;; Predicate definitions for ARM and Thumb ;; Copyright (C) 2004-2021 Free Software Foundation, Inc. ;; Contributed by ARM Ltd.

;; This file is part of GCC.

;; GCC is free software; you can redistribute it and/or modify it ;; under the terms of the GNU General Public License as published ;; by the Free Software Foundation; either version 3, or (at your ;; option) any later version.

;; GCC is distributed in the hope that it will be useful, but WITHOUT ;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ;; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public ;; License for more details.

;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; http://www.gnu.org/licenses/.

(include “common.md”)

(define_predicate “s_register_operand” (match_code “reg,subreg”) { if (GET_CODE (op) == SUBREG) op = SUBREG_REG (op); /* We don't consider registers whose class is NO_REGS to be a register operand. / / XXX might have to check for lo regs only for thumb ??? */ return (REG_P (op) && (REGNO (op) >= FIRST_PSEUDO_REGISTER || REGNO_REG_CLASS (REGNO (op)) != NO_REGS)); })

(define_predicate “mve_memory_operand” (and (match_code “mem”) (match_test “TARGET_32BIT && mve_vector_mem_operand (GET_MODE (op), XEXP (op, 0), false)”)))

(define_predicate “mve_scatter_memory” (and (match_code “mem”) (match_test “TARGET_HAVE_MVE && REG_P (XEXP (op, 0)) && mve_vector_mem_operand (GET_MODE (op), XEXP (op, 0), false)”)))

;; True for immediates in the range of 1 to 16 for MVE. (define_predicate “mve_imm_16” (match_test “satisfies_constraint_Rd (op)”))

;; True for immediates in the range of 0 to 7 for MVE. (define_predicate “mve_imm_7” (match_test “satisfies_constraint_Ra (op)”))

;; True for immediates in the range of 1 to 8 for MVE. (define_predicate “mve_imm_8” (match_test “satisfies_constraint_Rb (op)”))

;; True for immediates in the range of 0 to 15 for MVE. (define_predicate “mve_imm_15” (match_test “satisfies_constraint_Rc (op)”))

;; True for immediates in the range of 0 to 31 for MVE. (define_predicate “mve_imm_31” (match_test “satisfies_constraint_Re (op)”))

;; True for immediates in the range of 1 to 32 for MVE. (define_predicate “mve_imm_32” (match_test “satisfies_constraint_Rf (op)”))

;; True if the immediate is one among 1, 2, 4 or 8 for MVE. (define_predicate “mve_imm_selective_upto_8” (match_test “satisfies_constraint_Rg (op)”))

;; True if the immediate is the range +/- 1016 and multiple of 8 for MVE. (define_constraint “Ri” “@internal In Thumb-2 state a constant is multiple of 8 and in range of -/+ 1016 for MVE” (and (match_code “const_int”) (match_test “TARGET_HAVE_MVE && (-1016 <= ival) && (ival <= 1016) && ((ival % 8) == 0)”)))

; Predicate for stack protector guard's address in ; stack_protect_combined_set_insn and stack_protect_combined_test_insn patterns (define_predicate “guard_addr_operand” (match_test “true”) { return (CONSTANT_ADDRESS_P (op) || !targetm.cannot_force_const_mem (mode, op)); })

; Predicate for stack protector guard in stack_protect_combined_set and ; stack_protect_combined_test patterns (define_predicate “guard_operand” (match_code “mem”) { return guard_addr_operand (XEXP (op, 0), mode); })

(define_predicate “vpr_register_operand” (match_code “reg”) { return REG_P (op) && (REGNO (op) >= FIRST_PSEUDO_REGISTER || IS_VPR_REGNUM (REGNO (op))); })

(define_predicate “imm_for_neon_inv_logic_operand” (match_code “const_vector”) { return ((TARGET_NEON || TARGET_HAVE_MVE) && neon_immediate_valid_for_logic (op, mode, 1, NULL, NULL)); })

(define_predicate “neon_inv_logic_op2” (ior (match_operand 0 “imm_for_neon_inv_logic_operand”) (match_operand 0 “s_register_operand”)))

