blob: 312c41100d5e7396063014f5875cedf4eed2b7bd [file] [log] [blame]
------------------------------------------------------------------------------
-- --
-- GNAT COMPILER COMPONENTS --
-- --
-- P A R --
-- --
-- B o d y --
-- --
-- Copyright (C) 1992-2021, Free Software Foundation, Inc. --
-- --
-- GNAT is free software; you can redistribute it and/or modify it under --
-- terms of the GNU General Public License as published by the Free Soft- --
-- ware Foundation; either version 3, or (at your option) any later ver- --
-- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
-- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
-- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
-- for more details. You should have received a copy of the GNU General --
-- Public License distributed with GNAT; see file COPYING3. If not, go to --
-- http://www.gnu.org/licenses for a complete copy of the license. --
-- --
-- GNAT was originally developed by the GNAT team at New York University. --
-- Extensive contributions were provided by Ada Core Technologies Inc. --
-- --
------------------------------------------------------------------------------
with Aspects; use Aspects;
with Atree; use Atree;
with Casing; use Casing;
with Debug; use Debug;
with Elists; use Elists;
with Errout; use Errout;
with Fname; use Fname;
with Lib; use Lib;
with Namet; use Namet;
with Namet.Sp; use Namet.Sp;
with Nlists; use Nlists;
with Nmake; use Nmake;
with Opt; use Opt;
with Output; use Output;
with Par_SCO; use Par_SCO;
with Restrict; use Restrict;
with Scans; use Scans;
with Scn; use Scn;
with Sem_Util; use Sem_Util;
with Sinput; use Sinput;
with Sinput.L; use Sinput.L;
with Sinfo; use Sinfo;
with Sinfo.Nodes; use Sinfo.Nodes;
with Sinfo.Utils; use Sinfo.Utils;
with Snames; use Snames;
with Style;
with Stylesw; use Stylesw;
with Table;
with Tbuild; use Tbuild;
---------
-- Par --
---------
function Par (Configuration_Pragmas : Boolean) return List_Id is
Inside_Record_Definition : Boolean := False;
-- True within a record definition. Used to control warning for
-- redefinition of standard entities (not issued for field names).
Loop_Block_Count : Nat := 0;
-- Counter used for constructing loop/block names (see the routine
-- Par.Ch5.Get_Loop_Block_Name).
Num_Library_Units : Natural := 0;
-- Count number of units parsed (relevant only in syntax check only mode,
-- since in semantics check mode only a single unit is permitted anyway).
Save_Config_Attrs : Config_Switches_Type;
-- Variable used to save values of config switches while we parse the
-- new unit, to be restored on exit for proper recursive behavior.
--------------------
-- Error Recovery --
--------------------
-- When an error is encountered, a call is made to one of the Error_Msg
-- routines to record the error. If the syntax scan is not derailed by the
-- error (e.g. a complaint that logical operators are inconsistent in an
-- EXPRESSION), then control returns from the Error_Msg call, and the
-- parse continues unimpeded.
-- If on the other hand, the Error_Msg represents a situation from which
-- the parser cannot recover locally, the exception Error_Resync is raised
-- immediately after the call to Error_Msg. Handlers for Error_Resync
-- are located at strategic points to resynchronize the parse. For example,
-- when an error occurs in a statement, the handler skips to the next
-- semicolon and continues the scan from there.
-- Each parsing procedure contains a note with the heading "Error recovery"
-- which shows if it can propagate the Error_Resync exception. In order
-- not to propagate the exception, a procedure must either contain its own
-- handler for this exception, or it must not call any other routines which
-- propagate the exception.
-- Note: the arrangement of Error_Resync handlers is such that it should
-- never be possible to transfer control through a procedure which made
-- an entry in the scope stack, invalidating the contents of the stack.
Error_Resync : exception;
-- Exception raised on error that is not handled locally, see above
Last_Resync_Point : Source_Ptr;
-- The resynchronization routines in Par.Sync run a risk of getting
-- stuck in an infinite loop if they do not skip a token, and the caller
-- keeps repeating the same resync call. On the other hand, if they skip
-- a token unconditionally, some recovery opportunities are missed. The
-- variable Last_Resync_Point records the token location previously set
-- by a Resync call, and if a subsequent Resync call occurs at the same
-- location, then the Resync routine does guarantee to skip a token.
--------------------------------------------
-- Handling Semicolon Used in Place of IS --
--------------------------------------------
-- The following global variables are used in handling the error situation
-- of using a semicolon in place of IS in a subprogram declaration as in:
-- procedure X (Y : Integer);
-- Q : Integer;
-- begin
-- ...
-- end;
-- The two contexts in which this can appear are at the outer level, and
-- within a declarative region. At the outer level, we know something is
-- wrong as soon as we see the Q (or begin, if there are no declarations),
-- and we can immediately decide that the semicolon should have been IS.
-- The situation in a declarative region is more complex. The declaration
-- of Q could belong to the outer region, and we do not know that we have
-- an error until we hit the begin. It is still not clear at this point
-- from a syntactic point of view that something is wrong, because the
-- begin could belong to the enclosing subprogram or package. However, we
-- can incorporate a bit of semantic knowledge and note that the body of
-- X is missing, so we definitely DO have an error. We diagnose this error
-- as semicolon in place of IS on the subprogram line.
-- There are two styles for this diagnostic. If the begin immediately
-- follows the semicolon, then we can place a flag (IS expected) right
-- on the semicolon. Otherwise we do not detect the error until we hit
-- the begin which refers back to the line with the semicolon.
-- To control the process in the second case, the following global
-- variables are set to indicate that we have a subprogram declaration
-- whose body is required and has not yet been found. The prefix SIS
-- stands for "Subprogram IS" handling.
SIS_Entry_Active : Boolean := False;
-- Set True to indicate that an entry is active (i.e. that a subprogram
-- declaration has been encountered, and no body for this subprogram
-- has been encountered). The remaining variables other than
-- SIS_Aspect_Import_Seen are valid only if this is True.
SIS_Aspect_Import_Seen : Boolean := False;
-- If this is True when a subprogram declaration has been encountered, we
-- do not set SIS_Entry_Active, because the Import means there is no body.
-- Set False at the start of P_Subprogram, set True when an Import aspect
-- specification is seen, and used when P_Subprogram finds a subprogram
-- declaration. This is necessary because the aspects are parsed before
-- we know we have a subprogram declaration.
SIS_Labl : Node_Id;
-- Subprogram designator
SIS_Sloc : Source_Ptr;
-- Source location of FUNCTION/PROCEDURE keyword
SIS_Ecol : Column_Number;
-- Column number of FUNCTION/PROCEDURE keyword
SIS_Semicolon_Sloc : Source_Ptr;
-- Source location of semicolon at end of subprogram declaration
SIS_Declaration_Node : Node_Id;
-- Pointer to tree node for subprogram declaration
SIS_Missing_Semicolon_Message : Error_Msg_Id;
-- Used to save message ID of missing semicolon message (which will be
-- modified to missing IS if necessary). Set to No_Error_Msg in the
-- normal (non-error) case.
-- Five things can happen to an active SIS entry
-- 1. If a BEGIN is encountered with an SIS entry active, then we have
-- exactly the situation in which we know the body of the subprogram is
-- missing. After posting an error message, we change the spec to a body,
-- rechaining the declarations that intervened between the spec and BEGIN.
-- 2. Another subprogram declaration or body is encountered. In this
-- case the entry gets overwritten with the information for the new
-- subprogram declaration. We don't catch some nested cases this way,
-- but it doesn't seem worth the effort.
-- 3. A nested declarative region (e.g. package declaration or package
-- body) is encountered. The SIS active indication is reset at the start
-- of such a nested region. Again, like case 2, this causes us to miss
-- some nested cases, but it doesn't seen worth the effort to stack and
-- unstack the SIS information. Maybe we will reconsider this if we ever
-- get a complaint about a missed case.
-- 4. We encounter a valid pragma INTERFACE or IMPORT that effectively
-- supplies the missing body. In this case we reset the entry.
