;; Constraint definitions for IA-32 and x86-64. ;; Copyright (C) 2006-2015 Free Software Foundation, Inc. ;; ;; This file is part of GCC. ;; ;; GCC is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 3, or (at your option) ;; any later version. ;; ;; GCC is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; ;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; http://www.gnu.org/licenses/.

;;; Unused letters: ;;; H ;;; h j z

;; Integer register constraints. ;; It is not necessary to define ‘r’ here. (define_register_constraint “R” “LEGACY_REGS” “Legacy register---the eight integer registers available on all i386 processors (@code{a}, @code{b}, @code{c}, @code{d}, @code{si}, @code{di}, @code{bp}, @code{sp}).”)

(define_register_constraint “q” “TARGET_64BIT ? GENERAL_REGS : Q_REGS” “Any register accessible as @code{@var{r}l}. In 32-bit mode, @code{a}, @code{b}, @code{c}, and @code{d}; in 64-bit mode, any integer register.”)

(define_register_constraint “Q” “Q_REGS” “Any register accessible as @code{@var{r}h}: @code{a}, @code{b}, @code{c}, and @code{d}.”)

(define_register_constraint “l” “INDEX_REGS” “@internal Any register that can be used as the index in a base+index memory access: that is, any general register except the stack pointer.”)

(define_register_constraint “a” “AREG” “The @code{a} register.”)

(define_register_constraint “b” “BREG” “The @code{b} register.”)

(define_register_constraint “c” “CREG” “The @code{c} register.”)

(define_register_constraint “d” “DREG” “The @code{d} register.”)

(define_register_constraint “S” “SIREG” “The @code{si} register.”)

(define_register_constraint “D” “DIREG” “The @code{di} register.”)

(define_register_constraint “A” “AD_REGS” “The @code{a} and @code{d} registers, as a pair (for instructions that return half the result in one and half in the other).”)

(define_register_constraint “U” “CLOBBERED_REGS” “The call-clobbered integer registers.”)

;; Floating-point register constraints. (define_register_constraint “f” “TARGET_80387 || TARGET_FLOAT_RETURNS_IN_80387 ? FLOAT_REGS : NO_REGS” “Any 80387 floating-point (stack) register.”)

(define_register_constraint “t” “TARGET_80387 || TARGET_FLOAT_RETURNS_IN_80387 ? FP_TOP_REG : NO_REGS” “Top of 80387 floating-point stack (@code{%st(0)}).”)

(define_register_constraint “u” “TARGET_80387 || TARGET_FLOAT_RETURNS_IN_80387 ? FP_SECOND_REG : NO_REGS” “Second from top of 80387 floating-point stack (@code{%st(1)}).”)

(define_register_constraint “Yk” “TARGET_AVX512F ? MASK_EVEX_REGS : NO_REGS” “@internal Any mask register that can be used as predicate, i.e. k1-k7.”)

(define_register_constraint “k” “TARGET_AVX512F ? MASK_REGS : NO_REGS” “@internal Any mask register.”)

;; Vector registers (also used for plain floating point nowadays). (define_register_constraint “y” “TARGET_MMX ? MMX_REGS : NO_REGS” “Any MMX register.”)

(define_register_constraint “x” “TARGET_SSE ? SSE_REGS : NO_REGS” “Any SSE register.”)

(define_register_constraint “v” “TARGET_SSE ? ALL_SSE_REGS : NO_REGS” “Any EVEX encodable SSE register (@code{%xmm0-%xmm31}).”)

(define_register_constraint “w” “TARGET_MPX ? BND_REGS : NO_REGS” “@internal Any bound register.”)

;; We use the Y prefix to denote any number of conditional register sets: ;; z First SSE register. ;; i SSE2 inter-unit moves to SSE register enabled ;; j SSE2 inter-unit moves from SSE register enabled ;; m MMX inter-unit moves to MMX register enabled ;; n MMX inter-unit moves from MMX register enabled ;; a Integer register when zero extensions with AND are disabled ;; p Integer register when TARGET_PARTIAL_REG_STALL is disabled ;; f x87 register when 80387 floating point arithmetic is enabled ;; r SSE regs not requiring REX prefix when prefixes avoidance is enabled ;; and all SSE regs otherwise

(define_register_constraint “Yz” “TARGET_SSE ? SSE_FIRST_REG : NO_REGS” “First SSE register (@code{%xmm0}).”)

(define_register_constraint “Yi” “TARGET_SSE2 && TARGET_INTER_UNIT_MOVES_TO_VEC ? ALL_SSE_REGS : NO_REGS” “@internal Any SSE register, when SSE2 and inter-unit moves to vector registers are enabled.”)

(define_register_constraint “Yj” “TARGET_SSE2 && TARGET_INTER_UNIT_MOVES_FROM_VEC ? ALL_SSE_REGS : NO_REGS” “@internal Any SSE register, when SSE2 and inter-unit moves from vector registers are enabled.”)

(define_register_constraint “Ym” “TARGET_MMX && TARGET_INTER_UNIT_MOVES_TO_VEC ? MMX_REGS : NO_REGS” “@internal Any MMX register, when inter-unit moves to vector registers are enabled.”)

(define_register_constraint “Yn” “TARGET_MMX && TARGET_INTER_UNIT_MOVES_FROM_VEC ? MMX_REGS : NO_REGS” “@internal Any MMX register, when inter-unit moves from vector registers are enabled.”)

(define_register_constraint “Yp” “TARGET_PARTIAL_REG_STALL ? NO_REGS : GENERAL_REGS” “@internal Any integer register when TARGET_PARTIAL_REG_STALL is disabled.”)

