;; Machine Descriptions for R8C/M16C/M32C ;; Copyright (C) 2006-2015 Free Software Foundation, Inc. ;; Contributed by Red Hat. ;; ;; This file is part of GCC. ;; ;; GCC is free software; you can redistribute it and/or modify it ;; under the terms of the GNU General Public License as published ;; by the Free Software Foundation; either version 3, or (at your ;; option) any later version. ;; ;; GCC is distributed in the hope that it will be useful, but WITHOUT ;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ;; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public ;; License for more details. ;; ;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; http://www.gnu.org/licenses/.
;; various block move instructions
;; R8C: ;; SMOVB - while (r3--) { *a1-- = *r1ha0--; } - memcpy ;; SMOVF - while (r3--) { *a1++ = *r1ha0++; } - memcpy ;; SSTR - while (r3--) { *a1++ = [r0l,r0]; } - memset
;; M32CM: ;; SCMPU - while (*a0 && *a0 != *a1) { a0++; a1++; } - strcmp ;; SIN - while (r3--) { *a1++ = *a0; } ;; SMOVB - while (r3--) { *a1-- = *a0--; } - memcpy ;; SMOVF - while (r3--) { *a1++ = *a0++; } - memcpy ;; SMOVU - while (*a1++ = *a0++) ; - strcpy ;; SOUT - while (r3--) { *a1 = *a0++; } ;; SSTR - while (r3--) { *a1++ = [r0l,r0]; } - memset
;; 0 = destination (mem:BLK ...) ;; 1 = source (mem:BLK ...) ;; 2 = count ;; 3 = alignment (define_expand “movmemhi” [(match_operand 0 “ap_operand” "") (match_operand 1 “ap_operand” "") (match_operand 2 “m32c_r3_operand” "") (match_operand 3 "" "") ] "" “if (m32c_expand_movmemhi(operands)) DONE; FAIL;” )
;; We can‘t use mode iterators for these because M16C uses r1h to extend ;; the source address, for copying data from ROM to RAM. We don’t yet ;; support that, but we need to zero our r1h, so the patterns differ.
;; 0 = dest (out) ;; 1 = src (out) ;; 2 = count (out) ;; 3 = dest (in) ;; 4 = src (in) ;; 5 = count (in) (define_insn “movmemhi_bhi_op” [(set (mem:QI (match_operand:HI 3 “ap_operand” “0”)) (mem:QI (match_operand:HI 4 “ap_operand” “1”))) (set (match_operand:HI 2 “m32c_r3_operand” “=R3w”) (const_int 0)) (set (match_operand:HI 0 “ap_operand” “=Ra1”) (plus:HI (match_dup 3) (zero_extend:HI (match_operand:HI 5 “m32c_r3_operand” “2”)))) (set (match_operand:HI 1 “ap_operand” “=Ra0”) (plus:HI (match_dup 4) (zero_extend:HI (match_dup 5)))) (use (reg:HI R1_REGNO))] “TARGET_A16” “mov.b:q\t#0,r1h\n\tsmovf.b\t; %0[0..%2-1]=r1h%1[]” ) (define_insn “movmemhi_bpsi_op” [(set (mem:QI (match_operand:PSI 3 “ap_operand” “0”)) (mem:QI (match_operand:PSI 4 “ap_operand” “1”))) (set (match_operand:HI 2 “m32c_r3_operand” “=R3w”) (const_int 0)) (set (match_operand:PSI 0 “ap_operand” “=Ra1”) (plus:PSI (match_dup 3) (zero_extend:PSI (match_operand:HI 5 “m32c_r3_operand” “2”)))) (set (match_operand:PSI 1 “ap_operand” “=Ra0”) (plus:PSI (match_dup 4) (zero_extend:PSI (match_dup 5))))] “TARGET_A24” “smovf.b\t; %0[0..%2-1]=%1[]” ) (define_insn “movmemhi_whi_op” [(set (mem:HI (match_operand:HI 3 “ap_operand” “0”)) (mem:HI (match_operand:HI 4 “ap_operand” “1”))) (set (match_operand:HI 2 “m32c_r3_operand” “=R3w”) (const_int 0)) (set (match_operand:HI 0 “ap_operand” “=Ra1”) (plus:HI (match_dup 3) (zero_extend:HI (match_operand:HI 5 “m32c_r3_operand” “2”)))) (set (match_operand:HI 1 “ap_operand” “=Ra0”) (plus:HI (match_dup 4) (zero_extend:HI (match_dup 5)))) (use (reg:HI R1_REGNO))] “TARGET_A16” “mov.b:q\t#0,r1h\n\tsmovf.w\t; %0[0..%2-1]=r1h%1[]” ) (define_insn “movmemhi_wpsi_op” [(set (mem:HI (match_operand:PSI 3 “ap_operand” “0”)) (mem:HI (match_operand:PSI 4 “ap_operand” “1”))) (set (match_operand:HI 2 “m32c_r3_operand” “=R3w”) (const_int 0)) (set (match_operand:PSI 0 “ap_operand” “=Ra1”) (plus:PSI (match_dup 3) (zero_extend:PSI (match_operand:HI 5 “m32c_r3_operand” “2”)))) (set (match_operand:PSI 1 “ap_operand” “=Ra0”) (plus:PSI (match_dup 4) (zero_extend:PSI (match_dup 5))))] “TARGET_A24” “smovf.w\t; %0[0..%2-1]=%1[]” )