-- 5. We encounter the end of the declarative region without encountering
-- a BEGIN first. In this situation we simply reset the entry. We know
-- that there is a missing body, but it seems more reasonable to let the
-- later semantic checking discover this.
----------------------------------------------------
-- Handling of Reserved Words Used as Identifiers --
----------------------------------------------------
-- Note: throughout the parser, the terms reserved word and keyword are
-- used interchangeably to refer to the same set of reserved keywords
-- (including until, protected, etc).
-- If a reserved word is used in place of an identifier, the parser where
-- possible tries to recover gracefully. In particular, if the keyword is
-- clearly spelled using identifier casing, e.g. Until in a source program
-- using mixed case identifiers and lower case keywords, then the keyword
-- is treated as an identifier if it appears in a place where an identifier
-- is required.
-- The situation is more complex if the keyword is spelled with normal
-- keyword casing. In this case, the parser is more reluctant to consider
-- it to be intended as an identifier, unless it has some further
-- confirmation.
-- In the case of an identifier appearing in the identifier list of a
-- declaration, the appearance of a comma or colon right after the keyword
-- on the same line is taken as confirmation. For an enumeration literal,
-- a comma or right paren right after the identifier is also treated as
-- adequate confirmation.
-- The following type is used in calls to Is_Reserved_Identifier and
-- also to P_Defining_Identifier and P_Identifier. The default for all
-- these functions is that reserved words in reserved word case are not
-- considered to be reserved identifiers. The Id_Check value indicates
-- tokens, which if they appear immediately after the identifier, are
-- taken as confirming that the use of an identifier was expected
type Id_Check is
(None,
-- Default, no special token test
C_Comma_Right_Paren,
-- Consider as identifier if followed by comma or right paren
C_Comma_Colon,
-- Consider as identifier if followed by comma or colon
C_Do,
-- Consider as identifier if followed by DO
C_Dot,
-- Consider as identifier if followed by period
C_Greater_Greater,
-- Consider as identifier if followed by >>
C_In,
-- Consider as identifier if followed by IN
C_Is,
-- Consider as identifier if followed by IS
C_Left_Paren_Semicolon,
-- Consider as identifier if followed by left paren or semicolon
C_Use,
-- Consider as identifier if followed by USE
C_Vertical_Bar_Arrow);
-- Consider as identifier if followed by | or =>
--------------------------------------------
-- Handling IS Used in Place of Semicolon --
--------------------------------------------
-- This is a somewhat trickier situation, and we can't catch it in all
-- cases, but we do our best to detect common situations resulting from
-- a "cut and paste" operation which forgets to change the IS to semicolon.
-- Consider the following example:
-- package body X is
-- procedure A;
-- procedure B is
-- procedure C;
-- ...
-- procedure D is
-- begin
-- ...
-- end;
-- begin
-- ...
-- end;
-- The trouble is that the section of text from PROCEDURE B through END;
-- constitutes a valid procedure body, and the danger is that we find out
-- far too late that something is wrong (indeed most compilers will behave
-- uncomfortably on the above example).
-- We have two approaches to helping to control this situation. First we
-- make every attempt to avoid swallowing the last END; if we can be sure
-- that some error will result from doing so. In particular, we won't
-- accept the END; unless it is exactly correct (in particular it must not
-- have incorrect name tokens), and we won't accept it if it is immediately
-- followed by end of file, WITH or SEPARATE (all tokens that unmistakeably
-- signal the start of a compilation unit, and which therefore allow us to
-- reserve the END; for the outer level.) For more details on this aspect
-- of the handling, see package Par.Endh.
-- If we can avoid eating up the END; then the result in the absence of
-- any additional steps would be to post a missing END referring back to
-- the subprogram with the bogus IS. Similarly, if the enclosing package
-- has no BEGIN, then the result is a missing BEGIN message, which again
-- refers back to the subprogram header.
-- Such an error message is not too bad (it's already a big improvement
-- over what many parsers do), but it's not ideal, because the declarations
-- following the IS have been absorbed into the wrong scope. In the above
-- case, this could result for example in a bogus complaint that the body
-- of D was missing from the package.
-- To catch at least some of these cases, we take the following additional
-- steps. First, a subprogram body is marked as having a suspicious IS if
-- the declaration line is followed by a line which starts with a symbol
-- that can start a declaration in the same column, or to the left of the
-- column in which the FUNCTION or PROCEDURE starts (normal style is to
-- indent any declarations which really belong a subprogram). If such a
-- subprogram encounters a missing BEGIN or missing END, then we decide
-- that the IS should have been a semicolon, and the subprogram body node
-- is marked (by setting the Bad_Is_Detected flag true. Note that we do
-- not do this for library level procedures, only for nested procedures,
-- since for library level procedures, we must have a body.
-- The processing for a declarative part checks to see if the last
-- declaration scanned is marked in this way, and if it is, the tree
-- is modified to reflect the IS being interpreted as a semicolon.
---------------------------------------------------
-- Parser Type Definitions and Control Variables --
---------------------------------------------------
-- The following variable and associated type declaration are used by the
-- expression parsing routines to return more detailed information about
-- the categorization of a parsed expression.
type Expr_Form_Type is (
EF_Simple_Name, -- Simple name, i.e. possibly qualified identifier
EF_Name, -- Simple expression which could also be a name
EF_Simple, -- Simple expression which is not call or name
EF_Range_Attr, -- Range attribute reference
EF_Non_Simple); -- Expression that is not a simple expression
Expr_Form : Expr_Form_Type;
-- The following type is used for calls to P_Subprogram, P_Package, P_Task,
-- P_Protected to indicate which of several possibilities is acceptable.
type Pf_Rec is record
Spcn : Boolean; -- True if specification OK
Decl : Boolean; -- True if declaration OK
Gins : Boolean; -- True if generic instantiation OK
Pbod : Boolean; -- True if proper body OK
Rnam : Boolean; -- True if renaming declaration OK
Stub : Boolean; -- True if body stub OK
Pexp : Boolean; -- True if parameterized expression OK
Fil2 : Boolean; -- Filler to fill to 8 bits
end record;
pragma Pack (Pf_Rec);
function T return Boolean renames True;
function F return Boolean renames False;
Pf_Decl_Gins_Pbod_Rnam_Stub_Pexp : constant Pf_Rec :=
Pf_Rec'(F, T, T, T, T, T, T, F);
Pf_Decl_Pexp : constant Pf_Rec :=
Pf_Rec'(F, T, F, F, F, F, T, F);
Pf_Decl_Gins_Pbod_Rnam_Pexp : constant Pf_Rec :=
Pf_Rec'(F, T, T, T, T, F, T, F);
Pf_Decl_Pbod_Pexp : constant Pf_Rec :=
Pf_Rec'(F, T, F, T, F, F, T, F);
Pf_Pbod_Pexp : constant Pf_Rec :=
Pf_Rec'(F, F, F, T, F, F, T, F);
Pf_Spcn : constant Pf_Rec :=
Pf_Rec'(T, F, F, F, F, F, F, F);
-- The above are the only allowed values of Pf_Rec arguments
type SS_Rec is record
Eftm : Boolean; -- ELSIF can terminate sequence
Eltm : Boolean; -- ELSE can terminate sequence
Extm : Boolean; -- EXCEPTION can terminate sequence
Ortm : Boolean; -- OR can terminate sequence
Sreq : Boolean; -- at least one statement required
Tatm : Boolean; -- THEN ABORT can terminate sequence
Whtm : Boolean; -- WHEN can terminate sequence
Unco : Boolean; -- Unconditional terminate after one statement
end record;
pragma Pack (SS_Rec);
SS_Eftm_Eltm_Sreq : constant SS_Rec := SS_Rec'(T, T, F, F, T, F, F, F);
SS_Eltm_Ortm_Tatm : constant SS_Rec := SS_Rec'(F, T, F, T, F, T, F, F);
SS_Extm_Sreq : constant SS_Rec := SS_Rec'(F, F, T, F, T, F, F, F);
SS_None : constant SS_Rec := SS_Rec'(F, F, F, F, F, F, F, F);
SS_Ortm_Sreq : constant SS_Rec := SS_Rec'(F, F, F, T, T, F, F, F);
SS_Sreq : constant SS_Rec := SS_Rec'(F, F, F, F, T, F, F, F);
SS_Sreq_Whtm : constant SS_Rec := SS_Rec'(F, F, F, F, T, F, T, F);
SS_Whtm : constant SS_Rec := SS_Rec'(F, F, F, F, F, F, T, F);
SS_Unco : constant SS_Rec := SS_Rec'(F, F, F, F, F, F, F, T);
Goto_List : Elist_Id;
-- List of goto nodes appearing in the current compilation. Used to
-- recognize natural loops and convert them into bona fide loops for
-- optimization purposes.
