gcc/jit/Make-lang.in - gcc - Git at Google

 # Top level -*- makefile -*- fragment for libgccjit.so.
 #   Copyright (C) 2013-2015 Free Software Foundation, Inc.

 #This file is part of GCC.

 #GCC is free software; you can redistribute it and/or modify
 #it under the terms of the GNU General Public License as published by
 #the Free Software Foundation; either version 3, or (at your option)
 #any later version.

 #GCC is distributed in the hope that it will be useful,
 #but WITHOUT ANY WARRANTY; without even the implied warranty of
 #MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 #GNU General Public License for more details.

 # You should have received a copy of the GNU General Public License
 # along with GCC; see the file COPYING3.  If not see
 # <http://www.gnu.org/licenses/>.

 # This file provides the language dependent support in the main Makefile.
 # Each language makefile fragment must provide the following targets:
 #
 # foo.all.cross, foo.start.encap, foo.rest.encap,
 # foo.install-common, foo.install-man, foo.install-info, foo.install-pdf,
 # foo.install-html, foo.info, foo.dvi, foo.pdf, foo.html, foo.uninstall,
 # foo.mostlyclean, foo.clean, foo.distclean,
 # foo.maintainer-clean, foo.stage1, foo.stage2, foo.stage3, foo.stage4
 #
 # where `foo' is the name of the language.
 #
 # It should also provide rules for:
 #
 # - making any compiler driver (eg: g++)
 # - the compiler proper (eg: cc1plus)
 # - define the names for selecting the language in LANGUAGES.

 #
 # Define the names for selecting jit in LANGUAGES.
 # Note that it would be nice to move the dependency on g++
 # into the jit rule, but that needs a little bit of work
 # to do the right thing within all.cross.

 LIBGCCJIT_LINKER_NAME = libgccjit.so
 LIBGCCJIT_VERSION_NUM = 0
 LIBGCCJIT_MINOR_NUM = 0
 LIBGCCJIT_RELEASE_NUM = 1
 LIBGCCJIT_SONAME = $(LIBGCCJIT_LINKER_NAME).$(LIBGCCJIT_VERSION_NUM)
 LIBGCCJIT_FILENAME = \
   $(LIBGCCJIT_SONAME).$(LIBGCCJIT_MINOR_NUM).$(LIBGCCJIT_RELEASE_NUM)

 LIBGCCJIT_LINKER_NAME_SYMLINK = $(LIBGCCJIT_LINKER_NAME)
 LIBGCCJIT_SONAME_SYMLINK = $(LIBGCCJIT_SONAME)

 jit: $(LIBGCCJIT_FILENAME) \
 	$(LIBGCCJIT_SYMLINK) \
 	$(LIBGCCJIT_LINKER_NAME_SYMLINK) \
 	$(FULL_DRIVER_NAME)

 # Tell GNU make to ignore these if they exist.
 .PHONY: jit

 jit_OBJS = attribs.o \
 	jit/dummy-frontend.o \
 	jit/libgccjit.o \
 	jit/jit-logging.o \
 	jit/jit-recording.o \
 	jit/jit-playback.o \
 	jit/jit-result.o \
 	jit/jit-tempdir.o \
 	jit/jit-builtins.o \
 	jit/jit-spec.o \
 	gcc.o

 # Use strict warnings for this front end.
 jit-warn = $(STRICT_WARN)

 # We avoid using $(BACKEND) from Makefile.in in order to avoid pulling
 # in main.o
 $(LIBGCCJIT_FILENAME): $(jit_OBJS) \
 	libbackend.a libcommon-target.a libcommon.a \
 	$(CPPLIB) $(LIBDECNUMBER) \
 	$(LIBDEPS) $(srcdir)/jit/libgccjit.map \
 	$(EXTRA_GCC_OBJS)
 	+$(LLINKER) $(ALL_LINKERFLAGS) $(LDFLAGS) -o $@ -shared \
 	     $(jit_OBJS) libbackend.a libcommon-target.a libcommon.a \
 	     $(CPPLIB) $(LIBDECNUMBER) $(LIBS) $(BACKENDLIBS) \
 	     $(EXTRA_GCC_OBJS) \
 	     -Wl,--version-script=$(srcdir)/jit/libgccjit.map \
 	     -Wl,-soname,$(LIBGCCJIT_SONAME)

