| ------------------------------------------------------------------------------ |
| -- -- |
| -- GNAT COMPILER COMPONENTS -- |
| -- -- |
| -- G N A T . C O M M A N D _ L I N E -- |
| -- -- |
| -- S p e c -- |
| -- -- |
| -- Copyright (C) 1999-2014, AdaCore -- |
| -- -- |
| -- GNAT is free software; you can redistribute it and/or modify it under -- |
| -- terms of the GNU General Public License as published by the Free Soft- -- |
| -- ware Foundation; either version 3, or (at your option) any later ver- -- |
| -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- |
| -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- |
| -- or FITNESS FOR A PARTICULAR PURPOSE. -- |
| -- -- |
| -- As a special exception under Section 7 of GPL version 3, you are granted -- |
| -- additional permissions described in the GCC Runtime Library Exception, -- |
| -- version 3.1, as published by the Free Software Foundation. -- |
| -- -- |
| -- You should have received a copy of the GNU General Public License and -- |
| -- a copy of the GCC Runtime Library Exception along with this program; -- |
| -- see the files COPYING3 and COPYING.RUNTIME respectively. If not, see -- |
| -- <http://www.gnu.org/licenses/>. -- |
| -- -- |
| -- GNAT was originally developed by the GNAT team at New York University. -- |
| -- Extensive contributions were provided by Ada Core Technologies Inc. -- |
| -- -- |
| ------------------------------------------------------------------------------ |
| |
| -- High level package for command line parsing and manipulation |
| |
| ---------------------------------------- |
| -- Simple Parsing of the Command Line -- |
| ---------------------------------------- |
| |
| -- This package provides an interface for parsing command line arguments, |
| -- when they are either read from Ada.Command_Line or read from a string list. |
| -- As shown in the example below, one should first retrieve the switches |
| -- (special command line arguments starting with '-' by default) and their |
| -- parameters, and then the rest of the command line arguments. |
| -- |
| -- While it may appear easy to parse the command line arguments with |
| -- Ada.Command_Line, there are in fact lots of special cases to handle in some |
| -- applications. Those are fully managed by GNAT.Command_Line. Among these are |
| -- switches with optional parameters, grouping switches (for instance "-ab" |
| -- might mean the same as "-a -b"), various characters to separate a switch |
| -- and its parameter (or none: "-a 1" and "-a1" are generally the same, which |
| -- can introduce confusion with grouped switches),... |
| -- |
| -- begin |
| -- loop |
| -- case Getopt ("a b: ad") is -- Accepts '-a', '-ad', or '-b argument' |
| -- when ASCII.NUL => exit; |
| |
| -- when 'a' => |
| -- if Full_Switch = "a" then |
| -- Put_Line ("Got a"); |
| -- else |
| -- Put_Line ("Got ad"); |
| -- end if; |
| |
| -- when 'b' => Put_Line ("Got b + " & Parameter); |
| |
| -- when others => |
| -- raise Program_Error; -- cannot occur |
| -- end case; |
| -- end loop; |
| |
| -- loop |
| -- declare |
| -- S : constant String := Get_Argument (Do_Expansion => True); |
| -- begin |
| -- exit when S'Length = 0; |
| -- Put_Line ("Got " & S); |
| -- end; |
| -- end loop; |
| |
| -- exception |
| -- when Invalid_Switch => Put_Line ("Invalid Switch " & Full_Switch); |
| -- when Invalid_Parameter => Put_Line ("No parameter for " & Full_Switch); |
| -- end; |
| |
| -------------- |
| -- Sections -- |
| -------------- |
| |
| -- A more complicated example would involve the use of sections for the |
| -- switches, as for instance in gnatmake. The same command line is used to |
| -- provide switches for several tools. Each tool recognizes its switches by |
| -- separating them with special switches that act as section separators. |
| -- Each section acts as a command line of its own. |
| |
| -- begin |
| -- Initialize_Option_Scan ('-', False, "largs bargs cargs"); |
| -- loop |
| -- -- Same loop as above to get switches and arguments |
| -- end loop; |
| |
| -- Goto_Section ("bargs"); |
| -- loop |
| -- -- Same loop as above to get switches and arguments |
| -- -- The supported switches in Getopt might be different |
| -- end loop; |
| |
| -- Goto_Section ("cargs"); |
| -- loop |
| -- -- Same loop as above to get switches and arguments |
| -- -- The supported switches in Getopt might be different |
| -- end loop; |
| -- end; |
| |
| ------------------------------- |
| -- Parsing a List of Strings -- |
| ------------------------------- |
| |
| -- The examples above show how to parse the command line when the arguments |
| -- are read directly from Ada.Command_Line. However, these arguments can also |
| -- be read from a list of strings. This can be useful in several contexts, |
| -- either because your system does not support Ada.Command_Line, or because |
| -- you are manipulating other tools and creating their command lines by hand, |
| -- or for any other reason. |
| |
| -- To create the list of strings, it is recommended to use |
| -- GNAT.OS_Lib.Argument_String_To_List. |
| |
| -- The example below shows how to get the parameters from such a list. Note |
| -- also the use of '*' to get all the switches, and not report errors when an |
| -- unexpected switch was used by the user |
| |
| -- declare |
| -- Parser : Opt_Parser; |
| -- Args : constant Argument_List_Access := |
| -- GNAT.OS_Lib.Argument_String_To_List ("-g -O1 -Ipath"); |
| -- begin |
| -- Initialize_Option_Scan (Parser, Args); |
| -- while Getopt ("* g O! I=", Parser) /= ASCII.NUL loop |
| -- Put_Line ("Switch " & Full_Switch (Parser) |
| -- & " param=" & Parameter (Parser)); |
| -- end loop; |
| -- Free (Parser); |
| -- end; |
| |
| ------------------------------------------- |
| -- High-Level Command Line Configuration -- |
| ------------------------------------------- |
| |
| -- As shown above, the code is still relatively low-level. For instance, there |
| -- is no way to indicate which switches are related (thus if "-l" and "--long" |
| -- should have the same effect, your code will need to test for both cases). |
| -- Likewise, it is difficult to handle more advanced constructs, like: |
| |
| -- * Specifying -gnatwa is the same as specifying -gnatwu -gnatwv, but |
| -- shorter and more readable |
| |
| -- * All switches starting with -gnatw can be grouped, for instance one |
