;; GCC machine description for NEC V850 ;; Copyright (C) 1996-2015 Free Software Foundation, Inc. ;; Contributed by Jeff Law (law@cygnus.com).

;; This file is part of GCC.

;; GCC is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 3, or (at your option) ;; any later version.

;; GCC is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; http://www.gnu.org/licenses/.

;; The original PO technology requires these to be ordered by speed, ;; so that assigner will pick the fastest.

;; See file “rtl.def” for documentation on define_insn, match_*, et. al.

;; The V851 manual states that the instruction address space is 16M; ;; the various branch/call instructions only have a 22bit offset (4M range). ;; ;; One day we'll probably need to handle calls to targets more than 4M ;; away.

;; The size of instructions in bytes.

;;--------------------------------------------------------------------------- ;; Constants

;; (define_constants [(ZERO_REGNUM 0) ; constant zero (SP_REGNUM 3) ; Stack Pointer (GP_REGNUM 4) ; GP Pointer (EP_REGNUM 30) ; EP pointer (LP_REGNUM 31) ; Return address register (CC_REGNUM 32) ; Condition code pseudo register (FCC_REGNUM 33) ; Floating Condition code pseudo register (UNSPEC_LOOP 200) ; loop counter ] )

(define_attr “length” "" (const_int 4))

(define_attr “long_calls” “yes,no” (const (if_then_else (symbol_ref “TARGET_LONG_CALLS”) (const_string “yes”) (const_string “no”))))

;; Types of instructions (for scheduling purposes).

(define_attr “type” “load,store,bit1,mult,macc,div,fpu,single,other” (const_string “other”))

(define_attr “cpu” “none,v850,v850e,v850e1,v850e2,v850e2v3,v850e3v5” (cond [(match_test “TARGET_V850”) (const_string “v850”) (match_test “TARGET_V850E”) (const_string “v850e”) (match_test “TARGET_V850E1”) (const_string “v850e1”) (match_test “TARGET_V850E2”) (const_string “v850e2”) (match_test “TARGET_V850E2V3”) (const_string “v850e2v3”) (match_test “TARGET_V850E3V5”) (const_string “v850e3v5”)] (const_string “none”)))

;; Condition code settings. ;; none - insn does not affect cc ;; none_0hit - insn does not affect cc but it does modify operand 0 ;; This attribute is used to keep track of when operand 0 changes. ;; See the description of NOTICE_UPDATE_CC for more info. ;; set_znv - sets z,n,v to usable values; c is unknown. ;; set_zn - sets z,n to usable values; v,c is unknown. ;; compare - compare instruction ;; clobber - value of cc is unknown (define_attr “cc” “none,none_0hit,set_z,set_zn,set_znv,compare,clobber” (const_string “clobber”)) ;; Function units for the V850. As best as I can tell, there's ;; a traditional memory load/use stall as well as a stall if ;; the result of a multiply is used too early.

(define_insn_reservation “v850_other” 1 (eq_attr “type” “other”) “nothing”) (define_insn_reservation “v850_mult” 2 (eq_attr “type” “mult”) “nothing”) (define_insn_reservation “v850_memory” 2 (eq_attr “type” “load”) “nothing”)

(include “predicates.md”) (include “constraints.md”) ;; ---------------------------------------------------------------------- ;; MOVE INSTRUCTIONS ;; ---------------------------------------------------------------------- (define_insn “sign23byte_load” [(set (match_operand:SI 0 “register_operand” “=r”) (sign_extend:SI (mem:QI (plus:SI (match_operand:SI 1 “register_operand” “r”) (match_operand 2 “disp23_operand” “W”)))))] “TARGET_V850E2V3_UP” “ld.b %2[%1],%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”)])

(define_insn “unsign23byte_load” [(set (match_operand:SI 0 “register_operand” “=r”) (zero_extend:SI (mem:QI (plus:SI (match_operand:SI 1 “register_operand” “r”) (match_operand 2 “disp23_operand” “W”)))))] “TARGET_V850E2V3_UP” “ld.bu %2[%1],%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”)])

(define_insn “sign23hword_load” [(set (match_operand:SI 0 “register_operand” “=r”) (sign_extend:SI (mem:HI (plus:SI (match_operand:SI 1 “register_operand” “r”) (match_operand 2 “disp23_operand” “W”)))))] “TARGET_V850E2V3_UP” “ld.h %2[%1],%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”)])

(define_insn “unsign23hword_load” [(set (match_operand:SI 0 “register_operand” “=r”) (zero_extend:SI (mem:HI (plus:SI (match_operand:SI 1 “register_operand” “r”) (match_operand 2 “disp23_operand” “W”)))))] “TARGET_V850E2V3_UP” “ld.hu %2[%1],%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”)])

(define_insn “23word_load” [(set (match_operand:SI 0 “register_operand” “=r”) (mem:SI (plus:SI (match_operand:SI 1 “register_operand” “r”) (match_operand 2 “disp23_operand” “W”))))] “TARGET_V850E2V3_UP” “ld.w %2[%1],%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”)])

(define_insn “23byte_store” [(set (mem:QI (plus:SI (match_operand:SI 0 “register_operand” “r”) (match_operand 1 “disp23_operand” “W”))) (match_operand:QI 2 “register_operand” “r”))] “TARGET_V850E2V3_UP” “st.b %2,%1[%0]” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”)])

(define_insn “23hword_store” [(set (mem:HI (plus:SI (match_operand:SI 0 “register_operand” “r”) (match_operand 1 “disp23_operand” “W”))) (match_operand:HI 2 “register_operand” “r”))] “TARGET_V850E2V3_UP” “st.h %2,%1[%0]” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”)])

(define_insn “23word_store” [(set (mem:SI (plus:SI (match_operand:SI 0 “register_operand” “r”) (match_operand 1 “disp23_operand” “W”))) (match_operand:SI 2 “register_operand” “r”))] “TARGET_V850E2V3_UP” “st.w %2,%1[%0]” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”)])

;; movdi

(define_expand “movdi” [(set (match_operand:DI 0 “general_operand”) (match_operand:DI 1 “general_operand”))] “TARGET_V850E3V5_UP” { /* One of the ops has to be in a register or 0. */ if (!register_operand (operand0, DImode) && !register_operand (operand1, DImode)) operands[1] = copy_to_mode_reg (DImode, operand1);

if (register_operand (operand0, DImode)
&& (CONST_INT_P (operands[1]) || CONST_DOUBLE_P (operands[1])))
  {
    int i;

    for (i = 0; i < UNITS_PER_WORD * 2; i += UNITS_PER_WORD)
      emit_move_insn (simplify_gen_subreg (SImode, operands[0], DImode, i),
                      simplify_gen_subreg (SImode, operands[1], DImode, i));
    DONE;
  }

} )

(define_insn “*movdi_internal” [(set (match_operand:DI 0 “nonimmediate_operand” “=r,e!r,m”) (match_operand:DI 1 “nonimmediate_operand” “r,m,e!r”))] “TARGET_V850E3V5_UP || (register_operand (operands[0], DImode) && register_operand (operands[1], DImode))” { return v850_gen_movdi (operands); } [(set_attr “length” “4,12,12”) (set_attr “cc” “none_0hit”) (set_attr “type” “other,load,store”)] )

;; movqi

(define_expand “movqi” [(set (match_operand:QI 0 “general_operand” "") (match_operand:QI 1 “general_operand” ""))] "" { /* One of the ops has to be in a register or 0 */ if (!register_operand (operand0, QImode) && !reg_or_0_operand (operand1, QImode)) operands[1] = copy_to_mode_reg (QImode, operand1); })

(define_insn “*movqi_internal” [(set (match_operand:QI 0 “nonimmediate_operand” “=r,r,r,Q,r,m,m”) (match_operand:QI 1 “general_operand” “Jr,n,Q,Ir,m,r,I”))] “register_operand (operands[0], QImode) || reg_or_0_operand (operands[1], QImode)” { return output_move_single (operands); } [(set_attr “length” “2,4,2,2,4,4,4”) (set_attr “cc” “none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit”) (set_attr “type” “other,other,load,other,load,store,store”)])

;; movhi

(define_expand “movhi” [(set (match_operand:HI 0 “general_operand” "") (match_operand:HI 1 “general_operand” ""))] "" { /* One of the ops has to be in a register or 0 */ if (!register_operand (operand0, HImode) && !reg_or_0_operand (operand1, HImode)) operands[1] = copy_to_mode_reg (HImode, operand1); })

(define_insn “*movhi_internal” [(set (match_operand:HI 0 “nonimmediate_operand” “=r,r,r,Q,r,m,m”) (match_operand:HI 1 “general_operand” “Jr,n,Q,Ir,m,r,I”))] “register_operand (operands[0], HImode) || reg_or_0_operand (operands[1], HImode)” { return output_move_single (operands); } [(set_attr “length” “2,4,2,2,4,4,4”) (set_attr “cc” “none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit”) (set_attr “type” “other,other,load,other,load,store,store”)])

;; movsi and helpers

(define_insn “*movsi_high” [(set (match_operand:SI 0 “register_operand” “=r”) (high:SI (match_operand 1 “immediate_operand” “i”)))] "" “movhi hi(%1),%.,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “other”)])

(define_insn “*movsi_lo” [(set (match_operand:SI 0 “register_operand” “=r”) (lo_sum:SI (match_operand:SI 1 “register_operand” “r”) (match_operand:SI 2 “immediate_operand” “i”)))] "" “movea lo(%2),%1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “other”)])

(define_expand “movsi” [(set (match_operand:SI 0 “general_operand” "") (match_operand:SI 1 “general_operand” ""))] "" { /* One of the ops has to be in a register or 0 */ if (!register_operand (operand0, SImode) && !reg_or_0_operand (operand1, SImode)) operands[1] = copy_to_mode_reg (SImode, operand1);

/* Some constants, as well as symbolic operands
   must be done with HIGH & LO_SUM patterns.  */
if (CONSTANT_P (operands[1])	
&& GET_CODE (operands[1]) != HIGH
&& ! (TARGET_V850E_UP)
&& !special_symbolref_operand (operands[1], VOIDmode)
&& !(GET_CODE (operands[1]) == CONST_INT
     && (CONST_OK_FOR_J (INTVAL (operands[1]))
	 || CONST_OK_FOR_K (INTVAL (operands[1]))
	 || CONST_OK_FOR_L (INTVAL (operands[1])))))
  {
rtx temp;

if (reload_in_progress || reload_completed)
      temp = operands[0];
else
  temp = gen_reg_rtx (SImode);

emit_insn (gen_rtx_SET (SImode, temp,
			gen_rtx_HIGH (SImode, operand1)));
emit_insn (gen_rtx_SET (SImode, operand0,
			gen_rtx_LO_SUM (SImode, temp, operand1)));
DONE;
  }

})

;; This is the same as the following pattern, except that it includes ;; support for arbitrary 32-bit immediates.

;; ??? This always loads addresses using hilo. If the only use of this address ;; was in a load/store, then we would get smaller code if we only loaded the ;; upper part with hi, and then put the lower part in the load/store insn.

(define_insn “*movsi_internal_v850e” [(set (match_operand:SI 0 “nonimmediate_operand” “=r,r,r,r,Q,r,r,m,m,r”) (match_operand:SI 1 “general_operand” “Jr,K,L,Q,Ir,m,R,r,I,i”))] “(TARGET_V850E_UP) && (register_operand (operands[0], SImode) || reg_or_0_operand (operands[1], SImode))” { return output_move_single (operands); } [(set_attr “length” “2,4,4,2,2,4,4,4,4,6”) (set_attr “cc” “none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit”) (set_attr “type” “other,other,other,load,other,load,other,store,store,other”)])

(define_insn “*movsi_internal” [(set (match_operand:SI 0 “nonimmediate_operand” “=r,r,r,r,Q,r,r,m,m”) (match_operand:SI 1 “movsi_source_operand” “Jr,K,L,Q,Ir,m,R,r,I”))] “register_operand (operands[0], SImode) || reg_or_0_operand (operands[1], SImode)” { return output_move_single (operands); } [(set_attr “length” “2,4,4,2,2,4,4,4,4”) (set_attr “cc” “none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit”) (set_attr “type” “other,other,other,load,other,load,store,store,other”)])

(define_insn “*movsf_internal” [(set (match_operand:SF 0 “nonimmediate_operand” “=r,r,r,r,r,Q,r,m,m,r”) (match_operand:SF 1 “general_operand” “Jr,K,L,n,Q,Ir,m,r,IG,iF”))] “register_operand (operands[0], SFmode) || reg_or_0_operand (operands[1], SFmode)” { return output_move_single (operands); } [(set_attr “length” “2,4,4,8,2,2,4,4,4,8”) (set_attr “cc” “none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit,none_0hit”) (set_attr “type” “other,other,other,other,load,other,load,store,store,other”)])

;; ---------------------------------------------------------------------- ;; TEST INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “*v850_tst1” [(set (cc0) (compare (zero_extract:SI (match_operand:QI 0 “memory_operand” “m”) (const_int 1) (match_operand:QI 1 “const_int_operand” “n”)) (const_int 0)))] "" “tst1 %1,%0” [(set_attr “length” “4”) (set_attr “cc” “clobber”)])

;; This replaces ld.b;sar;andi with tst1;setf nz.

