Google Git
Sign in
gnu / gcc / 926d9947847a0683cf34de6fc231209747576088 / . / gcc / ada / make.adb
blob: 8fc4763e71c0b54e6adaf5f19144f73c6c2d8dd4 [file] [log] [blame]
------------------------------------------------------------------------------
-- --
-- GNAT COMPILER COMPONENTS --
-- --
-- M A K E --
-- --
-- B o d y --
-- --
-- Copyright (C) 1992-2014, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
-- ware Foundation; either version 3, or (at your option) any later ver- --
-- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
-- for more details. You should have received a copy of the GNU General --
-- Public License distributed with GNAT; see file COPYING3. If not, go to --
-- http://www.gnu.org/licenses for a complete copy of the license. --
-- --
-- GNAT was originally developed by the GNAT team at New York University. --
-- Extensive contributions were provided by Ada Core Technologies Inc. --
-- --
------------------------------------------------------------------------------
with ALI; use ALI;
with ALI.Util; use ALI.Util;
with Csets;
with Debug;
with Errutil;
with Fmap;
with Fname; use Fname;
with Fname.SF; use Fname.SF;
with Fname.UF; use Fname.UF;
with Gnatvsn; use Gnatvsn;
with Hostparm; use Hostparm;
with Makeusg;
with Makeutl; use Makeutl;
with MLib;
with MLib.Prj;
with MLib.Tgt; use MLib.Tgt;
with MLib.Utl;
with Namet; use Namet;
with Opt; use Opt;
with Osint.M; use Osint.M;
with Osint; use Osint;
with Output; use Output;
with Prj; use Prj;
with Prj.Com;
with Prj.Env;
with Prj.Pars;
with Prj.Tree; use Prj.Tree;
with Prj.Util;
with Sdefault;
with SFN_Scan;
with Sinput.P;
with Snames; use Snames;
with Stringt;
pragma Warnings (Off);
with System.HTable;
pragma Warnings (On);
with Switch; use Switch;
with Switch.M; use Switch.M;
with Table;
with Targparm; use Targparm;
with Tempdir;
with Types; use Types;
with Ada.Command_Line; use Ada.Command_Line;
with Ada.Directories;
with Ada.Exceptions; use Ada.Exceptions;
with GNAT.Case_Util; use GNAT.Case_Util;
with GNAT.Command_Line; use GNAT.Command_Line;
with GNAT.Directory_Operations; use GNAT.Directory_Operations;
with GNAT.Dynamic_HTables; use GNAT.Dynamic_HTables;
with GNAT.OS_Lib; use GNAT.OS_Lib;
package body Make is
use ASCII;
-- Make control characters visible
Standard_Library_Package_Body_Name : constant String := "s-stalib.adb";
-- Every program depends on this package, that must then be checked,
-- especially when -f and -a are used.
procedure Kill (Pid : Process_Id; Sig_Num : Integer; Close : Integer);
pragma Import (C, Kill, "__gnat_kill");
-- Called by Sigint_Intercepted to kill all spawned compilation processes
type Sigint_Handler is access procedure;
pragma Convention (C, Sigint_Handler);
procedure Install_Int_Handler (Handler : Sigint_Handler);
pragma Import (C, Install_Int_Handler, "__gnat_install_int_handler");
-- Called by Gnatmake to install the SIGINT handler below
procedure Sigint_Intercepted;
pragma Convention (C, Sigint_Intercepted);
-- Called when the program is interrupted by Ctrl-C to delete the
-- temporary mapping files and configuration pragmas files.
No_Mapping_File : constant Natural := 0;
type Compilation_Data is record
Pid : Process_Id;
Full_Source_File : File_Name_Type;
Lib_File : File_Name_Type;
Source_Unit : Unit_Name_Type;
Full_Lib_File : File_Name_Type;
Lib_File_Attr : aliased File_Attributes;
Mapping_File : Natural := No_Mapping_File;
Project : Project_Id := No_Project;
end record;
-- Data recorded for each compilation process spawned
No_Compilation_Data : constant Compilation_Data :=
(Invalid_Pid, No_File, No_File, No_Unit_Name, No_File, Unknown_Attributes,
No_Mapping_File, No_Project);
type Comp_Data_Arr is array (Positive range <>) of Compilation_Data;
type Comp_Data_Ptr is access Comp_Data_Arr;
Running_Compile : Comp_Data_Ptr;
-- Used to save information about outstanding compilations
Outstanding_Compiles : Natural := 0;
-- Current number of outstanding compiles
-------------------------
-- Note on terminology --
-------------------------
-- In this program, we use the phrase "termination" of a file name to refer
-- to the suffix that appears after the unit name portion. Very often this
-- is simply the extension, but in some cases, the sequence may be more
-- complex, for example in main.1.ada, the termination in this name is
-- ".1.ada" and in main_.ada the termination is "_.ada".
procedure Insert_Project_Sources
(The_Project : Project_Id;
All_Projects : Boolean;
Into_Q : Boolean);
-- If Into_Q is True, insert all sources of the project file(s) that are
-- not already marked into the Q. If Into_Q is False, call Osint.Add_File
-- for the first source, then insert all other sources that are not already
-- marked into the Q. If All_Projects is True, all sources of all projects
-- are concerned; otherwise, only sources of The_Project are concerned,
-- including, if The_Project is an extending project, sources inherited
-- from projects being extended.
Unique_Compile : Boolean := False;
-- Set to True if -u or -U or a project file with no main is used
Unique_Compile_All_Projects : Boolean := False;
-- Set to True if -U is used
Must_Compile : Boolean := False;
-- True if gnatmake is invoked with -f -u and one or several mains on the
-- command line.
Project_Tree : constant Project_Tree_Ref :=
new Project_Tree_Data (Is_Root_Tree => True);
-- The project tree
Main_On_Command_Line : Boolean := False;
-- True if gnatmake is invoked with one or several mains on the command
-- line.
RTS_Specified : String_Access := null;
-- Used to detect multiple --RTS= switches
N_M_Switch : Natural := 0;
-- Used to count -mxxx switches that can affect multilib
-- The 3 following packages are used to store gcc, gnatbind and gnatlink
-- switches found in the project files.
package Gcc_Switches is new Table.Table (
Table_Component_Type => String_Access,
Table_Index_Type => Integer,
Table_Low_Bound => 1,
Table_Initial => 20,
Table_Increment => 100,
Table_Name => "Make.Gcc_Switches");
package Binder_Switches is new Table.Table (
Table_Component_Type => String_Access,
Table_Index_Type => Integer,
Table_Low_Bound => 1,
Table_Initial => 20,
Table_Increment => 100,
Table_Name => "Make.Binder_Switches");
package Linker_Switches is new Table.Table (
Table_Component_Type => String_Access,
Table_Index_Type => Integer,
Table_Low_Bound => 1,
Table_Initial => 20,
Table_Increment => 100,
Table_Name => "Make.Linker_Switches");
-- The following instantiations and variables are necessary to save what
-- is found on the command line, in case there is a project file specified.
package Saved_Gcc_Switches is new Table.Table (
Table_Component_Type => String_Access,
Table_Index_Type => Integer,
Table_Low_Bound => 1,
Table_Initial => 20,
Table_Increment => 100,
Table_Name => "Make.Saved_Gcc_Switches");
package Saved_Binder_Switches is new Table.Table (
Table_Component_Type => String_Access,
Table_Index_Type => Integer,
Table_Low_Bound => 1,
Table_Initial => 20,
Table_Increment => 100,
Table_Name => "Make.Saved_Binder_Switches");
package Saved_Linker_Switches is new Table.Table
(Table_Component_Type => String_Access,
Table_Index_Type => Integer,
Table_Low_Bound => 1,
Table_Initial => 20,
Table_Increment => 100,
Table_Name => "Make.Saved_Linker_Switches");
package Switches_To_Check is new Table.Table (
Table_Component_Type => String_Access,
Table_Index_Type => Integer,
Table_Low_Bound => 1,
Table_Initial => 20,
Table_Increment => 100,
Table_Name => "Make.Switches_To_Check");
package Library_Paths is new Table.Table (
Table_Component_Type => String_Access,
Table_Index_Type => Integer,
Table_Low_Bound => 1,
Table_Initial => 20,
Table_Increment => 100,
Table_Name => "Make.Library_Paths");
package Failed_Links is new Table.Table (
Table_Component_Type => File_Name_Type,
Table_Index_Type => Integer,
Table_Low_Bound => 1,
Table_Initial => 10,
Table_Increment => 100,
Table_Name => "Make.Failed_Links");
package Successful_Links is new Table.Table (
Table_Component_Type => File_Name_Type,
Table_Index_Type => Integer,
Table_Low_Bound => 1,
Table_Initial => 10,
Table_Increment => 100,
Table_Name => "Make.Successful_Links");
package Library_Projs is new Table.Table (
Table_Component_Type => Project_Id,
Table_Index_Type => Integer,
Table_Low_Bound => 1,
Table_Initial => 10,
Table_Increment => 100,
Table_Name => "Make.Library_Projs");
-- Two variables to keep the last binder and linker switch index in tables
-- Binder_Switches and Linker_Switches, before adding switches from the
-- project file (if any) and switches from the command line (if any).
Last_Binder_Switch : Integer := 0;
Last_Linker_Switch : Integer := 0;
Normalized_Switches : Argument_List_Access := new Argument_List (1 .. 10);
Last_Norm_Switch : Natural := 0;
Saved_Maximum_Processes : Natural := 0;
Gnatmake_Switch_Found : Boolean;
-- Set by Scan_Make_Arg. True when the switch is a gnatmake switch.
-- Tested by Add_Switches when switches in package Builder must all be
-- gnatmake switches.
Switch_May_Be_Passed_To_The_Compiler : Boolean;
-- Set by Add_Switches and Switches_Of. True when unrecognized switches
-- are passed to the Ada compiler.
type Arg_List_Ref is access Argument_List;
The_Saved_Gcc_Switches : Arg_List_Ref;
Project_File_Name : String_Access := null;
-- The path name of the main project file, if any
Project_File_Name_Present : Boolean := False;
-- True when -P is used with a space between -P and the project file name
Current_Verbosity : Prj.Verbosity := Prj.Default;
-- Verbosity to parse the project files
Main_Project : Prj.Project_Id := No_Project;
-- The project id of the main project file, if any
Project_Of_Current_Object_Directory : Project_Id := No_Project;
-- The object directory of the project for the last compilation. Avoid
-- calling Change_Dir if the current working directory is already this
-- directory.
Map_File : String_Access := null;
-- Value of switch --create-map-file
-- Packages of project files where unknown attributes are errors
Naming_String : aliased String := "naming";
Builder_String : aliased String := "builder";
Compiler_String : aliased String := "compiler";
Binder_String : aliased String := "binder";
Linker_String : aliased String := "linker";
Gnatmake_Packages : aliased String_List :=
(Naming_String 'Access,
Builder_String 'Access,
Compiler_String 'Access,
Binder_String 'Access,
Linker_String 'Access);
Packages_To_Check_By_Gnatmake : constant String_List_Access :=
Gnatmake_Packages'Access;
procedure Add_Library_Search_Dir
(Path : String;
On_Command_Line : Boolean);
-- Call Add_Lib_Search_Dir with an absolute directory path. If Path is
-- relative path, when On_Command_Line is True, it is relative to the
-- current working directory. When On_Command_Line is False, it is relative
-- to the project directory of the main project.
procedure Add_Source_Search_Dir
(Path : String;
On_Command_Line : Boolean);
-- Call Add_Src_Search_Dir with an absolute directory path. If Path is a
-- relative path, when On_Command_Line is True, it is relative to the
-- current working directory. When On_Command_Line is False, it is relative
-- to the project directory of the main project.
procedure Add_Source_Dir (N : String);
-- Call Add_Src_Search_Dir (output one line when in verbose mode)
procedure Add_Source_Directories is
new Prj.Env.For_All_Source_Dirs (Action => Add_Source_Dir);
procedure Add_Object_Dir (N : String);
-- Call Add_Lib_Search_Dir (output one line when in verbose mode)
procedure Add_Object_Directories is
new Prj.Env.For_All_Object_Dirs (Action => Add_Object_Dir);
procedure Change_To_Object_Directory (Project : Project_Id);
-- Change to the object directory of project Project, if this is not
-- already the current working directory.
type Bad_Compilation_Info is record
File : File_Name_Type;
Unit : Unit_Name_Type;
Found : Boolean;
end record;
-- File is the name of the file for which a compilation failed. Unit is for
-- gnatdist use in order to easily get the unit name of a file when its
-- name is krunched or declared in gnat.adc. Found is False if the
-- compilation failed because the file could not be found.
package Bad_Compilation is new Table.Table (
Table_Component_Type => Bad_Compilation_Info,
Table_Index_Type => Natural,
Table_Low_Bound => 1,
Table_Initial => 20,
Table_Increment => 100,
Table_Name => "Make.Bad_Compilation");
-- Full name of all the source files for which compilation fails
Do_Compile_Step : Boolean := True;
Do_Bind_Step : Boolean := True;
Do_Link_Step : Boolean := True;
-- Flags to indicate what step should be executed. Can be set to False
-- with the switches -c, -b and -l. These flags are reset to True for
-- each invocation of procedure Gnatmake.
Shared_String : aliased String := "-shared";
Force_Elab_Flags_String : aliased String := "-F";
CodePeer_Mode_String : aliased String := "-P";
No_Shared_Switch : aliased Argument_List := (1 .. 0 => null);
Shared_Switch : aliased Argument_List := (1 => Shared_String'Access);
Bind_Shared : Argument_List_Access := No_Shared_Switch'Access;
-- Switch to added in front of gnatbind switches. By default no switch is
-- added. Switch "-shared" is added if there is a non-static Library
-- Project File.
Shared_Libgcc : aliased String := "-shared-libgcc";
No_Shared_Libgcc_Switch : aliased Argument_List := (1 .. 0 => null);
Shared_Libgcc_Switch : aliased Argument_List :=
(1 => Shared_Libgcc'Access);
Link_With_Shared_Libgcc : Argument_List_Access :=
No_Shared_Libgcc_Switch'Access;
procedure Make_Failed (S : String);
-- Delete all temp files created by Gnatmake and call Osint.Fail, with the
-- parameter S (see osint.ads). This is called from the Prj hierarchy and
-- the MLib hierarchy. This subprogram also prints current error messages
-- (i.e. finalizes Errutil).
--------------------------
-- Obsolete Executables --
--------------------------
Executable_Obsolete : Boolean := False;
-- Executable_Obsolete is initially set to False for each executable,
-- and is set to True whenever one of the source of the executable is
-- compiled, or has already been compiled for another executable.
Max_Header : constant := 200;
-- This needs a proper comment, it used to say "arbitrary" that's not an
-- adequate comment ???
type Header_Num is range 1 .. Max_Header;
-- Header_Num for the hash table Obsoleted below
function Hash (F : File_Name_Type) return Header_Num;
-- Hash function for the hash table Obsoleted below
package Obsoleted is new System.HTable.Simple_HTable
(Header_Num => Header_Num,
Element => Boolean,
No_Element => False,
Key => File_Name_Type,
Hash => Hash,
Equal => "=");
-- A hash table to keep all files that have been compiled, to detect
-- if an executable is up to date or not.
procedure Enter_Into_Obsoleted (F : File_Name_Type);
-- Enter a file name, without directory information, into the hash table
-- Obsoleted.
function Is_In_Obsoleted (F : File_Name_Type) return Boolean;
-- Check if a file name, without directory information, has already been
-- entered into the hash table Obsoleted.
type Dependency is record
This : File_Name_Type;
Depends_On : File_Name_Type;
end record;
-- Components of table Dependencies below
package Dependencies is new Table.Table (
Table_Component_Type => Dependency,
Table_Index_Type => Integer,
Table_Low_Bound => 1,
Table_Initial => 20,
Table_Increment => 100,
Table_Name => "Make.Dependencies");
-- A table to keep dependencies, to be able to decide if an executable
-- is obsolete. More explanation needed ???
