blob: 1c1b459d34fb7b33987d4b4067286e4dd833c095 [file] [log] [blame]
/* Swing Modulo Scheduling implementation.
Copyright (C) 2004-2021 Free Software Foundation, Inc.
Contributed by Ayal Zaks and Mustafa Hagog <zaks,mustafa@il.ibm.com>
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3, or (at your option) any later
version.
GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3. If not see
<http://www.gnu.org/licenses/>. */
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "backend.h"
#include "target.h"
#include "rtl.h"
#include "tree.h"
#include "cfghooks.h"
#include "df.h"
#include "memmodel.h"
#include "optabs.h"
#include "regs.h"
#include "emit-rtl.h"
#include "gcov-io.h"
#include "profile.h"
#include "insn-attr.h"
#include "cfgrtl.h"
#include "sched-int.h"
#include "cfgloop.h"
#include "expr.h"
#include "ddg.h"
#include "tree-pass.h"
#include "dbgcnt.h"
#include "loop-unroll.h"
#include "hard-reg-set.h"
#ifdef INSN_SCHEDULING
/* This file contains the implementation of the Swing Modulo Scheduler,
described in the following references:
[1] J. Llosa, A. Gonzalez, E. Ayguade, M. Valero., and J. Eckhardt.
Lifetime--sensitive modulo scheduling in a production environment.
IEEE Trans. on Comps., 50(3), March 2001
[2] J. Llosa, A. Gonzalez, E. Ayguade, and M. Valero.
Swing Modulo Scheduling: A Lifetime Sensitive Approach.
PACT '96 , pages 80-87, October 1996 (Boston - Massachusetts - USA).
The basic structure is:
1. Build a data-dependence graph (DDG) for each loop.
2. Use the DDG to order the insns of a loop (not in topological order
necessarily, but rather) trying to place each insn after all its
predecessors _or_ after all its successors.
3. Compute MII: a lower bound on the number of cycles to schedule the loop.
4. Use the ordering to perform list-scheduling of the loop:
1. Set II = MII. We will try to schedule the loop within II cycles.
2. Try to schedule the insns one by one according to the ordering.
For each insn compute an interval of cycles by considering already-
scheduled preds and succs (and associated latencies); try to place
the insn in the cycles of this window checking for potential
resource conflicts (using the DFA interface).
Note: this is different from the cycle-scheduling of schedule_insns;
here the insns are not scheduled monotonically top-down (nor bottom-
up).
3. If failed in scheduling all insns - bump II++ and try again, unless
II reaches an upper bound MaxII, in which case report failure.
5. If we succeeded in scheduling the loop within II cycles, we now
generate prolog and epilog, decrease the counter of the loop, and
perform modulo variable expansion for live ranges that span more than
II cycles (i.e. use register copies to prevent a def from overwriting
itself before reaching the use).
SMS works with countable loops (1) whose control part can be easily
decoupled from the rest of the loop and (2) whose loop count can
be easily adjusted. This is because we peel a constant number of
iterations into a prologue and epilogue for which we want to avoid
emitting the control part, and a kernel which is to iterate that
constant number of iterations less than the original loop. So the
control part should be a set of insns clearly identified and having
its own iv, not otherwise used in the loop (at-least for now), which
initializes a register before the loop to the number of iterations.
Currently SMS relies on the do-loop pattern to recognize such loops,
where (1) the control part comprises of all insns defining and/or
using a certain 'count' register and (2) the loop count can be
adjusted by modifying this register prior to the loop.
TODO: Rely on cfgloop analysis instead. */
/* This page defines partial-schedule structures and functions for
modulo scheduling. */
typedef struct partial_schedule *partial_schedule_ptr;
typedef struct ps_insn *ps_insn_ptr;
/* The minimum (absolute) cycle that a node of ps was scheduled in. */
#define PS_MIN_CYCLE(ps) (((partial_schedule_ptr)(ps))->min_cycle)
/* The maximum (absolute) cycle that a node of ps was scheduled in. */
#define PS_MAX_CYCLE(ps) (((partial_schedule_ptr)(ps))->max_cycle)
/* Perform signed modulo, always returning a non-negative value. */
#define SMODULO(x,y) ((x) % (y) < 0 ? ((x) % (y) + (y)) : (x) % (y))
/* The number of different iterations the nodes in ps span, assuming
the stage boundaries are placed efficiently. */
#define CALC_STAGE_COUNT(max_cycle,min_cycle,ii) ((max_cycle - min_cycle \
+ 1 + ii - 1) / ii)
/* The stage count of ps. */
#define PS_STAGE_COUNT(ps) (((partial_schedule_ptr)(ps))->stage_count)
/* A single instruction in the partial schedule. */
struct ps_insn
{
/* Identifies the instruction to be scheduled. Values smaller than
the ddg's num_nodes refer directly to ddg nodes. A value of
X - num_nodes refers to register move X. */
int id;
/* The (absolute) cycle in which the PS instruction is scheduled.
Same as SCHED_TIME (node). */
int cycle;
/* The next/prev PS_INSN in the same row. */
ps_insn_ptr next_in_row,
prev_in_row;
};
/* Information about a register move that has been added to a partial
schedule. */
struct ps_reg_move_info
{
/* The source of the move is defined by the ps_insn with id DEF.
The destination is used by the ps_insns with the ids in USES. */
int def;
sbitmap uses;
/* The original form of USES' instructions used OLD_REG, but they
should now use NEW_REG. */
rtx old_reg;
rtx new_reg;
/* The number of consecutive stages that the move occupies. */
int num_consecutive_stages;
/* An instruction that sets NEW_REG to the correct value. The first
move associated with DEF will have an rhs of OLD_REG; later moves
use the result of the previous move. */
rtx_insn *insn;
};
/* Holds the partial schedule as an array of II rows. Each entry of the
array points to a linked list of PS_INSNs, which represents the
instructions that are scheduled for that row. */
struct partial_schedule
{
int ii; /* Number of rows in the partial schedule. */
int history; /* Threshold for conflict checking using DFA. */
/* rows[i] points to linked list of insns scheduled in row i (0<=i<ii). */
ps_insn_ptr *rows;
/* All the moves added for this partial schedule. Index X has
a ps_insn id of X + g->num_nodes. */
vec<ps_reg_move_info> reg_moves;
/* rows_length[i] holds the number of instructions in the row.
It is used only (as an optimization) to back off quickly from
trying to schedule a node in a full row; that is, to avoid running
through futile DFA state transitions. */
int *rows_length;
/* The earliest absolute cycle of an insn in the partial schedule. */
int min_cycle;
/* The latest absolute cycle of an insn in the partial schedule. */
int max_cycle;
ddg_ptr g; /* The DDG of the insns in the partial schedule. */
int stage_count; /* The stage count of the partial schedule. */
};
static partial_schedule_ptr create_partial_schedule (int ii, ddg_ptr, int history);
static void free_partial_schedule (partial_schedule_ptr);
static void reset_partial_schedule (partial_schedule_ptr, int new_ii);
void print_partial_schedule (partial_schedule_ptr, FILE *);
static void verify_partial_schedule (partial_schedule_ptr, sbitmap);
static ps_insn_ptr ps_add_node_check_conflicts (partial_schedule_ptr,
int, int, sbitmap, sbitmap);
static void rotate_partial_schedule (partial_schedule_ptr, int);
void set_row_column_for_ps (partial_schedule_ptr);
static void ps_insert_empty_row (partial_schedule_ptr, int, sbitmap);
static int compute_split_row (sbitmap, int, int, int, ddg_node_ptr);
/* This page defines constants and structures for the modulo scheduling
driver. */
static int sms_order_nodes (ddg_ptr, int, int *, int *);
static void set_node_sched_params (ddg_ptr);
static partial_schedule_ptr sms_schedule_by_order (ddg_ptr, int, int, int *);
static void permute_partial_schedule (partial_schedule_ptr, rtx_insn *);
static int calculate_stage_count (partial_schedule_ptr, int);
static void calculate_must_precede_follow (ddg_node_ptr, int, int,
int, int, sbitmap, sbitmap, sbitmap);
static int get_sched_window (partial_schedule_ptr, ddg_node_ptr,
sbitmap, int, int *, int *, int *);
static bool try_scheduling_node_in_cycle (partial_schedule_ptr, int, int,
sbitmap, int *, sbitmap, sbitmap);
static void remove_node_from_ps (partial_schedule_ptr, ps_insn_ptr);
#define NODE_ASAP(node) ((node)->aux.count)
#define SCHED_PARAMS(x) (&node_sched_param_vec[x])
#define SCHED_TIME(x) (SCHED_PARAMS (x)->time)
#define SCHED_ROW(x) (SCHED_PARAMS (x)->row)
#define SCHED_STAGE(x) (SCHED_PARAMS (x)->stage)
#define SCHED_COLUMN(x) (SCHED_PARAMS (x)->column)
/* The scheduling parameters held for each node. */
typedef struct node_sched_params
{
int time; /* The absolute scheduling cycle. */
int row; /* Holds time % ii. */
int stage; /* Holds time / ii. */
/* The column of a node inside the ps. If nodes u, v are on the same row,
u will precede v if column (u) < column (v). */
int column;
} *node_sched_params_ptr;
/* The following three functions are copied from the current scheduler
code in order to use sched_analyze() for computing the dependencies.
They are used when initializing the sched_info structure. */
static const char *
sms_print_insn (const rtx_insn *insn, int aligned ATTRIBUTE_UNUSED)
{
static char tmp[80];
sprintf (tmp, "i%4d", INSN_UID (insn));
return tmp;
}
static void
compute_jump_reg_dependencies (rtx insn ATTRIBUTE_UNUSED,
regset used ATTRIBUTE_UNUSED)
{
}
static struct common_sched_info_def sms_common_sched_info;
static struct sched_deps_info_def sms_sched_deps_info =
{
compute_jump_reg_dependencies,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL,
0, 0, 0
};
static struct haifa_sched_info sms_sched_info =
{
NULL,
NULL,
NULL,
NULL,
NULL,
sms_print_insn,
NULL,
NULL, /* insn_finishes_block_p */
NULL, NULL,
NULL, NULL,
0, 0,
NULL, NULL, NULL, NULL,
NULL, NULL,
0
};
/* Partial schedule instruction ID in PS is a register move. Return
information about it. */
static struct ps_reg_move_info *
ps_reg_move (partial_schedule_ptr ps, int id)
{
gcc_checking_assert (id >= ps->g->num_nodes);
return &ps->reg_moves[id - ps->g->num_nodes];
}
/* Return the rtl instruction that is being scheduled by partial schedule
instruction ID, which belongs to schedule PS. */
static rtx_insn *
ps_rtl_insn (partial_schedule_ptr ps, int id)
{
if (id < ps->g->num_nodes)
return ps->g->nodes[id].insn;
else
return ps_reg_move (ps, id)->insn;
}
/* Partial schedule instruction ID, which belongs to PS, occurred in
the original (unscheduled) loop. Return the first instruction
in the loop that was associated with ps_rtl_insn (PS, ID).
