;; Machine description for GNU compiler, ;; for ATMEL AVR micro controllers. ;; Copyright (C) 1998-2021 Free Software Foundation, Inc. ;; Contributed by Denis Chertykov (chertykov@gmail.com)

;; This file is part of GCC.

;; GCC is free software; you can redistribute it and/or modify ;; it under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 3, or (at your option) ;; any later version.

;; GCC is distributed in the hope that it will be useful, ;; but WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ;; GNU General Public License for more details.

;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; http://www.gnu.org/licenses/.

;; Special characters after ‘%’: ;; A No effect (add 0). ;; B Add 1 to REG number, MEM address or CONST_INT. ;; C Add 2. ;; D Add 3. ;; E reg number in XEXP(x, 0). ;; F Add 1 to reg number. ;; I reg number in XEXP(XEXP(x, 0), 0). ;; J Add 1 to reg number. ;; j Branch condition. ;; k Reverse branch condition. ;;..m..Constant Direct Data memory address. ;; i Print the SFR address quivalent of a CONST_INT or a CONST_INT ;; RAM address. The resulting address is suitable to be used in IN/OUT. ;; o Displacement for (mem (plus (reg) (const_int))) operands. ;; p POST_INC or PRE_DEC address as a pointer (X, Y, Z) ;; r POST_INC or PRE_DEC address as a register (r26, r28, r30) ;; r Print a REG without the register prefix ‘r’. ;; T/T Print operand suitable for BLD/BST instruction, i.e. register and ;; bit number. This gets 2 operands: The first %T gets a REG_P and ;; just cashes the operand for the next %T. The second %T gets ;; a CONST_INT that represents a bit position. ;; Example: With %0 = (reg:HI 18) and %1 = (const_int 13) ;; “%T0%T1” it will print “r19,5”. ;; Notice that you must not write a comma between %T0 and %T1. ;; T/t Similar to above, but don't print the comma and the bit number. ;; Example: With %0 = (reg:HI 18) and %1 = (const_int 13) ;; “%T0%t1” it will print “r19”. ;;..x..Constant Direct Program memory address. ;; ~ Output ‘r’ if not AVR_HAVE_JMP_CALL. ;; ! Output ‘e’ if AVR_HAVE_EIJMP_EICALL.

(define_constants [(REG_X 26) (REG_Y 28) (REG_Z 30) (REG_W 24) (REG_SP 32) (REG_CC 36) (LPM_REGNO 0) ; implicit target register of LPM (TMP_REGNO 0) ; temporary register r0 (ZERO_REGNO 1) ; zero register r1 ])

(define_constants [(TMP_REGNO_TINY 16) ; r16 is temp register for AVR_TINY (ZERO_REGNO_TINY 17) ; r17 is zero register for AVR_TINY ])

(define_c_enum “unspec” [UNSPEC_STRLEN UNSPEC_CPYMEM UNSPEC_INDEX_JMP UNSPEC_FMUL UNSPEC_FMULS UNSPEC_FMULSU UNSPEC_COPYSIGN UNSPEC_IDENTITY UNSPEC_INSERT_BITS UNSPEC_ROUND ])

(define_c_enum “unspecv” [UNSPECV_PROLOGUE_SAVES UNSPECV_EPILOGUE_RESTORES UNSPECV_WRITE_SP UNSPECV_GASISR UNSPECV_GOTO_RECEIVER UNSPECV_ENABLE_IRQS UNSPECV_MEMORY_BARRIER UNSPECV_NOP UNSPECV_SLEEP UNSPECV_WDR UNSPECV_DELAY_CYCLES ])

;; Chunk numbers for __gcc_isr are hard-coded in GAS. (define_constants [(GASISR_Prologue 1) (GASISR_Epilogue 2) (GASISR_Done 0) ])

(include “predicates.md”) (include “constraints.md”)

;; Condition code settings. (define_attr “cc” “none,set_czn,set_zn,set_vzn,set_n,compare,clobber, plus,ldi” (const_string “none”))

(define_attr “type” “branch,branch1,arith,xcall” (const_string “arith”))

;; The size of instructions in bytes. ;; XXX may depend from “cc”

(define_attr “length” "" (cond [(eq_attr “type” “branch”) (if_then_else (and (ge (minus (pc) (match_dup 0)) (const_int -62)) (le (minus (pc) (match_dup 0)) (const_int 62))) (const_int 1) (if_then_else (and (ge (minus (pc) (match_dup 0)) (const_int -2044)) (le (minus (pc) (match_dup 0)) (const_int 2045))) (const_int 2) (const_int 3))) (eq_attr “type” “branch1”) (if_then_else (and (ge (minus (pc) (match_dup 0)) (const_int -62)) (le (minus (pc) (match_dup 0)) (const_int 61))) (const_int 2) (if_then_else (and (ge (minus (pc) (match_dup 0)) (const_int -2044)) (le (minus (pc) (match_dup 0)) (const_int 2043))) (const_int 3) (const_int 4))) (eq_attr “type” “xcall”) (if_then_else (match_test “!AVR_HAVE_JMP_CALL”) (const_int 1) (const_int 2))] (const_int 2)))

;; Lengths of several insns are adjusted in avr.c:adjust_insn_length(). ;; Following insn attribute tells if and how the adjustment has to be ;; done: ;; no No adjustment needed; attribute “length” is fine. ;; Otherwise do special processing depending on the attribute.

(define_attr “adjust_len” “out_bitop, plus, addto_sp, sext, tsthi, tstpsi, tstsi, compare, compare64, call, mov8, mov16, mov24, mov32, reload_in16, reload_in24, reload_in32, ufract, sfract, round, xload, cpymem, ashlqi, ashrqi, lshrqi, ashlhi, ashrhi, lshrhi, ashlsi, ashrsi, lshrsi, ashlpsi, ashrpsi, lshrpsi, insert_bits, insv_notbit, insv_notbit_0, insv_notbit_7, no” (const_string “no”))

;; Flavours of instruction set architecture (ISA), used in enabled attribute

;; mov : ISA has no MOVW movw : ISA has MOVW ;; rjmp : ISA has no CALL/JMP jmp : ISA has CALL/JMP ;; ijmp : ISA has no EICALL/EIJMP eijmp : ISA has EICALL/EIJMP ;; lpm : ISA has no LPMX lpmx : ISA has LPMX ;; elpm : ISA has ELPM but no ELPMX elpmx : ISA has ELPMX ;; no_xmega: non-XMEGA core xmega : XMEGA core ;; no_tiny: non-TINY core tiny : TINY core

(define_attr “isa” “mov,movw, rjmp,jmp, ijmp,eijmp, lpm,lpmx, elpm,elpmx, no_xmega,xmega, no_tiny,tiny, standard” (const_string “standard”))

(define_attr “enabled” "" (cond [(eq_attr “isa” “standard”) (const_int 1)

     (and (eq_attr "isa" "mov")
          (match_test "!AVR_HAVE_MOVW"))
     (const_int 1)

     (and (eq_attr "isa" "movw")
          (match_test "AVR_HAVE_MOVW"))
     (const_int 1)

     (and (eq_attr "isa" "rjmp")
          (match_test "!AVR_HAVE_JMP_CALL"))
     (const_int 1)

     (and (eq_attr "isa" "jmp")
          (match_test "AVR_HAVE_JMP_CALL"))
     (const_int 1)

     (and (eq_attr "isa" "ijmp")
          (match_test "!AVR_HAVE_EIJMP_EICALL"))
     (const_int 1)

     (and (eq_attr "isa" "eijmp")
          (match_test "AVR_HAVE_EIJMP_EICALL"))
     (const_int 1)

     (and (eq_attr "isa" "lpm")
          (match_test "!AVR_HAVE_LPMX"))
     (const_int 1)

     (and (eq_attr "isa" "lpmx")
          (match_test "AVR_HAVE_LPMX"))
     (const_int 1)

     (and (eq_attr "isa" "elpm")
          (match_test "AVR_HAVE_ELPM && !AVR_HAVE_ELPMX"))
     (const_int 1)

     (and (eq_attr "isa" "elpmx")
          (match_test "AVR_HAVE_ELPMX"))
     (const_int 1)

     (and (eq_attr "isa" "xmega")
          (match_test "AVR_XMEGA"))
     (const_int 1)

     (and (eq_attr "isa" "tiny")
          (match_test "AVR_TINY"))
     (const_int 1)

     (and (eq_attr "isa" "no_xmega")
          (match_test "!AVR_XMEGA"))
     (const_int 1)

     (and (eq_attr "isa" "no_tiny")
          (match_test "!AVR_TINY"))
     (const_int 1)

     ] (const_int 0)))

;; Define mode iterators (define_mode_iterator QIHI [QI HI]) (define_mode_iterator QIHI2 [QI HI]) (define_mode_iterator QISI [QI HI PSI SI]) (define_mode_iterator QIDI [QI HI PSI SI DI]) (define_mode_iterator HISI [HI PSI SI])

(define_mode_iterator ALL1 [QI QQ UQQ]) (define_mode_iterator ALL2 [HI HQ UHQ HA UHA]) (define_mode_iterator ALL4 [SI SQ USQ SA USA])

;; All supported move-modes (define_mode_iterator MOVMODE [QI QQ UQQ HI HQ UHQ HA UHA SI SQ USQ SA USA SF PSI])

;; Supported ordered modes that are 2, 3, 4 bytes wide (define_mode_iterator ORDERED234 [HI SI PSI HQ UHQ HA UHA SQ USQ SA USA])

;; Post-reload split of 3, 4 bytes wide moves. (define_mode_iterator SPLIT34 [SI SF PSI SQ USQ SA USA])

;; Define code iterators ;; Define two incarnations so that we can build the cross product. (define_code_iterator any_extend [sign_extend zero_extend]) (define_code_iterator any_extend2 [sign_extend zero_extend]) (define_code_iterator any_extract [sign_extract zero_extract]) (define_code_iterator any_shiftrt [lshiftrt ashiftrt])

(define_code_iterator bitop [xor ior and]) (define_code_iterator xior [xor ior]) (define_code_iterator eqne [eq ne])

(define_code_iterator ss_addsub [ss_plus ss_minus]) (define_code_iterator us_addsub [us_plus us_minus]) (define_code_iterator ss_abs_neg [ss_abs ss_neg])

;; Define code attributes (define_code_attr extend_su [(sign_extend “s”) (zero_extend “u”)])

(define_code_attr extend_u [(sign_extend "") (zero_extend “u”)])

(define_code_attr extend_s [(sign_extend “s”) (zero_extend "")])

;; Constrain input operand of widening multiply, i.e. MUL resp. MULS. (define_code_attr mul_r_d [(zero_extend “r”) (sign_extend “d”)])

(define_code_attr abelian [(ss_minus "") (us_minus "") (ss_plus “%”) (us_plus “%”)])

;; Map RTX code to its standard insn name (define_code_attr code_stdname [(ashift “ashl”) (ashiftrt “ashr”) (lshiftrt “lshr”) (ior “ior”) (xor “xor”) (rotate “rotl”) (ss_plus “ssadd”) (ss_minus “sssub”) (ss_neg “ssneg”) (ss_abs “ssabs”) (us_plus “usadd”) (us_minus “ussub”) (us_neg “usneg”) ])

;;======================================================================== ;; The following is used by nonlocal_goto and setjmp. ;; The receiver pattern will create no instructions since internally ;; virtual_stack_vars = hard_frame_pointer + 1 so the RTL become R28=R28 ;; This avoids creating add/sub offsets in frame_pointer save/resore. ;; The ‘null’ receiver also avoids problems with optimisation ;; not recognising incoming jmp and removing code that resets frame_pointer. ;; The code derived from builtins.c.

(define_expand “nonlocal_goto_receiver” [(set (reg:HI REG_Y) (unspec_volatile:HI [(const_int 0)] UNSPECV_GOTO_RECEIVER))] "" { rtx offset = gen_int_mode (targetm.starting_frame_offset (), Pmode); emit_move_insn (virtual_stack_vars_rtx, gen_rtx_PLUS (Pmode, hard_frame_pointer_rtx, offset)); /* ; This might change the hard frame pointer in ways that aren't ; apparent to early optimization passes, so force a clobber. */ emit_clobber (hard_frame_pointer_rtx); DONE; })

;; Defining nonlocal_goto_receiver means we must also define this ;; even though its function is identical to that in builtins.c

(define_expand “nonlocal_goto” [(use (match_operand 0 “general_operand”)) (use (match_operand 1 “general_operand”)) (use (match_operand 2 “general_operand”)) (use (match_operand 3 “general_operand”))] "" { rtx r_label = copy_to_reg (operands[1]); rtx r_fp = operands[3]; rtx r_sp = operands[2];

emit_clobber (gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (VOIDmode)));

emit_clobber (gen_rtx_MEM (BLKmode, hard_frame_pointer_rtx));

emit_move_insn (hard_frame_pointer_rtx, r_fp);
emit_stack_restore (SAVE_NONLOCAL, r_sp);

emit_use (hard_frame_pointer_rtx);
emit_use (stack_pointer_rtx);

emit_indirect_jump (r_label);

DONE;

})

;; “pushqi1” ;; “pushqq1” “pushuqq1” (define_insn “push1” [(set (mem:ALL1 (post_dec:HI (reg:HI REG_SP))) (match_operand:ALL1 0 “reg_or_0_operand” “r,Y00”))] "" “@ push %0 push zero_reg” [(set_attr “length” “1,1”)])

(define_insn “pushhi1_insn” [(set (mem:HI (post_dec:HI (reg:HI REG_SP))) (match_operand:HI 0 “register_operand” “r”))] "" “push %B0;push %A0” [(set_attr “length” “2”)])

;; All modes for a multi-byte push. We must include complex modes here too, ;; lest emit_single_push_insn “helpfully” create the auto-inc itself. (define_mode_iterator MPUSH [CQI HI CHI HA UHA HQ UHQ SI CSI SA USA SQ USQ DI CDI DA UDA DQ UDQ TA UTA SF DF SC DC PSI])

(define_expand “push1” [(match_operand:MPUSH 0 "" "")] "" { if (MEM_P (operands[0]) && !ADDR_SPACE_GENERIC_P (MEM_ADDR_SPACE (operands[0]))) { // Avoid (subreg (mem)) for non-generic address spaces. Because // of the poor addressing capabilities of these spaces it's better to // load them in one chunk. And it avoids PR61443.

    operands[0] = copy_to_mode_reg (<MODE>mode, operands[0]);
  }
else if (REG_P (operands[0])
         && IN_RANGE (REGNO (operands[0]), FIRST_VIRTUAL_REGISTER,
                      LAST_VIRTUAL_REGISTER))
  {
    // Byte-wise pushing of virtual regs might result in something like
    //
    //     (set (mem:QI (post_dec:HI (reg:HI 32 SP)))
    //          (subreg:QI (plus:HI (reg:HI 28)
    //                              (const_int 17)) 0))
    //
    // after elimination.  This cannot be handled by reload, cf. PR64452.
    // Reload virtuals in one chunk.  That way it's possible to reload
    // above situation and finally
    //
    //    (set (reg:HI **)
    //         (const_int 17))
    //    (set (reg:HI **)
    //         (plus:HI (reg:HI **)
    //                  (reg:HI 28)))
    //    (set (mem:HI (post_dec:HI (reg:HI 32 SP))
    //         (reg:HI **)))

    emit_insn (gen_pushhi1_insn (operands[0]));
    DONE;
  }

for (int i = GET_MODE_SIZE (<MODE>mode) - 1; i >= 0; --i)
  {
    rtx part = simplify_gen_subreg (QImode, operands[0], <MODE>mode, i);
    if (part != const0_rtx)
      part = force_reg (QImode, part);
    emit_insn (gen_pushqi1 (part));
  }
DONE;

})

;; Notice a special-case when adding N to SP where N results in a ;; zero REG_ARGS_SIZE. This is equivalent to a move from FP. (define_split [(set (reg:HI REG_SP) (match_operand:HI 0 “register_operand” ""))] “reload_completed && frame_pointer_needed && !cfun->calls_alloca && find_reg_note (insn, REG_ARGS_SIZE, const0_rtx) && REGNO (operands[0]) != REG_Y” [(set (reg:HI REG_SP) (reg:HI REG_Y))])

;;======================================================================== ;; Move stuff around

;; “loadqi_libgcc” ;; “loadhi_libgcc” ;; “loadpsi_libgcc” ;; “loadsi_libgcc” ;; “loadsf_libgcc” (define_expand “load_libgcc” [(set (match_dup 3) (match_dup 2)) (set (reg:MOVMODE 22) (match_operand:MOVMODE 1 “memory_operand” "")) (set (match_operand:MOVMODE 0 “register_operand” "") (reg:MOVMODE 22))] “avr_load_libgcc_p (operands[1])” { operands[3] = gen_rtx_REG (HImode, REG_Z); operands[2] = force_operand (XEXP (operands[1], 0), NULL_RTX); operands[1] = replace_equiv_address (operands[1], operands[3]); set_mem_addr_space (operands[1], ADDR_SPACE_FLASH); })

;; “load_qi_libgcc” ;; “load_hi_libgcc” ;; “load_psi_libgcc” ;; “load_si_libgcc” ;; “load_sf_libgcc” (define_insn_and_split “load__libgcc” [(set (reg:MOVMODE 22) (match_operand:MOVMODE 0 “memory_operand” “m,m”))] “avr_load_libgcc_p (operands[0]) && REG_P (XEXP (operands[0], 0)) && REG_Z == REGNO (XEXP (operands[0], 0))” “#” “&& reload_completed” [(parallel [(set (reg:MOVMODE 22) (match_dup 0)) (clobber (reg:CC REG_CC))])] "" [(set_attr “isa” “rjmp,jmp”)])

(define_insn “*load__libgcc” [(set (reg:MOVMODE 22) (match_operand:MOVMODE 0 “memory_operand” “m,m”)) (clobber (reg:CC REG_CC))] “avr_load_libgcc_p (operands[0]) && REG_P (XEXP (operands[0], 0)) && REG_Z == REGNO (XEXP (operands[0], 0)) && reload_completed” { operands[0] = GEN_INT (GET_MODE_SIZE (mode)); return “%~call _load%0”; } [(set_attr “length” “1,2”) (set_attr “isa” “rjmp,jmp”)])

;; “xload8qi_A” ;; “xload8qq_A” “xload8uqq_A” (define_insn_and_split “xload8_A” [(set (match_operand:ALL1 0 “register_operand” “=r”) (match_operand:ALL1 1 “memory_operand” “m”)) (clobber (reg:HI REG_Z))] “can_create_pseudo_p() && !avr_xload_libgcc_p (mode) && avr_mem_memx_p (operands[1]) && REG_P (XEXP (operands[1], 0))” { gcc_unreachable(); } “&& 1” [(clobber (const_int 0))] { /* ; Split away the high part of the address. GCC's register allocator ; in not able to allocate segment registers and reload the resulting ; expressions. Notice that no address register can hold a PSImode. */

rtx_insn *insn;
rtx addr = XEXP (operands[1], 0);
rtx hi8 = gen_reg_rtx (QImode);
rtx reg_z = gen_rtx_REG (HImode, REG_Z);

emit_move_insn (reg_z, simplify_gen_subreg (HImode, addr, PSImode, 0));
emit_move_insn (hi8, simplify_gen_subreg (QImode, addr, PSImode, 2));

insn = emit_insn (gen_xload<mode>_8 (operands[0], hi8));
set_mem_addr_space (SET_SRC (single_set (insn)),
                             MEM_ADDR_SPACE (operands[1]));
DONE;

})

;; “xloadqi_A” “xloadqq_A” “xloaduqq_A” ;; “xloadhi_A” “xloadhq_A” “xloaduhq_A” “xloadha_A” “xloaduha_A” ;; “xloadsi_A” “xloadsq_A” “xloadusq_A” “xloadsa_A” “xloadusa_A” ;; “xloadpsi_A” ;; “xloadsf_A” (define_insn_and_split “xload_A” [(set (match_operand:MOVMODE 0 “register_operand” “=r”) (match_operand:MOVMODE 1 “memory_operand” “m”)) (clobber (reg:MOVMODE 22)) (clobber (reg:QI 21)) (clobber (reg:HI REG_Z))] “can_create_pseudo_p() && avr_mem_memx_p (operands[1]) && REG_P (XEXP (operands[1], 0))” { gcc_unreachable(); } “&& 1” [(clobber (const_int 0))] { rtx addr = XEXP (operands[1], 0); rtx reg_z = gen_rtx_REG (HImode, REG_Z); rtx addr_hi8 = simplify_gen_subreg (QImode, addr, PSImode, 2); addr_space_t as = MEM_ADDR_SPACE (operands[1]); rtx_insn *insn;

/* Split the address to R21:Z */
emit_move_insn (reg_z, simplify_gen_subreg (HImode, addr, PSImode, 0));
emit_move_insn (gen_rtx_REG (QImode, 21), addr_hi8);

/* Load with code from libgcc */
insn = emit_insn (gen_xload_<mode>_libgcc ());
set_mem_addr_space (SET_SRC (single_set (insn)), as);

/* Move to destination */
emit_move_insn (operands[0], gen_rtx_REG (<MODE>mode, 22));

DONE;

})

;; Move value from address space memx to a register ;; These insns must be prior to respective generic move insn.

;; “xloadqi_8” ;; “xloadqq_8” “xloaduqq_8” (define_insn “xload_8” [(set (match_operand:ALL1 0 “register_operand” “=&r,r”) (mem:ALL1 (lo_sum:PSI (match_operand:QI 1 “register_operand” “r,r”) (reg:HI REG_Z))))] “!avr_xload_libgcc_p (mode)” { return avr_out_xload (insn, operands, NULL); } [(set_attr “length” “4,4”) (set_attr “adjust_len” “*,xload”) (set_attr “isa” “lpmx,lpm”)])

;; R21:Z : 24-bit source address ;; R22 : 1-4 byte output

;; “xload_qi_libgcc” “xload_qq_libgcc” “xload_uqq_libgcc” ;; “xload_hi_libgcc” “xload_hq_libgcc” “xload_uhq_libgcc” “xload_ha_libgcc” “xload_uha_libgcc” ;; “xload_si_libgcc” “xload_sq_libgcc” “xload_usq_libgcc” “xload_sa_libgcc” “xload_usa_libgcc” ;; “xload_sf_libgcc” ;; “xload_psi_libgcc”

(define_insn_and_split “xload__libgcc” [(set (reg:MOVMODE 22) (mem:MOVMODE (lo_sum:PSI (reg:QI 21) (reg:HI REG_Z)))) (clobber (reg:QI 21)) (clobber (reg:HI REG_Z))] “avr_xload_libgcc_p (mode)” “#” “&& reload_completed” [(parallel [(set (reg:MOVMODE 22) (mem:MOVMODE (lo_sum:PSI (reg:QI 21) (reg:HI REG_Z)))) (clobber (reg:CC REG_CC))])])

(define_insn “*xload__libgcc” [(set (reg:MOVMODE 22) (mem:MOVMODE (lo_sum:PSI (reg:QI 21) (reg:HI REG_Z)))) (clobber (reg:CC REG_CC))] “avr_xload_libgcc_p (mode) && reload_completed” { rtx x_bytes = GEN_INT (GET_MODE_SIZE (mode));

output_asm_insn ("%~call __xload_%0", &x_bytes);
return "";

} [(set_attr “type” “xcall”)])

;; General move expanders

;; “movqi” “movqq” “movuqq” ;; “movhi” “movhq” “movuhq” “movha” “movuha” ;; “movsi” “movsq” “movusq” “movsa” “movusa” ;; “movsf” ;; “movpsi” (define_expand “mov” [(set (match_operand:MOVMODE 0 “nonimmediate_operand” "") (match_operand:MOVMODE 1 “general_operand” ""))] "" { rtx dest = operands[0]; rtx src = avr_eval_addr_attrib (operands[1]);

if (avr_mem_flash_p (dest))
  DONE;

if (QImode == <MODE>mode
    && SUBREG_P (src)
    && CONSTANT_ADDRESS_P (SUBREG_REG (src))
    && can_create_pseudo_p())
  {
    // store_bitfield may want to store a SYMBOL_REF or CONST in a
    // structure that's represented as PSImode.  As the upper 16 bits
    // of PSImode cannot be expressed as an HImode subreg, the rhs is
    // decomposed into QImode (word_mode) subregs of SYMBOL_REF,
    // CONST or LABEL_REF; cf. PR71103.

    rtx const_addr = SUBREG_REG (src);
    operands[1] = src = copy_rtx (src);
    SUBREG_REG (src) = copy_to_mode_reg (GET_MODE (const_addr), const_addr);
  }

/* One of the operands has to be in a register.  */
if (!register_operand (dest, <MODE>mode)
    && !reg_or_0_operand (src, <MODE>mode))
  {
    operands[1] = src = copy_to_mode_reg (<MODE>mode, src);
  }

if (avr_mem_memx_p (src))
  {
    rtx addr = XEXP (src, 0);

    if (!REG_P (addr))
      src = replace_equiv_address (src, copy_to_mode_reg (PSImode, addr));

    if (!avr_xload_libgcc_p (<MODE>mode))
      /* ; No <mode> here because gen_xload8<mode>_A only iterates over ALL1.
         ; insn-emit does not depend on the mode, it's all about operands.  */
      emit_insn (gen_xload8qi_A (dest, src));
    else
      emit_insn (gen_xload<mode>_A (dest, src));

    DONE;
  }

if (avr_load_libgcc_p (src))
  {
    /* For the small devices, do loads per libgcc call.  */
    emit_insn (gen_load<mode>_libgcc (dest, src));
    DONE;
  }

})

;;======================================================================== ;; move byte ;; The last alternative (any immediate constant to any register) is ;; very expensive. It should be optimized by peephole2 if a scratch ;; register is available, but then that register could just as well be ;; allocated for the variable we are loading. But, most of NO_LD_REGS ;; are call-saved registers, and most of LD_REGS are call-used registers, ;; so this may still be a win for registers live across function calls.

(define_insn_and_split “mov_insn_split” [(set (match_operand:ALL1 0 “nonimmediate_operand” “=r ,d ,Qm ,r ,q,r,*r”) (match_operand:ALL1 1 “nox_general_operand” “r Y00,n Ynn,r Y00,Qm,r,q,i”))] “register_operand (operands[0], mode) || reg_or_0_operand (operands[1], mode)” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (match_dup 1)) (clobber (reg:CC REG_CC))])])

;; “movqi_insn” ;; “movqq_insn” “movuqq_insn” (define_insn “mov_insn” [(set (match_operand:ALL1 0 “nonimmediate_operand” “=r ,d ,Qm ,r ,q,r,*r”) (match_operand:ALL1 1 “nox_general_operand” “r Y00,n Ynn,r Y00,Qm,r,q,i”)) (clobber (reg:CC REG_CC))] “(register_operand (operands[0], mode) || reg_or_0_operand (operands[1], mode)) && reload_completed” { return output_movqi (insn, operands, NULL); } [(set_attr “length” “1,1,5,5,1,1,4”) (set_attr “adjust_len” “mov8”)])

;; This is used in peephole2 to optimize loading immediate constants ;; if a scratch register from LD_REGS happens to be available.

;; “*reload_inqi” ;; “*reload_inqq” “*reload_inuqq” (define_insn “*reload_in” [(set (match_operand:ALL1 0 “register_operand” “=l”) (match_operand:ALL1 1 “const_operand” “i”)) (clobber (match_operand:QI 2 “register_operand” “=&d”)) (clobber (reg:CC REG_CC))] “reload_completed” “ldi %2,lo8(%1) mov %0,%2” [(set_attr “length” “2”)])

(define_peephole2 [(match_scratch:QI 2 “d”) (parallel [(set (match_operand:ALL1 0 “l_register_operand” "") (match_operand:ALL1 1 “const_operand” "")) (clobber (reg:CC REG_CC))])] ; No need for a clobber reg for 0x0, 0x01 or 0xff “!satisfies_constraint_Y00 (operands[1]) && !satisfies_constraint_Y01 (operands[1]) && !satisfies_constraint_Ym1 (operands[1])” [(parallel [(set (match_dup 0) (match_dup 1)) (clobber (match_dup 2)) (clobber (reg:CC REG_CC))])])

;;============================================================================ ;; move word (16 bit)

;; Move register $1 to the Stack Pointer register SP. ;; This insn is emit during function prologue/epilogue generation. ;; $2 = 0: We know that IRQs are off ;; $2 = 1: We know that IRQs are on ;; $2 = 2: SP has 8 bits only, IRQ state does not matter ;; $2 = -1: We don't know anything about IRQ on/off ;; Always write SP via unspec, see PR50063

(define_insn “movhi_sp_r” [(set (match_operand:HI 0 “stack_register_operand” “=q,q,q,q,q”) (unspec_volatile:HI [(match_operand:HI 1 “register_operand” “r,r,r,r,r”) (match_operand:HI 2 “const_int_operand” “L,P,N,K,LPN”)] UNSPECV_WRITE_SP))] "" “@ out %B0,%B1;out %A0,%A1 cli;out %B0,%B1;sei;out %A0,%A1 in tmp_reg,SREG;cli;out %B0,%B1;out SREG,tmp_reg;out %A0,%A1 out %A0,%A1 out %A0,%A1;out %B0,%B1” [(set_attr “length” “2,4,5,1,2”) (set_attr “isa” “no_xmega,no_xmega,no_xmega,*,xmega”)])

(define_peephole2 [(match_scratch:QI 2 “d”) (parallel [(set (match_operand:ALL2 0 “l_register_operand” "") (match_operand:ALL2 1 “const_or_immediate_operand” "")) (clobber (reg:CC REG_CC))])] “operands[1] != CONST0_RTX (mode)” [(parallel [(set (match_dup 0) (match_dup 1)) (clobber (match_dup 2)) (clobber (reg:CC REG_CC))])])

;; ‘*’ because it is not used in rtl generation, only in above peephole ;; “*reload_inhi” ;; “*reload_inhq” “*reload_inuhq” ;; “*reload_inha” “*reload_inuha” (define_insn “*reload_in” [(set (match_operand:ALL2 0 “l_register_operand” “=l”) (match_operand:ALL2 1 “immediate_operand” “i”)) (clobber (match_operand:QI 2 “register_operand” “=&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return output_reload_inhi (operands, operands[2], NULL); } [(set_attr “length” “4”) (set_attr “adjust_len” “reload_in16”)])

;; “*movhi” ;; “*movhq” “*movuhq” ;; “*movha” “*movuha” (define_insn_and_split “*mov_split” [(set (match_operand:ALL2 0 “nonimmediate_operand” “=r,r ,r,m ,d,*r,q,r”) (match_operand:ALL2 1 “nox_general_operand” “r,Y00,m,r Y00,i,i ,r,q”))] “register_operand (operands[0], mode) || reg_or_0_operand (operands[1], mode)” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (match_dup 1)) (clobber (reg:CC REG_CC))])])

(define_insn “*mov” [(set (match_operand:ALL2 0 “nonimmediate_operand” “=r,r ,r,m ,d,*r,q,r”) (match_operand:ALL2 1 “nox_general_operand” “r,Y00,m,r Y00,i,i ,r,q”)) (clobber (reg:CC REG_CC))] “(register_operand (operands[0], mode) || reg_or_0_operand (operands[1], mode)) && reload_completed” { return output_movhi (insn, operands, NULL); } [(set_attr “length” “2,2,6,7,2,6,5,2”) (set_attr “adjust_len” “mov16”)])

(define_peephole2 ; movw [(parallel [(set (match_operand:ALL1 0 “even_register_operand” "") (match_operand:ALL1 1 “even_register_operand” "")) (clobber (reg:CC REG_CC))]) (parallel [(set (match_operand:ALL1 2 “odd_register_operand” "") (match_operand:ALL1 3 “odd_register_operand” "")) (clobber (reg:CC REG_CC))])] “AVR_HAVE_MOVW && REGNO (operands[0]) == REGNO (operands[2]) - 1 && REGNO (operands[1]) == REGNO (operands[3]) - 1” [(parallel [(set (match_dup 4) (match_dup 5)) (clobber (reg:CC REG_CC))])] { operands[4] = gen_rtx_REG (HImode, REGNO (operands[0])); operands[5] = gen_rtx_REG (HImode, REGNO (operands[1])); })

(define_peephole2 ; movw_r [(parallel [(set (match_operand:ALL1 0 “odd_register_operand” "") (match_operand:ALL1 1 “odd_register_operand” "")) (clobber (reg:CC REG_CC))]) (parallel [(set (match_operand:ALL1 2 “even_register_operand” "") (match_operand:ALL1 3 “even_register_operand” "")) (clobber (reg:CC REG_CC))])] “AVR_HAVE_MOVW && REGNO (operands[2]) == REGNO (operands[0]) - 1 && REGNO (operands[3]) == REGNO (operands[1]) - 1” [(parallel [(set (match_dup 4) (match_dup 5)) (clobber (reg:CC REG_CC))])] { operands[4] = gen_rtx_REG (HImode, REGNO (operands[2])); operands[5] = gen_rtx_REG (HImode, REGNO (operands[3])); })

;; For LPM loads from AS1 we split ;; R = *Z ;; to ;; R = *Z++ ;; Z = Z - sizeof (R) ;; ;; so that the second instruction can be optimized out.

(define_split ; “split-lpmx” [(set (match_operand:HISI 0 “register_operand” "") (match_operand:HISI 1 “memory_operand” ""))] “reload_completed && AVR_HAVE_LPMX && avr_mem_flash_p (operands[1]) && REG_P (XEXP (operands[1], 0)) && !reg_overlap_mentioned_p (XEXP (operands[1], 0), operands[0])” [(set (match_dup 0) (match_dup 2)) (set (match_dup 3) (plus:HI (match_dup 3) (match_dup 4)))] { rtx addr = XEXP (operands[1], 0);

operands[2] = replace_equiv_address (operands[1],
                                     gen_rtx_POST_INC (Pmode, addr));
operands[3] = addr;
operands[4] = gen_int_mode (-GET_MODE_SIZE (<MODE>mode), HImode);

})

;;========================================================================== ;; xpointer move (24 bit)

(define_peephole2 ; *reload_inpsi [(match_scratch:QI 2 “d”) (parallel [(set (match_operand:PSI 0 “l_register_operand” "") (match_operand:PSI 1 “immediate_operand” "")) (clobber (reg:CC REG_CC))]) (match_dup 2)] “operands[1] != const0_rtx && operands[1] != constm1_rtx” [(parallel [(set (match_dup 0) (match_dup 1)) (clobber (match_dup 2)) (clobber (reg:CC REG_CC))])])

;; ‘*’ because it is not used in rtl generation. (define_insn “*reload_inpsi” [(set (match_operand:PSI 0 “register_operand” “=r”) (match_operand:PSI 1 “immediate_operand” “i”)) (clobber (match_operand:QI 2 “register_operand” “=&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_reload_inpsi (operands, operands[2], NULL); } [(set_attr “length” “6”) (set_attr “adjust_len” “reload_in24”)])

(define_insn_and_split “*movpsi_split” [(set (match_operand:PSI 0 “nonimmediate_operand” “=r,r,r ,Qm,!d,r”) (match_operand:PSI 1 “nox_general_operand” “r,L,Qm,rL,i ,i”))] “register_operand (operands[0], PSImode) || register_operand (operands[1], PSImode) || const0_rtx == operands[1]” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (match_dup 1)) (clobber (reg:CC REG_CC))])])

(define_insn “*movpsi” [(set (match_operand:PSI 0 “nonimmediate_operand” “=r,r,r ,Qm,!d,r”) (match_operand:PSI 1 “nox_general_operand” “r,L,Qm,rL,i ,i”)) (clobber (reg:CC REG_CC))] “(register_operand (operands[0], PSImode) || register_operand (operands[1], PSImode) || const0_rtx == operands[1]) && reload_completed” { return avr_out_movpsi (insn, operands, NULL); } [(set_attr “length” “3,3,8,9,4,10”) (set_attr “adjust_len” “mov24”)])

;;========================================================================== ;; move double word (32 bit)

(define_peephole2 ; *reload_insi [(match_scratch:QI 2 “d”) (parallel [(set (match_operand:ALL4 0 “l_register_operand” "") (match_operand:ALL4 1 “immediate_operand” "")) (clobber (reg:CC REG_CC))]) (match_dup 2)] “operands[1] != CONST0_RTX (mode)” [(parallel [(set (match_dup 0) (match_dup 1)) (clobber (match_dup 2)) (clobber (reg:CC REG_CC))])])

;; ‘*’ because it is not used in rtl generation. ;; “*reload_insi” ;; “*reload_insq” “*reload_inusq” ;; “*reload_insa” “*reload_inusa” (define_insn “*reload_insi” [(set (match_operand:ALL4 0 “register_operand” “=r”) (match_operand:ALL4 1 “immediate_operand” “n Ynn”)) (clobber (match_operand:QI 2 “register_operand” “=&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return output_reload_insisf (operands, operands[2], NULL); } [(set_attr “length” “8”) (set_attr “adjust_len” “reload_in32”)])

;; “*movsi” ;; “*movsq” “*movusq” ;; “*movsa” “*movusa” (define_insn_and_split “*mov_split” [(set (match_operand:ALL4 0 “nonimmediate_operand” “=r,r ,r ,Qm ,!d,r”) (match_operand:ALL4 1 “nox_general_operand” “r,Y00,Qm,r Y00,i ,i”))] “register_operand (operands[0], mode) || reg_or_0_operand (operands[1], mode)” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (match_dup 1)) (clobber (reg:CC REG_CC))])])

(define_insn “*mov” [(set (match_operand:ALL4 0 “nonimmediate_operand” “=r,r ,r ,Qm ,!d,r”) (match_operand:ALL4 1 “nox_general_operand” “r,Y00,Qm,r Y00,i ,i”)) (clobber (reg:CC REG_CC))] “(register_operand (operands[0], mode) || reg_or_0_operand (operands[1], mode)) && reload_completed” { return output_movsisf (insn, operands, NULL); } [(set_attr “length” “4,4,8,9,4,10”) (set_attr “adjust_len” “mov32”)])

;; fffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff ;; move floating point numbers (32 bit)

(define_insn_and_split “*movsf_split” [(set (match_operand:SF 0 “nonimmediate_operand” “=r,r,r ,Qm,!d,r”) (match_operand:SF 1 “nox_general_operand” “r,G,Qm,rG,F ,F”))] “register_operand (operands[0], SFmode) || reg_or_0_operand (operands[1], SFmode)” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (match_dup 1)) (clobber (reg:CC REG_CC))])])

(define_insn “*movsf” [(set (match_operand:SF 0 “nonimmediate_operand” “=r,r,r ,Qm,!d,r”) (match_operand:SF 1 “nox_general_operand” “r,G,Qm,rG,F ,F”)) (clobber (reg:CC REG_CC))] “(register_operand (operands[0], SFmode) || reg_or_0_operand (operands[1], SFmode)) && reload_completed” { return output_movsisf (insn, operands, NULL); } [(set_attr “length” “4,4,8,9,4,10”) (set_attr “adjust_len” “mov32”)])

(define_peephole2 ; *reload_insf [(match_scratch:QI 2 “d”) (parallel [(set (match_operand:SF 0 “l_register_operand” "") (match_operand:SF 1 “const_double_operand” "")) (clobber (reg:CC REG_CC))]) (match_dup 2)] “operands[1] != CONST0_RTX (SFmode)” [(parallel [(set (match_dup 0) (match_dup 1)) (clobber (match_dup 2)) (clobber (reg:CC REG_CC))])])

;; ‘*’ because it is not used in rtl generation. (define_insn “*reload_insf” [(set (match_operand:SF 0 “register_operand” “=r”) (match_operand:SF 1 “const_double_operand” “F”)) (clobber (match_operand:QI 2 “register_operand” “=&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return output_reload_insisf (operands, operands[2], NULL); } [(set_attr “length” “8”) (set_attr “adjust_len” “reload_in32”)])

