| ------------------------------------------------------------------------------ |
| -- -- |
| -- GNAT COMPILER COMPONENTS -- |
| -- -- |
| -- A L I -- |
| -- -- |
| -- S p e c -- |
| -- -- |
| -- Copyright (C) 1992-2022, Free Software Foundation, Inc. -- |
| -- -- |
| -- GNAT is free software; you can redistribute it and/or modify it under -- |
| -- terms of the GNU General Public License as published by the Free Soft- -- |
| -- ware Foundation; either version 3, or (at your option) any later ver- -- |
| -- sion. GNAT is distributed in the hope that it will be useful, but WITH- -- |
| -- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY -- |
| -- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License -- |
| -- for more details. You should have received a copy of the GNU General -- |
| -- Public License distributed with GNAT; see file COPYING3. If not, go to -- |
| -- http://www.gnu.org/licenses for a complete copy of the license. -- |
| -- -- |
| -- GNAT was originally developed by the GNAT team at New York University. -- |
| -- Extensive contributions were provided by Ada Core Technologies Inc. -- |
| -- -- |
| ------------------------------------------------------------------------------ |
| |
| -- This package defines the internal data structures used for representation |
| -- of Ada Library Information (ALI) acquired from the ALI files generated by |
| -- the front end. |
| |
| with Casing; use Casing; |
| with Gnatvsn; use Gnatvsn; |
| with Namet; use Namet; |
| with Rident; use Rident; |
| with Table; |
| with Types; use Types; |
| |
| with GNAT.Dynamic_Tables; |
| with GNAT.HTable; use GNAT.HTable; |
| |
| package ALI is |
| |
| -------------- |
| -- Id Types -- |
| -------------- |
| |
| type ALI_Id is range 0 .. 99_999_999; |
| -- Id values used for ALIs table entries |
| |
| type CUDA_Kernel_Id is range 0 .. 99_999_999; |
| -- Id values used for CUDA_Kernel table entries |
| |
| type Unit_Id is range 0 .. 99_999_999; |
| -- Id values used for Unit table entries |
| |
| type With_Id is range 0 .. 99_999_999; |
| -- Id values used for Withs table entries |
| |
| type Arg_Id is range 0 .. 99_999_999; |
| -- Id values used for argument table entries |
| |
| type Sdep_Id is range 0 .. 99_999_999; |
| -- Id values used for Sdep table entries |
| |
| type Source_Id is range 0 .. 99_999_999; |
| -- Id values used for Source table entries |
| |
| type Interrupt_State_Id is range 0 .. 99_999_999; |
| -- Id values used for Interrupt_State table entries |
| |
| type Priority_Specific_Dispatching_Id is range 0 .. 99_999_999; |
| -- Id values used for Priority_Specific_Dispatching table entries |
| |
| type Invocation_Construct_Id is range 0 .. 99_999_999; |
| -- Id values used for Invocation_Constructs table entries |
| |
| type Invocation_Relation_Id is range 0 .. 99_999_999; |
| -- Id values used for Invocation_Relations table entries |
| |
| type Invocation_Signature_Id is range 0 .. 99_999_999; |
| -- Id values used for Invocation_Signatures table entries |
| |
| function Present (IC_Id : Invocation_Construct_Id) return Boolean; |
| pragma Inline (Present); |
| -- Determine whether invocation construct IC_Id exists |
| |
| function Present (IR_Id : Invocation_Relation_Id) return Boolean; |
| pragma Inline (Present); |
| -- Determine whether invocation relation IR_Id exists |
| |
| function Present (IS_Id : Invocation_Signature_Id) return Boolean; |
| pragma Inline (Present); |
| -- Determine whether invocation signature IS_Id exists |
| |
| function Present (Dep : Sdep_Id) return Boolean; |
| pragma Inline (Present); |
| -- Determine whether dependant Dep exists |
| |
| function Present (U_Id : Unit_Id) return Boolean; |
| pragma Inline (Present); |
| -- Determine whether unit U_Id exists |
| |
| function Present (W_Id : With_Id) return Boolean; |
| pragma Inline (Present); |
| -- Determine whether with W_Id exists |
| |
| -------------------- |
| -- ALI File Table -- |
| -------------------- |
| |
| -- Each ALI file read generates an entry in the ALIs table |
| |
| No_ALI_Id : constant ALI_Id := ALI_Id'First; |
| -- Special value indicating no ALI entry |
| |
| First_ALI_Entry : constant ALI_Id := No_ALI_Id + 1; |
| -- Id of first actual entry in table |
| |
| -- The following type enumerates all possible invocation-graph encoding |
| -- kinds. |
| |
| type Invocation_Graph_Encoding_Kind is |
| (Endpoints_Encoding, |
| -- The invocation construct and relation lines contain information for |
| -- the start construct and end target found on an invocation-graph path. |
| |
| Full_Path_Encoding, |
| -- The invocation construct and relation lines contain information for |
| -- all constructs and targets found on a invocation-graph path. |
| |
| No_Encoding); |
| |
| type Main_Program_Type is (None, Proc, Func); |
| -- Indicator of whether unit can be used as main program |
| |
| type ALIs_Record is record |
| Afile : File_Name_Type; |
| -- Name of ALI file |
| |
| Ofile_Full_Name : File_Name_Type; |
| -- Full name of object file corresponding to the ALI file |
| |
| Sfile : File_Name_Type; |
| -- Name of source file that generates this ALI file (which is equal |
| -- to the name of the source file in the first unit table entry for |
| -- this ALI file, since the body if present is always first). |
| |
| Ver : String (1 .. Ver_Len_Max); |
| -- Value of library version (V line in ALI file). Not set if |
| -- V lines are ignored as a result of the Ignore_Lines parameter. |
| |
| Ver_Len : Natural; |
| -- Length of characters stored in Ver. Not set if V lines are ignored as |
| -- a result of the Ignore_Lines parameter. |
| |
| SAL_Interface : Boolean; |
| -- Set True when this is an interface to a standalone library |
| |
| First_Unit : Unit_Id; |
| -- Id of first Unit table entry for this file |
| |
| Last_Unit : Unit_Id; |
| -- Id of last Unit table entry for this file |
| |
| First_Sdep : Sdep_Id; |
| -- Id of first Sdep table entry for this file |
| |
| Last_Sdep : Sdep_Id; |
| -- Id of last Sdep table entry for this file |
| |
| Main_Program : Main_Program_Type; |
| -- Indicator of whether first unit can be used as main program. Not set |
| -- if 'M' appears in Ignore_Lines. |
| |
| Main_Priority : Int; |
| -- Indicates priority value if Main_Program field indicates that this |
| -- can be a main program. A value of -1 (No_Main_Priority) indicates |
| -- that no parameter was found, or no M line was present. Not set if |
| -- 'M' appears in Ignore_Lines. |
| |
| Main_CPU : Int; |
| -- Indicates processor if Main_Program field indicates that this can |
| -- be a main program. A value of -1 (No_Main_CPU) indicates that no C |
| -- parameter was found, or no M line was present. Not set if 'M' appears |
| -- in Ignore_Lines. |
| |
| Time_Slice_Value : Int; |
