inclusive.  */
#define INSN_IN_RANGE_P(INSN, START, END)	\
  (INSN_UID (INSN) < max_uid_for_loop		\
   && INSN_LUID (INSN) >= INSN_LUID (START)	\
   && INSN_LUID (INSN) <= INSN_LUID (END))

/* Indirect_jump_in_function is computed once per function.  */
static int indirect_jump_in_function;
static int indirect_jump_in_function_p (rtx);

static int compute_luids (rtx, rtx, int);

static int biv_elimination_giv_has_0_offset (struct induction *,
					     struct induction *, rtx);

/* Benefit penalty, if a giv is not replaceable, i.e. must emit an insn to
   copy the value of the strength reduced giv to its original register.  */
static int copy_cost;

/* Cost of using a register, to normalize the benefits of a giv.  */
static int reg_address_cost;

void
init_loop (void)
{
  rtx reg = gen_rtx_REG (word_mode, LAST_VIRTUAL_REGISTER + 1);

  reg_address_cost = address_cost (reg, SImode);

  copy_cost = COSTS_N_INSNS (1);
}

/* Compute the mapping from uids to luids.
   LUIDs are numbers assigned to insns, like uids,
   except that luids increase monotonically through the code.
   Start at insn START and stop just before END.  Assign LUIDs
   starting with PREV_LUID + 1.  Return the last assigned LUID + 1.  */
static int
compute_luids (rtx start, rtx end, int prev_luid)
{
  int i;
  rtx insn;

  for (insn = start, i = prev_luid; insn != end; insn = NEXT_INSN (insn))
    {
      if (INSN_UID (insn) >= max_uid_for_loop)
	continue;
      /* Don't assign luids to line-number NOTEs, so that the distance in
	 luids between two insns is not affected by -g.  */
      if (!NOTE_P (insn)
	  || NOTE_LINE_NUMBER (insn) <= 0)
	uid_luid[INSN_UID (insn)] = ++i;
      else
	/* Give a line number note the same luid as preceding insn.  */
	uid_luid[INSN_UID (insn)] = i;
    }
  return i + 1;
}

/* Entry point of this file.  Perform loop optimization
   on the current function.  F is the first insn of the function
   and DUMPFILE is a stream for output of a trace of actions taken
   (or 0 if none should be output).  */

void
loop_optimize (rtx f, FILE *dumpfile, int flags)
{
  rtx insn;
  int i;
  struct loops loops_data;
  struct loops *loops = &loops_data;
  struct loop_info *loops_info;

  loop_dump_stream = dumpfile;

  init_recog_no_volatile ();

  max_reg_before_loop = max_reg_num ();
  loop_max_reg = max_reg_before_loop;

  regs_may_share = 0;

  /* Count the number of loops.  */

  max_loop_num = 0;
  for (insn = f; insn; insn = NEXT_INSN (insn))
    {
      if (NOTE_P (insn)
	  && NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
	max_loop_num++;
    }

  /* Don't waste time if no loops.  */
  if (max_loop_num == 0)
    return;

  loops->num = max_loop_num;

  /* Get size to use for tables indexed by uids.
     Leave some space for labels allocated by find_and_verify_loops.  */
  max_uid_for_loop = get_max_uid () + 1 + max_loop_num * 32;

  uid_luid = xcalloc (max_uid_for_loop, sizeof (int));
  uid_loop = xcalloc (max_uid_for_loop, sizeof (struct loop *));

  /* Allocate storage for array of loops.  */
  loops->array = xcalloc (loops->num, sizeof (struct loop));

  /* Find and process each loop.
     First, find them, and record them in order of their beginnings.  */
  find_and_verify_loops (f, loops);

  /* Allocate and initialize auxiliary loop information.  */
  loops_info = xcalloc (loops->num, sizeof (struct loop_info));
  for (i = 0; i < (int) loops->num; i++)
    loops->array[i].aux = loops_info + i;

  /* Now find all register lifetimes.  This must be done after
     find_and_verify_loops, because it might reorder the insns in the
     function.  */
  reg_scan (f, max_reg_before_loop);

  /* This must occur after reg_scan so that registers created by gcse
     will have entries in the register tables.

     We could have added a call to reg_scan after gcse_main in toplev.c,
     but moving this call to init_alias_analysis is more efficient.  */
  init_alias_analysis ();

  /* See if we went too far.  Note that get_max_uid already returns
     one more that the maximum uid of all insn.  */
  if (get_max_uid () > max_uid_for_loop)
    abort ();
  /* Now reset it to the actual size we need.  See above.  */
  max_uid_for_loop = get_max_uid ();

  /* find_and_verify_loops has already called compute_luids, but it
     might have rearranged code afterwards, so we need to recompute
     the luids now.  */
  compute_luids (f, NULL_RTX, 0);

  /* Don't leave gaps in uid_luid for insns that have been
     deleted.  It is possible that the first or last insn
     using some register has been deleted by cross-jumping.
     Make sure that uid_luid for that former insn's uid
     points to the general area where that insn used to be.  */
  for (i = 0; i < max_uid_for_loop; i++)
    {
      uid_luid[0] = uid_luid[i];
      if (uid_luid[0] != 0)
	break;
    }
  for (i = 0; i < max_uid_for_loop; i++)
    if (uid_luid[i] == 0)
      uid_luid[i] = uid_luid[i - 1];

  /* Determine if the function has indirect jump.  On some systems
     this prevents low overhead loop instructions from being used.  */
  indirect_jump_in_function = indirect_jump_in_function_p (f);

  /* Now scan the loops, last ones first, since this means inner ones are done
     before outer ones.  */
  for (i = max_loop_num - 1; i >= 0; i--)
    {
      struct loop *loop = &loops->array[i];

      if (! loop->invalid && loop->end)
	{
	  scan_loop (loop, flags);
	  ggc_collect ();
	}
    }

  end_alias_analysis ();

  /* Clean up.  */
  for (i = 0; i < (int) loops->num; i++)
    free (loops_info[i].mems);
  
  free (uid_luid);
  free (uid_loop);
  free (loops_info);
  free (loops->array);
}

/* Returns the next insn, in execution order, after INSN.  START and
   END are the NOTE_INSN_LOOP_BEG and NOTE_INSN_LOOP_END for the loop,
   respectively.  LOOP->TOP, if non-NULL, is the top of the loop in the
   insn-stream; it is used with loops that are entered near the
   bottom.  */

static rtx
next_insn_in_loop (const struct loop *loop, rtx insn)
{
  insn = NEXT_INSN (insn);

  if (insn == loop->end)
    {
      if (loop->top)
	/* Go to the top of the loop, and continue there.  */
	insn = loop->top;
      else
	/* We're done.  */
	insn = NULL_RTX;
    }

  if (insn == loop->scan_start)
    /* We're done.  */
    insn = NULL_RTX;

  return insn;
}

/* Find any register references hidden inside X and add them to
   the dependency list DEPS.  This is used to look inside CLOBBER (MEM
   when checking whether a PARALLEL can be pulled out of a loop.  */

static rtx
find_regs_nested (rtx deps, rtx x)
{
  enum rtx_code code = GET_CODE (x);
  if (code == REG)
    deps = gen_rtx_EXPR_LIST (VOIDmode, x, deps);
  else
    {
      const char *fmt = GET_RTX_FORMAT (code);
      int i, j;
      for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
	{
	  if (fmt[i] == 'e')
	    deps = find_regs_nested (deps, XEXP (x, i));
	  else if (fmt[i] == 'E')
	    for (j = 0; j < XVECLEN (x, i); j++)
	      deps = find_regs_nested (deps, XVECEXP (x, i, j));
	}
    }
  return deps;
}

/* Optimize one loop described by LOOP.  */

/* ??? Could also move memory writes out of loops if the destination address
   is invariant, the source is invariant, the memory write is not volatile,
   and if we can prove that no read inside the loop can read this address
   before the write occurs.  If there is a read of this address after the
   write, then we can also mark the memory read as invariant.  */

static void
scan_loop (struct loop *loop, int flags)
{
  struct loop_info *loop_info = LOOP_INFO (loop);
  struct loop_regs *regs = LOOP_REGS (loop);
  int i;
  rtx loop_start = loop->start;
  rtx loop_end = loop->end;
  rtx p;
  /* 1 if we are scanning insns that could be executed zero times.  */
  int maybe_never = 0;
  /* 1 if we are scanning insns that might never be executed
     due to a subroutine call which might exit before they are reached.  */
  int call_passed = 0;
  /* Number of insns in the loop.  */
  int insn_count;
  int tem;
  rtx temp, update_start, update_end;
  /* The SET from an insn, if it is the only SET in the insn.  */
  rtx set, set1;
  /* Chain describing insns movable in current loop.  */
  struct loop_movables *movables = LOOP_MOVABLES (loop);
  /* Ratio of extra register life span we can justify
     for saving an instruction.  More if loop doesn't call subroutines
     since in that case saving an insn makes more difference
     and more registers are available.  */
  int threshold;
  int in_libcall;

  loop->top = 0;

  movables->head = 0;
  movables->last = 0;

  /* Determine whether this loop starts with a jump down to a test at
     the end.  This will occur for a small number of loops with a test
     that is too complex to duplicate in front of the loop.

     We search for the first insn or label in the loop, skipping NOTEs.
     However, we must be careful not to skip past a NOTE_INSN_LOOP_BEG
     (because we might have a loop executed only once that contains a
     loop which starts with a jump to its exit test) or a NOTE_INSN_LOOP_END
     (in case we have a degenerate loop).

     Note that if we mistakenly think that a loop is entered at the top
     when, in fact, it is entered at the exit test, the only effect will be
     slightly poorer optimization.  Making the opposite error can generate
     incorrect code.  Since very few loops now start with a jump to the
     exit test, the code here to detect that case is very conservative.  */

  for (p = NEXT_INSN (loop_start);
       p != loop_end
	 && !LABEL_P (p) && ! INSN_P (p)
	 && (!NOTE_P (p)
	     || (NOTE_LINE_NUMBER (p) != NOTE_INSN_LOOP_BEG
		 && NOTE_LINE_NUMBER (p) != NOTE_INSN_LOOP_END));
       p = NEXT_INSN (p))
    ;

  loop->scan_start = p;

  /* If loop end is the end of the current function, then emit a
     NOTE_INSN_DELETED after loop_end and set loop->sink to the dummy
     note insn.  This is the position we use when sinking insns out of
     the loop.  */
  if (NEXT_INSN (loop->end) != 0)
    loop->sink = NEXT_INSN (loop->end);
  else
    loop->sink = emit_note_after (NOTE_INSN_DELETED, loop->end);

  /* Set up variables describing this loop.  */
  prescan_loop (loop);
  threshold = (loop_info->has_call ? 1 : 2) * (1 + n_non_fixed_regs);

  /* If loop has a jump before the first label,
     the true entry is the target of that jump.
     Start scan from there.
     But record in LOOP->TOP the place where the end-test jumps
     back to so we can scan that after the end of the loop.  */
  if (JUMP_P (p)
      /* Loop entry must be unconditional jump (and not a RETURN)  */
      && any_uncondjump_p (p)
      && JUMP_LABEL (p) != 0
      /* Check to see whether the jump actually
	 jumps out of the loop (meaning it's no loop).
	 This case can happen for things like
	 do {..} while (0).  If this label was generated previously
	 by loop, we can't tell anything about it and have to reject
	 the loop.  */
      && INSN_IN_RANGE_P (JUMP_LABEL (p), loop_start, loop_end))
    {
      loop->top = next_label (loop->scan_start);
      loop->scan_start = JUMP_LABEL (p);
    }

  /* If LOOP->SCAN_START was an insn created by loop, we don't know its luid
     as required by loop_reg_used_before_p.  So skip such loops.  (This
     test may never be true, but it's best to play it safe.)

     Also, skip loops where we do not start scanning at a label.  This
     test also rejects loops starting with a JUMP_INSN that failed the
     test above.  */

  if (INSN_UID (loop->scan_start) >= max_uid_for_loop
      || !LABEL_P (loop->scan_start))
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream, "\nLoop from %d to %d is phony.\n\n",
		 INSN_UID (loop_start), INSN_UID (loop_end));
      return;
    }

  /* Allocate extra space for REGs that might be created by load_mems.
     We allocate a little extra slop as well, in the hopes that we
     won't have to reallocate the regs array.  */
  loop_regs_scan (loop, loop_info->mems_idx + 16);
  insn_count = count_insns_in_loop (loop);

  if (loop_dump_stream)
    fprintf (loop_dump_stream, "\nLoop from %d to %d: %d real insns.\n",
	     INSN_UID (loop_start), INSN_UID (loop_end), insn_count);

  /* Scan through the loop finding insns that are safe to move.
     Set REGS->ARRAY[I].SET_IN_LOOP negative for the reg I being set, so that
     this reg will be considered invariant for subsequent insns.
     We consider whether subsequent insns use the reg
     in deciding whether it is worth actually moving.

     MAYBE_NEVER is nonzero if we have passed a conditional jump insn
     and therefore it is possible that the insns we are scanning
     would never be executed.  At such times, we must make sure
     that it is safe to execute the insn once instead of zero times.
     When MAYBE_NEVER is 0, all insns will be executed at least once
     so that is not a problem.  */

  for (in_libcall = 0, p = next_insn_in_loop (loop, loop->scan_start);
       p != NULL_RTX;
       p = next_insn_in_loop (loop, p))
    {
      if (in_libcall && INSN_P (p) && find_reg_note (p, REG_RETVAL, NULL_RTX))
	in_libcall--;
      if (NONJUMP_INSN_P (p))
	{
	  /* Do not scan past an optimization barrier.  */
	  if (GET_CODE (PATTERN (p)) == ASM_INPUT)
	    break;
	  temp = find_reg_note (p, REG_LIBCALL, NULL_RTX);
	  if (temp)
	    in_libcall++;
	  if (! in_libcall
	      && (set = single_set (p))
	      && REG_P (SET_DEST (set))
#ifdef PIC_OFFSET_TABLE_REG_CALL_CLOBBERED
	      && SET_DEST (set) != pic_offset_table_rtx
#endif
	      && ! regs->array[REGNO (SET_DEST (set))].may_not_optimize)
	    {
	      int tem1 = 0;
	      int tem2 = 0;
	      int move_insn = 0;
	      int insert_temp = 0;
	      rtx src = SET_SRC (set);
	      rtx dependencies = 0;

	      /* Figure out what to use as a source of this insn.  If a
		 REG_EQUIV note is given or if a REG_EQUAL note with a
		 constant operand is specified, use it as the source and
		 mark that we should move this insn by calling
		 emit_move_insn rather that duplicating the insn.

		 Otherwise, only use the REG_EQUAL contents if a REG_RETVAL
		 note is present.  */
	      temp = find_reg_note (p, REG_EQUIV, NULL_RTX);
	      if (temp)
		src = XEXP (temp, 0), move_insn = 1;
	      else
		{
		  temp = find_reg_note (p, REG_EQUAL, NULL_RTX);
		  if (temp && CONSTANT_P (XEXP (temp, 0)))
		    src = XEXP (temp, 0), move_insn = 1;
		  if (temp && find_reg_note (p, REG_RETVAL, NULL_RTX))
		    {
		      src = XEXP (temp, 0);
		      /* A libcall block can use regs that don't appear in
			 the equivalent expression.  To move the libcall,
			 we must move those regs too.  */
		      dependencies = libcall_other_reg (p, src);
		    }
		}

	      /* For parallels, add any possible uses to the dependencies, as
		 we can't move the insn without resolving them first.
		 MEMs inside CLOBBERs may also reference registers; these
		 count as implicit uses.  */
	      if (GET_CODE (PATTERN (p)) == PARALLEL)
		{
		  for (i = 0; i < XVECLEN (PATTERN (p), 0); i++)
		    {
		      rtx x = XVECEXP (PATTERN (p), 0, i);
		      if (GET_CODE (x) == USE)
			dependencies
			  = gen_rtx_EXPR_LIST (VOIDmode, XEXP (x, 0),
					       dependencies);
		      else if (GET_CODE (x) == CLOBBER 
			       && MEM_P (XEXP (x, 0)))
			dependencies = find_regs_nested (dependencies, 
						  XEXP (XEXP (x, 0), 0));
		    }
		}

	      if (/* The register is used in basic blocks other
		      than the one where it is set (meaning that
		      something after this point in the loop might
		      depend on its value before the set).  */
		   ! reg_in_basic_block_p (p, SET_DEST (set))
		   /* And the set is not guaranteed to be executed once
		      the loop starts, or the value before the set is
		      needed before the set occurs...

		      ??? Note we have quadratic behavior here, mitigated
		      by the fact that the previous test will often fail for
		      large loops.  Rather than re-scanning the entire loop
		      each time for register usage, we should build tables
		      of the register usage and use them here instead.  */
		   && (maybe_never
		       || loop_reg_used_before_p (loop, set, p)))
		/* It is unsafe to move the set.  However, it may be OK to
		   move the source into a new pseudo, and substitute a
		   reg-to-reg copy for the original insn.

		   This code used to consider it OK to move a set of a variable
		   which was not created by the user and not used in an exit
		   test.
		   That behavior is incorrect and was removed.  */
		insert_temp = 1;

	      /* Don't try to optimize a MODE_CC set with a constant
		 source.  It probably will be combined with a conditional
		 jump.  */
	      if (GET_MODE_CLASS (GET_MODE (SET_DEST (set))) == MODE_CC
		  && CONSTANT_P (src))
		;
	      /* Don't try to optimize a register that was made
		 by loop-optimization for an inner loop.
		 We don't know its life-span, so we can't compute
		 the benefit.  */
	      else if (REGNO (SET_DEST (set)) >= max_reg_before_loop)
		;
	      /* Don't move the source and add a reg-to-reg copy:
		 - with -Os (this certainly increases size),
		 - if the mode doesn't support copy operations (obviously),
		 - if the source is already a reg (the motion will gain nothing),
		 - if the source is a legitimate constant (likewise).  */
	      else if (insert_temp
		       && (optimize_size
			   || ! can_copy_p (GET_MODE (SET_SRC (set)))
			   || REG_P (SET_SRC (set))
			   || (CONSTANT_P (SET_SRC (set))
			       && LEGITIMATE_CONSTANT_P (SET_SRC (set)))))
		;
	      else if ((tem = loop_invariant_p (loop, src))
		       && (dependencies == 0
			   || (tem2
			       = loop_invariant_p (loop, dependencies)) != 0)
		       && (regs->array[REGNO (SET_DEST (set))].set_in_loop == 1
			   || (tem1
			       = consec_sets_invariant_p
			       (loop, SET_DEST (set),
				regs->array[REGNO (SET_DEST (set))].set_in_loop,
				p)))
		       /* If the insn can cause a trap (such as divide by zero),
			  can't move it unless it's guaranteed to be executed
			  once loop is entered.  Even a function call might
			  prevent the trap insn from being reached
			  (since it might exit!)  */
		       && ! ((maybe_never || call_passed)
			     && may_trap_p (src)))
		{
		  struct movable *m;
		  int regno = REGNO (SET_DEST (set));

		  /* A potential lossage is where we have a case where two insns
		     can be combined as long as they are both in the loop, but
		     we move one of them outside the loop.  For large loops,
		     this can lose.  The most common case of this is the address
		     of a function being called.

		     Therefore, if this register is marked as being used
		     exactly once if we are in a loop with calls
		     (a "large loop"), see if we can replace the usage of
		     this register with the source of this SET.  If we can,
		     delete this insn.

		     Don't do this if P has a REG_RETVAL note or if we have
		     SMALL_REGISTER_CLASSES and SET_SRC is a hard register.  */

		  if (loop_info->has_call
		      && regs->array[regno].single_usage != 0
		      && regs->array[regno].single_usage != const0_rtx
		      && REGNO_FIRST_UID (regno) == INSN_UID (p)
		      && (REGNO_LAST_UID (regno)
			  == INSN_UID (regs->array[regno].single_usage))
		      && regs->array[regno].set_in_loop == 1
		      && GET_CODE (SET_SRC (set)) != ASM_OPERANDS
		      && ! side_effects_p (SET_SRC (set))
		      && ! find_reg_note (p, REG_RETVAL, NULL_RTX)
		      && (! SMALL_REGISTER_CLASSES
			  || (! (REG_P (SET_SRC (set))
				 && (REGNO (SET_SRC (set))
				     < FIRST_PSEUDO_REGISTER))))
		      && regno >= FIRST_PSEUDO_REGISTER 
		      /* This test is not redundant; SET_SRC (set) might be
			 a call-clobbered register and the life of REGNO
			 might span a call.  */
		      && ! modified_between_p (SET_SRC (set), p,
					       regs->array[regno].single_usage)
		      && no_labels_between_p (p,
					      regs->array[regno].single_usage)
		      && validate_replace_rtx (SET_DEST (set), SET_SRC (set),
					       regs->array[regno].single_usage))
		    {
		      /* Replace any usage in a REG_EQUAL note.  Must copy
			 the new source, so that we don't get rtx sharing
			 between the SET_SOURCE and REG_NOTES of insn p.  */
		      REG_NOTES (regs->array[regno].single_usage)
			= (replace_rtx
			   (REG_NOTES (regs->array[regno].single_usage),
			    SET_DEST (set), copy_rtx (SET_SRC (set))));

		      delete_insn (p);
		      for (i = 0; i < LOOP_REGNO_NREGS (regno, SET_DEST (set));
			   i++)
			regs->array[regno+i].set_in_loop = 0;
		      continue;
		    }

		  m = xmalloc (sizeof (struct movable));
		  m->next = 0;
		  m->insn = p;
		  m->set_src = src;
		  m->dependencies = dependencies;
		  m->set_dest = SET_DEST (set);
		  m->force = 0;
		  m->consec
		    = regs->array[REGNO (SET_DEST (set))].set_in_loop - 1;
		  m->done = 0;
		  m->forces = 0;
		  m->partial = 0;
		  m->move_insn = move_insn;
		  m->move_insn_first = 0;
		  m->insert_temp = insert_temp;
		  m->is_equiv = (find_reg_note (p, REG_EQUIV, NULL_RTX) != 0);
		  m->savemode = VOIDmode;
		  m->regno = regno;
		  /* Set M->cond if either loop_invariant_p
		     or consec_sets_invariant_p returned 2
		     (only conditionally invariant).  */
		  m->cond = ((tem | tem1 | tem2) > 1);
		  m->global =  LOOP_REG_GLOBAL_P (loop, regno);
		  m->match = 0;
		  m->lifetime = LOOP_REG_LIFETIME (loop, regno);
		  m->savings = regs->array[regno].n_times_set;
		  if (find_reg_note (p, REG_RETVAL, NULL_RTX))
		    m->savings += libcall_benefit (p);
		  for (i = 0; i < LOOP_REGNO_NREGS (regno, SET_DEST (set)); i++)
		    regs->array[regno+i].set_in_loop = move_insn ? -2 : -1;
		  /* Add M to the end of the chain MOVABLES.  */
		  loop_movables_add (movables, m);

		  if (m->consec > 0)
		    {
		      /* It is possible for the first instruction to have a
			 REG_EQUAL note but a non-invariant SET_SRC, so we must
			 remember the status of the first instruction in case
			 the last instruction doesn't have a REG_EQUAL note.  */
		      m->move_insn_first = m->move_insn;

		      /* Skip this insn, not checking REG_LIBCALL notes.  */
		      p = next_nonnote_insn (p);
		      /* Skip the consecutive insns, if there are any.  */
		      p = skip_consec_insns (p, m->consec);
		      /* Back up to the last insn of the consecutive group.  */
		      p = prev_nonnote_insn (p);

		      /* We must now reset m->move_insn, m->is_equiv, and
			 possibly m->set_src to correspond to the effects of
			 all the insns.  */
		      temp = find_reg_note (p, REG_EQUIV, NULL_RTX);
		      if (temp)
			m->set_src = XEXP (temp, 0), m->move_insn = 1;
		      else
			{
			  temp = find_reg_note (p, REG_EQUAL, NULL_RTX);
			  if (temp && CONSTANT_P (XEXP (temp, 0)))
			    m->set_src = XEXP (temp, 0), m->move_insn = 1;
			  else
			    m->move_insn = 0;

			}
		      m->is_equiv
			= (find_reg_note (p, REG_EQUIV, NULL_RTX) != 0);
		    }
		}
	      /* If this register is always set within a STRICT_LOW_PART
		 or set to zero, then its high bytes are constant.
		 So clear them outside the loop and within the loop
		 just load the low bytes.
		 We must check that the machine has an instruction to do so.
		 Also, if the value loaded into the register
		 depends on the same register, this cannot be done.  */
	      else if (SET_SRC (set) == const0_rtx
		       && NONJUMP_INSN_P (NEXT_INSN (p))
		       && (set1 = single_set (NEXT_INSN (p)))
		       && GET_CODE (set1) == SET
		       && (GET_CODE (SET_DEST (set1)) == STRICT_LOW_PART)
		       && (GET_CODE (XEXP (SET_DEST (set1), 0)) == SUBREG)
		       && (SUBREG_REG (XEXP (SET_DEST (set1), 0))
			   == SET_DEST (set))
		       && !reg_mentioned_p (SET_DEST (set), SET_SRC (set1)))
		{
		  int regno = REGNO (SET_DEST (set));
		  if (regs->array[regno].set_in_loop == 2)
		    {
		      struct movable *m;
		      m = xmalloc (sizeof (struct movable));
		      m->next = 0;
		      m->insn = p;
		      m->set_dest = SET_DEST (set);
		      m->dependencies = 0;
		      m->force = 0;
		      m->consec = 0;
		      m->done = 0;
		      m->forces = 0;
		      m->move_insn = 0;
		      m->move_insn_first = 0;
		      m->insert_temp = insert_temp;
		      m->partial = 1;
		      /* If the insn may not be executed on some cycles,
			 we can't clear the whole reg; clear just high part.
			 Not even if the reg is used only within this loop.
			 Consider this:
			 while (1)
			   while (s != t) {
			     if (foo ()) x = *s;
			     use (x);
			   }
			 Clearing x before the inner loop could clobber a value
			 being saved from the last time around the outer loop.
			 However, if the reg is not used outside this loop
			 and all uses of the register are in the same
			 basic block as the store, there is no problem.

			 If this insn was made by loop, we don't know its
			 INSN_LUID and hence must make a conservative
			 assumption.  */
		      m->global = (INSN_UID (p) >= max_uid_for_loop
				   || LOOP_REG_GLOBAL_P (loop, regno)
				   || (labels_in_range_p
				       (p, REGNO_FIRST_LUID (regno))));
		      if (maybe_never && m->global)
			m->savemode = GET_MODE (SET_SRC (set1));
		      else
			m->savemode = VOIDmode;
		      m->regno = regno;
		      m->cond = 0;
		      m->match = 0;
		      m->lifetime = LOOP_REG_LIFETIME (loop, regno);
		      m->savings = 1;
		      for (i = 0;
			   i < LOOP_REGNO_NREGS (regno, SET_DEST (set));
			   i++)
			regs->array[regno+i].set_in_loop = -1;
		      /* Add M to the end of the chain MOVABLES.  */
		      loop_movables_add (movables, m);
		    }
		}
	    }
	}
      /* Past a call insn, we get to insns which might not be executed
	 because the call might exit.  This matters for insns that trap.
	 Constant and pure call insns always return, so they don't count.  */
      else if (CALL_P (p) && ! CONST_OR_PURE_CALL_P (p))
	call_passed = 1;
      /* Past a label or a jump, we get to insns for which we
	 can't count on whether or how many times they will be
	 executed during each iteration.  Therefore, we can
	 only move out sets of trivial variables
	 (those not used after the loop).  */
      /* Similar code appears twice in strength_reduce.  */
      else if ((LABEL_P (p) || JUMP_P (p))
	       /* If we enter the loop in the middle, and scan around to the
		  beginning, don't set maybe_never for that.  This must be an
		  unconditional jump, otherwise the code at the top of the
		  loop might never be executed.  Unconditional jumps are
		  followed by a barrier then the loop_end.  */
	       && ! (JUMP_P (p) && JUMP_LABEL (p) == loop->top
		     && NEXT_INSN (NEXT_INSN (p)) == loop_end
		     && any_uncondjump_p (p)))
	maybe_never = 1;
    }

  /* If one movable subsumes another, ignore that other.  */

  ignore_some_movables (movables);

  /* For each movable insn, see if the reg that it loads
     leads when it dies right into another conditionally movable insn.
     If so, record that the second insn "forces" the first one,
     since the second can be moved only if the first is.  */

  force_movables (movables);

  /* See if there are multiple movable insns that load the same value.
     If there are, make all but the first point at the first one
     through the `match' field, and add the priorities of them
     all together as the priority of the first.  */

  combine_movables (movables, regs);

  /* Now consider each movable insn to decide whether it is worth moving.
     Store 0 in regs->array[I].set_in_loop for each reg I that is moved.

     For machines with few registers this increases code size, so do not
     move moveables when optimizing for code size on such machines.
     (The 18 below is the value for i386.)  */

  if (!optimize_size
      || (reg_class_size[GENERAL_REGS] > 18 && !loop_info->has_call))
    {
      move_movables (loop, movables, threshold, insn_count);

      /* Recalculate regs->array if move_movables has created new
	 registers.  */
      if (max_reg_num () > regs->num)
	{
	  loop_regs_scan (loop, 0);
	  for (update_start = loop_start;
	       PREV_INSN (update_start)
	       && !LABEL_P (PREV_INSN (update_start));
	       update_start = PREV_INSN (update_start))
	    ;
	  update_end = NEXT_INSN (loop_end);

	  reg_scan_update (update_start, update_end, loop_max_reg);
	  loop_max_reg = max_reg_num ();
	}
    }

  /* Now candidates that still are negative are those not moved.
     Change regs->array[I].set_in_loop to indicate that those are not actually
     invariant.  */
  for (i = 0; i < regs->num; i++)
    if (regs->array[i].set_in_loop < 0)
      regs->array[i].set_in_loop = regs->array[i].n_times_set;

  /* Now that we've moved some things out of the loop, we might be able to
     hoist even more memory references.  */
  load_mems (loop);

  /* Recalculate regs->array if load_mems has created new registers.  */
  if (max_reg_num () > regs->num)
    loop_regs_scan (loop, 0);

  for (update_start = loop_start;
       PREV_INSN (update_start)
	 && !LABEL_P (PREV_INSN (update_start));
       update_start = PREV_INSN (update_start))
    ;
  update_end = NEXT_INSN (loop_end);

  reg_scan_update (update_start, update_end, loop_max_reg);
  loop_max_reg = max_reg_num ();

  if (flag_strength_reduce)
    {
      if (update_end && LABEL_P (update_end))
	/* Ensure our label doesn't go away.  */
	LABEL_NUSES (update_end)++;

      strength_reduce (loop, flags);

      reg_scan_update (update_start, update_end, loop_max_reg);
      loop_max_reg = max_reg_num ();

      if (update_end && LABEL_P (update_end)
	  && --LABEL_NUSES (update_end) == 0)
	delete_related_insns (update_end);
    }


  /* The movable information is required for strength reduction.  */
  loop_movables_free (movables);

  free (regs->array);
  regs->array = 0;
  regs->num = 0;
}

/* Add elements to *OUTPUT to record all the pseudo-regs
   mentioned in IN_THIS but not mentioned in NOT_IN_THIS.  */

static void
record_excess_regs (rtx in_this, rtx not_in_this, rtx *output)
{
  enum rtx_code code;
  const char *fmt;
  int i;

  code = GET_CODE (in_this);

  switch (code)
    {
    case PC:
    case CC0:
    case CONST_INT:
    case CONST_DOUBLE:
    case CONST:
    case SYMBOL_REF:
    case LABEL_REF:
      return;

    case REG:
      if (REGNO (in_this) >= FIRST_PSEUDO_REGISTER
	  && ! reg_mentioned_p (in_this, not_in_this))
	*output = gen_rtx_EXPR_LIST (VOIDmode, in_this, *output);
      return;

    default:
      break;
    }

  fmt = GET_RTX_FORMAT (code);
  for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
    {
      int j;

      switch (fmt[i])
	{
	case 'E':
	  for (j = 0; j < XVECLEN (in_this, i); j++)
	    record_excess_regs (XVECEXP (in_this, i, j), not_in_this, output);
	  break;

	case 'e':
	  record_excess_regs (XEXP (in_this, i), not_in_this, output);
	  break;
	}
    }
}

/* Check what regs are referred to in the libcall block ending with INSN,
   aside from those mentioned in the equivalent value.
   If there are none, return 0.
   If there are one or more, return an EXPR_LIST containing all of them.  */

static rtx
libcall_other_reg (rtx insn, rtx equiv)
{
  rtx note = find_reg_note (insn, REG_RETVAL, NULL_RTX);
  rtx p = XEXP (note, 0);
  rtx output = 0;

  /* First, find all the regs used in the libcall block
     that are not mentioned as inputs to the result.  */

  while (p != insn)
    {
      if (INSN_P (p))
	record_excess_regs (PATTERN (p), equiv, &output);
      p = NEXT_INSN (p);
    }

  return output;
}

/* Return 1 if all uses of REG
   are between INSN and the end of the basic block.  */

static int
reg_in_basic_block_p (rtx insn, rtx reg)
{
  int regno = REGNO (reg);
  rtx p;

  if (REGNO_FIRST_UID (regno) != INSN_UID (insn))
    return 0;

  /* Search this basic block for the already recorded last use of the reg.  */
  for (p = insn; p; p = NEXT_INSN (p))
    {
      switch (GET_CODE (p))
	{
	case NOTE:
	  break;

	case INSN:
	case CALL_INSN:
	  /* Ordinary insn: if this is the last use, we win.  */
	  if (REGNO_LAST_UID (regno) == INSN_UID (p))
	    return 1;
	  break;

	case JUMP_INSN:
	  /* Jump insn: if this is the last use, we win.  */
	  if (REGNO_LAST_UID (regno) == INSN_UID (p))
	    return 1;
	  /* Otherwise, it's the end of the basic block, so we lose.  */
	  return 0;

	case CODE_LABEL:
	case BARRIER:
	  /* It's the end of the basic block, so we lose.  */
	  return 0;

	default:
	  break;
	}
    }

  /* The "last use" that was recorded can't be found after the first
     use.  This can happen when the last use was deleted while
     processing an inner loop, this inner loop was then completely
     unrolled, and the outer loop is always exited after the inner loop,
     so that everything after the first use becomes a single basic block.  */
  return 1;
}

/* Compute the benefit of eliminating the insns in the block whose
   last insn is LAST.  This may be a group of insns used to compute a
   value directly or can contain a library call.  */

static int
libcall_benefit (rtx last)
{
  rtx insn;
  int benefit = 0;

  for (insn = XEXP (find_reg_note (last, REG_RETVAL, NULL_RTX), 0);
       insn != last; insn = NEXT_INSN (insn))
    {
      if (CALL_P (insn))
	benefit += 10;		/* Assume at least this many insns in a library
				   routine.  */
      else if (NONJUMP_INSN_P (insn)
	       && GET_CODE (PATTERN (insn)) != USE
	       && GET_CODE (PATTERN (insn)) != CLOBBER)
	benefit++;
    }

  return benefit;
}

/* Skip COUNT insns from INSN, counting library calls as 1 insn.  */

static rtx
skip_consec_insns (rtx insn, int count)
{
  for (; count > 0; count--)
    {
      rtx temp;

      /* If first insn of libcall sequence, skip to end.  */
      /* Do this at start of loop, since INSN is guaranteed to
	 be an insn here.  */
      if (!NOTE_P (insn)
	  && (temp = find_reg_note (insn, REG_LIBCALL, NULL_RTX)))
	insn = XEXP (temp, 0);

      do
	insn = NEXT_INSN (insn);
      while (NOTE_P (insn));
    }

  return insn;
}

/* Ignore any movable whose insn falls within a libcall
   which is part of another movable.
   We make use of the fact that the movable for the libcall value
   was made later and so appears later on the chain.  */

static void
ignore_some_movables (struct loop_movables *movables)
{
  struct movable *m, *m1;

  for (m = movables->head; m; m = m->next)
    {
      /* Is this a movable for the value of a libcall?  */
      rtx note = find_reg_note (m->insn, REG_RETVAL, NULL_RTX);
      if (note)
	{
	  rtx insn;
	  /* Check for earlier movables inside that range,
	     and mark them invalid.  We cannot use LUIDs here because
	     insns created by loop.c for prior loops don't have LUIDs.
	     Rather than reject all such insns from movables, we just
	     explicitly check each insn in the libcall (since invariant
	     libcalls aren't that common).  */
	  for (insn = XEXP (note, 0); insn != m->insn; insn = NEXT_INSN (insn))
	    for (m1 = movables->head; m1 != m; m1 = m1->next)
	      if (m1->insn == insn)
		m1->done = 1;
	}
    }
}

/* For each movable insn, see if the reg that it loads
   leads when it dies right into another conditionally movable insn.
   If so, record that the second insn "forces" the first one,
   since the second can be moved only if the first is.  */

static void
force_movables (struct loop_movables *movables)
{
  struct movable *m, *m1;

  for (m1 = movables->head; m1; m1 = m1->next)
    /* Omit this if moving just the (SET (REG) 0) of a zero-extend.  */
    if (!m1->partial && !m1->done)
      {
	int regno = m1->regno;
	for (m = m1->next; m; m = m->next)
	  /* ??? Could this be a bug?  What if CSE caused the
	     register of M1 to be used after this insn?
	     Since CSE does not update regno_last_uid,
	     this insn M->insn might not be where it dies.
	     But very likely this doesn't matter; what matters is
	     that M's reg is computed from M1's reg.  */
	  if (INSN_UID (m->insn) == REGNO_LAST_UID (regno)
	      && !m->done)
	    break;
	if (m != 0 && m->set_src == m1->set_dest
	    /* If m->consec, m->set_src isn't valid.  */
	    && m->consec == 0)
	  m = 0;

	/* Increase the priority of the moving the first insn
	   since it permits the second to be moved as well.
	   Likewise for insns already forced by the first insn.  */
	if (m != 0)
	  {
	    struct movable *m2;

	    m->forces = m1;
	    for (m2 = m1; m2; m2 = m2->forces)
	      {
		m2->lifetime += m->lifetime;
		m2->savings += m->savings;
	      }
	  }
      }
}

/* Find invariant expressions that are equal and can be combined into
   one register.  */

static void
combine_movables (struct loop_movables *movables, struct loop_regs *regs)
{
  struct movable *m;
  char *matched_regs = xmalloc (regs->num);
  enum machine_mode mode;

  /* Regs that are set more than once are not allowed to match
     or be matched.  I'm no longer sure why not.  */
  /* Only pseudo registers are allowed to match or be matched,
     since move_movables does not validate the change.  */
  /* Perhaps testing m->consec_sets would be more appropriate here?  */

  for (m = movables->head; m; m = m->next)
    if (m->match == 0 && regs->array[m->regno].n_times_set == 1
	&& m->regno >= FIRST_PSEUDO_REGISTER
	&& !m->insert_temp
	&& !m->partial)
      {
	struct movable *m1;
	int regno = m->regno;

	memset (matched_regs, 0, regs->num);
	matched_regs[regno] = 1;

	/* We want later insns to match the first one.  Don't make the first
	   one match any later ones.  So start this loop at m->next.  */
	for (m1 = m->next; m1; m1 = m1->next)
	  if (m != m1 && m1->match == 0
	      && !m1->insert_temp
	      && regs->array[m1->regno].n_times_set == 1
	      && m1->regno >= FIRST_PSEUDO_REGISTER
	      /* A reg used outside the loop mustn't be eliminated.  */
	      && !m1->global
	      /* A reg used for zero-extending mustn't be eliminated.  */
	      && !m1->partial
	      && (matched_regs[m1->regno]
		  ||
		  (
		   /* Can combine regs with different modes loaded from the
		      same constant only if the modes are the same or
		      if both are integer modes with M wider or the same
		      width as M1.  The check for integer is redundant, but
		      safe, since the only case of differing destination
		      modes with equal sources is when both sources are
		      VOIDmode, i.e., CONST_INT.  */
		   (GET_MODE (m->set_dest) == GET_MODE (m1->set_dest)
		    || (GET_MODE_CLASS (GET_MODE (m->set_dest)) == MODE_INT
			&& GET_MODE_CLASS (GET_MODE (m1->set_dest)) == MODE_INT
			&& (GET_MODE_BITSIZE (GET_MODE (m->set_dest))
			    >= GET_MODE_BITSIZE (GET_MODE (m1->set_dest)))))
		   /* See if the source of M1 says it matches M.  */
		   && ((REG_P (m1->set_src)
			&& matched_regs[REGNO (m1->set_src)])
		       || rtx_equal_for_loop_p (m->set_src, m1->set_src,
						movables, regs))))
	      && ((m->dependencies == m1->dependencies)
		  || rtx_equal_p (m->dependencies, m1->dependencies)))
	    {
	      m->lifetime += m1->lifetime;
	      m->savings += m1->savings;
	      m1->done = 1;
	      m1->match = m;
	      matched_regs[m1->regno] = 1;
	    }
      }

  /* Now combine the regs used for zero-extension.
     This can be done for those not marked `global'
     provided their lives don't overlap.  */

  for (mode = GET_CLASS_NARROWEST_MODE (MODE_INT); mode != VOIDmode;
       mode = GET_MODE_WIDER_MODE (mode))
    {
      struct movable *m0 = 0;

      /* Combine all the registers for extension from mode MODE.
	 Don't combine any that are used outside this loop.  */
      for (m = movables->head; m; m = m->next)
	if (m->partial && ! m->global
	    && mode == GET_MODE (SET_SRC (PATTERN (NEXT_INSN (m->insn)))))
	  {
	    struct movable *m1;

	    int first = REGNO_FIRST_LUID (m->regno);
	    int last = REGNO_LAST_LUID (m->regno);

	    if (m0 == 0)
	      {
		/* First one: don't check for overlap, just record it.  */
		m0 = m;
		continue;
	      }

	    /* Make sure they extend to the same mode.
	       (Almost always true.)  */
	    if (GET_MODE (m->set_dest) != GET_MODE (m0->set_dest))
	      continue;

	    /* We already have one: check for overlap with those
	       already combined together.  */
	    for (m1 = movables->head; m1 != m; m1 = m1->next)
	      if (m1 == m0 || (m1->partial && m1->match == m0))
		if (! (REGNO_FIRST_LUID (m1->regno) > last
		       || REGNO_LAST_LUID (m1->regno) < first))
		  goto overlap;

	    /* No overlap: we can combine this with the others.  */
	    m0->lifetime += m->lifetime;
	    m0->savings += m->savings;
	    m->done = 1;
	    m->match = m0;

	  overlap:
	    ;
	  }
    }

  /* Clean up.  */
  free (matched_regs);
}

/* Returns the number of movable instructions in LOOP that were not
   moved outside the loop.  */

static int
num_unmoved_movables (const struct loop *loop)
{
  int num = 0;
  struct movable *m;

  for (m = LOOP_MOVABLES (loop)->head; m; m = m->next)
    if (!m->done)
      ++num;

  return num;
}


/* Return 1 if regs X and Y will become the same if moved.  */

static int
regs_match_p (rtx x, rtx y, struct loop_movables *movables)
{
  unsigned int xn = REGNO (x);
  unsigned int yn = REGNO (y);
  struct movable *mx, *my;

  for (mx = movables->head; mx; mx = mx->next)
    if (mx->regno == xn)
      break;

  for (my = movables->head; my; my = my->next)
    if (my->regno == yn)
      break;

  return (mx && my
	  && ((mx->match == my->match && mx->match != 0)
	      || mx->match == my
	      || mx == my->match));
}

/* Return 1 if X and Y are identical-looking rtx's.
   This is the Lisp function EQUAL for rtx arguments.

   If two registers are matching movables or a movable register and an
   equivalent constant, consider them equal.  */

static int
rtx_equal_for_loop_p (rtx x, rtx y, struct loop_movables *movables,
		      struct loop_regs *regs)
{
  int i;
  int j;
  struct movable *m;
  enum rtx_code code;
  const char *fmt;

  if (x == y)
    return 1;
  if (x == 0 || y == 0)
    return 0;

  code = GET_CODE (x);

  /* If we have a register and a constant, they may sometimes be
     equal.  */
  if (REG_P (x) && regs->array[REGNO (x)].set_in_loop == -2
      && CONSTANT_P (y))
    {
      for (m = movables->head; m; m = m->next)
	if (m->move_insn && m->regno == REGNO (x)
	    && rtx_equal_p (m->set_src, y))
	  return 1;
    }
  else if (REG_P (y) && regs->array[REGNO (y)].set_in_loop == -2
	   && CONSTANT_P (x))
    {
      for (m = movables->head; m; m = m->next)
	if (m->move_insn && m->regno == REGNO (y)
	    && rtx_equal_p (m->set_src, x))
	  return 1;
    }

  /* Otherwise, rtx's of different codes cannot be equal.  */
  if (code != GET_CODE (y))
    return 0;

  /* (MULT:SI x y) and (MULT:HI x y) are NOT equivalent.
     (REG:SI x) and (REG:HI x) are NOT equivalent.  */

  if (GET_MODE (x) != GET_MODE (y))
    return 0;

  /* These three types of rtx's can be compared nonrecursively.  */
  if (code == REG)
    return (REGNO (x) == REGNO (y) || regs_match_p (x, y, movables));

  if (code == LABEL_REF)
    return XEXP (x, 0) == XEXP (y, 0);
  if (code == SYMBOL_REF)
    return XSTR (x, 0) == XSTR (y, 0);

  /* Compare the elements.  If any pair of corresponding elements
     fail to match, return 0 for the whole things.  */

  fmt = GET_RTX_FORMAT (code);
  for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
    {
      switch (fmt[i])
	{
	case 'w':
	  if (XWINT (x, i) != XWINT (y, i))
	    return 0;
	  break;

	case 'i':
	  if (XINT (x, i) != XINT (y, i))
	    return 0;
	  break;

	case 'E':
	  /* Two vectors must have the same length.  */
	  if (XVECLEN (x, i) != XVECLEN (y, i))
	    return 0;

	  /* And the corresponding elements must match.  */
	  for (j = 0; j < XVECLEN (x, i); j++)
	    if (rtx_equal_for_loop_p (XVECEXP (x, i, j), XVECEXP (y, i, j),
				      movables, regs) == 0)
	      return 0;
	  break;

	case 'e':
	  if (rtx_equal_for_loop_p (XEXP (x, i), XEXP (y, i), movables, regs)
	      == 0)
	    return 0;
	  break;

	case 's':
	  if (strcmp (XSTR (x, i), XSTR (y, i)))
	    return 0;
	  break;

	case 'u':
	  /* These are just backpointers, so they don't matter.  */
	  break;

	case '0':
	  break;

	  /* It is believed that rtx's at this level will never
	     contain anything but integers and other rtx's,
	     except for within LABEL_REFs and SYMBOL_REFs.  */
	default:
	  abort ();
	}
    }
  return 1;
}

/* If X contains any LABEL_REF's, add REG_LABEL notes for them to all
   insns in INSNS which use the reference.  LABEL_NUSES for CODE_LABEL
   references is incremented once for each added note.  */

static void
add_label_notes (rtx x, rtx insns)
{
  enum rtx_code code = GET_CODE (x);
  int i, j;
  const char *fmt;
  rtx insn;

  if (code == LABEL_REF && !LABEL_REF_NONLOCAL_P (x))
    {
      /* This code used to ignore labels that referred to dispatch tables to
         avoid flow generating (slightly) worse code.

