gcc/config/sparc/sysv4.h

/* Target definitions for GNU compiler for Sparc running System V.4
   Copyright (C) 1991, 1992, 1995, 1996 Free Software Foundation, Inc.

   Written by Ron Guilmette (rfg@netcom.com).

This file is part of GNU CC.

GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.

GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING.  If not, write to
the Free Software Foundation, 59 Temple Place - Suite 330,
Boston, MA 02111-1307, USA.  */

#include "sparc/sparc.h"

/* Undefine some symbols which are defined in "sparc.h" but which are
   appropriate only for SunOS 4.x, and not for svr4.  */

#undef WORD_SWITCH_TAKES_ARG
#undef ASM_OUTPUT_SOURCE_LINE
#undef SELECT_SECTION
#undef ASM_DECLARE_FUNCTION_NAME
#undef TEXT_SECTION_ASM_OP
#undef DATA_SECTION_ASM_OP

#include "svr4.h"

/* Undefined some symbols which are defined in "svr4.h" but which are
   appropriate only for typical svr4 systems, but not for the specific
   case of svr4 running on a Sparc.  */

#undef INIT_SECTION_ASM_OP
#undef FINI_SECTION_ASM_OP
#undef CONST_SECTION_ASM_OP
#undef TYPE_OPERAND_FMT
#undef PUSHSECTION_FORMAT
#undef STRING_ASM_OP
#undef COMMON_ASM_OP
#undef SKIP_ASM_OP
#undef SET_ASM_OP	/* Has no equivalent.  See ASM_OUTPUT_DEF below.  */

/* Provide a set of pre-definitions and pre-assertions appropriate for
   the Sparc running svr4.  __svr4__ is our extension.  */

#define CPP_PREDEFINES \
  "-Dsparc -Dunix -D__svr4__ \
   -Asystem(unix) -Asystem(svr4) -Acpu(sparc) -Amachine(sparc) \
   -D__GCC_NEW_VARARGS__"

/* The native assembler can't compute differences between symbols in different
   sections when generating pic code, so we must put jump tables in the
   text section.  */
#define JUMP_TABLES_IN_TEXT_SECTION 1

/* Pass -K to the assembler when PIC.  */
#undef ASM_SPEC
#define ASM_SPEC \
  "%{v:-V} %{Qy:} %{!Qn:-Qy} %{n} %{T} %{Ym,*} %{Yd,*} %{Wa,*:%*} \
   %{fpic:-K PIC} %{fPIC:-K PIC} %(asm_cpu)"

/* Must use data section for relocatable constants when pic.  */
#undef SELECT_RTX_SECTION
#define SELECT_RTX_SECTION(MODE,RTX)		\
{						\
  if (flag_pic && symbolic_operand (RTX))	\
    data_section ();				\
  else						\
    const_section ();				\
}

/* This is the string used to begin an assembly language comment for the
   Sparc/svr4 assembler.  */

#define ASM_COMMENT_START "!"

/* Define the names of various pseudo-op used by the Sparc/svr4 assembler.
   Note that many of these are different from the typical pseudo-ops used
   by most svr4 assemblers.  That is probably due to a (misguided?) attempt
   to keep the Sparc/svr4 assembler somewhat compatible with the Sparc/SunOS
   assembler.  */

#define STRING_ASM_OP		".asciz"
#define COMMON_ASM_OP		".common"
#define SKIP_ASM_OP		".skip"
#define UNALIGNED_INT_ASM_OP	".uaword"
#define UNALIGNED_SHORT_ASM_OP	".uahalf"
#define PUSHSECTION_ASM_OP	".pushsection"
#define POPSECTION_ASM_OP	".popsection"

/* This is defined in sparc.h but is not used by svr4.h.  */
#undef ASM_LONG
#define ASM_LONG ".long"

/* This is the format used to print the second operand of a .type pseudo-op
   for the Sparc/svr4 assembler.  */

#define TYPE_OPERAND_FMT      "#%s"

/* This is the format used to print a .pushsection pseudo-op (and its operand)
   for the Sparc/svr4 assembler.  */

#define PUSHSECTION_FORMAT	"\t%s\t\"%s\"\n"

#undef ASM_OUTPUT_CASE_LABEL
#define ASM_OUTPUT_CASE_LABEL(FILE, PREFIX, NUM, JUMPTABLE)		\
do { ASM_OUTPUT_ALIGN ((FILE), Pmode == SImode ? 2 : 3);		\
     ASM_OUTPUT_INTERNAL_LABEL ((FILE), PREFIX, NUM);			\
   } while (0)