Label_List : Elist_Id;
-- List of label nodes for labels appearing in the current compilation.
-- Used by Par.Labl to construct the corresponding implicit declarations.
-----------------
-- Scope Table --
-----------------
-- The scope table, also referred to as the scope stack, is used to record
-- the current scope context. It is organized as a stack, with inner nested
-- entries corresponding to higher entries on the stack. An entry is made
-- when the parser encounters the opening of a nested construct (such as a
-- record, task, package etc.), and then package Par.Endh uses this stack
-- to deal with END lines (including properly dealing with END nesting
-- errors).
type SS_End_Type is
-- Type of end entry required for this scope. The last two entries are
-- used only in the subprogram body case to mark the case of a suspicious
-- IS, or a bad IS (i.e. suspicions confirmed by missing BEGIN or END).
-- See separate section on dealing with IS used in place of semicolon.
-- Note that for many purposes E_Name, E_Suspicious_Is and E_Bad_Is are
-- treated the same (E_Suspicious_Is and E_Bad_Is are simply special cases
-- of E_Name). They are placed at the end of the enumeration so that a
-- test for >= E_Name catches all three cases efficiently.
(E_Dummy, -- dummy entry at outer level
E_Case, -- END CASE;
E_If, -- END IF;
E_Loop, -- END LOOP;
E_Record, -- END RECORD;
E_Return, -- END RETURN;
E_Select, -- END SELECT;
E_Name, -- END [name];
E_Suspicious_Is, -- END [name]; (case of suspicious IS)
E_Bad_Is); -- END [name]; (case of bad IS)
-- The following describes a single entry in the scope table
type Scope_Table_Entry is record
Etyp : SS_End_Type;
-- Type of end entry, as per above description
Lreq : Boolean;
-- A flag indicating whether the label, if present, is required to
-- appear on the end line. It is referenced only in the case of Etyp is
-- equal to E_Name or E_Suspicious_Is where the name may or may not be
-- required (yes for labeled block, no in other cases). Note that for
-- all cases except begin, the question of whether a label is required
-- can be determined from the other fields (for loop, it is required if
-- it is present, and for the other constructs it is never required or
-- allowed).
Ecol : Column_Number;
-- Contains the absolute column number (with tabs expanded) of the
-- expected column of the end assuming normal Ada indentation usage. If
-- the RM_Column_Check mode is set, this value is used for generating
-- error messages about indentation. Otherwise it is used only to
-- control heuristic error recovery actions. This value is zero origin.
Labl : Node_Id;
-- This field is used to provide the name of the construct being parsed
-- and indirectly its kind. For loops and blocks, the field contains the
-- source name or the generated one. For package specifications, bodies,
-- subprogram specifications and bodies the field holds the correponding
-- program unit name. For task declarations and bodies, protected types
-- and bodies, and accept statements the field hold the name of the type
-- or operation. For if-statements, case-statements, return statements,
-- and selects, the field is initialized to Error.
-- Note: this is a bit of an odd (mis)use of Error, since there is no
-- Error, but we use this value as a place holder to indicate that it
-- is an error to have a label on the end line.
-- Whenever the field is a name, it is attached to the parent node of
-- the construct being parsed. Thus the parent node indicates the kind
-- of construct whose parse tree is being built. This is used in error
-- recovery.
Decl : List_Id;
-- Points to the list of declarations (i.e. the declarative part)
-- associated with this construct. It is set only in the END [name]
-- cases, and is set to No_List for all other cases which do not have a
-- declarative unit associated with them. This is used for determining
-- the proper location for implicit label declarations.
Node : Node_Id;
-- Empty except in the case of entries for IF and CASE statements, in
-- which case it contains the N_If_Statement or N_Case_Statement node.
-- This is used for setting the End_Span field.
Sloc : Source_Ptr;
-- Source location of the opening token of the construct. This is used
-- to refer back to this line in error messages (such as missing or
-- incorrect end lines). The Sloc field is not used, and is not set, if
-- a label is present (the Labl field provides the text name of the
-- label in this case, which is fine for error messages).
S_Is : Source_Ptr;
-- S_Is is relevant only if Etyp is set to E_Suspicious_Is or E_Bad_Is.
-- It records the location of the IS that is considered to be
-- suspicious.
Junk : Boolean;
-- A boolean flag that is set true if the opening entry is the dubious
-- result of some prior error, e.g. a record entry where the record
-- keyword was missing. It is used to suppress the issuing of a
-- corresponding junk complaint about the end line (we do not want
-- to complain about a missing end record when there was no record).
end record;
-- The following declares the scope table itself. The Last field is the
-- stack pointer, so that Scope.Table (Scope.Last) is the top entry. The
-- oldest entry, at Scope_Stack (0), is a dummy entry with Etyp set to
-- E_Dummy, and the other fields undefined. This dummy entry ensures that
-- Scope_Stack (Scope_Stack_Ptr).Etyp can always be tested, and that the
-- scope stack pointer is always in range.
package Scope is new Table.Table (
Table_Component_Type => Scope_Table_Entry,
Table_Index_Type => Int,
Table_Low_Bound => 0,
Table_Initial => 50,
Table_Increment => 100,
Table_Name => "Scope");
type Scope_Table_Entry_Ptr is access all Scope_Table_Entry;
function Scopes (Index : Int) return Scope_Table_Entry_Ptr;
-- Return the indicated Scope_Table_Entry. We use a pointer for
-- efficiency. Callers should not save the pointer, but should do things
-- like Scopes (Scope.Last).Something. Note that there is one place in
-- Par.Ch5 that indexes the stack out of bounds, and can't call this.
function Scopes (Index : Int) return Scope_Table_Entry_Ptr is
begin
pragma Assert (Index in Scope.First .. Scope.Last);
return Scope.Table (Index)'Unrestricted_Access;
end Scopes;
------------------------------------------
-- Table for Handling Suspicious Labels --
------------------------------------------
-- This is a special data structure which is used to deal very spefifically
-- with the following error case
-- label;
-- loop
-- ...
-- end loop label;
-- Similar cases apply to FOR, WHILE, DECLARE, or BEGIN
-- In each case the opening line looks like a procedure call because of
-- the semicolon. And the end line looks illegal because of an unexpected
-- label. If we did nothing special, we would just diagnose the label on
-- the end as unexpected. But that does not help point to the real error
-- which is that the semicolon after label should be a colon.
-- To deal with this, we build an entry in the Suspicious_Labels table
-- whenever we encounter an identifier followed by a semicolon, followed
-- by one of LOOP, FOR, WHILE, DECLARE, BEGIN. Then this entry is used to
-- issue the right message when we hit the END that confirms that this was
-- a bad label.
type Suspicious_Label_Entry is record
Proc_Call : Node_Id;
-- Node for the procedure call statement built for the label; construct
Semicolon_Loc : Source_Ptr;
-- Location of the possibly wrong semicolon
Start_Token : Source_Ptr;
-- Source location of the LOOP, FOR, WHILE, DECLARE, BEGIN token
end record;
package Suspicious_Labels is new Table.Table (
Table_Component_Type => Suspicious_Label_Entry,
Table_Index_Type => Int,
Table_Low_Bound => 1,
Table_Initial => 50,
Table_Increment => 100,
Table_Name => "Suspicious_Labels");
-- Now when we are about to issue a message complaining about an END label
-- that should not be there because it appears to end a construct that has
-- no label, we first search the suspicious labels table entry, using the
-- source location stored in the scope table as a key. If we find a match,
-- then we check that the label on the end matches the name in the call,
-- and if so, we issue a message saying the semicolon should be a colon.