         We no longer ignore such label references (see LABEL_REF handling in
         mark_jump_label for additional information).  */
      for (insn = insns; insn; insn = NEXT_INSN (insn))
	if (reg_mentioned_p (XEXP (x, 0), insn))
	  {
	    REG_NOTES (insn) = gen_rtx_INSN_LIST (REG_LABEL, XEXP (x, 0),
						  REG_NOTES (insn));
	    if (LABEL_P (XEXP (x, 0)))
	      LABEL_NUSES (XEXP (x, 0))++;
	  }
    }

  fmt = GET_RTX_FORMAT (code);
  for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
    {
      if (fmt[i] == 'e')
	add_label_notes (XEXP (x, i), insns);
      else if (fmt[i] == 'E')
	for (j = XVECLEN (x, i) - 1; j >= 0; j--)
	  add_label_notes (XVECEXP (x, i, j), insns);
    }
}

/* Scan MOVABLES, and move the insns that deserve to be moved.
   If two matching movables are combined, replace one reg with the
   other throughout.  */

static void
move_movables (struct loop *loop, struct loop_movables *movables,
	       int threshold, int insn_count)
{
  struct loop_regs *regs = LOOP_REGS (loop);
  int nregs = regs->num;
  rtx new_start = 0;
  struct movable *m;
  rtx p;
  rtx loop_start = loop->start;
  rtx loop_end = loop->end;
  /* Map of pseudo-register replacements to handle combining
     when we move several insns that load the same value
     into different pseudo-registers.  */
  rtx *reg_map = xcalloc (nregs, sizeof (rtx));
  char *already_moved = xcalloc (nregs, sizeof (char));

  for (m = movables->head; m; m = m->next)
    {
      /* Describe this movable insn.  */

      if (loop_dump_stream)
	{
	  fprintf (loop_dump_stream, "Insn %d: regno %d (life %d), ",
		   INSN_UID (m->insn), m->regno, m->lifetime);
	  if (m->consec > 0)
	    fprintf (loop_dump_stream, "consec %d, ", m->consec);
	  if (m->cond)
	    fprintf (loop_dump_stream, "cond ");
	  if (m->force)
	    fprintf (loop_dump_stream, "force ");
	  if (m->global)
	    fprintf (loop_dump_stream, "global ");
	  if (m->done)
	    fprintf (loop_dump_stream, "done ");
	  if (m->move_insn)
	    fprintf (loop_dump_stream, "move-insn ");
	  if (m->match)
	    fprintf (loop_dump_stream, "matches %d ",
		     INSN_UID (m->match->insn));
	  if (m->forces)
	    fprintf (loop_dump_stream, "forces %d ",
		     INSN_UID (m->forces->insn));
	}

      /* Ignore the insn if it's already done (it matched something else).
	 Otherwise, see if it is now safe to move.  */

      if (!m->done
	  && (! m->cond
	      || (1 == loop_invariant_p (loop, m->set_src)
		  && (m->dependencies == 0
		      || 1 == loop_invariant_p (loop, m->dependencies))
		  && (m->consec == 0
		      || 1 == consec_sets_invariant_p (loop, m->set_dest,
						       m->consec + 1,
						       m->insn))))
	  && (! m->forces || m->forces->done))
	{
	  int regno;
	  rtx p;
	  int savings = m->savings;

	  /* We have an insn that is safe to move.
	     Compute its desirability.  */

	  p = m->insn;
	  regno = m->regno;

	  if (loop_dump_stream)
	    fprintf (loop_dump_stream, "savings %d ", savings);

	  if (regs->array[regno].moved_once && loop_dump_stream)
	    fprintf (loop_dump_stream, "halved since already moved ");

	  /* An insn MUST be moved if we already moved something else
	     which is safe only if this one is moved too: that is,
	     if already_moved[REGNO] is nonzero.  */

	  /* An insn is desirable to move if the new lifetime of the
	     register is no more than THRESHOLD times the old lifetime.
	     If it's not desirable, it means the loop is so big
	     that moving won't speed things up much,
	     and it is liable to make register usage worse.  */

	  /* It is also desirable to move if it can be moved at no
	     extra cost because something else was already moved.  */

	  if (already_moved[regno]
	      || (threshold * savings * m->lifetime) >=
		 (regs->array[regno].moved_once ? insn_count * 2 : insn_count)
	      || (m->forces && m->forces->done
		  && regs->array[m->forces->regno].n_times_set == 1))
	    {
	      int count;
	      struct movable *m1;
	      rtx first = NULL_RTX;
	      rtx newreg = NULL_RTX;

	      if (m->insert_temp)
		newreg = gen_reg_rtx (GET_MODE (m->set_dest));

	      /* Now move the insns that set the reg.  */

	      if (m->partial && m->match)
		{
		  rtx newpat, i1;
		  rtx r1, r2;
		  /* Find the end of this chain of matching regs.
		     Thus, we load each reg in the chain from that one reg.
		     And that reg is loaded with 0 directly,
		     since it has ->match == 0.  */
		  for (m1 = m; m1->match; m1 = m1->match);
		  newpat = gen_move_insn (SET_DEST (PATTERN (m->insn)),
					  SET_DEST (PATTERN (m1->insn)));
		  i1 = loop_insn_hoist (loop, newpat);

		  /* Mark the moved, invariant reg as being allowed to
		     share a hard reg with the other matching invariant.  */
		  REG_NOTES (i1) = REG_NOTES (m->insn);
		  r1 = SET_DEST (PATTERN (m->insn));
		  r2 = SET_DEST (PATTERN (m1->insn));
		  regs_may_share
		    = gen_rtx_EXPR_LIST (VOIDmode, r1,
					 gen_rtx_EXPR_LIST (VOIDmode, r2,
							    regs_may_share));
		  delete_insn (m->insn);

		  if (new_start == 0)
		    new_start = i1;

		  if (loop_dump_stream)
		    fprintf (loop_dump_stream, " moved to %d", INSN_UID (i1));
		}
	      /* If we are to re-generate the item being moved with a
		 new move insn, first delete what we have and then emit
		 the move insn before the loop.  */
	      else if (m->move_insn)
		{
		  rtx i1, temp, seq;

		  for (count = m->consec; count >= 0; count--)
		    {
		      /* If this is the first insn of a library call sequence,
			 something is very wrong.  */
		      if (!NOTE_P (p)
			  && (temp = find_reg_note (p, REG_LIBCALL, NULL_RTX)))
			abort ();

		      /* If this is the last insn of a libcall sequence, then
			 delete every insn in the sequence except the last.
			 The last insn is handled in the normal manner.  */
		      if (!NOTE_P (p)
			  && (temp = find_reg_note (p, REG_RETVAL, NULL_RTX)))
			{
			  temp = XEXP (temp, 0);
			  while (temp != p)
			    temp = delete_insn (temp);
			}

		      temp = p;
		      p = delete_insn (p);

		      /* simplify_giv_expr expects that it can walk the insns
			 at m->insn forwards and see this old sequence we are
			 tossing here.  delete_insn does preserve the next
			 pointers, but when we skip over a NOTE we must fix
			 it up.  Otherwise that code walks into the non-deleted
			 insn stream.  */
		      while (p && NOTE_P (p))
			p = NEXT_INSN (temp) = NEXT_INSN (p);

		      if (m->insert_temp)
			{
			  /* Replace the original insn with a move from
			     our newly created temp.  */
			  start_sequence ();
			  emit_move_insn (m->set_dest, newreg);
			  seq = get_insns ();
			  end_sequence ();
			  emit_insn_before (seq, p);
			}
		    }

		  start_sequence ();
		  emit_move_insn (m->insert_temp ? newreg : m->set_dest,
			          m->set_src);
		  seq = get_insns ();
		  end_sequence ();

		  add_label_notes (m->set_src, seq);

		  i1 = loop_insn_hoist (loop, seq);
		  if (! find_reg_note (i1, REG_EQUAL, NULL_RTX))
		    set_unique_reg_note (i1,
					 m->is_equiv ? REG_EQUIV : REG_EQUAL,
					 m->set_src);

		  if (loop_dump_stream)
		    fprintf (loop_dump_stream, " moved to %d", INSN_UID (i1));

		  /* The more regs we move, the less we like moving them.  */
		  threshold -= 3;
		}
	      else
		{
		  for (count = m->consec; count >= 0; count--)
		    {
		      rtx i1, temp;

		      /* If first insn of libcall sequence, skip to end.  */
		      /* Do this at start of loop, since p is guaranteed to
			 be an insn here.  */
		      if (!NOTE_P (p)
			  && (temp = find_reg_note (p, REG_LIBCALL, NULL_RTX)))
			p = XEXP (temp, 0);

		      /* If last insn of libcall sequence, move all
			 insns except the last before the loop.  The last
			 insn is handled in the normal manner.  */
		      if (!NOTE_P (p)
			  && (temp = find_reg_note (p, REG_RETVAL, NULL_RTX)))
			{
			  rtx fn_address = 0;
			  rtx fn_reg = 0;
			  rtx fn_address_insn = 0;

			  first = 0;
			  for (temp = XEXP (temp, 0); temp != p;
			       temp = NEXT_INSN (temp))
			    {
			      rtx body;
			      rtx n;
			      rtx next;

			      if (NOTE_P (temp))
				continue;

			      body = PATTERN (temp);

			      /* Find the next insn after TEMP,
				 not counting USE or NOTE insns.  */
			      for (next = NEXT_INSN (temp); next != p;
				   next = NEXT_INSN (next))
				if (! (NONJUMP_INSN_P (next)
				       && GET_CODE (PATTERN (next)) == USE)
				    && !NOTE_P (next))
				  break;

			      /* If that is the call, this may be the insn
				 that loads the function address.

				 Extract the function address from the insn
				 that loads it into a register.
				 If this insn was cse'd, we get incorrect code.

				 So emit a new move insn that copies the
				 function address into the register that the
				 call insn will use.  flow.c will delete any
				 redundant stores that we have created.  */
			      if (CALL_P (next)
				  && GET_CODE (body) == SET
				  && REG_P (SET_DEST (body))
				  && (n = find_reg_note (temp, REG_EQUAL,
							 NULL_RTX)))
				{
				  fn_reg = SET_SRC (body);
				  if (!REG_P (fn_reg))
				    fn_reg = SET_DEST (body);
				  fn_address = XEXP (n, 0);
				  fn_address_insn = temp;
				}
			      /* We have the call insn.
				 If it uses the register we suspect it might,
				 load it with the correct address directly.  */
			      if (CALL_P (temp)
				  && fn_address != 0
				  && reg_referenced_p (fn_reg, body))
				loop_insn_emit_after (loop, 0, fn_address_insn,
						      gen_move_insn
						      (fn_reg, fn_address));

			      if (CALL_P (temp))
				{
				  i1 = loop_call_insn_hoist (loop, body);
				  /* Because the USAGE information potentially
				     contains objects other than hard registers
				     we need to copy it.  */
				  if (CALL_INSN_FUNCTION_USAGE (temp))
				    CALL_INSN_FUNCTION_USAGE (i1)
				      = copy_rtx (CALL_INSN_FUNCTION_USAGE (temp));
				}
			      else
				i1 = loop_insn_hoist (loop, body);
			      if (first == 0)
				first = i1;
			      if (temp == fn_address_insn)
				fn_address_insn = i1;
			      REG_NOTES (i1) = REG_NOTES (temp);
			      REG_NOTES (temp) = NULL;
			      delete_insn (temp);
			    }
			  if (new_start == 0)
			    new_start = first;
			}
		      if (m->savemode != VOIDmode)
			{
			  /* P sets REG to zero; but we should clear only
			     the bits that are not covered by the mode
			     m->savemode.  */
			  rtx reg = m->set_dest;
			  rtx sequence;
			  rtx tem;

			  start_sequence ();
			  tem = expand_simple_binop
			    (GET_MODE (reg), AND, reg,
			     GEN_INT ((((HOST_WIDE_INT) 1
					<< GET_MODE_BITSIZE (m->savemode)))
				      - 1),
			     reg, 1, OPTAB_LIB_WIDEN);
			  if (tem == 0)
			    abort ();
			  if (tem != reg)
			    emit_move_insn (reg, tem);
			  sequence = get_insns ();
			  end_sequence ();
			  i1 = loop_insn_hoist (loop, sequence);
			}
		      else if (CALL_P (p))
			{
			  i1 = loop_call_insn_hoist (loop, PATTERN (p));
			  /* Because the USAGE information potentially
			     contains objects other than hard registers
			     we need to copy it.  */
			  if (CALL_INSN_FUNCTION_USAGE (p))
			    CALL_INSN_FUNCTION_USAGE (i1)
			      = copy_rtx (CALL_INSN_FUNCTION_USAGE (p));
			}
		      else if (count == m->consec && m->move_insn_first)
			{
			  rtx seq;
			  /* The SET_SRC might not be invariant, so we must
			     use the REG_EQUAL note.  */
			  start_sequence ();
			  emit_move_insn (m->insert_temp ? newreg : m->set_dest,
					  m->set_src);
			  seq = get_insns ();
			  end_sequence ();

			  add_label_notes (m->set_src, seq);

			  i1 = loop_insn_hoist (loop, seq);
			  if (! find_reg_note (i1, REG_EQUAL, NULL_RTX))
			    set_unique_reg_note (i1, m->is_equiv ? REG_EQUIV
						     : REG_EQUAL, m->set_src);
			}
		      else if (m->insert_temp)
			{
			  rtx *reg_map2 = xcalloc (REGNO (newreg),
						   sizeof(rtx));
			  reg_map2 [m->regno] = newreg;

			  i1 = loop_insn_hoist (loop, copy_rtx (PATTERN (p)));
			  replace_regs (i1, reg_map2, REGNO (newreg), 1);
			  free (reg_map2);
			}
		      else
			i1 = loop_insn_hoist (loop, PATTERN (p));

		      if (REG_NOTES (i1) == 0)
			{
			  REG_NOTES (i1) = REG_NOTES (p);
			  REG_NOTES (p) = NULL;

			  /* If there is a REG_EQUAL note present whose value
			     is not loop invariant, then delete it, since it
			     may cause problems with later optimization passes.
			     It is possible for cse to create such notes
			     like this as a result of record_jump_cond.  */

			  if ((temp = find_reg_note (i1, REG_EQUAL, NULL_RTX))
			      && ! loop_invariant_p (loop, XEXP (temp, 0)))
			    remove_note (i1, temp);
			}

		      if (new_start == 0)
			new_start = i1;

		      if (loop_dump_stream)
			fprintf (loop_dump_stream, " moved to %d",
				 INSN_UID (i1));

		      /* If library call, now fix the REG_NOTES that contain
			 insn pointers, namely REG_LIBCALL on FIRST
			 and REG_RETVAL on I1.  */
		      if ((temp = find_reg_note (i1, REG_RETVAL, NULL_RTX)))
			{
			  XEXP (temp, 0) = first;
			  temp = find_reg_note (first, REG_LIBCALL, NULL_RTX);
			  XEXP (temp, 0) = i1;
			}

		      temp = p;
		      delete_insn (p);
		      p = NEXT_INSN (p);

		      /* simplify_giv_expr expects that it can walk the insns
			 at m->insn forwards and see this old sequence we are
			 tossing here.  delete_insn does preserve the next
			 pointers, but when we skip over a NOTE we must fix
			 it up.  Otherwise that code walks into the non-deleted
			 insn stream.  */
		      while (p && NOTE_P (p))
			p = NEXT_INSN (temp) = NEXT_INSN (p);

		      if (m->insert_temp)
			{
			  rtx seq;
			  /* Replace the original insn with a move from
			     our newly created temp.  */
			  start_sequence ();
			  emit_move_insn (m->set_dest, newreg);
			  seq = get_insns ();
			  end_sequence ();
			  emit_insn_before (seq, p);
			}
		    }

		  /* The more regs we move, the less we like moving them.  */
		  threshold -= 3;
		}

	      m->done = 1;

	      if (!m->insert_temp)
		{
		  /* Any other movable that loads the same register
		     MUST be moved.  */
		  already_moved[regno] = 1;

		  /* This reg has been moved out of one loop.  */
		  regs->array[regno].moved_once = 1;

		  /* The reg set here is now invariant.  */
		  if (! m->partial)
		    {
		      int i;
		      for (i = 0; i < LOOP_REGNO_NREGS (regno, m->set_dest); i++)
			regs->array[regno+i].set_in_loop = 0;
		    }

		  /* Change the length-of-life info for the register
		     to say it lives at least the full length of this loop.
		     This will help guide optimizations in outer loops.  */

		  if (REGNO_FIRST_LUID (regno) > INSN_LUID (loop_start))
		    /* This is the old insn before all the moved insns.
		       We can't use the moved insn because it is out of range
		       in uid_luid.  Only the old insns have luids.  */
		    REGNO_FIRST_UID (regno) = INSN_UID (loop_start);
		  if (REGNO_LAST_LUID (regno) < INSN_LUID (loop_end))
		    REGNO_LAST_UID (regno) = INSN_UID (loop_end);
		}

	      /* Combine with this moved insn any other matching movables.  */

	      if (! m->partial)
		for (m1 = movables->head; m1; m1 = m1->next)
		  if (m1->match == m)
		    {
		      rtx temp;

		      /* Schedule the reg loaded by M1
			 for replacement so that shares the reg of M.
			 If the modes differ (only possible in restricted
			 circumstances, make a SUBREG.

			 Note this assumes that the target dependent files
			 treat REG and SUBREG equally, including within
			 GO_IF_LEGITIMATE_ADDRESS and in all the
			 predicates since we never verify that replacing the
			 original register with a SUBREG results in a
			 recognizable insn.  */
		      if (GET_MODE (m->set_dest) == GET_MODE (m1->set_dest))
			reg_map[m1->regno] = m->set_dest;
		      else
			reg_map[m1->regno]
			  = gen_lowpart_common (GET_MODE (m1->set_dest),
						m->set_dest);

		      /* Get rid of the matching insn
			 and prevent further processing of it.  */
		      m1->done = 1;

		      /* If library call, delete all insns.  */
		      if ((temp = find_reg_note (m1->insn, REG_RETVAL,
						 NULL_RTX)))
			delete_insn_chain (XEXP (temp, 0), m1->insn);
		      else
		        delete_insn (m1->insn);

		      /* Any other movable that loads the same register
			 MUST be moved.  */
		      already_moved[m1->regno] = 1;

		      /* The reg merged here is now invariant,
			 if the reg it matches is invariant.  */
		      if (! m->partial)
			{
			  int i;
			  for (i = 0;
			       i < LOOP_REGNO_NREGS (regno, m1->set_dest);
			       i++)
			    regs->array[m1->regno+i].set_in_loop = 0;
			}
		    }
	    }
	  else if (loop_dump_stream)
	    fprintf (loop_dump_stream, "not desirable");
	}
      else if (loop_dump_stream && !m->match)
	fprintf (loop_dump_stream, "not safe");

      if (loop_dump_stream)
	fprintf (loop_dump_stream, "\n");
    }

  if (new_start == 0)
    new_start = loop_start;

  /* Go through all the instructions in the loop, making
     all the register substitutions scheduled in REG_MAP.  */
  for (p = new_start; p != loop_end; p = NEXT_INSN (p))
    if (INSN_P (p))
      {
	replace_regs (PATTERN (p), reg_map, nregs, 0);
	replace_regs (REG_NOTES (p), reg_map, nregs, 0);
	INSN_CODE (p) = -1;
      }

  /* Clean up.  */
  free (reg_map);
  free (already_moved);
}


static void
loop_movables_add (struct loop_movables *movables, struct movable *m)
{
  if (movables->head == 0)
    movables->head = m;
  else
    movables->last->next = m;
  movables->last = m;
}


static void
loop_movables_free (struct loop_movables *movables)
{
  struct movable *m;
  struct movable *m_next;

  for (m = movables->head; m; m = m_next)
    {
      m_next = m->next;
      free (m);
    }
}

#if 0
/* Scan X and replace the address of any MEM in it with ADDR.
   REG is the address that MEM should have before the replacement.  */

static void
replace_call_address (rtx x, rtx reg, rtx addr)
{
  enum rtx_code code;
  int i;
  const char *fmt;

  if (x == 0)
    return;
  code = GET_CODE (x);
  switch (code)
    {
    case PC:
    case CC0:
    case CONST_INT:
    case CONST_DOUBLE:
    case CONST:
    case SYMBOL_REF:
    case LABEL_REF:
    case REG:
      return;

    case SET:
      /* Short cut for very common case.  */
      replace_call_address (XEXP (x, 1), reg, addr);
      return;

    case CALL:
      /* Short cut for very common case.  */
      replace_call_address (XEXP (x, 0), reg, addr);
      return;

    case MEM:
      /* If this MEM uses a reg other than the one we expected,
	 something is wrong.  */
      if (XEXP (x, 0) != reg)
	abort ();
      XEXP (x, 0) = addr;
      return;

    default:
      break;
    }

  fmt = GET_RTX_FORMAT (code);
  for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
    {
      if (fmt[i] == 'e')
	replace_call_address (XEXP (x, i), reg, addr);
      else if (fmt[i] == 'E')
	{
	  int j;
	  for (j = 0; j < XVECLEN (x, i); j++)
	    replace_call_address (XVECEXP (x, i, j), reg, addr);
	}
    }
}
#endif

/* Return the number of memory refs to addresses that vary
   in the rtx X.  */

static int
count_nonfixed_reads (const struct loop *loop, rtx x)
{
  enum rtx_code code;
  int i;
  const char *fmt;
  int value;

  if (x == 0)
    return 0;

  code = GET_CODE (x);
  switch (code)
    {
    case PC:
    case CC0:
    case CONST_INT:
    case CONST_DOUBLE:
    case CONST:
    case SYMBOL_REF:
    case LABEL_REF:
    case REG:
      return 0;

    case MEM:
      return ((loop_invariant_p (loop, XEXP (x, 0)) != 1)
	      + count_nonfixed_reads (loop, XEXP (x, 0)));

    default:
      break;
    }

  value = 0;
  fmt = GET_RTX_FORMAT (code);
  for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
    {
      if (fmt[i] == 'e')
	value += count_nonfixed_reads (loop, XEXP (x, i));
      if (fmt[i] == 'E')
	{
	  int j;
	  for (j = 0; j < XVECLEN (x, i); j++)
	    value += count_nonfixed_reads (loop, XVECEXP (x, i, j));
	}
    }
  return value;
}

/* Scan a loop setting the elements `loops_enclosed',
   `has_call', `has_nonconst_call', `has_volatile', `has_tablejump',
   `unknown_address_altered', `unknown_constant_address_altered', and
   `num_mem_sets' in LOOP.  Also, fill in the array `mems' and the
   list `store_mems' in LOOP.  */

static void
prescan_loop (struct loop *loop)
{
  int level = 1;
  rtx insn;
  struct loop_info *loop_info = LOOP_INFO (loop);
  rtx start = loop->start;
  rtx end = loop->end;
  /* The label after END.  Jumping here is just like falling off the
     end of the loop.  We use next_nonnote_insn instead of next_label
     as a hedge against the (pathological) case where some actual insn
     might end up between the two.  */
  rtx exit_target = next_nonnote_insn (end);

  loop_info->has_indirect_jump = indirect_jump_in_function;
  loop_info->pre_header_has_call = 0;
  loop_info->has_call = 0;
  loop_info->has_nonconst_call = 0;
  loop_info->has_prefetch = 0;
  loop_info->has_volatile = 0;
  loop_info->has_tablejump = 0;
  loop_info->has_multiple_exit_targets = 0;
  loop->level = 1;

  loop_info->unknown_address_altered = 0;
  loop_info->unknown_constant_address_altered = 0;
  loop_info->store_mems = NULL_RTX;
  loop_info->first_loop_store_insn = NULL_RTX;
  loop_info->mems_idx = 0;
  loop_info->num_mem_sets = 0;

  for (insn = start; insn && !LABEL_P (insn);
       insn = PREV_INSN (insn))
    {
      if (CALL_P (insn))
	{
	  loop_info->pre_header_has_call = 1;
	  break;
	}
    }

  for (insn = NEXT_INSN (start); insn != NEXT_INSN (end);
       insn = NEXT_INSN (insn))
    {
      switch (GET_CODE (insn))
	{
	case NOTE:
	  if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_BEG)
	    {
	      ++level;
	      /* Count number of loops contained in this one.  */
	      loop->level++;
	    }
	  else if (NOTE_LINE_NUMBER (insn) == NOTE_INSN_LOOP_END)
	    --level;
	  break;

	case CALL_INSN:
	  if (! CONST_OR_PURE_CALL_P (insn))
	    {
	      loop_info->unknown_address_altered = 1;
	      loop_info->has_nonconst_call = 1;
	    }
	  else if (pure_call_p (insn))
	    loop_info->has_nonconst_call = 1;
	  loop_info->has_call = 1;
	  if (can_throw_internal (insn))
	    loop_info->has_multiple_exit_targets = 1;
	  break;

	case JUMP_INSN:
	  if (! loop_info->has_multiple_exit_targets)
	    {
	      rtx set = pc_set (insn);

	      if (set)
		{
		  rtx src = SET_SRC (set);
		  rtx label1, label2;

		  if (GET_CODE (src) == IF_THEN_ELSE)
		    {
		      label1 = XEXP (src, 1);
		      label2 = XEXP (src, 2);
		    }
		  else
		    {
		      label1 = src;
		      label2 = NULL_RTX;
		    }

		  do
		    {
		      if (label1 && label1 != pc_rtx)
			{
			  if (GET_CODE (label1) != LABEL_REF)
			    {
			      /* Something tricky.  */
			      loop_info->has_multiple_exit_targets = 1;
			      break;
			    }
			  else if (XEXP (label1, 0) != exit_target
				   && LABEL_OUTSIDE_LOOP_P (label1))
			    {
			      /* A jump outside the current loop.  */
			      loop_info->has_multiple_exit_targets = 1;
			      break;
			    }
			}

		      label1 = label2;
		      label2 = NULL_RTX;
		    }
		  while (label1);
		}
	      else
		{
		  /* A return, or something tricky.  */
		  loop_info->has_multiple_exit_targets = 1;
		}
	    }
	  /* Fall through.  */

	case INSN:
	  if (volatile_refs_p (PATTERN (insn)))
	    loop_info->has_volatile = 1;

	  if (JUMP_P (insn)
	      && (GET_CODE (PATTERN (insn)) == ADDR_DIFF_VEC
		  || GET_CODE (PATTERN (insn)) == ADDR_VEC))
	    loop_info->has_tablejump = 1;

	  note_stores (PATTERN (insn), note_addr_stored, loop_info);
	  if (! loop_info->first_loop_store_insn && loop_info->store_mems)
	    loop_info->first_loop_store_insn = insn;

	  if (flag_non_call_exceptions && can_throw_internal (insn))
	    loop_info->has_multiple_exit_targets = 1;
	  break;

	default:
	  break;
	}
    }

  /* Now, rescan the loop, setting up the LOOP_MEMS array.  */
  if (/* An exception thrown by a called function might land us
	 anywhere.  */
      ! loop_info->has_nonconst_call
      /* We don't want loads for MEMs moved to a location before the
	 one at which their stack memory becomes allocated.  (Note
	 that this is not a problem for malloc, etc., since those
	 require actual function calls.  */
      && ! current_function_calls_alloca
      /* There are ways to leave the loop other than falling off the
	 end.  */
      && ! loop_info->has_multiple_exit_targets)
    for (insn = NEXT_INSN (start); insn != NEXT_INSN (end);
	 insn = NEXT_INSN (insn))
      for_each_rtx (&insn, insert_loop_mem, loop_info);

  /* BLKmode MEMs are added to LOOP_STORE_MEM as necessary so
     that loop_invariant_p and load_mems can use true_dependence
     to determine what is really clobbered.  */
  if (loop_info->unknown_address_altered)
    {
      rtx mem = gen_rtx_MEM (BLKmode, const0_rtx);

      loop_info->store_mems
	= gen_rtx_EXPR_LIST (VOIDmode, mem, loop_info->store_mems);
    }
  if (loop_info->unknown_constant_address_altered)
    {
      rtx mem = gen_rtx_MEM (BLKmode, const0_rtx);
      MEM_READONLY_P (mem) = 1;
      loop_info->store_mems
	= gen_rtx_EXPR_LIST (VOIDmode, mem, loop_info->store_mems);
    }
}

/* Invalidate all loops containing LABEL.  */

static void
invalidate_loops_containing_label (rtx label)
{
  struct loop *loop;
  for (loop = uid_loop[INSN_UID (label)]; loop; loop = loop->outer)
    loop->invalid = 1;
}

/* Scan the function looking for loops.  Record the start and end of each loop.
   Also mark as invalid loops any loops that contain a setjmp or are branched
   to from outside the loop.  */

static void
find_and_verify_loops (rtx f, struct loops *loops)
{
  rtx insn;
  rtx label;
  int num_loops;
  struct loop *current_loop;
  struct loop *next_loop;
  struct loop *loop;

  num_loops = loops->num;

  compute_luids (f, NULL_RTX, 0);

  /* If there are jumps to undefined labels,
     treat them as jumps out of any/all loops.
     This also avoids writing past end of tables when there are no loops.  */
  uid_loop[0] = NULL;

  /* Find boundaries of loops, mark which loops are contained within
     loops, and invalidate loops that have setjmp.  */

  num_loops = 0;
  current_loop = NULL;
  for (insn = f; insn; insn = NEXT_INSN (insn))
    {
      if (NOTE_P (insn))
	switch (NOTE_LINE_NUMBER (insn))
	  {
	  case NOTE_INSN_LOOP_BEG:
	    next_loop = loops->array + num_loops;
	    next_loop->num = num_loops;
	    num_loops++;
	    next_loop->start = insn;
	    next_loop->outer = current_loop;
	    current_loop = next_loop;
	    break;

	  case NOTE_INSN_LOOP_END:
	    if (! current_loop)
	      abort ();

	    current_loop->end = insn;
	    current_loop = current_loop->outer;
	    break;

	  default:
	    break;
	  }

      if (CALL_P (insn)
	  && find_reg_note (insn, REG_SETJMP, NULL))
	{
	  /* In this case, we must invalidate our current loop and any
	     enclosing loop.  */
	  for (loop = current_loop; loop; loop = loop->outer)
	    {
	      loop->invalid = 1;
	      if (loop_dump_stream)
		fprintf (loop_dump_stream,
			 "\nLoop at %d ignored due to setjmp.\n",
			 INSN_UID (loop->start));
	    }
	}

      /* Note that this will mark the NOTE_INSN_LOOP_END note as being in the
	 enclosing loop, but this doesn't matter.  */
      uid_loop[INSN_UID (insn)] = current_loop;
    }

  /* Any loop containing a label used in an initializer must be invalidated,
     because it can be jumped into from anywhere.  */
  for (label = forced_labels; label; label = XEXP (label, 1))
    invalidate_loops_containing_label (XEXP (label, 0));

  /* Any loop containing a label used for an exception handler must be
     invalidated, because it can be jumped into from anywhere.  */
  for_each_eh_label (invalidate_loops_containing_label);

  /* Now scan all insn's in the function.  If any JUMP_INSN branches into a
     loop that it is not contained within, that loop is marked invalid.
     If any INSN or CALL_INSN uses a label's address, then the loop containing
     that label is marked invalid, because it could be jumped into from
     anywhere.

     Also look for blocks of code ending in an unconditional branch that
     exits the loop.  If such a block is surrounded by a conditional
     branch around the block, move the block elsewhere (see below) and
     invert the jump to point to the code block.  This may eliminate a
     label in our loop and will simplify processing by both us and a
     possible second cse pass.  */

  for (insn = f; insn; insn = NEXT_INSN (insn))
    if (INSN_P (insn))
      {
	struct loop *this_loop = uid_loop[INSN_UID (insn)];

	if (NONJUMP_INSN_P (insn) || CALL_P (insn))
	  {
	    rtx note = find_reg_note (insn, REG_LABEL, NULL_RTX);
	    if (note)
	      invalidate_loops_containing_label (XEXP (note, 0));
	  }

	if (!JUMP_P (insn))
	  continue;

	mark_loop_jump (PATTERN (insn), this_loop);

	/* See if this is an unconditional branch outside the loop.  */
	if (this_loop
	    && (GET_CODE (PATTERN (insn)) == RETURN
		|| (any_uncondjump_p (insn)
		    && onlyjump_p (insn)
		    && (uid_loop[INSN_UID (JUMP_LABEL (insn))]
			!= this_loop)))
	    && get_max_uid () < max_uid_for_loop)
	  {
	    rtx p;
	    rtx our_next = next_real_insn (insn);
	    rtx last_insn_to_move = NEXT_INSN (insn);
	    struct loop *dest_loop;
	    struct loop *outer_loop = NULL;

	    /* Go backwards until we reach the start of the loop, a label,
	       or a JUMP_INSN.  */
	    for (p = PREV_INSN (insn);
		 !LABEL_P (p)
		 && ! (NOTE_P (p)
		       && NOTE_LINE_NUMBER (p) == NOTE_INSN_LOOP_BEG)
		 && !JUMP_P (p);
		 p = PREV_INSN (p))
	      ;

	    /* Check for the case where we have a jump to an inner nested
	       loop, and do not perform the optimization in that case.  */

	    if (JUMP_LABEL (insn))
	      {
		dest_loop = uid_loop[INSN_UID (JUMP_LABEL (insn))];
		if (dest_loop)
		  {
		    for (outer_loop = dest_loop; outer_loop;
			 outer_loop = outer_loop->outer)
		      if (outer_loop == this_loop)
			break;
		  }
	      }

	    /* Make sure that the target of P is within the current loop.  */

	    if (JUMP_P (p) && JUMP_LABEL (p)
		&& uid_loop[INSN_UID (JUMP_LABEL (p))] != this_loop)
	      outer_loop = this_loop;

	    /* If we stopped on a JUMP_INSN to the next insn after INSN,
	       we have a block of code to try to move.

	       We look backward and then forward from the target of INSN
	       to find a BARRIER at the same loop depth as the target.
	       If we find such a BARRIER, we make a new label for the start
	       of the block, invert the jump in P and point it to that label,
	       and move the block of code to the spot we found.  */

	    if (! outer_loop
		&& JUMP_P (p)
		&& JUMP_LABEL (p) != 0
		/* Just ignore jumps to labels that were never emitted.
		   These always indicate compilation errors.  */
		&& INSN_UID (JUMP_LABEL (p)) != 0
		&& any_condjump_p (p) && onlyjump_p (p)
		&& next_real_insn (JUMP_LABEL (p)) == our_next
		/* If it's not safe to move the sequence, then we
		   mustn't try.  */
		&& insns_safe_to_move_p (p, NEXT_INSN (insn),
					 &last_insn_to_move))
	      {
		rtx target
		  = JUMP_LABEL (insn) ? JUMP_LABEL (insn) : get_last_insn ();
		struct loop *target_loop = uid_loop[INSN_UID (target)];
		rtx loc, loc2;
		rtx tmp;

		/* Search for possible garbage past the conditional jumps
		   and look for the last barrier.  */
		for (tmp = last_insn_to_move;
		     tmp && !LABEL_P (tmp); tmp = NEXT_INSN (tmp))
		  if (BARRIER_P (tmp))
		    last_insn_to_move = tmp;

		for (loc = target; loc; loc = PREV_INSN (loc))
		  if (BARRIER_P (loc)
		      /* Don't move things inside a tablejump.  */
		      && ((loc2 = next_nonnote_insn (loc)) == 0
			  || !LABEL_P (loc2)
			  || (loc2 = next_nonnote_insn (loc2)) == 0
			  || !JUMP_P (loc2)
			  || (GET_CODE (PATTERN (loc2)) != ADDR_VEC
			      && GET_CODE (PATTERN (loc2)) != ADDR_DIFF_VEC))
		      && uid_loop[INSN_UID (loc)] == target_loop)
		    break;

		if (loc == 0)
		  for (loc = target; loc; loc = NEXT_INSN (loc))
		    if (BARRIER_P (loc)
			/* Don't move things inside a tablejump.  */
			&& ((loc2 = next_nonnote_insn (loc)) == 0
			    || !LABEL_P (loc2)
			    || (loc2 = next_nonnote_insn (loc2)) == 0
			    || !JUMP_P (loc2)
			    || (GET_CODE (PATTERN (loc2)) != ADDR_VEC
				&& GET_CODE (PATTERN (loc2)) != ADDR_DIFF_VEC))
			&& uid_loop[INSN_UID (loc)] == target_loop)
		      break;

		if (loc)
		  {
		    rtx cond_label = JUMP_LABEL (p);
		    rtx new_label = get_label_after (p);

		    /* Ensure our label doesn't go away.  */
		    LABEL_NUSES (cond_label)++;

		    /* Verify that uid_loop is large enough and that
		       we can invert P.  */
		    if (invert_jump (p, new_label, 1))
		      {
			rtx q, r;

			/* If no suitable BARRIER was found, create a suitable
			   one before TARGET.  Since TARGET is a fall through
			   path, we'll need to insert a jump around our block
			   and add a BARRIER before TARGET.

			   This creates an extra unconditional jump outside
			   the loop.  However, the benefits of removing rarely
			   executed instructions from inside the loop usually
			   outweighs the cost of the extra unconditional jump
			   outside the loop.  */
			if (loc == 0)
			  {
			    rtx temp;

			    temp = gen_jump (JUMP_LABEL (insn));
			    temp = emit_jump_insn_before (temp, target);
			    JUMP_LABEL (temp) = JUMP_LABEL (insn);
			    LABEL_NUSES (JUMP_LABEL (insn))++;
			    loc = emit_barrier_before (target);
			  }

			/* Include the BARRIER after INSN and copy the
			   block after LOC.  */
			if (squeeze_notes (&new_label, &last_insn_to_move))
			  abort ();
			reorder_insns (new_label, last_insn_to_move, loc);

			/* All those insns are now in TARGET_LOOP.  */
			for (q = new_label;
			     q != NEXT_INSN (last_insn_to_move);
			     q = NEXT_INSN (q))
			  uid_loop[INSN_UID (q)] = target_loop;

			/* The label jumped to by INSN is no longer a loop
			   exit.  Unless INSN does not have a label (e.g.,
			   it is a RETURN insn), search loop->exit_labels
			   to find its label_ref, and remove it.  Also turn
			   off LABEL_OUTSIDE_LOOP_P bit.  */
			if (JUMP_LABEL (insn))
			  {
			    for (q = 0, r = this_loop->exit_labels;
				 r;
				 q = r, r = LABEL_NEXTREF (r))
			      if (XEXP (r, 0) == JUMP_LABEL (insn))
				{
				  LABEL_OUTSIDE_LOOP_P (r) = 0;
				  if (q)
				    LABEL_NEXTREF (q) = LABEL_NEXTREF (r);
				  else
				    this_loop->exit_labels = LABEL_NEXTREF (r);
				  break;
				}

			    for (loop = this_loop; loop && loop != target_loop;
				 loop = loop->outer)
			      loop->exit_count--;

			    /* If we didn't find it, then something is
			       wrong.  */
			    if (! r)
			      abort ();
			  }

			/* P is now a jump outside the loop, so it must be put
			   in loop->exit_labels, and marked as such.
			   The easiest way to do this is to just call
			   mark_loop_jump again for P.  */
			mark_loop_jump (PATTERN (p), this_loop);

			/* If INSN now jumps to the insn after it,
			   delete INSN.  */
			if (JUMP_LABEL (insn) != 0
			    && (next_real_insn (JUMP_LABEL (insn))
				== next_real_insn (insn)))
			  delete_related_insns (insn);
		      }

		    /* Continue the loop after where the conditional
		       branch used to jump, since the only branch insn
		       in the block (if it still remains) is an inter-loop
		       branch and hence needs no processing.  */
		    insn = NEXT_INSN (cond_label);

		    if (--LABEL_NUSES (cond_label) == 0)
		      delete_related_insns (cond_label);

		    /* This loop will be continued with NEXT_INSN (insn).  */
		    insn = PREV_INSN (insn);
		  }
	      }
	  }
      }
}

/* If any label in X jumps to a loop different from LOOP_NUM and any of the
   loops it is contained in, mark the target loop invalid.

   For speed, we assume that X is part of a pattern of a JUMP_INSN.  */

static void
mark_loop_jump (rtx x, struct loop *loop)
{
  struct loop *dest_loop;
  struct loop *outer_loop;
  int i;

  switch (GET_CODE (x))
    {
    case PC:
    case USE:
    case CLOBBER:
    case REG:
    case MEM:
    case CONST_INT:
    case CONST_DOUBLE:
    case RETURN:
      return;

    case CONST:
      /* There could be a label reference in here.  */
      mark_loop_jump (XEXP (x, 0), loop);
      return;

    case PLUS:
    case MINUS:
    case MULT:
      mark_loop_jump (XEXP (x, 0), loop);
      mark_loop_jump (XEXP (x, 1), loop);
      return;

    case LO_SUM:
      /* This may refer to a LABEL_REF or SYMBOL_REF.  */
      mark_loop_jump (XEXP (x, 1), loop);
      return;

    case SIGN_EXTEND:
    case ZERO_EXTEND:
      mark_loop_jump (XEXP (x, 0), loop);
      return;

    case LABEL_REF:
      dest_loop = uid_loop[INSN_UID (XEXP (x, 0))];

      /* Link together all labels that branch outside the loop.  This
	 is used by final_[bg]iv_value and the loop unrolling code.  Also
	 mark this LABEL_REF so we know that this branch should predict
	 false.  */

      /* A check to make sure the label is not in an inner nested loop,
	 since this does not count as a loop exit.  */
      if (dest_loop)
	{
	  for (outer_loop = dest_loop; outer_loop;
	       outer_loop = outer_loop->outer)
	    if (outer_loop == loop)
	      break;
	}
      else
	outer_loop = NULL;

      if (loop && ! outer_loop)
	{
	  LABEL_OUTSIDE_LOOP_P (x) = 1;
	  LABEL_NEXTREF (x) = loop->exit_labels;
	  loop->exit_labels = x;

	  for (outer_loop = loop;
	       outer_loop && outer_loop != dest_loop;
	       outer_loop = outer_loop->outer)
	    outer_loop->exit_count++;
	}

      /* If this is inside a loop, but not in the current loop or one enclosed
	 by it, it invalidates at least one loop.  */

      if (! dest_loop)
	return;

      /* We must invalidate every nested loop containing the target of this
	 label, except those that also contain the jump insn.  */

      for (; dest_loop; dest_loop = dest_loop->outer)
	{
	  /* Stop when we reach a loop that also contains the jump insn.  */
	  for (outer_loop = loop; outer_loop; outer_loop = outer_loop->outer)
	    if (dest_loop == outer_loop)
	      return;

	  /* If we get here, we know we need to invalidate a loop.  */
	  if (loop_dump_stream && ! dest_loop->invalid)
	    fprintf (loop_dump_stream,
		     "\nLoop at %d ignored due to multiple entry points.\n",
		     INSN_UID (dest_loop->start));

	  dest_loop->invalid = 1;
	}
      return;

    case SET:
      /* If this is not setting pc, ignore.  */
      if (SET_DEST (x) == pc_rtx)
	mark_loop_jump (SET_SRC (x), loop);
      return;

    case IF_THEN_ELSE:
      mark_loop_jump (XEXP (x, 1), loop);
      mark_loop_jump (XEXP (x, 2), loop);
      return;

    case PARALLEL:
    case ADDR_VEC:
      for (i = 0; i < XVECLEN (x, 0); i++)
	mark_loop_jump (XVECEXP (x, 0, i), loop);
      return;

    case ADDR_DIFF_VEC:
      for (i = 0; i < XVECLEN (x, 1); i++)
	mark_loop_jump (XVECEXP (x, 1, i), loop);
      return;

    default:
      /* Strictly speaking this is not a jump into the loop, only a possible
	 jump out of the loop.  However, we have no way to link the destination
	 of this jump onto the list of exit labels.  To be safe we mark this
	 loop and any containing loops as invalid.  */
      if (loop)
	{
	  for (outer_loop = loop; outer_loop; outer_loop = outer_loop->outer)
	    {
	      if (loop_dump_stream && ! outer_loop->invalid)
		fprintf (loop_dump_stream,
			 "\nLoop at %d ignored due to unknown exit jump.\n",
			 INSN_UID (outer_loop->start));
	      outer_loop->invalid = 1;
	    }
	}
      return;
    }
}

/* Return nonzero if there is a label in the range from
   insn INSN to and including the insn whose luid is END
   INSN must have an assigned luid (i.e., it must not have
   been previously created by loop.c).  */

static int
labels_in_range_p (rtx insn, int end)
{
  while (insn && INSN_LUID (insn) <= end)
    {
      if (LABEL_P (insn))
	return 1;
      insn = NEXT_INSN (insn);
    }

  return 0;
}

/* Record that a memory reference X is being set.  */

static void
note_addr_stored (rtx x, rtx y ATTRIBUTE_UNUSED,
		  void *data ATTRIBUTE_UNUSED)
{
  struct loop_info *loop_info = data;

  if (x == 0 || !MEM_P (x))
    return;

  /* Count number of memory writes.
     This affects heuristics in strength_reduce.  */
  loop_info->num_mem_sets++;

  /* BLKmode MEM means all memory is clobbered.  */
  if (GET_MODE (x) == BLKmode)
    {
      if (MEM_READONLY_P (x))
	loop_info->unknown_constant_address_altered = 1;
      else
	loop_info->unknown_address_altered = 1;

      return;
    }

  loop_info->store_mems = gen_rtx_EXPR_LIST (VOIDmode, x,
					     loop_info->store_mems);
}

/* X is a value modified by an INSN that references a biv inside a loop
   exit test (i.e., X is somehow related to the value of the biv).  If X
   is a pseudo that is used more than once, then the biv is (effectively)
   used more than once.  DATA is a pointer to a loop_regs structure.  */

static void
note_set_pseudo_multiple_uses (rtx x, rtx y ATTRIBUTE_UNUSED, void *data)
{
  struct loop_regs *regs = (struct loop_regs *) data;

  if (x == 0)
    return;

  while (GET_CODE (x) == STRICT_LOW_PART
	 || GET_CODE (x) == SIGN_EXTRACT
	 || GET_CODE (x) == ZERO_EXTRACT
	 || GET_CODE (x) == SUBREG)
    x = XEXP (x, 0);

  if (!REG_P (x) || REGNO (x) < FIRST_PSEUDO_REGISTER)
    return;

  /* If we do not have usage information, or if we know the register
     is used more than once, note that fact for check_dbra_loop.  */
  if (REGNO (x) >= max_reg_before_loop
      || ! regs->array[REGNO (x)].single_usage
      || regs->array[REGNO (x)].single_usage == const0_rtx)
    regs->multiple_uses = 1;
}

/* Return nonzero if the rtx X is invariant over the current loop.