(define_split [(set (match_operand:SI 0 “register_operand” "") (compare (zero_extract:SI (match_operand:QI 1 “memory_operand” "") (const_int 1) (match_operand 2 “const_int_operand” "")) (const_int 0)))] "" [(set (cc0) (compare (zero_extract:SI (match_dup 1) (const_int 1) (match_dup 2)) (const_int 0))) (set (match_dup 0) (ne:SI (cc0) (const_int 0)))])

(define_expand “cbranchsi4” [(set (cc0) (compare (match_operand:SI 1 “register_operand” "") (match_operand:SI 2 “reg_or_int5_operand” ""))) (set (pc) (if_then_else (match_operator 0 “ordered_comparison_operator” [(cc0) (const_int 0)]) (label_ref (match_operand 3 "" "")) (pc)))] "")

(define_expand “cstoresi4” [(set (cc0) (compare (match_operand:SI 2 “register_operand” "") (match_operand:SI 3 “reg_or_int5_operand” ""))) (set (match_operand:SI 0 “register_operand”) (match_operator:SI 1 “ordered_comparison_operator” [(cc0) (const_int 0)]))] "")

(define_expand “cmpsi” [(set (cc0) (compare (match_operand:SI 0 “register_operand” “r,r”) (match_operand:SI 1 “reg_or_int5_operand” “r,J”)))] "" { v850_compare_op0 = operands[0]; v850_compare_op1 = operands[1]; DONE; })

(define_insn “cmpsi_insn” [(set (cc0) (compare (match_operand:SI 0 “register_operand” “r,r”) (match_operand:SI 1 “reg_or_int5_operand” “r,J”)))] "" “@ cmp %1,%0 cmp %1,%0” [(set_attr “length” “2,2”) (set_attr “cc” “compare”)])

(define_expand “cbranchsf4” [(set (pc) (if_then_else (match_operator 0 “ordered_comparison_operator” [(match_operand:SF 1 “register_operand”) (match_operand:SF 2 “register_operand”)]) (label_ref (match_operand 3 "")) (pc))) (clobber (cc0))] “TARGET_USE_FPU” { enum rtx_code cond = GET_CODE (operands[0]); machine_mode mode; rtx fcc_reg; rtx cc_reg; rtx tmp;

v850_compare_op0 = operands[1]; v850_compare_op1 = operands[2];

if (GET_MODE_CLASS (GET_MODE (v850_compare_op0)) != MODE_FLOAT) FAIL;

mode = v850_gen_float_compare (cond, VOIDmode, v850_compare_op0, v850_compare_op1); fcc_reg = gen_rtx_REG (mode, FCC_REGNUM); cc_reg = gen_rtx_REG (mode, CC_REGNUM); emit_insn(gen_rtx_SET (mode, cc_reg, fcc_reg)); tmp = gen_rtx_fmt_ee (cond, mode, cc_reg, const0_rtx); tmp = gen_rtx_IF_THEN_ELSE (VOIDmode, tmp, gen_rtx_LABEL_REF (VOIDmode, operands[3]), pc_rtx); emit_jump_insn (gen_rtx_SET (VOIDmode, pc_rtx, tmp)); DONE; })

(define_insn “cstoresf4” [(set (match_operand:SI 0 “register_operand” “=r”) (match_operator:SI 1 “ordered_comparison_operator” [(match_operand:SF 2 “register_operand” “r”) (match_operand:SF 3 “register_operand” “r”)]))] “TARGET_USE_FPU” { if (GET_CODE (operands[1]) == GT || GET_CODE (operands[1]) == GE) return “cmpf.s %c1, %z2, %z3 ; trfsr ; setf nz, %0”; if (GET_CODE (operands[1]) == LT || GET_CODE (operands[1]) == LE) return “cmpf.s %c1, %z2, %z3 ; trfsr ; setf z, %0”; if (GET_CODE (operands[1]) == EQ) return “cmpf.s eq, %z2, %z3 ; trfsr ; setf z, %0”; if (GET_CODE (operands[1]) == NE) return “cmpf.s neq, %z2, %z3 ; trfsr ; setf nz, %0”; gcc_unreachable (); } [(set_attr “length” “12”) (set_attr “type” “fpu”)] )

(define_expand “cbranchdf4” [(set (pc) (if_then_else (match_operator 0 “ordered_comparison_operator” [(match_operand:DF 1 “even_reg_operand”) (match_operand:DF 2 “even_reg_operand”)]) (label_ref (match_operand 3 "")) (pc))) (clobber (cc0))] “TARGET_USE_FPU” { enum rtx_code cond = GET_CODE (operands[0]); machine_mode mode; rtx fcc_reg; rtx cc_reg; rtx tmp;

v850_compare_op0 = operands[1];
v850_compare_op1 = operands[2];

if (GET_MODE_CLASS (GET_MODE (v850_compare_op0)) != MODE_FLOAT) FAIL;

mode = v850_gen_float_compare (cond, VOIDmode, v850_compare_op0, v850_compare_op1); fcc_reg = gen_rtx_REG (mode, FCC_REGNUM); cc_reg = gen_rtx_REG (mode, CC_REGNUM); emit_insn(gen_rtx_SET (mode, cc_reg, fcc_reg)); tmp = gen_rtx_fmt_ee (cond, mode, cc_reg, const0_rtx); tmp = gen_rtx_IF_THEN_ELSE (VOIDmode, tmp, gen_rtx_LABEL_REF (VOIDmode, operands[3]), pc_rtx); emit_jump_insn (gen_rtx_SET (VOIDmode, pc_rtx, tmp)); DONE; })

(define_insn “cstoredf4” [(set (match_operand:SI 0 “register_operand” “=r”) (match_operator:SI 1 “ordered_comparison_operator” [(match_operand:DF 2 “even_reg_operand” “r”) (match_operand:DF 3 “even_reg_operand” “r”)]))] “TARGET_USE_FPU” { if (GET_CODE (operands[1]) == GT || GET_CODE (operands[1]) == GE) return “cmpf.d %c1, %z2, %z3 ; trfsr ; setf nz, %0”; if (GET_CODE (operands[1]) == LT || GET_CODE (operands[1]) == LE) return “cmpf.d %c1, %z2, %z3 ; trfsr ; setf z, %0”; if (GET_CODE (operands[1]) == EQ) return “cmpf.d eq, %z2, %z3 ; trfsr ; setf z ,%0”; if (GET_CODE (operands[1]) == NE) return “cmpf.d neq, %z2, %z3 ; trfsr ; setf nz, %0”; gcc_unreachable (); } [(set_attr “length” “12”) (set_attr “type” “fpu”)] )

(define_expand “cmpsf” [(set (reg:CC CC_REGNUM) (compare (match_operand:SF 0 “register_operand” “r”) (match_operand:SF 1 “register_operand” “r”)))] “TARGET_USE_FPU” { v850_compare_op0 = operands[0]; v850_compare_op1 = operands[1]; DONE; })

(define_expand “cmpdf” [(set (reg:CC CC_REGNUM) (compare (match_operand:DF 0 “even_reg_operand” “r”) (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” { v850_compare_op0 = operands[0]; v850_compare_op1 = operands[1]; DONE; })

;; ---------------------------------------------------------------------- ;; ADD INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “addsi3” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (plus:SI (match_operand:SI 1 “register_operand” “%0,r,r”) (match_operand:SI 2 “nonmemory_operand” “rJ,K,U”))) (clobber (reg:CC CC_REGNUM))]

"" “@ add %2,%0 addi %2,%1,%0 addi %O2(%P2),%1,%0” [(set_attr “length” “2,4,4”) (set_attr “cc” “set_zn,set_zn,set_zn”)])

;; ---------------------------------------------------------------------- ;; SUBTRACT INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “subsi3” [(set (match_operand:SI 0 “register_operand” “=r,r”) (minus:SI (match_operand:SI 1 “register_operand” “0,r”) (match_operand:SI 2 “register_operand” “r,0”))) (clobber (reg:CC CC_REGNUM))] "" “@ sub %2,%0 subr %1,%0” [(set_attr “length” “2,2”) (set_attr “cc” “set_zn,set_zn”)])

(define_insn “negsi2” [(set (match_operand:SI 0 “register_operand” “=r”) (neg:SI (match_operand:SI 1 “register_operand” “0”))) (clobber (reg:CC CC_REGNUM))] "" “subr %.,%0” [(set_attr “length” “2”) (set_attr “cc” “set_zn”)])

;; ---------------------------------------------------------------------- ;; MULTIPLY INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_expand “mulhisi3” [(set (match_operand:SI 0 “register_operand” "") (mult:SI (sign_extend:SI (match_operand:HI 1 “register_operand” "")) (sign_extend:SI (match_operand:HI 2 “nonmemory_operand” ""))))] "" { if (GET_CODE (operands[2]) == CONST_INT) { emit_insn (gen_mulhisi3_internal2 (operands[0], operands[1], operands[2])); DONE; } })

(define_insn “*mulhisi3_internal1” [(set (match_operand:SI 0 “register_operand” “=r”) (mult:SI (sign_extend:SI (match_operand:HI 1 “register_operand” “%0”)) (sign_extend:SI (match_operand:HI 2 “register_operand” “r”))))] "" “mulh %2,%0” [(set_attr “length” “2”) (set_attr “cc” “none_0hit”) (set_attr “type” “mult”)])

(define_insn “mulhisi3_internal2” [(set (match_operand:SI 0 “register_operand” “=r,r”) (mult:SI (sign_extend:SI (match_operand:HI 1 “register_operand” “%0,r”)) (match_operand:HI 2 “const_int_operand” “J,K”)))] "" “@ mulh %2,%0 mulhi %2,%1,%0” [(set_attr “length” “2,4”) (set_attr “cc” “none_0hit,none_0hit”) (set_attr “type” “mult”)])

;; ??? The scheduling info is probably wrong.

;; ??? This instruction can also generate the 32-bit highpart, but using it ;; may increase code size counter to the desired result.

;; ??? This instructions can also give a DImode result.

;; ??? There is unsigned version, but it matters only for the DImode/highpart ;; results.

(define_insn “mulsi3” [(set (match_operand:SI 0 “register_operand” “=r”) (mult:SI (match_operand:SI 1 “register_operand” “%0”) (match_operand:SI 2 “reg_or_int9_operand” “rO”)))] “(TARGET_V850E_UP)” “mul %2,%1,%.” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “mult”)])

;; ---------------------------------------------------------------------- ;; DIVIDE INSTRUCTIONS ;; ----------------------------------------------------------------------

;; ??? These insns do set the Z/N condition codes, except that they are based ;; on only one of the two results, so it doesn't seem to make sense to use ;; them.

;; ??? The scheduling info is probably wrong.

(define_insn “divmodsi4” [(set (match_operand:SI 0 “register_operand” “=r”) (div:SI (match_operand:SI 1 “register_operand” “0”) (match_operand:SI 2 “register_operand” “r”))) (set (match_operand:SI 3 “register_operand” “=r”) (mod:SI (match_dup 1) (match_dup 2))) (clobber (reg:CC CC_REGNUM))] “TARGET_V850E_UP” { if (TARGET_V850E2_UP) return “divq %2,%0,%3”; else return “div %2,%0,%3”; } [(set_attr “length” “4”) (set_attr “cc” “clobber”) (set_attr “type” “div”)])

(define_insn “udivmodsi4” [(set (match_operand:SI 0 “register_operand” “=r”) (udiv:SI (match_operand:SI 1 “register_operand” “0”) (match_operand:SI 2 “register_operand” “r”))) (set (match_operand:SI 3 “register_operand” “=r”) (umod:SI (match_dup 1) (match_dup 2))) (clobber (reg:CC CC_REGNUM))] “TARGET_V850E_UP” { if (TARGET_V850E2_UP) return “divqu %2,%0,%3”; else return “divu %2,%0,%3”; } [(set_attr “length” “4”) (set_attr “cc” “clobber”) (set_attr “type” “div”)])

;; ??? There is a 2 byte instruction for generating only the quotient. ;; However, it isn't clear how to compute the length field correctly.

(define_insn “divmodhi4” [(set (match_operand:HI 0 “register_operand” “=r”) (div:HI (match_operand:HI 1 “register_operand” “0”) (match_operand:HI 2 “register_operand” “r”))) (set (match_operand:HI 3 “register_operand” “=r”) (mod:HI (match_dup 1) (match_dup 2))) (clobber (reg:CC CC_REGNUM))] “TARGET_V850E_UP” “divh %2,%0,%3” [(set_attr “length” “4”) (set_attr “cc” “clobber”) (set_attr “type” “div”)])

;; Half-words are sign-extended by default, so we must zero extend to a word ;; here before doing the divide.

