;; ARM ldrd/strd peephole optimizations. ;; ;; Copyright (C) 2013-2020 Free Software Foundation, Inc. ;; ;; Written by Greta Yorsh greta.yorsh@arm.com
;; This file is part of GCC. ;; ;; GCC is free software; you can redistribute it and/or modify it ;; under the terms of the GNU General Public License as published by ;; the Free Software Foundation; either version 3, or (at your option) ;; any later version. ;; ;; GCC is distributed in the hope that it will be useful, but ;; WITHOUT ANY WARRANTY; without even the implied warranty of ;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ;; General Public License for more details. ;; ;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; http://www.gnu.org/licenses/.
;; The following peephole optimizations identify consecutive memory ;; accesses, and try to rearrange the operands to enable generation of ;; ldrd/strd. ;; ;; In many cases they behave in the same way that patterns in ldmstm.md behave, ;; but there is extra logic in gen_operands_ldrd_strd to try and ensure the ;; registers used are an (r, r<N + 1>) pair where N is even.
(define_peephole2 ; ldrd [(set (match_operand:SI 0 “arm_general_register_operand” "") (match_operand:SI 2 “memory_operand” "")) (set (match_operand:SI 1 “arm_general_register_operand” "") (match_operand:SI 3 “memory_operand” ""))] “TARGET_LDRD” [(parallel [(set (match_dup 0) (match_dup 2)) (set (match_dup 1) (match_dup 3))])] { if (!gen_operands_ldrd_strd (operands, true, false, false)) FAIL; })
(define_peephole2 ; strd [(set (match_operand:SI 2 “memory_operand” "") (match_operand:SI 0 “arm_general_register_operand” "")) (set (match_operand:SI 3 “memory_operand” "") (match_operand:SI 1 “arm_general_register_operand” ""))] “TARGET_LDRD” [(parallel [(set (match_dup 2) (match_dup 0)) (set (match_dup 3) (match_dup 1))])] { if (!gen_operands_ldrd_strd (operands, false, false, false)) FAIL; })
;; The following peepholes reorder registers to enable LDRD/STRD. (define_peephole2 ; strd of constants [(set (match_operand:SI 0 “arm_general_register_operand” "") (match_operand:SI 4 “const_int_operand” "")) (set (match_operand:SI 2 “memory_operand” "") (match_dup 0)) (set (match_operand:SI 1 “arm_general_register_operand” "") (match_operand:SI 5 “const_int_operand” "")) (set (match_operand:SI 3 “memory_operand” "") (match_dup 1))] “TARGET_LDRD” [(set (match_dup 0) (match_dup 4)) (set (match_dup 1) (match_dup 5)) (parallel [(set (match_dup 2) (match_dup 0)) (set (match_dup 3) (match_dup 1))])] { if (!gen_operands_ldrd_strd (operands, false, true, false)) FAIL; })
(define_peephole2 ; strd of constants [(set (match_operand:SI 0 “arm_general_register_operand” "") (match_operand:SI 4 “const_int_operand” "")) (set (match_operand:SI 1 “arm_general_register_operand” "") (match_operand:SI 5 “const_int_operand” "")) (set (match_operand:SI 2 “memory_operand” "") (match_dup 0)) (set (match_operand:SI 3 “memory_operand” "") (match_dup 1))] “TARGET_LDRD” [(set (match_dup 0) (match_dup 4)) (set (match_dup 1) (match_dup 5)) (parallel [(set (match_dup 2) (match_dup 0)) (set (match_dup 3) (match_dup 1))])] { if (!gen_operands_ldrd_strd (operands, false, true, false)) FAIL; })
;; The following two peephole optimizations are only relevant for ARM ;; mode where LDRD/STRD require consecutive registers.