   The value is 2 if we refer to something only conditionally invariant.

   A memory ref is invariant if it is not volatile and does not conflict
   with anything stored in `loop_info->store_mems'.  */

static int
loop_invariant_p (const struct loop *loop, rtx x)
{
  struct loop_info *loop_info = LOOP_INFO (loop);
  struct loop_regs *regs = LOOP_REGS (loop);
  int i;
  enum rtx_code code;
  const char *fmt;
  int conditional = 0;
  rtx mem_list_entry;

  if (x == 0)
    return 1;
  code = GET_CODE (x);
  switch (code)
    {
    case CONST_INT:
    case CONST_DOUBLE:
    case SYMBOL_REF:
    case CONST:
      return 1;

    case LABEL_REF:
      return 1;

    case PC:
    case CC0:
    case UNSPEC_VOLATILE:
      return 0;

    case REG:
      if ((x == frame_pointer_rtx || x == hard_frame_pointer_rtx
	   || x == arg_pointer_rtx || x == pic_offset_table_rtx)
	  && ! current_function_has_nonlocal_goto)
	return 1;

      if (LOOP_INFO (loop)->has_call
	  && REGNO (x) < FIRST_PSEUDO_REGISTER && call_used_regs[REGNO (x)])
	return 0;

      /* Out-of-range regs can occur when we are called from unrolling.
	 These registers created by the unroller are set in the loop,
	 hence are never invariant.
	 Other out-of-range regs can be generated by load_mems; those that
	 are written to in the loop are not invariant, while those that are
	 not written to are invariant.  It would be easy for load_mems
	 to set n_times_set correctly for these registers, however, there
	 is no easy way to distinguish them from registers created by the
	 unroller.  */

      if (REGNO (x) >= (unsigned) regs->num)
	return 0;

      if (regs->array[REGNO (x)].set_in_loop < 0)
	return 2;

      return regs->array[REGNO (x)].set_in_loop == 0;

    case MEM:
      /* Volatile memory references must be rejected.  Do this before
	 checking for read-only items, so that volatile read-only items
	 will be rejected also.  */
      if (MEM_VOLATILE_P (x))
	return 0;

      /* See if there is any dependence between a store and this load.  */
      mem_list_entry = loop_info->store_mems;
      while (mem_list_entry)
	{
	  if (true_dependence (XEXP (mem_list_entry, 0), VOIDmode,
			       x, rtx_varies_p))
	    return 0;

	  mem_list_entry = XEXP (mem_list_entry, 1);
	}

      /* It's not invalidated by a store in memory
	 but we must still verify the address is invariant.  */
      break;

    case ASM_OPERANDS:
      /* Don't mess with insns declared volatile.  */
      if (MEM_VOLATILE_P (x))
	return 0;
      break;

    default:
      break;
    }

  fmt = GET_RTX_FORMAT (code);
  for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
    {
      if (fmt[i] == 'e')
	{
	  int tem = loop_invariant_p (loop, XEXP (x, i));
	  if (tem == 0)
	    return 0;
	  if (tem == 2)
	    conditional = 1;
	}
      else if (fmt[i] == 'E')
	{
	  int j;
	  for (j = 0; j < XVECLEN (x, i); j++)
	    {
	      int tem = loop_invariant_p (loop, XVECEXP (x, i, j));
	      if (tem == 0)
		return 0;
	      if (tem == 2)
		conditional = 1;
	    }

	}
    }

  return 1 + conditional;
}

/* Return nonzero if all the insns in the loop that set REG
   are INSN and the immediately following insns,
   and if each of those insns sets REG in an invariant way
   (not counting uses of REG in them).

   The value is 2 if some of these insns are only conditionally invariant.

   We assume that INSN itself is the first set of REG
   and that its source is invariant.  */

static int
consec_sets_invariant_p (const struct loop *loop, rtx reg, int n_sets,
			 rtx insn)
{
  struct loop_regs *regs = LOOP_REGS (loop);
  rtx p = insn;
  unsigned int regno = REGNO (reg);
  rtx temp;
  /* Number of sets we have to insist on finding after INSN.  */
  int count = n_sets - 1;
  int old = regs->array[regno].set_in_loop;
  int value = 0;
  int this;

  /* If N_SETS hit the limit, we can't rely on its value.  */
  if (n_sets == 127)
    return 0;

  regs->array[regno].set_in_loop = 0;

  while (count > 0)
    {
      enum rtx_code code;
      rtx set;

      p = NEXT_INSN (p);
      code = GET_CODE (p);

      /* If library call, skip to end of it.  */
      if (code == INSN && (temp = find_reg_note (p, REG_LIBCALL, NULL_RTX)))
	p = XEXP (temp, 0);

      this = 0;
      if (code == INSN
	  && (set = single_set (p))
	  && REG_P (SET_DEST (set))
	  && REGNO (SET_DEST (set)) == regno)
	{
	  this = loop_invariant_p (loop, SET_SRC (set));
	  if (this != 0)
	    value |= this;
	  else if ((temp = find_reg_note (p, REG_EQUAL, NULL_RTX)))
	    {
	      /* If this is a libcall, then any invariant REG_EQUAL note is OK.
		 If this is an ordinary insn, then only CONSTANT_P REG_EQUAL
		 notes are OK.  */
	      this = (CONSTANT_P (XEXP (temp, 0))
		      || (find_reg_note (p, REG_RETVAL, NULL_RTX)
			  && loop_invariant_p (loop, XEXP (temp, 0))));
	      if (this != 0)
		value |= this;
	    }
	}
      if (this != 0)
	count--;
      else if (code != NOTE)
	{
	  regs->array[regno].set_in_loop = old;
	  return 0;
	}
    }

  regs->array[regno].set_in_loop = old;
  /* If loop_invariant_p ever returned 2, we return 2.  */
  return 1 + (value & 2);
}

/* Look at all uses (not sets) of registers in X.  For each, if it is
   the single use, set USAGE[REGNO] to INSN; if there was a previous use in
   a different insn, set USAGE[REGNO] to const0_rtx.  */

static void
find_single_use_in_loop (struct loop_regs *regs, rtx insn, rtx x)
{
  enum rtx_code code = GET_CODE (x);
  const char *fmt = GET_RTX_FORMAT (code);
  int i, j;

  if (code == REG)
    regs->array[REGNO (x)].single_usage
      = (regs->array[REGNO (x)].single_usage != 0
	 && regs->array[REGNO (x)].single_usage != insn)
	? const0_rtx : insn;

  else if (code == SET)
    {
      /* Don't count SET_DEST if it is a REG; otherwise count things
	 in SET_DEST because if a register is partially modified, it won't
	 show up as a potential movable so we don't care how USAGE is set
	 for it.  */
      if (!REG_P (SET_DEST (x)))
	find_single_use_in_loop (regs, insn, SET_DEST (x));
      find_single_use_in_loop (regs, insn, SET_SRC (x));
    }
  else
    for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
      {
	if (fmt[i] == 'e' && XEXP (x, i) != 0)
	  find_single_use_in_loop (regs, insn, XEXP (x, i));
	else if (fmt[i] == 'E')
	  for (j = XVECLEN (x, i) - 1; j >= 0; j--)
	    find_single_use_in_loop (regs, insn, XVECEXP (x, i, j));
      }
}

/* Count and record any set in X which is contained in INSN.  Update
   REGS->array[I].MAY_NOT_OPTIMIZE and LAST_SET for any register I set
   in X.  */

static void
count_one_set (struct loop_regs *regs, rtx insn, rtx x, rtx *last_set)
{
  if (GET_CODE (x) == CLOBBER && REG_P (XEXP (x, 0)))
    /* Don't move a reg that has an explicit clobber.
       It's not worth the pain to try to do it correctly.  */
    regs->array[REGNO (XEXP (x, 0))].may_not_optimize = 1;

  if (GET_CODE (x) == SET || GET_CODE (x) == CLOBBER)
    {
      rtx dest = SET_DEST (x);
      while (GET_CODE (dest) == SUBREG
	     || GET_CODE (dest) == ZERO_EXTRACT
	     || GET_CODE (dest) == STRICT_LOW_PART)
	dest = XEXP (dest, 0);
      if (REG_P (dest))
	{
	  int i;
	  int regno = REGNO (dest);
	  for (i = 0; i < LOOP_REGNO_NREGS (regno, dest); i++)
	    {
	      /* If this is the first setting of this reg
		 in current basic block, and it was set before,
		 it must be set in two basic blocks, so it cannot
		 be moved out of the loop.  */
	      if (regs->array[regno].set_in_loop > 0
		  && last_set[regno] == 0)
		regs->array[regno+i].may_not_optimize = 1;
	      /* If this is not first setting in current basic block,
		 see if reg was used in between previous one and this.
		 If so, neither one can be moved.  */
	      if (last_set[regno] != 0
		  && reg_used_between_p (dest, last_set[regno], insn))
		regs->array[regno+i].may_not_optimize = 1;
	      if (regs->array[regno+i].set_in_loop < 127)
		++regs->array[regno+i].set_in_loop;
	      last_set[regno+i] = insn;
	    }
	}
    }
}

/* Given a loop that is bounded by LOOP->START and LOOP->END and that
   is entered at LOOP->SCAN_START, return 1 if the register set in SET
   contained in insn INSN is used by any insn that precedes INSN in
   cyclic order starting from the loop entry point.

   We don't want to use INSN_LUID here because if we restrict INSN to those
   that have a valid INSN_LUID, it means we cannot move an invariant out
   from an inner loop past two loops.  */

static int
loop_reg_used_before_p (const struct loop *loop, rtx set, rtx insn)
{
  rtx reg = SET_DEST (set);
  rtx p;

  /* Scan forward checking for register usage.  If we hit INSN, we
     are done.  Otherwise, if we hit LOOP->END, wrap around to LOOP->START.  */
  for (p = loop->scan_start; p != insn; p = NEXT_INSN (p))
    {
      if (INSN_P (p) && reg_overlap_mentioned_p (reg, PATTERN (p)))
	return 1;

      if (p == loop->end)
	p = loop->start;
    }

  return 0;
}


/* Information we collect about arrays that we might want to prefetch.  */
struct prefetch_info
{
  struct iv_class *class;	/* Class this prefetch is based on.  */
  struct induction *giv;	/* GIV this prefetch is based on.  */
  rtx base_address;		/* Start prefetching from this address plus
				   index.  */
  HOST_WIDE_INT index;
  HOST_WIDE_INT stride;		/* Prefetch stride in bytes in each
				   iteration.  */
  unsigned int bytes_accessed;	/* Sum of sizes of all accesses to this
				   prefetch area in one iteration.  */
  unsigned int total_bytes;	/* Total bytes loop will access in this block.
				   This is set only for loops with known
				   iteration counts and is 0xffffffff
				   otherwise.  */
  int prefetch_in_loop;		/* Number of prefetch insns in loop.  */
  int prefetch_before_loop;	/* Number of prefetch insns before loop.  */
  unsigned int write : 1;	/* 1 for read/write prefetches.  */
};

/* Data used by check_store function.  */
struct check_store_data
{
  rtx mem_address;
  int mem_write;
};

static void check_store (rtx, rtx, void *);
static void emit_prefetch_instructions (struct loop *);
static int rtx_equal_for_prefetch_p (rtx, rtx);

/* Set mem_write when mem_address is found.  Used as callback to
   note_stores.  */
static void
check_store (rtx x, rtx pat ATTRIBUTE_UNUSED, void *data)
{
  struct check_store_data *d = (struct check_store_data *) data;

  if ((MEM_P (x)) && rtx_equal_p (d->mem_address, XEXP (x, 0)))
    d->mem_write = 1;
}

/* Like rtx_equal_p, but attempts to swap commutative operands.  This is
   important to get some addresses combined.  Later more sophisticated
   transformations can be added when necessary.

   ??? Same trick with swapping operand is done at several other places.
   It can be nice to develop some common way to handle this.  */

static int
rtx_equal_for_prefetch_p (rtx x, rtx y)
{
  int i;
  int j;
  enum rtx_code code = GET_CODE (x);
  const char *fmt;

  if (x == y)
    return 1;
  if (code != GET_CODE (y))
    return 0;

  if (COMMUTATIVE_ARITH_P (x))
    {
      return ((rtx_equal_for_prefetch_p (XEXP (x, 0), XEXP (y, 0))
	       && rtx_equal_for_prefetch_p (XEXP (x, 1), XEXP (y, 1)))
	      || (rtx_equal_for_prefetch_p (XEXP (x, 0), XEXP (y, 1))
	          && rtx_equal_for_prefetch_p (XEXP (x, 1), XEXP (y, 0))));
    }

  /* Compare the elements.  If any pair of corresponding elements fails to
     match, return 0 for the whole thing.  */

  fmt = GET_RTX_FORMAT (code);
  for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
    {
      switch (fmt[i])
	{
	case 'w':
	  if (XWINT (x, i) != XWINT (y, i))
	    return 0;
	  break;

	case 'i':
	  if (XINT (x, i) != XINT (y, i))
	    return 0;
	  break;

	case 'E':
	  /* Two vectors must have the same length.  */
	  if (XVECLEN (x, i) != XVECLEN (y, i))
	    return 0;

	  /* And the corresponding elements must match.  */
	  for (j = 0; j < XVECLEN (x, i); j++)
	    if (rtx_equal_for_prefetch_p (XVECEXP (x, i, j),
					  XVECEXP (y, i, j)) == 0)
	      return 0;
	  break;

	case 'e':
	  if (rtx_equal_for_prefetch_p (XEXP (x, i), XEXP (y, i)) == 0)
	    return 0;
	  break;

	case 's':
	  if (strcmp (XSTR (x, i), XSTR (y, i)))
	    return 0;
	  break;

	case 'u':
	  /* These are just backpointers, so they don't matter.  */
	  break;

	case '0':
	  break;

	  /* It is believed that rtx's at this level will never
	     contain anything but integers and other rtx's,
	     except for within LABEL_REFs and SYMBOL_REFs.  */
	default:
	  abort ();
	}
    }
  return 1;
}

/* Remove constant addition value from the expression X (when present)
   and return it.  */

static HOST_WIDE_INT
remove_constant_addition (rtx *x)
{
  HOST_WIDE_INT addval = 0;
  rtx exp = *x;

  /* Avoid clobbering a shared CONST expression.  */
  if (GET_CODE (exp) == CONST)
    {
      if (GET_CODE (XEXP (exp, 0)) == PLUS
	  && GET_CODE (XEXP (XEXP (exp, 0), 0)) == SYMBOL_REF
	  && GET_CODE (XEXP (XEXP (exp, 0), 1)) == CONST_INT)
	{
	  *x = XEXP (XEXP (exp, 0), 0);
	  return INTVAL (XEXP (XEXP (exp, 0), 1));
	}
      return 0;
    }

  if (GET_CODE (exp) == CONST_INT)
    {
      addval = INTVAL (exp);
      *x = const0_rtx;
    }

  /* For plus expression recurse on ourself.  */
  else if (GET_CODE (exp) == PLUS)
    {
      addval += remove_constant_addition (&XEXP (exp, 0));
      addval += remove_constant_addition (&XEXP (exp, 1));

      /* In case our parameter was constant, remove extra zero from the
	 expression.  */
      if (XEXP (exp, 0) == const0_rtx)
	*x = XEXP (exp, 1);
      else if (XEXP (exp, 1) == const0_rtx)
	*x = XEXP (exp, 0);
    }

  return addval;
}

/* Attempt to identify accesses to arrays that are most likely to cause cache
   misses, and emit prefetch instructions a few prefetch blocks forward.

   To detect the arrays we use the GIV information that was collected by the
   strength reduction pass.

   The prefetch instructions are generated after the GIV information is done
   and before the strength reduction process. The new GIVs are injected into
   the strength reduction tables, so the prefetch addresses are optimized as
   well.

   GIVs are split into base address, stride, and constant addition values.
   GIVs with the same address, stride and close addition values are combined
   into a single prefetch.  Also writes to GIVs are detected, so that prefetch
   for write instructions can be used for the block we write to, on machines
   that support write prefetches.

   Several heuristics are used to determine when to prefetch.  They are
   controlled by defined symbols that can be overridden for each target.  */

static void
emit_prefetch_instructions (struct loop *loop)
{
  int num_prefetches = 0;
  int num_real_prefetches = 0;
  int num_real_write_prefetches = 0;
  int num_prefetches_before = 0;
  int num_write_prefetches_before = 0;
  int ahead = 0;
  int i;
  struct iv_class *bl;
  struct induction *iv;
  struct prefetch_info info[MAX_PREFETCHES];
  struct loop_ivs *ivs = LOOP_IVS (loop);

  if (!HAVE_prefetch || PREFETCH_BLOCK == 0)
    return;

  /* Consider only loops w/o calls.  When a call is done, the loop is probably
     slow enough to read the memory.  */
  if (PREFETCH_NO_CALL && LOOP_INFO (loop)->has_call)
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream, "Prefetch: ignoring loop: has call.\n");

      return;
    }

  /* Don't prefetch in loops known to have few iterations.  */
  if (PREFETCH_NO_LOW_LOOPCNT
      && LOOP_INFO (loop)->n_iterations
      && LOOP_INFO (loop)->n_iterations <= PREFETCH_LOW_LOOPCNT)
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Prefetch: ignoring loop: not enough iterations.\n");
      return;
    }

  /* Search all induction variables and pick those interesting for the prefetch
     machinery.  */
  for (bl = ivs->list; bl; bl = bl->next)
    {
      struct induction *biv = bl->biv, *biv1;
      int basestride = 0;

      biv1 = biv;

      /* Expect all BIVs to be executed in each iteration.  This makes our
	 analysis more conservative.  */
      while (biv1)
	{
	  /* Discard non-constant additions that we can't handle well yet, and
	     BIVs that are executed multiple times; such BIVs ought to be
	     handled in the nested loop.  We accept not_every_iteration BIVs,
	     since these only result in larger strides and make our
	     heuristics more conservative.  */
	  if (GET_CODE (biv->add_val) != CONST_INT)
	    {
	      if (loop_dump_stream)
		{
		  fprintf (loop_dump_stream,
		    "Prefetch: ignoring biv %d: non-constant addition at insn %d:",
			   REGNO (biv->src_reg), INSN_UID (biv->insn));
		  print_rtl (loop_dump_stream, biv->add_val);
		  fprintf (loop_dump_stream, "\n");
		}
	      break;
	    }

	  if (biv->maybe_multiple)
	    {
	      if (loop_dump_stream)
		{
		  fprintf (loop_dump_stream,
			   "Prefetch: ignoring biv %d: maybe_multiple at insn %i:",
			   REGNO (biv->src_reg), INSN_UID (biv->insn));
		  print_rtl (loop_dump_stream, biv->add_val);
		  fprintf (loop_dump_stream, "\n");
		}
	      break;
	    }

	  basestride += INTVAL (biv1->add_val);
	  biv1 = biv1->next_iv;
	}

      if (biv1 || !basestride)
	continue;

      for (iv = bl->giv; iv; iv = iv->next_iv)
	{
	  rtx address;
	  rtx temp;
	  HOST_WIDE_INT index = 0;
	  int add = 1;
	  HOST_WIDE_INT stride = 0;
	  int stride_sign = 1;
	  struct check_store_data d;
	  const char *ignore_reason = NULL;
	  int size = GET_MODE_SIZE (GET_MODE (iv));

	  /* See whether an induction variable is interesting to us and if
	     not, report the reason.  */
	  if (iv->giv_type != DEST_ADDR)
	    ignore_reason = "giv is not a destination address";

	  /* We are interested only in constant stride memory references
	     in order to be able to compute density easily.  */
	  else if (GET_CODE (iv->mult_val) != CONST_INT)
	    ignore_reason = "stride is not constant";

	  else
	    {
	      stride = INTVAL (iv->mult_val) * basestride;
	      if (stride < 0)
		{
		  stride = -stride;
		  stride_sign = -1;
		}

	      /* On some targets, reversed order prefetches are not
		 worthwhile.  */
	      if (PREFETCH_NO_REVERSE_ORDER && stride_sign < 0)
		ignore_reason = "reversed order stride";

	      /* Prefetch of accesses with an extreme stride might not be
		 worthwhile, either.  */
	      else if (PREFETCH_NO_EXTREME_STRIDE
		       && stride > PREFETCH_EXTREME_STRIDE)
		ignore_reason = "extreme stride";

	      /* Ignore GIVs with varying add values; we can't predict the
		 value for the next iteration.  */
	      else if (!loop_invariant_p (loop, iv->add_val))
		ignore_reason = "giv has varying add value";

	      /* Ignore GIVs in the nested loops; they ought to have been
		 handled already.  */
	      else if (iv->maybe_multiple)
		ignore_reason = "giv is in nested loop";
	    }

	  if (ignore_reason != NULL)
	    {
	      if (loop_dump_stream)
		fprintf (loop_dump_stream,
			 "Prefetch: ignoring giv at %d: %s.\n",
			 INSN_UID (iv->insn), ignore_reason);
	      continue;
	    }

	  /* Determine the pointer to the basic array we are examining.  It is
	     the sum of the BIV's initial value and the GIV's add_val.  */
	  address = copy_rtx (iv->add_val);
	  temp = copy_rtx (bl->initial_value);

	  address = simplify_gen_binary (PLUS, Pmode, temp, address);
	  index = remove_constant_addition (&address);

	  d.mem_write = 0;
	  d.mem_address = *iv->location;

	  /* When the GIV is not always executed, we might be better off by
	     not dirtying the cache pages.  */
	  if (PREFETCH_CONDITIONAL || iv->always_executed)
	    note_stores (PATTERN (iv->insn), check_store, &d);
	  else
	    {
	      if (loop_dump_stream)
		fprintf (loop_dump_stream, "Prefetch: Ignoring giv at %d: %s\n",
			 INSN_UID (iv->insn), "in conditional code.");
	      continue;
	    }

	  /* Attempt to find another prefetch to the same array and see if we
	     can merge this one.  */
	  for (i = 0; i < num_prefetches; i++)
	    if (rtx_equal_for_prefetch_p (address, info[i].base_address)
		&& stride == info[i].stride)
	      {
		/* In case both access same array (same location
		   just with small difference in constant indexes), merge
		   the prefetches.  Just do the later and the earlier will
		   get prefetched from previous iteration.
		   The artificial threshold should not be too small,
		   but also not bigger than small portion of memory usually
		   traversed by single loop.  */
		if (index >= info[i].index
		    && index - info[i].index < PREFETCH_EXTREME_DIFFERENCE)
		  {
		    info[i].write |= d.mem_write;
		    info[i].bytes_accessed += size;
		    info[i].index = index;
		    info[i].giv = iv;
		    info[i].class = bl;
		    info[num_prefetches].base_address = address;
		    add = 0;
		    break;
		  }

		if (index < info[i].index
		    && info[i].index - index < PREFETCH_EXTREME_DIFFERENCE)
		  {
		    info[i].write |= d.mem_write;
		    info[i].bytes_accessed += size;
		    add = 0;
		    break;
		  }
	      }

	  /* Merging failed.  */
	  if (add)
	    {
	      info[num_prefetches].giv = iv;
	      info[num_prefetches].class = bl;
	      info[num_prefetches].index = index;
	      info[num_prefetches].stride = stride;
	      info[num_prefetches].base_address = address;
	      info[num_prefetches].write = d.mem_write;
	      info[num_prefetches].bytes_accessed = size;
	      num_prefetches++;
	      if (num_prefetches >= MAX_PREFETCHES)
		{
		  if (loop_dump_stream)
		    fprintf (loop_dump_stream,
			     "Maximal number of prefetches exceeded.\n");
		  return;
		}
	    }
	}
    }

  for (i = 0; i < num_prefetches; i++)
    {
      int density;

      /* Attempt to calculate the total number of bytes fetched by all
	 iterations of the loop.  Avoid overflow.  */
      if (LOOP_INFO (loop)->n_iterations
	  && ((unsigned HOST_WIDE_INT) (0xffffffff / info[i].stride)
	      >= LOOP_INFO (loop)->n_iterations))
	info[i].total_bytes = info[i].stride * LOOP_INFO (loop)->n_iterations;
      else
	info[i].total_bytes = 0xffffffff;

      density = info[i].bytes_accessed * 100 / info[i].stride;

      /* Prefetch might be worthwhile only when the loads/stores are dense.  */
      if (PREFETCH_ONLY_DENSE_MEM)
	if (density * 256 > PREFETCH_DENSE_MEM * 100
	    && (info[i].total_bytes / PREFETCH_BLOCK
		>= PREFETCH_BLOCKS_BEFORE_LOOP_MIN))
	  {
	    info[i].prefetch_before_loop = 1;
	    info[i].prefetch_in_loop
	      = (info[i].total_bytes / PREFETCH_BLOCK
		 > PREFETCH_BLOCKS_BEFORE_LOOP_MAX);
	  }
	else
	  {
	    info[i].prefetch_in_loop = 0, info[i].prefetch_before_loop = 0;
	    if (loop_dump_stream)
	      fprintf (loop_dump_stream,
		  "Prefetch: ignoring giv at %d: %d%% density is too low.\n",
		       INSN_UID (info[i].giv->insn), density);
	  }
      else
	info[i].prefetch_in_loop = 1, info[i].prefetch_before_loop = 1;

      /* Find how many prefetch instructions we'll use within the loop.  */
      if (info[i].prefetch_in_loop != 0)
	{
	  info[i].prefetch_in_loop = ((info[i].stride + PREFETCH_BLOCK - 1)
				  / PREFETCH_BLOCK);
	  num_real_prefetches += info[i].prefetch_in_loop;
	  if (info[i].write)
	    num_real_write_prefetches += info[i].prefetch_in_loop;
	}
    }

  /* Determine how many iterations ahead to prefetch within the loop, based
     on how many prefetches we currently expect to do within the loop.  */
  if (num_real_prefetches != 0)
    {
      if ((ahead = SIMULTANEOUS_PREFETCHES / num_real_prefetches) == 0)
	{
	  if (loop_dump_stream)
	    fprintf (loop_dump_stream,
		     "Prefetch: ignoring prefetches within loop: ahead is zero; %d < %d\n",
		     SIMULTANEOUS_PREFETCHES, num_real_prefetches);
	  num_real_prefetches = 0, num_real_write_prefetches = 0;
	}
    }
  /* We'll also use AHEAD to determine how many prefetch instructions to
     emit before a loop, so don't leave it zero.  */
  if (ahead == 0)
    ahead = PREFETCH_BLOCKS_BEFORE_LOOP_MAX;

  for (i = 0; i < num_prefetches; i++)
    {
      /* Update if we've decided not to prefetch anything within the loop.  */
      if (num_real_prefetches == 0)
	info[i].prefetch_in_loop = 0;

      /* Find how many prefetch instructions we'll use before the loop.  */
      if (info[i].prefetch_before_loop != 0)
	{
	  int n = info[i].total_bytes / PREFETCH_BLOCK;
	  if (n > ahead)
	    n = ahead;
	  info[i].prefetch_before_loop = n;
	  num_prefetches_before += n;
	  if (info[i].write)
	    num_write_prefetches_before += n;
	}

      if (loop_dump_stream)
	{
	  if (info[i].prefetch_in_loop == 0
	      && info[i].prefetch_before_loop == 0)
	    continue;
	  fprintf (loop_dump_stream, "Prefetch insn: %d",
		   INSN_UID (info[i].giv->insn));
	  fprintf (loop_dump_stream,
		   "; in loop: %d; before: %d; %s\n",
		   info[i].prefetch_in_loop,
		   info[i].prefetch_before_loop,
		   info[i].write ? "read/write" : "read only");
	  fprintf (loop_dump_stream,
		   " density: %d%%; bytes_accessed: %u; total_bytes: %u\n",
		   (int) (info[i].bytes_accessed * 100 / info[i].stride),
		   info[i].bytes_accessed, info[i].total_bytes);
	  fprintf (loop_dump_stream, " index: " HOST_WIDE_INT_PRINT_DEC
		   "; stride: " HOST_WIDE_INT_PRINT_DEC "; address: ",
		   info[i].index, info[i].stride);
	  print_rtl (loop_dump_stream, info[i].base_address);
	  fprintf (loop_dump_stream, "\n");
	}
    }

  if (num_real_prefetches + num_prefetches_before > 0)
    {
      /* Record that this loop uses prefetch instructions.  */
      LOOP_INFO (loop)->has_prefetch = 1;

      if (loop_dump_stream)
	{
	  fprintf (loop_dump_stream, "Real prefetches needed within loop: %d (write: %d)\n",
		   num_real_prefetches, num_real_write_prefetches);
	  fprintf (loop_dump_stream, "Real prefetches needed before loop: %d (write: %d)\n",
		   num_prefetches_before, num_write_prefetches_before);
	}
    }

  for (i = 0; i < num_prefetches; i++)
    {
      int y;

      for (y = 0; y < info[i].prefetch_in_loop; y++)
	{
	  rtx loc = copy_rtx (*info[i].giv->location);
	  rtx insn;
	  int bytes_ahead = PREFETCH_BLOCK * (ahead + y);
	  rtx before_insn = info[i].giv->insn;
	  rtx prev_insn = PREV_INSN (info[i].giv->insn);
	  rtx seq;

	  /* We can save some effort by offsetting the address on
	     architectures with offsettable memory references.  */
	  if (offsettable_address_p (0, VOIDmode, loc))
	    loc = plus_constant (loc, bytes_ahead);
	  else
	    {
	      rtx reg = gen_reg_rtx (Pmode);
	      loop_iv_add_mult_emit_before (loop, loc, const1_rtx,
					    GEN_INT (bytes_ahead), reg,
					    0, before_insn);
	      loc = reg;
	    }

	  start_sequence ();
	  /* Make sure the address operand is valid for prefetch.  */
	  if (! (*insn_data[(int)CODE_FOR_prefetch].operand[0].predicate)
		  (loc, insn_data[(int)CODE_FOR_prefetch].operand[0].mode))
	    loc = force_reg (Pmode, loc);
	  emit_insn (gen_prefetch (loc, GEN_INT (info[i].write),
				   GEN_INT (3)));
	  seq = get_insns ();
	  end_sequence ();
	  emit_insn_before (seq, before_insn);

	  /* Check all insns emitted and record the new GIV
	     information.  */
	  insn = NEXT_INSN (prev_insn);
	  while (insn != before_insn)
	    {
	      insn = check_insn_for_givs (loop, insn,
					  info[i].giv->always_executed,
					  info[i].giv->maybe_multiple);
	      insn = NEXT_INSN (insn);
	    }
	}

      if (PREFETCH_BEFORE_LOOP)
	{
	  /* Emit insns before the loop to fetch the first cache lines or,
	     if we're not prefetching within the loop, everything we expect
	     to need.  */
	  for (y = 0; y < info[i].prefetch_before_loop; y++)
	    {
	      rtx reg = gen_reg_rtx (Pmode);
	      rtx loop_start = loop->start;
	      rtx init_val = info[i].class->initial_value;
	      rtx add_val = simplify_gen_binary (PLUS, Pmode,
						 info[i].giv->add_val,
						 GEN_INT (y * PREFETCH_BLOCK));

	      /* Functions called by LOOP_IV_ADD_EMIT_BEFORE expect a
		 non-constant INIT_VAL to have the same mode as REG, which
		 in this case we know to be Pmode.  */
	      if (GET_MODE (init_val) != Pmode && !CONSTANT_P (init_val))
		{
		  rtx seq;

		  start_sequence ();
		  init_val = convert_to_mode (Pmode, init_val, 0);
		  seq = get_insns ();
		  end_sequence ();
		  loop_insn_emit_before (loop, 0, loop_start, seq);
		}
	      loop_iv_add_mult_emit_before (loop, init_val,
					    info[i].giv->mult_val,
					    add_val, reg, 0, loop_start);
	      emit_insn_before (gen_prefetch (reg, GEN_INT (info[i].write),
					      GEN_INT (3)),
				loop_start);
	    }
	}
    }

  return;
}

/* Communication with routines called via `note_stores'.  */

static rtx note_insn;

/* Dummy register to have nonzero DEST_REG for DEST_ADDR type givs.  */

static rtx addr_placeholder;

/* ??? Unfinished optimizations, and possible future optimizations,
   for the strength reduction code.  */

/* ??? The interaction of biv elimination, and recognition of 'constant'
   bivs, may cause problems.  */

/* ??? Add heuristics so that DEST_ADDR strength reduction does not cause
   performance problems.

   Perhaps don't eliminate things that can be combined with an addressing
   mode.  Find all givs that have the same biv, mult_val, and add_val;
   then for each giv, check to see if its only use dies in a following
   memory address.  If so, generate a new memory address and check to see
   if it is valid.   If it is valid, then store the modified memory address,
   otherwise, mark the giv as not done so that it will get its own iv.  */

/* ??? Could try to optimize branches when it is known that a biv is always
   positive.  */

/* ??? When replace a biv in a compare insn, we should replace with closest
   giv so that an optimized branch can still be recognized by the combiner,
   e.g. the VAX acb insn.  */

/* ??? Many of the checks involving uid_luid could be simplified if regscan
   was rerun in loop_optimize whenever a register was added or moved.
   Also, some of the optimizations could be a little less conservative.  */

/* Searches the insns between INSN and LOOP->END.  Returns 1 if there
   is a backward branch in that range that branches to somewhere between
   LOOP->START and INSN.  Returns 0 otherwise.  */

/* ??? This is quadratic algorithm.  Could be rewritten to be linear.
   In practice, this is not a problem, because this function is seldom called,
   and uses a negligible amount of CPU time on average.  */

static int
back_branch_in_range_p (const struct loop *loop, rtx insn)
{
  rtx p, q, target_insn;
  rtx loop_start = loop->start;
  rtx loop_end = loop->end;
  rtx orig_loop_end = loop->end;

  /* Stop before we get to the backward branch at the end of the loop.  */
  loop_end = prev_nonnote_insn (loop_end);
  if (BARRIER_P (loop_end))
    loop_end = PREV_INSN (loop_end);

  /* Check in case insn has been deleted, search forward for first non
     deleted insn following it.  */
  while (INSN_DELETED_P (insn))
    insn = NEXT_INSN (insn);

  /* Check for the case where insn is the last insn in the loop.  Deal
     with the case where INSN was a deleted loop test insn, in which case
     it will now be the NOTE_LOOP_END.  */
  if (insn == loop_end || insn == orig_loop_end)
    return 0;

  for (p = NEXT_INSN (insn); p != loop_end; p = NEXT_INSN (p))
    {
      if (JUMP_P (p))
	{
	  target_insn = JUMP_LABEL (p);

	  /* Search from loop_start to insn, to see if one of them is
	     the target_insn.  We can't use INSN_LUID comparisons here,
	     since insn may not have an LUID entry.  */
	  for (q = loop_start; q != insn; q = NEXT_INSN (q))
	    if (q == target_insn)
	      return 1;
	}
    }

  return 0;
}

/* Scan the loop body and call FNCALL for each insn.  In the addition to the
   LOOP and INSN parameters pass MAYBE_MULTIPLE and NOT_EVERY_ITERATION to the
   callback.

   NOT_EVERY_ITERATION is 1 if current insn is not known to be executed at
   least once for every loop iteration except for the last one.

   MAYBE_MULTIPLE is 1 if current insn may be executed more than once for every
   loop iteration.
 */
typedef rtx (*loop_insn_callback) (struct loop *, rtx, int, int);
static void
for_each_insn_in_loop (struct loop *loop, loop_insn_callback fncall)
{
  int not_every_iteration = 0;
  int maybe_multiple = 0;
  int past_loop_latch = 0;
  bool exit_test_is_entry = false;
  rtx p;

  /* If loop_scan_start points to the loop exit test, the loop body
     cannot be counted on running on every iteration, and we have to
     be wary of subversive use of gotos inside expression
     statements.  */
  if (prev_nonnote_insn (loop->scan_start) != prev_nonnote_insn (loop->start))
    {
      exit_test_is_entry = true;
      maybe_multiple = back_branch_in_range_p (loop, loop->scan_start);
    }

  /* Scan through loop and update NOT_EVERY_ITERATION and MAYBE_MULTIPLE.  */
  for (p = next_insn_in_loop (loop, loop->scan_start);
       p != NULL_RTX;
       p = next_insn_in_loop (loop, p))
    {
      p = fncall (loop, p, not_every_iteration, maybe_multiple);

      /* Past CODE_LABEL, we get to insns that may be executed multiple
         times.  The only way we can be sure that they can't is if every
         jump insn between here and the end of the loop either
         returns, exits the loop, is a jump to a location that is still
         behind the label, or is a jump to the loop start.  */

      if (LABEL_P (p))
	{
	  rtx insn = p;

	  maybe_multiple = 0;

	  while (1)
	    {
	      insn = NEXT_INSN (insn);
	      if (insn == loop->scan_start)
		break;
	      if (insn == loop->end)
		{
		  if (loop->top != 0)
		    insn = loop->top;
		  else
		    break;
		  if (insn == loop->scan_start)
		    break;
		}

	      if (JUMP_P (insn)
		  && GET_CODE (PATTERN (insn)) != RETURN
		  && (!any_condjump_p (insn)
		      || (JUMP_LABEL (insn) != 0
			  && JUMP_LABEL (insn) != loop->scan_start
			  && !loop_insn_first_p (p, JUMP_LABEL (insn)))))
		{
		  maybe_multiple = 1;
		  break;
		}
	    }
	}

      /* Past a jump, we get to insns for which we can't count
         on whether they will be executed during each iteration.  */
      /* This code appears twice in strength_reduce.  There is also similar
         code in scan_loop.  */
      if (JUMP_P (p)
      /* If we enter the loop in the middle, and scan around to the
         beginning, don't set not_every_iteration for that.
         This can be any kind of jump, since we want to know if insns
         will be executed if the loop is executed.  */
	  && (exit_test_is_entry
	      || !(JUMP_LABEL (p) == loop->top
		   && ((NEXT_INSN (NEXT_INSN (p)) == loop->end
			&& any_uncondjump_p (p))
		       || (NEXT_INSN (p) == loop->end
			   && any_condjump_p (p))))))
	{
	  rtx label = 0;

	  /* If this is a jump outside the loop, then it also doesn't
	     matter.  Check to see if the target of this branch is on the
	     loop->exits_labels list.  */

	  for (label = loop->exit_labels; label; label = LABEL_NEXTREF (label))
	    if (XEXP (label, 0) == JUMP_LABEL (p))
	      break;

	  if (!label)
	    not_every_iteration = 1;
	}

      /* Note if we pass a loop latch.  If we do, then we can not clear
         NOT_EVERY_ITERATION below when we pass the last CODE_LABEL in
         a loop since a jump before the last CODE_LABEL may have started
         a new loop iteration.

         Note that LOOP_TOP is only set for rotated loops and we need
         this check for all loops, so compare against the CODE_LABEL
         which immediately follows LOOP_START.  */
      if (JUMP_P (p)
	  && JUMP_LABEL (p) == NEXT_INSN (loop->start))
	past_loop_latch = 1;

      /* Unlike in the code motion pass where MAYBE_NEVER indicates that
         an insn may never be executed, NOT_EVERY_ITERATION indicates whether
         or not an insn is known to be executed each iteration of the
         loop, whether or not any iterations are known to occur.

         Therefore, if we have just passed a label and have no more labels
         between here and the test insn of the loop, and we have not passed
         a jump to the top of the loop, then we know these insns will be
         executed each iteration.  */

      if (not_every_iteration
	  && !past_loop_latch
	  && LABEL_P (p)
	  && no_labels_between_p (p, loop->end))
	not_every_iteration = 0;
    }
}

static void
loop_bivs_find (struct loop *loop)
{
  struct loop_regs *regs = LOOP_REGS (loop);
  struct loop_ivs *ivs = LOOP_IVS (loop);
  /* Temporary list pointers for traversing ivs->list.  */
  struct iv_class *bl, **backbl;

  ivs->list = 0;

  for_each_insn_in_loop (loop, check_insn_for_bivs);

  /* Scan ivs->list to remove all regs that proved not to be bivs.
     Make a sanity check against regs->n_times_set.  */
  for (backbl = &ivs->list, bl = *backbl; bl; bl = bl->next)
    {
      if (REG_IV_TYPE (ivs, bl->regno) != BASIC_INDUCT
	  /* Above happens if register modified by subreg, etc.  */
	  /* Make sure it is not recognized as a basic induction var: */
	  || regs->array[bl->regno].n_times_set != bl->biv_count
	  /* If never incremented, it is invariant that we decided not to
	     move.  So leave it alone.  */
	  || ! bl->incremented)
	{
	  if (loop_dump_stream)
	    fprintf (loop_dump_stream, "Biv %d: discarded, %s\n",
		     bl->regno,
		     (REG_IV_TYPE (ivs, bl->regno) != BASIC_INDUCT
		      ? "not induction variable"
		      : (! bl->incremented ? "never incremented"
			 : "count error")));

	  REG_IV_TYPE (ivs, bl->regno) = NOT_BASIC_INDUCT;
	  *backbl = bl->next;
	}
      else
	{
	  backbl = &bl->next;

	  if (loop_dump_stream)
	    fprintf (loop_dump_stream, "Biv %d: verified\n", bl->regno);
	}
    }
}


/* Determine how BIVS are initialized by looking through pre-header
   extended basic block.  */
static void
loop_bivs_init_find (struct loop *loop)
{
  struct loop_ivs *ivs = LOOP_IVS (loop);
  /* Temporary list pointers for traversing ivs->list.  */
  struct iv_class *bl;
  int call_seen;
  rtx p;

  /* Find initial value for each biv by searching backwards from loop_start,
     halting at first label.  Also record any test condition.  */

  call_seen = 0;
  for (p = loop->start; p && !LABEL_P (p); p = PREV_INSN (p))
    {
      rtx test;

      note_insn = p;

      if (CALL_P (p))
	call_seen = 1;

      if (INSN_P (p))
	note_stores (PATTERN (p), record_initial, ivs);

      /* Record any test of a biv that branches around the loop if no store
	 between it and the start of loop.  We only care about tests with
	 constants and registers and only certain of those.  */
      if (JUMP_P (p)
	  && JUMP_LABEL (p) != 0
	  && next_real_insn (JUMP_LABEL (p)) == next_real_insn (loop->end)
	  && (test = get_condition_for_loop (loop, p)) != 0
	  && REG_P (XEXP (test, 0))
	  && REGNO (XEXP (test, 0)) < max_reg_before_loop
	  && (bl = REG_IV_CLASS (ivs, REGNO (XEXP (test, 0)))) != 0
	  && valid_initial_value_p (XEXP (test, 1), p, call_seen, loop->start)
	  && bl->init_insn == 0)
	{
	  /* If an NE test, we have an initial value!  */
	  if (GET_CODE (test) == NE)
	    {
	      bl->init_insn = p;
	      bl->init_set = gen_rtx_SET (VOIDmode,
					  XEXP (test, 0), XEXP (test, 1));
	    }
	  else
	    bl->initial_test = test;
	}
    }
}


/* Look at the each biv and see if we can say anything better about its
   initial value from any initializing insns set up above.  (This is done
   in two passes to avoid missing SETs in a PARALLEL.)  */
static void
loop_bivs_check (struct loop *loop)
{
  struct loop_ivs *ivs = LOOP_IVS (loop);
  /* Temporary list pointers for traversing ivs->list.  */
  struct iv_class *bl;
  struct iv_class **backbl;

  for (backbl = &ivs->list; (bl = *backbl); backbl = &bl->next)
    {
      rtx src;
      rtx note;

      if (! bl->init_insn)
	continue;

      /* IF INIT_INSN has a REG_EQUAL or REG_EQUIV note and the value
	 is a constant, use the value of that.  */
      if (((note = find_reg_note (bl->init_insn, REG_EQUAL, 0)) != NULL
	   && CONSTANT_P (XEXP (note, 0)))
	  || ((note = find_reg_note (bl->init_insn, REG_EQUIV, 0)) != NULL
	      && CONSTANT_P (XEXP (note, 0))))
	src = XEXP (note, 0);
      else
	src = SET_SRC (bl->init_set);

      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Biv %d: initialized at insn %d: initial value ",
		 bl->regno, INSN_UID (bl->init_insn));

      if ((GET_MODE (src) == GET_MODE (regno_reg_rtx[bl->regno])
	   || GET_MODE (src) == VOIDmode)
	  && valid_initial_value_p (src, bl->init_insn,
				    LOOP_INFO (loop)->pre_header_has_call,
				    loop->start))
	{
	  bl->initial_value = src;

	  if (loop_dump_stream)
	    {
	      print_simple_rtl (loop_dump_stream, src);
	      fputc ('\n', loop_dump_stream);
	    }
	}
      /* If we can't make it a giv,
	 let biv keep initial value of "itself".  */
      else if (loop_dump_stream)
	fprintf (loop_dump_stream, "is complex\n");
    }
}


/* Search the loop for general induction variables.  */

static void
loop_givs_find (struct loop* loop)
{
  for_each_insn_in_loop (loop, check_insn_for_givs);
}


/* For each giv for which we still don't know whether or not it is
   replaceable, check to see if it is replaceable because its final value
   can be calculated.  */

static void
loop_givs_check (struct loop *loop)
{
  struct loop_ivs *ivs = LOOP_IVS (loop);
  struct iv_class *bl;

  for (bl = ivs->list; bl; bl = bl->next)
    {
      struct induction *v;

      for (v = bl->giv; v; v = v->next_iv)
	if (! v->replaceable && ! v->not_replaceable)
	  check_final_value (loop, v);
    }
}

/* Try to generate the simplest rtx for the expression
   (PLUS (MULT mult1 mult2) add1).  This is used to calculate the initial
   value of giv's.  */

static rtx
fold_rtx_mult_add (rtx mult1, rtx mult2, rtx add1, enum machine_mode mode)
{
  rtx temp, mult_res;
  rtx result;

  /* The modes must all be the same.  This should always be true.  For now,
     check to make sure.  */
  if ((GET_MODE (mult1) != mode && GET_MODE (mult1) != VOIDmode)
      || (GET_MODE (mult2) != mode && GET_MODE (mult2) != VOIDmode)
      || (GET_MODE (add1) != mode && GET_MODE (add1) != VOIDmode))
    abort ();

  /* Ensure that if at least one of mult1/mult2 are constant, then mult2
     will be a constant.  */
  if (GET_CODE (mult1) == CONST_INT)
    {
      temp = mult2;
      mult2 = mult1;
      mult1 = temp;
    }

  mult_res = simplify_binary_operation (MULT, mode, mult1, mult2);
  if (! mult_res)
    mult_res = gen_rtx_MULT (mode, mult1, mult2);

  /* Again, put the constant second.  */
  if (GET_CODE (add1) == CONST_INT)
    {
      temp = add1;
      add1 = mult_res;
      mult_res = temp;
    }

  result = simplify_binary_operation (PLUS, mode, add1, mult_res);
  if (! result)
    result = gen_rtx_PLUS (mode, add1, mult_res);

  return result;
}

/* Searches the list of induction struct's for the biv BL, to try to calculate
   the total increment value for one iteration of the loop as a constant.

