| /* Definitions of target machine for GNU compiler. Tahoe version. |
| Copyright (C) 1989, 1993, 1994, 1995, 1996 Free Software Foundation, Inc. |
| |
| This file is part of GNU CC. |
| |
| GNU CC is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2, or (at your option) |
| any later version. |
| |
| GNU CC is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with GNU CC; see the file COPYING. If not, write to |
| the Free Software Foundation, 59 Temple Place - Suite 330, |
| Boston, MA 02111-1307, USA. */ |
| |
| /* |
| * Original port made at the University of Buffalo by Devon Bowen, |
| * Dale Wiles and Kevin Zachmann. |
| * |
| * HCX/UX version by Piet van Oostrum (piet@cs.ruu.nl) |
| * |
| * Performance hacking by Michael Tiemann (tiemann@cygnus.com) |
| */ |
| |
| /* define this for the HCX/UX version */ |
| |
| /* #define HCX_UX */ |
| |
| /* |
| * Run-time Target Specification |
| */ |
| |
| #ifdef HCX_UX |
| /* no predefines, see Makefile and hcx-universe.c */ |
| /* have cc1 print that this is the hcx version */ |
| #define TARGET_VERSION printf (" (hcx)"); |
| #else |
| /* we want "tahoe" and "unix" defined for all future compilations */ |
| #define CPP_PREDEFINES "-Dtahoe -Dunix -Asystem(unix) -Acpu(tahoe) -Amachine(tahoe)" |
| /* have cc1 print that this is the tahoe version */ |
| #define TARGET_VERSION printf (" (tahoe)"); |
| #endif |
| |
| /* this is required in all tm files to hold flags */ |
| |
| extern int target_flags; |
| |
| /* Zero if it is safe to output .dfloat and .float pseudos. */ |
| #define TARGET_HEX_FLOAT (target_flags & 1) |
| |
| #define TARGET_DEFAULT 1 |
| |
| #define TARGET_SWITCHES \ |
| { {"hex-float", 1}, \ |
| {"no-hex-float", -1}, \ |
| { "", TARGET_DEFAULT} } |
| |
| |
| /* |
| * Storage Layout |
| */ |
| |
| /* This symbol was previously not mentioned, so apparently the tahoe |
| is little-endian for bits, or else doesn't care. */ |
| #define BITS_BIG_ENDIAN 0 |
| |
| /* tahoe uses a big endian byte order */ |
| |
| #define BYTES_BIG_ENDIAN 1 |
| |
| /* tahoe uses a big endian word order */ |
| |
| #define WORDS_BIG_ENDIAN 1 |
| |
| /* standard byte size is usable on tahoe */ |
| |
| #define BITS_PER_UNIT 8 |
| |
| /* longs on the tahoe are 4 byte groups */ |
| |
| #define BITS_PER_WORD 32 |
| |
| /* from the last two params we get 4 bytes per word */ |
| |
| #define UNITS_PER_WORD 4 |
| |
| /* addresses are 32 bits (one word) */ |
| |
| #define POINTER_SIZE 32 |
| |
| /* all parameters line up on 32 boundaries */ |
| |
| #define PARM_BOUNDARY 32 |
| |
| /* stack should line up on 32 boundaries */ |
| |
| #define STACK_BOUNDARY 32 |
| |
| /* line functions up on 32 bits */ |
| |
| #define FUNCTION_BOUNDARY 32 |
| |
| /* the biggest alignment the tahoe needs in 32 bits */ |
| |
| #define BIGGEST_ALIGNMENT 32 |
| |
| /* we have to align after an 'int : 0' in a structure */ |
| |
| #define EMPTY_FIELD_BOUNDARY 32 |
| |
| #ifdef HCX_UX |
| /* structures must be made of full words */ |
| |
| #define STRUCTURE_SIZE_BOUNDARY 32 |
| #else |
| /* structures must be made of full bytes */ |
| |
| #define STRUCTURE_SIZE_BOUNDARY 8 |
| #endif |
| |
| /* tahoe is picky about data alignment */ |
| |
| #define STRICT_ALIGNMENT 1 |
| |
| /* keep things standard with pcc */ |
| |
| #define PCC_BITFIELD_TYPE_MATTERS 1 |
| |
| /* this section is borrowed from the vax version since the */ |
| /* formats are the same in both of the architectures */ |
| |
| #define CHECK_FLOAT_VALUE(MODE, D, OVERFLOW) \ |
| if (OVERFLOW) \ |
| (D) = 1.7014117331926443e+38; \ |
| else if ((MODE) == SFmode) \ |
| { \ |
| if ((D) > 1.7014117331926443e+38) \ |
| (OVERFLOW) = 1, (D) = 1.7014117331926443e+38; \ |
| else if ((D) < -1.7014117331926443e+38) \ |
| (OVERFLOW) = 1, (D) = -1.7014117331926443e+38; \ |
| else if (((D) > 0) && ((D) < 2.9387358770557188e-39)) \ |
| (OVERFLOW) = 1, (D) = 0.0; \ |
| else if (((D) < 0) && ((D) > -2.9387358770557188e-39)) \ |
| (OVERFLOW) = 1, (D) = 0.0; \ |
| } |
| |
| |
| /* |
| * Register Usage |
