| /* Target Definitions for TI C6X. |
| Copyright (C) 2010-2015 Free Software Foundation, Inc. |
| Contributed by Andrew Jenner <andrew@codesourcery.com> |
| Contributed by Bernd Schmidt <bernds@codesourcery.com> |
| |
| This file is part of GCC. |
| |
| GCC is free software; you can redistribute it and/or modify it |
| under the terms of the GNU General Public License as published |
| by the Free Software Foundation; either version 3, or (at your |
| option) any later version. |
| |
| GCC is distributed in the hope that it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY |
| or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public |
| License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GCC; see the file COPYING3. If not see |
| <http://www.gnu.org/licenses/>. */ |
| |
| #ifndef GCC_C6X_H |
| #define GCC_C6X_H |
| |
| /* Feature bit definitions that enable specific insns. */ |
| #define C6X_INSNS_C62X 1 |
| #define C6X_INSNS_C64X 2 |
| #define C6X_INSNS_C64XP 4 |
| #define C6X_INSNS_C67X 8 |
| #define C6X_INSNS_C67XP 16 |
| #define C6X_INSNS_C674X 32 |
| #define C6X_INSNS_ATOMIC 64 |
| #define C6X_INSNS_ALL_CPU_BITS 127 |
| |
| #define C6X_DEFAULT_INSN_MASK \ |
| (C6X_INSNS_C62X | C6X_INSNS_C64X | C6X_INSNS_C64XP) |
| |
| /* A mask of allowed insn types, as defined above. */ |
| extern unsigned long c6x_insn_mask; |
| |
| /* Value of -march= */ |
| extern c6x_cpu_t c6x_arch; |
| #define C6X_DEFAULT_ARCH C6X_CPU_C64XP |
| |
| /* True if the target has C64x instructions. */ |
| #define TARGET_INSNS_64 ((c6x_insn_mask & C6X_INSNS_C64X) != 0) |
| /* True if the target has C64x+ instructions. */ |
| #define TARGET_INSNS_64PLUS ((c6x_insn_mask & C6X_INSNS_C64XP) != 0) |
| /* True if the target has C67x instructions. */ |
| #define TARGET_INSNS_67 ((c6x_insn_mask & C6X_INSNS_C67X) != 0) |
| /* True if the target has C67x+ instructions. */ |
| #define TARGET_INSNS_67PLUS ((c6x_insn_mask & C6X_INSNS_C67XP) != 0) |
| |
| /* True if the target supports doubleword loads. */ |
| #define TARGET_LDDW (TARGET_INSNS_64 || TARGET_INSNS_67) |
| /* True if the target supports doubleword loads. */ |
| #define TARGET_STDW TARGET_INSNS_64 |
| /* True if the target supports the MPY32 family of instructions. */ |
| #define TARGET_MPY32 TARGET_INSNS_64PLUS |
| /* True if the target has floating point hardware. */ |
| #define TARGET_FP TARGET_INSNS_67 |
| /* True if the target has C67x+ floating point extensions. */ |
| #define TARGET_FP_EXT TARGET_INSNS_67PLUS |
| |
| #define TARGET_DEFAULT 0 |
| |
| /* Run-time Target. */ |
| |
| #define TARGET_CPU_CPP_BUILTINS() \ |
| do \ |
| { \ |
| builtin_assert ("machine=tic6x"); \ |
| builtin_assert ("cpu=tic6x"); \ |
| builtin_define ("__TMS320C6X__"); \ |
| builtin_define ("_TMS320C6X"); \ |
| \ |
| if (TARGET_DSBT) \ |
| builtin_define ("__DSBT__"); \ |
| \ |
| if (TARGET_BIG_ENDIAN) \ |
| builtin_define ("_BIG_ENDIAN"); \ |