(define_predicate “imm_for_neon_logic_operand” (match_code “const_vector”) { return ((TARGET_NEON || TARGET_HAVE_MVE) && neon_immediate_valid_for_logic (op, mode, 0, NULL, NULL)); })

(define_predicate “neon_logic_op2” (ior (match_operand 0 “imm_for_neon_logic_operand”) (match_operand 0 “s_register_operand”)))

;; Any general register. (define_predicate “arm_hard_general_register_operand” (match_code “reg”) { return REGNO (op) <= LAST_ARM_REGNUM; })

;; A low register. (define_predicate “low_register_operand” (and (match_code “reg”) (match_test “REGNO (op) <= LAST_LO_REGNUM”)))

;; A low register or const_int. (define_predicate “low_reg_or_int_operand” (ior (match_code “const_int”) (match_operand 0 “low_register_operand”)))

;; Any core register, or any pseudo. */ (define_predicate “arm_general_register_operand” (match_code “reg,subreg”) { if (GET_CODE (op) == SUBREG) op = SUBREG_REG (op);

return (REG_P (op) && (REGNO (op) <= LAST_ARM_REGNUM || REGNO (op) >= FIRST_PSEUDO_REGISTER)); })

;; Low core register, or any pseudo. (define_predicate “arm_low_register_operand” (match_code “reg,subreg”) { if (GET_CODE (op) == SUBREG) op = SUBREG_REG (op);

return (REG_P (op) && (REGNO (op) <= LAST_LO_REGNUM || REGNO (op) >= FIRST_PSEUDO_REGISTER)); })

(define_predicate “arm_general_adddi_operand” (ior (match_operand 0 “arm_general_register_operand”) (and (match_code “const_int”) (match_test “const_ok_for_dimode_op (INTVAL (op), PLUS)”))))

(define_predicate “vfp_register_operand” (match_code “reg,subreg”) { if (GET_CODE (op) == SUBREG) op = SUBREG_REG (op);

/* We don't consider registers whose class is NO_REGS to be a register operand. */ return (REG_P (op) && (REGNO (op) >= FIRST_PSEUDO_REGISTER || REGNO_REG_CLASS (REGNO (op)) == VFP_D0_D7_REGS || REGNO_REG_CLASS (REGNO (op)) == VFP_LO_REGS || (TARGET_VFPD32 && REGNO_REG_CLASS (REGNO (op)) == VFP_HI_REGS))); })

(define_predicate “vfp_hard_register_operand” (match_code “reg”) { return (IS_VFP_REGNUM (REGNO (op))); })

(define_predicate “zero_operand” (and (match_code “const_int,const_double,const_vector”) (match_test “op == CONST0_RTX (mode)”)))

(define_predicate “minus_one_operand” (and (match_code “const_int,const_double,const_vector”) (match_test “op == CONSTM1_RTX (mode)”)))

;; Match a register, or zero in the appropriate mode. (define_predicate “reg_or_zero_operand” (ior (match_operand 0 “s_register_operand”) (match_operand 0 “zero_operand”)))

(define_special_predicate “subreg_lowpart_operator” (and (match_code “subreg”) (match_test “subreg_lowpart_p (op)”)))

;; Reg, subreg(reg) or const_int. (define_predicate “reg_or_int_operand” (ior (match_code “const_int”) (match_operand 0 “s_register_operand”)))

(define_predicate “arm_immediate_operand” (and (match_code “const_int”) (match_test “const_ok_for_arm (INTVAL (op))”)))

;; A constant value which fits into two instructions, each taking ;; an arithmetic constant operand for one of the words. (define_predicate “arm_immediate_di_operand” (and (match_code “const_int,const_double”) (match_test “arm_const_double_by_immediates (op)”)))

(define_predicate “arm_neg_immediate_operand” (and (match_code “const_int”) (match_test “const_ok_for_arm (-INTVAL (op))”)))

(define_predicate “arm_not_immediate_operand” (and (match_code “const_int”) (match_test “const_ok_for_arm (~INTVAL (op))”)))

(define_predicate “const0_operand” (match_test “op == CONST0_RTX (mode)”))