----------------------------
-- Arguments and Switches --
----------------------------
Arguments : Argument_List_Access;
-- Used to gather the arguments for invocation of the compiler
Last_Argument : Natural := 0;
-- Last index of arguments in Arguments above
Arguments_Project : Project_Id;
-- Project id, if any, of the source to be compiled
Arguments_Path_Name : Path_Name_Type;
-- Full path of the source to be compiled, when Arguments_Project is not
-- No_Project.
Dummy_Switch : constant String_Access := new String'("- ");
-- Used to initialized Prev_Switch in procedure Check
procedure Add_Arguments (Args : Argument_List);
-- Add arguments to global variable Arguments, increasing its size
-- if necessary and adjusting Last_Argument.
function Configuration_Pragmas_Switch
(For_Project : Project_Id) return Argument_List;
-- Return an argument list of one element, if there is a configuration
-- pragmas file to be specified for For_Project,
-- otherwise return an empty argument list.
-------------------
-- Misc Routines --
-------------------
procedure List_Depend;
-- Prints to standard output the list of object dependencies. This list
-- can be used directly in a Makefile. A call to Compile_Sources must
-- precede the call to List_Depend. Also because this routine uses the
-- ALI files that were originally loaded and scanned by Compile_Sources,
-- no additional ALI files should be scanned between the two calls (i.e.
-- between the call to Compile_Sources and List_Depend.)
procedure List_Bad_Compilations;
-- Prints out the list of all files for which the compilation failed
Usage_Needed : Boolean := True;
-- Flag used to make sure Makeusg is call at most once
procedure Usage;
-- Call Makeusg, if Usage_Needed is True.
-- Set Usage_Needed to False.
procedure Debug_Msg (S : String; N : Name_Id);
procedure Debug_Msg (S : String; N : File_Name_Type);
procedure Debug_Msg (S : String; N : Unit_Name_Type);
-- If Debug.Debug_Flag_W is set outputs string S followed by name N
procedure Recursive_Compute_Depth (Project : Project_Id);
-- Compute depth of Project and of the projects it depends on
-----------------------
-- Gnatmake Routines --
-----------------------
subtype Lib_Mark_Type is Byte;
-- Used in Mark_Directory
Ada_Lib_Dir : constant Lib_Mark_Type := 1;
-- Used to mark a directory as a GNAT lib dir
-- Note that the notion of GNAT lib dir is no longer used. The code related
-- to it has not been removed to give an idea on how to use the directory
-- prefix marking mechanism.
-- An Ada library directory is a directory containing ali and object files
-- but no source files for the bodies (the specs can be in the same or some
-- other directory). These directories are specified in the Gnatmake
-- command line with the switch "-Adir" (to specify the spec location -Idir
-- cab be used). Gnatmake skips the missing sources whose ali are in Ada
-- library directories. For an explanation of why Gnatmake behaves that
-- way, see the spec of Make.Compile_Sources. The directory lookup penalty
-- is incurred every single time this routine is called.
procedure Check_Steps;
-- Check what steps (Compile, Bind, Link) must be executed.
-- Set the step flags accordingly.
function In_Ada_Lib_Dir (File : File_Name_Type) return Boolean;
-- Get directory prefix of this file and get lib mark stored in name
-- table for this directory. Then check if an Ada lib mark has been set.
procedure Mark_Directory
(Dir : String;
Mark : Lib_Mark_Type;
On_Command_Line : Boolean);
-- Store the absolute path from Dir in name table and set lib mark as name
-- info to identify Ada libraries.
--
-- If Dir is a relative path, when On_Command_Line is True, it is relative
-- to the current working directory; when On_Command_Line is False, it is
-- relative to the project directory of the main project.
Output_Is_Object : Boolean := True;
-- Set to False when using a switch -S for the compiler
procedure Check_For_S_Switch;
-- Set Output_Is_Object to False when the -S switch is used for the
-- compiler.
function Switches_Of
(Source_File : File_Name_Type;
Project : Project_Id;
In_Package : Package_Id;
Allow_ALI : Boolean) return Variable_Value;
-- Return the switches for the source file in the specified package of a
-- project file. If the Source_File ends with a standard GNAT extension
-- (".ads" or ".adb"), try first the full name, then the name without the
-- extension, then, if Allow_ALI is True, the name with the extension
-- ".ali". If there is no switches for either names, try first Switches
-- (others) then the default switches for Ada. If all failed, return
-- No_Variable_Value.
function Is_In_Object_Directory
(Source_File : File_Name_Type;
Full_Lib_File : File_Name_Type) return Boolean;
-- Check if, when using a project file, the ALI file is in the project
-- directory of the ultimate extending project. If it is not, we ignore
-- the fact that this ALI file is read-only.
procedure Process_Multilib (Env : in out Prj.Tree.Environment);
-- Add appropriate --RTS argument to handle multilib
procedure Resolve_Relative_Names_In_Switches (Current_Work_Dir : String);
-- Resolve all relative paths found in the linker and binder switches,
-- when using project files.
procedure Queue_Library_Project_Sources;
-- For all library project, if the library file does not exist, put all the
-- project sources in the queue, and flag the project so that the library
-- is generated.
procedure Compute_Switches_For_Main
(Main_Source_File : in out File_Name_Type;
Root_Environment : in out Prj.Tree.Environment;
Compute_Builder : Boolean;
Current_Work_Dir : String);
-- Find compiler, binder and linker switches to use for the given main
procedure Compute_Executable
(Main_Source_File : File_Name_Type;
Executable : out File_Name_Type;
Non_Std_Executable : out Boolean);
-- Parse the linker switches and project file to compute the name of the
-- executable to generate.
-- ??? What is the meaning of Non_Std_Executable
procedure Compilation_Phase
(Main_Source_File : File_Name_Type;
Current_Main_Index : Int := 0;
Total_Compilation_Failures : in out Natural;
Stand_Alone_Libraries : in out Boolean;
Executable : File_Name_Type := No_File;
Is_Last_Main : Boolean;
Stop_Compile : out Boolean);
-- Build all source files for a given main file
--
-- Current_Main_Index, if not zero, is the index of the current main unit
-- in its source file.
--
-- Stand_Alone_Libraries is set to True when there are Stand-Alone
-- Libraries, so that gnatbind is invoked with the -F switch to force
-- checking of elaboration flags.
--
-- Stop_Compile is set to true if we should not try to compile any more
-- of the main units
procedure Binding_Phase
(Stand_Alone_Libraries : Boolean := False;
Main_ALI_File : File_Name_Type);
-- Stand_Alone_Libraries should be set to True when there are Stand-Alone
-- Libraries, so that gnatbind is invoked with the -F switch to force
-- checking of elaboration flags.
procedure Library_Phase
(Stand_Alone_Libraries : in out Boolean;
Library_Rebuilt : in out Boolean);
-- Build libraries.
-- Stand_Alone_Libraries is set to True when there are Stand-Alone
-- Libraries, so that gnatbind is invoked with the -F switch to force
-- checking of elaboration flags.
procedure Linking_Phase
(Non_Std_Executable : Boolean := False;
Executable : File_Name_Type := No_File;
Main_ALI_File : File_Name_Type);
-- Perform the link of a single executable. The ali file corresponds
-- to Main_ALI_File. Executable is the file name of an executable.
-- Non_Std_Executable is set to True when there is a possibility that
-- the linker will not choose the correct executable file name.
----------------------------------------------------
-- Compiler, Binder & Linker Data and Subprograms --
----------------------------------------------------
Gcc : String_Access := Program_Name ("gcc", "gnatmake");
Original_Gcc : constant String_Access := Gcc;
-- Original_Gcc is used to check if Gcc has been modified by a switch
-- --GCC=, so that for VM platforms, it is not modified again, as it can
-- result in incorrect error messages if the compiler cannot be found.
Gnatbind : String_Access := Program_Name ("gnatbind", "gnatmake");
Gnatlink : String_Access := Program_Name ("gnatlink", "gnatmake");
-- Default compiler, binder, linker programs
Globalizer : constant String := "codepeer_globalizer";
-- CodePeer globalizer executable name
Saved_Gcc : String_Access := null;
Saved_Gnatbind : String_Access := null;
Saved_Gnatlink : String_Access := null;
-- Given by the command line. Will be used, if non null
Gcc_Path : String_Access :=
GNAT.OS_Lib.Locate_Exec_On_Path (Gcc.all);
Gnatbind_Path : String_Access :=
GNAT.OS_Lib.Locate_Exec_On_Path (Gnatbind.all);
Gnatlink_Path : String_Access :=
GNAT.OS_Lib.Locate_Exec_On_Path (Gnatlink.all);
-- Path for compiler, binder, linker programs, defaulted now for gnatdist.
-- Changed later if overridden on command line.
Globalizer_Path : constant String_Access :=
GNAT.OS_Lib.Locate_Exec_On_Path (Globalizer);
-- Path for CodePeer globalizer
Comp_Flag : constant String_Access := new String'("-c");
Output_Flag : constant String_Access := new String'("-o");
Ada_Flag_1 : constant String_Access := new String'("-x");
Ada_Flag_2 : constant String_Access := new String'("ada");
AdaSCIL_Flag : constant String_Access := new String'("adascil");
No_gnat_adc : constant String_Access := new String'("-gnatA");
GNAT_Flag : constant String_Access := new String'("-gnatpg");
Do_Not_Check_Flag : constant String_Access := new String'("-x");
Object_Suffix : constant String := Get_Target_Object_Suffix.all;
Syntax_Only : Boolean := False;
-- Set to True when compiling with -gnats
Display_Executed_Programs : Boolean := True;
-- Set to True if name of commands should be output on stderr (or on stdout
-- if the Commands_To_Stdout flag was set by use of the -eS switch).
Output_File_Name_Seen : Boolean := False;
-- Set to True after having scanned the file_name for
-- switch "-o file_name"
Object_Directory_Seen : Boolean := False;
-- Set to True after having scanned the object directory for
-- switch "-D obj_dir".
Object_Directory_Path : String_Access := null;
-- The path name of the object directory, set with switch -D
type Make_Program_Type is (None, Compiler, Binder, Linker);
Program_Args : Make_Program_Type := None;
-- Used to indicate if we are scanning gnatmake, gcc, gnatbind, or gnatbind
-- options within the gnatmake command line. Used in Scan_Make_Arg only,
-- but must be global since value preserved from one call to another.
Temporary_Config_File : Boolean := False;
-- Set to True when there is a temporary config file used for a project
-- file, to avoid displaying the -gnatec switch for a temporary file.
procedure Add_Switches
(The_Package : Package_Id;
File_Name : String;
Program : Make_Program_Type;
Unknown_Switches_To_The_Compiler : Boolean := True;
Env : in out Prj.Tree.Environment);
procedure Add_Switch
(S : String_Access;
Program : Make_Program_Type;
Append_Switch : Boolean := True;
And_Save : Boolean := True);
procedure Add_Switch
(S : String;
Program : Make_Program_Type;
Append_Switch : Boolean := True;
And_Save : Boolean := True);
-- Make invokes one of three programs (the compiler, the binder or the
-- linker). For the sake of convenience, some program specific switches
-- can be passed directly on the gnatmake command line. This procedure
-- records these switches so that gnatmake can pass them to the right
-- program. S is the switch to be added at the end of the command line
-- for Program if Append_Switch is True. If Append_Switch is False S is
-- added at the beginning of the command line.
procedure Check
(Source_File : File_Name_Type;
Is_Main_Source : Boolean;
The_Args : Argument_List;
Lib_File : File_Name_Type;
Full_Lib_File : File_Name_Type;
Lib_File_Attr : access File_Attributes;
Read_Only : Boolean;
ALI : out ALI_Id;
O_File : out File_Name_Type;
O_Stamp : out Time_Stamp_Type);
-- Determines whether the library file Lib_File is up-to-date or not. The
-- full name (with path information) of the object file corresponding to
-- Lib_File is returned in O_File. Its time stamp is saved in O_Stamp.
-- ALI is the ALI_Id corresponding to Lib_File. If Lib_File in not
-- up-to-date, then the corresponding source file needs to be recompiled.
-- In this case ALI = No_ALI_Id.
-- Full_Lib_File must be the result of calling Osint.Full_Lib_File_Name on
-- Lib_File. Precomputing it saves system calls. Lib_File_Attr is the
-- initialized attributes of that file, which is also used to save on
-- system calls (it can safely be initialized to Unknown_Attributes).
procedure Check_Linker_Options
(E_Stamp : Time_Stamp_Type;
O_File : out File_Name_Type;
O_Stamp : out Time_Stamp_Type);
-- Checks all linker options for linker files that are newer
-- than E_Stamp. If such objects are found, the youngest object
-- is returned in O_File and its stamp in O_Stamp.
--
-- If no obsolete linker files were found, the first missing
-- linker file is returned in O_File and O_Stamp is empty.
-- Otherwise O_File is No_File.
procedure Collect_Arguments
(Source_File : File_Name_Type;
Is_Main_Source : Boolean;
Args : Argument_List);
-- Collect all arguments for a source to be compiled, including those
-- that come from a project file.
procedure Display (Program : String; Args : Argument_List);
-- Displays Program followed by the arguments in Args if variable
-- Display_Executed_Programs is set. The lower bound of Args must be 1.
procedure Report_Compilation_Failed;
-- Delete all temporary files and fail graciously
-----------------
-- Mapping files
-----------------
type Temp_Path_Names is array (Positive range <>) of Path_Name_Type;
type Temp_Path_Ptr is access Temp_Path_Names;
type Free_File_Indexes is array (Positive range <>) of Positive;
type Free_Indexes_Ptr is access Free_File_Indexes;
type Project_Compilation_Data is record
Mapping_File_Names : Temp_Path_Ptr;
-- The name ids of the temporary mapping files used. This is indexed
-- on the maximum number of compilation processes we will be spawning
-- (-j parameter)
Last_Mapping_File_Names : Natural;
-- Index of the last mapping file created for this project
Free_Mapping_File_Indexes : Free_Indexes_Ptr;
-- Indexes in Mapping_File_Names of the mapping file names that can be
-- reused for subsequent compilations.
Last_Free_Indexes : Natural;
-- Number of mapping files that can be reused
end record;
-- Information necessary when compiling a project
type Project_Compilation_Access is access Project_Compilation_Data;
package Project_Compilation_Htable is new Simple_HTable
(Header_Num => Prj.Header_Num,
Element => Project_Compilation_Access,
No_Element => null,
Key => Project_Id,
Hash => Prj.Hash,
Equal => "=");
Project_Compilation : Project_Compilation_Htable.Instance;
Gnatmake_Mapping_File : String_Access := null;
-- The path name of a mapping file specified by switch -C=
procedure Init_Mapping_File
(Project : Project_Id;
Data : in out Project_Compilation_Data;
File_Index : in out Natural);
-- Create a new temporary mapping file, and fill it with the project file
-- mappings, when using project file(s). The out parameter File_Index is
-- the index to the name of the file in the array The_Mapping_File_Names.