| else \ |
| builtin_define ("_LITTLE_ENDIAN"); \ |
| \ |
| switch (c6x_arch) \ |
| { \ |
| case C6X_CPU_C62X: \ |
| builtin_define ("_TMS320C6200"); \ |
| break; \ |
| \ |
| case C6X_CPU_C64XP: \ |
| builtin_define ("_TMS320C6400_PLUS"); \ |
| /* ... fall through ... */ \ |
| case C6X_CPU_C64X: \ |
| builtin_define ("_TMS320C6400"); \ |
| break; \ |
| \ |
| case C6X_CPU_C67XP: \ |
| builtin_define ("_TMS320C6700_PLUS"); \ |
| /* ... fall through ... */ \ |
| case C6X_CPU_C67X: \ |
| builtin_define ("_TMS320C6700"); \ |
| break; \ |
| \ |
| case C6X_CPU_C674X: \ |
| builtin_define ("_TMS320C6740"); \ |
| builtin_define ("_TMS320C6700_PLUS"); \ |
| builtin_define ("_TMS320C6700"); \ |
| builtin_define ("_TMS320C6400_PLUS"); \ |
| builtin_define ("_TMS320C6400"); \ |
| break; \ |
| } \ |
| } while (0) |
| |
| #define OPTION_DEFAULT_SPECS \ |
| {"arch", "%{!march=*:-march=%(VALUE)}" } |
| |
| /* Storage Layout. */ |
| |
| #define BITS_BIG_ENDIAN 0 |
| #define BYTES_BIG_ENDIAN (TARGET_BIG_ENDIAN != 0) |
| #define WORDS_BIG_ENDIAN (TARGET_BIG_ENDIAN != 0) |
| |
| #define REG_WORDS_BIG_ENDIAN 0 |
| |
| #define UNITS_PER_WORD 4 |
| #define PARM_BOUNDARY 8 |
| #define STACK_BOUNDARY 64 |
| #define FUNCTION_BOUNDARY 32 |
| #define BIGGEST_ALIGNMENT 64 |
| #define STRICT_ALIGNMENT 1 |
| |
| /* The ABI requires static arrays must be at least 8 byte aligned. |
| Really only externally visible arrays must be aligned this way, as |
| only those are directly visible from another compilation unit. But |
| we don't have that information available here. */ |
| #define DATA_ABI_ALIGNMENT(TYPE, ALIGN) \ |
| (((ALIGN) < BITS_PER_UNIT * 8 && TREE_CODE (TYPE) == ARRAY_TYPE) \ |
| ? BITS_PER_UNIT * 8 : (ALIGN)) |
| |
| /* Type Layout. */ |
| |
| #define DEFAULT_SIGNED_CHAR 1 |
| |
| #undef SIZE_TYPE |
| #define SIZE_TYPE "unsigned int" |
| #undef PTRDIFF_TYPE |
| #define PTRDIFF_TYPE "int" |
| |
| /* Registers. */ |
| |
| #define FIRST_PSEUDO_REGISTER 67 |
| #define FIXED_REGISTERS \ |
| { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, \ |
| 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, \ |
| 1, 1, 1} |
| #define CALL_USED_REGISTERS \ |
| { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, \ |
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ |
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 1, 1, \ |
| 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, \ |
| 1, 1, 1} |
| |
| /* This lists call-used non-predicate registers first, followed by call-used |
| registers, followed by predicate registers. We want to avoid allocating |
| the predicate registers for other uses as much as possible. */ |
| #define REG_ALLOC_ORDER \ |
| { \ |
| REG_A0, REG_A3, REG_A4, REG_A5, REG_A6, REG_A7, REG_A8, REG_A9, \ |
| REG_A16, REG_A17, REG_A18, REG_A19, REG_A20, REG_A21, REG_A22, REG_A23, \ |
| REG_A24, REG_A25, REG_A26, REG_A27, REG_A28, REG_A29, REG_A30, REG_A31, \ |
