;; Machine Descriptions for R8C/M16C/M32C ;; Copyright (C) 2005-2021 Free Software Foundation, Inc. ;; Contributed by Red Hat. ;; ;; This file is part of GCC. ;; ;; GCC is free software; you can redistribute it and/or modify it ;; under the terms of the GNU General Public License as published ;; by the Free Software Foundation; either version 3, or (at your ;; option) any later version. ;; ;; GCC is distributed in the hope that it will be useful, but WITHOUT ;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ;; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public ;; License for more details. ;; ;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; http://www.gnu.org/licenses/.
;; Bit-wise operations (and, ior, xor, shift)
; On the R8C and M16C, “address” for bit instructions is usually (but ; not always!) the bit address, not the byte address. This ; confuses gcc, so we avoid cases where gcc would produce the wrong ; code. We're left with absolute addresses and registers, and the odd ; case of shifting a bit by a variable.
; On the M32C, “address” for bit instructions is a regular address, ; and the bit number is stored in a separate field. Thus, we can let ; gcc do more interesting things. However, the M32C cannot set all ; the bits in a 16-bit register, which the R8C/M16C can do.
; However, it all means that we end up with two sets of patterns, one ; for each chip.
;;----------------------------------------------------------------------
;; First off, all the ways we can set one bit, other than plain IOR.
(define_insn “bset_qi” [(set (match_operand:QI 0 “memsym_operand” “+Si”) (ior:QI (subreg:QI (ashift:HI (const_int 1) (subreg:QI (match_operand:HI 1 “a_qi_operand” “Raa”) 0)) 0) (match_dup 0)))] “TARGET_A16” “bset\t%0[%1]” [(set_attr “flags” “n”)] )
(define_insn “bset_hi” [(set (zero_extract:HI (match_operand:QI 0 “memsym_operand” “+Si”) (const_int 1) (zero_extend:HI (subreg:QI (match_operand:HI 1 “a_qi_operand” “Raa”) 0))) (const_int 1))] “TARGET_A16” “bset\t%0[%1]” [(set_attr “flags” “n”)] )
;;----------------------------------------------------------------------
;; Now all the ways we can clear one bit, other than plain AND.
; This is odd because the shift patterns use QI counts, but we can't ; easily put QI in $aN without causing problems elsewhere. (define_insn “bclr_qi” [(set (zero_extract:HI (match_operand:QI 0 “memsym_operand” “+Si”) (const_int 1) (zero_extend:HI (subreg:QI (match_operand:HI 1 “a_qi_operand” “Raa”) 0))) (const_int 0))] “TARGET_A16” “bclr\t%0[%1]” [(set_attr “flags” “n”)] )
;;----------------------------------------------------------------------
;; Now the generic patterns.
(define_insn “andqi3_16” [(set (match_operand:QI 0 “mra_operand” “=Sp,Rqi,RhlSd,RhlSd,??Rmm,??Rmm”) (and:QI (match_operand:QI 1 “mra_operand” “%0,0,0,0,0,0”) (match_operand:QI 2 “mrai_operand” “Imb,Imb,iRhlSd,?Rmm,iRhlSd,?Rmm”)))] “TARGET_A16” “@ bclr\t%B2,%0 bclr\t%B2,%h0 and.b\t%x2,%0 and.b\t%x2,%0 and.b\t%x2,%0 and.b\t%x2,%0” [(set_attr “flags” “n,n,sz,sz,sz,sz”)] )