| -- can write -gnatwcd instead of -gnatwc -gnatwd. |
| -- Of course, this can be combined with the above and -gnatwacd is the |
| -- same as -gnatwc -gnatwd -gnatwu -gnatwv |
| |
| -- * The switch -T is the same as -gnatwAB (same as -gnatwA -gnatwB) |
| |
| -- With the above form of Getopt, you would receive "-gnatwa", "-T" or |
| -- "-gnatwcd" in the examples above, and thus you require additional manual |
| -- parsing of the switch. |
| |
| -- Instead, this package provides the type Command_Line_Configuration, which |
| -- stores all the knowledge above. For instance: |
| |
| -- Config : Command_Line_Configuration; |
| -- Define_Alias (Config, "-gnatwa", "-gnatwu -gnatwv"); |
| -- Define_Prefix (Config, "-gnatw"); |
| -- Define_Alias (Config, "-T", "-gnatwAB"); |
| |
| -- You then need to specify all possible switches in your application by |
| -- calling Define_Switch, for instance: |
| |
| -- Define_Switch (Config, "-gnatwu", Help => "warn on unused entities"); |
| -- Define_Switch (Config, "-gnatwv", Help => "warn on unassigned var"); |
| -- ... |
| |
| -- Specifying the help message is optional, but makes it easy to then call |
| -- the function: |
| |
| -- Display_Help (Config); |
| |
| -- that will display a properly formatted help message for your application, |
| -- listing all possible switches. That way you have a single place in which |
| -- to maintain the list of switches and their meaning, rather than maintaining |
| -- both the string to pass to Getopt and a subprogram to display the help. |
| -- Both will properly stay synchronized. |
| |
| -- Once you have this Config, you just have to call: |
| |
| -- Getopt (Config, Callback'Access); |
| |
| -- to parse the command line. The Callback will be called for each switch |
| -- found on the command line (in the case of our example, that is "-gnatwu" |
| -- and then "-gnatwv", not "-gnatwa" itself). This simplifies command line |
| -- parsing a lot. |
| |
| -- In fact, this can be further automated for the most command case where the |
| -- parameter passed to a switch is stored in a variable in the application. |
| -- When a switch is defined, you only have to indicate where to store the |
| -- value, and let Getopt do the rest. For instance: |
| |
| -- Optimization : aliased Integer; |
| -- Verbose : aliased Boolean; |
| |
| -- Define_Switch (Config, Verbose'Access, |
| -- "-v", Long_Switch => "--verbose", |
| -- Help => "Output extra verbose information"); |
| -- Define_Switch (Config, Optimization'Access, |
| -- "-O?", Help => "Optimization level"); |
| |
| -- Getopt (Config); -- No callback |
| |
| -- Since all switches are handled automatically, we don't even need to pass |
| -- a callback to Getopt. Once getopt has been called, the two variables |
| -- Optimization and Verbose have been properly initialized, either to the |
| -- default value or to the value found on the command line. |
| |
| ------------------------------------------------ |
| -- Creating and Manipulating the Command Line -- |
| ------------------------------------------------ |
| |
| -- This package provides mechanisms to create and modify command lines by |
| -- adding or removing arguments from them. The resulting command line is kept |
| -- as short as possible by coalescing arguments whenever possible. |
| |
| -- Complex command lines can thus be constructed, for example from a GUI |
| -- (although this package does not by itself depend upon any specific GUI |
| -- toolkit). |
| |
| -- Using the configuration defined earlier, one can then construct a command |
| -- line for the tool with: |
| |
| -- Cmd : Command_Line; |
| -- Set_Configuration (Cmd, Config); -- Config created earlier |
| -- Add_Switch (Cmd, "-bar"); |
| -- Add_Switch (Cmd, "-gnatwu"); |
| -- Add_Switch (Cmd, "-gnatwv"); -- will be grouped with the above |
| -- Add_Switch (Cmd, "-T"); |
| |
| -- The resulting command line can be iterated over to get all its switches, |
| -- There are two modes for this iteration: either you want to get the |
| -- shortest possible command line, which would be: |
| |
| -- -bar -gnatwaAB |
| |
| -- or on the other hand you want each individual switch (so that your own |
| -- tool does not have to do further complex processing), which would be: |
| |
| -- -bar -gnatwu -gnatwv -gnatwA -gnatwB |
| |
| -- Of course, we can assume that the tool you want to spawn would understand |
| -- both of these, since they are both compatible with the description we gave |
| -- above. However, the first result is useful if you want to show the user |
| -- what you are spawning (since that keeps the output shorter), and the second |
| -- output is more useful for a tool that would check whether -gnatwu was |
| -- passed (which isn't obvious in the first output). Likewise, the second |
| -- output is more useful if you have a graphical interface since each switch |
| -- can be associated with a widget, and you immediately know whether -gnatwu |
| -- was selected. |
| -- |
| -- Some command line arguments can have parameters, which on a command line |
| -- appear as a separate argument that must immediately follow the switch. |
| -- Since the subprograms in this package will reorganize the switches to group |
| -- them, you need to indicate what is a command line parameter, and what is a |
| -- switch argument. |
| |
| -- This is done by passing an extra argument to Add_Switch, as in: |
| |
| -- Add_Switch (Cmd, "-foo", Parameter => "arg1"); |
| |
| -- This ensures that "arg1" will always be treated as the argument to -foo, |
| -- and will not be grouped with other parts of the command line. |
| |
| with Ada.Command_Line; |
| |
| with GNAT.Directory_Operations; |
| with GNAT.OS_Lib; |
| with GNAT.Regexp; |
| with GNAT.Strings; |
| |
| package GNAT.Command_Line is |
| |
| ------------- |
| -- Parsing -- |
| ------------- |
| |
| type Opt_Parser is private; |
| Command_Line_Parser : constant Opt_Parser; |
| -- This object is responsible for parsing a list of arguments, which by |
| -- default are the standard command line arguments from Ada.Command_Line. |
| -- This is really a pointer to actual data, which must therefore be |
| -- initialized through a call to Initialize_Option_Scan, and must be freed |
| -- with a call to Free. |
| -- |
| -- As a special case, Command_Line_Parser does not need to be either |