-------------------------------------------------
-- Subprogram declarations moved from the spec --
-------------------------------------------------
procedure Bind (ALI_File : File_Name_Type; Args : Argument_List);
-- Binds ALI_File. Args are the arguments to pass to the binder.
-- Args must have a lower bound of 1.
procedure Display_Commands (Display : Boolean := True);
-- The default behavior of Make commands (Compile_Sources, Bind, Link)
-- is to display them on stderr. This behavior can be changed repeatedly
-- by invoking this procedure.
-- If a compilation, bind or link failed one of the following 3 exceptions
-- is raised. These need to be handled by the calling routines.
procedure Compile_Sources
(Main_Source : File_Name_Type;
Args : Argument_List;
First_Compiled_File : out File_Name_Type;
Most_Recent_Obj_File : out File_Name_Type;
Most_Recent_Obj_Stamp : out Time_Stamp_Type;
Main_Unit : out Boolean;
Compilation_Failures : out Natural;
Main_Index : Int := 0;
Check_Readonly_Files : Boolean := False;
Do_Not_Execute : Boolean := False;
Force_Compilations : Boolean := False;
Keep_Going : Boolean := False;
In_Place_Mode : Boolean := False;
Initialize_ALI_Data : Boolean := True;
Max_Process : Positive := 1);
-- Compile_Sources will recursively compile all the sources needed by
-- Main_Source. Before calling this routine make sure Namet has been
-- initialized. This routine can be called repeatedly with different
-- Main_Source file as long as all the source (-I flags), library
-- (-B flags) and ada library (-A flags) search paths between calls are
-- *exactly* the same. The default directory must also be the same.
--
-- Args contains the arguments to use during the compilations.
-- The lower bound of Args must be 1.
--
-- First_Compiled_File is set to the name of the first file that is
-- compiled or that needs to be compiled. This is set to No_Name if no
-- compilations were needed.
--
-- Most_Recent_Obj_File is set to the full name of the most recent
-- object file found when no compilations are needed, that is when
-- First_Compiled_File is set to No_Name. When First_Compiled_File
-- is set then Most_Recent_Obj_File is set to No_Name.
--
-- Most_Recent_Obj_Stamp is the time stamp of Most_Recent_Obj_File.
--
-- Main_Unit is set to True if Main_Source can be a main unit.
-- If Do_Not_Execute is False and First_Compiled_File /= No_Name
-- the value of Main_Unit is always False.
-- Is this used any more??? It is certainly not used by gnatmake???
--
-- Compilation_Failures is a count of compilation failures. This count
-- is used to extract compilation failure reports with Extract_Failure.
--
-- Main_Index, when not zero, is the index of the main unit in source
-- file Main_Source which is a multi-unit source.
-- Zero indicates that Main_Source is a single unit source file.
--
-- Check_Readonly_Files set it to True to compile source files
-- which library files are read-only. When compiling GNAT predefined
-- files the "-gnatg" flag is used.
--
-- Do_Not_Execute set it to True to find out the first source that
-- needs to be recompiled, but without recompiling it. This file is
-- saved in First_Compiled_File.
--
-- Force_Compilations forces all compilations no matter what but
-- recompiles read-only files only if Check_Readonly_Files
-- is set.
--
-- Keep_Going when True keep compiling even in the presence of
-- compilation errors.
--
-- In_Place_Mode when True save library/object files in their object
-- directory if they already exist; otherwise, in the source directory.
--
-- Initialize_ALI_Data set it to True when you want to initialize ALI
-- data-structures. This is what you should do most of the time.
-- (especially the first time around when you call this routine).
-- This parameter is set to False to preserve previously recorded
-- ALI file data.
--
-- Max_Process is the maximum number of processes that should be spawned
-- to carry out compilations.
--
-- Flags in Package Opt Affecting Compile_Sources
-- -----------------------------------------------
--
-- Check_Object_Consistency set it to False to omit all consistency
-- checks between an .ali file and its corresponding object file.
-- When this flag is set to true, every time an .ali is read,
-- package Osint checks that the corresponding object file
-- exists and is more recent than the .ali.
--
-- Use of Name Table Info
-- ----------------------
--
-- All file names manipulated by Compile_Sources are entered into the
-- Names table. The Byte field of a source file is used to mark it.
--
-- Calling Compile_Sources Several Times
-- -------------------------------------
--
-- Upon return from Compile_Sources all the ALI data structures are left
-- intact for further browsing. HOWEVER upon entry to this routine ALI
-- data structures are re-initialized if parameter Initialize_ALI_Data
-- above is set to true. Typically this is what you want the first time
-- you call Compile_Sources. You should not load an ali file, call this
-- routine with flag Initialize_ALI_Data set to True and then expect
-- that ALI information to be around after the call. Note that the first
-- time you call Compile_Sources you better set Initialize_ALI_Data to
-- True unless you have called Initialize_ALI yourself.
--
-- Compile_Sources ALGORITHM : Compile_Sources (Main_Source)
-- -------------------------
--
-- 1. Insert Main_Source in a Queue (Q) and mark it.
--
-- 2. Let unit.adb be the file at the head of the Q. If unit.adb is
-- missing but its corresponding ali file is in an Ada library directory
-- (see below) then, remove unit.adb from the Q and goto step 4.
-- Otherwise, look at the files under the D (dependency) section of
-- unit.ali. If unit.ali does not exist or some of the time stamps do
-- not match, (re)compile unit.adb.
--
-- An Ada library directory is a directory containing Ada specs, ali
-- and object files but no source files for the bodies. An Ada library
-- directory is communicated to gnatmake by means of some switch so that
-- gnatmake can skip the sources whole ali are in that directory.
-- There are two reasons for skipping the sources in this case. Firstly,
-- Ada libraries typically come without full sources but binding and
-- linking against those libraries is still possible. Secondly, it would
-- be very wasteful for gnatmake to systematically check the consistency
-- of every external Ada library used in a program. The binder is
-- already in charge of catching any potential inconsistencies.
--
-- 3. Look into the W section of unit.ali and insert into the Q all
-- unmarked source files. Mark all files newly inserted in the Q.
-- Specifically, assuming that the W section looks like
--
-- W types%s types.adb types.ali
-- W unchecked_deallocation%s
-- W xref_tab%s xref_tab.adb xref_tab.ali
--
-- Then xref_tab.adb and types.adb are inserted in the Q if they are not
-- already marked.
-- Note that there is no file listed under W unchecked_deallocation%s
-- so no generic body should ever be explicitly compiled (unless the
-- Main_Source at the start was a generic body).
--
-- 4. Repeat steps 2 and 3 above until the Q is empty
--
-- Note that the above algorithm works because the units withed in
-- subunits are transitively included in the W section (with section) of
-- the main unit. Likewise the withed units in a generic body needed
-- during a compilation are also transitively included in the W section
-- of the originally compiled file.
procedure Globalize (Success : out Boolean);
-- Call the CodePeer globalizer on all the project's object directories,
-- or on the current directory if no projects.
procedure Initialize
(Project_Node_Tree : out Project_Node_Tree_Ref;
Env : out Prj.Tree.Environment);
-- Performs default and package initialization. Therefore,
-- Compile_Sources can be called by an external unit.
procedure Link
(ALI_File : File_Name_Type;
Args : Argument_List;
Success : out Boolean);
-- Links ALI_File. Args are the arguments to pass to the linker.
-- Args must have a lower bound of 1. Success indicates if the link
-- succeeded or not.
procedure Scan_Make_Arg
(Env : in out Prj.Tree.Environment;
Argv : String;
And_Save : Boolean);
-- Scan make arguments. Argv is a single argument to be processed.
-- Project_Node_Tree will be used to initialize external references. It
-- must have been initialized.
-------------------
-- Add_Arguments --
-------------------
procedure Add_Arguments (Args : Argument_List) is
begin
if Arguments = null then
Arguments := new Argument_List (1 .. Args'Length + 10);
else
while Last_Argument + Args'Length > Arguments'Last loop
declare
New_Arguments : constant Argument_List_Access :=
new Argument_List (1 .. Arguments'Last * 2);
begin
New_Arguments (1 .. Last_Argument) :=
Arguments (1 .. Last_Argument);
Arguments := New_Arguments;
end;
end loop;
end if;
Arguments (Last_Argument + 1 .. Last_Argument + Args'Length) := Args;
Last_Argument := Last_Argument + Args'Length;
end Add_Arguments;
-- --------------------
-- -- Add_Dependency --
-- --------------------
--
-- procedure Add_Dependency (S : File_Name_Type; On : File_Name_Type) is
-- begin
-- Dependencies.Increment_Last;
-- Dependencies.Table (Dependencies.Last) := (S, On);
-- end Add_Dependency;
----------------------------
-- Add_Library_Search_Dir --
----------------------------
procedure Add_Library_Search_Dir
(Path : String;
On_Command_Line : Boolean)
is
begin
if On_Command_Line then
Add_Lib_Search_Dir (Normalize_Pathname (Path));
else
Get_Name_String (Main_Project.Directory.Display_Name);
Add_Lib_Search_Dir
(Normalize_Pathname (Path, Name_Buffer (1 .. Name_Len)));
end if;
end Add_Library_Search_Dir;
--------------------
-- Add_Object_Dir --
--------------------
procedure Add_Object_Dir (N : String) is
begin
Add_Lib_Search_Dir (N);
if Verbose_Mode then
Write_Str ("Adding object directory """);
Write_Str (N);
Write_Str (""".");
Write_Eol;
end if;
end Add_Object_Dir;
--------------------
-- Add_Source_Dir --
--------------------
procedure Add_Source_Dir (N : String) is
begin
Add_Src_Search_Dir (N);
if Verbose_Mode then
Write_Str ("Adding source directory """);
Write_Str (N);
Write_Str (""".");
Write_Eol;
end if;
end Add_Source_Dir;
---------------------------
-- Add_Source_Search_Dir --
---------------------------
procedure Add_Source_Search_Dir
(Path : String;
On_Command_Line : Boolean)
is
begin
if On_Command_Line then
Add_Src_Search_Dir (Normalize_Pathname (Path));
else
Get_Name_String (Main_Project.Directory.Display_Name);
Add_Src_Search_Dir
(Normalize_Pathname (Path, Name_Buffer (1 .. Name_Len)));
end if;
end Add_Source_Search_Dir;
----------------
-- Add_Switch --
----------------
procedure Add_Switch
(S : String_Access;
Program : Make_Program_Type;
Append_Switch : Boolean := True;
And_Save : Boolean := True)
is
generic
with package T is new Table.Table (<>);
procedure Generic_Position (New_Position : out Integer);
-- Generic procedure that chooses a position for S in T at the
-- beginning or the end, depending on the boolean Append_Switch.
-- Calling this procedure may expand the table.
----------------------
-- Generic_Position --
----------------------
procedure Generic_Position (New_Position : out Integer) is
begin
T.Increment_Last;
if Append_Switch then
New_Position := Integer (T.Last);
else
for J in reverse T.Table_Index_Type'Succ (T.First) .. T.Last loop
T.Table (J) := T.Table (T.Table_Index_Type'Pred (J));
end loop;
New_Position := Integer (T.First);
end if;
end Generic_Position;
procedure Gcc_Switches_Pos is new Generic_Position (Gcc_Switches);
procedure Binder_Switches_Pos is new Generic_Position (Binder_Switches);
procedure Linker_Switches_Pos is new Generic_Position (Linker_Switches);
procedure Saved_Gcc_Switches_Pos is new
Generic_Position (Saved_Gcc_Switches);
procedure Saved_Binder_Switches_Pos is new
Generic_Position (Saved_Binder_Switches);
procedure Saved_Linker_Switches_Pos is new
Generic_Position (Saved_Linker_Switches);
New_Position : Integer;
-- Start of processing for Add_Switch
begin
if And_Save then
case Program is
when Compiler =>
Saved_Gcc_Switches_Pos (New_Position);
Saved_Gcc_Switches.Table (New_Position) := S;
when Binder =>
Saved_Binder_Switches_Pos (New_Position);
Saved_Binder_Switches.Table (New_Position) := S;
when Linker =>
Saved_Linker_Switches_Pos (New_Position);
Saved_Linker_Switches.Table (New_Position) := S;
when None =>
raise Program_Error;
end case;
else
case Program is
when Compiler =>
Gcc_Switches_Pos (New_Position);
Gcc_Switches.Table (New_Position) := S;
when Binder =>
Binder_Switches_Pos (New_Position);
Binder_Switches.Table (New_Position) := S;
when Linker =>
Linker_Switches_Pos (New_Position);
Linker_Switches.Table (New_Position) := S;
when None =>
raise Program_Error;
end case;
end if;
end Add_Switch;
procedure Add_Switch
(S : String;
Program : Make_Program_Type;
Append_Switch : Boolean := True;
And_Save : Boolean := True)
is
begin
Add_Switch (S => new String'(S),
Program => Program,
Append_Switch => Append_Switch,
And_Save => And_Save);
end Add_Switch;
------------------
-- Add_Switches --
------------------
procedure Add_Switches
(The_Package : Package_Id;
File_Name : String;
Program : Make_Program_Type;
Unknown_Switches_To_The_Compiler : Boolean := True;
Env : in out Prj.Tree.Environment)
is
Switches : Variable_Value;
Switch_List : String_List_Id;
Element : String_Element;
begin
Switch_May_Be_Passed_To_The_Compiler :=
Unknown_Switches_To_The_Compiler;
if File_Name'Length > 0 then
Name_Len := 0;
Add_Str_To_Name_Buffer (File_Name);
Switches :=
Switches_Of
(Source_File => Name_Find,
Project => Main_Project,
In_Package => The_Package,
Allow_ALI => Program = Binder or else Program = Linker);
if Switches.Kind = List then
Program_Args := Program;
Switch_List := Switches.Values;
while Switch_List /= Nil_String loop
Element :=
Project_Tree.Shared.String_Elements.Table (Switch_List);
Get_Name_String (Element.Value);
if Name_Len > 0 then
declare
Argv : constant String := Name_Buffer (1 .. Name_Len);
-- We need a copy, because Name_Buffer may be modified
begin
if Verbose_Mode then
Write_Str (" Adding ");
Write_Line (Argv);
end if;
Scan_Make_Arg (Env, Argv, And_Save => False);
if not Gnatmake_Switch_Found
and then not Switch_May_Be_Passed_To_The_Compiler
then
Errutil.Error_Msg
('"' & Argv &
""" is not a gnatmake switch. Consider moving "
& "it to Global_Compilation_Switches.",
Element.Location);
Make_Failed ("*** illegal switch """ & Argv & """");
end if;
end;
end if;
Switch_List := Element.Next;
end loop;
end if;
end if;
end Add_Switches;
----------
-- Bind --
----------
procedure Bind (ALI_File : File_Name_Type; Args : Argument_List) is
Bind_Args : Argument_List (1 .. Args'Last + 2);
Bind_Last : Integer;
Success : Boolean;
begin
pragma Assert (Args'First = 1);
-- Optimize the simple case where the gnatbind command line looks like
-- gnatbind -aO. -I- file.ali
-- into
-- gnatbind file.adb
if Args'Length = 2
and then Args (Args'First).all = "-aO" & Normalized_CWD
and then Args (Args'Last).all = "-I-"
and then ALI_File = Strip_Directory (ALI_File)
then
Bind_Last := Args'First - 1;
else
Bind_Last := Args'Last;
Bind_Args (Args'Range) := Args;
end if;
-- It is completely pointless to re-check source file time stamps. This
-- has been done already by gnatmake
Bind_Last := Bind_Last + 1;
Bind_Args (Bind_Last) := Do_Not_Check_Flag;
Get_Name_String (ALI_File);
Bind_Last := Bind_Last + 1;
Bind_Args (Bind_Last) := new String'(Name_Buffer (1 .. Name_Len));
GNAT.OS_Lib.Normalize_Arguments (Bind_Args (Args'First .. Bind_Last));
Display (Gnatbind.all, Bind_Args (Args'First .. Bind_Last));
if Gnatbind_Path = null then
Make_Failed ("error, unable to locate " & Gnatbind.all);
end if;
GNAT.OS_Lib.Spawn
(Gnatbind_Path.all, Bind_Args (Args'First .. Bind_Last), Success);
if not Success then
Make_Failed ("*** bind failed.");
end if;
end Bind;
--------------------------------
-- Change_To_Object_Directory --
--------------------------------
procedure Change_To_Object_Directory (Project : Project_Id) is
Object_Directory : Path_Name_Type;
begin
pragma Assert (Project /= No_Project);
-- Nothing to do if the current working directory is already the correct
-- object directory.
