;; Predicate definitions for Motorola MCore. ;; Copyright (C) 2005-2015 Free Software Foundation, Inc. ;; ;; This file is part of GCC. ;; ;; GCC is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 3, or (at your option) ;; any later version. ;; ;; GCC is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; ;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; http://www.gnu.org/licenses/.

;; Nonzero if OP is a normal arithmetic register.

(define_predicate “mcore_arith_reg_operand” (match_code “reg,subreg”) { if (! register_operand (op, mode)) return 0;

if (GET_CODE (op) == SUBREG) op = SUBREG_REG (op);

if (GET_CODE (op) == REG) return REGNO (op) != CC_REG;

return 1; })

;; Nonzero if OP can be source of a simple move operation.

(define_predicate “mcore_general_movsrc_operand” (match_code “mem,const_int,reg,subreg,symbol_ref,label_ref,const”) { /* Any (MEM LABEL_REF) is OK. That is a pc-relative load. */ if (GET_CODE (op) == MEM && GET_CODE (XEXP (op, 0)) == LABEL_REF) return 1;

return general_operand (op, mode); })

;; Nonzero if OP can be destination of a simple move operation.

(define_predicate “mcore_general_movdst_operand” (match_code “mem,reg,subreg”) { if (GET_CODE (op) == REG && REGNO (op) == CC_REG) return 0;

return general_operand (op, mode); })

;; Nonzero if OP should be recognized during reload for an ixh/ixw ;; operand. See the ixh/ixw patterns.

(define_predicate “mcore_reload_operand” (match_code “mem,reg,subreg”) { if (mcore_arith_reg_operand (op, mode)) return 1;

if (! reload_in_progress) return 0;

return GET_CODE (op) == MEM; })

;; Nonzero if OP is a valid source operand for an arithmetic insn.

(define_predicate “mcore_arith_J_operand” (match_code “const_int,reg,subreg”) { if (register_operand (op, mode)) return 1;

if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_J (INTVAL (op))) return 1;

return 0; })

;; Nonzero if OP is a valid source operand for an arithmetic insn.

(define_predicate “mcore_arith_K_operand” (match_code “const_int,reg,subreg”) { if (register_operand (op, mode)) return 1;

if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_K (INTVAL (op))) return 1;

return 0; })

;; Nonzero if OP is a valid source operand for a shift or rotate insn.

(define_predicate “mcore_arith_K_operand_not_0” (match_code “const_int,reg,subreg”) { if (register_operand (op, mode)) return 1;

if ( GET_CODE (op) == CONST_INT && CONST_OK_FOR_K (INTVAL (op)) && INTVAL (op) != 0) return 1;

return 0; })

;; TODO: Add a comment here.

(define_predicate “mcore_arith_M_operand” (match_code “const_int,reg,subreg”) { if (register_operand (op, mode)) return 1;

if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_M (INTVAL (op))) return 1;

return 0; })

;; TODO: Add a comment here.

(define_predicate “mcore_arith_K_S_operand” (match_code “const_int,reg,subreg”) { if (register_operand (op, mode)) return 1;

if (GET_CODE (op) == CONST_INT) { if (CONST_OK_FOR_K (INTVAL (op)) || (mcore_num_zeros (INTVAL (op)) <= 2)) return 1; }

return 0; })

;; Nonzero if OP is a valid source operand for a cmov with two consts ;; +/- 1.

(define_predicate “mcore_arith_O_operand” (match_code “const_int,reg,subreg”) { if (register_operand (op, mode)) return 1;

if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_O (INTVAL (op))) return 1;

return 0; })

;; Nonzero if OP is a valid source operand for loading.

(define_predicate “mcore_arith_imm_operand” (match_code “const_int,reg,subreg”) { if (register_operand (op, mode)) return 1;

if (GET_CODE (op) == CONST_INT && const_ok_for_mcore (INTVAL (op))) return 1;

return 0; })

;; TODO: Add a comment here.

(define_predicate “mcore_arith_any_imm_operand” (match_code “const_int,reg,subreg”) { if (register_operand (op, mode)) return 1;

if (GET_CODE (op) == CONST_INT) return 1;

return 0; })

;; Nonzero if OP is a valid source operand for a btsti.

(define_predicate “mcore_literal_K_operand” (match_code “const_int”) { if (GET_CODE (op) == CONST_INT && CONST_OK_FOR_K (INTVAL (op))) return 1;

return 0; })

;; Nonzero if OP is a valid source operand for an add/sub insn.