| */ |
| |
| /* define 15 general regs plus one for the floating point reg (FPP) */ |
| |
| #define FIRST_PSEUDO_REGISTER 17 |
| |
| /* let the compiler know what the fp, sp and pc are */ |
| |
| #define FIXED_REGISTERS {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0} |
| |
| /* lots of regs aren't guaranteed to return from a call. The FPP reg */ |
| /* must be included in these since it can't be saved by the reg mask */ |
| |
| #define CALL_USED_REGISTERS {1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 1} |
| |
| /* A single fp reg can handle any type of float. |
| CPU regs hold just 32 bits. */ |
| |
| #define HARD_REGNO_NREGS(REGNO, MODE) \ |
| (REGNO != 16 ? ((GET_MODE_SIZE(MODE)+UNITS_PER_WORD-1) / UNITS_PER_WORD) \ |
| : GET_MODE_NUNITS ((MODE))) |
| |
| /* any mode greater than 4 bytes (doubles) can only go in an even regs */ |
| /* and the FPP can only hold SFmode and DFmode */ |
| |
| #define HARD_REGNO_MODE_OK(REGNO, MODE) \ |
| (REGNO != 16 \ |
| ? (GET_MODE_UNIT_SIZE (MODE) <= 4 ? 1 : (REGNO % 2 - 1)) \ |
| : ((MODE) == SFmode || (MODE) == DFmode \ |
| || (MODE) == SCmode || (MODE) == DCmode)) |
| |
| /* if mode1 or mode2, but not both, are doubles then modes cannot be tied */ |
| |
| #define MODES_TIEABLE_P(MODE1, MODE2) \ |
| (((MODE1) == DFmode || (MODE1) == DCmode) \ |
| == ((MODE2) == DFmode || (MODE2) == DCmode)) |
| |
| /* return nonzero if register variable of mode MODE is not |
| a priori a bad idea. Used only if defined. */ |
| #define MODE_OK_FOR_USERVAR(MODE) \ |
| ((MODE) == SImode) |
| |
| /* the program counter is reg 15 */ |
| |
| #define PC_REGNUM 15 |
| |
| /* the stack pointer is reg 14 */ |
| |
| #define STACK_POINTER_REGNUM 14 |
| |
| /* the frame pointer is reg 13 */ |
| |
| #define FRAME_POINTER_REGNUM 13 |
| |
| /* tahoe does require an fp */ |
| |
| #define FRAME_POINTER_REQUIRED 1 |
| |
| /* since tahoe doesn't have a argument pointer, make it the fp */ |
| |
| #define ARG_POINTER_REGNUM 13 |
| |
| /* this isn't currently used since C doesn't support this feature */ |
| |
| #define STATIC_CHAIN_REGNUM 0 |
| |
| /* we'll use reg 1 for structure passing cause the destination */ |
| /* of the eventual movblk requires it to be there anyway. */ |
| |
| #define STRUCT_VALUE_REGNUM 1 |
| |
| |
| /* |
| * Register Classes |
| */ |
| |
| /* tahoe has two types of regs. GENERAL_REGS are all the regs up */ |
| /* to number 15. FPP_REG is the special floating point processor */ |
| /* register class (only one reg). */ |
| |
| enum reg_class {NO_REGS,GENERAL_REGS,FPP_REG,ALL_REGS,LIM_REG_CLASSES}; |
| |
| /* defines the number of reg classes. */ |
| |
| #define N_REG_CLASSES (int) LIM_REG_CLASSES |
| |
| /* this defines what the classes are officially named for debugging */ |
| |
| #define REG_CLASS_NAMES \ |
| {"NO_REGS","GENERAL_REGS","FPP_REG","ALL_REGS"} |
| |
| /* set general regs to be the first 16 regs and the fpp reg to be 17th */ |
| |
| #define REG_CLASS_CONTENTS {0,0xffff,0x10000,0x1ffff} |
| |
| /* register class for the fpp reg is FPP_REG, all others are GENERAL_REGS */ |
| |
| #define REGNO_REG_CLASS(REGNO) (REGNO == 16 ? FPP_REG : GENERAL_REGS) |
| |
| /* only general registers can be used as a base reg */ |
| |
| #define BASE_REG_CLASS GENERAL_REGS |
| |
| /* only general registers can be used to index */ |
| |
| #define INDEX_REG_CLASS GENERAL_REGS |
| |
| /* 'a' as a constraint in the md file means the FFP_REG class */ |
| |
| #define REG_CLASS_FROM_LETTER(C) (C == 'a' ? FPP_REG : NO_REGS) |
| |
| /* any general reg but the fpp can be a base reg */ |
| |
| #define REGNO_OK_FOR_BASE_P(regno) \ |
| ((regno) < FIRST_PSEUDO_REGISTER - 1 || reg_renumber[regno] >= 0) |
| |
| /* any general reg except the pc and fpp can be an index reg */ |
| |
| #define REGNO_OK_FOR_INDEX_P(regno) \ |
| ((regno) < FIRST_PSEUDO_REGISTER - 2 || reg_renumber[regno] >= 0) |
| |
| /* if your loading a floating point constant, it can't be done */ |
| /* through a register. Force it to be a memory constant. */ |