if Project_Of_Current_Object_Directory /= Project then
Project_Of_Current_Object_Directory := Project;
Object_Directory := Project.Object_Directory.Display_Name;
-- Set the working directory to the object directory of the actual
-- project.
if Verbose_Mode then
Write_Str ("Changing to object directory of """);
Write_Name (Project.Display_Name);
Write_Str (""": """);
Write_Name (Object_Directory);
Write_Line ("""");
end if;
Change_Dir (Get_Name_String (Object_Directory));
end if;
exception
-- Fail if unable to change to the object directory
when Directory_Error =>
Make_Failed ("unable to change to object directory """ &
Path_Or_File_Name
(Project.Object_Directory.Display_Name) &
""" of project " &
Get_Name_String (Project.Display_Name));
end Change_To_Object_Directory;
-----------
-- Check --
-----------
procedure Check
(Source_File : File_Name_Type;
Is_Main_Source : Boolean;
The_Args : Argument_List;
Lib_File : File_Name_Type;
Full_Lib_File : File_Name_Type;
Lib_File_Attr : access File_Attributes;
Read_Only : Boolean;
ALI : out ALI_Id;
O_File : out File_Name_Type;
O_Stamp : out Time_Stamp_Type)
is
function First_New_Spec (A : ALI_Id) return File_Name_Type;
-- Looks in the with table entries of A and returns the spec file name
-- of the first withed unit (subprogram) for which no spec existed when
-- A was generated but for which there exists one now, implying that A
-- is now obsolete. If no such unit is found No_File is returned.
-- Otherwise the spec file name of the unit is returned.
--
-- **WARNING** in the event of Uname format modifications, one *MUST*
-- make sure this function is also updated.
--
-- Note: This function should really be in ali.adb and use Uname
-- services, but this causes the whole compiler to be dragged along
-- for gnatbind and gnatmake.
--------------------
-- First_New_Spec --
--------------------
function First_New_Spec (A : ALI_Id) return File_Name_Type is
Spec_File_Name : File_Name_Type := No_File;
function New_Spec (Uname : Unit_Name_Type) return Boolean;
-- Uname is the name of the spec or body of some ada unit. This
-- function returns True if the Uname is the name of a body which has
-- a spec not mentioned in ALI file A. If True is returned
-- Spec_File_Name above is set to the name of this spec file.
--------------
-- New_Spec --
--------------
function New_Spec (Uname : Unit_Name_Type) return Boolean is
Spec_Name : Unit_Name_Type;
File_Name : File_Name_Type;
begin
-- Test whether Uname is the name of a body unit (i.e. ends
-- with %b).
Get_Name_String (Uname);
pragma
Assert (Name_Len > 2 and then Name_Buffer (Name_Len - 1) = '%');
if Name_Buffer (Name_Len) /= 'b' then
return False;
end if;
-- Convert unit name into spec name
-- ??? this code seems dubious in presence of pragma
-- Source_File_Name since there is no more direct relationship
-- between unit name and file name.
-- ??? Further, what about alternative subunit naming
Name_Buffer (Name_Len) := 's';
Spec_Name := Name_Find;
File_Name := Get_File_Name (Spec_Name, Subunit => False);
-- Look if File_Name is mentioned in A's sdep list.
-- If not look if the file exists. If it does return True.
for D in
ALIs.Table (A).First_Sdep .. ALIs.Table (A).Last_Sdep
loop
if Sdep.Table (D).Sfile = File_Name then
return False;
end if;
end loop;
if Full_Source_Name (File_Name) /= No_File then
Spec_File_Name := File_Name;
return True;
end if;
return False;
end New_Spec;
-- Start of processing for First_New_Spec
begin
U_Chk : for U in
ALIs.Table (A).First_Unit .. ALIs.Table (A).Last_Unit
loop
exit U_Chk when Units.Table (U).Utype = Is_Body_Only
and then New_Spec (Units.Table (U).Uname);
for W in Units.Table (U).First_With
..
Units.Table (U).Last_With
loop
exit U_Chk when
Withs.Table (W).Afile /= No_File
and then New_Spec (Withs.Table (W).Uname);
end loop;
end loop U_Chk;
return Spec_File_Name;
end First_New_Spec;
---------------------------------
-- Data declarations for Check --
---------------------------------
Full_Obj_File : File_Name_Type;
-- Full name of the object file corresponding to Lib_File
Lib_Stamp : Time_Stamp_Type;
-- Time stamp of the current ada library file
Obj_Stamp : Time_Stamp_Type;
-- Time stamp of the current object file
Modified_Source : File_Name_Type;
-- The first source in Lib_File whose current time stamp differs from
-- that stored in Lib_File.
New_Spec : File_Name_Type;
-- If Lib_File contains in its W (with) section a body (for a
-- subprogram) for which there exists a spec, and the spec did not
-- appear in the Sdep section of Lib_File, New_Spec contains the file
-- name of this new spec.
Source_Name : File_Name_Type;
Text : Text_Buffer_Ptr;
Prev_Switch : String_Access;
-- Previous switch processed
Arg : Arg_Id := Arg_Id'First;
-- Current index in Args.Table for a given unit (init to stop warning)
Switch_Found : Boolean;
-- True if a given switch has been found
ALI_Project : Project_Id;
-- If the ALI file is in the object directory of a project, this is
-- the project id.
-- Start of processing for Check
begin
pragma Assert (Lib_File /= No_File);
-- If ALI file is read-only, temporarily set Check_Object_Consistency to
-- False. We don't care if the object file is not there (presumably a
-- library will be used for linking.)
if Read_Only then
declare
Saved_Check_Object_Consistency : constant Boolean :=
Check_Object_Consistency;
begin
Check_Object_Consistency := False;
Text := Read_Library_Info_From_Full (Full_Lib_File, Lib_File_Attr);
Check_Object_Consistency := Saved_Check_Object_Consistency;
end;
else
Text := Read_Library_Info_From_Full (Full_Lib_File, Lib_File_Attr);
end if;
Full_Obj_File := Full_Object_File_Name;
Lib_Stamp := Current_Library_File_Stamp;
Obj_Stamp := Current_Object_File_Stamp;
if Full_Lib_File = No_File then
Verbose_Msg
(Lib_File,
"being checked ...",
Prefix => " ",
Minimum_Verbosity => Opt.Medium);
else
Verbose_Msg
(Full_Lib_File,
"being checked ...",
Prefix => " ",
Minimum_Verbosity => Opt.Medium);
end if;
ALI := No_ALI_Id;
O_File := Full_Obj_File;
O_Stamp := Obj_Stamp;
if Text = null then
if Full_Lib_File = No_File then
Verbose_Msg (Lib_File, "missing.");
elsif Obj_Stamp (Obj_Stamp'First) = ' ' then
Verbose_Msg (Full_Obj_File, "missing.");
else
Verbose_Msg
(Full_Lib_File, "(" & String (Lib_Stamp) & ") newer than",
Full_Obj_File, "(" & String (Obj_Stamp) & ")");
end if;
else
ALI := Scan_ALI (Lib_File, Text, Ignore_ED => False, Err => True);
Free (Text);
if ALI = No_ALI_Id then
Verbose_Msg (Full_Lib_File, "incorrectly formatted ALI file");
return;
elsif ALIs.Table (ALI).Ver (1 .. ALIs.Table (ALI).Ver_Len) /=
Verbose_Library_Version
then
Verbose_Msg (Full_Lib_File, "compiled with old GNAT version");
ALI := No_ALI_Id;
return;
end if;
-- Don't take ALI file into account if it was generated with errors
if ALIs.Table (ALI).Compile_Errors then
Verbose_Msg (Full_Lib_File, "had errors, must be recompiled");
ALI := No_ALI_Id;
return;
end if;
-- Don't take ALI file into account if no object was generated
if Operating_Mode /= Check_Semantics
and then ALIs.Table (ALI).No_Object
then
Verbose_Msg (Full_Lib_File, "has no corresponding object");
ALI := No_ALI_Id;
return;
end if;
-- When compiling with -gnatc, don't take ALI file into account if
-- it has not been generated for the current source, for example if
-- it has been generated for the spec, but we are compiling the body.
if Operating_Mode = Check_Semantics then
declare
File_Name : String := Get_Name_String (Source_File);
OK : Boolean := False;
begin
-- In the ALI file, the source file names are in canonical case
Canonical_Case_File_Name (File_Name);
for U in ALIs.Table (ALI).First_Unit ..
ALIs.Table (ALI).Last_Unit
loop
OK := Get_Name_String (Units.Table (U).Sfile) = File_Name;
exit when OK;
end loop;
if not OK then
Verbose_Msg
(Full_Lib_File, "not generated for the same source");
ALI := No_ALI_Id;
return;
end if;
end;
end if;
-- Check for matching compiler switches if needed
if Check_Switches then
-- First, collect all the switches
Collect_Arguments (Source_File, Is_Main_Source, The_Args);
Prev_Switch := Dummy_Switch;
Get_Name_String (ALIs.Table (ALI).Sfile);
Switches_To_Check.Set_Last (0);
for J in 1 .. Last_Argument loop
-- Skip non switches -c, -I and -o switches
if Arguments (J) (1) = '-'
and then Arguments (J) (2) /= 'c'
and then Arguments (J) (2) /= 'o'
and then Arguments (J) (2) /= 'I'
then
Normalize_Compiler_Switches
(Arguments (J).all,
Normalized_Switches,
Last_Norm_Switch);
for K in 1 .. Last_Norm_Switch loop
Switches_To_Check.Increment_Last;
Switches_To_Check.Table (Switches_To_Check.Last) :=
Normalized_Switches (K);
end loop;
end if;
end loop;
for J in 1 .. Switches_To_Check.Last loop
-- Comparing switches is delicate because gcc reorders a number
-- of switches, according to lang-specs.h, but gnatmake doesn't
-- have sufficient knowledge to perform the same reordering.
-- Instead, we ignore orders between different "first letter"
-- switches, but keep orders between same switches, e.g -O -O2
-- is different than -O2 -O, but -g -O is equivalent to -O -g.
if Switches_To_Check.Table (J) (2) /= Prev_Switch (2) or else
(Prev_Switch'Length >= 6 and then
Prev_Switch (2 .. 5) = "gnat" and then
Switches_To_Check.Table (J)'Length >= 6 and then
Switches_To_Check.Table (J) (2 .. 5) = "gnat" and then
Prev_Switch (6) /= Switches_To_Check.Table (J) (6))
then
Prev_Switch := Switches_To_Check.Table (J);
Arg :=
Units.Table (ALIs.Table (ALI).First_Unit).First_Arg;
end if;
Switch_Found := False;
for K in Arg ..
Units.Table (ALIs.Table (ALI).First_Unit).Last_Arg
loop
if
Switches_To_Check.Table (J).all = Args.Table (K).all
then
Arg := K + 1;
Switch_Found := True;
exit;
end if;
end loop;
if not Switch_Found then
if Verbose_Mode then
Verbose_Msg (ALIs.Table (ALI).Sfile,
"switch mismatch """ &
Switches_To_Check.Table (J).all & '"');
end if;
ALI := No_ALI_Id;
return;
end if;
end loop;
if Switches_To_Check.Last /=
Integer (Units.Table (ALIs.Table (ALI).First_Unit).Last_Arg -
Units.Table (ALIs.Table (ALI).First_Unit).First_Arg + 1)
then
if Verbose_Mode then
Verbose_Msg (ALIs.Table (ALI).Sfile,
"different number of switches");
for K in Units.Table (ALIs.Table (ALI).First_Unit).First_Arg
.. Units.Table (ALIs.Table (ALI).First_Unit).Last_Arg
loop
Write_Str (Args.Table (K).all);
Write_Char (' ');
end loop;
Write_Eol;
for J in 1 .. Switches_To_Check.Last loop
Write_Str (Switches_To_Check.Table (J).all);
Write_Char (' ');
end loop;
Write_Eol;
end if;
ALI := No_ALI_Id;
return;
end if;
end if;
-- Get the source files and their message digests. Note that some
-- sources may be missing if ALI is out-of-date.
Set_Source_Table (ALI);
Modified_Source := Time_Stamp_Mismatch (ALI, Read_Only);
-- To avoid using too much memory when switch -m is used, free the
-- memory allocated for the source file when computing the checksum.
if Minimal_Recompilation then
Sinput.P.Clear_Source_File_Table;
end if;
if Modified_Source /= No_File then
ALI := No_ALI_Id;
if Verbose_Mode then
Source_Name := Full_Source_Name (Modified_Source);
if Source_Name /= No_File then
Verbose_Msg (Source_Name, "time stamp mismatch");
else
Verbose_Msg (Modified_Source, "missing");
end if;
end if;
else
New_Spec := First_New_Spec (ALI);
if New_Spec /= No_File then
ALI := No_ALI_Id;
if Verbose_Mode then
Source_Name := Full_Source_Name (New_Spec);
if Source_Name /= No_File then
Verbose_Msg (Source_Name, "new spec");
else
Verbose_Msg (New_Spec, "old spec missing");
end if;
end if;
elsif not Read_Only and then Main_Project /= No_Project then
declare
Uname : constant Name_Id :=
Check_Source_Info_In_ALI (ALI, Project_Tree);
Udata : Prj.Unit_Index;
begin
if Uname = No_Name then
ALI := No_ALI_Id;
return;
end if;
-- Check that ALI file is in the correct object directory.
-- If it is in the object directory of a project that is
-- extended and it depends on a source that is in one of
-- its extending projects, then the ALI file is not in the
-- correct object directory.
-- First, find the project of this ALI file. As there may be
-- several projects with the same object directory, we first
-- need to find the project of the source.
