| /* 128-bit long double support routines for Darwin. |
| Copyright (C) 1993-2021 Free Software Foundation, Inc. |
| |
| This file is part of GCC. |
| |
| GCC is free software; you can redistribute it and/or modify it under |
| the terms of the GNU General Public License as published by the Free |
| Software Foundation; either version 3, or (at your option) any later |
| version. |
| |
| GCC is distributed in the hope that it will be useful, but WITHOUT ANY |
| WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| for more details. |
| |
| Under Section 7 of GPL version 3, you are granted additional |
| permissions described in the GCC Runtime Library Exception, version |
| 3.1, as published by the Free Software Foundation. |
| |
| You should have received a copy of the GNU General Public License and |
| a copy of the GCC Runtime Library Exception along with this program; |
| see the files COPYING3 and COPYING.RUNTIME respectively. If not, see |
| <http://www.gnu.org/licenses/>. */ |
| |
| |
| /* Implementations of floating-point long double basic arithmetic |
| functions called by the IBM C compiler when generating code for |
| PowerPC platforms. In particular, the following functions are |
| implemented: __gcc_qadd, __gcc_qsub, __gcc_qmul, and __gcc_qdiv. |
| Double-double algorithms are based on the paper "Doubled-Precision |
| IEEE Standard 754 Floating-Point Arithmetic" by W. Kahan, February 26, |
| 1987. An alternative published reference is "Software for |
| Doubled-Precision Floating-Point Computations", by Seppo Linnainmaa, |
| ACM TOMS vol 7 no 3, September 1981, pages 272-283. */ |
| |
| /* Each long double is made up of two IEEE doubles. The value of the |
| long double is the sum of the values of the two parts. The most |
| significant part is required to be the value of the long double |
| rounded to the nearest double, as specified by IEEE. For Inf |
| values, the least significant part is required to be one of +0.0 or |
| -0.0. No other requirements are made; so, for example, 1.0 may be |
| represented as (1.0, +0.0) or (1.0, -0.0), and the low part of a |
| NaN is don't-care. |
| |
| This code currently assumes the most significant double is in |
| the lower numbered register or lower addressed memory. */ |
| |
| #if (defined (__MACH__) || defined (__powerpc__) || defined (_AIX)) \ |
| && !defined (__rtems__) \ |
| && (defined (__LONG_DOUBLE_128__) || defined (__FLOAT128_TYPE__)) |
| |
| #define fabs(x) __builtin_fabs(x) |
| #define isless(x, y) __builtin_isless (x, y) |
| #define inf() __builtin_inf() |
| |
| #define unlikely(x) __builtin_expect ((x), 0) |
| |
| #define nonfinite(a) unlikely (! isless (fabs (a), inf ())) |
| |
| /* If we have __float128/_Float128, use __ibm128 instead of long double. On |
| other systems, use long double, because __ibm128 might not have been |
| created. */ |
| #ifdef __FLOAT128__ |
| #define IBM128_TYPE __ibm128 |
| #else |
| #define IBM128_TYPE long double |
| #endif |
| |
| /* Define ALIASNAME as a strong alias for NAME. */ |
| # define strong_alias(name, aliasname) _strong_alias(name, aliasname) |
| # define _strong_alias(name, aliasname) \ |
| extern __typeof (name) aliasname __attribute__ ((alias (#name))); |