;; Something valid on the RHS of an ARM data-processing instruction (define_predicate “arm_rhs_operand” (ior (match_operand 0 “s_register_operand”) (match_operand 0 “arm_immediate_operand”)))

(define_predicate “arm_rhsm_operand” (ior (match_operand 0 “arm_rhs_operand”) (match_operand 0 “memory_operand”)))

(define_predicate “const_int_I_operand” (and (match_operand 0 “const_int_operand”) (match_test “satisfies_constraint_I (op)”)))

(define_predicate “const_int_M_operand” (and (match_operand 0 “const_int_operand”) (match_test “satisfies_constraint_M (op)”)))

(define_predicate “const_int_coproc_operand” (and (match_operand 0 “const_int_operand”) (match_test “IN_RANGE (UINTVAL (op), 0, ARM_CDE_CONST_COPROC)”) (match_test “arm_arch_cde_coproc_bits[UINTVAL (op)] & arm_arch_cde_coproc”)))

(define_predicate “const_int_ccde1_operand” (and (match_operand 0 “const_int_operand”) (match_test “IN_RANGE (UINTVAL (op), 0, ARM_CCDE_CONST_1)”)))

(define_predicate “const_int_ccde2_operand” (and (match_operand 0 “const_int_operand”) (match_test “IN_RANGE (UINTVAL (op), 0, ARM_CCDE_CONST_2)”)))

(define_predicate “const_int_ccde3_operand” (and (match_operand 0 “const_int_operand”) (match_test “IN_RANGE (UINTVAL (op), 0, ARM_CCDE_CONST_3)”)))

(define_predicate “const_int_vcde1_operand” (and (match_operand 0 “const_int_operand”) (match_test “IN_RANGE (UINTVAL (op), 0, ARM_VCDE_CONST_1)”)))

(define_predicate “const_int_vcde2_operand” (and (match_operand 0 “const_int_operand”) (match_test “IN_RANGE (UINTVAL (op), 0, ARM_VCDE_CONST_2)”)))

(define_predicate “const_int_vcde3_operand” (and (match_operand 0 “const_int_operand”) (match_test “IN_RANGE (UINTVAL (op), 0, ARM_VCDE_CONST_3)”)))

(define_predicate “const_int_mve_cde1_operand” (and (match_operand 0 “const_int_operand”) (match_test “IN_RANGE (UINTVAL (op), 0, ARM_MVE_CDE_CONST_1)”)))

(define_predicate “const_int_mve_cde2_operand” (and (match_operand 0 “const_int_operand”) (match_test “IN_RANGE (UINTVAL (op), 0, ARM_MVE_CDE_CONST_2)”)))

(define_predicate “const_int_mve_cde3_operand” (and (match_operand 0 “const_int_operand”) (match_test “IN_RANGE (UINTVAL (op), 0, ARM_MVE_CDE_CONST_3)”)))

;; This doesn't have to do much because the constant is already checked ;; in the shift_operator predicate. (define_predicate “shift_amount_operand” (ior (and (match_test “TARGET_ARM”) (match_operand 0 “s_register_operand”)) (match_operand 0 “const_int_operand”)))

(define_predicate “const_neon_scalar_shift_amount_operand” (and (match_code “const_int”) (match_test “IN_RANGE (UINTVAL (op), 1, GET_MODE_BITSIZE (mode))”)))

(define_predicate “ssat16_imm” (and (match_code “const_int”) (match_test “IN_RANGE (INTVAL (op), 1, 16)”)))

(define_predicate “usat16_imm” (and (match_code “const_int”) (match_test “IN_RANGE (INTVAL (op), 0, 15)”)))

(define_predicate “ldrd_strd_offset_operand” (and (match_operand 0 “const_int_operand”) (match_test “TARGET_LDRD && offset_ok_for_ldrd_strd (INTVAL (op))”)))

(define_predicate “arm_add_operand” (ior (match_operand 0 “arm_rhs_operand”) (match_operand 0 “arm_neg_immediate_operand”)))