 $(LIBGCCJIT_SONAME_SYMLINK): $(LIBGCCJIT_FILENAME)
 	ln -sf $(LIBGCCJIT_FILENAME) $(LIBGCCJIT_SONAME_SYMLINK)

 $(LIBGCCJIT_LINKER_NAME_SYMLINK): $(LIBGCCJIT_SONAME_SYMLINK)
 	ln -sf $(LIBGCCJIT_SONAME_SYMLINK) $(LIBGCCJIT_LINKER_NAME_SYMLINK)

 #
 # Build hooks:

 jit.all.cross:
 jit.start.encap:
 jit.rest.encap:

 # Documentation build hooks.
 #
 # The documentation can be built using the texinfo toolchain, or
 # the sphinx toolchain
 #
 # The jit documentation is authored using Sphinx, which has numerous
 # advantages over Texinfo, including:
 #
 #   * much faster
 #
 #   * use of CSS and JS to provide less of a 1990s feel in the generated
 #     HTML.
 #
 #   * sane, stable HTML page and anchor names
 #
 #   * sane HTML navigation: ability to move forward and back in the HTML
 #     at every node to read the HTML like a book
 #
 #   * syntax-coloring of examples
 #
 #   * the ability to "include" fragments of code inline.  This is used
 #     heavily by the jit docs, so that the example code is shared by both
 #     the test suite and the documentation to ensure that the examples
 #     appearing in the docs actually compile and work
 #
 # Sphinx is not a "blessed" dependency, and so a prebuilt libgccjit.texinfo
 # file built by Sphinx is checked into the source tree to avoid requiring
 # everyone to have Sphinx installed.
 #
 # This prebuilt libgccjit.texinfo has the "include" fragments "baked in",
 # and so contains the content from the sphinx toolchain, but lacks the
 # syntax-coloring, and the generated HTML is (IMHO) greatly inferior to
 # that generated by Sphinx.

 # These targets redirect HTML creation and installation to either
 # jit.sphinx.(install-)html or jit.texinfo.(install-)html.
 jit.html: jit.$(doc_build_sys).html
 jit.install-html: jit.$(doc_build_sys).install-html

 # For now, use texinfo for pdf, since the sphinx latex toolchain currently
 # fails for me deep inside pdflatex (see notes below)
 jit.pdf: jit.texinfo.pdf
 jit.install-pdf: jit.texinfo.install-pdf

 # Hooks for building docs using texinfo
 JIT_TEXI_FILES = $(srcdir)/jit/docs/_build/texinfo/libgccjit.texi

 jit.info: doc/libgccjit.info
 doc/libgccjit.info: $(JIT_TEXI_FILES)
 	if test "x$(BUILD_INFO)" = xinfo; then \
 	  rm -f doc/libgccjit.info*; \
 	  $(MAKEINFO) $(MAKEINFOFLAGS) -I $(gcc_docdir) \
 		-I $(gcc_docdir)/include -o $@ $<; \
 	else true; fi

 jit.install-info: $(DESTDIR)$(infodir)/libgccjit.info

 jit.dvi: doc/libgccjit.dvi
 doc/libgccjit.dvi: $(JIT_TEXI_FILES)
 	$(TEXI2DVI) -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $<

 jit.texinfo.html: $(build_htmldir)/jit/index.html

 $(build_htmldir)/jit/index.html: $(srcdir)/jit/docs/_build/texinfo/libgccjit.texi
 	$(mkinstalldirs) $(@D)
 	rm -f $(@D)/*
 	$(TEXI2HTML) -I $(gcc_docdir)/include -I $(srcdir)/jit -o $(@D) $<