If the instruction had some notes before it, this is the first
of those notes. */
static rtx_insn *
ps_first_note (partial_schedule_ptr ps, int id)
{
gcc_assert (id < ps->g->num_nodes);
return ps->g->nodes[id].first_note;
}
/* Return the number of consecutive stages that are occupied by
partial schedule instruction ID in PS. */
static int
ps_num_consecutive_stages (partial_schedule_ptr ps, int id)
{
if (id < ps->g->num_nodes)
return 1;
else
return ps_reg_move (ps, id)->num_consecutive_stages;
}
/* Given HEAD and TAIL which are the first and last insns in a loop;
return the register which controls the loop. Return zero if it has
more than one occurrence in the loop besides the control part or the
do-loop pattern is not of the form we expect. */
static rtx
doloop_register_get (rtx_insn *head, rtx_insn *tail)
{
rtx reg, condition;
rtx_insn *insn, *first_insn_not_to_check;
if (!JUMP_P (tail))
return NULL_RTX;
if (!targetm.code_for_doloop_end)
return NULL_RTX;
/* TODO: Free SMS's dependence on doloop_condition_get. */
condition = doloop_condition_get (tail);
if (! condition)
return NULL_RTX;
if (REG_P (XEXP (condition, 0)))
reg = XEXP (condition, 0);
else if (GET_CODE (XEXP (condition, 0)) == PLUS
&& REG_P (XEXP (XEXP (condition, 0), 0)))
reg = XEXP (XEXP (condition, 0), 0);
else
gcc_unreachable ();
/* Check that the COUNT_REG has no other occurrences in the loop
until the decrement. We assume the control part consists of
either a single (parallel) branch-on-count or a (non-parallel)
branch immediately preceded by a single (decrement) insn. */
first_insn_not_to_check = (GET_CODE (PATTERN (tail)) == PARALLEL ? tail
: prev_nondebug_insn (tail));
for (insn = head; insn != first_insn_not_to_check; insn = NEXT_INSN (insn))
if (NONDEBUG_INSN_P (insn) && reg_mentioned_p (reg, insn))
{
if (dump_file)
{
fprintf (dump_file, "SMS count_reg found ");
print_rtl_single (dump_file, reg);
fprintf (dump_file, " outside control in insn:\n");
print_rtl_single (dump_file, insn);
}
return NULL_RTX;
}
return reg;
}
/* Check if COUNT_REG is set to a constant in the PRE_HEADER block, so
that the number of iterations is a compile-time constant. If so,
return the rtx_insn that sets COUNT_REG to a constant, and set COUNT to
this constant. Otherwise return 0. */
static rtx_insn *
const_iteration_count (rtx count_reg, basic_block pre_header,
int64_t *count, bool* adjust_inplace)
{
rtx_insn *insn;
rtx_insn *head, *tail;
*adjust_inplace = false;
bool read_after = false;
if (! pre_header)
return NULL;
get_ebb_head_tail (pre_header, pre_header, &head, &tail);
for (insn = tail; insn != PREV_INSN (head); insn = PREV_INSN (insn))
if (single_set (insn) && rtx_equal_p (count_reg,
SET_DEST (single_set (insn))))
{
rtx pat = single_set (insn);
if (CONST_INT_P (SET_SRC (pat)))
{
*count = INTVAL (SET_SRC (pat));
*adjust_inplace = !read_after;
return insn;
}
return NULL;
}
else if (NONDEBUG_INSN_P (insn) && reg_mentioned_p (count_reg, insn))
{
read_after = true;
if (reg_set_p (count_reg, insn))
break;
}
return NULL;
}
/* A very simple resource-based lower bound on the initiation interval.
??? Improve the accuracy of this bound by considering the
utilization of various units. */
static int
res_MII (ddg_ptr g)
{
if (targetm.sched.sms_res_mii)
return targetm.sched.sms_res_mii (g);
return g->num_nodes / issue_rate;
}
/* A vector that contains the sched data for each ps_insn. */
static vec<node_sched_params> node_sched_param_vec;
/* Allocate sched_params for each node and initialize it. */
static void
set_node_sched_params (ddg_ptr g)
{
node_sched_param_vec.truncate (0);
node_sched_param_vec.safe_grow_cleared (g->num_nodes, true);
}
/* Make sure that node_sched_param_vec has an entry for every move in PS. */
static void
extend_node_sched_params (partial_schedule_ptr ps)
{
node_sched_param_vec.safe_grow_cleared (ps->g->num_nodes
+ ps->reg_moves.length (), true);
}
/* Update the sched_params (time, row and stage) for node U using the II,
the CYCLE of U and MIN_CYCLE.
We're not simply taking the following
SCHED_STAGE (u) = CALC_STAGE_COUNT (SCHED_TIME (u), min_cycle, ii);
because the stages may not be aligned on cycle 0. */
static void
update_node_sched_params (int u, int ii, int cycle, int min_cycle)
{
int sc_until_cycle_zero;
int stage;
SCHED_TIME (u) = cycle;
SCHED_ROW (u) = SMODULO (cycle, ii);
/* The calculation of stage count is done adding the number
of stages before cycle zero and after cycle zero. */
sc_until_cycle_zero = CALC_STAGE_COUNT (-1, min_cycle, ii);
if (SCHED_TIME (u) < 0)
{
stage = CALC_STAGE_COUNT (-1, SCHED_TIME (u), ii);
SCHED_STAGE (u) = sc_until_cycle_zero - stage;
}
else
{
stage = CALC_STAGE_COUNT (SCHED_TIME (u), 0, ii);
SCHED_STAGE (u) = sc_until_cycle_zero + stage - 1;
}
}
static void
print_node_sched_params (FILE *file, int num_nodes, partial_schedule_ptr ps)
{
int i;
if (! file)
return;
for (i = 0; i < num_nodes; i++)
{
node_sched_params_ptr nsp = SCHED_PARAMS (i);
fprintf (file, "Node = %d; INSN = %d\n", i,
INSN_UID (ps_rtl_insn (ps, i)));
fprintf (file, " asap = %d:\n", NODE_ASAP (&ps->g->nodes[i]));
fprintf (file, " time = %d:\n", nsp->time);
fprintf (file, " stage = %d:\n", nsp->stage);
}
}
/* Set SCHED_COLUMN for each instruction in row ROW of PS. */
static void
set_columns_for_row (partial_schedule_ptr ps, int row)
{
ps_insn_ptr cur_insn;
int column;
column = 0;
for (cur_insn = ps->rows[row]; cur_insn; cur_insn = cur_insn->next_in_row)
SCHED_COLUMN (cur_insn->id) = column++;
}
/* Set SCHED_COLUMN for each instruction in PS. */
static void
set_columns_for_ps (partial_schedule_ptr ps)
{
int row;
for (row = 0; row < ps->ii; row++)
set_columns_for_row (ps, row);
}
/* Try to schedule the move with ps_insn identifier I_REG_MOVE in PS.
Its single predecessor has already been scheduled, as has its
ddg node successors. (The move may have also another move as its
successor, in which case that successor will be scheduled later.)
The move is part of a chain that satisfies register dependencies
between a producing ddg node and various consuming ddg nodes.
If some of these dependencies have a distance of 1 (meaning that
the use is upward-exposed) then DISTANCE1_USES is nonnull and
contains the set of uses with distance-1 dependencies.
DISTANCE1_USES is null otherwise.
MUST_FOLLOW is a scratch bitmap that is big enough to hold
all current ps_insn ids.
Return true on success. */
static bool
schedule_reg_move (partial_schedule_ptr ps, int i_reg_move,
sbitmap distance1_uses, sbitmap must_follow)
{
unsigned int u;
int this_time, this_distance, this_start, this_end, this_latency;
int start, end, c, ii;
sbitmap_iterator sbi;
ps_reg_move_info *move;
rtx_insn *this_insn;
ps_insn_ptr psi;
move = ps_reg_move (ps, i_reg_move);
ii = ps->ii;
if (dump_file)
{
fprintf (dump_file, "Scheduling register move INSN %d; ii = %d"
", min cycle = %d\n\n", INSN_UID (move->insn), ii,
PS_MIN_CYCLE (ps));
print_rtl_single (dump_file, move->insn);
fprintf (dump_file, "\n%11s %11s %5s\n", "start", "end", "time");
fprintf (dump_file, "=========== =========== =====\n");
}
start = INT_MIN;
end = INT_MAX;
/* For dependencies of distance 1 between a producer ddg node A
and consumer ddg node B, we have a chain of dependencies:
A --(T,L1,1)--> M1 --(T,L2,0)--> M2 ... --(T,Ln,0)--> B
where Mi is the ith move. For dependencies of distance 0 between
a producer ddg node A and consumer ddg node C, we have a chain of
dependencies:
A --(T,L1',0)--> M1' --(T,L2',0)--> M2' ... --(T,Ln',0)--> C
where Mi' occupies the same position as Mi but occurs a stage later.
We can only schedule each move once, so if we have both types of
chain, we model the second as:
A --(T,L1',1)--> M1 --(T,L2',0)--> M2 ... --(T,Ln',-1)--> C
First handle the dependencies between the previously-scheduled
predecessor and the move. */
this_insn = ps_rtl_insn (ps, move->def);
this_latency = insn_latency (this_insn, move->insn);
this_distance = distance1_uses && move->def < ps->g->num_nodes ? 1 : 0;
this_time = SCHED_TIME (move->def) - this_distance * ii;
this_start = this_time + this_latency;
this_end = this_time + ii;
if (dump_file)
fprintf (dump_file, "%11d %11d %5d %d --(T,%d,%d)--> %d\n",
this_start, this_end, SCHED_TIME (move->def),
INSN_UID (this_insn), this_latency, this_distance,
INSN_UID (move->insn));
if (start < this_start)
start = this_start;
if (end > this_end)
end = this_end;
/* Handle the dependencies between the move and previously-scheduled
successors. */
EXECUTE_IF_SET_IN_BITMAP (move->uses, 0, u, sbi)
{
this_insn = ps_rtl_insn (ps, u);
this_latency = insn_latency (move->insn, this_insn);
if (distance1_uses && !bitmap_bit_p (distance1_uses, u))
this_distance = -1;
else
this_distance = 0;
this_time = SCHED_TIME (u) + this_distance * ii;
this_start = this_time - ii;
this_end = this_time - this_latency;
if (dump_file)
fprintf (dump_file, "%11d %11d %5d %d --(T,%d,%d)--> %d\n",
this_start, this_end, SCHED_TIME (u), INSN_UID (move->insn),
this_latency, this_distance, INSN_UID (this_insn));
if (start < this_start)
start = this_start;
if (end > this_end)
end = this_end;
}
if (dump_file)
{
fprintf (dump_file, "----------- ----------- -----\n");
fprintf (dump_file, "%11d %11d %5s %s\n", start, end, "", "(max, min)");
}
bitmap_clear (must_follow);
bitmap_set_bit (must_follow, move->def);
start = MAX (start, end - (ii - 1));
for (c = end; c >= start; c--)
{
psi = ps_add_node_check_conflicts (ps, i_reg_move, c,
move->uses, must_follow);
if (psi)
{
update_node_sched_params (i_reg_move, ii, c, PS_MIN_CYCLE (ps));
if (dump_file)
fprintf (dump_file, "\nScheduled register move INSN %d at"
" time %d, row %d\n\n", INSN_UID (move->insn), c,
SCHED_ROW (i_reg_move));
return true;
}
}
if (dump_file)
fprintf (dump_file, "\nNo available slot\n\n");
return false;
}
/*
Breaking intra-loop register anti-dependences:
Each intra-loop register anti-dependence implies a cross-iteration true
dependence of distance 1. Therefore, we can remove such false dependencies
and figure out if the partial schedule broke them by checking if (for a
true-dependence of distance 1): SCHED_TIME (def) < SCHED_TIME (use) and
if so generate a register move. The number of such moves is equal to:
SCHED_TIME (use) - SCHED_TIME (def) { 0 broken
nreg_moves = ----------------------------------- + 1 - { dependence.
ii { 1 if not.