| |
| #define PREFERRED_RELOAD_CLASS(X,CLASS) \ |
| ((GET_CODE (X) == CONST_DOUBLE) ? NO_REGS : CLASS) |
| |
| /* for the fpp reg, all modes fit; for any others, you need two for doubles */ |
| |
| #define CLASS_MAX_NREGS(CLASS, MODE) \ |
| (CLASS != FPP_REG ? ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) : 1) |
| |
| /* we don't define any special constant sizes so all should fail */ |
| |
| #define CONST_OK_FOR_LETTER_P(VALUE, C) 0 |
| |
| /* we don't define any special double sizes so all should fail */ |
| |
| #define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) 0 |
| |
| |
| /* |
| * Describing Stack Layout |
| */ |
| |
| /* tahoe stack grows from high to low memory */ |
| |
| #define STACK_GROWS_DOWNWARD |
| |
| /* Define this if longjmp restores from saved registers |
| rather than from what setjmp saved. */ |
| #define LONGJMP_RESTORE_FROM_STACK |
| |
| /* tahoe call frames grow from high to low memory on the stack */ |
| |
| #define FRAME_GROWS_DOWNWARD |
| |
| /* the tahoe fp points to the *top* of the frame instead of the */ |
| /* bottom, so we have to make this offset a constant large enough */ |
| /* to jump over the biggest frame possible. */ |
| |
| #define STARTING_FRAME_OFFSET -52 |
| |
| /* tahoe always pushes 4 bytes unless it's a double in which case */ |
| /* it pushes a full 8 bytes. */ |
| |
| #define PUSH_ROUNDING(BYTES) (BYTES <= 4 ? 4 : 8) |
| |
| /* the first parameter in a function is at the fp + 4 */ |
| |
| #define FIRST_PARM_OFFSET(FNDECL) 4 |
| |
| /* the tahoe return function takes care of everything on the stack */ |
| |
| #define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) (SIZE) |
| |
| /* function values for all types are returned in register 0 */ |
| |
| #define FUNCTION_VALUE(VALTYPE, FUNC) \ |
| gen_rtx (REG, TYPE_MODE (VALTYPE), 0) |
| |
| /* library routines also return things in reg 0 */ |
| |
| #define LIBCALL_VALUE(MODE) gen_rtx (REG, MODE, 0) |
| |
| /* Tahoe doesn't return structures in a reentrant way */ |
| |
| #define PCC_STATIC_STRUCT_RETURN |
| |
| /* we only return values from a function in reg 0 */ |
| |
| #define FUNCTION_VALUE_REGNO_P(N) ((N) == 0) |
| |
| /* we never pass args through a register */ |
| |
| #define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) 0 |
| |
| /* int is fine to hold the argument summary in FUNCTION_ARG */ |
| |
| #define CUMULATIVE_ARGS int |
| |
| /* we just set CUM to 0 before the FUNCTION_ARG call. No matter what */ |
| /* we make it, FUNCTION_ARG will return 0 anyway */ |
| |
| #define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME,INDIRECT) \ |
| ((CUM) = 0) |
| |
| /* all modes push their size rounded to the nearest word boundary */ |
| /* except block which is the size of the block rounded up */ |
| |
| #define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \ |
| ((CUM) += ((MODE) != BLKmode \ |
| ? (GET_MODE_SIZE (MODE) + 3) & ~3 \ |
| : (int_size_in_bytes (TYPE) + 3) & ~3)) |
| |
| /* this is always false since we never pass params in regs */ |
| |
| #define FUNCTION_ARG_REGNO_P(N) 0 |
| |
| /* this code calculates the register entry mask and sets up */ |
| /* the stack pointer for the function. The stack is set down */ |
| /* far enough from the fp to jump over any push regs and local */ |
| /* vars. This is a problem since the tahoe has the fp pointing */ |
| /* to the top of the frame and the compiler must know the off- */ |
| /* set off the fp to the local vars. */ |
| |
| #define FUNCTION_PROLOGUE(FILE, SIZE) \ |
| { register int regno; \ |
| register int mask = 0; \ |
| extern char call_used_regs[]; \ |
| for (regno = 0; regno < FIRST_PSEUDO_REGISTER-1; regno++) \ |
| if (regs_ever_live[regno] && !call_used_regs[regno]) \ |
| mask |= 1 << regno; \ |
| fprintf (FILE, "\t.word 0x%x\n", mask); \ |
| if (SIZE != 0) fprintf (FILE, "\tsubl3 $%d,fp,sp\n", (SIZE) - STARTING_FRAME_OFFSET); } |
| |
| /* Zero out global variable in case it was used in this function. */ |
| #define FUNCTION_EPILOGUE(FILE, SIZE) \ |
