| ! { dg-do run } |
| ! Don't cycle by default through all options, just test -O0 and -O2, |
| ! as this is quite large test. |
| ! { dg-skip-if "" { ! run_expensive_tests } { "*" } { "-O0" "-O2" } } |
| |
| module m |
| type dl |
| integer :: a, b |
| integer, allocatable :: c(:,:) |
| integer :: d, e |
| integer, allocatable :: f |
| end type |
| type dt |
| integer :: g |
| type (dl), allocatable :: h(:) |
| integer :: i |
| type (dl) :: j(2, 2) |
| type (dl), allocatable :: k |
| end type |
| contains |
| subroutine ver_dl (obj, val, c, cl1, cu1, cl2, cu2, f) |
| type (dl), intent (in) :: obj |
| integer, intent (in) :: val, cl1, cu1, cl2, cu2 |
| logical, intent (in) :: c, f |
| if ((c .neqv. allocated (obj%c)) .or. (f .neqv. allocated (obj%f))) call abort |
| if (c) then |
| if (lbound (obj%c, 1) /= cl1 .or. ubound (obj%c, 1) /= cu1) call abort |
| if (lbound (obj%c, 2) /= cl2 .or. ubound (obj%c, 2) /= cu2) call abort |
| end if |
| if (val /= 0) then |
| if (obj%a /= val .or. obj%b /= val) call abort |
| if (obj%d /= val .or. obj%e /= val) call abort |
| if (c) then |
| if (any (obj%c /= val)) call abort |
| end if |
| if (f) then |
| if (obj%f /= val) call abort |
| end if |
| end if |
| end subroutine ver_dl |
| subroutine ver_dt (obj, val, h, hl, hu, k, c, cl1, cu1, cl2, cu2, f) |
| type (dt), intent (in) :: obj |
| integer, intent (in) :: val, hl, hu, cl1, cu1, cl2, cu2 |
| logical, intent (in) :: h, k, c, f |
| integer :: i, j |
| if ((h .neqv. allocated (obj%h)) .or. (k .neqv. allocated (obj%k))) call abort |
| if (h) then |
| if (lbound (obj%h, 1) /= hl .or. ubound (obj%h, 1) /= hu) call abort |
| do i = hl, hu |
| call ver_dl (obj%h(i), val, c, cl1, cu1, cl2, cu2, f) |
| end do |
| end if |
| do i = 1, 2 |
| do j = 1, 2 |
| call ver_dl (obj%j(i, j), val, c, cl1, cu1, cl2, cu2, f) |
| end do |
| end do |
| if (k) call ver_dl (obj%k, val, c, cl1, cu1, cl2, cu2, f) |
| if (val /= 0) then |
| if (obj%g /= val .or. obj%i /= val) call abort |
| end if |
| end subroutine ver_dt |
| subroutine alloc_dl (obj, val, c, cl1, cu1, cl2, cu2, f) |
| type (dl), intent (inout) :: obj |
| integer, intent (in) :: val, cl1, cu1, cl2, cu2 |
| logical, intent (in) :: c, f |
| if (val /= 0) then |
| obj%a = val |
| obj%b = val |
| obj%d = val |
| obj%e = val |
| end if |
| if (allocated (obj%c)) deallocate (obj%c) |
| if (c) then |
| allocate (obj%c(cl1:cu1, cl2:cu2)) |
| if (val /= 0) obj%c = val |
| end if |
| if (f) then |
| if (.not.allocated (obj%f)) allocate (obj%f) |
| if (val /= 0) obj%f = val |
| else |
| if (allocated (obj%f)) deallocate (obj%f) |
| end if |
| end subroutine alloc_dl |
| subroutine alloc_dt (obj, val, h, hl, hu, k, c, cl1, cu1, cl2, cu2, f) |
| type (dt), intent (inout) :: obj |
| integer, intent (in) :: val, hl, hu, cl1, cu1, cl2, cu2 |
| logical, intent (in) :: h, k, c, f |
| integer :: i, j |
| if (val /= 0) then |
| obj%g = val |
| obj%i = val |
| end if |
| if (allocated (obj%h)) deallocate (obj%h) |
| if (h) then |
| allocate (obj%h(hl:hu)) |
| do i = hl, hu |
| call alloc_dl (obj%h(i), val, c, cl1, cu1, cl2, cu2, f) |
| end do |
| end if |
| do i = 1, 2 |
| do j = 1, 2 |
| call alloc_dl (obj%j(i, j), val, c, cl1, cu1, cl2, cu2, f) |
| end do |
| end do |
| if (k) then |