| -- initialized or free-ed. |
| |
| procedure Initialize_Option_Scan |
| (Switch_Char : Character := '-'; |
| Stop_At_First_Non_Switch : Boolean := False; |
| Section_Delimiters : String := ""); |
| procedure Initialize_Option_Scan |
| (Parser : out Opt_Parser; |
| Command_Line : GNAT.OS_Lib.Argument_List_Access; |
| Switch_Char : Character := '-'; |
| Stop_At_First_Non_Switch : Boolean := False; |
| Section_Delimiters : String := ""); |
| -- The first procedure resets the internal state of the package to prepare |
| -- to rescan the parameters. It does not need to be called before the |
| -- first use of Getopt (but it could be), but it must be called if you |
| -- want to start rescanning the command line parameters from the start. |
| -- The optional parameter Switch_Char can be used to reset the switch |
| -- character, e.g. to '/' for use in DOS-like systems. |
| -- |
| -- The second subprogram initializes a parser that takes its arguments |
| -- from an array of strings rather than directly from the command line. In |
| -- this case, the parser is responsible for freeing the strings stored in |
| -- Command_Line. If you pass null to Command_Line, this will in fact create |
| -- a second parser for Ada.Command_Line, which doesn't share any data with |
| -- the default parser. This parser must be free'ed. |
| -- |
| -- The optional parameter Stop_At_First_Non_Switch indicates if Getopt is |
| -- to look for switches on the whole command line, or if it has to stop as |
| -- soon as a non-switch argument is found. |
| -- |
| -- Example: |
| -- |
| -- Arguments: my_application file1 -c |
| -- |
| -- If Stop_At_First_Non_Switch is False, then -c will be considered |
| -- as a switch (returned by getopt), otherwise it will be considered |
| -- as a normal argument (returned by Get_Argument). |
| -- |
| -- If Section_Delimiters is set, then every following subprogram |
| -- (Getopt and Get_Argument) will only operate within a section, which |
| -- is delimited by any of these delimiters or the end of the command line. |
| -- |
| -- Example: |
| -- Initialize_Option_Scan (Section_Delimiters => "largs bargs cargs"); |
| -- |
| -- Arguments on command line : my_application -c -bargs -d -e -largs -f |
| -- This line contains three sections, the first one is the default one |
| -- and includes only the '-c' switch, the second one is between -bargs |
| -- and -largs and includes '-d -e' and the last one includes '-f'. |
| |
| procedure Free (Parser : in out Opt_Parser); |
| -- Free the memory used by the parser. Calling this is not mandatory for |
| -- the Command_Line_Parser |
| |
| procedure Goto_Section |
| (Name : String := ""; |
| Parser : Opt_Parser := Command_Line_Parser); |
| -- Change the current section. The next Getopt or Get_Argument will start |
| -- looking at the beginning of the section. An empty name ("") refers to |
| -- the first section between the program name and the first section |
| -- delimiter. If the section does not exist in Section_Delimiters, then |
| -- Invalid_Section is raised. If the section does not appear on the command |
| -- line, then it is treated as an empty section. |
| |
| function Full_Switch |
| (Parser : Opt_Parser := Command_Line_Parser) return String; |
| -- Returns the full name of the last switch found (Getopt only returns the |
| -- first character). Does not include the Switch_Char ('-' by default), |
| -- unless the "*" option of Getopt is used (see below). |
| |
| function Current_Section |
| (Parser : Opt_Parser := Command_Line_Parser) return String; |
| -- Return the name of the current section. |
| -- The list of valid sections is defined through Initialize_Option_Scan |
| |
| function Getopt |
| (Switches : String; |
| Concatenate : Boolean := True; |
| Parser : Opt_Parser := Command_Line_Parser) return Character; |
| -- This function moves to the next switch on the command line (defined as |
| -- switch character followed by a character within Switches, casing being |
| -- significant). The result returned is the first character of the switch |
| -- that is located. If there are no more switches in the current section, |
| -- returns ASCII.NUL. If Concatenate is True (the default), the switches do |
| -- not need to be separated by spaces (they can be concatenated if they do |
| -- not require an argument, e.g. -ab is the same as two separate arguments |
| -- -a -b). |
| -- |
| -- Switches is a string of all the possible switches, separated by |
| -- spaces. A switch can be followed by one of the following characters: |
| -- |
| -- ':' The switch requires a parameter. There can optionally be a space |
| -- on the command line between the switch and its parameter. |
| -- |
| -- '=' The switch requires a parameter. There can either be a '=' or a |
| -- space on the command line between the switch and its parameter. |
| -- |
| -- '!' The switch requires a parameter, but there can be no space on the |
| -- command line between the switch and its parameter. |
| -- |
| -- '?' The switch may have an optional parameter. There can be no space |
| -- between the switch and its argument. |
| -- |
| -- e.g. if Switches has the following value : "a? b", |
| -- The command line can be: |
| -- |
| -- -afoo : -a switch with 'foo' parameter |
| -- -a foo : -a switch and another element on the |
| -- command line 'foo', returned by Get_Argument |
| -- |
| -- Example: if Switches is "-a: -aO:", you can have the following |
| -- command lines: |
| -- |
| -- -aarg : 'a' switch with 'arg' parameter |
| -- -a arg : 'a' switch with 'arg' parameter |
| -- -aOarg : 'aO' switch with 'arg' parameter |
| -- -aO arg : 'aO' switch with 'arg' parameter |
| -- |
| -- Example: |
| -- |
| -- Getopt ("a b: ac ad?") |
| -- |
| -- accept either 'a' or 'ac' with no argument, |
| -- accept 'b' with a required argument |
| -- accept 'ad' with an optional argument |
| -- |
| -- If the first item in switches is '*', then Getopt will catch |
| -- every element on the command line that was not caught by any other |
| -- switch. The character returned by GetOpt is '*', but Full_Switch |
| -- contains the full command line argument, including leading '-' if there |
| -- is one. If this character was not returned, there would be no way of |
| -- knowing whether it is there or not. |
| -- |
| -- Example |