(define_predicate “arm_adddi_operand” (ior (match_operand 0 “s_register_operand”) (and (match_code “const_int”) (match_test “const_ok_for_dimode_op (INTVAL (op), PLUS)”))))

(define_predicate “arm_anddi_operand” (ior (match_operand 0 “s_register_operand”) (and (match_code “const_int”) (match_test “const_ok_for_dimode_op (INTVAL (op), AND)”))))

(define_predicate “arm_iordi_operand” (ior (match_operand 0 “s_register_operand”) (and (match_code “const_int”) (match_test “const_ok_for_dimode_op (INTVAL (op), IOR)”))))

(define_predicate “arm_xordi_operand” (ior (match_operand 0 “s_register_operand”) (and (match_code “const_int”) (match_test “const_ok_for_dimode_op (INTVAL (op), XOR)”))))

(define_predicate “arm_addimm_operand” (ior (match_operand 0 “arm_immediate_operand”) (match_operand 0 “arm_neg_immediate_operand”)))

(define_predicate “arm_not_operand” (ior (match_operand 0 “arm_rhs_operand”) (match_operand 0 “arm_not_immediate_operand”)))

;; A constant that can be used with ADC(SBC) or SBC(ADC) when bit-wise ;; inverted. Similar to arm_not_operand, but excludes registers. (define_predicate “arm_adcimm_operand” (ior (match_operand 0 “arm_immediate_operand”) (match_operand 0 “arm_not_immediate_operand”)))

(define_predicate “arm_di_operand” (ior (match_operand 0 “s_register_operand”) (match_operand 0 “arm_immediate_di_operand”)))

;; True if the operand is a memory reference which contains an ;; offsettable address. (define_predicate “offsettable_memory_operand” (and (match_code “mem”) (match_test “offsettable_address_p (reload_completed | reload_in_progress, mode, XEXP (op, 0))”)))

;; True if the operand is a memory operand that does not have an ;; automodified base register (and thus will not generate output reloads). (define_predicate “call_memory_operand” (and (match_code “mem”) (and (match_test “GET_RTX_CLASS (GET_CODE (XEXP (op, 0))) != RTX_AUTOINC”) (match_operand 0 “memory_operand”))))

(define_predicate “arm_reload_memory_operand” (and (match_code “mem,reg,subreg”) (match_test “(!CONSTANT_P (op) && (true_regnum(op) == -1 || (REG_P (op) && REGNO (op) >= FIRST_PSEUDO_REGISTER)))”)))

(define_predicate “vfp_compare_operand” (ior (match_operand 0 “s_register_operand”) (and (match_code “const_double”) (match_test “arm_const_double_rtx (op)”))))

;; True for valid index operands. (define_predicate “index_operand” (ior (match_operand 0 “s_register_operand”) (and (match_operand 0 “immediate_operand”) (match_test “(!CONST_INT_P (op) || (INTVAL (op) < 4096 && INTVAL (op) > -4096))”))))

;; True for operators that can be combined with a shift in ARM state. (define_special_predicate “shiftable_operator” (and (match_code “plus,minus,ior,xor,and”) (match_test “mode == GET_MODE (op)”)))

(define_special_predicate “shiftable_operator_strict_it” (and (match_code “plus,and”) (match_test “mode == GET_MODE (op)”)))

;; True for logical binary operators. (define_special_predicate “logical_binary_operator” (and (match_code “ior,xor,and”) (match_test “mode == GET_MODE (op)”)))

;; True for commutative operators (define_special_predicate “commutative_binary_operator” (and (match_code “ior,xor,and,plus”) (match_test “mode == GET_MODE (op)”)))

;; True for shift operators. ;; Notes: ;; * mult is only permitted with a constant shift amount ;; * patterns that permit register shift amounts only in ARM mode use ;; shift_amount_operand, patterns that always allow registers do not, ;; so we don't have to worry about that sort of thing here. (define_special_predicate “shift_operator” (and (ior (ior (and (match_code “mult”) (match_test “power_of_two_operand (XEXP (op, 1), mode)”)) (and (match_code “rotate”) (match_test “CONST_INT_P (XEXP (op, 1)) && (UINTVAL (XEXP (op, 1))) < 32”))) (and (match_code “ashift,ashiftrt,lshiftrt,rotatert”) (match_test “!CONST_INT_P (XEXP (op, 1)) || (UINTVAL (XEXP (op, 1))) < 32”))) (match_test “mode == GET_MODE (op)”)))