| -- Indicates value of time slice parameter from T=xxx on main program |
| -- line. A value of -1 indicates that no T=xxx parameter was found, or |
| -- no M line was present. Not set if 'M' appears in Ignore_Lines. |
| |
| WC_Encoding : Character; |
| -- Wide character encoding if main procedure. Otherwise not relevant. |
| -- Not set if 'M' appears in Ignore_Lines. |
| |
| Locking_Policy : Character; |
| -- Indicates locking policy for units in this file. Space means tasking |
| -- was not used, or that no Locking_Policy pragma was present or that |
| -- this is a language defined unit. Otherwise set to first character |
| -- (upper case) of policy name. Not set if 'P' appears in Ignore_Lines. |
| |
| Partition_Elaboration_Policy : Character; |
| -- Indicates partition elaboration policy for units in this file. Space |
| -- means that no Partition_Elaboration_Policy pragma was present or that |
| -- this is a language defined unit. Otherwise set to first character |
| -- (upper case) of policy name. Not set if 'P' appears in Ignore_Lines. |
| |
| Queuing_Policy : Character; |
| -- Indicates queuing policy for units in this file. Space means tasking |
| -- was not used, or that no Queuing_Policy pragma was present or that |
| -- this is a language defined unit. Otherwise set to first character |
| -- (upper case) of policy name. Not set if 'P' appears in Ignore_Lines. |
| |
| Task_Dispatching_Policy : Character; |
| -- Indicates task dispatching policy for units in this file. Space means |
| -- tasking was not used, or that no Task_Dispatching_Policy pragma was |
| -- present or that this is a language defined unit. Otherwise set to |
| -- first character (upper case) of policy name. Not set if 'P' appears |
| -- in Ignore_Lines. |
| |
| Compile_Errors : Boolean; |
| -- Set to True if compile errors for unit. Note that No_Object will |
| -- always be set as well in this case. Not set if 'P' appears in |
| -- Ignore_Lines. |
| |
| GNATprove_Mode : Boolean; |
| -- Set to True if ALI and object file produced in GNATprove_Mode as |
| -- signalled by GP appearing on the P line. Not set if 'P' appears in |
| -- Ignore_Lines. |
| |
| No_Component_Reordering : Boolean; |
| -- Set to True if file was compiled with a configuration pragma file |
| -- containing pragma No_Component_Reordering. Not set if 'P' appears |
| -- in Ignore_Lines. |
| |
| No_Object : Boolean; |
| -- Set to True if no object file generated. Not set if 'P' appears in |
| -- Ignore_Lines. |
| |
| Normalize_Scalars : Boolean; |
| -- Set to True if file was compiled with Normalize_Scalars. Not set if |
| -- 'P' appears in Ignore_Lines. |
| |
| SSO_Default : Character; |
| -- Set to 'H' or 'L' if file was compiled with a configuration pragma |
| -- file containing Default_Scalar_Storage_Order (High/Low_Order_First). |
| -- Set to ' ' if neither pragma was present. Not set if 'P' appears in |
| -- Ignore_Lines. |
| |
| Unit_Exception_Table : Boolean; |
| -- Set to True if unit exception table pointer generated. Not set if 'P' |
| -- appears in Ignore_Lines. |
| |
| Zero_Cost_Exceptions : Boolean; |
| -- Set to True if file was compiled with zero cost exceptions. Not set |
| -- if 'P' appears in Ignore_Lines. |
| |
| Restrictions : Restrictions_Info; |
| -- Restrictions information reconstructed from R lines |
| |
| First_CUDA_Kernel : CUDA_Kernel_Id; |
| Last_CUDA_Kernel : CUDA_Kernel_Id'Base; |
| -- These point to the first and last entries in the CUDA_Kernels table |
| -- for this unit. If there are no entries, First_CUDA_Kernel = |
| -- Last_CUDA_Kernel + 1. |
| |
| First_Interrupt_State : Interrupt_State_Id; |
| Last_Interrupt_State : Interrupt_State_Id'Base; |
| -- These point to the first and last entries in the interrupt state |
| -- table for this unit. If no entries, then Last_Interrupt_State = |
| -- First_Interrupt_State - 1 (that's why the 'Base reference is there, |
| -- it can be one less than the lower bound of the subtype). Not set if |
| -- 'I' appears in Ignore_Lines |
| |
| First_Specific_Dispatching : Priority_Specific_Dispatching_Id; |
| Last_Specific_Dispatching : Priority_Specific_Dispatching_Id'Base; |
| -- These point to the first and last entries in the priority specific |
| -- dispatching table for this unit. If there are no entries, then |
| -- Last_Specific_Dispatching = First_Specific_Dispatching - 1. That |
| -- is why the 'Base reference is there, it can be one less than the |
| -- lower bound of the subtype. Not set if 'S' appears in Ignore_Lines. |
| |
| Invocation_Graph_Encoding : Invocation_Graph_Encoding_Kind; |
| -- The encoding format used to capture information about the invocation |
| -- constructs and relations within the corresponding ALI file of this |
| -- unit. |
| end record; |
| |
| No_Main_Priority : constant Int := -1; |
| -- Code for no main priority set |
| |
| No_Main_CPU : constant Int := -1; |
| -- Code for no main cpu set |
| |
| package ALIs is new Table.Table ( |
| Table_Component_Type => ALIs_Record, |
| Table_Index_Type => ALI_Id, |
| Table_Low_Bound => First_ALI_Entry, |
| Table_Initial => 500, |
| Table_Increment => 200, |
| Table_Name => "ALIs"); |
| |
| --------------------------- |
| -- CUDA Kernels Table -- |
| --------------------------- |
| |
| -- An entry is made in this table for each K (CUDA Kernel) line |
| -- encountered in the input ALI file. The First/Last_CUDA_Kernel_Id |
| -- fields of the ALI file entry show the range of entries defined |
| -- within a particular ALI file. |
| |
| type CUDA_Kernel_Record is record |
| Kernel_Name : Name_Id; |
| end record; |
| |
| package CUDA_Kernels is new Table.Table ( |
| Table_Component_Type => CUDA_Kernel_Record, |
| Table_Index_Type => CUDA_Kernel_Id'Base, |
| Table_Low_Bound => CUDA_Kernel_Id'First, |
| Table_Initial => 100, |
| Table_Increment => 200, |
| Table_Name => "Cuda_Kernels"); |
| |
| ---------------- |
| -- Unit Table -- |
| ---------------- |
| |
| -- Each unit within an ALI file generates an entry in the unit table |
| |
| No_Unit_Id : constant Unit_Id := Unit_Id'First; |
| -- Special value indicating no unit table entry |
| |
| First_Unit_Entry : constant Unit_Id := No_Unit_Id + 1; |
| -- Id of first actual entry in table |
| |
| type Unit_Type is (Is_Spec, Is_Body, Is_Spec_Only, Is_Body_Only); |
| -- Indicates type of entry, if both body and spec appear in the ALI file, |
| -- then the first unit is marked Is_Body, and the second is marked Is_Spec. |
| -- If only a spec appears, then it is marked as Is_Spec_Only, and if only |
| -- a body appears, then it is marked Is_Body_Only). |
| |
| subtype Version_String is String (1 .. 8); |
| -- Version string, taken from unit record |
| |
| type Unit_Record is record |
| My_ALI : ALI_Id; |
| -- Corresponding ALI entry |
| |
| Uname : Unit_Name_Type; |
| -- Name of Unit |
| |
