;; GCC machine description for Matsushita MN10300 ;; Copyright (C) 1996-2015 Free Software Foundation, Inc. ;; Contributed by Jeff Law (law@cygnus.com).

;; This file is part of GCC.

;; GCC is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 3, or (at your option) ;; any later version.

;; GCC is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; http://www.gnu.org/licenses/.

;; The original PO technology requires these to be ordered by speed, ;; so that assigner will pick the fastest.

;; See file “rtl.def” for documentation on define_insn, match_*, et. al.

(define_constants [ (PIC_REG 6) (SP_REG 9) (MDR_REG 50) (CC_REG 51)

(UNSPEC_PIC 1) (UNSPEC_GOT 2) (UNSPEC_GOTOFF 3) (UNSPEC_PLT 4) (UNSPEC_GOTSYM_OFF 5)

(UNSPEC_EXT 6) (UNSPEC_BSCH 7)

;; This is used to encode LIW patterns. (UNSPEC_LIW 8) ;; This is for the low overhead loop instructions. (UNSPEC_SETLB 9) ])

(include “predicates.md”) (include “constraints.md”)

;; Processor type. This attribute must exactly match the processor_type ;; enumeration in mn10300.h. (define_attr “cpu” “mn10300,am33,am33_2,am34” (const (symbol_ref “(enum attr_cpu) mn10300_tune_cpu”)))

;; Used to control the “enabled” attribute on a per-instruction basis. (define_attr “isa” “base,am33,am33_2,am34” (const_string “base”))

(define_attr “enabled” "" (cond [(eq_attr “isa” “base”) (const_int 1)

     (and (eq_attr "isa" "am33")
      (match_test "TARGET_AM33"))
     (const_int 1)

     (and (eq_attr "isa" "am33_2")
      (match_test "TARGET_AM33_2"))
     (const_int 1)
    
     (and (eq_attr "isa" "am34")
      (match_test "TARGET_AM34"))
     (const_int 1)
]
(const_int 0))

)

(define_mode_iterator INT [QI HI SI])

;; Bundling of smaller insns into a long instruction word (LIW) (define_automaton “liw_bundling”) (automata_option “ndfa”)

(define_cpu_unit “liw_op1_u,liw_op2_u” “liw_bundling”)

(define_attr “liw” “op1,op2,both,either” (const_string “both”)) ;; Note: this list must match the one defined for liw_op_names[]. (define_attr “liw_op” “add,cmp,sub,mov,and,or,xor,asr,lsr,asl,none,max” (const_string “none”))

(define_insn_reservation “liw_op1” 1 (and (ior (eq_attr “cpu” “am33”) (eq_attr “cpu” “am33_2”) (eq_attr “cpu” “am34”)) (eq_attr “liw” “op1”)) “liw_op1_u”); (define_insn_reservation “liw_op2” 1 (and (ior (eq_attr “cpu” “am33”) (eq_attr “cpu” “am33_2”) (eq_attr “cpu” “am34”)) (eq_attr “liw” “op2”)) “liw_op2_u”); (define_insn_reservation “liw_both” 1 (and (ior (eq_attr “cpu” “am33”) (eq_attr “cpu” “am33_2”) (eq_attr “cpu” “am34”)) (eq_attr “liw” “both”)) “liw_op1_u + liw_op2_u”); (define_insn_reservation “liw_either” 1 (and (ior (eq_attr “cpu” “am33”) (eq_attr “cpu” “am33_2”) (eq_attr “cpu” “am34”)) (eq_attr “liw” “either”)) “liw_op1_u | liw_op2_u”); ;; ---------------------------------------------------------------------- ;; Pipeline description. ;; ----------------------------------------------------------------------

;; The AM33 only has a single pipeline. It has five stages (fetch, ;; decode, execute, memory access, writeback) each of which normally ;; takes a single CPU clock cycle.

;; The timings attribute consists of two numbers, the first is the ;; throughput, which is the number of cycles the instruction takes ;; to execute and generate a result. The second is the latency ;; which is the effective number of cycles the instruction takes to ;; execute if its result is used by the following instruction. The ;; latency is always greater than or equal to the throughput. ;; These values were taken from the Appendix of the “MN103E Series ;; Instruction Manual” and the timings for the AM34.

;; Note - it would be nice to use strings rather than integers for ;; the possible values of this attribute, so that we can have the ;; gcc build mechanism check for values that are not supported by ;; the reservations below. But this will not work because the code ;; in mn10300_adjust_sched_cost() needs integers not strings.

(define_attr “timings” "" (const_int 11))

(define_automaton “pipelining”) (define_cpu_unit “throughput” “pipelining”)

(define_insn_reservation “throughput__1_latency__1” 1 (eq_attr “timings” “11”) “throughput”) (define_insn_reservation “throughput__1_latency__2” 2 (eq_attr “timings” “12”) “throughput,nothing”) (define_insn_reservation “throughput__1_latency__3” 3 (eq_attr “timings” “13”) “throughput,nothing*2”) (define_insn_reservation “throughput__1_latency__4” 4 (eq_attr “timings” “14”) “throughput,nothing*3”) (define_insn_reservation “throughput__2_latency__2” 2 (eq_attr “timings” “22”) “throughput*2”) (define_insn_reservation “throughput__2_latency__3” 3 (eq_attr “timings” “23”) “throughput*2,nothing”) (define_insn_reservation “throughput__2_latency__4” 4 (eq_attr “timings” “24”) “throughput2,nothing2”) (define_insn_reservation “throughput__2_latency__5” 5 (eq_attr “timings” “25”) “throughput2,nothing3”) (define_insn_reservation “throughput__3_latency__3” 3 (eq_attr “timings” “33”) “throughput*3”) (define_insn_reservation “throughput__3_latency__7” 7 (eq_attr “timings” “37”) “throughput3,nothing4”) (define_insn_reservation “throughput__4_latency__4” 4 (eq_attr “timings” “44”) “throughput*4”) (define_insn_reservation “throughput__4_latency__7” 7 (eq_attr “timings” “47”) “throughput4,nothing3”) (define_insn_reservation “throughput__4_latency__8” 8 (eq_attr “timings” “48”) “throughput4,nothing4”) (define_insn_reservation “throughput__5_latency__5” 5 (eq_attr “timings” “55”) “throughput*5”) (define_insn_reservation “throughput__6_latency__6” 6 (eq_attr “timings” “66”) “throughput*6”) (define_insn_reservation “throughput__7_latency__7” 7 (eq_attr “timings” “77”) “throughput*7”) (define_insn_reservation “throughput__7_latency__8” 8 (eq_attr “timings” “78”) “throughput*7,nothing”) (define_insn_reservation “throughput__8_latency__8” 8 (eq_attr “timings” “88”) “throughput*8”) (define_insn_reservation “throughput__9_latency__9” 9 (eq_attr “timings” “99”) “throughput*9”) (define_insn_reservation “throughput__8_latency_14” 14 (eq_attr “timings” “814”) “throughput8,nothing6”) (define_insn_reservation “throughput__9_latency_10” 10 (eq_attr “timings” “910”) “throughput*9,nothing”) (define_insn_reservation “throughput_10_latency_10” 10 (eq_attr “timings” “1010”) “throughput*10”) (define_insn_reservation “throughput_12_latency_16” 16 (eq_attr “timings” “1216”) “throughput12,nothing4”) (define_insn_reservation “throughput_13_latency_13” 13 (eq_attr “timings” “1313”) “throughput*13”) (define_insn_reservation “throughput_14_latency_14” 14 (eq_attr “timings” “1414”) “throughput*14”) (define_insn_reservation “throughput_13_latency_17” 17 (eq_attr “timings” “1317”) “throughput13,nothing4”) (define_insn_reservation “throughput_23_latency_27” 27 (eq_attr “timings” “2327”) “throughput23,nothing4”) (define_insn_reservation “throughput_25_latency_31” 31 (eq_attr “timings” “2531”) “throughput25,nothing6”) (define_insn_reservation “throughput_38_latency_39” 39 (eq_attr “timings” “3839”) “throughput*38,nothing”) (define_insn_reservation “throughput_39_latency_40” 40 (eq_attr “timings” “3940”) “throughput*39,nothing”) (define_insn_reservation “throughput_40_latency_40” 40 (eq_attr “timings” “4040”) “throughput*40”) (define_insn_reservation “throughput_41_latency_42” 42 (eq_attr “timings” “4142”) “throughput*41,nothing”) (define_insn_reservation “throughput_42_latency_43” 44 (eq_attr “timings” “4243”) “throughput*42,nothing”) (define_insn_reservation “throughput_43_latency_44” 44 (eq_attr “timings” “4344”) “throughput*43,nothing”) (define_insn_reservation “throughput_45_latency_46” 46 (eq_attr “timings” “4546”) “throughput*45,nothing”) (define_insn_reservation “throughput_47_latency_53” 53 (eq_attr “timings” “4753”) “throughput47,nothing6”)

;; Note - the conflict between memory load/store instructions ;; and floating point instructions described in section 1-7-4 ;; of Chapter 3 of the MN103E Series Instruction Manual is ;; handled by the mn10300_adjust_sched_cost function. ;; ---------------------------------------------------------------------- ;; MOVE INSTRUCTIONS ;; ----------------------------------------------------------------------