/* This is how to equate one symbol to another symbol.  The syntax used is
   `SYM1=SYM2'.  Note that this is different from the way equates are done
   with most svr4 assemblers, where the syntax is `.set SYM1,SYM2'.  */

#define ASM_OUTPUT_DEF(FILE,LABEL1,LABEL2)				\
 do {	fprintf ((FILE), "\t");						\
	assemble_name (FILE, LABEL1);					\
	fprintf (FILE, " = ");						\
	assemble_name (FILE, LABEL2);					\
	fprintf (FILE, "\n");						\
  } while (0)

/* Define how the Sparc registers should be numbered for Dwarf output.
   The numbering provided here should be compatible with the native
   svr4 SDB debugger in the Sparc/svr4 reference port.  The numbering
   is as follows:

   Assembly name	gcc internal regno	Dwarf regno
   ----------------------------------------------------------
   g0-g7		0-7			0-7
   o0-o7		8-15			8-15
   l0-l7		16-23			16-23
   i0-i7		24-31			24-31
   f0-f31		32-63			40-71
*/

#define DBX_REGISTER_NUMBER(REGNO)					\
  (((REGNO) < 32) ? (REGNO)						\
   : ((REGNO) < 63) ? ((REGNO) + 8)					\
   : (abort (), 0))

/* A set of symbol definitions for assembly pseudo-ops which will
   get us switched to various sections of interest.  These are used
   in all places where we simply want to switch to a section, and
   *not* to push the previous section name onto the assembler's
   section names stack (as we do often in dwarfout.c).  */

#define TEXT_SECTION_ASM_OP	".section\t\".text\""
#define DATA_SECTION_ASM_OP	".section\t\".data\""
#define BSS_SECTION_ASM_OP	".section\t\".bss\""
#define CONST_SECTION_ASM_OP	".section\t\".rodata\""
#define INIT_SECTION_ASM_OP	".section\t\".init\""
#define FINI_SECTION_ASM_OP	".section\t\".fini\""

/* Define the pseudo-ops used to switch to the .ctors and .dtors sections.
 
   Note that we want to give these sections the SHF_WRITE attribute
   because these sections will actually contain data (i.e. tables of
   addresses of functions in the current root executable or shared library
   file) and, in the case of a shared library, the relocatable addresses
   will have to be properly resolved/relocated (and then written into) by
   the dynamic linker when it actually attaches the given shared library
   to the executing process.  (Note that on SVR4, you may wish to use the
   `-z text' option to the ELF linker, when building a shared library, as
   an additional check that you are doing everything right.  But if you do
   use the `-z text' option when building a shared library, you will get
   errors unless the .ctors and .dtors sections are marked as writable
   via the SHF_WRITE attribute.)  */
 
#undef CTORS_SECTION_ASM_OP
#define CTORS_SECTION_ASM_OP    ".section\t\".ctors\",#alloc,#write"
#undef DTORS_SECTION_ASM_OP
#define DTORS_SECTION_ASM_OP    ".section\t\".dtors\",#alloc,#write"

/* A C statement to output something to the assembler file to switch to section
   NAME for object DECL which is either a FUNCTION_DECL, a VAR_DECL or
   NULL_TREE.  Some target formats do not support arbitrary sections.  Do not
   define this macro in such cases.  */

#undef	ASM_OUTPUT_SECTION_NAME	/* Override svr4.h's definition.  */
#define ASM_OUTPUT_SECTION_NAME(FILE, DECL, NAME, RELOC) \
do {									\
  if ((DECL) && TREE_CODE (DECL) == FUNCTION_DECL)			\
    fprintf (FILE, ".section\t\"%s%s\",#alloc,#execinstr\n",		\
	     flag_function_sections ? ".text%" : "", (NAME));		\
  else if ((DECL) && DECL_READONLY_SECTION (DECL, RELOC))		\
    fprintf (FILE, ".section\t\"%s\",#alloc\n", (NAME));		\
  else									\
    fprintf (FILE, ".section\t\"%s\",#alloc,#write\n", (NAME));		\
} while (0)

/* This is how to output assembly code to define a `float' constant.
   We always have to use a .long pseudo-op to do this because the native
   SVR4 ELF assembler is buggy and it generates incorrect values when we
   try to use the .float pseudo-op instead.  */