| if (.not.allocated (obj%k)) allocate (obj%k) |
| call alloc_dl (obj%k, val, c, cl1, cu1, cl2, cu2, f) |
| else |
| if (allocated (obj%k)) deallocate (obj%k) |
| end if |
| end subroutine alloc_dt |
| end module m |
| use m |
| type (dt), allocatable :: y |
| call foo (y) |
| contains |
| subroutine foo (y) |
| use m |
| type (dt), allocatable :: x, y, z(:,:) |
| logical, parameter :: F = .false. |
| logical, parameter :: T = .true. |
| logical :: l |
| !$omp parallel private (x, y, z) |
| if (allocated (x) .or. allocated (y) .or. allocated (z)) call abort |
| !$omp end parallel |
| !$omp parallel firstprivate (x, y, z) |
| if (allocated (x) .or. allocated (y) .or. allocated (z)) call abort |
| !$omp end parallel |
| l = F |
| !$omp parallel sections lastprivate (x, y, z) firstprivate (l) |
| !$omp section |
| if (.not. l) then |
| if (allocated (x) .or. allocated (y) .or. allocated (z)) call abort |
| end if |
| !$omp section |
| if (.not. l) then |
| if (allocated (x) .or. allocated (y) .or. allocated (z)) call abort |
| end if |
| allocate (x, y, z(-3:-3,2:3)) |
| call alloc_dt (x, 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (x, 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call alloc_dt (y, 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| call ver_dt (y, 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| call alloc_dt (z(-3,2), 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (z(-3,2), 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call alloc_dt (z(-3,3), 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| call ver_dt (z(-3,3), 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| !$omp section |
| !$omp end parallel sections |
| if (.not.allocated (x) .or. .not.allocated (y)) call abort |
| if (.not.allocated (z)) call abort |
| if (lbound (z, 1) /= -3 .or. ubound (z, 1) /= -3) call abort |
| if (lbound (z, 2) /= 2 .or. ubound (z, 2) /= 3) call abort |
| call ver_dt (x, 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (y, 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| call ver_dt (z(-3,2), 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (z(-3,3), 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| call alloc_dt (x, 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call ver_dt (x, 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (y, 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call ver_dt (y, 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (z(-3,2), 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call ver_dt (z(-3,2), 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (z(-3,3), 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call ver_dt (z(-3,3), 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| !$omp parallel private (x, y, z) |
| call ver_dt (x, 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (x, 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (x, 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (y, 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (y, 14, T, 3, 4, F, T, 1, 1, 2, 4, T) |
| call ver_dt (y, 14, T, 3, 4, F, T, 1, 1, 2, 4, T) |
| call ver_dt (z(-3,2), 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (z(-3,2), 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (z(-3,2), 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (z(-3,3), 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (z(-3,3), 14, T, 3, 4, F, T, 1, 1, 2, 4, T) |