| Sfile : File_Name_Type; |
| -- Name of source file |
| |
| Preelab : Boolean; |
| -- Indicates presence of PR parameter for a preelaborated package |
| |
| No_Elab : Boolean; |
| -- Indicates presence of NE parameter for a unit that has does not |
| -- have an elaboration routine (since it has no elaboration code). |
| |
| Pure : Boolean; |
| -- Indicates presence of PU parameter for a package having pragma Pure |
| |
| Dynamic_Elab : Boolean; |
| -- Set to True if the unit was compiled with dynamic elaboration checks |
| -- (i.e. either -gnatE or pragma Elaboration_Checks (RM) was used to |
| -- compile the unit). |
| |
| Elaborate_Body : Boolean; |
| -- Indicates presence of EB parameter for a package which has a pragma |
| -- Elaborate_Body, and also for generic package instantiations. |
| |
| Set_Elab_Entity : Boolean; |
| -- Indicates presence of EE parameter for a unit which has an |
| -- elaboration entity which must be set true as part of the |
| -- elaboration of the unit. |
| |
| Has_RACW : Boolean; |
| -- Indicates presence of RA parameter for a package that declares at |
| -- least one Remote Access to Class_Wide (RACW) object. |
| |
| Remote_Types : Boolean; |
| -- Indicates presence of RT parameter for a package which has a |
| -- pragma Remote_Types. |
| |
| Serious_Errors : Boolean; |
| -- Indicates presence of SE parameter indicating that compilation of |
| -- the unit encountered as serious error. |
| |
| Shared_Passive : Boolean; |
| -- Indicates presence of SP parameter for a package which has a pragma |
| -- Shared_Passive. |
| |
| RCI : Boolean; |
| -- Indicates presence of RC parameter for a package which has a pragma |
| -- Remote_Call_Interface. |
| |
| Predefined : Boolean; |
| -- Indicates if unit is language predefined (or a child of such a unit) |
| |
| Internal : Boolean; |
| -- Indicates if unit is an internal unit (or a child of such a unit) |
| |
| First_With : With_Id; |
| -- Id of first withs table entry for this file |
| |
| Last_With : With_Id; |
| -- Id of last withs table entry for this file |
| |
| First_Arg : Arg_Id; |
| -- Id of first args table entry for this file |
| |
| Last_Arg : Arg_Id; |
| -- Id of last args table entry for this file |
| |
| First_Invocation_Construct : Invocation_Construct_Id; |
| -- Id of the first invocation construct for this unit |
| |
| Last_Invocation_Construct : Invocation_Construct_Id; |
| -- Id of the last invocation construct for this unit |
| |
| First_Invocation_Relation : Invocation_Relation_Id; |
| -- Id of the first invocation relation for this unit |
| |
| Last_Invocation_Relation : Invocation_Relation_Id; |
| -- Id of the last invocation relation for this unit |
| |
| Utype : Unit_Type; |
| -- Type of entry |
| |
| Is_Generic : Boolean; |
| -- True for generic unit (i.e. a generic declaration, or a generic |
| -- body). False for a non-generic unit. |
| |
| Unit_Kind : Character; |
| -- Indicates the nature of the unit. 'p' for Packages and 's' for |
| -- subprograms. |
| |
| Version : Version_String; |
| -- Version of unit |
| |
| Icasing : Casing_Type; |
| -- Indicates casing of identifiers in source file for this unit. This |
| -- is used for informational output, and also for constructing the main |
| -- unit if it is being built in Ada. |
| |
| Kcasing : Casing_Type; |
| -- Indicates casing of keywords in source file for this unit. This is |
| -- used for informational output, and also for constructing the main |
| -- unit if it is being built in Ada. |
| |
| Elab_Position : Nat; |
| -- Initialized to zero. Set non-zero when a unit is chosen and |
| -- placed in the elaboration order. The value represents the |
| -- ordinal position in the elaboration order. |
| |
| Init_Scalars : Boolean; |
| -- Set True if IS qualifier appears in ALI file, indicating that |
| -- an Initialize_Scalars pragma applies to the unit. |
| |
| SAL_Interface : Boolean; |
| -- Set True when this is an interface to a standalone library |
| |
| Directly_Scanned : Boolean; |
| -- True iff it is a unit from an ALI file specified to gnatbind |
| |
| Body_Needed_For_SAL : Boolean; |
| -- Indicates that the source for the body of the unit (subprogram, |
| -- package, or generic unit) must be included in a standalone library. |
| |
| Elaborate_Body_Desirable : Boolean; |
| -- Indicates that the front end elaboration circuitry decided that it |
| -- would be a good idea if this package had Elaborate_Body. The binder |
| -- will attempt, but does not promise, to place the elaboration call |
| -- for the body right after the call for the spec, or at least as close |
| -- together as possible. |
| |
| Optimize_Alignment : Character; |
| -- Optimize_Alignment setting. Set to L/S/T/O for OL/OS/OT/OO present. |
| |
| Has_Finalizer : Boolean; |
| -- Indicates whether a package body or a spec has a library-level |
| -- finalization routine. |
| |
| Primary_Stack_Count : Int; |
| -- Indicates the number of task objects declared in this unit that have |
| -- default sized primary stacks. |
| |
| Sec_Stack_Count : Int; |
| -- Indicates the number of task objects declared in this unit that have |
| -- default sized secondary stacks. |
| end record; |
| |
| package Units is new Table.Table ( |
| Table_Component_Type => Unit_Record, |
| Table_Index_Type => Unit_Id, |
| Table_Low_Bound => First_Unit_Entry, |
| Table_Initial => 100, |
| Table_Increment => 200, |
| Table_Name => "Unit"); |
| |
| package Unit_Id_Tables is new GNAT.Dynamic_Tables |
| (Table_Component_Type => Unit_Id, |
| Table_Index_Type => Nat, |
| Table_Low_Bound => 1, |
| Table_Initial => 500, |
| Table_Increment => 200); |
| |
| subtype Unit_Id_Table is Unit_Id_Tables.Instance; |
| subtype Unit_Id_Array is Unit_Id_Tables.Table_Type; |
| |
| --------------------------- |
| -- Interrupt State Table -- |
| --------------------------- |
| |
| -- An entry is made in this table for each I (interrupt state) line |
| -- encountered in the input ALI file. The First/Last_Interrupt_Id |
| -- fields of the ALI file entry show the range of entries defined |
| -- within a particular ALI file. |
| |
| type Interrupt_State_Record is record |
| Interrupt_Id : Nat; |
| -- Id from interrupt state entry |
| |
| Interrupt_State : Character; |
| -- State from interrupt state entry ('u'/'r'/'s') |
| |
| IS_Pragma_Line : Nat; |
| -- Line number of Interrupt_State pragma |
| end record; |
| |
| package Interrupt_States is new Table.Table ( |
| Table_Component_Type => Interrupt_State_Record, |
| Table_Index_Type => Interrupt_State_Id'Base, |
| Table_Low_Bound => Interrupt_State_Id'First, |
| Table_Initial => 100, |
| Table_Increment => 200, |
| Table_Name => "Interrupt_States"); |
| |
| ----------------------------------------- |
| -- Priority Specific Dispatching Table -- |
| ----------------------------------------- |