;; movqi

(define_expand “movqi” [(set (match_operand:QI 0 “nonimmediate_operand”) (match_operand:QI 1 “general_operand”))] "" { /* One of the ops has to be in a register. */ if (!register_operand (operand0, QImode) && !register_operand (operand1, QImode)) operands[1] = force_reg (QImode, operand1); })

(define_insn “*movqi_internal” [(set (match_operand:QI 0 “nonimmediate_operand” “=r,Dr,D*r,D,m,*z,d”) (match_operand:QI 1 “general_operand” " 0,D*r, i,m,D,d,*z"))] “(register_operand (operands[0], QImode) || register_operand (operands[1], QImode))” { switch (which_alternative) { case 0: return ""; case 1: case 2: case 5: case 6: return “mov %1,%0”; case 3: case 4: return “movbu %1,%0”; default: gcc_unreachable (); } } [(set_attr_alternative “timings” [(const_int 11) (const_int 11) (const_int 11) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 24)) (if_then_else (eq_attr “cpu” “am34”) (const_int 11) (const_int 22)) (const_int 11) (const_int 11) ])] )

;; movhi

(define_expand “movhi” [(set (match_operand:HI 0 “nonimmediate_operand”) (match_operand:HI 1 “general_operand”))] "" { /* One of the ops has to be in a register. */ if (!register_operand (operand1, HImode) && !register_operand (operand0, HImode)) operands[1] = force_reg (HImode, operand1); })

(define_insn “*movhi_internal” [(set (match_operand:HI 0 “nonimmediate_operand” “=r,Dr,D*r,D,m,*z,d”) (match_operand:HI 1 “general_operand” " 0, i,D*r,m,D,d,z"))] “(register_operand (operands[0], HImode) || register_operand (operands[1], HImode))” { switch (which_alternative) { case 0: return ""; case 1: / Note that “MOV imm8,An” is already zero-extending, and is 2 bytes. We have “MOV imm16,Dn” at 3 bytes. The only win for the 4 byte movu is for an 8-bit unsigned move into Rn. / if (TARGET_AM33 && CONST_INT_P (operands[1]) && IN_RANGE (INTVAL (operands[1]), 0x80, 0xff) && REGNO_EXTENDED_P (REGNO (operands[0]), 1)) return “movu %1,%0”; / FALLTHRU */ case 5: case 6: case 2: return “mov %1,%0”; case 3: case 4: return “movhu %1,%0”; default: gcc_unreachable (); } } [(set_attr_alternative “timings” [(const_int 11) (const_int 11) (if_then_else (eq_attr “cpu” “am34”) (const_int 11) (const_int 22)) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 24)) (if_then_else (eq_attr “cpu” “am34”) (const_int 11) (const_int 22)) (if_then_else (eq_attr “cpu” “am34”) (const_int 11) (const_int 22)) (if_then_else (eq_attr “cpu” “am34”) (const_int 11) (const_int 22)) ])] )

;; movsi and helpers

;; We use this to handle addition of two values when one operand is the ;; stack pointer and the other is a memory reference of some kind. Reload ;; does not handle them correctly without this expander. (define_expand “reload_plus_sp_const” [(set (match_operand:SI 0 “register_operand” “=r”) (match_operand:SI 1 “impossible_plus_operand” "")) (clobber (match_operand:SI 2 “register_operand” “=&A”))] "" { rtx dest, scratch, other;

dest = operands[0]; scratch = operands[2];

other = XEXP (operands[1], 1); if (other == stack_pointer_rtx) other = XEXP (operands[1], 0);

if (true_regnum (other) == true_regnum (dest)) { gcc_assert (true_regnum (scratch) != true_regnum (dest)); emit_move_insn (scratch, stack_pointer_rtx); emit_insn (gen_addsi3 (dest, dest, scratch)); } else if (TARGET_AM33 || REGNO_REG_CLASS (true_regnum (dest)) == ADDRESS_REGS) { emit_move_insn (dest, stack_pointer_rtx); if (other == stack_pointer_rtx) emit_insn (gen_addsi3 (dest, dest, dest)); else if (other != const0_rtx) emit_insn (gen_addsi3 (dest, dest, other)); } else { emit_move_insn (scratch, stack_pointer_rtx); if (other == stack_pointer_rtx) { emit_move_insn (dest, scratch); emit_insn (gen_addsi3 (dest, dest, dest)); } else if (other != const0_rtx) { emit_move_insn (dest, other); emit_insn (gen_addsi3 (dest, dest, scratch)); } else emit_move_insn (dest, scratch); } DONE; })

(define_expand “movsi” [(set (match_operand:SI 0 “nonimmediate_operand”) (match_operand:SI 1 “general_operand”))] "" { /* One of the ops has to be in a register. */ if (!register_operand (operand1, SImode) && !register_operand (operand0, SImode)) operands[1] = force_reg (SImode, operand1); if (flag_pic) { rtx temp; if (SYMBOLIC_CONST_P (operands[1])) { if (MEM_P (operands[0])) operands[1] = force_reg (Pmode, operands[1]); else { temp = (!can_create_pseudo_p () ? operands[0] : gen_reg_rtx (Pmode)); operands[1] = mn10300_legitimize_pic_address (operands[1], temp); } } else if (GET_CODE (operands[1]) == CONST && GET_CODE (XEXP (operands[1], 0)) == PLUS && SYMBOLIC_CONST_P (XEXP (XEXP (operands[1], 0), 0))) { temp = !can_create_pseudo_p () ? operands[0] : gen_reg_rtx (Pmode); temp = mn10300_legitimize_pic_address (XEXP (XEXP (operands[1], 0), 0), temp); operands[1] = expand_binop (SImode, add_optab, temp, XEXP (XEXP (operands[1], 0), 1), (!can_create_pseudo_p () ? temp : gen_reg_rtx (Pmode)), 0, OPTAB_LIB_WIDEN); } } })

(define_insn “*movsi_internal” [(set (match_operand:SI 0 “nonimmediate_operand” “=r,r,r,r,m,r, A,*y,*y,*z,*d”) (match_operand:SI 1 “general_operand” " 0,O,i,r,r,m,y, A, i,d,z"))] “register_operand (operands[0], SImode) || register_operand (operands[1], SImode)” { switch (which_alternative) { case 0: return ""; case 1: / imm-reg. / case 2: / See movhi for a discussion of sizes for 8-bit movu. Note that the 24-bit movu is 6 bytes, which is the same size as the full 32-bit mov form for An and Dn. So again movu is only a win for Rn. / if (TARGET_AM33 && CONST_INT_P (operands[1]) && REGNO_EXTENDED_P (REGNO (operands[0]), 1)) { HOST_WIDE_INT val = INTVAL (operands[1]); if (IN_RANGE (val, 0x80, 0xff) || IN_RANGE (val, 0x800000, 0xffffff)) return “movu %1,%0”; } / FALLTHRU / case 3: / reg-reg / case 4: / reg-mem / case 5: / mem-reg / case 6: / sp-reg / case 7: / reg-sp / case 8: / imm-sp / case 9: / reg-mdr / case 10: / mdr-reg / return “mov %1,%0”; default: gcc_unreachable (); } } [(set_attr “isa” ",,,,,,,,am33,,") (set_attr “liw” ",either,,either,,,,,,,") (set_attr “liw_op” “mov”) (set_attr_alternative “timings” [(const_int 11) (const_int 22) (const_int 22) (const_int 11) (if_then_else (eq_attr “cpu” “am34”) (const_int 11) (const_int 22)) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 24)) (if_then_else (eq_attr “cpu” “am34”) (const_int 11) (const_int 22)) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 24)) (const_int 11) (const_int 11) (const_int 11) ])] )

(define_expand “movsf” [(set (match_operand:SF 0 “nonimmediate_operand”) (match_operand:SF 1 “general_operand”))] “TARGET_AM33_2” { /* One of the ops has to be in a register. */ if (!register_operand (operand1, SFmode) && !register_operand (operand0, SFmode)) operands[1] = force_reg (SFmode, operand1); })

(define_insn “*movsf_internal” [(set (match_operand:SF 0 “nonimmediate_operand” “=rf,r,f,r,f,r,f,r,m,f,Q,z,d”) (match_operand:SF 1 “general_operand” " 0,F,F,r,f,f,r,m,r,Q,f,d,z"))] “TARGET_AM33_2 && (register_operand (operands[0], SFmode) || register_operand (operands[1], SFmode))” { switch (which_alternative) { case 0: return ""; case 1: case 3: case 7: case 8: case 11: case 12: return “mov %1,%0”; case 2: case 4: case 5: case 6: case 9: case 10: return “fmov %1,%0”; default: gcc_unreachable (); } } [(set_attr_alternative “timings” [(const_int 11) (const_int 22) (if_then_else (eq_attr “cpu” “am34”) (const_int 47) (const_int 25)) (const_int 11) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 14)) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 12)) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 14)) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 24)) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 24)) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 24)) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 24)) (const_int 22) (const_int 22) ])] )