| call ver_dt (z(-3,3), 14, T, 3, 4, F, T, 1, 1, 2, 4, T) |
| !$omp end parallel |
| call ver_dt (x, 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (x, 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (y, 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (y, 14, T, 3, 4, F, T, 1, 1, 2, 4, T) |
| call ver_dt (z(-3,2), 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (z(-3,2), 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (z(-3,3), 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (z(-3,3), 14, T, 3, 4, F, T, 1, 1, 2, 4, T) |
| !$omp parallel private (x, y, z) |
| call ver_dt (x, 0, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (y, 0, T, 3, 4, F, T, 1, 1, 2, 4, T) |
| deallocate (x%h, x%k) |
| deallocate (y%h) |
| allocate (y%k) |
| call ver_dt (z(-3,2), 0, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (z(-3,3), 0, T, 3, 4, F, T, 1, 1, 2, 4, T) |
| deallocate (z(-3,2)%h, z(-3,2)%k) |
| deallocate (z(-3,3)%h) |
| allocate (z(-3,3)%k) |
| !$omp end parallel |
| call alloc_dt (x, 5, T, 1, 2, F, T, 2, 3, -2, -2, F) |
| call alloc_dt (y, 15, F, 0, 0, T, T, 2, 2, 2, 2, T) |
| call alloc_dt (z(-3,2), 5, T, 1, 2, F, T, 2, 3, -2, -2, F) |
| call alloc_dt (z(-3,3), 15, F, 0, 0, T, T, 2, 2, 2, 2, T) |
| !$omp parallel firstprivate (x, y, z) |
| call ver_dt (x, 5, T, 1, 2, F, T, 2, 3, -2, -2, F) |
| call alloc_dt (x, 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (x, 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (y, 15, F, 0, 0, T, T, 2, 2, 2, 2, T) |
| call alloc_dt (y, 4, T, 3, 4, T, T, 1, 1, 2, 4, T) |
| call ver_dt (y, 4, T, 3, 4, T, T, 1, 1, 2, 4, T) |
| call ver_dt (z(-3,2), 5, T, 1, 2, F, T, 2, 3, -2, -2, F) |
| call alloc_dt (z(-3,2), 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (z(-3,2), 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (z(-3,3), 15, F, 0, 0, T, T, 2, 2, 2, 2, T) |
| call alloc_dt (z(-3,3), 4, T, 3, 4, T, T, 1, 1, 2, 4, T) |
| call ver_dt (z(-3,3), 4, T, 3, 4, T, T, 1, 1, 2, 4, T) |
| !$omp end parallel |
| call ver_dt (x, 5, T, 1, 2, F, T, 2, 3, -2, -2, F) |
| call alloc_dt (x, 4, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call ver_dt (y, 15, F, 0, 0, T, T, 2, 2, 2, 2, T) |
| call alloc_dt (y, 16, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call ver_dt (z(-3,2), 5, T, 1, 2, F, T, 2, 3, -2, -2, F) |
| call alloc_dt (z(-3,2), 4, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call ver_dt (z(-3,3), 15, F, 0, 0, T, T, 2, 2, 2, 2, T) |
| call alloc_dt (z(-3,3), 16, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| !$omp parallel firstprivate (x, y, z) |
| call ver_dt (x, 4, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (x, 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (x, 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (y, 16, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (y, 17, T, 1, 2, F, T, 2, 2, 3, 3, F) |
| call ver_dt (y, 17, T, 1, 2, F, T, 2, 2, 3, 3, F) |
| call ver_dt (z(-3,2), 4, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (z(-3,2), 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (z(-3,2), 4, T, -3, -1, T, T, -1, -1, 2, 3, T) |