| { extern rtx tahoe_reg_conversion_loc; \ |
| tahoe_reg_conversion_loc = 0; \ |
| } |
| |
| #ifdef HCX_UX |
| |
| /* to call the profiler, the address of the counter var is placed */ |
| /* on the stack and then passed into mcount this way */ |
| |
| #define FUNCTION_PROFILER(FILE, LABELNO) \ |
| fprintf (FILE, "\tpushal LP%d\n\tcallf $8,mcount\n", (LABELNO)); |
| |
| #else |
| |
| /* to call the profiler, push the variable value onto the stack */ |
| /* and call mcount like a regular function. */ |
| |
| #define FUNCTION_PROFILER(FILE, LABELNO) \ |
| fprintf (FILE, "\tpushl $LP%d\n\tcallf $8,mcount\n", (LABELNO)); |
| |
| #endif |
| |
| /* all stack handling at the end of a function is handled by the */ |
| /* return command. */ |
| |
| #define EXIT_IGNORE_STACK 1 |
| |
| /* |
| * Library Subroutine Names |
| */ |
| |
| /* udiv is a valid C library routine in libc.a, so we call that */ |
| |
| #define UDIVSI3_LIBCALL "*udiv" |
| |
| /* urem is a valid C library routine in libc.a, so we call that */ |
| /* but not so on hcx/ux */ |
| |
| #ifdef HCX_UX |
| #undef UMODSI3_LIBCALL |
| #else |
| #define UMODSI3_LIBCALL "*urem" |
| #endif |
| |
| |
| /* |
| * Addressing Modes |
| */ |
| |
| /* constant addresses can be treated exactly the same as normal constants */ |
| |
| #define CONSTANT_ADDRESS_P(X) \ |
| (GET_CODE (X) == LABEL_REF || GET_CODE (X) == SYMBOL_REF \ |
| || GET_CODE (X) == CONST_INT || GET_CODE (X) == CONST \ |
| || GET_CODE (X) == HIGH) |
| |
| /* we can have as many as two regs in any given address */ |
| |
| #define MAX_REGS_PER_ADDRESS 2 |
| |
| /* The following is all the code for GO_IF_LEGITIMATE_ADDRESS */ |
| /* most of this taken directly from the vax tm file since the */ |
| /* tahoe and vax addressing modes are nearly identical. */ |
| |
| /* Is x an indirectable address? */ |
| |
| #define INDIRECTABLE_ADDRESS_P(X) \ |
| (CONSTANT_ADDRESS_P (X) \ |
| || (GET_CODE (X) == REG && REG_OK_FOR_BASE_P (X)) \ |
| || (GET_CODE (X) == PLUS \ |
| && GET_CODE (XEXP (X, 0)) == REG \ |
| && REG_OK_FOR_BASE_P (XEXP (X, 0)) \ |
| && CONSTANT_ADDRESS_P (XEXP (X, 1)))) |
| |
| /* If x is a non-indexed-address, go to ADDR. */ |
| |
| #define GO_IF_NONINDEXED_ADDRESS(X, ADDR) \ |
| { register rtx xfoob = (X); \ |
| if (GET_CODE (xfoob) == REG) goto ADDR; \ |
| if (INDIRECTABLE_ADDRESS_P (xfoob)) goto ADDR; \ |
| xfoob = XEXP (X, 0); \ |
| if (GET_CODE (X) == MEM && INDIRECTABLE_ADDRESS_P (xfoob)) \ |
| goto ADDR; \ |
| if ((GET_CODE (X) == PRE_DEC || GET_CODE (X) == POST_INC) \ |
| && GET_CODE (xfoob) == REG && REGNO (xfoob) == 14) \ |
| goto ADDR; } |
| |
| /* Is PROD an index term in mode MODE. */ |
| |
| #define INDEX_TERM_P(PROD, MODE) \ |
| (GET_MODE_SIZE (MODE) == 1 \ |
| ? (GET_CODE (PROD) == REG && REG_OK_FOR_BASE_P (PROD)) \ |
| : (GET_CODE (PROD) == MULT \ |
| && \ |
| (xfoo0 = XEXP (PROD, 0), xfoo1 = XEXP (PROD, 1), \ |
| ((GET_CODE (xfoo0) == CONST_INT \ |
| && INTVAL (xfoo0) == GET_MODE_SIZE (MODE) \ |
| && GET_CODE (xfoo1) == REG \ |
| && REG_OK_FOR_INDEX_P (xfoo1)) \ |
| || \ |
| (GET_CODE (xfoo1) == CONST_INT \ |
| && INTVAL (xfoo1) == GET_MODE_SIZE (MODE) \ |
| && GET_CODE (xfoo0) == REG \ |
| && REG_OK_FOR_INDEX_P (xfoo0)))))) |
| |
| /* Is the addition to the index a reg? */ |
| |
| #define GO_IF_REG_PLUS_INDEX(X, MODE, ADDR) \ |
| { register rtx xfooa; \ |
| if (GET_CODE (X) == PLUS) \ |
| { if (GET_CODE (XEXP (X, 0)) == REG \ |
| && REG_OK_FOR_BASE_P (XEXP (X, 0)) \ |
| && (xfooa = XEXP (X, 1), \ |
| INDEX_TERM_P (xfooa, MODE))) \ |
| goto ADDR; \ |
| if (GET_CODE (XEXP (X, 1)) == REG \ |
| && REG_OK_FOR_BASE_P (XEXP (X, 1)) \ |
| && (xfooa = XEXP (X, 0), \ |
| INDEX_TERM_P (xfooa, MODE))) \ |
| goto ADDR; } } |
| |
| /* Is the rtx X a valid memory address for operand of mode MODE? */ |
| /* If it is, go to ADDR */ |
| |
| #define GO_IF_LEGITIMATE_ADDRESS(MODE, X, ADDR) \ |
| { register rtx xfoo, xfoo0, xfoo1; \ |
| GO_IF_NONINDEXED_ADDRESS (X, ADDR); \ |
| if (GET_CODE (X) == PLUS) \ |
| { xfoo = XEXP (X, 0); \ |