ALI_Project := No_Project;
Udata := Units_Htable.Get (Project_Tree.Units_HT, Uname);
if Udata /= No_Unit_Index then
if Udata.File_Names (Impl) /= null
and then Udata.File_Names (Impl).File = Source_File
then
ALI_Project := Udata.File_Names (Impl).Project;
elsif Udata.File_Names (Spec) /= null
and then Udata.File_Names (Spec).File = Source_File
then
ALI_Project := Udata.File_Names (Spec).Project;
end if;
end if;
end;
if ALI_Project = No_Project then
return;
end if;
declare
Obj_Dir : Path_Name_Type;
Res_Obj_Dir : constant String :=
Normalize_Pathname
(Dir_Name
(Get_Name_String (Full_Lib_File)),
Resolve_Links =>
Opt.Follow_Links_For_Dirs,
Case_Sensitive => False);
begin
Name_Len := 0;
Add_Str_To_Name_Buffer (Res_Obj_Dir);
if not Is_Directory_Separator (Name_Buffer (Name_Len)) then
Add_Char_To_Name_Buffer (Directory_Separator);
end if;
Obj_Dir := Name_Find;
while ALI_Project /= No_Project
and then Obj_Dir /= ALI_Project.Object_Directory.Name
loop
ALI_Project := ALI_Project.Extended_By;
end loop;
end;
if ALI_Project = No_Project then
ALI := No_ALI_Id;
Verbose_Msg (Lib_File, " wrong object directory");
return;
end if;
-- If the ALI project is not extended, then it must be in
-- the correct object directory.
if ALI_Project.Extended_By = No_Project then
return;
end if;
-- Count the extending projects
declare
Num_Ext : Natural;
Proj : Project_Id;
begin
Num_Ext := 0;
Proj := ALI_Project;
loop
Proj := Proj.Extended_By;
exit when Proj = No_Project;
Num_Ext := Num_Ext + 1;
end loop;
-- Make a list of the extending projects
declare
Projects : array (1 .. Num_Ext) of Project_Id;
Dep : Sdep_Record;
OK : Boolean := True;
UID : Unit_Index;
begin
Proj := ALI_Project;
for J in Projects'Range loop
Proj := Proj.Extended_By;
Projects (J) := Proj;
end loop;
-- Now check if any of the dependant sources are in any
-- of these extending projects.
D_Chk :
for D in ALIs.Table (ALI).First_Sdep ..
ALIs.Table (ALI).Last_Sdep
loop
Dep := Sdep.Table (D);
UID := Units_Htable.Get_First (Project_Tree.Units_HT);
Proj := No_Project;
Unit_Loop :
while UID /= null loop
if UID.File_Names (Impl) /= null
and then UID.File_Names (Impl).File = Dep.Sfile
then
Proj := UID.File_Names (Impl).Project;
elsif UID.File_Names (Spec) /= null
and then UID.File_Names (Spec).File = Dep.Sfile
then
Proj := UID.File_Names (Spec).Project;
end if;
-- If a source is in a project, check if it is one
-- in the list.
if Proj /= No_Project then
for J in Projects'Range loop
if Proj = Projects (J) then
OK := False;
exit D_Chk;
end if;
end loop;
exit Unit_Loop;
end if;
UID :=
Units_Htable.Get_Next (Project_Tree.Units_HT);
end loop Unit_Loop;
end loop D_Chk;
-- If one of the dependent sources is in one project of
-- the list, then we must recompile.
if not OK then
ALI := No_ALI_Id;
Verbose_Msg (Lib_File, " wrong object directory");
end if;
end;
end;
end if;
end if;
end if;
end Check;
------------------------
-- Check_For_S_Switch --
------------------------
procedure Check_For_S_Switch is
begin
-- By default, we generate an object file
Output_Is_Object := True;
for Arg in 1 .. Last_Argument loop
if Arguments (Arg).all = "-S" then
Output_Is_Object := False;
elsif Arguments (Arg).all = "-c" then
Output_Is_Object := True;
end if;
end loop;
end Check_For_S_Switch;
--------------------------
-- Check_Linker_Options --
--------------------------
procedure Check_Linker_Options
(E_Stamp : Time_Stamp_Type;
O_File : out File_Name_Type;
O_Stamp : out Time_Stamp_Type)
is
procedure Check_File (File : File_Name_Type);
-- Update O_File and O_Stamp if the given file is younger than E_Stamp
-- and O_Stamp, or if O_File is No_File and File does not exist.
function Get_Library_File (Name : String) return File_Name_Type;
-- Return the full file name including path of a library based
-- on the name specified with the -l linker option, using the
-- Ada object path. Return No_File if no such file can be found.
type Char_Array is array (Natural) of Character;
type Char_Array_Access is access constant Char_Array;
Template : Char_Array_Access;
pragma Import (C, Template, "__gnat_library_template");
----------------
-- Check_File --
----------------
procedure Check_File (File : File_Name_Type) is
Stamp : Time_Stamp_Type;
Name : File_Name_Type := File;
begin
Get_Name_String (Name);
-- Remove any trailing NUL characters
while Name_Len >= Name_Buffer'First
and then Name_Buffer (Name_Len) = NUL
loop
Name_Len := Name_Len - 1;
end loop;
if Name_Len = 0 then
return;
elsif Name_Buffer (1) = '-' then
-- Do not check if File is a switch other than "-l"
if Name_Buffer (2) /= 'l' then
return;
end if;
-- The argument is a library switch, get actual name. It
-- is necessary to make a copy of the relevant part of
-- Name_Buffer as Get_Library_Name uses Name_Buffer as well.
declare
Base_Name : constant String := Name_Buffer (3 .. Name_Len);
begin
Name := Get_Library_File (Base_Name);
end;
if Name = No_File then
return;
end if;
end if;
Stamp := File_Stamp (Name);
-- Find the youngest object file that is younger than the
-- executable. If no such file exist, record the first object
-- file that is not found.
if (O_Stamp < Stamp and then E_Stamp < Stamp)
or else (O_File = No_File and then Stamp (Stamp'First) = ' ')
then
O_Stamp := Stamp;
O_File := Name;
-- Strip the trailing NUL if present
Get_Name_String (O_File);
if Name_Buffer (Name_Len) = NUL then
Name_Len := Name_Len - 1;
O_File := Name_Find;
end if;
end if;
end Check_File;
----------------------
-- Get_Library_Name --
----------------------
-- See comments in a-adaint.c about template syntax
function Get_Library_File (Name : String) return File_Name_Type is
File : File_Name_Type := No_File;
begin
Name_Len := 0;
for Ptr in Template'Range loop
case Template (Ptr) is
when '*' =>
Add_Str_To_Name_Buffer (Name);
when ';' =>
File := Full_Lib_File_Name (Name_Find);
exit when File /= No_File;
Name_Len := 0;
when NUL =>
exit;
when others =>
Add_Char_To_Name_Buffer (Template (Ptr));
end case;
end loop;
-- The for loop exited because the end of the template
-- was reached. File contains the last possible file name
-- for the library.
if File = No_File and then Name_Len > 0 then
File := Full_Lib_File_Name (Name_Find);
end if;
return File;
end Get_Library_File;
-- Start of processing for Check_Linker_Options
begin
O_File := No_File;
O_Stamp := (others => ' ');
-- Process linker options from the ALI files
for Opt in 1 .. Linker_Options.Last loop
Check_File (File_Name_Type (Linker_Options.Table (Opt).Name));
end loop;
-- Process options given on the command line
for Opt in Linker_Switches.First .. Linker_Switches.Last loop
-- Check if the previous Opt has one of the two switches
-- that take an extra parameter. (See GCC manual.)
if Opt = Linker_Switches.First
or else (Linker_Switches.Table (Opt - 1).all /= "-u"
and then
Linker_Switches.Table (Opt - 1).all /= "-Xlinker"
and then
Linker_Switches.Table (Opt - 1).all /= "-L")
then
Name_Len := 0;
Add_Str_To_Name_Buffer (Linker_Switches.Table (Opt).all);
Check_File (Name_Find);
end if;
end loop;
end Check_Linker_Options;
-----------------
-- Check_Steps --
-----------------
procedure Check_Steps is
begin
-- If either -c, -b or -l has been specified, we will not necessarily
-- execute all steps.
if Make_Steps then
Do_Compile_Step := Do_Compile_Step and Compile_Only;
Do_Bind_Step := Do_Bind_Step and Bind_Only;
Do_Link_Step := Do_Link_Step and Link_Only;
-- If -c has been specified, but not -b, ignore any potential -l
if Do_Compile_Step and then not Do_Bind_Step then
Do_Link_Step := False;
end if;
end if;
end Check_Steps;
-----------------------
-- Collect_Arguments --
-----------------------
procedure Collect_Arguments
(Source_File : File_Name_Type;
Is_Main_Source : Boolean;
Args : Argument_List)
is
pragma Unreferenced (Is_Main_Source);
begin
Arguments_Project := No_Project;
Last_Argument := 0;
Add_Arguments (Args);
if Main_Project /= No_Project then
declare
Source_File_Name : constant String :=
Get_Name_String (Source_File);
Compiler_Package : Prj.Package_Id;
Switches : Prj.Variable_Value;
begin
Prj.Env.
Get_Reference
(Source_File_Name => Source_File_Name,
Project => Arguments_Project,
Path => Arguments_Path_Name,
In_Tree => Project_Tree);
-- If the source is not a source of a project file, add the
-- recorded arguments. Check will be done later if the source
-- need to be compiled that the switch -x has been used.
if Arguments_Project = No_Project then
Add_Arguments (The_Saved_Gcc_Switches.all);
elsif not Arguments_Project.Externally_Built or else Must_Compile
then
-- We get the project directory for the relative path
-- switches and arguments.
Arguments_Project :=
Ultimate_Extending_Project_Of (Arguments_Project);
-- If building a dynamic or relocatable library, compile with
-- PIC option, if it exists.
if Arguments_Project.Library
and then Arguments_Project.Library_Kind /= Static
then
declare
PIC : constant String := MLib.Tgt.PIC_Option;
begin
if PIC /= "" then
Add_Arguments ((1 => new String'(PIC)));
end if;
end;
end if;
-- We now look for package Compiler and get the switches from
-- this package.
Compiler_Package :=
Prj.Util.Value_Of
(Name => Name_Compiler,
In_Packages => Arguments_Project.Decl.Packages,
Shared => Project_Tree.Shared);
if Compiler_Package /= No_Package then
-- If package Gnatmake.Compiler exists, we get the specific
-- switches for the current source, or the global switches,
-- if any.
Switches :=
Switches_Of
(Source_File => Source_File,
Project => Arguments_Project,
In_Package => Compiler_Package,
Allow_ALI => False);
end if;
case Switches.Kind is
-- We have a list of switches. We add these switches,
-- plus the saved gcc switches.
when List =>
declare
Current : String_List_Id := Switches.Values;
Element : String_Element;
Number : Natural := 0;
begin
while Current /= Nil_String loop
Element := Project_Tree.Shared.String_Elements.
Table (Current);
Number := Number + 1;
Current := Element.Next;
end loop;
declare
New_Args : Argument_List (1 .. Number);
Last_New : Natural := 0;
Dir_Path : constant String := Get_Name_String
(Arguments_Project.Directory.Display_Name);
begin
Current := Switches.Values;
for Index in New_Args'Range loop
Element := Project_Tree.Shared.String_Elements.
Table (Current);
Get_Name_String (Element.Value);
if Name_Len > 0 then
Last_New := Last_New + 1;
New_Args (Last_New) :=
new String'(Name_Buffer (1 .. Name_Len));
Ensure_Absolute_Path
(New_Args (Last_New),
Do_Fail => Make_Failed'Access,
Parent => Dir_Path,
Including_Non_Switch => False);
end if;
Current := Element.Next;
end loop;
Add_Arguments
(Configuration_Pragmas_Switch (Arguments_Project)
& New_Args (1 .. Last_New)
& The_Saved_Gcc_Switches.all);
end;
end;
-- We have a single switch. We add this switch,
-- plus the saved gcc switches.
when Single =>
Get_Name_String (Switches.Value);
declare
New_Args : Argument_List :=
(1 => new String'
(Name_Buffer (1 .. Name_Len)));
Dir_Path : constant String :=
Get_Name_String
(Arguments_Project.
Directory.Display_Name);
begin
Ensure_Absolute_Path
(New_Args (1),
Do_Fail => Make_Failed'Access,
Parent => Dir_Path,
Including_Non_Switch => False);
Add_Arguments
(Configuration_Pragmas_Switch (Arguments_Project) &
New_Args & The_Saved_Gcc_Switches.all);
end;
-- We have no switches from Gnatmake.Compiler.
-- We add the saved gcc switches.
when Undefined =>
Add_Arguments
(Configuration_Pragmas_Switch (Arguments_Project) &
The_Saved_Gcc_Switches.all);
end case;
end if;
end;
end if;
-- Set Output_Is_Object, depending if there is a -S switch.
-- If the bind step is not performed, and there is a -S switch,
-- then we will not check for a valid object file.
Check_For_S_Switch;
end Collect_Arguments;
---------------------
-- Compile_Sources --
---------------------
procedure Compile_Sources
(Main_Source : File_Name_Type;
Args : Argument_List;
First_Compiled_File : out File_Name_Type;
Most_Recent_Obj_File : out File_Name_Type;
Most_Recent_Obj_Stamp : out Time_Stamp_Type;
Main_Unit : out Boolean;
Compilation_Failures : out Natural;
Main_Index : Int := 0;
Check_Readonly_Files : Boolean := False;
Do_Not_Execute : Boolean := False;
Force_Compilations : Boolean := False;
Keep_Going : Boolean := False;
In_Place_Mode : Boolean := False;
Initialize_ALI_Data : Boolean := True;
Max_Process : Positive := 1)
is
Mfile : Natural := No_Mapping_File;
Mapping_File_Arg : String_Access;
-- Info on the mapping file
Need_To_Check_Standard_Library : Boolean :=
(Check_Readonly_Files or Must_Compile)
and not Unique_Compile;
procedure Add_Process
(Pid : Process_Id;
Sfile : File_Name_Type;
Afile : File_Name_Type;
Uname : Unit_Name_Type;
Full_Lib_File : File_Name_Type;
Lib_File_Attr : File_Attributes;
Mfile : Natural := No_Mapping_File);
-- Adds process Pid to the current list of outstanding compilation
-- processes and record the full name of the source file Sfile that
-- we are compiling, the name of its library file Afile and the
-- name of its unit Uname. If Mfile is not equal to No_Mapping_File,
-- it is the index of the mapping file used during compilation in the
-- array The_Mapping_File_Names.
procedure Await_Compile
(Data : out Compilation_Data;
OK : out Boolean);
-- Awaits that an outstanding compilation process terminates. When it
-- does set Data to the information registered for the corresponding
-- call to Add_Process. Note that this time stamp can be used to check
-- whether the compilation did generate an object file. OK is set to
-- True if the compilation succeeded. Data could be No_Compilation_Data
-- if there was no compilation to wait for.
function Bad_Compilation_Count return Natural;
-- Returns the number of compilation failures
procedure Check_Standard_Library;
-- Check if s-stalib.adb needs to be compiled
procedure Collect_Arguments_And_Compile
(Full_Source_File : File_Name_Type;
Lib_File : File_Name_Type;
Source_Index : Int;
Pid : out Process_Id;
Process_Created : out Boolean);
-- Collect arguments from project file (if any) and compile. If no
-- compilation was attempted, Processed_Created is set to False, and the
-- value of Pid is unknown.
function Compile
(Project : Project_Id;
S : File_Name_Type;
L : File_Name_Type;
Source_Index : Int;
Args : Argument_List) return Process_Id;
-- Compiles S using Args. If S is a GNAT predefined source "-gnatpg" is
-- added to Args. Non blocking call. L corresponds to the expected
-- library file name. Process_Id of the process spawned to execute the
-- compilation.
type ALI_Project is record
ALI : ALI_Id;
Project : Project_Id;
end record;
package Good_ALI is new Table.Table (
Table_Component_Type => ALI_Project,
Table_Index_Type => Natural,
Table_Low_Bound => 1,
Table_Initial => 50,
Table_Increment => 100,
Table_Name => "Make.Good_ALI");
-- Contains the set of valid ALI files that have not yet been scanned
function Good_ALI_Present return Boolean;
-- Returns True if any ALI file was recorded in the previous set
procedure Get_Mapping_File (Project : Project_Id);
-- Get a mapping file name. If there is one to be reused, reuse it.