;;========================================================================= ;; move string (like memcpy)

(define_expand “cpymemhi” [(parallel [(set (match_operand:BLK 0 “memory_operand” "") (match_operand:BLK 1 “memory_operand” "")) (use (match_operand:HI 2 “const_int_operand” "")) (use (match_operand:HI 3 “const_int_operand” ""))])] "" { if (avr_emit_cpymemhi (operands)) DONE;

FAIL;

})

(define_mode_attr CPYMEM_r_d [(QI “r”) (HI “wd”)])

;; $0 : Address Space ;; $1, $2 : Loop register ;; R30 : source address ;; R26 : destination address

;; “cpymem_qi” ;; “cpymem_hi” (define_insn_and_split “cpymem_” [(set (mem:BLK (reg:HI REG_X)) (mem:BLK (reg:HI REG_Z))) (unspec [(match_operand:QI 0 “const_int_operand” “n”)] UNSPEC_CPYMEM) (use (match_operand:QIHI 1 “register_operand” “<CPYMEM_r_d>”)) (clobber (reg:HI REG_X)) (clobber (reg:HI REG_Z)) (clobber (reg:QI LPM_REGNO)) (clobber (match_operand:QIHI 2 “register_operand” “=1”))] "" “#” “&& reload_completed” [(parallel [(set (mem:BLK (reg:HI REG_X)) (mem:BLK (reg:HI REG_Z))) (unspec [(match_dup 0)] UNSPEC_CPYMEM) (use (match_dup 1)) (clobber (reg:HI REG_X)) (clobber (reg:HI REG_Z)) (clobber (reg:QI LPM_REGNO)) (clobber (match_dup 2)) (clobber (reg:CC REG_CC))])])

(define_insn “*cpymem_” [(set (mem:BLK (reg:HI REG_X)) (mem:BLK (reg:HI REG_Z))) (unspec [(match_operand:QI 0 “const_int_operand” “n”)] UNSPEC_CPYMEM) (use (match_operand:QIHI 1 “register_operand” “<CPYMEM_r_d>”)) (clobber (reg:HI REG_X)) (clobber (reg:HI REG_Z)) (clobber (reg:QI LPM_REGNO)) (clobber (match_operand:QIHI 2 “register_operand” “=1”)) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_cpymem (insn, operands, NULL); } [(set_attr “adjust_len” “cpymem”)])

;; $0 : Address Space ;; $1 : RAMPZ RAM address ;; R24 : #bytes and loop register ;; R23:Z : 24-bit source address ;; R26 : 16-bit destination address

;; “cpymemx_qi” ;; “cpymemx_hi”

(define_insn_and_split “cpymemx_” [(set (mem:BLK (reg:HI REG_X)) (mem:BLK (lo_sum:PSI (reg:QI 23) (reg:HI REG_Z)))) (unspec [(match_operand:QI 0 “const_int_operand” “n”)] UNSPEC_CPYMEM) (use (reg:QIHI 24)) (clobber (reg:HI REG_X)) (clobber (reg:HI REG_Z)) (clobber (reg:QI LPM_REGNO)) (clobber (reg:HI 24)) (clobber (reg:QI 23)) (clobber (mem:QI (match_operand:QI 1 “io_address_operand” “n”)))] "" “#” “&& reload_completed” [(parallel [(set (mem:BLK (reg:HI REG_X)) (mem:BLK (lo_sum:PSI (reg:QI 23) (reg:HI REG_Z)))) (unspec [(match_dup 0)] UNSPEC_CPYMEM) (use (reg:QIHI 24)) (clobber (reg:HI REG_X)) (clobber (reg:HI REG_Z)) (clobber (reg:QI LPM_REGNO)) (clobber (reg:HI 24)) (clobber (reg:QI 23)) (clobber (mem:QI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*cpymemx_” [(set (mem:BLK (reg:HI REG_X)) (mem:BLK (lo_sum:PSI (reg:QI 23) (reg:HI REG_Z)))) (unspec [(match_operand:QI 0 “const_int_operand” “n”)] UNSPEC_CPYMEM) (use (reg:QIHI 24)) (clobber (reg:HI REG_X)) (clobber (reg:HI REG_Z)) (clobber (reg:QI LPM_REGNO)) (clobber (reg:HI 24)) (clobber (reg:QI 23)) (clobber (mem:QI (match_operand:QI 1 “io_address_operand” “n”))) (clobber (reg:CC REG_CC))] “reload_completed” “%~call _movmemx” [(set_attr “type” “xcall”)])

;; =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 =%2 ;; memset (%0, %2, %1)

(define_expand “setmemhi” [(parallel [(set (match_operand:BLK 0 “memory_operand” "") (match_operand 2 “const_int_operand” "")) (use (match_operand:HI 1 “const_int_operand” "")) (use (match_operand:HI 3 “const_int_operand” "")) (clobber (match_scratch:HI 5 "")) (clobber (match_dup 4))])] "" { rtx addr0; machine_mode mode;

/* If value to set is not zero, use the library routine.  */
if (operands[2] != const0_rtx)
  FAIL;

if (!CONST_INT_P (operands[1]))
  FAIL;

mode = u8_operand (operands[1], VOIDmode) ? QImode : HImode;
operands[4] = gen_rtx_SCRATCH (mode);
operands[1] = copy_to_mode_reg (mode,
                                gen_int_mode (INTVAL (operands[1]), mode));
addr0 = copy_to_mode_reg (Pmode, XEXP (operands[0], 0));
operands[0] = gen_rtx_MEM (BLKmode, addr0);

})

(define_insn_and_split “*clrmemqi_split” [(set (mem:BLK (match_operand:HI 0 “register_operand” “e”)) (const_int 0)) (use (match_operand:QI 1 “register_operand” “r”)) (use (match_operand:QI 2 “const_int_operand” “n”)) (clobber (match_scratch:HI 3 “=0”)) (clobber (match_scratch:QI 4 “=&1”))] "" “#” “&& reload_completed” [(parallel [(set (mem:BLK (match_dup 0)) (const_int 0)) (use (match_dup 1)) (use (match_dup 2)) (clobber (match_dup 3)) (clobber (match_dup 4)) (clobber (reg:CC REG_CC))])])

(define_insn “*clrmemqi” [(set (mem:BLK (match_operand:HI 0 “register_operand” “e”)) (const_int 0)) (use (match_operand:QI 1 “register_operand” “r”)) (use (match_operand:QI 2 “const_int_operand” “n”)) (clobber (match_scratch:HI 3 “=0”)) (clobber (match_scratch:QI 4 “=&1”)) (clobber (reg:CC REG_CC))] “reload_completed” “0:;st %a0+,zero_reg;dec %1;brne 0b” [(set_attr “length” “3”)])

(define_insn_and_split “*clrmemhi_split” [(set (mem:BLK (match_operand:HI 0 “register_operand” “e,e”)) (const_int 0)) (use (match_operand:HI 1 “register_operand” “!w,d”)) (use (match_operand:HI 2 “const_int_operand” “n,n”)) (clobber (match_scratch:HI 3 “=0,0”)) (clobber (match_scratch:HI 4 “=&1,&1”))] "" “#” “&& reload_completed” [(parallel [(set (mem:BLK (match_dup 0)) (const_int 0)) (use (match_dup 1)) (use (match_dup 2)) (clobber (match_dup 3)) (clobber (match_dup 4)) (clobber (reg:CC REG_CC))])])

(define_insn “*clrmemhi” [(set (mem:BLK (match_operand:HI 0 “register_operand” “e,e”)) (const_int 0)) (use (match_operand:HI 1 “register_operand” “!w,d”)) (use (match_operand:HI 2 “const_int_operand” “n,n”)) (clobber (match_scratch:HI 3 “=0,0”)) (clobber (match_scratch:HI 4 “=&1,&1”)) (clobber (reg:CC REG_CC))] “reload_completed” “@ 0:;st %a0+,zero_reg;sbiw %A1,1;brne 0b 0:;st %a0+,zero_reg;subi %A1,1;sbci %B1,0;brne 0b” [(set_attr “length” “3,4”)])

(define_expand “strlenhi” [(set (match_dup 4) (unspec:HI [(match_operand:BLK 1 “memory_operand” "") (match_operand:QI 2 “const_int_operand” "") (match_operand:HI 3 “immediate_operand” "")] UNSPEC_STRLEN)) (set (match_dup 4) (plus:HI (match_dup 4) (const_int -1))) (parallel [(set (match_operand:HI 0 “register_operand” "") (minus:HI (match_dup 4) (match_dup 5))) (clobber (scratch:QI))])] "" { rtx addr; if (operands[2] != const0_rtx) FAIL; addr = copy_to_mode_reg (Pmode, XEXP (operands[1], 0)); operands[1] = gen_rtx_MEM (BLKmode, addr); operands[5] = addr; operands[4] = gen_reg_rtx (HImode); })

(define_insn_and_split “*strlenhi_split” [(set (match_operand:HI 0 “register_operand” “=e”) (unspec:HI [(mem:BLK (match_operand:HI 1 “register_operand” “0”)) (const_int 0) (match_operand:HI 2 “immediate_operand” “i”)] UNSPEC_STRLEN))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (unspec:HI [(mem:BLK (match_dup 1)) (const_int 0) (match_dup 2)] UNSPEC_STRLEN)) (clobber (reg:CC REG_CC))])])

(define_insn “*strlenhi” [(set (match_operand:HI 0 “register_operand” “=e”) (unspec:HI [(mem:BLK (match_operand:HI 1 “register_operand” “0”)) (const_int 0) (match_operand:HI 2 “immediate_operand” “i”)] UNSPEC_STRLEN)) (clobber (reg:CC REG_CC))] “reload_completed” “0:;ld tmp_reg,%a0+;tst tmp_reg;brne 0b” [(set_attr “length” “3”)])

;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ ; add bytes

;; “addqi3” ;; “addqq3” “adduqq3” (define_insn_and_split “add3” [(set (match_operand:ALL1 0 “register_operand” “=r,d ,r ,r ,r ,r”) (plus:ALL1 (match_operand:ALL1 1 “register_operand” “%0,0 ,0 ,0 ,0 ,0”) (match_operand:ALL1 2 “nonmemory_operand” “r,n Ynn,Y01,Ym1,Y02,Ym2”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:ALL1 (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*add3” [(set (match_operand:ALL1 0 “register_operand” “=r,d ,r ,r ,r ,r”) (plus:ALL1 (match_operand:ALL1 1 “register_operand” “%0,0 ,0 ,0 ,0 ,0”) (match_operand:ALL1 2 “nonmemory_operand” “r,n Ynn,Y01,Ym1,Y02,Ym2”))) (clobber (reg:CC REG_CC))] “reload_completed” “@ add %0,%2 subi %0,lo8(-(%2)) inc %0 dec %0 inc %0;inc %0 dec %0;dec %0” [(set_attr “length” “1,1,1,1,2,2”)])

;; “addhi3” ;; “addhq3” “adduhq3” ;; “addha3” “adduha3” (define_expand “add3” [(set (match_operand:ALL2 0 “register_operand” "") (plus:ALL2 (match_operand:ALL2 1 “register_operand” "") (match_operand:ALL2 2 “nonmemory_or_const_operand” "")))] "" { if (CONST_INT_P (operands[2])) { operands[2] = gen_int_mode (INTVAL (operands[2]), HImode);

    if (can_create_pseudo_p()
        && !stack_register_operand (operands[0], HImode)
        && !stack_register_operand (operands[1], HImode)
        && !d_register_operand (operands[0], HImode)
        && !d_register_operand (operands[1], HImode))
      {
        emit_insn (gen_addhi3_clobber (operands[0], operands[1], operands[2]));
        DONE;
      }
  }

if (CONST_FIXED_P (operands[2]))
  {
    emit_insn (gen_add<mode>3_clobber (operands[0], operands[1], operands[2]));
    DONE;
  }

})

(define_insn_and_split “*addhi3_zero_extend_split” [(set (match_operand:HI 0 “register_operand” “=r,*?r”) (plus:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “r ,0”)) (match_operand:HI 2 “register_operand” “0 ,r”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:HI (zero_extend:HI (match_dup 1)) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*addhi3_zero_extend” [(set (match_operand:HI 0 “register_operand” “=r,*?r”) (plus:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “r ,0”)) (match_operand:HI 2 “register_operand” “0 ,r”))) (clobber (reg:CC REG_CC))] “reload_completed” “@ add %A0,%1;adc %B0,zero_reg add %A0,%A2;mov %B0,%B2;adc %B0,zero_reg” [(set_attr “length” “2,3”)])

(define_insn_and_split “*addhi3_zero_extend1_split” [(set (match_operand:HI 0 “register_operand” “=r”) (plus:HI (match_operand:HI 1 “register_operand” “0”) (zero_extend:HI (match_operand:QI 2 “register_operand” “r”))))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:HI (match_dup 1) (zero_extend:HI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*addhi3_zero_extend1” [(set (match_operand:HI 0 “register_operand” “=r”) (plus:HI (match_operand:HI 1 “register_operand” “0”) (zero_extend:HI (match_operand:QI 2 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “reload_completed” “add %A0,%2;adc %B0,zero_reg” [(set_attr “length” “2”)])

(define_insn_and_split “*addhi3.sign_extend1_split” [(set (match_operand:HI 0 “register_operand” “=r”) (plus:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “r”)) (match_operand:HI 2 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:HI (sign_extend:HI (match_dup 1)) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*addhi3.sign_extend1” [(set (match_operand:HI 0 “register_operand” “=r”) (plus:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “r”)) (match_operand:HI 2 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” { return reg_overlap_mentioned_p (operands[0], operands[1]) ? “mov tmp_reg,%1;add %A0,%1;adc %B0,zero_reg;sbrc tmp_reg,7;dec %B0” : “add %A0,%1;adc %B0,zero_reg;sbrc %1,7;dec %B0”; } [(set_attr “length” “5”)])

(define_insn_and_split “*addhi3_zero_extend.const_split” [(set (match_operand:HI 0 “register_operand” “=d”) (plus:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “0”)) (match_operand:HI 2 “const_m255_to_m1_operand” “Cn8”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:HI (zero_extend:HI (match_dup 1)) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*addhi3_zero_extend.const” [(set (match_operand:HI 0 “register_operand” “=d”) (plus:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “0”)) (match_operand:HI 2 “const_m255_to_m1_operand” “Cn8”))) (clobber (reg:CC REG_CC))] “reload_completed” “subi %A0,%n2;sbc %B0,%B0” [(set_attr “length” “2”)])

(define_insn_and_split “*usum_widenqihi3_split” [(set (match_operand:HI 0 “register_operand” “=r”) (plus:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “0”)) (zero_extend:HI (match_operand:QI 2 “register_operand” “r”))))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:HI (zero_extend:HI (match_dup 1)) (zero_extend:HI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*usum_widenqihi3” [(set (match_operand:HI 0 “register_operand” “=r”) (plus:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “0”)) (zero_extend:HI (match_operand:QI 2 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “reload_completed” “add %A0,%2;clr %B0;rol %B0” [(set_attr “length” “3”)])

(define_insn_and_split “*udiff_widenqihi3_split” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “0”)) (zero_extend:HI (match_operand:QI 2 “register_operand” “r”))))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:HI (zero_extend:HI (match_dup 1)) (zero_extend:HI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*udiff_widenqihi3” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “0”)) (zero_extend:HI (match_operand:QI 2 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “reload_completed” “sub %A0,%2;sbc %B0,%B0” [(set_attr “length” “2”)])

(define_insn_and_split “*addhi3_sp” [(set (match_operand:HI 1 “stack_register_operand” “=q”) (plus:HI (match_operand:HI 2 “stack_register_operand” “q”) (match_operand:HI 0 “avr_sp_immediate_operand” “Csp”)))] "" { return avr_out_addto_sp (operands, NULL); } "" [(const_int 0)] { /* Do not attempt to split this pattern. This FAIL is necessary to prevent the splitter from matching *add3_split, splitting it, and then failing later because constraints don't match, as split does not look at constraints. */ FAIL; } [(set_attr “length” “6”) (set_attr “adjust_len” “addto_sp”)])

;; “*addhi3” ;; “*addhq3” “*adduhq3” ;; “*addha3” “*adduha3” (define_insn_and_split “*add3_split” [(set (match_operand:ALL2 0 “register_operand” “=??r,d,!w ,d”) (plus:ALL2 (match_operand:ALL2 1 “register_operand” “%0,0,0 ,0”) (match_operand:ALL2 2 “nonmemory_or_const_operand” “r,s,IJ YIJ,n Ynn”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:ALL2 (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*add3” [(set (match_operand:ALL2 0 “register_operand” “=??r,d,!w ,d”) (plus:ALL2 (match_operand:ALL2 1 “register_operand” “%0,0,0 ,0”) (match_operand:ALL2 2 “nonmemory_or_const_operand” “r,s,IJ YIJ,n Ynn”))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_plus (insn, operands); } [(set_attr “length” “2”) (set_attr “adjust_len” “plus”)])

;; Adding a constant to NO_LD_REGS might have lead to a reload of ;; that constant to LD_REGS. We don't add a scratch to *addhi3 ;; itself because that insn is special to reload.

(define_peephole2 ; addhi3_clobber [(parallel [(set (match_operand:ALL2 0 “d_register_operand” "") (match_operand:ALL2 1 “const_operand” "")) (clobber (reg:CC REG_CC))]) (parallel [(set (match_operand:ALL2 2 “l_register_operand” "") (plus:ALL2 (match_dup 2) (match_dup 0))) (clobber (reg:CC REG_CC))])] “peep2_reg_dead_p (2, operands[0])” [(parallel [(set (match_dup 2) (plus:ALL2 (match_dup 2) (match_dup 1))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])] { operands[3] = simplify_gen_subreg (QImode, operands[0], mode, 0); })

;; Same, but with reload to NO_LD_REGS ;; Combine *reload_inhi with *addhi3

(define_peephole2 ; addhi3_clobber [(parallel [(set (match_operand:ALL2 0 “l_register_operand” "") (match_operand:ALL2 1 “const_operand” "")) (clobber (match_operand:QI 2 “d_register_operand” "")) (clobber (reg:CC REG_CC))]) (parallel [(set (match_operand:ALL2 3 “l_register_operand” "") (plus:ALL2 (match_dup 3) (match_dup 0))) (clobber (reg:CC REG_CC))])] “peep2_reg_dead_p (2, operands[0])” [(parallel [(set (match_dup 3) (plus:ALL2 (match_dup 3) (match_dup 1))) (clobber (match_dup 2)) (clobber (reg:CC REG_CC))])])

;; “addhi3_clobber” ;; “addhq3_clobber” “adduhq3_clobber” ;; “addha3_clobber” “adduha3_clobber” (define_insn_and_split “add3_clobber” [(set (match_operand:ALL2 0 “register_operand” “=!w ,d ,r”) (plus:ALL2 (match_operand:ALL2 1 “register_operand” “%0 ,0 ,0”) (match_operand:ALL2 2 “const_operand” “IJ YIJ,n Ynn,n Ynn”))) (clobber (match_scratch:QI 3 “=X ,X ,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:ALL2 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*add3_clobber” [(set (match_operand:ALL2 0 “register_operand” “=!w ,d ,r”) (plus:ALL2 (match_operand:ALL2 1 “register_operand” “%0 ,0 ,0”) (match_operand:ALL2 2 “const_operand” “IJ YIJ,n Ynn,n Ynn”))) (clobber (match_scratch:QI 3 “=X ,X ,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_plus (insn, operands); } [(set_attr “length” “4”) (set_attr “adjust_len” “plus”)])

;; “addsi3” ;; “addsq3” “addusq3” ;; “addsa3” “addusa3” (define_insn_and_split “add3” [(set (match_operand:ALL4 0 “register_operand” “=??r,d ,r”) (plus:ALL4 (match_operand:ALL4 1 “register_operand” “%0,0 ,0”) (match_operand:ALL4 2 “nonmemory_operand” “r,i ,n Ynn”))) (clobber (match_scratch:QI 3 “=X,X ,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:ALL4 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*add3” [(set (match_operand:ALL4 0 “register_operand” “=??r,d ,r”) (plus:ALL4 (match_operand:ALL4 1 “register_operand” “%0,0 ,0”) (match_operand:ALL4 2 “nonmemory_operand” “r,i ,n Ynn”))) (clobber (match_scratch:QI 3 “=X,X ,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_plus (insn, operands); } [(set_attr “length” “4”) (set_attr “adjust_len” “plus”)])

(define_insn_and_split “*addpsi3_zero_extend.qi_split” [(set (match_operand:PSI 0 “register_operand” “=r”) (plus:PSI (zero_extend:PSI (match_operand:QI 1 “register_operand” “r”)) (match_operand:PSI 2 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:PSI (zero_extend:PSI (match_dup 1)) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*addpsi3_zero_extend.qi” [(set (match_operand:PSI 0 “register_operand” “=r”) (plus:PSI (zero_extend:PSI (match_operand:QI 1 “register_operand” “r”)) (match_operand:PSI 2 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “add %A0,%A1;adc %B0,zero_reg;adc %C0,zero_reg” [(set_attr “length” “3”)])

(define_insn_and_split “*addpsi3_zero_extend.hi_split” [(set (match_operand:PSI 0 “register_operand” “=r”) (plus:PSI (zero_extend:PSI (match_operand:HI 1 “register_operand” “r”)) (match_operand:PSI 2 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:PSI (zero_extend:PSI (match_dup 1)) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*addpsi3_zero_extend.hi” [(set (match_operand:PSI 0 “register_operand” “=r”) (plus:PSI (zero_extend:PSI (match_operand:HI 1 “register_operand” “r”)) (match_operand:PSI 2 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “add %A0,%A1;adc %B0,%B1;adc %C0,zero_reg” [(set_attr “length” “3”)])

(define_insn_and_split “*addpsi3_sign_extend.hi_split” [(set (match_operand:PSI 0 “register_operand” “=r”) (plus:PSI (sign_extend:PSI (match_operand:HI 1 “register_operand” “r”)) (match_operand:PSI 2 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:PSI (sign_extend:PSI (match_dup 1)) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*addpsi3_sign_extend.hi” [(set (match_operand:PSI 0 “register_operand” “=r”) (plus:PSI (sign_extend:PSI (match_operand:HI 1 “register_operand” “r”)) (match_operand:PSI 2 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “add %A0,%1;adc %B0,%B1;adc %C0,zero_reg;sbrc %B1,7;dec %C0” [(set_attr “length” “5”)])

(define_insn_and_split “*addsi3_zero_extend_split” [(set (match_operand:SI 0 “register_operand” “=r”) (plus:SI (zero_extend:SI (match_operand:QI 1 “register_operand” “r”)) (match_operand:SI 2 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:SI (zero_extend:SI (match_dup 1)) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*addsi3_zero_extend” [(set (match_operand:SI 0 “register_operand” “=r”) (plus:SI (zero_extend:SI (match_operand:QI 1 “register_operand” “r”)) (match_operand:SI 2 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “add %A0,%1;adc %B0,zero_reg;adc %C0,zero_reg;adc %D0,zero_reg” [(set_attr “length” “4”)])

(define_insn_and_split “*addsi3_zero_extend.hi_split” [(set (match_operand:SI 0 “register_operand” “=r”) (plus:SI (zero_extend:SI (match_operand:HI 1 “register_operand” “r”)) (match_operand:SI 2 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:SI (zero_extend:SI (match_dup 1)) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*addsi3_zero_extend.hi” [(set (match_operand:SI 0 “register_operand” “=r”) (plus:SI (zero_extend:SI (match_operand:HI 1 “register_operand” “r”)) (match_operand:SI 2 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “add %A0,%1;adc %B0,%B1;adc %C0,zero_reg;adc %D0,zero_reg” [(set_attr “length” “4”)])

(define_insn_and_split “addpsi3” [(set (match_operand:PSI 0 “register_operand” “=??r,d ,d,r”) (plus:PSI (match_operand:PSI 1 “register_operand” “%0,0 ,0,0”) (match_operand:PSI 2 “nonmemory_operand” “r,s ,n,n”))) (clobber (match_scratch:QI 3 “=X,X ,X,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:PSI (match_dup 1) (match_dup 2))) (clobber (match_dup 3 )) (clobber (reg:CC REG_CC))])])

(define_insn “*addpsi3” [(set (match_operand:PSI 0 “register_operand” “=??r,d ,d,r”) (plus:PSI (match_operand:PSI 1 “register_operand” “%0,0 ,0,0”) (match_operand:PSI 2 “nonmemory_operand” “r,s ,n,n”))) (clobber (match_scratch:QI 3 “=X,X ,X,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_plus (insn, operands); } [(set_attr “length” “3”) (set_attr “adjust_len” “plus”)])

(define_insn_and_split “subpsi3” [(set (match_operand:PSI 0 “register_operand” “=r”) (minus:PSI (match_operand:PSI 1 “register_operand” “0”) (match_operand:PSI 2 “register_operand” “r”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:PSI (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*subpsi3” [(set (match_operand:PSI 0 “register_operand” “=r”) (minus:PSI (match_operand:PSI 1 “register_operand” “0”) (match_operand:PSI 2 “register_operand” “r”))) (clobber (reg:CC REG_CC))] “reload_completed” “sub %0,%2;sbc %B0,%B2;sbc %C0,%C2” [(set_attr “length” “3”)])

(define_insn_and_split “*subpsi3_zero_extend.qi_split” [(set (match_operand:PSI 0 “register_operand” “=r”) (minus:PSI (match_operand:SI 1 “register_operand” “0”) (zero_extend:PSI (match_operand:QI 2 “register_operand” “r”))))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:PSI (match_dup 1) (zero_extend:PSI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*subpsi3_zero_extend.qi” [(set (match_operand:PSI 0 “register_operand” “=r”) (minus:PSI (match_operand:SI 1 “register_operand” “0”) (zero_extend:PSI (match_operand:QI 2 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “reload_completed” “sub %A0,%2;sbc %B0,zero_reg;sbc %C0,zero_reg” [(set_attr “length” “3”)])

(define_insn_and_split “*subpsi3_zero_extend.hi_split” [(set (match_operand:PSI 0 “register_operand” “=r”) (minus:PSI (match_operand:PSI 1 “register_operand” “0”) (zero_extend:PSI (match_operand:HI 2 “register_operand” “r”))))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:PSI (match_dup 1) (zero_extend:PSI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*subpsi3_zero_extend.hi” [(set (match_operand:PSI 0 “register_operand” “=r”) (minus:PSI (match_operand:PSI 1 “register_operand” “0”) (zero_extend:PSI (match_operand:HI 2 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “reload_completed” “sub %A0,%2;sbc %B0,%B2;sbc %C0,zero_reg” [(set_attr “length” “3”)])

(define_insn_and_split “*subpsi3_sign_extend.hi_split” [(set (match_operand:PSI 0 “register_operand” “=r”) (minus:PSI (match_operand:PSI 1 “register_operand” “0”) (sign_extend:PSI (match_operand:HI 2 “register_operand” “r”))))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:PSI (match_dup 1) (sign_extend:PSI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*subpsi3_sign_extend.hi” [(set (match_operand:PSI 0 “register_operand” “=r”) (minus:PSI (match_operand:PSI 1 “register_operand” “0”) (sign_extend:PSI (match_operand:HI 2 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “reload_completed” “sub %A0,%A2;sbc %B0,%B2;sbc %C0,zero_reg;sbrc %B2,7;inc %C0” [(set_attr “length” “5”)])

;----------------------------------------------------------------------------- ; sub bytes

;; “subqi3” ;; “subqq3” “subuqq3” (define_insn_and_split “sub3” [(set (match_operand:ALL1 0 “register_operand” “=??r,d ,r ,r ,r ,r”) (minus:ALL1 (match_operand:ALL1 1 “register_operand” “0,0 ,0 ,0 ,0 ,0”) (match_operand:ALL1 2 “nonmemory_or_const_operand” “r,n Ynn,Y01,Ym1,Y02,Ym2”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:ALL1 (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*sub3” [(set (match_operand:ALL1 0 “register_operand” “=??r,d ,r ,r ,r ,r”) (minus:ALL1 (match_operand:ALL1 1 “register_operand” “0,0 ,0 ,0 ,0 ,0”) (match_operand:ALL1 2 “nonmemory_or_const_operand” “r,n Ynn,Y01,Ym1,Y02,Ym2”))) (clobber (reg:CC REG_CC))] “reload_completed” “@ sub %0,%2 subi %0,lo8(%2) dec %0 inc %0 dec %0;dec %0 inc %0;inc %0” [(set_attr “length” “1,1,1,1,2,2”)])

;; “subhi3” ;; “subhq3” “subuhq3” ;; “subha3” “subuha3” (define_insn_and_split “sub3” [(set (match_operand:ALL2 0 “register_operand” “=??r,d ,*r”) (minus:ALL2 (match_operand:ALL2 1 “register_operand” “0,0 ,0”) (match_operand:ALL2 2 “nonmemory_or_const_operand” “r,i Ynn,Ynn”))) (clobber (match_scratch:QI 3 “=X,X ,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:ALL2 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*sub3” [(set (match_operand:ALL2 0 “register_operand” “=??r,d ,*r”) (minus:ALL2 (match_operand:ALL2 1 “register_operand” “0,0 ,0”) (match_operand:ALL2 2 “nonmemory_or_const_operand” “r,i Ynn,Ynn”))) (clobber (match_scratch:QI 3 “=X,X ,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_plus (insn, operands); } [(set_attr “adjust_len” “plus”)])

(define_insn_and_split “*subhi3_zero_extend1_split” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (match_operand:HI 1 “register_operand” “0”) (zero_extend:HI (match_operand:QI 2 “register_operand” “r”))))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:HI (match_dup 1) (zero_extend:HI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*subhi3_zero_extend1” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (match_operand:HI 1 “register_operand” “0”) (zero_extend:HI (match_operand:QI 2 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “reload_completed” “sub %A0,%2;sbc %B0,zero_reg” [(set_attr “length” “2”)])

(define_insn_and_split “*subhi3.sign_extend2_split” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (match_operand:HI 1 “register_operand” “0”) (sign_extend:HI (match_operand:QI 2 “register_operand” “r”))))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:HI (match_dup 1) (sign_extend:HI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*subhi3.sign_extend2” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (match_operand:HI 1 “register_operand” “0”) (sign_extend:HI (match_operand:QI 2 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “reload_completed” { return reg_overlap_mentioned_p (operands[0], operands[2]) ? “mov tmp_reg,%2;sub %A0,%2;sbc %B0,zero_reg;sbrc tmp_reg,7;inc %B0” : “sub %A0,%2;sbc %B0,zero_reg;sbrc %2,7;inc %B0”; } [(set_attr “length” “5”)])

;; “subsi3” ;; “subsq3” “subusq3” ;; “subsa3” “subusa3” (define_insn_and_split “sub3” [(set (match_operand:ALL4 0 “register_operand” “=??r,d ,r”) (minus:ALL4 (match_operand:ALL4 1 “register_operand” “0,0 ,0”) (match_operand:ALL4 2 “nonmemory_or_const_operand” “r,n Ynn,Ynn”))) (clobber (match_scratch:QI 3 “=X,X ,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:ALL4 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*sub3” [(set (match_operand:ALL4 0 “register_operand” “=??r,d ,r”) (minus:ALL4 (match_operand:ALL4 1 “register_operand” “0,0 ,0”) (match_operand:ALL4 2 “nonmemory_or_const_operand” “r,n Ynn,Ynn”))) (clobber (match_scratch:QI 3 “=X,X ,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_plus (insn, operands); } [(set_attr “adjust_len” “plus”)])

(define_insn_and_split “*subsi3_zero_extend_split” [(set (match_operand:SI 0 “register_operand” “=r”) (minus:SI (match_operand:SI 1 “register_operand” “0”) (zero_extend:SI (match_operand:QI 2 “register_operand” “r”))))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:SI (match_dup 1) (zero_extend:SI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*subsi3_zero_extend” [(set (match_operand:SI 0 “register_operand” “=r”) (minus:SI (match_operand:SI 1 “register_operand” “0”) (zero_extend:SI (match_operand:QI 2 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “reload_completed” “sub %A0,%2;sbc %B0,zero_reg;sbc %C0,zero_reg;sbc %D0,zero_reg” [(set_attr “length” “4”) ])

(define_insn_and_split “*subsi3_zero_extend.hi_split” [(set (match_operand:SI 0 “register_operand” “=r”) (minus:SI (match_operand:SI 1 “register_operand” “0”) (zero_extend:SI (match_operand:HI 2 “register_operand” “r”))))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:SI (match_dup 1) (zero_extend:SI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*subsi3_zero_extend.hi” [(set (match_operand:SI 0 “register_operand” “=r”) (minus:SI (match_operand:SI 1 “register_operand” “0”) (zero_extend:SI (match_operand:HI 2 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “reload_completed” “sub %A0,%2;sbc %B0,%B2;sbc %C0,zero_reg;sbc %D0,zero_reg” [(set_attr “length” “4”)])

;****************************************************************************** ; mul

(define_expand “mulqi3” [(set (match_operand:QI 0 “register_operand” "") (mult:QI (match_operand:QI 1 “register_operand” "") (match_operand:QI 2 “register_operand” "")))] "" { if (!AVR_HAVE_MUL) { emit_insn (gen_mulqi3_call (operands[0], operands[1], operands[2])); DONE; } })

(define_insn_and_split “*mulqi3_enh_split” [(set (match_operand:QI 0 “register_operand” “=r”) (mult:QI (match_operand:QI 1 “register_operand” “r”) (match_operand:QI 2 “register_operand” “r”)))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (mult:QI (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*mulqi3_enh” [(set (match_operand:QI 0 “register_operand” “=r”) (mult:QI (match_operand:QI 1 “register_operand” “r”) (match_operand:QI 2 “register_operand” “r”))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mul %1,%2 mov %0,r0 clr r1” [(set_attr “length” “3”)])

(define_expand “mulqi3_call” [(set (reg:QI 24) (match_operand:QI 1 “register_operand” "")) (set (reg:QI 22) (match_operand:QI 2 “register_operand” "")) (parallel [(set (reg:QI 24) (mult:QI (reg:QI 24) (reg:QI 22))) (clobber (reg:QI 22))]) (set (match_operand:QI 0 “register_operand” "") (reg:QI 24))] "" { avr_fix_inputs (operands, 1 << 2, regmask (QImode, 24)); })

(define_insn_and_split “*mulqi3_call_split” [(set (reg:QI 24) (mult:QI (reg:QI 24) (reg:QI 22))) (clobber (reg:QI 22))] “!AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:QI 24) (mult:QI (reg:QI 24) (reg:QI 22))) (clobber (reg:QI 22)) (clobber (reg:CC REG_CC))])])

(define_insn “*mulqi3_call” [(set (reg:QI 24) (mult:QI (reg:QI 24) (reg:QI 22))) (clobber (reg:QI 22)) (clobber (reg:CC REG_CC))] “!AVR_HAVE_MUL && reload_completed” “%~call __mulqi3” [(set_attr “type” “xcall”)])

;; “umulqi3_highpart” ;; “smulqi3_highpart”

(define_insn_and_split “<extend_su>mulqi3_highpart” [(set (match_operand:QI 0 “register_operand” “=r”) (truncate:QI (lshiftrt:HI (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “<mul_r_d>”)) (any_extend:HI (match_operand:QI 2 “register_operand” “<mul_r_d>”))) (const_int 8))))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (truncate:QI (lshiftrt:HI (mult:HI (any_extend:HI (match_dup 1)) (any_extend:HI (match_dup 2))) (const_int 8)))) (clobber (reg:CC REG_CC))])])

(define_insn “*<extend_su>mulqi3_highpart” [(set (match_operand:QI 0 “register_operand” “=r”) (truncate:QI (lshiftrt:HI (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “<mul_r_d>”)) (any_extend:HI (match_operand:QI 2 “register_operand” “<mul_r_d>”))) (const_int 8)))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mul<extend_s> %1,%2 mov %0,r1 clr zero_reg” [(set_attr “length” “3”)])

;; Used when expanding div or mod inline for some special values (define_insn_and_split “*subqi3.ashiftrt7_split” [(set (match_operand:QI 0 “register_operand” “=r”) (minus:QI (match_operand:QI 1 “register_operand” “0”) (ashiftrt:QI (match_operand:QI 2 “register_operand” “r”) (const_int 7))))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:QI (match_dup 1) (ashiftrt:QI (match_dup 2) (const_int 7)))) (clobber (reg:CC REG_CC))])])

(define_insn “*subqi3.ashiftrt7” [(set (match_operand:QI 0 “register_operand” “=r”) (minus:QI (match_operand:QI 1 “register_operand” “0”) (ashiftrt:QI (match_operand:QI 2 “register_operand” “r”) (const_int 7)))) (clobber (reg:CC REG_CC))] “reload_completed” “sbrc %2,7;inc %0” [(set_attr “length” “2”)])

(define_insn_and_split “*addqi3.lt0_split” [(set (match_operand:QI 0 “register_operand” “=r”) (plus:QI (lt:QI (match_operand:QI 1 “register_operand” “r”) (const_int 0)) (match_operand:QI 2 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:QI (lt:QI (match_dup 1) (const_int 0)) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*addqi3.lt0” [(set (match_operand:QI 0 “register_operand” “=r”) (plus:QI (lt:QI (match_operand:QI 1 “register_operand” “r”) (const_int 0)) (match_operand:QI 2 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “sbrc %1,7;inc %0” [(set_attr “length” “2”)])

(define_insn_and_split “*addhi3.lt0_split” [(set (match_operand:HI 0 “register_operand” “=w,r”) (plus:HI (lt:HI (match_operand:QI 1 “register_operand” “r,r”) (const_int 0)) (match_operand:HI 2 “register_operand” “0,0”))) (clobber (match_scratch:QI 3 “=X,&1”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:HI (lt:HI (match_dup 1) (const_int 0)) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*addhi3.lt0” [(set (match_operand:HI 0 “register_operand” “=w,r”) (plus:HI (lt:HI (match_operand:QI 1 “register_operand” “r,r”) (const_int 0)) (match_operand:HI 2 “register_operand” “0,0”))) (clobber (match_scratch:QI 3 “=X,&1”)) (clobber (reg:CC REG_CC))] “reload_completed” “@ sbrc %1,7;adiw %0,1 lsl %1;adc %A0,zero_reg;adc %B0,zero_reg” [(set_attr “length” “2,3”)])

(define_insn_and_split “*addpsi3.lt0_split” [(set (match_operand:PSI 0 “register_operand” “=r”) (plus:PSI (lshiftrt:PSI (match_operand:PSI 1 “register_operand” “r”) (const_int 23)) (match_operand:PSI 2 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:PSI (lshiftrt:PSI (match_dup 1) (const_int 23)) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*addpsi3.lt0” [(set (match_operand:PSI 0 “register_operand” “=r”) (plus:PSI (lshiftrt:PSI (match_operand:PSI 1 “register_operand” “r”) (const_int 23)) (match_operand:PSI 2 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “mov tmp_reg,%C1;lsl tmp_reg adc %A0,zero_reg;adc %B0,zero_reg;adc %C0,zero_reg” [(set_attr “length” “5”)])

(define_insn_and_split “*addsi3.lt0_split” [(set (match_operand:SI 0 “register_operand” “=r”) (plus:SI (lshiftrt:SI (match_operand:SI 1 “register_operand” “r”) (const_int 31)) (match_operand:SI 2 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:SI (lshiftrt:SI (match_dup 1) (const_int 31)) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*addsi3.lt0” [(set (match_operand:SI 0 “register_operand” “=r”) (plus:SI (lshiftrt:SI (match_operand:SI 1 “register_operand” “r”) (const_int 31)) (match_operand:SI 2 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “mov tmp_reg,%D1;lsl tmp_reg adc %A0,zero_reg;adc %B0,zero_reg;adc %C0,zero_reg;adc %D0,zero_reg” [(set_attr “length” “6”)])

