;; Constraint definitions for RS6000 ;; Copyright (C) 2006-2015 Free Software Foundation, Inc. ;; ;; This file is part of GCC. ;; ;; GCC is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 3, or (at your option) ;; any later version. ;; ;; GCC is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details. ;; ;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; http://www.gnu.org/licenses/.
;; Available constraint letters: “e”, “k”, “q”, “u”, “A”, “B”, “C”, “D”
;; Register constraints
(define_register_constraint “f” “rs6000_constraints[RS6000_CONSTRAINT_f]” “@internal”)
(define_register_constraint “d” “rs6000_constraints[RS6000_CONSTRAINT_d]” “@internal”)
(define_register_constraint “b” “BASE_REGS” “@internal”)
(define_register_constraint “h” “SPECIAL_REGS” “@internal”)
(define_register_constraint “c” “CTR_REGS” “@internal”)
(define_register_constraint “l” “LINK_REGS” “@internal”)
(define_register_constraint “v” “ALTIVEC_REGS” “@internal”)
(define_register_constraint “x” “CR0_REGS” “@internal”)
(define_register_constraint “y” “CR_REGS” “@internal”)
(define_register_constraint “z” “CA_REGS” “@internal”)
;; Use w as a prefix to add VSX modes ;; any VSX register (define_register_constraint “wa” “rs6000_constraints[RS6000_CONSTRAINT_wa]” “Any VSX register if the -mvsx option was used or NO_REGS.”)
;; NOTE: For compatibility, “wc” is reserved to represent individual CR bits. ;; It is currently used for that purpose in LLVM.
(define_register_constraint “wd” “rs6000_constraints[RS6000_CONSTRAINT_wd]” “VSX vector register to hold vector double data or NO_REGS.”)
(define_register_constraint “wf” “rs6000_constraints[RS6000_CONSTRAINT_wf]” “VSX vector register to hold vector float data or NO_REGS.”)
(define_register_constraint “wg” “rs6000_constraints[RS6000_CONSTRAINT_wg]” “If -mmfpgpr was used, a floating point register or NO_REGS.”)
(define_register_constraint “wh” “rs6000_constraints[RS6000_CONSTRAINT_wh]” “Floating point register if direct moves are available, or NO_REGS.”)
;; At present, DImode is not allowed in the Altivec registers. If in the ;; future it is allowed, wi/wj can be set to VSX_REGS instead of FLOAT_REGS. (define_register_constraint “wi” “rs6000_constraints[RS6000_CONSTRAINT_wi]” “FP or VSX register to hold 64-bit integers for VSX insns or NO_REGS.”)
(define_register_constraint “wj” “rs6000_constraints[RS6000_CONSTRAINT_wj]” “FP or VSX register to hold 64-bit integers for direct moves or NO_REGS.”)
(define_register_constraint “wk” “rs6000_constraints[RS6000_CONSTRAINT_wk]” “FP or VSX register to hold 64-bit doubles for direct moves or NO_REGS.”)
(define_register_constraint “wl” “rs6000_constraints[RS6000_CONSTRAINT_wl]” “Floating point register if the LFIWAX instruction is enabled or NO_REGS.”)
(define_register_constraint “wm” “rs6000_constraints[RS6000_CONSTRAINT_wm]” “VSX register if direct move instructions are enabled, or NO_REGS.”)
;; NO_REGs register constraint, used to merge mov{sd,sf}, since movsd can use ;; direct move directly, and movsf can't to move between the register sets. ;; There is a mode_attr that resolves to wm for SDmode and wn for SFmode (define_register_constraint “wn” “NO_REGS” “No register (NO_REGS).”)
(define_register_constraint “wr” “rs6000_constraints[RS6000_CONSTRAINT_wr]” “General purpose register if 64-bit instructions are enabled or NO_REGS.”)
(define_register_constraint “ws” “rs6000_constraints[RS6000_CONSTRAINT_ws]” “VSX vector register to hold scalar double values or NO_REGS.”)
(define_register_constraint “wt” “rs6000_constraints[RS6000_CONSTRAINT_wt]” “VSX vector register to hold 128 bit integer or NO_REGS.”)
(define_register_constraint “wu” “rs6000_constraints[RS6000_CONSTRAINT_wu]” “Altivec register to use for float/32-bit int loads/stores or NO_REGS.”)
(define_register_constraint “wv” “rs6000_constraints[RS6000_CONSTRAINT_wv]” “Altivec register to use for double loads/stores or NO_REGS.”)
(define_register_constraint “ww” “rs6000_constraints[RS6000_CONSTRAINT_ww]” “FP or VSX register to perform float operations under -mvsx or NO_REGS.”)
(define_register_constraint “wx” “rs6000_constraints[RS6000_CONSTRAINT_wx]” “Floating point register if the STFIWX instruction is enabled or NO_REGS.”)
(define_register_constraint “wy” “rs6000_constraints[RS6000_CONSTRAINT_wy]” “FP or VSX register to perform ISA 2.07 float ops or NO_REGS.”)