| |
| -- An entry is made in this table for each S (priority specific |
| -- dispatching) line encountered in the input ALI file. The |
| -- First/Last_Specific_Dispatching_Id fields of the ALI file |
| -- entry show the range of entries defined within a particular |
| -- ALI file. |
| |
| type Specific_Dispatching_Record is record |
| Dispatching_Policy : Character; |
| -- First character (upper case) of the corresponding policy name |
| |
| First_Priority : Nat; |
| -- Lower bound of the priority range to which the specified dispatching |
| -- policy applies. |
| |
| Last_Priority : Nat; |
| -- Upper bound of the priority range to which the specified dispatching |
| -- policy applies. |
| |
| PSD_Pragma_Line : Nat; |
| -- Line number of Priority_Specific_Dispatching pragma |
| end record; |
| |
| package Specific_Dispatching is new Table.Table ( |
| Table_Component_Type => Specific_Dispatching_Record, |
| Table_Index_Type => Priority_Specific_Dispatching_Id'Base, |
| Table_Low_Bound => Priority_Specific_Dispatching_Id'First, |
| Table_Initial => 100, |
| Table_Increment => 200, |
| Table_Name => "Priority_Specific_Dispatching"); |
| |
| -------------- |
| -- Switches -- |
| -------------- |
| |
| -- These switches record status information about ali files that |
| -- have been read, for quick reference without searching tables. |
| |
| -- Note: a switch will be left set at its default value if the line |
| -- which might otherwise set it is ignored (from Ignore_Lines). |
| |
| Dynamic_Elaboration_Checks_Specified : Boolean := False; |
| -- Set to False by Initialize_ALI. Set to True if Scan_ALI reads |
| -- a unit for which dynamic elaboration checking is enabled. |
| |
| GNATprove_Mode_Specified : Boolean := False; |
| -- Set to True if an ali file was produced in GNATprove mode. |
| |
| Initialize_Scalars_Used : Boolean := False; |
| -- Set True if an ali file contains the Initialize_Scalars flag |
| |
| Locking_Policy_Specified : Character := ' '; |
| -- Set to blank by Initialize_ALI. Set to the appropriate locking policy |
| -- character if an ali file contains a P line setting the locking policy. |
| |
| No_Normalize_Scalars_Specified : Boolean := False; |
| -- Set to False by Initialize_ALI. Set to True if an ali file indicates |
| -- that the file was compiled without normalize scalars. |
| |
| No_Component_Reordering_Specified : Boolean := False; |
| -- Set to False by Initialize_ALI. Set to True if an ali file contains |
| -- the No_Component_Reordering flag. |
| |
| No_Object_Specified : Boolean := False; |
| -- Set to False by Initialize_ALI. Set to True if an ali file contains |
| -- the No_Object flag. |
| |
| Normalize_Scalars_Specified : Boolean := False; |
| -- Set to False by Initialize_ALI. Set to True if an ali file indicates |
| -- that the file was compiled in Normalize_Scalars mode. |
| |
| Partition_Elaboration_Policy_Specified : Character := ' '; |
| -- Set to blank by Initialize_ALI. Set to the appropriate partition |
| -- elaboration policy character if an ali file contains a P line setting |
| -- the policy. |
| |
| Queuing_Policy_Specified : Character := ' '; |
| -- Set to blank by Initialize_ALI. Set to the appropriate queuing policy |
| -- character if an ali file contains a P line setting the queuing policy. |
| |
| Cumulative_Restrictions : Restrictions_Info := No_Restrictions; |
| -- This variable records the cumulative contributions of R lines in all |
| -- ali files, showing whether a restriction pragma exists anywhere, and |
| -- accumulating the aggregate knowledge of violations. |
| |
| SSO_Default_Specified : Boolean := False; |
| -- Set to True if at least one ALI file contains an OH/OL flag indicating |
| -- that it was compiled with a configuration pragmas file containing the |
| -- pragma Default_Scalar_Storage_Order (OH/OL present in ALI file P line). |
| |
| Stack_Check_Switch_Set : Boolean := False; |
| -- Set to True if at least one ALI file contains '-fstack-check' in its |
| -- argument list. |
| |
| Task_Dispatching_Policy_Specified : Character := ' '; |
| -- Set to blank by Initialize_ALI. Set to the appropriate task dispatching |
| -- policy character if an ali file contains a P line setting the |
| -- task dispatching policy. |
| |
| Unreserve_All_Interrupts_Specified : Boolean := False; |
| -- Set to False by Initialize_ALI. Set to True if an ali file is read that |
| -- has P line specifying unreserve all interrupts mode. |
| |
| Zero_Cost_Exceptions_Specified : Boolean := False; |
| -- Set to False by Initialize_ALI. Set to True if an ali file is read that |
| -- has a P line specifying the generation of zero cost exceptions. |
| |
| ----------------- |
| -- Withs Table -- |
| ----------------- |
| |
| -- Each With line (W line) in an ALI file generates a Withs table entry |
| |
| -- Note: there will be no entries in this table if 'W' lines are ignored |
| |
| No_With_Id : constant With_Id := With_Id'First; |
| -- Special value indicating no withs table entry |
| |
| First_With_Entry : constant With_Id := No_With_Id + 1; |
| -- Id of first actual entry in table |
| |
| type With_Record is record |
| Uname : Unit_Name_Type; |
| -- Name of Unit |
| |
| Sfile : File_Name_Type; |
| -- Name of source file, set to No_File in generic case |
| |
| Afile : File_Name_Type; |
| -- Name of ALI file, set to No_File in generic case |
| |
| Elaborate : Boolean; |
| -- Indicates presence of E parameter |
| |
| Elaborate_All : Boolean; |
| -- Indicates presence of EA parameter |
| |
| Elab_All_Desirable : Boolean; |
| -- Indicates presence of AD parameter |
| |
| Elab_Desirable : Boolean; |
| -- Indicates presence of ED parameter |
| |
| SAL_Interface : Boolean := False; |
| -- True if the Unit is an Interface of a Stand-Alone Library |
| |
| Implicit_With : Boolean := False; |
| -- True if this is an implicit with generated by the compiler |
| |
| Limited_With : Boolean := False; |
| -- True if this is a limited_with_clause |
| end record; |
| |
| package Withs is new Table.Table ( |
| Table_Component_Type => With_Record, |
| Table_Index_Type => With_Id, |
| Table_Low_Bound => First_With_Entry, |
| Table_Initial => 5000, |
| Table_Increment => 200, |
| Table_Name => "Withs"); |
| |
| --------------------- |
| -- Arguments Table -- |
| --------------------- |
| |
| -- Each Arg line (A line) in an ALI file generates an Args table entry |
| |
| -- Note: there will be no entries in this table if 'A' lines are ignored |
| |
| No_Arg_Id : constant Arg_Id := Arg_Id'First; |
| -- Special value indicating no args table entry |
| |
| First_Arg_Entry : constant Arg_Id := No_Arg_Id + 1; |
| -- Id of first actual entry in table |
| |
| package Args is new Table.Table ( |
| Table_Component_Type => String_Ptr, |
| Table_Index_Type => Arg_Id, |