(define_insn_and_split “*umulqihi3.call_split” [(set (reg:HI 24) (mult:HI (zero_extend:HI (reg:QI 22)) (zero_extend:HI (reg:QI 24)))) (clobber (reg:QI 21)) (clobber (reg:HI 22))] “!AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (mult:HI (zero_extend:HI (reg:QI 22)) (zero_extend:HI (reg:QI 24)))) (clobber (reg:QI 21)) (clobber (reg:HI 22)) (clobber (reg:CC REG_CC))])])

(define_insn “*umulqihi3.call” [(set (reg:HI 24) (mult:HI (zero_extend:HI (reg:QI 22)) (zero_extend:HI (reg:QI 24)))) (clobber (reg:QI 21)) (clobber (reg:HI 22)) (clobber (reg:CC REG_CC))] “!AVR_HAVE_MUL && reload_completed” “%~call __umulqihi3” [(set_attr “type” “xcall”)])

;; “umulqihi3” ;; “mulqihi3”

(define_insn_and_split “<extend_u>mulqihi3_split” [(set (match_operand:HI 0 “register_operand” “=r”) (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “<mul_r_d>”)) (any_extend:HI (match_operand:QI 2 “register_operand” “<mul_r_d>”))))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (mult:HI (any_extend:HI (match_dup 1)) (any_extend:HI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “<extend_u>mulqihi3” [(set (match_operand:HI 0 “register_operand” “=r”) (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “<mul_r_d>”)) (any_extend:HI (match_operand:QI 2 “register_operand” “<mul_r_d>”)))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mul<extend_s> %1,%2 movw %0,r0 clr zero_reg” [(set_attr “length” “3”)])

(define_insn_and_split “usmulqihi3” [(set (match_operand:HI 0 “register_operand” “=r”) (mult:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “a”)) (sign_extend:HI (match_operand:QI 2 “register_operand” “a”))))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (mult:HI (zero_extend:HI (match_dup 1)) (sign_extend:HI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*usmulqihi3” [(set (match_operand:HI 0 “register_operand” “=r”) (mult:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “a”)) (sign_extend:HI (match_operand:QI 2 “register_operand” “a”)))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mulsu %2,%1 movw %0,r0 clr zero_reg” [(set_attr “length” “3”)])

;; Above insn is not canonicalized by insn combine, so here is a version with ;; operands swapped. (define_insn_and_split “*sumulqihi3_split” [(set (match_operand:HI 0 “register_operand” “=r”) (mult:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “a”)) (zero_extend:HI (match_operand:QI 2 “register_operand” “a”))))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (mult:HI (sign_extend:HI (match_dup 1)) (zero_extend:HI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*sumulqihi3” [(set (match_operand:HI 0 “register_operand” “=r”) (mult:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “a”)) (zero_extend:HI (match_operand:QI 2 “register_operand” “a”)))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mulsu %1,%2 movw %0,r0 clr zero_reg” [(set_attr “length” “3”)])

;; One-extend operand 1

(define_insn_and_split “*osmulqihi3_split” [(set (match_operand:HI 0 “register_operand” “=&r”) (mult:HI (not:HI (zero_extend:HI (not:QI (match_operand:QI 1 “register_operand” “a”)))) (sign_extend:HI (match_operand:QI 2 “register_operand” “a”))))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (mult:HI (not:HI (zero_extend:HI (not:QI (match_dup 1)))) (sign_extend:HI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*osmulqihi3” [(set (match_operand:HI 0 “register_operand” “=&r”) (mult:HI (not:HI (zero_extend:HI (not:QI (match_operand:QI 1 “register_operand” “a”)))) (sign_extend:HI (match_operand:QI 2 “register_operand” “a”)))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mulsu %2,%1 movw %0,r0 sub %B0,%2 clr zero_reg” [(set_attr “length” “4”)])

(define_insn_and_split “*oumulqihi3_split” [(set (match_operand:HI 0 “register_operand” “=&r”) (mult:HI (not:HI (zero_extend:HI (not:QI (match_operand:QI 1 “register_operand” “r”)))) (zero_extend:HI (match_operand:QI 2 “register_operand” “r”))))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (mult:HI (not:HI (zero_extend:HI (not:QI (match_dup 1)))) (zero_extend:HI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*oumulqihi3” [(set (match_operand:HI 0 “register_operand” “=&r”) (mult:HI (not:HI (zero_extend:HI (not:QI (match_operand:QI 1 “register_operand” “r”)))) (zero_extend:HI (match_operand:QI 2 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mul %2,%1 movw %0,r0 sub %B0,%2 clr zero_reg” [(set_attr “length” “4”)])

;****************************************************************************** ; multiply-add/sub QI: $0 = $3 +/- $1*$2 ;******************************************************************************

(define_insn_and_split “*maddqi4_split” [(set (match_operand:QI 0 “register_operand” “=r”) (plus:QI (mult:QI (match_operand:QI 1 “register_operand” “r”) (match_operand:QI 2 “register_operand” “r”)) (match_operand:QI 3 “register_operand” “0”)))]

“AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:QI (mult:QI (match_dup 1) (match_dup 2)) (match_dup 3))) (clobber (reg:CC REG_CC))])])

(define_insn “*maddqi4” [(set (match_operand:QI 0 “register_operand” “=r”) (plus:QI (mult:QI (match_operand:QI 1 “register_operand” “r”) (match_operand:QI 2 “register_operand” “r”)) (match_operand:QI 3 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mul %1,%2 add %A0,r0 clr zero_reg” [(set_attr “length” “4”)])

(define_insn_and_split “*msubqi4_split” [(set (match_operand:QI 0 “register_operand” “=r”) (minus:QI (match_operand:QI 3 “register_operand” “0”) (mult:QI (match_operand:QI 1 “register_operand” “r”) (match_operand:QI 2 “register_operand” “r”))))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:QI (match_dup 3) (mult:QI (match_dup 1) (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*msubqi4” [(set (match_operand:QI 0 “register_operand” “=r”) (minus:QI (match_operand:QI 3 “register_operand” “0”) (mult:QI (match_operand:QI 1 “register_operand” “r”) (match_operand:QI 2 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mul %1,%2 sub %A0,r0 clr zero_reg” [(set_attr “length” “4”)])

(define_insn_and_split “*maddqi4.const” [(set (match_operand:QI 0 “register_operand” “=r”) (plus:QI (mult:QI (match_operand:QI 1 “register_operand” “r”) (match_operand:QI 2 “const_int_operand” “n”)) (match_operand:QI 3 “register_operand” “0”))) (clobber (match_scratch:QI 4 “=&d”))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(set (match_dup 4) (match_dup 2)) ; *maddqi4 (set (match_dup 0) (plus:QI (mult:QI (match_dup 1) (match_dup 4)) (match_dup 3)))])

(define_insn_and_split “*msubqi4.const” [(set (match_operand:QI 0 “register_operand” “=r”) (minus:QI (match_operand:QI 3 “register_operand” “0”) (mult:QI (match_operand:QI 1 “register_operand” “r”) (match_operand:QI 2 “const_int_operand” “n”)))) (clobber (match_scratch:QI 4 “=&d”))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(set (match_dup 4) (match_dup 2)) ; *msubqi4 (set (match_dup 0) (minus:QI (match_dup 3) (mult:QI (match_dup 1) (match_dup 4))))])

;****************************************************************************** ; multiply-add/sub HI: $0 = $3 +/- $1*$2 with 8-bit values $1, $2 ;******************************************************************************

;; We don‘t use standard insns/expanders as they lead to cumbersome code for, ;; e.g, ;; ;; int foo (unsigned char z) ;; { ;; extern int aInt[]; ;; return aInt[3*z+2]; ;; } ;; ;; because the constant +4 then is added explicitely instead of consuming it ;; with the aInt symbol. Therefore, we rely on insn combine which takes costs ;; into account more accurately and doesn’t do burte-force multiply-add/sub. ;; The implementational effort is the same so we are fine with that approach.

;; “*maddqihi4” ;; “*umaddqihi4” (define_insn_and_split “*<extend_u>maddqihi4_split” [(set (match_operand:HI 0 “register_operand” “=r”) (plus:HI (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “<mul_r_d>”)) (any_extend:HI (match_operand:QI 2 “register_operand” “<mul_r_d>”))) (match_operand:HI 3 “register_operand” “0”)))]

“AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:HI (mult:HI (any_extend:HI (match_dup 1)) (any_extend:HI (match_dup 2))) (match_dup 3))) (clobber (reg:CC REG_CC))])])

(define_insn “*<extend_u>maddqihi4” [(set (match_operand:HI 0 “register_operand” “=r”) (plus:HI (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “<mul_r_d>”)) (any_extend:HI (match_operand:QI 2 “register_operand” “<mul_r_d>”))) (match_operand:HI 3 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mul<extend_s> %1,%2 add %A0,r0 adc %B0,r1 clr zero_reg” [(set_attr “length” “4”)])

;; “*msubqihi4” ;; “*umsubqihi4” (define_insn_and_split “*<extend_u>msubqihi4_split” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (match_operand:HI 3 “register_operand” “0”) (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “<mul_r_d>”)) (any_extend:HI (match_operand:QI 2 “register_operand” “<mul_r_d>”)))))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:HI (match_dup 3) (mult:HI (any_extend:HI (match_dup 1)) (any_extend:HI (match_dup 2))))) (clobber (reg:CC REG_CC))])])

(define_insn “*<extend_u>msubqihi4” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (match_operand:HI 3 “register_operand” “0”) (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “<mul_r_d>”)) (any_extend:HI (match_operand:QI 2 “register_operand” “<mul_r_d>”))))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mul<extend_s> %1,%2 sub %A0,r0 sbc %B0,r1 clr zero_reg” [(set_attr “length” “4”)])

;; “*usmaddqihi4” ;; “*sumaddqihi4” (define_insn_and_split “*<any_extend:extend_su><any_extend2:extend_su>msubqihi4_split” [(set (match_operand:HI 0 “register_operand” “=r”) (plus:HI (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “a”)) (any_extend2:HI (match_operand:QI 2 “register_operand” “a”))) (match_operand:HI 3 “register_operand” “0”)))] “AVR_HAVE_MUL && reload_completed && <any_extend:CODE> != <any_extend2:CODE>” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (plus:HI (mult:HI (any_extend:HI (match_dup 1)) (any_extend2:HI (match_dup 2))) (match_dup 3))) (clobber (reg:CC REG_CC))])])

(define_insn “*<any_extend:extend_su><any_extend2:extend_su>msubqihi4” [(set (match_operand:HI 0 “register_operand” “=r”) (plus:HI (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “a”)) (any_extend2:HI (match_operand:QI 2 “register_operand” “a”))) (match_operand:HI 3 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed && <any_extend:CODE> != <any_extend2:CODE>” { output_asm_insn (<any_extend:CODE> == SIGN_EXTEND ? “mulsu %1,%2” : “mulsu %2,%1”, operands);

return "add %A0,r0\;adc %B0,r1\;clr __zero_reg__";

} [(set_attr “length” “4”)])

;; “*usmsubqihi4” ;; “*sumsubqihi4” (define_insn_and_split “*<any_extend:extend_su><any_extend2:extend_su>msubqihi4_split” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (match_operand:HI 3 “register_operand” “0”) (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “a”)) (any_extend2:HI (match_operand:QI 2 “register_operand” “a”)))))] “AVR_HAVE_MUL && reload_completed && <any_extend:CODE> != <any_extend2:CODE>” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (minus:HI (match_dup 3) (mult:HI (any_extend:HI (match_dup 1)) (any_extend2:HI (match_dup 2))))) (clobber (reg:CC REG_CC))])])

(define_insn “*<any_extend:extend_su><any_extend2:extend_su>msubqihi4” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (match_operand:HI 3 “register_operand” “0”) (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “a”)) (any_extend2:HI (match_operand:QI 2 “register_operand” “a”))))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed && <any_extend:CODE> != <any_extend2:CODE>” { output_asm_insn (<any_extend:CODE> == SIGN_EXTEND ? “mulsu %1,%2” : “mulsu %2,%1”, operands);

return "sub %A0,r0\;sbc %B0,r1\;clr __zero_reg__";

} [(set_attr “length” “4”)])

;; Handle small constants

;; Special case of a += 2*b as frequently seen with accesses to int arrays. ;; This is shorter, faster than MUL and has lower register pressure.

(define_insn_and_split “*umaddqihi4.2” [(set (match_operand:HI 0 “register_operand” “=r”) (plus:HI (mult:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “r”)) (const_int 2)) (match_operand:HI 2 “register_operand” “r”)))] “!reload_completed && !reg_overlap_mentioned_p (operands[0], operands[1])” { gcc_unreachable(); } “&& 1” [(set (match_dup 0) (match_dup 2)) ; *addhi3_zero_extend (set (match_dup 0) (plus:HI (zero_extend:HI (match_dup 1)) (match_dup 0))) ; *addhi3_zero_extend (set (match_dup 0) (plus:HI (zero_extend:HI (match_dup 1)) (match_dup 0)))])

;; “umaddqihi4.uconst” ;; “maddqihi4.sconst” (define_insn_and_split “*<extend_u>maddqihi4.<extend_su>const” [(set (match_operand:HI 0 “register_operand” “=r”) (plus:HI (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “<mul_r_d>”)) (match_operand:HI 2 “<extend_su>8_operand” “n”)) (match_operand:HI 3 “register_operand” “0”))) (clobber (match_scratch:QI 4 “=&d”))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(set (match_dup 4) (match_dup 2)) ; *umaddqihi4 resp. *maddqihi4 (set (match_dup 0) (plus:HI (mult:HI (any_extend:HI (match_dup 1)) (any_extend:HI (match_dup 4))) (match_dup 3)))] { operands[2] = gen_int_mode (INTVAL (operands[2]), QImode); })

;; “*umsubqihi4.uconst” ;; “*msubqihi4.sconst” (define_insn_and_split “*<extend_u>msubqihi4.<extend_su>const” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (match_operand:HI 3 “register_operand” “0”) (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “<mul_r_d>”)) (match_operand:HI 2 “<extend_su>8_operand” “n”)))) (clobber (match_scratch:QI 4 “=&d”))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(set (match_dup 4) (match_dup 2)) ; *umsubqihi4 resp. *msubqihi4 (set (match_dup 0) (minus:HI (match_dup 3) (mult:HI (any_extend:HI (match_dup 1)) (any_extend:HI (match_dup 4)))))] { operands[2] = gen_int_mode (INTVAL (operands[2]), QImode); })

;; Same as the insn above, but combiner tries versions canonicalized to ASHIFT ;; for MULT with power of 2 and skips trying MULT insn above.

(define_insn_and_split “*umsubqihi4.uconst.ashift” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (match_operand:HI 3 “register_operand” “0”) (ashift:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “r”)) (match_operand:HI 2 “const_2_to_7_operand” “n”)))) (clobber (match_scratch:QI 4 “=&d”))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(set (match_dup 4) (match_dup 2)) ; *umsubqihi4 (set (match_dup 0) (minus:HI (match_dup 3) (mult:HI (zero_extend:HI (match_dup 1)) (zero_extend:HI (match_dup 4)))))] { operands[2] = gen_int_mode (1 << INTVAL (operands[2]), QImode); })

;; Same as the insn above, but combiner tries versions canonicalized to ASHIFT ;; for MULT with power of 2 and skips trying MULT insn above. We omit 128 ;; because this would require an extra pattern for just one value.

(define_insn_and_split “*msubqihi4.sconst.ashift” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (match_operand:HI 3 “register_operand” “0”) (ashift:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “d”)) (match_operand:HI 2 “const_1_to_6_operand” “M”)))) (clobber (match_scratch:QI 4 “=&d”))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(set (match_dup 4) (match_dup 2)) ; *smsubqihi4 (set (match_dup 0) (minus:HI (match_dup 3) (mult:HI (sign_extend:HI (match_dup 1)) (sign_extend:HI (match_dup 4)))))] { operands[2] = gen_int_mode (1 << INTVAL (operands[2]), QImode); })

;; For signed/unsigned combinations that require narrow constraint “a” ;; just provide a pattern if signed/unsigned combination is actually needed.

(define_insn_and_split “*sumaddqihi4.uconst” [(set (match_operand:HI 0 “register_operand” “=r”) (plus:HI (mult:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “a”)) (match_operand:HI 2 “u8_operand” “M”)) (match_operand:HI 3 “register_operand” “0”))) (clobber (match_scratch:QI 4 “=&a”))] “AVR_HAVE_MUL && !s8_operand (operands[2], VOIDmode)” “#” “&& reload_completed” [(set (match_dup 4) (match_dup 2)) ; *sumaddqihi4 (set (match_dup 0) (plus:HI (mult:HI (sign_extend:HI (match_dup 1)) (zero_extend:HI (match_dup 4))) (match_dup 3)))] { operands[2] = gen_int_mode (INTVAL (operands[2]), QImode); })

(define_insn_and_split “*sumsubqihi4.uconst” [(set (match_operand:HI 0 “register_operand” “=r”) (minus:HI (match_operand:HI 3 “register_operand” “0”) (mult:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “a”)) (match_operand:HI 2 “u8_operand” “M”)))) (clobber (match_scratch:QI 4 “=&a”))] “AVR_HAVE_MUL && !s8_operand (operands[2], VOIDmode)” “#” “&& reload_completed” [(set (match_dup 4) (match_dup 2)) ; *sumsubqihi4 (set (match_dup 0) (minus:HI (match_dup 3) (mult:HI (sign_extend:HI (match_dup 1)) (zero_extend:HI (match_dup 4)))))] { operands[2] = gen_int_mode (INTVAL (operands[2]), QImode); })

;****************************************************************************** ; mul HI: $1 = sign/zero-extend, $2 = small constant ;******************************************************************************

;; “*muluqihi3.uconst” ;; “*mulsqihi3.sconst” (define_insn_and_split “*mul<extend_su>qihi3.<extend_su>const” [(set (match_operand:HI 0 “register_operand” “=r”) (mult:HI (any_extend:HI (match_operand:QI 1 “register_operand” “<mul_r_d>”)) (match_operand:HI 2 “<extend_su>8_operand” “n”))) (clobber (match_scratch:QI 3 “=&d”))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(set (match_dup 3) (match_dup 2)) ; umulqihi3 resp. mulqihi3 (set (match_dup 0) (mult:HI (any_extend:HI (match_dup 1)) (any_extend:HI (match_dup 3))))] { operands[2] = gen_int_mode (INTVAL (operands[2]), QImode); })

(define_insn_and_split “*muluqihi3.sconst” [(set (match_operand:HI 0 “register_operand” “=r”) (mult:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “a”)) (match_operand:HI 2 “s8_operand” “n”))) (clobber (match_scratch:QI 3 “=&a”))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(set (match_dup 3) (match_dup 2)) ; usmulqihi3 (set (match_dup 0) (mult:HI (zero_extend:HI (match_dup 1)) (sign_extend:HI (match_dup 3))))] { operands[2] = gen_int_mode (INTVAL (operands[2]), QImode); })

(define_insn_and_split “*mulsqihi3.uconst” [(set (match_operand:HI 0 “register_operand” “=r”) (mult:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “a”)) (match_operand:HI 2 “u8_operand” “M”))) (clobber (match_scratch:QI 3 “=&a”))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(set (match_dup 3) (match_dup 2)) ; usmulqihi3 (set (match_dup 0) (mult:HI (zero_extend:HI (match_dup 3)) (sign_extend:HI (match_dup 1))))] { operands[2] = gen_int_mode (INTVAL (operands[2]), QImode); })

(define_insn_and_split “*mulsqihi3.oconst” [(set (match_operand:HI 0 “register_operand” “=&r”) (mult:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “a”)) (match_operand:HI 2 “o8_operand” “n”))) (clobber (match_scratch:QI 3 “=&a”))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(set (match_dup 3) (match_dup 2)) ; *osmulqihi3 (set (match_dup 0) (mult:HI (not:HI (zero_extend:HI (not:QI (match_dup 3)))) (sign_extend:HI (match_dup 1))))] { operands[2] = gen_int_mode (INTVAL (operands[2]), QImode); })

;; The EXTEND of $1 only appears in combine, we don't see it in expand so that ;; expand decides to use ASHIFT instead of MUL because ASHIFT costs are cheaper ;; at that time. Fix that. (define_insn_and_split “*ashiftqihi2.signx.1_split” [(set (match_operand:HI 0 “register_operand” “=r,*r”) (ashift:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “0,r”)) (const_int 1)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ashift:HI (sign_extend:HI (match_dup 1)) (const_int 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*ashiftqihi2.signx.1” [(set (match_operand:HI 0 “register_operand” “=r,*r”) (ashift:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “0,r”)) (const_int 1))) (clobber (reg:CC REG_CC)) ] “reload_completed” “@ lsl %A0;sbc %B0,%B0 mov %A0,%1;lsl %A0;sbc %B0,%B0” [(set_attr “length” “2,3”)])

(define_insn_and_split “*ashifthi3.signx.const” [(set (match_operand:HI 0 “register_operand” “=r”) (ashift:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “d”)) (match_operand:HI 2 “const_2_to_6_operand” “I”))) (clobber (match_scratch:QI 3 “=&d”))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(set (match_dup 3) (match_dup 2)) ; mulqihi3 (set (match_dup 0) (mult:HI (sign_extend:HI (match_dup 1)) (sign_extend:HI (match_dup 3))))] { operands[2] = GEN_INT (1 << INTVAL (operands[2])); })

(define_insn_and_split “*ashifthi3.signx.const7” [(set (match_operand:HI 0 “register_operand” “=r”) (ashift:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “a”)) (const_int 7))) (clobber (match_scratch:QI 2 “=&a”))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(set (match_dup 2) (match_dup 3)) ; usmulqihi3 (set (match_dup 0) (mult:HI (zero_extend:HI (match_dup 2)) (sign_extend:HI (match_dup 1))))] { operands[3] = gen_int_mode (1 << 7, QImode); })

(define_insn_and_split “*ashifthi3.zerox.const” [(set (match_operand:HI 0 “register_operand” “=r”) (ashift:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “r”)) (match_operand:HI 2 “const_2_to_7_operand” “I”))) (clobber (match_scratch:QI 3 “=&d”))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(set (match_dup 3) (match_dup 2)) ; umulqihi3 (set (match_dup 0) (mult:HI (zero_extend:HI (match_dup 1)) (zero_extend:HI (match_dup 3))))] { operands[2] = gen_int_mode (1 << INTVAL (operands[2]), QImode); })

;****************************************************************************** ; mul HI: $1 = sign-/zero-/one-extend, $2 = reg ;******************************************************************************

(define_insn_and_split “mulsqihi3” [(set (match_operand:HI 0 “register_operand” “=&r”) (mult:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “a”)) (match_operand:HI 2 “register_operand” “a”)))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (mult:HI (sign_extend:HI (match_dup 1)) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*mulsqihi3” [(set (match_operand:HI 0 “register_operand” “=&r”) (mult:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “a”)) (match_operand:HI 2 “register_operand” “a”))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mulsu %1,%A2 movw %0,r0 mul %1,%B2 add %B0,r0 clr zero_reg” [(set_attr “length” “5”)])

(define_insn_and_split “muluqihi3” [(set (match_operand:HI 0 “register_operand” “=&r”) (mult:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “r”)) (match_operand:HI 2 “register_operand” “r”)))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (mult:HI (zero_extend:HI (match_dup 1)) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*muluqihi3” [(set (match_operand:HI 0 “register_operand” “=&r”) (mult:HI (zero_extend:HI (match_operand:QI 1 “register_operand” “r”)) (match_operand:HI 2 “register_operand” “r”))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mul %1,%A2 movw %0,r0 mul %1,%B2 add %B0,r0 clr zero_reg” [(set_attr “length” “5”)])

;; one-extend operand 1

(define_insn_and_split “muloqihi3” [(set (match_operand:HI 0 “register_operand” “=&r”) (mult:HI (not:HI (zero_extend:HI (not:QI (match_operand:QI 1 “register_operand” “r”)))) (match_operand:HI 2 “register_operand” “r”)))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (mult:HI (not:HI (zero_extend:HI (not:QI (match_dup 1)))) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*muloqihi3” [(set (match_operand:HI 0 “register_operand” “=&r”) (mult:HI (not:HI (zero_extend:HI (not:QI (match_operand:QI 1 “register_operand” “r”)))) (match_operand:HI 2 “register_operand” “r”))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mul %1,%A2 movw %0,r0 mul %1,%B2 add %B0,r0 sub %B0,%A2 clr zero_reg” [(set_attr “length” “6”)])

;******************************************************************************

(define_expand “mulhi3” [(set (match_operand:HI 0 “register_operand” "") (mult:HI (match_operand:HI 1 “register_operand” "") (match_operand:HI 2 “register_or_s9_operand” "")))] "" { if (!AVR_HAVE_MUL) { if (!register_operand (operands[2], HImode)) operands[2] = force_reg (HImode, operands[2]);

    emit_insn (gen_mulhi3_call (operands[0], operands[1], operands[2]));
    DONE;
  }

/* ; For small constants we can do better by extending them on the fly.
   ; The constant can be loaded in one instruction and the widening
   ; multiplication is shorter.  First try the unsigned variant because it
   ; allows constraint "d" instead of "a" for the signed version.  */

if (s9_operand (operands[2], HImode))
  {
    rtx reg = force_reg (QImode, gen_int_mode (INTVAL (operands[2]), QImode));

    if (u8_operand (operands[2], HImode))
      {
        emit_insn (gen_muluqihi3 (operands[0], reg, operands[1]));
      }
    else if (s8_operand (operands[2], HImode))
      {
        emit_insn (gen_mulsqihi3 (operands[0], reg, operands[1]));
      }
    else
      {
        emit_insn (gen_muloqihi3 (operands[0], reg, operands[1]));
      }

    DONE;
  }

if (!register_operand (operands[2], HImode))
  operands[2] = force_reg (HImode, operands[2]);

})

(define_insn_and_split “*mulhi3_enh_split” [(set (match_operand:HI 0 “register_operand” “=&r”) (mult:HI (match_operand:HI 1 “register_operand” “r”) (match_operand:HI 2 “register_operand” “r”)))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (mult:HI (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*mulhi3_enh” [(set (match_operand:HI 0 “register_operand” “=&r”) (mult:HI (match_operand:HI 1 “register_operand” “r”) (match_operand:HI 2 “register_operand” “r”))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” { return REGNO (operands[1]) == REGNO (operands[2]) ? “mul %A1,%A1;movw %0,r0;mul %A1,%B1;add %B0,r0;add %B0,r0;clr r1” : “mul %A1,%A2;movw %0,r0;mul %A1,%B2;add %B0,r0;mul %B1,%A2;add %B0,r0;clr r1”; } [(set_attr “length” “7”)])

(define_expand “mulhi3_call” [(set (reg:HI 24) (match_operand:HI 1 “register_operand” "")) (set (reg:HI 22) (match_operand:HI 2 “register_operand” "")) (parallel [(set (reg:HI 24) (mult:HI (reg:HI 24) (reg:HI 22))) (clobber (reg:HI 22)) (clobber (reg:QI 21))]) (set (match_operand:HI 0 “register_operand” "") (reg:HI 24))] "" { avr_fix_inputs (operands, (1 << 2), regmask (HImode, 24)); })

(define_insn_and_split “*mulhi3_call_split” [(set (reg:HI 24) (mult:HI (reg:HI 24) (reg:HI 22))) (clobber (reg:HI 22)) (clobber (reg:QI 21))] “!AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (mult:HI (reg:HI 24) (reg:HI 22))) (clobber (reg:HI 22)) (clobber (reg:QI 21)) (clobber (reg:CC REG_CC))])])

(define_insn “*mulhi3_call” [(set (reg:HI 24) (mult:HI (reg:HI 24) (reg:HI 22))) (clobber (reg:HI 22)) (clobber (reg:QI 21)) (clobber (reg:CC REG_CC))] “!AVR_HAVE_MUL && reload_completed” “%~call __mulhi3” [(set_attr “type” “xcall”)])

;; To support widening multiplication with constant we postpone ;; expanding to the implicit library call until post combine and ;; prior to register allocation. Clobber all hard registers that ;; might be used by the (widening) multiply until it is split and ;; it's final register footprint is worked out.

(define_expand “mulsi3” [(parallel [(set (match_operand:SI 0 “register_operand” "") (mult:SI (match_operand:SI 1 “register_operand” "") (match_operand:SI 2 “nonmemory_operand” ""))) (clobber (reg:HI 26)) (clobber (reg:DI 18))])] “AVR_HAVE_MUL” { if (u16_operand (operands[2], SImode)) { operands[2] = force_reg (HImode, gen_int_mode (INTVAL (operands[2]), HImode)); emit_insn (gen_muluhisi3 (operands[0], operands[2], operands[1])); DONE; }

if (o16_operand (operands[2], SImode))
  {
    operands[2] = force_reg (HImode, gen_int_mode (INTVAL (operands[2]), HImode));
    emit_insn (gen_mulohisi3 (operands[0], operands[2], operands[1]));
    DONE;
  }

if (avr_emit3_fix_outputs (gen_mulsi3, operands, 1 << 0,
                           regmask (DImode, 18) | regmask (HImode, 26)))
  DONE;

})

(define_insn_and_split “*mulsi3” [(set (match_operand:SI 0 “pseudo_register_operand” “=r”) (mult:SI (match_operand:SI 1 “pseudo_register_operand” “r”) (match_operand:SI 2 “pseudo_register_or_const_int_operand” “rn”))) (clobber (reg:HI 26)) (clobber (reg:DI 18))] “AVR_HAVE_MUL && !reload_completed” { gcc_unreachable(); } “&& 1” [(set (reg:SI 18) (match_dup 1)) (set (reg:SI 22) (match_dup 2)) (parallel [(set (reg:SI 22) (mult:SI (reg:SI 22) (reg:SI 18))) (clobber (reg:HI 26))]) (set (match_dup 0) (reg:SI 22))] { if (u16_operand (operands[2], SImode)) { operands[2] = force_reg (HImode, gen_int_mode (INTVAL (operands[2]), HImode)); emit_insn (gen_muluhisi3 (operands[0], operands[2], operands[1])); DONE; }

if (o16_operand (operands[2], SImode))
  {
    operands[2] = force_reg (HImode, gen_int_mode (INTVAL (operands[2]), HImode));
    emit_insn (gen_mulohisi3 (operands[0], operands[2], operands[1]));
    DONE;
  }

})

;; “muluqisi3” ;; “muluhisi3” (define_expand “mulusi3” [(parallel [(set (match_operand:SI 0 “pseudo_register_operand” "") (mult:SI (zero_extend:SI (match_operand:QIHI 1 “pseudo_register_operand” "")) (match_operand:SI 2 “pseudo_register_or_const_int_operand” ""))) (clobber (reg:HI 26)) (clobber (reg:DI 18))])] “AVR_HAVE_MUL” { avr_fix_inputs (operands, (1 << 1) | (1 << 2), -1u); if (avr_emit3_fix_outputs (gen_mulusi3, operands, 1 << 0, regmask (DImode, 18) | regmask (HImode, 26))) DONE; })

;; “*muluqisi3” ;; “*muluhisi3” (define_insn_and_split “*mulusi3” [(set (match_operand:SI 0 “pseudo_register_operand” “=r”) (mult:SI (zero_extend:SI (match_operand:QIHI 1 “pseudo_register_operand” “r”)) (match_operand:SI 2 “pseudo_register_or_const_int_operand” “rn”))) (clobber (reg:HI 26)) (clobber (reg:DI 18))] “AVR_HAVE_MUL && !reload_completed” { gcc_unreachable(); } “&& 1” [(set (reg:HI 26) (match_dup 1)) (set (reg:SI 18) (match_dup 2)) (set (reg:SI 22) (mult:SI (zero_extend:SI (reg:HI 26)) (reg:SI 18))) (set (match_dup 0) (reg:SI 22))] { /* Do the QI -> HI extension explicitely before the multiplication. / / Do the HI -> SI extension implicitely and after the multiplication. */

if (QImode == <MODE>mode)
  operands[1] = gen_rtx_ZERO_EXTEND (HImode, operands[1]);

if (u16_operand (operands[2], SImode))
  {
    operands[1] = force_reg (HImode, operands[1]);
    operands[2] = force_reg (HImode, gen_int_mode (INTVAL (operands[2]), HImode));
    emit_insn (gen_umulhisi3 (operands[0], operands[1], operands[2]));
    DONE;
  }

})

;; “mulsqisi3” ;; “mulshisi3” (define_expand “mulssi3” [(parallel [(set (match_operand:SI 0 “pseudo_register_operand” "") (mult:SI (sign_extend:SI (match_operand:QIHI 1 “pseudo_register_operand” "")) (match_operand:SI 2 “pseudo_register_or_const_int_operand” ""))) (clobber (reg:HI 26)) (clobber (reg:DI 18))])] “AVR_HAVE_MUL” { avr_fix_inputs (operands, (1 << 1) | (1 << 2), -1u); if (avr_emit3_fix_outputs (gen_mulssi3, operands, 1 << 0, regmask (DImode, 18) | regmask (HImode, 26))) DONE; })

;; “*mulsqisi3” ;; “*mulshisi3” (define_insn_and_split “*mulssi3” [(set (match_operand:SI 0 “pseudo_register_operand” “=r”) (mult:SI (sign_extend:SI (match_operand:QIHI 1 “pseudo_register_operand” “r”)) (match_operand:SI 2 “pseudo_register_or_const_int_operand” “rn”))) (clobber (reg:HI 26)) (clobber (reg:DI 18))] “AVR_HAVE_MUL && !reload_completed” { gcc_unreachable(); } “&& 1” [(set (reg:HI 26) (match_dup 1)) (set (reg:SI 18) (match_dup 2)) (set (reg:SI 22) (mult:SI (sign_extend:SI (reg:HI 26)) (reg:SI 18))) (set (match_dup 0) (reg:SI 22))] { /* Do the QI -> HI extension explicitely before the multiplication. / / Do the HI -> SI extension implicitely and after the multiplication. */

if (QImode == <MODE>mode)
  operands[1] = gen_rtx_SIGN_EXTEND (HImode, operands[1]);

if (u16_operand (operands[2], SImode)
    || s16_operand (operands[2], SImode))
  {
    rtx xop2 = force_reg (HImode, gen_int_mode (INTVAL (operands[2]), HImode));

    operands[1] = force_reg (HImode, operands[1]);

    if (u16_operand (operands[2], SImode))
      emit_insn (gen_usmulhisi3 (operands[0], xop2, operands[1]));
    else
      emit_insn (gen_mulhisi3 (operands[0], operands[1], xop2));

    DONE;
  }

})

;; One-extend operand 1

(define_expand “mulohisi3” [(parallel [(set (match_operand:SI 0 “pseudo_register_operand” "") (mult:SI (not:SI (zero_extend:SI (not:HI (match_operand:HI 1 “pseudo_register_operand” "")))) (match_operand:SI 2 “pseudo_register_or_const_int_operand” ""))) (clobber (reg:HI 26)) (clobber (reg:DI 18))])] “AVR_HAVE_MUL” { avr_fix_inputs (operands, (1 << 1) | (1 << 2), -1u); if (avr_emit3_fix_outputs (gen_mulohisi3, operands, 1 << 0, regmask (DImode, 18) | regmask (HImode, 26))) DONE; })

(define_insn_and_split “*mulohisi3” [(set (match_operand:SI 0 “pseudo_register_operand” “=r”) (mult:SI (not:SI (zero_extend:SI (not:HI (match_operand:HI 1 “pseudo_register_operand” “r”)))) (match_operand:SI 2 “pseudo_register_or_const_int_operand” “rn”))) (clobber (reg:HI 26)) (clobber (reg:DI 18))] “AVR_HAVE_MUL && !reload_completed” { gcc_unreachable(); } “&& 1” [(set (reg:HI 26) (match_dup 1)) (set (reg:SI 18) (match_dup 2)) (set (reg:SI 22) (mult:SI (not:SI (zero_extend:SI (not:HI (reg:HI 26)))) (reg:SI 18))) (set (match_dup 0) (reg:SI 22))])

;; “mulhisi3” ;; “umulhisi3” (define_expand “<extend_u>mulhisi3” [(parallel [(set (match_operand:SI 0 “register_operand” "") (mult:SI (any_extend:SI (match_operand:HI 1 “register_operand” "")) (any_extend:SI (match_operand:HI 2 “register_operand” "")))) (clobber (reg:HI 26)) (clobber (reg:DI 18))])] “AVR_HAVE_MUL” { if (avr_emit3_fix_outputs (gen_<extend_u>mulhisi3, operands, 1 << 0, regmask (DImode, 18) | regmask (HImode, 26))) DONE; })

(define_expand “usmulhisi3” [(parallel [(set (match_operand:SI 0 “register_operand” "") (mult:SI (zero_extend:SI (match_operand:HI 1 “register_operand” "")) (sign_extend:SI (match_operand:HI 2 “register_operand” "")))) (clobber (reg:HI 26)) (clobber (reg:DI 18))])] “AVR_HAVE_MUL” { if (avr_emit3_fix_outputs (gen_usmulhisi3, operands, 1 << 0, regmask (DImode, 18) | regmask (HImode, 26))) DONE; })

;; “*uumulqihisi3” “*uumulhiqisi3” “*uumulhihisi3” “*uumulqiqisi3” ;; “*usmulqihisi3” “*usmulhiqisi3” “*usmulhihisi3” “*usmulqiqisi3” ;; “*sumulqihisi3” “*sumulhiqisi3” “*sumulhihisi3” “*sumulqiqisi3” ;; “*ssmulqihisi3” “*ssmulhiqisi3” “*ssmulhihisi3” “*ssmulqiqisi3” (define_insn_and_split “*<any_extend:extend_su><any_extend2:extend_su>mulQIHI:modeQIHI2:modesi3” [(set (match_operand:SI 0 “pseudo_register_operand” “=r”) (mult:SI (any_extend:SI (match_operand:QIHI 1 “pseudo_register_operand” “r”)) (any_extend2:SI (match_operand:QIHI2 2 “pseudo_register_operand” “r”)))) (clobber (reg:HI 26)) (clobber (reg:DI 18))] “AVR_HAVE_MUL && !reload_completed” { gcc_unreachable(); } “&& 1” [(set (reg:HI 18) (match_dup 1)) (set (reg:HI 26) (match_dup 2)) (set (reg:SI 22) (mult:SI (match_dup 3) (match_dup 4))) (set (match_dup 0) (reg:SI 22))] { rtx xop1 = operands[1]; rtx xop2 = operands[2];

/* Do the QI -> HI extension explicitely before the multiplication.  */
/* Do the HI -> SI extension implicitely and after the multiplication.  */

if (QImode == <QIHI:MODE>mode)
  xop1 = gen_rtx_fmt_e (<any_extend:CODE>, HImode, xop1);

if (QImode == <QIHI2:MODE>mode)
  xop2 = gen_rtx_fmt_e (<any_extend2:CODE>, HImode, xop2);

if (<any_extend:CODE> == <any_extend2:CODE>
    || <any_extend:CODE> == ZERO_EXTEND)
  {
    operands[1] = xop1;
    operands[2] = xop2;
    operands[3] = gen_rtx_fmt_e (<any_extend:CODE>, SImode, gen_rtx_REG (HImode, 18));
    operands[4] = gen_rtx_fmt_e (<any_extend2:CODE>, SImode, gen_rtx_REG (HImode, 26));
  }
else
  {
    /* <any_extend:CODE>  = SIGN_EXTEND */
    /* <any_extend2:CODE> = ZERO_EXTEND */

    operands[1] = xop2;
    operands[2] = xop1;
    operands[3] = gen_rtx_ZERO_EXTEND (SImode, gen_rtx_REG (HImode, 18));
    operands[4] = gen_rtx_SIGN_EXTEND (SImode, gen_rtx_REG (HImode, 26));
  }