-- Quite a bit of work, but really helpful in the case where it helps, and
-- the need for this is based on actual experience with tracking down this
-- kind of error (the eye often easily mistakes semicolon for colon).
-- Note: we actually have enough information to patch up the tree, but
-- this may not be worth the effort. Also we could deal with the same
-- situation for EXIT with a label, but for now don't bother with that.
Current_Assign_Node : Node_Id := Empty;
-- This is the node of the current assignment statement being compiled.
-- It is used to record the presence of target_names on its RHS. This
-- context-dependent trick simplifies the analysis of such nodes, where
-- the RHS must first be analyzed with expansion disabled.
---------------------------------
-- Parsing Routines by Chapter --
---------------------------------
-- Uncommented declarations in this section simply parse the construct
-- corresponding to their name, and return an ID value for the Node or
-- List that is created.
-------------
-- Par.Ch2 --
-------------
package Ch2 is
function P_Pragma (Skipping : Boolean := False) return Node_Id;
-- Scan out a pragma. If Skipping is True, then the caller is skipping
-- the pragma in the context of illegal placement (this is used to avoid
-- some junk cascaded messages). Some pragmas must be dealt with during
-- the parsing phase (e.g. pragma Page, since we can generate a listing
-- in syntax only mode). It is possible that the parser uses the rescan
-- logic (using Save/Restore_Scan_State) with the effect of calling this
-- procedure more than once for the same pragma. All parse-time pragma
-- handling must be prepared to handle such multiple calls correctly.
function P_Identifier (C : Id_Check := None) return Node_Id;
-- Scans out an identifier. The parameter C determines the treatment
-- of reserved identifiers. See declaration of Id_Check for details.
function P_Pragmas_Opt return List_Id;
-- This function scans for a sequence of pragmas in other than a
-- declaration sequence or statement sequence context. All pragmas
-- can appear except pragmas Assert and Debug, which are only allowed
-- in a declaration or statement sequence context.
procedure P_Pragmas_Misplaced;
-- Skips misplaced pragmas with a complaint
procedure P_Pragmas_Opt (List : List_Id);
-- Parses optional pragmas and appends them to the List
end Ch2;
-------------
-- Par.Ch3 --
-------------
package Ch3 is
Missing_Begin_Msg : Error_Msg_Id;
-- This variable is set by a call to P_Declarative_Part. Normally it
-- is set to No_Error_Msg, indicating that no special processing is
-- required by the caller. The special case arises when a statement
-- is found in the sequence of declarations. In this case the Id of
-- the message issued ("declaration expected") is preserved in this
-- variable, then the caller can change it to an appropriate missing
-- begin message if indeed the BEGIN is missing.
function P_Array_Type_Definition return Node_Id;
function P_Constraint_Opt return Node_Id;
function P_Declarative_Part return List_Id;
function P_Discrete_Choice_List return List_Id;
function P_Discrete_Range return Node_Id;
function P_Discrete_Subtype_Definition return Node_Id;
function P_Known_Discriminant_Part_Opt return List_Id;
function P_Signed_Integer_Type_Definition return Node_Id;
function P_Range return Node_Id;
function P_Range_Constraint return Node_Id;
function P_Record_Definition return Node_Id;
function P_Subtype_Mark return Node_Id;
function P_Subtype_Mark_Resync return Node_Id;
function P_Unknown_Discriminant_Part_Opt return Boolean;
function P_Basic_Declarative_Items
(Declare_Expression : Boolean) return List_Id;
-- Used to parse the declarative items in a package visible or
-- private part (in which case Declare_Expression is False), and
-- the declare_items of a declare_expression (in which case
-- Declare_Expression is True). Declare_Expression is used to
-- affect the wording of error messages, and to control style
-- checking.
function P_Access_Definition
(Null_Exclusion_Present : Boolean) return Node_Id;
-- Ada 2005 (AI-231/AI-254): The caller parses the null-exclusion part
-- and indicates if it was present
function P_Access_Type_Definition
(Header_Already_Parsed : Boolean := False) return Node_Id;
-- Ada 2005 (AI-254): The formal is used to indicate if the caller has
-- parsed the null_exclusion part. In this case the caller has also
-- removed the ACCESS token
procedure P_Component_Items (Decls : List_Id);
-- Scan out one or more component items and append them to the given
-- list. Only scans out more than one declaration in the case where the
-- source has a single declaration with multiple defining identifiers.
function P_Defining_Identifier (C : Id_Check := None) return Node_Id;
-- Scan out a defining identifier. The parameter C controls the
-- treatment of errors in case a reserved word is scanned. See the
-- declaration of this type for details.
function P_Interface_Type_Definition
(Abstract_Present : Boolean) return Node_Id;
-- Ada 2005 (AI-251): Parse the interface type definition part. Abstract
-- Present indicates if the reserved word "abstract" has been previously
-- found. It is used to report an error message because interface types
-- are by definition abstract tagged. We generate a record_definition
-- node if the list of interfaces is empty; otherwise we generate a
-- derived_type_definition node (the first interface in this list is the
-- ancestor interface).
function P_Null_Exclusion
(Allow_Anonymous_In_95 : Boolean := False) return Boolean;
-- Ada 2005 (AI-231): Parse the null-excluding part. A True result
-- indicates that the null-excluding part was present.
--
-- Allow_Anonymous_In_95 is True if we are in a context that allows
-- anonymous access types in Ada 95, in which case "not null" is legal
-- if it precedes "access".
function P_Subtype_Indication
(Not_Null_Present : Boolean := False) return Node_Id;
-- Ada 2005 (AI-231): The flag Not_Null_Present indicates that the
-- null-excluding part has been scanned out and it was present.
function P_Range_Or_Subtype_Mark
(Allow_Simple_Expression : Boolean := False) return Node_Id;
-- Scans out a range or subtype mark, and also permits a general simple
-- expression if Allow_Simple_Expression is set to True.
function Init_Expr_Opt (P : Boolean := False) return Node_Id;
-- If an initialization expression is present (:= expression), then
-- it is scanned out and returned, otherwise Empty is returned if no
-- initialization expression is present. This procedure also handles
-- certain common error cases cleanly. The parameter P indicates if
-- a right paren can follow the expression (default = no right paren
-- allowed).
procedure Skip_Declaration (S : List_Id);
-- Used when scanning statements to skip past a misplaced declaration
-- The declaration is scanned out and appended to the given list.
-- Token is known to be a declaration token (in Token_Class_Declk)
-- on entry, so there definition is a declaration to be scanned.
function P_Subtype_Indication
(Subtype_Mark : Node_Id;
Not_Null_Present : Boolean := False) return Node_Id;
-- This version of P_Subtype_Indication is called when the caller has
-- already scanned out the subtype mark which is passed as a parameter.
-- Ada 2005 (AI-231): The flag Not_Null_Present indicates that the
-- null-excluding part has been scanned out and it was present.
function P_Subtype_Mark_Attribute (Type_Node : Node_Id) return Node_Id;
-- Parse a subtype mark attribute. The caller has already parsed the
-- subtype mark, which is passed in as the argument, and has checked
-- that the current token is apostrophe.
end Ch3;
-------------
-- Par.Ch4 --
-------------
package Ch4 is
function P_Aggregate return Node_Id;
function P_Expression return Node_Id;
function P_Expression_Or_Range_Attribute return Node_Id;
function P_Function_Name return Node_Id;
function P_Name return Node_Id;
function P_Qualified_Simple_Name return Node_Id;
function P_Qualified_Simple_Name_Resync return Node_Id;
function P_Simple_Expression return Node_Id;
function P_Simple_Expression_Or_Range_Attribute return Node_Id;
function P_Expression_If_OK return Node_Id;
-- Scans out an expression allowing an unparenthesized case expression,
-- if expression, or quantified expression to appear without enclosing
-- parentheses. However, if such an expression is not preceded by a left
-- paren, and followed by a right paren, an error message will be output
-- noting that parenthesization is required.
function P_Expression_No_Right_Paren return Node_Id;
-- Scans out an expression in contexts where the expression cannot be
-- terminated by a right paren (gives better error recovery if an errant
-- right paren is found after the expression).
function P_Expression_Or_Range_Attribute_If_OK return Node_Id;
-- Scans out an expression or range attribute where a conditional
-- expression is permitted to appear without surrounding parentheses.