| if (INDEX_TERM_P (xfoo, MODE)) \ |
| { GO_IF_NONINDEXED_ADDRESS (XEXP (X, 1), ADDR); } \ |
| xfoo = XEXP (X, 1); \ |
| if (INDEX_TERM_P (xfoo, MODE)) \ |
| { GO_IF_NONINDEXED_ADDRESS (XEXP (X, 0), ADDR); } \ |
| if (CONSTANT_ADDRESS_P (XEXP (X, 0))) \ |
| { if (GET_CODE (XEXP (X, 1)) == REG \ |
| && REG_OK_FOR_BASE_P (XEXP (X, 1))) \ |
| goto ADDR; \ |
| GO_IF_REG_PLUS_INDEX (XEXP (X, 1), MODE, ADDR); } \ |
| if (CONSTANT_ADDRESS_P (XEXP (X, 1))) \ |
| { if (GET_CODE (XEXP (X, 0)) == REG \ |
| && REG_OK_FOR_BASE_P (XEXP (X, 0))) \ |
| goto ADDR; \ |
| GO_IF_REG_PLUS_INDEX (XEXP (X, 0), MODE, ADDR); } } } |
| |
| /* Register 16 can never be used for index or base */ |
| |
| #ifndef REG_OK_STRICT |
| #define REG_OK_FOR_INDEX_P(X) (REGNO(X) != 16) |
| #define REG_OK_FOR_BASE_P(X) (REGNO(X) != 16) |
| #else |
| #define REG_OK_FOR_INDEX_P(X) REGNO_OK_FOR_INDEX_P (REGNO (X)) |
| #define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X)) |
| #endif |
| |
| /* Addressing is too simple to allow optimizing here */ |
| |
| #define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) {} |
| |
| /* Post_inc and pre_dec always adds 4 */ |
| |
| #define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \ |
| { if (GET_CODE(ADDR) == POST_INC || GET_CODE(ADDR) == PRE_DEC) \ |
| goto LABEL; \ |
| if (GET_CODE (ADDR) == PLUS) \ |
| { if (CONSTANT_ADDRESS_P (XEXP (ADDR, 0)) \ |
| && GET_CODE (XEXP (ADDR, 1)) == REG); \ |
| else if (CONSTANT_ADDRESS_P (XEXP (ADDR, 1)) \ |
| && GET_CODE (XEXP (ADDR, 0)) == REG); \ |
| else goto LABEL; }} |
| |
| /* Double's are not legitimate as immediate operands */ |
| |
| #define LEGITIMATE_CONSTANT_P(X) \ |
| (GET_CODE (X) != CONST_DOUBLE) |
| |
| |
| /* |
| * Miscellaneous Parameters |
| */ |
| |
| /* the elements in the case jump table are all words */ |
| |
| #define CASE_VECTOR_MODE HImode |
| |
| /* each of the table elements in a case are relative to the jump address */ |
| |
| #define CASE_VECTOR_PC_RELATIVE |
| |
| /* tahoe case instructions just fall through to the next instruction */ |
| /* if not satisfied. It doesn't support a default action */ |
| |
| #define CASE_DROPS_THROUGH |
| |
| /* the standard answer is given here and work ok */ |
| |
| #define IMPLICIT_FIX_EXPR FIX_ROUND_EXPR |
| |
| /* in a general div case, it's easiest to use TRUNC_DIV_EXPR */ |
| |
| #define EASY_DIV_EXPR TRUNC_DIV_EXPR |
| |
| /* the standard seems to be leaving char's as signed so we left it */ |
| /* this way even though we think they should be unsigned! */ |
| |
| #define DEFAULT_SIGNED_CHAR 1 |
| |
| /* the most we can move without cutting down speed is 4 bytes */ |
| |
| #define MOVE_MAX 4 |
| |
| /* our int is 32 bits */ |
| |
| #define INT_TYPE_SIZE 32 |
| |
| /* byte access isn't really slower than anything else */ |
| |
| #define SLOW_BYTE_ACCESS 0 |
| |
| /* zero extension is more than one instruction so try to avoid it */ |
| |
| #define SLOW_ZERO_EXTEND |
| |
| /* any bits higher than the low 4 are ignored in the shift count */ |
| /* so don't bother zero extending or sign extending them */ |
| |
| #define SHIFT_COUNT_TRUNCATED 1 |
| |
| /* we don't need to officially convert from one fixed type to another */ |
| /* in order to use it as that type. We can just assume it's the same */ |
| |
| #define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1 |
| |
| /* pass chars as ints */ |
| |
| #define PROMOTE_PROTOTYPES |
| |
| /* pointers can be represented by an si mode expression */ |
| |
| #define Pmode SImode |
| |
| /* function addresses are made by specifying a byte address */ |
| |
| #define FUNCTION_MODE QImode |
| |
| /* Define this if addresses of constant functions |
| shouldn't be put through pseudo regs where they can be cse'd. |
| On the tahoe a call with a constant address is much faster than one with a |
| register. */ |
| |
| #define NO_FUNCTION_CSE |
| |
| /* specify the costs of various sorts of constants, |
| and also indicate that multiplication is cheap on this machine. */ |
| |