(define_insn “udivmodhi4” [(set (match_operand:HI 0 “register_operand” “=r”) (udiv:HI (match_operand:HI 1 “register_operand” “0”) (match_operand:HI 2 “register_operand” “r”))) (set (match_operand:HI 3 “register_operand” “=r”) (umod:HI (match_dup 1) (match_dup 2))) (clobber (reg:CC CC_REGNUM))] “TARGET_V850E_UP” “zxh %0 ; divhu %2,%0,%3” [(set_attr “length” “4”) (set_attr “cc” “clobber”) (set_attr “type” “div”)]) ;; ---------------------------------------------------------------------- ;; AND INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “*v850_clr1_1” [(set (match_operand:QI 0 “memory_operand” “=m”) (subreg:QI (and:SI (subreg:SI (match_dup 0) 0) (match_operand:QI 1 “not_power_of_two_operand” "")) 0)) (clobber (reg:CC CC_REGNUM))] "" { rtx xoperands[2]; xoperands[0] = operands[0]; xoperands[1] = GEN_INT (~INTVAL (operands[1]) & 0xff); output_asm_insn (“clr1 %M1,%0”, xoperands); return ""; } [(set_attr “length” “4”) (set_attr “cc” “clobber”) (set_attr “type” “bit1”)])

(define_insn “*v850_clr1_2” [(set (match_operand:HI 0 “indirect_operand” “=m”) (subreg:HI (and:SI (subreg:SI (match_dup 0) 0) (match_operand:HI 1 “not_power_of_two_operand” "")) 0)) (clobber (reg:CC CC_REGNUM))] "" { int log2 = exact_log2 (~INTVAL (operands[1]) & 0xffff);

rtx xoperands[2]; xoperands[0] = gen_rtx_MEM (QImode, plus_constant (Pmode, XEXP (operands[0], 0), log2 / 8)); xoperands[1] = GEN_INT (log2 % 8); output_asm_insn (“clr1 %1,%0”, xoperands); return ""; } [(set_attr “length” “4”) (set_attr “cc” “clobber”) (set_attr “type” “bit1”)])

(define_insn “*v850_clr1_3” [(set (match_operand:SI 0 “indirect_operand” “=m”) (and:SI (match_dup 0) (match_operand:SI 1 “not_power_of_two_operand” ""))) (clobber (reg:CC CC_REGNUM))] "" { int log2 = exact_log2 (~INTVAL (operands[1]) & 0xffffffff);

rtx xoperands[2]; xoperands[0] = gen_rtx_MEM (QImode, plus_constant (Pmode, XEXP (operands[0], 0), log2 / 8)); xoperands[1] = GEN_INT (log2 % 8); output_asm_insn (“clr1 %1,%0”, xoperands); return ""; } [(set_attr “length” “4”) (set_attr “cc” “clobber”) (set_attr “type” “bit1”)])

(define_insn “andsi3” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (and:SI (match_operand:SI 1 “register_operand” “%0,0,r”) (match_operand:SI 2 “nonmemory_operand” “r,I,M”))) (clobber (reg:CC CC_REGNUM))] "" “@ and %2,%0 and %.,%0 andi %2,%1,%0” [(set_attr “length” “2,2,4”) (set_attr “cc” “set_zn”)])

;; ---------------------------------------------------------------------- ;; OR INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “*v850_set1_1” [(set (match_operand:QI 0 “memory_operand” “=m”) (subreg:QI (ior:SI (subreg:SI (match_dup 0) 0) (match_operand 1 “power_of_two_operand” "")) 0)) (clobber (reg:CC CC_REGNUM))] "" “set1 %M1,%0” [(set_attr “length” “4”) (set_attr “cc” “clobber”) (set_attr “type” “bit1”)])

(define_insn “*v850_set1_2” [(set (match_operand:HI 0 “indirect_operand” “=m”) (subreg:HI (ior:SI (subreg:SI (match_dup 0) 0) (match_operand 1 “power_of_two_operand” "")) 0))] "" { int log2 = exact_log2 (INTVAL (operands[1]));

if (log2 < 8) return “set1 %M1,%0”; else { rtx xoperands[2]; xoperands[0] = gen_rtx_MEM (QImode, plus_constant (Pmode, XEXP (operands[0], 0), log2 / 8)); xoperands[1] = GEN_INT (log2 % 8); output_asm_insn (“set1 %1,%0”, xoperands); } return ""; } [(set_attr “length” “4”) (set_attr “cc” “clobber”) (set_attr “type” “bit1”)])

(define_insn “*v850_set1_3” [(set (match_operand:SI 0 “indirect_operand” “=m”) (ior:SI (match_dup 0) (match_operand 1 “power_of_two_operand” ""))) (clobber (reg:CC CC_REGNUM))] "" { int log2 = exact_log2 (INTVAL (operands[1]));

if (log2 < 8) return “set1 %M1,%0”; else { rtx xoperands[2]; xoperands[0] = gen_rtx_MEM (QImode, plus_constant (Pmode, XEXP (operands[0], 0), log2 / 8)); xoperands[1] = GEN_INT (log2 % 8); output_asm_insn (“set1 %1,%0”, xoperands); } return ""; } [(set_attr “length” “4”) (set_attr “cc” “clobber”) (set_attr “type” “bit1”)])

(define_insn “iorsi3” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (ior:SI (match_operand:SI 1 “register_operand” “%0,0,r”) (match_operand:SI 2 “nonmemory_operand” “r,I,M”))) (clobber (reg:CC CC_REGNUM))] "" “@ or %2,%0 or %.,%0 ori %2,%1,%0” [(set_attr “length” “2,2,4”) (set_attr “cc” “set_zn”)])

;; ---------------------------------------------------------------------- ;; XOR INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “*v850_not1_1” [(set (match_operand:QI 0 “memory_operand” “=m”) (subreg:QI (xor:SI (subreg:SI (match_dup 0) 0) (match_operand 1 “power_of_two_operand” "")) 0)) (clobber (reg:CC CC_REGNUM))] "" “not1 %M1,%0” [(set_attr “length” “4”) (set_attr “cc” “clobber”) (set_attr “type” “bit1”)])

(define_insn “*v850_not1_2” [(set (match_operand:HI 0 “indirect_operand” “=m”) (subreg:HI (xor:SI (subreg:SI (match_dup 0) 0) (match_operand 1 “power_of_two_operand” "")) 0))] "" { int log2 = exact_log2 (INTVAL (operands[1]));

if (log2 < 8) return “not1 %M1,%0”; else { rtx xoperands[2]; xoperands[0] = gen_rtx_MEM (QImode, plus_constant (Pmode, XEXP (operands[0], 0), log2 / 8)); xoperands[1] = GEN_INT (log2 % 8); output_asm_insn (“not1 %1,%0”, xoperands); } return ""; } [(set_attr “length” “4”) (set_attr “cc” “clobber”) (set_attr “type” “bit1”)])

(define_insn “*v850_not1_3” [(set (match_operand:SI 0 “indirect_operand” “=m”) (xor:SI (match_dup 0) (match_operand 1 “power_of_two_operand” ""))) (clobber (reg:CC CC_REGNUM))] "" { int log2 = exact_log2 (INTVAL (operands[1]));

if (log2 < 8) return “not1 %M1,%0”; else { rtx xoperands[2]; xoperands[0] = gen_rtx_MEM (QImode, plus_constant (Pmode, XEXP (operands[0], 0), log2 / 8)); xoperands[1] = GEN_INT (log2 % 8); output_asm_insn (“not1 %1,%0”, xoperands); } return ""; } [(set_attr “length” “4”) (set_attr “cc” “clobber”) (set_attr “type” “bit1”)])

(define_insn “xorsi3” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (xor:SI (match_operand:SI 1 “register_operand” “%0,0,r”) (match_operand:SI 2 “nonmemory_operand” “r,I,M”))) (clobber (reg:CC CC_REGNUM))] "" “@ xor %2,%0 xor %.,%0 xori %2,%1,%0” [(set_attr “length” “2,2,4”) (set_attr “cc” “set_zn”)]) ;; ---------------------------------------------------------------------- ;; NOT INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “one_cmplsi2” [(set (match_operand:SI 0 “register_operand” “=r”) (not:SI (match_operand:SI 1 “register_operand” “r”))) (clobber (reg:CC CC_REGNUM))] "" “not %1,%0” [(set_attr “length” “2”) (set_attr “cc” “set_zn”)])

;; ----------------------------------------------------------------- ;; BIT FIELDS ;; -----------------------------------------------------------------

;; ??? Is it worth defining insv and extv for the V850 series?!?

;; An insv pattern would be useful, but does not get used because ;; store_bit_field never calls insv when storing a constant value into a ;; single-bit bitfield.

;; extv/extzv patterns would be useful, but do not get used because ;; optimize_bitfield_compare in fold-const usually converts single ;; bit extracts into an AND with a mask.

(define_insn “insv” [(set (zero_extract:SI (match_operand:SI 0 “register_operand” “+r”) (match_operand:SI 1 “immediate_operand” “n”) (match_operand:SI 2 “immediate_operand” “n”)) (match_operand:SI 3 “register_operand” “r”))] “TARGET_V850E3V5_UP” “bins %3, %2, %1, %0” [(set_attr “length” “4”) (set_attr “cc” “set_zn”)] )

;; ----------------------------------------------------------------- ;; Scc INSTRUCTIONS ;; -----------------------------------------------------------------

(define_insn “*setcc” [(set (match_operand:SI 0 “register_operand” “=r”) (match_operator:SI 1 “comparison_operator” [(cc0) (const_int 0)]))] "" { if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0 && (GET_CODE (operands[1]) == GT || GET_CODE (operands[1]) == GE || GET_CODE (operands[1]) == LE || GET_CODE (operands[1]) == LT)) return 0;

return “setf %c1,%0”; } [(set_attr “length” “4”) (set_attr “cc” “none_0hit”)])

(define_insn “setf_insn” [(set (match_operand:SI 0 “register_operand” “=r”) (match_operator:SI 1 “comparison_operator” [(reg:CC CC_REGNUM) (const_int 0)]))] "" “setf %b1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”)])

(define_insn “set_z_insn” [(set (match_operand:SI 0 “register_operand” “=r”) (match_operand 1 “v850_float_z_comparison_operator” ""))] “TARGET_V850E2V3_UP” “setf z,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”)])

(define_insn “set_nz_insn” [(set (match_operand:SI 0 “register_operand” “=r”) (match_operand 1 “v850_float_nz_comparison_operator” ""))] “TARGET_V850E2V3_UP” “setf nz,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”)])

;; ---------------------------------------------------------------------- ;; CONDITIONAL MOVE INSTRUCTIONS ;; ----------------------------------------------------------------------

;; Instructions using cc0 aren't allowed to have input reloads, so we must ;; hide the fact that this instruction uses cc0. We do so by including the ;; compare instruction inside it.

(define_expand “movsicc” [(set (match_operand:SI 0 “register_operand” “=r”) (if_then_else:SI (match_operand 1 “comparison_operator”) (match_operand:SI 2 “reg_or_const_operand” “rJ”) (match_operand:SI 3 “reg_or_const_operand” “rI”)))] “(TARGET_V850E_UP)” { /* Make sure that we have an integer comparison... */ if (GET_MODE (XEXP (operands[1], 0)) != CCmode && GET_MODE (XEXP (operands[1], 0)) != SImode) FAIL;

if ((GET_CODE (operands[2]) == CONST_INT
&& GET_CODE (operands[3]) == CONST_INT))
  {
int o2 = INTVAL (operands[2]);
int o3 = INTVAL (operands[3]);

if (o2 == 1 && o3 == 0)
  FAIL;   /* setf */
if (o3 == 1 && o2 == 0)
  FAIL;   /* setf */
if (o2 == 0 && (o3 < -16 || o3 > 15) && exact_log2 (o3) >= 0)
  FAIL;   /* setf + shift */
if (o3 == 0 && (o2 < -16 || o2 > 15) && exact_log2 (o2) >=0)
  FAIL;   /* setf + shift */
if (o2 != 0)
  operands[2] = copy_to_mode_reg (SImode, operands[2]);
if (o3 !=0 )
  operands[3] = copy_to_mode_reg (SImode, operands[3]);
  }
else
  {
if (GET_CODE (operands[2]) != REG)
  operands[2] = copy_to_mode_reg (SImode,operands[2]);
if (GET_CODE (operands[3]) != REG)
  operands[3] = copy_to_mode_reg (SImode, operands[3]);
  }

})

;; ??? Clobbering the condition codes is overkill.

;; ??? We sometimes emit an unnecessary compare instruction because the ;; condition codes may have already been set by an earlier instruction, ;; but we have no code here to avoid the compare if it is unnecessary.