-- However, if such an expression is not preceded by a left paren, and
-- followed by a right paren, an error message will be output noting
-- that parenthesization is required.
function P_If_Expression return Node_Id;
-- Scans out an if expression. Called with Token pointing to the
-- IF keyword, and returns pointing to the terminating right paren,
-- semicolon or comma, but does not consume this terminating token.
function P_Qualified_Expression (Subtype_Mark : Node_Id) return Node_Id;
-- This routine scans out a qualified expression when the caller has
-- already scanned out the name and apostrophe of the construct.
function P_Quantified_Expression return Node_Id;
-- This routine scans out a quantified expression when the caller has
-- already scanned out the keyword "for" of the construct.
end Ch4;
-------------
-- Par.Ch5 --
-------------
package Ch5 is
function P_Condition return Node_Id;
-- Scan out and return a condition. Note that an error is given if
-- the condition is followed by a right parenthesis.
function P_Condition (Cond : Node_Id) return Node_Id;
-- Similar to the above, but the caller has already scanned out the
-- conditional expression and passes it as an argument. This form of
-- the call does not check for a following right parenthesis.
function P_Iterator_Specification (Def_Id : Node_Id) return Node_Id;
-- Parse an iterator specification. The defining identifier has already
-- been scanned, as it is the common prefix between loop and iterator
-- specification.
function P_Loop_Parameter_Specification return Node_Id;
-- Used in loop constructs and quantified expressions.
function P_Sequence_Of_Statements (SS_Flags : SS_Rec) return List_Id;
-- The argument indicates the acceptable termination tokens.
-- See body in Par.Ch5 for details of the use of this parameter.
procedure Parse_Decls_Begin_End (Parent : Node_Id);
-- Parses declarations and handled statement sequence, setting
-- fields of Parent node appropriately.
end Ch5;
-------------
-- Par.Ch6 --
-------------
package Ch6 is
function P_Designator return Node_Id;
function P_Defining_Program_Unit_Name return Node_Id;
function P_Formal_Part return List_Id;
function P_Parameter_Profile return List_Id;
function P_Return_Statement return Node_Id;
function P_Subprogram_Specification return Node_Id;
procedure P_Mode (Node : Node_Id);
-- Sets In_Present and/or Out_Present flags in Node scanning past IN,
-- OUT or IN OUT tokens in the source.
function P_Subprogram (Pf_Flags : Pf_Rec) return Node_Id;
-- Scans out any construct starting with either of the keywords
-- PROCEDURE or FUNCTION. The parameter indicates which possible
-- possible kinds of construct (body, spec, instantiation etc.)
-- are permissible in the current context.
end Ch6;
-------------
-- Par.Ch7 --
-------------
package Ch7 is
function P_Package (Pf_Flags : Pf_Rec) return Node_Id;
-- Scans out any construct starting with the keyword PACKAGE. The
-- parameter indicates which possible kinds of construct (body, spec,
-- instantiation etc.) are permissible in the current context.
end Ch7;
-------------
-- Par.Ch8 --
-------------
package Ch8 is
procedure P_Use_Clause (Item_List : List_Id);
end Ch8;
-------------
-- Par.Ch9 --
-------------
package Ch9 is
function P_Abort_Statement return Node_Id;
function P_Abortable_Part return Node_Id;
function P_Accept_Statement return Node_Id;
function P_Delay_Statement return Node_Id;
function P_Entry_Body return Node_Id;
function P_Protected return Node_Id;
function P_Requeue_Statement return Node_Id;
function P_Select_Statement return Node_Id;
function P_Task return Node_Id;
function P_Terminate_Alternative return Node_Id;
end Ch9;
--------------
-- Par.Ch10 --
--------------
package Ch10 is
function P_Compilation_Unit return Node_Id;
-- Note: this function scans a single compilation unit, and checks that
-- an end of file follows this unit, diagnosing any unexpected input as
-- an error, and then skipping it, so that Token is set to Tok_EOF on
-- return. An exception is in syntax-only mode, where multiple
-- compilation units are permitted. In this case, P_Compilation_Unit
-- does not check for end of file and there may be more compilation
-- units to scan. The caller can uniquely detect this situation by the
-- fact that Token is not set to Tok_EOF on return.
--
-- What about multiple unit/file capability that now exists???
--
-- The Ignore parameter is normally set False. It is set True in the
-- multiple unit per file mode if we are skipping past a unit that we
-- are not interested in.
end Ch10;
--------------
-- Par.Ch11 --
--------------
package Ch11 is
function P_Handled_Sequence_Of_Statements return Node_Id;
function P_Raise_Expression return Node_Id;
function P_Raise_Statement return Node_Id;
function Parse_Exception_Handlers return List_Id;
-- Parses the partial construct EXCEPTION followed by a list of
-- exception handlers which appears in a number of productions, and
-- returns the list of exception handlers.
end Ch11;
--------------
-- Par.Ch12 --
--------------
package Ch12 is
function P_Generic return Node_Id;
function P_Generic_Actual_Part_Opt return List_Id;
end Ch12;
--------------
-- Par.Ch13 --
--------------
package Ch13 is
function P_Representation_Clause return Node_Id;
function Aspect_Specifications_Present
(Strict : Boolean := Ada_Version < Ada_2012) return Boolean;
-- This function tests whether the next keyword is WITH followed by
-- something that looks reasonably like an aspect specification. If so,
-- True is returned. Otherwise False is returned. In either case control
-- returns with the token pointer unchanged (i.e. pointing to the WITH
-- token in the case where True is returned). This function takes care
-- of generating appropriate messages if aspect specifications appear
-- in versions of Ada prior to Ada 2012. The parameter strict can be
-- set to True, to be rather strict about considering something to be
-- an aspect specification. If Strict is False, then the circuitry is
-- rather more generous in considering something ill-formed to be an
-- attempt at an aspect specification. The default is more strict for
-- Ada versions before Ada 2012 (where aspect specifications are not
-- permitted). Note: this routine never checks the terminator token
-- for aspects so it does not matter whether the aspect specifications
-- are terminated by semicolon or some other character.
--
-- Note: This function also handles the case of WHEN used where WITH
-- was intended, and in that case posts an error and returns True.
procedure P_Aspect_Specifications
(Decl : Node_Id;
Semicolon : Boolean := True);
-- This procedure scans out a series of aspect specifications. If
-- argument Semicolon is True, a terminating semicolon is also scanned.
-- If this argument is False, the scan pointer is left pointing past the
-- aspects and the caller must check for a proper terminator.
--
-- P_Aspect_Specifications is called with the current token pointing
-- to either a WITH keyword starting an aspect specification, or an
-- instance of what shpould be a terminator token. In the former case,
-- the aspect specifications are scanned out including the terminator
-- token if it is a semicolon, and the Has_Aspect_Specifications
-- flag is set in the given declaration node. A list of aspects
-- is built and stored for this declaration node using a call to
-- Set_Aspect_Specifications. If no WITH keyword is present, then this
-- call has no effect other than scanning out the terminator if it is a
-- semicolon (with the exception that it detects WHEN used in place of
-- WITH).
-- If Decl is Error on entry, any scanned aspect specifications are
-- ignored and a message is output saying aspect specifications not
-- permitted here. If Decl is Empty, then scanned aspect specifications
-- are also ignored, but no error message is given (this is used when
-- the caller has already taken care of the error message).
function Get_Aspect_Specifications
(Semicolon : Boolean := True) return List_Id;
-- Parse a list of aspects but do not attach them to a declaration node.