(define_special_predicate “shift_nomul_operator” (and (ior (and (match_code “rotate”) (match_test “CONST_INT_P (XEXP (op, 1)) && (UINTVAL (XEXP (op, 1))) < 32”)) (and (match_code “ashift,ashiftrt,lshiftrt,rotatert”) (match_test “!CONST_INT_P (XEXP (op, 1)) || (UINTVAL (XEXP (op, 1))) < 32”))) (match_test “mode == GET_MODE (op)”)))

;; True for shift operators which can be used with saturation instructions. (define_special_predicate “sat_shift_operator” (and (ior (and (match_code “mult”) (match_test “power_of_two_operand (XEXP (op, 1), mode)”)) (and (match_code “ashift,ashiftrt”) (match_test “CONST_INT_P (XEXP (op, 1)) && (UINTVAL (XEXP (op, 1)) < 32)”))) (match_test “mode == GET_MODE (op)”)))

;; True for Armv8.1-M Mainline long shift instructions. (define_predicate “long_shift_imm” (match_test “satisfies_constraint_Pg (op)”))

(define_predicate “arm_reg_or_long_shift_imm” (ior (match_test “TARGET_THUMB2 && arm_general_register_operand (op, GET_MODE (op))”) (match_test “satisfies_constraint_Pg (op)”)))

;; True for MULT, to identify which variant of shift_operator is in use. (define_special_predicate “mult_operator” (match_code “mult”))

;; True for operators that have 16-bit thumb variants. */ (define_special_predicate “thumb_16bit_operator” (match_code “plus,minus,and,ior,xor”))

;; True for EQ & NE (define_special_predicate “equality_operator” (match_code “eq,ne”))

;; True for integer comparisons and, if FP is active, for comparisons ;; other than LTGT or UNEQ. (define_special_predicate “expandable_comparison_operator” (match_code “eq,ne,le,lt,ge,gt,geu,gtu,leu,ltu, unordered,ordered,unlt,unle,unge,ungt”))

;; Likewise, but only accept comparisons that are directly supported ;; by ARM condition codes. (define_special_predicate “arm_comparison_operator” (and (match_operand 0 “expandable_comparison_operator”) (match_test “maybe_get_arm_condition_code (op) != ARM_NV”)))

;; Likewise, but don‘t ignore the mode. ;; RTL SET operations require their operands source and destination have ;; the same modes, so we can’t ignore the modes there. See PR target/69161. (define_predicate “arm_comparison_operator_mode” (and (match_operand 0 “expandable_comparison_operator”) (match_test “maybe_get_arm_condition_code (op) != ARM_NV”)))

(define_special_predicate “arm_comparison_operation” (match_code “eq,ne,le,lt,ge,gt,geu,gtu,leu,ltu,unordered, ordered,unlt,unle,unge,ungt”) { if (XEXP (op, 1) != const0_rtx) return false; rtx op0 = XEXP (op, 0); if (!REG_P (op0) || REGNO (op0) != CC_REGNUM) return false; return maybe_get_arm_condition_code (op) != ARM_NV; })

(define_special_predicate “lt_ge_comparison_operator” (match_code “lt,ge”))

(define_special_predicate “arm_carry_operation” (match_code “geu,ltu”) { if (XEXP (op, 1) != const0_rtx) return false;

rtx op0 = XEXP (op, 0);

if (!REG_P (op0) || REGNO (op0) != CC_REGNUM)
  return false;

machine_mode ccmode = GET_MODE (op0);
if (ccmode == CC_Cmode)
  return GET_CODE (op) == LTU;
else if (ccmode == CCmode || ccmode == CC_RSBmode || ccmode == CC_ADCmode)
  return GET_CODE (op) == GEU;

return false;

} )