*/
static bool
schedule_reg_moves (partial_schedule_ptr ps)
{
ddg_ptr g = ps->g;
int ii = ps->ii;
int i;
for (i = 0; i < g->num_nodes; i++)
{
ddg_node_ptr u = &g->nodes[i];
ddg_edge_ptr e;
int nreg_moves = 0, i_reg_move;
rtx prev_reg, old_reg;
int first_move;
int distances[2];
sbitmap distance1_uses;
rtx set = single_set (u->insn);
/* Skip instructions that do not set a register. */
if (set && !REG_P (SET_DEST (set)))
continue;
/* Compute the number of reg_moves needed for u, by looking at life
ranges started at u (excluding self-loops). */
distances[0] = distances[1] = false;
for (e = u->out; e; e = e->next_out)
if (e->type == TRUE_DEP && e->dest != e->src)
{
int nreg_moves4e = (SCHED_TIME (e->dest->cuid)
- SCHED_TIME (e->src->cuid)) / ii;
if (e->distance == 1)
nreg_moves4e = (SCHED_TIME (e->dest->cuid)
- SCHED_TIME (e->src->cuid) + ii) / ii;
/* If dest precedes src in the schedule of the kernel, then dest
will read before src writes and we can save one reg_copy. */
if (SCHED_ROW (e->dest->cuid) == SCHED_ROW (e->src->cuid)
&& SCHED_COLUMN (e->dest->cuid) < SCHED_COLUMN (e->src->cuid))
nreg_moves4e--;
if (nreg_moves4e >= 1)
{
/* !single_set instructions are not supported yet and
thus we do not except to encounter them in the loop
except from the doloop part. For the latter case
we assume no regmoves are generated as the doloop
instructions are tied to the branch with an edge. */
gcc_assert (set);
/* If the instruction contains auto-inc register then
validate that the regmov is being generated for the
target regsiter rather then the inc'ed register. */
gcc_assert (!autoinc_var_is_used_p (u->insn, e->dest->insn));
}
if (nreg_moves4e)
{
gcc_assert (e->distance < 2);
distances[e->distance] = true;
}
nreg_moves = MAX (nreg_moves, nreg_moves4e);
}
if (nreg_moves == 0)
continue;
/* Create NREG_MOVES register moves. */
first_move = ps->reg_moves.length ();
ps->reg_moves.safe_grow_cleared (first_move + nreg_moves, true);
extend_node_sched_params (ps);
/* Record the moves associated with this node. */
first_move += ps->g->num_nodes;
/* Generate each move. */
old_reg = prev_reg = SET_DEST (set);
if (HARD_REGISTER_P (old_reg))
return false;
for (i_reg_move = 0; i_reg_move < nreg_moves; i_reg_move++)
{
ps_reg_move_info *move = ps_reg_move (ps, first_move + i_reg_move);
move->def = i_reg_move > 0 ? first_move + i_reg_move - 1 : i;
move->uses = sbitmap_alloc (first_move + nreg_moves);
move->old_reg = old_reg;
move->new_reg = gen_reg_rtx (GET_MODE (prev_reg));
move->num_consecutive_stages = distances[0] && distances[1] ? 2 : 1;
move->insn = gen_move_insn (move->new_reg, copy_rtx (prev_reg));
bitmap_clear (move->uses);
prev_reg = move->new_reg;
}
distance1_uses = distances[1] ? sbitmap_alloc (g->num_nodes) : NULL;
if (distance1_uses)
bitmap_clear (distance1_uses);
/* Every use of the register defined by node may require a different
copy of this register, depending on the time the use is scheduled.
Record which uses require which move results. */
for (e = u->out; e; e = e->next_out)
if (e->type == TRUE_DEP && e->dest != e->src)
{
int dest_copy = (SCHED_TIME (e->dest->cuid)
- SCHED_TIME (e->src->cuid)) / ii;
if (e->distance == 1)
dest_copy = (SCHED_TIME (e->dest->cuid)
- SCHED_TIME (e->src->cuid) + ii) / ii;
if (SCHED_ROW (e->dest->cuid) == SCHED_ROW (e->src->cuid)
&& SCHED_COLUMN (e->dest->cuid) < SCHED_COLUMN (e->src->cuid))
dest_copy--;
if (dest_copy)
{
ps_reg_move_info *move;
move = ps_reg_move (ps, first_move + dest_copy - 1);
bitmap_set_bit (move->uses, e->dest->cuid);
if (e->distance == 1)
bitmap_set_bit (distance1_uses, e->dest->cuid);
}
}
auto_sbitmap must_follow (first_move + nreg_moves);
for (i_reg_move = 0; i_reg_move < nreg_moves; i_reg_move++)
if (!schedule_reg_move (ps, first_move + i_reg_move,
distance1_uses, must_follow))
break;
if (distance1_uses)
sbitmap_free (distance1_uses);
if (i_reg_move < nreg_moves)
return false;
}
return true;
}
/* Emit the moves associated with PS. Apply the substitutions
associated with them. */
static void
apply_reg_moves (partial_schedule_ptr ps)
{
ps_reg_move_info *move;
int i;
FOR_EACH_VEC_ELT (ps->reg_moves, i, move)
{
unsigned int i_use;
sbitmap_iterator sbi;
EXECUTE_IF_SET_IN_BITMAP (move->uses, 0, i_use, sbi)
{
replace_rtx (ps->g->nodes[i_use].insn, move->old_reg, move->new_reg);
df_insn_rescan (ps->g->nodes[i_use].insn);
}
}
}
/* Bump the SCHED_TIMEs of all nodes by AMOUNT. Set the values of
SCHED_ROW and SCHED_STAGE. Instruction scheduled on cycle AMOUNT
will move to cycle zero. */
static void
reset_sched_times (partial_schedule_ptr ps, int amount)
{
int row;
int ii = ps->ii;
ps_insn_ptr crr_insn;
for (row = 0; row < ii; row++)
for (crr_insn = ps->rows[row]; crr_insn; crr_insn = crr_insn->next_in_row)
{
int u = crr_insn->id;
int normalized_time = SCHED_TIME (u) - amount;
int new_min_cycle = PS_MIN_CYCLE (ps) - amount;
if (dump_file)
{
/* Print the scheduling times after the rotation. */
rtx_insn *insn = ps_rtl_insn (ps, u);
fprintf (dump_file, "crr_insn->node=%d (insn id %d), "
"crr_insn->cycle=%d, min_cycle=%d", u,
INSN_UID (insn), normalized_time, new_min_cycle);
if (JUMP_P (insn))
fprintf (dump_file, " (branch)");
fprintf (dump_file, "\n");
}
gcc_assert (SCHED_TIME (u) >= ps->min_cycle);
gcc_assert (SCHED_TIME (u) <= ps->max_cycle);
crr_insn->cycle = normalized_time;
update_node_sched_params (u, ii, normalized_time, new_min_cycle);
}
}
/* Permute the insns according to their order in PS, from row 0 to
row ii-1, and position them right before LAST. This schedules
the insns of the loop kernel. */
static void
permute_partial_schedule (partial_schedule_ptr ps, rtx_insn *last)
{
int ii = ps->ii;
int row;
ps_insn_ptr ps_ij;
for (row = 0; row < ii ; row++)
for (ps_ij = ps->rows[row]; ps_ij; ps_ij = ps_ij->next_in_row)
{
rtx_insn *insn = ps_rtl_insn (ps, ps_ij->id);
if (PREV_INSN (last) != insn)
{
if (ps_ij->id < ps->g->num_nodes)
reorder_insns_nobb (ps_first_note (ps, ps_ij->id), insn,
PREV_INSN (last));
else
add_insn_before (insn, last, NULL);
}
}
}
/* Set bitmaps TMP_FOLLOW and TMP_PRECEDE to MUST_FOLLOW and MUST_PRECEDE
respectively only if cycle C falls on the border of the scheduling
window boundaries marked by START and END cycles. STEP is the
direction of the window. */
static inline void
set_must_precede_follow (sbitmap *tmp_follow, sbitmap must_follow,
sbitmap *tmp_precede, sbitmap must_precede, int c,
int start, int end, int step)
{
*tmp_precede = NULL;
*tmp_follow = NULL;
if (c == start)
{
if (step == 1)
*tmp_precede = must_precede;
else /* step == -1. */
*tmp_follow = must_follow;
}
if (c == end - step)
{
if (step == 1)
*tmp_follow = must_follow;
else /* step == -1. */
*tmp_precede = must_precede;
}
}
/* Return True if the branch can be moved to row ii-1 while
normalizing the partial schedule PS to start from cycle zero and thus
optimize the SC. Otherwise return False. */
static bool
optimize_sc (partial_schedule_ptr ps, ddg_ptr g)
{
int amount = PS_MIN_CYCLE (ps);
int start, end, step;
int ii = ps->ii;
bool ok = false;
int stage_count, stage_count_curr;
/* Compare the SC after normalization and SC after bringing the branch
to row ii-1. If they are equal just bail out. */
stage_count = calculate_stage_count (ps, amount);
stage_count_curr =
calculate_stage_count (ps, SCHED_TIME (g->closing_branch->cuid) - (ii - 1));
if (stage_count == stage_count_curr)
{
if (dump_file)
fprintf (dump_file, "SMS SC already optimized.\n");
return false;
}
if (dump_file)
{
fprintf (dump_file, "SMS Trying to optimize branch location\n");
fprintf (dump_file, "SMS partial schedule before trial:\n");
print_partial_schedule (ps, dump_file);
}
/* First, normalize the partial scheduling. */
reset_sched_times (ps, amount);
rotate_partial_schedule (ps, amount);
if (dump_file)
{
fprintf (dump_file,
"SMS partial schedule after normalization (ii, %d, SC %d):\n",
ii, stage_count);
print_partial_schedule (ps, dump_file);
}
if (SMODULO (SCHED_TIME (g->closing_branch->cuid), ii) == ii - 1)
return true;
auto_sbitmap sched_nodes (g->num_nodes);
bitmap_ones (sched_nodes);
/* Calculate the new placement of the branch. It should be in row
ii-1 and fall into it's scheduling window. */
if (get_sched_window (ps, g->closing_branch, sched_nodes, ii, &start,
&step, &end) == 0)
{
bool success;
ps_insn_ptr next_ps_i;
int branch_cycle = SCHED_TIME (g->closing_branch->cuid);
int row = SMODULO (branch_cycle, ps->ii);
int num_splits = 0;
sbitmap tmp_precede, tmp_follow;
int min_cycle, c;
if (dump_file)
fprintf (dump_file, "\nTrying to schedule node %d "
"INSN = %d in (%d .. %d) step %d\n",
g->closing_branch->cuid,
(INSN_UID (g->closing_branch->insn)), start, end, step);
gcc_assert ((step > 0 && start < end) || (step < 0 && start > end));
if (step == 1)
{
c = start + ii - SMODULO (start, ii) - 1;
gcc_assert (c >= start);
if (c >= end)
{
if (dump_file)
fprintf (dump_file,
"SMS failed to schedule branch at cycle: %d\n", c);
return false;
}
}
else
{
c = start - SMODULO (start, ii) - 1;
gcc_assert (c <= start);
if (c <= end)
{
if (dump_file)
fprintf (dump_file,
"SMS failed to schedule branch at cycle: %d\n", c);
return false;
}
}
auto_sbitmap must_precede (g->num_nodes);
auto_sbitmap must_follow (g->num_nodes);
/* Try to schedule the branch is it's new cycle. */
calculate_must_precede_follow (g->closing_branch, start, end,
step, ii, sched_nodes,
must_precede, must_follow);
set_must_precede_follow (&tmp_follow, must_follow, &tmp_precede,
must_precede, c, start, end, step);
/* Find the element in the partial schedule related to the closing
branch so we can remove it from it's current cycle. */
for (next_ps_i = ps->rows[row];
next_ps_i; next_ps_i = next_ps_i->next_in_row)
if (next_ps_i->id == g->closing_branch->cuid)
break;
min_cycle = PS_MIN_CYCLE (ps) - SMODULO (PS_MIN_CYCLE (ps), ps->ii);
remove_node_from_ps (ps, next_ps_i);
success =
try_scheduling_node_in_cycle (ps, g->closing_branch->cuid, c,
sched_nodes, &num_splits,
tmp_precede, tmp_follow);
gcc_assert (num_splits == 0);
if (!success)
{
if (dump_file)
fprintf (dump_file,
"SMS failed to schedule branch at cycle: %d, "
"bringing it back to cycle %d\n", c, branch_cycle);
/* The branch was failed to be placed in row ii - 1.
