gcc/doc/analyzer.texi

@c Copyright (C) 2019-2022 Free Software Foundation, Inc.
@c This is part of the GCC manual.
@c For copying conditions, see the file gcc.texi.
@c Contributed by David Malcolm <dmalcolm@redhat.com>.

@node Static Analyzer
@chapter Static Analyzer
@cindex analyzer
@cindex static analysis
@cindex static analyzer

@menu
* Analyzer Internals::       Analyzer Internals
* Debugging the Analyzer::   Useful debugging tips
@end menu

@node Analyzer Internals
@section Analyzer Internals
@cindex analyzer, internals
@cindex static analyzer, internals

@subsection Overview

The analyzer implementation works on the gimple-SSA representation.
(I chose this in the hopes of making it easy to work with LTO to
do whole-program analysis).

The implementation is read-only: it doesn't attempt to change anything,
just emit warnings.

The gimple representation can be seen using @option{-fdump-ipa-analyzer}.
@quotation Tip
If the analyzer ICEs before this is written out, one workaround is to use
@option{--param=analyzer-bb-explosion-factor=0} to force the analyzer
to bail out after analyzing the first basic block.
@end quotation

First, we build a @code{supergraph} which combines the callgraph and all
of the CFGs into a single directed graph, with both interprocedural and
intraprocedural edges.  The nodes and edges in the supergraph are called
``supernodes'' and ``superedges'', and often referred to in code as
@code{snodes} and @code{sedges}.  Basic blocks in the CFGs are split at
interprocedural calls, so there can be more than one supernode per
basic block.  Most statements will be in just one supernode, but a call
statement can appear in two supernodes: at the end of one for the call,
and again at the start of another for the return.

The supergraph can be seen using @option{-fdump-analyzer-supergraph}.

We then build an @code{analysis_plan} which walks the callgraph to
determine which calls might be suitable for being summarized (rather
than fully explored) and thus in what order to explore the functions.

Next is the heart of the analyzer: we use a worklist to explore state
within the supergraph, building an "exploded graph".
Nodes in the exploded graph correspond to <point,@w{ }state> pairs, as in
     "Precise Interprocedural Dataflow Analysis via Graph Reachability"
     (Thomas Reps, Susan Horwitz and Mooly Sagiv).

We reuse nodes for <point, state> pairs we've already seen, and avoid
tracking state too closely, so that (hopefully) we rapidly converge
on a final exploded graph, and terminate the analysis.  We also bail
out if the number of exploded <end-of-basic-block, state> nodes gets
larger than a particular multiple of the total number of basic blocks
(to ensure termination in the face of pathological state-explosion
cases, or bugs).  We also stop exploring a point once we hit a limit
of states for that point.

We can identify problems directly when processing a <point,@w{ }state>
instance.  For example, if we're finding the successors of

@smallexample
   <point: before-stmt: "free (ptr);",
    state: @{"ptr": freed@}>
@end smallexample

then we can detect a double-free of "ptr".  We can then emit a path
to reach the problem by finding the simplest route through the graph.

Program points in the analysis are much more fine-grained than in the
CFG and supergraph, with points (and thus potentially exploded nodes)
for various events, including before individual statements.
By default the exploded graph merges multiple consecutive statements
in a supernode into one exploded edge to minimize the size of the
exploded graph.  This can be suppressed via
@option{-fanalyzer-fine-grained}.
The fine-grained approach seems to make things simpler and more debuggable
that other approaches I tried, in that each point is responsible for one
thing.

Program points in the analysis also have a "call string" identifying the
stack of callsites below them, so that paths in the exploded graph
correspond to interprocedurally valid paths: we always return to the
correct call site, propagating state information accordingly.
We avoid infinite recursion by stopping the analysis if a callsite
appears more than @code{analyzer-max-recursion-depth} in a callstring
(defaulting to 2).

@subsection Graphs

Nodes and edges in the exploded graph are called ``exploded nodes'' and
``exploded edges'' and often referred to in the code as
@code{enodes} and @code{eedges} (especially when distinguishing them
from the @code{snodes} and @code{sedges} in the supergraph).

Each graph numbers its nodes, giving unique identifiers - supernodes
are referred to throughout dumps in the form @samp{SN': @var{index}} and
exploded nodes in the form @samp{EN: @var{index}} (e.g. @samp{SN: 2} and
@samp{EN:29}).

The supergraph can be seen using @option{-fdump-analyzer-supergraph-graph}.

The exploded graph can be seen using @option{-fdump-analyzer-exploded-graph}
and other dump options.  Exploded nodes are color-coded in the .dot output
based on state-machine states to make it easier to see state changes at
a glance.