;; If the flags register is not live, generate CLR instead of MOV 0. ;; For MN103, this is only legal for DATA_REGS; for AM33 this is legal ;; but not a win for ADDRESS_REGS. (define_peephole2 [(set (match_operand:INT 0 “register_operand” "") (const_int 0))] “peep2_regno_dead_p (0, CC_REG) && (REGNO_DATA_P (REGNO (operands[0]), 1) || REGNO_EXTENDED_P (REGNO (operands[0]), 1))” [(parallel [(set (match_dup 0) (const_int 0)) (clobber (reg:CC CC_REG))])] )

(define_insn “*mov_clr” [(set (match_operand:INT 0 “register_operand” “=D”) (const_int 0)) (clobber (reg:CC CC_REG))] "" “clr %0” ) ;; ---------------------------------------------------------------------- ;; ADD INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “addsi3” [(set (match_operand:SI 0 “register_operand” “=r,r,r,!*y,!r”) (plus:SI (match_operand:SI 1 “register_operand” “%0,0,0, 0, r”) (match_operand:SI 2 “nonmemory_operand” “r,O,i, i, r”))) (clobber (reg:CC CC_REG))] "" { return mn10300_output_add (operands, false); } [(set_attr “timings” “11,11,11,11,22”) (set_attr “liw” “either,either,,,*”) (set_attr “liw_op” “add”)] )

;; Note that ADD IMM,SP does not set the flags, so omit that here. (define_insn “*addsi3_flags” [(set (match_operand:SI 0 “register_operand” “=r,!r”) (plus:SI (match_operand:SI 1 “register_operand” “%0, r”) (match_operand:SI 2 “nonmemory_operand” “ri, r”))) (set (reg CC_REG) (compare (plus:SI (match_dup 1) (match_dup 2)) (const_int 0)))] “reload_completed && mn10300_match_ccmode (insn, CCZNCmode)” { return mn10300_output_add (operands, true); } [(set_attr “timings” “11,22”)] )

;; A helper to expand the above, with the CC_MODE filled in. (define_expand “addsi3_flags” [(parallel [(set (match_operand:SI 0 “register_operand”) (plus:SI (match_operand:SI 1 “register_operand”) (match_operand:SI 2 “nonmemory_operand”))) (set (reg:CCZNC CC_REG) (compare:CCZNC (plus:SI (match_dup 1) (match_dup 2)) (const_int 0)))])] "" )

(define_insn “addc_internal” [(set (match_operand:SI 0 “register_operand” “=D,r,r”) (plus:SI (plus:SI (ltu:SI (reg:CC CC_REG) (const_int 0)) (match_operand:SI 1 “register_operand” “%0,0,r”)) (match_operand:SI 2 “reg_or_am33_const_operand” " D,i,r"))) (clobber (reg:CC CC_REG))] “reload_completed” “@ addc %2,%0 addc %2,%0 addc %2,%1,%0” [(set_attr “isa” “*,am33,am33”)] )

(define_expand “adddi3” [(set (match_operand:DI 0 “register_operand” "") (plus:DI (match_operand:DI 1 “register_operand” "") (match_operand:DI 2 “nonmemory_operand” "")))] "" { rtx op0l, op0h, op1l, op1h, op2l, op2h;

op0l = gen_lowpart (SImode, operands[0]); op1l = gen_lowpart (SImode, operands[1]); op2l = gen_lowpart (SImode, operands[2]); op0h = gen_highpart (SImode, operands[0]); op1h = gen_highpart (SImode, operands[1]); op2h = gen_highpart_mode (SImode, DImode, operands[2]);

if (!reg_or_am33_const_operand (op2h, SImode)) op2h = force_reg (SImode, op2h);

emit_insn (gen_adddi3_internal (op0l, op0h, op1l, op2l, op1h, op2h)); DONE; })

;; Note that reload only supports one commutative operand. Thus we cannot ;; auto-swap both the high and low outputs with their matching constraints. ;; For MN103, we're strapped for registers but thankfully the alternatives ;; are few. For AM33, it becomes much easier to not represent the early ;; clobber and 6 permutations of immediate and three-operand adds, but ;; instead allocate a scratch register and do the expansion by hand.

(define_insn_and_split “adddi3_internal” [(set (match_operand:SI 0 “register_operand” “=r, r, r”) (plus:SI (match_operand:SI 2 “register_operand” “%0, 0, r”) (match_operand:SI 3 “nonmemory_operand” “ri,ri,ri”))) (set (match_operand:SI 1 “register_operand” “=D, D, r”) (plus:SI (plus:SI (ltu:SI (plus:SI (match_dup 2) (match_dup 3)) (match_dup 2)) (match_operand:SI 4 “register_operand” " 1, D, r")) (match_operand:SI 5 “reg_or_am33_const_operand” " D, 1,ri"))) (clobber (match_scratch:SI 6 “=X, X,&r”)) (clobber (reg:CC CC_REG))] "" “#” “reload_completed” [(const_int 0)] { rtx op0l = operands[0]; rtx op0h = operands[1]; rtx op1l = operands[2]; rtx op2l = operands[3]; rtx op1h = operands[4]; rtx op2h = operands[5]; rtx scratch = operands[6]; rtx x;

if (reg_overlap_mentioned_p (op0l, op1h)) { emit_move_insn (scratch, op0l); op1h = scratch; if (reg_overlap_mentioned_p (op0l, op2h)) op2h = scratch; } else if (reg_overlap_mentioned_p (op0l, op2h)) { emit_move_insn (scratch, op0l); op2h = scratch; }

if (rtx_equal_p (op0l, op1l)) ; else if (rtx_equal_p (op0l, op2l)) x = op1l, op1l = op2l, op2l = x; else { gcc_assert (TARGET_AM33); if (!REG_P (op2l)) { emit_move_insn (op0l, op2l); op2l = op1l; op1l = op0l; } } emit_insn (gen_addsi3_flags (op0l, op1l, op2l));

if (rtx_equal_p (op0h, op1h)) ; else if (rtx_equal_p (op0h, op2h)) x = op1h, op1h = op2h, op2h = x; else { gcc_assert (TARGET_AM33); if (!REG_P (op2h)) { emit_move_insn (op0h, op2h); op2h = op1h; op1h = op0h; } } emit_insn (gen_addc_internal (op0h, op1h, op2h)); DONE; } [(set_attr “isa” “,,am33”)] )

;; The following pattern is generated by combine when it proves that one ;; of the inputs to the low-part of the double-word add is zero, and thus ;; no carry is generated into the high-part.

(define_insn_and_split “*adddi3_degenerate” [(set (match_operand:SI 0 “register_operand” “=&r,&r”) (match_operand:SI 2 “nonmemory_operand” " 0, 0")) (set (match_operand:SI 1 “register_operand” “=r , r”) (plus:SI (match_operand:SI 3 “register_operand” “%1 , r”) (match_operand:SI 4 “nonmemory_operand” “ri, r”))) (clobber (reg:CC CC_REG))] "" “#” "" [(const_int 0)] { rtx scratch = NULL_RTX; if (!rtx_equal_p (operands[0], operands[2])) { gcc_assert (!reg_overlap_mentioned_p (operands[0], operands[1])); if (reg_overlap_mentioned_p (operands[0], operands[3]) || reg_overlap_mentioned_p (operands[0], operands[4])) { scratch = gen_reg_rtx (SImode); emit_move_insn (scratch, operands[2]); } else emit_move_insn (operands[0], operands[2]); } emit_insn (gen_addsi3 (operands[1], operands[3], operands[4])); if (scratch) emit_move_insn (operands[0], scratch); DONE; })

;; ---------------------------------------------------------------------- ;; SUBTRACT INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “subsi3” [(set (match_operand:SI 0 “register_operand” “=r,r,r,r”) (minus:SI (match_operand:SI 1 “register_operand” “0,0,0,r”) (match_operand:SI 2 “nonmemory_operand” “r,O,i,r”))) (clobber (reg:CC CC_REG))] "" “@ sub %2,%0 sub %2,%0 sub %2,%0 sub %2,%1,%0” [(set_attr “isa” “,,*,am33”) (set_attr “liw” “either,either,,”) (set_attr “liw_op” “sub”) (set_attr “timings” “11,11,11,22”)] )

(define_insn “*subsi3_flags” [(set (match_operand:SI 0 “register_operand” “=r, r”) (minus:SI (match_operand:SI 1 “register_operand” “0, r”) (match_operand:SI 2 “nonmemory_operand” “ri,r”))) (set (reg CC_REG) (compare (minus:SI (match_dup 1) (match_dup 2)) (const_int 0)))] “reload_completed && mn10300_match_ccmode (insn, CCZNCmode)” “@ sub %2,%0 sub %2,%1,%0” [(set_attr “isa” “*,am33”) (set_attr “timings” “11,22”)] )

;; A helper to expand the above, with the CC_MODE filled in. (define_expand “subsi3_flags” [(parallel [(set (match_operand:SI 0 “register_operand”) (minus:SI (match_operand:SI 1 “register_operand”) (match_operand:SI 2 “nonmemory_operand”))) (set (reg:CCZNC CC_REG) (compare:CCZNC (minus:SI (match_dup 1) (match_dup 2)) (const_int 0)))])] "" )

