;; Machine Descriptions for R8C/M16C/M32C ;; Copyright (C) 2005-2021 Free Software Foundation, Inc. ;; Contributed by Red Hat. ;; ;; This file is part of GCC. ;; ;; GCC is free software; you can redistribute it and/or modify it ;; under the terms of the GNU General Public License as published ;; by the Free Software Foundation; either version 3, or (at your ;; option) any later version. ;; ;; GCC is distributed in the hope that it will be useful, but WITHOUT ;; ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ;; or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public ;; License for more details. ;; ;; You should have received a copy of the GNU General Public License ;; along with GCC; see the file COPYING3. If not see ;; http://www.gnu.org/licenses/.
;; Predicates
; TRUE for any valid operand. We do this because general_operand ; refuses to match volatile memory refs.
(define_predicate “m32c_any_operand” (ior (match_operand 0 “general_operand”) (match_code “mem,const_int,const_double”)) { return ! m32c_illegal_subreg_p (op); } )
; Likewise for nonimmediate_operand.
(define_predicate “m32c_nonimmediate_operand” (ior (match_operand 0 “nonimmediate_operand”) (match_code “mem”)) { return ! m32c_illegal_subreg_p (op); } )
; TRUE if the operand is a pseudo-register. (define_predicate “m32c_pseudo” (ior (and (match_code “reg”) (match_test “REGNO(op) >= FIRST_PSEUDO_REGISTER”)) (and (match_code “subreg”) (and (match_test “GET_CODE (XEXP (op, 0)) == REG”) (match_test “REGNO(XEXP (op,0)) >= FIRST_PSEUDO_REGISTER”)))))
; Returning true causes many predicates to NOT match. We allow ; subregs for type changing, but not for size changing. (define_predicate “m32c_wide_subreg” (and (match_code “subreg”) (not (match_operand 0 “m32c_pseudo”))) { unsigned int sizeo = GET_MODE_SIZE (GET_MODE (op)); unsigned int sizei = GET_MODE_SIZE (GET_MODE (XEXP (op, 0))); sizeo = (sizeo + UNITS_PER_WORD - 1) / UNITS_PER_WORD; sizei = (sizei + UNITS_PER_WORD - 1) / UNITS_PER_WORD; return sizeo != sizei; })
; TRUE for r0 through r3, or a pseudo that reload could put in r0 ; through r3 (likewise for the next couple too) (define_predicate “r0123_operand” (ior (match_operand 0 “m32c_pseudo” "") (and (match_code “reg”) (match_test “REGNO(op) <= R3_REGNO”))))
; TRUE for r0 (define_predicate “m32c_r0_operand” (ior (match_operand 0 “m32c_pseudo” "") (and (match_code “reg”) (match_test “REGNO(op) == R0_REGNO”))))
; TRUE for r1 (define_predicate “m32c_r1_operand” (ior (match_operand 0 “m32c_pseudo” "") (and (match_code “reg”) (match_test “REGNO(op) == R1_REGNO”))))
; TRUE for HL_CLASS (r0 or r1) (define_predicate “m32c_hl_operand” (ior (match_operand 0 “m32c_pseudo” "") (and (match_code “reg”) (match_test “REGNO(op) == R0_REGNO || REGNO(op) == R1_REGNO”))))
; TRUE for r2 (define_predicate “m32c_r2_operand” (ior (match_operand 0 “m32c_pseudo” "") (and (match_code “reg”) (match_test “REGNO(op) == R2_REGNO”))))
; TRUE for r3 (define_predicate “m32c_r3_operand” (ior (match_operand 0 “m32c_pseudo” "") (and (match_code “reg”) (match_test “REGNO(op) == R3_REGNO”))))
; TRUE for any general operand except r2. (define_predicate “m32c_notr2_operand” (and (match_operand 0 “general_operand”) (ior (not (match_code “reg”)) (match_test “REGNO(op) != R2_REGNO”))))
; TRUE for the stack pointer. (define_predicate “m32c_sp_operand” (ior (match_operand 0 “m32c_pseudo” "") (and (match_code “reg”) (match_test “REGNO(op) == SP_REGNO”))))
; TRUE for control registers. (define_predicate “cr_operand” (match_code “reg”) “return (REGNO (op) >= SB_REGNO && REGNO (op) <= FLG_REGNO);”)
; TRUE for $a0 or $a1. (define_predicate “a_operand” (and (match_code “reg”) (match_test “REGNO (op) == A0_REGNO || REGNO (op) == A1_REGNO”)))
; TRUE for $a0 or $a1 or a pseudo (define_predicate “ap_operand” (ior (match_operand 0 “m32c_pseudo” "") (and (match_code “reg”) (match_test “REGNO (op) == A0_REGNO || REGNO (op) == A1_REGNO”))))
; TRUE for r0 through r3, or a0 or a1. (define_predicate “ra_operand” (and (and (match_operand 0 “register_operand” "") (not (match_operand 1 “cr_operand” ""))) (not (match_operand 2 “m32c_wide_subreg” ""))))
; Likewise, plus TRUE for memory references. (define_predicate “mra_operand” (and (and (match_operand 0 “m32c_nonimmediate_operand” "") (not (match_operand 1 “cr_operand” ""))) (not (match_operand 2 “m32c_wide_subreg” ""))))
; Likewise, plus TRUE for subregs. (define_predicate “mras_operand” (and (match_operand 0 “nonimmediate_operand” "") (not (match_operand 1 “cr_operand” ""))))