   Returns the increment value as an rtx, simplified as much as possible,
   if it can be calculated.  Otherwise, returns 0.  */

static rtx
biv_total_increment (const struct iv_class *bl)
{
  struct induction *v;
  rtx result;

  /* For increment, must check every instruction that sets it.  Each
     instruction must be executed only once each time through the loop.
     To verify this, we check that the insn is always executed, and that
     there are no backward branches after the insn that branch to before it.
     Also, the insn must have a mult_val of one (to make sure it really is
     an increment).  */

  result = const0_rtx;
  for (v = bl->biv; v; v = v->next_iv)
    {
      if (v->always_computable && v->mult_val == const1_rtx
	  && ! v->maybe_multiple
	  && SCALAR_INT_MODE_P (v->mode))
	{
	  /* If we have already counted it, skip it.  */
	  if (v->same)
	    continue;

	  result = fold_rtx_mult_add (result, const1_rtx, v->add_val, v->mode);
	}
      else
	return 0;
    }

  return result;
}

/* Try to prove that the register is dead after the loop exits.  Trace every
   loop exit looking for an insn that will always be executed, which sets
   the register to some value, and appears before the first use of the register
   is found.  If successful, then return 1, otherwise return 0.  */

/* ?? Could be made more intelligent in the handling of jumps, so that
   it can search past if statements and other similar structures.  */

static int
reg_dead_after_loop (const struct loop *loop, rtx reg)
{
  rtx insn, label;
  int jump_count = 0;
  int label_count = 0;

  /* In addition to checking all exits of this loop, we must also check
     all exits of inner nested loops that would exit this loop.  We don't
     have any way to identify those, so we just give up if there are any
     such inner loop exits.  */

  for (label = loop->exit_labels; label; label = LABEL_NEXTREF (label))
    label_count++;

  if (label_count != loop->exit_count)
    return 0;

  /* HACK: Must also search the loop fall through exit, create a label_ref
     here which points to the loop->end, and append the loop_number_exit_labels
     list to it.  */
  label = gen_rtx_LABEL_REF (VOIDmode, loop->end);
  LABEL_NEXTREF (label) = loop->exit_labels;

  for (; label; label = LABEL_NEXTREF (label))
    {
      /* Succeed if find an insn which sets the biv or if reach end of
	 function.  Fail if find an insn that uses the biv, or if come to
	 a conditional jump.  */

      insn = NEXT_INSN (XEXP (label, 0));
      while (insn)
	{
	  if (INSN_P (insn))
	    {
	      rtx set, note;

	      if (reg_referenced_p (reg, PATTERN (insn)))
		return 0;

	      note = find_reg_equal_equiv_note (insn);
	      if (note && reg_overlap_mentioned_p (reg, XEXP (note, 0)))
		return 0;

	      set = single_set (insn);
	      if (set && rtx_equal_p (SET_DEST (set), reg))
		break;

	      if (JUMP_P (insn))
		{
		  if (GET_CODE (PATTERN (insn)) == RETURN)
		    break;
		  else if (!any_uncondjump_p (insn)
		           /* Prevent infinite loop following infinite loops.  */
		           || jump_count++ > 20)
		    return 0;
		  else
		    insn = JUMP_LABEL (insn);
		}
	    }

	  insn = NEXT_INSN (insn);
	}
    }

  /* Success, the register is dead on all loop exits.  */
  return 1;
}

/* Try to calculate the final value of the biv, the value it will have at
   the end of the loop.  If we can do it, return that value.  */

static rtx
final_biv_value (const struct loop *loop, struct iv_class *bl)
{
  unsigned HOST_WIDE_INT n_iterations = LOOP_INFO (loop)->n_iterations;
  rtx increment, tem;

  /* ??? This only works for MODE_INT biv's.  Reject all others for now.  */

  if (GET_MODE_CLASS (bl->biv->mode) != MODE_INT)
    return 0;

  /* The final value for reversed bivs must be calculated differently than
     for ordinary bivs.  In this case, there is already an insn after the
     loop which sets this biv's final value (if necessary), and there are
     no other loop exits, so we can return any value.  */
  if (bl->reversed)
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Final biv value for %d, reversed biv.\n", bl->regno);

      return const0_rtx;
    }

  /* Try to calculate the final value as initial value + (number of iterations
     * increment).  For this to work, increment must be invariant, the only
     exit from the loop must be the fall through at the bottom (otherwise
     it may not have its final value when the loop exits), and the initial
     value of the biv must be invariant.  */

  if (n_iterations != 0
      && ! loop->exit_count
      && loop_invariant_p (loop, bl->initial_value))
    {
      increment = biv_total_increment (bl);

      if (increment && loop_invariant_p (loop, increment))
	{
	  /* Can calculate the loop exit value, emit insns after loop
	     end to calculate this value into a temporary register in
	     case it is needed later.  */

	  tem = gen_reg_rtx (bl->biv->mode);
	  record_base_value (REGNO (tem), bl->biv->add_val, 0);
	  loop_iv_add_mult_sink (loop, increment, GEN_INT (n_iterations),
				 bl->initial_value, tem);

	  if (loop_dump_stream)
	    fprintf (loop_dump_stream,
		     "Final biv value for %d, calculated.\n", bl->regno);

	  return tem;
	}
    }

  /* Check to see if the biv is dead at all loop exits.  */
  if (reg_dead_after_loop (loop, bl->biv->src_reg))
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Final biv value for %d, biv dead after loop exit.\n",
		 bl->regno);

      return const0_rtx;
    }

  return 0;
}

/* Return nonzero if it is possible to eliminate the biv BL provided
   all givs are reduced.  This is possible if either the reg is not
   used outside the loop, or we can compute what its final value will
   be.  */

static int
loop_biv_eliminable_p (struct loop *loop, struct iv_class *bl,
		       int threshold, int insn_count)
{
  /* For architectures with a decrement_and_branch_until_zero insn,
     don't do this if we put a REG_NONNEG note on the endtest for this
     biv.  */

#ifdef HAVE_decrement_and_branch_until_zero
  if (bl->nonneg)
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Cannot eliminate nonneg biv %d.\n", bl->regno);
      return 0;
    }
#endif

  /* Check that biv is used outside loop or if it has a final value.
     Compare against bl->init_insn rather than loop->start.  We aren't
     concerned with any uses of the biv between init_insn and
     loop->start since these won't be affected by the value of the biv
     elsewhere in the function, so long as init_insn doesn't use the
     biv itself.  */

  if ((REGNO_LAST_LUID (bl->regno) < INSN_LUID (loop->end)
       && bl->init_insn
       && INSN_UID (bl->init_insn) < max_uid_for_loop
       && REGNO_FIRST_LUID (bl->regno) >= INSN_LUID (bl->init_insn)
       && ! reg_mentioned_p (bl->biv->dest_reg, SET_SRC (bl->init_set)))
      || (bl->final_value = final_biv_value (loop, bl)))
    return maybe_eliminate_biv (loop, bl, 0, threshold,	insn_count);

  if (loop_dump_stream)
    {
      fprintf (loop_dump_stream,
	       "Cannot eliminate biv %d.\n",
	       bl->regno);
      fprintf (loop_dump_stream,
	       "First use: insn %d, last use: insn %d.\n",
	       REGNO_FIRST_UID (bl->regno),
	       REGNO_LAST_UID (bl->regno));
    }
  return 0;
}


/* Reduce each giv of BL that we have decided to reduce.  */

static void
loop_givs_reduce (struct loop *loop, struct iv_class *bl)
{
  struct induction *v;

  for (v = bl->giv; v; v = v->next_iv)
    {
      struct induction *tv;
      if (! v->ignore && v->same == 0)
	{
	  int auto_inc_opt = 0;

	  /* If the code for derived givs immediately below has already
	     allocated a new_reg, we must keep it.  */
	  if (! v->new_reg)
	    v->new_reg = gen_reg_rtx (v->mode);

#ifdef AUTO_INC_DEC
	  /* If the target has auto-increment addressing modes, and
	     this is an address giv, then try to put the increment
	     immediately after its use, so that flow can create an
	     auto-increment addressing mode.  */
	  /* Don't do this for loops entered at the bottom, to avoid
	     this invalid transformation:
		jmp L;	        ->          jmp L;
	     TOP:			TOP:
		use giv			    use giv
	     L:				    inc giv
		inc biv			L:
		test biv		    test giv
		cbr TOP			    cbr TOP
	  */
	  if (v->giv_type == DEST_ADDR && bl->biv_count == 1
	      && bl->biv->always_executed && ! bl->biv->maybe_multiple
	      /* We don't handle reversed biv's because bl->biv->insn
		 does not have a valid INSN_LUID.  */
	      && ! bl->reversed
	      && v->always_executed && ! v->maybe_multiple
	      && INSN_UID (v->insn) < max_uid_for_loop
	      && !loop->top)	
	    {
	      /* If other giv's have been combined with this one, then
		 this will work only if all uses of the other giv's occur
		 before this giv's insn.  This is difficult to check.

		 We simplify this by looking for the common case where
		 there is one DEST_REG giv, and this giv's insn is the
		 last use of the dest_reg of that DEST_REG giv.  If the
		 increment occurs after the address giv, then we can
		 perform the optimization.  (Otherwise, the increment
		 would have to go before other_giv, and we would not be
		 able to combine it with the address giv to get an
		 auto-inc address.)  */
	      if (v->combined_with)
		{
		  struct induction *other_giv = 0;

		  for (tv = bl->giv; tv; tv = tv->next_iv)
		    if (tv->same == v)
		      {
			if (other_giv)
			  break;
			else
			  other_giv = tv;
		      }
		  if (! tv && other_giv
		      && REGNO (other_giv->dest_reg) < max_reg_before_loop
		      && (REGNO_LAST_UID (REGNO (other_giv->dest_reg))
			  == INSN_UID (v->insn))
		      && INSN_LUID (v->insn) < INSN_LUID (bl->biv->insn))
		    auto_inc_opt = 1;
		}
	      /* Check for case where increment is before the address
		 giv.  Do this test in "loop order".  */
	      else if ((INSN_LUID (v->insn) > INSN_LUID (bl->biv->insn)
			&& (INSN_LUID (v->insn) < INSN_LUID (loop->scan_start)
			    || (INSN_LUID (bl->biv->insn)
				> INSN_LUID (loop->scan_start))))
		       || (INSN_LUID (v->insn) < INSN_LUID (loop->scan_start)
			   && (INSN_LUID (loop->scan_start)
			       < INSN_LUID (bl->biv->insn))))
		auto_inc_opt = -1;
	      else
		auto_inc_opt = 1;

#ifdef HAVE_cc0
	      {
		rtx prev;

		/* We can't put an insn immediately after one setting
		   cc0, or immediately before one using cc0.  */
		if ((auto_inc_opt == 1 && sets_cc0_p (PATTERN (v->insn)))
		    || (auto_inc_opt == -1
			&& (prev = prev_nonnote_insn (v->insn)) != 0
			&& INSN_P (prev)
			&& sets_cc0_p (PATTERN (prev))))
		  auto_inc_opt = 0;
	      }
#endif

	      if (auto_inc_opt)
		v->auto_inc_opt = 1;
	    }
#endif

	  /* For each place where the biv is incremented, add an insn
	     to increment the new, reduced reg for the giv.  */
	  for (tv = bl->biv; tv; tv = tv->next_iv)
	    {
	      rtx insert_before;

	      /* Skip if location is the same as a previous one.  */
	      if (tv->same)
		continue;
	      if (! auto_inc_opt)
		insert_before = NEXT_INSN (tv->insn);
	      else if (auto_inc_opt == 1)
		insert_before = NEXT_INSN (v->insn);
	      else
		insert_before = v->insn;

	      if (tv->mult_val == const1_rtx)
		loop_iv_add_mult_emit_before (loop, tv->add_val, v->mult_val,
					      v->new_reg, v->new_reg,
					      0, insert_before);
	      else /* tv->mult_val == const0_rtx */
		/* A multiply is acceptable here
		   since this is presumed to be seldom executed.  */
		loop_iv_add_mult_emit_before (loop, tv->add_val, v->mult_val,
					      v->add_val, v->new_reg,
					      0, insert_before);
	    }

	  /* Add code at loop start to initialize giv's reduced reg.  */

	  loop_iv_add_mult_hoist (loop,
				  extend_value_for_giv (v, bl->initial_value),
				  v->mult_val, v->add_val, v->new_reg);
	}
    }
}


/* Check for givs whose first use is their definition and whose
   last use is the definition of another giv.  If so, it is likely
   dead and should not be used to derive another giv nor to
   eliminate a biv.  */

static void
loop_givs_dead_check (struct loop *loop ATTRIBUTE_UNUSED, struct iv_class *bl)
{
  struct induction *v;

  for (v = bl->giv; v; v = v->next_iv)
    {
      if (v->ignore
	  || (v->same && v->same->ignore))
	continue;

      if (v->giv_type == DEST_REG
	  && REGNO_FIRST_UID (REGNO (v->dest_reg)) == INSN_UID (v->insn))
	{
	  struct induction *v1;

	  for (v1 = bl->giv; v1; v1 = v1->next_iv)
	    if (REGNO_LAST_UID (REGNO (v->dest_reg)) == INSN_UID (v1->insn))
	      v->maybe_dead = 1;
	}
    }
}


static void
loop_givs_rescan (struct loop *loop, struct iv_class *bl, rtx *reg_map)
{
  struct induction *v;

  for (v = bl->giv; v; v = v->next_iv)
    {
      if (v->same && v->same->ignore)
	v->ignore = 1;

      if (v->ignore)
	continue;

      /* Update expression if this was combined, in case other giv was
	 replaced.  */
      if (v->same)
	v->new_reg = replace_rtx (v->new_reg,
				  v->same->dest_reg, v->same->new_reg);

      /* See if this register is known to be a pointer to something.  If
	 so, see if we can find the alignment.  First see if there is a
	 destination register that is a pointer.  If so, this shares the
	 alignment too.  Next see if we can deduce anything from the
	 computational information.  If not, and this is a DEST_ADDR
	 giv, at least we know that it's a pointer, though we don't know
	 the alignment.  */
      if (REG_P (v->new_reg)
	  && v->giv_type == DEST_REG
	  && REG_POINTER (v->dest_reg))
	mark_reg_pointer (v->new_reg,
			  REGNO_POINTER_ALIGN (REGNO (v->dest_reg)));
      else if (REG_P (v->new_reg)
	       && REG_POINTER (v->src_reg))
	{
	  unsigned int align = REGNO_POINTER_ALIGN (REGNO (v->src_reg));

	  if (align == 0
	      || GET_CODE (v->add_val) != CONST_INT
	      || INTVAL (v->add_val) % (align / BITS_PER_UNIT) != 0)
	    align = 0;

	  mark_reg_pointer (v->new_reg, align);
	}
      else if (REG_P (v->new_reg)
	       && REG_P (v->add_val)
	       && REG_POINTER (v->add_val))
	{
	  unsigned int align = REGNO_POINTER_ALIGN (REGNO (v->add_val));

	  if (align == 0 || GET_CODE (v->mult_val) != CONST_INT
	      || INTVAL (v->mult_val) % (align / BITS_PER_UNIT) != 0)
	    align = 0;

	  mark_reg_pointer (v->new_reg, align);
	}
      else if (REG_P (v->new_reg) && v->giv_type == DEST_ADDR)
	mark_reg_pointer (v->new_reg, 0);

      if (v->giv_type == DEST_ADDR)
	{
	  /* Store reduced reg as the address in the memref where we found
	     this giv.  */
	  if (!validate_change (v->insn, v->location, v->new_reg, 0))
	    {
	      if (loop_dump_stream)
		fprintf (loop_dump_stream,
			 "unable to reduce iv to register in insn %d\n",
			 INSN_UID (v->insn));
	      bl->all_reduced = 0;
	      v->ignore = 1;
	      continue;
	    }
	}
      else if (v->replaceable)
	{
	  reg_map[REGNO (v->dest_reg)] = v->new_reg;
	}
      else
	{
	  rtx original_insn = v->insn;
	  rtx note;

	  /* Not replaceable; emit an insn to set the original giv reg from
	     the reduced giv, same as above.  */
	  v->insn = loop_insn_emit_after (loop, 0, original_insn,
					  gen_move_insn (v->dest_reg,
							 v->new_reg));

	  /* The original insn may have a REG_EQUAL note.  This note is
	     now incorrect and may result in invalid substitutions later.
	     The original insn is dead, but may be part of a libcall
	     sequence, which doesn't seem worth the bother of handling.  */
	  note = find_reg_note (original_insn, REG_EQUAL, NULL_RTX);
	  if (note)
	    remove_note (original_insn, note);
	}

      /* When a loop is reversed, givs which depend on the reversed
	 biv, and which are live outside the loop, must be set to their
	 correct final value.  This insn is only needed if the giv is
	 not replaceable.  The correct final value is the same as the
	 value that the giv starts the reversed loop with.  */
      if (bl->reversed && ! v->replaceable)
	loop_iv_add_mult_sink (loop,
			       extend_value_for_giv (v, bl->initial_value),
			       v->mult_val, v->add_val, v->dest_reg);
      else if (v->final_value)
	loop_insn_sink_or_swim (loop,
				gen_load_of_final_value (v->dest_reg,
							 v->final_value));

      if (loop_dump_stream)
	{
	  fprintf (loop_dump_stream, "giv at %d reduced to ",
		   INSN_UID (v->insn));
	  print_simple_rtl (loop_dump_stream, v->new_reg);
	  fprintf (loop_dump_stream, "\n");
	}
    }
}


static int
loop_giv_reduce_benefit (struct loop *loop ATTRIBUTE_UNUSED,
			 struct iv_class *bl, struct induction *v,
			 rtx test_reg)
{
  int add_cost;
  int benefit;

  benefit = v->benefit;
  PUT_MODE (test_reg, v->mode);
  add_cost = iv_add_mult_cost (bl->biv->add_val, v->mult_val,
			       test_reg, test_reg);

  /* Reduce benefit if not replaceable, since we will insert a
     move-insn to replace the insn that calculates this giv.  Don't do
     this unless the giv is a user variable, since it will often be
     marked non-replaceable because of the duplication of the exit
     code outside the loop.  In such a case, the copies we insert are
     dead and will be deleted.  So they don't have a cost.  Similar
     situations exist.  */
  /* ??? The new final_[bg]iv_value code does a much better job of
     finding replaceable giv's, and hence this code may no longer be
     necessary.  */
  if (! v->replaceable && ! bl->eliminable
      && REG_USERVAR_P (v->dest_reg))
    benefit -= copy_cost;

  /* Decrease the benefit to count the add-insns that we will insert
     to increment the reduced reg for the giv.  ??? This can
     overestimate the run-time cost of the additional insns, e.g. if
     there are multiple basic blocks that increment the biv, but only
     one of these blocks is executed during each iteration.  There is
     no good way to detect cases like this with the current structure
     of the loop optimizer.  This code is more accurate for
     determining code size than run-time benefits.  */
  benefit -= add_cost * bl->biv_count;

  /* Decide whether to strength-reduce this giv or to leave the code
     unchanged (recompute it from the biv each time it is used).  This
     decision can be made independently for each giv.  */

#ifdef AUTO_INC_DEC
  /* Attempt to guess whether autoincrement will handle some of the
     new add insns; if so, increase BENEFIT (undo the subtraction of
     add_cost that was done above).  */
  if (v->giv_type == DEST_ADDR
      /* Increasing the benefit is risky, since this is only a guess.
	 Avoid increasing register pressure in cases where there would
	 be no other benefit from reducing this giv.  */
      && benefit > 0
      && GET_CODE (v->mult_val) == CONST_INT)
    {
      int size = GET_MODE_SIZE (GET_MODE (v->mem));

      if (HAVE_POST_INCREMENT
	  && INTVAL (v->mult_val) == size)
	benefit += add_cost * bl->biv_count;
      else if (HAVE_PRE_INCREMENT
	       && INTVAL (v->mult_val) == size)
	benefit += add_cost * bl->biv_count;
      else if (HAVE_POST_DECREMENT
	       && -INTVAL (v->mult_val) == size)
	benefit += add_cost * bl->biv_count;
      else if (HAVE_PRE_DECREMENT
	       && -INTVAL (v->mult_val) == size)
	benefit += add_cost * bl->biv_count;
    }
#endif

  return benefit;
}


/* Free IV structures for LOOP.  */

static void
loop_ivs_free (struct loop *loop)
{
  struct loop_ivs *ivs = LOOP_IVS (loop);
  struct iv_class *iv = ivs->list;

  free (ivs->regs);

  while (iv)
    {
      struct iv_class *next = iv->next;
      struct induction *induction;
      struct induction *next_induction;

      for (induction = iv->biv; induction; induction = next_induction)
	{
	  next_induction = induction->next_iv;
	  free (induction);
	}
      for (induction = iv->giv; induction; induction = next_induction)
	{
	  next_induction = induction->next_iv;
	  free (induction);
	}

      free (iv);
      iv = next;
    }
}

/* Look back before LOOP->START for the insn that sets REG and return
   the equivalent constant if there is a REG_EQUAL note otherwise just
   the SET_SRC of REG.  */

static rtx
loop_find_equiv_value (const struct loop *loop, rtx reg)
{
  rtx loop_start = loop->start;
  rtx insn, set;
  rtx ret;

  ret = reg;
  for (insn = PREV_INSN (loop_start); insn; insn = PREV_INSN (insn))
    {
      if (LABEL_P (insn))
	break;

      else if (INSN_P (insn) && reg_set_p (reg, insn))
	{
	  /* We found the last insn before the loop that sets the register.
	     If it sets the entire register, and has a REG_EQUAL note,
	     then use the value of the REG_EQUAL note.  */
	  if ((set = single_set (insn))
	      && (SET_DEST (set) == reg))
	    {
	      rtx note = find_reg_note (insn, REG_EQUAL, NULL_RTX);

	      /* Only use the REG_EQUAL note if it is a constant.
		 Other things, divide in particular, will cause
		 problems later if we use them.  */
	      if (note && GET_CODE (XEXP (note, 0)) != EXPR_LIST
		  && CONSTANT_P (XEXP (note, 0)))
		ret = XEXP (note, 0);
	      else
		ret = SET_SRC (set);

	      /* We cannot do this if it changes between the
		 assignment and loop start though.  */
	      if (modified_between_p (ret, insn, loop_start))
		ret = reg;
	    }
	  break;
	}
    }
  return ret;
}

/* Find and return register term common to both expressions OP0 and
   OP1 or NULL_RTX if no such term exists.  Each expression must be a
   REG or a PLUS of a REG.  */

static rtx
find_common_reg_term (rtx op0, rtx op1)
{
  if ((REG_P (op0) || GET_CODE (op0) == PLUS)
      && (REG_P (op1) || GET_CODE (op1) == PLUS))
    {
      rtx op00;
      rtx op01;
      rtx op10;
      rtx op11;

      if (GET_CODE (op0) == PLUS)
	op01 = XEXP (op0, 1), op00 = XEXP (op0, 0);
      else
	op01 = const0_rtx, op00 = op0;

      if (GET_CODE (op1) == PLUS)
	op11 = XEXP (op1, 1), op10 = XEXP (op1, 0);
      else
	op11 = const0_rtx, op10 = op1;

      /* Find and return common register term if present.  */
      if (REG_P (op00) && (op00 == op10 || op00 == op11))
	return op00;
      else if (REG_P (op01) && (op01 == op10 || op01 == op11))
	return op01;
    }

  /* No common register term found.  */
  return NULL_RTX;
}

/* Determine the loop iterator and calculate the number of loop
   iterations.  Returns the exact number of loop iterations if it can
   be calculated, otherwise returns zero.  */

static unsigned HOST_WIDE_INT
loop_iterations (struct loop *loop)
{
  struct loop_info *loop_info = LOOP_INFO (loop);
  struct loop_ivs *ivs = LOOP_IVS (loop);
  rtx comparison, comparison_value;
  rtx iteration_var, initial_value, increment, final_value;
  enum rtx_code comparison_code;
  HOST_WIDE_INT inc;
  unsigned HOST_WIDE_INT abs_inc;
  unsigned HOST_WIDE_INT abs_diff;
  int off_by_one;
  int increment_dir;
  int unsigned_p, compare_dir, final_larger;
  rtx last_loop_insn;
  struct iv_class *bl;

  loop_info->n_iterations = 0;
  loop_info->initial_value = 0;
  loop_info->initial_equiv_value = 0;
  loop_info->comparison_value = 0;
  loop_info->final_value = 0;
  loop_info->final_equiv_value = 0;
  loop_info->increment = 0;
  loop_info->iteration_var = 0;
  loop_info->iv = 0;

  /* We used to use prev_nonnote_insn here, but that fails because it might
     accidentally get the branch for a contained loop if the branch for this
     loop was deleted.  We can only trust branches immediately before the
     loop_end.  */
  last_loop_insn = PREV_INSN (loop->end);

  /* ??? We should probably try harder to find the jump insn
     at the end of the loop.  The following code assumes that
     the last loop insn is a jump to the top of the loop.  */
  if (!JUMP_P (last_loop_insn))
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Loop iterations: No final conditional branch found.\n");
      return 0;
    }

  /* If there is a more than a single jump to the top of the loop
     we cannot (easily) determine the iteration count.  */
  if (LABEL_NUSES (JUMP_LABEL (last_loop_insn)) > 1)
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Loop iterations: Loop has multiple back edges.\n");
      return 0;
    }

  /* Find the iteration variable.  If the last insn is a conditional
     branch, and the insn before tests a register value, make that the
     iteration variable.  */

  comparison = get_condition_for_loop (loop, last_loop_insn);
  if (comparison == 0)
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Loop iterations: No final comparison found.\n");
      return 0;
    }

  /* ??? Get_condition may switch position of induction variable and
     invariant register when it canonicalizes the comparison.  */

  comparison_code = GET_CODE (comparison);
  iteration_var = XEXP (comparison, 0);
  comparison_value = XEXP (comparison, 1);

  if (!REG_P (iteration_var))
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Loop iterations: Comparison not against register.\n");
      return 0;
    }

  /* The only new registers that are created before loop iterations
     are givs made from biv increments or registers created by
     load_mems.  In the latter case, it is possible that try_copy_prop
     will propagate a new pseudo into the old iteration register but
     this will be marked by having the REG_USERVAR_P bit set.  */

  if ((unsigned) REGNO (iteration_var) >= ivs->n_regs
      && ! REG_USERVAR_P (iteration_var))
    abort ();

  /* Determine the initial value of the iteration variable, and the amount
     that it is incremented each loop.  Use the tables constructed by
     the strength reduction pass to calculate these values.  */

  /* Clear the result values, in case no answer can be found.  */
  initial_value = 0;
  increment = 0;

  /* The iteration variable can be either a giv or a biv.  Check to see
     which it is, and compute the variable's initial value, and increment
     value if possible.  */

  /* If this is a new register, can't handle it since we don't have any
     reg_iv_type entry for it.  */
  if ((unsigned) REGNO (iteration_var) >= ivs->n_regs)
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Loop iterations: No reg_iv_type entry for iteration var.\n");
      return 0;
    }

  /* Reject iteration variables larger than the host wide int size, since they
     could result in a number of iterations greater than the range of our
     `unsigned HOST_WIDE_INT' variable loop_info->n_iterations.  */
  else if ((GET_MODE_BITSIZE (GET_MODE (iteration_var))
	    > HOST_BITS_PER_WIDE_INT))
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Loop iterations: Iteration var rejected because mode too large.\n");
      return 0;
    }
  else if (GET_MODE_CLASS (GET_MODE (iteration_var)) != MODE_INT)
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Loop iterations: Iteration var not an integer.\n");
      return 0;
    }

  /* Try swapping the comparison to identify a suitable iv.  */
  if (REG_IV_TYPE (ivs, REGNO (iteration_var)) != BASIC_INDUCT
      && REG_IV_TYPE (ivs, REGNO (iteration_var)) != GENERAL_INDUCT
      && REG_P (comparison_value)
      && REGNO (comparison_value) < ivs->n_regs)
    {
      rtx temp = comparison_value;
      comparison_code = swap_condition (comparison_code);
      comparison_value = iteration_var;
      iteration_var = temp;
    }

  if (REG_IV_TYPE (ivs, REGNO (iteration_var)) == BASIC_INDUCT)
    {
      if (REGNO (iteration_var) >= ivs->n_regs)
	abort ();

      /* Grab initial value, only useful if it is a constant.  */
      bl = REG_IV_CLASS (ivs, REGNO (iteration_var));
      initial_value = bl->initial_value;
      if (!bl->biv->always_executed || bl->biv->maybe_multiple)
	{
	  if (loop_dump_stream)
	    fprintf (loop_dump_stream,
		     "Loop iterations: Basic induction var not set once in each iteration.\n");
	  return 0;
	}

      increment = biv_total_increment (bl);
    }
  else if (REG_IV_TYPE (ivs, REGNO (iteration_var)) == GENERAL_INDUCT)
    {
      HOST_WIDE_INT offset = 0;
      struct induction *v = REG_IV_INFO (ivs, REGNO (iteration_var));
      rtx biv_initial_value;

      if (REGNO (v->src_reg) >= ivs->n_regs)
	abort ();

      if (!v->always_executed || v->maybe_multiple)
	{
	  if (loop_dump_stream)
	    fprintf (loop_dump_stream,
		     "Loop iterations: General induction var not set once in each iteration.\n");
	  return 0;
	}

      bl = REG_IV_CLASS (ivs, REGNO (v->src_reg));

      /* Increment value is mult_val times the increment value of the biv.  */

      increment = biv_total_increment (bl);
      if (increment)
	{
	  struct induction *biv_inc;

	  increment = fold_rtx_mult_add (v->mult_val,
					 extend_value_for_giv (v, increment),
					 const0_rtx, v->mode);
	  /* The caller assumes that one full increment has occurred at the
	     first loop test.  But that's not true when the biv is incremented
	     after the giv is set (which is the usual case), e.g.:
	     i = 6; do {;} while (i++ < 9) .
	     Therefore, we bias the initial value by subtracting the amount of
	     the increment that occurs between the giv set and the giv test.  */
	  for (biv_inc = bl->biv; biv_inc; biv_inc = biv_inc->next_iv)
	    {
	      if (loop_insn_first_p (v->insn, biv_inc->insn))
		{
		  if (REG_P (biv_inc->add_val))
		    {
		      if (loop_dump_stream)
			fprintf (loop_dump_stream,
				 "Loop iterations: Basic induction var add_val is REG %d.\n",
				 REGNO (biv_inc->add_val));
			return 0;
		    }

		  /* If we have already counted it, skip it.  */
		  if (biv_inc->same)
		    continue;

		  offset -= INTVAL (biv_inc->add_val);
		}
	    }
	}
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Loop iterations: Giv iterator, initial value bias %ld.\n",
		 (long) offset);

      /* Initial value is mult_val times the biv's initial value plus
	 add_val.  Only useful if it is a constant.  */
      biv_initial_value = extend_value_for_giv (v, bl->initial_value);
      initial_value
	= fold_rtx_mult_add (v->mult_val,
			     plus_constant (biv_initial_value, offset),
			     v->add_val, v->mode);
    }
  else
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Loop iterations: Not basic or general induction var.\n");
      return 0;
    }

  if (initial_value == 0)
    return 0;

  unsigned_p = 0;
  off_by_one = 0;
  switch (comparison_code)
    {
    case LEU:
      unsigned_p = 1;
    case LE:
      compare_dir = 1;
      off_by_one = 1;
      break;
    case GEU:
      unsigned_p = 1;
    case GE:
      compare_dir = -1;
      off_by_one = -1;
      break;
    case EQ:
      /* Cannot determine loop iterations with this case.  */
      compare_dir = 0;
      break;
    case LTU:
      unsigned_p = 1;
    case LT:
      compare_dir = 1;
      break;
    case GTU:
      unsigned_p = 1;
    case GT:
      compare_dir = -1;
      break;
    case NE:
      compare_dir = 0;
      break;
    default:
      abort ();
    }

  /* If the comparison value is an invariant register, then try to find
     its value from the insns before the start of the loop.  */

  final_value = comparison_value;
  if (REG_P (comparison_value)
      && loop_invariant_p (loop, comparison_value))
    {
      final_value = loop_find_equiv_value (loop, comparison_value);

      /* If we don't get an invariant final value, we are better
	 off with the original register.  */
      if (! loop_invariant_p (loop, final_value))
	final_value = comparison_value;
    }

  /* Calculate the approximate final value of the induction variable
     (on the last successful iteration).  The exact final value
     depends on the branch operator, and increment sign.  It will be
     wrong if the iteration variable is not incremented by one each
     time through the loop and (comparison_value + off_by_one -
     initial_value) % increment != 0.
     ??? Note that the final_value may overflow and thus final_larger
     will be bogus.  A potentially infinite loop will be classified
     as immediate, e.g. for (i = 0x7ffffff0; i <= 0x7fffffff; i++)  */
  if (off_by_one)
    final_value = plus_constant (final_value, off_by_one);

  /* Save the calculated values describing this loop's bounds, in case
     precondition_loop_p will need them later.  These values can not be
     recalculated inside precondition_loop_p because strength reduction
     optimizations may obscure the loop's structure.

     These values are only required by precondition_loop_p and insert_bct
     whenever the number of iterations cannot be computed at compile time.
     Only the difference between final_value and initial_value is
     important.  Note that final_value is only approximate.  */
  loop_info->initial_value = initial_value;
  loop_info->comparison_value = comparison_value;
  loop_info->final_value = plus_constant (comparison_value, off_by_one);
  loop_info->increment = increment;
  loop_info->iteration_var = iteration_var;
  loop_info->comparison_code = comparison_code;
  loop_info->iv = bl;

  /* Try to determine the iteration count for loops such
     as (for i = init; i < init + const; i++).  When running the
     loop optimization twice, the first pass often converts simple
     loops into this form.  */

  if (REG_P (initial_value))
    {
      rtx reg1;
      rtx reg2;
      rtx const2;

      reg1 = initial_value;
      if (GET_CODE (final_value) == PLUS)
	reg2 = XEXP (final_value, 0), const2 = XEXP (final_value, 1);
      else
	reg2 = final_value, const2 = const0_rtx;

      /* Check for initial_value = reg1, final_value = reg2 + const2,
	 where reg1 != reg2.  */
      if (REG_P (reg2) && reg2 != reg1)
	{
	  rtx temp;

	  /* Find what reg1 is equivalent to.  Hopefully it will
	     either be reg2 or reg2 plus a constant.  */
	  temp = loop_find_equiv_value (loop, reg1);

	  if (find_common_reg_term (temp, reg2))
	    initial_value = temp;
	  else if (loop_invariant_p (loop, reg2))
	    {
	      /* Find what reg2 is equivalent to.  Hopefully it will
		 either be reg1 or reg1 plus a constant.  Let's ignore
		 the latter case for now since it is not so common.  */
	      temp = loop_find_equiv_value (loop, reg2);

	      if (temp == loop_info->iteration_var)
		temp = initial_value;
	      if (temp == reg1)
		final_value = (const2 == const0_rtx)
		  ? reg1 : gen_rtx_PLUS (GET_MODE (reg1), reg1, const2);
	    }
	}
    }

  loop_info->initial_equiv_value = initial_value;
  loop_info->final_equiv_value = final_value;

  /* For EQ comparison loops, we don't have a valid final value.
     Check this now so that we won't leave an invalid value if we
     return early for any other reason.  */
  if (comparison_code == EQ)
    loop_info->final_equiv_value = loop_info->final_value = 0;

  if (increment == 0)
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Loop iterations: Increment value can't be calculated.\n");
      return 0;
    }

  if (GET_CODE (increment) != CONST_INT)
    {
      /* If we have a REG, check to see if REG holds a constant value.  */
      /* ??? Other RTL, such as (neg (reg)) is possible here, but it isn't
	 clear if it is worthwhile to try to handle such RTL.  */
      if (REG_P (increment) || GET_CODE (increment) == SUBREG)
	increment = loop_find_equiv_value (loop, increment);

      if (GET_CODE (increment) != CONST_INT)
	{
	  if (loop_dump_stream)
	    {
	      fprintf (loop_dump_stream,
		       "Loop iterations: Increment value not constant ");
	      print_simple_rtl (loop_dump_stream, increment);
	      fprintf (loop_dump_stream, ".\n");
	    }
	  return 0;
	}
      loop_info->increment = increment;
    }

  if (GET_CODE (initial_value) != CONST_INT)
    {
      if (loop_dump_stream)
	{
	  fprintf (loop_dump_stream,
		   "Loop iterations: Initial value not constant ");
	  print_simple_rtl (loop_dump_stream, initial_value);
	  fprintf (loop_dump_stream, ".\n");
	}
      return 0;
    }
  else if (GET_CODE (final_value) != CONST_INT)
    {
      if (loop_dump_stream)
	{
	  fprintf (loop_dump_stream,
		   "Loop iterations: Final value not constant ");
	  print_simple_rtl (loop_dump_stream, final_value);
	  fprintf (loop_dump_stream, ".\n");
	}
      return 0;
    }
  else if (comparison_code == EQ)
    {
      rtx inc_once;

      if (loop_dump_stream)
	fprintf (loop_dump_stream, "Loop iterations: EQ comparison loop.\n");

      inc_once = gen_int_mode (INTVAL (initial_value) + INTVAL (increment),
			       GET_MODE (iteration_var));

      if (inc_once == final_value)
	{
	  /* The iterator value once through the loop is equal to the
	     comparison value.  Either we have an infinite loop, or
	     we'll loop twice.  */
	  if (increment == const0_rtx)
	    return 0;
	  loop_info->n_iterations = 2;
	}
      else
	loop_info->n_iterations = 1;

      if (GET_CODE (loop_info->initial_value) == CONST_INT)
	loop_info->final_value
	  = gen_int_mode ((INTVAL (loop_info->initial_value)
			   + loop_info->n_iterations * INTVAL (increment)),
			  GET_MODE (iteration_var));
      else
	loop_info->final_value
	  = plus_constant (loop_info->initial_value,
			   loop_info->n_iterations * INTVAL (increment));
      loop_info->final_equiv_value
	= gen_int_mode ((INTVAL (initial_value)
			 + loop_info->n_iterations * INTVAL (increment)),
			GET_MODE (iteration_var));
      return loop_info->n_iterations;
    }

  /* Final_larger is 1 if final larger, 0 if they are equal, otherwise -1.  */
  if (unsigned_p)
    final_larger
      = ((unsigned HOST_WIDE_INT) INTVAL (final_value)
	 > (unsigned HOST_WIDE_INT) INTVAL (initial_value))
	- ((unsigned HOST_WIDE_INT) INTVAL (final_value)
	   < (unsigned HOST_WIDE_INT) INTVAL (initial_value));
  else
    final_larger = (INTVAL (final_value) > INTVAL (initial_value))
      - (INTVAL (final_value) < INTVAL (initial_value));

  if (INTVAL (increment) > 0)
    increment_dir = 1;
  else if (INTVAL (increment) == 0)
    increment_dir = 0;
  else
    increment_dir = -1;

  /* There are 27 different cases: compare_dir = -1, 0, 1;
     final_larger = -1, 0, 1; increment_dir = -1, 0, 1.
     There are 4 normal cases, 4 reverse cases (where the iteration variable
     will overflow before the loop exits), 4 infinite loop cases, and 15
     immediate exit (0 or 1 iteration depending on loop type) cases.
     Only try to optimize the normal cases.  */

  /* (compare_dir/final_larger/increment_dir)
     Normal cases: (0/-1/-1), (0/1/1), (-1/-1/-1), (1/1/1)
     Reverse cases: (0/-1/1), (0/1/-1), (-1/-1/1), (1/1/-1)
     Infinite loops: (0/-1/0), (0/1/0), (-1/-1/0), (1/1/0)
     Immediate exit: (0/0/X), (-1/0/X), (-1/1/X), (1/0/X), (1/-1/X) */

  /* ?? If the meaning of reverse loops (where the iteration variable
     will overflow before the loop exits) is undefined, then could
     eliminate all of these special checks, and just always assume
     the loops are normal/immediate/infinite.  Note that this means
     the sign of increment_dir does not have to be known.  Also,
     since it does not really hurt if immediate exit loops or infinite loops
     are optimized, then that case could be ignored also, and hence all
     loops can be optimized.

     According to ANSI Spec, the reverse loop case result is undefined,
     because the action on overflow is undefined.

     See also the special test for NE loops below.  */

  if (final_larger == increment_dir && final_larger != 0
      && (final_larger == compare_dir || compare_dir == 0))
    /* Normal case.  */
    ;
  else
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream, "Loop iterations: Not normal loop.\n");
      return 0;
    }

  /* Calculate the number of iterations, final_value is only an approximation,
     so correct for that.  Note that abs_diff and n_iterations are
     unsigned, because they can be as large as 2^n - 1.  */

  inc = INTVAL (increment);
  if (inc > 0)
    {
      abs_diff = INTVAL (final_value) - INTVAL (initial_value);
      abs_inc = inc;
    }
  else if (inc < 0)
    {
      abs_diff = INTVAL (initial_value) - INTVAL (final_value);
      abs_inc = -inc;
    }
  else
    abort ();

  /* Given that iteration_var is going to iterate over its own mode,
     not HOST_WIDE_INT, disregard higher bits that might have come
     into the picture due to sign extension of initial and final
     values.  */
  abs_diff &= ((unsigned HOST_WIDE_INT) 1
	       << (GET_MODE_BITSIZE (GET_MODE (iteration_var)) - 1)
	       << 1) - 1;

  /* For NE tests, make sure that the iteration variable won't miss
     the final value.  If abs_diff mod abs_incr is not zero, then the
     iteration variable will overflow before the loop exits, and we
     can not calculate the number of iterations.  */
  if (compare_dir == 0 && (abs_diff % abs_inc) != 0)
    return 0;

  /* Note that the number of iterations could be calculated using
     (abs_diff + abs_inc - 1) / abs_inc, provided care was taken to
     handle potential overflow of the summation.  */
  loop_info->n_iterations = abs_diff / abs_inc + ((abs_diff % abs_inc) != 0);
  return loop_info->n_iterations;
}

/* Perform strength reduction and induction variable elimination.