@subsection State Tracking

There's a tension between:
@itemize @bullet
@item
precision of analysis in the straight-line case, vs
@item
exponential blow-up in the face of control flow.
@end itemize

For example, in general, given this CFG:

@smallexample
      A
     / \
    B   C
     \ /
      D
     / \
    E   F
     \ /
      G
@end smallexample

we want to avoid differences in state-tracking in B and C from
leading to blow-up.  If we don't prevent state blowup, we end up
with exponential growth of the exploded graph like this:

@smallexample

           1:A
          /   \
         /     \
        /       \
      2:B       3:C
       |         |
      4:D       5:D        (2 exploded nodes for D)
     /   \     /   \
   6:E   7:F 8:E   9:F
    |     |   |     |
   10:G 11:G 12:G  13:G    (4 exploded nodes for G)

@end smallexample

Similar issues arise with loops.

To prevent this, we follow various approaches:

@enumerate a
@item
state pruning: which tries to discard state that won't be relevant
later on withing the function.
This can be disabled via @option{-fno-analyzer-state-purge}.

@item
state merging.  We can try to find the commonality between two
program_state instances to make a third, simpler program_state.
We have two strategies here:

  @enumerate
  @item
     the worklist keeps new nodes for the same program_point together,
     and tries to merge them before processing, and thus before they have
     successors.  Hence, in the above, the two nodes for D (4 and 5) reach
     the front of the worklist together, and we create a node for D with
     the merger of the incoming states.

  @item
     try merging with the state of existing enodes for the program_point
     (which may have already been explored).  There will be duplication,
     but only one set of duplication; subsequent duplicates are more likely
     to hit the cache.  In particular, (hopefully) all merger chains are
     finite, and so we guarantee termination.
     This is intended to help with loops: we ought to explore the first
     iteration, and then have a "subsequent iterations" exploration,
     which uses a state merged from that of the first, to be more abstract.
  @end enumerate

We avoid merging pairs of states that have state-machine differences,
as these are the kinds of differences that are likely to be most
interesting.  So, for example, given:

@smallexample
      if (condition)
        ptr = malloc (size);
      else
        ptr = local_buf;

      .... do things with 'ptr'

      if (condition)
        free (ptr);

      ...etc
@end smallexample

then we end up with an exploded graph that looks like this:

@smallexample

                   if (condition)
                     / T      \ F
            ---------          ----------
           /                             \
      ptr = malloc (size)             ptr = local_buf
          |                               |
      copy of                         copy of
        "do things with 'ptr'"          "do things with 'ptr'"
      with ptr: heap-allocated        with ptr: stack-allocated
          |                               |
      if (condition)                  if (condition)
          | known to be T                 | known to be F
      free (ptr);                         |
           \                             /
            -----------------------------
                         | ('ptr' is pruned, so states can be merged)
                        etc

@end smallexample

where some duplication has occurred, but only for the places where the
the different paths are worth exploringly separately.

Merging can be disabled via @option{-fno-analyzer-state-merge}.
@end enumerate

@subsection Region Model

Part of the state stored at a @code{exploded_node} is a @code{region_model}.
This is an implementation of the region-based ternary model described in
@url{https://www.researchgate.net/publication/221430855_A_Memory_Model_for_Static_Analysis_of_C_Programs,
"A Memory Model for Static Analysis of C Programs"}
(Zhongxing Xu, Ted Kremenek, and Jian Zhang).

A @code{region_model} encapsulates a representation of the state of
memory, with a @code{store} recording a binding between @code{region}
instances, to @code{svalue} instances.  The bindings are organized into
clusters, where regions accessible via well-defined pointer arithmetic
are in the same cluster.  The representation is graph-like because values
can be pointers to regions.  It also stores a constraint_manager,
capturing relationships between the values.

Because each node in the @code{exploded_graph} has a @code{region_model},
and each of the latter is graph-like, the @code{exploded_graph} is in some
ways a graph of graphs.

Here's an example of printing a @code{program_state}, showing the
@code{region_model} within it, along with state for the @code{malloc}
state machine.

@smallexample
(gdb) call debug (*this)
rmodel:
stack depth: 1
  frame (index 0): frame: ‘test’@@1
clusters within frame: ‘test’@@1
  cluster for: ptr_3: &HEAP_ALLOCATED_REGION(12)
m_called_unknown_fn: FALSE
constraint_manager:
  equiv classes:
  constraints:
malloc:
  0x2e89590: &HEAP_ALLOCATED_REGION(12): unchecked ('ptr_3')
@end smallexample

This is the state at the point of returning from @code{calls_malloc} back
to @code{test} in the following:

@smallexample
void *
calls_malloc (void)
@{
  void *result = malloc (1024);
  return result;
@}

void test (void)
@{
  void *ptr = calls_malloc ();
  /* etc.  */
@}
@end smallexample

Within the store, there is the cluster for @code{ptr_3} within the frame
for @code{test}, where the whole cluster is bound to a pointer value,
pointing at @code{HEAP_ALLOCATED_REGION(12)}.  Additionally, this pointer
has the @code{unchecked} state for the @code{malloc} state machine
indicating it hasn't yet been checked against NULL since the allocation
call.