})

;; “smulhi3_highpart” ;; “umulhi3_highpart” (define_expand “<extend_su>mulhi3_highpart” [(set (reg:HI 18) (match_operand:HI 1 “nonmemory_operand” "")) (set (reg:HI 26) (match_operand:HI 2 “nonmemory_operand” "")) (parallel [(set (reg:HI 24) (truncate:HI (lshiftrt:SI (mult:SI (any_extend:SI (reg:HI 18)) (any_extend:SI (reg:HI 26))) (const_int 16)))) (clobber (reg:HI 22))]) (set (match_operand:HI 0 “register_operand” "") (reg:HI 24))] “AVR_HAVE_MUL” { avr_fix_inputs (operands, 1 << 2, regmask (HImode, 18)); })

(define_insn_and_split “*mulsi3_call_split” [(set (reg:SI 22) (mult:SI (reg:SI 22) (reg:SI 18))) (clobber (reg:HI 26))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:SI 22) (mult:SI (reg:SI 22) (reg:SI 18))) (clobber (reg:HI 26)) (clobber (reg:CC REG_CC))])])

(define_insn “*mulsi3_call” [(set (reg:SI 22) (mult:SI (reg:SI 22) (reg:SI 18))) (clobber (reg:HI 26)) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “%~call __mulsi3” [(set_attr “type” “xcall”)])

;; “*mulhisi3_call” ;; “*umulhisi3_call” (define_insn_and_split “*<extend_u>mulhisi3_call_split” [(set (reg:SI 22) (mult:SI (any_extend:SI (reg:HI 18)) (any_extend:SI (reg:HI 26))))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:SI 22) (mult:SI (any_extend:SI (reg:HI 18)) (any_extend:SI (reg:HI 26)))) (clobber (reg:CC REG_CC))])])

(define_insn “*<extend_u>mulhisi3_call” [(set (reg:SI 22) (mult:SI (any_extend:SI (reg:HI 18)) (any_extend:SI (reg:HI 26)))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “%~call __<extend_u>mulhisi3” [(set_attr “type” “xcall”)])

;; “*umulhi3_highpart_call” ;; “*smulhi3_highpart_call” (define_insn_and_split “*<extend_su>mulhi3_highpart_call_split” [(set (reg:HI 24) (truncate:HI (lshiftrt:SI (mult:SI (any_extend:SI (reg:HI 18)) (any_extend:SI (reg:HI 26))) (const_int 16)))) (clobber (reg:HI 22))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (truncate:HI (lshiftrt:SI (mult:SI (any_extend:SI (reg:HI 18)) (any_extend:SI (reg:HI 26))) (const_int 16)))) (clobber (reg:HI 22)) (clobber (reg:CC REG_CC))])])

(define_insn “*<extend_su>mulhi3_highpart_call” [(set (reg:HI 24) (truncate:HI (lshiftrt:SI (mult:SI (any_extend:SI (reg:HI 18)) (any_extend:SI (reg:HI 26))) (const_int 16)))) (clobber (reg:HI 22)) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “%~call __<extend_u>mulhisi3” [(set_attr “type” “xcall”)])

(define_insn_and_split “*usmulhisi3_call_split” [(set (reg:SI 22) (mult:SI (zero_extend:SI (reg:HI 18)) (sign_extend:SI (reg:HI 26))))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:SI 22) (mult:SI (zero_extend:SI (reg:HI 18)) (sign_extend:SI (reg:HI 26)))) (clobber (reg:CC REG_CC))])])

(define_insn “*usmulhisi3_call” [(set (reg:SI 22) (mult:SI (zero_extend:SI (reg:HI 18)) (sign_extend:SI (reg:HI 26)))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “%~call __usmulhisi3” [(set_attr “type” “xcall”)])

(define_insn_and_split “*mul<extend_su>hisi3_call_split” [(set (reg:SI 22) (mult:SI (any_extend:SI (reg:HI 26)) (reg:SI 18)))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:SI 22) (mult:SI (any_extend:SI (reg:HI 26)) (reg:SI 18))) (clobber (reg:CC REG_CC))])])

(define_insn “*mul<extend_su>hisi3_call” [(set (reg:SI 22) (mult:SI (any_extend:SI (reg:HI 26)) (reg:SI 18))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “%~call __mul<extend_su>hisi3” [(set_attr “type” “xcall”)])

(define_insn_and_split “*mulohisi3_call_split” [(set (reg:SI 22) (mult:SI (not:SI (zero_extend:SI (not:HI (reg:HI 26)))) (reg:SI 18)))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:SI 22) (mult:SI (not:SI (zero_extend:SI (not:HI (reg:HI 26)))) (reg:SI 18))) (clobber (reg:CC REG_CC))])])

(define_insn “*mulohisi3_call” [(set (reg:SI 22) (mult:SI (not:SI (zero_extend:SI (not:HI (reg:HI 26)))) (reg:SI 18))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “%~call __mulohisi3” [(set_attr “type” “xcall”)])

; / % / % / % / % / % / % / % / % / % / % / % / % / % / % / % / % / % / % / % ; divmod

;; Generate lib1funcs.S calls ourselves, because: ;; - we know exactly which registers are clobbered (for QI and HI ;; modes, some of the call-used registers are preserved) ;; - we get both the quotient and the remainder at no extra cost ;; - we split the patterns only after the first CSE passes because ;; CSE has problems to operate on hard regs. ;; (define_insn_and_split “divmodqi4” [(set (match_operand:QI 0 “pseudo_register_operand” "") (div:QI (match_operand:QI 1 “pseudo_register_operand” "") (match_operand:QI 2 “pseudo_register_operand” ""))) (set (match_operand:QI 3 “pseudo_register_operand” "") (mod:QI (match_dup 1) (match_dup 2))) (clobber (reg:QI 22)) (clobber (reg:QI 23)) (clobber (reg:QI 24)) (clobber (reg:QI 25))] "" “this divmodqi4 pattern should have been splitted;” "" [(set (reg:QI 24) (match_dup 1)) (set (reg:QI 22) (match_dup 2)) (parallel [(set (reg:QI 24) (div:QI (reg:QI 24) (reg:QI 22))) (set (reg:QI 25) (mod:QI (reg:QI 24) (reg:QI 22))) (clobber (reg:QI 22)) (clobber (reg:QI 23))]) (set (match_dup 0) (reg:QI 24)) (set (match_dup 3) (reg:QI 25))])

(define_insn_and_split “*divmodqi4_call_split” [(set (reg:QI 24) (div:QI (reg:QI 24) (reg:QI 22))) (set (reg:QI 25) (mod:QI (reg:QI 24) (reg:QI 22))) (clobber (reg:QI 22)) (clobber (reg:QI 23))] "" “#” “&& reload_completed” [(parallel [(set (reg:QI 24) (div:QI (reg:QI 24) (reg:QI 22))) (set (reg:QI 25) (mod:QI (reg:QI 24) (reg:QI 22))) (clobber (reg:QI 22)) (clobber (reg:QI 23)) (clobber (reg:CC REG_CC))])])

(define_insn “*divmodqi4_call” [(set (reg:QI 24) (div:QI (reg:QI 24) (reg:QI 22))) (set (reg:QI 25) (mod:QI (reg:QI 24) (reg:QI 22))) (clobber (reg:QI 22)) (clobber (reg:QI 23)) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __divmodqi4” [(set_attr “type” “xcall”)])

(define_insn_and_split “udivmodqi4” [(set (match_operand:QI 0 “pseudo_register_operand” "") (udiv:QI (match_operand:QI 1 “pseudo_register_operand” "") (match_operand:QI 2 “pseudo_register_operand” ""))) (set (match_operand:QI 3 “pseudo_register_operand” "") (umod:QI (match_dup 1) (match_dup 2))) (clobber (reg:QI 22)) (clobber (reg:QI 23)) (clobber (reg:QI 24)) (clobber (reg:QI 25))] "" “this udivmodqi4 pattern should have been splitted;” "" [(set (reg:QI 24) (match_dup 1)) (set (reg:QI 22) (match_dup 2)) (parallel [(set (reg:QI 24) (udiv:QI (reg:QI 24) (reg:QI 22))) (set (reg:QI 25) (umod:QI (reg:QI 24) (reg:QI 22))) (clobber (reg:QI 23))]) (set (match_dup 0) (reg:QI 24)) (set (match_dup 3) (reg:QI 25))])

(define_insn_and_split “*udivmodqi4_call_split” [(set (reg:QI 24) (udiv:QI (reg:QI 24) (reg:QI 22))) (set (reg:QI 25) (umod:QI (reg:QI 24) (reg:QI 22))) (clobber (reg:QI 23))] "" “#” “&& reload_completed” [(parallel [(set (reg:QI 24) (udiv:QI (reg:QI 24) (reg:QI 22))) (set (reg:QI 25) (umod:QI (reg:QI 24) (reg:QI 22))) (clobber (reg:QI 23)) (clobber (reg:CC REG_CC))])])

(define_insn “*udivmodqi4_call” [(set (reg:QI 24) (udiv:QI (reg:QI 24) (reg:QI 22))) (set (reg:QI 25) (umod:QI (reg:QI 24) (reg:QI 22))) (clobber (reg:QI 23)) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __udivmodqi4” [(set_attr “type” “xcall”)])

(define_insn_and_split “divmodhi4” [(set (match_operand:HI 0 “pseudo_register_operand” "") (div:HI (match_operand:HI 1 “pseudo_register_operand” "") (match_operand:HI 2 “pseudo_register_operand” ""))) (set (match_operand:HI 3 “pseudo_register_operand” "") (mod:HI (match_dup 1) (match_dup 2))) (clobber (reg:QI 21)) (clobber (reg:HI 22)) (clobber (reg:HI 24)) (clobber (reg:HI 26))] "" “this should have been splitted;” "" [(set (reg:HI 24) (match_dup 1)) (set (reg:HI 22) (match_dup 2)) (parallel [(set (reg:HI 22) (div:HI (reg:HI 24) (reg:HI 22))) (set (reg:HI 24) (mod:HI (reg:HI 24) (reg:HI 22))) (clobber (reg:HI 26)) (clobber (reg:QI 21))]) (set (match_dup 0) (reg:HI 22)) (set (match_dup 3) (reg:HI 24))])

(define_insn_and_split “*divmodhi4_call_split” [(set (reg:HI 22) (div:HI (reg:HI 24) (reg:HI 22))) (set (reg:HI 24) (mod:HI (reg:HI 24) (reg:HI 22))) (clobber (reg:HI 26)) (clobber (reg:QI 21))] "" “#” “&& reload_completed” [(parallel [(set (reg:HI 22) (div:HI (reg:HI 24) (reg:HI 22))) (set (reg:HI 24) (mod:HI (reg:HI 24) (reg:HI 22))) (clobber (reg:HI 26)) (clobber (reg:QI 21)) (clobber (reg:CC REG_CC))])])

(define_insn “*divmodhi4_call” [(set (reg:HI 22) (div:HI (reg:HI 24) (reg:HI 22))) (set (reg:HI 24) (mod:HI (reg:HI 24) (reg:HI 22))) (clobber (reg:HI 26)) (clobber (reg:QI 21)) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __divmodhi4” [(set_attr “type” “xcall”)])

(define_insn_and_split “udivmodhi4” [(set (match_operand:HI 0 “pseudo_register_operand” "") (udiv:HI (match_operand:HI 1 “pseudo_register_operand” "") (match_operand:HI 2 “pseudo_register_operand” ""))) (set (match_operand:HI 3 “pseudo_register_operand” "") (umod:HI (match_dup 1) (match_dup 2))) (clobber (reg:QI 21)) (clobber (reg:HI 22)) (clobber (reg:HI 24)) (clobber (reg:HI 26))] "" “this udivmodhi4 pattern should have been splitted.;” "" [(set (reg:HI 24) (match_dup 1)) (set (reg:HI 22) (match_dup 2)) (parallel [(set (reg:HI 22) (udiv:HI (reg:HI 24) (reg:HI 22))) (set (reg:HI 24) (umod:HI (reg:HI 24) (reg:HI 22))) (clobber (reg:HI 26)) (clobber (reg:QI 21))]) (set (match_dup 0) (reg:HI 22)) (set (match_dup 3) (reg:HI 24))])

(define_insn_and_split “*udivmodhi4_call_split” [(set (reg:HI 22) (udiv:HI (reg:HI 24) (reg:HI 22))) (set (reg:HI 24) (umod:HI (reg:HI 24) (reg:HI 22))) (clobber (reg:HI 26)) (clobber (reg:QI 21))] "" “#” “&& reload_completed” [(parallel [(set (reg:HI 22) (udiv:HI (reg:HI 24) (reg:HI 22))) (set (reg:HI 24) (umod:HI (reg:HI 24) (reg:HI 22))) (clobber (reg:HI 26)) (clobber (reg:QI 21)) (clobber (reg:CC REG_CC))])])

(define_insn “*udivmodhi4_call” [(set (reg:HI 22) (udiv:HI (reg:HI 24) (reg:HI 22))) (set (reg:HI 24) (umod:HI (reg:HI 24) (reg:HI 22))) (clobber (reg:HI 26)) (clobber (reg:QI 21)) (clobber (reg:CC REG_CC)) ] “reload_completed” “%~call __udivmodhi4” [(set_attr “type” “xcall”)])

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; 24-bit multiply

;; To support widening multiplication with constant we postpone ;; expanding to the implicit library call until post combine and ;; prior to register allocation. Clobber all hard registers that ;; might be used by the (widening) multiply until it is split and ;; it's final register footprint is worked out.

(define_expand “mulpsi3” [(parallel [(set (match_operand:PSI 0 “register_operand” "") (mult:PSI (match_operand:PSI 1 “register_operand” "") (match_operand:PSI 2 “nonmemory_operand” ""))) (clobber (reg:HI 26)) (clobber (reg:DI 18))])] “AVR_HAVE_MUL” { if (s8_operand (operands[2], PSImode)) { rtx reg = force_reg (QImode, gen_int_mode (INTVAL (operands[2]), QImode)); emit_insn (gen_mulsqipsi3 (operands[0], reg, operands[1])); DONE; }

if (avr_emit3_fix_outputs (gen_mulpsi3, operands, 1u << 0,
                           regmask (DImode, 18) | regmask (HImode, 26)))
  DONE;

})

(define_insn_and_split “*umulqihipsi3_split” [(set (match_operand:PSI 0 “register_operand” “=&r”) (mult:PSI (zero_extend:PSI (match_operand:QI 1 “register_operand” “r”)) (zero_extend:PSI (match_operand:HI 2 “register_operand” “r”))))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (mult:PSI (zero_extend:PSI (match_dup 1)) (zero_extend:PSI (match_dup 2)))) (clobber (reg:CC REG_CC))])])

(define_insn “*umulqihipsi3” [(set (match_operand:PSI 0 “register_operand” “=&r”) (mult:PSI (zero_extend:PSI (match_operand:QI 1 “register_operand” “r”)) (zero_extend:PSI (match_operand:HI 2 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mul %1,%A2 movw %A0,r0 mul %1,%B2 clr %C0 add %B0,r0 adc %C0,r1 clr zero_reg” [(set_attr “length” “7”)])

(define_insn_and_split “*umulhiqipsi3_split” [(set (match_operand:PSI 0 “register_operand” “=&r”) (mult:PSI (zero_extend:PSI (match_operand:HI 2 “register_operand” “r”)) (zero_extend:PSI (match_operand:QI 1 “register_operand” “r”))))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (mult:PSI (zero_extend:PSI (match_dup 2)) (zero_extend:PSI (match_dup 1)))) (clobber (reg:CC REG_CC))])])

(define_insn “*umulhiqipsi3” [(set (match_operand:PSI 0 “register_operand” “=&r”) (mult:PSI (zero_extend:PSI (match_operand:HI 2 “register_operand” “r”)) (zero_extend:PSI (match_operand:QI 1 “register_operand” “r”)))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “mul %1,%A2 movw %A0,r0 mul %1,%B2 add %B0,r0 mov %C0,r1 clr zero_reg adc %C0,zero_reg” [(set_attr “length” “7”)])

(define_expand “mulsqipsi3” [(parallel [(set (match_operand:PSI 0 “pseudo_register_operand” "") (mult:PSI (sign_extend:PSI (match_operand:QI 1 “pseudo_register_operand” ““)) (match_operand:PSI 2 “pseudo_register_or_const_int_operand”””))) (clobber (reg:HI 26)) (clobber (reg:DI 18))])] “AVR_HAVE_MUL” { avr_fix_inputs (operands, (1 << 1) | (1 << 2), -1u); if (avr_emit3_fix_outputs (gen_mulsqipsi3, operands, 1 << 0, regmask (DImode, 18) | regmask (HImode, 26))) DONE; })

(define_insn_and_split “*mulsqipsi3” [(set (match_operand:PSI 0 “pseudo_register_operand” “=r”) (mult:PSI (sign_extend:PSI (match_operand:QI 1 “pseudo_register_operand” “r”)) (match_operand:PSI 2 “pseudo_register_or_const_int_operand” “rn”))) (clobber (reg:HI 26)) (clobber (reg:DI 18))] “AVR_HAVE_MUL && !reload_completed” { gcc_unreachable(); } “&& 1” [(set (reg:QI 25) (match_dup 1)) (set (reg:PSI 22) (match_dup 2)) (set (reg:PSI 18) (mult:PSI (sign_extend:PSI (reg:QI 25)) (reg:PSI 22))) (set (match_dup 0) (reg:PSI 18))])

(define_insn_and_split “*mulpsi3” [(set (match_operand:PSI 0 “pseudo_register_operand” “=r”) (mult:PSI (match_operand:PSI 1 “pseudo_register_operand” “r”) (match_operand:PSI 2 “pseudo_register_or_const_int_operand” “rn”))) (clobber (reg:HI 26)) (clobber (reg:DI 18))] “AVR_HAVE_MUL && !reload_completed” { gcc_unreachable(); } “&& 1” [(set (reg:PSI 18) (match_dup 1)) (set (reg:PSI 22) (match_dup 2)) (parallel [(set (reg:PSI 22) (mult:PSI (reg:PSI 22) (reg:PSI 18))) (clobber (reg:QI 21)) (clobber (reg:QI 25)) (clobber (reg:HI 26))]) (set (match_dup 0) (reg:PSI 22))] { if (s8_operand (operands[2], PSImode)) { rtx reg = force_reg (QImode, gen_int_mode (INTVAL (operands[2]), QImode)); emit_insn (gen_mulsqipsi3 (operands[0], reg, operands[1])); DONE; } })

(define_insn_and_split “*mulsqipsi3.libgcc_split” [(set (reg:PSI 18) (mult:PSI (sign_extend:PSI (reg:QI 25)) (reg:PSI 22)))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:PSI 18) (mult:PSI (sign_extend:PSI (reg:QI 25)) (reg:PSI 22))) (clobber (reg:CC REG_CC))])])

(define_insn “*mulsqipsi3.libgcc” [(set (reg:PSI 18) (mult:PSI (sign_extend:PSI (reg:QI 25)) (reg:PSI 22))) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “%~call __mulsqipsi3” [(set_attr “type” “xcall”)])

(define_insn_and_split “*mulpsi3.libgcc_split” [(set (reg:PSI 22) (mult:PSI (reg:PSI 22) (reg:PSI 18))) (clobber (reg:QI 21)) (clobber (reg:QI 25)) (clobber (reg:HI 26))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:PSI 22) (mult:PSI (reg:PSI 22) (reg:PSI 18))) (clobber (reg:QI 21)) (clobber (reg:QI 25)) (clobber (reg:HI 26)) (clobber (reg:CC REG_CC))])])

(define_insn “*mulpsi3.libgcc” [(set (reg:PSI 22) (mult:PSI (reg:PSI 22) (reg:PSI 18))) (clobber (reg:QI 21)) (clobber (reg:QI 25)) (clobber (reg:HI 26)) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “%~call __mulpsi3” [(set_attr “type” “xcall”)])

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;; 24-bit signed/unsigned division and modulo. ;; Notice that the libgcc implementation return the quotient in R22 ;; and the remainder in R18 whereas the 32-bit [u]divmodsi4 ;; implementation works the other way round.

(define_insn_and_split “divmodpsi4” [(parallel [(set (match_operand:PSI 0 “pseudo_register_operand” "") (div:PSI (match_operand:PSI 1 “pseudo_register_operand” "") (match_operand:PSI 2 “pseudo_register_operand” ""))) (set (match_operand:PSI 3 “pseudo_register_operand” "") (mod:PSI (match_dup 1) (match_dup 2))) (clobber (reg:DI 18)) (clobber (reg:QI 26))])] "" { gcc_unreachable(); } "" [(set (reg:PSI 22) (match_dup 1)) (set (reg:PSI 18) (match_dup 2)) (parallel [(set (reg:PSI 22) (div:PSI (reg:PSI 22) (reg:PSI 18))) (set (reg:PSI 18) (mod:PSI (reg:PSI 22) (reg:PSI 18))) (clobber (reg:QI 21)) (clobber (reg:QI 25)) (clobber (reg:QI 26))]) (set (match_dup 0) (reg:PSI 22)) (set (match_dup 3) (reg:PSI 18))])

(define_insn_and_split “*divmodpsi4_call_split” [(set (reg:PSI 22) (div:PSI (reg:PSI 22) (reg:PSI 18))) (set (reg:PSI 18) (mod:PSI (reg:PSI 22) (reg:PSI 18))) (clobber (reg:QI 21)) (clobber (reg:QI 25)) (clobber (reg:QI 26))] "" “#” “&& reload_completed” [(parallel [(set (reg:PSI 22) (div:PSI (reg:PSI 22) (reg:PSI 18))) (set (reg:PSI 18) (mod:PSI (reg:PSI 22) (reg:PSI 18))) (clobber (reg:QI 21)) (clobber (reg:QI 25)) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))])])

(define_insn “*divmodpsi4_call” [(set (reg:PSI 22) (div:PSI (reg:PSI 22) (reg:PSI 18))) (set (reg:PSI 18) (mod:PSI (reg:PSI 22) (reg:PSI 18))) (clobber (reg:QI 21)) (clobber (reg:QI 25)) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __divmodpsi4” [(set_attr “type” “xcall”)])

(define_insn_and_split “udivmodpsi4” [(parallel [(set (match_operand:PSI 0 “pseudo_register_operand” "") (udiv:PSI (match_operand:PSI 1 “pseudo_register_operand” "") (match_operand:PSI 2 “pseudo_register_operand” ""))) (set (match_operand:PSI 3 “pseudo_register_operand” "") (umod:PSI (match_dup 1) (match_dup 2))) (clobber (reg:DI 18)) (clobber (reg:QI 26))])] "" { gcc_unreachable(); } "" [(set (reg:PSI 22) (match_dup 1)) (set (reg:PSI 18) (match_dup 2)) (parallel [(set (reg:PSI 22) (udiv:PSI (reg:PSI 22) (reg:PSI 18))) (set (reg:PSI 18) (umod:PSI (reg:PSI 22) (reg:PSI 18))) (clobber (reg:QI 21)) (clobber (reg:QI 25)) (clobber (reg:QI 26))]) (set (match_dup 0) (reg:PSI 22)) (set (match_dup 3) (reg:PSI 18))])

(define_insn_and_split “*udivmodpsi4_call_split” [(set (reg:PSI 22) (udiv:PSI (reg:PSI 22) (reg:PSI 18))) (set (reg:PSI 18) (umod:PSI (reg:PSI 22) (reg:PSI 18))) (clobber (reg:QI 21)) (clobber (reg:QI 25)) (clobber (reg:QI 26))] "" “#” “&& reload_completed” [(parallel [(set (reg:PSI 22) (udiv:PSI (reg:PSI 22) (reg:PSI 18))) (set (reg:PSI 18) (umod:PSI (reg:PSI 22) (reg:PSI 18))) (clobber (reg:QI 21)) (clobber (reg:QI 25)) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))])])

(define_insn “*udivmodpsi4_call” [(set (reg:PSI 22) (udiv:PSI (reg:PSI 22) (reg:PSI 18))) (set (reg:PSI 18) (umod:PSI (reg:PSI 22) (reg:PSI 18))) (clobber (reg:QI 21)) (clobber (reg:QI 25)) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __udivmodpsi4” [(set_attr “type” “xcall”)])

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

(define_insn_and_split “divmodsi4” [(parallel [(set (match_operand:SI 0 “pseudo_register_operand” "") (div:SI (match_operand:SI 1 “pseudo_register_operand” "") (match_operand:SI 2 “pseudo_register_operand” ""))) (set (match_operand:SI 3 “pseudo_register_operand” "") (mod:SI (match_dup 1) (match_dup 2))) (clobber (reg:SI 18)) (clobber (reg:SI 22)) (clobber (reg:HI 26)) (clobber (reg:HI 30))])] "" “this divmodsi4 pattern should have been splitted;” "" [(set (reg:SI 22) (match_dup 1)) (set (reg:SI 18) (match_dup 2)) (parallel [(set (reg:SI 18) (div:SI (reg:SI 22) (reg:SI 18))) (set (reg:SI 22) (mod:SI (reg:SI 22) (reg:SI 18))) (clobber (reg:HI 26)) (clobber (reg:HI 30))]) (set (match_dup 0) (reg:SI 18)) (set (match_dup 3) (reg:SI 22))])

(define_insn_and_split “*divmodsi4_call_split” [(set (reg:SI 18) (div:SI (reg:SI 22) (reg:SI 18))) (set (reg:SI 22) (mod:SI (reg:SI 22) (reg:SI 18))) (clobber (reg:HI 26)) (clobber (reg:HI 30))] "" “#” “&& reload_completed” [(parallel [(set (reg:SI 18) (div:SI (reg:SI 22) (reg:SI 18))) (set (reg:SI 22) (mod:SI (reg:SI 22) (reg:SI 18))) (clobber (reg:HI 26)) (clobber (reg:HI 30)) (clobber (reg:CC REG_CC))])])

(define_insn “*divmodsi4_call” [(set (reg:SI 18) (div:SI (reg:SI 22) (reg:SI 18))) (set (reg:SI 22) (mod:SI (reg:SI 22) (reg:SI 18))) (clobber (reg:HI 26)) (clobber (reg:HI 30)) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __divmodsi4” [(set_attr “type” “xcall”)])

(define_insn_and_split “udivmodsi4” [(parallel [(set (match_operand:SI 0 “pseudo_register_operand” "") (udiv:SI (match_operand:SI 1 “pseudo_register_operand” "") (match_operand:SI 2 “pseudo_register_operand” ""))) (set (match_operand:SI 3 “pseudo_register_operand” "") (umod:SI (match_dup 1) (match_dup 2))) (clobber (reg:SI 18)) (clobber (reg:SI 22)) (clobber (reg:HI 26)) (clobber (reg:HI 30))])] "" “this udivmodsi4 pattern should have been splitted;” "" [(set (reg:SI 22) (match_dup 1)) (set (reg:SI 18) (match_dup 2)) (parallel [(set (reg:SI 18) (udiv:SI (reg:SI 22) (reg:SI 18))) (set (reg:SI 22) (umod:SI (reg:SI 22) (reg:SI 18))) (clobber (reg:HI 26)) (clobber (reg:HI 30))]) (set (match_dup 0) (reg:SI 18)) (set (match_dup 3) (reg:SI 22))])

(define_insn_and_split “*udivmodsi4_call_split” [(set (reg:SI 18) (udiv:SI (reg:SI 22) (reg:SI 18))) (set (reg:SI 22) (umod:SI (reg:SI 22) (reg:SI 18))) (clobber (reg:HI 26)) (clobber (reg:HI 30))] "" “#” “&& reload_completed” [(parallel [(set (reg:SI 18) (udiv:SI (reg:SI 22) (reg:SI 18))) (set (reg:SI 22) (umod:SI (reg:SI 22) (reg:SI 18))) (clobber (reg:HI 26)) (clobber (reg:HI 30)) (clobber (reg:CC REG_CC))])])

(define_insn “*udivmodsi4_call” [(set (reg:SI 18) (udiv:SI (reg:SI 22) (reg:SI 18))) (set (reg:SI 22) (umod:SI (reg:SI 22) (reg:SI 18))) (clobber (reg:HI 26)) (clobber (reg:HI 30)) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __udivmodsi4” [(set_attr “type” “xcall”)])

;&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&& ; and

(define_insn_and_split “andqi3” [(set (match_operand:QI 0 “register_operand” “=??r,d,*l”) (and:QI (match_operand:QI 1 “register_operand” “%0,0,0”) (match_operand:QI 2 “nonmemory_operand” “r,i,Ca1”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (and:QI (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*andqi3” [(set (match_operand:QI 0 “register_operand” “=??r,d,*l”) (and:QI (match_operand:QI 1 “register_operand” “%0,0,0”) (match_operand:QI 2 “nonmemory_operand” “r,i,Ca1”))) (clobber (reg:CC REG_CC))] “reload_completed” “@ and %0,%2 andi %0,lo8(%2) * return avr_out_bitop (insn, operands, NULL);” [(set_attr “length” “1,1,2”)])

(define_insn_and_split “andhi3” [(set (match_operand:HI 0 “register_operand” “=??r,d,d,r ,r”) (and:HI (match_operand:HI 1 “register_operand” “%0,0,0,0 ,0”) (match_operand:HI 2 “nonmemory_operand” “r,s,n,Ca2,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X ,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (and:HI (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*andhi3” [(set (match_operand:HI 0 “register_operand” “=??r,d,d,r ,r”) (and:HI (match_operand:HI 1 “register_operand” “%0,0,0,0 ,0”) (match_operand:HI 2 “nonmemory_operand” “r,s,n,Ca2,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X ,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { if (which_alternative == 0) return “and %A0,%A2;and %B0,%B2”; else if (which_alternative == 1) return “andi %A0,lo8(%2);andi %B0,hi8(%2)”;

return avr_out_bitop (insn, operands, NULL);

} [(set_attr “length” “2,2,2,4,4”) (set_attr “adjust_len” “,,out_bitop,out_bitop,out_bitop”)])

(define_insn_and_split “andpsi3” [(set (match_operand:PSI 0 “register_operand” “=??r,d,r ,r”) (and:PSI (match_operand:PSI 1 “register_operand” “%0,0,0 ,0”) (match_operand:PSI 2 “nonmemory_operand” “r,n,Ca3,n”))) (clobber (match_scratch:QI 3 “=X,X,X ,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (and:PSI (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*andpsi3” [(set (match_operand:PSI 0 “register_operand” “=??r,d,r ,r”) (and:PSI (match_operand:PSI 1 “register_operand” “%0,0,0 ,0”) (match_operand:PSI 2 “nonmemory_operand” “r,n,Ca3,n”))) (clobber (match_scratch:QI 3 “=X,X,X ,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { if (which_alternative == 0) return “and %A0,%A2” CR_TAB “and %B0,%B2” CR_TAB “and %C0,%C2”;

return avr_out_bitop (insn, operands, NULL);

} [(set_attr “length” “3,3,6,6”) (set_attr “adjust_len” “*,out_bitop,out_bitop,out_bitop”)])

(define_insn_and_split “andsi3” [(set (match_operand:SI 0 “register_operand” “=??r,d,r ,r”) (and:SI (match_operand:SI 1 “register_operand” “%0,0,0 ,0”) (match_operand:SI 2 “nonmemory_operand” “r,n,Ca4,n”))) (clobber (match_scratch:QI 3 “=X,X,X ,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (and:SI (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*andsi3” [(set (match_operand:SI 0 “register_operand” “=??r,d,r ,r”) (and:SI (match_operand:SI 1 “register_operand” “%0,0,0 ,0”) (match_operand:SI 2 “nonmemory_operand” “r,n,Ca4,n”))) (clobber (match_scratch:QI 3 “=X,X,X ,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { if (which_alternative == 0) return “and %0,%2” CR_TAB “and %B0,%B2” CR_TAB “and %C0,%C2” CR_TAB “and %D0,%D2”;

return avr_out_bitop (insn, operands, NULL);

} [(set_attr “length” “4,4,8,8”) (set_attr “adjust_len” “*,out_bitop,out_bitop,out_bitop”)])

(define_peephole2 ; andi [(parallel [(set (match_operand:QI 0 “d_register_operand” "") (and:QI (match_dup 0) (match_operand:QI 1 “const_int_operand” ""))) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 0) (and:QI (match_dup 0) (match_operand:QI 2 “const_int_operand” ""))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (match_dup 0) (and:QI (match_dup 0) (match_dup 1))) (clobber (reg:CC REG_CC))])] { operands[1] = GEN_INT (INTVAL (operands[1]) & INTVAL (operands[2])); })

;;||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||| ;; ior

(define_insn_and_split “iorqi3” [(set (match_operand:QI 0 “register_operand” “=??r,d,*l”) (ior:QI (match_operand:QI 1 “register_operand” “%0,0,0”) (match_operand:QI 2 “nonmemory_operand” “r,i,Co1”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ior:QI (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*iorqi3” [(set (match_operand:QI 0 “register_operand” “=??r,d,*l”) (ior:QI (match_operand:QI 1 “register_operand” “%0,0,0”) (match_operand:QI 2 “nonmemory_operand” “r,i,Co1”))) (clobber (reg:CC REG_CC))] “reload_completed” “@ or %0,%2 ori %0,lo8(%2) * return avr_out_bitop (insn, operands, NULL);” [(set_attr “length” “1,1,2”)])

(define_insn_and_split “iorhi3” [(set (match_operand:HI 0 “register_operand” “=??r,d,d,r ,r”) (ior:HI (match_operand:HI 1 “register_operand” “%0,0,0,0 ,0”) (match_operand:HI 2 “nonmemory_operand” “r,s,n,Co2,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X ,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ior:HI (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*iorhi3” [(set (match_operand:HI 0 “register_operand” “=??r,d,d,r ,r”) (ior:HI (match_operand:HI 1 “register_operand” “%0,0,0,0 ,0”) (match_operand:HI 2 “nonmemory_operand” “r,s,n,Co2,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X ,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { if (which_alternative == 0) return “or %A0,%A2;or %B0,%B2”; else if (which_alternative == 1) return “ori %A0,lo8(%2);ori %B0,hi8(%2)”;

return avr_out_bitop (insn, operands, NULL);

} [(set_attr “length” “2,2,2,4,4”) (set_attr “adjust_len” “,,out_bitop,out_bitop,out_bitop”)])

(define_insn_and_split “iorpsi3” [(set (match_operand:PSI 0 “register_operand” “=??r,d,r ,r”) (ior:PSI (match_operand:PSI 1 “register_operand” “%0,0,0 ,0”) (match_operand:PSI 2 “nonmemory_operand” “r,n,Co3,n”))) (clobber (match_scratch:QI 3 “=X,X,X ,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ior:PSI (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*iorpsi3” [(set (match_operand:PSI 0 “register_operand” “=??r,d,r ,r”) (ior:PSI (match_operand:PSI 1 “register_operand” “%0,0,0 ,0”) (match_operand:PSI 2 “nonmemory_operand” “r,n,Co3,n”))) (clobber (match_scratch:QI 3 “=X,X,X ,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { if (which_alternative == 0) return “or %A0,%A2” CR_TAB “or %B0,%B2” CR_TAB “or %C0,%C2”;

return avr_out_bitop (insn, operands, NULL);

} [(set_attr “length” “3,3,6,6”) (set_attr “adjust_len” “*,out_bitop,out_bitop,out_bitop”)])

(define_insn_and_split “iorsi3” [(set (match_operand:SI 0 “register_operand” “=??r,d,r ,r”) (ior:SI (match_operand:SI 1 “register_operand” “%0,0,0 ,0”) (match_operand:SI 2 “nonmemory_operand” “r,n,Co4,n”))) (clobber (match_scratch:QI 3 “=X,X,X ,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ior:SI (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*iorsi3” [(set (match_operand:SI 0 “register_operand” “=??r,d,r ,r”) (ior:SI (match_operand:SI 1 “register_operand” “%0,0,0 ,0”) (match_operand:SI 2 “nonmemory_operand” “r,n,Co4,n”))) (clobber (match_scratch:QI 3 “=X,X,X ,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { if (which_alternative == 0) return “or %0,%2” CR_TAB “or %B0,%B2” CR_TAB “or %C0,%C2” CR_TAB “or %D0,%D2”;

return avr_out_bitop (insn, operands, NULL);

} [(set_attr “length” “4,4,8,8”) (set_attr “adjust_len” “*,out_bitop,out_bitop,out_bitop”)])

;;^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ;; xor

(define_insn_and_split “xorqi3” [(set (match_operand:QI 0 “register_operand” “=r”) (xor:QI (match_operand:QI 1 “register_operand” “%0”) (match_operand:QI 2 “register_operand” “r”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (xor:QI (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*xorqi3” [(set (match_operand:QI 0 “register_operand” “=r”) (xor:QI (match_operand:QI 1 “register_operand” “%0”) (match_operand:QI 2 “register_operand” “r”))) (clobber (reg:CC REG_CC))] “reload_completed” “eor %0,%2” [(set_attr “length” “1”)])

(define_insn_and_split “xorhi3” [(set (match_operand:HI 0 “register_operand” “=??r,r ,r”) (xor:HI (match_operand:HI 1 “register_operand” “%0,0 ,0”) (match_operand:HI 2 “nonmemory_operand” “r,Cx2,n”))) (clobber (match_scratch:QI 3 “=X,X ,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (xor:HI (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*xorhi3” [(set (match_operand:HI 0 “register_operand” “=??r,r ,r”) (xor:HI (match_operand:HI 1 “register_operand” “%0,0 ,0”) (match_operand:HI 2 “nonmemory_operand” “r,Cx2,n”))) (clobber (match_scratch:QI 3 “=X,X ,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { if (which_alternative == 0) return “eor %A0,%A2;eor %B0,%B2”;

return avr_out_bitop (insn, operands, NULL);

} [(set_attr “length” “2,2,4”) (set_attr “adjust_len” “*,out_bitop,out_bitop”)])

(define_insn_and_split “xorpsi3” [(set (match_operand:PSI 0 “register_operand” “=??r,r ,r”) (xor:PSI (match_operand:PSI 1 “register_operand” “%0,0 ,0”) (match_operand:PSI 2 “nonmemory_operand” “r,Cx3,n”))) (clobber (match_scratch:QI 3 “=X,X ,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (xor:PSI (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*xorpsi3” [(set (match_operand:PSI 0 “register_operand” “=??r,r ,r”) (xor:PSI (match_operand:PSI 1 “register_operand” “%0,0 ,0”) (match_operand:PSI 2 “nonmemory_operand” “r,Cx3,n”))) (clobber (match_scratch:QI 3 “=X,X ,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { if (which_alternative == 0) return “eor %A0,%A2” CR_TAB “eor %B0,%B2” CR_TAB “eor %C0,%C2”;

return avr_out_bitop (insn, operands, NULL);

} [(set_attr “length” “3,6,6”) (set_attr “adjust_len” “*,out_bitop,out_bitop”)])

(define_insn_and_split “xorsi3” [(set (match_operand:SI 0 “register_operand” “=??r,r ,r”) (xor:SI (match_operand:SI 1 “register_operand” “%0,0 ,0”) (match_operand:SI 2 “nonmemory_operand” “r,Cx4,n”))) (clobber (match_scratch:QI 3 “=X,X ,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (xor:SI (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*xorsi3” [(set (match_operand:SI 0 “register_operand” “=??r,r ,r”) (xor:SI (match_operand:SI 1 “register_operand” “%0,0 ,0”) (match_operand:SI 2 “nonmemory_operand” “r,Cx4,n”))) (clobber (match_scratch:QI 3 “=X,X ,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { if (which_alternative == 0) return “eor %0,%2” CR_TAB “eor %B0,%B2” CR_TAB “eor %C0,%C2” CR_TAB “eor %D0,%D2”;

return avr_out_bitop (insn, operands, NULL);

} [(set_attr “length” “4,8,8”) (set_attr “adjust_len” “*,out_bitop,out_bitop”)])

(define_split [(set (match_operand:SPLIT34 0 “register_operand”) (match_operand:SPLIT34 1 “register_operand”))] “optimize && reload_completed” [(set (match_dup 2) (match_dup 3)) (set (match_dup 4) (match_dup 5))] { machine_mode mode_hi = 4 == GET_MODE_SIZE (mode) ? HImode : QImode; bool lo_first = REGNO (operands[0]) < REGNO (operands[1]); rtx dst_lo = simplify_gen_subreg (HImode, operands[0], mode, 0); rtx src_lo = simplify_gen_subreg (HImode, operands[1], mode, 0); rtx dst_hi = simplify_gen_subreg (mode_hi, operands[0], mode, 2); rtx src_hi = simplify_gen_subreg (mode_hi, operands[1], mode, 2);

operands[2] = lo_first ? dst_lo : dst_hi;
operands[3] = lo_first ? src_lo : src_hi;
operands[4] = lo_first ? dst_hi : dst_lo;
operands[5] = lo_first ? src_hi : src_lo;

})

(define_split [(set (match_operand:HI 0 “register_operand”) (match_operand:HI 1 “reg_or_0_operand”))] “optimize && reload_completed && GENERAL_REG_P (operands[0]) && (operands[1] == const0_rtx || GENERAL_REG_P (operands[1])) && (!AVR_HAVE_MOVW || const0_rtx == operands[1])” [(set (match_dup 2) (match_dup 3)) (set (match_dup 4) (match_dup 5))] { operands[2] = simplify_gen_subreg (QImode, operands[0], HImode, 1); operands[3] = simplify_gen_subreg (QImode, operands[1], HImode, 1); operands[4] = simplify_gen_subreg (QImode, operands[0], HImode, 0); operands[5] = simplify_gen_subreg (QImode, operands[1], HImode, 0); })

;; Split andhi3, andpsi3, andsi3. ;; Split iorhi3, iorpsi3, iorsi3. ;; Split xorhi3, xorpsi3, xorsi3. (define_split [(parallel [(set (match_operand:HISI 0 “register_operand”) (bitop:HISI (match_dup 0) (match_operand:HISI 1 “register_operand”))) (clobber (scratch:QI))])] “optimize && reload_completed” [(const_int 1)] { for (int i = 0; i < GET_MODE_SIZE (mode); i++) { rtx dst = simplify_gen_subreg (QImode, operands[0], mode, i); rtx src = simplify_gen_subreg (QImode, operands[1], mode, i); emit_insn (gen_qi3 (dst, dst, src)); } DONE; })

;; swap swap swap swap swap swap swap swap swap swap swap swap swap swap swap ;; swap

(define_expand “rotlqi3” [(set (match_operand:QI 0 “register_operand” "") (rotate:QI (match_operand:QI 1 “register_operand” "") (match_operand:QI 2 “const_0_to_7_operand” "")))] "" { if (!CONST_INT_P (operands[2])) FAIL;

operands[2] = gen_int_mode (INTVAL (operands[2]) & 7, QImode);

})

;; Expander used by __builtin_avr_swap (define_expand “rotlqi3_4” [(set (match_operand:QI 0 “register_operand” "") (rotate:QI (match_operand:QI 1 “register_operand” "") (const_int 4)))])

(define_insn_and_split “*rotlqi3_split” [(set (match_operand:QI 0 “register_operand” “=r,r,r ,r ,r ,r ,r ,r”) (rotate:QI (match_operand:QI 1 “register_operand” “0,0,0 ,0 ,0 ,0 ,0 ,0”) (match_operand:QI 2 “const_0_to_7_operand” “P,K,C03,C04,C05,C06,C07,L”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (rotate:QI (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*rotlqi3” [(set (match_operand:QI 0 “register_operand” “=r,r,r ,r ,r ,r ,r ,r”) (rotate:QI (match_operand:QI 1 “register_operand” “0,0,0 ,0 ,0 ,0 ,0 ,0”) (match_operand:QI 2 “const_0_to_7_operand” “P,K,C03,C04,C05,C06,C07,L”))) (clobber (reg:CC REG_CC))] “reload_completed” "@ lsl %0;adc %0,zero_reg lsl %0;adc %0,zero_reg;lsl %0;adc %0,zero_reg swap %0;bst %0,0;ror %0;bld %0,7 swap %0 swap %0;lsl %0;adc %0,zero_reg swap %0;lsl %0;adc %0,zero_reg;lsl %0;adc %0,zero_reg bst %0,0;ror %0;bld %0,7 " ; empty [(set_attr “length” “2,4,4,1,3,5,3,0”)])

;; Split all rotates of HI,SI and PSImode registers where rotation is by ;; a whole number of bytes. The split creates the appropriate moves and ;; considers all overlap situations.