   Pseudo registers created during this function will be beyond the
   last valid index in several tables including
   REGS->ARRAY[I].N_TIMES_SET and REGNO_LAST_UID.  This does not cause a
   problem here, because the added registers cannot be givs outside of
   their loop, and hence will never be reconsidered.  But scan_loop
   must check regnos to make sure they are in bounds.  */

static void
strength_reduce (struct loop *loop, int flags)
{
  struct loop_info *loop_info = LOOP_INFO (loop);
  struct loop_regs *regs = LOOP_REGS (loop);
  struct loop_ivs *ivs = LOOP_IVS (loop);
  rtx p;
  /* Temporary list pointer for traversing ivs->list.  */
  struct iv_class *bl;
  /* Ratio of extra register life span we can justify
     for saving an instruction.  More if loop doesn't call subroutines
     since in that case saving an insn makes more difference
     and more registers are available.  */
  /* ??? could set this to last value of threshold in move_movables */
  int threshold = (loop_info->has_call ? 1 : 2) * (3 + n_non_fixed_regs);
  /* Map of pseudo-register replacements.  */
  rtx *reg_map = NULL;
  int reg_map_size;
  rtx test_reg = gen_rtx_REG (word_mode, LAST_VIRTUAL_REGISTER + 1);
  int insn_count = count_insns_in_loop (loop);

  addr_placeholder = gen_reg_rtx (Pmode);

  ivs->n_regs = max_reg_before_loop;
  ivs->regs = xcalloc (ivs->n_regs, sizeof (struct iv));

  /* Find all BIVs in loop.  */
  loop_bivs_find (loop);

  /* Exit if there are no bivs.  */
  if (! ivs->list)
    {
      loop_ivs_free (loop);
      return;
    }

  /* Determine how BIVS are initialized by looking through pre-header
     extended basic block.  */
  loop_bivs_init_find (loop);

  /* Look at the each biv and see if we can say anything better about its
     initial value from any initializing insns set up above.  */
  loop_bivs_check (loop);

  /* Search the loop for general induction variables.  */
  loop_givs_find (loop);

  /* Try to calculate and save the number of loop iterations.  This is
     set to zero if the actual number can not be calculated.  This must
     be called after all giv's have been identified, since otherwise it may
     fail if the iteration variable is a giv.  */
  loop_iterations (loop);

#ifdef HAVE_prefetch
  if (flags & LOOP_PREFETCH)
    emit_prefetch_instructions (loop);
#endif

  /* Now for each giv for which we still don't know whether or not it is
     replaceable, check to see if it is replaceable because its final value
     can be calculated.  This must be done after loop_iterations is called,
     so that final_giv_value will work correctly.  */
  loop_givs_check (loop);

  /* Try to prove that the loop counter variable (if any) is always
     nonnegative; if so, record that fact with a REG_NONNEG note
     so that "decrement and branch until zero" insn can be used.  */
  check_dbra_loop (loop, insn_count);

  /* Create reg_map to hold substitutions for replaceable giv regs.
     Some givs might have been made from biv increments, so look at
     ivs->reg_iv_type for a suitable size.  */
  reg_map_size = ivs->n_regs;
  reg_map = xcalloc (reg_map_size, sizeof (rtx));

  /* Examine each iv class for feasibility of strength reduction/induction
     variable elimination.  */

  for (bl = ivs->list; bl; bl = bl->next)
    {
      struct induction *v;
      int benefit;

      /* Test whether it will be possible to eliminate this biv
	 provided all givs are reduced.  */
      bl->eliminable = loop_biv_eliminable_p (loop, bl, threshold, insn_count);

      /* This will be true at the end, if all givs which depend on this
	 biv have been strength reduced.
	 We can't (currently) eliminate the biv unless this is so.  */
      bl->all_reduced = 1;

      /* Check each extension dependent giv in this class to see if its
	 root biv is safe from wrapping in the interior mode.  */
      check_ext_dependent_givs (loop, bl);

      /* Combine all giv's for this iv_class.  */
      combine_givs (regs, bl);

      for (v = bl->giv; v; v = v->next_iv)
	{
	  struct induction *tv;

	  if (v->ignore || v->same)
	    continue;

	  benefit = loop_giv_reduce_benefit (loop, bl, v, test_reg);

	  /* If an insn is not to be strength reduced, then set its ignore
	     flag, and clear bl->all_reduced.  */

	  /* A giv that depends on a reversed biv must be reduced if it is
	     used after the loop exit, otherwise, it would have the wrong
	     value after the loop exit.  To make it simple, just reduce all
	     of such giv's whether or not we know they are used after the loop
	     exit.  */

	  if (v->lifetime * threshold * benefit < insn_count
	      && ! bl->reversed)
	    {
	      if (loop_dump_stream)
		fprintf (loop_dump_stream,
			 "giv of insn %d not worth while, %d vs %d.\n",
			 INSN_UID (v->insn),
			 v->lifetime * threshold * benefit, insn_count);
	      v->ignore = 1;
	      bl->all_reduced = 0;
	    }
	  else
	    {
	      /* Check that we can increment the reduced giv without a
		 multiply insn.  If not, reject it.  */

	      for (tv = bl->biv; tv; tv = tv->next_iv)
		if (tv->mult_val == const1_rtx
		    && ! product_cheap_p (tv->add_val, v->mult_val))
		  {
		    if (loop_dump_stream)
		      fprintf (loop_dump_stream,
			       "giv of insn %d: would need a multiply.\n",
			       INSN_UID (v->insn));
		    v->ignore = 1;
		    bl->all_reduced = 0;
		    break;
		  }
	    }
	}

      /* Check for givs whose first use is their definition and whose
	 last use is the definition of another giv.  If so, it is likely
	 dead and should not be used to derive another giv nor to
	 eliminate a biv.  */
      loop_givs_dead_check (loop, bl);

      /* Reduce each giv that we decided to reduce.  */
      loop_givs_reduce (loop, bl);

      /* Rescan all givs.  If a giv is the same as a giv not reduced, mark it
	 as not reduced.

	 For each giv register that can be reduced now: if replaceable,
	 substitute reduced reg wherever the old giv occurs;
	 else add new move insn "giv_reg = reduced_reg".  */
      loop_givs_rescan (loop, bl, reg_map);

      /* All the givs based on the biv bl have been reduced if they
	 merit it.  */

      /* For each giv not marked as maybe dead that has been combined with a
	 second giv, clear any "maybe dead" mark on that second giv.
	 v->new_reg will either be or refer to the register of the giv it
	 combined with.

	 Doing this clearing avoids problems in biv elimination where
	 a giv's new_reg is a complex value that can't be put in the
	 insn but the giv combined with (with a reg as new_reg) is
	 marked maybe_dead.  Since the register will be used in either
	 case, we'd prefer it be used from the simpler giv.  */

      for (v = bl->giv; v; v = v->next_iv)
	if (! v->maybe_dead && v->same)
	  v->same->maybe_dead = 0;

      /* Try to eliminate the biv, if it is a candidate.
	 This won't work if ! bl->all_reduced,
	 since the givs we planned to use might not have been reduced.

	 We have to be careful that we didn't initially think we could
	 eliminate this biv because of a giv that we now think may be
	 dead and shouldn't be used as a biv replacement.

	 Also, there is the possibility that we may have a giv that looks
	 like it can be used to eliminate a biv, but the resulting insn
	 isn't valid.  This can happen, for example, on the 88k, where a
	 JUMP_INSN can compare a register only with zero.  Attempts to
	 replace it with a compare with a constant will fail.

	 Note that in cases where this call fails, we may have replaced some
	 of the occurrences of the biv with a giv, but no harm was done in
	 doing so in the rare cases where it can occur.  */

      if (bl->all_reduced == 1 && bl->eliminable
	  && maybe_eliminate_biv (loop, bl, 1, threshold, insn_count))
	{
	  /* ?? If we created a new test to bypass the loop entirely,
	     or otherwise drop straight in, based on this test, then
	     we might want to rewrite it also.  This way some later
	     pass has more hope of removing the initialization of this
	     biv entirely.  */

	  /* If final_value != 0, then the biv may be used after loop end
	     and we must emit an insn to set it just in case.

	     Reversed bivs already have an insn after the loop setting their
	     value, so we don't need another one.  We can't calculate the
	     proper final value for such a biv here anyways.  */
	  if (bl->final_value && ! bl->reversed)
	      loop_insn_sink_or_swim (loop,
				      gen_load_of_final_value (bl->biv->dest_reg,
							       bl->final_value));

	  if (loop_dump_stream)
	    fprintf (loop_dump_stream, "Reg %d: biv eliminated\n",
		     bl->regno);
	}
      /* See above note wrt final_value.  But since we couldn't eliminate
	 the biv, we must set the value after the loop instead of before.  */
      else if (bl->final_value && ! bl->reversed)
	loop_insn_sink (loop, gen_load_of_final_value (bl->biv->dest_reg,
						       bl->final_value));
    }

  /* Go through all the instructions in the loop, making all the
     register substitutions scheduled in REG_MAP.  */

  for (p = loop->start; p != loop->end; p = NEXT_INSN (p))
    if (INSN_P (p))
      {
	replace_regs (PATTERN (p), reg_map, reg_map_size, 0);
	replace_regs (REG_NOTES (p), reg_map, reg_map_size, 0);
	INSN_CODE (p) = -1;
      }

  if (loop_dump_stream)
    fprintf (loop_dump_stream, "\n");

  loop_ivs_free (loop);
  if (reg_map)
    free (reg_map);
}

/*Record all basic induction variables calculated in the insn.  */
static rtx
check_insn_for_bivs (struct loop *loop, rtx p, int not_every_iteration,
		     int maybe_multiple)
{
  struct loop_ivs *ivs = LOOP_IVS (loop);
  rtx set;
  rtx dest_reg;
  rtx inc_val;
  rtx mult_val;
  rtx *location;

  if (NONJUMP_INSN_P (p)
      && (set = single_set (p))
      && REG_P (SET_DEST (set)))
    {
      dest_reg = SET_DEST (set);
      if (REGNO (dest_reg) < max_reg_before_loop
	  && REGNO (dest_reg) >= FIRST_PSEUDO_REGISTER
	  && REG_IV_TYPE (ivs, REGNO (dest_reg)) != NOT_BASIC_INDUCT)
	{
	  if (basic_induction_var (loop, SET_SRC (set),
				   GET_MODE (SET_SRC (set)),
				   dest_reg, p, &inc_val, &mult_val,
				   &location))
	    {
	      /* It is a possible basic induction variable.
	         Create and initialize an induction structure for it.  */

	      struct induction *v = xmalloc (sizeof (struct induction));

	      record_biv (loop, v, p, dest_reg, inc_val, mult_val, location,
			  not_every_iteration, maybe_multiple);
	      REG_IV_TYPE (ivs, REGNO (dest_reg)) = BASIC_INDUCT;
	    }
	  else if (REGNO (dest_reg) < ivs->n_regs)
	    REG_IV_TYPE (ivs, REGNO (dest_reg)) = NOT_BASIC_INDUCT;
	}
    }
  return p;
}

/* Record all givs calculated in the insn.
   A register is a giv if: it is only set once, it is a function of a
   biv and a constant (or invariant), and it is not a biv.  */
static rtx
check_insn_for_givs (struct loop *loop, rtx p, int not_every_iteration,
		     int maybe_multiple)
{
  struct loop_regs *regs = LOOP_REGS (loop);

  rtx set;
  /* Look for a general induction variable in a register.  */
  if (NONJUMP_INSN_P (p)
      && (set = single_set (p))
      && REG_P (SET_DEST (set))
      && ! regs->array[REGNO (SET_DEST (set))].may_not_optimize)
    {
      rtx src_reg;
      rtx dest_reg;
      rtx add_val;
      rtx mult_val;
      rtx ext_val;
      int benefit;
      rtx regnote = 0;
      rtx last_consec_insn;

      dest_reg = SET_DEST (set);
      if (REGNO (dest_reg) < FIRST_PSEUDO_REGISTER)
	return p;

      if (/* SET_SRC is a giv.  */
	  (general_induction_var (loop, SET_SRC (set), &src_reg, &add_val,
				  &mult_val, &ext_val, 0, &benefit, VOIDmode)
	   /* Equivalent expression is a giv.  */
	   || ((regnote = find_reg_note (p, REG_EQUAL, NULL_RTX))
	       && general_induction_var (loop, XEXP (regnote, 0), &src_reg,
					 &add_val, &mult_val, &ext_val, 0,
					 &benefit, VOIDmode)))
	  /* Don't try to handle any regs made by loop optimization.
	     We have nothing on them in regno_first_uid, etc.  */
	  && REGNO (dest_reg) < max_reg_before_loop
	  /* Don't recognize a BASIC_INDUCT_VAR here.  */
	  && dest_reg != src_reg
	  /* This must be the only place where the register is set.  */
	  && (regs->array[REGNO (dest_reg)].n_times_set == 1
	      /* or all sets must be consecutive and make a giv.  */
	      || (benefit = consec_sets_giv (loop, benefit, p,
					     src_reg, dest_reg,
					     &add_val, &mult_val, &ext_val,
					     &last_consec_insn))))
	{
	  struct induction *v = xmalloc (sizeof (struct induction));

	  /* If this is a library call, increase benefit.  */
	  if (find_reg_note (p, REG_RETVAL, NULL_RTX))
	    benefit += libcall_benefit (p);

	  /* Skip the consecutive insns, if there are any.  */
	  if (regs->array[REGNO (dest_reg)].n_times_set != 1)
	    p = last_consec_insn;

	  record_giv (loop, v, p, src_reg, dest_reg, mult_val, add_val,
		      ext_val, benefit, DEST_REG, not_every_iteration,
		      maybe_multiple, (rtx*) 0);

	}
    }

  /* Look for givs which are memory addresses.  */
  if (NONJUMP_INSN_P (p))
    find_mem_givs (loop, PATTERN (p), p, not_every_iteration,
		   maybe_multiple);

  /* Update the status of whether giv can derive other givs.  This can
     change when we pass a label or an insn that updates a biv.  */
  if (INSN_P (p) || LABEL_P (p))
    update_giv_derive (loop, p);
  return p;
}

/* Return 1 if X is a valid source for an initial value (or as value being
   compared against in an initial test).

   X must be either a register or constant and must not be clobbered between
   the current insn and the start of the loop.

   INSN is the insn containing X.  */

static int
valid_initial_value_p (rtx x, rtx insn, int call_seen, rtx loop_start)
{
  if (CONSTANT_P (x))
    return 1;

  /* Only consider pseudos we know about initialized in insns whose luids
     we know.  */
  if (!REG_P (x)
      || REGNO (x) >= max_reg_before_loop)
    return 0;

  /* Don't use call-clobbered registers across a call which clobbers it.  On
     some machines, don't use any hard registers at all.  */
  if (REGNO (x) < FIRST_PSEUDO_REGISTER
      && (SMALL_REGISTER_CLASSES
	  || (call_used_regs[REGNO (x)] && call_seen)))
    return 0;

  /* Don't use registers that have been clobbered before the start of the
     loop.  */
  if (reg_set_between_p (x, insn, loop_start))
    return 0;

  return 1;
}

/* Scan X for memory refs and check each memory address
   as a possible giv.  INSN is the insn whose pattern X comes from.
   NOT_EVERY_ITERATION is 1 if the insn might not be executed during
   every loop iteration.  MAYBE_MULTIPLE is 1 if the insn might be executed
   more than once in each loop iteration.  */

static void
find_mem_givs (const struct loop *loop, rtx x, rtx insn,
	       int not_every_iteration, int maybe_multiple)
{
  int i, j;
  enum rtx_code code;
  const char *fmt;

  if (x == 0)
    return;

  code = GET_CODE (x);
  switch (code)
    {
    case REG:
    case CONST_INT:
    case CONST:
    case CONST_DOUBLE:
    case SYMBOL_REF:
    case LABEL_REF:
    case PC:
    case CC0:
    case ADDR_VEC:
    case ADDR_DIFF_VEC:
    case USE:
    case CLOBBER:
      return;

    case MEM:
      {
	rtx src_reg;
	rtx add_val;
	rtx mult_val;
	rtx ext_val;
	int benefit;

	/* This code used to disable creating GIVs with mult_val == 1 and
	   add_val == 0.  However, this leads to lost optimizations when
	   it comes time to combine a set of related DEST_ADDR GIVs, since
	   this one would not be seen.  */

	if (general_induction_var (loop, XEXP (x, 0), &src_reg, &add_val,
				   &mult_val, &ext_val, 1, &benefit,
				   GET_MODE (x)))
	  {
	    /* Found one; record it.  */
	    struct induction *v = xmalloc (sizeof (struct induction));

	    record_giv (loop, v, insn, src_reg, addr_placeholder, mult_val,
			add_val, ext_val, benefit, DEST_ADDR,
			not_every_iteration, maybe_multiple, &XEXP (x, 0));

	    v->mem = x;
	  }
      }
      return;

    default:
      break;
    }

  /* Recursively scan the subexpressions for other mem refs.  */

  fmt = GET_RTX_FORMAT (code);
  for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
    if (fmt[i] == 'e')
      find_mem_givs (loop, XEXP (x, i), insn, not_every_iteration,
		     maybe_multiple);
    else if (fmt[i] == 'E')
      for (j = 0; j < XVECLEN (x, i); j++)
	find_mem_givs (loop, XVECEXP (x, i, j), insn, not_every_iteration,
		       maybe_multiple);
}

/* Fill in the data about one biv update.
   V is the `struct induction' in which we record the biv.  (It is
   allocated by the caller, with alloca.)
   INSN is the insn that sets it.
   DEST_REG is the biv's reg.

   MULT_VAL is const1_rtx if the biv is being incremented here, in which case
   INC_VAL is the increment.  Otherwise, MULT_VAL is const0_rtx and the biv is
   being set to INC_VAL.

   NOT_EVERY_ITERATION is nonzero if this biv update is not know to be
   executed every iteration; MAYBE_MULTIPLE is nonzero if this biv update
   can be executed more than once per iteration.  If MAYBE_MULTIPLE
   and NOT_EVERY_ITERATION are both zero, we know that the biv update is
   executed exactly once per iteration.  */

static void
record_biv (struct loop *loop, struct induction *v, rtx insn, rtx dest_reg,
	    rtx inc_val, rtx mult_val, rtx *location,
	    int not_every_iteration, int maybe_multiple)
{
  struct loop_ivs *ivs = LOOP_IVS (loop);
  struct iv_class *bl;

  v->insn = insn;
  v->src_reg = dest_reg;
  v->dest_reg = dest_reg;
  v->mult_val = mult_val;
  v->add_val = inc_val;
  v->ext_dependent = NULL_RTX;
  v->location = location;
  v->mode = GET_MODE (dest_reg);
  v->always_computable = ! not_every_iteration;
  v->always_executed = ! not_every_iteration;
  v->maybe_multiple = maybe_multiple;
  v->same = 0;

  /* Add this to the reg's iv_class, creating a class
     if this is the first incrementation of the reg.  */

  bl = REG_IV_CLASS (ivs, REGNO (dest_reg));
  if (bl == 0)
    {
      /* Create and initialize new iv_class.  */

      bl = xmalloc (sizeof (struct iv_class));

      bl->regno = REGNO (dest_reg);
      bl->biv = 0;
      bl->giv = 0;
      bl->biv_count = 0;
      bl->giv_count = 0;

      /* Set initial value to the reg itself.  */
      bl->initial_value = dest_reg;
      bl->final_value = 0;
      /* We haven't seen the initializing insn yet.  */
      bl->init_insn = 0;
      bl->init_set = 0;
      bl->initial_test = 0;
      bl->incremented = 0;
      bl->eliminable = 0;
      bl->nonneg = 0;
      bl->reversed = 0;
      bl->total_benefit = 0;

      /* Add this class to ivs->list.  */
      bl->next = ivs->list;
      ivs->list = bl;

      /* Put it in the array of biv register classes.  */
      REG_IV_CLASS (ivs, REGNO (dest_reg)) = bl;
    }
  else
    {
      /* Check if location is the same as a previous one.  */
      struct induction *induction;
      for (induction = bl->biv; induction; induction = induction->next_iv)
	if (location == induction->location)
	  {
	    v->same = induction;
	    break;
	  }
    }

  /* Update IV_CLASS entry for this biv.  */
  v->next_iv = bl->biv;
  bl->biv = v;
  bl->biv_count++;
  if (mult_val == const1_rtx)
    bl->incremented = 1;

  if (loop_dump_stream)
    loop_biv_dump (v, loop_dump_stream, 0);
}

/* Fill in the data about one giv.
   V is the `struct induction' in which we record the giv.  (It is
   allocated by the caller, with alloca.)
   INSN is the insn that sets it.
   BENEFIT estimates the savings from deleting this insn.
   TYPE is DEST_REG or DEST_ADDR; it says whether the giv is computed
   into a register or is used as a memory address.

   SRC_REG is the biv reg which the giv is computed from.
   DEST_REG is the giv's reg (if the giv is stored in a reg).
   MULT_VAL and ADD_VAL are the coefficients used to compute the giv.
   LOCATION points to the place where this giv's value appears in INSN.  */

static void
record_giv (const struct loop *loop, struct induction *v, rtx insn,
	    rtx src_reg, rtx dest_reg, rtx mult_val, rtx add_val,
	    rtx ext_val, int benefit, enum g_types type,
	    int not_every_iteration, int maybe_multiple, rtx *location)
{
  struct loop_ivs *ivs = LOOP_IVS (loop);
  struct induction *b;
  struct iv_class *bl;
  rtx set = single_set (insn);
  rtx temp;

  /* Attempt to prove constantness of the values.  Don't let simplify_rtx
     undo the MULT canonicalization that we performed earlier.  */
  temp = simplify_rtx (add_val);
  if (temp
      && ! (GET_CODE (add_val) == MULT
	    && GET_CODE (temp) == ASHIFT))
    add_val = temp;

  v->insn = insn;
  v->src_reg = src_reg;
  v->giv_type = type;
  v->dest_reg = dest_reg;
  v->mult_val = mult_val;
  v->add_val = add_val;
  v->ext_dependent = ext_val;
  v->benefit = benefit;
  v->location = location;
  v->cant_derive = 0;
  v->combined_with = 0;
  v->maybe_multiple = maybe_multiple;
  v->maybe_dead = 0;
  v->derive_adjustment = 0;
  v->same = 0;
  v->ignore = 0;
  v->new_reg = 0;
  v->final_value = 0;
  v->same_insn = 0;
  v->auto_inc_opt = 0;
  v->shared = 0;

  /* The v->always_computable field is used in update_giv_derive, to
     determine whether a giv can be used to derive another giv.  For a
     DEST_REG giv, INSN computes a new value for the giv, so its value
     isn't computable if INSN insn't executed every iteration.
     However, for a DEST_ADDR giv, INSN merely uses the value of the giv;
     it does not compute a new value.  Hence the value is always computable
     regardless of whether INSN is executed each iteration.  */

  if (type == DEST_ADDR)
    v->always_computable = 1;
  else
    v->always_computable = ! not_every_iteration;

  v->always_executed = ! not_every_iteration;

  if (type == DEST_ADDR)
    {
      v->mode = GET_MODE (*location);
      v->lifetime = 1;
    }
  else /* type == DEST_REG */
    {
      v->mode = GET_MODE (SET_DEST (set));

      v->lifetime = LOOP_REG_LIFETIME (loop, REGNO (dest_reg));

      /* If the lifetime is zero, it means that this register is
	 really a dead store.  So mark this as a giv that can be
	 ignored.  This will not prevent the biv from being eliminated.  */
      if (v->lifetime == 0)
	v->ignore = 1;

      REG_IV_TYPE (ivs, REGNO (dest_reg)) = GENERAL_INDUCT;
      REG_IV_INFO (ivs, REGNO (dest_reg)) = v;
    }

  /* Add the giv to the class of givs computed from one biv.  */

  bl = REG_IV_CLASS (ivs, REGNO (src_reg));
  if (bl)
    {
      v->next_iv = bl->giv;
      bl->giv = v;
      /* Don't count DEST_ADDR.  This is supposed to count the number of
	 insns that calculate givs.  */
      if (type == DEST_REG)
	bl->giv_count++;
      bl->total_benefit += benefit;
    }
  else
    /* Fatal error, biv missing for this giv?  */
    abort ();

  if (type == DEST_ADDR)
    {
      v->replaceable = 1;
      v->not_replaceable = 0;
    }
  else
    {
      /* The giv can be replaced outright by the reduced register only if all
	 of the following conditions are true:
	 - the insn that sets the giv is always executed on any iteration
	   on which the giv is used at all
	   (there are two ways to deduce this:
	    either the insn is executed on every iteration,
	    or all uses follow that insn in the same basic block),
	 - the giv is not used outside the loop
	 - no assignments to the biv occur during the giv's lifetime.  */

      if (REGNO_FIRST_UID (REGNO (dest_reg)) == INSN_UID (insn)
	  /* Previous line always fails if INSN was moved by loop opt.  */
	  && REGNO_LAST_LUID (REGNO (dest_reg))
	  < INSN_LUID (loop->end)
	  && (! not_every_iteration
	      || last_use_this_basic_block (dest_reg, insn)))
	{
	  /* Now check that there are no assignments to the biv within the
	     giv's lifetime.  This requires two separate checks.  */

	  /* Check each biv update, and fail if any are between the first
	     and last use of the giv.

	     If this loop contains an inner loop that was unrolled, then
	     the insn modifying the biv may have been emitted by the loop
	     unrolling code, and hence does not have a valid luid.  Just
	     mark the biv as not replaceable in this case.  It is not very
	     useful as a biv, because it is used in two different loops.
	     It is very unlikely that we would be able to optimize the giv
	     using this biv anyways.  */

	  v->replaceable = 1;
	  v->not_replaceable = 0;
	  for (b = bl->biv; b; b = b->next_iv)
	    {
	      if (INSN_UID (b->insn) >= max_uid_for_loop
		  || ((INSN_LUID (b->insn)
		       >= REGNO_FIRST_LUID (REGNO (dest_reg)))
		      && (INSN_LUID (b->insn)
			  <= REGNO_LAST_LUID (REGNO (dest_reg)))))
		{
		  v->replaceable = 0;
		  v->not_replaceable = 1;
		  break;
		}
	    }

	  /* If there are any backwards branches that go from after the
	     biv update to before it, then this giv is not replaceable.  */
	  if (v->replaceable)
	    for (b = bl->biv; b; b = b->next_iv)
	      if (back_branch_in_range_p (loop, b->insn))
		{
		  v->replaceable = 0;
		  v->not_replaceable = 1;
		  break;
		}
	}
      else
	{
	  /* May still be replaceable, we don't have enough info here to
	     decide.  */
	  v->replaceable = 0;
	  v->not_replaceable = 0;
	}
    }

  /* Record whether the add_val contains a const_int, for later use by
     combine_givs.  */
  {
    rtx tem = add_val;

    v->no_const_addval = 1;
    if (tem == const0_rtx)
      ;
    else if (CONSTANT_P (add_val))
      v->no_const_addval = 0;
    if (GET_CODE (tem) == PLUS)
      {
	while (1)
	  {
	    if (GET_CODE (XEXP (tem, 0)) == PLUS)
	      tem = XEXP (tem, 0);
	    else if (GET_CODE (XEXP (tem, 1)) == PLUS)
	      tem = XEXP (tem, 1);
	    else
	      break;
	  }
	if (CONSTANT_P (XEXP (tem, 1)))
	  v->no_const_addval = 0;
      }
  }

  if (loop_dump_stream)
    loop_giv_dump (v, loop_dump_stream, 0);
}

/* Try to calculate the final value of the giv, the value it will have at
   the end of the loop.  If we can do it, return that value.  */

static rtx
final_giv_value (const struct loop *loop, struct induction *v)
{
  struct loop_ivs *ivs = LOOP_IVS (loop);
  struct iv_class *bl;
  rtx insn;
  rtx increment, tem;
  rtx seq;
  rtx loop_end = loop->end;
  unsigned HOST_WIDE_INT n_iterations = LOOP_INFO (loop)->n_iterations;

  bl = REG_IV_CLASS (ivs, REGNO (v->src_reg));

  /* The final value for givs which depend on reversed bivs must be calculated
     differently than for ordinary givs.  In this case, there is already an
     insn after the loop which sets this giv's final value (if necessary),
     and there are no other loop exits, so we can return any value.  */
  if (bl->reversed)
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Final giv value for %d, depends on reversed biv\n",
		 REGNO (v->dest_reg));
      return const0_rtx;
    }

  /* Try to calculate the final value as a function of the biv it depends
     upon.  The only exit from the loop must be the fall through at the bottom
     and the insn that sets the giv must be executed on every iteration
     (otherwise the giv may not have its final value when the loop exits).  */

  /* ??? Can calculate the final giv value by subtracting off the
     extra biv increments times the giv's mult_val.  The loop must have
     only one exit for this to work, but the loop iterations does not need
     to be known.  */

  if (n_iterations != 0
      && ! loop->exit_count
      && v->always_executed)
    {
      /* ?? It is tempting to use the biv's value here since these insns will
	 be put after the loop, and hence the biv will have its final value
	 then.  However, this fails if the biv is subsequently eliminated.
	 Perhaps determine whether biv's are eliminable before trying to
	 determine whether giv's are replaceable so that we can use the
	 biv value here if it is not eliminable.  */

      /* We are emitting code after the end of the loop, so we must make
	 sure that bl->initial_value is still valid then.  It will still
	 be valid if it is invariant.  */

      increment = biv_total_increment (bl);

      if (increment && loop_invariant_p (loop, increment)
	  && loop_invariant_p (loop, bl->initial_value))
	{
	  /* Can calculate the loop exit value of its biv as
	     (n_iterations * increment) + initial_value */

	  /* The loop exit value of the giv is then
	     (final_biv_value - extra increments) * mult_val + add_val.
	     The extra increments are any increments to the biv which
	     occur in the loop after the giv's value is calculated.
	     We must search from the insn that sets the giv to the end
	     of the loop to calculate this value.  */

	  /* Put the final biv value in tem.  */
	  tem = gen_reg_rtx (v->mode);
	  record_base_value (REGNO (tem), bl->biv->add_val, 0);
	  loop_iv_add_mult_sink (loop, extend_value_for_giv (v, increment),
				 GEN_INT (n_iterations),
				 extend_value_for_giv (v, bl->initial_value),
				 tem);

	  /* Subtract off extra increments as we find them.  */
	  for (insn = NEXT_INSN (v->insn); insn != loop_end;
	       insn = NEXT_INSN (insn))
	    {
	      struct induction *biv;

	      for (biv = bl->biv; biv; biv = biv->next_iv)
		if (biv->insn == insn)
		  {
		    start_sequence ();
		    tem = expand_simple_binop (GET_MODE (tem), MINUS, tem,
					       biv->add_val, NULL_RTX, 0,
					       OPTAB_LIB_WIDEN);
		    seq = get_insns ();
		    end_sequence ();
		    loop_insn_sink (loop, seq);
		  }
	    }

	  /* Now calculate the giv's final value.  */
	  loop_iv_add_mult_sink (loop, tem, v->mult_val, v->add_val, tem);

	  if (loop_dump_stream)
	    fprintf (loop_dump_stream,
		     "Final giv value for %d, calc from biv's value.\n",
		     REGNO (v->dest_reg));

	  return tem;
	}
    }

  /* Replaceable giv's should never reach here.  */
  if (v->replaceable)
    abort ();

  /* Check to see if the biv is dead at all loop exits.  */
  if (reg_dead_after_loop (loop, v->dest_reg))
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream,
		 "Final giv value for %d, giv dead after loop exit.\n",
		 REGNO (v->dest_reg));

      return const0_rtx;
    }

  return 0;
}

/* All this does is determine whether a giv can be made replaceable because
   its final value can be calculated.  This code can not be part of record_giv
   above, because final_giv_value requires that the number of loop iterations
   be known, and that can not be accurately calculated until after all givs
   have been identified.  */

static void
check_final_value (const struct loop *loop, struct induction *v)
{
  rtx final_value = 0;

  /* DEST_ADDR givs will never reach here, because they are always marked
     replaceable above in record_giv.  */

  /* The giv can be replaced outright by the reduced register only if all
     of the following conditions are true:
     - the insn that sets the giv is always executed on any iteration
       on which the giv is used at all
       (there are two ways to deduce this:
        either the insn is executed on every iteration,
        or all uses follow that insn in the same basic block),
     - its final value can be calculated (this condition is different
       than the one above in record_giv)
     - it's not used before the it's set
     - no assignments to the biv occur during the giv's lifetime.  */

#if 0
  /* This is only called now when replaceable is known to be false.  */
  /* Clear replaceable, so that it won't confuse final_giv_value.  */
  v->replaceable = 0;
#endif

  if ((final_value = final_giv_value (loop, v))
      && (v->always_executed
	  || last_use_this_basic_block (v->dest_reg, v->insn)))
    {
      int biv_increment_seen = 0, before_giv_insn = 0;
      rtx p = v->insn;
      rtx last_giv_use;

      v->replaceable = 1;
      v->not_replaceable = 0;

      /* When trying to determine whether or not a biv increment occurs
	 during the lifetime of the giv, we can ignore uses of the variable
	 outside the loop because final_value is true.  Hence we can not
	 use regno_last_uid and regno_first_uid as above in record_giv.  */

      /* Search the loop to determine whether any assignments to the
	 biv occur during the giv's lifetime.  Start with the insn
	 that sets the giv, and search around the loop until we come
	 back to that insn again.

	 Also fail if there is a jump within the giv's lifetime that jumps
	 to somewhere outside the lifetime but still within the loop.  This
	 catches spaghetti code where the execution order is not linear, and
	 hence the above test fails.  Here we assume that the giv lifetime
	 does not extend from one iteration of the loop to the next, so as
	 to make the test easier.  Since the lifetime isn't known yet,
	 this requires two loops.  See also record_giv above.  */

      last_giv_use = v->insn;

      while (1)
	{
	  p = NEXT_INSN (p);
	  if (p == loop->end)
	    {
	      before_giv_insn = 1;
	      p = NEXT_INSN (loop->start);
	    }
	  if (p == v->insn)
	    break;

	  if (INSN_P (p))
	    {
	      /* It is possible for the BIV increment to use the GIV if we
		 have a cycle.  Thus we must be sure to check each insn for
		 both BIV and GIV uses, and we must check for BIV uses
		 first.  */

	      if (! biv_increment_seen
		  && reg_set_p (v->src_reg, PATTERN (p)))
		biv_increment_seen = 1;

	      if (reg_mentioned_p (v->dest_reg, PATTERN (p)))
		{
		  if (biv_increment_seen || before_giv_insn)
		    {
		      v->replaceable = 0;
		      v->not_replaceable = 1;
		      break;
		    }
		  last_giv_use = p;
		}
	    }
	}

      /* Now that the lifetime of the giv is known, check for branches
	 from within the lifetime to outside the lifetime if it is still
	 replaceable.  */

      if (v->replaceable)
	{
	  p = v->insn;
	  while (1)
	    {
	      p = NEXT_INSN (p);
	      if (p == loop->end)
		p = NEXT_INSN (loop->start);
	      if (p == last_giv_use)
		break;

	      if (JUMP_P (p) && JUMP_LABEL (p)
		  && LABEL_NAME (JUMP_LABEL (p))
		  && ((loop_insn_first_p (JUMP_LABEL (p), v->insn)
		       && loop_insn_first_p (loop->start, JUMP_LABEL (p)))
		      || (loop_insn_first_p (last_giv_use, JUMP_LABEL (p))
			  && loop_insn_first_p (JUMP_LABEL (p), loop->end))))
		{
		  v->replaceable = 0;
		  v->not_replaceable = 1;

		  if (loop_dump_stream)
		    fprintf (loop_dump_stream,
			     "Found branch outside giv lifetime.\n");

		  break;
		}
	    }
	}

      /* If it is replaceable, then save the final value.  */
      if (v->replaceable)
	v->final_value = final_value;
    }

  if (loop_dump_stream && v->replaceable)
    fprintf (loop_dump_stream, "Insn %d: giv reg %d final_value replaceable\n",
	     INSN_UID (v->insn), REGNO (v->dest_reg));
}

/* Update the status of whether a giv can derive other givs.

   We need to do something special if there is or may be an update to the biv
   between the time the giv is defined and the time it is used to derive
   another giv.

   In addition, a giv that is only conditionally set is not allowed to
   derive another giv once a label has been passed.

   The cases we look at are when a label or an update to a biv is passed.  */

static void
update_giv_derive (const struct loop *loop, rtx p)
{
  struct loop_ivs *ivs = LOOP_IVS (loop);
  struct iv_class *bl;
  struct induction *biv, *giv;
  rtx tem;
  int dummy;

  /* Search all IV classes, then all bivs, and finally all givs.

     There are three cases we are concerned with.  First we have the situation
     of a giv that is only updated conditionally.  In that case, it may not
     derive any givs after a label is passed.

     The second case is when a biv update occurs, or may occur, after the
     definition of a giv.  For certain biv updates (see below) that are
     known to occur between the giv definition and use, we can adjust the
     giv definition.  For others, or when the biv update is conditional,
     we must prevent the giv from deriving any other givs.  There are two
     sub-cases within this case.

     If this is a label, we are concerned with any biv update that is done
     conditionally, since it may be done after the giv is defined followed by
     a branch here (actually, we need to pass both a jump and a label, but
     this extra tracking doesn't seem worth it).

     If this is a jump, we are concerned about any biv update that may be
     executed multiple times.  We are actually only concerned about
     backward jumps, but it is probably not worth performing the test
     on the jump again here.

     If this is a biv update, we must adjust the giv status to show that a
     subsequent biv update was performed.  If this adjustment cannot be done,
     the giv cannot derive further givs.  */

  for (bl = ivs->list; bl; bl = bl->next)
    for (biv = bl->biv; biv; biv = biv->next_iv)
      if (LABEL_P (p) || JUMP_P (p)
	  || biv->insn == p)
	{
	  /* Skip if location is the same as a previous one.  */
	  if (biv->same)
	    continue;

	  for (giv = bl->giv; giv; giv = giv->next_iv)
	    {
	      /* If cant_derive is already true, there is no point in
		 checking all of these conditions again.  */
	      if (giv->cant_derive)
		continue;

	      /* If this giv is conditionally set and we have passed a label,
		 it cannot derive anything.  */
	      if (LABEL_P (p) && ! giv->always_computable)
		giv->cant_derive = 1;

	      /* Skip givs that have mult_val == 0, since
		 they are really invariants.  Also skip those that are
		 replaceable, since we know their lifetime doesn't contain
		 any biv update.  */
	      else if (giv->mult_val == const0_rtx || giv->replaceable)
		continue;

	      /* The only way we can allow this giv to derive another
		 is if this is a biv increment and we can form the product
		 of biv->add_val and giv->mult_val.  In this case, we will
		 be able to compute a compensation.  */
	      else if (biv->insn == p)
		{
		  rtx ext_val_dummy;

		  tem = 0;
		  if (biv->mult_val == const1_rtx)
		    tem = simplify_giv_expr (loop,
					     gen_rtx_MULT (giv->mode,
							   biv->add_val,
							   giv->mult_val),
					     &ext_val_dummy, &dummy);

		  if (tem && giv->derive_adjustment)
		    tem = simplify_giv_expr
		      (loop,
		       gen_rtx_PLUS (giv->mode, tem, giv->derive_adjustment),
		       &ext_val_dummy, &dummy);

		  if (tem)
		    giv->derive_adjustment = tem;
		  else
		    giv->cant_derive = 1;
		}
	      else if ((LABEL_P (p) && ! biv->always_computable)
		       || (JUMP_P (p) && biv->maybe_multiple))
		giv->cant_derive = 1;
	    }
	}
}

/* Check whether an insn is an increment legitimate for a basic induction var.
   X is the source of insn P, or a part of it.
   MODE is the mode in which X should be interpreted.

   DEST_REG is the putative biv, also the destination of the insn.
   We accept patterns of these forms:
     REG = REG + INVARIANT (includes REG = REG - CONSTANT)
     REG = INVARIANT + REG

   If X is suitable, we return 1, set *MULT_VAL to CONST1_RTX,
   store the additive term into *INC_VAL, and store the place where
   we found the additive term into *LOCATION.

   If X is an assignment of an invariant into DEST_REG, we set
   *MULT_VAL to CONST0_RTX, and store the invariant into *INC_VAL.

   We also want to detect a BIV when it corresponds to a variable
   whose mode was promoted.  In that case, an increment
   of the variable may be a PLUS that adds a SUBREG of that variable to
   an invariant and then sign- or zero-extends the result of the PLUS
   into the variable.

   Most GIVs in such cases will be in the promoted mode, since that is the
   probably the natural computation mode (and almost certainly the mode
   used for addresses) on the machine.  So we view the pseudo-reg containing
   the variable as the BIV, as if it were simply incremented.

   Note that treating the entire pseudo as a BIV will result in making
   simple increments to any GIVs based on it.  However, if the variable
   overflows in its declared mode but not its promoted mode, the result will
   be incorrect.  This is acceptable if the variable is signed, since
   overflows in such cases are undefined, but not if it is unsigned, since
   those overflows are defined.  So we only check for SIGN_EXTEND and
   not ZERO_EXTEND.