(define_insn “andhi3_16” [(set (match_operand:HI 0 “mra_operand” “=Sp,Sp,Rhi,RhiSd,??Rmm,RhiSd,??Rmm”) (and:HI (match_operand:HI 1 “mra_operand” “%0,0,0,0,0,0,0”) (match_operand:HI 2 “mrai_operand” “ImB,Imw,Imw,iRhiSd,?Rmm,?Rmm,iRhiSd”)))] “TARGET_A16” "@
bclr\t%B2,%0 bclr\t%B2-8,1+%0 bclr\t%B2,%0 and.w\t%X2,%0 and.w\t%X2,%0 and.w\t%X2,%0 and.w\t%X2,%0" [(set_attr “flags” “n,n,n,sz,sz,sz,sz”)] )
(define_insn “andsi3” [(set (match_operand:SI 0 “mra_operand” “=RsiSd,RsiSd,??Rmm,??Rmm,??Rmm,RsiSd”) (and:SI (match_operand:SI 1 “mra_operand” “%0,0,0,0,0,0”) (match_operand:SI 2 “mrai_operand” “i,?Rmm,i,RsiSd,?Rmm,RsiSd”)))] "" “* switch (which_alternative) { case 0: output_asm_insn ("and.w %X2,%h0",operands); operands[2]= GEN_INT (INTVAL (operands[2]) >> 16); return "and.w %X2,%H0"; case 1: return "and.w %h2,%h0;and.w %H2,%H0"; case 2: output_asm_insn ("and.w %X2,%h0",operands); operands[2]= GEN_INT (INTVAL (operands[2]) >> 16); return "and.w %X2,%H0"; case 3: return "and.w %h2,%h0;and.w %H2,%H0"; case 4: return "and.w %h2,%h0;and.w %H2,%H0"; case 5: return "and.w %h2,%h0;and.w %H2,%H0"; default: gcc_unreachable (); }” [(set_attr “flags” “x,x,x,x,x,x”)] )
(define_insn “iorqi3_16” [(set (match_operand:QI 0 “mra_operand” “=Sp,Rqi,RqiSd,??Rmm,RqiSd,??Rmm”) (ior:QI (match_operand:QI 1 “mra_operand” “%0,0,0,0,0,0”) (match_operand:QI 2 “mrai_operand” “Ilb,Ilb,iRhlSd,iRhlSd,?Rmm,?Rmm”)))] “TARGET_A16” “@ bset\t%B2,%0 bset\t%B2,%h0 or.b\t%x2,%0 or.b\t%x2,%0 or.b\t%x2,%0 or.b\t%x2,%0” [(set_attr “flags” “n,n,sz,sz,sz,sz”)] )
(define_insn “iorhi3_16” [(set (match_operand:HI 0 “mra_operand” “=Sp,Sp,Rhi,RhiSd,RhiSd,??Rmm,??Rmm”) (ior:HI (match_operand:HI 1 “mra_operand” “%0,0,0,0,0,0,0”) (match_operand:HI 2 “mrai_operand” “Ilb,Ilw,Ilw,iRhiSd,?Rmm,iRhiSd,?Rmm”)))] “TARGET_A16” “@ bset %B2,%0 bset\t%B2-8,1+%0 bset\t%B2,%0 or.w\t%X2,%0 or.w\t%X2,%0 or.w\t%X2,%0 or.w\t%X2,%0” [(set_attr “flags” “n,n,n,sz,sz,sz,sz”)] )
; - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
(define_insn “andqi3_24” [(set (match_operand:QI 0 “mra_operand” “=Sd,Rqi,RhlSd,RhlSd,??Rmm,??Rmm”) (and:QI (match_operand:QI 1 “mra_operand” “%0,0,0,0,0,0”) (match_operand:QI 2 “mrai_operand” “Imb,Imb,iRhlSd,?Rmm,iRhlSd,?Rmm”)))] “TARGET_A24” “@ bclr\t%B2,%0 bclr\t%B2,%0 and.b\t%x2,%0 and.b\t%x2,%0 and.b\t%x2,%0 and.b\t%x2,%0” [(set_attr “flags” “n,n,sz,sz,sz,sz”)] )
(define_insn “andhi3_24” [(set (match_operand:HI 0 “mra_operand” “=Sd,Sd,?Rhl,?Rhl,RhiSd,??Rmm,RhiSd,??Rmm”) (and:HI (match_operand:HI 1 “mra_operand” “%0,0,0,0,0,0,0,0”) (match_operand:HI 2 “mrai_operand” “ImB,Imw,ImB,Imw,iRhiSd,?Rmm,?Rmm,iRhiSd”)))] “TARGET_A24” “@ bclr\t%B2,%0 bclr\t%B2-8,1+%0 bclr\t%B2,%h0 bclr\t%B2-8,%H0 and.w\t%X2,%0 and.w\t%X2,%0 and.w\t%X2,%0 and.w\t%X2,%0” [(set_attr “flags” “n,n,n,n,sz,sz,sz,sz”)] )