;; HImode does not need scratch. Use attribute for this constraint.

(define_mode_attr rotx [(SI “&r,&r,X”) (PSI “&r,&r,X”) (HI “X,X,X”)]) (define_mode_attr rotsmode [(SI “HI”) (PSI “QI”) (HI “QI”)])

;; “rotlhi3” ;; “rotlpsi3” ;; “rotlsi3” (define_expand “rotl3” [(parallel [(set (match_operand:HISI 0 “register_operand” "") (rotate:HISI (match_operand:HISI 1 “register_operand” "") (match_operand:HISI 2 “const_int_operand” ""))) (clobber (match_dup 3))])] "" { int offset;

if (!CONST_INT_P (operands[2]))
  FAIL;

offset = INTVAL (operands[2]);

if (0 == offset % 8)
  {
    if (AVR_HAVE_MOVW && 0 == offset % 16)
      operands[3] = gen_rtx_SCRATCH (<rotsmode>mode);
    else
      operands[3] = gen_rtx_SCRATCH (QImode);
  }
else if (offset == 1
         || offset == GET_MODE_BITSIZE (<MODE>mode) -1)
  {
    /*; Support rotate left/right by 1  */

    emit_move_insn (operands[0],
                    gen_rtx_ROTATE (<MODE>mode, operands[1], operands[2]));
    DONE;
  }
else
  FAIL;

})

(define_insn_and_split “*rotlhi2.1_split” [(set (match_operand:HI 0 “register_operand” “=r”) (rotate:HI (match_operand:HI 1 “register_operand” “0”) (const_int 1)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (rotate:HI (match_dup 1) (const_int 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*rotlhi2.1” [(set (match_operand:HI 0 “register_operand” “=r”) (rotate:HI (match_operand:HI 1 “register_operand” “0”) (const_int 1))) (clobber (reg:CC REG_CC))] “reload_completed” “lsl %A0;rol %B0;adc %A0,zero_reg” [(set_attr “length” “3”)])

(define_insn_and_split “*rotlhi2.15_split” [(set (match_operand:HI 0 “register_operand” “=r”) (rotate:HI (match_operand:HI 1 “register_operand” “0”) (const_int 15)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (rotate:HI (match_dup 1) (const_int 15))) (clobber (reg:CC REG_CC))])])

(define_insn “*rotlhi2.15” [(set (match_operand:HI 0 “register_operand” “=r”) (rotate:HI (match_operand:HI 1 “register_operand” “0”) (const_int 15))) (clobber (reg:CC REG_CC))] “reload_completed” “bst %A0,0;ror %B0;ror %A0;bld %B0,7” [(set_attr “length” “4”)])

(define_insn_and_split “*rotlpsi2.1_split” [(set (match_operand:PSI 0 “register_operand” “=r”) (rotate:PSI (match_operand:PSI 1 “register_operand” “0”) (const_int 1)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (rotate:PSI (match_dup 1) (const_int 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*rotlpsi2.1” [(set (match_operand:PSI 0 “register_operand” “=r”) (rotate:PSI (match_operand:PSI 1 “register_operand” “0”) (const_int 1))) (clobber (reg:CC REG_CC))] “reload_completed” “lsl %A0;rol %B0;rol %C0;adc %A0,zero_reg” [(set_attr “length” “4”)])

(define_insn_and_split “*rotlpsi2.23_split” [(set (match_operand:PSI 0 “register_operand” “=r”) (rotate:PSI (match_operand:PSI 1 “register_operand” “0”) (const_int 23)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (rotate:PSI (match_dup 1) (const_int 23))) (clobber (reg:CC REG_CC))])])

(define_insn “*rotlpsi2.23” [(set (match_operand:PSI 0 “register_operand” “=r”) (rotate:PSI (match_operand:PSI 1 “register_operand” “0”) (const_int 23))) (clobber (reg:CC REG_CC))] “reload_completed” “bst %A0,0;ror %C0;ror %B0;ror %A0;bld %C0,7” [(set_attr “length” “5”)])

(define_insn_and_split “*rotlsi2.1_split” [(set (match_operand:SI 0 “register_operand” “=r”) (rotate:SI (match_operand:SI 1 “register_operand” “0”) (const_int 1)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (rotate:SI (match_dup 1) (const_int 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*rotlsi2.1” [(set (match_operand:SI 0 “register_operand” “=r”) (rotate:SI (match_operand:SI 1 “register_operand” “0”) (const_int 1))) (clobber (reg:CC REG_CC))] “reload_completed” “lsl %A0;rol %B0;rol %C0;rol %D0;adc %A0,zero_reg” [(set_attr “length” “5”)])

(define_insn_and_split “*rotlsi2.31_split” [(set (match_operand:SI 0 “register_operand” “=r”) (rotate:SI (match_operand:SI 1 “register_operand” “0”) (const_int 31)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (rotate:SI (match_dup 1) (const_int 31))) (clobber (reg:CC REG_CC))])])

(define_insn “*rotlsi2.31” [(set (match_operand:SI 0 “register_operand” “=r”) (rotate:SI (match_operand:SI 1 “register_operand” “0”) (const_int 31))) (clobber (reg:CC REG_CC))] “reload_completed” “bst %A0,0;ror %D0;ror %C0;ror %B0;ror %A0;bld %D0,7” [(set_attr “length” “6”)])

;; Overlapping non-HImode registers often (but not always) need a scratch. ;; The best we can do is use early clobber alternative “#&r” so that ;; completely non-overlapping operands dont get a scratch but # so register ;; allocation does not prefer non-overlapping.

;; Split word aligned rotates using scratch that is mode dependent.

;; “*rotwhi” ;; “*rotwsi” (define_insn_and_split “*rotw” [(set (match_operand:HISI 0 “register_operand” “=r,r,#&r”) (rotate:HISI (match_operand:HISI 1 “register_operand” “0,r,r”) (match_operand 2 “const_int_operand” “n,n,n”))) (clobber (match_scratch: 3 “=”))] “AVR_HAVE_MOVW && CONST_INT_P (operands[2]) && GET_MODE_SIZE (mode) % 2 == 0 && 0 == INTVAL (operands[2]) % 16” “#” “&& reload_completed” [(const_int 0)] { avr_rotate_bytes (operands); DONE; })

;; Split byte aligned rotates using scratch that is always QI mode.

;; “*rotbhi” ;; “*rotbpsi” ;; “*rotbsi” (define_insn_and_split “*rotb” [(set (match_operand:HISI 0 “register_operand” “=r,r,#&r”) (rotate:HISI (match_operand:HISI 1 “register_operand” “0,r,r”) (match_operand 2 “const_int_operand” “n,n,n”))) (clobber (match_scratch:QI 3 “=”))] “CONST_INT_P (operands[2]) && (8 == INTVAL (operands[2]) % 16 || ((!AVR_HAVE_MOVW || GET_MODE_SIZE (mode) % 2 != 0) && 0 == INTVAL (operands[2]) % 16))” “#” “&& reload_completed” [(const_int 0)] { avr_rotate_bytes (operands); DONE; })

;;<< << << << << << << << << << << << << << << << << << << << << << << << << << ;; arithmetic shift left

;; “ashlqi3” ;; “ashlqq3” “ashluqq3” (define_expand “ashl3” [(set (match_operand:ALL1 0 “register_operand” "") (ashift:ALL1 (match_operand:ALL1 1 “register_operand” "") (match_operand:QI 2 “nop_general_operand” "")))])

(define_split ; ashlqi3_const4 [(set (match_operand:ALL1 0 “d_register_operand” "") (ashift:ALL1 (match_dup 0) (const_int 4)))] "" [(set (match_dup 1) (rotate:QI (match_dup 1) (const_int 4))) (set (match_dup 1) (and:QI (match_dup 1) (const_int -16)))] { operands[1] = avr_to_int_mode (operands[0]); })

(define_split ; ashlqi3_const5 [(set (match_operand:ALL1 0 “d_register_operand” "") (ashift:ALL1 (match_dup 0) (const_int 5)))] "" [(set (match_dup 1) (rotate:QI (match_dup 1) (const_int 4))) (set (match_dup 1) (ashift:QI (match_dup 1) (const_int 1))) (set (match_dup 1) (and:QI (match_dup 1) (const_int -32)))] { operands[1] = avr_to_int_mode (operands[0]); })

(define_split ; ashlqi3_const6 [(set (match_operand:ALL1 0 “d_register_operand” "") (ashift:ALL1 (match_dup 0) (const_int 6)))] "" [(set (match_dup 1) (rotate:QI (match_dup 1) (const_int 4))) (set (match_dup 1) (ashift:QI (match_dup 1) (const_int 2))) (set (match_dup 1) (and:QI (match_dup 1) (const_int -64)))] { operands[1] = avr_to_int_mode (operands[0]); })

;; “*ashlqi3” ;; “*ashlqq3” “*ashluqq3” (define_insn_and_split “*ashl3_split” [(set (match_operand:ALL1 0 “register_operand” “=r,r,r,r,!d,r,r”) (ashift:ALL1 (match_operand:ALL1 1 “register_operand” “0,0,0,0,0 ,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,K,n ,n,Qm”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ashift:ALL1 (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*ashl3” [(set (match_operand:ALL1 0 “register_operand” “=r,r,r,r,!d,r,r”) (ashift:ALL1 (match_operand:ALL1 1 “register_operand” “0,0,0,0,0 ,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,K,n ,n,Qm”))) (clobber (reg:CC REG_CC))] “reload_completed” { return ashlqi3_out (insn, operands, NULL); } [(set_attr “length” “5,0,1,2,4,6,9”) (set_attr “adjust_len” “ashlqi”)])

(define_insn_and_split “ashl3” [(set (match_operand:ALL2 0 “register_operand” “=r,r,r,r,r,r,r”) (ashift:ALL2 (match_operand:ALL2 1 “register_operand” “0,0,0,r,0,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,O,K,n,Qm”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ashift:ALL2 (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*ashl3” [(set (match_operand:ALL2 0 “register_operand” “=r,r,r,r,r,r,r”) (ashift:ALL2 (match_operand:ALL2 1 “register_operand” “0,0,0,r,0,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,O,K,n,Qm”))) (clobber (reg:CC REG_CC))] “reload_completed” { return ashlhi3_out (insn, operands, NULL); } [(set_attr “length” “6,0,2,2,4,10,10”) (set_attr “adjust_len” “ashlhi”)])

;; Insns like the following are generated when (implicitly) extending 8-bit shifts ;; like char1 = char2 << char3. Only the low-byte is needed in that situation.

;; “*ashluqihiqi3” ;; “*ashlsqihiqi3” (define_insn_and_split “*ashl<extend_su>qihiqi3” [(set (match_operand:QI 0 “register_operand” “=r”) (subreg:QI (ashift:HI (any_extend:HI (match_operand:QI 1 “register_operand” “0”)) (match_operand:QI 2 “register_operand” “r”)) 0))] "" “#” "" [(set (match_dup 0) (ashift:QI (match_dup 1) (match_dup 2)))])

;; ??? Combiner does not recognize that it could split the following insn; ;; presumably because he has no register handy?

;; “*ashluqihiqi3.mem” ;; “*ashlsqihiqi3.mem” (define_insn_and_split “*ashl<extend_su>qihiqi3.mem” [(set (match_operand:QI 0 “memory_operand” “=m”) (subreg:QI (ashift:HI (any_extend:HI (match_operand:QI 1 “register_operand” “r”)) (match_operand:QI 2 “register_operand” “r”)) 0))] “!reload_completed” { gcc_unreachable(); } “&& 1” [(set (match_dup 3) (ashift:QI (match_dup 1) (match_dup 2))) (set (match_dup 0) (match_dup 3))] { operands[3] = gen_reg_rtx (QImode); })

;; Similar.

(define_insn_and_split “*ashlhiqi3” [(set (match_operand:QI 0 “nonimmediate_operand” “=r”) (subreg:QI (ashift:HI (match_operand:HI 1 “register_operand” “0”) (match_operand:QI 2 “register_operand” “r”)) 0))] “!reload_completed” { gcc_unreachable(); } “&& 1” [(set (match_dup 4) (ashift:QI (match_dup 3) (match_dup 2))) (set (match_dup 0) (match_dup 4))] { operands[3] = simplify_gen_subreg (QImode, operands[1], HImode, 0); operands[4] = gen_reg_rtx (QImode); })

;; High part of 16-bit shift is unused after the instruction: ;; No need to compute it, map to 8-bit shift.

(define_peephole2 [(parallel [(set (match_operand:HI 0 “register_operand” "") (ashift:HI (match_dup 0) (match_operand:QI 1 “register_operand” ""))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (match_dup 2) (ashift:QI (match_dup 2) (match_dup 1))) (clobber (reg:CC REG_CC))]) (clobber (match_dup 3))] { operands[3] = simplify_gen_subreg (QImode, operands[0], HImode, 1);

if (!peep2_reg_dead_p (1, operands[3]))
  FAIL;

operands[2] = simplify_gen_subreg (QImode, operands[0], HImode, 0);

})

;; “ashlsi3” ;; “ashlsq3” “ashlusq3” ;; “ashlsa3” “ashlusa3” (define_insn_and_split “ashl3” [(set (match_operand:ALL4 0 “register_operand” “=r,r,r,r,r,r,r”) (ashift:ALL4 (match_operand:ALL4 1 “register_operand” “0,0,0,r,0,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,O,K,n,Qm”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ashift:ALL4 (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*ashl3” [(set (match_operand:ALL4 0 “register_operand” “=r,r,r,r,r,r,r”) (ashift:ALL4 (match_operand:ALL4 1 “register_operand” “0,0,0,r,0,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,O,K,n,Qm”))) (clobber (reg:CC REG_CC))] “reload_completed” { return ashlsi3_out (insn, operands, NULL); } [(set_attr “length” “8,0,4,4,8,10,12”) (set_attr “adjust_len” “ashlsi”)])

;; Optimize if a scratch register from LD_REGS happens to be available.

(define_peephole2 ; ashlqi3_l_const4 [(parallel [(set (match_operand:ALL1 0 “l_register_operand” "") (ashift:ALL1 (match_dup 0) (const_int 4))) (clobber (reg:CC REG_CC))]) (match_scratch:QI 1 “d”)] "" [(parallel [(set (match_dup 2) (rotate:QI (match_dup 2) (const_int 4))) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 1) (const_int -16)) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 2) (and:QI (match_dup 2) (match_dup 1))) (clobber (reg:CC REG_CC))])] { operands[2] = avr_to_int_mode (operands[0]); })

(define_peephole2 ; ashlqi3_l_const5 [(parallel [(set (match_operand:ALL1 0 “l_register_operand” "") (ashift:ALL1 (match_dup 0) (const_int 5))) (clobber (reg:CC REG_CC))]) (match_scratch:QI 1 “d”)] "" [(parallel [(set (match_dup 2) (rotate:QI (match_dup 2) (const_int 4))) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 2) (ashift:QI (match_dup 2) (const_int 1))) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 1) (const_int -32)) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 2) (and:QI (match_dup 2) (match_dup 1))) (clobber (reg:CC REG_CC))])] { operands[2] = avr_to_int_mode (operands[0]); })

(define_peephole2 ; ashlqi3_l_const6 [(parallel [(set (match_operand:ALL1 0 “l_register_operand” "") (ashift:ALL1 (match_dup 0) (const_int 6))) (clobber (reg:CC REG_CC))]) (match_scratch:QI 1 “d”)] "" [(parallel [(set (match_dup 2) (rotate:QI (match_dup 2) (const_int 4))) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 2) (ashift:QI (match_dup 2) (const_int 2))) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 1) (const_int -64)) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 2) (and:QI (match_dup 2) (match_dup 1))) (clobber (reg:CC REG_CC))])] { operands[2] = avr_to_int_mode (operands[0]); })

(define_peephole2 [(match_scratch:QI 3 “d”) (parallel [(set (match_operand:ALL2 0 “register_operand” "") (ashift:ALL2 (match_operand:ALL2 1 “register_operand” "") (match_operand:QI 2 “const_int_operand” ""))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (match_dup 0) (ashift:ALL2 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

;; “*ashlhi3_const” ;; “*ashlhq3_const” “*ashluhq3_const” ;; “*ashlha3_const” “*ashluha3_const” (define_insn_and_split “*ashl3_const_split” [(set (match_operand:ALL2 0 “register_operand” “=r,r,r,r,r”) (ashift:ALL2 (match_operand:ALL2 1 “register_operand” “0,0,r,0,0”) (match_operand:QI 2 “const_int_operand” “L,P,O,K,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X,&d”))] “reload_completed” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ashift:ALL2 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*ashl3_const” [(set (match_operand:ALL2 0 “register_operand” “=r,r,r,r,r”) (ashift:ALL2 (match_operand:ALL2 1 “register_operand” “0,0,r,0,0”) (match_operand:QI 2 “const_int_operand” “L,P,O,K,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return ashlhi3_out (insn, operands, NULL); } [(set_attr “length” “0,2,2,4,10”) (set_attr “adjust_len” “ashlhi”)])

(define_peephole2 [(match_scratch:QI 3 “d”) (parallel [(set (match_operand:ALL4 0 “register_operand” "") (ashift:ALL4 (match_operand:ALL4 1 “register_operand” "") (match_operand:QI 2 “const_int_operand” ""))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (match_dup 0) (ashift:ALL4 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

;; “*ashlsi3_const” ;; “*ashlsq3_const” “*ashlusq3_const” ;; “*ashlsa3_const” “*ashlusa3_const” (define_insn_and_split “*ashl3_const_split” [(set (match_operand:ALL4 0 “register_operand” “=r,r,r,r”) (ashift:ALL4 (match_operand:ALL4 1 “register_operand” “0,0,r,0”) (match_operand:QI 2 “const_int_operand” “L,P,O,n”))) (clobber (match_scratch:QI 3 “=X,X,X,&d”))] “reload_completed” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ashift:ALL4 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*ashl3_const” [(set (match_operand:ALL4 0 “register_operand” “=r,r,r,r”) (ashift:ALL4 (match_operand:ALL4 1 “register_operand” “0,0,r,0”) (match_operand:QI 2 “const_int_operand” “L,P,O,n”))) (clobber (match_scratch:QI 3 “=X,X,X,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return ashlsi3_out (insn, operands, NULL); } [(set_attr “length” “0,4,4,10”) (set_attr “adjust_len” “ashlsi”)])

(define_expand “ashlpsi3” [(parallel [(set (match_operand:PSI 0 “register_operand” "") (ashift:PSI (match_operand:PSI 1 “register_operand” "") (match_operand:QI 2 “nonmemory_operand” ""))) (clobber (scratch:QI))])] "" { if (AVR_HAVE_MUL && CONST_INT_P (operands[2])) { if (IN_RANGE (INTVAL (operands[2]), 3, 6)) { rtx xoffset = force_reg (QImode, gen_int_mode (1 << INTVAL (operands[2]), QImode)); emit_insn (gen_mulsqipsi3 (operands[0], xoffset, operands[1])); DONE; } else if (optimize_insn_for_speed_p () && INTVAL (operands[2]) != 16 && IN_RANGE (INTVAL (operands[2]), 9, 22)) { rtx xoffset = force_reg (PSImode, gen_int_mode (1 << INTVAL (operands[2]), PSImode)); emit_insn (gen_mulpsi3 (operands[0], operands[1], xoffset)); DONE; } } })

(define_insn_and_split “*ashlpsi3_split” [(set (match_operand:PSI 0 “register_operand” “=r,r,r,r”) (ashift:PSI (match_operand:PSI 1 “register_operand” “0,0,r,0”) (match_operand:QI 2 “nonmemory_operand” “r,P,O,n”))) (clobber (match_scratch:QI 3 “=X,X,X,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ashift:PSI (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*ashlpsi3” [(set (match_operand:PSI 0 “register_operand” “=r,r,r,r”) (ashift:PSI (match_operand:PSI 1 “register_operand” “0,0,r,0”) (match_operand:QI 2 “nonmemory_operand” “r,P,O,n”))) (clobber (match_scratch:QI 3 “=X,X,X,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_ashlpsi3 (insn, operands, NULL); } [(set_attr “adjust_len” “ashlpsi”)])

;; >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> ;; arithmetic shift right

;; “ashrqi3” ;; “ashrqq3” “ashruqq3” (define_insn_and_split “ashr3” [(set (match_operand:ALL1 0 “register_operand” “=r,r,r,r,r ,r ,r”) (ashiftrt:ALL1 (match_operand:ALL1 1 “register_operand” “0,0,0,0,0 ,0 ,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,K,C03 C04 C05,C06 C07,Qm”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ashiftrt:ALL1 (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*ashr3” [(set (match_operand:ALL1 0 “register_operand” “=r,r,r,r,r ,r ,r”) (ashiftrt:ALL1 (match_operand:ALL1 1 “register_operand” “0,0,0,0,0 ,0 ,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,K,C03 C04 C05,C06 C07,Qm”))) (clobber (reg:CC REG_CC))] “reload_completed” { return ashrqi3_out (insn, operands, NULL); } [(set_attr “length” “5,0,1,2,5,4,9”) (set_attr “adjust_len” “ashrqi”)])

;; “ashrhi3” ;; “ashrhq3” “ashruhq3” ;; “ashrha3” “ashruha3” (define_insn_and_split “ashr3” [(set (match_operand:ALL2 0 “register_operand” “=r,r,r,r,r,r,r”) (ashiftrt:ALL2 (match_operand:ALL2 1 “register_operand” “0,0,0,r,0,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,O,K,n,Qm”)))] "" “#” “&& reload_completed” [(parallel [(set (match_operand:ALL2 0 “register_operand” “=r,r,r,r,r,r,r”) (ashiftrt:ALL2 (match_operand:ALL2 1 “register_operand” “0,0,0,r,0,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,O,K,n,Qm”))) (clobber (reg:CC REG_CC))])])

(define_insn “*ashr3” [(set (match_operand:ALL2 0 “register_operand” “=r,r,r,r,r,r,r”) (ashiftrt:ALL2 (match_operand:ALL2 1 “register_operand” “0,0,0,r,0,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,O,K,n,Qm”))) (clobber (reg:CC REG_CC))] “reload_completed” { return ashrhi3_out (insn, operands, NULL); } [(set_attr “length” “6,0,2,4,4,10,10”) (set_attr “adjust_len” “ashrhi”)])

(define_insn_and_split “ashrpsi3” [(set (match_operand:PSI 0 “register_operand” “=r,r,r,r,r”) (ashiftrt:PSI (match_operand:PSI 1 “register_operand” “0,0,0,r,0”) (match_operand:QI 2 “nonmemory_operand” “r,P,K,O,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ashiftrt:PSI (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*ashrpsi3” [(set (match_operand:PSI 0 “register_operand” “=r,r,r,r,r”) (ashiftrt:PSI (match_operand:PSI 1 “register_operand” “0,0,0,r,0”) (match_operand:QI 2 “nonmemory_operand” “r,P,K,O,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_ashrpsi3 (insn, operands, NULL); } [(set_attr “adjust_len” “ashrpsi”)])

;; “ashrsi3” ;; “ashrsq3” “ashrusq3” ;; “ashrsa3” “ashrusa3” (define_insn_and_split “ashr3” [(set (match_operand:ALL4 0 “register_operand” “=r,r,r,r,r,r,r”) (ashiftrt:ALL4 (match_operand:ALL4 1 “register_operand” “0,0,0,r,0,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,O,K,n,Qm”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ashiftrt:ALL4 (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*ashr3” [(set (match_operand:ALL4 0 “register_operand” “=r,r,r,r,r,r,r”) (ashiftrt:ALL4 (match_operand:ALL4 1 “register_operand” “0,0,0,r,0,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,O,K,n,Qm”))) (clobber (reg:CC REG_CC))] “reload_completed” { return ashrsi3_out (insn, operands, NULL); } [(set_attr “length” “8,0,4,6,8,10,12”) (set_attr “adjust_len” “ashrsi”)])

;; Optimize if a scratch register from LD_REGS happens to be available.

(define_peephole2 [(match_scratch:QI 3 “d”) (parallel [(set (match_operand:ALL2 0 “register_operand” "") (ashiftrt:ALL2 (match_operand:ALL2 1 “register_operand” "") (match_operand:QI 2 “const_int_operand” ""))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (match_dup 0) (ashiftrt:ALL2 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

;; “*ashrhi3_const” ;; “*ashrhq3_const” “*ashruhq3_const” ;; “*ashrha3_const” “*ashruha3_const” (define_insn_and_split “*ashr3_const_split” [(set (match_operand:ALL2 0 “register_operand” “=r,r,r,r,r”) (ashiftrt:ALL2 (match_operand:ALL2 1 “register_operand” “0,0,r,0,0”) (match_operand:QI 2 “const_int_operand” “L,P,O,K,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X,&d”))] “reload_completed” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ashiftrt:ALL2 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*ashr3_const” [(set (match_operand:ALL2 0 “register_operand” “=r,r,r,r,r”) (ashiftrt:ALL2 (match_operand:ALL2 1 “register_operand” “0,0,r,0,0”) (match_operand:QI 2 “const_int_operand” “L,P,O,K,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return ashrhi3_out (insn, operands, NULL); } [(set_attr “length” “0,2,4,4,10”) (set_attr “adjust_len” “ashrhi”)])

(define_peephole2 [(match_scratch:QI 3 “d”) (parallel [(set (match_operand:ALL4 0 “register_operand” "") (ashiftrt:ALL4 (match_operand:ALL4 1 “register_operand” "") (match_operand:QI 2 “const_int_operand” ""))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (match_dup 0) (ashiftrt:ALL4 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

;; “*ashrsi3_const” ;; “*ashrsq3_const” “*ashrusq3_const” ;; “*ashrsa3_const” “*ashrusa3_const” (define_insn_and_split “*ashr3_const_split” [(set (match_operand:ALL4 0 “register_operand” “=r,r,r,r”) (ashiftrt:ALL4 (match_operand:ALL4 1 “register_operand” “0,0,r,0”) (match_operand:QI 2 “const_int_operand” “L,P,O,n”))) (clobber (match_scratch:QI 3 “=X,X,X,&d”))] “reload_completed” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (ashiftrt:ALL4 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*ashr3_const” [(set (match_operand:ALL4 0 “register_operand” “=r,r,r,r”) (ashiftrt:ALL4 (match_operand:ALL4 1 “register_operand” “0,0,r,0”) (match_operand:QI 2 “const_int_operand” “L,P,O,n”))) (clobber (match_scratch:QI 3 “=X,X,X,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return ashrsi3_out (insn, operands, NULL); } [(set_attr “length” “0,4,4,10”) (set_attr “adjust_len” “ashrsi”)])

;; >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> ;; logical shift right

;; “lshrqi3” ;; “lshrqq3” “lshruqq3” (define_expand “lshr3” [(set (match_operand:ALL1 0 “register_operand” "") (lshiftrt:ALL1 (match_operand:ALL1 1 “register_operand” "") (match_operand:QI 2 “nop_general_operand” "")))])

(define_split ; lshrqi3_const4 [(set (match_operand:ALL1 0 “d_register_operand” "") (lshiftrt:ALL1 (match_dup 0) (const_int 4)))] "" [(set (match_dup 1) (rotate:QI (match_dup 1) (const_int 4))) (set (match_dup 1) (and:QI (match_dup 1) (const_int 15)))] { operands[1] = avr_to_int_mode (operands[0]); })

(define_split ; lshrqi3_const5 [(set (match_operand:ALL1 0 “d_register_operand” "") (lshiftrt:ALL1 (match_dup 0) (const_int 5)))] "" [(set (match_dup 1) (rotate:QI (match_dup 1) (const_int 4))) (set (match_dup 1) (lshiftrt:QI (match_dup 1) (const_int 1))) (set (match_dup 1) (and:QI (match_dup 1) (const_int 7)))] { operands[1] = avr_to_int_mode (operands[0]); })

(define_split ; lshrqi3_const6 [(set (match_operand:QI 0 “d_register_operand” "") (lshiftrt:QI (match_dup 0) (const_int 6)))] "" [(set (match_dup 1) (rotate:QI (match_dup 1) (const_int 4))) (set (match_dup 1) (lshiftrt:QI (match_dup 1) (const_int 2))) (set (match_dup 1) (and:QI (match_dup 1) (const_int 3)))] { operands[1] = avr_to_int_mode (operands[0]); })

;; “*lshrqi3” ;; “*lshrqq3” ;; “*lshruqq3” (define_insn_and_split “*lshr3_split” [(set (match_operand:ALL1 0 “register_operand” “=r,r,r,r,!d,r,r”) (lshiftrt:ALL1 (match_operand:ALL1 1 “register_operand” “0,0,0,0,0 ,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,K,n ,n,Qm”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (lshiftrt:ALL1 (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*lshr3” [(set (match_operand:ALL1 0 “register_operand” “=r,r,r,r,!d,r,r”) (lshiftrt:ALL1 (match_operand:ALL1 1 “register_operand” “0,0,0,0,0 ,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,K,n ,n,Qm”))) (clobber (reg:CC REG_CC))] “reload_completed” { return lshrqi3_out (insn, operands, NULL); } [(set_attr “length” “5,0,1,2,4,6,9”) (set_attr “adjust_len” “lshrqi”)])

;; “lshrhi3” ;; “lshrhq3” “lshruhq3” ;; “lshrha3” “lshruha3” (define_insn_and_split “lshr3” [(set (match_operand:ALL2 0 “register_operand” “=r,r,r,r,r,r,r”) (lshiftrt:ALL2 (match_operand:ALL2 1 “register_operand” “0,0,0,r,0,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,O,K,n,Qm”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (lshiftrt:ALL2 (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*lshr3” [(set (match_operand:ALL2 0 “register_operand” “=r,r,r,r,r,r,r”) (lshiftrt:ALL2 (match_operand:ALL2 1 “register_operand” “0,0,0,r,0,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,O,K,n,Qm”))) (clobber (reg:CC REG_CC))] “reload_completed” { return lshrhi3_out (insn, operands, NULL); } [(set_attr “length” “6,0,2,2,4,10,10”) (set_attr “adjust_len” “lshrhi”)])

(define_insn_and_split “lshrpsi3” [(set (match_operand:PSI 0 “register_operand” “=r,r,r,r,r”) (lshiftrt:PSI (match_operand:PSI 1 “register_operand” “0,0,r,0,0”) (match_operand:QI 2 “nonmemory_operand” “r,P,O,K,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X,&d”))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (lshiftrt:PSI (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*lshrpsi3” [(set (match_operand:PSI 0 “register_operand” “=r,r,r,r,r”) (lshiftrt:PSI (match_operand:PSI 1 “register_operand” “0,0,r,0,0”) (match_operand:QI 2 “nonmemory_operand” “r,P,O,K,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_lshrpsi3 (insn, operands, NULL); } [(set_attr “adjust_len” “lshrpsi”)])

;; “lshrsi3” ;; “lshrsq3” “lshrusq3” ;; “lshrsa3” “lshrusa3” (define_insn_and_split “lshr3” [(set (match_operand:ALL4 0 “register_operand” “=r,r,r,r,r,r,r”) (lshiftrt:ALL4 (match_operand:ALL4 1 “register_operand” “0,0,0,r,0,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,O,K,n,Qm”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (lshiftrt:ALL4 (match_dup 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*lshr3” [(set (match_operand:ALL4 0 “register_operand” “=r,r,r,r,r,r,r”) (lshiftrt:ALL4 (match_operand:ALL4 1 “register_operand” “0,0,0,r,0,0,0”) (match_operand:QI 2 “nop_general_operand” “r,L,P,O,K,n,Qm”))) (clobber (reg:CC REG_CC))] “reload_completed” { return lshrsi3_out (insn, operands, NULL); } [(set_attr “length” “8,0,4,4,8,10,12”) (set_attr “adjust_len” “lshrsi”)])

;; Optimize if a scratch register from LD_REGS happens to be available.