Put it back in it's original place in the partial
schedualing. */
set_must_precede_follow (&tmp_follow, must_follow, &tmp_precede,
must_precede, branch_cycle, start, end,
step);
success =
try_scheduling_node_in_cycle (ps, g->closing_branch->cuid,
branch_cycle, sched_nodes,
&num_splits, tmp_precede,
tmp_follow);
gcc_assert (success && (num_splits == 0));
ok = false;
}
else
{
/* The branch is placed in row ii - 1. */
if (dump_file)
fprintf (dump_file,
"SMS success in moving branch to cycle %d\n", c);
update_node_sched_params (g->closing_branch->cuid, ii, c,
PS_MIN_CYCLE (ps));
ok = true;
}
/* This might have been added to a new first stage. */
if (PS_MIN_CYCLE (ps) < min_cycle)
reset_sched_times (ps, 0);
}
return ok;
}
static void
duplicate_insns_of_cycles (partial_schedule_ptr ps, int from_stage,
int to_stage, rtx count_reg, class loop *loop)
{
int row;
ps_insn_ptr ps_ij;
copy_bb_data id;
for (row = 0; row < ps->ii; row++)
for (ps_ij = ps->rows[row]; ps_ij; ps_ij = ps_ij->next_in_row)
{
int u = ps_ij->id;
int first_u, last_u;
rtx_insn *u_insn;
/* Do not duplicate any insn which refers to count_reg as it
belongs to the control part.
The closing branch is scheduled as well and thus should
be ignored.
TODO: This should be done by analyzing the control part of
the loop. */
u_insn = ps_rtl_insn (ps, u);
if (reg_mentioned_p (count_reg, u_insn)
|| JUMP_P (u_insn))
continue;
first_u = SCHED_STAGE (u);
last_u = first_u + ps_num_consecutive_stages (ps, u) - 1;
if (from_stage <= last_u && to_stage >= first_u)
{
if (u < ps->g->num_nodes)
duplicate_insn_chain (ps_first_note (ps, u), u_insn,
loop, &id);
else
emit_insn (copy_rtx (PATTERN (u_insn)));
}
}
}
/* Generate the instructions (including reg_moves) for prolog & epilog. */
static void
generate_prolog_epilog (partial_schedule_ptr ps, class loop *loop,
rtx count_reg, bool adjust_init)
{
int i;
int last_stage = PS_STAGE_COUNT (ps) - 1;
edge e;
/* Generate the prolog, inserting its insns on the loop-entry edge. */
start_sequence ();
if (adjust_init)
{
/* Generate instructions at the beginning of the prolog to
adjust the loop count by STAGE_COUNT. If loop count is constant
and it not used anywhere in prologue, this constant is adjusted by
STAGE_COUNT outside of generate_prolog_epilog function. */
rtx sub_reg = NULL_RTX;
sub_reg = expand_simple_binop (GET_MODE (count_reg), MINUS, count_reg,
gen_int_mode (last_stage,
GET_MODE (count_reg)),
count_reg, 1, OPTAB_DIRECT);
gcc_assert (REG_P (sub_reg));
if (REGNO (sub_reg) != REGNO (count_reg))
emit_move_insn (count_reg, sub_reg);
}
for (i = 0; i < last_stage; i++)
duplicate_insns_of_cycles (ps, 0, i, count_reg, loop);
/* Put the prolog on the entry edge. */
e = loop_preheader_edge (loop);
split_edge_and_insert (e, get_insns ());
if (!flag_resched_modulo_sched)
e->dest->flags |= BB_DISABLE_SCHEDULE;
end_sequence ();
/* Generate the epilog, inserting its insns on the loop-exit edge. */
start_sequence ();
for (i = 0; i < last_stage; i++)
duplicate_insns_of_cycles (ps, i + 1, last_stage, count_reg, loop);
/* Put the epilogue on the exit edge. */
gcc_assert (single_exit (loop));
e = single_exit (loop);
split_edge_and_insert (e, get_insns ());
if (!flag_resched_modulo_sched)
e->dest->flags |= BB_DISABLE_SCHEDULE;
end_sequence ();
}
/* Mark LOOP as software pipelined so the later
scheduling passes don't touch it. */
static void
mark_loop_unsched (class loop *loop)
{
unsigned i;
basic_block *bbs = get_loop_body (loop);
for (i = 0; i < loop->num_nodes; i++)
bbs[i]->flags |= BB_DISABLE_SCHEDULE;
free (bbs);
}
/* Return true if all the BBs of the loop are empty except the
loop header. */
static bool
loop_single_full_bb_p (class loop *loop)
{
unsigned i;
basic_block *bbs = get_loop_body (loop);
for (i = 0; i < loop->num_nodes ; i++)
{
rtx_insn *head, *tail;
bool empty_bb = true;
if (bbs[i] == loop->header)
continue;
/* Make sure that basic blocks other than the header
have only notes labels or jumps. */
get_ebb_head_tail (bbs[i], bbs[i], &head, &tail);
for (; head != NEXT_INSN (tail); head = NEXT_INSN (head))
{
if (NOTE_P (head) || LABEL_P (head)
|| (INSN_P (head) && (DEBUG_INSN_P (head) || JUMP_P (head))))
continue;
empty_bb = false;
break;
}
if (! empty_bb)
{
free (bbs);
return false;
}
}
free (bbs);
return true;
}
/* Dump file:line from INSN's location info to dump_file. */
static void
dump_insn_location (rtx_insn *insn)
{
if (dump_file && INSN_HAS_LOCATION (insn))
{
expanded_location xloc = insn_location (insn);
fprintf (dump_file, " %s:%i", xloc.file, xloc.line);
}
}
/* A simple loop from SMS point of view; it is a loop that is composed of
either a single basic block or two BBs - a header and a latch. */
#define SIMPLE_SMS_LOOP_P(loop) ((loop->num_nodes < 3 ) \
&& (EDGE_COUNT (loop->latch->preds) == 1) \
&& (EDGE_COUNT (loop->latch->succs) == 1))
/* Return true if the loop is in its canonical form and false if not.
i.e. SIMPLE_SMS_LOOP_P and have one preheader block, and single exit. */
static bool
loop_canon_p (class loop *loop)
{
if (loop->inner || !loop_outer (loop))
{
if (dump_file)
fprintf (dump_file, "SMS loop inner or !loop_outer\n");
return false;
}
if (!single_exit (loop))
{
if (dump_file)
{
rtx_insn *insn = BB_END (loop->header);
fprintf (dump_file, "SMS loop many exits");
dump_insn_location (insn);
fprintf (dump_file, "\n");
}
return false;
}
if (! SIMPLE_SMS_LOOP_P (loop) && ! loop_single_full_bb_p (loop))
{
if (dump_file)
{
rtx_insn *insn = BB_END (loop->header);
fprintf (dump_file, "SMS loop many BBs.");
dump_insn_location (insn);
fprintf (dump_file, "\n");
}
return false;
}
return true;
}
/* If there are more than one entry for the loop,
make it one by splitting the first entry edge and
redirecting the others to the new BB. */
static void
canon_loop (class loop *loop)
{
edge e;
edge_iterator i;
/* Avoid annoying special cases of edges going to exit
block. */
FOR_EACH_EDGE (e, i, EXIT_BLOCK_PTR_FOR_FN (cfun)->preds)
if ((e->flags & EDGE_FALLTHRU) && (EDGE_COUNT (e->src->succs) > 1))
split_edge (e);
if (loop->latch == loop->header
|| EDGE_COUNT (loop->latch->succs) > 1)
{
FOR_EACH_EDGE (e, i, loop->header->preds)
if (e->src == loop->latch)
break;
split_edge (e);
}
}
/* Setup infos. */
static void
setup_sched_infos (void)
{
memcpy (&sms_common_sched_info, &haifa_common_sched_info,
sizeof (sms_common_sched_info));
sms_common_sched_info.sched_pass_id = SCHED_SMS_PASS;
common_sched_info = &sms_common_sched_info;
sched_deps_info = &sms_sched_deps_info;
current_sched_info = &sms_sched_info;
}
/* Probability in % that the sms-ed loop rolls enough so that optimized
version may be entered. Just a guess. */
#define PROB_SMS_ENOUGH_ITERATIONS 80
/* Main entry point, perform SMS scheduling on the loops of the function
that consist of single basic blocks. */
static void
sms_schedule (void)
{
rtx_insn *insn;
ddg_ptr *g_arr, g;
int * node_order;
int maxii, max_asap;
partial_schedule_ptr ps;
basic_block bb = NULL;
basic_block condition_bb = NULL;
edge latch_edge;
HOST_WIDE_INT trip_count, max_trip_count;
HARD_REG_SET prohibited_regs;
loop_optimizer_init (LOOPS_HAVE_PREHEADERS
| LOOPS_HAVE_RECORDED_EXITS);
if (number_of_loops (cfun) <= 1)
{
loop_optimizer_finalize ();
return; /* There are no loops to schedule. */
}
/* Initialize issue_rate. */
if (targetm.sched.issue_rate)
{
int temp = reload_completed;
reload_completed = 1;
issue_rate = targetm.sched.issue_rate ();
reload_completed = temp;
}
else
issue_rate = 1;
/* Initialize the scheduler. */
setup_sched_infos ();
haifa_sched_init ();
/* Allocate memory to hold the DDG array one entry for each loop.