@subsection Analyzer Paths

We need to explain to the user what the problem is, and to persuade them
that there really is a problem.  Hence having a @code{diagnostic_path}
isn't just an incidental detail of the analyzer; it's required.

Paths ought to be:
@itemize @bullet
@item
interprocedurally-valid
@item
feasible
@end itemize

Without state-merging, all paths in the exploded graph are feasible
(in terms of constraints being satisfied).
With state-merging, paths in the exploded graph can be infeasible.

We collate warnings and only emit them for the simplest path
e.g. for a bug in a utility function, with lots of routes to calling it,
we only emit the simplest path (which could be intraprocedural, if
it can be reproduced without a caller).

We thus want to find the shortest feasible path through the exploded
graph from the origin to the exploded node at which the diagnostic was
saved.  Unfortunately, if we simply find the shortest such path and
check if it's feasible we might falsely reject the diagnostic, as there
might be a longer path that is feasible.  Examples include the cases
where the diagnostic requires us to go at least once around a loop for a
later condition to be satisfied, or where for a later condition to be
satisfied we need to enter a suite of code that the simpler path skips.

We attempt to find the shortest feasible path to each diagnostic by
first constructing a ``trimmed graph'' from the exploded graph,
containing only those nodes and edges from which there are paths to
the target node, and using Dijkstra's algorithm to order the trimmed
nodes by minimal distance to the target.

We then use a worklist to iteratively build a ``feasible graph''
(actually a tree), capturing the pertinent state along each path, in
which every path to a ``feasible node'' is feasible by construction,
restricting ourselves to the trimmed graph to ensure we stay on target,
and ordering the worklist so that the first feasible path we find to the
target node is the shortest possible path.  Hence we start by trying the
shortest possible path, but if that fails, we explore progressively
longer paths, eventually trying iterations through loops.  The
exploration is captured in the feasible_graph, which can be dumped as a
.dot file via @option{-fdump-analyzer-feasibility} to visualize the
exploration.  The indices of the feasible nodes show the order in which
they were created.  We effectively explore the tree of feasible paths in
order of shortest path until we either find a feasible path to the
target node, or hit a limit and give up.

This is something of a brute-force approach, but the trimmed graph
hopefully keeps the complexity manageable.

This algorithm can be disabled (for debugging purposes) via
@option{-fno-analyzer-feasibility}, which simply uses the shortest path,
and notes if it is infeasible.

The above gives us a shortest feasible @code{exploded_path} through the
@code{exploded_graph} (a list of @code{exploded_edge *}).  We use this
@code{exploded_path} to build a @code{diagnostic_path} (a list of
@strong{events} for the diagnostic subsystem) - specifically a
@code{checker_path}.

Having built the @code{checker_path}, we prune it to try to eliminate
events that aren't relevant, to minimize how much the user has to read.

After pruning, we notify each event in the path of its ID and record the
IDs of interesting events, allowing for events to refer to other events
in their descriptions.  The @code{pending_diagnostic} class has various
vfuncs to support emitting more precise descriptions, so that e.g.

@itemize @bullet
@item
a deref-of-unchecked-malloc diagnostic might use:
@smallexample
  returning possibly-NULL pointer to 'make_obj' from 'allocator'
@end smallexample
for a @code{return_event} to make it clearer how the unchecked value moves
from callee back to caller
@item
a double-free diagnostic might use:
@smallexample
  second 'free' here; first 'free' was at (3)
@end smallexample
and a use-after-free might use
@smallexample
  use after 'free' here; memory was freed at (2)
@end smallexample
@end itemize

At this point we can emit the diagnostic.