-- Otherwise, create a new mapping file.
function Get_Next_Good_ALI return ALI_Project;
-- Returns the next good ALI_Id record
procedure Record_Failure
(File : File_Name_Type;
Unit : Unit_Name_Type;
Found : Boolean := True);
-- Records in the previous table that the compilation for File failed.
-- If Found is False then the compilation of File failed because we
-- could not find it. Records also Unit when possible.
procedure Record_Good_ALI (A : ALI_Id; Project : Project_Id);
-- Records in the previous set the Id of an ALI file
function Must_Exit_Because_Of_Error return Boolean;
-- Return True if there were errors and the user decided to exit in such
-- a case. This waits for any outstanding compilation.
function Start_Compile_If_Possible (Args : Argument_List) return Boolean;
-- Check if there is more work that we can do (i.e. the Queue is non
-- empty). If there is, do it only if we have not yet used up all the
-- available processes.
-- Returns True if we should exit the main loop
procedure Wait_For_Available_Slot;
-- Check if we should wait for a compilation to finish. This is the case
-- if all the available processes are busy compiling sources or there is
-- nothing else to do (that is the Q is empty and there are no good ALIs
-- to process).
procedure Fill_Queue_From_ALI_Files;
-- Check if we recorded good ALI files. If yes process them now in the
-- order in which they have been recorded. There are two occasions in
-- which we record good ali files. The first is in phase 1 when, after
-- scanning an existing ALI file we realize it is up-to-date, the second
-- instance is after a successful compilation.
-----------------
-- Add_Process --
-----------------
procedure Add_Process
(Pid : Process_Id;
Sfile : File_Name_Type;
Afile : File_Name_Type;
Uname : Unit_Name_Type;
Full_Lib_File : File_Name_Type;
Lib_File_Attr : File_Attributes;
Mfile : Natural := No_Mapping_File)
is
OC1 : constant Positive := Outstanding_Compiles + 1;
begin
pragma Assert (OC1 <= Max_Process);
pragma Assert (Pid /= Invalid_Pid);
Running_Compile (OC1) :=
(Pid => Pid,
Full_Source_File => Sfile,
Lib_File => Afile,
Full_Lib_File => Full_Lib_File,
Lib_File_Attr => Lib_File_Attr,
Source_Unit => Uname,
Mapping_File => Mfile,
Project => Arguments_Project);
Outstanding_Compiles := OC1;
if Arguments_Project /= No_Project then
Queue.Set_Obj_Dir_Busy (Arguments_Project.Object_Directory.Name);
end if;
end Add_Process;
--------------------
-- Await_Compile --
-------------------
procedure Await_Compile
(Data : out Compilation_Data;
OK : out Boolean)
is
Pid : Process_Id;
Project : Project_Id;
Comp_Data : Project_Compilation_Access;
begin
pragma Assert (Outstanding_Compiles > 0);
Data := No_Compilation_Data;
OK := False;
Wait_Process (Pid, OK);
if Pid = Invalid_Pid then
return;
end if;
-- Look into the running compilation processes for this PID
for J in Running_Compile'First .. Outstanding_Compiles loop
if Pid = Running_Compile (J).Pid then
Data := Running_Compile (J);
Project := Running_Compile (J).Project;
if Project /= No_Project then
Queue.Set_Obj_Dir_Free (Project.Object_Directory.Name);
end if;
-- If a mapping file was used by this compilation, get its file
-- name for reuse by a subsequent compilation.
if Running_Compile (J).Mapping_File /= No_Mapping_File then
Comp_Data :=
Project_Compilation_Htable.Get
(Project_Compilation, Project);
Comp_Data.Last_Free_Indexes :=
Comp_Data.Last_Free_Indexes + 1;
Comp_Data.Free_Mapping_File_Indexes
(Comp_Data.Last_Free_Indexes) :=
Running_Compile (J).Mapping_File;
end if;
-- To actually remove this Pid and related info from
-- Running_Compile replace its entry with the last valid
-- entry in Running_Compile.
if J = Outstanding_Compiles then
null;
else
Running_Compile (J) :=
Running_Compile (Outstanding_Compiles);
end if;
Outstanding_Compiles := Outstanding_Compiles - 1;
exit;
end if;
end loop;
-- If the PID was not found, return with OK set to False
if Data = No_Compilation_Data then
OK := False;
end if;
end Await_Compile;
---------------------------
-- Bad_Compilation_Count --
---------------------------
function Bad_Compilation_Count return Natural is
begin
return Bad_Compilation.Last - Bad_Compilation.First + 1;
end Bad_Compilation_Count;
----------------------------
-- Check_Standard_Library --
----------------------------
procedure Check_Standard_Library is
begin
Need_To_Check_Standard_Library := False;
if not Targparm.Suppress_Standard_Library_On_Target then
declare
Sfile : File_Name_Type;
Add_It : Boolean := True;
begin
Name_Len := 0;
Add_Str_To_Name_Buffer (Standard_Library_Package_Body_Name);
Sfile := Name_Enter;
-- If we have a special runtime, we add the standard
-- library only if we can find it.
if RTS_Switch then
Add_It := Full_Source_Name (Sfile) /= No_File;
end if;
if Add_It then
if not Queue.Insert
((Format => Format_Gnatmake,
File => Sfile,
Unit => No_Unit_Name,
Project => No_Project,
Index => 0,
Sid => No_Source))
then
if Is_In_Obsoleted (Sfile) then
Executable_Obsolete := True;
end if;
end if;
end if;
end;
end if;
end Check_Standard_Library;
-----------------------------------
-- Collect_Arguments_And_Compile --
-----------------------------------
procedure Collect_Arguments_And_Compile
(Full_Source_File : File_Name_Type;
Lib_File : File_Name_Type;
Source_Index : Int;
Pid : out Process_Id;
Process_Created : out Boolean) is
begin
Process_Created := False;
-- If we use mapping file (-P or -C switches), then get one
if Create_Mapping_File then
Get_Mapping_File (Arguments_Project);
end if;
-- If the source is part of a project file, we set the ADA_*_PATHs,
-- check for an eventual library project, and use the full path.
if Arguments_Project /= No_Project then
if not Arguments_Project.Externally_Built
or else Must_Compile
then
Prj.Env.Set_Ada_Paths
(Arguments_Project,
Project_Tree,
Including_Libraries => True,
Include_Path => Use_Include_Path_File);
if not Unique_Compile
and then MLib.Tgt.Support_For_Libraries /= Prj.None
then
declare
Prj : constant Project_Id :=
Ultimate_Extending_Project_Of (Arguments_Project);
begin
if Prj.Library
and then (not Prj.Externally_Built or else Must_Compile)
and then not Prj.Need_To_Build_Lib
then
-- Add to the Q all sources of the project that have
-- not been marked.
Insert_Project_Sources
(The_Project => Prj,
All_Projects => False,
Into_Q => True);
-- Now mark the project as processed
Prj.Need_To_Build_Lib := True;
end if;
end;
end if;
Pid :=
Compile
(Project => Arguments_Project,
S => File_Name_Type (Arguments_Path_Name),
L => Lib_File,
Source_Index => Source_Index,
Args => Arguments (1 .. Last_Argument));
Process_Created := True;
end if;
else
-- If this is a source outside of any project file, make sure it
-- will be compiled in object directory of the main project file.
Pid :=
Compile
(Project => Main_Project,
S => Full_Source_File,
L => Lib_File,
Source_Index => Source_Index,
Args => Arguments (1 .. Last_Argument));
Process_Created := True;
end if;
end Collect_Arguments_And_Compile;
-------------
-- Compile --
-------------
function Compile
(Project : Project_Id;
S : File_Name_Type;
L : File_Name_Type;
Source_Index : Int;
Args : Argument_List) return Process_Id
is
Comp_Args : Argument_List (Args'First .. Args'Last + 10);
Comp_Next : Integer := Args'First;
Comp_Last : Integer;
Arg_Index : Integer;
function Ada_File_Name (Name : File_Name_Type) return Boolean;
-- Returns True if Name is the name of an ada source file
-- (i.e. suffix is .ads or .adb)
-------------------
-- Ada_File_Name --
-------------------
function Ada_File_Name (Name : File_Name_Type) return Boolean is
begin
Get_Name_String (Name);
return
Name_Len > 4
and then Name_Buffer (Name_Len - 3 .. Name_Len - 1) = ".ad"
and then (Name_Buffer (Name_Len) = 'b'
or else
Name_Buffer (Name_Len) = 's');
end Ada_File_Name;
-- Start of processing for Compile
begin
Enter_Into_Obsoleted (S);
-- By default, Syntax_Only is False
Syntax_Only := False;
for J in Args'Range loop
if Args (J).all = "-gnats" then
-- If we compile with -gnats, the bind step and the link step
-- are inhibited. Also, we set Syntax_Only to True, so that
-- we don't fail when we don't find the ALI file, after
-- compilation.
Do_Bind_Step := False;
Do_Link_Step := False;
Syntax_Only := True;
elsif Args (J).all = "-gnatc" then
-- If we compile with -gnatc, the bind step and the link step
-- are inhibited. We set Syntax_Only to False for the case when
-- -gnats was previously specified.
Do_Bind_Step := False;
Do_Link_Step := False;
Syntax_Only := False;
end if;
end loop;
Comp_Args (Comp_Next) := new String'("-gnatea");
Comp_Next := Comp_Next + 1;
Comp_Args (Comp_Next) := Comp_Flag;
Comp_Next := Comp_Next + 1;
-- Optimize the simple case where the gcc command line looks like
-- gcc -c -I. ... -I- file.adb
-- into
-- gcc -c ... file.adb
if Args (Args'First).all = "-I" & Normalized_CWD
and then Args (Args'Last).all = "-I-"
and then S = Strip_Directory (S)
then
Comp_Last := Comp_Next + Args'Length - 3;
Arg_Index := Args'First + 1;
else
Comp_Last := Comp_Next + Args'Length - 1;
Arg_Index := Args'First;
end if;
-- Make a deep copy of the arguments, because Normalize_Arguments
-- may deallocate some arguments. Also strip target specific -mxxx
-- switches in CodePeer mode.
declare
Index : Natural;
Last : constant Natural := Comp_Last;
begin
Index := Comp_Next;
for J in Comp_Next .. Last loop
declare
Str : String renames Args (Arg_Index).all;
begin
if CodePeer_Mode
and then Str'Length > 2
and then Str (Str'First .. Str'First + 1) = "-m"
then
Comp_Last := Comp_Last - 1;
else
Comp_Args (Index) := new String'(Str);
Index := Index + 1;
end if;
end;
Arg_Index := Arg_Index + 1;
end loop;
end;
-- Set -gnatpg for predefined files (for this purpose the renamings
-- such as Text_IO do not count as predefined). Note that we strip
-- the directory name from the source file name because the call to
-- Fname.Is_Predefined_File_Name cannot deal with directory prefixes.
declare
Fname : constant File_Name_Type := Strip_Directory (S);
begin
if Is_Predefined_File_Name (Fname, False) then
if Check_Readonly_Files or else Must_Compile then
Comp_Args (Comp_Args'First + 2 .. Comp_Last + 1) :=
Comp_Args (Comp_Args'First + 1 .. Comp_Last);
Comp_Last := Comp_Last + 1;
Comp_Args (Comp_Args'First + 1) := GNAT_Flag;
else
Make_Failed
("not allowed to compile """ &
Get_Name_String (Fname) &
"""; use -a switch, or use the compiler directly with "
& "the ""-gnatg"" switch");
end if;
end if;
end;
-- Now check if the file name has one of the suffixes familiar to
-- the gcc driver. If this is not the case then add the ada flag
-- "-x ada".
-- Append systematically "-x adascil" in CodePeer mode instead, to
-- force the use of gnat1scil instead of gnat1.
if CodePeer_Mode then
Comp_Last := Comp_Last + 1;
Comp_Args (Comp_Last) := Ada_Flag_1;
Comp_Last := Comp_Last + 1;
Comp_Args (Comp_Last) := AdaSCIL_Flag;
elsif not Ada_File_Name (S) and then not Targparm.AAMP_On_Target then
Comp_Last := Comp_Last + 1;
Comp_Args (Comp_Last) := Ada_Flag_1;
Comp_Last := Comp_Last + 1;
Comp_Args (Comp_Last) := Ada_Flag_2;
end if;
if Source_Index /= 0 then
declare
Num : constant String := Source_Index'Img;
begin
Comp_Last := Comp_Last + 1;
Comp_Args (Comp_Last) :=
new String'("-gnateI" & Num (Num'First + 1 .. Num'Last));
end;
end if;
if Source_Index /= 0
or else L /= Strip_Directory (L)
or else Object_Directory_Path /= null
then
-- Build -o argument
Get_Name_String (L);
for J in reverse 1 .. Name_Len loop
if Name_Buffer (J) = '.' then
Name_Len := J + Object_Suffix'Length - 1;
Name_Buffer (J .. Name_Len) := Object_Suffix;
exit;
end if;
end loop;
Comp_Last := Comp_Last + 1;
Comp_Args (Comp_Last) := Output_Flag;
Comp_Last := Comp_Last + 1;
-- If an object directory was specified, prepend the object file
-- name with this object directory.
if Object_Directory_Path /= null then
Comp_Args (Comp_Last) :=
new String'(Object_Directory_Path.all &
Name_Buffer (1 .. Name_Len));
else
Comp_Args (Comp_Last) :=
new String'(Name_Buffer (1 .. Name_Len));
end if;
end if;
if Create_Mapping_File and then Mapping_File_Arg /= null then
Comp_Last := Comp_Last + 1;
Comp_Args (Comp_Last) := new String'(Mapping_File_Arg.all);
end if;
Get_Name_String (S);
Comp_Last := Comp_Last + 1;
Comp_Args (Comp_Last) := new String'(Name_Buffer (1 .. Name_Len));
-- Change to object directory of the project file, if necessary
if Project /= No_Project then
Change_To_Object_Directory (Project);
end if;
GNAT.OS_Lib.Normalize_Arguments (Comp_Args (Args'First .. Comp_Last));
Comp_Last := Comp_Last + 1;
Comp_Args (Comp_Last) := new String'("-gnatez");
Display (Gcc.all, Comp_Args (Args'First .. Comp_Last));
if Gcc_Path = null then
Make_Failed ("error, unable to locate " & Gcc.all);
end if;
return
GNAT.OS_Lib.Non_Blocking_Spawn
(Gcc_Path.all, Comp_Args (Args'First .. Comp_Last));
end Compile;
-------------------------------
-- Fill_Queue_From_ALI_Files --
-------------------------------
procedure Fill_Queue_From_ALI_Files is
ALI_P : ALI_Project;
ALI : ALI_Id;
Source_Index : Int;
Sfile : File_Name_Type;
Sid : Prj.Source_Id;
Uname : Unit_Name_Type;
Unit_Name : Name_Id;
Uid : Prj.Unit_Index;
begin
while Good_ALI_Present loop
ALI_P := Get_Next_Good_ALI;
ALI := ALI_P.ALI;
Source_Index := Unit_Index_Of (ALIs.Table (ALI_P.ALI).Afile);
-- If we are processing the library file corresponding to the
-- main source file check if this source can be a main unit.
if ALIs.Table (ALI).Sfile = Main_Source
and then Source_Index = Main_Index
then
Main_Unit := ALIs.Table (ALI).Main_Program /= None;
end if;
-- The following adds the standard library (s-stalib) to the list
-- of files to be handled by gnatmake: this file and any files it
-- depends on are always included in every bind, even if they are
-- not in the explicit dependency list. Of course, it is not added
-- if Suppress_Standard_Library is True.