-- Subsidiary to P_Aspect_Specifications procedure. Used when parsing
-- a subprogram specification that may be a declaration or a body.
-- Semicolon has the same meaning as for P_Aspect_Specifications above.
function P_Code_Statement (Subtype_Mark : Node_Id) return Node_Id;
-- Function to parse a code statement. The caller has scanned out
-- the name to be used as the subtype mark (but has not checked that
-- it is suitable for use as a subtype mark, i.e. is either an
-- identifier or a selected component). The current token is an
-- apostrophe and the following token is either a left paren or
-- RANGE (the latter being an error to be caught by P_Code_Statement.
end Ch13;
-- Note: the parsing for annexe J features (i.e. obsolescent features)
-- is found in the logical section where these features would be if
-- they were not obsolescent. In particular:
-- Delta constraint is parsed by P_Delta_Constraint (3.5.9)
-- At clause is parsed by P_At_Clause (13.1)
-- Mod clause is parsed by P_Mod_Clause (13.5.1)
--------------
-- Par.Endh --
--------------
-- Routines for handling end lines, including scope recovery
package Endh is
function Check_End
(Decl : Node_Id := Empty;
Is_Loc : Source_Ptr := No_Location) return Boolean;
-- Called when an end sequence is required. In the absence of an error
-- situation, Token contains Tok_End on entry, but in a missing end
-- case, this may not be the case. Pop_End_Context is used to determine
-- the appropriate action to be taken. The returned result is True if
-- an End sequence was encountered and False if no End sequence was
-- present. This occurs if the END keyword encountered was determined
-- to be improper and deleted (i.e. Pop_End_Context set End_Action to
-- Skip_And_Reject). Note that the END sequence includes a semicolon,
-- except in the case of END RECORD, where a semicolon follows the END
-- RECORD, but is not part of the record type definition itself.
--
-- If Decl is non-empty, then aspect specifications are permitted
-- following the end, and Decl is the declaration node with which
-- these aspect specifications are to be associated. If Decl is empty,
-- then aspect specifications are not permitted and will generate an
-- error message.
--
-- Is_Loc is set to other than the default only for the case of a
-- package declaration. It points to the IS keyword of the declaration,
-- and is used to specialize the error messages for misplaced aspect
-- specifications in this case. Note that Decl is always Empty if Is_Loc
-- is set.
procedure End_Skip;
-- Skip past an end sequence. On entry Token contains Tok_End, and we
-- we know that the end sequence is syntactically incorrect, and that
-- an appropriate error message has already been posted. The mission
-- is simply to position the scan pointer to be the best guess of the
-- position after the end sequence. We do not issue any additional
-- error messages while carrying this out.
procedure End_Statements
(Parent : Node_Id := Empty;
Decl : Node_Id := Empty;
Is_Sloc : Source_Ptr := No_Location);
-- Called when an end is required or expected to terminate a sequence
-- of statements. The caller has already made an appropriate entry in
-- the Scope.Table to describe the expected form of the end. This can
-- only be used in cases where the only appropriate terminator is end.
-- If Parent is non-empty, then if a correct END line is encountered,
-- the End_Label field of Parent is set appropriately.
--
-- If Decl is non-null, then it is a declaration node, and aspect
-- specifications are permitted after the end statement. These aspect
-- specifications, if present, are stored in this declaration node.
-- If Decl is null, then aspect specifications are not permitted after
-- the end statement.
--
-- In the case where Decl is null, Is_Sloc determines the handling. If
-- it is set to No_Location, then aspect specifications are ignored and
-- an error message is given. Is_Sloc is used in the package declaration
-- case to point to the IS, and is used to specialize the error emssages
-- issued in this case.
end Endh;
--------------
-- Par.Sync --
--------------
-- These procedures are used to resynchronize after errors. Following an
-- error which is not immediately locally recoverable, the exception
-- Error_Resync is raised. The handler for Error_Resync typically calls
-- one of these recovery procedures to resynchronize the source position
-- to a point from which parsing can be restarted.
-- Note: these procedures output an information message that tokens are
-- being skipped, but this message is output only if the option for
-- Multiple_Errors_Per_Line is set in Options.
package Sync is
procedure Resync_Choice;
-- Used if an error occurs scanning a choice. The scan pointer is
-- advanced to the next vertical bar, arrow, or semicolon, whichever
-- comes first. We also quit if we encounter an end of file.
procedure Resync_Cunit;
-- Synchronize to next token which could be the start of a compilation
-- unit, or to the end of file token.
procedure Resync_Expression;
-- Used if an error is detected during the parsing of an expression.
-- It skips past tokens until either a token which cannot be part of
-- an expression is encountered (an expression terminator), or if a
-- comma or right parenthesis or vertical bar is encountered at the
-- current parenthesis level (a parenthesis level counter is maintained
-- to carry out this test).
procedure Resync_Past_Malformed_Aspect;
-- Used when parsing aspect specifications to skip a malformed aspect.
-- The scan pointer is positioned next to a comma, a semicolon or "is"
-- when the aspect applies to a body.
procedure Resync_Past_Semicolon;
-- Used if an error occurs while scanning a sequence of declarations.
-- The scan pointer is positioned past the next semicolon and the scan
-- resumes. The scan is also resumed on encountering a token which
-- starts a declaration (but we make sure to skip at least one token
-- in this case, to avoid getting stuck in a loop).
procedure Resync_Past_Semicolon_Or_To_Loop_Or_Then;
-- Used if an error occurs while scanning a sequence of statements. The
-- scan pointer is positioned past the next semicolon, or to the next
-- occurrence of either then or loop, and the scan resumes.
procedure Resync_Semicolon_List;
-- Used if an error occurs while scanning a parenthesized list of items
-- separated by semicolons. The scan pointer is advanced to the next
-- semicolon or right parenthesis at the outer parenthesis level, or
-- to the next is or RETURN keyword occurrence, whichever comes first.
procedure Resync_To_Semicolon;
-- Similar to Resync_Past_Semicolon, except that the scan pointer is
-- left pointing to the semicolon rather than past it.
procedure Resync_To_When;
-- Used when an error occurs scanning an entry index specification. The
-- scan pointer is positioned to the next WHEN (or to IS or semicolon if
-- either of these appear before WHEN, indicating another error has
-- occurred).
end Sync;
--------------
-- Par.Tchk --
--------------
-- Routines to check for expected tokens
package Tchk is
-- Procedures with names of the form T_xxx, where Tok_xxx is a token
-- name, check that the current token matches the required token, and
-- if so, scan past it. If not, an error is issued indicating that
-- the required token is not present (xxx expected). In most cases, the
-- scan pointer is not moved in the not-found case, but there are some
-- exceptions to this, see for example T_Id, where the scan pointer is
-- moved across a literal appearing where an identifier is expected.
procedure T_Abort;
procedure T_Arrow;
procedure T_At;
procedure T_Body;
procedure T_Box;
procedure T_Colon;
procedure T_Colon_Equal;
procedure T_Comma;
procedure T_Dot_Dot;
procedure T_For;
procedure T_Greater_Greater;
procedure T_Identifier;
procedure T_In;
procedure T_Is;
procedure T_Left_Paren;
procedure T_Loop;
procedure T_Mod;
procedure T_New;
procedure T_Of;
procedure T_Or;
procedure T_Private;
procedure T_Range;
procedure T_Record;
procedure T_Right_Bracket;
procedure T_Right_Paren;
procedure T_Semicolon;
procedure T_Then;
procedure T_Type;
procedure T_Use;
procedure T_When;
procedure T_With;
-- Procedures having names of the form TF_xxx, where Tok_xxx is a token
-- name check that the current token matches the required token, and
-- if so, scan past it. If not, an error message is issued indicating
-- that the required token is not present (xxx expected).