(define_insn “subc_internal” [(set (match_operand:SI 0 “register_operand” “=D,r,r”) (minus:SI (minus:SI (match_operand:SI 1 “register_operand” " 0,0,r") (match_operand:SI 2 “reg_or_am33_const_operand” " D,i,r")) (geu:SI (reg:CC CC_REG) (const_int 0)))) (clobber (reg:CC CC_REG))] “reload_completed” “@ subc %2,%0 subc %2,%0 subc %2,%1,%0” [(set_attr “isa” “*,am33,am33”)] )

(define_expand “subdi3” [(set (match_operand:DI 0 “register_operand” "") (minus:DI (match_operand:DI 1 “register_operand” "") (match_operand:DI 2 “nonmemory_operand” "")))] "" { rtx op0l, op0h, op1l, op1h, op2l, op2h;

op0l = gen_lowpart (SImode, operands[0]); op1l = gen_lowpart (SImode, operands[1]); op2l = gen_lowpart (SImode, operands[2]); op0h = gen_highpart (SImode, operands[0]); op1h = gen_highpart (SImode, operands[1]); op2h = gen_highpart_mode (SImode, DImode, operands[2]);

if (!reg_or_am33_const_operand (op2h, SImode)) op2h = force_reg (SImode, op2h);

emit_insn (gen_subdi3_internal (op0l, op0h, op1l, op1h, op2l, op2h)); DONE; })

;; As with adddi3, the use of the scratch register helps reduce the ;; number of permutations for AM33. ;; ??? The early clobber on op0 avoids a reload bug wherein both output ;; registers are set the same. Consider negate, where both op2 and op3 ;; are 0, are csed to the same input register, and reload fails to undo ;; the cse when satisfying the matching constraints.

(define_insn_and_split “subdi3_internal” [(set (match_operand:SI 0 “register_operand” “=&r, r”) (minus:SI (match_operand:SI 2 “register_operand” " 0, r") (match_operand:SI 4 “nonmemory_operand” " ri,ri"))) (set (match_operand:SI 1 “register_operand” “=D , r”) (minus:SI (minus:SI (match_operand:SI 3 “register_operand” " 1, r") (match_operand:SI 5 “reg_or_am33_const_operand” " D,ri")) (ltu:SI (match_dup 2) (match_dup 4)))) (clobber (match_scratch:SI 6 “=X ,&r”)) (clobber (reg:CC CC_REG))] "" “#” “reload_completed” [(const_int 0)] { rtx op0l = operands[0]; rtx op0h = operands[1]; rtx op1l = operands[2]; rtx op1h = operands[3]; rtx op2l = operands[4]; rtx op2h = operands[5]; rtx scratch = operands[6];

if (reg_overlap_mentioned_p (op0l, op1h)) { emit_move_insn (scratch, op0l); op1h = scratch; if (reg_overlap_mentioned_p (op0l, op2h)) op2h = scratch; } else if (reg_overlap_mentioned_p (op0l, op2h)) { emit_move_insn (scratch, op0l); op2h = scratch; }

if (!rtx_equal_p (op0l, op1l)) { gcc_assert (TARGET_AM33); if (!REG_P (op2l)) { emit_move_insn (op0l, op1l); op1l = op0l; } } emit_insn (gen_subsi3_flags (op0l, op1l, op2l));

if (!rtx_equal_p (op0h, op1h)) { gcc_assert (TARGET_AM33); if (!REG_P (op2h)) { emit_move_insn (op0h, op1h); op1h = op0h; } } emit_insn (gen_subc_internal (op0h, op1h, op2h)); DONE; } [(set_attr “isa” “*,am33”)] )

;; The following pattern is generated by combine when it proves that one ;; of the inputs to the low-part of the double-word sub is zero, and thus ;; no carry is generated into the high-part.

(define_insn_and_split “*subdi3_degenerate” [(set (match_operand:SI 0 “register_operand” “=&r,&r”) (match_operand:SI 2 “nonmemory_operand” " 0, 0")) (set (match_operand:SI 1 “register_operand” “=r , r”) (minus:SI (match_operand:SI 3 “register_operand” " 1, r") (match_operand:SI 4 “nonmemory_operand” " ri, r"))) (clobber (reg:CC CC_REG))] "" “#” "" [(const_int 0)] { rtx scratch = NULL_RTX; if (!rtx_equal_p (operands[0], operands[2])) { gcc_assert (!reg_overlap_mentioned_p (operands[0], operands[1])); if (reg_overlap_mentioned_p (operands[0], operands[3]) || reg_overlap_mentioned_p (operands[0], operands[4])) { scratch = gen_reg_rtx (SImode); emit_move_insn (scratch, operands[2]); } else emit_move_insn (operands[0], operands[2]); } emit_insn (gen_subsi3 (operands[1], operands[3], operands[4])); if (scratch) emit_move_insn (operands[0], scratch); DONE; })

(define_insn_and_split “negsi2” [(set (match_operand:SI 0 “register_operand” “=D,&r”) (neg:SI (match_operand:SI 1 “register_operand” " 0, r"))) (clobber (reg:CC CC_REG))] "" “#” “&& reload_completed” [(const_int 0)] { /* Recall that twos-compliment is ones-compliment plus one. When allocated in DATA_REGS this is 2+1 bytes; otherwise (for am33) this is 3+3 bytes.

 For AM33, it would have been possible to load zero and use the
 three-address subtract to have a total size of 3+4*N bytes for
 multiple negations, plus increased throughput.  Not attempted here.  */

if (true_regnum (operands[0]) == true_regnum (operands[1])) { emit_insn (gen_one_cmplsi2 (operands[0], operands[0])); emit_insn (gen_addsi3 (operands[0], operands[0], const1_rtx)); } else { emit_move_insn (operands[0], const0_rtx); emit_insn (gen_subsi3 (operands[0], operands[0], operands[1])); } DONE; })

;; ---------------------------------------------------------------------- ;; MULTIPLY INSTRUCTIONS ;; ----------------------------------------------------------------------

;; ??? Note that AM33 has a third multiply variant that puts the high part ;; into the MDRQ register, however this variant also constrains the inputs ;; to be in DATA_REGS and thus isn't as helpful as it might be considering ;; the existence of the 4-operand multiply. Nor is there a set of divide ;; insns that use MDRQ. Given that there is an IMM->MDRQ insn, this would ;; have been very handy for starting udivmodsi4...

(define_expand “mulsidi3” [(set (match_operand:DI 0 “register_operand” "") (mult:DI (sign_extend:DI (match_operand:SI 1 “register_operand” "")) (sign_extend:DI (match_operand:SI 2 “register_operand” ""))))] "" { emit_insn (gen_mulsidi3_internal (gen_lowpart (SImode, operands[0]), gen_highpart (SImode, operands[0]), operands[1], operands[2])); DONE; })

(define_insn “mulsidi3_internal” [(set (match_operand:SI 0 “register_operand” “=D,r”) (mult:SI (match_operand:SI 2 “register_operand” “%0,r”) (match_operand:SI 3 “register_operand” " D,r"))) (set (match_operand:SI 1 “register_operand” “=z,r”) (truncate:SI (ashiftrt:DI (mult:DI (sign_extend:DI (match_dup 2)) (sign_extend:DI (match_dup 3))) (const_int 32)))) (clobber (reg:CC CC_REG))] "" { if (which_alternative == 1) return “mul %2,%3,%1,%0”; else if (TARGET_MULT_BUG) return “nop;nop;mul %3,%0”; else return “mul %3,%0”; } [(set_attr “isa” “*,am33”) (set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 24) (const_int 23)))] )

(define_expand “umulsidi3” [(set (match_operand:DI 0 “register_operand” "") (mult:DI (zero_extend:DI (match_operand:SI 1 “register_operand” "")) (zero_extend:DI (match_operand:SI 2 “register_operand” "")))) (clobber (reg:CC CC_REG))] "" { emit_insn (gen_umulsidi3_internal (gen_lowpart (SImode, operands[0]), gen_highpart (SImode, operands[0]), operands[1], operands[2])); DONE; })

(define_insn “umulsidi3_internal” [(set (match_operand:SI 0 “register_operand” “=D,r”) (mult:SI (match_operand:SI 2 “register_operand” “%0,r”) (match_operand:SI 3 “register_operand” " D,r"))) (set (match_operand:SI 1 “register_operand” “=z,r”) (truncate:SI (lshiftrt:DI (mult:DI (zero_extend:DI (match_dup 2)) (zero_extend:DI (match_dup 3))) (const_int 32)))) (clobber (reg:CC CC_REG))] "" { if (which_alternative == 1) return “mulu %2,%3,%1,%0”; else if (TARGET_MULT_BUG) return “nop;nop;mulu %3,%0”; else return “mulu %3,%0”; } [(set_attr “isa” “*,am33”) (set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 24) (const_int 23)))] )

(define_expand “mulsi3” [(parallel [(set (match_operand:SI 0 “register_operand”) (mult:SI (match_operand:SI 1 “register_operand”) (match_operand:SI 2 “reg_or_am33_const_operand”))) (clobber (match_scratch:SI 3)) (clobber (reg:CC CC_REG))])] "" )

(define_insn “*mulsi3” [(set (match_operand:SI 0 “register_operand” “=D, r,r”) (mult:SI (match_operand:SI 2 “register_operand” “%0, 0,r”) (match_operand:SI 3 “reg_or_am33_const_operand” " D,ri,r"))) (clobber (match_scratch:SI 1 “=z, z,r”)) (clobber (reg:CC CC_REG))] "" { if (which_alternative == 2) return “mul %2,%3,%1,%0”; else if (TARGET_MULT_BUG) return “nop;nop;mul %3,%0”; else return “mul %3,%0”; } [(set_attr “isa” “*,am33,am33”) (set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 24) (const_int 23)))] )

(define_expand “udivmodsi4” [(parallel [(set (match_operand:SI 0 “register_operand”) (udiv:SI (match_operand:SI 1 “register_operand”) (match_operand:SI 2 “register_operand”))) (set (match_operand:SI 3 “register_operand”) (umod:SI (match_dup 1) (match_dup 2))) (use (const_int 0)) (clobber (reg:CC CC_REG))])] "" )

;; Note the trick to get reload to put the zero into the MDR register, ;; rather than exposing the load early and letting CSE or someone try ;; to share the zeros between division insns. Which tends to result ;; in sequences like 0->r0->d0->mdr.