| REG_B4, REG_B5, REG_B6, REG_B7, REG_B8, REG_B9, REG_B16, \ |
| REG_B17, REG_B18, REG_B19, REG_B20, REG_B21, REG_B22, REG_B23, REG_B24, \ |
| REG_B25, REG_B26, REG_B27, REG_B28, REG_B29, REG_B30, REG_B31, \ |
| REG_A10, REG_A11, REG_A12, REG_A13, REG_A14, REG_A15, \ |
| REG_B3, REG_B10, REG_B11, REG_B12, REG_B13, REG_B14, REG_B15, \ |
| REG_A1, REG_A2, REG_B0, REG_B1, REG_B2, REG_ILC \ |
| } |
| |
| #define HARD_REGNO_NREGS(regno, mode) \ |
| ((GET_MODE_SIZE (mode) + UNITS_PER_WORD - 1) \ |
| / UNITS_PER_WORD) |
| |
| #define HARD_REGNO_MODE_OK(reg, mode) (GET_MODE_SIZE (mode) <= UNITS_PER_WORD \ |
| ? 1 : ((reg) & 1) == 0) |
| |
| #define MODES_TIEABLE_P(mode1, mode2) \ |
| ((mode1) == (mode2) || \ |
| (GET_MODE_SIZE (mode1) <= UNITS_PER_WORD && \ |
| GET_MODE_SIZE (mode2) <= UNITS_PER_WORD)) |
| |
| |
| /* Register Classes. */ |
| |
| enum reg_class |
| { |
| NO_REGS, |
| PREDICATE_A_REGS, |
| PREDICATE_B_REGS, |
| PREDICATE_REGS, |
| PICREG, |
| SPREG, |
| CALL_USED_B_REGS, |
| NONPREDICATE_A_REGS, |
| NONPREDICATE_B_REGS, |
| NONPREDICATE_REGS, |
| A_REGS, |
| B_REGS, |
| GENERAL_REGS, |
| ALL_REGS, |
| LIM_REG_CLASSES |
| }; |
| |
| #define N_REG_CLASSES (int) LIM_REG_CLASSES |
| |
| #define REG_CLASS_NAMES { \ |
| "NO_REGS", \ |
| "PREDICATE_A_REGS", \ |
| "PREDICATE_B_REGS", \ |
| "PREDICATE_REGS", \ |
| "PICREG", \ |
| "SPREG", \ |
| "CALL_USED_B_REGS", \ |
| "NONPREDICATE_A_REGS", \ |
| "NONPREDICATE_B_REGS", \ |
| "NONPREDICATE_REGS", \ |
| "A_REGS", \ |
| "B_REGS", \ |
| "GENERAL_REGS", \ |
| "ALL_REGS" } |
| |
| #define REG_CLASS_CONTENTS \ |
| { \ |
| /* NO_REGS. */ \ |
| { 0x00000000, 0x00000000, 0 }, \ |
| /* PREDICATE_A_REGS. */ \ |
| { 0x00000006, 0x00000000, 0 }, \ |
| /* PREDICATE_B_REGS. */ \ |
| { 0x00000000, 0x00000007, 0 }, \ |
| /* PREDICATE_REGS. */ \ |
| { 0x00000006, 0x00000007, 0 }, \ |
| /* PICREG. */ \ |
| { 0x00000000, 0x00004000, 0 }, \ |
| /* SPREG. */ \ |
| { 0x00000000, 0x00008000, 0 }, \ |
| /* CALL_USED_B_REGS. */ \ |
| { 0x00000000, 0xFFFF03FF, 0 }, \ |
| /* NONPREDICATE_A_REGS. */ \ |
| { 0xFFFFFFF9, 0x00000000, 0 }, \ |
| /* NONPREDICATE_B_REGS. */ \ |
| { 0x00000000, 0xFFFFFFF8, 0 }, \ |
| /* NONPREDICATE_REGS. */ \ |
| { 0xFFFFFFF9, 0xFFFFFFF8, 0 }, \ |
| /* A_REGS. */ \ |
| { 0xFFFFFFFF, 0x00000000, 3 }, \ |
| /* B_REGS. */ \ |
| { 0x00000000, 0xFFFFFFFF, 3 }, \ |
| /* GENERAL_REGS. */ \ |
| { 0xFFFFFFFF, 0xFFFFFFFF, 3 }, \ |
| /* ALL_REGS. */ \ |
| { 0xFFFFFFFF, 0xFFFFFFFF, 7 }, \ |
| } |
| |
| #define A_REGNO_P(N) ((N) <= REG_A31) |
| #define B_REGNO_P(N) ((N) >= REG_B0 && (N) <= REG_B31) |
| |
| #define A_REG_P(X) (REG_P (X) && A_REGNO_P (REGNO (X))) |
| #define CROSS_OPERANDS(X0,X1) \ |
| (A_REG_P (X0) == A_REG_P (X1) ? CROSS_N : CROSS_Y) |
| |
| #define REGNO_REG_CLASS(reg) \ |
| ((reg) >= REG_A1 && (reg) <= REG_A2 ? PREDICATE_A_REGS \ |
| : (reg) == REG_A0 && TARGET_INSNS_64 ? PREDICATE_A_REGS \ |