(define_peephole2 ; swap the destination registers of two loads ; before a commutative operation. [(set (match_operand:SI 0 “arm_general_register_operand” "") (match_operand:SI 2 “memory_operand” "")) (set (match_operand:SI 1 “arm_general_register_operand” "") (match_operand:SI 3 “memory_operand” "")) (set (match_operand:SI 4 “arm_general_register_operand” "") (match_operator:SI 5 “commutative_binary_operator” [(match_operand 6 “arm_general_register_operand” "") (match_operand 7 “arm_general_register_operand” "") ]))] “TARGET_LDRD && TARGET_ARM && ( ((rtx_equal_p(operands[0], operands[6])) && (rtx_equal_p(operands[1], operands[7]))) ||((rtx_equal_p(operands[0], operands[7])) && (rtx_equal_p(operands[1], operands[6])))) && (peep2_reg_dead_p (3, operands[0]) || rtx_equal_p (operands[0], operands[4])) && (peep2_reg_dead_p (3, operands[1]) || rtx_equal_p (operands[1], operands[4]))” [(parallel [(set (match_dup 0) (match_dup 2)) (set (match_dup 1) (match_dup 3))]) (set (match_dup 4) (match_op_dup 5 [(match_dup 6) (match_dup 7)]))] { if (!gen_operands_ldrd_strd (operands, true, false, true)) FAIL; })
(define_peephole2 ; swap the destination registers of two loads ; before a commutative operation that sets the flags. [(set (match_operand:SI 0 “arm_general_register_operand” "") (match_operand:SI 2 “memory_operand” "")) (set (match_operand:SI 1 “arm_general_register_operand” "") (match_operand:SI 3 “memory_operand” "")) (parallel [(set (match_operand:SI 4 “arm_general_register_operand” "") (match_operator:SI 5 “commutative_binary_operator” [(match_operand 6 “arm_general_register_operand” "") (match_operand 7 “arm_general_register_operand” "") ])) (clobber (reg:CC CC_REGNUM))])] “TARGET_LDRD && TARGET_ARM && ( ((rtx_equal_p(operands[0], operands[6])) && (rtx_equal_p(operands[1], operands[7]))) ||((rtx_equal_p(operands[0], operands[7])) && (rtx_equal_p(operands[1], operands[6])))) && (peep2_reg_dead_p (3, operands[0]) || rtx_equal_p (operands[0], operands[4])) && (peep2_reg_dead_p (3, operands[1]) || rtx_equal_p (operands[1], operands[4]))” [(parallel [(set (match_dup 0) (match_dup 2)) (set (match_dup 1) (match_dup 3))]) (parallel [(set (match_dup 4) (match_op_dup 5 [(match_dup 6) (match_dup 7)])) (clobber (reg:CC CC_REGNUM))])] { if (!gen_operands_ldrd_strd (operands, true, false, true)) FAIL; })
;; TODO: Handle LDRD/STRD with writeback: ;; (a) memory operands can be POST_INC, POST_DEC, PRE_MODIFY, POST_MODIFY ;; (b) Patterns may be followed by an update of the base address.
;; insns matching the LDRD/STRD patterns that will get created by the above ;; peepholes. ;; We use gen_operands_ldrd_strd() with a modify argument as false so that the ;; operands are not changed. (define_insn “*arm_ldrd” [(parallel [(set (match_operand:SI 0 “s_register_operand” “=r”) (match_operand:SI 2 “memory_operand” “m”)) (set (match_operand:SI 1 “s_register_operand” “=rk”) (match_operand:SI 3 “memory_operand” “m”))])] “TARGET_LDRD && TARGET_ARM && reload_completed && valid_operands_ldrd_strd (operands, true)” { rtx op[2]; op[0] = gen_rtx_REG (DImode, REGNO (operands[0])); op[1] = adjust_address (operands[2], DImode, 0); return output_move_double (op, true, NULL); } [(set (attr “length”) (symbol_ref “arm_count_ldrdstrd_insns (operands, true) * 4”)) (set (attr “ce_count”) (symbol_ref “get_attr_length (insn) / 4”)) (set_attr “type” “load_8”) (set_attr “predicable” “yes”)] )
(define_insn “*arm_strd” [(parallel [(set (match_operand:SI 2 “memory_operand” “=m”) (match_operand:SI 0 “s_register_operand” “r”)) (set (match_operand:SI 3 “memory_operand” “=m”) (match_operand:SI 1 “s_register_operand” “rk”))])] “TARGET_LDRD && TARGET_ARM && reload_completed && valid_operands_ldrd_strd (operands, false)” { rtx op[2]; op[0] = adjust_address (operands[2], DImode, 0); op[1] = gen_rtx_REG (DImode, REGNO (operands[0])); return output_move_double (op, true, NULL); } [(set (attr “length”) (symbol_ref “arm_count_ldrdstrd_insns (operands, false) * 4”)) (set (attr “ce_count”) (symbol_ref “get_attr_length (insn) / 4”)) (set_attr “type” “store_8”) (set_attr “predicable” “yes”)] )