| -- Getopt ("* a b") |
| -- If the command line is '-a -c toto.o -b', Getopt will return |
| -- successively 'a', '*', '*' and 'b', with Full_Switch returning |
| -- "a", "-c", "toto.o", and "b". |
| -- |
| -- When Getopt encounters an invalid switch, it raises the exception |
| -- Invalid_Switch and sets Full_Switch to return the invalid switch. |
| -- When Getopt cannot find the parameter associated with a switch, it |
| -- raises Invalid_Parameter, and sets Full_Switch to return the invalid |
| -- switch. |
| -- |
| -- Note: in case of ambiguity, e.g. switches a ab abc, then the longest |
| -- matching switch is returned. |
| -- |
| -- Arbitrary characters are allowed for switches, although it is |
| -- strongly recommended to use only letters and digits for portability |
| -- reasons. |
| -- |
| -- When Concatenate is False, individual switches need to be separated by |
| -- spaces. |
| -- |
| -- Example |
| -- Getopt ("a b", Concatenate => False) |
| -- If the command line is '-ab', exception Invalid_Switch will be |
| -- raised and Full_Switch will return "ab". |
| |
| function Get_Argument |
| (Do_Expansion : Boolean := False; |
| Parser : Opt_Parser := Command_Line_Parser) return String; |
| -- Returns the next element on the command line that is not a switch. This |
| -- function should not be called before Getopt has returned ASCII.NUL. |
| -- |
| -- If Do_Expansion is True, then the parameter on the command line will |
| -- be considered as a filename with wild cards, and will be expanded. The |
| -- matching file names will be returned one at a time. This is useful in |
| -- non-Unix systems for obtaining normal expansion of wild card references. |
| -- When there are no more arguments on the command line, this function |
| -- returns an empty string. |
| |
| function Parameter |
| (Parser : Opt_Parser := Command_Line_Parser) return String; |
| -- Returns parameter associated with the last switch returned by Getopt. |
| -- If no parameter was associated with the last switch, or no previous call |
| -- has been made to Get_Argument, raises Invalid_Parameter. If the last |
| -- switch was associated with an optional argument and this argument was |
| -- not found on the command line, Parameter returns an empty string. |
| |
| function Separator |
| (Parser : Opt_Parser := Command_Line_Parser) return Character; |
| -- The separator that was between the switch and its parameter. This is |
| -- useful if you want to know exactly what was on the command line. This |
| -- is in general a single character, set to ASCII.NUL if the switch and |
| -- the parameter were concatenated. A space is returned if the switch and |
| -- its argument were in two separate arguments. |
| |
| Invalid_Section : exception; |
| -- Raised when an invalid section is selected by Goto_Section |
| |
| Invalid_Switch : exception; |
| -- Raised when an invalid switch is detected in the command line |
| |
| Invalid_Parameter : exception; |
| -- Raised when a parameter is missing, or an attempt is made to obtain a |
| -- parameter for a switch that does not allow a parameter. |
| |
| ----------------------------------------- |
| -- Expansion of command line arguments -- |
| ----------------------------------------- |
| |
| -- These subprograms take care of of expanding globbing patterns on the |
| -- command line. On Unix, such expansion is done by the shell before your |
| -- application is called. But on Windows you must do this expansion |
| -- yourself. |
| |
| type Expansion_Iterator is limited private; |
| -- Type used during expansion of file names |
| |
| procedure Start_Expansion |
| (Iterator : out Expansion_Iterator; |
| Pattern : String; |
| Directory : String := ""; |
| Basic_Regexp : Boolean := True); |
| -- Initialize a wild card expansion. The next calls to Expansion will |
| -- return the next file name in Directory which match Pattern (Pattern |
| -- is a regular expression, using only the Unix shell and DOS syntax if |
| -- Basic_Regexp is True). When Directory is an empty string, the current |
| -- directory is searched. |
| -- |
| -- Pattern may contain directory separators (as in "src/*/*.ada"). |
| -- Subdirectories of Directory will also be searched, up to one |
| -- hundred levels deep. |
| -- |
| -- When Start_Expansion has been called, function Expansion should |
| -- be called repeatedly until it returns an empty string, before |
| -- Start_Expansion can be called again with the same Expansion_Iterator |
| -- variable. |
| |
| function Expansion (Iterator : Expansion_Iterator) return String; |
| -- Returns the next file in the directory matching the parameters given |
| -- to Start_Expansion and updates Iterator to point to the next entry. |
| -- Returns an empty string when there are no more files. |
| -- |
| -- If Expansion is called again after an empty string has been returned, |
| -- then the exception GNAT.Directory_Operations.Directory_Error is raised. |
| |
| ----------------- |
| -- Configuring -- |
| ----------------- |
| |
| -- The following subprograms are used to manipulate a command line |
| -- represented as a string (for instance "-g -O2"), as well as parsing |
| -- the switches from such a string. They provide high-level configurations |
| -- to define aliases (a switch is equivalent to one or more other switches) |
| -- or grouping of switches ("-gnatyac" is equivalent to "-gnatya" and |
| -- "-gnatyc"). |
| |
| -- See the top of this file for examples on how to use these subprograms |
| |
| type Command_Line_Configuration is private; |
| |
| procedure Define_Section |
| (Config : in out Command_Line_Configuration; |
| Section : String); |
| -- Indicates a new switch section. All switches belonging to the same |
| -- section are ordered together, preceded by the section. They are placed |
| -- at the end of the command line (as in "gnatmake somefile.adb -cargs -g") |
| -- |
| -- The section name should not include the leading '-'. So for instance in |
| -- the case of gnatmake we would use: |
| -- |
| -- Define_Section (Config, "cargs"); |
| -- Define_Section (Config, "bargs"); |
| |
| procedure Define_Alias |
| (Config : in out Command_Line_Configuration; |
| Switch : String; |
| Expanded : String; |
| Section : String := ""); |
| -- Indicates that whenever Switch appears on the command line, it should |