   If we cannot find a biv, we return 0.  */

static int
basic_induction_var (const struct loop *loop, rtx x, enum machine_mode mode,
		     rtx dest_reg, rtx p, rtx *inc_val, rtx *mult_val,
		     rtx **location)
{
  enum rtx_code code;
  rtx *argp, arg;
  rtx insn, set = 0, last, inc;

  code = GET_CODE (x);
  *location = NULL;
  switch (code)
    {
    case PLUS:
      if (rtx_equal_p (XEXP (x, 0), dest_reg)
	  || (GET_CODE (XEXP (x, 0)) == SUBREG
	      && SUBREG_PROMOTED_VAR_P (XEXP (x, 0))
	      && SUBREG_REG (XEXP (x, 0)) == dest_reg))
	{
	  argp = &XEXP (x, 1);
	}
      else if (rtx_equal_p (XEXP (x, 1), dest_reg)
	       || (GET_CODE (XEXP (x, 1)) == SUBREG
		   && SUBREG_PROMOTED_VAR_P (XEXP (x, 1))
		   && SUBREG_REG (XEXP (x, 1)) == dest_reg))
	{
	  argp = &XEXP (x, 0);
	}
      else
	return 0;

      arg = *argp;
      if (loop_invariant_p (loop, arg) != 1)
	return 0;

      /* convert_modes can emit new instructions, e.g. when arg is a loop
	 invariant MEM and dest_reg has a different mode.
	 These instructions would be emitted after the end of the function
	 and then *inc_val would be an uninitialized pseudo.
	 Detect this and bail in this case.
	 Other alternatives to solve this can be introducing a convert_modes
	 variant which is allowed to fail but not allowed to emit new
	 instructions, emit these instructions before loop start and let
	 it be garbage collected if *inc_val is never used or saving the
	 *inc_val initialization sequence generated here and when *inc_val
	 is going to be actually used, emit it at some suitable place.  */
      last = get_last_insn ();
      inc = convert_modes (GET_MODE (dest_reg), GET_MODE (x), arg, 0);
      if (get_last_insn () != last)
	{
	  delete_insns_since (last);
	  return 0;
	}

      *inc_val = inc;
      *mult_val = const1_rtx;
      *location = argp;
      return 1;

    case SUBREG:
      /* If what's inside the SUBREG is a BIV, then the SUBREG.  This will
	 handle addition of promoted variables.
	 ??? The comment at the start of this function is wrong: promoted
	 variable increments don't look like it says they do.  */
      return basic_induction_var (loop, SUBREG_REG (x),
				  GET_MODE (SUBREG_REG (x)),
				  dest_reg, p, inc_val, mult_val, location);

    case REG:
      /* If this register is assigned in a previous insn, look at its
	 source, but don't go outside the loop or past a label.  */

      /* If this sets a register to itself, we would repeat any previous
	 biv increment if we applied this strategy blindly.  */
      if (rtx_equal_p (dest_reg, x))
	return 0;

      insn = p;
      while (1)
	{
	  rtx dest;
	  do
	    {
	      insn = PREV_INSN (insn);
	    }
	  while (insn && NOTE_P (insn)
		 && NOTE_LINE_NUMBER (insn) != NOTE_INSN_LOOP_BEG);

	  if (!insn)
	    break;
	  set = single_set (insn);
	  if (set == 0)
	    break;
	  dest = SET_DEST (set);
	  if (dest == x
	      || (GET_CODE (dest) == SUBREG
		  && (GET_MODE_SIZE (GET_MODE (dest)) <= UNITS_PER_WORD)
		  && (GET_MODE_CLASS (GET_MODE (dest)) == MODE_INT)
		  && SUBREG_REG (dest) == x))
	    return basic_induction_var (loop, SET_SRC (set),
					(GET_MODE (SET_SRC (set)) == VOIDmode
					 ? GET_MODE (x)
					 : GET_MODE (SET_SRC (set))),
					dest_reg, insn,
					inc_val, mult_val, location);

	  while (GET_CODE (dest) == SUBREG
		 || GET_CODE (dest) == ZERO_EXTRACT
		 || GET_CODE (dest) == STRICT_LOW_PART)
	    dest = XEXP (dest, 0);
	  if (dest == x)
	    break;
	}
      /* Fall through.  */

      /* Can accept constant setting of biv only when inside inner most loop.
	 Otherwise, a biv of an inner loop may be incorrectly recognized
	 as a biv of the outer loop,
	 causing code to be moved INTO the inner loop.  */
    case MEM:
      if (loop_invariant_p (loop, x) != 1)
	return 0;
    case CONST_INT:
    case SYMBOL_REF:
    case CONST:
      /* convert_modes aborts if we try to convert to or from CCmode, so just
         exclude that case.  It is very unlikely that a condition code value
	 would be a useful iterator anyways.  convert_modes aborts if we try to
	 convert a float mode to non-float or vice versa too.  */
      if (loop->level == 1
	  && GET_MODE_CLASS (mode) == GET_MODE_CLASS (GET_MODE (dest_reg))
	  && GET_MODE_CLASS (mode) != MODE_CC)
	{
	  /* Possible bug here?  Perhaps we don't know the mode of X.  */
	  last = get_last_insn ();
	  inc = convert_modes (GET_MODE (dest_reg), mode, x, 0);
	  if (get_last_insn () != last)
	    {
	      delete_insns_since (last);
	      return 0;
	    }

	  *inc_val = inc;
	  *mult_val = const0_rtx;
	  return 1;
	}
      else
	return 0;

    case SIGN_EXTEND:
      /* Ignore this BIV if signed arithmetic overflow is defined.  */
      if (flag_wrapv)
	return 0;
      return basic_induction_var (loop, XEXP (x, 0), GET_MODE (XEXP (x, 0)),
				  dest_reg, p, inc_val, mult_val, location);

    case ASHIFTRT:
      /* Similar, since this can be a sign extension.  */
      for (insn = PREV_INSN (p);
	   (insn && NOTE_P (insn)
	    && NOTE_LINE_NUMBER (insn) != NOTE_INSN_LOOP_BEG);
	   insn = PREV_INSN (insn))
	;

      if (insn)
	set = single_set (insn);

      if (! rtx_equal_p (dest_reg, XEXP (x, 0))
	  && set && SET_DEST (set) == XEXP (x, 0)
	  && GET_CODE (XEXP (x, 1)) == CONST_INT
	  && INTVAL (XEXP (x, 1)) >= 0
	  && GET_CODE (SET_SRC (set)) == ASHIFT
	  && XEXP (x, 1) == XEXP (SET_SRC (set), 1))
	return basic_induction_var (loop, XEXP (SET_SRC (set), 0),
				    GET_MODE (XEXP (x, 0)),
				    dest_reg, insn, inc_val, mult_val,
				    location);
      return 0;

    default:
      return 0;
    }
}

/* A general induction variable (giv) is any quantity that is a linear
   function   of a basic induction variable,
   i.e. giv = biv * mult_val + add_val.
   The coefficients can be any loop invariant quantity.
   A giv need not be computed directly from the biv;
   it can be computed by way of other givs.  */

/* Determine whether X computes a giv.
   If it does, return a nonzero value
     which is the benefit from eliminating the computation of X;
   set *SRC_REG to the register of the biv that it is computed from;
   set *ADD_VAL and *MULT_VAL to the coefficients,
     such that the value of X is biv * mult + add;  */

static int
general_induction_var (const struct loop *loop, rtx x, rtx *src_reg,
		       rtx *add_val, rtx *mult_val, rtx *ext_val,
		       int is_addr, int *pbenefit,
		       enum machine_mode addr_mode)
{
  struct loop_ivs *ivs = LOOP_IVS (loop);
  rtx orig_x = x;

  /* If this is an invariant, forget it, it isn't a giv.  */
  if (loop_invariant_p (loop, x) == 1)
    return 0;

  *pbenefit = 0;
  *ext_val = NULL_RTX;
  x = simplify_giv_expr (loop, x, ext_val, pbenefit);
  if (x == 0)
    return 0;

  switch (GET_CODE (x))
    {
    case USE:
    case CONST_INT:
      /* Since this is now an invariant and wasn't before, it must be a giv
	 with MULT_VAL == 0.  It doesn't matter which BIV we associate this
	 with.  */
      *src_reg = ivs->list->biv->dest_reg;
      *mult_val = const0_rtx;
      *add_val = x;
      break;

    case REG:
      /* This is equivalent to a BIV.  */
      *src_reg = x;
      *mult_val = const1_rtx;
      *add_val = const0_rtx;
      break;

    case PLUS:
      /* Either (plus (biv) (invar)) or
	 (plus (mult (biv) (invar_1)) (invar_2)).  */
      if (GET_CODE (XEXP (x, 0)) == MULT)
	{
	  *src_reg = XEXP (XEXP (x, 0), 0);
	  *mult_val = XEXP (XEXP (x, 0), 1);
	}
      else
	{
	  *src_reg = XEXP (x, 0);
	  *mult_val = const1_rtx;
	}
      *add_val = XEXP (x, 1);
      break;

    case MULT:
      /* ADD_VAL is zero.  */
      *src_reg = XEXP (x, 0);
      *mult_val = XEXP (x, 1);
      *add_val = const0_rtx;
      break;

    default:
      abort ();
    }

  /* Remove any enclosing USE from ADD_VAL and MULT_VAL (there will be
     unless they are CONST_INT).  */
  if (GET_CODE (*add_val) == USE)
    *add_val = XEXP (*add_val, 0);
  if (GET_CODE (*mult_val) == USE)
    *mult_val = XEXP (*mult_val, 0);

  if (is_addr)
    *pbenefit += address_cost (orig_x, addr_mode) - reg_address_cost;
  else
    *pbenefit += rtx_cost (orig_x, SET);

  /* Always return true if this is a giv so it will be detected as such,
     even if the benefit is zero or negative.  This allows elimination
     of bivs that might otherwise not be eliminated.  */
  return 1;
}

/* Given an expression, X, try to form it as a linear function of a biv.
   We will canonicalize it to be of the form
	(plus (mult (BIV) (invar_1))
	      (invar_2))
   with possible degeneracies.

   The invariant expressions must each be of a form that can be used as a
   machine operand.  We surround then with a USE rtx (a hack, but localized
   and certainly unambiguous!) if not a CONST_INT for simplicity in this
   routine; it is the caller's responsibility to strip them.

   If no such canonicalization is possible (i.e., two biv's are used or an
   expression that is neither invariant nor a biv or giv), this routine
   returns 0.

   For a nonzero return, the result will have a code of CONST_INT, USE,
   REG (for a BIV), PLUS, or MULT.  No other codes will occur.

   *BENEFIT will be incremented by the benefit of any sub-giv encountered.  */

static rtx sge_plus (enum machine_mode, rtx, rtx);
static rtx sge_plus_constant (rtx, rtx);

static rtx
simplify_giv_expr (const struct loop *loop, rtx x, rtx *ext_val, int *benefit)
{
  struct loop_ivs *ivs = LOOP_IVS (loop);
  struct loop_regs *regs = LOOP_REGS (loop);
  enum machine_mode mode = GET_MODE (x);
  rtx arg0, arg1;
  rtx tem;

  /* If this is not an integer mode, or if we cannot do arithmetic in this
     mode, this can't be a giv.  */
  if (mode != VOIDmode
      && (GET_MODE_CLASS (mode) != MODE_INT
	  || GET_MODE_BITSIZE (mode) > HOST_BITS_PER_WIDE_INT))
    return NULL_RTX;

  switch (GET_CODE (x))
    {
    case PLUS:
      arg0 = simplify_giv_expr (loop, XEXP (x, 0), ext_val, benefit);
      arg1 = simplify_giv_expr (loop, XEXP (x, 1), ext_val, benefit);
      if (arg0 == 0 || arg1 == 0)
	return NULL_RTX;

      /* Put constant last, CONST_INT last if both constant.  */
      if ((GET_CODE (arg0) == USE
	   || GET_CODE (arg0) == CONST_INT)
	  && ! ((GET_CODE (arg0) == USE
		 && GET_CODE (arg1) == USE)
		|| GET_CODE (arg1) == CONST_INT))
	tem = arg0, arg0 = arg1, arg1 = tem;

      /* Handle addition of zero, then addition of an invariant.  */
      if (arg1 == const0_rtx)
	return arg0;
      else if (GET_CODE (arg1) == CONST_INT || GET_CODE (arg1) == USE)
	switch (GET_CODE (arg0))
	  {
	  case CONST_INT:
	  case USE:
	    /* Adding two invariants must result in an invariant, so enclose
	       addition operation inside a USE and return it.  */
	    if (GET_CODE (arg0) == USE)
	      arg0 = XEXP (arg0, 0);
	    if (GET_CODE (arg1) == USE)
	      arg1 = XEXP (arg1, 0);

	    if (GET_CODE (arg0) == CONST_INT)
	      tem = arg0, arg0 = arg1, arg1 = tem;
	    if (GET_CODE (arg1) == CONST_INT)
	      tem = sge_plus_constant (arg0, arg1);
	    else
	      tem = sge_plus (mode, arg0, arg1);

	    if (GET_CODE (tem) != CONST_INT)
	      tem = gen_rtx_USE (mode, tem);
	    return tem;

	  case REG:
	  case MULT:
	    /* biv + invar or mult + invar.  Return sum.  */
	    return gen_rtx_PLUS (mode, arg0, arg1);

	  case PLUS:
	    /* (a + invar_1) + invar_2.  Associate.  */
	    return
	      simplify_giv_expr (loop,
				 gen_rtx_PLUS (mode,
					       XEXP (arg0, 0),
					       gen_rtx_PLUS (mode,
							     XEXP (arg0, 1),
							     arg1)),
				 ext_val, benefit);

	  default:
	    abort ();
	  }

      /* Each argument must be either REG, PLUS, or MULT.  Convert REG to
	 MULT to reduce cases.  */
      if (REG_P (arg0))
	arg0 = gen_rtx_MULT (mode, arg0, const1_rtx);
      if (REG_P (arg1))
	arg1 = gen_rtx_MULT (mode, arg1, const1_rtx);

      /* Now have PLUS + PLUS, PLUS + MULT, MULT + PLUS, or MULT + MULT.
	 Put a MULT first, leaving PLUS + PLUS, MULT + PLUS, or MULT + MULT.
	 Recurse to associate the second PLUS.  */
      if (GET_CODE (arg1) == MULT)
	tem = arg0, arg0 = arg1, arg1 = tem;

      if (GET_CODE (arg1) == PLUS)
	return
	  simplify_giv_expr (loop,
			     gen_rtx_PLUS (mode,
					   gen_rtx_PLUS (mode, arg0,
							 XEXP (arg1, 0)),
					   XEXP (arg1, 1)),
			     ext_val, benefit);

      /* Now must have MULT + MULT.  Distribute if same biv, else not giv.  */
      if (GET_CODE (arg0) != MULT || GET_CODE (arg1) != MULT)
	return NULL_RTX;

      if (!rtx_equal_p (arg0, arg1))
	return NULL_RTX;

      return simplify_giv_expr (loop,
				gen_rtx_MULT (mode,
					      XEXP (arg0, 0),
					      gen_rtx_PLUS (mode,
							    XEXP (arg0, 1),
							    XEXP (arg1, 1))),
				ext_val, benefit);

    case MINUS:
      /* Handle "a - b" as "a + b * (-1)".  */
      return simplify_giv_expr (loop,
				gen_rtx_PLUS (mode,
					      XEXP (x, 0),
					      gen_rtx_MULT (mode,
							    XEXP (x, 1),
							    constm1_rtx)),
				ext_val, benefit);

    case MULT:
      arg0 = simplify_giv_expr (loop, XEXP (x, 0), ext_val, benefit);
      arg1 = simplify_giv_expr (loop, XEXP (x, 1), ext_val, benefit);
      if (arg0 == 0 || arg1 == 0)
	return NULL_RTX;

      /* Put constant last, CONST_INT last if both constant.  */
      if ((GET_CODE (arg0) == USE || GET_CODE (arg0) == CONST_INT)
	  && GET_CODE (arg1) != CONST_INT)
	tem = arg0, arg0 = arg1, arg1 = tem;

      /* If second argument is not now constant, not giv.  */
      if (GET_CODE (arg1) != USE && GET_CODE (arg1) != CONST_INT)
	return NULL_RTX;

      /* Handle multiply by 0 or 1.  */
      if (arg1 == const0_rtx)
	return const0_rtx;

      else if (arg1 == const1_rtx)
	return arg0;

      switch (GET_CODE (arg0))
	{
	case REG:
	  /* biv * invar.  Done.  */
	  return gen_rtx_MULT (mode, arg0, arg1);

	case CONST_INT:
	  /* Product of two constants.  */
	  return GEN_INT (INTVAL (arg0) * INTVAL (arg1));

	case USE:
	  /* invar * invar is a giv, but attempt to simplify it somehow.  */
	  if (GET_CODE (arg1) != CONST_INT)
	    return NULL_RTX;

	  arg0 = XEXP (arg0, 0);
	  if (GET_CODE (arg0) == MULT)
	    {
	      /* (invar_0 * invar_1) * invar_2.  Associate.  */
	      return simplify_giv_expr (loop,
					gen_rtx_MULT (mode,
						      XEXP (arg0, 0),
						      gen_rtx_MULT (mode,
								    XEXP (arg0,
									  1),
								    arg1)),
					ext_val, benefit);
	    }
	  /* Propagate the MULT expressions to the innermost nodes.  */
	  else if (GET_CODE (arg0) == PLUS)
	    {
	      /* (invar_0 + invar_1) * invar_2.  Distribute.  */
	      return simplify_giv_expr (loop,
					gen_rtx_PLUS (mode,
						      gen_rtx_MULT (mode,
								    XEXP (arg0,
									  0),
								    arg1),
						      gen_rtx_MULT (mode,
								    XEXP (arg0,
									  1),
								    arg1)),
					ext_val, benefit);
	    }
	  return gen_rtx_USE (mode, gen_rtx_MULT (mode, arg0, arg1));

	case MULT:
	  /* (a * invar_1) * invar_2.  Associate.  */
	  return simplify_giv_expr (loop,
				    gen_rtx_MULT (mode,
						  XEXP (arg0, 0),
						  gen_rtx_MULT (mode,
								XEXP (arg0, 1),
								arg1)),
				    ext_val, benefit);

	case PLUS:
	  /* (a + invar_1) * invar_2.  Distribute.  */
	  return simplify_giv_expr (loop,
				    gen_rtx_PLUS (mode,
						  gen_rtx_MULT (mode,
								XEXP (arg0, 0),
								arg1),
						  gen_rtx_MULT (mode,
								XEXP (arg0, 1),
								arg1)),
				    ext_val, benefit);

	default:
	  abort ();
	}

    case ASHIFT:
      /* Shift by constant is multiply by power of two.  */
      if (GET_CODE (XEXP (x, 1)) != CONST_INT)
	return 0;

      return
	simplify_giv_expr (loop,
			   gen_rtx_MULT (mode,
					 XEXP (x, 0),
					 GEN_INT ((HOST_WIDE_INT) 1
						  << INTVAL (XEXP (x, 1)))),
			   ext_val, benefit);

    case NEG:
      /* "-a" is "a * (-1)" */
      return simplify_giv_expr (loop,
				gen_rtx_MULT (mode, XEXP (x, 0), constm1_rtx),
				ext_val, benefit);

    case NOT:
      /* "~a" is "-a - 1". Silly, but easy.  */
      return simplify_giv_expr (loop,
				gen_rtx_MINUS (mode,
					       gen_rtx_NEG (mode, XEXP (x, 0)),
					       const1_rtx),
				ext_val, benefit);

    case USE:
      /* Already in proper form for invariant.  */
      return x;

    case SIGN_EXTEND:
    case ZERO_EXTEND:
    case TRUNCATE:
      /* Conditionally recognize extensions of simple IVs.  After we've
	 computed loop traversal counts and verified the range of the
	 source IV, we'll reevaluate this as a GIV.  */
      if (*ext_val == NULL_RTX)
	{
	  arg0 = simplify_giv_expr (loop, XEXP (x, 0), ext_val, benefit);
	  if (arg0 && *ext_val == NULL_RTX && REG_P (arg0))
	    {
	      *ext_val = gen_rtx_fmt_e (GET_CODE (x), mode, arg0);
	      return arg0;
	    }
	}
      goto do_default;

    case REG:
      /* If this is a new register, we can't deal with it.  */
      if (REGNO (x) >= max_reg_before_loop)
	return 0;

      /* Check for biv or giv.  */
      switch (REG_IV_TYPE (ivs, REGNO (x)))
	{
	case BASIC_INDUCT:
	  return x;
	case GENERAL_INDUCT:
	  {
	    struct induction *v = REG_IV_INFO (ivs, REGNO (x));

	    /* Form expression from giv and add benefit.  Ensure this giv
	       can derive another and subtract any needed adjustment if so.  */

	    /* Increasing the benefit here is risky.  The only case in which it
	       is arguably correct is if this is the only use of V.  In other
	       cases, this will artificially inflate the benefit of the current
	       giv, and lead to suboptimal code.  Thus, it is disabled, since
	       potentially not reducing an only marginally beneficial giv is
	       less harmful than reducing many givs that are not really
	       beneficial.  */
	    {
	      rtx single_use = regs->array[REGNO (x)].single_usage;
	      if (single_use && single_use != const0_rtx)
		*benefit += v->benefit;
	    }

	    if (v->cant_derive)
	      return 0;

	    tem = gen_rtx_PLUS (mode, gen_rtx_MULT (mode,
						    v->src_reg, v->mult_val),
				v->add_val);

	    if (v->derive_adjustment)
	      tem = gen_rtx_MINUS (mode, tem, v->derive_adjustment);
	    arg0 = simplify_giv_expr (loop, tem, ext_val, benefit);
	    if (*ext_val)
	      {
		if (!v->ext_dependent)
		  return arg0;
	      }
	    else
	      {
		*ext_val = v->ext_dependent;
		return arg0;
	      }
	    return 0;
	  }

	default:
	do_default:
	  /* If it isn't an induction variable, and it is invariant, we
	     may be able to simplify things further by looking through
	     the bits we just moved outside the loop.  */
	  if (loop_invariant_p (loop, x) == 1)
	    {
	      struct movable *m;
	      struct loop_movables *movables = LOOP_MOVABLES (loop);

	      for (m = movables->head; m; m = m->next)
		if (rtx_equal_p (x, m->set_dest))
		  {
		    /* Ok, we found a match.  Substitute and simplify.  */

		    /* If we match another movable, we must use that, as
		       this one is going away.  */
		    if (m->match)
		      return simplify_giv_expr (loop, m->match->set_dest,
						ext_val, benefit);

		    /* If consec is nonzero, this is a member of a group of
		       instructions that were moved together.  We handle this
		       case only to the point of seeking to the last insn and
		       looking for a REG_EQUAL.  Fail if we don't find one.  */
		    if (m->consec != 0)
		      {
			int i = m->consec;
			tem = m->insn;
			do
			  {
			    tem = NEXT_INSN (tem);
			  }
			while (--i > 0);

			tem = find_reg_note (tem, REG_EQUAL, NULL_RTX);
			if (tem)
			  tem = XEXP (tem, 0);
		      }
		    else
		      {
			tem = single_set (m->insn);
			if (tem)
			  tem = SET_SRC (tem);
		      }

		    if (tem)
		      {
			/* What we are most interested in is pointer
			   arithmetic on invariants -- only take
			   patterns we may be able to do something with.  */
			if (GET_CODE (tem) == PLUS
			    || GET_CODE (tem) == MULT
			    || GET_CODE (tem) == ASHIFT
			    || GET_CODE (tem) == CONST_INT
			    || GET_CODE (tem) == SYMBOL_REF)
			  {
			    tem = simplify_giv_expr (loop, tem, ext_val,
						     benefit);
			    if (tem)
			      return tem;
			  }
			else if (GET_CODE (tem) == CONST
				 && GET_CODE (XEXP (tem, 0)) == PLUS
				 && GET_CODE (XEXP (XEXP (tem, 0), 0)) == SYMBOL_REF
				 && GET_CODE (XEXP (XEXP (tem, 0), 1)) == CONST_INT)
			  {
			    tem = simplify_giv_expr (loop, XEXP (tem, 0),
						     ext_val, benefit);
			    if (tem)
			      return tem;
			  }
		      }
		    break;
		  }
	    }
	  break;
	}

      /* Fall through to general case.  */
    default:
      /* If invariant, return as USE (unless CONST_INT).
	 Otherwise, not giv.  */
      if (GET_CODE (x) == USE)
	x = XEXP (x, 0);

      if (loop_invariant_p (loop, x) == 1)
	{
	  if (GET_CODE (x) == CONST_INT)
	    return x;
	  if (GET_CODE (x) == CONST
	      && GET_CODE (XEXP (x, 0)) == PLUS
	      && GET_CODE (XEXP (XEXP (x, 0), 0)) == SYMBOL_REF
	      && GET_CODE (XEXP (XEXP (x, 0), 1)) == CONST_INT)
	    x = XEXP (x, 0);
	  return gen_rtx_USE (mode, x);
	}
      else
	return 0;
    }
}

/* This routine folds invariants such that there is only ever one
   CONST_INT in the summation.  It is only used by simplify_giv_expr.  */

static rtx
sge_plus_constant (rtx x, rtx c)
{
  if (GET_CODE (x) == CONST_INT)
    return GEN_INT (INTVAL (x) + INTVAL (c));
  else if (GET_CODE (x) != PLUS)
    return gen_rtx_PLUS (GET_MODE (x), x, c);
  else if (GET_CODE (XEXP (x, 1)) == CONST_INT)
    {
      return gen_rtx_PLUS (GET_MODE (x), XEXP (x, 0),
			   GEN_INT (INTVAL (XEXP (x, 1)) + INTVAL (c)));
    }
  else if (GET_CODE (XEXP (x, 0)) == PLUS
	   || GET_CODE (XEXP (x, 1)) != PLUS)
    {
      return gen_rtx_PLUS (GET_MODE (x),
			   sge_plus_constant (XEXP (x, 0), c), XEXP (x, 1));
    }
  else
    {
      return gen_rtx_PLUS (GET_MODE (x),
			   sge_plus_constant (XEXP (x, 1), c), XEXP (x, 0));
    }
}

static rtx
sge_plus (enum machine_mode mode, rtx x, rtx y)
{
  while (GET_CODE (y) == PLUS)
    {
      rtx a = XEXP (y, 0);
      if (GET_CODE (a) == CONST_INT)
	x = sge_plus_constant (x, a);
      else
	x = gen_rtx_PLUS (mode, x, a);
      y = XEXP (y, 1);
    }
  if (GET_CODE (y) == CONST_INT)
    x = sge_plus_constant (x, y);
  else
    x = gen_rtx_PLUS (mode, x, y);
  return x;
}

/* Help detect a giv that is calculated by several consecutive insns;
   for example,
      giv = biv * M
      giv = giv + A
   The caller has already identified the first insn P as having a giv as dest;
   we check that all other insns that set the same register follow
   immediately after P, that they alter nothing else,
   and that the result of the last is still a giv.

   The value is 0 if the reg set in P is not really a giv.
   Otherwise, the value is the amount gained by eliminating
   all the consecutive insns that compute the value.

   FIRST_BENEFIT is the amount gained by eliminating the first insn, P.
   SRC_REG is the reg of the biv; DEST_REG is the reg of the giv.

   The coefficients of the ultimate giv value are stored in
   *MULT_VAL and *ADD_VAL.  */

static int
consec_sets_giv (const struct loop *loop, int first_benefit, rtx p,
		 rtx src_reg, rtx dest_reg, rtx *add_val, rtx *mult_val,
		 rtx *ext_val, rtx *last_consec_insn)
{
  struct loop_ivs *ivs = LOOP_IVS (loop);
  struct loop_regs *regs = LOOP_REGS (loop);
  int count;
  enum rtx_code code;
  int benefit;
  rtx temp;
  rtx set;

  /* Indicate that this is a giv so that we can update the value produced in
     each insn of the multi-insn sequence.

     This induction structure will be used only by the call to
     general_induction_var below, so we can allocate it on our stack.
     If this is a giv, our caller will replace the induct var entry with
     a new induction structure.  */
  struct induction *v;

  if (REG_IV_TYPE (ivs, REGNO (dest_reg)) != UNKNOWN_INDUCT)
    return 0;

  v = alloca (sizeof (struct induction));
  v->src_reg = src_reg;
  v->mult_val = *mult_val;
  v->add_val = *add_val;
  v->benefit = first_benefit;
  v->cant_derive = 0;
  v->derive_adjustment = 0;
  v->ext_dependent = NULL_RTX;

  REG_IV_TYPE (ivs, REGNO (dest_reg)) = GENERAL_INDUCT;
  REG_IV_INFO (ivs, REGNO (dest_reg)) = v;

  count = regs->array[REGNO (dest_reg)].n_times_set - 1;

  while (count > 0)
    {
      p = NEXT_INSN (p);
      code = GET_CODE (p);

      /* If libcall, skip to end of call sequence.  */
      if (code == INSN && (temp = find_reg_note (p, REG_LIBCALL, NULL_RTX)))
	p = XEXP (temp, 0);

      if (code == INSN
	  && (set = single_set (p))
	  && REG_P (SET_DEST (set))
	  && SET_DEST (set) == dest_reg
	  && (general_induction_var (loop, SET_SRC (set), &src_reg,
				     add_val, mult_val, ext_val, 0,
				     &benefit, VOIDmode)
	      /* Giv created by equivalent expression.  */
	      || ((temp = find_reg_note (p, REG_EQUAL, NULL_RTX))
		  && general_induction_var (loop, XEXP (temp, 0), &src_reg,
					    add_val, mult_val, ext_val, 0,
					    &benefit, VOIDmode)))
	  && src_reg == v->src_reg)
	{
	  if (find_reg_note (p, REG_RETVAL, NULL_RTX))
	    benefit += libcall_benefit (p);

	  count--;
	  v->mult_val = *mult_val;
	  v->add_val = *add_val;
	  v->benefit += benefit;
	}
      else if (code != NOTE)
	{
	  /* Allow insns that set something other than this giv to a
	     constant.  Such insns are needed on machines which cannot
	     include long constants and should not disqualify a giv.  */
	  if (code == INSN
	      && (set = single_set (p))
	      && SET_DEST (set) != dest_reg
	      && CONSTANT_P (SET_SRC (set)))
	    continue;

	  REG_IV_TYPE (ivs, REGNO (dest_reg)) = UNKNOWN_INDUCT;
	  return 0;
	}
    }

  REG_IV_TYPE (ivs, REGNO (dest_reg)) = UNKNOWN_INDUCT;
  *last_consec_insn = p;
  return v->benefit;
}

/* Return an rtx, if any, that expresses giv G2 as a function of the register
   represented by G1.  If no such expression can be found, or it is clear that
   it cannot possibly be a valid address, 0 is returned.

   To perform the computation, we note that
	G1 = x * v + a		and
	G2 = y * v + b
   where `v' is the biv.

   So G2 = (y/b) * G1 + (b - a*y/x).

   Note that MULT = y/x.

   Update: A and B are now allowed to be additive expressions such that
   B contains all variables in A.  That is, computing B-A will not require
   subtracting variables.  */

static rtx
express_from_1 (rtx a, rtx b, rtx mult)
{
  /* If MULT is zero, then A*MULT is zero, and our expression is B.  */

  if (mult == const0_rtx)
    return b;

  /* If MULT is not 1, we cannot handle A with non-constants, since we
     would then be required to subtract multiples of the registers in A.
     This is theoretically possible, and may even apply to some Fortran
     constructs, but it is a lot of work and we do not attempt it here.  */

  if (mult != const1_rtx && GET_CODE (a) != CONST_INT)
    return NULL_RTX;

  /* In general these structures are sorted top to bottom (down the PLUS
     chain), but not left to right across the PLUS.  If B is a higher
     order giv than A, we can strip one level and recurse.  If A is higher
     order, we'll eventually bail out, but won't know that until the end.
     If they are the same, we'll strip one level around this loop.  */

  while (GET_CODE (a) == PLUS && GET_CODE (b) == PLUS)
    {
      rtx ra, rb, oa, ob, tmp;

      ra = XEXP (a, 0), oa = XEXP (a, 1);
      if (GET_CODE (ra) == PLUS)
	tmp = ra, ra = oa, oa = tmp;

      rb = XEXP (b, 0), ob = XEXP (b, 1);
      if (GET_CODE (rb) == PLUS)
	tmp = rb, rb = ob, ob = tmp;

      if (rtx_equal_p (ra, rb))
	/* We matched: remove one reg completely.  */
	a = oa, b = ob;
      else if (GET_CODE (ob) != PLUS && rtx_equal_p (ra, ob))
	/* An alternate match.  */
	a = oa, b = rb;
      else if (GET_CODE (oa) != PLUS && rtx_equal_p (oa, rb))
	/* An alternate match.  */
	a = ra, b = ob;
      else
	{
	  /* Indicates an extra register in B.  Strip one level from B and
	     recurse, hoping B was the higher order expression.  */
	  ob = express_from_1 (a, ob, mult);
	  if (ob == NULL_RTX)
	    return NULL_RTX;
	  return gen_rtx_PLUS (GET_MODE (b), rb, ob);
	}
    }

  /* Here we are at the last level of A, go through the cases hoping to
     get rid of everything but a constant.  */

  if (GET_CODE (a) == PLUS)
    {
      rtx ra, oa;

      ra = XEXP (a, 0), oa = XEXP (a, 1);
      if (rtx_equal_p (oa, b))
	oa = ra;
      else if (!rtx_equal_p (ra, b))
	return NULL_RTX;

      if (GET_CODE (oa) != CONST_INT)
	return NULL_RTX;

      return GEN_INT (-INTVAL (oa) * INTVAL (mult));
    }
  else if (GET_CODE (a) == CONST_INT)
    {
      return plus_constant (b, -INTVAL (a) * INTVAL (mult));
    }
  else if (CONSTANT_P (a))
    {
      enum machine_mode mode_a = GET_MODE (a);
      enum machine_mode mode_b = GET_MODE (b);
      enum machine_mode mode = mode_b == VOIDmode ? mode_a : mode_b;
      return simplify_gen_binary (MINUS, mode, b, a);
    }
  else if (GET_CODE (b) == PLUS)
    {
      if (rtx_equal_p (a, XEXP (b, 0)))
	return XEXP (b, 1);
      else if (rtx_equal_p (a, XEXP (b, 1)))
	return XEXP (b, 0);
      else
	return NULL_RTX;
    }
  else if (rtx_equal_p (a, b))
    return const0_rtx;

  return NULL_RTX;
}

static rtx
express_from (struct induction *g1, struct induction *g2)
{
  rtx mult, add;

  /* The value that G1 will be multiplied by must be a constant integer.  Also,
     the only chance we have of getting a valid address is if b*c/a (see above
     for notation) is also an integer.  */
  if (GET_CODE (g1->mult_val) == CONST_INT
      && GET_CODE (g2->mult_val) == CONST_INT)
    {
      if (g1->mult_val == const0_rtx
	  || (g1->mult_val == constm1_rtx
	      && INTVAL (g2->mult_val)
		 == (HOST_WIDE_INT) 1 << (HOST_BITS_PER_WIDE_INT - 1))
	  || INTVAL (g2->mult_val) % INTVAL (g1->mult_val) != 0)
	return NULL_RTX;
      mult = GEN_INT (INTVAL (g2->mult_val) / INTVAL (g1->mult_val));
    }
  else if (rtx_equal_p (g1->mult_val, g2->mult_val))
    mult = const1_rtx;
  else
    {
      /* ??? Find out if the one is a multiple of the other?  */
      return NULL_RTX;
    }

  add = express_from_1 (g1->add_val, g2->add_val, mult);
  if (add == NULL_RTX)
    {
      /* Failed.  If we've got a multiplication factor between G1 and G2,
	 scale G1's addend and try again.  */
      if (INTVAL (mult) > 1)
	{
	  rtx g1_add_val = g1->add_val;
	  if (GET_CODE (g1_add_val) == MULT
	      && GET_CODE (XEXP (g1_add_val, 1)) == CONST_INT)
	    {
	      HOST_WIDE_INT m;
	      m = INTVAL (mult) * INTVAL (XEXP (g1_add_val, 1));
	      g1_add_val = gen_rtx_MULT (GET_MODE (g1_add_val),
					 XEXP (g1_add_val, 0), GEN_INT (m));
	    }
	  else
	    {
	      g1_add_val = gen_rtx_MULT (GET_MODE (g1_add_val), g1_add_val,
					 mult);
	    }

	  add = express_from_1 (g1_add_val, g2->add_val, const1_rtx);
	}
    }
  if (add == NULL_RTX)
    return NULL_RTX;

  /* Form simplified final result.  */
  if (mult == const0_rtx)
    return add;
  else if (mult == const1_rtx)
    mult = g1->dest_reg;
  else
    mult = gen_rtx_MULT (g2->mode, g1->dest_reg, mult);

  if (add == const0_rtx)
    return mult;
  else
    {
      if (GET_CODE (add) == PLUS
	  && CONSTANT_P (XEXP (add, 1)))
	{
	  rtx tem = XEXP (add, 1);
	  mult = gen_rtx_PLUS (g2->mode, mult, XEXP (add, 0));
	  add = tem;
	}

      return gen_rtx_PLUS (g2->mode, mult, add);
    }
}

/* Return an rtx, if any, that expresses giv G2 as a function of the register
   represented by G1.  This indicates that G2 should be combined with G1 and
   that G2 can use (either directly or via an address expression) a register
   used to represent G1.  */

static rtx
combine_givs_p (struct induction *g1, struct induction *g2)
{
  rtx comb, ret;

  /* With the introduction of ext dependent givs, we must care for modes.
     G2 must not use a wider mode than G1.  */
  if (GET_MODE_SIZE (g1->mode) < GET_MODE_SIZE (g2->mode))
    return NULL_RTX;

  ret = comb = express_from (g1, g2);
  if (comb == NULL_RTX)
    return NULL_RTX;
  if (g1->mode != g2->mode)
    ret = gen_lowpart (g2->mode, comb);

  /* If these givs are identical, they can be combined.  We use the results
     of express_from because the addends are not in a canonical form, so
     rtx_equal_p is a weaker test.  */
  /* But don't combine a DEST_REG giv with a DEST_ADDR giv; we want the
     combination to be the other way round.  */
  if (comb == g1->dest_reg
      && (g1->giv_type == DEST_REG || g2->giv_type == DEST_ADDR))
    {
      return ret;
    }

  /* If G2 can be expressed as a function of G1 and that function is valid
     as an address and no more expensive than using a register for G2,
     the expression of G2 in terms of G1 can be used.  */
  if (ret != NULL_RTX
      && g2->giv_type == DEST_ADDR
      && memory_address_p (GET_MODE (g2->mem), ret))
    return ret;

  return NULL_RTX;
}

/* See if BL is monotonic and has a constant per-iteration increment.
   Return the increment if so, otherwise return 0.  */

static HOST_WIDE_INT
get_monotonic_increment (struct iv_class *bl)
{
  struct induction *v;
  rtx incr;

  /* Get the total increment and check that it is constant.  */
  incr = biv_total_increment (bl);
  if (incr == 0 || GET_CODE (incr) != CONST_INT)
    return 0;

  for (v = bl->biv; v != 0; v = v->next_iv)
    {
      if (GET_CODE (v->add_val) != CONST_INT)
	return 0;

      if (INTVAL (v->add_val) < 0 && INTVAL (incr) >= 0)
	return 0;

      if (INTVAL (v->add_val) > 0 && INTVAL (incr) <= 0)
	return 0;
    }
  return INTVAL (incr);
}


/* Subroutine of biv_fits_mode_p.  Return true if biv BL, when biased by
   BIAS, will never exceed the unsigned range of MODE.  LOOP is the loop
   to which the biv belongs and INCR is its per-iteration increment.  */

static bool
biased_biv_fits_mode_p (const struct loop *loop, struct iv_class *bl,
			HOST_WIDE_INT incr, enum machine_mode mode,
			unsigned HOST_WIDE_INT bias)
{
  unsigned HOST_WIDE_INT initial, maximum, span, delta;

  /* We need to be able to manipulate MODE-size constants.  */
  if (HOST_BITS_PER_WIDE_INT < GET_MODE_BITSIZE (mode))
    return false;

  /* The number of loop iterations must be constant.  */
  if (LOOP_INFO (loop)->n_iterations == 0)
    return false;

  /* So must the biv's initial value.  */
  if (bl->initial_value == 0 || GET_CODE (bl->initial_value) != CONST_INT)
    return false;

  initial = bias + INTVAL (bl->initial_value);
  maximum = GET_MODE_MASK (mode);

  /* Make sure that the initial value is within range.  */
  if (initial > maximum)
    return false;

  /* Set up DELTA and SPAN such that the number of iterations * DELTA
     (calculated to arbitrary precision) must be <= SPAN.  */
  if (incr < 0)
    {
      delta = -incr;
      span = initial;
    }
  else
    {
      delta = incr;
      /* Handle the special case in which MAXIMUM is the largest
	 unsigned HOST_WIDE_INT and INITIAL is 0.  */
      if (maximum + 1 == initial)
	span = LOOP_INFO (loop)->n_iterations * delta;
      else
	span = maximum + 1 - initial;
    }
  return (span / LOOP_INFO (loop)->n_iterations >= delta);
}


/* Return true if biv BL will never exceed the bounds of MODE.  LOOP is
   the loop to which BL belongs and INCR is its per-iteration increment.
   UNSIGNEDP is true if the biv should be treated as unsigned.  */

static bool
biv_fits_mode_p (const struct loop *loop, struct iv_class *bl,
		 HOST_WIDE_INT incr, enum machine_mode mode, bool unsignedp)
{
  struct loop_info *loop_info;
  unsigned HOST_WIDE_INT bias;

  /* A biv's value will always be limited to its natural mode.
     Larger modes will observe the same wrap-around.  */
  if (GET_MODE_SIZE (mode) > GET_MODE_SIZE (GET_MODE (bl->biv->src_reg)))
    mode = GET_MODE (bl->biv->src_reg);

  loop_info = LOOP_INFO (loop);

  bias = (unsignedp ? 0 : (GET_MODE_MASK (mode) >> 1) + 1);
  if (biased_biv_fits_mode_p (loop, bl, incr, mode, bias))
    return true;

  if (mode == GET_MODE (bl->biv->src_reg)
      && bl->biv->src_reg == loop_info->iteration_var
      && loop_info->comparison_value
      && loop_invariant_p (loop, loop_info->comparison_value))
    {
      /* If the increment is +1, and the exit test is a <, the BIV
         cannot overflow.  (For <=, we have the problematic case that
         the comparison value might be the maximum value of the range.)  */
      if (incr == 1)
	{
	  if (loop_info->comparison_code == LT)
	    return true;
	  if (loop_info->comparison_code == LTU && unsignedp)
	    return true;
	}

      /* Likewise for increment -1 and exit test >.  */
      if (incr == -1)
	{
	  if (loop_info->comparison_code == GT)
	    return true;
	  if (loop_info->comparison_code == GTU && unsignedp)
	    return true;
	}
    }
  return false;
}


/* Given that X is an extension or truncation of BL, return true
   if it is unaffected by overflow.  LOOP is the loop to which
   BL belongs and INCR is its per-iteration increment.  */

static bool
extension_within_bounds_p (const struct loop *loop, struct iv_class *bl,
			   HOST_WIDE_INT incr, rtx x)
{
  enum machine_mode mode;
  bool signedp, unsignedp;

  switch (GET_CODE (x))
    {
    case SIGN_EXTEND:
    case ZERO_EXTEND:
      mode = GET_MODE (XEXP (x, 0));
      signedp = (GET_CODE (x) == SIGN_EXTEND);
      unsignedp = (GET_CODE (x) == ZERO_EXTEND);
      break;

    case TRUNCATE:
      /* We don't know whether this value is being used as signed
	 or unsigned, so check the conditions for both.  */
      mode = GET_MODE (x);
      signedp = unsignedp = true;
      break;

    default:
      abort ();
    }

  return ((!signedp || biv_fits_mode_p (loop, bl, incr, mode, false))
	  && (!unsignedp || biv_fits_mode_p (loop, bl, incr, mode, true)));
}


/* Check each extension dependent giv in this class to see if its
   root biv is safe from wrapping in the interior mode, which would
   make the giv illegal.  */

static void
check_ext_dependent_givs (const struct loop *loop, struct iv_class *bl)
{
  struct induction *v;
  HOST_WIDE_INT incr;

  incr = get_monotonic_increment (bl);

  /* Invalidate givs that fail the tests.  */
  for (v = bl->giv; v; v = v->next_iv)
    if (v->ext_dependent)
      {
	if (incr != 0
	    && extension_within_bounds_p (loop, bl, incr, v->ext_dependent))
	  {
	    if (loop_dump_stream)
	      fprintf (loop_dump_stream,
		       "Verified ext dependent giv at %d of reg %d\n",
		       INSN_UID (v->insn), bl->regno);
	  }
	else
	  {
	    if (loop_dump_stream)
	      fprintf (loop_dump_stream,
		       "Failed ext dependent giv at %d\n",
		       INSN_UID (v->insn));

	    v->ignore = 1;
	    bl->all_reduced = 0;
	  }
      }
}

/* Generate a version of VALUE in a mode appropriate for initializing V.  */

static rtx
extend_value_for_giv (struct induction *v, rtx value)
{
  rtx ext_dep = v->ext_dependent;

  if (! ext_dep)
    return value;

  /* Recall that check_ext_dependent_givs verified that the known bounds
     of a biv did not overflow or wrap with respect to the extension for
     the giv.  Therefore, constants need no additional adjustment.  */
  if (CONSTANT_P (value) && GET_MODE (value) == VOIDmode)
    return value;

  /* Otherwise, we must adjust the value to compensate for the
     differing modes of the biv and the giv.  */
  return gen_rtx_fmt_e (GET_CODE (ext_dep), GET_MODE (ext_dep), value);
}

struct combine_givs_stats
{
  int giv_number;
  int total_benefit;
};

static int
cmp_combine_givs_stats (const void *xp, const void *yp)
{
  const struct combine_givs_stats * const x =
    (const struct combine_givs_stats *) xp;
  const struct combine_givs_stats * const y =
    (const struct combine_givs_stats *) yp;
  int d;
  d = y->total_benefit - x->total_benefit;
  /* Stabilize the sort.  */
  if (!d)
    d = x->giv_number - y->giv_number;
  return d;
}

/* Check all pairs of givs for iv_class BL and see if any can be combined with
   any other.  If so, point SAME to the giv combined with and set NEW_REG to
   be an expression (in terms of the other giv's DEST_REG) equivalent to the
   giv.  Also, update BENEFIT and related fields for cost/benefit analysis.  */

static void
combine_givs (struct loop_regs *regs, struct iv_class *bl)
{
  /* Additional benefit to add for being combined multiple times.  */
  const int extra_benefit = 3;

  struct induction *g1, *g2, **giv_array;
  int i, j, k, giv_count;
  struct combine_givs_stats *stats;
  rtx *can_combine;

  /* Count givs, because bl->giv_count is incorrect here.  */
  giv_count = 0;
  for (g1 = bl->giv; g1; g1 = g1->next_iv)
    if (!g1->ignore)
      giv_count++;

  giv_array = alloca (giv_count * sizeof (struct induction *));
  i = 0;
  for (g1 = bl->giv; g1; g1 = g1->next_iv)
    if (!g1->ignore)
      giv_array[i++] = g1;

  stats = xcalloc (giv_count, sizeof (*stats));
  can_combine = xcalloc (giv_count, giv_count * sizeof (rtx));

  for (i = 0; i < giv_count; i++)
    {
      int this_benefit;
      rtx single_use;

      g1 = giv_array[i];
      stats[i].giv_number = i;

      /* If a DEST_REG GIV is used only once, do not allow it to combine
	 with anything, for in doing so we will gain nothing that cannot
	 be had by simply letting the GIV with which we would have combined
	 to be reduced on its own.  The losage shows up in particular with
	 DEST_ADDR targets on hosts with reg+reg addressing, though it can
	 be seen elsewhere as well.  */
      if (g1->giv_type == DEST_REG
	  && (single_use = regs->array[REGNO (g1->dest_reg)].single_usage)
	  && single_use != const0_rtx)
	continue;

      this_benefit = g1->benefit;
      /* Add an additional weight for zero addends.  */
      if (g1->no_const_addval)
	this_benefit += 1;

      for (j = 0; j < giv_count; j++)
	{
	  rtx this_combine;

	  g2 = giv_array[j];
	  if (g1 != g2
	      && (this_combine = combine_givs_p (g1, g2)) != NULL_RTX)
	    {
	      can_combine[i * giv_count + j] = this_combine;
	      this_benefit += g2->benefit + extra_benefit;
	    }
	}
      stats[i].total_benefit = this_benefit;
    }

  /* Iterate, combining until we can't.  */
restart:
  qsort (stats, giv_count, sizeof (*stats), cmp_combine_givs_stats);

  if (loop_dump_stream)
    {
      fprintf (loop_dump_stream, "Sorted combine statistics:\n");
      for (k = 0; k < giv_count; k++)
	{
	  g1 = giv_array[stats[k].giv_number];
	  if (!g1->combined_with && !g1->same)
	    fprintf (loop_dump_stream, " {%d, %d}",
		     INSN_UID (giv_array[stats[k].giv_number]->insn),
		     stats[k].total_benefit);
	}
      putc ('\n', loop_dump_stream);
    }

  for (k = 0; k < giv_count; k++)
    {
      int g1_add_benefit = 0;

      i = stats[k].giv_number;
      g1 = giv_array[i];

      /* If it has already been combined, skip.  */
      if (g1->combined_with || g1->same)
	continue;

      for (j = 0; j < giv_count; j++)
	{
	  g2 = giv_array[j];
	  if (g1 != g2 && can_combine[i * giv_count + j]
	      /* If it has already been combined, skip.  */
	      && ! g2->same && ! g2->combined_with)
	    {
	      int l;

	      g2->new_reg = can_combine[i * giv_count + j];
	      g2->same = g1;
	      /* For destination, we now may replace by mem expression instead
		 of register.  This changes the costs considerably, so add the
		 compensation.  */
	      if (g2->giv_type == DEST_ADDR)
		g2->benefit = (g2->benefit + reg_address_cost
			       - address_cost (g2->new_reg,
			       GET_MODE (g2->mem)));
	      g1->combined_with++;
	      g1->lifetime += g2->lifetime;

	      g1_add_benefit += g2->benefit;

	      /* ??? The new final_[bg]iv_value code does a much better job
		 of finding replaceable giv's, and hence this code may no
		 longer be necessary.  */
	      if (! g2->replaceable && REG_USERVAR_P (g2->dest_reg))
		g1_add_benefit -= copy_cost;

	      /* To help optimize the next set of combinations, remove
		 this giv from the benefits of other potential mates.  */
	      for (l = 0; l < giv_count; ++l)
		{
		  int m = stats[l].giv_number;
		  if (can_combine[m * giv_count + j])
		    stats[l].total_benefit -= g2->benefit + extra_benefit;
		}

	      if (loop_dump_stream)
		fprintf (loop_dump_stream,
			 "giv at %d combined with giv at %d; new benefit %d + %d, lifetime %d\n",
			 INSN_UID (g2->insn), INSN_UID (g1->insn),
			 g1->benefit, g1_add_benefit, g1->lifetime);
	    }
	}

      /* To help optimize the next set of combinations, remove
	 this giv from the benefits of other potential mates.  */
      if (g1->combined_with)
	{
	  for (j = 0; j < giv_count; ++j)
	    {
	      int m = stats[j].giv_number;
	      if (can_combine[m * giv_count + i])
		stats[j].total_benefit -= g1->benefit + extra_benefit;
	    }

	  g1->benefit += g1_add_benefit;

	  /* We've finished with this giv, and everything it touched.
	     Restart the combination so that proper weights for the
	     rest of the givs are properly taken into account.  */
	  /* ??? Ideally we would compact the arrays at this point, so
	     as to not cover old ground.  But sanely compacting
	     can_combine is tricky.  */
	  goto restart;
	}
    }

  /* Clean up.  */
  free (stats);
  free (can_combine);
}

/* Generate sequence for REG = B * M + A.  B is the initial value of
   the basic induction variable, M a multiplicative constant, A an
   additive constant and REG the destination register.  */

static rtx
gen_add_mult (rtx b,  rtx m, rtx a, rtx reg)
{
  rtx seq;
  rtx result;

  start_sequence ();
  /* Use unsigned arithmetic.  */
  result = expand_mult_add (b, reg, m, a, GET_MODE (reg), 1);
  if (reg != result)
    emit_move_insn (reg, result);
  seq = get_insns ();
  end_sequence ();

  return seq;
}


/* Update registers created in insn sequence SEQ.  */

static void
loop_regs_update (const struct loop *loop ATTRIBUTE_UNUSED, rtx seq)
{
  rtx insn;

  /* Update register info for alias analysis.  */

  insn = seq;
  while (insn != NULL_RTX)
    {
      rtx set = single_set (insn);

      if (set && REG_P (SET_DEST (set)))
	record_base_value (REGNO (SET_DEST (set)), SET_SRC (set), 0);

      insn = NEXT_INSN (insn);
    }
}


/* EMIT code before BEFORE_BB/BEFORE_INSN to set REG = B * M + A.  B
   is the initial value of the basic induction variable, M a
   multiplicative constant, A an additive constant and REG the
   destination register.  */

static void
loop_iv_add_mult_emit_before (const struct loop *loop, rtx b, rtx m, rtx a,
			      rtx reg, basic_block before_bb, rtx before_insn)
{
  rtx seq;

  if (! before_insn)
    {
      loop_iv_add_mult_hoist (loop, b, m, a, reg);
      return;
    }

  /* Use copy_rtx to prevent unexpected sharing of these rtx.  */
  seq = gen_add_mult (copy_rtx (b), copy_rtx (m), copy_rtx (a), reg);

  /* Increase the lifetime of any invariants moved further in code.  */
  update_reg_last_use (a, before_insn);
  update_reg_last_use (b, before_insn);
  update_reg_last_use (m, before_insn);

  /* It is possible that the expansion created lots of new registers.
     Iterate over the sequence we just created and record them all.  We
     must do this before inserting the sequence.  */
  loop_regs_update (loop, seq);

  loop_insn_emit_before (loop, before_bb, before_insn, seq);
}


/* Emit insns in loop pre-header to set REG = B * M + A.  B is the
   initial value of the basic induction variable, M a multiplicative
   constant, A an additive constant and REG the destination
   register.  */

static void
loop_iv_add_mult_sink (const struct loop *loop, rtx b, rtx m, rtx a, rtx reg)
{
  rtx seq;

  /* Use copy_rtx to prevent unexpected sharing of these rtx.  */
  seq = gen_add_mult (copy_rtx (b), copy_rtx (m), copy_rtx (a), reg);

  /* Increase the lifetime of any invariants moved further in code.
     ???? Is this really necessary?  */
  update_reg_last_use (a, loop->sink);
  update_reg_last_use (b, loop->sink);
  update_reg_last_use (m, loop->sink);

  /* It is possible that the expansion created lots of new registers.
     Iterate over the sequence we just created and record them all.  We
     must do this before inserting the sequence.  */
  loop_regs_update (loop, seq);

  loop_insn_sink (loop, seq);
}


/* Emit insns after loop to set REG = B * M + A.  B is the initial
   value of the basic induction variable, M a multiplicative constant,
   A an additive constant and REG the destination register.  */

static void
loop_iv_add_mult_hoist (const struct loop *loop, rtx b, rtx m, rtx a, rtx reg)
{
  rtx seq;

  /* Use copy_rtx to prevent unexpected sharing of these rtx.  */
  seq = gen_add_mult (copy_rtx (b), copy_rtx (m), copy_rtx (a), reg);

  /* It is possible that the expansion created lots of new registers.
     Iterate over the sequence we just created and record them all.  We
     must do this before inserting the sequence.  */
  loop_regs_update (loop, seq);

  loop_insn_hoist (loop, seq);
}


/* Similar to gen_add_mult, but compute cost rather than generating
   sequence.  */

static int
iv_add_mult_cost (rtx b, rtx m, rtx a, rtx reg)
{
  int cost = 0;
  rtx last, result;

  start_sequence ();
  result = expand_mult_add (b, reg, m, a, GET_MODE (reg), 1);
  if (reg != result)
    emit_move_insn (reg, result);
  last = get_last_insn ();
  while (last)
    {
      rtx t = single_set (last);
      if (t)
	cost += rtx_cost (SET_SRC (t), SET);
      last = PREV_INSN (last);
    }
  end_sequence ();
  return cost;
}

/* Test whether A * B can be computed without
   an actual multiply insn.  Value is 1 if so.