(define_insn “iorqi3_24” [(set (match_operand:QI 0 “mra_operand” “=RqiSd,RqiSd,??Rmm,RqiSd,??Rmm”) (ior:QI (match_operand:QI 1 “mra_operand” “%0,0,0,0,0”) (match_operand:QI 2 “mrai_operand” “Ilb,iRhlSd,iRhlSd,?Rmm,?Rmm”)))] “TARGET_A24” “@ bset\t%B2,%0 or.b\t%x2,%0 or.b\t%x2,%0 or.b\t%x2,%0 or.b\t%x2,%0” [(set_attr “flags” “n,sz,sz,sz,sz”)] )
(define_insn “iorhi3_24” [(set (match_operand:HI 0 “mra_operand” “=Sd,Sd,?Rhl,?Rhl,RhiSd,RhiSd,??Rmm,??Rmm”) (ior:HI (match_operand:HI 1 “mra_operand” “%0,0,0,0,0,0,0,0”) (match_operand:HI 2 “mrai_operand” “Ilb,Ilw,Ilb,Ilw,iRhiSd,?Rmm,iRhiSd,?Rmm”)))] “TARGET_A24” “@ bset\t%B2,%0 bset\t%B2-8,1+%0 bset\t%B2,%h0 bset\t%B2-8,%H0 or.w\t%X2,%0 or.w\t%X2,%0 or.w\t%X2,%0 or.w\t%X2,%0” [(set_attr “flags” “n,n,n,n,sz,sz,sz,sz”)] )
; ----------------------------------------------------------------------
(define_expand “andqi3” [(set (match_operand:QI 0 “mra_operand” "") (and:QI (match_operand:QI 1 “mra_operand” "") (match_operand:QI 2 “mrai_operand” "")))] "" “if (TARGET_A16) emit_insn (gen_andqi3_16 (operands[0], operands[1], operands[2])); else emit_insn (gen_andqi3_24 (operands[0], operands[1], operands[2])); DONE;” )
(define_expand “andhi3” [(set (match_operand:HI 0 “mra_operand” "") (and:HI (match_operand:HI 1 “mra_operand” "") (match_operand:HI 2 “mrai_operand” "")))] "" “if (TARGET_A16) emit_insn (gen_andhi3_16 (operands[0], operands[1], operands[2])); else emit_insn (gen_andhi3_24 (operands[0], operands[1], operands[2])); DONE;” )
(define_expand “iorqi3” [(set (match_operand:QI 0 “mra_operand” "") (ior:QI (match_operand:QI 1 “mra_operand” "") (match_operand:QI 2 “mrai_operand” "")))] "" “if (TARGET_A16) emit_insn (gen_iorqi3_16 (operands[0], operands[1], operands[2])); else emit_insn (gen_iorqi3_24 (operands[0], operands[1], operands[2])); DONE;” )
(define_expand “iorhi3” [(set (match_operand:HI 0 “mra_operand” "") (ior:HI (match_operand:HI 1 “mra_operand” "") (match_operand:HI 2 “mrai_operand” "")))] "" “if (TARGET_A16) emit_insn (gen_iorhi3_16 (operands[0], operands[1], operands[2])); else emit_insn (gen_iorhi3_24 (operands[0], operands[1], operands[2])); DONE;” )
(define_insn “iorsi3” [(set (match_operand:SI 0 “mra_operand” “=RsiSd,RsiSd,??Rmm,??Rmm,??Rmm,RsiSd”) (ior:SI (match_operand:SI 1 “mra_operand” “%0,0,0,0,0,0”) (match_operand:SI 2 “mrai_operand” “i,?Rmm,i,RsiSd,?Rmm,RsiSd”)))] "" “* switch (which_alternative) { case 0: output_asm_insn ("or.w %X2,%h0",operands); operands[2]= GEN_INT (INTVAL (operands[2]) >> 16); return "or.w %X2,%H0"; case 1: return "or.w %h2,%h0;or.w %H2,%H0"; case 2: output_asm_insn ("or.w %X2,%h0",operands); operands[2]= GEN_INT (INTVAL (operands[2]) >> 16); return "or.w %X2,%H0"; case 3: return "or.w %h2,%h0;or.w %H2,%H0"; case 4: return "or.w %h2,%h0;or.w %H2,%H0"; case 5: return "or.w %h2,%h0;or.w %H2,%H0"; default: gcc_unreachable (); }” [(set_attr “flags” “x,x,x,x,x,x”)] )