| |
| /* All these routines actually take two long doubles as parameters, |
| but GCC currently generates poor code when a union is used to turn |
| a long double into a pair of doubles. */ |
| |
| IBM128_TYPE __gcc_qadd (double, double, double, double); |
| IBM128_TYPE __gcc_qsub (double, double, double, double); |
| IBM128_TYPE __gcc_qmul (double, double, double, double); |
| IBM128_TYPE __gcc_qdiv (double, double, double, double); |
| |
| #if defined __ELF__ && defined SHARED \ |
| && (defined __powerpc64__ || !(defined __linux__ || defined __gnu_hurd__)) |
| /* Provide definitions of the old symbol names to satisfy apps and |
| shared libs built against an older libgcc. To access the _xlq |
| symbols an explicit version reference is needed, so these won't |
| satisfy an unadorned reference like _xlqadd. If dot symbols are |
| not needed, the assembler will remove the aliases from the symbol |
| table. */ |
| __asm__ (".symver __gcc_qadd,_xlqadd@GCC_3.4\n\t" |
| ".symver __gcc_qsub,_xlqsub@GCC_3.4\n\t" |
| ".symver __gcc_qmul,_xlqmul@GCC_3.4\n\t" |
| ".symver __gcc_qdiv,_xlqdiv@GCC_3.4\n\t" |
| ".symver .__gcc_qadd,._xlqadd@GCC_3.4\n\t" |
| ".symver .__gcc_qsub,._xlqsub@GCC_3.4\n\t" |
| ".symver .__gcc_qmul,._xlqmul@GCC_3.4\n\t" |
| ".symver .__gcc_qdiv,._xlqdiv@GCC_3.4"); |
| #endif |
| |
| /* Combine two 'double' values into one 'IBM128_TYPE' and return the result. */ |
| static inline IBM128_TYPE |
| pack_ldouble (double dh, double dl) |
| { |
| #if defined (__LONG_DOUBLE_128__) && defined (__LONG_DOUBLE_IBM128__) \ |
| && !(defined (_SOFT_FLOAT) || defined (__NO_FPRS__)) |
| return __builtin_pack_longdouble (dh, dl); |
| #else |
| union |
| { |
| IBM128_TYPE ldval; |
| double dval[2]; |
| } x; |
| x.dval[0] = dh; |
| x.dval[1] = dl; |
| return x.ldval; |
| #endif |
| } |
| |
| /* Add two 'IBM128_TYPE' values and return the result. */ |
| IBM128_TYPE |
| __gcc_qadd (double a, double aa, double c, double cc) |
| { |
| double xh, xl, z, q, zz; |
| |
| z = a + c; |
| |
| if (nonfinite (z)) |
| { |
| if (fabs (z) != inf()) |
| return z; |
| z = cc + aa + c + a; |
| if (nonfinite (z)) |
| return z; |
| xh = z; /* Will always be DBL_MAX. */ |
| zz = aa + cc; |
| if (fabs(a) > fabs(c)) |
| xl = a - z + c + zz; |
| else |
| xl = c - z + a + zz; |
| } |
| else |
| { |
| q = a - z; |
| zz = q + c + (a - (q + z)) + aa + cc; |
| |
| /* Keep -0 result. */ |
| if (zz == 0.0) |
| return z; |
| |
| xh = z + zz; |
| if (nonfinite (xh)) |
| return xh; |
| |
| xl = z - xh + zz; |
| } |
| return pack_ldouble (xh, xl); |
| } |
| |
| IBM128_TYPE |
| __gcc_qsub (double a, double b, double c, double d) |
| { |
| return __gcc_qadd (a, b, -c, -d); |
| } |
| |
| #ifdef __NO_FPRS__ |
| static double fmsub (double, double, double); |
| #endif |
| |
| IBM128_TYPE |
| __gcc_qmul (double a, double b, double c, double d) |
| { |
| double xh, xl, t, tau, u, v, w; |
| |
| t = a * c; /* Highest order double term. */ |
| |
| if (unlikely (t == 0) /* Preserve -0. */ |
| || nonfinite (t)) |
| return t; |
| |
| /* Sum terms of two highest orders. */ |
| |
| /* Use fused multiply-add to get low part of a * c. */ |
| #ifndef __NO_FPRS__ |