| #define CONST_COSTS(RTX,CODE,OUTER_CODE) \ |
| case CONST_INT: \ |
| /* Constant zero is super cheap due to clr instruction. */ \ |
| if (RTX == const0_rtx) return 0; \ |
| if ((unsigned) INTVAL (RTX) < 077) return 1; \ |
| if (INTVAL (RTX) <= 127 && INTVAL (RTX) >= -128) return 2; \ |
| case CONST: \ |
| case LABEL_REF: \ |
| case SYMBOL_REF: \ |
| return 3; \ |
| case CONST_DOUBLE: \ |
| return 5; \ |
| case MULT: \ |
| total = 2; |
| |
| |
| /* |
| * Condition Code Information |
| */ |
| |
| /* Nonzero if the results of the previous comparison are |
| in the floating point condition code register. */ |
| |
| #define CC_UNCHANGED 04000 |
| |
| |
| #define NOTICE_UPDATE_CC(EXP, INSN) \ |
| { if (cc_status.flags & CC_UNCHANGED) \ |
| /* Happens for cvtld and a few other insns. */ \ |
| cc_status.flags &= ~CC_UNCHANGED; \ |
| else if (GET_CODE (EXP) == SET) \ |
| { if (GET_CODE (SET_SRC (EXP)) == CALL) \ |
| CC_STATUS_INIT; \ |
| else if (GET_CODE (SET_DEST (EXP)) != PC) \ |
| { cc_status.flags = 0; \ |
| cc_status.value1 = SET_DEST (EXP); \ |
| cc_status.value2 = SET_SRC (EXP); } } \ |
| else if (GET_CODE (EXP) == PARALLEL \ |
| && GET_CODE (XVECEXP (EXP, 0, 0)) == SET \ |
| && GET_CODE (SET_DEST (XVECEXP (EXP, 0, 0))) != PC) \ |
| { cc_status.flags = 0; \ |
| cc_status.value1 = SET_DEST (XVECEXP (EXP, 0, 0)); \ |
| cc_status.value2 = SET_SRC (XVECEXP (EXP, 0, 0)); } \ |
| /* PARALLELs whose first element sets the PC are aob, sob insns. \ |
| They do change the cc's. So drop through and forget the cc's. */ \ |
| else CC_STATUS_INIT; \ |
| if (cc_status.value1 && GET_CODE (cc_status.value1) == REG \ |
| && cc_status.value2 \ |
| && reg_overlap_mentioned_p (cc_status.value1, cc_status.value2)) \ |
| cc_status.value2 = 0; \ |
| if (cc_status.value1 && GET_CODE (cc_status.value1) == MEM \ |
| && cc_status.value2 \ |
| && GET_CODE (cc_status.value2) == MEM) \ |
| cc_status.value2 = 0; } |
| /* Actual condition, one line up, should be that value2's address |
| depends on value1, but that is too much of a pain. */ |
| |
| |
| /* |
| * Output of Assembler Code |
| */ |
| |
| /* print which tahoe version compiled this code and print a directive */ |
| /* to the gnu assembler to say that the following is normal assembly */ |
| |
| #ifdef HCX_UX |
| #define ASM_FILE_START(FILE) \ |
| { fprintf (FILE, "#gcc hcx 1.0\n\n"); \ |
| output_file_directive ((FILE), main_input_filename);} while (0) |
| #else |
| #define ASM_FILE_START(FILE) fprintf (FILE, "#gcc tahoe 1.0\n#NO_APP\n"); |
| #endif |
| |
| /* the instruction that turns on the APP for the gnu assembler */ |
| |
| #define ASM_APP_ON "#APP\n" |
| |
| /* the instruction that turns off the APP for the gnu assembler */ |
| |
| #define ASM_APP_OFF "#NO_APP\n" |
| |
| /* what to output before read-only data. */ |
| |
| #define TEXT_SECTION_ASM_OP ".text" |
| |
| /* what to output before writable data. */ |
| |
| #define DATA_SECTION_ASM_OP ".data" |
| |
| /* this is what we call each of the regs. notice that the FPP reg is */ |
| /* called "ac". This should never get used due to the way we've set */ |
| /* up FPP instructions in the md file. But we call it "ac" here to */ |
| /* fill the list. */ |
| |
| #define REGISTER_NAMES \ |
| {"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", \ |
| "r9", "r10", "r11", "r12", "fp", "sp", "pc", "ac"} |
| |
| #ifdef HCX_UX |
| /* allow generation of sdb info in the assembly */ |
| #define SDB_DEBUGGING_INFO |
| #else |
| /* allow generation of dbx info in the assembly */ |
| |
| #define DBX_DEBUGGING_INFO |
| |
| /* our dbx doesn't support this */ |
| |
| #define DBX_NO_XREFS |
| |
| /* we don't want symbols broken up */ |
| |
| #define DBX_CONTIN_LENGTH 0 |
| |
| /* this'll really never be used, but we'll leave it at this */ |
| |
| #define DBX_CONTIN_CHAR '?' |
| |
| #endif /* HCX_UX */ |
| |
| /* registers are called the same thing in dbx anything else */ |
| /* This is necessary even if we generate SDB output */ |
| |
| #define DBX_REGISTER_NUMBER(REGNO) (REGNO) |