-- However, to avoid annoying output about s-stalib.ali being read
-- only, when "-v" is used, we add the standard library only when
-- "-a" is used.
if Need_To_Check_Standard_Library then
Check_Standard_Library;
end if;
-- Now insert in the Q the unmarked source files (i.e. those which
-- have never been inserted in the Q and hence never considered).
-- Only do that if Unique_Compile is False.
if not Unique_Compile then
for J in
ALIs.Table (ALI).First_Unit .. ALIs.Table (ALI).Last_Unit
loop
for K in
Units.Table (J).First_With .. Units.Table (J).Last_With
loop
Sfile := Withs.Table (K).Sfile;
Uname := Withs.Table (K).Uname;
Sid := No_Source;
-- If project files are used, find the proper source to
-- compile in case Sfile is the spec but there is a body.
if Main_Project /= No_Project then
Get_Name_String (Uname);
Name_Len := Name_Len - 2;
Unit_Name := Name_Find;
Uid :=
Units_Htable.Get (Project_Tree.Units_HT, Unit_Name);
if Uid /= Prj.No_Unit_Index then
if Uid.File_Names (Impl) /= null
and then not Uid.File_Names (Impl).Locally_Removed
then
Sfile := Uid.File_Names (Impl).File;
Source_Index := Uid.File_Names (Impl).Index;
Sid := Uid.File_Names (Impl);
elsif Uid.File_Names (Spec) /= null
and then not Uid.File_Names (Spec).Locally_Removed
then
Sfile := Uid.File_Names (Spec).File;
Source_Index := Uid.File_Names (Spec).Index;
Sid := Uid.File_Names (Spec);
end if;
end if;
end if;
Dependencies.Append ((ALIs.Table (ALI).Sfile, Sfile));
if Is_In_Obsoleted (Sfile) then
Executable_Obsolete := True;
end if;
if Sfile = No_File then
Debug_Msg ("Skipping generic:", Withs.Table (K).Uname);
else
Source_Index := Unit_Index_Of (Withs.Table (K).Afile);
if not (Check_Readonly_Files or Must_Compile)
and then Is_Internal_File_Name (Sfile, False)
then
Debug_Msg ("Skipping internal file:", Sfile);
else
Queue.Insert
((Format => Format_Gnatmake,
File => Sfile,
Project => ALI_P.Project,
Unit => Withs.Table (K).Uname,
Index => Source_Index,
Sid => Sid));
end if;
end if;
end loop;
end loop;
end if;
end loop;
end Fill_Queue_From_ALI_Files;
----------------------
-- Get_Mapping_File --
----------------------
procedure Get_Mapping_File (Project : Project_Id) is
Data : Project_Compilation_Access;
begin
Data := Project_Compilation_Htable.Get (Project_Compilation, Project);
-- If there is a mapping file ready to be reused, reuse it
if Data.Last_Free_Indexes > 0 then
Mfile := Data.Free_Mapping_File_Indexes (Data.Last_Free_Indexes);
Data.Last_Free_Indexes := Data.Last_Free_Indexes - 1;
-- Otherwise, create and initialize a new one
else
Init_Mapping_File
(Project => Project, Data => Data.all, File_Index => Mfile);
end if;
-- Put the name in the mapping file argument for the invocation
-- of the compiler.
Free (Mapping_File_Arg);
Mapping_File_Arg :=
new String'("-gnatem=" &
Get_Name_String (Data.Mapping_File_Names (Mfile)));
end Get_Mapping_File;
-----------------------
-- Get_Next_Good_ALI --
-----------------------
function Get_Next_Good_ALI return ALI_Project is
ALIP : ALI_Project;
begin
pragma Assert (Good_ALI_Present);
ALIP := Good_ALI.Table (Good_ALI.Last);
Good_ALI.Decrement_Last;
return ALIP;
end Get_Next_Good_ALI;
----------------------
-- Good_ALI_Present --
----------------------
function Good_ALI_Present return Boolean is
begin
return Good_ALI.First <= Good_ALI.Last;
end Good_ALI_Present;
--------------------------------
-- Must_Exit_Because_Of_Error --
--------------------------------
function Must_Exit_Because_Of_Error return Boolean is
Data : Compilation_Data;
Success : Boolean;
begin
if Bad_Compilation_Count > 0 and then not Keep_Going then
while Outstanding_Compiles > 0 loop
Await_Compile (Data, Success);
if not Success then
Record_Failure (Data.Full_Source_File, Data.Source_Unit);
end if;
end loop;
return True;
end if;
return False;
end Must_Exit_Because_Of_Error;
--------------------
-- Record_Failure --
--------------------
procedure Record_Failure
(File : File_Name_Type;
Unit : Unit_Name_Type;
Found : Boolean := True)
is
begin
Bad_Compilation.Increment_Last;
Bad_Compilation.Table (Bad_Compilation.Last) := (File, Unit, Found);
end Record_Failure;
---------------------
-- Record_Good_ALI --
---------------------
procedure Record_Good_ALI (A : ALI_Id; Project : Project_Id) is
begin
Good_ALI.Increment_Last;
Good_ALI.Table (Good_ALI.Last) := (A, Project);
end Record_Good_ALI;
-------------------------------
-- Start_Compile_If_Possible --
-------------------------------
function Start_Compile_If_Possible
(Args : Argument_List) return Boolean
is
In_Lib_Dir : Boolean;
Need_To_Compile : Boolean;
Pid : Process_Id := Invalid_Pid;
Process_Created : Boolean;
Source : Queue.Source_Info;
Full_Source_File : File_Name_Type := No_File;
Source_File_Attr : aliased File_Attributes;
-- The full name of the source file and its attributes (size, ...)
Lib_File : File_Name_Type;
Full_Lib_File : File_Name_Type := No_File;
Lib_File_Attr : aliased File_Attributes;
Read_Only : Boolean := False;
ALI : ALI_Id;
-- The ALI file and its attributes (size, stamp, ...)
Obj_File : File_Name_Type;
Obj_Stamp : Time_Stamp_Type;
-- The object file
Found : Boolean;
begin
if not Queue.Is_Virtually_Empty and then
Outstanding_Compiles < Max_Process
then
Queue.Extract (Found, Source);
-- If it is a source in a project, first look for the ALI file
-- in the object directory. When the project is extending another
-- the ALI file may not be found, but the source does not
-- necessarily need to be compiled, as it may already be up to
-- date in the project being extended. In this case, look for an
-- ALI file in all the object directories, as is done when
-- gnatmake is not invoked with a project file.
if Source.Sid /= No_Source then
Initialize_Source_Record (Source.Sid);
Full_Source_File :=
File_Name_Type (Source.Sid.Path.Display_Name);
Lib_File := Source.Sid.Dep_Name;
Full_Lib_File := File_Name_Type (Source.Sid.Dep_Path);
Lib_File_Attr := Unknown_Attributes;
if Full_Lib_File /= No_File then
declare
FLF : constant String :=
Get_Name_String (Full_Lib_File) & ASCII.NUL;
begin
if not Is_Regular_File
(FLF'Address, Lib_File_Attr'Access)
then
Full_Lib_File := No_File;
end if;
end;
end if;
end if;
if Full_Lib_File = No_File then
Osint.Full_Source_Name
(Source.File,
Full_File => Full_Source_File,
Attr => Source_File_Attr'Access);
Lib_File := Osint.Lib_File_Name (Source.File, Source.Index);
Osint.Full_Lib_File_Name
(Lib_File,
Lib_File => Full_Lib_File,
Attr => Lib_File_Attr);
end if;
-- If source has already been compiled, executable is obsolete
if Is_In_Obsoleted (Source.File) then
Executable_Obsolete := True;
end if;
In_Lib_Dir := Full_Lib_File /= No_File
and then In_Ada_Lib_Dir (Full_Lib_File);
-- Since the following requires a system call, we precompute it
-- when needed.
if not In_Lib_Dir then
if Full_Lib_File /= No_File
and then not (Check_Readonly_Files or else Must_Compile)
then
Get_Name_String (Full_Lib_File);
Name_Buffer (Name_Len + 1) := ASCII.NUL;
Read_Only := not Is_Writable_File
(Name_Buffer'Address, Lib_File_Attr'Access);
else
Read_Only := False;
end if;
end if;
-- If the library file is an Ada library skip it
if In_Lib_Dir then
Verbose_Msg
(Lib_File,
"is in an Ada library",
Prefix => " ",
Minimum_Verbosity => Opt.High);
-- If the library file is a read-only library skip it, but only
-- if, when using project files, this library file is in the
-- right object directory (a read-only ALI file in the object
-- directory of a project being extended must not be skipped).
elsif Read_Only
and then Is_In_Object_Directory (Source.File, Full_Lib_File)
then
Verbose_Msg
(Lib_File,
"is a read-only library",
Prefix => " ",
Minimum_Verbosity => Opt.High);
-- The source file that we are checking cannot be located
elsif Full_Source_File = No_File then
Record_Failure (Source.File, Source.Unit, False);
-- Source and library files can be located but are internal
-- files.
elsif not (Check_Readonly_Files or else Must_Compile)
and then Full_Lib_File /= No_File
and then Is_Internal_File_Name (Source.File, False)
then
if Force_Compilations then
Fail
("not allowed to compile """ &
Get_Name_String (Source.File) &
"""; use -a switch, or use the compiler directly with "
& "the ""-gnatg"" switch");
end if;
Verbose_Msg
(Lib_File,
"is an internal library",
Prefix => " ",
Minimum_Verbosity => Opt.High);
-- The source file that we are checking can be located
else
Collect_Arguments
(Source.File, Source.File = Main_Source, Args);
-- Do nothing if project of source is externally built
if Arguments_Project = No_Project
or else not Arguments_Project.Externally_Built
or else Must_Compile
then
-- Don't waste any time if we have to recompile anyway
Obj_Stamp := Empty_Time_Stamp;
Need_To_Compile := Force_Compilations;
if not Force_Compilations then
Check (Source_File => Source.File,
Is_Main_Source => Source.File = Main_Source,
The_Args => Args,
Lib_File => Lib_File,
Full_Lib_File => Full_Lib_File,
Lib_File_Attr => Lib_File_Attr'Access,
Read_Only => Read_Only,
ALI => ALI,
O_File => Obj_File,
O_Stamp => Obj_Stamp);
Need_To_Compile := (ALI = No_ALI_Id);
end if;
if not Need_To_Compile then
-- The ALI file is up-to-date; record its Id
Record_Good_ALI (ALI, Arguments_Project);
-- Record the time stamp of the most recent object
-- file as long as no (re)compilations are needed.
if First_Compiled_File = No_File
and then (Most_Recent_Obj_File = No_File
or else Obj_Stamp > Most_Recent_Obj_Stamp)
then
Most_Recent_Obj_File := Obj_File;
Most_Recent_Obj_Stamp := Obj_Stamp;
end if;
else
-- Check that switch -x has been used if a source outside
-- of project files need to be compiled.
if Main_Project /= No_Project
and then Arguments_Project = No_Project
and then not External_Unit_Compilation_Allowed
then
Make_Failed ("external source ("
& Get_Name_String (Source.File)
& ") is not part of any project;"
& " cannot be compiled without"
& " gnatmake switch -x");
end if;
-- Is this the first file we have to compile?
if First_Compiled_File = No_File then
First_Compiled_File := Full_Source_File;
Most_Recent_Obj_File := No_File;
if Do_Not_Execute then
-- Exit the main loop
return True;
end if;
end if;
-- Compute where the ALI file must be generated in
-- In_Place_Mode (this does not require to know the
-- location of the object directory).
if In_Place_Mode then
if Full_Lib_File = No_File then
-- If the library file was not found, then save
-- the library file near the source file.
Lib_File :=
Osint.Lib_File_Name
(Full_Source_File, Source.Index);
Full_Lib_File := Lib_File;
else
-- If the library file was found, then save the
-- library file in the same place.
Lib_File := Full_Lib_File;
end if;
end if;
-- Start the compilation and record it. We can do this
-- because there is at least one free process. This might
-- change the current directory.
Collect_Arguments_And_Compile
(Full_Source_File => Full_Source_File,
Lib_File => Lib_File,
Source_Index => Source.Index,
Pid => Pid,
Process_Created => Process_Created);
-- Compute where the ALI file will be generated (for
-- cases that might require to know the current
-- directory). The current directory might be changed
-- when compiling other files so we cannot rely on it
-- being the same to find the resulting ALI file.
if not In_Place_Mode then
-- Compute the expected location of the ALI file. This
-- can be from several places:
-- -i => in place mode. In such a case,
-- Full_Lib_File has already been set above
-- -D => if specified
-- or defaults in current dir
-- We could simply use a call similar to
-- Osint.Full_Lib_File_Name (Lib_File)
-- but that involves system calls and is thus slower
if Object_Directory_Path /= null then
Name_Len := 0;
Add_Str_To_Name_Buffer (Object_Directory_Path.all);
Add_Str_To_Name_Buffer (Get_Name_String (Lib_File));
Full_Lib_File := Name_Find;
else
if Project_Of_Current_Object_Directory /=
No_Project
then
Get_Name_String
(Project_Of_Current_Object_Directory
.Object_Directory.Display_Name);
Add_Str_To_Name_Buffer
(Get_Name_String (Lib_File));
Full_Lib_File := Name_Find;
else
Full_Lib_File := Lib_File;
end if;
end if;
end if;
Lib_File_Attr := Unknown_Attributes;
-- Make sure we could successfully start the compilation
if Process_Created then
if Pid = Invalid_Pid then
Record_Failure (Full_Source_File, Source.Unit);
else
Add_Process
(Pid => Pid,
Sfile => Full_Source_File,
Afile => Lib_File,
Uname => Source.Unit,
Mfile => Mfile,
Full_Lib_File => Full_Lib_File,
Lib_File_Attr => Lib_File_Attr);
end if;
end if;
end if;
end if;
end if;
end if;
return False;
end Start_Compile_If_Possible;
-----------------------------
-- Wait_For_Available_Slot --
-----------------------------
procedure Wait_For_Available_Slot is
Compilation_OK : Boolean;
Text : Text_Buffer_Ptr;
ALI : ALI_Id;
Data : Compilation_Data;
begin
if Outstanding_Compiles = Max_Process
or else (Queue.Is_Virtually_Empty
and then not Good_ALI_Present
and then Outstanding_Compiles > 0)
then
Await_Compile (Data, Compilation_OK);
if not Compilation_OK then
Record_Failure (Data.Full_Source_File, Data.Source_Unit);
end if;
if Compilation_OK or else Keep_Going then
-- Re-read the updated library file
declare
Saved_Object_Consistency : constant Boolean :=
Check_Object_Consistency;
begin
-- If compilation was not OK, or if output is not an object
-- file and we don't do the bind step, don't check for
-- object consistency.
Check_Object_Consistency :=
Check_Object_Consistency
and Compilation_OK
and (Output_Is_Object or Do_Bind_Step);
Text :=
Read_Library_Info_From_Full
(Data.Full_Lib_File, Data.Lib_File_Attr'Access);
-- Restore Check_Object_Consistency to its initial value
Check_Object_Consistency := Saved_Object_Consistency;
end;
-- If an ALI file was generated by this compilation, scan the
-- ALI file and record it.