;; Match a “borrow” operation for use with SBC. The precise code will ;; depend on the form of the comparison. This is generally the inverse of ;; a carry operation, since the logic of SBC uses “not borrow” in it's ;; calculation. (define_special_predicate “arm_borrow_operation” (match_code “geu,ltu”) { if (XEXP (op, 1) != const0_rtx) return false; rtx op0 = XEXP (op, 0); if (!REG_P (op0) || REGNO (op0) != CC_REGNUM) return false; machine_mode ccmode = GET_MODE (op0); if (ccmode == CC_Cmode) return GET_CODE (op) == GEU; else if (ccmode == CCmode || ccmode == CC_RSBmode || ccmode == CC_ADCmode) return GET_CODE (op) == LTU; return false; } )

;; The vsel instruction only accepts the ARM condition codes listed below. (define_special_predicate “arm_vsel_comparison_operator” (and (match_operand 0 “expandable_comparison_operator”) (match_test “maybe_get_arm_condition_code (op) == ARM_GE || maybe_get_arm_condition_code (op) == ARM_GT || maybe_get_arm_condition_code (op) == ARM_EQ || maybe_get_arm_condition_code (op) == ARM_VS || maybe_get_arm_condition_code (op) == ARM_LT || maybe_get_arm_condition_code (op) == ARM_LE || maybe_get_arm_condition_code (op) == ARM_NE || maybe_get_arm_condition_code (op) == ARM_VC”)))

(define_special_predicate “arm_cond_move_operator” (if_then_else (match_test “arm_restrict_it”) (and (match_test “TARGET_VFP5”) (match_operand 0 “arm_vsel_comparison_operator”)) (match_operand 0 “expandable_comparison_operator”)))

(define_special_predicate “nz_comparison_operator” (match_code “lt,ge,eq,ne”))

(define_special_predicate “minmax_operator” (and (match_code “smin,smax,umin,umax”) (match_test “mode == GET_MODE (op)”)))

(define_special_predicate “cc_register” (and (match_code “reg”) (and (match_test “REGNO (op) == CC_REGNUM”) (ior (match_test “mode == GET_MODE (op)”) (match_test “mode == VOIDmode && GET_MODE_CLASS (GET_MODE (op)) == MODE_CC”)))))

(define_special_predicate “dominant_cc_register” (match_code “reg”) { if (mode == VOIDmode) { mode = GET_MODE (op);

  if (GET_MODE_CLASS (mode) != MODE_CC)
return false;
}

return (cc_register (op, mode) && (mode == CC_DNEmode || mode == CC_DEQmode || mode == CC_DLEmode || mode == CC_DLTmode || mode == CC_DGEmode || mode == CC_DGTmode || mode == CC_DLEUmode || mode == CC_DLTUmode || mode == CC_DGEUmode || mode == CC_DGTUmode)); })

;; Any register, including CC (define_predicate “cc_register_operand” (and (match_code “reg”) (ior (match_operand 0 “s_register_operand”) (match_operand 0 “cc_register”))))

(define_special_predicate “arm_extendqisi_mem_op” (and (match_operand 0 “memory_operand”) (match_test “TARGET_ARM ? arm_legitimate_address_outer_p (mode, XEXP (op, 0), SIGN_EXTEND, 0) : memory_address_p (QImode, XEXP (op, 0))”)))

(define_special_predicate “arm_reg_or_extendqisi_mem_op” (ior (match_operand 0 “arm_extendqisi_mem_op”) (match_operand 0 “s_register_operand”)))

(define_predicate “power_of_two_operand” (match_code “const_int”) { unsigned HOST_WIDE_INT value = INTVAL (op) & 0xffffffff;

return value != 0 && (value & (value - 1)) == 0; })

(define_predicate “nonimmediate_di_operand” (match_code “reg,subreg,mem”) { if (s_register_operand (op, mode)) return true;

if (GET_CODE (op) == SUBREG) op = SUBREG_REG (op);

return MEM_P (op) && memory_address_p (DImode, XEXP (op, 0)); })

(define_predicate “di_operand” (ior (match_code “const_int,const_double”) (and (match_code “reg,subreg,mem”) (match_operand 0 “nonimmediate_di_operand”))))