(define_insn “*udivmodsi4” [(set (match_operand:SI 0 “register_operand” “=D”) (udiv:SI (match_operand:SI 2 “register_operand” " 0") (match_operand:SI 3 “register_operand” " D"))) (set (match_operand:SI 1 “register_operand” “=z”) (umod:SI (match_dup 2) (match_dup 3))) (use (match_operand:SI 4 “nonmemory_operand” " 1")) (clobber (reg:CC CC_REG))] "" “divu %3,%0” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 3839) (const_int 4243)))] )

(define_expand “divmodsi4” [(parallel [(set (match_operand:SI 0 “register_operand” "") (div:SI (match_operand:SI 1 “register_operand” "") (match_operand:SI 2 “register_operand” ""))) (set (match_operand:SI 3 “register_operand” "") (mod:SI (match_dup 1) (match_dup 2))) (use (match_dup 4)) (clobber (reg:CC CC_REG))])] "" { operands[4] = gen_reg_rtx (SImode); emit_insn (gen_ext_internal (operands[4], operands[1])); })

;; ??? Ideally we'd represent this via shift, but it seems like adding a ;; special-case pattern for (ashiftrt x 31) is just as likely to result ;; in poor register allocation choices. (define_insn “ext_internal” [(set (match_operand:SI 0 “register_operand” “=z”) (unspec:SI [(match_operand:SI 1 “register_operand” “D”)] UNSPEC_EXT))] "" “ext %1” )

(define_insn “*divmodsi4” [(set (match_operand:SI 0 “register_operand” “=D”) (div:SI (match_operand:SI 2 “register_operand” " 0") (match_operand:SI 3 “register_operand” " D"))) (set (match_operand:SI 1 “register_operand” “=z”) (mod:SI (match_dup 2) (match_dup 3))) (use (match_operand:SI 4 “register_operand” " 1")) (clobber (reg:CC CC_REG))] "" “div %3,%0”; [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 3839) (const_int 4243)))] )

;; ---------------------------------------------------------------------- ;; AND INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “andsi3” [(set (match_operand:SI 0 “register_operand” “=D,D,r”) (and:SI (match_operand:SI 1 “register_operand” “%0,0,r”) (match_operand:SI 2 “nonmemory_operand” " i,D,r"))) (clobber (reg:CC CC_REG))] "" “@ and %2,%0 and %2,%0 and %2,%1,%0” [(set_attr “isa” “,,am33”) (set_attr “liw” “,op1,”) (set_attr “liw_op” “and”) (set_attr “timings” “22,11,11”)] )

(define_insn “*andsi3_flags” [(set (match_operand:SI 0 “register_operand” “=D,D,r”) (and:SI (match_operand:SI 1 “register_operand” “%0,0,r”) (match_operand:SI 2 “nonmemory_operand” " i,D,r"))) (set (reg CC_REG) (compare (and:SI (match_dup 1) (match_dup 2)) (const_int 0)))] “reload_completed && mn10300_match_ccmode (insn, CCZNmode)” “@ and %2,%0 and %2,%0 and %2,%1,%0” [(set_attr “isa” “,,am33”) (set_attr “timings” “22,11,11”)] )

;; Make sure we generate extensions instead of ANDs.

(define_split [(parallel [(set (match_operand:SI 0 “register_operand” "") (and:SI (match_operand:SI 1 “register_operand” "") (const_int 255))) (clobber (reg:CC CC_REG))])] "" [(set (match_dup 0) (zero_extend:SI (match_dup 1)))] { operands[1] = gen_lowpart (QImode, operands[1]); } )

(define_split [(parallel [(set (match_operand:SI 0 “register_operand” "") (and:SI (match_operand:SI 1 “register_operand” "") (const_int 65535))) (clobber (reg:CC CC_REG))])] "" [(set (match_dup 0) (zero_extend:SI (match_dup 1)))] { operands[1] = gen_lowpart (HImode, operands[1]); } )

;; Split AND by an appropriate constant into two shifts. Recall that ;; operations with a full 32-bit immediate require an extra cycle, so ;; this is a size optimization with no speed penalty. This only applies ;; do DATA_REGS; the shift insns that AM33 adds are too large for a win.

(define_split [(parallel [(set (match_operand:SI 0 “register_operand” "") (and:SI (match_dup 0) (match_operand:SI 1 “const_int_operand” ""))) (clobber (reg:CC CC_REG))])] “reload_completed && REGNO_DATA_P (true_regnum (operands[0]), 1) && mn10300_split_and_operand_count (operands[1]) != 0” [(const_int 0)] { int count = mn10300_split_and_operand_count (operands[1]); if (count > 0) { emit_insn (gen_lshrsi3 (operands[0], operands[0], GEN_INT (count))); emit_insn (gen_ashlsi3 (operands[0], operands[0], GEN_INT (count))); } else { emit_insn (gen_ashlsi3 (operands[0], operands[0], GEN_INT (-count))); emit_insn (gen_lshrsi3 (operands[0], operands[0], GEN_INT (-count))); } DONE; })

;; ---------------------------------------------------------------------- ;; OR INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “iorsi3” [(set (match_operand:SI 0 “register_operand” “=D,D,r”) (ior:SI (match_operand:SI 1 “register_operand” “%0,0,r”) (match_operand:SI 2 “nonmemory_operand” " i,D,r"))) (clobber (reg:CC CC_REG))] "" “@ or %2,%0 or %2,%0 or %2,%1,%0” [(set_attr “isa” “,,am33”) (set_attr “liw” “,op1,”) (set_attr “liw_op” “or”) (set_attr “timings” “22,11,11”)] )

(define_insn “*iorsi3_flags” [(set (match_operand:SI 0 “register_operand” “=D,D,r”) (ior:SI (match_operand:SI 1 “register_operand” “%0,0,r”) (match_operand:SI 2 “nonmemory_operand” " i,D,r"))) (set (reg CC_REG) (compare (ior:SI (match_dup 1) (match_dup 2)) (const_int 0)))] “reload_completed && mn10300_match_ccmode (insn, CCZNmode)” “@ or %2,%0 or %2,%0 or %2,%1,%0” [(set_attr “isa” “,,am33”) (set_attr “timings” “22,11,11”)] )

;; ---------------------------------------------------------------------- ;; XOR INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “xorsi3” [(set (match_operand:SI 0 “register_operand” “=D,D,r”) (xor:SI (match_operand:SI 1 “register_operand” “%0,0,r”) (match_operand:SI 2 “nonmemory_operand” " i,D,r"))) (clobber (reg:CC CC_REG))] "" “@ xor %2,%0 xor %2,%0 xor %2,%1,%0” [(set_attr “isa” “,,am33”) (set_attr “liw” “,op1,”) (set_attr “liw_op” “xor”) (set_attr “timings” “22,11,11”)] )

(define_insn “*xorsi3_flags” [(set (match_operand:SI 0 “register_operand” “=D,D,r”) (xor:SI (match_operand:SI 1 “register_operand” “%0,0,r”) (match_operand:SI 2 “nonmemory_operand” " i,D,r"))) (set (reg CC_REG) (compare (xor:SI (match_dup 1) (match_dup 2)) (const_int 0)))] “reload_completed && mn10300_match_ccmode (insn, CCZNmode)” “@ xor %2,%0 xor %2,%0 xor %2,%1,%0” [(set_attr “isa” “,,am33”) (set_attr “timings” “22,11,11”)] )

;; ---------------------------------------------------------------------- ;; NOT INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “one_cmplsi2” [(set (match_operand:SI 0 “register_operand” “=D”) (not:SI (match_operand:SI 1 “register_operand” " 0"))) (clobber (reg:CC CC_REG))] "" “not %0” )

(define_insn “*one_cmplsi2_flags” [(set (match_operand:SI 0 “register_operand” “=D”) (not:SI (match_operand:SI 1 “register_operand” " 0"))) (set (reg CC_REG) (compare (not:SI (match_dup 1)) (const_int 0)))] “reload_completed && mn10300_match_ccmode (insn, CCZNmode)” “not %0” ) ;; ---------------------------------------------------------------------- ;; COMPARE AND BRANCH INSTRUCTIONS ;; ----------------------------------------------------------------------