| Table_Low_Bound => First_Arg_Entry, |
| Table_Initial => 1000, |
| Table_Increment => 100, |
| Table_Name => "Args"); |
| |
| -------------------------- |
| -- Linker_Options Table -- |
| -------------------------- |
| |
| -- If an ALI file has one of more Linker_Options lines, then a single |
| -- entry is made in this table. If more than one Linker_Options lines |
| -- appears in a given ALI file, then the arguments are concatenated |
| -- to form the entry in this table, using a NUL character as the |
| -- separator, and a final NUL character is appended to the end. |
| |
| -- Note: there will be no entries in this table if 'L' lines are ignored |
| |
| type Linker_Option_Record is record |
| Name : Name_Id; |
| -- Name entry containing concatenated list of Linker_Options |
| -- arguments separated by NUL and ended by NUL as described above. |
| |
| Unit : Unit_Id; |
| -- Unit_Id for the entry |
| |
| Internal_File : Boolean; |
| -- Set True if the linker options are from an internal file. This is |
| -- used to insert certain standard entries after all the user entries |
| -- but before the entries from the run-time. |
| end record; |
| |
| -- The indexes of active entries in this table range from 1 to the value of |
| -- Linker_Options.Last. The zeroth element is for convenience if the table |
| -- needs to be sorted. |
| |
| package Linker_Options is new Table.Table ( |
| Table_Component_Type => Linker_Option_Record, |
| Table_Index_Type => Integer, |
| Table_Low_Bound => 0, |
| Table_Initial => 200, |
| Table_Increment => 400, |
| Table_Name => "Linker_Options"); |
| |
| ----------------- |
| -- Notes Table -- |
| ----------------- |
| |
| -- The notes table records entries from N lines |
| |
| type Notes_Record is record |
| Pragma_Type : Character; |
| -- 'A', 'C', 'I', 'S', 'T' for Annotate/Comment/Ident/Subtitle/Title |
| |
| Pragma_Line : Nat; |
| -- Line number of pragma |
| |
| Pragma_Col : Nat; |
| -- Column number of pragma |
| |
| Pragma_Source_File : File_Name_Type; |
| -- Source file of pragma |
| |
| Pragma_Args : Name_Id; |
| -- Pragma arguments. No_Name if no arguments, otherwise a single |
| -- name table entry consisting of all the characters on the notes |
| -- line from the first non-blank character following the source |
| -- location to the last character on the line. |
| end record; |
| |
| -- The indexes of active entries in this table range from 1 to the value of |
| -- Notes.Last. The zeroth element is for convenience if the table needs to |
| -- be sorted. |
| |
| package Notes is new Table.Table ( |
| Table_Component_Type => Notes_Record, |
| Table_Index_Type => Integer, |
| Table_Low_Bound => 0, |
| Table_Initial => 200, |
| Table_Increment => 400, |
| Table_Name => "Notes"); |
| |
| ------------------------------------------- |
| -- External Version Reference Hash Table -- |
| ------------------------------------------- |
| |
| -- This hash table keeps track of external version reference strings |
| -- as read from E lines in the ali file. The stored values do not |
| -- include the terminating quote characters. |
| |
| -- Note: there will be no entries in this table if 'E' lines are ignored |
| |
| type Vindex is range 0 .. 98; |
| -- Type to define range of headers |
| |
| function SHash (S : String_Ptr) return Vindex; |
| -- Hash function for this table |
| |
| function SEq (F1, F2 : String_Ptr) return Boolean; |
| -- Equality function for this table |
| |
| package Version_Ref is new Simple_HTable ( |
| Header_Num => Vindex, |
| Element => Boolean, |
| No_Element => False, |
| Key => String_Ptr, |
| Hash => SHash, |
| Equal => SEq); |
| |
| ------------------------- |
| -- No_Dependency Table -- |
| ------------------------- |
| |
| -- Each R line for a No_Dependency Restriction generates an entry in |
| -- this No_Dependency table. |
| |
| type No_Dep_Record is record |
| ALI_File : ALI_Id; |
| -- ALI File containing the entry |
| |
| No_Dep_Unit : Name_Id; |
| -- Id for names table entry including entire name, including periods |
| end record; |
| |
| package No_Deps is new Table.Table ( |
| Table_Component_Type => No_Dep_Record, |
| Table_Index_Type => Integer, |
| Table_Low_Bound => 0, |
| Table_Initial => 200, |
| Table_Increment => 400, |
| Table_Name => "No_Deps"); |
| |
| ------------------------------------ |
| -- Sdep (Source Dependency) Table -- |
| ------------------------------------ |
| |
| -- Each source dependency (D line) in an ALI file generates an entry in the |
| -- Sdep table. |
| |
| -- Note: there will be no entries in this table if 'D' lines are ignored |
| |
| No_Sdep_Id : constant Sdep_Id := Sdep_Id'First; |
| -- Special value indicating no Sdep table entry |
| |
| First_Sdep_Entry : Sdep_Id := No_Sdep_Id + 1; |
| -- Id of first Sdep entry for current ali file. This is initialized to the |
| -- first Sdep entry in the table, and then incremented appropriately as |
| -- successive ALI files are scanned. |
| |
| type Sdep_Record is record |
| Sfile : File_Name_Type; |
| -- Name of source file |
| |
| Stamp : Time_Stamp_Type; |
| -- Time stamp value. Note that this will be all zero characters for the |
| -- dummy entries for missing or non-dependent files. |
| |
| Checksum : Word; |
| -- Checksum value. Note that this will be all zero characters for the |
| -- dummy entries for missing or non-dependent files |
| |
| Dummy_Entry : Boolean; |
| -- Set True for dummy entries that correspond to missing files or files |
| -- where no dependency relationship exists. |
| |
| Subunit_Name : Name_Id; |
| -- Name_Id for subunit name if present, else No_Name |
| |
| Unit_Name : Name_Id; |
| -- Name_Id for the unit name if not a subunit (No_Name for a subunit) |
| |
| Rfile : File_Name_Type; |
| -- Reference file name. Same as Sfile unless a Source_Reference pragma |
| -- was used, in which case it reflects the name used in the pragma. |
| |
| Start_Line : Nat; |
| -- Starting line number in file. Always 1, unless a Source_Reference |
| -- pragma was used, in which case it reflects the line number value |
| -- given in the pragma. |
| |
| end record; |
| |
| package Sdep is new Table.Table ( |
| Table_Component_Type => Sdep_Record, |
| Table_Index_Type => Sdep_Id, |
| Table_Low_Bound => First_Sdep_Entry, |
| Table_Initial => 5000, |
| Table_Increment => 200, |
| Table_Name => "Sdep"); |
| |
| ---------------------------- |
| -- Use of Name Table Info -- |
| ---------------------------- |
| |
| -- All unit names and file names are entered into the Names table. The Info |
| -- fields of these entries are used as follows: |
| |
| -- Unit name Info field has Unit_Id of unit table entry |
| -- ALI file name Info field has ALI_Id of ALI table entry |
| -- Source file name Info field has Source_Id of source table entry |
| |
| -------------------------- |