#undef ASM_OUTPUT_FLOAT
#define ASM_OUTPUT_FLOAT(FILE,VALUE)					\
do { long value;							\
     REAL_VALUE_TO_TARGET_SINGLE ((VALUE), value);			\
     fprintf((FILE), "\t%s\t0x%x\n", ASM_LONG, value);			\
   } while (0)

/* This is how to output assembly code to define a `double' constant.
   We always have to use a pair of .long pseudo-ops to do this because
   the native SVR4 ELF assembler is buggy and it generates incorrect
   values when we try to use the the .double pseudo-op instead.  */

#undef ASM_OUTPUT_DOUBLE
#define ASM_OUTPUT_DOUBLE(FILE,VALUE)					\
do { long value[2];							\
     REAL_VALUE_TO_TARGET_DOUBLE ((VALUE), value);			\
     fprintf((FILE), "\t%s\t0x%x\n", ASM_LONG, value[0]);		\
     fprintf((FILE), "\t%s\t0x%x\n", ASM_LONG, value[1]);		\
   } while (0)

/* This is how to output an assembler line defining a `long double'
   constant.  */

#undef ASM_OUTPUT_LONG_DOUBLE
#define ASM_OUTPUT_LONG_DOUBLE(FILE,VALUE)				\
do { long value[4];							\
     REAL_VALUE_TO_TARGET_LONG_DOUBLE ((VALUE), value);			\
     fprintf((FILE), "\t%s\t0x%x\n", ASM_LONG, value[0]);		\
     fprintf((FILE), "\t%s\t0x%x\n", ASM_LONG, value[1]);		\
     fprintf((FILE), "\t%s\t0x%x\n", ASM_LONG, value[2]);		\
     fprintf((FILE), "\t%s\t0x%x\n", ASM_LONG, value[3]);		\
   } while (0)

/* Output assembler code to FILE to initialize this source file's
   basic block profiling info, if that has not already been done.  */

#undef FUNCTION_BLOCK_PROFILER
#define FUNCTION_BLOCK_PROFILER(FILE, LABELNO)  \
  do { \
    if (TARGET_MEDANY) \
      fprintf (FILE, "\tsethi %%hi(.LLPBX0),%%o0\n\tor %%0,%%lo(.LLPBX0),%%o0\n\tld [%s+%%o0],%%o1\n\ttst %%o1\n\tbne .LLPY%d\n\tadd %%o0,%s,%%o0\n\tcall __bb_init_func\n\tnop\nLPY%d:\n", \
	       MEDANY_BASE_REG, (LABELNO), MEDANY_BASE_REG, (LABELNO)); \
    else \
      fprintf (FILE, "\tsethi %%hi(.LLPBX0),%%o0\n\tld [%%lo(.LLPBX0)+%%o0],%%o1\n\ttst %%o1\n\tbne LPY%d\n\tadd %%o0,%%lo(.LLPBX0),%%o0\n\tcall __bb_init_func\n\tnop\nLPY%d:\n", \
	       (LABELNO), (LABELNO)); \
  } while (0)

/* Output assembler code to FILE to increment the entry-count for
   the BLOCKNO'th basic block in this source file.  */

#undef BLOCK_PROFILER
#define BLOCK_PROFILER(FILE, BLOCKNO) \
{ \
  int blockn = (BLOCKNO); \
  if (TARGET_MEDANY) \
    fprintf (FILE, "\tsethi %%hi(.LLPBX2+%d),%%g1\n\tor %%g1,%%lo(.LLPBX2+%d),%%g1\n\tld [%%g1+%s],%%g2\n\tadd %%g2,1,%%g2\n\tst %%g2,[%%g1+%s]\n", \
	     4 * blockn, 4 * blockn, MEDANY_BASE_REG, MEDANY_BASE_REG); \
  else \
    fprintf (FILE, "\tsethi %%hi(.LLPBX2+%d),%%g1\n\tld [%%lo(.LLPBX2+%d)+%%g1],%%g2\n\
\tadd %%g2,1,%%g2\n\tst %%g2,[%%lo(.LLPBX2+%d)+%%g1]\n", \
	     4 * blockn, 4 * blockn, 4 * blockn); \
}

/* A C statement (sans semicolon) to output to the stdio stream
   FILE the assembler definition of uninitialized global DECL named
   NAME whose size is SIZE bytes and alignment is ALIGN bytes.
   Try to use asm_output_aligned_bss to implement this macro.  */

#undef ASM_OUTPUT_ALIGNED_BSS
#define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \
  asm_output_aligned_bss (FILE, DECL, NAME, SIZE, ALIGN)