| : (reg) >= REG_B0 && (reg) <= REG_B2 ? PREDICATE_B_REGS \ |
| : A_REGNO_P (reg) ? NONPREDICATE_A_REGS \ |
| : call_used_regs[reg] ? CALL_USED_B_REGS : B_REGS) |
| |
| #define BASE_REG_CLASS ALL_REGS |
| #define INDEX_REG_CLASS ALL_REGS |
| |
| #define REGNO_OK_FOR_BASE_STRICT_P(X) \ |
| ((X) < FIRST_PSEUDO_REGISTER \ |
| || (reg_renumber[X] >= 0 && reg_renumber[X] < FIRST_PSEUDO_REGISTER)) |
| #define REGNO_OK_FOR_BASE_NONSTRICT_P(X) 1 |
| |
| #define REGNO_OK_FOR_INDEX_STRICT_P(X) \ |
| ((X) < FIRST_PSEUDO_REGISTER \ |
| || (reg_renumber[X] >= 0 && reg_renumber[X] < FIRST_PSEUDO_REGISTER)) |
| #define REGNO_OK_FOR_INDEX_NONSTRICT_P(X) 1 |
| |
| #ifdef REG_OK_STRICT |
| #define REGNO_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_STRICT_P (X) |
| #define REGNO_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_STRICT_P (X) |
| #else |
| #define REGNO_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_NONSTRICT_P (X) |
| #define REGNO_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_NONSTRICT_P (X) |
| #endif |
| |
| #define CLASS_MAX_NREGS(class, mode) \ |
| ((GET_MODE_SIZE (mode) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) |
| |
| #define REGNO_OK_FOR_INDIRECT_JUMP_P(REGNO, MODE) B_REGNO_P (REGNO) |
| |
| /* Stack and Calling. */ |
| |
| /* SP points to 4 bytes below the first word of the frame. */ |
| #define STACK_POINTER_OFFSET 4 |
| /* Likewise for AP (which is the incoming stack pointer). */ |
| #define FIRST_PARM_OFFSET(fundecl) 4 |
| #define STARTING_FRAME_OFFSET 0 |
| #define FRAME_GROWS_DOWNWARD 1 |
| #define STACK_GROWS_DOWNWARD |
| |
| #define STACK_POINTER_REGNUM REG_B15 |
| #define HARD_FRAME_POINTER_REGNUM REG_A15 |
| /* These two always get eliminated in favour of the stack pointer |
| or the hard frame pointer. */ |
| #define FRAME_POINTER_REGNUM REG_FRAME |
| #define ARG_POINTER_REGNUM REG_ARGP |
| |
| #define PIC_OFFSET_TABLE_REGNUM REG_B14 |
| |
| /* We keep the stack pointer constant rather than using push/pop |
| instructions. */ |
| #define ACCUMULATE_OUTGOING_ARGS 1 |
| |
| /* Before the prologue, the return address is in the B3 register. */ |
| #define RETURN_ADDR_REGNO REG_B3 |
| #define INCOMING_RETURN_ADDR_RTX gen_rtx_REG (Pmode, RETURN_ADDR_REGNO) |
| #define DWARF_FRAME_RETURN_COLUMN DWARF_FRAME_REGNUM (RETURN_ADDR_REGNO) |
| |
| #define RETURN_ADDR_RTX(COUNT, FRAME) c6x_return_addr_rtx (COUNT) |
| |
| #define INCOMING_FRAME_SP_OFFSET 0 |
| #define ARG_POINTER_CFA_OFFSET(fundecl) 0 |
| |
| #define STATIC_CHAIN_REGNUM REG_A2 |
| |
| struct c6x_args { |
| /* Number of arguments to pass in registers. */ |
| int nregs; |
| /* Number of arguments passed in registers so far. */ |
| int count; |
| }; |
| |
| #define CUMULATIVE_ARGS struct c6x_args |
| |
| #define INIT_CUMULATIVE_ARGS(cum, fntype, libname, fndecl, n_named_args) \ |
| c6x_init_cumulative_args (&cum, fntype, libname, n_named_args) |