We use loop->num as index into this array. */
g_arr = XCNEWVEC (ddg_ptr, number_of_loops (cfun));
REG_SET_TO_HARD_REG_SET (prohibited_regs, &df->regular_block_artificial_uses);
if (dump_file)
{
fprintf (dump_file, "\n\nSMS analysis phase\n");
fprintf (dump_file, "===================\n\n");
}
/* Build DDGs for all the relevant loops and hold them in G_ARR
indexed by the loop index. */
for (auto loop : loops_list (cfun, 0))
{
rtx_insn *head, *tail;
rtx count_reg;
/* For debugging. */
if (dbg_cnt (sms_sched_loop) == false)
{
if (dump_file)
fprintf (dump_file, "SMS reached max limit... \n");
break;
}
if (dump_file)
{
rtx_insn *insn = BB_END (loop->header);
fprintf (dump_file, "SMS loop num: %d", loop->num);
dump_insn_location (insn);
fprintf (dump_file, "\n");
}
if (! loop_canon_p (loop))
continue;
if (! loop_single_full_bb_p (loop))
{
if (dump_file)
fprintf (dump_file, "SMS not loop_single_full_bb_p\n");
continue;
}
bb = loop->header;
get_ebb_head_tail (bb, bb, &head, &tail);
latch_edge = loop_latch_edge (loop);
gcc_assert (single_exit (loop));
trip_count = get_estimated_loop_iterations_int (loop);
max_trip_count = get_max_loop_iterations_int (loop);
/* Perform SMS only on loops that their average count is above threshold. */
if ( latch_edge->count () > profile_count::zero ()
&& (latch_edge->count()
< single_exit (loop)->count ().apply_scale
(param_sms_loop_average_count_threshold, 1)))
{
if (dump_file)
{
dump_insn_location (tail);
fprintf (dump_file, "\nSMS single-bb-loop\n");
if (profile_info && flag_branch_probabilities)
{
fprintf (dump_file, "SMS loop-count ");
fprintf (dump_file, "%" PRId64,
(int64_t) bb->count.to_gcov_type ());
fprintf (dump_file, "\n");
fprintf (dump_file, "SMS trip-count ");
fprintf (dump_file, "%" PRId64 "max %" PRId64,
(int64_t) trip_count, (int64_t) max_trip_count);
fprintf (dump_file, "\n");
}
}
continue;
}
/* Make sure this is a doloop. */
if ( !(count_reg = doloop_register_get (head, tail)))
{
if (dump_file)
fprintf (dump_file, "SMS doloop_register_get failed\n");
continue;
}
/* Don't handle BBs with calls or barriers
or !single_set with the exception of do-loop control part insns.
??? Should handle insns defining subregs. */
for (insn = head; insn != NEXT_INSN (tail); insn = NEXT_INSN (insn))
{
if (INSN_P (insn))
{
HARD_REG_SET regs;
CLEAR_HARD_REG_SET (regs);
note_stores (insn, record_hard_reg_sets, &regs);
if (hard_reg_set_intersect_p (regs, prohibited_regs))
break;
}
if (CALL_P (insn)
|| BARRIER_P (insn)
|| (INSN_P (insn) && single_set (insn)
&& GET_CODE (SET_DEST (single_set (insn))) == SUBREG)
/* Not a single set. */
|| (NONDEBUG_INSN_P (insn) && !JUMP_P (insn)
&& !single_set (insn) && GET_CODE (PATTERN (insn)) != USE
/* But non-single-set allowed in one special case. */
&& (insn != prev_nondebug_insn (tail)
|| !reg_mentioned_p (count_reg, insn))))
break;
}
if (insn != NEXT_INSN (tail))
{
if (dump_file)
{
if (CALL_P (insn))
fprintf (dump_file, "SMS loop-with-call\n");
else if (BARRIER_P (insn))
fprintf (dump_file, "SMS loop-with-barrier\n");
else if (INSN_P (insn) && single_set (insn)
&& GET_CODE (SET_DEST (single_set (insn))) == SUBREG)
fprintf (dump_file, "SMS loop with subreg in lhs\n");
else
fprintf (dump_file,
"SMS loop-with-not-single-set-or-prohibited-reg\n");
print_rtl_single (dump_file, insn);
}
continue;
}
/* Always schedule the closing branch with the rest of the
instructions. The branch is rotated to be in row ii-1 at the
end of the scheduling procedure to make sure it's the last
instruction in the iteration. */
if (! (g = create_ddg (bb, 1)))
{
if (dump_file)
fprintf (dump_file, "SMS create_ddg failed\n");
continue;
}
g_arr[loop->num] = g;
if (dump_file)
fprintf (dump_file, "...OK\n");
}
if (dump_file)
{
fprintf (dump_file, "\nSMS transformation phase\n");
fprintf (dump_file, "=========================\n\n");
}
/* We don't want to perform SMS on new loops - created by versioning. */
for (auto loop : loops_list (cfun, 0))
{
rtx_insn *head, *tail;
rtx count_reg;
rtx_insn *count_init;
int mii, rec_mii, stage_count, min_cycle;
int64_t loop_count = 0;
bool opt_sc_p, adjust_inplace = false;
basic_block pre_header;
if (! (g = g_arr[loop->num]))
continue;
if (dump_file)
{
rtx_insn *insn = BB_END (loop->header);
fprintf (dump_file, "SMS loop num: %d", loop->num);
dump_insn_location (insn);
fprintf (dump_file, "\n");
print_ddg (dump_file, g);
}
get_ebb_head_tail (loop->header, loop->header, &head, &tail);
latch_edge = loop_latch_edge (loop);
gcc_assert (single_exit (loop));
trip_count = get_estimated_loop_iterations_int (loop);
max_trip_count = get_max_loop_iterations_int (loop);
if (dump_file)
{
dump_insn_location (tail);
fprintf (dump_file, "\nSMS single-bb-loop\n");
if (profile_info && flag_branch_probabilities)
{
fprintf (dump_file, "SMS loop-count ");
fprintf (dump_file, "%" PRId64,
(int64_t) bb->count.to_gcov_type ());
fprintf (dump_file, "\n");
}
fprintf (dump_file, "SMS doloop\n");
fprintf (dump_file, "SMS built-ddg %d\n", g->num_nodes);
fprintf (dump_file, "SMS num-loads %d\n", g->num_loads);
fprintf (dump_file, "SMS num-stores %d\n", g->num_stores);
}
count_reg = doloop_register_get (head, tail);
gcc_assert (count_reg);
pre_header = loop_preheader_edge (loop)->src;
count_init = const_iteration_count (count_reg, pre_header, &loop_count,
&adjust_inplace);
if (dump_file && count_init)
{
fprintf (dump_file, "SMS const-doloop ");
fprintf (dump_file, "%" PRId64,
loop_count);
fprintf (dump_file, "\n");
}
node_order = XNEWVEC (int, g->num_nodes);
mii = 1; /* Need to pass some estimate of mii. */
rec_mii = sms_order_nodes (g, mii, node_order, &max_asap);
mii = MAX (res_MII (g), rec_mii);
mii = MAX (mii, 1);
maxii = MAX (max_asap, param_sms_max_ii_factor * mii);
if (dump_file)
fprintf (dump_file, "SMS iis %d %d %d (rec_mii, mii, maxii)\n",
rec_mii, mii, maxii);
for (;;)
{
set_node_sched_params (g);
stage_count = 0;
opt_sc_p = false;
ps = sms_schedule_by_order (g, mii, maxii, node_order);
if (ps)
{
/* Try to achieve optimized SC by normalizing the partial
schedule (having the cycles start from cycle zero).
The branch location must be placed in row ii-1 in the
final scheduling. If failed, shift all instructions to
position the branch in row ii-1. */
opt_sc_p = optimize_sc (ps, g);
if (opt_sc_p)
stage_count = calculate_stage_count (ps, 0);
else
{
/* Bring the branch to cycle ii-1. */
int amount = (SCHED_TIME (g->closing_branch->cuid)
- (ps->ii - 1));
if (dump_file)
fprintf (dump_file, "SMS schedule branch at cycle ii-1\n");
stage_count = calculate_stage_count (ps, amount);
}
gcc_assert (stage_count >= 1);
}
/* The default value of param_sms_min_sc is 2 as stage count of
1 means that there is no interleaving between iterations thus
we let the scheduling passes do the job in this case. */
if (stage_count < param_sms_min_sc
|| (count_init && (loop_count <= stage_count))
|| (max_trip_count >= 0 && max_trip_count <= stage_count)
|| (trip_count >= 0 && trip_count <= stage_count))
{
if (dump_file)
{
fprintf (dump_file, "SMS failed... \n");
fprintf (dump_file, "SMS sched-failed (stage-count=%d,"
" loop-count=", stage_count);
fprintf (dump_file, "%" PRId64, loop_count);
fprintf (dump_file, ", trip-count=");
fprintf (dump_file, "%" PRId64 "max %" PRId64,
(int64_t) trip_count, (int64_t) max_trip_count);
fprintf (dump_file, ")\n");
}
break;
}
if (!opt_sc_p)
{
/* Rotate the partial schedule to have the branch in row ii-1. */
int amount = SCHED_TIME (g->closing_branch->cuid) - (ps->ii - 1);
reset_sched_times (ps, amount);
rotate_partial_schedule (ps, amount);
}
set_columns_for_ps (ps);
min_cycle = PS_MIN_CYCLE (ps) - SMODULO (PS_MIN_CYCLE (ps), ps->ii);
if (!schedule_reg_moves (ps))
{
mii = ps->ii + 1;
free_partial_schedule (ps);
continue;
}
/* Moves that handle incoming values might have been added
to a new first stage. Bump the stage count if so.
??? Perhaps we could consider rotating the schedule here
instead? */
if (PS_MIN_CYCLE (ps) < min_cycle)
{
reset_sched_times (ps, 0);
stage_count++;
}
/* The stage count should now be correct without rotation. */
gcc_checking_assert (stage_count == calculate_stage_count (ps, 0));
PS_STAGE_COUNT (ps) = stage_count;
canon_loop (loop);
if (dump_file)
{
dump_insn_location (tail);
fprintf (dump_file, " SMS succeeded %d %d (with ii, sc)\n",
ps->ii, stage_count);
print_partial_schedule (ps, dump_file);
}
if (count_init)
{
if (adjust_inplace)
{
/* When possible, set new iteration count of loop kernel in
place. Otherwise, generate_prolog_epilog creates an insn
to adjust. */
SET_SRC (single_set (count_init)) = GEN_INT (loop_count
- stage_count + 1);
}
}
else
{
/* case the BCT count is not known , Do loop-versioning */
rtx comp_rtx = gen_rtx_GT (VOIDmode, count_reg,
gen_int_mode (stage_count,
GET_MODE (count_reg)));
profile_probability prob = profile_probability::guessed_always ()
.apply_scale (PROB_SMS_ENOUGH_ITERATIONS, 100);
loop_version (loop, comp_rtx, &condition_bb,
prob, prob.invert (),
prob, prob.invert (), true);
}
/* Now apply the scheduled kernel to the RTL of the loop. */
permute_partial_schedule (ps, g->closing_branch->first_note);
/* Mark this loop as software pipelined so the later
scheduling passes don't touch it. */
if (! flag_resched_modulo_sched)
mark_loop_unsched (loop);
/* The life-info is not valid any more. */
df_set_bb_dirty (g->bb);
apply_reg_moves (ps);
if (dump_file)
print_node_sched_params (dump_file, g->num_nodes, ps);
/* Generate prolog and epilog. */
generate_prolog_epilog (ps, loop, count_reg, !adjust_inplace);
break;
}
free_partial_schedule (ps);
node_sched_param_vec.release ();
free (node_order);
free_ddg (g);
}
free (g_arr);
/* Release scheduler data, needed until now because of DFA. */
haifa_sched_finish ();
loop_optimizer_finalize ();
}
/* The SMS scheduling algorithm itself
-----------------------------------
Input: 'O' an ordered list of insns of a loop.