| call ver_dt (z(-3,3), 16, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (z(-3,3), 17, T, 1, 2, F, T, 2, 2, 3, 3, F) |
| call ver_dt (z(-3,3), 17, T, 1, 2, F, T, 2, 2, 3, 3, F) |
| !$omp end parallel |
| call ver_dt (x, 4, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call ver_dt (y, 16, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (y, 18, T, 0, 1, T, T, 0, 1, 0, 1, T) |
| call ver_dt (z(-3,2), 4, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call ver_dt (z(-3,3), 16, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call alloc_dt (z(-3,3), 18, T, 0, 1, T, T, 0, 1, 0, 1, T) |
| l = F |
| !$omp parallel sections lastprivate (x, y, z) firstprivate (l) |
| !$omp section |
| if (l) then |
| call ver_dt (x, 9, T, 1, 1, F, F, 0, 0, 0, 0, T) |
| call ver_dt (y, 21, F, 0, 0, T, T, 1, 2, 3, 4, T) |
| call ver_dt (z(-3,2), 9, T, 1, 1, F, F, 0, 0, 0, 0, T) |
| call ver_dt (z(-3,3), 21, F, 0, 0, T, T, 1, 2, 3, 4, T) |
| else |
| call ver_dt (x, 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call ver_dt (y, 0, T, 0, 1, T, T, 0, 1, 0, 1, T) |
| call ver_dt (z(-3,2), 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call ver_dt (z(-3,3), 0, T, 0, 1, T, T, 0, 1, 0, 1, T) |
| end if |
| l = T |
| call alloc_dt (x, 7, T, 1, 1, T, T, 1, 2, 3, 3, T) |
| call ver_dt (x, 7, T, 1, 1, T, T, 1, 2, 3, 3, T) |
| call alloc_dt (y, 20, T, 0, 0, F, T, 2, 2, 3, 4, F) |
| call ver_dt (y, 20, T, 0, 0, F, T, 2, 2, 3, 4, F) |
| call alloc_dt (z(-3,2), 7, T, 1, 1, T, T, 1, 2, 3, 3, T) |
| call ver_dt (z(-3,2), 7, T, 1, 1, T, T, 1, 2, 3, 3, T) |
| call alloc_dt (z(-3,3), 20, T, 0, 0, F, T, 2, 2, 3, 4, F) |
| call ver_dt (z(-3,3), 20, T, 0, 0, F, T, 2, 2, 3, 4, F) |
| !$omp section |
| if (l) then |
| call ver_dt (x, 7, T, 1, 1, T, T, 1, 2, 3, 3, T) |
| call ver_dt (y, 20, T, 0, 0, F, T, 2, 2, 3, 4, F) |
| call ver_dt (z(-3,2), 7, T, 1, 1, T, T, 1, 2, 3, 3, T) |
| call ver_dt (z(-3,3), 20, T, 0, 0, F, T, 2, 2, 3, 4, F) |
| else |
| call ver_dt (x, 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call ver_dt (y, 0, T, 0, 1, T, T, 0, 1, 0, 1, T) |
| call ver_dt (z(-3,2), 0, F, 0, 0, F, F, 0, 0, 0, 0, F) |
| call ver_dt (z(-3,3), 0, T, 0, 1, T, T, 0, 1, 0, 1, T) |
| end if |
| l = T |
| call alloc_dt (x, 9, T, 1, 1, F, F, 0, 0, 0, 0, T) |
| call ver_dt (x, 9, T, 1, 1, F, F, 0, 0, 0, 0, T) |
| call alloc_dt (y, 21, F, 0, 0, T, T, 1, 2, 3, 4, T) |
| call ver_dt (y, 21, F, 0, 0, T, T, 1, 2, 3, 4, T) |
| call alloc_dt (z(-3,2), 9, T, 1, 1, F, F, 0, 0, 0, 0, T) |
| call ver_dt (z(-3,2), 9, T, 1, 1, F, F, 0, 0, 0, 0, T) |
| call alloc_dt (z(-3,3), 21, F, 0, 0, T, T, 1, 2, 3, 4, T) |
| call ver_dt (z(-3,3), 21, F, 0, 0, T, T, 1, 2, 3, 4, T) |
| !$omp section |
| !$omp end parallel sections |
| call ver_dt (x, 9, T, 1, 1, F, F, 0, 0, 0, 0, T) |
| call ver_dt (y, 21, F, 0, 0, T, T, 1, 2, 3, 4, T) |
| call ver_dt (z(-3,2), 9, T, 1, 1, F, F, 0, 0, 0, 0, T) |
| call ver_dt (z(-3,3), 21, F, 0, 0, T, T, 1, 2, 3, 4, T) |
| !$omp parallel sections lastprivate (x, y, z) firstprivate (l) |
| !$omp section |
| if (l) then |
| call ver_dt (x, 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (y, 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| call ver_dt (z(-3,2), 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (z(-3,3), 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| else |