| |
| #define BLOCK_REG_PADDING(MODE, TYPE, FIRST) \ |
| (c6x_block_reg_pad_upward (MODE, TYPE, FIRST) ? upward : downward) |
| |
| #define FUNCTION_ARG_REGNO_P(r) \ |
| (((r) >= REG_A4 && (r) <= REG_A13) || ((r) >= REG_B4 && (r) <= REG_B13)) |
| |
| #define DEFAULT_PCC_STRUCT_RETURN 0 |
| |
| #define FUNCTION_PROFILER(file, labelno) \ |
| fatal_error (input_location, \ |
| "profiling is not yet implemented for this architecture") |
| |
| |
| /* Trampolines. */ |
| #define TRAMPOLINE_SIZE 32 |
| #define TRAMPOLINE_ALIGNMENT 256 |
| |
| #define ELIMINABLE_REGS \ |
| {{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ |
| { ARG_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}, \ |
| { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}, \ |
| { FRAME_POINTER_REGNUM, HARD_FRAME_POINTER_REGNUM}} \ |
| |
| /* Define the offset between two registers, one to be eliminated, and the other |
| its replacement, at the start of a routine. */ |
| |
| #define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \ |
| ((OFFSET) = c6x_initial_elimination_offset ((FROM), (TO))) |
| |
| /* Addressing Modes. */ |
| |
| #define CONSTANT_ADDRESS_P(x) (CONSTANT_P(x) && GET_CODE(x) != CONST_DOUBLE) |
| #define MAX_REGS_PER_ADDRESS 2 |
| |
| #define HAVE_PRE_DECREMENT 1 |
| #define HAVE_POST_DECREMENT 1 |
| #define HAVE_PRE_INCREMENT 1 |
| #define HAVE_POST_INCREMENT 1 |
| |
| /* Register forms are available, but due to scaling we currently don't |
| support them. */ |
| #define HAVE_PRE_MODIFY_DISP 1 |
| #define HAVE_POST_MODIFY_DISP 1 |
| |
| #define LEGITIMATE_PIC_OPERAND_P(X) \ |
| (!symbolic_operand (X, SImode)) |
| |
| struct GTY(()) machine_function |
| { |
| /* True if we expanded a sibling call. */ |
| int contains_sibcall; |
| }; |
| |
| /* Costs. */ |
| #define NO_FUNCTION_CSE 1 |
| |
| #define SLOW_BYTE_ACCESS 0 |
| |
| #define BRANCH_COST(speed_p, predictable_p) 6 |
| |
| |
| /* Model costs for the vectorizer. */ |
| |
| /* Cost of conditional branch. */ |
| #ifndef TARG_COND_BRANCH_COST |
| #define TARG_COND_BRANCH_COST 6 |
| #endif |
| |
| /* Cost of any scalar operation, excluding load and store. */ |
| #ifndef TARG_SCALAR_STMT_COST |
| #define TARG_SCALAR_STMT_COST 1 |
| #endif |
| |
| /* Cost of scalar load. */ |
| #undef TARG_SCALAR_LOAD_COST |
| #define TARG_SCALAR_LOAD_COST 2 /* load + rotate */ |
| |
| /* Cost of scalar store. */ |
| #undef TARG_SCALAR_STORE_COST |
| #define TARG_SCALAR_STORE_COST 10 |
| |
| /* Cost of any vector operation, excluding load, store, |
| or vector to scalar operation. */ |
| #undef TARG_VEC_STMT_COST |
| #define TARG_VEC_STMT_COST 1 |
| |
| /* Cost of vector to scalar operation. */ |
| #undef TARG_VEC_TO_SCALAR_COST |
| #define TARG_VEC_TO_SCALAR_COST 1 |
| |
| /* Cost of scalar to vector operation. */ |
| #undef TARG_SCALAR_TO_VEC_COST |
| #define TARG_SCALAR_TO_VEC_COST 1 |
| |
| /* Cost of aligned vector load. */ |