;; 0 = destination (mem:BLK ...) ;; 1 = number of bytes ;; 2 = value to store ;; 3 = alignment (define_expand “setmemhi” [(match_operand 0 “ap_operand” "") (match_operand 1 “m32c_r3_operand” "") (match_operand 2 “m32c_r0_operand” "") (match_operand 3 "" "") ] “TARGET_A24” “if (m32c_expand_setmemhi(operands)) DONE; FAIL;” )
;; 0 = address (out) ;; 1 = count (out) ;; 2 = value (in) ;; 3 = address (in) ;; 4 = count (in) (define_insn “setmemhi_b_op” [(set (mem:QI (match_operand:HPSI 3 “ap_operand” “0”)) (match_operand:QI 2 “m32c_r0_operand” “R0w”)) (set (match_operand:HI 1 “m32c_r3_operand” “=R3w”) (const_int 0)) (set (match_operand:HPSI 0 “ap_operand” “=Ra1”) (plus:HPSI (match_dup 3) (zero_extend:HPSI (match_operand:HI 4 “m32c_r3_operand” “1”))))] “TARGET_A24” “sstr.b\t; %0[0..%1-1]=%2” )
(define_insn “setmemhi_w_op” [(set (mem:HI (match_operand:HPSI 3 “ap_operand” “0”)) (match_operand:HI 2 “m32c_r0_operand” “R0w”)) (set (match_operand:HI 1 “m32c_r3_operand” “=R3w”) (const_int 0)) (set (match_operand:HPSI 0 “ap_operand” “=Ra1”) (plus:HPSI (match_dup 3) (zero_extend:HPSI (match_operand:HI 4 “m32c_r3_operand” “1”))))] “TARGET_A24” “sstr.w\t; %0[0..%1-1]=%2” )
;; SCMPU sets the flags according to the result of the string ;; comparison. GCC wants the result to be a signed value reflecting ;; the result, which it then compares to zero. Hopefully we can ;; optimize that later (see peephole in cond.md). Meanwhile, the ;; strcmp builtin is expanded to a SCMPU followed by a flags-to-int ;; pattern in cond.md.
;; 0 = result:HI ;; 1 = destination (mem:BLK ...) ;; 2 = source (mem:BLK ...) ;; 3 = alignment
(define_expand “cmpstrsi” [(match_operand:HI 0 "" "") (match_operand 1 “ap_operand” "") (match_operand 2 “ap_operand” "") (match_operand 3 "" "") ] “TARGET_A24” “if (m32c_expand_cmpstr(operands)) DONE; FAIL;” )
;; 0 = string1 ;; 1 = string2
(define_insn “cmpstrhi_op” [(set (reg:CC FLG_REGNO) (compare:CC (mem:BLK (match_operand:PSI 0 “ap_operand” “Ra0”)) (mem:BLK (match_operand:PSI 1 “ap_operand” “Ra1”)))) (clobber (match_operand:PSI 2 “ap_operand” “=0”)) (clobber (match_operand:PSI 3 “ap_operand” “=1”))] “TARGET_A24” “scmpu.b\t; flags := strcmp(%0,%1)” [(set_attr “flags” “oszc”)] )
;; Note that SMOVU leaves the address registers pointing after ;; the NUL at the end of the string. This is not what gcc expects; it ;; expects the address registers to point at the NUL. The expander ;; must emit a suitable add insn.
;; 0 = target: set to &NUL in dest ;; 1 = destination (mem:BLK ...) ;; 2 = source (mem:BLK ...)
(define_expand “movstr” [(match_operand 0 “m32c_nonimmediate_operand” "") (match_operand 1 "" "") (match_operand 2 "" "") ] “TARGET_A24” “if (m32c_expand_movstr(operands)) DONE; FAIL;” )
;; 0 = dest (out) ;; 1 = src (out) (clobbered) ;; 2 = dest (in) ;; 3 = src (in) (define_insn “movstr_op” [(set (mem:BLK (match_operand:PSI 2 “ap_operand” “0”)) (mem:BLK (match_operand:PSI 3 “ap_operand” “1”))) (set (match_operand:PSI 0 “ap_operand” “=Ra1”) (plus:PSI (match_dup 2) (unspec:PSI [(const_int 0)] UNS_SMOVU))) (set (match_operand:PSI 1 “ap_operand” “=Ra0”) (plus:PSI (match_dup 3) (unspec:PSI [(const_int 0)] UNS_SMOVU)))] “TARGET_A24” “smovu.b\t; while (*%2++ := *%3++) != 0” [(set_attr “flags” “*”)] )