Output: A scheduling of the loop - kernel, prolog, and epilogue.
'Q' is the empty Set
'PS' is the partial schedule; it holds the currently scheduled nodes with
their cycle/slot.
'PSP' previously scheduled predecessors.
'PSS' previously scheduled successors.
't(u)' the cycle where u is scheduled.
'l(u)' is the latency of u.
'd(v,u)' is the dependence distance from v to u.
'ASAP(u)' the earliest time at which u could be scheduled as computed in
the node ordering phase.
'check_hardware_resources_conflicts(u, PS, c)'
run a trace around cycle/slot through DFA model
to check resource conflicts involving instruction u
at cycle c given the partial schedule PS.
'add_to_partial_schedule_at_time(u, PS, c)'
Add the node/instruction u to the partial schedule
PS at time c.
'calculate_register_pressure(PS)'
Given a schedule of instructions, calculate the register
pressure it implies. One implementation could be the
maximum number of overlapping live ranges.
'maxRP' The maximum allowed register pressure, it is usually derived from the number
registers available in the hardware.
1. II = MII.
2. PS = empty list
3. for each node u in O in pre-computed order
4. if (PSP(u) != Q && PSS(u) == Q) then
5. Early_start(u) = max ( t(v) + l(v) - d(v,u)*II ) over all every v in PSP(u).
6. start = Early_start; end = Early_start + II - 1; step = 1
11. else if (PSP(u) == Q && PSS(u) != Q) then
12. Late_start(u) = min ( t(v) - l(v) + d(v,u)*II ) over all every v in PSS(u).
13. start = Late_start; end = Late_start - II + 1; step = -1
14. else if (PSP(u) != Q && PSS(u) != Q) then
15. Early_start(u) = max ( t(v) + l(v) - d(v,u)*II ) over all every v in PSP(u).
16. Late_start(u) = min ( t(v) - l(v) + d(v,u)*II ) over all every v in PSS(u).
17. start = Early_start;
18. end = min(Early_start + II - 1 , Late_start);
19. step = 1
20. else "if (PSP(u) == Q && PSS(u) == Q)"
21. start = ASAP(u); end = start + II - 1; step = 1
22. endif
23. success = false
24. for (c = start ; c != end ; c += step)
25. if check_hardware_resources_conflicts(u, PS, c) then
26. add_to_partial_schedule_at_time(u, PS, c)
27. success = true
28. break
29. endif
30. endfor
31. if (success == false) then
32. II = II + 1
33. if (II > maxII) then
34. finish - failed to schedule
35. endif
36. goto 2.
37. endif
38. endfor
39. if (calculate_register_pressure(PS) > maxRP) then
40. goto 32.
41. endif
42. compute epilogue & prologue
43. finish - succeeded to schedule
??? The algorithm restricts the scheduling window to II cycles.
In rare cases, it may be better to allow windows of II+1 cycles.
The window would then start and end on the same row, but with
different "must precede" and "must follow" requirements. */
/* A threshold for the number of repeated unsuccessful attempts to insert
an empty row, before we flush the partial schedule and start over. */
#define MAX_SPLIT_NUM 10
/* Given the partial schedule PS, this function calculates and returns the
cycles in which we can schedule the node with the given index I.
NOTE: Here we do the backtracking in SMS, in some special cases. We have
noticed that there are several cases in which we fail to SMS the loop
because the sched window of a node is empty due to tight data-deps. In
such cases we want to unschedule some of the predecessors/successors
until we get non-empty scheduling window. It returns -1 if the
scheduling window is empty and zero otherwise. */
static int
get_sched_window (partial_schedule_ptr ps, ddg_node_ptr u_node,
sbitmap sched_nodes, int ii, int *start_p, int *step_p,
int *end_p)
{
int start, step, end;
int early_start, late_start;
ddg_edge_ptr e;
auto_sbitmap psp (ps->g->num_nodes);
auto_sbitmap pss (ps->g->num_nodes);
sbitmap u_node_preds = NODE_PREDECESSORS (u_node);
sbitmap u_node_succs = NODE_SUCCESSORS (u_node);
int psp_not_empty;
int pss_not_empty;
int count_preds;
int count_succs;
/* 1. compute sched window for u (start, end, step). */
bitmap_clear (psp);
bitmap_clear (pss);
psp_not_empty = bitmap_and (psp, u_node_preds, sched_nodes);
pss_not_empty = bitmap_and (pss, u_node_succs, sched_nodes);
/* We first compute a forward range (start <= end), then decide whether
to reverse it. */
early_start = INT_MIN;
late_start = INT_MAX;
start = INT_MIN;
end = INT_MAX;
step = 1;
count_preds = 0;
count_succs = 0;
if (dump_file && (psp_not_empty || pss_not_empty))
{
fprintf (dump_file, "\nAnalyzing dependencies for node %d (INSN %d)"
"; ii = %d\n\n", u_node->cuid, INSN_UID (u_node->insn), ii);
fprintf (dump_file, "%11s %11s %11s %11s %5s\n",
"start", "early start", "late start", "end", "time");
fprintf (dump_file, "=========== =========== =========== ==========="
" =====\n");
}
/* Calculate early_start and limit end. Both bounds are inclusive. */
if (psp_not_empty)
for (e = u_node->in; e != 0; e = e->next_in)
{
int v = e->src->cuid;
if (bitmap_bit_p (sched_nodes, v))
{
int p_st = SCHED_TIME (v);
int earliest = p_st + e->latency - (e->distance * ii);
int latest = (e->data_type == MEM_DEP ? p_st + ii - 1 : INT_MAX);
if (dump_file)
{
fprintf (dump_file, "%11s %11d %11s %11d %5d",
"", earliest, "", latest, p_st);
print_ddg_edge (dump_file, e);
fprintf (dump_file, "\n");
}
early_start = MAX (early_start, earliest);
end = MIN (end, latest);
if (e->type == TRUE_DEP && e->data_type == REG_DEP)
count_preds++;
}
}
/* Calculate late_start and limit start. Both bounds are inclusive. */
if (pss_not_empty)
for (e = u_node->out; e != 0; e = e->next_out)
{
int v = e->dest->cuid;
if (bitmap_bit_p (sched_nodes, v))
{
int s_st = SCHED_TIME (v);
int earliest = (e->data_type == MEM_DEP ? s_st - ii + 1 : INT_MIN);
int latest = s_st - e->latency + (e->distance * ii);
if (dump_file)
{
fprintf (dump_file, "%11d %11s %11d %11s %5d",
earliest, "", latest, "", s_st);
print_ddg_edge (dump_file, e);
fprintf (dump_file, "\n");
}
start = MAX (start, earliest);
late_start = MIN (late_start, latest);
if (e->type == TRUE_DEP && e->data_type == REG_DEP)
count_succs++;
}
}
if (dump_file && (psp_not_empty || pss_not_empty))
{
fprintf (dump_file, "----------- ----------- ----------- -----------"
" -----\n");
fprintf (dump_file, "%11d %11d %11d %11d %5s %s\n",
start, early_start, late_start, end, "",
"(max, max, min, min)");
}
/* Get a target scheduling window no bigger than ii. */
if (early_start == INT_MIN && late_start == INT_MAX)
early_start = NODE_ASAP (u_node);
else if (early_start == INT_MIN)
early_start = late_start - (ii - 1);
late_start = MIN (late_start, early_start + (ii - 1));
/* Apply memory dependence limits. */
start = MAX (start, early_start);
end = MIN (end, late_start);
if (dump_file && (psp_not_empty || pss_not_empty))
fprintf (dump_file, "%11s %11d %11d %11s %5s final window\n",
"", start, end, "", "");
/* If there are at least as many successors as predecessors, schedule the
node close to its successors. */
if (pss_not_empty && count_succs >= count_preds)
{
std::swap (start, end);
step = -1;
}
/* Now that we've finalized the window, make END an exclusive rather
than an inclusive bound. */
end += step;
*start_p = start;
*step_p = step;
*end_p = end;
if ((start >= end && step == 1) || (start <= end && step == -1))
{
if (dump_file)
fprintf (dump_file, "\nEmpty window: start=%d, end=%d, step=%d\n",
start, end, step);
return -1;
}
return 0;
}
/* Calculate MUST_PRECEDE/MUST_FOLLOW bitmaps of U_NODE; which is the
node currently been scheduled. At the end of the calculation
MUST_PRECEDE/MUST_FOLLOW contains all predecessors/successors of
U_NODE which are (1) already scheduled in the first/last row of
U_NODE's scheduling window, (2) whose dependence inequality with U
becomes an equality when U is scheduled in this same row, and (3)
whose dependence latency is zero.
The first and last rows are calculated using the following parameters:
START/END rows - The cycles that begins/ends the traversal on the window;
searching for an empty cycle to schedule U_NODE.
STEP - The direction in which we traverse the window.
II - The initiation interval. */
static void
calculate_must_precede_follow (ddg_node_ptr u_node, int start, int end,
int step, int ii, sbitmap sched_nodes,
sbitmap must_precede, sbitmap must_follow)
{
ddg_edge_ptr e;
int first_cycle_in_window, last_cycle_in_window;
gcc_assert (must_precede && must_follow);
/* Consider the following scheduling window:
{first_cycle_in_window, first_cycle_in_window+1, ...,
last_cycle_in_window}. If step is 1 then the following will be
the order we traverse the window: {start=first_cycle_in_window,
first_cycle_in_window+1, ..., end=last_cycle_in_window+1},
or {start=last_cycle_in_window, last_cycle_in_window-1, ...,
end=first_cycle_in_window-1} if step is -1. */
first_cycle_in_window = (step == 1) ? start : end - step;
last_cycle_in_window = (step == 1) ? end - step : start;
bitmap_clear (must_precede);
bitmap_clear (must_follow);
if (dump_file)
fprintf (dump_file, "\nmust_precede: ");
/* Instead of checking if:
(SMODULO (SCHED_TIME (e->src), ii) == first_row_in_window)
&& ((SCHED_TIME (e->src) + e->latency - (e->distance * ii)) ==
first_cycle_in_window)
&& e->latency == 0
we use the fact that latency is non-negative:
SCHED_TIME (e->src) - (e->distance * ii) <=
SCHED_TIME (e->src) + e->latency - (e->distance * ii)) <=
first_cycle_in_window
and check only if
SCHED_TIME (e->src) - (e->distance * ii) == first_cycle_in_window */
for (e = u_node->in; e != 0; e = e->next_in)
if (bitmap_bit_p (sched_nodes, e->src->cuid)
&& ((SCHED_TIME (e->src->cuid) - (e->distance * ii)) ==
first_cycle_in_window))
{
if (dump_file)
fprintf (dump_file, "%d ", e->src->cuid);
bitmap_set_bit (must_precede, e->src->cuid);
}
if (dump_file)
fprintf (dump_file, "\nmust_follow: ");
/* Instead of checking if:
(SMODULO (SCHED_TIME (e->dest), ii) == last_row_in_window)
&& ((SCHED_TIME (e->dest) - e->latency + (e->distance * ii)) ==
last_cycle_in_window)
&& e->latency == 0
we use the fact that latency is non-negative:
SCHED_TIME (e->dest) + (e->distance * ii) >=
SCHED_TIME (e->dest) - e->latency + (e->distance * ii)) >=
last_cycle_in_window
and check only if
SCHED_TIME (e->dest) + (e->distance * ii) == last_cycle_in_window */
for (e = u_node->out; e != 0; e = e->next_out)
if (bitmap_bit_p (sched_nodes, e->dest->cuid)
&& ((SCHED_TIME (e->dest->cuid) + (e->distance * ii)) ==
last_cycle_in_window))
{
if (dump_file)
fprintf (dump_file, "%d ", e->dest->cuid);
bitmap_set_bit (must_follow, e->dest->cuid);
}
if (dump_file)
fprintf (dump_file, "\n");
}
/* Return 1 if U_NODE can be scheduled in CYCLE. Use the following
parameters to decide if that's possible:
PS - The partial schedule.