 jit.texinfo.install-html: jit.texinfo.html
 	@$(NORMAL_INSTALL)
 	test -z "$(htmldir)" || $(mkinstalldirs) "$(DESTDIR)$(htmldir)"
 	@for p in $(build_htmldir)/jit; do \
 	  if test -f "$$p" || test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
 	  f=$(html__strip_dir) \
 	  if test -d "$$d$$p"; then \
 	    echo " $(mkinstalldirs) '$(DESTDIR)$(htmldir)/$$f'"; \
 	    $(mkinstalldirs) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
 	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
 	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
 	  else \
 	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
 	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
 	  fi; \
 	done

 jit.texinfo.pdf: doc/libgccjit.pdf

 doc/libgccjit.pdf: $(JIT_TEXI_FILES)
 	$(TEXI2PDF) -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $<

 jit.texinfo.install-pdf: doc/libgccjit.pdf
 	@$(NORMAL_INSTALL)
 	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)/gcc"
 	@for p in doc/libgccjit.pdf; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(pdf__strip_dir) \
 	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/gcc/$$f'"; \
 	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/gcc/$$f"; \
 	done

 # Hooks for building docs using the Sphinx toolchain:

 SPHINX_BUILD_DIR=jit/sphinx-build

 jit.sphinx.html:
 	mkdir -p $(SPHINX_BUILD_DIR)
 	(cd $(srcdir)/jit/docs && \
 	  make html BUILDDIR=$(PWD)/$(SPHINX_BUILD_DIR) )

 jit_htmldir=$(htmldir)/jit

 jit.sphinx.install-html: jit.sphinx.html
 	@$(NORMAL_INSTALL)
 	test -z "$(jit_htmldir)" || $(mkinstalldirs) "$(DESTDIR)$(jit_htmldir)"
 	@for f in $(shell cd $(SPHINX_BUILD_DIR)/html && find) ; do \
 	  if test -f $(SPHINX_BUILD_DIR)/html/"$$f"; then \
 	     $(INSTALL_DATA) $(SPHINX_BUILD_DIR)/html/"$$f" $(DESTDIR)$(jit_htmldir)/"$$f"; \
 	  else \
 	     mkdir $(DESTDIR)$(jit_htmldir)/"$$f"; \
 	  fi; \
 	done

 # (This one is currently failing deep inside pdflatex for me;
 # see https://bugzilla.redhat.com/show_bug.cgi?id=1148845 )
 jit.sphinx.pdf: $(SPHINX_BUILD_DIR)/latex/libgccjit.pdf
 $(SPHINX_BUILD_DIR)/latex/libgccjit.pdf:
 	mkdir -p $(SPHINX_BUILD_DIR)
 	(cd $(srcdir)/jit/docs && \
 	  make latexpdf BUILDDIR=$(PWD)/$(SPHINX_BUILD_DIR) )

 jit.sphinx.install-pdf: $(SPHINX_BUILD_DIR)/latex/libgccjit.pdf
 	@$(NORMAL_INSTALL)
 	test -z "$(pdfdir)" || $(mkinstalldirs) "$(DESTDIR)$(pdfdir)/gcc"
 	@for p in $(SPHINX_BUILD_DIR)/latex/libgccjit.pdf; do \
 	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
 	  f=$(pdf__strip_dir) \
 	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/gcc/$$f'"; \
 	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/gcc/$$f"; \
 	done

 jit.srcinfo:
 jit.srcextra:

 jit.tags:

 jit.man:

 jit.srcman:

 lang_checks += check-jit
 lang_checks_parallelized += check-jit
 # This number is somewhat arbitrary.  Two tests are much slower
 # than all the others (test-combination.c and test-threads.c) so
 # we want them to be placed in different "buckets".
 check_jit_parallelize = 10