(define_predicate “nonimmediate_soft_df_operand” (match_code “reg,subreg,mem”) { if (s_register_operand (op, mode)) return true;

if (GET_CODE (op) == SUBREG) op = SUBREG_REG (op);

return MEM_P (op) && memory_address_p (DFmode, XEXP (op, 0)); })

(define_predicate “soft_df_operand” (ior (match_code “const_double”) (and (match_code “reg,subreg,mem”) (match_operand 0 “nonimmediate_soft_df_operand”))))

;; Predicate for thumb2_movsf_vfp. Compared to general_operand, this ;; forbids constant loaded via literal pool iff literal pools are disabled. (define_predicate “hard_sf_operand” (and (match_operand 0 “general_operand”) (ior (not (match_code “const_double”)) (not (match_test “arm_disable_literal_pool”)) (match_test “satisfies_constraint_Dv (op)”))))

;; Predicate for thumb2_movdf_vfp. Compared to soft_df_operand used in ;; movdf_soft_insn, this forbids constant loaded via literal pool iff ;; literal pools are disabled. (define_predicate “hard_df_operand” (and (match_operand 0 “soft_df_operand”) (ior (not (match_code “const_double”)) (not (match_test “arm_disable_literal_pool”)) (match_test “satisfies_constraint_Dy (op)”) (match_test “satisfies_constraint_G (op)”))))

(define_special_predicate “clear_multiple_operation” (match_code “parallel”) { return clear_operation_p (op, /vfp/false); })

(define_special_predicate “clear_vfp_multiple_operation” (match_code “parallel”) { return clear_operation_p (op, /vfp/true); })

(define_special_predicate “load_multiple_operation” (match_code “parallel”) { return ldm_stm_operation_p (op, /load=/true, SImode, /consecutive=/false, /return_pc=/false); })

(define_special_predicate “store_multiple_operation” (match_code “parallel”) { return ldm_stm_operation_p (op, /load=/false, SImode, /consecutive=/false, /return_pc=/false); })

(define_special_predicate “pop_multiple_return” (match_code “parallel”) { return ldm_stm_operation_p (op, /load=/true, SImode, /consecutive=/false, /return_pc=/true); })

(define_special_predicate “pop_multiple_fp” (match_code “parallel”) { return ldm_stm_operation_p (op, /load=/true, DFmode, /consecutive=/true, /return_pc=/false); })

(define_special_predicate “multi_register_push” (match_code “parallel”) { if ((GET_CODE (XVECEXP (op, 0, 0)) != SET) || (GET_CODE (SET_SRC (XVECEXP (op, 0, 0))) != UNSPEC) || (XINT (SET_SRC (XVECEXP (op, 0, 0)), 1) != UNSPEC_PUSH_MULT)) return false;

return true; })

(define_predicate “push_mult_memory_operand” (match_code “mem”) { /* ??? Given how PUSH_MULT is generated in the prologues, is there any point in testing for thumb1 specially? All of the variants use the same form. / if (TARGET_THUMB1) { / ??? No attempt is made to represent STMIA, or validate that the stack adjustment matches the register count. This is true of the ARM/Thumb2 path as well. */ rtx x = XEXP (op, 0); if (GET_CODE (x) != PRE_MODIFY) return false; if (XEXP (x, 0) != stack_pointer_rtx) return false; x = XEXP (x, 1); if (GET_CODE (x) != PLUS) return false; if (XEXP (x, 0) != stack_pointer_rtx) return false; return CONST_INT_P (XEXP (x, 1)); }

/* ARM and Thumb2 handle pre-modify in their legitimate_address. */ return memory_operand (op, mode); })

;;------------------------------------------------------------------------- ;; ;; Thumb predicates ;;

(define_predicate “thumb1_cmp_operand” (ior (and (match_code “reg,subreg”) (match_operand 0 “s_register_operand”)) (and (match_code “const_int”) (match_test “(UINTVAL (op)) < 256”))))

(define_predicate “thumb1_cmpneg_operand” (and (match_code “const_int”) (match_test “INTVAL (op) < 0 && INTVAL (op) > -256”)))

;; Return TRUE if a result can be stored in OP without clobbering the ;; condition code register. Prior to reload we only accept a ;; register. After reload we have to be able to handle memory as ;; well, since a pseudo may not get a hard reg and reload cannot ;; handle output-reloads on jump insns.