| call ver_dt (x, 0, T, 1, 1, F, F, 0, 0, 0, 0, T) |
| call ver_dt (y, 0, F, 0, 0, T, T, 1, 2, 3, 4, T) |
| call ver_dt (z(-3,2), 0, T, 1, 1, F, F, 0, 0, 0, 0, T) |
| call ver_dt (z(-3,3), 0, F, 0, 0, T, T, 1, 2, 3, 4, T) |
| end if |
| l = T |
| call alloc_dt (x, 3, F, 0, 0, T, T, 0, 1, 0, 1, F) |
| call ver_dt (x, 3, F, 0, 0, T, T, 0, 1, 0, 1, F) |
| call alloc_dt (y, 22, T, 5, 5, F, T, 2, 3, 2, 2, T) |
| call ver_dt (y, 22, T, 5, 5, F, T, 2, 3, 2, 2, T) |
| call alloc_dt (z(-3,2), 3, F, 0, 0, T, T, 0, 1, 0, 1, F) |
| call ver_dt (z(-3,2), 3, F, 0, 0, T, T, 0, 1, 0, 1, F) |
| call alloc_dt (z(-3,3), 22, T, 5, 5, F, T, 2, 3, 2, 2, T) |
| call ver_dt (z(-3,3), 22, T, 5, 5, F, T, 2, 3, 2, 2, T) |
| !$omp section |
| if (l) then |
| call ver_dt (x, 3, F, 0, 0, T, T, 0, 1, 0, 1, F) |
| call ver_dt (y, 22, T, 5, 5, F, T, 2, 3, 2, 2, T) |
| call ver_dt (z(-3,2), 3, F, 0, 0, T, T, 0, 1, 0, 1, F) |
| call ver_dt (z(-3,3), 22, T, 5, 5, F, T, 2, 3, 2, 2, T) |
| else |
| call ver_dt (x, 0, T, 1, 1, F, F, 0, 0, 0, 0, T) |
| call ver_dt (y, 0, F, 0, 0, T, T, 1, 2, 3, 4, T) |
| call ver_dt (z(-3,2), 0, T, 1, 1, F, F, 0, 0, 0, 0, T) |
| call ver_dt (z(-3,3), 0, F, 0, 0, T, T, 1, 2, 3, 4, T) |
| end if |
| l = T |
| call alloc_dt (x, 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (x, 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call alloc_dt (y, 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| call ver_dt (y, 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| call alloc_dt (z(-3,2), 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (z(-3,2), 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call alloc_dt (z(-3,3), 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| call ver_dt (z(-3,3), 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| !$omp section |
| !$omp end parallel sections |
| call ver_dt (x, 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (y, 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| call ver_dt (z(-3,2), 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (z(-3,3), 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| !$omp parallel private (x, y, z) |
| call ver_dt (x, 0, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (y, 0, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| call ver_dt (z(-3,2), 0, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (z(-3,3), 0, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| !$omp single |
| call alloc_dt (x, 3, F, 0, 0, T, T, 0, 1, 0, 1, F) |
| call alloc_dt (y, 22, T, 5, 5, F, T, 2, 3, 2, 2, T) |
| call alloc_dt (z(-3,2), 3, F, 0, 0, T, T, 0, 1, 0, 1, F) |
| call alloc_dt (z(-3,3), 22, T, 5, 5, F, T, 2, 3, 2, 2, T) |
| !$omp end single copyprivate (x, y, z) |
| call ver_dt (x, 3, F, 0, 0, T, T, 0, 1, 0, 1, F) |
| call ver_dt (y, 22, T, 5, 5, F, T, 2, 3, 2, 2, T) |
| call ver_dt (z(-3,2), 3, F, 0, 0, T, T, 0, 1, 0, 1, F) |
| call ver_dt (z(-3,3), 22, T, 5, 5, F, T, 2, 3, 2, 2, T) |
| !$omp end parallel |
| call ver_dt (x, 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (y, 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| call ver_dt (z(-3,2), 5, F, 0, 0, T, T, -1, -1, -1, -1, T) |
| call ver_dt (z(-3,3), 23, T, 0, 1, T, T, 2, 2, 2, 2, F) |
| end subroutine foo |
| end |