 #
 # Install hooks:
 jit.install-common: installdirs
 	$(INSTALL_PROGRAM) $(LIBGCCJIT_FILENAME) \
 	  $(DESTDIR)/$(libdir)/$(LIBGCCJIT_FILENAME)
 	ln -sf \
 	  $(LIBGCCJIT_FILENAME) \
 	  $(DESTDIR)/$(libdir)/$(LIBGCCJIT_SONAME_SYMLINK)
 	ln -sf \
 	  $(LIBGCCJIT_SONAME_SYMLINK)\
 	  $(DESTDIR)/$(libdir)/$(LIBGCCJIT_LINKER_NAME_SYMLINK)
 	$(INSTALL_DATA) $(srcdir)/jit/libgccjit.h \
 	  $(DESTDIR)/$(includedir)/libgccjit.h
 	$(INSTALL_DATA) $(srcdir)/jit/libgccjit++.h \
 	  $(DESTDIR)/$(includedir)/libgccjit++.h

 jit.install-man:

 jit.install-plugin:

 jit.uninstall:

 #
 # Clean hooks:
 # A lot of the ancillary files are deleted by the main makefile.
 # We just have to delete files specific to us.

 jit.mostlyclean:

 jit.clean:

 jit.distclean:

 jit.maintainer-clean:

 #
 # Stage hooks:
 # The main makefile has already created stage?/jit.

 jit.stage1: stage1-start
 	-mv jit/*$(objext) stage1/jit
 jit.stage2: stage2-start
 	-mv jit/*$(objext) stage2/jit
 jit.stage3: stage3-start
 	-mv jit/*$(objext) stage3/jit
 jit.stage4: stage4-start
 	-mv jit/*$(objext) stage4/jit
 jit.stageprofile: stageprofile-start
 	-mv jit/*$(objext) stageprofile/jit
 jit.stagefeedback: stagefeedback-start
 	-mv jit/*$(objext) stagefeedback/jit
	# Top level -- makefile -- fragment for libgccjit.so.
	# Copyright (C) 2013-2015 Free Software Foundation, Inc.

	#This file is part of GCC.

	#GCC is free software; you can redistribute it and/or modify
	#it under the terms of the GNU General Public License as published by
	#the Free Software Foundation; either version 3, or (at your option)
	#any later version.

	#GCC is distributed in the hope that it will be useful,
	#but WITHOUT ANY WARRANTY; without even the implied warranty of
	#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	#GNU General Public License for more details.

	# You should have received a copy of the GNU General Public License
	# along with GCC; see the file COPYING3. If not see
	# <http://www.gnu.org/licenses/>.

	# This file provides the language dependent support in the main Makefile.
	# Each language makefile fragment must provide the following targets:
	#
	# foo.all.cross, foo.start.encap, foo.rest.encap,
	# foo.install-common, foo.install-man, foo.install-info, foo.install-pdf,
	# foo.install-html, foo.info, foo.dvi, foo.pdf, foo.html, foo.uninstall,
	# foo.mostlyclean, foo.clean, foo.distclean,
	# foo.maintainer-clean, foo.stage1, foo.stage2, foo.stage3, foo.stage4
	#
	# where `foo' is the name of the language.
	#
	# It should also provide rules for:
	#
	# - making any compiler driver (eg: g++)
	# - the compiler proper (eg: cc1plus)
	# - define the names for selecting the language in LANGUAGES.

	#
	# Define the names for selecting jit in LANGUAGES.
	# Note that it would be nice to move the dependency on g++
	# into the jit rule, but that needs a little bit of work
	# to do the right thing within all.cross.