(define_insn “movsicc_normal_cc” [(set (match_operand:SI 0 “register_operand” “=r”) (if_then_else:SI (match_operator 1 “comparison_operator” [(reg:CC CC_REGNUM) (const_int 0)]) (match_operand:SI 2 “reg_or_int5_operand” “rJ”) (match_operand:SI 3 “reg_or_0_operand” “rI”)))] “(TARGET_V850E_UP)” “cmov %c1,%2,%z3,%0”; [(set_attr “length” “6”) (set_attr “cc” “compare”)])

(define_insn “movsicc_reversed_cc” [(set (match_operand:SI 0 “register_operand” “=r”) (if_then_else:SI (match_operator 1 “comparison_operator” [(reg:CC CC_REGNUM) (const_int 0)]) (match_operand:SI 2 “reg_or_0_operand” “rI”) (match_operand:SI 3 “reg_or_int5_operand” “rJ”)))] “(TARGET_V850E_UP)” “cmov %C1,%3,%z2,%0” [(set_attr “length” “6”) (set_attr “cc” “compare”)])

(define_insn “*movsicc_normal” [(set (match_operand:SI 0 “register_operand” “=r”) (if_then_else:SI (match_operator 1 “comparison_operator” [(match_operand:SI 4 “register_operand” “r”) (match_operand:SI 5 “reg_or_int5_operand” “rJ”)]) (match_operand:SI 2 “reg_or_int5_operand” “rJ”) (match_operand:SI 3 “reg_or_0_operand” “rI”)))] “(TARGET_V850E_UP)” “cmp %5,%4 ; cmov %c1,%2,%z3,%0” [(set_attr “length” “6”) (set_attr “cc” “clobber”)])

(define_insn “*movsicc_reversed” [(set (match_operand:SI 0 “register_operand” “=r”) (if_then_else:SI (match_operator 1 “comparison_operator” [(match_operand:SI 4 “register_operand” “r”) (match_operand:SI 5 “reg_or_int5_operand” “rJ”)]) (match_operand:SI 2 “reg_or_0_operand” “rI”) (match_operand:SI 3 “reg_or_int5_operand” “rJ”)))] “(TARGET_V850E_UP)” “cmp %5,%4 ; cmov %C1,%3,%z2,%0” [(set_attr “length” “6”) (set_attr “cc” “clobber”)])

(define_insn “*movsicc_tst1” [(set (match_operand:SI 0 “register_operand” “=r”) (if_then_else:SI (match_operator 1 “comparison_operator” [(zero_extract:SI (match_operand:QI 2 “memory_operand” “m”) (const_int 1) (match_operand 3 “const_int_operand” “n”)) (const_int 0)]) (match_operand:SI 4 “reg_or_int5_operand” “rJ”) (match_operand:SI 5 “reg_or_0_operand” “rI”)))] “(TARGET_V850E_UP)” “tst1 %3,%2 ; cmov %c1,%4,%z5,%0” [(set_attr “length” “8”) (set_attr “cc” “clobber”)])

(define_insn “*movsicc_tst1_reversed” [(set (match_operand:SI 0 “register_operand” “=r”) (if_then_else:SI (match_operator 1 “comparison_operator” [(zero_extract:SI (match_operand:QI 2 “memory_operand” “m”) (const_int 1) (match_operand 3 “const_int_operand” “n”)) (const_int 0)]) (match_operand:SI 4 “reg_or_0_operand” “rI”) (match_operand:SI 5 “reg_or_int5_operand” “rJ”)))] “(TARGET_V850E_UP)” “tst1 %3,%2 ; cmov %C1,%5,%z4,%0” [(set_attr “length” “8”) (set_attr “cc” “clobber”)])

;; Matching for sasf requires combining 4 instructions, so we provide a ;; dummy pattern to match the first 3, which will always be turned into the ;; second pattern by subsequent combining. As above, we must include the ;; comparison to avoid input reloads in an insn using cc0.

(define_insn “*sasf” [(set (match_operand:SI 0 “register_operand” “=r”) (ior:SI (match_operator 1 “comparison_operator” [(match_operand:SI 3 “register_operand” “r”) (match_operand:SI 4 “reg_or_int5_operand” “rJ”)]) (ashift:SI (match_operand:SI 2 “register_operand” “0”) (const_int 1)))) (clobber (reg:CC CC_REGNUM))] “(TARGET_V850E_UP)” “cmp %4,%3 ; sasf %c1,%0” [(set_attr “length” “6”) (set_attr “cc” “clobber”)])

(define_split [(set (match_operand:SI 0 “register_operand” "") (if_then_else:SI (match_operator 1 “comparison_operator” [(match_operand:SI 4 “register_operand” "") (match_operand:SI 5 “reg_or_int5_operand” "")]) (match_operand:SI 2 “const_int_operand” "") (match_operand:SI 3 “const_int_operand” ""))) (clobber (reg:CC CC_REGNUM))] “(TARGET_V850E_UP) && ((INTVAL (operands[2]) ^ INTVAL (operands[3])) == 1) && ((INTVAL (operands[2]) + INTVAL (operands[3])) != 1) && (GET_CODE (operands[5]) == CONST_INT || REGNO (operands[0]) != REGNO (operands[5])) && REGNO (operands[0]) != REGNO (operands[4])” [(set (match_dup 0) (match_dup 6)) (parallel [(set (match_dup 0) (ior:SI (match_op_dup 7 [(match_dup 4) (match_dup 5)]) (ashift:SI (match_dup 0) (const_int 1)))) (clobber (reg:CC CC_REGNUM))])] { operands[6] = GEN_INT (INTVAL (operands[2]) >> 1); if (INTVAL (operands[2]) & 0x1) operands[7] = operands[1]; else operands[7] = gen_rtx_fmt_ee (reverse_condition (GET_CODE (operands[1])), GET_MODE (operands[1]), XEXP (operands[1], 0), XEXP (operands[1], 1)); })

;; --------------------------------------------------------------------- ;; BYTE SWAP INSTRUCTIONS ;; --------------------------------------------------------------------- (define_expand “rotlhi3” [(parallel [(set (match_operand:HI 0 “register_operand” "") (rotate:HI (match_operand:HI 1 “register_operand” "") (match_operand:HI 2 “const_int_operand” ""))) (clobber (reg:CC CC_REGNUM))])] “(TARGET_V850E_UP)” { if (INTVAL (operands[2]) != 8) FAIL; })

(define_insn “*rotlhi3_8” [(set (match_operand:HI 0 “register_operand” “=r”) (rotate:HI (match_operand:HI 1 “register_operand” “r”) (const_int 8))) (clobber (reg:CC CC_REGNUM))] “(TARGET_V850E_UP)” “bsh %1,%0” [(set_attr “length” “4”) (set_attr “cc” “clobber”)])

(define_expand “rotlsi3” [(parallel [(set (match_operand:SI 0 “register_operand” "") (rotate:SI (match_operand:SI 1 “register_operand” "") (match_operand:SI 2 “const_int_operand” ""))) (clobber (reg:CC CC_REGNUM))])] “(TARGET_V850E_UP)” { if (INTVAL (operands[2]) != 16) FAIL; })

(define_insn “rotlsi3_a” [(set (match_operand:SI 0 “register_operand” “=r”) (match_operator:SI 4 “ior_operator” [(ashift:SI (match_operand:SI 1 “register_operand” “r”) (match_operand:SI 2 “const_int_operand” “n”)) (lshiftrt:SI (match_dup 1) (match_operand:SI 3 “const_int_operand” “n”))]))] “TARGET_V850E3V5_UP && (INTVAL (operands[2]) + INTVAL (operands[3]) == 32)” “rotl %2, %1, %0” [(set_attr “length” “4”) (set_attr “cc” “set_zn”)] )

(define_insn “rotlsi3_b” [(set (match_operand:SI 0 “register_operand” “=r”) (match_operator:SI 4 “ior_operator” [(lshiftrt:SI (match_operand:SI 1 “register_operand” “r”) (match_operand:SI 3 “const_int_operand” “n”)) (ashift:SI (match_dup 1) (match_operand:SI 2 “const_int_operand” “n”))]))] “TARGET_V850E3V5_UP && (INTVAL (operands[2]) + INTVAL (operands[3]) == 32)” “rotl %2, %1, %0” [(set_attr “length” “4”) (set_attr “cc” “set_zn”)] )

(define_insn “rotlsi3_v850e3v5” [(set (match_operand:SI 0 “register_operand” “=r”) (rotate:SI (match_operand:SI 1 “register_operand” “r”) (match_operand:SI 2 “e3v5_shift_operand” “rn”))) (clobber (reg:CC CC_REGNUM))] “TARGET_V850E3V5_UP” “rotl %2, %1, %0” [(set_attr “length” “4”) (set_attr “cc” “set_zn”)] )

(define_insn “*rotlsi3_16” [(set (match_operand:SI 0 “register_operand” “=r”) (rotate:SI (match_operand:SI 1 “register_operand” “r”) (const_int 16))) (clobber (reg:CC CC_REGNUM))] “(TARGET_V850E_UP)” “hsw %1,%0” [(set_attr “length” “4”) (set_attr “cc” “clobber”)])

;; ---------------------------------------------------------------------- ;; JUMP INSTRUCTIONS ;; ----------------------------------------------------------------------

;; Doloop

(define_expand “doloop_begin” [(use (match_operand 0 "" "")) ; loop pseudo (use (match_operand 1 "" ""))] ; doloop_end pattern “TARGET_V850E3V5_UP && TARGET_LOOP” { rtx loop_cnt = operands[0]; gcc_assert (GET_MODE (loop_cnt) == SImode); emit_insn (gen_fix_loop_counter (loop_cnt)); DONE; } )

(define_insn “fix_loop_counter” [(unspec:SI [(match_operand:SI 0 “register_operand” “+r,!m”) (clobber (match_scratch:SI 1 “=X,r”))] UNSPEC_LOOP)] “TARGET_V850E3V5_UP && TARGET_LOOP” { switch (which_alternative) { case 0: return “add 1, %0 # LOOP_BEGIN”; case 1: return “ld.w %0, %1; add 1, %1; st.w %1, %0 # LOOP_BEGIN”; default: gcc_unreachable (); } } [(set_attr “length” “2,6”) (set_attr “cc” “none”)] )

(define_expand “doloop_end” [(use (match_operand 0 "" "")) ; loop pseudo (use (match_operand 1 "" ""))] ; label “TARGET_V850E3V5_UP && TARGET_LOOP” { rtx loop_cnt = operands[0]; rtx label = operands[1];

if (GET_MODE (loop_cnt) != SImode)
  FAIL;

emit_jump_insn (gen_doloop_end_internal_loop (label, loop_cnt));
DONE;

} )

(define_insn “doloop_end_internal_loop” [(set (pc) (if_then_else (ne (match_operand:SI 1 “register_operand” “+r,!m”) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc))) (set (match_dup 1) (plus:SI (match_dup 1) (const_int -1))) (clobber (match_scratch:SI 2 “=X,r”)) (clobber (reg:CC CC_REGNUM))] “TARGET_V850E3V5_UP && TARGET_LOOP” { switch (which_alternative) { case 0: if (get_attr_length (insn) == 4) return “loop %1, %0 # LOOP.1.0”;

  return "add -1, %1; bne %l0 # LOOP.1.1";
case 1:
  return "ld.w %1, %2; add -1, %2; st.w %2, %1; bne %l0 # LOOP.2.1";
default:
  gcc_unreachable ();
}

} [(set (attr “length”) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 65534)) (const_int 4) (const_int 14))) (set_attr “cc” “none”)])

;; Conditional jump instructions

(define_insn “*branch_normal” [(set (pc) (if_then_else (match_operator 1 “comparison_operator” [(cc0) (const_int 0)]) (label_ref (match_operand 0 "" "")) (pc)))] "" { if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0 && (GET_CODE (operands[1]) == GT || GET_CODE (operands[1]) == GE || GET_CODE (operands[1]) == LE || GET_CODE (operands[1]) == LT)) return 0;

if (get_attr_length (insn) == 2) return “b%b1 %l0”; if (TARGET_V850E3V5_UP && get_attr_length (insn) == 4) return “b%b1 %l0”; return “b%B1 .+6 ; jr %l0”; } [(set (attr “length”) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 256)) (const_int 2) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 65536)) (const_int 4) (const_int 6)))) (set_attr “cc” “none”)])

(define_insn “*branch_invert” [(set (pc) (if_then_else (match_operator 1 “comparison_operator” [(cc0) (const_int 0)]) (pc) (label_ref (match_operand 0 "" ""))))] "" { if ((cc_status.flags & CC_OVERFLOW_UNUSABLE) != 0 && (GET_CODE (operands[1]) == GT || GET_CODE (operands[1]) == GE || GET_CODE (operands[1]) == LE || GET_CODE (operands[1]) == LT)) return NULL;

if (get_attr_length (insn) == 2) return “b%B1 %l0”;

if (TARGET_V850E3V5_UP && get_attr_length (insn) == 4) return “b%B1 %l0”;

return “b%b1 .+6 ; jr %l0”; } [(set (attr “length”) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 256)) (const_int 2) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 65536)) (const_int 4) (const_int 6)))) (set_attr “cc” “none”)])

(define_insn “branch_z_normal” [(set (pc) (if_then_else (match_operand 1 “v850_float_z_comparison_operator” "") (label_ref (match_operand 0 "" "")) (pc)))] “TARGET_V850E2V3_UP” { if (get_attr_length (insn) == 2) return “bz %l0”;

if (TARGET_V850E3V5_UP && get_attr_length (insn) == 4) return “bz %l0”;

return “bnz 1f ; jr %l0 ; 1:”; } [(set (attr “length”) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 256)) (const_int 2) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 65536)) (const_int 4) (const_int 6)))) (set_attr “cc” “none”)])

(define_insn “*branch_z_invert” [(set (pc) (if_then_else (match_operand 1 “v850_float_z_comparison_operator” "") (pc) (label_ref (match_operand 0 "" ""))))] “TARGET_V850E2V3_UP” { if (get_attr_length (insn) == 2) return “bnz %l0”;

if (TARGET_V850E3V5_UP && get_attr_length (insn) == 4) return “bnz %l0”;

return “bz 1f ; jr %l0 ; 1:”; } [(set (attr “length”) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 256)) (const_int 2) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 65536)) (const_int 4) (const_int 6)))) (set_attr “cc” “none”)])

(define_insn “branch_nz_normal” [(set (pc) (if_then_else (match_operand 1 “v850_float_nz_comparison_operator” "") (label_ref (match_operand 0 "" "")) (pc)))] “TARGET_V850E2V3_UP” { if (get_attr_length (insn) == 2) return “bnz %l0”;

if (TARGET_V850E3V5_UP && get_attr_length (insn) == 4) return “bnz %l0”;

return “bz 1f ; jr %l0 ; 1:”; } [(set (attr “length”) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 256)) (const_int 2) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 65536)) (const_int 4) (const_int 6)))) (set_attr “cc” “none”)])

(define_insn “*branch_nz_invert” [(set (pc) (if_then_else (match_operand 1 “v850_float_nz_comparison_operator” "") (pc) (label_ref (match_operand 0 "" ""))))] “TARGET_V850E2V3_UP” { if (get_attr_length (insn) == 2) return “bz %l0”;

if (TARGET_V850E3V5_UP && get_attr_length (insn) == 4) return “bz %l0”;

return “bnz 1f ; jr %l0 ; 1:”; } [(set (attr “length”) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 256)) (const_int 2) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 65536)) (const_int 4) (const_int 6)))) (set_attr “cc” “none”)])

;; Unconditional and other jump instructions.