| #undef TARG_VEC_LOAD_COST |
| #define TARG_VEC_LOAD_COST 1 |
| |
| /* Cost of misaligned vector load. */ |
| #undef TARG_VEC_UNALIGNED_LOAD_COST |
| #define TARG_VEC_UNALIGNED_LOAD_COST 2 |
| |
| /* Cost of vector store. */ |
| #undef TARG_VEC_STORE_COST |
| #define TARG_VEC_STORE_COST 1 |
| |
| /* Cost of vector permutation. */ |
| #ifndef TARG_VEC_PERMUTE_COST |
| #define TARG_VEC_PERMUTE_COST 1 |
| #endif |
| |
| /* ttype entries (the only interesting data references used) are |
| sb-relative got-indirect (aka .ehtype). */ |
| #define ASM_PREFERRED_EH_DATA_FORMAT(code, data) \ |
| (((code) == 0 && (data) == 1) ? (DW_EH_PE_datarel | DW_EH_PE_indirect) \ |
| : DW_EH_PE_absptr) |
| |
| /* This should be the same as the definition in elfos.h, plus the call |
| to output special unwinding directives. */ |
| #undef ASM_DECLARE_FUNCTION_NAME |
| #define ASM_DECLARE_FUNCTION_NAME(FILE, NAME, DECL) \ |
| do \ |
| { \ |
| c6x_output_file_unwind (FILE); \ |
| ASM_OUTPUT_TYPE_DIRECTIVE (FILE, NAME, "function"); \ |
| ASM_DECLARE_RESULT (FILE, DECL_RESULT (DECL)); \ |
| ASM_OUTPUT_LABEL (FILE, NAME); \ |
| } \ |
| while (0) |
| |
| /* This should be the same as the definition in elfos.h, plus the call |
| to output special unwinding directives. */ |
| #undef ASM_DECLARE_FUNCTION_SIZE |
| #define ASM_DECLARE_FUNCTION_SIZE(STREAM, NAME, DECL) \ |
| c6x_function_end (STREAM, NAME) |
| |
| /* Arbitrarily choose A4/A5. */ |
| #define EH_RETURN_DATA_REGNO(N) (((N) < 2) ? (N) + 4 : INVALID_REGNUM) |
| |
| /* The register that holds the return address in exception handlers. */ |
| #define C6X_EH_STACKADJ_REGNUM 3 |
| #define EH_RETURN_STACKADJ_RTX gen_rtx_REG (SImode, C6X_EH_STACKADJ_REGNUM) |
| |
| |
| /* Assembler Format. */ |
| |
| #define DWARF2_ASM_LINE_DEBUG_INFO 1 |
| |
| #undef ASM_APP_ON |
| #define ASM_APP_ON "\t; #APP \n" |
| #undef ASM_APP_OFF |
| #define ASM_APP_OFF "\t; #NO_APP \n" |
| |
| #define ASM_OUTPUT_COMMON(stream, name, size, rounded) |
| #define ASM_OUTPUT_LOCAL(stream, name, size, rounded) |
| |
| #define GLOBAL_ASM_OP "\t.global\t" |
| |
| #define REGISTER_NAMES \ |
| { \ |
| "A0", "A1", "A2", "A3", "A4", "A5", "A6", "A7", \ |
| "A8", "A9", "A10", "A11", "A12", "A13", "A14", "A15", \ |
| "A16", "A17", "A18", "A19", "A20", "A21", "A22", "A23", \ |
| "A24", "A25", "A26", "A27", "A28", "A29", "A30", "A31", \ |
| "B0", "B1", "B2", "B3", "B4", "B5", "B6", "B7", \ |
| "B8", "B9", "B10", "B11", "B12", "B13", "B14", "B15", \ |
| "B16", "B17", "B18", "B19", "B20", "B21", "B22", "B23", \ |
| "B24", "B25", "B26", "B27", "B28", "B29", "B30", "B31", \ |
| "FP", "ARGP", "ILC" } |
| |
| #define DBX_REGISTER_NUMBER(N) (dbx_register_map[(N)]) |
| |
| extern unsigned const dbx_register_map[FIRST_PSEUDO_REGISTER]; |
| |
| #define FINAL_PRESCAN_INSN c6x_final_prescan_insn |
| |
| #define TEXT_SECTION_ASM_OP ".text;" |
| #define DATA_SECTION_ASM_OP ".data;" |