	LIBGCCJIT_LINKER_NAME = libgccjit.so
	LIBGCCJIT_VERSION_NUM = 0
	LIBGCCJIT_MINOR_NUM = 0
	LIBGCCJIT_RELEASE_NUM = 1
	LIBGCCJIT_SONAME = $(LIBGCCJIT_LINKER_NAME).$(LIBGCCJIT_VERSION_NUM)
	LIBGCCJIT_FILENAME = \
	$(LIBGCCJIT_SONAME).$(LIBGCCJIT_MINOR_NUM).$(LIBGCCJIT_RELEASE_NUM)

	LIBGCCJIT_LINKER_NAME_SYMLINK = $(LIBGCCJIT_LINKER_NAME)
	LIBGCCJIT_SONAME_SYMLINK = $(LIBGCCJIT_SONAME)

	jit: $(LIBGCCJIT_FILENAME) \
	$(LIBGCCJIT_SYMLINK) \
	$(LIBGCCJIT_LINKER_NAME_SYMLINK) \
	$(FULL_DRIVER_NAME)

	# Tell GNU make to ignore these if they exist.
	.PHONY: jit

	jit_OBJS = attribs.o \
	jit/dummy-frontend.o \
	jit/libgccjit.o \
	jit/jit-logging.o \
	jit/jit-recording.o \
	jit/jit-playback.o \
	jit/jit-result.o \
	jit/jit-tempdir.o \
	jit/jit-builtins.o \
	jit/jit-spec.o \
	gcc.o

	# Use strict warnings for this front end.
	jit-warn = $(STRICT_WARN)

	# We avoid using $(BACKEND) from Makefile.in in order to avoid pulling
	# in main.o
	$(LIBGCCJIT_FILENAME): $(jit_OBJS) \
	libbackend.a libcommon-target.a libcommon.a \
	$(CPPLIB) $(LIBDECNUMBER) \
	$(LIBDEPS) $(srcdir)/jit/libgccjit.map \
	$(EXTRA_GCC_OBJS)
	+$(LLINKER) $(ALL_LINKERFLAGS) $(LDFLAGS) -o $@ -shared \
	$(jit_OBJS) libbackend.a libcommon-target.a libcommon.a \
	$(CPPLIB) $(LIBDECNUMBER) $(LIBS) $(BACKENDLIBS) \
	$(EXTRA_GCC_OBJS) \
	-Wl,--version-script=$(srcdir)/jit/libgccjit.map \
	-Wl,-soname,$(LIBGCCJIT_SONAME)

	$(LIBGCCJIT_SONAME_SYMLINK): $(LIBGCCJIT_FILENAME)
	ln -sf $(LIBGCCJIT_FILENAME) $(LIBGCCJIT_SONAME_SYMLINK)

	$(LIBGCCJIT_LINKER_NAME_SYMLINK): $(LIBGCCJIT_SONAME_SYMLINK)
	ln -sf $(LIBGCCJIT_SONAME_SYMLINK) $(LIBGCCJIT_LINKER_NAME_SYMLINK)

	#
	# Build hooks:

	jit.all.cross:
	jit.start.encap:
	jit.rest.encap:

	# Documentation build hooks.
	#
	# The documentation can be built using the texinfo toolchain, or
	# the sphinx toolchain
	#
	# The jit documentation is authored using Sphinx, which has numerous
	# advantages over Texinfo, including:
	#
	# * much faster
	#
	# * use of CSS and JS to provide less of a 1990s feel in the generated
	# HTML.
	#
	# * sane, stable HTML page and anchor names
	#
	# * sane HTML navigation: ability to move forward and back in the HTML
	# at every node to read the HTML like a book
	#
	# * syntax-coloring of examples
	#
	# * the ability to "include" fragments of code inline. This is used
	# heavily by the jit docs, so that the example code is shared by both
	# the test suite and the documentation to ensure that the examples
	# appearing in the docs actually compile and work
	#
	# Sphinx is not a "blessed" dependency, and so a prebuilt libgccjit.texinfo
	# file built by Sphinx is checked into the source tree to avoid requiring
	# everyone to have Sphinx installed.
	#
	# This prebuilt libgccjit.texinfo has the "include" fragments "baked in",
	# and so contains the content from the sphinx toolchain, but lacks the
	# syntax-coloring, and the generated HTML is (IMHO) greatly inferior to
	# that generated by Sphinx.