-- If the scan fails, a previous ali file is inconsistent with
-- the unit just compiled.
if Text /= null then
ALI :=
Scan_ALI
(Data.Lib_File, Text, Ignore_ED => False, Err => True);
if ALI = No_ALI_Id then
-- Record a failure only if not already done
if Compilation_OK then
Inform
(Data.Lib_File,
"incompatible ALI file, please recompile");
Record_Failure
(Data.Full_Source_File, Data.Source_Unit);
end if;
else
Record_Good_ALI (ALI, Data.Project);
end if;
Free (Text);
-- If we could not read the ALI file that was just generated
-- then there could be a problem reading either the ALI or the
-- corresponding object file (if Check_Object_Consistency is
-- set Read_Library_Info checks that the time stamp of the
-- object file is more recent than that of the ALI). However,
-- we record a failure only if not already done.
else
if Compilation_OK and not Syntax_Only then
Inform
(Data.Lib_File,
"WARNING: ALI or object file not found after compile");
if not Is_Regular_File
(Get_Name_String (Name_Id (Data.Full_Lib_File)))
then
Inform (Data.Full_Lib_File, "not found");
end if;
Record_Failure (Data.Full_Source_File, Data.Source_Unit);
end if;
end if;
end if;
end if;
end Wait_For_Available_Slot;
-- Start of processing for Compile_Sources
begin
pragma Assert (Args'First = 1);
Outstanding_Compiles := 0;
Running_Compile := new Comp_Data_Arr (1 .. Max_Process);
-- Package and Queue initializations
Good_ALI.Init;
if Initialize_ALI_Data then
Initialize_ALI;
Initialize_ALI_Source;
end if;
-- The following two flags affect the behavior of ALI.Set_Source_Table.
-- We set Check_Source_Files to True to ensure that source file time
-- stamps are checked, and we set All_Sources to False to avoid checking
-- the presence of the source files listed in the source dependency
-- section of an ali file (which would be a mistake since the ali file
-- may be obsolete).
Check_Source_Files := True;
All_Sources := False;
Queue.Insert
((Format => Format_Gnatmake,
File => Main_Source,
Project => Main_Project,
Unit => No_Unit_Name,
Index => Main_Index,
Sid => No_Source));
First_Compiled_File := No_File;
Most_Recent_Obj_File := No_File;
Most_Recent_Obj_Stamp := Empty_Time_Stamp;
Main_Unit := False;
-- Keep looping until there is no more work to do (the Q is empty)
-- and all the outstanding compilations have terminated.
Make_Loop :
while not Queue.Is_Empty or else Outstanding_Compiles > 0 loop
exit Make_Loop when Must_Exit_Because_Of_Error;
exit Make_Loop when Start_Compile_If_Possible (Args);
Wait_For_Available_Slot;
-- ??? Should be done as soon as we add a Good_ALI, wouldn't it avoid
-- the need for a list of good ALI?
Fill_Queue_From_ALI_Files;
if Display_Compilation_Progress then
Write_Str ("completed ");
Write_Int (Int (Queue.Processed));
Write_Str (" out of ");
Write_Int (Int (Queue.Size));
Write_Str (" (");
Write_Int (Int ((Queue.Processed * 100) / Queue.Size));
Write_Str ("%)...");
Write_Eol;
end if;
end loop Make_Loop;
Compilation_Failures := Bad_Compilation_Count;
-- Compilation is finished
-- Delete any temporary configuration pragma file
if not Keep_Temporary_Files then
Delete_Temp_Config_Files (Project_Tree);
end if;
end Compile_Sources;
----------------------------------
-- Configuration_Pragmas_Switch --
----------------------------------
function Configuration_Pragmas_Switch
(For_Project : Project_Id) return Argument_List
is
The_Packages : Package_Id;
Gnatmake : Package_Id;
Compiler : Package_Id;
Global_Attribute : Variable_Value := Nil_Variable_Value;
Local_Attribute : Variable_Value := Nil_Variable_Value;
Global_Attribute_Present : Boolean := False;
Local_Attribute_Present : Boolean := False;
Result : Argument_List (1 .. 3);
Last : Natural := 0;
begin
Prj.Env.Create_Config_Pragmas_File
(For_Project, Project_Tree);
if For_Project.Config_File_Name /= No_Path then
Temporary_Config_File := For_Project.Config_File_Temp;
Last := 1;
Result (1) :=
new String'
("-gnatec=" & Get_Name_String (For_Project.Config_File_Name));
else
Temporary_Config_File := False;
end if;
-- Check for attribute Builder'Global_Configuration_Pragmas
The_Packages := Main_Project.Decl.Packages;
Gnatmake :=
Prj.Util.Value_Of
(Name => Name_Builder,
In_Packages => The_Packages,
Shared => Project_Tree.Shared);
if Gnatmake /= No_Package then
Global_Attribute := Prj.Util.Value_Of
(Variable_Name => Name_Global_Configuration_Pragmas,
In_Variables => Project_Tree.Shared.Packages.Table
(Gnatmake).Decl.Attributes,
Shared => Project_Tree.Shared);
Global_Attribute_Present :=
Global_Attribute /= Nil_Variable_Value
and then Get_Name_String (Global_Attribute.Value) /= "";
if Global_Attribute_Present then
declare
Path : constant String :=
Absolute_Path
(Path_Name_Type (Global_Attribute.Value),
Global_Attribute.Project);
begin
if not Is_Regular_File (Path) then
if Debug.Debug_Flag_F then
Make_Failed
("cannot find configuration pragmas file "
& File_Name (Path));
else
Make_Failed
("cannot find configuration pragmas file " & Path);
end if;
end if;
Last := Last + 1;
Result (Last) := new String'("-gnatec=" & Path);
end;
end if;
end if;
-- Check for attribute Compiler'Local_Configuration_Pragmas
The_Packages := For_Project.Decl.Packages;
Compiler :=
Prj.Util.Value_Of
(Name => Name_Compiler,
In_Packages => The_Packages,
Shared => Project_Tree.Shared);
if Compiler /= No_Package then
Local_Attribute := Prj.Util.Value_Of
(Variable_Name => Name_Local_Configuration_Pragmas,
In_Variables => Project_Tree.Shared.Packages.Table
(Compiler).Decl.Attributes,
Shared => Project_Tree.Shared);
Local_Attribute_Present :=
Local_Attribute /= Nil_Variable_Value
and then Get_Name_String (Local_Attribute.Value) /= "";
if Local_Attribute_Present then
declare
Path : constant String :=
Absolute_Path
(Path_Name_Type (Local_Attribute.Value),
Local_Attribute.Project);
begin
if not Is_Regular_File (Path) then
if Debug.Debug_Flag_F then
Make_Failed
("cannot find configuration pragmas file "
& File_Name (Path));
else
Make_Failed
("cannot find configuration pragmas file " & Path);
end if;
end if;
Last := Last + 1;
Result (Last) := new String'("-gnatec=" & Path);
end;
end if;
end if;
return Result (1 .. Last);
end Configuration_Pragmas_Switch;
---------------
-- Debug_Msg --
---------------
procedure Debug_Msg (S : String; N : Name_Id) is
begin
if Debug.Debug_Flag_W then
Write_Str (" ... ");
Write_Str (S);
Write_Str (" ");
Write_Name (N);
Write_Eol;
end if;
end Debug_Msg;
procedure Debug_Msg (S : String; N : File_Name_Type) is
begin
Debug_Msg (S, Name_Id (N));
end Debug_Msg;
procedure Debug_Msg (S : String; N : Unit_Name_Type) is
begin
Debug_Msg (S, Name_Id (N));
end Debug_Msg;
-------------
-- Display --
-------------
procedure Display (Program : String; Args : Argument_List) is
begin
pragma Assert (Args'First = 1);
if Display_Executed_Programs then
Write_Str (Program);
for J in Args'Range loop
-- Never display -gnatea nor -gnatez
if Args (J).all /= "-gnatea"
and then
Args (J).all /= "-gnatez"
then
-- Do not display the mapping file argument automatically
-- created when using a project file.
if Main_Project = No_Project
or else Opt.Keep_Temporary_Files
or else Args (J)'Length < 8
or else
Args (J) (Args (J)'First .. Args (J)'First + 6) /= "-gnatem"
then
-- When -dn is not specified, do not display the config
-- pragmas switch (-gnatec) for the temporary file created
-- by the project manager (always the first -gnatec switch).
-- Reset Temporary_Config_File to False so that the eventual
-- other -gnatec switches will be displayed.
if not Opt.Keep_Temporary_Files
and then Temporary_Config_File
and then Args (J)'Length > 7
and then Args (J) (Args (J)'First .. Args (J)'First + 6) =
"-gnatec"
then
Temporary_Config_File := False;
-- Do not display the -F=mapping_file switch for gnatbind
-- if -dn is not specified.
elsif Opt.Keep_Temporary_Files
or else Args (J)'Length < 4
or else
Args (J) (Args (J)'First .. Args (J)'First + 2) /= "-F="
then
Write_Str (" ");
-- If -df is used, only display file names, not path
-- names.
if Debug.Debug_Flag_F then
declare
Equal_Pos : Natural;
begin
Equal_Pos := Args (J)'First - 1;
for K in Args (J)'Range loop
if Args (J) (K) = '=' then
Equal_Pos := K;
exit;
end if;
end loop;
if Is_Absolute_Path
(Args (J) (Equal_Pos + 1 .. Args (J)'Last))
then
Write_Str
(Args (J) (Args (J)'First .. Equal_Pos));
Write_Str
(File_Name
(Args (J)
(Equal_Pos + 1 .. Args (J)'Last)));
else
Write_Str (Args (J).all);
end if;
end;
else
Write_Str (Args (J).all);
end if;
end if;
end if;
end if;
end loop;
Write_Eol;
end if;
end Display;
----------------------
-- Display_Commands --
----------------------
procedure Display_Commands (Display : Boolean := True) is
begin
Display_Executed_Programs := Display;
end Display_Commands;
--------------------------
-- Enter_Into_Obsoleted --
--------------------------
procedure Enter_Into_Obsoleted (F : File_Name_Type) is
Name : constant String := Get_Name_String (F);
First : Natural;
F2 : File_Name_Type;
begin
First := Name'Last;
while First > Name'First
and then not Is_Directory_Separator (Name (First - 1))
loop
First := First - 1;
end loop;
if First /= Name'First then
Name_Len := 0;
Add_Str_To_Name_Buffer (Name (First .. Name'Last));
F2 := Name_Find;
else
F2 := F;
end if;
Debug_Msg ("New entry in Obsoleted table:", F2);
Obsoleted.Set (F2, True);
end Enter_Into_Obsoleted;
---------------
-- Globalize --
---------------
procedure Globalize (Success : out Boolean) is
Quiet_Str : aliased String := "-quiet";
Globalizer_Args : constant Argument_List :=
(1 => Quiet_Str'Unchecked_Access);
Previous_Dir : String_Access;
procedure Globalize_Dir (Dir : String);
-- Call CodePeer globalizer on Dir
-------------------
-- Globalize_Dir --
-------------------
procedure Globalize_Dir (Dir : String) is
Result : Boolean;
begin
if Previous_Dir = null or else Dir /= Previous_Dir.all then
Free (Previous_Dir);
Previous_Dir := new String'(Dir);
Change_Dir (Dir);
GNAT.OS_Lib.Spawn (Globalizer_Path.all, Globalizer_Args, Result);
Success := Success and Result;
end if;
end Globalize_Dir;
procedure Globalize_Dirs is new
Prj.Env.For_All_Object_Dirs (Globalize_Dir);
-- Start of procedure Globalize
begin
Success := True;
Display (Globalizer, Globalizer_Args);
if Globalizer_Path = null then
Make_Failed ("error, unable to locate " & Globalizer);
end if;
if Main_Project = No_Project then
GNAT.OS_Lib.Spawn (Globalizer_Path.all, Globalizer_Args, Success);
else
Globalize_Dirs (Main_Project, Project_Tree);
end if;
end Globalize;
-------------------
-- Linking_Phase --
-------------------
procedure Linking_Phase
(Non_Std_Executable : Boolean := False;
Executable : File_Name_Type := No_File;
Main_ALI_File : File_Name_Type)
is
Linker_Switches_Last : constant Integer := Linker_Switches.Last;
Path_Option : constant String_Access :=
MLib.Linker_Library_Path_Option;
Libraries_Present : Boolean := False;
Current : Natural;
Proj2 : Project_Id;
Depth : Natural;
Proj1 : Project_List;
begin
if not Run_Path_Option then
Linker_Switches.Increment_Last;
Linker_Switches.Table (Linker_Switches.Last) :=
new String'("-R");
end if;
if Main_Project /= No_Project then
Library_Paths.Set_Last (0);
Library_Projs.Init;
if MLib.Tgt.Support_For_Libraries /= Prj.None then
-- Check for library projects
Proj1 := Project_Tree.Projects;
while Proj1 /= null loop
if Proj1.Project /= Main_Project
and then Proj1.Project.Library
then
-- Add this project to table Library_Projs
Libraries_Present := True;
Depth := Proj1.Project.Depth;
Library_Projs.Increment_Last;
Current := Library_Projs.Last;
-- Any project with a greater depth should be after this
-- project in the list.
while Current > 1 loop
Proj2 := Library_Projs.Table (Current - 1);
exit when Proj2.Depth <= Depth;
Library_Projs.Table (Current) := Proj2;
Current := Current - 1;
end loop;
Library_Projs.Table (Current) := Proj1.Project;
-- If it is not a static library and path option is set, add
-- it to the Library_Paths table.
if Proj1.Project.Library_Kind /= Static
and then Proj1.Project.Extended_By = No_Project
and then Path_Option /= null
then
Library_Paths.Increment_Last;
Library_Paths.Table (Library_Paths.Last) :=
new String'
(Get_Name_String
(Proj1.Project.Library_Dir.Display_Name));
end if;
end if;
Proj1 := Proj1.Next;
end loop;
for Index in 1 .. Library_Projs.Last loop
if Library_Projs.Table (Index).Extended_By = No_Project then
if Library_Projs.Table (Index).Library_Kind = Static then
Linker_Switches.Increment_Last;
Linker_Switches.Table (Linker_Switches.Last) :=
new String'
(Get_Name_String
(Library_Projs.Table
(Index).Library_Dir.Display_Name) &
"lib" &
Get_Name_String
(Library_Projs.Table (Index).Library_Name) &
"." &
MLib.Tgt.Archive_Ext);
else
-- Add the -L switch
Linker_Switches.Increment_Last;
Linker_Switches.Table (Linker_Switches.Last) :=
new String'("-L" &
Get_Name_String (Library_Projs.Table (Index).
Library_Dir.Display_Name));
-- Add the -l switch
Linker_Switches.Increment_Last;
Linker_Switches.Table (Linker_Switches.Last) :=
new String'("-l" &
Get_Name_String
(Library_Projs.Table (Index).Library_Name));
end if;
end if;
end loop;
end if;
if Libraries_Present then
-- If Path_Option is not null, create the switch ("-Wl,-rpath,"
-- or equivalent) with all the non-static library dirs plus the
-- standard GNAT library dir. We do that only if Run_Path_Option
-- is True (not disabled by -R switch).
if Run_Path_Option and then Path_Option /= null then
declare
Option : String_Access;
Length : Natural := Path_Option'Length;
Current : Natural;
begin
if MLib.Separate_Run_Path_Options then
-- We are going to create one switch of the form
-- "-Wl,-rpath,dir_N" for each directory to
-- consider.
-- One switch for each library directory