;; We expand the comparison into a single insn so that it will not be split ;; up by reload. (define_expand “cbranchsi4” [(set (pc) (if_then_else (match_operator 0 “ordered_comparison_operator” [(match_operand:SI 1 “register_operand”) (match_operand:SI 2 “nonmemory_operand”)]) (label_ref (match_operand 3 "")) (pc)))] "" "" )

(define_insn_and_split “*cbranchsi4_cmp” [(set (pc) (if_then_else (match_operator 3 “ordered_comparison_operator” [(match_operand:SI 0 “register_operand” “r”) (match_operand:SI 1 “nonmemory_operand” “ri”)]) (match_operand 2 “label_ref_operand” "") (pc)))] "" “#” “reload_completed” [(const_int 0)] { mn10300_split_cbranch (CCmode, operands[3], operands[2]); DONE; })

(define_insn “cmpsi” [(set (reg CC_REG) (compare (match_operand:SI 0 “register_operand” “r,r,r”) (match_operand:SI 1 “nonmemory_operand” “r,O,i”)))] “reload_completed” { /* The operands of CMP must be distinct registers. In the case where we've failed to optimize the comparison of a register to itself, we must use another method to set the Z flag. We can achieve this effect with a BTST 0,D0. This will not alter the contents of D0; the use of d0 is arbitrary; any data register would work. / if (rtx_equal_p (operands[0], operands[1])) return “btst 0,d0”; else return “cmp %1,%0”; } [(set_attr_alternative “timings” [(if_then_else (eq_attr “cpu” “am34”) (const_int 11) (const_int 22)) (if_then_else (eq_attr “cpu” “am34”) (const_int 11) (const_int 22)) (if_then_else (eq_attr “cpu” “am34”) (const_int 11) (const_int 22))]) (set_attr “liw” "either,either,") (set_attr “liw_op” “cmp”)] )

(define_insn “*integer_conditional_branch” [(set (pc) (if_then_else (match_operator 0 “comparison_operator” [(match_operand 2 “int_mode_flags” "") (const_int 0)]) (label_ref (match_operand 1 "" "")) (pc)))] “reload_completed” “b%b0 %1” )

(define_insn_and_split “*cbranchsi4_btst” [(set (pc) (if_then_else (match_operator 3 “CCZN_comparison_operator” [(and:SI (match_operand:SI 0 “register_operand” “D”) (match_operand:SI 1 “immediate_operand” “i”)) (const_int 0)]) (match_operand 2 “label_ref_operand” "") (pc)))] "" “#” “reload_completed” [(const_int 0)] { mn10300_split_cbranch (CCZNmode, operands[3], operands[2]); DONE; })

(define_insn “*btstsi” [(set (reg:CCZN CC_REG) (compare:CCZN (and:SI (match_operand:SI 0 “register_operand” “D”) (match_operand:SI 1 “immediate_operand” “i”)) (const_int 0)))] “reload_completed” “btst %1,%0” )

(define_expand “cbranchsf4” [(set (pc) (if_then_else (match_operator 0 “ordered_comparison_operator” [(match_operand:SF 1 “register_operand”) (match_operand:SF 2 “nonmemory_operand”)]) (label_ref (match_operand 3 "")) (pc)))] “TARGET_AM33_2” "" )

(define_insn_and_split “*cbranchsf4_cmp” [(set (pc) (if_then_else (match_operator 3 “ordered_comparison_operator” [(match_operand:SF 0 “register_operand” “f”) (match_operand:SF 1 “nonmemory_operand” “fF”)]) (match_operand 2 “label_ref_operand” "") (pc))) ] “TARGET_AM33_2” “#” “&& reload_completed” [(const_int 0)] { mn10300_split_cbranch (CC_FLOATmode, operands[3], operands[2]); DONE; })

(define_insn “*am33_cmpsf” [(set (reg:CC_FLOAT CC_REG) (compare:CC_FLOAT (match_operand:SF 0 “register_operand” “f”) (match_operand:SF 1 “nonmemory_operand” “fF”)))] “TARGET_AM33_2 && reload_completed” “fcmp %1, %0” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 17) (const_int 25)))] )

(define_insn “*float_conditional_branch” [(set (pc) (if_then_else (match_operator 0 “comparison_operator” [(reg:CC_FLOAT CC_REG) (const_int 0)]) (label_ref (match_operand 1 "" "")) (pc)))] “TARGET_AM33_2 && reload_completed” “fb%b0 %1” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 44) (const_int 33)))] )

;; Unconditional and other jump instructions.

(define_insn “jump” [(set (pc) (label_ref (match_operand 0 "" "")))] "" “jmp %l0” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 11) (const_int 44)))] )

(define_insn “indirect_jump” [(set (pc) (match_operand:SI 0 “register_operand” “a”))] "" “jmp (%0)” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 11) (const_int 33)))] )

(define_expand “builtin_setjmp_receiver” [(match_operand 0 "" "")] “flag_pic” { emit_insn (gen_load_pic ()); DONE; })

(define_expand “casesi” [(match_operand:SI 0 “register_operand”) (match_operand:SI 1 “immediate_operand”) (match_operand:SI 2 “immediate_operand”) (match_operand 3 "" "") (match_operand 4 "")] "" { rtx table = gen_reg_rtx (SImode); rtx index = gen_reg_rtx (SImode); rtx addr = gen_reg_rtx (Pmode); rtx test;

emit_move_insn (table, gen_rtx_LABEL_REF (VOIDmode, operands[3])); emit_insn (gen_addsi3 (index, operands[0], GEN_INT (- INTVAL (operands[1])))); test = gen_rtx_fmt_ee (GTU, VOIDmode, index, operands[2]); emit_jump_insn (gen_cbranchsi4 (test, index, operands[2], operands[4]));

emit_insn (gen_ashlsi3 (index, index, const2_rtx)); emit_move_insn (addr, gen_rtx_MEM (SImode, gen_rtx_PLUS (SImode, table, index))); if (flag_pic) emit_insn (gen_addsi3 (addr, addr, table));

emit_jump_insn (gen_tablejump (addr, operands[3])); DONE; })

(define_insn “tablejump” [(set (pc) (match_operand:SI 0 “register_operand” “a”)) (use (label_ref (match_operand 1 "" "")))] "" “jmp (%0)” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 11) (const_int 33)))] )

;; Call subroutine with no return value.

(define_expand “call” [(call (match_operand:QI 0 “general_operand”) (match_operand:SI 1 “general_operand”))] "" { rtx fn = XEXP (operands[0], 0);

if (flag_pic && GET_CODE (fn) == SYMBOL_REF) { if (MN10300_GLOBAL_P (fn)) { /* The PLT code won‘t run on AM30, but then, there’s no shared library support for AM30 either, so we just assume the linker is going to adjust all @PLT relocs to the actual symbols. */ emit_use (pic_offset_table_rtx); fn = gen_rtx_UNSPEC (SImode, gen_rtvec (1, fn), UNSPEC_PLT); } else fn = gen_rtx_UNSPEC (SImode, gen_rtvec (1, fn), UNSPEC_PIC); } if (! call_address_operand (fn, VOIDmode)) fn = force_reg (SImode, fn);

XEXP (operands[0], 0) = fn; })

(define_insn “*call_internal” [(call (mem:QI (match_operand:SI 0 “call_address_operand” “a,S”)) (match_operand:SI 1 "" ""))] "" “@ calls %C0 call %C0,[],0” [(set_attr_alternative “timings” [(if_then_else (eq_attr “cpu” “am34”) (const_int 33) (const_int 44)) (if_then_else (eq_attr “cpu” “am34”) (const_int 55) (const_int 33)) ]) ] )

;; Call subroutine, returning value in operand 0 ;; (which must be a hard register).

(define_expand “call_value” [(set (match_operand 0 "") (call (match_operand:QI 1 “general_operand”) (match_operand:SI 2 “general_operand”)))] "" { rtx fn = XEXP (operands[1], 0);

if (flag_pic && GET_CODE (fn) == SYMBOL_REF) { if (MN10300_GLOBAL_P (fn)) { /* The PLT code won‘t run on AM30, but then, there’s no shared library support for AM30 either, so we just assume the linker is going to adjust all @PLT relocs to the actual symbols. */ emit_use (pic_offset_table_rtx); fn = gen_rtx_UNSPEC (SImode, gen_rtvec (1, fn), UNSPEC_PLT); } else fn = gen_rtx_UNSPEC (SImode, gen_rtvec (1, fn), UNSPEC_PIC); } if (! call_address_operand (fn, VOIDmode)) fn = force_reg (SImode, fn);

XEXP (operands[1], 0) = fn; })

(define_insn “call_value_internal” [(set (match_operand 0 "" "") (call (mem:QI (match_operand:SI 1 “call_address_operand” “a,S”)) (match_operand:SI 2 "" "")))] "" “@ calls %C1 call %C1,[],0” [(set_attr_alternative “timings” [(if_then_else (eq_attr “cpu” “am34”) (const_int 33) (const_int 44)) (if_then_else (eq_attr “cpu” “am34”) (const_int 55) (const_int 33)) ]) ] )