| |
| #define ASM_OUTPUT_ALIGN(stream, power) \ |
| do \ |
| { \ |
| if (power) \ |
| fprintf ((stream), "\t.align\t%d\n", power); \ |
| } \ |
| while (0) |
| |
| #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ |
| do { char __buf[256]; \ |
| fprintf (FILE, "\t.long\t"); \ |
| ASM_GENERATE_INTERNAL_LABEL (__buf, "L", VALUE); \ |
| assemble_name (FILE, __buf); \ |
| fputc ('\n', FILE); \ |
| } while (0) |
| |
| /* Determine whether to place EXP (an expression or a decl) should be |
| placed into one of the small data sections. */ |
| #define PLACE_IN_SDATA_P(EXP) \ |
| (c6x_sdata_mode == C6X_SDATA_NONE ? false \ |
| : c6x_sdata_mode == C6X_SDATA_ALL ? true \ |
| : !AGGREGATE_TYPE_P (TREE_TYPE (EXP))) |
| |
| #define SCOMMON_ASM_OP "\t.scomm\t" |
| |
| #undef ASM_OUTPUT_ALIGNED_DECL_COMMON |
| #define ASM_OUTPUT_ALIGNED_DECL_COMMON(FILE, DECL, NAME, SIZE, ALIGN) \ |
| do \ |
| { \ |
| if (DECL != NULL && PLACE_IN_SDATA_P (DECL)) \ |
| fprintf ((FILE), "%s", SCOMMON_ASM_OP); \ |
| else \ |
| fprintf ((FILE), "%s", COMMON_ASM_OP); \ |
| assemble_name ((FILE), (NAME)); \ |
| fprintf ((FILE), ",%u,%u\n", (int)(SIZE), (ALIGN) / BITS_PER_UNIT);\ |
| } \ |
| while (0) |
| |
| /* This says how to output assembler code to declare an |
| uninitialized internal linkage data object. */ |
| |
| #undef ASM_OUTPUT_ALIGNED_DECL_LOCAL |
| #define ASM_OUTPUT_ALIGNED_DECL_LOCAL(FILE, DECL, NAME, SIZE, ALIGN) \ |
| do { \ |
| if (PLACE_IN_SDATA_P (DECL)) \ |
| switch_to_section (sbss_section); \ |
| else \ |
| switch_to_section (bss_section); \ |
| ASM_OUTPUT_TYPE_DIRECTIVE (FILE, NAME, "object"); \ |
| if (!flag_inhibit_size_directive) \ |
| ASM_OUTPUT_SIZE_DIRECTIVE (FILE, NAME, SIZE); \ |
| ASM_OUTPUT_ALIGN ((FILE), exact_log2((ALIGN) / BITS_PER_UNIT)); \ |
| ASM_OUTPUT_LABEL(FILE, NAME); \ |
| ASM_OUTPUT_SKIP((FILE), (SIZE) ? (SIZE) : 1); \ |
| } while (0) |
| |
| #define CASE_VECTOR_PC_RELATIVE flag_pic |
| #define JUMP_TABLES_IN_TEXT_SECTION flag_pic |
| |
| #define ADDR_VEC_ALIGN(VEC) (JUMP_TABLES_IN_TEXT_SECTION ? 5 : 2) |
| |
| /* This is how to output an element of a case-vector that is relative. */ |
| #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \ |
| do { char buf[100]; \ |
| fputs ("\t.long ", FILE); \ |
| ASM_GENERATE_INTERNAL_LABEL (buf, "L", VALUE); \ |
| assemble_name (FILE, buf); \ |
| putc ('-', FILE); \ |
| ASM_GENERATE_INTERNAL_LABEL (buf, "L", REL); \ |
| assemble_name (FILE, buf); \ |
| putc ('\n', FILE); \ |
| } while (0) |
| |
| /* Misc. */ |
| |
| #define CASE_VECTOR_MODE SImode |
| #define MOVE_MAX 4 |
| #define MOVE_RATIO(SPEED) 4 |
| #define TRULY_NOOP_TRUNCATION(outprec, inprec) 1 |
| #define CLZ_DEFINED_VALUE_AT_ZERO(MODE, VALUE) ((VALUE) = 32, 1) |
| #define Pmode SImode |
| #define FUNCTION_MODE QImode |
| |
| #define CPU_UNITS_QUERY 1 |
| |
| extern int c6x_initial_flag_pic; |
| |
| #endif /* GCC_C6X_H */ |