;; Scheduling description for Alpha EV4. ;; Copyright (C) 2002-2015 Free Software Foundation, Inc. ;; ;; This file is part of GCC. ;; ;; GCC is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 3, or (at your option) ;; any later version. ;; ;; GCC is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; ;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; http://www.gnu.org/licenses/.

; On EV4 there are two classes of resources to consider: resources needed ; to issue, and resources needed to execute. IBUS[01] are in the first ; category. ABOX, BBOX, EBOX, FBOX, IMUL & FDIV make up the second. ; (There are a few other register-like resources, but ...)

(define_automaton “ev4_0,ev4_1,ev4_2”) (define_cpu_unit “ev4_ib0,ev4_ib1,ev4_abox,ev4_bbox” “ev4_0”) (define_cpu_unit “ev4_ebox,ev4_imul” “ev4_1”) (define_cpu_unit “ev4_fbox,ev4_fdiv” “ev4_2”) (define_reservation “ev4_ib01” “ev4_ib0|ev4_ib1”)

; Assume type “multi” single issues. (define_insn_reservation “ev4_multi” 1 (and (eq_attr “tune” “ev4”) (eq_attr “type” “multi”)) “ev4_ib0+ev4_ib1”)

; Loads from L0 completes in three cycles. adjust_cost still factors ; in user-specified memory latency, so return 1 here. (define_insn_reservation “ev4_ld” 1 (and (eq_attr “tune” “ev4”) (eq_attr “type” “ild,fld,ldsym,ld_l”)) “ev4_ib01+ev4_abox”)

; Stores can issue before the data (but not address) is ready. (define_insn_reservation “ev4_ist” 1 (and (eq_attr “tune” “ev4”) (eq_attr “type” “ist”)) “ev4_ib1+ev4_abox”)

; ??? Separate from ev4_ist because store_data_bypass_p can't handle ; the patterns with multiple sets, like store-conditional. (define_insn_reservation “ev4_ist_c” 1 (and (eq_attr “tune” “ev4”) (eq_attr “type” “st_c”)) “ev4_ib1+ev4_abox”)

(define_insn_reservation “ev4_fst” 1 (and (eq_attr “tune” “ev4”) (eq_attr “type” “fst”)) “ev4_ib0+ev4_abox”)

; Memory barrier blocks ABOX insns until it's acknowledged by the external ; memory bus. This may be quite slow. Setting this to 4 cycles gets ; about all the benefit without making the DFA too large. (define_insn_reservation “ev4_mb” 4 (and (eq_attr “tune” “ev4”) (eq_attr “type” “mb”)) “ev4_ib1+ev4_abox,ev4_abox*3”)

; Branches have no delay cost, but do tie up the unit for two cycles. (define_insn_reservation “ev4_ibr” 2 (and (eq_attr “tune” “ev4”) (eq_attr “type” “ibr,jsr”)) “ev4_ib1+ev4_bbox,ev4_bbox”)

(define_insn_reservation “ev4_callpal” 2 (and (eq_attr “tune” “ev4”) (eq_attr “type” “callpal”)) “ev4_ib1+ev4_bbox,ev4_bbox”)

(define_insn_reservation “ev4_fbr” 2 (and (eq_attr “tune” “ev4”) (eq_attr “type” “fbr”)) “ev4_ib0+ev4_bbox,ev4_bbox”)

; Arithmetic insns are normally have their results available after ; two cycles. There are a number of exceptions.

(define_insn_reservation “ev4_iaddlog” 2 (and (eq_attr “tune” “ev4”) (eq_attr “type” “iadd,ilog”)) “ev4_ib0+ev4_ebox”)

(define_bypass 1 “ev4_iaddlog” “ev4_ibr,ev4_iaddlog,ev4_shiftcm,ev4_icmp,ev4_imulsi,ev4_imuldi”)

(define_insn_reservation “ev4_shiftcm” 2 (and (eq_attr “tune” “ev4”) (eq_attr “type” “shift,icmov”)) “ev4_ib0+ev4_ebox”)

(define_insn_reservation “ev4_icmp” 2 (and (eq_attr “tune” “ev4”) (eq_attr “type” “icmp”)) “ev4_ib0+ev4_ebox”)

(define_bypass 1 “ev4_icmp” “ev4_ibr”)

(define_bypass 0 “ev4_iaddlog,ev4_shiftcm,ev4_icmp” “ev4_ist” “store_data_bypass_p”)

; Multiplies use a non-pipelined imul unit. Also, “no [ebox] insn can ; be issued exactly three cycles before an integer multiply completes”.

(define_insn_reservation “ev4_imulsi” 21 (and (eq_attr “tune” “ev4”) (and (eq_attr “type” “imul”) (eq_attr “opsize” “si”))) “ev4_ib0+ev4_imul,ev4_imul*18,ev4_ebox”)

(define_bypass 20 “ev4_imulsi” “ev4_ist” “store_data_bypass_p”)

(define_insn_reservation “ev4_imuldi” 23 (and (eq_attr “tune” “ev4”) (and (eq_attr “type” “imul”) (eq_attr “opsize” “!si”))) “ev4_ib0+ev4_imul,ev4_imul*20,ev4_ebox”)

(define_bypass 22 “ev4_imuldi” “ev4_ist” “store_data_bypass_p”)

; Most FP insns have a 6 cycle latency, but with a 4 cycle bypass back in. (define_insn_reservation “ev4_fpop” 6 (and (eq_attr “tune” “ev4”) (eq_attr “type” “fadd,fmul,fcpys,fcmov”)) “ev4_ib1+ev4_fbox”)

(define_bypass 4 “ev4_fpop” “ev4_fpop”)

; The floating point divider is not pipelined. Also, “no FPOP insn can be ; issued exactly five or exactly six cycles before an fdiv insn completes”.

(define_insn_reservation “ev4_fdivsf” 34 (and (eq_attr “tune” “ev4”) (and (eq_attr “type” “fdiv”) (eq_attr “opsize” “si”))) “ev4_ib1+ev4_fdiv,ev4_fdiv*28,ev4_fdiv+ev4_fbox,ev4_fbox”)

(define_insn_reservation “ev4_fdivdf” 63 (and (eq_attr “tune” “ev4”) (and (eq_attr “type” “fdiv”) (eq_attr “opsize” “di”))) “ev4_ib1+ev4_fdiv,ev4_fdiv*57,ev4_fdiv+ev4_fbox,ev4_fbox”)

; Traps don't consume or produce data. (define_insn_reservation “ev4_misc” 1 (and (eq_attr “tune” “ev4”) (eq_attr “type” “misc”)) “ev4_ib1”)