U - The serial number of U_NODE.
NUM_SPLITS - The number of row splits made so far.
MUST_PRECEDE - The nodes that must precede U_NODE. (only valid at
the first row of the scheduling window)
MUST_FOLLOW - The nodes that must follow U_NODE. (only valid at the
last row of the scheduling window) */
static bool
try_scheduling_node_in_cycle (partial_schedule_ptr ps,
int u, int cycle, sbitmap sched_nodes,
int *num_splits, sbitmap must_precede,
sbitmap must_follow)
{
ps_insn_ptr psi;
bool success = 0;
verify_partial_schedule (ps, sched_nodes);
psi = ps_add_node_check_conflicts (ps, u, cycle, must_precede, must_follow);
if (psi)
{
SCHED_TIME (u) = cycle;
bitmap_set_bit (sched_nodes, u);
success = 1;
*num_splits = 0;
if (dump_file)
fprintf (dump_file, "Scheduled w/o split in %d\n", cycle);
}
return success;
}
/* This function implements the scheduling algorithm for SMS according to the
above algorithm. */
static partial_schedule_ptr
sms_schedule_by_order (ddg_ptr g, int mii, int maxii, int *nodes_order)
{
int ii = mii;
int i, c, success, num_splits = 0;
int flush_and_start_over = true;
int num_nodes = g->num_nodes;
int start, end, step; /* Place together into one struct? */
auto_sbitmap sched_nodes (num_nodes);
auto_sbitmap must_precede (num_nodes);
auto_sbitmap must_follow (num_nodes);
auto_sbitmap tobe_scheduled (num_nodes);
/* Value of param_sms_dfa_history is a limit on the number of cycles that
resource conflicts can span. ??? Should be provided by DFA, and be
dependent on the type of insn scheduled. Set to 0 by default to save
compile time. */
partial_schedule_ptr ps = create_partial_schedule (ii, g,
param_sms_dfa_history);
bitmap_ones (tobe_scheduled);
bitmap_clear (sched_nodes);
while (flush_and_start_over && (ii < maxii))
{
if (dump_file)
fprintf (dump_file, "Starting with ii=%d\n", ii);
flush_and_start_over = false;
bitmap_clear (sched_nodes);
for (i = 0; i < num_nodes; i++)
{
int u = nodes_order[i];
ddg_node_ptr u_node = &ps->g->nodes[u];
rtx_insn *insn = u_node->insn;
gcc_checking_assert (NONDEBUG_INSN_P (insn));
if (bitmap_bit_p (sched_nodes, u))
continue;
/* Try to get non-empty scheduling window. */
success = 0;
if (get_sched_window (ps, u_node, sched_nodes, ii, &start,
&step, &end) == 0)
{
if (dump_file)
fprintf (dump_file, "\nTrying to schedule node %d "
"INSN = %d in (%d .. %d) step %d\n", u, (INSN_UID
(g->nodes[u].insn)), start, end, step);
gcc_assert ((step > 0 && start < end)
|| (step < 0 && start > end));
calculate_must_precede_follow (u_node, start, end, step, ii,
sched_nodes, must_precede,
must_follow);
for (c = start; c != end; c += step)
{
sbitmap tmp_precede, tmp_follow;
set_must_precede_follow (&tmp_follow, must_follow,
&tmp_precede, must_precede,
c, start, end, step);
success =
try_scheduling_node_in_cycle (ps, u, c,
sched_nodes,
&num_splits, tmp_precede,
tmp_follow);
if (success)
break;
}
verify_partial_schedule (ps, sched_nodes);
}
if (!success)
{
int split_row;
if (ii++ == maxii)
break;
if (num_splits >= MAX_SPLIT_NUM)
{
num_splits = 0;
flush_and_start_over = true;
verify_partial_schedule (ps, sched_nodes);
reset_partial_schedule (ps, ii);
verify_partial_schedule (ps, sched_nodes);
break;
}
num_splits++;
/* The scheduling window is exclusive of 'end'
whereas compute_split_window() expects an inclusive,
ordered range. */
if (step == 1)
split_row = compute_split_row (sched_nodes, start, end - 1,
ps->ii, u_node);
else
split_row = compute_split_row (sched_nodes, end + 1, start,
ps->ii, u_node);
ps_insert_empty_row (ps, split_row, sched_nodes);
i--; /* Go back and retry node i. */
if (dump_file)
fprintf (dump_file, "num_splits=%d\n", num_splits);
}
/* ??? If (success), check register pressure estimates. */
} /* Continue with next node. */
} /* While flush_and_start_over. */
if (ii >= maxii)
{
free_partial_schedule (ps);
ps = NULL;
}
else
gcc_assert (bitmap_equal_p (tobe_scheduled, sched_nodes));
return ps;
}
/* This function inserts a new empty row into PS at the position
according to SPLITROW, keeping all already scheduled instructions
intact and updating their SCHED_TIME and cycle accordingly. */
static void
ps_insert_empty_row (partial_schedule_ptr ps, int split_row,
sbitmap sched_nodes)
{
ps_insn_ptr crr_insn;
ps_insn_ptr *rows_new;
int ii = ps->ii;
int new_ii = ii + 1;
int row;
int *rows_length_new;
verify_partial_schedule (ps, sched_nodes);
/* We normalize sched_time and rotate ps to have only non-negative sched
times, for simplicity of updating cycles after inserting new row. */
split_row -= ps->min_cycle;
split_row = SMODULO (split_row, ii);
if (dump_file)
fprintf (dump_file, "split_row=%d\n", split_row);
reset_sched_times (ps, PS_MIN_CYCLE (ps));
rotate_partial_schedule (ps, PS_MIN_CYCLE (ps));
rows_new = (ps_insn_ptr *) xcalloc (new_ii, sizeof (ps_insn_ptr));
rows_length_new = (int *) xcalloc (new_ii, sizeof (int));
for (row = 0; row < split_row; row++)
{
rows_new[row] = ps->rows[row];
rows_length_new[row] = ps->rows_length[row];
ps->rows[row] = NULL;
for (crr_insn = rows_new[row];
crr_insn; crr_insn = crr_insn->next_in_row)
{
int u = crr_insn->id;
int new_time = SCHED_TIME (u) + (SCHED_TIME (u) / ii);
SCHED_TIME (u) = new_time;
crr_insn->cycle = new_time;
SCHED_ROW (u) = new_time % new_ii;
SCHED_STAGE (u) = new_time / new_ii;
}
}
rows_new[split_row] = NULL;
for (row = split_row; row < ii; row++)
{
rows_new[row + 1] = ps->rows[row];
rows_length_new[row + 1] = ps->rows_length[row];
ps->rows[row] = NULL;
for (crr_insn = rows_new[row + 1];
crr_insn; crr_insn = crr_insn->next_in_row)
{
int u = crr_insn->id;
int new_time = SCHED_TIME (u) + (SCHED_TIME (u) / ii) + 1;
SCHED_TIME (u) = new_time;
crr_insn->cycle = new_time;
SCHED_ROW (u) = new_time % new_ii;
SCHED_STAGE (u) = new_time / new_ii;
}
}
/* Updating ps. */
ps->min_cycle = ps->min_cycle + ps->min_cycle / ii
+ (SMODULO (ps->min_cycle, ii) >= split_row ? 1 : 0);
ps->max_cycle = ps->max_cycle + ps->max_cycle / ii
+ (SMODULO (ps->max_cycle, ii) >= split_row ? 1 : 0);
free (ps->rows);
ps->rows = rows_new;
free (ps->rows_length);
ps->rows_length = rows_length_new;
ps->ii = new_ii;
gcc_assert (ps->min_cycle >= 0);
verify_partial_schedule (ps, sched_nodes);
if (dump_file)
fprintf (dump_file, "min_cycle=%d, max_cycle=%d\n", ps->min_cycle,
ps->max_cycle);
}
/* Given U_NODE which is the node that failed to be scheduled; LOW and
UP which are the boundaries of it's scheduling window; compute using
SCHED_NODES and II a row in the partial schedule that can be split
which will separate a critical predecessor from a critical successor
thereby expanding the window, and return it. */
static int
compute_split_row (sbitmap sched_nodes, int low, int up, int ii,
ddg_node_ptr u_node)
{
ddg_edge_ptr e;
int lower = INT_MIN, upper = INT_MAX;
int crit_pred = -1;
int crit_succ = -1;
int crit_cycle;
for (e = u_node->in; e != 0; e = e->next_in)
{
int v = e->src->cuid;
if (bitmap_bit_p (sched_nodes, v)
&& (low == SCHED_TIME (v) + e->latency - (e->distance * ii)))
if (SCHED_TIME (v) > lower)
{
crit_pred = v;
lower = SCHED_TIME (v);
}
}
if (crit_pred >= 0)
{
crit_cycle = SCHED_TIME (crit_pred) + 1;
return SMODULO (crit_cycle, ii);
}
for (e = u_node->out; e != 0; e = e->next_out)
{
int v = e->dest->cuid;
if (bitmap_bit_p (sched_nodes, v)
&& (up == SCHED_TIME (v) - e->latency + (e->distance * ii)))
if (SCHED_TIME (v) < upper)
{
crit_succ = v;
upper = SCHED_TIME (v);
}
}
if (crit_succ >= 0)
{
crit_cycle = SCHED_TIME (crit_succ);
return SMODULO (crit_cycle, ii);
}
if (dump_file)
fprintf (dump_file, "Both crit_pred and crit_succ are NULL\n");
return SMODULO ((low + up + 1) / 2, ii);
}
static void
verify_partial_schedule (partial_schedule_ptr ps, sbitmap sched_nodes)
{
int row;
ps_insn_ptr crr_insn;
for (row = 0; row < ps->ii; row++)
{
int length = 0;
for (crr_insn = ps->rows[row]; crr_insn; crr_insn = crr_insn->next_in_row)
{
int u = crr_insn->id;
length++;
gcc_assert (bitmap_bit_p (sched_nodes, u));
/* ??? Test also that all nodes of sched_nodes are in ps, perhaps by
popcount (sched_nodes) == number of insns in ps. */
gcc_assert (SCHED_TIME (u) >= ps->min_cycle);
gcc_assert (SCHED_TIME (u) <= ps->max_cycle);
}
gcc_assert (ps->rows_length[row] == length);
}
}
/* This page implements the algorithm for ordering the nodes of a DDG
for modulo scheduling, activated through the
"int sms_order_nodes (ddg_ptr, int mii, int * result)" API. */
#define ORDER_PARAMS(x) ((struct node_order_params *) (x)->aux.info)
#define ASAP(x) (ORDER_PARAMS ((x))->asap)
#define ALAP(x) (ORDER_PARAMS ((x))->alap)
#define HEIGHT(x) (ORDER_PARAMS ((x))->height)
#define MOB(x) (ALAP ((x)) - ASAP ((x)))
#define DEPTH(x) (ASAP ((x)))
typedef struct node_order_params * nopa;
static void order_nodes_of_sccs (ddg_all_sccs_ptr, int * result);
static int order_nodes_in_scc (ddg_ptr, sbitmap, sbitmap, int*, int);
static nopa calculate_order_params (ddg_ptr, int, int *);
static int find_max_asap (ddg_ptr, sbitmap);
static int find_max_hv_min_mob (ddg_ptr, sbitmap);
static int find_max_dv_min_mob (ddg_ptr, sbitmap);
enum sms_direction {BOTTOMUP, TOPDOWN};
struct node_order_params
{
int asap;
int alap;
int height;
};
/* Check if NODE_ORDER contains a permutation of 0 .. NUM_NODES-1. */
static void
check_nodes_order (int *node_order, int num_nodes)
{
int i;
auto_sbitmap tmp (num_nodes);
bitmap_clear (tmp);
if (dump_file)
fprintf (dump_file, "SMS final nodes order: \n");
for (i = 0; i < num_nodes; i++)
{
int u = node_order[i];
if (dump_file)
fprintf (dump_file, "%d ", u);
gcc_assert (u < num_nodes && u >= 0 && !bitmap_bit_p (tmp, u));
bitmap_set_bit (tmp, u);
}
if (dump_file)
fprintf (dump_file, "\n");
}
/* Order the nodes of G for scheduling and pass the result in
NODE_ORDER. Also set aux.count of each node to ASAP.