	# These targets redirect HTML creation and installation to either
	# jit.sphinx.(install-)html or jit.texinfo.(install-)html.
	jit.html: jit.$(doc_build_sys).html
	jit.install-html: jit.$(doc_build_sys).install-html

	# For now, use texinfo for pdf, since the sphinx latex toolchain currently
	# fails for me deep inside pdflatex (see notes below)
	jit.pdf: jit.texinfo.pdf
	jit.install-pdf: jit.texinfo.install-pdf

	# Hooks for building docs using texinfo
	JIT_TEXI_FILES = $(srcdir)/jit/docs/_build/texinfo/libgccjit.texi

	jit.info: doc/libgccjit.info
	doc/libgccjit.info: $(JIT_TEXI_FILES)
	if test "x$(BUILD_INFO)" = xinfo; then \
	rm -f doc/libgccjit.info*; \
	$(MAKEINFO) $(MAKEINFOFLAGS) -I $(gcc_docdir) \
	-I $(gcc_docdir)/include -o $@ $<; \
	else true; fi

	jit.install-info: $(DESTDIR)$(infodir)/libgccjit.info

	jit.dvi: doc/libgccjit.dvi
	doc/libgccjit.dvi: $(JIT_TEXI_FILES)
	$(TEXI2DVI) -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $<

	jit.texinfo.html: $(build_htmldir)/jit/index.html

	$(build_htmldir)/jit/index.html: $(srcdir)/jit/docs/_build/texinfo/libgccjit.texi
	$(mkinstalldirs) $(@D)
	rm -f $(@D)/*
	$(TEXI2HTML) -I $(gcc_docdir)/include -I $(srcdir)/jit -o $(@D) $<

	jit.texinfo.install-html: jit.texinfo.html
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" \|\| $(mkinstalldirs) "$(DESTDIR)$(htmldir)"
	@for p in $(build_htmldir)/jit; do \
	if test -f "$$p" \|\| test -d "$$p"; then d=""; else d="$(srcdir)/"; fi; \
	f=$(html__strip_dir) \
	if test -d "$$d$$p"; then \
	echo " $(mkinstalldirs) '$(DESTDIR)$(htmldir)/$$f'"; \
	$(mkinstalldirs) "$(DESTDIR)$(htmldir)/$$f" \|\| exit 1; \
	echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	$(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
	else \
	echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
	$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
	fi; \
	done

	jit.texinfo.pdf: doc/libgccjit.pdf

	doc/libgccjit.pdf: $(JIT_TEXI_FILES)
	$(TEXI2PDF) -I $(abs_docdir) -I $(abs_docdir)/include -o $@ $<

	jit.texinfo.install-pdf: doc/libgccjit.pdf
	@$(NORMAL_INSTALL)
	test -z "$(pdfdir)" \|\| $(mkinstalldirs) "$(DESTDIR)$(pdfdir)/gcc"
	@for p in doc/libgccjit.pdf; do \
	if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	f=$(pdf__strip_dir) \
	echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/gcc/$$f'"; \
	$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/gcc/$$f"; \
	done

	# Hooks for building docs using the Sphinx toolchain:

	SPHINX_BUILD_DIR=jit/sphinx-build

	jit.sphinx.html:
	mkdir -p $(SPHINX_BUILD_DIR)
	(cd $(srcdir)/jit/docs && \
	make html BUILDDIR=$(PWD)/$(SPHINX_BUILD_DIR) )

	jit_htmldir=$(htmldir)/jit

	jit.sphinx.install-html: jit.sphinx.html
	@$(NORMAL_INSTALL)
	test -z "$(jit_htmldir)" \|\| $(mkinstalldirs) "$(DESTDIR)$(jit_htmldir)"
	@for f in $(shell cd $(SPHINX_BUILD_DIR)/html && find) ; do \
	if test -f $(SPHINX_BUILD_DIR)/html/"$$f"; then \
	$(INSTALL_DATA) $(SPHINX_BUILD_DIR)/html/"$$f" $(DESTDIR)$(jit_htmldir)/"$$f"; \
	else \
	mkdir $(DESTDIR)$(jit_htmldir)/"$$f"; \
	fi; \
	done