(define_expand “untyped_call” [(parallel [(call (match_operand 0 "") (const_int 0)) (match_operand 1 "") (match_operand 2 "")])] "" { int i;

emit_call_insn (gen_call (operands[0], const0_rtx));

for (i = 0; i < XVECLEN (operands[2], 0); i++) { rtx set = XVECEXP (operands[2], 0, i); emit_move_insn (SET_DEST (set), SET_SRC (set)); } DONE; })

(define_insn “nop” [(const_int 0)] "" “nop” ) ;; ---------------------------------------------------------------------- ;; EXTEND INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “zero_extendqisi2” [(set (match_operand:SI 0 “register_operand” “=D,D,r”) (zero_extend:SI (match_operand:QI 1 “nonimmediate_operand” " 0,m,r")))] "" “@ extbu %0 movbu %1,%0 extbu %1,%0” [(set_attr “isa” “,,am33”) (set_attr_alternative “timings” [(const_int 11) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 24)) (const_int 11) ])] )

(define_insn “zero_extendhisi2” [(set (match_operand:SI 0 “register_operand” “=D,D,r”) (zero_extend:SI (match_operand:HI 1 “nonimmediate_operand” " 0,m,r")))] "" “@ exthu %0 movhu %1,%0 exthu %1,%0” [(set_attr “isa” “,,am33”) (set_attr_alternative “timings” [(const_int 11) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 24)) (const_int 11)])] )

(define_insn “extendqisi2” [(set (match_operand:SI 0 “register_operand” “=D,r”) (sign_extend:SI (match_operand:QI 1 “register_operand” “0,r”)))] "" “@ extb %0 extb %1,%0” [(set_attr “isa” “*,am33”)] )

(define_insn “extendhisi2” [(set (match_operand:SI 0 “register_operand” “=D,r”) (sign_extend:SI (match_operand:HI 1 “register_operand” “0,r”)))] "" “@ exth %0 exth %1,%0” [(set_attr “isa” “*,am33”)] ) ;; ---------------------------------------------------------------------- ;; SHIFTS ;; ----------------------------------------------------------------------

(define_insn “ashlsi3” [(set (match_operand:SI 0 “register_operand” “=r,D,d,d,D,D,D,r”) (ashift:SI (match_operand:SI 1 “register_operand” " 0,0,0,0,0,0,0,r") (match_operand:QI 2 “nonmemory_operand” " J,K,M,L,D,O,i,r"))) (clobber (reg:CC CC_REG))] "" “@ add %0,%0 asl2 %0 asl2 %0;add %0,%0 asl2 %0;asl2 %0 asl %S2,%0 asl %S2,%0 asl %S2,%0 asl %2,%1,%0” [(set_attr “isa” “,,,,,,*,am33”) (set_attr “liw” “op2,op2,op2,op2,op2,op2,,”) (set_attr “liw_op” “asl”) (set_attr “timings” “11,11,22,22,11,11,11,11”)] )

(define_insn “lshrsi3” [(set (match_operand:SI 0 “register_operand” “=D,D,D,r”) (lshiftrt:SI (match_operand:SI 1 “register_operand” “0,0,0,r”) (match_operand:QI 2 “nonmemory_operand” “D,O,i,r”))) (clobber (reg:CC CC_REG))] "" “@ lsr %S2,%0 lsr %S2,%0 lsr %S2,%0 lsr %2,%1,%0” [(set_attr “isa” “,,*,am33”) (set_attr “liw” “op2,op2,,”) (set_attr “liw_op” “lsr”)] )

(define_insn “ashrsi3” [(set (match_operand:SI 0 “register_operand” “=D,D,D,r”) (ashiftrt:SI (match_operand:SI 1 “register_operand” “0,0,0,r”) (match_operand:QI 2 “nonmemory_operand” “D,O,i,r”))) (clobber (reg:CC CC_REG))] "" “@ asr %S2,%0 asr %S2,%0 asr %S2,%0 asr %2,%1,%0” [(set_attr “isa” “,,*,am33”) (set_attr “liw” “op2,op2,,”) (set_attr “liw_op” “asr”)] )

;; ---------------------------------------------------------------------- ;; MISCELLANEOUS ;; ----------------------------------------------------------------------

;; Note the use of the (const_int 0) when generating the insn that matches ;; the bsch pattern. This ensures that the destination register is ;; initialised with 0 which will make the BSCH instruction set searching ;; at bit 31. ;; ;; The XOR in the instruction sequence below is there because the BSCH ;; instruction returns the bit number of the highest set bit and we want ;; the number of zero bits above that bit. The AM33 does not have a ;; reverse subtraction instruction, but we can use a simple xor instead ;; since we know that the top 27 bits are clear. (define_expand “clzsi2” [(parallel [(set (match_operand:SI 0 “register_operand”) (unspec:SI [(match_operand:SI 1 “register_operand”) (const_int 0)] UNSPEC_BSCH)) (clobber (reg:CC CC_REG))]) (parallel [(set (match_dup 0) (xor:SI (match_dup 0) (const_int 31))) (clobber (reg:CC CC_REG))])] “TARGET_AM33” )

(define_insn “*bsch” [(set (match_operand:SI 0 “register_operand” “=r”) (unspec:SI [(match_operand:SI 1 “register_operand” “r”) (match_operand:SI 2 “nonmemory_operand” “0”)] UNSPEC_BSCH)) (clobber (reg:CC CC_REG))] “TARGET_AM33” “bsch %1, %0” )

;; ---------------------------------------------------------------------- ;; FP INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “abssf2” [(set (match_operand:SF 0 “register_operand” “=f,f”) (abs:SF (match_operand:SF 1 “register_operand” “0,?f”)))] “TARGET_AM33_2” “@ fabs %0 fabs %1, %0” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 17) (const_int 14)))] )

(define_insn “negsf2” [(set (match_operand:SF 0 “register_operand” “=f,f”) (neg:SF (match_operand:SF 1 “register_operand” “0,?f”)))] “TARGET_AM33_2” “@ fneg %0 fneg %1, %0” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 17) (const_int 14)))] )

(define_expand “sqrtsf2” [(set (match_operand:SF 0 “register_operand” "") (sqrt:SF (match_operand:SF 1 “register_operand” "")))] “TARGET_AM33_2 && flag_unsafe_math_optimizations” { rtx scratch = gen_reg_rtx (SFmode); emit_insn (gen_rsqrtsf2 (scratch, operands[1], CONST1_RTX (SFmode))); emit_insn (gen_divsf3 (operands[0], force_reg (SFmode, CONST1_RTX (SFmode)), scratch)); DONE; })

(define_insn “rsqrtsf2” [(set (match_operand:SF 0 “register_operand” “=f,f”) (div:SF (match_operand:SF 2 “const_1f_operand” “F,F”) (sqrt:SF (match_operand:SF 1 “register_operand” “0,?f”)))) (clobber (reg:CC_FLOAT CC_REG))] “TARGET_AM33_2” “@ frsqrt %0 frsqrt %1, %0” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 4753) (const_int 2327)))] )

(define_insn “addsf3” [(set (match_operand:SF 0 “register_operand” “=f,f”) (plus:SF (match_operand:SF 1 “register_operand” “%0,f”) (match_operand:SF 2 “nonmemory_operand” “f,?fF”))) (clobber (reg:CC_FLOAT CC_REG))] “TARGET_AM33_2” “@ fadd %2, %0 fadd %2, %1, %0” [(set_attr_alternative “timings” [(if_then_else (eq_attr “cpu” “am34”) (const_int 17) (const_int 14)) (if_then_else (eq_attr “cpu” “am34”) (const_int 17) (const_int 25)) ])] )

(define_insn “subsf3” [(set (match_operand:SF 0 “register_operand” “=f,f”) (minus:SF (match_operand:SF 1 “register_operand” “0,f”) (match_operand:SF 2 “nonmemory_operand” “f,?fF”))) (clobber (reg:CC_FLOAT CC_REG))] “TARGET_AM33_2” “@ fsub %2, %0 fsub %2, %1, %0” [(set_attr_alternative “timings” [(if_then_else (eq_attr “cpu” “am34”) (const_int 17) (const_int 14)) (if_then_else (eq_attr “cpu” “am34”) (const_int 17) (const_int 25)) ])] )

(define_insn “mulsf3” [(set (match_operand:SF 0 “register_operand” “=f,f”) (mult:SF (match_operand:SF 1 “register_operand” “%0,f”) (match_operand:SF 2 “nonmemory_operand” “f,?fF”))) (clobber (reg:CC_FLOAT CC_REG)) ] “TARGET_AM33_2” “@ fmul %2, %0 fmul %2, %1, %0” [(set_attr_alternative “timings” [(if_then_else (eq_attr “cpu” “am34”) (const_int 17) (const_int 14)) (if_then_else (eq_attr “cpu” “am34”) (const_int 17) (const_int 25)) ])] )

(define_insn “divsf3” [(set (match_operand:SF 0 “register_operand” “=f,f”) (div:SF (match_operand:SF 1 “register_operand” “0,f”) (match_operand:SF 2 “nonmemory_operand” “f,?fF”))) (clobber (reg:CC_FLOAT CC_REG))] “TARGET_AM33_2” “@ fdiv %2, %0 fdiv %2, %1, %0” [(set_attr_alternative “timings” [(if_then_else (eq_attr “cpu” “am34”) (const_int 2531) (const_int 1216)) (if_then_else (eq_attr “cpu” “am34”) (const_int 2531) (const_int 1317)) ])] )