  ??? This function stinks because it generates a ton of wasted RTL
  ??? and as a result fragments GC memory to no end.  There are other
  ??? places in the compiler which are invoked a lot and do the same
  ??? thing, generate wasted RTL just to see if something is possible.  */

static int
product_cheap_p (rtx a, rtx b)
{
  rtx tmp;
  int win, n_insns;

  /* If only one is constant, make it B.  */
  if (GET_CODE (a) == CONST_INT)
    tmp = a, a = b, b = tmp;

  /* If first constant, both constant, so don't need multiply.  */
  if (GET_CODE (a) == CONST_INT)
    return 1;

  /* If second not constant, neither is constant, so would need multiply.  */
  if (GET_CODE (b) != CONST_INT)
    return 0;

  /* One operand is constant, so might not need multiply insn.  Generate the
     code for the multiply and see if a call or multiply, or long sequence
     of insns is generated.  */

  start_sequence ();
  expand_mult (GET_MODE (a), a, b, NULL_RTX, 1);
  tmp = get_insns ();
  end_sequence ();

  win = 1;
  if (tmp == NULL_RTX)
    ;
  else if (INSN_P (tmp))
    {
      n_insns = 0;
      while (tmp != NULL_RTX)
	{
	  rtx next = NEXT_INSN (tmp);

	  if (++n_insns > 3
	      || !NONJUMP_INSN_P (tmp)
	      || (GET_CODE (PATTERN (tmp)) == SET
		  && GET_CODE (SET_SRC (PATTERN (tmp))) == MULT)
	      || (GET_CODE (PATTERN (tmp)) == PARALLEL
		  && GET_CODE (XVECEXP (PATTERN (tmp), 0, 0)) == SET
		  && GET_CODE (SET_SRC (XVECEXP (PATTERN (tmp), 0, 0))) == MULT))
	    {
	      win = 0;
	      break;
	    }

	  tmp = next;
	}
    }
  else if (GET_CODE (tmp) == SET
	   && GET_CODE (SET_SRC (tmp)) == MULT)
    win = 0;
  else if (GET_CODE (tmp) == PARALLEL
	   && GET_CODE (XVECEXP (tmp, 0, 0)) == SET
	   && GET_CODE (SET_SRC (XVECEXP (tmp, 0, 0))) == MULT)
    win = 0;

  return win;
}

/* Check to see if loop can be terminated by a "decrement and branch until
   zero" instruction.  If so, add a REG_NONNEG note to the branch insn if so.
   Also try reversing an increment loop to a decrement loop
   to see if the optimization can be performed.
   Value is nonzero if optimization was performed.  */

/* This is useful even if the architecture doesn't have such an insn,
   because it might change a loops which increments from 0 to n to a loop
   which decrements from n to 0.  A loop that decrements to zero is usually
   faster than one that increments from zero.  */

/* ??? This could be rewritten to use some of the loop unrolling procedures,
   such as approx_final_value, biv_total_increment, loop_iterations, and
   final_[bg]iv_value.  */

static int
check_dbra_loop (struct loop *loop, int insn_count)
{
  struct loop_info *loop_info = LOOP_INFO (loop);
  struct loop_regs *regs = LOOP_REGS (loop);
  struct loop_ivs *ivs = LOOP_IVS (loop);
  struct iv_class *bl;
  rtx reg;
  enum machine_mode mode;
  rtx jump_label;
  rtx final_value;
  rtx start_value;
  rtx new_add_val;
  rtx comparison;
  rtx before_comparison;
  rtx p;
  rtx jump;
  rtx first_compare;
  int compare_and_branch;
  rtx loop_start = loop->start;
  rtx loop_end = loop->end;

  /* If last insn is a conditional branch, and the insn before tests a
     register value, try to optimize it.  Otherwise, we can't do anything.  */

  jump = PREV_INSN (loop_end);
  comparison = get_condition_for_loop (loop, jump);
  if (comparison == 0)
    return 0;
  if (!onlyjump_p (jump))
    return 0;

  /* Try to compute whether the compare/branch at the loop end is one or
     two instructions.  */
  get_condition (jump, &first_compare, false, true);
  if (first_compare == jump)
    compare_and_branch = 1;
  else if (first_compare == prev_nonnote_insn (jump))
    compare_and_branch = 2;
  else
    return 0;

  {
    /* If more than one condition is present to control the loop, then
       do not proceed, as this function does not know how to rewrite
       loop tests with more than one condition.

       Look backwards from the first insn in the last comparison
       sequence and see if we've got another comparison sequence.  */

    rtx jump1;
    if ((jump1 = prev_nonnote_insn (first_compare))
	&& JUMP_P (jump1))
	return 0;
  }

  /* Check all of the bivs to see if the compare uses one of them.
     Skip biv's set more than once because we can't guarantee that
     it will be zero on the last iteration.  Also skip if the biv is
     used between its update and the test insn.  */

  for (bl = ivs->list; bl; bl = bl->next)
    {
      if (bl->biv_count == 1
	  && ! bl->biv->maybe_multiple
	  && bl->biv->dest_reg == XEXP (comparison, 0)
	  && ! reg_used_between_p (regno_reg_rtx[bl->regno], bl->biv->insn,
				   first_compare))
	break;
    }

  /* Try swapping the comparison to identify a suitable biv.  */
  if (!bl)
    for (bl = ivs->list; bl; bl = bl->next)
      if (bl->biv_count == 1
	  && ! bl->biv->maybe_multiple
	  && bl->biv->dest_reg == XEXP (comparison, 1)
	  && ! reg_used_between_p (regno_reg_rtx[bl->regno], bl->biv->insn,
				   first_compare))
	{
	  comparison = gen_rtx_fmt_ee (swap_condition (GET_CODE (comparison)),
				       VOIDmode,
				       XEXP (comparison, 1),
				       XEXP (comparison, 0));
	  break;
	}

  if (! bl)
    return 0;

  /* Look for the case where the basic induction variable is always
     nonnegative, and equals zero on the last iteration.
     In this case, add a reg_note REG_NONNEG, which allows the
     m68k DBRA instruction to be used.  */

  if (((GET_CODE (comparison) == GT && XEXP (comparison, 1) == constm1_rtx)
       || (GET_CODE (comparison) == NE && XEXP (comparison, 1) == const0_rtx))
      && GET_CODE (bl->biv->add_val) == CONST_INT
      && INTVAL (bl->biv->add_val) < 0)
    {
      /* Initial value must be greater than 0,
	 init_val % -dec_value == 0 to ensure that it equals zero on
	 the last iteration */

      if (GET_CODE (bl->initial_value) == CONST_INT
	  && INTVAL (bl->initial_value) > 0
	  && (INTVAL (bl->initial_value)
	      % (-INTVAL (bl->biv->add_val))) == 0)
	{
	  /* Register always nonnegative, add REG_NOTE to branch.  */
	  if (! find_reg_note (jump, REG_NONNEG, NULL_RTX))
	    REG_NOTES (jump)
	      = gen_rtx_EXPR_LIST (REG_NONNEG, bl->biv->dest_reg,
				   REG_NOTES (jump));
	  bl->nonneg = 1;

	  return 1;
	}

      /* If the decrement is 1 and the value was tested as >= 0 before
	 the loop, then we can safely optimize.  */
      for (p = loop_start; p; p = PREV_INSN (p))
	{
	  if (LABEL_P (p))
	    break;
	  if (!JUMP_P (p))
	    continue;

	  before_comparison = get_condition_for_loop (loop, p);
	  if (before_comparison
	      && XEXP (before_comparison, 0) == bl->biv->dest_reg
	      && (GET_CODE (before_comparison) == LT
		  || GET_CODE (before_comparison) == LTU)
	      && XEXP (before_comparison, 1) == const0_rtx
	      && ! reg_set_between_p (bl->biv->dest_reg, p, loop_start)
	      && INTVAL (bl->biv->add_val) == -1)
	    {
	      if (! find_reg_note (jump, REG_NONNEG, NULL_RTX))
		REG_NOTES (jump)
		  = gen_rtx_EXPR_LIST (REG_NONNEG, bl->biv->dest_reg,
				       REG_NOTES (jump));
	      bl->nonneg = 1;

	      return 1;
	    }
	}
    }
  else if (GET_CODE (bl->biv->add_val) == CONST_INT
	   && INTVAL (bl->biv->add_val) > 0)
    {
      /* Try to change inc to dec, so can apply above optimization.  */
      /* Can do this if:
	 all registers modified are induction variables or invariant,
	 all memory references have non-overlapping addresses
	 (obviously true if only one write)
	 allow 2 insns for the compare/jump at the end of the loop.  */
      /* Also, we must avoid any instructions which use both the reversed
	 biv and another biv.  Such instructions will fail if the loop is
	 reversed.  We meet this condition by requiring that either
	 no_use_except_counting is true, or else that there is only
	 one biv.  */
      int num_nonfixed_reads = 0;
      /* 1 if the iteration var is used only to count iterations.  */
      int no_use_except_counting = 0;
      /* 1 if the loop has no memory store, or it has a single memory store
	 which is reversible.  */
      int reversible_mem_store = 1;

      if (bl->giv_count == 0
	  && !loop->exit_count
	  && !loop_info->has_multiple_exit_targets)
	{
	  rtx bivreg = regno_reg_rtx[bl->regno];
	  struct iv_class *blt;

	  /* If there are no givs for this biv, and the only exit is the
	     fall through at the end of the loop, then
	     see if perhaps there are no uses except to count.  */
	  no_use_except_counting = 1;
	  for (p = loop_start; p != loop_end; p = NEXT_INSN (p))
	    if (INSN_P (p))
	      {
		rtx set = single_set (p);

		if (set && REG_P (SET_DEST (set))
		    && REGNO (SET_DEST (set)) == bl->regno)
		  /* An insn that sets the biv is okay.  */
		  ;
		else if (!reg_mentioned_p (bivreg, PATTERN (p)))
		  /* An insn that doesn't mention the biv is okay.  */
		  ;
		else if (p == prev_nonnote_insn (prev_nonnote_insn (loop_end))
			 || p == prev_nonnote_insn (loop_end))
		  {
		    /* If either of these insns uses the biv and sets a pseudo
		       that has more than one usage, then the biv has uses
		       other than counting since it's used to derive a value
		       that is used more than one time.  */
		    note_stores (PATTERN (p), note_set_pseudo_multiple_uses,
				 regs);
		    if (regs->multiple_uses)
		      {
			no_use_except_counting = 0;
			break;
		      }
		  }
		else
		  {
		    no_use_except_counting = 0;
		    break;
		  }
	      }

	  /* A biv has uses besides counting if it is used to set
	     another biv.  */
	  for (blt = ivs->list; blt; blt = blt->next)
	    if (blt->init_set
		&& reg_mentioned_p (bivreg, SET_SRC (blt->init_set)))
	      {
		no_use_except_counting = 0;
		break;
	      }
	}

      if (no_use_except_counting)
	/* No need to worry about MEMs.  */
	;
      else if (loop_info->num_mem_sets <= 1)
	{
	  for (p = loop_start; p != loop_end; p = NEXT_INSN (p))
	    if (INSN_P (p))
	      num_nonfixed_reads += count_nonfixed_reads (loop, PATTERN (p));

	  /* If the loop has a single store, and the destination address is
	     invariant, then we can't reverse the loop, because this address
	     might then have the wrong value at loop exit.
	     This would work if the source was invariant also, however, in that
	     case, the insn should have been moved out of the loop.  */

	  if (loop_info->num_mem_sets == 1)
	    {
	      struct induction *v;

	      /* If we could prove that each of the memory locations
		 written to was different, then we could reverse the
		 store -- but we don't presently have any way of
		 knowing that.  */
	      reversible_mem_store = 0;

	      /* If the store depends on a register that is set after the
		 store, it depends on the initial value, and is thus not
		 reversible.  */
	      for (v = bl->giv; reversible_mem_store && v; v = v->next_iv)
		{
		  if (v->giv_type == DEST_REG
		      && reg_mentioned_p (v->dest_reg,
					  PATTERN (loop_info->first_loop_store_insn))
		      && loop_insn_first_p (loop_info->first_loop_store_insn,
					    v->insn))
		    reversible_mem_store = 0;
		}
	    }
	}
      else
	return 0;

      /* This code only acts for innermost loops.  Also it simplifies
	 the memory address check by only reversing loops with
	 zero or one memory access.
	 Two memory accesses could involve parts of the same array,
	 and that can't be reversed.
	 If the biv is used only for counting, than we don't need to worry
	 about all these things.  */

      if ((num_nonfixed_reads <= 1
	   && ! loop_info->has_nonconst_call
	   && ! loop_info->has_prefetch
	   && ! loop_info->has_volatile
	   && reversible_mem_store
	   && (bl->giv_count + bl->biv_count + loop_info->num_mem_sets
	       + num_unmoved_movables (loop) + compare_and_branch == insn_count)
	   && (bl == ivs->list && bl->next == 0))
	  || (no_use_except_counting && ! loop_info->has_prefetch))
	{
	  rtx tem;

	  /* Loop can be reversed.  */
	  if (loop_dump_stream)
	    fprintf (loop_dump_stream, "Can reverse loop\n");

	  /* Now check other conditions:

	     The increment must be a constant, as must the initial value,
	     and the comparison code must be LT.

	     This test can probably be improved since +/- 1 in the constant
	     can be obtained by changing LT to LE and vice versa; this is
	     confusing.  */

	  if (comparison
	      /* for constants, LE gets turned into LT */
	      && (GET_CODE (comparison) == LT
		  || (GET_CODE (comparison) == LE
		      && no_use_except_counting) 
		  || GET_CODE (comparison) == LTU))
	    {
	      HOST_WIDE_INT add_val, add_adjust, comparison_val = 0;
	      rtx initial_value, comparison_value;
	      int nonneg = 0;
	      enum rtx_code cmp_code;
	      int comparison_const_width;
	      unsigned HOST_WIDE_INT comparison_sign_mask;
	      bool keep_first_compare;

	      add_val = INTVAL (bl->biv->add_val);
	      comparison_value = XEXP (comparison, 1);
	      if (GET_MODE (comparison_value) == VOIDmode)
		comparison_const_width
		  = GET_MODE_BITSIZE (GET_MODE (XEXP (comparison, 0)));
	      else
		comparison_const_width
		  = GET_MODE_BITSIZE (GET_MODE (comparison_value));
	      if (comparison_const_width > HOST_BITS_PER_WIDE_INT)
		comparison_const_width = HOST_BITS_PER_WIDE_INT;
	      comparison_sign_mask
		= (unsigned HOST_WIDE_INT) 1 << (comparison_const_width - 1);

	      /* If the comparison value is not a loop invariant, then we
		 can not reverse this loop.

		 ??? If the insns which initialize the comparison value as
		 a whole compute an invariant result, then we could move
		 them out of the loop and proceed with loop reversal.  */
	      if (! loop_invariant_p (loop, comparison_value))
		return 0;

	      if (GET_CODE (comparison_value) == CONST_INT)
		comparison_val = INTVAL (comparison_value);
	      initial_value = bl->initial_value;

	      /* Normalize the initial value if it is an integer and
		 has no other use except as a counter.  This will allow
		 a few more loops to be reversed.  */
	      if (no_use_except_counting
		  && GET_CODE (comparison_value) == CONST_INT
		  && GET_CODE (initial_value) == CONST_INT)
		{
		  comparison_val = comparison_val - INTVAL (bl->initial_value);
		  /* The code below requires comparison_val to be a multiple
		     of add_val in order to do the loop reversal, so
		     round up comparison_val to a multiple of add_val.
		     Since comparison_value is constant, we know that the
		     current comparison code is LT.  */
		  comparison_val = comparison_val + add_val - 1;
		  comparison_val
		    -= (unsigned HOST_WIDE_INT) comparison_val % add_val;
		  /* We postpone overflow checks for COMPARISON_VAL here;
		     even if there is an overflow, we might still be able to
		     reverse the loop, if converting the loop exit test to
		     NE is possible.  */
		  initial_value = const0_rtx;
		}

	      /* First check if we can do a vanilla loop reversal.  */
	      if (initial_value == const0_rtx
		  && GET_CODE (comparison_value) == CONST_INT
		     /* Now do postponed overflow checks on COMPARISON_VAL.  */
		  && ! (((comparison_val - add_val) ^ INTVAL (comparison_value))
			& comparison_sign_mask))
		{
		  /* Register will always be nonnegative, with value
		     0 on last iteration */
		  add_adjust = add_val;
		  nonneg = 1;
		  cmp_code = GE;
		}
	      else
		return 0;

	      if (GET_CODE (comparison) == LE)
		add_adjust -= add_val;

	      /* If the initial value is not zero, or if the comparison
		 value is not an exact multiple of the increment, then we
		 can not reverse this loop.  */
	      if (initial_value == const0_rtx
		  && GET_CODE (comparison_value) == CONST_INT)
		{
		  if (((unsigned HOST_WIDE_INT) comparison_val % add_val) != 0)
		    return 0;
		}
	      else
		{
		  if (! no_use_except_counting || add_val != 1)
		    return 0;
		}

	      final_value = comparison_value;

	      /* Reset these in case we normalized the initial value
		 and comparison value above.  */
	      if (GET_CODE (comparison_value) == CONST_INT
		  && GET_CODE (initial_value) == CONST_INT)
		{
		  comparison_value = GEN_INT (comparison_val);
		  final_value
		    = GEN_INT (comparison_val + INTVAL (bl->initial_value));
		}
	      bl->initial_value = initial_value;

	      /* Save some info needed to produce the new insns.  */
	      reg = bl->biv->dest_reg;
	      mode = GET_MODE (reg);
	      jump_label = condjump_label (PREV_INSN (loop_end));
	      new_add_val = GEN_INT (-INTVAL (bl->biv->add_val));

	      /* Set start_value; if this is not a CONST_INT, we need
		 to generate a SUB.
		 Initialize biv to start_value before loop start.
		 The old initializing insn will be deleted as a
		 dead store by flow.c.  */
	      if (initial_value == const0_rtx
		  && GET_CODE (comparison_value) == CONST_INT)
		{
		  start_value
		    = gen_int_mode (comparison_val - add_adjust, mode);
		  loop_insn_hoist (loop, gen_move_insn (reg, start_value));
		}
	      else if (GET_CODE (initial_value) == CONST_INT)
		{
		  rtx offset = GEN_INT (-INTVAL (initial_value) - add_adjust);
		  rtx add_insn = gen_add3_insn (reg, comparison_value, offset);

		  if (add_insn == 0)
		    return 0;

		  start_value
		    = gen_rtx_PLUS (mode, comparison_value, offset);
		  loop_insn_hoist (loop, add_insn);
		  if (GET_CODE (comparison) == LE)
		    final_value = gen_rtx_PLUS (mode, comparison_value,
						GEN_INT (add_val));
		}
	      else if (! add_adjust)
		{
		  rtx sub_insn = gen_sub3_insn (reg, comparison_value,
						initial_value);

		  if (sub_insn == 0)
		    return 0;
		  start_value
		    = gen_rtx_MINUS (mode, comparison_value, initial_value);
		  loop_insn_hoist (loop, sub_insn);
		}
	      else
		/* We could handle the other cases too, but it'll be
		   better to have a testcase first.  */
		return 0;

	      /* We may not have a single insn which can increment a reg, so
		 create a sequence to hold all the insns from expand_inc.  */
	      start_sequence ();
	      expand_inc (reg, new_add_val);
	      tem = get_insns ();
	      end_sequence ();

	      p = loop_insn_emit_before (loop, 0, bl->biv->insn, tem);
	      delete_insn (bl->biv->insn);

	      /* Update biv info to reflect its new status.  */
	      bl->biv->insn = p;
	      bl->initial_value = start_value;
	      bl->biv->add_val = new_add_val;

	      /* Update loop info.  */
	      loop_info->initial_value = reg;
	      loop_info->initial_equiv_value = reg;
	      loop_info->final_value = const0_rtx;
	      loop_info->final_equiv_value = const0_rtx;
	      loop_info->comparison_value = const0_rtx;
	      loop_info->comparison_code = cmp_code;
	      loop_info->increment = new_add_val;

	      /* Inc LABEL_NUSES so that delete_insn will
		 not delete the label.  */
	      LABEL_NUSES (XEXP (jump_label, 0))++;

	      /* If we have a separate comparison insn that does more
		 than just set cc0, the result of the comparison might
		 be used outside the loop.  */
	      keep_first_compare = (compare_and_branch == 2
#ifdef HAVE_CC0
				    && sets_cc0_p (first_compare) <= 0
#endif
				    );

	      /* Emit an insn after the end of the loop to set the biv's
		 proper exit value if it is used anywhere outside the loop.  */
	      if (keep_first_compare
		  || (REGNO_LAST_UID (bl->regno) != INSN_UID (first_compare))
		  || ! bl->init_insn
		  || REGNO_FIRST_UID (bl->regno) != INSN_UID (bl->init_insn))
		loop_insn_sink (loop, gen_load_of_final_value (reg, final_value));

	      if (keep_first_compare)
		loop_insn_sink (loop, PATTERN (first_compare));

	      /* Delete compare/branch at end of loop.  */
	      delete_related_insns (PREV_INSN (loop_end));
	      if (compare_and_branch == 2)
		delete_related_insns (first_compare);

	      /* Add new compare/branch insn at end of loop.  */
	      start_sequence ();
	      emit_cmp_and_jump_insns (reg, const0_rtx, cmp_code, NULL_RTX,
				       mode, 0,
				       XEXP (jump_label, 0));
	      tem = get_insns ();
	      end_sequence ();
	      emit_jump_insn_before (tem, loop_end);

	      for (tem = PREV_INSN (loop_end);
		   tem && !JUMP_P (tem);
		   tem = PREV_INSN (tem))
		;

	      if (tem)
		JUMP_LABEL (tem) = XEXP (jump_label, 0);

	      if (nonneg)
		{
		  if (tem)
		    {
		      /* Increment of LABEL_NUSES done above.  */
		      /* Register is now always nonnegative,
			 so add REG_NONNEG note to the branch.  */
		      REG_NOTES (tem) = gen_rtx_EXPR_LIST (REG_NONNEG, reg,
							   REG_NOTES (tem));
		    }
		  bl->nonneg = 1;
		}

	      /* No insn may reference both the reversed and another biv or it
		 will fail (see comment near the top of the loop reversal
		 code).
		 Earlier on, we have verified that the biv has no use except
		 counting, or it is the only biv in this function.
		 However, the code that computes no_use_except_counting does
		 not verify reg notes.  It's possible to have an insn that
		 references another biv, and has a REG_EQUAL note with an
		 expression based on the reversed biv.  To avoid this case,
		 remove all REG_EQUAL notes based on the reversed biv
		 here.  */
	      for (p = loop_start; p != loop_end; p = NEXT_INSN (p))
		if (INSN_P (p))
		  {
		    rtx *pnote;
		    rtx set = single_set (p);
		    /* If this is a set of a GIV based on the reversed biv, any
		       REG_EQUAL notes should still be correct.  */
		    if (! set
			|| !REG_P (SET_DEST (set))
			|| (size_t) REGNO (SET_DEST (set)) >= ivs->n_regs
			|| REG_IV_TYPE (ivs, REGNO (SET_DEST (set))) != GENERAL_INDUCT
			|| REG_IV_INFO (ivs, REGNO (SET_DEST (set)))->src_reg != bl->biv->src_reg)
		      for (pnote = &REG_NOTES (p); *pnote;)
			{
			  if (REG_NOTE_KIND (*pnote) == REG_EQUAL
			      && reg_mentioned_p (regno_reg_rtx[bl->regno],
						  XEXP (*pnote, 0)))
			    *pnote = XEXP (*pnote, 1);
			  else
			    pnote = &XEXP (*pnote, 1);
			}
		  }

	      /* Mark that this biv has been reversed.  Each giv which depends
		 on this biv, and which is also live past the end of the loop
		 will have to be fixed up.  */

	      bl->reversed = 1;

	      if (loop_dump_stream)
		{
		  fprintf (loop_dump_stream, "Reversed loop");
		  if (bl->nonneg)
		    fprintf (loop_dump_stream, " and added reg_nonneg\n");
		  else
		    fprintf (loop_dump_stream, "\n");
		}

	      return 1;
	    }
	}
    }

  return 0;
}

/* Verify whether the biv BL appears to be eliminable,
   based on the insns in the loop that refer to it.

   If ELIMINATE_P is nonzero, actually do the elimination.

   THRESHOLD and INSN_COUNT are from loop_optimize and are used to
   determine whether invariant insns should be placed inside or at the
   start of the loop.  */

static int
maybe_eliminate_biv (const struct loop *loop, struct iv_class *bl,
		     int eliminate_p, int threshold, int insn_count)
{
  struct loop_ivs *ivs = LOOP_IVS (loop);
  rtx reg = bl->biv->dest_reg;
  rtx p;

  /* Scan all insns in the loop, stopping if we find one that uses the
     biv in a way that we cannot eliminate.  */

  for (p = loop->start; p != loop->end; p = NEXT_INSN (p))
    {
      enum rtx_code code = GET_CODE (p);
      basic_block where_bb = 0;
      rtx where_insn = threshold >= insn_count ? 0 : p;
      rtx note;

      /* If this is a libcall that sets a giv, skip ahead to its end.  */
      if (INSN_P (p))
	{
	  note = find_reg_note (p, REG_LIBCALL, NULL_RTX);

	  if (note)
	    {
	      rtx last = XEXP (note, 0);
	      rtx set = single_set (last);

	      if (set && REG_P (SET_DEST (set)))
		{
		  unsigned int regno = REGNO (SET_DEST (set));

		  if (regno < ivs->n_regs
		      && REG_IV_TYPE (ivs, regno) == GENERAL_INDUCT
		      && REG_IV_INFO (ivs, regno)->src_reg == bl->biv->src_reg)
		    p = last;
		}
	    }
	}

      /* Closely examine the insn if the biv is mentioned.  */
      if ((code == INSN || code == JUMP_INSN || code == CALL_INSN)
	  && reg_mentioned_p (reg, PATTERN (p))
	  && ! maybe_eliminate_biv_1 (loop, PATTERN (p), p, bl,
				      eliminate_p, where_bb, where_insn))
	{
	  if (loop_dump_stream)
	    fprintf (loop_dump_stream,
		     "Cannot eliminate biv %d: biv used in insn %d.\n",
		     bl->regno, INSN_UID (p));
	  break;
	}

      /* If we are eliminating, kill REG_EQUAL notes mentioning the biv.  */
      if (eliminate_p
	  && (note = find_reg_note (p, REG_EQUAL, NULL_RTX)) != NULL_RTX
	  && reg_mentioned_p (reg, XEXP (note, 0)))
	remove_note (p, note);
    }

  if (p == loop->end)
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream, "biv %d %s eliminated.\n",
		 bl->regno, eliminate_p ? "was" : "can be");
      return 1;
    }

  return 0;
}

/* INSN and REFERENCE are instructions in the same insn chain.
   Return nonzero if INSN is first.  */

static int
loop_insn_first_p (rtx insn, rtx reference)
{
  rtx p, q;

  for (p = insn, q = reference;;)
    {
      /* Start with test for not first so that INSN == REFERENCE yields not
         first.  */
      if (q == insn || ! p)
	return 0;
      if (p == reference || ! q)
	return 1;

      /* Either of P or Q might be a NOTE.  Notes have the same LUID as the
         previous insn, hence the <= comparison below does not work if
	 P is a note.  */
      if (INSN_UID (p) < max_uid_for_loop
	  && INSN_UID (q) < max_uid_for_loop
	  && !NOTE_P (p))
	return INSN_LUID (p) <= INSN_LUID (q);

      if (INSN_UID (p) >= max_uid_for_loop
	  || NOTE_P (p))
	p = NEXT_INSN (p);
      if (INSN_UID (q) >= max_uid_for_loop)
	q = NEXT_INSN (q);
    }
}

/* We are trying to eliminate BIV in INSN using GIV.  Return nonzero if
   the offset that we have to take into account due to auto-increment /
   div derivation is zero.  */
static int
biv_elimination_giv_has_0_offset (struct induction *biv,
				  struct induction *giv, rtx insn)
{
  /* If the giv V had the auto-inc address optimization applied
     to it, and INSN occurs between the giv insn and the biv
     insn, then we'd have to adjust the value used here.
     This is rare, so we don't bother to make this possible.  */
  if (giv->auto_inc_opt
      && ((loop_insn_first_p (giv->insn, insn)
	   && loop_insn_first_p (insn, biv->insn))
	  || (loop_insn_first_p (biv->insn, insn)
	      && loop_insn_first_p (insn, giv->insn))))
    return 0;

  return 1;
}

/* If BL appears in X (part of the pattern of INSN), see if we can
   eliminate its use.  If so, return 1.  If not, return 0.

   If BIV does not appear in X, return 1.

   If ELIMINATE_P is nonzero, actually do the elimination.
   WHERE_INSN/WHERE_BB indicate where extra insns should be added.
   Depending on how many items have been moved out of the loop, it
   will either be before INSN (when WHERE_INSN is nonzero) or at the
   start of the loop (when WHERE_INSN is zero).  */

static int
maybe_eliminate_biv_1 (const struct loop *loop, rtx x, rtx insn,
		       struct iv_class *bl, int eliminate_p,
		       basic_block where_bb, rtx where_insn)
{
  enum rtx_code code = GET_CODE (x);
  rtx reg = bl->biv->dest_reg;
  enum machine_mode mode = GET_MODE (reg);
  struct induction *v;
  rtx arg, tem;
#ifdef HAVE_cc0
  rtx new;
#endif
  int arg_operand;
  const char *fmt;
  int i, j;

  switch (code)
    {
    case REG:
      /* If we haven't already been able to do something with this BIV,
	 we can't eliminate it.  */
      if (x == reg)
	return 0;
      return 1;

    case SET:
      /* If this sets the BIV, it is not a problem.  */
      if (SET_DEST (x) == reg)
	return 1;

      /* If this is an insn that defines a giv, it is also ok because
	 it will go away when the giv is reduced.  */
      for (v = bl->giv; v; v = v->next_iv)
	if (v->giv_type == DEST_REG && SET_DEST (x) == v->dest_reg)
	  return 1;

#ifdef HAVE_cc0
      if (SET_DEST (x) == cc0_rtx && SET_SRC (x) == reg)
	{
	  /* Can replace with any giv that was reduced and
	     that has (MULT_VAL != 0) and (ADD_VAL == 0).
	     Require a constant for MULT_VAL, so we know it's nonzero.
	     ??? We disable this optimization to avoid potential
	     overflows.  */

	  for (v = bl->giv; v; v = v->next_iv)
	    if (GET_CODE (v->mult_val) == CONST_INT && v->mult_val != const0_rtx
		&& v->add_val == const0_rtx
		&& ! v->ignore && ! v->maybe_dead && v->always_computable
		&& v->mode == mode
		&& 0)
	      {
		if (! biv_elimination_giv_has_0_offset (bl->biv, v, insn))
		  continue;

		if (! eliminate_p)
		  return 1;

		/* If the giv has the opposite direction of change,
		   then reverse the comparison.  */
		if (INTVAL (v->mult_val) < 0)
		  new = gen_rtx_COMPARE (GET_MODE (v->new_reg),
					 const0_rtx, v->new_reg);
		else
		  new = v->new_reg;

		/* We can probably test that giv's reduced reg.  */
		if (validate_change (insn, &SET_SRC (x), new, 0))
		  return 1;
	      }

	  /* Look for a giv with (MULT_VAL != 0) and (ADD_VAL != 0);
	     replace test insn with a compare insn (cmp REDUCED_GIV ADD_VAL).
	     Require a constant for MULT_VAL, so we know it's nonzero.
	     ??? Do this only if ADD_VAL is a pointer to avoid a potential
	     overflow problem.  */

	  for (v = bl->giv; v; v = v->next_iv)
	    if (GET_CODE (v->mult_val) == CONST_INT
		&& v->mult_val != const0_rtx
		&& ! v->ignore && ! v->maybe_dead && v->always_computable
		&& v->mode == mode
		&& (GET_CODE (v->add_val) == SYMBOL_REF
		    || GET_CODE (v->add_val) == LABEL_REF
		    || GET_CODE (v->add_val) == CONST
		    || (REG_P (v->add_val)
			&& REG_POINTER (v->add_val))))
	      {
		if (! biv_elimination_giv_has_0_offset (bl->biv, v, insn))
		  continue;

		if (! eliminate_p)
		  return 1;

		/* If the giv has the opposite direction of change,
		   then reverse the comparison.  */
		if (INTVAL (v->mult_val) < 0)
		  new = gen_rtx_COMPARE (VOIDmode, copy_rtx (v->add_val),
					 v->new_reg);
		else
		  new = gen_rtx_COMPARE (VOIDmode, v->new_reg,
					 copy_rtx (v->add_val));

		/* Replace biv with the giv's reduced register.  */
		update_reg_last_use (v->add_val, insn);
		if (validate_change (insn, &SET_SRC (PATTERN (insn)), new, 0))
		  return 1;

		/* Insn doesn't support that constant or invariant.  Copy it
		   into a register (it will be a loop invariant.)  */
		tem = gen_reg_rtx (GET_MODE (v->new_reg));

		loop_insn_emit_before (loop, 0, where_insn,
				       gen_move_insn (tem,
						      copy_rtx (v->add_val)));

		/* Substitute the new register for its invariant value in
		   the compare expression.  */
		XEXP (new, (INTVAL (v->mult_val) < 0) ? 0 : 1) = tem;
		if (validate_change (insn, &SET_SRC (PATTERN (insn)), new, 0))
		  return 1;
	      }
	}
#endif
      break;

    case COMPARE:
    case EQ:  case NE:
    case GT:  case GE:  case GTU:  case GEU:
    case LT:  case LE:  case LTU:  case LEU:
      /* See if either argument is the biv.  */
      if (XEXP (x, 0) == reg)
	arg = XEXP (x, 1), arg_operand = 1;
      else if (XEXP (x, 1) == reg)
	arg = XEXP (x, 0), arg_operand = 0;
      else
	break;

      if (CONSTANT_P (arg))
	{
	  /* First try to replace with any giv that has constant positive
	     mult_val and constant add_val.  We might be able to support
	     negative mult_val, but it seems complex to do it in general.  */

	  for (v = bl->giv; v; v = v->next_iv)
	    if (GET_CODE (v->mult_val) == CONST_INT
		&& INTVAL (v->mult_val) > 0
		&& (GET_CODE (v->add_val) == SYMBOL_REF
		    || GET_CODE (v->add_val) == LABEL_REF
		    || GET_CODE (v->add_val) == CONST
		    || (REG_P (v->add_val)
			&& REG_POINTER (v->add_val)))
		&& ! v->ignore && ! v->maybe_dead && v->always_computable
		&& v->mode == mode)
	      {
		if (! biv_elimination_giv_has_0_offset (bl->biv, v, insn))
		  continue;

		/* Don't eliminate if the linear combination that makes up
		   the giv overflows when it is applied to ARG.  */
		if (GET_CODE (arg) == CONST_INT)
		  {
		    rtx add_val;

		    if (GET_CODE (v->add_val) == CONST_INT)
		      add_val = v->add_val;
		    else
		      add_val = const0_rtx;

		    if (const_mult_add_overflow_p (arg, v->mult_val,
						   add_val, mode, 1))
		      continue;
		  }

		if (! eliminate_p)
		  return 1;

		/* Replace biv with the giv's reduced reg.  */
		validate_change (insn, &XEXP (x, 1 - arg_operand), v->new_reg, 1);

		/* If all constants are actually constant integers and
		   the derived constant can be directly placed in the COMPARE,
		   do so.  */
		if (GET_CODE (arg) == CONST_INT
		    && GET_CODE (v->add_val) == CONST_INT)
		  {
		    tem = expand_mult_add (arg, NULL_RTX, v->mult_val,
					   v->add_val, mode, 1);
		  }
		else
		  {
		    /* Otherwise, load it into a register.  */
		    tem = gen_reg_rtx (mode);
		    loop_iv_add_mult_emit_before (loop, arg,
						  v->mult_val, v->add_val,
						  tem, where_bb, where_insn);
		  }

		validate_change (insn, &XEXP (x, arg_operand), tem, 1);

		if (apply_change_group ())
		  return 1;
	      }

	  /* Look for giv with positive constant mult_val and nonconst add_val.
	     Insert insns to calculate new compare value.
	     ??? Turn this off due to possible overflow.  */

	  for (v = bl->giv; v; v = v->next_iv)
	    if (GET_CODE (v->mult_val) == CONST_INT
		&& INTVAL (v->mult_val) > 0
		&& ! v->ignore && ! v->maybe_dead && v->always_computable
		&& v->mode == mode
		&& 0)
	      {
		rtx tem;

		if (! biv_elimination_giv_has_0_offset (bl->biv, v, insn))
		  continue;

		if (! eliminate_p)
		  return 1;

		tem = gen_reg_rtx (mode);

		/* Replace biv with giv's reduced register.  */
		validate_change (insn, &XEXP (x, 1 - arg_operand),
				 v->new_reg, 1);

		/* Compute value to compare against.  */
		loop_iv_add_mult_emit_before (loop, arg,
					      v->mult_val, v->add_val,
					      tem, where_bb, where_insn);
		/* Use it in this insn.  */
		validate_change (insn, &XEXP (x, arg_operand), tem, 1);
		if (apply_change_group ())
		  return 1;
	      }
	}
      else if (REG_P (arg) || MEM_P (arg))
	{
	  if (loop_invariant_p (loop, arg) == 1)
	    {
	      /* Look for giv with constant positive mult_val and nonconst
		 add_val. Insert insns to compute new compare value.
		 ??? Turn this off due to possible overflow.  */

	      for (v = bl->giv; v; v = v->next_iv)
		if (GET_CODE (v->mult_val) == CONST_INT && INTVAL (v->mult_val) > 0
		    && ! v->ignore && ! v->maybe_dead && v->always_computable
		    && v->mode == mode
		    && 0)
		  {
		    rtx tem;

		    if (! biv_elimination_giv_has_0_offset (bl->biv, v, insn))
		      continue;

		    if (! eliminate_p)
		      return 1;

		    tem = gen_reg_rtx (mode);

		    /* Replace biv with giv's reduced register.  */
		    validate_change (insn, &XEXP (x, 1 - arg_operand),
				     v->new_reg, 1);

		    /* Compute value to compare against.  */
		    loop_iv_add_mult_emit_before (loop, arg,
						  v->mult_val, v->add_val,
						  tem, where_bb, where_insn);
		    validate_change (insn, &XEXP (x, arg_operand), tem, 1);
		    if (apply_change_group ())
		      return 1;
		  }
	    }

	  /* This code has problems.  Basically, you can't know when
	     seeing if we will eliminate BL, whether a particular giv
	     of ARG will be reduced.  If it isn't going to be reduced,
	     we can't eliminate BL.  We can try forcing it to be reduced,
	     but that can generate poor code.