| asm ("fmsub %0,%1,%2,%3" : "=f"(tau) : "f"(a), "f"(c), "f"(t)); |
| #else |
| tau = fmsub (a, c, t); |
| #endif |
| v = a*d; |
| w = b*c; |
| tau += v + w; /* Add in other second-order terms. */ |
| u = t + tau; |
| |
| /* Construct IBM128_TYPE result. */ |
| if (nonfinite (u)) |
| return u; |
| xh = u; |
| xl = (t - u) + tau; |
| return pack_ldouble (xh, xl); |
| } |
| |
| IBM128_TYPE |
| __gcc_qdiv (double a, double b, double c, double d) |
| { |
| double xh, xl, s, sigma, t, tau, u, v, w; |
| |
| t = a / c; /* highest order double term */ |
| |
| if (unlikely (t == 0) /* Preserve -0. */ |
| || nonfinite (t)) |
| return t; |
| |
| /* Finite nonzero result requires corrections to the highest order |
| term. These corrections require the low part of c * t to be |
| exactly represented in double. */ |
| if (fabs (a) <= 0x1p-969) |
| { |
| a *= 0x1p106; |
| b *= 0x1p106; |
| c *= 0x1p106; |
| d *= 0x1p106; |
| } |
| |
| s = c * t; /* (s,sigma) = c*t exactly. */ |
| w = -(-b + d * t); /* Written to get fnmsub for speed, but not |
| numerically necessary. */ |
| |
| /* Use fused multiply-add to get low part of c * t. */ |
| #ifndef __NO_FPRS__ |
| asm ("fmsub %0,%1,%2,%3" : "=f"(sigma) : "f"(c), "f"(t), "f"(s)); |
| #else |
| sigma = fmsub (c, t, s); |
| #endif |
| v = a - s; |
| |
| tau = ((v-sigma)+w)/c; /* Correction to t. */ |
| u = t + tau; |
| |
| /* Construct IBM128_TYPE result. */ |
| if (nonfinite (u)) |
| return u; |
| xh = u; |
| xl = (t - u) + tau; |
| return pack_ldouble (xh, xl); |
| } |
| |
| #if defined (_SOFT_DOUBLE) && defined (__LONG_DOUBLE_128__) |
| |
| IBM128_TYPE __gcc_qneg (double, double); |
| int __gcc_qeq (double, double, double, double); |
| int __gcc_qne (double, double, double, double); |
| int __gcc_qge (double, double, double, double); |
| int __gcc_qle (double, double, double, double); |
| IBM128_TYPE __gcc_stoq (float); |
| IBM128_TYPE __gcc_dtoq (double); |
| float __gcc_qtos (double, double); |
| double __gcc_qtod (double, double); |
| int __gcc_qtoi (double, double); |
| unsigned int __gcc_qtou (double, double); |
| IBM128_TYPE __gcc_itoq (int); |
| IBM128_TYPE __gcc_utoq (unsigned int); |
| |
| extern int __eqdf2 (double, double); |
| extern int __ledf2 (double, double); |
| extern int __gedf2 (double, double); |
| |
| /* Negate 'IBM128_TYPE' value and return the result. */ |
| IBM128_TYPE |
| __gcc_qneg (double a, double aa) |
| { |
| return pack_ldouble (-a, -aa); |
| } |
| |
| /* Compare two 'IBM128_TYPE' values for equality. */ |
| int |
| __gcc_qeq (double a, double aa, double c, double cc) |
| { |
| if (__eqdf2 (a, c) == 0) |
| return __eqdf2 (aa, cc); |
| return 1; |
| } |
| |
| strong_alias (__gcc_qeq, __gcc_qne); |
| |
| /* Compare two 'IBM128_TYPE' values for less than or equal. */ |
| int |
| __gcc_qle (double a, double aa, double c, double cc) |
| { |
| if (__eqdf2 (a, c) == 0) |
| return __ledf2 (aa, cc); |
| return __ledf2 (a, c); |
| } |
| |
| strong_alias (__gcc_qle, __gcc_qlt); |
| |
| /* Compare two 'IBM128_TYPE' values for greater than or equal. */ |
| int |
| __gcc_qge (double a, double aa, double c, double cc) |
| { |
| if (__eqdf2 (a, c) == 0) |
| return __gedf2 (aa, cc); |