(define_insn “xorqi3” [(set (match_operand:QI 0 “mra_operand” “=RhlSd,RhlSd,??Rmm,??Rmm”) (xor:QI (match_operand:QI 1 “mra_operand” “%0,0,0,0”) (match_operand:QI 2 “mrai_operand” “iRhlSd,?Rmm,iRhlSd,?Rmm”)))] "" “xor.b\t%x2,%0” [(set_attr “flags” “sz,sz,sz,sz”)] )
(define_insn “xorhi3” [(set (match_operand:HI 0 “mra_operand” “=RhiSd,RhiSd,??Rmm,??Rmm”) (xor:HI (match_operand:HI 1 “mra_operand” “%0,0,0,0”) (match_operand:HI 2 “mrai_operand” “iRhiSd,?Rmm,iRhiSd,?Rmm”)))] "" “xor.w\t%X2,%0” [(set_attr “flags” “sz,sz,sz,sz”)] )
(define_insn “xorsi3” [(set (match_operand:SI 0 “mra_operand” “=RsiSd,RsiSd,??Rmm,??Rmm,??Rmm,RsiSd”) (xor:SI (match_operand:SI 1 “mra_operand” “%0,0,0,0,0,0”) (match_operand:SI 2 “mrai_operand” “i,?Rmm,i,RsiSd,?Rmm,RsiSd”)))] "" “* switch (which_alternative) { case 0: output_asm_insn ("xor.w %X2,%h0",operands); operands[2]= GEN_INT (INTVAL (operands[2]) >> 16); return "xor.w %X2,%H0"; case 1: return "xor.w %h2,%h0;xor.w %H2,%H0"; case 2: output_asm_insn ("xor.w %X2,%h0",operands); operands[2]= GEN_INT (INTVAL (operands[2]) >> 16); return "xor.w %X2,%H0"; case 3: return "xor.w %h2,%h0;xor.w %H2,%H0"; case 4: return "xor.w %h2,%h0;xor.w %H2,%H0"; case 5: return "xor.w %h2,%h0;xor.w %H2,%H0"; default: gcc_unreachable (); }” [(set_attr “flags” “x,x,x,x,x,x”)] )
(define_insn “one_cmplqi2” [(set (match_operand:QI 0 “mra_operand” “=RhlSd,??Rmm”) (not:QI (match_operand:QI 1 “mra_operand” “0,0”)))] "" “not.b\t%0” [(set_attr “flags” “sz,sz”)] )
(define_insn “one_cmplhi2” [(set (match_operand:HI 0 “mra_operand” “=RhiSd,??Rmm”) (not:HI (match_operand:HI 1 “mra_operand” “0,0”)))] "" “not.w\t%0” [(set_attr “flags” “sz,sz”)] )
; Optimizations using bit opcodes
; We need this because combine only looks at three insns at a time, ; and the bclr_qi pattern uses four - mov, shift, not, and. GCC ; should never expand this pattern, because it only shifts a constant ; by a constant, so gcc should do that itself. (define_insn “shift1_qi” [(set (match_operand:QI 0 “mra_operand” “=Rqi”) (ashift:QI (const_int 1) (match_operand 1 “const_int_operand” “In4”)))] "" “mov.b\t#1,%0\n\tshl.b\t%1,%0” ) (define_insn “shift1_hi” [(set (match_operand:HI 0 “mra_operand” “=Rhi”) (ashift:HI (const_int 1) (match_operand 1 “const_int_operand” “In4”)))] "" “mov.w\t#1,%0\n\tshl.w\t%1,%0” )
; Generic insert-bit expander, needed so that we can use the bit ; opcodes for volatile bitfields.
(define_expand “insv” [(set (zero_extract:HI (match_operand:HI 0 “mra_operand” "") (match_operand 1 “const_int_operand” "") (match_operand 2 “const_int_operand” "")) (match_operand:HI 3 “const_int_operand” ""))] "" “if (m32c_expand_insv (operands)) FAIL; DONE;” )