| -- Cross-Reference Data -- |
| -------------------------- |
| |
| -- The following table records cross-reference sections, there is one entry |
| -- for each X header line in the ALI file for an xref section. |
| |
| -- Note: there will be no entries in this table if 'X' lines are ignored |
| |
| type Xref_Section_Record is record |
| File_Num : Sdep_Id; |
| -- Dependency number for file (entry in Sdep.Table) |
| |
| File_Name : File_Name_Type; |
| -- Name of file |
| |
| First_Entity : Nat; |
| -- First entry in Xref_Entity table |
| |
| Last_Entity : Nat; |
| -- Last entry in Xref_Entity table |
| end record; |
| |
| package Xref_Section is new Table.Table ( |
| Table_Component_Type => Xref_Section_Record, |
| Table_Index_Type => Nat, |
| Table_Low_Bound => 1, |
| Table_Initial => 50, |
| Table_Increment => 300, |
| Table_Name => "Xref_Section"); |
| |
| -- The following is used to indicate whether a typeref field is present |
| -- for the entity, and if so what kind of typeref field. |
| |
| type Tref_Kind is ( |
| Tref_None, -- No typeref present |
| Tref_Access, -- Access type typeref (points to designated type) |
| Tref_Derived, -- Derived type typeref (points to parent type) |
| Tref_Type); -- All other cases |
| |
| type Visibility_Kind is |
| (Global, -- Library level entity |
| Static, -- Static C/C++ entity |
| Other); -- Local and other entity |
| |
| -- The following table records entities for which xrefs are recorded |
| |
| type Xref_Entity_Record is record |
| Line : Pos; |
| -- Line number of definition |
| |
| Etype : Character; |
| -- Set to the identification character for the entity. See section |
| -- "Cross-Reference Entity Identifiers" in lib-xref.ads for details. |
| |
| Col : Pos; |
| -- Column number of definition |
| |
| Visibility : Visibility_Kind; |
| -- Visibility of entity |
| |
| Entity : Name_Id; |
| -- Name of entity |
| |
| Iref_File_Num : Sdep_Id; |
| -- This field is set to the dependency reference for the file containing |
| -- the generic entity that this one instantiates, or to No_Sdep_Id if |
| -- the current entity is not an instantiation |
| |
| Iref_Line : Nat; |
| -- This field is set to the line number in Iref_File_Num of the generic |
| -- entity that this one instantiates, or to zero if the current entity |
| -- is not an instantiation. |
| |
| Rref_Line : Nat; |
| -- This field is set to the line number of a renaming reference if |
| -- one is present, or to zero if no renaming reference is present |
| |
| Rref_Col : Nat; |
| -- This field is set to the column number of a renaming reference |
| -- if one is present, or to zero if no renaming reference is present. |
| |
| Tref : Tref_Kind; |
| -- Indicates if a typeref is present, and if so what kind. Set to |
| -- Tref_None if no typeref field is present. |
| |
| Tref_File_Num : Sdep_Id; |
| -- This field is set to No_Sdep_Id if no typeref is present, or |
| -- if the typeref refers to an entity in standard. Otherwise it |
| -- it is the dependency reference for the file containing the |
| -- declaration of the typeref entity. |
| |
| Tref_Line : Nat; |
| -- This field is set to zero if no typeref is present, or if the |
| -- typeref refers to an entity in standard. Otherwise it contains |
| -- the line number of the declaration of the typeref entity. |
| |
| Tref_Type : Character; |
| -- This field is set to blank if no typeref is present, or if the |
| -- typeref refers to an entity in standard. Otherwise it contains |
| -- the identification character for the typeref entity. See section |
| -- "Cross-Reference Entity Identifiers" in lib-xref.ads for details. |
| |
| Tref_Col : Nat; |
| -- This field is set to zero if no typeref is present, or if the |
| -- typeref refers to an entity in standard. Otherwise it contains |
| -- the column number of the declaration of the parent type. |
| |
| Tref_Standard_Entity : Name_Id; |
| -- This field is set to No_Name if no typeref is present or if the |
| -- typeref refers to a declared entity rather than an entity in |
| -- package Standard. If there is a typeref that references an |
| -- entity in package Standard, then this field is a Name_Id |
| -- reference for the entity name. |
| |
| Oref_File_Num : Sdep_Id; |
| -- This field is set to No_Sdep_Id if the entity doesn't override any |
| -- other entity, or to the dependency reference for the overridden |
| -- entity. |
| |
| Oref_Line : Nat; |
| Oref_Col : Nat; |
| -- These two fields are set to the line and column of the overridden |
| -- entity. |
| |
| First_Xref : Nat; |
| -- Index into Xref table of first cross-reference |
| |
| Last_Xref : Nat; |
| -- Index into Xref table of last cross-reference. The value in |
| -- Last_Xref can be less than the First_Xref value to indicate |
| -- that no entries are present in the Xref Table. |
| end record; |
| |
| package Xref_Entity is new Table.Table ( |
| Table_Component_Type => Xref_Entity_Record, |
| Table_Index_Type => Nat, |
| Table_Low_Bound => 1, |
| Table_Initial => 500, |
| Table_Increment => 300, |
| Table_Name => "Xref_Entity"); |
| |
| Array_Index_Reference : constant Character := '*'; |
| Interface_Reference : constant Character := 'I'; |
| -- Some special types of references. In the ALI file itself, these |
| -- are output as attributes of the entity, not as references, but |
| -- there is no provision in Xref_Entity_Record for storing multiple |
| -- such references. |
| |
| -- The following table records actual cross-references |
| |
| type Xref_Record is record |
| File_Num : Sdep_Id; |
| -- Set to the file dependency number for the cross-reference. Note |
| -- that if no file entry is present explicitly, this is just a copy |
| -- of the reference for the current cross-reference section. |
| |
| Line : Nat; |
| -- Line number for the reference. This is zero when referencing a |
| -- predefined entity, but in this case Name is set. |
| |
| Rtype : Character; |
| -- Indicates type of reference, using code used in ALI file: |
| -- r = reference |
| -- m = modification |
| -- b = body entity |
| -- c = completion of private or incomplete type |
| -- x = type extension |
| -- i = implicit reference |
| -- Array_Index_Reference = reference to the index of an array |
| -- Interface_Reference = reference to an interface implemented |
| -- by the type |
| -- See description in lib-xref.ads for further details |
| |
| Col : Nat; |
| -- Column number for the reference |
| |
| Name : Name_Id := No_Name; |
| -- This is only used when referencing a predefined entity. Currently, |
| -- this only occurs for array indexes. |
| |
| -- Note: for instantiation references, Rtype is set to ' ', and Col is |
| -- set to zero. One or more such entries can follow any other reference. |
| -- When there is more than one such entry, this is to be read as: |