| |
| /* labels are the label followed by a colon and a newline */ |
| /* must be a statement, so surround it in a null loop */ |
| |
| #define ASM_OUTPUT_LABEL(FILE,NAME) \ |
| do { assemble_name (FILE, NAME); fputs (":\n", FILE); } while (0) |
| |
| /* use the .globl directive to make labels global for the linker */ |
| |
| #define ASM_GLOBALIZE_LABEL(FILE,NAME) \ |
| do { fputs (".globl ", FILE); assemble_name (FILE, NAME); fputs ("\n", FILE);} while (0) |
| |
| /* The prefix to add to user-visible assembler symbols. */ |
| |
| #define USER_LABEL_PREFIX "_" |
| |
| /* use the standard format for printing internal labels */ |
| |
| #define ASM_OUTPUT_INTERNAL_LABEL(FILE,PREFIX,NUM) \ |
| fprintf (FILE, "%s%d:\n", PREFIX, NUM) |
| |
| /* a * is used for label indirection in unix assembly */ |
| |
| #define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \ |
| sprintf (LABEL, "*%s%d", PREFIX, NUM) |
| |
| /* outputting a double is easy cause we only have one kind */ |
| |
| #ifdef HCX_UX |
| #define ASM_OUTPUT_DOUBLE(FILE,VALUE) \ |
| fprintf (FILE, "\t.double 0d%.20e\n", (VALUE)) |
| #else |
| #define ASM_OUTPUT_DOUBLE(FILE,VALUE) \ |
| { \ |
| union { int i[2]; double d;} temp; \ |
| temp.d = (VALUE); \ |
| if (TARGET_HEX_FLOAT) \ |
| fprintf ((FILE), "\t.long 0x%x,0x%x # %.20e\n", \ |
| temp.i[0], temp.i[1], temp.d); \ |
| else \ |
| fprintf (FILE, "\t.dfloat 0d%.20e\n", temp.d); \ |
| } |
| #endif |
| |
| /* This is how to output an assembler line defining a `float' constant. */ |
| |
| #ifdef HCX_UX |
| #define ASM_OUTPUT_FLOAT(FILE,VALUE) \ |
| fprintf (FILE, "\t.float 0f%.20e\n", (VALUE)) |
| #else |
| #define ASM_OUTPUT_FLOAT(FILE,VALUE) \ |
| { \ |
| union { int i; float f;} temp; \ |
| temp.f = (float) (VALUE); \ |
| if (TARGET_HEX_FLOAT) \ |
| fprintf ((FILE), "\t.long 0x%x # %.20e\n", \ |
| temp.i, temp.f); \ |
| else \ |
| fprintf (FILE, "\t.float 0f%.20e\n", temp.f); \ |
| } |
| #endif |
| |
| /* This is how to output an assembler line defining an `int' constant. */ |
| |
| #define ASM_OUTPUT_INT(FILE,VALUE) \ |
| ( fprintf (FILE, "\t.long "), \ |
| output_addr_const (FILE, (VALUE)), \ |
| fprintf (FILE, "\n")) |
| |
| /* Likewise for `char' and `short' constants. */ |
| |
| #define ASM_OUTPUT_SHORT(FILE,VALUE) \ |
| ( fprintf (FILE, "\t.word "), \ |
| output_addr_const (FILE, (VALUE)), \ |
| fprintf (FILE, "\n")) |
| |
| #define ASM_OUTPUT_CHAR(FILE,VALUE) \ |
| ( fprintf (FILE, "\t.byte "), \ |
| output_addr_const (FILE, (VALUE)), \ |
| fprintf (FILE, "\n")) |
| |
| #ifdef HCX_UX |
| /* This is how to output an assembler line for an ASCII string. */ |
| |
| #define ASM_OUTPUT_ASCII(FILE, p, size) \ |
| do { register int i; \ |
| fprintf ((FILE), "\t.ascii \""); \ |
| for (i = 0; i < (size); i++) \ |
| { \ |
| register int c = (p)[i]; \ |
| if (c == '\'' || c == '\\') \ |
| putc ('\\', (FILE)); \ |
| if (c >= ' ' && c < 0177 && c != '\"') \ |
| putc (c, (FILE)); \ |
| else \ |
| { \ |
| fprintf ((FILE), "\\%03o", c); \ |
| } \ |
| } \ |
| fprintf ((FILE), "\"\n"); } while (0) |
| #endif |
| |
| /* This is how to output an assembler line for a numeric constant byte. */ |
| |
| #define ASM_OUTPUT_BYTE(FILE,VALUE) \ |
| fprintf (FILE, "\t.byte 0x%x\n", (VALUE)) |
| |
| /* this is the insn to push a register onto the stack */ |
| |
| #define ASM_OUTPUT_REG_PUSH(FILE,REGNO) \ |
| fprintf (FILE, "\tpushl %s\n", reg_names[REGNO]) |
| |
| /* this is the insn to pop a register from the stack */ |
| |
| #define ASM_OUTPUT_REG_POP(FILE,REGNO) \ |
| fprintf (FILE, "\tmovl (sp)+,%s\n", reg_names[REGNO]) |
| |
| /* this is required even thought tahoe doesn't support it */ |
| /* cause the C code expects it to be defined */ |
| |
| #define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \ |
| fprintf (FILE, "\t.long L%d\n", VALUE) |
| |
| /* This is how to output an element of a case-vector that is relative. */ |
| |
| #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) \ |
| fprintf (FILE, "\t.word L%d-L%d\n", VALUE, REL) |