(define_insn “jump” [(set (pc) (label_ref (match_operand 0 "" "")))] "" { if (get_attr_length (insn) == 2) return “br %0”; else return “jr %0”; } [(set (attr “length”) (if_then_else (lt (abs (minus (match_dup 0) (pc))) (const_int 256)) (const_int 2) (const_int 4))) (set_attr “cc” “none”)])

(define_insn “indirect_jump” [(set (pc) (match_operand:SI 0 “register_operand” “r”))] "" “jmp %0” [(set_attr “length” “2”) (set_attr “cc” “none”)])

(define_insn “tablejump” [(set (pc) (match_operand:SI 0 “register_operand” “r”)) (use (label_ref (match_operand 1 "" "")))] "" “jmp %0” [(set_attr “length” “2”) (set_attr “cc” “none”)])

(define_insn “switch” [(set (pc) (plus:SI (sign_extend:SI (mem:HI (plus:SI (ashift:SI (match_operand:SI 0 “register_operand” “r”) (const_int 1)) (label_ref (match_operand 1 "" ""))))) (label_ref (match_dup 1))))] “(TARGET_V850E_UP)” “switch %0” [(set_attr “length” “2”) (set_attr “cc” “none”)])

(define_expand “casesi” [(match_operand:SI 0 “register_operand” "") (match_operand:SI 1 “register_operand” "") (match_operand:SI 2 “register_operand” "") (match_operand 3 "" "") (match_operand 4 "" "")] "" { rtx reg = gen_reg_rtx (SImode); rtx tableaddress = gen_reg_rtx (SImode); rtx test; rtx mem;

/* Subtract the lower bound from the index.  */
emit_insn (gen_subsi3 (reg, operands[0], operands[1]));

/* Compare the result against the number of table entries;
   branch to the default label if out of range of the table.  */
test = gen_rtx_fmt_ee (GTU, VOIDmode, reg, operands[2]);
emit_jump_insn (gen_cbranchsi4 (test, reg, operands[2], operands[4]));

/* Shift index for the table array access.  */
emit_insn (gen_ashlsi3 (reg, reg, GEN_INT (TARGET_BIG_SWITCH ? 2 : 1)));
/* Load the table address into a pseudo.  */
emit_insn (gen_movsi (tableaddress,
		  gen_rtx_LABEL_REF (Pmode, operands[3])));
/* Add the table address to the index.  */
emit_insn (gen_addsi3 (reg, reg, tableaddress));
/* Load the table entry.  */
mem = gen_const_mem (CASE_VECTOR_MODE, reg);
if (! TARGET_BIG_SWITCH)
  {
rtx reg2 = gen_reg_rtx (HImode);
emit_insn (gen_movhi (reg2, mem));
emit_insn (gen_extendhisi2 (reg, reg2));
  }
else
  emit_insn (gen_movsi (reg, mem));
/* Add the table address.  */
emit_insn (gen_addsi3 (reg, reg, tableaddress));
/* Branch to the switch label.  */
emit_jump_insn (gen_tablejump (reg, operands[3]));
DONE;

})

;; Call subroutine with no return value.

(define_expand “call” [(call (match_operand:QI 0 “general_operand” "") (match_operand:SI 1 “general_operand” ""))] "" { if (! call_address_operand (XEXP (operands[0], 0), QImode) || TARGET_LONG_CALLS) XEXP (operands[0], 0) = force_reg (SImode, XEXP (operands[0], 0)); if (TARGET_LONG_CALLS) emit_call_insn (gen_call_internal_long (XEXP (operands[0], 0), operands[1])); else emit_call_insn (gen_call_internal_short (XEXP (operands[0], 0), operands[1]));

DONE;

})

(define_insn “call_internal_short” [(call (mem:QI (match_operand:SI 0 “call_address_operand” “S,r”)) (match_operand:SI 1 “general_operand” “g,g”)) (clobber (reg:SI 31))] “! TARGET_LONG_CALLS” { if (which_alternative == 1) { if (TARGET_V850E3V5_UP) return “jarl [%0], r31”;

    return "jarl .+4, r31 ; add 4, r31 ; jmp %0";
  }

return "jarl %0, r31";

} [(set_attr “length” “4,8”) (set_attr “cc” “clobber,clobber”)] )

(define_insn “call_internal_long” [(call (mem:QI (match_operand:SI 0 “call_address_operand” “S,r”)) (match_operand:SI 1 “general_operand” “g,g”)) (clobber (reg:SI 31))] “TARGET_LONG_CALLS” { if (which_alternative == 0) { if (GET_CODE (operands[0]) == REG) return “jarl %0,r31”;

  if (TARGET_V850E3V5_UP)
return "mov hilo(%0), r11 ; jarl [r11], r31";

  return "movhi hi(%0), r0, r11 ; movea lo(%0), r11, r11 ; jarl .+4,r31 ; add 4, r31 ; jmp r11";
}

if (TARGET_V850E3V5_UP) return “jarl [%0], r31”;

return “jarl .+4,r31 ; add 4,r31 ; jmp %0”; } [(set_attr “length” “16,8”) (set_attr “cc” “clobber,clobber”)] )

;; Call subroutine, returning value in operand 0 ;; (which must be a hard register).

(define_expand “call_value” [(set (match_operand 0 "" "") (call (match_operand:QI 1 “general_operand” "") (match_operand:SI 2 “general_operand” "")))] "" { if (! call_address_operand (XEXP (operands[1], 0), QImode) || TARGET_LONG_CALLS) XEXP (operands[1], 0) = force_reg (SImode, XEXP (operands[1], 0)); if (TARGET_LONG_CALLS) emit_call_insn (gen_call_value_internal_long (operands[0], XEXP (operands[1], 0), operands[2])); else emit_call_insn (gen_call_value_internal_short (operands[0], XEXP (operands[1], 0), operands[2])); DONE; })

(define_insn “call_value_internal_short” [(set (match_operand 0 "" “=r,r”) (call (mem:QI (match_operand:SI 1 “call_address_operand” “S,r”)) (match_operand:SI 2 “general_operand” “g,g”))) (clobber (reg:SI 31))] “! TARGET_LONG_CALLS” { if (which_alternative == 1) { if (TARGET_V850E3V5_UP) return “jarl [%1], r31”;

    return "jarl .+4, r31 ; add 4, r31 ; jmp %1";
  }

return "jarl %1, r31";

} [(set_attr “length” “4,8”) (set_attr “cc” “clobber,clobber”)] )

(define_insn “call_value_internal_long” [(set (match_operand 0 "" “=r,r”) (call (mem:QI (match_operand:SI 1 “call_address_operand” “S,r”)) (match_operand:SI 2 “general_operand” “g,g”))) (clobber (reg:SI 31))] “TARGET_LONG_CALLS” { if (which_alternative == 0) { if (GET_CODE (operands[1]) == REG) return “jarl %1, r31”;

  /* Reload can generate this pattern....  */
  if (TARGET_V850E3V5_UP)
    return "mov hilo(%1), r11 ; jarl [r11], r31";

  return "movhi hi(%1), r0, r11 ; movea lo(%1), r11, r11 ; jarl .+4, r31 ; add 4, r31 ; jmp r11";
}

if (TARGET_V850E3V5_UP) return “jarl [%1], r31”;

return “jarl .+4, r31 ; add 4, r31 ; jmp %1”; } [(set_attr “length” “16,8”) (set_attr “cc” “clobber,clobber”)] )

(define_insn “nop” [(const_int 0)] "" “nop” [(set_attr “length” “2”) (set_attr “cc” “none”)]) ;; ---------------------------------------------------------------------- ;; EXTEND INSTRUCTIONS ;; ----------------------------------------------------------------------

(define_insn “*zero_extendhisi2_v850e” [(set (match_operand:SI 0 “register_operand” “=r,r,r,r”) (zero_extend:SI (match_operand:HI 1 “nonimmediate_operand” “0,r,T,m”))) (clobber (reg:CC CC_REGNUM))] “(TARGET_V850E_UP)” “@ zxh %0 andi 65535,%1,%0 sld.hu %1,%0 ld.hu %1,%0” [(set_attr “length” “2,4,2,4”) (set_attr “cc” “none_0hit,set_zn,none_0hit,none_0hit”)])

(define_insn “*zero_extendhisi2_v850” [(set (match_operand:SI 0 “register_operand” “=r”) (zero_extend:SI (match_operand:HI 1 “register_operand” “r”))) (clobber (reg:CC CC_REGNUM))] ;; A lie, but we have to match the expander "" “andi 65535,%1,%0” [(set_attr “length” “4”) (set_attr “cc” “set_zn”)])

(define_expand “zero_extendhisi2” [(parallel [(set (match_operand:SI 0 “register_operand”) (zero_extend:SI (match_operand:HI 1 “nonimmediate_operand”))) (clobber (reg:CC CC_REGNUM))])] "" { if (! (TARGET_V850E_UP)) operands[1] = force_reg (HImode, operands[1]); })

(define_insn “*zero_extendqisi2_v850e” [(set (match_operand:SI 0 “register_operand” “=r,r,r,r”) (zero_extend:SI (match_operand:QI 1 “nonimmediate_operand” “0,r,T,m”))) (clobber (reg:CC CC_REGNUM))] “(TARGET_V850E_UP)” “@ zxb %0 andi 255,%1,%0 sld.bu %1,%0 ld.bu %1,%0” [(set_attr “length” “2,4,2,4”) (set_attr “cc” “none_0hit,set_zn,none_0hit,none_0hit”)])

(define_insn “*zero_extendqisi2_v850” [(set (match_operand:SI 0 “register_operand” “=r”) (zero_extend:SI (match_operand:QI 1 “register_operand” “r”))) (clobber (reg:CC CC_REGNUM))] ;; A lie, but we have to match the expander "" “andi 255,%1,%0” [(set_attr “length” “4”) (set_attr “cc” “set_zn”)])

(define_expand “zero_extendqisi2” [(parallel [(set (match_operand:SI 0 “register_operand”) (zero_extend:SI (match_operand:QI 1 “nonimmediate_operand”))) (clobber (reg:CC CC_REGNUM))])] "" { if (! (TARGET_V850E_UP)) operands[1] = force_reg (QImode, operands[1]); })

;;- sign extension instructions

;; ??? The extendhisi2 pattern should not emit shifts for v850e?

(define_insn “*extendhisi_insn” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (sign_extend:SI (match_operand:HI 1 “nonimmediate_operand” “0,Q,m”))) (clobber (reg:CC CC_REGNUM))] “(TARGET_V850E_UP)” “@ sxh %0 sld.h %1,%0 ld.h %1,%0” [(set_attr “length” “2,2,4”) (set_attr “cc” “none_0hit,none_0hit,none_0hit”)])

;; ??? This is missing a sign extend from memory pattern to match the ld.h ;; instruction.

(define_expand “extendhisi2” [(parallel [(set (match_dup 2) (ashift:SI (match_operand:HI 1 “register_operand” "") (const_int 16))) (clobber (reg:CC CC_REGNUM))]) (parallel [(set (match_operand:SI 0 “register_operand” "") (ashiftrt:SI (match_dup 2) (const_int 16))) (clobber (reg:CC CC_REGNUM))])] "" { operands[1] = gen_lowpart (SImode, operands[1]); operands[2] = gen_reg_rtx (SImode); })

;; ??? The extendqisi2 pattern should not emit shifts for v850e?