| -- be expanded as Expanded. For instance, for the GNAT compiler switches, |
| -- we would define "-gnatwa" as an alias for "-gnatwcfijkmopruvz", ie some |
| -- default warnings to be activated. |
| -- |
| -- This expansion is only done within the specified section, which must |
| -- have been defined first through a call to [Define_Section]. |
| |
| procedure Define_Prefix |
| (Config : in out Command_Line_Configuration; |
| Prefix : String); |
| -- Indicates that all switches starting with the given prefix should be |
| -- grouped. For instance, for the GNAT compiler we would define "-gnatw" as |
| -- a prefix, so that "-gnatwu -gnatwv" can be grouped into "-gnatwuv" It is |
| -- assumed that the remainder of the switch ("uv") is a set of characters |
| -- whose order is irrelevant. In fact, this package will sort them |
| -- alphabetically. |
| -- |
| -- When grouping switches that accept arguments (for instance "-gnatyL!" |
| -- as the definition, and "-gnatyaL12b" as the command line), only |
| -- numerical arguments are accepted. The above is equivalent to |
| -- "-gnatya -gnatyL12 -gnatyb". |
| |
| procedure Define_Switch |
| (Config : in out Command_Line_Configuration; |
| Switch : String := ""; |
| Long_Switch : String := ""; |
| Help : String := ""; |
| Section : String := ""; |
| Argument : String := "ARG"); |
| -- Indicates a new switch. The format of this switch follows the getopt |
| -- format (trailing ':', '?', etc for defining a switch with parameters). |
| -- |
| -- Switch should also start with the leading '-' (or any other characters). |
| -- If this character is not '-', you need to call Initialize_Option_Scan to |
| -- set the proper character for the parser. |
| -- |
| -- The switches defined in the command_line_configuration object are used |
| -- when ungrouping switches with more that one character after the prefix. |
| -- |
| -- Switch and Long_Switch (when specified) are aliases and can be used |
| -- interchangeably. There is no check that they both take an argument or |
| -- both take no argument. Switch can be set to "*" to indicate that any |
| -- switch is supported (in which case Getopt will return '*', see its |
| -- documentation). |
| -- |
| -- Help is used by the Display_Help procedure to describe the supported |
| -- switches. |
| -- |
| -- In_Section indicates in which section the switch is valid (you need to |
| -- first define the section through a call to Define_Section). |
| -- |
| -- Argument is the name of the argument, as displayed in the automatic |
| -- help message. It is always capitalized for consistency. |
| |
| procedure Define_Switch |
| (Config : in out Command_Line_Configuration; |
| Output : access Boolean; |
| Switch : String := ""; |
| Long_Switch : String := ""; |
| Help : String := ""; |
| Section : String := ""; |
| Value : Boolean := True); |
| -- See Define_Switch for a description of the parameters. |
| -- When the switch is found on the command line, Getopt will set |
| -- Output.all to Value. |
| -- |
| -- Output is always initially set to "not Value", so that if the switch is |
| -- not found on the command line, Output still has a valid value. |
| -- The switch must not take any parameter. |
| -- |
| -- Output must exist at least as long as Config, otherwise an erroneous |
| -- memory access may occur. |
| |
| procedure Define_Switch |
| (Config : in out Command_Line_Configuration; |
| Output : access Integer; |
| Switch : String := ""; |
| Long_Switch : String := ""; |
| Help : String := ""; |
| Section : String := ""; |
| Initial : Integer := 0; |
| Default : Integer := 1; |
| Argument : String := "ARG"); |
| -- See Define_Switch for a description of the parameters. When the |
| -- switch is found on the command line, Getopt will set Output.all to the |
| -- value of the switch's parameter. If the parameter is not an integer, |
| -- Invalid_Parameter is raised. |
| |
| -- Output is always initialized to Initial. If the switch has an optional |
| -- argument which isn't specified by the user, then Output will be set to |
| -- Default. The switch must accept an argument. |
| |
| procedure Define_Switch |
| (Config : in out Command_Line_Configuration; |
| Output : access GNAT.Strings.String_Access; |
| Switch : String := ""; |
| Long_Switch : String := ""; |
| Help : String := ""; |
| Section : String := ""; |
| Argument : String := "ARG"); |
| -- Set Output to the value of the switch's parameter when the switch is |
| -- found on the command line. Output is always initialized to the empty |
| -- string if it does not have a value already (otherwise it is left as is |
| -- so that you can specify the default value directly in the declaration |
| -- of the variable). The switch must accept an argument. |
| |
| procedure Set_Usage |
| (Config : in out Command_Line_Configuration; |
| Usage : String := "[switches] [arguments]"; |
| Help : String := ""; |
| Help_Msg : String := ""); |
| -- Defines the general format of the call to the application, and a short |
| -- help text. These are both displayed by Display_Help. When a non-empty |
| -- Help_Msg is given, it is used by Display_Help instead of the |
| -- automatically generated list of supported switches. |
| |
| procedure Display_Help (Config : Command_Line_Configuration); |
| -- Display the help for the tool (ie its usage, and its supported switches) |
| |
| function Get_Switches |
| (Config : Command_Line_Configuration; |
| Switch_Char : Character := '-'; |
| Section : String := "") return String; |
| -- Get the switches list as expected by Getopt, for a specific section of |
| -- the command line. This list is built using all switches defined |
| -- previously via Define_Switch above. |
| |
| function Section_Delimiters |
| (Config : Command_Line_Configuration) return String; |
| -- Return a string suitable for use in Initialize_Option_Scan |
| |
| procedure Free (Config : in out Command_Line_Configuration); |
| -- Free the memory used by Config |
| |
| type Switch_Handler is access procedure |
| (Switch : String; |
| Parameter : String; |
| Section : String); |
| -- Called when a switch is found on the command line. Switch includes |
| -- any leading '-' that was specified in Define_Switch. This is slightly |
| -- different from the functional version of Getopt above, for which |
| -- Full_Switch omits the first leading '-'. |