| return __gedf2 (a, c); |
| } |
| |
| strong_alias (__gcc_qge, __gcc_qgt); |
| |
| /* Convert single to IBM128_TYPE. */ |
| IBM128_TYPE |
| __gcc_stoq (float a) |
| { |
| return pack_ldouble ((double) a, 0.0); |
| } |
| |
| /* Convert double to IBM128_TYPE. */ |
| IBM128_TYPE |
| __gcc_dtoq (double a) |
| { |
| return pack_ldouble (a, 0.0); |
| } |
| |
| /* Convert IBM128_TYPE to single. */ |
| float |
| __gcc_qtos (double a, double aa __attribute__ ((__unused__))) |
| { |
| return (float) a; |
| } |
| |
| /* Convert IBM128_TYPE to double. */ |
| double |
| __gcc_qtod (double a, double aa __attribute__ ((__unused__))) |
| { |
| return a; |
| } |
| |
| /* Convert IBM128_TYPE to int. */ |
| int |
| __gcc_qtoi (double a, double aa) |
| { |
| double z = a + aa; |
| return (int) z; |
| } |
| |
| /* Convert IBM128_TYPE to unsigned int. */ |
| unsigned int |
| __gcc_qtou (double a, double aa) |
| { |
| double z = a + aa; |
| return (unsigned int) z; |
| } |
| |
| /* Convert int to IBM128_TYPE. */ |
| IBM128_TYPE |
| __gcc_itoq (int a) |
| { |
| return __gcc_dtoq ((double) a); |
| } |
| |
| /* Convert unsigned int to IBM128_TYPE. */ |
| IBM128_TYPE |
| __gcc_utoq (unsigned int a) |
| { |
| return __gcc_dtoq ((double) a); |
| } |
| |
| #endif |
| |
| #ifdef __NO_FPRS__ |
| |
| int __gcc_qunord (double, double, double, double); |
| |
| extern int __eqdf2 (double, double); |
| extern int __unorddf2 (double, double); |
| |
| /* Compare two 'IBM128_TYPE' values for unordered. */ |
| int |
| __gcc_qunord (double a, double aa, double c, double cc) |
| { |
| if (__eqdf2 (a, c) == 0) |
| return __unorddf2 (aa, cc); |
| return __unorddf2 (a, c); |
| } |
| |
| #include "soft-fp/soft-fp.h" |
| #include "soft-fp/double.h" |
| #include "soft-fp/quad.h" |
| |
| /* Compute floating point multiply-subtract with higher (quad) precision. */ |
| static double |
| fmsub (double a, double b, double c) |
| { |
| FP_DECL_EX; |
| FP_DECL_D(A); |
| FP_DECL_D(B); |
| FP_DECL_D(C); |
| FP_DECL_Q(X); |
| FP_DECL_Q(Y); |
| FP_DECL_Q(Z); |
| FP_DECL_Q(U); |
| FP_DECL_Q(V); |
| FP_DECL_D(R); |
| double r; |
| IBM128_TYPE u, x, y, z; |
| |
| FP_INIT_ROUNDMODE; |
| FP_UNPACK_RAW_D (A, a); |
| FP_UNPACK_RAW_D (B, b); |
| FP_UNPACK_RAW_D (C, c); |
| |
| /* Extend double to quad. */ |
| #if _FP_W_TYPE_SIZE < 64 |
| FP_EXTEND(Q,D,4,2,X,A); |
| FP_EXTEND(Q,D,4,2,Y,B); |
| FP_EXTEND(Q,D,4,2,Z,C); |
| #else |
| FP_EXTEND(Q,D,2,1,X,A); |
| FP_EXTEND(Q,D,2,1,Y,B); |
| FP_EXTEND(Q,D,2,1,Z,C); |
| #endif |
| FP_PACK_RAW_Q(x,X); |
| FP_PACK_RAW_Q(y,Y); |
| FP_PACK_RAW_Q(z,Z); |
| FP_HANDLE_EXCEPTIONS; |
| |
| /* Multiply. */ |
| FP_INIT_ROUNDMODE; |
| FP_UNPACK_Q(X,x); |
| FP_UNPACK_Q(Y,y); |
| FP_MUL_Q(U,X,Y); |
| FP_PACK_Q(u,U); |
| FP_HANDLE_EXCEPTIONS; |
| |
| /* Subtract. */ |
| FP_INIT_ROUNDMODE; |
| FP_UNPACK_SEMIRAW_Q(U,u); |
| FP_UNPACK_SEMIRAW_Q(Z,z); |
| FP_SUB_Q(V,U,Z); |
| |
| /* Truncate quad to double. */ |
| #if _FP_W_TYPE_SIZE < 64 |
| V_f[3] &= 0x0007ffff; |
| FP_TRUNC(D,Q,2,4,R,V); |
| #else |
| V_f1 &= 0x0007ffffffffffffL; |
| FP_TRUNC(D,Q,1,2,R,V); |
| #endif |
| FP_PACK_SEMIRAW_D(r,R); |
| FP_HANDLE_EXCEPTIONS; |
| |
| return r; |
| } |
| |
| #endif |
| |
| #endif |