(define_predicate “mcore_addsub_operand” (match_code “const_int,reg,subreg”) { if (register_operand (op, mode)) return 1;

if (GET_CODE (op) == CONST_INT) { /* The following has been removed because it precludes large constants from being returned as valid source operands for and add/sub insn. While large constants may not directly be used in an add/sub, they may if first loaded into a register. Thus, this predicate should indicate that they are valid, and the constraint in mcore.md should control whether an additional load to register is needed. (see mcore.md, addsi). -- DAC 4/2/1998

  if (CONST_OK_FOR_J (INTVAL (op)) || CONST_OK_FOR_L (INTVAL (op)))
    return 1;

 However we do still need to check to make sure that the constant is not too
 big, especially if we are running on a 64-bit OS...  Nickc 8/1/07.  */

  if (trunc_int_for_mode (INTVAL (op), mode) != INTVAL (op))
return 0;

  return 1;

}

return 0; })

;; Nonzero if OP is a valid source operand for a compare operation.

(define_predicate “mcore_compare_operand” (match_code “const_int,reg,subreg”) { if (register_operand (op, mode)) return 1;

if (GET_CODE (op) == CONST_INT && INTVAL (op) == 0) return 1;

return 0; })

;; Return 1 if OP is a load multiple operation. It is known to be a ;; PARALLEL and the first section will be tested.

(define_predicate “mcore_load_multiple_operation” (match_code “parallel”) { int count = XVECLEN (op, 0); int dest_regno; rtx src_addr; int i;

/* Perform a quick check so we don't blow up below. */ if (count <= 1 || GET_CODE (XVECEXP (op, 0, 0)) != SET || GET_CODE (SET_DEST (XVECEXP (op, 0, 0))) != REG || GET_CODE (SET_SRC (XVECEXP (op, 0, 0))) != MEM) return 0;

dest_regno = REGNO (SET_DEST (XVECEXP (op, 0, 0))); src_addr = XEXP (SET_SRC (XVECEXP (op, 0, 0)), 0);

for (i = 1; i < count; i++) { rtx elt = XVECEXP (op, 0, i);

  if (GET_CODE (elt) != SET
  || GET_CODE (SET_DEST (elt)) != REG
  || GET_MODE (SET_DEST (elt)) != SImode
  || REGNO (SET_DEST (elt))    != (unsigned) (dest_regno + i)
  || GET_CODE (SET_SRC (elt))  != MEM
  || GET_MODE (SET_SRC (elt))  != SImode
  || GET_CODE (XEXP (SET_SRC (elt), 0)) != PLUS
  || ! rtx_equal_p (XEXP (XEXP (SET_SRC (elt), 0), 0), src_addr)
  || GET_CODE (XEXP (XEXP (SET_SRC (elt), 0), 1)) != CONST_INT
  || INTVAL (XEXP (XEXP (SET_SRC (elt), 0), 1)) != i * 4)
return 0;
}

return 1; })

;; Similar, but tests for store multiple.

(define_predicate “mcore_store_multiple_operation” (match_code “parallel”) { int count = XVECLEN (op, 0); int src_regno; rtx dest_addr; int i;

/* Perform a quick check so we don't blow up below. */ if (count <= 1 || GET_CODE (XVECEXP (op, 0, 0)) != SET || GET_CODE (SET_DEST (XVECEXP (op, 0, 0))) != MEM || GET_CODE (SET_SRC (XVECEXP (op, 0, 0))) != REG) return 0;

src_regno = REGNO (SET_SRC (XVECEXP (op, 0, 0))); dest_addr = XEXP (SET_DEST (XVECEXP (op, 0, 0)), 0);

for (i = 1; i < count; i++) { rtx elt = XVECEXP (op, 0, i);

  if (GET_CODE (elt) != SET
  || GET_CODE (SET_SRC (elt)) != REG
  || GET_MODE (SET_SRC (elt)) != SImode
  || REGNO (SET_SRC (elt)) != (unsigned) (src_regno + i)
  || GET_CODE (SET_DEST (elt)) != MEM
  || GET_MODE (SET_DEST (elt)) != SImode
  || GET_CODE (XEXP (SET_DEST (elt), 0)) != PLUS
  || ! rtx_equal_p (XEXP (XEXP (SET_DEST (elt), 0), 0), dest_addr)
  || GET_CODE (XEXP (XEXP (SET_DEST (elt), 0), 1)) != CONST_INT
  || INTVAL (XEXP (XEXP (SET_DEST (elt), 0), 1)) != i * 4)
return 0;
}

return 1; })

;; TODO: Add a comment here.

(define_predicate “mcore_call_address_operand” (match_code “reg,subreg,const_int,symbol_ref”) { return register_operand (op, mode) || CONSTANT_P (op); })