| |
| Exit_From_Command_Line : exception; |
| -- Emitted when the program should exit. This is called when Getopt below |
| -- has seen -h, --help or an invalid switch. |
| |
| procedure Getopt |
| (Config : Command_Line_Configuration; |
| Callback : Switch_Handler := null; |
| Parser : Opt_Parser := Command_Line_Parser; |
| Concatenate : Boolean := True); |
| -- Similar to the standard Getopt function. For each switch found on the |
| -- command line, this calls Callback, if the switch is not handled |
| -- automatically. |
| -- |
| -- The list of valid switches are the ones from the configuration. The |
| -- switches that were declared through Define_Switch with an Output |
| -- parameter are never returned (and result in a modification of the Output |
| -- variable). This function will in fact never call [Callback] if all |
| -- switches were handled automatically and there is nothing left to do. |
| -- |
| -- The option Concatenate is identical to the one of the standard Getopt |
| -- function. |
| -- |
| -- This procedure automatically adds -h and --help to the valid switches, |
| -- to display the help message and raises Exit_From_Command_Line. |
| -- If an invalid switch is specified on the command line, this procedure |
| -- will display an error message and raises Invalid_Switch again. |
| -- |
| -- This function automatically expands switches: |
| -- |
| -- If Define_Prefix was called (for instance "-gnaty") and the user |
| -- specifies "-gnatycb" on the command line, then Getopt returns |
| -- "-gnatyc" and "-gnatyb" separately. |
| -- |
| -- If Define_Alias was called (for instance "-gnatya = -gnatycb") then |
| -- the latter is returned (in this case it also expands -gnaty as per |
| -- the above. |
| -- |
| -- The goal is to make handling as easy as possible by leaving as much |
| -- work as possible to this package. |
| -- |
| -- As opposed to the standard Getopt, this one will analyze all sections |
| -- as defined by Define_Section, and automatically jump from one section to |
| -- the next. |
| |
| ------------------------------ |
| -- Generating command lines -- |
| ------------------------------ |
| |
| -- Once the command line configuration has been created, you can build your |
| -- own command line. This will be done in general because you need to spawn |
| -- external tools from your application. |
| |
| -- Although it could be done by concatenating strings, the following |
| -- subprograms will properly take care of grouping switches when possible, |
| -- so as to keep the command line as short as possible. They also provide a |
| -- way to remove a switch from an existing command line. |
| |
| -- For instance: |
| |
| -- declare |
| -- Config : Command_Line_Configuration; |
| -- Line : Command_Line; |
| -- Args : Argument_List_Access; |
| |
| -- begin |
| -- Define_Switch (Config, "-gnatyc"); |
| -- Define_Switch (Config, ...); -- for all valid switches |
| -- Define_Prefix (Config, "-gnaty"); |
| |
| -- Set_Configuration (Line, Config); |
| -- Add_Switch (Line, "-O2"); |
| -- Add_Switch (Line, "-gnatyc"); |
| -- Add_Switch (Line, "-gnatyd"); |
| -- |
| -- Build (Line, Args); |
| -- -- Args is now ["-O2", "-gnatycd"] |
| -- end; |
| |
| type Command_Line is private; |
| |
| procedure Set_Configuration |
| (Cmd : in out Command_Line; |
| Config : Command_Line_Configuration); |
| function Get_Configuration |
| (Cmd : Command_Line) return Command_Line_Configuration; |
| -- Set or retrieve the configuration used for that command line. The Config |
| -- must have been initialized first, by calling one of the Define_Switches |
| -- subprograms. |
| |
| procedure Set_Command_Line |
| (Cmd : in out Command_Line; |
| Switches : String; |
| Getopt_Description : String := ""; |
| Switch_Char : Character := '-'); |
| -- Set the new content of the command line, by replacing the current |
| -- version with Switches. |
| -- |
| -- The parsing of Switches is done through calls to Getopt, by passing |
| -- Getopt_Description as an argument. (A "*" is automatically prepended so |
| -- that all switches and command line arguments are accepted). If a config |
| -- was defined via Set_Configuration, the Getopt_Description parameter will |
| -- be ignored. |
| -- |
| -- To properly handle switches that take parameters, you should document |
| -- them in Getopt_Description. Otherwise, the switch and its parameter will |
| -- be recorded as two separate command line arguments as returned by a |
| -- Command_Line_Iterator (which might be fine depending on your |
| -- application). |
| -- |
| -- If the command line has sections (such as -bargs -cargs), then they |
| -- should be listed in the Sections parameter (as "-bargs -cargs"). |
| -- |
| -- This function can be used to reset Cmd by passing an empty string |
| -- |
| -- If an invalid switch is found on the command line (ie wasn't defined in |
| -- the configuration via Define_Switch), and the configuration wasn't set |
| -- to accept all switches (by defining "*" as a valid switch), then an |
| -- exception Invalid_Switch is raised. The exception message indicates the |
| -- invalid switch. |
| |
| procedure Add_Switch |
| (Cmd : in out Command_Line; |
| Switch : String; |
| Parameter : String := ""; |
| Separator : Character := ASCII.NUL; |
| Section : String := ""; |
| Add_Before : Boolean := False); |
| -- Add a new switch to the command line, and combine/group it with existing |
| -- switches if possible. Nothing is done if the switch already exists with |
| -- the same parameter. |
| -- |
| -- If the Switch takes a parameter, the latter should be specified |
| -- separately, so that the association between the two is always correctly |
| -- recognized even if the order of switches on the command line changes. |
| -- For instance, you should pass "--check=full" as ("--check", "full") so |
| -- that Remove_Switch below can simply take "--check" in parameter. That |
| -- will automatically remove "full" as well. The value of the parameter is |
| -- never modified by this package. |
| -- |
| -- On the other hand, you could decide to simply pass "--check=full" as |
| -- the Switch above, and then pass no parameter. This means that you need |
| -- to pass "--check=full" to Remove_Switch as well. |
| -- |
| -- A Switch with a parameter will never be grouped with another switch to |