Put maximal ASAP to PMAX_ASAP. Return the recMII for the given DDG. */
static int
sms_order_nodes (ddg_ptr g, int mii, int * node_order, int *pmax_asap)
{
int i;
int rec_mii = 0;
ddg_all_sccs_ptr sccs = create_ddg_all_sccs (g);
nopa nops = calculate_order_params (g, mii, pmax_asap);
if (dump_file)
print_sccs (dump_file, sccs, g);
order_nodes_of_sccs (sccs, node_order);
if (sccs->num_sccs > 0)
/* First SCC has the largest recurrence_length. */
rec_mii = sccs->sccs[0]->recurrence_length;
/* Save ASAP before destroying node_order_params. */
for (i = 0; i < g->num_nodes; i++)
{
ddg_node_ptr v = &g->nodes[i];
v->aux.count = ASAP (v);
}
free (nops);
free_ddg_all_sccs (sccs);
check_nodes_order (node_order, g->num_nodes);
return rec_mii;
}
static void
order_nodes_of_sccs (ddg_all_sccs_ptr all_sccs, int * node_order)
{
int i, pos = 0;
ddg_ptr g = all_sccs->ddg;
int num_nodes = g->num_nodes;
auto_sbitmap prev_sccs (num_nodes);
auto_sbitmap on_path (num_nodes);
auto_sbitmap tmp (num_nodes);
auto_sbitmap ones (num_nodes);
bitmap_clear (prev_sccs);
bitmap_ones (ones);
/* Perform the node ordering starting from the SCC with the highest recMII.
For each SCC order the nodes according to their ASAP/ALAP/HEIGHT etc. */
for (i = 0; i < all_sccs->num_sccs; i++)
{
ddg_scc_ptr scc = all_sccs->sccs[i];
/* Add nodes on paths from previous SCCs to the current SCC. */
find_nodes_on_paths (on_path, g, prev_sccs, scc->nodes);
bitmap_ior (tmp, scc->nodes, on_path);
/* Add nodes on paths from the current SCC to previous SCCs. */
find_nodes_on_paths (on_path, g, scc->nodes, prev_sccs);
bitmap_ior (tmp, tmp, on_path);
/* Remove nodes of previous SCCs from current extended SCC. */
bitmap_and_compl (tmp, tmp, prev_sccs);
pos = order_nodes_in_scc (g, prev_sccs, tmp, node_order, pos);
/* Above call to order_nodes_in_scc updated prev_sccs |= tmp. */
}
/* Handle the remaining nodes that do not belong to any scc. Each call
to order_nodes_in_scc handles a single connected component. */
while (pos < g->num_nodes)
{
bitmap_and_compl (tmp, ones, prev_sccs);
pos = order_nodes_in_scc (g, prev_sccs, tmp, node_order, pos);
}
}
/* MII is needed if we consider backarcs (that do not close recursive cycles). */
static struct node_order_params *
calculate_order_params (ddg_ptr g, int mii ATTRIBUTE_UNUSED, int *pmax_asap)
{
int u;
int max_asap;
int num_nodes = g->num_nodes;
ddg_edge_ptr e;
/* Allocate a place to hold ordering params for each node in the DDG. */
nopa node_order_params_arr;
/* Initialize of ASAP/ALAP/HEIGHT to zero. */
node_order_params_arr = (nopa) xcalloc (num_nodes,
sizeof (struct node_order_params));
/* Set the aux pointer of each node to point to its order_params structure. */
for (u = 0; u < num_nodes; u++)
g->nodes[u].aux.info = &node_order_params_arr[u];
/* Disregarding a backarc from each recursive cycle to obtain a DAG,
calculate ASAP, ALAP, mobility, distance, and height for each node
in the dependence (direct acyclic) graph. */
/* We assume that the nodes in the array are in topological order. */
max_asap = 0;
for (u = 0; u < num_nodes; u++)
{
ddg_node_ptr u_node = &g->nodes[u];
ASAP (u_node) = 0;
for (e = u_node->in; e; e = e->next_in)
if (e->distance == 0)
ASAP (u_node) = MAX (ASAP (u_node),
ASAP (e->src) + e->latency);
max_asap = MAX (max_asap, ASAP (u_node));
}
for (u = num_nodes - 1; u > -1; u--)
{
ddg_node_ptr u_node = &g->nodes[u];
ALAP (u_node) = max_asap;
HEIGHT (u_node) = 0;
for (e = u_node->out; e; e = e->next_out)
if (e->distance == 0)
{
ALAP (u_node) = MIN (ALAP (u_node),
ALAP (e->dest) - e->latency);
HEIGHT (u_node) = MAX (HEIGHT (u_node),
HEIGHT (e->dest) + e->latency);
}
}
if (dump_file)
{
fprintf (dump_file, "\nOrder params\n");
for (u = 0; u < num_nodes; u++)
{
ddg_node_ptr u_node = &g->nodes[u];
fprintf (dump_file, "node %d, ASAP: %d, ALAP: %d, HEIGHT: %d\n", u,
ASAP (u_node), ALAP (u_node), HEIGHT (u_node));
}
}
*pmax_asap = max_asap;
return node_order_params_arr;
}
static int
find_max_asap (ddg_ptr g, sbitmap nodes)
{
unsigned int u = 0;
int max_asap = -1;
int result = -1;
sbitmap_iterator sbi;
EXECUTE_IF_SET_IN_BITMAP (nodes, 0, u, sbi)
{
ddg_node_ptr u_node = &g->nodes[u];
if (max_asap < ASAP (u_node))
{
max_asap = ASAP (u_node);
result = u;
}
}
return result;
}
static int
find_max_hv_min_mob (ddg_ptr g, sbitmap nodes)
{
unsigned int u = 0;
int max_hv = -1;
int min_mob = INT_MAX;
int result = -1;
sbitmap_iterator sbi;
EXECUTE_IF_SET_IN_BITMAP (nodes, 0, u, sbi)
{
ddg_node_ptr u_node = &g->nodes[u];
if (max_hv < HEIGHT (u_node))
{
max_hv = HEIGHT (u_node);
min_mob = MOB (u_node);
result = u;
}
else if ((max_hv == HEIGHT (u_node))
&& (min_mob > MOB (u_node)))
{
min_mob = MOB (u_node);
result = u;
}
}
return result;
}
static int
find_max_dv_min_mob (ddg_ptr g, sbitmap nodes)
{
unsigned int u = 0;
int max_dv = -1;
int min_mob = INT_MAX;
int result = -1;
sbitmap_iterator sbi;
EXECUTE_IF_SET_IN_BITMAP (nodes, 0, u, sbi)
{
ddg_node_ptr u_node = &g->nodes[u];
if (max_dv < DEPTH (u_node))
{
max_dv = DEPTH (u_node);
min_mob = MOB (u_node);
result = u;
}
else if ((max_dv == DEPTH (u_node))
&& (min_mob > MOB (u_node)))
{
min_mob = MOB (u_node);
result = u;
}
}
return result;
}
/* Places the nodes of SCC into the NODE_ORDER array starting
at position POS, according to the SMS ordering algorithm.
NODES_ORDERED (in&out parameter) holds the bitset of all nodes in
the NODE_ORDER array, starting from position zero. */
static int
order_nodes_in_scc (ddg_ptr g, sbitmap nodes_ordered, sbitmap scc,
int * node_order, int pos)
{
enum sms_direction dir;
int num_nodes = g->num_nodes;
auto_sbitmap workset (num_nodes);
auto_sbitmap tmp (num_nodes);
sbitmap zero_bitmap = sbitmap_alloc (num_nodes);
auto_sbitmap predecessors (num_nodes);
auto_sbitmap successors (num_nodes);
bitmap_clear (predecessors);
find_predecessors (predecessors, g, nodes_ordered);
bitmap_clear (successors);
find_successors (successors, g, nodes_ordered);
bitmap_clear (tmp);
if (bitmap_and (tmp, predecessors, scc))
{
bitmap_copy (workset, tmp);
dir = BOTTOMUP;
}
else if (bitmap_and (tmp, successors, scc))
{
bitmap_copy (workset, tmp);
dir = TOPDOWN;
}
else
{
int u;
bitmap_clear (workset);
if ((u = find_max_asap (g, scc)) >= 0)
bitmap_set_bit (workset, u);
dir = BOTTOMUP;
}
bitmap_clear (zero_bitmap);
while (!bitmap_equal_p (workset, zero_bitmap))
{
int v;
ddg_node_ptr v_node;
sbitmap v_node_preds;
sbitmap v_node_succs;
if (dir == TOPDOWN)
{
while (!bitmap_equal_p (workset, zero_bitmap))
{
v = find_max_hv_min_mob (g, workset);
v_node = &g->nodes[v];
node_order[pos++] = v;
v_node_succs = NODE_SUCCESSORS (v_node);
bitmap_and (tmp, v_node_succs, scc);
/* Don't consider the already ordered successors again. */
bitmap_and_compl (tmp, tmp, nodes_ordered);
bitmap_ior (workset, workset, tmp);
bitmap_clear_bit (workset, v);
bitmap_set_bit (nodes_ordered, v);
}
dir = BOTTOMUP;
bitmap_clear (predecessors);
find_predecessors (predecessors, g, nodes_ordered);
bitmap_and (workset, predecessors, scc);
}
else
{
while (!bitmap_equal_p (workset, zero_bitmap))
{
v = find_max_dv_min_mob (g, workset);
v_node =