	     The problem is that the benefit of reducing TV, below should
	     be increased if BL can actually be eliminated, but this means
	     we might have to do a topological sort of the order in which
	     we try to process biv.  It doesn't seem worthwhile to do
	     this sort of thing now.  */

#if 0
	  /* Otherwise the reg compared with had better be a biv.  */
	  if (!REG_P (arg)
	      || REG_IV_TYPE (ivs, REGNO (arg)) != BASIC_INDUCT)
	    return 0;

	  /* Look for a pair of givs, one for each biv,
	     with identical coefficients.  */
	  for (v = bl->giv; v; v = v->next_iv)
	    {
	      struct induction *tv;

	      if (v->ignore || v->maybe_dead || v->mode != mode)
		continue;

	      for (tv = REG_IV_CLASS (ivs, REGNO (arg))->giv; tv;
		   tv = tv->next_iv)
		if (! tv->ignore && ! tv->maybe_dead
		    && rtx_equal_p (tv->mult_val, v->mult_val)
		    && rtx_equal_p (tv->add_val, v->add_val)
		    && tv->mode == mode)
		  {
		    if (! biv_elimination_giv_has_0_offset (bl->biv, v, insn))
		      continue;

		    if (! eliminate_p)
		      return 1;

		    /* Replace biv with its giv's reduced reg.  */
		    XEXP (x, 1 - arg_operand) = v->new_reg;
		    /* Replace other operand with the other giv's
		       reduced reg.  */
		    XEXP (x, arg_operand) = tv->new_reg;
		    return 1;
		  }
	    }
#endif
	}

      /* If we get here, the biv can't be eliminated.  */
      return 0;

    case MEM:
      /* If this address is a DEST_ADDR giv, it doesn't matter if the
	 biv is used in it, since it will be replaced.  */
      for (v = bl->giv; v; v = v->next_iv)
	if (v->giv_type == DEST_ADDR && v->location == &XEXP (x, 0))
	  return 1;
      break;

    default:
      break;
    }

  /* See if any subexpression fails elimination.  */
  fmt = GET_RTX_FORMAT (code);
  for (i = GET_RTX_LENGTH (code) - 1; i >= 0; i--)
    {
      switch (fmt[i])
	{
	case 'e':
	  if (! maybe_eliminate_biv_1 (loop, XEXP (x, i), insn, bl,
				       eliminate_p, where_bb, where_insn))
	    return 0;
	  break;

	case 'E':
	  for (j = XVECLEN (x, i) - 1; j >= 0; j--)
	    if (! maybe_eliminate_biv_1 (loop, XVECEXP (x, i, j), insn, bl,
					 eliminate_p, where_bb, where_insn))
	      return 0;
	  break;
	}
    }

  return 1;
}

/* Return nonzero if the last use of REG
   is in an insn following INSN in the same basic block.  */

static int
last_use_this_basic_block (rtx reg, rtx insn)
{
  rtx n;
  for (n = insn;
       n && !LABEL_P (n) && !JUMP_P (n);
       n = NEXT_INSN (n))
    {
      if (REGNO_LAST_UID (REGNO (reg)) == INSN_UID (n))
	return 1;
    }
  return 0;
}

/* Called via `note_stores' to record the initial value of a biv.  Here we
   just record the location of the set and process it later.  */

static void
record_initial (rtx dest, rtx set, void *data ATTRIBUTE_UNUSED)
{
  struct loop_ivs *ivs = (struct loop_ivs *) data;
  struct iv_class *bl;

  if (!REG_P (dest)
      || REGNO (dest) >= ivs->n_regs
      || REG_IV_TYPE (ivs, REGNO (dest)) != BASIC_INDUCT)
    return;

  bl = REG_IV_CLASS (ivs, REGNO (dest));

  /* If this is the first set found, record it.  */
  if (bl->init_insn == 0)
    {
      bl->init_insn = note_insn;
      bl->init_set = set;
    }
}

/* If any of the registers in X are "old" and currently have a last use earlier
   than INSN, update them to have a last use of INSN.  Their actual last use
   will be the previous insn but it will not have a valid uid_luid so we can't
   use it.  X must be a source expression only.  */

static void
update_reg_last_use (rtx x, rtx insn)
{
  /* Check for the case where INSN does not have a valid luid.  In this case,
     there is no need to modify the regno_last_uid, as this can only happen
     when code is inserted after the loop_end to set a pseudo's final value,
     and hence this insn will never be the last use of x.
     ???? This comment is not correct.  See for example loop_givs_reduce.
     This may insert an insn before another new insn.  */
  if (REG_P (x) && REGNO (x) < max_reg_before_loop
      && INSN_UID (insn) < max_uid_for_loop
      && REGNO_LAST_LUID (REGNO (x)) < INSN_LUID (insn))
    {
      REGNO_LAST_UID (REGNO (x)) = INSN_UID (insn);
    }
  else
    {
      int i, j;
      const char *fmt = GET_RTX_FORMAT (GET_CODE (x));
      for (i = GET_RTX_LENGTH (GET_CODE (x)) - 1; i >= 0; i--)
	{
	  if (fmt[i] == 'e')
	    update_reg_last_use (XEXP (x, i), insn);
	  else if (fmt[i] == 'E')
	    for (j = XVECLEN (x, i) - 1; j >= 0; j--)
	      update_reg_last_use (XVECEXP (x, i, j), insn);
	}
    }
}

/* Similar to rtlanal.c:get_condition, except that we also put an
   invariant last unless both operands are invariants.  */

static rtx
get_condition_for_loop (const struct loop *loop, rtx x)
{
  rtx comparison = get_condition (x, (rtx*) 0, false, true);

  if (comparison == 0
      || ! loop_invariant_p (loop, XEXP (comparison, 0))
      || loop_invariant_p (loop, XEXP (comparison, 1)))
    return comparison;

  return gen_rtx_fmt_ee (swap_condition (GET_CODE (comparison)), VOIDmode,
			 XEXP (comparison, 1), XEXP (comparison, 0));
}

/* Scan the function and determine whether it has indirect (computed) jumps.

   This is taken mostly from flow.c; similar code exists elsewhere
   in the compiler.  It may be useful to put this into rtlanal.c.  */
static int
indirect_jump_in_function_p (rtx start)
{
  rtx insn;

  for (insn = start; insn; insn = NEXT_INSN (insn))
    if (computed_jump_p (insn))
      return 1;

  return 0;
}

/* Add MEM to the LOOP_MEMS array, if appropriate.  See the
   documentation for LOOP_MEMS for the definition of `appropriate'.
   This function is called from prescan_loop via for_each_rtx.  */

static int
insert_loop_mem (rtx *mem, void *data ATTRIBUTE_UNUSED)
{
  struct loop_info *loop_info = data;
  int i;
  rtx m = *mem;

  if (m == NULL_RTX)
    return 0;

  switch (GET_CODE (m))
    {
    case MEM:
      break;

    case CLOBBER:
      /* We're not interested in MEMs that are only clobbered.  */
      return -1;

    case CONST_DOUBLE:
      /* We're not interested in the MEM associated with a
	 CONST_DOUBLE, so there's no need to traverse into this.  */
      return -1;

    case EXPR_LIST:
      /* We're not interested in any MEMs that only appear in notes.  */
      return -1;

    default:
      /* This is not a MEM.  */
      return 0;
    }

  /* See if we've already seen this MEM.  */
  for (i = 0; i < loop_info->mems_idx; ++i)
    if (rtx_equal_p (m, loop_info->mems[i].mem))
      {
	if (MEM_VOLATILE_P (m) && !MEM_VOLATILE_P (loop_info->mems[i].mem))
	  loop_info->mems[i].mem = m;
	if (GET_MODE (m) != GET_MODE (loop_info->mems[i].mem))
	  /* The modes of the two memory accesses are different.  If
	     this happens, something tricky is going on, and we just
	     don't optimize accesses to this MEM.  */
	  loop_info->mems[i].optimize = 0;

	return 0;
      }

  /* Resize the array, if necessary.  */
  if (loop_info->mems_idx == loop_info->mems_allocated)
    {
      if (loop_info->mems_allocated != 0)
	loop_info->mems_allocated *= 2;
      else
	loop_info->mems_allocated = 32;

      loop_info->mems = xrealloc (loop_info->mems,
				  loop_info->mems_allocated * sizeof (loop_mem_info));
    }

  /* Actually insert the MEM.  */
  loop_info->mems[loop_info->mems_idx].mem = m;
  /* We can't hoist this MEM out of the loop if it's a BLKmode MEM
     because we can't put it in a register.  We still store it in the
     table, though, so that if we see the same address later, but in a
     non-BLK mode, we'll not think we can optimize it at that point.  */
  loop_info->mems[loop_info->mems_idx].optimize = (GET_MODE (m) != BLKmode);
  loop_info->mems[loop_info->mems_idx].reg = NULL_RTX;
  ++loop_info->mems_idx;

  return 0;
}


/* Allocate REGS->ARRAY or reallocate it if it is too small.

   Increment REGS->ARRAY[I].SET_IN_LOOP at the index I of each
   register that is modified by an insn between FROM and TO.  If the
   value of an element of REGS->array[I].SET_IN_LOOP becomes 127 or
   more, stop incrementing it, to avoid overflow.

   Store in REGS->ARRAY[I].SINGLE_USAGE the single insn in which
   register I is used, if it is only used once.  Otherwise, it is set
   to 0 (for no uses) or const0_rtx for more than one use.  This
   parameter may be zero, in which case this processing is not done.

   Set REGS->ARRAY[I].MAY_NOT_OPTIMIZE nonzero if we should not
   optimize register I.  */

static void
loop_regs_scan (const struct loop *loop, int extra_size)
{
  struct loop_regs *regs = LOOP_REGS (loop);
  int old_nregs;
  /* last_set[n] is nonzero iff reg n has been set in the current
   basic block.  In that case, it is the insn that last set reg n.  */
  rtx *last_set;
  rtx insn;
  int i;

  old_nregs = regs->num;
  regs->num = max_reg_num ();

  /* Grow the regs array if not allocated or too small.  */
  if (regs->num >= regs->size)
    {
      regs->size = regs->num + extra_size;

      regs->array = xrealloc (regs->array, regs->size * sizeof (*regs->array));

      /* Zero the new elements.  */
      memset (regs->array + old_nregs, 0,
	      (regs->size - old_nregs) * sizeof (*regs->array));
    }

  /* Clear previously scanned fields but do not clear n_times_set.  */
  for (i = 0; i < old_nregs; i++)
    {
      regs->array[i].set_in_loop = 0;
      regs->array[i].may_not_optimize = 0;
      regs->array[i].single_usage = NULL_RTX;
    }

  last_set = xcalloc (regs->num, sizeof (rtx));

  /* Scan the loop, recording register usage.  */
  for (insn = loop->top ? loop->top : loop->start; insn != loop->end;
       insn = NEXT_INSN (insn))
    {
      if (INSN_P (insn))
	{
	  /* Record registers that have exactly one use.  */
	  find_single_use_in_loop (regs, insn, PATTERN (insn));

	  /* Include uses in REG_EQUAL notes.  */
	  if (REG_NOTES (insn))
	    find_single_use_in_loop (regs, insn, REG_NOTES (insn));

	  if (GET_CODE (PATTERN (insn)) == SET
	      || GET_CODE (PATTERN (insn)) == CLOBBER)
	    count_one_set (regs, insn, PATTERN (insn), last_set);
	  else if (GET_CODE (PATTERN (insn)) == PARALLEL)
	    {
	      int i;
	      for (i = XVECLEN (PATTERN (insn), 0) - 1; i >= 0; i--)
		count_one_set (regs, insn, XVECEXP (PATTERN (insn), 0, i),
			       last_set);
	    }
	}

      if (LABEL_P (insn) || JUMP_P (insn))
	memset (last_set, 0, regs->num * sizeof (rtx));

      /* Invalidate all registers used for function argument passing.
	 We check rtx_varies_p for the same reason as below, to allow
	 optimizing PIC calculations.  */
      if (CALL_P (insn))
	{
	  rtx link;
	  for (link = CALL_INSN_FUNCTION_USAGE (insn);
	       link;
	       link = XEXP (link, 1))
	    {
	      rtx op, reg;

	      if (GET_CODE (op = XEXP (link, 0)) == USE
		  && REG_P (reg = XEXP (op, 0))
		  && rtx_varies_p (reg, 1))
		regs->array[REGNO (reg)].may_not_optimize = 1;
	    }
	}
    }

  /* Invalidate all hard registers clobbered by calls.  With one exception:
     a call-clobbered PIC register is still function-invariant for our
     purposes, since we can hoist any PIC calculations out of the loop.
     Thus the call to rtx_varies_p.  */
  if (LOOP_INFO (loop)->has_call)
    for (i = 0; i < FIRST_PSEUDO_REGISTER; i++)
      if (TEST_HARD_REG_BIT (regs_invalidated_by_call, i)
	  && rtx_varies_p (regno_reg_rtx[i], 1))
	{
	  regs->array[i].may_not_optimize = 1;
	  regs->array[i].set_in_loop = 1;
	}

#ifdef AVOID_CCMODE_COPIES
  /* Don't try to move insns which set CC registers if we should not
     create CCmode register copies.  */
  for (i = regs->num - 1; i >= FIRST_PSEUDO_REGISTER; i--)
    if (GET_MODE_CLASS (GET_MODE (regno_reg_rtx[i])) == MODE_CC)
      regs->array[i].may_not_optimize = 1;
#endif

  /* Set regs->array[I].n_times_set for the new registers.  */
  for (i = old_nregs; i < regs->num; i++)
    regs->array[i].n_times_set = regs->array[i].set_in_loop;

  free (last_set);
}

/* Returns the number of real INSNs in the LOOP.  */

static int
count_insns_in_loop (const struct loop *loop)
{
  int count = 0;
  rtx insn;

  for (insn = loop->top ? loop->top : loop->start; insn != loop->end;
       insn = NEXT_INSN (insn))
    if (INSN_P (insn))
      ++count;

  return count;
}

/* Move MEMs into registers for the duration of the loop.  */

static void
load_mems (const struct loop *loop)
{
  struct loop_info *loop_info = LOOP_INFO (loop);
  struct loop_regs *regs = LOOP_REGS (loop);
  int maybe_never = 0;
  int i;
  rtx p, prev_ebb_head;
  rtx label = NULL_RTX;
  rtx end_label;
  /* Nonzero if the next instruction may never be executed.  */
  int next_maybe_never = 0;
  unsigned int last_max_reg = max_reg_num ();

  if (loop_info->mems_idx == 0)
    return;

  /* We cannot use next_label here because it skips over normal insns.  */
  end_label = next_nonnote_insn (loop->end);
  if (end_label && !LABEL_P (end_label))
    end_label = NULL_RTX;

  /* Check to see if it's possible that some instructions in the loop are
     never executed.  Also check if there is a goto out of the loop other
     than right after the end of the loop.  */
  for (p = next_insn_in_loop (loop, loop->scan_start);
       p != NULL_RTX;
       p = next_insn_in_loop (loop, p))
    {
      if (LABEL_P (p))
	maybe_never = 1;
      else if (JUMP_P (p)
	       /* If we enter the loop in the middle, and scan
		  around to the beginning, don't set maybe_never
		  for that.  This must be an unconditional jump,
		  otherwise the code at the top of the loop might
		  never be executed.  Unconditional jumps are
		  followed a by barrier then loop end.  */
	       && ! (JUMP_P (p)
		     && JUMP_LABEL (p) == loop->top
		     && NEXT_INSN (NEXT_INSN (p)) == loop->end
		     && any_uncondjump_p (p)))
	{
	  /* If this is a jump outside of the loop but not right
	     after the end of the loop, we would have to emit new fixup
	     sequences for each such label.  */
	  if (/* If we can't tell where control might go when this
		 JUMP_INSN is executed, we must be conservative.  */
	      !JUMP_LABEL (p)
	      || (JUMP_LABEL (p) != end_label
		  && (INSN_UID (JUMP_LABEL (p)) >= max_uid_for_loop
		      || INSN_LUID (JUMP_LABEL (p)) < INSN_LUID (loop->start)
		      || INSN_LUID (JUMP_LABEL (p)) > INSN_LUID (loop->end))))
	    return;

	  if (!any_condjump_p (p))
	    /* Something complicated.  */
	    maybe_never = 1;
	  else
	    /* If there are any more instructions in the loop, they
	       might not be reached.  */
	    next_maybe_never = 1;
	}
      else if (next_maybe_never)
	maybe_never = 1;
    }

  /* Find start of the extended basic block that enters the loop.  */
  for (p = loop->start;
       PREV_INSN (p) && !LABEL_P (p);
       p = PREV_INSN (p))
    ;
  prev_ebb_head = p;

  cselib_init (true);

  /* Build table of mems that get set to constant values before the
     loop.  */
  for (; p != loop->start; p = NEXT_INSN (p))
    cselib_process_insn (p);

  /* Actually move the MEMs.  */
  for (i = 0; i < loop_info->mems_idx; ++i)
    {
      regset_head load_copies;
      regset_head store_copies;
      int written = 0;
      rtx reg;
      rtx mem = loop_info->mems[i].mem;
      rtx mem_list_entry;

      if (MEM_VOLATILE_P (mem)
	  || loop_invariant_p (loop, XEXP (mem, 0)) != 1)
	/* There's no telling whether or not MEM is modified.  */
	loop_info->mems[i].optimize = 0;

      /* Go through the MEMs written to in the loop to see if this
	 one is aliased by one of them.  */
      mem_list_entry = loop_info->store_mems;
      while (mem_list_entry)
	{
	  if (rtx_equal_p (mem, XEXP (mem_list_entry, 0)))
	    written = 1;
	  else if (true_dependence (XEXP (mem_list_entry, 0), VOIDmode,
				    mem, rtx_varies_p))
	    {
	      /* MEM is indeed aliased by this store.  */
	      loop_info->mems[i].optimize = 0;
	      break;
	    }
	  mem_list_entry = XEXP (mem_list_entry, 1);
	}

      if (flag_float_store && written
	  && GET_MODE_CLASS (GET_MODE (mem)) == MODE_FLOAT)
	loop_info->mems[i].optimize = 0;

      /* If this MEM is written to, we must be sure that there
	 are no reads from another MEM that aliases this one.  */
      if (loop_info->mems[i].optimize && written)
	{
	  int j;

	  for (j = 0; j < loop_info->mems_idx; ++j)
	    {
	      if (j == i)
		continue;
	      else if (true_dependence (mem,
					VOIDmode,
					loop_info->mems[j].mem,
					rtx_varies_p))
		{
		  /* It's not safe to hoist loop_info->mems[i] out of
		     the loop because writes to it might not be
		     seen by reads from loop_info->mems[j].  */
		  loop_info->mems[i].optimize = 0;
		  break;
		}
	    }
	}

      if (maybe_never && may_trap_p (mem))
	/* We can't access the MEM outside the loop; it might
	   cause a trap that wouldn't have happened otherwise.  */
	loop_info->mems[i].optimize = 0;

      if (!loop_info->mems[i].optimize)
	/* We thought we were going to lift this MEM out of the
	   loop, but later discovered that we could not.  */
	continue;

      INIT_REG_SET (&load_copies);
      INIT_REG_SET (&store_copies);

      /* Allocate a pseudo for this MEM.  We set REG_USERVAR_P in
	 order to keep scan_loop from moving stores to this MEM
	 out of the loop just because this REG is neither a
	 user-variable nor used in the loop test.  */
      reg = gen_reg_rtx (GET_MODE (mem));
      REG_USERVAR_P (reg) = 1;
      loop_info->mems[i].reg = reg;

      /* Now, replace all references to the MEM with the
	 corresponding pseudos.  */
      maybe_never = 0;
      for (p = next_insn_in_loop (loop, loop->scan_start);
	   p != NULL_RTX;
	   p = next_insn_in_loop (loop, p))
	{
	  if (INSN_P (p))
	    {
	      rtx set;

	      set = single_set (p);

	      /* See if this copies the mem into a register that isn't
		 modified afterwards.  We'll try to do copy propagation
		 a little further on.  */
	      if (set
		  /* @@@ This test is _way_ too conservative.  */
		  && ! maybe_never
		  && REG_P (SET_DEST (set))
		  && REGNO (SET_DEST (set)) >= FIRST_PSEUDO_REGISTER
		  && REGNO (SET_DEST (set)) < last_max_reg
		  && regs->array[REGNO (SET_DEST (set))].n_times_set == 1
		  && rtx_equal_p (SET_SRC (set), mem))
		SET_REGNO_REG_SET (&load_copies, REGNO (SET_DEST (set)));

	      /* See if this copies the mem from a register that isn't
		 modified afterwards.  We'll try to remove the
		 redundant copy later on by doing a little register
		 renaming and copy propagation.   This will help
		 to untangle things for the BIV detection code.  */
	      if (set
		  && ! maybe_never
		  && REG_P (SET_SRC (set))
		  && REGNO (SET_SRC (set)) >= FIRST_PSEUDO_REGISTER
		  && REGNO (SET_SRC (set)) < last_max_reg
		  && regs->array[REGNO (SET_SRC (set))].n_times_set == 1
		  && rtx_equal_p (SET_DEST (set), mem))
		SET_REGNO_REG_SET (&store_copies, REGNO (SET_SRC (set)));

	      /* If this is a call which uses / clobbers this memory
		 location, we must not change the interface here.  */
	      if (CALL_P (p)
		  && reg_mentioned_p (loop_info->mems[i].mem,
				      CALL_INSN_FUNCTION_USAGE (p)))
		{
		  cancel_changes (0);
		  loop_info->mems[i].optimize = 0;
		  break;
		}
	      else
	        /* Replace the memory reference with the shadow register.  */
		replace_loop_mems (p, loop_info->mems[i].mem,
				   loop_info->mems[i].reg, written);
	    }

	  if (LABEL_P (p)
	      || JUMP_P (p))
	    maybe_never = 1;
	}

      if (! loop_info->mems[i].optimize)
	; /* We found we couldn't do the replacement, so do nothing.  */
      else if (! apply_change_group ())
	/* We couldn't replace all occurrences of the MEM.  */
	loop_info->mems[i].optimize = 0;
      else
	{
	  /* Load the memory immediately before LOOP->START, which is
	     the NOTE_LOOP_BEG.  */
	  cselib_val *e = cselib_lookup (mem, VOIDmode, 0);
	  rtx set;
	  rtx best = mem;
	  unsigned j;
	  struct elt_loc_list *const_equiv = 0;
	  reg_set_iterator rsi;

	  if (e)
	    {
	      struct elt_loc_list *equiv;
	      struct elt_loc_list *best_equiv = 0;
	      for (equiv = e->locs; equiv; equiv = equiv->next)
		{
		  if (CONSTANT_P (equiv->loc))
		    const_equiv = equiv;
		  else if (REG_P (equiv->loc)
			   /* Extending hard register lifetimes causes crash
			      on SRC targets.  Doing so on non-SRC is
			      probably also not good idea, since we most
			      probably have pseudoregister equivalence as
			      well.  */
			   && REGNO (equiv->loc) >= FIRST_PSEUDO_REGISTER)
		    best_equiv = equiv;
		}
	      /* Use the constant equivalence if that is cheap enough.  */
	      if (! best_equiv)
		best_equiv = const_equiv;
	      else if (const_equiv
		       && (rtx_cost (const_equiv->loc, SET)
			   <= rtx_cost (best_equiv->loc, SET)))
		{
		  best_equiv = const_equiv;
		  const_equiv = 0;
		}

	      /* If best_equiv is nonzero, we know that MEM is set to a
		 constant or register before the loop.  We will use this
		 knowledge to initialize the shadow register with that
		 constant or reg rather than by loading from MEM.  */
	      if (best_equiv)
		best = copy_rtx (best_equiv->loc);
	    }

	  set = gen_move_insn (reg, best);
	  set = loop_insn_hoist (loop, set);
	  if (REG_P (best))
	    {
	      for (p = prev_ebb_head; p != loop->start; p = NEXT_INSN (p))
		if (REGNO_LAST_UID (REGNO (best)) == INSN_UID (p))
		  {
		    REGNO_LAST_UID (REGNO (best)) = INSN_UID (set);
		    break;
		  }
	    }

	  if (const_equiv)
	    set_unique_reg_note (set, REG_EQUAL, copy_rtx (const_equiv->loc));

	  if (written)
	    {
	      if (label == NULL_RTX)
		{
		  label = gen_label_rtx ();
		  emit_label_after (label, loop->end);
		}

	      /* Store the memory immediately after END, which is
		 the NOTE_LOOP_END.  */
	      set = gen_move_insn (copy_rtx (mem), reg);
	      loop_insn_emit_after (loop, 0, label, set);
	    }

	  if (loop_dump_stream)
	    {
	      fprintf (loop_dump_stream, "Hoisted regno %d %s from ",
		       REGNO (reg), (written ? "r/w" : "r/o"));
	      print_rtl (loop_dump_stream, mem);
	      fputc ('\n', loop_dump_stream);
	    }

	  /* Attempt a bit of copy propagation.  This helps untangle the
	     data flow, and enables {basic,general}_induction_var to find
	     more bivs/givs.  */
	  EXECUTE_IF_SET_IN_REG_SET
	    (&load_copies, FIRST_PSEUDO_REGISTER, j, rsi)
	    {
	      try_copy_prop (loop, reg, j);
	    }
	  CLEAR_REG_SET (&load_copies);

	  EXECUTE_IF_SET_IN_REG_SET
	    (&store_copies, FIRST_PSEUDO_REGISTER, j, rsi)
	    {
	      try_swap_copy_prop (loop, reg, j);
	    }
	  CLEAR_REG_SET (&store_copies);
	}
    }

  /* Now, we need to replace all references to the previous exit
     label with the new one.  */
  if (label != NULL_RTX && end_label != NULL_RTX)
    for (p = loop->start; p != loop->end; p = NEXT_INSN (p))
      if (JUMP_P (p) && JUMP_LABEL (p) == end_label)
	redirect_jump (p, label, false);

  cselib_finish ();
}

/* For communication between note_reg_stored and its caller.  */
struct note_reg_stored_arg
{
  int set_seen;
  rtx reg;
};

/* Called via note_stores, record in SET_SEEN whether X, which is written,
   is equal to ARG.  */
static void
note_reg_stored (rtx x, rtx setter ATTRIBUTE_UNUSED, void *arg)
{
  struct note_reg_stored_arg *t = (struct note_reg_stored_arg *) arg;
  if (t->reg == x)
    t->set_seen = 1;
}

/* Try to replace every occurrence of pseudo REGNO with REPLACEMENT.
   There must be exactly one insn that sets this pseudo; it will be
   deleted if all replacements succeed and we can prove that the register
   is not used after the loop.  */

static void
try_copy_prop (const struct loop *loop, rtx replacement, unsigned int regno)
{
  /* This is the reg that we are copying from.  */
  rtx reg_rtx = regno_reg_rtx[regno];
  rtx init_insn = 0;
  rtx insn;
  /* These help keep track of whether we replaced all uses of the reg.  */
  int replaced_last = 0;
  int store_is_first = 0;

  for (insn = next_insn_in_loop (loop, loop->scan_start);
       insn != NULL_RTX;
       insn = next_insn_in_loop (loop, insn))
    {
      rtx set;

      /* Only substitute within one extended basic block from the initializing
         insn.  */
      if (LABEL_P (insn) && init_insn)
	break;

      if (! INSN_P (insn))
	continue;

      /* Is this the initializing insn?  */
      set = single_set (insn);
      if (set
	  && REG_P (SET_DEST (set))
	  && REGNO (SET_DEST (set)) == regno)
	{
	  if (init_insn)
	    abort ();

	  init_insn = insn;
	  if (REGNO_FIRST_UID (regno) == INSN_UID (insn))
	    store_is_first = 1;
	}

      /* Only substitute after seeing the initializing insn.  */
      if (init_insn && insn != init_insn)
	{
	  struct note_reg_stored_arg arg;

	  replace_loop_regs (insn, reg_rtx, replacement);
	  if (REGNO_LAST_UID (regno) == INSN_UID (insn))
	    replaced_last = 1;

	  /* Stop replacing when REPLACEMENT is modified.  */
	  arg.reg = replacement;
	  arg.set_seen = 0;
	  note_stores (PATTERN (insn), note_reg_stored, &arg);
	  if (arg.set_seen)
	    {
	      rtx note = find_reg_note (insn, REG_EQUAL, NULL);

	      /* It is possible that we've turned previously valid REG_EQUAL to
	         invalid, as we change the REGNO to REPLACEMENT and unlike REGNO,
	         REPLACEMENT is modified, we get different meaning.  */
	      if (note && reg_mentioned_p (replacement, XEXP (note, 0)))
		remove_note (insn, note);
	      break;
	    }
	}
    }
  if (! init_insn)
    abort ();
  if (apply_change_group ())
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream, "  Replaced reg %d", regno);
      if (store_is_first && replaced_last)
	{
	  rtx first;
	  rtx retval_note;

	  /* Assume we're just deleting INIT_INSN.  */
	  first = init_insn;
	  /* Look for REG_RETVAL note.  If we're deleting the end of
	     the libcall sequence, the whole sequence can go.  */
	  retval_note = find_reg_note (init_insn, REG_RETVAL, NULL_RTX);
	  /* If we found a REG_RETVAL note, find the first instruction
	     in the sequence.  */
	  if (retval_note)
	    first = XEXP (retval_note, 0);

	  /* Delete the instructions.  */
	  loop_delete_insns (first, init_insn);
	}
      if (loop_dump_stream)
	fprintf (loop_dump_stream, ".\n");
    }
}

/* Replace all the instructions from FIRST up to and including LAST
   with NOTE_INSN_DELETED notes.  */

static void
loop_delete_insns (rtx first, rtx last)
{
  while (1)
    {
      if (loop_dump_stream)
	fprintf (loop_dump_stream, ", deleting init_insn (%d)",
		 INSN_UID (first));
      delete_insn (first);

      /* If this was the LAST instructions we're supposed to delete,
	 we're done.  */
      if (first == last)
	break;

      first = NEXT_INSN (first);
    }
}

/* Try to replace occurrences of pseudo REGNO with REPLACEMENT within
   loop LOOP if the order of the sets of these registers can be
   swapped.  There must be exactly one insn within the loop that sets
   this pseudo followed immediately by a move insn that sets
   REPLACEMENT with REGNO.  */
static void
try_swap_copy_prop (const struct loop *loop, rtx replacement,
		    unsigned int regno)
{
  rtx insn;
  rtx set = NULL_RTX;
  unsigned int new_regno;

  new_regno = REGNO (replacement);

  for (insn = next_insn_in_loop (loop, loop->scan_start);
       insn != NULL_RTX;
       insn = next_insn_in_loop (loop, insn))
    {
      /* Search for the insn that copies REGNO to NEW_REGNO?  */
      if (INSN_P (insn)
	  && (set = single_set (insn))
	  && REG_P (SET_DEST (set))
	  && REGNO (SET_DEST (set)) == new_regno
	  && REG_P (SET_SRC (set))
	  && REGNO (SET_SRC (set)) == regno)
	break;
    }

  if (insn != NULL_RTX)
    {
      rtx prev_insn;
      rtx prev_set;

      /* Some DEF-USE info would come in handy here to make this
	 function more general.  For now, just check the previous insn
	 which is the most likely candidate for setting REGNO.  */

      prev_insn = PREV_INSN (insn);

      if (INSN_P (insn)
	  && (prev_set = single_set (prev_insn))
	  && REG_P (SET_DEST (prev_set))
	  && REGNO (SET_DEST (prev_set)) == regno)
	{
	  /* We have:
	     (set (reg regno) (expr))
	     (set (reg new_regno) (reg regno))

	     so try converting this to:
	     (set (reg new_regno) (expr))
	     (set (reg regno) (reg new_regno))

	     The former construct is often generated when a global
	     variable used for an induction variable is shadowed by a
	     register (NEW_REGNO).  The latter construct improves the
	     chances of GIV replacement and BIV elimination.  */

	  validate_change (prev_insn, &SET_DEST (prev_set),
			   replacement, 1);
	  validate_change (insn, &SET_DEST (set),
			   SET_SRC (set), 1);
	  validate_change (insn, &SET_SRC (set),
			   replacement, 1);

	  if (apply_change_group ())
	    {
	      if (loop_dump_stream)
		fprintf (loop_dump_stream,
			 "  Swapped set of reg %d at %d with reg %d at %d.\n",
			 regno, INSN_UID (insn),
			 new_regno, INSN_UID (prev_insn));

	      /* Update first use of REGNO.  */
	      if (REGNO_FIRST_UID (regno) == INSN_UID (prev_insn))
		REGNO_FIRST_UID (regno) = INSN_UID (insn);

	      /* Now perform copy propagation to hopefully
		 remove all uses of REGNO within the loop.  */
	      try_copy_prop (loop, replacement, regno);
	    }
	}
    }
}

/* Worker function for find_mem_in_note, called via for_each_rtx.  */

static int
find_mem_in_note_1 (rtx *x, void *data)
{
  if (*x != NULL_RTX && MEM_P (*x))
    {
      rtx *res = (rtx *) data;
      *res = *x;
      return 1;
    }
  return 0;
}

/* Returns the first MEM found in NOTE by depth-first search.  */

static rtx
find_mem_in_note (rtx note)
{
  if (note && for_each_rtx (&note, find_mem_in_note_1, &note))
    return note;
  return NULL_RTX;
}

/* Replace MEM with its associated pseudo register.  This function is
   called from load_mems via for_each_rtx.  DATA is actually a pointer
   to a structure describing the instruction currently being scanned
   and the MEM we are currently replacing.  */

static int
replace_loop_mem (rtx *mem, void *data)
{
  loop_replace_args *args = (loop_replace_args *) data;
  rtx m = *mem;

  if (m == NULL_RTX)
    return 0;

  switch (GET_CODE (m))
    {
    case MEM:
      break;

    case CONST_DOUBLE:
      /* We're not interested in the MEM associated with a
	 CONST_DOUBLE, so there's no need to traverse into one.  */
      return -1;

    default:
      /* This is not a MEM.  */
      return 0;
    }

  if (!rtx_equal_p (args->match, m))
    /* This is not the MEM we are currently replacing.  */
    return 0;

  /* Actually replace the MEM.  */
  validate_change (args->insn, mem, args->replacement, 1);

  return 0;
}

static void
replace_loop_mems (rtx insn, rtx mem, rtx reg, int written)
{
  loop_replace_args args;

  args.insn = insn;
  args.match = mem;
  args.replacement = reg;

  for_each_rtx (&insn, replace_loop_mem, &args);

  /* If we hoist a mem write out of the loop, then REG_EQUAL
     notes referring to the mem are no longer valid.  */
  if (written)
    {
      rtx note, sub;
      rtx *link;

      for (link = &REG_NOTES (insn); (note = *link); link = &XEXP (note, 1))
	{
	  if (REG_NOTE_KIND (note) == REG_EQUAL
	      && (sub = find_mem_in_note (note))
	      && true_dependence (mem, VOIDmode, sub, rtx_varies_p))
	    {
	      /* Remove the note.  */
	      validate_change (NULL_RTX, link, XEXP (note, 1), 1);
	      break;
	    }
	}
    }
}

/* Replace one register with another.  Called through for_each_rtx; PX points
   to the rtx being scanned.  DATA is actually a pointer to
   a structure of arguments.  */

static int
replace_loop_reg (rtx *px, void *data)
{
  rtx x = *px;
  loop_replace_args *args = (loop_replace_args *) data;

  if (x == NULL_RTX)
    return 0;

  if (x == args->match)
    validate_change (args->insn, px, args->replacement, 1);

  return 0;
}

static void
replace_loop_regs (rtx insn, rtx reg, rtx replacement)
{
  loop_replace_args args;

  args.insn = insn;
  args.match = reg;
  args.replacement = replacement;

  for_each_rtx (&insn, replace_loop_reg, &args);
}

/* Emit insn for PATTERN after WHERE_INSN in basic block WHERE_BB
   (ignored in the interim).  */

static rtx
loop_insn_emit_after (const struct loop *loop ATTRIBUTE_UNUSED,
		      basic_block where_bb ATTRIBUTE_UNUSED, rtx where_insn,
		      rtx pattern)
{
  return emit_insn_after (pattern, where_insn);
}


/* If WHERE_INSN is nonzero emit insn for PATTERN before WHERE_INSN
   in basic block WHERE_BB (ignored in the interim) within the loop
   otherwise hoist PATTERN into the loop pre-header.  */

static rtx
loop_insn_emit_before (const struct loop *loop,
		       basic_block where_bb ATTRIBUTE_UNUSED,
		       rtx where_insn, rtx pattern)
{
  if (! where_insn)
    return loop_insn_hoist (loop, pattern);
  return emit_insn_before (pattern, where_insn);
}


/* Emit call insn for PATTERN before WHERE_INSN in basic block
   WHERE_BB (ignored in the interim) within the loop.  */

static rtx
loop_call_insn_emit_before (const struct loop *loop ATTRIBUTE_UNUSED,
			    basic_block where_bb ATTRIBUTE_UNUSED,
			    rtx where_insn, rtx pattern)
{
  return emit_call_insn_before (pattern, where_insn);
}


/* Hoist insn for PATTERN into the loop pre-header.  */

static rtx
loop_insn_hoist (const struct loop *loop, rtx pattern)
{
  return loop_insn_emit_before (loop, 0, loop->start, pattern);
}


/* Hoist call insn for PATTERN into the loop pre-header.  */

static rtx
loop_call_insn_hoist (const struct loop *loop, rtx pattern)
{
  return loop_call_insn_emit_before (loop, 0, loop->start, pattern);
}


/* Sink insn for PATTERN after the loop end.  */

static rtx
loop_insn_sink (const struct loop *loop, rtx pattern)
{
  return loop_insn_emit_before (loop, 0, loop->sink, pattern);
}

/* bl->final_value can be either general_operand or PLUS of general_operand
   and constant.  Emit sequence of instructions to load it into REG.  */
static rtx
gen_load_of_final_value (rtx reg, rtx final_value)
{
  rtx seq;
  start_sequence ();
  final_value = force_operand (final_value, reg);
  if (final_value != reg)
    emit_move_insn (reg, final_value);
  seq = get_insns ();
  end_sequence ();
  return seq;
}

/* If the loop has multiple exits, emit insn for PATTERN before the
   loop to ensure that it will always be executed no matter how the
   loop exits.  Otherwise, emit the insn for PATTERN after the loop,
   since this is slightly more efficient.  */

static rtx
loop_insn_sink_or_swim (const struct loop *loop, rtx pattern)
{
  if (loop->exit_count)
    return loop_insn_hoist (loop, pattern);
  else
    return loop_insn_sink (loop, pattern);
}

static void
loop_ivs_dump (const struct loop *loop, FILE *file, int verbose)
{
  struct iv_class *bl;
  int iv_num = 0;

  if (! loop || ! file)
    return;

  for (bl = LOOP_IVS (loop)->list; bl; bl = bl->next)
    iv_num++;

  fprintf (file, "Loop %d: %d IV classes\n", loop->num, iv_num);

  for (bl = LOOP_IVS (loop)->list; bl; bl = bl->next)
    {
      loop_iv_class_dump (bl, file, verbose);
      fputc ('\n', file);
    }
}


static void
loop_iv_class_dump (const struct iv_class *bl, FILE *file,
		    int verbose ATTRIBUTE_UNUSED)
{
  struct induction *v;
  rtx incr;
  int i;

  if (! bl || ! file)
    return;

  fprintf (file, "IV class for reg %d, benefit %d\n",
	   bl->regno, bl->total_benefit);

  fprintf (file, " Init insn %d", INSN_UID (bl->init_insn));
  if (bl->initial_value)
    {
      fprintf (file, ", init val: ");
      print_simple_rtl (file, bl->initial_value);
    }
  if (bl->initial_test)
    {
      fprintf (file, ", init test: ");
      print_simple_rtl (file, bl->initial_test);
    }
  fputc ('\n', file);

  if (bl->final_value)
    {
      fprintf (file, " Final val: ");
      print_simple_rtl (file, bl->final_value);
      fputc ('\n', file);
    }

  if ((incr = biv_total_increment (bl)))
    {
      fprintf (file, " Total increment: ");
      print_simple_rtl (file, incr);
      fputc ('\n', file);
    }

  /* List the increments.  */
  for (i = 0, v = bl->biv; v; v = v->next_iv, i++)
    {
      fprintf (file, " Inc%d: insn %d, incr: ", i, INSN_UID (v->insn));
      print_simple_rtl (file, v->add_val);
      fputc ('\n', file);
    }

  /* List the givs.  */
  for (i = 0, v = bl->giv; v; v = v->next_iv, i++)
    {
      fprintf (file, " Giv%d: insn %d, benefit %d, ",
	       i, INSN_UID (v->insn), v->benefit);
      if (v->giv_type == DEST_ADDR)
	print_simple_rtl (file, v->mem);
      else
	print_simple_rtl (file, single_set (v->insn));
      fputc ('\n', file);
    }
}


static void
loop_biv_dump (const struct induction *v, FILE *file, int verbose)
{
  if (! v || ! file)
    return;

  fprintf (file,
	   "Biv %d: insn %d",
	   REGNO (v->dest_reg), INSN_UID (v->insn));
  fprintf (file, " const ");
  print_simple_rtl (file, v->add_val);

  if (verbose && v->final_value)
    {
      fputc ('\n', file);
      fprintf (file, " final ");
      print_simple_rtl (file, v->final_value);
    }

  fputc ('\n', file);
}


static void
loop_giv_dump (const struct induction *v, FILE *file, int verbose)
{
  if (! v || ! file)
    return;

  if (v->giv_type == DEST_REG)
    fprintf (file, "Giv %d: insn %d",
	     REGNO (v->dest_reg), INSN_UID (v->insn));
  else
    fprintf (file, "Dest address: insn %d",
	     INSN_UID (v->insn));

  fprintf (file, " src reg %d benefit %d",
	   REGNO (v->src_reg), v->benefit);
  fprintf (file, " lifetime %d",
	   v->lifetime);

  if (v->replaceable)
    fprintf (file, " replaceable");

  if (v->no_const_addval)
    fprintf (file, " ncav");

  if (v->ext_dependent)
    {
      switch (GET_CODE (v->ext_dependent))
	{
	case SIGN_EXTEND:
	  fprintf (file, " ext se");
	  break;
	case ZERO_EXTEND:
	  fprintf (file, " ext ze");
	  break;
	case TRUNCATE:
	  fprintf (file, " ext tr");
	  break;
	default:
	  abort ();
	}
    }

  fputc ('\n', file);
  fprintf (file, " mult ");
  print_simple_rtl (file, v->mult_val);

  fputc ('\n', file);
  fprintf (file, " add  ");
  print_simple_rtl (file, v->add_val);

  if (verbose && v->final_value)
    {
      fputc ('\n', file);
      fprintf (file, " final ");
      print_simple_rtl (file, v->final_value);
    }

  fputc ('\n', file);
}


void
debug_ivs (const struct loop *loop)
{
  loop_ivs_dump (loop, stderr, 1);
}


void
debug_iv_class (const struct iv_class *bl)
{
  loop_iv_class_dump (bl, stderr, 1);
}


void
debug_biv (const struct induction *v)
{
  loop_biv_dump (v, stderr, 1);
}


void
debug_giv (const struct induction *v)
{
  loop_giv_dump (v, stderr, 1);
}


#define LOOP_BLOCK_NUM_1(INSN) \
((INSN) ? (BLOCK_FOR_INSN (INSN) ? BLOCK_NUM (INSN) : - 1) : -1)

/* The notes do not have an assigned block, so look at the next insn.  */
#define LOOP_BLOCK_NUM(INSN) \
((INSN) ? (NOTE_P (INSN) \
            ? LOOP_BLOCK_NUM_1 (next_nonnote_insn (INSN)) \
            : LOOP_BLOCK_NUM_1 (INSN)) \
        : -1)

#define LOOP_INSN_UID(INSN) ((INSN) ? INSN_UID (INSN) : -1)

static void
loop_dump_aux (const struct loop *loop, FILE *file,
	       int verbose ATTRIBUTE_UNUSED)
{
  rtx label;

  if (! loop || ! file || !BB_HEAD (loop->first))
    return;

  /* Print diagnostics to compare our concept of a loop with
     what the loop notes say.  */
  if (! PREV_INSN (BB_HEAD (loop->first))
      || !NOTE_P (PREV_INSN (BB_HEAD (loop->first)))
      || NOTE_LINE_NUMBER (PREV_INSN (BB_HEAD (loop->first)))
      != NOTE_INSN_LOOP_BEG)
    fprintf (file, ";;  No NOTE_INSN_LOOP_BEG at %d\n",
	     INSN_UID (PREV_INSN (BB_HEAD (loop->first))));
  if (! NEXT_INSN (BB_END (loop->last))
      || !NOTE_P (NEXT_INSN (BB_END (loop->last)))
      || NOTE_LINE_NUMBER (NEXT_INSN (BB_END (loop->last)))
      != NOTE_INSN_LOOP_END)
    fprintf (file, ";;  No NOTE_INSN_LOOP_END at %d\n",
	     INSN_UID (NEXT_INSN (BB_END (loop->last))));

  if (loop->start)
    {
      fprintf (file,
	       ";;  start %d (%d), end %d (%d)\n",
	       LOOP_BLOCK_NUM (loop->start),
	       LOOP_INSN_UID (loop->start),
	       LOOP_BLOCK_NUM (loop->end),
	       LOOP_INSN_UID (loop->end));
      fprintf (file, ";;  top %d (%d), scan start %d (%d)\n",
	       LOOP_BLOCK_NUM (loop->top),
	       LOOP_INSN_UID (loop->top),
	       LOOP_BLOCK_NUM (loop->scan_start),
	       LOOP_INSN_UID (loop->scan_start));
      fprintf (file, ";;  exit_count %d", loop->exit_count);
      if (loop->exit_count)
	{
	  fputs (", labels:", file);
	  for (label = loop->exit_labels; label; label = LABEL_NEXTREF (label))
	    {
	      fprintf (file, " %d ",
		       LOOP_INSN_UID (XEXP (label, 0)));
	    }
	}
      fputs ("\n", file);
    }
}

/* Call this function from the debugger to dump LOOP.  */

void
debug_loop (const struct loop *loop)
{
  flow_loop_dump (loop, stderr, loop_dump_aux, 1);
}

/* Call this function from the debugger to dump LOOPS.  */

void
debug_loops (const struct loops *loops)
{
  flow_loops_dump (loops, stderr, loop_dump_aux, 1);
}