-- If the missing token is at the end of the line, then control returns
-- immediately after posting the message. If there are remaining tokens
-- on the current line, a search is conducted to see if the token
-- appears later on the current line, as follows:
-- A call to Scan_Save is issued and a forward search for the token
-- is carried out. If the token is found on the current line before a
-- semicolon, then it is scanned out and the scan continues from that
-- point. If not the scan is restored to the point where it was missing.
procedure TF_Arrow;
procedure TF_Is;
procedure TF_Loop;
procedure TF_Return;
procedure TF_Semicolon;
procedure TF_Then;
procedure TF_Use;
-- Procedures with names of the form U_xxx, where Tok_xxx is a token
-- name, are just like the corresponding T_xxx procedures except that
-- an error message, if given, is unconditional.
procedure U_Left_Paren;
procedure U_Right_Paren;
end Tchk;
--------------
-- Par.Util --
--------------
package Util is
function Bad_Spelling_Of (T : Token_Type) return Boolean;
-- This function is called in an error situation. It checks if the
-- current token is an identifier whose name is a plausible bad
-- spelling of the given keyword token, and if so, issues an error
-- message, sets Token from T, and returns True. Otherwise Token is
-- unchanged, and False is returned.
procedure Check_Bad_Layout;
-- Check for bad indentation in RM checking mode. Used for statements
-- and declarations. Checks if current token is at start of line and
-- is exdented from the current expected end column, and if so an
-- error message is generated.
procedure Check_Misspelling_Of (T : Token_Type);
pragma Inline (Check_Misspelling_Of);
-- This is similar to the function above, except that it does not
-- return a result. It is typically used in a situation where any
-- identifier is an error, and it makes sense to simply convert it
-- to the given token if it is a plausible misspelling of it.
procedure Check_95_Keyword (Token_95, Next : Token_Type);
-- This routine checks if the token after the current one matches the
-- Next argument. If so, the scan is backed up to the current token
-- and Token_Type is changed to Token_95 after issuing an appropriate
-- error message ("(Ada 83) keyword xx cannot be used"). If not,
-- the scan is backed up with Token_Type unchanged. This routine
-- is used to deal with an attempt to use a 95 keyword in Ada 83
-- mode. The caller has typically checked that the current token,
-- an identifier, matches one of the 95 keywords.
procedure Check_Future_Keyword;
-- Emit a warning if the current token is a valid identifier in the
-- language version in use, but is a reserved word in a later language
-- version (unless the language version in use is Ada 83).
procedure Check_Simple_Expression (E : Node_Id);
-- Given an expression E, that has just been scanned, so that Expr_Form
-- is still set, outputs an error if E is a non-simple expression. E is
-- not modified by this call.
procedure Check_Simple_Expression_In_Ada_83 (E : Node_Id);
-- Like Check_Simple_Expression, except that the error message is only
-- given when operating in Ada 83 mode, and includes "in Ada 83".
function Check_Subtype_Mark (Mark : Node_Id) return Node_Id;
-- Called to check that a node representing a name (or call) is
-- suitable for a subtype mark, i.e, that it is an identifier or
-- a selected component. If so, or if it is already Error, then
-- it is returned unchanged. Otherwise an error message is issued
-- and Error is returned.
function Comma_Present return Boolean;
-- Used in comma delimited lists to determine if a comma is present, or
-- can reasonably be assumed to have been present (an error message is
-- generated in the latter case). If True is returned, the scan has been
-- positioned past the comma. If False is returned, the scan position
-- is unchanged. Note that all comma-delimited lists are terminated by
-- a right paren, so the only legitimate tokens when Comma_Present is
-- called are right paren and comma. If some other token is found, then
-- Comma_Present has the job of deciding whether it is better to pretend
-- a comma was present, post a message for a missing comma and return
-- True, or return False and let the caller diagnose the missing right
-- parenthesis.
procedure Discard_Junk_Node (N : Node_Id);
procedure Discard_Junk_List (L : List_Id);
pragma Inline (Discard_Junk_Node);
pragma Inline (Discard_Junk_List);
-- These procedures do nothing at all, their effect is simply to discard
-- the argument. A typical use is to skip by some junk that is not
-- expected in the current context.
procedure Ignore (T : Token_Type);
-- If current token matches T, then give an error message and skip
-- past it, otherwise the call has no effect at all. T may be any
-- reserved word token, or comma, left or right paren, or semicolon.
function Is_Reserved_Identifier (C : Id_Check := None) return Boolean;
-- Test if current token is a reserved identifier. This test is based
-- on the token being a keyword and being spelled in typical identifier
-- style (i.e. starting with an upper case letter). The parameter C
-- determines the special treatment if a reserved word is encountered
-- that has the normal casing of a reserved word.
procedure Merge_Identifier (Prev : Node_Id; Nxt : Token_Type);
-- Called when the previous token is an identifier (whose Token_Node
-- value is given by Prev) to check if current token is an identifier
-- that can be merged with the previous one adding an underscore. The
-- merge is only attempted if the following token matches Nxt. If all
-- conditions are met, an error message is issued, and the merge is
-- carried out, modifying the Chars field of Prev.
function Missing_Semicolon_On_When return Boolean;
-- This function deals with the following specialized situations
--
-- when 'x' =>
-- exit/return [identifier]
-- when 'y' =>
--
-- This looks like a messed up EXIT WHEN or RETURN WHEN, when in fact
-- the problem is a missing semicolon. It is called with Token pointing
-- to the WHEN token, and returns True if a semicolon is missing before
-- the WHEN as in the above example.
function Next_Token_Is (Tok : Token_Type) return Boolean;
-- Looks at token after current one and returns True if the token type
-- matches Tok. The scan is unconditionally restored on return.
procedure No_Constraint;
-- Called in a place where no constraint is allowed, but one might
-- appear due to a common error (e.g. after the type mark in a procedure
-- parameter. If a constraint is present, an error message is posted,
-- and the constraint is scanned and discarded.
procedure Push_Scope_Stack;
pragma Inline (Push_Scope_Stack);
-- Push a new entry onto the scope stack. Scope.Last (the stack pointer)
-- is incremented. The Junk field is preinitialized to False. The caller
-- is expected to fill in all remaining entries of the new top stack
-- entry at Scopes (Scope.Last).
procedure Pop_Scope_Stack;
-- Pop an entry off the top of the scope stack. Scope_Last (the scope
-- table stack pointer) is decremented by one. It is a fatal error to
-- try to pop off the dummy entry at the bottom of the stack (i.e.
-- Scope.Last must be non-zero at the time of call).
function Separate_Present return Boolean;
-- Determines if the current token is either Tok_Separate, or an
-- identifier that is a possible misspelling of "separate" followed
-- by a semicolon. True is returned if so, otherwise False.
procedure Signal_Bad_Attribute;
-- The current token is an identifier that is supposed to be an
-- attribute identifier but is not. This routine posts appropriate
-- error messages, including a check for a near misspelling.
function Token_Is_At_Start_Of_Line return Boolean;
pragma Inline (Token_Is_At_Start_Of_Line);
-- Determines if the current token is the first token on the line
function Token_Is_At_End_Of_Line return Boolean;
-- Determines if the current token is the last token on the line
procedure Warn_If_Standard_Redefinition (N : Node_Id);
-- Issues a warning if Warn_On_Standard_Redefinition is set True, and
-- the Node N (which is a Defining_Identifier node with the Chars field
-- set) is a renaming of an entity in package Standard.
end Util;
--------------
-- Par.Prag --
--------------
-- The processing for pragmas is split off from chapter 2
function Prag (Pragma_Node : Node_Id; Semi : Source_Ptr) return Node_Id;
-- This function is passed a tree for a pragma that has been scanned out.
-- The pragma is syntactically well formed according to the general syntax
-- for pragmas and the pragma identifier is for one of the recognized
-- pragmas. It performs specific syntactic checks for specific pragmas.
-- The result is the input node if it is OK, or Error otherwise. The
-- reason that this is separated out is to facilitate the addition
-- of implementation defined pragmas. The second parameter records the
-- location of the semicolon following the pragma (this is needed for
-- correct processing of the List and Page pragmas). The returned value
-- is a copy of Pragma_Node, or Error if an error is found. Note that
-- at the point where Prag is called, the right paren ending the pragma
-- has been scanned out, and except in the case of pragma Style_Checks,
-- so has the following semicolon. For Style_Checks, the caller delays
-- the scanning of the semicolon so that it will be scanned using the
-- settings from the Style_Checks pragma preceding it.