(define_register_constraint “wz” “rs6000_constraints[RS6000_CONSTRAINT_wz]” “Floating point register if the LFIWZX instruction is enabled or NO_REGS.”)
(define_constraint “wD” “Int constant that is the element number of the 64-bit scalar in a vector.” (and (match_code “const_int”) (match_test “TARGET_VSX && (ival == VECTOR_ELEMENT_SCALAR_64BIT)”)))
;; Lq/stq validates the address for load/store quad (define_memory_constraint “wQ” “Memory operand suitable for the load/store quad instructions” (match_operand 0 “quad_memory_operand”))
;; Altivec style load/store that ignores the bottom bits of the address (define_memory_constraint “wZ” “Indexed or indirect memory operand, ignoring the bottom 4 bits” (match_operand 0 “altivec_indexed_or_indirect_operand”))
;; Integer constraints
(define_constraint “I” “A signed 16-bit constant” (and (match_code “const_int”) (match_test “((unsigned HOST_WIDE_INT) ival + 0x8000) < 0x10000”)))
(define_constraint “J” “high-order 16 bits nonzero” (and (match_code “const_int”) (match_test “(ival & (~ (unsigned HOST_WIDE_INT) 0xffff0000)) == 0”)))
(define_constraint “K” “low-order 16 bits nonzero” (and (match_code “const_int”) (match_test “(ival & (~ (HOST_WIDE_INT) 0xffff)) == 0”)))
(define_constraint “L” “signed 16-bit constant shifted left 16 bits” (and (match_code “const_int”) (match_test “((ival & 0xffff) == 0 && (ival >> 31 == -1 || ival >> 31 == 0))”)))
(define_constraint “M” “constant greater than 31” (and (match_code “const_int”) (match_test “ival > 31”)))
(define_constraint “N” “positive constant that is an exact power of two” (and (match_code “const_int”) (match_test “ival > 0 && exact_log2 (ival) >= 0”)))
(define_constraint “O” “constant zero” (and (match_code “const_int”) (match_test “ival == 0”)))
(define_constraint “P” “constant whose negation is signed 16-bit constant” (and (match_code “const_int”) (match_test “((- (unsigned HOST_WIDE_INT) ival) + 0x8000) < 0x10000”)))
;; Floating-point constraints
(define_constraint “G” “Constant that can be copied into GPR with two insns for DF/DI and one for SF.” (and (match_code “const_double”) (match_test “num_insns_constant (op, mode) == (mode == SFmode ? 1 : 2)”)))
(define_constraint “H” “DF/DI constant that takes three insns.” (and (match_code “const_double”) (match_test “num_insns_constant (op, mode) == 3”)))
;; Memory constraints
(define_memory_constraint “es” “A ``stable'' memory operand; that is, one which does not include any automodification of the base register. Unlike @samp{m}, this constraint can be used in @code{asm} statements that might access the operand several times, or that might not access it at all.” (and (match_code “mem”) (match_test “GET_RTX_CLASS (GET_CODE (XEXP (op, 0))) != RTX_AUTOINC”)))
(define_memory_constraint “Q” “Memory operand that is an offset from a register (it is usually better to use @samp{m} or @samp{es} in @code{asm} statements)” (and (match_code “mem”) (match_test “GET_CODE (XEXP (op, 0)) == REG”)))
(define_memory_constraint “Y” “memory operand for 8 byte and 16 byte gpr load/store” (and (match_code “mem”) (match_operand 0 “mem_operand_gpr”)))
(define_memory_constraint “Z” “Memory operand that is an indexed or indirect from a register (it is usually better to use @samp{m} or @samp{es} in @code{asm} statements)” (match_operand 0 “indexed_or_indirect_operand”))
;; Address constraints
(define_address_constraint “a” “Indexed or indirect address operand” (match_operand 0 “indexed_or_indirect_address”))
(define_constraint “R” “AIX TOC entry” (match_test “legitimate_constant_pool_address_p (op, QImode, false)”))
;; General constraints
(define_constraint “S” “Constant that can be placed into a 64-bit mask operand” (and (match_test “TARGET_POWERPC64”) (match_operand 0 “mask64_operand”)))
(define_constraint “T” “Constant that can be placed into a 32-bit mask operand” (match_operand 0 “mask_operand”))
(define_constraint “U” “V.4 small data reference” (and (match_test “DEFAULT_ABI == ABI_V4”) (match_operand 0 “small_data_operand”)))
(define_constraint “t” “AND masks that can be performed by two rldic{l,r} insns (but excluding those that could match other constraints of anddi3)” (and (and (and (match_operand 0 “mask64_2_operand”) (match_test “(fixed_regs[CR0_REGNO] || !logical_operand (op, DImode))”)) (not (match_operand 0 “mask_operand”))) (not (match_operand 0 “mask64_operand”))))
(define_constraint “W” “vector constant that does not require memory” (match_operand 0 “easy_vector_constant”))
(define_constraint “j” “Zero vector constant” (match_test “op == const0_rtx || op == CONST0_RTX (mode)”))