| -- e.g. ref1 ref2 ref3 |
| -- ref1 is a reference to an entity that was instantied at ref2. |
| -- ref2 itself is also the result of an instantiation, that took |
| -- place at ref3 |
| |
| Imported_Lang : Name_Id := No_Name; |
| Imported_Name : Name_Id := No_Name; |
| -- Language and name of imported entity reference |
| end record; |
| |
| package Xref is new Table.Table ( |
| Table_Component_Type => Xref_Record, |
| Table_Index_Type => Nat, |
| Table_Low_Bound => 1, |
| Table_Initial => 2000, |
| Table_Increment => 300, |
| Table_Name => "Xref"); |
| |
| ---------------------------- |
| -- Invocation Graph Types -- |
| ---------------------------- |
| |
| -- The following type identifies an invocation construct |
| |
| No_Invocation_Construct : constant Invocation_Construct_Id := |
| Invocation_Construct_Id'First; |
| First_Invocation_Construct : constant Invocation_Construct_Id := |
| No_Invocation_Construct + 1; |
| |
| -- The following type identifies an invocation relation |
| |
| No_Invocation_Relation : constant Invocation_Relation_Id := |
| Invocation_Relation_Id'First; |
| First_Invocation_Relation : constant Invocation_Relation_Id := |
| No_Invocation_Relation + 1; |
| |
| -- The following type identifies an invocation signature |
| |
| No_Invocation_Signature : constant Invocation_Signature_Id := |
| Invocation_Signature_Id'First; |
| First_Invocation_Signature : constant Invocation_Signature_Id := |
| No_Invocation_Signature + 1; |
| |
| -- The following type enumerates all possible placements of an invocation |
| -- construct's spec and body with respect to the unit it is declared in. |
| |
| type Declaration_Placement_Kind is |
| (In_Body, |
| -- The declaration of the invocation construct is within the body of the |
| -- unit it is declared in. |
| |
| In_Spec, |
| -- The declaration of the invocation construct is within the spec of the |
| -- unit it is declared in. |
| |
| No_Declaration_Placement); |
| -- The invocation construct does not have a declaration |
| |
| -- The following type enumerates all possible invocation construct kinds |
| |
| type Invocation_Construct_Kind is |
| (Elaborate_Body_Procedure, |
| -- The invocation construct denotes the procedure which elaborates a |
| -- package body. |
| |
| Elaborate_Spec_Procedure, |
| -- The invocation construct denotes the procedure which elaborates a |
| -- package spec. |
| |
| Regular_Construct); |
| -- The invocation construct is a normal invocation construct |
| |
| -- The following type enumerates all possible invocation kinds |
| |
| type Invocation_Kind is |
| (Accept_Alternative, |
| Access_Taken, |
| Call, |
| Controlled_Adjustment, |
| Controlled_Finalization, |
| Controlled_Initialization, |
| Default_Initial_Condition_Verification, |
| Initial_Condition_Verification, |
| Instantiation, |
| Internal_Controlled_Adjustment, |
| Internal_Controlled_Finalization, |
| Internal_Controlled_Initialization, |
| Invariant_Verification, |
| Postcondition_Verification, |
| Protected_Entry_Call, |
| Protected_Subprogram_Call, |
| Task_Activation, |
| Task_Entry_Call, |
| Type_Initialization, |
| No_Invocation); |
| |
| subtype Internal_Controlled_Invocation_Kind is Invocation_Kind range |
| Internal_Controlled_Adjustment .. |
| -- Internal_Controlled_Finalization |
| Internal_Controlled_Initialization; |
| |
| -- The following type enumerates all possible invocation-graph ALI lines |
| |
| type Invocation_Graph_Line_Kind is |
| (Invocation_Construct_Line, |
| Invocation_Graph_Attributes_Line, |
| Invocation_Relation_Line); |
| |
| ---------------------------------- |
| -- Invocation Graph Subprograms -- |
| ---------------------------------- |
| |
| procedure Add_Invocation_Construct |
| (Body_Placement : Declaration_Placement_Kind; |
| Kind : Invocation_Construct_Kind; |
| Signature : Invocation_Signature_Id; |
| Spec_Placement : Declaration_Placement_Kind; |
| Update_Units : Boolean := True); |
| pragma Inline (Add_Invocation_Construct); |
| -- Add a new invocation construct described by its attributes. Update_Units |
| -- should be set when this addition must be reflected in the attributes of |
| -- the current unit. |
| |
| procedure Add_Invocation_Relation |
| (Extra : Name_Id; |
| Invoker : Invocation_Signature_Id; |
| Kind : Invocation_Kind; |
| Target : Invocation_Signature_Id; |
| Update_Units : Boolean := True); |
| pragma Inline (Add_Invocation_Relation); |
| -- Add a new invocation relation described by its attributes. Update_Units |
| -- should be set when this addition must be reflected in the attributes of |
| -- the current unit. |
| |
| function Body_Placement |
| (IC_Id : Invocation_Construct_Id) return Declaration_Placement_Kind; |
| pragma Inline (Body_Placement); |
| -- Obtain the location of invocation construct IC_Id's body with respect to |
| -- the unit where it is declared. |
| |
| function Code_To_Declaration_Placement_Kind |
| (Code : Character) return Declaration_Placement_Kind; |
| pragma Inline (Code_To_Declaration_Placement_Kind); |
| -- Obtain the declaration placement kind of character encoding Code |
| |
| function Code_To_Invocation_Construct_Kind |
| (Code : Character) return Invocation_Construct_Kind; |
| pragma Inline (Code_To_Invocation_Construct_Kind); |
| -- Obtain the invocation construct kind of character encoding Code |
| |
| function Code_To_Invocation_Graph_Encoding_Kind |
| (Code : Character) return Invocation_Graph_Encoding_Kind; |
| pragma Inline (Code_To_Invocation_Graph_Encoding_Kind); |
| -- Obtain the invocation-graph encoding kind of character encoding Code |
| |
| function Code_To_Invocation_Kind |
| (Code : Character) return Invocation_Kind; |
| pragma Inline (Code_To_Invocation_Kind); |
| -- Obtain the invocation kind of character encoding Code |
| |
| function Code_To_Invocation_Graph_Line_Kind |
| (Code : Character) return Invocation_Graph_Line_Kind; |
| pragma Inline (Code_To_Invocation_Graph_Line_Kind); |
| -- Obtain the invocation-graph line kind of character encoding Code |
| |
| function Column (IS_Id : Invocation_Signature_Id) return Nat; |
| pragma Inline (Column); |
| -- Obtain the column number of invocation signature IS_Id |
| |
| function Declaration_Placement_Kind_To_Code |
| (Kind : Declaration_Placement_Kind) return Character; |
| pragma Inline (Declaration_Placement_Kind_To_Code); |
| -- Obtain the character encoding of declaration placement kind Kind |
| |
| function Extra (IR_Id : Invocation_Relation_Id) return Name_Id; |
| pragma Inline (Extra); |
| -- Obtain the name of the additional entity used in error diagnostics for |
| -- invocation relation IR_Id. |
| |
| type Invocation_Construct_Processor_Ptr is |
| access procedure (IC_Id : Invocation_Construct_Id); |
| |
| procedure For_Each_Invocation_Construct |
| (Processor : Invocation_Construct_Processor_Ptr); |