(define_peephole2 ; lshrqi3_l_const4 [(parallel [(set (match_operand:ALL1 0 “l_register_operand” "") (lshiftrt:ALL1 (match_dup 0) (const_int 4))) (clobber (reg:CC REG_CC))]) (match_scratch:QI 1 “d”)] "" [(parallel [(set (match_dup 2) (rotate:QI (match_dup 2) (const_int 4))) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 1) (const_int 15)) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 2) (and:QI (match_dup 2) (match_dup 1))) (clobber (reg:CC REG_CC))])] { operands[2] = avr_to_int_mode (operands[0]); })

(define_peephole2 ; lshrqi3_l_const5 [(parallel [(set (match_operand:ALL1 0 “l_register_operand” "") (lshiftrt:ALL1 (match_dup 0) (const_int 5))) (clobber (reg:CC REG_CC))]) (match_scratch:QI 1 “d”)] "" [(parallel [(set (match_dup 2) (rotate:QI (match_dup 2) (const_int 4))) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 2) (lshiftrt:QI (match_dup 2) (const_int 1))) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 1) (const_int 7)) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 2) (and:QI (match_dup 2) (match_dup 1))) (clobber (reg:CC REG_CC))])] { operands[2] = avr_to_int_mode (operands[0]); })

(define_peephole2 ; lshrqi3_l_const6 [(parallel [(set (match_operand:ALL1 0 “l_register_operand” "") (lshiftrt:ALL1 (match_dup 0) (const_int 6))) (clobber (reg:CC REG_CC))]) (match_scratch:QI 1 “d”)] "" [(parallel [(set (match_dup 2) (rotate:QI (match_dup 2) (const_int 4))) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 2) (lshiftrt:QI (match_dup 2) (const_int 2))) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 1) (const_int 3)) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 2) (and:QI (match_dup 2) (match_dup 1))) (clobber (reg:CC REG_CC))])] { operands[2] = avr_to_int_mode (operands[0]); })

(define_peephole2 [(match_scratch:QI 3 “d”) (parallel [(set (match_operand:ALL2 0 “register_operand” "") (lshiftrt:ALL2 (match_operand:ALL2 1 “register_operand” "") (match_operand:QI 2 “const_int_operand” ""))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (match_dup 0) (lshiftrt:ALL2 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

;; “*lshrhi3_const” ;; “*lshrhq3_const” “*lshruhq3_const” ;; “*lshrha3_const” “*lshruha3_const” (define_insn_and_split “*lshr3_const_split” [(set (match_operand:ALL2 0 “register_operand” “=r,r,r,r,r”) (lshiftrt:ALL2 (match_operand:ALL2 1 “register_operand” “0,0,r,0,0”) (match_operand:QI 2 “const_int_operand” “L,P,O,K,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X,&d”))] “reload_completed” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (lshiftrt:ALL2 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*lshr3_const” [(set (match_operand:ALL2 0 “register_operand” “=r,r,r,r,r”) (lshiftrt:ALL2 (match_operand:ALL2 1 “register_operand” “0,0,r,0,0”) (match_operand:QI 2 “const_int_operand” “L,P,O,K,n”))) (clobber (match_scratch:QI 3 “=X,X,X,X,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return lshrhi3_out (insn, operands, NULL); } [(set_attr “length” “0,2,2,4,10”) (set_attr “adjust_len” “lshrhi”)])

(define_peephole2 [(match_scratch:QI 3 “d”) (parallel [(set (match_operand:ALL4 0 “register_operand” "") (lshiftrt:ALL4 (match_operand:ALL4 1 “register_operand” "") (match_operand:QI 2 “const_int_operand” ""))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (match_dup 0) (lshiftrt:ALL4 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

;; “*lshrsi3_const” ;; “*lshrsq3_const” “*lshrusq3_const” ;; “*lshrsa3_const” “*lshrusa3_const” (define_insn_and_split “*lshr3_const_split” [(set (match_operand:ALL4 0 “register_operand” “=r,r,r,r”) (lshiftrt:ALL4 (match_operand:ALL4 1 “register_operand” “0,0,r,0”) (match_operand:QI 2 “const_int_operand” “L,P,O,n”))) (clobber (match_scratch:QI 3 “=X,X,X,&d”))] “reload_completed” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (lshiftrt:ALL4 (match_dup 1) (match_dup 2))) (clobber (match_dup 3)) (clobber (reg:CC REG_CC))])])

(define_insn “*lshr3_const” [(set (match_operand:ALL4 0 “register_operand” “=r,r,r,r”) (lshiftrt:ALL4 (match_operand:ALL4 1 “register_operand” “0,0,r,0”) (match_operand:QI 2 “const_int_operand” “L,P,O,n”))) (clobber (match_scratch:QI 3 “=X,X,X,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” { return lshrsi3_out (insn, operands, NULL); } [(set_attr “length” “0,4,4,10”) (set_attr “adjust_len” “lshrsi”)])

;; abs(x) abs(x) abs(x) abs(x) abs(x) abs(x) abs(x) abs(x) abs(x) abs(x) abs(x) ;; abs

(define_insn_and_split “absqi2” [(set (match_operand:QI 0 “register_operand” “=r”) (abs:QI (match_operand:QI 1 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (abs:QI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*absqi2” [(set (match_operand:QI 0 “register_operand” “=r”) (abs:QI (match_operand:QI 1 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “sbrc %0,7 neg %0” [(set_attr “length” “2”)])

(define_insn_and_split “abssf2” [(set (match_operand:SF 0 “register_operand” “=d,r”) (abs:SF (match_operand:SF 1 “register_operand” “0,0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (abs:SF (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*abssf2” [(set (match_operand:SF 0 “register_operand” “=d,r”) (abs:SF (match_operand:SF 1 “register_operand” “0,0”))) (clobber (reg:CC REG_CC))] “reload_completed” “@ andi %D0,0x7f clt;bld %D0,7” [(set_attr “length” “1,2”)])

;; 0 - x 0 - x 0 - x 0 - x 0 - x 0 - x 0 - x 0 - x 0 - x 0 - x 0 - x ;; neg

(define_insn_and_split “negqi2” [(set (match_operand:QI 0 “register_operand” “=r”) (neg:QI (match_operand:QI 1 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (neg:QI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*negqi2” [(set (match_operand:QI 0 “register_operand” “=r”) (neg:QI (match_operand:QI 1 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “neg %0” [(set_attr “length” “1”)])

(define_insn_and_split “*negqihi2_split” [(set (match_operand:HI 0 “register_operand” “=r”) (neg:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “0”))))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (neg:HI (sign_extend:HI (match_dup 1)))) (clobber (reg:CC REG_CC))])])

(define_insn “*negqihi2” [(set (match_operand:HI 0 “register_operand” “=r”) (neg:HI (sign_extend:HI (match_operand:QI 1 “register_operand” “0”)))) (clobber (reg:CC REG_CC))] “reload_completed” “clr %B0;neg %A0;brge .+2;com %B0” [(set_attr “length” “4”)])

(define_insn_and_split “neghi2” [(set (match_operand:HI 0 “register_operand” “=r,&r”) (neg:HI (match_operand:HI 1 “register_operand” “0,r”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (neg:HI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*neghi2” [(set (match_operand:HI 0 “register_operand” “=r,&r”) (neg:HI (match_operand:HI 1 “register_operand” “0,r”))) (clobber (reg:CC REG_CC))] “reload_completed” “@ neg %B0;neg %A0;sbc %B0,zero_reg clr %A0;clr %B0;sub %A0,%A1;sbc %B0,%B1” [(set_attr “length” “3,4”)])

(define_insn_and_split “negpsi2” [(set (match_operand:PSI 0 “register_operand” “=!d,r,&r”) (neg:PSI (match_operand:PSI 1 “register_operand” “0,0,r”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (neg:PSI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*negpsi2” [(set (match_operand:PSI 0 “register_operand” “=!d,r,&r”) (neg:PSI (match_operand:PSI 1 “register_operand” “0,0,r”))) (clobber (reg:CC REG_CC))] “reload_completed” “@ com %C0;com %B0;neg %A0;sbci %B0,-1;sbci %C0,-1 com %C0;com %B0;com %A0;adc %A0,zero_reg;adc %B0,zero_reg;adc %C0,zero_reg clr %A0;clr %B0;clr %C0;sub %A0,%A1;sbc %B0,%B1;sbc %C0,%C1” [(set_attr “length” “5,6,6”)])

(define_insn_and_split “negsi2” [(set (match_operand:SI 0 “register_operand” “=!d,r,&r,&r”) (neg:SI (match_operand:SI 1 “register_operand” “0,0,r ,r”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (neg:SI (match_dup 1))) (clobber (reg:CC REG_CC))])] "" [(set_attr “isa” “,,mov,movw”)])

(define_insn “*negsi2” [(set (match_operand:SI 0 “register_operand” “=!d,r,&r,&r”) (neg:SI (match_operand:SI 1 “register_operand” “0,0,r ,r”))) (clobber (reg:CC REG_CC))] “reload_completed” “@ com %D0;com %C0;com %B0;neg %A0;sbci %B0,lo8(-1);sbci %C0,lo8(-1);sbci %D0,lo8(-1) com %D0;com %C0;com %B0;com %A0;adc %A0,zero_reg;adc %B0,zero_reg;adc %C0,zero_reg;adc %D0,zero_reg clr %A0;clr %B0;clr %C0;clr %D0;sub %A0,%A1;sbc %B0,%B1;sbc %C0,%C1;sbc %D0,%D1 clr %A0;clr %B0;movw %C0,%A0;sub %A0,%A1;sbc %B0,%B1;sbc %C0,%C1;sbc %D0,%D1” [(set_attr “length” “7,8,8,7”) (set_attr “isa” “,,mov,movw”)])

(define_insn_and_split “negsf2” [(set (match_operand:SF 0 “register_operand” “=d,r”) (neg:SF (match_operand:SF 1 “register_operand” “0,0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (neg:SF (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*negsf2” [(set (match_operand:SF 0 “register_operand” “=d,r”) (neg:SF (match_operand:SF 1 “register_operand” “0,0”))) (clobber (reg:CC REG_CC))] “reload_completed” “@ subi %D0,0x80 bst %D0,7;com %D0;bld %D0,7;com %D0” [(set_attr “length” “1,4”)])

;; !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ;; not

(define_insn_and_split “one_cmplqi2” [(set (match_operand:QI 0 “register_operand” “=r”) (not:QI (match_operand:QI 1 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (not:QI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*one_cmplqi2” [(set (match_operand:QI 0 “register_operand” “=r”) (not:QI (match_operand:QI 1 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “com %0” [(set_attr “length” “1”)])

(define_insn_and_split “one_cmplhi2” [(set (match_operand:HI 0 “register_operand” “=r”) (not:HI (match_operand:HI 1 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (not:HI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*one_cmplhi2” [(set (match_operand:HI 0 “register_operand” “=r”) (not:HI (match_operand:HI 1 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “com %0 com %B0” [(set_attr “length” “2”)])

(define_insn_and_split “one_cmplpsi2” [(set (match_operand:PSI 0 “register_operand” “=r”) (not:PSI (match_operand:PSI 1 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (not:PSI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*one_cmplpsi2” [(set (match_operand:PSI 0 “register_operand” “=r”) (not:PSI (match_operand:PSI 1 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “com %0;com %B0;com %C0” [(set_attr “length” “3”)])

(define_insn_and_split “one_cmplsi2” [(set (match_operand:SI 0 “register_operand” “=r”) (not:SI (match_operand:SI 1 “register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (not:SI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*one_cmplsi2” [(set (match_operand:SI 0 “register_operand” “=r”) (not:SI (match_operand:SI 1 “register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” “com %0 com %B0 com %C0 com %D0” [(set_attr “length” “4”)])

;; xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x ;; sign extend

;; We keep combiner from inserting hard registers into the input of sign- and ;; zero-extends. A hard register in the input operand is not wanted because ;; 32-bit multiply patterns clobber some hard registers and extends with a ;; hard register that overlaps these clobbers won't be combined to a widening ;; multiplication. There is no need for combine to propagate hard registers, ;; register allocation can do it just as well.

(define_insn_and_split “extendqihi2” [(set (match_operand:HI 0 “register_operand” “=r,r”) (sign_extend:HI (match_operand:QI 1 “combine_pseudo_register_operand” “0,*r”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (sign_extend:HI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*extendqihi2” [(set (match_operand:HI 0 “register_operand” “=r,r”) (sign_extend:HI (match_operand:QI 1 “combine_pseudo_register_operand” “0,*r”))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_sign_extend (insn, operands, NULL); } [(set_attr “length” “3,4”) (set_attr “adjust_len” “sext”)])

(define_insn_and_split “extendqipsi2” [(set (match_operand:PSI 0 “register_operand” “=r,r”) (sign_extend:PSI (match_operand:QI 1 “combine_pseudo_register_operand” “0,*r”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (sign_extend:PSI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*extendqipsi2” [(set (match_operand:PSI 0 “register_operand” “=r,r”) (sign_extend:PSI (match_operand:QI 1 “combine_pseudo_register_operand” “0,*r”))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_sign_extend (insn, operands, NULL); } [(set_attr “length” “4,5”) (set_attr “adjust_len” “sext”)])

(define_insn_and_split “extendqisi2” [(set (match_operand:SI 0 “register_operand” “=r,r”) (sign_extend:SI (match_operand:QI 1 “combine_pseudo_register_operand” “0,*r”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (sign_extend:SI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*extendqisi2” [(set (match_operand:SI 0 “register_operand” “=r,r”) (sign_extend:SI (match_operand:QI 1 “combine_pseudo_register_operand” “0,*r”))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_sign_extend (insn, operands, NULL); } [(set_attr “length” “5,6”) (set_attr “adjust_len” “sext”)])

(define_insn_and_split “extendhipsi2” [(set (match_operand:PSI 0 “register_operand” “=r,r”) (sign_extend:PSI (match_operand:HI 1 “combine_pseudo_register_operand” “0,*r”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (sign_extend:PSI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*extendhipsi2” [(set (match_operand:PSI 0 “register_operand” “=r,r”) (sign_extend:PSI (match_operand:HI 1 “combine_pseudo_register_operand” “0,*r”))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_sign_extend (insn, operands, NULL); } [(set_attr “length” “3,5”) (set_attr “adjust_len” “sext”)])

(define_insn_and_split “extendhisi2” [(set (match_operand:SI 0 “register_operand” “=r,r”) (sign_extend:SI (match_operand:HI 1 “combine_pseudo_register_operand” “0,*r”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (sign_extend:SI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*extendhisi2” [(set (match_operand:SI 0 “register_operand” “=r,r”) (sign_extend:SI (match_operand:HI 1 “combine_pseudo_register_operand” “0,*r”))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_sign_extend (insn, operands, NULL); } [(set_attr “length” “4,6”) (set_attr “adjust_len” “sext”)])

(define_insn_and_split “extendpsisi2” [(set (match_operand:SI 0 “register_operand” “=r”) (sign_extend:SI (match_operand:PSI 1 “combine_pseudo_register_operand” “0”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (sign_extend:SI (match_dup 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*extendpsisi2” [(set (match_operand:SI 0 “register_operand” “=r”) (sign_extend:SI (match_operand:PSI 1 “combine_pseudo_register_operand” “0”))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_sign_extend (insn, operands, NULL); } [(set_attr “length” “3”) (set_attr “adjust_len” “sext”)])

;; xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x xx<---x ;; zero extend

(define_insn_and_split “zero_extendqihi2” [(set (match_operand:HI 0 “register_operand” “=r”) (zero_extend:HI (match_operand:QI 1 “combine_pseudo_register_operand” “r”)))] "" “#” “reload_completed” [(set (match_dup 2) (match_dup 1)) (set (match_dup 3) (const_int 0))] { unsigned int low_off = subreg_lowpart_offset (QImode, HImode); unsigned int high_off = subreg_highpart_offset (QImode, HImode);

operands[2] = simplify_gen_subreg (QImode, operands[0], HImode, low_off);
operands[3] = simplify_gen_subreg (QImode, operands[0], HImode, high_off);

})

(define_insn_and_split “zero_extendqipsi2” [(set (match_operand:PSI 0 “register_operand” “=r”) (zero_extend:PSI (match_operand:QI 1 “combine_pseudo_register_operand” “r”)))] "" “#” “reload_completed” [(set (match_dup 2) (match_dup 1)) (set (match_dup 3) (const_int 0)) (set (match_dup 4) (const_int 0))] { operands[2] = simplify_gen_subreg (QImode, operands[0], PSImode, 0); operands[3] = simplify_gen_subreg (QImode, operands[0], PSImode, 1); operands[4] = simplify_gen_subreg (QImode, operands[0], PSImode, 2); })

(define_insn_and_split “zero_extendqisi2” [(set (match_operand:SI 0 “register_operand” “=r”) (zero_extend:SI (match_operand:QI 1 “combine_pseudo_register_operand” “r”)))] "" “#” “reload_completed” [(set (match_dup 2) (zero_extend:HI (match_dup 1))) (set (match_dup 3) (const_int 0))] { unsigned int low_off = subreg_lowpart_offset (HImode, SImode); unsigned int high_off = subreg_highpart_offset (HImode, SImode);

operands[2] = simplify_gen_subreg (HImode, operands[0], SImode, low_off);
operands[3] = simplify_gen_subreg (HImode, operands[0], SImode, high_off);

})

(define_insn_and_split “zero_extendhipsi2” [(set (match_operand:PSI 0 “register_operand” “=r”) (zero_extend:PSI (match_operand:HI 1 “combine_pseudo_register_operand” “r”)))] "" “#” “reload_completed” [(set (match_dup 2) (match_dup 1)) (set (match_dup 3) (const_int 0))] { operands[2] = simplify_gen_subreg (HImode, operands[0], PSImode, 0); operands[3] = simplify_gen_subreg (QImode, operands[0], PSImode, 2); })

(define_insn_and_split “n_extendhipsi2” [(set (match_operand:PSI 0 “register_operand” “=r,r,d,r”) (lo_sum:PSI (match_operand:QI 1 “const_int_operand” “L,P,n,n”) (match_operand:HI 2 “register_operand” “r,r,r,r”))) (clobber (match_scratch:QI 3 “=X,X,X,&d”))] "" “#” “reload_completed” [(set (match_dup 4) (match_dup 2)) (set (match_dup 3) (match_dup 6)) ; no-op move in the case where no scratch is needed (set (match_dup 5) (match_dup 3))] { operands[4] = simplify_gen_subreg (HImode, operands[0], PSImode, 0); operands[5] = simplify_gen_subreg (QImode, operands[0], PSImode, 2); operands[6] = operands[1];

if (GET_CODE (operands[3]) == SCRATCH)
  operands[3] = operands[5];

})

(define_insn_and_split “zero_extendhisi2” [(set (match_operand:SI 0 “register_operand” “=r”) (zero_extend:SI (match_operand:HI 1 “combine_pseudo_register_operand” “r”)))] "" “#” “reload_completed” [(set (match_dup 2) (match_dup 1)) (set (match_dup 3) (const_int 0))] { unsigned int low_off = subreg_lowpart_offset (HImode, SImode); unsigned int high_off = subreg_highpart_offset (HImode, SImode);

operands[2] = simplify_gen_subreg (HImode, operands[0], SImode, low_off);
operands[3] = simplify_gen_subreg (HImode, operands[0], SImode, high_off);

})

(define_insn_and_split “zero_extendpsisi2” [(set (match_operand:SI 0 “register_operand” “=r”) (zero_extend:SI (match_operand:PSI 1 “combine_pseudo_register_operand” “r”)))] "" “#” “reload_completed” [(set (match_dup 2) (match_dup 1)) (set (match_dup 3) (const_int 0))] { operands[2] = simplify_gen_subreg (PSImode, operands[0], SImode, 0); operands[3] = simplify_gen_subreg (QImode, operands[0], SImode, 3); })

(define_insn_and_split “zero_extendqidi2” [(set (match_operand:DI 0 “register_operand” “=r”) (zero_extend:DI (match_operand:QI 1 “register_operand” “r”)))] "" “#” “reload_completed” [(set (match_dup 2) (zero_extend:SI (match_dup 1))) (set (match_dup 3) (const_int 0))] { unsigned int low_off = subreg_lowpart_offset (SImode, DImode); unsigned int high_off = subreg_highpart_offset (SImode, DImode);

operands[2] = simplify_gen_subreg (SImode, operands[0], DImode, low_off);
operands[3] = simplify_gen_subreg (SImode, operands[0], DImode, high_off);

})

(define_insn_and_split “zero_extendhidi2” [(set (match_operand:DI 0 “register_operand” “=r”) (zero_extend:DI (match_operand:HI 1 “register_operand” “r”)))] "" “#” “reload_completed” [(set (match_dup 2) (zero_extend:SI (match_dup 1))) (set (match_dup 3) (const_int 0))] { unsigned int low_off = subreg_lowpart_offset (SImode, DImode); unsigned int high_off = subreg_highpart_offset (SImode, DImode);

operands[2] = simplify_gen_subreg (SImode, operands[0], DImode, low_off);
operands[3] = simplify_gen_subreg (SImode, operands[0], DImode, high_off);

})

(define_insn_and_split “zero_extendsidi2” [(set (match_operand:DI 0 “register_operand” “=r”) (zero_extend:DI (match_operand:SI 1 “register_operand” “r”)))] "" “#” “reload_completed” [(set (match_dup 2) (match_dup 1)) (set (match_dup 3) (const_int 0))] { unsigned int low_off = subreg_lowpart_offset (SImode, DImode); unsigned int high_off = subreg_highpart_offset (SImode, DImode);

operands[2] = simplify_gen_subreg (SImode, operands[0], DImode, low_off);
operands[3] = simplify_gen_subreg (SImode, operands[0], DImode, high_off);

})

;;<=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=><=> ;; compare

; Optimize negated tests into reverse compare if overflow is undefined. (define_insn “*negated_tstqi” [(set (reg:CC REG_CC) (compare:CC (neg:QI (match_operand:QI 0 “register_operand” “r”)) (const_int 0)))] “reload_completed && !flag_wrapv && !flag_trapv” “cp zero_reg,%0” [(set_attr “length” “1”)])

(define_insn “*reversed_tstqi” [(set (reg:CC REG_CC) (compare:CC (const_int 0) (match_operand:QI 0 “register_operand” “r”)))] “reload_completed” “cp zero_reg,%0” [(set_attr “length” “2”)])

(define_insn “*negated_tsthi” [(set (reg:CC REG_CC) (compare:CC (neg:HI (match_operand:HI 0 “register_operand” “r”)) (const_int 0)))] “reload_completed && !flag_wrapv && !flag_trapv” “cp zero_reg,%A0 cpc zero_reg,%B0” [(set_attr “length” “2”)])

;; Leave here the clobber used by the cmphi pattern for simplicity, even ;; though it is unused, because this pattern is synthesized by avr_reorg. (define_insn “*reversed_tsthi” [(set (reg:CC REG_CC) (compare:CC (const_int 0) (match_operand:HI 0 “register_operand” “r”))) (clobber (match_scratch:QI 1 “=X”))] “reload_completed” “cp zero_reg,%A0 cpc zero_reg,%B0” [(set_attr “length” “2”)])

(define_insn “*negated_tstpsi” [(set (reg:CC REG_CC) (compare:CC (neg:PSI (match_operand:PSI 0 “register_operand” “r”)) (const_int 0)))] “reload_completed && !flag_wrapv && !flag_trapv” “cp zero_reg,%A0;cpc zero_reg,%B0;cpc zero_reg,%C0” [(set_attr “length” “3”)])

(define_insn “*reversed_tstpsi” [(set (reg:CC REG_CC) (compare:CC (const_int 0) (match_operand:PSI 0 “register_operand” “r”))) (clobber (match_scratch:QI 1 “=X”))] “reload_completed” “cp zero_reg,%A0;cpc zero_reg,%B0;cpc zero_reg,%C0” [(set_attr “length” “3”)])

(define_insn “*negated_tstsi” [(set (reg:CC REG_CC) (compare:CC (neg:SI (match_operand:SI 0 “register_operand” “r”)) (const_int 0)))] “reload_completed && !flag_wrapv && !flag_trapv” “cp zero_reg,%A0 cpc zero_reg,%B0 cpc zero_reg,%C0 cpc zero_reg,%D0” [(set_attr “length” “4”)])

;; “*reversed_tstsi” ;; “*reversed_tstsq” “*reversed_tstusq” ;; “*reversed_tstsa” “*reversed_tstusa” (define_insn “*reversed_tst” [(set (reg:CC REG_CC) (compare:CC (match_operand:ALL4 0 “const0_operand” “Y00”) (match_operand:ALL4 1 “register_operand” “r”))) (clobber (match_scratch:QI 2 “=X”))] “reload_completed” “cp zero_reg,%A1 cpc zero_reg,%B1 cpc zero_reg,%C1 cpc zero_reg,%D1” [(set_attr “length” “4”)])

;; “cmpqi3” ;; “cmpqq3” “cmpuqq3” (define_insn “cmp3” [(set (reg:CC REG_CC) (compare:CC (match_operand:ALL1 0 “register_operand” “r ,r,d”) (match_operand:ALL1 1 “nonmemory_operand” “Y00,r,i”)))] “reload_completed” “@ tst %0 cp %0,%1 cpi %0,lo8(%1)” [(set_attr “length” “1,1,1”)])

(define_insn “*cmpqi_sign_extend” [(set (reg:CC REG_CC) (compare:CC (sign_extend:HI (match_operand:QI 0 “register_operand” “d”)) (match_operand:HI 1 “s8_operand” “n”)))] “reload_completed” “cpi %0,lo8(%1)” [(set_attr “length” “1”)])

(define_insn “*cmphi.zero-extend.0” [(set (reg:CC REG_CC) (compare:CC (zero_extend:HI (match_operand:QI 0 “register_operand” “r”)) (match_operand:HI 1 “register_operand” “r”)))] “reload_completed” “cp %0,%A1;cpc zero_reg,%B1” [(set_attr “length” “2”)])

(define_insn “*cmphi.zero-extend.1” [(set (reg:CC REG_CC) (compare:CC (match_operand:HI 0 “register_operand” “r”) (zero_extend:HI (match_operand:QI 1 “register_operand” “r”))))] “reload_completed” “cp %A0,%1;cpc %B0,zero_reg” [(set_attr “length” “2”)])

;; “cmphi3” ;; “cmphq3” “cmpuhq3” ;; “cmpha3” “cmpuha3” (define_insn “cmp3” [(set (reg:CC REG_CC) (compare:CC (match_operand:ALL2 0 “register_operand” “!w ,r ,r,d ,r ,d,r”) (match_operand:ALL2 1 “nonmemory_operand” “Y00,Y00,r,s ,s ,M,n Ynn”))) (clobber (match_scratch:QI 2 “=X ,X ,X,&d,&d ,X,&d”))] “reload_completed” { switch (which_alternative) { case 0: case 1: return avr_out_tsthi (insn, operands, NULL);

  case 2:
    return "cp %A0,%A1\;cpc %B0,%B1";

  case 3:
    if (<MODE>mode != HImode)
      break;
    return reg_unused_after (insn, operands[0])
           ? "subi %A0,lo8(%1)\;sbci %B0,hi8(%1)"
           : "ldi %2,hi8(%1)\;cpi %A0,lo8(%1)\;cpc %B0,%2";

  case 4:
    if (<MODE>mode != HImode)
      break;
    return "ldi %2,lo8(%1)\;cp %A0,%2\;ldi %2,hi8(%1)\;cpc %B0,%2";
  }

return avr_out_compare (insn, operands, NULL);

} [(set_attr “length” “1,2,2,3,4,2,4”) (set_attr “adjust_len” “tsthi,tsthi,,,*,compare,compare”)])

(define_insn “*cmppsi” [(set (reg:CC REG_CC) (compare:CC (match_operand:PSI 0 “register_operand” “r,r,d ,r ,d,r”) (match_operand:PSI 1 “nonmemory_operand” “L,r,s ,s ,M,n”))) (clobber (match_scratch:QI 2 “=X,X,&d,&d ,X,&d”))] “reload_completed” { switch (which_alternative) { case 0: return avr_out_tstpsi (insn, operands, NULL);

  case 1:
    return "cp %A0,%A1\;cpc %B0,%B1\;cpc %C0,%C1";

  case 2:
    return reg_unused_after (insn, operands[0])
           ? "subi %A0,lo8(%1)\;sbci %B0,hi8(%1)\;sbci %C0,hh8(%1)"
           : "cpi %A0,lo8(%1)\;ldi %2,hi8(%1)\;cpc %B0,%2\;ldi %2,hh8(%1)\;cpc %C0,%2";

  case 3:
    return "ldi %2,lo8(%1)\;cp %A0,%2\;ldi %2,hi8(%1)\;cpc %B0,%2\;ldi %2,hh8(%1)\;cpc %C0,%2";
  }

return avr_out_compare (insn, operands, NULL);

} [(set_attr “length” “3,3,5,6,3,7”) (set_attr “adjust_len” “tstpsi,,,*,compare,compare”)])

;; “*cmpsi” ;; “*cmpsq” “*cmpusq” ;; “*cmpsa” “*cmpusa” (define_insn “*cmp” [(set (reg:CC REG_CC) (compare:CC (match_operand:ALL4 0 “register_operand” “r ,r ,d,r ,r”) (match_operand:ALL4 1 “nonmemory_operand” “Y00,r ,M,M ,n Ynn”))) (clobber (match_scratch:QI 2 “=X ,X ,X,&d,&d”))] “reload_completed” { if (0 == which_alternative) return avr_out_tstsi (insn, operands, NULL); else if (1 == which_alternative) return “cp %A0,%A1;cpc %B0,%B1;cpc %C0,%C1;cpc %D0,%D1”;

return avr_out_compare (insn, operands, NULL);

} [(set_attr “length” “4,4,4,5,8”) (set_attr “adjust_len” “tstsi,*,compare,compare,compare”)])

;; ---------------------------------------------------------------------- ;; JUMP INSTRUCTIONS ;; ---------------------------------------------------------------------- ;; Conditional jump instructions

(define_expand “cbranch4” [(set (pc) (if_then_else (match_operator 0 “ordered_comparison_operator” [(match_operand:ALL1 1 “register_operand” "") (match_operand:ALL1 2 “nonmemory_operand” "")]) (label_ref (match_operand 3 "" "")) (pc)))])

(define_expand “cbranch4” [(parallel [(set (pc) (if_then_else (match_operator 0 “ordered_comparison_operator” [(match_operand:ORDERED234 1 “register_operand” "") (match_operand:ORDERED234 2 “nonmemory_operand” "")]) (label_ref (match_operand 3 "" "")) (pc))) (clobber (match_scratch:QI 4 ""))])])

;; “*cbranchqi4” ;; “*cbranchqq4” “*cbranchuqq4” (define_insn_and_split “*cbranch4” [(set (pc) (if_then_else (match_operator 0 “ordered_comparison_operator” [(match_operand:ALL1 1 “register_operand” “r ,r,d”) (match_operand:ALL1 2 “nonmemory_operand” “Y00,r,i”)]) (label_ref (match_operand 3 "" "")) (pc)))] "" “#” “reload_completed” [(set (reg:CC REG_CC) (compare:CC (match_dup 1) (match_dup 2))) (set (pc) (if_then_else (match_op_dup 0 [(reg:CC REG_CC) (const_int 0)]) (label_ref (match_dup 3)) (pc)))] "")

;; “*cbranchsi4” “*cbranchsq4” “*cbranchusq4” “*cbranchsa4” “*cbranchusa4” (define_insn_and_split “*cbranch4” [(set (pc) (if_then_else (match_operator 0 “ordered_comparison_operator” [(match_operand:ALL4 1 “register_operand” “r ,r ,d,r ,r”) (match_operand:ALL4 2 “nonmemory_operand” “Y00,r ,M,M ,n Ynn”)]) (label_ref (match_operand 3 "" "")) (pc))) (clobber (match_scratch:QI 4 “=X ,X ,X,&d,&d”))] "" “#” “reload_completed” [(parallel [(set (reg:CC REG_CC) (compare:CC (match_dup 1) (match_dup 2))) (clobber (match_dup 4))]) (set (pc) (if_then_else (match_op_dup 0 [(reg:CC REG_CC) (const_int 0)]) (label_ref (match_dup 3)) (pc)))] "")

;; “*cbranchpsi4” (define_insn_and_split “*cbranchpsi4” [(set (pc) (if_then_else (match_operator 0 “ordered_comparison_operator” [(match_operand:PSI 1 “register_operand” “r,r,d ,r ,d,r”) (match_operand:PSI 2 “nonmemory_operand” “L,r,s ,s ,M,n”)]) (label_ref (match_operand 3 "" "")) (pc))) (clobber (match_scratch:QI 4 “=X,X,&d,&d ,X,&d”))] "" “#” “reload_completed” [(parallel [(set (reg:CC REG_CC) (compare:CC (match_dup 1) (match_dup 2))) (clobber (match_dup 4))]) (set (pc) (if_then_else (match_op_dup 0 [(reg:CC REG_CC) (const_int 0)]) (label_ref (match_dup 3)) (pc)))] "")

;; “*cbranchhi4” “*cbranchhq4” “*cbranchuhq4” “*cbranchha4” “*cbranchuha4” (define_insn_and_split “*cbranch4” [(set (pc) (if_then_else (match_operator 0 “ordered_comparison_operator” [(match_operand:ALL2 1 “register_operand” “!w ,r ,r,d ,r ,d,r”) (match_operand:ALL2 2 “nonmemory_operand” “Y00,Y00,r,s ,s ,M,n Ynn”)]) (label_ref (match_operand 3 "" "")) (pc))) (clobber (match_scratch:QI 4 “=X ,X ,X,&d,&d ,X,&d”))] "" “#” “reload_completed” [(parallel [(set (reg:CC REG_CC) (compare:CC (match_dup 1) (match_dup 2))) (clobber (match_dup 4))]) (set (pc) (if_then_else (match_op_dup 0 [(reg:CC REG_CC) (const_int 0)]) (label_ref (match_dup 3)) (pc)))] "")

;; Test a single bit in a QI/HI/SImode register. ;; Combine will create zero extract patterns for single bit tests. ;; permit any mode in source pattern by using VOIDmode.

(define_insn_and_split “*sbrx_branch_split” [(set (pc) (if_then_else (match_operator 0 “eqne_operator” [(zero_extract:QIDI (match_operand:VOID 1 “register_operand” “r”) (const_int 1) (match_operand 2 “const_int_operand” “n”)) (const_int 0)]) (label_ref (match_operand 3 "" "")) (pc)))] "" “#” “&& reload_completed” [(parallel [(set (pc) (if_then_else (match_op_dup 0 [(zero_extract:QIDI (match_dup 1) (const_int 1) (match_dup 2)) (const_int 0)]) (label_ref (match_dup 3)) (pc))) (clobber (reg:CC REG_CC))])])

(define_insn “*sbrx_branch” [(set (pc) (if_then_else (match_operator 0 “eqne_operator” [(zero_extract:QIDI (match_operand:VOID 1 “register_operand” “r”) (const_int 1) (match_operand 2 “const_int_operand” “n”)) (const_int 0)]) (label_ref (match_operand 3 "" "")) (pc))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_sbxx_branch (insn, operands); } [(set (attr “length”) (if_then_else (and (ge (minus (pc) (match_dup 3)) (const_int -2046)) (le (minus (pc) (match_dup 3)) (const_int 2046))) (const_int 2) (if_then_else (match_test “!AVR_HAVE_JMP_CALL”) (const_int 2) (const_int 4))))])

;; Same test based on bitwise AND. Keep this in case gcc changes patterns. ;; or for old peepholes. ;; Fixme - bitwise Mask will not work for DImode

(define_insn_and_split “*sbrx_and_branch_split” [(set (pc) (if_then_else (match_operator 0 “eqne_operator” [(and:QISI (match_operand:QISI 1 “register_operand” “r”) (match_operand:QISI 2 “single_one_operand” “n”)) (const_int 0)]) (label_ref (match_operand 3 "" "")) (pc)))] "" “#” “&& reload_completed” [(parallel [(set (pc) (if_then_else (match_op_dup 0 [(and:QISI (match_dup 1) (match_dup 2)) (const_int 0)]) (label_ref (match_dup 3)) (pc))) (clobber (reg:CC REG_CC))])])

(define_insn “*sbrx_and_branch” [(set (pc) (if_then_else (match_operator 0 “eqne_operator” [(and:QISI (match_operand:QISI 1 “register_operand” “r”) (match_operand:QISI 2 “single_one_operand” “n”)) (const_int 0)]) (label_ref (match_operand 3 "" "")) (pc))) (clobber (reg:CC REG_CC))] “reload_completed” { HOST_WIDE_INT bitnumber; bitnumber = exact_log2 (GET_MODE_MASK (mode) & INTVAL (operands[2])); operands[2] = GEN_INT (bitnumber); return avr_out_sbxx_branch (insn, operands); } [(set (attr “length”) (if_then_else (and (ge (minus (pc) (match_dup 3)) (const_int -2046)) (le (minus (pc) (match_dup 3)) (const_int 2046))) (const_int 2) (if_then_else (match_test “!AVR_HAVE_JMP_CALL”) (const_int 2) (const_int 4))))])

;; Convert sign tests to bit 7/15/31 tests that match the above insns. (define_peephole2 [(set (reg:CC REG_CC) (compare:CC (match_operand:QI 0 “register_operand” "") (const_int 0))) (parallel [(set (pc) (if_then_else (ge (reg:CC REG_CC) (const_int 0)) (label_ref (match_operand 1 "" "")) (pc))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (pc) (if_then_else (eq (zero_extract:HI (match_dup 0) (const_int 1) (const_int 7)) (const_int 0)) (label_ref (match_dup 1)) (pc))) (clobber (reg:CC REG_CC))])])

(define_peephole2 [(set (reg:CC REG_CC) (compare:CC (match_operand:QI 0 “register_operand” "") (const_int 0))) (parallel [(set (pc) (if_then_else (lt (reg:CC REG_CC) (const_int 0)) (label_ref (match_operand 1 "" "")) (pc))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (pc) (if_then_else (ne (zero_extract:HI (match_dup 0) (const_int 1) (const_int 7)) (const_int 0)) (label_ref (match_dup 1)) (pc))) (clobber (reg:CC REG_CC))])])

(define_peephole2 [(parallel [(set (reg:CC REG_CC) (compare:CC (match_operand:HI 0 “register_operand” "") (const_int 0))) (clobber (match_operand:HI 2 ""))]) (parallel [(set (pc) (if_then_else (ge (reg:CC REG_CC) (const_int 0)) (label_ref (match_operand 1 "" "")) (pc))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (pc) (if_then_else (eq (and:HI (match_dup 0) (const_int -32768)) (const_int 0)) (label_ref (match_dup 1)) (pc))) (clobber (reg:CC REG_CC))])])

(define_peephole2 [(parallel [(set (reg:CC REG_CC) (compare:CC (match_operand:HI 0 “register_operand” "") (const_int 0))) (clobber (match_operand:HI 2 ""))]) (parallel [(set (pc) (if_then_else (lt (reg:CC REG_CC) (const_int 0)) (label_ref (match_operand 1 "" "")) (pc))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (pc) (if_then_else (ne (and:HI (match_dup 0) (const_int -32768)) (const_int 0)) (label_ref (match_dup 1)) (pc))) (clobber (reg:CC REG_CC))])])

(define_peephole2 [(parallel [(set (reg:CC REG_CC) (compare:CC (match_operand:SI 0 “register_operand” "") (const_int 0))) (clobber (match_operand:SI 2 ""))]) (parallel [(set (pc) (if_then_else (ge (reg:CC REG_CC) (const_int 0)) (label_ref (match_operand 1 "" "")) (pc))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (pc) (if_then_else (eq (and:SI (match_dup 0) (match_dup 2)) (const_int 0)) (label_ref (match_dup 1)) (pc))) (clobber (reg:CC REG_CC))])] “operands[2] = gen_int_mode (-2147483647 - 1, SImode);”)

(define_peephole2 [(parallel [(set (reg:CC REG_CC) (compare:CC (match_operand:SI 0 “register_operand” "") (const_int 0))) (clobber (match_operand:SI 2 ""))]) (parallel [(set (pc) (if_then_else (lt (reg:CC REG_CC) (const_int 0)) (label_ref (match_operand 1 "" "")) (pc))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (pc) (if_then_else (ne (and:SI (match_dup 0) (match_dup 2)) (const_int 0)) (label_ref (match_dup 1)) (pc))) (clobber (reg:CC REG_CC))])] “operands[2] = gen_int_mode (-2147483647 - 1, SImode);”)

;; ************************************************************************ ;; Implementation of conditional jumps here. ;; Compare with 0 (test) jumps ;; ************************************************************************

(define_insn_and_split “branch” [(set (pc) (if_then_else (match_operator 1 “simple_comparison_operator” [(reg:CC REG_CC) (const_int 0)]) (label_ref (match_operand 0 "" "")) (pc)))] “reload_completed” “#” “&& reload_completed” [(parallel [(set (pc) (if_then_else (match_op_dup 1 [(reg:CC REG_CC) (const_int 0)]) (label_ref (match_dup 0)) (pc))) (clobber (reg:CC REG_CC))])])

(define_insn “*branch” [(set (pc) (if_then_else (match_operator 1 “simple_comparison_operator” [(reg:CC REG_CC) (const_int 0)]) (label_ref (match_operand 0 "" "")) (pc))) (clobber (reg:CC REG_CC))] “reload_completed” { return ret_cond_branch (operands[1], avr_jump_mode (operands[0], insn), 0); } [(set_attr “type” “branch”)])

;; Same as above but wrap SET_SRC so that this branch won't be transformed ;; or optimized in the remainder.