(define_insn “*extendqisi_insn” [(set (match_operand:SI 0 “register_operand” “=r,r,r”) (sign_extend:SI (match_operand:QI 1 “nonimmediate_operand” “0,Q,m”))) (clobber (reg:CC CC_REGNUM))] “(TARGET_V850E_UP)” “@ sxb %0 sld.b %1,%0 ld.b %1,%0” [(set_attr “length” “2,2,4”) (set_attr “cc” “none_0hit,none_0hit,none_0hit”)])

;; ??? This is missing a sign extend from memory pattern to match the ld.b ;; instruction.

(define_expand “extendqisi2” [(parallel [(set (match_dup 2) (ashift:SI (match_operand:QI 1 “register_operand” "") (const_int 24))) (clobber (reg:CC CC_REGNUM))]) (parallel [(set (match_operand:SI 0 “register_operand” "") (ashiftrt:SI (match_dup 2) (const_int 24))) (clobber (reg:CC CC_REGNUM))])] "" { operands[1] = gen_lowpart (SImode, operands[1]); operands[2] = gen_reg_rtx (SImode); }) ;; ---------------------------------------------------------------------- ;; SHIFTS ;; ----------------------------------------------------------------------

(define_insn “ashlsi3” [(set (match_operand:SI 0 “register_operand” “=r,r”) (ashift:SI (match_operand:SI 1 “register_operand” “0,0”) (match_operand:SI 2 “nonmemory_operand” “r,N”))) (clobber (reg:CC CC_REGNUM))] "" “@ shl %2,%0 shl %2,%0” [(set_attr “length” “4,2”) (set_attr “cc” “set_zn”)])

(define_insn “ashlsi3_v850e2” [(set (match_operand:SI 0 “register_operand” “=r”) (ashift:SI (match_operand:SI 1 “register_operand” “r”) (match_operand:SI 2 “nonmemory_operand” “r”))) (clobber (reg:CC CC_REGNUM))] “TARGET_V850E2_UP” “shl %2,%1,%0” [(set_attr “length” “4”) (set_attr “cc” “set_znv”)])

(define_insn “lshrsi3” [(set (match_operand:SI 0 “register_operand” “=r,r”) (lshiftrt:SI (match_operand:SI 1 “register_operand” “0,0”) (match_operand:SI 2 “nonmemory_operand” “r,N”))) (clobber (reg:CC CC_REGNUM))] "" “@ shr %2,%0 shr %2,%0” [(set_attr “length” “4,2”) (set_attr “cc” “set_zn”)])

(define_insn “lshrsi3_v850e2” [(set (match_operand:SI 0 “register_operand” “=r”) (lshiftrt:SI (match_operand:SI 1 “register_operand” “r”) (match_operand:SI 2 “nonmemory_operand” “r”))) (clobber (reg:CC CC_REGNUM))] “TARGET_V850E2_UP” “shr %2,%1,%0” [(set_attr “length” “4”) (set_attr “cc” “set_zn”)])

(define_insn “ashrsi3” [(set (match_operand:SI 0 “register_operand” “=r,r”) (ashiftrt:SI (match_operand:SI 1 “register_operand” “0,0”) (match_operand:SI 2 “nonmemory_operand” “r,N”))) (clobber (reg:CC CC_REGNUM))] "" “@ sar %2,%0 sar %2,%0” [(set_attr “length” “4,2”) (set_attr “cc” “set_zn, set_zn”)])

(define_insn “ashrsi3_v850e2” [(set (match_operand:SI 0 “register_operand” “=r”) (ashiftrt:SI (match_operand:SI 1 “register_operand” “r”) (match_operand:SI 2 “nonmemory_operand” “r”))) (clobber (reg:CC CC_REGNUM))] “TARGET_V850E2_UP” “sar %2,%1,%0” [(set_attr “length” “4”) (set_attr “cc” “set_zn”)])

;; ---------------------------------------------------------------------- ;; FIND FIRST BIT INSTRUCTION ;; ----------------------------------------------------------------------

(define_insn “ffssi2” [(set (match_operand:SI 0 “register_operand” “=r”) (ffs:SI (match_operand:SI 1 “register_operand” “r”))) (clobber (reg:CC CC_REGNUM))] “TARGET_V850E2_UP” “sch1r %1,%0” [(set_attr “length” “4”) (set_attr “cc” “clobber”)])

;; ---------------------------------------------------------------------- ;; PROLOGUE/EPILOGUE ;; ---------------------------------------------------------------------- (define_expand “prologue” [(const_int 0)] "" { expand_prologue (); DONE; })

(define_expand “epilogue” [(return)] "" { expand_epilogue (); DONE; })

(define_insn “return_simple” [(return)] “reload_completed” “jmp [r31]” [(set_attr “length” “2”) (set_attr “cc” “none”)])

(define_insn “return_internal” [(return) (use (reg:SI 31))] "" “jmp [r31]” [(set_attr “length” “2”) (set_attr “cc” “none”)])

;; ---------------------------------------------------------------------- ;; v850e2V3 floating-point hardware support ;; ----------------------------------------------------------------------

(define_insn “addsf3” [(set (match_operand:SF 0 “register_operand” “=r”) (plus:SF (match_operand:SF 1 “register_operand” “r”) (match_operand:SF 2 “register_operand” “r”)))] “TARGET_USE_FPU” “addf.s %1,%2,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “adddf3” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (plus:DF (match_operand:DF 1 “even_reg_operand” “r”) (match_operand:DF 2 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “addf.d %1,%2,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “subsf3” [(set (match_operand:SF 0 “register_operand” “=r”) (minus:SF (match_operand:SF 1 “register_operand” “r”) (match_operand:SF 2 “register_operand” “r”)))] “TARGET_USE_FPU” “subf.s %2,%1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “subdf3” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (minus:DF (match_operand:DF 1 “even_reg_operand” “r”) (match_operand:DF 2 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “subf.d %2,%1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “mulsf3” [(set (match_operand:SF 0 “register_operand” “=r”) (mult:SF (match_operand:SF 1 “register_operand” “r”) (match_operand:SF 2 “register_operand” “r”)))] “TARGET_USE_FPU” “mulf.s %1,%2,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “muldf3” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (mult:DF (match_operand:DF 1 “even_reg_operand” “r”) (match_operand:DF 2 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “mulf.d %1,%2,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “divsf3” [(set (match_operand:SF 0 “register_operand” “=r”) (div:SF (match_operand:SF 1 “register_operand” “r”) (match_operand:SF 2 “register_operand” “r”)))] “TARGET_USE_FPU” “divf.s %2,%1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “divdf3” [(set (match_operand:DF 0 “register_operand” “=r”) (div:DF (match_operand:DF 1 “even_reg_operand” “r”) (match_operand:DF 2 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “divf.d %2,%1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “minsf3” [(set (match_operand:SF 0 “register_operand” “=r”) (smin:SF (match_operand:SF 1 “reg_or_0_operand” “r”) (match_operand:SF 2 “reg_or_0_operand” “r”)))] “TARGET_USE_FPU” “minf.s %z1,%z2,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “mindf3” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (smin:DF (match_operand:DF 1 “even_reg_operand” “r”) (match_operand:DF 2 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “minf.d %1,%2,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “maxsf3” [(set (match_operand:SF 0 “register_operand” “=r”) (smax:SF (match_operand:SF 1 “reg_or_0_operand” “r”) (match_operand:SF 2 “reg_or_0_operand” “r”)))] “TARGET_USE_FPU” “maxf.s %z1,%z2,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “maxdf3” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (smax:DF (match_operand:DF 1 “even_reg_operand” “r”) (match_operand:DF 2 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “maxf.d %1,%2,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “abssf2” [(set (match_operand:SF 0 “register_operand” “=r”) (abs:SF (match_operand:SF 1 “register_operand” “r”)))] “TARGET_USE_FPU” “absf.s %1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “absdf2” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (abs:DF (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “absf.d %1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “negsf2” [(set (match_operand:SF 0 “register_operand” “=r”) (neg:SF (match_operand:SF 1 “register_operand” “r”)))] “TARGET_USE_FPU” “negf.s %1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “negdf2” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (neg:DF (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “negf.d %1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

;; square-root (define_insn “sqrtsf2” [(set (match_operand:SF 0 “register_operand” “=r”) (sqrt:SF (match_operand:SF 1 “register_operand” “r”)))] “TARGET_USE_FPU” “sqrtf.s %1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “sqrtdf2” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (sqrt:DF (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “sqrtf.d %1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

;; float -> int (define_insn “fix_truncsfsi2” [(set (match_operand:SI 0 “register_operand” “=r”) (fix:SI (match_operand:SF 1 “register_operand” “r”)))] “TARGET_USE_FPU” “trncf.sw %1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “fixuns_truncsfsi2” [(set (match_operand:SI 0 “register_operand” “=r”) (unsigned_fix:SI (match_operand:SF 1 “register_operand” “r”)))] “TARGET_USE_FPU” “trncf.suw %1, %0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)] )

(define_insn “fix_truncdfsi2” [(set (match_operand:SI 0 “register_operand” “=r”) (fix:SI (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “trncf.dw %1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “fixuns_truncdfsi2” [(set (match_operand:SI 0 “register_operand” “=r”) (unsigned_fix:SI (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “trncf.duw %1, %0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)] )

(define_insn “fix_truncsfdi2” [(set (match_operand:DI 0 “register_operand” “=r”) (fix:DI (match_operand:SF 1 “register_operand” “r”)))] “TARGET_USE_FPU” “trncf.sl %1, %0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “fixuns_truncsfdi2” [(set (match_operand:DI 0 “register_operand” “=r”) (unsigned_fix:DI (match_operand:SF 1 “register_operand” “r”)))] “TARGET_USE_FPU” “trncf.sul %1, %0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)] )

(define_insn “fix_truncdfdi2” [(set (match_operand:DI 0 “register_operand” “=r”) (fix:DI (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “trncf.dl %1, %0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “fixuns_truncdfdi2” [(set (match_operand:DI 0 “register_operand” “=r”) (unsigned_fix:DI (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “trncf.dul %1, %0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)] )

;; int -> float (define_insn “floatsisf2” [(set (match_operand:SF 0 “register_operand” “=r”) (float:SF (match_operand:SI 1 “reg_or_0_operand” “rI”)))] “TARGET_USE_FPU” “cvtf.ws %z1, %0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “unsfloatsisf2” [(set (match_operand:SF 0 “register_operand” “=r”) (unsigned_float:SF (match_operand:SI 1 “reg_or_0_operand” “rI”)))] “TARGET_USE_FPU” “cvtf.uws %z1, %0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “floatsidf2” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (float:DF (match_operand:SI 1 “reg_or_0_operand” “rI”)))] “TARGET_USE_FPU” “cvtf.wd %z1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “unsfloatsidf2” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (unsigned_float:DF (match_operand:SI 1 “reg_or_0_operand” “rI”)))] “TARGET_USE_FPU” “cvtf.uwd %z1, %0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “floatdisf2” [(set (match_operand:SF 0 “even_reg_operand” “=r”) (float:SF (match_operand:DI 1 “reg_or_0_operand” “rI”)))] “TARGET_USE_FPU” “cvtf.ls %z1, %0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “unsfloatdisf2” [(set (match_operand:SF 0 “even_reg_operand” “=r”) (unsigned_float:SF (match_operand:DI 1 “reg_or_0_operand” “rI”)))] “TARGET_USE_FPU” “cvtf.uls %z1, %0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “floatdidf2” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (float:DF (match_operand:DI 1 “reg_or_0_operand” “rI”)))] “TARGET_USE_FPU” “cvtf.ld %z1, %0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “unsfloatdidf2” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (unsigned_float:DF (match_operand:DI 1 “reg_or_0_operand” “rI”)))] “TARGET_USE_FPU” “cvtf.uld %z1, %0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

;; single-float -> double-float (define_insn “extendsfdf2” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (float_extend:DF (match_operand:SF 1 “reg_or_0_operand” “rI”)))] “TARGET_USE_FPU” “cvtf.sd %z1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

;; double-float -> single-float (define_insn “truncdfsf2” [(set (match_operand:SF 0 “register_operand” “=r”) (float_truncate:SF (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “cvtf.ds %1,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

;; ;; ---------------- special insns ;;

;;; reciprocal (define_insn “recipsf2” [(set (match_operand:SF 0 “register_operand” “=r”) (div:SF (match_operand:SF 1 “const_float_1_operand” "") (match_operand:SF 2 “register_operand” “r”)))] “TARGET_USE_FPU” “recipf.s %2,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “recipdf2” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (div:DF (match_operand:DF 1 “const_float_1_operand” "") (match_operand:DF 2 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “recipf.d %2,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

;;; reciprocal of square-root (define_insn “rsqrtsf2” [(set (match_operand:SF 0 “register_operand” “=r”) (div:SF (match_operand:SF 1 “const_float_1_operand” "") (sqrt:SF (match_operand:SF 2 “register_operand” “r”))))] “TARGET_USE_FPU” “rsqrtf.s %2,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “rsqrtdf2” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (div:DF (match_operand:DF 1 “const_float_1_operand” "") (sqrt:DF (match_operand:DF 2 “even_reg_operand” “r”))))] “TARGET_USE_FPU” “rsqrtf.d %2,%0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

;; Note: The FPU-2.0 (ie pre e3v5) versions of these routines do not actually ;; need operand 4 to be the same as operand 0. But the FPU-2.0 versions are ;; also deprecated so the loss of flexibility is unimportant.