| -- avoid ambiguities as to what the parameter applies to. |
| -- |
| -- If the switch is part of a section, then it should be specified so that |
| -- the switch is correctly placed in the command line, and the section |
| -- added if not already present. For example, to add the -g switch into the |
| -- -cargs section, you need to call (Cmd, "-g", Section => "-cargs"). |
| -- |
| -- [Separator], if specified, overrides the separator that was defined |
| -- through Define_Switch. For instance, if the switch was defined as |
| -- "-from:", the separator defaults to a space. But if your application |
| -- uses unusual separators not supported by GNAT.Command_Line (for instance |
| -- it requires ":"), you can specify this separator here. |
| -- |
| -- For instance, |
| -- Add_Switch(Cmd, "-from", "bar", ':') |
| -- |
| -- results in |
| -- -from:bar |
| -- |
| -- rather than the default |
| -- -from bar |
| -- |
| -- Note however that Getopt doesn't know how to handle ":" as a separator. |
| -- So the recommendation is to declare the switch as "-from!" (ie no |
| -- space between the switch and its parameter). Then Getopt will return |
| -- ":bar" as the parameter, and you can trim the ":" in your application. |
| -- |
| -- Invalid_Section is raised if Section was not defined in the |
| -- configuration of the command line. |
| -- |
| -- Add_Before allows insertion of the switch at the beginning of the |
| -- command line. |
| |
| procedure Add_Switch |
| (Cmd : in out Command_Line; |
| Switch : String; |
| Parameter : String := ""; |
| Separator : Character := ASCII.NUL; |
| Section : String := ""; |
| Add_Before : Boolean := False; |
| Success : out Boolean); |
| -- Same as above, returning the status of the operation |
| |
| procedure Remove_Switch |
| (Cmd : in out Command_Line; |
| Switch : String; |
| Remove_All : Boolean := False; |
| Has_Parameter : Boolean := False; |
| Section : String := ""); |
| -- Remove Switch from the command line, and ungroup existing switches if |
| -- necessary. |
| -- |
| -- The actual parameter to the switches are ignored. If for instance |
| -- you are removing "-foo", then "-foo param1" and "-foo param2" can |
| -- be removed. |
| -- |
| -- If Remove_All is True, then all matching switches are removed, otherwise |
| -- only the first matching one is removed. |
| -- |
| -- If Has_Parameter is set to True, then only switches having a parameter |
| -- are removed. |
| -- |
| -- If the switch belongs to a section, then this section should be |
| -- specified: Remove_Switch (Cmd_Line, "-g", Section => "-cargs") called |
| -- on the command line "-g -cargs -g" will result in "-g", while if |
| -- called with (Cmd_Line, "-g") this will result in "-cargs -g". |
| -- If Remove_All is set, then both "-g" will be removed. |
| |
| procedure Remove_Switch |
| (Cmd : in out Command_Line; |
| Switch : String; |
| Remove_All : Boolean := False; |
| Has_Parameter : Boolean := False; |
| Section : String := ""; |
| Success : out Boolean); |
| -- Same as above, reporting the success of the operation (Success is False |
| -- if no switch was removed). |
| |
| procedure Remove_Switch |
| (Cmd : in out Command_Line; |
| Switch : String; |
| Parameter : String; |
| Section : String := ""); |
| -- Remove a switch with a specific parameter. If Parameter is the empty |
| -- string, then only a switch with no parameter will be removed. |
| |
| procedure Free (Cmd : in out Command_Line); |
| -- Free the memory used by Cmd |
| |
| --------------- |
| -- Iteration -- |
| --------------- |
| |
| -- When a command line was created with the above, you can then iterate |
| -- over its contents using the following iterator. |
| |
| type Command_Line_Iterator is private; |
| |
| procedure Start |
| (Cmd : in out Command_Line; |
| Iter : in out Command_Line_Iterator; |
| Expanded : Boolean := False); |
| -- Start iterating over the command line arguments. If Expanded is true, |
| -- then the arguments are not grouped and no alias is used. For instance, |
| -- "-gnatwv" and "-gnatwu" would be returned instead of "-gnatwuv". |
| -- |
| -- The iterator becomes invalid if the command line is changed through a |
| -- call to Add_Switch, Remove_Switch or Set_Command_Line. |
| |
| function Current_Switch (Iter : Command_Line_Iterator) return String; |
| function Is_New_Section (Iter : Command_Line_Iterator) return Boolean; |
| function Current_Section (Iter : Command_Line_Iterator) return String; |
| function Current_Separator (Iter : Command_Line_Iterator) return String; |
| function Current_Parameter (Iter : Command_Line_Iterator) return String; |
| -- Return the current switch and its parameter (or the empty string if |
| -- there is no parameter or the switch was added through Add_Switch |
| -- without specifying the parameter. |
| -- |
| -- Separator is the string that goes between the switch and its separator. |
| -- It could be the empty string if they should be concatenated, or a space |
| -- for instance. When printing, you should not add any other character. |
| |
| function Has_More (Iter : Command_Line_Iterator) return Boolean; |
| -- Return True if there are more switches to be returned |
| |
| procedure Next (Iter : in out Command_Line_Iterator); |
| -- Move to the next switch |
| |
| procedure Build |
| (Line : in out Command_Line; |
| Args : out GNAT.OS_Lib.Argument_List_Access; |
| Expanded : Boolean := False; |
| Switch_Char : Character := '-'); |
| -- This is a wrapper using the Command_Line_Iterator. It provides a simple |
| -- way to get all switches (grouped as much as possible), and possibly |
| -- create an Opt_Parser. |
| -- |
| -- Args must be freed by the caller. |
| -- |
| -- Expanded has the same meaning as in Start. |
| |
| procedure Try_Help; |
| -- Output a message on standard error to indicate how to get the usage for |
| -- the executable. This procedure should only be called when the executable |
| -- accepts switch --help. When this procedure is called by executable xxx, |
| -- the following message is displayed on standard error: |
| -- try "xxx --help" for more information. |
| |
| private |
| |
| Max_Depth : constant := 100; |
| -- Maximum depth of subdirectories |
| |
| Max_Path_Length : constant := 1024; |
| -- Maximum length of relative path |
| |
| type Depth is range 1 .. Max_Depth; |
| |