| pragma Inline (For_Each_Invocation_Construct); |
| -- Invoke Processor on each invocation construct |
| |
| procedure For_Each_Invocation_Construct |
| (U_Id : Unit_Id; |
| Processor : Invocation_Construct_Processor_Ptr); |
| pragma Inline (For_Each_Invocation_Construct); |
| -- Invoke Processor on each invocation construct of unit U_Id |
| |
| type Invocation_Relation_Processor_Ptr is |
| access procedure (IR_Id : Invocation_Relation_Id); |
| |
| procedure For_Each_Invocation_Relation |
| (Processor : Invocation_Relation_Processor_Ptr); |
| pragma Inline (For_Each_Invocation_Relation); |
| -- Invoke Processor on each invocation relation |
| |
| procedure For_Each_Invocation_Relation |
| (U_Id : Unit_Id; |
| Processor : Invocation_Relation_Processor_Ptr); |
| pragma Inline (For_Each_Invocation_Relation); |
| -- Invoke Processor on each invocation relation of unit U_Id |
| |
| function Invocation_Construct_Kind_To_Code |
| (Kind : Invocation_Construct_Kind) return Character; |
| pragma Inline (Invocation_Construct_Kind_To_Code); |
| -- Obtain the character encoding of invocation kind Kind |
| |
| function Invocation_Graph_Encoding return Invocation_Graph_Encoding_Kind; |
| pragma Inline (Invocation_Graph_Encoding); |
| -- Obtain the encoding format used to capture information about the |
| -- invocation constructs and relations within the ALI file of the main |
| -- unit. |
| |
| function Invocation_Graph_Encoding_Kind_To_Code |
| (Kind : Invocation_Graph_Encoding_Kind) return Character; |
| pragma Inline (Invocation_Graph_Encoding_Kind_To_Code); |
| -- Obtain the character encoding for invocation-graph encoding kind Kind |
| |
| function Invocation_Graph_Line_Kind_To_Code |
| (Kind : Invocation_Graph_Line_Kind) return Character; |
| pragma Inline (Invocation_Graph_Line_Kind_To_Code); |
| -- Obtain the character encoding for invocation line kind Kind |
| |
| function Invocation_Kind_To_Code |
| (Kind : Invocation_Kind) return Character; |
| pragma Inline (Invocation_Kind_To_Code); |
| -- Obtain the character encoding of invocation kind Kind |
| |
| function Invocation_Signature_Of |
| (Column : Nat; |
| Line : Nat; |
| Locations : Name_Id; |
| Name : Name_Id; |
| Scope : Name_Id) return Invocation_Signature_Id; |
| pragma Inline (Invocation_Signature_Of); |
| -- Obtain the invocation signature that corresponds to the input attributes |
| |
| function Invoker |
| (IR_Id : Invocation_Relation_Id) return Invocation_Signature_Id; |
| pragma Inline (Invoker); |
| -- Obtain the signature of the invocation relation IR_Id's invoker |
| |
| function Kind |
| (IC_Id : Invocation_Construct_Id) return Invocation_Construct_Kind; |
| pragma Inline (Kind); |
| -- Obtain the nature of invocation construct IC_Id |
| |
| function Kind |
| (IR_Id : Invocation_Relation_Id) return Invocation_Kind; |
| pragma Inline (Kind); |
| -- Obtain the nature of invocation relation IR_Id |
| |
| function Line (IS_Id : Invocation_Signature_Id) return Nat; |
| pragma Inline (Line); |
| -- Obtain the line number of invocation signature IS_Id |
| |
| function Locations (IS_Id : Invocation_Signature_Id) return Name_Id; |
| pragma Inline (Locations); |
| -- Obtain the sequence of column and line numbers within nested instances |
| -- of invocation signature IS_Id |
| |
| function Name (IS_Id : Invocation_Signature_Id) return Name_Id; |
| pragma Inline (Name); |
| -- Obtain the name of invocation signature IS_Id |
| |
| function IS_Scope (IS_Id : Invocation_Signature_Id) return Name_Id; |
| pragma Inline (IS_Scope); |
| -- Obtain the scope of invocation signature IS_Id |
| |
| procedure Set_Invocation_Graph_Encoding |
| (Kind : Invocation_Graph_Encoding_Kind; |
| Update_Units : Boolean := True); |
| pragma Inline (Set_Invocation_Graph_Encoding); |
| -- Set the encoding format used to capture information about the invocation |
| -- constructs and relations within the ALI file of the main unit to Kind. |
| -- Update_Units should be set when this action must be reflected in the |
| -- attributes of the current unit. |
| |
| function Signature |
| (IC_Id : Invocation_Construct_Id) return Invocation_Signature_Id; |
| pragma Inline (Signature); |
| -- Obtain the signature of invocation construct IC_Id |
| |
| function Spec_Placement |
| (IC_Id : Invocation_Construct_Id) return Declaration_Placement_Kind; |
| pragma Inline (Spec_Placement); |
| -- Obtain the location of invocation construct IC_Id's spec with respect to |
| -- the unit where it is declared. |
| |
| function Target |
| (IR_Id : Invocation_Relation_Id) return Invocation_Signature_Id; |
| pragma Inline (Target); |
| -- Obtain the signature of the invocation relation IR_Id's target |
| |
| -------------------------------------- |
| -- Subprograms for Reading ALI File -- |
| -------------------------------------- |
| |
| procedure Initialize_ALI; |
| -- Initialize the ALI tables. Also resets all switch values to defaults |
| |
| function Scan_ALI |
| (F : File_Name_Type; |
| T : Text_Buffer_Ptr; |
| Err : Boolean; |
| Ignore_Lines : String := "X"; |
| Ignore_Errors : Boolean := False; |
| Directly_Scanned : Boolean := False) return ALI_Id; |
| -- Given the text, T, of an ALI file, F, scan and store the information |
| -- from the file, and return the Id of the resulting entry in the ALI |
| -- table. Switch settings may be modified as described above in the |
| -- switch description settings. |
| -- |
| -- Err determines the action taken on an incorrectly formatted file. |
| -- If Err is False, then an error message is output, and the program |
| -- is terminated. If Err is True, then no error message is output, |
| -- and No_ALI_Id is returned. |
| -- |
| -- Ignore_Lines requests that Scan_ALI ignore any lines that start |
| -- with any given key character. The default value of X causes all |
| -- Xref lines to be ignored. The corresponding data in the ALI |
| -- tables will not be filled in this case. It is not possible |
| -- to ignore U (unit) lines, they are always read. |
| -- |
| -- Ignore_Errors is normally False. If it is set True, then Scan_ALI |
| -- will do its best to scan through a file and extract all information |
| -- it can, even if there are errors. In this case Err is only set if |
| -- Scan_ALI was completely unable to process the file (e.g. it did not |
| -- look like an ALI file at all). Ignore_Errors is intended to improve |
| -- the downward compatibility of new compilers with old tools. |
| -- |
| -- Directly_Scanned is normally False. If it is set to True, then the |
| -- units (spec and/or body) corresponding to the ALI file are marked as |
| -- such. It is used to decide for what units gnatbind should generate |
| -- the symbols corresponding to 'Version or 'Body_Version in |
| -- Stand-Alone Libraries. |
| |
| end ALI; |