	# (This one is currently failing deep inside pdflatex for me;
	# see https://bugzilla.redhat.com/show_bug.cgi?id=1148845 )
	jit.sphinx.pdf: $(SPHINX_BUILD_DIR)/latex/libgccjit.pdf
	$(SPHINX_BUILD_DIR)/latex/libgccjit.pdf:
	mkdir -p $(SPHINX_BUILD_DIR)
	(cd $(srcdir)/jit/docs && \
	make latexpdf BUILDDIR=$(PWD)/$(SPHINX_BUILD_DIR) )

	jit.sphinx.install-pdf: $(SPHINX_BUILD_DIR)/latex/libgccjit.pdf
	@$(NORMAL_INSTALL)
	test -z "$(pdfdir)" \|\| $(mkinstalldirs) "$(DESTDIR)$(pdfdir)/gcc"
	@for p in $(SPHINX_BUILD_DIR)/latex/libgccjit.pdf; do \
	if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	f=$(pdf__strip_dir) \
	echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/gcc/$$f'"; \
	$(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/gcc/$$f"; \
	done

	jit.srcinfo:
	jit.srcextra:

	jit.tags:

	jit.man:

	jit.srcman:

	lang_checks += check-jit
	lang_checks_parallelized += check-jit
	# This number is somewhat arbitrary. Two tests are much slower
	# than all the others (test-combination.c and test-threads.c) so
	# we want them to be placed in different "buckets".
	check_jit_parallelize = 10

	#
	# Install hooks:
	jit.install-common: installdirs
	$(INSTALL_PROGRAM) $(LIBGCCJIT_FILENAME) \
	$(DESTDIR)/$(libdir)/$(LIBGCCJIT_FILENAME)
	ln -sf \
	$(LIBGCCJIT_FILENAME) \
	$(DESTDIR)/$(libdir)/$(LIBGCCJIT_SONAME_SYMLINK)
	ln -sf \
	$(LIBGCCJIT_SONAME_SYMLINK)\
	$(DESTDIR)/$(libdir)/$(LIBGCCJIT_LINKER_NAME_SYMLINK)
	$(INSTALL_DATA) $(srcdir)/jit/libgccjit.h \
	$(DESTDIR)/$(includedir)/libgccjit.h
	$(INSTALL_DATA) $(srcdir)/jit/libgccjit++.h \
	$(DESTDIR)/$(includedir)/libgccjit++.h

	jit.install-man:

	jit.install-plugin:

	jit.uninstall:

	#
	# Clean hooks:
	# A lot of the ancillary files are deleted by the main makefile.
	# We just have to delete files specific to us.

	jit.mostlyclean:

	jit.clean:

	jit.distclean:

	jit.maintainer-clean:

	#
	# Stage hooks:
	# The main makefile has already created stage?/jit.

	jit.stage1: stage1-start
	-mv jit/*$(objext) stage1/jit
	jit.stage2: stage2-start
	-mv jit/*$(objext) stage2/jit
	jit.stage3: stage3-start
	-mv jit/*$(objext) stage3/jit
	jit.stage4: stage4-start
	-mv jit/*$(objext) stage4/jit
	jit.stageprofile: stageprofile-start
	-mv jit/*$(objext) stageprofile/jit
	jit.stagefeedback: stagefeedback-start
	-mv jit/*$(objext) stagefeedback/jit