| |
| /* This is how to output an assembler line |
| that says to advance the location counter |
| to a multiple of 2**LOG bytes. */ |
| |
| #ifdef HCX_UX |
| #define CASE_ALIGNMENT 2 |
| #define ASM_OUTPUT_ALIGN(FILE,LOG) \ |
| if ((LOG)!=0) fprintf ((FILE), "\t.align %d\n", 1<<(LOG)) |
| #else |
| #define CASE_ALIGNMENT 1 |
| #define ASM_OUTPUT_ALIGN(FILE,LOG) \ |
| LOG ? fprintf (FILE, "\t.align %d\n", (LOG)) : 0 |
| #endif |
| |
| /* This is how to skip over some space */ |
| |
| #define ASM_OUTPUT_SKIP(FILE,SIZE) \ |
| fprintf (FILE, "\t.space %u\n", (SIZE)) |
| |
| /* This defines common variables across files */ |
| |
| #ifdef HCX_UX |
| #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \ |
| ( fputs (".comm ", (FILE)), \ |
| assemble_name ((FILE), (NAME)), \ |
| fprintf ((FILE), ",%u\n", (SIZE))) |
| #else |
| #define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \ |
| ( fputs (".comm ", (FILE)), \ |
| assemble_name ((FILE), (NAME)), \ |
| fprintf ((FILE), ",%u\n", (ROUNDED))) |
| #endif |
| |
| /* This says how to output an assembler line |
| to define a local common symbol. */ |
| |
| #ifdef HCX_UX |
| #define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED) \ |
| ( fputs ("\t.bss ", (FILE)), \ |
| assemble_name ((FILE), (NAME)), \ |
| fprintf ((FILE), ",%u,4\n", (SIZE),(ROUNDED))) |
| #else |
| #define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED) \ |
| ( fputs (".lcomm ", (FILE)), \ |
| assemble_name ((FILE), (NAME)), \ |
| fprintf ((FILE), ",%u\n", (ROUNDED))) |
| #endif |
| |
| /* code to generate a label */ |
| |
| #define ASM_FORMAT_PRIVATE_NAME(OUTPUT, NAME, LABELNO) \ |
| ( (OUTPUT) = (char *) alloca (strlen ((NAME)) + 10), \ |
| sprintf ((OUTPUT), "%s.%d", (NAME), (LABELNO))) |
| |
| /* Define the parentheses used to group arithmetic operations |
| in assembler code. */ |
| |
| #define ASM_OPEN_PAREN "(" |
| #define ASM_CLOSE_PAREN ")" |
| |
| /* Define results of standard character escape sequences. */ |
| |
| #define TARGET_BELL 007 |
| #define TARGET_BS 010 |
| #define TARGET_TAB 011 |
| #define TARGET_NEWLINE 012 |
| #define TARGET_VT 013 |
| #define TARGET_FF 014 |
| #define TARGET_CR 015 |
| |
| /* Print an instruction operand X on file FILE. |
| CODE is the code from the %-spec that requested printing this operand; |
| if `%z3' was used to print operand 3, then CODE is 'z'. |
| On the Vax, the only code used is `#', indicating that either |
| `d' or `g' should be printed, depending on whether we're using dfloat |
| or gfloat. */ |
| /* Print an operand. Some difference from the vax code, |
| since the tahoe can't support immediate floats and doubles. |
| |
| %@ means print the proper alignment operand for aligning after a casesi. |
| This depends on the assembler syntax. |
| This is 1 for our assembler, since .align is logarithmic. |
| |
| %s means the number given is supposed to be a shift value, but on |
| the tahoe it should be converted to a number that can be used as a |
| multiplicative constant (cause multiplication is a whole lot faster |
| than shifting). So make the number 2^n instead. */ |
| |
| #define PRINT_OPERAND_PUNCT_VALID_P(CODE) \ |
| ((CODE) == '@') |
| |
| #define PRINT_OPERAND(FILE, X, CODE) \ |
| { if (CODE == '@') \ |
| putc ('0' + CASE_ALIGNMENT, FILE); \ |
| else if (CODE == 's') \ |
| fprintf (FILE, "$%d", 1 << INTVAL(X)); \ |
| else if (GET_CODE (X) == REG) \ |
| fprintf (FILE, "%s", reg_names[REGNO (X)]); \ |
| else if (GET_CODE (X) == MEM) \ |
| output_address (XEXP (X, 0)); \ |
| else { putc ('$', FILE); output_addr_const (FILE, X); }} |
| |
| /* When the operand is an address, call print_operand_address to */ |
| /* do the work from output-tahoe.c. */ |
| |
| #define PRINT_OPERAND_ADDRESS(FILE, ADDR) \ |
| print_operand_address (FILE, ADDR) |
| |
| /* This is for G++ */ |
| |
| #define CRT0_DUMMIES |
| #define DOT_GLOBAL_START |
| #ifdef HCX_UX |
| #define NO_GNU_LD /* because of COFF format */ |
| #define LINK_SPEC "-L/usr/staff/lib" |
| #endif |