(define_insn “branch_unspec” [(set (pc) (unspec [(if_then_else (match_operator 1 “simple_comparison_operator” [(reg:CC REG_CC) (const_int 0)]) (label_ref (match_operand 0 "" "")) (pc)) ] UNSPEC_IDENTITY)) (clobber (reg:CC REG_CC))] “reload_completed” { return ret_cond_branch (operands[1], avr_jump_mode (operands[0], insn), 0); } [(set_attr “type” “branch”)])

;; **************************************************************** ;; AVR does not have following conditional jumps: LE,LEU,GT,GTU. ;; Convert them all to proper jumps. ;; ****************************************************************/

(define_insn_and_split “difficult_branch” [(set (pc) (if_then_else (match_operator 1 “difficult_comparison_operator” [(reg:CC REG_CC) (const_int 0)]) (label_ref (match_operand 0 "" "")) (pc)))] “reload_completed” “#” “&& reload_completed” [(parallel [(set (pc) (if_then_else (match_op_dup 1 [(reg:CC REG_CC) (const_int 0)]) (label_ref (match_dup 0)) (pc))) (clobber (reg:CC REG_CC))])])

(define_insn “*difficult_branch” [(set (pc) (if_then_else (match_operator 1 “difficult_comparison_operator” [(reg:CC REG_CC) (const_int 0)]) (label_ref (match_operand 0 "" "")) (pc))) (clobber (reg:CC REG_CC))] “reload_completed” { return ret_cond_branch (operands[1], avr_jump_mode (operands[0], insn), 0); } [(set_attr “type” “branch1”)])

;; revers branch

(define_insn_and_split “rvbranch” [(set (pc) (if_then_else (match_operator 1 “simple_comparison_operator” [(reg:CC REG_CC) (const_int 0)]) (pc) (label_ref (match_operand 0 "" ""))))] “reload_completed” “#” “&& reload_completed” [(parallel [(set (pc) (if_then_else (match_op_dup 1 [(reg:CC REG_CC) (const_int 0)]) (pc) (label_ref (match_dup 0)))) (clobber (reg:CC REG_CC))])])

(define_insn “*rvbranch” [(set (pc) (if_then_else (match_operator 1 “simple_comparison_operator” [(reg:CC REG_CC) (const_int 0)]) (pc) (label_ref (match_operand 0 "" "")))) (clobber (reg:CC REG_CC))] “reload_completed” { return ret_cond_branch (operands[1], avr_jump_mode (operands[0], insn), 1); } [(set_attr “type” “branch1”)])

(define_insn_and_split “difficult_rvbranch” [(set (pc) (if_then_else (match_operator 1 “difficult_comparison_operator” [(reg:CC REG_CC) (const_int 0)]) (pc) (label_ref (match_operand 0 "" ""))))] “reload_completed” “#” “&& reload_completed” [(parallel [(set (pc) (if_then_else (match_op_dup 1 [(reg:CC REG_CC) (const_int 0)]) (pc) (label_ref (match_dup 0)))) (clobber (reg:CC REG_CC))])])

(define_insn “*difficult_rvbranch” [(set (pc) (if_then_else (match_operator 1 “difficult_comparison_operator” [(reg:CC REG_CC) (const_int 0)]) (pc) (label_ref (match_operand 0 "" "")))) (clobber (reg:CC REG_CC))] “reload_completed” { return ret_cond_branch (operands[1], avr_jump_mode (operands[0], insn), 1); } [(set_attr “type” “branch”)])

;; ************************************************************************** ;; Unconditional and other jump instructions.

(define_insn “jump” [(set (pc) (label_ref (match_operand 0 "" "")))] "" { return AVR_HAVE_JMP_CALL && get_attr_length (insn) != 1 ? “jmp %x0” : “rjmp %x0”; } [(set (attr “length”) (if_then_else (match_operand 0 “symbol_ref_operand” "") (if_then_else (match_test “!AVR_HAVE_JMP_CALL”) (const_int 1) (const_int 2)) (if_then_else (and (ge (minus (pc) (match_dup 0)) (const_int -2047)) (le (minus (pc) (match_dup 0)) (const_int 2047))) (const_int 1) (const_int 2))))])

;; call

;; Operand 1 not used on the AVR. ;; Operand 2 is 1 for tail-call, 0 otherwise. (define_expand “call” [(parallel[(call (match_operand:HI 0 “call_insn_operand” "") (match_operand:HI 1 “general_operand” "")) (use (const_int 0))])])

;; Operand 1 not used on the AVR. ;; Operand 2 is 1 for tail-call, 0 otherwise. (define_expand “sibcall” [(parallel[(call (match_operand:HI 0 “call_insn_operand” "") (match_operand:HI 1 “general_operand” "")) (use (const_int 1))])])

;; call value

;; Operand 2 not used on the AVR. ;; Operand 3 is 1 for tail-call, 0 otherwise. (define_expand “call_value” [(parallel[(set (match_operand 0 “register_operand” "") (call (match_operand:HI 1 “call_insn_operand” "") (match_operand:HI 2 “general_operand” ""))) (use (const_int 0))])])

;; Operand 2 not used on the AVR. ;; Operand 3 is 1 for tail-call, 0 otherwise. (define_expand “sibcall_value” [(parallel[(set (match_operand 0 “register_operand” "") (call (match_operand:HI 1 “call_insn_operand” "") (match_operand:HI 2 “general_operand” ""))) (use (const_int 1))])])

(define_insn “call_insn” [(parallel[(call (mem:HI (match_operand:HI 0 “nonmemory_operand” “z,s,z,s”)) (match_operand:HI 1 “general_operand” “X,X,X,X”)) (use (match_operand:HI 2 “const_int_operand” “L,L,P,P”))])] ;; Operand 1 not used on the AVR. ;; Operand 2 is 1 for tail-call, 0 otherwise. "" “@ %!icall %~call %x0 %!ijmp %~jmp %x0” [(set_attr “length” “1,,1,”) (set_attr “adjust_len” “,call,,call”)])

(define_insn “call_value_insn” [(parallel[(set (match_operand 0 “register_operand” “=r,r,r,r”) (call (mem:HI (match_operand:HI 1 “nonmemory_operand” “z,s,z,s”)) (match_operand:HI 2 “general_operand” “X,X,X,X”))) (use (match_operand:HI 3 “const_int_operand” “L,L,P,P”))])] ;; Operand 2 not used on the AVR. ;; Operand 3 is 1 for tail-call, 0 otherwise. "" “@ %!icall %~call %x1 %!ijmp %~jmp %x1” [(set_attr “length” “1,,1,”) (set_attr “adjust_len” “,call,,call”)])

(define_insn “nop” [(const_int 0)] "" “nop” [(set_attr “length” “1”)])

; indirect jump

(define_expand “indirect_jump” [(set (pc) (match_operand:HI 0 “nonmemory_operand” ""))] "" { if (!AVR_HAVE_JMP_CALL && !register_operand (operands[0], HImode)) { operands[0] = copy_to_mode_reg (HImode, operands[0]); } })

; indirect jump (define_insn “*indirect_jump” [(set (pc) (match_operand:HI 0 “nonmemory_operand” “i,i,!z,*r,z”))] "" “@ rjmp %x0 jmp %x0 ijmp push %A0;push %B0;ret eijmp” [(set_attr “length” “1,2,1,3,1”) (set_attr “isa” “rjmp,jmp,ijmp,ijmp,eijmp”)])

;; table jump ;; For entries in jump table see avr_output_addr_vec.

;; Table made from ;; “rjmp .L” instructions for <= 8K devices ;; “.word gs(.L)” addresses for > 8K devices (define_insn_and_split “*tablejump_split” [(set (pc) (unspec:HI [(match_operand:HI 0 “register_operand” “!z,*r,z”)] UNSPEC_INDEX_JMP)) (use (label_ref (match_operand 1 "" ""))) (clobber (match_dup 0)) (clobber (const_int 0))] “!AVR_HAVE_EIJMP_EICALL” “#” “&& reload_completed” [(parallel [(set (pc) (unspec:HI [(match_dup 0)] UNSPEC_INDEX_JMP)) (use (label_ref (match_dup 1))) (clobber (match_dup 0)) (clobber (const_int 0)) (clobber (reg:CC REG_CC))])] "" [(set_attr “isa” “rjmp,rjmp,jmp”)])

(define_insn “*tablejump” [(set (pc) (unspec:HI [(match_operand:HI 0 “register_operand” “!z,*r,z”)] UNSPEC_INDEX_JMP)) (use (label_ref (match_operand 1 "" ""))) (clobber (match_dup 0)) (clobber (const_int 0)) (clobber (reg:CC REG_CC))] “!AVR_HAVE_EIJMP_EICALL && reload_completed” “@ ijmp push %A0;push %B0;ret jmp tablejump2” [(set_attr “length” “1,3,2”) (set_attr “isa” “rjmp,rjmp,jmp”)])

(define_insn_and_split “*tablejump.3byte-pc_split” [(set (pc) (unspec:HI [(reg:HI REG_Z)] UNSPEC_INDEX_JMP)) (use (label_ref (match_operand 0 "" ""))) (clobber (reg:HI REG_Z)) (clobber (reg:QI 24))] “AVR_HAVE_EIJMP_EICALL” “#” “&& reload_completed” [(parallel [(set (pc) (unspec:HI [(reg:HI REG_Z)] UNSPEC_INDEX_JMP)) (use (label_ref (match_dup 0))) (clobber (reg:HI REG_Z)) (clobber (reg:QI 24)) (clobber (reg:CC REG_CC))])] "" [(set_attr “isa” “eijmp”)])

(define_insn “*tablejump.3byte-pc” [(set (pc) (unspec:HI [(reg:HI REG_Z)] UNSPEC_INDEX_JMP)) (use (label_ref (match_operand 0 "" ""))) (clobber (reg:HI REG_Z)) (clobber (reg:QI 24)) (clobber (reg:CC REG_CC))] “AVR_HAVE_EIJMP_EICALL && reload_completed” “clr r24;subi r30,pm_lo8(-(%0));sbci r31,pm_hi8(-(%0));sbci r24,pm_hh8(-(%0));jmp tablejump2” [(set_attr “length” “6”) (set_attr “isa” “eijmp”)])

;; FIXME: casesi comes up with an SImode switch value $0 which ;; is quite some overhead because most code would use HI or ;; even QI. We add an AVR specific pass .avr-casesi which ;; tries to recover from the superfluous extension to SImode. ;; ;; Using “tablejump” could be a way out, but this also does ;; not perform in a satisfying manner as the middle end will ;; already multiply the table index by 2. Note that this ;; multiplication is performed by libgcc‘s tablejump2. ;; The multiplication there, however, runs after the table ;; start (a byte address) has been added, not before it like ;; “tablejump” will do. ;; ;; The preferred solution would be to let the middle ends pass ;; down information on the index as an additional casesi operand. ;; ;; If this expander is changed, you’ll likely have to go through ;; “casesi__sequence” (used to recog + extract casesi ;; sequences in pass .avr-casesi) and propagate all adjustments ;; also to that pattern and the code of the extra pass.

(define_expand “casesi” [(parallel [(set (match_dup 5) (plus:SI (match_operand:SI 0 “register_operand”) (match_operand:SI 1 “const_int_operand”))) (clobber (scratch:QI))])

(parallel [(set (pc) (if_then_else (gtu (match_dup 5) (match_operand:SI 2 “const_int_operand”)) (label_ref (match_operand 4)) (pc))) (clobber (scratch:QI))])

(set (match_dup 7) (match_dup 6))

(parallel [(set (pc) (unspec:HI [(match_dup 7)] UNSPEC_INDEX_JMP)) (use (label_ref (match_dup 3))) (clobber (match_dup 7)) (clobber (match_dup 8))])] "" { operands[1] = simplify_unary_operation (NEG, SImode, operands[1], SImode); operands[5] = gen_reg_rtx (SImode); operands[6] = simplify_gen_subreg (HImode, operands[5], SImode, 0);

if (AVR_HAVE_EIJMP_EICALL)
  {
    operands[7] = gen_rtx_REG (HImode, REG_Z);
    operands[8] = all_regs_rtx[24];
  }
else
  {
    operands[6] = gen_rtx_PLUS (HImode, operands[6],
                                gen_rtx_LABEL_REF (VOIDmode, operands[3]));
    operands[7] = gen_reg_rtx (HImode);
    operands[8] = const0_rtx;
  }

})

;; This insn is used only for easy operand extraction. ;; The elements must match an extension to SImode plus ;; a sequence generated by casesi above.

;; “casesi_qi_sequence” ;; “casesi_hi_sequence” (define_insn “casesi__sequence” [(set (match_operand:SI 0 “register_operand”) (match_operator:SI 9 “extend_operator” [(match_operand:QIHI 10 “register_operand”)]))

;; What follows is a matcher for code from casesi. ;; We keep the same operand numbering (except for $9 and $10 ;; which don't appear in casesi). (parallel [(set (match_operand:SI 5 “register_operand”) (plus:SI (match_dup 0) (match_operand:SI 1 “const_int_operand”))) (clobber (scratch:QI))])

(parallel [(set (pc) (if_then_else (gtu (match_dup 5) (match_operand:SI 2 “const_int_operand”)) (label_ref (match_operand 4)) (pc))) (clobber (scratch:QI))])

(set (match_operand:HI 7 “register_operand”) (match_operand:HI 6))

(parallel [(set (pc) (unspec:HI [(match_dup 7)] UNSPEC_INDEX_JMP)) (use (label_ref (match_operand 3))) (clobber (match_dup 7)) (clobber (match_operand:QI 8))])] “optimize && avr_casei_sequence_check_operands (operands)” { gcc_unreachable(); } )

;; ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ ;; Clear/set/test a single bit in I/O address space.

(define_insn “*cbi” [(set (mem:QI (match_operand 0 “low_io_address_operand” “i”)) (and:QI (mem:QI (match_dup 0)) (match_operand:QI 1 “single_zero_operand” “n”)))] "" { operands[2] = GEN_INT (exact_log2 (~INTVAL (operands[1]) & 0xff)); return “cbi %i0,%2”; } [(set_attr “length” “1”)])

(define_insn “*sbi” [(set (mem:QI (match_operand 0 “low_io_address_operand” “i”)) (ior:QI (mem:QI (match_dup 0)) (match_operand:QI 1 “single_one_operand” “n”)))] "" { operands[2] = GEN_INT (exact_log2 (INTVAL (operands[1]) & 0xff)); return “sbi %i0,%2”; } [(set_attr “length” “1”)])

;; Lower half of the I/O space - use sbic/sbis directly. (define_insn_and_split “*sbix_branch_split” [(set (pc) (if_then_else (match_operator 0 “eqne_operator” [(zero_extract:QIHI (mem:QI (match_operand 1 “low_io_address_operand” “i”)) (const_int 1) (match_operand 2 “const_int_operand” “n”)) (const_int 0)]) (label_ref (match_operand 3 "" "")) (pc)))] "" “#” “&& reload_completed” [(parallel [(set (pc) (if_then_else (match_operator 0 “eqne_operator” [(zero_extract:QIHI (mem:QI (match_dup 1)) (const_int 1) (match_dup 2)) (const_int 0)]) (label_ref (match_dup 3)) (pc))) (clobber (reg:CC REG_CC))])])

(define_insn “*sbix_branch” [(set (pc) (if_then_else (match_operator 0 “eqne_operator” [(zero_extract:QIHI (mem:QI (match_operand 1 “low_io_address_operand” “i”)) (const_int 1) (match_operand 2 “const_int_operand” “n”)) (const_int 0)]) (label_ref (match_operand 3 "" "")) (pc))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_sbxx_branch (insn, operands); } [(set (attr “length”) (if_then_else (and (ge (minus (pc) (match_dup 3)) (const_int -2046)) (le (minus (pc) (match_dup 3)) (const_int 2046))) (const_int 2) (if_then_else (match_test “!AVR_HAVE_JMP_CALL”) (const_int 2) (const_int 4))))])

;; Tests of bit 7 are pessimized to sign tests, so we need this too... (define_insn_and_split “*sbix_branch_bit7_split” [(set (pc) (if_then_else (match_operator 0 “gelt_operator” [(mem:QI (match_operand 1 “low_io_address_operand” “i”)) (const_int 0)]) (label_ref (match_operand 2 "" "")) (pc)))] "" “#” “&& reload_completed” [(parallel [(set (pc) (if_then_else (match_operator 0 “gelt_operator” [(mem:QI (match_dup 1)) (const_int 0)]) (label_ref (match_dup 2)) (pc))) (clobber (reg:CC REG_CC))])])

(define_insn “*sbix_branch_bit7” [(set (pc) (if_then_else (match_operator 0 “gelt_operator” [(mem:QI (match_operand 1 “low_io_address_operand” “i”)) (const_int 0)]) (label_ref (match_operand 2 "" "")) (pc))) (clobber (reg:CC REG_CC))] “reload_completed” { operands[3] = operands[2]; operands[2] = GEN_INT (7); return avr_out_sbxx_branch (insn, operands); } [(set (attr “length”) (if_then_else (and (ge (minus (pc) (match_dup 2)) (const_int -2046)) (le (minus (pc) (match_dup 2)) (const_int 2046))) (const_int 2) (if_then_else (match_test “!AVR_HAVE_JMP_CALL”) (const_int 2) (const_int 4))))])

;; Upper half of the I/O space - read port to tmp_reg and use sbrc/sbrs. (define_insn_and_split “*sbix_branch_tmp_split” [(set (pc) (if_then_else (match_operator 0 “eqne_operator” [(zero_extract:QIHI (mem:QI (match_operand 1 “high_io_address_operand” “n”)) (const_int 1) (match_operand 2 “const_int_operand” “n”)) (const_int 0)]) (label_ref (match_operand 3 "" "")) (pc)))] "" “#” “&& reload_completed” [(parallel [(set (pc) (if_then_else (match_operator 0 “eqne_operator” [(zero_extract:QIHI (mem:QI (match_dup 1)) (const_int 1) (match_dup 2)) (const_int 0)]) (label_ref (match_dup 3)) (pc))) (clobber (reg:CC REG_CC))])])

(define_insn “*sbix_branch_tmp” [(set (pc) (if_then_else (match_operator 0 “eqne_operator” [(zero_extract:QIHI (mem:QI (match_operand 1 “high_io_address_operand” “n”)) (const_int 1) (match_operand 2 “const_int_operand” “n”)) (const_int 0)]) (label_ref (match_operand 3 "" "")) (pc))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_sbxx_branch (insn, operands); } [(set (attr “length”) (if_then_else (and (ge (minus (pc) (match_dup 3)) (const_int -2046)) (le (minus (pc) (match_dup 3)) (const_int 2045))) (const_int 3) (if_then_else (match_test “!AVR_HAVE_JMP_CALL”) (const_int 3) (const_int 5))))])

(define_insn_and_split “*sbix_branch_tmp_bit7_split” [(set (pc) (if_then_else (match_operator 0 “gelt_operator” [(mem:QI (match_operand 1 “high_io_address_operand” “n”)) (const_int 0)]) (label_ref (match_operand 2 "" "")) (pc)))] "" “#” “&& reload_completed” [(parallel [(set (pc) (if_then_else (match_operator 0 “gelt_operator” [(mem:QI (match_dup 1)) (const_int 0)]) (label_ref (match_dup 2)) (pc))) (clobber (reg:CC REG_CC))])])

(define_insn “*sbix_branch_tmp_bit7” [(set (pc) (if_then_else (match_operator 0 “gelt_operator” [(mem:QI (match_operand 1 “high_io_address_operand” “n”)) (const_int 0)]) (label_ref (match_operand 2 "" "")) (pc))) (clobber (reg:CC REG_CC))] “reload_completed” { operands[3] = operands[2]; operands[2] = GEN_INT (7); return avr_out_sbxx_branch (insn, operands); } [(set (attr “length”) (if_then_else (and (ge (minus (pc) (match_dup 2)) (const_int -2046)) (le (minus (pc) (match_dup 2)) (const_int 2045))) (const_int 3) (if_then_else (match_test “!AVR_HAVE_JMP_CALL”) (const_int 3) (const_int 5))))])

;; ************************* Peepholes ********************************

(define_peephole ; “*dec-and-branchsi!=-1.d.clobber” [(parallel [(set (match_operand:SI 0 “d_register_operand” "") (plus:SI (match_dup 0) (const_int -1))) (clobber (scratch:QI)) (clobber (reg:CC REG_CC))]) (parallel [(set (reg:CC REG_CC) (compare:CC (match_dup 0) (const_int -1))) (clobber (match_operand:QI 1 “d_register_operand” ""))]) (parallel [(set (pc) (if_then_else (eqne (reg:CC REG_CC) (const_int 0)) (label_ref (match_operand 2 "" "")) (pc))) (clobber (reg:CC REG_CC))])] "" { const char *op; int jump_mode; if (test_hard_reg_class (ADDW_REGS, operands[0])) output_asm_insn (“sbiw %0,1” CR_TAB “sbc %C0,zero_reg” CR_TAB “sbc %D0,zero_reg”, operands); else output_asm_insn (“subi %A0,1” CR_TAB “sbc %B0,zero_reg” CR_TAB “sbc %C0,zero_reg” CR_TAB “sbc %D0,zero_reg”, operands);

jump_mode = avr_jump_mode (operands[2], insn);
op = ((EQ == <CODE>) ^ (jump_mode == 1)) ? "brcc" : "brcs";
operands[1] = gen_rtx_CONST_STRING (VOIDmode, op);

switch (jump_mode)
  {
  case 1: return "%1 %2";
  case 2: return "%1 .+2\;rjmp %2";
  case 3: return "%1 .+4\;jmp %2";
  }

gcc_unreachable();
return "";

})

(define_peephole ; “*dec-and-branchhi!=-1” [(parallel [(set (match_operand:HI 0 “d_register_operand” "") (plus:HI (match_dup 0) (const_int -1))) (clobber (reg:CC REG_CC))]) (parallel [(set (reg:CC REG_CC) (compare:CC (match_dup 0) (const_int -1))) (clobber (match_operand:QI 1 “d_register_operand” ""))]) (parallel [(set (pc) (if_then_else (eqne (reg:CC REG_CC) (const_int 0)) (label_ref (match_operand 2 "" "")) (pc))) (clobber (reg:CC REG_CC))])] "" { const char *op; int jump_mode; if (test_hard_reg_class (ADDW_REGS, operands[0])) output_asm_insn (“sbiw %0,1”, operands); else output_asm_insn (“subi %A0,1” CR_TAB “sbc %B0,zero_reg”, operands);

jump_mode = avr_jump_mode (operands[2], insn);
op = ((EQ == <CODE>) ^ (jump_mode == 1)) ? "brcc" : "brcs";
operands[1] = gen_rtx_CONST_STRING (VOIDmode, op);

switch (jump_mode)
  {
  case 1: return "%1 %2";
  case 2: return "%1 .+2\;rjmp %2";
  case 3: return "%1 .+4\;jmp %2";
  }

gcc_unreachable();
return "";

})

;; Same as above but with clobber flavour of addhi3 (define_peephole ; “*dec-and-branchhi!=-1.d.clobber” [(parallel [(set (match_operand:HI 0 “d_register_operand” "") (plus:HI (match_dup 0) (const_int -1))) (clobber (scratch:QI)) (clobber (reg:CC REG_CC))]) (parallel [(set (reg:CC REG_CC) (compare:CC (match_dup 0) (const_int -1))) (clobber (match_operand:QI 1 “d_register_operand” ""))]) (parallel [(set (pc) (if_then_else (eqne (reg:CC REG_CC) (const_int 0)) (label_ref (match_operand 2 "" "")) (pc))) (clobber (reg:CC REG_CC))])] "" { const char *op; int jump_mode; if (test_hard_reg_class (ADDW_REGS, operands[0])) output_asm_insn (“sbiw %0,1”, operands); else output_asm_insn (“subi %A0,1” CR_TAB “sbc %B0,zero_reg”, operands);

jump_mode = avr_jump_mode (operands[2], insn);
op = ((EQ == <CODE>) ^ (jump_mode == 1)) ? "brcc" : "brcs";
operands[1] = gen_rtx_CONST_STRING (VOIDmode, op);

switch (jump_mode)
  {
  case 1: return "%1 %2";
  case 2: return "%1 .+2\;rjmp %2";
  case 3: return "%1 .+4\;jmp %2";
  }

gcc_unreachable();
return "";

})

;; Same as above but with clobber flavour of addhi3 (define_peephole ; “*dec-and-branchhi!=-1.l.clobber” [(parallel [(set (match_operand:HI 0 “l_register_operand” "") (plus:HI (match_dup 0) (const_int -1))) (clobber (match_operand:QI 3 “d_register_operand” "")) (clobber (reg:CC REG_CC))]) (parallel [(set (reg:CC REG_CC) (compare:CC (match_dup 0) (const_int -1))) (clobber (match_operand:QI 1 “d_register_operand” ""))]) (parallel [(set (pc) (if_then_else (eqne (reg:CC REG_CC) (const_int 0)) (label_ref (match_operand 2 "" "")) (pc))) (clobber (reg:CC REG_CC))])] "" { const char *op; int jump_mode; output_asm_insn (“ldi %3,1” CR_TAB “sub %A0,%3” CR_TAB “sbc %B0,zero_reg”, operands);

jump_mode = avr_jump_mode (operands[2], insn);
op = ((EQ == <CODE>) ^ (jump_mode == 1)) ? "brcc" : "brcs";
operands[1] = gen_rtx_CONST_STRING (VOIDmode, op);

switch (jump_mode)
  {
  case 1: return "%1 %2";
  case 2: return "%1 .+2\;rjmp %2";
  case 3: return "%1 .+4\;jmp %2";
  }

gcc_unreachable();
return "";

})

(define_peephole ; “*dec-and-branchqi!=-1” [(parallel [(set (match_operand:QI 0 “d_register_operand” "") (plus:QI (match_dup 0) (const_int -1))) (clobber (reg:CC REG_CC))]) (set (reg:CC REG_CC) (compare:CC (match_dup 0) (const_int -1))) (parallel [(set (pc) (if_then_else (eqne (reg:CC REG_CC) (const_int 0)) (label_ref (match_operand 1 "" "")) (pc))) (clobber (reg:CC REG_CC))])] "" { const char *op; int jump_mode;

output_asm_insn ("subi %A0,1", operands);

jump_mode = avr_jump_mode (operands[1], insn);
op = ((EQ == <CODE>) ^ (jump_mode == 1)) ? "brcc" : "brcs";
operands[0] = gen_rtx_CONST_STRING (VOIDmode, op);

switch (jump_mode)
  {
  case 1: return "%0 %1";
  case 2: return "%0 .+2\;rjmp %1";
  case 3: return "%0 .+4\;jmp %1";
  }

gcc_unreachable();
return "";

})

(define_peephole ; “*cpse.eq” [(set (reg:CC REG_CC) (compare:CC (match_operand:ALL1 1 “register_operand” “r,r”) (match_operand:ALL1 2 “reg_or_0_operand” “r,Y00”))) (parallel [(set (pc) (if_then_else (eq (reg:CC REG_CC) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc))) (clobber (reg:CC REG_CC))])] “jump_over_one_insn_p (insn, operands[0])” “@ cpse %1,%2 cpse %1,zero_reg”)

;; This peephole avoids code like ;; ;; TST Rn ; cmpqi3 ;; BREQ .+2 ; branch ;; RJMP .Lm ;; ;; Notice that the peephole is always shorter than cmpqi + branch. ;; The reason to write it as peephole is that sequences like ;; ;; AND Rm, Rn ;; BRNE .La ;; ;; shall not be superseeded. With a respective combine pattern ;; the latter sequence would be ;; ;; AND Rm, Rn ;; CPSE Rm, zero_reg ;; RJMP .La ;; ;; and thus longer and slower and not easy to be rolled back.

(define_peephole ; “*cpse.ne” [(set (reg:CC REG_CC) (compare:CC (match_operand:ALL1 1 “register_operand” "") (match_operand:ALL1 2 “reg_or_0_operand” ""))) (parallel [(set (pc) (if_then_else (ne (reg:CC REG_CC) (const_int 0)) (label_ref (match_operand 0 "" "")) (pc))) (clobber (reg:CC REG_CC))])] “!AVR_HAVE_JMP_CALL || !TARGET_SKIP_BUG” { if (operands[2] == CONST0_RTX (mode)) operands[2] = zero_reg_rtx;

return 3 == avr_jump_mode (operands[0], insn)
  ? "cpse %1,%2\;jmp %0"
  : "cpse %1,%2\;rjmp %0";

})

;;pppppppppppppppppppppppppppppppppppppppppppppppppppp ;;prologue/epilogue support instructions

(define_insn “popqi” [(set (match_operand:QI 0 “register_operand” “=r”) (mem:QI (pre_inc:HI (reg:HI REG_SP))))] "" “pop %0” [(set_attr “length” “1”)])

;; Enable Interrupts (define_expand “enable_interrupt” [(clobber (const_int 0))] "" { rtx mem = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode)); MEM_VOLATILE_P (mem) = 1; emit_insn (gen_cli_sei (const1_rtx, mem)); DONE; })

;; Disable Interrupts (define_expand “disable_interrupt” [(clobber (const_int 0))] "" { rtx mem = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode)); MEM_VOLATILE_P (mem) = 1; emit_insn (gen_cli_sei (const0_rtx, mem)); DONE; })

(define_insn “cli_sei” [(unspec_volatile [(match_operand:QI 0 “const_int_operand” “L,P”)] UNSPECV_ENABLE_IRQS) (set (match_operand:BLK 1 "" "") (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER))] "" “@ cli sei” [(set_attr “length” “1”)])

;; Library prologue saves (define_insn “call_prologue_saves” [(unspec_volatile:HI [(const_int 0)] UNSPECV_PROLOGUE_SAVES) (match_operand:HI 0 “immediate_operand” “i,i”) (set (reg:HI REG_SP) (minus:HI (reg:HI REG_SP) (match_operand:HI 1 “immediate_operand” “i,i”))) (use (reg:HI REG_X)) (clobber (reg:HI REG_Z)) (clobber (reg:CC REG_CC))] "" “ldi r30,lo8(gs(1f)) ldi r31,hi8(gs(1f)) %~jmp prologue_saves+((18 - %0) * 2) 1:” [(set_attr “length” “5,6”) (set_attr “isa” “rjmp,jmp”)])

; epilogue restores using library (define_insn “epilogue_restores” [(unspec_volatile:QI [(const_int 0)] UNSPECV_EPILOGUE_RESTORES) (set (reg:HI REG_Y) (plus:HI (reg:HI REG_Y) (match_operand:HI 0 “immediate_operand” “i,i”))) (set (reg:HI REG_SP) (plus:HI (reg:HI REG_Y) (match_dup 0))) (clobber (reg:QI REG_Z)) (clobber (reg:CC REG_CC))] "" “ldi r30, lo8(%0) %~jmp epilogue_restores + ((18 - %0) * 2)” [(set_attr “length” “2,3”) (set_attr “isa” “rjmp,jmp”)])

;; $0 = Chunk: 1 = Prologue, 2 = Epilogue ;; $1 = Register as printed by chunk 0 (Done) in final postscan. (define_expand “gasisr” [(parallel [(unspec_volatile [(match_operand:QI 0 “const_int_operand”) (match_operand:QI 1 “const_int_operand”)] UNSPECV_GASISR) (set (reg:HI REG_SP) (unspec_volatile:HI [(reg:HI REG_SP)] UNSPECV_GASISR)) (set (match_dup 2) (unspec_volatile:BLK [(match_dup 2)] UNSPECV_MEMORY_BARRIER)) (clobber (reg:CC REG_CC))])] “avr_gasisr_prologues” { operands[2] = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode)); MEM_VOLATILE_P (operands[2]) = 1; })

(define_insn “*gasisr” [(unspec_volatile [(match_operand:QI 0 “const_int_operand” “P,K”) (match_operand:QI 1 “const_int_operand” “n,n”)] UNSPECV_GASISR) (set (reg:HI REG_SP) (unspec_volatile:HI [(reg:HI REG_SP)] UNSPECV_GASISR)) (set (match_operand:BLK 2) (unspec_volatile:BLK [(match_dup 2)] UNSPECV_MEMORY_BARRIER)) (clobber (reg:CC REG_CC))] “avr_gasisr_prologues” “__gcc_isr %0” [(set_attr “length” “6,5”)])

; return (define_insn “return” [(return)] “reload_completed && avr_simple_epilogue ()” “ret” [(set_attr “length” “1”)])

(define_insn “return_from_epilogue” [(return)] “reload_completed && cfun->machine && !(cfun->machine->is_interrupt || cfun->machine->is_signal) && !cfun->machine->is_naked” “ret” [(set_attr “length” “1”)])

(define_insn “return_from_interrupt_epilogue” [(return)] “reload_completed && cfun->machine && (cfun->machine->is_interrupt || cfun->machine->is_signal) && !cfun->machine->is_naked” “reti” [(set_attr “length” “1”)])

(define_insn “return_from_naked_epilogue” [(return)] “reload_completed && cfun->machine && cfun->machine->is_naked” "" [(set_attr “length” “0”)])

(define_expand “prologue” [(const_int 0)] "" { avr_expand_prologue (); DONE; })

(define_expand “epilogue” [(const_int 0)] "" { avr_expand_epilogue (false /* sibcall_p */); DONE; })

(define_expand “sibcall_epilogue” [(const_int 0)] "" { avr_expand_epilogue (true /* sibcall_p */); DONE; })

;; Some instructions resp. instruction sequences available ;; via builtins.

(define_insn_and_split “delay_cycles_1” [(unspec_volatile [(match_operand:QI 0 “const_int_operand” “n”) (const_int 1)] UNSPECV_DELAY_CYCLES) (set (match_operand:BLK 1 "" "") (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER)) (clobber (match_scratch:QI 2 “=&d”))] "" “#” “&& reload_completed” [(parallel [(unspec_volatile [(match_dup 0) (const_int 1)] UNSPECV_DELAY_CYCLES) (set (match_dup 1) (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER)) (clobber (match_dup 2)) (clobber (reg:CC REG_CC))])])

(define_insn “*delay_cycles_1” [(unspec_volatile [(match_operand:QI 0 “const_int_operand” “n”) (const_int 1)] UNSPECV_DELAY_CYCLES) (set (match_operand:BLK 1 "" "") (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER)) (clobber (match_scratch:QI 2 “=&d”)) (clobber (reg:CC REG_CC))] “reload_completed” “ldi %2,lo8(%0) 1: dec %2 brne 1b” [(set_attr “length” “3”)])

(define_insn_and_split “delay_cycles_2” [(unspec_volatile [(match_operand:HI 0 “const_int_operand” “n,n”) (const_int 2)] UNSPECV_DELAY_CYCLES) (set (match_operand:BLK 1 "" "") (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER)) (clobber (match_scratch:HI 2 “=&w,&d”))] "" “#” “&& reload_completed” [(parallel [(unspec_volatile [(match_dup 0) (const_int 2)] UNSPECV_DELAY_CYCLES) (set (match_dup 1) (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER)) (clobber (match_dup 2)) (clobber (reg:CC REG_CC))])] "" [(set_attr “isa” “no_tiny,tiny”)])

(define_insn “*delay_cycles_2” [(unspec_volatile [(match_operand:HI 0 “const_int_operand” “n,n”) (const_int 2)] UNSPECV_DELAY_CYCLES) (set (match_operand:BLK 1 "" "") (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER)) (clobber (match_scratch:HI 2 “=&w,&d”)) (clobber (reg:CC REG_CC))] “reload_completed” “@ ldi %A2,lo8(%0);ldi %B2,hi8(%0)\n1: sbiw %A2,1;brne 1b ldi %A2,lo8(%0);ldi %B2,hi8(%0)\n1: subi %A2,1;sbci %B2,0;brne 1b” [(set_attr “length” “4,5”) (set_attr “isa” “no_tiny,tiny”)])

(define_insn_and_split “delay_cycles_3” [(unspec_volatile [(match_operand:SI 0 “const_int_operand” “n”) (const_int 3)] UNSPECV_DELAY_CYCLES) (set (match_operand:BLK 1 "" "") (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER)) (clobber (match_scratch:QI 2 “=&d”)) (clobber (match_scratch:QI 3 “=&d”)) (clobber (match_scratch:QI 4 “=&d”))] "" “#” “&& reload_completed” [(parallel [(unspec_volatile [(match_dup 0) (const_int 3)] UNSPECV_DELAY_CYCLES) (set (match_dup 1) (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER)) (clobber (match_dup 2)) (clobber (match_dup 3)) (clobber (match_dup 4)) (clobber (reg:CC REG_CC))])])

(define_insn “*delay_cycles_3” [(unspec_volatile [(match_operand:SI 0 “const_int_operand” “n”) (const_int 3)] UNSPECV_DELAY_CYCLES) (set (match_operand:BLK 1 "" "") (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER)) (clobber (match_scratch:QI 2 “=&d”)) (clobber (match_scratch:QI 3 “=&d”)) (clobber (match_scratch:QI 4 “=&d”)) (clobber (reg:CC REG_CC))] “reload_completed” “ldi %2,lo8(%0) ldi %3,hi8(%0) ldi %4,hlo8(%0) 1: subi %2,1 sbci %3,0 sbci %4,0 brne 1b” [(set_attr “length” “7”)])

(define_insn_and_split “delay_cycles_4” [(unspec_volatile [(match_operand:SI 0 “const_int_operand” “n”) (const_int 4)] UNSPECV_DELAY_CYCLES) (set (match_operand:BLK 1 "" "") (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER)) (clobber (match_scratch:QI 2 “=&d”)) (clobber (match_scratch:QI 3 “=&d”)) (clobber (match_scratch:QI 4 “=&d”)) (clobber (match_scratch:QI 5 “=&d”))] "" “#” “&& reload_completed” [(parallel [(unspec_volatile [(match_dup 0) (const_int 4)] UNSPECV_DELAY_CYCLES) (set (match_dup 1) (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER)) (clobber (match_dup 2)) (clobber (match_dup 3)) (clobber (match_dup 4)) (clobber (match_dup 5)) (clobber (reg:CC REG_CC))])])

(define_insn “*delay_cycles_4” [(unspec_volatile [(match_operand:SI 0 “const_int_operand” “n”) (const_int 4)] UNSPECV_DELAY_CYCLES) (set (match_operand:BLK 1 "" "") (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER)) (clobber (match_scratch:QI 2 “=&d”)) (clobber (match_scratch:QI 3 “=&d”)) (clobber (match_scratch:QI 4 “=&d”)) (clobber (match_scratch:QI 5 “=&d”)) (clobber (reg:CC REG_CC))] “reload_completed” “ldi %2,lo8(%0) ldi %3,hi8(%0) ldi %4,hlo8(%0) ldi %5,hhi8(%0) 1: subi %2,1 sbci %3,0 sbci %4,0 sbci %5,0 brne 1b” [(set_attr “length” “9”)])

;; __builtin_avr_insert_bits

(define_insn_and_split “insert_bits” [(set (match_operand:QI 0 “register_operand” “=r ,d ,r”) (unspec:QI [(match_operand:SI 1 “const_int_operand” “C0f,Cxf,C0f”) (match_operand:QI 2 “register_operand” “r ,r ,r”) (match_operand:QI 3 “nonmemory_operand” “n ,0 ,0”)] UNSPEC_INSERT_BITS))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (unspec:QI [(match_dup 1) (match_dup 2) (match_dup 3)] UNSPEC_INSERT_BITS)) (clobber (reg:CC REG_CC))])])

(define_insn “*insert_bits” [(set (match_operand:QI 0 “register_operand” “=r ,d ,r”) (unspec:QI [(match_operand:SI 1 “const_int_operand” “C0f,Cxf,C0f”) (match_operand:QI 2 “register_operand” “r ,r ,r”) (match_operand:QI 3 “nonmemory_operand” “n ,0 ,0”)] UNSPEC_INSERT_BITS)) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_insert_bits (operands, NULL); } [(set_attr “adjust_len” “insert_bits”)])

;; __builtin_avr_flash_segment

;; Just a helper for the next “official” expander.

(define_expand “flash_segment1” [(set (match_operand:QI 0 “register_operand” "") (subreg:QI (match_operand:PSI 1 “register_operand” "") 2)) (set (pc) (if_then_else (ge (match_dup 0) (const_int 0)) (label_ref (match_operand 2 "" "")) (pc))) (set (match_dup 0) (const_int -1))])

(define_insn_and_split “*flash_segment1” [(set (pc) (if_then_else (ge (match_operand:QI 0 “register_operand” "") (const_int 0)) (label_ref (match_operand 1 "" "")) (pc)))] "" “#” “reload_completed” [(set (reg:CC REG_CC) (compare:CC (match_dup 0) (const_int 0))) (set (pc) (if_then_else (ge (reg:CC REG_CC) (const_int 0)) (label_ref (match_dup 1)) (pc)))] "")

(define_expand “flash_segment” [(parallel [(match_operand:QI 0 “register_operand” "") (match_operand:PSI 1 “register_operand” "")])] "" { rtx label = gen_label_rtx (); emit (gen_flash_segment1 (operands[0], operands[1], label)); emit_label (label); DONE; })

;; Actually, it's too late now to work out address spaces known at compiletime. ;; Best place would be to fold ADDR_SPACE_CONVERT_EXPR in avr_fold_builtin. ;; However, avr_addr_space_convert can add some built-in knowledge for PSTR ;; so that ADDR_SPACE_CONVERT_EXPR in the built-in must not be resolved.