| type Level is record |
| Name_Last : Natural := 0; |
| Dir : GNAT.Directory_Operations.Dir_Type; |
| end record; |
| |
| type Level_Array is array (Depth) of Level; |
| |
| type Section_Number is new Natural range 0 .. 65534; |
| for Section_Number'Size use 16; |
| |
| type Parameter_Type is record |
| Arg_Num : Positive; |
| First : Positive; |
| Last : Positive; |
| Extra : Character; |
| end record; |
| |
| type Is_Switch_Type is array (Natural range <>) of Boolean; |
| pragma Pack (Is_Switch_Type); |
| |
| type Section_Type is array (Natural range <>) of Section_Number; |
| pragma Pack (Section_Type); |
| |
| type Expansion_Iterator is limited record |
| Start : Positive := 1; |
| -- Position of the first character of the relative path to check against |
| -- the pattern. |
| |
| Dir_Name : String (1 .. Max_Path_Length); |
| |
| Current_Depth : Depth := 1; |
| |
| Levels : Level_Array; |
| |
| Regexp : GNAT.Regexp.Regexp; |
| -- Regular expression built with the pattern |
| |
| Maximum_Depth : Depth := 1; |
| -- The maximum depth of directories, reflecting the number of directory |
| -- separators in the pattern. |
| end record; |
| |
| type Opt_Parser_Data (Arg_Count : Natural) is record |
| Arguments : GNAT.OS_Lib.Argument_List_Access; |
| -- null if reading from the command line |
| |
| The_Parameter : Parameter_Type; |
| The_Separator : Character; |
| The_Switch : Parameter_Type; |
| -- This type and this variable are provided to store the current switch |
| -- and parameter. |
| |
| Is_Switch : Is_Switch_Type (1 .. Arg_Count) := (others => False); |
| -- Indicates wich arguments on the command line are considered not be |
| -- switches or parameters to switches (leaving e.g. filenames,...) |
| |
| Section : Section_Type (1 .. Arg_Count) := (others => 1); |
| -- Contains the number of the section associated with the current |
| -- switch. If this number is 0, then it is a section delimiter, which is |
| -- never returned by GetOpt. |
| |
| Current_Argument : Natural := 1; |
| -- Number of the current argument parsed on the command line |
| |
| Current_Index : Natural := 1; |
| -- Index in the current argument of the character to be processed |
| |
| Current_Section : Section_Number := 1; |
| |
| Expansion_It : aliased Expansion_Iterator; |
| -- When Get_Argument is expanding a file name, this is the iterator used |
| |
| In_Expansion : Boolean := False; |
| -- True if we are expanding a file |
| |
| Switch_Character : Character := '-'; |
| -- The character at the beginning of the command line arguments, |
| -- indicating the beginning of a switch. |
| |
| Stop_At_First : Boolean := False; |
| -- If it is True then Getopt stops at the first non-switch argument |
| end record; |
| |
| Command_Line_Parser_Data : aliased Opt_Parser_Data |
| (Ada.Command_Line.Argument_Count); |
| -- The internal data used when parsing the command line |
| |
| type Opt_Parser is access all Opt_Parser_Data; |
| Command_Line_Parser : constant Opt_Parser := |
| Command_Line_Parser_Data'Access; |
| |
| type Switch_Type is (Switch_Untyped, |
| Switch_Boolean, |
| Switch_Integer, |
| Switch_String); |
| |
| type Switch_Definition (Typ : Switch_Type := Switch_Untyped) is record |
| Switch : GNAT.OS_Lib.String_Access; |
| Long_Switch : GNAT.OS_Lib.String_Access; |
| Section : GNAT.OS_Lib.String_Access; |
| Help : GNAT.OS_Lib.String_Access; |
| |
| Argument : GNAT.OS_Lib.String_Access; |
| -- null if "ARG". |
| -- Name of the argument for this switch. |
| |
| case Typ is |
| when Switch_Untyped => |
| null; |
| when Switch_Boolean => |
| Boolean_Output : access Boolean; |
| Boolean_Value : Boolean; -- will set Output to that value |
| when Switch_Integer => |
| Integer_Output : access Integer; |
| Integer_Initial : Integer; |
| Integer_Default : Integer; |
| when Switch_String => |
| String_Output : access GNAT.Strings.String_Access; |
| end case; |
| end record; |
| type Switch_Definitions is array (Natural range <>) of Switch_Definition; |
| type Switch_Definitions_List is access all Switch_Definitions; |
| -- [Switch] includes the leading '-' |
| |
| type Alias_Definition is record |
| Alias : GNAT.OS_Lib.String_Access; |
| Expansion : GNAT.OS_Lib.String_Access; |
| Section : GNAT.OS_Lib.String_Access; |
| end record; |
| type Alias_Definitions is array (Natural range <>) of Alias_Definition; |
| type Alias_Definitions_List is access all Alias_Definitions; |
| |
| type Command_Line_Configuration_Record is record |
| Prefixes : GNAT.OS_Lib.Argument_List_Access; |
| -- The list of prefixes |
| |
| Sections : GNAT.OS_Lib.Argument_List_Access; |
| -- The list of sections |
| |
| Star_Switch : Boolean := False; |
| -- Whether switches not described in this configuration should be |
| -- returned to the user (True). If False, an exception Invalid_Switch |
| -- is raised. |
| |
| Aliases : Alias_Definitions_List; |
| Usage : GNAT.OS_Lib.String_Access; |
| Help : GNAT.OS_Lib.String_Access; |
| Help_Msg : GNAT.OS_Lib.String_Access; |
| Switches : Switch_Definitions_List; |
| -- List of expected switches (Used when expanding switch groups) |
| end record; |
| type Command_Line_Configuration is access Command_Line_Configuration_Record; |
| |
| type Command_Line is record |
| Config : Command_Line_Configuration; |
| Expanded : GNAT.OS_Lib.Argument_List_Access; |
| |
| Params : GNAT.OS_Lib.Argument_List_Access; |
| -- Parameter for the corresponding switch in Expanded. The first |
| -- character is the separator (or ASCII.NUL if there is no separator). |
| |
| Sections : GNAT.OS_Lib.Argument_List_Access; |
| -- The list of sections |
| |
| Coalesce : GNAT.OS_Lib.Argument_List_Access; |
| Coalesce_Params : GNAT.OS_Lib.Argument_List_Access; |
| Coalesce_Sections : GNAT.OS_Lib.Argument_List_Access; |
| -- Cached version of the command line. This is recomputed every time |
| -- the command line changes. Switches are grouped as much as possible, |
| -- and aliases are used to reduce the length of the command line. The |
| -- parameters are not allocated, they point into Params, so they must |
| -- not be freed. |
| end record; |
| |
| type Command_Line_Iterator is record |
| List : GNAT.OS_Lib.Argument_List_Access; |
| Sections : GNAT.OS_Lib.Argument_List_Access; |
| Params : GNAT.OS_Lib.Argument_List_Access; |
| Current : Natural; |
| end record; |
| |
| end GNAT.Command_Line; |