; As above, but no push/pop operations (define_predicate “mra_nopp_operand” (match_operand 0 “mra_operand” "") { if (GET_CODE (op) == MEM && (GET_CODE (XEXP (op, 0)) == PRE_DEC || (GET_CODE (XEXP (op, 0)) == POST_INC))) return 0; return 1; })
; TRUE for memory, r0..r3, a0..a1, or immediates. (define_predicate “mrai_operand” (and (and (match_operand 0 “m32c_any_operand” "") (not (match_operand 1 “cr_operand” ""))) (not (match_operand 2 “m32c_wide_subreg” ""))))
; Likewise, plus true for subregs. (define_predicate “mrasi_operand” (and (match_operand 0 “general_operand” "") (not (match_operand 1 “cr_operand” ""))))
; TRUE for r0..r3 or memory. (define_predicate “mr_operand” (and (match_operand 0 “mra_operand” "") (not (match_operand 1 “a_operand” ""))))
; TRUE for a0..a1 or memory. (define_predicate “ma_operand” (ior (match_operand 0 “a_operand” "") (match_operand 1 “memory_operand” "")))
; TRUE for memory operands that are not indexed (define_predicate “memsym_operand” (and (match_operand 0 “memory_operand” "") (match_test “satisfies_constraint_Si (op)”)))
; TRUE for memory operands with small integer addresses (define_predicate “memimmed_operand” (and (match_operand 0 “memory_operand” "") (match_test “satisfies_constraint_Sp (op)”)))
; TRUE for r1h. This is complicated since r1h isn't a register GCC ; normally knows about. (define_predicate “r1h_operand” (match_code “zero_extract”) { rtx reg = XEXP (op, 0); rtx size = XEXP (op, 1); rtx pos = XEXP (op, 2); return (GET_CODE (reg) == REG && REGNO (reg) == R1_REGNO && GET_CODE (size) == CONST_INT && INTVAL (size) == 8 && GET_CODE (pos) == CONST_INT && INTVAL (pos) == 8); })
; TRUE if we can shift by this amount. Constant shift counts have a ; limited range. (define_predicate “shiftcount_operand” (ior (match_operand 0 “mra_operand” "") (and (match_operand 2 “const_int_operand” "") (match_test “INTVAL (op) >= -8 && INTVAL (op) && INTVAL (op) <= 8”)))) (define_predicate “longshiftcount_operand” (ior (match_operand 0 “mra_operand” "") (and (match_operand 2 “const_int_operand” "") (match_test “INTVAL (op) >= -32 && INTVAL (op) && INTVAL (op) <= 32”))))
; TRUE for r0..r3, a0..a1, or sp. (define_predicate “mra_or_sp_operand” (and (ior (match_operand 0 “mra_operand”) (match_operand 1 “m32c_sp_operand”)) (not (match_operand 2 “m32c_wide_subreg” ""))))
; TRUE for r2 or r3. (define_predicate “m32c_r2r3_operand” (ior (and (match_code “reg”) (ior (match_test “REGNO(op) == R2_REGNO”) (match_test “REGNO(op) == R3_REGNO”))) (and (match_code “subreg”) (match_test “GET_CODE (XEXP (op, 0)) == REG && (REGNO (XEXP (op, 0)) == R2_REGNO || REGNO (XEXP (op, 0)) == R3_REGNO)”))))
; Likewise, plus TRUE for a0..a1. (define_predicate “m32c_r2r3a_operand” (ior (match_operand 0 “m32c_r2r3_operand” "") (match_operand 0 “a_operand” "")))
; These two are only for movqi - no subreg limit (define_predicate “mra_qi_operand” (and (and (match_operand 0 “m32c_nonimmediate_operand” "") (not (match_operand 1 “cr_operand” ""))) (not (match_operand 1 “m32c_r2r3a_operand” ""))))
(define_predicate “mrai_qi_operand” (and (and (match_operand 0 “m32c_any_operand” "") (not (match_operand 1 “cr_operand” ""))) (not (match_operand 1 “m32c_r2r3a_operand” ""))))
(define_predicate “a_qi_operand” (ior (match_operand 0 “m32c_pseudo” "") (match_operand 1 “a_operand” "")))
; TRUE for comparisons we support. (define_predicate “m32c_cmp_operator” (match_code “eq,ne,gt,gtu,lt,ltu,ge,geu,le,leu”))
(define_predicate “m32c_eqne_operator” (match_code “eq,ne”))
; TRUE for mem0 (define_predicate “m32c_mem0_operand” (ior (match_operand 0 “m32c_pseudo” "") (and (match_code “reg”) (match_test “REGNO(op) == MEM0_REGNO”))))
; TRUE for things the call patterns can return. (define_predicate “m32c_return_operand” (ior (match_operand 0 “m32c_r0_operand”) (ior (match_operand 0 “m32c_mem0_operand”) (match_code “parallel”))))
; TRUE for constants we can multiply pointers by (define_predicate “m32c_psi_scale” (and (match_operand 0 “const_int_operand”) (match_test “satisfies_constraint_Ilb (op)”)))
; TRUE for one bit set (bit) or clear (mask) out of N bits.
(define_predicate “m32c_1bit8_operand” (and (match_operand 0 “const_int_operand”) (match_test “satisfies_constraint_Ilb (op)”)))
(define_predicate “m32c_1bit16_operand” (and (match_operand 0 “const_int_operand”) (match_test “satisfies_constraint_Ilw (op)”)))
(define_predicate “m32c_1mask8_operand” (and (match_operand 0 “const_int_operand”) (match_test “satisfies_constraint_ImB (op)”)))
(define_predicate “m32c_1mask16_operand” (and (match_operand 0 “const_int_operand”) (match_test “satisfies_constraint_Imw (op)”)))