--------------
-- Par.Labl --
--------------
procedure Labl;
-- This procedure creates implicit label declarations for all labels that
-- are declared in the current unit. Note that this could conceptually be
-- done at the point where the labels are declared, but it is tricky to do
-- it then, since the tree is not hooked up at the point where the label is
-- declared (e.g. a sequence of statements is not yet attached to its
-- containing scope at the point a label in the sequence is found).
--------------
-- Par.Load --
--------------
procedure Load;
-- This procedure loads all subsidiary units that are required by this
-- unit, including with'ed units, specs for bodies, and parents for child
-- units. It does not load bodies for inlined procedures and generics,
-- since we don't know till semantic analysis is complete what is needed.
-----------
-- Stubs --
-----------
-- The package bodies can see all routines defined in all other subpackages
use Ch2;
use Ch3;
use Ch4;
use Ch5;
use Ch6;
use Ch7;
use Ch8;
use Ch9;
use Ch10;
use Ch11;
use Ch12;
use Ch13;
use Endh;
use Tchk;
use Sync;
use Util;
package body Ch2 is separate;
package body Ch3 is separate;
package body Ch4 is separate;
package body Ch5 is separate;
package body Ch6 is separate;
package body Ch7 is separate;
package body Ch8 is separate;
package body Ch9 is separate;
package body Ch10 is separate;
package body Ch11 is separate;
package body Ch12 is separate;
package body Ch13 is separate;
package body Endh is separate;
package body Tchk is separate;
package body Sync is separate;
package body Util is separate;
function Prag (Pragma_Node : Node_Id; Semi : Source_Ptr) return Node_Id
is separate;
procedure Labl is separate;
procedure Load is separate;
Result : List_Id := Empty_List;
-- Start of processing for Par
begin
Compiler_State := Parsing;
-- Deal with configuration pragmas case first
if Configuration_Pragmas then
declare
Pragmas : constant List_Id := Empty_List;
P_Node : Node_Id;
begin
loop
if Token = Tok_EOF then
Result := Pragmas;
exit;
elsif Token /= Tok_Pragma then
Error_Msg_SC ("only pragmas allowed in configuration file");
Result := Error_List;
exit;
else
P_Node := P_Pragma;
if Nkind (P_Node) = N_Pragma then
-- Give error if bad pragma
if not Is_Configuration_Pragma_Name
(Pragma_Name_Unmapped (P_Node))
and then
Pragma_Name_Unmapped (P_Node) /= Name_Source_Reference
then
if Is_Pragma_Name (Pragma_Name_Unmapped (P_Node)) then
Error_Msg_N
("only configuration pragmas allowed " &
"in configuration file", P_Node);
else
Error_Msg_N
("unrecognized pragma in configuration file",
P_Node);
end if;
-- Pragma is OK config pragma, so collect it
else
Append (P_Node, Pragmas);
end if;
end if;
end if;
end loop;
end;
if Config_Files_Store_Basename then
Complete_Source_File_Entry;
end if;
-- Normal case of compilation unit
else
Save_Config_Attrs := Save_Config_Switches;
-- The following loop runs more than once in syntax check mode
-- where we allow multiple compilation units in the same file
-- and in Multiple_Unit_Per_file mode where we skip units till
-- we get to the unit we want.
for Ucount in Pos loop
Set_Config_Switches
(Is_Internal_Unit (Current_Source_Unit),
Main_Unit => Current_Source_Unit = Main_Unit);
-- Initialize scope table and other parser control variables
Compiler_State := Parsing;
Scope.Init;
Scope.Increment_Last;
Scopes (0).Etyp := E_Dummy;
SIS_Entry_Active := False;
Last_Resync_Point := No_Location;
Goto_List := New_Elmt_List;
Label_List := New_Elmt_List;
-- If in multiple unit per file mode, skip past ignored unit
if Ucount < Multiple_Unit_Index then
-- We skip in syntax check only mode, since we don't want to do
-- anything more than skip past the unit and ignore it. This means
-- we skip processing like setting up a unit table entry.
declare
Save_Operating_Mode : constant Operating_Mode_Type :=
Operating_Mode;
Save_Style_Check : constant Boolean := Style_Check;
begin
Operating_Mode := Check_Syntax;
Style_Check := False;
Discard_Node (P_Compilation_Unit);
Operating_Mode := Save_Operating_Mode;
Style_Check := Save_Style_Check;
-- If we are at an end of file, and not yet at the right unit,
-- then we have a fatal error. The unit is missing.
if Token = Tok_EOF then
Error_Msg_SC ("file has too few compilation units");
raise Unrecoverable_Error;
end if;
end;
-- Here if we are not skipping a file in multiple unit per file mode.
-- Parse the unit that we are interested in. Note that in check
-- syntax mode we are interested in all units in the file.
else
declare
Comp_Unit_Node : constant Node_Id := P_Compilation_Unit;
begin
-- If parsing was successful and we are not in check syntax
-- mode, check that language-defined units are compiled in GNAT
-- mode. For this purpose we do NOT consider renamings in annex
-- J as predefined. That allows users to compile their own
-- versions of these files. Another exception is System.RPC
-- and its children. This allows a user to supply their own
-- communication layer.
-- Similarly, we do not generate an error in CodePeer mode,
-- to allow users to analyze third-party compiler packages.
if Comp_Unit_Node /= Error
and then Operating_Mode = Generate_Code
and then Current_Source_Unit = Main_Unit
and then not GNAT_Mode
and then not CodePeer_Mode
then
declare
Uname : constant String :=
Get_Name_String
(Unit_Name (Current_Source_Unit));
Name : String renames
Uname (Uname'First .. Uname'Last - 2);
-- Because Unit_Name includes "%s"/"%b", we need to strip
-- the last two characters to get the real unit name.
begin
if Name = "ada" or else
Name = "interfaces" or else
Name = "system"
then
Error_Msg
("language-defined units cannot be recompiled",
Sloc (Unit (Comp_Unit_Node)));
elsif Name'Length > 4
and then
Name (Name'First .. Name'First + 3) = "ada."
then
Error_Msg
("user-defined descendants of package Ada " &
"are not allowed",
Sloc (Unit (Comp_Unit_Node)));
elsif Name'Length > 11
and then
Name (Name'First .. Name'First + 10) = "interfaces."
then
Error_Msg
("user-defined descendants of package Interfaces " &
"are not allowed",
Sloc (Unit (Comp_Unit_Node)));
elsif Name'Length > 7
and then Name (Name'First .. Name'First + 6) = "system."
and then Name /= "system.rpc"
and then
(Name'Length < 11
or else Name (Name'First .. Name'First + 10) /=
"system.rpc.")
then
Error_Msg
("user-defined descendants of package System " &
"are not allowed",
Sloc (Unit (Comp_Unit_Node)));
end if;
end;
end if;
end;
-- All done if at end of file
exit when Token = Tok_EOF;
-- If we are not at an end of file, it means we are in syntax
-- check only mode, and we keep the loop going to parse all
-- remaining units in the file.
end if;
Restore_Config_Switches (Save_Config_Attrs);
end loop;
-- Now that we have completely parsed the source file, we can complete
-- the source file table entry.
Complete_Source_File_Entry;
-- An internal error check, the scope stack should now be empty
pragma Assert (Scope.Last = 0);
-- Here we make the SCO table entries for the main unit
if Generate_SCO then
SCO_Record_Raw (Main_Unit);
end if;
-- Remaining steps are to create implicit label declarations and to load
-- required subsidiary sources. These steps are required only if we are
-- doing semantic checking.
if Operating_Mode /= Check_Syntax or else Debug_Flag_F then
Par.Labl;
Par.Load;
end if;
-- Restore settings of switches saved on entry
Restore_Config_Switches (Save_Config_Attrs);
Set_Comes_From_Source_Default (False);
end if;
Compiler_State := Analyzing;
Current_Source_File := No_Source_File;
return Result;
end Par;