;;; multiply-add (define_insn “fmasf4” [(set (match_operand:SF 0 “register_operand” “=r”) (fma:SF (match_operand:SF 1 “register_operand” “r”) (match_operand:SF 2 “register_operand” “r”) (match_operand:SF 3 “register_operand” “0”)))] “TARGET_USE_FPU” { return TARGET_V850E3V5_UP ? “fmaf.s %1, %2, %0” : “maddf.s %2, %1, %3, %0”; } [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

;;; multiply-subtract (define_insn “fmssf4” [(set (match_operand:SF 0 “register_operand” “=r”) (fma:SF (match_operand:SF 1 “register_operand” “r”) (match_operand:SF 2 “register_operand” “r”) (neg:SF (match_operand:SF 3 “register_operand” “0”))))] “TARGET_USE_FPU” { return TARGET_V850E3V5_UP ? “fmsf.s %1, %2, %0” : “msubf.s %2, %1, %3, %0”; } [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

;;; negative-multiply-add (define_insn “fnmasf4” [(set (match_operand:SF 0 “register_operand” “=r”) (neg:SF (fma:SF (match_operand:SF 1 “register_operand” “r”) (match_operand:SF 2 “register_operand” “r”) (match_operand:SF 3 “register_operand” “0”))))] “TARGET_USE_FPU” { return TARGET_V850E3V5_UP ? “fnmaf.s %1, %2, %0” : “nmaddf.s %2, %1, %3, %0”; } [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

;; negative-multiply-subtract (define_insn “fnmssf4” [(set (match_operand:SF 0 “register_operand” “=r”) (neg:SF (fma:SF (match_operand:SF 1 “register_operand” “r”) (match_operand:SF 2 “register_operand” “r”) (neg:SF (match_operand:SF 3 “register_operand” “0”)))))] “TARGET_USE_FPU” { return TARGET_V850E3V5_UP ? “fnmsf.s %1, %2, %0” : “nmsubf.s %2, %1, %3, %0”; } [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)]) ; ; ---------------- comparison/conditionals ; ; SF

(define_insn “cmpsf_le_insn” [(set (reg:CC_FPU_LE FCC_REGNUM) (compare:CC_FPU_LE (match_operand:SF 0 “register_operand” “r”) (match_operand:SF 1 “register_operand” “r”)))] “TARGET_USE_FPU” “cmpf.s le, %z0, %z1” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “cmpsf_lt_insn” [(set (reg:CC_FPU_LT FCC_REGNUM) (compare:CC_FPU_LT (match_operand:SF 0 “register_operand” “r”) (match_operand:SF 1 “register_operand” “r”)))] “TARGET_USE_FPU” “cmpf.s lt, %z0, %z1” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “cmpsf_ge_insn” [(set (reg:CC_FPU_GE FCC_REGNUM) (compare:CC_FPU_GE (match_operand:SF 0 “register_operand” “r”) (match_operand:SF 1 “register_operand” “r”)))] “TARGET_USE_FPU” “cmpf.s le, %z1, %z0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “cmpsf_gt_insn” [(set (reg:CC_FPU_GT FCC_REGNUM) (compare:CC_FPU_GT (match_operand:SF 0 “register_operand” “r”) (match_operand:SF 1 “register_operand” “r”)))] “TARGET_USE_FPU” “cmpf.s lt, %z1, %z0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “cmpsf_eq_insn” [(set (reg:CC_FPU_EQ FCC_REGNUM) (compare:CC_FPU_EQ (match_operand:SF 0 “register_operand” “r”) (match_operand:SF 1 “register_operand” “r”)))] “TARGET_USE_FPU” “cmpf.s eq, %z0, %z1” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

; DF

(define_insn “cmpdf_le_insn” [(set (reg:CC_FPU_LE FCC_REGNUM) (compare:CC_FPU_LE (match_operand:DF 0 “even_reg_operand” “r”) (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “cmpf.d le, %z0, %z1” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “cmpdf_lt_insn” [(set (reg:CC_FPU_LT FCC_REGNUM) (compare:CC_FPU_LT (match_operand:DF 0 “even_reg_operand” “r”) (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “cmpf.d lt, %z0, %z1” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “cmpdf_ge_insn” [(set (reg:CC_FPU_GE FCC_REGNUM) (compare:CC_FPU_GE (match_operand:DF 0 “even_reg_operand” “r”) (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “cmpf.d le, %z1, %z0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “cmpdf_gt_insn” [(set (reg:CC_FPU_GT FCC_REGNUM) (compare:CC_FPU_GT (match_operand:DF 0 “even_reg_operand” “r”) (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “cmpf.d lt, %z1, %z0” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

(define_insn “cmpdf_eq_insn” [(set (reg:CC_FPU_EQ FCC_REGNUM) (compare:CC_FPU_EQ (match_operand:DF 0 “even_reg_operand” “r”) (match_operand:DF 1 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “cmpf.d eq, %z0, %z1” [(set_attr “length” “4”) (set_attr “cc” “none_0hit”) (set_attr “type” “fpu”)])

;; ;; Transfer a v850e2v3 fcc to the Z bit of CC0 (this is necessary to do a ;; conditional branch based on a floating-point compare) ;;

(define_insn “trfsr” [(set (match_operand 0 "" "") (match_operand 1 "" ""))] “TARGET_USE_FPU && GET_MODE(operands[0]) == GET_MODE(operands[1]) && GET_CODE(operands[0]) == REG && REGNO (operands[0]) == CC_REGNUM && GET_CODE(operands[1]) == REG && REGNO (operands[1]) == FCC_REGNUM && (GET_MODE(operands[0]) == CC_FPU_LEmode || GET_MODE(operands[0]) == CC_FPU_GEmode || GET_MODE(operands[0]) == CC_FPU_LTmode || GET_MODE(operands[0]) == CC_FPU_GTmode || GET_MODE(operands[0]) == CC_FPU_EQmode || GET_MODE(operands[0]) == CC_FPU_NEmode)” “trfsr” [(set_attr “length” “4”) (set_attr “cc” “set_z”) (set_attr “type” “fpu”)])

;; ;; Floating-point conditional moves for the v850e2v3. ;;

;; The actual v850e2v3 conditional move instructions ;; (define_insn “movsfcc_z_insn” [(set (match_operand:SF 0 “register_operand” “=r”) (if_then_else:SF (match_operand 3 “v850_float_z_comparison_operator” "") (match_operand:SF 1 “reg_or_0_operand” “rIG”) (match_operand:SF 2 “reg_or_0_operand” “rIG”)))] “TARGET_USE_FPU” “cmovf.s 0,%z1,%z2,%0” [(set_attr “cc” “clobber”)]) ;; ??? or none_0hit

(define_insn “movsfcc_nz_insn” [(set (match_operand:SF 0 “register_operand” “=r”) (if_then_else:SF (match_operand 3 “v850_float_nz_comparison_operator” "") (match_operand:SF 1 “reg_or_0_operand” “rIG”) (match_operand:SF 2 “reg_or_0_operand” “rIG”)))] “TARGET_USE_FPU” “cmovf.s 0,%z2,%z1,%0” [(set_attr “cc” “clobber”)]) ;; ??? or none_0hit

(define_insn “movdfcc_z_insn” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (if_then_else:DF (match_operand 3 “v850_float_z_comparison_operator” "") (match_operand:DF 1 “even_reg_operand” “r”) (match_operand:DF 2 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “cmovf.d 0,%z1,%z2,%0” [(set_attr “cc” “clobber”)]) ;; ??? or none_0hit

(define_insn “movdfcc_nz_insn” [(set (match_operand:DF 0 “even_reg_operand” “=r”) (if_then_else:DF (match_operand 3 “v850_float_nz_comparison_operator” "") (match_operand:DF 1 “even_reg_operand” “r”) (match_operand:DF 2 “even_reg_operand” “r”)))] “TARGET_USE_FPU” “cmovf.d 0,%z2,%z1,%0” [(set_attr “cc” “clobber”)]) ;; ??? or none_0hit

(define_insn “movedfcc_z_zero” [(set (match_operand:DF 0 “register_operand” “=r”) (if_then_else:DF (match_operand 3 “v850_float_z_comparison_operator” "") (match_operand:DF 1 “reg_or_0_operand” “rIG”) (match_operand:DF 2 “reg_or_0_operand” “rIG”)))] “TARGET_USE_FPU” “cmovf.s 0,%z1,%z2,%0 ; cmovf.s 0,%Z1,%Z2,%R0” [(set_attr “length” “8”) (set_attr “cc” “clobber”)]) ;; ??? or none_0hit

(define_insn “movedfcc_nz_zero” [(set (match_operand:DF 0 “register_operand” “=r”) (if_then_else:DF (match_operand 3 “v850_float_nz_comparison_operator” "") (match_operand:DF 1 “reg_or_0_operand” “rIG”) (match_operand:DF 2 “reg_or_0_operand” “rIG”)))] “TARGET_USE_FPU” “cmovf.s 0,%z2,%z1,%0 ; cmovf.s 0,%Z2,%Z1,%R0” [(set_attr “length” “8”) (set_attr “cc” “clobber”)]) ;; ??? or none_0hit

;; ---------------------------------------------------------------------- ;; HELPER INSTRUCTIONS for saving the prologue and epilogue registers ;; ----------------------------------------------------------------------

;; This pattern will match a stack adjust RTX followed by any number of push ;; RTXs. These RTXs will then be turned into a suitable call to a worker ;; function.

;; ;; Actually, convert the RTXs into a PREPARE instruction. ;;

(define_insn "" [(match_parallel 0 “pattern_is_ok_for_prepare” [(set (reg:SI 3) (plus:SI (reg:SI 3) (match_operand:SI 1 “immediate_operand” “i”))) (set (mem:SI (plus:SI (reg:SI 3) (match_operand:SI 2 “immediate_operand” “i”))) (match_operand:SI 3 “register_is_ok_for_epilogue” “r”))])] “TARGET_PROLOG_FUNCTION && (TARGET_V850E_UP)” { return construct_prepare_instruction (operands[0]); } [(set_attr “length” “4”) (set_attr “cc” “clobber”)])

(define_insn "" [(match_parallel 0 “pattern_is_ok_for_prologue” [(set (reg:SI 3) (plus:SI (reg:SI 3) (match_operand:SI 1 “immediate_operand” “i”))) (set (mem:SI (plus:SI (reg:SI 3) (match_operand:SI 2 “immediate_operand” “i”))) (match_operand:SI 3 “register_is_ok_for_epilogue” “r”))])] “TARGET_PROLOG_FUNCTION” { return construct_save_jarl (operands[0]); } [(set (attr “length”) (if_then_else (eq_attr “long_calls” “yes”) (const_string “16”) (const_string “4”))) (set_attr “cc” “clobber”)])

;; ;; Actually, turn the RTXs into a DISPOSE instruction. ;; (define_insn "" [(match_parallel 0 “pattern_is_ok_for_dispose” [(return) (set (reg:SI 3) (plus:SI (reg:SI 3) (match_operand:SI 1 “immediate_operand” “i”))) (set (match_operand:SI 2 “register_is_ok_for_epilogue” “=r”) (mem:SI (plus:SI (reg:SI 3) (match_operand:SI 3 “immediate_operand” “i”))))])] “TARGET_PROLOG_FUNCTION && (TARGET_V850E_UP)” { return construct_dispose_instruction (operands[0]); } [(set_attr “length” “4”) (set_attr “cc” “clobber”)])

;; This pattern will match a return RTX followed by any number of pop RTXs ;; and possible a stack adjustment as well. These RTXs will be turned into ;; a suitable call to a worker function.

