/* XCOFF definitions.  These are needed in dbxout.c, final.c,
   and xcoffout.h.
   Copyright (C) 1998-2021 Free Software Foundation, Inc.

This file is part of GCC.

GCC is free software; you can redistribute it and/or modify it under
the terms of the GNU General Public License as published by the Free
Software Foundation; either version 3, or (at your option) any later
version.

GCC is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
for more details.

You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING3.  If not see
<http://www.gnu.org/licenses/>.  */

#ifndef GCC_XCOFFOUT_H
#define GCC_XCOFFOUT_H

/* Tags and typedefs are C_DECL in XCOFF, not C_LSYM.  */

#define DBX_TYPE_DECL_STABS_CODE N_DECL

/* Use the XCOFF predefined type numbers.  */

#define DBX_ASSIGN_FUNDAMENTAL_TYPE_NUMBER(TYPE) \
  xcoff_assign_fundamental_type_number (TYPE)

/* Any type with a negative type index has already been output.  */

#define DBX_TYPE_DEFINED(TYPE) (TYPE_SYMTAB_ADDRESS (TYPE) < 0)

/* Must use N_STSYM for static const variables (those in the text section)
   instead of N_FUN.  */

#define DBX_STATIC_CONST_VAR_CODE N_STSYM

/* For static variables, output code to define the start of a static block.  */

#define DBX_STATIC_BLOCK_START(ASMFILE,CODE)				\
{									\
  if ((CODE) == N_STSYM)						\
    fprintf ((ASMFILE), "\t.bs\t%s[RW]\n", xcoff_private_data_section_name);\
  else if ((CODE) == N_LCSYM)						\
    fprintf ((ASMFILE), "\t.bs\t%s\n", xcoff_bss_section_name);	\
}

/* For static variables, output code to define the end of a static block.  */

#define DBX_STATIC_BLOCK_END(ASMFILE,CODE)				\
{									\
  if ((CODE) == N_STSYM || (CODE) == N_LCSYM)				\
    fputs ("\t.es\n", (ASMFILE));					\
}

/* We must use N_RPYSM instead of N_RSYM for register parameters.  */

#define DBX_REGPARM_STABS_CODE N_RPSYM

/* We must use 'R' instead of 'P' for register parameters.  */

#define DBX_REGPARM_STABS_LETTER 'R'

/* Define our own finish symbol function, since xcoff stabs have their
   own different format.  */

#define DBX_FINISH_STABS(SYM, CODE, LINE, ADDR, LABEL, NUMBER) do {	\
  if (ADDR)								\
    {									\
      /* If we are writing a function name, we must emit a dot in	\
	 order to refer to the function code, not its descriptor.  */	\
      if (CODE == N_FUN)						\
	putc ('.', asm_out_file);					\
									\
      /* If we are writing a function name, we must ensure that		\
	 there is no storage-class suffix on the name.  */		\
      if (CODE == N_FUN && GET_CODE (ADDR) == SYMBOL_REF)		\
	{								\
	  const char *_p = XSTR (ADDR, 0);				\
	  if (*_p == '*')						\
	    fputs (_p+1, asm_out_file);					\
	  else								\
	    for (; *_p != '[' && *_p; _p++)				\
	      putc (*_p != '$' ? *_p : '_', asm_out_file);		\
	}								\
      else								\
	output_addr_const (asm_out_file, ADDR);				\
    }									\
  /* Another special case: N_GSYM always gets the symbol name,		\
     whether or not LABEL or NUMBER are set.  */			\
  else if (CODE == N_GSYM)						\
    assemble_name (asm_out_file, XSTR (XEXP (DECL_RTL (SYM), 0), 0));	\
  else if (LABEL)							\
    assemble_name (asm_out_file, LABEL);				\
  else									\
    dbxout_int (NUMBER);						\
  putc (',', asm_out_file);						\
  dbxout_int (stab_to_sclass (CODE));					\
  fputs (",0\n", asm_out_file);						\
} while (0)

/* These are IBM XCOFF extensions we need to reference in dbxout.c
   and xcoffout.c.  */

/* AIX XCOFF uses this for typedefs.  This can have any value, since it is
   only used for translation into a C_DECL storage class.  */
#ifndef N_DECL
#define N_DECL 0x8c
#endif
/* AIX XCOFF uses this for parameters passed in registers.  This can have
   any value, since it is only used for translation into a C_RPSYM storage
   class.  */
#ifndef N_RPSYM
#define N_RPSYM 0x8e
#endif

/* Name of the current include file.  */

extern const char *xcoff_current_include_file;

/* Names of bss and data sections.  These should be unique names for each
   compilation unit.  */

extern char *xcoff_bss_section_name;
extern char *xcoff_private_data_section_name;
extern char *xcoff_private_rodata_section_name;
extern char *xcoff_tls_data_section_name;
extern char *xcoff_read_only_section_name;

/* Last source file name mentioned in a NOTE insn.  */

extern const char *xcoff_lastfile;

/* Don't write out path name for main source file.  */
#define NO_DBX_MAIN_SOURCE_DIRECTORY 1

/* Write out main source file name using ".file" rather than ".stabs".
   We don't actually do this here, because the assembler gets confused if there
   is more than one .file directive.  rs6000_xcoff_file_start is already
   emitting a .file directory, so we don't output one here also.
   Initialize xcoff_lastfile.  */
#define DBX_OUTPUT_MAIN_SOURCE_FILENAME(FILE,FILENAME) \
  xcoff_lastfile = (FILENAME)

/* If we are still in an include file, its end must be marked.  */
#define DBX_OUTPUT_MAIN_SOURCE_FILE_END(FILE, FILENAME)	\
do {							\
  if (xcoff_current_include_file)			\
    {							\
      fputs ("\t.ei\t", (FILE));			\
      output_quoted_string ((FILE), xcoff_current_include_file);	\
      putc ('\n', (FILE));				\
      xcoff_current_include_file = NULL;		\
    }							\
} while (0)

/* Do not emit any marker for XCOFF until assembler allows XFT_CV.  */
#define NO_DBX_GCC_MARKER

/* XCOFF32 maximum length is 64K; XLC limits to 16K.  */
#define DBX_CONTIN_LENGTH 16384

/* XLC uses '?' as continuation character.  */
#define DBX_CONTIN_CHAR '?'

/* Don't try to use the `x' type-cross-reference character in DBX data.
   Also has the consequence of putting each struct, union or enum
   into a separate .stabs, containing only cross-refs to the others.  */
#define DBX_NO_XREFS

/* We must put stabs in the text section.  If we don't the assembler
   won't handle them correctly; it will sometimes put stabs where gdb
   can't find them.  */

#define DEBUG_SYMS_TEXT

/* Prototype functions in xcoffout.c.  */

extern int stab_to_sclass (int);
extern void xcoffout_begin_prologue (unsigned int, unsigned int, const char *);
extern void xcoffout_begin_block (unsigned, unsigned);
extern void xcoffout_end_epilogue (unsigned int, const char *);
extern void xcoffout_end_function (unsigned int);
extern void xcoffout_end_block (unsigned, unsigned);
extern int xcoff_assign_fundamental_type_number (tree);
extern void xcoffout_declare_function (FILE *, tree, const char *);
extern void xcoffout_source_line (unsigned int, unsigned int, const char *,
				  int, bool);

#endif /* GCC_XCOFFOUT_H */