| # Run tests covering all config.gcc cases. |
| host_options='--with-mpc=/opt/cfarm/mpc' # gcc10 |
| TEST=all-gcc |
| # Make sure you have a recent enough gcc (with ada support) in your path so |
| # that --enable-werror-always will work. |
| # To use, create a build directory with plenty of free disk space - a build of |
| # all configurations can take 450GB. |
| # By default, this file assumes the build directory is in a sibling directory |
| # to the gcc sources, but you can override GCC_SRC_DIR to specify where to |
| # find them. GCC_SRC_DIR is used in the directory below the build directory, |
| # hence the two ".." in the default value; if overriding it, it's easiest to |
| # supply an absolute path. |
| GCC_SRC_DIR=../../gcc |
| |
| # Use -j / -l make arguments and nice to assure a smooth resource-efficient |
| # load on the build machine, e.g. for 24 cores: |
| # svn co svn://gcc.gnu.org/svn/gcc/branches/foo-branch gcc |
| # mkdir multi-mk; cd multi-mk |
| # nohup nice make -j25 -l36 -f ../gcc/contrib/config-list.mk > make.out 2>&1 & |
| # |
| # Alternatively, if building against an existing gcc source tree: |
| # |
| # cd /somewhere/with/plenty/of/disk/space |
| # mkdir multi-mk; cd multi-mk |
| # nohup nice make \ |
| # -j25 -l36 \ |
| # -f /path/to/contrib/config-list.mk \ |
| # GCC_SRC_DIR=/path/to/gcc/source/tree \ |
| # > make.out 2>&1 & |
| # |
| |
| LIST = aarch64-elf aarch64-linux-gnu aarch64-rtems \ |
| alpha-linux-gnu alpha-netbsd alpha-openbsd \ |
| alpha64-dec-vms alpha-dec-vms \ |
| amdgcn-amdhsa \ |
| arc-elf32OPT-with-cpu=arc600 arc-elf32OPT-with-cpu=arc700 \ |
| arc-linux-uclibcOPT-with-cpu=arc700 arceb-linux-uclibcOPT-with-cpu=arc700 \ |
| arm-netbsdelf \ |
| arm-linux-androideabi arm-uclinux_eabi arm-eabi arm-rtems \ |
| arm-symbianelf avr-elf \ |
| bfin-elf bfin-uclinux bfin-linux-uclibc bfin-rtems bfin-openbsd \ |
| bpf-unknown-none \ |
| c6x-elf c6x-uclinux cris-elf \ |
| csky-elf csky-linux-gnu \ |
| epiphany-elf epiphany-elfOPT-with-stack-offset=16 fido-elf \ |
| fr30-elf frv-elf frv-linux ft32-elf h8300-elf hppa-linux-gnu \ |
| hppa-linux-gnuOPT-enable-sjlj-exceptions=yes hppa64-linux-gnu \ |
| hppa64-hpux11.3 \ |
| hppa64-hpux11.0OPT-enable-sjlj-exceptions=yes \ |
| i686-pc-linux-gnu i686-apple-darwin i686-apple-darwin9 i686-apple-darwin10 \ |
| i486-freebsd4 i686-freebsd6 i686-kfreebsd-gnu \ |
| i686-netbsdelf9 \ |
| i686-openbsd i686-elf i686-kopensolaris-gnu i686-symbolics-gnu \ |
| i686-pc-msdosdjgpp i686-lynxos i686-nto-qnx \ |
| i686-rtems i686-solaris2.11 i686-wrs-vxworks \ |
| i686-wrs-vxworksae \ |
| i686-cygwinOPT-enable-threads=yes i686-mingw32crt ia64-elf \ |
| ia64-freebsd6 ia64-linux ia64-hpux ia64-hp-vms iq2000-elf lm32-elf \ |
| lm32-rtems lm32-uclinux \ |
| loongarch64-linux-gnuf64 loongarch64-linux-gnuf32 loongarch64-linux-gnusf \ |
| m32c-elf m32r-elf m32rle-elf \ |
| m68k-elf m68k-netbsdelf \ |
| m68k-uclinux m68k-linux m68k-rtems \ |
| mcore-elf microblaze-linux microblaze-elf \ |
| mips-netbsd \ |