;; We could possibly handle mem before reload as well, but that might ;; complicate things with the need to handle increment ;; side-effects. (define_predicate “thumb_cbrch_target_operand” (and (match_code “reg,subreg,mem”) (ior (match_operand 0 “s_register_operand”) (and (match_test “reload_in_progress || reload_completed”) (match_operand 0 “memory_operand”)))))

;;------------------------------------------------------------------------- ;; ;; iWMMXt predicates ;;

(define_predicate “imm_or_reg_operand” (ior (match_operand 0 “immediate_operand”) (match_operand 0 “register_operand”)))

;; Neon predicates

(define_predicate “const_multiple_of_8_operand” (match_code “const_int”) { unsigned HOST_WIDE_INT val = INTVAL (op); return (val & 7) == 0; })

(define_predicate “imm_for_neon_mov_operand” (match_code “const_vector,const_int”) { return simd_immediate_valid_for_move (op, mode, NULL, NULL); })

(define_predicate “imm_for_neon_lshift_operand” (match_code “const_vector”) { return neon_immediate_valid_for_shift (op, mode, NULL, NULL, true); })

(define_predicate “imm_for_neon_rshift_operand” (match_code “const_vector”) { return neon_immediate_valid_for_shift (op, mode, NULL, NULL, false); })

(define_predicate “imm_lshift_or_reg_neon” (ior (match_operand 0 “s_register_operand”) (match_operand 0 “imm_for_neon_lshift_operand”)))

(define_predicate “imm_rshift_or_reg_neon” (ior (match_operand 0 “s_register_operand”) (match_operand 0 “imm_for_neon_rshift_operand”)))

;; Predicates for named expanders that overlap multiple ISAs.

(define_predicate “cmpdi_operand” (and (match_test “TARGET_32BIT”) (match_operand 0 “arm_di_operand”)))

;; True if the operand is memory reference suitable for a ldrex/strex. (define_predicate “arm_sync_memory_operand” (and (match_operand 0 “memory_operand”) (match_code “reg” “0”)))

;; Predicates for parallel expanders based on mode. (define_special_predicate “vect_par_constant_high” (match_code “parallel”) { return arm_simd_check_vect_par_cnst_half_p (op, mode, true); })

(define_special_predicate “vect_par_constant_low” (match_code “parallel”) { return arm_simd_check_vect_par_cnst_half_p (op, mode, false); })

(define_predicate “const_double_vcvt_power_of_two_reciprocal” (and (match_code “const_double”) (match_test “TARGET_32BIT && vfp3_const_double_for_fract_bits (op)”)))

(define_predicate “const_double_vcvt_power_of_two” (and (match_code “const_double”) (match_test “TARGET_32BIT && vfp3_const_double_for_bits (op) > 0”)))

(define_predicate “neon_struct_operand” (and (match_code “mem”) (match_test “TARGET_32BIT && neon_vector_mem_operand (op, 2, true)”)))

(define_predicate “neon_permissive_struct_operand” (and (match_code “mem”) (match_test “TARGET_32BIT && neon_vector_mem_operand (op, 2, false)”)))

(define_predicate “neon_perm_struct_or_reg_operand” (ior (match_operand 0 “neon_permissive_struct_operand”) (match_operand 0 “s_register_operand”)))

(define_special_predicate “add_operator” (match_code “plus”))

(define_predicate “mem_noofs_operand” (and (match_code “mem”) (match_code “reg” “0”)))

(define_predicate “call_insn_operand” (ior (and (match_code “symbol_ref”) (match_test “!arm_is_long_call_p (SYMBOL_REF_DECL (op))”)) (match_operand 0 “s_register_operand”)))

(define_special_predicate “aligned_operand” (ior (not (match_code “mem”)) (match_test “MEM_ALIGN (op) >= GET_MODE_ALIGNMENT (mode)”)))