(define_insn "" [(match_parallel 0 “pattern_is_ok_for_epilogue” [(return) (set (reg:SI 3) (plus:SI (reg:SI 3) (match_operand:SI 1 “immediate_operand” “i”))) (set (match_operand:SI 2 “register_is_ok_for_epilogue” “=r”) (mem:SI (plus:SI (reg:SI 3) (match_operand:SI 3 “immediate_operand” “i”))))])] “TARGET_PROLOG_FUNCTION” { return construct_restore_jr (operands[0]); } [(set (attr “length”) (if_then_else (eq_attr “long_calls” “yes”) (const_string “12”) (const_string “4”))) (set_attr “cc” “clobber”)])

;; Initialize an interrupt function. Do not depend on TARGET_PROLOG_FUNCTION. (define_insn “callt_save_interrupt” [(unspec_volatile [(const_int 0)] 2)] “(TARGET_V850E_UP) && !TARGET_DISABLE_CALLT” ;; The CALLT instruction stores the next address of CALLT to CTPC register ;; without saving its previous value. So if the interrupt handler ;; or its caller could possibly execute the CALLT insn, save_interrupt ;; MUST NOT be called via CALLT. { output_asm_insn (“addi -28, sp, sp”, operands); output_asm_insn (“st.w r1, 24[sp]”, operands); output_asm_insn (“st.w r10, 12[sp]”, operands); output_asm_insn (“st.w r11, 16[sp]”, operands); output_asm_insn (“stsr ctpc, r10”, operands); output_asm_insn (“st.w r10, 20[sp]”, operands); output_asm_insn (“stsr ctpsw, r10”, operands); output_asm_insn (“st.w r10, 24[sp]”, operands); output_asm_insn (“callt ctoff(__callt_save_interrupt)”, operands); return ""; } [(set_attr “length” “26”) (set_attr “cc” “clobber”)])

(define_insn “callt_return_interrupt” [(unspec_volatile [(const_int 0)] 3)] “(TARGET_V850E_UP) && !TARGET_DISABLE_CALLT” “callt ctoff(__callt_return_interrupt)” [(set_attr “length” “2”) (set_attr “cc” “clobber”)])

(define_insn “save_interrupt” [(set (reg:SI 3) (plus:SI (reg:SI 3) (const_int -20))) (set (mem:SI (plus:SI (reg:SI 3) (const_int -20))) (reg:SI 30)) (set (mem:SI (plus:SI (reg:SI 3) (const_int -16))) (reg:SI 4)) (set (mem:SI (plus:SI (reg:SI 3) (const_int -12))) (reg:SI 1)) (set (mem:SI (plus:SI (reg:SI 3) (const_int -8))) (reg:SI 10)) (set (mem:SI (plus:SI (reg:SI 3) (const_int -4))) (reg:SI 11))] "" { if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS) return “addi -20,sp,sp ; st.w r11,16[sp] ; st.w r10,12[sp] ; jarl __save_interrupt,r10”; else { output_asm_insn (“addi -20, sp, sp”, operands); output_asm_insn (“st.w r11, 16[sp]”, operands); output_asm_insn (“st.w r10, 12[sp]”, operands); output_asm_insn (“st.w ep, 0[sp]”, operands); output_asm_insn (“st.w gp, 4[sp]”, operands); output_asm_insn (“st.w r1, 8[sp]”, operands); output_asm_insn (“movhi hi(__ep), r0, ep”, operands); output_asm_insn (“movea lo(__ep), ep, ep”, operands); output_asm_insn (“movhi hi(__gp), r0, gp”, operands); output_asm_insn (“movea lo(__gp), gp, gp”, operands); return ""; } } [(set (attr “length”) (if_then_else (match_test “TARGET_LONG_CALLS”) (const_int 10) (const_int 34))) (set_attr “cc” “clobber”)])

;; Restore r1, r4, r10, and return from the interrupt (define_insn “return_interrupt” [(return) (set (reg:SI 3) (plus:SI (reg:SI 3) (const_int 20))) (set (reg:SI 11) (mem:SI (plus:SI (reg:SI 3) (const_int 16)))) (set (reg:SI 10) (mem:SI (plus:SI (reg:SI 3) (const_int 12)))) (set (reg:SI 1) (mem:SI (plus:SI (reg:SI 3) (const_int 8)))) (set (reg:SI 4) (mem:SI (plus:SI (reg:SI 3) (const_int 4)))) (set (reg:SI 30) (mem:SI (reg:SI 3)))] "" { if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS) return “jr __return_interrupt”; else { output_asm_insn (“ld.w 0[sp], ep”, operands); output_asm_insn (“ld.w 4[sp], gp”, operands); output_asm_insn (“ld.w 8[sp], r1”, operands); output_asm_insn (“ld.w 12[sp], r10”, operands); output_asm_insn (“ld.w 16[sp], r11”, operands); output_asm_insn (“addi 20, sp, sp”, operands); output_asm_insn (“reti”, operands); return ""; } } [(set (attr “length”) (if_then_else (match_test “TARGET_LONG_CALLS”) (const_int 4) (const_int 24))) (set_attr “cc” “clobber”)])

;; Save all registers except for the registers saved in save_interrupt when ;; an interrupt function makes a call. ;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and ;; all of memory. This blocks insns from being moved across this point. ;; This is needed because the rest of the compiler is not ready to handle ;; insns this complicated.

(define_insn “callt_save_all_interrupt” [(unspec_volatile [(const_int 0)] 0)] “(TARGET_V850E_UP) && !TARGET_DISABLE_CALLT” “callt ctoff(__callt_save_all_interrupt)” [(set_attr “length” “2”) (set_attr “cc” “none”)])

(define_insn “save_all_interrupt” [(unspec_volatile [(const_int 0)] 0)] "" { if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS) return “jarl __save_all_interrupt,r10”;

output_asm_insn (“addi -120, sp, sp”, operands);

if (TARGET_EP) { output_asm_insn (“mov ep, r1”, operands); output_asm_insn (“mov sp, ep”, operands); output_asm_insn (“sst.w r31, 116[ep]”, operands); output_asm_insn (“sst.w r2, 112[ep]”, operands); output_asm_insn (“sst.w gp, 108[ep]”, operands); output_asm_insn (“sst.w r6, 104[ep]”, operands); output_asm_insn (“sst.w r7, 100[ep]”, operands); output_asm_insn (“sst.w r8, 96[ep]”, operands); output_asm_insn (“sst.w r9, 92[ep]”, operands); output_asm_insn (“sst.w r11, 88[ep]”, operands); output_asm_insn (“sst.w r12, 84[ep]”, operands); output_asm_insn (“sst.w r13, 80[ep]”, operands); output_asm_insn (“sst.w r14, 76[ep]”, operands); output_asm_insn (“sst.w r15, 72[ep]”, operands); output_asm_insn (“sst.w r16, 68[ep]”, operands); output_asm_insn (“sst.w r17, 64[ep]”, operands); output_asm_insn (“sst.w r18, 60[ep]”, operands); output_asm_insn (“sst.w r19, 56[ep]”, operands); output_asm_insn (“sst.w r20, 52[ep]”, operands); output_asm_insn (“sst.w r21, 48[ep]”, operands); output_asm_insn (“sst.w r22, 44[ep]”, operands); output_asm_insn (“sst.w r23, 40[ep]”, operands); output_asm_insn (“sst.w r24, 36[ep]”, operands); output_asm_insn (“sst.w r25, 32[ep]”, operands); output_asm_insn (“sst.w r26, 28[ep]”, operands); output_asm_insn (“sst.w r27, 24[ep]”, operands); output_asm_insn (“sst.w r28, 20[ep]”, operands); output_asm_insn (“sst.w r29, 16[ep]”, operands); output_asm_insn (“mov r1, ep”, operands); } else { output_asm_insn (“st.w r31, 116[sp]”, operands); output_asm_insn (“st.w r2, 112[sp]”, operands); output_asm_insn (“st.w gp, 108[sp]”, operands); output_asm_insn (“st.w r6, 104[sp]”, operands); output_asm_insn (“st.w r7, 100[sp]”, operands); output_asm_insn (“st.w r8, 96[sp]”, operands); output_asm_insn (“st.w r9, 92[sp]”, operands); output_asm_insn (“st.w r11, 88[sp]”, operands); output_asm_insn (“st.w r12, 84[sp]”, operands); output_asm_insn (“st.w r13, 80[sp]”, operands); output_asm_insn (“st.w r14, 76[sp]”, operands); output_asm_insn (“st.w r15, 72[sp]”, operands); output_asm_insn (“st.w r16, 68[sp]”, operands); output_asm_insn (“st.w r17, 64[sp]”, operands); output_asm_insn (“st.w r18, 60[sp]”, operands); output_asm_insn (“st.w r19, 56[sp]”, operands); output_asm_insn (“st.w r20, 52[sp]”, operands); output_asm_insn (“st.w r21, 48[sp]”, operands); output_asm_insn (“st.w r22, 44[sp]”, operands); output_asm_insn (“st.w r23, 40[sp]”, operands); output_asm_insn (“st.w r24, 36[sp]”, operands); output_asm_insn (“st.w r25, 32[sp]”, operands); output_asm_insn (“st.w r26, 28[sp]”, operands); output_asm_insn (“st.w r27, 24[sp]”, operands); output_asm_insn (“st.w r28, 20[sp]”, operands); output_asm_insn (“st.w r29, 16[sp]”, operands); }

return ""; } [(set (attr “length”) (if_then_else (match_test “TARGET_LONG_CALLS”) (const_int 4) (const_int 62) )) (set_attr “cc” “clobber”)])

(define_insn “_save_all_interrupt” [(unspec_volatile [(const_int 0)] 0)] “TARGET_V850 && ! TARGET_LONG_CALLS” “jarl __save_all_interrupt,r10” [(set_attr “length” “4”) (set_attr “cc” “clobber”)])

;; Restore all registers saved when an interrupt function makes a call. ;; UNSPEC_VOLATILE is considered to use and clobber all hard registers and ;; all of memory. This blocks insns from being moved across this point. ;; This is needed because the rest of the compiler is not ready to handle ;; insns this complicated.

(define_insn “callt_restore_all_interrupt” [(unspec_volatile [(const_int 0)] 1)] “(TARGET_V850E_UP) && !TARGET_DISABLE_CALLT” “callt ctoff(__callt_restore_all_interrupt)” [(set_attr “length” “2”) (set_attr “cc” “none”)])

(define_insn “restore_all_interrupt” [(unspec_volatile [(const_int 0)] 1)] "" { if (TARGET_PROLOG_FUNCTION && !TARGET_LONG_CALLS) return “jarl __restore_all_interrupt,r10”;

if (TARGET_EP) { output_asm_insn (“mov ep, r1”, operands); output_asm_insn (“mov sp, ep”, operands); output_asm_insn (“sld.w 116[ep], r31”, operands); output_asm_insn (“sld.w 112[ep], r2”, operands); output_asm_insn (“sld.w 108[ep], gp”, operands); output_asm_insn (“sld.w 104[ep], r6”, operands); output_asm_insn (“sld.w 100[ep], r7”, operands); output_asm_insn (“sld.w 96[ep], r8”, operands); output_asm_insn (“sld.w 92[ep], r9”, operands); output_asm_insn (“sld.w 88[ep], r11”, operands); output_asm_insn (“sld.w 84[ep], r12”, operands); output_asm_insn (“sld.w 80[ep], r13”, operands); output_asm_insn (“sld.w 76[ep], r14”, operands); output_asm_insn (“sld.w 72[ep], r15”, operands); output_asm_insn (“sld.w 68[ep], r16”, operands); output_asm_insn (“sld.w 64[ep], r17”, operands); output_asm_insn (“sld.w 60[ep], r18”, operands); output_asm_insn (“sld.w 56[ep], r19”, operands); output_asm_insn (“sld.w 52[ep], r20”, operands); output_asm_insn (“sld.w 48[ep], r21”, operands); output_asm_insn (“sld.w 44[ep], r22”, operands); output_asm_insn (“sld.w 40[ep], r23”, operands); output_asm_insn (“sld.w 36[ep], r24”, operands); output_asm_insn (“sld.w 32[ep], r25”, operands); output_asm_insn (“sld.w 28[ep], r26”, operands); output_asm_insn (“sld.w 24[ep], r27”, operands); output_asm_insn (“sld.w 20[ep], r28”, operands); output_asm_insn (“sld.w 16[ep], r29”, operands); output_asm_insn (“mov r1, ep”, operands); } else { output_asm_insn (“ld.w 116[sp], r31”, operands); output_asm_insn (“ld.w 112[sp], r2”, operands); output_asm_insn (“ld.w 108[sp], gp”, operands); output_asm_insn (“ld.w 104[sp], r6”, operands); output_asm_insn (“ld.w 100[sp], r7”, operands); output_asm_insn (“ld.w 96[sp], r8”, operands); output_asm_insn (“ld.w 92[sp], r9”, operands); output_asm_insn (“ld.w 88[sp], r11”, operands); output_asm_insn (“ld.w 84[sp], r12”, operands); output_asm_insn (“ld.w 80[sp], r13”, operands); output_asm_insn (“ld.w 76[sp], r14”, operands); output_asm_insn (“ld.w 72[sp], r15”, operands); output_asm_insn (“ld.w 68[sp], r16”, operands); output_asm_insn (“ld.w 64[sp], r17”, operands); output_asm_insn (“ld.w 60[sp], r18”, operands); output_asm_insn (“ld.w 56[sp], r19”, operands); output_asm_insn (“ld.w 52[sp], r20”, operands); output_asm_insn (“ld.w 48[sp], r21”, operands); output_asm_insn (“ld.w 44[sp], r22”, operands); output_asm_insn (“ld.w 40[sp], r23”, operands); output_asm_insn (“ld.w 36[sp], r24”, operands); output_asm_insn (“ld.w 32[sp], r25”, operands); output_asm_insn (“ld.w 28[sp], r26”, operands); output_asm_insn (“ld.w 24[sp], r27”, operands); output_asm_insn (“ld.w 20[sp], r28”, operands); output_asm_insn (“ld.w 16[sp], r29”, operands); } output_asm_insn (“addi 120, sp, sp”, operands); return ""; } [(set (attr “length”) (if_then_else (match_test “TARGET_LONG_CALLS”) (const_int 4) (const_int 62) )) (set_attr “cc” “clobber”)])

(define_insn “_restore_all_interrupt” [(unspec_volatile [(const_int 0)] 1)] “TARGET_V850 && ! TARGET_LONG_CALLS” “jarl __restore_all_interrupt,r10” [(set_attr “length” “4”) (set_attr “cc” “clobber”)])