(define_register_constraint “Ya” “TARGET_ZERO_EXTEND_WITH_AND && optimize_function_for_speed_p (cfun) ? NO_REGS : GENERAL_REGS” “@internal Any integer register when zero extensions with AND are disabled.”)

(define_register_constraint “Yf” “(ix86_fpmath & FPMATH_387) ? FLOAT_REGS : NO_REGS” “@internal Any x87 register when 80387 FP arithmetic is enabled.”)

;; Yr constraint is meant to be used in noavx contexts only, for VEX and EVEX ;; the lower register numbers need the same instruction sizes as any other. ;; In case Yr constraint is misused, try to limit the damage, by treating ;; it as x constraint in avx mode, not v constraint. (define_register_constraint “Yr” “TARGET_SSE ? ((TARGET_AVOID_4BYTE_PREFIXES && !TARGET_AVX) ? NO_REX_SSE_REGS : SSE_REGS) : NO_REGS” “@internal Lower SSE register when avoiding REX prefix and all SSE registers otherwise.”)

;; We use the B prefix to denote any number of internal operands: ;; s Sibcall memory operand, not valid for TARGET_X32 ;; w Call memory operand, not valid for TARGET_X32 ;; z Constant call address operand. ;; C SSE constant operand.

(define_constraint “Bs” “@internal Sibcall memory operand.” (and (not (match_test “TARGET_X32”)) (match_operand 0 “sibcall_memory_operand”)))

(define_constraint “Bw” “@internal Call memory operand.” (and (not (match_test “TARGET_X32”)) (match_operand 0 “memory_operand”)))

(define_constraint “Bz” “@internal Constant call address operand.” (match_operand 0 “constant_call_address_operand”))

(define_constraint “BC” “@internal SSE constant operand.” (match_test “standard_sse_constant_p (op)”))

;; Integer constant constraints. (define_constraint “I” “Integer constant in the range 0 @dots{} 31, for 32-bit shifts.” (and (match_code “const_int”) (match_test “IN_RANGE (ival, 0, 31)”)))

(define_constraint “J” “Integer constant in the range 0 @dots{} 63, for 64-bit shifts.” (and (match_code “const_int”) (match_test “IN_RANGE (ival, 0, 63)”)))

(define_constraint “K” “Signed 8-bit integer constant.” (and (match_code “const_int”) (match_test “IN_RANGE (ival, -128, 127)”)))

(define_constraint “L” “@code{0xFF}, @code{0xFFFF} or @code{0xFFFFFFFF} for AND as a zero-extending move.” (and (match_code “const_int”) (match_test “ival == 0xff || ival == 0xffff || ival == (HOST_WIDE_INT) 0xffffffff”)))

(define_constraint “M” “0, 1, 2, or 3 (shifts for the @code{lea} instruction).” (and (match_code “const_int”) (match_test “IN_RANGE (ival, 0, 3)”)))

(define_constraint “N” “Unsigned 8-bit integer constant (for @code{in} and @code{out} instructions).” (and (match_code “const_int”) (match_test “IN_RANGE (ival, 0, 255)”)))

(define_constraint “O” “@internal Integer constant in the range 0 @dots{} 127, for 128-bit shifts.” (and (match_code “const_int”) (match_test “IN_RANGE (ival, 0, 127)”)))

;; Floating-point constant constraints. ;; We allow constants even if TARGET_80387 isn't set, because the ;; stack register converter may need to load 0.0 into the function ;; value register (top of stack). (define_constraint “G” “Standard 80387 floating point constant.” (and (match_code “const_double”) (match_test “standard_80387_constant_p (op) > 0”)))

;; This can theoretically be any mode's CONST0_RTX. (define_constraint “C” “SSE constant zero operand.” (match_test “standard_sse_constant_p (op) == 1”))

;; Constant-or-symbol-reference constraints.

(define_constraint “e” “32-bit signed integer constant, or a symbolic reference known to fit that range (for immediate operands in sign-extending x86-64 instructions).” (match_operand 0 “x86_64_immediate_operand”))

;; We use W prefix to denote any number of ;; constant-or-symbol-reference constraints

(define_constraint “We” “32-bit signed integer constant, or a symbolic reference known to fit that range (for sign-extending conversion operations that require non-VOIDmode immediate operands).” (and (match_operand 0 “x86_64_immediate_operand”) (match_test “GET_MODE (op) != VOIDmode”)))

(define_constraint “Wz” “32-bit unsigned integer constant, or a symbolic reference known to fit that range (for zero-extending conversion operations that require non-VOIDmode immediate operands).” (and (match_operand 0 “x86_64_zext_immediate_operand”) (match_test “GET_MODE (op) != VOIDmode”)))

(define_constraint “Z” “32-bit unsigned integer constant, or a symbolic reference known to fit that range (for immediate operands in zero-extending x86-64 instructions).” (match_operand 0 “x86_64_zext_immediate_operand”))

;; T prefix is used for different address constraints ;; v - VSIB address ;; s - address with no segment register ;; i - address with no index and no rip ;; b - address with no base and no rip

(define_address_constraint “Tv” “VSIB address operand” (match_operand 0 “vsib_address_operand”))

(define_address_constraint “Ts” “Address operand without segment register” (match_operand 0 “address_no_seg_operand”))

(define_address_constraint “Ti” “MPX address operand without index” (match_operand 0 “address_mpx_no_index_operand”))

(define_address_constraint “Tb” “MPX address operand without base” (match_operand 0 “address_mpx_no_base_operand”))