| mips64el-st-linux-gnu mips64octeon-linux mipsisa64r2-linux \ |
| mipsisa32r2-linux-gnu mipsisa64r2-sde-elf mipsisa32-elfoabi \ |
| mipsisa64-elfoabi mipsisa64r2el-elf mipsisa64sr71k-elf mipsisa64sb1-elf \ |
| mipsel-elf mips64-elf mips64vr-elf mips64orion-elf mips-rtems \ |
| mips-wrs-vxworks mipstx39-elf mmix-knuth-mmixware mn10300-elf moxie-elf \ |
| moxie-uclinux moxie-rtems \ |
| msp430-elf msp430-elfbare \ |
| nds32le-elf nds32be-elf \ |
| nios2-elf nios2-linux-gnu nios2-rtems \ |
| nvptx-none \ |
| or1k-elf or1k-linux-uclibc or1k-linux-musl or1k-rtems \ |
| pdp11-aout \ |
| powerpc-darwin8 \ |
| powerpc-darwin7 powerpc64-darwin powerpc-freebsd6 powerpc-netbsd \ |
| powerpc-eabisimaltivec powerpc-eabisim ppc-elf \ |
| powerpc-eabialtivec powerpc-xilinx-eabi powerpc-eabi \ |
| powerpc-rtems \ |
| powerpc64-linux_altivec \ |
| powerpc-wrs-vxworks powerpc-wrs-vxworksae powerpc-wrs-vxworksmils \ |
| powerpc-lynxos powerpcle-elf \ |
| powerpcle-eabisim powerpcle-eabi \ |
| pru-elf \ |
| riscv32-unknown-linux-gnu riscv64-unknown-linux-gnu \ |
| powerpc-ibm-aix7.1 powerpc-ibm-aix7.2 \ |
| rl78-elf rx-elf s390-linux-gnu s390x-linux-gnu s390x-ibm-tpf sh-elf \ |
| shle-linux sh-netbsdelf sh-superh-elf \ |
| sh-rtems sh-wrs-vxworks sparc-elf \ |
| sparc-leon-elf sparc-rtems sparc-linux-gnu \ |
| sparc-leon3-linux-gnuOPT-enable-target=all sparc-netbsdelf \ |
| sparc64-sun-solaris2.11OPT-with-gnu-ldOPT-with-gnu-asOPT-enable-threads=posix \ |
| sparc-wrs-vxworks sparc64-elf sparc64-rtems sparc64-linux sparc64-freebsd6 \ |
| sparc64-netbsd sparc64-openbsd \ |
| v850e1-elf v850e-elf v850-elf v850-rtems vax-linux-gnu \ |
| vax-netbsdelf visium-elf x86_64-apple-darwin \ |
| x86_64-pc-linux-gnuOPT-with-fpmath=avx \ |
| x86_64-elfOPT-with-fpmath=sse x86_64-freebsd6 x86_64-netbsd \ |
| x86_64-w64-mingw32 \ |
| x86_64-mingw32OPT-enable-sjlj-exceptions=yes x86_64-rtems \ |
| xstormy16-elf xtensa-elf \ |
| xtensa-linux |
| |
| LOGFILES = $(patsubst %,log/%-make.out,$(LIST)) |
| all: $(LOGFILES) |
| config: $(LIST) |
| show: |
| @echo $(LIST) |
| |
| .PHONY: make-log-dir all config show |
| |
| empty= |
| |
| #Check for the presence of the MAINTAINERS file to make sure we've located |
| #the gcc sources. |
| make-log-dir: $(GCC_SRC_DIR)/MAINTAINERS |
| -mkdir log |
| |
| $(LIST): make-log-dir |
| -mkdir $@ |
| ( \ |
| cd $@ && \ |
| TGT=`echo $@ | awk 'BEGIN { FS = "OPT" }; { print $$1 }'` && \ |
| TGT=`$(GCC_SRC_DIR)/config.sub $$TGT` && \ |
| case $$TGT in \ |
| *-*-darwin* | *-*-cygwin* | *-*-mingw* | *-*-aix* | bpf-*-*) \ |
| ADDITIONAL_LANGUAGES=""; \ |
| ;; \ |
| *) \ |
| ADDITIONAL_LANGUAGES=",go"; \ |
| ;; \ |
| esac && \ |
| $(GCC_SRC_DIR)/configure \ |
| --target=$(subst SCRIPTS,`pwd`/../scripts/,$(subst OPT,$(empty) -,$@)) \ |
| --enable-werror-always ${host_options} \ |
| --enable-languages=all,ada$$ADDITIONAL_LANGUAGES; \ |
| ) > log/$@-config.out 2>&1 |
| |
| $(LOGFILES) : log/%-make.out : % |
| -$(MAKE) -C $< $(TEST) > $@ 2>&1 && rm -rf $< |