(define_insn_and_split “*split.flash_segment” [(set (match_operand:QI 0 “register_operand” “=d”) (subreg:QI (lo_sum:PSI (match_operand:QI 1 “nonmemory_operand” “ri”) (match_operand:HI 2 “register_operand” “r”)) 2))] "" { gcc_unreachable(); } "" [(set (match_dup 0) (match_dup 1))])

;; Parity

;; Postpone expansion of 16-bit parity to libgcc call until after combine for ;; better 8-bit parity recognition.

(define_expand “parityhi2” [(parallel [(set (match_operand:HI 0 “register_operand” "") (parity:HI (match_operand:HI 1 “register_operand” ""))) (clobber (reg:HI 24))])])

(define_insn_and_split “*parityhi2” [(set (match_operand:HI 0 “register_operand” “=r”) (parity:HI (match_operand:HI 1 “register_operand” “r”))) (clobber (reg:HI 24))] “!reload_completed” { gcc_unreachable(); } “&& 1” [(set (reg:HI 24) (match_dup 1)) (set (reg:HI 24) (parity:HI (reg:HI 24))) (set (match_dup 0) (reg:HI 24))])

(define_insn_and_split “*parityqihi2” [(set (match_operand:HI 0 “register_operand” “=r”) (parity:HI (match_operand:QI 1 “register_operand” “r”))) (clobber (reg:HI 24))] “!reload_completed” { gcc_unreachable(); } “&& 1” [(set (reg:QI 24) (match_dup 1)) (set (reg:HI 24) (zero_extend:HI (parity:QI (reg:QI 24)))) (set (match_dup 0) (reg:HI 24))])

(define_expand “paritysi2” [(set (reg:SI 22) (match_operand:SI 1 “register_operand” "")) (set (reg:HI 24) (truncate:HI (parity:SI (reg:SI 22)))) (set (match_dup 2) (reg:HI 24)) (set (match_operand:SI 0 “register_operand” "") (zero_extend:SI (match_dup 2)))] "" { operands[2] = gen_reg_rtx (HImode); })

(define_insn_and_split “*parityhi2.libgcc_split” [(set (reg:HI 24) (parity:HI (reg:HI 24)))] "" “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (parity:HI (reg:HI 24))) (clobber (reg:CC REG_CC))])])

(define_insn “*parityhi2.libgcc” [(set (reg:HI 24) (parity:HI (reg:HI 24))) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __parityhi2” [(set_attr “type” “xcall”)])

(define_insn_and_split “*parityqihi2.libgcc_split” [(set (reg:HI 24) (zero_extend:HI (parity:QI (reg:QI 24))))] "" “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (zero_extend:HI (parity:QI (reg:QI 24)))) (clobber (reg:CC REG_CC))])])

(define_insn “*parityqihi2.libgcc” [(set (reg:HI 24) (zero_extend:HI (parity:QI (reg:QI 24)))) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __parityqi2” [(set_attr “type” “xcall”)])

(define_insn_and_split “*paritysihi2.libgcc_split” [(set (reg:HI 24) (truncate:HI (parity:SI (reg:SI 22))))] "" “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (truncate:HI (parity:SI (reg:SI 22)))) (clobber (reg:CC REG_CC))])])

(define_insn “*paritysihi2.libgcc” [(set (reg:HI 24) (truncate:HI (parity:SI (reg:SI 22)))) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __paritysi2” [(set_attr “type” “xcall”)])

;; Popcount

(define_expand “popcounthi2” [(set (reg:HI 24) (match_operand:HI 1 “register_operand” "")) (set (reg:HI 24) (popcount:HI (reg:HI 24))) (set (match_operand:HI 0 “register_operand” "") (reg:HI 24))] "" "")

(define_expand “popcountsi2” [(set (reg:SI 22) (match_operand:SI 1 “register_operand” "")) (set (reg:HI 24) (truncate:HI (popcount:SI (reg:SI 22)))) (set (match_dup 2) (reg:HI 24)) (set (match_operand:SI 0 “register_operand” "") (zero_extend:SI (match_dup 2)))] "" { operands[2] = gen_reg_rtx (HImode); })

(define_insn_and_split “*popcounthi2.libgcc_split” [(set (reg:HI 24) (popcount:HI (reg:HI 24)))] "" “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (popcount:HI (reg:HI 24))) (clobber (reg:CC REG_CC))])])

(define_insn “*popcounthi2.libgcc” [(set (reg:HI 24) (popcount:HI (reg:HI 24))) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __popcounthi2” [(set_attr “type” “xcall”)])

(define_insn_and_split “*popcountsi2.libgcc_split” [(set (reg:HI 24) (truncate:HI (popcount:SI (reg:SI 22))))] "" “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (truncate:HI (popcount:SI (reg:SI 22)))) (clobber (reg:CC REG_CC))])])

(define_insn “*popcountsi2.libgcc” [(set (reg:HI 24) (truncate:HI (popcount:SI (reg:SI 22)))) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __popcountsi2” [(set_attr “type” “xcall”)])

(define_insn_and_split “*popcountqi2.libgcc_split” [(set (reg:QI 24) (popcount:QI (reg:QI 24)))] "" “#” “&& reload_completed” [(parallel [(set (reg:QI 24) (popcount:QI (reg:QI 24))) (clobber (reg:CC REG_CC))])])

(define_insn “*popcountqi2.libgcc” [(set (reg:QI 24) (popcount:QI (reg:QI 24))) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __popcountqi2” [(set_attr “type” “xcall”)])

(define_insn_and_split “*popcountqihi2.libgcc” [(set (reg:HI 24) (zero_extend:HI (popcount:QI (reg:QI 24))))] "" “#” "" [(set (reg:QI 24) (popcount:QI (reg:QI 24))) (set (reg:QI 25) (const_int 0))])

;; Count Leading Zeros

(define_expand “clzhi2” [(set (reg:HI 24) (match_operand:HI 1 “register_operand” "")) (parallel [(set (reg:HI 24) (clz:HI (reg:HI 24))) (clobber (reg:QI 26))]) (set (match_operand:HI 0 “register_operand” "") (reg:HI 24))])

(define_expand “clzsi2” [(set (reg:SI 22) (match_operand:SI 1 “register_operand” "")) (parallel [(set (reg:HI 24) (truncate:HI (clz:SI (reg:SI 22)))) (clobber (reg:QI 26))]) (set (match_dup 2) (reg:HI 24)) (set (match_operand:SI 0 “register_operand” "") (zero_extend:SI (match_dup 2)))] "" { operands[2] = gen_reg_rtx (HImode); })

(define_insn_and_split “*clzhi2.libgcc_split” [(set (reg:HI 24) (clz:HI (reg:HI 24))) (clobber (reg:QI 26))] "" “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (clz:HI (reg:HI 24))) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))])])

(define_insn “*clzhi2.libgcc” [(set (reg:HI 24) (clz:HI (reg:HI 24))) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __clzhi2” [(set_attr “type” “xcall”)])

(define_insn_and_split “*clzsihi2.libgcc_split” [(set (reg:HI 24) (truncate:HI (clz:SI (reg:SI 22)))) (clobber (reg:QI 26))] "" “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (truncate:HI (clz:SI (reg:SI 22)))) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))])])

(define_insn “*clzsihi2.libgcc” [(set (reg:HI 24) (truncate:HI (clz:SI (reg:SI 22)))) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __clzsi2” [(set_attr “type” “xcall”)])

;; Count Trailing Zeros

(define_expand “ctzhi2” [(set (reg:HI 24) (match_operand:HI 1 “register_operand” "")) (parallel [(set (reg:HI 24) (ctz:HI (reg:HI 24))) (clobber (reg:QI 26))]) (set (match_operand:HI 0 “register_operand” "") (reg:HI 24))])

(define_expand “ctzsi2” [(set (reg:SI 22) (match_operand:SI 1 “register_operand” "")) (parallel [(set (reg:HI 24) (truncate:HI (ctz:SI (reg:SI 22)))) (clobber (reg:QI 22)) (clobber (reg:QI 26))]) (set (match_dup 2) (reg:HI 24)) (set (match_operand:SI 0 “register_operand” "") (zero_extend:SI (match_dup 2)))] "" { operands[2] = gen_reg_rtx (HImode); })

(define_insn_and_split “*ctzhi2.libgcc_split” [(set (reg:HI 24) (ctz:HI (reg:HI 24))) (clobber (reg:QI 26))] "" “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (ctz:HI (reg:HI 24))) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))])])

(define_insn “*ctzhi2.libgcc” [(set (reg:HI 24) (ctz:HI (reg:HI 24))) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __ctzhi2” [(set_attr “type” “xcall”)])

(define_insn_and_split “*ctzsihi2.libgcc_split” [(set (reg:HI 24) (truncate:HI (ctz:SI (reg:SI 22)))) (clobber (reg:QI 22)) (clobber (reg:QI 26))] "" “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (truncate:HI (ctz:SI (reg:SI 22)))) (clobber (reg:QI 22)) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))])])

(define_insn “*ctzsihi2.libgcc” [(set (reg:HI 24) (truncate:HI (ctz:SI (reg:SI 22)))) (clobber (reg:QI 22)) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __ctzsi2” [(set_attr “type” “xcall”)])

;; Find First Set

(define_expand “ffshi2” [(set (reg:HI 24) (match_operand:HI 1 “register_operand” "")) (parallel [(set (reg:HI 24) (ffs:HI (reg:HI 24))) (clobber (reg:QI 26))]) (set (match_operand:HI 0 “register_operand” "") (reg:HI 24))])

(define_expand “ffssi2” [(set (reg:SI 22) (match_operand:SI 1 “register_operand” "")) (parallel [(set (reg:HI 24) (truncate:HI (ffs:SI (reg:SI 22)))) (clobber (reg:QI 22)) (clobber (reg:QI 26))]) (set (match_dup 2) (reg:HI 24)) (set (match_operand:SI 0 “register_operand” "") (zero_extend:SI (match_dup 2)))] "" { operands[2] = gen_reg_rtx (HImode); })

(define_insn_and_split “*ffshi2.libgcc_split” [(set (reg:HI 24) (ffs:HI (reg:HI 24))) (clobber (reg:QI 26))] "" “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (ffs:HI (reg:HI 24))) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))])])

(define_insn “*ffshi2.libgcc” [(set (reg:HI 24) (ffs:HI (reg:HI 24))) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __ffshi2” [(set_attr “type” “xcall”)])

(define_insn_and_split “*ffssihi2.libgcc_split” [(set (reg:HI 24) (truncate:HI (ffs:SI (reg:SI 22)))) (clobber (reg:QI 22)) (clobber (reg:QI 26))] "" “#” “&& reload_completed” [(parallel [(set (reg:HI 24) (truncate:HI (ffs:SI (reg:SI 22)))) (clobber (reg:QI 22)) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))])])

(define_insn “*ffssihi2.libgcc” [(set (reg:HI 24) (truncate:HI (ffs:SI (reg:SI 22)))) (clobber (reg:QI 22)) (clobber (reg:QI 26)) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __ffssi2” [(set_attr “type” “xcall”)])

;; Copysign

(define_insn “copysignsf3” [(set (match_operand:SF 0 “register_operand” “=r”) (unspec:SF [(match_operand:SF 1 “register_operand” “0”) (match_operand:SF 2 “register_operand” “r”)] UNSPEC_COPYSIGN))] "" “bst %D2,7;bld %D0,7” [(set_attr “length” “2”)])

;; Swap Bytes (change byte-endianness)

(define_expand “bswapsi2” [(set (reg:SI 22) (match_operand:SI 1 “register_operand” "")) (set (reg:SI 22) (bswap:SI (reg:SI 22))) (set (match_operand:SI 0 “register_operand” "") (reg:SI 22))])

(define_insn_and_split “*bswapsi2.libgcc_split” [(set (reg:SI 22) (bswap:SI (reg:SI 22)))] "" “#” “&& reload_completed” [(parallel [(set (reg:SI 22) (bswap:SI (reg:SI 22))) (clobber (reg:CC REG_CC))])])

(define_insn “*bswapsi2.libgcc” [(set (reg:SI 22) (bswap:SI (reg:SI 22))) (clobber (reg:CC REG_CC))] “reload_completed” “%~call __bswapsi2” [(set_attr “type” “xcall”)])

;; CPU instructions

;; NOP taking 1 or 2 Ticks (define_expand “nopv” [(parallel [(unspec_volatile [(match_operand:SI 0 “const_int_operand” "")] UNSPECV_NOP) (set (match_dup 1) (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER))])] "" { operands[1] = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode)); MEM_VOLATILE_P (operands[1]) = 1; })

(define_insn “*nopv” [(unspec_volatile [(match_operand:SI 0 “const_int_operand” “P,K”)] UNSPECV_NOP) (set (match_operand:BLK 1 "" "") (unspec_volatile:BLK [(match_dup 1)] UNSPECV_MEMORY_BARRIER))] "" “@ nop rjmp .” [(set_attr “length” “1”)])

;; SLEEP (define_expand “sleep” [(parallel [(unspec_volatile [(const_int 0)] UNSPECV_SLEEP) (set (match_dup 0) (unspec_volatile:BLK [(match_dup 0)] UNSPECV_MEMORY_BARRIER))])] "" { operands[0] = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode)); MEM_VOLATILE_P (operands[0]) = 1; })

(define_insn “*sleep” [(unspec_volatile [(const_int 0)] UNSPECV_SLEEP) (set (match_operand:BLK 0 "" "") (unspec_volatile:BLK [(match_dup 0)] UNSPECV_MEMORY_BARRIER))] "" “sleep” [(set_attr “length” “1”)])

;; WDR (define_expand “wdr” [(parallel [(unspec_volatile [(const_int 0)] UNSPECV_WDR) (set (match_dup 0) (unspec_volatile:BLK [(match_dup 0)] UNSPECV_MEMORY_BARRIER))])] "" { operands[0] = gen_rtx_MEM (BLKmode, gen_rtx_SCRATCH (Pmode)); MEM_VOLATILE_P (operands[0]) = 1; })

(define_insn “*wdr” [(unspec_volatile [(const_int 0)] UNSPECV_WDR) (set (match_operand:BLK 0 "" "") (unspec_volatile:BLK [(match_dup 0)] UNSPECV_MEMORY_BARRIER))] "" “wdr” [(set_attr “length” “1”)])

;; FMUL (define_expand “fmul” [(set (reg:QI 24) (match_operand:QI 1 “register_operand” "")) (set (reg:QI 25) (match_operand:QI 2 “register_operand” "")) (parallel [(set (reg:HI 22) (unspec:HI [(reg:QI 24) (reg:QI 25)] UNSPEC_FMUL)) (clobber (reg:HI 24))]) (set (match_operand:HI 0 “register_operand” "") (reg:HI 22))] "" { if (AVR_HAVE_MUL) { emit_insn (gen_fmul_insn (operand0, operand1, operand2)); DONE; } avr_fix_inputs (operands, 1 << 2, regmask (QImode, 24)); })

(define_insn_and_split “fmul_insn” [(set (match_operand:HI 0 “register_operand” “=r”) (unspec:HI [(match_operand:QI 1 “register_operand” “a”) (match_operand:QI 2 “register_operand” “a”)] UNSPEC_FMUL))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (unspec:HI [(match_dup 1) (match_dup 2)] UNSPEC_FMUL)) (clobber (reg:CC REG_CC))])])

(define_insn “*fmul_insn” [(set (match_operand:HI 0 “register_operand” “=r”) (unspec:HI [(match_operand:QI 1 “register_operand” “a”) (match_operand:QI 2 “register_operand” “a”)] UNSPEC_FMUL)) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “fmul %1,%2 movw %0,r0 clr zero_reg” [(set_attr “length” “3”)])

(define_insn_and_split “*fmul.call_split” [(set (reg:HI 22) (unspec:HI [(reg:QI 24) (reg:QI 25)] UNSPEC_FMUL)) (clobber (reg:HI 24))] “!AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:HI 22) (unspec:HI [(reg:QI 24) (reg:QI 25)] UNSPEC_FMUL)) (clobber (reg:HI 24)) (clobber (reg:CC REG_CC))])])

(define_insn “*fmul.call” [(set (reg:HI 22) (unspec:HI [(reg:QI 24) (reg:QI 25)] UNSPEC_FMUL)) (clobber (reg:HI 24)) (clobber (reg:CC REG_CC))] “!AVR_HAVE_MUL && reload_completed” “%~call __fmul” [(set_attr “type” “xcall”)])

;; FMULS (define_expand “fmuls” [(set (reg:QI 24) (match_operand:QI 1 “register_operand” "")) (set (reg:QI 25) (match_operand:QI 2 “register_operand” "")) (parallel [(set (reg:HI 22) (unspec:HI [(reg:QI 24) (reg:QI 25)] UNSPEC_FMULS)) (clobber (reg:HI 24))]) (set (match_operand:HI 0 “register_operand” "") (reg:HI 22))] "" { if (AVR_HAVE_MUL) { emit_insn (gen_fmuls_insn (operand0, operand1, operand2)); DONE; } avr_fix_inputs (operands, 1 << 2, regmask (QImode, 24)); })

(define_insn_and_split “fmuls_insn” [(set (match_operand:HI 0 “register_operand” “=r”) (unspec:HI [(match_operand:QI 1 “register_operand” “a”) (match_operand:QI 2 “register_operand” “a”)] UNSPEC_FMULS))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (unspec:HI [(match_dup 1) (match_dup 2)] UNSPEC_FMULS)) (clobber (reg:CC REG_CC))])])

(define_insn “*fmuls_insn” [(set (match_operand:HI 0 “register_operand” “=r”) (unspec:HI [(match_operand:QI 1 “register_operand” “a”) (match_operand:QI 2 “register_operand” “a”)] UNSPEC_FMULS)) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “fmuls %1,%2 movw %0,r0 clr zero_reg” [(set_attr “length” “3”)])

(define_insn_and_split “*fmuls.call_split” [(set (reg:HI 22) (unspec:HI [(reg:QI 24) (reg:QI 25)] UNSPEC_FMULS)) (clobber (reg:HI 24))] “!AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:HI 22) (unspec:HI [(reg:QI 24) (reg:QI 25)] UNSPEC_FMULS)) (clobber (reg:HI 24)) (clobber (reg:CC REG_CC))])])

(define_insn “*fmuls.call” [(set (reg:HI 22) (unspec:HI [(reg:QI 24) (reg:QI 25)] UNSPEC_FMULS)) (clobber (reg:HI 24)) (clobber (reg:CC REG_CC))] “!AVR_HAVE_MUL && reload_completed” “%~call __fmuls” [(set_attr “type” “xcall”)])

;; FMULSU (define_expand “fmulsu” [(set (reg:QI 24) (match_operand:QI 1 “register_operand” "")) (set (reg:QI 25) (match_operand:QI 2 “register_operand” "")) (parallel [(set (reg:HI 22) (unspec:HI [(reg:QI 24) (reg:QI 25)] UNSPEC_FMULSU)) (clobber (reg:HI 24))]) (set (match_operand:HI 0 “register_operand” "") (reg:HI 22))] "" { if (AVR_HAVE_MUL) { emit_insn (gen_fmulsu_insn (operand0, operand1, operand2)); DONE; } avr_fix_inputs (operands, 1 << 2, regmask (QImode, 24)); })

(define_insn_and_split “fmulsu_insn” [(set (match_operand:HI 0 “register_operand” “=r”) (unspec:HI [(match_operand:QI 1 “register_operand” “a”) (match_operand:QI 2 “register_operand” “a”)] UNSPEC_FMULSU))] “AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (match_dup 0) (unspec:HI [(match_dup 1) (match_dup 2)] UNSPEC_FMULSU)) (clobber (reg:CC REG_CC))])])

(define_insn “*fmulsu_insn” [(set (match_operand:HI 0 “register_operand” “=r”) (unspec:HI [(match_operand:QI 1 “register_operand” “a”) (match_operand:QI 2 “register_operand” “a”)] UNSPEC_FMULSU)) (clobber (reg:CC REG_CC))] “AVR_HAVE_MUL && reload_completed” “fmulsu %1,%2 movw %0,r0 clr zero_reg” [(set_attr “length” “3”)])

(define_insn_and_split “*fmulsu.call_split” [(set (reg:HI 22) (unspec:HI [(reg:QI 24) (reg:QI 25)] UNSPEC_FMULSU)) (clobber (reg:HI 24))] “!AVR_HAVE_MUL” “#” “&& reload_completed” [(parallel [(set (reg:HI 22) (unspec:HI [(reg:QI 24) (reg:QI 25)] UNSPEC_FMULSU)) (clobber (reg:HI 24)) (clobber (reg:CC REG_CC))])])

(define_insn “*fmulsu.call” [(set (reg:HI 22) (unspec:HI [(reg:QI 24) (reg:QI 25)] UNSPEC_FMULSU)) (clobber (reg:HI 24)) (clobber (reg:CC REG_CC))] “!AVR_HAVE_MUL && reload_completed” “%~call __fmulsu” [(set_attr “type” “xcall”) ])

 ;; Some combiner patterns dealing with bits. ;; See PR42210

;; Move bit $3.0 into bit $0.$4 (define_insn “*movbitqi.1-6.a” [(set (match_operand:QI 0 “register_operand” “=r”) (ior:QI (and:QI (match_operand:QI 1 “register_operand” “0”) (match_operand:QI 2 “single_zero_operand” “n”)) (and:QI (ashift:QI (match_operand:QI 3 “register_operand” “r”) (match_operand:QI 4 “const_0_to_7_operand” “n”)) (match_operand:QI 5 “single_one_operand” “n”))))] “INTVAL(operands[4]) == exact_log2 (~INTVAL(operands[2]) & GET_MODE_MASK (QImode)) && INTVAL(operands[4]) == exact_log2 (INTVAL(operands[5]) & GET_MODE_MASK (QImode))” “bst %3,0;bld %0,%4” [(set_attr “length” “2”)])

;; Move bit $3.0 into bit $0.$4 ;; Variation of above. Unfortunately, there is no canonicalized representation ;; of moving around bits. So what we see here depends on how user writes down ;; bit manipulations. (define_insn “*movbitqi.1-6.b” [(set (match_operand:QI 0 “register_operand” “=r”) (ior:QI (and:QI (match_operand:QI 1 “register_operand” “0”) (match_operand:QI 2 “single_zero_operand” “n”)) (ashift:QI (and:QI (match_operand:QI 3 “register_operand” “r”) (const_int 1)) (match_operand:QI 4 “const_0_to_7_operand” “n”))))] “INTVAL(operands[4]) == exact_log2 (~INTVAL(operands[2]) & GET_MODE_MASK (QImode))” “bst %3,0;bld %0,%4” [(set_attr “length” “2”)])

;; Move bit $3.0 into bit $0.0. ;; For bit 0, combiner generates slightly different pattern. (define_insn “*movbitqi.0” [(set (match_operand:QI 0 “register_operand” “=r”) (ior:QI (and:QI (match_operand:QI 1 “register_operand” “0”) (match_operand:QI 2 “single_zero_operand” “n”)) (and:QI (match_operand:QI 3 “register_operand” “r”) (const_int 1))))] “0 == exact_log2 (~INTVAL(operands[2]) & GET_MODE_MASK (QImode))” “bst %3,0;bld %0,0” [(set_attr “length” “2”)])

;; Move bit $2.0 into bit $0.7. ;; For bit 7, combiner generates slightly different pattern (define_insn “*movbitqi.7” [(set (match_operand:QI 0 “register_operand” “=r”) (ior:QI (and:QI (match_operand:QI 1 “register_operand” “0”) (const_int 127)) (ashift:QI (match_operand:QI 2 “register_operand” “r”) (const_int 7))))] "" “bst %2,0;bld %0,7” [(set_attr “length” “2”)])

;; Combiner transforms above four pattern into ZERO_EXTRACT if it sees MEM ;; and input/output match. We provide a special pattern for this, because ;; in contrast to a IN/BST/BLD/OUT sequence we need less registers and the ;; operation on I/O is atomic. (define_insn “*insv.io” [(set (zero_extract:QI (mem:QI (match_operand 0 “low_io_address_operand” “i,i,i”)) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n,n,n”)) (match_operand:QI 2 “nonmemory_operand” “L,P,r”))] "" “@ cbi %i0,%1 sbi %i0,%1 sbrc %2,0;sbi %i0,%1;sbrs %2,0;cbi %i0,%1” [(set_attr “length” “1,1,4”)])

(define_insn “*insv.not.io” [(set (zero_extract:QI (mem:QI (match_operand 0 “low_io_address_operand” “i”)) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n”)) (not:QI (match_operand:QI 2 “register_operand” “r”)))] "" “sbrs %2,0;sbi %i0,%1;sbrc %2,0;cbi %i0,%1” [(set_attr “length” “4”)])

;; The insv expander. ;; We only support 1-bit inserts (define_expand “insv” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” "") (match_operand:QI 1 “const1_operand” "") ; width (match_operand:QI 2 “const_0_to_7_operand” "")) ; pos (match_operand:QI 3 “nonmemory_operand” ""))] “optimize”)

;; Some more patterns to support moving around one bit which can be accomplished ;; by BST + BLD in most situations. Unfortunately, there is no canonical ;; representation, and we just implement some more cases that are not too ;; complicated.

;; Insert bit $2.0 into $0.$1 (define_insn_and_split “*insv.reg_split” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r,d,d,l,l”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n,n,n,n,n”)) (match_operand:QI 2 “nonmemory_operand” “r,L,P,L,P”))] "" “#” “&& reload_completed” [(parallel [(set (zero_extract:QI (match_dup 0) (const_int 1) (match_dup 1)) (match_dup 2)) (clobber (reg:CC REG_CC))])])

(define_insn “*insv.reg” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r,d,d,l,l”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n,n,n,n,n”)) (match_operand:QI 2 “nonmemory_operand” “r,L,P,L,P”)) (clobber (reg:CC REG_CC))] “reload_completed” “@ bst %2,0;bld %0,%1 andi %0,lo8(~(1<<%1)) ori %0,lo8(1<<%1) clt;bld %0,%1 set;bld %0,%1” [(set_attr “length” “2,1,1,2,2”)])

;; Insert bit $2.$3 into $0.$1 (define_insn “*insv.extract” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n”)) (any_extract:QI (match_operand:QI 2 “register_operand” “r”) (const_int 1) (match_operand:QI 3 “const_0_to_7_operand” “n”)))] "" “bst %2,%3;bld %0,%1” [(set_attr “length” “2”)])

;; Insert bit $2.$3 into $0.$1 (define_insn “*insv.shiftrt” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n”)) (any_shiftrt:QI (match_operand:QI 2 “register_operand” “r”) (match_operand:QI 3 “const_0_to_7_operand” “n”)))] "" “bst %2,%3;bld %0,%1” [(set_attr “length” “2”)])

;; Same, but with a NOT inverting the source bit. ;; Insert bit ~$2.$3 into $0.$1 (define_insn_and_split “*insv.not-shiftrt_split” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n”)) (not:QI (any_shiftrt:QI (match_operand:QI 2 “register_operand” “r”) (match_operand:QI 3 “const_0_to_7_operand” “n”))))] "" “#” “&& reload_completed” [(parallel [(set (zero_extract:QI (match_dup 0) (const_int 1) (match_dup 1)) (not:QI (any_shiftrt:QI (match_dup 2) (match_dup 3)))) (clobber (reg:CC REG_CC))])])

(define_insn “*insv.not-shiftrt” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n”)) (not:QI (any_shiftrt:QI (match_operand:QI 2 “register_operand” “r”) (match_operand:QI 3 “const_0_to_7_operand” “n”)))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_insert_notbit (insn, operands, NULL_RTX, NULL); } [(set_attr “adjust_len” “insv_notbit”)])

;; Insert bit ~$2.0 into $0.$1 (define_insn_and_split “*insv.xor1-bit.0_split” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n”)) (xor:QI (match_operand:QI 2 “register_operand” “r”) (const_int 1)))] "" “#” “&& reload_completed” [(parallel [(set (zero_extract:QI (match_dup 0) (const_int 1) (match_dup 1)) (xor:QI (match_dup 2) (const_int 1))) (clobber (reg:CC REG_CC))])])

(define_insn “*insv.xor1-bit.0” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n”)) (xor:QI (match_operand:QI 2 “register_operand” “r”) (const_int 1))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_insert_notbit (insn, operands, const0_rtx, NULL); } [(set_attr “adjust_len” “insv_notbit_0”)])

;; Insert bit ~$2.0 into $0.$1 (define_insn_and_split “*insv.not-bit.0_split” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n”)) (not:QI (match_operand:QI 2 “register_operand” “r”)))] "" “#” “&& reload_completed” [(parallel [(set (zero_extract:QI (match_dup 0) (const_int 1) (match_dup 1)) (not:QI (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*insv.not-bit.0” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n”)) (not:QI (match_operand:QI 2 “register_operand” “r”))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_insert_notbit (insn, operands, const0_rtx, NULL); } [(set_attr “adjust_len” “insv_notbit_0”)])

;; Insert bit ~$2.7 into $0.$1 (define_insn_and_split “*insv.not-bit.7_split” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n”)) (ge:QI (match_operand:QI 2 “register_operand” “r”) (const_int 0)))] "" “#” “&& reload_completed” [(parallel [(set (zero_extract:QI (match_dup 0) (const_int 1) (match_dup 1)) (ge:QI (match_dup 2) (const_int 0))) (clobber (reg:CC REG_CC))])])

(define_insn “*insv.not-bit.7” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n”)) (ge:QI (match_operand:QI 2 “register_operand” “r”) (const_int 0))) (clobber (reg:CC REG_CC))] “reload_completed” { return avr_out_insert_notbit (insn, operands, GEN_INT (7), NULL); } [(set_attr “adjust_len” “insv_notbit_7”)])

;; Insert bit ~$2.$3 into $0.$1 (define_insn_and_split “*insv.xor-extract_split” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n”)) (any_extract:QI (xor:QI (match_operand:QI 2 “register_operand” “r”) (match_operand:QI 4 “const_int_operand” “n”)) (const_int 1) (match_operand:QI 3 “const_0_to_7_operand” “n”)))] “INTVAL (operands[4]) & (1 << INTVAL (operands[3]))” “#” “&& reload_completed” [(parallel [(set (zero_extract:QI (match_dup 0) (const_int 1) (match_dup 1)) (any_extract:QI (xor:QI (match_dup 2) (match_dup 4)) (const_int 1) (match_dup 3))) (clobber (reg:CC REG_CC))])])

(define_insn “*insv.xor-extract” [(set (zero_extract:QI (match_operand:QI 0 “register_operand” “+r”) (const_int 1) (match_operand:QI 1 “const_0_to_7_operand” “n”)) (any_extract:QI (xor:QI (match_operand:QI 2 “register_operand” “r”) (match_operand:QI 4 “const_int_operand” “n”)) (const_int 1) (match_operand:QI 3 “const_0_to_7_operand” “n”))) (clobber (reg:CC REG_CC))] “INTVAL (operands[4]) & (1 << INTVAL (operands[3])) && reload_completed” { return avr_out_insert_notbit (insn, operands, NULL_RTX, NULL); } [(set_attr “adjust_len” “insv_notbit”)])

 ;; Some combine patterns that try to fix bad code when a value is composed ;; from byte parts like in PR27663. ;; The patterns give some release but the code still is not optimal, ;; in particular when subreg lowering (-fsplit-wide-types) is turned on. ;; That switch obfuscates things here and in many other places.

;; “*iorhiqi.byte0” “*iorpsiqi.byte0” “*iorsiqi.byte0” ;; “*xorhiqi.byte0” “*xorpsiqi.byte0” “*xorsiqi.byte0” (define_insn_and_split “*<code_stdname>qi.byte0” [(set (match_operand:HISI 0 “register_operand” “=r”) (xior:HISI (zero_extend:HISI (match_operand:QI 1 “register_operand” “r”)) (match_operand:HISI 2 “register_operand” “0”)))] "" “#” “reload_completed” [(set (match_dup 3) (xior:QI (match_dup 3) (match_dup 1)))] { operands[3] = simplify_gen_subreg (QImode, operands[0], mode, 0); })

;; “*iorhiqi.byte1-3” “*iorpsiqi.byte1-3” “*iorsiqi.byte1-3” ;; “*xorhiqi.byte1-3” “*xorpsiqi.byte1-3” “*xorsiqi.byte1-3” (define_insn_and_split “*<code_stdname>qi.byte1-3” [(set (match_operand:HISI 0 “register_operand” “=r”) (xior:HISI (ashift:HISI (zero_extend:HISI (match_operand:QI 1 “register_operand” “r”)) (match_operand:QI 2 “const_8_16_24_operand” “n”)) (match_operand:HISI 3 “register_operand” “0”)))] “INTVAL(operands[2]) < GET_MODE_BITSIZE (mode)” “#” “&& reload_completed” [(set (match_dup 4) (xior:QI (match_dup 4) (match_dup 1)))] { int byteno = INTVAL(operands[2]) / BITS_PER_UNIT; operands[4] = simplify_gen_subreg (QImode, operands[0], mode, byteno); })

(define_insn_and_split “*iorhi3.ashift8-ext.zerox” [(set (match_operand:HI 0 “register_operand” “=r,r”) (ior:HI (ashift:HI (any_extend:HI (match_operand:QI 1 “register_operand” “r,r”)) (const_int 8)) (zero_extend:HI (match_operand:QI 2 “register_operand” “0,r”))))] “optimize” { gcc_unreachable(); } “&& reload_completed” [(set (match_dup 1) (xor:QI (match_dup 1) (match_dup 2))) (set (match_dup 2) (xor:QI (match_dup 2) (match_dup 1))) (set (match_dup 1) (xor:QI (match_dup 1) (match_dup 2)))] { rtx hi = simplify_gen_subreg (QImode, operands[0], HImode, 1); rtx lo = simplify_gen_subreg (QImode, operands[0], HImode, 0);

if (!reg_overlap_mentioned_p (hi, operands[2]))
  {
    emit_move_insn (hi, operands[1]);
    emit_move_insn (lo, operands[2]);
    DONE;
  }
else if (!reg_overlap_mentioned_p (lo, operands[1]))
  {
    emit_move_insn (lo, operands[2]);
    emit_move_insn (hi, operands[1]);
    DONE;
  }

gcc_assert (REGNO (operands[1]) == REGNO (operands[0]));
gcc_assert (REGNO (operands[2]) == 1 + REGNO (operands[0]));

})

(define_insn_and_split “*iorhi3.ashift8-ext.reg” [(set (match_operand:HI 0 “register_operand” “=r”) (ior:HI (ashift:HI (any_extend:HI (match_operand:QI 1 “register_operand” “r”)) (const_int 8)) (match_operand:HI 2 “register_operand” “0”)))] “optimize” { gcc_unreachable(); } “&& reload_completed” [(set (match_dup 3) (ior:QI (match_dup 4) (match_dup 1)))] { operands[3] = simplify_gen_subreg (QImode, operands[0], HImode, 1); operands[4] = simplify_gen_subreg (QImode, operands[2], HImode, 1); })

(define_insn_and_split “*iorhi3.ashift8-reg.zerox” [(set (match_operand:HI 0 “register_operand” “=r”) (ior:HI (ashift:HI (match_operand:HI 1 “register_operand” “r”) (const_int 8)) (zero_extend:HI (match_operand:QI 2 “register_operand” “0”))))] “optimize” { gcc_unreachable(); } “&& reload_completed” [(set (match_dup 3) (match_dup 4))] { operands[3] = simplify_gen_subreg (QImode, operands[0], HImode, 1); operands[4] = simplify_gen_subreg (QImode, operands[1], HImode, 0); })

(define_peephole2 [(parallel [(set (match_operand:QI 0 “register_operand”) (const_int 0)) (clobber (reg:CC REG_CC))]) (parallel [(set (match_dup 0) (ior:QI (match_dup 0) (match_operand:QI 1 “register_operand”))) (clobber (reg:CC REG_CC))])] "" [(parallel [(set (match_dup 0) (match_dup 1)) (clobber (reg:CC REG_CC))])])

(define_expand “extzv” [(set (match_operand:QI 0 “register_operand” "") (zero_extract:QI (match_operand:QI 1 “register_operand” "") (match_operand:QI 2 “const1_operand” "") (match_operand:QI 3 “const_0_to_7_operand” "")))])

(define_insn_and_split “*extzv_split” [(set (match_operand:QI 0 “register_operand” “=*d,*d,*d,*d,r”) (zero_extract:QI (match_operand:QI 1 “register_operand” “0,r,0,0,r”) (const_int 1) (match_operand:QI 2 “const_0_to_7_operand” “L,L,P,C04,n”)))] "" “#” “&& reload_completed” [(parallel [(set (match_dup 0) (zero_extract:QI (match_dup 1) (const_int 1) (match_dup 2))) (clobber (reg:CC REG_CC))])])

(define_insn “*extzv” [(set (match_operand:QI 0 “register_operand” “=*d,*d,*d,*d,r”) (zero_extract:QI (match_operand:QI 1 “register_operand” “0,r,0,0,r”) (const_int 1) (match_operand:QI 2 “const_0_to_7_operand” “L,L,P,C04,n”))) (clobber (reg:CC REG_CC))] “reload_completed” “@ andi %0,1 mov %0,%1;andi %0,1 lsr %0;andi %0,1 swap %0;andi %0,1 bst %1,%2;clr %0;bld %0,0” [(set_attr “length” “1,2,2,2,3”)])

(define_insn_and_split “*extzv.qihi1” [(set (match_operand:HI 0 “register_operand” “=r”) (zero_extract:HI (match_operand:QI 1 “register_operand” “r”) (const_int 1) (match_operand:QI 2 “const_0_to_7_operand” “n”)))] "" “#” "" [(set (match_dup 3) (zero_extract:QI (match_dup 1) (const_int 1) (match_dup 2))) (set (match_dup 4) (const_int 0))] { operands[3] = simplify_gen_subreg (QImode, operands[0], HImode, 0); operands[4] = simplify_gen_subreg (QImode, operands[0], HImode, 1); })

(define_insn_and_split “*extzv.qihi2” [(set (match_operand:HI 0 “register_operand” “=r”) (zero_extend:HI (zero_extract:QI (match_operand:QI 1 “register_operand” “r”) (const_int 1) (match_operand:QI 2 “const_0_to_7_operand” “n”))))] "" “#” "" [(set (match_dup 3) (zero_extract:QI (match_dup 1) (const_int 1) (match_dup 2))) (set (match_dup 4) (const_int 0))] { operands[3] = simplify_gen_subreg (QImode, operands[0], HImode, 0); operands[4] = simplify_gen_subreg (QImode, operands[0], HImode, 1); })

;; ??? do_store_flag emits a hard-coded right shift to extract a bit without ;; even considering rtx_costs, extzv, or a bit-test. See PR 55181 for an example. (define_insn_and_split “*extract.subreg.bit” [(set (match_operand:QI 0 “register_operand” “=r”) (and:QI (subreg:QI (any_shiftrt:HISI (match_operand:HISI 1 “register_operand” “r”) (match_operand:QI 2 “const_int_operand” “n”)) 0) (const_int 1)))] “INTVAL (operands[2]) < GET_MODE_BITSIZE (mode)” { gcc_unreachable(); } “&& reload_completed” [;; “*extzv” (set (match_dup 0) (zero_extract:QI (match_dup 3) (const_int 1) (match_dup 4)))] { int bitno = INTVAL (operands[2]); operands[3] = simplify_gen_subreg (QImode, operands[1], mode, bitno / 8); operands[4] = GEN_INT (bitno % 8); })

 ;; Fixed-point instructions (include “avr-fixed.md”)

;; Operations on 64-bit registers (include “avr-dimode.md”)