@subsection Limitations

@itemize @bullet
@item
Only for C so far
@item
The implementation of call summaries is currently very simplistic.
@item
Lack of function pointer analysis
@item
The constraint-handling code assumes reflexivity in some places
(that values are equal to themselves), which is not the case for NaN.
As a simple workaround, constraints on floating-point values are
currently ignored.
@item
There are various other limitations in the region model (grep for TODO/xfail
in the testsuite).
@item
The constraint_manager's implementation of transitivity is currently too
expensive to enable by default and so must be manually enabled via
@option{-fanalyzer-transitivity}).
@item
The checkers are currently hardcoded and don't allow for user extensibility
(e.g. adding allocate/release pairs).
@item
Although the analyzer's test suite has a proof-of-concept test case for
LTO, LTO support hasn't had extensive testing.  There are various
lang-specific things in the analyzer that assume C rather than LTO.
For example, SSA names are printed to the user in ``raw'' form, rather
than printing the underlying variable name.
@end itemize

Some ideas for other checkers
@itemize @bullet
@item
File-descriptor-based APIs
@item
Linux kernel internal APIs
@item
Signal handling
@end itemize

@node Debugging the Analyzer
@section Debugging the Analyzer
@cindex analyzer, debugging
@cindex static analyzer, debugging

@subsection Special Functions for Debugging the Analyzer

The analyzer recognizes various special functions by name, for use
in debugging the analyzer.  Declarations can be seen in the testsuite
in @file{analyzer-decls.h}.  None of these functions are actually
implemented.

Add:
@smallexample
  __analyzer_break ();
@end smallexample
to the source being analyzed to trigger a breakpoint in the analyzer when
that source is reached.  By putting a series of these in the source, it's
much easier to effectively step through the program state as it's analyzed.

The analyzer handles:

@smallexample
__analyzer_describe (0, expr);
@end smallexample

by emitting a warning describing the 2nd argument (which can be of any
type), at a verbosity level given by the 1st argument.  This is for use when
debugging, and may be of use in DejaGnu tests.

@smallexample
__analyzer_dump ();
@end smallexample

will dump the copious information about the analyzer's state each time it
reaches the call in its traversal of the source.

@smallexample
extern void __analyzer_dump_capacity (const void *ptr);
@end smallexample

will emit a warning describing the capacity of the base region of
the region pointed to by the 1st argument.

@smallexample
extern void __analyzer_dump_escaped (void);
@end smallexample

will emit a warning giving the number of decls that have escaped on this
analysis path, followed by a comma-separated list of their names,
in alphabetical order.

@smallexample
__analyzer_dump_path ();
@end smallexample

will emit a placeholder ``note'' diagnostic with a path to that call site,
if the analyzer finds a feasible path to it.

The builtin @code{__analyzer_dump_exploded_nodes} will emit a warning
after analysis containing information on all of the exploded nodes at that
program point:

@smallexample
  __analyzer_dump_exploded_nodes (0);
@end smallexample

will output the number of ``processed'' nodes, and the IDs of
both ``processed'' and ``merger'' nodes, such as:

@smallexample
warning: 2 processed enodes: [EN: 56, EN: 58] merger(s): [EN: 54-55, EN: 57, EN: 59]
@end smallexample

With a non-zero argument

@smallexample
  __analyzer_dump_exploded_nodes (1);
@end smallexample

it will also dump all of the states within the ``processed'' nodes.

The builtin @code{__analyzer_dump_named_constant} will emit a warning
during analysis describing what is known about the value of a given
named constant, for parts of the analyzer that interact with target
headers.

For example:

@smallexample
__analyzer_dump_named_constant ("O_RDONLY");
@end smallexample

might emit the warning:

@smallexample
warning: named constant 'O_RDONLY' has value '1'
@end smallexample

@smallexample
   __analyzer_dump_region_model ();
@end smallexample
will dump the region_model's state to stderr.

@smallexample
__analyzer_dump_state ("malloc", ptr);
@end smallexample

will emit a warning describing the state of the 2nd argument
(which can be of any type) with respect to the state machine with
a name matching the 1st argument (which must be a string literal).
This is for use when debugging, and may be of use in DejaGnu tests.

@smallexample
__analyzer_eval (expr);
@end smallexample
will emit a warning with text "TRUE", FALSE" or "UNKNOWN" based on the
truthfulness of the argument.  This is useful for writing DejaGnu tests.

@smallexample
__analyzer_get_unknown_ptr ();
@end smallexample
will obtain an unknown @code{void *}.

@subsection Other Debugging Techniques

The option @option{-fdump-analyzer-json} will dump both the supergraph
and the exploded graph in compressed JSON form.

One approach when tracking down where a particular bogus state is
introduced into the @code{exploded_graph} is to add custom code to
@code{program_state::validate}.

The debug function @code{region::is_named_decl_p} can be used when debugging,
such as for assertions and conditional breakpoints.  For example, when
tracking down a bug in handling a decl called @code{yy_buffer_stack}, I
temporarily added a:
@smallexample
  gcc_assert (!m_base_region->is_named_decl_p ("yy_buffer_stack"));
@end smallexample
to @code{binding_cluster::mark_as_escaped} to trap a point where
@code{yy_buffer_stack} was mistakenly being treated as having escaped.