(define_insn “fmasf4” [(set (match_operand:SF 0 “register_operand” “=c”) (fma:SF (match_operand:SF 1 “register_operand” “f”) (match_operand:SF 2 “register_operand” “f”) (match_operand:SF 3 “register_operand” “f”))) (clobber (reg:CC_FLOAT CC_REG)) ] “TARGET_AM33_2” “fmadd %1, %2, %3, %0” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 17) (const_int 24)))] )

(define_insn “fmssf4” [(set (match_operand:SF 0 “register_operand” “=c”) (fma:SF (match_operand:SF 1 “register_operand” “f”) (match_operand:SF 2 “register_operand” “f”) (neg:SF (match_operand:SF 3 “register_operand” “f”)))) (clobber (reg:CC_FLOAT CC_REG)) ] “TARGET_AM33_2” “fmsub %1, %2, %3, %0” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 17) (const_int 24)))] )

(define_insn “fnmasf4” [(set (match_operand:SF 0 “register_operand” “=c”) (fma:SF (neg:SF (match_operand:SF 1 “register_operand” “f”)) (match_operand:SF 2 “register_operand” “f”) (match_operand:SF 3 “register_operand” “f”))) (clobber (reg:CC_FLOAT CC_REG)) ] “TARGET_AM33_2” “fnmadd %1, %2, %3, %0” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 17) (const_int 24)))] )

(define_insn “fnmssf4” [(set (match_operand:SF 0 “register_operand” “=c”) (fma:SF (neg:SF (match_operand:SF 1 “register_operand” “f”)) (match_operand:SF 2 “register_operand” “f”) (neg:SF (match_operand:SF 3 “register_operand” “f”)))) (clobber (reg:CC_FLOAT CC_REG)) ] “TARGET_AM33_2” “fnmsub %1, %2, %3, %0” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 17) (const_int 24)))] )

;; ---------------------------------------------------------------------- ;; PROLOGUE/EPILOGUE ;; ---------------------------------------------------------------------- (define_expand “prologue” [(const_int 0)] "" { mn10300_expand_prologue (); DONE; } )

(define_expand “epilogue” [(return)] "" { mn10300_expand_epilogue (); DONE; } )

(define_insn “return” [(return)] “mn10300_can_use_rets_insn ()” { /* The RETF insn is 4 cycles faster than RETS, though 1 byte larger. */ if (optimize_insn_for_speed_p () && mn10300_can_use_retf_insn ()) return “retf [],0”; else return “rets”; })

(define_insn “return_ret” [(return) (use (match_operand:SI 0 “const_int_operand” ""))] "" { /* The RETF insn is up to 3 cycles faster than RET. */ fputs ((mn10300_can_use_retf_insn () ? "\tretf " : "\tret "), asm_out_file); mn10300_print_reg_list (asm_out_file, mn10300_get_live_callee_saved_regs (NULL)); fprintf (asm_out_file, “,%d\n”, (int) INTVAL (operands[0])); return ""; })

;; This instruction matches one generated by mn10300_gen_multiple_store() (define_insn “store_movm” [(match_parallel 0 “mn10300_store_multiple_operation” [(set (reg:SI SP_REG) (plus:SI (reg:SI SP_REG) (match_operand 1 "" "“)))])] "" { fputs (”\tmovm ", asm_out_file); mn10300_print_reg_list (asm_out_file, mn10300_store_multiple_regs (operands[0])); fprintf (asm_out_file, “,(sp)\n”); return ""; } ;; Assume that no more than 8 registers will be pushed. [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 99) (const_int 88)))] )

(define_expand “load_pic” [(const_int 0)] “flag_pic” { if (TARGET_AM33) emit_insn (gen_am33_load_pic (pic_offset_table_rtx)); else if (mn10300_frame_size () == 0) emit_insn (gen_mn10300_load_pic0 (pic_offset_table_rtx)); else emit_insn (gen_mn10300_load_pic1 (pic_offset_table_rtx)); DONE; })

(define_insn “am33_load_pic” [(set (match_operand:SI 0 “register_operand” “=a”) (unspec:SI [(const_int 0)] UNSPEC_GOT)) (clobber (reg:CC CC_REG))] “TARGET_AM33” { operands[1] = gen_rtx_SYMBOL_REF (VOIDmode, GOT_SYMBOL_NAME); return “.LPIC%=:;mov pc,%0;add %1-(.LPIC%=-.),%0”; } [(set_attr “timings” “33”)] )

;; Load pic register with push/pop of stack. (define_insn “mn10300_load_pic0” [(set (match_operand:SI 0 “register_operand” “=a”) (unspec:SI [(const_int 0)] UNSPEC_GOT)) (clobber (reg:SI MDR_REG)) (clobber (reg:CC CC_REG))] "" { operands[1] = gen_rtx_SYMBOL_REF (VOIDmode, GOT_SYMBOL_NAME); return (“add -4,sp;” “calls .LPIC%=\n” “.LPIC%=:;” “movm (sp),[%0];” “add %1-(.LPIC%=-.),%0”); } [(set_attr “timings” “88”)] )

;; Load pic register re-using existing stack space. (define_insn “mn10300_load_pic1” [(set (match_operand:SI 0 “register_operand” “=a”) (unspec:SI [(const_int 0)] UNSPEC_GOT)) (clobber (mem:SI (reg:SI SP_REG))) (clobber (reg:SI MDR_REG)) (clobber (reg:CC CC_REG))] "" { operands[1] = gen_rtx_SYMBOL_REF (VOIDmode, GOT_SYMBOL_NAME); return (“calls .LPIC%=\n” “.LPIC%=:;” “mov (sp),%0;” “add %1-(.LPIC%=-.),%0”); } [(set_attr “timings” “66”)] )

;; The mode on operand 3 has been deliberately omitted because it ;; can be either SI (for arithmetic operations) or QI (for shifts). (define_insn “liw” [(set (match_operand:SI 0 “register_operand” “=r”) (unspec:SI [(match_dup 0) (match_operand 2 “liw_operand” “rO”) (match_operand:SI 4 “const_int_operand” "")] UNSPEC_LIW)) (set (match_operand:SI 1 “register_operand” “=r”) (unspec:SI [(match_dup 1) (match_operand 3 “liw_operand” “rO”) (match_operand:SI 5 “const_int_operand” "")] UNSPEC_LIW))] “TARGET_ALLOW_LIW” “%W4_%W5 %2, %0, %3, %1” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 12)))] )

;; The mode on operand 1 has been deliberately omitted because it ;; can be either SI (for arithmetic operations) or QI (for shifts). (define_insn “cmp_liw” [(set (reg:CC CC_REG) (compare:CC (match_operand:SI 2 “register_operand” “r”) (match_operand 3 “liw_operand” “rO”))) (set (match_operand:SI 0 “register_operand” “=r”) (unspec:SI [(match_dup 0) (match_operand 1 “liw_operand” “rO”) (match_operand:SI 4 “const_int_operand” "")] UNSPEC_LIW))] “TARGET_ALLOW_LIW” “cmp_%W4 %3, %2, %1, %0” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 12)))] )

(define_insn “liw_cmp” [(set (match_operand:SI 0 “register_operand” “=r”) (unspec:SI [(match_dup 0) (match_operand 1 “liw_operand” “rO”) (match_operand:SI 4 “const_int_operand” "")] UNSPEC_LIW)) (set (reg:CC CC_REG) (compare:CC (match_operand:SI 2 “register_operand” “r”) (match_operand 3 “liw_operand” “rO”)))] “TARGET_ALLOW_LIW” “%W4_cmp %1, %0, %3, %2” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 13) (const_int 12)))] )

;; Note - in theory the doloop patterns could be used here to express ;; the SETLB and Lcc instructions. In practice this does not work because ;; the acceptable forms of the doloop patterns do not include UNSPECs ;; and without them gcc's basic block reordering code can duplicate the ;; doloop_end pattern, leading to bogus multiple decrements of the loop ;; counter.

(define_insn “setlb” [(unspec [(const_int 0)] UNSPEC_SETLB)] “TARGET_AM33 && TARGET_ALLOW_SETLB” “setlb” )

(define_insn “Lcc” [(set (pc) (if_then_else (match_operator 0 “comparison_operator” [(reg:CC CC_REG) (const_int 0)]) (label_ref (match_operand 1 "" "")) (pc))) (unspec [(const_int 1)] UNSPEC_SETLB)] “TARGET_AM33 && TARGET_ALLOW_SETLB” “L%b0 # loop back to: %1” )

(define_insn “FLcc” [(set (pc) (if_then_else (match_operator 0 “comparison_operator” [(reg:CC_FLOAT CC_REG) (const_int 0)]) (label_ref (match_operand 1 "" "")) (pc))) (unspec [(const_int 2)] UNSPEC_SETLB)] “TARGET_AM33_2 && TARGET_ALLOW_SETLB” “FL%b0 # loop back to: %1” [(set (attr “timings”) (if_then_else (eq_attr “cpu” “am34”) (const_int 44) (const_int 11)))] )